powerpc: mpc824x: remove MPC824X cpu support

All the MPC824X boards are still non-generic boards:
A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Josef Wagner <Wagner@Microsys.de>
Cc: Torsten Demke <torsten.demke@fci.com>
Cc: Jim Thompson <jim@musenki.com>
Cc: Greg Allen <gallen@arlut.utexas.edu>

1 files changed, 0 insertions, 325 deletions

diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
deleted file mode 100644
index aa2d9c02de2..00000000000
--- a/include/configs/MVBLUE.h
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define MV_VERSION	"v0.2.0"
-
-/* LED0 = Power , LED1 = Error , LED2-5 = error code, LED6-7=00 -->PPCBoot error */
-#define ERR_NONE		0
-#define ERR_ENV			1
-#define ERR_BOOTM_BADMAGIC	2
-#define ERR_BOOTM_BADCRC	3
-#define ERR_BOOTM_GUNZIP	4
-#define ERR_BOOTP_TIMEOUT	5
-#define ERR_DHCP		6
-#define ERR_TFTP		7
-#define ERR_NOLAN		8
-#define ERR_LANDRV		9
-
-#define CONFIG_BOARD_TYPES	1
-#define MVBLUE_BOARD_BOX	1
-#define MVBLUE_BOARD_LYNX	2
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-#define CONFIG_SYS_LDSCRIPT	"board/mvblue/u-boot.lds"
-
-#if 0
-#define ERR_LED(code)	do { if (code) \
-		*(volatile char *)(0xff000003) = ( 3 | (code<<4) ) & 0xf3; \
-	else \
-		*(volatile char *)(0xff000003) = ( 1 ); \
-} while(0)
-#else
-#define ERR_LED(code)
-#endif
-
-#define CONFIG_MPC8245		1
-#define CONFIG_MVBLUE		1
-
-#define CONFIG_CLOCKS_IN_MHZ	1
-
-#define CONFIG_BOARD_TYPES	1
-
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOT_RETRY_TIME	-1
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"autoboot in %d seconds (stop with 's')...\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR	"s"
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_RESET_TO_RETRY		60
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_RUN
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_NISDOMAIN
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_NTPSERVER
-#define CONFIG_BOOTP_TIMEOFFSET
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16		/* Max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address			*/
-
-#define CONFIG_BOOTCOMMAND	"run nfsboot"
-#define CONFIG_BOOTARGS			"root=/dev/mtdblock5 ro rootfstype=jffs2"
-
-#define CONFIG_NFSBOOTCOMMAND	"bootp; run nfsargs addcons;bootm"
-
-#define CONFIG_EXTRA_ENV_SETTINGS			\
-	"console_nr=0\0"				\
-    "dhcp_client_id=mvBOX-XP\0"				\
-    "dhcp_vendor-class-identifier=mvBOX\0"		\
-    "adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0"	\
-    "flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0"	\
-    "safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0"	\
-    "hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0"	\
-	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-			"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0"	\
-	"addcons=setenv bootargs ${bootargs} console=ttyS${console_nr},${baudrate}N8\0" \
-    "mv_version=" MV_VERSION "\0"	\
-	"bootretry=30\0"
-
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW
-
-#define CONFIG_NET_RETRY_COUNT		5
-
-#define CONFIG_TULIP
-#define CONFIG_TULIP_FIX_DAVICOM	1
-#define CONFIG_ETHADDR			b6:b4:45:eb:fb:c0
-
-#define CONFIG_HW_WATCHDOG
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE	    0x00000000
-
-#define CONFIG_SYS_FLASH_BASE      0xFFF00000
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
-#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
-
-#define CONFIG_SYS_MONITOR_LEN     0x00100000
-#define CONFIG_SYS_MALLOC_LEN      (512 << 10) /* Reserve some kB for malloc()  */
-
-#define CONFIG_SYS_MEMTEST_START   0x00100000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END	    0x00800000	/* 1M ... 8M in DRAM		*/
-
-/* Maximum amount of RAM.  */
-#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000	/* 0 .. 256MB of (S)DRAM */
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_ISA_IO      0xFE000000
-
-/*
- * serial configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-
-#define CONFIG_SYS_NS16550_CLK     get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1    (CONFIG_SYS_EUMB_ADDR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2    (CONFIG_SYS_EUMB_ADDR + 0x4600)
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE      0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET   (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ  33000000
-
-/* Bit-field values for MCCR1.  */
-#define CONFIG_SYS_ROMNAL      7
-#define CONFIG_SYS_ROMFAL      11
-
-/* Bit-field values for MCCR2.  */
-#define CONFIG_SYS_TSWAIT      0x5
-#define CONFIG_SYS_REFINT      430
-
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.  */
-#define CONFIG_SYS_BSTOPRE     121
-
-/* Bit-field values for MCCR3.  */
-#define CONFIG_SYS_REFREC      8
-
-/* Bit-field values for MCCR4.  */
-#define CONFIG_SYS_PRETOACT    3
-#define CONFIG_SYS_ACTTOPRE    5
-#define CONFIG_SYS_ACTORW      3
-#define CONFIG_SYS_SDMODE_CAS_LAT  3
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM      1
-#define CONFIG_SYS_REGDIMM     0
-#define CONFIG_SYS_DBUS_SIZE2  1
-#define CONFIG_SYS_SDMODE_WRAP 0
-
-#define CONFIG_SYS_PGMAX       0x32
-#define CONFIG_SYS_SDRAM_DSCD  0x20
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START	    0x00000000
-#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE    1
-#define CONFIG_SYS_BANK1_START     0x3ff00000
-#define CONFIG_SYS_BANK1_END       0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE    0
-#define CONFIG_SYS_BANK2_START     0x3ff00000
-#define CONFIG_SYS_BANK2_END       0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE    0
-#define CONFIG_SYS_BANK3_START     0x3ff00000
-#define CONFIG_SYS_BANK3_END       0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE    0
-#define CONFIG_SYS_BANK4_START     0x3ff00000
-#define CONFIG_SYS_BANK4_END       0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE    0
-#define CONFIG_SYS_BANK5_START     0x3ff00000
-#define CONFIG_SYS_BANK5_END       0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE    0
-#define CONFIG_SYS_BANK6_START     0x3ff00000
-#define CONFIG_SYS_BANK6_END       0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE    0
-#define CONFIG_SYS_BANK7_START     0x3ff00000
-#define CONFIG_SYS_BANK7_END       0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE    0
-
-#define CONFIG_SYS_ODCR	    0xff
-
-#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#undef  CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS		1	/* Max number of flash banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT		63	/* Max number of sectors per flash	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	12000
-#define CONFIG_SYS_FLASH_WRITE_TOUT	1000
-
-
-#define CONFIG_ENV_IS_IN_FLASH
-
-#define CONFIG_ENV_OFFSET		0x00010000
-#define CONFIG_ENV_SIZE		0x00010000
-#define CONFIG_ENV_SECT_SIZE	0x00010000
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-#endif	/* __CONFIG_H */