colibri_t20: migrate

Migrate Colibri T20 to U-Boot 2016.11.

(cherry picked from commit 92d747bf338ceb8d6dbdd3e5e5f7f72226ce0792)

1 files changed, 102 insertions, 3 deletions

diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h
index 3c917b01506..d84850a28f8 100644
--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Lucas Stach
+ * Copyright (c) 2011-2016 Toradex, Inc.
  *
  * Configuration settings for the Toradex Colibri T20 modules.
  *
@@ -11,6 +11,7 @@
 
 #include "tegra20-common.h"
 
+#undef CONFIG_SYS_DCACHE_OFF		/* breaks L4T kernel boot */
 #define CONFIG_ARCH_MISC_INIT
 
 /* High-level configuration options */
@@ -23,6 +24,13 @@
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_COLIBRI_T20
 
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SERIAL_TAG
+
+/* Make the HW version stuff available in U-Boot env */
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA
 
@@ -68,8 +76,9 @@
 /* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		(SZ_2M)
-#undef CONFIG_ENV_SIZE		/* undef size from tegra20-common.h */
+#undef CONFIG_ENV_SIZE	/* undef size from tegra20-common.h */
 #define CONFIG_ENV_SIZE			(SZ_64K)
+#define CONFIG_ENV_RANGE		(SZ_1M)
 
 /* UBI */
 #define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
@@ -81,8 +90,93 @@
 /* Miscellaneous commands */
 #define CONFIG_FAT_WRITE
 
+#undef CONFIG_IPADDR
+#define CONFIG_IPADDR		192.168.10.2
+#define CONFIG_NETMASK		255.255.255.0
+#undef CONFIG_SERVERIP
+#define CONFIG_SERVERIP		192.168.10.1
+
+#define CONFIG_BOOTCOMMAND \
+	"run ubiboot; echo; echo ubiboot failed; " \
+	"run sdboot; echo; echo sdboot failed; " \
+	"run usbboot; echo; echo usbboot failed; " \
+	"run nfsboot; echo; echo nfsboot failed"
+
+#define DFU_ALT_NAND_INFO	"u-boot part 0,0;ubi part 0,3"
+
+#define NFS_BOOTCMD \
+	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
+	"nfsboot=usb start; run setup; setenv bootargs ${defargs} ${mtdparts}" \
+		" ${nfsargs} ${setupargs} ${vidargs}; echo Booting via DHCP/" \
+		"TFTP/NFS...; run nfsdtbload; dhcp ${kernel_addr_r} " \
+		"&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
+	"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
+		"${soc}-colibri-${fdt_board}.dtb " \
+		"&& setenv dtbparam ${fdt_addr_r}\0"
+
+#define SD_BOOTCMD \
+	"sdargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
+		"rootwait\0" \
+	"sdboot=run setup; setenv bootargs ${defargs} ${mtdparts} ${sdargs} " \
+		"${setupargs} ${vidargs}; echo Booting from SD card...; " \
+		"run sddtbload; load mmc 1:1 ${kernel_addr_r} ${boot_file} " \
+		"&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
+	"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
+		"${soc}-colibri-${fdt_board}.dtb " \
+		"&& setenv dtbparam ${fdt_addr_r}\0"
+
+#define UBI_BOOTCMD \
+	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
+		"ubi.fm_autoconvert=1\0" \
+	"ubiboot=run setup; setenv bootargs ${defargs} ${ubiargs} ${mtdparts}" \
+		" ${setupargs} ${vidargs}; echo Booting from NAND...; " \
+		"ubi part ubi && ubi read ${kernel_addr_r} kernel &&" \
+		"run ubidtbload && run fdt_fixup; " \
+		"bootz ${kernel_addr_r} - ${dtbparam}; " \
+		"bootz ${kernel_addr_r} - \0" \
+	"ubidtbload=setenv dtbparam; " \
+		"ubi read ${fdt_addr_r} dtb && " \
+		"setenv dtbparam ${fdt_addr_r}\0"
+
+#define USB_BOOTCMD \
+	"usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
+		"rootwait\0" \
+	"usbboot=run setup; setenv bootargs ${defargs} ${mtdparts} " \
+		"${setupargs} ${usbargs} ${vidargs}; echo Booting from USB " \
+		"stick...; usb start && run usbdtbload; load usb 0:1 " \
+		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
+		"bootz ${kernel_addr_r} - ${dtbparam}\0" \
+	"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
+		"${soc}-colibri-${fdt_board}.dtb " \
+		"&& setenv dtbparam ${fdt_addr_r}\0"
+
 #define BOARD_EXTRA_ENV_SETTINGS \
-	"mtdparts=" MTDPARTS_DEFAULT "\0"
+	"boot_file=zImage\0" \
+	"console=ttyS0\0" \
+	"defargs=vmalloc=128M usb_high_speed=1\0" \
+	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
+	"fdt_board=eval-v3\0" \
+	"fdt_fixup=;\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	NFS_BOOTCMD \
+	SD_BOOTCMD \
+	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
+		"00:14:2d:00:00:00; fi; usb start && tftpboot ${loadaddr} " \
+		"flash_eth.img && source ${loadaddr}\0" \
+	"setsdupdate=setenv interface mmc; setenv drive 0; mmc rescan; " \
+		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+		"source ${loadaddr}\0" \
+	"setup=setenv setupargs asix_mac=${ethaddr} " \
+		"consoleblank=0 no_console_suspend=1 console=tty1 " \
+		"console=${console},${baudrate}n8 debug_uartport=lsport,0 " \
+		"${memargs}\0" \
+	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
+	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
+		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+		"source ${loadaddr}\0" \
+	UBI_BOOTCMD \
+	USB_BOOTCMD \
+	"vidargs=video=tegrafb0:640x480-16@60\0"
 
 /* Increase console I/O buffer size */
 #undef CONFIG_SYS_CBSIZE
@@ -99,6 +193,11 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32
 
+#define CONFIG_CMD_TIME
+
+#define CONFIG_SUPPORT_RAW_INITRD
+#define CONFIG_SYS_BOOT_RAMDISK_HIGH
+
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"