ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

6 files changed, 9 insertions, 9 deletions

diff --git a/include/configs/aria.h b/include/configs/aria.h
index f89fc570aa5..06763c5d966 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -190,7 +190,7 @@
 
 /*
  * Backward compatible definitions,
- * so we do not have to change cpu/mpc512x/fixed_sdram.c
+ * so we do not have to change arch/ppc/cpu/mpc512x/fixed_sdram.c
  */
 #define	CONFIG_SYS_DDRCMD_EM2		(CONFIG_SYS_MICRON_EMR2)
 #define CONFIG_SYS_DDRCMD_EM3		(CONFIG_SYS_MICRON_EMR3)
diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index 4be28b26a65..44669ea44d3 100644
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -141,7 +141,7 @@
 
 #define CONFIG_SYS_FLASH_BASE		0xfe000000
 /*
- * The flash size is autoconfigured, but cpu/mpc5xxx/cpu_init.c needs this
+ * The flash size is autoconfigured, but arch/ppc/cpu/mpc5xxx/cpu_init.c needs this
  * variable defined
  */
 #define CONFIG_SYS_FLASH_SIZE		0x02000000
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index a79feec16df..e5537da4af0 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -230,7 +230,7 @@
  *       SDRAM Controller DDR autocalibration values and takes a lot longer
  *       to run than Method_B.
  * (See the Method_A and Method_B algorithm discription in the file:
- *	cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
+ *	arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
  * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
  *
  * DDR Autocalibration Method_B is the default.
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
index 16b464cf6da..3958d09eb93 100644
--- a/include/configs/linkstation.h
+++ b/include/configs/linkstation.h
@@ -290,7 +290,7 @@
  * taken from the orignal Linkstation boot code
  *
  * Most of the low level configuration setttings are normally used
- * in cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
+ * in arch/ppc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
  * Low level initialisation is done in board/linkstation/early_init.S
  * The values below are included for reference purpose only
  */
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 403837e14b0..2472187520a 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -233,7 +233,7 @@
  * Definitions for initial stack pointer and data area (in data cache)
  */
 /* use on chip memory (OCM) for temperary stack until sdram is tested */
-/* see ./cpu/ppc4xx/start.S */
+/* see ./arch/ppc/cpu/ppc4xx/start.S */
 #define CONFIG_SYS_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
@@ -251,7 +251,7 @@
  * Taken from PPCBoot board/icecube/icecube.h
  */
 
-/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
+/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
 #define CONFIG_SYS_EBC_PB0AP		0x04002480
 /* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
 #define CONFIG_SYS_EBC_PB0CR		0xFFC5A000
@@ -269,7 +269,7 @@
  *
  * Taken in part from PPCBoot board/icecube/icecube.h
  */
-/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
+/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
 #define CONFIG_SYS_GPIO0_OSRH		0x55555550
 #define CONFIG_SYS_GPIO0_OSRL		0x00000110
 #define CONFIG_SYS_GPIO0_ISR1H		0x00000000
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index d00f2480cb6..7423663a26e 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -456,7 +456,7 @@
  * - internal SRAM (OCM=On Chip Memory) is placed to CONFIG_SYS_OCM_DATA_ADDR
  * - Stackpointer will be located to
  *   (CONFIG_SYS_INIT_RAM_ADDR&0xFFFF0000) | (CONFIG_SYS_INIT_SP_OFFSET&0x0000FFFF)
- *   in cpu/ppc4xx/start.S
+ *   in arch/ppc/cpu/ppc4xx/start.S
  */
 
 #undef CONFIG_SYS_INIT_DCACHE_CS
@@ -495,7 +495,7 @@
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
 /* ################################################################################### */
-/* These defines will be used in cpu/ppc4xx/cpu_init.c to setup external chip selects  */
+/* These defines will be used in arch/ppc/cpu/ppc4xx/cpu_init.c to setup external chip selects  */
 /* They are currently undefined cause they are initiaized in board/solidcard3/init.S   */
 
 /* This chip select accesses the boot device */