ARM: vf610: Initial integration for Colibri VF50/VF61

This adds initial support for Colibri VF50/VF61 based on Freescale
Vybrid SoC.

- CPU clocked at 396/500 MHz
- DDR3 at 396MHz
  - for VF50, use PLL2 as memory clock (synchronous mode)
  - for VF61, use PLL1 as memory clock (asynchronous mode)
- Console on UART0 (Colibri UART_A)
- Ethernet on FEC1
- PLL5 based RMII clocking (E.g. No external crystal)
- UART_A and UART_C I/O muxing
- Boot from NAND by default
- USB host and client support

Tested on Colibri VF50/VF61 booting using serial loader over UART.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>

1 files changed, 265 insertions, 0 deletions

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
new file mode 100644
index 0000000000..a6d38635f9
--- /dev/null
+++ b/include/configs/colibri_vf.h
@@ -0,0 +1,265 @@
+/*
+ * Copyright 2015 Toradex, Inc.
+ *
+ * Configuration settings for the Toradex VF50/VF61 module.
+ *
+ * Based on vf610twr.h:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_VF610
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_USE_ARCH_MEMCPY
+#define CONFIG_USE_ARCH_MEMSET
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_FSL_LPUART
+#define LPUART_BASE			UART0_BASE
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_SYS_UART_PORT		(0)
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_CMD_ASKENV
+
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
+
+/* Dynamic MTD partition support */
+#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+#define MTDIDS_DEFAULT		"nand0=vf610_nfc"
+#define MTDPARTS_DEFAULT	"mtdparts=vf610_nfc:"		\
+				"128k(vf-bcb)ro,"		\
+				"1408k(u-boot)ro,"		\
+				"512k(u-boot-env),"		\
+				"-(ubi)"
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT3
+#define CONFIG_CMD_EXT4
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_UBI
+#define CONFIG_MTD_UBI_FASTMAP
+#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE			ENET1_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE		RMII
+#define CONFIG_FEC_MXC_PHYADDR          0
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+
+#define CONFIG_IPADDR		192.168.10.2
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_SERVERIP		192.168.10.1
+
+#define CONFIG_BOOTDELAY		1
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_LOADADDR			0x80008000
+#define CONFIG_FDTADDR			0x84000000
+
+/* We boot from the gfxRAM area of the OCRAM. */
+#define CONFIG_SYS_TEXT_BASE		0x3f408000
+#define CONFIG_BOARD_SIZE_LIMIT		524288
+
+#define SD_BOOTCMD \
+	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
+	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
+	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
+	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
+	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
+	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define NFS_BOOTCMD \
+	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
+	"nfsboot=run setup; " \
+	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
+	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
+	"dhcp ${kernel_addr_r} && "	\
+	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
+	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define UBI_BOOTCMD	\
+	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
+	"ubi.fm_autoconvert=1\0" \
+	"ubiboot=run setup; " \
+	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
+	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
+	"ubi part ubi && ubifsmount ubi0:rootfs && " \
+	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
+	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
+	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
+
+#define DFU_ALT_NAND_INFO	"vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"kernel_addr_r=0x82000000\0" \
+	"fdt_addr_r=0x84000000\0" \
+	"kernel_file=zImage\0" \
+	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
+	"fdt_board=eval-v3\0" \
+	"defargs=\0" \
+	"console=ttyLP0\0" \
+	"setup=setenv setupargs " \
+		"fec_mac=${ethaddr} console=tty1 console=${console}" \
+		",${baudrate}n8 ${memargs}\0" \
+	"setupdate=fatload mmc 0:1 ${loadaddr} flash_mmc.img && " \
+		"source ${loadaddr}\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
+	SD_BOOTCMD \
+	NFS_BOOTCMD \
+	UBI_BOOTCMD
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"Colibri VFxx # "
+#undef CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		\
+			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80010000
+#define CONFIG_SYS_MEMTEST_END		0x87C00000
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_CMDLINE_EDITING
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
+
+/* Physical memory map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			(0x80000000)
+#define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* Environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
+#define CONFIG_ENV_SIZE			(8 * 1024)
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE			(64 * 2048)
+#define CONFIG_ENV_RANGE		(4 * 64 * 2048)
+#define CONFIG_ENV_OFFSET		(12 * 64 * 2048)
+#endif
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+/* USB Host support */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_VF
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
+/* USB Client Support */
+#define CONFIG_USB_GADGET
+#define CONFIG_CI_UDC
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_TRDX_VID                   0x1B67
+#define CONFIG_TRDX_PID_COLIBRI_VF50      0x0016
+#define CONFIG_TRDX_PID_COLIBRI_VF61      0x0017
+#define CONFIG_TRDX_PID_COLIBRI_VF61IT    0x0018
+#define CONFIG_TRDX_PID_COLIBRI_VF50IT    0x0019
+#define CONFIG_G_DNL_MANUFACTURER         "Toradex"
+#define CONFIG_G_DNL_VENDOR_NUM           CONFIG_TRDX_VID
+#define CONFIG_G_DNL_PRODUCT_NUM          CONFIG_TRDX_PID_COLIBRI_VF50
+
+/* USB DFU */
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_CMD_DFU
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_NAND
+#define CONFIG_DFU_MMC
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024*1024)
+
+/* USB Storage */
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+
+#endif /* __CONFIG_H */