Initial revision

1 files changed, 583 insertions, 0 deletions

diff --git a/post/uart.c b/post/uart.c
new file mode 100644
index 00000000000..354c6c7a3d8
--- /dev/null
+++ b/post/uart.c
@@ -0,0 +1,583 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * UART test
+ *
+ * The Serial Management Controllers (SMC) and the Serial Communication
+ * Controllers (SCC) listed in ctlr_list array below are tested in
+ * the loopback UART mode.
+ * The controllers are configured accordingly and several characters
+ * are transmitted. The configurable test parameters are:
+ *   MIN_PACKET_LENGTH - minimum size of packet to transmit
+ *   MAX_PACKET_LENGTH - maximum size of packet to transmit
+ *   TEST_NUM - number of tests
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#if defined(CONFIG_8xx)
+#include <commproc.h>
+#elif defined(CONFIG_MPC8260)
+#include <asm/cpm_8260.h>
+#else
+#error "Apparently a bad configuration, please fix."
+#endif
+#include <command.h>
+#include <net.h>
+
+#if CONFIG_POST & CFG_POST_UART
+
+#define CTLR_SMC 0
+#define CTLR_SCC 1
+
+/* The list of controllers to test */
+#if defined(CONFIG_MPC823)
+static int ctlr_list[][2] =
+		{ {CTLR_SMC, 0}, {CTLR_SMC, 1}, {CTLR_SCC, 1} };
+#else
+static int ctlr_list[][2] = { };
+#endif
+
+#define CTRL_LIST_SIZE (sizeof(ctlr_list) / sizeof(ctlr_list[0]))
+
+static struct {
+	void (*init) (int index);
+	void (*putc) (int index, const char c);
+	int (*getc) (int index);
+} ctlr_proc[2];
+
+static char *ctlr_name[2] = { "SMC", "SCC" };
+
+static int used_by_uart[2] = { -1, -1 };
+static int used_by_ether[2] = { -1, -1 };
+
+static int proff_smc[] = { PROFF_SMC1, PROFF_SMC2 };
+static int proff_scc[] =
+		{ PROFF_SCC1, PROFF_SCC2, PROFF_SCC3, PROFF_SCC4 };
+
+  /*
+   * SMC callbacks
+   */
+
+static void smc_init (int smc_index)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	static int cpm_cr_ch[] = { CPM_CR_CH_SMC1, CPM_CR_CH_SMC2 };
+
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile smc_t *sp;
+	volatile smc_uart_t *up;
+	volatile cbd_t *tbdf, *rbdf;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
+	uint dpaddr;
+
+	/* initialize pointers to SMC */
+
+	sp = (smc_t *) & (cp->cp_smc[smc_index]);
+	up = (smc_uart_t *) & cp->cp_dparam[proff_smc[smc_index]];
+
+	/* Disable transmitter/receiver.
+	 */
+	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+
+	/* Enable SDMA.
+	 */
+	im->im_siu_conf.sc_sdcr = 1;
+
+	/* clear error conditions */
+#ifdef	CFG_SDSR
+	im->im_sdma.sdma_sdsr = CFG_SDSR;
+#else
+	im->im_sdma.sdma_sdsr = 0x83;
+#endif
+
+	/* clear SDMA interrupt mask */
+#ifdef	CFG_SDMR
+	im->im_sdma.sdma_sdmr = CFG_SDMR;
+#else
+	im->im_sdma.sdma_sdmr = 0x00;
+#endif
+
+#if defined(CONFIG_FADS)
+	/* Enable RS232 */
+	*((uint *) BCSR1) &=
+			~(smc_index == 1 ? BCSR1_RS232EN_1 : BCSR1_RS232EN_2);
+#endif
+
+#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
+	/* Enable Monitor Port Transceiver */
+	*((uchar *) BCSR0) |= BCSR0_ENMONXCVR;
+#endif
+
+	/* Set the physical address of the host memory buffers in
+	 * the buffer descriptors.
+	 */
+
+#ifdef CFG_ALLOC_DPRAM
+	dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8);
+#else
+	dpaddr = CPM_POST_BASE;
+#endif
+
+	/* Allocate space for two buffer descriptors in the DP ram.
+	 * For now, this address seems OK, but it may have to
+	 * change with newer versions of the firmware.
+	 * damm: allocating space after the two buffers for rx/tx data
+	 */
+
+	rbdf = (cbd_t *) & cp->cp_dpmem[dpaddr];
+	rbdf->cbd_bufaddr = (uint) (rbdf + 2);
+	rbdf->cbd_sc = 0;
+	tbdf = rbdf + 1;
+	tbdf->cbd_bufaddr = ((uint) (rbdf + 2)) + 1;
+	tbdf->cbd_sc = 0;
+
+	/* Set up the uart parameters in the parameter ram.
+	 */
+	up->smc_rbase = dpaddr;
+	up->smc_tbase = dpaddr + sizeof (cbd_t);
+	up->smc_rfcr = SMC_EB;
+	up->smc_tfcr = SMC_EB;
+
+#if defined(CONFIG_MBX)
+	board_serial_init ();
+#endif
+
+	/* Set UART mode, 8 bit, no parity, one stop.
+	 * Enable receive and transmit.
+	 * Set local loopback mode.
+	 */
+	sp->smc_smcmr = smcr_mk_clen (9) | SMCMR_SM_UART | (ushort) 0x0004;
+
+	/* Mask all interrupts and remove anything pending.
+	 */
+	sp->smc_smcm = 0;
+	sp->smc_smce = 0xff;
+
+	/* Set up the baud rate generator.
+	 */
+	cp->cp_simode = 0x00000000;
+
+	cp->cp_brgc1 =
+			(((gd->cpu_clk / 16 / gd->baudrate) -
+			  1) << 1) | CPM_BRG_EN;
+
+	/* Make the first buffer the only buffer.
+	 */
+	tbdf->cbd_sc |= BD_SC_WRAP;
+	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+	/* Single character receive.
+	 */
+	up->smc_mrblr = 1;
+	up->smc_maxidl = 0;
+
+	/* Initialize Tx/Rx parameters.
+	 */
+
+	while (cp->cp_cpcr & CPM_CR_FLG)	/* wait if cp is busy */
+		;
+
+	cp->cp_cpcr =
+			mk_cr_cmd (cpm_cr_ch[smc_index], CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+	while (cp->cp_cpcr & CPM_CR_FLG)	/* wait if cp is busy */
+		;
+
+	/* Enable transmitter/receiver.
+	 */
+	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
+}
+
+static void smc_putc (int smc_index, const char c)
+{
+	volatile cbd_t *tbdf;
+	volatile char *buf;
+	volatile smc_uart_t *up;
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cpmp = &(im->im_cpm);
+
+	up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]];
+
+	tbdf = (cbd_t *) & cpmp->cp_dpmem[up->smc_tbase];
+
+	/* Wait for last character to go.
+	 */
+
+	buf = (char *) tbdf->cbd_bufaddr;
+#if 0
+	__asm__ ("eieio");
+	while (tbdf->cbd_sc & BD_SC_READY)
+		__asm__ ("eieio");
+#endif
+
+	*buf = c;
+	tbdf->cbd_datlen = 1;
+	tbdf->cbd_sc |= BD_SC_READY;
+	__asm__ ("eieio");
+#if 1
+	while (tbdf->cbd_sc & BD_SC_READY)
+		__asm__ ("eieio");
+#endif
+}
+
+static int smc_getc (int smc_index)
+{
+	volatile cbd_t *rbdf;
+	volatile unsigned char *buf;
+	volatile smc_uart_t *up;
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cpmp = &(im->im_cpm);
+	unsigned char c;
+	int i;
+
+	up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]];
+
+	rbdf = (cbd_t *) & cpmp->cp_dpmem[up->smc_rbase];
+
+	/* Wait for character to show up.
+	 */
+	buf = (unsigned char *) rbdf->cbd_bufaddr;
+#if 0
+	while (rbdf->cbd_sc & BD_SC_EMPTY);
+#else
+	for (i = 100; i > 0; i--) {
+		if (!(rbdf->cbd_sc & BD_SC_EMPTY))
+			break;
+		udelay (1000);
+	}
+
+	if (i == 0)
+		return -1;
+#endif
+	c = *buf;
+	rbdf->cbd_sc |= BD_SC_EMPTY;
+
+	return (c);
+}
+
+  /*
+   * SCC callbacks
+   */
+
+static void scc_init (int scc_index)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	static int cpm_cr_ch[] = {
+		CPM_CR_CH_SCC1,
+		CPM_CR_CH_SCC2,
+		CPM_CR_CH_SCC3,
+		CPM_CR_CH_SCC4,
+	};
+
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile scc_t *sp;
+	volatile scc_uart_t *up;
+	volatile cbd_t *tbdf, *rbdf;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
+	uint dpaddr;
+
+	/* initialize pointers to SCC */
+
+	sp = (scc_t *) & (cp->cp_scc[scc_index]);
+	up = (scc_uart_t *) & cp->cp_dparam[proff_scc[scc_index]];
+
+	/* Disable transmitter/receiver.
+	 */
+	sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+
+	/* Allocate space for two buffer descriptors in the DP ram.
+	 */
+
+#ifdef CFG_ALLOC_DPRAM
+	dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8);
+#else
+	dpaddr = CPM_POST_BASE;
+#endif
+
+	/* Enable SDMA.
+	 */
+	im->im_siu_conf.sc_sdcr = 0x0001;
+
+	/* Set the physical address of the host memory buffers in
+	 * the buffer descriptors.
+	 */
+
+	rbdf = (cbd_t *) & cp->cp_dpmem[dpaddr];
+	rbdf->cbd_bufaddr = (uint) (rbdf + 2);
+	rbdf->cbd_sc = 0;
+	tbdf = rbdf + 1;
+	tbdf->cbd_bufaddr = ((uint) (rbdf + 2)) + 1;
+	tbdf->cbd_sc = 0;
+
+	/* Set up the baud rate generator.
+	 */
+	cp->cp_sicr &= ~(0x000000FF << (8 * scc_index));
+	/* no |= needed, since BRG1 is 000 */
+
+	cp->cp_brgc1 =
+			(((gd->cpu_clk / 16 / gd->baudrate) -
+			  1) << 1) | CPM_BRG_EN;
+
+	/* Set up the uart parameters in the parameter ram.
+	 */
+	up->scc_genscc.scc_rbase = dpaddr;
+	up->scc_genscc.scc_tbase = dpaddr + sizeof (cbd_t);
+
+	/* Initialize Tx/Rx parameters.
+	 */
+	while (cp->cp_cpcr & CPM_CR_FLG)	/* wait if cp is busy */
+		;
+	cp->cp_cpcr =
+			mk_cr_cmd (cpm_cr_ch[scc_index], CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+	while (cp->cp_cpcr & CPM_CR_FLG)	/* wait if cp is busy */
+		;
+
+	up->scc_genscc.scc_rfcr = SCC_EB | 0x05;
+	up->scc_genscc.scc_tfcr = SCC_EB | 0x05;
+
+	up->scc_genscc.scc_mrblr = 1;	/* Single character receive */
+	up->scc_maxidl = 0;		/* disable max idle */
+	up->scc_brkcr = 1;		/* send one break character on stop TX */
+	up->scc_parec = 0;
+	up->scc_frmec = 0;
+	up->scc_nosec = 0;
+	up->scc_brkec = 0;
+	up->scc_uaddr1 = 0;
+	up->scc_uaddr2 = 0;
+	up->scc_toseq = 0;
+	up->scc_char1 = 0x8000;
+	up->scc_char2 = 0x8000;
+	up->scc_char3 = 0x8000;
+	up->scc_char4 = 0x8000;
+	up->scc_char5 = 0x8000;
+	up->scc_char6 = 0x8000;
+	up->scc_char7 = 0x8000;
+	up->scc_char8 = 0x8000;
+	up->scc_rccm = 0xc0ff;
+
+	/* Set low latency / small fifo.
+	 */
+	sp->scc_gsmrh = SCC_GSMRH_RFW;
+
+	/* Set UART mode
+	 */
+	sp->scc_gsmrl &= ~0xF;
+	sp->scc_gsmrl |= SCC_GSMRL_MODE_UART;
+
+	/* Set local loopback mode.
+	 */
+	sp->scc_gsmrl &= ~SCC_GSMRL_DIAG_LE;
+	sp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
+
+	/* Set clock divider 16 on Tx and Rx
+	 */
+	sp->scc_gsmrl |= (SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+
+	sp->scc_psmr |= SCU_PSMR_CL;
+
+	/* Mask all interrupts and remove anything pending.
+	 */
+	sp->scc_sccm = 0;
+	sp->scc_scce = 0xffff;
+	sp->scc_dsr = 0x7e7e;
+	sp->scc_psmr = 0x3000;
+
+	/* Make the first buffer the only buffer.
+	 */
+	tbdf->cbd_sc |= BD_SC_WRAP;
+	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+	/* Enable transmitter/receiver.
+	 */
+	sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+
+static void scc_putc (int scc_index, const char c)
+{
+	volatile cbd_t *tbdf;
+	volatile char *buf;
+	volatile scc_uart_t *up;
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cpmp = &(im->im_cpm);
+
+	up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]];
+
+	tbdf = (cbd_t *) & cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
+
+	/* Wait for last character to go.
+	 */
+
+	buf = (char *) tbdf->cbd_bufaddr;
+#if 0
+	__asm__ ("eieio");
+	while (tbdf->cbd_sc & BD_SC_READY)
+		__asm__ ("eieio");
+#endif
+
+	*buf = c;
+	tbdf->cbd_datlen = 1;
+	tbdf->cbd_sc |= BD_SC_READY;
+	__asm__ ("eieio");
+#if 1
+	while (tbdf->cbd_sc & BD_SC_READY)
+		__asm__ ("eieio");
+#endif
+}
+
+static int scc_getc (int scc_index)
+{
+	volatile cbd_t *rbdf;
+	volatile unsigned char *buf;
+	volatile scc_uart_t *up;
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cpmp = &(im->im_cpm);
+	unsigned char c;
+	int i;
+
+	up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]];
+
+	rbdf = (cbd_t *) & cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
+
+	/* Wait for character to show up.
+	 */
+	buf = (unsigned char *) rbdf->cbd_bufaddr;
+#if 0
+	while (rbdf->cbd_sc & BD_SC_EMPTY);
+#else
+	for (i = 100; i > 0; i--) {
+		if (!(rbdf->cbd_sc & BD_SC_EMPTY))
+			break;
+		udelay (1000);
+	}
+
+	if (i == 0)
+		return -1;
+#endif
+	c = *buf;
+	rbdf->cbd_sc |= BD_SC_EMPTY;
+
+	return (c);
+}
+
+  /*
+   * Test routines
+   */
+
+static int test_ctlr (int ctlr, int index)
+{
+	int res = -1;
+	char test_str[] = "*** UART Test String ***\r\n";
+	int i;
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+	if (used_by_uart[ctlr] == index) {
+		while (ctlr_proc[ctlr].getc (index) != -1);
+	}
+#endif
+
+	ctlr_proc[ctlr].init (index);
+
+	for (i = 0; i < sizeof (test_str) - 1; i++) {
+		ctlr_proc[ctlr].putc (index, test_str[i]);
+		if (ctlr_proc[ctlr].getc (index) != test_str[i])
+			goto Done;
+	}
+
+	res = 0;
+
+  Done:
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+	if (used_by_uart[ctlr] == index) {
+		serial_init ();
+	}
+#endif
+
+#if defined(SCC_ENET)
+	if (used_by_ether[ctlr] == index) {
+		DECLARE_GLOBAL_DATA_PTR;
+
+		eth_init (gd->bd);
+	}
+#endif
+
+	if (res != 0) {
+		post_log ("uart %s%d test failed\n",
+				ctlr_name[ctlr], index + 1);
+	}
+
+	return res;
+}
+
+int uart_post_test (int flags)
+{
+	int res = 0;
+	int i;
+
+#if defined(CONFIG_8xx_CONS_SMC1)
+	used_by_uart[CTLR_SMC] = 0;
+#elif defined(CONFIG_8xx_CONS_SMC2)
+	used_by_uart[CTLR_SMC] = 1;
+#elif defined(CONFIG_8xx_CONS_SCC1)
+	used_by_uart[CTLR_SCC] = 0;
+#elif defined(CONFIG_8xx_CONS_SCC2)
+	used_by_uart[CTLR_SCC] = 1;
+#elif defined(CONFIG_8xx_CONS_SCC3)
+	used_by_uart[CTLR_SCC] = 2;
+#elif defined(CONFIG_8xx_CONS_SCC4)
+	used_by_uart[CTLR_SCC] = 3;
+#endif
+
+#if defined(SCC_ENET)
+	used_by_ether[CTLR_SCC] = SCC_ENET;
+#endif
+
+	ctlr_proc[CTLR_SMC].init = smc_init;
+	ctlr_proc[CTLR_SMC].putc = smc_putc;
+	ctlr_proc[CTLR_SMC].getc = smc_getc;
+
+	ctlr_proc[CTLR_SCC].init = scc_init;
+	ctlr_proc[CTLR_SCC].putc = scc_putc;
+	ctlr_proc[CTLR_SCC].getc = scc_getc;
+
+	for (i = 0; i < CTRL_LIST_SIZE; i++) {
+		if (test_ctlr (ctlr_list[i][0], ctlr_list[i][1]) != 0) {
+			res = -1;
+		}
+	}
+
+	return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_UART */
+
+#endif /* CONFIG_POST */