Move MPC5xxx_FEC driver to drivers/net

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

3 files changed, 1350 insertions, 0 deletions

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index bcf31cbe278..c68d3e7a200 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -41,6 +41,7 @@ COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
 COBJS-$(CONFIG_DRIVER_LAN91C96) += lan91c96.o
 COBJS-$(CONFIG_MACB) += macb.o
 COBJS-$(CONFIG_MCFFEC) += mcffec.o
+COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
 COBJS-$(CONFIG_NATSEMI) += natsemi.o
 ifeq ($(CONFIG_DRIVER_NE2000),y)
 COBJS-y += ne2000.o
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
new file mode 100644
index 00000000000..3d3eb8bae83
--- /dev/null
+++ b/drivers/net/mpc5xxx_fec.c
@@ -0,0 +1,1067 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on mpc4200fec.c,
+ * (C) Copyright Motorola, Inc., 2000
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <mpc5xxx_sdma.h>
+#include <malloc.h>
+#include <net.h>
+#include <miiphy.h>
+#include "mpc5xxx_fec.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* #define DEBUG	0x28 */
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+	defined(CONFIG_MPC5xxx_FEC)
+
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
+#error "CONFIG_MII has to be defined!"
+#endif
+
+#if (DEBUG & 0x60)
+static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec);
+static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec);
+#endif /* DEBUG */
+
+#if (DEBUG & 0x40)
+static uint32 local_crc32(char *string, unsigned int crc_value, int len);
+#endif
+
+typedef struct {
+    uint8 data[1500];           /* actual data */
+    int length;                 /* actual length */
+    int used;                   /* buffer in use or not */
+    uint8 head[16];             /* MAC header(6 + 6 + 2) + 2(aligned) */
+} NBUF;
+
+int fec5xxx_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal);
+int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data);
+
+/********************************************************************/
+#if (DEBUG & 0x2)
+static void mpc5xxx_fec_phydump (char *devname)
+{
+	uint16 phyStatus, i;
+	uint8 phyAddr = CONFIG_PHY_ADDR;
+	uint8 reg_mask[] = {
+#if CONFIG_PHY_TYPE == 0x79c874	/* AMD Am79C874 */
+		/* regs to print: 0...7, 16...19, 21, 23, 24 */
+		1, 1, 1, 1,  1, 1, 1, 1,     0, 0, 0, 0,  0, 0, 0, 0,
+		1, 1, 1, 1,  0, 1, 0, 1,     1, 0, 0, 0,  0, 0, 0, 0,
+#else
+		/* regs to print: 0...8, 16...20 */
+		1, 1, 1, 1,  1, 1, 1, 1,     1, 0, 0, 0,  0, 0, 0, 0,
+		1, 1, 1, 1,  1, 0, 0, 0,     0, 0, 0, 0,  0, 0, 0, 0,
+#endif
+	};
+
+	for (i = 0; i < 32; i++) {
+		if (reg_mask[i]) {
+			miiphy_read(devname, phyAddr, i, &phyStatus);
+			printf("Mii reg %d: 0x%04x\n", i, phyStatus);
+		}
+	}
+}
+#endif
+
+/********************************************************************/
+static int mpc5xxx_fec_rbd_init(mpc5xxx_fec_priv *fec)
+{
+	int ix;
+	char *data;
+	static int once = 0;
+
+	for (ix = 0; ix < FEC_RBD_NUM; ix++) {
+		if (!once) {
+			data = (char *)malloc(FEC_MAX_PKT_SIZE);
+			if (data == NULL) {
+				printf ("RBD INIT FAILED\n");
+				return -1;
+			}
+			fec->rbdBase[ix].dataPointer = (uint32)data;
+		}
+		fec->rbdBase[ix].status = FEC_RBD_EMPTY;
+		fec->rbdBase[ix].dataLength = 0;
+	}
+	once ++;
+
+	/*
+	 * have the last RBD to close the ring
+	 */
+	fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP;
+	fec->rbdIndex = 0;
+
+	return 0;
+}
+
+/********************************************************************/
+static void mpc5xxx_fec_tbd_init(mpc5xxx_fec_priv *fec)
+{
+	int ix;
+
+	for (ix = 0; ix < FEC_TBD_NUM; ix++) {
+		fec->tbdBase[ix].status = 0;
+	}
+
+	/*
+	 * Have the last TBD to close the ring
+	 */
+	fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP;
+
+	/*
+	 * Initialize some indices
+	 */
+	fec->tbdIndex = 0;
+	fec->usedTbdIndex = 0;
+	fec->cleanTbdNum = FEC_TBD_NUM;
+}
+
+/********************************************************************/
+static void mpc5xxx_fec_rbd_clean(mpc5xxx_fec_priv *fec, volatile FEC_RBD * pRbd)
+{
+	/*
+	 * Reset buffer descriptor as empty
+	 */
+	if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
+		pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
+	else
+		pRbd->status = FEC_RBD_EMPTY;
+
+	pRbd->dataLength = 0;
+
+	/*
+	 * Now, we have an empty RxBD, restart the SmartDMA receive task
+	 */
+	SDMA_TASK_ENABLE(FEC_RECV_TASK_NO);
+
+	/*
+	 * Increment BD count
+	 */
+	fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
+}
+
+/********************************************************************/
+static void mpc5xxx_fec_tbd_scrub(mpc5xxx_fec_priv *fec)
+{
+	volatile FEC_TBD *pUsedTbd;
+
+#if (DEBUG & 0x1)
+	printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
+		fec->cleanTbdNum, fec->usedTbdIndex);
+#endif
+
+	/*
+	 * process all the consumed TBDs
+	 */
+	while (fec->cleanTbdNum < FEC_TBD_NUM) {
+		pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
+		if (pUsedTbd->status & FEC_TBD_READY) {
+#if (DEBUG & 0x20)
+			printf("Cannot clean TBD %d, in use\n", fec->cleanTbdNum);
+#endif
+			return;
+		}
+
+		/*
+		 * clean this buffer descriptor
+		 */
+		if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
+			pUsedTbd->status = FEC_TBD_WRAP;
+		else
+			pUsedTbd->status = 0;
+
+		/*
+		 * update some indeces for a correct handling of the TBD ring
+		 */
+		fec->cleanTbdNum++;
+		fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
+	}
+}
+
+/********************************************************************/
+static void mpc5xxx_fec_set_hwaddr(mpc5xxx_fec_priv *fec, char *mac)
+{
+	uint8 currByte;			/* byte for which to compute the CRC */
+	int byte;			/* loop - counter */
+	int bit;			/* loop - counter */
+	uint32 crc = 0xffffffff;	/* initial value */
+
+	/*
+	 * The algorithm used is the following:
+	 * we loop on each of the six bytes of the provided address,
+	 * and we compute the CRC by left-shifting the previous
+	 * value by one position, so that each bit in the current
+	 * byte of the address may contribute the calculation. If
+	 * the latter and the MSB in the CRC are different, then
+	 * the CRC value so computed is also ex-ored with the
+	 * "polynomium generator". The current byte of the address
+	 * is also shifted right by one bit at each iteration.
+	 * This is because the CRC generatore in hardware is implemented
+	 * as a shift-register with as many ex-ores as the radixes
+	 * in the polynomium. This suggests that we represent the
+	 * polynomiumm itself as a 32-bit constant.
+	 */
+	for (byte = 0; byte < 6; byte++) {
+		currByte = mac[byte];
+		for (bit = 0; bit < 8; bit++) {
+			if ((currByte & 0x01) ^ (crc & 0x01)) {
+				crc >>= 1;
+				crc = crc ^ 0xedb88320;
+			} else {
+				crc >>= 1;
+			}
+			currByte >>= 1;
+		}
+	}
+
+	crc = crc >> 26;
+
+	/*
+	 * Set individual hash table register
+	 */
+	if (crc >= 32) {
+		fec->eth->iaddr1 = (1 << (crc - 32));
+		fec->eth->iaddr2 = 0;
+	} else {
+		fec->eth->iaddr1 = 0;
+		fec->eth->iaddr2 = (1 << crc);
+	}
+
+	/*
+	 * Set physical address
+	 */
+	fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
+	fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
+}
+
+/********************************************************************/
+static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
+{
+	mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
+	struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
+
+#if (DEBUG & 0x1)
+	printf ("mpc5xxx_fec_init... Begin\n");
+#endif
+
+	/*
+	 * Initialize RxBD/TxBD rings
+	 */
+	mpc5xxx_fec_rbd_init(fec);
+	mpc5xxx_fec_tbd_init(fec);
+
+	/*
+	 * Clear FEC-Lite interrupt event register(IEVENT)
+	 */
+	fec->eth->ievent = 0xffffffff;
+
+	/*
+	 * Set interrupt mask register
+	 */
+	fec->eth->imask = 0x00000000;
+
+	/*
+	 * Set FEC-Lite receive control register(R_CNTRL):
+	 */
+	if (fec->xcv_type == SEVENWIRE) {
+		/*
+		 * Frame length=1518; 7-wire mode
+		 */
+		fec->eth->r_cntrl = 0x05ee0020;	/*0x05ee0000;FIXME */
+	} else {
+		/*
+		 * Frame length=1518; MII mode;
+		 */
+		fec->eth->r_cntrl = 0x05ee0024;	/*0x05ee0004;FIXME */
+	}
+
+	fec->eth->x_cntrl = 0x00000000;	/* half-duplex, heartbeat disabled */
+	if (fec->xcv_type != SEVENWIRE) {
+		/*
+		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
+		 * and do not drop the Preamble.
+		 */
+		fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+	}
+
+	/*
+	 * Set Opcode/Pause Duration Register
+	 */
+	fec->eth->op_pause = 0x00010020;	/*FIXME 0xffff0020; */
+
+	/*
+	 * Set Rx FIFO alarm and granularity value
+	 */
+	fec->eth->rfifo_cntrl = 0x0c000000
+				| (fec->eth->rfifo_cntrl & ~0x0f000000);
+	fec->eth->rfifo_alarm = 0x0000030c;
+#if (DEBUG & 0x22)
+	if (fec->eth->rfifo_status & 0x00700000 ) {
+		printf("mpc5xxx_fec_init() RFIFO error\n");
+	}
+#endif
+
+	/*
+	 * Set Tx FIFO granularity value
+	 */
+	fec->eth->tfifo_cntrl = 0x0c000000
+				| (fec->eth->tfifo_cntrl & ~0x0f000000);
+#if (DEBUG & 0x2)
+	printf("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
+	printf("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
+#endif
+
+	/*
+	 * Set transmit fifo watermark register(X_WMRK), default = 64
+	 */
+	fec->eth->tfifo_alarm = 0x00000080;
+	fec->eth->x_wmrk = 0x2;
+
+	/*
+	 * Set individual address filter for unicast address
+	 * and set physical address registers.
+	 */
+	mpc5xxx_fec_set_hwaddr(fec, (char *)dev->enetaddr);
+
+	/*
+	 * Set multicast address filter
+	 */
+	fec->eth->gaddr1 = 0x00000000;
+	fec->eth->gaddr2 = 0x00000000;
+
+	/*
+	 * Turn ON cheater FSM: ????
+	 */
+	fec->eth->xmit_fsm = 0x03000000;
+
+#if defined(CONFIG_MPC5200)
+	/*
+	 * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
+	 * work w/ the current receive task.
+	 */
+	 sdma->PtdCntrl |= 0x00000001;
+#endif
+
+	/*
+	 * Set priority of different initiators
+	 */
+	sdma->IPR0 = 7;		/* always */
+	sdma->IPR3 = 6;		/* Eth RX */
+	sdma->IPR4 = 5;		/* Eth Tx */
+
+	/*
+	 * Clear SmartDMA task interrupt pending bits
+	 */
+	SDMA_CLEAR_IEVENT(FEC_RECV_TASK_NO);
+
+	/*
+	 * Initialize SmartDMA parameters stored in SRAM
+	 */
+	*(volatile int *)FEC_TBD_BASE = (int)fec->tbdBase;
+	*(volatile int *)FEC_RBD_BASE = (int)fec->rbdBase;
+	*(volatile int *)FEC_TBD_NEXT = (int)fec->tbdBase;
+	*(volatile int *)FEC_RBD_NEXT = (int)fec->rbdBase;
+
+	/*
+	 * Enable FEC-Lite controller
+	 */
+	fec->eth->ecntrl |= 0x00000006;
+
+#if (DEBUG & 0x2)
+	if (fec->xcv_type != SEVENWIRE)
+		mpc5xxx_fec_phydump (dev->name);
+#endif
+
+	/*
+	 * Enable SmartDMA receive task
+	 */
+	SDMA_TASK_ENABLE(FEC_RECV_TASK_NO);
+
+#if (DEBUG & 0x1)
+	printf("mpc5xxx_fec_init... Done \n");
+#endif
+
+	return 1;
+}
+
+/********************************************************************/
+static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
+{
+	mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
+	const uint8 phyAddr = CONFIG_PHY_ADDR;	/* Only one PHY */
+
+#if (DEBUG & 0x1)
+	printf ("mpc5xxx_fec_init_phy... Begin\n");
+#endif
+
+	/*
+	 * Initialize GPIO pins
+	 */
+	if (fec->xcv_type == SEVENWIRE) {
+		/*  10MBit with 7-wire operation */
+#if defined(CONFIG_TOTAL5200)
+		/* 7-wire and USB2 on Ethernet */
+		*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00030000;
+#else	/* !CONFIG_TOTAL5200 */
+		/* 7-wire only */
+		*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000;
+#endif	/* CONFIG_TOTAL5200 */
+	} else {
+		/* 100MBit with MD operation */
+		*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000;
+	}
+
+	/*
+	 * Clear FEC-Lite interrupt event register(IEVENT)
+	 */
+	fec->eth->ievent = 0xffffffff;
+
+	/*
+	 * Set interrupt mask register
+	 */
+	fec->eth->imask = 0x00000000;
+
+/*
+ * In original Promess-provided code PHY initialization is disabled with the
+ * following comment: "Phy initialization is DISABLED for now.  There was a
+ * problem with running 100 Mbps on PRO board". Thus we temporarily disable
+ * PHY initialization for the Motion-PRO board, until a proper fix is found.
+ */
+
+	if (fec->xcv_type != SEVENWIRE) {
+		/*
+		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
+		 * and do not drop the Preamble.
+		 */
+		fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1);	/* No MII for 7-wire mode */
+	}
+
+	if (fec->xcv_type != SEVENWIRE) {
+		/*
+		 * Initialize PHY(LXT971A):
+		 *
+		 *   Generally, on power up, the LXT971A reads its configuration
+		 *   pins to check for forced operation, If not cofigured for
+		 *   forced operation, it uses auto-negotiation/parallel detection
+		 *   to automatically determine line operating conditions.
+		 *   If the PHY device on the other side of the link supports
+		 *   auto-negotiation, the LXT971A auto-negotiates with it
+		 *   using Fast Link Pulse(FLP) Bursts. If the PHY partner does not
+		 *   support auto-negotiation, the LXT971A automatically detects
+		 *   the presence of either link pulses(10Mbps PHY) or Idle
+		 *   symbols(100Mbps) and sets its operating conditions accordingly.
+		 *
+		 *   When auto-negotiation is controlled by software, the following
+		 *   steps are recommended.
+		 *
+		 * Note:
+		 *   The physical address is dependent on hardware configuration.
+		 *
+		 */
+		int timeout = 1;
+		uint16 phyStatus;
+
+		/*
+		 * Reset PHY, then delay 300ns
+		 */
+		miiphy_write(dev->name, phyAddr, 0x0, 0x8000);
+		udelay(1000);
+
+#if defined(CONFIG_UC101) || defined(CONFIG_MUCMC52)
+		/* Set the LED configuration Register for the UC101
+		   and MUCMC52 Board */
+		miiphy_write(dev->name, phyAddr, 0x14, 0x4122);
+#endif
+		if (fec->xcv_type == MII10) {
+			/*
+			 * Force 10Base-T, FDX operation
+			 */
+#if (DEBUG & 0x2)
+			printf("Forcing 10 Mbps ethernet link... ");
+#endif
+			miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
+			/*
+			miiphy_write(dev->name, fec, phyAddr, 0x0, 0x0100);
+			*/
+			miiphy_write(dev->name, phyAddr, 0x0, 0x0180);
+
+			timeout = 20;
+			do {	/* wait for link status to go down */
+				udelay(10000);
+				if ((timeout--) == 0) {
+#if (DEBUG & 0x2)
+					printf("hmmm, should not have waited...");
+#endif
+					break;
+				}
+				miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
+#if (DEBUG & 0x2)
+				printf("=");
+#endif
+			} while ((phyStatus & 0x0004));	/* !link up */
+
+			timeout = 1000;
+			do {	/* wait for link status to come back up */
+				udelay(10000);
+				if ((timeout--) == 0) {
+					printf("failed. Link is down.\n");
+					break;
+				}
+				miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
+#if (DEBUG & 0x2)
+				printf("+");
+#endif
+			} while (!(phyStatus & 0x0004));	/* !link up */
+
+#if (DEBUG & 0x2)
+			printf ("done.\n");
+#endif
+		} else {	/* MII100 */
+			/*
+			 * Set the auto-negotiation advertisement register bits
+			 */
+			miiphy_write(dev->name, phyAddr, 0x4, 0x01e1);
+
+			/*
+			 * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
+			 */
+			miiphy_write(dev->name, phyAddr, 0x0, 0x1200);
+
+			/*
+			 * Wait for AN completion
+			 */
+			timeout = 5000;
+			do {
+				udelay(1000);
+
+				if ((timeout--) == 0) {
+#if (DEBUG & 0x2)
+					printf("PHY auto neg 0 failed...\n");
+#endif
+					return -1;
+				}
+
+				if (miiphy_read(dev->name, phyAddr, 0x1, &phyStatus) != 0) {
+#if (DEBUG & 0x2)
+					printf("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
+#endif
+					return -1;
+				}
+			} while (!(phyStatus & 0x0004));
+
+#if (DEBUG & 0x2)
+			printf("PHY auto neg complete! \n");
+#endif
+		}
+
+	}
+
+#if (DEBUG & 0x2)
+	if (fec->xcv_type != SEVENWIRE)
+		mpc5xxx_fec_phydump (dev->name);
+#endif
+
+
+#if (DEBUG & 0x1)
+	printf("mpc5xxx_fec_init_phy... Done \n");
+#endif
+
+	return 1;
+}
+
+/********************************************************************/
+static void mpc5xxx_fec_halt(struct eth_device *dev)
+{
+#if defined(CONFIG_MPC5200)
+	struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
+#endif
+	mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
+	int counter = 0xffff;
+
+#if (DEBUG & 0x2)
+	if (fec->xcv_type != SEVENWIRE)
+		mpc5xxx_fec_phydump (dev->name);
+#endif
+
+	/*
+	 * mask FEC chip interrupts
+	 */
+	fec->eth->imask = 0;
+
+	/*
+	 * issue graceful stop command to the FEC transmitter if necessary
+	 */
+	fec->eth->x_cntrl |= 0x00000001;
+
+	/*
+	 * wait for graceful stop to register
+	 */
+	while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ;
+
+	/*
+	 * Disable SmartDMA tasks
+	 */
+	SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
+	SDMA_TASK_DISABLE (FEC_RECV_TASK_NO);
+
+#if defined(CONFIG_MPC5200)
+	/*
+	 * Turn on COMM bus prefetch in the MGT5200 BestComm after we're
+	 * done. It doesn't work w/ the current receive task.
