diff options
98 files changed, 465 insertions, 1025 deletions
@@ -1985,6 +1985,11 @@ CBFS (Coreboot Filesystem) support - This driver adds 4 i2c buses with a fix speed from 100000 and the slave addr 0! + - drivers/i2c/ppc4xx_i2c.c + - activate this driver with CONFIG_SYS_I2C_PPC4XX + - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0 + - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1 + additional defines: CONFIG_SYS_NUM_I2C_BUSES diff --git a/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c b/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c index 48aa75391df..fd458fdc9fb 100644 --- a/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c +++ b/arch/powerpc/cpu/ppc4xx/40x_spd_sdram.c @@ -52,10 +52,6 @@ /* * Set default values */ -#ifndef CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SPEED 50000 -#endif - #define ONE_BILLION 1000000000 #define SDRAM0_CFG_DCE 0x80000000 @@ -158,7 +154,7 @@ long int spd_sdram(int(read_spd)(uint addr)) * Make sure I2C controller is initialized * before continuing. */ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM); } /* Make shure we are using SDRAM */ diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c index 161d274dfff..9c566c19f80 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr.c @@ -62,10 +62,6 @@ /* * Set default values */ -#ifndef CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SPEED 50000 -#endif - #define ONE_BILLION 1000000000 /* @@ -168,7 +164,7 @@ long int spd_sdram(void) { * Make sure I2C controller is initialized * before continuing. */ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM); /* * Read the SPD information using I2C interface. Check to see if the diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c index def7ebf7227..a66973ee77b 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c @@ -459,8 +459,7 @@ phys_size_t initdram(int board_type) */ /* switch to correct I2C bus */ - I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM); /*------------------------------------------------------------------ * Clear out the serial presence detect buffers. diff --git a/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c b/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c index 72c5aec7066..0eafe3e067e 100644 --- a/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c +++ b/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c @@ -56,7 +56,7 @@ static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const arg * First switch to correct I2C bus. This is I2C bus 0 * for all currently available 4xx derivats. */ - I2C_SET_BUS(0); + i2c_set_bus_num(0); #ifdef CONFIG_CMD_EEPROM ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, diff --git a/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c index 3ceab32e437..df9637504a9 100644 --- a/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c @@ -1041,8 +1041,7 @@ phys_size_t initdram(int board_type) * before continuing. */ /* switch to correct I2C bus */ - I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM); /*------------------------------------------------------------------ * Clear out the serial presence detect buffers. diff --git a/arch/powerpc/include/asm/ppc4xx-i2c.h b/arch/powerpc/include/asm/ppc4xx-i2c.h index 0c6c926f731..89de5086eb3 100644 --- a/arch/powerpc/include/asm/ppc4xx-i2c.h +++ b/arch/powerpc/include/asm/ppc4xx-i2c.h @@ -34,24 +34,6 @@ #define IIC_TIMEOUT 1 /* 1 second */ -#if defined(CONFIG_I2C_MULTI_BUS) -#define I2C_BUS_OFFS (i2c_bus_num * 0x100) -#else -#define I2C_BUS_OFFS (0x000) -#endif /* CONFIG_I2C_MULTI_BUS */ - -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define I2C_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS) -#elif defined(CONFIG_440) || defined(CONFIG_405EX) -/* all remaining 440 variants */ -#define I2C_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x00000400 + I2C_BUS_OFFS) -#else -/* all 405 variants */ -#define I2C_BASE_ADDR (0xEF600500 + I2C_BUS_OFFS) -#endif - struct ppc4xx_i2c { u8 mdbuf; u8 res1; diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c index 8b36127e900..a53dac19e5d 100644 --- a/board/csb272/csb272.c +++ b/board/csb272/csb272.c @@ -51,7 +51,7 @@ uchar pll_fs6377_regs[16] = { */ int pll_init(void) { - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(0); return i2c_write(CONFIG_SYS_I2C_PLL_ADDR, 0, 1, (uchar *) pll_fs6377_regs, sizeof(pll_fs6377_regs)); diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 1ada1bc9849..64d43c505d6 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -385,7 +385,6 @@ int last_stage_init(void) return 0; } -#if defined(CONFIG_I2C_MULTI_BUS) /* * read field strength from I2C ADC */ @@ -500,7 +499,6 @@ U_BOOT_CMD( "Initialize USB hub", "" ); -#endif /* CONFIG_I2C_MULTI_BUS */ #define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3 int boot_eeprom_write (unsigned dev_addr, diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c index b66f681eeb7..9834bfd1900 100644 --- a/board/lwmon5/kbd.c +++ b/board/lwmon5/kbd.c @@ -111,7 +111,7 @@ static void kbd_init (void) uchar val, errcd; int i; - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(0); gd->arch.kbd_status = 0; diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c index b203037cf99..655e129f94d 100644 --- a/board/mpl/pip405/pip405.c +++ b/board/mpl/pip405/pip405.c @@ -209,7 +209,7 @@ int board_early_init_f (void) #endif /* Read Serial Presence Detect Information */ - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(0); for (i = 0; i < 128; i++) datain[i] = 127; i2c_read(SPD_EEPROM_ADDRESS,0,1,datain,128); diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c deleted file mode 100644 index 85b63fc558a..00000000000 --- a/board/sandburst/common/ppc440gx_i2c.c +++ /dev/null @@ -1,510 +0,0 @@ -/* - * Copyright (C) 2005 Sandburst Corporation - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Ported from arch/powerpc/cpu/ppc4xx/i2c.c by AS HARNOIS by - * Travis B. Sawyer - * Sandburst Corporation. - */ -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/ppc4xx-i2c.h> -#include <i2c.h> -#include <command.h> -#include "ppc440gx_i2c.h" -#include <asm/io.h> - -#ifdef CONFIG_I2C_BUS1 - -#define IIC_OK 0 -#define IIC_NOK 1 -#define IIC_NOK_LA 2 /* Lost arbitration */ -#define IIC_NOK_ICT 3 /* Incomplete transfer */ -#define IIC_NOK_XFRA 4 /* Transfer aborted */ -#define IIC_NOK_DATA 5 /* No data in buffer */ -#define IIC_NOK_TOUT 6 /* Transfer timeout */ - -#define IIC_TIMEOUT 1 /* 1 second */ -#if defined(CONFIG_SYS_I2C_NOPROBES) -static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES; -#endif - -static struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_REGISTERS_BUS1_BASE_ADDRESS; - -static void _i2c_bus1_reset (void) -{ - int i, status; - - /* Reset status register */ - /* write 1 in SCMP and IRQA to clear these fields */ - out_8 (IIC_STS1, 0x0A); - - /* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */ - out_8 (IIC_EXTSTS1, 0x8F); - __asm__ volatile ("eieio"); - - /* - * Get current state, reset bus - * only if no transfers are pending. - */ - i = 10; - do { - /* Get status */ - status = in_8 (IIC_STS1); - udelay (500); /* 500us */ - i--; - } while ((status & IIC_STS_PT) && (i > 0)); - /* Soft reset controller */ - status = in_8 (IIC_XTCNTLSS1); - out_8 (IIC_XTCNTLSS1, (status | IIC_XTCNTLSS_SRST)); - __asm__ volatile ("eieio"); - - /* make sure where in initial state, data hi, clock hi */ - out_8 (IIC_DIRECTCNTL1, 0xC); - for (i = 0; i < 10; i++) { - if ((in_8 (IIC_DIRECTCNTL1) & 0x3) != 0x3) { - /* clock until we get to known state */ - out_8 (IIC_DIRECTCNTL1, 0x8); /* clock lo */ - udelay (100); /* 100us */ - out_8 (IIC_DIRECTCNTL1, 0xC); /* clock hi */ - udelay (100); /* 100us */ - } else { - break; - } - } - /* send start condition */ - out_8 (IIC_DIRECTCNTL1, 0x4); - udelay (1000); /* 1ms */ - /* send stop condition */ - out_8 (IIC_DIRECTCNTL1, 0xC); - udelay (1000); /* 1ms */ - /* Unreset controller */ - out_8 (IIC_XTCNTLSS1, (status & ~IIC_XTCNTLSS_SRST)); - udelay (1000); /* 1ms */ -} - -void i2c1_init (int speed, int slaveadd) -{ - sys_info_t sysInfo; - unsigned long freqOPB; - int val, divisor; - -#ifdef CONFIG_SYS_I2C_INIT_BOARD - /* call board specific i2c bus reset routine before accessing the */ - /* environment, which might be in a chip on that bus. For details */ - /* about this problem see doc/I2C_Edge_Conditions. */ - i2c_init_board(); -#endif - - /* Handle possible failed I2C state */ - /* FIXME: put this into i2c_init_board()? */ - _i2c_bus1_reset (); - - /* clear lo master address */ - out_8 (IIC_LMADR1, 0); - - /* clear hi master address */ - out_8 (IIC_HMADR1, 0); - - /* clear lo slave address */ - out_8 (IIC_LSADR1, 0); - - /* clear hi slave address */ - out_8 (IIC_HSADR1, 0); - - /* Clock divide Register */ - /* get OPB frequency */ - get_sys_info (&sysInfo); - freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv; - /* set divisor according to freqOPB */ - divisor = (freqOPB - 1) / 10000000; - if (divisor == 0) - divisor = 1; - out_8 (IIC_CLKDIV1, divisor); - - /* no interrupts */ - out_8 (IIC_INTRMSK1, 0); - - /* clear transfer count */ - out_8 (IIC_XFRCNT1, 0); - - /* clear extended control & stat */ - /* write 1 in SRC SRS SWC SWS to clear these fields */ - out_8 (IIC_XTCNTLSS1, 0xF0); - - /* Mode Control Register - Flush Slave/Master data buffer */ - out_8 (IIC_MDCNTL1, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB); - __asm__ volatile ("eieio"); - - - val = in_8(IIC_MDCNTL1); - __asm__ volatile ("eieio"); - - /* Ignore General Call, slave transfers are ignored, - disable interrupts, exit unknown bus state, enable hold - SCL - 100kHz normaly or FastMode for 400kHz and above - */ - - val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL; - if( speed >= 400000 ){ - val |= IIC_MDCNTL_FSM; - } - out_8 (IIC_MDCNTL1, val); - - /* clear control reg */ - out_8 (IIC_CNTL1, 0x00); - __asm__ volatile ("eieio"); - -} - -/* - This code tries to use the features of the 405GP i2c - controller. It will transfer up to 4 bytes in one pass - on the loop. It only does out_8(lbz) to the buffer when it - is possible to do out16(lhz) transfers. - - cmd_type is 0 for write 1 for read. - - addr_len can take any value from 0-255, it is only limited - by the char, we could make it larger if needed. If it is - 0 we skip the address write cycle. - - Typical case is a Write of an addr followd by a Read. The - IBM FAQ does not cover this. On the last byte of the write - we don't set the creg CHT bit, and on the first bytes of the - read we set the RPST bit. - - It does not support address only transfers, there must be - a data part. If you want to write the address yourself, put - it in the data pointer. - - It does not support transfer to/from address 0. - - It does not check XFRCNT. -*/ -static -int i2c_transfer1(unsigned char cmd_type, - unsigned char chip, - unsigned char addr[], - unsigned char addr_len, - unsigned char data[], - unsigned short data_len ) -{ - unsigned char* ptr; - int reading; - int tran,cnt; - int result; - int status; - int i; - uchar creg; - - if( data == 0 || data_len == 0 ){ - /*Don't support data transfer of no length or to address 0*/ - printf( "i2c_transfer: bad call\n" ); - return IIC_NOK; - } - if( addr && addr_len ){ - ptr = addr; - cnt = addr_len; - reading = 0; - }else{ - ptr = data; - cnt = data_len; - reading = cmd_type; - } - - /*Clear Stop Complete Bit*/ - out_8(IIC_STS1,IIC_STS_SCMP); - /* Check init */ - i=10; - do { - /* Get status */ - status = in_8(IIC_STS1); - __asm__ volatile("eieio"); - i--; - } while ((status & IIC_STS_PT) && (i>0)); - - if (status & IIC_STS_PT) { - result = IIC_NOK_TOUT; - return(result); - } - /*flush the Master/Slave Databuffers*/ - out_8(IIC_MDCNTL1, ((in_8(IIC_MDCNTL1))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB)); - /*need to wait 4 OPB clocks? code below should take that long*/ - - /* 7-bit adressing */ - out_8(IIC_HMADR1,0); - out_8(IIC_LMADR1, chip); - __asm__ volatile("eieio"); - - tran = 0; - result = IIC_OK; - creg = 0; - - while ( tran != cnt && (result == IIC_OK)) { - int bc,j; - - /* Control register = - Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start, - Transfer is a sequence of transfers - */ - creg |= IIC_CNTL_PT; - - bc = (cnt - tran) > 4 ? 4 : - cnt - tran; - creg |= (bc-1)<<4; - /* if the real cmd type is write continue trans*/ - if ( (!cmd_type && (ptr == addr)) || ((tran+bc) != cnt) ) - creg |= IIC_CNTL_CHT; - - if (reading) - creg |= IIC_CNTL_READ; - else { - for(j=0; j<bc; j++) { - /* Set buffer */ - out_8(IIC_MDBUF1,ptr[tran+j]); - __asm__ volatile("eieio"); - } - } - out_8(IIC_CNTL1, creg ); - __asm__ volatile("eieio"); - - /* Transfer is in progress - we have to wait for upto 5 bytes of data - 1 byte chip address+r/w bit then bc bytes - of data. - udelay(10) is 1 bit time at 100khz - Doubled for slop. 20 is too small. - */ - i=2*5*8; - do { - /* Get status */ - status = in_8(IIC_STS1); - __asm__ volatile("eieio"); - udelay (10); - i--; - } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR) - && (i>0)); - - if (status & IIC_STS_ERR) { - result = IIC_NOK; - status = in_8 (IIC_EXTSTS1); - /* Lost arbitration? */ - if (status & IIC_EXTSTS_LA) - result = IIC_NOK_LA; - /* Incomplete transfer? */ - if (status & IIC_EXTSTS_ICT) - result = IIC_NOK_ICT; - /* Transfer aborted? */ - if (status & IIC_EXTSTS_XFRA) - result = IIC_NOK_XFRA; - } else if ( status & IIC_STS_PT) { - result = IIC_NOK_TOUT; - } - /* Command is reading => get buffer */ - if ((reading) && (result == IIC_OK)) { - /* Are there data in buffer */ - if (status & IIC_STS_MDBS) { - /* - even if we have data we have to wait 4OPB clocks - for it to hit the front of the FIFO, after that - we can just read. We should check XFCNT here and - if the FIFO is full there is no need to wait. - */ - udelay (1); - for(j=0;j<bc;j++) { - ptr[tran+j] = in_8(IIC_MDBUF1); - __asm__ volatile("eieio"); - } - } else - result = IIC_NOK_DATA; - } - creg = 0; - tran+=bc; - if( ptr == addr && tran == cnt ) { - ptr = data; - cnt = data_len; - tran = 0; - reading = cmd_type; - if( reading ) - creg = IIC_CNTL_RPST; - } - } - return (result); -} - -int i2c_probe1 (uchar chip) -{ - uchar buf[1]; - - buf[0] = 0; - - /* - * What is needed is to send the chip address and verify that the - * address was <ACK>ed (i.e. there was a chip at that address which - * drove the data line low). - */ - return(i2c_transfer1 (1, chip << 1, 0,0, buf, 1) != 0); -} - - -int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len) -{ - uchar xaddr[4]; - int ret; - - if ( alen > 4 ) { - printf ("I2C read: addr len %d not supported\n", alen); - return 1; - } - - if ( alen > 0 ) { - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - } - - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of - * address and the extra bits end up in the "chip address" - * bit slots. This makes a 24WC08 (1Kbyte) chip look like - * four 256 byte chips. - * - * Note that we consider the length of the address field to - * still be one byte because the extra address bits are - * hidden in the chip address. - */ - if( alen > 0 ) - chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); -#endif - if( (ret = i2c_transfer1( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) { - printf( "I2c read: failed %d\n", ret); - return 1; - } - return 0; -} - -int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len) -{ - uchar xaddr[4]; - - if ( alen > 4 ) { - printf ("I2C write: addr len %d not supported\n", alen); - return 1; - - } - if ( alen > 0 ) { - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - } - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of - * address and the extra bits end up in the "chip address" - * bit slots. This makes a 24WC08 (1Kbyte) chip look like - * four 256 byte chips. - * - * Note that we consider the length of the address field to - * still be one byte because the extra address bits are - * hidden in the chip address. - */ - if( alen > 0 ) - chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); -#endif - - return (i2c_transfer1( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0); -} - -/*----------------------------------------------------------------------- - * Read a register - */ -uchar i2c_reg_read1(uchar i2c_addr, uchar reg) -{ - uchar buf; - - i2c_read1(i2c_addr, reg, 1, &buf, (uchar)1); - - return(buf); -} - -/*----------------------------------------------------------------------- - * Write a register - */ -void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write1(i2c_addr, reg, 1, &val, 1); -} - - -int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int j; -#if defined(CONFIG_SYS_I2C_NOPROBES) - int k, skip; -#endif - - puts ("Valid chip addresses:"); - for(j = 0; j < 128; j++) { -#if defined(CONFIG_SYS_I2C_NOPROBES) - skip = 0; - for (k = 0; k < sizeof(i2c_no_probes); k++){ - if (j == i2c_no_probes[k]){ - skip = 1; - break; - } - } - if (skip) - continue; -#endif - if(i2c_probe1(j) == 0) { - printf(" %02X", j); - } - } - putc ('\n'); - -#if defined(CONFIG_SYS_I2C_NOPROBES) - puts ("Excluded chip addresses:"); - for( k = 0; k < sizeof(i2c_no_probes); k++ ) - printf(" %02X", i2c_no_probes[k] ); - putc ('\n'); -#endif - - return 0; -} - -U_BOOT_CMD( - iprobe1, 1, 1, do_i2c1_probe, - "probe to discover valid I2C chip addresses", - "" -); - -#endif /* CONFIG_I2C_BUS1 */ diff --git a/board/sandburst/common/ppc440gx_i2c.h b/board/sandburst/common/ppc440gx_i2c.h deleted file mode 100644 index 7496db48405..00000000000 --- a/board/sandburst/common/ppc440gx_i2c.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2005 Sandburst Corporation - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Ported from i2c driver for ppc4xx by AS HARNOIS by - * Travis B. Sawyer - * Sandburst Corporation - */ -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/ppc4xx-i2c.h> -#include <i2c.h> - -#ifdef CONFIG_HARD_I2C - -#define I2C_BUS1_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500) -#define I2C_REGISTERS_BUS1_BASE_ADDRESS I2C_BUS1_BASE_ADDR -#define IIC_MDBUF1 (&i2c->mdbuf) -#define IIC_SDBUF1 (&i2c->sdbuf) -#define IIC_LMADR1 (&i2c->lmadr) -#define IIC_HMADR1 (&i2c->hmadr) -#define IIC_CNTL1 (&i2c->cntl) -#define IIC_MDCNTL1 (&i2c->mdcntl) -#define IIC_STS1 (&i2c->sts) -#define IIC_EXTSTS1 (&i2c->extsts) -#define IIC_LSADR1 (&i2c->lsadr) -#define IIC_HSADR1 (&i2c->hsadr) -#define IIC_CLKDIV1 (&i2c->clkdiv) -#define IIC_INTRMSK1 (&i2c->intrmsk) -#define IIC_XFRCNT1 (&i2c->xfrcnt) -#define IIC_XTCNTLSS1 (&i2c->xtcntlss) -#define IIC_DIRECTCNTL1 (&i2c->directcntl) - -void i2c1_init (int speed, int slaveadd); -int i2c_probe1 (uchar chip); -int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len); -int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len); -uchar i2c_reg_read1(uchar i2c_addr, uchar reg); -void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val); - -#endif /* CONFIG_HARD_I2C */ diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index 6b910743d52..305e110b174 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -26,7 +26,6 @@ #include <asm/io.h> #include <spd_sdram.h> #include <i2c.h> -#include "ppc440gx_i2c.h" #include "sb_common.h" DECLARE_GLOBAL_DATA_PTR; @@ -84,7 +83,7 @@ unsigned short sbcommon_get_serial_number(void) /* Get the board serial number from eeprom */ /* Initialize I2C */ - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(0); /* Read 256 bytes in EEPROM */ i2c_read (0x50, 0, 1, buff, 0x100); @@ -110,85 +109,87 @@ void sbcommon_fans(void) * Attempt to turn on 2 of the fans... * Need to go through the bridge */ + i2c_set_bus_num(1); puts ("FANS: "); /* select fan4 through the bridge */ - i2c_reg_write1(0x73, /* addr */ - 0x00, /* reg */ - 0x08); /* val = bus 4 */ + i2c_reg_write(0x73, /* addr */ + 0x00, /* reg */ + 0x08); /* val = bus 4 */ /* Turn on FAN 4 */ - i2c_reg_write1(0x2e, - 1, - 0x80); + i2c_reg_write(0x2e, + 1, + 0x80); - i2c_reg_write1(0x2e, - 0, - 0x19); + i2c_reg_write(0x2e, + 0, + 0x19); /* Deselect bus 4 on the bridge */ - i2c_reg_write1(0x73, - 0x00, - 0x00); + i2c_reg_write(0x73, + 0x00, + 0x00); /* select fan3 through the bridge */ - i2c_reg_write1(0x73, /* addr */ - 0x00, /* reg */ - 0x04); /* val = bus 3 */ + i2c_reg_write(0x73, /* addr */ + 0x00, /* reg */ + 0x04); /* val = bus 3 */ /* Turn on FAN 3 */ - i2c_reg_write1(0x2e, - 1, - 0x80); + i2c_reg_write(0x2e, + 1, + 0x80); - i2c_reg_write1(0x2e, - 0, - 0x19); + i2c_reg_write(0x2e, + 0, + 0x19); /* Deselect bus 3 on the bridge */ - i2c_reg_write1(0x73, - 0x00, - 0x00); + i2c_reg_write(0x73, + 0x00, + 0x00); /* select fan2 through the bridge */ - i2c_reg_write1(0x73, /* addr */ - 0x00, /* reg */ - 0x02); /* val = bus 4 */ + i2c_reg_write(0x73, /* addr */ + 0x00, /* reg */ + 0x02); /* val = bus 4 */ /* Turn on FAN 2 */ - i2c_reg_write1(0x2e, - 1, - 0x80); + i2c_reg_write(0x2e, + 1, + 0x80); - i2c_reg_write1(0x2e, - 0, - 0x19); + i2c_reg_write(0x2e, + 0, + 0x19); /* Deselect bus 2 on the bridge */ - i2c_reg_write1(0x73, - 0x00, - 0x00); + i2c_reg_write(0x73, + 0x00, + 0x00); /* select fan1 through the bridge */ - i2c_reg_write1(0x73, /* addr */ - 0x00, /* reg */ - 0x01); /* val = bus 0 */ + i2c_reg_write(0x73, /* addr */ + 0x00, /* reg */ + 0x01); /* val = bus 0 */ /* Turn on FAN 1 */ - i2c_reg_write1(0x2e, - 1, - 0x80); + i2c_reg_write(0x2e, + 1, + 0x80); - i2c_reg_write1(0x2e, - 0, - 0x19); + i2c_reg_write(0x2e, + 0, + 0x19); /* Deselect bus 1 on the bridge */ - i2c_reg_write1(0x73, - 0x00, - 0x00); + i2c_reg_write(0x73, + 0x00, + 0x00); puts ("on\n"); + i2c_set_bus_num(0); return; @@ -319,7 +320,7 @@ void board_get_enetaddr(int macaddr_idx, uchar *enet) if (0 == macaddr_idx) { /* Initialize I2C */ - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(0); /* Read 256 bytes in EEPROM */ i2c_read (0x50, 0, 1, buff, 0x100); diff --git a/board/sandburst/common/sb_common.h b/board/sandburst/common/sb_common.h index e652ba8ed83..5b28244440e 100644 --- a/board/sandburst/common/sb_common.h +++ b/board/sandburst/common/sb_common.h @@ -28,7 +28,6 @@ #include <asm/io.h> #include <spd_sdram.h> #include <i2c.h> -#include "ppc440gx_i2c.h" /* * GPIO Settings diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile index fe9b5147614..d9b317098d0 100644 --- a/board/sandburst/karef/Makefile +++ b/board/sandburst/karef/Makefile @@ -40,8 +40,7 @@ CFLAGS += -DBUILDUSER='"$(BUILDUSER)"' LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \ - ../common/sb_common.o +COBJS = $(BOARD).o ../common/flash.o ../common/sb_common.o SOBJS = init.o diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c index 186998d1dfc..d156844ea95 100644 --- a/board/sandburst/karef/karef.c +++ b/board/sandburst/karef/karef.c @@ -337,11 +337,6 @@ int checkboard (void) ************************************************************************/ int misc_init_f (void) { - /* Turn on i2c bus 1 */ - puts ("I2C1: "); - i2c1_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - puts ("ready\n"); - /* Turn on fans 3 & 4 */ sbcommon_fans(); diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile index 6019d5963c6..3f19bf2bd69 100644 --- a/board/sandburst/metrobox/Makefile +++ b/board/sandburst/metrobox/Makefile @@ -39,8 +39,7 @@ CFLAGS += -DBUILDUSER='"$(BUILDUSER)"' LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \ - ../common/sb_common.o +COBJS = $(BOARD).o ../common/flash.o ../common/sb_common.o SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c index 76d8293fd67..ce4a0296ec1 100644 --- a/board/sandburst/metrobox/metrobox.c +++ b/board/sandburst/metrobox/metrobox.c @@ -30,7 +30,6 @@ #include <asm/io.h> #include <spd_sdram.h> #include <i2c.h> -#include "../common/ppc440gx_i2c.h" #include "../common/sb_common.h" #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) || \ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) @@ -305,11 +304,6 @@ int checkboard (void) ************************************************************************/ int misc_init_f (void) { - /* Turn on i2c bus 1 */ - puts ("I2C1: "); - i2c1_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - puts ("ready\n"); - /* Turn on fans */ sbcommon_fans(); diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index e1da58d7bc1..360f93edf7d 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -36,7 +36,6 @@ COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o -COBJS-$(CONFIG_PPC4XX_I2C) += ppc4xx_i2c.o COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o @@ -45,6 +44,7 @@ COBJS-$(CONFIG_SH_I2C) += sh_i2c.o COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o COBJS-$(CONFIG_SYS_I2C) += i2c_core.o COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o +COBJS-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o COBJS-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o COBJS-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o diff --git a/drivers/i2c/ppc4xx_i2c.c b/drivers/i2c/ppc4xx_i2c.c index 53fedd594cb..c924874b599 100644 --- a/drivers/i2c/ppc4xx_i2c.c +++ b/drivers/i2c/ppc4xx_i2c.c @@ -32,27 +32,29 @@ #include <i2c.h> #include <asm/io.h> -#ifdef CONFIG_HARD_I2C - DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_I2C_MULTI_BUS) -/* - * Initialize the bus pointer to whatever one the SPD EEPROM is on. - * Default is bus 0. This is necessary because the DDR initialization - * runs from ROM, and we can't switch buses because we can't modify - * the global variables. - */ -#ifndef CONFIG_SYS_SPD_BUS_NUM -#define CONFIG_SYS_SPD_BUS_NUM 0 +static inline struct ppc4xx_i2c *ppc4xx_get_i2c(int hwadapnr) +{ + unsigned long base; + +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) + base = CONFIG_SYS_PERIPHERAL_BASE + 0x00000700 + (hwadapnr * 0x100); +#elif defined(CONFIG_440) || defined(CONFIG_405EX) +/* all remaining 440 variants */ + base = CONFIG_SYS_PERIPHERAL_BASE + 0x00000400 + (hwadapnr * 0x100); +#else +/* all 405 variants */ + base = 0xEF600500 + (hwadapnr * 0x100); #endif -static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = - CONFIG_SYS_SPD_BUS_NUM; -#endif /* CONFIG_I2C_MULTI_BUS */ + return (struct ppc4xx_i2c *)base; +} -static void _i2c_bus_reset(void) +static void _i2c_bus_reset(struct i2c_adapter *adap) { - struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; + struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr); int i; u8 dc; @@ -91,11 +93,10 @@ static void _i2c_bus_reset(void) out_8(&i2c->xtcntlss, 0); } -void i2c_init(int speed, int slaveaddr) +static void ppc4xx_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) { - struct ppc4xx_i2c *i2c; + struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr); int val, divisor; - int bus; #ifdef CONFIG_SYS_I2C_INIT_BOARD /* @@ -106,67 +107,57 @@ void i2c_init(int speed, int slaveaddr) i2c_init_board(); #endif - for (bus = 0; bus < CONFIG_SYS_MAX_I2C_BUS; bus++) { - I2C_SET_BUS(bus); - - /* Set i2c pointer after calling I2C_SET_BUS() */ - i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; - - /* Handle possible failed I2C state */ - /* FIXME: put this into i2c_init_board()? */ - _i2c_bus_reset(); + /* Handle possible failed I2C state */ + /* FIXME: put this into i2c_init_board()? */ + _i2c_bus_reset(adap); - /* clear lo master address */ - out_8(&i2c->lmadr, 0); + /* clear lo master address */ + out_8(&i2c->lmadr, 0); - /* clear hi master address */ - out_8(&i2c->hmadr, 0); - - /* clear lo slave address */ - out_8(&i2c->lsadr, 0); + /* clear hi master address */ + out_8(&i2c->hmadr, 0); - /* clear hi slave address */ - out_8(&i2c->hsadr, 0); + /* clear lo slave address */ + out_8(&i2c->lsadr, 0); - /* Clock divide Register */ - /* set divisor according to freq_opb */ - divisor = (get_OPB_freq() - 1) / 10000000; - if (divisor == 0) - divisor = 1; - out_8(&i2c->clkdiv, divisor); + /* clear hi slave address */ + out_8(&i2c->hsadr, 0); - /* no interrupts */ - out_8(&i2c->intrmsk, 0); + /* Clock divide Register */ + /* set divisor according to freq_opb */ + divisor = (get_OPB_freq() - 1) / 10000000; + if (divisor == 0) + divisor = 1; + out_8(&i2c->clkdiv, divisor); - /* clear transfer count */ - out_8(&i2c->xfrcnt, 0); + /* no interrupts */ + out_8(&i2c->intrmsk, 0); - /* clear extended control & stat */ - /* write 1 in SRC SRS SWC SWS to clear these fields */ - out_8(&i2c->xtcntlss, 0xF0); + /* clear transfer count */ + out_8(&i2c->xfrcnt, 0); - /* Mode Control Register - Flush Slave/Master data buffer */ - out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB); + /* clear extended control & stat */ + /* write 1 in SRC SRS SWC SWS to clear these fields */ + out_8(&i2c->xtcntlss, 0xF0); - val = in_8(&i2c->mdcntl); + /* Mode Control Register + Flush Slave/Master data buffer */ + out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB); - /* Ignore General Call, slave transfers are ignored, - * disable interrupts, exit unknown bus state, enable hold - * SCL 100kHz normaly or FastMode for 400kHz and above - */ + val = in_8(&i2c->mdcntl); - val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL; - if (speed >= 400000) - val |= IIC_MDCNTL_FSM; - out_8(&i2c->mdcntl, val); + /* Ignore General Call, slave transfers are ignored, + * disable interrupts, exit unknown bus state, enable hold + * SCL 100kHz normaly or FastMode for 400kHz and above + */ - /* clear control reg */ - out_8(&i2c->cntl, 0x00); - } + val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL; + if (speed >= 400000) + val |= IIC_MDCNTL_FSM; + out_8(&i2c->mdcntl, val); - /* set to SPD bus as default bus upon powerup */ - I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM); + /* clear control reg */ + out_8(&i2c->cntl, 0x00); } /* @@ -194,14 +185,15 @@ void i2c_init(int speed, int slaveaddr) * * It does not check XFRCNT. */ -static int i2c_transfer(unsigned char cmd_type, +static int _i2c_transfer(struct i2c_adapter *adap, + unsigned char cmd_type, unsigned char chip, unsigned char addr[], unsigned char addr_len, unsigned char data[], unsigned short data_len) { - struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; + struct ppc4xx_i2c *i2c = ppc4xx_get_i2c(adap->hwadapnr); u8 *ptr; int reading; int tran, cnt; @@ -345,7 +337,7 @@ static int i2c_transfer(unsigned char cmd_type, return result; } -int i2c_probe(uchar chip) +static int ppc4xx_i2c_probe(struct i2c_adapter *adap, uchar chip) { uchar buf[1]; @@ -356,11 +348,11 @@ int i2c_probe(uchar chip) * address was <ACK>ed (i.e. there was a chip at that address which * drove the data line low). */ - return (i2c_transfer(1, chip << 1, 0, 0, buf, 1) != 0); + return (_i2c_transfer(adap, 1, chip << 1, 0, 0, buf, 1) != 0); } -static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, - int len, int read) +static int ppc4xx_i2c_transfer(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len, int read) { uchar xaddr[4]; int ret; @@ -394,43 +386,50 @@ static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif - if ((ret = i2c_transfer(read, chip << 1, &xaddr[4 - alen], alen, - buffer, len)) != 0) { + ret = _i2c_transfer(adap, read, chip << 1, &xaddr[4 - alen], alen, + buffer, len); + if (ret) { printf("I2C %s: failed %d\n", read ? "read" : "write", ret); - return 1; } return 0; } -int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len) +static int ppc4xx_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) { - return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 1); + return ppc4xx_i2c_transfer(adap, chip, addr, alen, buffer, len, 1); } -int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len) +static int ppc4xx_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) { - return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 0); + return ppc4xx_i2c_transfer(adap, chip, addr, alen, buffer, len, 0); } -#if defined(CONFIG_I2C_MULTI_BUS) -/* - * Functions for multiple I2C bus handling - */ -unsigned int i2c_get_bus_num(void) +static unsigned int ppc4xx_i2c_set_bus_speed(struct i2c_adapter *adap, + unsigned int speed) { - return i2c_bus_num; -} - -int i2c_set_bus_num(unsigned int bus) -{ - if (bus >= CONFIG_SYS_MAX_I2C_BUS) + if (speed != adap->speed) return -1; - - i2c_bus_num = bus; - - return 0; + return speed; } -#endif /* CONFIG_I2C_MULTI_BUS */ -#endif /* CONFIG_HARD_I2C */ + +/* + * Register ppc4xx i2c adapters + */ +#ifdef CONFIG_SYS_I2C_PPC4XX_CH0 +U_BOOT_I2C_ADAP_COMPLETE(ppc4xx_0, ppc4xx_i2c_init, ppc4xx_i2c_probe, + ppc4xx_i2c_read, ppc4xx_i2c_write, + ppc4xx_i2c_set_bus_speed, + CONFIG_SYS_I2C_PPC4XX_SPEED_0, + CONFIG_SYS_I2C_PPC4XX_SLAVE_0, 0) +#endif +#ifdef CONFIG_SYS_I2C_PPC4XX_CH1 +U_BOOT_I2C_ADAP_COMPLETE(ppc4xx_1, ppc4xx_i2c_init, ppc4xx_i2c_probe, + ppc4xx_i2c_read, ppc4xx_i2c_write, + ppc4xx_i2c_set_bus_speed, + CONFIG_SYS_I2C_PPC4XX_SPEED_1, + CONFIG_SYS_I2C_PPC4XX_SLAVE_1, 1) +#endif diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 1e392290d70..8ba5d6315cf 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -306,10 +306,11 @@ /* * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 35c37731cbc..6d40748d0e6 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -247,10 +247,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h index fd3eff0c1f4..b805fbd58a5 100644 --- a/include/configs/CANBT.h +++ b/include/configs/CANBT.h @@ -180,14 +180,14 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC08) for environment */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ /* mask of address bits that overflow into the "EEPROM chip address" */ #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 7017f8c19b1..e56b2474aa0 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -402,10 +402,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 686d15883c7..ca258e6b29d 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -226,10 +226,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index bbd93ac5020..bac51d10ec3 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -211,10 +211,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 36476e0135b..bb2e92f9fb7 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -260,10 +260,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC08) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 4c12c85c2b2..a442e365668 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -287,10 +287,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 96b6c0ab669..f2422c5925e 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -263,10 +263,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC32) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC32 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index c4cc5fd7375..3f072d34af2 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -282,10 +282,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index 78c66c76a77..93854188392 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -196,10 +196,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC08) for environment */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 6bceccbc14b..37139edd660 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -76,11 +76,12 @@ #define CONFIG_SERVERIP 10.0.0.1 #define CONFIG_ETHADDR 00:40:a6:80:14:5 */ -#define CONFIG_HARD_I2C 1 /* hardware support for i2c */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 #define CONFIG_SDRAM_BANK0 1 -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_IDENT_STRING "Cray L1" diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 6d67d6ee406..fa09797596a 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -178,10 +178,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 24df85a8854..26162d1a436 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -197,10 +197,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC08) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 152821f5676..72f6a310361 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -170,18 +170,20 @@ /* * I2C */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_PPC4XX_CH1 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F #define CONFIG_SYS_SPD_BUS_NUM 0 #define IIC1_MCP3021_ADDR 0x4d #define IIC1_USB2507_ADDR 0x2c -#ifdef CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_NOPROBES {{1, IIC1_USB2507_ADDR}} -#endif +#define CONFIG_SYS_I2C_NOPROBES { {1, IIC1_USB2507_ADDR} } + #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/G2000.h b/include/configs/G2000.h index b6769ae68dc..93be37fe46e 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -298,10 +298,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */ /* CAT24WC08/16... */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index d65377f5800..7ca4212526c 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -334,14 +334,15 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 #if 0 /* test-only */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #else -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 #endif -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */ #define CONFIG_SYS_EEPROM_WREN 1 diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index e90782f56a9..ecfc4aa0a77 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -246,10 +246,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 76509be0485..271ebdacaf2 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -210,10 +210,11 @@ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F /*----------------------------------------------------------------------- diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 5736fcfa102..43ecf5db498 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -133,13 +133,15 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */ - +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_PPC4XX_CH1 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */ +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F +#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */ /*----------------------------------------------------------------------- * Environment diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index 66c4798b5f7..074425110cb 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -195,13 +195,15 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed 400kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CONFIG_I2C_BUS1 1 /* Include i2c bus 1 supp */ - +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_PPC4XX_CH1 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */ +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F +#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */ /*----------------------------------------------------------------------- * Environment diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 0d023ab9fbe..7b4d275b80f 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -98,10 +98,11 @@ * The Atmel EEPROM uses 16Bit addressing. ***************************************************************/ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 50000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 /* EEPROM 24C128/256 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index 4a934176550..1c1568702f1 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -217,10 +217,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC08) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index cd1f4254ad5..eda8af287b0 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -213,10 +213,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC08) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index c3cacefed8c..54c8bb23b00 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -209,10 +209,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 3757af07a00..148fb190cdc 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -87,10 +87,11 @@ * EEPROM of the SDRAM * The Atmel EEPROM uses 16Bit addressing. ***************************************************************/ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 50000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 1745eb39fc8..74bd97d0426 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -281,10 +281,11 @@ /* * I2C EEPROM (24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24WC16 */ #define CONFIG_SYS_EEPROM_WREN 1 diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index d97acecc441..19583b66b41 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -239,10 +239,11 @@ /* * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24W16 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index a4275512816..33c39f89181 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -217,10 +217,11 @@ /* * I2C EEPROM (24W16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24W16 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 4b531828f58..867f57866ff 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -225,12 +225,14 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_PPC4XX_CH1 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F #define CONFIG_SYS_I2C_MULTI_EEPROMS diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 210bc30ca89..a705f1c4e6d 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -419,10 +419,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 8f0c4b62417..98d975fbd26 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -280,10 +280,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */ #define CONFIG_SYS_EEPROM_WREN 1 diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index 43d6bb31fd4..85722e408d6 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -205,10 +205,11 @@ /* * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 710812fc9f3..7c5be407699 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -279,10 +279,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC08) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index f88dfe4cde6..41057d01c15 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -286,10 +286,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (ATMEL 24C04N) */ -#define CONFIG_HARD_I2C 1 /* Hardware assisted I2C */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM ATMEL 24C04N */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index 0c78acac806..2632db25bd6 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -244,10 +244,11 @@ /*----------------------------------------------------------------------- * I2C EEPROM (CAT24WC16) for environment */ -#define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 8c447ca951a..52a64bf4e70 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -206,7 +206,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 9f32a608c0b..13978be1de5 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -121,11 +121,12 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* Don't probe these addrs */ /*----------------------------------------------------------------------- * I2C EEPROM (PCF8594C) diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 80e5735e76c..1dc44fc0b0f 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -42,9 +42,10 @@ /* * I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F /* * Ethernet/EMAC/PHY diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index d36984df2d6..03fa17bb8f8 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -222,7 +222,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/bluestone.h b/include/configs/bluestone.h index 3e691fdcf41..934da8134b7 100644 --- a/include/configs/bluestone.h +++ b/include/configs/bluestone.h @@ -122,7 +122,7 @@ /* * I2C */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 35a473a429d..43059a06f9b 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -134,9 +134,9 @@ * I2C stuff *----------------------------------------------------------------------- */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_NOPROBES { 0x69 } /* avoid i2c probe hangup (why?) */ +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* avoid i2c probe hangup (?) */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ #if defined(CONFIG_CMD_EEPROM) diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index 92106d762de..a3c04b65dcb 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -329,7 +329,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/csb272.h b/include/configs/csb272.h index eec087c0dc3..c12c3a21005 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -175,10 +175,11 @@ * I2C configuration * */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F /* I2C slave address */ /* * MII PHY configuration diff --git a/include/configs/csb472.h b/include/configs/csb472.h index f6a456c18f1..663424b1966 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -174,10 +174,11 @@ * I2C configuration * */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F /* I2C slave address */ /* * MII PHY configuration diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 2cd20279bec..5d6308fb186 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -114,7 +114,7 @@ /* * I2C stuff */ -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 /* Temp sensor/hwmon/dtt */ #define CONFIG_DTT_LM63 1 /* National LM63 */ diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index c490ff67da4..24c9fa42992 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -107,7 +107,7 @@ /* * I2C stuff */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address*/ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 /* * FLASH organization diff --git a/include/configs/ebony.h b/include/configs/ebony.h index b05ba08afda..aabc898464e 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -138,7 +138,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index 7b8bac48ec7..db1fd284351 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -145,7 +145,7 @@ /* * I2C */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed+slave address*/ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 /* * Default environment variables diff --git a/include/configs/icon.h b/include/configs/icon.h index c2da4cec9a6..ba433550079 100644 --- a/include/configs/icon.h +++ b/include/configs/icon.h @@ -120,9 +120,8 @@ /* * I2C */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 -#define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_SPD_BUS_NUM 0 /* The I2C bus for SPD */ #define CONFIG_SYS_I2C_MULTI_EEPROMS diff --git a/include/configs/intip.h b/include/configs/intip.h index ed96b1b3c44..917d214dd1c 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -228,7 +228,7 @@ /* * I2C */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/io.h b/include/configs/io.h index 03661cce2dc..4950ad711d8 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -114,7 +114,7 @@ /* * I2C stuff */ -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 /* Temp sensor/hwmon/dtt */ #define CONFIG_DTT_LM63 1 /* National LM63 */ diff --git a/include/configs/io64.h b/include/configs/io64.h index 887aaefd395..bb29bedb2d2 100644 --- a/include/configs/io64.h +++ b/include/configs/io64.h @@ -340,7 +340,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_PCA9698 1 /* NXP PCA9698 */ diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 695aa5c85ab..5972711574b 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -110,11 +110,11 @@ /* * I2C stuff */ -#undef CONFIG_HARD_I2C #define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 400000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F /* * Software (bit-bang) I2C driver configuration diff --git a/include/configs/katmai.h b/include/configs/katmai.h index c6f712c9378..0bde3929da9 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -119,9 +119,8 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 -#define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_SPD_BUS_NUM 0 /* The I2C bus for SPD */ #define IIC0_BOOTPROM_ADDR 0x50 diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index aec4a584efb..fc34c24a62a 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -385,7 +385,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ diff --git a/include/configs/korat.h b/include/configs/korat.h index eea8c98b6ad..c2e7118b1e5 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -155,10 +155,11 @@ /* * I2C */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/luan.h b/include/configs/luan.h index f0e568af834..6219df70e40 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -134,7 +134,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 4dcb25a9669..7d9378ebbfe 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -298,10 +298,11 @@ /* * I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* RTC */ #define CONFIG_SYS_I2C_EEPROM_CPU_ADDR 0x52 /* EEPROM (CPU Modul) */ diff --git a/include/configs/makalu.h b/include/configs/makalu.h index f71f28bb873..66f35d7799f 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -201,7 +201,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ diff --git a/include/configs/neo.h b/include/configs/neo.h index 38b5becc2ed..be1c9ff5a6a 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -117,7 +117,7 @@ /* * I2C stuff */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 /* RTC */ #define CONFIG_RTC_DS1337 diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index 3e64c7405bf..0bac61168b6 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -151,7 +151,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 3c33da73bb8..9f7642816ce 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -97,11 +97,12 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* Don't probe these addrs */ /*----------------------------------------------------------------------- * I2C RTC diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 6358104c1ab..1104f92482d 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -139,10 +139,11 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa4>>1) #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index 30a8c5519f4..809d7643923 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -152,10 +152,11 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* bytes of address */ diff --git a/include/configs/redwood.h b/include/configs/redwood.h index f75ab678182..355c330c336 100644 --- a/include/configs/redwood.h +++ b/include/configs/redwood.h @@ -110,13 +110,13 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define IIC0_BOOTPROM_ADDR 0x50 #define IIC0_ALT_BOOTPROM_ADDR 0x54 /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54} +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} } #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 4120cf4d2a9..d5eb74563a3 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -168,10 +168,11 @@ #define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 59636f7f77f..27859ee7db4 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -246,15 +246,16 @@ * IIC stuff *----------------------------------------------------------------------- */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 #define I2C_INIT #define I2C_ACTIVE 0 #define I2C_TRISTATE 0 -#define CONFIG_SYS_I2C_SPEED 100000 /* use the standard 100kHz speed */ -#define CONFIG_SYS_I2C_SLAVE 0x7F /* mask valid bits */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F /* mask valid bits */ #define CONFIG_RTC_DS1337 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 11fce53c025..e09069530c6 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -232,7 +232,7 @@ /* * I2C */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index ff2189c2fbc..dfd8db4b1c8 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -319,7 +319,7 @@ /* * I2C */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/taihu.h b/include/configs/taihu.h index a43c3da4a07..d43894c4dee 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -138,9 +138,9 @@ * I2C stuff *----------------------------------------------------------------------- */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_NOPROBES { 0x69 } /* avoid i2c probe hangup (why?) */ +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* avoid i2c probe hangup (?) */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C boot EEPROM (24C02W) */ diff --git a/include/configs/taishan.h b/include/configs/taishan.h index c9f1a9fa244..20989a7fdb2 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -133,7 +133,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #undef CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 diff --git a/include/configs/walnut.h b/include/configs/walnut.h index 219f276a4c5..bb81b2b5872 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -95,7 +95,7 @@ * I2C stuff *----------------------------------------------------------------------- */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index 1f48cc57724..dab7d39af7f 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -145,11 +145,11 @@ extern void out32(unsigned int, unsigned long); /* * I2C */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7f -#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7f /* I2C EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index cde0df1a08f..e814cfd2623 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -137,7 +137,7 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 3282d378d7d..33a82d9269c 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -120,13 +120,13 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define IIC0_BOOTPROM_ADDR 0x50 #define IIC0_ALT_BOOTPROM_ADDR 0x54 /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54} +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} } /* #if defined(CONFIG_CMD_EEPROM) */ /* #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */ diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 75195bc742c..b6539937003 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -168,10 +168,11 @@ /*----------------------------------------------------------------------- * I2C *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F /* these are for the ST M24C02 2kbit serial i2c eeprom */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ |