Added initial eNET board support

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

1 files changed, 249 insertions, 0 deletions

diff --git a/include/configs/eNET.h b/include/configs/eNET.h
new file mode 100644
index 00000000000..87d2908a3b0
--- /dev/null
+++ b/include/configs/eNET.h
@@ -0,0 +1,249 @@
+/*
+ * (C) Copyright 2008
+ * Graeme Russ, graeme.russ@gmail.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Stuff still to be dealt with -
+ */
+#define CONFIG_RTC_MC146818
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define DEBUG_PARSER
+
+#define CONFIG_X86			1	/* Intel X86 CPU */
+#define CONFIG_SC520			1	/* AMD SC520 */
+#define CONFIG_SC520_SSI
+#define CONFIG_SHOW_BOOT_PROGRESS	1
+#define CONFIG_LAST_STAGE_INIT		1
+
+/*
+ * If CONFIG_HW_WATCHDOG is not defined, the watchdog jumper on the
+ * bottom (processor) board MUST be removed!
+ */
+#undef CONFIG_WATCHDOG
+#undef CONFIG_HW_WATCHDOG
+
+ /*-----------------------------------------------------------------------
+  * Video Configuration
+  */
+#undef CONFIG_VIDEO			/* No Video Hardware */
+#undef CONFIG_CFB_CONSOLE
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_MALLOC_SIZE	(CONFIG_SYS_ENV_SIZE + 128*1024)
+
+#define CONFIG_BAUDRATE		9600
+
+/*-----------------------------------------------------------------------
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support		*/
+#define CONFIG_CMD_BDI		/* bdinfo			*/
+#define CONFIG_CMD_BOOTD	/* bootd			*/
+#define CONFIG_CMD_CONSOLE	/* coninfo			*/
+#define CONFIG_CMD_ECHO		/* echo arguments		*/
+#define CONFIG_CMD_ENV		/* saveenv			*/
+#define CONFIG_CMD_FLASH	/* flinfo, erase, protect	*/
+#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#define CONFIG_CMD_IMI		/* iminfo			*/
+#define CONFIG_CMD_IMLS		/* List all found images	*/
+#define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
+#define CONFIG_CMD_LOADB	/* loadb			*/
+#define CONFIG_CMD_LOADS	/* loads			*/
+#define CONFIG_CMD_MEMORY	/* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MISC		/* Misc functions like sleep etc*/
+#undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#undef CONFIG_CMD_NFS		/* NFS support			*/
+#define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
+#undef CONFIG_CMD_IRQ		/* IRQ Information		*/
+
+#define CONFIG_BOOTDELAY		15
+#define CONFIG_BOOTARGS			"root=/dev/mtdblock0 console=ttyS0,9600"
+/* #define CONFIG_BOOTCOMMAND		"bootm 38000000" */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE		115200		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX		2		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"boot > "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					 sizeof(CONFIG_SYS_PROMPT) + \
+					 16)		/* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01000000	/* 1 ... 16 MB in DRAM	*/
+
+#undef  CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CONFIG_SYS_HZ			1024		/* incrementer freq: 1kHz */
+
+						/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * SDRAM Configuration
+ */
+#define CONFIG_SYS_SDRAM_DRCTMCTL	0x18
+#define CONFIG_NR_DRAM_BANKS		4
+
+/* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/
+#undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY
+#undef CONFIG_SYS_SDRAM_REFRESH_RATE
+#undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY
+#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
+#undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
+
+/*-----------------------------------------------------------------------
+ * CPU Features
+ */
+#define CONFIG_SYS_SC520_HIGH_SPEED	0	/* 100 or 133MHz */
+#define CONFIG_SYS_RESET_GENERIC		/* use triple-fault to reset cpu */
+#undef  CONFIG_SYS_RESET_SC520			/* use SC520 MMCR's to reset cpu */
+#define CONFIG_SYS_TIMER_SC520			/* use SC520 swtimers */
+#undef  CONFIG_SYS_TIMER_GENERIC		/* use the i8254 PIT timers */
