diff options
57 files changed, 1559 insertions, 774 deletions
@@ -408,6 +408,10 @@ LIST_85xx=" \ PM856 \ sbc8540 \ sbc8548 \ + sbc8548_PCI_33 \ + sbc8548_PCI_66 \ + sbc8548_PCI_33_PCIE \ + sbc8548_PCI_66_PCIE \ sbc8560 \ socrates \ stxgp3 \ @@ -2448,9 +2448,7 @@ ATUM8548_config: unconfig MPC8536DS_36BIT_config \ MPC8536DS_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -a MPC8536DS ppc mpc85xx mpc8536ds freescale + @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale MPC8540ADS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale @@ -2516,41 +2514,17 @@ MPC8569MDS_config: unconfig MPC8572DS_36BIT_config \ MPC8572DS_config: unconfig - @mkdir -p $(obj)include - @if [ "$(findstring _36BIT_,$@)" ] ; then \ - echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ - $(XECHO) "... enabling 36-bit physical addressing." ; \ - fi - @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale + @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale P2020DS_36BIT_config \ P2020DS_config: unconfig - @mkdir -p $(obj)include - @if [ "$(findstring _36BIT_,$@)" ] ; then \ - echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ - $(XECHO) "... enabling 36-bit physical addressing." ; \ - fi - @$(MKCONFIG) -a P2020DS ppc mpc85xx p2020ds freescale - -P1011RDB_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_P1011" >>$(obj)include/config.h ; - @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale - -P1020RDB_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_P1020" >>$(obj)include/config.h ; - @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale - -P2010RDB_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_P2010" >>$(obj)include/config.h ; - @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale + @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale +P1011RDB_config \ +P1020RDB_config \ +P2010RDB_config \ P2020RDB_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_P2020" >>$(obj)include/config.h ; - @$(MKCONFIG) -a P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale + @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale PM854_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 @@ -2561,29 +2535,19 @@ PM856_config: unconfig sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig - @mkdir -p $(obj)include - @if [ "$(findstring _66_,$@)" ] ; then \ - echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ - $(XECHO) "... 66 MHz PCI" ; \ - else \ - $(XECHO) "... 33 MHz PCI" ; \ - fi - @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560 + @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560 -sbc8548_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548 +sbc8548_config \ +sbc8548_PCI_33_config \ +sbc8548_PCI_66_config \ +sbc8548_PCI_33_PCIE_config \ +sbc8548_PCI_66_PCIE_config: unconfig + @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548 sbc8560_config \ sbc8560_33_config \ sbc8560_66_config: unconfig - @mkdir -p $(obj)include - @if [ "$(findstring _66_,$@)" ] ; then \ - echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ - $(XECHO) "... 66 MHz PCI" ; \ - else \ - $(XECHO) "... 33 MHz PCI" ; \ - fi - @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560 + @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560 socrates_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates diff --git a/board/atum8548/law.c b/board/atum8548/law.c index b70b0910d9e..724b1bf0b69 100644 --- a/board/atum8548/law.c +++ b/board/atum8548/law.c @@ -49,7 +49,7 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1), SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), diff --git a/board/freescale/mpc8536ds/law.c b/board/freescale/mpc8536ds/law.c index 31614d23887..1f11563f5a0 100644 --- a/board/freescale/mpc8536ds/law.c +++ b/board/freescale/mpc8536ds/law.c @@ -31,11 +31,11 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI), SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_PCIE_1), SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_PCIE_2), SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3), + SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_3), SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3), SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), diff --git a/board/freescale/mpc8540ads/law.c b/board/freescale/mpc8540ads/law.c index f5644e15495..4640c1daf5f 100644 --- a/board/freescale/mpc8540ads/law.c +++ b/board/freescale/mpc8540ads/law.c @@ -52,7 +52,7 @@ struct law_entry law_table[] = { /* This is not so much the SDRAM map as it is the whole localbus map. */ SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c index 317ba2696fb..3d308c8e502 100644 --- a/board/freescale/mpc8544ds/law.c +++ b/board/freescale/mpc8544ds/law.c @@ -30,10 +30,10 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_LBC_NONCACHE_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1), SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2), SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), /* contains both PCIE3 MEM & IO space */ SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3), diff --git a/board/freescale/mpc8560ads/law.c b/board/freescale/mpc8560ads/law.c index f5644e15495..4640c1daf5f 100644 --- a/board/freescale/mpc8560ads/law.c +++ b/board/freescale/mpc8560ads/law.c @@ -52,7 +52,7 @@ struct law_entry law_table[] = { /* This is not so much the SDRAM map as it is the whole localbus map. */ SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8572ds/law.c b/board/freescale/mpc8572ds/law.c index 02ea0ec59ed..e13bb533661 100644 --- a/board/freescale/mpc8572ds/law.c +++ b/board/freescale/mpc8572ds/law.c @@ -29,11 +29,11 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2), SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3), + SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_3), SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3), SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index c69934ca62d..933dd127ec9 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -160,189 +160,105 @@ static struct pci_controller pcie2_hose; static struct pci_controller pcie3_hose; #endif -int first_free_busno=0; #ifdef CONFIG_PCI void pci_init_board(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint devdisr = gur->devdisr; - uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; + struct fsl_pci_info pci_info[3]; + u32 devdisr, pordevsr, io_sel, host_agent, temp32; + int first_free_busno = 0; + int num = 0; + + int pcie_ep, pcie_configured; + + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16; debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", devdisr, io_sel, host_agent); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) printf (" eTSEC1 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) printf (" eTSEC2 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) printf (" eTSEC3 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) printf (" eTSEC4 is in sgmii mode.\n"); - + puts("\n"); #ifdef CONFIG_PCIE3 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; - struct pci_controller *hose = &pcie3_hose; - int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent); - int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); - struct pci_region *r = hose->regions; - u32 temp32; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ - printf ("\n PCIE3 connected to ULI as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_MEM_BUS, - CONFIG_SYS_PCIE3_MEM_PHYS, - CONFIG_SYS_PCIE3_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_IO_BUS, - CONFIG_SYS_PCIE3_IO_PHYS, - CONFIG_SYS_PCIE3_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - hose->first_busno=first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - first_free_busno=hose->last_busno+1; - printf (" PCIE3 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - /* - * Activate ULI1575 legacy chip by performing a fake - * memory access. Needed to make ULI RTC work. - * Device 1d has the first on-board memory BAR. - */ - - pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ), - PCI_BASE_ADDRESS_1, &temp32); - if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) { - void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0), - temp32, 4, 0); - debug(" uli1572 read to %p\n", p); - in_be32(p); - } - } else { - printf (" PCIE3: disabled\n"); + pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent); + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ + SET_STD_PCIE_INFO(pci_info[num], 3); + printf (" PCIE3 connected to ULI as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie3_hose, first_free_busno); + /* + * Activate ULI1575 legacy chip by performing a fake + * memory access. Needed to make ULI RTC work. + * Device 1d has the first on-board memory BAR. + */ + pci_hose_read_config_dword(&pcie3_hose, PCI_BDF(2, 0x1d, 0), + PCI_BASE_ADDRESS_1, &temp32); + if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) { + void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0), + temp32, 4, 0); + debug(" uli1572 read to %p\n", p); + in_be32(p); } - + } else { + printf (" PCIE3: disabled\n"); } + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ #endif #ifdef CONFIG_PCIE2 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - struct pci_controller *hose = &pcie2_hose; - int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent); - int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); - struct pci_region *r = hose->regions; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ - printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_MEM_BUS, - CONFIG_SYS_PCIE2_MEM_PHYS, - CONFIG_SYS_PCIE2_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_IO_BUS, - CONFIG_SYS_PCIE2_IO_PHYS, - CONFIG_SYS_PCIE2_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - hose->first_busno=first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - first_free_busno=hose->last_busno+1; - printf (" PCIE2 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - } else { - printf (" PCIE2: disabled\n"); - } - + pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent); + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ + SET_STD_PCIE_INFO(pci_info[num], 2); + printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie2_hose, first_free_busno); + } else { + printf (" PCIE2: disabled\n"); } + + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ #endif -#ifdef CONFIG_PCIE1 - { - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - struct pci_controller *hose = &pcie1_hose; - int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent); - int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - struct pci_region *r = hose->regions; - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_MEM_BUS, - CONFIG_SYS_PCIE1_MEM_PHYS, - CONFIG_SYS_PCIE1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_IO_BUS, - CONFIG_SYS_PCIE1_IO_PHYS, - CONFIG_SYS_PCIE1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - hose->first_busno=first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - first_free_busno=hose->last_busno+1; - printf(" PCIE1 on bus %02x - %02x\n", - hose->first_busno,hose->last_busno); - - } else { - printf (" PCIE1: disabled\n"); - } +#ifdef CONFIG_PCIE1 + pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent); + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); + + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + SET_STD_PCIE_INFO(pci_info[num], 1); + printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie1_hose, first_free_busno); + } else { + printf (" PCIE1: disabled\n"); } + + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ #endif } #endif diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index 98111eb60bd..358148faf2a 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -387,19 +387,7 @@ void pci_init_board(void) void ft_board_setup(void *blob, bd_t *bd) { - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "timebase-frequency", bd->bi_busfreq / 4, 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "bus-frequency", bd->bi_busfreq, 1); - do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "clock-frequency", bd->bi_intfreq, 1); - do_fixup_by_prop_u32(blob, "device_type", "soc", 4, - "bus-frequency", bd->bi_busfreq, 1); - - do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", bd->bi_busfreq, 1); - - fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize); + ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI1 ft_fsl_pci_setup(blob, "pci0", &pci1_hose); diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index d1e659b46b0..37c4b0a3ba9 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -23,10 +23,13 @@ #include <common.