diff options
| author | Adam Graham <agraham@amcc.com> | 2009-02-09 13:18:12 -0800 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2009-02-12 06:08:07 +0100 |
| commit | c645012aefebb301e6907d148c6c8efacac049d4 (patch) | |
| tree | 86c34e03b359c06f8e946dd2efcafdab9c739aee /include | |
| parent | 2ede879fcb67470524847bb4fc8972651bb46184 (diff) | |
ppc4xx: Autocalibration can set RDCC to over aggressive value.
The criteria of the AMCC SDRAM Controller DDR autocalibration
U-Boot code is to pick the largest passing write/read/compare
window that also has the smallest SDRAM_RDCC.[RDSS] Read Sample
Cycle Select value.
On some Kilauea boards the DDR autocalibration algorithm can
find a large passing write/read/compare window with a small
SDRAM_RDCC.[RDSS] aggressive value of Read Sample Cycle Select
value "T1 Sample".
This SDRAM_RDCC.[RDSS] Read Sample Cycle Select value of
"T1 Sample" proves to be to aggressive when later on U-Boot
relocates into DDR memory and executes.
The memory traces on the Kilauea board are short so on some
Kilauea boards the SDRAM_RDCC.[RDSS] Read Sample Cycle Select
value of "T1 Sample" shows up as a potentially valid value for
the DDR autocalibratiion algorithm.
The fix is to define a weak default function which provides
the minimum SDRAM_RDCC.[RDSS] Read Sample Cycle Select value
to accept for DDR autocalibration. The default will be the
"T2 Sample" value. A board developer who has a well defined
board and chooses to be more aggressive can always provide
their own board specific string function with the more
aggressive "T1 Sample" value or stick with the default
minimum SDRAM_RDCC.[RDSS] value of "T2".
Also put in a autocalibration loop fix for case where current
write/read/compare passing window size is the same as a prior
window size, then in this case choose the write/read/compare
result that has the associated smallest RDCC T-Sample value.
Signed-off-by: Adam Graham <agraham@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-ppc/ppc4xx-sdram.h | 2 | ||||
| -rw-r--r-- | include/configs/kilauea.h | 7 |
2 files changed, 2 insertions, 7 deletions
diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h index 98faced366c..992a3d22105 100644 --- a/include/asm-ppc/ppc4xx-sdram.h +++ b/include/asm-ppc/ppc4xx-sdram.h @@ -566,6 +566,8 @@ #define SDRAM_RDCC_RSAE_MASK 0x00000001 #define SDRAM_RDCC_RSAE_DISABLE 0x00000001 #define SDRAM_RDCC_RSAE_ENABLE 0x00000000 +#define SDRAM_RDCC_RDSS_ENCODE(n) ((((u32)(n))&0x03)<<30) +#define SDRAM_RDCC_RDSS_DECODE(n) ((((u32)(n))>>30)&0x03) /* * SDRAM Read Feedback Delay Control Register diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 4d3ccf568ba..26cb854394a 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -234,16 +234,9 @@ * * DDR Autocalibration Method_B is the default. */ -#if 0 -/* - * Needs FIX!!! - * Disable autocalibration for now, because of the unresolved problem - * with kilauea board using 200MHz PLB/DDR2 frequency - */ #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */ #undef CONFIG_PPC4xx_DDR_METHOD_A -#endif #define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE) |