* Patch by Rune Torgersen, 13 Feb 2003:LABEL_2003_03_06_0200

  Add support for Motorola MPC8266ADS board

* Patch by Kyle Harris, 19 Feb 2003:
  patches for the Intel lubbock board:
  memsetup.S - general cleanup (based on Robert's csb226 code)
  flash.c - overhaul, actually works now
  lubbock.c - fix init funcs to return proper value

* Patch by Kenneth Johansson, 26 Feb 2003:
  - Fixed off by one in RFTA calculation.
  - No need to abort when LDF is lower than we can program it's only
    minimum timing so clamp it to what we can do.
  - Takes function pointer to function for reading the spd_nvram. Usefull
    for faking data or hardcode a module without the nvram.
  - fix other user for above change
  - fix some comments.

* Patches by Brian Waite, 26 Feb 2003:
  - fix port for evb64260 board
  - fix PCI for evb64260 board
  - fix PCI scan

* Patch by Reinhard Meyer, 1 Mar 2003:
  Add support for EMK TOP860 Module

* Patch by Yuli Barcohen, 02 Mar 2003:
  Add SPD EEPROM support for MPC8260ADS board

8 files changed, 955 insertions, 10 deletions

diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index b4d8406aa5d..7968c8b2b15 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -99,8 +99,17 @@
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 
+#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
+#define CONFIG_SPD_ADDR         0x50
+#endif
+
+#ifndef CONFIG_SDRAM_PBI
+#define CONFIG_SDRAM_PBI        1 /* By default, use page-based interleaving */
+#endif
 
+#ifndef CONFIG_8260_CLKIN
 #define CONFIG_8260_CLKIN	66666666	/* in Hz */
+#endif
 #define CONFIG_BAUDRATE		115200
 
 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
new file mode 100644
index 00000000000..e72ce0a78ad
--- /dev/null
+++ b/include/configs/MPC8266ADS.h
@@ -0,0 +1,411 @@
+/*
+ * (C) Copyright 2001
+ * Stuart Hughes <stuarth@lineo.com>
+ * This file is based on similar values for other boards found in other
+ * U-Boot config files, and some that I found in the mpc8260ads manual.
+ *
+ * Note: my board is a PILOT rev.
+ * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Config header file for a MPC8260ADS Pilot 16M Ram Simm, 8Mbytes Flash Simm
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
+#define CONFIG_MPC8260ADS	1	/* ...on motorola ads board */
+
+#define CONFIG_BOARD_PRE_INIT	1	/* Call board_pre_init	*/
+
+/* allow serial and ethaddr to be overwritten */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere (for example, on the cogent platform, there are serial
+ * ports on the motherboard which are used for the serial console - see
+ * cogent/cma101/serial.[ch]).
+ */
+#undef	CONFIG_CONS_ON_SMC		/* define if console on SMC */
+#define CONFIG_CONS_ON_SCC		/* define if console on SCC */
+#undef	CONFIG_CONS_NONE		/* define if console on something else */
+#define CONFIG_CONS_INDEX	1	/* which serial channel for console */
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC   */
+#define CONFIG_ETHER_ON_FCC		/* define if ether on FCC   */
+#undef	CONFIG_ETHER_NONE		/* define if ether on something else */
+#define CONFIG_ETHER_INDEX	2	/* which channel for ether  */
+
+#if (CONFIG_ETHER_INDEX == 2)
+
+/*
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - Select bus for bd/buffers (see 28-13)
+ * - Half duplex
+ */
+# define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+# define CFG_CPMFCR_RAMTYPE	0
+# define CFG_FCC_PSMR		0
+
+#endif	/* CONFIG_ETHER_INDEX */
+
+/* other options */
+#define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+
+/*-----------------------------------------------------------------------
+ * Definitions for Serial Presence Detect EEPROM address
+ * (to get SDRAM settings)
+ */
+#define SPD_EEPROM_ADDRESS      0x50
+
+
+#define CONFIG_8260_CLKIN	66666666	/* in Hz */
+#define CONFIG_BAUDRATE		115200
+
+
+#define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
+				 CFG_CMD_BEDBUG | \
+				 CFG_CMD_BSP	| \
+				 CFG_CMD_DATE	| \
+				 CFG_CMD_DOC	| \
+				 CFG_CMD_DTT	| \
+				 CFG_CMD_EEPROM | \
+				 CFG_CMD_ELF    | \
+				 CFG_CMD_FDC	| \
+				 CFG_CMD_FDOS	| \
+				 CFG_CMD_HWFLOW	| \
+				 CFG_CMD_IDE	| \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_KGDB	| \
+				 CFG_CMD_MII	| \
+				 CFG_CMD_PCI	| \
+				 CFG_CMD_PCMCIA | \
+				 CFG_CMD_SCSI	| \
+				 CFG_CMD_SPI	| \
+				 CFG_CMD_VFD	| \
+				 CFG_CMD_USB	) )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+#define CONFIG_BOOTCOMMAND	"bootm 100000"	/* autoboot command */
+#define CONFIG_BOOTARGS		"root=/dev/ram rw"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
+#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
+#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
+#define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
+#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
+#endif
+
+#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE	256			/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS	16			/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
+					/* for versions < 2.4.5-pre5	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CFG_FLASH_BASE		0xff800000
+#define FLASH_BASE		0xff800000
+#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
+#define CFG_MAX_FLASH_SECT	32	/* max num of sects on one chip */
+#define CFG_FLASH_SIZE		8
+#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)    */
+#define CFG_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms)    */
+
+#undef	CFG_FLASH_CHECKSUM
+
+/* this is stuff came out of the Motorola docs */
+/* Only change this if you also change the Hardware configuration Word */
+#define CFG_DEFAULT_IMMR	0x0F010000
+
+/*
+#define CFG_IMMR		0x04700000
+#define CFG_BCSR		0x04500000
+*/
+
+/* Set IMMR to 0xF0000000 or above to boot Linux  */
+#define CFG_IMMR		0xF0000000
+#define CFG_BCSR		0x04500000
+
+/* Define CONFIG_VERY_BIG_RAM to allow use of SDRAMs larger than 256MBytes
+ */
+/*#define CONFIG_VERY_BIG_RAM	1*/
+
+/* What should be the base address of SDRAM DIMM and how big is
+ * it (in Mbytes)?  This will normally auto-configure via the SPD.
+*/
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE 16
+
+#define SDRAM_SPD_ADDR 0x50
+
+
+/*-----------------------------------------------------------------------
+ * BR2,BR3 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR2,OR3 - Option Register
+ *     Ref: Section 10.3.2 on page 10-16
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 2,3 - SDRAM DIMM
+ */
+
+/* The BR2 is configured as follows:
+ *
+ *     - Base address of 0x00000000
+ *     - 64 bit port size (60x bus only)
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - SDRAM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR2_PRELIM	((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+#define CFG_BR3_PRELIM	((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+/* With a 64 MB DIMM, the OR2 is configured as follows:
+ *
+ *     - 64 MB
+ *     - 4 internal banks per device
+ *     - Row start address bit is A8 with PSDMR[PBI] = 0
+ *     - 12 row address lines
+ *     - Back-to-back page mode
+ *     - Internal bank interleaving within save device enabled
+ */
+#if (CFG_SDRAM_SIZE == 64)
+#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM_SIZE)	|\
+			 ORxS_BPD_4			|\
+			 ORxS_ROWST_PBI0_A8		|\
+			 ORxS_NUMR_12)
+#elif (CFG_SDRAM_SIZE == 16)
+#define CFG_OR2_PRELIM	(0xFF000CA0)
+#else
+#error "INVALID SDRAM CONFIGURATION"
+#endif
+
+/*-----------------------------------------------------------------------
+ * PSDMR - 60x Bus SDRAM Mode Register
+ *     Ref: Section 10.3.3 on page 10-21
+ *-----------------------------------------------------------------------
+ */
+
+#if (CFG_SDRAM_SIZE == 64)
+/* With a 64 MB DIMM, the PSDMR is configured as follows:
+ *
+ *     - Bank Based Interleaving,
+ *     - Refresh Enable,
+ *     - Address Multiplexing where A5 is output on A14 pin
+ *	 (A6 on A15, and so on),
+ *     - use address pins A14-A16 as bank select,
+ *     - A9 is output on SDA10 during an ACTIVATE command,
+ *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ *	 is 3 clocks,
+ *     - earliest timing for READ/WRITE command after ACTIVATE command is
+ *	 2 clocks,
+ *     - earliest timing for PRECHARGE after last data was read is 1 clock,
+ *     - earliest timing for PRECHARGE after last data was written is 1 clock,
+ *     - CAS Latency is 2.
+ */
+#define CFG_PSDMR	(PSDMR_RFEN	      |\
+			 PSDMR_SDAM_A14_IS_A5 |\
+			 PSDMR_BSMA_A14_A16   |\
+			 PSDMR_SDA10_PBI0_A9  |\
+			 PSDMR_RFRC_7_CLK     |\
+			 PSDMR_PRETOACT_3W    |\
+			 PSDMR_ACTTORW_2W     |\
+			 PSDMR_LDOTOPRE_1C    |\
+			 PSDMR_WRC_1C	      |\
+			 PSDMR_CL_2)
+#elif (CFG_SDRAM_SIZE == 16)
+/* With a 16 MB DIMM, the PSDMR is configured as follows:
+ *
+ *   configuration parameters found in Motorola documentation
+ */
+#define CFG_PSDMR	(0x016EB452)
+#else
+#error "INVALID SDRAM CONFIGURATION"
+#endif
+
+
+#define RS232EN_1		0x02000002
+#define RS232EN_2		0x01000001
+#define FETHIEN			0x08000008
+#define FETH_RST		0x04000004
+
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+
+/* 0x0EA28205 */
+/*#define CFG_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
+			    ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 )    |\
+			    ( HRCW_BMS | HRCW_APPC10 )			    |\
+			    ( HRCW_MODCK_H0101 )			     \
+			)
+*/
+
+/* This value should actually be situated in the first 256 bytes of the FLASH
+	which on the standard MPC8266ADS board is at address 0xFF800000
+	The linker script places it at 0xFFF00000 instead.
+
+	It still works, however, as long as the ADS board jumper JP3 is set to 
+	position 2-3 so the board is using the BCSR as Hardware Configuration Word 
+
+	If you want to use the one defined here instead, ust copy the first 256 bytes from 
+	0xfff00000 to 0xff800000  (for 8MB flash) 
+
+	- Rune
+
+	*/
+#define CFG_HRCW_MASTER 0x0cb23645
+
+/* no slaves */
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
+
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM	0x02	/* Software reboot	     */
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#ifndef CFG_RAMBOOT
+#  define CFG_ENV_IS_IN_FLASH	1
+#    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 0x40000)
+#    define CFG_ENV_SECT_SIZE	0x40000
+#else
+#  define CFG_ENV_IS_IN_NVRAM	1
+#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#  define CFG_ENV_SIZE		0x200
+#endif /* CFG_RAMBOOT */
+
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )
+
+#define CFG_HID2		0
+
+#define CFG_SYPCR		0xFFFFFFC3
+#define CFG_BCR			0x100C0000
+#define CFG_SIUMCR		0x0A200000
+#define CFG_SCCR		0x00000000
+#define CFG_BR0_PRELIM		0xFF801801
+#define CFG_OR0_PRELIM		0xFF800836
+#define CFG_BR1_PRELIM		0x04501801
+#define CFG_OR1_PRELIM		0xFFFF8010
+
+#define CFG_RMR			0
+#define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+#define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
+#define CFG_RCCR		0
+/*#define CFG_PSDMR		0x016EB452*/
+#define CFG_MPTPR		0x00001900
+#define CFG_PSRT		0x00000021
+
+#define CFG_RESET_ADDRESS	0x04400000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
new file mode 100644
index 00000000000..f902685b325
--- /dev/null
+++ b/include/configs/TOP860.h
@@ -0,0 +1,439 @@
+/*
+ * (C) Copyright 2003
+ * EMK Elektronik GmbH <www.emk-elektronik.de>
+ * Reinhard Meyer <r.meyer@emk-elektronik.de>
+ *
+ * Configuation settings for the TOP860 board.
+ *
+ * -----------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * TOP860 is a simple module:

+ * 16-bit wide FLASH on CS0	(2MB or more)

+ * 32-bit wide DRAM on CS2 (either 4MB or 16MB)

+ * FEC with Am79C874 100-Base-T and Fiber Optic

+ * Ports available, but we choose SMC1 for Console

+ * 8k I2C EEPROM at address 0xae, 6k user available, 2k factory set
+ * 32768Hz crystal PLL set for 49.152MHz Core and 24.576MHz Bus Clock

+ *

+ * This config has been copied from MBX.h / MBX860T.h

+ */
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+/*-----------------------------------------------------------------------
+ * CPU and BOARD type
+ */
+#define CONFIG_MPC860	1	/* This is a MPC860 CPU		*/
+#define CONFIG_MPC860T	1	/* even better... an FEC!	*/
+#define CONFIG_TOP860	1	/* ...on a TOP860 module	*/
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#define	CONFIG_IDENT_STRING " EMK TOP860"

+
+/*-----------------------------------------------------------------------
+ * CLOCK settings
+ */
+#define	CONFIG_SYSCLK	49152000

+#define	CFG_XTAL		32768

+#define	CONFIG_EBDF		1

+#define	CONFIG_COM		3

+#define	CONFIG_RTC_MPC8xx

+

+/*-----------------------------------------------------------------------
+ * Physical memory map as defined by EMK
+ */
+#define CFG_IMMR		0xFFF00000	/* Internal Memory Mapped Register */
+#define	CFG_FLASH_BASE	0x80000000	/* FLASH in final mapping */

+#define	CFG_DRAM_BASE	0x00000000	/* DRAM in final mapping */

+#define	CFG_FLASH_MAX	0x00400000	/* max FLASH to expect */

+#define	CFG_DRAM_MAX	0x01000000	/* max DRAM to expect */

+

+/*-----------------------------------------------------------------------
+ * derived values
+ */
+#define	CFG_MF			(CONFIG_SYSCLK/CFG_XTAL)

+#define	CFG_CPUCLOCK	CONFIG_SYSCLK

+#define	CFG_BRGCLOCK	CONFIG_SYSCLK

+#define	CFG_BUSCLOCK	(CONFIG_SYSCLK >> CONFIG_EBDF)

+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define	CONFIG_8xx_GCLK_FREQ	CONFIG_SYSCLK

+

+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+

+#define	CFG_FLASH_CFI

+
+/*-----------------------------------------------------------------------
+ * Command interpreter
+ */
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#define CONFIG_BAUDRATE		9600
+

+/*
+ * Allow partial commands to be matched to uniqueness.
+ */
+#define CFG_MATCH_PARTIAL_CMD
+
+/*
+ * List of available monitor commands.  Use the system default list
+ * plus add some of the "non-standard" commands back in.
+ * See ./cmd_confdefs.h
+ */
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+								CFG_CMD_ASKENV	| \
+								CFG_CMD_DHCP	| \
+								CFG_CMD_I2C		| \
+								CFG_CMD_EEPROM	| \
+								CFG_CMD_REGINFO	| \
+								CFG_CMD_IMMAP	| \
+								CFG_CMD_ELF		| \
+								CFG_CMD_DATE	| \
+								CFG_CMD_MII 	| \
+								CFG_CMD_BEDBUG	\
+						      )
+
+#define	CONFIG_AUTOSCRIPT		1

+#define	CFG_LOADS_BAUD_CHANGE	1

+#undef	CONFIG_LOADS_ECHO			/* NO echo on for serial download	*/
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+

+#undef	CFG_HUSH_PARSER			/* Hush parse for U-Boot	*/
+

+#ifdef	CFG_HUSH_PARSER
+ #define CFG_PROMPT_HUSH_PS2	"> "
+#endif
+

+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+ #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+

+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+/*-----------------------------------------------------------------------
+ * Memory Test Command
+ */
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+

+/*-----------------------------------------------------------------------
+ * Environment handler
+ * only the first 6k in EEPROM are available for user. Of that we use 256b
+ */
+#define	CONFIG_SOFT_I2C

+#define CFG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
+#define CFG_ENV_OFFSET		0x1000
+#define CFG_ENV_SIZE		0x0700

+#define CFG_I2C_EEPROM_ADDR 0x57

+#define CFG_FACT_OFFSET		0x1800
+#define CFG_FACT_SIZE		0x0800

+#define CFG_I2C_FACT_ADDR	0x57

+#define CFG_EEPROM_PAGE_WRITE_BITS 3

+#define CFG_I2C_EEPROM_ADDR_LEN 2

+#define CFG_EEPROM_SIZE 0x2000
+#define	CFG_I2C_SPEED	100000
+#define	CFG_I2C_SLAVE	0xFE

+#define	CFG_EEPROM_PAGE_WRITE_DELAY_MS 12

+#define CONFIG_ENV_OVERWRITE

+#define CONFIG_MISC_INIT_R

+

+#if defined (CONFIG_SOFT_I2C)

+#define	SDA	0x00010

+#define	SCL	0x00020

+#define DIR immr->im_cpm.cp_pbdir

+#define DAT	immr->im_cpm.cp_pbdat

+#define PAR	immr->im_cpm.cp_pbpar

+#define	ODR	immr->im_cpm.cp_pbodr

+#define	I2C_INIT	{PAR&=~(SDA|SCL);ODR&=~(SDA|SCL);DAT|=(SDA|SCL);DIR|=(SDA|SCL);}

+#define	I2C_READ	((DAT&SDA)?1:0)

+#define	I2C_SDA(x)	{if(x)DAT|=SDA;else DAT&=~SDA;}

+#define	I2C_SCL(x)	{if(x)DAT|=SCL;else DAT&=~SCL;}

+#define	I2C_DELAY	{udelay(5);}

+#define	I2C_ACTIVE	 {DIR|=SDA;}

+#define	I2C_TRISTATE {DIR&=~SDA;}

+#endif
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*-----------------------------------------------------------------------
+ * defines we need to get FEC running
+ */

+#define	CONFIG_NET_MULTI	1	/* the only way to get the FEC in */
+#define CONFIG_FEC_ENET 	1	/* Ethernet only via FEC	*/
+#define	FEC_ENET			1	/* eth.c needs it that way... */

+#define CFG_DISCOVER_PHY	1
+#define CONFIG_MII			1
+#define CONFIG_PHY_ADDR		31
+

+/*-----------------------------------------------------------------------
+ * adresses
+ */

+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+

+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x80000000
+

+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2f00	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_VPD_SIZE	256 /* size in bytes reserved for vpd buffer */
+#define CFG_INIT_VPD_OFFSET	(CFG_GBL_DATA_OFFSET - CFG_INIT_VPD_SIZE)
+#define CFG_INIT_SP_OFFSET	(CFG_INIT_VPD_OFFSET-8)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/* Interrupt level assignments.
+*/
+#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+/*-----------------------------------------------------------------------
+ * Debug Enable Register
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0					/* used in start.S */
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * set up PLPRCR (PLL, Low-Power, and Reset Control Register)

+ *	12	MF		calculated	Multiplication factor

+ *	4	0		0000

+ *	1	SPLSS	0			System PLL lock status sticky

+ *	1	TEXPS	1			Timer expired status

+ *	1	0		0

+ *	1	TMIST	0			Timers interrupt status

+ *	1	0		0

+ *	1	CSRC	0			Clock source (0=DFNH, 1=DFNL)

+ *	2	LPM		00			Low-power modes

+ *	1	CSR		0			Checkstop reset enable

+ *	1	LOLRE	0			Loss-of-lock reset enable

+ *	1	FIOPD	0			Force I/O pull down

+ *	5	0		00000			

+ */
+#define CFG_PLPRCR	(PLPRCR_TEXPS | ((CFG_MF-1)<<20))
+

+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * set up SYPCR:

+ *	16	SWTC	0xffff		Software watchdog timer count

+ *	8	BMT		0xff 		Bus monitor timing

+ *	1	BME		1			Bus monitor enable

+ *	3	0		000

+ *	1	SWF		1			Software watchdog freeze

+ *	1	SWE		0/1			Software watchdog enable

+ *	1	SWRI	0/1			Software watchdog reset/interrupt select (1=HRESET)

+ *	1	SWP		0/1			Software watchdog prescale (1=/2048)

