rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 128 insertions, 128 deletions

diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index e96adb949cc..26ed55795e2 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -73,7 +73,7 @@
  * 0x6	     0x1	 66	133    266   Close  Close  Open
  * 0x6	     0x2	 66	133    300   Close  Open   Close
  */
-#define CFG_SBC_MODCK_H 0x05
+#define CONFIG_SYS_SBC_MODCK_H 0x05
 
 /* Define this if you want to boot from 0x00000100. If you don't define
  * this, you will need to program the bootloader to 0xfff00000, and
@@ -81,34 +81,34 @@
  * way to do that is to program the bootloader at both addresses.
  * It is suggested that you just let U-Boot live at 0x00000000.
  */
-#define CFG_SBC_BOOT_LOW 1
+#define CONFIG_SYS_SBC_BOOT_LOW 1
 
 /* What should the base address of the main FLASH be and how big is
  * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  * this to be the SIMM.
  */
-#define CFG_FLASH0_BASE 0x40000000
-#define CFG_FLASH0_SIZE 4
+#define CONFIG_SYS_FLASH0_BASE 0x40000000
+#define CONFIG_SYS_FLASH0_SIZE 4
 
 /* What should the base address of the secondary FLASH be and how big
  * is it (in Mbytes)? The secondary FLASH is whichever is connected
  * to *CS6. U-Boot expects this to be the on board FLASH. If you don't
  * want it enabled, don't define these constants.
  */
-#define CFG_FLASH1_BASE 0x60000000
-#define CFG_FLASH1_SIZE 2
+#define CONFIG_SYS_FLASH1_BASE 0x60000000
+#define CONFIG_SYS_FLASH1_SIZE 2
 
 /* What should be the base address of SDRAM DIMM and how big is
  * it (in Mbytes)?
 */
-#define CFG_SDRAM0_BASE 0x00000000
-#define CFG_SDRAM0_SIZE 64
+#define CONFIG_SYS_SDRAM0_BASE 0x00000000
+#define CONFIG_SYS_SDRAM0_SIZE 64
 
 /* What should be the base address of the LEDs and switch S0?
  * If you don't want them enabled, don't define this.
  */
-#define CFG_LED_BASE 0xa0000000
+#define CONFIG_SYS_LED_BASE 0xa0000000
 
 
 /*
@@ -128,10 +128,10 @@
  *     0x00F5 FFB0     Board Info Data
  *     0x00F6 0000     Malloc Arena
  *	     :		    CONFIG_ENV_SECT_SIZE, 256k
- *	     :		    CFG_MALLOC_LEN,    128k
+ *	     :		    CONFIG_SYS_MALLOC_LEN,    128k
  *     0x00FC 0000     RAM Copy of Monitor Code
- *	     :		    CFG_MONITOR_LEN,   256k
- *     0x00FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ *	     :		    CONFIG_SYS_MONITOR_LEN,   256k
+ *     0x00FF FFFF     [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
  */
 
 /*
@@ -151,10 +151,10 @@
  *     0x03F5 FFB0     Board Info Data
  *     0x03F6 0000     Malloc Arena
  *	     :		    CONFIG_ENV_SECT_SIZE, 256k
- *	     :		    CFG_MALLOC_LEN,    128k
+ *	     :		    CONFIG_SYS_MALLOC_LEN,    128k
  *     0x03FC 0000     RAM Copy of Monitor Code
- *	     :		    CFG_MONITOR_LEN,   256k
- *     0x03FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ *	     :		    CONFIG_SYS_MONITOR_LEN,   256k
+ *     0x03FF FFFF     [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1
  */
 
 
@@ -220,7 +220,7 @@
  *  - RX clk is CLK11
  *  - TX clk is CLK12
  */
-# define CFG_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
+# define CONFIG_SYS_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 
@@ -230,10 +230,10 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE	0
-# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CPMFCR_RAMTYPE	0
+# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
 #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
 
@@ -251,8 +251,8 @@
  */
 #undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * Software (bit-bang) I2C driver configuration
@@ -425,14 +425,14 @@
 
 
 /* undef this to save memory */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt */
-#define CFG_PROMPT		"=> "
+#define CONFIG_SYS_PROMPT		"=> "
 
-#undef  CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#undef  CONFIG_SYS_HUSH_PARSER
+#ifdef  CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 /* When CONFIG_TIMESTAMP is selected, the timestamp (date and time)
@@ -469,7 +469,7 @@
 #undef CONFIG_WATCHDOG				/* disable the watchdog */
 
