diff options
-rw-r--r-- | Makefile | 14 | ||||
-rw-r--r-- | board/atmel/at91sam9260ek/at91sam9260ek.c | 5 | ||||
-rw-r--r-- | cpu/arm926ejs/at91/usb.c | 4 | ||||
-rw-r--r-- | drivers/net/macb.c | 4 | ||||
-rw-r--r-- | include/asm-arm/arch-at91/hardware.h | 2 | ||||
-rw-r--r-- | include/configs/at91sam9260ek.h | 20 |
6 files changed, 39 insertions, 10 deletions
@@ -2608,8 +2608,18 @@ at91cap9adk_config : unconfig at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \ at91sam9260ek_dataflash_cs1_config \ -at91sam9260ek_config : unconfig - @mkdir -p $(obj)include +at91sam9260ek_config \ +at91sam9g20ek_nandflash_config \ +at91sam9g20ek_dataflash_cs0_config \ +at91sam9g20ek_dataflash_cs1_config \ +at91sam9g20ek_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring 9g20,$@)" ] ; then \ + echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ + $(XECHO) "... 9G20 Variant" ; \ + else \ + echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ + fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index ef99b8b0d51..58599fa21ea 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -212,8 +212,13 @@ int board_init(void) /* Enable Ctrlc */ console_init_f(); +#ifdef CONFIG_AT91SAM9G20EK + /* arch number of AT91SAM9260EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; +#else /* arch number of AT91SAM9260EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; +#endif /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; diff --git a/cpu/arm926ejs/at91/usb.c b/cpu/arm926ejs/at91/usb.c index a15ab1693c9..7c44ad0e95e 100644 --- a/cpu/arm926ejs/at91/usb.c +++ b/cpu/arm926ejs/at91/usb.c @@ -33,7 +33,7 @@ int usb_cpu_init(void) { #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) /* Enable PLLB */ at91_sys_write(AT91_CKGR_PLLBR, CONFIG_SYS_AT91_PLLB); while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) @@ -62,7 +62,7 @@ int usb_cpu_stop(void) #endif #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) /* Disable PLLB */ at91_sys_write(AT91_CKGR_PLLBR, 0); while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != 0) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 98e8c73cabb..f586be8452a 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -416,14 +416,14 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) /* choose RMII or MII mode. This depends on the board */ #ifdef CONFIG_RMII #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, 0); #endif #else #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) macb_writel(macb, USRIO, MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, MACB_BIT(MII)); diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h index b881e4e2e00..4f0e1a7e6d4 100644 --- a/include/asm-arm/arch-at91/hardware.h +++ b/include/asm-arm/arch-at91/hardware.h @@ -18,7 +18,7 @@ #if defined(CONFIG_AT91RM9200) #include <asm/arch/at91rm9200.h> -#elif defined(CONFIG_AT91SAM9260) +#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20) #include <asm/arch/at91sam9260.h> #define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 #define AT91_ID_UHP AT91SAM9260_ID_UHP diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 15389296f25..8044d0a8417 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -28,18 +28,27 @@ #define __CONFIG_H /* ARM asynchronous clock */ -#define AT91_CPU_NAME "AT91SAM9260" #define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ -#define AT91_MASTER_CLOCK 100000000 /* peripheral */ -#define AT91_CPU_CLOCK 200000000 /* cpu */ #define CONFIG_SYS_AT91_PLLB 0x107c3e18 /* PLLB settings for USB */ #define CONFIG_SYS_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ + +#ifdef CONFIG_AT91SAM9G20EK +#define AT91_CPU_NAME "AT91SAM9G20" +#define AT91_MASTER_CLOCK 132000000 /* peripheral */ +#define AT91_CPU_CLOCK 396000000 /* cpu */ +#define CONFIG_AT91SAM9G20 1 /* It's an Atmel AT91SAM9G20 SoC*/ +#else +#define AT91_CPU_NAME "AT91SAM9260" +#define AT91_MASTER_CLOCK 100000000 /* peripheral */ +#define AT91_CPU_CLOCK 200000000 /* cpu */ #define CONFIG_AT91SAM9260 1 /* It's an Atmel AT91SAM9260 SoC*/ #define CONFIG_AT91SAM9260EK 1 /* on an AT91SAM9260EK Board */ +#endif + #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -96,7 +105,12 @@ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ #define AT91_SPI_CLK 15000000 + +#ifdef CONFIG_AT91SAM9G20EK +#define DATAFLASH_TCSS (0x22 << 16) +#else #define DATAFLASH_TCSS (0x1a << 16) +#endif #define DATAFLASH_TCHS (0x1 << 24) /* NAND flash */ |