* Fix problems caused by Robert Schwebel's cramfs patch

* Patch by Scott McNutt, 02 Jan 2004:
  Add support for the Nios Active Serial Memory Interface (ASMI)
  on Cyclone devices

* Patch by Andrea Marson, 16 Dec 2003:
  Add support for the PPChameleon ME and HI modules

* Patch by Yuli Barcohen, 22 Dec 2003:
  Add support for Motorola DUET ADS board (MPC87x/88x)

17 files changed, 286 insertions, 1230 deletions

diff --git a/include/asm-ppc/8xx_immap.h b/include/asm-ppc/8xx_immap.h
index 53559c01e83..469edb34f1c 100644
--- a/include/asm-ppc/8xx_immap.h
+++ b/include/asm-ppc/8xx_immap.h
@@ -435,7 +435,19 @@ typedef struct comm_proc {
 	u_char	res13[2];
 	ushort	cp_pbodr;
 	uint	cp_pbdat;
-	u_char	res14[0x18];
+
+	/* Port E - MPC87x/88x only.
+	 */
+	uint	cp_pedir;
+	uint	cp_pepar;
+	uint	cp_peso;
+	uint	cp_peodr;
+	uint	cp_pedat;
+
+	/* Communications Processor Timing Register -
+	   Contains RMII Timing for the FECs on MPC87x/88x only.
+	*/
+	uint	cp_cptr;
 
 	/* Serial Interface and Time Slot Assignment.
 	*/
diff --git a/include/bmp_logo.h b/include/bmp_logo.h
index 9c924b8592d..265f744d0e3 100644
--- a/include/bmp_logo.h
+++ b/include/bmp_logo.h
@@ -18,7 +18,7 @@ unsigned short bmp_logo_palette[] = {
 	0x0343,  0x0454,  0x0565,  0x0565,  0x0676,  0x0787,  0x0898,  0x0999,
 	0x0AAA,  0x0ABA,  0x0BCB,  0x0CCC,  0x0DDD,  0x0EEE,  0x0FFF,  0x0FB3,
 	0x0FB4,  0x0FC4,  0x0FC5,  0x0FC6,  0x0FD7,  0x0FD8,  0x0FD9,  0x0FDA,
-	0x0FEA,  0x0FEB,  0x0FEC,  0x0FFD,  0x0FFE,  0x0FFF,  0x0FFF,
+	0x0FEA,  0x0FEB,  0x0FEC,  0x0FFD,  0x0FFE,  0x0FFF,  0x0FFF,  
 };
 
 unsigned char bmp_logo_bitmap[] = {
diff --git a/include/common.h b/include/common.h
index 6b92548243e..32107a0942e 100644
--- a/include/common.h
+++ b/include/common.h
@@ -12,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -29,7 +29,7 @@
 
 typedef unsigned char		uchar;
 typedef volatile unsigned long	vu_long;
-typedef volatile unsigned short	vu_short;
+typedef volatile unsigned short vu_short;
 typedef volatile unsigned char	vu_char;
 
 #include <config.h>
@@ -41,21 +41,25 @@ typedef volatile unsigned char	vu_char;
 #if defined(CONFIG_PCI) && defined(CONFIG_440)
 #include <pci.h>
 #endif
-#ifdef	CONFIG_8xx
+#if defined(CONFIG_8xx)
 #include <asm/8xx_immap.h>
-#ifdef CONFIG_MPC860
-#define CONFIG_MPC86x 1
-#endif
-#ifdef CONFIG_MPC860T
-#define CONFIG_MPC86x 1
-#endif
 #if defined(CONFIG_MPC852)	|| defined(CONFIG_MPC852T)	|| \
     defined(CONFIG_MPC859)	|| defined(CONFIG_MPC859T)	|| \
     defined(CONFIG_MPC859DSL)	|| \
     defined(CONFIG_MPC866)	|| defined(CONFIG_MPC866T)	|| \
     defined(CONFIG_MPC866P)
-#define CONFIG_MPC866_et_al 1
-#define CONFIG_MPC86x 1
+# define CONFIG_MPC866_et_al 1
+#elif defined(CONFIG_MPC870) \
+   || defined(CONFIG_MPC875) \
+   || defined(CONFIG_MPC880) \
+   || defined(CONFIG_MPC885)
+# define CONFIG_DUET   1
+#endif
+#if   defined(CONFIG_MPC860)	   \
+   || defined(CONFIG_MPC860T)	   \
+   || defined(CONFIG_MPC866_et_al) \
+   || defined(CONFIG_DUET)
+# define CONFIG_MPC86x 1
 #endif
 #elif defined(CONFIG_5xx)
 #include <asm/5xx_immap.h>
diff --git a/include/commproc.h b/include/commproc.h
index 8bab5225c24..11f31e9da4d 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -716,13 +716,14 @@ typedef struct scc_enet {
 
 /***  FADS860T********************************************************/
 
-#if (defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al)) \
-    && defined(CONFIG_FADS)
-/* This ENET stuff is for the MPC860TFADS/MPC8xxADS with ethernet on SCC1.
+#if defined(CONFIG_FADS) && defined(CONFIG_MPC86x)
+/*
+ * This ENET stuff is for the MPC86xFADS/MPC8xxADS with ethernet on SCC1.
  */
 #ifdef CONFIG_SCC1_ENET
+
 #define	SCC_ENET	0
-#endif	/* CONFIG_SCC1_ETHERNET */
+
 #define	PROFF_ENET	PROFF_SCC1
 #define	CPM_CR_ENET	CPM_CR_CH_SCC1
 
@@ -739,14 +740,17 @@ typedef struct scc_enet {
 #define SICR_ENET_MASK	((uint)0x000000ff)
 #define SICR_ENET_CLKRT	((uint)0x0000002c)
 
-/* This ENET stuff is for the MPC860TFADS with ethernet on FEC.
+#endif	/* CONFIG_SCC1_ETHERNET */
+
+/*
+ * This ENET stuff is for the MPC860TFADS/MPC86xADS/DUET with ethernet on FEC.
  */
 
 #ifdef CONFIG_FEC_ENET
-#define	FEC_ENET	/* use FEC for EThernet */
-#endif	/* CONFIG_FEC_ETHERNET */
+#define	FEC_ENET	/* Use FEC for Ethernet */
+#endif	/* CONFIG_FEC_ENET */
 
-#endif	/* CONFIG_FADS860T */
+#endif	/* CONFIG_FADS && CONFIG_MPC86x */
 
 /***  FPS850L, FPS860L  ************************************************/
 
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h
index 1b037c9b11b..916272dce10 100644
--- a/include/configs/ADS860.h
+++ b/include/configs/ADS860.h
@@ -5,17 +5,14 @@
   * Helmut Buchsbaum added bitvalues for BCSRx
   *
   * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+  *
+  * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
+  *
+  * Values common to all FADS family boards are in board/fads/fads.h
   */
 
-/* ------------------------------------------------------------------------- */
-
-#ifndef _CONFIG_ADS860_H
-#define _CONFIG_ADS860_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
+#ifndef __CONFIG_H
+#define __CONFIG_H
 
 /* Board type */
 #define CONFIG_ADS		1	/* Old Motorola MPC821/860ADS */
@@ -38,351 +35,20 @@
 #define CFG_8XX_FACT		12	/* Multiply by 12 */
 #endif
 
