diff options
| -rw-r--r-- | Makefile | 1 | ||||
| -rw-r--r-- | README | 10 | ||||
| -rw-r--r-- | board/atmel/at91sam9261ek/at91sam9261ek.c | 9 | ||||
| -rw-r--r-- | board/mucmc52/mucmc52.c | 2 | ||||
| -rw-r--r-- | board/uc101/uc101.c | 2 | ||||
| -rw-r--r-- | common/cmd_bootm.c | 4 | ||||
| -rw-r--r-- | cpu/arm920t/s3c24x0/timer.c | 2 | ||||
| -rw-r--r-- | cpu/arm_cortexa8/omap3/board.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/nand_util.c | 2 | ||||
| -rw-r--r-- | drivers/net/smc911x.c | 4 | ||||
| -rw-r--r-- | lib_generic/zlib.c | 2 | ||||
| -rw-r--r-- | net/nfs.c | 13 |
12 files changed, 32 insertions, 21 deletions
@@ -3266,6 +3266,7 @@ zylonite_config : ######################################################################### apollon_config : unconfig + @mkdir -p $(obj)include @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk @@ -846,20 +846,20 @@ The following options need to be configured: Define this to use i/o functions instead of macros (some hardware wont work with macros) - CONFIG_DRIVER_SMC911X + CONFIG_SMC911X Support for SMSC's LAN911x and LAN921x chips - CONFIG_DRIVER_SMC911X_BASE + CONFIG_SMC911X_BASE Define this to hold the physical address of the device (I/O space) - CONFIG_DRIVER_SMC911X_32_BIT + CONFIG_SMC911X_32_BIT Define this if data bus is 32 bits - CONFIG_DRIVER_SMC911X_16_BIT + CONFIG_SMC911X_16_BIT Define this if data bus is 16 bits. If your processor automatically converts one 32 bit word to two 16 bit - words you may also try CONFIG_DRIVER_SMC911X_32_BIT. + words you may also try CONFIG_SMC911X_32_BIT. - USB Support: At the moment only the UHCI host controller is diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 2f6b599a6ba..7ead2b8977c 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -265,11 +265,12 @@ int board_init(void) } #ifdef CONFIG_DRIVER_DM9000 - int board_eth_init(bd_t *bis) - { +int board_eth_init(bd_t *bis) +{ return dm9000_initialize(bis); - } - #endif +} +#endif + int dram_init(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM; diff --git a/board/mucmc52/mucmc52.c b/board/mucmc52/mucmc52.c index bac49befffe..b4ed7357e44 100644 --- a/board/mucmc52/mucmc52.c +++ b/board/mucmc52/mucmc52.c @@ -31,6 +31,7 @@ */ #include <common.h> +#include <fdt_support.h> #include <mpc5xxx.h> #include <pci.h> #include <malloc.h> @@ -403,5 +404,6 @@ void pci_init_board (void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c index 4030b9d0d83..1485c0249b5 100644 --- a/board/uc101/uc101.c +++ b/board/uc101/uc101.c @@ -31,6 +31,7 @@ */ #include <common.h> +#include <fdt_support.h> #include <mpc5xxx.h> #include <pci.h> #include <malloc.h> @@ -376,5 +377,6 @@ void hw_watchdog_reset(void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index e0cb8695de9..efd6aec0cf1 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -475,8 +475,8 @@ cmd_tbl_t cmd_bootm_sub[] = { #ifdef CONFIG_OF_LIBFDT U_BOOT_CMD_MKENT(fdt, 0, 1, (void *)BOOTM_STATE_FDT, "", ""), #endif - U_BOOT_CMD_MKENT(bdt, 0, 1, (void *)BOOTM_STATE_OS_BD_T, "", ""), U_BOOT_CMD_MKENT(cmdline, 0, 1, (void *)BOOTM_STATE_OS_CMDLINE, "", ""), + U_BOOT_CMD_MKENT(bdt, 0, 1, (void *)BOOTM_STATE_OS_BD_T, "", ""), U_BOOT_CMD_MKENT(prep, 0, 1, (void *)BOOTM_STATE_OS_PREP, "", ""), U_BOOT_CMD_MKENT(go, 0, 1, (void *)BOOTM_STATE_OS_GO, "", ""), }; @@ -1022,8 +1022,8 @@ U_BOOT_CMD( #if defined(CONFIG_OF_LIBFDT) "\tfdt - relocate flat device tree\n" #endif - "\tbdt - OS specific bd_t processing\n" "\tcmdline - OS specific command line processing/setup\n" + "\tbdt - OS specific bd_t processing\n" "\tprep - OS specific prep before relocation or go\n" "\tgo - start OS" ); diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c index fcc6c0cb1b1..7d47354381c 100644 --- a/cpu/arm920t/s3c24x0/timer.c +++ b/cpu/arm920t/s3c24x0/timer.c @@ -198,6 +198,8 @@ void reset_cpu(ulong ignored) struct s3c24x0_watchdog *watchdog; #ifdef CONFIG_TRAB + extern void disable_vfd(void); + disable_vfd(); #endif diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c index dd2c94073b3..2aa69b383b4 100644 --- a/cpu/arm_cortexa8/omap3/board.c +++ b/cpu/arm_cortexa8/omap3/board.c @@ -328,7 +328,7 @@ usage: U_BOOT_CMD( nandecc, 2, 1, do_switch_ecc, - "nandecc - switch OMAP3 NAND ECC calculation algorithm\n", + "switch OMAP3 NAND ECC calculation algorithm", "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm" ); diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index bec927706f9..7085d42cc1b 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -452,7 +452,7 @@ static size_t get_len_incl_bad (nand_info_t *nand, loff_t offset, len_incl_bad += block_len; offset += block_len; - if ((offset + len_incl_bad) >= nand->size) + if (offset >= nand->size) break; } diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index c027abe9f7b..5d51406f6fa 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -37,7 +37,7 @@ void pkt_data_push(struct eth_device *dev, u32 addr, u32 val) \ #define mdelay(n) udelay((n)*1000) -static void smx911x_handle_mac_address(struct eth_device *dev) +static void smc911x_handle_mac_address(struct eth_device *dev) { unsigned long addrh, addrl; uchar *m = dev->enetaddr; @@ -155,7 +155,7 @@ static int smc911x_init(struct eth_device *dev, bd_t * bd) /* Configure the PHY, initialize the link state */ smc911x_phy_configure(dev); - smx911x_handle_mac_address(dev); + smc911x_handle_mac_address(dev); /* Turn on Tx + Rx */ smc911x_enable(dev); diff --git a/lib_generic/zlib.c b/lib_generic/zlib.c index 572196865a5..26e5af1d8e8 100644 --- a/lib_generic/zlib.c +++ b/lib_generic/zlib.c @@ -30,6 +30,8 @@ #include <compiler.h> #include <asm/unaligned.h> #include "u-boot/zlib.h" +#undef OFF /* avoid conflicts */ + /* To avoid a build time warning */ #ifdef STDC #include <malloc.h> diff --git a/net/nfs.c b/net/nfs.c index 27395fbf2e4..4017c3e3539 100644 --- a/net/nfs.c +++ b/net/nfs.c @@ -516,7 +516,7 @@ nfs_readlink_reply (uchar *pkt, unsigned len) strcat (nfs_path, "/"); pathlen = strlen(nfs_path); memcpy (nfs_path+pathlen, (uchar *)&(rpc_pkt.u.reply.data[2]), rlen); - nfs_path[pathlen+rlen+1] = 0; + nfs_path[pathlen + rlen] = 0; } else { memcpy (nfs_path, (uchar *)&(rpc_pkt.u.reply.data[2]), rlen); nfs_path[rlen] = 0; @@ -571,13 +571,14 @@ Interfaces of U-BOOT static void NfsTimeout (void) { - if ( NfsTimeoutCount++ < NFS_RETRY_COUNT ) { + if ( ++NfsTimeoutCount > NFS_RETRY_COUNT ) { + puts ("\nRetry count exceeded; starting again\n"); + NetStartAgain (); + } else { + puts("T "); + NetSetTimeout (NFS_TIMEOUT, NfsTimeout); NfsSend (); - return; } - puts ("Timeout\n"); - NetState = NETLOOP_FAIL; - return; } static void |