diff options
-rw-r--r-- | board/trab/auto_update.c | 148 | ||||
-rw-r--r-- | common/devices.c | 2 | ||||
-rw-r--r-- | include/configs/sbc8260.h | 2 |
3 files changed, 111 insertions, 41 deletions
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c index da3b71c77ff..9559d5e04e3 100644 --- a/board/trab/auto_update.c +++ b/board/trab/auto_update.c @@ -202,6 +202,7 @@ extern int transfer_pic(unsigned char, unsigned char *, int, int); /* change char* to void* to shutup the compiler */ extern int i2c_write_multiple (uchar, uint, int, void *, int); extern int i2c_read_multiple (uchar, uint, int, void *, int); +extern block_dev_desc_t *get_dev (char*, int); int au_check_valid(int idx, long nbytes) @@ -220,68 +221,72 @@ au_check_valid(int idx, long nbytes) printf("type %#x %#x ", hdr->ih_type, IH_TYPE_KERNEL); #endif if (ntohl(hdr->ih_magic) != IH_MAGIC || - hdr->ih_arch != IH_CPU_ARM || - nbytes < ntohl(hdr->ih_size)) { - printf ("Image %s bad MAGIC or ARCH or SIZE\n", aufile[idx]); - return -1; + hdr->ih_arch != IH_CPU_ARM || + nbytes < ntohl(hdr->ih_size)) + { + printf ("Image %s bad MAGIC or ARCH or SIZE\n", aufile[idx]); + return -1; } /* check the hdr CRC */ checksum = ntohl(hdr->ih_hcrc); hdr->ih_hcrc = 0; if (crc32 (0, (char *)hdr, sizeof(*hdr)) != checksum) { - printf ("Image %s bad header checksum\n", aufile[idx]); - return -1; + printf ("Image %s bad header checksum\n", aufile[idx]); + return -1; } + hdr->ih_hcrc = htonl(checksum); /* check the data CRC */ checksum = ntohl(hdr->ih_dcrc); if (crc32 (0, (char *)(LOAD_ADDR + sizeof(*hdr)), ntohl(hdr->ih_size)) != checksum) { - printf ("Image %s bad data checksum\n", aufile[idx]); - return -1; + printf ("Image %s bad data checksum\n", aufile[idx]); + return -1; } /* check the type - could do this all in one gigantic if() */ if ((idx == IDX_FIRMWARE) && (hdr->ih_type != IH_TYPE_FIRMWARE)) { - printf ("Image %s wrong type\n", aufile[idx]); - return -1; + printf ("Image %s wrong type\n", aufile[idx]); + return -1; } if ((idx == IDX_KERNEL) && (hdr->ih_type != IH_TYPE_KERNEL)) { - printf ("Image %s wrong type\n", aufile[idx]); - return -1; + printf ("Image %s wrong type\n", aufile[idx]); + return -1; } if ((idx == IDX_DISK || idx == IDX_APP) && (hdr->ih_type != IH_TYPE_RAMDISK)) { - printf ("Image %s wrong type\n", aufile[idx]); - return -1; + printf ("Image %s wrong type\n", aufile[idx]); + return -1; } if ((idx == IDX_PREPARE || idx == IDX_PREINST || idx == IDX_POSTINST) && (hdr->ih_type != IH_TYPE_SCRIPT)) { - printf ("Image %s wrong type\n", aufile[idx]); - return -1; + printf ("Image %s wrong type\n", aufile[idx]); + return -1; } /* special case for prepare.img */ if (idx == IDX_PREPARE) return 0; /* check the size does not exceed space in flash */ if ((ausize[idx] != 0) && (ausize[idx] < ntohl(hdr->ih_size))) { - printf ("Image %s is bigger than FLASH\n", aufile[idx]); - return -1; + printf ("Image %s is bigger than FLASH\n", aufile[idx]); + return -1; } /* check the time stamp from the EEPROM */ /* read it in */ i2c_read_multiple(0x54, auee_off[idx].time, 1, buf, sizeof(buf)); #ifdef CHECK_VALID_DEBUG -printf("buf[0] %#x buf[1] %#x buf[2] %#x buf[3] %#x as int %#x time %#x\n", -buf[0], buf[1], buf[2], buf[3], *((unsigned int *)buf), ntohl(hdr->ih_time)); + printf ("buf[0] %#x buf[1] %#x buf[2] %#x buf[3] %#x " + "as int %#x time %#x\n", + buf[0], buf[1], buf[2], buf[3], + *((unsigned int *)buf), ntohl(hdr->ih_time)); #endif /* check it */ if (*((unsigned int *)buf) >= ntohl(hdr->ih_time)) { - printf ("Image %s is too old\n", aufile[idx]); - return -1; + printf ("Image %s is too old\n", aufile[idx]); + return -1; } return 0; @@ -292,7 +297,7 @@ buf[0], buf[1], buf[2], buf[3], *((unsigned int *)buf), ntohl(hdr->ih_time)); #define POWER_OFF (1 << 1) int -au_do_update(int idx, long sz) +au_do_update(int idx, long sz, int repeat) { image_header_t *hdr; char *addr; @@ -332,12 +337,17 @@ au_do_update(int idx, long sz) FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP); } - /* erase the address range */ - debug ("erase %lx %lx\n", start, end); - sprintf(strbuf, "erase %lx %lx\n", start, end); - parse_string_outer(strbuf, - FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP); - + /* + * erase the address range. Multiple erases seem to cause + * problems. + */ + if (repeat == 0) { + debug ("erase %lx %lx\n", start, end); + sprintf(strbuf, "erase %lx %lx\n", start, end); + parse_string_outer(strbuf, + FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP); + } + wait_ms(100); /* strip the header - except for the kernel */ if (idx == IDX_FIRMWARE || idx == IDX_DISK || idx == IDX_APP) { addr = (char *)((char *)hdr + sizeof(*hdr)); @@ -361,16 +371,15 @@ au_do_update(int idx, long sz) FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP); /* check the dcrc of the copy */ - if (crc32 (0, (char *)(start + off), ntohl(hdr->ih_size)) - != ntohl(hdr->ih_dcrc)) { - printf ("Image %s Bad Data Checksum After COPY\n", aufile[idx]); - return -1; + if (crc32 (0, (char *)(start + off), ntohl(hdr->ih_size)) != ntohl(hdr->ih_dcrc)) { + printf ("Image %s Bad Data Checksum After COPY\n", aufile[idx]); + return -1; } /* protect the address range */ /* this assumes that ONLY the firmware is protected! */ if (idx == IDX_FIRMWARE) { - printf("protect on %lx %lx\n", start, end); + debug ("protect on %lx %lx\n", start, end); sprintf(strbuf, "protect on %lx %lx\n", start, end); parse_string_outer(strbuf, FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP); @@ -413,8 +422,9 @@ do_auto_update(void) { block_dev_desc_t *stor_dev; long sz; - int i, res, bitmap_first, cnt; + int i, res, bitmap_first, cnt, old_ctrlc, got_ctrlc; char *env; + long start, end; #undef ERASE_EEPROM #ifdef ERASE_EEPROM @@ -442,8 +452,8 @@ do_auto_update(void) return -1; } /* check whether it has a partition table */ - stor_dev = usb_stor_get_dev(au_usb_stor_curr_dev); - if (stor_dev->type == DEV_TYPE_UNKNOWN) { + stor_dev = get_dev("usb", 0); + if (stor_dev == NULL) { debug ("uknown device type\n"); return -1; } @@ -471,6 +481,49 @@ do_auto_update(void) ausize[IDX_KERNEL] = (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST; ausize[IDX_APP] = (AU_FL_APP_ND + 1) - AU_FL_APP_ST; ausize[IDX_DISK] = (AU_FL_DISK_ND + 1) - AU_FL_DISK_ST; + /* + * now check whether start and end are defined using environment + * variables. + */ + start = end = 0; + env = getenv("firmware_st"); + if (env != NULL) + start = simple_strtoul(env, NULL, 16); + env = getenv("firmware_nd"); + if (env != NULL) + end = simple_strtoul(env, NULL, 16); + if (start && end && end > start) + ausize[IDX_FIRMWARE] = (end + 1) - start; + start = end = 0; + env = getenv("kernel_st"); + if (env != NULL) + start = simple_strtoul(env, NULL, 16); + env = getenv("kernel_nd"); + if (env != NULL) + end = simple_strtoul(env, NULL, 16); + if (start && end && end > start) + ausize[IDX_KERNEL] = (end + 1) - start; + start = end = 0; + env = getenv("app_st"); + if (env != NULL) + start = simple_strtoul(env, NULL, 16); + env = getenv("app_nd"); + if (env != NULL) + end = simple_strtoul(env, NULL, 16); + if (start && end && end > start) + ausize[IDX_APP] = (end + 1) - start; + start = end = 0; + env = getenv("disk_st"); + if (env != NULL) + start = simple_strtoul(env, NULL, 16); + env = getenv("disk_nd"); + if (env != NULL) + end = simple_strtoul(env, NULL, 16); + if (start && end && end > start) + ausize[IDX_DISK] = (end + 1) - start; + /* make sure that we see CTRL-C and save the old state */ + old_ctrlc = disable_ctrlc(0); + bitmap_first = 0; /* just loop thru all the possible files */ for (i = 0; i < AU_MAXFILES; i++) { @@ -509,18 +562,33 @@ do_auto_update(void) /* this is really not a good idea, but it's what the */ /* customer wants. */ cnt = 0; + got_ctrlc = 0; do { - res = au_do_update(i, sz); -#ifdef AU_TEST_ONLY + res = au_do_update(i, sz, cnt); + /* let the user break out of the loop */ + if (ctrlc() || had_ctrlc()) { + clear_ctrlc(); + if (res < 0) + got_ctrlc = 1; + break; + } cnt++; +#ifdef AU_TEST_ONLY } while (res < 0 && cnt < 3); if (cnt < 3) #else } while (res < 0); #endif - au_update_eeprom(i); + /* + * it doesn't make sense to update the EEPROM if the + * update was interrupted by the user due to errors. + */ + if (got_ctrlc == 0) + au_update_eeprom(i); } usb_stop(); + /* restore the old state */ + disable_ctrlc(old_ctrlc); return 0; } #endif /* CONFIG_AUTO_UPDATE */ diff --git a/common/devices.c b/common/devices.c index 7b4a1cd81fe..bf7486ac442 100644 --- a/common/devices.c +++ b/common/devices.c @@ -159,6 +159,8 @@ int device_deregister(char *devname) int devices_init (void) { #ifndef CONFIG_ARM /* already relocated for current ARM implementation */ + DECLARE_GLOBAL_DATA_PTR; + ulong relocation_offset = gd->reloc_off; int i; diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index 82a8de97887..ef96e727717 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -419,7 +419,7 @@ */ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ CONFIG_BOOTP_BOOTFILESIZE | \ - CONFIG_BOOTP_DNS | \ + CONFIG_BOOTP_DNS | \ CONFIG_BOOTP_DNS2 | \ CONFIG_BOOTP_SEND_HOSTNAME) |