diff options
103 files changed, 2394 insertions, 1262 deletions
@@ -1074,6 +1074,28 @@ The following options need to be configured: and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP or CONFIG_VIDEO_SED13806_16BPP + CONFIG_FSL_DIU_FB + Enable the Freescale DIU video driver. Reference boards for + SOCs that have a DIU should define this macro to enable DIU + support, and should also define these other macros: + + CONFIG_SYS_DIU_ADDR + CONFIG_VIDEO + CONFIG_CMD_BMP + CONFIG_CFB_CONSOLE + CONFIG_VIDEO_SW_CURSOR + CONFIG_VGA_AS_SINGLE_DEVICE + CONFIG_VIDEO_LOGO + CONFIG_VIDEO_BMP_LOGO + + The DIU driver will look for the 'monitor' environment variable, + and if defined, enable the DIU as a console during boot. This + variable should be set to one of these values: + + '0' Output video to the DVI connector + '1' Output video to the LVDS connector + '2' Output video to the Dual-Link LVDS connector + - Keyboard Support: CONFIG_KEYBOARD diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index cbb0fc6bbd9..d61d34c905b 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -55,9 +55,13 @@ COBJS-$(CONFIG_P1011) += ddr-gen3.o COBJS-$(CONFIG_P1012) += ddr-gen3.o COBJS-$(CONFIG_P1013) += ddr-gen3.o COBJS-$(CONFIG_P1014) += ddr-gen3.o +COBJS-$(CONFIG_P1015) += ddr-gen3.o +COBJS-$(CONFIG_P1016) += ddr-gen3.o COBJS-$(CONFIG_P1020) += ddr-gen3.o COBJS-$(CONFIG_P1021) += ddr-gen3.o COBJS-$(CONFIG_P1022) += ddr-gen3.o +COBJS-$(CONFIG_P1024) += ddr-gen3.o +COBJS-$(CONFIG_P1025) += ddr-gen3.o COBJS-$(CONFIG_P2010) += ddr-gen3.o COBJS-$(CONFIG_P2020) += ddr-gen3.o COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o @@ -69,7 +73,7 @@ COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-$(CONFIG_FSL_CORENET) += liodn.o COBJS-$(CONFIG_MP) += mp.o COBJS-$(CONFIG_PCI) += pci.o -COBJS-$(CONFIG_FSL_CORENET) += portals.o +COBJS-$(CONFIG_SYS_DPAA_QBMAN) += portals.o # various SoC specific assignments COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o @@ -87,12 +91,20 @@ COBJS-$(CONFIG_MPC8548) += mpc8548_serdes.o COBJS-$(CONFIG_MPC8568) += mpc8568_serdes.o COBJS-$(CONFIG_MPC8569) += mpc8569_serdes.o COBJS-$(CONFIG_MPC8572) += mpc8572_serdes.o +COBJS-$(CONFIG_P1010) += p1010_serdes.o COBJS-$(CONFIG_P1011) += p1021_serdes.o COBJS-$(CONFIG_P1012) += p1021_serdes.o COBJS-$(CONFIG_P1013) += p1022_serdes.o +COBJS-$(CONFIG_P1014) += p1010_serdes.o +COBJS-$(CONFIG_P1015) += p1021_serdes.o +COBJS-$(CONFIG_P1016) += p1021_serdes.o +COBJS-$(CONFIG_P1017) += p1023_serdes.o COBJS-$(CONFIG_P1020) += p1021_serdes.o COBJS-$(CONFIG_P1021) += p1021_serdes.o COBJS-$(CONFIG_P1022) += p1022_serdes.o +COBJS-$(CONFIG_P1023) += p1023_serdes.o +COBJS-$(CONFIG_P1024) += p1021_serdes.o +COBJS-$(CONFIG_P1025) += p1021_serdes.o COBJS-$(CONFIG_P2010) += p2020_serdes.o COBJS-$(CONFIG_P2020) += p2020_serdes.o COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 1aad2ba9255..49ea6cc7523 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -33,6 +33,7 @@ #include <asm/cache.h> #include <asm/io.h> #include <asm/mmu.h> +#include <asm/fsl_ifc.h> #include <asm/fsl_law.h> #include <asm/fsl_lbc.h> #include <post.h> @@ -280,7 +281,8 @@ int cpu_mmc_init(bd_t *bis) /* * Print out the state of various machine registers. - * Currently prints out LAWs, BR0/OR0, and TLBs + * Currently prints out LAWs, BR0/OR0 for LBC, CSPR/CSOR/Timing + * parameters for IFC and TLBs */ void mpc85xx_reginfo(void) { @@ -289,6 +291,9 @@ void mpc85xx_reginfo(void) #if defined(CONFIG_FSL_LBC) print_lbc_regs(); #endif +#ifdef CONFIG_FSL_IFC + print_ifc_regs(); +#endif } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 8ece9700972..5642cd7b051 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -37,6 +37,10 @@ #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> #include "mp.h" +#ifdef CONFIG_SYS_QE_FW_IN_NAND +#include <nand.h> +#include <errno.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -384,12 +388,6 @@ int cpu_init_r(void) enable_cpc(); -#ifdef CONFIG_QE - uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */ - qe_init(qe_base); - qe_reset(); -#endif - /* needs to be in ram since code uses global static vars */ fsl_serdes_init(); @@ -449,3 +447,25 @@ int sata_initialize(void) return 1; } #endif + +void cpu_secondary_init_r(void) +{ +#ifdef CONFIG_QE + uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */ +#ifdef CONFIG_SYS_QE_FW_IN_NAND + int ret; + size_t fw_length = CONFIG_SYS_QE_FW_LENGTH; + + /* load QE firmware from NAND flash to DDR first */ + ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FW_IN_NAND, + &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR); + + if (ret && ret == -EUCLEAN) { + printf ("NAND read for QE firmware at offset %x failed %d\n", + CONFIG_SYS_QE_FW_IN_NAND, ret); + } +#endif + qe_init(qe_base); + qe_reset(); +#endif +} diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 00fa7529965..642f6c54bdf 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -338,6 +338,9 @@ void fdt_add_enet_stashing(void *fdt) do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1); do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1); + do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1); + do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1); + do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1); } #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME) @@ -483,4 +486,13 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_SRIO ft_srio_setup(blob); #endif + + /* + * system-clock = CCB clock/2 + * Here gd->bus_clk = CCB clock + * We are using the system clock as 1588 Timer reference + * clock source select + */ + do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer", + "timer-frequency", gd->bus_clk/2, 1); } diff --git a/arch/powerpc/cpu/mpc85xx/p1010_serdes.c b/arch/powerpc/cpu/mpc85xx/p1010_serdes.c new file mode 100644 index 00000000000..e8a0387ca0a --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p1010_serdes.c @@ -0,0 +1,75 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Author: Prabhakar Kushwaha <prabhakar@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 +#define SRDS2_MAX_LANES 2 + +static u32 serdes1_prtcl_map, serdes2_prtcl_map; + +static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x00] = {NONE, NONE, NONE, NONE}, + [0x01] = {PCIE1, PCIE2, SGMII_TSEC2, SGMII_TSEC3}, + [0x02] = {PCIE1, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3}, + [0x03] = {NONE, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3}, +}; + +static const u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { + [0x00] = {NONE, NONE}, + [0x01] = {SATA1, SATA2}, + [0x02] = {SATA1, SATA2}, + [0x03] = {PCIE1, PCIE2}, +}; + + +int is_serdes_configured(enum srds_prtcl device) +{ + int ret = (1 << device) & serdes1_prtcl_map; + + if (ret) + return ret; + + return (1 << device) & serdes2_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + + if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane]; + serdes2_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/p1023_serdes.c b/arch/powerpc/cpu/mpc85xx/p1023_serdes.c new file mode 100644 index 00000000000..c8ab5d6f339 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p1023_serdes.c @@ -0,0 +1,53 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Author: Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x00] = {PCIE1, PCIE2, NONE, NONE}, + [0x01] = {PCIE1, PCIE2, PCIE3, NONE}, + [0x02] = {PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC2}, + [0x03] = {PCIE1, PCIE2, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2}, +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + int ret = (1 << device) & serdes1_prtcl_map; + return ret; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + +} diff --git a/arch/powerpc/cpu/mpc85xx/p3041_ids.c b/arch/powerpc/cpu/mpc85xx/p3041_ids.c index febbee95bab..1255898483b 100644 --- a/arch/powerpc/cpu/mpc85xx/p3041_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p3041_ids.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -52,10 +52,10 @@ struct liodn_id_table liodn_tbl[] = { SET_SATA_LIODN(1, 127), SET_SATA_LIODN(2, 128), - SET_PCI_LIODN(1, 193), - SET_PCI_LIODN(2, 194), - SET_PCI_LIODN(3, 195), - SET_PCI_LIODN(4, 196), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 3, 195), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 4, 196), SET_DMA_LIODN(1, 197), SET_DMA_LIODN(2, 198), diff --git a/arch/powerpc/cpu/mpc85xx/p4080_ids.c b/arch/powerpc/cpu/mpc85xx/p4080_ids.c index df2504802a0..fd155c89e0b 100644 --- a/arch/powerpc/cpu/mpc85xx/p4080_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p4080_ids.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -44,9 +44,9 @@ struct liodn_id_table liodn_tbl[] = { SET_SDHC_LIODN(1, 156), - SET_PCI_LIODN(1, 193), - SET_PCI_LIODN(2, 194), - SET_PCI_LIODN(3, 195), + SET_PCI_LIODN("fsl,p4080-pcie", 1, 193), + SET_PCI_LIODN("fsl,p4080-pcie", 2, 194), + SET_PCI_LIODN("fsl,p4080-pcie", 3, 195), SET_DMA_LIODN(1, 196), SET_DMA_LIODN(2, 197), diff --git a/arch/powerpc/cpu/mpc85xx/p5020_ids.c b/arch/powerpc/cpu/mpc85xx/p5020_ids.c index febbee95bab..1255898483b 100644 --- a/arch/powerpc/cpu/mpc85xx/p5020_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p5020_ids.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -52,10 +52,10 @@ struct liodn_id_table liodn_tbl[] = { SET_SATA_LIODN(1, 127), SET_SATA_LIODN(2, 128), - SET_PCI_LIODN(1, 193), - SET_PCI_LIODN(2, 194), - SET_PCI_LIODN(3, 195), - SET_PCI_LIODN(4, 196), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 3, 195), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 4, 196), SET_DMA_LIODN(1, 197), SET_DMA_LIODN(2, 198), diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c index 01aec6e794e..e8d53bb2fd0 100644 --- a/arch/powerpc/cpu/mpc85xx/portals.c +++ b/arch/powerpc/cpu/mpc85xx/portals.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -30,18 +30,13 @@ #include <asm/fsl_portals.h> #include <asm/fsl_liodn.h> -static ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_CORENET_QMAN_ADDR; +static ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_QMAN_ADDR; void setup_portals(void) { +#ifdef CONFIG_FSL_CORENET int i; - /* Set the Qman initiator BAR to match the LAW (for DQRR stashing) */ -#ifdef CONFIG_PHYS_64BIT - out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32)); -#endif - out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS); - for (i = 0; i < CONFIG_SYS_QMAN_NUM_PORTALS; i++) { u8 sdest = qp_info[i].sdest; u16 fliodn = qp_info[i].fliodn; @@ -53,6 +48,13 @@ void setup_portals(void) /* set frame liodn */ out_be32(&qman->qcsp[i].qcsp_io_cfg, (sdest << 16) | fliodn); } +#endif + + /* Set the Qman initiator BAR to match the LAW (for DQRR stashing) */ +#ifdef CONFIG_PHYS_64BIT + out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32)); +#endif + out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS); } /* Update portal containter to match LAW setup of portal in phy map */ @@ -118,9 +120,12 @@ void fdt_portal(void *blob, const char *compat, const char *container, static int fdt_qportal(void *blob, int off, int id, char *name, enum fsl_dpaa_dev dev, int create) { - int childoff, dev_off, num, ret = 0; + int childoff, dev_off, ret = 0; uint32_t dev_handle; +#ifdef CONFIG_FSL_CORENET + int num; u32 liodns[2]; +#endif childoff = fdt_subnode_offset(blob, off, name); if (create) { @@ -154,9 +159,11 @@ static int fdt_qportal(void *blob, int off, int id, char *name, if (ret < 0) return ret; +#ifdef CONFIG_FSL_CORENET num = get_dpaa_liodn(dev, &liodns[0], id); ret = fdt_setprop(blob, childoff, "fsl,liodn", &liodns[0], sizeof(u32) * num); +#endif } else { return childoff; } @@ -184,7 +191,9 @@ void fdt_fixup_qportals(void *blob) off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal"); while (off != -FDT_ERR_NOTFOUND) { +#ifdef CONFIG_FSL_CORENET u32 liodns[2]; +#endif const int *ci = fdt_getprop(blob, off, "cell-index", NULL); int j, i = *ci; @@ -192,6 +201,7 @@ void fdt_fixup_qportals(void *blob) if (err < 0) goto err; +#ifdef CONFIG_FSL_CORENET liodns[0] = qp_info[i].dliodn; liodns[1] = qp_info[i].fliodn; @@ -199,6 +209,7 @@ void fdt_fixup_qportals(void *blob) &liodns, sizeof(u32) * 2); if (err < 0) goto err; +#endif i++; @@ -207,6 +218,7 @@ void fdt_fixup_qportals(void *blob) if (err < 0) goto err; +#ifdef CONFIG_FSL_CORENET #ifdef CONFIG_SYS_DPAA_PME err = fdt_qportal(blob, off, i, "pme@0", FSL_HW_PORTAL_PME, 1); if (err < 0) @@ -214,6 +226,8 @@ void fdt_fixup_qportals(void *blob) #else fdt_qportal(blob, off, i, "pme@0", FSL_HW_PORTAL_PME, 0); #endif +#endif + #ifdef CONFIG_SYS_DPAA_FMAN for (j = 0; j < CONFIG_SYS_NUM_FMAN; j++) { char name[] = "fman@0"; diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index f2aa8d039d6..e530494102b 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -107,25 +107,45 @@ void get_sys_info (sys_info_t * sysInfo) #define PME_CLK_SEL 0x80000000 #define FM1_CLK_SEL 0x40000000 #define FM2_CLK_SEL 0x20000000 +#define HWA_ASYNC_DIV 0x04000000 +#if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2) +#define HWA_CC_PLL 1 +#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4) +#define HWA_CC_PLL 2 +#else +#error CONFIG_SYS_FSL_NUM_CC_PLLS not set or unknown case +#endif rcw_tmp = in_be32(&gur->rcwsr[7]); #ifdef CONFIG_SYS_DPAA_PME - if (rcw_tmp & PME_CLK_SEL) - sysInfo->freqPME = freqCC_PLL[2] / 2; - else + if (rcw_tmp & PME_CLK_SEL) { + if (rcw_tmp & HWA_ASYNC_DIV) + sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 4; + else + sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 2; + } else { sysInfo->freqPME = sysInfo->freqSystemBus / 2; + } #endif #ifdef CONFIG_SYS_DPAA_FMAN - if (rcw_tmp & FM1_CLK_SEL) - sysInfo->freqFMan[0] = freqCC_PLL[2] / 2; - else + if (rcw_tmp & FM1_CLK_SEL) { + if (rcw_tmp & HWA_ASYNC_DIV) + sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 4; + else + sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 2; + } else { sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + } #if (CONFIG_SYS_NUM_FMAN) == 2 - if (rcw_tmp & FM2_CLK_SEL) - sysInfo->freqFMan[1] = freqCC_PLL[2] / 2; - else + if (rcw_tmp & FM2_CLK_SEL) { + if (rcw_tmp & HWA_ASYNC_DIV) + sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 4; + else + sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 2; + } else { sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + } #endif #endif @@ -162,7 +182,6 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif -#endif #ifdef CONFIG_QE qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO) @@ -170,6 +189,12 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ; #endif +#ifdef CONFIG_SYS_DPAA_FMAN + sysInfo->freqFMan[0] = sysInfo->freqSystemBus; +#endif + +#endif /* CONFIG_FSL_CORENET */ + #if defined(CONFIG_FSL_LBC) #if defined(CONFIG_SYS_LBC_LCRR) /* We will program LCRR to this value later */ @@ -254,7 +279,8 @@ int get_clocks (void) gd->i2c2_clk = gd->i2c1_clk; #if defined(CONFIG_FSL_ESDHC) -#ifdef CONFIG_MPC8569 +#if defined(CONFIG_MPC8569) || defined(CONFIG_P1010) ||\ + defined(CONFIG_P1014) gd->sdhc_clk = gd->bus_clk; #else gd->sdhc_clk = gd->bus_clk / 2; diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 31143ba5300..295f175bba6 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -55,6 +55,7 @@ void init_tlbs(void) return ; } +#ifndef CONFIG_NAND_SPL void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, phys_addr_t *rpn) { @@ -73,7 +74,6 @@ void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, #endif } -#ifndef CONFIG_NAND_SPL void print_tlbcam(void) { int i; diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index 5dfd65b8824..4ae26e42104 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -15,6 +15,7 @@ COBJS-y += cpu.o endif COBJS-$(CONFIG_OF_LIBFDT) += fdt.o +COBJS-$(CONFIG_FSL_IFC) += fsl_ifc.o COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o COBJS-$(CONFIG_SYS_SRIO) += srio.o diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 4335fb4f31f..39b304ae99b 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -71,15 +71,27 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P1012, P1012, 1), CPU_TYPE_ENTRY(P1012, P1012_E, 1), CPU_TYPE_ENTRY(P1013, P1013, 1), + CPU_TYPE_ENTRY(P1013, P1013_E, 1), CPU_TYPE_ENTRY(P1014, P1014_E, 1), CPU_TYPE_ENTRY(P1014, P1014, 1), - CPU_TYPE_ENTRY(P1013, P1013_E, 1), + CPU_TYPE_ENTRY(P1015, P1015_E, 1), + CPU_TYPE_ENTRY(P1015, P1015, 1), + CPU_TYPE_ENTRY(P1016, P1016_E, 1), + CPU_TYPE_ENTRY(P1016, P1016, 1), + CPU_TYPE_ENTRY(P1017, P1017, 1), + CPU_TYPE_ENTRY(P1017, P1017, 1), CPU_TYPE_ENTRY(P1020, P1020, 2), CPU_TYPE_ENTRY(P1020, P1020_E, 2), CPU_TYPE_ENTRY(P1021, P1021, 2), CPU_TYPE_ENTRY(P1021, P1021_E, 2), CPU_TYPE_ENTRY(P1022, P1022, 2), CPU_TYPE_ENTRY(P1022, P1022_E, 2), + CPU_TYPE_ENTRY(P1023, P1023, 2), + CPU_TYPE_ENTRY(P1023, P1023_E, 2), + CPU_TYPE_ENTRY(P1024, P1024, 2), + CPU_TYPE_ENTRY(P1024, P1024_E, 2), + CPU_TYPE_ENTRY(P1025, P1025, 2), + CPU_TYPE_ENTRY(P1025, P1025_E, 2), CPU_TYPE_ENTRY(P2010, P2010, 1), CPU_TYPE_ENTRY(P2010, P2010_E, 1), CPU_TYPE_ENTRY(P2020, P2020, 2), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index cefabe769fb..02d069c9ec6 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -236,7 +236,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, * tAXPD=1, need design to confirm. */ int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */ - unsigned int data_rate = fsl_ddr_get_mem_data_rate(); + unsigned int data_rate = get_ddr_freq(0); tmrd_mclk = 4; /* set the turnaround time */ trwt_mclk = 1; @@ -1305,7 +1305,7 @@ static void set_ddr_eor(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) { if (popts->addr_hash) { ddr->ddr_eor = 0x40000000; /* address hash enable */ - puts("Addess hashing enabled.