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> +#include <asm/processor.h> #include <asm/fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_law.h> +DECLARE_GLOBAL_DATA_PTR; + extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num); @@ -203,24 +206,40 @@ phys_size_t fixed_sdram (void) { sys_info_t sysinfo; char buf[32]; + fsl_ddr_cfg_regs_t *ddr_cfg_regs = NULL; + size_t ddr_size; + struct cpu_type *cpu; get_sys_info(&sysinfo); printf("Configuring DDR for %s MT/s data rate\n", strmhz(buf, sysinfo.freqDDRBus)); if(sysinfo.freqDDRBus <= DATARATE_400MHZ) - fsl_ddr_set_memctl_regs(&ddr_cfg_regs_400, 0); + ddr_cfg_regs = &ddr_cfg_regs_400; else if(sysinfo.freqDDRBus <= DATARATE_533MHZ) - fsl_ddr_set_memctl_regs(&ddr_cfg_regs_533, 0); + ddr_cfg_regs = &ddr_cfg_regs_533; else if(sysinfo.freqDDRBus <= DATARATE_667MHZ) - fsl_ddr_set_memctl_regs(&ddr_cfg_regs_667, 0); + ddr_cfg_regs = &ddr_cfg_regs_667; else if(sysinfo.freqDDRBus <= DATARATE_800MHZ) - fsl_ddr_set_memctl_regs(&ddr_cfg_regs_800, 0); + ddr_cfg_regs = &ddr_cfg_regs_800; else panic("Unsupported DDR data rate %s MT/s data rate\n", strmhz(buf, sysinfo.freqDDRBus)); - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + cpu = gd->cpu; + /* P1020 and it's derivatives support max 32bit DDR width */ + if(cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1020_E || + cpu->soc_ver == SVR_P1011 || cpu->soc_ver == SVR_P1011_E) { + ddr_cfg_regs->ddr_sdram_cfg |= SDRAM_CFG_32_BE; + ddr_cfg_regs->cs[0].bnds = 0x0000001F; + ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2); + } + else + ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + + fsl_ddr_set_memctl_regs(ddr_cfg_regs, 0); + + return ddr_size; } phys_size_t initdram(int board_type) diff --git a/board/freescale/p1_p2_rdb/law.c b/board/freescale/p1_p2_rdb/law.c index 12d2bf478bb..1320d5da041 100644 --- a/board/freescale/p1_p2_rdb/law.c +++ b/board/freescale/p1_p2_rdb/law.c @@ -26,9 +26,9 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2), SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c index a3617d57037..4c08f9efa0b 100644 --- a/board/freescale/p1_p2_rdb/pci.c +++ b/board/freescale/p1_p2_rdb/pci.c @@ -41,60 +41,62 @@ static struct pci_controller pcie2_hose; void pci_init_board(void) { - struct fsl_pci_info pci_info[2]; volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint devdisr = in_be32(&gur->devdisr); - uint io_sel = (in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_IO_SEL) >> 19; - uint host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16; - int num = 0; + struct fsl_pci_info pci_info[2]; + u32 devdisr, pordevsr, io_sel, host_agent; int first_free_busno = 0; + int num = 0; int pcie_ep, pcie_configured; + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16; + debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", devdisr, io_sel, host_agent); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) printf (" eTSEC2 is in sgmii mode.\n"); + puts("\n"); #ifdef CONFIG_PCIE2 - SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent); pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - puts ("\n PCIE2 connected to Slot 1 as "); - printf ("%s (base address %lx)", - pcie_ep ? "End Point": "Root Complex", pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num], + SET_STD_PCIE_INFO(pci_info[num], 2); + printf(" PCIE2 connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); - num++; } else { printf (" PCIE2: disabled\n"); } + puts("\n"); #else - set_bits32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ #endif #ifdef CONFIG_PCIE1 - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent); pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - puts ("\n PCIE1 connected to Slot 2 as "); - printf ("%s (base address %lx)", + SET_STD_PCIE_INFO(pci_info[num], 1); + printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n", pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num], + first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); - num++; } else { printf (" PCIE1: disabled\n"); } + puts("\n"); #else - set_bits32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ #endif } diff --git a/board/freescale/p2020ds/law.c b/board/freescale/p2020ds/law.c index da297c5ab81..28ed2ed5ee8 100644 --- a/board/freescale/p2020ds/law.c +++ b/board/freescale/p2020ds/law.c @@ -29,11 +29,11 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2), SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3), + SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_3), SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3), SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index 7ad9be88c32..e38c0145edc 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -192,69 +192,42 @@ static struct pci_controller pcie2_hose; static struct pci_controller pcie3_hose; #endif -int first_free_busno = 0; - #ifdef CONFIG_PCI void pci_init_board(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint devdisr = gur->devdisr; - uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; + struct fsl_pci_info pci_info[3]; + u32 devdisr, pordevsr, io_sel, host_agent; + int first_free_busno = 0; + int num = 0; - volatile ccsr_fsl_pci_t *pci; - struct pci_controller *hose; int pcie_ep, pcie_configured; - struct pci_region *r; -/* u32 temp32; */ + + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + host_agent = (in_be32(&gur->porbmsr) & MPC85xx_PORBMSR_HA) >> 16; debug(" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", devdisr, io_sel, host_agent); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) printf(" eTSEC2 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) printf(" eTSEC3 is in sgmii mode.\n"); + puts("\n"); #ifdef CONFIG_PCIE2 - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - hose = &pcie2_hose; pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent); pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); - r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) { - printf("\n PCIE2 connected to ULI as %s (base addr %x)", + SET_STD_PCIE_INFO(pci_info[num], 2); + printf(" PCIE2 connected to ULI as %s (base addr %lx)\n", pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug(" with errors. Clearing. Now 0x%08x", - pci->pme_msg_det); - } - printf("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_MEM_BUS, - CONFIG_SYS_PCIE2_MEM_PHYS, - CONFIG_SYS_PCIE2_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_IO_BUS, - CONFIG_SYS_PCIE2_IO_PHYS, - CONFIG_SYS_PCIE2_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - first_free_busno = hose->last_busno+1; - printf(" PCIE2 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie2_hose, first_free_busno); /* * The workaround doesn't work on p2020 because the location @@ -279,104 +252,47 @@ void pci_init_board(void) } else { printf(" PCIE2: disabled\n"); } + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ #endif #ifdef CONFIG_PCIE3 - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; - hose = &pcie3_hose; pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent); pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); - r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) { - printf("\n PCIE3 connected to Slot 1 as %s (base addr %x)", + SET_STD_PCIE_INFO(pci_info[num], 3); + printf(" PCIE3 connected to Slot 1 as %s (base addr %lx)\n", pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug(" with errors. Clearing. Now 0x%08x", - pci->pme_msg_det); - } - printf("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_MEM_BUS, - CONFIG_SYS_PCIE3_MEM_PHYS, - CONFIG_SYS_PCIE3_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_IO_BUS, - CONFIG_SYS_PCIE3_IO_PHYS, - CONFIG_SYS_PCIE3_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - first_free_busno = hose->last_busno+1; - printf(" PCIE3 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); - + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie3_hose, first_free_busno); } else { printf(" PCIE3: disabled\n"); } + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ #endif #ifdef CONFIG_PCIE1 - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - hose = &pcie1_hose; pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent); pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - r = hose->regions; if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) { - printf("\n PCIE1 connected to Slot 2 as %s (base addr %x)", + SET_STD_PCIE_INFO(pci_info[num], 1); + printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n", pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug(" with errors. Clearing. Now 0x%08x", - pci->pme_msg_det); - } - printf("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_MEM_BUS, - CONFIG_SYS_PCIE1_MEM_PHYS, - CONFIG_SYS_PCIE1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_IO_BUS, - CONFIG_SYS_PCIE1_IO_PHYS, - CONFIG_SYS_PCIE1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - first_free_busno = hose->last_busno+1; - printf(" PCIE1 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); - + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie1_hose, first_free_busno); } else { printf(" PCIE1: disabled\n"); } + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ #endif } #endif diff --git a/board/pm854/law.c b/board/pm854/law.c index 39e8dbbd532..ac21d7a270e 100644 --- a/board/pm854/law.c +++ b/board/pm854/law.c @@ -52,7 +52,7 @@ struct law_entry law_table[] = { /* This is not so much the SDRAM map as it is the whole localbus map. */ SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/pm856/law.c b/board/pm856/law.c index 39e8dbbd532..ac21d7a270e 100644 --- a/board/pm856/law.c +++ b/board/pm856/law.c @@ -52,7 +52,7 @@ struct law_entry law_table[] = { /* This is not so much the SDRAM map as it is the whole localbus map. */ SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/sbc8548/Makefile b/board/sbc8548/Makefile index 9919a6efe08..09e5c2e18bd 100644 --- a/board/sbc8548/Makefile +++ b/board/sbc8548/Makefile @@ -2,8 +2,8 @@ # (C) Copyright 2004-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -# (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>. -# Added support for Wind River SBC8560 board +# (C) Copyright 2007 Wind River Systems Inc <www.windriver.com>. +# Added support for Wind River SBC8548 board # # See file CREDITS for list of people who contributed to this # project. diff --git a/board/sbc8548/law.c b/board/sbc8548/law.c index e8c7ae2a2ee..6d1efc0c69e 100644 --- a/board/sbc8548/law.c +++ b/board/sbc8548/law.c @@ -32,8 +32,10 @@ * * 0x0000_0000 0x0fff_ffff DDR 256M * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCIe MEM 512M * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M + * 0xe200_0000 0xe27f_ffff PCI1 IO 8M + * 0xe280_0000 0xe2ff_ffff PCIe IO 8M * 0xf000_0000 0xf7ff_ffff SDRAM 128M * 0xf8b0_0000 0xf80f_ffff EEPROM 1M * 0xfb80_0000 0xff7f_ffff FLASH (2nd bank) 64M @@ -48,8 +50,14 @@ struct law_entry law_table[] = { #ifndef CONFIG_SPD_EEPROM SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR), #endif +#ifdef CONFIG_SYS_PCI1_MEM_PHYS SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI), +#endif +#ifdef CONFIG_SYS_PCIE1_MEM_PHYS + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), +#endif /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), }; diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index e5b21b555e9..194f6ab961f 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -1,5 +1,6 @@ /* - * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com> + * Copyright 2007,2009 Wind River Systems, Inc. <www.windriver.com> + * * Copyright 2007 Embedded Specialties, Inc. * * Copyright 2004, 2007 Freescale Semiconductor. @@ -32,6 +33,8 @@ #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> #include <spd_sdram.h> +#include <netdev.h> +#include <tsec.h> #include <miiphy.h> #include <libfdt.h> #include <fdt_support.h> @@ -49,25 +52,19 @@ int board_early_init_f (void) int checkboard (void) { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); volatile u_char *rev= (void *)CONFIG_SYS_BD_REV; printf ("Board: Wind River SBC8548 Rev. 0x%01x\n", - (*rev) >> 4); + in_8(rev) >> 4); /* * Initialize local bus. */ local_bus_init (); - /* - * Hack TSEC 3 and 4 IO voltages. - */ - gur->tsec34ioovcr = 0xe7e0; /* 1110 0111 1110 0xxx */ - - ecm->eedr = 0xffffffff; /* clear ecm errors */ - ecm->eeer = 0xffffffff; /* enable ecm errors */ + out_be32(&ecm->eedr, 0xffffffff); /* clear ecm errors */ + out_be32(&ecm->eeer, 0xffffffff); /* enable ecm errors */ return 0; } @@ -89,7 +86,7 @@ initdram(int board_type) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - gur->ddrdllcr = 0x81000000; + out_be32(&gur->ddrdllcr, 0x81000000); asm("sync;isync;msync"); udelay(200); } @@ -126,24 +123,24 @@ local_bus_init(void) sys_info_t sysinfo; get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; + clkdiv = (in_be32(&lbc->lcrr) & LCRR_CLKDIV) * 2; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; - gur->lbiuiplldcr1 = 