+ */
+#if defined (CONFIG_WATCHDOG)
+ #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 		 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+ #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * set up SIUMCR

+ *	1	EARB	0			External arbitration

+ *	3	EARP	000			External arbitration request priority

+ *	4	0		0000

+ *	1	DSHW	0			Data show cycles

+ *	2	DBGC	00			Debug pin configuration

+ *	2	DBPC	00			Debug port pins configuration

+ *	1	0		0

+ *	1	FRC		0			FRZ pin configuration

+ *	1	DLK		0			Debug register lock

+ *	1	OPAR	0			Odd parity

+ *	1	PNCS	0			Parity enable for non memory controller regions

+ *	1	DPC		0			Data parity pins configuration

+ *	1	MPRE	0			Multiprocessor reservation enable

+ *	2	MLRC	11			Multi level reservation control (00=IRQ4, 01=3State, 10=KR/RETRY, 11=SPKROUT)

+ *	1	AEME	0			Async external master enable

+ *	1	SEME	0			Sync external master enable

+ *	1	BSC		0			Byte strobe configuration

+ *	1	GB5E	0			GPL_B5 enable

+ *	1	B2DD	0			Bank 2 double drive			

+ *	1	B3DD	0			Bank 3 double drive			

+ *	4	0		0000

+ */
+#define CFG_SIUMCR	(SIUMCR_MLRC11)
+

+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF | PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * set up SCCR (System Clock and Reset Control Register)

+ *	1	0		0

+ *	2	COM		11			Clock output module (00=full, 01=half, 11=off)

+ *	3	0		000

+ *	1	TBS		1			Timebase source (0=OSCCLK, 1=GCLK2)

+ *	1	RTDIV	0			Real-time clock divide (0=/4, 1=/512)

+ *	1	RTSEL	0			Real-time clock select (0=OSCM, 1=EXTCLK)

+ *	1	CRQEN	0			CPM request enable

+ *	1	PRQEN	0			Power management request enable

+ *	2	0		00

+ *	2	EBDF	xx			External bus division factor

+ *	2	0		00

+ *	2	DFSYNC	00			Division factor for SYNCLK

+ *	2	DFBRG	00			Division factor for BRGCLK

+ *	3	DFNL	000			Division factor low frequency

+ *	3	DFNH	000			Division factor high frequency

+ *	5	0		00000

+ */
+#define SCCR_MASK	0
+#if CONFIG_EBDF

+ #define CFG_SCCR	(SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
+#else

+ #define CFG_SCCR	(SCCR_COM11 | SCCR_TBS)
+#endif

+
+/*-----------------------------------------------------------------------
+ * Chip Select 0 - FLASH
+ *-----------------------------------------------------------------------
+ * Preliminary Values
+ */
+/* FLASH timing: CSNT=1 ACS=10 BIH=1 SCY=4 SETA=0 TLRX=1 EHTR=1	*/
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR)
+#define CFG_OR0_PRELIM	(-CFG_FLASH_MAX | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | BR_PS_16 | BR_V )
+

+/*-----------------------------------------------------------------------
+ * misc
+ *-----------------------------------------------------------------------
+ *
+ */
+/*
+ * Set the autoboot delay in seconds.  A delay of -1 disables autoboot
+ */
+#define CONFIG_BOOTDELAY				5
+
+/*
+ * Pass the clock frequency to the Linux kernel in units of MHz
+ */
+#define	CONFIG_CLOCKS_IN_MHZ
+
+#define CONFIG_PREBOOT		\
+	"echo;echo"
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND	\
+	"bootp;" \
+	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+	"bootm"
+
+/*
+ * BOOTP options
+ */
+#undef	CONFIG_BOOTP_MASK

+#define CONFIG_BOOTP_MASK				( CONFIG_BOOTP_DEFAULT		| \
+									  	  CONFIG_BOOTP_BOOTFILESIZE   \
+										)

+										

+
+/*
+ * Set default IP stuff just to get bootstrap entries into the
+ * environment so that we can autoscript the full default environment.
+ */
+#define CONFIG_ETHADDR					9a:52:63:15:85:25
+#define CONFIG_SERVERIP					10.0.4.200
+#define CONFIG_IPADDR					10.0.4.111
+

