summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--CHANGELOG4
-rw-r--r--MAKEALL33
-rw-r--r--Makefile39
-rw-r--r--board/netphone/flash.c23
-rw-r--r--board/netphone/phone_console.c106
-rw-r--r--board/netta/Makefile2
-rw-r--r--board/netta/codec.c1475
-rw-r--r--board/netta/dsp.c293
-rw-r--r--board/netta/netta.c29
-rw-r--r--board/netta2/Makefile40
-rw-r--r--board/netta2/config.mk28
-rw-r--r--board/netta2/flash.c506
-rw-r--r--board/netta2/netta2.c664
-rw-r--r--board/netta2/u-boot.lds138
-rw-r--r--board/netta2/u-boot.lds.debug135
-rw-r--r--cpu/mpc8xx/fec.c2
-rw-r--r--include/configs/NETPHONE.h21
-rw-r--r--include/configs/NETTA.h46
-rw-r--r--include/configs/NETTA2.h762
-rw-r--r--include/post.h1
-rw-r--r--include/status_led.h2
-rw-r--r--post/Makefile2
-rw-r--r--post/codec.c48
-rw-r--r--post/tests.c13
24 files changed, 4241 insertions, 171 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 9a92ab7a682..6b54e8f9278 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Pantelis Antoniou, 5 May 2004:
+ - Intracom board update.
+ - Add Codec POST.
+
* Add support for the second Ethernet interface for the 'PPChameleon'
board.
diff --git a/MAKEALL b/MAKEALL
index 228d96d9565..f2d22bbbddc 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -33,22 +33,23 @@ LIST_5xxx=" \
#########################################################################
LIST_8xx=" \
- AdderII ADS860 AMX860 c2mon \
- CCM cogent_mpc8xx MPC885ADS ESTEEM192E \
- ETX094 ELPT860 FADS823 FADS850SAR \
- FADS860T FLAGADM FPS850L GEN860T \
- GEN860T_SC GENIETV GTH hermes \
- IAD210 ICU862_100MHz IP860 IVML24 \
- IVML24_128 IVML24_256 IVMS8 IVMS8_128 \
- IVMS8_256 KUP4K KUP4X LANTEC \
- lwmon MBX MBX860T MHPC \
- MPC86xADS MVS1 NETVIA NETVIA_V2 \
- NX823 pcu_e QS823 QS850 \
- QS860T R360MPI RBC823 rmu \
- RPXClassic RPXlite RRvision SM850 \
- SPD823TS svm_sc8xx SXNI855T TOP860 \
- TQM823L TQM823L_LCD TQM850L TQM855L \
- TQM860L v37 NETTA NETPHONE \
+ ADS860 ICU862_100MHz NETPHONE SPD823TS \
+ AMX860 IP860 NETTA SXNI855T \
+ AdderII IVML24 NETTA2 TOP860 \
+ CCM IVML24_128 NETTA_ISDN TQM823L \
+ ELPT860 IVML24_256 NETVIA TQM823L_LCD \
+ ESTEEM192E IVMS8 NETVIA_V2 TQM850L \
+ ETX094 IVMS8_128 NX823 TQM855L \
+ FADS823 IVMS8_256 QS823 TQM860L \
+ FADS850SAR KUP4K QS850 c2mon \
+ FADS860T KUP4X QS860T cogent_mpc8xx \
+ FLAGADM LANTEC R360MPI hermes \
+ FPS850L MBX RBC823 lwmon \
+ GEN860T MBX860T RPXClassic pcu_e \
+ GEN860T_SC MHPC RPXlite rmu \
+ GENIETV MPC86xADS RRvision svm_sc8xx \
+ GTH MPC885ADS SM850 v37 \
+ IAD210 MVS1
"
#########################################################################
diff --git a/Makefile b/Makefile
index 407f5c4cfd5..453195675eb 100644
--- a/Makefile
+++ b/Makefile
@@ -417,19 +417,50 @@ NETPHONE_config: unconfig
}
@./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
-xtract_NETTA = $(subst _ISDN,,$(subst _config,,$1))
+xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
+NETTA_ISDN_6412_SWAPHOOK_config \
+NETTA_ISDN_SWAPHOOK_config \
+NETTA_6412_SWAPHOOK_config \
+NETTA_SWAPHOOK_config \
+NETTA_ISDN_6412_config \
NETTA_ISDN_config \
+NETTA_6412_config \
NETTA_config: unconfig
@ >include/config.h
- @[ -z "$(findstring NETTA_config,$@)" ] || \
+ @[ -z "$(findstring ISDN_,$@)" ] || \
+ { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \
+ }
+ @[ -n "$(findstring ISDN_,$@)" ] || \
{ echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \
}
- @[ -z "$(findstring NETTA_ISDN_config,$@)" ] || \
- { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \
+ @[ -z "$(findstring 6412_,$@)" ] || \
+ { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \
+ }
+ @[ -n "$(findstring 6412_,$@)" ] || \
+ { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \
+ }
+ @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
+ { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \
+ }
+ @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
+ { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \
}
@./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta
+xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
+
+NETTA2_V2_config \
+NETTA2_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring NETTA2_config,$@)" ] || \
+ { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \
+ }
+ @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
+ { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \
+ }
+ @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
+
NX823_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx nx823
diff --git a/board/netphone/flash.c b/board/netphone/flash.c
index adbc28e1014..0c81140f238 100644
--- a/board/netphone/flash.c
+++ b/board/netphone/flash.c
@@ -87,21 +87,22 @@ unsigned long flash_init(void)
#if CONFIG_NETPHONE_VERSION == 2
size1 = flash_get_size((vu_long *) FLASH_BASE4_PRELIM, &flash_info[1]);
+ if (size1 > 0) {
+ if (flash_info[1].flash_id == FLASH_UNKNOWN)
+ printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", size1, size1 << 20);
- if (flash_info[1].flash_id == FLASH_UNKNOWN && size1 > 0) {
- printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", size1, size1 << 20);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or4 = CFG_OR_TIMING_FLASH | (-size1 & 0xFFFF8000);
- memctl->memc_br4 = (CFG_FLASH_BASE4 & BR_BA_MSK) | (memctl->memc_br4 & ~(BR_BA_MSK));
+ /* Remap FLASH according to real size */
+ memctl->memc_or4 = CFG_OR_TIMING_FLASH | (-size1 & 0xFFFF8000);
+ memctl->memc_br4 = (CFG_FLASH_BASE4 & BR_BA_MSK) | (memctl->memc_br4 & ~(BR_BA_MSK));
- /* Re-do sizing to get full correct info */
- size1 = flash_get_size((vu_long *) CFG_FLASH_BASE4, &flash_info[1]);
+ /* Re-do sizing to get full correct info */
+ size1 = flash_get_size((vu_long *) CFG_FLASH_BASE4, &flash_info[1]);
- flash_get_offsets(CFG_FLASH_BASE4, &flash_info[1]);
+ flash_get_offsets(CFG_FLASH_BASE4, &flash_info[1]);
- size += size1;
+ size += size1;
+ } else
+ memctl->memc_br4 &= ~BR_V;
#endif
return (size);
diff --git a/board/netphone/phone_console.c b/board/netphone/phone_console.c
index c6a59af0c39..aa31ed3a70d 100644
--- a/board/netphone/phone_console.c
+++ b/board/netphone/phone_console.c
@@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -52,7 +52,7 @@
/*************************************************************************************************/
#define DISPLAY_BACKLIT_PORT ((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat
-#define DISPLAY_BACKLIT_MASK 0x0010
+#define DISPLAY_BACKLIT_MASK 0x0010
/*************************************************************************************************/
@@ -63,23 +63,23 @@
#define KP_IDLE_DELAY_HZ (CFG_HZ/2) /* key was released and idle */
#if CONFIG_NETPHONE_VERSION == 1
-#define KP_SPI_RXD_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
-#define KP_SPI_RXD_MASK 0x0008
+#define KP_SPI_RXD_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
+#define KP_SPI_RXD_MASK 0x0008
-#define KP_SPI_TXD_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
-#define KP_SPI_TXD_MASK 0x0004
+#define KP_SPI_TXD_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
+#define KP_SPI_TXD_MASK 0x0004
-#define KP_SPI_CLK_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
-#define KP_SPI_CLK_MASK 0x0001
+#define KP_SPI_CLK_PORT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
+#define KP_SPI_CLK_MASK 0x0001
#elif CONFIG_NETPHONE_VERSION == 2
-#define KP_SPI_RXD_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
-#define KP_SPI_RXD_MASK 0x00000008
+#define KP_SPI_RXD_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define KP_SPI_RXD_MASK 0x00000008
-#define KP_SPI_TXD_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
-#define KP_SPI_TXD_MASK 0x00000004
+#define KP_SPI_TXD_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define KP_SPI_TXD_MASK 0x00000004
-#define KP_SPI_CLK_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
-#define KP_SPI_CLK_MASK 0x00000002
+#define KP_SPI_CLK_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define KP_SPI_CLK_MASK 0x00000002
#endif
#define KP_CS_PORT (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat)
@@ -115,8 +115,8 @@
KP_CS_PORT &= ~KP_CS_MASK; \
} while(0)
-#define KP_ROWS 7
-#define KP_COLS 4
+#define KP_ROWS 7
+#define KP_COLS 4
#define KP_ROWS_MASK ((1 << KP_ROWS) - 1)
#define KP_COLS_MASK ((1 << KP_COLS) - 1)
@@ -124,29 +124,29 @@
#define SCAN 0
#define SCAN_FILTER 1
#define SCAN_COL 2
-#define SCAN_COL_FILTER 3
+#define SCAN_COL_FILTER 3
#define PRESSED 4
-#define KP_F1 0 /* leftmost dot (tab) */
-#define KP_F2 1 /* middle left dot */
-#define KP_F3 2 /* up */
-#define KP_F4 3 /* middle right dot */
-#define KP_F5 4 /* rightmost dot */
-#define KP_F6 5 /* C */
-#define KP_F7 6 /* left */
-#define KP_F8 7 /* down */
-#define KP_F9 8 /* right */
-#define KP_F10 9 /* enter */
-#define KP_F11 10 /* R */
-#define KP_F12 11 /* save */
-#define KP_F13 12 /* redial */
-#define KP_F14 13 /* speaker */
-#define KP_F15 14 /* unused */
-#define KP_F16 15 /* unused */
-
-#define KP_RELEASE -1 /* key depressed */
-#define KP_FORCE -2 /* key was pressed for more than force hz */
-#define KP_IDLE -3 /* key was released and idle */
+#define KP_F1 0 /* leftmost dot (tab) */
+#define KP_F2 1 /* middle left dot */
+#define KP_F3 2 /* up */
+#define KP_F4 3 /* middle right dot */
+#define KP_F5 4 /* rightmost dot */
+#define KP_F6 5 /* C */
+#define KP_F7 6 /* left */
+#define KP_F8 7 /* down */
+#define KP_F9 8 /* right */
+#define KP_F10 9 /* enter */
+#define KP_F11 10 /* R */
+#define KP_F12 11 /* save */
+#define KP_F13 12 /* redial */
+#define KP_F14 13 /* speaker */
+#define KP_F15 14 /* unused */
+#define KP_F16 15 /* unused */
+
+#define KP_RELEASE -1 /* key depressed */
+#define KP_FORCE -2 /* key was pressed for more than force hz */
+#define KP_IDLE -3 /* key was released and idle */
#define KP_1 '1'
#define KP_2 '2'
@@ -158,8 +158,8 @@
#define KP_8 '8'
#define KP_9 '9'
#define KP_0 '0'
-#define KP_STAR '*'
-#define KP_HASH '#'
+#define KP_STAR '*'
+#define KP_HASH '#'
/*************************************************************************************************/
@@ -198,7 +198,7 @@ static const char *whspace = " 0\n";
/* per mode character select (for 2-9) */
static const char *digits_sel[2][8] = {
{ /* small */
- "abc2", /* 2 */
+ "abc2", /* 2 */
"def3", /* 3 */
"ghi4", /* 4 */
"jkl5", /* 5 */
@@ -206,8 +206,8 @@ static const char *digits_sel[2][8] = {
"pqrs7", /* 7 */
"tuv8", /* 8 */
"wxyz9", /* 9 */
- }, { /* capital */
- "ABC2", /* 2 */
+ }, { /* capital */
+ "ABC2", /* 2 */
"DEF3", /* 3 */
"GHI4", /* 4 */
"JKL5", /* 5 */
@@ -810,10 +810,10 @@ static void ensure_visible(int col, int row, int dx, int dy)
/* move to easier to use vars */
- x1 = disp_col; y1 = disp_row;
+ x1 = disp_col; y1 = disp_row;
x2 = x1 + width; y2 = y1 + height;
- a1 = col; b1 = row;
- a2 = a1 + dx; b2 = b1 + dy;
+ a1 = col; b1 = row;
+ a2 = a1 + dx; b2 = b1 + dy;
/* printf("(%d,%d) - (%d,%d) : (%d, %d) - (%d, %d)\n", x1, y1, x2, y2, a1, b1, a2, b2); */
@@ -891,7 +891,7 @@ void phone_putc(const char c)
blink_time = BLINK_HZ;
switch (c) {
- case '\a': /* ignore bell */
+ case '\a': /* ignore bell */
case '\r': /* ignore carriage return */
break;
@@ -900,7 +900,7 @@ void phone_putc(const char c)
ensure_visible(curs_col, curs_row, 1, 1);
break;
- case 9: /* tab 8 */
+ case 9: /* tab 8 */
/* move to tab */
i = curs_col;
i |= 0x0008;
@@ -1006,13 +1006,13 @@ unsigned int kp_get_col_mask(unsigned int row_mask)
/**************************************************************************************/
static const int kp_scancodes[KP_ROWS * KP_COLS] = {
- KP_F1, KP_F3, KP_F4, KP_F2,
- KP_F6, KP_F8, KP_F9, KP_F7,
- KP_1, KP_3, KP_F11, KP_2,
- KP_4, KP_6, KP_F12, KP_5,
- KP_7, KP_9, KP_F13, KP_8,
+ KP_F1, KP_F3, KP_F4, KP_F2,
+ KP_F6, KP_F8, KP_F9, KP_F7,
+ KP_1, KP_3, KP_F11, KP_2,
+ KP_4, KP_6, KP_F12, KP_5,
+ KP_7, KP_9, KP_F13, KP_8,
KP_STAR, KP_HASH, KP_F14, KP_0,
- KP_F5, KP_F15, KP_F16, KP_F10,
+ KP_F5, KP_F15, KP_F16, KP_F10,
};
static const int kp_repeats[KP_ROWS * KP_COLS] = {
diff --git a/board/netta/Makefile b/board/netta/Makefile
index c89e4c58f13..68e24027a47 100644
--- a/board/netta/Makefile
+++ b/board/netta/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o flash.o dsp.o
+OBJS = $(BOARD).o flash.o dsp.o codec.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/netta/codec.c b/board/netta/codec.c
new file mode 100644
index 00000000000..fb2dab81379
--- /dev/null
+++ b/board/netta/codec.c
@@ -0,0 +1,1475 @@
+/*
+ * CODEC
+ */
+
+#include <common.h>
+#include <post.h>
+
+#include "mpc8xx.h"
+
+/***********************************************/
+
+#define MAX_DUSLIC 4
+
+#define NUM_CHANNELS 2
+#define MAX_SLICS (MAX_DUSLIC * NUM_CHANNELS)
+
+/***********************************************/
+
+#define SOP_READ_CH_0 0xC4 /* Read SOP Register for Channel A */
+#define SOP_READ_CH_1 0xCC /* Read SOP Register for Channel B */
+#define SOP_WRITE_CH_0 0x44 /* Write SOP Register for Channel A */
+#define SOP_WRITE_CH_1 0x4C /* Write SOP Register for Channel B */
+
+#define COP_READ_CH_0 0xC5
+#define COP_READ_CH_1 0xCD
+#define COP_WRITE_CH_0 0x45
+#define COP_WRITE_CH_1 0x4D
+
+#define POP_READ_CH_0 0xC6
+#define POP_READ_CH_1 0xCE
+#define POP_WRITE_CH_0 0x46
+#define POP_WRITE_CH_1 0x4E
+
+#define RST_CMD_DUSLIC_CHIP 0x40 /* OR 0x48 */
+#define RST_CMD_DUSLIC_CH_A 0x41
+#define RST_CMD_DUSLIC_CH_B 0x49
+
+#define PCM_RESYNC_CMD_CH_A 0x42
+#define PCM_RESYNC_CMD_CH_B 0x4A
+
+#define ACTIVE_HOOK_LEV_4 0
+#define ACTIVE_HOOK_LEV_12 1
+
+#define SLIC_P_NORMAL 0x01
+
+/************************************************/
+
+#define CODSP_WR 0x00
+#define CODSP_RD 0x80
+#define CODSP_OP 0x40
+#define CODSP_ADR(x) (((unsigned char)(x) & 7) << 3)
+#define CODSP_M(x) ((unsigned char)(x) & 7)
+#define CODSP_CMD(x) ((unsigned char)(x) & 7)
+
+/************************************************/
+
+/* command indication ops */
+#define CODSP_M_SLEEP_PWRDN 7
+#define CODSP_M_PWRDN_HIZ 0
+#define CODSP_M_ANY_ACT 2
+#define CODSP_M_RING 5
+#define CODSP_M_ACT_MET 6
+#define CODSP_M_GND_START 4