0x00078080; + out_be32(&gur->lbiuiplldcr1, 0x00078080); if (clkdiv == 16) { - gur->lbiuiplldcr0 = 0x7c0f1bf0; + out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0); } else if (clkdiv == 8) { - gur->lbiuiplldcr0 = 0x6c0f1bf0; + out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0); } else if (clkdiv == 4) { - gur->lbiuiplldcr0 = 0x5c0f1bf0; + out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0); } - lbc->lcrr |= 0x00030000; + setbits_be32(&lbc->lcrr, 0x00030000); asm("sync;isync;msync"); - lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ - lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ + out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */ + out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */ } /* @@ -152,7 +149,7 @@ local_bus_init(void) void sdram_init(void) { -#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM) +#if defined(CONFIG_SYS_LBC_SDRAM_SIZE) uint idx; volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); @@ -166,18 +163,24 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or3 = CONFIG_SYS_OR3_PRELIM; + out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM); asm("msync"); - lbc->br3 = CONFIG_SYS_BR3_PRELIM; + out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM); asm("msync"); - lbc->lbcr = CONFIG_SYS_LBC_LBCR; + out_be32(&lbc->or4, CONFIG_SYS_OR4_PRELIM); asm("msync"); + out_be32(&lbc->br4, CONFIG_SYS_BR4_PRELIM); + asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; - lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; + out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); + asm("msync"); + + + out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT); + out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); asm("msync"); /* @@ -189,7 +192,7 @@ sdram_init(void) /* * Issue PRECHARGE ALL command. */ - lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL; + out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_PCHALL); asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -199,7 +202,7 @@ sdram_init(void) * Issue 8 AUTO REFRESH commands. */ for (idx = 0; idx < 8; idx++) { - lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH; + out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_ARFRSH); asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -209,7 +212,7 @@ sdram_init(void) /* * Issue 8 MODE-set command. */ - lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW; + out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_MRW); asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -218,7 +221,7 @@ sdram_init(void) /* * Issue NORMAL OP command. */ - lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; + out_be32(&lbc->lsdmr, lsdmr_common | LSDMR_OP_NORMAL); asm("sync;msync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); @@ -266,228 +269,132 @@ testdram(void) } #endif -#if !defined(CONFIG_SPD_EEPROM) +#if !defined(CONFIG_SPD_EEPROM) +#define CONFIG_SYS_DDR_CONTROL 0xc300c000 /************************************************************************* * fixed_sdram init -- doesn't use serial presence detect. * assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed. ************************************************************************/ long int fixed_sdram (void) { - #define CONFIG_SYS_DDR_CONTROL 0xc300c000 - volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - ddr->cs0_bnds = 0x0000007f; - ddr->cs1_bnds = 0x008000ff; - ddr->cs2_bnds = 0x00000000; - ddr->cs3_bnds = 0x00000000; - ddr->cs0_config = 0x80010101; - ddr->cs1_config = 0x80010101; - ddr->cs2_config = 0x00000000; - ddr->cs3_config = 0x00000000; - ddr->timing_cfg_3 = 0x00000000; - ddr->timing_cfg_0 = 0x00220802; - ddr->timing_cfg_1 = 0x38377322; - ddr->timing_cfg_2 = 0x0fa044C7; - ddr->sdram_cfg = 0x4300C000; - ddr->sdram_cfg_2 = 0x24401000; - ddr->sdram_mode = 0x23C00542; - ddr->sdram_mode_2 = 0x00000000; - ddr->sdram_interval = 0x05080100; - ddr->sdram_md_cntl = 0x00000000; - ddr->sdram_data_init = 0x00000000; - ddr->sdram_clk_cntl = 0x03800000; + out_be32(&ddr->cs0_bnds, 0x0000007f); + out_be32(&ddr->cs1_bnds, 0x008000ff); + out_be32(&ddr->cs2_bnds, 0x00000000); + out_be32(&ddr->cs3_bnds, 0x00000000); + out_be32(&ddr->cs0_config, 0x80010101); + out_be32(&ddr->cs1_config, 0x80010101); + out_be32(&ddr->cs2_config, 0x00000000); + out_be32(&ddr->cs3_config, 0x00000000); + out_be32(&ddr->timing_cfg_3, 0x00000000); + out_be32(&ddr->timing_cfg_0, 0x00220802); + out_be32(&ddr->timing_cfg_1, 0x38377322); + out_be32(&ddr->timing_cfg_2, 0x0fa044C7); + out_be32(&ddr->sdram_cfg, 0x4300C000); + out_be32(&ddr->sdram_cfg_2, 0x24401000); + out_be32(&ddr->sdram_mode, 0x23C00542); + out_be32(&ddr->sdram_mode_2, 0x00000000); + out_be32(&ddr->sdram_interval, 0x05080100); + out_be32(&ddr->sdram_md_cntl, 0x00000000); + out_be32(&ddr->sdram_data_init, 0x00000000); + out_be32(&ddr->sdram_clk_cntl, 0x03800000); asm("sync;isync;msync"); udelay(500); #if defined (CONFIG_DDR_ECC) /* Enable ECC checking */ - ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); + out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL | 0x20000000); #else - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; + out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL); #endif return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } #endif -#if defined(CONFIG_PCI) || defined(CONFIG_PCI1) -/* For some reason the Tundra PCI bridge shows up on itself as a - * different device. Work around that by refusing to configure it. - */ -void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { } - -static struct pci_config_table pci_sbc8548_config_table[] = { - {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, - {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, - {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, - mpc85xx_config_via_usbide, {0,0,0}}, - {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, - mpc85xx_config_via_usb, {0,0,0}}, - {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, - mpc85xx_config_via_usb2, {0,0,0}}, - {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, - mpc85xx_config_via_power, {0,0,0}}, - {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, - mpc85xx_config_via_ac97, {0,0,0}}, - {}, -}; - -static struct pci_controller pci1_hose = { - config_table: pci_sbc8548_config_table}; -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_PCI2 -static struct pci_controller pci2_hose; -#endif /* CONFIG_PCI2 */ +#ifdef CONFIG_PCI1 +static struct pci_controller pci1_hose; +#endif /* CONFIG_PCI1 */ #ifdef CONFIG_PCIE1 static struct pci_controller pcie1_hose; #endif /* CONFIG_PCIE1 */ -int first_free_busno=0; +#ifdef CONFIG_PCI void pci_init_board(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct fsl_pci_info pci_info[2]; + u32 devdisr, pordevsr, porpllsr, io_sel; + int first_free_busno = 0; + int num = 0; -#ifdef CONFIG_PCI1 -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - struct pci_controller *hose = &pci1_hose; - struct pci_config_table *table; - struct pci_region *r = hose->regions; +#ifdef CONFIG_PCIE1 + int pcie_configured; +#endif - uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */ - uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ - uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */ + devdisr = in_be32(&gur->devdisr); + pordevsr = in_be32(&gur->pordevsr); + porpllsr = in_be32(&gur->porpllsr); + io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - uint pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI_1, host_agent); + debug(" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); - uint pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */ +#ifdef CONFIG_PCI1 + if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { + uint pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; + uint pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; + uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; + uint pci_speed = CONFIG_SYS_CLK_FREQ; /* get_clock_freq() */ - if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) { - printf (" PCI: %d bit, %s MHz, %s, %s, %s\n", + printf (" PCI host: %d bit, %s MHz, %s, %s\n", (pci_32) ? 32 : 64, - (pci_speed == 33333000) ? "33" : - (pci_speed == 66666000) ? "66" : "unknown", + (pci_speed == 33000000) ? "33" : + (pci_speed == 66000000) ? "66" : "unknown", pci_clk_sel ? "sync" : "async", - pci_agent ? "agent" : "host", - pci_arb ? "arbiter" : "external-arbiter" - ); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BASE, - CONFIG_SYS_PCI1_MEM_PHYS, - CONFIG_SYS_PCI1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCI1_IO_BASE, - CONFIG_SYS_PCI1_IO_PHYS, - CONFIG_SYS_PCI1_IO_SIZE, - PCI_REGION_IO); - hose->region_count = r - hose->regions; - - /* relocate config table pointers */ - hose->config_table = \ - (struct pci_config_table *)((uint)hose->config_table + gd->reloc_off); - for (table = hose->config_table; table && table->vendor; table++) - table->config_device += gd->reloc_off; - - hose->first_busno=first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - first_free_busno=hose->last_busno+1; - printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno); -#ifdef CONFIG_PCIX_CHECK - if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { - /* PCI-X init */ - if (CONFIG_SYS_CLK_FREQ < 66000000) - printf("PCI-X will only work at 66 MHz\n"); - - reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ - | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; - pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16); - } -#endif + pci_arb ? "arbiter" : "external-arbiter"); + + SET_STD_PCI_INFO(pci_info[num], 1); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pci1_hose, first_free_busno); } else { printf (" PCI: disabled\n"); } -} + + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ #endif -#ifdef CONFIG_PCI2 -{ - uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */ - uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */ - if (pci_dual) { - printf (" PCI2: 32 bit, 66 MHz, %s\n", - pci2_clk_sel ? "sync" : "async"); - } else { - printf (" PCI2: disabled\n"); - } -} -#else - gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */ -#endif /* CONFIG_PCI2 */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */ #ifdef CONFIG_PCIE1 -{ - volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - struct pci_controller *hose = &pcie1_hose; - int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent); - struct pci_region *r = hose->regions; - - int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE connected to slot as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", - (uint)pci); - - if (pci->pme_msg_det) { - pci->pme_msg_det = 0xffffffff; - debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); - } - printf ("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_MEM_BASE, - CONFIG_SYS_PCIE1_MEM_PHYS, - CONFIG_SYS_PCIE1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_IO_BASE, - CONFIG_SYS_PCIE1_IO_PHYS, - CONFIG_SYS_PCIE1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - - hose->first_busno=first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - printf ("PCIE on bus %d - %d\n",hose->first_busno,hose->last_busno); - - first_free_busno=hose->last_busno+1; + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); + if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ + SET_STD_PCIE_INFO(pci_info[num], 1); + printf (" PCIE at base address %lx\n", pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie1_hose, first_free_busno); } else { printf (" PCIE: disabled\n"); } - } + + puts("\n"); #else - gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ +#endif +} #endif +int board_eth_init(bd_t *bis) +{ + tsec_standard_init(bis); + pci_eth_init(bis); + return 0; /* otherwise cpu_eth_init gets run */ } int last_stage_init(void) diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c index 18d11f6dc76..38bdeb37c30 100644 --- a/board/sbc8548/tlb.c +++ b/board/sbc8548/tlb.c @@ -31,65 +31,73 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), /* - * TLB 0: 16M Non-cacheable, guarded - * 0xff800000 16M TLB for 8MB FLASH + * TLB 0: 64M Non-cacheable, guarded + * 0xfc000000 56M 8MB -> 64MB of user flash + * 0xff800000 8M boot FLASH * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x800000, + CONFIG_SYS_ALT_FLASH + 0x800000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_16M, 1), + 0, 0, BOOKE_PAGESZ_64M, 1), /* - * TLB 1: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half + * TLB 1: 1G Non-cacheable, guarded + * 0x80000000 512M PCI1 MEM + * 0xa0000000 512M PCIe MEM */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_256M, 1), + 0, 1, BOOKE_PAGESZ_1G, 1), /* - * TLB 2: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 3: 256M Cacheable, non-guarded + * TLB 2: 256M Cacheable, non-guarded * 0x0 256M DDR SDRAM */ - #if !defined(CONFIG_SPD_EEPROM) +#if !defined(CONFIG_SPD_EEPROM) SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 3, BOOKE_PAGESZ_256M, 1), - #endif + 0, 2, BOOKE_PAGESZ_256M, 1), +#endif /* - * TLB 4: 64M Non-cacheable, guarded + * TLB 3: 64M Non-cacheable, guarded * 0xe0000000 1M CCSRBAR - * 0xe2000000 16M PCI1 IO + * 0xe2000000 8M PCI1 IO + * 0xe2800000 8M PCIe IO */ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 4: 64M Cacheable, non-guarded + * 0xf0000000 64M LBC SDRAM First half + */ + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 4, BOOKE_PAGESZ_64M, 1), /* * TLB 5: 64M Cacheable, non-guarded - * 0xf0000000 64M LBC SDRAM + * 0xf4000000 64M LBC SDRAM Second half */ - SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, + SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000, + CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 5, BOOKE_PAGESZ_64M, 1), @@ -103,6 +111,24 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_16M, 1), + + /* + * TLB 7: 4M Non-cacheable, guarded + * 0xfb800000 4M 1st 4MB block of 64MB user FLASH + */ + SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_4M, 1), + + /* + * TLB 8: 4M Non-cacheable, guarded + * 0xfbc00000 4M 2nd 4MB block of 64MB user FLASH + */ + SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x400000, + CONFIG_SYS_ALT_FLASH + 0x400000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 8, BOOKE_PAGESZ_4M, 1), + }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/socrates/law.c b/board/socrates/law.c index 71cff8cf0b9..cb55fd43d64 100644 --- a/board/socrates/law.c +++ b/board/socrates/law.c @@ -52,9 +52,9 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_LBC_FLASH_BASE, LAW_SIZE_64M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), #if defined(CONFIG_SYS_FPGA_BASE) - SET_LAW(CONFIG_SYS_FPGA_BASE, LAWAR_SIZE_1M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_FPGA_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), #endif - SET_LAW(CONFIG_SYS_LIME_BASE, LAWAR_SIZE_64M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_LIME_BASE, LAW_SIZE_64M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/stx/stxgp3/law.c b/board/stx/stxgp3/law.c index ba89f0edc0f..af0ac099871 100644 --- a/board/stx/stxgp3/law.c +++ b/board/stx/stxgp3/law.c @@ -52,7 +52,7 @@ struct law_entry law_table[] = { /* This is not so much the SDRAM map as it is the whole localbus map. */ SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), + SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/stx/stxssa/law.c b/board/stx/stxssa/law.c index 55dde667563..e3c34ed87b2 100644 --- a/board/stx/stxssa/law.c +++ b/board/stx/stxssa/law.c @@ -54,7 +54,7 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1), SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2), /* Map the whole localbus, including flash and reset latch. */ - SET_LAW(CONFIG_SYS_LBC_OPTION_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_LBC_OPTION_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite5200/law.c b/board/xes/xpedite5200/law.c index 386f9c5873c..bbfcb9da83c 100644 --- a/board/xes/xpedite5200/law.c +++ b/board/xes/xpedite5200/law.c @@ -40,7 +40,7 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), #if CONFIG_SYS_PCI1_MEM_PHYS SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAWAR_SIZE_8M, LAW_TRGT_IF_PCI_1), + SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI_1), #endif #if CONFIG_SYS_PCI2_MEM_PHYS SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_2), diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile index 3ef00e85069..56de7eb3818 100644 --- a/cpu/mpc85xx/Makefile +++ b/cpu/mpc85xx/Makefile @@ -53,6 +53,7 @@ COBJS-$(CONFIG_P1011) += ddr-gen3.o COBJS-$(CONFIG_P1020) += ddr-gen3.o COBJS-$(CONFIG_P2010) += ddr-gen3.o COBJS-$(CONFIG_P2020) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index bdd9ee4c833..0cc6e0323f2 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -46,11 +46,20 @@ int checkcpu (void) char buf1[32], buf2[32]; #ifdef CONFIG_DDR_CLK_FREQ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#ifdef CONFIG_FSL_CORENET + u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC) + >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT; +#else u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; +#endif +#else +#ifdef CONFIG_FSL_CORENET + u32 ddr_sync = 0; #else u32 ddr_ratio = 0; #endif +#endif /* CONFIG_DDR_CLK_FREQ */ int i; svr = get_svr(); @@ -111,6 +120,19 @@ int checkcpu (void) } printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus)); +#ifdef CONFIG_FSL_CORENET + if (ddr_sync == 1) { + printf(" DDR:%-4s MHz (%s MT/s data rate) " + "(Synchronous), ", + strmhz(buf1, sysinfo.freqDDRBus/2), + strmhz(buf2, sysinfo.freqDDRBus)); + } else { + printf(" DDR:%-4s MHz (%s MT/s data rate) " + "(Asynchronous), ", + strmhz(buf1, sysinfo.freqDDRBus/2), + strmhz(buf2, sysinfo.freqDDRBus)); + } +#else switch (ddr_ratio) { case 0x0: printf(" DDR:%-4s MHz (%s MT/s data rate), ", @@ -118,22 +140,26 @@ int checkcpu (void) strmhz(buf2, sysinfo.freqDDRBus)); break; case 0x7: - printf(" DDR:%-4s MHz (%s MT/s data rate) (Synchronous), ", + printf(" DDR:%-4s MHz (%s MT/s data rate) " + "(Synchronous), ", strmhz(buf1, sysinfo.freqDDRBus/2), strmhz(buf2, sysinfo.freqDDRBus)); break; default: - printf(" DDR:%-4s MHz (%s MT/s data rate) (Asynchronous), ", + printf(" DDR:%-4s MHz (%s MT/s data rate) " + "(Asynchronous), ", strmhz(buf1, sysinfo.freqDDRBus/2), strmhz(buf2, sysinfo.freqDDRBus)); break; } +#endif - if (sysinfo.freqLocalBus > LCRR_CLKDIV) + if (sysinfo.freqLocalBus > LCRR_CLKDIV) { printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); - else + } else { printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", sysinfo.freqLocalBus); + } #ifdef CONFIG_CPM2 printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); @@ -143,6 +169,17 @@ int checkcpu (void) printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE)); #endif +#ifdef CONFIG_SYS_DPAA_FMAN + for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) { + printf(" FMAN%d: %s MHz\n", i, + strmhz(buf1, sysinfo.freqFMan[i])); + } +#endif + +#ifdef CONFIG_SYS_DPAA_PME + printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME)); +#endif + puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n"); return 0; @@ -184,7 +221,11 @@ int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) */ unsigned long get_tbclk (void) { +#ifdef CONFIG_FSL_CORENET + return (gd->bus_clk + 8) / 16; +#else return (gd->bus_clk + 4UL)/8UL; +#endif } diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index a6d1e999b60..53369349d13 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -136,6 +136,20 @@ void config_8560_ioports (volatile ccsr_cpm_t * cpm) * initialize a bunch of registers */ +#ifdef CONFIG_FSL_CORENET +static void corenet_tb_init(void) +{ + volatile ccsr_rcpm_t *rcpm = + (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR); + volatile ccsr_pic_t *pic = + (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR); + u32 whoami = in_be32(&pic->whoami); + + /* Enable the timebase register for this core */ + out_be32(&rcpm->ctbenrl, (1 << whoami)); +} +#endif + void cpu_init_f (void) { volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); @@ -229,6 +243,9 @@ void cpu_init_f (void) #if defined(CONFIG_FSL_DMA) dma_init(); #endif +#ifdef CONFIG_FSL_CORENET + corenet_tb_init(); +#endif } @@ -336,8 +353,8 @@ int cpu_init_r(void) u32 l2cfg0 = mfspr(SPRN_L2CFG0); /* invalidate the L2 cache */ - mtspr(SPRN_L2CSR0, L2CSR0_L2FI); - while (mfspr(SPRN_L2CSR0) & L2CSR0_L2FI) + mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC)); + while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC)) ; /* enable the cache */ diff --git a/cpu/mpc85xx/cpu_init_early.c b/cpu/mpc85xx/cpu_init_early.c index 7886f868f2a..32aa94b612c 100644 --- a/cpu/mpc85xx/cpu_init_early.c +++ b/cpu/mpc85xx/cpu_init_early.c @@ -24,6 +24,51 @@ DECLARE_GLOBAL_DATA_PTR; +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) +#ifdef CONFIG_FSL_CORENET +static void setup_ccsrbar(void) +{ + u32 temp; + volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000); + volatile ccsr_local_t *ccm; + + /* + * We can't call set_law() because we haven't moved + * CCSR yet. + */ + ccm = (void *)ccsr_virt; + + out_be32(&ccm->law[0].lawbarh, + (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32); + out_be32(&ccm->law[0].lawbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS); + out_be32(&ccm->law[0].lawar, + LAW_EN | (0x1e << 20) | LAW_SIZE_4K); + + in_be32((u32 *)(ccsr_virt + 0)); + in_be32((u32 *)(ccsr_virt + 1)); + isync(); + + ccm = (void *)CONFIG_SYS_CCSRBAR; + /* Now use the temporary LAW to move CCSR */ + out_be32(&ccm->ccsrbarh, (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32); + out_be32(&ccm->ccsrbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS); + out_be32(&ccm->ccsrar, CCSRAR_C); + temp = in_be32(&ccm->ccsrar); + disable_law(0); +} +#else +static void setup_ccsrbar(void) +{ + u32 temp; + volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000); + + temp = in_be32(ccsr_virt); + out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12); + temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR); +} +#endif +#endif + /* We run cpu_init_early_f in AS = 1 */ void cpu_init_early_f(void) { @@ -50,24 +95,15 @@ void cpu_init_early_f(void) /* set up CCSR if we want it moved */ #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) - { - u32 temp; - volatile u32 *ccsr_virt = - (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000); - - mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(1); - /* mas1 is the same as above */ - mas2 = FSL_BOOKE_MAS2((u32)ccsr_virt, MAS2_I|MAS2_G); - mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, - MAS3_SW|MAS3_SR); - mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_DEFAULT); - - write_tlb(mas0, mas1, mas2, mas3, mas7); - - temp = in_be32(ccsr_virt); - out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12); - temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR); - } + mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(1); + /* mas1 is the same as above */ + mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G); + mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, MAS3_SW|MAS3_SR); + mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_DEFAULT); + + write_tlb(mas0, mas1, mas2, mas3, mas7); + + setup_ccsrbar(); #endif init_laws(); diff --git a/cpu/mpc85xx/cpu_init_nand.c b/cpu/mpc85xx/cpu_init_nand.c new file mode 100644 index 00000000000..184cca4c543 --- /dev/null +++ b/cpu/mpc85xx/cpu_init_nand.c @@ -0,0 +1,63 @@ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +void cpu_init_f(void) +{ + ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + + /* + * LCRR - Clock Ratio Register - set up local bus timing + * when needed + */ + out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8); + +#if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM) + out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM); + out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM); +#else +#error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined +#endif + +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) + ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; + char *l2srbar; + int i; + + out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR); + + /* set MBECCDIS=1, SBECCDIS=1 */ + out_be32(&l2cache->l2errdis, + (MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC)); + + /* set L2E=1 & L2SRAM=001 */ + out_be32(&l2cache->l2ctl, + (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE)); + + /* Initialize L2 SRAM to zero */ + l2srbar = (char *)CONFIG_SYS_INIT_L2_ADDR; + for (i = 0; i < CONFIG_SYS_L2_SIZE; i++) + l2srbar[i] = 0; +#endif +} diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c index 723f473dabf..efb65188226 100644 --- a/cpu/mpc85xx/fdt.c +++ b/cpu/mpc85xx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007-2009 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -27,6 +27,7 @@ #include <libfdt.h> #include <fdt_support.h> #include <asm/processor.h> +#include <linux/ctype.h> #ifdef CONFIG_FSL_ESDHC #include <fsl_esdhc.h> #endif @@ -148,8 +149,14 @@ static inline void ft_fixup_l2cache(void *blob) } if (cpu) { - len = sprintf(compat_buf, "fsl,mpc%s-l2-cache-controller", - cpu->name); + if (isdigit(cpu->name[0])) + len = sprintf(compat_buf, + "fsl,mpc%s-l2-cache-controller", cpu->name); + else + len = sprintf(compat_buf, + "fsl,%c%s-l2-cache-controller", + tolower(cpu->name[0]), cpu->name + 1); + sprintf(&compat_buf[len + 1], "cache"); } fdt_setprop(blob, off, "cache-unified", NULL, 0); @@ -287,7 +294,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) fdt_add_enet_stashing(blob); do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "timebase-frequency", bd->bi_busfreq / 8, 1); + "timebase-frequency", get_tbclk(), 1); do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "bus-frequency", bd->bi_busfreq, 1); get_sys_info(&sysinfo); diff --git a/cpu/mpc85xx/mp.c b/cpu/mpc85xx/mp.c index fa65bed083b..b5c6020c7f1 100644 --- a/cpu/mpc85xx/mp.c +++ b/cpu/mpc85xx/mp.c @@ -26,6 +26,7 @@ #include <lmb.h> #include <asm/io.h> #include <asm/mmu.h> +#include <asm/fsl_law.h> #include "mp.h" DECLARE_GLOBAL_DATA_PTR; @@ -135,7 +136,67 @@ ulong get_spin_addr(void) return addr; } -static void pq3_mp_up(unsigned long bootpg) +#ifdef CONFIG_FSL_CORENET +static void plat_mp_up(unsigned long bootpg) +{ + u32 up, cpu_up_mask, whoami; + u32 *table = (u32 *)get_spin_addr(); + volatile ccsr_gur_t *gur; + volatile ccsr_local_t *ccm; + volatile ccsr_rcpm_t *rcpm; + volatile ccsr_pic_t *pic; + int timeout = 10; + u32 nr_cpus; + struct law_entry e; + + gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); + rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR); + pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR); + + nr_cpus = ((in_be32(&pic->frr) >> 8) & 0xff) + 1; + + whoami = in_be32(&pic->whoami); + cpu_up_mask = 1 << whoami; + out_be32(&ccm->bstrl, bootpg); + + e = find_law(bootpg); + out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K); + + /* disable time base at the platform */ + out_be32(&rcpm->ctbenrl, cpu_up_mask); + + /* release the hounds */ + up = ((1 << nr_cpus) - 1); + out_be32(&gur->brrl, up); + + /* wait for everyone */ + while (timeout) { + int i; + for (i = 0; i < nr_cpus; i++) { + if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER]) + cpu_up_mask |= (1 << i); + }; + + if ((cpu_up_mask & up) == up) + break; + + udelay(100); + timeout--; + } + + if (timeout == 0) + printf("CPU up timeout. CPU up mask is %x should be %x\n", + cpu_up_mask, up); + + /* enable time base at the platform */ + out_be32(&rcpm->ctbenrl, 0); + mtspr(SPRN_TBWU, 0); + mtspr(SPRN_TBWL, 0); + out_be32(&rcpm->ctbenrl, (1 << nr_cpus) - 1); +} +#else +static void plat_mp_up(unsigned long bootpg) { u32 up, cpu_up_mask, whoami; u32 *table = (u32 *)get_spin_addr(); @@ -196,6 +257,7 @@ static void pq3_mp_up(unsigned long bootpg) devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1); out_be32(&gur->devdisr, devdisr); } +#endif void cpu_mp_lmb_reserve(struct lmb *lmb) { @@ -217,7 +279,7 @@ void setup_mp(void) if (i != -1) { /* map reset page to bootpg so we can copy code there */ disable_tlb(i); - + set_tlb(1, 0xfffff000, bootpg, /* tlb, epn, rpn */ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, /* perms, wimge */ 0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */ @@ -234,7 +296,7 @@ void setup_mp(void) MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, /* perms, wimge */ 0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */ - pq3_mp_up(bootpg); + plat_mp_up(bootpg); } else { puts("WARNING: No reset page TLB. " "Skipping secondary core setup\n"); diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S index 074b056b749..ecbd0d58577 100644 --- a/cpu/mpc85xx/release.S +++ b/cpu/mpc85xx/release.S @@ -102,7 +102,8 @@ __secondary_start_page: #ifdef CONFIG_BACKSIDE_L2_CACHE /* Enable/invalidate the L2 cache */ msync - lis r3,L2CSR0_L2FI@h + lis r3,(L2CSR0_L2FI|L2CSR0_L2LFC)@h + ori r3,r3,(L2CSR0_L2FI|L2CSR0_L2LFC)@l mtspr SPRN_L2CSR0,r3 1: mfspr r3,SPRN_L2CSR0 diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c index 2fdcefb219c..0244b5c1b7e 100644 --- a/cpu/mpc85xx/speed.c +++ b/cpu/mpc85xx/speed.c @@ -1,5 +1,6 @@ /* * Copyright 2004, 2007-2009 Freescale Semiconductor, Inc. + * * (C) Copyright 2003 Motorola Inc. * Xianghua Xiao, (X.Xiao@motorola.com) * @@ -37,6 +38,90 @@ DECLARE_GLOBAL_DATA_PTR; void get_sys_info (sys_info_t * sysInfo) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#ifdef CONFIG_FSL_CORENET + volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR); + + const u8 core_cplx_PLL[16] = { + [ 0] = 0, /* CC1 PPL / 1 */ + [ 1] = 0, /* CC1 PPL / 2 */ + [ 2] = 0, /* CC1 PPL / 4 */ + [ 4] = 1, /* CC2 PPL / 1 */ + [ 5] = 1, /* CC2 PPL / 2 */ + [ 6] = 1, /* CC2 PPL / 4 */ + [ 8] = 2, /* CC3 PPL / 1 */ + [ 9] = 2, /* CC3 PPL / 2 */ + [10] = 2, /* CC3 PPL / 4 */ + [12] = 3, /* CC4 PPL / 1 */ + [13] = 3, /* CC4 PPL / 2 */ + [14] = 3, /* CC4 PPL / 4 */ + }; + + const u8 core_cplx_PLL_div[16] = { + [ 0] = 1, /* CC1 PPL / 1 */ + [ 1] = 2, /* CC1 PPL / 2 */ + [ 2] = 4, /* CC1 PPL / 4 */ + [ 4] = 1, /* CC2 PPL / 1 */ + [ 5] = 2, /* CC2 PPL / 2 */ + [ 6] = 4, /* CC2 PPL / 4 */ + [ 8] = 1, /* CC3 PPL / 1 */ + [ 9] = 2, /* CC3 PPL / 2 */ + [10] = 4, /* CC3 PPL / 4 */ + [12] = 1, /* CC4 PPL / 1 */ + [13] = 2, /* CC4 PPL / 2 */ + [14] = 4, /* CC4 PPL / 4 */ + }; + uint lcrr_div, i, freqCC_PLL[4], rcw_tmp; + unsigned long sysclk = CONFIG_SYS_CLK_FREQ; + + sysInfo->freqSystemBus = sysclk; + sysInfo->freqDDRBus = sysclk; + freqCC_PLL[0] = sysclk; + freqCC_PLL[1] = sysclk; + freqCC_PLL[2] = sysclk; + freqCC_PLL[3] = sysclk; + + sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0xf; + sysInfo->freqDDRBus *= ((in_be32(&gur->rcwsr[0]) >> 17) & 0xf); + freqCC_PLL[0] *= (in_be32(&clk->pllc1gsr) >> 1) & 0x3f; + freqCC_PLL[1] *= (in_be32(&clk->pllc2gsr) >> 1) & 0x3f; + freqCC_PLL[2] *= (in_be32(&clk->pllc3gsr) >> 1) & 0x3f; + freqCC_PLL[3] *= (in_be32(&clk->pllc4gsr) >> 1) & 0x3f; + + rcw_tmp = in_be32(&gur->rcwsr[3]); + for (i = 0; i < cpu_numcores(); i++) { + u32 c_pll_sel = (in_be32(&clk->clkc0csr + i*8) >> 27) & 0xf; + u32 cplx_pll = core_cplx_PLL[c_pll_sel]; + + sysInfo->freqProcessor[i] = + freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + } + +#define PME_CLK_SEL 0x80000000 +#define FM1_CLK_SEL 0x40000000 +#define FM2_CLK_SEL 0x20000000 + rcw_tmp = in_be32(&gur->rcwsr[7]); + +#ifdef CONFIG_SYS_DPAA_PME + if (rcw_tmp & PME_CLK_SEL) + sysInfo->freqPME = freqCC_PLL[2] / 2; + else + sysInfo->freqPME = sysInfo->freqSystemBus / 2; +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN + if (rcw_tmp & FM1_CLK_SEL) + sysInfo->freqFMan[0] = freqCC_PLL[2] / 2; + else + sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; +#if (CONFIG_SYS_NUM_FMAN) == 2 + if (rcw_tmp & FM2_CLK_SEL) + sysInfo->freqFMan[1] = freqCC_PLL[2] / 2; + else + sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; +#endif +#endif + +#else uint plat_ratio,e500_ratio,half_freqSystemBus; uint lcrr_div; int i; @@ -67,6 +152,7 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif +#endif #ifdef CONFIG_QE qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO) diff --git a/cpu/mpc85xx/u-boot-nand_spl.lds b/cpu/mpc85xx/u-boot-nand_spl.lds new file mode 100644 index 00000000000..fef3e42e09c --- /dev/null +++ b/cpu/mpc85xx/u-boot-nand_spl.lds @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de + * + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + . = 0xfff00000; + .text : { + *(.text) + } + _etext = .; + + .reloc : { + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + . = ALIGN(8); + .data : { + *(.rodata*) + *(.data*) + *(.sdata*) + } + _edata = .; + + . = ALIGN(8); + __init_begin = .; + __init_end = .; + + .resetvec ADDR(.text) + 0xffc : { + *(.resetvec) + } = 0xffff + + __bss_start = .; + .bss : { + *(.sbss) + *(.bss) + } + _end = .; +} +ASSERT(__init_end <= 0xfff00ffc, "NAND bootstrap too big"); diff --git a/cpu/mpc8xxx/cpu.c b/cpu/mpc8xxx/cpu.c index 00791e11bd5..d191263f508 100644 --- a/cpu/mpc8xxx/cpu.c +++ b/cpu/mpc8xxx/cpu.c @@ -72,6 +72,10 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P2010, P2010_E, 1), CPU_TYPE_ENTRY(P2020, P2020, 2), CPU_TYPE_ENTRY(P2020, P2020_E, 2), + CPU_TYPE_ENTRY(P4040, P4040, 4), + CPU_TYPE_ENTRY(P4040, P4040_E, 4), + CPU_TYPE_ENTRY(P4080, P4080, 8), + CPU_TYPE_ENTRY(P4080, P4080_E, 8), #elif defined(CONFIG_MPC86xx) CPU_TYPE_ENTRY(8610, 8610, 1), CPU_TYPE_ENTRY(8641, 8641, 2), diff --git a/doc/README.sbc8548 b/doc/README.sbc8548 index b34d0406cbb..d72d97d027e 100644 --- a/doc/README.sbc8548 +++ b/doc/README.sbc8548 @@ -1,27 +1,176 @@ -Wind River SBC8548 reference board -=========================== +Intro: +====== -Copyright 2007, Embedded Specialties, Inc. -Copyright 2007 Wind River Systemes, Inc. ------------------------------ +The SBC8548 is a stand alone single board computer with a 1GHz +MPC8548 CPU, 8MB boot flash, 64MB user flash and, 256MB DDR2 400MHz +memory. It also has 128MB SDRAM 100MHz LBC memory, with both a PCI-e, +and a PCI-X slot, dual mini-DB9 for UART, and dual RJ-45 for eTSEC +ethernet connections. -1. Building U-Boot ------------------- -The SBC8548 code is known to build using ELDK 4.1. +U-boot Configuration: +===================== - $ make sbc8548_config - Configuring for sbc8548 board... +The following possible u-boot configuration targets are available: - $ make + 1) sbc8548_config + 2) sbc8548_PCI_33_config + 3) sbc8548_PCI_66_config + 4) sbc8548_PCI_33_PCIE_config + 5) sbc8548_PCI_66_PCIE_config +Generally speaking, most people should choose to use #5. Details +of each choice are listed below. -2. Switch and Jumper Settings ------------------------------ -All Jumpers & Switches are in their default positions. Please refer to -the board documentation for details. Some settings control CPU voltages -and settings may change with board revisions. +Choice #1 does not enable CONFIG_PCI, and assumes that the PCI slot +will be left empty (M66EN high), and so the board will operate with +a base clock of 66MHz. Note that you need both PCI enabled in u-boot +and linux in order to have functional PCI under linux. -3. Known limitations --------------------- -PCI: - The code to support PCI is currently disabled and has not been verified. +The second enables PCI support and builds for a 33MHz clock rate. Note +that if a 33MHz 32bit card is inserted in the slot, then the whole board +will clock down to a 33MHz base clock instead of the default 66MHz. This +will change the baud clocks and mess up your serial console output if you +were previously running at 66MHz. If you want to use a 33MHz PCI card, +then you should build a U-Boot with a _PCI_33_ config and store this +to flash prior to powering down the board and inserting the 33MHz PCI +card. [The above discussion assumes that the SW2[1-4] has not been changed +to reflect a different CCB:SYSCLK ratio] + +The third option builds PCI support in, and leaves the clocking at the +default 66MHz. Options four and five are just repeats of option two +and three, but with PCI-e support enabled as well. + +PCI output listing with an intel e1000 PCI-x and a Syskonnect SK-9Exx +is shown below for sbc8548_PCI_66_PCIE_config. (Note that PCI-e with +a 33MHz PCI configuration is currently untested.) + + => pci 0 + Scanning PCI devices on bus 0 + BusDevFun VendorId DeviceId Device Class Sub-Class + _____________________________________________________________ + 00.00.00 0x1057 0x0012 Processor 0x20 + 00.01.00 0x8086 0x1026 Network controller 0x00 + => pci 1 + Scanning PCI devices on bus 1 + BusDevFun VendorId DeviceId Device Class Sub-Class + _____________________________________________________________ + 01.00.00 0x1957 0x0012 Processor 0x20 + => pci 2 + Scanning PCI devices on bus 2 + BusDevFun VendorId DeviceId Device Class Sub-Class + _____________________________________________________________ + 02.00.00 0x1148 0x9e00 Network controller 0x00 + => + + +Hardware Reference: +=================== + +The following contains some summary information on hardware settings +that are relevant to u-boot, based on the board manual. For the +most up to date and complete details of the board, please request the +reference manual ERG-00327-001.pdf from www.windriver.com + +Boot flash: + intel V28F640Jx, 8192x8 (one device) at 0xff80_0000 + +Sodimm flash: + intel V28F128Jx, 16384x8 (4 devices) at 0xfb80_0000 + + + Jumpers: + +Jumper Name ON OFF +---------------------------------------------------------------- +JP12 CS0/CS6 swap see note[*] see note[*] + +JP13 SODIMM flash write OK writes disabled + write prot. + +JP14 HRESET/TRST joined isolated + +JP15 PWR ON when AC pwr use S1 for on/off + +JP16 Demo LEDs lit not lit + +JP19 PCI mode PCI PCI-X + + +[*]JP12, when jumpered parallel to the SODIMM, puts the boot flash +onto /CS0 and the SODIMM flash on /CS6 (default). When JP12 +is jumpered parallel to the LBC-SDRAM, then /CS0 is for the +SODIMM flash and /CS6 is for the boot flash. Note that in this +alternate setting, you also need to switch SW2.8 to ON. Currently +u-boot doesn't support booting off the SODIMM in this alternate +setting without manually altering BR0/OR0 and BR6/OR6 in the +board config file appropriately. + + + Switches: + +The defaults are marked with