diff options
| author | Scott Wood <scottwood@freescale.com> | 2012-01-11 15:41:01 -0600 |
|---|---|---|
| committer | Scott Wood <scottwood@freescale.com> | 2012-01-26 16:09:06 -0600 |
| commit | 25efd99dbb1352314c9eacdfae42064c2ca15499 (patch) | |
| tree | 24ac75339de7d35667057bf7ff97779ca2f7033e /nand_spl/nand_boot.c | |
| parent | 80519c833411af115223c7b614f71493257aca1d (diff) | |
nand_spl: store ecc data on the stack
Adapt the following patch from spl to nand_spl:
Author: Stefano Babic <sbabic@denx.de>
Date: Thu Dec 15 10:55:37 2011 +0100
nand_spl_simple: store ecc data on the stack
Currently nand_spl_simple puts it's temp data at 0x10000 offset in SDRAM
which is likely to contain already loaded data.
The patch saves the oob data and the ecc on the stack replacing
the fixed address in RAM.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ilya Yanok <yanok@emcraft.com>
CC: Scott Wood <scottwood@freescale.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Simon Schwarz <simonschwarzcor@googlemail.com>
CC: Wolfgang Denk <wd@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
While nand_spl is on its way out, in favor of spl, there are still
many boards using it, and conversions are gradual. This allows us
to get rid of CONFIG_SYS_NAND_ECCSTEPS and CONFIG_SYS_NAND_ECCTOTAL now,
which would otherwise be likely to linger unreferenced after a conversion.
It also eliminates a temporary error in the hawkboard_nand build, since
the spl version of the patch removed ECCSTEPS/TOTAL from hawkboard.h, but
the spl conversion is pending (and may be merged via a different tree).
Signed-off-by: Scott Wood <scottwood@freescale.com>
Diffstat (limited to 'nand_spl/nand_boot.c')
| -rw-r--r-- | nand_spl/nand_boot.c | 42 |
1 files changed, 16 insertions, 26 deletions
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index 2326962b20f..bfaabd3199c 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -24,6 +24,11 @@ static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS; +#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define ECCTOTAL (ECCSTEPS * CONFIG_SYS_NAND_ECCBYTES) + + #if (CONFIG_SYS_NAND_PAGE_SIZE <= 512) /* * NAND command for small page NAND devices (512) @@ -139,29 +144,21 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block) static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) { struct nand_chip *this = mtd->priv; - u_char *ecc_calc; - u_char *ecc_code; - u_char *oob_data; + u_char ecc_calc[ECCTOTAL]; + u_char ecc_code[ECCTOTAL]; + u_char oob_data[CONFIG_SYS_NAND_OOBSIZE]; int i; int eccsize = CONFIG_SYS_NAND_ECCSIZE; int eccbytes = CONFIG_SYS_NAND_ECCBYTES; - int eccsteps = CONFIG_SYS_NAND_ECCSTEPS; + int eccsteps = ECCSTEPS; uint8_t *p = dst; - /* - * No malloc available for now, just use some temporary locations - * in SDRAM - */ - ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000); - ecc_code = ecc_calc + 0x100; - oob_data = ecc_calc + 0x200; - nand_command(mtd, block, page, 0, NAND_CMD_READOOB); this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE); nand_command(mtd, block, page, 0, NAND_CMD_READ0); /* Pick the ECC bytes out of the oob data */ - for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++) + for (i = 0; i < ECCTOTAL; i++) ecc_code[i] = oob_data[nand_ecc_pos[i]]; @@ -178,24 +175,17 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) { struct nand_chip *this = mtd->priv; - u_char *ecc_calc; - u_char *ecc_code; - u_char *oob_data; + u_char ecc_calc[ECCTOTAL]; + u_char ecc_code[ECCTOTAL]; + u_char oob_data[CONFIG_SYS_NAND_OOBSIZE]; int i; int eccsize = CONFIG_SYS_NAND_ECCSIZE; int eccbytes = CONFIG_SYS_NAND_ECCBYTES; - int eccsteps = CONFIG_SYS_NAND_ECCSTEPS; + int eccsteps = ECCSTEPS; uint8_t *p = dst; nand_command(mtd, block, page, 0, NAND_CMD_READ0); - /* No malloc available for now, just use some temporary locations - * in SDRAM - */ - ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000); - ecc_code = ecc_calc + 0x100; - oob_data = ecc_calc + 0x200; - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { this->ecc.hwctl(mtd, NAND_ECC_READ); this->read_buf(mtd, p, eccsize); @@ -204,10 +194,10 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE); /* Pick the ECC bytes out of the oob data */ - for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++) + for (i = 0; i < ECCTOTAL; i++) ecc_code[i] = oob_data[nand_ecc_pos[i]]; - eccsteps = CONFIG_SYS_NAND_ECCSTEPS; + eccsteps = ECCSTEPS; p = dst; for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { |