summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS9
-rwxr-xr-xMAKEALL1
-rw-r--r--Makefile9
-rw-r--r--arch/arm/cpu/arm926ejs/at91/Makefile1
-rw-r--r--arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c56
-rw-r--r--arch/arm/cpu/arm926ejs/at91/eflash.c271
-rw-r--r--arch/arm/cpu/arm926ejs/at91/reset.c21
-rw-r--r--arch/arm/cpu/arm926ejs/at91/timer.c5
-rw-r--r--arch/arm/cpu/arm926ejs/kirkwood/cpu.c2
-rw-r--r--arch/arm/cpu/arm926ejs/mb86r0x/Makefile47
-rw-r--r--arch/arm/cpu/arm926ejs/mb86r0x/clock.c43
-rw-r--r--arch/arm/cpu/arm926ejs/mb86r0x/reset.c40
-rw-r--r--arch/arm/cpu/arm926ejs/mb86r0x/timer.c142
-rw-r--r--arch/arm/cpu/arm926ejs/orion5x/cpu.c2
-rw-r--r--arch/arm/cpu/armv7/omap-common/Makefile2
-rw-r--r--arch/arm/cpu/armv7/omap-common/reset.S4
-rw-r--r--arch/arm/cpu/armv7/omap-common/syslib.c (renamed from arch/arm/cpu/armv7/omap3/syslib.c)2
-rw-r--r--arch/arm/cpu/armv7/omap3/Makefile1
-rw-r--r--arch/arm/cpu/armv7/omap3/board.c35
-rw-r--r--arch/arm/cpu/armv7/omap3/cache.S101
-rw-r--r--arch/arm/cpu/armv7/omap3/clock.c549
-rw-r--r--arch/arm/cpu/armv7/omap3/lowlevel_init.S69
-rw-r--r--arch/arm/cpu/armv7/omap3/sdrc.c43
-rw-r--r--arch/arm/cpu/armv7/omap3/sys_info.c147
-rw-r--r--arch/arm/cpu/armv7/s5p-common/Makefile46
-rw-r--r--arch/arm/cpu/armv7/s5p-common/cpu_info.c (renamed from arch/arm/cpu/armv7/s5pc1xx/cpu_info.c)11
-rw-r--r--arch/arm/cpu/armv7/s5p-common/timer.c (renamed from arch/arm/cpu/armv7/s5pc1xx/timer.c)23
-rw-r--r--arch/arm/cpu/armv7/s5pc1xx/Makefile2
-rw-r--r--arch/arm/cpu/armv7/s5pc1xx/clock.c51
-rw-r--r--arch/arm/cpu/armv7/s5pc1xx/reset.S2
-rw-r--r--arch/arm/cpu/armv7/s5pc1xx/sromc.c8
-rw-r--r--arch/arm/include/asm/arch-at91/at91_common.h1
-rw-r--r--arch/arm/include/asm/arch-at91/at91_dbu.h41
-rw-r--r--arch/arm/include/asm/arch-at91/at91_eefc.h51
-rw-r--r--arch/arm/include/asm/arch-at91/at91_gpbr.h45
-rw-r--r--arch/arm/include/asm/arch-at91/at91_pit.h2
-rw-r--r--arch/arm/include/asm/arch-at91/at91_rtt.h36
-rw-r--r--arch/arm/include/asm/arch-at91/at91sam9260.h18
-rw-r--r--arch/arm/include/asm/arch-at91/clk.h5
-rw-r--r--arch/arm/include/asm/arch-at91/hardware.h1
-rw-r--r--arch/arm/include/asm/arch-mb86r0x/asm-offsets.h74
-rw-r--r--arch/arm/include/asm/arch-mb86r0x/hardware.h31
-rw-r--r--arch/arm/include/asm/arch-mb86r0x/mb86r0x.h573
-rw-r--r--arch/arm/include/asm/arch-omap3/clocks.h17
-rw-r--r--arch/arm/include/asm/arch-omap3/clocks_omap3.h27
-rw-r--r--arch/arm/include/asm/arch-omap3/cpu.h15
-rw-r--r--arch/arm/include/asm/arch-omap3/omap3.h32
-rw-r--r--arch/arm/include/asm/arch-omap3/sys_proto.h2
-rw-r--r--arch/arm/include/asm/arch-omap4/omap4.h1
-rw-r--r--arch/arm/include/asm/arch-omap4/sys_proto.h3
-rw-r--r--arch/arm/include/asm/arch-orion5x/cpu.h2
-rw-r--r--arch/arm/include/asm/arch-s5pc1xx/clk.h5
-rw-r--r--arch/arm/include/asm/arch-s5pc1xx/cpu.h39
-rw-r--r--arch/arm/include/asm/arch-s5pc1xx/gpio.h172
-rw-r--r--arch/arm/include/asm/arch-s5pc1xx/mmc.h2
-rw-r--r--arch/arm/include/asm/arch-s5pc1xx/pwm.h12
-rw-r--r--arch/avr32/cpu/at32ap700x/Makefile2
-rw-r--r--arch/avr32/cpu/at32ap700x/mmu.c78
-rw-r--r--arch/avr32/cpu/exception.c3
-rw-r--r--arch/avr32/cpu/start.S19
-rw-r--r--arch/avr32/include/asm/arch-at32ap700x/addrspace.h5
-rw-r--r--arch/avr32/include/asm/arch-at32ap700x/mmu.h66
-rw-r--r--arch/avr32/lib/board.c4
-rw-r--r--board/atmel/atngw100/atngw100.c19
-rw-r--r--board/atmel/atstk1000/atstk1000.c19
-rw-r--r--board/earthlcd/favr-32-ezkit/favr-32-ezkit.c19
-rw-r--r--board/esd/meesc/meesc.c116
-rw-r--r--board/eukrea/cpuat91/cpuat91.c53
-rw-r--r--board/mimc/mimc200/mimc200.c24
-rw-r--r--board/miromico/hammerhead/hammerhead.c19
-rw-r--r--board/overo/overo.c105
-rw-r--r--board/overo/overo.h47
-rw-r--r--board/samsung/goni/goni.c8
-rw-r--r--board/samsung/goni/lowlevel_init.S6
-rw-r--r--board/samsung/smdkc100/lowlevel_init.S2
-rw-r--r--board/samsung/smdkc100/onenand.c3
-rw-r--r--board/samsung/smdkc100/smdkc100.c4
-rw-r--r--board/syteco/jadecpu/Makefile55
-rw-r--r--board/syteco/jadecpu/config.mk1
-rw-r--r--board/syteco/jadecpu/jadecpu.c170
-rw-r--r--board/syteco/jadecpu/lowlevel_init.S265
-rw-r--r--board/ti/beagle/beagle.c102
-rw-r--r--board/ti/beagle/beagle.h40
-rw-r--r--board/ti/panda/panda.h44
-rw-r--r--boards.cfg1
-rw-r--r--common/serial.c10
-rw-r--r--doc/README.atmel_mci86
-rw-r--r--drivers/gpio/Makefile2
-rw-r--r--drivers/mmc/Makefile5
-rw-r--r--drivers/mmc/atmel_mci.h48
-rw-r--r--drivers/mmc/gen_atmel_mci.c353
-rw-r--r--drivers/mmc/omap3_mmc.c68
-rw-r--r--drivers/mmc/omap3_mmc.h9
-rw-r--r--drivers/mmc/s5p_mmc.c36
-rw-r--r--drivers/mtd/nand/nand_base.c9
-rw-r--r--drivers/mtd/onenand/samsung.c6
-rw-r--r--drivers/power/twl4030.c69
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/at91sam9_rtt.c100
-rw-r--r--drivers/serial/Makefile2
-rw-r--r--drivers/serial/serial_s5p.c10
-rw-r--r--drivers/spi/atmel_spi.c13
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/mb86r0xgdc.c186
-rw-r--r--include/configs/atngw100.h3
-rw-r--r--include/configs/atstk1002.h3
-rw-r--r--include/configs/atstk1003.h3
-rw-r--r--include/configs/atstk1004.h3
-rw-r--r--include/configs/atstk1006.h3
-rw-r--r--include/configs/cpuat91.h53
-rw-r--r--include/configs/favr-32-ezkit.h3
-rw-r--r--include/configs/hammerhead.h3
-rw-r--r--include/configs/jadecpu.h291
-rw-r--r--include/configs/meesc.h26
-rw-r--r--include/configs/mimc200.h3
-rw-r--r--include/configs/omap3_beagle.h4
-rw-r--r--include/configs/omap3_overo.h4
-rw-r--r--include/configs/otc570.h1
-rw-r--r--include/configs/s5p_goni.h2
-rw-r--r--include/configs/smdkc100.h2
-rw-r--r--include/mmc.h15
-rw-r--r--include/serial.h8
-rw-r--r--include/twl4030.h14
-rw-r--r--tools/Makefile3
-rw-r--r--tools/logos/syteco.bmpbin0 -> 11414 bytes
125 files changed, 4866 insertions, 846 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 4b91b0f8041..0c6ce2bfd4f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -152,10 +152,6 @@ Dave Ellis <DGE@sixnetio.com>
SXNI855T MPC8xx
-Fred Fan <fanyefeng@gmail.com>
-
- mx51evk i.MX51
-
Thomas Frieden <ThomasF@hyperion-entertainment.com>
AmigaOneG3SE MPC7xx
@@ -549,6 +545,7 @@ Stefano Babic <sbabic@denx.de>
polaris xscale
trizepsiv xscale
+ mx51evk i.MX51
Dirk Behme <dirk.behme@gmail.com>
@@ -806,6 +803,10 @@ Prafulla Wadaskar <prafulla@marvell.com>
rd6281a ARM926EJS (Kirkwood SoC)
sheevaplug ARM926EJS (Kirkwood SoC)
+Matthias Weisser <weisserm@arcor.de>
+
+ jadecpu ARM926EJS (MB86R01 SoC)
+
Richard Woodruff <r-woodruff2@ti.com>
omap2420h4 ARM1136EJS
diff --git a/MAKEALL b/MAKEALL
index b34ae332884..21b4cbd7d7c 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -579,6 +579,7 @@ LIST_ARM9=" \
edminiv2 \
guruplug \
imx27lite \
+ jadecpu \
lpd7a400 \
magnesium \
mv88f6281gtw_ge \
diff --git a/Makefile b/Makefile
index 4f1cb1b4d1a..44cd35754dc 100644
--- a/Makefile
+++ b/Makefile
@@ -253,6 +253,13 @@ ifeq ($(SOC),omap4)
LIBS += $(CPUDIR)/omap-common/libomap-common.a
endif
+ifeq ($(SOC),s5pc1xx)
+LIBS += $(CPUDIR)/s5p-common/libs5p-common.a
+endif
+ifeq ($(SOC),s5pc2xx)
+LIBS += $(CPUDIR)/s5p-common/libs5p-common.a
+endif
+
LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
@@ -1883,7 +1890,7 @@ CPUAT91_RAM_config \
CPUAT91_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
+ @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91
#########################################################################
## ARM926EJ-S Systems
diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile
index 4f467be91c2..def3980b634 100644
--- a/arch/arm/cpu/arm926ejs/at91/Makefile
+++ b/arch/arm/cpu/arm926ejs/at91/Makefile
@@ -34,6 +34,7 @@ COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o
COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o
COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o
COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o
+COBJS-$(CONFIG_AT91_EFLASH) += eflash.o
COBJS-$(CONFIG_AT91_LED) += led.o
COBJS-y += clock.o
COBJS-y += cpu.o
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
index 77d49ab1c76..87b04426b9b 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
@@ -28,12 +28,27 @@
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
+
void at91_serial0_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */
- at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* RXD0 */
+ at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */
writel(1 << AT91SAM9260_ID_US0, &pmc->pcer);
}
@@ -42,7 +57,7 @@ void at91_serial1_hw_init(void)
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */
- at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* RXD1 */
+ at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */
writel(1 << AT91SAM9260_ID_US1, &pmc->pcer);
}
@@ -51,7 +66,7 @@ void at91_serial2_hw_init(void)
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */
- at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* RXD2 */
+ at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */
writel(1 << AT91SAM9260_ID_US2, &pmc->pcer);
}
@@ -59,7 +74,7 @@ void at91_serial3_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
- at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* DRXD */
+ at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */
writel(1 << AT91_ID_SYS, &pmc->pcer);
}
@@ -88,9 +103,9 @@ void at91_spi0_hw_init(unsigned long cs_mask)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
- at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
/* Enable clock */
writel(1 << AT91SAM9260_ID_SPI0, &pmc->pcer);
@@ -125,9 +140,9 @@ void at91_spi1_hw_init(unsigned long cs_mask)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
- at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* SPI1_MISO */
- at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* SPI1_MOSI */
- at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* SPI1_SPCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */
+ at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */
/* Enable clock */
writel(1 << AT91SAM9260_ID_SPI1, &pmc->pcer);
@@ -194,3 +209,24 @@ void at91_macb_hw_init(void)
#endif
}
#endif
+
+#if defined(CONFIG_ATMEL_MCI) || defined(CONFIG_GENERIC_ATMEL_MCI)
+void at91_mci_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */
+#if defined(CONFIG_ATMEL_MCI_PORTB)
+ at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */
+ at91_set_b_periph(AT91_PIO_PORTA, 0, 1); /* MCDB0 */
+ at91_set_b_periph(AT91_PIO_PORTA, 5, 1); /* MCDB1 */
+ at91_set_b_periph(AT91_PIO_PORTA, 4, 1); /* MCDB2 */
+ at91_set_b_periph(AT91_PIO_PORTA, 3, 1); /* MCDB3 */
+#else
+ at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* MCCDA */
+ at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* MCDA0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 9, 1); /* MCDA1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* MCDA2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* MCDA3 */
+#endif
+}
+#endif
+
diff --git a/arch/arm/cpu/arm926ejs/at91/eflash.c b/arch/arm/cpu/arm926ejs/at91/eflash.c
new file mode 100644
index 00000000000..2e851dbd2c8
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/at91/eflash.c
@@ -0,0 +1,271 @@
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * this driver supports the enhanced embedded flash in the Atmel
+ * AT91SAM9XE devices with the following geometry:
+ *
+ * AT91SAM9XE128: 1 plane of 8 regions of 32 pages (total 256 pages)
+ * AT91SAM9XE256: 1 plane of 16 regions of 32 pages (total 512 pages)
+ * AT91SAM9XE512: 1 plane of 32 regions of 32 pages (total 1024 pages)
+ * (the exact geometry is read from the flash at runtime, so any
+ * future devices should already be covered)
+ *
+ * Regions can be write/erase protected.
+ * Whole (!) pages can be individually written with erase on the fly.
+ * Writing partial pages will corrupt the rest of the page.
+ *
+ * The flash is presented to u-boot with each region being a sector,
+ * having the following effects:
+ * Each sector can be hardware protected (protect on/off).
+ * Each page in a sector can be rewritten anytime.
+ * Since pages are erased when written, the "erase" does nothing.
+ * The first "CONFIG_EFLASH_PROTSECTORS" cannot be unprotected
+ * by u-Boot commands.
+ *
+ * Note: Redundant environment will not work in this flash since
+ * it does use partial page writes. Make sure the environent spans
+ * whole pages!
+ */
+
+/*
+ * optional TODOs (nice to have features):
+ *
+ * make the driver coexist with other NOR flash drivers
+ * (use an index into flash_info[], requires work
+ * in those other drivers, too)
+ * Make the erase command fill the sectors with 0xff
+ * (if the flashes grow larger in the future and
+ * someone puts a jffs2 into them)
+ * do a read-modify-write for partially programmed pages
+ */
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_eefc.h>
+#include <asm/arch/at91_dbu.h>
+
+/* checks to detect configuration errors */
+#if CONFIG_SYS_MAX_FLASH_BANKS!=1
+#error eflash: this driver can only handle 1 bank
+#endif
+
+/* global structure */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+static u32 pagesize;
+
+unsigned long flash_init (void)
+{
+ at91_eefc_t *eefc = (at91_eefc_t *) 0xfffffa00;
+ at91_dbu_t *dbu = (at91_dbu_t *) 0xfffff200;
+ u32 id, size, nplanes, planesize, nlocks;
+ u32 addr, i, tmp=0;
+
+ debug("eflash: init\n");
+
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+
+ /* check if its an AT91ARM9XE SoC */
+ if ((readl(&dbu->cidr) & AT91_DBU_CID_ARCH_MASK) != AT91_DBU_CID_ARCH_9XExx) {
+ puts("eflash: not an AT91SAM9XE\n");
+ return 0;
+ }
+
+ /* now query the eflash for its structure */
+ writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GETD, &eefc->fcr);
+ while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0)
+ ;
+ id = readl(&eefc->frr); /* word 0 */
+ size = readl(&eefc->frr); /* word 1 */
+ pagesize = readl(&eefc->frr); /* word 2 */
+ nplanes = readl(&eefc->frr); /* word 3 */
+ planesize = readl(&eefc->frr); /* word 4 */
+ debug("id=%08x size=%u pagesize=%u planes=%u planesize=%u\n",
+ id, size, pagesize, nplanes, planesize);
+ for (i=1; i<nplanes; i++) {
+ tmp = readl(&eefc->frr); /* words 5..4+nplanes-1 */
+ };
+ nlocks = readl(&eefc->frr); /* word 4+nplanes */
+ debug("nlocks=%u\n", nlocks);
+ /* since we are going to use the lock regions as sectors, check count */
+ if (nlocks > CONFIG_SYS_MAX_FLASH_SECT) {
+ printf("eflash: number of lock regions(%u) "\
+ "> CONFIG_SYS_MAX_FLASH_SECT. reducing...\n",
+ nlocks);
+ nlocks = CONFIG_SYS_MAX_FLASH_SECT;
+ }
+ flash_info[0].size = size;
+ flash_info[0].sector_count = nlocks;
+ flash_info[0].flash_id = id;
+
+ addr = AT91SAM9XE_FLASH_BASE;
+ for (i=0; i<nlocks; i++) {
+ tmp = readl(&eefc->frr); /* words 4+nplanes+1.. */
+ flash_info[0].start[i] = addr;
+ flash_info[0].protect[i] = 0;
+ addr += tmp;
+ };
+
+ /* now read the protection information for all regions */
+ writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr);
+ while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0)
+ ;
+ for (i=0; i<flash_info[0].sector_count; i++) {
+ if (i%32 == 0)
+ tmp = readl(&eefc->frr);
+ flash_info[0].protect[i] = (tmp >> (i%32)) & 1;
+#if defined(CONFIG_EFLASH_PROTSECTORS)
+ if (i < CONFIG_EFLASH_PROTSECTORS)
+ flash_info[0].protect[i] = 1;
+#endif
+ }
+
+ return size;
+}
+
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ puts("AT91SAM9XE embedded flash\n Size: ");
+ print_size(info->size, " in ");
+ printf("%d Sectors\n", info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf(" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+int flash_real_protect (flash_info_t *info, long sector, int prot)
+{
+ at91_eefc_t *eefc = (at91_eefc_t *) 0xfffffa00;
+ u32 pagenum = (info->start[sector]-AT91SAM9XE_FLASH_BASE)/pagesize;
+ u32 i, tmp=0;
+
+ debug("protect sector=%ld prot=%d\n", sector, prot);
+
+#if defined(CONFIG_EFLASH_PROTSECTORS)
+ if (sector < CONFIG_EFLASH_PROTSECTORS) {
+ if (!prot) {
+ printf("eflash: sector %lu cannot be unprotected\n",
+ sector);
+ }
+ return 1; /* return anyway, caller does not care for result */
+ }
+#endif
+ if (prot) {
+ writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_SLB |
+ (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr);
+ } else {
+ writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_CLB |
+ (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr);
+ }
+ while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0)
+ ;
+ /* now re-read the protection information for all regions */
+ writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr);
+ while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0)
+ ;
+ for (i=0; i<info->sector_count; i++) {
+ if (i%32 == 0)
+ tmp = readl(&eefc->frr);
+ info->protect[i] = (tmp >> (i%32)) & 1;
+ }
+ return 0;
+}
+
+static u32 erase_write_page (u32 pagenum)
+{
+ at91_eefc_t *eefc = (at91_eefc_t *) 0xfffffa00;
+
+ debug("erase+write page=%u\n", pagenum);
+
+ /* give erase and write page command */
+ writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_EWP |
+ (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr);
+ while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0)
+ ;
+ /* return status */
+ return readl(&eefc->fsr)
+ & (AT91_EEFC_FSR_FCMDE | AT91_EEFC_FSR_FLOCKE);
+}
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ debug("erase first=%d last=%d\n", s_first, s_last);
+ puts("this flash does not need and support erasing!\n");
+ return 0;
+}
+
+/*
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ u32 pagenum;
+ u32 *src32, *dst32;
+ u32 i;
+
+ debug("write src=%08lx addr=%08lx cnt=%lx\n",
+ (ulong)src, addr, cnt);
+
+ /* REQUIRE addr to be on a page start, abort if not */
+ if (addr % pagesize) {
+ printf ("eflash: start %08lx is not on page start\n"\
+ " write aborted\n", addr);
+ return 1;
+ }
+
+ /* now start copying data */
+ pagenum = (addr-AT91SAM9XE_FLASH_BASE)/pagesize;
+ src32 = (u32 *) src;
+ dst32 = (u32 *) addr;
+ while (cnt > 0) {
+ i = pagesize / 4;
+ /* fill page buffer */
+ while (i--)
+ *dst32++ = *src32++;
+ /* write page */
+ if (erase_write_page(pagenum))
+ return 1;
+ pagenum++;
+ if (cnt > pagesize)
+ cnt -= pagesize;
+ else
+ cnt = 0;
+ }
+ return 0;
+}
+
diff --git a/arch/arm/cpu/arm926ejs/at91/reset.c b/arch/arm/cpu/arm926ejs/at91/reset.c
index 1b67e77887f..d2569d8baea 100644
--- a/arch/arm/cpu/arm926ejs/at91/reset.c
+++ b/arch/arm/cpu/arm926ejs/at91/reset.c
@@ -27,18 +27,19 @@
#include <asm/arch/at91_rstc.h>
#include <asm/arch/io.h>
-/*
- * Reset the cpu by setting up the watchdog timer and let him time out.
- */
+/* Reset the cpu by telling the reset controller to do so */
void reset_cpu(ulong ignored)
{
at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE;
- /* this is the way Linux does it */
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_PROCRST | AT91_RSTC_CR_PERRST,
- &rstc->cr);
-
- while (1);
- /* Never reached */
+ writel(AT91_RSTC_KEY
+ | AT91_RSTC_CR_PROCRST /* Processor Reset */
+ | AT91_RSTC_CR_PERRST /* Peripheral Reset */
+#ifdef CONFIG_AT91RESET_EXTRST
+ | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */
+#endif
+ , &rstc->cr);
+ /* never reached */
+ while (1)
+ ;
}
diff --git a/arch/arm/cpu/arm926ejs/at91/timer.c b/arch/arm/cpu/arm926ejs/at91/timer.c
index d21eebfb4eb..8efc34bcf12 100644
--- a/arch/arm/cpu/arm926ejs/at91/timer.c
+++ b/arch/arm/cpu/arm926ejs/at91/timer.c
@@ -138,8 +138,5 @@ ulong get_timer(ulong base)
*/
ulong get_tbclk(void)
{
- ulong tbclk;
-
- tbclk = CONFIG_SYS_HZ;
- return tbclk;
+ return timer_freq;
}
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
index c63e8641f21..82c978bd93e 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
@@ -81,7 +81,7 @@ unsigned int kw_winctrl_calcsize(unsigned int sizeval)
unsigned int j = 0;
u32 val = sizeval >> 1;
- for (i = 0; val > 0x10000; i++) {
+ for (i = 0; val >= 0x10000; i++) {
j |= (1 << i);
val = val >> 1;
}
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/Makefile b/arch/arm/cpu/arm926ejs/mb86r0x/Makefile
new file mode 100644
index 00000000000..ce3e5a5a5ac
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mb86r0x/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).a
+
+COBJS = clock.o reset.o timer.o
+SOBJS =
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/clock.c b/arch/arm/cpu/arm926ejs/mb86r0x/clock.c
new file mode 100644
index 00000000000..70c8c8b04a2
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mb86r0x/clock.c
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2010
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+/*
+ * Get the peripheral bus frequency depending on pll pin settings
+ */
+ulong get_bus_freq(ulong dummy)
+{
+ struct mb86r0x_crg * crg = (struct mb86r0x_crg *)
+ MB86R0x_CRG_BASE;
+ uint32_t pllmode;
+
+ pllmode = readl(&crg->crpr) & MB86R0x_CRG_CRPR_PLLMODE;
+
+ if (pllmode == MB86R0x_CRG_CRPR_PLLMODE_X20)
+ return 40000000;
+
+ return 41164767;
+}
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/reset.c b/arch/arm/cpu/arm926ejs/mb86r0x/reset.c
new file mode 100644
index 00000000000..e7f0f6788bb
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mb86r0x/reset.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2010
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+/*
+ * Reset the cpu by setting software reset request bit
+ */
+void reset_cpu(ulong ignored)
+{
+ struct mb86r0x_crg * crg = (struct mb86r0x_crg *)
+ MB86R0x_CRG_BASE;
+
+ writel(MB86R0x_CRSR_SWRSTREQ, &crg->crsr);
+ while (1)
+ /* NOP */;
+ /* Never reached */
+}
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/timer.c b/arch/arm/cpu/arm926ejs/mb86r0x/timer.c
new file mode 100644
index 00000000000..9175b71d16a
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mb86r0x/timer.c
@@ -0,0 +1,142 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2010
+ * Matthias Weisser, Graf-Syteco <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <div64.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+#define TIMER_LOAD_VAL 0xffffffff
+#define TIMER_FREQ (CONFIG_MB86R0x_IOCLK / 256)
+
+static unsigned long long timestamp;
+static ulong lastdec;
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, TIMER_FREQ);
+
+ return tick;
+}
+
+static inline unsigned long long usec_to_tick(unsigned long long usec)
+{
+ usec *= TIMER_FREQ;
+ do_div(usec, 1000000);
+
+ return usec;
+}
+
+/* nothing really to do with interrupts, just starts up a counter. */
+int timer_init(void)
+{
+ struct mb86r0x_timer * timer = (struct mb86r0x_timer *)
+ MB86R0x_TIMER_BASE;
+ ulong ctrl = readl(&timer->control);
+
+ writel(TIMER_LOAD_VAL, &timer->load);
+
+ ctrl |= MB86R0x_TIMER_ENABLE | MB86R0x_TIMER_PRS_8S |
+ MB86R0x_TIMER_SIZE_32;
+
+ writel(ctrl, &timer->control);
+
+ reset_timer_masked();
+
+ return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+unsigned long long get_ticks(void)
+{
+ struct mb86r0x_timer * timer = (struct mb86r0x_timer *)
+ MB86R0x_TIMER_BASE;
+ ulong now = readl(&timer->value);
+
+ if (now <= lastdec) {
+ /* normal mode (non roll) */
+ /* move stamp forward with absolut diff ticks */
+ timestamp += lastdec - now;
+ } else {
+ /* we have rollover of incrementer */
+ timestamp += lastdec + TIMER_LOAD_VAL - now;
+ }
+ lastdec = now;
+ return timestamp;
+}
+
+void reset_timer_masked(void)
+{
+ struct mb86r0x_timer * timer = (struct mb86r0x_timer *)
+ MB86R0x_TIMER_BASE;
+
+ /* capture current value time */
+ lastdec = readl(&timer->value);
+ timestamp = 0; /* start "advancing" time stamp from 0 */
+}
+
+ulong get_timer_masked(void)
+{
+ return tick_to_time(get_ticks());
+}
+
+void __udelay(unsigned long usec)
+{
+ unsigned long long tmp;
+ ulong tmo;
+
+ tmo = usec_to_tick(usec);
+ tmp = get_ticks(); /* get current timestamp */
+
+ while ((get_ticks() - tmp) < tmo) /* loop till event */
+ /*NOP*/;
+}
+
+void reset_timer(void)
+{
+ reset_timer_masked();
+}
+
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ ulong tbclk;
+
+ tbclk = TIMER_FREQ;
+ return tbclk;
+}
diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/cpu/arm926ejs/orion5x/cpu.c
index 3740e33e9d8..260f88b46e0 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c
+++ b/arch/arm/cpu/arm926ejs/orion5x/cpu.c
@@ -61,7 +61,7 @@ unsigned int orion5x_winctrl_calcsize(unsigned int sizeval)
unsigned int j = 0;
u32 val = sizeval >> 1;
- for (i = 0; val > 0x10000; i++) {
+ for (i = 0; val >= 0x10000; i++) {
j |= (1 << i);
val = val >> 1;
}
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 3a4a304e45b..caee7263b15 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -26,7 +26,9 @@ include $(TOPDIR)/config.mk
LIB = $(obj)libomap-common.a
SOBJS := reset.o
+
COBJS := timer.o
+COBJS += syslib.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/arm/cpu/armv7/omap-common/reset.S b/arch/arm/cpu/armv7/omap-common/reset.S
index a53c4081958..838b1221ee2 100644
--- a/arch/arm/cpu/armv7/omap-common/reset.S
+++ b/arch/arm/cpu/armv7/omap-common/reset.S
@@ -27,10 +27,12 @@
reset_cpu:
ldr r1, rstctl @ get addr for global reset
@ reg
- mov r3, #0x2 @ full reset pll + mpu
+ ldr r3, rstbit @ sw reset bit
str r3, [r1] @ force reset
mov r0, r0
_loop_forever:
b _loop_forever
rstctl:
.word PRM_RSTCTRL
+rstbit:
+ .word PRM_RSTCTRL_RESET
diff --git a/arch/arm/cpu/armv7/omap3/syslib.c b/arch/arm/cpu/armv7/omap-common/syslib.c
index 9ced495c8d0..f9ed9a307b7 100644
--- a/arch/arm/cpu/armv7/omap3/syslib.c
+++ b/arch/arm/cpu/armv7/omap-common/syslib.c
@@ -23,8 +23,6 @@
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
#include <asm/arch/sys_proto.h>
/************************************************************
diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile
index 79ae26706e7..95526d6893d 100644
--- a/arch/arm/cpu/armv7/omap3/Makefile
+++ b/arch/arm/cpu/armv7/omap3/Makefile
@@ -32,7 +32,6 @@ COBJS += board.o
COBJS += clock.o
COBJS += gpio.o
COBJS += mem.o
-COBJS += syslib.o
COBJS += sys_info.o
COBJS-$(CONFIG_EMIF4) += emif4.o
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 69e56f55c5b..6c2a132b63b 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -120,41 +120,6 @@ void secureworld_exit()
}
/******************************************************************************
- * Routine: setup_auxcr()
- * Description: Write to AuxCR desired value using SMI.
- * general use.
- *****************************************************************************/
-void setup_auxcr()
-{
- unsigned long i;
- volatile unsigned int j;
- /* Save r0, r12 and restore them after usage */
- __asm__ __volatile__("mov %0, r12":"=r"(j));
- __asm__ __volatile__("mov %0, r0":"=r"(i));
-
- /*
- * GP Device ROM code API usage here
- * r12 = AUXCR Write function and r0 value
- */
- __asm__ __volatile__("mov r12, #0x3");
- __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
- /* Enabling ASA */
- __asm__ __volatile__("orr r0, r0, #0x10");
- /* Enable L1NEON */
- __asm__ __volatile__("orr r0, r0, #1 << 5");
- /* SMI instruction to call ROM Code API */
- __asm__ __volatile__(".word 0xE1600070");
- /* Set PLD_FWD bit in L2AUXCR (Cortex-A8 erratum 725233 workaround) */
- __asm__ __volatile__("mov r12, #0x2");
- __asm__ __volatile__("mrc p15, 1, r0, c9, c0, 2");
- __asm__ __volatile__("orr r0, r0, #1 << 27");
- /* SMI instruction to call ROM Code API */
- __asm__ __volatile__(".word 0xE1600070");
- __asm__ __volatile__("mov r0, %0":"=r"(i));
- __asm__ __volatile__("mov r12, %0":"=r"(j));
-}
-
-/******************************************************************************
* Routine: try_unlock_sram()
* Description: If chip is GP/EMU(special) type, unlock the SRAM for
* general use.
diff --git a/arch/arm/cpu/armv7/omap3/cache.S b/arch/arm/cpu/armv7/omap3/cache.S
index 4b65ac58a57..24e950f38cd 100644
--- a/arch/arm/cpu/armv7/omap3/cache.S
+++ b/arch/arm/cpu/armv7/omap3/cache.S
@@ -43,6 +43,7 @@
.global invalidate_dcache
.global l2_cache_enable
.global l2_cache_disable
+.global setup_auxcr
/*
* invalidate_dcache()
@@ -128,64 +129,56 @@ finished_inval:
ldmfd r13!, {r0 - r5, r7, r9 - r12, pc}
-
-l2_cache_enable:
- stmfd r13!, {r0, r1, r2, lr}
- @ ES2 onwards we can disable/enable L2 ourselves
+l2_cache_set:
+ stmfd r13!, {r4 - r6, lr}
+ mov r5, r0
bl get_cpu_rev
- cmp r0, #CPU_3XX_ES20
- blt l2_cache_disable_EARLIER_THAN_ES2
- mrc 15, 0, r3, cr1, cr0, 1
- orr r3, r3, #2
- mcr 15, 0, r3, cr1, cr0, 1
- b l2_cache_enable_END
-l2_cache_enable_EARLIER_THAN_ES2:
- @ Save r0, r12 and restore them after usage
- mov r3, ip
- str r3, [sp, #4]
- mov r3, r0
- @
+ mov r4, r0
+ bl get_cpu_family
+ @ ES2 onwards we can disable/enable L2 ourselves
+ cmp r0, #CPU_OMAP34XX
+ cmpeq r4, #CPU_3XX_ES10
+ mrc 15, 0, r0, cr1, cr0, 1
+ bic r0, r0, #2
+ orr r0, r0, r5, lsl #1
+ mcreq 15, 0, r0, cr1, cr0, 1
@ GP Device ROM code API usage here
@ r12 = AUXCR Write function and r0 value
- @
mov ip, #3
- mrc 15, 0, r0, cr1, cr0, 1
- orr r0, r0, #2
- @ SMI instruction to call ROM Code API
- .word 0xe1600070
- mov r0, r3
- mov ip, r3
- str r3, [sp, #4]
-l2_cache_enable_END:
- ldmfd r13!, {r1, r2, r3, pc}
+ @ SMCNE instruction to call ROM Code API
+ .word 0x11600070
+ ldmfd r13!, {r4 - r6, pc}
+l2_cache_enable:
+ mov r0, #1
+ b l2_cache_set
l2_cache_disable:
- stmfd r13!, {r0, r1, r2, lr}
- @ ES2 onwards we can disable/enable L2 ourselves
- bl get_cpu_rev
- cmp r0, #CPU_3XX_ES20
- blt l2_cache_disable_EARLIER_THAN_ES2
- mrc 15, 0, r3, cr1, cr0, 1
- bic r3, r3, #2
- mcr 15, 0, r3, cr1, cr0, 1
- b l2_cache_disable_END
-l2_cache_disable_EARLIER_THAN_ES2:
- @ Save r0, r12 and restore them after usage
- mov r3, ip
- str r3, [sp, #4]
- mov r3, r0
- @
- @ GP Device ROM code API usage here
- @ r12 = AUXCR Write function and r0 value
- @
- mov ip, #3
- mrc 15, 0, r0, cr1, cr0, 1
- bic r0, r0, #2
- @ SMI instruction to call ROM Code API
- .word 0xe1600070
- mov r0, r3
- mov ip, r3
- str r3, [sp, #4]
-l2_cache_disable_END:
- ldmfd r13!, {r1, r2, r3, pc}
+ mov r0, #0
+ b l2_cache_set
+
+/******************************************************************************
+ * Routine: setup_auxcr()
+ * Description: Write to AuxCR desired value using SMI.
+ * general use.
+ *****************************************************************************/
+setup_auxcr:
+ mrc p15, 0, r0, c0, c0, 0 @ read main ID register
+ and r2, r0, #0x00f00000 @ variant
+ and r3, r0, #0x0000000f @ revision
+ orr r1, r3, r2, lsr #20-4 @ combine variant and revision
+ mov r12, #0x3
+ mrc p15, 0, r0, c1, c0, 1
+ orr r0, r0, #0x10 @ Enable ASA
+ @ Enable L1NEON on pre-r2p1 (erratum 621766 workaround)
+ cmp r1, #0x21
+ orrlt r0, r0, #1 << 5
+ .word 0xE1600070 @ SMC
+ mov r12, #0x2
+ mrc p15, 1, r0, c9, c0, 2
+ @ Set PLD_FWD bit in L2AUXCR on pre-r2p1 (erratum 725233 workaround)
+ cmp r1, #0x21
+ orrlt r0, r0, #1 << 27
+ .word 0xE1600070 @ SMC
+ bx lr
+
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 6330c9e5da4..2238c52e3be 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -50,12 +50,7 @@ u32 get_osc_clk_speed(void)
if (val & SYSCLKDIV_2)
cdiv = 2;
- else if (val & SYSCLKDIV_1)
- cdiv = 1;
else
- /*
- * Should never reach here! (Assume divider as 1)
- */
cdiv = 1;
/* enable timer2 */
@@ -89,11 +84,7 @@ u32 get_osc_clk_speed(void)
while (readl(&s32k_base->s32k_cr) < (start + 20)) ;
cend = readl(&gpt1_base->tcrr); /* get end sys_clk count */
cdiff = cend - cstart; /* get elapsed ticks */
-
- if (cdiv == 2)
- {
- cdiff *= 2;
- }
+ cdiff *= cdiv;
/* based on number of ticks assign speed */
if (cdiff > 19000)
@@ -135,65 +126,22 @@ void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
}
}
-/******************************************************************************
- * prcm_init() - inits clocks for PRCM as defined in clocks.h
- * called from SRAM, or Flash (using temp SRAM stack).
- *****************************************************************************/
-void prcm_init(void)
+/*
+ * OMAP34XX/35XX specific functions
+ */
+
+static void dpll3_init_34xx(u32 sil_index, u32 clk_index)
{
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ dpll_param *ptr = (dpll_param *) get_core_dpll_param();
void (*f_lock_pll) (u32, u32, u32, u32);
int xip_safe, p0, p1, p2, p3;
- u32 osc_clk = 0, sys_clkin_sel;
- u32 clk_index, sil_index = 0;
- struct prm *prm_base = (struct prm *)PRM_BASE;
- struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
- dpll_param *dpll_param_p;
-
- f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start +
- SRAM_VECT_CODE);
xip_safe = is_running_in_sram();
- /*
- * Gauge the input clock speed and find out the sys_clkin_sel
- * value corresponding to the input clock.
- */
- osc_clk = get_osc_clk_speed();
- get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
-
- /* set input crystal speed */
- sr32(&prm_base->clksel, 0, 3, sys_clkin_sel);
+ /* Moving to the right sysclk and ES rev base */
+ ptr = ptr + (3 * clk_index) + sil_index;
- /* If the input clock is greater than 19.2M always divide/2 */
- if (sys_clkin_sel > 2) {
- /* input clock divider */
- sr32(&prm_base->clksrc_ctrl, 6, 2, 2);
- clk_index = sys_clkin_sel / 2;
- } else {
- /* input clock divider */
- sr32(&prm_base->clksrc_ctrl, 6, 2, 1);
- clk_index = sys_clkin_sel;
- }
-
- /*
- * The DPLL tables are defined according to sysclk value and
- * silicon revision. The clk_index value will be used to get
- * the values for that input sysclk from the DPLL param table
- * and sil_index will get the values for that SysClk for the
- * appropriate silicon rev.
- */
- if (get_cpu_rev())
- sil_index = 1;
-
- /* Unlock MPU DPLL (slows things down, and needed later) */
- sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS);
- wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, LDELAY);
-
- /* Getting the base address of Core DPLL param table */
- dpll_param_p = (dpll_param *) get_core_dpll_param();
-
- /* Moving it to the right sysclk and ES rev base */
- dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
if (xip_safe) {
/*
* CORE DPLL
@@ -208,34 +156,38 @@ void prcm_init(void)
* work. write another value and then default value.
*/
- /* m3x2 */
- sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2 + 1);
- /* m3x2 */
+ /* CM_CLKSEL1_EMU[DIV_DPLL3] */
+ sr32(&prcm_base->clksel1_emu, 16, 5, (CORE_M3X2 + 1)) ;
sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2);
- /* Set M2 */
- sr32(&prcm_base->clksel1_pll, 27, 2, dpll_param_p->m2);
- /* Set M */
- sr32(&prcm_base->clksel1_pll, 16, 11, dpll_param_p->m);
- /* Set N */
- sr32(&prcm_base->clksel1_pll, 8, 7, dpll_param_p->n);
- /* 96M Src */
+
+ /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
+ sr32(&prcm_base->clksel1_pll, 27, 5, ptr->m2);
+
+ /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
+ sr32(&prcm_base->clksel1_pll, 16, 11, ptr->m);
+
+ /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
+ sr32(&prcm_base->clksel1_pll, 8, 7, ptr->n);
+
+ /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
sr32(&prcm_base->clksel1_pll, 6, 1, 0);
- /* ssi */
+
+ /* SSI */
sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV);
- /* fsusb */
+ /* FSUSB */
sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV);
- /* l4 */
+ /* L4 */
sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV);
- /* l3 */
+ /* L3 */
sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV);
- /* gfx */
- sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV);
- /* reset mgr */
+ /* GFX */
+ sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV);
+ /* RESET MGR */
sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM);
- /* FREQSEL */
- sr32(&prcm_base->clken_pll, 4, 4, dpll_param_p->fsel);
- /* lock mode */
- sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK);
+ /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
+ sr32(&prcm_base->clken_pll, 4, 4, ptr->fsel);
+ /* LOCK MODE */
+ sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK);
wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen,
LDELAY);
@@ -244,102 +196,405 @@ void prcm_init(void)
* if running from flash, jump to small relocated code
* area in SRAM.
*/
+ f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start +
+ SRAM_VECT_CODE);
+
p0 = readl(&prcm_base->clken_pll);
sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS);
- sr32(&p0, 4, 4, dpll_param_p->fsel); /* FREQSEL */
+ /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
+ sr32(&p0, 4, 4, ptr->fsel);
p1 = readl(&prcm_base->clksel1_pll);
- sr32(&p1, 27, 2, dpll_param_p->m2); /* Set M2 */
- sr32(&p1, 16, 11, dpll_param_p->m); /* Set M */
- sr32(&p1, 8, 7, dpll_param_p->n); /* Set N */
- sr32(&p1, 6, 1, 0); /* set source for 96M */
+ /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
+ sr32(&p1, 27, 5, ptr->m2);
+ /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
+ sr32(&p1, 16, 11, ptr->m);
+ /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
+ sr32(&p1, 8, 7, ptr->n);
+ /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
+ sr32(&p1, 6, 1, 0);
p2 = readl(&prcm_base->clksel_core);
- sr32(&p2, 8, 4, CORE_SSI_DIV); /* ssi */
- sr32(&p2, 4, 2, CORE_FUSB_DIV); /* fsusb */
- sr32(&p2, 2, 2, CORE_L4_DIV); /* l4 */
- sr32(&p2, 0, 2, CORE_L3_DIV); /* l3 */
+ /* SSI */
+ sr32(&p2, 8, 4, CORE_SSI_DIV);
+ /* FSUSB */
+ sr32(&p2, 4, 2, CORE_FUSB_DIV);
+ /* L4 */
+ sr32(&p2, 2, 2, CORE_L4_DIV);
+ /* L3 */
+ sr32(&p2, 0, 2, CORE_L3_DIV);
p3 = (u32)&prcm_base->idlest_ckgen;
(*f_lock_pll) (p0, p1, p2, p3);
}
+}
- /* PER DPLL */
- sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP);
- wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
-
- /* Getting the base address to PER DPLL param table */
-
- /* Set N */
- dpll_param_p = (dpll_param *) get_per_dpll_param();
+static void dpll4_init_34xx(u32 sil_index, u32 clk_index)
+{
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ dpll_param *ptr = (dpll_param *) get_per_dpll_param();
/* Moving it to the right sysclk base */
- dpll_param_p = dpll_param_p + clk_index;
+ ptr = ptr + clk_index;
+
+ /* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */
+ sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP);
+ wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
/*
* Errata 1.50 Workaround for OMAP3 ES1.0 only
* If using default divisors, write default divisor + 1
* and then the actual divisor value
*/
- sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2 + 1); /* set M6 */
- sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2); /* set M6 */
- sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2 + 1); /* set M5 */
- sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2); /* set M5 */
- sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2 + 1); /* set M4 */
- sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2); /* set M4 */
- sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2 + 1); /* set M3 */
- sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2); /* set M3 */
- sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2 + 1); /* set M2 */
- sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2); /* set M2 */
+ /* M6 */
+ sr32(&prcm_base->clksel1_emu, 24, 5, (PER_M6X2 + 1));
+ sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2);
+ /* M5 */
+ sr32(&prcm_base->clksel_cam, 0, 5, (PER_M5X2 + 1));
+ sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2);
+ /* M4 */
+ sr32(&prcm_base->clksel_dss, 0, 5, (PER_M4X2 + 1));
+ sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2);
+ /* M3 */
+ sr32(&prcm_base->clksel_dss, 8, 5, (PER_M3X2 + 1));
+ sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2);
+ /* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */
+ sr32(&prcm_base->clksel3_pll, 0, 5, (ptr->m2 + 1));
+ sr32(&prcm_base->clksel3_pll, 0, 5, ptr->m2);
/* Workaround end */
- sr32(&prcm_base->clksel2_pll, 8, 11, dpll_param_p->m); /* set m */
- sr32(&prcm_base->clksel2_pll, 0, 7, dpll_param_p->n); /* set n */
- sr32(&prcm_base->clken_pll, 20, 4, dpll_param_p->fsel); /* FREQSEL */
- sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK); /* lock mode */
+ /* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:18] */
+ sr32(&prcm_base->clksel2_pll, 8, 11, ptr->m);
+
+ /* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
+ sr32(&prcm_base->clksel2_pll, 0, 7, ptr->n);
+
+ /* FREQSEL (PERIPH_DPLL_FREQSEL): CM_CLKEN_PLL[20:23] */
+ sr32(&prcm_base->clken_pll, 20, 4, ptr->fsel);
+
+ /* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
+ sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK);
wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY);
+}
- /* Getting the base address to MPU DPLL param table */
- dpll_param_p = (dpll_param *) get_mpu_dpll_param();
+static void mpu_init_34xx(u32 sil_index, u32 clk_index)
+{
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ dpll_param *ptr = (dpll_param *) get_mpu_dpll_param();
- /* Moving it to the right sysclk and ES rev base */
- dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+ /* Moving to the right sysclk and ES rev base */
+ ptr = ptr + (3 * clk_index) + sil_index;
/* MPU DPLL (unlocked already) */
- /* Set M2 */
- sr32(&prcm_base->clksel2_pll_mpu, 0, 5, dpll_param_p->m2);
- /* Set M */
- sr32(&prcm_base->clksel1_pll_mpu, 8, 11, dpll_param_p->m);
- /* Set N */
- sr32(&prcm_base->clksel1_pll_mpu, 0, 7, dpll_param_p->n);
- /* FREQSEL */
- sr32(&prcm_base->clken_pll_mpu, 4, 4, dpll_param_p->fsel);
- /* lock mode */
- sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK);
- wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, LDELAY);
-
- /* Getting the base address to IVA DPLL param table */
- dpll_param_p = (dpll_param *) get_iva_dpll_param();
-
- /* Moving it to the right sysclk and ES rev base */
- dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
-
- /* IVA DPLL (set to 12*20=240MHz) */
+ /* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
+ sr32(&prcm_base->clksel2_pll_mpu, 0, 5, ptr->m2);
+
+ /* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
+ sr32(&prcm_base->clksel1_pll_mpu, 8, 11, ptr->m);
+
+ /* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
+ sr32(&prcm_base->clksel1_pll_mpu, 0, 7, ptr->n);
+
+ /* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */
+ sr32(&prcm_base->clken_pll_mpu, 4, 4, ptr->fsel);
+}
+
+static void iva_init_34xx(u32 sil_index, u32 clk_index)
+{
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ dpll_param *ptr = (dpll_param *) get_iva_dpll_param();
+
+ /* Moving to the right sysclk and ES rev base */
+ ptr = ptr + (3 * clk_index) + sil_index;
+
+ /* IVA DPLL */
+ /* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
+ sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP);
+ wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY);
+
+ /* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
+ sr32(&prcm_base->clksel2_pll_iva2, 0, 5, ptr->m2);
+
+ /* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
+ sr32(&prcm_base->clksel1_pll_iva2, 8, 11, ptr->m);
+
+ /* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
+ sr32(&prcm_base->clksel1_pll_iva2, 0, 7, ptr->n);
+
+ /* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */
+ sr32(&prcm_base->clken_pll_iva2, 4, 4, ptr->fsel);
+
+ /* LOCK MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
+ sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK);
+
+ wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY);
+}
+
+/*
+ * OMAP3630 specific functions
+ */
+
+static void dpll3_init_36xx(u32 sil_index, u32 clk_index)
+{
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ dpll_param *ptr = (dpll_param *) get_36x_core_dpll_param();
+ void (*f_lock_pll) (u32, u32, u32, u32);
+ int xip_safe, p0, p1, p2, p3;
+
+ xip_safe = is_running_in_sram();
+
+ /* Moving it to the right sysclk base */
+ ptr += clk_index;
+
+ if (xip_safe) {
+ /* CORE DPLL */
+
+ /* Select relock bypass: CM_CLKEN_PLL[0:2] */
+ sr32(&prcm_base->clken_pll, 0, 3, PLL_FAST_RELOCK_BYPASS);
+ wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen,
+ LDELAY);
+
+ /* CM_CLKSEL1_EMU[DIV_DPLL3] */
+ sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2);
+
+ /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
+ sr32(&prcm_base->clksel1_pll, 27, 5, ptr->m2);
+
+ /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
+ sr32(&prcm_base->clksel1_pll, 16, 11, ptr->m);
+
+ /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
+ sr32(&prcm_base->clksel1_pll, 8, 7, ptr->n);
+
+ /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
+ sr32(&prcm_base->clksel1_pll, 6, 1, 0);
+
+ /* SSI */
+ sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV);
+ /* FSUSB */
+ sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV);
+ /* L4 */
+ sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV);
+ /* L3 */
+ sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV);
+ /* GFX */
+ sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV);
+ /* RESET MGR */
+ sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM);
+ /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
+ sr32(&prcm_base->clken_pll, 4, 4, ptr->fsel);
+ /* LOCK MODE */
+ sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK);
+
+ wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen,
+ LDELAY);
+ } else if (is_running_in_flash()) {
+ /*
+ * if running from flash, jump to small relocated code
+ * area in SRAM.
+ */
+ f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start +
+ SRAM_VECT_CODE);
+
+ p0 = readl(&prcm_base->clken_pll);
+ sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS);
+ /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
+ sr32(&p0, 4, 4, ptr->fsel);
+
+ p1 = readl(&prcm_base->clksel1_pll);
+ /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
+ sr32(&p1, 27, 5, ptr->m2);
+ /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
+ sr32(&p1, 16, 11, ptr->m);
+ /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
+ sr32(&p1, 8, 7, ptr->n);
+ /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
+ sr32(&p1, 6, 1, 0);
+
+ p2 = readl(&prcm_base->clksel_core);
+ /* SSI */
+ sr32(&p2, 8, 4, CORE_SSI_DIV);
+ /* FSUSB */
+ sr32(&p2, 4, 2, CORE_FUSB_DIV);
+ /* L4 */
+ sr32(&p2, 2, 2, CORE_L4_DIV);
+ /* L3 */
+ sr32(&p2, 0, 2, CORE_L3_DIV);
+
+ p3 = (u32)&prcm_base->idlest_ckgen;
+
+ (*f_lock_pll) (p0, p1, p2, p3);
+ }
+}
+
+static void dpll4_init_36xx(u32 sil_index, u32 clk_index)
+{
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ struct dpll_per_36x_param *ptr;
+
+ ptr = (struct dpll_per_36x_param *)get_36x_per_dpll_param();
+
+ /* Moving it to the right sysclk base */
+ ptr += clk_index;
+
+ /* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */
+ sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP);
+ wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
+
+ /* M6 (DIV_DPLL4): CM_CLKSEL1_EMU[24:29] */
+ sr32(&prcm_base->clksel1_emu, 24, 6, ptr->m6);
+
+ /* M5 (CLKSEL_CAM): CM_CLKSEL1_EMU[0:5] */
+ sr32(&prcm_base->clksel_cam, 0, 6, ptr->m5);
+
+ /* M4 (CLKSEL_DSS1): CM_CLKSEL_DSS[0:5] */
+ sr32(&prcm_base->clksel_dss, 0, 6, ptr->m4);
+
+ /* M3 (CLKSEL_DSS1): CM_CLKSEL_DSS[8:13] */
+ sr32(&prcm_base->clksel_dss, 8, 6, ptr->m3);
+
+ /* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */
+ sr32(&prcm_base->clksel3_pll, 0, 5, ptr->m2);
+
+ /* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:19] */
+ sr32(&prcm_base->clksel2_pll, 8, 12, ptr->m);
+
+ /* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
+ sr32(&prcm_base->clksel2_pll, 0, 7, ptr->n);
+
+ /* M2DIV (CLKSEL_96M): CM_CLKSEL_CORE[12:13] */
+ sr32(&prcm_base->clksel_core, 12, 2, ptr->m2div);
+
+ /* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
+ sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK);
+ wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY);
+}
+
+static void mpu_init_36xx(u32 sil_index, u32 clk_index)
+{
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ dpll_param *ptr = (dpll_param *) get_36x_mpu_dpll_param();
+
+ /* Moving to the right sysclk */
+ ptr += clk_index;
+
+ /* MPU DPLL (unlocked already */
+
+ /* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
+ sr32(&prcm_base->clksel2_pll_mpu, 0, 5, ptr->m2);
+
+ /* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
+ sr32(&prcm_base->clksel1_pll_mpu, 8, 11, ptr->m);
+
+ /* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
+ sr32(&prcm_base->clksel1_pll_mpu, 0, 7, ptr->n);
+}
+
+static void iva_init_36xx(u32 sil_index, u32 clk_index)
+{
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ dpll_param *ptr = (dpll_param *)get_36x_iva_dpll_param();
+
+ /* Moving to the right sysclk */
+ ptr += clk_index;
+
+ /* IVA DPLL */
+ /* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP);
wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY);
- /* set M2 */
- sr32(&prcm_base->clksel2_pll_iva2, 0, 5, dpll_param_p->m2);
- /* set M */
- sr32(&prcm_base->clksel1_pll_iva2, 8, 11, dpll_param_p->m);
- /* set N */
- sr32(&prcm_base->clksel1_pll_iva2, 0, 7, dpll_param_p->n);
- /* FREQSEL */
- sr32(&prcm_base->clken_pll_iva2, 4, 4, dpll_param_p->fsel);
- /* lock mode */
+
+ /* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
+ sr32(&prcm_base->clksel2_pll_iva2, 0, 5, ptr->m2);
+
+ /* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
+ sr32(&prcm_base->clksel1_pll_iva2, 8, 11, ptr->m);
+
+ /* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
+ sr32(&prcm_base->clksel1_pll_iva2, 0, 7, ptr->n);
+
+ /* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK);
+
wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY);
+}
+
+/******************************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h
+ * called from SRAM, or Flash (using temp SRAM stack).
+ *****************************************************************************/
+void prcm_init(void)
+{
+ u32 osc_clk = 0, sys_clkin_sel;
+ u32 clk_index, sil_index = 0;
+ struct prm *prm_base = (struct prm *)PRM_BASE;
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+
+ /*
+ * Gauge the input clock speed and find out the sys_clkin_sel
+ * value corresponding to the input clock.
+ */
+ osc_clk = get_osc_clk_speed();
+ get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
+
+ /* set input crystal speed */
+ sr32(&prm_base->clksel, 0, 3, sys_clkin_sel);
+
+ /* If the input clock is greater than 19.2M always divide/2 */
+ if (sys_clkin_sel > 2) {
+ /* input clock divider */
+ sr32(&prm_base->clksrc_ctrl, 6, 2, 2);
+ clk_index = sys_clkin_sel / 2;
+ } else {
+ /* input clock divider */
+ sr32(&prm_base->clksrc_ctrl, 6, 2, 1);
+ clk_index = sys_clkin_sel;
+ }
+
+ if (get_cpu_family() == CPU_OMAP36XX) {
+ /* Unlock MPU DPLL (slows things down, and needed later) */
+ sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS);
+ wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu,
+ LDELAY);
+
+ dpll3_init_36xx(0, clk_index);
+ dpll4_init_36xx(0, clk_index);
+ iva_init_36xx(0, clk_index);
+ mpu_init_36xx(0, clk_index);
+
+ /* Lock MPU DPLL to set frequency */
+ sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK);
+ wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu,
+ LDELAY);
+ } else {
+ /*
+ * The DPLL tables are defined according to sysclk value and
+ * silicon revision. The clk_index value will be used to get
+ * the values for that input sysclk from the DPLL param table
+ * and sil_index will get the values for that SysClk for the
+ * appropriate silicon rev.
+ */
+ if (((get_cpu_family() == CPU_OMAP34XX)
+ && (get_cpu_rev() >= CPU_3XX_ES20)) ||
+ (get_cpu_family() == CPU_AM35XX))
+ sil_index = 1;
+
+ /* Unlock MPU DPLL (slows things down, and needed later) */
+ sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS);
+ wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu,
+ LDELAY);
+
+ dpll3_init_34xx(sil_index, clk_index);
+ dpll4_init_34xx(sil_index, clk_index);
+ iva_init_34xx(sil_index, clk_index);
+ mpu_init_34xx(sil_index, clk_index);
+
+ /* Lock MPU DPLL to set frequency */
+ sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK);
+ wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu,
+ LDELAY);
+ }
/* Set up GPTimers to sys_clk source only */
sr32(&prcm_base->clksel_per, 0, 8, 0xff);
diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
index 73063ec8e66..91c6dbcc092 100644
--- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
@@ -359,3 +359,72 @@ per_dpll_param:
get_per_dpll_param:
adr r0, per_dpll_param
mov pc, lr
+
+/*
+ * Tables for 36XX/37XX devices
+ *
+ */
+mpu_36x_dpll_param:
+/* 12MHz */
+.word 50, 0, 0, 1
+/* 13MHz */
+.word 600, 12, 0, 1
+/* 19.2MHz */
+.word 125, 3, 0, 1
+/* 26MHz */
+.word 300, 12, 0, 1
+/* 38.4MHz */
+.word 125, 7, 0, 1
+
+iva_36x_dpll_param:
+/* 12MHz */
+.word 130, 2, 0, 1
+/* 13MHz */
+.word 20, 0, 0, 1
+/* 19.2MHz */
+.word 325, 11, 0, 1
+/* 26MHz */
+.word 10, 0, 0, 1
+/* 38.4MHz */
+.word 325, 23, 0, 1
+
+core_36x_dpll_param:
+/* 12MHz */
+.word 100, 2, 0, 1
+/* 13MHz */
+.word 400, 12, 0, 1
+/* 19.2MHz */
+.word 375, 17, 0, 1
+/* 26MHz */
+.word 200, 12, 0, 1
+/* 38.4MHz */
+.word 375, 35, 0, 1
+
+per_36x_dpll_param:
+/* SYSCLK M N M2 M3 M4 M5 M6 m2DIV */
+.word 12000, 360, 4, 9, 16, 5, 4, 3, 1
+.word 13000, 864, 12, 9, 16, 9, 4, 3, 1
+.word 19200, 360, 7, 9, 16, 5, 4, 3, 1
+.word 26000, 432, 12, 9, 16, 9, 4, 3, 1
+.word 38400, 360, 15, 9, 16, 5, 4, 3, 1
+
+.globl get_36x_mpu_dpll_param
+get_36x_mpu_dpll_param:
+ adr r0, mpu_36x_dpll_param
+ mov pc, lr
+
+.globl get_36x_iva_dpll_param
+get_36x_iva_dpll_param:
+ adr r0, iva_36x_dpll_param
+ mov pc, lr
+
+.globl get_36x_core_dpll_param
+get_36x_core_dpll_param:
+ adr r0, core_36x_dpll_param
+ mov pc, lr
+
+.globl get_36x_per_dpll_param
+get_36x_per_dpll_param:
+ adr r0, per_36x_dpll_param
+ mov pc, lr
+
diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c
index 96fd990c71c..8905224439b 100644
--- a/arch/arm/cpu/armv7/omap3/sdrc.c
+++ b/arch/arm/cpu/armv7/omap3/sdrc.c
@@ -107,18 +107,12 @@ u32 get_sdr_cs_offset(u32 cs)
/*
* do_sdrc_init -
* - Initialize the SDRAM for use.
- * - Sets up SDRC timings for CS0
* - code called once in C-Stack only context for CS0 and a possible 2nd
* time depending on memory configuration from stack+global context
*/
void do_sdrc_init(u32 cs, u32 early)
{
- struct sdrc_actim *sdrc_actim_base;
-
- if (cs)
- sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
- else
- sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
+ struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1;
if (early) {
/* reset sdrc controller */
@@ -138,24 +132,29 @@ void do_sdrc_init(u32 cs, u32 early)
sdelay(0x20000);
}
- writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY |
- RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 |
- DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg);
- writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl);
- writel(V_ACTIMA_165, &sdrc_actim_base->ctrla);
- writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb);
-
- writel(CMD_NOP, &sdrc_base->cs[cs].manual);
- writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
- writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
- writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
-
/*
- * CAS latency 3, Write Burst = Read Burst, Serial Mode,
- * Burst length = 4
+ * SDRC timings are set up by x-load or config header
+ * We don't need to redo them here.
+ * Older x-loads configure only CS0
+ * configure CS1 to handle this ommission
*/
- writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr);
+ if (cs) {
+ sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
+ sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
+ writel(readl(&sdrc_base->cs[CS0].mcfg),
+ &sdrc_base->cs[CS1].mcfg);
+ writel(readl(&sdrc_base->cs[CS0].rfr_ctrl),
+ &sdrc_base->cs[CS1].rfr_ctrl);
+ writel(readl(&sdrc_actim_base0->ctrla),
+ &sdrc_actim_base1->ctrla);
+ writel(readl(&sdrc_actim_base0->ctrlb),
+ &sdrc_actim_base1->ctrlb);
+ }
+ /*
+ * Test ram in this bank
+ * Disable if bad or not present
+ */
if (!mem_ok(cs))
writel(0, &sdrc_base->cs[cs].mcfg);
}
diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c
index 1df4401d492..549ac19189d 100644
--- a/arch/arm/cpu/armv7/omap3/sys_info.c
+++ b/arch/arm/cpu/armv7/omap3/sys_info.c
@@ -38,7 +38,10 @@ static char *rev_s[CPU_3XX_MAX_REV] = {
"2.0",
"2.1",
"3.0",
- "3.1"};
+ "3.1",
+ "UNKNOWN",
+ "UNKNOWN",
+ "3.1.2"};
/*****************************************************************
* dieid_num_r(void) - read and set die ID
@@ -75,32 +78,81 @@ u32 get_cpu_type(void)
}
/******************************************
- * get_cpu_rev(void) - extract version info
+ * get_cpu_id(void) - extract cpu id
+ * returns 0 for ES1.0, cpuid otherwise
******************************************/
-u32 get_cpu_rev(void)
+u32 get_cpu_id(void)
{
- u32 cpuid = 0;
struct ctrl_id *id_base;
+ u32 cpuid = 0;
/*
* On ES1.0 the IDCODE register is not exposed on L4
* so using CPU ID to differentiate between ES1.0 and > ES1.0.
*/
__asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid));
- if ((cpuid & 0xf) == 0x0)
- return CPU_3XX_ES10;
- else {
+ if ((cpuid & 0xf) == 0x0) {
+ return 0;
+ } else {
/* Decode the IDs on > ES1.0 */
id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE;
- cpuid = (readl(&id_base->idcode) >> CPU_3XX_ID_SHIFT) & 0xf;
+ cpuid = readl(&id_base->idcode);
+ }
- /* Some early ES2.0 seem to report ID 0, fix this */
- if(cpuid == 0)
- cpuid = CPU_3XX_ES20;
+ return cpuid;
+}
- return cpuid;
+/******************************************
+ * get_cpu_family(void) - extract cpu info
+ ******************************************/
+u32 get_cpu_family(void)
+{
+ u16 hawkeye;
+ u32 cpu_family;
+ u32 cpuid = get_cpu_id();
+
+ if (cpuid == 0)
+ return CPU_OMAP34XX;
+
+ hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff;
+ switch (hawkeye) {
+ case HAWKEYE_OMAP34XX:
+ cpu_family = CPU_OMAP34XX;
+ break;
+ case HAWKEYE_AM35XX:
+ cpu_family = CPU_AM35XX;
+ break;
+ case HAWKEYE_OMAP36XX:
+ cpu_family = CPU_OMAP36XX;
+ break;
+ default:
+ cpu_family = CPU_OMAP34XX;
}
+
+ return cpu_family;
+}
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+ u32 cpuid = get_cpu_id();
+
+ if (cpuid == 0)
+ return CPU_3XX_ES10;
+ else
+ return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf;
+}
+
+/*****************************************************************
+ * get_sku_id(void) - read sku_id to get info on max clock rate
+ *****************************************************************/
+u32 get_sku_id(void)
+{
+ struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
+ return readl(&id_base->sku_id) & SKUID_CLK_MASK;
}
/***************************************************************************
@@ -213,24 +265,66 @@ u32 get_device_type(void)
*/
int print_cpuinfo (void)
{
- char *cpu_s, *sec_s;
+ char *cpu_family_s, *cpu_s, *sec_s, *max_clk;
+
+ switch (get_cpu_family()) {
+ case CPU_OMAP34XX:
+ cpu_family_s = "OMAP";
+ switch (get_cpu_type()) {
+ case OMAP3503:
+ cpu_s = "3503";
+ break;
+ case OMAP3515:
+ cpu_s = "3515";
+ break;
+ case OMAP3525:
+ cpu_s = "3525";
+ break;
+ case OMAP3530:
+ cpu_s = "3530";
+ break;
+ default:
+ cpu_s = "35XX";
+ break;
+ }
+ if ((get_cpu_rev() >= CPU_3XX_ES31) &&
+ (get_sku_id() == SKUID_CLK_720MHZ))
+ max_clk = "720 mHz";
+ else
+ max_clk = "600 mHz";
- switch (get_cpu_type()) {
- case OMAP3503:
- cpu_s = "3503";
break;
- case OMAP3515:
- cpu_s = "3515";
+ case CPU_AM35XX:
+ cpu_family_s = "AM";
+ switch (get_cpu_type()) {
+ case AM3505:
+ cpu_s = "3505";
+ break;
+ case AM3517:
+ cpu_s = "3517";
+ break;
+ default:
+ cpu_s = "35XX";
+ break;
+ }
+ max_clk = "600 Mhz";
break;
- case OMAP3525:
- cpu_s = "3525";
- break;
- case OMAP3530:
- cpu_s = "3530";
+ case CPU_OMAP36XX:
+ cpu_family_s = "OMAP";
+ switch (get_cpu_type()) {
+ case OMAP3730:
+ cpu_s = "3630/3730";
+ break;
+ default:
+ cpu_s = "36XX/37XX";
+ break;
+ }
+ max_clk = "1 Ghz";
break;
default:
+ cpu_family_s = "OMAP";
cpu_s = "35XX";
- break;
+ max_clk = "600 Mhz";
}
switch (get_device_type()) {
@@ -250,8 +344,9 @@ int print_cpuinfo (void)
sec_s = "?";
}
- printf("OMAP%s-%s ES%s, CPU-OPP2 L3-165MHz\n",
- cpu_s, sec_s, rev_s[get_cpu_rev()]);
+ printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, Max CPU Clock %s\n",
+ cpu_family_s, cpu_s, sec_s,
+ rev_s[get_cpu_rev()], max_clk);
return 0;
}
diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile
new file mode 100644
index 00000000000..37371f6fda6
--- /dev/null
+++ b/arch/arm/cpu/armv7/s5p-common/Makefile
@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2009 Samsung Electronics
+# Minkyu Kang <mk7.kang@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)libs5p-common.a
+
+COBJS-y += cpu_info.o
+COBJS-y += timer.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/s5pc1xx/cpu_info.c b/arch/arm/cpu/armv7/s5p-common/cpu_info.c
index f16c0ff1307..2f6c7085546 100644
--- a/arch/arm/cpu/armv7/s5pc1xx/cpu_info.c
+++ b/arch/arm/cpu/armv7/s5p-common/cpu_info.c
@@ -25,15 +25,14 @@
#include <asm/arch/clk.h>
/* Default is s5pc100 */
-unsigned int s5pc1xx_cpu_id = 0xC100;
+unsigned int s5p_cpu_id = 0xC100;
#ifdef CONFIG_ARCH_CPU_INIT
int arch_cpu_init(void)
{
- s5pc1xx_cpu_id = readl(S5PC1XX_PRO_ID);
- s5pc1xx_cpu_id = 0xC000 | ((s5pc1xx_cpu_id & 0x00FFF000) >> 12);
+ s5p_set_cpu_id();
- s5pc1xx_clock_init();
+ s5p_clock_init();
return 0;
}
@@ -41,7 +40,7 @@ int arch_cpu_init(void)
u32 get_device_type(void)
{
- return s5pc1xx_cpu_id;
+ return s5p_cpu_id;
}
#ifdef CONFIG_DISPLAY_CPUINFO
@@ -50,7 +49,7 @@ int print_cpuinfo(void)
char buf[32];
printf("CPU:\tS5P%X@%sMHz\n",
- s5pc1xx_cpu_id, strmhz(buf, get_arm_clk()));
+ s5p_cpu_id, strmhz(buf, get_arm_clk()));
return 0;
}
diff --git a/arch/arm/cpu/armv7/s5pc1xx/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c
index c5df5c5ab53..04906503e6e 100644
--- a/arch/arm/cpu/armv7/s5pc1xx/timer.c
+++ b/arch/arm/cpu/armv7/s5p-common/timer.c
@@ -44,23 +44,20 @@ static unsigned long long timestamp; /* Monotonic incrementing timer */
static unsigned long lastdec; /* Last decremneter snapshot */
/* macro to read the 16 bit timer */
-static inline struct s5pc1xx_timer *s5pc1xx_get_base_timer(void)
+static inline struct s5p_timer *s5p_get_base_timer(void)
{
- if (cpu_is_s5pc110())
- return (struct s5pc1xx_timer *)S5PC110_TIMER_BASE;
- else
- return (struct s5pc1xx_timer *)S5PC100_TIMER_BASE;
+ return (struct s5p_timer *)samsung_get_base_timer();
}
int timer_init(void)
{
- struct s5pc1xx_timer *const timer = s5pc1xx_get_base_timer();
+ struct s5p_timer *const timer = s5p_get_base_timer();
u32 val;
/*
* @ PWM Timer 4
* Timer Freq(HZ) =
- * PCLK / { (prescaler_value + 1) * (divider_value) }
+ * PWM_CLK / { (prescaler_value + 1) * (divider_value) }
*/
/* set prescaler : 16 */
@@ -71,7 +68,7 @@ int timer_init(void)
if (count_value == 0) {
/* reset initial value */
/* count_value = 2085937.5(HZ) (per 1 sec)*/
- count_value = get_pclk() / ((PRESCALER_1 + 1) *
+ count_value = get_pwm_clk() / ((PRESCALER_1 + 1) *
(MUX_DIV_2 + 1));
/* count_value / 100 = 20859.375(HZ) (per 10 msec) */
@@ -83,13 +80,13 @@ int timer_init(void)
lastdec = count_value;
val = (readl(&timer->tcon) & ~(0x07 << TCON_TIMER4_SHIFT)) |
- S5PC1XX_TCON4_AUTO_RELOAD;
+ TCON4_AUTO_RELOAD;
/* auto reload & manual update */
- writel(val | S5PC1XX_TCON4_UPDATE, &timer->tcon);
+ writel(val | TCON4_UPDATE, &timer->tcon);
/* start PWM timer 4 */
- writel(val | S5PC1XX_TCON4_START, &timer->tcon);
+ writel(val | TCON4_START, &timer->tcon);
timestamp = 0;
@@ -154,7 +151,7 @@ void __udelay(unsigned long usec)
void reset_timer_masked(void)
{
- struct s5pc1xx_timer *const timer = s5pc1xx_get_base_timer();
+ struct s5p_timer *const timer = s5p_get_base_timer();
/* reset time */
lastdec = readl(&timer->tcnto4);
@@ -163,7 +160,7 @@ void reset_timer_masked(void)
unsigned long get_timer_masked(void)
{
- struct s5pc1xx_timer *const timer = s5pc1xx_get_base_timer();
+ struct s5p_timer *const timer = s5p_get_base_timer();
unsigned long now = readl(&timer->tcnto4);
if (lastdec >= now)
diff --git a/arch/arm/cpu/armv7/s5pc1xx/Makefile b/arch/arm/cpu/armv7/s5pc1xx/Makefile
index 3785593d25a..263945f4e77 100644
--- a/arch/arm/cpu/armv7/s5pc1xx/Makefile
+++ b/arch/arm/cpu/armv7/s5pc1xx/Makefile
@@ -32,9 +32,7 @@ SOBJS = cache.o
SOBJS += reset.o
COBJS += clock.o
-COBJS += cpu_info.o
COBJS += sromc.o
-COBJS += timer.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/s5pc1xx/clock.c b/arch/arm/cpu/armv7/s5pc1xx/clock.c
index 19619f92cd9..98a27e551db 100644
--- a/arch/arm/cpu/armv7/s5pc1xx/clock.c
+++ b/arch/arm/cpu/armv7/s5pc1xx/clock.c
@@ -38,14 +38,16 @@
#define CONFIG_SYS_CLK_FREQ_C110 24000000
#endif
-unsigned long (*get_pclk)(void);
+unsigned long (*get_uart_clk)(int dev_index);
+unsigned long (*get_pwm_clk)(void);
unsigned long (*get_arm_clk)(void);
unsigned long (*get_pll_clk)(int);
/* s5pc110: return pll clock frequency */
static unsigned long s5pc100_get_pll_clk(int pllreg)
{
- struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+ struct s5pc100_clock *clk =
+ (struct s5pc100_clock *)samsung_get_base_clock();
unsigned long r, m, p, s, mask, fout;
unsigned int freq;
@@ -95,7 +97,8 @@ static unsigned long s5pc100_get_pll_clk(int pllreg)
/* s5pc100: return pll clock frequency */
static unsigned long s5pc110_get_pll_clk(int pllreg)
{
- struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE;
+ struct s5pc110_clock *clk =
+ (struct s5pc110_clock *)samsung_get_base_clock();
unsigned long r, m, p, s, mask, fout;
unsigned int freq;
@@ -151,7 +154,8 @@ static unsigned long s5pc110_get_pll_clk(int pllreg)
/* s5pc110: return ARM clock frequency */
static unsigned long s5pc110_get_arm_clk(void)
{
- struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE;
+ struct s5pc110_clock *clk =
+ (struct s5pc110_clock *)samsung_get_base_clock();
unsigned long div;
unsigned long dout_apll, armclk;
unsigned int apll_ratio;
@@ -170,7 +174,8 @@ static unsigned long s5pc110_get_arm_clk(void)
/* s5pc100: return ARM clock frequency */
static unsigned long s5pc100_get_arm_clk(void)
{
- struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+ struct s5pc100_clock *clk =
+ (struct s5pc100_clock *)samsung_get_base_clock();
unsigned long div;
unsigned long dout_apll, armclk;
unsigned int apll_ratio, arm_ratio;
@@ -191,7 +196,8 @@ static unsigned long s5pc100_get_arm_clk(void)
/* s5pc100: return HCLKD0 frequency */
static unsigned long get_hclk(void)
{
- struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+ struct s5pc100_clock *clk =
+ (struct s5pc100_clock *)samsung_get_base_clock();
unsigned long hclkd0;
uint div, d0_bus_ratio;
@@ -207,7 +213,8 @@ static unsigned long get_hclk(void)
/* s5pc100: return PCLKD1 frequency */
static unsigned long get_pclkd1(void)
{
- struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+ struct s5pc100_clock *clk =
+ (struct s5pc100_clock *)samsung_get_base_clock();
unsigned long d1_bus, pclkd1;
uint div, d1_bus_ratio, pclkd1_ratio;
@@ -227,7 +234,8 @@ static unsigned long get_pclkd1(void)
/* s5pc110: return HCLKs frequency */
static unsigned long get_hclk_sys(int dom)
{
- struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE;
+ struct s5pc110_clock *clk =
+ (struct s5pc110_clock *)samsung_get_base_clock();
unsigned long hclk;
unsigned int div;
unsigned int offset;
@@ -255,7 +263,8 @@ static unsigned long get_hclk_sys(int dom)
/* s5pc110: return PCLKs frequency */
static unsigned long get_pclk_sys(int dom)
{
- struct s5pc110_clock *clk = (struct s5pc110_clock *)S5PC1XX_CLOCK_BASE;
+ struct s5pc110_clock *clk =
+ (struct s5pc110_clock *)samsung_get_base_clock();
unsigned long pclk;
unsigned int div;
unsigned int offset;
@@ -289,15 +298,33 @@ static unsigned long s5pc100_get_pclk(void)
return get_pclkd1();
}
-void s5pc1xx_clock_init(void)
+/* s5pc1xx: return uart clock frequency */
+static unsigned long s5pc1xx_get_uart_clk(int dev_index)
+{
+ if (cpu_is_s5pc110())
+ return s5pc110_get_pclk();
+ else
+ return s5pc100_get_pclk();
+}
+
+/* s5pc1xx: return pwm clock frequency */
+static unsigned long s5pc1xx_get_pwm_clk(void)
+{
+ if (cpu_is_s5pc110())
+ return s5pc110_get_pclk();
+ else
+ return s5pc100_get_pclk();
+}
+
+void s5p_clock_init(void)
{
if (cpu_is_s5pc110()) {
get_pll_clk = s5pc110_get_pll_clk;
get_arm_clk = s5pc110_get_arm_clk;
- get_pclk = s5pc110_get_pclk;
} else {
get_pll_clk = s5pc100_get_pll_clk;
get_arm_clk = s5pc100_get_arm_clk;
- get_pclk = s5pc100_get_pclk;
}
+ get_uart_clk = s5pc1xx_get_uart_clk;
+ get_pwm_clk = s5pc1xx_get_pwm_clk;
}
diff --git a/arch/arm/cpu/armv7/s5pc1xx/reset.S b/arch/arm/cpu/armv7/s5pc1xx/reset.S
index 7f6ff9c35f2..70fa146cf38 100644
--- a/arch/arm/cpu/armv7/s5pc1xx/reset.S
+++ b/arch/arm/cpu/armv7/s5pc1xx/reset.S
@@ -28,7 +28,7 @@
.globl reset_cpu
reset_cpu:
- ldr r1, =S5PC1XX_PRO_ID
+ ldr r1, =S5PC100_PRO_ID
ldr r2, [r1]
ldr r4, =0x00010000
and r4, r2, r4
diff --git a/arch/arm/cpu/armv7/s5pc1xx/sromc.c b/arch/arm/cpu/armv7/s5pc1xx/sromc.c
index 380be81be5e..044d12298db 100644
--- a/arch/arm/cpu/armv7/s5pc1xx/sromc.c
+++ b/arch/arm/cpu/armv7/s5pc1xx/sromc.c
@@ -35,12 +35,8 @@
void s5pc1xx_config_sromc(u32 srom_bank, u32 smc_bw_conf, u32 smc_bc_conf)
{
u32 tmp;
- struct s5pc1xx_smc *srom;
-
- if (cpu_is_s5pc100())
- srom = (struct s5pc1xx_smc *)S5PC100_SROMC_BASE;
- else
- srom = (struct s5pc1xx_smc *)S5PC110_SROMC_BASE;
+ struct s5pc1xx_smc *srom =
+ (struct s5pc1xx_smc *)samsung_get_base_sromc();
/* Configure SMC_BW register to handle proper SROMC bank */
tmp = srom->bw;
diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h
index 01840eede41..0067190a20e 100644
--- a/arch/arm/include/asm/arch-at91/at91_common.h
+++ b/arch/arm/include/asm/arch-at91/at91_common.h
@@ -27,6 +27,7 @@
void at91_can_hw_init(void);
void at91_macb_hw_init(void);
+void at91_mci_hw_init(void);
void at91_serial_hw_init(void);
void at91_serial0_hw_init(void);
void at91_serial1_hw_init(void);
diff --git a/arch/arm/include/asm/arch-at91/at91_dbu.h b/arch/arm/include/asm/arch-at91/at91_dbu.h
new file mode 100644
index 00000000000..34292935359
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/at91_dbu.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * Debug Unit
+ * Based on AT91SAM9XE datasheet
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_DBU_H
+#define AT91_DBU_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_dbu {
+ u32 cr; /* Control Register WO */
+ u32 mr; /* Mode Register RW */
+ u32 ier; /* Interrupt Enable Register WO */
+ u32 idr; /* Interrupt Disable Register WO */
+ u32 imr; /* Interrupt Mask Register RO */
+ u32 sr; /* Status Register RO */
+ u32 rhr; /* Receive Holding Register RO */
+ u32 thr; /* Transmit Holding Register WO */
+ u32 brgr; /* Baud Rate Generator Register RW */
+ u32 res1[7];/* 0x0024 - 0x003C Reserved */
+ u32 cidr; /* Chip ID Register RO */
+ u32 exid; /* Chip ID Extension Register RO */
+ u32 fnr; /* Force NTRST Register RW */
+} at91_dbu_t;
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_DBU_CID_ARCH_MASK 0x0ff00000
+#define AT91_DBU_CID_ARCH_9xx 0x01900000
+#define AT91_DBU_CID_ARCH_9XExx 0x02900000
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/at91_eefc.h b/arch/arm/include/asm/arch-at91/at91_eefc.h
new file mode 100644
index 00000000000..d45b3deca48
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/at91_eefc.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * Enhanced Embedded Flash Controller
+ * Based on AT91SAM9XE datasheet
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_EEFC_H
+#define AT91_EEFC_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_eefc {
+ u32 fmr; /* Flash Mode Register RW */
+ u32 fcr; /* Flash Command Register WO */
+ u32 fsr; /* Flash Status Register RO */
+ u32 frr; /* Flash Result Register RO */
+} at91_eefc_t;
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_EEFC_FMR_FWS_MASK 0x00000f00
+#define AT91_EEFC_FMR_FRDY_BIT 0x00000001
+
+#define AT91_EEFC_FCR_KEY 0x5a000000
+#define AT91_EEFC_FCR_FARG_MASK 0x00ffff00
+#define AT91_EEFC_FCR_FARG_SHIFT 8
+#define AT91_EEFC_FCR_FCMD_GETD 0x0
+#define AT91_EEFC_FCR_FCMD_WP 0x1
+#define AT91_EEFC_FCR_FCMD_WPL 0x2
+#define AT91_EEFC_FCR_FCMD_EWP 0x3
+#define AT91_EEFC_FCR_FCMD_EWPL 0x4
+#define AT91_EEFC_FCR_FCMD_EA 0x5
+#define AT91_EEFC_FCR_FCMD_SLB 0x8
+#define AT91_EEFC_FCR_FCMD_CLB 0x9
+#define AT91_EEFC_FCR_FCMD_GLB 0xA
+#define AT91_EEFC_FCR_FCMD_SGPB 0xB
+#define AT91_EEFC_FCR_FCMD_CGPB 0xC
+#define AT91_EEFC_FCR_FCMD_GGPB 0xD
+
+#define AT91_EEFC_FSR_FRDY 1
+#define AT91_EEFC_FSR_FCMDE 2
+#define AT91_EEFC_FSR_FLOCKE 4
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/at91_gpbr.h b/arch/arm/include/asm/arch-at91/at91_gpbr.h
new file mode 100644
index 00000000000..cf1d790dd9d
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/at91_gpbr.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * General Purpose Backup Registers
+ * Based on AT91SAM9XE datasheet
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_GPBR_H
+#define AT91_GPBR_H
+
+/*
+ * The Atmel AT91SAM9 series has a small resource of 4 nonvolatile
+ * 32 Bit registers (buffered by the Vbu power).
+ *
+ * Please consider carefully before using this resource for tasks
+ * that do not really need nonvolatile registers. Maybe you can
+ * store information in EEPROM or FLASH instead.
+ *
+ * However, if you use a GPBR please document its use here and
+ * reference the define in your code!
+ *
+ * known typical uses of the GPBRs:
+ * GPBR[0]: offset for RTT timekeeping (u-boot, kernel)
+ * GPBR[1]: unused
+ * GPBR[2]: unused
+ * GPBR[3]: bootcount (u-boot)
+ */
+#define AT91_GPBR_INDEX_TIMEOFF 0
+#define AT91_GPBR_INDEX_BOOTCOUNT 3
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_gpbr {
+ u32 reg[4];
+} at91_gpbr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/at91_pit.h b/arch/arm/include/asm/arch-at91/at91_pit.h
index 5615a0206ca..61aca79418a 100644
--- a/arch/arm/include/asm/arch-at91/at91_pit.h
+++ b/arch/arm/include/asm/arch-at91/at91_pit.h
@@ -25,7 +25,7 @@ typedef struct at91_pit {
#define AT91_PIT_MR_IEN 0x02000000
#define AT91_PIT_MR_EN 0x01000000
-#define AT91_PIT_MR_PIV_MASK (x & 0x000fffff)
+#define AT91_PIT_MR_PIV_MASK(x) (x & 0x000fffff)
#define AT91_PIT_MR_PIV(x) (x & AT91_PIT_MR_PIV_MASK)
#ifdef CONFIG_AT91_LEGACY
diff --git a/arch/arm/include/asm/arch-at91/at91_rtt.h b/arch/arm/include/asm/arch-at91/at91_rtt.h
new file mode 100644
index 00000000000..e0253ef8214
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/at91_rtt.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * Real-time Timer
+ * Based on AT91SAM9XE datasheet
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTT_H
+#define AT91_RTT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct at91_rtt {
+ u32 mr; /* Mode Register RW 0x00008000 */
+ u32 ar; /* Alarm Register RW 0xFFFFFFFF */
+ u32 vr; /* Value Register RO 0x00000000 */
+ u32 sr; /* Status Register RO 0x00000000 */
+} at91_rtt_t;
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_RTT_MR_RTPRES 0x0000ffff
+#define AT91_RTT_MR_ALMIEN 0x00010000
+#define AT91_RTT_RTTINCIEN 0x00020000
+#define AT91_RTT_RTTRST 0x00040000
+
+#define AT91_RTT_SR_ALMS 0x00000001
+#define AT91_RTT_SR_RTTINC 0x00000002
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9260.h b/arch/arm/include/asm/arch-at91/at91sam9260.h
index ec043180369..cb34a94a3b3 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9260.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9260.h
@@ -59,7 +59,15 @@
#define AT91_RTT_BASE 0xfffffd20
#define AT91_PIT_BASE 0xfffffd30
#define AT91_WDT_BASE 0xfffffd40
-#define AT91_GPR_BASE 0xfffffd50
+/*
+ * The AT91SAM9XE has the GPBRs at a different address than
+ * the AT91SAM9260/9G20.
+ */
+#ifdef CONFIG_AT91SAM9XE
+# define AT91_GPR_BASE 0xfffffd60
+#else
+# define AT91_GPR_BASE 0xfffffd50
+#endif
#ifdef CONFIG_AT91_LEGACY
@@ -140,10 +148,12 @@
/*
* Cpu Name
*/
-#if defined(CONFIG_AT91SAM9260)
-#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9260"
+#if defined(CONFIG_AT91SAM9XE)
+# define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9XE"
+#elif defined(CONFIG_AT91SAM9260)
+# define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9260"
#elif defined(CONFIG_AT91SAM9G20)
-#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G20"
+# define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G20"
#endif
#endif
diff --git a/arch/arm/include/asm/arch-at91/clk.h b/arch/arm/include/asm/arch-at91/clk.h
index f642dd99585..457e6c9b2b5 100644
--- a/arch/arm/include/asm/arch-at91/clk.h
+++ b/arch/arm/include/asm/arch-at91/clk.h
@@ -59,5 +59,10 @@ static inline unsigned long get_twi_clk_rate(unsigned int dev_id)
return get_mck_clk_rate();
}
+static inline unsigned long get_mci_clk_rate(void)
+{
+ return get_mck_clk_rate();
+}
+
int at91_clock_init(unsigned long main_clock);
#endif /* __ASM_ARM_ARCH_CLK_H__ */
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
index 4ddb3155d7c..9f732a738e2 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -20,6 +20,7 @@
#include <asm/arch-at91/at91rm9200.h>
#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20)
#include <asm/arch/at91sam9260.h>
+#define AT91_BASE_MCI AT91SAM9260_BASE_MCI
#define AT91_BASE_SPI AT91SAM9260_BASE_SPI0
#define AT91_ID_UHP AT91SAM9260_ID_UHP
#define AT91_PMC_UHP AT91SAM926x_PMC_UHP
diff --git a/arch/arm/include/asm/arch-mb86r0x/asm-offsets.h b/arch/arm/include/asm/arch-mb86r0x/asm-offsets.h
new file mode 100644
index 00000000000..0bc5279137b
--- /dev/null
+++ b/arch/arm/include/asm/arch-mb86r0x/asm-offsets.h
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2010
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef ASM_OFFSETS_H
+#define ASM_OFFSETS_H
+
+/*
+ * Offset definitions for DDR controller
+ */
+#define DDR2_DRIC 0x00
+#define DDR2_DRIC1 0x02
+#define DDR2_DRIC2 0x04
+#define DDR2_DRCA 0x06
+#define DDR2_DRCM 0x08
+#define DDR2_DRCST1 0x0a
+#define DDR2_DRCST2 0x0c
+#define DDR2_DRCR 0x0e
+#define DDR2_DRCF 0x20
+#define DDR2_DRASR 0x30
+#define DDR2_DRIMS 0x50
+#define DDR2_DROS 0x60
+#define DDR2_DRIBSODT1 0x64
+#define DDR2_DROABA 0x70
+#define DDR2_DROBS 0x84
+
+/*
+ * Offset definitions Chip Control Module
+ */
+#define CCNT_CDCRC 0xec
+
+/*
+ * Offset definitions clock reset generator
+ */
+#define CRG_CRPR 0x00
+#define CRG_CRHA 0x18
+#define CRG_CRPA 0x1c
+#define CRG_CRPB 0x20
+#define CRG_CRHB 0x24
+#define CRG_CRAM 0x28
+
+/*
+ * Offset definitions External bus interface
+ */
+#define MEMC_MCFMODE0 0x00
+#define MEMC_MCFMODE2 0x08
+#define MEMC_MCFMODE4 0x10
+#define MEMC_MCFTIM0 0x20
+#define MEMC_MCFTIM2 0x28
+#define MEMC_MCFTIM4 0x30
+#define MEMC_MCFAREA0 0x40
+#define MEMC_MCFAREA2 0x48
+#define MEMC_MCFAREA4 0x50
+
+#endif /* ASM_OFFSETS_H */
diff --git a/arch/arm/include/asm/arch-mb86r0x/hardware.h b/arch/arm/include/asm/arch-mb86r0x/hardware.h
new file mode 100644
index 00000000000..d1e57c03497
--- /dev/null
+++ b/arch/arm/include/asm/arch-mb86r0x/hardware.h
@@ -0,0 +1,31 @@
+/*
+ * (C) Copyright 2007
+ *
+ * Author : Carsten Schneider, mycable GmbH
+ * <cs@mycable.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <asm/arch/mb86r0x.h>
+
+#endif
diff --git a/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h b/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h
new file mode 100644
index 00000000000..36a28b7af33
--- /dev/null
+++ b/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h
@@ -0,0 +1,573 @@
+/*
+ * (C) Copyright 2007
+ *
+ * mb86r0x definitions
+ *
+ * Author : Carsten Schneider, mycable GmbH
+ * <cs@mycable.de>
+ *
+ * (C) Copyright 2010
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef MB86R0X_H
+#define MB86R0X_H
+
+#ifndef __ASSEMBLY__
+
+/* GPIO registers */
+struct mb86r0x_gpio {
+ uint32_t gpdr0;
+ uint32_t gpdr1;
+ uint32_t gpdr2;
+ uint32_t res;
+ uint32_t gpddr0;
+ uint32_t gpddr1;
+ uint32_t gpddr2;
+};
+
+/* PWM registers */
+struct mb86r0x_pwm {
+ uint32_t bcr;
+ uint32_t tpr;
+ uint32_t pr;
+ uint32_t dr;
+ uint32_t cr;
+ uint32_t sr;
+ uint32_t ccr;
+ uint32_t ir;
+};
+
+/* The mb86r0x chip control (CCNT) register set. */
+struct mb86r0x_ccnt {
+ uint32_t ccid;
+ uint32_t csrst;
+ uint32_t pad0[2];
+ uint32_t cist;
+ uint32_t cistm;
+ uint32_t cgpio_ist;
+ uint32_t cgpio_istm;
+ uint32_t cgpio_ip;
+ uint32_t cgpio_im;
+ uint32_t caxi_bw;
+ uint32_t caxi_ps;
+ uint32_t cmux_md;
+ uint32_t cex_pin_st;
+ uint32_t cmlb;
+ uint32_t pad1[1];
+ uint32_t cusb;
+ uint32_t pad2[41];
+ uint32_t cbsc;
+ uint32_t cdcrc;
+ uint32_t cmsr0;
+ uint32_t cmsr1;
+ uint32_t pad3[2];
+};
+
+/* The mb86r0x clock reset generator */
+struct mb86r0x_crg {
+ uint32_t crpr;
+ uint32_t pad0;
+ uint32_t crwr;
+ uint32_t crsr;
+ uint32_t crda;
+ uint32_t crdb;
+ uint32_t crha;
+ uint32_t crpa;
+ uint32_t crpb;
+ uint32_t crhb;
+ uint32_t cram;
+};
+
+/* The mb86r0x timer */
+struct mb86r0x_timer {
+ uint32_t load;
+ uint32_t value;
+ uint32_t control;
+ uint32_t intclr;
+ uint32_t ris;
+ uint32_t mis;
+ uint32_t bgload;
+};
+
+/* mb86r0x gdc display controller */
+struct mb86r0x_gdc_dsp {
+ /* Display settings */
+ uint32_t dcm0;
+ uint16_t pad00;
+ uint16_t htp;
+ uint16_t hdp;
+ uint16_t hdb;
+ uint16_t hsp;
+ uint8_t hsw;
+ uint8_t vsw;
+ uint16_t pad01;
+ uint16_t vtr;
+ uint16_t vsp;
+ uint16_t vdp;
+ uint16_t wx;
+ uint16_t wy;
+ uint16_t ww;
+ uint16_t wh;
+
+ /* Layer 0 */
+ uint32_t l0m;
+ uint32_t l0oa;
+ uint32_t l0da;
+ uint16_t l0dx;
+ uint16_t l0dy;
+
+ /* Layer 1 */
+ uint32_t l1m;
+ uint32_t cbda0;
+ uint32_t cbda1;
+ uint32_t pad02;
+
+ /* Layer 2 */
+ uint32_t l2m;
+ uint32_t l2oa0;
+ uint32_t l2da0;
+ uint32_t l2oa1;
+ uint32_t l2da1;
+ uint16_t l2dx;
+ uint16_t l2dy;
+
+ /* Layer 3 */
+ uint32_t l3m;
+ uint32_t l3oa0;
+ uint32_t l3da0;
+ uint32_t l3oa1;
+ uint32_t l3da1;
+ uint16_t l3dx;
+ uint16_t l3dy;
+
+ /* Layer 4 */
+ uint32_t l4m;
+ uint32_t l4oa0;
+ uint32_t l4da0;
+ uint32_t l4oa1;
+ uint32_t l4da1;
+ uint16_t l4dx;
+ uint16_t l4dy;
+
+ /* Layer 5 */
+ uint32_t l5m;
+ uint32_t l5oa0;
+ uint32_t l5da0;
+ uint32_t l5oa1;
+ uint32_t l5da1;
+ uint16_t l5dx;
+ uint16_t l5dy;
+
+ /* Cursor */
+ uint16_t cutc;
+ uint8_t cpm;
+ uint8_t csize;
+ uint32_t cuoa0;
+ uint16_t cux0;
+ uint16_t cuy0;
+ uint32_t cuoa1;
+ uint16_t cux1;
+ uint16_t cuy1;
+
+ /* Layer blending */
+ uint32_t l0bld;
+ uint32_t pad03;
+ uint32_t l0tc;
+ uint16_t l3tc;
+ uint16_t l2tc;
+ uint32_t pad04[15];
+
+ /* Display settings */
+ uint32_t dcm1;
+ uint32_t dcm2;
+ uint32_t dcm3;
+ uint32_t pad05;
+
+ /* Layer 0 extended */
+ uint32_t l0em;
+ uint16_t l0wx;
+ uint16_t l0wy;
+ uint16_t l0ww;
+ uint16_t l0wh;
+ uint32_t pad06;
+
+ /* Layer 1 extended */
+ uint32_t l1em;
+ uint16_t l1wx;
+ uint16_t l1wy;
+ uint16_t l1ww;
+ uint16_t l1wh;
+ uint32_t pad07;
+
+ /* Layer 2 extended */
+ uint32_t l2em;
+ uint16_t l2wx;
+ uint16_t l2wy;
+ uint16_t l2ww;
+ uint16_t l2wh;
+ uint32_t pad08;
+
+ /* Layer 3 extended */
+ uint32_t l3em;
+ uint16_t l3wx;
+ uint16_t l3wy;
+ uint16_t l3ww;
+ uint16_t l3wh;
+ uint32_t pad09;
+
+ /* Layer 4 extended */
+ uint32_t l4em;
+ uint16_t l4wx;
+ uint16_t l4wy;
+ uint16_t l4ww;
+ uint16_t l4wh;
+ uint32_t pad10;
+
+ /* Layer 5 extended */
+ uint32_t l5em;
+ uint16_t l5wx;
+ uint16_t l5wy;
+ uint16_t l5ww;
+ uint16_t l5wh;
+ uint32_t pad11;
+
+ /* Multi screen control */
+ uint32_t msc;
+ uint32_t pad12[3];
+ uint32_t dls;
+ uint32_t dbgc;
+
+ /* Layer blending */
+ uint32_t l1bld;
+ uint32_t l2bld;
+ uint32_t l3bld;
+ uint32_t l4bld;
+ uint32_t l5bld;
+ uint32_t pad13;
+
+ /* Extended transparency control */
+ uint32_t l0etc;
+ uint32_t l1etc;
+ uint32_t l2etc;
+ uint32_t l3etc;
+ uint32_t l4etc;
+ uint32_t l5etc;
+ uint32_t pad14[10];
+
+ /* YUV coefficients */
+ uint32_t l1ycr0;
+ uint32_t l1ycr1;
+ uint32_t l1ycg0;
+ uint32_t l1ycg1;
+ uint32_t l1ycb0;
+ uint32_t l1ycb1;
+ uint32_t pad15[130];
+
+ /* Layer palletes */
+ uint32_t l0pal[256];
+ uint32_t l1pal[256];
+ uint32_t pad16[256];
+ uint32_t l2pal[256];
+ uint32_t l3pal[256];
+ uint32_t pad17[256];
+
+ /* PWM settings */
+ uint32_t vpwmm;
+ uint16_t vpwms;
+ uint16_t vpwme;
+ uint32_t vpwmc;
+ uint32_t pad18[253];
+};
+
+/* mb86r0x gdc capture controller */
+struct mb86r0x_gdc_cap {
+ uint32_t vcm;
+ uint32_t csc;
+ uint32_t vcs;
+ uint32_t pad01;
+
+ uint32_t cbm;
+ uint32_t cboa;
+ uint32_t cbla;
+ uint16_t cihstr;
+ uint16_t civstr;
+ uint16_t cihend;
+ uint16_t civend;
+ uint32_t pad02;
+
+ uint32_t chp;
+ uint32_t cvp;
+ uint32_t pad03[4];
+
+ uint32_t clpf;
+ uint32_t pad04;
+ uint32_t cmss;
+ uint32_t cmds;
+ uint32_t pad05[12];
+
+ uint32_t rgbhc;
+ uint32_t rgbhen;
+ uint32_t rgbven;
+ uint32_t pad06;
+ uint32_t rgbs;
+ uint32_t pad07[11];
+
+ uint32_t rgbcmy;
+ uint32_t rgbcmcb;
+ uint32_t rgbcmcr;
+ uint32_t rgbcmb;
+ uint32_t pad08[12 + 1984];
+};
+
+/* mb86r0x gdc draw */
+struct mb86r0x_gdc_draw {
+ uint32_t ys;
+ uint32_t xs;
+ uint32_t dxdy;
+ uint32_t xus;
+ uint32_t dxudy;
+ uint32_t xls;
+ uint32_t dxldy;
+ uint32_t usn;
+ uint32_t lsn;
+ uint32_t pad01[7];
+ uint32_t rs;
+ uint32_t drdx;
+ uint32_t drdy;
+ uint32_t gs;
+ uint32_t dgdx;
+ uint32_t dgdy;
+ uint32_t bs;
+ uint32_t dbdx;
+ uint32_t dbdy;
+ uint32_t pad02[7];
+ uint32_t zs;
+ uint32_t dzdx;
+ uint32_t dzdy;
+ uint32_t pad03[13];
+ uint32_t ss;
+ uint32_t dsdx;
+ uint32_t dsdy;
+ uint32_t ts;
+ uint32_t dtdx;
+ uint32_t dtdy;
+ uint32_t qs;
+ uint32_t dqdx;
+ uint32_t dqdy;
+ uint32_t pad04[23];
+ uint32_t lpn;
+ uint32_t lxs;
+ uint32_t lxde;
+ uint32_t lys;
+ uint32_t lyde;
+ uint32_t lzs;
+ uint32_t lzde;
+ uint32_t pad05[13];
+ uint32_t pxdc;
+ uint32_t pydc;
+ uint32_t pzdc;
+ uint32_t pad06[25];
+ uint32_t rxs;
+ uint32_t rys;
+ uint32_t rsizex;
+ uint32_t rsizey;
+ uint32_t pad07[12];
+ uint32_t saddr;
+ uint32_t sstride;
+ uint32_t srx;
+ uint32_t sry;
+ uint32_t daddr;
+ uint32_t dstride;
+ uint32_t drx;
+ uint32_t dry;
+ uint32_t brsizex;
+ uint32_t brsizey;
+ uint32_t tcolor;
+ uint32_t pad08[93];
+ uint32_t blpo;
+ uint32_t pad09[7];
+ uint32_t ctr;
+ uint32_t ifsr;
+ uint32_t ifcnt;
+ uint32_t sst;
+ uint32_t ds;
+ uint32_t pst;
+ uint32_t est;
+ uint32_t pad10;
+ uint32_t mdr0;
+ uint32_t mdr1;
+ uint32_t mdr2;
+ uint32_t mdr3;
+ uint32_t mdr4;
+ uint32_t pad14[2];
+ uint32_t mdr7;
+ uint32_t fbr;
+ uint32_t xres;
+ uint32_t zbr;
+ uint32_t tbr;
+ uint32_t pfbr;
+ uint32_t cxmin;
+ uint32_t cxmax;
+ uint32_t cymin;
+ uint32_t cymax;
+ uint32_t txs;
+ uint32_t tis;
+ uint32_t toa;
+ uint32_t sho;
+ uint32_t abr;
+ uint32_t pad15[2];
+ uint32_t fc;
+ uint32_t bc;
+ uint32_t alf;
+ uint32_t blp;
+ uint32_t pad16;
+ uint32_t tbc;
+ uint32_t pad11[42];
+ uint32_t lx0dc;
+ uint32_t ly0dc;
+ uint32_t lx1dc;
+ uint32_t ly1dc;
+ uint32_t pad12[12];
+ uint32_t x0dc;
+ uint32_t y0dc;
+ uint32_t x1dc;
+ uint32_t y1dc;
+ uint32_t x2dc;
+ uint32_t y2dc;
+ uint32_t pad13[666];
+};
+
+/* mb86r0x gdc geometry engine */
+struct mb86r0x_gdc_geom {
+ uint32_t gctr;
+ uint32_t pad00[15];
+ uint32_t gmdr0;
+ uint32_t gmdr1;
+ uint32_t gmdr2;
+ uint32_t pad01[237];
+ uint32_t dfifog;
+ uint32_t pad02[767];
+};
+
+/* mb86r0x gdc */
+struct mb86r0x_gdc {
+ uint32_t pad00[2];
+ uint32_t lts;
+ uint32_t pad01;
+ uint32_t lsta;
+ uint32_t pad02[3];
+ uint32_t ist;
+ uint32_t imask;
+ uint32_t pad03[6];
+ uint32_t lsa;
+ uint32_t lco;
+ uint32_t lreq;
+
+ uint32_t pad04[16*1024 - 19];
+ struct mb86r0x_gdc_dsp dsp0;
+ struct mb86r0x_gdc_dsp dsp1;
+ uint32_t pad05[4*1024 - 2];
+ uint32_t vccc;
+ uint32_t vcsr;
+ struct mb86r0x_gdc_cap cap0;
+ struct mb86r0x_gdc_cap cap1;
+ uint32_t pad06[4*1024];
+ uint32_t texture_base[16*1024];
+ struct mb86r0x_gdc_draw draw;
+ uint32_t pad07[7*1024];
+ struct mb86r0x_gdc_geom geom;
+ uint32_t pad08[7*1024];
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Physical Address Defines
+ */
+#define MB86R0x_DDR2_BASE 0xf3000000
+#define MB86R0x_GDC_BASE 0xf1fc0000
+#define MB86R0x_CCNT_BASE 0xfff42000
+#define MB86R0x_CAN0_BASE 0xfff54000
+#define MB86R0x_CAN1_BASE 0xfff55000
+#define MB86R0x_I2C0_BASE 0xfff56000
+#define MB86R0x_I2C1_BASE 0xfff57000
+#define MB86R0x_EHCI_BASE 0xfff80000
+#define MB86R0x_OHCI_BASE 0xfff81000
+#define MB86R0x_IRC1_BASE 0xfffb0000
+#define MB86R0x_MEMC_BASE 0xfffc0000
+#define MB86R0x_TIMER_BASE 0xfffe0000
+#define MB86R0x_UART0_BASE 0xfffe1000
+#define MB86R0x_UART1_BASE 0xfffe2000
+#define MB86R0x_IRCE_BASE 0xfffe4000
+#define MB86R0x_CRG_BASE 0xfffe7000
+#define MB86R0x_IRC0_BASE 0xfffe8000
+#define MB86R0x_GPIO_BASE 0xfffe9000
+#define MB86R0x_PWM0_BASE 0xfff41000
+#define MB86R0x_PWM1_BASE 0xfff41100
+
+#define MB86R0x_CRSR_SWRSTREQ (1 << 1)
+
+/*
+ * Timer register bits
+ */
+#define MB86R0x_TIMER_ENABLE (1 << 7)
+#define MB86R0x_TIMER_MODE_MSK (1 << 6)
+#define MB86R0x_TIMER_MODE_FR (0 << 6)
+#define MB86R0x_TIMER_MODE_PD (1 << 6)
+
+#define MB86R0x_TIMER_INT_EN (1 << 5)
+#define MB86R0x_TIMER_PRS_MSK (3 << 2)
+#define MB86R0x_TIMER_PRS_4S (1 << 2)
+#define MB86R0x_TIMER_PRS_8S (1 << 3)
+#define MB86R0x_TIMER_SIZE_32 (1 << 1)
+#define MB86R0x_TIMER_ONE_SHT (1 << 0)
+
+/*
+ * Clock reset generator bits
+ */
+#define MB86R0x_CRG_CRPR_PLLRDY (1 << 8)
+#define MB86R0x_CRG_CRPR_PLLMODE (0x1f << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X49 (0 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X46 (1 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X37 (2 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X20 (3 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X47 (4 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X44 (5 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X36 (6 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X19 (7 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X39 (8 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X38 (9 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X30 (10 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X15 (11 << 0)
+/*
+ * DDR2 controller bits
+ */
+#define MB86R0x_DDR2_DRCI_DRINI (1 << 15)
+#define MB86R0x_DDR2_DRCI_CKEN (1 << 14)
+#define MB86R0x_DDR2_DRCI_DRCMD (1 << 0)
+#define MB86R0x_DDR2_DRCI_CMD (MB86R0x_DDR2_DRCI_DRINI | \
+ MB86R0x_DDR2_DRCI_CKEN | \
+ MB86R0x_DDR2_DRCI_DRCMD)
+#define MB86R0x_DDR2_DRCI_INIT (MB86R0x_DDR2_DRCI_DRINI | \
+ MB86R0x_DDR2_DRCI_CKEN)
+#define MB86R0x_DDR2_DRCI_NORMAL MB86R0x_DDR2_DRCI_CKEN
+#endif /* MB86R0X_H */
diff --git a/arch/arm/include/asm/arch-omap3/clocks.h b/arch/arm/include/asm/arch-omap3/clocks.h
index 71a0cb6ae49..40f80baf61c 100644
--- a/arch/arm/include/asm/arch-omap3/clocks.h
+++ b/arch/arm/include/asm/arch-omap3/clocks.h
@@ -51,12 +51,29 @@ typedef struct {
unsigned int m2;
} dpll_param;
+struct dpll_per_36x_param {
+ unsigned int sys_clk;
+ unsigned int m;
+ unsigned int n;
+ unsigned int m2;
+ unsigned int m3;
+ unsigned int m4;
+ unsigned int m5;
+ unsigned int m6;
+ unsigned int m2div;
+};
+
/* Following functions are exported from lowlevel_init.S */
extern dpll_param *get_mpu_dpll_param(void);
extern dpll_param *get_iva_dpll_param(void);
extern dpll_param *get_core_dpll_param(void);
extern dpll_param *get_per_dpll_param(void);
+extern dpll_param *get_36x_mpu_dpll_param(void);
+extern dpll_param *get_36x_iva_dpll_param(void);
+extern dpll_param *get_36x_core_dpll_param(void);
+extern dpll_param *get_36x_per_dpll_param(void);
+
extern void *_end_vect, *_start;
#endif
diff --git a/arch/arm/include/asm/arch-omap3/clocks_omap3.h b/arch/arm/include/asm/arch-omap3/clocks_omap3.h
index 661407b564e..30ef690fa2a 100644
--- a/arch/arm/include/asm/arch-omap3/clocks_omap3.h
+++ b/arch/arm/include/asm/arch-omap3/clocks_omap3.h
@@ -282,4 +282,31 @@
#define PER_FSEL_38P4 0x07
#define PER_M2_38P4 0x09
+/* 36XX PER DPLL */
+
+#define PER_36XX_M_12 0x1B0
+#define PER_36XX_N_12 0x05
+#define PER_36XX_FSEL_12 0x07
+#define PER_36XX_M2_12 0x09
+
+#define PER_36XX_M_13 0x360
+#define PER_36XX_N_13 0x0C
+#define PER_36XX_FSEL_13 0x03
+#define PER_36XX_M2_13 0x09
+
+#define PER_36XX_M_19P2 0x1C2
+#define PER_36XX_N_19P2 0x09
+#define PER_36XX_FSEL_19P2 0x07
+#define PER_36XX_M2_19P2 0x09
+
+#define PER_36XX_M_26 0x1B0
+#define PER_36XX_N_26 0x0C
+#define PER_36XX_FSEL_26 0x07
+#define PER_36XX_M2_26 0x09
+
+#define PER_36XX_M_38P4 0x1C2
+#define PER_36XX_N_38P4 0x13
+#define PER_36XX_FSEL_38P4 0x07
+#define PER_36XX_M2_38P4 0x09
+
#endif /* endif _CLOCKS_OMAP3_H_ */
diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h
index 390b0079451..962d6d40aa8 100644
--- a/arch/arm/include/asm/arch-omap3/cpu.h
+++ b/arch/arm/include/asm/arch-omap3/cpu.h
@@ -60,19 +60,14 @@ struct ctrl {
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL_STRICT_NAMES */
-/* cpu type */
-#define OMAP3503 0x5c00
-#define OMAP3515 0x1c00
-#define OMAP3525 0x4c00
-#define OMAP3530 0x0c00
-
#ifndef __KERNEL_STRICT_NAMES
#ifndef __ASSEMBLY__
struct ctrl_id {
u8 res1[0x4];
u32 idcode; /* 0x04 */
u32 prod_id; /* 0x08 */
- u8 res2[0x0C];
+ u32 sku_id; /* 0x0c */
+ u8 res2[0x08];
u32 die_id_0; /* 0x18 */
u32 die_id_1; /* 0x1C */
u32 die_id_2; /* 0x20 */
@@ -89,6 +84,11 @@ struct ctrl_id {
#define HS_DEVICE 0x2
#define GP_DEVICE 0x3
+/* device speed */
+#define SKUID_CLK_MASK 0xf
+#define SKUID_CLK_600MHZ 0x0
+#define SKUID_CLK_720MHZ 0x8
+
#define GPMC_BASE (OMAP34XX_GPMC_BASE)
#define GPMC_CONFIG_CS0 0x60
#define GPMC_CONFIG_CS0_BASE (GPMC_BASE + GPMC_CONFIG_CS0)
@@ -419,6 +419,7 @@ struct prm {
};
#else /* __ASSEMBLY__ */
#define PRM_RSTCTRL 0x48307250
+#define PRM_RSTCTRL_RESET 0x04
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL_STRICT_NAMES */
diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
index 12815f694f4..3957c796f22 100644
--- a/arch/arm/include/asm/arch-omap3/omap3.h
+++ b/arch/arm/include/asm/arch-omap3/omap3.h
@@ -176,11 +176,41 @@ struct gpio {
#define CPU_3XX_ES21 2
#define CPU_3XX_ES30 3
#define CPU_3XX_ES31 4
-#define CPU_3XX_MAX_REV (CPU_3XX_ES31 + 1)
+#define CPU_3XX_ES312 7
+#define CPU_3XX_MAX_REV 8
#define CPU_3XX_ID_SHIFT 28
#define WIDTH_8BIT 0x0000
#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
+/*
+ * Hawkeye values
+ */
+#define HAWKEYE_OMAP34XX 0xb7ae
+#define HAWKEYE_AM35XX 0xb868
+#define HAWKEYE_OMAP36XX 0xb891
+
+#define HAWKEYE_SHIFT 12
+
+/*
+ * Define CPU families
+ */
+#define CPU_OMAP34XX 0x3400 /* OMAP34xx/OMAP35 devices */
+#define CPU_AM35XX 0x3500 /* AM35xx devices */
+#define CPU_OMAP36XX 0x3600 /* OMAP36xx devices */
+
+/*
+ * Control status register values corresponding to cpu variants
+ */
+#define OMAP3503 0x5c00
+#define OMAP3515 0x1c00
+#define OMAP3525 0x4c00
+#define OMAP3530 0x0c00
+
+#define AM3505 0x5c00
+#define AM3517 0x1c00
+
+#define OMAP3730 0x0c00
+
#endif
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index db7b42aed10..4a28ba1c4ae 100644
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -41,7 +41,9 @@ void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
void watchdog_init(void);
void set_muxconf_regs(void);
+u32 get_cpu_family(void);
u32 get_cpu_rev(void);
+u32 get_sku_id(void);
u32 get_mem_type(void);
u32 get_sysboot_value(void);
u32 is_gpmc_muxed(void);
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index 79ff22cf316..d0c808d1217 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -88,6 +88,7 @@
#define PRM_DEVICE_BASE (PRM_BASE + 0x1B00)
#define PRM_RSTCTRL PRM_DEVICE_BASE
+#define PRM_RSTCTRL_RESET 0x01
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index ad0c640dfd8..4813e9e21d9 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -33,6 +33,9 @@ void watchdog_init(void);
u32 get_device_type(void);
void invalidate_dcache(u32);
void set_muxconf_regs(void);
+void sr32(void *, u32, u32, u32);
+u32 wait_on_value(u32, u32, void *, u32);
+void sdelay(unsigned long);
extern const struct omap_sysinfo sysinfo;
diff --git a/arch/arm/include/asm/arch-orion5x/cpu.h b/arch/arm/include/asm/arch-orion5x/cpu.h
index 80717f8a579..6ce02a92125 100644
--- a/arch/arm/include/asm/arch-orion5x/cpu.h
+++ b/arch/arm/include/asm/arch-orion5x/cpu.h
@@ -76,7 +76,7 @@ enum orion5x_cpu_attrib {
/*
* Device Address MAP BAR values
-/*
+ *
* All addresses and sizes not defined by board code
* will be given default values here.