+#undef  CONFIG_SYS_TIMER_TSC			/* use the Pentium TSC timers */
+#define CONFIG_SYS_USE_SIO_UART		0       /* prefer the uarts on the SIO to those
+					 * in the SC520 on the CDP */
+
+/*-----------------------------------------------------------------------
+ * Memory organization
+ */
+#define CONFIG_SYS_STACK_SIZE		0x8000  	/* Size of bootloader stack */
+#define CONFIG_SYS_BL_START_FLASH	0x38040000	/* Address of relocated code */
+#define CONFIG_SYS_BL_START_RAM		0x03fd0000	/* Address of relocated code */
+#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon	*/
+#define CONFIG_SYS_FLASH_BASE		0x38000000	/* Boot Flash */
+#define CONFIG_SYS_FLASH_BASE_1		0x10000000	/* StrataFlash 1 */
+#define CONFIG_SYS_FLASH_BASE_2		0x11000000	/* StrataFlash 2 */
+
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+ /*-----------------------------------------------------------------------
+  * FLASH configuration
+  */
+#define CONFIG_FLASH_CFI_DRIVER				/* Use the common driver */
+#define CONFIG_FLASH_CFI_LEGACY
+#define CONFIG_SYS_FLASH_CFI				/* Flash is CFI conformant */
+#define CONFIG_SYS_MAX_FLASH_BANKS	3	/* max number of memory banks */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE,   \
+					 CONFIG_SYS_FLASH_BASE_1, \
+					 CONFIG_SYS_FLASH_BASE_2}
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#define CONFIG_SYS_FLASH_LEGACY_512Kx8
+
+ /*-----------------------------------------------------------------------
+  * Environment configuration
+  */
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_OFFSET		0x20000 /*   Offset   of Environment Sector */
+#define CONFIG_ENV_SIZE			0x08000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE		0x20000 /* Total Size of Environment Sector */
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE_1 + \
+					 CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
+					 CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
+
+
+ /*-----------------------------------------------------------------------
+  * PCI configuration
+  */
+#undef CONFIG_PCI                                /* include pci support */
+#undef CONFIG_PCI_PNP                            /* pci plug-and-play */
+#undef CONFIG_PCI_SCAN_SHOW
+#undef CONFIG_SYS_FIRST_PCI_IRQ
+#undef CONFIG_SYS_SECOND_PCI_IRQ
+#undef CONFIG_SYS_THIRD_PCI_IRQ
+#undef CONFIG_SYS_FORTH_PCI_IRQ
+
+/*-----------------------------------------------------------------------
+ * Hardware watchdog configuration
+ */
+#define CONFIG_SYS_WATCHDOG_PIO_BIT  		0x8000
+#define CONFIG_SYS_WATCHDIG_PIO_DATA 		SC520_PIODATA15_0
+#define CONFIG_SYS_WATCHDIG_PIO_CLR  		SC520_PIOCLR15_0
+#define CONFIG_SYS_WATCHDIG_PIO_SET  		SC520_PIOSET15_0
+
+/*-----------------------------------------------------------------------
+ * FPGA configuration
+ */
+#define CONFIG_SYS_FPGA_PROGRAM_PIO_BIT		0x2000
+#define CONFIG_SYS_FPGA_INIT_PIO_BIT		0x4000
+#define CONFIG_SYS_FPGA_DONE_PIO_BIT		0x8000
+#define CONFIG_SYS_FPGA_PIO_DATA 		SC520_PIODATA31_16
+#define CONFIG_SYS_FPGA_PIO_DIRECTION 		SC520_PIODIR31_16
+#define CONFIG_SYS_FPGA_PIO_CLR  		SC520_PIOCLR31_16
+#define CONFIG_SYS_FPGA_PIO_SET  		SC520_PIOSET31_16
+#define CONFIG_SYS_FPGA_PROGRAM_BIT_DROP_TIME	1	/* milliseconds */
+#define CONFIG_SYS_FPGA_MAX_INIT_TIME		10	/* milliseconds */
+#define CONFIG_SYS_FPGA_MAX_FINALISE_TIME	10	/* milliseconds */
+#define CONFIG_SYS_FPGA_SSI_DATA_RATE		8333	/* kHz (33.3333MHz xtal) */
+
+#ifndef __ASSEMBLER__
+extern unsigned long ip;
+
+#define PRINTIP				asm ("call next_line\n" \
+					    "next_line:\n" \
+					    "pop %%eax\n" \
+					    "movl %%eax, %0\n" \
+					    :"=r"(ip) \
+					    : /* No Input Registers */ \
+					    :"%eax"); \
+					    printf("IP: 0x%08lx (File: %s, Line: %d)\n", ip, __FILE__, __LINE__);
+
+#endif
+#endif	/* __CONFIG_H */