 /* Where do the internal registers live? */
-#define CFG_IMMR		0xF0000000
+#define CONFIG_SYS_IMMR		0xF0000000
 
 /*****************************************************************************
  *
@@ -486,37 +486,37 @@
  * Miscellaneous configurable options
  */
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CBSIZE		1024	/* Console I/O Buffer Size	     */
+#  define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	     */
 #else
-#  define CFG_CBSIZE		256	/* Console I/O Buffer Size	     */
+#  define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	     */
 #endif
 
 /* Print Buffer Size */
-#define CFG_PBSIZE	  (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE	  (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
 
-#define CFG_MAXARGS		32	/* max number of command args	*/
+#define CONFIG_SYS_MAXARGS		32	/* max number of command args	*/
 
-#define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	   */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	   */
 
-#define CFG_LOAD_ADDR		0x400000   /* default load address */
-#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_LOAD_ADDR		0x400000   /* default load address */
+#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CFG_ALT_MEMTEST			/* Select full-featured memory test */
-#define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
+#define CONFIG_SYS_ALT_MEMTEST			/* Select full-featured memory test */
+#define CONFIG_SYS_MEMTEST_START	0x2000	/* memtest works from the end of */
 					/* the exception vector table */
 					/* to the end of the DRAM  */
 					/* less monitor and malloc area */
-#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
-#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
-				+ CFG_MALLOC_LEN \
+#define CONFIG_SYS_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
+#define CONFIG_SYS_MEM_END_USAGE	( CONFIG_SYS_MONITOR_LEN \
+				+ CONFIG_SYS_MALLOC_LEN \
 				+ CONFIG_ENV_SECT_SIZE \
-				+ CFG_STACK_USAGE )
+				+ CONFIG_SYS_STACK_USAGE )
 
-#define CFG_MEMTEST_END		( CFG_SDRAM_SIZE * 1024 * 1024 \
-				- CFG_MEM_END_USAGE )
+#define CONFIG_SYS_MEMTEST_END		( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
+				- CONFIG_SYS_MEM_END_USAGE )
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -524,109 +524,109 @@
  * You should know what you are doing if you make changes here.
  */
 
-#define CFG_FLASH_BASE	CFG_FLASH0_BASE
-#define CFG_FLASH_SIZE	CFG_FLASH0_SIZE
-#define CFG_SDRAM_BASE	CFG_SDRAM0_BASE
-#define CFG_SDRAM_SIZE	CFG_SDRAM0_SIZE
+#define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_FLASH0_BASE
+#define CONFIG_SYS_FLASH_SIZE	CONFIG_SYS_FLASH0_SIZE
+#define CONFIG_SYS_SDRAM_BASE	CONFIG_SYS_SDRAM0_BASE
+#define CONFIG_SYS_SDRAM_SIZE	CONFIG_SYS_SDRAM0_SIZE
 
 /*-----------------------------------------------------------------------
  * Hard Reset Configuration Words
  */
-#if defined(CFG_SBC_BOOT_LOW)
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#if defined(CONFIG_SYS_SBC_BOOT_LOW)
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
 #else
-#  define  CFG_SBC_HRCW_BOOT_FLAGS  (0)
-#endif /* defined(CFG_SBC_BOOT_LOW) */
+#  define  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CONFIG_SYS_SBC_BOOT_LOW) */
 
-/* get the HRCW ISB field from CFG_IMMR */
-#define CFG_SBC_HRCW_IMMR	( ((CFG_IMMR & 0x10000000) >> 10) | \
-				  ((CFG_IMMR & 0x01000000) >>  7) | \
-				  ((CFG_IMMR & 0x00100000) >>  4) )
+/* get the HRCW ISB field from CONFIG_SYS_IMMR */
+#define CONFIG_SYS_SBC_HRCW_IMMR	( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) | \
+				  ((CONFIG_SYS_IMMR & 0x01000000) >>  7) | \
+				  ((CONFIG_SYS_IMMR & 0x00100000) >>  4) )
 
