* Patch by Markus Pietrek, 24 Feb 2004:

  NS9750 DevBoard added

* Patch by Pierre AUBERT, 24 Feb 2004
  add USB support for MPC5200

* Patch by Steven Scholz, 24 Feb 2004:
  - fix MII commands to use values from last command

* Patch by Torsten Demke, 24 Feb 2004:
  Add support for the eXalion platform (SPSW-8240, F-30, F-300)

1 files changed, 125 insertions, 0 deletions

diff --git a/include/ns9750_bbus.h b/include/ns9750_bbus.h
new file mode 100644
index 00000000000..0918931cb2c
--- /dev/null
+++ b/include/ns9750_bbus.h
@@ -0,0 +1,125 @@
+/***********************************************************************
+ *
+ * Copyright (C) 2004 by FS Forth-Systeme GmbH.
+ * All rights reserved.
+ *
+ * $Id: ns9750_bbus.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
+ * @Author: Markus Pietrek
+ * @Descr: Definitions for BBus usage
+ * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 10
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ ***********************************************************************/
+
+#ifndef FS_NS9750_BBUS_H
+#define FS_NS9750_BBUS_H
+
+#define NS9750_BBUS_MODULE_BASE		(0x90600000)
+
+#define get_bbus_reg_addr(c) \
+	((volatile unsigned int *)(NS9750_BBUS_MODULE_BASE+(unsigned int) (c)))
+
+/* We have support for 50 GPIO pins */
+
+#define get_gpio_cfg_reg_addr(pin) \
+	get_bbus_reg_addr( NS9750_BBUS_GPIO_CFG_BASE + (((pin) >> 3) * 4) )
+
+/* To Read/Modify/Write a pin configuration register, use it like
+   set_gpio_cfg_reg_val( 12, NS9750_GPIO_CFG_FUNC_GPIO|NS9750_GPIO_CFG_OUTPUT );
+   They should be wrapped by cli()/sti() */
+#define set_gpio_cfg_reg_val(pin,cfg) \
+	*get_gpio_cfg_reg_addr(pin)=(*get_gpio_cfg_reg_addr((pin)) & \
+				 	~NS9750_GPIO_CFG_MASK((pin))) |\
+				NS9750_GPIO_CFG_VAL((pin),(cfg));
+
+#define NS9750_GPIO_CFG_MASK(pin)	(NS9750_GPIO_CFG_VAL(pin, \
+					 NS9750_GPIO_CFG_MA))
+#define NS9750_GPIO_CFG_VAL(pin,cfg)	((cfg) << (((pin) % 8) * 4))
+
+#define NS9750_GPIO_CFG_MA		(0x0F)
+#define NS9750_GPIO_CFG_INPUT		(0x00)
+#define NS9750_GPIO_CFG_OUTPUT		(0x08)
+#define NS9750_GPIO_CFG_FUNC_GPIO	(0x03)
+#define NS9750_GPIO_CFG_FUNC_2		(0x02)
+#define NS9750_GPIO_CFG_FUNC_1		(0x01)
+#define NS9750_GPIO_CFG_FUNC_0		(0x00)
+
+/* the register addresses */
+
+#define NS9750_BBUS_MASTER_RESET	(0x00)
+#define NS9750_BBUS_GPIO_CFG_BASE	(0x10)
+#define NS9750_BBUS_GPIO_CTRL_BASE	(0x30)
+#define NS9750_BBUS_GPIO_STAT_BASE	(0x40)
+#define NS9750_BBUS_MONITOR		(0x50)
