apalis_imx6.c: prepare Apalis GPIO pins to be GPIO

In order to use the gpio commandline feature of U-Boot the pins
one wants to control must be muxed to GPIO.
Do that for Apalis pins GPIO[1:8] and for WAKE1_MICO.

This feature can be used as follows:
e.g. set GPIO1 to 1:
Apalis iMX6 # gpio set 36
gpio: pin 36 (gpio 36) value is 1

e.g. read the state of GPIO8:
Apalis iMX6 # gpio input 6
gpio: pin 6 (gpio 6) value is 1

0 files changed, 0 insertions, 0 deletions