diff options
| -rw-r--r-- | CHANGELOG | 8 | ||||
| -rw-r--r-- | Makefile | 4 | ||||
| -rw-r--r-- | board/amcc/sequoia/u-boot-nand.lds | 8 | ||||
| -rw-r--r-- | common/env_nand.c | 50 | ||||
| -rw-r--r-- | common/environment.c | 3 | ||||
| -rw-r--r-- | doc/README.nand-boot-ppc440 | 24 | ||||
| -rw-r--r-- | include/configs/sequoia.h | 27 | ||||
| -rw-r--r-- | include/environment.h | 4 | ||||
| -rw-r--r-- | nand_spl/board/amcc/sequoia/Makefile | 4 | ||||
| -rw-r--r-- | nand_spl/nand_boot.c | 3 |
10 files changed, 105 insertions, 30 deletions
diff --git a/CHANGELOG b/CHANGELOG index 4e9cf16489a..786f01b64ed 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,9 +2,15 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add NAND environment support for PPC440EPx Sequoia NAND boot config + Patch by Stefan Roese, 12 Sep 2006 + +* Update NAND boot documentation + Patch by Stefan Roese, 12 Sep 2006 + * Fix alignment problem in "mtdparts" command -* Add documentation on the latest build environment extensions to +* Add documentation on the latest build environment extensions to the README file. * Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory. @@ -78,7 +78,7 @@ saved-output := $(BUILD_DIR) # Attempt to create a output directory. $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) -# Verify if it was successful. +# Verify if it was successful. BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) endif # ifneq ($(BUILD_DIR),) @@ -272,7 +272,7 @@ $(NAND_SPL): version $(MAKE) -C nand_spl all $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin - cat nand_spl/u-boot-spl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin + cat nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin version: @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \ diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds index c3d3d968fed..cf2e2b55812 100644 --- a/board/amcc/sequoia/u-boot-nand.lds +++ b/board/amcc/sequoia/u-boot-nand.lds @@ -1,5 +1,5 @@ /* - * (C) Copyright 2002 + * (C) Copyright 2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -56,6 +56,12 @@ SECTIONS cpu/ppc4xx/start.o (.text) + /* Align to next NAND block */ + . = ALIGN(0x4000); + common/environment.o (.ppcenv) + /* Keep some space here for redundant env and potential bad env blocks */ + . = ALIGN(0x10000); + *(.text) *(.fixup) *(.got1) diff --git a/common/env_nand.c b/common/env_nand.c index 0a05b09a7a8..67c4a4e0117 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -2,7 +2,7 @@ * (C) Copyright 2004 * Jian Zhang, Texas Instruments, jzhang@ti.com. - * (C) Copyright 2000-2004 + * (C) Copyright 2000-2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> @@ -76,7 +76,9 @@ env_t *env_ptr = 0; /* local functions */ +#if !defined(ENV_IS_EMBEDDED) static void use_default(void); +#endif DECLARE_GLOBAL_DATA_PTR; @@ -91,11 +93,55 @@ uchar env_get_char_spec (int index) * Mark it OK for now. env_relocate() in env_common.c * will call our relocate function which will does * the real validation. + * + * When using a NAND boot image (like sequoia_nand), the environment + * can be embedded or attached to the U-Boot image in NAND flash. This way + * the SPL loads not only the U-Boot image from NAND but also the + * environment. */ int env_init(void) { +#if defined(ENV_IS_EMBEDDED) + ulong total; + int crc1_ok = 0, crc2_ok = 0; + env_t *tmp_env1, *tmp_env2; + + total = CFG_ENV_SIZE; + + tmp_env1 = env_ptr; + tmp_env2 = (env_t *)((ulong)env_ptr + CFG_ENV_SIZE); + + crc1_ok = (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc); + crc2_ok = (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc); + + if (!crc1_ok && !crc2_ok) + gd->env_valid = 0; + else if(crc1_ok && !crc2_ok) + gd->env_valid = 1; + else if(!crc1_ok && crc2_ok) + gd->env_valid = 2; + else { + /* both ok - check serial */ + if(tmp_env1->flags == 255 && tmp_env2->flags == 0) + gd->env_valid = 2; + else if(tmp_env2->flags == 255 && tmp_env1->flags == 0) + gd->env_valid = 1; + else if(tmp_env1->flags > tmp_env2->flags) + gd->env_valid = 1; + else if(tmp_env2->flags > tmp_env1->flags) + gd->env_valid = 2; + else /* flags are equal - almost impossible */ + gd->env_valid = 1; + } + + if (gd->env_valid == 1) + env_ptr = tmp_env1; + else if (gd->env_valid == 2) + env_ptr = tmp_env2; +#else /* ENV_IS_EMBEDDED */ gd->env_addr = (ulong)&default_environment[0]; gd->env_valid = 1; +#endif /* ENV_IS_EMBEDDED */ return (0); } @@ -236,6 +282,7 @@ void env_relocate_spec (void) } #endif /* CFG_ENV_OFFSET_REDUND */ +#if !defined(ENV_IS_EMBEDDED) static void use_default() { puts ("*** Warning - bad CRC or NAND, using default environment\n\n"); @@ -253,5 +300,6 @@ static void use_default() gd->env_valid = 1; } +#endif #endif /* CFG_ENV_IS_IN_NAND */ diff --git a/common/environment.c