diff options
82 files changed, 2038 insertions, 1298 deletions
@@ -915,6 +915,12 @@ OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE $(call if_changed,pad_cat) +MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \ + -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot +u-boot-nand.gph: u-boot.bin FORCE + $(call if_changed,mkimage) + @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@ + ifneq ($(CONFIG_SUNXI),) OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile index c4af2521102..f8519c04035 100644 --- a/arch/arm/cpu/armv7/keystone/Makefile +++ b/arch/arm/cpu/armv7/keystone/Makefile @@ -8,9 +8,12 @@ obj-y += init.o obj-y += psc.o obj-y += clock.o +obj-$(CONFIG_SOC_K2HK) += clock-k2hk.o +obj-$(CONFIG_SOC_K2E) += clock-k2e.o obj-y += cmd_clock.o obj-y += cmd_mon.o -obj-y += keystone_nav.o +obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_nav.o obj-y += msmc.o obj-$(CONFIG_SPL_BUILD) += spl.o obj-y += ddr3.o +obj-y += keystone.o diff --git a/arch/arm/cpu/armv7/keystone/clock-k2e.c b/arch/arm/cpu/armv7/keystone/clock-k2e.c new file mode 100644 index 00000000000..42092e1060d --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/clock-k2e.c @@ -0,0 +1,101 @@ +/* + * Keystone2: get clk rate for K2E + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/clock_defs.h> + +const struct keystone_pll_regs keystone_pll_regs[] = { + [CORE_PLL] = {KS2_MAINPLLCTL0, KS2_MAINPLLCTL1}, + [PASS_PLL] = {KS2_PASSPLLCTL0, KS2_PASSPLLCTL1}, + [DDR3_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1}, +}; + +/** + * pll_freq_get - get pll frequency + * Fout = Fref * NF(mult) / NR(prediv) / OD + * @pll: pll identifier + */ +static unsigned long pll_freq_get(int pll) +{ + unsigned long mult = 1, prediv = 1, output_div = 2; + unsigned long ret; + u32 tmp, reg; + + if (pll == CORE_PLL) { + ret = external_clk[sys_clk]; + if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) { + /* PLL mode */ + tmp = __raw_readl(KS2_MAINPLLCTL0); + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) | + (pllctl_reg_read(pll, mult) & + PLLM_MULT_LO_MASK)) + 1; + output_div = ((pllctl_reg_read(pll, secctl) >> + PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1; + + ret = ret / prediv / output_div * mult; + } + } else { + switch (pll) { + case PASS_PLL: + ret = external_clk[pa_clk]; + reg = KS2_PASSPLLCTL0; + break; + case DDR3_PLL: + ret = external_clk[ddr3_clk]; + reg = KS2_DDR3APLLCTL0; + break; + default: + return 0; + } + + tmp = __raw_readl(reg); + + if (!(tmp & PLLCTL_BYPASS)) { + /* Bypass disabled */ + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1; + output_div = ((tmp >> PLL_CLKOD_SHIFT) & + PLL_CLKOD_MASK) + 1; + ret = ((ret / prediv) * mult) / output_div; + } + } + + return ret; +} + +unsigned long clk_get_rate(unsigned int clk) +{ + switch (clk) { + case core_pll_clk: return pll_freq_get(CORE_PLL); + case pass_pll_clk: return pll_freq_get(PASS_PLL); + case ddr3_pll_clk: return pll_freq_get(DDR3_PLL); + case sys_clk0_1_clk: + case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1); + case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2); + case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3); + case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4); + case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2; + case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3; + case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4; + case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6; + case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8; + case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12; + case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24; + case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3; + case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4; + case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6; + case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12; + default: + break; + } + + return 0; +} diff --git a/arch/arm/cpu/armv7/keystone/clock-k2hk.c b/arch/arm/cpu/armv7/keystone/clock-k2hk.c new file mode 100644 index 00000000000..96a9f728861 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/clock-k2hk.c @@ -0,0 +1,113 @@ +/* + * Keystone2: get clk rate for K2HK + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/clock_defs.h> + +const struct keystone_pll_regs keystone_pll_regs[] = { + [CORE_PLL] = {KS2_MAINPLLCTL0, KS2_MAINPLLCTL1}, + [PASS_PLL] = {KS2_PASSPLLCTL0, KS2_PASSPLLCTL1}, + [TETRIS_PLL] = {KS2_ARMPLLCTL0, KS2_ARMPLLCTL1}, + [DDR3A_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1}, + [DDR3B_PLL] = {KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1}, +}; + +/** + * pll_freq_get - get pll frequency + * Fout = Fref * NF(mult) / NR(prediv) / OD + * @pll: pll identifier + */ +static unsigned long pll_freq_get(int pll) +{ + unsigned long mult = 1, prediv = 1, output_div = 2; + unsigned long ret; + u32 tmp, reg; + + if (pll == CORE_PLL) { + ret = external_clk[sys_clk]; + if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) { + /* PLL mode */ + tmp = __raw_readl(KS2_MAINPLLCTL0); + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) | + (pllctl_reg_read(pll, mult) & + PLLM_MULT_LO_MASK)) + 1; + output_div = ((pllctl_reg_read(pll, secctl) >> + PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1; + + ret = ret / prediv / output_div * mult; + } + } else { + switch (pll) { + case PASS_PLL: + ret = external_clk[pa_clk]; + reg = KS2_PASSPLLCTL0; + break; + case TETRIS_PLL: + ret = external_clk[tetris_clk]; + reg = KS2_ARMPLLCTL0; + break; + case DDR3A_PLL: + ret = external_clk[ddr3a_clk]; + reg = KS2_DDR3APLLCTL0; + break; + case DDR3B_PLL: + ret = external_clk[ddr3b_clk]; + reg = KS2_DDR3BPLLCTL0; + break; + default: + return 0; + } + + tmp = __raw_readl(reg); + + if (!(tmp & PLLCTL_BYPASS)) { + /* Bypass disabled */ + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1; + output_div = ((tmp >> PLL_CLKOD_SHIFT) & + PLL_CLKOD_MASK) + 1; + ret = ((ret / prediv) * mult) / output_div; + } + } + + return ret; +} + +unsigned long clk_get_rate(unsigned int clk) +{ + switch (clk) { + case core_pll_clk: return pll_freq_get(CORE_PLL); + case pass_pll_clk: return pll_freq_get(PASS_PLL); + case tetris_pll_clk: return pll_freq_get(TETRIS_PLL); + case ddr3a_pll_clk: return pll_freq_get(DDR3A_PLL); + case ddr3b_pll_clk: return pll_freq_get(DDR3B_PLL); + case sys_clk0_1_clk: + case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1); + case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2); + case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3); + case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4); + case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2; + case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3; + case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4; + case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6; + case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8; + case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12; + case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24; + case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3; + case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4; + case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6; + case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12; + default: + break; + } + + return 0; +} diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c index bfa4c9d8f6a..03c1d9f660f 100644 --- a/arch/arm/cpu/armv7/keystone/clock.c +++ b/arch/arm/cpu/armv7/keystone/clock.c @@ -8,9 +8,6 @@ */ #include <common.h> -#include <asm-generic/errno.h> -#include <asm/io.h> -#include <asm/processor.h> #include <asm/arch/clock.h> #include <asm/arch/clock_defs.h> @@ -24,106 +21,6 @@ static void wait_for_completion(const struct pll_init_data *data) } } -struct pll_regs { - u32 reg0, reg1; -}; - -static const struct pll_regs pll_regs[] = { - [CORE_PLL] = { K2HK_MAINPLLCTL0, K2HK_MAINPLLCTL1}, - [PASS_PLL] = { K2HK_PASSPLLCTL0, K2HK_PASSPLLCTL1}, - [TETRIS_PLL] = { K2HK_ARMPLLCTL0, K2HK_ARMPLLCTL1}, - [DDR3A_PLL] = { K2HK_DDR3APLLCTL0, K2HK_DDR3APLLCTL1}, - [DDR3B_PLL] = { K2HK_DDR3BPLLCTL0, K2HK_DDR3BPLLCTL1}, -}; - -/* Fout = Fref * NF(mult) / NR(prediv) / OD */ -static unsigned long pll_freq_get(int pll) -{ - unsigned long mult = 1, prediv = 1, output_div = 2; - unsigned long ret; - u32 tmp, reg; - - if (pll == CORE_PLL) { - ret = external_clk[sys_clk]; - if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) { - /* PLL mode */ - tmp = __raw_readl(K2HK_MAINPLLCTL0); - prediv = (tmp & PLL_DIV_MASK) + 1; - mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) | - (pllctl_reg_read(pll, mult) & - PLLM_MULT_LO_MASK)) + 1; - output_div = ((pllctl_reg_read(pll, secctl) >> - PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1; - - ret = ret / prediv / output_div * mult; - } - } else { - switch (pll) { - case PASS_PLL: - ret = external_clk[pa_clk]; - reg = K2HK_PASSPLLCTL0; - break; - case TETRIS_PLL: - ret = external_clk[tetris_clk]; - reg = K2HK_ARMPLLCTL0; - break; - case DDR3A_PLL: - ret = external_clk[ddr3a_clk]; - reg = K2HK_DDR3APLLCTL0; - break; - case DDR3B_PLL: - ret = external_clk[ddr3b_clk]; - reg = K2HK_DDR3BPLLCTL0; - break; - default: - return 0; - } - - tmp = __raw_readl(reg); - - if (!(tmp & PLLCTL_BYPASS)) { - /* Bypass disabled */ - prediv = (tmp & PLL_DIV_MASK) + 1; - mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1; - output_div = ((tmp >> PLL_CLKOD_SHIFT) & - PLL_CLKOD_MASK) + 1; - ret = ((ret / prediv) * mult) / output_div; - } - } - - return ret; -} - -unsigned long clk_get_rate(unsigned int clk) -{ - switch (clk) { - case core_pll_clk: return pll_freq_get(CORE_PLL); - case pass_pll_clk: return pll_freq_get(PASS_PLL); - case tetris_pll_clk: return pll_freq_get(TETRIS_PLL); - case ddr3a_pll_clk: return pll_freq_get(DDR3A_PLL); - case ddr3b_pll_clk: return pll_freq_get(DDR3B_PLL); - case sys_clk0_1_clk: - case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1); - case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2); - case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3); - case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4); - case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2; - case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3; - case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4; - case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6; - case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8; - case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12; - case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24; - case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3; - case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4; - case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6; - case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12; - default: - break; - } - return 0; -} - void init_pll(const struct pll_init_data *data) { u32 tmp, tmp_ctl, pllm, plld, pllod, bwadj; @@ -139,7 +36,7 @@ void init_pll(const struct pll_init_data *data) tmp = pllctl_reg_read(data->pll, secctl); if (tmp & (PLLCTL_BYPASS)) { - setbits_le32(pll_regs[data->pll].reg1, + setbits_le32(keystone_pll_regs[data->pll].reg1, BIT(MAIN_ENSAT_OFFSET)); pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN | @@ -159,21 +56,24 @@ void init_pll(const struct pll_init_data *data) pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK); - clrsetbits_le32(pll_regs[data->pll].reg0, PLLM_MULT_HI_SMASK, - (pllm << 6)); + clrsetbits_le32(keystone_pll_regs[data->pll].reg0, + PLLM_MULT_HI_SMASK, (pllm << 6)); /* Set the BWADJ (12 bit field) */ tmp_ctl = pllm >> 1; /* Divide the pllm by 2 */ - clrsetbits_le32(pll_regs[data->pll].reg0, PLL_BWADJ_LO_SMASK, + clrsetbits_le32(keystone_pll_regs[data->pll].reg0, + PLL_BWADJ_LO_SMASK, (tmp_ctl << PLL_BWADJ_LO_SHIFT)); - clrsetbits_le32(pll_regs[data->pll].reg1, PLL_BWADJ_HI_MASK, + clrsetbits_le32(keystone_pll_regs[data->pll].reg1, + PLL_BWADJ_HI_MASK, (tmp_ctl >> 8)); /* * Set the pll divider (6 bit field) * * PLLD[5:0] is located in MAINPLLCTL0 */ - clrsetbits_le32(pll_regs[data->pll].reg0, PLL_DIV_MASK, plld); + clrsetbits_le32(keystone_pll_regs[data->pll].reg0, + PLL_DIV_MASK, plld); /* Set the OUTPUT DIVIDE (4 bit field) in SECCTL */ pllctl_reg_rmw(data->pll, secctl, PLL_CLKOD_SMASK, @@ -206,17 +106,18 @@ void init_pll(const struct pll_init_data *data) tmp = pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN); +#ifndef CONFIG_SOC_K2E } else if (data->pll == TETRIS_PLL) { bwadj = pllm >> 1; /* 1.5 Set PLLCTL0[BYPASS] =1 (enable bypass), */ - setbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS); + setbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS); /* * Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass) * only applicable for Kepler */ - clrbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN); + clrbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN); /* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */ - setbits_le32(pll_regs[data->pll].reg1 , + setbits_le32(keystone_pll_regs[data->pll].reg1 , PLL_PLLRST | PLLCTL_ENSAT); /* @@ -229,13 +130,13 @@ void init_pll(const struct pll_init_data *data) (pllm << 6) | (plld & PLL_DIV_MASK) | (pllod << PLL_CLKOD_SHIFT) | PLLCTL_BYPASS; - __raw_writel(tmp, pll_regs[data->pll].reg0); + __raw_writel(tmp, keystone_pll_regs[data->pll].reg0); /* Set BWADJ[11:8] bits */ - tmp = __raw_readl(pll_regs[data->pll].reg1); + tmp = __raw_readl(keystone_pll_regs[data->pll].reg1); tmp &= ~(PLL_BWADJ_HI_MASK); tmp |= ((bwadj>>8) & PLL_BWADJ_HI_MASK); - __raw_writel(tmp, pll_regs[data->pll].reg1); + __raw_writel(tmp, keystone_pll_regs[data->pll].reg1); /* * 5 Wait for at least 5 us based on the reference * clock (PLL reset time) @@ -243,26 +144,27 @@ void init_pll(const struct pll_init_data *data) sdelay(21000); /* Wait for a minimum of 7 us*/ /* 6 In PLLCTL1, write PLLRST = 0 (PLL reset is released) */ - clrbits_le32(pll_regs[data->pll].reg1, PLL_PLLRST); + clrbits_le32(keystone_pll_regs[data->pll].reg1, PLL_PLLRST); /* * 7 Wait for at least 500 * REFCLK cycles * (PLLD + 1) * (PLL lock time) */ sdelay(105000); /* 8 disable bypass */ - clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS); + clrbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS); /* * 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass) * only applicable for Kepler */ - setbits_le32(K2HK_MISC_CTRL, ARM_PLL_EN); + setbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN); +#endif } else { - setbits_le32(pll_regs[data->pll].reg1, PLLCTL_ENSAT); + setbits_le32(keystone_pll_regs[data->pll].reg1, PLLCTL_ENSAT); /* * process keeps state of Bypass bit while programming * all other DDR PLL settings */ - tmp = __raw_readl(pll_regs[data->pll].reg0); + tmp = __raw_readl(keystone_pll_regs[data->pll].reg0); tmp &= PLLCTL_BYPASS; /* clear everything except Bypass */ /* @@ -274,10 +176,10 @@ void init_pll(const struct pll_init_data *data) (pllm << PLL_MULT_SHIFT) | (plld & PLL_DIV_MASK) | (pllod << PLL_CLKOD_SHIFT); - __raw_writel(tmp, pll_regs[data->pll].reg0); + __raw_writel(tmp, keystone_pll_regs[data->pll].reg0); /* Set BWADJ[11:8] bits */ - tmp = __raw_readl(pll_regs[data->pll].reg1); + tmp = __raw_readl(keystone_pll_regs[data->pll].reg1); tmp &= ~(PLL_BWADJ_HI_MASK); tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK); @@ -285,20 +187,20 @@ void init_pll(const struct pll_init_data *data) if (data->pll == PASS_PLL) tmp |= PLLCTL_PAPLL; - __raw_writel(tmp, pll_regs[data->pll].reg1); + __raw_writel(tmp, keystone_pll_regs[data->pll].reg1); /* Reset bit: bit 14 for both DDR3 & PASS PLL */ tmp = PLL_PLLRST; /* Set RESET bit = 1 */ - setbits_le32(pll_regs[data->pll].reg1, tmp); + setbits_le32(keystone_pll_regs[data->pll].reg1, tmp); /* Wait for a minimum of 7 us*/ sdelay(21000); /* Clear RESET bit */ - clrbits_le32(pll_regs[data->pll].reg1, tmp); + clrbits_le32(keystone_pll_regs[data->pll].reg1, tmp); sdelay(105000); /* clear BYPASS (Enable PLL Mode) */ - clrbits_le32(pll_regs[data->pll].reg0, PLLCTL_BYPASS); + clrbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS); sdelay(21000); /* Wait for a minimum of 7 us*/ } diff --git a/arch/arm/cpu/armv7/keystone/cmd_clock.c b/arch/arm/cpu/armv7/keystone/cmd_clock.c index afd30f38534..d97c95be11d 100644 --- a/arch/arm/cpu/armv7/keystone/cmd_clock.c +++ b/arch/arm/cpu/armv7/keystone/cmd_clock.c @@ -14,10 +14,10 @@ #include <asm/arch/psc_defs.h> struct pll_init_data cmd_pll_data = { - .pll = MAIN_PLL, - .pll_m = 16, - .pll_d = 1, - .pll_od = 2, + .pll = MAIN_PLL, + .pll_m = 16, + .pll_d = 1, + .pll_od = 2, }; int do_pll_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -27,12 +27,19 @@ int do_pll_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (strncmp(argv[1], "pa", 2) == 0) cmd_pll_data.pll = PASS_PLL; +#ifndef CONFIG_SOC_K2E else if (strncmp(argv[1], "arm", 3) == 0) cmd_pll_data.pll = TETRIS_PLL; +#endif +#ifdef CONFIG_SOC_K2HK else if (strncmp(argv[1], "ddr3a", 5) == 0) cmd_pll_data.pll = DDR3A_PLL; else if (strncmp(argv[1], "ddr3b", 5) == 0) cmd_pll_data.pll = DDR3B_PLL; +#else + else if (strncmp(argv[1], "ddr3", 4) == 0) + cmd_pll_data.pll = DDR3_PLL; +#endif else goto pll_cmd_usage; @@ -51,11 +58,20 @@ pll_cmd_usage: return cmd_usage(cmdtp); } +#ifdef CONFIG_SOC_K2HK U_BOOT_CMD( pllset, 5, 0, do_pll_cmd, "set pll multiplier and pre divider", "<pa|arm|ddr3a|ddr3b> <mult> <div> <OD>\n" ); +#endif +#ifdef CONFIG_SOC_K2E +U_BOOT_CMD( + pllset, 5, 0, do_pll_cmd, + "set pll multiplier and pre divider", + "<pa|ddr3> <mult> <div> <OD>\n" +); +#endif int do_getclk_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -79,7 +95,12 @@ U_BOOT_CMD( getclk, 2, 0, do_getclk_cmd, "get clock rate", "<clk index>\n" - "See the 'enum clk_e' in the k2hk clock.h for clk indexes\n" +#ifdef CONFIG_SOC_K2HK + "See the 'enum clk_e' in the clock-k2hk.h for clk indexes\n" +#endif +#ifdef CONFIG_SOC_K2E + "See the 'enum clk_e' in the clock-k2e.h for clk indexes\n" +#endif ); int do_psc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c index 4875db76a35..2391e794e89 100644 --- a/arch/arm/cpu/armv7/keystone/ddr3.c +++ b/arch/arm/cpu/armv7/keystone/ddr3.c @@ -7,10 +7,11 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <asm/arch/hardware.h> #include <asm/io.h> +#include <common.h> +#include <asm/arch/ddr3.h> -void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) +void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) { unsigned int tmp; @@ -57,7 +58,7 @@ void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) ; } -void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg) +void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg) { __raw_writel(emif_cfg->sdcfg, base + KS2_DDR3_SDCFG_OFFSET); __raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET); @@ -67,3 +68,21 @@ void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg) __raw_writel(emif_cfg->zqcfg, base + KS2_DDR3_ZQCFG_OFFSET); __raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET); } + +void ddr3_reset_ddrphy(void) +{ + u32 tmp; + + /* Assert DDR3A PHY reset */ + tmp = readl(KS2_DDR3APLLCTL1); + tmp |= KS2_DDR3_PLLCTRL_PHY_RESET; + writel(tmp, KS2_DDR3APLLCTL1); + + /* wait 10us to catch the reset */ + udelay(10); + + /* Release DDR3A PHY reset */ + tmp = readl(KS2_DDR3APLLCTL1); + tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET; + __raw_writel(tmp, KS2_DDR3APLLCTL1); +} diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c index 4df5ae1cae9..a8f8aee8ab4 100644 --- a/arch/arm/cpu/armv7/keystone/init.c +++ b/arch/arm/cpu/armv7/keystone/init.c @@ -10,13 +10,14 @@ #include <common.h> #include <ns16550.h> #include <asm/io.h> +#include <asm/arch/msmc.h> #include <asm/arch/clock.h> #include <asm/arch/hardware.h> void chip_configuration_unlock(void) { - __raw_writel(KEYSTONE_KICK0_MAGIC, KEYSTONE_KICK0); - __raw_writel(KEYSTONE_KICK1_MAGIC, KEYSTONE_KICK1); + __raw_writel(KS2_KICK0_MAGIC, KS2_KICK0); + __raw_writel(KS2_KICK1_MAGIC, KS2_KICK1); } int arch_cpu_init(void) @@ -24,11 +25,12 @@ int arch_cpu_init(void) chip_configuration_unlock(); icache_enable(); -#ifdef CONFIG_SOC_K2HK - share_all_segments(8); - share_all_segments(9); - share_all_segments(10); /* QM PDSP */ - share_all_segments(11); /* PCIE */ + msmc_share_all_segments(8); /* TETRIS */ + msmc_share_all_segments(9); /* NETCP */ + msmc_share_all_segments(10); /* QM PDSP */ + msmc_share_all_segments(11); /* PCIE 0 */ +#ifdef CONFIG_SOC_K2E + msmc_share_all_segments(13); /* PCIE 1 */ #endif /* diff --git a/arch/arm/cpu/armv7/keystone/keystone.c b/arch/arm/cpu/armv7/keystone/keystone.c new file mode 100644 index 00000000000..11a9357db41 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/keystone.c @@ -0,0 +1,87 @@ +/* + * Keystone EVM : Board initialization + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mon.h> +#include <asm/arch/psc_defs.h> +#include <asm/arch/hardware.h> +#include <asm/arch/hardware.h> + +/** + * cpu_to_bus - swap bytes of the 32-bit data if the device is BE + * @ptr - array of data + * @length - lenght of data array + */ +int cpu_to_bus(u32 *ptr, u32 length) +{ + u32 i; + + if (!(readl(KS2_DEVSTAT) & 0x1)) + for (i = 0; i < length; i++, ptr++) + *ptr = cpu_to_be32(*ptr); + + return 0; +} + +static int turn_off_myself(void) +{ + printf("Turning off ourselves\r\n"); + mon_power_off(0); + + psc_disable_module(KS2_LPSC_TETRIS); + psc_disable_domain(KS2_TETRIS_PWR_DOMAIN); + + asm volatile ("isb\n" + "dsb\n" + "wfi\n"); + + printf("What! Should not see that\n"); + return 0; +} + +static void turn_off_all_dsps(int num_dsps) +{ + int i; + + for (i = 0; i < num_dsps; i++) { + if (psc_disable_module(i + KS2_LPSC_GEM_0)) + printf("Cannot disable module for #%d DSP", i); + + if (psc_disable_domain(i + 8)) + printf("Cannot disable domain for #%d DSP", i); + } +} + +int do_killme_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + return turn_off_myself(); +} + +U_BOOT_CMD( + killme, 1, 0, do_killme_cmd, + "turn off main ARM core", + "turn off main ARM core. Should not live after that :(\n" +); + +int misc_init_r(void) +{ + char *env; + long ks2_debug = 0; + + env = getenv("ks2_debug"); + + if (env) + ks2_debug = simple_strtol(env, NULL, 0); + + if ((ks2_debug & DBG_LEAVE_DSPS_ON) == 0) + turn_off_all_dsps(KS2_NUM_DSPS); + + return 0; +} diff --git a/arch/arm/cpu/armv7/keystone/msmc.c b/arch/arm/cpu/armv7/keystone/msmc.c index f3f1621d205..7d8e5978dfa 100644 --- a/arch/arm/cpu/armv7/keystone/msmc.c +++ b/arch/arm/cpu/armv7/keystone/msmc.c @@ -8,7 +8,7 @@ */ #include <common.h> -#include <asm/arch/hardware.h> +#include <asm/arch/msmc.h> struct mpax { u32 mpaxl; @@ -56,9 +56,9 @@ struct msms_regs { }; -void share_all_segments(int priv_id) +void msmc_share_all_segments(int priv_id) { - struct msms_regs *msmc = (struct msms_regs *)K2HK_MSMC_CTRL_BASE; + struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE; int j; for (j = 0; j < 8; j++) { diff --git a/arch/arm/cpu/armv7/keystone/psc.c b/arch/arm/cpu/armv7/keystone/psc.c index c844dc84d50..fa5422f2e8b 100644 --- a/arch/arm/cpu/armv7/keystone/psc.c +++ b/arch/arm/cpu/armv7/keystone/psc.c @@ -16,10 +16,6 @@ #define DEVICE_REG32_R(addr) __raw_readl((u32 *)(addr)) #define DEVICE_REG32_W(addr, val) __raw_writel(val, (u32 *)(addr)) -#ifdef CONFIG_SOC_K2HK -#define DEVICE_PSC_BASE K2HK_PSC_BASE -#endif - int psc_delay(void) { udelay(10); @@ -55,7 +51,7 @@ int psc_wait(u32 domain_num) retry = 0; do { - ptstat = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PSTAT); + ptstat = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PSTAT); ptstat = ptstat & (1 << domain_num); } while ((ptstat != 0) && ((retry += psc_delay()) < PSC_PTSTAT_TIMEOUT_LIMIT)); @@ -71,7 +67,7 @@ u32 psc_get_domain_num(u32 mod_num) u32 domain_num; /* Get the power domain associated with the module number */ - domain_num = DEVICE_REG32_R(DEVICE_PSC_BASE + + domain_num = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num)); domain_num = PSC_REG_MDCFG_GET_PD(domain_num); @@ -106,7 +102,7 @@ int psc_set_state(u32 mod_num, u32 state) * Get the power domain associated with the module number, and reset * isolation functionality */ - v = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCFG(mod_num)); + v = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num)); domain_num = PSC_REG_MDCFG_GET_PD(v); reset_iso = PSC_REG_MDCFG_GET_RESET_ISO(v); @@ -123,24 +119,24 @@ int psc_set_state(u32 mod_num, u32 state) * change is made if the new state is power down. */ if (state == PSC_REG_VAL_MDCTL_NEXT_ON) { - pdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + + pdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num)); pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl, PSC_REG_VAL_PDCTL_NEXT_ON); - DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num), + DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num), pdctl); } /* Set the next state for the module to enabled/disabled */ - mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); mdctl = PSC_REG_MDCTL_SET_NEXT(mdctl, state); mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, reset_iso); - DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); + DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); /* Trigger the enable */ - ptcmd = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PTCMD); + ptcmd = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PTCMD); ptcmd |= (u32)(1<<domain_num); - DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PTCMD, ptcmd); + DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_PTCMD, ptcmd); /* Wait on the complete */ return psc_wait(domain_num); @@ -161,7 +157,7 @@ int psc_enable_module(u32 mod_num) u32 mdctl; /* Set the bit to apply reset */ - mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); if ((mdctl & 0x3f) == PSC_REG_VAL_MDSTAT_STATE_ON) return 0; @@ -180,11 +176,11 @@ int psc_disable_module(u32 mod_num) u32 mdctl; /* Set the bit to apply reset */ - mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); if ((mdctl & 0x3f) == 0) return 0; mdctl = PSC_REG_MDCTL_SET_LRSTZ(mdctl, 0); - DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); + DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); return psc_set_state(mod_num, PSC_REG_VAL_MDCTL_NEXT_SWRSTDISABLE); } @@ -203,11 +199,11 @@ int psc_set_reset_iso(u32 mod_num) u32 mdctl; /* Set the reset isolation bit */ - mdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num)); + mdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num)); mdctl = PSC_REG_MDCTL_SET_RESET_ISO(mdctl, 1); - DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); + DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_MDCTL(mod_num), mdctl); - v = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_MDCFG(mod_num)); + v = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_MDCFG(mod_num)); if (PSC_REG_MDCFG_GET_RESET_ISO(v) == 1) return 0; @@ -224,14 +220,14 @@ int psc_disable_domain(u32 domain_num) u32 pdctl; u32 ptcmd; - pdctl = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num)); + pdctl = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num)); pdctl = PSC_REG_PDCTL_SET_NEXT(pdctl, PSC_REG_VAL_PDCTL_NEXT_OFF); pdctl = PSC_REG_PDCTL_SET_PDMODE(pdctl, PSC_REG_VAL_PDCTL_PDMODE_SLEEP); - DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PDCTL(domain_num), pdctl); + DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_PDCTL(domain_num), pdctl); - ptcmd = DEVICE_REG32_R(DEVICE_PSC_BASE + PSC_REG_PTCMD); + ptcmd = DEVICE_REG32_R(KS2_PSC_BASE + PSC_REG_PTCMD); ptcmd |= (u32)(1 << domain_num); - DEVICE_REG32_W(DEVICE_PSC_BASE + PSC_REG_PTCMD, ptcmd); + DEVICE_REG32_W(KS2_PSC_BASE + PSC_REG_PTCMD, ptcmd); return psc_wait(domain_num); } diff --git a/arch/arm/cpu/armv7/keystone/spl.c b/arch/arm/cpu/armv7/keystone/spl.c index e07b64db9ee..d4b0e9b163e 100644 --- a/arch/arm/cpu/armv7/keystone/spl.c +++ b/arch/arm/cpu/armv7/keystone/spl.c @@ -18,10 +18,18 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_K2HK_EVM static struct pll_init_data spl_pll_config[] = { CORE_PLL_799, TETRIS_PLL_500, }; +#endif + +#ifdef CONFIG_K2E_EVM +static struct pll_init_data spl_pll_config[] = { + CORE_PLL_800, +}; +#endif void spl_init_keystone_plls(void) { diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 5f50a198015..1b4477f4690 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -123,7 +123,8 @@ void s_init(void) hw_data_init(); #ifdef CONFIG_SPL_BUILD - if (warm_reset() && (omap_revision() <= OMAP5430_ES1_0)) + if (warm_reset() && + (is_omap44xx() || (omap_revision() == OMAP5430_ES1_0))) force_emif_self_refresh(); #endif watchdog_init(); diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c index 5bc7e1f19b3..fc4290c3c4e 100644 --- a/arch/arm/cpu/armv7/omap-common/mem-common.c +++ b/arch/arm/cpu/armv7/omap-common/mem-common.c @@ -87,9 +87,13 @@ void gpmc_init(void) STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 }; - u32 size = GPMC_SIZE_16M; u32 base = CONFIG_SYS_FLASH_BASE; -#elif defined(CONFIG_NAND) + u32 size = (CONFIG_SYS_FLASH_SIZE > 0x08000000) ? GPMC_SIZE_256M : + /* > 64MB */ ((CONFIG_SYS_FLASH_SIZE > 0x04000000) ? GPMC_SIZE_128M : + /* > 32MB */ ((CONFIG_SYS_FLASH_SIZE > 0x02000000) ? GPMC_SIZE_64M : + /* > 16MB */ ((CONFIG_SYS_FLASH_SIZE > 0x01000000) ? GPMC_SIZE_32M : + /* min 16MB */ GPMC_SIZE_16M))); +#elif defined(CONFIG_NAND) || defined(CONFIG_CMD_NAND) /* configure GPMC for NAND */ const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, M_NAND_GPMC_CONFIG2, @@ -99,8 +103,9 @@ void gpmc_init(void) M_NAND_GPMC_CONFIG6, 0 }; - u32 size = GPMC_SIZE_256M; u32 base = CONFIG_SYS_NAND_BASE; + u32 size = GPMC_SIZE_16M; + #elif defined(CONFIG_CMD_ONENAND) const u32 gpmc_regs[GPMC_MAX_REG] = { ONENAND_GPMC_CONFIG1, ONENAND_GPMC_CONFIG2, @@ -110,8 +115,8 @@ void gpmc_init(void) ONENAND_GPMC_CONFIG6, 0 }; - u32 base = PISMO1_ONEN_BASE; - u32 size = PISMO1_ONEN_SIZE; + u32 size = GPMC_SIZE_128M; + u32 base = CONFIG_SYS_ONENAND_BASE; #else const u32 gpmc_regs[GPMC_MAX_REG] = { 0, 0, 0, 0, 0, 0, 0 }; u32 size = 0; diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c deleted file mode 100644 index 1832affa5bb..00000000000 --- a/arch/arm/cpu/armv7/omap3/mem.