diff options
| author | wdenk <wdenk> | 2003-05-18 11:30:09 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2003-05-18 11:30:09 +0000 |
| commit | 66fd3d1ce732d9168d6a056986231ada8dfa500e (patch) | |
| tree | 4b0d3f9094ef6525c631baf01268d21317496e81 /include/configs/atc.h | |
| parent | 45219c46605f9b933ab454738ee4ce543d5b70d6 (diff) | |
Add support for CompactFlash on ATC board
(includes support for Intel 82365 and compatible PC Card controllers,
and Yenta-compatible PCI-to-CardBus controllers)
Diffstat (limited to 'include/configs/atc.h')
| -rw-r--r-- | include/configs/atc.h | 49 |
1 files changed, 48 insertions, 1 deletions
diff --git a/include/configs/atc.h b/include/configs/atc.h index 0651ede3270..4f308471a92 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -125,7 +125,12 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_EEPROM) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_EEPROM | \ + CFG_CMD_PCI | \ + CFG_CMD_PCMCIA | \ + CFG_CMD_IDE) +#define CONFIG_DOS_PARTITION /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -149,6 +154,8 @@ #define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ + #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } @@ -239,6 +246,9 @@ # define CFG_RAMBOOT #endif +#define CONFIG_PCI +#define CONFIG_PCI_PNP + #if 1 /* environment is in Flash */ #define CFG_ENV_IS_IN_FLASH 1 @@ -441,4 +451,41 @@ #define CFG_PSDMR CFG_PSDMR_8COL #endif /* CFG_RAMBOOT */ +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + * + */ +#define CONFIG_I82365 + +#define CFG_PCMCIA_MEM_ADDR 0x81000000 +#define CFG_PCMCIA_MEM_SIZE 0x1000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR 0xa0000000 + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET 0x100 + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET 0x100 + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x108 + #endif /* __CONFIG_H */ |