summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG18
-rw-r--r--board/csb226/csb226.c2
-rw-r--r--board/emk/top860/config.mk4
-rw-r--r--board/innokom/innokom.c4
-rw-r--r--board/lubbock/flash.c339
-rw-r--r--board/mpl/common/common_util.c2
-rw-r--r--board/mpl/vcma9/cmd_vcma9.c2
-rw-r--r--board/mpl/vcma9/vcma9.c1
-rw-r--r--board/trab/vfd.c172
-rw-r--r--common/cmd_pci.c79
-rw-r--r--cpu/arm920t/interrupts.c8
-rw-r--r--cpu/arm920t/start.S3
-rw-r--r--doc/README.JFFS28
-rw-r--r--drivers/cs8900.c4
-rw-r--r--drivers/cs8900.h2
-rw-r--r--drivers/s3c24x0_i2c.c2
-rw-r--r--fs/jffs2/jffs2_1pass.c636
-rw-r--r--fs/jffs2/jffs2_private.h33
-rw-r--r--include/asm-arm/global_data.h1
-rw-r--r--include/asm-arm/io.h65
-rw-r--r--include/configs/innokom.h68
-rw-r--r--include/i2c.h3
22 files changed, 842 insertions, 614 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 1b36b41a402..18613a82a5b 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,24 @@
Changes since U-Boot 0.2.2:
======================================================================
+* Avoid flicker on the TRAB's VFD by synchronizing the enable with
+ the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
+ boards, version 153 for Rev. 200 boards).
+
+* Patch by Vladimir Gurevich, 12 Mar 2003:
+ Fix relocation problem of statically initialized string pointers
+ in common/cmd_pci.c
+
+* Patch by Kai-Uwe Blöm, 12 Mar 2003:
+ Cleanup & bug fixes for JFFS2 code:
+ - the memory mangement was broken. It caused havoc on malloc by
+ writing beyond the block boundaries.
+ - the length calculation for files was wrong, sometimes resulting
+ in short file reads.
+ - data copying now optionally takes fragment version numbers into
+ account, to avoid copying from older data.
+ See doc/README.JFFS2 for details.
+
* Patch by Josef Wagner, 12 Mar 2003:
- 16/32 MB and 50/80 MHz support with auto-detection for IP860
- ETH05 and BEDBUG support for CU824
diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
index 11cab005c66..a79d168e044 100644
--- a/board/csb226/csb226.c
+++ b/board/csb226/csb226.c
@@ -38,10 +38,10 @@
int misc_init_r(void)
{
+#if 0
uchar *str;
/* determine if the software update key is pressed during startup */
-#if 0
/* not ported yet... */
if (GPLR0 & 0x00000800) {
printf("using bootcmd_normal (sw-update button not pressed)\n");
diff --git a/board/emk/top860/config.mk b/board/emk/top860/config.mk
index 95917a18b6c..7b940cb8138 100644
--- a/board/emk/top860/config.mk
+++ b/board/emk/top860/config.mk
@@ -21,4 +21,8 @@
# MA 02111-1307 USA
#
+#
+# TOP860 board
+#
+
TEXT_BASE = 0x80000000
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index 17f6353d2ef..0176d9c2c33 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -39,7 +39,7 @@
* The Innokom board has GPIO70 connected to SCLK which can be toggled
* until all chips think that their current cycles are finished.
*/
-int i2c_init_board(void)
+void i2c_init_board(void)
{
int i;
@@ -53,8 +53,6 @@ int i2c_init_board(void)
}
/* set gpio pin to input */
GPDR(70) &= ~GPIO_bit(70);
-
- return 0;
}
diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c
index a93875083b6..dcf829b2c55 100644
--- a/board/lubbock/flash.c
+++ b/board/lubbock/flash.c
@@ -28,7 +28,7 @@
#include <linux/byteorder/swab.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* Board support for 1 or 2 flash devices */
#define FLASH_PORT_WIDTH32
@@ -53,50 +53,47 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
* Functions
*/
static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-void inline spin_wheel(void);
+static int write_data (flash_info_t *info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+void inline spin_wheel (void);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
- int i;
- ulong size = 0;
-
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
- {
- switch (i)
- {
- case 0:
- flash_get_size((FPW *)PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
- break;
- case 1:
- flash_get_size((FPW *)PHYS_FLASH_2, &flash_info[i]);
- flash_get_offsets(PHYS_FLASH_2, &flash_info[i]);
- break;
- default:
- panic("configured to many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect(FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
- &flash_info[0]);
-
- return size;
+ int i;
+ ulong size = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ switch (i) {
+ case 0:
+ flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+ flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+ break;
+ case 1:
+ flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
+ flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
+ break;
+ default:
+ panic ("configured to many flash banks!\n");
+ break;
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+ &flash_info[0] );
+
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+
+ return size;
}
/*-----------------------------------------------------------------------
@@ -119,39 +116,45 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
/*-----------------------------------------------------------------------
*/
-void flash_print_info (flash_info_t *info)
+void flash_print_info (flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
- }
+ }
switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
+ case FLASH_MAN_INTEL:
+ printf ("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F128J3A:
- printf ("28F128J3A\n"); break;
- default: printf ("Unknown Chip Type\n"); break;
- }
+ case FLASH_28F128J3A:
+ printf ("28F128J3A\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
+ info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
printf (" %08lX%s",
info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
return;
}
@@ -163,37 +166,37 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
volatile FPW value;
/* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW)0x00AA00AA;
- addr[0x2AAA] = (FPW)0x00550055;
- addr[0x5555] = (FPW)0x00900090;
+ addr[0x5555] = (FPW) 0x00AA00AA;
+ addr[0x2AAA] = (FPW) 0x00550055;
+ addr[0x5555] = (FPW) 0x00900090;
- mb();
+ mb ();
value = addr[0];
- switch (value) {
+ switch (value) {
- case (FPW)INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
+ case (FPW) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
- addr[0] = (FPW)0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
}
- mb();
- value = addr[1]; /* device ID */
+ mb ();
+ value = addr[1]; /* device ID */
- switch (value) {
+ switch (value) {
- case (FPW)INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x02000000;
- break; /* => 16 MB */
+ case (FPW) INTEL_ID_28F128J3A:
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x02000000;
+ break; /* => 16 MB */
default:
info->flash_id = FLASH_UNKNOWN;
@@ -204,9 +207,9 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
printf ("** ERROR: sector count %d > max (%d) **\n",
info->sector_count, CFG_MAX_FLASH_SECT);
info->sector_count = CFG_MAX_FLASH_SECT;
- }
+ }
- addr[0] = (FPW)0x00FF00FF; /* restore read mode */
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
return (info->size);
}
@@ -215,34 +218,34 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
/*-----------------------------------------------------------------------
*/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t *info, int s_first, int s_last)
{
- int flag, prot, sect;
- ulong type, start, now, last;
+ int flag, prot, sect;
+ ulong type, start, last;
int rcode = 0;
- if ((s_first < 0) || (s_first > s_last)) {
+ if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
- }
+ }
type = (info->flash_id & FLASH_VENDMASK);
if ((type != FLASH_MAN_INTEL)) {
printf ("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return 1;
- }
+ }
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
}
- }
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
@@ -252,42 +255,42 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
}
start = get_timer (0);
- last = start;
+ last = start;
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *)(info->start[sect]);
+ FPWV *addr = (FPWV *) (info->start[sect]);
FPW status;
- printf("Erasing sector %2d ... ", sect);
+ printf ("Erasing sector %2d ... ", sect);
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
- *addr = (FPW)0x00500050; /* clear status register */
- *addr = (FPW)0x00200020; /* erase setup */
- *addr = (FPW)0x00D000D0; /* erase confirm */
+ *addr = (FPW) 0x00500050; /* clear status register */
+ *addr = (FPW) 0x00200020; /* erase setup */
+ *addr = (FPW) 0x00D000D0; /* erase confirm */
- while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
- if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
- *addr = (FPW)0x00B000B0; /* suspend erase */
- *addr = (FPW)0x00FF00FF; /* reset to read mode */
+ *addr = (FPW) 0x00B000B0; /* suspend erase */
+ *addr = (FPW) 0x00FF00FF; /* reset to read mode */
rcode = 1;
break;
- }
- }
+ }
+ }
- *addr = 0x00500050; /* clear status register cmd. */
- *addr = 0x00FF00FF; /* resest to read mode */
+ *addr = 0x00500050; /* clear status register cmd. */
+ *addr = 0x00FF00FF; /* resest to read mode */
printf (" done\n");
- }
- }
+ }
+ }
return rcode;
}
@@ -301,7 +304,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
- ulong cp, wp;
+ ulong cp, wp;
FPW data;
int count, i, l, rc, port_width;
@@ -317,67 +320,66 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
port_width = 4;
#endif
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<port_width && cnt>0; ++i) {
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < port_width && cnt > 0; ++i) {
data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
- if ((rc = write_data(info, wp, SWAP(data))) != 0) {
- return (rc);
- }
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
wp += port_width;
- }
+ }
- /*
- * handle word aligned part
- */
+ /*
+ * handle word aligned part
+ */
count = 0;
while (cnt >= port_width) {
data = 0;
- for (i=0; i<port_width; ++i) {
+ for (i = 0; i < port_width; ++i) {
data = (data << 8) | *src++;
}
- if ((rc = write_data(info, wp, SWAP(data))) != 0) {
- return (rc);
- }
- wp += port_width;
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
cnt -= port_width;
- if (count++ > 0x800)
- {
- spin_wheel();
+ if (count++ > 0x800) {
+ spin_wheel ();
count = 0;
}
- }
+ }
- if (cnt == 0) {
+ if (cnt == 0) {
return (0);
- }
+ }
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) {
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
}
- return (write_data(info, wp, SWAP(data)));
+ return (write_data (info, wp, SWAP (data)));
}
/*-----------------------------------------------------------------------
@@ -388,45 +390,42 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
*/
static int write_data (flash_info_t *info, ulong dest, FPW data)
{
- FPWV *addr = (FPWV *)dest;
+ FPWV *addr = (FPWV *) dest;
ulong status;
- ulong start;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
- printf("not erased at %08lx (%x)\n",(ulong)addr,*addr);
+ printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
return (2);
}
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ flag = disable_interrupts ();
- *addr = (FPW)0x00400040; /* write setup */
+ *addr = (FPW) 0x00400040; /* write setup */
*addr = data;
/* arm simple, non interrupt dependent timer */
- reset_timer_masked();
+ reset_timer_masked ();
/* wait while polling the status register */
- while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
- if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
- *addr = (FPW)0x00FF00FF; /* restore read mode */
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
- }
+ }
- *addr = (FPW)0x00FF00FF; /* restore read mode */
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
return (0);
}
-void inline
-spin_wheel(void)
+void inline spin_wheel (void)
{
- static int r=0,p=0;
- static char w[] = "\\/-";
+ static int p = 0;
+ static char w[] = "\\/-";
- printf("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
+ printf ("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
}
-
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 0a67090feaa..19ead331b87 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -49,7 +49,9 @@ int mpl_prg(unsigned long src,unsigned long size)
unsigned long start;
flash_info_t *info;
int i,rc;
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
unsigned long *magic = (unsigned long *)src;
+#endif
info = &flash_info[0];
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
index cdafc50d654..80bb61b2bee 100644
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ b/board/mpl/vcma9/cmd_vcma9.c
@@ -102,7 +102,7 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf("\nplease defined 'ethaddr'\n");
}
} else if (strcmp(argv[2], "dump") == 0) {
- uchar addr, endaddr, csum; ushort data;
+ uchar addr = 0, endaddr, csum; ushort data;
printf("Dump of CS8900 config device: ");
cs8900_e2prom_read(addr, &data);
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index 8e3552e2b32..e452a7b2827 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -183,7 +183,6 @@ static uchar Get_Board_PCB(void)
int checkboard(void)
{
unsigned char s[50];
- unsigned char bc, var, rc;
int i;
backup_t *b = (backup_t *) s;
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index 894e3157d68..9b61f6eb617 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -59,10 +59,24 @@
#define FRAME_BUF_SIZE ((256*4*56)/8)
#define frame_buf_offs 4
+/* defines for starting Timer3 as CPLD-Clk */
+#define START3 (1 << 16)
+#define UPDATE3 (1 << 17)
+#define INVERT3 (1 << 18)
+#define RELOAD3 (1 << 19)
+
+/* CPLD-Register for controlling vfd-blank-signal */
+#define VFD_DISABLE (*(volatile uchar *)0x04038000=0x0000)
+#define VFD_ENABLE (*(volatile uchar *)0x04038000=0x0001)
+
/* Supported VFD Types */
#define VFD_TYPE_T119C 1 /* Noritake T119C VFD */
#define VFD_TYPE_MN11236 2
+/*#define NEW_CPLD_CLK*/
+
+int vfd_board_id;
+
/* taken from armboot/common/vfd.c */
unsigned long adr_vfd_table[112][18][2][4][2];
unsigned char bit_vfd_table[112][18][2][4][2];
@@ -80,9 +94,7 @@ void init_grid_ctrl(void)
/*
* clear frame buffer (logical clear => set to "black")
*/
- memset ((void *)(gd->fb_base),
- gd->vfd_inv_data ? 0xFF : 0,
- FRAME_BUF_SIZE);
+ memset ((void *)(gd->fb_base), 0, FRAME_BUF_SIZE);
switch (gd->vfd_type) {
case VFD_TYPE_T119C:
@@ -98,10 +110,7 @@ void init_grid_ctrl(void)
bit_nr = bit % 8;
bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4;
temp=(*(volatile unsigned char*)(adr));
- if (gd->vfd_inv_data)
- temp &= ~(1<<bit_nr);
- else
- temp |= (1<<bit_nr);
+ temp |= (1<<bit_nr);
(*(volatile unsigned char*)(adr))=temp;
if(grid_cycle<55)
@@ -115,10 +124,7 @@ void init_grid_ctrl(void)
bit_nr = bit%8;
bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
temp=(*(volatile unsigned char*)(adr));
- if (gd->vfd_inv_data)
- temp &= ~(1<<bit_nr);
- else
- temp |= (1<<bit_nr);
+ temp |= (1<<bit_nr);
(*(volatile unsigned char*)(adr))=temp;
}
}
@@ -136,10 +142,7 @@ void init_grid_ctrl(void)
bit_nr = bit % 8;
bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4;
temp=(*(volatile unsigned char*)(adr));
- if (gd->vfd_inv_data)
- temp &= ~(1<<bit_nr);
- else
- temp |= (1<<bit_nr);
+ temp |= (1<<bit_nr);
(*(volatile unsigned char*)(adr))=temp;
if(grid_cycle<37)
@@ -152,10 +155,7 @@ void init_grid_ctrl(void)
bit_nr = bit%8;
bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
temp=(*(volatile unsigned char*)(adr));
- if (gd->vfd_inv_data)
- temp &= ~(1<<bit_nr);
- else
- temp |= (1<<bit_nr);
+ temp |= (1<<bit_nr);
(*(volatile unsigned char*)(adr))=temp;
}
}
@@ -250,7 +250,7 @@ void create_vfd_table(void)
for(entry=0;entry<2;entry++) {
unsigned long adr = gd->fb_base;
unsigned int bit_nr = 0;
-
+
if (vfd_table[x][y][color][display][entry]) {
pixel = vfd_table[x][y][color][display][entry] + frame_buf_offs;
@@ -295,18 +295,11 @@ void set_vfd_pixel(unsigned char x, unsigned char y,
bit_nr = bit_vfd_table[x][y][color][display][0];
temp=(*(volatile unsigned char*)(adr));
- if (gd->vfd_inv_data) {
- if (value)
- temp &= ~(1<<bit_nr);
- else
- temp |= (1<<bit_nr);
- } else {
- if (value)
- temp |= (1<<bit_nr);
- else
- temp &= ~(1<<bit_nr);
- }
-
+ if (value)
+ temp |= (1<<bit_nr);
+ else
+ temp &= ~(1<<bit_nr);
+
(*(volatile unsigned char*)(adr))=temp;
}
@@ -363,22 +356,59 @@ void transfer_pic(int display, unsigned char *adr, int height, int width)
* This function initializes VFD clock that is needed for the CPLD that
* manages the keyboard.
*/
-int vfd_init_clocks(void)
+int vfd_init_clocks (void)
{
- /* Port-Pins als LCD-Ausgang */
- rPCCON = (rPCCON & 0xFFFFFF00)| 0x000000AA;
- /* Port-Pins als LCD-Ausgang */
- rPDCON = (rPDCON & 0xFFFFFF03)| 0x000000A8;
-#ifdef CFG_WITH_VFRAME
- /* mit VFRAME zum Messen */
- rPDCON = (rPDCON & 0xFFFFFF00)| 0x000000AA;
-#endif
- rLCDCON2 = 0x000DC000;
- rLCDCON3 = 0x0051000A;
- rLCDCON4 = 0x00000001;
- rLCDCON5 = 0x00000440;
+ /* try to determine display type from the value
+ * defined by pull-ups
+ */
+ rPCUP = (rPCUP & 0xFFF0); /* activate GPC0...GPC3 pullups */
+ rPCCON = (rPCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */
+ udelay (10); /* allow signals to settle */
+ vfd_board_id = (~rPCDAT) & 0x000F; /* read GPC0...GPC3 port pins */
+
+ VFD_DISABLE; /* activate blank for the vfd */
+
+#define NEW_CPLD_CLK
+
+#ifdef NEW_CPLD_CLK
+ if (vfd_board_id) {
+ /* If new board revision, then use PWM 3 as cpld-clock */
+ /* Enable 500 Hz timer for fill level sensor to operate properly */
+ /* Configure TOUT3 as functional pin, disable pull-up */
+ rPDCON &= ~0x30000;
+ rPDCON |= 0x20000;
+ rPDUP |= (1 << 8);
+
+ /* Configure the prescaler */
+ rTCFG0 &= ~0xff00;
+ rTCFG0 |= 0x0f00;
+
+ /* Select MUX input (divider) for timer3 (1/16) */
+ rTCFG1 &= ~0xf000;
+ rTCFG1 |= 0x3000;
+
+ /* Enable autoreload and set the counter and compare
+ * registers to values for the 500 Hz clock
+ * (for a given prescaler (15) and divider (16)):
+ * counter = (66000000 / 500) >> 9;
+ */
+ rTCNTB3 = 0x101;
+ rTCMPB3 = 0x101 / 2;
+
+ /* Start timer */
+ rTCON = (rTCON | UPDATE3 | RELOAD3) & ~INVERT3;
+ rTCON = (rTCON | START3) & ~UPDATE3;
+ }
+#endif
+ /* If old board revision, then use vm-signal as cpld-clock */
+ rLCDCON2 = 0x00FFC000;
+ rLCDCON3 = 0x0007FF00;
+ rLCDCON4 = 0x00000000;
+ rLCDCON5 = 0x00000400;
rLCDCON1 = 0x00000B75;