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * (C) Copyright 2008 - * Texas Instruments, <www.ti.com> - * - * Author : - * Manikandan Pillai <mani.pillai@ti.com> - * - * Initial Code from: - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <khasim@ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/mem.h> -#include <asm/arch/sys_proto.h> -#include <command.h> - -struct gpmc *gpmc_cfg; - -#if defined(CONFIG_CMD_NAND) -static const u32 gpmc_m_nand[GPMC_MAX_REG] = { - M_NAND_GPMC_CONFIG1, - M_NAND_GPMC_CONFIG2, - M_NAND_GPMC_CONFIG3, - M_NAND_GPMC_CONFIG4, - M_NAND_GPMC_CONFIG5, - M_NAND_GPMC_CONFIG6, 0 -}; -#endif /* CONFIG_CMD_NAND */ - -#if defined(CONFIG_CMD_ONENAND) -static const u32 gpmc_onenand[GPMC_MAX_REG] = { - ONENAND_GPMC_CONFIG1, - ONENAND_GPMC_CONFIG2, - ONENAND_GPMC_CONFIG3, - ONENAND_GPMC_CONFIG4, - ONENAND_GPMC_CONFIG5, - ONENAND_GPMC_CONFIG6, 0 -}; -#endif /* CONFIG_CMD_ONENAND */ - -/******************************************************** - * mem_ok() - test used to see if timings are correct - * for a part. Helps in guessing which part - * we are currently using. - *******************************************************/ -u32 mem_ok(u32 cs) -{ - u32 val1, val2, addr; - u32 pattern = 0x12345678; - - addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs); - - writel(0x0, addr + 0x400); /* clear pos A */ - writel(pattern, addr); /* pattern to pos B */ - writel(0x0, addr + 4); /* remove pattern off the bus */ - val1 = readl(addr + 0x400); /* get pos A value */ - val2 = readl(addr); /* get val2 */ - writel(0x0, addr + 0x400); /* clear pos A */ - - if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */ - return 0; - else - return 1; -} - -void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, - u32 size) -{ - writel(0, &cs->config7); - sdelay(1000); - /* Delay for settling */ - writel(gpmc_config[0], &cs->config1); - writel(gpmc_config[1], &cs->config2); - writel(gpmc_config[2], &cs->config3); - writel(gpmc_config[3], &cs->config4); - writel(gpmc_config[4], &cs->config5); - writel(gpmc_config[5], &cs->config6); - - /* - * Enable the config. size is the CS size and goes in - * bits 11:8. We set bit 6 to enable this CS and the base - * address goes into bits 5:0. - */ - writel((size << 8) | (GPMC_CS_ENABLE << 6) | - ((base >> 24) & GPMC_BASEADDR_MASK), - &cs->config7); - sdelay(2000); -} - -/***************************************************** - * gpmc_init(): init gpmc bus - * Init GPMC for x16, MuxMode (SDRAM in x32). - * This code can only be executed from SRAM or SDRAM. - *****************************************************/ -void gpmc_init(void) -{ - /* putting a blanket check on GPMC based on ZeBu for now */ - gpmc_cfg = (struct gpmc *)GPMC_BASE; -#if defined(CONFIG_CMD_NAND) || defined(CONFIG_CMD_ONENAND) - const u32 *gpmc_config = NULL; - u32 base = 0; - u32 size = 0; -#endif - u32 config = 0; - - /* global settings */ - writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */ - writel(0, &gpmc_cfg->timeout_control);/* timeout disable */ - - config = readl(&gpmc_cfg->config); - config &= (~0xf00); - writel(config, &gpmc_cfg->config); - - /* - * Disable the GPMC0 config set by ROM code - * It conflicts with our MPDB (both at 0x08000000) - */ - writel(0, &gpmc_cfg->cs[0].config7); - sdelay(1000); - -#if defined(CONFIG_CMD_NAND) /* CS 0 */ - gpmc_config = gpmc_m_nand; - - base = PISMO1_NAND_BASE; - size = PISMO1_NAND_SIZE; - enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); -#endif - -#if defined(CONFIG_CMD_ONENAND) - gpmc_config = gpmc_onenand; - base = PISMO1_ONEN_BASE; - size = PISMO1_ONEN_SIZE; - enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); -#endif -} diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 4d899528f5b..97bbfe2e65e 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -33,11 +33,7 @@ #define MT47H128M16RT25E_EMIF_SDCFG 0x41805332 #define MT47H128M16RT25E_EMIF_SDREF 0x0000081a #define MT47H128M16RT25E_RATIO 0x80 -#define MT47H128M16RT25E_INVERT_CLKOUT 0x00 #define MT47H128M16RT25E_RD_DQS 0x12 -#define MT47H128M16RT25E_WR_DQS 0x00 -#define MT47H128M16RT25E_PHY_WRLVL 0x00 -#define MT47H128M16RT25E_PHY_GATELVL 0x00 #define MT47H128M16RT25E_PHY_WR_DATA 0x40 #define MT47H128M16RT25E_PHY_FIFO_WE 0x80 #define MT47H128M16RT25E_IOCTRL_VALUE 0x18B diff --git a/arch/arm/include/asm/arch-am33xx/mem.h b/arch/arm/include/asm/arch-am33xx/mem.h index e7e8c58b000..b2412b56e15 100644 --- a/arch/arm/include/asm/arch-am33xx/mem.h +++ b/arch/arm/include/asm/arch-am33xx/mem.h @@ -59,13 +59,6 @@ /* max number of GPMC regs */ #define GPMC_MAX_REG 7 -#define PISMO1_NOR 1 -#define PISMO1_NAND 2 -#define PISMO2_CS0 3 -#define PISMO2_CS1 4 -#define PISMO1_ONENAND 5 #define DBG_MPDB 6 -#define PISMO2_NAND_CS0 7 -#define PISMO2_NAND_CS1 8 #endif /* endif _MEM_H_ */ diff --git a/arch/arm/include/asm/arch-keystone/clock-k2e.h b/arch/arm/include/asm/arch-keystone/clock-k2e.h new file mode 100644 index 00000000000..41478110e5a --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/clock-k2e.h @@ -0,0 +1,68 @@ +/* + * K2E: Clock management APIs + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_CLOCK_K2E_H +#define __ASM_ARCH_CLOCK_K2E_H + +enum ext_clk_e { + sys_clk, + alt_core_clk, + pa_clk, + ddr3_clk, + mcm_clk, + pcie_clk, + sgmii_clk, + xgmii_clk, + usb_clk, + ext_clk_count /* number of external clocks */ +}; + +extern unsigned int external_clk[ext_clk_count]; + +enum clk_e { + core_pll_clk, + pass_pll_clk, + ddr3_pll_clk, + sys_clk0_clk, + sys_clk0_1_clk, + sys_clk0_2_clk, + sys_clk0_3_clk, + sys_clk0_4_clk, + sys_clk0_6_clk, + sys_clk0_8_clk, + sys_clk0_12_clk, + sys_clk0_24_clk, + sys_clk1_clk, + sys_clk1_3_clk, + sys_clk1_4_clk, + sys_clk1_6_clk, + sys_clk1_12_clk, + sys_clk2_clk, + sys_clk3_clk +}; + +#define KS2_CLK1_6 sys_clk0_6_clk + +/* PLL identifiers */ +enum pll_type_e { + CORE_PLL, + PASS_PLL, + DDR3_PLL, +}; + +#define CORE_PLL_800 {CORE_PLL, 16, 1, 2} +#define CORE_PLL_1000 {CORE_PLL, 20, 1, 2} +#define CORE_PLL_1200 {CORE_PLL, 24, 1, 2} +#define PASS_PLL_1000 {PASS_PLL, 20, 1, 2} +#define DDR3_PLL_200 {DDR3_PLL, 4, 1, 2} +#define DDR3_PLL_400 {DDR3_PLL, 16, 1, 4} +#define DDR3_PLL_800 {DDR3_PLL, 16, 1, 2} +#define DDR3_PLL_333 {DDR3_PLL, 20, 1, 6} + +#endif diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h index 6a69a8d2bed..784a0be5675 100644 --- a/arch/arm/include/asm/arch-keystone/clock-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h @@ -10,10 +10,6 @@ #ifndef __ASM_ARCH_CLOCK_K2HK_H #define __ASM_ARCH_CLOCK_K2HK_H -#include <asm/arch/hardware.h> - -#ifndef __ASSEMBLY__ - enum ext_clk_e { sys_clk, alt_core_clk, @@ -56,7 +52,7 @@ enum clk_e { sys_clk3_clk }; -#define K2HK_CLK1_6 sys_clk0_6_clk +#define KS2_CLK1_6 sys_clk0_6_clk /* PLL identifiers */ enum pll_type_e { @@ -66,15 +62,6 @@ enum pll_type_e { DDR3A_PLL, DDR3B_PLL, }; -#define MAIN_PLL CORE_PLL - -/* PLL configuration data */ -struct pll_init_data { - int pll; - int pll_m; /* PLL Multiplier */ - int pll_d; /* PLL divider */ - int pll_od; /* PLL output divider */ -}; #define CORE_PLL_799 {CORE_PLL, 13, 1, 2} #define CORE_PLL_983 {CORE_PLL, 16, 1, 2} @@ -98,12 +85,4 @@ struct pll_init_data { #define DDR3_PLL_800(x) {DDR3##x##_PLL, 16, 1, 2} #define DDR3_PLL_333(x) {DDR3##x##_PLL, 20, 1, 6} -void init_plls(int num_pll, struct pll_init_data *config); -void init_pll(const struct pll_init_data *data); -unsigned long clk_get_rate(unsigned int clk); -unsigned long clk_round_rate(unsigned int clk, unsigned long hz); -int clk_set_rate(unsigned int clk, unsigned long hz); - -#endif - #endif diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h index 324501b75ae..1513c76b6a0 100644 --- a/arch/arm/include/asm/arch-keystone/clock.h +++ b/arch/arm/include/asm/arch-keystone/clock.h @@ -10,8 +10,40 @@ #ifndef __ASM_ARCH_CLOCK_H #define __ASM_ARCH_CLOCK_H +#ifndef __ASSEMBLY__ + #ifdef CONFIG_SOC_K2HK #include <asm/arch/clock-k2hk.h> #endif +#ifdef CONFIG_SOC_K2E +#include <asm/arch/clock-k2e.h> +#endif + +#define MAIN_PLL CORE_PLL + +#include <asm/types.h> + +struct keystone_pll_regs { + u32 reg0; + u32 reg1; +}; + +/* PLL configuration data */ +struct pll_init_data { + int pll; + int pll_m; /* PLL Multiplier */ + int pll_d; /* PLL divider */ + int pll_od; /* PLL output divider */ +}; + +extern const struct keystone_pll_regs keystone_pll_regs[]; + +void init_plls(int num_pll, struct pll_init_data *config); +void init_pll(const struct pll_init_data *data); +unsigned long clk_get_rate(unsigned int clk); +unsigned long clk_round_rate(unsigned int clk, unsigned long hz); +int clk_set_rate(unsigned int clk, unsigned long hz); + +#endif #endif diff --git a/arch/arm/include/asm/arch-keystone/clock_defs.h b/arch/arm/include/asm/arch-keystone/clock_defs.h index b251aff3832..e545341ca7c 100644 --- a/arch/arm/include/asm/arch-keystone/clock_defs.h +++ b/arch/arm/include/asm/arch-keystone/clock_defs.h @@ -50,7 +50,7 @@ struct pllctl_regs { }; static struct pllctl_regs *pllctl_regs[] = { - (struct pllctl_regs *)(CLOCK_BASE + 0x100) + (struct pllctl_regs *)(KS2_CLOCK_BASE + 0x100) }; #define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg)) diff --git a/arch/arm/include/asm/arch-keystone/ddr3.h b/arch/arm/include/asm/arch-keystone/ddr3.h new file mode 100644 index 00000000000..4d229a25fa1 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/ddr3.h @@ -0,0 +1,56 @@ +/* + * DDR3 + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _DDR3_H_ +#define _DDR3_H_ + +#include <asm/arch/hardware.h> + +struct ddr3_phy_config { + unsigned int pllcr; + unsigned int pgcr1_mask; + unsigned int pgcr1_val; + unsigned int ptr0; + unsigned int ptr1; + unsigned int ptr2; + unsigned int ptr3; + unsigned int ptr4; + unsigned int dcr_mask; + unsigned int dcr_val; + unsigned int dtpr0; + unsigned int dtpr1; + unsigned int dtpr2; + unsigned int mr0; + unsigned int mr1; + unsigned int mr2; + unsigned int dtcr; + unsigned int pgcr2; + unsigned int zq0cr1; + unsigned int zq1cr1; + unsigned int zq2cr1; + unsigned int pir_v1; + unsigned int pir_v2; +}; + +struct ddr3_emif_config { + unsigned int sdcfg; + unsigned int sdtim1; + unsigned int sdtim2; + unsigned int sdtim3; + unsigned int sdtim4; + unsigned int zqcfg; + unsigned int sdrfc; +}; + +void ddr3_init(void); +void ddr3_reset_ddrphy(void); +void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg); +void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg); + +#endif diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2e.h b/arch/arm/include/asm/arch-keystone/hardware-k2e.h new file mode 100644 index 00000000000..62172a4b84d --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/hardware-k2e.h @@ -0,0 +1,44 @@ +/* + * K2E: SoC definitions + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_HARDWARE_K2E_H +#define __ASM_ARCH_HARDWARE_K2E_H + +/* PA SS Registers */ +#define KS2_PASS_BASE 0x24000000 + +/* Power and Sleep Controller (PSC) Domains */ +#define KS2_LPSC_MOD_RST 0 +#define KS2_LPSC_USB_1 1 +#define KS2_LPSC_USB 2 +#define KS2_LPSC_EMIF25_SPI 3 +#define KS2_LPSC_TSIP 4 +#define KS2_LPSC_DEBUGSS_TRC 5 +#define KS2_LPSC_TETB_TRC 6 +#define KS2_LPSC_PKTPROC 7 +#define KS2_LPSC_PA KS2_LPSC_PKTPROC +#define KS2_LPSC_SGMII 8 +#define KS2_LPSC_CPGMAC KS2_LPSC_SGMII +#define KS2_LPSC_CRYPTO 9 +#define KS2_LPSC_PCIE 10 +#define KS2_LPSC_VUSR0 12 +#define KS2_LPSC_CHIP_SRSS 13 +#define KS2_LPSC_MSMC 14 +#define KS2_LPSC_EMIF4F_DDR3 23 +#define KS2_LPSC_PCIE_1 27 +#define KS2_LPSC_XGE 50 + +/* Chip Interrupt Controller */ +#define KS2_CIC2_DDR3_ECC_IRQ_NUM -1 /* not defined in K2E */ +#define KS2_CIC2_DDR3_ECC_CHAN_NUM -1 /* not defined in K2E */ + +/* Number of DSP cores */ +#define KS2_NUM_DSPS 1 + +#endif diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h index 50ce649d4c0..eb132f73e60 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h @@ -6,136 +6,82 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #ifndef __ASM_ARCH_HARDWARE_K2HK_H #define __ASM_ARCH_HARDWARE_K2HK_H -#define K2HK_PLL_CNTRL_BASE 0x02310000 -#define CLOCK_BASE K2HK_PLL_CNTRL_BASE -#define KS2_RSTCTRL (K2HK_PLL_CNTRL_BASE + 0xe8) -#define KS2_RSTCTRL_KEY 0x5a69 -#define KS2_RSTCTRL_MASK 0xffff0000 -#define KS2_RSTCTRL_SWRST 0xfffe0000 - -#define K2HK_PSC_BASE 0x02350000 -#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000 -#define JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18) -#define K2HK_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20) - -#define K2HK_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c) - -#define ARM_PLL_EN BIT(13) +#define KS2_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c) -#define K2HK_SPI0_BASE 0x21000400 -#define K2HK_SPI1_BASE 0x21000600 -#define K2HK_SPI2_BASE 0x21000800 -#define K2HK_SPI_BASE K2HK_SPI0_BASE - -/* Chip configuration unlock codes and registers */ -#define KEYSTONE_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38) -#define KEYSTONE_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c) -#define KEYSTONE_KICK0_MAGIC 0x83e70b13 -#define KEYSTONE_KICK1_MAGIC 0x95a4f1e0 +#define KS2_ARM_PLL_EN BIT(13) /* PA SS Registers */ -#define KS2_PASS_BASE 0x02000000 +#define KS2_PASS_BASE 0x02000000 /* PLL control registers */ -#define K2HK_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350) -#define K2HK_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354) -#define K2HK_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358) -#define K2HK_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C) -#define K2HK_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360) -#define K2HK_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364) -#define K2HK_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368) -#define K2HK_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C) -#define K2HK_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370) -#define K2HK_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374) +#define KS2_DDR3BPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x368) +#define KS2_DDR3BPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x36C) /* Power and Sleep Controller (PSC) Domains */ -#define K2HK_LPSC_MOD 0 -#define K2HK_LPSC_DUMMY1 1 -#define K2HK_LPSC_USB 2 -#define K2HK_LPSC_EMIF25_SPI 3 -#define K2HK_LPSC_TSIP 4 -#define K2HK_LPSC_DEBUGSS_TRC 5 -#define K2HK_LPSC_TETB_TRC 6 -#define K2HK_LPSC_PKTPROC 7 -#define KS2_LPSC_PA K2HK_LPSC_PKTPROC -#define K2HK_LPSC_SGMII 8 -#define KS2_LPSC_CPGMAC K2HK_LPSC_SGMII -#define K2HK_LPSC_CRYPTO 9 -#define K2HK_LPSC_PCIE 10 -#define K2HK_LPSC_SRIO 11 -#define K2HK_LPSC_VUSR0 12 -#define K2HK_LPSC_CHIP_SRSS 13 -#define K2HK_LPSC_MSMC 14 -#define K2HK_LPSC_GEM_0 15 -#define K2HK_LPSC_GEM_1 16 -#define K2HK_LPSC_GEM_2 17 -#define K2HK_LPSC_GEM_3 18 -#define K2HK_LPSC_GEM_4 19 -#define K2HK_LPSC_GEM_5 20 -#define K2HK_LPSC_GEM_6 21 -#define K2HK_LPSC_GEM_7 22 -#define K2HK_LPSC_EMIF4F_DDR3A 23 -#define K2HK_LPSC_EMIF4F_DDR3B 24 -#define K2HK_LPSC_TAC 25 -#define K2HK_LPSC_RAC 26 -#define K2HK_LPSC_RAC_1 27 -#define K2HK_LPSC_FFTC_A 28 -#define K2HK_LPSC_FFTC_B 29 -#define K2HK_LPSC_FFTC_C 30 -#define K2HK_LPSC_FFTC_D 31 -#define K2HK_LPSC_FFTC_E 32 -#define K2HK_LPSC_FFTC_F 33 -#define K2HK_LPSC_AI2 34 -#define K2HK_LPSC_TCP3D_0 35 -#define K2HK_LPSC_TCP3D_1 36 -#define K2HK_LPSC_TCP3D_2 37 -#define K2HK_LPSC_TCP3D_3 38 -#define K2HK_LPSC_VCP2X4_A 39 -#define K2HK_LPSC_CP2X4_B 40 -#define K2HK_LPSC_VCP2X4_C 41 -#define K2HK_LPSC_VCP2X4_D 42 -#define K2HK_LPSC_VCP2X4_E 43 -#define K2HK_LPSC_VCP2X4_F 44 -#define K2HK_LPSC_VCP2X4_G 45 -#define K2HK_LPSC_VCP2X4_H 46 -#define K2HK_LPSC_BCP 47 -#define K2HK_LPSC_DXB 48 -#define K2HK_LPSC_VUSR1 49 -#define K2HK_LPSC_XGE 50 -#define K2HK_LPSC_ARM_SREFLEX 51 -#define K2HK_LPSC_TETRIS 52 +#define KS2_LPSC_MOD 0 +#define KS2_LPSC_DUMMY1 1 +#define KS2_LPSC_USB 2 +#define KS2_LPSC_EMIF25_SPI 3 +#define KS2_LPSC_TSIP 4 +#define KS2_LPSC_DEBUGSS_TRC 5 +#define KS2_LPSC_TETB_TRC 6 +#define KS2_LPSC_PKTPROC 7 +#define KS2_LPSC_PA KS2_LPSC_PKTPROC +#define KS2_LPSC_SGMII 8 +#define KS2_LPSC_CPGMAC KS2_LPSC_SGMII +#define KS2_LPSC_CRYPTO 9 +#define KS2_LPSC_PCIE 10 +#define KS2_LPSC_SRIO 11 +#define KS2_LPSC_VUSR0 12 +#define KS2_LPSC_CHIP_SRSS 13 +#define KS2_LPSC_MSMC 14 +#define KS2_LPSC_GEM_1 16 +#define KS2_LPSC_GEM_2 17 +#define KS2_LPSC_GEM_3 18 +#define KS2_LPSC_GEM_4 19 +#define KS2_LPSC_GEM_5 20 +#define KS2_LPSC_GEM_6 21 +#define KS2_LPSC_GEM_7 22 +#define KS2_LPSC_EMIF4F_DDR3A 23 +#define KS2_LPSC_EMIF4F_DDR3B 24 +#define KS2_LPSC_TAC 25 +#define KS2_LPSC_RAC 26 +#define KS2_LPSC_RAC_1 27 +#define KS2_LPSC_FFTC_A 28 +#define KS2_LPSC_FFTC_B 29 +#define KS2_LPSC_FFTC_C 30 +#define KS2_LPSC_FFTC_D 31 +#define KS2_LPSC_FFTC_E 32 +#define KS2_LPSC_FFTC_F 33 +#define KS2_LPSC_AI2 34 +#define KS2_LPSC_TCP3D_0 35 +#define KS2_LPSC_TCP3D_1 36 +#define KS2_LPSC_TCP3D_2 37 +#define KS2_LPSC_TCP3D_3 38 +#define KS2_LPSC_VCP2X4_A 39 +#define KS2_LPSC_CP2X4_B 40 +#define KS2_LPSC_VCP2X4_C 41 +#define KS2_LPSC_VCP2X4_D 42 +#define KS2_LPSC_VCP2X4_E 43 +#define KS2_LPSC_VCP2X4_F 44 +#define KS2_LPSC_VCP2X4_G 45 +#define KS2_LPSC_VCP2X4_H 46 +#define KS2_LPSC_BCP 47 +#define KS2_LPSC_DXB 48 +#define KS2_LPSC_VUSR1 49 +#define KS2_LPSC_XGE 50 +#define KS2_LPSC_ARM_SREFLEX 51 -/* DDR3A definitions */ -#define K2HK_DDR3A_EMIF_CTRL_BASE 0x21010000 -#define K2HK_DDR3A_EMIF_DATA_BASE 0x80000000 -#define K2HK_DDR3A_DDRPHYC 0x02329000 /* DDR3B definitions */ -#define K2HK_DDR3B_EMIF_CTRL_BASE 0x21020000 -#define K2HK_DDR3B_EMIF_DATA_BASE 0x60000000 -#define K2HK_DDR3B_DDRPHYC 0x02328000 - -/* Queue manager */ -#define DEVICE_QM_MANAGER_BASE 0x02a02000 -#define DEVICE_QM_DESC_SETUP_BASE 0x02a03000 -#define DEVICE_QM_MANAGER_QUEUES_BASE 0x02a80000 -#define DEVICE_QM_MANAGER_Q_PROXY_BASE 0x02ac0000 -#define DEVICE_QM_QUEUE_STATUS_BASE 0x02a40000 -#define DEVICE_QM_NUM_LINKRAMS 2 -#define DEVICE_QM_NUM_MEMREGIONS 20 - -#define DEVICE_PA_CDMA_GLOBAL_CFG_BASE 0x02004000 -#define DEVICE_PA_CDMA_TX_CHAN_CFG_BASE 0x02004400 -#define DEVICE_PA_CDMA_RX_CHAN_CFG_BASE 0x02004800 -#define DEVICE_PA_CDMA_RX_FLOW_CFG_BASE 0x02005000 - -#define DEVICE_PA_CDMA_RX_NUM_CHANNELS 24 -#define DEVICE_PA_CDMA_RX_NUM_FLOWS 32 -#define DEVICE_PA_CDMA_TX_NUM_CHANNELS 9 +#define KS2_DDR3B_EMIF_CTRL_BASE 0x21020000 +#define KS2_DDR3B_EMIF_DATA_BASE 0x60000000 +#define KS2_DDR3B_DDRPHYC 0x02328000 -/* MSMC control */ -#define K2HK_MSMC_CTRL_BASE 0x0bc00000 +/* Number of DSP cores */ +#define KS2_NUM_DSPS 8 #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index ffdecbfcd6d..ddeb06e7bb7 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -22,42 +22,6 @@ typedef volatile unsigned int dv_reg; typedef volatile unsigned int *dv_reg_p; -struct ddr3_phy_config { - unsigned int pllcr; - unsigned int pgcr1_mask; - unsigned int pgcr1_val; - unsigned int ptr0; - unsigned int ptr1; - unsigned int ptr2; - unsigned int ptr3; - unsigned int ptr4; - unsigned int dcr_mask; - unsigned int dcr_val; - unsigned int dtpr0; - unsigned int dtpr1; - unsigned int dtpr2; - unsigned int mr0; - unsigned int mr1; - unsigned int mr2; - unsigned int dtcr; - unsigned int pgcr2; - unsigned int zq0cr1; - unsigned int zq1cr1; - unsigned int zq2cr1; - unsigned int pir_v1; - unsigned int pir_v2; -}; - -struct ddr3_emif_config { - unsigned int sdcfg; - unsigned int sdtim1; - unsigned int sdtim2; - unsigned int sdtim3; - unsigned int sdtim4; - unsigned int zqcfg; - unsigned int sdrfc; -}; - #endif #define BIT(x) (1 << (x)) @@ -105,6 +69,11 @@ struct ddr3_emif_config { #define NOSRA_MASK 0x08000000 #define ECC_MASK 0x00000001 +/* DDR3 definitions */ +#define KS2_DDR3A_EMIF_CTRL_BASE 0x21010000 +#define KS2_DDR3A_EMIF_DATA_BASE 0x80000000 +#define KS2_DDR3A_DDRPHYC 0x02329000 + #define KS2_DDR3_MIDR_OFFSET 0x00 #define KS2_DDR3_STATUS_OFFSET 0x04 #define KS2_DDR3_SDCFG_OFFSET 0x08 @@ -116,39 +85,103 @@ struct ddr3_emif_config { #define KS2_DDR3_PMCTL_OFFSET 0x38 #define KS2_DDR3_ZQCFG_OFFSET 0xC8 +#define KS2_DDR3_PLLCTRL_PHY_RESET 0x80000000 + #define KS2_UART0_BASE 0x02530c00 #define KS2_UART1_BASE 0x02531000 +/* Boot Config */ +#define KS2_DEVICE_STATE_CTRL_BASE 0x02620000 +#define KS2_JTAG_ID_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x18) +#define KS2_DEVSTAT (KS2_DEVICE_STATE_CTRL_BASE + 0x20) + +/* PSC */ +#define KS2_PSC_BASE 0x02350000 +#define KS2_LPSC_GEM_0 15 +#define KS2_LPSC_TETRIS 52 +#define KS2_TETRIS_PWR_DOMAIN 31 + +/* Chip configuration unlock codes and registers */ +#define KS2_KICK0 (KS2_DEVICE_STATE_CTRL_BASE + 0x38) +#define KS2_KICK1 (KS2_DEVICE_STATE_CTRL_BASE + 0x3c) +#define KS2_KICK0_MAGIC 0x83e70b13 +#define KS2_KICK1_MAGIC 0x95a4f1e0 + +/* PLL control registers */ +#define KS2_MAINPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x350) +#define KS2_MAINPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x354) +#define KS2_PASSPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x358) +#define KS2_PASSPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x35C) +#define KS2_DDR3APLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x360) +#define KS2_DDR3APLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x364) +#define KS2_ARMPLLCTL0 (KS2_DEVICE_STATE_CTRL_BASE + 0x370) +#define KS2_ARMPLLCTL1 (KS2_DEVICE_STATE_CTRL_BASE + 0x374) + +#define KS2_PLL_CNTRL_BASE 0x02310000 +#define KS2_CLOCK_BASE KS2_PLL_CNTRL_BASE +#define KS2_RSTCTRL_RSTYPE (KS2_PLL_CNTRL_BASE + 0xe4) +#define KS2_RSTCTRL (KS2_PLL_CNTRL_BASE + 0xe8) +#define KS2_RSTCTRL_KEY 0x5a69 +#define KS2_RSTCTRL_MASK 0xffff0000 +#define KS2_RSTCTRL_SWRST 0xfffe0000 + +/* SPI */ +#define KS2_SPI0_BASE 0x21000400 +#define KS2_SPI1_BASE 0x21000600 +#define KS2_SPI2_BASE 0x21000800 +#define KS2_SPI_BASE KS2_SPI0_BASE + /* AEMIF */ #define KS2_AEMIF_CNTRL_BASE 0x21000a00 #define DAVINCI_ASYNC_EMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE +/* Flag from ks2_debug options to check if DSPs need to stay ON */ +#define DBG_LEAVE_DSPS_ON 0x1 + +/* Queue manager */ +#define KS2_QM_MANAGER_BASE 0x02a02000 +#define KS2_QM_DESC_SETUP_BASE 0x02a03000 +#define KS2_QM_MANAGER_QUEUES_BASEi 0x02a80000 +#define KS2_QM_MANAGER_Q_PROXY_BASE 0x02ac0000 +#define KS2_QM_QUEUE_STATUS_BASE 0x02a40000 + +/* MSMC control */ +#define KS2_MSMC_CTRL_BASE 0x0bc00000 + #ifdef CONFIG_SOC_K2HK #include <asm/arch/hardware-k2hk.h> #endif +#ifdef CONFIG_SOC_K2E +#include <asm/arch/hardware-k2e.h> +#endif + #ifndef __ASSEMBLY__ static inline int cpu_is_k2hk(void) { - unsigned int jtag_id = __raw_readl(JTAG_ID_REG); + unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG); unsigned int part_no = (jtag_id >> 12) & 0xffff; return (part_no == 0xb981) ? 1 : 0; } +static inline int cpu_is_k2e(void) +{ + unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG); + unsigned int part_no = (jtag_id >> 12) & 0xffff; + + return (part_no == 0xb9a6) ? 1 : 0; +} + static inline int cpu_revision(void) { - unsigned int jtag_id = __raw_readl(JTAG_ID_REG); + unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG); unsigned int rev = (jtag_id >> 28) & 0xf; return rev; } -void share_all_segments(int priv_id); int cpu_to_bus(u32 *ptr, u32 length); -void init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg); -void init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg); -void init_ddr3(void); void sdelay(unsigned long); #endif diff --git a/arch/arm/include/asm/arch-keystone/mon.h b/arch/arm/include/asm/arch-keystone/mon.h new file mode 100644 index 00000000000..33a28764bc9 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/mon.h @@ -0,0 +1,15 @@ +/* + * K2HK: secure kernel command header file + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MON_H_ +#define _MON_H_ + +int mon_power_off(int core_id); + +#endif diff --git a/arch/arm/include/asm/arch-keystone/msmc.h b/arch/arm/include/asm/arch-keystone/msmc.h new file mode 100644 index 00000000000..c320db5b65c --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/msmc.h @@ -0,0 +1,17 @@ +/* + * MSMC controller + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MSMC_H_ +#define _MSMC_H_ + +#include <asm/arch/hardware.h> + +void msmc_share_all_segments(int priv_id); + +#endif diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h index 4d06ef83fee..53cc2b098a0 100644 --- a/arch/arm/include/asm/arch-omap3/cpu.h +++ b/arch/arm/include/asm/arch-omap3/cpu.h @@ -98,7 +98,6 @@ struct ctrl_id { #define DEBUG_BASE 0x08000000 /* debug board */ #define NAND_BASE 0x30000000 /* NAND addr */ /* (actual size small port) */ -#define PISMO2_BASE 0x18000000 /* PISMO2 CS1/2 */ #define ONENAND_MAP 0x20000000 /* OneNand addr */ /* (actual size small port) */ /* SMS */ diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index d2dfb1e19aa..0b78c1ca60f 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -427,20 +427,7 @@ enum { /* max number of GPMC regs */ #define GPMC_MAX_REG 7 -#define PISMO1_NOR 1 -#define PISMO1_NAND 2 -#define PISMO2_CS0 3 -#define PISMO2_CS1 4 -#define PISMO1_ONENAND 5 #define DBG_MPDB 6 -#define PISMO2_NAND_CS0 7 -#define PISMO2_NAND_CS1 8 - -/* make it readable for the gpmc_init */ -#define PISMO1_NOR_BASE FLASH_BASE -#define PISMO1_NAND_BASE NAND_BASE -#define PISMO2_CS0_BASE PISMO2_MAP1 -#define PISMO1_ONEN_BASE ONENAND_MAP #define DBG_MPDB_BASE DEBUG_BASE #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index d1344ee94c3..183823404d5 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -595,6 +595,14 @@ static inline u32 omap_revision(void) return *omap_si_rev; } +#define OMAP44xx 0x44000000 + +static inline u8 is_omap44xx(void) +{ + extern u32 *const omap_si_rev; + return (*omap_si_rev & 0xFF000000) == OMAP44xx; +}; + #define OMAP54xx 0x54000000 static inline u8 is_omap54xx(void) diff --git a/board/gumstix/pepper/board.c b/board/gumstix/pepper/board.c index 75aac49fd0e..f644f8188bc 100644 --- a/board/gumstix/pepper/board.c +++ b/board/gumstix/pepper/board.c @@ -34,41 +34,17 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SPL_BUILD static const struct ddr_data ddr2_data = { - .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | - (MT47H128M16RT25E_RD_DQS<<20) | - (MT47H128M16RT25E_RD_DQS<<10) | - (MT47H128M16RT25E_RD_DQS<<0)), - .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | - (MT47H128M16RT25E_WR_DQS<<20) | - (MT47H128M16RT25E_WR_DQS<<10) | - (MT47H128M16RT25E_WR_DQS<<0)), - .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | - (MT47H128M16RT25E_PHY_WRLVL<<20) | - (MT47H128M16RT25E_PHY_WRLVL<<10) | - (MT47H128M16RT25E_PHY_WRLVL<<0)), - .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | - (MT47H128M16RT25E_PHY_GATELVL<<20) | - (MT47H128M16RT25E_PHY_GATELVL<<10) | - (MT47H128M16RT25E_PHY_GATELVL<<0)), - .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | - (MT47H128M16RT25E_PHY_FIFO_WE<<20) | - (MT47H128M16RT25E_PHY_FIFO_WE<<10) | - (MT47H128M16RT25E_PHY_FIFO_WE<<0)), - .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | - (MT47H128M16RT25E_PHY_WR_DATA<<20) | - (MT47H128M16RT25E_PHY_WR_DATA<<10) | - (MT47H128M16RT25E_PHY_WR_DATA<<0)), + .datardsratio0 = MT47H128M16RT25E_RD_DQS, + .datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE, + .datawrsratio0 = MT47H128M16RT25E_PHY_WR_DATA, }; static const struct cmd_control ddr2_cmd_ctrl_data = { .cmd0csratio = MT47H128M16RT25E_RATIO, - .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, .cmd1csratio = MT47H128M16RT25E_RATIO, - .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, .cmd2csratio = MT47H128M16RT25E_RATIO, - .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, }; static const struct emif_regs ddr2_emif_reg_data = { diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index da780edb896..d81eec90b44 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -84,41 +84,17 @@ static int read_eeprom(struct am335x_baseboard_id *header) #ifndef CONFIG_SKIP_LOWLEVEL_INIT static const struct ddr_data ddr2_data = { - .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | - (MT47H128M16RT25E_RD_DQS<<20) | - (MT47H128M16RT25E_RD_DQS<<10) | - (MT47H128M16RT25E_RD_DQS<<0)), - .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | - (MT47H128M16RT25E_WR_DQS<<20) | - (MT47H128M16RT25E_WR_DQS<<10) | - (MT47H128M16RT25E_WR_DQS<<0)), - .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | - (MT47H128M16RT25E_PHY_WRLVL<<20) | - (MT47H128M16RT25E_PHY_WRLVL<<10) | - (MT47H128M16RT25E_PHY_WRLVL<<0)), - .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | - (MT47H128M16RT25E_PHY_GATELVL<<20) | - (MT47H128M16RT25E_PHY_GATELVL<<10) | - (MT47H128M16RT25E_PHY_GATELVL<<0)), - .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | - (MT47H128M16RT25E_PHY_FIFO_WE<<20) | - (MT47H128M16RT25E_PHY_FIFO_WE<<10) | - (MT47H128M16RT25E_PHY_FIFO_WE<<0)), - .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | - (MT47H128M16RT25E_PHY_WR_DATA<<20) | - (MT47H128M16RT25E_PHY_WR_DATA<<10) | - (MT47H128M16RT25E_PHY_WR_DATA<<0)), + .datardsratio0 = MT47H128M16RT25E_RD_DQS, + .datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE, + .datawrsratio0 = MT47H128M16RT25E_PHY_WR_DATA, }; static const struct cmd_control ddr2_cmd_ctrl_data = { .cmd0csratio = MT47H128M16RT25E_RATIO, - .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, .cmd1csratio = MT47H128M16RT25E_RATIO, - .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, .cmd2csratio = MT47H128M16RT25E_RATIO, - .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, }; static const struct emif_regs ddr2_emif_reg_data = { diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index 7e239f1c88a..51fa9e04a3f 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -19,6 +19,7 @@ #include <asm/arch/gpio.h> #include <asm/emif.h> #include "board.h" +#include <power/pmic.h> #include <power/tps65218.h> #include <miiphy.h> #include <cpsw.h> @@ -605,6 +606,19 @@ void sdram_init(void) } #endif +/* setup board specific PMIC */ +int power_init_board(void) +{ + struct pmic *p; + + power_tps65218_init(I2C_PMIC); + p = pmic_get("TPS65218_PMIC"); + if (p && !pmic_probe(p)) + puts("PMIC: TPS65218\n"); + + return 0; +} + int board_init(void) { struct l3f_cfg_bwlimiter *bwlimiter = (struct l3f_cfg_bwlimiter *)L3F_CFG_BWLIMITER; diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 7f19655cfeb..ae50d88c579 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -163,6 +163,8 @@ int spl_start_uboot(void) #define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0) #define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0) +extern u32 *const omap_si_rev; + static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -189,7 +191,7 @@ static struct cpsw_platform_data cpsw_data = { .mdio_div = 0xff, .channels = 8, .cpdma_reg_ofs = 0x800, - .slaves = 1, + .slaves = 2, .slave_data = cpsw_slaves, .ale_reg_ofs = 0xd00, .ale_entries = 1024, @@ -260,6 +262,9 @@ int board_eth_init(bd_t *bis) ctrl_val |= 0x22; writel(ctrl_val, (*ctrl)->control_core_control_io1); + if (*omap_si_rev == DRA722_ES1_0) + cpsw_data.active_slave = 1; + ret = cpsw_register(&cpsw_data); if (ret < 0) printf("Error %d registering CPSW switch\n", ret); diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index c9e202af685..7db70324e9b 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -56,6 +56,18 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {RGMII0_RXD2, (IEN | M0) }, {RGMII0_RXD1, (IEN | M0) }, {RGMII0_RXD0, (IEN | M0) }, + {VIN2A_D12, (M3) }, + {VIN2A_D13, (M3) }, + {VIN2A_D14, (M3) }, + {VIN2A_D15, (M3) }, + {VIN2A_D16, (M3) }, + {VIN2A_D17, (M3) }, + {VIN2A_D18, (IEN | M3)}, + {VIN2A_D19, (IEN | M3)}, + {VIN2A_D20, (IEN | M3)}, + {VIN2A_D21, (IEN | M3)}, + {VIN2A_D22, (IEN | M3)}, + {VIN2A_D23, (IEN | M3)}, {GPMC_A13, (IEN | PDIS | M1)}, /* QSPI1_RTCLK */ {GPMC_A14, (IEN | PDIS | M1)}, /* QSPI1_D[3] */ {GPMC_A15, (IEN | PDIS | M1)}, /* QSPI1_D[2] */ diff --git a/board/ti/k2hk_evm/Makefile b/board/ti/k2hk_evm/Makefile deleted file mode 100644 index 3645f2feb01..00000000000 --- a/board/ti/k2hk_evm/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# K2HK-EVM: board Makefile -# (C) Copyright 2012-2014 -# Texas Instruments Incorporated, <www.ti.com> -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += board.o -obj-y += ddr3.o diff --git a/board/ti/k2hk_evm/ddr3.c b/board/ti/k2hk_evm/ddr3.c deleted file mode 100644 index 6092eb8fe33..00000000000 --- a/board/ti/k2hk_evm/ddr3.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Keystone2: DDR3 initialization - * - * (C) Copyright 2012-2014 - * Texas Instruments Incorporated, <www.ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/io.h> -#include <i2c.h> - -/************************* *****************************/ -static struct ddr3_phy_config ddr3phy_1600_64A = { - .pllcr = 0x0001C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0D861A80ul, - .ptr4 = 0x0C827100ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), - .dcr_val = ((1 << 10) | (1 << 27)), - .dtpr0 = 0xA19DBB66ul, - .dtpr1 = 0x12868300ul, - .dtpr2 = 0x50035200ul, - .mr0 = 0x00001C70ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000018ul, - .dtcr = 0x730035C7ul, - .pgcr2 = 0x00F07A12ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1600_64 = { - .sdcfg = 0x6200CE6aul, - .sdtim1 = 0x16709C55ul, - .sdtim2 = 0x00001D4Aul, - .sdtim3 = 0x435DFF54ul, - .sdtim4 = 0x553F0CFFul, - .zqcfg = 0xF0073200ul, - .sdrfc = 0x00001869ul, -}; - -static struct ddr3_phy_config ddr3phy_1600_32 = { - .pllcr = 0x0001C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0D861A80ul, - .ptr4 = 0x0C827100ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), - .dcr_val = ((1 << 10) | (1 << 27)), - .dtpr0 = 0xA19DBB66ul, - .dtpr1 = 0x12868300ul, - .dtpr2 = 0x50035200ul, - .mr0 = 0x00001C70ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000018ul, - .dtcr = 0x730035C7ul, - .pgcr2 = 0x00F07A12ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1600_32 = { - .sdcfg = 0x6200DE6aul, - .sdtim1 = 0x16709C55ul, - .sdtim2 = 0x00001D4Aul, - .sdtim3 = 0x435DFF54ul, - .sdtim4 = 0x553F0CFFul, - .zqcfg = 0x70073200ul, - .sdrfc = 0x00001869ul, -}; - -/************************* *****************************/ -static struct ddr3_phy_config ddr3phy_1333_64A = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | - NOSRA_MASK | UDIMM_MASK), - .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x12857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1333_64 = { - .sdcfg = 0x62008C62ul, - .sdtim1 = 0x125C8044ul, - .sdtim2 = 0x00001D29ul, - .sdtim3 = 0x32CDFF43ul, - .sdtim4 = 0x543F0ADFul, - .zqcfg = 0xF0073200ul, - .sdrfc = 0x00001457ul, -}; - -static struct ddr3_phy_config ddr3phy_1333_32 = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | - NOSRA_MASK | UDIMM_MASK), - .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x12857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; - -static struct ddr3_emif_config ddr3_1333_32 = { - .sdcfg = 0x62009C62ul, - .sdtim1 = 0x125C8044ul, - .sdtim2 = 0x00001D29ul, - .sdtim3 = 0x32CDFF43ul, - .sdtim4 = 0x543F0ADFul, - .zqcfg = 0xf0073200ul, - .sdrfc = 0x00001457ul, -}; - -/************************* *****************************/ -static struct ddr3_phy_config ddr3phy_1333_64 = { - .pllcr = 0x0005C000ul, - .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), - .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), - .ptr0 = 0x42C21590ul, - .ptr1 = 0xD05612C0ul, - .ptr2 = 0, /* not set in gel */ - .ptr3 = 0x0B4515C2ul, - .ptr4 = 0x0A6E08B4ul, - .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), - .dcr_val = ((1 << 10) | (1 << 27)), - .dtpr0 = 0x8558AA55ul, - .dtpr1 = 0x12857280ul, - .dtpr2 = 0x5002C200ul, - .mr0 = 0x00001A60ul, - .mr1 = 0x00000006ul, - .mr2 = 0x00000010ul, - .dtcr = 0x710035C7ul, - .pgcr2 = 0x00F065B8ul, - .zq0cr1 = 0x0000005Dul, - .zq1cr1 = 0x0000005Bul, - .zq2cr1 = 0x0000005Bul, - .pir_v1 = 0x00000033ul, - .pir_v2 = 0x0000FF81ul, -}; -/******************************************************/ -int get_dimm_params(char *dimm_name) -{ - u8 spd_params[256]; - int ret; - int old_bus; - - i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); - - old_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - ret = i2c_read(0x53, 0, 1, spd_params, 256); - - i2c_set_bus_num(old_bus); - - dimm_name[0] = '\0'; - - if (ret) { - puts("Cannot read DIMM params\n"); - return 1; - } - - /* - * We need to convert spd data to dimm parameters - * and to DDR3 EMIF and PHY regirsters values. - * For now we just return DIMM type string value. - * Caller may use this value to choose appropriate - * a pre-set DDR3 configuration - */ - - strncpy(dimm_name, (char *)&spd_params[0x80], 18); - dimm_name[18] = '\0'; - - return 0; -} - -struct pll_init_data ddr3a_333 = DDR3_PLL_333(A); -struct pll_init_data ddr3b_333 = DDR3_PLL_333(B); -struct pll_init_data ddr3a_400 = DDR3_PLL_400(A); -struct pll_init_data ddr3b_400 = DDR3_PLL_400(B); - -void init_ddr3(void) -{ - char dimm_name[32]; - - get_dimm_params(dimm_name); - - printf("Detected SO-DIMM [%s]\n", dimm_name); - - if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { - init_pll(&ddr3a_400); - if (cpu_revision() > 0) { - init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_64A); - init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_64); - printf("DRAM: Capacity 8 GiB (includes reported below)\n"); - } else { - init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_32); - init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_32); - printf("DRAM: Capacity 4 GiB (includes reported below)\n"); - } - } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { - init_pll(&ddr3a_333); - if (cpu_revision() > 0) { - init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_64A); - init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_64); - } else { - init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_32); - init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_32); - } - } else { - printf("Unknown SO-DIMM. Cannot configure DDR3\n"); - while (1) - ; - } - - init_pll(&ddr3b_333); - init_ddrphy(K2HK_DDR3B_DDRPHYC, &ddr3phy_1333_64); - init_ddremif(K2HK_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64); -} diff --git a/board/ti/ks2_evm/Makefile b/board/ti/ks2_evm/Makefile new file mode 100644 index 00000000000..00f1164833c --- /dev/null +++ b/board/ti/ks2_evm/Makefile @@ -0,0 +1,13 @@ +# +# KS2-EVM: board Makefile +# (C) Copyright 2012-2014 +# Texas Instruments Incorporated, <www.ti.com> +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += board.o +obj-y += ddr3_cfg.o +obj-$(CONFIG_K2HK_EVM) += board_k2hk.o +obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o +obj-$(CONFIG_K2E_EVM) += board_k2e.o +obj-$(CONFIG_K2E_EVM) += ddr3_k2e.o diff --git a/board/ti/k2hk_evm/README b/board/ti/ks2_evm/README_K2HK index bfeb05b4a4e..7426b8dc977 100644 --- a/board/ti/k2hk_evm/README +++ b/board/ti/ks2_evm/README_K2HK @@ -38,11 +38,13 @@ board configuration file: include/configs/k2hk_evm.h Supported boot modes: - SPI NOR boot + - AEMIF NAND boot Supported image formats:- - u-boot.bin: for loading and running u-boot.bin through Texas instruments code composure studio (CCS) - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot + - u-boot-nand.gph: gpimage for programming AEMIF NAND flash for NAND boot Build instructions: =================== @@ -55,6 +57,10 @@ To build u-boot-spi.gph >make k2hk_evm_config >make u-boot-spi.gph +To build u-boot-nand.gph + >make k2hk_evm_config + >make u-boot-nand.gph + Load and Run U-Boot on K2HK EVM using CCS ========================================= @@ -115,8 +121,28 @@ instructions:- 5. At the U-Boot console type following to setup u-boot environment variables. setenv addr_uboot 0x87000000 setenv filesize <size in hex of u-boot-spi.gph rounded to hex 0x10000> - run burn_uboot + run burn_uboot_spi Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch to "SPI Little Endian Boot mode" as per instruction at http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup. 6. Power ON the EVM. The EVM now boots with u-boot image on the NOR flash. + +AEMIF NAND Flash programming instructions +====================================== +U-Boot image can be flashed to first 1024KB of the NAND flash using following +instructions:- + +1. Start CCS and run U-boot as described above. +2. Suspend Target. Select Run -> Suspend from top level menu + CortexA15_1 (Free Running)" +3. Load u-boot-nand.gph binary from build folder on to DDR address 0x87000000 + through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM + using CCS", but using address 0x87000000. +4. Free Run the target as desribed earlier (step 4) to get u-boot prompt +5. At the U-Boot console type following to setup u-boot environment variables. + setenv filesize <size in hex of u-boot-nand.gph rounded to hex 0x10000> + run burn_uboot_nand + Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch + to "ARM NAND Boot mode" as per instruction at + http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup. +6. Power ON the EVM. The EVM now boots with u-boot image on the NAND flash. diff --git a/board/ti/k2hk_evm/board.c b/board/ti/ks2_evm/board.c index ef90f9d8213..dfe7be60e71 100644 --- a/board/ti/k2hk_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -1,45 +1,22 @@ /* - * K2HK EVM : Board initialization + * Keystone : Board initialization * - * (C) Copyright 2012-2014 + * (C) Copyright 2014 * Texas Instruments Incorporated, <www.ti.com> * * SPDX-License-Identifier: GPL-2.0+ */ +#include "board.h" #include <common.h> #include <exports.h> #include <fdt_support.h> -#include <libfdt.h> - -#include <asm/arch/hardware.h> -#include <asm/arch/clock.h> -#include <asm/io.h> -#include <asm/mach-types.h> +#include <asm/arch/ddr3.h> #include <asm/arch/emac_defs.h> -#include <asm/arch/psc_defs.h> #include <asm/ti-common/ti-aemif.h> DECLARE_GLOBAL_DATA_PTR; -u32 device_big_endian; - -unsigned int external_clk[ext_clk_count] = { - [sys_clk] = 122880000, - [alt_core_clk] = 125000000, - [pa_clk] = 122880000, - [tetris_clk] = 125000000, - [ddr3a_clk] = 100000000, - [ddr3b_clk] = 100000000, - [mcm_clk] = 312500000, - [pcie_clk] = 100000000, - [sgmii_srio_clk] = 156250000, - [xgmii_clk] = 156250000, - [usb_clk] = 100000000, - [rp1_clk] = 123456789 /* TODO: cannot find - what is that */ -}; - static struct aemif_config aemif_configs[] = { { /* CS0 */ .mode = AEMIF_MODE_NAND, @@ -52,18 +29,11 @@ static struct aemif_config aemif_configs[] = { .turn_around = 3, .width = AEMIF_WIDTH_8, }, - -}; - -static struct pll_init_data pll_config[] = { - CORE_PLL_1228, - PASS_PLL_983, - TETRIS_PLL_1200, }; int dram_init(void) { - init_ddr3(); + ddr3_init(); gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_MAX_RAM_BANK_SIZE); @@ -71,42 +41,18 @@ int dram_init(void) return 0; } -#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET -struct eth_priv_t eth_priv_cfg[] = { - { - .int_name = "K2HK_EMAC", - .rx_flow = 22, - .phy_addr = 0, - .slave_port = 1, - .sgmii_link_type = SGMII_LINK_MAC_PHY, - }, - { - .int_name = "K2HK_EMAC1", - .rx_flow = 23, - .phy_addr = 1, - .slave_port = 2, - .sgmii_link_type = SGMII_LINK_MAC_PHY, - }, - { - .int_name = "K2HK_EMAC2", - .rx_flow = 24, - .phy_addr = 2, - .slave_port = 3, - .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, - }, - { - .int_name = "K2HK_EMAC3", - .rx_flow = 25, - .phy_addr = 3, - .slave_port = 4, - .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, - }, -}; +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_LINUX_BOOT_PARAM_ADDR; + + return 0; +} +#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET int get_eth_env_param(char *env_name) { char *env; - int res = -1; + int res = -1; env = getenv(env_name); if (env) @@ -117,12 +63,14 @@ int get_eth_env_param(char *env_name) int board_eth_init(bd_t *bis) { - int j; - int res; - char link_type_name[32]; + int j; + int res; + int port_num; + char link_type_name[32]; - for (j = 0; j < (sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t)); - j++) { + port_num = get_num_eth_ports(); + + for (j = 0; j < port_num; j++) { sprintf(link_type_name, "sgmii%d_link_type", j); res = get_eth_env_param(link_type_name); if (res >= 0) @@ -135,46 +83,24 @@ int board_eth_init(bd_t *bis) } #endif -/* Byte swap the 32-bit data if the device is BE */ -int cpu_to_bus(u32 *ptr, u32 length) -{ - u32 i; - - if (device_big_endian) - for (i = 0; i < length; i++, ptr++) - *ptr = __swab32(*ptr); - - return 0; -} - -#if defined(CONFIG_BOARD_EARLY_INIT_F) -int board_early_init_f(void) -{ - init_plls(ARRAY_SIZE(pll_config), pll_config); - return 0; -} -#endif - -int board_init(void) -{ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -#define K2_DDR3_START_ADDR 0x80000000 void ft_board_setup(void *blob, bd_t *bd) { - u64 start[2]; + int lpae; + char *env; + char *endp; + int nbanks; u64 size[2]; - char name[32], *env, *endp; - int lpae, nodeoffset; + u64 start[2]; + char name[32]; + int nodeoffset; u32 ddr3a_size; - int nbanks; + int unitrd_fixup = 0; env = getenv("mem_lpae"); lpae = env && simple_strtol(env, NULL, 0); + env = getenv("uinitrd_fixup"); + unitrd_fixup = env && simple_strtol(env, NULL, 0); ddr3a_size = 0; if (lpae) { @@ -191,7 +117,7 @@ void ft_board_setup(void *blob, bd_t *bd) /* adjust memory start address for LPAE */ if (lpae) { - start[0] -= K2_DDR3_START_ADDR; + start[0] -= CONFIG_SYS_SDRAM_BASE; start[0] += CONFIG_SYS_LPAE_SDRAM_BASE; } @@ -217,10 +143,11 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory_banks(blob, start, size, nbanks); /* Fix up the initrd */ - if (lpae) { - u64 initrd_start, initrd_end; - u32 *prop1, *prop2; + if (lpae && unitrd_fixup) { int err; + u32 *prop1, *prop2; + u64 initrd_start, initrd_end; + nodeoffset = fdt_path_offset(blob, "/chosen"); if (nodeoffset >= 0) { prop1 = (u32 *)fdt_getprop(blob, nodeoffset, @@ -229,11 +156,11 @@ void ft_board_setup(void *blob, bd_t *bd) "linux,initrd-end", NULL); if (prop1 && prop2) { initrd_start = __be32_to_cpu(*prop1); - initrd_start -= K2_DDR3_START_ADDR; + initrd_start -= CONFIG_SYS_SDRAM_BASE; initrd_start += CONFIG_SYS_LPAE_SDRAM_BASE; initrd_start = __cpu_to_be64(initrd_start); initrd_end = __be32_to_cpu(*prop2); - initrd_end -= K2_DDR3_START_ADDR; + initrd_end -= CONFIG_SYS_SDRAM_BASE; initrd_end += CONFIG_SYS_LPAE_SDRAM_BASE; initrd_end = __cpu_to_be64(initrd_end); @@ -267,9 +194,10 @@ void ft_board_setup(void *blob, bd_t *bd) void ft_board_setup_ex(void *blob, bd_t *bd) { - int lpae; - char *env; - u64 *reserve_start, size; + int lpae; + u64 size; + char *env; + u64 *reserve_start; env = getenv("mem_lpae"); lpae = env && simple_strtol(env, NULL, 0); @@ -286,7 +214,7 @@ void ft_board_setup_ex(void *blob, bd_t *bd) *reserve_start = __cpu_to_be64(*reserve_start); size = __cpu_to_be64(*(reserve_start + 1)); if (size) { - *reserve_start -= K2_DDR3_START_ADDR; + *reserve_start -= CONFIG_SYS_SDRAM_BASE; *reserve_start += CONFIG_SYS_LPAE_SDRAM_BASE; *reserve_start = diff --git a/board/ti/ks2_evm/board.h b/board/ti/ks2_evm/board.h new file mode 100644 index 00000000000..d91ef736129 --- /dev/null +++ b/board/ti/ks2_evm/board.h @@ -0,0 +1,19 @@ +/* + * K2HK EVM : Board common header + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _KS2_BOARD +#define _KS2_BOARD + +#include <asm/arch/emac_defs.h> + +extern struct eth_priv_t eth_priv_cfg[]; + +int get_num_eth_ports(void); + +#endif diff --git a/board/ti/ks2_evm/board_k2e.c b/board/ti/ks2_evm/board_k2e.c new file mode 100644 index 00000000000..d2499b7244d --- /dev/null +++ b/board/ti/ks2_evm/board_k2e.c @@ -0,0 +1,39 @@ +/* + * K2E EVM : Board initialization + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/ddr3.