diff options
| -rw-r--r-- | Makefile | 5 | ||||
| -rw-r--r-- | board/sunxi/README.sunxi64 | 3 |
2 files changed, 6 insertions, 2 deletions
@@ -1191,8 +1191,13 @@ u-boot-x86-16bit.bin: u-boot FORCE endif ifneq ($(CONFIG_ARCH_SUNXI),) +ifeq ($(CONFIG_ARM64),) u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE $(call if_changed,binman) +else +u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE + $(call if_changed,cat) +endif endif ifneq ($(CONFIG_TEGRA),) diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64 index c492f749b8b..5a363d27b8a 100644 --- a/board/sunxi/README.sunxi64 +++ b/board/sunxi/README.sunxi64 @@ -95,9 +95,8 @@ Transfer the SPL and the U-Boot FIT image directly to an uSD card: (replace /dev/sdx with you SD card device file name, which could be /dev/mmcblk[x] as well). -Alternatively you can concatenate the SPL and the U-Boot FIT image into a +Alternatively you can use the SPL and the U-Boot FIT image combined into a single file and transfer that instead: -$ cat spl/sunxi-spl.bin u-boot.itb > u-boot-sunxi-with-spl.bin # dd if=u-boot-sunxi-with-spl.bin of=/dev/sdx bs=8k seek=1 You can partition the microSD card, but leave the first MB unallocated (most |