diff options
| author | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2014-12-15 23:26:06 +0900 |
|---|---|---|
| committer | Tom Rini <trini@ti.com> | 2015-01-05 12:08:50 -0500 |
| commit | 5d2a5ef712914fe1c3edfcde78134dc4dc83f461 (patch) | |
| tree | cbef611c664ab229fff50bd5947f563a4cc3a139 /include/commproc.h | |
| parent | a2ee47d5f6d010e92e956a8fa9b62fe220d61bf6 (diff) | |
mpc8xx: remove FPS{850, 860}L, NSCU, SM850, TK885D, virtlab2 support
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'include/commproc.h')
| -rw-r--r-- | include/commproc.h | 55 |
1 files changed, 1 insertions, 54 deletions
diff --git a/include/commproc.h b/include/commproc.h index 6875c4c754..3e19603566 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -510,31 +510,6 @@ typedef struct scc_enet { #endif -/*** FPS850L, FPS860L ************************************************/ - -#if defined(CONFIG_FPS850L) || defined(CONFIG_FPS860L) -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC2 use. - */ -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ -#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ -#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PC_ENET_TENA ((ushort)0x0002) /* PC 14 */ -#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ -#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ - -/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to - * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. - */ -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002600) -#endif /* CONFIG_FPS850L, CONFIG_FPS860L */ - /*** IP860 **********************************************************/ #if defined(CONFIG_IP860) @@ -708,32 +683,6 @@ typedef struct scc_enet { #endif /* CONFIG_NETVIA */ -/*** SM850 *********************************************************/ - -/* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */ - -#ifdef CONFIG_SM850 -#define PROFF_ENET PROFF_SCC3 /* Ethernet on SCC3 */ -#define CPM_CR_ENET CPM_CR_CH_SCC3 -#define SCC_ENET 2 -#define PB_ENET_RXD ((uint)0x00000004) /* PB 29 */ -#define PB_ENET_TXD ((uint)0x00000002) /* PB 30 */ -#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PC_ENET_LBK ((ushort)0x0008) /* PC 12 */ -#define PC_ENET_TENA ((ushort)0x0004) /* PC 13 */ - -#define PC_ENET_RENA ((ushort)0x0800) /* PC 4 */ -#define PC_ENET_CLSN ((ushort)0x0400) /* PC 5 */ - -/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to - * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero. - */ -#define SICR_ENET_MASK ((uint)0x00FF0000) -#define SICR_ENET_CLKRT ((uint)0x00260000) -#endif /* CONFIG_SM850 */ - /*** SPD823TS ******************************************************/ #ifdef CONFIG_SPD823TS @@ -770,16 +719,14 @@ typedef struct scc_enet { defined(CONFIG_RRVISION)|| defined(CONFIG_TQM823L) || \ defined(CONFIG_TQM823M) || defined(CONFIG_TQM850L) || \ defined(CONFIG_TQM850M) || defined(CONFIG_TQM885D) || \ - defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2) + defined(CONFIG_RRVISION) /* Bits in parallel I/O port registers that have to be set/cleared * to configure the pins for SCC2 use. */ #define PROFF_ENET PROFF_SCC2 #define CPM_CR_ENET CPM_CR_CH_SCC2 -#if (!defined(CONFIG_TK885D)) /* TK885D does not use SCC Ethernet */ #define SCC_ENET 1 -#endif #define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ #define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ #define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */ |