* Make sure Block Lock Bits get cleared in R360MPI flash driver

* MPC823 LCD driver: Fill color map backwards, to allow for steady
  display when Linux takes over

* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS (this time for real).

* Add support for "bmp info" and "bmp display" commands to load
  bitmap images; this can be used (for example in a "preboot"
  command) to display a splash screen very quickly after poweron.

* Add support for 133 MHz clock on INCA-IP board

6 files changed, 11 insertions, 3 deletions

diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h
index 4e7ab9be4f5..170c38f5d76 100644
--- a/include/cmd_confdefs.h
+++ b/include/cmd_confdefs.h
@@ -79,6 +79,7 @@
 #define CFG_CMD_FDOS	0x0000200000000000	/* Floppy DOS support		*/
 #define CFG_CMD_VFD	0x0000400000000000	/* VFD support (TRAB)		*/
 #define CFG_CMD_NAND	0x0000800000000000	/* NAND support        		*/
+#define CFG_CMD_BMP	0x0001000000000000	/* BMP support			*/
 
 #define CFG_CMD_ALL	0xFFFFFFFFFFFFFFFF	/* ALL commands			*/
 
@@ -87,6 +88,7 @@
  */
 #define CFG_CMD_NONSTD (CFG_CMD_ASKENV	| \
 			CFG_CMD_BEDBUG	| \
+			CFG_CMD_BMP	| \
 			CFG_CMD_BSP	| \
 			CFG_CMD_CACHE	| \
 			CFG_CMD_DATE	| \
diff --git a/include/commproc.h b/include/commproc.h
index d02dea43ec8..e9b0ab7771c 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -1365,7 +1365,7 @@ typedef struct scc_enet {
 /***  TQM855L, TQM860L, TQM862L  **************************************/
 
 #if defined(CONFIG_TQM855L) || \
-    defined(CONFIG_TQM860L)
+    defined(CONFIG_TQM860L) || \
     defined(CONFIG_TQM862L)
 
 # ifdef CONFIG_SCC1_ENET	/* use SCC for 10Mbps Ethernet	*/
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index c7cf8a4294f..8aba25e06eb 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -40,6 +40,8 @@
 #undef  CONFIG_EDT32F10
 #define CONFIG_SHARP_LQ057Q3DC02
 
+#define	CONFIG_SPLASH_SCREEN
+
 #define MPC8XX_FACT             1		/* Multiply by 1	*/
 #define MPC8XX_XIN              50000000	/* 50 MHz in		*/
 #define CONFIG_8xx_GCLK_FREQ    50000000 /* define if can't use get_gclk_freq */
@@ -118,6 +120,7 @@
 #define CFG_I2C_TEM_ADDR	0x49	/* Temperature Sensors */
 
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_BMP	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_I2C	| \
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
index 3b648c1b571..027f3198287 100644
--- a/include/configs/incaip.h
+++ b/include/configs/incaip.h
@@ -31,8 +31,8 @@
 #define CONFIG_MIPS32		1	/* MIPS 4Kc CPU core	*/
 #define CONFIG_INCA_IP		1	/* on a INCA-IP Board	*/
 
-/* allowed values: 100000000 and 150000000 */
-#define CPU_CLOCK_RATE	150000000   /* 150 MHz clock for the MIPS core */
+/* allowed values: 100000000, 133000000, and 150000000 */
+#define CPU_CLOCK_RATE	133000000   /* 133 MHz clock for the MIPS core */
 
 #if CPU_CLOCK_RATE == 100000000
 #define INFINEON_EBU_BOOTCFG	0x20C4	/* CMULT = 4 for 100 MHz */
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 30e7882acb8..f80e134cb50 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -153,6 +153,7 @@
 				CFG_CMD_EEPROM	| \
 				CFG_CMD_IDE	| \
 				CFG_CMD_BSP	| \
+				CFG_CMD_BMP	| \
 				CFG_CMD_POST_DIAG )
 #else
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
@@ -162,6 +163,7 @@
 				CFG_CMD_EEPROM	| \
 				CFG_CMD_IDE	| \
 				CFG_CMD_BSP	| \
+				CFG_CMD_BMP	| \
 				CFG_CMD_POST_DIAG )
 #endif
 #define CONFIG_MAC_PARTITION
diff --git a/include/image.h b/include/image.h
index 72781dc273e..f9b769e9c58 100644
--- a/include/image.h
+++ b/include/image.h
@@ -45,6 +45,7 @@
 #define IH_OS_PSOS		15	/* pSOS		*/
 #define IH_OS_QNX		16	/* QNX		*/
 #define IH_OS_U_BOOT		17	/* Firmware	*/
+#define IH_OS_RTEMS		18	/* RTEMS	*/
 
 /*
  * CPU Architecture Codes (supported by Linux)