diff options
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 12 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 6 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 23 | ||||
| -rw-r--r-- | board/freescale/common/fman.c | 6 | ||||
| -rw-r--r-- | board/freescale/ls1043ardb/Makefile | 1 | ||||
| -rw-r--r-- | board/freescale/ls1043ardb/eth.c | 77 | ||||
| -rw-r--r-- | board/freescale/ls1043ardb/ls1043ardb.c | 4 | ||||
| -rw-r--r-- | doc/README.fsl-dpaa | 4 | ||||
| -rw-r--r-- | drivers/net/fm/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/fm/init.c | 10 | ||||
| -rw-r--r-- | drivers/net/fm/ls1043.c | 119 | ||||
| -rw-r--r-- | include/configs/ls1043a_common.h | 12 | ||||
| -rw-r--r-- | include/configs/ls1043ardb.h | 25 |
13 files changed, 295 insertions, 5 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index fe9d98204ca..0cb0afa0b39 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -274,6 +274,9 @@ static inline void final_mmu_setup(void) flush_dcache_range(gd->arch.tlb_addr, gd->arch.tlb_addr + gd->arch.tlb_size); +#ifdef CONFIG_SYS_DPAA_FMAN + flush_dcache_all(); +#endif /* point TTBR to the new table */ el = current_el(); @@ -432,6 +435,9 @@ int print_cpuinfo(void) printf("\n Bus: %-4s MHz ", strmhz(buf, sysinfo.freq_systembus)); printf("DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus)); +#ifdef CONFIG_SYS_DPAA_FMAN + printf(" FMAN: %-4s MHz", strmhz(buf, sysinfo.freq_fman[0])); +#endif #ifdef CONFIG_FSL_LSCH3 printf(" DP-DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2)); #endif @@ -468,6 +474,9 @@ int cpu_eth_init(bd_t *bis) #ifdef CONFIG_FSL_MC_ENET error = fsl_mc_ldpaa_init(bis); #endif +#ifdef CONFIG_FMAN_ENET + fm_standard_init(bis); +#endif return error; } @@ -484,6 +493,9 @@ int arch_early_init_r(void) #ifdef CONFIG_SYS_HAS_SERDES fsl_serdes_init(); #endif +#ifdef CONFIG_FMAN_ENET + fman_enet_init(); +#endif return 0; } diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 4839e332f0a..47599c12176 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -18,6 +18,12 @@ #include <asm/arch/mp.h> #endif +int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc) +{ + return fdt_setprop_string(blob, offset, "phy-connection-type", + phy_string_for_interface(phyc)); +} + #ifdef CONFIG_MP void ft_fixup_cpu(void *blob) { diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c index ea3723fe2e5..9d5bbe720ae 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c @@ -25,6 +25,9 @@ void get_sys_info(struct sys_info *sys_info) struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; u32 ccr; #endif +#ifdef CONFIG_SYS_DPAA_FMAN + u32 rcw_tmp; +#endif struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_CLK_ADDR); unsigned int cpu; const u8 core_cplx_pll[8] = { @@ -79,6 +82,26 @@ void get_sys_info(struct sys_info *sys_info) #define HWA_CGA_M1_CLK_SEL 0xe0000000 #define HWA_CGA_M1_CLK_SHIFT 29 +#ifdef CONFIG_SYS_DPAA_FMAN + rcw_tmp = in_be32(&gur->rcwsr[7]); + switch ((rcw_tmp & HWA_CGA_M1_CLK_SEL) >> HWA_CGA_M1_CLK_SHIFT) { + case 2: + sys_info->freq_fman[0] = freq_c_pll[0] / 2; + break; + case 3: + sys_info->freq_fman[0] = freq_c_pll[0] / 3; + break; + case 6: + sys_info->freq_fman[0] = freq_c_pll[1] / 2; + break; + case 7: + sys_info->freq_fman[0] = freq_c_pll[1] / 3; + break; + default: + printf("Error: Unknown FMan1 clock select!\n"); + break; + } +#endif #define HWA_CGA_M2_CLK_SEL 0x00000007 #define HWA_CGA_M2_CLK_SHIFT 0 diff --git a/board/freescale/common/fman.c b/board/freescale/common/fman.c index 9dc540211e4..26cf5175c77 100644 --- a/board/freescale/common/fman.c +++ b/board/freescale/common/fman.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011-2015 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -10,7 +10,11 @@ #include <fdt_support.h> #include <fm_eth.h> +#ifdef CONFIG_FSL_LAYERSCAPE +#include <asm/arch/fsl_serdes.h> +#else #include <asm/fsl_serdes.h> +#endif /* * Given the following ... diff --git a/board/freescale/ls1043ardb/Makefile b/board/freescale/ls1043ardb/Makefile index dd17e2e1613..5fe1cc93932 100644 --- a/board/freescale/ls1043ardb/Makefile +++ b/board/freescale/ls1043ardb/Makefile @@ -7,3 +7,4 @@ obj-y += cpld.o obj-y += ddr.o obj-y += ls1043ardb.o +obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o diff --git a/board/freescale/ls1043ardb/eth.c b/board/freescale/ls1043ardb/eth.c new file mode 100644 index 00000000000..61f2b5d4471 --- /dev/null +++ b/board/freescale/ls1043ardb/eth.c @@ -0,0 +1,77 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/io.h> +#include <netdev.h> +#include <fm_eth.h> +#include <fsl_dtsec.h> +#include <fsl_mdio.h> +#include <malloc.h> + +#include "../common/fman.h" + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + int i; + struct memac_mdio_info dtsec_mdio_info; + struct memac_mdio_info tgec_mdio_info; + struct mii_dev *dev; + u32 srds_s1; + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + + srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; + srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; + + dtsec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the 1G MDIO bus */ + fm_memac_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the 10G MDIO bus */ + fm_memac_mdio_init(bis, &tgec_mdio_info); + + /* Set the two on-board RGMII PHY address */ + fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR); + + /* QSGMII on lane B, MAC 1/2/5/6 */ + fm_info_set_phy_address(FM1_DTSEC1, QSGMII_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, QSGMII_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC5, QSGMII_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, QSGMII_PORT4_PHY_ADDR); + + switch (srds_s1) { + case 0x1455: + break; + default: + printf("Invalid SerDes protocol 0x%x for LS1043ARDB\n", + srds_s1); + break; + } + + dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) + fm_info_set_mdio(i, dev); + + /* XFI on lane A, MAC 9 */ + fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); + dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); + fm_info_set_mdio(FM1_10GEC1, dev); + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index 5b7f814d97d..6c0dd3f2670 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -13,6 +13,7 @@ #include <hwconfig.h> #include <ahci.h> #include <scsi.h> +#include <fm_eth.h> #include <fsl_csu.h> #include <fsl_esdhc.h> #include <fsl_ifc.h> @@ -108,6 +109,9 @@ int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); +#endif return 0; } diff --git a/doc/README.fsl-dpaa b/doc/README.fsl-dpaa index 0d8d4f6efcb..3ef5eeb32e1 100644 --- a/doc/README.fsl-dpaa +++ b/doc/README.fsl-dpaa @@ -2,9 +2,9 @@ This file documents Freescale DPAA-specific options. FMan (Frame Manager) - CONFIG_FSL_FM_10GEC_REGULAR_NOTATION - on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below: + on SoCs T4240, T2080, LS1043A, etc, the notation between 10GEC and MAC as below: 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 - on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below: + on SoCs T1024, etc, the notation between 10GEC and MAC as below: 10GEC1->MAC1, 10GEC2->MAC2 so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to identify the new SoCs on which 10GEC enumeration is consistent with MAC enumeration. diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index d052fcb372c..a3c9f996276 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -37,3 +37,4 @@ obj-$(CONFIG_PPC_T4160) += t4240.o obj-$(CONFIG_PPC_T4080) += t4240.o obj-$(CONFIG_PPC_B4420) += b4860.o obj-$(CONFIG_PPC_B4860) += b4860.o +obj-$(CONFIG_LS1043A) += ls1043.o diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index b3ff4c50dbe..3a1de59fd8f 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -1,13 +1,17 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011-2015 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ #include <errno.h> #include <common.h> #include <asm/io.h> -#include <asm/fsl_serdes.h> #include <fsl_mdio.h> +#ifdef CONFIG_FSL_LAYERSCAPE +#include <asm/arch/fsl_serdes.h> +#else +#include <asm/fsl_serdes.h> +#endif #include "fm.h" @@ -153,7 +157,9 @@ void fm_disable_port(enum fm_port port) return; fm_info[i].enabled = 0; +#ifndef CONFIG_SYS_FMAN_V3 fman_disable_port(port); +#endif } void fm_enable_port(enum fm_port port) diff --git a/drivers/net/fm/ls1043.c b/drivers/net/fm/ls1043.c new file mode 100644 index 00000000000..cf2cc95a3a4 --- /dev/null +++ b/drivers/net/fm/ls1043.c @@ -0,0 +1,119 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <phy.h> +#include <fm_eth.h> +#include <asm/io.h> +#include <asm/arch/fsl_serdes.h> + +#define FSL_CHASSIS2_RCWSR13_EC1 0xe0000000 /* bits 416..418 */ +#define FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII 0x00000000 +#define FSL_CHASSIS2_RCWSR13_EC1_GPIO 0x20000000 +#define FSL_CHASSIS2_RCWSR13_EC1_FTM 0xa0000000 +#define FSL_CHASSIS2_RCWSR13_EC2 0x1c000000 /* bits 419..421 */ +#define FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII 0x00000000 +#define FSL_CHASSIS2_RCWSR13_EC2_GPIO 0x04000000 +#define FSL_CHASSIS2_RCWSR13_EC2_1588 0x08000000 +#define FSL_CHASSIS2_RCWSR13_EC2_FTM 0x14000000 + +u32 port_to_devdisr[] = { + [FM1_DTSEC1] = FSL_CHASSIS2_DEVDISR2_DTSEC1_1, + [FM1_DTSEC2] = FSL_CHASSIS2_DEVDISR2_DTSEC1_2, + [FM1_DTSEC3] = FSL_CHASSIS2_DEVDISR2_DTSEC1_3, + [FM1_DTSEC4] = FSL_CHASSIS2_DEVDISR2_DTSEC1_4, + [FM1_DTSEC5] = FSL_CHASSIS2_DEVDISR2_DTSEC1_5, + [FM1_DTSEC6] = FSL_CHASSIS2_DEVDISR2_DTSEC1_6, + [FM1_DTSEC9] = FSL_CHASSIS2_DEVDISR2_DTSEC1_9, + [FM1_DTSEC10] = FSL_CHASSIS2_DEVDISR2_DTSEC1_10, + [FM1_10GEC1] = FSL_CHASSIS2_DEVDISR2_10GEC1_1, + [FM1_10GEC2] = FSL_CHASSIS2_DEVDISR2_10GEC1_2, + [FM1_10GEC3] = FSL_CHASSIS2_DEVDISR2_10GEC1_3, + [FM1_10GEC4] = FSL_CHASSIS2_DEVDISR2_10GEC1_4, +}; + +static int is_device_disabled(enum fm_port port) +{ + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 devdisr2 = in_be32(&gur->devdisr2); + + return port_to_devdisr[port] & devdisr2; +} + +void fman_disable_port(enum fm_port port) +{ + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + + setbits_be32(&gur->devdisr2, port_to_devdisr[port]); +} + +phy_interface_t fman_port_enet_if(enum fm_port port) +{ + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + + if (is_device_disabled(port)) { + printf("%s:%d: port(%d) is disabled\n", __func__, + __LINE__, port); + return PHY_INTERFACE_MODE_NONE; + } + + if ((port == FM1_10GEC1) && (is_serdes_configured(XFI_FM1_MAC9))) + return PHY_INTERFACE_MODE_XGMII; + + if ((port == FM1_DTSEC9) && (is_serdes_configured(XFI_FM1_MAC9))) + return PHY_INTERFACE_MODE_NONE; + + if (port == FM1_DTSEC3) + if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) == + FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII) { + printf("%s:%d: port(FM1_DTSEC3) is OK\n", + __func__, __LINE__); + return PHY_INTERFACE_MODE_RGMII; + } + if (port == FM1_DTSEC4) + if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) == + FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII) { + printf("%s:%d: port(FM1_DTSEC4) is OK\n", + __func__, __LINE__); + return PHY_INTERFACE_MODE_RGMII; + } + + /* handle SGMII */ + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + if ((port == FM1_DTSEC2) && + is_serdes_configured(SGMII_2500_FM1_DTSEC2)) + return PHY_INTERFACE_MODE_SGMII_2500; + case FM1_DTSEC5: + case FM1_DTSEC6: + case FM1_DTSEC9: + if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + else if ((port == FM1_DTSEC9) && + is_serdes_configured(SGMII_2500_FM1_DTSEC9)) + return PHY_INTERFACE_MODE_SGMII_2500; + break; + default: + break; + } + + /* handle QSGMII */ + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC5: + case FM1_DTSEC6: + /* only MAC 1,2,5,6 available for QSGMII */ + if (is_serdes_configured(QSGMII_FM1_A)) + return PHY_INTERFACE_MODE_QSGMII; + break; + default: + break; + } + + return PHY_INTERFACE_MODE_NONE; +} diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 64eda6f5aa1..f0fb52db965 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -153,6 +153,18 @@ #define CONFIG_CMD_ENV #define CONFIG_CMD_PING +/* FMan ucode */ +#define CONFIG_SYS_DPAA_FMAN +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 + +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +/* FMan fireware Pre-load address */ +#define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif + /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) #define CONFIG_ARCH_EARLY_INIT_R diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 8ac752e6124..c77664029f1 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -234,4 +234,29 @@ #define CONFIG_ENV_SIZE 0x20000 #endif +/* FMan */ +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_CMD_MII +#define CONFIG_PHYLIB +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ + +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_REALTEK +#define CONFIG_PHY_AQUANTIA + +#define RGMII_PHY1_ADDR 0x1 +#define RGMII_PHY2_ADDR 0x2 + +#define QSGMII_PORT1_PHY_ADDR 0x4 +#define QSGMII_PORT2_PHY_ADDR 0x5 +#define QSGMII_PORT3_PHY_ADDR 0x6 +#define QSGMII_PORT4_PHY_ADDR 0x7 + +#define FM1_10GEC1_PHY_ADDR 0x1 + +#define CONFIG_ETHPRIME "FM1@DTSEC3" +#endif + #endif /* __LS1043ARDB_H__ */ |