+#define NS9750_BBUS_DMA_INT_STAT	(0x60)
+#define NS9750_BBUS_DMA_INT_ENABLE	(0x64)
+#define NS9750_BBUS_USB_CFG		(0x70)
+#define NS9750_BBUS_ENDIAN_CFG		(0x80)
+#define NS9750_BBUS_ARM_WAKE_UP		(0x90)
+
+/* register bit fields */
+
+#define NS9750_BBUS_MASTER_RESET_UTIL	(0x00000100)
+#define NS9750_BBUS_MASTER_RESET_I2C	(0x00000080)
+#define NS9750_BBUS_MASTER_RESET_1284	(0x00000040)
+#define NS9750_BBUS_MASTER_RESET_SER4	(0x00000020)
+#define NS9750_BBUS_MASTER_RESET_SER3	(0x00000010)
+#define NS9750_BBUS_MASTER_RESET_SER2	(0x00000008)
+#define NS9750_BBUS_MASTER_RESET_SER1	(0x00000004)
+#define NS9750_BBUS_MASTER_RESET_USB	(0x00000002)
+#define NS9750_BBUS_MASTER_RESET_DMA	(0x00000001)
+
+/* BS9750_BBUS_DMA_INT_BINT* are valid for *DMA_INT_STAT and *DMA_INT_ENABLE */
+
+#define NS9750_BBUS_DMA_INT_BINT16	(0x00010000)
+#define NS9750_BBUS_DMA_INT_BINT15	(0x00008000)
+#define NS9750_BBUS_DMA_INT_BINT14	(0x00004000)
+#define NS9750_BBUS_DMA_INT_BINT13	(0x00002000)
+#define NS9750_BBUS_DMA_INT_BINT12	(0x00001000)
+#define NS9750_BBUS_DMA_INT_BINT11	(0x00000800)
+#define NS9750_BBUS_DMA_INT_BINT10	(0x00000400)
+#define NS9750_BBUS_DMA_INT_BINT9 	(0x00000200)
+#define NS9750_BBUS_DMA_INT_BINT8 	(0x00000100)
+#define NS9750_BBUS_DMA_INT_BINT7 	(0x00000080)
+#define NS9750_BBUS_DMA_INT_BINT6 	(0x00000040)
+#define NS9750_BBUS_DMA_INT_BINT5 	(0x00000020)
+#define NS9750_BBUS_DMA_INT_BINT4 	(0x00000010)
+#define NS9750_BBUS_DMA_INT_BINT3 	(0x00000008)
+#define NS9750_BBUS_DMA_INT_BINT2 	(0x00000004)
+#define NS9750_BBUS_DMA_INT_BINT1 	(0x00000002)
+#define NS9750_BBUS_DMA_INT_BINT0 	(0x00000001)
+
+#define NS9750_BBUS_USB_CFG_OUTEN	(0x00000008)
+#define NS9750_BBUS_USB_CFG_SPEED	(0x00000004)
+#define NS9750_BBUS_USB_CFG_CFG_MA	(0x00000003)
+#define NS9750_BBUS_USB_CFG_CFG_HOST_SOFT (0x00000003)
+#define NS9750_BBUS_USB_CFG_CFG_DEVICE	(0x00000002)
+#define NS9750_BBUS_USB_CFG_CFG_HOST	(0x00000001)
+#define NS9750_BBUS_USB_CFG_CFG_DIS	(0x00000000)
+
+#define NS9750_BBUS_ENDIAN_CFG_AHBM	(0x00001000)
+#define NS9750_BBUS_ENDIAN_CFG_I2C	(0x00000080)
+#define NS9750_BBUS_ENDIAN_CFG_IEEE1284	(0x00000040)
+#define NS9750_BBUS_ENDIAN_CFG_SER4	(0x00000020)
+#define NS9750_BBUS_ENDIAN_CFG_SER3	(0x00000010)
+#define NS9750_BBUS_ENDIAN_CFG_SER2	(0x00000008)
+#define NS9750_BBUS_ENDIAN_CFG_SER1	(0x00000004)
+#define NS9750_BBUS_ENDIAN_CFG_USB	(0x00000002)
+#define NS9750_BBUS_ENDIAN_CFG_DMA	(0x00000001)
+
+#endif /* FS_NS9750_BBUS_H */