diff options
| -rw-r--r-- | arch/arm/mach-davinci/Kconfig | 7 | ||||
| -rw-r--r-- | board/Barix/ipam390/Kconfig | 12 | ||||
| -rw-r--r-- | board/Barix/ipam390/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/Barix/ipam390/Makefile | 8 | ||||
| -rw-r--r-- | board/Barix/ipam390/README.ipam390 | 229 | ||||
| -rw-r--r-- | board/Barix/ipam390/ipam390-ais-uart.cfg | 202 | ||||
| -rw-r--r-- | board/Barix/ipam390/ipam390.c | 335 | ||||
| -rw-r--r-- | board/Barix/ipam390/u-boot-spl-ipam390.lds | 57 | ||||
| -rw-r--r-- | configs/ipam390_defconfig | 45 | ||||
| -rw-r--r-- | include/configs/ipam390.h | 237 |
10 files changed, 0 insertions, 1138 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index c2a5759f455..61e84e51299 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,12 +4,6 @@ choice prompt "DaVinci board select" optional -config TARGET_IPAM390 - bool "IPAM390 board" - select MACH_DAVINCI_DA850_EVM - select SOC_DA850 - select SUPPORT_SPL - config TARGET_DA850EVM bool "DA850 EVM board" select MACH_DAVINCI_DA850_EVM @@ -136,7 +130,6 @@ config SYS_DA850_PLL1_PLLDIV3 endif -source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" source "board/lego/ev3/Kconfig" diff --git a/board/Barix/ipam390/Kconfig b/board/Barix/ipam390/Kconfig deleted file mode 100644 index b85d4da44b0..00000000000 --- a/board/Barix/ipam390/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_IPAM390 - -config SYS_BOARD - default "ipam390" - -config SYS_VENDOR - default "Barix" - -config SYS_CONFIG_NAME - default "ipam390" - -endif diff --git a/board/Barix/ipam390/MAINTAINERS b/board/Barix/ipam390/MAINTAINERS deleted file mode 100644 index 640e34fc8da..00000000000 --- a/board/Barix/ipam390/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -IPAM390 BOARD -M: Heiko Schocher <hs@denx.de> -S: Maintained -F: board/Barix/ipam390/ -F: include/configs/ipam390.h -F: configs/ipam390_defconfig diff --git a/board/Barix/ipam390/Makefile b/board/Barix/ipam390/Makefile deleted file mode 100644 index 735250a1e21..00000000000 --- a/board/Barix/ipam390/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - -obj-y += ipam390.o diff --git a/board/Barix/ipam390/README.ipam390 b/board/Barix/ipam390/README.ipam390 deleted file mode 100644 index be09280dd81..00000000000 --- a/board/Barix/ipam390/README.ipam390 +++ /dev/null @@ -1,229 +0,0 @@ -Summary -======= -The README is for the boot procedure on the ipam390 board - -In the context of U-Boot, the board is booted in three stages. The initial -bootloader which executes upon reset is the ROM Boot Loader (RBL) and sits -in the internal ROM. The RBL initializes the internal memory and then -depending on the exact board and pin configurations will initialize another -controller (such as NAND) to continue the boot process by loading -the secondary program loader (SPL). The SPL will initialize the system -further (some clocks, SDRAM). As on this board is used the falcon boot -mode, now 2 ways are possible depending on the GPIO 7_14 input pin, -connected with the "soft reset switch" - -If this pin is logical 1 (high level): -spl code starts the kernel image without delay - -If this pin is logical 0 (low level): -spl code starts the u-boot image - -AIS is an image format defined by TI for the images that are to be loaded -to memory by the RBL. The image is divided into a series of sections and -the image's entry point is specified. Each section comes with meta data -like the target address the section is to be copied to and the size of the -section, which is used by the RBL to load the image. At the end of the -image the RBL jumps to the image entry point. The AIS format allows for -other things such as programming the clocks and SDRAM if the header is -programmed for it. We do not take advantage of this and instead use SPL as -it allows for additional flexibility (run-time detect of board revision, -loading the next image from a different media, etc). - -Compilation -=========== -run "tools/buildman/buildman -k ipam390" in the u-boot source tree. -Once this build completes you will have a ../current/ipam390/u-boot.ais file -that needs to be written to the nand flash. - -Flashing the images to NAND -========================== -The AIS image can be written to NAND flash using the following commands. -Assuming that the network is configured and enabled and the u-boot.ais file -is tftp'able. - -U-Boot > print upd_uboot -upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;nand write c0000000 20000 ${filesize} -U-Boot > -U-Boot > run upd_uboot -Using DaVinci-EMAC device -TFTP from server 192.168.1.1; our IP address is 192.168.20.71 -Filename '/tftpboot/ipam390/u-boot.ais'. -Load address: 0xc0000000 -Loading: ################################## - 1.5 MiB/s -done -Bytes transferred = 493716 (78894 hex) - -NAND erase.part: device 0 offset 0x20000, size 0x160000 -Erasing at 0x160000 -- 100% complete. -OK - -NAND write: device 0 offset 0x20000, size 0x78894 - 493716 bytes written: OK -U-Boot > - -Recovery -======== - -In the case of a "bricked" board, you need to use the TI tools found -here[1] to create an uboot-uart-ais.bin file - -- cd to the u-boot source tree - -- compile the u-boot for the ipam390 board: -$ tools/buildman/buildman -k ipam390 - - -> Now we shall have u-boot.bin - -- Create u-boot-uart-ais.bin -$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini ipam390-ais-uart.cfg \ - -o ../current/ipam390/uboot-uart-ais.bin ./u-boot.bin@0xC1080000; - -Note: The ipam390-ais-uart.cfg is found in the board directory -for the ipam390 board, u-boot:/board/Barix/ipam390/ipam390-ais-uart.cfg - -- We can now run bootloader on IPAM390 via UART using the command below: - -$ mono ./slh_OMAP-L138.exe -waitForDevice -v -p /dev/tty.UC-232AC uboot-uart-ais.bin -NOTE: Do not cancel the command execution! The command takes 20+ seconds -to upload u-boot over serial and run it! -Outcome: -Waiting for the OMAP-L138... -(AIS Parse): Read magic word 0x41504954. -(AIS Parse): Waiting for BOOTME... (power on or reset target now) -(AIS Parse): BOOTME received! -(AIS Parse): Performing Start-Word Sync... -(AIS Parse): Performing Ping Opcode Sync... -(AIS Parse): Processing command 0: 0x5853590D. -(AIS Parse): Performing Opcode Sync... -(AIS Parse): Executing function... -(AIS Parse): Processing command 1: 0x5853590D. -(AIS Parse): Performing Opcode Sync... -(AIS Parse): Executing function... -(AIS Parse): Processing command 2: 0x5853590D. -(AIS Parse): Performing Opcode Sync... -(AIS Parse): Executing function... -(AIS Parse): Processing command 3: 0x5853590D. -(AIS Parse): Performing Opcode Sync... -(AIS Parse): Executing function... -(AIS Parse): Processing command 4: 0x5853590D. -(AIS Parse): Performing Opcode Sync... -(AIS Parse): Executing function... -(AIS Parse): Processing command 5: 0x58535901. -(AIS Parse): Performing Opcode Sync... -(AIS Parse): Loading section... -(AIS Parse): Loaded 326516-Byte section to address 0xC1080000. -(AIS Parse): Processing command 6: 0x58535906. -(AIS Parse): Performing Opcode Sync... -(AIS Parse): Performing jump and close... -(AIS Parse): AIS complete. Jump to address 0xC1080000. -(AIS Parse): Waiting for DONE... -(AIS Parse): Boot completed successfully. - -Operation completed successfully. - -Falcon Bootmode (boot linux without booting U-Boot) -=================================================== - -The Falcon Mode extends this way allowing to start the Linux kernel directly -from SPL. A new command is added to U-Boot to prepare the parameters that SPL -must pass to the kernel, using ATAGS or Device Tree. - -In normal mode, these parameters are generated each time before -loading the kernel, passing to Linux the address in memory where -the parameters can be read. -With Falcon Mode, this snapshot can be saved into persistent storage and SPL is -informed to load it before running the kernel. - -To boot the kernel, these steps under a Falcon-aware U-Boot are required: - -1. Boot the board into U-Boot. -Use the "spl export" command to generate the kernel parameters area or the DT. -U-Boot runs as when it boots the kernel, but stops before passing the control -to the kernel. - -Here the command sequence for the ipam390 board: -- load the linux kernel image into ram: - -U-Boot > nand read c0100000 2 200000 400000 - -NAND read: device 0 offset 0x200000, size 0x400000 - 4194304 bytes read: OK - -- generate the bootparms image: - -U-Boot > spl export atags c0100000 -## Booting kernel from Legacy Image at c0100000 ... - Image Name: Linux-3.5.1 - Image Type: ARM Linux Kernel Image (uncompressed) - Data Size: 2504280 Bytes = 2.4 MiB - Load Address: c0008000 - Entry Point: c0008000 - Verifying Checksum ... OK - Loading Kernel Image ... OK -subcommand not supported -subcommand not supported -Argument image is now in RAM at: 0xc0000100 - -- copy the bootparms image into nand: - -U-Boot > mtdparts - -device nand0 <davinci_nand.0>, # parts = 6 - #: name size offset mask_flags - 0: u-boot-env 0x00020000 0x00000000 0 - 1: u-boot 0x00160000 0x00020000 0 - 2: bootparms 0x00020000 0x00180000 0 - 3: factory-info 0x00060000 0x001a0000 0 - 4: kernel 0x00400000 0x00200000 0 - 5: rootfs 0x07a00000 0x00600000 0 - -active partition: nand0,0 - (u-boot-env) 0x00020000 @ 0x00000000 - -defaults: -mtdids : nand0=davinci_nand.0 -mtdparts: mtdparts=davinci_nand.0:128k(u-boot-env),1408k(u-boot),128k(bootparms),384k(factory-info),4M(kernel),-(rootfs) -U-Boot > nand erase.part bootparms - -NAND erase.part: device 0 offset 0x180000, size 0x20000 -Erasing at 0x180000 -- 100% complete. -OK -U-Boot > nand write c0000100 180000 20000 - -NAND write: device 0 offset 0x180000, size 0x20000 - 131072 bytes written: OK -U-Boot > - -You can use also the predefined U-Boot Environment variable "setbootparms", -which will do all the above steps in one command: - -U-Boot > print setbootparms -setbootparms=nand read c0100000 200000 400000;spl export atags c0100000;nand erase.part bootparms;nand write c0000100 180000 20000 -U-Boot > run setbootparms - -NAND read: device 0 offset 0x200000, size 0x400000 - 4194304 bytes read: OK -## Booting kernel from Legacy Image at c0100000 ... - Image Name: Linux-3.5.1 - Image Type: ARM Linux Kernel Image (uncompressed) - Data Size: 2504280 Bytes = 2.4 MiB - Load Address: c0008000 - Entry Point: c0008000 - Verifying Checksum ... OK - Loading Kernel Image ... OK -subcommand not supported -subcommand not supported -Argument image is now in RAM at: 0xc0000100 - -NAND erase.part: device 0 offset 0x180000, size 0x20000 -Erasing at 0x180000 -- 100% complete. -OK - -NAND write: device 0 offset 0x180000, size 0x20000 - 131072 bytes written: OK -U-Boot > - -Links -===== -[1] - http://sourceforge.net/projects/dvflashutils/files/OMAP-L138/ diff --git a/board/Barix/ipam390/ipam390-ais-uart.cfg b/board/Barix/ipam390/ipam390-ais-uart.cfg deleted file mode 100644 index 709cf231d01..00000000000 --- a/board/Barix/ipam390/ipam390-ais-uart.cfg +++ /dev/null @@ -1,202 +0,0 @@ -; General settings that can be overwritten in the host code -; that calls the AISGen library. -[General] - -; Can be 8 or 16 - used in emifa -busWidth=8 - -; SPIMASTER,I2CMASTER,EMIFA,NAND,EMAC,UART,PCI,HPI,USB,MMC_SD,VLYNQ,RAW -BootMode=UART - -; 8,16,24 - used for SPI,I2C -;AddrWidth=8 - -; NO_CRC,SECTION_CRC,SINGLE_CRC -crcCheckType=NO_CRC - -; This section allows setting the PLL0 system clock with a -; specified multiplier and divider as shown. The clock source -; can also be chosen for internal or external. -; |------24|------16|-------8|-------0| -; PLL0CFG0: | CLKMODE| PLLM | PREDIV | POSTDIV| -; PLL0CFG1: | RSVD | PLLDIV1| PLLDIV3| PLLDIV7| -;[PLL0CONFIG] -;PLL0CFG0 = 0x00180001 -;PLL0CFG1 = 0x00000205 - -[PLLANDCLOCKCONFIG] -PLL0CFG0 = 0x00180001 -PLL0CFG1 = 0x00000205 -PERIPHCLKCFG = 0x00000051 - -; This section allows setting up the PLL1. Usually this will -; take place as part of the EMIF3a DDR setup. The format of -; the input args is as follows: -; |------24|------16|-------8|-------0| -; PLL1CFG0: | PLLM| POSTDIV| PLLDIV1| PLLDIV2| -; PLL1CFG1: | RSVD | PLLDIV3| -[PLL1CONFIG] -PLL1CFG0 = 0x18010001 -PLL1CFG1 = 0x00000002 - -; This section lets us configure the peripheral interface -; of the current booting peripheral (I2C, SPI, or UART). -; Use with caution. The format of the PERIPHCLKCFG field -; is as follows: -; SPI: |------24|------16|-------8|-------0| -; | RSVD |PRESCALE| -; -; I2C: |------24|------16|-------8|-------0| -; | RSVD |PRESCALE| CLKL | CLKH | -; -; UART: |------24|------16|-------8|-------0| -; | RSVD | OSR | DLH | DLL | -[PERIPHCLKCFG] -PERIPHCLKCFG = 0x00000051 - -; This section can be used to configure the PLL1 and the EMIF3a registers -; for starting the DDR2 interface. -; See PLL1CONFIG section for the format of the PLL1CFG fields. -; |------24|------16|-------8|-------0| -; PLL1CFG0: | PLL1CFG | -; PLL1CFG1: | PLL1CFG | -; DDRPHYC1R: | DDRPHYC1R | -; SDCR: | SDCR | -; SDTIMR: | SDTIMR | -; SDTIMR2: | SDTIMR2 | -; SDRCR: | SDRCR | -; CLK2XSRC: | CLK2XSRC | -[EMIF3DDR] -PLL1CFG0 = 0x18010001 -PLL1CFG1 = 0x00000002 -DDRPHYC1R = 0x000000C2 -SDCR = 0x0017C432 -SDTIMR = 0x26922A09 -SDTIMR2 = 0x4414C722 -SDRCR = 0x00000498 -CLK2XSRC = 0x00000000 - -; This section can be used to configure the EMIFA to use -; CS0 as an SDRAM interface. The fields required to do this -; are given below. -; |------24|------16|-------8|-------0| -; SDBCR: | SDBCR | -; SDTIMR: | SDTIMR | -; SDRSRPDEXIT: | SDRSRPDEXIT | -; SDRCR: | SDRCR | -; DIV4p5_CLK_ENABLE: | DIV4p5_CLK_ENABLE | -;[EMIF25SDRAM] -;SDBCR = 0x00004421 -;SDTIMR = 0x42215810 -;SDRSRPDEXIT = 0x00000009 -;SDRCR = 0x00000410 -;DIV4p5_CLK_ENABLE = 0x00000001 - -; This section can be used to configure the async chip selects -; of the EMIFA (CS2-CS5). The fields required to do this -; are given below. -; |------24|------16|-------8|-------0| -; A1CR: | A1CR | -; A2CR: | A2CR | -; A3CR: | A3CR | -; A4CR: | A4CR | -; NANDFCR: | NANDFCR | -;[EMIF25ASYNC] -;A1CR = 0x00000000 -;A2CR = 0x00000000 -;A3CR = 0x00000000 -;A4CR = 0x00000000 -;NANDFCR = 0x00000000 -[EMIF25ASYNC] -A1CR = 0x00000000 -A2CR = 0x04202110 -A3CR = 0x00000000 -A4CR = 0x00000000 -NANDFCR = 0x00000012 - -; This section should be used in place of PLL0CONFIG when -; the I2C, SPI, or UART modes are being used. This ensures that -; the system PLL and the peripheral's clocks are changed together. -; See PLL0CONFIG section for the format of the PLL0CFG fields. -; See PERIPHCLKCFG section for the format of the CLKCFG field. -; |------24|------16|-------8|-------0| -; PLL0CFG0: | PLL0CFG | -; PLL0CFG1: | PLL0CFG | -; PERIPHCLKCFG: | CLKCFG | -;[PLLANDCLOCKCONFIG] -;PLL0CFG0 = 0x00180001 -;PLL0CFG1 = 0x00000205 -;PERIPHCLKCFG = 0x00010032 - -; This section should be used to setup the power state of modules -; of the two PSCs. This section can be included multiple times to -; allow the configuration of any or all of the device modules. -; |------24|------16|-------8|-------0| -; LPSCCFG: | PSCNUM | MODULE | PD | STATE | -;[PSCCONFIG] -;LPSCCFG= - -; This section allows setting of a single PINMUX register. -; This section can be included multiple times to allow setting -; as many PINMUX registers as needed. -; |------24|------16|-------8|-------0| -; REGNUM: | regNum | -; MASK: | mask | -; VALUE: | value | -;[PINMUX] -;REGNUM = 5 -;MASK = 0x00FF0000 -;VALUE = 0x00880000 - -; No Params required - simply include this section for the fast boot -; function to be called -;[FASTBOOT] - -; This section allows setting up the PLL1. Usually this will -; take place as part of the EMIF3a DDR setup. The format of -; the input args is as follows: -; |------24|------16|-------8|-------0| -; PLL1CFG0: | PLLM| POSTDIV| PLLDIV1| PLLDIV2| -; PLL1CFG1: | RSVD | PLLDIV3| -;[PLL1CONFIG] -;PLL1CFG0 = 0x15010001 -;PLL1CFG1 = 0x00000002 - -; This section can be used to configure the PLL1 and the EMIF3a registers -; for starting the DDR2 interface on ARM-boot D800K002 devices. -; |------24|------16|-------8|-------0| -; DDRPHYC1R: | DDRPHYC1R | -; SDCR: | SDCR | -; SDTIMR: | SDTIMR | -; SDTIMR2: | SDTIMR2 | -; SDRCR: | SDRCR | -; CLK2XSRC: | CLK2XSRC | -;[ARM_EMIF3DDR_PATCHFXN] -;DDRPHYC1R = 0x000000C2 -;SDCR = 0x0017C432 -;SDTIMR = 0x26922A09 -;SDTIMR2 = 0x4414C722 -;SDRCR = 0x00000498 -;CLK2XSRC = 0x00000000 - -; This section can be used to configure the PLL1 and the EMIF3a registers -; for starting the DDR2 interface on DSP-boot D800K002 devices. -; |------24|------16|-------8|-------0| -; DDRPHYC1R: | DDRPHYC1R | -; SDCR: | SDCR | -; SDTIMR: | SDTIMR | -; SDTIMR2: | SDTIMR2 | -; SDRCR: | SDRCR | -; CLK2XSRC: | CLK2XSRC | -;[DSP_EMIF3DDR_PATCHFXN] -;DDRPHYC1R = 0x000000C4 -;SDCR = 0x08134632 -;SDTIMR = 0x26922A09 -;SDTIMR2 = 0x0014C722 -;SDRCR = 0x00000492 -;CLK2XSRC = 0x00000000 - -;[INPUTFILE] -;FILENAME=u-boot.bin -;LOADADDRESS=0xC1080000 -;ENTRYPOINTADDRESS=0xC1080000 diff --git a/board/Barix/ipam390/ipam390.c b/board/Barix/ipam390/ipam390.c deleted file mode 100644 index da75ead9bfa..00000000000 --- a/board/Barix/ipam390/ipam390.c +++ /dev/null @@ -1,335 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * Based on: - * U-Boot:board/davinci/da8xxevm/da850evm.c - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on da830evm.c. Original Copyrights follow: - * - * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com> - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - */ - -#include <common.h> -#include <i2c.h> -#include <net.h> -#include <netdev.h> -#include <spi.h> -#include <spi_flash.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/emac_defs.h> -#include <asm/arch/pinmux_defs.h> -#include <asm/io.h> -#include <asm/arch/davinci_misc.h> -#include <linux/errno.h> -#include <asm/gpio.h> -#include <hwconfig.h> -#include <bootstage.h> -#include <asm/mach-types.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_DRIVER_TI_EMAC -#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII -#define HAS_RMII 1 -#else -#define HAS_RMII 0 -#endif -#endif /* CONFIG_DRIVER_TI_EMAC */ - -void dsp_lpsc_on(unsigned domain, unsigned int id) -{ - dv_reg_p mdstat, mdctl, ptstat, ptcmd; - struct davinci_psc_regs *psc_regs; - - psc_regs = davinci_psc0_regs; - mdstat = &psc_regs->psc0.mdstat[id]; - mdctl = &psc_regs->psc0.mdctl[id]; - ptstat = &psc_regs->ptstat; - ptcmd = &psc_regs->ptcmd; - - while (*ptstat & (0x1 << domain)) - ; - - if ((*mdstat & 0x1f) == 0x03) - return; /* Already on and enabled */ - - *mdctl |= 0x03; - - *ptcmd = 0x1 << domain; - - while (*ptstat & (0x1 << domain)) - ; - while ((*mdstat & 0x1f) != 0x03) - ; /* Probably an overkill... */ -} - -static void dspwake(void) -{ - unsigned *resetvect = (unsigned *)DAVINCI_L3CBARAM_BASE; - u32 val; - - /* if the device is ARM only, return */ - if ((readl(CHIP_REV_ID_REG) & 0x3f) == 0x10) - return; - - if (hwconfig_subarg_cmp_f("dsp", "wake", "no", NULL)) - return; - - *resetvect++ = 0x1E000; /* DSP Idle */ - /* clear out the next 10 words as NOP */ - memset(resetvect, 0, sizeof(unsigned) * 10); - - /* setup the DSP reset vector */ - writel(DAVINCI_L3CBARAM_BASE, HOST1CFG); - - dsp_lpsc_on(1, DAVINCI_LPSC_GEM); - val = readl(PSC0_MDCTL + (15 * 4)); - val |= 0x100; - writel(val, (PSC0_MDCTL + (15 * 4))); -} - -int misc_init_r(void) -{ - dspwake(); - return 0; -} - -static const struct pinmux_config gpio_pins[] = { - /* GP7[14] selects bootmode*/ - { pinmux(16), 8, 3 }, /* GP7[14] */ -}; - -const struct pinmux_resource pinmuxes[] = { -#ifdef CONFIG_DRIVER_TI_EMAC - PINMUX_ITEM(emac_pins_mdio), -#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII - PINMUX_ITEM(emac_pins_rmii), -#else - PINMUX_ITEM(emac_pins_mii), -#endif -#endif - PINMUX_ITEM(uart2_pins_txrx), - PINMUX_ITEM(uart2_pins_rtscts), - PINMUX_ITEM(uart0_pins_txrx), - PINMUX_ITEM(uart0_pins_rtscts), -#ifdef CONFIG_NAND_DAVINCI - PINMUX_ITEM(emifa_pins_cs3), - PINMUX_ITEM(emifa_pins_nand), -#endif - PINMUX_ITEM(gpio_pins), -}; - -const int pinmuxes_size = ARRAY_SIZE(pinmuxes); - -const struct lpsc_resource lpsc[] = { - { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ - { DAVINCI_LPSC_EMAC }, /* image download */ - { DAVINCI_LPSC_UART2 }, /* console */ - { DAVINCI_LPSC_UART0 }, /* console */ - { DAVINCI_LPSC_GPIO }, -}; - -const int lpsc_size = ARRAY_SIZE(lpsc); - -#ifndef CONFIG_DA850_EVM_MAX_CPU_CLK -#define CONFIG_DA850_EVM_MAX_CPU_CLK 300000000 -#endif - -#define REV_AM18X_EVM 0x100 - -/* - * get_board_rev() - setup to pass kernel board revision information - * Returns: - * bit[0-3] Maximum cpu clock rate supported by onboard SoC - * 0000b - 300 MHz - * 0001b - 372 MHz - * 0010b - 408 MHz - * 0011b - 456 MHz - */ -u32 get_board_rev(void) -{ - char *s; - u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK; - u32 rev = 0; - - s = env_get("maxcpuclk"); - if (s) - maxcpuclk = simple_strtoul(s, NULL, 10); - - if (maxcpuclk >= 456000000) - rev = 3; - else if (maxcpuclk >= 408000000) - rev = 2; - else if (maxcpuclk >= 372000000) - rev = 1; -#ifdef CONFIG_DA850_AM18X_EVM - rev |= REV_AM18X_EVM; -#endif - return rev; -} - -int board_early_init_f(void) -{ - /* - * Power on required peripherals - * ARM does not have access by default to PSC0 and PSC1 - * assuming here that the DSP bootloader has set the IOPU - * such that PSC access is available to ARM - */ - if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc))) - return 1; - - return 0; -} - -int board_init(void) -{ - irq_init(); - - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* setup the SUSPSRC for ARM to control emulation suspend */ - writel(readl(&davinci_syscfg_regs->suspsrc) & - ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | - DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | - DAVINCI_SYSCFG_SUSPSRC_UART0), - &davinci_syscfg_regs->suspsrc); - - /* configure pinmux settings */ - if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) - return 1; - -#ifdef CONFIG_DRIVER_TI_EMAC - davinci_emac_mii_mode_sel(HAS_RMII); -#endif /* CONFIG_DRIVER_TI_EMAC */ - - /* enable the console UART */ - writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | - DAVINCI_UART_PWREMU_MGMT_UTRST), -#if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE) - &davinci_uart0_ctrl_regs->pwremu_mgmt); -#else - &davinci_uart2_ctrl_regs->pwremu_mgmt); -#endif - return 0; -} - -#ifdef CONFIG_DRIVER_TI_EMAC -/* - * Initializes on-board ethernet controllers. - */ -int board_eth_init(bd_t *bis) -{ - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - return 0; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ - -static int init_led(int gpio, char *name, int val) -{ - int ret; - - ret = gpio_request(gpio, name); - if (ret) - return -1; - ret = gpio_direction_output(gpio, val); - if (ret) - return -1; - - return gpio; -} - -#define LED_ON 0 -#define LED_OFF 1 - -#if !defined(CONFIG_SPL_BUILD) -#ifdef CONFIG_SHOW_BOOT_PROGRESS -void show_boot_progress(int status) -{ - static int red; - static int green; - - if (red == 0) - red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON); - if (red != CONFIG_IPAM390_GPIO_LED_RED) - return; - if (green == 0) - green = init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", - LED_OFF); - if (green != CONFIG_IPAM390_GPIO_LED_GREEN) - return; - - switch (status) { - case BOOTSTAGE_ID_RUN_OS: - /* - * set normal state - * LED Red : on - * LED green: off - */ - gpio_set_value(red, LED_ON); - gpio_set_value(green, LED_OFF); - break; - case BOOTSTAGE_ID_MAIN_LOOP: - /* - * U-Boot operation - * LED Red : on - * LED green: on - */ - gpio_set_value(red, LED_ON); - gpio_set_value(green, LED_ON); - break; - } -} -#endif -#endif - -#ifdef CONFIG_SPL_OS_BOOT -int spl_start_uboot(void) -{ - int ret; - int bootmode = 0; - - /* - * GP7[14] selects bootmode: - * 1: boot linux - * 0: boot u-boot - * if error accessing gpio boot U-Boot - * - * SPL bootmode - * 0: boot linux - * 1: boot u-boot - */ - ret = gpio_request(CONFIG_IPAM390_GPIO_BOOTMODE , "bootmode"); - if (ret) - bootmode = 1; - if (!bootmode) { - ret = gpio_direction_input(CONFIG_IPAM390_GPIO_BOOTMODE); - if (ret) - bootmode = 1; - } - if (!bootmode) - ret = gpio_get_value(CONFIG_IPAM390_GPIO_BOOTMODE); - if (!bootmode) - if (ret == 0) - bootmode = 1; - /* - * LED red : on - * LED green: off - */ - init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON); - init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF); - return bootmode; -} -#endif diff --git a/board/Barix/ipam390/u-boot-spl-ipam390.lds b/board/Barix/ipam390/u-boot-spl-ipam390.lds deleted file mode 100644 index 06ed3fa89f8..00000000000 --- a/board/Barix/ipam390/u-boot-spl-ipam390.lds +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * (C) Copyright 2008 - * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> - */ - -MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\ - LENGTH = CONFIG_SPL_MAX_FOOTPRINT } - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - __start = .; - *(.vectors) - arch/arm/cpu/arm926ejs/start.o (.text*) - *(.text*) - } >.sram - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram - - . = ALIGN(4); - .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram - - . = ALIGN(4); - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } >.sram - - .bss : - { - . = ALIGN(4); - __bss_start = .; - *(.bss*) - . = ALIGN(4); - __bss_end = .; - } >.sram - - __image_copy_end = .; - - .end : - { - *(.__end) - } >.sram -} diff --git a/configs/ipam390_defconfig b/configs/ipam390_defconfig deleted file mode 100644 index f2270264bda..00000000000 --- a/configs/ipam390_defconfig +++ /dev/null @@ -1,45 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_SYS_TEXT_BASE=0xc1080000 -CONFIG_TARGET_IPAM390=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SPL=y -CONFIG_MISC_INIT_R=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_TEXT_BASE=0x80000000 -CONFIG_SPL_BOARD_INIT=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_SPL_OS_BOOT=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="U-Boot > " -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_NAND_OFS=0x00180000 -CONFIG_CMD_SPL_WRITE_SIZE=0x400 -CONFIG_CMD_ASKENV=y -CONFIG_CRC32_VERIFY=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_NAND=y -CONFIG_CMD_NAND_TRIMFFS=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=davinci_nand.0:128k(u-boot-env),1408k(u-boot),128k(bootparms),384k(factory-info),4M(kernel),-(rootfs)" -CONFIG_CMD_DIAG=y -CONFIG_CMD_UBI=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_DA8XX_GPIO=y -# CONFIG_MMC is not set -CONFIG_NAND=y -CONFIG_NAND_DAVINCI=y -CONFIG_DRIVER_TI_EMAC=y -CONFIG_SYS_NS16550=y diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h deleted file mode 100644 index e4e8e2ad7a9..00000000000 --- a/include/configs/ipam390.h +++ /dev/null @@ -1,237 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * Based on: - * U-Boot:include/configs/da850evm.h - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ - -/* - * SoC Configuration - */ -#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ -#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - -/* memtest start addr */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) - -/* memtest will be run on 16MB */ -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024) - -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ - DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ - DAVINCI_SYSCFG_SUSPSRC_UART2 | \ - DAVINCI_SYSCFG_SUSPSRC_UART0 | \ - DAVINCI_SYSCFG_SUSPSRC_EMAC) - -/* - * PLL configuration - */ - -#define CONFIG_SYS_DA850_PLL0_PLLM 24 -#define CONFIG_SYS_DA850_PLL1_PLLM 24 - -/* - * DDR2 memory configuration - */ -#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ - DV_DDR_PHY_EXT_STRBEN | \ - (0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT)) -#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000498 - -#define CONFIG_SYS_DA850_DDR2_SDBCR2 0x00000004 -#define CONFIG_SYS_DA850_DDR2_PBBPR 0x00000020 - -#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ - (13 << DV_DDR_SDTMR1_RFC_SHIFT) | \ - (2 << DV_DDR_SDTMR1_RP_SHIFT) | \ - (2 << DV_DDR_SDTMR1_RCD_SHIFT) | \ - (2 << DV_DDR_SDTMR1_WR_SHIFT) | \ - (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ - (8 << DV_DDR_SDTMR1_RC_SHIFT) | \ - (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ - (1 << DV_DDR_SDTMR1_WTR_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \ - (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ - (2 << DV_DDR_SDTMR2_XP_SHIFT) | \ - (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ - (14 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ - (0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ - (1 << DV_DDR_SDTMR2_RTP_SHIFT) | \ - (2 << DV_DDR_SDTMR2_CKE_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDBCR ( \ - (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \ - (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) | \ - (1 << DV_DDR_SDCR_DDREN_SHIFT) | \ - (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ - (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ - (2 << DV_DDR_SDCR_CL_SHIFT) | \ - (3 << DV_DDR_SDCR_IBANK_SHIFT) | \ - (2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) - -#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \ - DAVINCI_ABCR_WSTROBE(2) | \ - DAVINCI_ABCR_WHOLD(0) | \ - DAVINCI_ABCR_RSETUP(1) | \ - DAVINCI_ABCR_RSTROBE(2) | \ - DAVINCI_ABCR_RHOLD(1) | \ - DAVINCI_ABCR_TA(0) | \ - DAVINCI_ABCR_ASIZE_8BIT) - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) - -/* - * Flash & Environment - */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_CS 3 -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_NAND_MASK_CLE 0x10 -#define CONFIG_SYS_NAND_MASK_ALE 0x8 -#undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST -#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x120000 -#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000 -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ - CONFIG_SYS_NAND_U_BOOT_SIZE - \ - CONFIG_SYS_MALLOC_LEN - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_NAND_ECCPOS { \ - 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \ - 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \ - 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \ - 54, 55, 56, 57, 58, 59, 60, 61, 62, 63} -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 10 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_NAND_LOAD - -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_DRIVER_TI_EMAC_USE_RMII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -/* - * U-Boot general configuration - */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_MX_CYCLIC - -/* - * Linux Information - */ -#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_HWCONFIG /* enable hwconfig */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \ - "root=/dev/mtdblock5 rw noinitrd " \ - "rootfstype=jffs2 noinitrd\0" \ - "hwconfig=dsp:wake=yes\0" \ - "bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \ - "bootfile=uImage\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "mtddevname=uboot-env\0" \ - "mtddevnum=0\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "u-boot=/tftpboot/ipam390/u-boot.ais\0" \ - "upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \ - "nand write c0000000 20000 ${filesize}\0" \ - "setbootparms=nand read c0100000 200000 400000;" \ - "run defbootargs addmtd;" \ - "spl export atags c0100000;" \ - "nand erase.part bootparms;" \ - "nand write c0000100 180000 20000\0" \ - "\0" - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -/* defines for SPL */ -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_STACK 0x8001ff00 -#define CONFIG_SPL_MAX_SIZE 0x20000 -#define CONFIG_SPL_MAX_FOOTPRINT 32768 - -/* additions for new relocation code, must added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0xc0000000 - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) - -/* add FALCON boot mode */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 -#define CONFIG_SYS_SPL_ARGS_ADDR LINUX_BOOT_PARAM_ADDR - -/* GPIO support */ -#define CONFIG_IPAM390_GPIO_BOOTMODE ((16 * 7) + 14) - -#define CONFIG_SHOW_BOOT_PROGRESS -#define CONFIG_IPAM390_GPIO_LED_RED ((16 * 7) + 11) -#define CONFIG_IPAM390_GPIO_LED_GREEN ((16 * 7) + 12) - -#include <asm/arch/hardware.h> - -#endif /* __CONFIG_H */ |