+	 */
+	 sdma->PtdCntrl &= ~0x00000001;
+#endif
+
+	/*
+	 * Disable the Ethernet Controller
+	 */
+	fec->eth->ecntrl &= 0xfffffffd;
+
+	/*
+	 * Clear FIFO status registers
+	 */
+	fec->eth->rfifo_status &= 0x00700000;
+	fec->eth->tfifo_status &= 0x00700000;
+
+	fec->eth->reset_cntrl = 0x01000000;
+
+	/*
+	 * Issue a reset command to the FEC chip
+	 */
+	fec->eth->ecntrl |= 0x1;
+
+	/*
+	 * wait at least 16 clock cycles
+	 */
+	udelay(10);
+
+#if (DEBUG & 0x3)
+	printf("Ethernet task stopped\n");
+#endif
+}
+
+#if (DEBUG & 0x60)
+/********************************************************************/
+
+static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec)
+{
+	uint16 phyAddr = CONFIG_PHY_ADDR;
+	uint16 phyStatus;
+
+	if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
+		|| (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
+
+		miiphy_read(devname, phyAddr, 0x1, &phyStatus);
+		printf("\nphyStatus: 0x%04x\n", phyStatus);
+		printf("ecntrl:   0x%08x\n", fec->eth->ecntrl);
+		printf("ievent:   0x%08x\n", fec->eth->ievent);
+		printf("x_status: 0x%08x\n", fec->eth->x_status);
+		printf("tfifo: status  0x%08x\n", fec->eth->tfifo_status);
+
+		printf("       control 0x%08x\n", fec->eth->tfifo_cntrl);
+		printf("       lrfp    0x%08x\n", fec->eth->tfifo_lrf_ptr);
+		printf("       lwfp    0x%08x\n", fec->eth->tfifo_lwf_ptr);
+		printf("       alarm   0x%08x\n", fec->eth->tfifo_alarm);
+		printf("       readptr 0x%08x\n", fec->eth->tfifo_rdptr);
+		printf("       writptr 0x%08x\n", fec->eth->tfifo_wrptr);
+	}
+}
+
+static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec)
+{
+	uint16 phyAddr = CONFIG_PHY_ADDR;
+	uint16 phyStatus;
+
+	if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
+		|| (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
+
+		miiphy_read(devname, phyAddr, 0x1, &phyStatus);
+		printf("\nphyStatus: 0x%04x\n", phyStatus);
+		printf("ecntrl:   0x%08x\n", fec->eth->ecntrl);
+		printf("ievent:   0x%08x\n", fec->eth->ievent);
+		printf("x_status: 0x%08x\n", fec->eth->x_status);
+		printf("rfifo: status  0x%08x\n", fec->eth->rfifo_status);
+
+		printf("       control 0x%08x\n", fec->eth->rfifo_cntrl);
+		printf("       lrfp    0x%08x\n", fec->eth->rfifo_lrf_ptr);
+		printf("       lwfp    0x%08x\n", fec->eth->rfifo_lwf_ptr);
+		printf("       alarm   0x%08x\n", fec->eth->rfifo_alarm);
+		printf("       readptr 0x%08x\n", fec->eth->rfifo_rdptr);
+		printf("       writptr 0x%08x\n", fec->eth->rfifo_wrptr);
+	}
+}
+#endif /* DEBUG */
+
+/********************************************************************/
+
+static int mpc5xxx_fec_send(struct eth_device *dev, volatile void *eth_data,
+		int data_length)
+{
+	/*
+	 * This routine transmits one frame.  This routine only accepts
+	 * 6-byte Ethernet addresses.
+	 */
+	mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
+	volatile FEC_TBD *pTbd;
+
+#if (DEBUG & 0x20)
+	printf("tbd status: 0x%04x\n", fec->tbdBase[0].status);
+	tfifo_print(dev->name, fec);
+#endif
+
+	/*
+	 * Clear Tx BD ring at first
+	 */
+	mpc5xxx_fec_tbd_scrub(fec);
+
+	/*
+	 * Check for valid length of data.
+	 */
+	if ((data_length > 1500) || (data_length <= 0)) {
+		return -1;
+	}
+
+	/*
+	 * Check the number of vacant TxBDs.
+	 */
+	if (fec->cleanTbdNum < 1) {
+#if (DEBUG & 0x20)
+		printf("No available TxBDs ...\n");
+#endif
+		return -1;
+	}
+
+	/*
+	 * Get the first TxBD to send the mac header
+	 */
+	pTbd = &fec->tbdBase[fec->tbdIndex];
+	pTbd->dataLength = data_length;
+	pTbd->dataPointer = (uint32)eth_data;
+	pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
+	fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
+
+#if (DEBUG & 0x100)
+	printf("SDMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
+#endif
+
+	/*
+	 * Kick the MII i/f
+	 */
+	if (fec->xcv_type != SEVENWIRE) {
+		uint16 phyStatus;
+		miiphy_read(dev->name, 0, 0x1, &phyStatus);
+	}
+
+	/*
+	 * Enable SmartDMA transmit task
+	 */
+
+#if (DEBUG & 0x20)
+	tfifo_print(dev->name, fec);
+#endif
+	SDMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
+#if (DEBUG & 0x20)
+	tfifo_print(dev->name, fec);
+#endif
+#if (DEBUG & 0x8)
+	printf( "+" );
+#endif
+
+	fec->cleanTbdNum -= 1;
+
+#if (DEBUG & 0x129) && (DEBUG & 0x80000000)
+	printf ("smartDMA ethernet Tx task enabled\n");
+#endif
+	/*
+	 * wait until frame is sent .
+	 */
+	while (pTbd->status & FEC_TBD_READY) {
+		udelay(10);
+#if (DEBUG & 0x8)
+		printf ("TDB status = %04x\n", pTbd->status);
+#endif
+	}
+
+	return 0;
+}
+
+
+/********************************************************************/
+static int mpc5xxx_fec_recv(struct eth_device *dev)
+{
+	/*
+	 * This command pulls one frame from the card
+	 */
+	mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
+	volatile FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
+	unsigned long ievent;
+	int frame_length, len = 0;
+	NBUF *frame;
+	uchar buff[FEC_MAX_PKT_SIZE];
+
+#if (DEBUG & 0x1)
+	printf ("mpc5xxx_fec_recv %d Start...\n", fec->rbdIndex);
+#endif
+#if (DEBUG & 0x8)
+	printf( "-" );
+#endif
+
+	/*
+	 * Check if any critical events have happened
+	 */
+	ievent = fec->eth->ievent;
+	fec->eth->ievent = ievent;
+	if (ievent & 0x20060000) {
+		/* BABT, Rx/Tx FIFO errors */
+		mpc5xxx_fec_halt(dev);
+		mpc5xxx_fec_init(dev, NULL);
+		return 0;
+	}
+	if (ievent & 0x80000000) {
+		/* Heartbeat error */
+		fec->eth->x_cntrl |= 0x00000001;
+	}
+	if (ievent & 0x10000000) {
+		/* Graceful stop complete */
+		if (fec->eth->x_cntrl & 0x00000001) {
+			mpc5xxx_fec_halt(dev);
+			fec->eth->x_cntrl &= ~0x00000001;
+			mpc5xxx_fec_init(dev, NULL);
+		}
+	}
+
+	if (!(pRbd->status & FEC_RBD_EMPTY)) {
+		if ((pRbd->status & FEC_RBD_LAST) && !(pRbd->status & FEC_RBD_ERR) &&
+			((pRbd->dataLength - 4) > 14)) {
+
+			/*
+			 * Get buffer address and size
+			 */
+			frame = (NBUF *)pRbd->dataPointer;
+			frame_length = pRbd->dataLength - 4;
+
+#if (DEBUG & 0x20)
+			{
+				int i;
+				printf("recv data hdr:");
+				for (i = 0; i < 14; i++)
+					printf("%x ", *(frame->head + i));
+				printf("\n");
+			}
+#endif
+			/*
+			 *  Fill the buffer and pass it to upper layers
+			 */
+			memcpy(buff, frame->head, 14);
+			memcpy(buff + 14, frame->data, frame_length);
+			NetReceive(buff, frame_length);
+			len = frame_length;
+		}
+		/*
+		 * Reset buffer descriptor as empty
+		 */
+		mpc5xxx_fec_rbd_clean(fec, pRbd);
+	}
+	SDMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
+	return len;
+}
+
+
+/********************************************************************/
+int mpc5xxx_fec_initialize(bd_t * bis)
+{
+	mpc5xxx_fec_priv *fec;
+	struct eth_device *dev;
+	char *tmp, *end;
+	char env_enetaddr[6];
+	int i;
+
+	fec = (mpc5xxx_fec_priv *)malloc(sizeof(*fec));
+	dev = (struct eth_device *)malloc(sizeof(*dev));
+	memset(dev, 0, sizeof *dev);
+
+	fec->eth = (ethernet_regs *)MPC5XXX_FEC;
+	fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
+	fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
+#if defined(CONFIG_CANMB)		|| \
+	defined(CONFIG_CM5200)		|| \
+	defined(CONFIG_HMI1001)		|| \
+	defined(CONFIG_ICECUBE)		|| \
+	defined(CONFIG_INKA4X0)		|| \
+	defined(CONFIG_JUPITER)		|| \
+	defined(CONFIG_MCC200)		|| \
+	defined(CONFIG_MOTIONPRO)	|| \
+	defined(CONFIG_MUCMC52)		|| \
+	defined(CONFIG_O2DNT)		|| \
+	defined(CONFIG_PM520)		|| \
+	defined(CONFIG_TOP5200)		|| \
+	defined(CONFIG_TQM5200)		|| \
+	defined(CONFIG_UC101)		|| \
+	defined(CONFIG_V38B)		|| \
+	defined(CONFIG_MUNICES)
+# ifndef CONFIG_FEC_10MBIT
+	fec->xcv_type = MII100;
+# else
+	fec->xcv_type = MII10;
+# endif
+#elif defined(CONFIG_TOTAL5200)
+	fec->xcv_type = SEVENWIRE;
+#else
+#error fec->xcv_type not initialized.
+#endif
+
+	dev->priv = (void *)fec;
+	dev->iobase = MPC5XXX_FEC;
+	dev->init = mpc5xxx_fec_init;
+	dev->halt = mpc5xxx_fec_halt;
+	dev->send = mpc5xxx_fec_send;
+	dev->recv = mpc5xxx_fec_recv;
+
+	sprintf(dev->name, "FEC ETHERNET");
+	eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+	miiphy_register (dev->name,
+			fec5xxx_miiphy_read, fec5xxx_miiphy_write);
+#endif
+
+	/*
+	 * Try to set the mac address now. The fec mac address is
+	 * a garbage after reset. When not using fec for booting
+	 * the Linux fec driver will try to work with this garbage.
+	 */
+	tmp = getenv("ethaddr");
+	if (tmp) {
+		for (i=0; i<6; i++) {
+			env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+			if (tmp)
+				tmp = (*end) ? end+1 : end;
+		}
+		mpc5xxx_fec_set_hwaddr(fec, env_enetaddr);
+	}
+
+	mpc5xxx_fec_init_phy(dev, bis);
+
+	return 1;
+}
+
+/* MII-interface related functions */
+/********************************************************************/
+int fec5xxx_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal)
+{
+	ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC;
+	uint32 reg;		/* convenient holder for the PHY register */
+	uint32 phy;		/* convenient holder for the PHY */
+	int timeout = 0xffff;
+
+	/*
+	 * reading from any PHY's register is done by properly
+	 * programming the FEC's MII data register.
+	 */
+	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
+	phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
+
+	eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg);
+
+	/*
+	 * wait for the related interrupt
+	 */
+	while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
+
+	if (timeout == 0) {
+#if (DEBUG & 0x2)
+		printf ("Read MDIO failed...\n");
+#endif
+		return -1;
+	}
+
+	/*
+	 * clear mii interrupt bit
+	 */
+	eth->ievent = 0x00800000;
+
+	/*
+	 * it's now safe to read the PHY's register
+	 */
+	*retVal = (uint16) eth->mii_data;
+
+	return 0;
+}
+
+/********************************************************************/
+int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data)
+{
+	ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC;
+	uint32 reg;		/* convenient holder for the PHY register */
+	uint32 phy;		/* convenient holder for the PHY */
+	int timeout = 0xffff;
+
+	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
+	phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
+
+	eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
+			FEC_MII_DATA_TA | phy | reg | data);
+
+	/*
+	 * wait for the MII interrupt
+	 */
+	while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
+
+	if (timeout == 0) {
+#if (DEBUG & 0x2)
+		printf ("Write MDIO failed...\n");
+#endif
+		return -1;
+	}
+
+	/*
+	 * clear MII interrupt bit
+	 */
+	eth->ievent = 0x00800000;
+
+	return 0;
+}
+
+#if (DEBUG & 0x40)
+static uint32 local_crc32(char *string, unsigned int crc_value, int len)
+{
+	int i;
+	char c;
+	unsigned int crc, count;
+
+	/*
+	 * crc32 algorithm
+	 */
+	/*
+	 * crc = 0xffffffff; * The initialized value should be 0xffffffff
+	 */
+	crc = crc_value;
+
+	for (i = len; --i >= 0;) {
+		c = *string++;
+		for (count = 0; count < 8; count++) {
+			if ((c & 0x01) ^ (crc & 0x01)) {
+				crc >>= 1;
+				crc = crc ^ 0xedb88320;
+			} else {
+				crc >>= 1;
+			}
+			c >>= 1;
+		}
+	}
+
+	/*
+	 * In big endian system, do byte swaping for crc value
+	 */
+	 /**/ return crc;
+}
+#endif	/* DEBUG */
+
+#endif /* CONFIG_MPC5xxx_FEC */
diff --git a/drivers/net/mpc5xxx_fec.h b/drivers/net/mpc5xxx_fec.h
new file mode 100644
index 00000000000..16c3e8e9186
--- /dev/null
+++ b/drivers/net/mpc5xxx_fec.h
@@ -0,0 +1,282 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This file is based on mpc4200fec.h
+ * (C) Copyright Motorola, Inc., 2000
+ *
+ * odin ethernet header file
+ */
+
+#ifndef __MPC5XXX_FEC_H
+#define __MPC5XXX_FEC_H
+
+typedef unsigned long uint32;
+typedef unsigned short uint16;
+typedef unsigned char uint8;
+
+typedef struct ethernet_register_set {
+
+/* [10:2]addr = 00 */
+
+/*  Control and status Registers (offset 000-1FF) */
+
+	volatile uint32 fec_id;			/* MBAR_ETH + 0x000 */
+	volatile uint32 ievent;			/* MBAR_ETH + 0x004 */
+	volatile uint32 imask;			/* MBAR_ETH + 0x008 */
+
+	volatile uint32 RES0[1];		/* MBAR_ETH + 0x00C */
+	volatile uint32 r_des_active;		/* MBAR_ETH + 0x010 */
+	volatile uint32 x_des_active;		/* MBAR_ETH + 0x014 */
+	volatile uint32 r_des_active_cl;	/* MBAR_ETH + 0x018 */
+	volatile uint32 x_des_active_cl;	/* MBAR_ETH + 0x01C */
+	volatile uint32 ivent_set;		/* MBAR_ETH + 0x020 */
+	volatile uint32 ecntrl;			/* MBAR_ETH + 0x024 */
+
+	volatile uint32 RES1[6];		/* MBAR_ETH + 0x028-03C */
+	volatile uint32 mii_data;		/* MBAR_ETH + 0x040 */
+	volatile uint32 mii_speed;		/* MBAR_ETH + 0x044 */
+	volatile uint32 mii_status;		/* MBAR_ETH + 0x048 */
+
+	volatile uint32 RES2[5];		/* MBAR_ETH + 0x04C-05C */
+	volatile uint32 mib_data;		/* MBAR_ETH + 0x060 */
+	volatile uint32 mib_control;		/* MBAR_ETH + 0x064 */
+
+	volatile uint32 RES3[6];		/* MBAR_ETH + 0x068-7C */
+	volatile uint32 r_activate;		/* MBAR_ETH + 0x080 */
+	volatile uint32 r_cntrl;		/* MBAR_ETH + 0x084 */
+	volatile uint32 r_hash;			/* MBAR_ETH + 0x088 */
+	volatile uint32 r_data;			/* MBAR_ETH + 0x08C */
+	volatile uint32 ar_done;		/* MBAR_ETH + 0x090 */
+	volatile uint32 r_test;			/* MBAR_ETH + 0x094 */
+	volatile uint32 r_mib;			/* MBAR_ETH + 0x098 */
+	volatile uint32 r_da_low;		/* MBAR_ETH + 0x09C */
+	volatile uint32 r_da_high;		/* MBAR_ETH + 0x0A0 */
+
+	volatile uint32 RES4[7];		/* MBAR_ETH + 0x0A4-0BC */
+	volatile uint32 x_activate;		/* MBAR_ETH + 0x0C0 */
+	volatile uint32 x_cntrl;		/* MBAR_ETH + 0x0C4 */
+	volatile uint32 backoff;		/* MBAR_ETH + 0x0C8 */
+	volatile uint32 x_data;			/* MBAR_ETH + 0x0CC */
+	volatile uint32 x_status;		/* MBAR_ETH + 0x0D0 */
+	volatile uint32 x_mib;			/* MBAR_ETH + 0x0D4 */
+	volatile uint32 x_test;			/* MBAR_ETH + 0x0D8 */
+	volatile uint32 fdxfc_da1;		/* MBAR_ETH + 0x0DC */
+	volatile uint32 fdxfc_da2;		/* MBAR_ETH + 0x0E0 */
+	volatile uint32 paddr1;			/* MBAR_ETH + 0x0E4 */
+	volatile uint32 paddr2;			/* MBAR_ETH + 0x0E8 */
+	volatile uint32 op_pause;		/* MBAR_ETH + 0x0EC */
+
+	volatile uint32 RES5[4];		/* MBAR_ETH + 0x0F0-0FC */
+	volatile uint32 instr_reg;		/* MBAR_ETH + 0x100 */
+	volatile uint32 context_reg;		/* MBAR_ETH + 0x104 */
+	volatile uint32 test_cntrl;		/* MBAR_ETH + 0x108 */
+	volatile uint32 acc_reg;		/* MBAR_ETH + 0x10C */
+	volatile uint32 ones;			/* MBAR_ETH + 0x110 */
+	volatile uint32 zeros;			/* MBAR_ETH + 0x114 */
+	volatile uint32 iaddr1;			/* MBAR_ETH + 0x118 */
+	volatile uint32 iaddr2;			/* MBAR_ETH + 0x11C */
+	volatile uint32 gaddr1;			/* MBAR_ETH + 0x120 */
+	volatile uint32 gaddr2;			/* MBAR_ETH + 0x124 */
+	volatile uint32 random;			/* MBAR_ETH + 0x128 */
+	volatile uint32 rand1;			/* MBAR_ETH + 0x12C */
+	volatile uint32 tmp;			/* MBAR_ETH + 0x130 */
+
+	volatile uint32 RES6[3];		/* MBAR_ETH + 0x134-13C */
+	volatile uint32 fifo_id;		/* MBAR_ETH + 0x140 */
+	volatile uint32 x_wmrk;			/* MBAR_ETH + 0x144 */
+	volatile uint32 fcntrl;			/* MBAR_ETH + 0x148 */
+	volatile uint32 r_bound;		/* MBAR_ETH + 0x14C */
+	volatile uint32 r_fstart;		/* MBAR_ETH + 0x150 */
+	volatile uint32 r_count;		/* MBAR_ETH + 0x154 */
+	volatile uint32 r_lag;			/* MBAR_ETH + 0x158 */
+	volatile uint32 r_read;			/* MBAR_ETH + 0x15C */
+	volatile uint32 r_write;		/* MBAR_ETH + 0x160 */
+	volatile uint32 x_count;		/* MBAR_ETH + 0x164 */
+	volatile uint32 x_lag;			/* MBAR_ETH + 0x168 */
+	volatile uint32 x_retry;		/* MBAR_ETH + 0x16C */
+	volatile uint32 x_write;		/* MBAR_ETH + 0x170 */
+	volatile uint32 x_read;			/* MBAR_ETH + 0x174 */
+
+	volatile uint32 RES7[2];		/* MBAR_ETH + 0x178-17C */
+	volatile uint32 fm_cntrl;		/* MBAR_ETH + 0x180 */
+	volatile uint32 rfifo_data;		/* MBAR_ETH + 0x184 */
+	volatile uint32 rfifo_status;		/* MBAR_ETH + 0x188 */
+	volatile uint32 rfifo_cntrl;		/* MBAR_ETH + 0x18C */
+	volatile uint32 rfifo_lrf_ptr;		/* MBAR_ETH + 0x190 */
+	volatile uint32 rfifo_lwf_ptr;		/* MBAR_ETH + 0x194 */
+	volatile uint32 rfifo_alarm;		/* MBAR_ETH + 0x198 */
+	volatile uint32 rfifo_rdptr;		/* MBAR_ETH + 0x19C */
+	volatile uint32 rfifo_wrptr;		/* MBAR_ETH + 0x1A0 */
+	volatile uint32 tfifo_data;		/* MBAR_ETH + 0x1A4 */
+	volatile uint32 tfifo_status;		/* MBAR_ETH + 0x1A8 */
+	volatile uint32 tfifo_cntrl;		/* MBAR_ETH + 0x1AC */
+	volatile uint32 tfifo_lrf_ptr;		/* MBAR_ETH + 0x1B0 */
+	volatile uint32 tfifo_lwf_ptr;		/* MBAR_ETH + 0x1B4 */
+	volatile uint32 tfifo_alarm;		/* MBAR_ETH + 0x1B8 */
+	volatile uint32 tfifo_rdptr;		/* MBAR_ETH + 0x1BC */
+	volatile uint32 tfifo_wrptr;		/* MBAR_ETH + 0x1C0 */
+
+	volatile uint32 reset_cntrl;		/* MBAR_ETH + 0x1C4 */
+	volatile uint32 xmit_fsm;		/* MBAR_ETH + 0x1C8 */
+
+	volatile uint32 RES8[3];		/* MBAR_ETH + 0x1CC-1D4 */
+	volatile uint32 rdes_data0;		/* MBAR_ETH + 0x1D8 */
+	volatile uint32 rdes_data1;		/* MBAR_ETH + 0x1DC */
+	volatile uint32 r_length;		/* MBAR_ETH + 0x1E0 */
+	volatile uint32 x_length;		/* MBAR_ETH + 0x1E4 */
+	volatile uint32 x_addr;			/* MBAR_ETH + 0x1E8 */
+	volatile uint32 cdes_data;		/* MBAR_ETH + 0x1EC */
+	volatile uint32 status;			/* MBAR_ETH + 0x1F0 */
+	volatile uint32 dma_control;		/* MBAR_ETH + 0x1F4 */
+	volatile uint32 des_cmnd;		/* MBAR_ETH + 0x1F8 */
+	volatile uint32 data;			/* MBAR_ETH + 0x1FC */
+
+/*  MIB COUNTERS (Offset 200-2FF) */
+
+	volatile uint32 rmon_t_drop;		/* MBAR_ETH + 0x200 */
+	volatile uint32 rmon_t_packets;		/* MBAR_ETH + 0x204 */
+	volatile uint32 rmon_t_bc_pkt;		/* MBAR_ETH + 0x208 */
+	volatile uint32 rmon_t_mc_pkt;		/* MBAR_ETH + 0x20C */
+	volatile uint32 rmon_t_crc_align;	/* MBAR_ETH + 0x210 */
+	volatile uint32 rmon_t_undersize;	/* MBAR_ETH + 0x214 */
+	volatile uint32 rmon_t_oversize;	/* MBAR_ETH + 0x218 */
+	volatile uint32 rmon_t_frag;		/* MBAR_ETH + 0x21C */
+	volatile uint32 rmon_t_jab;		/* MBAR_ETH + 0x220 */
+	volatile uint32 rmon_t_col;		/* MBAR_ETH + 0x224 */
+	volatile uint32 rmon_t_p64;		/* MBAR_ETH + 0x228 */
+	volatile uint32 rmon_t_p65to127;	/* MBAR_ETH + 0x22C */
+	volatile uint32 rmon_t_p128to255;	/* MBAR_ETH + 0x230 */
+	volatile uint32 rmon_t_p256to511;	/* MBAR_ETH + 0x234 */
+	volatile uint32 rmon_t_p512to1023;	/* MBAR_ETH + 0x238 */
+	volatile uint32 rmon_t_p1024to2047;	/* MBAR_ETH + 0x23C */
+	volatile uint32 rmon_t_p_gte2048;	/* MBAR_ETH + 0x240 */
+	volatile uint32 rmon_t_octets;		/* MBAR_ETH + 0x244 */
+	volatile uint32 ieee_t_drop;		/* MBAR_ETH + 0x248 */
+	volatile uint32 ieee_t_frame_ok;	/* MBAR_ETH + 0x24C */
+	volatile uint32 ieee_t_1col;		/* MBAR_ETH + 0x250 */
+	volatile uint32 ieee_t_mcol;		/* MBAR_ETH + 0x254 */
+	volatile uint32 ieee_t_def;		/* MBAR_ETH + 0x258 */
+	volatile uint32 ieee_t_lcol;		/* MBAR_ETH + 0x25C */
+	volatile uint32 ieee_t_excol;		/* MBAR_ETH + 0x260 */
+	volatile uint32 ieee_t_macerr;		/* MBAR_ETH + 0x264 */
+	volatile uint32 ieee_t_cserr;		/* MBAR_ETH + 0x268 */
+	volatile uint32 ieee_t_sqe;		/* MBAR_ETH + 0x26C */