-#define CFG_HRCW_MASTER		( HRCW_BPS11				| \
+#define CONFIG_SYS_HRCW_MASTER		( HRCW_BPS11				| \
 				  HRCW_DPPC11				| \
-				  CFG_SBC_HRCW_IMMR			| \
+				  CONFIG_SYS_SBC_HRCW_IMMR			| \
 				  HRCW_MMR00				| \
 				  HRCW_LBPC11				| \
 				  HRCW_APPC10				| \
 				  HRCW_CS10PC00				| \
-				  (CFG_SBC_MODCK_H & HRCW_MODCK_H1111)	| \
-				  CFG_SBC_HRCW_BOOT_FLAGS )
+				  (CONFIG_SYS_SBC_MODCK_H & HRCW_MODCK_H1111)	| \
+				  CONFIG_SYS_SBC_HRCW_BOOT_FLAGS )
 
 /* no slaves */
-#define CFG_HRCW_SLAVE1		0
-#define CFG_HRCW_SLAVE2		0
-#define CFG_HRCW_SLAVE3		0
-#define CFG_HRCW_SLAVE4		0
-#define CFG_HRCW_SLAVE5		0
-#define CFG_HRCW_SLAVE6		0
-#define CFG_HRCW_SLAVE7		0
+#define CONFIG_SYS_HRCW_SLAVE1		0
+#define CONFIG_SYS_HRCW_SLAVE2		0
+#define CONFIG_SYS_HRCW_SLAVE3		0
+#define CONFIG_SYS_HRCW_SLAVE4		0
+#define CONFIG_SYS_HRCW_SLAVE5		0
+#define CONFIG_SYS_HRCW_SLAVE6		0
+#define CONFIG_SYS_HRCW_SLAVE7		0
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent.
  */
-#define CFG_MONITOR_BASE	CFG_FLASH0_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH0_BASE
 
-#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
-#  define CFG_RAMBOOT
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#  define CONFIG_SYS_RAMBOOT
 #endif
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms)	*/
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 #  define CONFIG_ENV_IS_IN_FLASH	1
 
 #  ifdef CONFIG_ENV_IN_OWN_SECT
-#    define CONFIG_ENV_ADDR	(CFG_MONITOR_BASE + 0x40000)
+#    define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE + 0x40000)
 #    define CONFIG_ENV_SECT_SIZE	0x40000
 #  else
-#    define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CONFIG_ENV_SECT_SIZE)
+#    define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SECT_SIZE)
 #    define CONFIG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
 #    define CONFIG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size	*/
 #  endif /* CONFIG_ENV_IN_OWN_SECT */
 
 #else
 #  define CONFIG_ENV_IS_IN_NVRAM	1
-#  define CONFIG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 #  define CONFIG_ENV_SIZE		0x200
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 
 #if defined(CONFIG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
 /*-----------------------------------------------------------------------
@@ -639,37 +639,37 @@
  *
  * HID1 has only read-only information - nothing to set.
  */
-#define CFG_HID0_INIT	(HID0_ICE  |\
+#define CONFIG_SYS_HID0_INIT	(HID0_ICE  |\
 			 HID0_DCE  |\
 			 HID0_ICFI |\
 			 HID0_DCI  |\
 			 HID0_IFEM |\
 			 HID0_ABE)
 
-#define CFG_HID0_FINAL	(HID0_ICE  |\
+#define CONFIG_SYS_HID0_FINAL	(HID0_ICE  |\
 			 HID0_IFEM |\
 			 HID0_ABE  |\
 			 HID0_EMCP)
-#define CFG_HID2	0
+#define CONFIG_SYS_HID2	0
 
 /*-----------------------------------------------------------------------
  * RMR - Reset Mode Register
  *-----------------------------------------------------------------------
  */
-#define CFG_RMR		0
+#define CONFIG_SYS_RMR		0
 
 /*-----------------------------------------------------------------------
  * BCR - Bus Configuration					 4-25
  *-----------------------------------------------------------------------
  */
-#define CFG_BCR		(BCR_ETM)
+#define CONFIG_SYS_BCR		(BCR_ETM)
 
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				 4-31
  *-----------------------------------------------------------------------
  */
 