+#define CODSP_M_RING_PAUSE 1
+
+/* single byte commands */
+#define CODSP_CMD_SOFT_RESET CODSP_CMD(0)
+#define CODSP_CMD_RESET_CH CODSP_CMD(1)
+#define CODSP_CMD_RESYNC CODSP_CMD(2)
+
+/* two byte commands */
+#define CODSP_CMD_SOP CODSP_CMD(4)
+#define CODSP_CMD_COP CODSP_CMD(5)
+#define CODSP_CMD_POP CODSP_CMD(6)
+
+/************************************************/
+
+/* read as 4-bytes */
+#define CODSP_INTREG_INT_CH 0x80000000
+#define CODSP_INTREG_HOOK 0x40000000
+#define CODSP_INTREG_GNDK 0x20000000
+#define CODSP_INTREG_GNDP 0x10000000
+#define CODSP_INTREG_ICON 0x08000000
+#define CODSP_INTREG_VRTLIM 0x04000000
+#define CODSP_INTREG_OTEMP 0x02000000
+#define CODSP_INTREG_SYNC_FAIL 0x01000000
+#define CODSP_INTREG_LM_THRES 0x00800000
+#define CODSP_INTREG_READY 0x00400000
+#define CODSP_INTREG_RSTAT 0x00200000
+#define CODSP_INTREG_LM_OK 0x00100000
+#define CODSP_INTREG_IO4_DU 0x00080000
+#define CODSP_INTREG_IO3_DU 0x00040000
+#define CODSP_INTREG_IO2_DU 0x00020000
+#define CODSP_INTREG_IO1_DU 0x00010000
+#define CODSP_INTREG_DTMF_OK 0x00008000
+#define CODSP_INTREG_DTMF_KEY4 0x00004000
+#define CODSP_INTREG_DTMF_KEY3 0x00002000
+#define CODSP_INTREG_DTMF_KEY2 0x00001000
+#define CODSP_INTREG_DTMF_KEY1 0x00000800
+#define CODSP_INTREG_DTMF_KEY0 0x00000400
+#define CODSP_INTREG_UTDR_OK 0x00000200
+#define CODSP_INTREG_UTDX_OK 0x00000100
+#define CODSP_INTREG_EDSP_FAIL 0x00000080
+#define CODSP_INTREG_CIS_BOF 0x00000008
+#define CODSP_INTREG_CIS_BUF 0x00000004
+#define CODSP_INTREG_CIS_REQ 0x00000002
+#define CODSP_INTREG_CIS_ACT 0x00000001
+
+/************************************************/
+
+/* ======== SOP REG ADDRESSES =======*/
+
+#define REVISION_ADDR 0x00
+#define PCMC1_ADDR 0x05
+#define XCR_ADDR 0x06
+#define INTREG1_ADDR 0x07
+#define INTREG2_ADDR 0x08
+#define INTREG3_ADDR 0x09
+#define INTREG4_ADDR 0x0A
+#define LMRES1_ADDR 0x0D
+#define MASK_ADDR 0x11
+#define IOCTL3_ADDR 0x14
+#define BCR1_ADDR 0x15
+#define BCR2_ADDR 0x16
+#define BCR3_ADDR 0x17
+#define BCR4_ADDR 0x18
+#define BCR5_ADDR 0x19
+#define DSCR_ADDR 0x1A
+#define LMCR1_ADDR 0x1C
+#define LMCR2_ADDR 0x1D
+#define LMCR3_ADDR 0x1E
+#define OFR1_ADDR 0x1F
+#define PCMR1_ADDR 0x21
+#define PCMX1_ADDR 0x25
+#define TSTR3_ADDR 0x2B
+#define TSTR4_ADDR 0x2C
+#define TSTR5_ADDR 0x2D
+
+/* ========= POP REG ADDRESSES ========*/
+
+#define CIS_DAT_ADDR 0x00
+
+#define LEC_LEN_ADDR 0x3A
+#define LEC_POWR_ADDR 0x3B
+#define LEC_DELP_ADDR 0x3C
+#define LEC_DELQ_ADDR 0x3D
+#define LEC_GAIN_XI_ADDR 0x3E
+#define LEC_GAIN_RI_ADDR 0x3F
+#define LEC_GAIN_XO_ADDR 0x40
+#define LEC_RES_1_ADDR 0x41
+#define LEC_RES_2_ADDR 0x42
+
+#define NLP_POW_LPF_ADDR 0x30
+#define NLP_POW_LPS_ADDR 0x31
+#define NLP_BN_LEV_X_ADDR 0x32
+#define NLP_BN_LEV_R_ADDR 0x33
+#define NLP_BN_INC_ADDR 0x34
+#define NLP_BN_DEC_ADDR 0x35
+#define NLP_BN_MAX_ADDR 0x36
+#define NLP_BN_ADJ_ADDR 0x37
+#define NLP_RE_MIN_ERLL_ADDR 0x38
+#define NLP_RE_EST_ERLL_ADDR 0x39
+#define NLP_SD_LEV_X_ADDR 0x3A
+#define NLP_SD_LEV_R_ADDR 0x3B
+#define NLP_SD_LEV_BN_ADDR 0x3C
+#define NLP_SD_LEV_RE_ADDR 0x3D
+#define NLP_SD_OT_DT_ADDR 0x3E
+#define NLP_ERL_LIN_LP_ADDR 0x3F
+#define NLP_ERL_LEC_LP_ADDR 0x40
+#define NLP_CT_LEV_RE_ADDR 0x41
+#define NLP_CTRL_ADDR 0x42
+
+#define UTD_CF_H_ADDR 0x4B
+#define UTD_CF_L_ADDR 0x4C
+#define UTD_BW_H_ADDR 0x4D
+#define UTD_BW_L_ADDR 0x4E
+#define UTD_NLEV_ADDR 0x4F
+#define UTD_SLEV_H_ADDR 0x50
+#define UTD_SLEV_L_ADDR 0x51
+#define UTD_DELT_ADDR 0x52
+#define UTD_RBRK_ADDR 0x53
+#define UTD_RTIME_ADDR 0x54
+#define UTD_EBRK_ADDR 0x55
+#define UTD_ETIME_ADDR 0x56
+
+#define DTMF_LEV_ADDR 0x30
+#define DTMF_TWI_ADDR 0x31
+#define DTMF_NCF_H_ADDR 0x32
+#define DTMF_NCF_L_ADDR 0x33
+#define DTMF_NBW_H_ADDR 0x34
+#define DTMF_NBW_L_ADDR 0x35
+#define DTMF_GAIN_ADDR 0x36
+#define DTMF_RES1_ADDR 0x37
+#define DTMF_RES2_ADDR 0x38
+#define DTMF_RES3_ADDR 0x39
+
+#define CIS_LEV_H_ADDR 0x43
+#define CIS_LEV_L_ADDR 0x44
+#define CIS_BRS_ADDR 0x45
+#define CIS_SEIZ_H_ADDR 0x46
+#define CIS_SEIZ_L_ADDR 0x47
+#define CIS_MARK_H_ADDR 0x48
+#define CIS_MARK_L_ADDR 0x49
+#define CIS_LEC_MODE_ADDR 0x4A
+
+/*=====================================*/
+
+#define HOOK_LEV_ACT_START_ADDR 0x89
+#define RO1_START_ADDR 0x70
+#define RO2_START_ADDR 0x95
+#define RO3_START_ADDR 0x96
+
+#define TG1_FREQ_START_ADDR 0x38
+#define TG1_GAIN_START_ADDR 0x39
+#define TG1_BANDPASS_START_ADDR 0x3B
+#define TG1_BANDPASS_END_ADDR 0x3D
+
+#define TG2_FREQ_START_ADDR 0x40
+#define TG2_GAIN_START_ADDR 0x41
+#define TG2_BANDPASS_START_ADDR 0x43
+#define TG2_BANDPASS_END_ADDR 0x45
+
+/*====================================*/
+
+#define PCM_HW_B 0x80
+#define PCM_HW_A 0x00
+#define PCM_TIME_SLOT_0 0x00 /* Byte 0 of PCM Frame (by default is assigned to channel A ) */
+#define PCM_TIME_SLOT_1 0x01 /* Byte 1 of PCM Frame (by default is assigned to channel B ) */
+#define PCM_TIME_SLOT_4 0x04 /* Byte 4 of PCM Frame (Corresponds to B1 of the Second GCI ) */
+
+#define RX_LEV_ADDR 0x28
+#define TX_LEV_ADDR 0x30
+#define Ik1_ADDR 0x83
+
+#define AR_ROW 3 /* Is the row (AR Params) of the ac_Coeff array in SMS_CODEC_Defaults struct */
+#define AX_ROW 6 /* Is the row (AX Params) of the ac_Coeff array in SMS_CODEC_Defaults struct */
+#define DCF_ROW 0 /* Is the row (DCF Params) of the dc_Coeff array in SMS_CODEC_Defaults struct */
+
+/* Mark the start byte of Duslic parameters that we use with configurator */
+#define Ik1_START_BYTE 3
+#define RX_LEV_START_BYTE 0
+#define TX_LEV_START_BYTE 0
+
+/************************************************/
+
+#define INTREG4_CIS_ACT (1 << 0)
+
+#define BCR1_SLEEP 0x20
+#define BCR1_REVPOL 0x10
+#define BCR1_ACTR 0x08
+#define BCR1_ACTL 0x04
+#define BCR1_SLIC_MASK 0x03
+
+#define BCR2_HARD_POL_REV 0x40
+#define BCR2_TTX 0x20
+#define BCR2_TTX_12K 0x10
+#define BCR2_HIMAN 0x08
+#define BCR2_PDOT 0x01
+
+#define BCR3_PCMX_EN (1 << 4)
+
+#define BCR5_DTMF_EN (1 << 0)
+#define BCR5_DTMF_SRC (1 << 1)
+#define BCR5_LEC_EN (1 << 2)
+#define BCR5_LEC_OUT (1 << 3)
+#define BCR5_CIS_EN (1 << 4)
+#define BCR5_CIS_AUTO (1 << 5)
+#define BCR5_UTDX_EN (1 << 6)
+#define BCR5_UTDR_EN (1 << 7)
+
+#define DSCR_TG1_EN (1 << 0)
+#define DSCR_TG2_EN (1 << 1)
+#define DSCR_PTG (1 << 2)
+#define DSCR_COR8 (1 << 3)
+#define DSCR_DG_KEY(x) (((x) & 0x0F) << 4)
+
+#define CIS_LEC_MODE_CIS_V23 (1 << 0)
+#define CIS_LEC_MODE_CIS_FRM (1 << 1)
+#define CIS_LEC_MODE_NLP_EN (1 << 2)
+#define CIS_LEC_MODE_UTDR_SUM (1 << 4)
+#define CIS_LEC_MODE_UTDX_SUM (1 << 5)
+#define CIS_LEC_MODE_LEC_FREEZE (1 << 6)
+#define CIS_LEC_MODE_LEC_ADAPT (1 << 7)
+
+#define TSTR4_COR_64 (1 << 5)
+
+#define TSTR3_AC_DLB_8K (1 << 2)
+#define TSTR3_AC_DLB_32K (1 << 3)
+#define TSTR3_AC_DLB_4M (1 << 5)
+
+
+#define LMCR1_TEST_EN (1 << 7)
+#define LMCR1_LM_EN (1 << 6)
+#define LMCR1_LM_THM (1 << 5)
+#define LMCR1_LM_ONCE (1 << 2)
+#define LMCR1_LM_MASK (1 << 1)
+
+#define LMCR2_LM_RECT (1 << 5)
+#define LMCR2_LM_SEL_VDD 0x0D
+#define LMCR2_LM_SEL_IO3 0x0A
+#define LMCR2_LM_SEL_IO4 0x0B
+#define LMCR2_LM_SEL_IO4_MINUS_IO3 0x0F
+
+#define LMCR3_RTR_SEL (1 << 6)
+
+#define LMCR3_RNG_OFFSET_NONE 0x00
+#define LMCR3_RNG_OFFSET_1 0x01
+#define LMCR3_RNG_OFFSET_2 0x02
+#define LMCR3_RNG_OFFSET_3 0x03
+
+#define TSTR5_DC_HOLD (1 << 3)
+
+/************************************************/
+
+#define TARGET_ONHOOK_BATH_x100 4600 /* 46.0 Volt */
+#define TARGET_ONHOOK_BATL_x100 2500 /* 25.0 Volt */
+#define TARGET_V_DIVIDER_RATIO_x100 21376L /* (R1+R2)/R2 = 213.76 */
+#define DIVIDER_RATIO_ACCURx100 (22 * 100)
+#define V_AD_x10000 10834L /* VAD = 1.0834 */
+#define TARGET_VDDx100 330 /* VDD = 3.3 * 10 */
+#define VDD_MAX_DIFFx100 20 /* VDD Accur = 0.2*100 */
+
+#define RMS_MULTIPLIERx100 111 /* pi/(2xsqrt(2)) = 1.11*/
+#define K_INTDC_RECT_ON 4 /* When Rectifier is ON this value is necessary(2^4) */
+#define K_INTDC_RECT_OFF 2 /* 2^2 */
+#define RNG_FREQ 25
+#define SAMPLING_FREQ (2000L)
+#define N_SAMPLES (SAMPLING_FREQ/RNG_FREQ) /* for Ring Freq =25Hz (40ms Integration Period)[Sampling rate 2KHz -->1 Sample every 500us] */
+#define HOOK_THRESH_RING_START_ADDR 0x8B
+#define RING_PARAMS_START_ADDR 0x70
+
+#define V_OUT_BATH_MAX_DIFFx100 300 /* 3.0 x100 */
+#define V_OUT_BATL_MAX_DIFFx100 400 /* 4.0 x100 */
+#define MAX_V_RING_MEANx100 50
+#define TARGET_V_RING_RMSx100 2720
+#define V_RMS_RING_MAX_DIFFx100 250
+
+#define LM_OK_SRC_IRG_2 (1 << 4)
+
+/************************************************/
+
+#define PORTB (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat)
+#define PORTC (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat)
+#define PORTD (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
+
+#define _PORTD_SET(mask, state) \
+ do { \
+ if (state) \
+ PORTD |= mask; \
+ else \
+ PORTD &= ~mask; \
+ } while (0)
+
+#define _PORTB_SET(mask, state) \
+ do { \
+ if (state) \
+ PORTB |= mask; \
+ else \
+ PORTB &= ~mask; \
+ } while (0)
+
+#define _PORTB_TGL(mask) do { PORTB ^= mask; } while (0)
+#define _PORTB_GET(mask) (!!(PORTB & mask))
+
+#define _PORTC_GET(mask) (!!(PORTC & mask))
+
+/* port B */
+#define SPI_RXD (1 << (31 - 28))
+#define SPI_TXD (1 << (31 - 29))
+#define SPI_CLK (1 << (31 - 30))
+
+/* port C */
+#define COM_HOOK1 (1 << (15 - 9))
+#define COM_HOOK2 (1 << (15 - 10))
+
+#ifndef CONFIG_NETTA_SWAPHOOK
+
+#define COM_HOOK3 (1 << (15 - 11))
+#define COM_HOOK4 (1 << (15 - 12))
+
+#else
+
+#define COM_HOOK3 (1 << (15 - 12))
+#define COM_HOOK4 (1 << (15 - 11))
+
+#endif
+
+/* port D */
+#define SPIENC1 (1 << (15 - 9))
+#define SPIENC2 (1 << (15 - 10))
+#define SPIENC3 (1 << (15 - 11))
+#define SPIENC4 (1 << (15 - 14))
+
+#define SPI_DELAY() udelay(1)
+
+static inline unsigned int __SPI_Transfer(unsigned int tx)
+{
+ unsigned int rx;
+ int b;
+
+ rx = 0; b = 8;
+ while (--b >= 0) {
+ _PORTB_SET(SPI_TXD, tx & 0x80);
+ tx <<= 1;
+ _PORTB_TGL(SPI_CLK);
+ SPI_DELAY();
+ rx <<= 1;
+ rx |= _PORTB_GET(SPI_RXD);
+ _PORTB_TGL(SPI_CLK);
+ SPI_DELAY();
+ }
+
+ return rx;
+}
+
+static const char *codsp_dtmf_map = "D1234567890*#ABC";
+
+static const int spienc_mask_tab[4] = { SPIENC1, SPIENC2, SPIENC3, SPIENC4 };
+static const int com_hook_mask_tab[4] = { COM_HOOK1, COM_HOOK2, COM_HOOK3, COM_HOOK4 };
+
+static unsigned int codsp_send(int duslic_id, const unsigned char *cmd, int cmdlen, unsigned char *res, int reslen)
+{
+ unsigned int rx;
+ int i;
+
+ /* just some sanity checks */
+ if (cmd == 0 || cmdlen < 0)
+ return -1;
+
+ _PORTD_SET(spienc_mask_tab[duslic_id], 0);
+
+ /* first 2 bytes are without response */
+ i = 2;
+ while (i-- > 0 && cmdlen-- > 0)
+ __SPI_Transfer(*cmd++);
+
+ while (cmdlen-- > 0) {
+ rx = __SPI_Transfer(*cmd++);
+ if (res != 0 && reslen-- > 0)
+ *res++ = (unsigned char)rx;
+ }
+ if (res != 0) {
+ while (reslen-- > 0)
+ *res++ = __SPI_Transfer(0xFF);
+ }
+
+ _PORTD_SET(spienc_mask_tab[duslic_id], 1);
+
+ return 0;
+}
+
+/****************************************************************************/
+
+void codsp_set_ciop_m(int duslic_id, int channel, unsigned char m)
+{
+ unsigned char cmd = CODSP_WR | CODSP_ADR(channel) | CODSP_M(m);
+ codsp_send(duslic_id, &cmd, 1, 0, 0);
+}
+
+void codsp_reset_chip(int duslic_id)
+{
+ static const unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_CMD_SOFT_RESET;
+ codsp_send(duslic_id, &cmd, 1, 0, 0);
+}
+
+void codsp_reset_channel(int duslic_id, int channel)
+{
+ unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_RESET_CH;
+ codsp_send(duslic_id, &cmd, 1, 0, 0);
+}
+
+void codsp_resync_channel(int duslic_id, int channel)
+{
+ unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_RESYNC;
+ codsp_send(duslic_id, &cmd, 1, 0, 0);
+}
+
+/****************************************************************************/
+
+void codsp_write_sop_char(int duslic_id, int channel, unsigned char regno, unsigned char val)
+{
+ unsigned char cmd[3];
+
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
+ cmd[1] = regno;
+ cmd[2] = val;
+
+ codsp_send(duslic_id, cmd, 3, 0, 0);
+}
+
+void codsp_write_sop_short(int duslic_id, int channel, unsigned char regno, unsigned short val)
+{
+ unsigned char cmd[4];
+
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
+ cmd[1] = regno;
+ cmd[2] = (unsigned char)(val >> 8);
+ cmd[3] = (unsigned char)val;
+
+ codsp_send(duslic_id, cmd, 4, 0, 0);
+}
+
+void codsp_write_sop_int(int duslic_id, int channel, unsigned char regno, unsigned int val)
+{
+ unsigned char cmd[5];
+
+ cmd[0] = CODSP_WR | CODSP_ADR(channel) | CODSP_CMD_SOP;
+ cmd[1] = regno;
+ cmd[2] = (unsigned char)(val >> 24);
+ cmd[3] = (unsigned char)(val >> 16);
+ cmd[4] = (unsigned char)(val >> 8);
+ cmd[5] = (unsigned char)val;
+
+ codsp_send(duslic_id, cmd, 6, 0, 0);
+}
+
+unsigned char codsp_read_sop_char(int duslic_id, int channel, unsigned char regno)
+{
+ unsigned char cmd[3];
+ unsigned char res[2];
+
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
+ cmd[1] = regno;
+
+ codsp_send(duslic_id, cmd, 2, res, 2);
+
+ return res[1];
+}
+
+unsigned short codsp_read_sop_short(int duslic_id, int channel, unsigned char regno)
+{
+ unsigned char cmd[2];
+ unsigned char res[3];
+
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
+ cmd[1] = regno;
+
+ codsp_send(duslic_id, cmd, 2, res, 3);
+
+ return ((unsigned short)res[1] << 8) | res[2];
+}
+
+unsigned int codsp_read_sop_int(int duslic_id, int channel, unsigned char regno)
+{
+ unsigned char cmd[2];
+ unsigned char res[5];
+
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
+ cmd[1] = regno;
+
+ codsp_send(duslic_id, cmd, 2, res, 5);
+
+ return ((unsigned int)res[1] << 24) | ((unsigned int)res[2] << 16) | ((unsigned int)res[3] << 8) | res[4];
+}
+
+/****************************************************************************/
+
+void codsp_write_cop_block(int duslic_id, int channel, unsigned char addr, const unsigned char *block)
+{
+ unsigned char cmd[10];
+
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
+ cmd[1] = addr;
+ memcpy(cmd + 2, block, 8);
+ codsp_send(duslic_id, cmd, 10, 0, 0);
+}
+
+void codsp_write_cop_char(int duslic_id, int channel, unsigned char addr, unsigned char val)
+{
+ unsigned char cmd[3];
+
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
+ cmd[1] = addr;
+ cmd[2] = val;
+ codsp_send(duslic_id, cmd, 3, 0, 0);
+}
+
+void codsp_write_cop_short(int duslic_id, int channel, unsigned char addr, unsigned short val)
+{
+ unsigned char cmd[3];
+
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
+ cmd[1] = addr;
+ cmd[2] = (unsigned char)(val >> 8);
+ cmd[3] = (unsigned char)val;
+
+ codsp_send(duslic_id, cmd, 4, 0, 0);
+}
+
+void codsp_read_cop_block(int duslic_id, int channel, unsigned char addr, unsigned char *block)
+{
+ unsigned char cmd[2];
+ unsigned char res[9];
+
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
+ cmd[1] = addr;
+ codsp_send(duslic_id, cmd, 2, res, 9);
+ memcpy(block, res + 1, 8);
+}
+
+unsigned char codsp_read_cop_char(int duslic_id, int channel, unsigned char addr)
+{
+ unsigned char cmd[2];
+ unsigned char res[2];
+
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
+ cmd[1] = addr;
+ codsp_send(duslic_id, cmd, 2, res, 2);
+ return res[1];
+}
+
+unsigned short codsp_read_cop_short(int duslic_id, int channel, unsigned char addr)
+{
+ unsigned char cmd[2];
+ unsigned char res[3];
+
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
+ cmd[1] = addr;
+
+ codsp_send(duslic_id, cmd, 2, res, 3);
+
+ return ((unsigned short)res[1] << 8) | res[2];
+}
+
+/****************************************************************************/
+
+#define MAX_POP_BLOCK 50
+
+void codsp_write_pop_block(int duslic_id, int channel, unsigned char addr, const unsigned char *block, int len)
+{
+ unsigned char cmd[2 + MAX_POP_BLOCK];
+
+ if (len > MAX_POP_BLOCK) /* truncate */
+ len = MAX_POP_BLOCK;
+
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[1] = addr;
+ memcpy(cmd + 2, block, len);
+ codsp_send(duslic_id, cmd, 2 + len, 0, 0);
+}
+
+void codsp_write_pop_char(int duslic_id, int channel, unsigned char regno, unsigned char val)
+{
+ unsigned char cmd[3];
+
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[1] = regno;
+ cmd[2] = val;
+
+ codsp_send(duslic_id, cmd, 3, 0, 0);
+}
+
+void codsp_write_pop_short(int duslic_id, int channel, unsigned char regno, unsigned short val)
+{
+ unsigned char cmd[4];
+
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[1] = regno;
+ cmd[2] = (unsigned char)(val >> 8);
+ cmd[3] = (unsigned char)val;
+
+ codsp_send(duslic_id, cmd, 4, 0, 0);
+}
+
+void codsp_write_pop_int(int duslic_id, int channel, unsigned char regno, unsigned int val)
+{
+ unsigned char cmd[5];
+
+ cmd[0] = CODSP_WR | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[1] = regno;
+ cmd[2] = (unsigned char)(val >> 24);
+ cmd[3] = (unsigned char)(val >> 16);
+ cmd[4] = (unsigned char)(val >> 8);
+ cmd[5] = (unsigned char)val;
+
+ codsp_send(duslic_id, cmd, 6, 0, 0);
+}
+
+unsigned char codsp_read_pop_char(int duslic_id, int channel, unsigned char regno)
+{
+ unsigned char cmd[3];
+ unsigned char res[2];
+
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[1] = regno;
+
+ codsp_send(duslic_id, cmd, 2, res, 2);
+
+ return res[1];
+}
+
+unsigned short codsp_read_pop_short(int duslic_id, int channel, unsigned char regno)
+{
+ unsigned char cmd[2];
+ unsigned char res[3];
+
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[1] = regno;
+
+ codsp_send(duslic_id, cmd, 2, res, 3);
+
+ return ((unsigned short)res[1] << 8) | res[2];
+}
+
+unsigned int codsp_read_pop_int(int duslic_id, int channel, unsigned char regno)
+{
+ unsigned char cmd[2];
+ unsigned char res[5];
+
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[1] = regno;
+
+ codsp_send(duslic_id, cmd, 2, res, 5);
+
+ return ((unsigned int)res[1] << 24) | ((unsigned int)res[2] << 16) | ((unsigned int)res[3] << 8) | res[4];
+}
+
+/****************************************************************************/
+
+struct _coeffs {
+ unsigned char addr;
+ unsigned char values[8];
+};
+
+struct _coeffs ac_coeffs[11] = {
+ { 0x60, {0xAD,0xDA,0xB5,0x9B,0xC7,0x2A,0x9D,0x00} }, /* 0x60 IM-Filter part 1 */
+ { 0x68, {0x10,0x00,0xA9,0x82,0x0D,0x77,0x0A,0x00} }, /* 0x68 IM-Filter part 2 */
+ { 0x18, {0x08,0xC0,0xD2,0xAB,0xA5,0xE2,0xAB,0x07} }, /* 0x18 FRR-Filter */
+ { 0x28, {0x44,0x93,0xF5,0x92,0x88,0x00,0x00,0x00} }, /* 0x28 AR-Filter */
+ { 0x48, {0x96,0x38,0x29,0x96,0xC9,0x2B,0x8B,0x00} }, /* 0x48 LPR-Filter */
+ { 0x20, {0x08,0xB0,0xDA,0x9D,0xA7,0xFA,0x93,0x06} }, /* 0x20 FRX-Filter */
+ { 0x30, {0xBA,0xAC,0x00,0x01,0x85,0x50,0xC0,0x1A} }, /* 0x30 AX-Filter */
+ { 0x50, {0x96,0x38,0x29,0xF5,0xFA,0x2B,0x8B,0x00} }, /* 0x50 LPX-Filter */
+ { 0x00, {0x00,0x08,0x08,0x81,0x00,0x80,0x00,0x08} }, /* 0x00 TH-Filter part 1 */
+ { 0x08, {0x81,0x00,0x80,0x00,0xD7,0x33,0xBA,0x01} }, /* 0x08 TH-Filter part 2 */
+ { 0x10, {0xB3,0x6C,0xDC,0xA3,0xA4,0xE5,0x88,0x00} } /* 0x10 TH-Filter part 3 */
+};
+
+struct _coeffs ac_coeffs_0dB[11] = {
+ { 0x60, {0xAC,0x2A,0xB5,0x9A,0xB7,0x2A,0x9D,0x00} },
+ { 0x68, {0x10,0x00,0xA9,0x82,0x0D,0x83,0x0A,0x00} },
+ { 0x18, {0x08,0x20,0xD4,0xA4,0x65,0xEE,0x92,0x07} },
+ { 0x28, {0x2B,0xAB,0x36,0xA5,0x88,0x00,0x00,0x00} },
+ { 0x48, {0xAB,0xE9,0x4E,0x32,0xAB,0x25,0xA5,0x03} },
+ { 0x20, {0x08,0x20,0xDB,0x9C,0xA7,0xFA,0xB4,0x07} },
+ { 0x30, {0xF3,0x10,0x07,0x60,0x85,0x40,0xC0,0x1A} },
+ { 0x50, {0x96,0x38,0x29,0x97,0x39,0x19,0x8B,0x00} },
+ { 0x00, {0x00,0x08,0x08,0x81,0x00,0x80,0x00,0x08} },
+ { 0x08, {0x81,0x00,0x80,0x00,0x47,0x3C,0xD2,0x01} },
+ { 0x10, {0x62,0xDB,0x4A,0x87,0x73,0x28,0x88,0x00} }
+};
+
+struct _coeffs dc_coeffs[9] = {
+ { 0x80, {0x25,0x59,0x9C,0x23,0x24,0x23,0x32,0x1C} }, /* 0x80 DC-Parameter */
+ { 0x70, {0x90,0x30,0x1B,0xC0,0x33,0x43,0xAC,0x02} }, /* 0x70 Ringing */
+ { 0x90, {0x3F,0xC3,0x2E,0x3A,0x80,0x90,0x00,0x09} }, /* 0x90 LP-Filters */
+ { 0x88, {0xAF,0x80,0x27,0x7B,0x01,0x4C,0x7B,0x02} }, /* 0x88 Hook Levels */
+ { 0x78, {0x00,0xC0,0x6D,0x7A,0xB3,0x78,0x89,0x00} }, /* 0x78 Ramp Generator */
+ { 0x58, {0xA5,0x44,0x34,0xDB,0x0E,0xA2,0x2A,0x00} }, /* 0x58 TTX */
+ { 0x38, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x38 TG1 */
+ { 0x40, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x40 TG2 */
+ { 0x98, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00} } /* 0x98 Reserved */
+};
+
+void program_coeffs(int duslic_id, int channel, struct _coeffs *coeffs, int tab_size)
+{
+ int i;
+
+ for (i = 0; i < tab_size; i++)
+ codsp_write_cop_block(duslic_id, channel, coeffs[i].addr, coeffs[i].values);
+}
+
+#define SS_OPEN_CIRCUIT 0
+#define SS_RING_PAUSE 1
+#define SS_ACTIVE 2
+#define SS_ACTIVE_HIGH 3
+#define SS_ACTIVE_RING 4
+#define SS_RINGING 5
+#define SS_ACTIVE_WITH_METERING 6
+#define SS_ONHOOKTRNSM 7
+#define SS_STANDBY 8
+#define SS_MAX 8
+
+static void codsp_set_slic(int duslic_id, int channel, int state)
+{
+ unsigned char v;
+
+ v = codsp_read_sop_char(duslic_id, channel, BCR1_ADDR);
+
+ switch (state) {
+
+ case SS_ACTIVE:
+ codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, (v & ~BCR1_ACTR) | BCR1_ACTL);
+ codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT);
+ break;
+
+ case SS_ACTIVE_HIGH:
+ codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, v & ~(BCR1_ACTR | BCR1_ACTL));
+ codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT);
+ break;
+
+ case SS_ACTIVE_RING:
+ case SS_ONHOOKTRNSM:
+ codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, (v & ~BCR1_ACTL) | BCR1_ACTR);
+ codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT);
+ break;
+
+ case SS_STANDBY:
+ codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, v & ~(BCR1_ACTL | BCR1_ACTR));
+ codsp_set_ciop_m(duslic_id, channel, CODSP_M_SLEEP_PWRDN);
+ break;
+
+ case SS_OPEN_CIRCUIT:
+ codsp_set_ciop_m(duslic_id, channel, CODSP_M_PWRDN_HIZ);
+ break;
+
+ case SS_RINGING:
+ codsp_set_ciop_m(duslic_id, channel, CODSP_M_RING);
+ break;
+
+ case SS_RING_PAUSE:
+ codsp_set_ciop_m(duslic_id, channel, CODSP_M_RING_PAUSE);
+ break;
+ }
+}
+
+const unsigned char Ring_Sin_28Vrms_25Hz[8] = { 0x90, 0x30, 0x1B, 0xC0, 0xC3, 0x9C, 0x88, 0x00 };
+const unsigned char Max_HookRingTh[3] = { 0x7B, 0x41, 0x62 };
+
+void retrieve_slic_state(int slic_id)
+{
+ int duslic_id = slic_id >> 1;
+ int channel = slic_id & 1;
+
+ /* Retrieve the state of the SLICs */
+ codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00);
+
+ /* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */
+ udelay(10000);
+
+ codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
+ codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH);
+ codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, 0x40);
+
+ /* Program Default Hook Ring thresholds */
+ codsp_write_cop_block(duslic_id, channel, dc_coeffs[1].addr, dc_coeffs[1].values);
+
+ /* Now program Hook Threshold while Ring and ac RingTrip to max values */
+ codsp_write_cop_block(duslic_id, channel, dc_coeffs[3].addr, dc_coeffs[3].values);
+
+ codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000);
+
+ udelay(40000);
+}
+
+int wait_level_metering_finish(int duslic_id, int channel)
+{
+ int cnt;
+
+ for (cnt = 0; cnt < 1000 &&
+ (codsp_read_sop_char(duslic_id, channel, INTREG2_ADDR) & LM_OK_SRC_IRG_2) == 0; cnt++) { }
+
+ return cnt != 1000;
+}
+
+int measure_on_hook_voltages(int slic_id, long *vdd,
+ long *v_oh_H, long *v_oh_L, long *ring_mean_v, long *ring_rms_v)
+{
+ short LM_Result, Offset_Compensation; /* Signed 16 bit */
+ long int VDD, VDD_diff, V_in, V_out, Divider_Ratio, Vout_diff ;
+ unsigned char err_mask = 0;
+ int duslic_id = slic_id >> 1;
+ int channel = slic_id & 1;
+ int i;
+
+ /* measure VDD */
+ /* Now select the VDD level Measurement (but first of all Hold the DC characteristic) */
+ codsp_write_sop_char(duslic_id, channel, TSTR5_ADDR, TSTR5_DC_HOLD);
+
+ /* Activate Test Mode ==> To Enable DC Hold !!! */
+ /* (else the LMRES is treated as Feeding Current and the Feeding voltage changes */
+ /* imediatelly (after 500us when the LMRES Registers is updated for the first time after selection of (IO4-IO3) measurement !!!!))*/
+ codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_TEST_EN | LMCR1_LM_THM | LMCR1_LM_MASK);
+
+ udelay(40000);
+
+ /* Now I Can select what to measure by DC Level Meter (select IO4-IO3) */
+ codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_VDD);
+
+ /* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */
+ udelay(10000);
+
+ /* Now Read the LM Result Registers */
+ LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
+ VDD = (-1)*((((long int)LM_Result) * 390L ) >> 15) ; /* VDDx100 */
+
+ *vdd = VDD;
+
+ VDD_diff = VDD - TARGET_VDDx100;
+
+ if (VDD_diff < 0)
+ VDD_diff = -VDD_diff;
+
+ if (VDD_diff > VDD_MAX_DIFFx100)
+ err_mask |= 1;
+
+ Divider_Ratio = TARGET_V_DIVIDER_RATIO_x100;
+
+ codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00);
+ codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
+
+ codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH); /* Go back to ONHOOK Voltage */
+
+ udelay(40000);
+
+ codsp_write_sop_char(duslic_id, channel,
+ LMCR1_ADDR, LMCR1_TEST_EN | LMCR1_LM_THM | LMCR1_LM_MASK);
+
+ udelay(40000);
+
+ /* Now I Can select what to measure by DC Level Meter (select IO4-IO3) */
+ codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_IO4_MINUS_IO3);
+
+ /* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */
+ udelay(10000);
+
+ /* Now Read the LM Result Registers */
+ LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
+ V_in = (-1)* ((((long int)LM_Result) * V_AD_x10000 ) >> 15) ; /* Vin x 10000*/
+
+ V_out = (V_in * Divider_Ratio) / 10000L ; /* Vout x100 */
+
+ *v_oh_H = V_out;
+
+ Vout_diff = V_out - TARGET_ONHOOK_BATH_x100;
+
+ if (Vout_diff < 0)
+ Vout_diff = -Vout_diff;
+
+ if (Vout_diff > V_OUT_BATH_MAX_DIFFx100)
+ err_mask |= 2;
+
+ codsp_set_slic(duslic_id, channel, SS_ACTIVE); /* Go back to ONHOOK Voltage */
+
+ udelay(40000);
+
+ /* Now Read the LM Result Registers */
+ LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
+
+ V_in = (-1)* ((((long int)LM_Result) * V_AD_x10000 ) >> 15) ; /* Vin x 10000*/
+
+ V_out = (V_in * Divider_Ratio) / 10000L ; /* Vout x100 */
+
+ *v_oh_L = V_out;
+
+ Vout_diff = V_out - TARGET_ONHOOK_BATL_x100;
+
+ if (Vout_diff < 0)
+ Vout_diff = -Vout_diff;
+
+ if (Vout_diff > V_OUT_BATL_MAX_DIFFx100)
+ err_mask |= 4;
+
+ /* perform ring tests */
+
+ codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00);
+ codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
+
+ udelay(40000);
+
+ codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, LMCR3_RTR_SEL | LMCR3_RNG_OFFSET_NONE);
+
+ /* Now program RO1 =0V , Ring Amplitude and frequency and shift factor K = 1 (LMDC=0x0088)*/
+ codsp_write_cop_block(duslic_id, channel, RING_PARAMS_START_ADDR, Ring_Sin_28Vrms_25Hz);
+
+ /* By Default RO1 is selected when ringing RNG-OFFSET = 00 */
+
+ /* Now program Hook Threshold while Ring and ac RingTrip to max values */
+ for(i = 0; i < sizeof(Max_HookRingTh); i++)
+ codsp_write_cop_char(duslic_id, channel, HOOK_THRESH_RING_START_ADDR + i, Max_HookRingTh[i]);
+
+ codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000);
+
+ codsp_set_slic(duslic_id, channel, SS_RING_PAUSE); /* Start Ringing */
+
+ /* select source for the levelmeter to be IO4-IO3 */
+ codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_IO4_MINUS_IO3);
+
+ udelay(40000);
+
+ /* Before Enabling Level Meter Programm the apropriate shift factor K_INTDC=(4 if Rectifier Enabled and 2 if Rectifier Disabled) */
+ codsp_write_cop_char(duslic_id, channel, RING_PARAMS_START_ADDR + 7, K_INTDC_RECT_OFF);
+
+ udelay(10000);
+
+ /* Enable LevelMeter to Integrate only once (Rectifier Disabled) */
+ codsp_write_sop_char(duslic_id, channel,
+ LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
+
+ udelay(40000); /* Integration Period == Ring Period = 40ms (for 25Hz Ring) */
+
+ if (wait_level_metering_finish(duslic_id, channel)) {
+
+ udelay(10000); /* To be sure that Integration Results are Valid wait at least 500us !!! */
+
+ /* Now Read the LM Result Registers (Will be valid until LM_EN becomes zero again( after that the Result is updated every 500us) ) */
+ Offset_Compensation = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
+ Offset_Compensation = (-1) * ((Offset_Compensation * (1 << K_INTDC_RECT_OFF)) / N_SAMPLES);
+
+ /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
+ codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE);
+
+ /* Now programm Integrator Offset Registers !!! */
+ codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, Offset_Compensation);
+
+ codsp_set_slic(duslic_id, channel, SS_RINGING); /* Start Ringing */
+
+ udelay(40000);
+
+ /* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */
+ codsp_write_sop_char(duslic_id, channel,
+ LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
+
+ udelay(40000); /* Integration Period == Ring Period = 40ms (for 25Hz Ring) */
+
+ /* Poll the LM_OK bit to see when Integration Result is Ready */
+ if (wait_level_metering_finish(duslic_id, channel)) {
+
+ udelay(10000); /* wait at least 500us to be sure that the Integration Result are valid !!! */
+
+ /* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
+ /* ==>After that Result Regs will be updated every 500us !!!) */
+ LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
+ V_in = (-1) * ( ( (((long int)LM_Result) * V_AD_x10000) / N_SAMPLES) >> (15 - K_INTDC_RECT_OFF)) ; /* Vin x 10000*/
+
+ V_out = (V_in * Divider_Ratio) / 10000L ; /* Vout x100 */
+
+ if (V_out < 0)
+ V_out= -V_out;
+
+ if (V_out > MAX_V_RING_MEANx100)
+ err_mask |= 8;
+
+ *ring_mean_v = V_out;
+ } else {
+ err_mask |= 8;
+ *ring_mean_v = 0;
+ }
+ } else {
+ err_mask |= 8;
+ *ring_mean_v = 0;
+ }
+
+ /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
+ codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR,
+ LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE);
+ codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000);
+
+ codsp_set_slic(duslic_id, channel, SS_RING_PAUSE); /* Start Ringing */
+
+ /* Now Enable Rectifier */
+ /* select source for the levelmeter to be IO4-IO3 */
+ codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR,
+ LMCR2_LM_SEL_IO4_MINUS_IO3 | LMCR2_LM_RECT);
+
+ /* Program the apropriate shift factor K_INTDC (in order to avoid Overflow at Integtation Result !!!) */
+ codsp_write_cop_char(duslic_id, channel, RING_PARAMS_START_ADDR + 7, K_INTDC_RECT_ON);
+
+ udelay(40000);
+
+ /* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */
+ codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR,
+ LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
+
+ udelay(40000);
+
+ /* Poll the LM_OK bit to see when Integration Result is Ready */
+ if (wait_level_metering_finish(duslic_id, channel)) {
+
+ udelay(10000);
+
+ /* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
+ /* ==>After that Result Regs will be updated every 500us !!!) */
+ Offset_Compensation = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
+ Offset_Compensation = (-1) * ((Offset_Compensation * (1 << K_INTDC_RECT_ON)) / N_SAMPLES);
+
+ /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
+ codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE);
+
+ /* Now programm Integrator Offset Registers !!! */
+ codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, Offset_Compensation);
+
+ /* Be sure that a Ring is generated !!!! */
+ codsp_set_slic(duslic_id, channel, SS_RINGING); /* Start Ringing again */
+
+ udelay(40000);
+
+ /* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */
+ codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR,
+ LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
+
+ udelay(40000);
+
+ /* Poll the LM_OK bit to see when Integration Result is Ready */
+ if (wait_level_metering_finish(duslic_id, channel)) {
+
+ udelay(10000);
+
+ /* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
+ /* ==>After that Result Regs will be updated every 500us !!!) */
+ LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
+ V_in = (-1) * ( ( (((long int)LM_Result) * V_AD_x10000) / N_SAMPLES) >> (15 - K_INTDC_RECT_ON) ) ; /* Vin x 10000*/
+
+ V_out = (((V_in * Divider_Ratio) / 10000L) * RMS_MULTIPLIERx100) / 100 ; /* Vout_RMS x100 */
+ if (V_out < 0)
+ V_out = -V_out;
+
+ Vout_diff = (V_out - TARGET_V_RING_RMSx100);
+
+ if (Vout_diff < 0)
+ Vout_diff = -Vout_diff;
+
+ if (Vout_diff > V_RMS_RING_MAX_DIFFx100)
+ err_mask |= 16;
+
+ *ring_rms_v = V_out;
+ } else {
+ err_mask |= 16;
+ *ring_rms_v = 0;
+ }
+ } else {
+ err_mask |= 16;
+ *ring_rms_v = 0;
+ }
+ /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
+ codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
+
+ retrieve_slic_state(slic_id);
+
+ return(err_mask);
+}
+
+int test_dtmf(int slic_id)
+{
+ unsigned char code;
+ unsigned char b;
+ unsigned int intreg;
+ int duslic_id = slic_id >> 1;
+ int channel = slic_id & 1;
+
+ for (code = 0; code < 16; code++) {
+ b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR);
+ codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
+ (b & ~(DSCR_PTG | DSCR_DG_KEY(15))) | DSCR_DG_KEY(code) | DSCR_TG1_EN | DSCR_TG2_EN);
+ udelay(80000);
+
+ intreg = codsp_read_sop_int(duslic_id, channel, INTREG1_ADDR);
+ if ((intreg & CODSP_INTREG_INT_CH) == 0)
+ break;
+
+ if ((intreg & CODSP_INTREG_DTMF_OK) == 0 ||
+ codsp_dtmf_map[(intreg >> 10) & 15] != codsp_dtmf_map[code])
+ break;
+
+ b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR);
+ codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
+ b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN));
+
+ udelay(80000);
+
+ intreg = codsp_read_sop_int(duslic_id, channel, INTREG1_ADDR); /* for dtmf_pause irq */
+ }
+
+ if (code != 16) {
+ b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR); /* stop dtmf */
+ codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
+ b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN));
+ return(1);
+ }
+
+ return(0);
+}
+
+void data_up_persist_time(int duslic_id, int channel, int time_ms)
+{
+ unsigned char b;
+
+ b = codsp_read_sop_char(duslic_id, channel, IOCTL3_ADDR);
+ b = (b & 0x0F) | ((time_ms & 0x0F) << 4);
+ codsp_write_sop_char(duslic_id, channel, IOCTL3_ADDR, b);
+}
+
+static void program_dtmf_params(int duslic_id, int channel)
+{
+ unsigned char b;
+
+ codsp_write_pop_char(duslic_id, channel, DTMF_LEV_ADDR, 0x10);
+ codsp_write_pop_char(duslic_id, channel, DTMF_TWI_ADDR, 0x0C);
+ codsp_write_pop_char(duslic_id, channel, DTMF_NCF_H_ADDR, 0x79);
+ codsp_write_pop_char(duslic_id, channel, DTMF_NCF_L_ADDR, 0x10);
+ codsp_write_pop_char(duslic_id, channel, DTMF_NBW_H_ADDR, 0x02);
+ codsp_write_pop_char(duslic_id, channel, DTMF_NBW_L_ADDR, 0xFB);
+ codsp_write_pop_char(duslic_id, channel, DTMF_GAIN_ADDR, 0x91);
+ codsp_write_pop_char(duslic_id, channel, DTMF_RES1_ADDR, 0x00);
+ codsp_write_pop_char(duslic_id, channel, DTMF_RES2_ADDR, 0x00);
+ codsp_write_pop_char(duslic_id, channel, DTMF_RES3_ADDR, 0x00);
+
+ b = codsp_read_sop_char(duslic_id, channel, BCR5_ADDR);
+ codsp_write_sop_char(duslic_id, channel, BCR5_ADDR, b | BCR5_DTMF_EN);
+}
+
+static void codsp_channel_full_reset(int duslic_id, int channel)
+{
+
+ program_coeffs(duslic_id, channel, ac_coeffs, sizeof(ac_coeffs) / sizeof(struct _coeffs));
+ program_coeffs(duslic_id, channel, dc_coeffs, sizeof(dc_coeffs) / sizeof(struct _coeffs));
+
+ /* program basic configuration registers */
+ codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, 0x01);
+ codsp_write_sop_char(duslic_id, channel, BCR2_ADDR, 0x41);
+ codsp_write_sop_char(duslic_id, channel, BCR3_ADDR, 0x43);
+ codsp_write_sop_char(duslic_id, channel, BCR4_ADDR, 0x00);
+ codsp_write_sop_char(duslic_id, channel, BCR5_ADDR, 0x00);
+
+ codsp_write_sop_char(duslic_id, channel, DSCR_ADDR, 0x04); /* PG */
+
+ program_dtmf_params(duslic_id, channel);
+
+ codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, 0x40); /* RingTRip_SEL */
+
+ data_up_persist_time(duslic_id, channel, 4);
+
+ codsp_write_sop_char(duslic_id, channel, MASK_ADDR, 0xFF); /* All interrupts masked */
+
+ codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH);
+}
+
+static int codsp_chip_full_reset(int duslic_id)
+{
+ int i, cnt;
+ int intreg[NUM_CHANNELS];
+ unsigned char pcm_resync;
+ unsigned char revision;
+
+ codsp_reset_chip(duslic_id);
+
+ udelay(2000);
+
+ for (i = 0; i < NUM_CHANNELS; i++)
+ intreg[i] = codsp_read_sop_int(duslic_id, i, INTREG1_ADDR);
+
+ udelay(1500);
+
+ if (_PORTC_GET(com_hook_mask_tab[duslic_id]) == 0) {
+ printf("_HOOK(%d) stayed low\n", duslic_id);
+ return -1;
+ }
+
+ for (pcm_resync = 0, i = 0; i < NUM_CHANNELS; i++) {
+ if (intreg[i] & CODSP_INTREG_SYNC_FAIL)
+ pcm_resync |= 1 << i;
+ }
+
+ for (cnt = 0; cnt < 5 && pcm_resync; cnt++) {
+ for (i = 0; i < NUM_CHANNELS; i++)
+ codsp_resync_channel(duslic_id, i);
+
+ udelay(2000);
+
+ pcm_resync = 0;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (codsp_read_sop_int(duslic_id, i, INTREG1_ADDR) & CODSP_INTREG_SYNC_FAIL)
+ pcm_resync |= 1 << i;
+ }
+ }
+
+ if (cnt == 5) {
+ printf("PCM_Resync(%u) not completed\n", duslic_id);
+ return -2;
+ }
+
+ revision = codsp_read_sop_char(duslic_id, 0, REVISION_ADDR);
+ printf("DuSLIC#%d hardware version %d.%d\r\n", duslic_id, (revision & 0xF0) >> 4, revision & 0x0F);
+
+ codsp_write_sop_char(duslic_id, 0, XCR_ADDR, 0x80); /* EDSP_EN */
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ codsp_write_sop_char(duslic_id, i, PCMC1_ADDR, 0x01);
+ codsp_channel_full_reset(duslic_id, i);
+ }
+
+ return 0;
+}
+
+int slic_self_test(int duslic_mask)
+{
+ int slic;
+ int i;
+ int r;
+ long vdd, v_oh_H, v_oh_L, ring_mean_v, ring_rms_v;
+ const char *err_txt[] = { "VDD", "V_OH_H", "V_OH_L", "V_RING_MEAN", "V_RING_RMS" };
+ int error = 0;
+
+ for (slic = 0; slic < MAX_SLICS; slic++) { /* voltages self test */
+ if (duslic_mask & (1 << (slic >> 1))) {
+ r = measure_on_hook_voltages(slic, &vdd,
+ &v_oh_H, &v_oh_L, &ring_mean_v, &ring_rms_v);
+
+ printf("SLIC %u measured voltages (x100):\n\t"
+ "VDD = %ld\tV_OH_H = %ld\tV_OH_L = %ld\tV_RING_MEAN = %ld\tV_RING_RMS = %ld\n",
+ slic, vdd, v_oh_H, v_oh_L, ring_mean_v, ring_rms_v);
+
+ if (r != 0)
+ error |= 1 << slic;
+
+ for (i = 0; i < 5; i++)
+ if (r & (1 << i))
+ printf("\t%s out of range\n", err_txt[i]);
+ }
+ }
+
+ for (slic = 0; slic < MAX_SLICS; slic++) { /* voice path self test */
+ if (duslic_mask & (1 << (slic >> 1))) {
+ printf("SLIC %u VOICE PATH...CHECKING", slic);
+ printf("\rSLIC %u VOICE PATH...%s\n", slic,
+ (r = test_dtmf(slic)) != 0 ? "FAILED " : "PASSED ");
+
+ if (r != 0)
+ error |= 1 << slic;
+ }
+ }
+
+ return(error);
+}
+
+#if defined(CONFIG_NETTA_ISDN)
+
+#define SPIENS1 (1 << (31 - 15))
+#define SPIENS2 (1 << (31 - 19))
+
+static const int spiens_mask_tab[2] = { SPIENS1, SPIENS2 };
+int s_initialized = 0;
+
+static inline unsigned int s_transfer_internal(int s_id, unsigned int address, unsigned int value)
+{
+ unsigned int rx, v;
+
+ _PORTB_SET(spiens_mask_tab[s_id], 0);
+
+ rx = __SPI_Transfer(address);
+
+ switch (address & 0xF0) {
+ case 0x60: /* write byte register */
+ case 0x70:
+ rx = __SPI_Transfer(value);
+ break;
+
+ case 0xE0: /* read R6 register */
+ v = __SPI_Transfer(0);
+
+ rx = (rx << 8) | v;
+
+ break;
+
+ case 0xF0: /* read byte register */
+ rx = __SPI_Transfer(0);
+
+ break;
+ }
+
+ _PORTB_SET(spiens_mask_tab[s_id], 1);
+
+ return rx;
+}
+
+static void s_write_BR(int s_id, unsigned int regno, unsigned int val)
+{
+ unsigned int address;
+ unsigned int v;
+
+ address = 0x70 | (regno & 15);
+ val &= 0xff;
+
+ v = s_transfer_internal(s_id, address, val);
+}
+
+static void s_write_OR(int s_id, unsigned int regno, unsigned int val)
+{
+ unsigned int address;
+ unsigned int v;
+
+ address = 0x70 | (regno & 15);
+ val &= 0xff;
+
+ v = s_transfer_internal(s_id, address, val);
+}
+
+static void s_write_NR(int s_id, unsigned int regno, unsigned int val)
+{
+ unsigned int address;
+ unsigned int v;
+
+ address = (regno & 7) << 4;
+ val &= 0xf;
+
+ v = s_transfer_internal(s_id, address | val, 0x00);
+}
+
+#define BR7_IFR 0x08 /* IDL2 free run */
+#define BR7_ICSLSB 0x04 /* IDL2 clock speed LSB */
+
+#define BR15_OVRL_REG_EN 0x80
+#define OR7_D3VR 0x80 /* disable 3V regulator */
+
+#define OR8_TEME 0x10 /* TE mode enable */
+#define OR8_MME 0x08 /* master mode enable */
+
+void s_initialize(void)
+{
+ int s_id;
+
+ for (s_id = 0; s_id < 2; s_id++) {
+ s_write_BR(s_id, 7, BR7_IFR | BR7_ICSLSB);
+ s_write_BR(s_id, 15, BR15_OVRL_REG_EN);
+ s_write_OR(s_id, 8, OR8_TEME | OR8_MME);
+ s_write_OR(s_id, 7, OR7_D3VR);
+ s_write_OR(s_id, 6, 0);
+ s_write_BR(s_id, 15, 0);
+ s_write_NR(s_id, 3, 0);
+ }
+}
+
+#endif
+
+int board_post_codec(int flags)
+{
+ int j;
+ int r;
+ int duslic_mask;
+
+ printf("board_post_dsp\n");
+
+#if defined(CONFIG_NETTA_ISDN)
+ if (s_initialized == 0) {
+ s_initialize();
+ s_initialized = 1;
+
+ printf("s_initialized\n");
+
+ udelay(20000);
+ }
+#endif
+ duslic_mask = 0;
+
+ for (j = 0; j < MAX_DUSLIC; j++) {
+ if (codsp_chip_full_reset(j) < 0)
+ printf("Error initializing DuSLIC#%d\n", j);
+ else
+ duslic_mask |= 1 << j;
+ }
+
+ if (duslic_mask != 0) {
+ printf("Testing SLICs...\n");
+
+ r = slic_self_test(duslic_mask);
+ for (j = 0; j < MAX_SLICS; j++) {
+ if (duslic_mask & (1 << (j >> 1)))
+ printf("SLIC %u...%s\n", j, r & (1 << j) ? "FAULTY" : "OK");
+ }
+ }
+ printf("DuSLIC self test finished\n");
+
+ return 0; /* return -1 on error */
+}
diff --git a/board/netta/dsp.c b/board/netta/dsp.c
index 2bea3adeae3..66e0b85e6c6 100644
--- a/board/netta/dsp.c
+++ b/board/netta/dsp.c
@@ -1,5 +1,5 @@
/*
- * Intracom TI6711 DSP
+ * Intracom TI6711/TI6412 DSP
*/
#include <common.h>
@@ -12,6 +12,38 @@ struct ram_range {
u32 size;
};
+#if defined(CONFIG_NETTA_6412)
+
+static const struct ram_range int_ram[] = {
+ { 0x00000000U, 0x00040000U },
+};
+
+static const struct ram_range ext_ram[] = {
+ { 0x80000000U, 0x00100000U },
+};
+
+static const struct ram_range ranges[] = {
+ { 0x00000000U, 0x00040000U },
+ { 0x80000000U, 0x00100000U },
+};
+
+static inline u16 bit_invert(u16 d)
+{
+ register u8 i;
+ register u16 r;
+ register u16 bit;
+
+ r = 0;
+ for (i = 0; i < 16; i++) {
+ bit = d & (1 << i);
+ if (bit != 0)
+ r |= 1 << (15 - i);
