diff options
| -rw-r--r-- | board/freescale/mpc837xemds/mpc837xemds.c | 23 | ||||
| -rw-r--r-- | cpu/mpc83xx/cpu.c | 14 | ||||
| -rw-r--r-- | include/asm-ppc/immap_83xx.h | 2 | ||||
| -rw-r--r-- | include/configs/MPC837XEMDS.h | 15 | ||||
| -rw-r--r-- | include/mpc83xx.h | 3 |
5 files changed, 52 insertions, 5 deletions
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index 156d8089a11..062d762d2c3 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -23,6 +23,7 @@ int board_early_init_f(void) { + struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR; u8 *bcsr = (u8 *)CONFIG_SYS_BCSR; /* Enable flash write */ @@ -30,6 +31,18 @@ int board_early_init_f(void) /* Clear all of the interrupt of BCSR */ bcsr[0xe] = 0xff; +#ifdef CONFIG_MMC + /* Set SPI_SD, SER_SD, and IRQ4_WP so that SD signals go through */ + bcsr[0xc] |= 0x4c; + + /* Set proper bits in SICR to allow SD signals through */ + clrsetbits_be32(&im->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD); + + clrsetbits_be32(&im->sysconf.sicrh, (SICRH_GPIO2_E | SICRH_SPI), + (SICRH_GPIO2_E_SD | SICRH_SPI_SD)); + +#endif + #ifdef CONFIG_FSL_SERDES immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; u32 spridr = in_be32(&immr->sysconf.spridr); @@ -38,21 +51,21 @@ int board_early_init_f(void) switch (PARTID_NO_E(spridr)) { case SPR_8377: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, - FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; case SPR_8378: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SGMII, - FSL_SERDES_CLK_125, FSL_SERDES_VDD_1V); + FSL_SERDES_CLK_125, FSL_SERDES_VDD_1V); break; case SPR_8379: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, - FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, - FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; default: printf("serdes not configured: unknown CPU part number: " - "%04x\n", spridr >> 16); + "%04x\n", spridr >> 16); break; } #endif /* CONFIG_FSL_SERDES */ diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 587fca323bb..9e0a05d6151 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -34,6 +34,7 @@ #include <libfdt.h> #include <tsec.h> #include <netdev.h> +#include <fsl_esdhc.h> DECLARE_GLOBAL_DATA_PTR; @@ -385,3 +386,16 @@ int cpu_eth_init(bd_t *bis) #endif return 0; } + +/* + * Initializes on-chip MMC controllers. + * to override, implement board_mmc_init() + */ +int cpu_mmc_init(bd_t *bis) +{ +#ifdef CONFIG_FSL_ESDHC + return fsl_esdhc_mmc_init(bis); +#else + return 0; +#endif +} diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 77c09db6b89..7b847f80225 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -895,4 +895,6 @@ typedef struct immap { } immap_t; #endif +#define CONFIG_SYS_MPC83xx_ESDHC_OFFSET (0x2e000) +#define CONFIG_SYS_MPC83xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET) #endif /* __IMMAP_83xx__ */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 0dd6ef52f40..75b67b45907 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -319,6 +319,9 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 +#define CONFIG_SYS_64BIT_STRTOUL 1 +#define CONFIG_SYS_64BIT_VSPRINTF 1 + /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ @@ -502,6 +505,18 @@ extern int board_pci_host_broken(void); #undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CONFIG_MMC 1 + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* * Miscellaneous configurable options */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 191488aa899..3554fdd4ed9 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -266,6 +266,7 @@ /* SICRL bits - MPC837x specific */ #define SICRL_USB_A 0xC0000000 #define SICRL_USB_B 0x30000000 +#define SICRL_USB_B_SD 0x20000000 #define SICRL_UART 0x0C000000 #define SICRL_GPIO_A 0x02000000 #define SICRL_GPIO_B 0x01000000 @@ -307,10 +308,12 @@ #define SICRH_GPIO2_C 0x00002000 #define SICRH_GPIO2_D 0x00001000 #define SICRH_GPIO2_E 0x00000C00 +#define SICRH_GPIO2_E_SD 0x00000800 #define SICRH_GPIO2_F 0x00000300 #define SICRH_GPIO2_G 0x000000C0 #define SICRH_GPIO2_H 0x00000030 #define SICRH_SPI 0x00000003 +#define SICRH_SPI_SD 0x00000001 #endif /* SWCRR - System Watchdog Control Register |