b/common/environment.c index 81471ce71cd..19bdeb0f62a 100644 --- a/common/environment.c +++ b/common/environment.c @@ -60,7 +60,8 @@ defined(CONFIG_RRVISION) || \ defined(CONFIG_TRAB) || \ defined(CONFIG_PPCHAMELEONEVB) || \ - defined(CONFIG_M5271EVB)) && \ + defined(CONFIG_M5271EVB) || \ + defined(CONFIG_NAND_U_BOOT)) && \ defined(ENV_CRC) /* Environment embedded in U-Boot .ppcenv section */ /* XXX - This only works with GNU C */ # define __PPCENV__ __attribute__ ((section(".ppcenv"))) diff --git a/doc/README.nand-boot-ppc440 b/doc/README.nand-boot-ppc440 index a82a10ee6a5..a1c1d8c4447 100644 --- a/doc/README.nand-boot-ppc440 +++ b/doc/README.nand-boot-ppc440 @@ -33,4 +33,28 @@ is set up. While still running from cache, I experienced problems accessing the NAND controller. +Example: Build and install NAND boot image for Sequoia (440EPx): + +a) Configure for sequoia with NAND boot support: +# make sequoia_nand_config + +b) Build image(s) +# make + +This will generate the SPL image in the "nand_spl" directory: +nand_spl/u-boot-spl.bin +Also another image is created spanning a whole NAND block (16kBytes): +nand_spl/u-boot-spl-16k.bin +The main NAND U-Boot image is generated in the toplevel directory: +u-boot.bin +A combined image of u-boot-spl-16k.bin and u-boot.bin is also created: +u-boot-nand.bin + +This image should be programmed at offset 0 in the NAND flash: + +# tftp 100000 /tftpboot/sequoia/u-boot-nand.bin +# nand erase 0 60000 +# nand write 100000 0 60000 + + September 07 2006, Stefan Roese <sr@denx.de> diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index d3fcc032aa5..639765d5990 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -69,14 +69,9 @@ /*----------------------------------------------------------------------- * Initial RAM & stack pointer *----------------------------------------------------------------------*/ -#if 0 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ -#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */ -#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ -#else #define CFG_INIT_RAM_OCM 1 /* OCM as init ram */ #define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ -#endif #define CFG_INIT_RAM_END (4 << 10) #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ @@ -98,18 +93,11 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or EEPROM). - * Note: DENX encourages to use redundant environment in FLASH. - */ -#if 1 /* test-only */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else #define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ #endif -#if 0 -#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#endif /*----------------------------------------------------------------------- * FLASH related @@ -189,8 +177,12 @@ #undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ #ifdef CFG_ENV_IS_IN_NAND -#define CFG_ENV_SIZE 0x4000 -#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_NAND_U_BOOT_SIZE) +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) #endif @@ -214,11 +206,6 @@ #define CFG_EEPROM_PAGE_WRITE_BITS 3 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 -#ifdef CFG_ENV_IS_IN_EEPROM -#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */ -#define CFG_ENV_OFFSET 0x0 -#endif /* CFG_ENV_IS_IN_EEPROM */ - /* I2C SYSMON (LM75, AD7414 is almost compatible) */ #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ #define CONFIG_DTT_AD7414 1 /* use AD7414 */ diff --git a/include/environment.h b/include/environment.h index 422f800897f..26b07120da1 100644 --- a/include/environment.h +++ b/include/environment.h @@ -79,6 +79,10 @@ # ifdef CFG_ENV_OFFSET_REDUND # define CFG_REDUNDAND_ENVIRONMENT # endif +# if defined(CONFIG_NAND_U_BOOT) +/* Use embedded environment in NAND boot versions */ +# define ENV_IS_EMBEDDED 1 +# endif #endif /* CFG_ENV_IS_IN_NAND */ diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile index 6c07e3dd8df..897aa8b6b70 100644 --- a/nand_spl/board/amcc/sequoia/Makefile +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -35,11 +35,11 @@ COBJS = nand_boot.o ndfc.o sdram.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -ALL = u-boot-spl u-boot-spl.bin u-boot-spl-4k.bin +ALL = u-boot-spl u-boot-spl.bin u-boot-spl-16k.bin all: $(obj).depend $(ALL) -u-boot-spl-4k.bin: u-boot-spl +u-boot-spl-16k.bin: u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ u-boot-spl.bin: u-boot-spl diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index 6e3af13939f..21abb09e39b 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -166,8 +166,7 @@ void nand_boot(void) /* * Load U-Boot image from NAND into RAM */ - ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, - CFG_NAND_U_BOOT_SIZE, + ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE, (uchar *)CFG_NAND_U_BOOT_DST); /* |