summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2008-05-08 11:05:15 +0200
committerStefan Roese <sr@denx.de>2008-05-08 11:05:15 +0200
commita00eccfebc954ad9485161efeca7d9aaf626d530 (patch)
tree3d429b4ad8ff15e3a14d0449a14bea5327818e3d /include
parentcb5d88b9611e0c35c53543ad3b4ab99fa82203e3 (diff)
ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
This patch adds fdt (flattened device tree) support to all remaining AMCC eval boards. Most newer boards already support device tree. With this patch, all AMCC boards now enable device tree passing from U-Boot to Linux arch/powerpc kernels. Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include')
-rw-r--r--include/configs/bamboo.h6
-rw-r--r--include/configs/bubinga.h5
-rw-r--r--include/configs/ebony.h6
-rw-r--r--include/configs/katmai.h2
-rw-r--r--include/configs/luan.h5
-rw-r--r--include/configs/ocotea.h5
-rw-r--r--include/configs/taihu.h5
-rw-r--r--include/configs/taishan.h5
-rw-r--r--include/configs/walnut.h6
-rw-r--r--include/configs/yosemite.h13
-rw-r--r--include/configs/yucca.h4
11 files changed, 52 insertions, 10 deletions
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 4ea040bc228..2f0df8ad2d0 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -291,6 +291,7 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_HAS_ETH0
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
#define CONFIG_PHY1_ADDR 1
@@ -426,4 +427,9 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index 784e7c0f8b3..cbd74a0d8db 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -128,6 +128,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_PHY1_ADDR 2 /* EMAC1 PHY address */
#define CONFIG_NET_MULTI 1
@@ -435,4 +436,8 @@
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 88fd7caa7a3..ba68fd4b967 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -201,6 +201,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 8 /* PHY address */
+#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_PHY1_ADDR 9 /* EMAC1 PHY address */
#define CONFIG_NET_MULTI 1
@@ -306,4 +307,9 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index d2f6b1021a3..cce883fd85f 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -79,7 +79,7 @@
#define CFG_ACE_BASE 0xfe000000 /* Xilinx ACE controller - Compact Flash */
#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_LEN + 1)
+#define CFG_MONITOR_LEN (0xFFFFFFFF - CFG_MONITOR_BASE + 1)
#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */
/*-----------------------------------------------------------------------
diff --git a/include/configs/luan.h b/include/configs/luan.h
index af237d9be0b..37151d31fdd 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -195,6 +195,7 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_HAS_ETH0
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 1
#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
@@ -306,4 +307,8 @@
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index 5a6eb4a37d4..be2b3ec7efd 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -330,4 +330,9 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/taihu.h b/include/configs/taihu.h
index 7db973676ba..8a1ff1acba4 100644
--- a/include/configs/taihu.h
+++ b/include/configs/taihu.h
@@ -114,6 +114,7 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0x14 /* PHY address */
+#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_PHY1_ADDR 0x10 /* EMAC1 PHY address */
#define CONFIG_NET_MULTI 1
@@ -433,4 +434,8 @@ unsigned char spi_read(void);
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/taishan.h b/include/configs/taishan.h
index 851a7ad40ae..1879d385220 100644
--- a/include/configs/taishan.h
+++ b/include/configs/taishan.h
@@ -331,4 +331,9 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index f6e99aca777..adc420b9ade 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -92,6 +92,7 @@
#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
+#define CONFIG_HAS_ETH0 1
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_NET_MULTI /* needed for NetConsole */
@@ -346,4 +347,9 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 3bd115a38d9..f22e79824cd 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -139,15 +139,6 @@
#define CFG_KBYTES_SDRAM (128 * 1024) /* 128MB */
#define CFG_SDRAM_BANKS (2)
-
-/*-----------------------------------------------------------------------
- * Device tree support (Linux-2.6.26+)
- *----------------------------------------------------------------------*/
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
@@ -392,4 +383,8 @@
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 1e3571eb4dc..6f9d3e3c6f3 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -541,4 +541,8 @@
/*---------------------------------------------------------------------------*/
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 23:06:20 +0000