-#define CONFIG_8xx_GCLK_FREQ   ((CFG_8XX_XIN) * (CFG_8XX_FACT))
-
-#define CONFIG_DRAM_50MHZ	1
-
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled	    */
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-#endif
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND						\
-   "dhcp;"								\
-   "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "	\
-   "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;"	\
-   "bootm"
-
-#define CONFIG_LOADS_ECHO	1   /* echo on for serial download  */
-#undef	CFG_LOADS_BAUD_CHANGE	    /* don't allow baudrate change  */
-
-#undef	CONFIG_WATCHDOG		    /* watchdog disabled	*/
-
-#define CONFIG_BOOTP_MASK   (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL  \
-			 | CFG_CMD_DHCP  \
-			 | CFG_CMD_IMMAP \
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL   \
+			 | CFG_CMD_DHCP   \
+			 | CFG_CMD_IMMAP  \
 			 | CFG_CMD_PCMCIA \
-			 | CFG_CMD_PING  \
+			 | CFG_CMD_PING   \
 			)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-/*
- * Miscellaneous configurable options
- */
-#undef	CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT	    "=>"	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE	    1024	/* Console I/O Buffer Size  */
-#else
-#define CFG_CBSIZE	    256		/* Console I/O Buffer Size  */
-#endif
-#define CFG_PBSIZE	    (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	    16		/* max number of command args	*/
-#define CFG_BARGSIZE	    CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CFG_MEMTEST_START   0x00100000	/* memtest works on */
-#define CFG_MEMTEST_END	    0x00F00000	/* 1 ... 15 MB in DRAM	*/
+#define CONFIG_DRAM_50MHZ		1
 
-#define CFG_LOAD_ADDR	    0x00100000
+#include "fads.h"
 
-#define CFG_HZ		    1000	/* decrementer freq: 1 ms ticks */
-
-#define CFG_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CFG_IMMR		0xFF000000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- */
-#define CFG_SDRAM_BASE	    0x00000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CFG_FLASH_BASE	    TEXT_BASE
-#define CFG_FLASH_SIZE	    ((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
-
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	    */
-#define CFG_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
-
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)  */
-
-#undef	CFG_ENV_IS_IN_NVRAM
-#undef	CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_IS_IN_FLASH	1
-
-#define CFG_ENV_SECT_SIZE	0x40000 /* see README - env sector total size	*/
-#define CFG_ENV_OFFSET		CFG_ENV_SECT_SIZE
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment */
-
-#define CFG_MONITOR_BASE    CFG_FLASH_BASE
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve one flash sector
-					   (256 KB) for monitor */
-#define CFG_MALLOC_LEN	    (384 << 10) /* Reserve 384 kB for malloc()	*/
-
-/* the other CS:s are determined by looking at parameters in BCSRx */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_CACHELINE_SIZE  16		/* For all MPC8xx CPUs		*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 4		/* log base 2 of the above value    */
-#endif
-
-/*-----------------------------------------------------------------------
- * I2C configuration
- */
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address defaults */
-#define CFG_I2C_SLAVE		0x7F
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control			11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR   (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-	     SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
-#else
-#define CFG_SYPCR   (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SUMCR - SIU Module Configuration			11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CFG_SIUMCR  (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control			11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CFG_TBSCR   (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control	11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CFG_PISCR   (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
- */
 #define CFG_PLPRCR  (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
 		PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register	15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK   SCCR_EBDF11
-#define CFG_SCCR    (SCCR_TBS | SCCR_COM00 | SCCR_DFSYNC00 | \
-		   SCCR_DFBRG00 | SCCR_DFNL000 | SCCR_DFNH000 | \
-		   SCCR_DFLCD000 | SCCR_DFALCD00)
-
-
- /*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CFG_DER	    0
-
-/* Because of the way the 860 starts up and assigns CS0 the
-* entire address space, we have to set the memory controller
-* differently.	Normally, you write the option register
-* first, and then enable the chip select by writing the
-* base register.  For CS0, you must write the base register
-* first, followed by the option register.
-*/
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- * BR1 and OR1 (BCSR)
- */
-/* the other CS:s are determined by looking at parameters in BCSRx */
-
-#define BCSR_ADDR	   ((uint) 0xff010000)
-
-#define CFG_PRELIM_OR_AM    0xff800000	/* OR addr mask */
-
-/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0    */
-#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
-
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)   /* 8 Mbyte until detected */
-#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | BR_V)
-
-/* BCSRx - Board Control and Status Registers */
-#define CFG_OR1_PRELIM	0xffff8110	/* 64Kbyte address space */
-#define CFG_BR1_PRELIM	((BCSR_ADDR) | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CFG_MPTPR_2BK_4K    MPTPR_PTP_DIV16	/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_4K    MPTPR_PTP_DIV32	/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit	    */
-#define CFG_MPTPR_2BK_8K    MPTPR_PTP_DIV8	/* setting for 2 banks	*/
-#define CFG_MPTPR_1BK_8K    MPTPR_PTP_DIV16	/* setting for 1 bank	*/
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	    /* Software reboot		*/
-
-
-/* values according to the manual */
-#define BCSR0	(BCSR_ADDR + 0x00)
-#define BCSR1	(BCSR_ADDR + 0x04)
-#define BCSR2	(BCSR_ADDR + 0x08)
-#define BCSR3	(BCSR_ADDR + 0x0c)
-
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#ifdef CONFIG_MPC860
-#define PCMCIA_SLOT_A 1
-#endif
-
-#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_IDE_8xx_DIRECT	1   /* PCMCIA interface required    */
-#undef	CONFIG_IDE_LED		    /* LED   for ide supported	*/
-#define CONFIG_IDE_RESET	1   /* reset for ide supported	*/
-
-#define CFG_IDE_MAXBUS		1   /* max. 2 IDE busses	*/
-#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
-
-#define CFG_PIO_MODE		0   /* IDE interface in PIO Mode 0  */
 #define CFG_PC_IDE_RESET	((ushort)0x0008)    /* PC 12	*/
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
-#define CFG_ATA_IDE0_OFFSET	0x0000
-
-#define CFG_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O		*/
-#define CFG_ATA_REG_OFFSET	0x0080	/* Offset for normal register accesses	*/
-#define CFG_ATA_ALT_OFFSET	0x0100	/* Offset for alternate registers   */
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-#undef CONFIG_DISK_SPINUP_TIME	/* usinī Compact Flash */
-
-/* (F)ADS bitvalues by Helmut Buchsbaum
- * see MPC8xxADS User's Manual for a proper description
- * of the following structures
- */
-
-#define BCSR0_ERB	((uint)0x80000000)
-#define BCSR0_IP	((uint)0x40000000)
-#define BCSR0_BDIS	((uint)0x10000000)
-#define BCSR0_BPS_MASK	((uint)0x0C000000)
-#define BCSR0_ISB_MASK	((uint)0x01800000)
-#define BCSR0_DBGC_MASK ((uint)0x00600000)
-#define BCSR0_DBPC_MASK ((uint)0x00180000)
-#define BCSR0_EBDF_MASK ((uint)0x00060000)
-
-#define BCSR1_FLASH_EN		 ((uint)0x80000000)
-#define BCSR1_DRAM_EN		 ((uint)0x40000000)
-#define BCSR1_ETHEN		 ((uint)0x20000000)
-#define BCSR1_IRDEN		 ((uint)0x10000000)
-#define BCSR1_FLASH_CFG_EN	 ((uint)0x08000000)
-#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
-#define BCSR1_BCSR_EN		 ((uint)0x02000000)
-#define BCSR1_RS232EN_1		 ((uint)0x01000000)
-#define BCSR1_PCCEN		 ((uint)0x00800000)
-#define BCSR1_PCCVCC0		 ((uint)0x00400000)
-#define BCSR1_PCCVCCON		    BCSR1_PCCVCC0
-#define BCSR1_PCCVPP_MASK	 ((uint)0x00300000)
-#define BCSR1_DRAM_HALF_WORD	 ((uint)0x00080000)
-#define BCSR1_RS232EN_2		 ((uint)0x00040000)
-#define BCSR1_SDRAM_EN		 ((uint)0x00020000)
-#define BCSR1_PCCVCC1		 ((uint)0x00010000)
-
-#define BCSR2_FLASH_PD_MASK	 ((uint)0xF0000000)
-#define BCSR2_DRAM_PD_MASK	 ((uint)0x07800000)
-#define BCSR2_DRAM_PD_SHIFT	 (23)
-#define BCSR2_EXTTOLI_MASK	 ((uint)0x00780000)
-#define BCSR2_DBREVNR_MASK	 ((uint)0x00030000)
-
-#define BCSR3_DBID_MASK		 ((ushort)0x3800)
-#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
-#define BCSR3_BREVNR0		 ((ushort)0x0080)
-#define BCSR3_FLASH_PD_MASK	 ((ushort)0x0070)
-#define BCSR3_BREVN1		 ((ushort)0x0008)
-#define BCSR3_BREVN2_MASK	 ((ushort)0x0003)
-
-/* We don't use the 8259.
- */
-#define NR_8259_INTS	0
-
-/* Machine type
- */
-#define _MACH_8xx (_MACH_ads)
-
-#endif	/* _CONFIG_ADS860_H */
+#endif	/* __CONFIG_H */
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index 2b0b176e241..0d8e4631b37 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -413,7 +413,7 @@
 #endif
 