+	volatile uint32 t_fdxfc;		/* MBAR_ETH + 0x270 */
+	volatile uint32 ieee_t_octets_ok;	/* MBAR_ETH + 0x274 */
+
+	volatile uint32 RES9[2];		/* MBAR_ETH + 0x278-27C */
+	volatile uint32 rmon_r_drop;		/* MBAR_ETH + 0x280 */
+	volatile uint32 rmon_r_packets;		/* MBAR_ETH + 0x284 */
+	volatile uint32 rmon_r_bc_pkt;		/* MBAR_ETH + 0x288 */
+	volatile uint32 rmon_r_mc_pkt;		/* MBAR_ETH + 0x28C */
+	volatile uint32 rmon_r_crc_align;	/* MBAR_ETH + 0x290 */
+	volatile uint32 rmon_r_undersize;	/* MBAR_ETH + 0x294 */
+	volatile uint32 rmon_r_oversize;	/* MBAR_ETH + 0x298 */
+	volatile uint32 rmon_r_frag;		/* MBAR_ETH + 0x29C */
+	volatile uint32 rmon_r_jab;		/* MBAR_ETH + 0x2A0 */
+
+	volatile uint32 rmon_r_resvd_0;		/* MBAR_ETH + 0x2A4 */
+
+	volatile uint32 rmon_r_p64;		/* MBAR_ETH + 0x2A8 */
+	volatile uint32 rmon_r_p65to127;	/* MBAR_ETH + 0x2AC */
+	volatile uint32 rmon_r_p128to255;	/* MBAR_ETH + 0x2B0 */
+	volatile uint32 rmon_r_p256to511;	/* MBAR_ETH + 0x2B4 */
+	volatile uint32 rmon_r_p512to1023;	/* MBAR_ETH + 0x2B8 */
+	volatile uint32 rmon_r_p1024to2047;	/* MBAR_ETH + 0x2BC */
+	volatile uint32 rmon_r_p_gte2048;	/* MBAR_ETH + 0x2C0 */
+	volatile uint32 rmon_r_octets;		/* MBAR_ETH + 0x2C4 */
+	volatile uint32 ieee_r_drop;		/* MBAR_ETH + 0x2C8 */
+	volatile uint32 ieee_r_frame_ok;	/* MBAR_ETH + 0x2CC */
+	volatile uint32 ieee_r_crc;		/* MBAR_ETH + 0x2D0 */
+	volatile uint32 ieee_r_align;		/* MBAR_ETH + 0x2D4 */
+	volatile uint32 r_macerr;		/* MBAR_ETH + 0x2D8 */
+	volatile uint32 r_fdxfc;		/* MBAR_ETH + 0x2DC */
+	volatile uint32 ieee_r_octets_ok;	/* MBAR_ETH + 0x2E0 */
+
+	volatile uint32 RES10[6];		/* MBAR_ETH + 0x2E4-2FC */
+
+	volatile uint32 RES11[64];		/* MBAR_ETH + 0x300-3FF */
+} ethernet_regs;
+
+/* Receive & Transmit Buffer Descriptor definitions */
+typedef struct BufferDescriptor {
+	uint16 status;
+	uint16 dataLength;
+	uint32 dataPointer;
+} FEC_RBD;
+typedef struct {
+	uint16 status;
+	uint16 dataLength;
+	uint32 dataPointer;
+} FEC_TBD;
+
+/* private structure */
+typedef enum {
+	SEVENWIRE,			/* 7-wire       */
+	MII10,				/* MII 10Mbps   */
+	MII100				/* MII 100Mbps  */
+} xceiver_type;
+
+typedef struct {
+	ethernet_regs *eth;
+	xceiver_type xcv_type;		/* transceiver type */
+	FEC_RBD *rbdBase;		/* RBD ring */
+	FEC_TBD *tbdBase;		/* TBD ring */
+	uint16 rbdIndex;		/* next receive BD to read */
+	uint16 tbdIndex;		/* next transmit BD to send */
+	uint16 usedTbdIndex;		/* next transmit BD to clean */
+	uint16 cleanTbdNum;		/* the number of available transmit BDs */
+} mpc5xxx_fec_priv;
+
+/* Ethernet parameter area */
+#define FEC_TBD_BASE		(FEC_PARAM_BASE + 0x00)
+#define FEC_TBD_NEXT		(FEC_PARAM_BASE + 0x04)
+#define FEC_RBD_BASE		(FEC_PARAM_BASE + 0x08)
+#define FEC_RBD_NEXT		(FEC_PARAM_BASE + 0x0c)
+
+/* BD Numer definitions */
+#define FEC_TBD_NUM		48	/* The user can adjust this value */
+#define FEC_RBD_NUM		32	/* The user can adjust this value */
+
+/* packet size limit */
+#define FEC_MAX_PKT_SIZE	1536
+
+/* RBD bits definitions */
+#define FEC_RBD_EMPTY		0x8000	/* Buffer is empty */
+#define FEC_RBD_WRAP		0x2000	/* Last BD in ring */
+#define FEC_RBD_INT		0x1000	/* Interrupt */
+#define FEC_RBD_LAST		0x0800	/* Buffer is last in frame(useless) */
+#define FEC_RBD_MISS		0x0100	/* Miss bit for prom mode */
+#define FEC_RBD_BC		0x0080	/* The received frame is broadcast frame */
+#define FEC_RBD_MC		0x0040	/* The received frame is multicast frame */
+#define FEC_RBD_LG		0x0020	/* Frame length violation */
+#define FEC_RBD_NO		0x0010	/* Nonoctet align frame */
+#define FEC_RBD_SH		0x0008	/* Short frame */
+#define FEC_RBD_CR		0x0004	/* CRC error */
+#define FEC_RBD_OV		0x0002	/* Receive FIFO overrun */
+#define FEC_RBD_TR		0x0001	/* Frame is truncated */
+#define FEC_RBD_ERR		(FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \
+				FEC_RBD_OV | FEC_RBD_TR)
+
+/* TBD bits definitions */
+#define FEC_TBD_READY		0x8000	/* Buffer is ready */
+#define FEC_TBD_WRAP		0x2000	/* Last BD in ring */
+#define FEC_TBD_INT		0x1000	/* Interrupt */
+#define FEC_TBD_LAST		0x0800	/* Buffer is last in frame */
+#define FEC_TBD_TC		0x0400	/* Transmit the CRC */
+#define FEC_TBD_ABC		0x0200	/* Append bad CRC */
+
+/* MII-related definitios */
+#define FEC_MII_DATA_ST		0x40000000	/* Start of frame delimiter */
+#define FEC_MII_DATA_OP_RD	0x20000000	/* Perform a read operation */
+#define FEC_MII_DATA_OP_WR	0x10000000	/* Perform a write operation */
+#define FEC_MII_DATA_PA_MSK	0x0f800000	/* PHY Address field mask */
+#define FEC_MII_DATA_RA_MSK	0x007c0000	/* PHY Register field mask */
+#define FEC_MII_DATA_TA		0x00020000	/* Turnaround */
+#define FEC_MII_DATA_DATAMSK	0x0000ffff	/* PHY data field */
+
+#define FEC_MII_DATA_RA_SHIFT	18	/* MII Register address bits */
+#define FEC_MII_DATA_PA_SHIFT	23	/* MII PHY address bits */
+
+#endif	/* __MPC5XXX_FEC_H */