arm: omap3: devkit8000: inherit from ti_armv7_common.h

1 files changed, 36 insertions, 98 deletions

diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 77e2f587bde..182a1375dc3 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -16,12 +16,8 @@
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP3_DEVKIT8000	1	/* working with DevKit8000 */
 #define CONFIG_MACH_TYPE	MACH_TYPE_DEVKIT8000
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-#define CONFIG_SYS_GENERIC_BOARD
 
 /*
  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
@@ -31,11 +27,28 @@
  */
 #define CONFIG_SYS_TEXT_BASE	0x80100000
 
-#define CONFIG_SDRC	/* The chip has SDRC controller */
+#define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+
+#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap3.h>
 
+#define CONFIG_SDRC	/* The chip has SDRC controller */
+#define CONFIG_NAND
+#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
+							/* to access nand at */
+							/* CS0 */
+
+/*  Physical Memory Map  */
+#define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
+#define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_2			OMAP34XX_SDRC_CS1
+
+#include <configs/ti_armv7_common.h>
+
 /* Display CPU and Board information */
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1
@@ -46,16 +59,12 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
 #define CONFIG_REVISION_TAG		1
 
-#define CONFIG_OF_LIBFDT		1
-
 /* Size of malloc() pool */
 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
+#undef CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 
 /* Hardware drivers */
@@ -79,20 +88,15 @@
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
 #define CONFIG_SERIAL3			3
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 
-/* MMC */
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
+/* SPI */
+#undef CONFIG_SPI
+#undef CONFIG_OMAP3_SPI
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#undef CONFIG_SYS_I2C_OMAP24XX
 #define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL4030 */
@@ -100,8 +104,6 @@
 #define CONFIG_TWL4030_LED		1
 
 /* Board NAND Info */
-#define CONFIG_SYS_NO_FLASH		/* no NOR flash */
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:" \
 						"512k(x-loader)," \
@@ -110,14 +112,8 @@
 						"4m(kernel)," \
 						"-(fs)"
 
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
-#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
-							/* to access nand at */
-							/* CS0 */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
-							/* devices */
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"
@@ -127,20 +123,20 @@
 							/* partition */
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DHCP			/* DHCP support			*/
-#define CONFIG_CMD_EXT2			/* EXT2 Support			*/
-#define CONFIG_CMD_FAT			/* FAT support			*/
-#define CONFIG_CMD_I2C			/* I2C serial bus support	*/
 #define CONFIG_CMD_JFFS2		/* JFFS2 Support		*/
-#define CONFIG_CMD_MMC			/* MMC support			*/
-#define CONFIG_CMD_MTDPARTS		/* Enable MTD parts commands	*/
-#define CONFIG_CMD_NAND			/* NAND support			*/
 #define CONFIG_CMD_NAND_LOCK_UNLOCK	/* nand (un)lock commands	*/
 
 #undef CONFIG_CMD_FPGA			/* FPGA configuration Support	*/
 #undef CONFIG_CMD_IMI			/* iminfo			*/
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_GPIO
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BOOTZ
+#undef CONFIG_SUPPORT_RAW_INITRD
+#undef CONFIG_FAT_WRITE
+#undef CONFIG_CMD_EXT4
+#undef CONFIG_CMD_FS_GENERIC
 
 /* BOOTP/DHCP options */
 #define CONFIG_BOOTP_SUBNETMASK
@@ -157,10 +153,6 @@
 #undef CONFIG_BOOTP_VENDOREX
 
 /* Environment information */
-#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
-
-#define CONFIG_BOOTDELAY		3
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"console=ttyO2,115200n8\0" \
@@ -228,38 +220,17 @@
 
 #define CONFIG_BOOTCOMMAND "run autoboot"
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_AUTO_COMPLETE		1
-#define CONFIG_SYS_PROMPT		"OMAP3 DevKit8000 # "
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		128	/* max number of command args */
-
 /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0 + 0x07000000)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
 					0x01000000) /* 16MB */
 
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0 + 0x02000000)
-
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
  * This rate is divided by a local divisor.
  */
 #define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV			2 /* Divisor: 2^(PTV+1) => 8 */
-
-/*  Physical Memory Map  */
-#define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
-#define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2			OMAP34XX_SDRC_CS1
 
 /* NAND and environment organization  */
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
@@ -269,47 +240,22 @@
 
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE        0x800
-#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
-							 CONFIG_SYS_INIT_RAM_SIZE - \
-							 GENERATED_GBL_DATA_SIZE)
-
 /* SRAM config */
 #define CONFIG_SYS_SRAM_START              0x40200000
 #define CONFIG_SYS_SRAM_SIZE               0x10000
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#undef CONFIG_SPL_MTD_SUPPORT
 
 #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#undef CONFIG_SPL_STACK
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
 
-#define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-
 /* NAND boot config */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -325,26 +271,18 @@
 #define CONFIG_SYS_NAND_ECCBYTES	3
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
 
-#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
-
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x200000
 
-#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
-
 /* SPL OS boot options */
-#define CONFIG_SPL_OS_BOOT
-
-#define CONFIG_CMD_SPL
 #define CONFIG_CMD_SPL_WRITE_SIZE       0x400 /* 1024 byte */
 #define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\
 					0x400000)
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"args"
-
+#undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
+#undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
+#undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x500 /* address 0xa0000 */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x8   /* address 0x1000 */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	8     /* 4KB */