Initial revision

1 files changed, 213 insertions, 0 deletions

diff --git a/include/configs/csb226.h b/include/configs/csb226.h
new file mode 100644
index 00000000000..13cf60f1673
--- /dev/null
+++ b/include/configs/csb226.h
@@ -0,0 +1,213 @@
+/*
+ * (C) Copyright 2000, 2001, 2002
+ * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
+ *
+ * Configuration for the Cogent CSB226 board. For details see
+ * http://www.cogcomp.com/csb_csb226.htm
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * include/configs/csb226.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start U-Boot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL		/* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_PXA250 		1	/* This is an PXA250 CPU            */
+#define CONFIG_CSB226		1	/* on a CSB226 board                */
+
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
+					/* for timer/console/ethernet       */
+/*
+ * Hardware drivers
+ */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_FFUART		1	/* we use FFUART on CSB226 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		19200
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL & ~CFG_CMD_NET)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	10
+#define CONFIG_BOOTARGS		"root=ramfs devfs=mount console=ttySA0,115200"
+#define CONFIG_ETHADDR		FF:FF:FF:FF:FF:FF
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.1.56
+#define CONFIG_SERVERIP		192.168.1.2
+#define CONFIG_BOOTCOMMAND	""
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+
+/*
+ * Size of malloc() pool; this lives below the uppermost 128 KiB which are
+ * used for the RAM copy of the uboot code
+ *
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+
+#define CFG_LONGHELP				/* undef to save memory         */
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt       */
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size      */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START	0xa0400000      /* memtest works on     */
+#define CFG_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
+
+#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR           0xa7fe0000      /* default load address */
+						/* RS: where is this documented? */
+						/* RS: is this where U-Boot is  */
+						/* RS: relocated to in RAM?      */
+
+#define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+						/* RS: the oscillator is actually 3680130?? */
+#define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
+						/* 0101000001 */
+						/*      ^^^^^ Memory Speed 99.53 MHz         */
+						/*    ^^      Run Mode Speed = 2x Mem Speed  */
+						/* ^^         Turbo Mode Sp. = 1x Run M. Sp. */
+
+#define CFG_MONITOR_LEN		0x20000		/* 128 KiB */
+
+                                                /* valid baudrates */
+#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+#ifdef  CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM   */
+#define PHYS_SDRAM_1		0xa0000000	/* SDRAM Bank #1            */
+#define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB                    */
+
+#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1            */
+#define PHYS_FLASH_SIZE		0x02000000	/* 32 MB                    */
+
+#define CFG_DRAM_BASE		0xa0000000	/* RAM starts here          */
+#define CFG_DRAM_SIZE		0x02000000
+
+#define CFG_FLASH_BASE          PHYS_FLASH_1
+
+/*
+ * GPIO settings
+ */
+#define CFG_GPSR0_VAL       0xFFFFFFFF
+#define CFG_GPSR1_VAL       0xFFFFFFFF
+#define CFG_GPSR2_VAL       0xFFFFFFFF
+#define CFG_GPCR0_VAL       0x08022080
+#define CFG_GPCR1_VAL       0x00000000
+#define CFG_GPCR2_VAL       0x00000000
+#define CFG_GPDR0_VAL       0xCD82A858
+#define CFG_GPDR1_VAL       0xFCFFAB80
+#define CFG_GPDR2_VAL       0x0001FFFF
+#define CFG_GAFR0_L_VAL     0x80000000
+#define CFG_GAFR0_U_VAL     0xA5254010
+#define CFG_GAFR1_L_VAL     0x599A9550
+#define CFG_GAFR1_U_VAL     0xAAA5AAAA
+#define CFG_GAFR2_L_VAL     0xAAAAAAAA
+#define CFG_GAFR2_U_VAL     0x00000002
+
+/* FIXME: set GPIO_RER/FER */
+
+#define CFG_PSSR_VAL        0x20
+
+/*
+ * Memory settings
+ */
+#define CFG_MSC0_VAL        0x2EF025D0
+#define CFG_MSC1_VAL        0x00003F64
+#define CFG_MSC2_VAL        0x00000000
+#define CFG_MDCNFG_VAL      0x09a909a9
+#define CFG_MDREFR_VAL      0x03ca0030
+/* #define CFG_MDREFR_VAL_100  ??? */
+#define CFG_MDMRS_VAL       0x00220022
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CFG_MECR_VAL        0x00000000
+#define CFG_MCMEM0_VAL      0x00000000
+#define CFG_MCMEM1_VAL      0x00000000
+#define CFG_MCATT0_VAL      0x00000000
+#define CFG_MCATT1_VAL      0x00000000
+#define CFG_MCIO0_VAL       0x00000000
+#define CFG_MCIO1_VAL       0x00000000
+
+/*
+#define _LED        0x08000010
+#define LED_BLANK  (0x08000040)
+*/
+
+/*
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS     1	/* max number of memory banks       */
+#define CFG_MAX_FLASH_SECT	128	/* max number of sect. on one chip  */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase       */
+#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write       */
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)
+					/* Addr of Environment Sector       */
+#define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector */
+
+#endif  /* __CONFIG_H */