 /*------------------------------------------------------------------------
- * Ethernet -- needs work!
+ * Ethernet
  *----------------------------------------------------------------------*/
 #if	(CFG_NIOS_CPU_LAN_NUMS == 1)
 
@@ -642,6 +642,15 @@
 #endif	/* CFG_NIOS_CPU_PIO_NUMS */
 
 /*------------------------------------------------------------------------
+ * ASMI - Active Serial Memory Interface.
+ *
+ * ASMI is for Cyclone devices only and only works when the configuration
+ * is loaded via JTAG or ASMI. Please see doc/README.dk1c20 for details.
+ *----------------------------------------------------------------------*/
+#define CONFIG_NIOS_ASMI			/* Enable ASMI		*/
+#define CFG_NIOS_ASMIBASE	0x00920b00	/* ASMI base address	*/
+
+/*------------------------------------------------------------------------
  * COMMANDS
  *----------------------------------------------------------------------*/
 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
diff --git a/include/configs/DUET_ADS.h b/include/configs/DUET_ADS.h
new file mode 100644
index 00000000000..8a4025797db
--- /dev/null
+++ b/include/configs/DUET_ADS.h
@@ -0,0 +1,53 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the Motorola DUET ADS board. Values common to all FADS family boards
+ * are in board/fads/fads.h
+ *
+ * Copyright (C) 2003 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Board type */
+#define CONFIG_DUET_ADS	        1	/* Duet (MPC87x/88x) ADS */
+#define CONFIG_FADS		1	/* We are FADS compatible (more or less) */
+
+#define CONFIG_MPC885 		1	/* MPC885 CPU (Duet family) */
+
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#undef	CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE		38400
+
+#define CFG_8XX_FACT		5		/* Multiply by 5	*/
+#define CFG_8XX_XIN		10000000	/* 10 MHz in	*/
+
+#define CONFIG_SDRAM_50MHZ      1
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		14-22
+ *-----------------------------------------------------------------------
+ * set the PLL, the low-power modes and the reset control
+ */
+#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS)
+
+#include "fads.h"
+
+#define CFG_PHYDEV_ADDR		(BCSR_ADDR + 0x20000)
+
+#define CFG_OR5_PRELIM		0xFFFF8110	/* 64Kbyte address space */
+#define CFG_BR5_PRELIM		(CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
+
+#define BCSR5			(CFG_PHYDEV_ADDR + 0x300)
+
+#define BCSR5_MII2_EN		0x40
+#define BCSR5_MII2_RST		0x20
+#define BCSR5_T1_RST		0x10
+#define BCSR5_ATM155_RST	0x08
+#define BCSR5_ATM25_RST		0x04
+#define BCSR5_MII1_EN		0x02
+#define BCSR5_MII1_RST		0x01
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index 3b201a79108..4f3d3977a87 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -66,8 +66,6 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#include <mpc8xx_irq.h>
-
 #define CONFIG_MPC823		1
 #define CONFIG_MPC823FADS	1
 #define CONFIG_FADS		1
@@ -433,14 +431,6 @@
 #define CONFIG_DRAM_50MHZ		1
 #define CONFIG_SDRAM_50MHZ
 
-#ifdef CONFIG_MPC860T
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-#endif /* CONFIG_MPC860T */
-
 /* We don't use the 8259.
 */
 #define NR_8259_INTS	0
@@ -468,4 +458,6 @@
 #define PCMCIA_SLOT_A 1
 #endif
 
+#define CFG_DAUGHTERBOARD
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index 3d04ef0dd97..9e292ae0eb3 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -30,8 +30,6 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#include <mpc8xx_irq.h>
-
 #define CONFIG_MPC850		1
 #define CONFIG_MPC850SAR	1
 #define CONFIG_FADS			1
@@ -393,14 +391,6 @@
 #define CONFIG_DRAM_50MHZ		1
 #define CONFIG_SDRAM_50MHZ
 
-#ifdef CONFIG_MPC860T
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-#endif /* CONFIG_MPC860T */
-
 /* We don't use the 8259.
 */
 #define NR_8259_INTS	0
@@ -420,4 +410,6 @@
 #define PCMCIA_SLOT_A 1
 #endif
 
+#define CFG_DAUGHTERBOARD
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h
index 114603c6270..e57571bf3ad 100644
--- a/include/configs/FADS860T.h
+++ b/include/configs/FADS860T.h
@@ -5,32 +5,15 @@
   * Helmut Buchsbaum added bitvalues for BCSRx
   *
   * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+  *
+  * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
+  *
+  * Values common to all FADS family boards are in board/fads/fads.h
   */
 
-/*
- * 1999-nov-26: The FADS is using the following physical memorymap:
- *
- * ff020000 -> ff02ffff : pcmcia
- * ff010000 -> ff01ffff : BCSR       connected to CS1, setup by 8xxrom
- * ff000000 -> ff00ffff : IMAP       internal in the cpu
- * fe000000 -> ffnnnnnn : flash      connected to CS0, setup by 8xxrom
- * 00000000 -> nnnnnnnn : sdram/dram setup by 8xxrom
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
 /* board type */
 #define CONFIG_FADS		1       /* old/new FADS + new ADS */
 
@@ -51,403 +34,25 @@
 # define CFG_8XX_XIN		5000000		/* 5 MHz in	*/
 #endif
 
-#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
-
-/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
-/* in general, we always know this for FADS+new ADS anyway */
-#define CONFIG_8xx_GCLK_FREQ     MPC8XX_HZ
-
-#if 1
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND			    \
-    "bootp; "				    \
-    "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "	    \
-    "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; "   \
-    "bootm"
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/* ATA / IDE and partition support */
-#define CONFIG_MAC_PARTITION    1
-#define CONFIG_DOS_PARTITION    1
-#define CONFIG_ISO_PARTITION	1
-#undef	CONFIG_ATAPI
-#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
-#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-/* choose SCC1 ethernet (10BASET on motherboard)
- * or FEC ethernet (10/100 on daughterboard)
- */
-#if 0
-#define	CONFIG_SCC1_ENET	1	/* use SCC1 ethernet */
-#undef	CONFIG_FEC_ENET			/* disable FEC ethernet  */
-#else   /* all 86x cores have FECs, if in doubt, use it */
-#undef	CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
-#define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
-#define CFG_DISCOVER_PHY
-#endif
-#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
-#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
-#endif
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-/*
- * Miscellaneous configurable options
- */
-#undef	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=>"	/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#if (CFG_SDRAM_SIZE)
-#define CFG_MEMTEST_END		CFG_SDRAM_SIZE	/* 1 ... SDRAM_SIZE	*/
-#else
-#define CFG_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
-#endif
-
-#define CFG_LOAD_ADDR	 	0x00100000
-
-#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CFG_IMMR			0xFF000000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- */
-#define	CFG_SDRAM_BASE		0x00000000
-#ifdef CONFIG_FADS
-# define	CFG_SDRAM_SIZE	0x00400000      /* 4 meg */
-#else   /* !CONFIG_FADS */ /* old ADS */
-# define	CFG_SDRAM_SIZE	0x00000000      /* NO SDRAM */
-#endif
-
-#define CFG_FLASH_BASE		TEXT_BASE
-
-#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
-
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	16      /* max number of sectors on one chip	*/
-
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00040000
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-
-#define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sector total size	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control					11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration					11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control					11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
- */
-#define CFG_PLPRCR	(((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
-				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
-
- /*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CFG_DER		 0
-
-/* Because of the way the 860 starts up and assigns CS0 the
-* entire address space, we have to set the memory controller
-* differently.  Normally, you write the option register
-* first, and then enable the chip select by writing the
-* base register.  For CS0, you must write the base register
-* first, followed by the option register.
-*/
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-/* the other CS:s are determined by looking at parameters in BCSRx */
-
-#define BCSR_ADDR		((uint) 0xFF010000)
-#define BCSR_SIZE		((uint)(64 * 1024))
+#define CONFIG_DRAM_50MHZ		1
+#define CONFIG_SDRAM_50MHZ              1
 
-#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
+#include "fads.h"
 
-/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+#define CFG_PLPRCR	(((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
+			 PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 
 #ifdef USE_REAL_FLASH_VALUES
 /*
  * These values fit our FADS860T ...
  * The "default" behaviour with 1Mbyte initial doesn't work for us!
  */
+#undef CFG_OR0_PRELIM
+#undef CFG_BR0_PRELIM
 #define CFG_OR0_PRELIM	0x0FFC00D34 /* Real values for the board */
 #define CFG_BR0_PRELIM	0x02800001  /* Real values for the board */
-#else
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)   /* 8 Mbyte until detected */
-#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
-#endif
-
-/* BCSRx - Board Control and Status Registers */
-#define CFG_OR1_PRELIM	0xffff8110		/* 64Kbyte address space */
-#define CFG_BR1_PRELIM	((BCSR_ADDR) | BR_V )
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-
-/* values according to the manual */
-
-
-#define PCMCIA_MEM_ADDR		((uint)0xff020000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-
-#define	BCSR0			((uint) (BCSR_ADDR + 0x00))
-#define	BCSR1			((uint) (BCSR_ADDR + 0x04))
-#define	BCSR2			((uint) (BCSR_ADDR + 0x08))
-#define	BCSR3			((uint) (BCSR_ADDR + 0x0c))
-#define	BCSR4			((uint) (BCSR_ADDR + 0x10))
-
-/* FADS bitvalues by Helmut Buchsbaum
- * see MPC8xxADS User's Manual for a proper description
- * of the following structures
- */
-
-#define BCSR0_ERB       ((uint)0x80000000)
-#define BCSR0_IP        ((uint)0x40000000)
-#define BCSR0_BDIS      ((uint)0x10000000)
-#define BCSR0_BPS_MASK  ((uint)0x0C000000)
-#define BCSR0_ISB_MASK  ((uint)0x01800000)
-#define BCSR0_DBGC_MASK ((uint)0x00600000)
-#define BCSR0_DBPC_MASK ((uint)0x00180000)
-#define BCSR0_EBDF_MASK ((uint)0x00060000)
-
-#define BCSR1_FLASH_EN           ((uint)0x80000000)
-#define BCSR1_DRAM_EN            ((uint)0x40000000)
-#define BCSR1_ETHEN              ((uint)0x20000000)
-#define BCSR1_IRDEN              ((uint)0x10000000)
-#define BCSR1_FLASH_CFG_EN       ((uint)0x08000000)
-#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
-#define BCSR1_BCSR_EN            ((uint)0x02000000)
-#define BCSR1_RS232EN_1          ((uint)0x01000000)
-#define BCSR1_PCCEN              ((uint)0x00800000)
-#define BCSR1_PCCVCC0            ((uint)0x00400000)
-#define BCSR1_PCCVPP_MASK        ((uint)0x00300000)
-#define BCSR1_DRAM_HALF_WORD     ((uint)0x00080000)
-#define BCSR1_RS232EN_2          ((uint)0x00040000)
-#define BCSR1_SDRAM_EN           ((uint)0x00020000)
-#define BCSR1_PCCVCC1            ((uint)0x00010000)
-
-#define BCSR2_FLASH_PD_MASK      ((uint)0xF0000000)
-#define BCSR2_DRAM_PD_MASK       ((uint)0x07800000)
-#define BCSR2_DRAM_PD_SHIFT      (23)
-#define BCSR2_EXTTOLI_MASK       ((uint)0x00780000)
-#define BCSR2_DBREVNR_MASK       ((uint)0x00030000)
-
-#define BCSR3_DBID_MASK          ((ushort)0x3800)
-#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
-#define BCSR3_BREVNR0            ((ushort)0x0080)
-#define BCSR3_FLASH_PD_MASK      ((ushort)0x0070)
-#define BCSR3_BREVN1             ((ushort)0x0008)
-#define BCSR3_BREVN2_MASK        ((ushort)0x0003)
-
-#define BCSR4_ETHLOOP            ((uint)0x80000000)
-#define BCSR4_TFPLDL             ((uint)0x40000000)
-#define BCSR4_TPSQEL             ((uint)0x20000000)
-#define BCSR4_SIGNAL_LAMP        ((uint)0x10000000)
-#ifdef CONFIG_MPC823
-#define BCSR4_USB_EN             ((uint)0x08000000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC860SAR
-#define BCSR4_UTOPIA_EN          ((uint)0x08000000)
-#endif /* CONFIG_MPC860SAR */
-#ifdef CONFIG_MPC860T
-#define BCSR4_FETH_EN            ((uint)0x08000000)
-#endif /* CONFIG_MPC860T */
-#ifdef CONFIG_MPC823
-#define BCSR4_USB_SPEED          ((uint)0x04000000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC860T
-#define BCSR4_FETHCFG0           ((uint)0x04000000)
-#endif /* CONFIG_MPC860T */
-#ifdef CONFIG_MPC823
-#define BCSR4_VCCO               ((uint)0x02000000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC860T
-#define BCSR4_FETHFDE            ((uint)0x02000000)
-#endif /* CONFIG_MPC860T */
-#ifdef CONFIG_MPC823
-#define BCSR4_VIDEO_ON           ((uint)0x00800000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC823
-#define BCSR4_VDO_EKT_CLK_EN     ((uint)0x00400000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC860T
-#define BCSR4_FETHCFG1           ((uint)0x00400000)
-#endif /* CONFIG_MPC860T */
-#ifdef CONFIG_MPC823
-#define BCSR4_VIDEO_RST          ((uint)0x00200000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC860T
-#define BCSR4_FETHRST            ((uint)0x00200000)
-#endif /* CONFIG_MPC860T */
-#ifdef CONFIG_MPC823
-#define BCSR4_MODEM_EN           ((uint)0x00100000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC823
-#define BCSR4_DATA_VOICE         ((uint)0x00080000)
-#endif /* CONFIG_MPC823 */
-#ifdef CONFIG_MPC850
-#define BCSR4_DATA_VOICE         ((uint)0x00080000)
-#endif /* CONFIG_MPC850 */
-
-#define CONFIG_DRAM_50MHZ		1
-#define CONFIG_SDRAM_50MHZ              1
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-/* Machine type
-*/
-#define _MACH_8xx (_MACH_fads)
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-
-/* PCMCIA configuration */
-
-#ifdef CONFIG_MPC860
-#define PCMCIA_SLOT_A 1
 #endif
-/*#define CFG_PCMCIA_MEM_SIZE     ( 64 << 20) */
-#define CFG_PCMCIA_MEM_ADDR	(0x50000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0x54000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0x58000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0x5C000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
-/* we have 8 windows, we take everything up to 60000000 */
-
-#define CFG_ATA_IDE0_OFFSET	0x0000
-
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
-/* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
-/* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0000
-/*#define CFG_ATA_ALT_OFFSET	0x0100 */
 
