tny_a9260/tny_a9g20: update board to the new AT91 organization

Cc: Albin Tonnerre <tonnerrealbin@gmail.com>
CC: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

1 files changed, 42 insertions, 43 deletions

diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index 7b18022c6e3..986aebaae44 100644
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -30,19 +30,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_AT91_LEGACY
-
-#if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9260_EEPROM)
-#define CONFIG_TNY_A9260
-#elif defined(CONFIG_TNY_A9G20_NANDFLASH) || defined(CONFIG_TNY_A9G20_EEPROM)
-#define CONFIG_TNY_A9G20
-#endif
-
-#ifdef CONFIG_TNY_A9260
-#define CONFIG_AT91SAM9260
-#else
-#define CONFIG_AT91SAM9G20
-#endif
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
 
 #if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9G20_NANDFLASH)
 #define CONFIG_ENV_IS_IN_NAND
@@ -50,29 +42,36 @@
 #define CONFIG_ENV_IS_IN_EEPROM
 #endif
 
+/* Define actual evaluation board type from used processor type */
+#ifdef CONFIG_AT91SAM9G20
+# define CONFIG_TNY_A9G20
+#else
+# define CONFIG_TNY_A9260
+#endif
+
 /* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
-#define CONFIG_SYS_HZ		1000
+#define CONFIG_SYS_HZ		        1000
 
-#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core */
 #define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	1
-
+#define CONFIG_CMDLINE_TAG	        /* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 /*
  * Hardware drivers
  */
-#define CONFIG_AT91_GPIO	1
-#define CONFIG_ATMEL_USART	1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3		1	/* USART 3 is DBGU */
+#define CONFIG_ATMEL_LEGACY
+#define CONFIG_AT91_GPIO
+
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
+#define	CONFIG_USART_ID			ATMEL_ID_SYS
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
 
 #define CONFIG_BOOTDELAY	3
 
@@ -86,13 +85,16 @@
 #undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_USB
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM			0x20000000
-#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE		0x04000000	/* 64 megs */
+# define CONFIG_SYS_INIT_SP_ADDR \
+	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
 
 /* SPI EEPROM */
 #define CONFIG_SPI
@@ -109,8 +111,8 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
-#define CONFIG_SYS_NAND_BASE			0x40000000
-#define CONFIG_SYS_NAND_DBW_8			1
+#define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_DBW_8
 /* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 /* our CLE is AD22 */
@@ -119,27 +121,27 @@
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
 
 /* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH			1
+#define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_DOS_PARTITION		1
-#define CONFIG_CMD_FAT			1
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END			0x23e00000
 
 /* Env in EEPROM, bootstrap + u-boot in NAND*/
 #ifdef CONFIG_ENV_IS_IN_EEPROM
 #define CONFIG_ENV_OFFSET		0x20
-#define CONFIG_ENV_SIZE		0x1000
+#define CONFIG_ENV_SIZE		        0x1000
 #endif
 
 /* Env, bootstrap and u-boot in NAND */
 #ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
-#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_OFFSET               0x60000
+#define CONFIG_ENV_OFFSET_REDUND        0x80000
+#define CONFIG_ENV_SIZE                 0x20000
 #endif
 
 #define CONFIG_BOOTCOMMAND	"nboot 0x21000000 0 400000"
@@ -149,15 +151,12 @@
 				"120M(rootfs),-(other) " \
 				"rw rootfstype=jffs2"
 
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
-
 #define CONFIG_SYS_PROMPT	"U-Boot> "
 #define CONFIG_SYS_CBSIZE	256
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP	1
-#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
 
 /*
  * Size of malloc() pool