a * + +Name Desc. ON OFF +------------------------------------------------------------------ +S1 Pwr toggle n/a n/a + +SW2.1 CFG_SYS_PLL0 1 0* +SW2.2 CFG_SYS_PLL1 1* 0 +SW2.3 CFG_SYS_PLL2 1* 0 +SW2.4 CFG_SYS_PLL3 1 0* +SW2.5 CFG_CORE_PLL0 1* 0 +SW2.6 CFG_CORE_PLL1 1 0* +SW2.7 CFG_CORE_PLL2 1* 0 +SW2.8 CFG_ROM_LOC1 1 0* + +SW3.1 CFG_HOST_AGT0 1* 0 +SW3.2 CFG_HOST_AGT1 1* 0 +SW3.3 CFG_HOST_AGT2 1* 0 +SW3.4 CFG_IO_PORTS0 1* 0 +SW3.5 CFG_IO_PORTS0 1 0* +SW3.6 CFG_IO_PORTS0 1 0* + +SerDes CLK(MHz) SW5.1 SW5.2 +---------------------------------------------- +25 0 0 +100* 1 0 +125 0 1 +200 1 1 + +SerDes CLK spread SW5.3 SW5.4 +---------------------------------------------- ++/- 0.25% 0 0 +-0.50% 1 0 +-0.75% 0 1 +No Spread* 1 1 + +SW4 settings are readable from the EPLD and are currently not used for +any hardware settings (i.e. user configuration switches). + + LEDs: + +Name Desc. ON OFF +------------------------------------------------------------------ +D13 PCI/PCI-X PCI-X PCI +D14 3.3V PWR 3.3V no power +D15 SYSCLK 66MHz 33MHz + + + Default Memory Map: + +start end CS<n> width Desc. +---------------------------------------------------------------------- +0000_0000 0fff_ffff MCS0,1 64 DDR2 (256MB) +f000_0000 f7ff_ffff CS3,4 32 LB SDRAM (128MB) +f800_0000 f8b0_1fff CS5 - EPLD +fb80_0000 ff7f_ffff CS6 32 SODIMM flash (64MB) +ff80_0000 ffff_ffff CS0 8 Boot flash (8MB) + +The EPLD on CS5 demuxes the following devices at the following offsets: + +offset size width device +-------------------------------------------------------- +0 1fff 8 7 segment display LED +10_0000 1fff 4 user switches +30_0000 1fff 4 HW Rev. register +b0_0000 1fff 8 8kB EEPROM diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c index aa877c65fd3..425eb181bf0 100644 --- a/drivers/misc/fsl_law.c +++ b/drivers/misc/fsl_law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008-2009 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -29,7 +29,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define LAWAR_EN 0x80000000 /* number of LAWs in the hw implementation */ #if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \ defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555) @@ -42,10 +41,62 @@ DECLARE_GLOBAL_DATA_PTR; defined(CONFIG_P1011) || defined(CONFIG_P1020) || \ defined(CONFIG_P2010) || defined(CONFIG_P2020) #define FSL_HW_NUM_LAWS 12 +#elif defined(CONFIG_PPC_P4080) +#define FSL_HW_NUM_LAWS 32 #else #error FSL_HW_NUM_LAWS not defined for this platform #endif +#ifdef CONFIG_FSL_CORENET +void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id) +{ + volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); + + gd->used_laws |= (1 << idx); + + out_be32(&ccm->law[idx].lawar, 0); + out_be32(&ccm->law[idx].lawbarh, ((u64)addr >> 32)); + out_be32(&ccm->law[idx].lawbarl, addr & 0xffffffff); + out_be32(&ccm->law[idx].lawar, LAW_EN | ((u32)id << 20) | (u32)sz); + + /* Read back so that we sync the writes */ + in_be32(&ccm->law[idx].lawar); +} + +void disable_law(u8 idx) +{ + volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); + + gd->used_laws &= ~(1 << idx); + + out_be32(&ccm->law[idx].lawar, 0); + out_be32(&ccm->law[idx].lawbarh, 0); + out_be32(&ccm->law[idx].lawbarl, 0); + + /* Read back so that we sync the writes */ + in_be32(&ccm->law[idx].lawar); + + return; +} + +static int get_law_entry(u8 i, struct law_entry *e) +{ + volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR); + u32 lawar; + + lawar = in_be32(&ccm->law[i].lawar); + + if (!(lawar & LAW_EN)) + return 0; + + e->addr = ((u64)in_be32(&ccm->law[i].lawbarh) << 32) | + in_be32(&ccm->law[i].lawbarl); + e->size = lawar & 0x3f; + e->trgt_id = (lawar >> 20) & 0xff; + + return 1; +} +#else void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); @@ -56,12 +107,49 @@ void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id) out_be32(lawar, 0); out_be32(lawbar, addr >> 12); - out_be32(lawar, LAWAR_EN | ((u32)id << 20) | (u32)sz); + out_be32(lawar, LAW_EN | ((u32)id << 20) | (u32)sz); /* Read back so that we sync the writes */ in_be32(lawar); } +void disable_law(u8 idx) +{ + volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); + volatile u32 *lawbar = base + 8 * idx; + volatile u32 *lawar = base + 8 * idx + 2; + + gd->used_laws &= ~(1 << idx); + + out_be32(lawar, 0); + out_be32(lawbar, 0); + + /* Read back so that we sync the writes */ + in_be32(lawar); + + return; +} + +static int get_law_entry(u8 i, struct law_entry *e) +{ + volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); + volatile u32 *lawbar = base + 8 * i; + volatile u32 *lawar = base + 8 * i + 2; + u32 temp; + + temp = in_be32(lawar); + + if (!(temp & LAW_EN)) + return 0; + + e->addr = (u64)in_be32(lawbar) << 12; + e->size = temp & 0x3f; + e->trgt_id = (temp >> 20) & 0xff; + + return 1; +} +#endif + int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { u32 idx = ffz(gd->used_laws); @@ -94,18 +182,30 @@ int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) return idx; } -void disable_law(u8 idx) +struct law_entry find_law(phys_addr_t addr) { - volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08); - volatile u32 *lawbar = base + 8 * idx; - volatile u32 *lawar = base + 8 * idx + 2; + struct law_entry entry; + int i; - gd->used_laws &= ~(1 << idx); + entry.index = -1; + entry.addr = 0; + entry.size = 0; + entry.trgt_id = 0; - out_be32(lawar, 0); - out_be32(lawbar, 0); + for (i = 0; i < FSL_HW_NUM_LAWS; i++) { + u64 upper; - return; + if (!get_law_entry(i, &entry)) + continue; + + upper = entry.addr + (2ull << entry.size); + if ((addr >= entry.addr) && (addr < upper)) { + entry.index = i; + break; + } + } + + return entry; } void print_laws(void) @@ -173,7 +273,13 @@ void init_laws(void) { int i; +#if FSL_HW_NUM_LAWS < 32 gd->used_laws = ~((1 << FSL_HW_NUM_LAWS) - 1); +#elif FSL_HW_NUM_LAWS == 32 + gd->used_laws = 0; +#else +#error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes +#endif for (i = 0; i < num_law_entries; i++) { if (law_table[i].index == -1) diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 885542c1e9f..87944bfad57 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -450,7 +450,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - printf("\n PCIE%x on bus %02x - %02x\n", pci_info->pci_num, + printf(" PCIE%x on bus %02x - %02x\n", pci_info->pci_num, hose->first_busno, hose->last_busno); return(hose->last_busno + 1); diff --git a/include/asm-ppc/config.h b/include/asm-ppc/config.h index 5670d06a441..e35b0b77fc8 100644 --- a/include/asm-ppc/config.h +++ b/include/asm-ppc/config.h @@ -40,9 +40,11 @@ #if defined(CONFIG_MPC8572) || defined(CONFIG_P1020) || \ defined(CONFIG_P2020) || defined(CONFIG_MPC8641) -#define CONFIG_MAX_CPUS 2 +#define CONFIG_MAX_CPUS 2 +#elif defined(CONFIG_PPC_P4080) +#define CONFIG_MAX_CPUS 8 #else -#define CONFIG_MAX_CPUS 1 +#define CONFIG_MAX_CPUS 1 #endif #endif /* _ASM_CONFIG_H_ */ diff --git a/include/asm-ppc/fsl_law.h b/include/asm-ppc/fsl_law.h index e06a1a6e0e1..31bb7545b53 100644 --- a/include/asm-ppc/fsl_law.h +++ b/include/asm-ppc/fsl_law.h @@ -1,8 +1,18 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + #ifndef _FSL_LAW_H_ #define _FSL_LAW_H_ #include <asm/io.h> +#define LAW_EN 0x80000000 + #define SET_LAW_ENTRY(idx, a, sz, trgt) \ { .index = idx, .addr = a, .size = sz, .trgt_id = trgt } @@ -36,6 +46,25 @@ enum law_size { LAW_SIZE_32G, }; +#ifdef CONFIG_FSL_CORENET +enum law_trgt_if { + LAW_TRGT_IF_PCIE_1 = 0x00, + LAW_TRGT_IF_PCIE_2 = 0x01, + LAW_TRGT_IF_PCIE_3 = 0x02, + LAW_TRGT_IF_RIO_1 = 0x08, + LAW_TRGT_IF_RIO_2 = 0x09, + + LAW_TRGT_IF_DDR_1 = 0x10, + LAW_TRGT_IF_DDR_2 = 0x11, /* 2nd controller */ + LAW_TRGT_IF_DDR_INTRLV = 0x14, + + LAW_TRGT_IF_BMAN = 0x18, + LAW_TRGT_IF_DCSR = 0x1d, + LAW_TRGT_IF_LBC = 0x1f, + LAW_TRGT_IF_QMAN = 0x3c, +}; +#define LAW_TRGT_IF_DDR LAW_TRGT_IF_DDR_1 +#else enum law_trgt_if { LAW_TRGT_IF_PCI = 0x00, LAW_TRGT_IF_PCI_2 = 0x01, @@ -64,6 +93,7 @@ enum law_trgt_if { #if defined(CONFIG_MPC8572) || defined(CONFIG_P2020) #define LAW_TRGT_IF_PCIE_3 LAW_TRGT_IF_PCI #endif +#endif /* CONFIG_FSL_CORENET */ struct law_entry { int index; @@ -76,6 +106,7 @@ extern void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if extern int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id); extern int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id); extern int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id); +extern struct law_entry find_law(phys_addr_t addr); extern void disable_law(u8 idx); extern void init_laws(void); extern void print_laws(void); diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h index a28082e56e6..5723de643a4 100644 --- a/include/asm-ppc/fsl_lbc.h +++ b/include/asm-ppc/fsl_lbc.h @@ -311,9 +311,21 @@ */ #define LCRR_CLKDIV 0x0000001F #define LCRR_CLKDIV_SHIFT 0 +#if defined(CONFIG_MPC83xx) || defined (CONFIG_MPC8540) || \ + defined(CONFIG_MPC8541) || defined (CONFIG_MPC8555) || \ + defined(CONFIG_MPC8560) #define LCRR_CLKDIV_2 0x00000002 #define LCRR_CLKDIV_4 0x00000004 #define LCRR_CLKDIV_8 0x00000008 +#elif defined(CONFIG_FSL_CORENET) +#define LCRR_CLKDIV_8 0x00000002 +#define LCRR_CLKDIV_16 0x00000004 +#define LCRR_CLKDIV_32 0x00000008 +#else +#define LCRR_CLKDIV_4 0x00000002 +#define LCRR_CLKDIV_8 0x00000004 +#define LCRR_CLKDIV_16 0x00000008 +#endif /* LTEDR - Transfer Error Check Disable Register */ diff --git a/include/asm-ppc/fsl_pci.h b/include/asm-ppc/fsl_pci.h index b9972dabe37..2790da7ed16 100644 --- a/include/asm-ppc/fsl_pci.h +++ b/include/asm-ppc/fsl_pci.h @@ -173,6 +173,18 @@ struct fsl_pci_info { int fsl_pci_init_port(struct fsl_pci_info *pci_info, struct pci_controller *hose, int busno); +#define SET_STD_PCI_INFO(x, num) \ +{ \ + x.regs = CONFIG_SYS_PCI##num##_ADDR; \ + x.mem_bus = CONFIG_SYS_PCI##num##_MEM_BUS; \ + x.mem_phys = CONFIG_SYS_PCI##num##_MEM_PHYS; \ + x.mem_size = CONFIG_SYS_PCI##num##_MEM_SIZE; \ + x.io_bus = CONFIG_SYS_PCI##num##_IO_BUS; \ + x.io_phys = CONFIG_SYS_PCI##num##_IO_PHYS; \ + x.io_size = CONFIG_SYS_PCI##num##_IO_SIZE; \ + x.pci_num = num; \ +} + #define SET_STD_PCIE_INFO(x, num) \ { \ x.regs = CONFIG_SYS_PCIE##num##_ADDR; \ diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index e7d412dba23..100dfe10692 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -16,6 +16,29 @@ #include <asm/fsl_i2c.h> #include <asm/fsl_lbc.h> +typedef struct ccsr_local { + u32 ccsrbarh; /* 0x0 - Control Configuration Status Registers Base Address Register High */ + u32 ccsrbarl; /* 0x4 - Control Configuration Status Registers Base Address Register Low */ + u32 ccsrar; /* 0x8 - Configuration, Control, and Status Attribute Register */ +#define CCSRAR_C 0x80000000 /* Commit */ + u8 res1[4]; + u32 altcbarh; /* 0x10 - Alternate Configuration Base Address Register High */ + u32 altcbarl; /* 0x14 - Alternate Configuration Base Address Register Low */ + u32 altcar; /* 0x18 - Alternate Configuration Attribute Register */ + u8 res2[4]; + u32 bstrh; /* 0x20 - Boot space translation register high */ + u32 bstrl; /* 0x24 - Boot space translation register Low */ + u32 bstrar; /* 0x28 - Boot space translation attributes register */ + u8 res3[0xbd4]; + struct { + u32 lawbarh; /* 0xc00 + n * 0x10 - LAW0 base address register high */ + u32 lawbarl; /* 0xc04 + n * 0x10 - LAW0 base address register low */ + u32 lawar; /* 0xc08 + n * 0x10 - LAW0 attributes register */ + u8 res4[4]; + } law[32]; + u8 res35[0x204]; +} ccsr_local_t; + /* * Local-Access Registers and ECM Registers(0x0000-0x2000) */ @@ -165,7 +188,21 @@ typedef struct ccsr_ddr { uint debug_2; uint debug_3; uint debug_4; - char res12[240]; + uint debug_5; + uint debug_6; + uint debug_7; + uint debug_8; + uint debug_9; + uint debug_10; + uint debug_11; + uint debug_12; + uint debug_13; /* +0xF30 */ + uint debug_14; + uint debug_15; + uint debug_16; + uint debug_17; + uint debug_18; /* +0xF44 */ + char res12[184]; } ccsr_ddr_t; /* @@ -1531,6 +1568,193 @@ typedef struct par_io { /* * Global Utilities Register Block(0xe_0000-0xf_ffff) */ +#ifdef CONFIG_FSL_CORENET +typedef struct ccsr_gur { + u32 porsr1; /* 0xe0000 - POR status register */ + u8 res1[28]; /* 0xe0004 - 0xe001c Reserved: PORSRn */ + u32 gpporcr1; /* 0xe0020 - General-purpose POR configuration register */ + u8 res2[12]; + u32 gpiocr; /* 0xe0030 - GPIO control register */ + u8 res3[12]; + u32 gpoutdr; /* 0xe0040 - General-purpose output data register */ + u8 res4[12]; + u32 gpindr; /* 0xe0050 - General-purpose input data register */ + u8 res5[12]; + u32 pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */ + u8 res6[12]; + u32 devdisr; /* 0xe0070 - Device disable control */ +#define FSL_CORENET_DEVDISR_PCIE1 0x80000000 +#define FSL_CORENET_DEVDISR_PCIE2 0x40000000 +#define FSL_CORENET_DEVDISR_PCIE3 0x20000000 +#define