diff options
-rw-r--r-- | README | 2 | ||||
-rw-r--r-- | net/net.c | 4 | ||||
-rw-r--r-- | net/tftp.c | 134 |
3 files changed, 119 insertions, 21 deletions
@@ -788,6 +788,7 @@ The following options need to be configured: CONFIG_CMD_SOURCE "source" command Support CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_TFTPSRV * TFTP transfer in server mode + CONFIG_CMD_TFTPPUT * TFTP put command (upload) CONFIG_CMD_TIME * run command and report execution time CONFIG_CMD_USB * USB support CONFIG_CMD_CDP * Cisco Discover Protocol support @@ -3344,6 +3345,7 @@ bootp - boot image via network using BootP/TFTP protocol tftpboot- boot image via network using TFTP protocol and env variables "ipaddr" and "serverip" (and eventually "gatewayip") +tftpput - upload a file via network using TFTP protocol rarpboot- boot image via network using RARP/TFTP protocol diskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd' loads - load S-Record file over serial line diff --git a/net/net.c b/net/net.c index c778a806561..84f28bf32e1 100644 --- a/net/net.c +++ b/net/net.c @@ -408,6 +408,9 @@ restart: NetBootFileXferSize = 0; switch (protocol) { case TFTPGET: +#ifdef CONFIG_CMD_TFTPPUT + case TFTPPUT: +#endif /* always use ARP to get server ethernet address */ TftpStart(protocol); break; @@ -1794,6 +1797,7 @@ static int net_check_prereq(enum proto_t protocol) case NFS: #endif case TFTPGET: + case TFTPPUT: if (NetServerIP == 0) { puts("*** ERROR: `serverip' not set\n"); return 1; diff --git a/net/tftp.c b/net/tftp.c index 7e3bb3dc24a..961fdd1a455 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -81,6 +81,12 @@ static int TftpTsize; /* The number of hashes we printed */ static short TftpNumchars; #endif +#ifdef CONFIG_CMD_TFTPPUT +static int TftpWriting; /* 1 if writing, else 0 */ +static int TftpFinalBlock; /* 1 if we have sent the last block */ +#else +#define TftpWriting 0 +#endif #define STATE_SEND_RRQ 1 #define STATE_DATA 2 @@ -88,6 +94,7 @@ static short TftpNumchars; #define STATE_BAD_MAGIC 4 #define STATE_OACK 5 #define STATE_RECV_WRQ 6 +#define STATE_SEND_WRQ 7 /* default TFTP block size */ #define TFTP_BLOCK_SIZE 512 @@ -201,6 +208,29 @@ void new_transfer(void) #endif } +#ifdef CONFIG_CMD_TFTPPUT +/** + * Load the next block from memory to be sent over tftp. + * + * @param block Block number to send + * @param dst Destination buffer for data + * @param len Number of bytes in block (this one and every other) + * @return number of bytes loaded + */ +static int load_block(unsigned block, uchar *dst, unsigned len) +{ + /* We may want to get the final block from the previous set */ + ulong offset = ((int)block - 1) * len + TftpBlockWrapOffset; + ulong tosend = len; + + tosend = min(NetBootFileXferSize - offset, tosend); + (void)memcpy(dst, (void *)(save_addr + offset), tosend); + debug("%s: block=%d, offset=%ld, len=%d, tosend=%ld\n", __func__, + block, offset, len, tosend); + return tosend; +} +#endif + static void TftpSend(void); static void TftpTimeout(void); @@ -216,9 +246,9 @@ static void show_block_marker(void) putc('#'); TftpNumchars++; } - } + } else #endif - else { + { if (((TftpBlock - 1) % 10) == 0) putc('#'); else if ((TftpBlock % (10 * HASHES_PER_LINE)) == 0) @@ -279,7 +309,7 @@ static void tftp_complete(void) static void TftpSend(void) { - volatile uchar *pkt; + uchar *pkt; volatile uchar *xp; int len = 0; volatile ushort *s; @@ -295,14 +325,15 @@ TftpSend(void) * We will always be sending some sort of packet, so * cobble together the packet headers now. */ - pkt = NetTxPacket + NetEthHdrSize() + IP_HDR_SIZE; + pkt = (uchar *)(NetTxPacket + NetEthHdrSize() + IP_HDR_SIZE); switch (TftpState) { - case STATE_SEND_RRQ: + case STATE_SEND_WRQ: xp = pkt; s = (ushort *)pkt; - *s++ = htons(TFTP_RRQ); + *s++ = htons(TftpState == STATE_SEND_RRQ ? TFTP_RRQ : + TFTP_WRQ); pkt = (uchar *)s; strcpy((char *)pkt, tftp_filename); pkt += strlen(tftp_filename) + 1; @@ -314,8 +345,8 @@ TftpSend(void) debug("send option \"timeout %s\"\n", (char *)pkt); pkt += strlen((char *)pkt) + 1; #ifdef CONFIG_TFTP_TSIZE - memcpy((char *)pkt, "tsize\0000\0", 8); - pkt += 8; + pkt += sprintf((char *)pkt, "tsize%c%lu%c", + 0, NetBootFileXferSize, 0); #endif /* try for more effic. blk size */ pkt += sprintf((char *)pkt, "blksize%c%d%c", @@ -346,9 +377,19 @@ TftpSend(void) case STATE_DATA: xp = pkt; s = (ushort *)pkt; - *s++ = htons(TFTP_ACK); - *s++ = htons(TftpBlock); - pkt = (uchar *)s; + s[0] = htons(TFTP_ACK); + s[1] = htons(TftpBlock); + pkt = (uchar *)(s + 2); +#ifdef CONFIG_CMD_TFTPPUT + if (TftpWriting) { + int toload = TftpBlkSize; + int loaded = load_block(TftpBlock, pkt, toload); + + s[0] = htons(TFTP_DATA); + pkt += loaded; + TftpFinalBlock = (loaded < toload); + } +#endif len = pkt - xp; break; @@ -356,7 +397,8 @@ TftpSend(void) xp = pkt; s = (ushort *)pkt; *s++ = htons(TFTP_ERROR); - *s++ = htons(3); + *s++ = htons(3); + pkt = (uchar *)s; strcpy((char *)pkt, "File too large"); pkt += 14 /*strlen("File too large")*/ + 1; @@ -380,6 +422,15 @@ TftpSend(void) } +static void icmp_handler(unsigned type, unsigned code, unsigned dest, + IPaddr_t sip, unsigned src, uchar *pkt, unsigned len) +{ + if (type == ICMP_NOT_REACH && code == ICMP_NOT_REACH_PORT) { + /* Oh dear the other end has gone away */ + restart("TFTP server died"); + } +} + static void TftpHandler(uchar *pkt, unsigned dest, IPaddr_t sip, unsigned src, unsigned len) @@ -396,7 +447,7 @@ TftpHandler(uchar *pkt, unsigned dest, IPaddr_t sip, unsigned src, return; } if (TftpState != STATE_SEND_RRQ && src != TftpRemotePort && - TftpState != STATE_RECV_WRQ) + TftpState != STATE_RECV_WRQ && TftpState != STATE_SEND_WRQ) return; if (len < 2) @@ -409,8 +460,30 @@ TftpHandler(uchar *pkt, unsigned dest, IPaddr_t sip, unsigned src, switch (ntohs(proto)) { case TFTP_RRQ: + break; + case TFTP_ACK: +#ifdef CONFIG_CMD_TFTPPUT + if (TftpWriting) { + if (TftpFinalBlock) { + tftp_complete(); + } else { + /* + * Move to the next block. We want our block + * count to wrap just like the other end! + */ + int block = ntohs(*s); + int ack_ok = (TftpBlock == block); + + TftpBlock = (unsigned short)(block + 1); + update_block_number(); + if (ack_ok) + TftpSend(); /* Send next data block */ + } + } +#endif break; + default: break; @@ -459,7 +532,14 @@ TftpHandler(uchar *pkt, unsigned dest, IPaddr_t sip, unsigned src, TftpState = STATE_DATA; /* passive.. */ else #endif - TftpSend(); /* Send ACK */ +#ifdef CONFIG_CMD_TFTPPUT + if (TftpWriting) { + /* Get ready to send the first block */ + TftpState = STATE_DATA; + TftpBlock++; + } +#endif + TftpSend(); /* Send ACK or first data block */ break; case TFTP_DATA: if (len < 2) @@ -648,8 +728,8 @@ void TftpStart(enum proto_t protocol) } printf("Using %s device\n", eth_get_name()); - printf("TFTP from server %pI4" - "; our IP address is %pI4", &TftpRemoteIP, &NetOurIP); + printf("TFTP %s server %pI4; our IP address is %pI4", + protocol == TFTPPUT ? "to" : "from", &TftpRemoteIP, &NetOurIP); /* Check if we need to send across this subnet */ if (NetOurGatewayIP && NetOurSubnetMask) { @@ -670,19 +750,31 @@ void TftpStart(enum proto_t protocol) } putc('\n'); - - printf("Load address: 0x%lx\n", load_addr); - - puts("Loading: *\b"); +#ifdef CONFIG_CMD_TFTPPUT + TftpWriting = (protocol == TFTPPUT); + if (TftpWriting) { + printf("Save address: 0x%lx\n", save_addr); + printf("Save size: 0x%lx\n", save_size); + NetBootFileXferSize = save_size; + puts("Saving: *\b"); + TftpState = STATE_SEND_WRQ; + new_transfer(); + } else +#endif + { + printf("Load address: 0x%lx\n", load_addr); + puts("Loading: *\b"); + TftpState = STATE_SEND_RRQ; + } TftpTimeoutCountMax = TftpRRQTimeoutCountMax; NetSetTimeout(TftpTimeoutMSecs, TftpTimeout); NetSetHandler(TftpHandler); + net_set_icmp_handler(icmp_handler); TftpRemotePort = WELL_KNOWN_PORT; TftpTimeoutCount = 0; - TftpState = STATE_SEND_RRQ; /* Use a pseudo-random port unless a specific port is set */ TftpOurPort = 1024 + (get_timer(0) % 3072); |