+/*-----------------------------------------------------------------------
+ * Defaults for Autoscript
+ */
+#define CFG_LOAD_ADDR		0x00100000	/* default load address */
+#define	CFG_TFTP_LOADADDR	0x00100000
+

+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+

+#endif	/* __CONFIG_H */
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 1b867e056d3..b5610c9506f 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -81,7 +81,7 @@
 #define CONFIG_HW_WATCHDOG			/* HW Watchdog, board specific	*/
 
 #define	CONFIG_SPD_EEPROM			/* SPD EEPROM for SDRAM param.	*/
-
+#define CONFIG_SPDDRAM_SILENT			/* No output if spd fails	*/
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 0c06e9181f0..89373b90402 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -87,7 +87,7 @@
 #define CONFIG_HW_WATCHDOG			/* HW Watchdog, board specific	*/
 
 #define	CONFIG_SPD_EEPROM			/* SPD EEPROM for SDRAM param.	*/
-
+#define CONFIG_SPDDRAM_SILENT			/* No output if spd fails	*/
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 187c33f294e..87282acc398 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -70,12 +70,13 @@
 #include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY        3
-#define CONFIG_BOOTARGS         "root=ramfs devfs=mount console=ttySA0,9600"
 #define CONFIG_ETHADDR          08:00:3e:26:0a:5b
 #define CONFIG_NETMASK          255.255.0.0
 #define CONFIG_IPADDR           192.168.0.21
 #define CONFIG_SERVERIP         192.168.0.250
-#define CONFIG_BOOTCOMMAND      "FIXME"
+#define CONFIG_BOOTCOMMAND      "bootm 40000"
+#define CONFIG_BOOTARGS         "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
+#define CONFIG_CMDLINE_TAG      
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
@@ -100,7 +101,7 @@
 #define CFG_LOAD_ADDR           0xa8000000      /* default load address */
 
 #define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
+#define CFG_CPUSPEED            0x161           /* set core clock to 400/200/100 MHz */
 
                                                 /* valid baudrates */
 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
@@ -130,8 +131,10 @@
 #define PHYS_SDRAM_4_SIZE       0x00000000 /* 0 MB */
 
 #define PHYS_FLASH_1            0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2            0x04000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2            0x04000000 /* Flash Bank #2 */
 #define PHYS_FLASH_SIZE         0x02000000 /* 32 MB */
+#define PHYS_FLASH_BANK_SIZE    0x02000000 /* 32 MB Banks */
+#define PHYS_FLASH_SECT_SIZE    0x00040000 /* 256 KB sectors (x2) */
 
 #define CFG_DRAM_BASE           0xa0000000
 #define CFG_DRAM_SIZE           0x04000000
@@ -168,8 +171,7 @@
 #define CFG_MSC1_VAL        0x3FF1A441
 #define CFG_MSC2_VAL        0x7FF17FF1
 #define CFG_MDCNFG_VAL      0x00001AC9
-#define CFG_MDREFR_VAL      0x000BC018
-#define CFG_MDREFR_VAL_100  0x00018018
+#define CFG_MDREFR_VAL      0x00018018
 #define CFG_MDMRS_VAL       0x00000000
 
 /*
@@ -193,8 +195,8 @@
 #define CFG_MAX_FLASH_SECT      128  /* max number of sectors on one chip    */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_ERASE_TOUT    (25*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT    (25*CFG_HZ) /* Timeout for Flash Write */
 
 /* FIXME */
 #define	CFG_ENV_IS_IN_FLASH	1
diff --git a/include/spd.h b/include/spd.h
new file mode 100644
index 00000000000..1ad4d801f52
--- /dev/null
+++ b/include/spd.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2003 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * Serial Presence Detect (SPD) EEPROM format according to the
+ * Intel's PC SDRAM Serial Presence Detect (SPD) Specification,
+ * revision 1.2B, November 1999
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPD_H_
+#define _SPD_H_
+
+typedef struct spd_eeprom_s {
+   unsigned char info_size;   /* # of bytes written into serial memory           */
+   unsigned char chip_size;   /* Total # of bytes of SPD memory device           */
+   unsigned char mem_type;    /* Fundamental memory type (FPM, EDO, SDRAM...)    */
+   unsigned char nrow_addr;   /* # of Row Addresses on this assembly             */
+   unsigned char ncol_addr;   /* # of Column Addresses on this assembly          */
+   unsigned char nrows;       /* # of Module Rows on this assembly               */
+   unsigned char dataw_lsb;   /* Data Width of this assembly                     */
+   unsigned char dataw_msb;   /* ... Data Width continuation                     */
+   unsigned char voltage;     /* Voltage interface standard of this assembly     */
+   unsigned char clk_cycle;   /* SDRAM Cycle time at CL=X                        */
+   unsigned char clk_access;  /* SDRAM Access from Clock at CL=X                 */
+   unsigned char config;      /* DIMM Configuration type (non-parity, ECC)       */
+   unsigned char refresh;     /* Refresh Rate/Type                               */
+   unsigned char primw;       /* Primary SDRAM Width                             */
+   unsigned char ecw;         /* Error Checking SDRAM width                      */
+   unsigned char min_delay;   /* Min Clock Delay for Back to Back Random Address */
+   unsigned char burstl;      /* Burst Lengths Supported                         */
+   unsigned char nbanks;      /* # of Banks on Each SDRAM Device                 */
+   unsigned char cas_lat;     /* CAS# Latencies Supported                        */
+   unsigned char cs_lat;      /* CS# Latency                                     */
+   unsigned char write_lat;   /* Write Latency (also called Write Recovery time) */
+   unsigned char mod_attr;    /* SDRAM Module Attributes                         */
+   unsigned char dev_attr;    /* SDRAM Device Attributes                         */
+   unsigned char clk_cycle2;  /* Min SDRAM Cycle time at CL=X-1                  */
+   unsigned char clk_access2; /* SDRAM Access from Clock at CL=X-1               */
+   unsigned char clk_cycle3;  /* Min SDRAM Cycle time at CL=X-2                  */
+   unsigned char clk_access3; /* Max SDRAM Access from Clock at CL=X-2           */
+   unsigned char trp;         /* Min Row Precharge Time (tRP)                    */
+   unsigned char trrd;        /* Min Row Active to Row Active (tRRD)             */
+   unsigned char trcd;        /* Min RAS to CAS Delay (tRCD)                     */
+   unsigned char tras;        /* Minimum RAS Pulse Width (tRAS)                  */
+   unsigned char row_dens;    /* Density of each row on module                   */
+   unsigned char ca_setup;    /* Command and Address signal input setup time     */
+   unsigned char ca_hold;     /* Command and Address signal input hold time      */
+   unsigned char data_setup;  /* Data signal input setup time                    */
+   unsigned char data_hold;   /* Data signal input hold time                     */
+   unsigned char sset[26];    /* Superset Information (may be used in future)    */
+   unsigned char spd_rev;     /* SPD Data Revision Code                          */
+   unsigned char cksum;       /* Checksum for bytes 0-62                         */
+   unsigned char mid[8];      /* Manufacturer's JEDEC ID code per JEP-108E       */
+   unsigned char mloc;        /* Manufacturing Location                          */
+   unsigned char mpart[18];   /* Manufacturer's Part Number                      */
+   unsigned char rev[2];      /* Revision Code                                   */
+   unsigned char mdate[2];    /* Manufacturing Date                              */
+   unsigned char sernum[4];   /* Assembly Serial Number                          */
+   unsigned char mspec[27];   /* Manufacturer Specific Data                      */
+   unsigned char freq;        /* Intel specification frequency                   */
+   unsigned char intel_cas;   /* Intel Specification CAS# Latency support        */
+} spd_eeprom_t;
+
+#endif /* _SPD_H_ */
diff --git a/include/spd_sdram.h b/include/spd_sdram.h
new file mode 100644
index 00000000000..feb1bbd4c50
--- /dev/null
+++ b/include/spd_sdram.h
@@ -0,0 +1,6 @@
+#ifndef _SPD_SDRAM_H_
+#define _SPD_SDRAM_H_
+
+long int spd_sdram(int(read_spd)(uint addr));
+
+#endif