+#define CFG_DAUGHTERBOARD /* FADS has processor-specfic daughterboard */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
index 1eac6ef68fb..a6e26067142 100644
--- a/include/configs/MPC86xADS.h
+++ b/include/configs/MPC86xADS.h
@@ -3,24 +3,12 @@
   * the Motorola MPC8xxADS board.  Copied from the FADS config.
   *
   * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+  *
+  * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
+  *
+  * Values common to all FADS family boards are in board/fads/fads.h
   */
 
-/*
- * 1999-nov-26: The FADS is using the following physical memorymap:
- *
- * ff020000 -> ff02ffff : pcmcia
- * ff010000 -> ff01ffff : BCSR       connected to CS1
- * ff000000 -> ff00ffff : IMAP       internal in the cpu
- * fe000000 -> fennnnnn : flash      connected to CS0
- * 00000000 -> nnnnnnnn : sdram      connected to CS4
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
@@ -33,7 +21,7 @@
 #define CONFIG_MPC86xADS        1       /* new ADS */
 #define CONFIG_FADS		1       /* We are FADS compatible (more or less) */
 
-/* new 86xADS only - pick one of these */
+/* New MPC86xADS - pick one of these */
 #define CONFIG_MPC866T 		1
 #undef CONFIG_MPC866P
 #undef CONFIG_MPC859T
@@ -44,374 +32,20 @@
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
 #define CONFIG_BAUDRATE		38400
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 
-#ifdef CONFIG_MPC86xADS
 # define CFG_8XX_FACT		5		/* Multiply by 5	*/
 # define CFG_8XX_XIN		10000000	/* 10 MHz in	*/
-#else /* ! CONFIG_MPC86xADS */
-# if 0 /* old FADS */
-#  define CFG_8XX_FACT		12		/* Multiply by 12 */
-#  define CFG_8XX_XIN		4000000		/* 4 MHz in	*/
-# else /* new FADS */
-#  define CFG_8XX_FACT		10		/* Multiply by 10 */
-#  define CFG_8XX_XIN		5000000		/* 5 MHz in	*/
-# endif
-#endif /* ! CONFIG_MPC86xADS */
-
-#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
-
-/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
-/* in general, we always know this for FADS+new ADS anyway */
-#define CONFIG_8xx_GCLK_FREQ     MPC8XX_HZ
-
-#if 1
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-    "dhcp;"									\
-    "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "		\
-    "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;"	\
-    "bootm"
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
-/* ATA / IDE and partition support */
-#define CONFIG_MAC_PARTITION    1
-#define CONFIG_DOS_PARTITION    1
-#define CONFIG_ISO_PARTITION	1
-#undef	CONFIG_ATAPI
-#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
-#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-/*
- * New MPC86xADS provides two Ethernet connectivity options:
- * 10Mbit/s on SCC1 and 100Mbit/s on FEC. All new PQ1 chips
- * has got FEC so FEC is the default.
- */
-#undef	CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
-#define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
-#ifdef CONFIG_FEC_ENET
-#define CFG_DISCOVER_PHY
-#endif
-#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
-#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
-#endif
-
-#define CONFIG_COMMANDS	(CONFIG_CMD_DFL  \
-			 | CFG_CMD_DHCP  \
-			 | CFG_CMD_IMMAP \
-			 | CFG_CMD_MII   \
-			 | CFG_CMD_PING  \
-			)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-/*
- * Miscellaneous configurable options
- */
-#undef	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT		"=>"	/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define	CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CFG_LOAD_ADDR	 	0x00100000
-
-#define	CFG_HZ		        1000		/* decr freq: 1 ms ticks */
-
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CFG_IMMR		0xFF000000
-#define CFG_IMMR_SIZE		((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- */
-#define	CFG_SDRAM_BASE		0x00000000
-#if defined(CONFIG_MPC86xADS) /* new ADS */
-#define	CFG_SDRAM_SIZE	0x00800000      /* 8 meg */
-#elif defined(CONFIG_FADS)    /* old/new FADS */
-#define	CFG_SDRAM_SIZE	0x00400000      /* 4 meg */
-#else                         /* old ADS */
-#define	CFG_SDRAM_SIZE	0x00000000      /* No SDRAM */
-#endif
-
-#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
-#if (CFG_SDRAM_SIZE)
-#define CFG_MEMTEST_END		CFG_SDRAM_SIZE	/* 1 ... SDRAM_SIZE	*/
-#else
-#define CFG_MEMTEST_END		0x0400000     	/* 1 ... 4 MB in DRAM	*/
-#endif /* CFG_SDRAM_SIZE */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CFG_FLASH_BASE		TEXT_BASE
-#define CFG_FLASH_SIZE		((uint)(8 * 1024 * 1024))	/* max 8Mbyte */
-
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	16      /* max number of sectors on one chip	*/
-
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sector total size	*/
-#define CFG_ENV_OFFSET		CFG_ENV_SECT_SIZE
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment		*/
-
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for monitor	*/
-#define	CFG_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
+#define CONFIG_DRAM_50MHZ       1
+#define CONFIG_SDRAM_50MHZ      1
 