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +unsigned int external_clk[ext_clk_count] = { + [sys_clk] = 100000000, + [alt_core_clk] = 100000000, + [pa_clk] = 100000000, + [ddr3_clk] = 100000000, + [mcm_clk] = 312500000, + [pcie_clk] = 100000000, + [sgmii_clk] = 156250000, + [xgmii_clk] = 156250000, + [usb_clk] = 100000000, +}; + +static struct pll_init_data pll_config[] = { + CORE_PLL_1200, + PASS_PLL_1000, +}; + +#if defined(CONFIG_BOARD_EARLY_INIT_F) +int board_early_init_f(void) +{ + init_plls(ARRAY_SIZE(pll_config), pll_config); + return 0; +} +#endif diff --git a/board/ti/ks2_evm/board_k2hk.c b/board/ti/ks2_evm/board_k2hk.c new file mode 100644 index 00000000000..a369d6bd63d --- /dev/null +++ b/board/ti/ks2_evm/board_k2hk.c @@ -0,0 +1,81 @@ +/* + * K2HK EVM : Board initialization + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/emac_defs.h> + +DECLARE_GLOBAL_DATA_PTR; + +unsigned int external_clk[ext_clk_count] = { + [sys_clk] = 122880000, + [alt_core_clk] = 125000000, + [pa_clk] = 122880000, + [tetris_clk] = 125000000, + [ddr3a_clk] = 100000000, + [ddr3b_clk] = 100000000, + [mcm_clk] = 312500000, + [pcie_clk] = 100000000, + [sgmii_srio_clk] = 156250000, + [xgmii_clk] = 156250000, + [usb_clk] = 100000000, + [rp1_clk] = 123456789 +}; + +static struct pll_init_data pll_config[] = { + CORE_PLL_1228, + PASS_PLL_983, + TETRIS_PLL_1200, +}; + +#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET +struct eth_priv_t eth_priv_cfg[] = { + { + .int_name = "K2HK_EMAC", + .rx_flow = 22, + .phy_addr = 0, + .slave_port = 1, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2HK_EMAC1", + .rx_flow = 23, + .phy_addr = 1, + .slave_port = 2, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2HK_EMAC2", + .rx_flow = 24, + .phy_addr = 2, + .slave_port = 3, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, + { + .int_name = "K2HK_EMAC3", + .rx_flow = 25, + .phy_addr = 3, + .slave_port = 4, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, +}; + +int get_num_eth_ports(void) +{ + return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t); +} +#endif + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ + init_plls(ARRAY_SIZE(pll_config), pll_config); + return 0; +} +#endif diff --git a/board/ti/ks2_evm/ddr3_cfg.c b/board/ti/ks2_evm/ddr3_cfg.c new file mode 100644 index 00000000000..f7da9f2bcba --- /dev/null +++ b/board/ti/ks2_evm/ddr3_cfg.c @@ -0,0 +1,170 @@ +/* + * Keystone2: DDR3 configuration + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +#include <i2c.h> +#include <asm/arch/ddr3.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* DDR3 PHY configuration data with 1600M rate, 8GB size */ +struct ddr3_phy_config ddr3phy_1600_8g = { + .pllcr = 0x0001C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0D861A80ul, + .ptr4 = 0x0C827100ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), + .dcr_val = ((1 << 10)), + .dtpr0 = 0xA19DBB66ul, + .dtpr1 = 0x32868300ul, + .dtpr2 = 0x50035200ul, + .mr0 = 0x00001C70ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000018ul, + .dtcr = 0x730035C7ul, + .pgcr2 = 0x00F07A12ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +/* DDR3 EMIF configuration data with 1600M rate, 8GB size */ +struct ddr3_emif_config ddr3_1600_8g = { + .sdcfg = 0x6200CE6Aul, + .sdtim1 = 0x16709C55ul, + .sdtim2 = 0x00001D4Aul, + .sdtim3 = 0x435DFF54ul, + .sdtim4 = 0x553F0CFFul, + .zqcfg = 0xF0073200ul, + .sdrfc = 0x00001869ul, +}; + +#ifdef CONFIG_K2HK_EVM +/* DDR3 PHY configuration data with 1333M rate, and 2GB size */ +struct ddr3_phy_config ddr3phy_1333_2g = { + .pllcr = 0x0005C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0B4515C2ul, + .ptr4 = 0x0A6E08B4ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), + .dcr_val = ((1 << 10)), + .dtpr0 = 0x8558AA55ul, + .dtpr1 = 0x32857280ul, + .dtpr2 = 0x5002C200ul, + .mr0 = 0x00001A60ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000010ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F065B8ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +/* DDR3 EMIF configuration data with 1333M rate, and 2GB size */ +struct ddr3_emif_config ddr3_1333_2g = { + .sdcfg = 0x62008C62ul, + .sdtim1 = 0x125C8044ul, + .sdtim2 = 0x00001D29ul, + .sdtim3 = 0x32CDFF43ul, + .sdtim4 = 0x543F0ADFul, + .zqcfg = 0x70073200ul, + .sdrfc = 0x00001457ul, +}; +#endif + +#ifdef CONFIG_K2E_EVM +/* DDR3 PHY configuration data with 1600M rate, and 4GB size */ +struct ddr3_phy_config ddr3phy_1600_4g = { + .pllcr = 0x0001C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x08861A80ul, + .ptr4 = 0x0C827100ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), + .dcr_val = ((1 << 10)), + .dtpr0 = 0x9D9CBB66ul, + .dtpr1 = 0x12840300ul, + .dtpr2 = 0x5002D200ul, + .mr0 = 0x00001C70ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000018ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F07A12ul, + .zq0cr1 = 0x0001005Dul, + .zq1cr1 = 0x0001005Bul, + .zq2cr1 = 0x0001005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +/* DDR3 EMIF configuration data with 1600M rate, and 4GB size */ +struct ddr3_emif_config ddr3_1600_4g = { + .sdcfg = 0x6200CE62ul, + .sdtim1 = 0x166C9855ul, + .sdtim2 = 0x00001D4Aul, + .sdtim3 = 0x421DFF53ul, + .sdtim4 = 0x543F07FFul, + .zqcfg = 0x70073200ul, + .sdrfc = 0x00001869ul, +}; +#endif + +int ddr3_get_dimm_params(char *dimm_name) +{ + int ret; + int old_bus; + u8 spd_params[256]; + + i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); + + old_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + ret = i2c_read(0x53, 0, 1, spd_params, 256); + + i2c_set_bus_num(old_bus); + + dimm_name[0] = '\0'; + + if (ret) { + puts("Cannot read DIMM params\n"); + return 1; + } + + /* + * We need to convert spd data to dimm parameters + * and to DDR3 EMIF and PHY regirsters values. + * For now we just return DIMM type string value. + * Caller may use this value to choose appropriate + * a pre-set DDR3 configuration + */ + + strncpy(dimm_name, (char *)&spd_params[0x80], 18); + dimm_name[18] = '\0'; + + return 0; +} diff --git a/board/ti/ks2_evm/ddr3_cfg.h b/board/ti/ks2_evm/ddr3_cfg.h new file mode 100644 index 00000000000..15fcf52ef19 --- /dev/null +++ b/board/ti/ks2_evm/ddr3_cfg.h @@ -0,0 +1,24 @@ +/* + * Keystone2: DDR3 configuration + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR3_CFG_H +#define __DDR3_CFG_H + +extern struct ddr3_phy_config ddr3phy_1600_8g; +extern struct ddr3_emif_config ddr3_1600_8g; + +extern struct ddr3_phy_config ddr3phy_1333_2g; +extern struct ddr3_emif_config ddr3_1333_2g; + +extern struct ddr3_phy_config ddr3phy_1600_4g; +extern struct ddr3_emif_config ddr3_1600_4g; + +int ddr3_get_dimm_params(char *dimm_name); + +#endif /* __DDR3_CFG_H */ diff --git a/board/ti/ks2_evm/ddr3_k2e.c b/board/ti/ks2_evm/ddr3_k2e.c new file mode 100644 index 00000000000..40fd96607db --- /dev/null +++ b/board/ti/ks2_evm/ddr3_k2e.c @@ -0,0 +1,55 @@ +/* + * Keystone2: DDR3 initialization + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include "ddr3_cfg.h" +#include <asm/arch/ddr3.h> + +static int ddr3_size; +static struct pll_init_data ddr3_400 = DDR3_PLL_400; + +void ddr3_init(void) +{ + char dimm_name[32]; + + if (~(readl(KS2_PLL_CNTRL_BASE + KS2_RSTCTRL_RSTYPE) & 0x1)) + init_pll(&ddr3_400); + + ddr3_get_dimm_params(dimm_name); + + printf("Detected SO-DIMM [%s]\n", dimm_name); + + /* Reset DDR3 PHY after PLL enabled */ + ddr3_reset_ddrphy(); + + if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { + /* 8G SO-DIMM */ + ddr3_size = 8; + printf("DRAM: 8 GiB\n"); + ddr3phy_1600_8g.zq0cr1 |= 0x10000; + ddr3phy_1600_8g.zq1cr1 |= 0x10000; + ddr3phy_1600_8g.zq2cr1 |= 0x10000; + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g); + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_8g); + } else if (!strcmp(dimm_name, "18KSF51272HZ-1G6K2")) { + /* 4G SO-DIMM */ + ddr3_size = 4; + printf("DRAM: 4 GiB\n"); + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_4g); + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_4g); + } +} + +/** + * ddr3_get_size - return ddr3 size in GiB + */ +int ddr3_get_size(void) +{ + return ddr3_size; +} diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c new file mode 100644 index 00000000000..21a5a0a252e --- /dev/null +++ b/board/ti/ks2_evm/ddr3_k2hk.c @@ -0,0 +1,84 @@ +/* + * Keystone2: DDR3 initialization + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include "ddr3_cfg.h" +#include <asm/arch/ddr3.h> +#include <asm/arch/hardware.h> + +struct pll_init_data ddr3a_333 = DDR3_PLL_333(A); +struct pll_init_data ddr3a_400 = DDR3_PLL_400(A); + +void ddr3_init(void) +{ + char dimm_name[32]; + + ddr3_get_dimm_params(dimm_name); + + printf("Detected SO-DIMM [%s]\n", dimm_name); + + if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { + init_pll(&ddr3a_400); + if (cpu_revision() > 0) { + if (cpu_revision() > 1) { + /* PG 2.0 */ + /* Reset DDR3A PHY after PLL enabled */ + ddr3_reset_ddrphy(); + ddr3phy_1600_8g.zq0cr1 |= 0x10000; + ddr3phy_1600_8g.zq1cr1 |= 0x10000; + ddr3phy_1600_8g.zq2cr1 |= 0x10000; + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, + &ddr3phy_1600_8g); + } else { + /* PG 1.1 */ + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, + &ddr3phy_1600_8g); + } + + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, + &ddr3_1600_8g); + printf("DRAM: Capacity 8 GiB (includes reported below)\n"); + } else { + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g); + ddr3_1600_8g.sdcfg |= 0x1000; + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, + &ddr3_1600_8g); + printf("DRAM: Capacity 4 GiB (includes reported below)\n"); + } + } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { + init_pll(&ddr3a_333); + if (cpu_revision() > 0) { + if (cpu_revision() > 1) { + /* PG 2.0 */ + /* Reset DDR3A PHY after PLL enabled */ + ddr3_reset_ddrphy(); + ddr3phy_1333_2g.zq0cr1 |= 0x10000; + ddr3phy_1333_2g.zq1cr1 |= 0x10000; + ddr3phy_1333_2g.zq2cr1 |= 0x10000; + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, + &ddr3phy_1333_2g); + } else { + /* PG 1.1 */ + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, + &ddr3phy_1333_2g); + } + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, + &ddr3_1333_2g); + } else { + ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g); + ddr3_1333_2g.sdcfg |= 0x1000; + ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, + &ddr3_1333_2g); + } + } else { + printf("Unknown SO-DIMM. Cannot configure DDR3\n"); + while (1) + ; + } +} diff --git a/boards.cfg b/boards.cfg index 4ab43475a48..c0afa80cc07 100644 --- a/boards.cfg +++ b/boards.cfg @@ -300,7 +300,8 @@ Active arm armv7 exynos samsung trats Active arm armv7 exynos samsung trats2 trats2 - Piotr Wilczek <p.wilczek@samsung.com> Active arm armv7 exynos samsung universal_c210 s5pc210_universal - Przemyslaw Marczak <p.marczak@samsung.com> Active arm armv7 highbank - highbank highbank - Rob Herring <robh@kernel.org> -Active arm armv7 keystone ti k2hk_evm k2hk_evm - Vitaly Andrianov <vitalya@ti.com> +Active arm armv7 keystone ti ks2_evm k2hk_evm - Vitaly Andrianov <vitalya@ti.com> +Active arm armv7 keystone ti ks2_evm k2e_evm - Vitaly Andrianov <vitalya@ti.com> Active arm armv7 mx5 denx m53evk m53evk m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg Marek Vasut <marek.vasut@gmail.com> Active arm armv7 mx5 esg ima3-mx53 ima3-mx53 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg - Active arm armv7 mx5 freescale mx51evk mx51evk mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg Stefano Babic <sbabic@denx.de> diff --git a/common/image-fdt.c b/common/image-fdt.c index 9fc7481fd80..7795b80ccf8 100644 --- a/common/image-fdt.c +++ b/common/image-fdt.c @@ -492,7 +492,7 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, if (!ft_verify_fdt(blob)) return -1; -#ifdef CONFIG_SOC_K2HK +#if defined(CONFIG_SOC_KEYSTONE) if (IMAGE_OF_BOARD_SETUP) ft_board_setup_ex(blob, gd->bd); #endif diff --git a/doc/README.nand b/doc/README.nand index 70cf768d237..e29188f1ec0 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -89,6 +89,10 @@ Commands: Configuration Options: + CONFIG_SYS_NAND_U_BOOT_OFFS + NAND Offset from where SPL will read u-boot image. This is the starting + address of u-boot MTD partition in NAND. + CONFIG_CMD_NAND Enables NAND support and commmands. @@ -226,6 +230,14 @@ Platform specific options detection. However ECC calculation on such plaforms would still be done by GPMC controller. + CONFIG_SPL_NAND_AM33XX_BCH + Enables SPL-NAND driver (am335x_spl_bch.c) which supports ELM based + hardware ECC correction. This is useful for platforms which have ELM + hardware engine and use NAND boot mode. + Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine, + so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling + SPL-NAND driver with software ECC correction support. + CONFIG_NAND_OMAP_ECCSCHEME On OMAP platforms, this CONFIG specifies NAND ECC scheme. It can take following values: diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 5d425092f43..a079b1e5cff 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -305,6 +305,189 @@ static struct nand_ecclayout nand_davinci_4bit_layout_oobfirst = { #endif }; +#if defined CONFIG_KEYSTONE_RBL_NAND +#if defined(CONFIG_SYS_NAND_PAGE_2K) +static struct nand_ecclayout nand_keystone_rbl_4bit_layout_oobfirst = { + .eccbytes = 40, + .eccpos = { + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + }, + .oobfree = { + {.offset = 2, .length = 4, }, + {.offset = 16, .length = 6, }, + {.offset = 32, .length = 6, }, + {.offset = 48, .length = 6, }, + }, +#elif defined(CONFIG_SYS_NAND_PAGE_4K) + .eccbytes = 80, + .eccpos = { + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, + 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, + }, + .oobfree = { + {.offset = 2, .length = 4, }, + {.offset = 16, .length = 6, }, + {.offset = 32, .length = 6, }, + {.offset = 48, .length = 6, }, + {.offset = 64, .length = 6, }, + {.offset = 80, .length = 6, }, + {.offset = 96, .length = 6, }, + {.offset = 112, .length = 6, }, + }, +#endif +}; + +#ifdef CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE >> 11 +#elif defined(CONFIG_SYS_NAND_PAGE_4K) +#define CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE >> 12 +#endif + +/** + * nand_davinci_write_page - write one page + * @mtd: MTD device structure + * @chip: NAND chip descriptor + * @buf: the data to write + * @oob_required: must write chip->oob_poi to OOB + * @page: page number to write + * @cached: cached programming + * @raw: use _raw version of write_page + */ +static int nand_davinci_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, + int page, int cached, int raw) +{ + int status; + int ret = 0; + struct nand_ecclayout *saved_ecc_layout; + + /* save current ECC layout and assign Keystone RBL ECC layout */ + if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) { + saved_ecc_layout = chip->ecc.layout; + chip->ecc.layout = &nand_keystone_rbl_4bit_layout_oobfirst; + mtd->oobavail = chip->ecc.layout->oobavail; + } + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); + + if (unlikely(raw)) + status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required); + else + status = chip->ecc.write_page(mtd, chip, buf, oob_required); + + if (status < 0) { + ret = status; + goto err; + } + + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip); + + /* + * See if operation failed and additional status checks are + * available. + */ + if ((status & NAND_STATUS_FAIL) && (chip->errstat)) + status = chip->errstat(mtd, chip, FL_WRITING, status, page); + + if (status & NAND_STATUS_FAIL) { + ret = -EIO; + goto err; + } + +#ifdef CONFIG_MTD_NAND_VERIFY_WRITE + /* Send command to read back the data */ + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + if (chip->verify_buf(mtd, buf, mtd->writesize)) { + ret = -EIO; + goto err; + } + + /* Make sure the next page prog is preceded by a status read */ + chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); +#endif +err: + /* restore ECC layout */ + if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) { + chip->ecc.layout = saved_ecc_layout; + mtd->oobavail = saved_ecc_layout->oobavail; + } + + return ret; +} + +/** + * nand_davinci_read_page_hwecc - hardware ECC based page read function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi + * @page: page number to read + * + * Not for syndrome calculating ECC controllers which need a special oob layout. + */ +static int nand_davinci_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint32_t *eccpos; + uint8_t *p = buf; + uint8_t *ecc_code = chip->buffers->ecccode; + uint8_t *ecc_calc = chip->buffers->ecccalc; + struct nand_ecclayout *saved_ecc_layout = chip->ecc.layout; + + /* save current ECC layout and assign Keystone RBL ECC layout */ + if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) { + chip->ecc.layout = &nand_keystone_rbl_4bit_layout_oobfirst; + mtd->oobavail = chip->ecc.layout->oobavail; + } + + eccpos = chip->ecc.layout->eccpos; + + /* Read the OOB area first */ + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + chip->ecc.hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + + stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + + /* restore ECC layout */ + if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) { + chip->ecc.layout = saved_ecc_layout; + mtd->oobavail = saved_ecc_layout->oobavail; + } + + return 0; +} +#endif /* CONFIG_KEYSTONE_RBL_NAND */ + static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode) { u32 val; @@ -604,6 +787,19 @@ static void nand_flash_init(void) void davinci_nand_init(struct nand_chip *nand) { +#if defined CONFIG_KEYSTONE_RBL_NAND + int i; + struct nand_ecclayout *layout; + + layout = &nand_keystone_rbl_4bit_layout_oobfirst; + layout->oobavail = 0; + for (i = 0; layout->oobfree[i].length && + i < ARRAY_SIZE(layout->oobfree); i++) + layout->oobavail += layout->oobfree[i].length; + + nand->write_page = nand_davinci_write_page; + nand->ecc.read_page = nand_davinci_read_page_hwecc; +#endif nand->chip_delay = 0; #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT nand->bbt_options |= NAND_BBT_USE_FLASH; diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index bd5fba21cee..8ec5161ec61 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -211,6 +211,8 @@ struct cpdma_chan { #define chan_read(chan, fld) __raw_readl((chan)->fld) #define chan_read_ptr(chan, fld) ((void *)__raw_readl((chan)->fld)) +#define for_active_slave(slave, priv) \ + slave = (priv)->slaves + (priv)->data.active_slave; if (slave) #define for_each_slave(slave, priv) \ for (slave = (priv)->slaves; slave != (priv)->slaves + \ (priv)->data.slaves; slave++) @@ -609,7 +611,7 @@ static int cpsw_update_link(struct cpsw_priv *priv) int link = 0; struct cpsw_slave *slave; - for_each_slave(slave, priv) + for_active_slave(slave, priv) cpsw_slave_update_link(slave, priv, &link); priv->mdio_link = readl(&mdio_regs->link); return link; @@ -785,7 +787,7 @@ static int cpsw_init(struct eth_device *dev, bd_t *bis) ALE_SECURE); cpsw_ale_add_mcast(priv, NetBcastAddr, 1 << priv->host_port); - for_each_slave(slave, priv) + for_active_slave(slave, priv) cpsw_slave_init(slave, priv); cpsw_update_link(priv); @@ -1013,7 +1015,7 @@ int cpsw_register(struct cpsw_platform_data *data) cpsw_mdio_init(dev->name, data->mdio_base, data->mdio_div); priv->bus = miiphy_get_dev_by_name(dev->name); - for_each_slave(slave, priv) + for_active_slave(slave, priv) cpsw_phy_init(dev, slave); return 1; diff --git a/drivers/power/pmic/pmic_tps65218.c b/drivers/power/pmic/pmic_tps65218.c index 09524563799..dbc7a73a723 100644 --- a/drivers/power/pmic/pmic_tps65218.c +++ b/drivers/power/pmic/pmic_tps65218.c @@ -7,6 +7,8 @@ #include <common.h> #include <i2c.h> +#include <asm/errno.h> +#include <power/pmic.h> #include <power/tps65218.h> /** @@ -95,3 +97,23 @@ int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel) return 0; } + +int power_tps65218_init(unsigned char bus) +{ + static const char name[] = "TPS65218_PMIC"; + struct pmic *p = pmic_alloc(); + + if (!p) { + printf("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } + + p->name = name; + p->interface = PMIC_I2C; + p->number_of_regs = TPS65218_PMIC_NUM_OF_REGS; + p->hw.i2c.addr = TPS65218_CHIP_PM; + p->hw.i2c.tx_num = 1; + p->bus = bus; + + return 0; +} diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index f26979dbe15..8e7052dda72 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -30,7 +30,7 @@ #define serial_in(y) readb(y) #endif -#if defined(CONFIG_K2HK_EVM) +#if defined(CONFIG_SOC_KEYSTONE) #define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 #define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0)) #undef UART_MCRVAL @@ -88,7 +88,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) /* /16 is proper to hit 115200 with 48MHz */ serial_out(0, &com_port->mdr1); #endif /* CONFIG_OMAP */ -#if defined(CONFIG_K2HK_EVM) +#if defined(CONFIG_SOC_KEYSTONE) serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC); #endif } diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 34d27c632a9..35ae0e6fb76 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -254,6 +254,11 @@ #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif #endif @@ -453,6 +458,7 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_SIZE 0x01000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Reduce SPL size by removing unlikey targets */ #ifdef CONFIG_NOR_BOOT diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index ad4cbd88b89..d826214efe0 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -252,17 +252,12 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ /* on one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 0102ff5b7f9..a9c5a8f3af3 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -259,18 +259,13 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ /* on one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 974ce986e9c..e26204025f8 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -33,6 +33,8 @@ #define CONFIG_SYS_I2C_MULTI_EEPROMS /* Power */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C #define CONFIG_POWER_TPS65218 /* SPL defines. */ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 4d1dd28a915..a3e6452ec1d 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -150,6 +150,11 @@ #define CONFIG_ENV_OFFSET 0x300000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_NAND_ONFI_DETECTION +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x400000 /* un-assigned: (using dtb) */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x500000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif /* GPIO pin + bank to pin ID mapping */ #define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin) diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 5c484ef0788..d8d71a94ee9 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -258,9 +258,6 @@ */ /* **** PISMO SUPPORT *** */ -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 5308790fe6b..cc53fc9cd78 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -262,8 +262,6 @@ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* NAND and environment organization */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_ENV_IS_IN_NAND 1 diff --git a/include/configs/dig297.h b/include/configs/dig297.h index ce205e9b3eb..7e47c564530 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -251,10 +251,6 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_SYS_FLASH_BASE boot_flash_base diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h new file mode 100644 index 00000000000..3502d104720 --- /dev/null +++ b/include/configs/k2e_evm.h @@ -0,0 +1,37 @@ +/* + * Configuration header file for TI's k2e-evm + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_K2E_EVM_H +#define __CONFIG_K2E_EVM_H + +/* Platform type */ +#define CONFIG_SOC_K2E +#define CONFIG_K2E_EVM + +/* U-Boot general configuration */ +#define CONFIG_SYS_PROMPT "K2E EVM # " + +#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" + +#define KS2_FDT_NAME "name_fdt=k2e-evm.dtb\0" +#define KS2_ADDR_MON "addr_mon=0x0c140000\0" +#define KS2_NAME_MON "name_mon=skern-k2e-evm.bin\0" +#define NAME_UBOOT "name_uboot=u-boot-spi-k2e-evm.gph\0" +#define NAME_UBI "name_ubi=k2e-evm-ubifs.ubi\0" + +#include <configs/ks2_evm.h> + +/* SPL SPI Loader Configuration */ +#define CONFIG_SPL_TEXT_BASE 0x0c100000 + +/* NAND Configuration */ +#define CONFIG_SYS_NAND_PAGE_2K + +#endif /* __CONFIG_K2E_EVM_H */ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 858329f9586..8aa616da0e0 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -14,252 +14,27 @@ #define CONFIG_SOC_K2HK #define CONFIG_K2HK_EVM -/* U-Boot Build Configuration */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SYS_THUMB_BUILD - -/* SoC Configuration */ -#define CONFIG_ARMV7 -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_ARCH_TIMER -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_TEXT_BASE 0x0c001000 -#define CONFIG_SPL_TARGET "u-boot-spi.gph" -#define CONFIG_SYS_DCACHE_OFF - -/* Memory Configuration */ -#define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 -#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ -#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \ - GENERATED_GBL_DATA_SIZE) - -/* SPL SPI Loader Configuration */ -#define CONFIG_SPL_TEXT_BASE 0x0c200000 -#define CONFIG_SPL_PAD_TO 65536 -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8) -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \ - CONFIG_SPL_MAX_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024) -#define CONFIG_SPL_STACK_SIZE (8 * 1024) -#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \ - CONFIG_SYS_SPL_MALLOC_SIZE + \ - CONFIG_SPL_STACK_SIZE - 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO -#define CONFIG_SPL_FRAMEWORK - -/* UART Configuration */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_MEM32 -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE -#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE -#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6) -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* SPI Configuration */ -#define CONFIG_SPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_DAVINCI_SPI -#define CONFIG_SYS_SPI0 -#define CONFIG_SYS_SPI_BASE K2HK_SPI_BASE -#define CONFIG_SYS_SPI0_NUM_CS 4 -#define CONFIG_SYS_SPI1 -#define CONFIG_SYS_SPI1_BASE K2HK_SPI1_BASE -#define CONFIG_SYS_SPI1_NUM_CS 4 -#define CONFIG_SYS_SPI2 -#define CONFIG_SYS_SPI2_NUM_CS 4 -#define CONFIG_SYS_SPI2_BASE K2HK_SPI2_BASE -#define CONFIG_CMD_SPI -#define CONFIG_SYS_SPI_CLK clk_get_rate(K2HK_LPSC_EMIF25_SPI) -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +/* U-Boot general configuration */ +#define CONFIG_SYS_PROMPT "K2HK EVM # " -/* I2C Configuration */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */ -#define I2C_BUS_MAX 3 +#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" -/* EEPROM definitions */ -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define KS2_FDT_NAME "name_fdt=k2hk-evm.dtb\0" +#define KS2_ADDR_MON "addr_mon=0x0c5f0000\0" +#define KS2_NAME_MON "name_mon=skern-k2hk-evm.bin\0" +#define NAME_UBOOT "name_uboot=u-boot-spi-k2hk-evm.gph\0" +#define NAME_UBI "name_ubi=k2hk-evm-ubifs.ubi\0" -/* Network Configuration */ -#define CONFIG_DRIVER_TI_KEYSTONE_NET -#define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 32 -#define CONFIG_NET_MULTI -#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5 -#define CONFIG_SYS_SGMII_REFCLK_MHZ 312 -#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250 -#define CONFIG_SYS_SGMII_RATESCALE 2 +#include <configs/ks2_evm.h> -/* AEMIF */ -#define CONFIG_TI_AEMIF -#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE +/* SPL SPI Loader Configuration */ +#define CONFIG_SPL_TEXT_BASE 0x0c200000 /* NAND Configuration */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_CMD_NAND_ECCLAYOUT -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_MASK_CLE 0x4000 -#define CONFIG_SYS_NAND_MASK_ALE 0x2000 - -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 1 -#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x100000 -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_RBTREE -#define CONFIG_LZO -#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ - "1024k(bootloader)ro,512k(params)ro," \ - "-(ubifs)" -/* U-Boot command configuration */ -#include <config_cmd_default.h> -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_CMD_SF -#define CONFIG_CMD_EEPROM - -/* U-Boot general configuration */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SYS_PROMPT "K2HK EVM # " -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE 2048 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "boot=ramfs\0" \ - "tftp_root=/\0" \ - "nfs_root=/export\0" \ - "mem_lpae=1\0" \ - "mem_reserve=512M\0" \ - "addr_fdt=0x87000000\0" \ - "addr_kern=0x88000000\0" \ - "addr_mon=0x0c5f0000\0" \ - "addr_uboot=0x87000000\0" \ - "addr_fs=0x82000000\0" \ - "addr_ubi=0x82000000\0" \ - "fdt_high=0xffffffff\0" \ - "name_fdt=uImage-k2hk-evm.dtb\0" \ - "name_fs=arago-console-image.cpio.gz\0" \ - "name_kern=uImage-keystone-evm.bin\0" \ - "name_mon=skern-keystone-evm.bin\0" \ - "name_uboot=u-boot-spi-keystone-evm.gph\0" \ - "name_ubi=keystone-evm-ubifs.ubi\0" \ - "run_mon=mon_install ${addr_mon}\0" \ - "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ - "init_net=run args_all args_net\0" \ - "init_ubi=run args_all args_ubi; " \ - "ubi part ubifs; ubifsmount boot\0" \ - "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ - "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ - "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ - "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \ - "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ - "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \ - "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \ - "burn_uboot=sf probe; sf erase 0 0x100000; " \ - "sf write ${addr_uboot} 0 ${filesize}\0" \ - "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ - "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ - "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ - "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ - "${nfs_options} ip=dhcp\0" \ - "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \ - "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ - "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ - "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ - "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \ - "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \ - "burn_ubi=nand erase.part ubifs; " \ - "nand write ${addr_ubi} ubifs ${filesize}\0" \ - "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \ - "args_ramfs=setenv bootargs ${bootargs} earlyprintk " \ - "rdinit=/sbin/init rw root=/dev/ram0 " \ - "initrd=0x802000000,9M\0" \ - "no_post=1\0" \ - "mtdparts=mtdparts=davinci_nand.0:" \ - "1024k(bootloader)ro,512k(params)ro,522752k(ubifs)\0" -#define CONFIG_BOOTCOMMAND \ - "run init_${boot} get_fdt_${boot} get_mon_${boot} " \ - "get_kern_${boot} run_mon run_kern" -#define CONFIG_BOOTARGS \ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_SYS_BARGSIZE 1024 -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000) - -#define CONFIG_SUPPORT_RAW_INITRD - -/* we may include files below only after all above definitions */ -#include <asm/arch/hardware.h> -#include <asm/arch/clock.h> -#define CONFIG_SYS_HZ_CLOCK clk_get_rate(K2HK_CLK1_6) +/* Network */ +#define CONFIG_DRIVER_TI_KEYSTONE_NET #endif /* __CONFIG_K2HK_EVM_H */ diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h new file mode 100644 index 00000000000..43db581c75d --- /dev/null +++ b/include/configs/ks2_evm.h @@ -0,0 +1,275 @@ +/* + * Common configuration header file for all Keystone II EVM platforms + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_KS2_EVM_H +#define __CONFIG_KS2_EVM_H + +#define CONFIG_SOC_KEYSTONE + +/* U-Boot Build Configuration */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */ +#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_SYS_THUMB_BUILD + +/* SoC Configuration */ +#define CONFIG_ARMV7 +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_ARCH_TIMER +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_TEXT_BASE 0x0c001000 +#define CONFIG_SPL_TARGET "u-boot-spi.gph" +#define CONFIG_SYS_DCACHE_OFF + +/* Memory Configuration */ +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 +#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ +#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \ + GENERATED_GBL_DATA_SIZE) + +/* SPL SPI Loader Configuration */ +#define CONFIG_SPL_PAD_TO 65536 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8) +#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \ + CONFIG_SPL_MAX_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024) +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024) +#define CONFIG_SPL_STACK_SIZE (8 * 1024) +#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \ + CONFIG_SYS_SPL_MALLOC_SIZE + \ + CONFIG_SPL_STACK_SIZE - 4) +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CONFIG_SPL_FRAMEWORK + +/* UART Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_MEM32 +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE +#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE +#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6) +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* SPI Configuration */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DAVINCI_SPI +#define CONFIG_CMD_SPI +#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_CLK1_6) +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_SYS_SPI0 +#define CONFIG_SYS_SPI_BASE KS2_SPI0_BASE +#define CONFIG_SYS_SPI0_NUM_CS 4 +#define CONFIG_SYS_SPI1 +#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE +#define CONFIG_SYS_SPI1_NUM_CS 4 +#define CONFIG_SYS_SPI2 +#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE +#define CONFIG_SYS_SPI2_NUM_CS 4 + +/* Network Configuration */ +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 32 +#define CONFIG_NET_MULTI +#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5 +#define CONFIG_SYS_SGMII_REFCLK_MHZ 312 +#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250 +#define CONFIG_SYS_SGMII_RATESCALE 2 + +/* AEMIF */ +#define CONFIG_TI_AEMIF +#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE + +/* I2C Configuration */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ +#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */ +#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */ +#define I2C_BUS_MAX 3 + +/* EEPROM definitions */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CONFIG_ENV_EEPROM_IS_ON_I2C + +/* NAND Configuration */ +#define CONFIG_NAND_DAVINCI +#define CONFIG_KEYSTONE_RBL_NAND +#define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE CONFIG_ENV_OFFSET +#define CONFIG_SYS_NAND_MASK_CLE 0x4000 +#define CONFIG_SYS_NAND_MASK_ALE 0x2000 +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST + +#define CONFIG_SYS_NAND_LARGEPAGE +#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define MTDIDS_DEFAULT "nand0=davinci_nand.0" +#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ + "1024k(bootloader)ro,512k(params)ro," \ + "-(ubifs)" + +/* U-Boot command configuration */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_SF +#define CONFIG_CMD_EEPROM + +/* U-Boot general configuration */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE 2048 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE +#define CONFIG_TIMESTAMP + +/* EDMA3 */ +#define CONFIG_TI_EDMA3 + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "boot=ramfs\0" \ + "tftp_root=/\0" \ + "nfs_root=/export\0" \ + "mem_lpae=1\0" \ + "mem_reserve=512M\0" \ + "addr_fdt=0x87000000\0" \ + "addr_kern=0x88000000\0" \ + KS2_ADDR_MON \ + "addr_uboot=0x87000000\0" \ + "addr_fs=0x82000000\0" \ + "addr_ubi=0x82000000\0" \ + "addr_secdb_key=0xc000000\0" \ + "fdt_high=0xffffffff\0" \ + KS2_FDT_NAME \ + "name_fs=arago-console-image.cpio.gz\0" \ + "name_kern=uImage\0" \ + KS2_NAME_MON \ + NAME_UBOOT \ + NAME_UBI \ + "run_mon=mon_install ${addr_mon}\0" \ + "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ + "init_net=run args_all args_net\0" \ + "init_ubi=run args_all args_ubi; " \ + "ubi part ubifs; ubifsmount boot;" \ + "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \ + "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ + "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ + "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ + "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \ + "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ + "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \ + "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \ + "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \ + "sf write ${addr_uboot} 0 ${filesize}\0" \ + "burn_uboot_nand=nand erase 0 0x100000; " \ + "nand write ${addr_uboot} 0 ${filesize}\0" \ + "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ + KS2_ARGS_UBI \ + "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ + "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ + "${nfs_options} ip=dhcp\0" \ + "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \ + "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ + "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ + "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ + "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \ + "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \ + "burn_ubi=nand erase.part ubifs; " \ + "nand write ${addr_ubi} ubifs ${filesize}\0" \ + "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \ + "args_ramfs=setenv bootargs ${bootargs} " \ + "rdinit=/sbin/init rw root=/dev/ram0 " \ + "initrd=0x802000000,9M\0" \ + "no_post=1\0" \ + "mtdparts=mtdparts=davinci_nand.0:" \ + "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0" + +#define CONFIG_BOOTCOMMAND \ + "run init_${boot} get_fdt_${boot} get_mon_${boot} " \ + "get_kern_${boot} run_mon run_kern" + +#define CONFIG_BOOTARGS \ + +/* Linux interfacing */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_SYS_BARGSIZE 1024 +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000) +#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) + +#define CONFIG_SUPPORT_RAW_INITRD + +/* we may include files below only after all above definitions */ +#include <asm/arch/hardware.h> +#include <asm/arch/clock.h> +#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6) + +/* Maximum memory size for relocated U-boot at the end of the DDR3 memory + which is NOT applicable for DDR ECC test */ +#define CONFIG_MAX_UBOOT_MEM_SIZE (4 << 20) /* 4 MiB */ + +#endif /* __CONFIG_KS2_EVM_H */ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 47244c00343..75abb602cf9 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -316,10 +316,6 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_IS_IN_NAND #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 53cb3902f3f..43c1617a5ef 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -220,8 +220,6 @@ #ifdef ONENAND_SUPPORT -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 9ba031d4ba5..644e97f4c4f 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -266,13 +266,8 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ @@ -309,5 +304,11 @@ #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index ae4ce63f67f..739d392edc2 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -95,9 +95,6 @@ /* * PISMO support */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - /* Monitor at start of flash - Reserve 2 sectors */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -205,12 +202,12 @@ * NAND / OneNAND */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_FLASH_BASE ONENAND_MAP #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #endif diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 79daabd6bbf..006c9a9c0da 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -146,8 +146,6 @@ */ #ifdef CONFIG_BOOT_ONENAND -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M /* Configure the PISMO */ - #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ @@ -158,7 +156,6 @@ #endif #ifdef CONFIG_NAND -#define PISMO1_NAND_SIZE GPMC_SIZE_128M /* Configure the PISMO */ #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ @@ -199,6 +196,13 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif #endif /* __IGEP00X0_H */ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 8dcbba3c40d..717c935d2c4 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -277,16 +277,12 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_FLASH_BASE ONENAND_MAP #endif /* Monitor at start of flash */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index f7483a08278..e66f30655d6 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -173,12 +173,8 @@ 0x01F00000) /* 31MB */ /* FLASH and environment organization */ -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #if defined(CONFIG_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ @@ -220,5 +216,11 @@ #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index da67787e69e..c22c1fc6aaa 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -220,15 +220,10 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 3efe4cf8157..93f4d627a14 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -70,6 +70,12 @@ "4m(kernel),-(fs)" #if defined(CONFIG_CMD_NAND) +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ #endif @@ -165,13 +171,8 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 85104057a96..4684ad68522 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -159,6 +159,12 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* un-assigned */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif /* * USB configuration. We enable MUSB support, both for host and for diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 0c2f0f19c82..aa0ea162d25 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -181,10 +181,6 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_IS_IN_NAND diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 1b0fee9a808..9fc31bed6ad 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -22,6 +22,7 @@ #define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD #define MACH_TYPE_OMAP3_TAO3530 2836 @@ -253,13 +254,8 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 6e0bf090588..85c027c1d27 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -243,13 +243,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ -/* NAND */ -#ifdef CONFIG_NAND -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 -#endif - /* spl export command */ #define CONFIG_CMD_SPL #endif @@ -275,7 +268,6 @@ #define CONFIG_SPL_NAND_ECC #define CONFIG_SPL_MTD_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif #endif /* !CONFIG_NOR_BOOT */ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 80985a2655a..6c2f65305f0 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -35,6 +35,8 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> +#define CONFIG_SYS_GENERIC_BOARD + /* Display CPU and Board information */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -315,8 +317,6 @@ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* NAND and environment organization */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 diff --git a/include/cpsw.h b/include/cpsw.h index a73843d2f75..547b40c57bb 100644 --- a/include/cpsw.h +++ b/include/cpsw.h @@ -44,6 +44,7 @@ struct cpsw_platform_data { struct cpsw_slave_data *slave_data; void (*control)(int enabled); u32 host_port_num; + u32 active_slave; u8 version; }; diff --git a/include/power/pmic.h b/include/power/pmic.h index a62e6c90a5e..afbc5aab7e2 100644 --- a/include/power/pmic.h +++ b/include/power/pmic.h @@ -79,6 +79,7 @@ struct pmic { }; int pmic_init(unsigned char bus); +int power_init_board(void); int pmic_dialog_init(unsigned char bus); int check_reg(struct pmic *p, u32 reg); struct pmic *pmic_alloc(void); diff --git a/include/power/tps65218.h b/include/power/tps65218.h index 67aa2f8c8d4..f8f33b8b16b 100644 --- a/include/power/tps65218.h +++ b/include/power/tps65218.h @@ -60,4 +60,5 @@ enum { int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val, uchar mask); int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel); +int power_tps65218_init(unsigned char bus); #endif /* __POWER_TPS65218_H__ */ |