+ /* VM (GPD1) is used as clock for the CPLD */
+ rPDCON = (rPDCON & 0xFFFFFFF3) | 0x00000008;
return 0;
}
@@ -397,7 +427,7 @@ int drv_vfd_init(void)
char *tmp;
ulong palette;
static int vfd_init_done = 0;
- int vfd_id;
+ int vfd_inv_data = 0;
DECLARE_GLOBAL_DATA_PTR;
@@ -405,17 +435,9 @@ int drv_vfd_init(void)
return (0);
vfd_init_done = 1;
- /* try to determine display type from the value
- * defined by pull-ups
- */
- rPCUP = (rPCUP & 0xFFF0); /* activate GPC0...GPC3 pullups */
- rPCCON = (rPCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */
- udelay(10); /* allow signals to settle */
-
- vfd_id = (~rPCDAT) & 0x000F; /* read GPC0...GPC3 port pins */
- debug("Detecting Revison of WA4-VFD: ID=0x%X\n", vfd_id);
+ debug("Detecting Revison of WA4-VFD: ID=0x%X\n", vfd_board_id);
- switch (vfd_id) {
+ switch (vfd_board_id) {
case 0: /* board revision < Rev.200 */
if ((tmp = getenv ("vfd_type")) == NULL) {
break;
@@ -428,19 +450,18 @@ int drv_vfd_init(void)
/* cannot use printf for a warning here */
gd->vfd_type = 0; /* unknown */
}
- gd->vfd_inv_data = 0;
break;
default: /* default to MN11236, data inverted */
gd->vfd_type = VFD_TYPE_MN11236;
- gd->vfd_inv_data = 1;
+ vfd_inv_data = 1;
setenv ("vfd_type", "MN11236");
}
debug ("VFD type: %s%s\n",
(gd->vfd_type == VFD_TYPE_T119C) ? "T119C" :
(gd->vfd_type == VFD_TYPE_MN11236) ? "MN11236" :
"unknown",
- gd->vfd_inv_data ? ", inverted data" : "");
+ vfd_inv_data ? ", inverted data" : "");
gd->fb_base = gd->fb_base;
create_vfd_table();
@@ -458,11 +479,33 @@ int drv_vfd_init(void)
* (wrap around)
* see manual S3C2400
*/
+ /* Stopp LCD-Controller */
+ rLCDCON1 = 0x00000000;
/* frame buffer startadr */
rLCDSADDR1 = gd->fb_base >> 1;
/* frame buffer endadr */
rLCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1;
rLCDSADDR3 = ((256/4));
+ rLCDCON2 = 0x000DC000;
+ rLCDCON3 = 0x0051000A;
+ rLCDCON4 = 0x00000001;
+ if (gd->vfd_type && vfd_inv_data)
+ rLCDCON5 = 0x000004C0;
+ else
+ rLCDCON5 = 0x00000440;
+
+ /* Port pins as LCD output */
+ rPCCON = (rPCCON & 0xFFFFFF00)| 0x000000AA;
+ rPDCON = (rPDCON & 0xFFFFFF03)| 0x000000A8;
+
+ /* Synchronize VFD enable with LCD controller to avoid flicker */
+ rLCDCON1 = 0x00000B75; /* Start LCD-Controller */
+ while((rLCDCON5 & 0x180000)!=0x100000); /* Wait for end of VSYNC */
+ while((rLCDCON5 & 0x060000)!=0x040000); /* Wait for next HSYNC */
+ while((rLCDCON5 & 0x060000)==0x040000);
+ while((rLCDCON5 & 0x060000)!=0x000000);
+ if(gd->vfd_type)
+ VFD_ENABLE;
debug ("LCDSADDR1: %lX\n", rLCDSADDR1);
debug ("LCDSADDR2: %lX\n", rLCDSADDR2);
@@ -471,6 +514,17 @@ int drv_vfd_init(void)
return 0;
}
+/*
+ * Disable VFD: should be run before resetting the system:
+ * disable VM, enable pull-up
+ */
+void disable_vfd (void)
+{
+ VFD_DISABLE;
+ rPDCON &= ~0xC;
+ rPDUP &= ~0x2;
+}
+
/************************************************************************/
/* ** ROM capable initialization part - needed to reserve FB memory */
/************************************************************************/
diff --git a/common/cmd_pci.c b/common/cmd_pci.c
index 5a3b5574ee9..a26deddcd36 100644
--- a/common/cmd_pci.c
+++ b/common/cmd_pci.c
@@ -115,28 +115,65 @@ void pciinfo(int BusNum, int ShortPCIListing)
char* pci_classes_str(u8 class)
{
- static char *pci_classes[] = {
- "Build before PCI Rev2.0",
- "Mass storage controller",
- "Network controller ",
- "Display controller ",
- "Multimedia device ",
- "Memory controller ",
- "Bridge device ",
- "Simple comm. controller",
- "Base system peripheral ",
- "Input device ",
- "Docking station ",
- "Processor ",
- "Serial bus controller ",
- "Reserved entry ",
- "Does not fit any class "
- };
-
- if (class < (sizeof pci_classes / sizeof *pci_classes))
- return pci_classes[(int) class];
-
+ switch (class) {
+ case PCI_CLASS_NOT_DEFINED:
+ return "Build before PCI Rev2.0";
+ break;
+ case PCI_BASE_CLASS_STORAGE:
+ return "Mass storage controller";
+ break;
+ case PCI_BASE_CLASS_NETWORK:
+ return "Network controller ";
+ break;
+ case PCI_BASE_CLASS_DISPLAY:
+ return "Display controller ";
+ break;
+ case PCI_BASE_CLASS_MULTIMEDIA:
+ return "Multimedia device ";
+ break;
+ case PCI_BASE_CLASS_MEMORY:
+ return "Memory controller ";
+ break;
+ case PCI_BASE_CLASS_BRIDGE:
+ return "Bridge device ";
+ break;
+ case PCI_BASE_CLASS_COMMUNICATION:
+ return "Simple comm. controller";
+ break;
+ case PCI_BASE_CLASS_SYSTEM:
+ return "Base system peripheral ";
+ break;
+ case PCI_BASE_CLASS_INPUT:
+ return "Input device ";
+ break;
+ case PCI_BASE_CLASS_DOCKING:
+ return "Docking station ";
+ break;
+ case PCI_BASE_CLASS_PROCESSOR:
+ return "Processor ";
+ break;
+ case PCI_BASE_CLASS_SERIAL:
+ return "Serial bus controller ";
+ break;
+ case PCI_BASE_CLASS_INTELLIGENT:
+ return "Intelligent controller ";
+ break;
+ case PCI_BASE_CLASS_SATELLITE:
+ return "Satellite controller ";
+ break;
+ case PCI_BASE_CLASS_CRYPT:
+ return "Cryptographic device ";
+ break;
+ case PCI_BASE_CLASS_SIGNAL_PROCESSING:
+ return "DSP ";
+ break;
+ case PCI_CLASS_OTHERS:
+ return "Does not fit any class ";
+ break;
+ default:
return "??? ";
+ break;
+ };
}
/*
diff --git a/cpu/arm920t/interrupts.c b/cpu/arm920t/interrupts.c
index 963ccbd2a35..195fb01477a 100644
--- a/cpu/arm920t/interrupts.c
+++ b/cpu/arm920t/interrupts.c
@@ -199,9 +199,9 @@ int interrupt_init (void)
/* load value for 10 ms timeout */
lastdec = rTCNTB4 = timer_load_val;
/* auto load, manual update of Timer 4 */
- rTCON = 0x600000;
+ rTCON = (rTCON & ~0x0700000) | 0x600000;
/* auto load, start Timer 4 */
- rTCON = 0x500000;
+ rTCON = (rTCON & ~0x0700000) | 0x500000;
timestamp = 0;
return (0);
@@ -296,8 +296,10 @@ ulong get_tbclk (void)
#if defined(CONFIG_SMDK2400) || defined(CONFIG_TRAB)
tbclk = timer_load_val * 100;
-#elif defined(CONFIG_SMDK2410)
+#elif defined(CONFIG_SMDK2410) || defined(CONFIG_VCMA9)
tbclk = CFG_HZ;
+#else
+# error "tbclk not configured"
#endif
return tbclk;
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index a858dfa05eb..4a4825ab36a 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -446,6 +446,9 @@ fiq:
reset_cpu:
#ifdef CONFIG_S3C2400
bl disable_interrupts
+# ifdef CONFIG_TRAB
+ bl disable_vfd
+# endif
ldr r1, _rWTCON
ldr r2, _rWTCNT
/* Disable watchdog */
diff --git a/doc/README.JFFS2 b/doc/README.JFFS2
index 0d39c46453a..3243895150b 100644
--- a/doc/README.JFFS2
+++ b/doc/README.JFFS2
@@ -9,6 +9,14 @@ fsload - load binary file from a file system image
fsinfo - print information about file systems
ls - list files in a directory
+If you boot from a partition which is mounted writable, and you
+update your boot environment by replacing single files on that
+partition, you should also define CFG_JFFS2_SORT_FRAGMENTS. Scanning
+the JFFS2 filesystem takes *much* longer with this feature, though.
+Sorting is done while inserting into the fragment list, which is
+more or less a bubble sort. That algorithm is known to be O(n^2),
+thus you should really consider if you can avoid it!
+
There is two ways for JFFS2 to find the disk. The default way uses
the flash_info structure to find the start of a JFFS2 disk (called
diff --git a/drivers/cs8900.c b/drivers/cs8900.c
index b9fac8c54b1..d35332c8302 100644
--- a/drivers/cs8900.c
+++ b/drivers/cs8900.c
@@ -296,7 +296,7 @@ int cs8900_e2prom_read(unsigned char addr, unsigned short *value)
/* write a 16-bit word into the EEPROM */
/***********************************************************/
-void cs8900_e2prom_write(unsigned char addr, unsigned short value)
+int cs8900_e2prom_write(unsigned char addr, unsigned short value)
{
cs8900_e2prom_ready();
put_reg(PP_EECMD, EEPROM_WRITE_EN);
@@ -307,7 +307,7 @@ void cs8900_e2prom_write(unsigned char addr, unsigned short value)
put_reg(PP_EECMD, EEPROM_WRITE_DIS);
cs8900_e2prom_ready();
- return;
+ return 0;
}
#endif /* COMMANDS & CFG_NET */
diff --git a/drivers/cs8900.h b/drivers/cs8900.h
index dbfda3c15ba..d772cad667a 100644
--- a/drivers/cs8900.h
+++ b/drivers/cs8900.h
@@ -253,6 +253,6 @@
#define EEPROM_ERASE_CMD 0x0300
extern int cs8900_e2prom_read(uchar, ushort *);
-extern void cs8900_e2prom_write(uchar, ushort);
+extern int cs8900_e2prom_write(uchar, ushort);
#endif /* CONFIG_DRIVER_CS8900 */
diff --git a/drivers/s3c24x0_i2c.c b/drivers/s3c24x0_i2c.c
index bf435c9839a..b50176118ad 100644
--- a/drivers/s3c24x0_i2c.c
+++ b/drivers/s3c24x0_i2c.c
@@ -64,10 +64,12 @@ static int GetIICSDA(void)
return (rGPEDAT & 0x8000) >> 15;
}
+#if 0
static void SetIICSDA(int x)
{
rGPEDAT = (rGPEDAT & ~0x8000) | (x&1) << 15;
}
+#endif
static void SetIICSCL(int x)
{
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index bacec8e30cd..a5d9583596c 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -1,3 +1,4 @@
+/* vi: set sw=4 ts=4: */
/*
-------------------------------------------------------------------------
* Filename: jffs2.c
@@ -75,6 +76,42 @@
*
*/
+/*
+ * Bugfixing by Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>, (C) Mar/2003
+ *
+ * - overhaul of the memory management. Removed much of the "paper-bagging"
+ * in that part of the code, fixed several bugs, now frees memory when
+ * partition is changed.
+ * It's still ugly :-(
+ * - fixed a bug in jffs2_1pass_read_inode where the file length calculation
+ * was incorrect. Removed a bit of the paper-bagging as well.
+ * - removed double crc calculation for fragment headers in jffs2_private.h
+ * for speedup.
+ * - scan_empty rewritten in a more "standard" manner (non-paperbag, that is).
+ * - spinning wheel now spins depending on how much memory has been scanned
+ * - lots of small changes all over the place to "improve" readability.
+ * - implemented fragment sorting to ensure that the newest data is copied
+ * if there are multiple copies of fragments for a certain file offset.
+ *
+ * The fragment sorting feature must be enabled by CFG_JFFS2_SORT_FRAGMENTS.
+ * Sorting is done while adding fragments to the lists, which is more or less a
+ * bubble sort. This takes a lot of time, and is most probably not an issue if
+ * the boot filesystem is always mounted readonly.
+ *
+ * You should define it if the boot filesystem is mounted writable, and updates
+ * to the boot files are done by copying files to that filesystem.
+ *
+ *
+ * There's a big issue left: endianess is completely ignored in this code. Duh!
+ *
+ *
+ * You still should have paper bags at hand :-(. The code lacks more or less
+ * any comment, and is still arcane and difficult to read in places. As this
+ * is incompatible with any new code from the jffs2 maintainers anyway, it
+ * should probably be dumped and replaced by something like jffs2reader!
+ */
+
+
#include <common.h>
#include <config.h>
#include <malloc.h>
@@ -88,124 +125,197 @@
#include "jffs2_private.h"
-/* Compression names */
-static char *compr_names[] = {
- "NONE",
- "ZERO",
- "RTIME",
- "RUBINMIPS",
- "COPY",
- "DYNRUBIN",
- "ZLIB" };
-static char spinner[] = { '|', '\\', '-', '/' };
+#define NODE_CHUNK 1024 /* size of memory allocation chunk in b_nodes */
+#define SPIN_BLKSIZE 18 /* spin after having scanned 1<<BLKSIZE bytes */
+
+/* Debugging switches */
+#undef DEBUG_DIRENTS /* print directory entry list after scan */
+#undef DEBUG_FRAGMENTS /* print fragment list after scan */
+#undef DEBUG /* enable debugging messages */
+
-#define DEBUG
#ifdef DEBUG
# define DEBUGF(fmt,args...) printf(fmt ,##args)
#else
# define DEBUGF(fmt,args...)
#endif
-#define MALLOC_CHUNK (10*1024)
+/* Compression names */
+static char *compr_names[] = {
+ "NONE",
+ "ZERO",
+ "RTIME",
+ "RUBINMIPS",
+ "COPY",
+ "DYNRUBIN",
+ "ZLIB"
+};
+
+/* Spinning wheel */
+static char spinner[] = { '|', '/', '-', '\\' };
+
+/* Memory management */
+struct mem_block {
+ u32 index;
+ struct mem_block *next;
+ struct b_node nodes[NODE_CHUNK];
+};
+
+
+static void
+free_nodes(struct b_list *list)
+{
+ while (list->listMemBase != NULL) {
+ struct mem_block *next = list->listMemBase->next;
+ free( list->listMemBase );
+ list->listMemBase = next;
+ }
+}
static struct b_node *
-add_node(struct b_node *tail, u32 * count, u32 * memBase)
+add_node(struct b_list *list)
{
- u32 index;
- u32 memLimit;
+ u32 index = 0;
+ struct mem_block *memBase;
struct b_node *b;
- index = (*count) * sizeof(struct b_node) % MALLOC_CHUNK;
- memLimit = MALLOC_CHUNK;
-
+ memBase = list->listMemBase;
+ if (memBase != NULL)
+ index = memBase->index;
#if 0
putLabeledWord("add_node: index = ", index);
- putLabeledWord("add_node: memLimit = ", memLimit);
- putLabeledWord("add_node: memBase = ", *memBase);
+ putLabeledWord("add_node: memBase = ", list->listMemBase);
#endif
- /* we need not keep a list of bases since we'll never free the */
- /* memory, just jump the the kernel */
- if ((index == 0) || (index > memLimit)) { /* we need mode space before we continue */
- if ((*memBase = (u32) mmalloc(MALLOC_CHUNK)) == (u32) NULL) {
+ if (memBase == NULL || index >= NODE_CHUNK) {
+ /* we need more space before we continue */
+ memBase = mmalloc(sizeof(struct mem_block));
+ if (memBase == NULL) {
putstr("add_node: malloc failed\n");
return NULL;
}
+ memBase->next = list->listMemBase;
+ index = 0;
#if 0
putLabeledWord("add_node: alloced a new membase at ", *memBase);
#endif
}
/* now we have room to add it. */
- b = (struct b_node *) (*memBase + index);
-
- /* null on first call */
- if (tail)
- tail->next = b;
+ b = &memBase->nodes[index];
+ index ++;
-#if 0
- putLabeledWord("add_node: tail = ", (u32) tail);
- if (tail)
- putLabeledWord("add_node: tail->next = ", (u32) tail->next);
+ memBase->index = index;
+ list->listMemBase = memBase;
+ list->listCount++;
+ return b;
+}
+static struct b_node *
+insert_node(struct b_list *list, u32 offset)
+{
+ struct b_node *new;
+#ifdef CFG_JFFS2_SORT_FRAGMENTS
+ struct b_node *b, *prev;
#endif
-#if 0
- putLabeledWord("add_node: mb+i = ", (u32) (*memBase + index));
- putLabeledWord("add_node: b = ", (u32) b);
+ if (!(new = add_node(list))) {
+ putstr("add_node failed!\r\n");
+ return NULL;
+ }
+ new->offset = offset;
+
+#ifdef CFG_JFFS2_SORT_FRAGMENTS
+ if (list->listTail != NULL && list->listCompare(new, list->listTail))
+ prev = list->listTail;
+ else if (list->listLast != NULL && list->listCompare(new, list->listLast))
+ prev = list->listLast;
+ else
+ prev = NULL;
+
+ for (b = (prev ? prev->next : list->listHead);
+ b != NULL && list->listCompare(new, b);
+ prev = b, b = b->next) {
+ list->listLoops++;
+ }
+ if (b != NULL)
+ list->listLast = prev;
+
+ if (b != NULL) {
+ new->next = b;
+ if (prev != NULL)
+ prev->next = new;
+ else
+ list->listHead = new;
+ } else
#endif
- (*count)++;
- b->next = (struct b_node *) NULL;
- return b;
+ {
+ new->next = (struct b_node *) NULL;
+ if (list->listTail != NULL) {
+ list->listTail->next = new;
+ list->listTail = new;
+ } else {
+ list->listTail = list->listHead = new;
+ }
+ }
+ return new;
}
-/* we know we have empties at the start offset so we will hop */
-/* t points that would be non F if there were a node here to speed this up. */
-struct jffs2_empty_node {
- u32 first;
- u32 second;
-};
+#ifdef CFG_JFFS2_SORT_FRAGMENTS
+static int compare_inodes(struct b_node *new, struct b_node *old)
+{
+ struct jffs2_raw_inode *jNew = (struct jffs2_raw_inode *)new->offset;
+ struct jffs2_raw_inode *jOld = (struct jffs2_raw_inode *)old->offset;
+
+ return jNew->version < jOld->version;
+}
+
+static int compare_dirents(struct b_node *new, struct b_node *old)
+{
+ struct jffs2_raw_dirent *jNew = (struct jffs2_raw_dirent *)new->offset;
+ struct jffs2_raw_dirent *jOld = (struct jffs2_raw_dirent *)old->offset;
+
+ return jNew->version > jOld->version;
+}
+#endif
static u32
jffs2_scan_empty(u32 start_offset, struct part_info *part)
{
- u32 max = part->size - sizeof(struct jffs2_raw_inode);
+ char *max = part->offset + part->size - sizeof(struct jffs2_raw_inode);
+ char *offset = part->offset + start_offset;
- /* this would be either dir node_crc or frag isize */
- u32 offset = start_offset + 32;
- struct jffs2_empty_node *node;
-
- start_offset += 4;
- while (offset < max) {
- node = (struct jffs2_empty_node *) (part->offset + offset);
- if ((node->first == 0xFFFFFFFF) && (node->second == 0xFFFFFFFF)) {
- /* we presume that there were no nodes in between and advance in a hop */
- /* putLabeledWord("\t\tjffs2_scan_empty: empty at offset=",offset); */
- start_offset = offset + 4;
- offset = start_offset + 32; /* orig 32 + 4 bytes for the second==0xfffff */
- } else {
- return start_offset;
- }
+ while (offset < max && *(u32 *)offset == 0xFFFFFFFF) {
+ offset += sizeof(u32);
+ /* return if spinning is due */
+ if (((u32)offset & ((1 << SPIN_BLKSIZE)-1)) == 0) break;
}
- return start_offset;
+
+ return offset - part->offset;
}
static u32
jffs_init_1pass_list(struct part_info *part)
{
- if ( 0 != ( part->jffs2_priv=malloc(sizeof(struct b_lists)))){
- struct b_lists *pL =(struct b_lists *)part->jffs2_priv;
+ struct b_lists *pL;
- pL->dirListHead = pL->dirListTail = NULL;
- pL->fragListHead = pL->fragListTail = NULL;
- pL->dirListCount = 0;
- pL->dirListMemBase = 0;
- pL->fragListCount = 0;
- pL->fragListMemBase = 0;
- pL->partOffset = 0x0;
+ if (part->jffs2_priv != NULL) {
+ pL = (struct b_lists *)part->jffs2_priv;
+ free_nodes(&pL->frag);
+ free_nodes(&pL->dir);
+ free(pL);
+ }
+ if (NULL != (part->jffs2_priv = malloc(sizeof(struct b_lists)))) {
+ pL = (struct b_lists *)part->jffs2_priv;
+
+ memset(pL, 0, sizeof(*pL));
+#ifdef CFG_JFFS2_SORT_FRAGMENTS
+ pL->dir.listCompare = compare_dirents;
+ pL->frag.listCompare = compare_inodes;
+#endif
}
return 0;
}
@@ -216,21 +326,18 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
{
struct b_node *b;
struct jffs2_raw_inode *jNode;
- u32 totalSize = 1;
- u32 oldTotalSize = 0;
- u32 size = 0;
- char *lDest = (char *) dest;
+ u32 totalSize = 0;
+ u16 latestVersion = 0;
+ char *lDest;
char *src;
long ret;
int i;
u32 counter = 0;
- char totalSizeSet = 0;
-#if 0
- b = pL->fragListHead;
- while (b) {
+ for (b = pL->frag.listHead; b != NULL; b = b->next) {
jNode = (struct jffs2_raw_inode *) (b->offset);
if ((inode == jNode->ino)) {
+#if 0
putLabeledWord("\r\n\r\nread_inode: totlen = ", jNode->totlen);
putLabeledWord("read_inode: inode = ", jNode->ino);
putLabeledWord("read_inode: version = ", jNode->version);
@@ -241,58 +348,26 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
putLabeledWord("read_inode: compr = ", jNode->compr);
putLabeledWord("read_inode: usercompr = ", jNode->usercompr);
putLabeledWord("read_inode: flags = ", jNode->flags);
- }
-
- b = b->next;
- }
-
#endif
-
-#if 1
- b = pL->fragListHead;
- while (b && (size < totalSize)) {
- jNode = (struct jffs2_raw_inode *) (b->offset);
- if ((inode == jNode->ino)) {
- if ((jNode->isize == oldTotalSize) && (jNode->isize > totalSize)) {
- /* 2 consecutive isizes indicate file length */
+ /* get actual file length from the newest node */
+ if (jNode->version >= latestVersion) {
totalSize = jNode->isize;
- totalSizeSet = 1;
- } else if (!totalSizeSet) {
- totalSize = size + jNode->dsize + 1;
+ latestVersion = jNode->version;
}
- oldTotalSize = jNode->isize;
if(dest) {
src = ((char *) jNode) + sizeof(struct jffs2_raw_inode);
- /* lDest = (char *) (dest + (jNode->offset & ~3)); */
+ /* ignore data behind latest known EOF */
+ if (jNode->offset > totalSize)
+ continue;
+
lDest = (char *) (dest + jNode->offset);
#if 0
- putLabeledWord("\r\n\r\nread_inode: src = ", src);
+ putLabeledWord("read_inode: src = ", src);
putLabeledWord("read_inode: dest = ", lDest);
- putLabeledWord("read_inode: dsize = ", jNode->dsize);
- putLabeledWord("read_inode: csize = ", jNode->csize);
- putLabeledWord("read_inode: version = ", jNode->version);
- putLabeledWord("read_inode: isize = ", jNode->isize);
- putLabeledWord("read_inode: offset = ", jNode->offset);
- putLabeledWord("read_inode: compr = ", jNode->compr);
- putLabeledWord("read_inode: flags = ", jNode->flags);
#endif
switch (jNode->compr) {
case JFFS2_COMPR_NONE:
-#if 0
- {
- int i;
-
- if ((dest > 0xc0092ff0) && (dest < 0xc0093000))
- for (i = 0; i < first->length; i++) {
- putLabeledWord("\tCOMPR_NONE: src =", src + i);
- putLabeledWord("\tCOMPR_NONE: length =", first->length);
- putLabeledWord("\tCOMPR_NONE: dest =", dest + i);
- putLabeledWord("\tCOMPR_NONE: data =", (unsigned char) *(src + i));
- }
- }
-#endif
-
ret = (unsigned long) ldr_memcpy(lDest, src, jNode->dsize);
break;
case JFFS2_COMPR_ZERO:
@@ -320,22 +395,18 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
}
}
- size += jNode->dsize;
#if 0
- putLabeledWord("read_inode: size = ", size);
putLabeledWord("read_inode: totalSize = ", totalSize);
putLabeledWord("read_inode: compr ret = ", ret);
#endif
}
- b = b->next;
counter++;
}
-#endif
#if 0
- putLabeledWord("read_inode: returning = ", size);
+ putLabeledWord("read_inode: returning = ", totalSize);
#endif
- return size;
+ return totalSize;
}
/* find the inode from the slashless name given a parent */
@@ -354,18 +425,19 @@ jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino)
counter = 0;
/* we need to search all and return the inode with the highest version */
- for(b = pL->dirListHead;b;b=b->next,counter++) {
+ for(b = pL->dir.listHead; b; b = b->next, counter++) {
jDir = (struct jffs2_raw_dirent *) (b->offset);
- if ((pino == jDir->pino) && (len == jDir->nsize) && (jDir->ino) && /* 0 for unlink */
+ if ((pino == jDir->pino) && (len == jDir->nsize) &&
+ (jDir->ino) && /* 0 for unlink */
(!strncmp(jDir->name, name, len))) { /* a match */
if (jDir->version < version) continue;
- if(jDir->version==0) {
+ if(jDir->version == 0) {
/* Is this legal? */
putstr(" ** WARNING ** ");
putnstr(jDir->name, jDir->nsize);
putstr(" is version 0 (in find, ignoring)\r\n");
- } else if(jDir->version==version) {
+ } else if(jDir->version == version) {
/* Im pretty sure this isn't ... */
putstr(" ** ERROR ** ");
putnstr(jDir->name, jDir->nsize);
@@ -389,53 +461,53 @@ jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino)
static char *mkmodestr(unsigned long mode, char *str)
{
- static const char *l="xwr";
- int mask=1, i;
- char c;
-
- switch (mode & S_IFMT) {
- case S_IFDIR: str[0]='d'; break;
- case S_IFBLK: str[0]='b'; break;
- case S_IFCHR: str[0]='c'; break;
- case S_IFIFO: str[0]='f'; break;
- case S_IFLNK: str[0]='l'; break;
- case S_IFSOCK: str[0]='s'; break;
- case S_IFREG: str[0]='-'; break;
- default: str[0]='?';
- }
-
- for(i=0;i<9;i++) {
- c=l[i%3];
- str[9-i]=(mode & mask)?c:'-';
- mask=mask<<1;
- }
-
- if(mode & S_ISUID) str[3]=(mode & S_IXUSR)?'s':'S';
- if(mode & S_ISGID) str[6]=(mode & S_IXGRP)?'s':'S';
- if(mode & S_ISVTX) str[9]=(mode & S_IXOTH)?'t':'T';
- str[10]='\0';
- return str;
+ static const char *l = "xwr";
+ int mask = 1, i;
+ char c;
+
+ switch (mode & S_IFMT) {
+ case S_IFDIR: str[0] = 'd'; break;
+ case S_IFBLK: str[0] = 'b'; break;
+ case S_IFCHR: str[0] = 'c'; break;
+ case S_IFIFO: str[0] = 'f'; break;
+ case S_IFLNK: str[0] = 'l'; break;
+ case S_IFSOCK: str[0] = 's'; break;
+ case S_IFREG: str[0] = '-'; break;
+ default: str[0] = '?';
+ }
+
+ for(i = 0; i < 9; i++) {
+ c = l[i%3];
+ str[9-i] = (mode & mask)?c:'-';
+ mask = mask<<1;
+ }
+
+ if(mode & S_ISUID) str[3] = (mode & S_IXUSR)?'s':'S';
+ if(mode & S_ISGID) str[6] = (mode & S_IXGRP)?'s':'S';
+ if(mode & S_ISVTX) str[9] = (mode & S_IXOTH)?'t':'T';
+ str[10] = '\0';
+ return str;
}
static inline void dump_stat(struct stat *st, const char *name)
{
- char str[20];
- char s[64], *p;
+ char str[20];
+ char s[64], *p;
- if (st->st_mtime == (time_t)(-1)) /* some ctimes really hate -1 */
- st->st_mtime = 1;
+ if (st->st_mtime == (time_t)(-1)) /* some ctimes really hate -1 */
+ st->st_mtime = 1;
- ctime_r(&st->st_mtime, s/*, 64*/); /* newlib ctime doesn't have buflen */
+ ctime_r(&st->st_mtime, s/*,64*/); /* newlib ctime doesn't have buflen */
- if((p=strchr(s,'\n'))!=NULL) *p='\0';
- if((p=strchr(s,'\r'))!=NULL) *p='\0';
+ if ((p = strchr(s,'\n')) != NULL) *p = '\0';
+ if ((p = strchr(s,'\r')) != NULL) *p = '\0';
/*
- printf("%6lo %s %8ld %s %s\n", st->st_mode, mkmodestr(st->st_mode, str),
- st->st_size, s, name);
+ printf("%6lo %s %8ld %s %s\n", st->st_mode, mkmodestr(st->st_mode, str),
+ st->st_size, s, name);
*/
- printf(" %s %8ld %s %s", mkmodestr(st->st_mode,str), st->st_size, s, name);
+ printf(" %s %8ld %s %s", mkmodestr(st->st_mode,str), st->st_size, s, name);
}
static inline u32 dump_inode(struct b_lists * pL, struct jffs2_raw_dirent *d, struct jffs2_raw_inode *i)
@@ -446,16 +518,16 @@ static inline u32 dump_inode(struct b_lists * pL, struct jffs2_raw_dirent *d, st
if(!d || !i) return -1;
strncpy(fname, d->name, d->nsize);
- fname[d->nsize]='\0';
+ fname[d->nsize] = '\0';
memset(&st,0,sizeof(st));
- st.st_mtime=i->mtime;
- st.st_mode=i->mode;
- st.st_ino=i->ino;
+ st.st_mtime = i->mtime;
+ st.st_mode = i->mode;
+ st.st_ino = i->ino;
/* neither dsize nor isize help us.. do it the long way */
- st.st_size=jffs2_1pass_read_inode(pL, i->ino, NULL);
+ st.st_size = jffs2_1pass_read_inode(pL, i->ino, NULL);
dump_stat(&st, fname);
@@ -477,18 +549,18 @@ jffs2_1pass_list_inodes(struct b_lists * pL, u32 pino)
struct b_node *b;
struct jffs2_raw_dirent *jDir;
- for(b = pL->dirListHead;b;b=b->next) {
+ for (b = pL->dir.listHead; b; b = b->next) {
jDir = (struct jffs2_raw_dirent *) (b->offset);
- if ((pino == jDir->pino) && (jDir->ino)) { /* 0 inode for unlink */
- u32 i_version=0;
- struct jffs2_raw_inode *jNode, *i=NULL;
- struct b_node *b2 = pL->fragListHead;
+ if ((pino == jDir->pino) && (jDir->ino)) { /* ino=0 -> unlink */
+ u32 i_version = 0;
+ struct jffs2_raw_inode *jNode, *i = NULL;
+ struct b_node *b2 = pL->frag.listHead;
while (b2) {
jNode = (struct jffs2_raw_inode *) (b2->offset);
if (jNode->ino == jDir->ino
- && jNode->version>=i_version)
- i=jNode;
+ && jNode->version >= i_version)
+ i = jNode;
b2 = b2->next;
}
@@ -568,7 +640,7 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
unsigned char *src;
/* we need to search all and return the inode with the highest version */
- for(b = pL->dirListHead; b; b=b->next) {
+ for(b = pL->dir.listHead; b; b = b->next) {
jDir = (struct jffs2_raw_dirent *) (b->offset);
if (ino == jDir->ino) {
if(jDir->version < version) continue;
@@ -593,8 +665,9 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
/* now we found the right entry again. (shoulda returned inode*) */
if (jDirFound->type != DT_LNK)
return jDirFound->ino;
- /* so its a soft link so we follow it again. */
- b2 = pL->fragListHead;
+
+ /* it's a soft link so we follow it again. */
+ b2 = pL->frag.listHead;
while (b2) {
jNode = (struct jffs2_raw_inode *) (b2->offset);
if (jNode->ino == jDirFound->ino) {
@@ -644,7 +717,8 @@ jffs2_1pass_search_list_inodes(struct b_lists * pL, const char *fname, u32 pino)
tmp[i] = c[i + 1];
tmp[i] = '\0';
/* only a failure if we arent looking at top level */
- if (!(pino = jffs2_1pass_find_inode(pL, working_tmp, pino)) && (working_tmp[0])) {
+ if (!(pino = jffs2_1pass_find_inode(pL, working_tmp, pino)) &&
+ (working_tmp[0])) {
putstr("find_inode failed for name=");
putstr(working_tmp);
putstr("\r\n");
@@ -674,29 +748,30 @@ jffs2_1pass_rescan_needed(struct part_info *part)
{
struct b_node *b;
struct jffs2_unknown_node *node;
- struct b_lists *pL=(struct b_lists *)part->jffs2_priv;
+ struct b_lists *pL = (struct b_lists *)part->jffs2_priv;
if (part->jffs2_priv == 0){
DEBUGF ("rescan: First time in use\n");
return 1;
}
/* if we have no list, we need to rescan */
- if (pL->fragListCount == 0) {
+ if (pL->frag.listCount == 0) {
DEBUGF ("rescan: fraglist zero\n");
return 1;
}
- /* or if we are scanninga new partition */
+ /* or if we are scanning a new partition */
if (pL->partOffset != part->offset) {
DEBUGF ("rescan: different partition\n");
return 1;
}
- /* but suppose someone reflashed the root partition at the same offset... */
- b = pL->dirListHead;
+ /* but suppose someone reflashed a partition at the same offset... */
+ b = pL->dir.listHead;
while (b) {
node = (struct jffs2_unknown_node *) (b->offset);
if (node->nodetype != JFFS2_NODETYPE_DIRENT) {
- DEBUGF ("rescan: fs changed beneath me? (%lx)\n", (unsigned long) b->offset);
+ DEBUGF ("rescan: fs changed beneath me? (%lx)\n",
+ (unsigned long) b->offset);
return 1;
}
b = b->next;
@@ -704,12 +779,71 @@ jffs2_1pass_rescan_needed(struct part_info *part)
return 0;
}
+#ifdef DEBUG_FRAGMENTS
+static void
+dump_fragments(struct b_lists *pL)
+{
+ struct b_node *b;
+ struct jffs2_raw_inode *jNode;
+
+ putstr("\r\n\r\n******The fragment Entries******\r\n");
+ b = pL->frag.listHead;
+ while (b) {
+ jNode = (struct jffs2_raw_inode *) (b->offset);
+ putLabeledWord("\r\n\tbuild_list: FLASH_OFFSET = ", b->offset);
+ putLabeledWord("\tbuild_list: totlen = ", jNode->totlen);
+ putLabeledWord("\tbuild_list: inode = ", jNode->ino);
+ putLabeledWord("\tbuild_list: version = ", jNode->version);
+ putLabeledWord("\tbuild_list: isize = ", jNode->isize);
+ putLabeledWord("\tbuild_list: atime = ", jNode->atime);
+ putLabeledWord("\tbuild_list: offset = ", jNode->offset);
+ putLabeledWord("\tbuild_list: csize = ", jNode->csize);
+ putLabeledWord("\tbuild_list: dsize = ", jNode->dsize);
+ putLabeledWord("\tbuild_list: compr = ", jNode->compr);
+ putLabeledWord("\tbuild_list: usercompr = ", jNode->usercompr);
+ putLabeledWord("\tbuild_list: flags = ", jNode->flags);
+ putLabeledWord("\tbuild_list: offset = ", b->offset); // FIXME: ? [RS]
+ b = b->next;
+ }
+}
+#endif
+
+#ifdef DEBUG_DIRENTS
+static void
+dump_dirents(struct b_lists *pL)
+{
+ struct b_node *b;
+ struct jffs2_raw_dirent *jDir;
+
+ putstr("\r\n\r\n******The directory Entries******\r\n");
+ b = pL->dir.listHead;
+ while (b) {
+ jDir = (struct jffs2_raw_dirent *) (b->offset);
+ putstr("\r\n");
+ putnstr(jDir->name, jDir->nsize);
+ putLabeledWord("\r\n\tbuild_list: magic = ", jDir->magic);
+ putLabeledWord("\tbuild_list: nodetype = ", jDir->nodetype);
+ putLabeledWord("\tbuild_list: hdr_crc = ", jDir->hdr_crc);
+ putLabeledWord("\tbuild_list: pino = ", jDir->pino);
+ putLabeledWord("\tbuild_list: version = ", jDir->version);
+ putLabeledWord("\tbuild_list: ino = ", jDir->ino);
+ putLabeledWord("\tbuild_list: mctime = ", jDir->mctime);
+ putLabeledWord("\tbuild_list: nsize = ", jDir->nsize);
+ putLabeledWord("\tbuild_list: type = ", jDir->type);
+ putLabeledWord("\tbuild_list: node_crc = ", jDir->node_crc);
+ putLabeledWord("\tbuild_list: name_crc = ", jDir->name_crc);
+ putLabeledWord("\tbuild_list: offset = ", b->offset); // FIXME: ? [RS]
+ b = b->next;
+ }
+}
+#endif
+
static u32
jffs2_1pass_build_lists(struct part_info * part)
{
struct b_lists *pL;
struct jffs2_unknown_node *node;
- u32 offset;
+ u32 offset, oldoffset = 0;
u32 max = part->size - sizeof(struct jffs2_raw_inode);
u32 counter = 0;
u32 counter4 = 0;
@@ -722,71 +856,52 @@ jffs2_1pass_build_lists(struct part_info * part)
/* lcd_off(); */
/* if we are building a list we need to refresh the cache. */
- /* note that since we don't free our memory, eventually this will be bad. */
- /* but we're a bootldr so what the hell. */
jffs_init_1pass_list(part);
- pL=(struct b_lists *)part->jffs2_priv;
+ pL = (struct b_lists *)part->jffs2_priv;
pL->partOffset = part->offset;
offset = 0;
printf("Scanning JFFS2 FS: ");
/* start at the beginning of the partition */
while (offset < max) {
- if (! (++counter%10000))
- printf("\b\b%c ", spinner[(counter / 10000) % 4]);
+ if ((oldoffset >> SPIN_BLKSIZE) != (offset >> SPIN_BLKSIZE)) {
+ printf("\b\b%c ", spinner[counter++ % sizeof(spinner)]);
+ oldoffset = offset;
+ }
node = (struct jffs2_unknown_node *) (part->offset + offset);
if (node->magic == JFFS2_MAGIC_BITMASK && hdr_crc(node)) {
/* if its a fragment add it */
- if (node->nodetype == JFFS2_NODETYPE_INODE && inode_crc((struct jffs2_raw_inode *) node)) {
- if (!(pL->fragListTail = add_node(pL->fragListTail, &(pL->fragListCount),
- &(pL->fragListMemBase)))) {
- putstr("add_node failed!\r\n");
+ if (node->nodetype == JFFS2_NODETYPE_INODE &&
+ inode_crc((struct jffs2_raw_inode *) node)) {
+ if (insert_node(&pL->frag, (u32) part->offset +
+ offset) == NULL)
return 0;
- }
- pL->fragListTail->offset = (u32) (part->offset + offset);
- if (!pL->fragListHead)
- pL->fragListHead = pL->fragListTail;
} else if (node->nodetype == JFFS2_NODETYPE_DIRENT &&
dirent_crc((struct jffs2_raw_dirent *) node) &&
dirent_name_crc((struct jffs2_raw_dirent *) node)) {
if (! (counterN%100))
printf("\b\b. ");
-#if 0
- printf("Found DIRENT @ 0x%lx\n", offset);
- putstr("\r\nbuild_lists:p&l ->");
- putnstr(((struct jffs2_raw_dirent *) node)->name, ((struct jffs2_raw_dirent *) node)->nsize);
- putstr("\r\n");
- putLabeledWord("\tpino = ", ((struct jffs2_raw_dirent *) node)->pino);
- putLabeledWord("\tnsize = ", ((struct jffs2_raw_dirent *) node)->nsize);
-#endif
-
- if (!(pL->dirListTail = add_node(pL->dirListTail, &(pL->dirListCount), &(pL->dirListMemBase)))) {
- putstr("add_node failed!\r\n");
+ if (insert_node(&pL->dir, (u32) part->offset +
+ offset) == NULL)
return 0;
- }
- pL->dirListTail->offset = (u32) (part->offset + offset);
-#if 0
- putLabeledWord("\ttail = ", (u32) pL->dirListTail);
- putstr("\ttailName ->");
- putnstr(((struct jffs2_raw_dirent *) (pL->dirListTail->offset))->name,
- ((struct jffs2_raw_dirent *) (pL->dirListTail->offset))->nsize);
- putstr("\r\n");
-#endif
- if (!pL->dirListHead)
- pL->dirListHead = pL->dirListTail;
counterN++;
} else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) {
if (node->totlen != sizeof(struct jffs2_unknown_node))
- printf("OOPS Cleanmarker has bad size %d != %d\n", node->totlen, sizeof(struct jffs2_unknown_node));
+ printf("OOPS Cleanmarker has bad size "
+ "%d != %d\n", node->totlen,
+ sizeof(struct jffs2_unknown_node));
} else {
- printf("Unknown node type: %x len %d offset 0x%x\n", node->nodetype, node->totlen, offset);
+ printf("Unknown node type: %x len %d "
+ "offset 0x%x\n", node->nodetype,
+ node->totlen, offset);
}
offset += ((node->totlen + 3) & ~3);
counterF++;
- } else if (node->magic == JFFS2_EMPTY_BITMASK && node->nodetype == JFFS2_EMPTY_BITMASK) {
+ } else if (node->magic == JFFS2_EMPTY_BITMASK &&
+ node->nodetype == JFFS2_EMPTY_BITMASK) {
offset = jffs2_scan_empty(offset, part);
- } else { /* if we know nothing of the filesystem, we just step and look. */
+ } else { /* if we know nothing, we just step and look. */
offset += 4;
counter4++;
}
@@ -799,66 +914,21 @@ jffs2_1pass_build_lists(struct part_info * part)
/* splash(); */
#if 0
- putLabeledWord("dir entries = ", pL->dirListCount);
- putLabeledWord("frag entries = ", pL->fragListCount);
+ putLabeledWord("dir entries = ", pL->dir.listCount);
+ putLabeledWord("frag entries = ", pL->frag.listCount);
putLabeledWord("+4 increments = ", counter4);
putLabeledWord("+file_offset increments = ", counterF);
#endif
-#undef SHOW_ALL
-#undef SHOW_ALL_FRAGMENTS
-
-#ifdef SHOW_ALL
- {
- struct b_node *b;
- struct b_node *b2;
- struct jffs2_raw_dirent *jDir;
- struct jffs2_raw_inode *jNode;
-
- putstr("\r\n\r\n******The directory Entries******\r\n");
- b = pL->dirListHead;
- while (b) {
- jDir = (struct jffs2_raw_dirent *) (b->offset);
- putstr("\r\n");
- putnstr(jDir->name, jDir->nsize);
- putLabeledWord("\r\n\tbuild_list: magic = ", jDir->magic);
- putLabeledWord("\tbuild_list: nodetype = ", jDir->nodetype);
- putLabeledWord("\tbuild_list: hdr_crc = ", jDir->hdr_crc);
- putLabeledWord("\tbuild_list: pino = ", jDir->pino);
- putLabeledWord("\tbuild_list: version = ", jDir->version);
- putLabeledWord("\tbuild_list: ino = ", jDir->ino);
- putLabeledWord("\tbuild_list: mctime = ", jDir->mctime);
- putLabeledWord("\tbuild_list: nsize = ", jDir->nsize);
- putLabeledWord("\tbuild_list: type = ", jDir->type);
- putLabeledWord("\tbuild_list: node_crc = ", jDir->node_crc);
- putLabeledWord("\tbuild_list: name_crc = ", jDir->name_crc);
- b = b->next;
- }
+#ifdef DEBUG_DIRENTS
+ dump_dirents(pL);
+#endif
-#ifdef SHOW_ALL_FRAGMENTS
- putstr("\r\n\r\n******The fragment Entries******\r\n");
- b = pL->fragListHead;
- while (b) {
- jNode = (struct jffs2_raw_inode *) (b->offset);
- putLabeledWord("\r\n\tbuild_list: FLASH_OFFSET = ", b->offset);
- putLabeledWord("\tbuild_list: totlen = ", jNode->totlen);
- putLabeledWord("\tbuild_list: inode = ", jNode->ino);
- putLabeledWord("\tbuild_list: version = ", jNode->version);
- putLabeledWord("\tbuild_list: isize = ", jNode->isize);
- putLabeledWord("\tbuild_list: atime = ", jNode->atime);
- putLabeledWord("\tbuild_list: offset = ", jNode->offset);
- putLabeledWord("\tbuild_list: csize = ", jNode->csize);
- putLabeledWord("\tbuild_list: dsize = ", jNode->dsize);
- putLabeledWord("\tbuild_list: compr = ", jNode->compr);
- putLabeledWord("\tbuild_list: usercompr = ", jNode->usercompr);
- putLabeledWord("\tbuild_list: flags = ", jNode->flags);
- b = b->next;
- }
-#endif /* SHOW_ALL_FRAGMENTS */
- }
+#ifdef DEBUG_FRAGMENTS
+ dump_fragments(pL);
+#endif
-#endif /* SHOW_ALL */
/* give visual feedback that we are done scanning the flash */
led_blink(0x0, 0x0, 0x1, 0x1); /* off, forever, on 100ms, off 100ms */
return 1;
@@ -875,13 +945,13 @@ jffs2_1pass_fill_info(struct b_lists * pL, struct b_jffs2_info * piL)
struct jffs2_raw_inode *jNode;
int i;
- b = pL->fragListHead;
for (i = 0; i < JFFS2_NUM_COMPR; i++) {
piL->compr_info[i].num_frags = 0;
piL->compr_info[i].compr_sum = 0;
piL->compr_info[i].decompr_sum = 0;
}
+ b = pL->frag.listHead;
while (b) {
jNode = (struct jffs2_raw_inode *) (b->offset);
if (jNode->compr < JFFS2_NUM_COMPR) {
@@ -917,7 +987,7 @@ jffs2_1pass_ls(struct part_info * part, const char *fname)
long ret = 0;
u32 inode;
- if (! (pl = jffs2_get_list(part, "ls")))
+ if (! (pl = jffs2_get_list(part, "ls")))
return 0;
if (! (inode = jffs2_1pass_search_list_inodes(pl, fname, 1))) {
@@ -983,7 +1053,7 @@ jffs2_1pass_info(struct part_info * part)
return 0;
jffs2_1pass_fill_info(pl, &info);
- for (i=0; i < JFFS2_NUM_COMPR; i++) {
+ for (i = 0; i < JFFS2_NUM_COMPR; i++) {
printf("Compression: %s\n", compr_names[i]);
printf("\tfrag count: %d\n", info.compr_info[i].num_frags);
printf("\tcompressed sum: %d\n", info.compr_info[i].compr_sum);
diff --git a/fs/jffs2/jffs2_private.h b/fs/jffs2/jffs2_private.h
index ca0af1f9a4b..c6d5fe36032 100644
--- a/fs/jffs2/jffs2_private.h
+++ b/fs/jffs2/jffs2_private.h
@@ -3,23 +3,31 @@
#include <jffs2/jffs2.h>
+
struct b_node {
u32 offset;
struct b_node *next;
};
+struct b_list {
+ struct b_node *listTail;
+ struct b_node *listHead;
+#ifdef CFG_JFFS2_SORT_FRAGMENTS
+ struct b_node *listLast;
+ int (*listCompare)(struct b_node *new, struct b_node *node);
+ u32 listLoops;
+#endif
+ u32 listCount;
+ struct mem_block *listMemBase;
+};
+
struct b_lists {
char *partOffset;
- struct b_node *dirListTail;
- struct b_node *dirListHead;
- u32 dirListCount;
- u32 dirListMemBase;
- struct b_node *fragListTail;
- struct b_node *fragListHead;
- u32 fragListCount;
- u32 fragListMemBase;
+ struct b_list dir;
+ struct b_list frag;
};
+
struct b_compr_info {
u32 num_frags;
u32 compr_sum;
@@ -33,11 +41,14 @@ struct b_jffs2_info {
static inline int
hdr_crc(struct jffs2_unknown_node *node)
{
+#if 1
u32 crc = crc32_no_comp(0, (unsigned char *)node, sizeof(struct jffs2_unknown_node) - 4);
- u32 crc_blah = crc32_no_comp(~0, (unsigned char *)node, sizeof(struct jffs2_unknown_node) - 4);
-
- crc_blah ^= ~0;
+#else
+ /* what's the semantics of this? why is this here? */
+ u32 crc = crc32_no_comp(~0, (unsigned char *)node, sizeof(struct jffs2_unknown_node) - 4);
+ crc ^= ~0;
+#endif
if (node->hdr_crc != crc) {
return 0;
} else {
diff --git a/include/asm-arm/global_data.h b/include/asm-arm/global_data.h
index e0a95e081b4..892710df405 100644
--- a/include/asm-arm/global_data.h
+++ b/include/asm-arm/global_data.h
@@ -44,7 +44,6 @@ typedef struct global_data {
#ifdef CONFIG_VFD
unsigned long fb_base; /* base address of frame buffer */
unsigned char vfd_type; /* display type */
- unsigned char vfd_inv_data; /* inverted data lines ? */
#endif
#if 0
unsigned long cpu_clk; /* CPU clock in Hz! */
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 0d55ca25b46..122419f1e6b 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -71,22 +71,37 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
#include <asm/arch/io.h>
/*
- * IO definitions. We define {out,in,outs,ins}[bwl] if __io is defined
- * by the machine. Otherwise, these definitions are left for the machine
- * specific header files to pick up.
+ * IO port access primitives
+ * -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped. Note that these are defined to perform little endian accesses
+ * only. Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerious
+ * ARM documents:
+ *
+ * PCI: D0-D7 D8-D15 D16-D23 D24-D31
+ * ARM: D24-D31 D16-D23 D8-D15 D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
*
* Note that we prevent GCC re-ordering or caching values in expressions
* by introducing sequence points into the in*() definitions. Note that
* __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
*/
#ifdef __io
#define outb(v,p) __raw_writeb(v,__io(p))
-#define outw(v,p) __raw_writew(v,__io(p))
-#define outl(v,p) __raw_writel(v,__io(p))
+#define outw(v,p) __raw_writew(cpu_to_le16(v),__io(p))
+#define outl(v,p) __raw_writel(cpu_to_le32(v),__io(p))
-#define inb(p) ({ unsigned int __v = __raw_readb(__io(p)); __v; })
-#define inw(p) ({ unsigned int __v = __raw_readw(__io(p)); __v; })
-#define inl(p) ({ unsigned int __v = __raw_readl(__io(p)); __v; })
+#define inb(p) ({ unsigned int __v = __raw_readb(__io(p)); __v; })
+#define inw(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(__io(p))); __v; })
+#define inl(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(__io(p))); __v; })
#define outsb(p,d,l) __raw_writesb(__io(p),d,l)
#define outsw(p,d,l) __raw_writesw(__io(p),d,l)
@@ -171,20 +186,20 @@ extern void __readwrite_bug(const char *fn);
*/
#ifdef __mem_pci
-#define readb(addr) ({ unsigned int __v = __raw_readb(__mem_pci(addr)); __v; })
-#define readw(addr) ({ unsigned int __v = __raw_readw(__mem_pci(addr)); __v; })
-#define readl(addr) ({ unsigned int __v = __raw_readl(__mem_pci(addr)); __v; })
+#define readb(c) ({ unsigned int __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw(c) ({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
+#define readl(c) ({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
-#define writeb(val,addr) __raw_writeb(val,__mem_pci(addr))
-#define writew(val,addr) __raw_writew(val,__mem_pci(addr))
-#define writel(val,addr) __raw_writel(val,__mem_pci(addr))
+#define writeb(v,c) __raw_writeb(v,__mem_pci(c))
+#define writew(v,c) __raw_writew(cpu_to_le16(v),__mem_pci(c))
+#define writel(v,c) __raw_writel(cpu_to_le32(v),__mem_pci(c))
-#define memset_io(a,b,c) _memset_io(__mem_pci(a),(b),(c))
-#define memcpy_fromio(a,b,c) _memcpy_fromio((a),__mem_pci(b),(c))
-#define memcpy_toio(a,b,c) _memcpy_toio(__mem_pci(a),(b),(c))
+#define memset_io(c,v,l) _memset_io(__mem_pci(c),(v),(l))
+#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l))
+#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l))
-#define eth_io_copy_and_sum(a,b,c,d) \
- eth_copy_and_sum((a),__mem_pci(b),(c),(d))
+#define eth_io_copy_and_sum(s,c,l,b) \
+ eth_copy_and_sum((s),__mem_pci(c),(l),(b))
static inline int
check_signature(unsigned long io_addr, const unsigned char *signature,
@@ -219,14 +234,6 @@ out:
#endif /* __mem_pci */
/*
- * remap a physical address `phys' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#define io_remap_page_range(from,phys,size,prot) \
- remap_page_range(from,phys,size,prot)
-
-
-/*
* If this architecture has ISA IO, then define the isa_read/isa_write
* macros.
*/
@@ -245,6 +252,10 @@ out:
#define isa_eth_io_copy_and_sum(a,b,c,d) \
eth_copy_and_sum((a),__mem_isa(b),(c),(d))
+#ifndef PCI_MEMORY_VADDR /* XXX problem not understood -- wd */
+#define PCI_MEMORY_VADDR 0
+#endif /* XXX */
+
static inline int
isa_check_signature(unsigned long io_addr, const unsigned char *signature,
int length)
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index a8ee99ae003..c2267bd86d4 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -60,9 +60,9 @@
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 19200
+#define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_I2C | CFG_CMD_EEPROM) & ~CFG_CMD_NET)
-
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -90,13 +90,13 @@
/*
* Size of malloc() pool; this lives below the uppermost 128 KiB which are
* used for the RAM copy of the uboot code
+ *
*/
-/* #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) */
-#define CFG_MALLOC_LEN (128*1024)
+#define CFG_MALLOC_LEN (256*1024)
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "uboot> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 128 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
@@ -106,10 +106,7 @@
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR 0xa7fe0000 /* default load address */
- /* RS: where is this documented? */
- /* RS: is this where U-Boot is */
- /* RS: relocated to in RAM? */
+#define CFG_LOAD_ADDR 0xa3000000 /* load kernel to this address */
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
/* RS: the oscillator is actually 3680130?? */
@@ -128,9 +125,9 @@
/*
* I2C bus
*/
-#define CONFIG_HARD_I2C 1
-#define CFG_I2C_SPEED 50000
-#define CFG_I2C_SLAVE 0xfe
+#define CONFIG_HARD_I2C 1
+#define CFG_I2C_SPEED 50000
+#define CFG_I2C_SLAVE 0xfe
#define CFG_ENV_IS_IN_EEPROM 1
@@ -138,9 +135,20 @@
#define CFG_ENV_SIZE 1024 /* 1 KiB */
#define CFG_I2C_EEPROM_ADDR 0x50 /* A0 = 0 (hardwired) */
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 15 /* between stop and start */
#define CFG_I2C_EEPROM_ADDR_LEN 2 /* length of address */
#define CFG_EEPROM_SIZE 4096 /* size in bytes */
+#define CFG_I2C_INIT_BOARD 1 /* board has it's own init */
+
+/*
+ * SMSC91C111 Network Card
+ */
+#define CONFIG_DRIVER_SMC91111 1
+#define CONFIG_SMC91111_BASE 0x14000000 /* chip select 5 */
+#undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */
+#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
+#undef CONFIG_SHOW_ACTIVITY
+#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
/*
* Stack sizes
@@ -168,11 +176,19 @@
#define CFG_FLASH_BASE PHYS_FLASH_1
+
/*
- * GPIO settings;
+ * JFFS2 Partitions
*/
+#define CFG_JFFS_CUSTOM_PART 1 /* see board/innokom/flash.c */
+#define CONFIG_MTD_INNOKOM_16MB 1 /* development flash */
+#undef CONFIG_MTD_INNOKOM_64MB /* production flash */
-/* GP15 == nCS1 is 1
+
+/*
+ * GPIO settings; see BDI2000 config file for details
+ *
+ * GP15 == nCS1 is 1
* GP24 == SFRM is 1
* GP25 == TXD is 1
* GP33 == nCS5 is 1
@@ -273,6 +289,7 @@
#define CFG_GAFR2_L_VAL 0xA0000000
#define CFG_GAFR2_U_VAL 0x00000002
+
/* FIXME: set GPIO_RER/FER */
/* RDH = 1
@@ -285,9 +302,8 @@
/*
* Memory settings
- */
-
-/* This is the configuration for nCS0/1 -> flash banks
+ *
+ * This is the configuration for nCS0/1 -> flash banks
* configuration for nCS1:
* [31] 0 - Slower Device
* [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
@@ -321,7 +337,7 @@
* [03] 1 - 16 Bit bus width
* [02:00] 100 - variable latency I/O
*/
-#define CFG_MSC1_VAL 0x132C593C /* TDM switch, DSP */
+#define CFG_MSC1_VAL 0x123C593C /* TDM switch, DSP */
/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
*
@@ -340,7 +356,7 @@
* [03] 1 - 16 Bit bus width
* [02:00] 100 - variable latency I/O
*/
-#define CFG_MSC2_VAL 0x132C6CDC /* extra bus, LAN controller */
+#define CFG_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */
/* MDCNFG: SDRAM Configuration Register
*
@@ -359,16 +375,15 @@
* [12] 1 - SA1111 compatiblity mode
* [11] 1 - latch return data with return clock
* [10] 0 - no alternate addressing for pair 0/1
- * [09:08] 01 - tRP=2*MemClk; CL=2; tRCD=2*MemClk; tRAS=5*MemClk; tRC=8*MemClk
+ * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
* [7] 1 - 4 internal banks in lower partition pair
* [06:05] 10 - 13 row address bits for partition 0/1
* [04:03] 01 - 9 column address bits for partition 0/1
* [02] 0 - SDRAM partition 0/1 width is 32 bit
* [01] 0 - disable SDRAM partition 1
* [00] 1 - enable SDRAM partition 0
- *
- * use the configuration above but disable partition 0
*/
+/* use the configuration above but disable partition 0 */
#define CFG_MDCNFG_VAL 0x000019c8
/* MDREFR: SDRAM Refresh Control Register
@@ -434,11 +449,4 @@
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
-#if 0
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000)
- /* Addr of Environment Sector */
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-#endif
-
#endif /* __CONFIG_H */
diff --git a/include/i2c.h b/include/i2c.h
index 43d76fd8185..6d39080d8f5 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -51,6 +51,9 @@
* repeatedly to change the speed and slave addresses.
*/
void i2c_init(int speed, int slaveaddr);
+#ifdef CFG_I2C_INIT_BOARD
+void i2c_init_board(void);
+#endif
/*
* Probe the given I2C chip address. Returns 0 if a chip responded,