diff options
| -rw-r--r-- | arch/arm/dts/Makefile | 1 | ||||
| -rw-r--r-- | board/sunxi/MAINTAINERS | 6 | ||||
| -rw-r--r-- | configs/tanix_tx1_defconfig | 25 |
3 files changed, 32 insertions, 0 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 82d37adae3f..871cfbbebab 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -678,6 +678,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \ sun50i-h6-tanix-tx6.dtb \ sun50i-h6-tanix-tx6-mini.dtb dtb-$(CONFIG_MACH_SUN50I_H616) += \ + sun50i-h313-tanix-tx1.dtb \ sun50i-h616-orangepi-zero2.dtb \ sun50i-h618-orangepi-zero2w.dtb \ sun50i-h618-orangepi-zero3.dtb \ diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 4bcd9b9af7f..4ad77c75f5e 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -549,6 +549,12 @@ S: Maintained F: configs/Sunchip_CX-A99_defconfig W: https://linux-sunxi.org/Sunchip_CX-A99 +TANIX TX1 BOARD +M: Andre Przywara <andre.przywara@arm.com> +S: Maintained +F: configs/tanix_tx1_defconfig +W: https://linux-sunxi.org/Tanix_TX1 + TANIX TX6 BOARD M: Jernej Skrabec <jernej.skrabec@siol.net> S: Maintained diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig new file mode 100644 index 00000000000..9915fff4a00 --- /dev/null +++ b/configs/tanix_tx1_defconfig @@ -0,0 +1,25 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h313-tanix-tx1" +CONFIG_SPL=y +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x06060606 +CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0d0d0d0d +CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1919 +CONFIG_DRAM_SUN50I_H616_ODT_EN=0x9988eeee +CONFIG_DRAM_SUN50I_H616_TPR6=0x2fb08080 +CONFIG_DRAM_SUN50I_H616_TPR10=0x402f4469 +CONFIG_DRAM_SUN50I_H616_TPR11=0x0e0f0d0d +CONFIG_DRAM_SUN50I_H616_TPR12=0x11131213 +CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_LPDDR3=y +CONFIG_R_I2C_ENABLE=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SLAVE=0x7f +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_AXP313_POWER=y +CONFIG_AXP_DCDC3_VOLT=1200 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y |