 /*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		14-22
  *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
+ * set the PLL, the low-power modes and the reset control
  */
-#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control 	(15-29)
- */
-#define CFG_PLPRCR	((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) |	\
-				PLPRCR_SPLSS | PLPRCR_TEXPS)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-#define CFG_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
-
- /*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CFG_DER		 0
-
-/* Because of the way the 860 starts up and assigns CS0 the
-* entire address space, we have to set the memory controller
-* differently.  Normally, you write the option register
-* first, and then enable the chip select by writing the
-* base register.  For CS0, you must write the base register
-* first, followed by the option register.
-*/
-
-/*
- * Init Memory Controller:
- *
- * BR0/OR0 (Flash)
- * BR1/OR1 (BCSR)
- */
-/* the other CS:s are determined by looking at parameters in BCSRx */
-
-#define BCSR_ADDR		((uint) 0xFF010000)
-#define BCSR_SIZE		((uint)(64 * 1024))
-
-#define CFG_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
-
-/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
-
-#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)   /* 8 Mbyte until detected */
-#define CFG_BR0_PRELIM	((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
-
-/* BCSRx - Board Control and Status Registers */
-#define CFG_OR1_PRELIM	0xffff8110		/* 64Kbyte address space */
-#define CFG_BR1_PRELIM	((BCSR_ADDR) | BR_V )
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/* values according to the manual */
-
-#define PCMCIA_MEM_ADDR		((uint)0xff020000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-
-#define	BCSR0			((uint) (BCSR_ADDR + 0x00))
-#define	BCSR1			((uint) (BCSR_ADDR + 0x04))
-#define	BCSR2			((uint) (BCSR_ADDR + 0x08))
-#define	BCSR3			((uint) (BCSR_ADDR + 0x0c))
-#define	BCSR4			((uint) (BCSR_ADDR + 0x10))
-
-/* FADS bitvalues by Helmut Buchsbaum
- * see MPC8xxADS User's Manual for a proper description
- * of the following structures
- */
-
-#define BCSR0_ERB       ((uint)0x80000000)
-#define BCSR0_IP        ((uint)0x40000000)
-#define BCSR0_BDIS      ((uint)0x10000000)
-#define BCSR0_BPS_MASK  ((uint)0x0C000000)
-#define BCSR0_ISB_MASK  ((uint)0x01800000)
-#define BCSR0_DBGC_MASK ((uint)0x00600000)
-#define BCSR0_DBPC_MASK ((uint)0x00180000)
-#define BCSR0_EBDF_MASK ((uint)0x00060000)
-
-#define BCSR1_FLASH_EN           ((uint)0x80000000)
-#define BCSR1_DRAM_EN            ((uint)0x40000000)
-#define BCSR1_ETHEN              ((uint)0x20000000)
-#define BCSR1_IRDEN              ((uint)0x10000000)
-#define BCSR1_FLASH_CFG_EN       ((uint)0x08000000)
-#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
-#define BCSR1_BCSR_EN            ((uint)0x02000000)
-#define BCSR1_RS232EN_1          ((uint)0x01000000)
-#define BCSR1_PCCEN              ((uint)0x00800000)
-#define BCSR1_PCCVCC0            ((uint)0x00400000)
-#define BCSR1_PCCVPP_MASK        ((uint)0x00300000)
-#define BCSR1_DRAM_HALF_WORD     ((uint)0x00080000)
-#define BCSR1_RS232EN_2          ((uint)0x00040000)
-#define BCSR1_SDRAM_EN           ((uint)0x00020000)
-#define BCSR1_PCCVCC1            ((uint)0x00010000)
-
-#define BCSR2_FLASH_PD_MASK      ((uint)0xF0000000)
-#define BCSR2_DRAM_PD_MASK       ((uint)0x07800000)
-#define BCSR2_DRAM_PD_SHIFT      (23)
-#define BCSR2_EXTTOLI_MASK       ((uint)0x00780000)
-#define BCSR2_DBREVNR_MASK       ((uint)0x00030000)
-
-#define BCSR3_DBID_MASK          ((ushort)0x3800)
-#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
-#define BCSR3_BREVNR0            ((ushort)0x0080)
-#define BCSR3_FLASH_PD_MASK      ((ushort)0x0070)
-#define BCSR3_BREVN1             ((ushort)0x0008)
-#define BCSR3_BREVN2_MASK        ((ushort)0x0003)
-
-#define BCSR4_ETHLOOP            ((uint)0x80000000)
-#define BCSR4_TFPLDL             ((uint)0x40000000)
-#define BCSR4_TPSQEL             ((uint)0x20000000)
-#define BCSR4_SIGNAL_LAMP        ((uint)0x10000000)
-#define BCSR4_FETH_EN            ((uint)0x08000000)
-#define BCSR4_FETHCFG0           ((uint)0x04000000)
-#define BCSR4_FETHFDE            ((uint)0x02000000)
-#define BCSR4_FETHCFG1           ((uint)0x00400000)
-#define BCSR4_FETHRST            ((uint)0x00200000)
-
-#define CONFIG_DRAM_50MHZ		1
-#define CONFIG_SDRAM_50MHZ              1
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-/* Machine type
-*/
-#define _MACH_8xx (_MACH_fads)
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-
-/* PCMCIA configuration */
-
-#ifdef CONFIG_MPC860
-#define PCMCIA_SLOT_A 1
-#endif
-
-#define CFG_PCMCIA_MEM_ADDR	(0x50000000)
-#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_DMA_ADDR	(0x54000000)
-#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_ATTRB_ADDR	(0x58000000)
-#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CFG_PCMCIA_IO_ADDR	(0x5C000000)
-#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
-/* we have 8 windows, we take everything up to 60000000 */
-
-#define CFG_ATA_IDE0_OFFSET	0x0000
-
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
-/* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
-/* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	0x0000
-/*#define CFG_ATA_ALT_OFFSET	0x0100 */
+#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS)
 
+#include "fads.h"
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 78ae6ba9c05..50e8a15b8d0 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -521,7 +521,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#if 1 /* test-only */
+
 #define CONFIG_NO_SERIAL_EEPROM
 /*#undef CONFIG_NO_SERIAL_EEPROM*/
 /*--------------------------------------------------------------------*/
@@ -651,16 +651,11 @@
 #define PLL_PCIDIV_3               0x00000002
 #define PLL_PCIDIV_4               0x00000003
 
-/*
-!-----------------------------------------------------------------------
-! PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
-! assuming a 33.3MHz input clock to the 405EP.
-!-----------------------------------------------------------------------
-*/
-#define PLLMR0_133_66_66_33  (PLL_CPUDIV_1 | PLL_PLBDIV_1 |  \
+/* CPU - PLB/SDRAM - EBC - OPB - PCI (assuming a 33.3MHz input clock to the 405EP) */
+#define PLLMR0_133_133_33_66_33  (PLL_CPUDIV_1 | PLL_PLBDIV_1 |  \
 			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 |  \
 			      PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_133_66_66_33  (PLL_FBKDIV_4  |  \
+#define PLLMR1_133_133_33_66_33  (PLL_FBKDIV_4  |  \
 			      PLL_FWDDIVA_6 | PLL_FWDDIVB_6 |  \
 			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
 #define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
@@ -669,27 +664,35 @@
 #define PLLMR1_200_100_50_33 (PLL_FBKDIV_6  |  \
 			      PLL_FWDDIVA_4 | PLL_FWDDIVB_4 |  \
 			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
+#define PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
 			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 |  \
 			      PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8  |  \
+#define PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8  |  \
 			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
 			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#if 0 /* test-only */
-#define PLLMR0_DEFAULT   PLLMR0_266_133_66_33
-#define PLLMR1_DEFAULT   PLLMR1_266_133_66_33
-#endif
-#if 0 /* test-only */
-#define PLLMR0_DEFAULT   PLLMR0_200_100_50_33
-#define PLLMR1_DEFAULT   PLLMR1_200_100_50_33
-#endif
-#if 1 /* test-only */
-#define PLLMR0_DEFAULT   PLLMR0_133_66_66_33
-#define PLLMR1_DEFAULT   PLLMR1_133_66_66_33
-#endif
+#define PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_2)
+#define PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10  |  \
+			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+
+#if   (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI)
+/* Model HI */
+#define PLLMR0_DEFAULT   PLLMR0_333_111_37_55_55
+#define PLLMR1_DEFAULT   PLLMR1_333_111_37_55_55
+/* Model ME */
+#elif (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME)
+#define PLLMR0_DEFAULT   PLLMR0_266_133_33_66_33
+#define PLLMR1_DEFAULT   PLLMR1_266_133_33_66_33
+#else
+/* Model BA (default) */
+#define PLLMR0_DEFAULT   PLLMR0_133_133_33_66_33
+#define PLLMR1_DEFAULT   PLLMR1_133_133_33_66_33
 
 #endif
-#endif
+
+#endif /* CONFIG_NO_SERIAL_EEPROM */
 
 #define CFG_OPB_FREQ	50000000
 
diff --git a/include/cramfs/cramfs_fs.h b/include/cramfs/cramfs_fs.h
index 7b292c0c1ec..233370988b5 100644
--- a/include/cramfs/cramfs_fs.h
+++ b/include/cramfs/cramfs_fs.h
@@ -1,14 +1,6 @@
 #ifndef __CRAMFS_H
 #define __CRAMFS_H
 
-#ifndef __KERNEL__
-
-typedef unsigned char u8;
-typedef unsigned short u16;
-typedef unsigned int u32;
-
-#endif
-
 #define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
 #define CRAMFS_SIGNATURE	"Compressed ROMFS"
 
@@ -16,12 +8,12 @@ typedef unsigned int u32;
  * Width of various bitfields in struct cramfs_inode.
  * Primarily used to generate warnings in mkcramfs.
  */
-#define CRAMFS_MODE_WIDTH 16
-#define CRAMFS_UID_WIDTH 16
-#define CRAMFS_SIZE_WIDTH 24
-#define CRAMFS_GID_WIDTH 8
-#define CRAMFS_NAMELEN_WIDTH 6
-#define CRAMFS_OFFSET_WIDTH 26
+#define CRAMFS_MODE_WIDTH	16
+#define CRAMFS_UID_WIDTH	16
+#define CRAMFS_SIZE_WIDTH	24
+#define CRAMFS_GID_WIDTH	8
+#define CRAMFS_NAMELEN_WIDTH	6
+#define CRAMFS_OFFSET_WIDTH	26
 
 /*
  * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
@@ -34,8 +26,10 @@ typedef unsigned int u32;
  */
 struct cramfs_inode {
 	u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
+
 	/* SIZE for device files is i_rdev */
 	u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
+
 	/* NAMELEN is the length of the file name, divided by 4 and
 	   rounded up.	(cramfs doesn't support hard links.) */
 	/* OFFSET: For symlinks and non-empty regular files, this
@@ -90,9 +84,53 @@ struct cramfs_super {
 				| CRAMFS_FLAG_WRONG_SIGNATURE \
 				| CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
 
+/*
+ * Since cramfs is little-endian, provide macros to swab the bitfields.
+ */
+
+#ifndef __BYTE_ORDER
+#if defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN)
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#elif defined(__BIG_ENDIAN) && !defined(__LITTLE_ENDIAN)
+#define __BYTE_ORDER __BIG_ENDIAN
+#else
+#error "unable to define __BYTE_ORDER"
+#endif
+#endif /* not __BYTE_ORDER */
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define CRAMFS_16(x)	(x)
+#define CRAMFS_24(x)	(x)
+#define CRAMFS_32(x)	(x)
+#define CRAMFS_GET_NAMELEN(x)	((x)->namelen)
+#define CRAMFS_GET_OFFSET(x)	((x)->offset)
+#define CRAMFS_SET_OFFSET(x,y)	((x)->offset = (y))
+#define CRAMFS_SET_NAMELEN(x,y) ((x)->namelen = (y))
+#elif __BYTE_ORDER == __BIG_ENDIAN
+#ifdef __KERNEL__
+#define CRAMFS_16(x)	swab16(x)
+#define CRAMFS_24(x)	((swab32(x)) >> 8)
+#define CRAMFS_32(x)	swab32(x)
+#else /* not __KERNEL__ */
+#define CRAMFS_16(x)	bswap_16(x)
+#define CRAMFS_24(x)	((bswap_32(x)) >> 8)
+#define CRAMFS_32(x)	bswap_32(x)
+#endif /* not __KERNEL__ */
+#define CRAMFS_GET_NAMELEN(x)	(((u8*)(x))[8] & 0x3f)
+#define CRAMFS_GET_OFFSET(x)	((CRAMFS_24(((u32*)(x))[2] & 0xffffff) << 2) |\
+				 ((((u32*)(x))[2] & 0xc0000000) >> 30))
+#define CRAMFS_SET_NAMELEN(x,y) (((u8*)(x))[8] = (((0x3f & (y))) | \
+						  (0xc0 & ((u8*)(x))[8])))
+#define CRAMFS_SET_OFFSET(x,y)	(((u32*)(x))[2] = (((y) & 3) << 30) | \
+				 CRAMFS_24((((y) & 0x03ffffff) >> 2)) | \
+				 (((u32)(((u8*)(x))[8] & 0x3f)) << 24))
+#else
+#error "__BYTE_ORDER must be __LITTLE_ENDIAN or __BIG_ENDIAN"
+#endif
+
 /* Uncompression interfaces to the underlying zlib */
-int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen);
+int cramfs_uncompress_block(void *dst, void *src, int srclen);
 int cramfs_uncompress_init(void);
 int cramfs_uncompress_exit(void);
 
-#endif
+#endif	/* __CRAMFS_H */
diff --git a/include/jffs2/jffs2.h b/include/jffs2/jffs2.h
index 4bdc525ce29..dee43a6d319 100644
--- a/include/jffs2/jffs2.h
+++ b/include/jffs2/jffs2.h
@@ -202,4 +202,5 @@ void dynrubin_decompress(unsigned char *data_in, unsigned char *cpage_out,
 long zlib_decompress(unsigned char *data_in, unsigned char *cpage_out,
 	                      __u32 srclen, __u32 destlen);
 
+char *mkmodestr(unsigned long mode, char *str);
 #endif /* __LINUX_JFFS2_H__ */
diff --git a/include/mpc8xx.h b/include/mpc8xx.h
index 847c2b4b6b9..3976125bfea 100644
--- a/include/mpc8xx.h
+++ b/include/mpc8xx.h
@@ -132,10 +132,15 @@
 #define RSR_ALLBITS	(RSR_JTRS|RSR_DBSRS|RSR_DBHRS|RSR_CSRS|RSR_SWRS|RSR_LLRS|RSR_ESRS|RSR_EHRS)
 
 /*-----------------------------------------------------------------------
+ * Newer chips (MPC866 family and MPC87x/88x family) have different
+ * clock distribution system. Their IMMR lower half is >= 0x0800
+ */
+#define MPC8xx_NEW_CLK 0x0800
+
+/*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register			15-30
  */
-#ifdef CONFIG_MPC866_et_al
-#define PLPRCR_MF_MSK	0xFFFF001E	/* Multiplication factor + PDF bits	*/
+/* Newer chips (MPC866/87x/88x et al) defines */
 #define PLPRCR_MFN_MSK	0xF8000000	/* Multiplication factor numerator bits */
 #define PLPRCR_MFN_SHIFT	27	/* Multiplication factor numerator shift*/
 #define PLPRCR_MFD_MSK	0x07C00000	/* Multiplication factor denominator bits */
@@ -144,32 +149,39 @@
 #define PLPRCR_S_SHIFT		20	/* Multiplication factor integer shift	*/
 #define PLPRCR_MFI_MSK	0x000F0000	/* Multiplication factor integer bits	*/
 #define PLPRCR_MFI_SHIFT	16	/* Multiplication factor integer shift	*/
-#else
+
+#define PLPRCR_PDF_MSK	0x0000001E	/* Predivision Factor bits		*/
+#define PLPRCR_PDF_SHIFT	 1	/* Predivision Factor shift value	*/
+#define PLPRCR_DBRMO	0x00000001	/* DPLL BRM Order bit			*/
+
+/* Multiplication factor + PDF bits */
+#define PLPRCR_MFACT_MSK (PLPRCR_MFN_MSK | \
+			  PLPRCR_MFD_MSK | \
+			  PLPRCR_S_MSK	 | \
+			  PLPRCR_MFI_MSK | \
+			  PLPRCR_PDF_MSK)
+
+/* Older chips (MPC860/862 et al) defines */
 #define PLPRCR_MF_MSK	0xFFF00000	/* Multiplication factor bits		*/
 #define PLPRCR_MF_SHIFT		20	/* Multiplication factor shift value	*/
-#endif
+
 #define PLPRCR_SPLSS	0x00008000	/* SPLL Lock Status Sticky bit		*/
-#define PLPRCR_TEXPS	0x00004000	/* TEXP Status				*/
-#ifndef CONFIG_MPC866_et_al
 #define PLPRCR_TMIST	0x00001000	/* Timers Interrupt Status		*/
-#endif
-#define PLPRCR_CSRC	0x00000400	/* Clock Source				*/
-#ifndef CONFIG_MPC866_et_al
+
 #define PLPRCR_LPM_MSK	0x00000300	/* Low Power Mode mask			*/
 #define PLPRCR_LPM_NORMAL 0x00000000	/* normal power management mode		*/
 #define PLPRCR_LPM_DOZE	  0x00000100	/* doze power management mode		*/
 #define PLPRCR_LPM_SLEEP  0x00000200	/* sleep power management mode		*/
 #define PLPRCR_LPM_DEEP_SLEEP 0x00000300 /* deep sleep power mgt mode		*/
 #define PLPRCR_LPM_DOWN	  0x00000300	/* down power management mode		*/
-#endif
+
+/* Common defines */
+#define PLPRCR_TEXPS	0x00004000	/* TEXP Status				*/
+#define PLPRCR_CSRC	0x00000400	/* Clock Source				*/
+
 #define PLPRCR_CSR	0x00000080	/* CheskStop Reset value		*/
 #define PLPRCR_LOLRE	0x00000040	/* Loss Of Lock Reset Enable		*/
 #define PLPRCR_FIOPD	0x00000020	/* Force I/O Pull Down			*/
-#ifdef CONFIG_MPC866_et_al
-#define PLPRCR_PDF_MSK	0x0000001E	/* Predivision Factor bits		*/
-#define PLPRCR_PDF_SHIFT	 1	/* Predivision Factor shift value	*/
-#define PLPRCR_DBRMO	0x00000001	/* DPLL BRM Order bit			*/
-#endif
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register			15-27
diff --git a/include/nios-io.h b/include/nios-io.h
index 11ff78d0764..64da92abfe4 100644
--- a/include/nios-io.h
+++ b/include/nios-io.h
@@ -136,4 +136,35 @@ typedef volatile struct nios_spi_t {
 #define NIOS_SPI_IE		(1 << 8)	/* exception int ena */
 #define NIOS_SPI_SSO		(1 << 10)	/* override SS_n output */
 
+/*------------------------------------------------------------------------
+ * ASMI
+ *----------------------------------------------------------------------*/
+typedef volatile struct nios_asmi_t {
+	unsigned	rxdata;		/* Rx data reg */
+	unsigned	txdata;		/* Tx data reg */
+	unsigned	status;		/* Status reg */
+	unsigned	control;	/* Control reg */
+	unsigned	reserved;
+	unsigned	slavesel;	/* Slave select */
+	unsigned	endofpacket;	/* End-of-packet reg */
+}nios_asmi_t;
+
+/* status register */
+#define NIOS_ASMI_ROE		(1 << 3)	/* rx overrun */
+#define NIOS_ASMI_TOE		(1 << 4)	/* tx overrun */
+#define NIOS_ASMI_TMT		(1 << 5)	/* tx empty */
+#define NIOS_ASMI_TRDY		(1 << 6)	/* tx ready */
+#define NIOS_ASMI_RRDY		(1 << 7)	/* rx ready */
+#define NIOS_ASMI_E		(1 << 8)	/* exception */
+#define NIOS_ASMI_EOP		(1 << 9)	/* eop detected */
+
+/* control register */
+#define NIOS_ASMI_IROE		(1 << 3)	/* rx overrun int ena */
+#define NIOS_ASMI_ITOE		(1 << 4)	/* tx overrun int ena */
+#define NIOS_ASMI_ITRDY		(1 << 6)	/* tx ready int ena */
+#define NIOS_ASMI_IRRDY		(1 << 7)	/* rx ready int ena */
+#define NIOS_ASMI_IE		(1 << 8)	/* exception int ena */
+#define NIOS_ASMI_IEOP		(1 << 9)	/* rx eop int ena */
+#define NIOS_ASMI_SSO		(1 << 10)	/* slave select enable */
+
 #endif /* __NIOSIO_H__ */
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 388b149e0b8..3080be3b006 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -40,10 +40,10 @@
 					/* The RPX series use SLOT_B	*/
 #if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
 # define CONFIG_PCMCIA_SLOT_B
-#elif defined(CONFIG_ADS)		/* The ADS  board use SLOT_A	*/
+#elif defined(CONFIG_ADS)		/* The ADS  board uses SLOT_A	*/
 # define CONFIG_PCMCIA_SLOT_A
 #elif defined(CONFIG_FADS)		/* The FADS series are a mess	*/
-# if defined(CONFIG_MPC86x || defined(CONFIG_MPC821)
+# if defined(CONFIG_MPC86x) || defined(CONFIG_MPC821)
 #  define CONFIG_PCMCIA_SLOT_A
 # else
 #  define CONFIG_PCMCIA_SLOT_B