-#define CFG_SIUMCR	(SIUMCR_DPPC11	|\
+#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC11	|\
 			 SIUMCR_L2CPC00 |\
 			 SIUMCR_APPC10	|\
 			 SIUMCR_MMR00)
@@ -682,7 +682,7 @@
  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
  */
 #if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC |\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC |\
 			 SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_LBME |\
@@ -690,7 +690,7 @@
 			 SYPCR_SWP  |\
 			 SYPCR_SWE)
 #else
-#define CFG_SYPCR	(SYPCR_SWTC |\
+#define CONFIG_SYS_SYPCR	(SYPCR_SWTC |\
 			 SYPCR_BMT  |\
 			 SYPCR_PBME |\
 			 SYPCR_LBME |\
@@ -704,7 +704,7 @@
  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
  * and enable Time Counter
  */
-#define CFG_TMCNTSC	(TMCNTSC_SEC |\
+#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC |\
 			 TMCNTSC_ALR |\
 			 TMCNTSC_TCF |\
 			 TMCNTSC_TCE)
@@ -715,7 +715,7 @@
  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
  * Periodic timer
  */
-#define CFG_PISCR	(PISCR_PS  |\
+#define CONFIG_SYS_PISCR	(PISCR_PS  |\
 			 PISCR_PTF |\
 			 PISCR_PTE)
 
@@ -723,13 +723,13 @@
  * SCCR - System Clock Control					 9-8
  *-----------------------------------------------------------------------
  */
-#define CFG_SCCR	0
+#define CONFIG_SYS_SCCR	0
 
 /*-----------------------------------------------------------------------
  * RCCR - RISC Controller Configuration				13-7
  *-----------------------------------------------------------------------
  */
-#define CFG_RCCR	0
+#define CONFIG_SYS_RCCR	0
 
 /*
  * Initialize Memory Controller:
@@ -780,7 +780,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR0_PRELIM	((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_32			|\
 			 BRx_MS_GPCM_P			|\
 			 BRx_V)
@@ -799,7 +799,7 @@
  *     - One idle clock is inserted between a read access from the
  *	 current bank and the next access.
  */
-#define CFG_OR0_PRELIM	(MEG_TO_AM(CFG_FLASH0_SIZE)	|\
+#define CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE)	|\
 			 ORxG_CSNT			|\
 			 ORxG_ACS_DIV1			|\
 			 ORxG_SCY_5_CLK			|\
@@ -834,12 +834,12 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#define CFG_BR2_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR2_PRELIM	((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
 
-#define CFG_BR3_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+#define CONFIG_SYS_BR3_PRELIM	((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\
 			 BRx_PS_64			|\
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
@@ -853,8 +853,8 @@
  *     - Back-to-back page mode
  *     - Internal bank interleaving within save device enabled
  */
-#if (CFG_SDRAM0_SIZE == 16)
-#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
+#if (CONFIG_SYS_SDRAM0_SIZE == 16)
+#define CONFIG_SYS_OR2_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE)	|\
 			 ORxS_BPD_2			|\
 			 ORxS_ROWST_PBI0_A9		|\
 			 ORxS_NUMR_11)
@@ -869,8 +869,8 @@
  *     - Back-to-back page mode
  *     - Internal bank interleaving within save device enabled
  */
-#if (CFG_SDRAM0_SIZE == 64)
-#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
+#if (CONFIG_SYS_SDRAM0_SIZE == 64)
+#define CONFIG_SYS_OR2_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE)	|\
 			 ORxS_BPD_4			|\
 			 ORxS_ROWST_PBI0_A8		|\
 			 ORxS_NUMR_12)
@@ -886,7 +886,7 @@
  */
 #define SDRAM_SPD_ADDR 0x54
 
-#if (CFG_SDRAM0_SIZE == 16)
+#if (CONFIG_SYS_SDRAM0_SIZE == 16)
 /* With a 16 MB DIMM, the PSDMR is configured as follows:
  *
  *     - Bank Based Interleaving,
@@ -904,7 +904,7 @@
  *     - earliest timing for PRECHARGE after last data was written is 1 clock,
  *     - CAS Latency is 2.
  */
-#define CFG_PSDMR	(PSDMR_RFEN	      |\
+#define CONFIG_SYS_PSDMR	(PSDMR_RFEN	      |\
 			 PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A16_A18   |\
 			 PSDMR_SDA10_PBI0_A9  |\
@@ -916,7 +916,7 @@
 			 PSDMR_CL_2)
 #endif
 
-#if (CFG_SDRAM0_SIZE == 64)
+#if (CONFIG_SYS_SDRAM0_SIZE == 64)
 /* With a 64 MB DIMM, the PSDMR is configured as follows:
  *
  *     - Bank Based Interleaving,
@@ -934,7 +934,7 @@
  *     - earliest timing for PRECHARGE after last data was written is 1 clock,
  *     - CAS Latency is 2.
  */
-#define CFG_PSDMR	(PSDMR_RFEN	      |\
+#define CONFIG_SYS_PSDMR	(PSDMR_RFEN	      |\
 			 PSDMR_SDAM_A14_IS_A5 |\
 			 PSDMR_BSMA_A14_A16   |\
 			 PSDMR_SDA10_PBI0_A9  |\
@@ -950,14 +950,14 @@
  * Shoot for approximately 1MHz on the prescaler.
  */
 #if (CONFIG_8260_CLKIN == (66 * 1000 * 1000))
-#define CFG_MPTPR	MPTPR_PTP_DIV64
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV64
 #elif (CONFIG_8260_CLKIN == (33 * 1000 * 1000))
-#define CFG_MPTPR	MPTPR_PTP_DIV32
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV32
 #else
-#warning "Unconfigured bus clock freq: check CFG_MPTPR and CFG_PSRT are OK"
-#define CFG_MPTPR	MPTPR_PTP_DIV32
+#warning "Unconfigured bus clock freq: check CONFIG_SYS_MPTPR and CONFIG_SYS_PSRT are OK"
+#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV32
 #endif
-#define CFG_PSRT	14
+#define CONFIG_SYS_PSRT	14
 
 
 /* Bank 4 - On board SDRAM
@@ -978,7 +978,7 @@
  * This expects the on board FLASH SIMM to be connected to *CS6
  * It consists of 1 AM29F016A part.
  */
-#if (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE))
+#if (defined(CONFIG_SYS_FLASH1_BASE) && defined(CONFIG_SYS_FLASH1_SIZE))
 
 /* BR6 is configured as follows:
  *
@@ -992,7 +992,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#  define CFG_BR6_PRELIM  ((CFG_FLASH1_BASE & BRx_BA_MSK) |\
+#  define CONFIG_SYS_BR6_PRELIM  ((CONFIG_SYS_FLASH1_BASE & BRx_BA_MSK) |\
 			   BRx_PS_8			  |\
 			   BRx_MS_GPCM_P		  |\
 			   BRx_V)
@@ -1011,13 +1011,13 @@
  *     - One idle clock is inserted between a read access from the
  *	 current bank and the next access.
  */
-#  define CFG_OR6_PRELIM  (MEG_TO_AM(CFG_FLASH1_SIZE)  |\
+#  define CONFIG_SYS_OR6_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH1_SIZE)  |\
 			   ORxG_CSNT		       |\
 			   ORxG_ACS_DIV1	       |\
 			   ORxG_SCY_5_CLK	       |\
 			   ORxG_TRLX		       |\
 			   ORxG_EHTR)
-#endif /* (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE)) */
+#endif /* (defined(CONFIG_SYS_FLASH1_BASE) && defined(CONFIG_SYS_FLASH1_SIZE)) */
 
 /*-----------------------------------------------------------------------
  * BR7 - Base Register
@@ -1032,7 +1032,7 @@
  *  LEDs     are at 0x00001 (write only)
  *  switches are at 0x00001 (read only)
  */
-#ifdef CFG_LED_BASE
+#ifdef CONFIG_SYS_LED_BASE
 
 /* BR7 is configured as follows:
  *
@@ -1046,7 +1046,7 @@
  *     - No data pipelining is done
  *     - Valid
  */
-#  define CFG_BR7_PRELIM  ((CFG_LED_BASE & BRx_BA_MSK)	 |\
+#  define CONFIG_SYS_BR7_PRELIM  ((CONFIG_SYS_LED_BASE & BRx_BA_MSK)	 |\
 			   BRx_PS_8			 |\
 			   BRx_MS_GPCM_P		 |\
 			   BRx_V)
@@ -1065,13 +1065,13 @@
  *     - One idle clock is inserted between a read access from the
  *	 current bank and the next access.
  */
-#  define CFG_OR7_PRELIM  (ORxG_AM_MSK		       |\
+#  define CONFIG_SYS_OR7_PRELIM  (ORxG_AM_MSK		       |\
 			   ORxG_CSNT		       |\
 			   ORxG_ACS_DIV1	       |\
 			   ORxG_SCY_15_CLK	       |\
 			   ORxG_TRLX		       |\
 			   ORxG_EHTR)
-#endif /* CFG_LED_BASE */
+#endif /* CONFIG_SYS_LED_BASE */
 
 /*
  * Internal Definitions