\n"); + puts("Address hashing enabled.\n"); } } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h index c7c12c1c2f6..1e866fe0353 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h @@ -80,5 +80,4 @@ extern void check_interleaving_options(fsl_ddr_info_t *pinfo); extern unsigned int mclk_to_picos(unsigned int mclk); extern unsigned int get_memory_clk_period_ps(void); extern unsigned int picos_to_mclk(unsigned int picos); -extern unsigned int fsl_ddr_get_mem_data_rate(void); #endif diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c index dcb37cea1f9..b565e338ad3 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c @@ -250,24 +250,27 @@ ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd, pdimm->primary_sdram_width = spd->primw; pdimm->ec_sdram_width = spd->ecw; - /* FIXME: what about registered SO-DIMM? */ + /* These are all the types defined by the JEDEC DDR2 SPD 1.3 spec */ switch (spd->dimm_type) { - case 0x01: /* RDIMM */ - case 0x10: /* Mini-RDIMM */ - pdimm->registered_dimm = 1; /* register buffered */ + case DDR2_SPD_DIMMTYPE_RDIMM: + case DDR2_SPD_DIMMTYPE_72B_SO_RDIMM: + case DDR2_SPD_DIMMTYPE_MINI_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; break; - case 0x02: /* UDIMM */ - case 0x04: /* SO-DIMM */ - case 0x08: /* Micro-DIMM */ - case 0x20: /* Mini-UDIMM */ - pdimm->registered_dimm = 0; /* unbuffered */ + case DDR2_SPD_DIMMTYPE_UDIMM: + case DDR2_SPD_DIMMTYPE_SO_DIMM: + case DDR2_SPD_DIMMTYPE_MICRO_DIMM: + case DDR2_SPD_DIMMTYPE_MINI_UDIMM: + /* Unbuffered DIMMs */ + pdimm->registered_dimm = 0; break; + case DDR2_SPD_DIMMTYPE_72B_SO_CDIMM: default: printf("unknown dimm_type 0x%02X\n", spd->dimm_type); return 1; - break; } /* SDRAM device parameters */ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c index 29cea53266b..756b15f7ab0 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c @@ -128,24 +128,32 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, pdimm->data_width = pdimm->primary_sdram_width + pdimm->ec_sdram_width; - switch (spd->module_type & 0xf) { - case 0x01: /* RDIMM */ - case 0x05: /* Mini-RDIMM */ - pdimm->registered_dimm = 1; /* register buffered */ + /* These are the types defined by the JEDEC DDR3 SPD spec */ + pdimm->mirrored_dimm = 0; + pdimm->registered_dimm = 0; + switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) { + case DDR3_SPD_MODULETYPE_RDIMM: + case DDR3_SPD_MODULETYPE_MINI_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; for (i = 0; i < 16; i += 2) { - pdimm->rcw[i] = spd->mod_section.registered.rcw[i/2] & 0x0F; - pdimm->rcw[i+1] = (spd->mod_section.registered.rcw[i/2] >> 4) & 0x0F; + u8 rcw = spd->mod_section.registered.rcw[i/2]; + pdimm->rcw[i] = (rcw >> 0) & 0x0F; + pdimm->rcw[i+1] = (rcw >> 4) & 0x0F; } break; - case 0x02: /* UDIMM */ - case 0x03: /* SO-DIMM */ - case 0x04: /* Micro-DIMM */ - case 0x06: /* Mini-UDIMM */ - pdimm->registered_dimm = 0; /* unbuffered */ + + case DDR3_SPD_MODULETYPE_UDIMM: + case DDR3_SPD_MODULETYPE_SO_DIMM: + case DDR3_SPD_MODULETYPE_MICRO_DIMM: + case DDR3_SPD_MODULETYPE_MINI_UDIMM: + /* Unbuffered DIMMs */ + if (spd->mod_section.unbuffered.addr_mapping & 0x1) + pdimm->mirrored_dimm = 1; break; default: - printf("unknown dimm_type 0x%02X\n", spd->module_type); + printf("unknown module_type 0x%02X\n", spd->module_type); return 1; } @@ -303,16 +311,5 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, pdimm->tFAW_ps = (((spd->tFAW_msb & 0xf) << 8) | spd->tFAW_min) * mtb_ps; - /* - * We need check the address mirror for unbuffered DIMM - * If SPD indicate the address map mirror, The DDR controller - * need care it. - */ - if ((spd->module_type == SPD_MODULETYPE_UDIMM) || - (spd->module_type == SPD_MODULETYPE_SODIMM) || - (spd->module_type == SPD_MODULETYPE_MICRODIMM) || - (spd->module_type == SPD_MODULETYPE_MINIUDIMM)) - pdimm->mirrored_dimm = spd->mod_section.unbuffered.addr_mapping & 0x1; - return 0; } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 8b31ec0cfae..00f3d6c600a 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -207,10 +207,15 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, temp1 = temp2 = 0; for (i = 0; i < number_of_dimms; i++) { if (dimm_params[i].n_ranks) { - if (dimm_params[i].registered_dimm) + if (dimm_params[i].registered_dimm) { temp1 = 1; - if (!dimm_params[i].registered_dimm) + printf("Detected RDIMM %s\n", + dimm_params[i].mpart); + } else { temp2 = 1; + printf("Detected UDIMM %s\n", + dimm_params[i].mpart); + } } } @@ -218,10 +223,8 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, outpdimm->all_DIMMs_unbuffered = 0; if (temp1 && !temp2) { outpdimm->all_DIMMs_registered = 1; - printf("Detected RDIMM(s)\n"); } else if (!temp1 && temp2) { outpdimm->all_DIMMs_unbuffered = 1; - printf("Detected UDIMM(s)\n"); } else { printf("ERROR: Mix of registered buffered and unbuffered " "DIMMs detected!\n"); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index bb96d66a9df..c8fa123539d 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -13,6 +13,7 @@ */ #include <common.h> +#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include "ddr.h" @@ -26,9 +27,65 @@ extern void fsl_ddr_set_lawbar( extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num); -/* Board-specific functions defined in each board's ddr.c */ -extern void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num); +#if defined(SPD_EEPROM_ADDRESS) || \ + defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \ + defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4) +#if (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS, +}; +#endif +#if (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ + [1][0] = SPD_EEPROM_ADDRESS2, /* controller 2 */ +}; +#endif +#if (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ + [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */ + [1][0] = SPD_EEPROM_ADDRESS3, /* controller 2 */ + [1][1] = SPD_EEPROM_ADDRESS4, /* controller 2 */ +}; +#endif + +static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) +{ + int ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, + sizeof(generic_spd_eeprom_t)); + + if (ret) { + printf("DDR: failed to read SPD from address %u\n", i2c_address); + memset(spd, 0, sizeof(generic_spd_eeprom_t)); + } +} + +__attribute__((weak, alias("__get_spd"))) +void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address); + +void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + unsigned int i2c_address = 0; + + if (ctrl_num >= CONFIG_NUM_DDR_CONTROLLERS) { + printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); + return; + } + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + i2c_address = spd_i2c_addr[ctrl_num][i]; + get_spd(&(ctrl_dimms_spd[i]), i2c_address); + } +} +#else +void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ +} +#endif /* SPD_EEPROM_ADDRESSx */ /* * ASSUMPTIONS: diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c index 1e2d921286e..02908b4561f 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -8,10 +8,16 @@ #include <common.h> #include <asm/fsl_law.h> +#include <div64.h> #include "ddr.h" -unsigned int fsl_ddr_get_mem_data_rate(void); +/* To avoid 64-bit full-divides, we factor this here */ +#define ULL_2e12 2000000000000ULL +#define UL_5pow12 244140625UL +#define UL_2pow13 (1UL << 13) + +#define ULL_8Fs 0xFFFFFFFFULL /* * Round mclk_ps to nearest 10 ps in memory controller code. @@ -22,35 +28,51 @@ unsigned int fsl_ddr_get_mem_data_rate(void); */ unsigned int get_memory_clk_period_ps(void) { - unsigned int mclk_ps; + unsigned int data_rate = get_ddr_freq(0); + unsigned int result; + + /* Round to nearest 10ps, being careful about 64-bit multiply/divide */ + unsigned long long mclk_ps = ULL_2e12; + + /* Add 5*data_rate, for rounding */ + mclk_ps += 5*(unsigned long long)data_rate; - mclk_ps = 2000000000000ULL / fsl_ddr_get_mem_data_rate(); - /* round to nearest 10 ps */ - return 10 * ((mclk_ps + 5) / 10); + /* Now perform the big divide, the result fits in 32-bits */ + do_div(mclk_ps, data_rate); + result = mclk_ps; + + /* We still need to round to 10ps */ + return 10 * (result/10); } /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */ unsigned int picos_to_mclk(unsigned int picos) { - const unsigned long long ULL_2e12 = 2000000000000ULL; - const unsigned long long ULL_8Fs = 0xFFFFFFFFULL; - unsigned long long clks; - unsigned long long clks_temp; + unsigned long long clks, clks_rem; + /* Short circuit for zero picos */ if (!picos) return 0; - clks = fsl_ddr_get_mem_data_rate() * (unsigned long long) picos; - clks_temp = clks; - clks = clks / ULL_2e12; - if (clks_temp % ULL_2e12) { + /* First multiply the time by the data rate (32x32 => 64) */ + clks = picos * (unsigned long long)get_ddr_freq(0); + + /* + * Now divide by 5^12 and track the 32-bit remainder, then divide + * by 2*(2^12) using shifts (and updating the remainder). + */ + clks_rem = do_div(clks, UL_5pow12); + clks_rem <<= 13; + clks_rem |= clks & (UL_2pow13-1); + clks >>= 13; + + /* If we had a remainder, then round up */ + if (clks_rem) clks++; - } - if (clks > ULL_8Fs) { + /* Clamp to the maximum representable value */ + if (clks > ULL_8Fs) clks = ULL_8Fs; - } - return (unsigned int) clks; } @@ -141,6 +163,8 @@ void board_add_ram_info(int use_default) if (sdram_cfg & SDRAM_CFG_32_BE) puts(", 32-bit"); + else if (sdram_cfg & SDRAM_CFG_16_BE) + puts(", 16-bit"); else puts(", 64-bit"); diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c new file mode 100644 index 00000000000..39a455638ff --- /dev/null +++ b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c @@ -0,0 +1,84 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Author: Dipen Dudhat <dipen.dudhat@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_ifc.h> + +void print_ifc_regs(void) +{ + int i, j; + + printf("IFC Controller Registers\n"); + for (i = 0; i < FSL_IFC_BANK_COUNT; i++) { + printf("CSPR%d:0x%08X\tAMASK%d:0x%08X\tCSOR%d:0x%08X\n", + i, get_ifc_cspr(i), i, get_ifc_amask(i), + i, get_ifc_csor(i)); + for (j = 0; j < 4; j++) + printf("IFC_FTIM%d:0x%08X\n", j, get_ifc_ftim(i, j)); + } +} + +void init_early_memctl_regs(void) +{ +#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0) + set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0); + set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0); + set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0); + + set_ifc_ftim(IFC_CS0, IFC_FTIM0, CONFIG_SYS_CS0_FTIM0); + set_ifc_ftim(IFC_CS0, IFC_FTIM1, CONFIG_SYS_CS0_FTIM1); + set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2); + set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3); +#endif + +#if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1) + set_ifc_csor(IFC_CS1, CONFIG_SYS_CSOR1); + set_ifc_amask(IFC_CS1, CONFIG_SYS_AMASK1); + set_ifc_cspr(IFC_CS1, CONFIG_SYS_CSPR1); + + set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0); + set_ifc_ftim(IFC_CS1, IFC_FTIM1, CONFIG_SYS_CS1_FTIM1); + set_ifc_ftim(IFC_CS1, IFC_FTIM2, CONFIG_SYS_CS1_FTIM2); + set_ifc_ftim(IFC_CS1, IFC_FTIM3, CONFIG_SYS_CS1_FTIM3); +#endif + +#if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2) + set_ifc_csor(IFC_CS2, CONFIG_SYS_CSOR2); + set_ifc_amask(IFC_CS2, CONFIG_SYS_AMASK2); + set_ifc_cspr(IFC_CS2, CONFIG_SYS_CSPR2); + + set_ifc_ftim(IFC_CS2, IFC_FTIM0, CONFIG_SYS_CS2_FTIM0); + set_ifc_ftim(IFC_CS2, IFC_FTIM1, CONFIG_SYS_CS2_FTIM1); + set_ifc_ftim(IFC_CS2, IFC_FTIM2, CONFIG_SYS_CS2_FTIM2); + set_ifc_ftim(IFC_CS2, IFC_FTIM3, CONFIG_SYS_CS2_FTIM3); + +#endif + +#if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3) + set_ifc_cspr(IFC_CS3, CONFIG_SYS_CSPR3); + set_ifc_amask(IFC_CS3, CONFIG_SYS_AMASK3); + set_ifc_csor(IFC_CS3, CONFIG_SYS_CSOR3); + + set_ifc_ftim(IFC_CS3, IFC_FTIM0, CONFIG_SYS_CS3_FTIM0); + set_ifc_ftim(IFC_CS3, IFC_FTIM1, CONFIG_SYS_CS3_FTIM1); + set_ifc_ftim(IFC_CS3, IFC_FTIM2, CONFIG_SYS_CS3_FTIM2); + set_ifc_ftim(IFC_CS3, IFC_FTIM3, CONFIG_SYS_CS3_FTIM3); +#endif +} diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index 2b6b233ba68..536f1423313 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -75,8 +75,10 @@ /* Since so many PPC SOCs have a semi-common LBC, define this here */ #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \ defined(CONFIG_MPC83xx) +#if !defined(CONFIG_FSL_IFC) #define CONFIG_FSL_LBC #endif +#endif /* All PPC boards must swap IDE bytes */ #define CONFIG_IDE_SWAP_IO diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 6c16681b7f3..4228161c626 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -67,11 +67,17 @@ #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define QE_MURAM_SIZE 0x10000UL +#define MAX_QE_RISC 2 +#define QE_NUM_OF_SNUM 28 #elif defined(CONFIG_MPC8569) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define QE_MURAM_SIZE 0x20000UL +#define MAX_QE_RISC 4 +#define QE_NUM_OF_SNUM 46 #elif defined(CONFIG_MPC8572) #define CONFIG_MAX_CPUS 2 @@ -85,21 +91,32 @@ #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_FSL_SATA_V2 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +/* P1011 is single core version of P1020 */ #elif defined(CONFIG_P1011) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +/* P1012 is single core version of P1021 */ #elif defined(CONFIG_P1012) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +/* P1013 is single core version of P1022 */ #elif defined(CONFIG_P1013) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 @@ -114,6 +131,42 @@ #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_FSL_SATA_V2 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 + +/* P1015 is single core version of P1024 */ +#elif defined(CONFIG_P1015) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_FSL_PCIE_DISABLE_ASPM +#define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 + +/* P1016 is single core version of P1025 */ +#elif defined(CONFIG_P1016) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_FSL_PCIE_DISABLE_ASPM +#define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 + +/* P1017 is single core version of P1023 */ +#elif defined(CONFIG_P1017) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_QMAN_NUM_PORTALS 3 +#define CONFIG_SYS_BMAN_NUM_PORTALS 3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x10000 #elif defined(CONFIG_P1020) #define CONFIG_MAX_CPUS 2 @@ -121,6 +174,8 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_P1021) #define CONFIG_MAX_CPUS 2 @@ -128,6 +183,8 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_P1022) #define CONFIG_MAX_CPUS 2 @@ -138,6 +195,38 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_FSL_SATA_ERRATUM_A001 +#elif defined(CONFIG_P1023) +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_QMAN_NUM_PORTALS 3 +#define CONFIG_SYS_BMAN_NUM_PORTALS 3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x10000 + +/* P1024 is lower end variant of P1020 */ +#elif defined(CONFIG_P1024) +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_FSL_PCIE_DISABLE_ASPM +#define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 + +/* P1025 is lower end variant of P1021 */ +#elif defined(CONFIG_P1025) +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_FSL_PCIE_DISABLE_ASPM +#define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 + +/* P2010 is single core version of P2020 */ #elif defined(CONFIG_P2010) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 @@ -154,21 +243,35 @@ #elif defined(CONFIG_PPC_P2040) #define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #elif defined(CONFIG_PPC_P3041) #define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #elif defined(CONFIG_PPC_P4040) #define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #elif defined(CONFIG_PPC_P4080) #define CONFIG_MAX_CPUS 8 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_SYS_NUM_FMAN 2 @@ -177,6 +280,7 @@ #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_SYS_NUM_FM2_10GEC 1 #define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_ERRATUM_CPC_A002 #define CONFIG_SYS_FSL_ERRATUM_CPC_A003 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003 @@ -187,15 +291,28 @@ #define CONFIG_SYS_P4080_ERRATUM_CPU22 #define CONFIG_SYS_P4080_ERRATUM_SERDES8 +/* P5010 is single core version of P5020 */ #elif defined(CONFIG_PPC_P5010) #define CONFIG_MAX_CPUS 1 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #elif defined(CONFIG_PPC_P5020) #define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #else #error Processor type not defined for this platform diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 02a1f5d3233..99dddb4f004 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -84,6 +84,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_32_BE 0x00080000 +#define SDRAM_CFG_16_BE 0x00100000 #define SDRAM_CFG_8_BE 0x00040000 #define SDRAM_CFG_NCAP 0x00020000 #define SDRAM_CFG_2T_EN 0x00008000 @@ -271,6 +272,8 @@ typedef struct memctl_options_s { extern phys_size_t fsl_ddr_sdram(void); extern int fsl_use_spd(void); +extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, + unsigned int ctrl_num); /* * The 85xx boards have a common prototype for fixed_sdram so put the diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h new file mode 100644 index 00000000000..d4d98090556 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_ifc.h @@ -0,0 +1,957 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Author: Dipen Dudhat <dipen.dudhat@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_PPC_FSL_IFC_H +#define __ASM_PPC_FSL_IFC_H + +#include <config.h> +#include <common.h> + +/* + * CSPR - Chip Select Property Register + */ +#define CSPR_BA 0xFFFF0000 +#define CSPR_BA_SHIFT 16 +#define CSPR_PORT_SIZE 0x00000180 +#define CSPR_PORT_SIZE_SHIFT 7 +/* Port Size 8 bit */ +#define CSPR_PORT_SIZE_8 0x00000080 +/* Port Size 16 bit */ +#define CSPR_PORT_SIZE_16 0x00000100 +/* Port Size 32 bit */ +#define CSPR_PORT_SIZE_32 0x00000180 +/* Write Protect */ +#define CSPR_WP 0x00000040 +#define CSPR_WP_SHIFT 6 +/* Machine Select */ +#define CSPR_MSEL 0x00000006 +#define CSPR_MSEL_SHIFT 1 +/* NOR */ +#define CSPR_MSEL_NOR 0x00000000 +/* NAND */ +#define CSPR_MSEL_NAND 0x00000002 +/* GPCM */ +#define CSPR_MSEL_GPCM 0x00000004 +/* Bank Valid */ +#define CSPR_V 0x00000001 +#define CSPR_V_SHIFT 0 + +/* Convert an address into the right format for the CSPR Registers */ +#define CSPR_PHYS_ADDR(x) (((uint64_t)x) & 0xffff0000) + +/* + * Address Mask Register + */ +#define IFC_AMASK_MASK 0xFFFF0000 +#define IFC_AMASK_SHIFT 16 +#define IFC_AMASK(n) (IFC_AMASK_MASK << \ + (__ilog2(n) - IFC_AMASK_SHIFT)) + +/* + * Chip Select Option Register IFC_NAND Machine + */ +/* Enable ECC Encoder */ +#define CSOR_NAND_ECC_ENC_EN 0x80000000 +/* 4 bit correction per 520 Byte sector */ +#define CSOR_NAND_ECC_MODE_4 0x00000000 +/* 8 bit correction per 528 Byte sector */ +#define CSOR_NAND_ECC_MODE_8 0x10000000 +/* Enable ECC Decoder */ +#define CSOR_NAND_ECC_DEC_EN 0x04000000 +/* Row Address Length */ +#define CSOR_NAND_RAL_MASK 0x01800000 +#define CSOR_NAND_RAL_SHIFT 20 +#define CSOR_NAND_RAL_1 0x00000000 +#define CSOR_NAND_RAL_2 0x00800000 +#define CSOR_NAND_RAL_3 0x01000000 +#define CSOR_NAND_RAL_4 0x01800000 +/* Page Size 512b, 2k, 4k */ +#define CSOR_NAND_PGS_MASK 0x00180000 +#define CSOR_NAND_PGS_SHIFT 16 +#define CSOR_NAND_PGS_512 0x00000000 +#define CSOR_NAND_PGS_2K 0x00080000 +#define CSOR_NAND_PGS_4K 0x00100000 +/* Spare region Size */ +#define CSOR_NAND_SPRZ_MASK 0x0000E000 +#define CSOR_NAND_SPRZ_SHIFT 13 +#define CSOR_NAND_SPRZ_16 0x00000000 +#define CSOR_NAND_SPRZ_64 0x00002000 +#define CSOR_NAND_SPRZ_128 0x00004000 +#define CSOR_NAND_SPRZ_210 0x00006000 +#define CSOR_NAND_SPRZ_218 0x00008000 +#define CSOR_NAND_SPRZ_224 0x0000A000 +/* Pages Per Block */ +#define CSOR_NAND_PB_MASK 0x00000700 +#define CSOR_NAND_PB_SHIFT 8 +#define CSOR_NAND_PB(n) ((__ilog2(n) - 5) << CSOR_NAND_PB_SHIFT) +/* Time for Read Enable High to Output High Impedance */ +#define CSOR_NAND_TRHZ_MASK 0x0000001C +#define CSOR_NAND_TRHZ_SHIFT 2 +#define CSOR_NAND_TRHZ_20 0x00000000 +#define CSOR_NAND_TRHZ_40 0x00000004 +#define CSOR_NAND_TRHZ_60 0x00000008 +#define CSOR_NAND_TRHZ_80 0x0000000C +#define CSOR_NAND_TRHZ_100 0x00000010 +/* Buffer control disable */ +#define CSOR_NAND_BCTLD 0x00000001 + +/* + * Chip Select Option Register - NOR Flash Mode + */ +/* Enable Address shift Mode */ +#define CSOR_NOR_ADM_SHFT_MODE_EN 0x80000000 +/* Page Read Enable from NOR device */ +#define CSOR_NOR_PGRD_EN 0x10000000 +/* AVD Toggle Enable during Burst Program */ +#define CSOR_NOR_AVD_TGL_PGM_EN 0x01000000 +/* Address Data Multiplexing Shift */ +#define CSOR_NOR_ADM_MASK 0x0003E000 +#define CSOR_NOR_ADM_SHIFT_SHIFT 13 +#define CSOR_NOR_ADM_SHIFT(n) ((n) << CSOR_NOR_ADM_SHIFT_SHIFT) +/* Type of the NOR device hooked */ +#define CSOR_NOR_NOR_MODE_AYSNC_NOR 0x00000000 +#define CSOR_NOR_NOR_MODE_AVD_NOR 0x00000020 +/* Time for Read Enable High to Output High Impedance */ +#define CSOR_NOR_TRHZ_MASK 0x0000001C +#define CSOR_NOR_TRHZ_SHIFT 2 +#define CSOR_NOR_TRHZ_20 0x00000000 +#define CSOR_NOR_TRHZ_40 0x00000004 +#define CSOR_NOR_TRHZ_60 0x00000008 +#define CSOR_NOR_TRHZ_80 0x0000000C +#define CSOR_NOR_TRHZ_100 0x00000010 +/* Buffer control disable */ +#define CSOR_NOR_BCTLD 0x00000001 + +/* + * Chip Select Option Register - GPCM Mode + */ +/* GPCM Mode - Normal */ +#define CSOR_GPCM_GPMODE_NORMAL 0x00000000 +/* GPCM Mode - GenericASIC */ +#define CSOR_GPCM_GPMODE_ASIC 0x80000000 +/* Parity Mode odd/even */ +#define CSOR_GPCM_PARITY_EVEN 0x40000000 +/* Parity Checking enable/disable */ +#define CSOR_GPCM_PAR_EN 0x20000000 +/* GPCM Timeout Count */ +#define CSOR_GPCM_GPTO_MASK 0x0F000000 +#define CSOR_GPCM_GPTO_SHIFT 24 +#define CSOR_GPCM_GPTO(n) ((__ilog2(n) - 8) << CSOR_GPCM_GPTO_SHIFT) +/* GPCM External Access Termination mode for read access */ +#define CSOR_GPCM_RGETA_EXT 0x00080000 +/* GPCM External Access Termination mode for write access */ +#define CSOR_GPCM_WGETA_EXT 0x00040000 +/* Address Data Multiplexing Shift */ +#define CSOR_GPCM_ADM_MASK 0x0003E000 +#define CSOR_GPCM_ADM_SHIFT_SHIFT 13 +#define CSOR_GPCM_ADM_SHIFT(n) ((n) << CSOR_GPCM_ADM_SHIFT_SHIFT) +/* Generic ASIC Parity error indication delay */ +#define CSOR_GPCM_GAPERRD_MASK 0x00000180 +#define CSOR_GPCM_GAPERRD_SHIFT 7 +#define CSOR_GPCM_GAPERRD(n) (((n) - 1) << CSOR_GPCM_GAPERRD_SHIFT) +/* Time for Read Enable High to Output High Impedance */ +#define CSOR_GPCM_TRHZ_MASK 0x0000001C +#define CSOR_GPCM_TRHZ_20 0x00000000 +#define CSOR_GPCM_TRHZ_40 0x00000004 +#define CSOR_GPCM_TRHZ_60 0x00000008 +#define CSOR_GPCM_TRHZ_80 0x0000000C +#define CSOR_GPCM_TRHZ_100 0x00000010 +/* Buffer control disable */ +#define CSOR_GPCM_BCTLD 0x00000001 + +/* + * Flash Timing Registers (FTIM0 - FTIM2_CSn) + */ +/* + * FTIM0 - NAND Flash Mode + */ +#define FTIM0_NAND 0x7EFF3F3F +#define FTIM0_NAND_TCCST_SHIFT 25 +#define FTIM0_NAND_TCCST(n) ((n) << FTIM0_NAND_TCCST_SHIFT) +#define FTIM0_NAND_TWP_SHIFT 16 +#define FTIM0_NAND_TWP(n) ((n) << FTIM0_NAND_TWP_SHIFT) +#define FTIM0_NAND_TWCHT_SHIFT 8 +#define FTIM0_NAND_TWCHT(n) ((n) << FTIM0_NAND_TWCHT_SHIFT) +#define FTIM0_NAND_TWH_SHIFT 0 +#define FTIM0_NAND_TWH(n) ((n) << FTIM0_NAND_TWH_SHIFT) +/* + * FTIM1 - NAND Flash Mode + */ +#define FTIM1_NAND 0xFFFF3FFF +#define FTIM1_NAND_TADLE_SHIFT 24 +#define FTIM1_NAND_TADLE(n) ((n) << FTIM1_NAND_TADLE_SHIFT) +#define FTIM1_NAND_TWBE_SHIFT 16 +#define FTIM1_NAND_TWBE(n) ((n) << FTIM1_NAND_TWBE_SHIFT) +#define FTIM1_NAND_TRR_SHIFT 8 +#define FTIM1_NAND_TRR(n) ((n) << FTIM1_NAND_TRR_SHIFT) +#define FTIM1_NAND_TRP_SHIFT 0 +#define FTIM1_NAND_TRP(n) ((n) << FTIM1_NAND_TRP_SHIFT) +/* + * FTIM2 - NAND Flash Mode + */ +#define FTIM2_NAND 0x1FE1F8FF +#define FTIM2_NAND_TRAD_SHIFT 21 +#define FTIM2_NAND_TRAD(n) ((n) << FTIM2_NAND_TRAD_SHIFT) +#define FTIM2_NAND_TREH_SHIFT 11 +#define FTIM2_NAND_TREH(n) ((n) << FTIM2_NAND_TREH_SHIFT) +#define FTIM2_NAND_TWHRE_SHIFT 0 +#define FTIM2_NAND_TWHRE(n) ((n) << FTIM2_NAND_TWHRE_SHIFT) +/* + * FTIM3 - NAND Flash Mode + */ +#define FTIM3_NAND 0xFF000000 +#define FTIM3_NAND_TWW_SHIFT 24 +#define FTIM3_NAND_TWW(n) ((n) << FTIM3_NAND_TWW_SHIFT) + +/* + * FTIM0 - NOR Flash Mode + */ +#define FTIM0_NOR 0xF03F3F3F +#define FTIM0_NOR_TACSE_SHIFT 28 +#define FTIM0_NOR_TACSE(n) ((n) << FTIM0_NOR_TACSE_SHIFT) +#define FTIM0_NOR_TEADC_SHIFT 16 +#define FTIM0_NOR_TEADC(n) ((n) << FTIM0_NOR_TEADC_SHIFT) +#define FTIM0_NOR_TAVDS_SHIFT 8 +#define FTIM0_NOR_TAVDS(n) ((n) << FTIM0_NOR_TAVDS_SHIFT) +#define FTIM0_NOR_TEAHC_SHIFT 0 +#define FTIM0_NOR_TEAHC(n) ((n) << FTIM0_NOR_TEAHC_SHIFT) +/* + * FTIM1 - NOR Flash Mode + */ +#define FTIM1_NOR 0xFF003F3F +#define FTIM1_NOR_TACO_SHIFT 24 +#define FTIM1_NOR_TACO(n) ((n) << FTIM1_NOR_TACO_SHIFT) +#define FTIM1_NOR_TRAD_NOR_SHIFT 8 +#define FTIM1_NOR_TRAD_NOR(n) ((n) << FTIM1_NOR_TRAD_NOR_SHIFT) +#define FTIM1_NOR_TSEQRAD_NOR_SHIFT 0 +#define FTIM1_NOR_TSEQRAD_NOR(n) ((n) << FTIM1_NOR_TSEQRAD_NOR_SHIFT) +/* + * FTIM2 - NOR Flash Mode + */ +#define FTIM2_NOR 0x0F3CFCFF +#define FTIM2_NOR_TCS_SHIFT 24 +#define FTIM2_NOR_TCS(n) ((n) << FTIM2_NOR_TCS_SHIFT) +#define FTIM2_NOR_TCH_SHIFT 18 +#define FTIM2_NOR_TCH(n) ((n) << FTIM2_NOR_TCH_SHIFT) +#define FTIM2_NOR_TWPH_SHIFT 10 +#define FTIM2_NOR_TWPH(n) ((n) << FTIM2_NOR_TWPH_SHIFT) +#define FTIM2_NOR_TWP_SHIFT 0 +#define FTIM2_NOR_TWP(n) ((n) << FTIM2_NOR_TWP_SHIFT) + +/* + * FTIM0 - Normal GPCM Mode + */ +#define FTIM0_GPCM 0xF03F3F3F +#define FTIM0_GPCM_TACSE_SHIFT 28 +#define FTIM0_GPCM_TACSE(n) ((n) << FTIM0_GPCM_TACSE_SHIFT) +#define FTIM0_GPCM_TEADC_SHIFT 16 +#define FTIM0_GPCM_TEADC(n) ((n) << FTIM0_GPCM_TEADC_SHIFT) +#define FTIM0_GPCM_TAVDS_SHIFT 8 +#define FTIM0_GPCM_TAVDS(n) ((n) << FTIM0_GPCM_TAVDS_SHIFT) +#define FTIM0_GPCM_TEAHC_SHIFT 0 +#define FTIM0_GPCM_TEAHC(n) ((n) << FTIM0_GPCM_TEAHC_SHIFT) +/* + * FTIM1 - Normal GPCM Mode + */ +#define FTIM1_GPCM 0xFF003F00 +#define FTIM1_GPCM_TACO_SHIFT 24 +#define FTIM1_GPCM_TACO(n) ((n) << FTIM1_GPCM_TACO_SHIFT) +#define FTIM1_GPCM_TRAD_SHIFT 8 +#define FTIM1_GPCM_TRAD(n) ((n) << FTIM1_GPCM_TRAD_SHIFT) +/* + * FTIM2 - Normal GPCM Mode + */ +#define FTIM2_GPCM 0x0F3C00FF +#define FTIM2_GPCM_TCS_SHIFT 24 +#define FTIM2_GPCM_TCS(n) ((n) << FTIM2_GPCM_TCS_SHIFT) +#define FTIM2_GPCM_TCH_SHIFT 18 +#define FTIM2_GPCM_TCH(n) ((n) << FTIM2_GPCM_TCH_SHIFT) +#define FTIM2_GPCM_TWP_SHIFT 0 +#define FTIM2_GPCM_TWP(n) ((n) << FTIM2_GPCM_TWP_SHIFT) + +/* + * Ready Busy Status Register (RB_STAT) + */ +/* CSn is READY */ +#define IFC_RB_STAT_READY_CS0 0x80000000 +#define IFC_RB_STAT_READY_CS1 0x40000000 +#define IFC_RB_STAT_READY_CS2 0x20000000 +#define IFC_RB_STAT_READY_CS3 0x10000000 + +/* + * General Control Register (GCR) + */ +#define IFC_GCR_MASK 0x8000F800 +/* reset all IFC hardware */ +#define IFC_GCR_SOFT_RST_ALL 0x80000000 +/* Turnaroud Time of external buffer */ +#define IFC_GCR_TBCTL_TRN_TIME 0x0000F800 +#define IFC_GCR_TBCTL_TRN_TIME_SHIFT 11 + +/* + * Common Event and Error Status Register (CM_EVTER_STAT) + */ +/* Chip select error */ +#define IFC_CM_EVTER_STAT_CSER 0x80000000 + +/* + * Common Event and Error Enable Register (CM_EVTER_EN) + */ +/* Chip select error checking enable */ +#define IFC_CM_EVTER_EN_CSEREN 0x80000000 + +/* + * Common Event and Error Interrupt Enable Register (CM_EVTER_INTR_EN) + */ +/* Chip select error interrupt enable */ +#define IFC_CM_EVTER_INTR_EN_CSERIREN 0x80000000 + +/* + * Common Transfer Error Attribute Register-0 (CM_ERATTR0) + */ +/* transaction type of error Read/Write */ +#define IFC_CM_ERATTR0_ERTYP_READ 0x80000000 +#define IFC_CM_ERATTR0_ERAID 0x0FF00000 +#define IFC_CM_ERATTR0_ESRCID 0x0000FF00 + +/* + * Clock Control Register (CCR) + */ +#define IFC_CCR_MASK 0x0F0F8800 +/* Clock division ratio */ +#define IFC_CCR_CLK_DIV_MASK 0x0F000000 +#define IFC_CCR_CLK_DIV_SHIFT 24 +#define IFC_CCR_CLK_DIV(n) ((n-1) << IFC_CCR_CLK_DIV_SHIFT) +/* IFC Clock Delay */ +#define IFC_CCR_CLK_DLY_MASK 0x000F0000 +#define IFC_CCR_CLK_DLY_SHIFT 16 +#define IFC_CCR_CLK_DLY(n) ((n) << IFC_CCR_CLK_DLY_SHIFT) +/* Invert IFC clock before sending out */ +#define IFC_CCR_INV_CLK_EN 0x00008000 +/* Fedback IFC Clock */ +#define IFC_CCR_FB_IFC_CLK_SEL 0x00000800 + +/* + * Clock Status Register (CSR) + */ +/* Clk is stable */ +#define IFC_CSR_CLK_STAT_STABLE 0x80000000 + +/* + * IFC_NAND Machine Specific Registers + */ +/* + * NAND Configuration Register (NCFGR) + */ +/* Auto Boot Mode */ +#define IFC_NAND_NCFGR_BOOT 0x80000000 +/* Addressing Mode-ROW0+n/COL0 */ +#define IFC_NAND_NCFGR_ADDR_MODE_RC0 0x00000000 +/* Addressing Mode-ROW0+n/COL0+n */ +#define IFC_NAND_NCFGR_ADDR_MODE_RC1 0x00400000 +/* Number of loop iterations of FIR sequences for multi page operations */ +#define IFC_NAND_NCFGR_NUM_LOOP_MASK 0x0000F000 +#define IFC_NAND_NCFGR_NUM_LOOP_SHIFT 12 +#define IFC_NAND_NCFGR_NUM_LOOP(n) ((n) << IFC_NAND_NCFGR_NUM_LOOP_SHIFT) +/* Number of wait cycles */ +#define IFC_NAND_NCFGR_NUM_WAIT_MASK 0x000000FF +#define IFC_NAND_NCFGR_NUM_WAIT_SHIFT 0 + +/* + * NAND Flash Command Registers (NAND_FCR0/NAND_FCR1) + */ +/* General purpose FCM flash command bytes CMD0-CMD7 */ +#define IFC_NAND_FCR0_CMD0 0xFF000000 +#define IFC_NAND_FCR0_CMD0_SHIFT 24 +#define IFC_NAND_FCR0_CMD1 0x00FF0000 +#define IFC_NAND_FCR0_CMD1_SHIFT 16 +#define IFC_NAND_FCR0_CMD2 0x0000FF00 +#define IFC_NAND_FCR0_CMD2_SHIFT 8 +#define IFC_NAND_FCR0_CMD3 0x000000FF +#define IFC_NAND_FCR0_CMD3_SHIFT 0 +#define IFC_NAND_FCR1_CMD4 0xFF000000 +#define IFC_NAND_FCR1_CMD4_SHIFT 24 +#define IFC_NAND_FCR1_CMD5 0x00FF0000 +#define IFC_NAND_FCR1_CMD5_SHIFT 16 +#define IFC_NAND_FCR1_CMD6 0x0000FF00 +#define IFC_NAND_FCR1_CMD6_SHIFT 8 +#define IFC_NAND_FCR1_CMD7 0x000000FF +#define IFC_NAND_FCR1_CMD7_SHIFT 0 + +/* + * Flash ROW and COL Address Register (ROWn, COLn) + */ +/* Main/spare region locator */ +#define IFC_NAND_COL_MS 0x80000000 +/* Column Address */ +#define IFC_NAND_COL_CA_MASK 0x00000FFF + +/* + * NAND Flash Byte Count Register (NAND_BC) + */ +/* Byte Count for read/Write */ +#define IFC_NAND_BC 0x000001FF + +/* + * NAND Flash Instruction Registers (NAND_FIR0/NAND_FIR1/NAND_FIR2) + */ +/* NAND Machine specific opcodes OP0-OP14*/ +#define IFC_NAND_FIR0_OP0 0xFC000000 +#define IFC_NAND_FIR0_OP0_SHIFT 26 +#define IFC_NAND_FIR0_OP1 0x03F00000 +#define IFC_NAND_FIR0_OP1_SHIFT 20 +#define IFC_NAND_FIR0_OP2 0x000FC000 +#define IFC_NAND_FIR0_OP2_SHIFT 14 +#define IFC_NAND_FIR0_OP3 0x00003F00 +#define IFC_NAND_FIR0_OP3_SHIFT 8 +#define IFC_NAND_FIR0_OP4 0x000000FC +#define IFC_NAND_FIR0_OP4_SHIFT 2 +#define IFC_NAND_FIR1_OP5 0xFC000000 +#define IFC_NAND_FIR1_OP5_SHIFT 26 +#define IFC_NAND_FIR1_OP6 0x03F00000 +#define IFC_NAND_FIR1_OP6_SHIFT 20 +#define IFC_NAND_FIR1_OP7 0x000FC000 +#define IFC_NAND_FIR1_OP7_SHIFT 14 +#define IFC_NAND_FIR1_OP8 0x00003F00 +#define IFC_NAND_FIR1_OP8_SHIFT 8 +#define IFC_NAND_FIR1_OP9 0x000000FC +#define IFC_NAND_FIR1_OP9_SHIFT 2 +#define IFC_NAND_FIR2_OP10 0xFC000000 +#define IFC_NAND_FIR2_OP10_SHIFT 26 +#define IFC_NAND_FIR2_OP11 0x03F00000 +#define IFC_NAND_FIR2_OP11_SHIFT 20 +#define IFC_NAND_FIR2_OP12 0x000FC000 +#define IFC_NAND_FIR2_OP12_SHIFT 14 +#define IFC_NAND_FIR2_OP13 0x00003F00 +#define IFC_NAND_FIR2_OP13_SHIFT 8 +#define IFC_NAND_FIR2_OP14 0x000000FC +#define IFC_NAND_FIR2_OP14_SHIFT 2 + +/* + * Instruction opcodes to be programmed + * in FIR registers- 6bits + */ +enum ifc_nand_fir_opcodes { + IFC_FIR_OP_NOP, + IFC_FIR_OP_CA0, + IFC_FIR_OP_CA1, + IFC_FIR_OP_CA2, + IFC_FIR_OP_CA3, + IFC_FIR_OP_RA0, + IFC_FIR_OP_RA1, + IFC_FIR_OP_RA2, + IFC_FIR_OP_RA3, + IFC_FIR_OP_CMD0, + IFC_FIR_OP_CMD1, + IFC_FIR_OP_CMD2, + IFC_FIR_OP_CMD3, + IFC_FIR_OP_CMD4, + IFC_FIR_OP_CMD5, + IFC_FIR_OP_CMD6, + IFC_FIR_OP_CMD7, + IFC_FIR_OP_CW0, + IFC_FIR_OP_CW1, + IFC_FIR_OP_CW2, + IFC_FIR_OP_CW3, + IFC_FIR_OP_CW4, + IFC_FIR_OP_CW5, + IFC_FIR_OP_CW6, + IFC_FIR_OP_CW7, + IFC_FIR_OP_WBCD, + IFC_FIR_OP_RBCD, + IFC_FIR_OP_BTRD, + IFC_FIR_OP_RDSTAT, + IFC_FIR_OP_NWAIT, + IFC_FIR_OP_WFR, + IFC_FIR_OP_SBRD, + IFC_FIR_OP_UA, + IFC_FIR_OP_RB, +}; + +/* + * NAND Chip Select Register (NAND_CSEL) + */ +#define IFC_NAND_CSEL 0x0C000000 +#define IFC_NAND_CSEL_SHIFT 26 +#define IFC_NAND_CSEL_CS0 0x00000000 +#define IFC_NAND_CSEL_CS1 0x04000000 +#define IFC_NAND_CSEL_CS2 0x08000000 +#define IFC_NAND_CSEL_CS3 0x0C000000 + +/* + * NAND Operation Sequence Start (NANDSEQ_STRT) + */ +/* NAND Flash Operation Start */ +#define IFC_NAND_SEQ_STRT_FIR_STRT 0x80000000 +/* Automatic Erase */ +#define IFC_NAND_SEQ_STRT_AUTO_ERS 0x00800000 +/* Automatic Program */ +#define IFC_NAND_SEQ_STRT_AUTO_PGM 0x00100000 +/* Automatic Copyback */ +#define IFC_NAND_SEQ_STRT_AUTO_CPB 0x00020000 +/* Automatic Read Operation */ +#define IFC_NAND_SEQ_STRT_AUTO_RD 0x00004000 +/* Automatic Status Read */ +#define IFC_NAND_SEQ_STRT_AUTO_STAT_RD 0x00000800 + +/* + * NAND Event and Error Status Register (NAND_EVTER_STAT) + */ +/* Operation Complete */ +#define IFC_NAND_EVTER_STAT_OPC 0x80000000 +/* Flash Timeout Error */ +#define IFC_NAND_EVTER_STAT_FTOER 0x08000000 +/* Write Protect Error */ +#define IFC_NAND_EVTER_STAT_WPER 0x04000000 +/* ECC Error */ +#define IFC_NAND_EVTER_STAT_ECCER 0x02000000 +/* RCW Load Done */ +#define IFC_NAND_EVTER_STAT_RCW_DN 0x00008000 +/* Boot Loadr Done */ +#define IFC_NAND_EVTER_STAT_BOOT_DN 0x00004000 +/* Bad Block Indicator search select */ +#define IFC_NAND_EVTER_STAT_BBI_SRCH_SE 0x00000800 + +/* + * NAND Flash Page Read Completion Event Status Register + * (PGRDCMPL_EVT_STAT) + */ +#define PGRDCMPL_EVT_STAT_MASK 0xFFFF0000 +/* Small Page 0-15 Done */ +#define PGRDCMPL_EVT_STAT_SECTION_SP(n) (1 << (31 - (n))) +/* Large Page(2K) 0-3 Done */ +#define PGRDCMPL_EVT_STAT_LP_2K(n) (0xF << (28 - (n)*4)) +/* Large Page(4K) 0-1 Done */ +#define PGRDCMPL_EVT_STAT_LP_4K(n) (0xFF << (24 - (n)*8)) + +/* + * NAND Event and Error Enable Register (NAND_EVTER_EN) + */ +/* Operation complete event enable */ +#define IFC_NAND_EVTER_EN_OPC_EN 0x80000000 +/* Page read complete event enable */ +#define IFC_NAND_EVTER_EN_PGRDCMPL_EN 0x20000000 +/* Flash Timeout error enable */ +#define IFC_NAND_EVTER_EN_FTOER_EN 0x08000000 +/* Write Protect error enable */ +#define IFC_NAND_EVTER_EN_WPER_EN 0x04000000 +/* ECC error logging enable */ +#define IFC_NAND_EVTER_EN_ECCER_EN 0x02000000 + +/* + * NAND Event and Error Interrupt Enable Register (NAND_EVTER_INTR_EN) + */ +/* Enable interrupt for operation complete */ +#define IFC_NAND_EVTER_INTR_OPCIR_EN 0x80000000 +/* Enable interrupt for Page read complete */ +#define IFC_NAND_EVTER_INTR_PGRDCMPLIR_EN 0x20000000 +/* Enable interrupt for Flash timeout error */ +#define IFC_NAND_EVTER_INTR_FTOERIR_EN 0x08000000 +/* Enable interrupt for Write protect error */ +#define IFC_NAND_EVTER_INTR_WPERIR_EN 0x04000000 +/* Enable interrupt for ECC error*/ +#define IFC_NAND_EVTER_INTR_ECCERIR_EN 0x02000000 + +/* + * NAND Transfer Error Attribute Register-0 (NAND_ERATTR0) + */ +#define IFC_NAND_ERATTR0_MASK 0x0C080000 +/* Error on CS0-3 for NAND */ +#define IFC_NAND_ERATTR0_ERCS_CS0 0x00000000 +#define IFC_NAND_ERATTR0_ERCS_CS1 0x04000000 +#define IFC_NAND_ERATTR0_ERCS_CS2 0x08000000 +#define IFC_NAND_ERATTR0_ERCS_CS3 0x0C000000 +/* Transaction type of error Read/Write */ +#define IFC_NAND_ERATTR0_ERTTYPE_READ 0x00080000 + +/* + * NAND Flash Status Register (NAND_FSR) + */ +/* First byte of data read from read status op */ +#define IFC_NAND_NFSR_RS0 0xFF000000 +/* Second byte of data read from read status op */ +#define IFC_NAND_NFSR_RS1 0x00FF0000 + +/* + * ECC Error Status Registers (ECCSTAT0-ECCSTAT3) + */ +/* Number of ECC errors on sector n (n = 0-15) */ +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_SHIFT 24 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_SHIFT 16 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_SHIFT 8 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_MASK 0x0000000F +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_SHIFT 0 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_SHIFT 24 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_SHIFT 16 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_SHIFT 8 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_MASK 0x0000000F +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_SHIFT 0 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_SHIFT 24 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_SHIFT 16 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_SHIFT 8 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_MASK 0x0000000F +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_SHIFT 0 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_SHIFT 24 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_SHIFT 16 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_SHIFT 8 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_MASK 0x0000000F +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_SHIFT 0 + +/* + * NAND Control Register (NANDCR) + */ +#define IFC_NAND_NCR_FTOCNT_MASK 0x1E000000 +#define IFC_NAND_NCR_FTOCNT_SHIFT 25 +#define IFC_NAND_NCR_FTOCNT(n) ((_ilog2(n) - 8) << IFC_NAND_NCR_FTOCNT_SHIFT) + +/* + * NAND_AUTOBOOT_TRGR + */ +/* Trigger RCW load */ +#define IFC_NAND_AUTOBOOT_TRGR_RCW_LD 0x80000000 +/* Trigget Auto Boot */ +#define IFC_NAND_AUTOBOOT_TRGR_BOOT_LD 0x20000000 + +/* + * NAND_MDR + */ +/* 1st read data byte when opcode SBRD */ +#define IFC_NAND_MDR_RDATA0 0xFF000000 +/* 2nd read data byte when opcode SBRD */ +#define IFC_NAND_MDR_RDATA1 0x00FF0000 + +/* + * NOR Machine Specific Registers + */ +/* + * NOR Event and Error Status Register (NOR_EVTER_STAT) + */ +/* NOR Command Sequence Operation Complete */ +#define IFC_NOR_EVTER_STAT_OPC_NOR 0x80000000 +/* Write Protect Error */ +#define IFC_NOR_EVTER_STAT_WPER 0x04000000 +/* Command Sequence Timeout Error */ +#define IFC_NOR_EVTER_STAT_STOER 0x01000000 + +/* + * NOR Event and Error Enable Register (NOR_EVTER_EN) + */ +/* NOR Command Seq complete event enable */ +#define IFC_NOR_EVTER_EN_OPCEN_NOR 0x80000000 +/* Write Protect Error Checking Enable */ +#define IFC_NOR_EVTER_EN_WPEREN 0x04000000 +/* Timeout Error Enable */ +#define IFC_NOR_EVTER_EN_STOEREN 0x01000000 + +/* + * NOR Event and Error Interrupt Enable Register (NOR_EVTER_INTR_EN) + */ +/* Enable interrupt for OPC complete */ +#define IFC_NOR_EVTER_INTR_OPCEN_NOR 0x80000000 +/* Enable interrupt for write protect error */ +#define IFC_NOR_EVTER_INTR_WPEREN 0x04000000 +/* Enable interrupt for timeout error */ +#define IFC_NOR_EVTER_INTR_STOEREN 0x01000000 + +/* + * NOR Transfer Error Attribute Register-0 (NOR_ERATTR0) + */ +/* Source ID for error transaction */ +#define IFC_NOR_ERATTR0_ERSRCID 0xFF000000 +/* AXI ID for error transation */ +#define IFC_NOR_ERATTR0_ERAID 0x000FF000 +/* Chip select corresponds to NOR error */ +#define IFC_NOR_ERATTR0_ERCS_CS0 0x00000000 +#define IFC_NOR_ERATTR0_ERCS_CS1 0x00000010 +#define IFC_NOR_ERATTR0_ERCS_CS2 0x00000020 +#define IFC_NOR_ERATTR0_ERCS_CS3 0x00000030 +/* Type of transaction read/write */ +#define IFC_NOR_ERATTR0_ERTYPE_READ 0x00000001 + +/* + * NOR Transfer Error Attribute Register-2 (NOR_ERATTR2) + */ +#define IFC_NOR_ERATTR2_ER_NUM_PHASE_EXP 0x000F0000 +#define IFC_NOR_ERATTR2_ER_NUM_PHASE_PER 0x00000F00 + +/* + * NOR Control Register (NORCR) + */ +#define IFC_NORCR_MASK 0x0F0F0000 +/* No. of Address/Data Phase */ +#define IFC_NORCR_NUM_PHASE_MASK 0x0F000000 +#define IFC_NORCR_NUM_PHASE_SHIFT 24 +#define IFC_NORCR_NUM_PHASE(n) ((n-1) << IFC_NORCR_NUM_PHASE_SHIFT) +/* Sequence Timeout Count */ +#define IFC_NORCR_STOCNT_MASK 0x000F0000 +#define IFC_NORCR_STOCNT_SHIFT 16 +#define IFC_NORCR_STOCNT(n) ((__ilog2(n) - 8) << IFC_NORCR_STOCNT_SHIFT) + +/* + * GPCM Machine specific registers + */ +/* + * GPCM Event and Error Status Register (GPCM_EVTER_STAT) + */ +/* Timeout error */ +#define IFC_GPCM_EVTER_STAT_TOER 0x04000000 +/* Parity error */ +#define IFC_GPCM_EVTER_STAT_PER 0x01000000 + +/* + * GPCM Event and Error Enable Register (GPCM_EVTER_EN) + */ +/* Timeout error enable */ +#define IFC_GPCM_EVTER_EN_TOER_EN 0x04000000 +/* Parity error enable */ +#define IFC_GPCM_EVTER_EN_PER_EN 0x01000000 + +/* + * GPCM Event and Error Interrupt Enable Register (GPCM_EVTER_INTR_EN) + */ +/* Enable Interrupt for timeout error */ +#define IFC_GPCM_EEIER_TOERIR_EN 0x04000000 +/* Enable Interrupt for Parity error */ +#define IFC_GPCM_EEIER_PERIR_EN 0x01000000 + +/* + * GPCM Transfer Error Attribute Register-0 (GPCM_ERATTR0) + */ +/* Source ID for error transaction */ +#define IFC_GPCM_ERATTR0_ERSRCID 0xFF000000 +/* AXI ID for error transaction */ +#define IFC_GPCM_ERATTR0_ERAID 0x000FF000 +/* Chip select corresponds to GPCM error */ +#define IFC_GPCM_ERATTR0_ERCS_CS0 0x00000000 +#define IFC_GPCM_ERATTR0_ERCS_CS1 0x00000040 +#define IFC_GPCM_ERATTR0_ERCS_CS2 0x00000080 +#define IFC_GPCM_ERATTR0_ERCS_CS3 0x000000C0 +/* Type of transaction read/Write */ +#define IFC_GPCM_ERATTR0_ERTYPE_READ 0x00000001 + +/* + * GPCM Transfer Error Attribute Register-2 (GPCM_ERATTR2) + */ +/* On which beat of address/data parity error is observed */ +#define IFC_GPCM_ERATTR2_PERR_BEAT 0x00000C00 +/* Parity Error on byte */ +#define IFC_GPCM_ERATTR2_PERR_BYTE 0x000000F0 +/* Parity Error reported in addr or data phase */ +#define IFC_GPCM_ERATTR2_PERR_DATA_PHASE 0x00000001 + +/* + * GPCM Status Register (GPCM_STAT) + */ +#define IFC_GPCM_STAT_BSY 0x80000000 /* GPCM is busy */ + + +#ifndef __ASSEMBLY__ +#include <asm/io.h> + +extern void print_ifc_regs(void); +extern void init_early_memctl_regs(void); + +#define IFC_BASE_ADDR ((struct fsl_ifc *)CONFIG_SYS_IFC_ADDR) + +#define get_ifc_cspr(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr)) +#define get_ifc_csor(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor)) +#define get_ifc_amask(i) (in_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask)) +#define get_ifc_ftim(i, j) (in_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j])) + +#define set_ifc_cspr(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v)) +#define set_ifc_csor(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v)) +#define set_ifc_amask(i, v) (out_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v)) +#define set_ifc_ftim(i, j, v) \ + (out_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v)) + +#define FSL_IFC_BANK_COUNT 4 + +enum ifc_chip_sel { + IFC_CS0, + IFC_CS1, + IFC_CS2, + IFC_CS3, +}; + +enum ifc_ftims { + IFC_FTIM0, + IFC_FTIM1, + IFC_FTIM2, + IFC_FTIM3, +}; + +/* + * IFC Controller NAND Machine registers + */ +struct fsl_ifc_nand { + u32 ncfgr; + u32 res1[0x4]; + u32 nand_fcr0; + u32 nand_fcr1; + u32 res2[0x8]; + u32 row0; + u32 res3; + u32 col0; + u32 res4; + u32 row1; + u32 res5; + u32 col1; + u32 res6; + u32 row2; + u32 res7; + u32 col2; + u32 res8; + u32 row3; + u32 res9; + u32 col3; + u32 res10[0x24]; + u32 nand_fbcr; + u32 res11; + u32 nand_fir0; + u32 nand_fir1; + u32 nand_fir2; + u32 res12[0x10]; + u32 nand_csel; + u32 res13; + u32 nandseq_strt; + u32 res14; + u32 nand_evter_stat; + u32 res15; + u32 pgrdcmpl_evt_stat; + u32 res16[0x2]; + u32 nand_evter_en; + u32 res17[0x2]; + u32 nand_evter_intr_en; + u32 res18[0x2]; + u32 nand_erattr0; + u32 nand_erattr1; + u32 res19[0x10]; + u32 nand_fsr; + u32 res20; + u32 nand_eccstat0; + u32 nand_eccstat1; + u32 nand_eccstat2; + u32 nand_eccstat3; + u32 res21[0x20]; + u32 nanndcr; + u32 res22[0x2]; + u32 nand_autoboot_trgr; + u32 res23; + u32 nand_mdr; + u32 res24[0x5C]; +}; + +/* + * IFC controller NOR Machine registers + */ +struct fsl_ifc_nor { + u32 nor_evter_stat; + u32 res1[0x2]; + u32 nor_evter_en; + u32 res2[0x2]; + u32 nor_evter_intr_en; + u32 res3[0x2]; + u32 nor_erattr0; + u32 nor_erattr1; + u32 nor_erattr2; + u32 res4[0x4]; + u32 norcr; + u32 res5[0xEF]; +}; + +/* + * IFC controller GPCM Machine registers + */ +struct fsl_ifc_gpcm { + u32 gpcm_evter_stat; + u32 res1[0x2]; + u32 gpcm_evter_en; + u32 res2[0x2]; + u32 gpcm_evter_intr_en; + u32 res3[0x2]; + u32 gpcm_erattr0; + u32 gpcm_erattr1; + u32 gpcm_erattr2; + u32 gpcm_stat; + u32 res4[0x1F3]; +}; + + +/* + * IFC Controller Registers + */ +struct fsl_ifc { + u32 ifc_rev; + u32 res1[0x3]; + struct { + u32 cspr; + u32 res2[0x2]; + } cspr_cs[FSL_IFC_BANK_COUNT]; + u32 res3[0x18]; + struct { + u32 amask; + u32 res4[0x2]; + } amask_cs[FSL_IFC_BANK_COUNT]; + u32 res5[0x18]; + struct { + u32 csor; + u32 res6[0x2]; + } csor_cs[FSL_IFC_BANK_COUNT]; + u32 res7[0x18]; + struct { + u32 ftim[4]; + u32 res8[0x8]; + } ftim_cs[FSL_IFC_BANK_COUNT]; + u32 res9[0x60]; + u32 rb_stat; + u32 res10[0x2]; + u32 ifc_gcr; + u32 res11[0x2]; + u32 cm_evter_stat; + u32 res12[0x2]; + u32 cm_evter_en; + u32 res13[0x2]; + u32 cm_evter_intr_en; + u32 res14[0x2]; + u32 cm_erattr0; + u32 cm_erattr1; + u32 res15[0x2]; + u32 ifc_ccr; + u32 ifc_csr; + u32 res16[0x2EB]; + struct fsl_ifc_nand ifc_nand; + struct fsl_ifc_nor ifc_nor; + struct fsl_ifc_gpcm ifc_gpcm; +}; + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_PPC_FSL_IFC_H */ diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index 6a4279ce987..13caffd96e2 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -1,5 +1,5 @@ /* - * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -83,6 +83,7 @@ enum law_trgt_if { LAW_TRGT_IF_DDR_INTRLV = 0x0b, LAW_TRGT_IF_RIO = 0x0c, LAW_TRGT_IF_RIO_2 = 0x0d, + LAW_TRGT_IF_DPAA_SWP_SRAM = 0x0e, LAW_TRGT_IF_DDR = 0x0f, LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */ }; @@ -91,6 +92,7 @@ enum law_trgt_if { #define LAW_TRGT_IF_PCIX LAW_TRGT_IF_PCI #define LAW_TRGT_IF_PCIE_2 LAW_TRGT_IF_PCI_2 #define LAW_TRGT_IF_RIO_1 LAW_TRGT_IF_RIO +#define LAW_TRGT_IF_IFC LAW_TRGT_IF_LBC #ifdef CONFIG_MPC8641 #define LAW_TRGT_IF_PCIE_1 LAW_TRGT_IF_PCI diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 4c17fe232e6..0ec5c0a3f57 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -70,8 +70,8 @@ extern void fdt_fixup_liodn(void *blob); SET_GUTS_LIODN("fsl,pq-sata-v2", liodn, sata##sataNum##liodnr,\ CONFIG_SYS_MPC85xx_SATA##sataNum##_OFFSET) -#define SET_PCI_LIODN(pciNum, liodn) \ - SET_GUTS_LIODN("fsl,p4080-pcie", liodn, pex##pciNum##liodnr,\ +#define SET_PCI_LIODN(compat, pciNum, liodn) \ + SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\ CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET) /* reg nodes for DMA start @ 0x300 */ @@ -85,13 +85,13 @@ extern void fdt_fixup_liodn(void *blob); #define SET_QMAN_LIODN(liodn) \ SET_LIODN_ENTRY_1("fsl,qman", liodn, offsetof(ccsr_qman_t, liodnr) + \ - CONFIG_SYS_FSL_CORENET_QMAN_OFFSET, \ - CONFIG_SYS_FSL_CORENET_QMAN_OFFSET) + CONFIG_SYS_FSL_QMAN_OFFSET, \ + CONFIG_SYS_FSL_QMAN_OFFSET) #define SET_BMAN_LIODN(liodn) \ SET_LIODN_ENTRY_1("fsl,bman", liodn, offsetof(ccsr_bman_t, liodnr) + \ - CONFIG_SYS_FSL_CORENET_BMAN_OFFSET, \ - CONFIG_SYS_FSL_CORENET_BMAN_OFFSET) + CONFIG_SYS_FSL_BMAN_OFFSET, \ + CONFIG_SYS_FSL_BMAN_OFFSET) #define SET_PME_LIODN(liodn) \ SET_LIODN_ENTRY_1("fsl,pme", liodn, offsetof(ccsr_pme_t, liodnr) + \ diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index 0a98bdee361..82d75bef6aa 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -25,6 +25,9 @@ #include <asm/fsl_serdes.h> #include <pci.h> +#define PEX_IP_BLK_REV_2_2 0x02080202 +#define PEX_IP_BLK_REV_2_3 0x02080203 + int fsl_setup_hose(struct pci_controller *hose, unsigned long addr); int fsl_is_pci_agent(struct pci_controller *hose); void fsl_pci_config_unlock(struct pci_controller *hose); @@ -73,7 +76,8 @@ typedef struct ccsr_pci { u32 out_comp_to; /* 0x00C - PCI Outbound Completion Timeout Register */ u32 out_conf_to; /* 0x010 - PCI Configuration Timeout Register */ u32 config; /* 0x014 - PCIE CONFIG Register */ - char res2[8]; + u32 int_status; /* 0x018 - PCIE interrupt status register */ + char res2[4]; u32 pme_msg_det; /* 0x020 - PCIE PME & message detect register */ u32 pme_msg_dis; /* 0x024 - PCIE PME & message disable register */ u32 pme_msg_int_en; /* 0x028 - PCIE PME & message interrupt enable register */ @@ -83,8 +87,11 @@ typedef struct ccsr_pci { u32 block_rev2; /* 0xbfc - PCIE Block Revision register 2 */ pot_t pot[5]; /* 0xc00 - 0xc9f Outbound ATMU's 0, 1, 2, 3, and 4 */ - u32 res5[64]; - pit_t pit[3]; /* 0xda0 - 0xdff Inbound ATMU's 3, 2, and 1 */ + u32 res5[24]; + pit_t pmit; /* 0xd00 - 0xd9c Inbound ATMU's MSI */ + u32 res6[24]; + pit_t pit[4]; /* 0xd80 - 0xdff Inbound ATMU's 3, 2, 1 and 0 */ + #define PIT3 0 #define PIT2 1 #define PIT1 2 @@ -158,6 +165,11 @@ typedef struct ccsr_pci { u32 pdb_stat; /* 0xf00 - PCIE Debug Status */ char res24[252]; } ccsr_fsl_pci_t; +#define PCIE_CONFIG_PC 0x00020000 +#define PCIE_CONFIG_OB_CK 0x00002000 +#define PCIE_CONFIG_SAC 0x00000010 +#define PCIE_CONFIG_SP 0x80000002 +#define PCIE_CONFIG_SCC 0x80000001 struct fsl_pci_info { unsigned long regs; diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 6bd83ba1661..d26d648b139 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -31,6 +31,7 @@ #include <asm/types.h> #include <asm/fsl_dma.h> #include <asm/fsl_i2c.h> +#include <asm/fsl_ifc.h> #include <asm/fsl_lbc.h> #include <asm/fsl_fman.h> @@ -1864,8 +1865,13 @@ typedef struct ccsr_gur { #define MPC85xx_PORBMSR_HA_SHIFT 16 u32 porimpscr; /* POR I/O impedance status & control */ u32 pordevsr; /* POR I/O device status regsiter */ +#if defined(CONFIG_P1017) || defined(CONFIG_P1023) +#define MPC85xx_PORDEVSR_SGMII1_DIS 0x10000000 +#define MPC85xx_PORDEVSR_SGMII2_DIS 0x08000000 +#else #define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000 #define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000 +#endif #define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000 #define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000 #define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000 @@ -1873,9 +1879,17 @@ typedef struct ccsr_gur { #if defined(CONFIG_P1013) || defined(CONFIG_P1022) #define MPC85xx_PORDEVSR_IO_SEL 0x007c0000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 18 +#elif defined(CONFIG_P1017) || defined(CONFIG_P1023) +#define MPC85xx_PORDEVSR_IO_SEL 0x00600000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 +#else +#if defined(CONFIG_P1010) +#define MPC85xx_PORDEVSR_IO_SEL 0x00600000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 +#endif /* if defined(CONFIG_P1010) */ #endif #define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000 #define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000 @@ -2190,8 +2204,8 @@ typedef struct ccsr_pme { #define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x221000 #define CONFIG_SYS_FSL_SEC_OFFSET 0x300000 #define CONFIG_SYS_FSL_CORENET_PME_OFFSET 0x316000 -#define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000 -#define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000 +#define CONFIG_SYS_FSL_QMAN_OFFSET 0x318000 +#define CONFIG_SYS_FSL_BMAN_OFFSET 0x31a000 #define CONFIG_SYS_FSL_FM1_OFFSET 0x400000 #define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET 0x488000 #define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET 0x489000 @@ -2227,6 +2241,7 @@ typedef struct ccsr_pme { #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0xF000 #define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x18000 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000 +#define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x1e000 #define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000 #define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000 #define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000 @@ -2240,6 +2255,12 @@ typedef struct ccsr_pme { #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 #define CONFIG_SYS_MPC85xx_CPM_OFFSET 0x80000 +#define CONFIG_SYS_FSL_QMAN_OFFSET 0x88000 +#define CONFIG_SYS_FSL_BMAN_OFFSET 0x8a000 +#define CONFIG_SYS_FSL_FM1_OFFSET 0x100000 +#define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET 0x188000 +#define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET 0x189000 +#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0x1e0000 #endif #define CONFIG_SYS_MPC85xx_PIC_OFFSET 0x40000 @@ -2247,10 +2268,10 @@ typedef struct ccsr_pme { #define CONFIG_SYS_FSL_CPC_ADDR \ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET) -#define CONFIG_SYS_FSL_CORENET_QMAN_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET) -#define CONFIG_SYS_FSL_CORENET_BMAN_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_BMAN_OFFSET) +#define CONFIG_SYS_FSL_QMAN_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_QMAN_OFFSET) +#define CONFIG_SYS_FSL_BMAN_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_BMAN_OFFSET) #define CONFIG_SYS_FSL_CORENET_PME_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_PME_OFFSET) #define CONFIG_SYS_MPC85xx_GUTS_ADDR \ @@ -2269,6 +2290,8 @@ typedef struct ccsr_pme { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET) #define CONFIG_SYS_LBC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET) +#define CONFIG_SYS_IFC_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_IFC_OFFSET) #define CONFIG_SYS_MPC85xx_ESPI_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET) #define CONFIG_SYS_MPC85xx_PCIX_ADDR \ diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h index 531cfc891d7..9be9dca1f73 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -3,7 +3,7 @@ * The Internal Memory Map for devices with QE on them. This * is the superset of all QE devices (8360, etc.). * - * Copyright (c) 2006-2009 Freescale Semiconductor, Inc. + * Copyright (c) 2006-2009, 2011 Freescale Semiconductor, Inc. * Author: Shlomi Gridih <gridish@freescale.com> * * This program is free software; you can redistribute it and/or modify it @@ -15,8 +15,19 @@ #ifndef __IMMAP_QE_H__ #define __IMMAP_QE_H__ -/* QE I-RAM -*/ +#ifdef CONFIG_MPC83xx +#if defined(CONFIG_MPC8360) +#define QE_MURAM_SIZE 0xc000UL +#define MAX_QE_RISC 2 +#define QE_NUM_OF_SNUM 28 +#elif defined(CONFIG_MPC832x) +#define QE_MURAM_SIZE 0x4000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 +#endif +#endif + +/* QE I-RAM */ typedef struct qe_iram { u32 iadd; /* I-RAM Address Register */ u32 idata; /* I-RAM Data Register */ @@ -25,8 +36,7 @@ typedef struct qe_iram { u8 res1[0x70]; } __attribute__ ((packed)) qe_iram_t; -/* QE Interrupt Controller -*/ +/* QE Interrupt Controller */ typedef struct qe_ic { u32 qicr; u32 qivec; @@ -49,8 +59,7 @@ typedef struct qe_ic { u8 res3[0x1C]; } __attribute__ ((packed)) qe_ic_t; -/* Communications Processor -*/ +/* Communications Processor */ typedef struct cp_qe { u32 cecr; /* QE command register */ u32 ceccr; /* QE controller configuration register */ @@ -87,8 +96,7 @@ typedef struct cp_qe { u8 res13[0x280]; } __attribute__ ((packed)) cp_qe_t; -/* QE Multiplexer -*/ +/* QE Multiplexer */ typedef struct qe_mux { u32 cmxgcr; /* CMX general clock route register */ u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ @@ -102,8 +110,7 @@ typedef struct qe_mux { u8 res0[0x1C]; } __attribute__ ((packed)) qe_mux_t; -/* QE Timers -*/ +/* QE Timers */ typedef struct qe_timers { u8 gtcfr1; /* Timer 1 2 global configuration register */ u8 res0[0x3]; @@ -133,8 +140,7 @@ typedef struct qe_timers { u8 res2[0x46]; } __attribute__ ((packed)) qe_timers_t; -/* BRG -*/ +/* BRG */ typedef struct qe_brg { u32 brgc1; /* BRG1 configuration register */ u32 brgc2; /* BRG2 configuration register */ @@ -155,8 +161,7 @@ typedef struct qe_brg { u8 res0[0x40]; } __attribute__ ((packed)) qe_brg_t; -/* SPI -*/ +/* SPI */ typedef struct spi { u8 res0[0x20]; u32 spmode; /* SPI mode register */ @@ -174,8 +179,7 @@ typedef struct spi { u8 res7[0x8]; } __attribute__ ((packed)) spi_t; -/* SI -*/ +/* SI */ typedef struct si1 { u16 siamr1; /* SI1 TDMA mode register */ u16 sibmr1; /* SI1 TDMB mode register */ @@ -222,16 +226,14 @@ typedef struct si1 { u8 res9[0xBB]; } __attribute__ ((packed)) si1_t; -/* SI Routing Tables -*/ +/* SI Routing Tables */ typedef struct sir { u8 tx[0x400]; u8 rx[0x400]; u8 res0[0x800]; } __attribute__ ((packed)) sir_t; -/* USB Controller. -*/ +/* USB Controller. */ typedef struct usb_ctlr { u8 usb_usmod; u8 usb_usadr; @@ -253,8 +255,7 @@ typedef struct usb_ctlr { u8 res6[0x22]; } __attribute__ ((packed)) usb_t; -/* MCC -*/ +/* MCC */ typedef struct mcc { u32 mcce; /* MCC event register */ u32 mccm; /* MCC mask register */ @@ -263,8 +264,7 @@ typedef struct mcc { u8 res0[0xF0]; } __attribute__ ((packed)) mcc_t; -/* QE UCC Slow -*/ +/* QE UCC Slow */ typedef struct ucc_slow { u32 gumr_l; /* UCCx general mode register (low) */ u32 gumr_h; /* UCCx general mode register (high) */ @@ -368,8 +368,7 @@ typedef struct ucc_ethernet { u8 res5[0x200 - 0x1c4]; } __attribute__ ((packed)) uec_t; -/* QE UCC Fast -*/ +/* QE UCC Fast */ typedef struct ucc_fast { u32 gumr; /* UCCx general mode register */ u32 upsmr; /* UCCx protocol-specific mode register */ @@ -403,8 +402,7 @@ typedef struct ucc_fast { uec_t ucc_eth; } __attribute__ ((packed)) ucc_fast_t; -/* QE UCC -*/ +/* QE UCC */ typedef struct ucc_common { u8 res1[0x90]; u8 guemr; @@ -419,8 +417,7 @@ typedef struct ucc { }; } __attribute__ ((packed)) ucc_t; -/* MultiPHY UTOPIA POS Controllers (UPC) -*/ +/* MultiPHY UTOPIA POS Controllers (UPC) */ typedef struct upc { u32 upgcr; /* UTOPIA/POS general configuration register */ u32 uplpa; /* UTOPIA/POS last PHY address */ @@ -476,8 +473,7 @@ typedef struct upc { u8 res2[0x150]; } __attribute__ ((packed)) upc_t; -/* SDMA -*/ +/* SDMA */ typedef struct sdma { u32 sdsr; /* Serial DMA status register */ u32 sdmr; /* Serial DMA mode register */ @@ -497,8 +493,7 @@ typedef struct sdma { u8 res2[0x38]; } __attribute__ ((packed)) sdma_t; -/* Debug Space -*/ +/* Debug Space */ typedef struct dbg { u32 bpdcr; /* Breakpoint debug command register */ u32 bpdsr; /* Breakpoint debug status register */ @@ -582,40 +577,9 @@ typedef struct qe_immap { u8 res14[0x300]; u8 res15[0x3A00]; u8 res16[0x8000]; /* 0x108000 - 0x110000 */ -#if defined(CONFIG_MPC8568) - u8 muram[0x10000]; /* 0x1_0000 - 0x2_0000 Multi-user RAM */ - u8 res17[0x20000]; /* 0x2_0000 - 0x4_0000 */ -#elif defined(CONFIG_MPC8569) - u8 muram[0x20000]; /* 0x1_0000 - 0x3_0000 Multi-user RAM */ - u8 res17[0x10000]; /* 0x3_0000 - 0x4_0000 */ -#else - u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ - u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ - u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ -#endif + u8 muram[QE_MURAM_SIZE]; } __attribute__ ((packed)) qe_map_t; extern qe_map_t *qe_immr; -#if defined(CONFIG_MPC8568) -#define QE_MURAM_SIZE 0x10000UL -#elif defined(CONFIG_MPC8569) -#define QE_MURAM_SIZE 0x20000UL -#elif defined(CONFIG_MPC8360) -#define QE_MURAM_SIZE 0xc000UL -#elif defined(CONFIG_MPC832x) -#define QE_MURAM_SIZE 0x4000UL -#endif - -#if defined(CONFIG_MPC8323) -#define MAX_QE_RISC 1 -#define QE_NUM_OF_SNUM 28 -#elif defined(CONFIG_MPC8569) -#define MAX_QE_RISC 4 -#define QE_NUM_OF_SNUM 46 -#else -#define MAX_QE_RISC 2 -#define QE_NUM_OF_SNUM 28 -#endif - #endif /* __IMMAP_QE_H__ */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index fcee1a24285..f5bf4dd4fd4 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1048,12 +1048,24 @@ #define SVR_P1013_E 0x80EF00 #define SVR_P1014 0x80F101 #define SVR_P1014_E 0x80F901 +#define SVR_P1015 0x80E502 +#define SVR_P1015_E 0x80ED02 +#define SVR_P1016 0x80E503 +#define SVR_P1016_E 0x80ED03 +#define SVR_P1017 0x80F700 +#define SVR_P1017_E 0x80FF00 #define SVR_P1020 0x80E400 #define SVR_P1020_E 0x80EC00 #define SVR_P1021 0x80E401 #define SVR_P1021_E 0x80EC01 #define SVR_P1022 0x80E600 #define SVR_P1022_E 0x80EE00 +#define SVR_P1023 0x80F600 +#define SVR_P1023_E 0x80FE00 +#define SVR_P1024 0x80E402 +#define SVR_P1024_E 0x80EC02 +#define SVR_P1025 0x80E403 +#define SVR_P1025_E 0x80EC03 #define SVR_P2010 0x80E300 #define SVR_P2010_E 0x80EB00 #define SVR_P2020 0x80E200 diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 4719f8c6967..83fb0744f54 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -186,6 +186,12 @@ int __board_flash_wp_on(void) } int board_flash_wp_on(void) __attribute__((weak, alias("__board_flash_wp_on"))); +void __cpu_secondary_init_r(void) +{ +} +void cpu_secondary_init_r(void) +__attribute__((weak, alias("__cpu_secondary_init_r"))); + static int init_func_ram (void) { #ifdef CONFIG_BOARD_TYPES @@ -798,6 +804,14 @@ void board_init_r (gd_t *id, ulong dest_addr) env_relocate (); /* + * after non-volatile devices & environment is setup and cpu code have + * another round to deal with any initialization that might require + * full access to the environment or loading of some image (firmware) + * from a non-volatile device + */ + cpu_secondary_init_r(); + + /* * Fill in missing fields of bd_info. * We do this here, where we have "normal" access to the * environment; we used to do this still running from ROM, diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c index 116d81bec6b..c7f3d084a3a 100644 --- a/arch/powerpc/lib/bootm.c +++ b/arch/powerpc/lib/bootm.c @@ -33,6 +33,7 @@ #include <bzlib.h> #include <environment.h> #include <asm/byteorder.h> +#include <asm/mp.h> #if defined(CONFIG_OF_LIBFDT) #include <fdt.h> @@ -166,6 +167,10 @@ void arch_lmb_reserve(struct lmb *lmb) sp -= 4096; lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - sp)); +#ifdef CONFIG_MP + cpu_mp_lmb_reserve(lmb); +#endif + return ; } diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 1abd3e56703..8ea5acb5de4 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -36,6 +36,7 @@ COBJS-$(CONFIG_FSL_NGPIXIS) += ngpixis.o COBJS-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o COBJS-$(CONFIG_ID_EEPROM) += sys_eeprom.o COBJS-$(CONFIG_FSL_SGMII_RISER) += sgmii_riser.o +COBJS-$(CONFIG_ENV_IS_IN_MMC) += sdhc_boot.o COBJS-$(CONFIG_MPC8541CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8548CDS) += cds_pci_ft.o diff --git a/board/freescale/common/ngpixis.c b/board/freescale/common/ngpixis.c index a135fbe5ef5..4e01e5a0a2e 100644 --- a/board/freescale/common/ngpixis.c +++ b/board/freescale/common/ngpixis.c @@ -1,5 +1,5 @@ /** - * Copyright 2010 Freescale Semiconductor + * Copyright 2010-2011 Freescale Semiconductor * Author: Timur Tabi <timur@freescale.com> * * This program is free software; you can redistribute it and/or modify it @@ -35,61 +35,89 @@ #include <common.h> #include <command.h> -#include <watchdog.h> -#include <asm/cache.h> #include <asm/io.h> #include "ngpixis.h" +static u8 __pixis_read(unsigned int reg) +{ + void *p = (void *)PIXIS_BASE; + + return in_8(p + reg); +} +u8 pixis_read(unsigned int reg) __attribute__((weak, alias("__pixis_read"))); + +static void __pixis_write(unsigned int reg, u8 value) +{ + void *p = (void *)PIXIS_BASE; + + out_8(p + reg, value); +} +void pixis_write(unsigned int reg, u8 value) + __attribute__((weak, alias("__pixis_write"))); + /* * Reset the board. This ignores the ENx registers. */ -void pixis_reset(void) +void __pixis_reset(void) { - out_8(&pixis->rst, 0); + PIXIS_WRITE(rst, 0); while (1); } +void pixis_reset(void) __attribute__((weak, alias("__pixis_reset"))); /* * Reset the board. Like pixis_reset(), but it honors the ENx registers. */ -void pixis_bank_reset(void) +void __pixis_bank_reset(void) { - out_8(&pixis->vctl, 0); - out_8(&pixis->vctl, 1); + PIXIS_WRITE(vctl, 0); + PIXIS_WRITE(vctl, 1); while (1); } +void pixis_bank_reset(void) __attribute__((weak, alias("__pixis_bank_reset"))); /** * Set the boot bank to the power-on default bank */ -void clear_altbank(void) +void __clear_altbank(void) { + u8 reg; + /* Tell the ngPIXIS to use this the bits in the physical switch for the * boot bank value, instead of the SWx register. We need to be careful * only to set the bits in SWx that correspond to the boot bank. */ - clrbits_8(&PIXIS_EN(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK); + reg = PIXIS_READ(s[PIXIS_LBMAP_SWITCH - 1].en); + reg &= ~PIXIS_LBMAP_MASK; + PIXIS_WRITE(s[PIXIS_LBMAP_SWITCH - 1].en, reg); } +void clear_altbank(void) __attribute__((weak, alias("__clear_altbank"))); /** * Set the boot bank to the alternate bank */ -void set_altbank(void) +void __set_altbank(void) { + u8 reg; + /* Program the alternate bank number into the SWx register. */ - clrsetbits_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK, - PIXIS_LBMAP_ALTBANK); + reg = PIXIS_READ(s[PIXIS_LBMAP_SWITCH - 1].sw); + reg = (reg & ~PIXIS_LBMAP_MASK) | PIXIS_LBMAP_ALTBANK; + PIXIS_WRITE(s[PIXIS_LBMAP_SWITCH - 1].sw, reg); /* Tell the ngPIXIS to use this the bits in the SWx register for the * boot bank value, instead of the physical switch. We need to be * careful only to set the bits in SWx that correspond to the boot bank. */ - setbits_8(&PIXIS_EN(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK); + reg = PIXIS_READ(s[PIXIS_LBMAP_SWITCH - 1].en); + reg |= PIXIS_LBMAP_MASK; + PIXIS_WRITE(s[PIXIS_LBMAP_SWITCH - 1].en, reg); } +void set_altbank(void) __attribute__((weak, alias("__set_altbank"))); int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h index 089408b769d..681b0d0b912 100644 --- a/board/freescale/common/ngpixis.h +++ b/board/freescale/common/ngpixis.h @@ -1,5 +1,5 @@ /** - * Copyright 2010 Freescale Semiconductor + * Copyright 2010-2011 Freescale Semiconductor * Author: Timur Tabi <timur@freescale.com> * * This program is free software; you can redistribute it and/or modify it @@ -55,3 +55,9 @@ typedef struct ngpixis { /* The PIXIS EN register that corresponds to board switch X, where x >= 1 */ #define PIXIS_EN(x) (pixis->s[(x) - 1].en) + +u8 pixis_read(unsigned int reg); +void pixis_write(unsigned int reg, u8 value); + +#define PIXIS_READ(reg) pixis_read(offsetof(ngpixis_t, reg)) +#define PIXIS_WRITE(reg, value) pixis_write(offsetof(ngpixis_t, reg), value) diff --git a/board/freescale/common/sdhc_boot.c b/board/freescale/common/sdhc_boot.c new file mode 100644 index 00000000000..964c6b830c1 --- /dev/null +++ b/board/freescale/common/sdhc_boot.c @@ -0,0 +1,64 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mmc.h> +#include <malloc.h> + +/* + * The environment variables are written to just after the u-boot image + * on SDCard, so we must read the MBR to get the start address and code + * length of the u-boot image, then calculate the address of the env. + */ +#define ESDHC_BOOT_IMAGE_SIZE 0x48 +#define ESDHC_BOOT_IMAGE_ADDR 0x50 + +int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) +{ + u8 *tmp_buf; + u32 blklen, code_offset, code_len, n; + + blklen = mmc->read_bl_len; + tmp_buf = malloc(blklen); + if (!tmp_buf) + return 1; + + /* read out the first block, get the config data information */ + n = mmc->block_dev.block_read(mmc->block_dev.dev, 0, 1, tmp_buf); + if (!n) { + free(tmp_buf); + return 1; + } + + /* Get the Source Address, from offset 0x50 */ + code_offset = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_ADDR); + + /* Get the code size from offset 0x48 */ + code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE); + + *env_addr = code_offset + code_len; + + free(tmp_buf); + + return 0; +} + diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 3ecfb06cc84..d2ed0361e24 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -1,5 +1,5 @@ /* - * Copyright 2006, 2008-2009 Freescale Semiconductor + * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor * York Sun (yorksun@freescale.com) * Haiying Wang (haiying.wang@freescale.com) * Timur Tabi (timur@freescale.com) @@ -34,12 +34,6 @@ #endif #ifdef CONFIG_SYS_I2C_EEPROM_NXID -#define MAX_NUM_PORTS 8 -#define NXID_VERSION 0 -#endif - -#ifdef CONFIG_SYS_I2C_EEPROM_NXID_1 -#define CONFIG_SYS_I2C_EEPROM_NXID #define MAX_NUM_PORTS 23 #define NXID_VERSION 1 #endif @@ -428,11 +422,16 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * This ensures that any user-saved variables are never overwritten. * * This function must be called after relocation. + * + * For NXID v1 EEPROMs, we support loading and up-converting the older NXID v0 + * format. In a v0 EEPROM, there are only eight MAC addresses and the CRC is + * located at a different offset. */ int mac_read_from_eeprom(void) { unsigned int i; - u32 crc; + u32 crc, crc_offset = offsetof(struct eeprom, crc); + u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ puts("EEPROM: "); @@ -447,12 +446,32 @@ int mac_read_from_eeprom(void) return -1; } - crc = crc32(0, (void *)&e, sizeof(e) - 4); - if (crc != be32_to_cpu(e.crc)) { +#ifdef CONFIG_SYS_I2C_EEPROM_NXID + /* + * If we've read an NXID v0 EEPROM, then we need to set the CRC offset + * to where it is in v0. + */ + if (e.version == 0) + crc_offset = 0x72; +#endif + + crc = crc32(0, (void *)&e, crc_offset); + crcp = (void *)&e + crc_offset; + if (crc != be32_to_cpu(*crcp)) { printf("CRC mismatch (%08x != %08x)\n", crc, be32_to_cpu(e.crc)); return -1; } +#ifdef CONFIG_SYS_I2C_EEPROM_NXID + /* + * MAC address #9 in v1 occupies the same position as the CRC in v0. + * Erase it so that it's not mistaken for a MAC address. We'll + * update the CRC later. + */ + if (e.version == 0) + memset(e.mac[8], 0xff, 6); +#endif + for (i = 0; i < min(e.mac_count, MAX_NUM_PORTS); i++) { if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) && memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { @@ -482,6 +501,17 @@ int mac_read_from_eeprom(void) printf("%c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); #endif +#ifdef CONFIG_SYS_I2C_EEPROM_NXID + /* + * Now we need to upconvert the data into v1 format. We do this last so + * that at boot time, U-Boot will still say "NXID v0". + */ + if (e.version == 0) { + e.version = NXID_VERSION; + update_crc(); + } +#endif + return 0; } diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index 232dc7297a0..3db93c36446 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -39,8 +39,6 @@ extern void pci_of_setup(void *blob, bd_t *bd); DECLARE_GLOBAL_DATA_PTR; -void cpu_mp_lmb_reserve(struct lmb *lmb); - int checkboard (void) { u8 sw; @@ -186,13 +184,6 @@ int misc_init_r(void) return 0; } -#ifdef CONFIG_MP -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif - void ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index 07b950f4ba7..98024c72d7f 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -16,9 +16,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); - /* * Fixed sdram init -- doesn't use serial presence detect. @@ -31,19 +28,21 @@ extern fixed_ddr_parm_t fixed_ddr_parm_1[]; phys_size_t fixed_sdram(void) { int i; - sys_info_t sysinfo; char buf[32]; fsl_ddr_cfg_regs_t ddr_cfg_regs; phys_size_t ddr_size; unsigned int lawbar1_target_id; + ulong ddr_freq, ddr_freq_mhz; + + ddr_freq = get_ddr_freq(0); + ddr_freq_mhz = ddr_freq / 1000000; - get_sys_info(&sysinfo); printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, sysinfo.freqDDRBus)); + strmhz(buf, ddr_freq)); for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) { - if ((sysinfo.freqDDRBus > fixed_ddr_parm_0[i].min_freq) && - (sysinfo.freqDDRBus <= fixed_ddr_parm_0[i].max_freq)) { + if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) && + (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) { memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings, sizeof(ddr_cfg_regs)); @@ -53,7 +52,7 @@ phys_size_t fixed_sdram(void) if (fixed_ddr_parm_0[i].max_freq == 0) panic("Unsupported DDR data rate %s MT/s data rate\n", - strmhz(buf, sysinfo.freqDDRBus)); + strmhz(buf, ddr_freq)); ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; @@ -108,38 +107,6 @@ phys_size_t fixed_sdram(void) return ddr_size; } -static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address) -{ - int ret; - - ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); - if (ret) { - debug("DDR: failed to read SPD from address %u\n", i2c_address); - memset(spd, 0, sizeof(ddr3_spd_eeprom_t)); - } -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) - i2c_address = SPD_EEPROM_ADDRESS1; - else if (ctrl_num == 1 && i == 0) - i2c_address = SPD_EEPROM_ADDRESS2; - - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - typedef struct { u32 datarate_mhz_low; u32 datarate_mhz_high; diff --git a/board/freescale/corenet_ds/p4080ds_ddr.c b/board/freescale/corenet_ds/p4080ds_ddr.c index 4ad89ff48a9..844e1d736a7 100644 --- a/board/freescale/corenet_ds/p4080ds_ddr.c +++ b/board/freescale/corenet_ds/p4080ds_ddr.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -9,12 +9,6 @@ #include <common.h> #include <asm/fsl_ddr_sdram.h> -#define DATARATE_800MHZ 800000000 -#define DATARATE_900MHZ 900000000 -#define DATARATE_1000MHZ 1000000000 -#define DATARATE_1200MHZ 1200000000 -#define DATARATE_1300MHZ 1300000000 - #define CONFIG_SYS_DDR_TIMING_3_1200 0x01030000 #define CONFIG_SYS_DDR_TIMING_0_1200 0xCC550104 #define CONFIG_SYS_DDR_TIMING_1_1200 0x868FAA45 @@ -340,17 +334,17 @@ fsl_ddr_cfg_regs_t ddr_cfg_regs_1200_2nd = { }; fixed_ddr_parm_t fixed_ddr_parm_0[] = { - {DATARATE_800MHZ, DATARATE_900MHZ, &ddr_cfg_regs_800}, - {DATARATE_900MHZ, DATARATE_1000MHZ, &ddr_cfg_regs_900}, - {DATARATE_1000MHZ, DATARATE_1200MHZ, &ddr_cfg_regs_1000}, - {DATARATE_1200MHZ, DATARATE_1300MHZ, &ddr_cfg_regs_1200}, + {750, 850, &ddr_cfg_regs_800}, + {850, 950, &ddr_cfg_regs_900}, + {950, 1050, &ddr_cfg_regs_1000}, + {1050, 1250, &ddr_cfg_regs_1200}, {0, 0, NULL} }; fixed_ddr_parm_t fixed_ddr_parm_1[] = { - {DATARATE_800MHZ, DATARATE_900MHZ, &ddr_cfg_regs_800_2nd}, - {DATARATE_900MHZ, DATARATE_1000MHZ, &ddr_cfg_regs_900_2nd}, - {DATARATE_1000MHZ, DATARATE_1200MHZ, &ddr_cfg_regs_1000_2nd}, - {DATARATE_1200MHZ, DATARATE_1300MHZ, &ddr_cfg_regs_1200_2nd}, + {750, 850, &ddr_cfg_regs_800_2nd}, + {850, 950, &ddr_cfg_regs_900_2nd}, + {950, 1050, &ddr_cfg_regs_1000_2nd}, + {1050, 1250, &ddr_cfg_regs_1200_2nd}, {0, 0, NULL} }; diff --git a/board/freescale/mpc8536ds/config.mk b/board/freescale/mpc8536ds/config.mk deleted file mode 100644 index 228d8c07f7e..00000000000 --- a/board/freescale/mpc8536ds/config.mk +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright 2008, 2011 Freescale Semiconductor. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# mpc8536ds board -# -ifndef NAND_SPL -ifeq ($(CONFIG_NAND), y) -LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds -endif -endif diff --git a/board/freescale/mpc8536ds/ddr.c b/board/freescale/mpc8536ds/ddr.c index 2bad787d606..d10370c9f20 100644 --- a/board/freescale/mpc8536ds/ddr.c +++ b/board/freescale/mpc8536ds/ddr.c @@ -7,36 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c index 93d1100717f..571137443eb 100644 --- a/board/freescale/mpc8540ads/ddr.c +++ b/board/freescale/mpc8540ads/ddr.c @@ -7,40 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8541cds/ddr.c b/board/freescale/mpc8541cds/ddr.c index c84a6cbe1c7..78d73b0ea88 100644 --- a/board/freescale/mpc8541cds/ddr.c +++ b/board/freescale/mpc8541cds/ddr.c @@ -7,36 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c index b8330eb961d..94219b9471e 100644 --- a/board/freescale/mpc8544ds/ddr.c +++ b/board/freescale/mpc8544ds/ddr.c @@ -7,37 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8548cds/ddr.c b/board/freescale/mpc8548cds/ddr.c index ab64fa88f26..996ffe206da 100644 --- a/board/freescale/mpc8548cds/ddr.c +++ b/board/freescale/mpc8548cds/ddr.c @@ -7,37 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8555cds/ddr.c b/board/freescale/mpc8555cds/ddr.c index c84a6cbe1c7..78d73b0ea88 100644 --- a/board/freescale/mpc8555cds/ddr.c +++ b/board/freescale/mpc8555cds/ddr.c @@ -7,36 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8560ads/ddr.c b/board/freescale/mpc8560ads/ddr.c index 93d1100717f..571137443eb 100644 --- a/board/freescale/mpc8560ads/ddr.c +++ b/board/freescale/mpc8560ads/ddr.c @@ -7,40 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8568mds/ddr.c b/board/freescale/mpc8568mds/ddr.c index 482fd919f54..b1f4f1f8481 100644 --- a/board/freescale/mpc8568mds/ddr.c +++ b/board/freescale/mpc8568mds/ddr.c @@ -7,38 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8569mds/config.mk b/board/freescale/mpc8569mds/config.mk deleted file mode 100644 index 54b2eb1ba1c..00000000000 --- a/board/freescale/mpc8569mds/config.mk +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright (C) 2009 Freescale Semiconductor, Inc. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# mpc8569mds board -# -ifndef NAND_SPL -ifeq ($(CONFIG_NAND), y) -LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds -endif -endif diff --git a/board/freescale/mpc8569mds/ddr.c b/board/freescale/mpc8569mds/ddr.c index e3f5b4aa21d..68f686b7e6a 100644 --- a/board/freescale/mpc8569mds/ddr.c +++ b/board/freescale/mpc8569mds/ddr.c @@ -7,38 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); -} - - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) - i2c_address = SPD_EEPROM_ADDRESS1; - if (ctrl_num == 0 && i == 1) - i2c_address = SPD_EEPROM_ADDRESS2; - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8572ds/config.mk b/board/freescale/mpc8572ds/config.mk deleted file mode 100644 index 9fd30f9a089..00000000000 --- a/board/freescale/mpc8572ds/config.mk +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# mpc8572ds board -# -ifndef NAND_SPL -ifeq ($(CONFIG_NAND), y) -LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds -endif -endif diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c index cdde6ec70fc..ab471afb977 100644 --- a/board/freescale/mpc8572ds/ddr.c +++ b/board/freescale/mpc8572ds/ddr.c @@ -7,38 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; - } - if (ctrl_num == 1 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS2; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - typedef struct { u32 datarate_mhz_low; u32 datarate_mhz_high; diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 4b2ef4e5e6c..f444805a4d3 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -259,12 +259,3 @@ void ft_board_setup(void *blob, bd_t *bd) #endif } #endif - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/freescale/mpc8610hpcd/ddr.c b/board/freescale/mpc8610hpcd/ddr.c index 0117d136bbb..94219b9471e 100644 --- a/board/freescale/mpc8610hpcd/ddr.c +++ b/board/freescale/mpc8610hpcd/ddr.c @@ -7,36 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_bus_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c index 8dc249b99dc..bd0b299d0b4 100644 --- a/board/freescale/mpc8641hpcn/ddr.c +++ b/board/freescale/mpc8641hpcn/ddr.c @@ -7,45 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_bus_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; - } - if (ctrl_num == 0 && i == 1) { - i2c_address = SPD_EEPROM_ADDRESS2; - } - if (ctrl_num == 1 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS3; - } - if (ctrl_num == 1 && i == 1) { - i2c_address = SPD_EEPROM_ADDRESS4; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - typedef struct { u32 datarate_mhz_low; u32 datarate_mhz_high; @@ -144,7 +109,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, /* Get clk_adjust, cpo, write_data_delay, according to the board ddr * freqency and n_banks specified in board_specific_parameters table. */ - ddr_freq = fsl_ddr_get_mem_data_rate() / 1000000; + ddr_freq = get_ddr_freq(0) / 1000000; for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { if (pdimm[j].n_ranks > 0) { for (i = 0; i < num_params; i++) { diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index 166ff0c97b0..cd2ce4b75ae 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -1,5 +1,5 @@ /* - * Copyright 2006, 2007, 2010 Freescale Semiconductor. + * Copyright 2006, 2007, 2010-2011 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -261,12 +261,3 @@ void board_reset(void) while (1) ; } - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c index 7ecfb3e81b5..20b996e52a9 100644 --- a/board/freescale/p1022ds/ddr.c +++ b/board/freescale/p1022ds/ddr.c @@ -10,33 +10,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, unsigned int ctrl_num) -{ - int ret; - - /* - * The P1022 has only one DDR controller, and the board has only one - * DIMM slot. - */ - ret = i2c_read(SPD_EEPROM_ADDRESS1, 0, 1, (u8 *)ctrl_dimms_spd, - sizeof(ddr3_spd_eeprom_t)); - if (ret) { - debug("DDR: failed to read SPD from address %u\n", - SPD_EEPROM_ADDRESS1); - memset(ctrl_dimms_spd, 0, sizeof(ddr3_spd_eeprom_t)); - } -} - typedef struct { u32 datarate_mhz_low; u32 datarate_mhz_high; diff --git a/board/freescale/p1022ds/diu.c b/board/freescale/p1022ds/diu.c index 8f5305ca1f9..b37e0e269b1 100644 --- a/board/freescale/p1022ds/diu.c +++ b/board/freescale/p1022ds/diu.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * Authors: Timur Tabi <timur@freescale.com> * * FSL DIU Framebuffer driver @@ -139,8 +139,6 @@ int platform_diu_init(unsigned int *xres, unsigned int *yres) return fsl_diu_init(*xres, pixel_format, 0); } -#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS - /* * set_mux_to_lbc - disable the DIU so that we can read/write to elbc * @@ -211,6 +209,68 @@ static void set_mux_to_diu(void) in_be32(&gur->pmuxcr); } +/* + * pixis_read - board-specific function to read from the PIXIS + * + * This function overrides the generic pixis_read() function, so that it can + * use PIXIS indirect mode if necessary. + */ +u8 pixis_read(unsigned int reg) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + /* Use indirect mode if the mux is currently set to DIU mode */ + if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) != + PMUXCR_ELBCDIU_NOR16) { + out_8(lbc_lcs0_ba, reg); + return in_8(lbc_lcs1_ba); + } else { + void *p = (void *)PIXIS_BASE; + + return in_8(p + reg); + } +} + +/* + * pixis_write - board-specific function to write to the PIXIS + * + * This function overrides the generic pixis_write() function, so that it can + * use PIXIS indirect mode if necessary. + */ +void pixis_write(unsigned int reg, u8 value) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + /* Use indirect mode if the mux is currently set to DIU mode */ + if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) != + PMUXCR_ELBCDIU_NOR16) { + out_8(lbc_lcs0_ba, reg); + out_8(lbc_lcs1_ba, value); + /* Do a read-back to ensure the write completed */ + in_8(lbc_lcs1_ba); + } else { + void *p = (void *)PIXIS_BASE; + + out_8(p + reg, value); + } +} + +void pixis_bank_reset(void) +{ + /* + * For some reason, a PIXIS bank reset does not work if the PIXIS is + * in indirect mode, so switch to direct mode first. + */ + set_mux_to_lbc(); + + out_8(&pixis->vctl, 0); + out_8(&pixis->vctl, 1); + + while (1); +} + +#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + void flash_write8(u8 value, void *addr) { int sw = set_mux_to_lbc(); diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index 0ea0bdf28e9..6f20dc3b9b6 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> * Timur Tabi <timur@freescale.com> * @@ -24,7 +24,6 @@ #include <fdt_support.h> #include <tsec.h> #include <asm/fsl_law.h> -#include <asm/mp.h> #include <netdev.h> #include <i2c.h> #include <hwconfig.h> @@ -54,6 +53,9 @@ int checkboard(void) u8 sw; puts("Board: P1022DS "); +#ifdef CONFIG_PHYS_64BIT + puts("(36-bit addrmap) "); +#endif printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); @@ -302,10 +304,3 @@ void ft_board_setup(void *blob, bd_t *bd) ft_codec_setup(blob, "wlf,wm8776"); } #endif - -#ifdef CONFIG_MP -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/freescale/p1_p2_rdb/config.mk b/board/freescale/p1_p2_rdb/config.mk deleted file mode 100644 index 076980498cc..00000000000 --- a/board/freescale/p1_p2_rdb/config.mk +++ /dev/null @@ -1,31 +0,0 @@ -# -# Copyright 2009, 2011 Freescale Semiconductor, Inc. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# p1_p2rdb board -# - -ifndef NAND_SPL -ifeq ($(CONFIG_NAND), y) -LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds -endif -endif diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index e54fde25309..71c60888ac1 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009, 2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -30,14 +30,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); - -#define DATARATE_400MHZ 400000000 -#define DATARATE_533MHZ 533333333 -#define DATARATE_667MHZ 666666666 -#define DATARATE_800MHZ 800000000 - #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 @@ -82,13 +74,13 @@ extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, #define CONFIG_SYS_DDR_INTERVAL_667 0x0a280100 #define CONFIG_SYS_DDR_TIMING_3_800 0x00040000 -#define CONFIG_SYS_DDR_TIMING_0_800 0x55770802 +#define CONFIG_SYS_DDR_TIMING_0_800 0x00770802 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b6543 #define CONFIG_SYS_DDR_TIMING_2_800 0x0fa074d1 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x02800000 #define CONFIG_SYS_DDR_MODE_1_800 0x00040852 #define CONFIG_SYS_DDR_MODE_2_800 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL_800 0x0a280100 +#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100 fsl_ddr_cfg_regs_t ddr_cfg_regs_400 = { .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, @@ -204,38 +196,47 @@ fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { phys_size_t fixed_sdram (void) { - sys_info_t sysinfo; char buf[32]; fsl_ddr_cfg_regs_t ddr_cfg_regs; size_t ddr_size; struct cpu_type *cpu; + ulong ddr_freq, ddr_freq_mhz; + + cpu = gd->cpu; + /* P1020 and it's derivatives support max 32bit DDR width */ + if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1020_E || + cpu->soc_ver == SVR_P1011 || cpu->soc_ver == SVR_P1011_E) { + ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2); + } else { + ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + } +#if defined(CONFIG_SYS_RAMBOOT) + return ddr_size; +#endif + ddr_freq = get_ddr_freq(0); + ddr_freq_mhz = ddr_freq / 1000000; - get_sys_info(&sysinfo); printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, sysinfo.freqDDRBus)); + strmhz(buf, ddr_freq)); - if(sysinfo.freqDDRBus <= DATARATE_400MHZ) + if(ddr_freq_mhz <= 400) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_400, sizeof(ddr_cfg_regs)); - else if(sysinfo.freqDDRBus <= DATARATE_533MHZ) + else if(ddr_freq_mhz <= 533) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_533, sizeof(ddr_cfg_regs)); - else if(sysinfo.freqDDRBus <= DATARATE_667MHZ) + else if(ddr_freq_mhz <= 667) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_667, sizeof(ddr_cfg_regs)); - else if(sysinfo.freqDDRBus <= DATARATE_800MHZ) + else if(ddr_freq_mhz <= 800) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_800, sizeof(ddr_cfg_regs)); else panic("Unsupported DDR data rate %s MT/s data rate\n", - strmhz(buf, sysinfo.freqDDRBus)); + strmhz(buf, ddr_freq)); - cpu = gd->cpu; /* P1020 and it's derivatives support max 32bit DDR width */ if(cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1020_E || cpu->soc_ver == SVR_P1011 || cpu->soc_ver == SVR_P1011_E) { ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_32_BE; ddr_cfg_regs.cs[0].bnds = 0x0000001F; - ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2); } - else - ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index 078094200fb..307c3e2564d 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -35,6 +35,7 @@ #include <vsc7385.h> #include <netdev.h> #include <rtc.h> +#include <i2c.h> DECLARE_GLOBAL_DATA_PTR; @@ -54,38 +55,25 @@ DECLARE_GLOBAL_DATA_PTR; #define SYSCLK_MASK 0x00200000 #define BOARDREV_MASK 0x10100000 -#define BOARDREV_B 0x10100000 #define BOARDREV_C 0x00100000 #define BOARDREV_D 0x00000000 #define SYSCLK_66 66666666 -#define SYSCLK_50 50000000 #define SYSCLK_100 100000000 unsigned long get_board_sys_clk(ulong dummy) { volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - u32 val_gpdat, sysclk_gpio, board_rev_gpio; + u32 val_gpdat, sysclk_gpio; val_gpdat = in_be32(&pgpio->gpdat); sysclk_gpio = val_gpdat & SYSCLK_MASK; - board_rev_gpio = val_gpdat & BOARDREV_MASK; - if (board_rev_gpio == BOARDREV_C) { - if(sysclk_gpio == 0) - return SYSCLK_66; - else - return SYSCLK_100; - } else if (board_rev_gpio == BOARDREV_B) { - if(sysclk_gpio == 0) - return SYSCLK_66; - else - return SYSCLK_50; - } else if (board_rev_gpio == BOARDREV_D) { - if(sysclk_gpio == 0) - return SYSCLK_66; - else - return SYSCLK_100; - } + + if(sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_100; + return 0; } @@ -112,8 +100,6 @@ int checkboard (void) board_rev_gpio = val_gpdat & BOARDREV_MASK; if (board_rev_gpio == BOARDREV_C) board_rev = 'C'; - else if (board_rev_gpio == BOARDREV_B) - board_rev = 'B'; else if (board_rev_gpio == BOARDREV_D) board_rev = 'D'; else @@ -121,6 +107,9 @@ int checkboard (void) cpu = gd->cpu; printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev); +#ifdef CONFIG_PHYS_64BIT + puts ("(36-bit addrmap) \n"); +#endif setbits_be32(&pgpio->gpdir, GPIO_DIR); /* @@ -142,6 +131,30 @@ int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + unsigned int orig_bus = i2c_get_bus_num(); + u8 i2c_data; + + i2c_set_bus_num(1); + if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, + 1, &i2c_data, sizeof(i2c_data)) == 0) { + if (i2c_data & 0x2) + puts("NOR Flash Bank : Secondary\n"); + else + puts("NOR Flash Bank : Primary\n"); + + if (i2c_data & 0x1) { + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); + puts("SD/MMC : 8-bit Mode\n"); + puts("eSPI : Disabled\n"); + } else { + puts("SD/MMC : 4-bit Mode\n"); + puts("eSPI : Enabled\n"); + } + } else { + puts("Failed reading I2C Chip 0x18 on bus 1\n"); + } + i2c_set_bus_num(orig_bus); /* * Remap Boot flash region to caching-inhibited @@ -229,12 +242,3 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); } #endif - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c index a46b1b5670a..1847935a737 100644 --- a/board/freescale/p1_p2_rdb/tlb.c +++ b/board/freescale/p1_p2_rdb/tlb.c @@ -25,19 +25,20 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -80,15 +81,10 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_1M, 1), -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_256K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_256K, 1), +#if defined(CONFIG_SYS_RAMBOOT) + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 7, BOOKE_PAGESZ_1G, 1) #endif }; diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c index 9a1b07554fe..9bf7d2f587a 100644 --- a/board/freescale/p2020ds/ddr.c +++ b/board/freescale/p2020ds/ddr.c @@ -7,34 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(generic_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) - i2c_address = SPD_EEPROM_ADDRESS1; - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - typedef struct { u32 datarate_mhz_low; u32 datarate_mhz_high; diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index 8546aa903f0..238b4d925c1 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -36,7 +36,6 @@ #include <fdt_support.h> #include <tsec.h> #include <asm/fsl_law.h> -#include <asm/mp.h> #include <netdev.h> #include "../common/ngpixis.h" @@ -44,6 +43,19 @@ DECLARE_GLOBAL_DATA_PTR; +int board_early_init_f(void) +{ +#ifdef CONFIG_MMC + ccsr_gur_t *gur = (ccsr_gur_t *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->pmuxcr, + (MPC85xx_PMUXCR_SDHC_CD | + MPC85xx_PMUXCR_SDHC_WP)); +#endif + + return 0; +} + int checkboard(void) { u8 sw; @@ -249,10 +261,3 @@ void ft_board_setup(void *blob, bd_t *bd) #endif } #endif - -#ifdef CONFIG_MP -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/freescale/p2020ds/tlb.c b/board/freescale/p2020ds/tlb.c index 824b3b29f08..fd914a16a8c 100644 --- a/board/freescale/p2020ds/tlb.c +++ b/board/freescale/p2020ds/tlb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -90,6 +90,17 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 8, BOOKE_PAGESZ_4K, 1), + +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 9, BOOKE_PAGESZ_256K, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, + CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_256K, 1), +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/sbc8548/ddr.c b/board/sbc8548/ddr.c index ab64fa88f26..996ffe206da 100644 --- a/board/sbc8548/ddr.c +++ b/board/sbc8548/ddr.c @@ -7,37 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/sbc8560/ddr.c b/board/sbc8560/ddr.c index 7850794d64f..e9babc6477e 100644 --- a/board/sbc8560/ddr.c +++ b/board/sbc8560/ddr.c @@ -7,40 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/sbc8641d/ddr.c b/board/sbc8641d/ddr.c index 23497f98258..996ffe206da 100644 --- a/board/sbc8641d/ddr.c +++ b/board/sbc8641d/ddr.c @@ -7,45 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_bus_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; - } - if (ctrl_num == 0 && i == 1) { - i2c_address = SPD_EEPROM_ADDRESS2; - } - if (ctrl_num == 1 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS3; - } - if (ctrl_num == 1 && i == 1) { - i2c_address = SPD_EEPROM_ADDRESS4; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index 5c30b2676e4..dd585412b4b 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -273,12 +273,3 @@ void board_reset(void) __asm__ __volatile__ ("rfi"); #endif } - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/socrates/ddr.c b/board/socrates/ddr.c index 2b62b847054..e9db476f483 100644 --- a/board/socrates/ddr.c +++ b/board/socrates/ddr.c @@ -7,37 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/stx/stxgp3/ddr.c b/board/stx/stxgp3/ddr.c index 93d1100717f..571137443eb 100644 --- a/board/stx/stxgp3/ddr.c +++ b/board/stx/stxgp3/ddr.c @@ -7,40 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/stx/stxssa/ddr.c b/board/stx/stxssa/ddr.c index 93d1100717f..56c87b2fc6b 100644 --- a/board/stx/stxssa/ddr.c +++ b/board/stx/stxssa/ddr.c @@ -12,35 +12,6 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c index 1d57d0909a6..3a6e297f457 100644 --- a/board/xes/xpedite517x/ddr.c +++ b/board/xes/xpedite517x/ddr.c @@ -26,40 +26,12 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) { i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); } -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_bus_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; -#ifdef SPD_EEPROM_ADDRESS2 - } else if (ctrl_num == 1) { - i2c_address = SPD_EEPROM_ADDRESS2; -#endif - } else { - /* An inalid ctrl number was give, use default SPD */ - printf("ERROR: invalid DDR ctrl: %d\n", ctrl_num); - i2c_address = SPD_EEPROM_ADDRESS1; - } - - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - /* * There are four board-specific SDRAM timing parameters which must be * calculated based on the particular PCB artwork. These are: @@ -144,7 +116,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, unsigned int datarate; get_sys_info(&sysinfo); - datarate = fsl_ddr_get_mem_data_rate() / 1000000; + datarate = get_ddr_freq(0) / 1000000; for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) { if ((bopts[i].datarate_mhz_low <= datarate) && diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c index 61443aab841..179b2380603 100644 --- a/board/xes/xpedite517x/xpedite517x.c +++ b/board/xes/xpedite517x/xpedite517x.c @@ -93,12 +93,3 @@ void ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); } #endif - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/xes/xpedite520x/ddr.c b/board/xes/xpedite520x/ddr.c index c5616d546b8..3671cb8af9a 100644 --- a/board/xes/xpedite520x/ddr.c +++ b/board/xes/xpedite520x/ddr.c @@ -12,8 +12,7 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) { i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); @@ -27,25 +26,6 @@ get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) } } -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s: invalid ctrl_num = %d\n", __func__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c index 4d3f255d705..d0662b0c57d 100644 --- a/board/xes/xpedite537x/ddr.c +++ b/board/xes/xpedite537x/ddr.c @@ -27,32 +27,12 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) { i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); } -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0) - i2c_address = SPD_EEPROM_ADDRESS1; - if (ctrl_num == 1) - i2c_address = SPD_EEPROM_ADDRESS2; - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - /* * There are four board-specific SDRAM timing parameters which must be * calculated based on the particular PCB artwork. These are: diff --git a/board/xes/xpedite537x/xpedite537x.c b/board/xes/xpedite537x/xpedite537x.c index d074495f966..9d9afaefbcc 100644 --- a/board/xes/xpedite537x/xpedite537x.c +++ b/board/xes/xpedite537x/xpedite537x.c @@ -96,12 +96,3 @@ void ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); } #endif - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c index 38a459715fd..3b6e08bfcdd 100644 --- a/board/xes/xpedite550x/ddr.c +++ b/board/xes/xpedite550x/ddr.c @@ -27,30 +27,12 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address) +void get_spd(ddr3_spd_eeprom_t *spd, u8 i2c_address) { i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); } -void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) - i2c_address = SPD_EEPROM_ADDRESS1; - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - /* * There are traditionally three board-specific SDRAM timing parameters * which must be calculated based on the particular PCB artwork. These are: diff --git a/board/xes/xpedite550x/xpedite550x.c b/board/xes/xpedite550x/xpedite550x.c index 6f91c83b6c2..24b2b0ea062 100644 --- a/board/xes/xpedite550x/xpedite550x.c +++ b/board/xes/xpedite550x/xpedite550x.c @@ -96,12 +96,3 @@ void ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); } #endif - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/boards.cfg b/boards.cfg index 9a8dbb3b392..d25f3f23927 100644 --- a/boards.cfg +++ b/boards.cfg @@ -508,22 +508,36 @@ MPC8572DS powerpc mpc85xx mpc8572ds freesca MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT MPC8572DS_NAND powerpc mpc85xx mpc8572ds freescale - MPC8572DS:NAND P1011RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB +P1011RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT +P1011RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT,SDCARD +P1011RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT,SPIFLASH P1011RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,NAND P1011RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,SDCARD P1011RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,SPIFLASH P1020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB +P1020RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT +P1020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SDCARD +P1020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SPIFLASH P1020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,NAND P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SPIFLASH P1022DS powerpc mpc85xx p1022ds freescale +P1022DS_36BIT powerpc mpc85xx p1022ds freescale - P1022DS:36BIT P2010RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB +P2010RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT +P2010RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT,SDCARD +P2010RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT,SPIFLASH P2010RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,NAND P2010RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,SDCARD P2010RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,SPIFLASH P2020DS powerpc mpc85xx p2020ds freescale P2020DS_36BIT powerpc mpc85xx p2020ds freescale - P2020DS:36BIT P2020DS_DDR2 powerpc mpc85xx p2020ds freescale - P2020DS:DDR2 +P2020DS_SDCARD powerpc mpc85xx p2020ds freescale - P2020DS:SDCARD P2020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB +P2020RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT +P2020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT,SDCARD +P2020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT,SPIFLASH P2020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,NAND P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SDCARD P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SPIFLASH diff --git a/common/ddr_spd.c b/common/ddr_spd.c index a7a30de22bb..7a388bb9fa1 100644 --- a/common/ddr_spd.c +++ b/common/ddr_spd.c @@ -18,7 +18,7 @@ spd_check(const u8 *buf, u8 spd_rev, u8 spd_cksum) /* * Check SPD revision supported - * Rev 1.2 or less supported by this code + * Rev 1.X or less supported by this code */ if (spd_rev >= 0x20) { printf("SPD revision %02X not supported by this code\n", diff --git a/common/env_mmc.c b/common/env_mmc.c index 71dcc4c3e25..83f40f43417 100644 --- a/common/env_mmc.c +++ b/common/env_mmc.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * (C) Copyright 2008-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -51,6 +51,19 @@ static void use_default(void); DECLARE_GLOBAL_DATA_PTR; +#if !defined(CONFIG_ENV_OFFSET) +#define CONFIG_ENV_OFFSET 0 +#endif + +static int __mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) +{ + *env_addr = CONFIG_ENV_OFFSET; + return 0; +} +__attribute__((weak, alias("__mmc_get_env_addr"))) +int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr); + + uchar env_get_char_spec(int index) { return *((uchar *)(gd->env_addr + index)); @@ -102,10 +115,14 @@ int saveenv(void) ssize_t len; char *res; struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); + u32 offset; if (init_mmc_for_env(mmc)) return 1; + if(mmc_get_env_addr(mmc, &offset)) + return 1; + res = (char *)&env_new.data; len = hexport_r(&env_htab, '\0', &res, ENV_SIZE); if (len < 0) { @@ -114,7 +131,7 @@ int saveenv(void) } env_new.crc = crc32(0, env_new.data, ENV_SIZE); printf("Writing to MMC(%d)... ", CONFIG_SYS_MMC_ENV_DEV); - if (write_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, (u_char *)&env_new)) { + if (write_env(mmc, CONFIG_ENV_SIZE, offset, (u_char *)&env_new)) { puts("failed\n"); return 1; } @@ -141,16 +158,22 @@ inline int read_env(struct mmc *mmc, unsigned long size, void env_relocate_spec(void) { #if !defined(ENV_IS_EMBEDDED) - char buf[CONFIG_ENV_SIZE]; + char buf[CONFIG_ENV_SIZE]; struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); + u32 offset; if (init_mmc_for_env(mmc)) { use_default(); return; } - if (read_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, buf)) { + if(mmc_get_env_addr(mmc, &offset)) { + use_default(); + return ; + } + + if (read_env(mmc, CONFIG_ENV_SIZE, offset, buf)) { use_default(); return; } diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c index 031c9748f4d..3233ff2e49a 100644 --- a/drivers/misc/fsl_law.c +++ b/drivers/misc/fsl_law.c @@ -24,6 +24,7 @@ */ #include <common.h> +#include <linux/compiler.h> #include <asm/fsl_law.h> #include <asm/io.h> @@ -246,6 +247,25 @@ void init_laws(void) #error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes #endif + /* + * Any LAWs that were set up before we booted assume they are meant to + * be around and mark them used. + */ + for (i = 0; i < FSL_HW_NUM_LAWS; i++) { + u32 lawar = in_be32(LAWAR_ADDR(i)); + + if (lawar & LAW_EN) + gd->used_laws |= (1 << i); + } + +#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) + /* + * in NAND boot we've already parsed the law_table and setup those LAWs + * so don't do it again. + */ + return; +#endif + for (i = 0; i < num_law_entries; i++) { if (law_table[i].index == -1) set_next_law(law_table[i].addr, law_table[i].size, diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 9c8fe624419..9a91b9e0b85 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -1810,6 +1810,28 @@ static struct phy_info phy_info_rtl8211b = { }, }; +struct phy_info phy_info_AR8021 = { + 0x4dd04, + "AR8021", + 4, + (struct phy_cmd[]) { /* config */ + {MII_BMCR, BMCR_RESET, NULL}, + {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL}, + {0x1d, 0x05, NULL}, + {0x1e, 0x3D47, NULL}, + {miim_end,} + }, + (struct phy_cmd[]) { /* startup */ + {MII_BMSR, miim_read, NULL}, + {MII_BMSR, miim_read, &mii_parse_sr}, + {MII_BMSR, miim_read, &mii_parse_link}, + {miim_end,} + }, + (struct phy_cmd[]) { /* shutdown */ + {miim_end,} + } +}; + static struct phy_info *phy_info[] = { &phy_info_cis8204, &phy_info_cis8201, @@ -1832,6 +1854,7 @@ static struct phy_info *phy_info[] = { &phy_info_VSC8221, &phy_info_dp83865, &phy_info_rtl8211b, + &phy_info_AR8021, &phy_info_generic, /* must be last; has ID 0 and 32 bit mask */ NULL }; diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index dc34bd66693..ab461b45ac1 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -223,6 +223,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) u32 cfg_data = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_data; u16 temp16; u32 temp32; + u32 block_rev; int enabled, r, inbound = 0; u16 ltssm; u8 temp8, pcie_cap; @@ -232,13 +233,20 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) /* Initialize ATMU registers based on hose regions and flags */ volatile pot_t *po = &pci->pot[1]; /* skip 0 */ - volatile pit_t *pi = &pci->pit[2]; /* ranges from: 3 to 1 */ + volatile pit_t *pi; u64 out_hi = 0, out_lo = -1ULL; u32 pcicsrbar, pcicsrbar_sz; pci_setup_indirect(hose, cfg_addr, cfg_data); + block_rev = in_be32(&pci->block_rev1); + if (PEX_IP_BLK_REV_2_2 <= block_rev) { + pi = &pci->pit[2]; /* 0xDC0 */ + } else { + pi = &pci->pit[3]; /* 0xDE0 */ + } + /* Handle setup of outbound windows first */ for (r = 0; r < hose->region_count; r++) { unsigned long flags = hose->regions[r].flags; diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 2b68f7bd19e..4abe5e3b59a 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -29,6 +29,7 @@ static struct pci_device_id ehci_pci_ids[] = { /* Please add supported PCI EHCI controller ids here */ {0x1033, 0x00E0}, /* NEC */ + {0x10B9, 0x5239}, /* ULI1575 PCI EHCI module ids */ {0x12D8, 0x400F}, /* Pericom */ {0, 0} }; diff --git a/include/common.h b/include/common.h index 893af5cc10e..54503ed3eba 100644 --- a/include/common.h +++ b/include/common.h @@ -538,6 +538,10 @@ ulong get_ddr_freq (ulong); #if defined(CONFIG_MPC86xx) typedef MPC86xx_SYS_INFO sys_info_t; void get_sys_info ( sys_info_t * ); +static inline ulong get_ddr_freq(ulong dummy) +{ + return get_bus_freq(dummy); +} #endif #if defined(CONFIG_4xx) || defined(CONFIG_IOP480) diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 13300de3eac..333a1ea6ce3 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -40,6 +40,7 @@ #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ #else +#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds #define CONFIG_SYS_TEXT_BASE 0xf8f82000 #endif /* CONFIG_NAND_SPL */ #endif diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 9e24e129072..5f804254fd0 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -72,6 +72,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ #else +#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds #define CONFIG_SYS_TEXT_BASE 0xf8f82000 #endif #endif @@ -138,8 +139,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) /* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ -#define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */ +#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ /* These are used when DDR doesn't use SPD. */ #define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index bf2fdd66820..8c0d06ab86c 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -40,6 +40,7 @@ #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ #else +#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds #define CONFIG_SYS_TEXT_BASE 0xf8f82000 #endif /* CONFIG_NAND_SPL */ #endif @@ -671,6 +672,20 @@ #define CONFIG_CMD_EXT2 #endif +/* + * USB + */ +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI_PCI +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_STORAGE +#define CONFIG_PCI_EHCI_DEVICE 0 +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 +#endif + #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -740,7 +755,7 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ - "memctl_intlv_ctl=2\0" \ + "hwconfig=fsl_ddr:ctlr_intlv=bank,ecc=off\0" \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 03ee394b398..efe03132f79 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -21,14 +21,14 @@ #define CONFIG_SYS_TEXT_BASE 0xfff00000 -#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ /* video */ -#undef CONFIG_VIDEO - -#ifdef CONFIG_VIDEO +#ifdef CONFIG_FSL_DIU_FB +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x2c000) +#define CONFIG_VIDEO #define CONFIG_CMD_BMP #define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO @@ -88,8 +88,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR+0x2c000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE @@ -108,7 +106,7 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) -#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ +#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ /* These are used when DDR doesn't use SPD. */ #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ @@ -494,9 +492,6 @@ #define CONFIG_WATCHDOG /* watchdog enabled */ #define CONFIG_SYS_WATCHDOG_FREQ 5000 /* Feed interval, 5s */ -/*DIU Configuration*/ -#define DIU_CONNECT_TO_DVI /* DIU controller connects to DVI encoder*/ - /* * Miscellaneous configurable options */ diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 84b7e1d22eb..e78bcc54c58 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -14,6 +14,10 @@ #include "../board/freescale/common/ics307_clk.h" +#ifdef CONFIG_36BIT +#define CONFIG_PHYS_64BIT +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ @@ -39,10 +43,11 @@ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_PHYS_64BIT +#ifdef CONFIG_PHYS_64BIT #define CONFIG_ENABLE_36BIT_PHYS #define CONFIG_ADDR_MAP #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ +#endif #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -65,7 +70,11 @@ */ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull +#else +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR +#endif #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* DDR Setup */ @@ -87,7 +96,7 @@ /* I2C addresses of SPD EEPROMs */ #define CONFIG_SYS_SPD_BUS_NUM 1 -#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ +#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ /* * Memory map @@ -111,7 +120,11 @@ * Local Bus Definitions */ #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull +#else +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#endif #define CONFIG_FLASH_BR_PRELIM \ (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V) @@ -145,7 +158,11 @@ #define CONFIG_FSL_NGPIXIS #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ +#ifdef CONFIG_PHYS_64BIT #define PIXIS_BASE_PHYS 0xfffdf0000ull +#else +#define PIXIS_BASE_PHYS PIXIS_BASE +#endif #define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) #define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | 0x6ff7) @@ -185,13 +202,12 @@ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* Video */ -#undef CONFIG_FSL_DIU_FB - #ifdef CONFIG_FSL_DIU_FB #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) #define CONFIG_VIDEO #define CONFIG_CMD_BMP #define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO @@ -241,32 +257,59 @@ /* controller 1, Slot 2, tgtid 1, Base address a000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 +#endif #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull +#else +#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 +#endif #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 2, direct to uli, tgtid 2, Base address 9000 */ #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull +#else +#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 +#endif #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 3, Slot 1, tgtid 3, Base address b000 */ #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull +#else +#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 +#endif #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull +#else +#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 +#endif #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ #ifdef CONFIG_PCI diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 95b85e3f657..4103e8b96bf 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -30,6 +30,10 @@ #ifndef __CONFIG_H #define __CONFIG_H +#ifdef CONFIG_36BIT +#define CONFIG_PHYS_64BIT +#endif + #ifdef CONFIG_P1011RDB #define CONFIG_P1011 #endif @@ -50,20 +54,21 @@ #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ #else +#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds #define CONFIG_SYS_TEXT_BASE 0xf8f82000 #endif /* CONFIG_NAND_SPL */ #endif #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD 1 -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc #endif #ifdef CONFIG_SPIFLASH #define CONFIG_RAMBOOT_SPIFLASH 1 -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc #endif #ifndef CONFIG_SYS_TEXT_BASE @@ -122,6 +127,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ENABLE_36BIT_PHYS 1 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP 1 +#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ +#endif + #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff #define CONFIG_PANIC_HANG /* do not reset board on panic */ @@ -143,7 +153,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * actual resources get mapped (not physical addresses) */ #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull +#else +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR +#endif /* CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */ /* CONFIG_SYS_IMMR */ @@ -196,13 +210,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ #define CONFIG_SYS_FLASH_BASE 0xef000000 /* start of FLASH 16M */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_FLASH_BASE_PHYS 0xfef000000ull +#else #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#endif #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ BR_PS_16 | BR_V) #define CONFIG_FLASH_OR_PRELIM 0xff000ff7 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ @@ -230,6 +248,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#else +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#endif #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ @@ -241,10 +271,20 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #ifndef CONFIG_NAND_SPL #define CONFIG_SYS_NAND_BASE 0xffa00000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull #else -#define CONFIG_SYS_NAND_BASE 0xfff00000 +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #endif +#else +#define CONFIG_SYS_NAND_BASE 0xfff00000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull +#else #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE +#endif +#endif + #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 @@ -263,7 +303,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) /* NAND flash config */ -#define CONFIG_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ +#define CONFIG_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ @@ -291,9 +331,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_VSC7385_BASE 0xffb00000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull +#else #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE +#endif -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE | BR_PS_8 | BR_V) +#define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE) \ + | BR_PS_8 | BR_V) #define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \ OR_GPCM_EHTR | OR_GPCM_EAD) @@ -360,6 +405,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_BUS_NUM 1 +#define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 + #define CONFIG_RTC_DS1337 #define CONFIG_SYS_RTC_DS1337_NOOSC #define CONFIG_SYS_I2C_RTC_ADDR 0x68 @@ -372,23 +419,41 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* controller 2, Slot 2, tgtid 2, Base address 9000 */ #define CONFIG_SYS_PCIE2_NAME "Slot 1" #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull +#else #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 +#endif #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 1, tgtid 1, Base address a000 */ #define CONFIG_SYS_PCIE1_NAME "Slot 2" #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#else #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#endif #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull +#else #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 +#endif #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index b32a9976f61..30da7b1d45e 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -33,6 +33,13 @@ #define CONFIG_PHYS_64BIT #endif +#ifdef CONFIG_SDCARD +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ @@ -78,6 +85,8 @@ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ + #define CONFIG_ENABLE_36BIT_PHYS 1 #ifdef CONFIG_PHYS_64BIT @@ -91,6 +100,18 @@ #define CONFIG_PANIC_HANG /* do not reset board on panic */ /* + * Config the L2 Cache + */ +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull +#else +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#endif +#define CONFIG_SYS_L2_SIZE (512 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) + +/* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ @@ -128,7 +149,7 @@ /* I2C addresses of SPD EEPROMs */ #define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD EEPROM located on I2C bus 0 */ -#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ +#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ /* These are used when DDR doesn't use SPD. */ #define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1GB */ @@ -569,6 +590,11 @@ /* * Environment */ +#if defined(CONFIG_SDCARD) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else #define CONFIG_ENV_IS_IN_FLASH 1 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 #define CONFIG_ENV_ADDR 0xfff80000 @@ -577,6 +603,7 @@ #endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ @@ -605,15 +632,36 @@ /* * USB */ +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#endif #undef CONFIG_WATCHDOG /* watchdog disabled */ /* + * SDHC/MMC + */ +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#endif + +#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -651,13 +699,8 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD -#define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD #endif #define CONFIG_IPADDR 192.168.1.254 @@ -680,8 +723,8 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ - "perf_mode=stable\0" \ - "memctl_intlv_ctl=2\0" \ + "perf_mode=performance\0" \ + "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1\0" \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ @@ -690,18 +733,25 @@ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ + "satabootcmd=setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=p2020ds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ + "othbootargs=cache-sram-size=0x10000\0" \ "fdtfile=p2020ds/p2020ds.dtb\0" \ - "bdev=sda3\0" + "bdev=sda3\0" \ + "partition=scsi 0:0\0" #define CONFIG_HDBOOT \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ + "ext2load $partition $loadaddr $bootfile;" \ + "ext2load $partition $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" #define CONFIG_NFSBOOTCOMMAND \ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index bff212e40d7..7bafa05b199 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -357,6 +357,7 @@ #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ /* Qman/Bman */ +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ #define CONFIG_SYS_BMAN_NUM_PORTALS 10 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 #ifdef CONFIG_PHYS_64BIT diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index f966325a8e2..e7ef29809a9 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -46,16 +46,16 @@ */ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC512X 1 /* MPC512X family */ -#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* video */ -#undef CONFIG_VIDEO - -#ifdef CONFIG_VIDEO +#ifdef CONFIG_FSL_DIU_FB +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR + 0x2100) +#define CONFIG_VIDEO #define CONFIG_CMD_BMP #define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO @@ -74,7 +74,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100) #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ #define CONFIG_SYS_MEMTEST_END 0x00400000 diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index a051913ffb2..17aab5a7bbf 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -67,7 +67,7 @@ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD #define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#define SPD_EEPROM_ADDRESS1 0x54 +#define SPD_EEPROM_ADDRESS 0x54 #define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 diff --git a/include/ddr_spd.h b/include/ddr_spd.h index 710e5289c73..e895d615a8d 100644 --- a/include/ddr_spd.h +++ b/include/ddr_spd.h @@ -304,14 +304,24 @@ extern unsigned int ddr3_spd_check(const ddr3_spd_eeprom_t *spd); #define SPD_MEMTYPE_DDR2_FBDIMM_PROBE (0x0A) #define SPD_MEMTYPE_DDR3 (0x0B) -/* - * Byte 3 Key Byte / Module Type for DDR3 SPD - */ -#define SPD_MODULETYPE_RDIMM (0x01) -#define SPD_MODULETYPE_UDIMM (0x02) -#define SPD_MODULETYPE_SODIMM (0x03) -#define SPD_MODULETYPE_MICRODIMM (0x04) -#define SPD_MODULETYPE_MINIRDIMM (0x05) -#define SPD_MODULETYPE_MINIUDIMM (0x06) +/* DIMM Type for DDR2 SPD (according to v1.3) */ +#define DDR2_SPD_DIMMTYPE_UNDEFINED (0x00) +#define DDR2_SPD_DIMMTYPE_RDIMM (0x01) +#define DDR2_SPD_DIMMTYPE_UDIMM (0x02) +#define DDR2_SPD_DIMMTYPE_SO_DIMM (0x04) +#define DDR2_SPD_DIMMTYPE_72B_SO_CDIMM (0x06) +#define DDR2_SPD_DIMMTYPE_72B_SO_RDIMM (0x07) +#define DDR2_SPD_DIMMTYPE_MICRO_DIMM (0x08) +#define DDR2_SPD_DIMMTYPE_MINI_RDIMM (0x10) +#define DDR2_SPD_DIMMTYPE_MINI_UDIMM (0x20) + +/* Byte 3 Key Byte / Module Type for DDR3 SPD */ +#define DDR3_SPD_MODULETYPE_MASK (0x0f) +#define DDR3_SPD_MODULETYPE_RDIMM (0x01) +#define DDR3_SPD_MODULETYPE_UDIMM (0x02) +#define DDR3_SPD_MODULETYPE_SO_DIMM (0x03) +#define DDR3_SPD_MODULETYPE_MICRO_DIMM (0x04) +#define DDR3_SPD_MODULETYPE_MINI_RDIMM (0x05) +#define DDR3_SPD_MODULETYPE_MINI_UDIMM (0x06) #endif /* _DDR_SPD_H_ */ |