FSL_CORENET_DEVDISR_RMU 0x08000000 +#define FSL_CORENET_DEVDISR_SRIO1 0x04000000 +#define FSL_CORENET_DEVDISR_SRIO2 0x02000000 +#define FSL_CORENET_DEVDISR_DMA1 0x00400000 +#define FSL_CORENET_DEVDISR_DMA2 0x00200000 +#define FSL_CORENET_DEVDISR_DDR1 0x00100000 +#define FSL_CORENET_DEVDISR_DDR2 0x00080000 +#define FSL_CORENET_DEVDISR_DBG 0x00010000 +#define FSL_CORENET_DEVDISR_NAL 0x00008000 +#define FSL_CORENET_DEVDISR_ELBC 0x00001000 +#define FSL_CORENET_DEVDISR_USB1 0x00000800 +#define FSL_CORENET_DEVDISR_USB2 0x00000400 +#define FSL_CORENET_DEVDISR_ESDHC 0x00000100 +#define FSL_CORENET_DEVDISR_GPIO 0x00000080 +#define FSL_CORENET_DEVDISR_ESPI 0x00000040 +#define FSL_CORENET_DEVDISR_I2C1 0x00000020 +#define FSL_CORENET_DEVDISR_I2C2 0x00000010 +#define FSL_CORENET_DEVDISR_DUART1 0x00000002 +#define FSL_CORENET_DEVDISR_DUART2 0x00000001 + u8 res7[12]; + u32 powmgtcsr; /* 0xe0080 - Power management status and control register */ + u8 res8[12]; + u32 coredisru; /* 0xe0090 - uppper portion for support of 64 cores */ + u32 coredisrl; /* 0xe0094 - lower portion for support of 64 cores */ + u8 res9[8]; + u32 pvr; /* 0xe00a0 - Processor version register */ + u32 svr; /* 0xe00a4 - System version register */ + u8 res10[8]; + u32 rstcr; /* 0xe00b0 - Reset control register */ + u32 rstrqpblsr; /* 0xe00b4 - Reset request preboot loader status register */ + u8 res11[8]; + u32 rstrqmr1; /* 0xe00c0 - Reset request mask register */ + u8 res12[4]; /* Reserved: RSTRQMR2 */ + u32 rstrqsr1; /* 0xe00c8 - Reset request status register */ + u8 res13[4]; /* Reserved: RSTRQSR2 */ + u8 res14[4]; /* Reserved: RSTRQWDTMRU */ + u32 rstrqwdtmrl; /* 0xe00d4 - Reset request WDT mask register */ + u8 res15[4]; /* Reserved: RSTRQWDTSRU */ + u32 rstrqwdtsrl; /* 0xe00dc - Reset request WDT status register */ + u8 res16[4]; /* Reserved: BRRU max total of 2 for up to 64 cores */ + u32 brrl; /* 0xe00e4 Boot release register */ + u8 res17[24]; + u32 rcwsr[16]; /* 0xe0100 - 0xe013c: Reset control word status register */ +#define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000 +#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00008000 +#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 15 +#define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000 +#define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000 +#define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000 + u8 res18[192]; /* Reserved: RCWSRn (max total of 64)*/ + u32 scratchrw[4]; /* 0xe0200 - 0xe020c: Scratch Read/Write register */ + u8 res19[240]; /* Reserved: SCRATCHRWn (max total of 64)*/ + u32 scratchw1r[4]; /* 0xe0300 - 0xe030c: Scratch Read register (Write once) */ + u8 res20[240]; /* Reserved: SCRATCHW1Rn (max total of 64)*/ + u32 scrtsr[8]; /* 0xe0400 - 0xe041c: Core reset status register */ + u8 res21[224]; /* Reserved: CRSTSRn (max total of 64 for up to 64 cores)*/ + u32 pex1liodnr; /* 0xe0500 PCI Express 1 Logical I/O Device Number register*/ + u32 pex2liodnr; /* 0xe0504 PCI Express 2 Logical I/O Device Number register*/ + u32 pex3liodnr; /* 0xe0508 PCI Express 3 Logical I/O Device Number register*/ + u32 pex4liodnr; /* 0xe050c PCI Express 4 Logical I/O Device Number register*/ + u32 rio1liodnr; /* 0xe0510 RIO 1 Logical I/O Device Number register*/ + u32 rio2liodnr; /* 0xe0514 RIO 2 Logical I/O Device Number register*/ + u32 rio3liodnr; /* 0xe0518 RIO 3 Logical I/O Device Number register*/ + u32 rio4liodnr; /* 0xe051c RIO 4 Logical I/O Device Number register*/ + u32 usb1liodnr; /* 0xe0520 USB 1 Logical I/O Device Number register*/ + u32 usb2liodnr; /* 0xe0524 USB 2 Logical I/O Device Number register*/ + u32 usb3liodnr; /* 0xe0528 USB 3 Logical I/O Device Number register*/ + u32 usb4liodnr; /* 0xe052c USB 4 Logical I/O Device Number register*/ + u32 sdmmc1liodnr; /* 0xe0530 SD/MMC 1 Logical I/O Device Number register*/ + u32 sdmmc2liodnr; /* 0xe0534 SD/MMC 2 Logical I/O Device Number register*/ + u32 sdmmc3liodnr; /* 0xe0538 SD/MMC 3 Logical I/O Device Number register*/ + u32 sdmmc4liodnr; /* 0xe053c SD/MMC 4 Logical I/O Device Number register*/ + u32 rmuliodnr; /* 0xe0540 RIO Message Unit Logical I/O Device Number register*/ + u32 rduliodnr; /* 0xe0544 RIO Doorbell Unit Logical I/O Device Number register*/ + u32 rpwuliodnr; /* 0xe0548 RIO Port Write Unit Logical I/O Device Number register*/ + u8 res22[52]; /* Reserved: for future LIODN register expansion */ + u32 dma1liodnr; /* 0xe0580 DMA 1 Logical I/O Device Number register*/ + u32 dma2liodnr; /* 0xe0584 DMA 2 Logical I/O Device Number register*/ + u32 dma3liodnr; /* 0xe0588 DMA 3 Logical I/O Device Number register*/ + u32 dma4liodnr; /* 0xe058c DMA 4 Logical I/O Device Number register*/ + u8 res23[48]; /* Reserved: for future LIODN register expansion */ + u8 res24[64]; /* Reserved */ + u32 pblsr; /* 0xe0600 Preboot loader status register*/ + u32 pamubypenr; /* 0xe0604 PAMU bypass enable register*/ + u32 dmacr1; /* 0xe0608 DMA control register*/ + u8 res25[4]; /* Reserved: DMACR2 (max total of 2)*/ + u32 gensr1; /* 0xe0610 General status register*/ + u8 res26[12]; /* Reserved: GENSRn (max total of 4)*/ + u32 gencr1; /* 0xe0620 General control register*/ + u8 res27[12]; /* Reserved: GENCRn (max total of 4)*/ + u8 res28[4]; /* Reserved: CGENSRU (upper portion for support of 64 cores) */ + u32 cgensrl; /* 0xe0634 Core general status register*/ + u8 res29[8]; /* Reserved */ + u8 res30[4]; /* Reserved: CGENCRU (upper portion for support of 64 cores) */ + u32 cgencrl; /* 0xe0634 Core general control register*/ + u8 res31[184]; /* Reserved 0xe0648 - 0xe06fc */ + u32 sriopstecr; /* 0xe0700 SRIO prescaler timer enable control register*/ + u8 res32[2300]; /* Reserved 0xe0704 - 0xe0ffc */ +} ccsr_gur_t; + +typedef struct ccsr_clk { + u32 clkc0csr; /* 0xe1000 - Core 0 Clock control/status register */ + u8 res1[0x1c]; + u32 clkc1csr; /* 0xe1020 - Core 1 Clock control/status register */ + u8 res2[0x1c]; + u32 clkc2csr; /* 0xe1040 - Core 2 Clock control/status register */ + u8 res3[0x1c]; + u32 clkc3csr; /* 0xe1060 - Core 3 Clock control/status register */ + u8 res4[0x1c]; + u32 clkc4csr; /* 0xe1080 - Core 4 Clock control/status register */ + u8 res5[0x1c]; + u32 clkc5csr; /* 0xe10a0 - Core 5 Clock control/status register */ + u8 res6[0x1c]; + u32 clkc6csr; /* 0xe10c0 - Core 6 Clock control/status register */ + u8 res7[0x1c]; + u32 clkc7csr; /* 0xe10e0 - Core 7 Clock control/status register */ + u8 res8[0x71c]; + u32 pllc1gsr; /* 0xe1800 - Cluster PLL 1 General Status Register */ + u8 res10[0x1c]; + u32 pllc2gsr; /* 0xe1820 - Cluster PLL 2 General Status Register */ + u8 res11[0x1c]; + u32 pllc3gsr; /* 0xe1840 - Cluster PLL 3 General Status Register */ + u8 res12[0x1c]; + u32 pllc4gsr; /* 0xe1860 - Cluster PLL 4 General Status Register */ + u8 res13[0x39c]; + u32 pllpgsr; /* 0xe1c00 - Platform PLL General Status Register */ + u8 res14[0x1c]; + u32 plldgsr; /* 0xe1c20 - DDR PLL General Status Register */ + u8 res15[0x3dc]; +} ccsr_clk_t; + +typedef struct ccsr_rcpm { + u8 res1[4]; /* 0xe2000 - Reserved */ + u32 cdozsrl; /* 0xe2004 - Core Doze Status Register */ + u8 res2[4]; /* 0xe2008 - Reserved */ + u32 cdozcrl; /* 0xe200c - Core Doze Control Register */ + u8 res3[4]; /* 0xe2010 - Reserved */ + u32 cnapsrl; /* 0xe2014 - Core Nap Status Register */ + u8 res4[4]; /* 0xe2018 - Reserved */ + u32 cnapcrl; /* 0xe201c - Core Nap Control Register */ + u8 res5[4]; /* 0xe2020 - Reserved */ + u32 cdozpsrl; /* 0xe2024 - Core Doze Previous Status Register */ + u8 res6[4]; /* 0xe2028 - Reserved */ + u32 cdozpcrl; /* 0xe202c - Core Doze Previous Control Register */ + u8 res7[4]; /* 0xe2030 - Reserved */ + u32 cwaitsrl; /* 0xe2034 - Core Wait Status Register */ + u8 res8[8]; /* Reserved */ + u32 powmgtcsr; /* 0xe2040 - Power Mangement Control & Status Register */ + u8 res9[12]; /* Reserved */ + u32 ippdexpcr0; /* 0xe2050 - IP Powerdown Exception Control Register 0 */ + u8 res10[12]; /* Reserved */ + u8 res11[4]; /* Reserved */ + u32 cpmimrl; /* 0xe2064 - Core Power Management Interrupt Masking Register */ + u8 res12[4]; /* Reserved */ + u32 cpmcimrl; /* 0xe206c - Core Power Management Critical Interrupt Masking Register */ + u8 res13[4]; /* Reserved */ + u32 cpmmcimrl; /* 0xe2074 - Core Power Management Machine Check Interrupt Masking Register */ + u8 res14[4]; /* Reserved */ + u32 cpmnmimrl; /* 0xe207c - Core Power Management NMI Masking Register */ + u8 res15[4]; /* Reserved */ + u32 ctbenrl; /* 0xe2084 - Core Time Base Enable Register */ + u8 res16[4]; /* Reserved */ + u32 ctbclkselrl; /* 0xe208c - Core Time Base Clock Select Register */ + u8 res17[4]; /* Reserved */ + u32 ctbhltcrl; /* 0xe2094 - Core Time Base Halt Control Register */ + u8 res18[0xf68]; +} ccsr_rcpm_t; + +#else typedef struct ccsr_gur { uint porpllsr; /* 0xe0000 - POR PLL ratio status register */ #ifdef CONFIG_MPC8536 @@ -1542,6 +1766,8 @@ typedef struct ccsr_gur { #endif #define MPC85xx_PORPLLSR_QE_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_QE_RATIO_SHIFT 25 +#define MPC85xx_PORPLLSR_PLAT_RATIO 0x0000003e +#define MPC85xx_PORPLLSR_PLAT_RATIO_SHIFT 1 uint porbmsr; /* 0xe0004 - POR boot mode status register */ #define MPC85xx_PORBMSR_HA 0x00070000 #define MPC85xx_PORBMSR_HA_SHIFT 16 @@ -1645,42 +1871,65 @@ typedef struct ccsr_gur { uint tsec34ioovcr; /* 0xe0f2c - eTSEC 3/4 IO override control */ char res15[61648]; /* 0xe0f30 to 0xefffff */ } ccsr_gur_t; +#endif + +#ifdef CONFIG_FSL_CORENET +#define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 +#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 +#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000 +#define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000 +#define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000 +#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x100000 +#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x110000 +#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x114000 +#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000 +#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000 +#define CONFIG_SYS_MPC85xx_QMAN_OFFSET 0x318000 +#define CONFIG_SYS_MPC85xx_BMAN_OFFSET 0x31a000 +#else +#define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000 +#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000 +#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x5000 +#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x6000 +#define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x7000 +#define CONFIG_SYS_MPC85xx_PCIX_OFFSET 0x8000 +#define CONFIG_SYS_MPC85xx_PCIX2_OFFSET 0x9000 +#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0xF000 +#define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x18000 +#define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000 +#define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000 +#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000 +#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000 +#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 +#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 +#define CONFIG_SYS_MPC85xx_CPM_OFFSET 0x80000 +#endif + +#define CONFIG_SYS_MPC85xx_PIC_OFFSET 0x40000 +#define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000 -#define CONFIG_SYS_MPC85xx_GUTS_OFFSET (0xE0000) +#define CONFIG_SYS_MPC85xx_QMAN_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_QMAN_OFFSET) +#define CONFIG_SYS_MPC85xx_BMAN_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_BMAN_OFFSET) #define CONFIG_SYS_MPC85xx_GUTS_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET) -#define CONFIG_SYS_MPC85xx_ECM_OFFSET (0x0000) +#define CONFIG_SYS_FSL_CORENET_CCM_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CCM_OFFSET) +#define CONFIG_SYS_FSL_CORENET_CLK_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CLK_OFFSET) +#define CONFIG_SYS_FSL_CORENET_RCPM_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET) #define CONFIG_SYS_MPC85xx_ECM_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET) -#define CONFIG_SYS_MPC85xx_DDR_OFFSET (0x2000) #define CONFIG_SYS_MPC85xx_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET) -#define CONFIG_SYS_MPC85xx_DDR2_OFFSET (0x6000) #define CONFIG_SYS_MPC85xx_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET) -#define CONFIG_SYS_MPC85xx_LBC_OFFSET (0x5000) #define CONFIG_SYS_MPC85xx_LBC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET) -#define CONFIG_SYS_MPC85xx_ESPI_OFFSET (0x7000) #define CONFIG_SYS_MPC85xx_ESPI_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET) -#define CONFIG_SYS_MPC85xx_PCIX_OFFSET (0x8000) #define CONFIG_SYS_MPC85xx_PCIX_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX_OFFSET) -#define CONFIG_SYS_MPC85xx_PCIX2_OFFSET (0x9000) #define CONFIG_SYS_MPC85xx_PCIX2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX2_OFFSET) -#define CONFIG_SYS_MPC85xx_GPIO_OFFSET (0xF000) -#define CONFIG_SYS_MPC85xx_GPIO_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GPIO_OFFSET) -#define CONFIG_SYS_MPC85xx_SATA1_OFFSET (0x18000) +#define CONFIG_SYS_MPC85xx_GPIO_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GPIO_OFFSET) #define CONFIG_SYS_MPC85xx_SATA1_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA1_OFFSET) -#define CONFIG_SYS_MPC85xx_SATA2_OFFSET (0x19000) #define CONFIG_SYS_MPC85xx_SATA2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA2_OFFSET) -#define CONFIG_SYS_MPC85xx_L2_OFFSET (0x20000) #define CONFIG_SYS_MPC85xx_L2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_L2_OFFSET) -#define CONFIG_SYS_MPC85xx_DMA_OFFSET (0x21000) #define CONFIG_SYS_MPC85xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DMA_OFFSET) -#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET (0x2e000) #define CONFIG_SYS_MPC85xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESDHC_OFFSET) -#define CONFIG_SYS_MPC85xx_PIC_OFFSET (0x40000) #define CONFIG_SYS_MPC85xx_PIC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET) -#define CONFIG_SYS_MPC85xx_CPM_OFFSET (0x80000) #define CONFIG_SYS_MPC85xx_CPM_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_CPM_OFFSET) -#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET (0xE3000) #define CONFIG_SYS_MPC85xx_SERDES1_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET) -#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET (0xE3100) #define CONFIG_SYS_MPC85xx_SERDES2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET) #define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000 #define CONFIG_SYS_MPC85xx_USB_ADDR \ diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index a019d0b390b..d516d91403d 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -504,13 +504,7 @@ extern int num_tlb_entries; #endif #endif -#if defined(CONFIG_MPC86xx) -#define LAWBAR_BASE_ADDR 0x00FFFFFF -#define LAWAR_TRGT_IF 0x01F00000 -#else -#define LAWBAR_BASE_ADDR 0x000FFFFF -#define LAWAR_TRGT_IF 0x00F00000 -#endif +#ifdef CONFIG_MPC83xx #define LAWAR_EN 0x80000000 #define LAWAR_SIZE 0x0000003F @@ -554,6 +548,7 @@ extern int num_tlb_entries; #define LAWAR_SIZE_8G (LAWAR_SIZE_BASE+22) #define LAWAR_SIZE_16G (LAWAR_SIZE_BASE+23) #define LAWAR_SIZE_32G (LAWAR_SIZE_BASE+24) +#endif #ifdef CONFIG_440 /* General */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 3764a5a51d5..d009957d8b0 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -1031,6 +1031,10 @@ #define SVR_P2010_E 0x80EB00 #define SVR_P2020 0x80E200 #define SVR_P2020_E 0x80EA00 +#define SVR_P4040 0x820100 +#define SVR_P4040_E 0x820900 +#define SVR_P4080 0x820000 +#define SVR_P4080_E 0x820800 #define SVR_8610 0x80A000 #define SVR_8641 0x809000 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 4746e2ead56..faca8059a1f 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -27,7 +27,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#ifdef CONFIG_MPC8536DS_36BIT +#ifdef CONFIG_MK_36BIT #define CONFIG_PHYS_64BIT 1 #endif diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 55c1f29b192..000f8f62d62 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -27,6 +27,10 @@ #ifndef __CONFIG_H #define __CONFIG_H +#ifdef CONFIG_MK_36BIT +#define CONFIG_PHYS_64BIT +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 6d44d6c8ddb..8e97ad06819 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -30,6 +30,19 @@ #ifndef __CONFIG_H #define __CONFIG_H +#ifdef CONFIG_MK_P1011RDB +#define CONFIG_P1011 +#endif +#ifdef CONFIG_MK_P1020RDB +#define CONFIG_P1020 +#endif +#ifdef CONFIG_MK_P2010RDB +#define CONFIG_P2010 +#endif +#ifdef CONFIG_MK_P2020RDB +#define CONFIG_P2020 +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 2a2b9acf579..b48c1999f8f 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -27,6 +27,10 @@ #ifndef __CONFIG_H #define __CONFIG_H +#ifdef CONFIG_MK_36BIT +#define CONFIG_PHYS_64BIT +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 272b5dd56cb..7cde39bf2a5 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -24,22 +24,25 @@ * MA 02111-1307 USA */ -/* mpc8560ads board configuration file */ -/* please refer to doc/README.mpc85xx for more info */ -/* make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file +/* + * sbc8540 board configuration file. */ #ifndef __CONFIG_H #define __CONFIG_H -#if XXX -#define DEBUG /* General debug */ -#define ET_DEBUG +/* + * Top level Makefile configuration choices + */ +#ifdef CONFIG_MK_66 +#define CONFIG_PCI_66 #endif + #define TSEC_DEBUG -/* High Level Configuration Options */ +/* + * High Level Configuration Options + */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h index 242466ae120..30642cdfef4 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/XPEDITE5170.h @@ -122,7 +122,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable */ -#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_2 | LCRR_EADC_3) +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_4 | LCRR_EADC_3) /* * NAND flash configuration diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index deda20843af..d79231b8b8b 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -103,7 +103,7 @@ * 0xfc00_0000 0xffff_ffff NOR Flash 1 64M non-cacheable */ -#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_4 | LCRR_EADC_3) +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_3) /* * NAND flash configuration diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 3c58ebe39b2..65e1afddc69 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -116,7 +116,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable */ -#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_4 | LCRR_EADC_3) +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_3) /* * NAND flash configuration diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 838b4db9ad4..d10792a22da 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -1,5 +1,5 @@ /* - * Copyright 2007 Wind River Systems <www.windriver.com> + * Copyright 2007,2009 Wind River Systems <www.windriver.com> * Copyright 2007 Embedded Specialties, Inc. * Copyright 2004, 2007 Freescale Semiconductor. * @@ -24,26 +24,49 @@ /* * sbc8548 board configuration file - * - * Please refer to doc/README.sbc85xx for more info. - * + * Please refer to doc/README.sbc8548 for more info. */ #ifndef __CONFIG_H #define __CONFIG_H -/* High Level Configuration Options */ +/* + * Top level Makefile configuration choices + */ +#ifdef CONFIG_MK_PCI +#define CONFIG_PCI +#define CONFIG_PCI1 +#endif + +#ifdef CONFIG_MK_66 +#define CONFIG_SYS_CLK_DIV 1 +#endif + +#ifdef CONFIG_MK_33 +#define CONFIG_SYS_CLK_DIV 2 +#endif + +#ifdef CONFIG_MK_PCIE +#define CONFIG_PCIE1 +#endif + +/* + * High Level Configuration Options + */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ #define CONFIG_MPC8548 1 /* MPC8548 specific */ #define CONFIG_SBC8548 1 /* SBC8548 board specific */ -#undef CONFIG_PCI /* enable any pci type devices */ -#undef CONFIG_PCI1 /* PCI controller 1 */ -#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ #undef CONFIG_RIO -#undef CONFIG_PCI2 -#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */ + +#ifdef CONFIG_PCI +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ +#endif +#ifdef CONFIG_PCIE1 +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#endif #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -52,7 +75,13 @@ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ -#define CONFIG_SYS_CLK_FREQ 66000000 /* SBC8548 default SYSCLK */ +/* + * Below assumes that CCB:SYSCLK remains unchanged at 6:1 via SW2:[1-4] + */ +#ifndef CONFIG_SYS_CLK_DIV +#define CONFIG_SYS_CLK_DIV 1 /* 2, if 33MHz PCI card installed */ +#endif +#define CONFIG_SYS_CLK_FREQ (66000000 / CONFIG_SYS_CLK_DIV) /* * These can be toggled for performance analysis, otherwise use default. @@ -164,6 +193,7 @@ */ #define CONFIG_SYS_BOOT_BLOCK 0xff800000 /* start of 8MB Flash */ +#define CONFIG_SYS_ALT_FLASH 0xfb800000 /* 64MB "user" flash */ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK /* start of FLASH 16M */ #define CONFIG_SYS_BR0_PRELIM 0xff800801 @@ -172,9 +202,10 @@ #define CONFIG_SYS_OR0_PRELIM 0xff806e65 #define CONFIG_SYS_OR6_PRELIM 0xf8006e65 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \ + CONFIG_SYS_ALT_FLASH} +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ #undef CONFIG_SYS_FLASH_CHECKSUM #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ @@ -196,13 +227,13 @@ #define CONFIG_SYS_EEPROM_BASE 0xf8b00000 /* - * SDRAM on the Local Bus + * SDRAM on the Local Bus (CS3 and CS4) */ #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ +#define CONFIG_SYS_LBC_SDRAM_SIZE 128 /* LBC SDRAM is 128MB */ /* - * Base Register 3 and Option Register 3 configure SDRAM. + * Base Register 3 and Option Register 3 configure the 1st 1/2 SDRAM. * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. * * For BR3, need: @@ -220,7 +251,7 @@ #define CONFIG_SYS_BR3_PRELIM 0xf0001861 /* - * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. + * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64. * * For OR3, need: * 64MB mask for AM, OR3[0:7] = 1111 1100 @@ -235,6 +266,40 @@ #define CONFIG_SYS_OR3_PRELIM 0xfc006cc0 +/* + * Base Register 4 and Option Register 4 configure the 2nd 1/2 SDRAM. + * The base address, (SDRAM_BASE + 1/2*SIZE), is 0xf4000000. + * + * For BR4, need: + * Base address of 0xf4000000 = BR[0:16] = 1111 0100 0000 0000 0 + * port-size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = f4001861 + * + */ + +#define CONFIG_SYS_BR4_PRELIM 0xf4001861 + +/* + * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64. + * + * For OR4, need: + * 64MB mask for AM, OR3[0:7] = 1111 1100 + * XAM, OR3[17:18] = 11 + * 10 columns OR3[19-21] = 011 + * 12 rows OR3[23-25] = 011 + * EAD set for extra time OR[31] = 0 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0 + */ + +#define CONFIG_SYS_OR4_PRELIM 0xfc006cc0 + #define CONFIG_SYS_LBC_LCRR 0x00000002 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ @@ -274,7 +339,7 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 400000000 /* get_bus_freq(0) */ +#define CONFIG_SYS_NS16550_CLK (400000000 / CONFIG_SYS_CLK_DIV) #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} @@ -308,31 +373,27 @@ * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ +#define CONFIG_SYS_PCI_VIRT 0x80000000 /* 1G PCI TLB */ #define CONFIG_SYS_PCI_PHYS 0x80000000 /* 1G PCI TLB */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ - -#ifdef CONFIG_PCI2 -#define CONFIG_SYS_PCI2_MEM_BASE 0xa0000000 -#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE -#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI2_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI2_IO_PHYS 0xe2800000 -#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ -#endif +#define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000 +#define CONFIG_SYS_PCI1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 +#define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 8M */ #ifdef CONFIG_PCIE1 -#define CONFIG_SYS_PCIE1_MEM_BASE 0xa0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE +#define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ #endif #ifdef CONFIG_RIO @@ -343,14 +404,6 @@ #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */ #endif -#ifdef CONFIG_LEGACY -#define BRIDGE_ID 17 -#define VIA_ID 2 -#else -#define BRIDGE_ID 28 -#define VIA_ID 4 -#endif - #if defined(CONFIG_PCI) #define CONFIG_NET_MULTI @@ -359,7 +412,7 @@ #undef CONFIG_EEPRO100 #undef CONFIG_TULIP -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif /* CONFIG_PCI */ diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 46c94bf16be..a6b15f74c9c 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -24,16 +24,23 @@ * MA 02111-1307 USA */ -/* sbc8560 board configuration file */ -/* please refer to doc/README.sbc8560 for more info */ -/* make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file +/* + * sbc8560 board configuration file. */ #ifndef __CONFIG_H #define __CONFIG_H -/* High Level Configuration Options */ +/* + * Top level Makefile configuration choices + */ +#ifdef CONFIG_MK_66 +#define CONFIG_PCI_66 +#endif + +/* + * High Level Configuration Options + */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ diff --git a/include/e500.h b/include/e500.h index f8c82661a2d..e1708b9dc95 100644 --- a/include/e500.h +++ b/include/e500.h @@ -15,6 +15,12 @@ typedef struct unsigned long freqDDRBus; unsigned long freqLocalBus; unsigned long freqQE; +#ifdef CONFIG_SYS_DPAA_FMAN + unsigned long freqFMan[CONFIG_SYS_NUM_FMAN]; +#endif +#ifdef CONFIG_SYS_DPAA_PME + unsigned long freqPME; +#endif } MPC85xx_SYS_INFO; #endif /* _ASMLANGUAGE */ |