diff options
| -rw-r--r-- | lib_blackfin/string.c | 19 |
1 files changed, 11 insertions, 8 deletions
diff --git a/lib_blackfin/string.c b/lib_blackfin/string.c index 36eecdff4c5..e4587184465 100644 --- a/lib_blackfin/string.c +++ b/lib_blackfin/string.c @@ -136,6 +136,14 @@ int strncmp(const char *cs, const char *ct, size_t count) */ void dma_memcpy_nocache(void *dst, const void *src, size_t count) { + /* Disable DMA in case it's still running (older u-boot's did not + * always turn them off). Do it before the if statement below so + * we can be cheap and not do a SSYNC() due to the forced abort. + */ + bfin_write_MDMA_D0_CONFIG(0); + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); + /* Scratchpad cannot be a DMA source or destination */ if (((unsigned long)src >= L1_SRAM_SCRATCH && (unsigned long)src < L1_SRAM_SCRATCH_END) || @@ -143,10 +151,6 @@ void dma_memcpy_nocache(void *dst, const void *src, size_t count) (unsigned long)dst < L1_SRAM_SCRATCH_END)) hang(); - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); - /* Copy sram functions from sdram to sram */ /* Setup destination start address */ bfin_write_MDMA_D0_START_ADDR(dst); @@ -164,14 +168,13 @@ void dma_memcpy_nocache(void *dst, const void *src, size_t count) /* Enable source DMA */ bfin_write_MDMA_S0_CONFIG(DMAEN); - - bfin_write_MDMA_D0_CONFIG(WNR | DMAEN); + bfin_write_MDMA_D0_CONFIG(WNR | DMAEN | DI_EN); SSYNC(); - while (bfin_read_MDMA_D0_IRQ_STATUS() & DMA_RUN) + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) continue; - bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | DMA_RUN | DMA_DONE | DMA_ERR); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); bfin_write_MDMA_D0_CONFIG(0); bfin_write_MDMA_S0_CONFIG(0); } |