TI OMAP3 SDP3430: Initial Support

Start of support of
Texas Instruments Software Development Platform(SDP)
for OMAP3430 - SDP3430

Highlights of this platform are:
Flash Memory devices:
	Sibley NOR, Micron 8bit NAND and OneNAND
Connectivity:
	3 UARTs and expanded 4 UART ports + IrDA
	Ethernet, USB
Other peripherals:
	TWL5030 PMIC+Audio+Keypad
	VGA display
Expansion ports:
	Memory devices plugin boards (PISMO)
	Connectivity board for GPS,WLAN etc.
Completely configurable boot sequence and device mapping
etc.

Support default jumpering and:
 - UART1/ttyS0 console(legacy sdp3430 u-boot)
 - UART3/ttyS2 console (matching other boards,
		 and SDP HW docs)
 - Ethernet
 - mmc0
 - NOR boot

Currently the UART1 is enabled by default.  for
compatibility with other OMAP3 u-boot platforms,
enable the #define of CONSOLE_J9.

Conflicts:

	Makefile

Fixed the conflict with smdkc100_config by moving omap_sdp3430_config
to it is alphabetically sorted location above zoom1.

Signed-off-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>

1 files changed, 369 insertions, 0 deletions

diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
new file mode 100644
index 00000000000..229dc5e6441
--- /dev/null
+++ b/include/configs/omap3_sdp3430.h
@@ -0,0 +1,369 @@
+/*
+ * (C) Copyright 2006-2009
+ * Texas Instruments Incorporated.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ * Nishanth Menon <nm@ti.com>
+ *
+ * Configuration settings for the 3430 TI SDP3430 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* TODO: REMOVE THE FOLLOWING
+ * Retained the following till size.h is removed in u-boot
+ */
+#include <asm/sizes.h>
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP34XX		1	/* which is a 34XX */
+#define CONFIG_OMAP3430		1	/* which is in a 3430 */
+#define CONFIG_OMAP3_3430SDP	1	/* working with SDP Rev2 */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * NOTE:  these #defines presume standard SDP jumper settings.
+ * In particular:
+ *  - 26 MHz clock (not 19.2 or 38.4 MHz)
+ *  - Boot from 128MB NOR, not NAND or OneNAND
+ *
+ * At this writing, OMAP3 U-Boot support doesn't permit concurrent
+ * support for all the flash types the board supports.
+ */
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ			/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+/*
+ * Size of malloc() pool
+ * Total Size Environment - 256k
+ * Malloc - add 256k
+ */
+#define CONFIG_ENV_SIZE			(256 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (256 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
+						/* initial data */
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER		1
+
+/*
+ * serial port - NS16550 compatible
+ */
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+
+/* Original SDP u-boot used UART1 and thus J8 (innermost); that can be
+ * swapped with UART2 via jumpering.  Downsides of using J8:  it doesn't
+ * support UART boot (that's only for UART3); it prevents sharing a Linux
+ * kernel (LL_DEBUG_UART3) or filesystem (getty ttyS2) with most boards.
+ *
+ * UART boot uses UART3 on J9, and the SDP user's guide says to use
+ * that for console.  Downsides of using J9:  you can't use IRDA too;
+ * since UART3 isn't in the CORE power domain, it may be a bit less
+ * usable in certain PM-sensitive debug scenarios.
+ */
+#undef CONSOLE_J9			/* else J8/UART1 (innermost) */
+
+#ifdef CONSOLE_J9
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3	/* UART3 */
+#else
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
+#define CONFIG_SERIAL1			1	/* UART1 */
+#endif
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
+					115200}
+
+/*
+ * I2C for power management setup
+ */
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+
+/* OMITTED:  single 1 Gbit MT29F1G NAND flash */
+
+/*
+ * NOR boot support - single 1 Gbit PF48F6000M0 Strataflash
+ */
+#define CONFIG_SYS_FLASH_BASE		0x10000000
+#define CONFIG_FLASH_CFI_DRIVER		1	/* Use drivers/cfi_flash.c */
+#define CONFIG_SYS_FLASH_CFI		1	/* use CFI geometry data */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* ~10x faster writes */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware sector protection */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	1	/* flinfo 'E' for empty */
+#define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_MAX_FLASH_BANKS      1	/* max number of flash banks */
+
+#define CONFIG_SYS_FLASH_CFI_WIDTH	2
+#define PHYS_FLASH_SIZE			(128 << 20)
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max sectors on one chip */
+
+/* timeout values are in milliseconds */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
+
+/* OMITTED:  single 2 Gbit KFM2G16 OneNAND flash */
+
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_SYS_ENV_SECT_SIZE	(256 << 10)
+#define CONFIG_ENV_OFFSET		CONFIG_SYS_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE)
+/*--------------------------------------------------------------------------*/
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+/* Enabled commands */
+#define CONFIG_CMD_DHCP		/* DHCP Support			*/
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
+#define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_NET
+
+/* Disabled commands */
+#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#undef CONFIG_CMD_IMLS		/* List all found images	*/
+
+/*--------------------------------------------------------------------------*/
+/*
+ * MMC boot support
+ */
+
+#if defined(CONFIG_CMD_MMC)
+#define CONFIG_MMC			1
+#define CONFIG_OMAP3_MMC		1
+#define CONFIG_DOS_PARTITION		1
+#endif
+
+/*----------------------------------------------------------------------------
+ * SMSC9115 Ethernet from SMSC9118 family
+ *----------------------------------------------------------------------------
+ */
+#if defined(CONFIG_CMD_NET)
+
+#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96_BASE	DEBUG_BASE
+#define CONFIG_LAN91C96_EXT_PHY
+
+#define CONFIG_BOOTP_SEND_HOSTNAME
+/*
+ * BOOTP fields
+ */
+#define CONFIG_BOOTP_SUBNETMASK		0x00000001
+#define CONFIG_BOOTP_GATEWAY		0x00000002
+#define CONFIG_BOOTP_HOSTNAME		0x00000004
+#define CONFIG_BOOTP_BOOTPATH		0x00000010
+#endif /* (CONFIG_CMD_NET) */
+
+/*
+ * Environment setup
+ *
+ * Default boot order:  mmc bootscript, MMC uImage, NOR image.
+ * Network booting environment must be configured at site.
+ */
+
+/* allow overwriting serial config and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x82000000\0" \
+	"console=ttyS0,115200n8\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"root=/dev/mmcblk0p2 rw " \
+		"rootfstype=ext3 rootwait\0" \
+	"norargs=setenv bootargs console=${console} " \
+		"root=/dev/mtdblock3 rw " \
+		"rootfstype=jffs2\0" \
+	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from MMC/SD ...; " \
+		"autoscr ${loadaddr}\0" \
+	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+	"mmcboot=echo Booting from MMC/SD ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
+	"norboot=echo Booting from NOR ...; " \
+		"run norargs; " \
+		"bootm 0x80000\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"if mmcinit; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else run norboot; " \
+			"fi; " \
+		"fi; " \
+	"else run norboot; fi"
+
+#define CONFIG_AUTO_COMPLETE		1
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT			"OMAP34XX SDP # "
+
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		V_PROMPT
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+/* SDRAM Test range - start at 16 meg boundary -ends at 32Meg -
+ * a basic sanity check ONLY
+ * IF you would like to increase coverage, increase the end address
+ * or run the test with custom options
+ */
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0 + 0x01000000)
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + (32 << 20))
+
+/* Default load address */
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * 3430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
+ * 32KHz clk, or from external sig. This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10) /* Regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4 << 10) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10) /* FIQ stack */
+#endif
+
+/*
+ * SDRAM Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE	(32 << 20) /* at least 32 meg */
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C		1
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * NOR FLASH usage ... default nCS0:
+ *  - one 256KB sector for U-Boot
+ *  - one 256KB sector for its parameters (not all used)
+ *  - eight sectors (2 MB) for kernel
+ *  - rest for JFFS2
+ */
+
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+
+#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
+
+/*
+ * NAND FLASH usage ... default nCS1:
+ *  - four 128KB sectors for X-Loader
+ *  - four 128KB sectors for U-Boot
+ *  - two 128KB sector for its parameters
+ *  - 32 sectors (4 MB) for kernel
+ *  - rest for filesystem
+ */
+
+/*
+ * OneNAND FLASH usage ... default nCS2:
+ *  - four 128KB sectors for X-Loader
+ *  - two 128KB sectors for U-Boot
+ *  - one 128KB sector for its parameters
+ *  - sixteen sectors (2 MB) for kernel
+ *  - rest for filesystem
+ */
+
+/*--------------------------------------------------------------------------*/
+
+#ifndef __ASSEMBLY__
+extern struct gpmc *gpmc_cfg;
+extern unsigned int boot_flash_base;
+extern volatile unsigned int boot_flash_env_addr;
+extern unsigned int boot_flash_off;
+extern unsigned int boot_flash_sec;
+extern unsigned int boot_flash_type;
+#endif
+
+#endif				/* __CONFIG_H */