*/
diff --git a/arch/arm/include/asm/arch-s5pc1xx/clk.h b/arch/arm/include/asm/arch-s5pc1xx/clk.h
index 3e59abe78c6..3488eb7c157 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/clk.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/clk.h
@@ -29,10 +29,11 @@
#define HPLL 3
#define VPLL 4
-void s5pc1xx_clock_init(void);
+void s5p_clock_init(void);
extern unsigned long (*get_pll_clk)(int pllreg);
extern unsigned long (*get_arm_clk)(void);
-extern unsigned long (*get_pclk)(void);
+extern unsigned long (*get_pwm_clk)(void);
+extern unsigned long (*get_uart_clk)(int dev_index);
#endif
diff --git a/arch/arm/include/asm/arch-s5pc1xx/cpu.h b/arch/arm/include/asm/arch-s5pc1xx/cpu.h
index b3af8cc782a..e74959fe222 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/cpu.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/cpu.h
@@ -25,9 +25,9 @@
#define S5PC1XX_ADDR_BASE 0xE0000000
-#define S5PC1XX_CLOCK_BASE 0xE0100000
-
/* S5PC100 */
+#define S5PC100_PRO_ID 0xE0000000
+#define S5PC100_CLOCK_BASE 0xE0100000
#define S5PC100_GPIO_BASE 0xE0300000
#define S5PC100_VIC0_BASE 0xE4000000
#define S5PC100_VIC1_BASE 0xE4100000
@@ -41,6 +41,8 @@
#define S5PC100_MMC_BASE 0xED800000
/* S5PC110 */
+#define S5PC110_PRO_ID 0xE0000000
+#define S5PC110_CLOCK_BASE 0xE0100000
#define S5PC110_GPIO_BASE 0xE0200000
#define S5PC110_PWMTIMER_BASE 0xE2500000
#define S5PC110_WATCHDOG_BASE 0xE2700000
@@ -54,21 +56,44 @@
#define S5PC110_VIC2_BASE 0xF2200000
#define S5PC110_VIC3_BASE 0xF2300000
-/* Chip ID */
-#define S5PC1XX_PRO_ID 0xE0000000
-
#ifndef __ASSEMBLY__
+#include <asm/io.h>
/* CPU detection macros */
-extern unsigned int s5pc1xx_cpu_id;
+extern unsigned int s5p_cpu_id;
+
+static inline void s5p_set_cpu_id(void)
+{
+ s5p_cpu_id = readl(S5PC100_PRO_ID);
+ s5p_cpu_id = 0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12);
+}
#define IS_SAMSUNG_TYPE(type, id) \
static inline int cpu_is_##type(void) \
{ \
- return s5pc1xx_cpu_id == id ? 1 : 0; \
+ return s5p_cpu_id == id ? 1 : 0; \
}
IS_SAMSUNG_TYPE(s5pc100, 0xc100)
IS_SAMSUNG_TYPE(s5pc110, 0xc110)
+
+#define SAMSUNG_BASE(device, base) \
+static inline unsigned int samsung_get_base_##device(void) \
+{ \
+ if (cpu_is_s5pc100()) \
+ return S5PC100_##base; \
+ else if (cpu_is_s5pc110()) \
+ return S5PC110_##base; \
+ else \
+ return 0; \
+}
+
+SAMSUNG_BASE(clock, CLOCK_BASE)
+SAMSUNG_BASE(gpio, GPIO_BASE)
+SAMSUNG_BASE(pro_id, PRO_ID)
+SAMSUNG_BASE(mmc, MMC_BASE)
+SAMSUNG_BASE(sromc, SROMC_BASE)
+SAMSUNG_BASE(timer, PWMTIMER_BASE)
+SAMSUNG_BASE(uart, UART_BASE)
#endif
#endif /* _S5PC1XX_CPU_H */
diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
index 9a7faed319e..2df33a607c0 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
@@ -33,96 +33,96 @@ struct s5p_gpio_bank {
};
struct s5pc100_gpio {
- struct s5p_gpio_bank gpio_a0;
- struct s5p_gpio_bank gpio_a1;
- struct s5p_gpio_bank gpio_b;
- struct s5p_gpio_bank gpio_c;
- struct s5p_gpio_bank gpio_d;
- struct s5p_gpio_bank gpio_e0;
- struct s5p_gpio_bank gpio_e1;
- struct s5p_gpio_bank gpio_f0;
- struct s5p_gpio_bank gpio_f1;
- struct s5p_gpio_bank gpio_f2;
- struct s5p_gpio_bank gpio_f3;
- struct s5p_gpio_bank gpio_g0;
- struct s5p_gpio_bank gpio_g1;
- struct s5p_gpio_bank gpio_g2;
- struct s5p_gpio_bank gpio_g3;
- struct s5p_gpio_bank gpio_i;
- struct s5p_gpio_bank gpio_j0;
- struct s5p_gpio_bank gpio_j1;
- struct s5p_gpio_bank gpio_j2;
- struct s5p_gpio_bank gpio_j3;
- struct s5p_gpio_bank gpio_j4;
- struct s5p_gpio_bank gpio_k0;
- struct s5p_gpio_bank gpio_k1;
- struct s5p_gpio_bank gpio_k2;
- struct s5p_gpio_bank gpio_k3;
- struct s5p_gpio_bank gpio_l0;
- struct s5p_gpio_bank gpio_l1;
- struct s5p_gpio_bank gpio_l2;
- struct s5p_gpio_bank gpio_l3;
- struct s5p_gpio_bank gpio_l4;
- struct s5p_gpio_bank gpio_h0;
- struct s5p_gpio_bank gpio_h1;
- struct s5p_gpio_bank gpio_h2;
- struct s5p_gpio_bank gpio_h3;
+ struct s5p_gpio_bank a0;
+ struct s5p_gpio_bank a1;
+ struct s5p_gpio_bank b;
+ struct s5p_gpio_bank c;
+ struct s5p_gpio_bank d;
+ struct s5p_gpio_bank e0;
+ struct s5p_gpio_bank e1;
+ struct s5p_gpio_bank f0;
+ struct s5p_gpio_bank f1;
+ struct s5p_gpio_bank f2;
+ struct s5p_gpio_bank f3;
+ struct s5p_gpio_bank g0;
+ struct s5p_gpio_bank g1;
+ struct s5p_gpio_bank g2;
+ struct s5p_gpio_bank g3;
+ struct s5p_gpio_bank i;
+ struct s5p_gpio_bank j0;
+ struct s5p_gpio_bank j1;
+ struct s5p_gpio_bank j2;
+ struct s5p_gpio_bank j3;
+ struct s5p_gpio_bank j4;
+ struct s5p_gpio_bank k0;
+ struct s5p_gpio_bank k1;
+ struct s5p_gpio_bank k2;
+ struct s5p_gpio_bank k3;
+ struct s5p_gpio_bank l0;
+ struct s5p_gpio_bank l1;
+ struct s5p_gpio_bank l2;
+ struct s5p_gpio_bank l3;
+ struct s5p_gpio_bank l4;
+ struct s5p_gpio_bank h0;
+ struct s5p_gpio_bank h1;
+ struct s5p_gpio_bank h2;
+ struct s5p_gpio_bank h3;
};
struct s5pc110_gpio {
- struct s5p_gpio_bank gpio_a0;
- struct s5p_gpio_bank gpio_a1;
- struct s5p_gpio_bank gpio_b;
- struct s5p_gpio_bank gpio_c0;
- struct s5p_gpio_bank gpio_c1;
- struct s5p_gpio_bank gpio_d0;
- struct s5p_gpio_bank gpio_d1;
- struct s5p_gpio_bank gpio_e0;
- struct s5p_gpio_bank gpio_e1;
- struct s5p_gpio_bank gpio_f0;
- struct s5p_gpio_bank gpio_f1;
- struct s5p_gpio_bank gpio_f2;
- struct s5p_gpio_bank gpio_f3;
- struct s5p_gpio_bank gpio_g0;
- struct s5p_gpio_bank gpio_g1;
- struct s5p_gpio_bank gpio_g2;
- struct s5p_gpio_bank gpio_g3;
- struct s5p_gpio_bank gpio_i;
- struct s5p_gpio_bank gpio_j0;
- struct s5p_gpio_bank gpio_j1;
- struct s5p_gpio_bank gpio_j2;
- struct s5p_gpio_bank gpio_j3;
- struct s5p_gpio_bank gpio_j4;
- struct s5p_gpio_bank gpio_mp0_1;
- struct s5p_gpio_bank gpio_mp0_2;
- struct s5p_gpio_bank gpio_mp0_3;
- struct s5p_gpio_bank gpio_mp0_4;
- struct s5p_gpio_bank gpio_mp0_5;
- struct s5p_gpio_bank gpio_mp0_6;
- struct s5p_gpio_bank gpio_mp0_7;
- struct s5p_gpio_bank gpio_mp1_0;
- struct s5p_gpio_bank gpio_mp1_1;
- struct s5p_gpio_bank gpio_mp1_2;
- struct s5p_gpio_bank gpio_mp1_3;
- struct s5p_gpio_bank gpio_mp1_4;
- struct s5p_gpio_bank gpio_mp1_5;
- struct s5p_gpio_bank gpio_mp1_6;
- struct s5p_gpio_bank gpio_mp1_7;
- struct s5p_gpio_bank gpio_mp1_8;
- struct s5p_gpio_bank gpio_mp2_0;
- struct s5p_gpio_bank gpio_mp2_1;
- struct s5p_gpio_bank gpio_mp2_2;
- struct s5p_gpio_bank gpio_mp2_3;
- struct s5p_gpio_bank gpio_mp2_4;
- struct s5p_gpio_bank gpio_mp2_5;
- struct s5p_gpio_bank gpio_mp2_6;
- struct s5p_gpio_bank gpio_mp2_7;
- struct s5p_gpio_bank gpio_mp2_8;
+ struct s5p_gpio_bank a0;
+ struct s5p_gpio_bank a1;
+ struct s5p_gpio_bank b;
+ struct s5p_gpio_bank c0;
+ struct s5p_gpio_bank c1;
+ struct s5p_gpio_bank d0;
+ struct s5p_gpio_bank d1;
+ struct s5p_gpio_bank e0;
+ struct s5p_gpio_bank e1;
+ struct s5p_gpio_bank f0;
+ struct s5p_gpio_bank f1;
+ struct s5p_gpio_bank f2;
+ struct s5p_gpio_bank f3;
+ struct s5p_gpio_bank g0;
+ struct s5p_gpio_bank g1;
+ struct s5p_gpio_bank g2;
+ struct s5p_gpio_bank g3;
+ struct s5p_gpio_bank i;
+ struct s5p_gpio_bank j0;
+ struct s5p_gpio_bank j1;
+ struct s5p_gpio_bank j2;
+ struct s5p_gpio_bank j3;
+ struct s5p_gpio_bank j4;
+ struct s5p_gpio_bank mp0_1;
+ struct s5p_gpio_bank mp0_2;
+ struct s5p_gpio_bank mp0_3;
+ struct s5p_gpio_bank mp0_4;
+ struct s5p_gpio_bank mp0_5;
+ struct s5p_gpio_bank mp0_6;
+ struct s5p_gpio_bank mp0_7;
+ struct s5p_gpio_bank mp1_0;
+ struct s5p_gpio_bank mp1_1;
+ struct s5p_gpio_bank mp1_2;
+ struct s5p_gpio_bank mp1_3;
+ struct s5p_gpio_bank mp1_4;
+ struct s5p_gpio_bank mp1_5;
+ struct s5p_gpio_bank mp1_6;
+ struct s5p_gpio_bank mp1_7;
+ struct s5p_gpio_bank mp1_8;
+ struct s5p_gpio_bank mp2_0;
+ struct s5p_gpio_bank mp2_1;
+ struct s5p_gpio_bank mp2_2;
+ struct s5p_gpio_bank mp2_3;
+ struct s5p_gpio_bank mp2_4;
+ struct s5p_gpio_bank mp2_5;
+ struct s5p_gpio_bank mp2_6;
+ struct s5p_gpio_bank mp2_7;
+ struct s5p_gpio_bank mp2_8;
struct s5p_gpio_bank res1[48];
- struct s5p_gpio_bank gpio_h0;
- struct s5p_gpio_bank gpio_h1;
- struct s5p_gpio_bank gpio_h2;
- struct s5p_gpio_bank gpio_h3;
+ struct s5p_gpio_bank h0;
+ struct s5p_gpio_bank h1;
+ struct s5p_gpio_bank h2;
+ struct s5p_gpio_bank h3;
};
/* functions */
diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h
index ac560c27046..68c59d13e34 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/mmc.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h
@@ -56,7 +56,7 @@ struct s5p_mmc {
unsigned int control4;
unsigned char res4[0x6e];
unsigned short hcver;
- unsigned char res5[0xFFF00];
+ unsigned char res5[0xFFF02];
};
struct mmc_host {
diff --git a/arch/arm/include/asm/arch-s5pc1xx/pwm.h b/arch/arm/include/asm/arch-s5pc1xx/pwm.h
index e02a8d8fb3a..0369968d4a9 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/pwm.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/pwm.h
@@ -22,19 +22,15 @@
#ifndef __ASM_ARM_ARCH_PWM_H_
#define __ASM_ARM_ARCH_PWM_H_
-/* PWM timer addressing */
-#define S5PC100_TIMER_BASE S5PC100_PWMTIMER_BASE
-#define S5PC110_TIMER_BASE S5PC110_PWMTIMER_BASE
-
/* Interval mode(Auto Reload) of PWM Timer 4 */
-#define S5PC1XX_TCON4_AUTO_RELOAD (1 << 22)
+#define TCON4_AUTO_RELOAD (1 << 22)
/* Update TCNTB4 */
-#define S5PC1XX_TCON4_UPDATE (1 << 21)
+#define TCON4_UPDATE (1 << 21)
/* start bit of PWM Timer 4 */
-#define S5PC1XX_TCON4_START (1 << 20)
+#define TCON4_START (1 << 20)
#ifndef __ASSEMBLY__
-struct s5pc1xx_timer {
+struct s5p_timer {
unsigned int tcfg0;
unsigned int tcfg1;
unsigned int tcon;
diff --git a/arch/avr32/cpu/at32ap700x/Makefile b/arch/avr32/cpu/at32ap700x/Makefile
index 46e6ef661a4..30ea92590dc 100644
--- a/arch/avr32/cpu/at32ap700x/Makefile
+++ b/arch/avr32/cpu/at32ap700x/Makefile
@@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)lib$(SOC).a
-COBJS := portmux.o clk.o
+COBJS := portmux.o clk.o mmu.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/avr32/cpu/at32ap700x/mmu.c b/arch/avr32/cpu/at32ap700x/mmu.c
new file mode 100644
index 00000000000..c3a1b93679d
--- /dev/null
+++ b/arch/avr32/cpu/at32ap700x/mmu.c
@@ -0,0 +1,78 @@
+#include <common.h>
+#include <asm/arch/mmu.h>
+#include <asm/sysreg.h>
+
+void mmu_init_r(unsigned long dest_addr)
+{
+ uintptr_t vmr_table_addr;
+
+ /* Round monitor address down to the nearest page boundary */
+ dest_addr &= PAGE_ADDR_MASK;
+
+ /* Initialize TLB entry 0 to cover the monitor, and lock it */
+ sysreg_write(TLBEHI, dest_addr | SYSREG_BIT(TLBEHI_V));
+ sysreg_write(TLBELO, dest_addr | MMU_VMR_CACHE_WRBACK);
+ sysreg_write(MMUCR, SYSREG_BF(DRP, 0) | SYSREG_BF(DLA, 1)
+ | SYSREG_BIT(MMUCR_S) | SYSREG_BIT(M));
+ __builtin_tlbw();
+
+ /*
+ * Calculate the address of the VM range table in a PC-relative
+ * manner to make sure we hit the SDRAM and not the flash.
+ */
+ vmr_table_addr = (uintptr_t)&mmu_vmr_table;
+ sysreg_write(PTBR, vmr_table_addr);
+ printf("VMR table @ 0x%08x\n", vmr_table_addr);
+
+ /* Enable paging */
+ sysreg_write(MMUCR, SYSREG_BF(DRP, 1) | SYSREG_BF(DLA, 1)
+ | SYSREG_BIT(MMUCR_S) | SYSREG_BIT(M) | SYSREG_BIT(E));
+}
+
+int mmu_handle_tlb_miss(void)
+{
+ const struct mmu_vm_range *vmr_table;
+ const struct mmu_vm_range *vmr;
+ unsigned int fault_pgno;
+ int first, last;
+
+ fault_pgno = sysreg_read(TLBEAR) >> PAGE_SHIFT;
+ vmr_table = (const struct mmu_vm_range *)sysreg_read(PTBR);
+
+ /* Do a binary search through the VM ranges */
+ first = 0;
+ last = CONFIG_SYS_NR_VM_REGIONS;
+ while (first < last) {
+ unsigned int start;
+ int middle;
+
+ /* Pick the entry in the middle of the remaining range */
+ middle = (first + last) >> 1;
+ vmr = &vmr_table[middle];
+ start = vmr->virt_pgno;
+
+ /* Do the bisection thing */
+ if (fault_pgno < start) {
+ last = middle;
+ } else if (fault_pgno >= (start + vmr->nr_pages)) {
+ first = middle + 1;
+ } else {
+ /* Got it; let's slam it into the TLB */
+ uint32_t tlbelo;
+
+ tlbelo = vmr->phys & ~PAGE_ADDR_MASK;
+ tlbelo |= fault_pgno << PAGE_SHIFT;
+ sysreg_write(TLBELO, tlbelo);
+ __builtin_tlbw();
+
+ /* Zero means success */
+ return 0;
+ }
+ }
+
+ /*
+ * Didn't find any matching entries. Return a nonzero value to
+ * indicate that this should be treated as a fatal exception.
+ */
+ return -1;
+}
diff --git a/arch/avr32/cpu/exception.c b/arch/avr32/cpu/exception.c
index dc9c3002a49..b21ef1f928d 100644
--- a/arch/avr32/cpu/exception.c
+++ b/arch/avr32/cpu/exception.c
@@ -59,7 +59,8 @@ void do_unknown_exception(unsigned int ecr, struct pt_regs *regs)
{
unsigned int mode;
- printf("\n *** Unhandled exception %u at PC=0x%08lx\n", ecr, regs->pc);
+ printf("\n *** Unhandled exception %u at PC=0x%08lx [%08lx]\n",
+ ecr, regs->pc, regs->pc - gd->reloc_off);
switch (ecr) {
case ECR_BUS_ERROR_WRITE:
diff --git a/arch/avr32/cpu/start.S b/arch/avr32/cpu/start.S
index 99c9e06cb83..06bf4c692d8 100644
--- a/arch/avr32/cpu/start.S
+++ b/arch/avr32/cpu/start.S
@@ -82,12 +82,19 @@ _evba:
.org 0x44
rjmp unknown_exception /* DTLB Modified */
- .org 0x50
- rjmp unknown_exception /* ITLB Miss */
- .org 0x60
- rjmp unknown_exception /* DTLB Miss (read) */
- .org 0x70
- rjmp unknown_exception /* DTLB Miss (write) */
+ .org 0x50 /* ITLB Miss */
+ pushm r8-r12,lr
+ rjmp 1f
+ .org 0x60 /* DTLB Miss (read) */
+ pushm r8-r12,lr
+ rjmp 1f
+ .org 0x70 /* DTLB Miss (write) */
+ pushm r8-r12,lr
+1: mov r12, sp
+ rcall mmu_handle_tlb_miss
+ popm r8-r12,lr
+ brne unknown_exception
+ rete
.size _evba, . - _evba
diff --git a/arch/avr32/include/asm/arch-at32ap700x/addrspace.h b/arch/avr32/include/asm/arch-at32ap700x/addrspace.h
index 409eee35363..4edc1bd7017 100644
--- a/arch/avr32/include/asm/arch-at32ap700x/addrspace.h
+++ b/arch/avr32/include/asm/arch-at32ap700x/addrspace.h
@@ -75,10 +75,7 @@ static inline void * phys_to_virt(unsigned long address)
static inline void *
map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
{
- if (flags == MAP_WRBACK)
- return (void *)P1SEGADDR(paddr);
- else
- return (void *)P2SEGADDR(paddr);
+ return (void *)paddr;
}
#endif /* __ASM_AVR32_ADDRSPACE_H */
diff --git a/arch/avr32/include/asm/arch-at32ap700x/mmu.h b/arch/avr32/include/asm/arch-at32ap700x/mmu.h
new file mode 100644
index 00000000000..fcd9a056092
--- /dev/null
+++ b/arch/avr32/include/asm/arch-at32ap700x/mmu.h
@@ -0,0 +1,66 @@
+/*
+ * In order to deal with the hardcoded u-boot requirement that virtual
+ * addresses are always mapped 1:1 with physical addresses, we implement
+ * a small virtual memory manager so that we can use the MMU hardware in
+ * order to get the caching properties right.
+ *
+ * A few pages (or possibly just one) are locked in the TLB permanently
+ * in order to avoid recursive TLB misses, but most pages are faulted in
+ * on demand.
+ */
+#ifndef __ASM_ARCH_MMU_H
+#define __ASM_ARCH_MMU_H
+
+#include <asm/sysreg.h>
+
+#define PAGE_SHIFT 20
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_ADDR_MASK (~(PAGE_SIZE - 1))
+
+#define MMU_VMR_CACHE_NONE \
+ (SYSREG_BF(AP, 3) | SYSREG_BF(SZ, 3) | SYSREG_BIT(TLBELO_D))
+#define MMU_VMR_CACHE_WBUF \
+ (MMU_VMR_CACHE_NONE | SYSREG_BIT(B))
+#define MMU_VMR_CACHE_WRTHRU \
+ (MMU_VMR_CACHE_NONE | SYSREG_BIT(TLBELO_C) | SYSREG_BIT(W))
+#define MMU_VMR_CACHE_WRBACK \
+ (MMU_VMR_CACHE_WBUF | SYSREG_BIT(TLBELO_C))
+
+/*
+ * This structure is used in our "page table". Instead of the usual
+ * x86-inspired radix tree, we let each entry cover an arbitrary-sized
+ * virtual address range and store them in a binary search tree. This is
+ * somewhat slower, but should use significantly less RAM, and we
+ * shouldn't get many TLB misses when using 1 MB pages anyway.
+ *
+ * With 1 MB pages, we need 12 bits to store the page number. In
+ * addition, we stick an Invalid bit in the high bit of virt_pgno (if
+ * set, it cannot possibly match any faulting page), and all the bits
+ * that need to be written to TLBELO in phys_pgno.
+ */
+struct mmu_vm_range {
+ uint16_t virt_pgno;
+ uint16_t nr_pages;
+ uint32_t phys;
+};
+
+/*
+ * An array of mmu_vm_range objects describing all pageable addresses.
+ * The array is sorted by virt_pgno so that the TLB miss exception
+ * handler can do a binary search to find the correct entry.
+ */
+extern struct mmu_vm_range mmu_vmr_table[];
+
+/*
+ * Initialize the MMU. This will set up a fixed TLB entry for the static
+ * u-boot image at dest_addr and enable paging.
+ */
+void mmu_init_r(unsigned long dest_addr);
+
+/*
+ * Handle a TLB miss exception. This function is called directly from
+ * the exception vector table written in assembly.
+ */
+int mmu_handle_tlb_miss(void);
+
+#endif /* __ASM_ARCH_MMU_H */
diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c
index 9e741d22e2c..aa589bb4b00 100644
--- a/arch/avr32/lib/board.c
+++ b/arch/avr32/lib/board.c
@@ -33,6 +33,7 @@
#include <asm/initcalls.h>
#include <asm/sections.h>
+#include <asm/arch/mmu.h>
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING ""
@@ -265,6 +266,9 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
gd->flags |= GD_FLG_RELOC;
gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
+ /* Enable the MMU so that we can keep u-boot simple */
+ mmu_init_r(dest_addr);
+
board_early_init_r();
monitor_flash_len = _edata - _text;
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 004d8daa900..49bc03e3ec1 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -26,11 +26,26 @@
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/hmatrix.h>
+#include <asm/arch/mmu.h>
#include <asm/arch/portmux.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
+struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
+ {
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_NONE,
+ }, {
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_WRBACK,
+ },
+};
+
static const struct sdram_config sdram_config = {
.data_bits = SDRAM_DATA_16BIT,
.row_bits = 13,
@@ -75,13 +90,11 @@ phys_size_t initdram(int board_type)
unsigned long actual_size;
void *sdram_base;
- sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+ sdram_base = uncached(EBI_SDRAM_BASE);
expected_size = sdram_init(sdram_base, &sdram_config);
actual_size = get_ram_size(sdram_base, expected_size);
- unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
-
if (expected_size != actual_size)
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index c36cb5717be..8b1e1b57d78 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -25,11 +25,26 @@
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/hmatrix.h>
+#include <asm/arch/mmu.h>
#include <asm/arch/portmux.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
+struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
+ {
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_NONE,
+ }, {
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_WRBACK,
+ },
+};
+
static const struct sdram_config sdram_config = {
#if defined(CONFIG_ATSTK1006)
/* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */
@@ -97,13 +112,11 @@ phys_size_t initdram(int board_type)
unsigned long actual_size;
void *sdram_base;
- sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+ sdram_base = uncached(EBI_SDRAM_BASE);
expected_size = sdram_init(sdram_base, &sdram_config);
actual_size = get_ram_size(sdram_base, expected_size);
- unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
-
if (expected_size != actual_size)
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
diff --git a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
index 8af680fe914..b0eca939b7f 100644
--- a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
+++ b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
@@ -24,10 +24,25 @@
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/hmatrix.h>
+#include <asm/arch/mmu.h>
#include <asm/arch/portmux.h>
DECLARE_GLOBAL_DATA_PTR;
+struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
+ {
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_NONE,
+ }, {
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_WRBACK,
+ },
+};
+
static const struct sdram_config sdram_config = {
/* MT48LC4M32B2P-6 (16 MB) */
.data_bits = SDRAM_DATA_32BIT,
@@ -68,13 +83,11 @@ phys_size_t initdram(int board_type)
unsigned long actual_size;
void *sdram_base;
- sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+ sdram_base = uncached(EBI_SDRAM_BASE);
expected_size = sdram_init(sdram_base, &sdram_config);
actual_size = get_ram_size(sdram_base, expected_size);
- unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
-
if (expected_size != actual_size)
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c
index 694bd743588..41fa3e1567a 100644
--- a/board/esd/meesc/meesc.c
+++ b/board/esd/meesc/meesc.c
@@ -3,7 +3,7 @@
* Stelian Pop <stelian.pop@leadtechdesign.com>
* Lead Tech Design <www.leadtechdesign.com>
*
- * (C) Copyright 2009
+ * (C) Copyright 2009-2010
* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
* esd electronic system design gmbh <www.esd.eu>
*
@@ -28,13 +28,13 @@
#include <common.h>
#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9_matrix.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/hardware.h>
#include <asm/arch/io.h>
#include <netdev.h>
@@ -52,10 +52,10 @@ int get_hw_rev(void)
if (hw_rev >= 0)
return hw_rev;
- hw_rev = at91_get_gpio_value(AT91_PIN_PB19);
- hw_rev |= at91_get_gpio_value(AT91_PIN_PB20) << 1;
- hw_rev |= at91_get_gpio_value(AT91_PIN_PB21) << 2;
- hw_rev |= at91_get_gpio_value(AT91_PIN_PB22) << 3;
+ hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19);
+ hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1;
+ hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2;
+ hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3;
if (hw_rev == 15)
hw_rev = 0;
@@ -67,44 +67,44 @@ int get_hw_rev(void)
static void meesc_nand_hw_init(void)
{
unsigned long csa;
+ at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE;
+ at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
/* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
- at91_sys_write(AT91_MATRIX_EBI0CSA,
- csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+ csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
+ writel(csa, &matrix->csa[0]);
/* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
-#endif
- AT91_SMC_TDF_(2));
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(2),
+ &smc->cs[3].mode);
/* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
/* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif /* CONFIG_CMD_NAND */
#ifdef CONFIG_MACB
static void meesc_macb_hw_init(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
+ writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer);
at91_macb_hw_init();
}
#endif
@@ -117,26 +117,27 @@ static void meesc_macb_hw_init(void)
*/
static void meesc_ethercat_hw_init(void)
{
+ at91_smc_t *smc1 = (at91_smc_t *) AT91_SMC1_BASE;
+
/* Configure SMC EBI1_CS0 for EtherCAT */
- at91_sys_write(AT91_SMC1_SETUP(0),
- AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC1_PULSE(0),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(9) |
- AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(9));
- at91_sys_write(AT91_SMC1_CYCLE(0),
- AT91_SMC_NWECYCLE_(10) | AT91_SMC_NRDCYCLE_(5));
+ writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc1->cs[0].setup);
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) |
+ AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9),
+ &smc1->cs[0].pulse);
+ writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6),
+ &smc1->cs[0].cycle);
/*
* Configure behavior at external wait signal, byte-select mode, 16 bit
* data bus width, none data float wait states and TDF optimization
*/
- at91_sys_write(AT91_SMC1_MODE(0),
- AT91_SMC_READMODE | AT91_SMC_EXNWMODE_READY |
- AT91_SMC_BAT_SELECT | AT91_SMC_DBW_16 | AT91_SMC_TDF_(0) |
- AT91_SMC_TDFMODE);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY |
+ AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) |
+ AT91_SMC_MODE_TDF, &smc1->cs[0].mode);
/* Configure RDY/BSY */
- at91_set_B_periph(AT91_PIN_PE20, 0); /* EBI1_NWAIT */
+ at91_set_b_periph(AT91_PIO_PORTE, 20, 0); /* EBI1_NWAIT */
}
int dram_init(void)
@@ -150,7 +151,7 @@ int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00);
+ rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x00);
#endif
return rc;
}
@@ -175,7 +176,7 @@ int checkboard(void)
gd->bd->bi_arch_number = MACH_TYPE_ETHERCAN2;
puts("Board: EtherCAN/2 Gateway");
/* switch on LED1D */
- at91_set_gpio_output(AT91_PIN_PB12, 1);
+ at91_set_pio_output(AT91_PIO_PORTB, 12, 1);
break;
default:
/* assume, no ET1100 present, arch number of EtherCAN/2-Board */
@@ -222,8 +223,9 @@ u32 get_board_rev(void)
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
- char *str;
- char buf[32];
+ char *str;
+ char buf[32];
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
/*
* Normally the processor clock has a divisor of 2.
@@ -231,10 +233,9 @@ int misc_init_r(void)
* Check the user has set environment mdiv to 4 to change the divisor.
*/
if ((str = getenv("mdiv")) && (strcmp(str, "4") == 0)) {
- at91_sys_write(AT91_PMC_MCKR,
- (at91_sys_read(AT91_PMC_MCKR) & ~AT91_PMC_MDIV) |
- AT91SAM9_PMC_MDIV_4);
- at91_clock_init(0);
+ writel((readl(&pmc->mckr) & ~AT91_PMC_MDIV) |
+ AT91SAM9_PMC_MDIV_4, &pmc->mckr);
+ at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
serial_setbrg();
/* Notify the user that the clock is not default */
printf("Setting master clock to %s MHz\n",
@@ -247,10 +248,14 @@ int misc_init_r(void)
int board_init(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
/* Peripheral Clock Enable Register */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA |
- 1 << AT91SAM9263_ID_PIOB |
- 1 << AT91SAM9263_ID_PIOCDE);
+ writel(1 << AT91SAM9263_ID_PIOA |
+ 1 << AT91SAM9263_ID_PIOB |
+ 1 << AT91SAM9263_ID_PIOCDE |
+ 1 << AT91SAM9263_ID_UHP,
+ &pmc->pcer);
/* initialize ET1100 Controller */
meesc_ethercat_hw_init();
@@ -271,5 +276,8 @@ int board_init(void)
#ifdef CONFIG_AT91_CAN
at91_can_hw_init();
#endif
+#ifdef CONFIG_USB_OHCI_NEW
+ at91_uhp_hw_init();
+#endif
return 0;
}
diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c
index 0017962d420..cd4d42c6b79 100644
--- a/board/eukrea/cpuat91/cpuat91.c
+++ b/board/eukrea/cpuat91/cpuat91.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006 Eukrea Electromatique <www.eukrea.com>
+ * (C) Copyright 2006-2010 Eukrea Electromatique <www.eukrea.com>
* Eric Benard <eric@eukrea.com>
* based on at91rm9200dk.c which is :
* (C) Copyright 2002
@@ -27,13 +27,11 @@
#include <common.h>
#include <netdev.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <ks8721.h>
-#endif
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/at91_pmc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -61,31 +59,7 @@ int dram_init(void)
return 0;
}
-#if defined(CONFIG_DRIVER_ETHER)
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = ks8721_initphy;
- p_phyops->IsPhyConnected = ks8721_isphyconnected;
- p_phyops->GetLinkSpeed = ks8721_getlinkspeed;
- p_phyops->AutoNegotiate = ks8721_autonegotiate;
-}
-
-#endif /* CONFIG_CMD_NET */
-#endif /* CONFIG_DRIVER_ETHER */
#ifdef CONFIG_DRIVER_AT91EMAC
-
int board_eth_init(bd_t *bis)
{
int rc = 0;
@@ -93,3 +67,20 @@ int board_eth_init(bd_t *bis)
return rc;
}
#endif
+
+#ifdef CONFIG_SOFT_I2C
+void i2c_init_board(void)
+{
+ u32 pin;
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+
+ writel(1 << AT91_ID_PIOA, &pmc->pcer);
+ pin = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK;
+ writel(pin, &pio->pioa.idr);
+ writel(pin, &pio->pioa.pudr);
+ writel(pin, &pio->pioa.per);
+ writel(pin, &pio->pioa.oer);
+ writel(pin, &pio->pioa.sodr);
+}
+#endif
diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index cc0f1371218..470adba7948 100644
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -27,12 +27,32 @@
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/hmatrix.h>
+#include <asm/arch/mmu.h>
#include <asm/arch/portmux.h>
#include <atmel_lcdc.h>
#include <lcd.h>
#include "../../../arch/avr32/cpu/hsmc3.h"
+struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
+ {
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_NONE,
+ }, {
+ .virt_pgno = EBI_SRAM_CS2_BASE >> PAGE_SHIFT,
+ .nr_pages = EBI_SRAM_CS2_SIZE >> PAGE_SHIFT,
+ .phys = (EBI_SRAM_CS2_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_NONE,
+ }, {
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_WRBACK,
+ },
+};
+
#if defined(CONFIG_LCD)
/* 480x272x16 @ 72 Hz */
vidinfo_t panel_info = {
@@ -153,13 +173,11 @@ phys_size_t initdram(int board_type)
unsigned long actual_size;
void *sdram_base;
- sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+ sdram_base = uncached(EBI_SDRAM_BASE);
expected_size = sdram_init(sdram_base, &sdram_config);
actual_size = get_ram_size(sdram_base, expected_size);
- unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
-
if (expected_size != actual_size)
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
diff --git a/board/miromico/hammerhead/hammerhead.c b/board/miromico/hammerhead/hammerhead.c
index 8b3e22cd9ec..78f4fd405ea 100644
--- a/board/miromico/hammerhead/hammerhead.c
+++ b/board/miromico/hammerhead/hammerhead.c
@@ -30,10 +30,25 @@
#include <asm/arch/clk.h>
#include <asm/arch/hmatrix.h>
#include <asm/arch/memory-map.h>
+#include <asm/arch/mmu.h>
#include <asm/arch/portmux.h>
DECLARE_GLOBAL_DATA_PTR;
+struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
+ {
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_NONE,
+ }, {
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_WRBACK,
+ },
+};
+
static const struct sdram_config sdram_config = {
.data_bits = SDRAM_DATA_32BIT,
.row_bits = 13,
@@ -80,13 +95,11 @@ phys_size_t initdram(int board_type)
unsigned long actual_size;
void *sdram_base;
- sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+ sdram_base = uncached(EBI_SDRAM_BASE);
expected_size = sdram_init(sdram_base, &sdram_config);
actual_size = get_ram_size(sdram_base, expected_size);
- unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
-
if (expected_size != actual_size)
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
diff --git a/board/overo/overo.c b/board/overo/overo.c
index e85be7d5e6c..1b67f1f5024 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -43,6 +43,17 @@
static void setup_net_chip(void);
#endif
+/* GPMC definitions for LAN9221 chips on Tobi expansion boards */
+static const u32 gpmc_lan_config[] = {
+ NET_LAN9221_GPMC_CONFIG1,
+ NET_LAN9221_GPMC_CONFIG2,
+ NET_LAN9221_GPMC_CONFIG3,
+ NET_LAN9221_GPMC_CONFIG4,
+ NET_LAN9221_GPMC_CONFIG5,
+ NET_LAN9221_GPMC_CONFIG6,
+ /*CONFIG7- computed as params */
+};
+
/*
* Routine: board_init
* Description: Early hardware init.
@@ -61,6 +72,70 @@ int board_init(void)
}
/*
+ * Routine: get_board_revision
+ * Description: Returns the board revision
+ */
+int get_board_revision(void)
+{
+ int revision;
+
+ if (!omap_request_gpio(112) &&
+ !omap_request_gpio(113) &&
+ !omap_request_gpio(115)) {
+
+ omap_set_gpio_direction(112, 1);
+ omap_set_gpio_direction(113, 1);
+ omap_set_gpio_direction(115, 1);
+
+ revision = omap_get_gpio_datain(115) << 2 |
+ omap_get_gpio_datain(113) << 1 |
+ omap_get_gpio_datain(112);
+
+ omap_free_gpio(112);
+ omap_free_gpio(113);
+ omap_free_gpio(115);
+ } else {
+ printf("Error: unable to acquire board revision GPIOs\n");
+ revision = -1;
+ }
+
+ return revision;
+}
+
+/*
+ * Routine: get_sdio2_config
+ * Description: Return information about the wifi module connection
+ * Returns 0 if the module connects though a level translator
+ * Returns 1 if the module connects directly
+ */
+int get_sdio2_config(void)
+{
+ int sdio_direct;
+
+ if (!omap_request_gpio(130) && !omap_request_gpio(139)) {
+
+ omap_set_gpio_direction(130, 0);
+ omap_set_gpio_direction(139, 1);
+
+ sdio_direct = 1;
+ omap_set_gpio_dataout(130, 0);
+ if (omap_get_gpio_datain(139) == 0) {
+ omap_set_gpio_dataout(130, 1);
+ if (omap_get_gpio_datain(139) == 1)
+ sdio_direct = 0;
+ }
+
+ omap_free_gpio(130);
+ omap_free_gpio(139);
+ } else {
+ printf("Error: unable to acquire sdio2 clk GPIOs\n");
+ sdio_direct = -1;
+ }
+
+ return sdio_direct;
+}
+
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
*/
@@ -73,6 +148,21 @@ int misc_init_r(void)
setup_net_chip();
#endif
+ printf("Board revision: %d\n", get_board_revision());
+
+ switch (get_sdio2_config()) {
+ case 0:
+ printf("Tranceiver detected on mmc2\n");
+ MUX_OVERO_SDIO2_TRANSCEIVER();
+ break;
+ case 1:
+ printf("Direct connection on mmc2\n");
+ MUX_OVERO_SDIO2_DIRECT();
+ break;
+ default:
+ printf("Unable to detect mmc2 connection type\n");
+ }
+
dieid_num_r();
return 0;
@@ -99,14 +189,13 @@ static void setup_net_chip(void)
{
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
- /* Configure GPMC registers */
- writel(NET_LAN9221_GPMC_CONFIG1, &gpmc_cfg->cs[5].config1);
- writel(NET_LAN9221_GPMC_CONFIG2, &gpmc_cfg->cs[5].config2);
- writel(NET_LAN9221_GPMC_CONFIG3, &gpmc_cfg->cs[5].config3);
- writel(NET_LAN9221_GPMC_CONFIG4, &gpmc_cfg->cs[5].config4);
- writel(NET_LAN9221_GPMC_CONFIG5, &gpmc_cfg->cs[5].config5);
- writel(NET_LAN9221_GPMC_CONFIG6, &gpmc_cfg->cs[5].config6);
- writel(NET_LAN9221_GPMC_CONFIG7, &gpmc_cfg->cs[5].config7);
+ /* first lan chip */
+ enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
+ GPMC_SIZE_16M);
+
+ /* second lan chip */
+ enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4], 0x2B000000,
+ GPMC_SIZE_16M);
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
diff --git a/board/overo/overo.h b/board/overo/overo.h
index 18735232a15..33a92e4e126 100644
--- a/board/overo/overo.h
+++ b/board/overo/overo.h
@@ -138,7 +138,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\
/* - SMSC911X_NRES*/\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_nCS3*/\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | DIS | M4)) /*GPIO_65*/\
/*DSS*/\
MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
@@ -189,18 +189,18 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M0)) /*CAM_WEN*/\
MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\
+ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) /*GPIO_112*/\
+ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) /*GPIO_113*/\
MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\
/* - PEN_DOWN*/\
- MUX_VAL(CP(CSI2_DY1), (IEN | PTU | EN | M4)) /*GPIO_115*/\
+ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) /*GPIO_115*/\
/*Audio Interface */\
MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\
MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\
MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\
MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
/*Expansion card */\
- MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\
+ MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) /*MMC1_CLK*/\
MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\
MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\
MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\
@@ -211,7 +211,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\
MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\
/*Wireless LAN */\
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
@@ -220,7 +220,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\
MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\
MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
/*Bluetooth*/\
MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\
MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
@@ -301,7 +301,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M2)) /*MMC3_CLK*/\
+ MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2)) /*MMC3_CLK*/\
MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\
MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4)) /*GPIO_14*/\
MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4)) /*GPIO_15 - X_GATE*/\
@@ -387,5 +387,36 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
+#define MUX_OVERO_SDIO2_DIRECT() \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
+ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M0)) /*MMC2_DAT4*/\
+ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M0)) /*MMC2_DAT5*/\
+ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M0)) /*MMC2_DAT6*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0)) /*MMC2_DAT7*/\
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTD | EN | M4)) /*GPIO_126*/\
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/
+
+#define MUX_OVERO_SDIO2_TRANSCEIVER() \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
+ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) /*GPIO_126*/\
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/
#endif
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 060d5d17c90..43367291132 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -67,7 +67,7 @@ int board_mmc_init(bd_t *bis)
int i;
/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
- gpio_direction_output(&s5pc110_gpio->gpio_j2, 7, 1);
+ gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
/*
* MMC0 GPIO
@@ -80,11 +80,11 @@ int board_mmc_init(bd_t *bis)
if (i == 2)
continue;
/* GPG0[0:6] special function 2 */
- gpio_cfg_pin(&s5pc110_gpio->gpio_g0, i, 0x2);
+ gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
/* GPG0[0:6] pull disable */
- gpio_set_pull(&s5pc110_gpio->gpio_g0, i, GPIO_PULL_NONE);
+ gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
/* GPG0[0:6] drv 4x */
- gpio_set_drv(&s5pc110_gpio->gpio_g0, i, GPIO_DRV_4X);
+ gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
}
return s5p_mmc_init(0);
diff --git a/board/samsung/goni/lowlevel_init.S b/board/samsung/goni/lowlevel_init.S
index 4b729927f42..62737aba1ab 100644
--- a/board/samsung/goni/lowlevel_init.S
+++ b/board/samsung/goni/lowlevel_init.S
@@ -51,7 +51,7 @@ lowlevel_init:
ldr r7, =S5PC100_GPIO_BASE
ldr r8, =S5PC100_GPIO_BASE
/* Read CPU ID */
- ldr r2, =S5PC1XX_PRO_ID
+ ldr r2, =S5PC110_PRO_ID
ldr r0, [r2]
mov r1, #0x00010000
and r0, r0, r1
@@ -377,7 +377,7 @@ lockloop:
* void system_clock_init(void)
*/
system_clock_init:
- ldr r0, =S5PC1XX_CLOCK_BASE @ 0xE0100000
+ ldr r0, =S5PC110_CLOCK_BASE @ 0xE0100000
/* Check S5PC100 */
cmp r7, r8
@@ -437,7 +437,7 @@ system_clock_init:
ldr r1, =0x3ff03ff
str r1, [r0, #0x114] @ S5PC110_CLAMP_STABLE
- ldr r0, =S5PC1XX_CLOCK_BASE @ 0xE0100000
+ ldr r0, =S5PC110_CLOCK_BASE @ 0xE0100000
/* Set Clock divider */
ldr r1, =0x14131330 @ 1:1:4:4, 1:4:5
diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S
index 32572c51da9..30d0d06a440 100644
--- a/board/samsung/smdkc100/lowlevel_init.S
+++ b/board/samsung/smdkc100/lowlevel_init.S
@@ -131,7 +131,7 @@ wakeup_reset:
* void system_clock_init(void)
*/
system_clock_init:
- ldr r8, =S5PC1XX_CLOCK_BASE @ 0xE0100000
+ ldr r8, =S5PC100_CLOCK_BASE @ 0xE0100000
/* Set Clock divider */
ldr r1, =0x00011110
diff --git a/board/samsung/smdkc100/onenand.c b/board/samsung/smdkc100/onenand.c
index c25869e5c40..501855edd38 100644
--- a/board/samsung/smdkc100/onenand.c
+++ b/board/samsung/smdkc100/onenand.c
@@ -35,7 +35,8 @@
void onenand_board_init(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
- struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+ struct s5pc100_clock *clk =
+ (struct s5pc100_clock *)samsung_get_base_clock();
struct samsung_onenand *onenand;
int value;
diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c
index fb466c6ece4..31e8d9e0ec3 100644
--- a/board/samsung/smdkc100/smdkc100.c
+++ b/board/samsung/smdkc100/smdkc100.c
@@ -38,10 +38,10 @@ static void smc9115_pre_init(void)
u32 smc_bw_conf, smc_bc_conf;
struct s5pc100_gpio *const gpio =
- (struct s5pc100_gpio *)S5PC100_GPIO_BASE;
+ (struct s5pc100_gpio *)samsung_get_base_gpio();
/* gpio configuration GPK0CON */
- gpio_cfg_pin(&gpio->gpio_k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+ gpio_cfg_pin(&gpio->k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
/* Ethernet needs bus width of 16 bits */
smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
diff --git a/board/syteco/jadecpu/Makefile b/board/syteco/jadecpu/Makefile
new file mode 100644
index 00000000000..87d2234ca38
--- /dev/null
+++ b/board/syteco/jadecpu/Makefile
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += jadecpu.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/syteco/jadecpu/config.mk b/board/syteco/jadecpu/config.mk
new file mode 100644
index 00000000000..c661f0b8afd
--- /dev/null
+++ b/board/syteco/jadecpu/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x46000000
diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c
new file mode 100644
index 00000000000..04d2f9d5a66
--- /dev/null
+++ b/board/syteco/jadecpu/jadecpu.c
@@ -0,0 +1,170 @@
+/*
+ * (c) 2010 Graf-Syteco, Matthias Weisser
+ * <weisserm@arcor.de>
+ *
+ * (C) Copyright 2007, mycable GmbH
+ * Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/mb86r0x.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+ struct mb86r0x_ccnt * ccnt = (struct mb86r0x_ccnt *)
+ MB86R0x_CCNT_BASE;
+
+ /* We select mode 0 for group 2 and mode 1 for group 4 */
+ writel(0x00000010, &ccnt->cmux_md);
+
+ gd->flags = 0;
+ gd->bd->bi_arch_number = MACH_TYPE_JADECPU;
+ gd->bd->bi_boot_params = PHYS_SDRAM + PHYS_SDRAM_SIZE - 0x10000;
+
+ icache_enable();
+
+ return 0;
+}
+
+static void setup_display_power(uint32_t pwr_bit, char *pwm_opts,
+ unsigned long pwm_base)
+{
+ struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
+ MB86R0x_GPIO_BASE;
+ struct mb86r0x_pwm *pwm = (struct mb86r0x_pwm *) pwm_base;
+ const char *e;
+
+ writel(readl(&gpio->gpdr2) | pwr_bit, &gpio->gpdr2);
+
+ e = getenv(pwm_opts);
+ if (e != NULL) {
+ const char *s;
+ uint32_t freq, init;
+
+ freq = 0;
+ init = 0;
+
+ s = strchr(e, 'f');
+ if (s != NULL)
+ freq = simple_strtol(s + 2, NULL, 0);
+
+ s = strchr(e, 'i');
+ if (s != NULL)
+ init = simple_strtol(s + 2, NULL, 0);
+
+ if (freq > 0) {
+ writel(CONFIG_MB86R0x_IOCLK / 1000 / freq,
+ &pwm->bcr);
+ writel(1002, &pwm->tpr);
+ writel(1, &pwm->pr);
+ writel(init * 10 + 1, &pwm->dr);
+ writel(1, &pwm->cr);
+ writel(1, &pwm->sr);
+ }
+ }
+}
+
+int board_late_init(void)
+{
+ struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
+ MB86R0x_GPIO_BASE;
+ uint32_t in_word;
+
+#ifdef CONFIG_VIDEO_MB86R0xGDC
+ /* Check if we have valid display settings and turn on power if so */
+ /* Display 0 */
+ if (getenv("gs_dsp_0_param") || getenv("videomode"))
+ setup_display_power((1 << 3), "gs_dsp_0_pwm",
+ MB86R0x_PWM0_BASE);
+
+ /* The corresponding GPIO is always an output */
+ writel(readl(&gpio->gpddr2) | (1 << 3), &gpio->gpddr2);
+
+ /* Display 1 */
+ if (getenv("gs_dsp_1_param") || getenv("videomode1"))
+ setup_display_power((1 << 4), "gs_dsp_1_pwm",
+ MB86R0x_PWM1_BASE);
+
+ /* The corresponding GPIO is always an output */
+ writel(readl(&gpio->gpddr2) | (1 << 4), &gpio->gpddr2);
+#endif /* CONFIG_VIDEO_MB86R0xGDC */
+
+ /* 5V enable */
+ writel(readl(&gpio->gpdr1) & ~(1 << 5), &gpio->gpdr1);
+ writel(readl(&gpio->gpddr1) | (1 << 5), &gpio->gpddr1);
+
+ /* We have special boot options if told by GPIOs */
+ in_word = readl(&gpio->gpdr1);
+
+ if ((in_word & 0xC0) == 0xC0) {
+ setenv("stdin", "serial");
+ setenv("stdout", "serial");
+ setenv("stderr", "serial");
+ setenv("preboot", "run gs_slow_boot");
+ } else if ((in_word & 0xC0) != 0) {
+ setenv("stdout", "vga");
+ setenv("gs_bootcmd", "mw.l 0x40000000 0 1024; usb start;"
+ "fatls usb 0; fatload usb 0 0x40000000 mcq5resq.bin;"
+ "bootelf 0x40000000; bootelf 0x10080000");
+ setenv("preboot", "run gs_slow_boot");
+ } else {
+ setenv("stdin", "serial");
+ setenv("stdout", "serial");
+ setenv("stderr", "serial");
+ if (getenv("gs_devel")) {
+ setenv("preboot", "run gs_slow_boot");
+ } else {
+ setenv("gs_bootcmd", "bootelf 0x10080000");
+ setenv("preboot", "run gs_fast_boot");
+ }
+ }
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ return 0;
+}
+
+/*
+ * DRAM configuration
+ */
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
diff --git a/board/syteco/jadecpu/lowlevel_init.S b/board/syteco/jadecpu/lowlevel_init.S
new file mode 100644
index 00000000000..5ad4dceb924
--- /dev/null
+++ b/board/syteco/jadecpu/lowlevel_init.S
@@ -0,0 +1,265 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2007, mycable GmbH
+ * Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
+ *
+ * (C) Copyright 2003, ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/macro.h>
+#include <asm/arch/mb86r0x.h>
+#include <asm/arch/asm-offsets.h>
+
+/* Set up the platform, once the cpu has been initialized */
+.globl lowlevel_init
+lowlevel_init:
+/*
+ * Initialize Clock Reset Generator (CRG)
+ */
+
+ ldr r0, =MB86R0x_CRG_BASE
+
+ /* Not change the initial value that is set by external pin.*/
+WAIT_PLL:
+ ldr r2, [r0, #CRG_CRPR] /* Wait for PLLREADY */
+ tst r2, #MB86R0x_CRG_CRPR_PLLRDY
+ beq WAIT_PLL
+
+ /* Set clock gate control */
+ ldr r1, =CONFIG_SYS_CRG_CRHA_INIT
+ str r1, [r0, #CRG_CRHA]
+ ldr r1, =CONFIG_SYS_CRG_CRPA_INIT
+ str r1, [r0, #CRG_CRPA]
+ ldr r1, =CONFIG_SYS_CRG_CRPB_INIT
+ str r1, [r0, #CRG_CRPB]
+ ldr r1, =CONFIG_SYS_CRG_CRHB_INIT
+ str r1, [r0, #CRG_CRHB]
+ ldr r1, =CONFIG_SYS_CRG_CRAM_INIT
+ str r1, [r0, #CRG_CRAM]
+
+/*
+ * Initialize External Bus Interface
+ */
+ ldr r0, =MB86R0x_MEMC_BASE
+
+ ldr r1, =CONFIG_SYS_MEMC_MCFMODE0_INIT
+ str r1, [r0, #MEMC_MCFMODE0]
+ ldr r1, =CONFIG_SYS_MEMC_MCFMODE2_INIT
+ str r1, [r0, #MEMC_MCFMODE2]
+ ldr r1, =CONFIG_SYS_MEMC_MCFMODE4_INIT
+ str r1, [r0, #MEMC_MCFMODE4]
+
+ ldr r1, =CONFIG_SYS_MEMC_MCFTIM0_INIT
+ str r1, [r0, #MEMC_MCFTIM0]
+ ldr r1, =CONFIG_SYS_MEMC_MCFTIM2_INIT
+ str r1, [r0, #MEMC_MCFTIM2]
+ ldr r1, =CONFIG_SYS_MEMC_MCFTIM4_INIT
+ str r1, [r0, #MEMC_MCFTIM4]
+
+ ldr r1, =CONFIG_SYS_MEMC_MCFAREA0_INIT
+ str r1, [r0, #MEMC_MCFAREA0]
+ ldr r1, =CONFIG_SYS_MEMC_MCFAREA2_INIT
+ str r1, [r0, #MEMC_MCFAREA2]
+ ldr r1, =CONFIG_SYS_MEMC_MCFAREA4_INIT
+ str r1, [r0, #MEMC_MCFAREA4]
+
+/*
+ * Initialize DDR2 Controller
+ */
+
+ /* Wait for PLL LOCK up time or more */
+ wait_timer 20
+
+ /*
+ * (2) Initialize DDRIF
+ */
+ ldr r0, =MB86R0x_DDR2_BASE
+ ldr r1, =CONFIG_SYS_DDR2_DRIMS_INIT
+ strh r1, [r0, #DDR2_DRIMS]
+
+ /*
+ * (3) Wait for 20MCKPs(120nsec) or more
+ */
+ wait_timer 20
+
+ /*
+ * (4) IRESET/IUSRRST release
+ */
+ ldr r0, =MB86R0x_CCNT_BASE
+ ldr r1, =CONFIG_SYS_CCNT_CDCRC_INIT_1
+ str r1, [r0, #CCNT_CDCRC]
+
+ /*
+ * (5) Wait for 20MCKPs(120nsec) or more
+ */
+ wait_timer 20
+
+ /*
+ * (6) IDLLRST release
+ */
+ ldr r0, =MB86R0x_CCNT_BASE
+ ldr r1, =CONFIG_SYS_CCNT_CDCRC_INIT_2
+ str r1, [r0, #CCNT_CDCRC]
+
+ /*
+ * (7+8) Wait for 200us(=200000ns) or more (DDR2 Spec)
+ */
+ wait_timer 33536
+
+ /*
+ * (9) MCKE ON
+ */
+ ldr r0, =MB86R0x_DDR2_BASE
+ ldr r1, =CONFIG_SYS_DDR2_DRIC1_INIT
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_DRIC2_INIT
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =CONFIG_SYS_DDR2_DRCA_INIT
+ strh r1, [r0, #DDR2_DRCA]
+ ldr r1, =MB86R0x_DDR2_DRCI_INIT
+ strh r1, [r0, #DDR2_DRIC]
+
+ /*
+ * (10) Initialize SDRAM
+ */
+
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ wait_timer 67 /* 400ns wait */
+
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_1
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_1
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_2
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_2
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_3
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_3
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_4
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_4
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_5
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_5
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ wait_timer 200
+
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_6
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_6
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_7
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_7
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ wait_timer 18 /* 105ns wait */
+
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_8
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_8
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ wait_timer 200 /* MRS to OCD: 200clock */
+
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_9
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_9
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC1_10
+ strh r1, [r0, #DDR2_DRIC1]
+ ldr r1, =CONFIG_SYS_DDR2_INIT_DRIC2_10
+ strh r1, [r0, #DDR2_DRIC2]
+ ldr r1, =MB86R0x_DDR2_DRCI_CMD
+ strh r1, [r0, #DDR2_DRIC]
+
+ ldr r1, =CONFIG_SYS_DDR2_DRCM_INIT
+ strh r1, [r0, #DDR2_DRCM]
+
+ ldr r1, =CONFIG_SYS_DDR2_DRCST1_INIT
+ strh r1, [r0, #DDR2_DRCST1]
+
+ ldr r1, =CONFIG_SYS_DDR2_DRCST2_INIT
+ strh r1, [r0, #DDR2_DRCST2]
+
+ ldr r1, =CONFIG_SYS_DDR2_DRCR_INIT
+ strh r1, [r0, #DDR2_DRCR]
+
+ ldr r1, =CONFIG_SYS_DDR2_DRCF_INIT
+ strh r1, [r0, #DDR2_DRCF]
+
+ ldr r1, =CONFIG_SYS_DDR2_DRASR_INIT
+ strh r1, [r0, #DDR2_DRASR]
+
+ /*
+ * (11) ODT setting
+ */
+ ldr r1, =CONFIG_SYS_DDR2_DROBS_INIT
+ strh r1, [r0, #DDR2_DROBS]
+ ldr r1, =CONFIG_SYS_DDR2_DROABA_INIT
+ strh r1, [r0, #DDR2_DROABA]
+ ldr r1, =CONFIG_SYS_DDR2_DRIBSODT1_INIT
+ strh r1, [r0, #DDR2_DRIBSODT1]
+
+ /*
+ * (12) Shift to ODTCONT ON (SDRAM side) and DDR2 usual operation mode
+ */
+ ldr r1, =CONFIG_SYS_DDR2_DROS_INIT
+ strh r1, [r0, #DDR2_DROS]
+ ldr r1, =MB86R0x_DDR2_DRCI_NORMAL
+ strh r1, [r0, #DDR2_DRIC]
+
+ mov pc, lr
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 3b4c9e73b57..4647908052c 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -38,8 +38,6 @@
#include <asm/mach-types.h>
#include "beagle.h"
-static int beagle_revision_c;
-
/*
* Routine: board_init
* Description: Early hardware init.
@@ -58,43 +56,41 @@ int board_init(void)
}
/*
- * Routine: beagle_get_revision
- * Description: Return the revision of the BeagleBoard this code is running on.
- * If it is a revision Ax/Bx board, this function returns 0,
- * on a revision C board you will get a 1.
+ * Routine: get_board_revision
+ * Description: Detect if we are running on a Beagle revision Ax/Bx,
+ * C1/2/3, C4 or xM. This can be done by reading
+ * the level of GPIO173, GPIO172 and GPIO171. This should
+ * result in
+ * GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx
+ * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3
+ * GPIO173, GPIO172, GPIO171: 1 0 1 => C4
+ * GPIO173, GPIO172, GPIO171: 0 0 0 => xM
*/
-int beagle_get_revision(void)
+int get_board_revision(void)
{
- return beagle_revision_c;
-}
+ int revision;
-/*
- * Routine: beagle_identify
- * Description: Detect if we are running on a Beagle revision Ax/Bx or
- * Cx. This can be done by GPIO_171. If this is low, we are
- * running on a revision C board.
- */
-void beagle_identify(void)
-{
- beagle_revision_c = 0;
- if (!omap_request_gpio(171)) {
- unsigned int val;
+ if (!omap_request_gpio(171) &&
+ !omap_request_gpio(172) &&
+ !omap_request_gpio(173)) {
omap_set_gpio_direction(171, 1);
- val = omap_get_gpio_datain(171);
- omap_free_gpio(171);
+ omap_set_gpio_direction(172, 1);
+ omap_set_gpio_direction(173, 1);
- if (val)
- beagle_revision_c = 0;
- else
- beagle_revision_c = 1;
+ revision = omap_get_gpio_datain(173) << 2 |
+ omap_get_gpio_datain(172) << 1 |
+ omap_get_gpio_datain(171);
+
+ omap_free_gpio(171);
+ omap_free_gpio(172);
+ omap_free_gpio(173);
+ } else {
+ printf("Error: unable to acquire board revision GPIOs\n");
+ revision = -1;
}
- printf("Board revision ");
- if (beagle_revision_c)
- printf("C\n");
- else
- printf("Ax/Bx\n");
+ return revision;
}
/*
@@ -106,6 +102,44 @@ int misc_init_r(void)
struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
+ switch (get_board_revision()) {
+ case REVISION_AXBX:
+ printf("Beagle Rev Ax/Bx\n");
+ setenv("beaglerev", "AxBx");
+ setenv("mpurate", "600");
+ break;
+ case REVISION_CX:
+ printf("Beagle Rev C1/C2/C3\n");
+ setenv("beaglerev", "Cx");
+ setenv("mpurate", "600");
+ MUX_BEAGLE_C();
+ break;
+ case REVISION_C4:
+ printf("Beagle Rev C4\n");
+ setenv("beaglerev", "C4");
+ setenv("mpurate", "720");
+ MUX_BEAGLE_C();
+ /* Set VAUX2 to 1.8V for EHCI PHY */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+ TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+ TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ break;
+ case REVISION_XM:
+ printf("Beagle xM Rev A\n");
+ setenv("beaglerev", "xMA");
+ setenv("mpurate", "1000");
+ MUX_BEAGLE_XM();
+ /* Set VAUX2 to 1.8V for EHCI PHY */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+ TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+ TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ break;
+ default:
+ printf("Beagle unknown 0x%02x\n", get_board_revision());
+ }
+
twl4030_power_init();
twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
@@ -120,8 +154,6 @@ int misc_init_r(void)
writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
- beagle_identify();
-
dieid_num_r();
return 0;
@@ -136,8 +168,4 @@ int misc_init_r(void)
void set_muxconf_regs(void)
{
MUX_BEAGLE();
-
- if (beagle_revision_c) {
- MUX_BEAGLE_C();
- }
}
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index 7fe6275e379..d86033772b8 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -33,7 +33,11 @@ const omap3_sysinfo sysinfo = {
#endif
};
-#define BOARD_REVISION_MASK (0x1 << 11)
+/* BeagleBoard revisions */
+#define REVISION_AXBX 0x7
+#define REVISION_CX 0x6
+#define REVISION_C4 0x5
+#define REVISION_XM 0x0
/*
* IEN - Input Enable
@@ -264,7 +268,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\
MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\
MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\
- MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI*/\
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTU | EN | M4)) /*GPIO_173*/\
MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\
MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\
MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\
@@ -374,11 +378,37 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
#define MUX_BEAGLE_C() \
- MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
- MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
- MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\
+ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\
MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\
MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/
+#define MUX_BEAGLE_XM() \
+ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\
+ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
+ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M7)) /*safe_mode*/\
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M3)) /*DSS_DATA0*/\
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M3)) /*DSS_DATA1*/\
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M3)) /*DSS_DATA2*/\
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M3)) /*DSS_DATA3*/\
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M3)) /*DSS_DATA4*/\
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M3)) /*DSS_DATA5*/\
+ MUX_VAL(CP(SYS_BOOT0), (IDIS | PTD | DIS | M3)) /*DSS_DATA18*/\
+ MUX_VAL(CP(SYS_BOOT1), (IDIS | PTD | DIS | M3)) /*DSS_DATA19*/\
+ MUX_VAL(CP(SYS_BOOT3), (IDIS | PTD | DIS | M3)) /*DSS_DATA20*/\
+ MUX_VAL(CP(SYS_BOOT4), (IDIS | PTD | DIS | M3)) /*DSS_DATA21*/\
+ MUX_VAL(CP(SYS_BOOT5), (IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\
+ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M3)) /*DSS_DATA23*/
+
#endif
diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h
index 8f6a6b1a6b8..877ae5f9598 100644
--- a/board/ti/panda/panda.h
+++ b/board/ti/panda/panda.h
@@ -237,28 +237,28 @@ const struct pad_conf_entry core_padconf_array[] = {
};
const struct pad_conf_entry wkup_padconf_array[] = {
- {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
- {PAD1_SIM_CLK, (M0)}, /* sim_clk */
- {PAD0_SIM_RESET, (M0)}, /* sim_reset */
- {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
- {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
- {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
- {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
- {PAD1_FREF_XTAL_IN, (M0)}, /* # */
- {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
- {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
- {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
- {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
- {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */
- {PAD0_FREF_CLK4_OUT, (M0)}, /* # */
- {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
- {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
- {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
- {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
- {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
- {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
- {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
+ {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
+ {PAD1_SIM_CLK, (M0)}, /* sim_clk */
+ {PAD0_SIM_RESET, (M0)}, /* sim_reset */
+ {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
+ {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
+ {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+ {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+ {PAD1_FREF_XTAL_IN, (M0)}, /* # */
+ {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
+ {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
+ {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
+ {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
+ {PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */
+ {PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_2 */
+ {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
+ {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
+ {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
+ {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
+ {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
+ {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
+ {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
};
#endif
diff --git a/boards.cfg b/boards.cfg
index 69c68979354..05ddb8c69d4 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -43,6 +43,7 @@ meesc arm arm926ejs - esd at91
otc570 arm arm926ejs - esd at91
pm9261 arm arm926ejs - ronetix at91
pm9263 arm arm926ejs - ronetix at91
+jadecpu arm arm926ejs jadecpu syteco mb86r0x
suen3 arm arm926ejs km_arm keymile kirkwood
rd6281a arm arm926ejs - Marvell kirkwood
mx51evk arm armv7 mx51evk freescale mx51
diff --git a/common/serial.c b/common/serial.c
index fceabfa1e7e..1345c08aefd 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -40,9 +40,9 @@ struct serial_device *__default_serial_console (void)
return &serial_scc_device;
#elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
|| defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \
- || defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC83xx) \
- || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) \
- || defined(CONFIG_SYS_SC520)
+ || defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) \
+ || defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) \
+ || defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520)
#if defined(CONFIG_CONS_INDEX) && defined(CONFIG_SYS_NS16550_SERIAL)
#if (CONFIG_CONS_INDEX==1)
return &eserial1_device;
@@ -78,7 +78,7 @@ struct serial_device *__default_serial_console (void)
#else
#error "CONFIG_SERIAL? missing."
#endif
-#elif defined(CONFIG_S5PC1XX)
+#elif defined(CONFIG_S5P)
#if defined(CONFIG_SERIAL0)
return &s5p_serial0_device;
#elif defined(CONFIG_SERIAL1)
@@ -162,7 +162,7 @@ void serial_initialize (void)
serial_register(&s3c24xx_serial1_device);
serial_register(&s3c24xx_serial2_device);
#endif
-#if defined(CONFIG_S5PC1XX)
+#if defined(CONFIG_S5P)
serial_register(&s5p_serial0_device);
serial_register(&s5p_serial1_device);
serial_register(&s5p_serial2_device);
diff --git a/doc/README.atmel_mci b/doc/README.atmel_mci
new file mode 100644
index 00000000000..18b1bdf7e5d
--- /dev/null
+++ b/doc/README.atmel_mci
@@ -0,0 +1,86 @@
+How to use SD/MMC cards with Atmel SoCs having MCI hardware
+-----------------------------------------------------------
+2010-08-16 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
+
+This is a new approach to use Atmel MCI hardware with the
+general MMC framework. Therefore it benefits from that
+framework's abilities to handle SDHC Cards and the ability
+to write blocks.
+
+- AT91SAM9XE512 (tested, will definitely work with XE128 and XE256)
+- AT91SAM9260 (not tested, but MCI is to AT91SAM9XE)
+- AT91SAM9G20 (not tested, should work)
+
+It should work with all other ATMEL devices that have MCI,
+including AVR32.
+
+The generic driver does NOT assign port pins to the MCI block
+nor does it start the MCI clock. This has to be handled in a
+board/SoC specific manner before the driver is initialized:
+
+example: this is added to at91sam9260_devices.c:
+
+#if defined(CONFIG_ATMEL_MCI) || defined(CONFIG_GENERIC_ATMEL_MCI)
+void at91_mci_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTA, 8, PUP); /* MCCK */
+#if defined(CONFIG_ATMEL_MCI_PORTB)
+ at91_set_b_periph(AT91_PIO_PORTA, 1, PUP); /* MCCDB */
+ at91_set_b_periph(AT91_PIO_PORTA, 0, PUP); /* MCDB0 */
+ at91_set_b_periph(AT91_PIO_PORTA, 5, PUP); /* MCDB1 */
+ at91_set_b_periph(AT91_PIO_PORTA, 4, PUP); /* MCDB2 */
+ at91_set_b_periph(AT91_PIO_PORTA, 3, PUP); /* MCDB3 */
+#else
+ at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* MCCDA */
+ at91_set_a_periph(AT91_PIO_PORTA, 6, PUP); /* MCDA0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 9, PUP); /* MCDA1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 10, PUP); /* MCDA2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 11, PUP); /* MCDA3 */
+#endif
+}
+#endif
+
+the board specific file need added:
+...
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+# include <mmc.h>
+#endif
+...
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_MCI);
+ at91_mci_hw_init();
+
+ /* This calls the atmel_mci_init in gen_atmel_mci.c */
+ return atmel_mci_init((void *)AT91_BASE_MCI);
+}
+
+/* this is a weak define that we are overriding */
+int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+{
+ /*
+ * the only currently existing use of this function
+ * (fsl_esdhc.c) suggests this function must return
+ * *cs = TRUE if a card is NOT detected -> in most
+ * cases the value of the pin when the detect switch
+ * closes to GND
+ */
+ *cd = at91_get_gpio_value (CONFIG_SYS_MMC_CD_PIN) ? 1 : 0;
+ return 0;
+}
+
+#endif
+
+and the board definition files needs:
+
+/* SD/MMC card */
+#define CONFIG_MMC 1
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_GENERIC_ATMEL_MCI 1
+#define CONFIG_ATMEL_MCI_PORTB 1 /* Atmel XE-EK uses port B */
+#define CONFIG_SYS_MMC_CD_PIN AT91_PIN_PC9
+#define CONFIG_CMD_MMC 1
+
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 528ca2e99af..07d395d898f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -29,7 +29,7 @@ COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o
COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
COBJS-$(CONFIG_MX31_GPIO) += mx31_gpio.o
COBJS-$(CONFIG_PCA953X) += pca953x.o
-COBJS-$(CONFIG_S5PC1XX) += s5p_gpio.o
+COBJS-$(CONFIG_S5P) += s5p_gpio.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 8dfd8a32ba6..6603d74294b 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -25,12 +25,13 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libmmc.a
-COBJS-$(CONFIG_GENERIC_MMC) += mmc.o
COBJS-$(CONFIG_ATMEL_MCI) += atmel_mci.o
COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
-COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o
COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
+COBJS-$(CONFIG_GENERIC_MMC) += mmc.o
+COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o
+COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o
COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o
diff --git a/drivers/mmc/atmel_mci.h b/drivers/mmc/atmel_mci.h
index 5b4f5c99b6d..823a77d91b3 100644
--- a/drivers/mmc/atmel_mci.h
+++ b/drivers/mmc/atmel_mci.h
@@ -22,7 +22,45 @@
#ifndef __CPU_AT32AP_ATMEL_MCI_H__
#define __CPU_AT32AP_ATMEL_MCI_H__
-/* Atmel MultiMedia Card Interface (MCI) registers */
+#ifndef __ASSEMBLY__
+
+/*
+ * Structure for struct SoC access.
+ * Names starting with '_' are fillers.
+ */
+typedef struct atmel_mci {
+ /* reg Offset */
+ u32 cr; /* 0x00 */
+ u32 mr; /* 0x04 */
+ u32 dtor; /* 0x08 */
+ u32 sdcr; /* 0x0c */
+ u32 argr; /* 0x10 */
+ u32 cmdr; /* 0x14 */
+ u32 _18; /* 0x18 */
+ u32 _1c; /* 0x1c */
+ u32 rspr; /* 0x20 */
+ u32 rspr1; /* 0x24 */
+ u32 rspr2; /* 0x28 */
+ u32 rspr3; /* 0x2c */
+ u32 rdr; /* 0x30 */
+ u32 tdr; /* 0x34 */
+ u32 _38; /* 0x38 */
+ u32 _3c; /* 0x3c */
+ u32 sr; /* 0x40 */
+ u32 ier; /* 0x44 */
+ u32 idr; /* 0x48 */
+ u32 imr; /* 0x4c */
+} atmel_mci_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * NOTICE: Use of registers offsets is depreciated.
+ * These defines will be removed once the old driver
+ * is taken out of commision.
+ *
+ * Atmel MultiMedia Card Interface (MCI) registers
+ */
#define MMCI_CR 0x0000
#define MMCI_MR 0x0004
#define MMCI_DTOR 0x0008
@@ -192,7 +230,13 @@
<< MMCI_##name##_OFFSET)) \
| MMCI_BF(name,value))
-/* Register access macros */
+/*
+ * NOTICE: Use of registers offsets is depreciated.
+ * These defines will be removed once the old driver
+ * is taken out of commision.
+ *
+ * Register access macros
+ */
#define mmci_readl(reg) \
readl((void *)MMCI_BASE + MMCI_##reg)
#define mmci_writel(reg,value) \
diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c
new file mode 100644
index 00000000000..fa4df9943a7
--- /dev/null
+++ b/drivers/mmc/gen_atmel_mci.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright (C) 2010
+ * Rob Emanuele <rob@emanuele.us>
+ * Reinhard Meyer, EMK Elektronik <reinhard.meyer@emk-elektronik.de>
+ *
+ * Original Driver:
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <part.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/byteorder.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+#include "atmel_mci.h"
+
+#ifndef CONFIG_SYS_MMC_CLK_OD
+# define CONFIG_SYS_MMC_CLK_OD 150000
+#endif
+
+#define MMC_DEFAULT_BLKLEN 512
+
+#if defined(CONFIG_ATMEL_MCI_PORTB)
+# define MCI_BUS 1
+#else
+# define MCI_BUS 0
+#endif
+
+static int initialized = 0;
+
+/*
+ * Print command and status:
+ *
+ * - always when DEBUG is defined
+ * - on command errors
+ */
+static void dump_cmd(u32 cmdr, u32 arg, u32 status, const char* msg)
+{
+ printf("gen_atmel_mci: CMDR %08x (%2u) ARGR %08x (SR: %08x) %s\n",
+ cmdr, cmdr&0x3F, arg, status, msg);
+}
+
+/* Setup for MCI Clock and Block Size */
+static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen)
+{
+ atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;
+ u32 bus_hz = get_mci_clk_rate();
+ u32 clkdiv = 255;
+
+ debug("mci: bus_hz is %u, setting clock %u Hz, block size %u\n",
+ bus_hz, hz, blklen);
+ if (hz > 0) {
+ /* find lowest clkdiv yielding a rate <= than requested */
+ for (clkdiv=0; clkdiv<255; clkdiv++) {
+ if ((bus_hz / (clkdiv+1) / 2) <= hz)
+ break;
+ }
+ }
+ printf("mci: setting clock %u Hz, block size %u\n",
+ (bus_hz / (clkdiv+1)) / 2, blklen);
+
+ blklen &= 0xfffc;
+ /* On some platforms RDPROOF and WRPROOF are ignored */
+ writel((MMCI_BF(CLKDIV, clkdiv)
+ | MMCI_BF(BLKLEN, blklen)
+ | MMCI_BIT(RDPROOF)
+ | MMCI_BIT(WRPROOF)), &mci->mr);
+ initialized = 1;
+}
+
+/* Return the CMDR with flags for a given command and data packet */
+static u32 mci_encode_cmd(
+ struct mmc_cmd *cmd, struct mmc_data *data, u32* error_flags)
+{
+ u32 cmdr = 0;
+
+ /* Default Flags for Errors */
+ *error_flags |= (MMCI_BIT(DTOE) | MMCI_BIT(RDIRE) | MMCI_BIT(RENDE) |
+ MMCI_BIT(RINDE) | MMCI_BIT(RTOE));
+
+ /* Default Flags for the Command */
+ cmdr |= MMCI_BIT(MAXLAT);
+
+ if (data) {
+ cmdr |= MMCI_BF(TRCMD, 1);
+ if (data->blocks > 1)
+ cmdr |= MMCI_BF(TRTYP, 1);
+ if (data->flags & MMC_DATA_READ)
+ cmdr |= MMCI_BIT(TRDIR);
+ }
+
+ if (cmd->resp_type & MMC_RSP_CRC)
+ *error_flags |= MMCI_BIT(RCRCE);
+ if (cmd->resp_type & MMC_RSP_136)
+ cmdr |= MMCI_BF(RSPTYP, 2);
+ else if (cmd->resp_type & MMC_RSP_BUSY)
+ cmdr |= MMCI_BF(RSPTYP, 3);
+ else if (cmd->resp_type & MMC_RSP_PRESENT)
+ cmdr |= MMCI_BF(RSPTYP, 1);
+
+ return cmdr | MMCI_BF(CMDNB, cmd->cmdidx);
+}
+
+/* Entered into function pointer in mci_send_cmd */
+static u32 mci_data_read(atmel_mci_t *mci, u32* data, u32 error_flags)
+{
+ u32 status;
+
+ do {
+ status = readl(&mci->sr);
+ if (status & (error_flags | MMCI_BIT(OVRE)))
+ goto io_fail;
+ } while (!(status & MMCI_BIT(RXRDY)));
+
+ if (status & MMCI_BIT(RXRDY)) {
+ *data = readl(&mci->rdr);
+ status = 0;
+ }
+io_fail:
+ return status;
+}
+
+/* Entered into function pointer in mci_send_cmd */
+static u32 mci_data_write(atmel_mci_t *mci, u32* data, u32 error_flags)
+{
+ u32 status;
+
+ do {
+ status = readl(&mci->sr);
+ if (status & (error_flags | MMCI_BIT(UNRE)))
+ goto io_fail;
+ } while (!(status & MMCI_BIT(TXRDY)));
+
+ if (status & MMCI_BIT(TXRDY)) {
+ writel(*data, &mci->tdr);
+ status = 0;
+ }
+io_fail:
+ return status;
+}
+
+/*
+ * Entered into mmc structure during driver init
+ *
+ * Sends a command out on the bus and deals with the block data.
+ * Takes the mmc pointer, a command pointer, and an optional data pointer.
+ */
+static int
+mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
+{
+ atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;
+ u32 cmdr;
+ u32 error_flags = 0;
+ u32 status;
+
+ if (!initialized) {
+ puts ("MCI not initialized!\n");
+ return COMM_ERR;
+ }
+
+ /* Figure out the transfer arguments */
+ cmdr = mci_encode_cmd(cmd, data, &error_flags);
+
+ /* Send the command */
+ writel(cmd->cmdarg, &mci->argr);
+ writel(cmdr, &mci->cmdr);
+
+#ifdef DEBUG
+ dump_cmd(cmdr, cmd->cmdarg, 0, "DEBUG");
+#endif
+
+ /* Wait for the command to complete */
+ while (!((status = readl(&mci->sr)) & MMCI_BIT(CMDRDY)));
+
+ if (status & error_flags) {
+ dump_cmd(cmdr, cmd->cmdarg, status, "Command Failed");
+ return COMM_ERR;
+ }
+
+ /* Copy the response to the response buffer */
+ if (cmd->resp_type & MMC_RSP_136) {
+ cmd->response[0] = readl(&mci->rspr);
+ cmd->response[1] = readl(&mci->rspr1);
+ cmd->response[2] = readl(&mci->rspr2);
+ cmd->response[3] = readl(&mci->rspr3);
+ } else
+ cmd->response[0] = readl(&mci->rspr);
+
+ /* transfer all of the blocks */
+ if (data) {
+ u32 word_count, block_count;
+ u32* ioptr;
+ u32 sys_blocksize, dummy, i;
+ u32 (*mci_data_op)
+ (atmel_mci_t *mci, u32* data, u32 error_flags);
+
+ if (data->flags & MMC_DATA_READ) {
+ mci_data_op = mci_data_read;
+ sys_blocksize = mmc->read_bl_len;
+ ioptr = (u32*)data->dest;
+ } else {
+ mci_data_op = mci_data_write;
+ sys_blocksize = mmc->write_bl_len;
+ ioptr = (u32*)data->src;
+ }
+
+ status = 0;
+ for (block_count = 0;
+ block_count < data->blocks && !status;
+ block_count++) {
+ word_count = 0;
+ do {
+ status = mci_data_op(mci, ioptr, error_flags);
+ word_count++;
+ ioptr++;
+ } while (!status && word_count < (data->blocksize/4));
+#ifdef DEBUG
+ if (data->flags & MMC_DATA_READ)
+ {
+ printf("Read Data:\n");
+ print_buffer(0, data->dest, 1,
+ word_count*4, 0);
+ }
+#endif
+#ifdef DEBUG
+ if (!status && word_count < (sys_blocksize / 4))
+ printf("filling rest of block...\n");
+#endif
+ /* fill the rest of a full block */
+ while (!status && word_count < (sys_blocksize / 4)) {
+ status = mci_data_op(mci, &dummy,
+ error_flags);
+ word_count++;
+ }
+ if (status) {
+ dump_cmd(cmdr, cmd->cmdarg, status,
+ "Data Transfer Failed");
+ return COMM_ERR;
+ }
+ }
+
+ /* Wait for Transfer End */
+ i = 0;
+ do {
+ status = readl(&mci->sr);
+
+ if (status & error_flags) {
+ dump_cmd(cmdr, cmd->cmdarg, status,
+ "DTIP Wait Failed");
+ return COMM_ERR;
+ }
+ i++;
+ } while ((status & MMCI_BIT(DTIP)) && i < 10000);
+ if (status & MMCI_BIT(DTIP)) {
+ dump_cmd(cmdr, cmd->cmdarg, status,
+ "XFER DTIP never unset, ignoring");
+ }
+ }
+
+ return 0;
+}
+
+/* Entered into mmc structure during driver init */
+static void mci_set_ios(struct mmc *mmc)
+{
+ atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;
+ int busw = (mmc->bus_width == 4) ? 1 : 0;
+
+ /* Set the clock speed */
+ mci_set_mode(mmc, mmc->clock, MMC_DEFAULT_BLKLEN);
+
+ /*
+ * set the bus width and select slot for this interface
+ * there is no capability for multiple slots on the same interface yet
+ * Bitfield SCDBUS needs to be expanded to 2 bits for 8-bit buses
+ */
+ writel(MMCI_BF(SCDBUS, busw) | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
+}
+
+/* Entered into mmc structure during driver init */
+static int mci_init(struct mmc *mmc)
+{
+ atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;
+
+ /* Initialize controller */
+ writel(MMCI_BIT(SWRST), &mci->cr); /* soft reset */
+ writel(MMCI_BIT(PWSDIS), &mci->cr); /* disable power save */
+ writel(MMCI_BIT(MCIEN), &mci->cr); /* enable mci */
+
+ /* Initial Time-outs */
+ writel(0x5f, &mci->dtor);
+ /* Disable Interrupts */
+ writel(~0UL, &mci->idr);
+
+ /* Set default clocks and blocklen */
+ mci_set_mode(mmc, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
+
+ return 0;
+}
+
+/*
+ * This is the only exported function
+ *
+ * Call it with the MCI register base address
+ */
+int atmel_mci_init(void *regs)
+{
+ struct mmc *mmc = malloc(sizeof(struct mmc));
+
+ if (!mmc)
+ return -1;
+ strcpy(mmc->name, "mci");
+ mmc->priv = regs;
+ mmc->send_cmd = mci_send_cmd;
+ mmc->set_ios = mci_set_ios;
+ mmc->init = mci_init;
+
+ /* need to be able to pass these in on a board by board basis */
+ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->host_caps = MMC_MODE_4BIT;
+ /*
+ * min and max frequencies determined by
+ * max and min of clock divider
+ */
+ mmc->f_min = get_mci_clk_rate() / (2*256);
+ mmc->f_max = get_mci_clk_rate() / (2*1);
+
+ mmc_register(mmc);
+
+ return 0;
+}
diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c
index 9506cca2181..15d41e55bd1 100644
--- a/drivers/mmc/omap3_mmc.c
+++ b/drivers/mmc/omap3_mmc.c
@@ -33,7 +33,7 @@
#include "omap3_mmc.h"
-const unsigned short mmc_transspeed_val[15][4] = {
+static const unsigned short mmc_transspeed_val[15][4] = {
{CLKD(10, 1), CLKD(10, 10), CLKD(10, 100), CLKD(10, 1000)},
{CLKD(12, 1), CLKD(12, 10), CLKD(12, 100), CLKD(12, 1000)},
{CLKD(13, 1), CLKD(13, 10), CLKD(13, 100), CLKD(13, 1000)},
@@ -51,7 +51,7 @@ const unsigned short mmc_transspeed_val[15][4] = {
{CLKD(80, 1), CLKD(80, 10), CLKD(80, 100), CLKD(80, 1000)}
};
-mmc_card_data cur_card_data;
+static mmc_card_data cur_card_data;
static block_dev_desc_t mmc_blk_dev;
static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
@@ -80,7 +80,7 @@ block_dev_desc_t *mmc_get_dev(int dev)
return (block_dev_desc_t *) &mmc_blk_dev;
}
-unsigned char mmc_board_init(void)
+static unsigned char mmc_board_init(void)
{
#if defined(CONFIG_TWL4030_POWER)
twl4030_power_mmc_init();
@@ -114,7 +114,7 @@ unsigned char mmc_board_init(void)
return 1;
}
-void mmc_init_stream(void)
+static void mmc_init_stream(void)
{
writel(readl(&mmc_base->con) | INIT_INITSTREAM, &mmc_base->con);
@@ -129,7 +129,7 @@ void mmc_init_stream(void)
writel(readl(&mmc_base->con) & ~INIT_INITSTREAM, &mmc_base->con);
}
-unsigned char mmc_clock_config(unsigned int iclk, unsigned short clk_div)
+static unsigned char mmc_clock_config(unsigned int iclk, unsigned short clk_div)
{
unsigned int val;
@@ -158,7 +158,7 @@ unsigned char mmc_clock_config(unsigned int iclk, unsigned short clk_div)
return 1;
}
-unsigned char mmc_init_setup(void)
+static unsigned char mmc_init_setup(void)
{
unsigned int reg_val;
@@ -192,7 +192,7 @@ unsigned char mmc_init_setup(void)
return 1;
}
-unsigned char mmc_send_cmd(unsigned int cmd, unsigned int arg,
+static unsigned char mmc_send_cmd(unsigned int cmd, unsigned int arg,
unsigned int *response)
{
unsigned int mmc_stat;
@@ -228,7 +228,7 @@ unsigned char mmc_send_cmd(unsigned int cmd, unsigned int arg,
return 1;
}
-unsigned char mmc_read_data(unsigned int *output_buf)
+static unsigned char mmc_read_data(unsigned int *output_buf)
{
unsigned int mmc_stat;
unsigned int read_count = 0;
@@ -269,7 +269,7 @@ unsigned char mmc_read_data(unsigned int *output_buf)
return 1;
}
-unsigned char mmc_detect_card(mmc_card_data *mmc_card_cur)
+static unsigned char mmc_detect_card(mmc_card_data *mmc_card_cur)
{
unsigned char err;
unsigned int argument = 0;
@@ -380,7 +380,7 @@ unsigned char mmc_detect_card(mmc_card_data *mmc_card_cur)
return 1;
}
-unsigned char mmc_read_cardsize(mmc_card_data *mmc_dev_data,
+static unsigned char mmc_read_cardsize(mmc_card_data *mmc_dev_data,
mmc_csd_reg_t *cur_csd)
{
mmc_extended_csd_reg_t ext_csd;
@@ -434,45 +434,48 @@ unsigned char mmc_read_cardsize(mmc_card_data *mmc_dev_data,
return 1;
}
-unsigned char omap_mmc_read_sect(unsigned int start_sec, unsigned int num_bytes,
- mmc_card_data *mmc_c,
- unsigned long *output_buf)
+static unsigned long mmc_bread(int dev_num, unsigned long blknr,
+ lbaint_t blkcnt, void *dst)
{
unsigned char err;
unsigned int argument;
unsigned int resp[4];
- unsigned int num_sec_val =
- (num_bytes + (MMCSD_SECTOR_SIZE - 1)) / MMCSD_SECTOR_SIZE;
+ unsigned int *output_buf = dst;
unsigned int sec_inc_val;
+ lbaint_t i;
- if (num_sec_val == 0)
- return 1;
+ if (blkcnt == 0)
+ return 0;
- if (mmc_c->mode == SECTOR_MODE) {
- argument = start_sec;
+ if (cur_card_data.mode == SECTOR_MODE) {
+ argument = blknr;
sec_inc_val = 1;
} else {
- argument = start_sec * MMCSD_SECTOR_SIZE;
+ argument = blknr * MMCSD_SECTOR_SIZE;
sec_inc_val = MMCSD_SECTOR_SIZE;
}
- while (num_sec_val) {
+ for (i = 0; i < blkcnt; i++) {
err = mmc_send_cmd(MMC_CMD17, argument, resp);
- if (err != 1)
- return err;
+ if (err != 1) {
+ printf("mmc: CMD17 failed, status = %08x\n", err);
+ break;
+ }
- err = mmc_read_data((unsigned int *) output_buf);
- if (err != 1)
- return err;
+ err = mmc_read_data(output_buf);
+ if (err != 1) {
+ printf("mmc: read failed, status = %08x\n", err);
+ break;
+ }
output_buf += (MMCSD_SECTOR_SIZE / 4);
argument += sec_inc_val;
- num_sec_val--;
}
- return 1;
+
+ return i;
}
-unsigned char configure_mmc(mmc_card_data *mmc_card_cur)
+static unsigned char configure_mmc(mmc_card_data *mmc_card_cur)
{
unsigned char ret_val;
unsigned int argument;
@@ -541,13 +544,6 @@ unsigned char configure_mmc(mmc_card_data *mmc_card_cur)
return 1;
}
-unsigned long mmc_bread(int dev_num, unsigned long blknr, lbaint_t blkcnt,
- void *dst)
-{
- omap_mmc_read_sect(blknr, (blkcnt * MMCSD_SECTOR_SIZE), &cur_card_data,
- (unsigned long *) dst);
- return 1;
-}
int mmc_legacy_init(int dev)
{
diff --git a/drivers/mmc/omap3_mmc.h b/drivers/mmc/omap3_mmc.h
index cbb3dc3a3a6..e4d263c8776 100644
--- a/drivers/mmc/omap3_mmc.h
+++ b/drivers/mmc/omap3_mmc.h
@@ -230,13 +230,4 @@ typedef union {
mmc_csd_reg_t Card_CSD;
} mmc_resp_t;
-extern mmc_card_data mmc_dev;
-
-unsigned char mmc_lowlevel_init(void);
-unsigned char mmc_send_command(unsigned int cmd, unsigned int arg,
- unsigned int *response);
-unsigned char mmc_setup_clock(unsigned int iclk, unsigned short clkd);
-unsigned char mmc_set_opendrain(unsigned char state);
-unsigned char mmc_read_data(unsigned int *output_buf);
-
#endif /* MMC_H */
diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c
index 669b1d0d2f9..1fd425cbb67 100644
--- a/drivers/mmc/s5p_mmc.c
+++ b/drivers/mmc/s5p_mmc.c
@@ -23,12 +23,6 @@
#include <asm/io.h>
#include <asm/arch/mmc.h>
-#ifdef DEBUG_S5P_HSMMC
-#define dbg(x...) printf(x)
-#else
-#define dbg(x...) do { } while (0)
-#endif
-
/* support 4 mmc hosts */
struct mmc mmc_dev[4];
struct mmc_host mmc_host[4];
@@ -36,18 +30,14 @@ struct mmc_host mmc_host[4];
static inline struct s5p_mmc *s5p_get_base_mmc(int dev_index)
{
unsigned long offset = dev_index * sizeof(struct s5p_mmc);
-
- if (cpu_is_s5pc100())
- return (struct s5p_mmc *)(S5PC100_MMC_BASE + offset);
- else
- return (struct s5p_mmc *)(S5PC110_MMC_BASE + offset);
+ return (struct s5p_mmc *)(samsung_get_base_mmc() + offset);
}
static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
{
unsigned char ctrl;
- dbg("data->dest: %08x\n", (u32)data->dest);
+ debug("data->dest: %08x\n", (u32)data->dest);
writel((u32)data->dest, &host->reg->sysad);
/*
* DMASEL[4:3]
@@ -128,7 +118,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
if (data)
mmc_prepare_data(host, data);
- dbg("cmd->arg: %08x\n", cmd->cmdarg);
+ debug("cmd->arg: %08x\n", cmd->cmdarg);
writel(cmd->cmdarg, &host->reg->argument);
if (data)
@@ -165,7 +155,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
if (data)
flags |= (1 << 5);
- dbg("cmd: %d\n", cmd->cmdidx);
+ debug("cmd: %d\n", cmd->cmdidx);
writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
@@ -186,11 +176,11 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
if (mask & (1 << 16)) {
/* Timeout Error */
- dbg("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
+ debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
return TIMEOUT;
} else if (mask & (1 << 15)) {
/* Error Interrupt */
- dbg("error: %08x cmd %d\n", mask, cmd->cmdidx);
+ debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
return -1;
}
@@ -206,7 +196,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
cmd->response[i] |=
readb(offset - 1);
}
- dbg("cmd->resp[%d]: %08x\n",
+ debug("cmd->resp[%d]: %08x\n",
i, cmd->response[i]);
}
} else if (cmd->resp_type & MMC_RSP_BUSY) {
@@ -223,10 +213,10 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
}
cmd->response[0] = readl(&host->reg->rspreg0);
- dbg("cmd->resp[0]: %08x\n", cmd->response[0]);
+ debug("cmd->resp[0]: %08x\n", cmd->response[0]);
} else {
cmd->response[0] = readl(&host->reg->rspreg0);
- dbg("cmd->resp[0]: %08x\n", cmd->response[0]);
+ debug("cmd->resp[0]: %08x\n", cmd->response[0]);
}
}
@@ -242,11 +232,11 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
return -1;
} else if (mask & (1 << 3)) {
/* DMA Interrupt */
- dbg("DMA end\n");
+ debug("DMA end\n");
break;
} else if (mask & (1 << 1)) {
/* Transfer Complete */
- dbg("r/w is done\n");
+ debug("r/w is done\n");
break;
}
}
@@ -288,7 +278,7 @@ static void mmc_change_clock(struct mmc_host *host, uint clock)
div = 2;
else
div = 1;
- dbg("div: %d\n", div);
+ debug("div: %d\n", div);
div >>= 1;
/*
@@ -325,7 +315,7 @@ static void mmc_set_ios(struct mmc *mmc)
unsigned char ctrl;
unsigned long val;
- dbg("set_ios: bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
+ debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
/*
* SELCLKPADDS[17:16]
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ed1c9c9a88a..7d178468adb 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2653,9 +2653,12 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
}
if (!type) {
- printk(KERN_INFO "%s: unknown NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x\n", __func__,
- *maf_id, dev_id);
+ /* supress warning if there is no nand */
+ if (*maf_id != 0x00 && *maf_id != 0xff &&
+ dev_id != 0x00 && dev_id != 0xff)
+ printk(KERN_INFO "%s: unknown NAND device: "
+ "Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+ __func__, *maf_id, dev_id);
return ERR_PTR(-ENODEV);
}
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index f2be687639b..20b49124d5a 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -67,7 +67,7 @@ do { \
#define MAP_01 (0x1 << 24)
#define MAP_10 (0x2 << 24)
#define MAP_11 (0x3 << 24)
-#elif defined(CONFIG_S5PC1XX)
+#elif defined(CONFIG_S5P)
#define MAP_00 (0x0 << 26)
#define MAP_01 (0x1 << 26)
#define MAP_10 (0x2 << 26)
@@ -121,7 +121,7 @@ static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
{
return (fba << 12) | (fpa << 6) | (fsa << 4);
}
-#elif defined(CONFIG_S5PC1XX)
+#elif defined(CONFIG_S5P)
static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
{
return (fba << 13) | (fpa << 7) | (fsa << 5);
@@ -614,7 +614,7 @@ void s3c_onenand_init(struct mtd_info *mtd)
#if defined(CONFIG_S3C64XX)
onenand->base = (void *)0x70100000;
onenand->ahb_addr = (void *)0x20000000;
-#elif defined(CONFIG_S5PC1XX)
+#elif defined(CONFIG_S5P)
onenand->base = (void *)0xE7100000;
onenand->ahb_addr = (void *)0xB0000000;
#endif
diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
index eb066cb58df..1a5408959e1 100644
--- a/drivers/power/twl4030.c
+++ b/drivers/power/twl4030.c
@@ -59,57 +59,48 @@ void twl4030_power_reset_init(void)
}
}
-
/*
- * Power Init
+ * Set Device Group and Voltage
*/
-#define DEV_GRP_P1 0x20
-#define VAUX3_VSEL_28 0x03
-#define DEV_GRP_ALL 0xE0
-#define VPLL2_VSEL_18 0x05
-#define VDAC_VSEL_18 0x03
+void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
+ u8 dev_grp, u8 dev_grp_sel)
+{
+ /* Select the Device Group */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp_sel,
+ dev_grp);
+
+ /* Select the Voltage */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_val,
+ vsel_reg);
+}
void twl4030_power_init(void)
{
- unsigned char byte;
-
/* set VAUX3 to 2.8V */
- byte = DEV_GRP_P1;
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
- TWL4030_PM_RECEIVER_VAUX3_DEV_GRP);
- byte = VAUX3_VSEL_28;
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
- TWL4030_PM_RECEIVER_VAUX3_DEDICATED);
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED,
+ TWL4030_PM_RECEIVER_VAUX3_VSEL_28,
+ TWL4030_PM_RECEIVER_VAUX3_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
/* set VPLL2 to 1.8V */
- byte = DEV_GRP_ALL;
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
- TWL4030_PM_RECEIVER_VPLL2_DEV_GRP);
- byte = VPLL2_VSEL_18;
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
- TWL4030_PM_RECEIVER_VPLL2_DEDICATED);
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED,
+ TWL4030_PM_RECEIVER_VPLL2_VSEL_18,
+ TWL4030_PM_RECEIVER_VPLL2_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_ALL);
/* set VDAC to 1.8V */
- byte = DEV_GRP_P1;
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
- TWL4030_PM_RECEIVER_VDAC_DEV_GRP);
- byte = VDAC_VSEL_18;
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
- TWL4030_PM_RECEIVER_VDAC_DEDICATED);
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED,
+ TWL4030_PM_RECEIVER_VDAC_VSEL_18,
+ TWL4030_PM_RECEIVER_VDAC_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
}
-#define VMMC1_VSEL_30 0x02
-
void twl4030_power_mmc_init(void)
{
- unsigned char byte;
-
- byte = DEV_GRP_P1;
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
- TWL4030_PM_RECEIVER_VMMC1_DEV_GRP);
-
- /* 3 Volts */
- byte = VMMC1_VSEL_30;
- twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
- TWL4030_PM_RECEIVER_VMMC1_DEDICATED);
+ /* Set VMMC1 to 3 Volts */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
+ TWL4030_PM_RECEIVER_VMMC1_VSEL_30,
+ TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
}
+
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 772a49a9021..98734db77f6 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -27,6 +27,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)librtc.a
+COBJS-$(CONFIG_RTC_AT91SAM9_RTT) += at91sam9_rtt.o
COBJS-$(CONFIG_RTC_BFIN) += bfin_rtc.o
COBJS-y += date.o
COBJS-$(CONFIG_RTC_DS12887) += ds12887.o
diff --git a/drivers/rtc/at91sam9_rtt.c b/drivers/rtc/at91sam9_rtt.c
new file mode 100644
index 00000000000..de8e30d0d7c
--- /dev/null
+++ b/drivers/rtc/at91sam9_rtt.c
@@ -0,0 +1,100 @@
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support for the internal Real-time Timer
+ * of AT91SAM9260 and compatibles.
+ * Compatible with the LinuX rtc driver workaround:
+ * The RTT cannot be written to, but only reset.
+ * The actual time is the sum of RTT and one of
+ * the four GPBR registers.
+ *
+ * The at91sam9260 has 4 GPBR (0-3).
+ * For their typical use see at91_gpbr.h !
+ *
+ * make sure u-boot and kernel use the same GPBR !
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <asm/errno.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/io.h>
+#include <asm/arch/at91_rtt.h>
+#include <asm/arch/at91_gpbr.h>
+
+#if defined(CONFIG_CMD_DATE)
+
+int rtc_get (struct rtc_time *tmp)
+{
+ at91_rtt_t *rtt = (at91_rtt_t *) AT91_RTT_BASE;
+ at91_gpbr_t *gpbr = (at91_gpbr_t *) AT91_GPR_BASE;
+ ulong tim;
+ ulong tim2;
+ ulong off;
+
+ do {
+ tim = readl(&rtt->vr);
+ tim2 = readl(&rtt->vr);
+ } while (tim!=tim2);
+ off = readl(&gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]);
+ /* off==0 means time is invalid, but we ignore that */
+ to_tm (tim+off, tmp);
+ return 0;
+}
+
+int rtc_set (struct rtc_time *tmp)
+{
+ at91_rtt_t *rtt = (at91_rtt_t *) AT91_RTT_BASE;
+ at91_gpbr_t *gpbr = (at91_gpbr_t *) AT91_GPR_BASE;
+ ulong tim;
+
+ tim = mktime (tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ /* clear alarm, set prescaler to 32768, clear counter */
+ writel(32768+AT91_RTT_RTTRST, &rtt->mr);
+ writel(~0, &rtt->ar);
+ writel(tim, &gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]);
+ /* wait for counter clear to happen, takes less than a 1/32768th second */
+ while (readl(&rtt->vr) != 0)
+ ;
+ return 0;
+}
+
+void rtc_reset (void)
+{
+ at91_rtt_t *rtt = (at91_rtt_t *) AT91_RTT_BASE;
+ at91_gpbr_t *gpbr = (at91_gpbr_t *) AT91_GPR_BASE;
+
+ /* clear alarm, set prescaler to 32768, clear counter */
+ writel(32768+AT91_RTT_RTTRST, &rtt->mr);
+ writel(~0, &rtt->ar);
+ writel(0, &gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]);
+ /* wait for counter clear to happen, takes less than a 1/32768th second */
+ while (readl(&rtt->vr) != 0)
+ ;
+}
+
+#endif
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index c731bfb594f..6d45a8ef554 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -36,7 +36,7 @@ COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
-COBJS-$(CONFIG_S5PC1XX) += serial_s5p.o
+COBJS-$(CONFIG_S5P) += serial_s5p.o
COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial.o
COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o
COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index e0d4e8004dd..77096643f1f 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -30,11 +30,7 @@
static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
{
u32 offset = dev_index * sizeof(struct s5p_uart);
-
- if (cpu_is_s5pc100())
- return (struct s5p_uart *)(S5PC100_UART_BASE + offset);
- else
- return (struct s5p_uart *)(S5PC110_UART_BASE + offset);
+ return (struct s5p_uart *)(samsung_get_base_uart() + offset);
}
/*
@@ -67,11 +63,11 @@ void serial_setbrg_dev(const int dev_index)
{
DECLARE_GLOBAL_DATA_PTR;
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
- u32 pclk = get_pclk();
+ u32 uclk = get_uart_clk(dev_index);
u32 baudrate = gd->baudrate;
u32 val;
- val = pclk / baudrate;
+ val = uclk / baudrate;
writel(val / 16 - 1, &uart->ubrdiv);
writew(udivslot[val % 16], &uart->udivslot);
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 317c0b41b6f..d0de9319684 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -43,7 +43,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
u32 csrx;
void *regs;
- if (cs > 3 || !spi_cs_is_valid(bus, cs))
+ if (!spi_cs_is_valid(bus, cs))
return NULL;
switch (bus) {
@@ -168,8 +168,17 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
* somewhat quirky, and it doesn't really buy us much anyway
* in the context of U-Boot.
*/
- if (flags & SPI_XFER_BEGIN)
+ if (flags & SPI_XFER_BEGIN) {
spi_cs_activate(slave);
+ /*
+ * sometimes the RDR is not empty when we get here,
+ * in theory that should not happen, but it DOES happen.
+ * Read it here to be on the safe side.
+ * That also clears the OVRES flag. Required if the
+ * following loop exits due to OVRES!
+ */
+ spi_readl(as, RDR);
+ }
for (len_tx = 0, len_rx = 0; len_rx < len; ) {
status = spi_readl(as, SR);
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 7d84fc71a6e..4be82e73960 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -32,6 +32,7 @@ COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
+COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o
COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o
COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
COBJS-$(CONFIG_SED156X) += sed156x.o
diff --git a/drivers/video/mb86r0xgdc.c b/drivers/video/mb86r0xgdc.c
new file mode 100644
index 00000000000..3bdc1db61d6
--- /dev/null
+++ b/drivers/video/mb86r0xgdc.c
@@ -0,0 +1,186 @@
+/*
+ * (C) Copyright 2010
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mb86r0xgdc.c - Graphic interface for Fujitsu MB86R0x integrated graphic
+ * controller.
+ */
+
+#include <common.h>
+
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <video_fb.h>
+#include "videomodes.h"
+
+/*
+ * 4MB (at the end of system RAM)
+ */
+#define VIDEO_MEM_SIZE 0x400000
+
+#define FB_SYNC_CLK_INV (1<<16) /* pixel clock inverted */
+
+/*
+ * Graphic Device
+ */
+static GraphicDevice mb86r0x;
+
+static void dsp_init(struct mb86r0x_gdc_dsp *dsp, char *modestr,
+ u32 *videomem)
+{
+ struct ctfb_res_modes var_mode;
+ u32 dcm1, dcm2, dcm3;
+ u16 htp, hdp, hdb, hsp, vtr, vsp, vdp;
+ u8 hsw, vsw;
+ u32 l2m, l2em, l2oa0, l2da0, l2oa1, l2da1;
+ u16 l2dx, l2dy, l2wx, l2wy, l2ww, l2wh;
+ unsigned long div;
+ int bpp;
+ u32 i;
+
+ bpp = video_get_params(&var_mode, modestr);
+
+ if (bpp == 0) {
+ var_mode.xres = 640;
+ var_mode.yres = 480;
+ var_mode.pixclock = 39721; /* 25MHz */
+ var_mode.left_margin = 48;
+ var_mode.right_margin = 16;
+ var_mode.upper_margin = 33;
+ var_mode.lower_margin = 10;
+ var_mode.hsync_len = 96;
+ var_mode.vsync_len = 2;
+ var_mode.sync = 0;
+ var_mode.vmode = 0;
+ bpp = 15;
+ }
+
+ /* Fill memory with white */
+ for (i = 0; i < var_mode.xres * var_mode.yres / 2; i++)
+ *videomem++ = 0xFFFFFFFF;
+
+ mb86r0x.winSizeX = var_mode.xres;
+ mb86r0x.winSizeY = var_mode.yres;
+
+ /* LCD base clock is ~ 660MHZ. We do calculations in kHz */
+ div = 660000 / (1000000000L / var_mode.pixclock);
+ if (div > 64)
+ div = 64;
+ if (0 == div)
+ div = 1;
+
+ dcm1 = (div - 1) << 8;
+ dcm2 = 0x00000000;
+ if (var_mode.sync & FB_SYNC_CLK_INV)
+ dcm3 = 0x00000100;
+ else
+ dcm3 = 0x00000000;
+
+ htp = var_mode.left_margin + var_mode.xres +
+ var_mode.hsync_len + var_mode.right_margin;
+ hdp = var_mode.xres;
+ hdb = var_mode.xres;
+ hsp = var_mode.xres + var_mode.right_margin;
+ hsw = var_mode.hsync_len;
+
+ vsw = var_mode.vsync_len;
+ vtr = var_mode.upper_margin + var_mode.yres +
+ var_mode.vsync_len + var_mode.lower_margin;
+ vsp = var_mode.yres + var_mode.lower_margin;
+ vdp = var_mode.yres;
+
+ l2m = ((var_mode.yres - 1) << (0)) |
+ (((var_mode.xres * 2) / 64) << (16)) |
+ ((1) << (31));
+
+ l2em = (1 << 0) | (1 << 1);
+
+ l2oa0 = mb86r0x.frameAdrs;
+ l2da0 = mb86r0x.frameAdrs;
+ l2oa1 = mb86r0x.frameAdrs;
+ l2da1 = mb86r0x.frameAdrs;
+ l2dx = 0;
+ l2dy = 0;
+ l2wx = 0;
+ l2wy = 0;
+ l2ww = var_mode.xres;
+ l2wh = var_mode.yres - 1;
+
+ writel(dcm1, &dsp->dcm1);
+ writel(dcm2, &dsp->dcm2);
+ writel(dcm3, &dsp->dcm3);
+
+ writew(htp, &dsp->htp);
+ writew(hdp, &dsp->hdp);
+ writew(hdb, &dsp->hdb);
+ writew(hsp, &dsp->hsp);
+ writeb(hsw, &dsp->hsw);
+
+ writeb(vsw, &dsp->vsw);
+ writew(vtr, &dsp->vtr);
+ writew(vsp, &dsp->vsp);
+ writew(vdp, &dsp->vdp);
+
+ writel(l2m, &dsp->l2m);
+ writel(l2em, &dsp->l2em);
+ writel(l2oa0, &dsp->l2oa0);
+ writel(l2da0, &dsp->l2da0);
+ writel(l2oa1, &dsp->l2oa1);
+ writel(l2da1, &dsp->l2da1);
+ writew(l2dx, &dsp->l2dx);
+ writew(l2dy, &dsp->l2dy);
+ writew(l2wx, &dsp->l2wx);
+ writew(l2wy, &dsp->l2wy);
+ writew(l2ww, &dsp->l2ww);
+ writew(l2wh, &dsp->l2wh);
+
+ writel(dcm1 | (1 << 18) | (1 << 31), &dsp->dcm1);
+}
+
+void *video_hw_init(void)
+{
+ struct mb86r0x_gdc *gdc = (struct mb86r0x_gdc *) MB86R0x_GDC_BASE;
+ GraphicDevice *pGD = &mb86r0x;
+ char *s;
+ u32 *vid;
+
+ memset(pGD, 0, sizeof(GraphicDevice));
+
+ pGD->gdfIndex = GDF_15BIT_555RGB;
+ pGD->gdfBytesPP = 2;
+ pGD->memSize = VIDEO_MEM_SIZE;
+ pGD->frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE;
+
+ vid = (u32 *)pGD->frameAdrs;
+
+ s = getenv("videomode");
+ if (s != NULL)
+ dsp_init(&gdc->dsp0, s, vid);
+
+ s = getenv("videomode1");
+ if (s != NULL)
+ dsp_init(&gdc->dsp1, s, vid);
+
+ return pGD;
+}
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 4ed5514d302..83056b6fd0c 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -49,6 +49,9 @@
#define CONFIG_SYS_CLKDIV_PBA 2
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index b258f2df439..6416d170919 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -73,6 +73,9 @@
*/
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index 2ef255274f4..a4d9b0b9083 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -73,6 +73,9 @@
*/
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index 195be82095f..06bb5da8a3f 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -73,6 +73,9 @@
*/
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index f93118edbc4..d3cbee6b634 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -73,6 +73,9 @@
*/
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index 049298cfa36..9ef4523de42 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -1,5 +1,5 @@
/*
- * CPUAT91 by (C) Copyright 2006 Eric Benard
+ * CPUAT91 by (C) Copyright 2006-2010 Eric Benard
* eric@eukrea.com
*
* Configuration settings for the CPUAT91 board.
@@ -23,15 +23,12 @@
* MA 02111-1307 USA
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
+#ifndef _CONFIG_CPUAT91_H
+#define _CONFIG_CPUAT91_H
#ifdef CONFIG_CPUAT91_RAM
#define CONFIG_SKIP_LOWLEVEL_INIT 1
#define CONFIG_SKIP_RELOCATE_UBOOT 1
-#define CONFIG_CPUAT91 1
#else
#define CONFIG_BOOTDELAY 1
#endif
@@ -43,6 +40,7 @@
#define CONFIG_ARM920T 1
#define CONFIG_AT91RM9200 1
+#define CONFIG_CPUAT91 1
#undef CONFIG_USE_IRQ
#define USE_920T_MMU 1
@@ -89,16 +87,36 @@
#undef CONFIG_USART0
#undef CONFIG_USART1
-#define CONFIG_HARD_I2C 1
+#undef CONFIG_HARD_I2C
+#define CONFIG_SOFT_I2C 1
+#define AT91_PIN_SDA (1<<25)
+#define AT91_PIN_SCL (1<<26)
+
+#define CONFIG_SYS_I2C_INIT_BOARD 1
+#define CONFIG_SYS_I2C_SPEED 50000
+#define CONFIG_SYS_I2C_SLAVE 0
+
+#define I2C_INIT i2c_init_board();
+#define I2C_ACTIVE writel(AT91_PMX_AA_TWD, &pio->pioa.mddr);
+#define I2C_TRISTATE writel(AT91_PMX_AA_TWD, &pio->pioa.mder);
+#define I2C_READ ((readl(&pio->pioa.pdsr) & AT91_PMX_AA_TWD) != 0)
+#define I2C_SDA(bit) \
+ if (bit) \
+ writel(AT91_PMX_AA_TWD, &pio->pioa.sodr); \
+ else \
+ writel(AT91_PMX_AA_TWD, &pio->pioa.codr);
+#define I2C_SCL(bit) \
+ if (bit) \
+ writel(AT91_PMX_AA_TWCK, &pio->pioa.sodr); \
+ else \
+ writel(AT91_PMX_AA_TWCK, &pio->pioa.codr);
+
+#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED)
-#if defined(CONFIG_HARD_I2C)
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-#endif
#define CONFIG_BOOTP_BOOTFILESIZE 1
#define CONFIG_BOOTP_BOOTPATH 1
@@ -117,10 +135,8 @@
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NFS
-#if defined(CONFIG_HARD_I2C)
#define CONFIG_CMD_EEPROM 1
#define CONFIG_CMD_I2C 1
-#endif
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
@@ -148,6 +164,7 @@
#define PHYS_FLASH_1 0x10000000
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_MAX_FLASH_SECT 128
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#if defined(CONFIG_CMD_USB)
#define CONFIG_USB_OHCI_NEW 1
@@ -206,7 +223,7 @@
"mtdparts=physmap-flash.0:" \
"128k(u-boot)ro," \
"128k(u-boot-env)," \
- "1408k(kernel)," \
+ "1792k(kernel)," \
"-(rootfs)"
#define CONFIG_BOOTARGS \
@@ -221,13 +238,13 @@
"1001FFFF; erase 10000000 1001FFFF; cp.b 21000000 " \
"10000000 ${filesize}\0" \
"flui=tftp 21000000 cpuat91/uImage; protect off 10040000 " \
- "1019ffff; erase 10040000 1019ffff; cp.b 21000000 " \
+ "1019ffff; erase 10040000 101fffff; cp.b 21000000 " \
"10040000 ${filesize}\0" \
"flrfs=tftp 21000000 cpuat91/rootfs.jffs2; protect off " \
- "101a0000 10ffffff; erase 101a0000 10ffffff; cp.b " \
- "21000000 101A0000 ${filesize}\0" \
+ "10200000 10ffffff; erase 10200000 10ffffff; cp.b " \
+ "21000000 10200000 ${filesize}\0" \
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
"flashboot=run ramargs;bootm 10040000\0" \
"netboot=run ramargs;tftpboot 21000000 cpuat91/uImage;" \
"bootm 21000000\0"
-#endif /* __CONFIG_H */
+#endif /* _CONFIG_CPUAT91_H */
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 739ff0d6271..1c381c76b85 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -70,6 +70,9 @@
*/
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index 0c70af57425..8ca04ea4809 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -47,6 +47,9 @@
#define CONFIG_SYS_CLKDIV_PBA 2
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h
new file mode 100644
index 00000000000..29c534c4a9f
--- /dev/null
+++ b/include/configs/jadecpu.h
@@ -0,0 +1,291 @@
+/*
+ * (C) Copyright 2010
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * Configuation settings for the jadecpu board
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MB86R0x
+#define CONFIG_MB86R0x_IOCLK get_bus_freq(0)
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+/*
+ * Environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "gs_fast_boot=setenv bootdelay 5\0" \
+ "gs_slow_boot=setenv bootdelay 10\0" \
+ "bootcmd=mw.l 0x40000000 0 1024; usb start;" \
+ "fatls usb 0; fatload usb 0 0x40000000 jadecpu-init.bin;" \
+ "bootelf 0x40000000\0" \
+ ""
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+#define BOARD_LATE_INIT 1
+
+/*
+ * Compressions
+ */
+#define CONFIG_LZO
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * Serial
+ */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#define CONFIG_SYS_NS16550_COM1 0xfffe1000 /* UART 0 */
+#define CONFIG_SYS_NS16550_COM2 0xfff50000 /* UART 2 */
+#define CONFIG_SYS_NS16550_COM3 0xfff51000 /* UART 3 */
+#define CONFIG_SYS_NS16550_COM4 0xfff43000 /* UART 4 */
+
+#define CONFIG_CONS_INDEX 4
+
+/*
+ * Ethernet
+ */
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE 0x02000000
+#define CONFIG_SMC911X_16_BIT
+
+/*
+ * Video
+ */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_MB86R0xGDC
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (800*480 + 256*4 + 10*1024)
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define VIDEO_KBD_INIT_FCT 0
+#define VIDEO_TSTC_FCT serial_tstc
+#define VIDEO_GETC_FCT serial_getc
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_CMD_BMP 1
+#define CONFIG_CMD_CAN 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_ELF 1
+#define CONFIG_CMD_FAT 1
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_USB 1
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0xFFF81000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mb86r0x"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x40000000 /* Start address of DDRRAM */
+#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
+
+/*
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_FLASH_BASE 0x10000000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000)
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_SIZE (128 * 1024)
+
+/*
+ * CFI FLASH driver setup
+ */
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster */
+
+#define CONFIG_SYS_LOAD_ADDR 0x40000000 /* load address */
+
+#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024))
+#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "jade> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+#define CONFIG_PREBOOT ""
+
+#define CONFIG_BOOTDELAY 5
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR "delaygs"
+#define CONFIG_AUTOBOOT_STOP_STR "stopgs"
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+/*
+ * Clock reset generator init
+ */
+#define CONFIG_SYS_CRG_CRHA_INIT 0xffff
+#define CONFIG_SYS_CRG_CRPA_INIT 0xffff
+#define CONFIG_SYS_CRG_CRPB_INIT 0xfffe
+#define CONFIG_SYS_CRG_CRHB_INIT 0xffff
+#define CONFIG_SYS_CRG_CRAM_INIT 0xffef
+
+/*
+ * Memory controller settings
+ */
+#define CONFIG_SYS_MEMC_MCFMODE0_INIT 0x00000001 /* 16bit */
+#define CONFIG_SYS_MEMC_MCFMODE2_INIT 0x00000001 /* 16bit */
+#define CONFIG_SYS_MEMC_MCFMODE4_INIT 0x00000021 /* 16bit, Page*/
+#define CONFIG_SYS_MEMC_MCFTIM0_INIT 0x16191008
+#define CONFIG_SYS_MEMC_MCFTIM2_INIT 0x03061008
+#define CONFIG_SYS_MEMC_MCFTIM4_INIT 0x03061804
+#define CONFIG_SYS_MEMC_MCFAREA0_INIT 0x000000c0 /* 0x0c000000 1MB */
+#define CONFIG_SYS_MEMC_MCFAREA2_INIT 0x00000020 /* 0x02000000 1MB */
+#define CONFIG_SYS_MEMC_MCFAREA4_INIT 0x001f0000 /* 0x10000000 32 MB */
+
+/*
+ * DDR2 controller init settings
+ */
+#define CONFIG_SYS_DDR2_DRIMS_INIT 0x5555
+#define CONFIG_SYS_CCNT_CDCRC_INIT_1 0x00000002
+#define CONFIG_SYS_CCNT_CDCRC_INIT_2 0x00000003
+#define CONFIG_SYS_DDR2_DRIC1_INIT 0x003f
+#define CONFIG_SYS_DDR2_DRIC2_INIT 0x0000
+#define CONFIG_SYS_DDR2_DRCA_INIT 0xc124 /* 512Mbit DDR2SDRAM x 2 */
+#define CONFIG_SYS_DDR2_DRCM_INIT 0x0032
+#define CONFIG_SYS_DDR2_DRCST1_INIT 0x3418
+#define CONFIG_SYS_DDR2_DRCST2_INIT 0x6e32
+#define CONFIG_SYS_DDR2_DRCR_INIT 0x0141
+#define CONFIG_SYS_DDR2_DRCF_INIT 0x0002
+#define CONFIG_SYS_DDR2_DRASR_INIT 0x0001
+#define CONFIG_SYS_DDR2_DROBS_INIT 0x0001
+#define CONFIG_SYS_DDR2_DROABA_INIT 0x0103
+#define CONFIG_SYS_DDR2_DRIBSODT1_INIT 0x003F
+#define CONFIG_SYS_DDR2_DROS_INIT 0x0001
+
+/*
+ * DRAM init sequence
+ */
+
+/* PALL Command */
+#define CONFIG_SYS_DDR2_INIT_DRIC1_1 0x0017
+#define CONFIG_SYS_DDR2_INIT_DRIC2_1 0x0400
+
+/* EMR(2) command */
+#define CONFIG_SYS_DDR2_INIT_DRIC1_2 0x0006
+#define CONFIG_SYS_DDR2_INIT_DRIC2_2 0x0000
+
+/* EMR(3) command */
+#define CONFIG_SYS_DDR2_INIT_DRIC1_3 0x0007
+#define CONFIG_SYS_DDR2_INIT_DRIC2_3 0x0000
+
+/* EMR(1) command */
+#define CONFIG_SYS_DDR2_INIT_DRIC1_4 0x0005
+#define CONFIG_SYS_DDR2_INIT_DRIC2_4 0x0000
+
+/* MRS command */
+#define CONFIG_SYS_DDR2_INIT_DRIC1_5 0x0004
+#define CONFIG_SYS_DDR2_INIT_DRIC2_5 0x0532
+
+/* PALL command */
+#define CONFIG_SYS_DDR2_INIT_DRIC1_6 0x0017
+#define CONFIG_SYS_DDR2_INIT_DRIC2_6 0x0400
+
+/* REF command 1 */
+#define CONFIG_SYS_DDR2_INIT_DRIC1_7 0x000f
+#define CONFIG_SYS_DDR2_INIT_DRIC2_7 0x0000
+
+/* MRS command */
+#define CONFIG_SYS_DDR2_INIT_DRIC1_8 0x0004
+#define CONFIG_SYS_DDR2_INIT_DRIC2_8 0x0432
+
+/* EMR(1) command */
+#define CONFIG_SYS_DDR2_INIT_DRIC1_9 0x0005
+#define CONFIG_SYS_DDR2_INIT_DRIC2_9 0x0380
+
+/* EMR(1) command */
+#define CONFIG_SYS_DDR2_INIT_DRIC1_10 0x0005
+#define CONFIG_SYS_DDR2_INIT_DRIC2_10 0x0002
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index e085f4a47c5..dbb25314399 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -3,7 +3,7 @@
* Stelian Pop <stelian.pop@leadtechdesign.com>
* Lead Tech Design <www.leadtechdesign.com>
*
- * (C) Copyright 2009
+ * (C) Copyright 2009-2010
* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
* esd electronic system design gmbh <www.esd.eu>
*
@@ -31,13 +31,12 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_AT91_LEGACY
-
/* Common stuff */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq */
#define CONFIG_MEESC 1 /* Board is esd MEESC */
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq */
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
#define CONFIG_PREBOOT /* enable preboot variable */
@@ -85,11 +84,11 @@
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_USB
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
/* LED */
#define CONFIG_AT91_LED 1
@@ -121,9 +120,9 @@
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
-
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */
@@ -133,6 +132,17 @@
#define CONFIG_NET_RETRY_COUNT 20
#undef CONFIG_RESET_PHY_R
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_CMD_FAT 1
+
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index 36488b32cd2..6ed9e75bb46 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -51,6 +51,9 @@
#define CONFIG_SYS_CLKDIV_PBA 2
#define CONFIG_SYS_CLKDIV_PBB 1
+/* Reserve VM regions for SDRAM, NOR flash and FRAM */
+#define CONFIG_SYS_NR_VM_REGIONS 3
+
/*
* The PLLOPT register controls the PLL like this:
* icp = PLLOPT<2>
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index ae5a7919d87..71553f9a08c 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -158,6 +158,7 @@
/*
* Board NAND Info.
*/
+#define CONFIG_SYS_NAND_QUIET_TEST 1
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
/* to access nand */
@@ -183,6 +184,7 @@
"loadaddr=0x82000000\0" \
"usbtty=cdc_acm\0" \
"console=ttyS2,115200n8\0" \
+ "mpurate=500\0" \
"vram=12M\0" \
"dvimode=1024x768MR-16@60\0" \
"defaultdisplay=dvi\0" \
@@ -191,6 +193,7 @@
"nandroot=/dev/mtdblock4 rw\0" \
"nandrootfstype=jffs2\0" \
"mmcargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
"omapfb.debug=y " \
@@ -198,6 +201,7 @@
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
"nandargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
"omapfb.debug=y " \
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 3a3b389614c..a0e0f248b21 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -129,6 +129,7 @@
/*
* Board NAND Info.
*/
+#define CONFIG_SYS_NAND_QUIET_TEST 1
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
/* to access nand */
@@ -153,6 +154,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyS2,115200n8\0" \
+ "mpurate=500\0" \
"vram=12M\0" \
"dvimode=1024x768MR-16@60\0" \
"defaultdisplay=dvi\0" \
@@ -161,6 +163,7 @@
"nandroot=/dev/mtdblock4 rw\0" \
"nandrootfstype=jffs2\0" \
"mmcargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
"omapfb.debug=y " \
@@ -168,6 +171,7 @@
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
"nandargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
"omapfb.debug=y " \
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index fb0f576f456..4a1cedec0fe 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -35,6 +35,7 @@
#define CONFIG_OTC570 1 /* Board is esd OTC570 */
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
#define CONFIG_SYS_HZ 1000 /* decrementer freq */
#define CONFIG_DISPLAY_BOARDINFO 1
#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index c8ea8fda82b..dc01ceb7b26 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -30,7 +30,7 @@
/* High Level Configuration Options */
#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
-#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */
+#define CONFIG_S5P 1 /* which is in a S5P Family */
#define CONFIG_S5PC110 1 /* which is in a S5PC110 */
#define CONFIG_MACH_GONI 1 /* working with Goni */
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 76a47c4456f..595d1740013 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -34,7 +34,7 @@
*/
#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
-#define CONFIG_S5PC1XX 1 /* which is in a S5PC1XX Family */
+#define CONFIG_S5P 1 /* which is in a S5P Family */
#define CONFIG_S5PC100 1 /* which is in a S5PC100 */
#define CONFIG_SMDKC100 1 /* working with SMDKC100 */
diff --git a/include/mmc.h b/include/mmc.h
index fcb237e81e4..9f94f423fbf 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -179,6 +179,16 @@ struct mmc_cid {
char pnm[7];
};
+/*
+ * WARNING!
+ *
+ * This structure is used by atmel_mci.c only.
+ * It works for the AVR32 architecture but NOT
+ * for ARM/AT91 architectures.
+ * Its use is highly depreciated.
+ * After the atmel_mci.c driver for AVR32 has
+ * been replaced this structure will be removed.
+ */
struct mmc_csd
{
u8 csd_structure:2,
@@ -275,7 +285,10 @@ int mmc_set_dev(int dev_num);
void print_mmc_devices(char separator);
int board_mmc_getcd(u8 *cd, struct mmc *mmc);
-#ifndef CONFIG_GENERIC_MMC
+#ifdef CONFIG_GENERIC_MMC
+int atmel_mci_init(void *regs);
+#else
int mmc_legacy_init(int verbose);
#endif
+
#endif /* _MMC_H_ */
diff --git a/include/serial.h b/include/serial.h
index 6513d8eeef9..15ab73c13d9 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -25,9 +25,9 @@ extern struct serial_device * default_serial_console (void);
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \
- defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC83xx) || \
- defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
- defined(CONFIG_SYS_SC520)
+ defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \
+ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
+ defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520)
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
#if defined(CONFIG_SYS_NS16550_SERIAL)
@@ -52,7 +52,7 @@ extern struct serial_device s3c24xx_serial1_device;
extern struct serial_device s3c24xx_serial2_device;
#endif
-#if defined(CONFIG_S5PC1XX)
+#if defined(CONFIG_S5P)
extern struct serial_device s5p_serial0_device;
extern struct serial_device s5p_serial1_device;
extern struct serial_device s5p_serial2_device;
diff --git a/include/twl4030.h b/include/twl4030.h
index 2b2f5ae6cde..930c285c26f 100644
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -304,6 +304,17 @@
#define TWL4030_PM_RECEIVER_MAINREF_TYPE 0xF0
#define TWL4030_PM_RECEIVER_MAINREF_REMAP 0xF1
+/* Voltage Selection in PM Receiver Module */
+#define TWL4030_PM_RECEIVER_VAUX2_VSEL_18 0x05
+#define TWL4030_PM_RECEIVER_VAUX3_VSEL_28 0x03
+#define TWL4030_PM_RECEIVER_VPLL2_VSEL_18 0x05
+#define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03
+#define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02
+
+/* Device Selection in PM Receiver Module */
+#define TWL4030_PM_RECEIVER_DEV_GRP_P1 0x20
+#define TWL4030_PM_RECEIVER_DEV_GRP_ALL 0xE0
+
/* LED */
#define TWL4030_LED_LEDEN 0xEE
#define TWL4030_LED_LEDEN_LEDAON (1 << 0)
@@ -500,6 +511,9 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
/* For hardware resetting */
void twl4030_power_reset_init(void);
+/* For setting device group and voltage */
+void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
+ u8 dev_grp, u8 dev_grp_sel);
/* For initializing power device */
void twl4030_power_init(void);
/* For initializing mmc power */
diff --git a/tools/Makefile b/tools/Makefile
index 749d9942309..b2e73b2ccc5 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -118,6 +118,9 @@ endif
ifeq ($(VENDOR),ronetix)
LOGO_BMP= logos/ronetix.bmp
endif
+ifeq ($(VENDOR),syteco)
+LOGO_BMP= logos/syteco.bmp
+endif
# now $(obj) is defined
HOSTSRCS += $(addprefix $(SRCTREE)/,$(EXT_OBJ_FILES-y:.o=.c))
diff --git a/tools/logos/syteco.bmp b/tools/logos/syteco.bmp
new file mode 100644
index 00000000000..9a994fe3e38
--- /dev/null
+++ b/tools/logos/syteco.bmp
Binary files differ