+ }
+ return r;
+}
+
+#else
+
static const struct ram_range int_ram[] = {
{ 0x00000000U, 0x00010000U },
};
@@ -25,6 +57,8 @@ static const struct ram_range ranges[] = {
{ 0x80000000U, 0x00100000U },
};
+#endif
+
/*******************************************************************************************************/
static inline int addr_in_int_ram(u32 addr)
@@ -62,8 +96,11 @@ static volatile u32 *ti6711_delay = &dummy_delay;
static inline void dsp_go_slow(void)
{
volatile memctl8xx_t *memctl = &((immap_t *)CFG_IMMR)->im_memctl;
-
+#if defined(CONFIG_NETTA_6412)
+ memctl->memc_or6 |= OR_SCY_15_CLK | OR_TRLX;
+#else
memctl->memc_or2 |= OR_SCY_15_CLK | OR_TRLX;
+#endif
memctl->memc_or5 |= OR_SCY_15_CLK | OR_TRLX;
ti6711_delay = (u32 *)DUMMY_BASE;
@@ -72,8 +109,11 @@ static inline void dsp_go_slow(void)
static inline void dsp_go_fast(void)
{
volatile memctl8xx_t *memctl = &((immap_t *)CFG_IMMR)->im_memctl;
-
+#if defined(CONFIG_NETTA_6412)
+ memctl->memc_or6 = (memctl->memc_or6 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_0_CLK;
+#else
memctl->memc_or2 = (memctl->memc_or2 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_3_CLK;
+#endif
memctl->memc_or5 = (memctl->memc_or5 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_0_CLK;
ti6711_delay = &dummy_delay;
@@ -89,62 +129,50 @@ static inline void dsp_delay(void)
static inline u16 dsp_read_hpic(void)
{
+#if defined(CONFIG_NETTA_6412)
+ return bit_invert(*((volatile u16 *)DSP_BASE));
+#else
return *((volatile u16 *)DSP_BASE);
+#endif
}
static inline void dsp_write_hpic(u16 val)
{
+#if defined(CONFIG_NETTA_6412)
+ *((volatile u16 *)DSP_BASE) = bit_invert(val);
+#else
*((volatile u16 *)DSP_BASE) = val;
+#endif
}
static inline void dsp_reset(void)
{
+#if defined(CONFIG_NETTA_6412)
+ ((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 15));
+ udelay(500);
+ ((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat |= (1 << (15 - 15));
+ udelay(500);
+#else
((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 7));
udelay(250);
((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat |= (1 << (15 - 7));
udelay(250);
-}
-
-static inline void dsp_init_hpic(void)
-{
- int i;
- volatile u16 *p;
-
- dsp_go_slow();
-
- i = 0;
- while (i < 1000 && (dsp_read_hpic() & 0x08) == 0) {
- dsp_delay();
- i++;
- }
- dsp_delay();
-
- /* write control register */
- p = (volatile u16 *)DSP_BASE;
- p[0] = 0x0000;
- dsp_delay();
- p[1] = 0x0000;
- dsp_delay();
-
- dsp_go_fast();
-}
-
-static inline void dsp_wait_hrdy(void)
-{
- int i;
-
- i = 0;
- while (i < 1000 && (dsp_read_hpic() & 0x08) == 0) {
- dsp_delay();
- i++;
- }
+#endif
}
static inline u32 dsp_read_hpic_word(u32 addr)
{
u32 val;
volatile u16 *p;
+#if defined(CONFIG_NETTA_6412)
+ p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
+ val = ((u32) bit_invert(p[0]) << 16);
+ /* dsp_delay(); */
+
+ val |= bit_invert(p[1]);
+ /* dsp_delay(); */
+#else
p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
val = ((u32) p[0] << 16);
@@ -152,40 +180,80 @@ static inline u32 dsp_read_hpic_word(u32 addr)
val |= p[1];
dsp_delay();
-
+#endif
return val;
}
static inline u16 dsp_read_hpic_hi_hword(u32 addr)
{
+#if defined(CONFIG_NETTA_6412)
+ return bit_invert(*(volatile u16 *)((volatile u8 *)DSP_BASE + addr));
+#else
return *(volatile u16 *)((volatile u8 *)DSP_BASE + addr);
+#endif
}
static inline u16 dsp_read_hpic_lo_hword(u32 addr)
{
+#if defined(CONFIG_NETTA_6412)
+ return bit_invert(*(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2));
+#else
return *(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2);
+#endif
+}
+
+static inline void dsp_wait_hrdy(void)
+{
+ int i;
+
+ i = 0;
+#if defined(CONFIG_NETTA_6412)
+ while (i < 1000 && (dsp_read_hpic_word(DSP_HPIC) & 0x08) == 0) {
+#else
+ while (i < 1000 && (dsp_read_hpic() & 0x08) == 0) {
+#endif
+ dsp_delay();
+ i++;
+ }
}
static inline void dsp_write_hpic_word(u32 addr, u32 val)
{
volatile u16 *p;
+#if defined(CONFIG_NETTA_6412)
+ p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
+ p[0] = bit_invert((u16)(val >> 16));
+ /* dsp_delay(); */
+ p[1] = bit_invert((u16)val);
+ /* dsp_delay(); */
+#else
p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
p[0] = (u16)(val >> 16);
dsp_delay();
p[1] = (u16)val;
dsp_delay();
+#endif
}
static inline void dsp_write_hpic_hi_hword(u32 addr, u16 val_h)
{
+#if defined(CONFIG_NETTA_6412)
+ *(volatile u16 *)((volatile u8 *)DSP_BASE + addr) = bit_invert(val_h);
+#else
+
*(volatile u16 *)((volatile u8 *)DSP_BASE + addr) = val_h;
+#endif
}
static inline void dsp_write_hpic_lo_hword(u32 addr, u16 val_l)
{
+#if defined(CONFIG_NETTA_6412)
+ *(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2) = bit_invert(val_l);
+#else
*(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2) = val_l;
+#endif
}
/********************************************************************/
@@ -193,21 +261,29 @@ static inline void dsp_write_hpic_lo_hword(u32 addr, u16 val_l)
static inline void c62_write_word(u32 addr, u32 val)
{
dsp_write_hpic_hi_hword(DSP_HPIA, (u16)(addr >> 16));
+#if !defined(CONFIG_NETTA_6412)
dsp_delay();
+#endif
dsp_write_hpic_lo_hword(DSP_HPIA, (u16)addr);
+#if !defined(CONFIG_NETTA_6412)
dsp_delay();
+#endif
dsp_wait_hrdy();
+#if !defined(CONFIG_NETTA_6412)
dsp_delay();
-
+#endif
dsp_write_hpic_hi_hword(DSP_HPID2, (u16)(val >> 16));
+#if !defined(CONFIG_NETTA_6412)
dsp_delay();
- dsp_wait_hrdy();
- dsp_delay();
-
+ /* dsp_wait_hrdy();
+ dsp_delay(); */
+#endif
dsp_write_hpic_lo_hword(DSP_HPID2, (u16)val);
+#if !defined(CONFIG_NETTA_6412)
dsp_delay();
+#endif
}
static u32 c62_read_word(u32 addr)
@@ -215,26 +291,36 @@ static u32 c62_read_word(u32 addr)
u32 val;
dsp_write_hpic_hi_hword(DSP_HPIA, (u16)(addr >> 16));
+#if !defined(CONFIG_NETTA_6412)
dsp_delay();
+#endif
dsp_write_hpic_lo_hword(DSP_HPIA, (u16)addr);
+#if !defined(CONFIG_NETTA_6412)
dsp_delay();
+#endif
/* FETCH */
+#if defined(CONFIG_NETTA_6412)
+ dsp_write_hpic_word(DSP_HPIC, 0x00100010);
+#else
dsp_write_hpic(0x10);
dsp_delay();
-
+#endif
dsp_wait_hrdy();
+#if !defined(CONFIG_NETTA_6412)
dsp_delay();
-
+#endif
val = (u32)dsp_read_hpic_hi_hword(DSP_HPID2) << 16;
+#if !defined(CONFIG_NETTA_6412)
dsp_delay();
- dsp_wait_hrdy();
- dsp_delay();
-
+ /* dsp_wait_hrdy();
+ dsp_delay(); */
+#endif
val |= dsp_read_hpic_lo_hword(DSP_HPID2);
+#if !defined(CONFIG_NETTA_6412)
dsp_delay();
-
+#endif
return val;
}
@@ -300,8 +386,88 @@ static inline int c62_write_validated(u32 addr, const u32 *buffer, int numdata)
return 0;
}
+#if defined(CONFIG_NETTA_6412)
+
+#define DRAM_REGS_BASE 0x1800000
+
+#define GBLCTL DRAM_REGS_BASE
+#define CECTL1 (DRAM_REGS_BASE + 0x4)
+#define CECTL0 (DRAM_REGS_BASE + 0x8)
+#define CECTL2 (DRAM_REGS_BASE + 0x10)
+#define CECTL3 (DRAM_REGS_BASE + 0x14)
+#define SDCTL (DRAM_REGS_BASE + 0x18)
+#define SDTIM (DRAM_REGS_BASE + 0x1C)
+#define SDEXT (DRAM_REGS_BASE + 0x20)
+#define SESEC1 (DRAM_REGS_BASE + 0x44)
+#define SESEC0 (DRAM_REGS_BASE + 0x48)
+#define SESEC2 (DRAM_REGS_BASE + 0x50)
+#define SESEC3 (DRAM_REGS_BASE + 0x54)
+
+#define MAR128 0x1848200
+#define MAR129 0x1848204
+
+void dsp_dram_initialize(void)
+{
+ c62_write_word(GBLCTL, 0x120E4);
+ c62_write_word(CECTL1, 0x18);
+ c62_write_word(CECTL0, 0xD0);
+ c62_write_word(CECTL2, 0x18);
+ c62_write_word(CECTL3, 0x18);
+ c62_write_word(SDCTL, 0x47115000);
+ c62_write_word(SDTIM, 1536);
+ c62_write_word(SDEXT, 0x534A9);
+#if 0
+ c62_write_word(SESEC1, 0);
+ c62_write_word(SESEC0, 0);
+ c62_write_word(SESEC2, 0);
+ c62_write_word(SESEC3, 0);
+#endif
+ c62_write_word(MAR128, 1);
+ c62_write_word(MAR129, 0);
+}
+
+#endif
+
+static inline void dsp_init_hpic(void)
+{
+ int i;
+ volatile u16 *p;
+#if defined(CONFIG_NETTA_6412)
+ dsp_go_fast();
+#else
+ dsp_go_slow();
+#endif
+ i = 0;
+#if defined(CONFIG_NETTA_6412)
+ while (i < 1000 && (dsp_read_hpic_word(DSP_HPIC) & 0x08) == 0) {
+#else
+ while (i < 1000 && (dsp_read_hpic() & 0x08) == 0) {
+#endif
+ dsp_delay();
+ i++;
+ }
+
+ if (i == 1000)
+ printf("HRDY stuck\n");
+
+ dsp_delay();
+
+ /* write control register */
+ p = (volatile u16 *)DSP_BASE;
+ p[0] = 0x0000;
+ dsp_delay();
+ p[1] = 0x0000;
+ dsp_delay();
+
+#if !defined(CONFIG_NETTA_6412)
+ dsp_go_fast();
+#endif
+}
+
/***********************************************************************************************************/
+#if !defined(CONFIG_NETTA_6412)
+
static const u8 bootstrap_rbin[5084] = {
0x52, 0x42, 0x49, 0x4e, 0xc5, 0xa9, 0x9f, 0x1a, 0x00, 0x00, 0x00, 0x02,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x20, 0x00,
@@ -931,18 +1097,23 @@ static void run_bootstrap(void)
dsp_go_fast();
}
+#endif
+
/***********************************************************************************************************/
int board_post_dsp(int flags)
{
u32 ramS, ramE;
u32 data, data2;
- int i, j, k, r;
-
+ int i, j, k;
+#if !defined(CONFIG_NETTA_6412)
+ int r;
+#endif
dsp_reset();
dsp_init_hpic();
+#if !defined(CONFIG_NETTA_6412)
dsp_go_slow();
-
+#endif
data = 0x11223344;
dsp_write_hpic_word(DSP_HPIA, data);
data2 = dsp_read_hpic_word(DSP_HPIA);
@@ -958,7 +1129,9 @@ int board_post_dsp(int flags)
printf("HPIA: ** ERROR; wrote 0x%08X read 0x%08X **\n", data, data2);
goto err;
}
-
+#if defined(CONFIG_NETTA_6412)
+ dsp_dram_initialize();
+#else
r = load_bootstrap();
if (r < 0) {
printf("BOOTSTRAP: ** ERROR ** failed to load\n");
@@ -968,7 +1141,7 @@ int board_post_dsp(int flags)
run_bootstrap();
dsp_go_fast();
-
+#endif
printf(" ");
/* test RAMs */
@@ -1001,12 +1174,12 @@ int board_post_dsp(int flags)
}
printf("\b\b\b\b \b\b\b\bOK\n");
-
+#if !defined(CONFIG_NETTA_6412)
/* XXX assume that this works */
load_bootstrap();
run_bootstrap();
dsp_go_fast();
-
+#endif
return 0;
err:
@@ -1015,10 +1188,14 @@ err:
int board_dsp_reset(void)
{
+#if !defined(CONFIG_NETTA_6412)
int r;
-
+#endif
dsp_reset();
dsp_init_hpic();
+#if defined(CONFIG_NETTA_6412)
+ dsp_dram_initialize();
+#else
dsp_go_slow();
r = load_bootstrap();
if (r < 0)
@@ -1026,6 +1203,6 @@ int board_dsp_reset(void)
run_bootstrap();
dsp_go_fast();
-
+#endif
return 0;
}
diff --git a/board/netta/netta.c b/board/netta/netta.c
index afb3fe18332..e7024e52d3c 100644
--- a/board/netta/netta.c
+++ b/board/netta/netta.c
@@ -64,6 +64,11 @@ int checkboard(void)
#if defined(CONFIG_NETTA_ISDN)
" with ISDN support"
#endif
+#if defined(CONFIG_NETTA_6412)
+ " (DSP:TI6412)"
+#else
+ " (DSP:TI6711)"
+#endif
"\n"
);
return (0);
@@ -462,10 +467,10 @@ int last_stage_init(void)
#define PA_SP_DIRVAL 0
#define PB_GP_INMASK (_B(28) | _B(31))
-#define PB_GP_OUTMASK (_BR(16, 19) | _BR(26, 27) | _BR(29, 30))
+#define PB_GP_OUTMASK (_BR(15, 19) | _BR(26, 27) | _BR(29, 30))
#define PB_SP_MASK (_BR(22, 25))
#define PB_ODR_VAL 0
-#define PB_GP_OUTVAL (_BR(16, 19) | _BR(26, 27) | _BR(29, 31))
+#define PB_GP_OUTVAL (_BR(15, 19) | _BR(26, 27) | _BR(29, 31))
#define PB_SP_DIRVAL 0
#define PC_GP_INMASK (_BW(5) | _BW(7) | _BW(8) | _BWR(9, 11) | _BWR(13, 15))
@@ -479,7 +484,17 @@ int last_stage_init(void)
#define PD_GP_INMASK 0
#define PD_GP_OUTMASK _BWR(3, 15)
#define PD_SP_MASK 0
+
+#if defined(CONFIG_NETTA_6412)
+
+#define PD_GP_OUTVAL (_BWR(5, 7) | _BW(9) | _BW(11) | _BW(15))
+
+#else
+
#define PD_GP_OUTVAL (_BWR(5, 7) | _BW(9) | _BW(11))
+
+#endif
+
#define PD_SP_DIRVAL 0
int board_early_init_f(void)
@@ -492,11 +507,15 @@ int board_early_init_f(void)
/* CS1: NAND chip select */
memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_SCY_2_CLK | OR_TRLX | OR_ACS_DIV2) ;
memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
-
+#if !defined(CONFIG_NETTA_6412)
/* CS2: DSP */
memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_7_CLK | OR_ACS_DIV2);
memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
-
+#else
+ /* CS6: DSP */
+ memctl->memc_or6 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_7_CLK | OR_ACS_DIV2);
+ memctl->memc_br6 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
+#endif
/* CS4: External register chip select */
memctl->memc_or4 = ((0xFFFFFFFFLU & ~(ER_SIZE - 1)) | OR_BI | OR_SCY_4_CLK);
memctl->memc_br4 = ((ER_BASE & BR_BA_MSK) | BR_PS_32 | BR_V);
@@ -525,7 +544,7 @@ int board_early_init_f(void)
ioport->iop_pddir = PD_GP_OUTMASK | PD_SP_DIRVAL;
ioport->iop_pdpar = PD_SP_MASK;
- ioport->iop_pddat |= (1 << (15 - 6)) | (1 << (15 - 7));
+ /* ioport->iop_pddat |= (1 << (15 - 6)) | (1 << (15 - 7)); */
return 0;
}
diff --git a/board/netta2/Makefile b/board/netta2/Makefile
new file mode 100644
index 00000000000..d45702091f0
--- /dev/null
+++ b/board/netta2/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/netta2/config.mk b/board/netta2/config.mk
new file mode 100644
index 00000000000..8497ebc812b
--- /dev/null
+++ b/board/netta2/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# netVia Boards
+#
+
+TEXT_BASE = 0x40000000
diff --git a/board/netta2/flash.c b/board/netta2/flash.c
new file mode 100644
index 00000000000..a1c87f51310
--- /dev/null
+++ b/board/netta2/flash.c
@@ -0,0 +1,506 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_byte(flash_info_t * info, ulong dest, uchar data);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i)
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+
+ size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size, size << 20);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
+
+ /* Re-do sizing to get full correct info */
+ size = flash_get_size((vu_long *) CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets(CFG_FLASH_BASE, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_FLASH_BASE, CFG_FLASH_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
+
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+
+#ifdef CFG_ENV_ADDR_REDUND
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+ &flash_info[0]);
+#endif
+
+ flash_info[0].size = size;
+
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets(ulong base, flash_info_t * info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000);
+ }
+ } else if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info(flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ printf("AMD ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf("FUJITSU ");
+ break;
+ case FLASH_MAN_MX:
+ printf("MXIC ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040:
+ printf("AM29LV040B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400B:
+ printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T:
+ printf("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B:
+ printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T:
+ printf("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM160B:
+ printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T:
+ printf("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B:
+ printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T:
+ printf("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ break;
+ }
+
+ printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " ");
+ }
+ printf("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+ short i;
+ uchar mid;
+ uchar pid;
+ vu_char *caddr = (vu_char *) addr;
+ ulong base = (ulong) addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ caddr[0x0555] = 0xAA;
+ caddr[0x02AA] = 0x55;
+ caddr[0x0555] = 0x90;
+
+ mid = caddr[0];
+ switch (mid) {
+ case (AMD_MANUFACT & 0xFF):
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (FUJ_MANUFACT & 0xFF):
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (MX_MANUFACT & 0xFF):
+ info->flash_id = FLASH_MAN_MX;
+ break;
+ case (STM_MANUFACT & 0xFF):
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ pid = caddr[1]; /* device ID */
+ switch (pid) {
+ case (AMD_ID_LV400T & 0xFF):
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 512 kB */
+
+ case (AMD_ID_LV400B & 0xFF):
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 512 kB */
+
+ case (AMD_ID_LV800T & 0xFF):
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV800B & 0xFF):
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (AMD_ID_LV160T & 0xFF):
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (AMD_ID_LV160B & 0xFF):
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (AMD_ID_LV040B & 0xFF):
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break;
+
+ case (STM_ID_M29W040B & 0xFF):
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break;
+
+#if 0 /* enable when device IDs are available */
+ case (AMD_ID_LV320T & 0xFF):
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (AMD_ID_LV320B & 0xFF):
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 67;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+#endif
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ printf(" ");
+ /* set up sector start address table */
+ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000);
+ }
+ } else if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection: D0 = 1 if protected */
+ caddr = (volatile unsigned char *)(info->start[i]);
+ info->protect[i] = caddr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ caddr = (vu_char *) info->start[0];
+
+ caddr[0x0555] = 0xAA;
+ caddr[0x02AA] = 0x55;
+ caddr[0x0555] = 0xF0;
+
+ udelay(20000);
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ vu_char *addr = (vu_char *) (info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("- missing\n");
+ } else {
+ printf("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sectors will not be erased!\n", prot);
+ } else {
+ printf("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAA;
+ addr[0x02AA] = 0x55;
+ addr[0x0555] = 0x80;
+ addr[0x0555] = 0xAA;
+ addr[0x02AA] = 0x55;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_char *) (info->start[sect]);
+ addr[0] = 0x30;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer(0);
+ last = start;
+ addr = (vu_char *) (info->start[l_sect]);
+ while ((addr[0] & 0x80) != 0x80) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (vu_char *) info->start[0];
+ addr[0] = 0xF0; /* reset bank */
+
+ printf(" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ int rc;
+
+ while (cnt > 0) {
+ if ((rc = write_byte(info, addr++, *src++)) != 0) {
+ return (rc);
+ }
+ --cnt;
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_byte(flash_info_t * info, ulong dest, uchar data)
+{
+ vu_char *addr = (vu_char *) (info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_char *) dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAA;
+ addr[0x02AA] = 0x55;
+ addr[0x0555] = 0xA0;
+
+ *((vu_char *) dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
diff --git a/board/netta2/netta2.c b/board/netta2/netta2.c
new file mode 100644
index 00000000000..f4ce7a4946e
--- /dev/null
+++ b/board/netta2/netta2.c
@@ -0,0 +1,664 @@
+/*
+ * (C) Copyright 2000-2004
+ * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
+ * U-Boot port on NetTA4 board
+ */
+
+#include <common.h>
+#include <miiphy.h>
+
+#include "mpc8xx.h"
+
+#ifdef CONFIG_HW_WATCHDOG
+#include <watchdog.h>
+#endif
+
+/****************************************************************/
+
+/* some sane bit macros */
+#define _BD(_b) (1U << (31-(_b)))
+#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
+
+#define _BW(_b) (1U << (15-(_b)))
+#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
+
+#define _BB(_b) (1U << (7-(_b)))
+#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
+
+#define _B(_b) _BD(_b)
+#define _BR(_l, _h) _BDR(_l, _h)
+
+/****************************************************************/
+
+/*
+ * Check Board Identity:
+ *
+ * Return 1 always.
+ */
+
+int checkboard(void)
+{
+ printf ("Intracom NetTA2 V%d\n", CONFIG_NETTA2_VERSION);
+ return (0);
+}
+
+/****************************************************************/
+
+#define _NOT_USED_ 0xFFFFFFFF
+
+/****************************************************************/
+
+#define CS_0000 0x00000000
+#define CS_0001 0x10000000
+#define CS_0010 0x20000000
+#define CS_0011 0x30000000
+#define CS_0100 0x40000000
+#define CS_0101 0x50000000
+#define CS_0110 0x60000000
+#define CS_0111 0x70000000
+#define CS_1000 0x80000000
+#define CS_1001 0x90000000
+#define CS_1010 0xA0000000
+#define CS_1011 0xB0000000
+#define CS_1100 0xC0000000
+#define CS_1101 0xD0000000
+#define CS_1110 0xE0000000
+#define CS_1111 0xF0000000
+
+#define BS_0000 0x00000000
+#define BS_0001 0x01000000
+#define BS_0010 0x02000000
+#define BS_0011 0x03000000
+#define BS_0100 0x04000000
+#define BS_0101 0x05000000
+#define BS_0110 0x06000000
+#define BS_0111 0x07000000
+#define BS_1000 0x08000000
+#define BS_1001 0x09000000
+#define BS_1010 0x0A000000
+#define BS_1011 0x0B000000
+#define BS_1100 0x0C000000
+#define BS_1101 0x0D000000
+#define BS_1110 0x0E000000
+#define BS_1111 0x0F000000
+
+#define GPL0_AAAA 0x00000000
+#define GPL0_AAA0 0x00200000
+#define GPL0_AAA1 0x00300000
+#define GPL0_000A 0x00800000
+#define GPL0_0000 0x00A00000
+#define GPL0_0001 0x00B00000
+#define GPL0_111A 0x00C00000
+#define GPL0_1110 0x00E00000
+#define GPL0_1111 0x00F00000
+
+#define GPL1_0000 0x00000000
+#define GPL1_0001 0x00040000
+#define GPL1_1110 0x00080000
+#define GPL1_1111 0x000C0000
+
+#define GPL2_0000 0x00000000
+#define GPL2_0001 0x00010000
+#define GPL2_1110 0x00020000
+#define GPL2_1111 0x00030000
+
+#define GPL3_0000 0x00000000
+#define GPL3_0001 0x00004000
+#define GPL3_1110 0x00008000
+#define GPL3_1111 0x0000C000
+
+#define GPL4_0000 0x00000000
+#define GPL4_0001 0x00001000
+#define GPL4_1110 0x00002000
+#define GPL4_1111 0x00003000
+
+#define GPL5_0000 0x00000000
+#define GPL5_0001 0x00000400
+#define GPL5_1110 0x00000800
+#define GPL5_1111 0x00000C00
+#define LOOP 0x00000080
+
+#define EXEN 0x00000040
+
+#define AMX_COL 0x00000000
+#define AMX_ROW 0x00000020
+#define AMX_MAR 0x00000030
+
+#define NA 0x00000008
+
+#define UTA 0x00000004
+
+#define TODT 0x00000002
+
+#define LAST 0x00000001
+
+#define A10_AAAA GPL0_AAAA
+#define A10_AAA0 GPL0_AAA0
+#define A10_AAA1 GPL0_AAA1
+#define A10_000A GPL0_000A
+#define A10_0000 GPL0_0000
+#define A10_0001 GPL0_0001
+#define A10_111A GPL0_111A
+#define A10_1110 GPL0_1110
+#define A10_1111 GPL0_1111
+
+#define RAS_0000 GPL1_0000
+#define RAS_0001 GPL1_0001
+#define RAS_1110 GPL1_1110
+#define RAS_1111 GPL1_1111
+
+#define CAS_0000 GPL2_0000
+#define CAS_0001 GPL2_0001
+#define CAS_1110 GPL2_1110
+#define CAS_1111 GPL2_1111
+
+#define WE_0000 GPL3_0000
+#define WE_0001 GPL3_0001
+#define WE_1110 GPL3_1110
+#define WE_1111 GPL3_1111
+
+/* #define CAS_LATENCY 3 */
+#define CAS_LATENCY 2
+
+const uint sdram_table[0x40] = {
+
+#if CAS_LATENCY == 3
+ /* RSS */
+ CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
+ CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
+ CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
+ CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
+ _NOT_USED_, _NOT_USED_,
+
+ /* RBS */
+ CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
+ CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
+ CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
+ CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
+ CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* WSS */
+ CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
+ CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */
+ CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* WBS */
+ CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
+ CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */
+ CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
+ CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+#endif
+
+#if CAS_LATENCY == 2
+ /* RSS */
+ CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
+ CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */
+ CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
+ CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */
+ CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
+ _NOT_USED_,
+ _NOT_USED_, _NOT_USED_,
+
+ /* RBS */
+ CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
+ CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */
+ CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */
+ CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */
+ CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
+ _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* WSS */
+ CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
+ CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */
+ CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */
+ CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
+ _NOT_USED_,
+ _NOT_USED_, _NOT_USED_,
+ _NOT_USED_,
+
+ /* WBS */
+ CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */
+ CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */
+ CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL, /* WRITE */
+ CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */
+ CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA, /* NOP */
+ CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */
+ _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_,
+
+#endif
+
+ /* UPT */
+ CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP, /* ATRFR */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP, /* NOP */
+ CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_,
+
+ /* EXC */
+ CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST,
+ _NOT_USED_,
+
+ /* REG */
+ CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA,
+ CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST,
+};
+
+#if CONFIG_NETTA2_VERSION == 2
+static const uint nandcs_table[0x40] = {
+ /* RSS */
+ CS_1000 | GPL4_1111 | GPL5_1111 | UTA,
+ CS_0000 | GPL4_1110 | GPL5_1111 | UTA,
+ CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
+ CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
+ CS_0000 | GPL4_0000 | GPL5_1111,
+ CS_0000 | GPL4_0001 | GPL5_1111 | UTA,
+ CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
+ CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, /* NOP */
+
+ /* RBS */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* WSS */
+ CS_1000 | GPL4_1111 | GPL5_1110 | UTA,
+ CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
+ CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
+ CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
+ CS_0000 | GPL4_1111 | GPL5_0001 | UTA,
+ CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
+ CS_0000 | GPL4_1111 | GPL5_1111,
+ CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,
+
+ /* WBS */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* UPT */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* EXC */
+ CS_0001 | LAST,
+ _NOT_USED_,
+
+ /* REG */
+ CS_1110 ,
+ CS_0001 | LAST,
+};
+#endif
+
+/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */
+/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */
+#define MAR_SDRAM_INIT ((CAS_LATENCY << 6) | 0x00000008LU)
+
+/* 8 */
+#define CFG_MAMR ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+
+void check_ram(unsigned int addr, unsigned int size)
+{
+ unsigned int i, j, v, vv;
+ volatile unsigned int *p;
+ unsigned int pv;
+
+ p = (unsigned int *)addr;
+ pv = (unsigned int)p;
+ for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int))
+ *p++ = pv;
+
+ p = (unsigned int *)addr;
+ for (i = 0; i < size / sizeof(unsigned int); i++) {
+ v = (unsigned int)p;
+ vv = *p;
+ if (vv != v) {
+ printf("%p: read %08x instead of %08x\n", p, vv, v);
+ hang();
+ }
+ p++;
+ }
+
+ for (j = 0; j < 5; j++) {
+ switch (j) {
+ case 0: v = 0x00000000; break;
+ case 1: v = 0xffffffff; break;
+ case 2: v = 0x55555555; break;
+ case 3: v = 0xaaaaaaaa; break;
+ default:v = 0xdeadbeef; break;
+ }
+ p = (unsigned int *)addr;
+ for (i = 0; i < size / sizeof(unsigned int); i++) {
+ *p = v;
+ vv = *p;
+ if (vv != v) {
+ printf("%p: read %08x instead of %08x\n", p, vv, v);
+ hang();
+ }
+ *p = ~v;
+ p++;
+ }
+ }
+}
+
+long int initdram(int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ long int size;
+
+ upmconfig(UPMB, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0]));
+
+ /*
+ * Preliminary prescaler for refresh
+ */
+ memctl->memc_mptpr = MPTPR_PTP_DIV8;
+
+ memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */
+
+ /*
+ * Map controller bank 3 to the SDRAM bank at preliminary address.
+ */
+ memctl->memc_or3 = CFG_OR3_PRELIM;
+ memctl->memc_br3 = CFG_BR3_PRELIM;
+
+ memctl->memc_mbmr = CFG_MAMR & ~MAMR_PTAE; /* no refresh yet */
+
+ udelay(200);
+
+ /* perform SDRAM initialisation sequence */
+ memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3C); /* precharge all */
+ udelay(1);
+
+ memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(2) | MCR_MAD(0x30); /* refresh 2 times(0) */
+ udelay(1);
+
+ memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3E); /* exception program (write mar)*/
+ udelay(1);
+
+ memctl->memc_mbmr |= MAMR_PTAE; /* enable refresh */
+
+ udelay(10000);
+
+ {
+ u32 d1, d2;
+
+ d1 = 0xAA55AA55;
+ *(volatile u32 *)0 = d1;
+ d2 = *(volatile u32 *)0;
+ if (d1 != d2) {
+ printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
+ hang();
+ }
+
+ d1 = 0x55AA55AA;
+ *(volatile u32 *)0 = d1;
+ d2 = *(volatile u32 *)0;
+ if (d1 != d2) {
+ printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
+ hang();
+ }
+ }
+
+ size = get_ram_size((long *)0, SDRAM_MAX_SIZE);
+
+ if (size == 0) {
+ printf("SIZE is zero: LOOP on 0\n");
+ for (;;) {
+ *(volatile u32 *)0 = 0;
+ (void)*(volatile u32 *)0;
+ }
+ }
+
+ return size;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void reset_phys(void)
+{
+ int phyno;
+ unsigned short v;
+
+ udelay(10000);
+ /* reset the damn phys */
+ mii_init();
+
+ for (phyno = 0; phyno < 32; ++phyno) {
+ miiphy_read(phyno, PHY_PHYIDR1, &v);
+ if (v == 0xFFFF)
+ continue;
+ miiphy_write(phyno, PHY_BMCR, PHY_BMCR_POWD);
+ udelay(10000);
+ miiphy_write(phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
+ udelay(10000);
+ }
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* GP = general purpose, SP = special purpose (on chip peripheral) */
+
+/* bits that can have a special purpose or can be configured as inputs/outputs */
+#define PA_GP_INMASK 0
+#define PA_GP_OUTMASK (_BW(3) | _BW(7) | _BW(10) | _BW(14) | _BW(15))
+#define PA_SP_MASK 0
+#define PA_ODR_VAL 0
+#define PA_GP_OUTVAL (_BW(3) | _BW(14) | _BW(15))
+#define PA_SP_DIRVAL 0
+
+#define PB_GP_INMASK _B(28)
+#define PB_GP_OUTMASK (_B(19) | _B(23) | _B(26) | _B(27) | _B(29) | _B(30))
+#define PB_SP_MASK (_BR(22, 25))
+#define PB_ODR_VAL 0
+#define PB_GP_OUTVAL (_B(26) | _B(27) | _B(29) | _B(30))
+#define PB_SP_DIRVAL 0
+
+#if CONFIG_NETTA2_VERSION == 1
+#define PC_GP_INMASK _BW(12)
+#define PC_GP_OUTMASK (_BW(10) | _BW(11) | _BW(13) | _BW(15))
+#elif CONFIG_NETTA2_VERSION == 2
+#define PC_GP_INMASK (_BW(13) | _BW(15))
+#define PC_GP_OUTMASK (_BW(10) | _BW(11) | _BW(12))
+#endif
+#define PC_SP_MASK 0
+#define PC_SOVAL 0
+#define PC_INTVAL 0
+#define PC_GP_OUTVAL (_BW(10) | _BW(11))
+#define PC_SP_DIRVAL 0
+
+#if CONFIG_NETTA2_VERSION == 1
+#define PE_GP_INMASK _B(31)
+#define PE_GP_OUTMASK (_B(17) | _B(18) |_B(20) | _B(24) | _B(27) | _B(28) | _B(29) | _B(30))
+#define PE_GP_OUTVAL (_B(20) | _B(24) | _B(27) | _B(28))
+#elif CONFIG_NETTA2_VERSION == 2
+#define PE_GP_INMASK _BR(28, 31)
+#define PE_GP_OUTMASK (_B(17) | _B(18) |_B(20) | _B(24) | _B(27))
+#define PE_GP_OUTVAL (_B(20) | _B(24) | _B(27))
+#endif
+#define PE_SP_MASK 0
+#define PE_ODR_VAL 0
+#define PE_SP_DIRVAL 0
+
+int board_early_init_f(void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile iop8xx_t *ioport = &immap->im_ioport;
+ volatile cpm8xx_t *cpm = &immap->im_cpm;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ /* NAND chip select */
+#if CONFIG_NETTA2_VERSION == 1
+ memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK | OR_EHTR | OR_TRLX);
+ memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
+#elif CONFIG_NETTA2_VERSION == 2
+ upmconfig(UPMA, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0]));
+ memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS);
+ memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMA);
+ memctl->memc_mamr = 0; /* all clear */
+#endif
+
+ /* DSP chip select */
+ memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_ACS_DIV2 | OR_SETA | OR_TRLX);
+ memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
+
+#if CONFIG_NETTA2_VERSION == 1
+ memctl->memc_br4 &= ~BR_V;
+#endif
+ memctl->memc_br5 &= ~BR_V;
+ memctl->memc_br6 &= ~BR_V;
+ memctl->memc_br7 &= ~BR_V;
+
+ ioport->iop_padat = PA_GP_OUTVAL;
+ ioport->iop_paodr = PA_ODR_VAL;
+ ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL;
+ ioport->iop_papar = PA_SP_MASK;
+
+ cpm->cp_pbdat = PB_GP_OUTVAL;
+ cpm->cp_pbodr = PB_ODR_VAL;
+ cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL;
+ cpm->cp_pbpar = PB_SP_MASK;
+
+ ioport->iop_pcdat = PC_GP_OUTVAL;
+ ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL;
+ ioport->iop_pcso = PC_SOVAL;
+ ioport->iop_pcint = PC_INTVAL;
+ ioport->iop_pcpar = PC_SP_MASK;
+
+ cpm->cp_pedat = PE_GP_OUTVAL;
+ cpm->cp_peodr = PE_ODR_VAL;
+ cpm->cp_pedir = PE_GP_OUTMASK | PE_SP_DIRVAL;
+ cpm->cp_pepar = PE_SP_MASK;
+
+ return 0;
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <linux/mtd/nand.h>
+
+extern ulong nand_probe(ulong physadr);
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+void nand_init(void)
+{
+ unsigned long totlen;
+
+ totlen = nand_probe(CFG_NAND_BASE);
+ printf ("%4lu MB\n", totlen >> 20);
+}
+#endif
+
+#ifdef CONFIG_HW_WATCHDOG
+
+void hw_watchdog_reset(void)
+{
+ /* XXX add here the really funky stuff */
+}
+
+#endif
+
+#ifdef CONFIG_SHOW_ACTIVITY
+
+/* called from timer interrupt every 1/CFG_HZ sec */
+void board_show_activity(ulong timestamp)
+{
+}
+
+/* called when looping */
+void show_activity(int arg)
+{
+}
+
+#endif
+
+#if defined(CFG_CONSOLE_IS_IN_ENV) && defined(CFG_CONSOLE_OVERWRITE_ROUTINE)
+int overwrite_console(void)
+{
+ /* printf("overwrite_console called\n"); */
+ return 0;
+}
+#endif
+
+extern int drv_phone_init(void);
+extern int drv_phone_use_me(void);
+extern int drv_phone_is_idle(void);
+
+int misc_init_r(void)
+{
+ return 0;
+}
+
+int last_stage_init(void)
+{
+#if CONFIG_NETTA2_VERSION == 2
+ int i;
+#endif
+
+#if CONFIG_NETTA2_VERSION == 2
+ /* assert peripheral reset */
+ ((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat &= ~_BW(12);
+ for (i = 0; i < 10; i++)
+ udelay(1000);
+ ((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat |= _BW(12);
+#endif
+ reset_phys();
+
+ return 0;
+}
diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds
new file mode 100644
index 00000000000..c3dac0ef4a5
--- /dev/null
+++ b/board/netta2/u-boot.lds
@@ -0,0 +1,138 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc8xx/start.o (.text)
+ cpu/mpc8xx/traps.o (.text)
+ common/dlmalloc.o (.text)
+ lib_ppc/ppcstring.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_generic/zlib.o (.text)
+ lib_ppc/cache.o (.text)
+ lib_ppc/time.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug
new file mode 100644
index 00000000000..21b7e6aabc0
--- /dev/null
+++ b/board/netta2/u-boot.lds.debug
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc8xx/start.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+
+ . = env_offset;
+ common/environment.o(.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index c6b84fae168..f8f56a31793 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -383,7 +383,7 @@ static void fec_pin_init(int fecidx)
*/
fecp->fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
-#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE)
+#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
/* our PHYs are the limit at 2.5 MHz */
fecp->fec_mii_speed <<= 1;
#endif
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index 9dadaa836a1..bf4c899592f 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -49,8 +49,8 @@
/* #define CONFIG_XIN 10000000 */
#define CONFIG_XIN 50000000
-#define MPC8XX_HZ 120000000
-/* #define MPC8XX_HZ 66666666 */
+/* #define MPC8XX_HZ 120000000 */
+#define MPC8XX_HZ 66666666
#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
@@ -67,8 +67,8 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
"bootm"
#define CONFIG_AUTOSCRIPT
@@ -336,16 +336,18 @@
*-----------------------------------------------------------------------
* Set clock output, timebase and RTC source and divider,
* power management and some other internal clocks
+ *
+ * Note: When TBS == 0 the timebase is independent of current cpu clock.
*/
#define SCCR_MASK SCCR_EBDF11
#if MPC8XX_HZ > 66666666
-#define CFG_SCCR (SCCR_TBS | \
+#define CFG_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
SCCR_DFALCD00 | SCCR_EBDF01)
#else
-#define CFG_SCCR (SCCR_TBS | \
+#define CFG_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
SCCR_DFALCD00)
@@ -491,6 +493,8 @@
/* NAND */
#define CFG_NAND_BASE NAND_BASE
#define CONFIG_MTD_NAND_ECC_JFFS2
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_MTD_NAND_UNSAFE
#define CFG_MAX_NAND_DEVICE 1
@@ -571,6 +575,11 @@
/*****************************************************************************/
+#define CFG_DIRECT_FLASH_TFTP
+#define CFG_DIRECT_NAND_TFTP
+
+/*****************************************************************************/
+
#if CONFIG_NETPHONE_VERSION == 1
#define STATUS_LED_BIT 0x00000008 /* bit 28 */
#elif CONFIG_NETPHONE_VERSION == 2
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index b720ec5be83..1d12eb4c674 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -65,8 +65,8 @@
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
"bootm"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
@@ -108,18 +108,22 @@
/* POST support */
#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CODEC | \
CFG_POST_DSP )
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_NAND | \
+ CFG_CMD_CDP | \
CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_MII | \
- CFG_CMD_PCMCIA | CFG_CMD_IDE | CFG_CMD_FAT | \
CFG_CMD_DIAG | \
+ CFG_CMD_FAT | \
+ CFG_CMD_IDE | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_MII | \
+ CFG_CMD_NAND | \
CFG_CMD_NFS | \
- CFG_CMD_CDP \
- )
+ CFG_CMD_PCMCIA | \
+ CFG_CMD_PING | \
+ 0)
#define CONFIG_BOARD_EARLY_INIT_F 1
#define CONFIG_MISC_INIT_R
@@ -339,18 +343,20 @@
*-----------------------------------------------------------------------
* Set clock output, timebase and RTC source and divider,
* power management and some other internal clocks
+ *
+ * Note: When TBS == 0 the timebase is independent of current cpu clock.
*/
#define SCCR_MASK SCCR_EBDF11
#if MPC8XX_HZ > 66666666
-#define CFG_SCCR (SCCR_TBS | \
+#define CFG_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL001 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \
SCCR_DFALCD00 | SCCR_EBDF01)
#else
-#define CFG_SCCR (SCCR_TBS | \
+#define CFG_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \
SCCR_DFALCD00)
#endif
@@ -604,10 +610,11 @@
/* NAND */
#define CFG_NAND_BASE NAND_BASE
-#define CONFIG_MTD_NAND_ECC_JFFS2
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_MTD_NAND_UNSAFE
#define CFG_MAX_NAND_DEVICE 1
-#define NAND_NO_RB
+/* #define NAND_NO_RB */
#define SECTORSIZE 512
#define ADDR_COLUMN 1
@@ -677,6 +684,17 @@
#define READ_NAND(adr) \
((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
+#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
+#define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */
+#define CONFIG_JFFS2_NAND_OFF (2 * 1024 * 1024) /* start of jffs2 partition */
+#define CONFIG_JFFS2_NAND_SIZE (1*1024*1024) /* size of jffs2 partition */
+#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */
+
+/*****************************************************************************/
+
+#define CFG_DIRECT_FLASH_TFTP
+#define CFG_DIRECT_NAND_TFTP
+
/*****************************************************************************/
#if 1
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
new file mode 100644
index 00000000000..529cb4cbae2
--- /dev/null
+++ b/include/configs/NETTA2.h
@@ -0,0 +1,762 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
+ * U-Boot port on NetTA4 board
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#if !defined(CONFIG_NETTA2_VERSION) || CONFIG_NETTA2_VERSION > 2
+#error Unsupported CONFIG_NETTA2 version
+#endif
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC870 1 /* This is a MPC885 CPU */
+#define CONFIG_NETTA2 1 /* ...on a NetTA2 board */
+
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#undef CONFIG_8xx_CONS_SMC2
+#undef CONFIG_8xx_CONS_NONE
+
+#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
+
+/* #define CONFIG_XIN 10000000 */
+#define CONFIG_XIN 50000000
+/* #define MPC8XX_HZ 120000000 */
+#define MPC8XX_HZ 66666666
+
+#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
+
+#define CONFIG_PREBOOT "echo;"
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+ "tftpboot; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
+ "bootm"
+
+#define CONFIG_AUTOSCRIPT
+#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
+#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
+
+#define CONFIG_STATUS_LED 1 /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
+
+#undef CONFIG_MAC_PARTITION
+#undef CONFIG_DOS_PARTITION
+
+#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
+
+#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
+#define FEC_ENET 1 /* eth.c needs it that way... */
+#undef CFG_DISCOVER_PHY
+#define CONFIG_MII 1
+#define CONFIG_RMII 1 /* use RMII interface */
+
+#define CONFIG_ETHER_ON_FEC1 1
+#define CONFIG_FEC1_PHY 8 /* phy address of FEC */
+#define CONFIG_FEC1_PHY_NORXERR 1
+
+#define CONFIG_ETHER_ON_FEC2 1
+#define CONFIG_FEC2_PHY 4
+#define CONFIG_FEC2_PHY_NORXERR 1
+
+#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_NAND | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PING | \
+ CFG_CMD_MII | \
+ CFG_CMD_CDP \
+ )
+
+#define CONFIG_BOARD_EARLY_INIT_F 1
+#define CONFIG_MISC_INIT_R
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#define CFG_HUSH_PARSER 1
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0300000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xFF000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x3000 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0x40000000
+#if defined(DEBUG)
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#else
+#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
+#endif
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#if CONFIG_NETTA2_VERSION == 2
+#define CFG_FLASH_BASE4 0x40080000
+#endif
+
+#define CFG_RESET_ADDRESS 0x80000000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#if CONFIG_NETTA2_VERSION == 1
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#elif CONFIG_NETTA2_VERSION == 2
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#endif
+#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SECT_SIZE 0x10000
+
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000)
+#define CFG_ENV_OFFSET 0
+#define CFG_ENV_SIZE 0x4000
+
+#define CFG_ENV_ADDR_REDUND (CFG_FLASH_BASE + 0x70000)
+#define CFG_ENV_OFFSET_REDUND 0
+#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#else /* we must activate GPL5 in the SIUMCR for CAN */
+#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
+#endif /* CONFIG_CAN_DRIVER */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control 11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register 11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ *
+ */
+
+#if CONFIG_XIN == 10000000
+
+#if MPC8XX_HZ == 120000000
+#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+ (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+ PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 100000000
+#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+ (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+ PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 50000000
+#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+ (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
+ PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 25000000
+#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+ (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
+ PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 40000000
+#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+ (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
+ PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 75000000
+#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+ (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+ PLPRCR_TEXPS)
+#else
+#error unsupported CPU freq for XIN = 10MHz
+#endif
+
+#elif CONFIG_XIN == 50000000
+
+#if MPC8XX_HZ == 120000000
+#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+ (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
+ PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 100000000
+#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+ (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
+ PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 66666666
+#define CFG_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+ (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
+ PLPRCR_TEXPS)
+#else
+#error unsupported CPU freq for XIN = 50MHz
+#endif
+
+#else
+
+#error unsupported XIN freq
+#endif
+
+
+/*
+ *-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register 15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ *
+ * Note: When TBS == 0 the timebase is independent of current cpu clock.
+ */
+
+#define SCCR_MASK SCCR_EBDF11
+#if MPC8XX_HZ > 66666666
+#define CFG_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00 | SCCR_EBDF01)
+#else
+#define CFG_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00)
+#endif
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+/*#define CFG_DER 0x2002000F*/
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
+#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
+
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
+#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+
+#if CONFIG_NETTA2_VERSION == 2
+
+#define FLASH_BASE4_PRELIM 0x40080000 /* FLASH bank #1 */
+
+#define CFG_OR4_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_OR4_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR4_PRELIM ((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+
+#endif
+
+/*
+ * BR3 and OR3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
+#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
+#define CFG_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
+
+#define CFG_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
+#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/*
+ * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ * gclk CPU clock (not bus clock!)
+ * Trefresh Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096 Rows from SDRAM example configuration
+ * 1000 factor s -> ms
+ * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
+ * 4 Number of refresh cycles per period
+ * 64 Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider = 98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
+ */
+
+#define CFG_MAMR_PTA 234
+
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
+ * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
+ */
+#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
+#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CONFIG_ARTOS /* include ARTOS support */
+
+#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
+
+/****************************************************************/
+
+#define DSP_SIZE 0x00010000 /* 64K */
+#define NAND_SIZE 0x00010000 /* 64K */
+
+#define DSP_BASE 0xF1000000
+#define NAND_BASE 0xF1010000
+
+/****************************************************************/
+
+/* NAND */
+#define CFG_NAND_BASE NAND_BASE
+#define CONFIG_MTD_NAND_ECC_JFFS2
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_MTD_NAND_UNSAFE
+
+#define CFG_MAX_NAND_DEVICE 1
+
+#define SECTORSIZE 512
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_MAX_FLOORS 1
+#define NAND_MAX_CHIPS 1
+
+/* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */
+#define NAND_DISABLE_CE(nand) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |= (1 << (31 - 20)); \
+ } while(0)
+
+#define NAND_ENABLE_CE(nand) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \
+ } while(0)
+
+#define NAND_CTL_CLRALE(nandptr) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \
+ } while(0)
+
+#define NAND_CTL_SETALE(nandptr) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |= (1 << (31 - 17)); \
+ } while(0)
+
+#define NAND_CTL_CLRCLE(nandptr) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \
+ } while(0)
+
+#define NAND_CTL_SETCLE(nandptr) \
+ do { \
+ (((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat) |= (1 << (31 - 18)); \
+ } while(0)
+
+#if CONFIG_NETTA2_VERSION == 1
+#define NAND_WAIT_READY(nand) \
+ do { \
+ int _tries = 0; \
+ while ((((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \
+ if (++_tries > 100000) \
+ break; \
+ } while (0)
+#elif CONFIG_NETTA2_VERSION == 2
+#define NAND_WAIT_READY(nand) \
+ do { \
+ int _tries = 0; \
+ while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 15))) == 0) \
+ if (++_tries > 100000) \
+ break; \
+ } while (0)
+#endif
+
+#define WRITE_NAND_COMMAND(d, adr) \
+ do { \
+ *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+ } while(0)
+
+#define WRITE_NAND_ADDRESS(d, adr) \
+ do { \
+ *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+ } while(0)
+
+#define WRITE_NAND(d, adr) \
+ do { \
+ *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+ } while(0)
+
+#define READ_NAND(adr) \
+ ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
+
+/*****************************************************************************/
+
+#define CFG_DIRECT_FLASH_TFTP
+#define CFG_DIRECT_NAND_TFTP
+
+/*****************************************************************************/
+
+#if CONFIG_NETTA2_VERSION == 1
+#define STATUS_LED_BIT 0x00000008 /* bit 28 */
+#elif CONFIG_NETTA2_VERSION == 2
+#define STATUS_LED_BIT 0x00000080 /* bit 24 */
+#endif
+
+#define STATUS_LED_PERIOD (CFG_HZ / 2)
+#define STATUS_LED_STATE STATUS_LED_BLINKING
+
+#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
+#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
+
+#ifndef __ASSEMBLY__
+
+/* LEDs */
+
+/* led_id_t is unsigned int mask */
+typedef unsigned int led_id_t;
+
+#define __led_toggle(_msk) \
+ do { \
+ ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat ^= (_msk); \
+ } while(0)
+
+#define __led_set(_msk, _st) \
+ do { \
+ if ((_st)) \
+ ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat |= (_msk); \
+ else \
+ ((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
+ } while(0)
+
+#define __led_init(msk, st) __led_set(msk, st)
+
+#endif
+
+/***********************************************************************************************************
+
+ ----------------------------------------------------------------------------------------------
+
+ (V1) version 1 of the board
+ (V2) version 2 of the board
+
+ ----------------------------------------------------------------------------------------------
+
+ Pin definitions:
+
+ +------+----------------+--------+------------------------------------------------------------
+ | # | Name | Type | Comment
+ +------+----------------+--------+------------------------------------------------------------
+ | PA3 | SPIEN_MAX | Output | MAX serial to uart chip select
+ | PA7 | DSP_INT | Output | DSP interrupt
+ | PA10 | DSP_RESET | Output | DSP reset
+ | PA14 | USBOE | Output | USB (1)
+ | PA15 | USBRXD | Output | USB (1)
+ | PB19 | BT_RTS | Output | Bluetooth (0)
+ | PB23 | BT_CTS | Output | Bluetooth (0)
+ | PB26 | SPIEN_SEP | Output | Serial EEPROM chip select
+ | PB27 | SPICS_DISP | Output | Display chip select
+ | PB28 | SPI_RXD_3V | Input | SPI Data Rx
+ | PB29 | SPI_TXD | Output | SPI Data Tx
+ | PB30 | SPI_CLK | Output | SPI Clock
+ | PC10 | DISPA0 | Output | Display A0
+ | PC11 | BACKLIGHT | Output | Display backlit
+ | PC12 | SPI2RXD | Input | (V1) 2nd SPI RXD
+ | | IO_RESET | Output | (V2) General I/O reset
+ | PC13 | SPI2TXD | Output | (V1) 2nd SPI TXD (V1)
+ | | HOOK | Input | (V2) Hook input interrupt
+ | PC15 | SPI2CLK | Output | (V1) 2nd SPI CLK
+ | | F_RY_BY | Input | (V2) NAND F_RY_BY
+ | PE17 | F_ALE | Output | NAND F_ALE
+ | PE18 | F_CLE | Output | NAND F_CLE
+ | PE20 | F_CE | Output | NAND F_CE
+ | PE24 | SPICS_SCOUT | Output | (V1) Codec chip select
+ | | LED | Output | (V2) LED
+ | PE27 | SPICS_ER | Output | External serial register CS
+ | PE28 | LEDIO1 | Output | (V1) LED
+ | | BKBR1 | Input | (V2) Keyboard input scan
+ | PE29 | LEDIO2 | Output | (V1) LED hook for A (TA2)
+ | | BKBR2 | Input | (V2) Keyboard input scan
+ | PE30 | LEDIO3 | Output | (V1) LED hook for A (TA2)
+ | | BKBR3 | Input | (V2) Keyboard input scan
+ | PE31 | F_RY_BY | Input | (V1) NAND F_RY_BY
+ | | BKBR4 | Input | (V2) Keyboard input scan
+ +------+----------------+--------+---------------------------------------------------
+
+ ----------------------------------------------------------------------------------------------
+
+ Serial register input:
+
+ +------+----------------+------------------------------------------------------------
+ | # | Name | Comment
+ +------+----------------+------------------------------------------------------------
+ | 4 | HOOK | Hook switch
+ | 5 | BT_LINK | Bluetooth link status
+ | 6 | HOST_WAKE | Bluetooth host wake up
+ | 7 | OK_ETH | Cisco inline power OK status
+ +------+----------------+------------------------------------------------------------
+
+ ----------------------------------------------------------------------------------------------
+
+ Chip selects:
+
+ +------+----------------+------------------------------------------------------------
+ | # | Name | Comment
+ +------+----------------+------------------------------------------------------------
+ | CS0 | CS0 | Boot flash
+ | CS1 | CS_FLASH | NAND flash
+ | CS2 | CS_DSP | DSP
+ | CS3 | DCS_DRAM | DRAM
+ | CS4 | CS_FLASH2 | (V2) 2nd flash
+ +------+----------------+------------------------------------------------------------
+
+ ----------------------------------------------------------------------------------------------
+
+ Interrupts:
+
+ +------+----------------+------------------------------------------------------------
+ | # | Name | Comment
+ +------+----------------+------------------------------------------------------------
+ | IRQ1 | IRQ_DSP | DSP interrupt
+ | IRQ3 | S_INTER | DUSLIC ???
+ | IRQ4 | F_RY_BY | NAND
+ | IRQ7 | IRQ_MAX | MAX 3100 interrupt
+ +------+----------------+------------------------------------------------------------
+
+ ----------------------------------------------------------------------------------------------
+
+ Interrupts on PCMCIA pins:
+
+ +------+----------------+------------------------------------------------------------
+ | # | Name | Comment
+ +------+----------------+------------------------------------------------------------
+ | IP_A0| PHY1_LINK | Link status changed for #1 Ethernet interface
+ | IP_A1| PHY2_LINK | Link status changed for #2 Ethernet interface
+ | IP_A2| RMII1_MDINT | PHY interrupt for #1
+ | IP_A3| RMII2_MDINT | PHY interrupt for #2
+ | IP_A5| HOST_WAKE | (V2) Bluetooth host wake
+ | IP_A6| OK_ETH | (V2) Cisco inline power OK
+ +------+----------------+------------------------------------------------------------
+
+**************************************************************************************************/
+
+#define CFG_CONSOLE_IS_IN_ENV 1
+#define CFG_CONSOLE_OVERWRITE_ROUTINE 1
+#define CFG_CONSOLE_ENV_OVERWRITE 1
+
+/*************************************************************************************************/
+
+/* use board specific hardware */
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_SHOW_ACTIVITY
+
+/*************************************************************************************************/
+
+#define CONFIG_CDP_DEVICE_ID 20
+#define CONFIG_CDP_DEVICE_ID_PREFIX "NT" /* netta2 */
+#define CONFIG_CDP_PORT_ID "eth%d"
+#define CONFIG_CDP_CAPABILITIES 0x00000010
+#define CONFIG_CDP_VERSION "u-boot" " " __DATE__ " " __TIME__
+#define CONFIG_CDP_PLATFORM "Intracom NetTA2"
+#define CONFIG_CDP_TRIGGER 0x20020001
+#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */
+#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone ? */
+
+/*************************************************************************************************/
+
+#define CONFIG_AUTO_COMPLETE 1
+
+/*************************************************************************************************/
+
+#define CONFIG_CRC32_VERIFY 1
+
+/*************************************************************************************************/
+
+#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
+
+/*************************************************************************************************/
+#endif /* __CONFIG_H */
diff --git a/include/post.h b/include/post.h
index b438838578e..cdefbddb6f5 100644
--- a/include/post.h
+++ b/include/post.h
@@ -90,6 +90,7 @@ extern int post_hotkeys_pressed(void);
#define CFG_POST_SPR 0x00000400
#define CFG_POST_SYSMON 0x00000800
#define CFG_POST_DSP 0x00001000
+#define CFG_POST_CODEC 0x00002000
#endif /* CONFIG_POST */
diff --git a/include/status_led.h b/include/status_led.h
index cad287d43f2..dc4b898c0e3 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -334,7 +334,7 @@ void status_led_set (int led, int state);
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
/***** NetPhone ********************************************************/
-#elif defined(CONFIG_NETPHONE)
+#elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
/* XXX empty just to avoid the error */
/************************************************************************/
#else
diff --git a/post/Makefile b/post/Makefile
index ec49156977c..4ee429de4e5 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -27,7 +27,7 @@ SUBDIRS = cpu
LIB = libpost.a
AOBJS = cache_8xx.o
-COBJS = cache.o cpu.o dsp.o ether.o
+COBJS = cache.o codec.o cpu.o dsp.o ether.o
COBJS += i2c.o memory.o post.o rtc.o
COBJS += spr.o sysmon.o tests.o uart.o
COBJS += usb.o watchdog.o
diff --git a/post/codec.c b/post/codec.c
new file mode 100644
index 00000000000..e8817520fc6
--- /dev/null
+++ b/post/codec.c
@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2004
+ * Pantelis Antoniou, Intracom S.A. , panto@intracom.gr
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CODEC test
+ *
+ * This test verifies the connection and performs a memory test
+ * on any connected codec(s). The meat of the work is done
+ * in the board specific function.
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_CODEC
+
+extern int board_post_codec(int flags);
+
+int codec_post_test (int flags)
+{
+ return board_post_codec(flags);
+}
+
+#endif /* CONFIG_POST & CFG_POST_CODEC */
+#endif /* CONFIG_POST */
diff --git a/post/tests.c b/post/tests.c
index bce53302e68..3bccd1a8edd 100644
--- a/post/tests.c
+++ b/post/tests.c
@@ -44,6 +44,7 @@ extern int usb_post_test (int flags);
extern int spr_post_test (int flags);
extern int sysmon_post_test (int flags);
extern int dsp_post_test (int flags);
+extern int codec_post_test (int flags);
extern int sysmon_init_f (void);
@@ -209,6 +210,18 @@ struct post_test post_list[] =
CFG_POST_DSP
},
#endif
+#if CONFIG_POST & CFG_POST_DSP
+ {
+ "CODEC test",
+ "codec",
+ "This test checks any connected codec(s).",
+ POST_RAM | POST_MANUAL,
+ &codec_post_test,
+ NULL,
+ NULL,
+ CFG_POST_CODEC
+ },
+#endif
};
unsigned int post_list_size = sizeof (post_list) / sizeof (struct post_test);
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-13 01:26:38 +0000