diff options
115 files changed, 208 insertions, 210 deletions
diff --git a/CHANGELOG b/CHANGELOG index 5ccee97257b..1136f11f7ac 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,10 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Prepare for SoC rework of ARM code: + - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL + - rename memsetup into lowlevel_init (function name and source files) + * Fix problems with SNTP support; enable SNTP support in some boards. @@ -2128,6 +2128,15 @@ Low Level (hardware related) configuration options: This only takes effect if the memory commands are activated globally (CFG_CMD_MEM). +- CONFIG_INIT_CRITICAL + [ARM only] If this variable is NOT defined, then + certain critical initializations (like setting up the + memory controller) are omitted. Normally this + variable MUST be defined for all boards. The only + exception is when U-Boot is loaded (to RAM) by some + other boot loader or by a debugger which performs + these intializations itself. + Building the Software: ====================== diff --git a/board/assabet/setup.S b/board/assabet/setup.S index fefb431af20..56ea0dd9284 100644 --- a/board/assabet/setup.S +++ b/board/assabet/setup.S @@ -80,8 +80,8 @@ BCR_DB1110: .long ASSABET_BCR_DB1110 LEDS: .long NEPONSET_LEDS - .globl memsetup -memsetup: + .globl lowlevel_init +lowlevel_init: /* Setting up the memory and stuff */ diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile index 3ab97dfdc0c..83e3ba458ad 100644 --- a/board/cerf250/Makefile +++ b/board/cerf250/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := cerf250.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/cerf250/memsetup.S b/board/cerf250/lowlevel_init.S index f3d373a8a24..c9b68d7ff39 100644 --- a/board/cerf250/memsetup.S +++ b/board/cerf250/lowlevel_init.S @@ -3,7 +3,7 @@ * * NOTE: I haven't clean this up considerably, just enough to get it * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is + * board/cradle/lowlevel_init.S for another PXA250 setup that is * much cleaner. * * See file CREDITS for list of people who contributed to this @@ -43,8 +43,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE * Memory setup */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: /* Set up GPIO pins first ----------------------------------------- */ @@ -403,9 +403,9 @@ initclks: #endif /* ---------------------------------------------------------------- */ - /* End memsetup */ + /* End lowlevel_init */ /* ---------------------------------------------------------------- */ -endmemsetup: +endlowlevel_init: mov pc, lr diff --git a/board/cradle/Makefile b/board/cradle/Makefile index 5a321eb3939..265d50043ca 100644 --- a/board/cradle/Makefile +++ b/board/cradle/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := cradle.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/cradle/memsetup.S b/board/cradle/lowlevel_init.S index 8800cb0cb72..2fd307f1d0e 100644 --- a/board/cradle/memsetup.S +++ b/board/cradle/lowlevel_init.S @@ -43,8 +43,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE .endm -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr @@ -512,4 +512,4 @@ mem_init: mov pc, r10 -@ End memsetup +@ End lowlevel_init diff --git a/board/csb226/Makefile b/board/csb226/Makefile index ac94642453d..5b311a9450d 100644 --- a/board/csb226/Makefile +++ b/board/csb226/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := csb226.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/logodl/memsetup.S b/board/csb226/lowlevel_init.S index 68577ca0699..aa9dcba6fc4 100644 --- a/board/logodl/memsetup.S +++ b/board/csb226/lowlevel_init.S @@ -3,7 +3,7 @@ * * NOTE: I haven't clean this up considerably, just enough to get it * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is + * board/cradle/lowlevel_init.S for another PXA250 setup that is * much cleaner. * * See file CREDITS for list of people who contributed to this @@ -46,8 +46,8 @@ _TEXT_BASE: * Memory setup */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr @@ -429,9 +429,9 @@ initclks: #endif /* ---------------------------------------------------------------- */ - /* End memsetup */ + /* End lowlevel_init */ /* ---------------------------------------------------------------- */ -endmemsetup: +endlowlevel_init: mov pc, lr diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile index c0c3f6785b4..548fd528ba1 100644 --- a/board/dave/B2/Makefile +++ b/board/dave/B2/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := B2.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/dave/B2/memsetup.S b/board/dave/B2/lowlevel_init.S index 3f64cb3749b..2f3a3645ed6 100644 --- a/board/dave/B2/memsetup.S +++ b/board/dave/B2/lowlevel_init.S @@ -149,8 +149,8 @@ MEMORY_CONFIG: .word 0x20 /*MRSR7*/ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: /* the next instruction fail due memory relocation... diff --git a/board/dbau1x00/Makefile b/board/dbau1x00/Makefile index d1cdc6b9244..d9b0e2d258a 100644 --- a/board/dbau1x00/Makefile +++ b/board/dbau1x00/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS = $(BOARD).o flash.o -SOBJS = memsetup.o +SOBJS = lowlevel_init.o $(LIB): .depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/dbau1x00/memsetup.S b/board/dbau1x00/lowlevel_init.S index c96d8a50996..7afd5840c86 100644 --- a/board/dbau1x00/memsetup.S +++ b/board/dbau1x00/lowlevel_init.S @@ -16,8 +16,8 @@ .set noreorder .set mips32 - .globl memsetup -memsetup: + .globl lowlevel_init +lowlevel_init: /* * Step 1) Establish CPU endian mode. * Db1500-specific: diff --git a/board/dnp1110/Makefile b/board/dnp1110/Makefile index 31ef6954cdc..eaa38bc3c13 100644 --- a/board/dnp1110/Makefile +++ b/board/dnp1110/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := dnp1110.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/dnp1110/memsetup.S b/board/dnp1110/lowlevel_init.S index 1622aea5044..7730be34379 100644 --- a/board/dnp1110/memsetup.S +++ b/board/dnp1110/lowlevel_init.S @@ -63,8 +63,8 @@ smcnfg: .long 0x00000000 /* setting up the memory */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: ldr r0, MEM_BASE diff --git a/board/ep7312/Makefile b/board/ep7312/Makefile index 2b4c975b8e8..c53a3c7a0d6 100644 --- a/board/ep7312/Makefile +++ b/board/ep7312/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := ep7312.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/ep7312/memsetup.S b/board/ep7312/lowlevel_init.S index 6078937b4cd..5dadb313b1b 100644 --- a/board/ep7312/memsetup.S +++ b/board/ep7312/lowlevel_init.S @@ -45,8 +45,8 @@ sdrfpr_val: .long 0x00000240 sdconf_val: .long 0x00000522 /* setting up the memory */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: /* * SYSCON1-3 */ diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile index 1ab4dfb368c..10850a95e47 100644 --- a/board/evb4510/Makefile +++ b/board/evb4510/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := evb4510.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/evb4510/memsetup.S b/board/evb4510/lowlevel_init.S index 915af1e9e60..7184d7259a5 100644 --- a/board/evb4510/memsetup.S +++ b/board/evb4510/lowlevel_init.S @@ -31,7 +31,7 @@ * * This memory map allows us to relocate from FLASH to SRAM. After * power-on reset the CPU only knows about the FLASH memory at address - * 0x00000000. After memsetup completes the memory map will be: + * 0x00000000. After lowlevel_init completes the memory map will be: * * Memory Addr * 0x00000000 @@ -54,8 +54,8 @@ * ***********************************************************************/ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: /* preserve the temp register (r12 AKA ip) and remap it. */ ldr r1, =SRAM_BASE+0xC diff --git a/board/gcplus/Makefile b/board/gcplus/Makefile index d0f7d1cffaf..1954d661c3d 100644 --- a/board/gcplus/Makefile +++ b/board/gcplus/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := gcplus.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/gcplus/memsetup.S b/board/gcplus/lowlevel_init.S index 02f56858244..f292c4d28ab 100644 --- a/board/gcplus/memsetup.S +++ b/board/gcplus/lowlevel_init.S @@ -29,11 +29,11 @@ #include "version.h" - .globl memsetup -memsetup: + .globl lowlevel_init +lowlevel_init: /* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory init for us. * However the darn thing leaves the MMU enabled before handing control - * over to us. So we need to disable the MMU and we use memsetup + * over to us. So we need to disable the MMU and we use lowlevel_init * to do it. */ diff --git a/board/impa7/Makefile b/board/impa7/Makefile index f8323e0b97f..08543f94f22 100644 --- a/board/impa7/Makefile +++ b/board/impa7/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := impa7.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/impa7/memsetup.S b/board/impa7/lowlevel_init.S index 5cb5fa899d2..7ce10a20195 100644 --- a/board/impa7/memsetup.S +++ b/board/impa7/lowlevel_init.S @@ -39,8 +39,8 @@ memcfg2_val: .long 0x00000000 @ upper 16 bits are reserved for CS7 + CS6 drfpr_val: .long 0x00000081 /* setting up the memory */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: /* * DRFPR * 64kHz DRAM refresh diff --git a/board/incaip/Makefile b/board/incaip/Makefile index d1cdc6b9244..d9b0e2d258a 100644 --- a/board/incaip/Makefile +++ b/board/incaip/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS = $(BOARD).o flash.o -SOBJS = memsetup.o +SOBJS = lowlevel_init.o $(LIB): .depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/incaip/memsetup.S b/board/incaip/lowlevel_init.S index 3f883c110a0..fb64ef419de 100644 --- a/board/incaip/memsetup.S +++ b/board/incaip/lowlevel_init.S @@ -269,9 +269,9 @@ sdram_init: .end sdram_init - .globl memsetup - .ent memsetup -memsetup: + .globl lowlevel_init + .ent lowlevel_init +lowlevel_init: /* EBU, CGU and SDRAM Initialization. */ @@ -292,4 +292,4 @@ memsetup: j ra nop - .end memsetup + .end lowlevel_init diff --git a/board/innokom/Makefile b/board/innokom/Makefile index 59eaee58b1c..73f6a744279 100644 --- a/board/innokom/Makefile +++ b/board/innokom/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := innokom.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/csb226/memsetup.S b/board/innokom/lowlevel_init.S index 68577ca0699..aa9dcba6fc4 100644 --- a/board/csb226/memsetup.S +++ b/board/innokom/lowlevel_init.S @@ -3,7 +3,7 @@ * * NOTE: I haven't clean this up considerably, just enough to get it * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is + * board/cradle/lowlevel_init.S for another PXA250 setup that is * much cleaner. * * See file CREDITS for list of people who contributed to this @@ -46,8 +46,8 @@ _TEXT_BASE: * Memory setup */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr @@ -429,9 +429,9 @@ initclks: #endif /* ---------------------------------------------------------------- */ - /* End memsetup */ + /* End lowlevel_init */ /* ---------------------------------------------------------------- */ -endmemsetup: +endlowlevel_init: mov pc, lr diff --git a/board/lart/Makefile b/board/lart/Makefile index 42ceb03b7af..550aa1dac3b 100644 --- a/board/lart/Makefile +++ b/board/lart/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := lart.o flash.o -SOBJS := flashasm.o memsetup.o +SOBJS := flashasm.o lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/lart/memsetup.S b/board/lart/lowlevel_init.S index 635f2a001a5..db9fd63defc 100644 --- a/board/lart/memsetup.S +++ b/board/lart/lowlevel_init.S @@ -53,8 +53,8 @@ mecr: .long 0x00060006 /* setting up the memory */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: ldr r0, MEM_BASE /* Setup the flash memory */ diff --git a/board/logodl/Makefile b/board/logodl/Makefile index b635322a810..c7cde7d5790 100644 --- a/board/logodl/Makefile +++ b/board/logodl/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := logodl.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/innokom/memsetup.S b/board/logodl/lowlevel_init.S index 68577ca0699..aa9dcba6fc4 100644 --- a/board/innokom/memsetup.S +++ b/board/logodl/lowlevel_init.S @@ -3,7 +3,7 @@ * * NOTE: I haven't clean this up considerably, just enough to get it * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is + * board/cradle/lowlevel_init.S for another PXA250 setup that is * much cleaner. * * See file CREDITS for list of people who contributed to this @@ -46,8 +46,8 @@ _TEXT_BASE: * Memory setup */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr @@ -429,9 +429,9 @@ initclks: #endif /* ---------------------------------------------------------------- */ - /* End memsetup */ + /* End lowlevel_init */ /* ---------------------------------------------------------------- */ -endmemsetup: +endlowlevel_init: mov pc, lr diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile index f0999d17381..ebe14df1b61 100644 --- a/board/lpd7a40x/Makefile +++ b/board/lpd7a40x/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := lpd7a40x.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/lpd7a40x/memsetup.S b/board/lpd7a40x/lowlevel_init.S index d4e6c6a0e1d..b3ed55ce35e 100644 --- a/board/lpd7a40x/memsetup.S +++ b/board/lpd7a40x/lowlevel_init.S @@ -131,8 +131,8 @@ _TEXT_BASE: .word TEXT_BASE -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r9, lr @ save return address /* memory control configuration */ diff --git a/board/lubbock/Makefile b/board/lubbock/Makefile index 0e29e7be7aa..106622cf587 100644 --- a/board/lubbock/Makefile +++ b/board/lubbock/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := lubbock.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/lubbock/memsetup.S b/board/lubbock/lowlevel_init.S index dc0b7be024b..15276e89d01 100644 --- a/board/lubbock/memsetup.S +++ b/board/lubbock/lowlevel_init.S @@ -3,7 +3,7 @@ * * NOTE: I haven't clean this up considerably, just enough to get it * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is + * board/cradle/lowlevel_init.S for another PXA250 setup that is * much cleaner. * * See file CREDITS for list of people who contributed to this @@ -43,8 +43,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE * Memory setup */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr @@ -403,9 +403,9 @@ initclks: #endif /* ---------------------------------------------------------------- */ - /* End memsetup */ + /* End lowlevel_init */ /* ---------------------------------------------------------------- */ -endmemsetup: +endlowlevel_init: mov pc, lr diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile index 7dbcc1c9378..ab2c376ff46 100644 --- a/board/modnet50/Makefile +++ b/board/modnet50/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := modnet50.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/modnet50/memsetup.S b/board/modnet50/lowlevel_init.S index 674b1d2e058..c98c1554582 100644 --- a/board/modnet50/memsetup.S +++ b/board/modnet50/lowlevel_init.S @@ -51,8 +51,8 @@ #define NETARM_MMAP_CS4_MASK (~(PHYS_EXT_SIZE - 1)) /* setting up the memory */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: #if defined(CONFIG_MODNET50) ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - TEXT_BASE) @@ -187,7 +187,7 @@ memsetup_cs3: #endif /* CONFIG_MODNET50 */ -memsetup_end: +lowlevel_init_end: /* * manipulate address in lr and ip to match new * address space diff --git a/board/mpl/vcma9/Makefile b/board/mpl/vcma9/Makefile index f9b78f947d9..304c965d12b 100644 --- a/board/mpl/vcma9/Makefile +++ b/board/mpl/vcma9/Makefile @@ -28,7 +28,7 @@ LIB = lib$(BOARD).a OBJS := vcma9.o flash.o cmd_vcma9.o OBJS += ../common/common_util.o ../common/memtst.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/mpl/vcma9/memsetup.S b/board/mpl/vcma9/lowlevel_init.S index 98aec3db4df..a02335314bb 100644 --- a/board/mpl/vcma9/memsetup.S +++ b/board/mpl/vcma9/lowlevel_init.S @@ -130,8 +130,8 @@ _TEXT_BASE: .word TEXT_BASE -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: /* memory control configuration */ /* make r0 relative the current location so that it */ /* reads SMRDATA out of FLASH rather than memory ! */ diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile index 72f850d9cec..3e805feb404 100644 --- a/board/mx1ads/Makefile +++ b/board/mx1ads/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := mx1ads.o syncflash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/mx1ads/memsetup.S b/board/mx1ads/lowlevel_init.S index 1b06fa3c4d4..09c260d64dc 100644 --- a/board/mx1ads/memsetup.S +++ b/board/mx1ads/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * board/mx1ads/memsetup.S + * board/mx1ads/lowlevel_init.S * * (c) Copyright 2004 * Techware Information Technology, Inc. @@ -33,8 +33,8 @@ _TEXT_BASE: .word TEXT_BASE -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: /* memory controller init */ ldr r1, =SDCTL0 diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile index 86aef5c3da8..9e3bca14cd9 100644 --- a/board/mx1fs2/Makefile +++ b/board/mx1fs2/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := mx1fs2.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/mx1fs2/memsetup.S b/board/mx1fs2/lowlevel_init.S index 5ec751b73dd..8211beb3f88 100644 --- a/board/mx1fs2/memsetup.S +++ b/board/mx1fs2/lowlevel_init.S @@ -22,8 +22,8 @@ #include <version.h> #include <asm/arch/imx-regs.h> -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr diff --git a/board/pleb2/Makefile b/board/pleb2/Makefile index 5fdc874dfe2..95d9170b240 100644 --- a/board/pleb2/Makefile +++ b/board/pleb2/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := pleb2.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/pleb2/memsetup.S b/board/pleb2/lowlevel_init.S index f2e1ce9d431..add2c531ab2 100644 --- a/board/pleb2/memsetup.S +++ b/board/pleb2/lowlevel_init.S @@ -33,8 +33,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE sub pc,pc,#4 .endm -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr @@ -485,4 +485,4 @@ mem_init: mov pc, r10 -@ End memsetup +@ End lowlevel_init diff --git a/board/purple/Makefile b/board/purple/Makefile index a9463b62157..b2f2fc0fd35 100644 --- a/board/purple/Makefile +++ b/board/purple/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS = $(BOARD).o flash.o sconsole.o -SOBJS = memsetup.o +SOBJS = lowlevel_init.o $(LIB): .depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/purple/memsetup.S b/board/purple/lowlevel_init.S index d532ceba827..668124a784d 100644 --- a/board/purple/memsetup.S +++ b/board/purple/lowlevel_init.S @@ -28,8 +28,8 @@ #define MC_IOGP 0xBF800800 - .globl memsetup -memsetup: + .globl lowlevel_init +lowlevel_init: li t0, MC_IOGP li t1, 0xf24 sw t1, 0(t0) diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds index 6263dd00529..aeea5d475e4 100644 --- a/board/purple/u-boot.lds +++ b/board/purple/u-boot.lds @@ -35,7 +35,7 @@ SECTIONS .text : { cpu/mips/start.o (.text) - board/purple/memsetup.o (.text) + board/purple/lowlevel_init.o (.text) cpu/mips/cache.o (.text) common/main.o (.text) common/dlmalloc.o (.text) diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile index 212efcc4e55..5dc3fd4e476 100644 --- a/board/scb9328/Makefile +++ b/board/scb9328/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := scb9328.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/scb9328/memsetup.S b/board/scb9328/lowlevel_init.S index be5650a45f7..ba3b6d24183 100644 --- a/board/scb9328/memsetup.S +++ b/board/scb9328/lowlevel_init.S @@ -22,8 +22,8 @@ #include <version.h> #include <asm/arch/imx-regs.h> -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr diff --git a/board/shannon/Makefile b/board/shannon/Makefile index 86098a3053a..f66b096a4f7 100644 --- a/board/shannon/Makefile +++ b/board/shannon/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := shannon.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/shannon/memsetup.S b/board/shannon/lowlevel_init.S index a9a8777d372..0655c42d3be 100644 --- a/board/shannon/memsetup.S +++ b/board/shannon/lowlevel_init.S @@ -51,8 +51,8 @@ mecr: .long 0x7fff7fff @ 01000000 /* setting up the memory */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: ldr r0, MEM_BASE /* Setup the flash memory */ diff --git a/board/smdk2400/Makefile b/board/smdk2400/Makefile index 367eabddbfe..fc3d48faeea 100644 --- a/board/smdk2400/Makefile +++ b/board/smdk2400/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := smdk2400.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/smdk2400/memsetup.S b/board/smdk2400/lowlevel_init.S index b507d812595..a5de806af55 100644 --- a/board/smdk2400/memsetup.S +++ b/board/smdk2400/lowlevel_init.S @@ -125,8 +125,8 @@ _TEXT_BASE: .word TEXT_BASE -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: /* memory control configuration */ /* make r0 relative the current location so that it */ /* reads SMRDATA out of FLASH rather than memory ! */ diff --git a/board/smdk2410/Makefile b/board/smdk2410/Makefile index af1e6e677e8..4ee21f5977a 100644 --- a/board/smdk2410/Makefile +++ b/board/smdk2410/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := smdk2410.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/smdk2410/memsetup.S b/board/smdk2410/lowlevel_init.S index c00e772ff89..310f2a0a94a 100644 --- a/board/smdk2410/memsetup.S +++ b/board/smdk2410/lowlevel_init.S @@ -129,8 +129,8 @@ _TEXT_BASE: .word TEXT_BASE -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: /* memory control configuration */ /* make r0 relative the current location so that it */ /* reads SMRDATA out of FLASH rather than memory ! */ diff --git a/board/tb0229/Makefile b/board/tb0229/Makefile index e7bb8cbe50d..4375073af9b 100644 --- a/board/tb0229/Makefile +++ b/board/tb0229/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS = $(BOARD).o flash.o vr4131-pci.o -SOBJS = memsetup.o +SOBJS = lowlevel_init.o $(LIB): .depend $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/tb0229/memsetup.S b/board/tb0229/lowlevel_init.S index 0eaf45dd59f..df318067b93 100644 --- a/board/tb0229/memsetup.S +++ b/board/tb0229/lowlevel_init.S @@ -14,8 +14,8 @@ #include <asm/regdef.h> - .globl memsetup -memsetup: + .globl lowlevel_init +lowlevel_init: /* BCUCNTREG1 = 0x0040 */ la t0, 0xaf000000 diff --git a/board/trab/Makefile b/board/trab/Makefile index 4e6e9d68cb1..ced9bc5bc8f 100644 --- a/board/trab/Makefile +++ b/board/trab/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) diff --git a/board/trab/memsetup.S b/board/trab/lowlevel_init.S index c93dff67062..128ae7e4aa5 100644 --- a/board/trab/memsetup.S +++ b/board/trab/lowlevel_init.S @@ -140,8 +140,8 @@ _TEXT_BASE: .word TEXT_BASE -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: /* memory control configuration */ /* make r0 relative the current location so that it */ /* reads SMRDATA out of FLASH rather than memory ! */ diff --git a/board/wepep250/Makefile b/board/wepep250/Makefile index 802ccb950fb..11ad8fbeccd 100644 --- a/board/wepep250/Makefile +++ b/board/wepep250/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := wepep250.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/wepep250/memsetup.S b/board/wepep250/lowlevel_init.S index 26fc0eaf254..b172ceaa614 100644 --- a/board/wepep250/memsetup.S +++ b/board/wepep250/lowlevel_init.S @@ -35,8 +35,8 @@ #include <version.h> #include <asm/arch/pxa-regs.h> -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile index da5a5bad3be..7c5f0cd1a1f 100644 --- a/board/xaeniax/Makefile +++ b/board/xaeniax/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := xaeniax.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/xaeniax/memsetup.S b/board/xaeniax/lowlevel_init.S index 5c43b85ad41..fe3e7128a4b 100644 --- a/board/xaeniax/memsetup.S +++ b/board/xaeniax/lowlevel_init.S @@ -3,7 +3,7 @@ * * NOTE: I haven't clean this up considerably, just enough to get it * running. See hal_platform_setup.h for the source. See - * board/cradle/memsetup.S for another PXA250 setup that is + * board/cradle/lowlevel_init.S for another PXA250 setup that is * much cleaner. * * See file CREDITS for list of people who contributed to this @@ -39,8 +39,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE .endm -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr @@ -416,9 +416,9 @@ test: #endif /* ---------------------------------------------------------------- */ - /* End memsetup */ + /* End lowlevel_init */ /* ---------------------------------------------------------------- */ -endmemsetup: +endlowlevel_init: mov pc, lr diff --git a/board/xm250/Makefile b/board/xm250/Makefile index 3572f726837..1b0a3f0178f 100644 --- a/board/xm250/Makefile +++ b/board/xm250/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := xm250.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $^ diff --git a/board/xm250/memsetup.S b/board/xm250/lowlevel_init.S index f68e8433930..2ebd39554a1 100644 --- a/board/xm250/memsetup.S +++ b/board/xm250/lowlevel_init.S @@ -43,8 +43,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE .endm */ -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr @@ -516,4 +516,4 @@ mem_init: mov pc, r10 -@ End memsetup +@ End lowlevel_init diff --git a/board/xsengine/Makefile b/board/xsengine/Makefile index 591b728de15..ed1464af3e9 100644 --- a/board/xsengine/Makefile +++ b/board/xsengine/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a OBJS := xsengine.o flash.o -SOBJS := memsetup.o +SOBJS := lowlevel_init.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) $(SOBJS) diff --git a/board/xsengine/memsetup.S b/board/xsengine/lowlevel_init.S index b94711846e0..309faabd921 100644 --- a/board/xsengine/memsetup.S +++ b/board/xsengine/lowlevel_init.S @@ -4,8 +4,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE -.globl memsetup -memsetup: +.globl lowlevel_init +lowlevel_init: mov r10, lr diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S index bde936a7517..0e15965df6b 100644 --- a/cpu/arm720t/start.S +++ b/cpu/arm720t/start.S @@ -316,10 +316,10 @@ cpu_init_crit: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependent, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ mov ip, lr - bl memsetup + bl lowlevel_init mov lr, ip mov pc, lr diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S index f3481936425..a7cabf8f321 100644 --- a/cpu/arm920t/start.S +++ b/cpu/arm920t/start.S @@ -257,10 +257,10 @@ cpu_init_crit: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ mov ip, lr - bl memsetup + bl lowlevel_init mov lr, ip mov pc, lr diff --git a/cpu/at91rm9200/lowlevel.S b/cpu/at91rm9200/lowlevel.S index 030f9e194a8..c8af7a602aa 100644 --- a/cpu/at91rm9200/lowlevel.S +++ b/cpu/at91rm9200/lowlevel.S @@ -30,7 +30,7 @@ #include <config.h> #include <version.h> -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL /* * some parameters for the board * @@ -197,4 +197,4 @@ SMRDATA1: .word SDRAM .word SDRAM_VAL /* SMRDATA1 is 176 bytes long */ -#endif /* CONFIG_BOOTBINFUNC */ +#endif /* CONFIG_INIT_CRITICAL */ diff --git a/cpu/at91rm9200/start.S b/cpu/at91rm9200/start.S index 0dbc0094a4a..e897e6b9c90 100644 --- a/cpu/at91rm9200/start.S +++ b/cpu/at91rm9200/start.S @@ -115,7 +115,7 @@ reset: orr r0,r0,#0xd3 /* was 13 */ msr cpsr,r0 -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL /* scratch stack */ ldr r1, =0x00204000 /* Insure word alignment */ @@ -141,7 +141,7 @@ reset: orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache orr r0, r0, #0xC0000000 @ set bits 31:30 (iA, nF) mcr p15, 0, r0, c1, c0, 0 @ write r0 in cp15 control register (cp15 r1) -#endif /* CONFIG_BOOTBINFUNC */ +#endif /* CONFIG_INIT_CRITICAL */ /* * relocate exeception table */ @@ -160,9 +160,7 @@ copyex: */ #ifdef CONFIG_INIT_CRITICAL bl cpu_init_crit -#endif -#ifdef CONFIG_BOOTBINFUNC relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ @@ -179,7 +177,7 @@ copy_loop: stmia r1!, {r3-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop -#endif /* CONFIG_BOOTBINFUNC */ +#endif /* CONFIG_INIT_CRITICAL */ /* Set up the stack */ stack_setup: diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S index 4f023a59fe9..5dca77363f9 100644 --- a/cpu/lh7a40x/start.S +++ b/cpu/lh7a40x/start.S @@ -229,10 +229,10 @@ cpu_init_crit: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ mov ip, lr - bl memsetup + bl lowlevel_init mov lr, ip mov pc, lr diff --git a/cpu/mips/start.S b/cpu/mips/start.S index 45a90a80fae..ff105a41840 100644 --- a/cpu/mips/start.S +++ b/cpu/mips/start.S @@ -243,7 +243,7 @@ reset: /* Initialize any external memory. */ - bal memsetup + bal lowlevel_init nop /* Initialize caches... diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S index d74f41ff383..da753a18dac 100644 --- a/cpu/pxa/start.S +++ b/cpu/pxa/start.S @@ -218,10 +218,10 @@ setspeed_done: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ mov ip, lr - bl memsetup + bl lowlevel_init mov lr, ip /* Memory interfaces are working. Disable MMU and enable I-cache. */ diff --git a/cpu/s3c44b0/start.S b/cpu/s3c44b0/start.S index b4b7c3f62ce..fc7f59228ad 100644 --- a/cpu/s3c44b0/start.S +++ b/cpu/s3c44b0/start.S @@ -117,9 +117,9 @@ reset: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ - bl memsetup + bl lowlevel_init #endif relocate: /* relocate U-Boot to RAM */ diff --git a/cpu/sa1100/start.S b/cpu/sa1100/start.S index 79743440705..08e41c7d793 100644 --- a/cpu/sa1100/start.S +++ b/cpu/sa1100/start.S @@ -213,10 +213,10 @@ cpu_init_crit: /* * before relocating, we have to setup RAM timing * because memory timing is board-dependend, you will - * find a memsetup.S in your board directory. + * find a lowlevel_init.S in your board directory. */ mov ip, lr - bl memsetup + bl lowlevel_init mov lr, ip /* diff --git a/doc/README.modnet50 b/doc/README.modnet50 index d8d9c9d8210..30338ce8cc7 100644 --- a/doc/README.modnet50 +++ b/doc/README.modnet50 @@ -47,7 +47,7 @@ Files: cpu/arm720t/serial_netarm.c .. serial I/O for the cpu -board/modnet50/memsetup.S .. memory setup for ModNET50 +board/modnet50/lowlevel_init.S .. memory setup for ModNET50 board/modnet50/flash.c .. flash routines board/modnet50/modnet50.c .. some board init stuff diff --git a/include/configs/B2.h b/include/configs/B2.h index 2fc97b27c2e..b031826f3f9 100644 --- a/include/configs/B2.h +++ b/include/configs/B2.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/SX1.h b/include/configs/SX1.h index de7f387817f..7c51a1b040f 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -27,7 +27,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 9ca80ab6707..2c664d59366 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -33,7 +33,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 8146fe723d6..d32ec34fc2a 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -29,7 +29,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* ARM asynchronous clock */ #define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ @@ -44,10 +44,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -/* define this to include the functionality of boot.bin in u-boot */ -#undef CONFIG_BOOTBINFUNC - -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL #define CFG_USE_MAIN_OSCILLATOR 1 /* flash */ #define MC_PUIA_VAL 0x00000000 @@ -77,7 +74,7 @@ #define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif +#endif /* CONFIG_INIT_CRITICAL */ /* * Size of malloc() pool */ @@ -180,19 +177,19 @@ #define CFG_ENV_SIZE 0x2000 /* 0x8000 */ #else #define CFG_ENV_IS_IN_FLASH 1 -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ #define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */ #else #define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ #define CFG_ENV_SIZE 0x2000 /* 0x8000 */ -#endif -#endif +#endif /* CONFIG_INIT_CRITICAL */ +#endif /* CFG_ENV_IS_IN_DATAFLASH */ #define CFG_LOAD_ADDR 0x21000000 /* default load address */ -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL #define CFG_BOOT_SIZE 0x00 /* 0 KBytes */ #define CFG_U_BOOT_BASE PHYS_FLASH_1 #define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */ @@ -200,7 +197,7 @@ #define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ #define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) #define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ -#endif +#endif /* CONFIG_INIT_CRITICAL */ #define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 34efc384b91..5a0f460e68b 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -29,7 +29,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* ARM asynchronous clock */ #define AT91C_MAIN_CLOCK 207360000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */ @@ -44,15 +44,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -/* define this to include the functionality of boot.bin in u-boot */ -#define CONFIG_BOOTBINFUNC - -/* just to make sure */ -#ifndef CONFIG_BOOTBINFUNC -#define CONFIG_BOOTBINFUNC -#endif - -#ifdef CONFIG_BOOTBINFUNC +#ifdef CONFIG_INIT_CRITICAL #define CFG_USE_MAIN_OSCILLATOR 1 /* flash */ #define MC_PUIA_VAL 0x00000000 @@ -82,7 +74,7 @@ #define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif +#endif /* CONFIG_INIT_CRITICAL */ /* * Size of malloc() pool diff --git a/include/configs/cradle.h b/include/configs/cradle.h index 2cec4c7c513..ca7a97b5628 100644 --- a/include/configs/cradle.h +++ b/include/configs/cradle.h @@ -32,7 +32,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options @@ -306,7 +306,7 @@ #else #define CFG_MDCNFG_VAL 0x00001aa1 /* FIXME can DTC be 01? */ #define CFG_MDMRS_VAL 0x00000000 -#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in memsetup.S */ +#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */ #endif /* diff --git a/include/configs/csb226.h b/include/configs/csb226.h index 1b39d23c884..0b2b251baeb 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -37,7 +37,7 @@ * If we are developing, we might want to start U-Boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index f3a871bda3f..b14e35b6288 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -31,8 +31,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ -#undef CONFIG_INIT_CRITICAL /* undef for developing */ +#undef CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h index d9dd620c1ca..41ad3943e1c 100644 --- a/include/configs/ep7312.h +++ b/include/configs/ep7312.h @@ -31,7 +31,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h index 24b1779b4cd..9e0ed51fa48 100644 --- a/include/configs/evb4510.h +++ b/include/configs/evb4510.h @@ -33,7 +33,7 @@ * Also swap the flash1 and flash2 addresses during debug. * */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index 618b25ae2df..dbb8dec85dc 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -38,7 +38,7 @@ * e.g. bootp/tftp download of the kernel is a far more convenient * when testing new kernels on this target. However the ADS GCPlus Linux * boot ROM leaves the MMU enabled when it passes control to U-Boot. So - * we use memsetup (CONFIG_INIT_CRITICAL) to remedy that problem. + * we use lowlevel_init (CONFIG_INIT_CRITICAL) to remedy that problem. */ #define CONFIG_INIT_CRITICAL diff --git a/include/configs/impa7.h b/include/configs/impa7.h index b4c1edfa3dc..dbc951de65e 100644 --- a/include/configs/impa7.h +++ b/include/configs/impa7.h @@ -31,7 +31,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/innokom.h b/include/configs/innokom.h index f8845192218..a3d36a0d8f0 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start U-Boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index 1add778e5fe..a8067f6ef2a 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -41,7 +41,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ diff --git a/include/configs/lart.h b/include/configs/lart.h index c98f3777ca2..3c9895ab27e 100644 --- a/include/configs/lart.h +++ b/include/configs/lart.h @@ -31,7 +31,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/logodl.h b/include/configs/logodl.h index 2aee461fdd8..b320a4050df 100644 --- a/include/configs/logodl.h +++ b/include/configs/logodl.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start U-Boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h index 808fe1c7b09..6f2c32c5469 100644 --- a/include/configs/lpd7a400.h +++ b/include/configs/lpd7a400.h @@ -27,7 +27,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL #undef CONFIG_USE_IRQ diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h index de465ea368c..e6855fb1ef3 100644 --- a/include/configs/lpd7a404.h +++ b/include/configs/lpd7a404.h @@ -27,7 +27,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL #undef CONFIG_USE_IRQ diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index efe205de4ca..536a175bd65 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h index fd1b47c4fc4..166aa1180cf 100644 --- a/include/configs/modnet50.h +++ b/include/configs/modnet50.h @@ -31,7 +31,7 @@ * If we are developing, we might want to start u-boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 3f1419e5ab5..f7ccea3d45e 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -32,7 +32,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h index 11d21b20d19..af39e2e88d4 100644 --- a/include/configs/ns9750dev.h +++ b/include/configs/ns9750dev.h @@ -31,7 +31,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 88d6c462b43..552beedc5cf 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -30,7 +30,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h index beff6d89d71..9b822152c24 100644 --- a/include/configs/omap1610h2.h +++ b/include/configs/omap1610h2.h @@ -30,7 +30,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index d0608ddef94..c00976efd14 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -30,7 +30,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 43be807f6a5..cd2dbf18b82 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -30,8 +30,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ - -#define CONFIG_INIT_CRITICAL /*undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index ace380fe2f0..1bdea6c5ab7 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -32,7 +32,7 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index f7338034b74..9ba19c85068 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options @@ -208,8 +208,8 @@ #define CFG_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM. tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */ -#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual - bits set in memsetup.S */ +#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual */ + /* bits set in lowlevel_init.S */ #define CFG_MDMRS_VAL 0x00000000 /* diff --git a/include/configs/shannon.h b/include/configs/shannon.h index 7afe62d7cc1..8a4e3709b14 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -37,7 +37,7 @@ * bring us to live */ #define CONFIG_INFERNO /* we are using the inferno bootldr */ -#undef CONFIG_INIT_CRITICAL /* undef for developing */ +#undef CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index b95b8c073c8..f477575be8d 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -34,7 +34,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 7e3a02d29ba..2a1cd7707a5 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -33,7 +33,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index e8c437364fc..6fda7b96fd5 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -29,7 +29,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/trab.h b/include/configs/trab.h index 137d9346773..2f592605644 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -40,7 +40,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h index a8a8ee535cd..ca32efb3c45 100644 --- a/include/configs/wepep250.h +++ b/include/configs/wepep250.h @@ -27,7 +27,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL #define CONFIG_PXA250 1 /* this is an PXA250 CPU */ #define CONFIG_WEPEP250 1 /* config for wepep250 board */ diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index fc3739f41d5..1177003c801 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -40,7 +40,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* #undef CONFIG_INIT_CRITICAL diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 10f69d998e0..1be7dd46a7d 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -32,7 +32,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* * High Level Configuration Options @@ -330,7 +330,7 @@ #define CFG_MSC2_VAL 0x35f435fc /* IDE / BCR + WatchDog (cs4)/(cS5) */ #define CFG_MDCNFG_VAL 0x000009c9 #define CFG_MDMRS_VAL 0x00220022 -#define CFG_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in memsetup.S */ +#define CFG_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in lowlevel_init.S */ /* * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index 87d2c942d76..6b15766daa2 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -32,7 +32,7 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* High Level Configuration Options */ #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ |