summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Makefile2
-rw-r--r--arch/arm/mach-airoha/an7581/init.c3
-rw-r--r--board/raidsonic/ib62x0/MAINTAINERS2
-rw-r--r--board/samsung/e850-96/e850-96.c9
-rw-r--r--common/Makefile6
-rw-r--r--common/spl/spl_fit.c53
-rw-r--r--configs/e850-96_defconfig1
-rw-r--r--configs/r8a779g0_whitehawk_defconfig4
-rw-r--r--configs/r8a779g3_sparrowhawk_defconfig4
-rw-r--r--doc/develop/release_cycle.rst2
-rw-r--r--doc/usage/cmd/gpt.rst93
-rw-r--r--doc/usage/cmd/wget.rst7
-rw-r--r--drivers/net/designware.c2
-rw-r--r--include/image.h2
-rw-r--r--lib/rsa/rsa-verify.c2
-rw-r--r--lib/uuid.c162
-rw-r--r--test/common/print.c3
-rw-r--r--test/py/tests/test_gpt.py27
-rw-r--r--tools/Makefile3
-rw-r--r--tools/image-host.c4
20 files changed, 281 insertions, 110 deletions
diff --git a/Makefile b/Makefile
index 03290bbbbd4..e60bbb01a00 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
VERSION = 2025
PATCHLEVEL = 07
SUBLEVEL =
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
NAME =
# *DOCUMENTATION*
diff --git a/arch/arm/mach-airoha/an7581/init.c b/arch/arm/mach-airoha/an7581/init.c
index cefe9c6db9e..d149e0ee3c8 100644
--- a/arch/arm/mach-airoha/an7581/init.c
+++ b/arch/arm/mach-airoha/an7581/init.c
@@ -2,6 +2,7 @@
#include <fdtdec.h>
#include <init.h>
+#include <sysreset.h>
#include <asm/armv8/mmu.h>
#include <asm/system.h>
@@ -21,7 +22,7 @@ int dram_init_banksize(void)
return fdtdec_setup_memory_banksize();
}
-void reset_cpu(ulong addr)
+void reset_cpu(void)
{
psci_system_reset();
}
diff --git a/board/raidsonic/ib62x0/MAINTAINERS b/board/raidsonic/ib62x0/MAINTAINERS
index 423aa0cf253..2822eb0d29d 100644
--- a/board/raidsonic/ib62x0/MAINTAINERS
+++ b/board/raidsonic/ib62x0/MAINTAINERS
@@ -1,5 +1,5 @@
IB62X0 BOARD
-M: Luka Perkov <luka@openwrt.org>
+M: Tony Dinh <mibodhi@gmail.com>
S: Maintained
F: board/raidsonic/ib62x0/
F: include/configs/ib62x0.h
diff --git a/board/samsung/e850-96/e850-96.c b/board/samsung/e850-96/e850-96.c
index 0bef68d2fb2..3bbd95201b5 100644
--- a/board/samsung/e850-96/e850-96.c
+++ b/board/samsung/e850-96/e850-96.c
@@ -19,8 +19,17 @@ int dram_init_banksize(void)
int board_init(void)
{
+ return 0;
+}
+
+int board_late_init(void)
+{
int err;
+ /*
+ * Do this in board_late_init() to make sure MMC is not probed before
+ * efi_init_early().
+ */
err = load_ldfw();
if (err)
printf("ERROR: LDFW loading failed (%d)\n", err);
diff --git a/common/Makefile b/common/Makefile
index 35991562a12..d62ea34599e 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -19,6 +19,12 @@ obj-y += version.o
# # boards
obj-y += board_f.o
obj-y += board_r.o
+ifdef CONFIG_$(PHASE_)SYS_THUMB_BUILD
+ifneq ($(CONFIG_SYS_ARM_ARCH),7)
+CFLAGS_REMOVE_board_f.o := $(LTO_CFLAGS)
+CFLAGS_REMOVE_board_r.o := $(LTO_CFLAGS)
+endif
+endif
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
obj-$(CONFIG_DISPLAY_BOARDINFO_LATE) += board_info.o
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index 86506d6905c..b3824af475f 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -86,11 +86,12 @@ static int spl_fit_get_image_name(const struct spl_fit_info *ctx,
str = name;
for (i = 0; i < index; i++) {
- str = strchr(str, '\0') + 1;
- if (!str || (str - name >= len)) {
+ str = memchr(str, '\0', name + len - str);
+ if (!str) {
found = false;
break;
}
+ str++;
}
if (!found && CONFIG_IS_ENABLED(SYSINFO) && !sysinfo_get(&sysinfo)) {
@@ -199,7 +200,7 @@ static int get_aligned_image_size(struct spl_load_info *info, int data_size,
* the image gets loaded to the address pointed to by the
* load_addr member in this struct, if load_addr is not 0
*
- * Return: 0 on success, -EPERM if this image is not the correct phase
+ * Return: 0 on success, -EBADSLT if this image is not the correct phase
* (for CONFIG_BOOTMETH_VBE_SIMPLE_FW), or another negative error number on
* other error.
*/
@@ -235,7 +236,7 @@ static int load_simple_fit(struct spl_load_info *info, ulong fit_offset,
return ret;
} else {
log_debug("- phase mismatch, skipping this image\n");
- return -EPERM;
+ return -EBADSLT;
}
}
@@ -474,7 +475,7 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image,
image_info.load_addr = (ulong)tmpbuffer;
ret = load_simple_fit(info, offset, ctx, node,
&image_info);
- if (ret == -EPERM)
+ if (ret == -EBADSLT)
continue;
else if (ret < 0)
break;
@@ -702,13 +703,51 @@ static int spl_simple_fit_read(struct spl_fit_info *ctx,
*/
size = get_aligned_image_size(info, size, 0);
buf = board_spl_fit_buffer_addr(size, size, 1);
+ if (!buf) {
+ /*
+ * We assume that none of the board will ever use 0x0 as a
+ * valid load address. Theoretically some board could use it,
+ * but this is extremely unlikely.
+ */
+ return -EIO;
+ }
count = info->read(info, offset, size, buf);
+ if (!count) {
+ /*
+ * FIT could not be read. This means we should free the
+ * memory allocated by board_spl_fit_buffer_addr().
+ * Unfortunately, we don't know what memory allocation
+ * mechanism was used:
+ * - For the SPL_SYS_MALLOC_SIMPLE case nothing could
+ * be done. The memory just could not be freed.
+ * - For statically allocated memory buffer we can try
+ * to reuse previously allocated memory (example:
+ * board_spl_fit_buffer_addr() function from the
+ * file test/image/spl_load.c).
+ * - For normall malloc() -- memory leak can't be easily
+ * avoided. To somehow reduce memory consumption the
+ * next calls of board_spl_fit_buffer_addr() could
+ * reallocate previously allocated buffer and use
+ * them again. This is somethat similar to the approach
+ * used for statically allocated buffer.
+ *
+ * Please note:
+ * - FIT images with data placed outside of the FIT
+ * structure will cause small memory leak (several
+ * kilobytes),
+ * - FIT images with data placed inside to the FIT
+ * structure may cause huge memory leak (up to
+ * several megabytes). Do NOT use such images!
+ */
+ return -EIO;
+ }
+
ctx->fit = buf;
debug("fit read offset %lx, size=%lu, dst=%p, count=%lu\n",
offset, size, buf, count);
- return (count == 0) ? -EIO : 0;
+ return 0;
}
static int spl_simple_fit_parse(struct spl_fit_info *ctx)
@@ -834,7 +873,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
image_info.load_addr = 0;
ret = load_simple_fit(info, offset, &ctx, node, &image_info);
- if (ret < 0 && ret != -EPERM) {
+ if (ret < 0 && ret != -EBADSLT) {
printf("%s: can't load image loadables index %d (ret = %d)\n",
__func__, index, ret);
return ret;
diff --git a/configs/e850-96_defconfig b/configs/e850-96_defconfig
index e07e4cffd0a..f0e9ff7c447 100644
--- a/configs/e850-96_defconfig
+++ b/configs/e850-96_defconfig
@@ -19,6 +19,7 @@ CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_BOOTSTD_FULL=y
CONFIG_DEFAULT_FDT_FILE="exynos850-e850-96.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_LATE_INIT=y
CONFIG_CMD_BOOTEFI_SELFTEST=y
CONFIG_CMD_ABOOTIMG=y
CONFIG_CMD_NVEDIT_EFI=y
diff --git a/configs/r8a779g0_whitehawk_defconfig b/configs/r8a779g0_whitehawk_defconfig
index fefe356ed2b..41217fa5776 100644
--- a/configs/r8a779g0_whitehawk_defconfig
+++ b/configs/r8a779g0_whitehawk_defconfig
@@ -26,7 +26,9 @@ CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_RENESAS_RAVB=y
CONFIG_BAUDRATE=921600
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xeb300000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
+CONFIG_SPL_STACK=0xe6400000
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_TEXT_BASE=0xeb210000
CONFIG_SPL_STACK_R_ADDR=0x44000000
diff --git a/configs/r8a779g3_sparrowhawk_defconfig b/configs/r8a779g3_sparrowhawk_defconfig
index 47fc536df81..7202828cd66 100644
--- a/configs/r8a779g3_sparrowhawk_defconfig
+++ b/configs/r8a779g3_sparrowhawk_defconfig
@@ -29,7 +29,9 @@ CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_RENESAS_RAVB=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xeb300000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_HAVE_INIT_STACK=y
+CONFIG_SPL_STACK=0xe6400000
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_TEXT_BASE=0xeb210000
CONFIG_SPL_STACK_R_ADDR=0x44000000
diff --git a/doc/develop/release_cycle.rst b/doc/develop/release_cycle.rst
index fee7cca2628..408820e3cd5 100644
--- a/doc/develop/release_cycle.rst
+++ b/doc/develop/release_cycle.rst
@@ -79,7 +79,7 @@ For the next scheduled release, release candidates were made on::
* U-Boot |next_ver|-rc4 was released on Mon 09 June 2025.
-.. * U-Boot |next_ver|-rc5 was released on Mon 23 June 2025.
+* U-Boot |next_ver|-rc5 was released on Mon 23 June 2025.
Please note that the following dates are planned only and may be deviated from
as needed.
diff --git a/doc/usage/cmd/gpt.rst b/doc/usage/cmd/gpt.rst
index 8534f78cbac..13e8783be9b 100644
--- a/doc/usage/cmd/gpt.rst
+++ b/doc/usage/cmd/gpt.rst
@@ -54,7 +54,7 @@ partition string
* name=<NAME> - The partition name, required
* start=<BYTES> - The partition start offset in bytes, required
- * size=<BYTES> - The partition size in bytes or "-" to expand it to the whole free area
+ * size=<BYTES> - The partition size in bytes or "-" for the last partition to expand it to the whole free area
* bootable - Set the legacy bootable flag
* uuid=<UUID> - The partition UUID, optional if CONFIG_RANDOM_UUID=y is enabled
* type=<UUID> - The partition type GUID, requires CONFIG_PARTITION_TYPE_GUID=y
@@ -63,6 +63,23 @@ partition string
If 'uuid' is not specified, but CONFIG_RANDOM_UUID is enabled, a random UUID
will be generated for the partition
+ If 'type' is not specified or without CONFIG_PARTITION_TYPE_GUID=y,
+ the used partition type GUID is PARTITION_BASIC_DATA_GUID.
+
+ Some strings can be also used at the place of the known partition type GUID:
+ * "mbr" = LEGACY_MBR_PARTITION_GUID (024DEE41-33E7-11D3-9D69-0008C781F39F)
+ * "msft" = PARTITION_MSFT_RESERVED_GUID (E3C9E316-0B5C-4DB8-817D-F92DF00215AE)
+ * "data" = PARTITION_BASIC_DATA_GUID (EBD0A0A2-B9E5-4433-87C0-68B6B72699C7)
+ * "linux" = PARTITION_LINUX_FILE_SYSTEM_DATA_GUID (0FC63DAF-8483-4772-8E79-3D69D8477DE4)
+ * "raid" = PARTITION_LINUX_RAID_GUID (A19D880F-05FC-4D3B-A006-743F0F84911E)
+ * "swap" = PARTITION_LINUX_SWAP_GUID (0657FD6D-A4AB-43C4-84E5-0933C84B4F4F)
+ * "lvm" = PARTITION_LINUX_LVM_GUID (E6D6D379-F507-44C2-A23C-238F2A3DF928)
+ * "u-boot-env" = PARTITION_U_BOOT_ENVIRONMENT(3DE21764-95BD-54BD-A5C3-4ABE786F38A8)
+ * "system" = PARTITION_SYSTEM_GUID (C12A7328-F81F-11D2-BA4B-00A0C93EC93B)
+
+ The GPT partitions layout and associated 'type' are also printed with the
+ :doc:`part command <part>` command by typing "part list".
+
gpt enumerate
~~~~~~~~~~~~~
@@ -162,16 +179,17 @@ Examples
Create 6 partitions on a disk::
- => setenv gpt_parts 'uuid_disk=bec9fc2a-86c1-483d-8a0e-0109732277d7;
- name=boot,start=4M,size=128M,bootable,type=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7,
- name=rootfs,size=3072M,type=0fc63daf-8483-4772-8e79-3d69d8477de4;
- name=system-data,size=512M,type=0fc63daf-8483-4772-8e79-3d69d8477de4;
- name=[ext],size=-,type=0fc63daf-8483-4772-8e79-3d69d8477de4;
- name=user,size=-,type=0fc63daf-8483-4772-8e79-3d69d8477de4;
- name=modules,size=100M,type=0fc63daf-8483-4772-8e79-3d69d8477de4;
- name=ramdisk,size=8M,type=0fc63daf-8483-4772-8e79-3d69d8477de4
+ => setenv gpt_parts 'uuid_disk=bec9fc2a-86c1-483d-8a0e-0109732277d7;\
+ name=boot,start=4M,size=128M,bootable,type=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7;\
+ name=rootfs,size=3072M,type=0fc63daf-8483-4772-8e79-3d69d8477de4;\
+ name=system-data,size=512M,type=0fc63daf-8483-4772-8e79-3d69d8477de4;\
+ name=user,size=512M,type=0fc63daf-8483-4772-8e79-3d69d8477de4;\
+ name=modules,size=100M,type=0fc63daf-8483-4772-8e79-3d69d8477de4;\
+ name=ramdisk,size=8M,type=0fc63daf-8483-4772-8e79-3d69d8477de4;\
+ name=[ext],size=-,type=0fc63daf-8483-4772-8e79-3d69d8477de4'
=> gpt write mmc 0 $gpt_parts
+Last partition "[ext]" with '-' is extended up to the end of the disk
Verify that the device matches the partition layout described in the variable
$gpt_parts::
@@ -228,3 +246,60 @@ Swap the order of the 'boot' and 'rootfs' partition table entries::
=> gpt setenv mmc 0 boot
=> echo ${gpt_partition_entry}
2
+
+Other example: a disk with known partition types::
+
+ => setenv gpt_parts 'name=u-boot,size=32M,type=data;\
+ name=env,size=1M,type=u-boot-env;
+ name=ESP,size=128M,type=system;
+ name=rootfs,size=3072M,type=linux;
+ name=swap,size=100M,type=swap;
+ name=user,size=-,type=linux'
+ => gpt write mmc 0 $gpt_parts
+
+ => part list mmc 0
+ Partition Map for mmc device 0 -- Partition Type: EFI
+ Part Start LBA End LBA Name
+ Attributes
+ Type GUID
+ Partition GUID
+ 1 0x00000022 0x00010021 "u-boot"
+ attrs: 0x0000000000000000
+ type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
+ (data)
+ guid: 502d48f6-81c0-488f-bdc0-ad602498f3ce
+ 2 0x00010022 0x00010821 "env"
+ attrs: 0x0000000000000000
+ type: 3de21764-95bd-54bd-a5c3-4abe786f38a8
+ (u-boot-env)
+ guid: 9dc62338-459a-485e-bd8f-b3fbf728d9c0
+ 3 0x00010822 0x00050821 "ESP"
+ attrs: 0x0000000000000000
+ type: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ (EFI System Partition)
+ guid: 8a3a1168-6af8-4ba7-a95d-9cd0d14e1b3d
+ 4 0x00050822 0x00650821 "rootfs"
+ attrs: 0x0000000000000000
+ type: 0fc63daf-8483-4772-8e79-3d69d8477de4
+ (linux)
+ guid: 411ffebc-8a19-469d-99a9-0982409a6851
+ 5 0x00650822 0x00682821 "swap"
+ attrs: 0x0000000000000000
+ type: 0657fd6d-a4ab-43c4-84e5-0933c84b4f4f
+ (swap)
+ guid: f8ec0410-95ec-4e3e-8b98-fb8cf271a201
+ 6 0x00682822 0x01dacbde "user"
+ attrs: 0x0000000000000000
+ type: 0fc63daf-8483-4772-8e79-3d69d8477de4
+ (linux)
+ guid: c5543e1c-566d-4502-99ad-20545007e673
+
+Modifying GPT partition layout from U-Boot::
+
+ => gpt read mmc 0 current_partitions
+ => env edit current_partitions
+ edit: uuid_disk=[...];name=part1,start=0x4000,size=0x4000,uuid=[...];
+ name=part2,start=0xc000,size=0xc000,uuid=[...];[ . . . ]
+
+ => gpt write mmc 0 $current_partitions
+ => gpt verify mmc 0 $current_partitions
diff --git a/doc/usage/cmd/wget.rst b/doc/usage/cmd/wget.rst
index 44033aaff39..06df2842549 100644
--- a/doc/usage/cmd/wget.rst
+++ b/doc/usage/cmd/wget.rst
@@ -185,13 +185,6 @@ TCP Selective Acknowledgments in the legacy network stack can be enabled via
CONFIG_PROT_TCP_SACK=y. This will improve the download speed. Selective
Acknowledgments are enabled by default with lwIP.
-.. note::
-
- U-Boot currently has no way to verify certificates for HTTPS.
- A place to store the root CA certificates is needed, and then MBed TLS would
- need to walk the entire chain. Therefore, man-in-the middle attacks are
- possible and HTTPS should not be relied upon for payload authentication.
-
Return value
------------
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 0f93c25e3fe..fce3ef910cb 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -716,7 +716,7 @@ static int _dw_free_pkt(struct dw_eth_dev *priv)
ulong desc_start = (ulong)desc_p;
ulong desc_end = desc_start +
roundup(sizeof(*desc_p), ARCH_DMA_MINALIGN);
- ulong data_start = desc_p->dmamac_addr;
+ ulong data_start = dev_bus_to_phys(priv->dev, desc_p->dmamac_addr);
ulong data_end = data_start + roundup(CFG_ETH_BUFSIZE, ARCH_DMA_MINALIGN);
/* Invalidate the descriptor buffer data */
diff --git a/include/image.h b/include/image.h
index 37506c81cdb..b695cc39447 100644
--- a/include/image.h
+++ b/include/image.h
@@ -1689,7 +1689,7 @@ struct sig_header_s {
*/
int image_pre_load(ulong addr);
-#if defined(USE_HOSTCC)
+#if defined(USE_HOSTCC) && CONFIG_IS_ENABLED(LIBCRYPTO)
/**
* rsa_verify_openssl() - Verify a signature against some data with openssl API
*
diff --git a/lib/rsa/rsa-verify.c b/lib/rsa/rsa-verify.c
index 4a0418a75f1..b65fbe44007 100644
--- a/lib/rsa/rsa-verify.c
+++ b/lib/rsa/rsa-verify.c
@@ -570,7 +570,7 @@ int rsa_verify(struct image_sign_info *info,
uint8_t hash[info->crypto->key_len];
int ret;
-#ifdef USE_HOSTCC
+#if defined(USE_HOSTCC) && CONFIG_IS_ENABLED(LIBCRYPTO)
if (!info->fdt_blob)
return rsa_verify_openssl(info, region, region_count, sig, sig_len);
#endif
diff --git a/lib/uuid.c b/lib/uuid.c
index 6abbcf27b1f..a1c88b9a622 100644
--- a/lib/uuid.c
+++ b/lib/uuid.c
@@ -62,184 +62,197 @@ int uuid_str_valid(const char *uuid)
return 1;
}
+/*
+ * Array of string (short and long) for known GUID of GPT partition type
+ * at least one string must be present, @type or @description
+ *
+ * @type : short name for the parameter 'type' of gpt command (max size UUID_STR_LEN = 36,
+ * no space), also used as fallback description when the next field is absent
+ * @description : long description associated to type GUID, used for %pUs
+ * @guid : known type GUID value
+ */
static const struct {
- const char *string;
+ const char *type;
+ const char *description;
efi_guid_t guid;
} list_guid[] = {
#ifndef USE_HOSTCC
-#if defined(CONFIG_PARTITION_TYPE_GUID) || defined(CONFIG_CMD_EFIDEBUG) || \
- defined(CONFIG_EFI)
- {"EFI System Partition", PARTITION_SYSTEM_GUID},
-#endif
-#ifdef CONFIG_PARTITION_TYPE_GUID
- {"mbr", LEGACY_MBR_PARTITION_GUID},
- {"msft", PARTITION_MSFT_RESERVED_GUID},
- {"data", PARTITION_BASIC_DATA_GUID},
- {"linux", PARTITION_LINUX_FILE_SYSTEM_DATA_GUID},
- {"raid", PARTITION_LINUX_RAID_GUID},
- {"swap", PARTITION_LINUX_SWAP_GUID},
- {"lvm", PARTITION_LINUX_LVM_GUID},
- {"u-boot-env", PARTITION_U_BOOT_ENVIRONMENT},
- {"cros-kern", PARTITION_CROS_KERNEL},
- {"cros-root", PARTITION_CROS_ROOT},
- {"cros-fw", PARTITION_CROS_FIRMWARE},
- {"cros-rsrv", PARTITION_CROS_RESERVED},
-#endif
+#if CONFIG_IS_ENABLED(EFI_PARTITION)
+ {"mbr", NULL, LEGACY_MBR_PARTITION_GUID},
+ {"msft", NULL, PARTITION_MSFT_RESERVED_GUID},
+ {"data", NULL, PARTITION_BASIC_DATA_GUID},
+ {"linux", NULL, PARTITION_LINUX_FILE_SYSTEM_DATA_GUID},
+ {"raid", NULL, PARTITION_LINUX_RAID_GUID},
+ {"swap", NULL, PARTITION_LINUX_SWAP_GUID},
+ {"lvm", NULL, PARTITION_LINUX_LVM_GUID},
+ {"u-boot-env", NULL, PARTITION_U_BOOT_ENVIRONMENT},
+ {"cros-kern", NULL, PARTITION_CROS_KERNEL},
+ {"cros-root", NULL, PARTITION_CROS_ROOT},
+ {"cros-fw", NULL, PARTITION_CROS_FIRMWARE},
+ {"cros-rsrv", NULL, PARTITION_CROS_RESERVED},
+ {
+ "system", "EFI System Partition",
+ PARTITION_SYSTEM_GUID,
+ },
#if defined(CONFIG_CMD_EFIDEBUG) || defined(CONFIG_EFI)
{
- "Device Path",
+ NULL, "Device Path",
+ PARTITION_SYSTEM_GUID,
+ },
+ {
+ NULL, "Device Path",
EFI_DEVICE_PATH_PROTOCOL_GUID,
},
{
- "Device Path To Text",
+ NULL, "Device Path To Text",
EFI_DEVICE_PATH_TO_TEXT_PROTOCOL_GUID,
},
{
- "Device Path Utilities",
+ NULL, "Device Path Utilities",
EFI_DEVICE_PATH_UTILITIES_PROTOCOL_GUID,
},
{
- "Unicode Collation 2",
+ NULL, "Unicode Collation 2",
EFI_UNICODE_COLLATION_PROTOCOL2_GUID,
},
{
- "Driver Binding",
+ NULL, "Driver Binding",
EFI_DRIVER_BINDING_PROTOCOL_GUID,
},
{
- "Simple Text Input",
+ NULL, "Simple Text Input",
EFI_SIMPLE_TEXT_INPUT_PROTOCOL_GUID,
},
{
- "Simple Text Input Ex",
+ NULL, "Simple Text Input Ex",
EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL_GUID,
},
{
- "Simple Text Output",
+ NULL, "Simple Text Output",
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL_GUID,
},
{
- "Block IO",
+ NULL, "Block IO",
EFI_BLOCK_IO_PROTOCOL_GUID,
},
{
- "Disk IO",
+ NULL, "Disk IO",
EFI_DISK_IO_PROTOCOL_GUID,
},
{
- "Simple File System",
+ NULL, "Simple File System",
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID,
},
{
- "Loaded Image",
+ NULL, "Loaded Image",
EFI_LOADED_IMAGE_PROTOCOL_GUID,
},
{
- "Loaded Image Device Path",
+ NULL, "Loaded Image Device Path",
EFI_LOADED_IMAGE_DEVICE_PATH_PROTOCOL_GUID,
},
{
- "Graphics Output",
+ NULL, "Graphics Output",
EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID,
},
{
- "HII String",
+ NULL, "HII String",
EFI_HII_STRING_PROTOCOL_GUID,
},
{
- "HII Database",
+ NULL, "HII Database",
EFI_HII_DATABASE_PROTOCOL_GUID,
},
{
- "HII Config Access",
+ NULL, "HII Config Access",
EFI_HII_CONFIG_ACCESS_PROTOCOL_GUID,
},
{
- "HII Config Routing",
+ NULL, "HII Config Routing",
EFI_HII_CONFIG_ROUTING_PROTOCOL_GUID,
},
{
- "Load File",
+ NULL, "Load File",
EFI_LOAD_FILE_PROTOCOL_GUID,
},
{
- "Load File2",
+ NULL, "Load File2",
EFI_LOAD_FILE2_PROTOCOL_GUID,
},
{
- "Random Number Generator",
+ NULL, "Random Number Generator",
EFI_RNG_PROTOCOL_GUID,
},
{
- "Simple Network",
+ NULL, "Simple Network",
EFI_SIMPLE_NETWORK_PROTOCOL_GUID,
},
{
- "PXE Base Code",
+ NULL, "PXE Base Code",
EFI_PXE_BASE_CODE_PROTOCOL_GUID,
},
{
- "Device-Tree Fixup",
+ NULL, "Device-Tree Fixup",
EFI_DT_FIXUP_PROTOCOL_GUID,
},
{
- "TCG2",
+ NULL, "TCG2",
EFI_TCG2_PROTOCOL_GUID,
},
{
- "Firmware Management",
+ NULL, "Firmware Management",
EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GUID
},
#if IS_ENABLED(CONFIG_EFI_HTTP_PROTOCOL)
{
- "HTTP",
+ NULL, "HTTP",
EFI_HTTP_PROTOCOL_GUID,
},
{
- "HTTP Service Binding",
+ NULL, "HTTP Service Binding",
EFI_HTTP_SERVICE_BINDING_PROTOCOL_GUID,
},
{
- "IPv4 Config2",
+ NULL, "IPv4 Config2",
EFI_IP4_CONFIG2_PROTOCOL_GUID,
},
#endif
/* Configuration table GUIDs */
{
- "ACPI table",
+ NULL, "ACPI table",
EFI_ACPI_TABLE_GUID,
},
{
- "EFI System Resource Table",
+ NULL, "EFI System Resource Table",
EFI_SYSTEM_RESOURCE_TABLE_GUID,
},
{
- "device tree",
+ NULL, "device tree",
EFI_FDT_GUID,
},
{
- "SMBIOS table",
+ NULL, "SMBIOS table",
SMBIOS_TABLE_GUID,
},
{
- "SMBIOS3 table",
+ NULL, "SMBIOS3 table",
SMBIOS3_TABLE_GUID,
},
{
- "Runtime properties",
+ NULL, "Runtime properties",
EFI_RT_PROPERTIES_TABLE_GUID,
},
{
- "TCG2 Final Events Table",
+ NULL, "TCG2 Final Events Table",
EFI_TCG2_FINAL_EVENTS_TABLE_GUID,
},
{
- "EFI Conformance Profiles Table",
+ NULL, "EFI Conformance Profiles Table",
EFI_CONFORMANCE_PROFILES_TABLE_GUID,
},
#ifdef CONFIG_EFI_RISCV_BOOT_PROTOCOL
{
- "RISC-V Boot",
+ NULL, "RISC-V Boot",
RISCV_EFI_BOOT_PROTOCOL_GUID,
},
#endif
@@ -247,35 +260,36 @@ static const struct {
#ifdef CONFIG_CMD_NVEDIT_EFI
/* signature database */
{
- "EFI_GLOBAL_VARIABLE_GUID",
+ "EFI_GLOBAL_VARIABLE_GUID", NULL,
EFI_GLOBAL_VARIABLE_GUID,
},
{
- "EFI_IMAGE_SECURITY_DATABASE_GUID",
+ "EFI_IMAGE_SECURITY_DATABASE_GUID", NULL,
EFI_IMAGE_SECURITY_DATABASE_GUID,
},
/* certificate types */
{
- "EFI_CERT_SHA256_GUID",
+ "EFI_CERT_SHA256_GUID", NULL,
EFI_CERT_SHA256_GUID,
},
{
- "EFI_CERT_X509_GUID",
+ "EFI_CERT_X509_GUID", NULL,
EFI_CERT_X509_GUID,
},
{
- "EFI_CERT_TYPE_PKCS7_GUID",
+ "EFI_CERT_TYPE_PKCS7_GUID", NULL,
EFI_CERT_TYPE_PKCS7_GUID,
},
#endif
#if defined(CONFIG_CMD_EFIDEBUG) || defined(CONFIG_EFI)
- { "EFI_LZMA_COMPRESSED", EFI_LZMA_COMPRESSED },
- { "EFI_DXE_SERVICES", EFI_DXE_SERVICES },
- { "EFI_HOB_LIST", EFI_HOB_LIST },
- { "EFI_MEMORY_TYPE", EFI_MEMORY_TYPE },
- { "EFI_MEM_STATUS_CODE_REC", EFI_MEM_STATUS_CODE_REC },
- { "EFI_GUID_EFI_ACPI1", EFI_GUID_EFI_ACPI1 },
+ { "EFI_LZMA_COMPRESSED", NULL, EFI_LZMA_COMPRESSED },
+ { "EFI_DXE_SERVICES", NULL, EFI_DXE_SERVICES },
+ { "EFI_HOB_LIST", NULL, EFI_HOB_LIST },
+ { "EFI_MEMORY_TYPE", NULL, EFI_MEMORY_TYPE },
+ { "EFI_MEM_STATUS_CODE_REC", NULL, EFI_MEM_STATUS_CODE_REC },
+ { "EFI_GUID_EFI_ACPI1", NULL, EFI_GUID_EFI_ACPI1 },
#endif
+#endif /* EFI_PARTITION */
#endif /* !USE_HOSTCC */
};
@@ -284,7 +298,8 @@ int uuid_guid_get_bin(const char *guid_str, unsigned char *guid_bin)
int i;
for (i = 0; i < ARRAY_SIZE(list_guid); i++) {
- if (!strcmp(list_guid[i].string, guid_str)) {
+ if (list_guid[i].type &&
+ !strcmp(list_guid[i].type, guid_str)) {
memcpy(guid_bin, &list_guid[i].guid, 16);
return 0;
}
@@ -298,7 +313,9 @@ const char *uuid_guid_get_str(const unsigned char *guid_bin)
for (i = 0; i < ARRAY_SIZE(list_guid); i++) {
if (!memcmp(list_guid[i].guid.b, guid_bin, 16)) {
- return list_guid[i].string;
+ if (list_guid[i].description)
+ return list_guid[i].description;
+ return list_guid[i].type;
}
}
return NULL;
@@ -312,10 +329,9 @@ int uuid_str_to_bin(const char *uuid_str, unsigned char *uuid_bin,
uint64_t tmp64;
if (!uuid_str_valid(uuid_str)) {
-#ifdef CONFIG_PARTITION_TYPE_GUID
- if (!uuid_guid_get_bin(uuid_str, uuid_bin))
+ if (IS_ENABLED(CONFIG_PARTITION_TYPE_GUID) &&
+ !uuid_guid_get_bin(uuid_str, uuid_bin))
return 0;
-#endif
return -EINVAL;
}
diff --git a/test/common/print.c b/test/common/print.c
index c48efc2783f..76ee851fe6a 100644
--- a/test/common/print.c
+++ b/test/common/print.c
@@ -45,8 +45,7 @@ static int print_guid(struct unit_test_state *uts)
sprintf(str, "%pUL", guid);
ut_asserteq_str("04030201-0605-0807-090A-0B0C0D0E0F10", str);
sprintf(str, "%pUs", guid_esp);
- if (IS_ENABLED(CONFIG_PARTITION_TYPE_GUID) ||
- IS_ENABLED(CONFIG_CMD_EFIDEBUG) || IS_ENABLED(CONFIG_EFI))
+ if (IS_ENABLED(CONFIG_EFI_PARTITION))
ut_asserteq_str("EFI System Partition", str);
else
ut_asserteq_str("c12a7328-f81f-11d2-ba4b-00a0c93ec93b", str);
diff --git a/test/py/tests/test_gpt.py b/test/py/tests/test_gpt.py
index cfc8f1319a9..e6d8792ac1f 100644
--- a/test/py/tests/test_gpt.py
+++ b/test/py/tests/test_gpt.py
@@ -330,6 +330,33 @@ def test_gpt_write(state_disk_image, ubman):
output = ubman.run_command('gpt guid host 0')
assert '375a56f7-d6c9-4e81-b5f0-09d41ca89efe' in output
+@pytest.mark.boardspec('sandbox')
+@pytest.mark.buildconfigspec('cmd_gpt')
+@pytest.mark.buildconfigspec('cmd_part')
+@pytest.mark.buildconfigspec('partition_type_guid')
+@pytest.mark.requiredtool('sgdisk')
+def test_gpt_write_part_type(state_disk_image, ubman):
+ """Test the gpt command with part type uuid."""
+
+ output = ubman.run_command('gpt write host 0 "name=part1,type=data,size=1M;name=part2,size=512K,type=system;name=part3,size=65536,type=u-boot-env;name=part4,size=65536,type=375a56f7-d6c9-4e81-b5f0-09d41ca89efe;name=part5,size=-,type=linux"')
+ assert 'Writing GPT: success!' in output
+ output = ubman.run_command('part list host 0')
+ assert '1\t0x00000022\t0x00000821\t"part1"' in output
+ assert 'ebd0a0a2-b9e5-4433-87c0-68b6b72699c7' in output
+ assert '(data)' in output
+ assert '2\t0x00000822\t0x00000c21\t"part2"' in output
+ assert 'c12a7328-f81f-11d2-ba4b-00a0c93ec93b' in output
+ assert '(EFI System Partition)' in output
+ assert '3\t0x00000c22\t0x00000ca1\t"part3"' in output
+ assert '3de21764-95bd-54bd-a5c3-4abe786f38a8' in output
+ assert '(u-boot-env)' in output
+ assert '4\t0x00000ca2\t0x00000d21\t"part4"' in output
+ assert 'ebd0a0a2-b9e5-4433-87c0-68b6b72699c7' in output
+ assert '(375a56f7-d6c9-4e81-b5f0-09d41ca89efe)' in output
+ assert '5\t0x00000d22\t0x00001fde\t"part5"' in output
+ assert '0fc63daf-8483-4772-8e79-3d69d8477de4' in output
+ assert '(linux)' in output
+
@pytest.mark.buildconfigspec('cmd_gpt')
@pytest.mark.buildconfigspec('cmd_gpt_rename')
@pytest.mark.buildconfigspec('cmd_part')
diff --git a/tools/Makefile b/tools/Makefile
index 97ce1dbb17e..02297e8c93a 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -63,7 +63,8 @@ HOSTCFLAGS_img2srec.o := -pedantic
hostprogs-y += mkenvimage
mkenvimage-objs := mkenvimage.o os_support.o generated/lib/crc32.o
-hostprogs-y += dumpimage mkimage fit_info fit_check_sign
+hostprogs-y += dumpimage mkimage fit_info
+hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_check_sign
hostprogs-$(CONFIG_TOOLS_LIBCRYPTO) += fdt_add_pubkey
hostprogs-$(CONFIG_TOOLS_LIBCRYPTO) += preload_check_sign
diff --git a/tools/image-host.c b/tools/image-host.c
index a9b86902763..21dd7f2d922 100644
--- a/tools/image-host.c
+++ b/tools/image-host.c
@@ -19,7 +19,7 @@
#include <openssl/evp.h>
#endif
-#if CONFIG_IS_ENABLED(IMAGE_PRE_LOAD)
+#if CONFIG_IS_ENABLED(IMAGE_PRE_LOAD) && CONFIG_IS_ENABLED(LIBCRYPTO)
#include <openssl/rsa.h>
#include <openssl/err.h>
#endif
@@ -1416,7 +1416,7 @@ int fit_check_sign(const void *fit, const void *key,
}
#endif
-#if CONFIG_IS_ENABLED(IMAGE_PRE_LOAD)
+#if CONFIG_IS_ENABLED(IMAGE_PRE_LOAD) && CONFIG_IS_ENABLED(LIBCRYPTO)
/**
* rsa_verify_openssl() - Verify a signature against some data with openssl API
*
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-05 09:32:00 +0000