diff options
244 files changed, 2742 insertions, 27826 deletions
@@ -30,6 +30,7 @@ Atish Patra <atishp@atishpatra.org> <atish.patra@wdc.com> Bharat Kumar Gogada <bharat.kumar.gogada@amd.com> <bharat.kumar.gogada@xilinx.com> Bharat Kumar Gogada <bharat.kumar.gogada@amd.com> <bharatku@xilinx.com> Bhargava Sreekantappa Gayathri <bhargava.sreekantappa-gayathri@amd.com> <bhargava.sreekantappa-gayathri@xilinx.com> +Bhupesh Sharma <bhupesh.linux@gmail.com> <bhupesh.sharma@linaro.org> Bin Meng <bmeng.cn@gmail.com> <bin.meng@windriver.com> Boris Brezillon <bbrezillon@kernel.org> <boris.brezillon@bootlin.com> Boris Brezillon <bbrezillon@kernel.org> <boris.brezillon@free-electrons.com> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a0842e19330..4cdf08dd695 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1078,6 +1078,7 @@ config ARCH_SNAPDRAGON select DM_GPIO select DM_SERIAL select DM_RESET + select POWER_DOMAIN select GPIO_EXTRA_HEADER select MSM_SMEM select OF_CONTROL diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 78aeba511e0..2634bb4c9ac 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -47,33 +47,7 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \ dtb-$(CONFIG_ARCH_KIRKWOOD) += \ kirkwood-atl-sbx81lifkw.dtb \ - kirkwood-atl-sbx81lifxcat.dtb \ - kirkwood-blackarmor-nas220.dtb \ - kirkwood-d2net.dtb \ - kirkwood-dns325.dtb \ - kirkwood-dockstar.dtb \ - kirkwood-dreamplug.dtb \ - kirkwood-ds109.dtb \ - kirkwood-goflexnet.dtb \ - kirkwood-guruplug-server-plus.dtb \ - kirkwood-ib62x0.dtb \ - kirkwood-iconnect.dtb \ - kirkwood-is2.dtb \ - kirkwood-lsxhl.dtb \ - kirkwood-lschlv2.dtb \ - kirkwood-net2big.dtb \ - kirkwood-ns2.dtb \ - kirkwood-ns2lite.dtb \ - kirkwood-ns2max.dtb \ - kirkwood-ns2mini.dtb \ - kirkwood-nsa310s.dtb \ - kirkwood-nsa325.dtb \ - kirkwood-openrd-base.dtb \ - kirkwood-openrd-client.dtb \ - kirkwood-openrd-ultimate.dtb \ - kirkwood-pogo_e02.dtb \ - kirkwood-pogoplug-series-4.dtb \ - kirkwood-sheevaplug.dtb + kirkwood-atl-sbx81lifxcat.dtb dtb-$(CONFIG_MACH_S900) += \ bubblegum_96.dtb @@ -219,40 +193,8 @@ dtb-$(CONFIG_ARCH_S5P4418) += \ s5p4418-nanopi2.dtb dtb-$(CONFIG_ARCH_MESON) += \ - meson-a1-ad401.dtb \ - meson-axg-s400.dtb \ - meson-axg-jethome-jethub-j100.dtb \ - meson-gxl-s805x-libretech-ac.dtb \ - meson-gxl-s905d-libretech-pc.dtb \ - meson-gxl-s905w-jethome-jethub-j80.dtb \ - meson-gxl-s905x-khadas-vim.dtb \ - meson-gxl-s905x-libretech-cc.dtb \ - meson-gxl-s905x-libretech-cc-v2.dtb \ - meson-gxl-s905x-p212.dtb \ - meson-gxm-gt1-ultimate.dtb \ - meson-gxm-khadas-vim2.dtb \ - meson-gxm-s912-libretech-pc.dtb \ - meson-gxm-wetek-core2.dtb \ - meson-g12a-radxa-zero.dtb \ - meson-g12a-sei510.dtb \ - meson-g12a-u200.dtb \ - meson-g12b-a311d-bananapi-m2s.dtb \ - meson-g12b-a311d-khadas-vim3.dtb \ - meson-g12b-bananapi-cm4-cm4io.dtb \ - meson-g12b-gsking-x.dtb \ - meson-g12b-gtking.dtb \ - meson-g12b-gtking-pro.dtb \ - meson-g12b-odroid-go-ultra.dtb \ - meson-g12b-odroid-n2.dtb \ - meson-g12b-odroid-n2l.dtb \ - meson-g12b-odroid-n2-plus.dtb \ - meson-g12b-radxa-zero2.dtb \ - meson-sm1-bananapi-m2-pro.dtb \ - meson-sm1-bananapi-m5.dtb \ - meson-sm1-khadas-vim3l.dtb \ - meson-sm1-odroid-c4.dtb \ - meson-sm1-odroid-hc4.dtb \ - meson-sm1-sei610.dtb + meson-a1-ad401.dtb + dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/dts/kirkwood-6192.dtsi b/arch/arm/dts/kirkwood-6192.dtsi deleted file mode 100644 index 396bcba08ad..00000000000 --- a/arch/arm/dts/kirkwood-6192.dtsi +++ /dev/null @@ -1,88 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - mbus@f1000000 { - pciec: pcie@82000000 { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - - pcie0: pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 - 0x81000000 0 0 0x81000000 0x1 0 1 0>; - bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - compatible = "marvell,88f6192-pinctrl"; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp5", "mpp21", "mpp23"; - marvell,function = "sata0"; - }; - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp4", "mpp20", "mpp22"; - marvell,function = "sata1"; - }; - pmx_sdio: pmx-sdio { - marvell,pins = "mpp12", "mpp13", "mpp14", - "mpp15", "mpp16", "mpp17"; - marvell,function = "sdio"; - }; - }; - - rtc: rtc@10300 { - compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <53>; - clocks = <&gate_clk 7>; - }; - - sata: sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <21>; - clocks = <&gate_clk 14>, <&gate_clk 15>; - clock-names = "0", "1"; - phys = <&sata_phy0>, <&sata_phy1>; - phy-names = "port0", "port1"; - status = "disabled"; - }; - - sdio: mvsdio@90000 { - compatible = "marvell,orion-sdio"; - reg = <0x90000 0x200>; - interrupts = <28>; - clocks = <&gate_clk 4>; - bus-width = <4>; - cap-sdio-irq; - cap-sd-highspeed; - cap-mmc-highspeed; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-6281.dtsi b/arch/arm/dts/kirkwood-6281.dtsi deleted file mode 100644 index faa05849a40..00000000000 --- a/arch/arm/dts/kirkwood-6281.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - mbus@f1000000 { - pciec: pcie@82000000 { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - - pcie0: pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 - 0x81000000 0 0 0x81000000 0x1 0 1 0>; - bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - compatible = "marvell,88f6281-pinctrl"; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp5", "mpp21", "mpp23"; - marvell,function = "sata0"; - }; - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp4", "mpp20", "mpp22"; - marvell,function = "sata1"; - }; - pmx_sdio: pmx-sdio { - marvell,pins = "mpp12", "mpp13", "mpp14", - "mpp15", "mpp16", "mpp17"; - marvell,function = "sdio"; - }; - }; - - rtc: rtc@10300 { - compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <53>; - clocks = <&gate_clk 7>; - }; - - sata: sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <21>; - clocks = <&gate_clk 14>, <&gate_clk 15>; - clock-names = "0", "1"; - phys = <&sata_phy0>, <&sata_phy1>; - phy-names = "port0", "port1"; - status = "disabled"; - }; - - sdio: mvsdio@90000 { - compatible = "marvell,orion-sdio"; - reg = <0x90000 0x200>; - interrupts = <28>; - clocks = <&gate_clk 4>; - pinctrl-0 = <&pmx_sdio>; - pinctrl-names = "default"; - bus-width = <4>; - cap-sdio-irq; - cap-sd-highspeed; - cap-mmc-highspeed; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-6282.dtsi b/arch/arm/dts/kirkwood-6282.dtsi deleted file mode 100644 index e732c501ea8..00000000000 --- a/arch/arm/dts/kirkwood-6282.dtsi +++ /dev/null @@ -1,161 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - mbus@f1000000 { - pciec: pcie@82000000 { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 - 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 - 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ - 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ - 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; - - pcie0: pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 - 0x81000000 0 0 0x81000000 0x1 0 1 0>; - bus-range = <0x00 0xff>; - interrupt-names = "intx", "error"; - interrupts = <9>, <44>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie0_intc 0>, - <0 0 0 2 &pcie0_intc 1>, - <0 0 0 3 &pcie0_intc 2>, - <0 0 0 4 &pcie0_intc 3>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - - pcie0_intc: interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - pcie1: pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 - 0x81000000 0 0 0x81000000 0x2 0 1 0>; - bus-range = <0x00 0xff>; - interrupt-names = "intx", "error"; - interrupts = <10>, <45>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie1_intc 0>, - <0 0 0 2 &pcie1_intc 1>, - <0 0 0 3 &pcie1_intc 2>, - <0 0 0 4 &pcie1_intc 3>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 18>; - status = "disabled"; - - pcie1_intc: interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - }; - }; - ocp@f1000000 { - - pinctrl: pin-controller@10000 { - compatible = "marvell,88f6282-pinctrl"; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp5", "mpp21", "mpp23"; - marvell,function = "sata0"; - }; - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp4", "mpp20", "mpp22"; - marvell,function = "sata1"; - }; - - /* - * Default I2C1 pinctrl setting on mpp36/mpp37, - * overwrite marvell,pins on board level if required. - */ - pmx_twsi1: pmx-twsi1 { - marvell,pins = "mpp36", "mpp37"; - marvell,function = "twsi1"; - }; - - pmx_sdio: pmx-sdio { - marvell,pins = "mpp12", "mpp13", "mpp14", - "mpp15", "mpp16", "mpp17"; - marvell,function = "sdio"; - }; - }; - - thermal: thermal@10078 { - compatible = "marvell,kirkwood-thermal"; - reg = <0x10078 0x4>; - status = "okay"; - }; - - rtc: rtc@10300 { - compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <53>; - clocks = <&gate_clk 7>; - }; - - i2c1: i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <32>; - clock-frequency = <100000>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_twsi1>; - pinctrl-names = "default"; - status = "disabled"; - }; - - sata: sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <21>; - clocks = <&gate_clk 14>, <&gate_clk 15>; - clock-names = "0", "1"; - phys = <&sata_phy0>, <&sata_phy1>; - phy-names = "port0", "port1"; - status = "disabled"; - }; - - sdio: mvsdio@90000 { - compatible = "marvell,orion-sdio"; - reg = <0x90000 0x200>; - interrupts = <28>; - clocks = <&gate_clk 4>; - pinctrl-0 = <&pmx_sdio>; - pinctrl-names = "default"; - bus-width = <4>; - cap-sdio-irq; - cap-sd-highspeed; - cap-mmc-highspeed; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-98dx4122.dtsi b/arch/arm/dts/kirkwood-98dx4122.dtsi deleted file mode 100644 index 299c147298c..00000000000 --- a/arch/arm/dts/kirkwood-98dx4122.dtsi +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - mbus@f1000000 { - pciec: pcie@82000000 { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - - pcie0: pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 - 0x81000000 0 0 0x81000000 0x1 0 1 0>; - bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - compatible = "marvell,98dx4122-pinctrl"; - - }; - }; -}; - -&sata_phy0 { - status = "disabled"; -}; - -&sata_phy1 { - status = "disabled"; -}; diff --git a/arch/arm/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/dts/kirkwood-blackarmor-nas220.dts deleted file mode 100644 index 07fbfca444d..00000000000 --- a/arch/arm/dts/kirkwood-blackarmor-nas220.dts +++ /dev/null @@ -1,172 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Device Tree file for Seagate Blackarmor NAS220 - * - * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include "kirkwood.dtsi" -#include "kirkwood-6192.dtsi" - -/ { - model = "Seagate Blackarmor NAS220"; - compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192", - "marvell,kirkwood"; - - memory { /* 128 MB */ - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - gpio_keys { - compatible = "gpio-keys"; - - reset { - label = "Reset"; - linux,code = <KEY_POWER>; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - - button { - label = "Power"; - linux,code = <KEY_SLEEP>; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - blue-power { - label = "nas220:blue:power"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>; - pinctrl-names = "default"; - - sata0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "SATA0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - - sata1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "SATA1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 28 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* - * Serial port routed to connector CN5 - * - * pin 1 - TX (CPU's TX) - * pin 4 - RX (CPU's RX) - * pin 6 - GND - */ -&uart0 { - status = "okay"; -}; - -&pinctrl { - pinctrl-0 = <&pmx_button_reset &pmx_button_power>; - pinctrl-names = "default"; - - pmx_act_sata0: pmx-act-sata0 { - marvell,pins = "mpp15"; - marvell,function = "sata0"; - }; - - pmx_act_sata1: pmx-act-sata1 { - marvell,pins = "mpp16"; - marvell,function = "sata1"; - }; - - pmx_power_sata0: pmx-power-sata0 { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - pmx_power_sata1: pmx-power-sata1 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_button_reset: pmx-button-reset { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_button_power: pmx-button-power { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; -}; - -&sata { - status = "okay"; - nr-ports = <2>; -}; - -&i2c0 { - status = "okay"; - - adt7476: thermal@2e { - compatible = "adi,adt7476"; - reg = <0x2e>; - }; -}; - -&nand { - status = "okay"; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-d2net.dts b/arch/arm/dts/kirkwood-d2net.dts deleted file mode 100644 index bd3b266dd76..00000000000 --- a/arch/arm/dts/kirkwood-d2net.dts +++ /dev/null @@ -1,45 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree file for d2 Network v2 - * - * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org> - * -*/ - -/dts-v1/; - -#include <dt-bindings/leds/leds-ns2.h> -#include "kirkwood-netxbig.dtsi" - -/ { - model = "LaCie d2 Network v2"; - compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - ns2-leds { - compatible = "lacie,ns2-leds"; - - blue-sata { - label = "d2net_v2:blue:sata"; - slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; - modes-map = <NS_V2_LED_OFF 1 0 - NS_V2_LED_ON 0 1 - NS_V2_LED_ON 1 1 - NS_V2_LED_SATA 0 0>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - red-fail { - label = "d2net_v2:red:fail"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-dns325.dts b/arch/arm/dts/kirkwood-dns325.dts deleted file mode 100644 index 94d9c06cbbf..00000000000 --- a/arch/arm/dts/kirkwood-dns325.dts +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood-dnskw.dtsi" - -/ { - model = "D-Link DNS-325 NAS (Rev A1)"; - compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325 - &pmx_led_red_left_hdd &pmx_led_red_right_hdd - &pmx_led_white_usb>; - pinctrl-names = "default"; - - white-power { - label = "dns325:white:power"; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - white-usb { - label = "dns325:white:usb"; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */ - }; - red-l_hdd { - label = "dns325:red:l_hdd"; - gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; - }; - red-r_hdd { - label = "dns325:red:r_hdd"; - gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; - }; - red-usb { - label = "dns325:red:usb"; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; - - ocp@f1000000 { - i2c@11000 { - status = "okay"; - - lm75: lm75@48 { - compatible = "national,lm75"; - reg = <0x48>; - }; - }; - serial@12000 { - status = "okay"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-dnskw.dtsi b/arch/arm/dts/kirkwood-dnskw.dtsi deleted file mode 100644 index cbaf06f2f78..00000000000 --- a/arch/arm/dts/kirkwood-dnskw.dtsi +++ /dev/null @@ -1,235 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "D-Link DNS NASes (kirkwood-based)"; - compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_power &pmx_button_unmount - &pmx_button_reset>; - pinctrl-names = "default"; - - power { - label = "Power button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - }; - eject { - label = "USB unmount button"; - linux,code = <KEY_EJECTCD>; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - reset { - label = "Reset button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_fan { - /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; - pinctrl-names = "default"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW - &gpio1 13 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 0 - 3000 1 - 6000 2>; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_power_off>; - pinctrl-names = "default"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - - pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0 - &pmx_present_sata1 &pmx_fan_tacho - &pmx_temp_alarm>; - pinctrl-names = "default"; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp20"; - marvell,function = "sata1"; - }; - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp21"; - marvell,function = "sata0"; - }; - pmx_led_power: pmx-led-power { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; - pmx_led_red_right_hdd: pmx-led-red-right-hdd { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - pmx_led_red_left_hdd: pmx-led-red-left-hdd { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - pmx_led_red_usb_325: pmx-led-red-usb-325 { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_button_power: pmx-button-power { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - pmx_led_red_usb_320: pmx-led-red-usb-320 { - marvell,pins = "mpp35"; - marvell,function = "gpio"; - }; - pmx_power_off: pmx-power-off { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - pmx_power_back_on: pmx-power-back-on { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_power_sata0: pmx-power-sata0 { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_power_sata1: pmx-power-sata1 { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_present_sata0: pmx-present-sata0 { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_present_sata1: pmx-present-sata1 { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_led_white_usb: pmx-led-white-usb { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_fan_tacho: pmx-fan-tacho { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - pmx_fan_high_speed: pmx-fan-high-speed { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - pmx_fan_low_speed: pmx-fan-low-speed { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_button_unmount: pmx-button-unmount { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_button_reset: pmx-button-reset { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - pmx_temp_alarm: pmx-temp-alarm { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - }; - sata@80000 { - pinctrl-0 = <&pmx_sata0 &pmx_sata1>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <2>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>; - pinctrl-names = "default"; - - sata0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "SATA0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 7 0>; - }; - sata1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "SATA1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 8 0>; - }; - }; -}; - -&nand { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-dockstar.dts b/arch/arm/dts/kirkwood-dockstar.dts deleted file mode 100644 index 6a3f1bf6d9f..00000000000 --- a/arch/arm/dts/kirkwood-dockstar.dts +++ /dev/null @@ -1,110 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Seagate FreeAgent Dockstar"; - compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_led_green: pmx-led-green { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_orange: pmx-led-orange { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "ok"; - }; - }; - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_green &pmx_led_orange>; - pinctrl-names = "default"; - - health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 0>; - }; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "data"; - reg = <0x0500000 0xfb00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - compatible = "marvell,88e1116"; - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-dreamplug-u-boot.dtsi b/arch/arm/dts/kirkwood-dreamplug-u-boot.dtsi new file mode 100644 index 00000000000..59f19a211fa --- /dev/null +++ b/arch/arm/dts/kirkwood-dreamplug-u-boot.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/ { + aliases { + spi0 = &spi0; + }; +}; diff --git a/arch/arm/dts/kirkwood-dreamplug.dts b/arch/arm/dts/kirkwood-dreamplug.dts deleted file mode 100644 index e9eea22fc93..00000000000 --- a/arch/arm/dts/kirkwood-dreamplug.dts +++ /dev/null @@ -1,131 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Globalscale Technologies Dreamplug"; - compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - aliases { - spi0 = &spi0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_led_bluetooth: pmx-led-bluetooth { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_led_wifi: pmx-led-wifi { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - pmx_led_wifi_ap: pmx-led-wifi-ap { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "ok"; - }; - - spi@10600 { - status = "okay"; - - m25p40@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x80000>; - label = "u-boot"; - }; - - partition@100000 { - reg = <0x100000 0x10000>; - label = "u-boot env"; - }; - - partition@180000 { - reg = <0x180000 0x10000>; - label = "dtb"; - }; - }; - }; - - sata@80000 { - status = "okay"; - nr-ports = <1>; - }; - - mvsdio@90000 { - pinctrl-0 = <&pmx_sdio>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi - &pmx_led_wifi_ap >; - pinctrl-names = "default"; - - bluetooth { - label = "dreamplug:blue:bluetooth"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - wifi { - label = "dreamplug:green:wifi"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - wifi-ap { - label = "dreamplug:green:wifi_ap"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/dts/kirkwood-ds109.dts b/arch/arm/dts/kirkwood-ds109.dts deleted file mode 100644 index 29982e7acb7..00000000000 --- a/arch/arm/dts/kirkwood-ds109.dts +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Andrew Lunn <andrew@lunn.ch> - * Ben Peddell <klightspeed@killerwolves.net> - * - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" -#include "kirkwood-synology.dtsi" - -/ { - model = "Synology DS109, DS110, DS110jv20"; - compatible = "synology,ds109", "synology,ds110jv20", - "synology,ds110", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - gpio-fan-150-32-35 { - status = "okay"; - }; - - gpio-leds-hdd-21-1 { - status = "okay"; - }; -}; - -&rs5c372 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-goflexnet.dts b/arch/arm/dts/kirkwood-goflexnet.dts deleted file mode 100644 index 02d87e0a106..00000000000 --- a/arch/arm/dts/kirkwood-goflexnet.dts +++ /dev/null @@ -1,190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Seagate GoFlex Net"; - compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_0: pmx-led_right_cap_0 { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_1: pmx-led_right_cap_1 { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_2: pmx-led_right_cap_2 { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_3: pmx-led_right_cap_3 { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_0: pmx-led_left_cap_0 { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_1: pmx-led_left_cap_1 { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_2: pmx-led_left_cap_2 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_3: pmx-led_left_cap_3 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - pmx_led_green: pmx-led_green { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_orange: pmx-led_orange { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "ok"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - }; - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = < &pmx_led_orange - &pmx_led_left_cap_0 &pmx_led_left_cap_1 - &pmx_led_left_cap_2 &pmx_led_left_cap_3 - &pmx_led_right_cap_0 &pmx_led_right_cap_1 - &pmx_led_right_cap_2 &pmx_led_right_cap_3 - >; - pinctrl-names = "default"; - - health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - left0 { - label = "status:white:left0"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - }; - left1 { - label = "status:white:left1"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - left2 { - label = "status:white:left2"; - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - left3 { - label = "status:white:left3"; - gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - right0 { - label = "status:white:right0"; - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - }; - right1 { - label = "status:white:right1"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - right2 { - label = "status:white:right2"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - right3 { - label = "status:white:right3"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&nand { - chip-delay = <40>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "pogoplug"; - reg = <0x0500000 0x2000000>; - }; - - partition@2500000 { - label = "root"; - reg = <0x02500000 0xd800000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/dts/kirkwood-guruplug-server-plus.dts deleted file mode 100644 index ff1260ee3fe..00000000000 --- a/arch/arm/dts/kirkwood-guruplug-server-plus.dts +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Globalscale Technologies Guruplug Server Plus"; - compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_led_health_r: pmx-led-health-r { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_health_g: pmx-led-health-g { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_led_wmode_r: pmx-led-wmode-r { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - pmx_led_wmode_g: pmx-led-wmode-g { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "ok"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <1>; - }; - - /* AzureWave AW-GH381 WiFi/BT */ - mvsdio@90000 { - status = "okay"; - non-removable; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g - &pmx_led_wmode_r &pmx_led_wmode_g >; - pinctrl-names = "default"; - - health-r { - label = "guruplug:red:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - health-g { - label = "guruplug:green:health"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - wmode-r { - label = "guruplug:red:wmode"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - wmode-g { - label = "guruplug:green:wmode"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x00100000 0x00400000>; - }; - - partition@500000 { - label = "data"; - reg = <0x00500000 0x1fb00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - /* Marvell 88E1121R */ - compatible = "ethernet-phy-id0141.0cb0", - "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - - ethphy1: ethernet-phy@1 { - /* Marvell 88E1121R */ - compatible = "ethernet-phy-id0141.0cb0", - "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; - phy-connection-type = "rgmii-id"; - }; -}; diff --git a/arch/arm/dts/kirkwood-ib62x0.dts b/arch/arm/dts/kirkwood-ib62x0.dts deleted file mode 100644 index 962a910a6f5..00000000000 --- a/arch/arm/dts/kirkwood-ib62x0.dts +++ /dev/null @@ -1,146 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; - compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_led_os_red: pmx-led-os-red { - marvell,pins = "mpp22"; - marvell,function = "gpio"; - }; - pmx_power_off: pmx-power-off { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - pmx_led_os_green: pmx-led-os-green { - marvell,pins = "mpp25"; - marvell,function = "gpio"; - }; - pmx_led_usb_transfer: pmx-led-usb-transfer { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - pmx_button_reset: pmx-button-reset { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - pmx_button_usb_copy: pmx-button-usb-copy { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>; - pinctrl-names = "default"; - - copy { - label = "USB Copy"; - linux,code = <KEY_COPY>; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - reset { - label = "Reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green - &pmx_led_usb_transfer>; - pinctrl-names = "default"; - - green-os { - label = "ib62x0:green:os"; - gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - red-os { - label = "ib62x0:red:os"; - gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; - }; - usb-copy { - label = "ib62x0:red:usb_copy"; - gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_power_off>; - pinctrl-names = "default"; - gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0xe0000>; - }; - - partition@e0000 { - label = "u-boot environment"; - reg = <0xe0000 0x20000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x600000>; - }; - - partition@700000 { - label = "root"; - reg = <0x0700000 0xf900000>; - }; - -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-iconnect.dts b/arch/arm/dts/kirkwood-iconnect.dts deleted file mode 100644 index 4a512d80912..00000000000 --- a/arch/arm/dts/kirkwood-iconnect.dts +++ /dev/null @@ -1,195 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Iomega Iconnect"; - compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - linux,initrd-start = <0x4500040>; - linux,initrd-end = <0x4800000>; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_button_reset: pmx-button-reset { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - pmx_button_otb: pmx-button-otb { - marvell,pins = "mpp35"; - marvell,function = "gpio"; - }; - pmx_led_level: pmx-led-level { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_led_power_blue: pmx-led-power-blue { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_led_power_red: pmx-power-red { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_led_usb1: pmx-led-usb1 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - pmx_led_usb2: pmx-led-usb2 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - pmx_led_usb3: pmx-led-usb3 { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_usb4: pmx-led-usb4 { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_led_otb: pmx-led-otb { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - }; - i2c@11000 { - status = "okay"; - - lm63: lm63@4c { - compatible = "national,lm63"; - reg = <0x4c>; - }; - }; - serial@12000 { - status = "ok"; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = < &pmx_led_level &pmx_led_power_blue - &pmx_led_power_red &pmx_led_usb1 - &pmx_led_usb2 &pmx_led_usb3 - &pmx_led_usb4 &pmx_led_otb >; - pinctrl-names = "default"; - - led-level { - label = "led_level"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - power-blue { - label = "power:blue"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - power-red { - label = "power:red"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - usb1 { - label = "usb1:blue"; - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - usb2 { - label = "usb2:blue"; - gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - usb3 { - label = "usb3:blue"; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - usb4 { - label = "usb4:blue"; - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - otb { - label = "otb:blue"; - gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = < &pmx_button_reset &pmx_button_otb >; - pinctrl-names = "default"; - - otb { - label = "OTB Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - debounce-interval = <100>; - }; - reset { - label = "Reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - debounce-interval = <100>; - }; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0xc0000>; - }; - - partition@a0000 { - label = "env"; - reg = <0xa0000 0x20000>; - }; - - partition@100000 { - label = "zImage"; - reg = <0x100000 0x300000>; - }; - - partition@540000 { - label = "initrd"; - reg = <0x540000 0x300000>; - }; - - partition@980000 { - label = "boot"; - reg = <0x980000 0x1f400000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@11 { - reg = <11>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-is2.dts b/arch/arm/dts/kirkwood-is2.dts deleted file mode 100644 index 1bc16a5cdba..00000000000 --- a/arch/arm/dts/kirkwood-is2.dts +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/leds/leds-ns2.h> -#include "kirkwood-ns2-common.dtsi" - -/ { - model = "LaCie Internet Space v2"; - compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - ocp@f1000000 { - sata@80000 { - pinctrl-0 = <&pmx_ns2_sata0>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <1>; - }; - }; - - ns2-leds { - compatible = "lacie,ns2-leds"; - - blue-sata { - label = "ns2:blue:sata"; - slow-gpio = <&gpio0 29 0>; - cmd-gpio = <&gpio0 30 0>; - modes-map = <NS_V2_LED_OFF 1 0 - NS_V2_LED_ON 0 1 - NS_V2_LED_ON 1 1 - NS_V2_LED_SATA 0 0>; - }; - }; -}; - -ðphy0 { reg = <8>; }; diff --git a/arch/arm/dts/kirkwood-lschlv2-u-boot.dtsi b/arch/arm/dts/kirkwood-lschlv2-u-boot.dtsi index 7fc2d7d3b41..cf33ff822ee 100644 --- a/arch/arm/dts/kirkwood-lschlv2-u-boot.dtsi +++ b/arch/arm/dts/kirkwood-lschlv2-u-boot.dtsi @@ -1,7 +1,9 @@ // SPDX-License-Identifier: GPL-2.0+ -ð0 { - status = "disabled"; +/ { + aliases { + spi0 = &spi0; + }; }; &hdd_power { diff --git a/arch/arm/dts/kirkwood-lschlv2.dts b/arch/arm/dts/kirkwood-lschlv2.dts deleted file mode 100644 index 1d737d903f5..00000000000 --- a/arch/arm/dts/kirkwood-lschlv2.dts +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood-lsxl.dtsi" - -/ { - model = "Buffalo Linkstation LS-CHLv2"; - compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x4000000>; - }; - - ocp@f1000000 { - serial@12000 { - status = "okay"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-lsxhl-u-boot.dtsi b/arch/arm/dts/kirkwood-lsxhl-u-boot.dtsi index 7fc2d7d3b41..cf33ff822ee 100644 --- a/arch/arm/dts/kirkwood-lsxhl-u-boot.dtsi +++ b/arch/arm/dts/kirkwood-lsxhl-u-boot.dtsi @@ -1,7 +1,9 @@ // SPDX-License-Identifier: GPL-2.0+ -ð0 { - status = "disabled"; +/ { + aliases { + spi0 = &spi0; + }; }; &hdd_power { diff --git a/arch/arm/dts/kirkwood-lsxhl.dts b/arch/arm/dts/kirkwood-lsxhl.dts deleted file mode 100644 index a56e0d79777..00000000000 --- a/arch/arm/dts/kirkwood-lsxhl.dts +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood-lsxl.dtsi" - -/ { - model = "Buffalo Linkstation LS-XHL"; - compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - ocp@f1000000 { - serial@12000 { - status = "okay"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-lsxl.dtsi b/arch/arm/dts/kirkwood-lsxl.dtsi deleted file mode 100644 index c99c0da0937..00000000000 --- a/arch/arm/dts/kirkwood-lsxl.dtsi +++ /dev/null @@ -1,241 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - aliases { - spi0 = &spi0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_power_hdd: pmx-power-hdd { - marvell,pins = "mpp10"; - marvell,function = "gpo"; - }; - pmx_usb_vbus: pmx-usb-vbus { - marvell,pins = "mpp11"; - marvell,function = "gpio"; - }; - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp18"; - marvell,function = "gpo"; - }; - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp19"; - marvell,function = "gpo"; - }; - pmx_led_function_blue: pmx-led-function-blue { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - pmx_led_alarm: pmx-led-alarm { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_led_info: pmx-led-info { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_power: pmx-led-power { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_button_function: pmx-button-function { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_power_auto_switch: pmx-power-auto-switch { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_led_function_red: pmx-led-function_red { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - - }; - sata@80000 { - status = "okay"; - nr-ports = <1>; - }; - - spi@10600 { - status = "okay"; - - m25p40@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p40", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x60000>; - label = "uboot"; - read-only; - }; - - partition@60000 { - reg = <0x60000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@70000 { - reg = <0x70000 0x10000>; - label = "uboot_env"; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_function &pmx_power_switch - &pmx_power_auto_switch>; - pinctrl-names = "default"; - - option { - label = "Function Button"; - linux,code = <KEY_OPTION>; - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - }; - reserved { - label = "Power-on Switch"; - linux,code = <KEY_RESERVED>; - linux,input-type = <5>; - gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; - }; - power { - label = "Power-auto Switch"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm - &pmx_led_info &pmx_led_power - &pmx_led_function_blue>; - pinctrl-names = "default"; - - func_blue { - label = "lsxl:blue:func"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - alarm { - label = "lsxl:red:alarm"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - - info { - label = "lsxl:amber:info"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - power { - label = "lsxl:blue:power"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - func_red { - label = "lsxl:red:func"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - gpios = <&gpio0 19 GPIO_ACTIVE_LOW - &gpio0 18 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - - restart_poweroff { - compatible = "restart-poweroff"; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 11 0>; - }; - hdd_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 10 0>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - - ethphy1: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/dts/kirkwood-net2big.dts b/arch/arm/dts/kirkwood-net2big.dts deleted file mode 100644 index 3e3ac289e5b..00000000000 --- a/arch/arm/dts/kirkwood-net2big.dts +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree file for LaCie 2Big Network v2 - * - * Copyright (C) 2014 - * - * Andrew Lunn <andrew@lunn.ch> - * - * Based on netxbig_v2-setup.c, - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * -*/ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" -#include "kirkwood-netxbig.dtsi" - -/ { - model = "LaCie 2Big Network v2"; - compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - fan { - compatible = "gpio-fan"; - alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - }; -}; - -®ulators { - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdd1power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; - }; - - clocks { - g762_clk: g762-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; -}; - -&i2c0 { - g762@3e { - compatible = "gmt,g762"; - reg = <0x3e>; - clocks = <&g762_clk>; - }; -}; diff --git a/arch/arm/dts/kirkwood-netxbig.dtsi b/arch/arm/dts/kirkwood-netxbig.dtsi deleted file mode 100644 index b5737026e24..00000000000 --- a/arch/arm/dts/kirkwood-netxbig.dtsi +++ /dev/null @@ -1,232 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree common file for LaCie 2Big and 5Big Network v2 - * - * Copyright (C) 2014 - * - * Andrew Lunn <andrew@lunn.ch> - * - * Based on netxbig_v2-setup.c, - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * -*/ - -#include <dt-bindings/leds/leds-netxbig.h> -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - serial@12000 { - status = "okay"; - }; - - spi@10600 { - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x80000>; - label = "u-boot"; - }; - }; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - /* - * esc and power represent a three position rocker - * switch. Thus the conventional KEY_POWER does not fit - */ - exc { - label = "Back power switch (on|auto)"; - linux,code = <KEY_ESC>; - linux,input-type = <5>; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - }; - power { - label = "Back power switch (auto|off)"; - linux,code = <KEY_1>; - linux,input-type = <5>; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - option { - label = "Function button"; - linux,code = <KEY_OPTION>; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - }; - - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - }; - - regulators: regulators { - status = "okay"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd0power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; - }; - }; - - netxbig_gpio_ext: netxbig-gpio-ext { - compatible = "lacie,netxbig-gpio-ext"; - - addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH - &gpio1 16 GPIO_ACTIVE_HIGH - &gpio1 17 GPIO_ACTIVE_HIGH>; - data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH - &gpio1 13 GPIO_ACTIVE_HIGH - &gpio1 14 GPIO_ACTIVE_HIGH>; - enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - - netxbig-leds { - compatible = "lacie,netxbig-leds"; - - gpio-ext = <&netxbig_gpio_ext>; - - timers = <NETXBIG_LED_TIMER1 500 500 - NETXBIG_LED_TIMER2 500 1000>; - - blue-power { - label = "netxbig:blue:power"; - mode-addr = <0>; - mode-val = <NETXBIG_LED_OFF 0 - NETXBIG_LED_ON 1 - NETXBIG_LED_TIMER1 3 - NETXBIG_LED_TIMER2 7>; - bright-addr = <1>; - max-brightness = <7>; - }; - red-power { - label = "netxbig:red:power"; - mode-addr = <0>; - mode-val = <NETXBIG_LED_OFF 0 - NETXBIG_LED_ON 2 - NETXBIG_LED_TIMER1 4>; - bright-addr = <1>; - max-brightness = <7>; - }; - blue-sata0 { - label = "netxbig:blue:sata0"; - mode-addr = <3>; - mode-val = <NETXBIG_LED_OFF 0 - NETXBIG_LED_ON 7 - NETXBIG_LED_SATA 1 - NETXBIG_LED_TIMER1 3>; - bright-addr = <2>; - max-brightness = <7>; - }; - red-sata0 { - label = "netxbig:red:sata0"; - mode-addr = <3>; - mode-val = <NETXBIG_LED_OFF 0 - NETXBIG_LED_ON 2 - NETXBIG_LED_TIMER1 4>; - bright-addr = <2>; - max-brightness = <7>; - }; - blue-sata1 { - label = "netxbig:blue:sata1"; - mode-addr = <4>; - mode-val = <NETXBIG_LED_OFF 0 - NETXBIG_LED_ON 7 - NETXBIG_LED_SATA 1 - NETXBIG_LED_TIMER1 3>; - bright-addr = <2>; - max-brightness = <7>; - }; - red-sata1 { - label = "netxbig:red:sata1"; - mode-addr = <4>; - mode-val = <NETXBIG_LED_OFF 0 - NETXBIG_LED_ON 2 - NETXBIG_LED_TIMER1 4>; - bright-addr = <2>; - max-brightness = <7>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <8>; - }; - - ethphy1: ethernet-phy@1 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -&pinctrl { - pinctrl-names = "default"; - - pmx_button_function: pmx-button-function { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - pmx_button_power_off: pmx-button-power-off { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - pmx_button_power_on: pmx-button-power-on { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; -}; - -&i2c0 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c04"; - pagesize = <16>; - reg = <0x50>; - }; -}; diff --git a/arch/arm/dts/kirkwood-ns2-common.dtsi b/arch/arm/dts/kirkwood-ns2-common.dtsi deleted file mode 100644 index 51530ea8662..00000000000 --- a/arch/arm/dts/kirkwood-ns2-common.dtsi +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_ns2_sata0: pmx-ns2-sata0 { - marvell,pins = "mpp21"; - marvell,function = "sata0"; - }; - pmx_ns2_sata1: pmx-ns2-sata1 { - marvell,pins = "mpp20"; - marvell,function = "sata1"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - spi@10600 { - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x80000>; - label = "u-boot"; - }; - }; - }; - - i2c@11000 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c04"; - pagesize = <16>; - reg = <0x50>; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - power { - label = "Power push button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - red-fail { - label = "ns2:red:fail"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; - }; - -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@X { - /* overwrite reg property in board file */ - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-ns2.dts b/arch/arm/dts/kirkwood-ns2.dts deleted file mode 100644 index 7b67083e1ec..00000000000 --- a/arch/arm/dts/kirkwood-ns2.dts +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/leds/leds-ns2.h> -#include "kirkwood-ns2-common.dtsi" - -/ { - model = "LaCie Network Space v2"; - compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - ocp@f1000000 { - sata@80000 { - pinctrl-0 = <&pmx_ns2_sata0>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <1>; - }; - }; - - ns2-leds { - compatible = "lacie,ns2-leds"; - - blue-sata { - label = "ns2:blue:sata"; - slow-gpio = <&gpio0 29 0>; - cmd-gpio = <&gpio0 30 0>; - modes-map = <NS_V2_LED_OFF 1 0 - NS_V2_LED_ON 0 1 - NS_V2_LED_ON 1 1 - NS_V2_LED_SATA 0 0>; - }; - }; -}; - -ðphy0 { reg = <8>; }; diff --git a/arch/arm/dts/kirkwood-ns2lite.dts b/arch/arm/dts/kirkwood-ns2lite.dts deleted file mode 100644 index b0cb5907ed6..00000000000 --- a/arch/arm/dts/kirkwood-ns2lite.dts +++ /dev/null @@ -1,35 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood-ns2-common.dtsi" - -/ { - model = "LaCie Network Space Lite v2"; - compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - ocp@f1000000 { - sata@80000 { - pinctrl-0 = <&pmx_ns2_sata0>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <1>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - blue-sata { - label = "ns2:blue:sata"; - gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; - linux,default-trigger = "disk-activity"; - }; - }; -}; - -ðphy0 { reg = <0>; }; diff --git a/arch/arm/dts/kirkwood-ns2max.dts b/arch/arm/dts/kirkwood-ns2max.dts deleted file mode 100644 index c0a087e7740..00000000000 --- a/arch/arm/dts/kirkwood-ns2max.dts +++ /dev/null @@ -1,59 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/leds/leds-ns2.h> -#include "kirkwood-ns2-common.dtsi" - -/ { - model = "LaCie Network Space Max v2"; - compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - ocp@f1000000 { - sata@80000 { - pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <2>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW - &gpio0 7 GPIO_ACTIVE_LOW - &gpio1 1 GPIO_ACTIVE_LOW - &gpio0 23 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = - < 0 0 - 1500 15 - 1700 14 - 1800 13 - 2100 12 - 3100 11 - 3300 10 - 4300 9 - 5500 8>; - alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - }; - - ns2-leds { - compatible = "lacie,ns2-leds"; - - blue-sata { - label = "ns2:blue:sata"; - slow-gpio = <&gpio0 29 0>; - cmd-gpio = <&gpio0 30 0>; - modes-map = <NS_V2_LED_OFF 1 0 - NS_V2_LED_ON 0 1 - NS_V2_LED_ON 1 1 - NS_V2_LED_SATA 0 0>; - }; - }; -}; - -ðphy0 { reg = <8>; }; diff --git a/arch/arm/dts/kirkwood-ns2mini.dts b/arch/arm/dts/kirkwood-ns2mini.dts deleted file mode 100644 index 5b9fa14b642..00000000000 --- a/arch/arm/dts/kirkwood-ns2mini.dts +++ /dev/null @@ -1,60 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/leds/leds-ns2.h> -#include "kirkwood-ns2-common.dtsi" - -/ { - /* This machine is embedded in the first LaCie CloudBox product. */ - model = "LaCie Network Space Mini v2"; - compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - ocp@f1000000 { - sata@80000 { - pinctrl-0 = <&pmx_ns2_sata0>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <1>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW - &gpio0 7 GPIO_ACTIVE_LOW - &gpio1 1 GPIO_ACTIVE_LOW - &gpio0 23 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = - < 0 0 - 3000 15 - 3180 14 - 4140 13 - 4570 12 - 6760 11 - 7140 10 - 7980 9 - 9200 8>; - alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - }; - - ns2-leds { - compatible = "lacie,ns2-leds"; - - blue-sata { - label = "ns2:blue:sata"; - slow-gpio = <&gpio0 29 0>; - cmd-gpio = <&gpio0 30 0>; - modes-map = <NS_V2_LED_OFF 1 0 - NS_V2_LED_ON 0 1 - NS_V2_LED_ON 1 1 - NS_V2_LED_SATA 0 0>; - }; - }; -}; - -ðphy0 { reg = <0>; }; diff --git a/arch/arm/dts/kirkwood-nsa310s.dts b/arch/arm/dts/kirkwood-nsa310s.dts deleted file mode 100644 index 09ee76c2a2e..00000000000 --- a/arch/arm/dts/kirkwood-nsa310s.dts +++ /dev/null @@ -1,319 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree file for the Zyxel NSA 310S NAS box. - * - * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com> - * - * Based on - * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk> - * Based upon the board setup file created by Peter Schildmann - */ -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Zyxel NSA310S"; - compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pinctrl-names = "default"; - - pmx_sata0: pmx-sata0 { - marvell,pins ; - marvell,function = "sata0"; - }; - - pmx_sata1: pmx-sata1 { - marvell,pins ; - marvell,function = "sata1"; - }; - - pmx_usb_power: pmx-usb-power { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_pwr_off: pmx-pwr-off { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp25"; - marvell,function = "gpio"; - }; - - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; - - pmx_led_hdd2_green: pmx-led-hdd2-green { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - - pmx_led_hdd2_red: pmx-led-hdd2-red { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_led_usb_green: pmx-led-usb-green { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp22"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp23"; - marvell,function = "gpio"; - }; - - pmx_led_sys_green: pmx-led-sys-green { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_led_sys_orange: pmx-led-sys-orange { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_hdd1_green: pmx-led-hdd1-green { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_led_hdd1_red: pmx-led-hdd1-red { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_pwr_sata1: pmx-pwr-sata1 { - marvell,pins = "mpp33"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "ok"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <1>; - }; - - rtc@10300 { - status = "disabled"; - }; - - i2c@11000 { - status = "okay"; - ht1382: rtc@68 { - compatible = "htk,ht1382"; - reg = <0x68>; - }; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>; - - usb0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; - }; - - sata1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "SATA1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_pwr_off>; - pinctrl-names = "default"; - gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; - pinctrl-names = "default"; - - button@1 { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; - }; - button@2 { - label = "Copy Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - }; - button@3 { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red - &pmx_led_usb_green - &pmx_led_sys_green &pmx_led_sys_orange - &pmx_led_copy_green &pmx_led_copy_red - &pmx_led_hdd1_green &pmx_led_hdd1_red>; - pinctrl-names = "default"; - - green-sys { - label = "nsa310s:green:sys"; - gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - orange-sys { - label = "nsa310s:orange:sys"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - green-hdd1 { - label = "nsa310s:green:hdd1"; - gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; - }; - red-hdd1 { - label = "nsa310s:red:hdd1"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - green-hdd2 { - label = "nsa310s:green:hdd2"; - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - red-hdd2 { - label = "nsa310s:red:hdd2"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - green-usb { - label = "nsa310s:green:usb"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; - }; - green-copy { - label = "nsa310s:green:copy"; - gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ide-disk"; - }; - red-copy { - label = "nsa310s:red:copy"; - gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&nand { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x0100000>; - }; - partition@100000 { - label = "stock_uboot_env"; - reg = <0x0100000 0x0080000>; - }; - partition@180000 { - label = "key_store"; - reg = <0x0180000 0x0080000>; - }; - partition@200000 { - label = "info"; - reg = <0x0200000 0x0080000>; - }; - partition@280000 { - label = "etc"; - reg = <0x0280000 0x0a00000>; - }; - partition@c80000 { - label = "kernel_1"; - reg = <0x0c80000 0x0a00000>; - }; - partition@1680000 { - label = "rootfs1"; - reg = <0x1680000 0x2fc0000>; - }; - partition@4640000 { - label = "kernel_2"; - reg = <0x4640000 0x0a00000>; - }; - partition@5040000 { - label = "rootfs2"; - reg = <0x5040000 0x2fc0000>; - }; -}; - -&mdio { - status = "okay"; - ethphy0: ethernet-phy@1 { - compatible = "marvell,88e1510"; - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - phy-mode = "rgmii"; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-nsa325-u-boot.dtsi b/arch/arm/dts/kirkwood-nsa325-u-boot.dtsi new file mode 100644 index 00000000000..dec27b2a87a --- /dev/null +++ b/arch/arm/dts/kirkwood-nsa325-u-boot.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ + +&nand { + partition@0 { + /delete-property/ read-only; + }; +}; diff --git a/arch/arm/dts/kirkwood-nsa325.dts b/arch/arm/dts/kirkwood-nsa325.dts deleted file mode 100644 index efc57cfa41e..00000000000 --- a/arch/arm/dts/kirkwood-nsa325.dts +++ /dev/null @@ -1,231 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* Device tree file for the Zyxel NSA 325 NAS box. - * - * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com> - * - * - * Based upon the board setup file created by Peter Schildmann - */ - -/dts-v1/; - -#include "kirkwood-nsa3x0-common.dtsi" - -/ { - model = "ZyXEL NSA325"; - compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pinctrl-names = "default"; - - pmx_led_hdd2_green: pmx-led-hdd2-green { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_led_hdd2_red: pmx-led-hdd2-red { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_mcu_data: pmx-mcu-data { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_led_usb_green: pmx-led-usb-green { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_mcu_clk: pmx-mcu-clk { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_mcu_act: pmx-mcu-act { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_led_sys_green: pmx-led-sys-green { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_led_sys_orange: pmx-led-sys-orange { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_hdd1_green: pmx-led-hdd1-green { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - pmx_led_hdd1_red: pmx-led-hdd1-red { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - pmx_htp: pmx-htp { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - - /* - * Buzzer needs to be switched at around 1kHz so is - * not compatible with the gpio-beeper driver. - */ - pmx_buzzer: pmx-buzzer { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - pmx_vid_b1: pmx-vid-b1 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - - pmx_power_resume_data: pmx-power-resume-data { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - - pmx_power_resume_clk: pmx-power-resume-clk { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - - pmx_pwr_sata1: pmx-pwr-sata1 { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - - /* This board uses the pcf8563 RTC instead of the SoC RTC */ - rtc@10300 { - status = "disabled"; - }; - - i2c@11000 { - status = "okay"; - - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_pwr_sata1>; - pinctrl-names = "default"; - - usb0_power: regulator@1 { - enable-active-high; - }; - - sata1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "SATA1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red - &pmx_led_usb_green - &pmx_led_sys_green &pmx_led_sys_orange - &pmx_led_copy_green &pmx_led_copy_red - &pmx_led_hdd1_green &pmx_led_hdd1_red>; - pinctrl-names = "default"; - - green-sys { - label = "nsa325:green:sys"; - gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; - }; - orange-sys { - label = "nsa325:orange:sys"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - green-hdd1 { - label = "nsa325:green:hdd1"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - red-hdd1 { - label = "nsa325:red:hdd1"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - }; - green-hdd2 { - label = "nsa325:green:hdd2"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - red-hdd2 { - label = "nsa325:red:hdd2"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - green-usb { - label = "nsa325:green:usb"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; - }; - green-copy { - label = "nsa325:green:copy"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - red-copy { - label = "nsa325:red:copy"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - - /* The following pins are currently not assigned to a driver, - some of them should be configured as inputs. - pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act - &pmx_htp &pmx_vid_b1 - &pmx_power_resume_data &pmx_power_resume_clk>; */ - }; - -}; - -&mdio { - status = "okay"; - ethphy0: ethernet-phy@1 { - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/dts/kirkwood-nsa3x0-common.dtsi deleted file mode 100644 index a21c50d44a4..00000000000 --- a/arch/arm/dts/kirkwood-nsa3x0-common.dtsi +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "ZyXEL NSA310"; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - - pmx_usb_power: pmx-usb-power { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_pwr_off: pmx-pwr-off { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_pwr_off>; - pinctrl-names = "default"; - gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; - pinctrl-names = "default"; - - power { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - copy { - label = "Copy Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - reset { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - }; - - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power>; - pinctrl-names = "default"; - - usb0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&nand { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x0100000>; - }; - partition@100000 { - label = "uboot_env"; - reg = <0x0100000 0x0080000>; - }; - partition@180000 { - label = "key_store"; - reg = <0x0180000 0x0080000>; - }; - partition@200000 { - label = "info"; - reg = <0x0200000 0x0080000>; - }; - partition@280000 { - label = "etc"; - reg = <0x0280000 0x0a00000>; - }; - partition@c80000 { - label = "kernel_1"; - reg = <0x0c80000 0x0a00000>; - }; - partition@1680000 { - label = "rootfs1"; - reg = <0x1680000 0x2fc0000>; - }; - partition@4640000 { - label = "kernel_2"; - reg = <0x4640000 0x0a00000>; - }; - partition@5040000 { - label = "rootfs2"; - reg = <0x5040000 0x2fc0000>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-openrd-base.dts b/arch/arm/dts/kirkwood-openrd-base.dts deleted file mode 100644 index 094191ece3d..00000000000 --- a/arch/arm/dts/kirkwood-openrd-base.dts +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell OpenRD Base Board Description - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file contains the definitions that are specific to OpenRD - * base variant of the Marvell Kirkwood Development Board. - */ - -/dts-v1/; - -#include "kirkwood-openrd.dtsi" - -/ { - model = "OpenRD Base"; - compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - ocp@f1000000 { - serial@12100 { - status = "okay"; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-openrd-client.dts b/arch/arm/dts/kirkwood-openrd-client.dts deleted file mode 100644 index 74dc23daf64..00000000000 --- a/arch/arm/dts/kirkwood-openrd-client.dts +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell OpenRD Client Board Description - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file contains the definitions that are specific to OpenRD - * client variant of the Marvell Kirkwood Development Board. - */ - -/dts-v1/; - -#include "kirkwood-openrd.dtsi" - -/ { - model = "OpenRD Client"; - compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - ocp@f1000000 { - audio-controller@a0000 { - status = "okay"; - }; - i2c@11000 { - status = "okay"; - clock-frequency = <400000>; - - cs42l51: cs42l51@4a { - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - #sound-dai-cells = <0>; - }; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,cpu { - sound-dai = <&audio0 0>; - }; - - simple-audio-card,codec { - sound-dai = <&cs42l51>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; - ethphy1: ethernet-phy@24 { - reg = <24>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/dts/kirkwood-openrd-ultimate.dts b/arch/arm/dts/kirkwood-openrd-ultimate.dts deleted file mode 100644 index 888e13320c1..00000000000 --- a/arch/arm/dts/kirkwood-openrd-ultimate.dts +++ /dev/null @@ -1,55 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell OpenRD Ultimate Board Description - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file contains the definitions that are specific to OpenRD - * ultimate variant of the Marvell Kirkwood Development Board. - */ - -/dts-v1/; - -#include "kirkwood-openrd.dtsi" - -/ { - model = "OpenRD Ultimate"; - compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - ocp@f1000000 { - i2c@11000 { - status = "okay"; - clock-frequency = <400000>; - - cs42l51: cs42l51@4a { - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - }; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - ethphy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/dts/kirkwood-openrd.dtsi b/arch/arm/dts/kirkwood-openrd.dtsi deleted file mode 100644 index 47f03c69c55..00000000000 --- a/arch/arm/dts/kirkwood-openrd.dtsi +++ /dev/null @@ -1,122 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell OpenRD (Base|Client|Ultimate) Board Description - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file contains the definitions that are common between the three - * variants of the Marvell Kirkwood Development Board. - */ - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; - pinctrl-names = "default"; - - pmx_select28: pmx-select-rs232-rs485 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - pmx_sdio_cd: pmx-sdio-cd { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_select34: pmx-select-uart-sd { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "okay"; - - }; - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - mvsdio@90000 { - status = "okay"; - cd-gpios = <&gpio0 29 9>; - }; - gpio@10100 { - p28 { - gpio-hog; - gpios = <28 GPIO_ACTIVE_HIGH>; - /* - * SelRS232or485 selects between RS-232 or RS-485 - * mode for the second UART. - * - * Low: RS-232 - * High: RS-485 - * - * To use the second UART, you need to change also - * the SelUARTorSD. - */ - output-low; - line-name = "SelRS232or485"; - }; - }; - gpio@10140 { - p2 { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - /* - * SelUARTorSD selects between the second UART - * (serial@12100) and SD (mvsdio@90000). - * - * Low: UART - * High: SD - * - * When changing this line make sure the newly - * selected device node is enabled and the - * previously selected device node is disabled. - */ - output-high; /* Select SD by default */ - line-name = "SelUARTorSD"; - }; - }; - }; -}; - -&nand { - status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@600000 { - label = "root"; - reg = <0x0600000 0x1FA00000>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-pogo_e02.dts b/arch/arm/dts/kirkwood-pogo_e02.dts deleted file mode 100644 index f9e95e55f36..00000000000 --- a/arch/arm/dts/kirkwood-pogo_e02.dts +++ /dev/null @@ -1,132 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02 - * - * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org> - * - * based on information of dts files from - * Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com> - * OpenWrt by Felix Kaechele <heffer@fedoraproject.org> - * - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Cloud Engines Pogoplug E02"; - compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", - "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - gpio-leds { - compatible = "gpio-leds"; - - health { - label = "pogo_e02:green:health"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - fault { - label = "pogo_e02:orange:fault"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pinctrl { - pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange - &pmx_led_green >; - pinctrl-names = "default"; - - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_green: pmx-led-green { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - - pmx_led_orange: pmx-led-orange { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; -}; - -&uart0 { - status = "okay"; -}; - -&nand { - chip-delay = <40>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "pogoplug"; - reg = <0x0500000 0x2000000>; - }; - - partition@2500000 { - label = "root"; - reg = <0x02500000 0x5b00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/dts/kirkwood-pogoplug-series-4.dts deleted file mode 100644 index 5aa4669ae25..00000000000 --- a/arch/arm/dts/kirkwood-pogoplug-series-4.dts +++ /dev/null @@ -1,180 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4 - * inspired by the board files made by Kevin Mihelich for ArchLinux, - * and their DTS file. - * - * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org> - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6192.dtsi" -#include <dt-bindings/input/linux-event-codes.h> - -/ { - model = "Cloud Engines PogoPlug Series 4"; - compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", - "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; - - chosen { - stdout-path = "uart0:115200n8"; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_eject>; - pinctrl-names = "default"; - - eject { - debounce-interval = <50>; - wakeup-source; - linux,code = <KEY_EJECTCD>; - label = "Eject Button"; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_green &pmx_led_red>; - pinctrl-names = "default"; - - health { - label = "pogoplugv4:green:health"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - fault { - label = "pogoplugv4:red:fault"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&pinctrl { - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp21"; - marvell,function = "sata0"; - }; - - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp20"; - marvell,function = "sata1"; - }; - - pmx_sdio_cd: pmx-sdio-cd { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - pmx_sdio_wp: pmx-sdio-wp { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_button_eject: pmx-button-eject { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_green: pmx-led-green { - marvell,pins = "mpp22"; - marvell,function = "gpio"; - }; - - pmx_led_red: pmx-led-red { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; -}; - -&uart0 { - status = "okay"; -}; - -/* - * This PCIE controller has a USB 3.0 XHCI controller at 1,0 - */ -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&sata { - status = "okay"; - pinctrl-0 = <&pmx_sata0 &pmx_sata1>; - pinctrl-names = "default"; - nr-ports = <1>; -}; - -&sdio { - status = "okay"; - pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; - pinctrl-names = "default"; - cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; -}; - -&nand { - /* 128 MiB of NAND flash */ - chip-delay = <40>; - status = "okay"; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x200000>; - read-only; - }; - - partition@200000 { - label = "uImage"; - reg = <0x00200000 0x300000>; - }; - - partition@500000 { - label = "uImage2"; - reg = <0x00500000 0x300000>; - }; - - partition@800000 { - label = "failsafe"; - reg = <0x00800000 0x800000>; - }; - - partition@1000000 { - label = "root"; - reg = <0x01000000 0x7000000>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/dts/kirkwood-sheevaplug-common.dtsi deleted file mode 100644 index 0a698d3b739..00000000000 --- a/arch/arm/dts/kirkwood-sheevaplug-common.dtsi +++ /dev/null @@ -1,104 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs - * - * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> - */ - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_led_red: pmx-led-red { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_blue: pmx-led-blue { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - pmx_sdio_cd: pmx-sdio-cd { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - pmx_sdio_wp: pmx-sdio-wp { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "okay"; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 0>; - }; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "root"; - reg = <0x0500000 0x1fb00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-sheevaplug.dts b/arch/arm/dts/kirkwood-sheevaplug.dts deleted file mode 100644 index c73cc904e5c..00000000000 --- a/arch/arm/dts/kirkwood-sheevaplug.dts +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug - * - * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> - */ - -/dts-v1/; - -#include "kirkwood-sheevaplug-common.dtsi" - -/ { - model = "Globalscale Technologies SheevaPlug"; - compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - ocp@f1000000 { - mvsdio@90000 { - pinctrl-0 = <&pmx_sdio>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_blue &pmx_led_red>; - pinctrl-names = "default"; - - health { - label = "sheevaplug:blue:health"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - misc { - label = "sheevaplug:red:misc"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-synology.dtsi b/arch/arm/dts/kirkwood-synology.dtsi deleted file mode 100644 index c97ed29a0a0..00000000000 --- a/arch/arm/dts/kirkwood-synology.dtsi +++ /dev/null @@ -1,855 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Nodes for Marvell 628x Synology devices - * - * Andrew Lunn <andrew@lunn.ch> - * Ben Peddell <klightspeed@killerwolves.net> - * - */ - -/ { - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_alarmled_12: pmx-alarmled-12 { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_fanctrl_15: pmx-fanctrl-15 { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_fanctrl_16: pmx-fanctrl-16 { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_fanctrl_17: pmx-fanctrl-17 { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_fanalarm_18: pmx-fanalarm-18 { - marvell,pins = "mpp18"; - marvell,function = "gpo"; - }; - - pmx_hddled_20: pmx-hddled-20 { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - - pmx_hddled_21: pmx-hddled-21 { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_hddled_22: pmx-hddled-22 { - marvell,pins = "mpp22"; - marvell,function = "gpio"; - }; - - pmx_hddled_23: pmx-hddled-23 { - marvell,pins = "mpp23"; - marvell,function = "gpio"; - }; - - pmx_hddled_24: pmx-hddled-24 { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - pmx_hddled_25: pmx-hddled-25 { - marvell,pins = "mpp25"; - marvell,function = "gpio"; - }; - - pmx_hddled_26: pmx-hddled-26 { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; - - pmx_hddled_27: pmx-hddled-27 { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - pmx_hddled_28: pmx-hddled-28 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_hdd1_pwr_30: pmx-hdd-pwr-30 { - marvell,pins = "mpp30"; - marvell,function = "gpio"; - }; - - pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 { - marvell,pins = "mpp31"; - marvell,function = "gpio"; - }; - - pmx_fanctrl_32: pmx-fanctrl-32 { - marvell,pins = "mpp32"; - marvell,function = "gpio"; - }; - - pmx_fanctrl_33: pmx-fanctrl-33 { - marvell,pins = "mpp33"; - marvell,function = "gpo"; - }; - - pmx_fanctrl_34: pmx-fanctrl-34 { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - - pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - - pmx_fanalarm_35: pmx-fanalarm-35 { - marvell,pins = "mpp35"; - marvell,function = "gpio"; - }; - - pmx_hddled_36: pmx-hddled-36 { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_hddled_37: pmx-hddled-37 { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_hddled_38: pmx-hddled-38 { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - - pmx_hddled_39: pmx-hddled-39 { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_hddled_40: pmx-hddled-40 { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - - pmx_hddled_41: pmx-hddled-41 { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - pmx_hddled_42: pmx-hddled-42 { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - pmx_hddled_43: pmx-hddled-43 { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - - pmx_hddled_44: pmx-hddled-44 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - pmx_hddled_45: pmx-hddled-45 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - - pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - - pmx_fanalarm_44: pmx-fanalarm-44 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - pmx_fanalarm_45: pmx-fanalarm-45 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - }; - - rtc@10300 { - status = "disabled"; - }; - - spi@10600 { - status = "okay"; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - mode = <0>; - - partition@0 { - reg = <0x00000000 0x00080000>; - label = "RedBoot"; - }; - - partition@80000 { - reg = <0x00080000 0x00200000>; - label = "zImage"; - }; - - partition@280000 { - reg = <0x00280000 0x00140000>; - label = "rd.gz"; - }; - - partition@3c0000 { - reg = <0x003c0000 0x00010000>; - label = "vendor"; - }; - - partition@3d0000 { - reg = <0x003d0000 0x00020000>; - label = "RedBoot config"; - }; - - partition@3f0000 { - reg = <0x003f0000 0x00010000>; - label = "FIS directory"; - }; - }; - }; - - i2c@11000 { - status = "okay"; - clock-frequency = <400000>; - - rs5c372: rs5c372@32 { - status = "disabled"; - compatible = "ricoh,rs5c372"; - reg = <0x32>; - }; - - s35390a: s35390a@30 { - status = "disabled"; - compatible = "sii,s35390a"; - reg = <0x30>; - }; - }; - - serial@12000 { - status = "okay"; - }; - - serial@12100 { - status = "okay"; - }; - - poweroff@12100 { - compatible = "synology,power-off"; - reg = <0x12100 0x100>; - clocks = <&gate_clk 7>; - }; - - sata@80000 { - pinctrl-0 = <&pmx_sata0 &pmx_sata1>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <2>; - }; - }; - - gpio-fan-150-32-35 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34 - &pmx_fanalarm_35>; - pinctrl-names = "default"; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH - &gpio1 1 GPIO_ACTIVE_HIGH - &gpio1 2 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2200 1 - 2500 2 - 3000 4 - 3300 3 - 3700 5 - 3800 6 - 4200 7 >; - }; - - gpio-fan-150-15-18 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 - &pmx_fanalarm_18>; - pinctrl-names = "default"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH - &gpio0 16 GPIO_ACTIVE_HIGH - &gpio0 17 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2200 1 - 2500 2 - 3000 4 - 3300 3 - 3700 5 - 3800 6 - 4200 7 >; - }; - - gpio-fan-100-32-35 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34 - &pmx_fanalarm_35>; - pinctrl-names = "default"; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH - &gpio1 1 GPIO_ACTIVE_HIGH - &gpio1 2 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; - }; - - gpio-fan-100-15-18 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 - &pmx_fanalarm_18>; - pinctrl-names = "default"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH - &gpio0 16 GPIO_ACTIVE_HIGH - &gpio0 17 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; - }; - - gpio-fan-100-15-35-1 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 - &pmx_fanalarm_35>; - pinctrl-names = "default"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH - &gpio0 16 GPIO_ACTIVE_HIGH - &gpio0 17 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; - }; - - gpio-fan-100-15-35-3 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 - &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>; - pinctrl-names = "default"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH - &gpio0 16 GPIO_ACTIVE_HIGH - &gpio0 17 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH - &gpio1 12 GPIO_ACTIVE_HIGH - &gpio1 13 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; - }; - - gpio-leds-alarm-12 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_alarmled_12>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:alarm"; - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds-hdd-20 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22 - &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25 - &pmx_hddled_26 &pmx_hddled_27>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:green:hdd1"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - }; - - hdd1-amber { - label = "synology:amber:hdd1"; - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - - hdd2-green { - label = "synology:green:hdd2"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - }; - - hdd2-amber { - label = "synology:amber:hdd2"; - gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - }; - - hdd3-green { - label = "synology:green:hdd3"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - - hdd3-amber { - label = "synology:amber:hdd3"; - gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - }; - - hdd4-green { - label = "synology:green:hdd4"; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - }; - - hdd4-amber { - label = "synology:amber:hdd4"; - gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds-hdd-21-1 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:green:hdd1"; - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - - hdd1-amber { - label = "synology:amber:hdd1"; - gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds-hdd-21-2 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:green:hdd1"; - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - - hdd1-amber { - label = "synology:amber:hdd1"; - gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - }; - - hdd2-green { - label = "synology:green:hdd2"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - }; - - hdd2-amber { - label = "synology:amber:hdd2"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds-hdd-36 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38 - &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41 - &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44 - &pmx_hddled_45>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:green:hdd1"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - hdd1-amber { - label = "synology:amber:hdd1"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - - hdd2-green { - label = "synology:green:hdd2"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - hdd2-amber { - label = "synology:amber:hdd2"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - - hdd3-green { - label = "synology:green:hdd3"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - }; - - hdd3-amber { - label = "synology:amber:hdd3"; - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - }; - - hdd4-green { - label = "synology:green:hdd4"; - gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; - }; - - hdd4-amber { - label = "synology:amber:hdd4"; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - }; - - hdd5-green { - label = "synology:green:hdd5"; - gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; - }; - - hdd5-amber { - label = "synology:amber:hdd5"; - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds-hdd-38 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:green:hdd1"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - hdd1-amber { - label = "synology:amber:hdd1"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - - hdd2-green { - label = "synology:green:hdd2"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - hdd2-amber { - label = "synology:amber:hdd2"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - }; - - regulators-hdd-29 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd1power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdd2power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>; - }; - }; - - regulators-hdd-30-1 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd1_pwr_30>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd1power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; - }; - }; - - regulators-hdd-30-2 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd1power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; - }; - - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdd2power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - }; - - regulators-hdd-30-4 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34 - &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd1power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; - }; - - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdd2power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "hdd3power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - - regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "hdd4power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - }; - - regulators-hdd-31 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd2_pwr_31>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd2power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>; - }; - }; - - regulators-hdd-34 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44 - &pmx_hdd4_pwr_45>; - pinctrl-names = "default"; - - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdd2power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "hdd3power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - - regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "hdd4power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <8>; - }; - - ethphy1: ethernet-phy@1 { - device_type = "ethernet-phy"; - reg = <9>; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "disabled"; - - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood.dtsi b/arch/arm/dts/kirkwood.dtsi deleted file mode 100644 index 81c7eda2c44..00000000000 --- a/arch/arm/dts/kirkwood.dtsi +++ /dev/null @@ -1,393 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/include/ "skeleton.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> - -#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) - -/ { - compatible = "marvell,kirkwood"; - interrupt-parent = <&intc>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "marvell,feroceon"; - reg = <0>; - clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; - clock-names = "cpu_clk", "ddrclk", "powersave"; - }; - }; - - aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - i2c0 = &i2c0; - }; - - mbus@f1000000 { - compatible = "marvell,kirkwood-mbus", "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - /* If a board file needs to change this ranges it must replace it completely */ - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */ - MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */ - MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */ - >; - controller = <&mbusc>; - pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ - pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - - nand: nand@12f { - #address-cells = <1>; - #size-cells = <1>; - cle = <0>; - ale = <1>; - bank-width = <1>; - compatible = "marvell,orion-nand"; - reg = <MBUS_ID(0x01, 0x2f) 0 0x400>; - chip-delay = <25>; - /* set partition map and/or chip-delay in board dts */ - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "disabled"; - }; - - crypto_sram: sa-sram@301 { - compatible = "mmio-sram"; - reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>; - clocks = <&gate_clk 17>; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - - ocp@f1000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x0100000>; - #address-cells = <1>; - #size-cells = <1>; - - pinctrl: pin-controller@10000 { - /* set compatible property in SoC file */ - reg = <0x10000 0x20>; - - pmx_ge1: pmx-ge1 { - marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", - "mpp24", "mpp25", "mpp26", "mpp27", - "mpp30", "mpp31", "mpp32", "mpp33"; - marvell,function = "ge1"; - }; - - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", "mpp19"; - marvell,function = "nand"; - }; - - /* - * Default SPI0 pinctrl setting with CSn on mpp0, - * overwrite marvell,pins on board level if required. - */ - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - - /* - * Default UART pinctrl setting without RTS/CTS, - * overwrite marvell,pins on board level if required. - */ - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; - }; - - core_clk: core-clocks@10030 { - compatible = "marvell,kirkwood-core-clock"; - reg = <0x10030 0x4>; - #clock-cells = <1>; - }; - - spi0: spi@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <23>; - reg = <0x10600 0x28>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; - status = "disabled"; - }; - - gpio0: gpio@10100 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10100 0x40>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <35>, <36>, <37>, <38>; - clocks = <&gate_clk 7>; - }; - - gpio1: gpio@10140 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10140 0x40>; - ngpios = <18>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <39>, <40>, <41>; - clocks = <&gate_clk 7>; - }; - - i2c0: i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <29>; - clock-frequency = <100000>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - uart0: serial@12000 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <33>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - uart1: serial@12100 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <34>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; - status = "disabled"; - }; - - mbusc: mbus-controller@20000 { - compatible = "marvell,mbus-controller"; - reg = <0x20000 0x80>, <0x1500 0x20>; - }; - - sysc: system-controller@20000 { - compatible = "marvell,orion-system-controller"; - reg = <0x20000 0x120>; - }; - - bridge_intc: bridge-interrupt-ctrl@20110 { - compatible = "marvell,orion-bridge-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20110 0x8>; - interrupts = <1>; - marvell,#interrupts = <6>; - }; - - gate_clk: clock-gating-control@2011c { - compatible = "marvell,kirkwood-gating-clock"; - reg = <0x2011c 0x4>; - clocks = <&core_clk 0>; - #clock-cells = <1>; - }; - - l2: l2-cache@20128 { - compatible = "marvell,kirkwood-cache"; - reg = <0x20128 0x4>; - }; - - intc: main-interrupt-ctrl@20200 { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20200 0x10>, <0x20210 0x10>; - }; - - timer: timer@20300 { - compatible = "marvell,orion-timer"; - reg = <0x20300 0x20>; - interrupt-parent = <&bridge_intc>; - interrupts = <1>, <2>; - clocks = <&core_clk 0>; - }; - - wdt: watchdog-timer@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>, <0x20108 0x4>; - interrupt-parent = <&bridge_intc>; - interrupts = <3>; - clocks = <&gate_clk 7>; - status = "okay"; - }; - - cesa: crypto@30000 { - compatible = "marvell,kirkwood-crypto"; - reg = <0x30000 0x10000>; - reg-names = "regs"; - interrupts = <22>; - clocks = <&gate_clk 17>; - marvell,crypto-srams = <&crypto_sram>; - marvell,crypto-sram-size = <0x800>; - status = "okay"; - }; - - usb0: ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <19>; - clocks = <&gate_clk 3>; - status = "okay"; - }; - - dma0: xor@60800 { - compatible = "marvell,orion-xor"; - reg = <0x60800 0x100 - 0x60A00 0x100>; - status = "okay"; - clocks = <&gate_clk 8>; - - xor00 { - interrupts = <5>; - dmacap,memcpy; - dmacap,xor; - }; - xor01 { - interrupts = <6>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; - }; - }; - - dma1: xor@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60B00 0x100>; - status = "okay"; - clocks = <&gate_clk 16>; - - xor00 { - interrupts = <7>; - dmacap,memcpy; - dmacap,xor; - }; - xor01 { - interrupts = <8>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; - }; - }; - - eth0: ethernet-controller@72000 { - compatible = "marvell,kirkwood-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - clocks = <&gate_clk 0>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; - - eth0port: ethernet0-port@0 { - compatible = "marvell,kirkwood-eth-port"; - reg = <0>; - interrupts = <11>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ - }; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <46>; - clocks = <&gate_clk 0>; - status = "disabled"; - - /* add phy nodes in board file */ - }; - - eth1: ethernet-controller@76000 { - compatible = "marvell,kirkwood-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76000 0x4000>; - clocks = <&gate_clk 19>; - marvell,tx-checksum-limit = <1600>; - pinctrl-0 = <&pmx_ge1>; - pinctrl-names = "default"; - status = "disabled"; - - eth1port: ethernet1-port@0 { - compatible = "marvell,kirkwood-eth-port"; - reg = <0>; - interrupts = <15>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ - }; - }; - - sata_phy0: sata-phy@82000 { - compatible = "marvell,mvebu-sata-phy"; - reg = <0x82000 0x0334>; - clocks = <&gate_clk 14>; - clock-names = "sata"; - #phy-cells = <0>; - status = "ok"; - }; - - sata_phy1: sata-phy@84000 { - compatible = "marvell,mvebu-sata-phy"; - reg = <0x84000 0x0334>; - clocks = <&gate_clk 15>; - clock-names = "sata"; - #phy-cells = <0>; - status = "ok"; - }; - - audio0: audio-controller@a0000 { - compatible = "marvell,kirkwood-audio"; - #sound-dai-cells = <0>; - reg = <0xa0000 0x2210>; - interrupts = <24>; - clocks = <&gate_clk 9>; - clock-names = "internal"; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/meson-axg-jethome-jethub-j100.dts b/arch/arm/dts/meson-axg-jethome-jethub-j100.dts deleted file mode 100644 index 5783732dc6f..00000000000 --- a/arch/arm/dts/meson-axg-jethome-jethub-j100.dts +++ /dev/null @@ -1,361 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in> - * Copyright (c) 2020 JetHome - * Author: Aleksandr Kazantsev <ak@tvip.ru> - * Author: Alexey Shevelkin <ash@tvip.ru> - * Author: Vyacheslav Bocharov <adeep@lexina.in> - */ - -/dts-v1/; - -#include "meson-axg.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/thermal/thermal.h> - -/ { - compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg"; - model = "JetHome JetHub J100"; - aliases { - serial0 = &uart_AO; /* Console */ - serial1 = &uart_AO_B; /* External UART (Wireless Module) */ - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* 1024MB RAM */ - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - reserved-memory { - linux,cma { - size = <0x0 0x400000>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - usb_pwr: regulator-usb_pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&scpi_sensors 0>; - trips { - cpu_passive: cpu-passive { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - cpu_hot: cpu-hot { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "hot"; - }; - - cpu_critical: cpu-critical { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - }; - - cpu_cooling_maps: cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - onewire { - compatible = "w1-gpio"; - gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; - #gpio-cells = <1>; - }; -}; - -&efuse { - sn: sn@32 { - reg = <0x32 0x20>; - }; - - eth_mac: eth_mac@0 { - reg = <0x0 0x6>; - }; - - bt_mac: bt_mac@6 { - reg = <0x6 0x6>; - }; - - wifi_mac: wifi_mac@c { - reg = <0xc 0x6>; - }; - - bid: bid@12 { - reg = <0x12 0x20>; - }; -}; - -ðmac { - status = "okay"; - pinctrl-0 = <ð_rmii_x_pins>; - pinctrl-names = "default"; - phy-handle = <ð_phy0>; - phy-mode = "rmii"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ - eth_phy0: ethernet-phy@0 { - /* compatible = "ethernet-phy-id0243.0c54";*/ - max-speed = <100>; - reg = <0>; - - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* Internal I2C bus (on CPU module) */ -&i2c1 { - status = "okay"; - pinctrl-0 = <&i2c1_z_pins>; - pinctrl-names = "default"; - - /* RTC */ - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; -}; - -/* Peripheral I2C bus (on motherboard) */ -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; - pinctrl-names = "default"; -}; - -&pwm_ab { - status = "okay"; - pinctrl-0 = <&pwm_a_x20_pins>; - pinctrl-names = "default"; -}; - -/* wifi module */ -&sd_emmc_b { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr104; - max-frequency = <200000000>; - non-removable; - disable-wp; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* emmc storage */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* UART Bluetooth */ -&uart_B { - status = "okay"; - pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; - }; -}; - -/* UART Console */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -/* UART Wireless module */ -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - phy-supply = <&usb_pwr>; -}; - -&spicc1 { - status = "okay"; - pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; - pinctrl-names = "default"; -}; - -&gpio { - gpio-line-names = - "", "", "", "", "", // 0 - 4 - "", "", "", "", "", // 5 - 9 - "UserButton", "", "", "", "", // 10 - 14 - "", "", "", "", "", // 15 - 19 - "", "", "", "", "", // 20 - 24 - "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 - "Output1", "", "", "", "", // 30 - 34 - "", "ZigBeeBOOT", "", "", "", // 35 - 39 - "", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 - "Input2", "Input1", "", "", "", // 45 - 49 - "", "", "", "", "", // 50 - 54 - "", "", "", "", "", // 55 - 59 - "", "", "", "", "", // 60 - 64 - "", "", "", "", "", // 65 - 69 - "", "", "", "", "", // 70 - 74 - "", "", "", "", "", // 75 - 79 - "", "", "", "", "", // 80 - 84 - "", ""; // 85-86 -}; - -&cpu0 { - #cooling-cells = <2>; -}; - -&cpu1 { - #cooling-cells = <2>; -}; - -&cpu2 { - #cooling-cells = <2>; -}; - -&cpu3 { - #cooling-cells = <2>; -}; diff --git a/arch/arm/dts/meson-axg-s400.dts b/arch/arm/dts/meson-axg-s400.dts deleted file mode 100644 index 359589d1dfa..00000000000 --- a/arch/arm/dts/meson-axg-s400.dts +++ /dev/null @@ -1,602 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Amlogic, Inc. All rights reserved. - */ - -/dts-v1/; - -#include "meson-axg.dtsi" -#include <dt-bindings/input/input.h> - -/ { - compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg"; - model = "Amlogic Meson AXG S400 Development Board"; - - adc_keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - button-next { - label = "Next"; - linux,code = <KEY_NEXT>; - press-threshold-microvolt = <1116000>; /* 62% */ - }; - - button-prev { - label = "Previous"; - linux,code = <KEY_PREVIOUS>; - press-threshold-microvolt = <900000>; /* 50% */ - }; - - button-wifi { - label = "Wifi"; - linux,code = <KEY_WLAN>; - press-threshold-microvolt = <684000>; /* 38% */ - }; - - button-up { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - press-threshold-microvolt = <468000>; /* 26% */ - }; - - button-down { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - press-threshold-microvolt = <252000>; /* 14% */ - }; - - button-voice { - label = "Voice"; - linux,code = <KEY_VOICECOMMAND>; - press-threshold-microvolt = <0>; /* 0% */ - }; - }; - - aliases { - serial0 = &uart_AO; - serial1 = &uart_A; - }; - - linein: audio-codec-0 { - #sound-dai-cells = <0>; - compatible = "everest,es7241"; - VDDA-supply = <&vcc_3v3>; - VDDP-supply = <&vcc_3v3>; - VDDD-supply = <&vcc_3v3>; - status = "okay"; - sound-name-prefix = "Linein"; - }; - - lineout: audio-codec-1 { - #sound-dai-cells = <0>; - compatible = "everest,es7154"; - VDD-supply = <&vcc_3v3>; - PVDD-supply = <&vcc_5v>; - status = "okay"; - sound-name-prefix = "Lineout"; - }; - - spdif_dit: audio-codec-2 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - status = "okay"; - sound-name-prefix = "DIT"; - }; - - dmics: audio-codec-3 { - #sound-dai-cells = <0>; - compatible = "dmic-codec"; - num-channels = <7>; - wakeup-delay-ms = <50>; - status = "okay"; - sound-name-prefix = "MIC"; - }; - - spdif_dir: audio-codec-4 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dir"; - status = "okay"; - sound-name-prefix = "DIR"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - usb_pwr: regulator-usb_pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - speaker-leds { - compatible = "gpio-leds"; - - aled1 { - label = "speaker:aled1"; - gpios = <&gpio_speaker 7 0>; - }; - - aled2 { - label = "speaker:aled2"; - gpios = <&gpio_speaker 6 0>; - }; - - aled3 { - label = "speaker:aled3"; - gpios = <&gpio_speaker 5 0>; - }; - - aled4 { - label = "speaker:aled4"; - gpios = <&gpio_speaker 4 0>; - }; - - aled5 { - label = "speaker:aled5"; - gpios = <&gpio_speaker 3 0>; - }; - - aled6 { - label = "speaker:aled6"; - gpios = <&gpio_speaker 2 0>; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "AXG-S400"; - audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, - <&tdmin_lb>, <&tdmout_c>; - audio-widgets = "Line", "Lineout", - "Line", "Linein", - "Speaker", "Speaker1 Left", - "Speaker", "Speaker1 Right"; - audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "TDMOUT_C IN 1", "FRDDR_B OUT 2", - "SPDIFOUT IN 1", "FRDDR_B OUT 3", - "TDMOUT_C IN 2", "FRDDR_C OUT 2", - "SPDIFOUT IN 2", "FRDDR_C OUT 3", - "TDM_C Playback", "TDMOUT_C OUT", - "TDMIN_A IN 2", "TDM_C Capture", - "TDMIN_A IN 5", "TDM_C Loopback", - "TDMIN_B IN 2", "TDM_C Capture", - "TDMIN_B IN 5", "TDM_C Loopback", - "TDMIN_C IN 2", "TDM_C Capture", - "TDMIN_C IN 5", "TDM_C Loopback", - "TDMIN_LB IN 2", "TDM_C Loopback", - "TDMIN_LB IN 5", "TDM_C Capture", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT", - "TODDR_A IN 2", "TDMIN_C OUT", - "TODDR_B IN 2", "TDMIN_C OUT", - "TODDR_C IN 2", "TDMIN_C OUT", - "TODDR_A IN 3", "SPDIFIN Capture", - "TODDR_B IN 3", "SPDIFIN Capture", - "TODDR_C IN 3", "SPDIFIN Capture", - "TODDR_A IN 4", "PDM Capture", - "TODDR_B IN 4", "PDM Capture", - "TODDR_C IN 4", "PDM Capture", - "TODDR_A IN 6", "TDMIN_LB OUT", - "TODDR_B IN 6", "TDMIN_LB OUT", - "TODDR_C IN 6", "TDMIN_LB OUT", - "Lineout", "Lineout AOUTL", - "Lineout", "Lineout AOUTR", - "Speaker1 Left", "SPK1 OUT_A", - "Speaker1 Left", "SPK1 OUT_B", - "Speaker1 Right", "SPK1 OUT_C", - "Speaker1 Right", "SPK1 OUT_D", - "Linein AINL", "Linein", - "Linein AINR", "Linein"; - assigned-clocks = <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <589824000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - dai-link-6 { - sound-dai = <&tdmif_c>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-rx-mask-1 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&lineout>; - }; - - codec-1 { - sound-dai = <&speaker_amp1>; - }; - - codec-2 { - sound-dai = <&linein>; - }; - - }; - - dai-link-7 { - sound-dai = <&spdifout>; - - codec { - sound-dai = <&spdif_dit>; - }; - }; - - dai-link-8 { - sound-dai = <&spdifin>; - - codec { - sound-dai = <&spdif_dir>; - }; - }; - - dai-link-9 { - sound-dai = <&pdm>; - - codec { - sound-dai = <&dmics>; - }; - }; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; -}; - -ðmac { - status = "okay"; - pinctrl-0 = <ð_rgmii_y_pins>; - pinctrl-names = "default"; - phy-handle = <ð_phy0>; - phy-mode = "rgmii"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - eth_phy0: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - interrupt-parent = <&gpio_intc>; - interrupts = <98 IRQ_TYPE_LEVEL_LOW>; - eee-broken-1000t; - }; - }; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&i2c1 { - status = "okay"; - pinctrl-0 = <&i2c1_z_pins>; - pinctrl-names = "default"; - - speaker_amp1: audio-codec@1b { - compatible = "ti,tas5707"; - reg = <0x1b>; - reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - AVDD-supply = <&vcc_3v3>; - DVDD-supply = <&vcc_3v3>; - PVDD_A-supply = <&main_12v>; - PVDD_B-supply = <&main_12v>; - PVDD_C-supply = <&main_12v>; - PVDD_D-supply = <&main_12v>; - sound-name-prefix = "SPK1"; - }; -}; - -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; - pinctrl-names = "default"; - - gpio_speaker: gpio-controller@1f { - compatible = "nxp,pca9557"; - reg = <0x1f>; - gpio-controller; - #gpio-cells = <2>; - vcc-supply = <&vddao_3v3>; - }; -}; - -&pdm { - pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>, - <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pcieA { - reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pcieB { - reset-gpios = <&gpio GPIOZ_10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - status = "okay"; -}; - -&pwm_ab { - status = "okay"; - pinctrl-0 = <&pwm_a_x20_pins>; - pinctrl-names = "default"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* wifi module */ -&sd_emmc_b { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr104; - max-frequency = <200000000>; - non-removable; - disable-wp; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* emmc storage */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -&spdifin { - pinctrl-0 = <&spdif_in_a19_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&spdifout { - pinctrl-0 = <&spdif_out_a20_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tdmif_a { - pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>, - <&tdma_din0_pins>, <&tdma_dout0_x15_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tdmif_b { - pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>, - <&tdmb_din3_pins>, <&mclk_b_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tdmif_c { - pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>, - <&tdmc_din1_pins>, <&tdmc_dout2_pins>, - <&mclk_c_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmin_c { - status = "okay"; -}; - -&tdmin_lb { - status = "okay"; -}; - -&tdmout_c { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "otg"; - vbus-supply = <&usb_pwr>; -}; diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi deleted file mode 100644 index 3f5254eeb47..00000000000 --- a/arch/arm/dts/meson-axg.dtsi +++ /dev/null @@ -1,1957 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Amlogic, Inc. All rights reserved. - */ - -#include <dt-bindings/clock/axg-aoclkc.h> -#include <dt-bindings/clock/axg-audio-clkc.h> -#include <dt-bindings/clock/axg-clkc.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/gpio/meson-axg-gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> -#include <dt-bindings/reset/amlogic,meson-axg-reset.h> -#include <dt-bindings/power/meson-axg-power.h> - -/ { - compatible = "amlogic,meson-axg"; - - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - }; - - l2: l2-cache0 { - compatible = "cache"; - }; - }; - - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - clocks = <&clkc CLKID_EFUSE>; - #address-cells = <1>; - #size-cells = <1>; - read-only; - secure-monitor = <&sm>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* 16 MiB reserved for Hardware ROM Firmware */ - hwrom_reserved: hwrom@0 { - reg = <0x0 0x0 0x0 0x1000000>; - no-map; - }; - - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - }; - - scpi { - compatible = "arm,scpi-pre-1.0"; - mboxes = <&mailbox 1 &mailbox 2>; - shmem = <&cpu_scp_lpri &cpu_scp_hpri>; - - scpi_clocks: clocks { - compatible = "arm,scpi-clocks"; - - scpi_dvfs: clock-controller { - compatible = "arm,scpi-dvfs-clocks"; - #clock-cells = <1>; - clock-indices = <0>; - clock-output-names = "vcpu"; - }; - }; - - scpi_sensors: sensors { - compatible = "amlogic,meson-gxbb-scpi-sensors"; - #thermal-sensor-cells = <1>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - pcieA: pcie@f9800000 { - compatible = "amlogic,axg-pcie", "snps,dw-pcie"; - reg = <0x0 0xf9800000 0x0 0x400000>, - <0x0 0xff646000 0x0 0x2000>, - <0x0 0xf9f00000 0x0 0x100000>; - reg-names = "elbi", "cfg", "config"; - interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; - bus-range = <0x0 0xff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x82000000 0 0xf9c00000 0x0 0xf9c00000 0 0x00300000>; - - clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_A>, <&clkc CLKID_PCIE_CML_EN0>; - clock-names = "general", "pclk", "port"; - resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>; - reset-names = "port", "apb"; - num-lanes = <1>; - phys = <&pcie_phy>; - phy-names = "pcie"; - status = "disabled"; - }; - - pcieB: pcie@fa000000 { - compatible = "amlogic,axg-pcie", "snps,dw-pcie"; - reg = <0x0 0xfa000000 0x0 0x400000>, - <0x0 0xff648000 0x0 0x2000>, - <0x0 0xfa400000 0x0 0x100000>; - reg-names = "elbi", "cfg", "config"; - interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; - bus-range = <0x0 0xff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x82000000 0 0xfa500000 0x0 0xfa500000 0 0x00300000>; - - clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_B>, <&clkc CLKID_PCIE_CML_EN1>; - clock-names = "general", "pclk", "port"; - resets = <&reset RESET_PCIE_B>, <&reset RESET_PCIE_APB>; - reset-names = "port", "apb"; - num-lanes = <1>; - phys = <&pcie_phy>; - phy-names = "pcie"; - status = "disabled"; - }; - - usb: usb@ffe09080 { - compatible = "amlogic,meson-axg-usb-ctrl"; - reg = <0x0 0xffe09080 0x0 0x20>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "usb_ctrl", "ddr"; - resets = <&reset RESET_USB_OTG>; - - dr_mode = "otg"; - - phys = <&usb2_phy1>; - phy-names = "usb2-phy1"; - - dwc2: usb@ff400000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xff400000 0x0 0x40000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB1>; - clock-names = "otg"; - phys = <&usb2_phy1>; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - - dwc3: usb@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - maximum-speed = "high-speed"; - snps,dis_u2_susphy_quirk; - }; - }; - - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", - "snps,dwmac-3.70a", - "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000>, - <0x0 0xff634540 0x0 0x8>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "stmmaceth", "clkin0", "clkin1", - "timing-adjustment"; - rx-fifo-depth = <4096>; - tx-fifo-depth = <2048>; - power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>; - status = "disabled"; - }; - - pcie_phy: phy@ff644000 { - compatible = "amlogic,axg-pcie-phy"; - reg = <0x0 0xff644000 0x0 0x1c>; - resets = <&reset RESET_PCIE_PHY>; - phys = <&mipi_pcie_analog_dphy>; - phy-names = "analog"; - #phy-cells = <0>; - }; - - pdm: audio-controller@ff632000 { - compatible = "amlogic,axg-pdm"; - reg = <0x0 0xff632000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - status = "disabled"; - }; - - periphs: bus@ff634000 { - compatible = "simple-bus"; - reg = <0x0 0xff634000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; - - hwrng: rng@18 { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x18 0x0 0x4>; - clocks = <&clkc CLKID_RNG0>; - clock-names = "core"; - }; - - pinctrl_periphs: pinctrl@480 { - compatible = "amlogic,meson-axg-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@480 { - reg = <0x0 0x00480 0x0 0x40>, - <0x0 0x004e8 0x0 0x14>, - <0x0 0x00520 0x0 0x14>, - <0x0 0x00430 0x0 0x3c>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_periphs 0 0 86>; - }; - - i2c0_pins: i2c0 { - mux { - groups = "i2c0_sck", - "i2c0_sda"; - function = "i2c0"; - bias-disable; - }; - }; - - i2c1_x_pins: i2c1_x { - mux { - groups = "i2c1_sck_x", - "i2c1_sda_x"; - function = "i2c1"; - bias-disable; - }; - }; - - i2c1_z_pins: i2c1_z { - mux { - groups = "i2c1_sck_z", - "i2c1_sda_z"; - function = "i2c1"; - bias-disable; - }; - }; - - i2c2_a_pins: i2c2_a { - mux { - groups = "i2c2_sck_a", - "i2c2_sda_a"; - function = "i2c2"; - bias-disable; - }; - }; - - i2c2_x_pins: i2c2_x { - mux { - groups = "i2c2_sck_x", - "i2c2_sda_x"; - function = "i2c2"; - bias-disable; - }; - }; - - i2c3_a6_pins: i2c3_a6 { - mux { - groups = "i2c3_sda_a6", - "i2c3_sck_a7"; - function = "i2c3"; - bias-disable; - }; - }; - - i2c3_a12_pins: i2c3_a12 { - mux { - groups = "i2c3_sda_a12", - "i2c3_sck_a13"; - function = "i2c3"; - bias-disable; - }; - }; - - i2c3_a19_pins: i2c3_a19 { - mux { - groups = "i2c3_sda_a19", - "i2c3_sck_a20"; - function = "i2c3"; - bias-disable; - }; - }; - - emmc_pins: emmc { - mux-0 { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7", - "emmc_cmd"; - function = "emmc"; - bias-pull-up; - }; - - mux-1 { - groups = "emmc_clk"; - function = "emmc"; - bias-disable; - }; - }; - - emmc_ds_pins: emmc_ds { - mux { - groups = "emmc_ds"; - function = "emmc"; - bias-pull-down; - }; - }; - - emmc_clk_gate_pins: emmc_clk_gate { - mux { - groups = "BOOT_8"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - eth_rgmii_x_pins: eth-x-rgmii { - mux { - groups = "eth_mdio_x", - "eth_mdc_x", - "eth_rgmii_rx_clk_x", - "eth_rx_dv_x", - "eth_rxd0_x", - "eth_rxd1_x", - "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txen_x", - "eth_txd0_x", - "eth_txd1_x", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; - bias-disable; - }; - }; - - eth_rgmii_y_pins: eth-y-rgmii { - mux { - groups = "eth_mdio_y", - "eth_mdc_y", - "eth_rgmii_rx_clk_y", - "eth_rx_dv_y", - "eth_rxd0_y", - "eth_rxd1_y", - "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txen_y", - "eth_txd0_y", - "eth_txd1_y", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; - bias-disable; - }; - }; - - eth_rmii_x_pins: eth-x-rmii { - mux { - groups = "eth_mdio_x", - "eth_mdc_x", - "eth_rgmii_rx_clk_x", - "eth_rx_dv_x", - "eth_rxd0_x", - "eth_rxd1_x", - "eth_txen_x", - "eth_txd0_x", - "eth_txd1_x"; - function = "eth"; - bias-disable; - }; - }; - - eth_rmii_y_pins: eth-y-rmii { - mux { - groups = "eth_mdio_y", - "eth_mdc_y", - "eth_rgmii_rx_clk_y", - "eth_rx_dv_y", - "eth_rxd0_y", - "eth_rxd1_y", - "eth_txen_y", - "eth_txd0_y", - "eth_txd1_y"; - function = "eth"; - bias-disable; - }; - }; - - mclk_b_pins: mclk_b { - mux { - groups = "mclk_b"; - function = "mclk_b"; - bias-disable; - }; - }; - - mclk_c_pins: mclk_c { - mux { - groups = "mclk_c"; - function = "mclk_c"; - bias-disable; - }; - }; - - pdm_dclk_a14_pins: pdm_dclk_a14 { - mux { - groups = "pdm_dclk_a14"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_dclk_a19_pins: pdm_dclk_a19 { - mux { - groups = "pdm_dclk_a19"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_pins: pdm_din0 { - mux { - groups = "pdm_din0"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_pins: pdm_din1 { - mux { - groups = "pdm_din1"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_pins: pdm_din2 { - mux { - groups = "pdm_din2"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_pins: pdm_din3 { - mux { - groups = "pdm_din3"; - function = "pdm"; - bias-disable; - }; - }; - - pwm_a_a_pins: pwm_a_a { - mux { - groups = "pwm_a_a"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_a_x18_pins: pwm_a_x18 { - mux { - groups = "pwm_a_x18"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_a_x20_pins: pwm_a_x20 { - mux { - groups = "pwm_a_x20"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_a_z_pins: pwm_a_z { - mux { - groups = "pwm_a_z"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_b_a_pins: pwm_b_a { - mux { - groups = "pwm_b_a"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_b_x_pins: pwm_b_x { - mux { - groups = "pwm_b_x"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_b_z_pins: pwm_b_z { - mux { - groups = "pwm_b_z"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_c_a_pins: pwm_c_a { - mux { - groups = "pwm_c_a"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x10_pins: pwm_c_x10 { - mux { - groups = "pwm_c_x10"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x17_pins: pwm_c_x17 { - mux { - groups = "pwm_c_x17"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_d_x11_pins: pwm_d_x11 { - mux { - groups = "pwm_d_x11"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_d_x16_pins: pwm_d_x16 { - mux { - groups = "pwm_d_x16"; - function = "pwm_d"; - bias-disable; - }; - }; - - sdio_pins: sdio { - mux-0 { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_cmd"; - function = "sdio"; - bias-pull-up; - }; - - mux-1 { - groups = "sdio_clk"; - function = "sdio"; - bias-disable; - }; - }; - - sdio_clk_gate_pins: sdio_clk_gate { - mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - spdif_in_z_pins: spdif_in_z { - mux { - groups = "spdif_in_z"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a1_pins: spdif_in_a1 { - mux { - groups = "spdif_in_a1"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a7_pins: spdif_in_a7 { - mux { - groups = "spdif_in_a7"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a19_pins: spdif_in_a19 { - mux { - groups = "spdif_in_a19"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a20_pins: spdif_in_a20 { - mux { - groups = "spdif_in_a20"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_out_a1_pins: spdif_out_a1 { - mux { - groups = "spdif_out_a1"; - function = "spdif_out"; - bias-disable; - }; - }; - - spdif_out_a11_pins: spdif_out_a11 { - mux { - groups = "spdif_out_a11"; - function = "spdif_out"; - bias-disable; - }; - }; - - spdif_out_a19_pins: spdif_out_a19 { - mux { - groups = "spdif_out_a19"; - function = "spdif_out"; - bias-disable; - }; - }; - - spdif_out_a20_pins: spdif_out_a20 { - mux { - groups = "spdif_out_a20"; - function = "spdif_out"; - bias-disable; - }; - }; - - spdif_out_z_pins: spdif_out_z { - mux { - groups = "spdif_out_z"; - function = "spdif_out"; - bias-disable; - }; - }; - - spi0_pins: spi0 { - mux { - groups = "spi0_miso", - "spi0_mosi", - "spi0_clk"; - function = "spi0"; - bias-disable; - }; - }; - - spi0_ss0_pins: spi0_ss0 { - mux { - groups = "spi0_ss0"; - function = "spi0"; - bias-disable; - }; - }; - - spi0_ss1_pins: spi0_ss1 { - mux { - groups = "spi0_ss1"; - function = "spi0"; - bias-disable; - }; - }; - - spi0_ss2_pins: spi0_ss2 { - mux { - groups = "spi0_ss2"; - function = "spi0"; - bias-disable; - }; - }; - - spi1_a_pins: spi1_a { - mux { - groups = "spi1_miso_a", - "spi1_mosi_a", - "spi1_clk_a"; - function = "spi1"; - bias-disable; - }; - }; - - spi1_ss0_a_pins: spi1_ss0_a { - mux { - groups = "spi1_ss0_a"; - function = "spi1"; - bias-disable; - }; - }; - - spi1_ss1_pins: spi1_ss1 { - mux { - groups = "spi1_ss1"; - function = "spi1"; - bias-disable; - }; - }; - - spi1_x_pins: spi1_x { - mux { - groups = "spi1_miso_x", - "spi1_mosi_x", - "spi1_clk_x"; - function = "spi1"; - bias-disable; - }; - }; - - spi1_ss0_x_pins: spi1_ss0_x { - mux { - groups = "spi1_ss0_x"; - function = "spi1"; - bias-disable; - }; - }; - - tdma_din0_pins: tdma_din0 { - mux { - groups = "tdma_din0"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_dout0_x14_pins: tdma_dout0_x14 { - mux { - groups = "tdma_dout0_x14"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_dout0_x15_pins: tdma_dout0_x15 { - mux { - groups = "tdma_dout0_x15"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_dout1_pins: tdma_dout1 { - mux { - groups = "tdma_dout1"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_din1_pins: tdma_din1 { - mux { - groups = "tdma_din1"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_fs_pins: tdma_fs { - mux { - groups = "tdma_fs"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_fs_slv_pins: tdma_fs_slv { - mux { - groups = "tdma_fs_slv"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_sclk_pins: tdma_sclk { - mux { - groups = "tdma_sclk"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_sclk_slv_pins: tdma_sclk_slv { - mux { - groups = "tdma_sclk_slv"; - function = "tdma"; - bias-disable; - }; - }; - - tdmb_din0_pins: tdmb_din0 { - mux { - groups = "tdmb_din0"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_din1_pins: tdmb_din1 { - mux { - groups = "tdmb_din1"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_din2_pins: tdmb_din2 { - mux { - groups = "tdmb_din2"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_din3_pins: tdmb_din3 { - mux { - groups = "tdmb_din3"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_dout0_pins: tdmb_dout0 { - mux { - groups = "tdmb_dout0"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_dout1_pins: tdmb_dout1 { - mux { - groups = "tdmb_dout1"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_dout2_pins: tdmb_dout2 { - mux { - groups = "tdmb_dout2"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_dout3_pins: tdmb_dout3 { - mux { - groups = "tdmb_dout3"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_fs_pins: tdmb_fs { - mux { - groups = "tdmb_fs"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_fs_slv_pins: tdmb_fs_slv { - mux { - groups = "tdmb_fs_slv"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_sclk_pins: tdmb_sclk { - mux { - groups = "tdmb_sclk"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_sclk_slv_pins: tdmb_sclk_slv { - mux { - groups = "tdmb_sclk_slv"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmc_fs_pins: tdmc_fs { - mux { - groups = "tdmc_fs"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_fs_slv_pins: tdmc_fs_slv { - mux { - groups = "tdmc_fs_slv"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_sclk_pins: tdmc_sclk { - mux { - groups = "tdmc_sclk"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_sclk_slv_pins: tdmc_sclk_slv { - mux { - groups = "tdmc_sclk_slv"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_din0_pins: tdmc_din0 { - mux { - groups = "tdmc_din0"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_din1_pins: tdmc_din1 { - mux { - groups = "tdmc_din1"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_din2_pins: tdmc_din2 { - mux { - groups = "tdmc_din2"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_din3_pins: tdmc_din3 { - mux { - groups = "tdmc_din3"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_dout0_pins: tdmc_dout0 { - mux { - groups = "tdmc_dout0"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_dout1_pins: tdmc_dout1 { - mux { - groups = "tdmc_dout1"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_dout2_pins: tdmc_dout2 { - mux { - groups = "tdmc_dout2"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_dout3_pins: tdmc_dout3 { - mux { - groups = "tdmc_dout3"; - function = "tdmc"; - bias-disable; - }; - }; - - uart_a_pins: uart_a { - mux { - groups = "uart_tx_a", - "uart_rx_a"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_a_cts_rts_pins: uart_a_cts_rts { - mux { - groups = "uart_cts_a", - "uart_rts_a"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_b_x_pins: uart_b_x { - mux { - groups = "uart_tx_b_x", - "uart_rx_b_x"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_b_x_cts_rts_pins: uart_b_x_cts_rts { - mux { - groups = "uart_cts_b_x", - "uart_rts_b_x"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_b_z_pins: uart_b_z { - mux { - groups = "uart_tx_b_z", - "uart_rx_b_z"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_b_z_cts_rts_pins: uart_b_z_cts_rts { - mux { - groups = "uart_cts_b_z", - "uart_rts_b_z"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_ao_b_z_pins: uart_ao_b_z { - mux { - groups = "uart_ao_tx_b_z", - "uart_ao_rx_b_z"; - function = "uart_ao_b_z"; - bias-disable; - }; - }; - - uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { - mux { - groups = "uart_ao_cts_b_z", - "uart_ao_rts_b_z"; - function = "uart_ao_b_z"; - bias-disable; - }; - }; - }; - }; - - hiubus: bus@ff63c000 { - compatible = "simple-bus"; - reg = <0x0 0xff63c000 0x0 0x1c00>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; - - sysctrl: system-controller@0 { - compatible = "amlogic,meson-axg-hhi-sysctrl", - "simple-mfd", "syscon"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - compatible = "amlogic,axg-clkc"; - #clock-cells = <1>; - clocks = <&xtal>; - clock-names = "xtal"; - }; - - pwrc: power-controller { - compatible = "amlogic,meson-axg-pwrc"; - #power-domain-cells = <1>; - amlogic,ao-sysctrl = <&sysctrl_AO>; - resets = <&reset RESET_VIU>, - <&reset RESET_VENC>, - <&reset RESET_VCBUS>, - <&reset RESET_VENCL>, - <&reset RESET_VID_LOCK>; - reset-names = "viu", "venc", "vcbus", - "vencl", "vid_lock"; - clocks = <&clkc CLKID_VPU>, - <&clkc CLKID_VAPB>; - clock-names = "vpu", "vapb"; - /* - * VPU clocking is provided by two identical clock paths - * VPU_0 and VPU_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - * Same for VAPB but with a final gate after the glitch free mux. - */ - assigned-clocks = <&clkc CLKID_VPU_0_SEL>, - <&clkc CLKID_VPU_0>, - <&clkc CLKID_VPU>, /* Glitch free mux */ - <&clkc CLKID_VAPB_0_SEL>, - <&clkc CLKID_VAPB_0>, - <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VPU_0>, - <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VAPB_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <250000000>, - <0>, /* Do Nothing */ - <0>, /* Do Nothing */ - <250000000>, - <0>; /* Do Nothing */ - }; - - mipi_pcie_analog_dphy: phy { - compatible = "amlogic,axg-mipi-pcie-analog-phy"; - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - mailbox: mailbox@ff63c404 { - compatible = "amlogic,meson-gxbb-mhu"; - reg = <0 0xff63c404 0 0x4c>; - interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; - #mbox-cells = <1>; - }; - - mipi_dphy: phy@ff640000 { - compatible = "amlogic,axg-mipi-dphy"; - reg = <0x0 0xff640000 0x0 0x100>; - clocks = <&clkc CLKID_MIPI_DSI_PHY>; - clock-names = "pclk"; - resets = <&reset RESET_MIPI_PHY>; - reset-names = "phy"; - phys = <&mipi_pcie_analog_dphy>; - phy-names = "analog"; - #phy-cells = <0>; - status = "disabled"; - }; - - audio: bus@ff642000 { - compatible = "simple-bus"; - reg = <0x0 0xff642000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - compatible = "amlogic,axg-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>; - amlogic,fifo-depth = <512>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>; - amlogic,fifo-depth = <512>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - arb: reset-controller@280 { - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - }; - - aobus: bus@ff800000 { - compatible = "simple-bus"; - reg = <0x0 0xff800000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; - - sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-axg-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; - }; - }; - - pinctrl_aobus: pinctrl@14 { - compatible = "amlogic,meson-axg-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x00014 0x0 0x8>, - <0x0 0x0002c 0x0 0x4>, - <0x0 0x00024 0x0 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 0 15>; - }; - - i2c_ao_sck_4_pins: i2c_ao_sck_4 { - mux { - groups = "i2c_ao_sck_4"; - function = "i2c_ao"; - bias-disable; - }; - }; - - i2c_ao_sck_8_pins: i2c_ao_sck_8 { - mux { - groups = "i2c_ao_sck_8"; - function = "i2c_ao"; - bias-disable; - }; - }; - - i2c_ao_sck_10_pins: i2c_ao_sck_10 { - mux { - groups = "i2c_ao_sck_10"; - function = "i2c_ao"; - bias-disable; - }; - }; - - i2c_ao_sda_5_pins: i2c_ao_sda_5 { - mux { - groups = "i2c_ao_sda_5"; - function = "i2c_ao"; - bias-disable; - }; - }; - - i2c_ao_sda_9_pins: i2c_ao_sda_9 { - mux { - groups = "i2c_ao_sda_9"; - function = "i2c_ao"; - bias-disable; - }; - }; - - i2c_ao_sda_11_pins: i2c_ao_sda_11 { - mux { - groups = "i2c_ao_sda_11"; - function = "i2c_ao"; - bias-disable; - }; - }; - - remote_input_ao_pins: remote_input_ao { - mux { - groups = "remote_input_ao"; - function = "remote_input_ao"; - bias-disable; - }; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_ao_tx_a", - "uart_ao_rx_a"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { - mux { - groups = "uart_ao_cts_a", - "uart_ao_rts_a"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_b_pins: uart_ao_b { - mux { - groups = "uart_ao_tx_b", - "uart_ao_rx_b"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { - mux { - groups = "uart_ao_cts_b", - "uart_ao_rts_b"; - function = "uart_ao_b"; - bias-disable; - }; - }; - }; - - sec_AO: ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; - }; - - pwm_AO_cd: pwm@2000 { - compatible = "amlogic,meson-axg-ao-pwm"; - reg = <0x0 0x02000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; - reg = <0x0 0x3000 0x0 0x18>; - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; - reg = <0x0 0x4000 0x0 0x18>; - interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - i2c_AO: i2c@5000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x05000 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_AO_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm_AO_ab: pwm@7000 { - compatible = "amlogic,meson-axg-ao-pwm"; - reg = <0x0 0x07000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - ir: ir@8000 { - compatible = "amlogic,meson-gxbb-ir"; - reg = <0x0 0x8000 0x0 0x20>; - interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - saradc: adc@9000 { - compatible = "amlogic,meson-axg-saradc", - "amlogic,meson-saradc"; - reg = <0x0 0x9000 0x0 0x38>; - #io-channel-cells = <1>; - interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, - <&clkc_AO CLKID_AO_SAR_ADC>, - <&clkc_AO CLKID_AO_SAR_ADC_CLK>, - <&clkc_AO CLKID_AO_SAR_ADC_SEL>; - clock-names = "clkin", "core", "adc_clk", "adc_sel"; - status = "disabled"; - }; - }; - - ge2d: ge2d@ff940000 { - compatible = "amlogic,axg-ge2d"; - reg = <0x0 0xff940000 0x0 0x10000>; - interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_VAPB>; - resets = <&reset RESET_GE2D>; - }; - - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - reg = <0x0 0xffc01000 0 0x1000>, - <0x0 0xffc02000 0 0x2000>, - <0x0 0xffc04000 0 0x2000>, - <0x0 0xffc06000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - cbus: bus@ffd00000 { - compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x25000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; - - reset: reset-controller@1004 { - compatible = "amlogic,meson-axg-reset"; - reg = <0x0 0x01004 0x0 0x9c>; - #reset-cells = <1>; - }; - - gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-axg-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0xf080 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - }; - - watchdog@f0d0 { - compatible = "amlogic,meson-gxbb-wdt"; - reg = <0x0 0xf0d0 0x0 0x10>; - clocks = <&xtal>; - }; - - pwm_ab: pwm@1b000 { - compatible = "amlogic,meson-axg-ee-pwm"; - reg = <0x0 0x1b000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@1a000 { - compatible = "amlogic,meson-axg-ee-pwm"; - reg = <0x0 0x1a000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - spicc0: spi@13000 { - compatible = "amlogic,meson-axg-spicc"; - reg = <0x0 0x13000 0x0 0x3c>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_SPICC0>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spicc1: spi@15000 { - compatible = "amlogic,meson-axg-spicc"; - reg = <0x0 0x15000 0x0 0x3c>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_SPICC1>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - clk_msr: clock-measure@18000 { - compatible = "amlogic,meson-axg-clk-measure"; - reg = <0x0 0x18000 0x0 0x10>; - }; - - i2c3: i2c@1c000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1c000 0x0 0x20>; - interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@1d000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1d000 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@1e000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1e000 0x0 0x20>; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@1f000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1f000 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x18>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - }; - - uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - fifo-size = <128>; - }; - }; - - apb: bus@ffe00000 { - compatible = "simple-bus"; - reg = <0x0 0xffe00000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; - - sd_emmc_b: sd@5000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x5000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; - }; - - sd_emmc_c: mmc@7000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x7000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; - }; - - usb2_phy1: phy@9020 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x9020 0x0 0x20>; - clocks = <&clkc CLKID_USB>; - clock-names = "phy"; - resets = <&reset RESET_USB_OTG>; - reset-names = "phy"; - }; - }; - - sram: sram@fffc0000 { - compatible = "mmio-sram"; - reg = <0x0 0xfffc0000 0x0 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0xfffc0000 0x20000>; - - cpu_scp_lpri: scp-sram@13000 { - compatible = "amlogic,meson-axg-scp-shmem"; - reg = <0x13000 0x400>; - }; - - cpu_scp_hpri: scp-sram@13400 { - compatible = "amlogic,meson-axg-scp-shmem"; - reg = <0x13400 0x400>; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; -}; diff --git a/arch/arm/dts/meson-g12-common.dtsi b/arch/arm/dts/meson-g12-common.dtsi deleted file mode 100644 index 9dbd50820b1..00000000000 --- a/arch/arm/dts/meson-g12-common.dtsi +++ /dev/null @@ -1,2493 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Amlogic, Inc. All rights reserved. - */ - -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/g12a-clkc.h> -#include <dt-bindings/clock/g12a-aoclkc.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/amlogic,meson-g12a-reset.h> -#include <dt-bindings/thermal/thermal.h> - -/ { - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - mmc0 = &sd_emmc_b; /* SD card */ - mmc1 = &sd_emmc_c; /* eMMC */ - mmc2 = &sd_emmc_a; /* SDIO */ - }; - - chosen { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - simplefb_cvbs: framebuffer-cvbs { - compatible = "amlogic,simple-framebuffer", - "simple-framebuffer"; - amlogic,pipeline = "vpu-cvbs"; - clocks = <&clkc CLKID_HDMI>, - <&clkc CLKID_HTX_PCLK>, - <&clkc CLKID_VPU_INTR>; - status = "disabled"; - }; - - simplefb_hdmi: framebuffer-hdmi { - compatible = "amlogic,simple-framebuffer", - "simple-framebuffer"; - amlogic,pipeline = "vpu-hdmi"; - clocks = <&clkc CLKID_HDMI>, - <&clkc CLKID_HTX_PCLK>, - <&clkc CLKID_VPU_INTR>; - status = "disabled"; - }; - }; - - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - clocks = <&clkc CLKID_EFUSE>; - #address-cells = <1>; - #size-cells = <1>; - read-only; - secure-monitor = <&sm>; - }; - - gpu_opp_table: opp-table-gpu { - compatible = "operating-points-v2"; - - opp-124999998 { - opp-hz = /bits/ 64 <124999998>; - opp-microvolt = <800000>; - }; - opp-249999996 { - opp-hz = /bits/ 64 <249999996>; - opp-microvolt = <800000>; - }; - opp-285714281 { - opp-hz = /bits/ 64 <285714281>; - opp-microvolt = <800000>; - }; - opp-399999994 { - opp-hz = /bits/ 64 <399999994>; - opp-microvolt = <800000>; - }; - opp-499999992 { - opp-hz = /bits/ 64 <499999992>; - opp-microvolt = <800000>; - }; - opp-666666656 { - opp-hz = /bits/ 64 <666666656>; - opp-microvolt = <800000>; - }; - opp-799999987 { - opp-hz = /bits/ 64 <799999987>; - opp-microvolt = <800000>; - }; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - - /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ - secmon_reserved_bl32: secmon@5300000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x0 0x10000000>; - alignment = <0x0 0x400000>; - linux,cma-default; - }; - }; - - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - pcie: pcie@fc000000 { - compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; - reg = <0x0 0xfc000000 0x0 0x400000>, - <0x0 0xff648000 0x0 0x2000>, - <0x0 0xfc400000 0x0 0x200000>; - reg-names = "elbi", "cfg", "config"; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - bus-range = <0x0 0xff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>, - <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; - - clocks = <&clkc CLKID_PCIE_PHY - &clkc CLKID_PCIE_COMB - &clkc CLKID_PCIE_PLL>; - clock-names = "general", - "pclk", - "port"; - resets = <&reset RESET_PCIE_CTRL_A>, - <&reset RESET_PCIE_APB>; - reset-names = "port", - "apb"; - num-lanes = <1>; - phys = <&usb3_pcie_phy PHY_TYPE_PCIE>; - phy-names = "pcie"; - status = "disabled"; - }; - - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-g12a-dwmac", - "snps,dwmac-3.70a", - "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000>, - <0x0 0xff634540 0x0 0x8>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "stmmaceth", "clkin0", "clkin1", - "timing-adjustment"; - rx-fifo-depth = <4096>; - tx-fifo-depth = <2048>; - status = "disabled"; - - mdio0: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - }; - - apb: bus@ff600000 { - compatible = "simple-bus"; - reg = <0x0 0xff600000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; - - hdmi_tx: hdmi-tx@0 { - compatible = "amlogic,meson-g12a-dw-hdmi"; - reg = <0x0 0x0 0x0 0x10000>; - interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMITX_PHY>, - <&reset RESET_HDMITX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI>, - <&clkc CLKID_HTX_PCLK>, - <&clkc CLKID_VPU_INTR>; - clock-names = "isfr", "iahb", "venci"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <0>; - status = "disabled"; - - /* VPU VENC Input */ - hdmi_tx_venc_port: port@0 { - reg = <0>; - - hdmi_tx_in: endpoint { - remote-endpoint = <&hdmi_tx_out>; - }; - }; - - /* TMDS Output */ - hdmi_tx_tmds_port: port@1 { - reg = <1>; - }; - }; - - apb_efuse: bus@30000 { - compatible = "simple-bus"; - reg = <0x0 0x30000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; - - hwrng: rng@218 { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x218 0x0 0x4>; - clocks = <&clkc CLKID_RNG0>; - clock-names = "core"; - }; - }; - - acodec: audio-controller@32000 { - compatible = "amlogic,t9015"; - reg = <0x0 0x32000 0x0 0x14>; - #sound-dai-cells = <0>; - sound-name-prefix = "ACODEC"; - clocks = <&clkc CLKID_AUDIO_CODEC>; - clock-names = "pclk"; - resets = <&reset RESET_AUDIO_CODEC>; - status = "disabled"; - }; - - periphs: bus@34400 { - compatible = "simple-bus"; - reg = <0x0 0x34400 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; - - periphs_pinctrl: pinctrl@40 { - compatible = "amlogic,meson-g12a-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@40 { - reg = <0x0 0x40 0x0 0x4c>, - <0x0 0xe8 0x0 0x18>, - <0x0 0x120 0x0 0x18>, - <0x0 0x2c0 0x0 0x40>, - <0x0 0x340 0x0 0x1c>; - reg-names = "gpio", - "pull", - "pull-enable", - "mux", - "ds"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&periphs_pinctrl 0 0 86>; - }; - - cec_ao_a_h_pins: cec_ao_a_h { - mux { - groups = "cec_ao_a_h"; - function = "cec_ao_a_h"; - bias-disable; - }; - }; - - cec_ao_b_h_pins: cec_ao_b_h { - mux { - groups = "cec_ao_b_h"; - function = "cec_ao_b_h"; - bias-disable; - }; - }; - - emmc_ctrl_pins: emmc-ctrl { - mux-0 { - groups = "emmc_cmd"; - function = "emmc"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "emmc_clk"; - function = "emmc"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - emmc_data_4b_pins: emmc-data-4b { - mux-0 { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3"; - function = "emmc"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - }; - - emmc_data_8b_pins: emmc-data-8b { - mux-0 { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7"; - function = "emmc"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - }; - - emmc_ds_pins: emmc-ds { - mux { - groups = "emmc_nand_ds"; - function = "emmc"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - emmc_clk_gate_pins: emmc_clk_gate { - mux { - groups = "BOOT_8"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - hdmitx_ddc_pins: hdmitx_ddc { - mux { - groups = "hdmitx_sda", - "hdmitx_sck"; - function = "hdmitx"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - hdmitx_hpd_pins: hdmitx_hpd { - mux { - groups = "hdmitx_hpd_in"; - function = "hdmitx"; - bias-disable; - }; - }; - - - i2c0_sda_c_pins: i2c0-sda-c { - mux { - groups = "i2c0_sda_c"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - - }; - }; - - i2c0_sck_c_pins: i2c0-sck-c { - mux { - groups = "i2c0_sck_c"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z0_pins: i2c0-sda-z0 { - mux { - groups = "i2c0_sda_z0"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sck_z1_pins: i2c0-sck-z1 { - mux { - groups = "i2c0_sck_z1"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z7_pins: i2c0-sda-z7 { - mux { - groups = "i2c0_sda_z7"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z8_pins: i2c0-sda-z8 { - mux { - groups = "i2c0_sda_z8"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_x_pins: i2c1-sda-x { - mux { - groups = "i2c1_sda_x"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_x_pins: i2c1-sck-x { - mux { - groups = "i2c1_sck_x"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_h2_pins: i2c1-sda-h2 { - mux { - groups = "i2c1_sda_h2"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_h3_pins: i2c1-sck-h3 { - mux { - groups = "i2c1_sck_h3"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_h6_pins: i2c1-sda-h6 { - mux { - groups = "i2c1_sda_h6"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_h7_pins: i2c1-sck-h7 { - mux { - groups = "i2c1_sck_h7"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sda_x_pins: i2c2-sda-x { - mux { - groups = "i2c2_sda_x"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sck_x_pins: i2c2-sck-x { - mux { - groups = "i2c2_sck_x"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sda_z_pins: i2c2-sda-z { - mux { - groups = "i2c2_sda_z"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sck_z_pins: i2c2-sck-z { - mux { - groups = "i2c2_sck_z"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sda_h_pins: i2c3-sda-h { - mux { - groups = "i2c3_sda_h"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sck_h_pins: i2c3-sck-h { - mux { - groups = "i2c3_sck_h"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sda_a_pins: i2c3-sda-a { - mux { - groups = "i2c3_sda_a"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sck_a_pins: i2c3-sck-a { - mux { - groups = "i2c3_sck_a"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk0_a_pins: mclk0-a { - mux { - groups = "mclk0_a"; - function = "mclk0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_a_pins: mclk1-a { - mux { - groups = "mclk1_a"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_x_pins: mclk1-x { - mux { - groups = "mclk1_x"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_z_pins: mclk1-z { - mux { - groups = "mclk1_z"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - nor_pins: nor { - mux { - groups = "nor_d", - "nor_q", - "nor_c", - "nor_cs"; - function = "nor"; - bias-disable; - }; - }; - - pdm_din0_a_pins: pdm-din0-a { - mux { - groups = "pdm_din0_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_c_pins: pdm-din0-c { - mux { - groups = "pdm_din0_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_x_pins: pdm-din0-x { - mux { - groups = "pdm_din0_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_z_pins: pdm-din0-z { - mux { - groups = "pdm_din0_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_a_pins: pdm-din1-a { - mux { - groups = "pdm_din1_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_c_pins: pdm-din1-c { - mux { - groups = "pdm_din1_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_x_pins: pdm-din1-x { - mux { - groups = "pdm_din1_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_z_pins: pdm-din1-z { - mux { - groups = "pdm_din1_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_a_pins: pdm-din2-a { - mux { - groups = "pdm_din2_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_c_pins: pdm-din2-c { - mux { - groups = "pdm_din2_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_x_pins: pdm-din2-x { - mux { - groups = "pdm_din2_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_z_pins: pdm-din2-z { - mux { - groups = "pdm_din2_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_a_pins: pdm-din3-a { - mux { - groups = "pdm_din3_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_c_pins: pdm-din3-c { - mux { - groups = "pdm_din3_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_x_pins: pdm-din3-x { - mux { - groups = "pdm_din3_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_z_pins: pdm-din3-z { - mux { - groups = "pdm_din3_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_dclk_a_pins: pdm-dclk-a { - mux { - groups = "pdm_dclk_a"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_c_pins: pdm-dclk-c { - mux { - groups = "pdm_dclk_c"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_x_pins: pdm-dclk-x { - mux { - groups = "pdm_dclk_x"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_z_pins: pdm-dclk-z { - mux { - groups = "pdm_dclk_z"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pwm_a_pins: pwm-a { - mux { - groups = "pwm_a"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_b_x7_pins: pwm-b-x7 { - mux { - groups = "pwm_b_x7"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_b_x19_pins: pwm-b-x19 { - mux { - groups = "pwm_b_x19"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_c_c_pins: pwm-c-c { - mux { - groups = "pwm_c_c"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x5_pins: pwm-c-x5 { - mux { - groups = "pwm_c_x5"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x8_pins: pwm-c-x8 { - mux { - groups = "pwm_c_x8"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_d_x3_pins: pwm-d-x3 { - mux { - groups = "pwm_d_x3"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_d_x6_pins: pwm-d-x6 { - mux { - groups = "pwm_d_x6"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_e_pins: pwm-e { - mux { - groups = "pwm_e"; - function = "pwm_e"; - bias-disable; - }; - }; - - pwm_f_z_pins: pwm-f-z { - mux { - groups = "pwm_f_z"; - function = "pwm_f"; - bias-disable; - }; - }; - - pwm_f_a_pins: pwm-f-a { - mux { - groups = "pwm_f_a"; - function = "pwm_f"; - bias-disable; - }; - }; - - pwm_f_x_pins: pwm-f-x { - mux { - groups = "pwm_f_x"; - function = "pwm_f"; - bias-disable; - }; - }; - - pwm_f_h_pins: pwm-f-h { - mux { - groups = "pwm_f_h"; - function = "pwm_f"; - bias-disable; - }; - }; - - sdcard_c_pins: sdcard_c { - mux-0 { - groups = "sdcard_d0_c", - "sdcard_d1_c", - "sdcard_d2_c", - "sdcard_d3_c", - "sdcard_cmd_c"; - function = "sdcard"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "sdcard_clk_c"; - function = "sdcard"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_clk_gate_c_pins: sdcard_clk_gate_c { - mux { - groups = "GPIOC_4"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_z_pins: sdcard_z { - mux-0 { - groups = "sdcard_d0_z", - "sdcard_d1_z", - "sdcard_d2_z", - "sdcard_d3_z", - "sdcard_cmd_z"; - function = "sdcard"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "sdcard_clk_z"; - function = "sdcard"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_clk_gate_z_pins: sdcard_clk_gate_z { - mux { - groups = "GPIOZ_6"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - sdio_pins: sdio { - mux { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_clk", - "sdio_cmd"; - function = "sdio"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdio_clk_gate_pins: sdio_clk_gate { - mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - spdif_in_a10_pins: spdif-in-a10 { - mux { - groups = "spdif_in_a10"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a12_pins: spdif-in-a12 { - mux { - groups = "spdif_in_a12"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_h_pins: spdif-in-h { - mux { - groups = "spdif_in_h"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_out_h_pins: spdif-out-h { - mux { - groups = "spdif_out_h"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - spdif_out_a11_pins: spdif-out-a11 { - mux { - groups = "spdif_out_a11"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - spdif_out_a13_pins: spdif-out-a13 { - mux { - groups = "spdif_out_a13"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - spicc0_x_pins: spicc0-x { - mux { - groups = "spi0_mosi_x", - "spi0_miso_x", - "spi0_clk_x"; - function = "spi0"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - spicc0_ss0_x_pins: spicc0-ss0-x { - mux { - groups = "spi0_ss0_x"; - function = "spi0"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - spicc0_c_pins: spicc0-c { - mux { - groups = "spi0_mosi_c", - "spi0_miso_c", - "spi0_ss0_c", - "spi0_clk_c"; - function = "spi0"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - spicc1_pins: spicc1 { - mux { - groups = "spi1_mosi", - "spi1_miso", - "spi1_clk"; - function = "spi1"; - drive-strength-microamp = <4000>; - }; - }; - - spicc1_ss0_pins: spicc1-ss0 { - mux { - groups = "spi1_ss0"; - function = "spi1"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - tdm_a_din0_pins: tdm-a-din0 { - mux { - groups = "tdm_a_din0"; - function = "tdm_a"; - bias-disable; - }; - }; - - - tdm_a_din1_pins: tdm-a-din1 { - mux { - groups = "tdm_a_din1"; - function = "tdm_a"; - bias-disable; - }; - }; - - tdm_a_dout0_pins: tdm-a-dout0 { - mux { - groups = "tdm_a_dout0"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_dout1_pins: tdm-a-dout1 { - mux { - groups = "tdm_a_dout1"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_fs_pins: tdm-a-fs { - mux { - groups = "tdm_a_fs"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_sclk_pins: tdm-a-sclk { - mux { - groups = "tdm_a_sclk"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_slv_fs_pins: tdm-a-slv-fs { - mux { - groups = "tdm_a_slv_fs"; - function = "tdm_a"; - bias-disable; - }; - }; - - - tdm_a_slv_sclk_pins: tdm-a-slv-sclk { - mux { - groups = "tdm_a_slv_sclk"; - function = "tdm_a"; - bias-disable; - }; - }; - - tdm_b_din0_pins: tdm-b-din0 { - mux { - groups = "tdm_b_din0"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din1_pins: tdm-b-din1 { - mux { - groups = "tdm_b_din1"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din2_pins: tdm-b-din2 { - mux { - groups = "tdm_b_din2"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din3_a_pins: tdm-b-din3-a { - mux { - groups = "tdm_b_din3_a"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din3_h_pins: tdm-b-din3-h { - mux { - groups = "tdm_b_din3_h"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_dout0_pins: tdm-b-dout0 { - mux { - groups = "tdm_b_dout0"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout1_pins: tdm-b-dout1 { - mux { - groups = "tdm_b_dout1"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout2_pins: tdm-b-dout2 { - mux { - groups = "tdm_b_dout2"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout3_a_pins: tdm-b-dout3-a { - mux { - groups = "tdm_b_dout3_a"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout3_h_pins: tdm-b-dout3-h { - mux { - groups = "tdm_b_dout3_h"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_fs_pins: tdm-b-fs { - mux { - groups = "tdm_b_fs"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_sclk_pins: tdm-b-sclk { - mux { - groups = "tdm_b_sclk"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_slv_fs_pins: tdm-b-slv-fs { - mux { - groups = "tdm_b_slv_fs"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_slv_sclk_pins: tdm-b-slv-sclk { - mux { - groups = "tdm_b_slv_sclk"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_c_din0_a_pins: tdm-c-din0-a { - mux { - groups = "tdm_c_din0_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din0_z_pins: tdm-c-din0-z { - mux { - groups = "tdm_c_din0_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din1_a_pins: tdm-c-din1-a { - mux { - groups = "tdm_c_din1_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din1_z_pins: tdm-c-din1-z { - mux { - groups = "tdm_c_din1_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din2_a_pins: tdm-c-din2-a { - mux { - groups = "tdm_c_din2_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - eth_leds_pins: eth-leds { - mux { - groups = "eth_link_led", - "eth_act_led"; - function = "eth"; - bias-disable; - }; - }; - - eth_pins: eth { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_rgmii_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_txen", - "eth_txd0", - "eth_txd1"; - function = "eth"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - eth_rgmii_pins: eth-rgmii { - mux { - groups = "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - tdm_c_din2_z_pins: tdm-c-din2-z { - mux { - groups = "tdm_c_din2_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din3_a_pins: tdm-c-din3-a { - mux { - groups = "tdm_c_din3_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din3_z_pins: tdm-c-din3-z { - mux { - groups = "tdm_c_din3_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_dout0_a_pins: tdm-c-dout0-a { - mux { - groups = "tdm_c_dout0_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout0_z_pins: tdm-c-dout0-z { - mux { - groups = "tdm_c_dout0_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout1_a_pins: tdm-c-dout1-a { - mux { - groups = "tdm_c_dout1_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout1_z_pins: tdm-c-dout1-z { - mux { - groups = "tdm_c_dout1_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout2_a_pins: tdm-c-dout2-a { - mux { - groups = "tdm_c_dout2_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout2_z_pins: tdm-c-dout2-z { - mux { - groups = "tdm_c_dout2_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout3_a_pins: tdm-c-dout3-a { - mux { - groups = "tdm_c_dout3_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout3_z_pins: tdm-c-dout3-z { - mux { - groups = "tdm_c_dout3_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_fs_a_pins: tdm-c-fs-a { - mux { - groups = "tdm_c_fs_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_fs_z_pins: tdm-c-fs-z { - mux { - groups = "tdm_c_fs_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_sclk_a_pins: tdm-c-sclk-a { - mux { - groups = "tdm_c_sclk_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_sclk_z_pins: tdm-c-sclk-z { - mux { - groups = "tdm_c_sclk_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { - mux { - groups = "tdm_c_slv_fs_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { - mux { - groups = "tdm_c_slv_fs_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { - mux { - groups = "tdm_c_slv_sclk_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { - mux { - groups = "tdm_c_slv_sclk_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - uart_a_pins: uart-a { - mux { - groups = "uart_a_tx", - "uart_a_rx"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_a_cts_rts_pins: uart-a-cts-rts { - mux { - groups = "uart_a_cts", - "uart_a_rts"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_b_pins: uart-b { - mux { - groups = "uart_b_tx", - "uart_b_rx"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_c_pins: uart-c { - mux { - groups = "uart_c_tx", - "uart_c_rx"; - function = "uart_c"; - bias-disable; - }; - }; - - uart_c_cts_rts_pins: uart-c-cts-rts { - mux { - groups = "uart_c_cts", - "uart_c_rts"; - function = "uart_c"; - bias-disable; - }; - }; - }; - }; - - cpu_temp: temperature-sensor@34800 { - compatible = "amlogic,g12a-cpu-thermal", - "amlogic,g12a-thermal"; - reg = <0x0 0x34800 0x0 0x50>; - interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_TS>; - #thermal-sensor-cells = <0>; - amlogic,ao-secure = <&sec_AO>; - }; - - ddr_temp: temperature-sensor@34c00 { - compatible = "amlogic,g12a-ddr-thermal", - "amlogic,g12a-thermal"; - reg = <0x0 0x34c00 0x0 0x50>; - interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_TS>; - #thermal-sensor-cells = <0>; - amlogic,ao-secure = <&sec_AO>; - }; - - usb2_phy0: phy@36000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x36000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY20>; - reset-names = "phy"; - #phy-cells = <0>; - }; - - dmc: bus@38000 { - compatible = "simple-bus"; - reg = <0x0 0x38000 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; - - canvas: video-lut@48 { - compatible = "amlogic,canvas"; - reg = <0x0 0x48 0x0 0x14>; - }; - }; - - usb2_phy1: phy@3a000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x3a000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY21>; - reset-names = "phy"; - #phy-cells = <0>; - }; - - hiu: bus@3c000 { - compatible = "simple-bus"; - reg = <0x0 0x3c000 0x0 0x1400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; - - hhi: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", - "simple-mfd", "syscon"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - compatible = "amlogic,g12a-clkc"; - #clock-cells = <1>; - clocks = <&xtal>; - clock-names = "xtal"; - }; - - pwrc: power-controller { - compatible = "amlogic,meson-g12a-pwrc"; - #power-domain-cells = <1>; - amlogic,ao-sysctrl = <&rti>; - resets = <&reset RESET_VIU>, - <&reset RESET_VENC>, - <&reset RESET_VCBUS>, - <&reset RESET_BT656>, - <&reset RESET_RDMA>, - <&reset RESET_VENCI>, - <&reset RESET_VENCP>, - <&reset RESET_VDAC>, - <&reset RESET_VDI6>, - <&reset RESET_VENCL>, - <&reset RESET_VID_LOCK>; - reset-names = "viu", "venc", "vcbus", "bt656", - "rdma", "venci", "vencp", "vdac", - "vdi6", "vencl", "vid_lock"; - clocks = <&clkc CLKID_VPU>, - <&clkc CLKID_VAPB>; - clock-names = "vpu", "vapb"; - /* - * VPU clocking is provided by two identical clock paths - * VPU_0 and VPU_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - * Same for VAPB but with a final gate after the glitch free mux. - */ - assigned-clocks = <&clkc CLKID_VPU_0_SEL>, - <&clkc CLKID_VPU_0>, - <&clkc CLKID_VPU>, /* Glitch free mux */ - <&clkc CLKID_VAPB_0_SEL>, - <&clkc CLKID_VAPB_0>, - <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_VPU_0>, - <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VAPB_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>, /* Do Nothing */ - <0>, /* Do Nothing */ - <250000000>, - <0>; /* Do Nothing */ - }; - }; - }; - - usb3_pcie_phy: phy@46000 { - compatible = "amlogic,g12a-usb3-pcie-phy"; - reg = <0x0 0x46000 0x0 0x2000>; - clocks = <&clkc CLKID_PCIE_PLL>; - clock-names = "ref_clk"; - resets = <&reset RESET_PCIE_PHY>; - reset-names = "phy"; - assigned-clocks = <&clkc CLKID_PCIE_PLL>; - assigned-clock-rates = <100000000>; - #phy-cells = <1>; - }; - - eth_phy: mdio-multiplexer@4c000 { - compatible = "amlogic,g12a-mdio-mux"; - reg = <0x0 0x4c000 0x0 0xa4>; - clocks = <&clkc CLKID_ETH_PHY>, - <&xtal>, - <&clkc CLKID_MPLL_50M>; - clock-names = "pclk", "clkin0", "clkin1"; - mdio-parent-bus = <&mdio0>; - #address-cells = <1>; - #size-cells = <0>; - - ext_mdio: mdio@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - int_mdio: mdio@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - internal_ephy: ethernet_phy@8 { - compatible = "ethernet-phy-id0180.3301", - "ethernet-phy-ieee802.3-c22"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <8>; - max-speed = <100>; - }; - }; - }; - }; - - pmu: pmu@ff638000 { - reg = <0x0 0xff638000 0x0 0x100>, - <0x0 0xff638c00 0x0 0x100>; - interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>; - }; - - aobus: bus@ff800000 { - compatible = "simple-bus"; - reg = <0x0 0xff800000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; - - rti: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", - "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-g12a-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; - }; - - ao_pinctrl: pinctrl@14 { - compatible = "amlogic,meson-g12a-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x14 0x0 0x8>, - <0x0 0x1c 0x0 0x8>, - <0x0 0x24 0x0 0x14>; - reg-names = "mux", - "ds", - "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ao_pinctrl 0 0 15>; - }; - - i2c_ao_sck_pins: i2c_ao_sck_pins { - mux { - groups = "i2c_ao_sck"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sda_pins: i2c_ao_sda { - mux { - groups = "i2c_ao_sda"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sck_e_pins: i2c_ao_sck_e { - mux { - groups = "i2c_ao_sck_e"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sda_e_pins: i2c_ao_sda_e { - mux { - groups = "i2c_ao_sda_e"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk0_ao_pins: mclk0-ao { - mux { - groups = "mclk0_ao"; - function = "mclk0_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_din0_pins: tdm-ao-b-din0 { - mux { - groups = "tdm_ao_b_din0"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - spdif_ao_out_pins: spdif-ao-out { - mux { - groups = "spdif_ao_out"; - function = "spdif_ao_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - tdm_ao_b_din1_pins: tdm-ao-b-din1 { - mux { - groups = "tdm_ao_b_din1"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_din2_pins: tdm-ao-b-din2 { - mux { - groups = "tdm_ao_b_din2"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { - mux { - groups = "tdm_ao_b_dout0"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { - mux { - groups = "tdm_ao_b_dout1"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { - mux { - groups = "tdm_ao_b_dout2"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_fs_pins: tdm-ao-b-fs { - mux { - groups = "tdm_ao_b_fs"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_sclk_pins: tdm-ao-b-sclk { - mux { - groups = "tdm_ao_b_sclk"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { - mux { - groups = "tdm_ao_b_slv_fs"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { - mux { - groups = "tdm_ao_b_slv_sclk"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - uart_ao_a_pins: uart-a-ao { - mux { - groups = "uart_ao_a_tx", - "uart_ao_a_rx"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { - mux { - groups = "uart_ao_a_cts", - "uart_ao_a_rts"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_b_2_3_pins: uart-ao-b-2-3 { - mux { - groups = "uart_ao_b_tx_2", - "uart_ao_b_rx_3"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - uart_ao_b_8_9_pins: uart-ao-b-8-9 { - mux { - groups = "uart_ao_b_tx_8", - "uart_ao_b_rx_9"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts { - mux { - groups = "uart_ao_b_cts", - "uart_ao_b_rts"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - pwm_a_e_pins: pwm-a-e { - mux { - groups = "pwm_a_e"; - function = "pwm_a_e"; - bias-disable; - }; - }; - - pwm_ao_a_pins: pwm-ao-a { - mux { - groups = "pwm_ao_a"; - function = "pwm_ao_a"; - bias-disable; - }; - }; - - pwm_ao_b_pins: pwm-ao-b { - mux { - groups = "pwm_ao_b"; - function = "pwm_ao_b"; - bias-disable; - }; - }; - - pwm_ao_c_4_pins: pwm-ao-c-4 { - mux { - groups = "pwm_ao_c_4"; - function = "pwm_ao_c"; - bias-disable; - }; - }; - - pwm_ao_c_6_pins: pwm-ao-c-6 { - mux { - groups = "pwm_ao_c_6"; - function = "pwm_ao_c"; - bias-disable; - }; - }; - - pwm_ao_d_5_pins: pwm-ao-d-5 { - mux { - groups = "pwm_ao_d_5"; - function = "pwm_ao_d"; - bias-disable; - }; - }; - - pwm_ao_d_10_pins: pwm-ao-d-10 { - mux { - groups = "pwm_ao_d_10"; - function = "pwm_ao_d"; - bias-disable; - }; - }; - - pwm_ao_d_e_pins: pwm-ao-d-e { - mux { - groups = "pwm_ao_d_e"; - function = "pwm_ao_d"; - }; - }; - - remote_input_ao_pins: remote-input-ao { - mux { - groups = "remote_ao_input"; - function = "remote_ao_input"; - bias-disable; - }; - }; - }; - }; - - vrtc: rtc@a8 { - compatible = "amlogic,meson-vrtc"; - reg = <0x0 0x000a8 0x0 0x4>; - }; - - cec_AO: cec@100 { - compatible = "amlogic,meson-gx-ao-cec"; - reg = <0x0 0x00100 0x0 0x14>; - interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_AO CLKID_AO_CEC>; - clock-names = "core"; - status = "disabled"; - }; - - sec_AO: ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; - }; - - cecb_AO: cec@280 { - compatible = "amlogic,meson-g12a-ao-cec"; - reg = <0x0 0x00280 0x0 0x1c>; - interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; - clock-names = "oscin"; - status = "disabled"; - }; - - pwm_AO_cd: pwm@2000 { - compatible = "amlogic,meson-g12a-ao-pwm-cd"; - reg = <0x0 0x2000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x3000 0x0 0x18>; - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x4000 0x0 0x18>; - interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - i2c_AO: i2c@5000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x05000 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - pwm_AO_ab: pwm@7000 { - compatible = "amlogic,meson-g12a-ao-pwm-ab"; - reg = <0x0 0x7000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - ir: ir@8000 { - compatible = "amlogic,meson-gxbb-ir"; - reg = <0x0 0x8000 0x0 0x20>; - interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - saradc: adc@9000 { - compatible = "amlogic,meson-g12a-saradc", - "amlogic,meson-saradc"; - reg = <0x0 0x9000 0x0 0x48>; - #io-channel-cells = <1>; - interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, - <&clkc_AO CLKID_AO_SAR_ADC>, - <&clkc_AO CLKID_AO_SAR_ADC_CLK>, - <&clkc_AO CLKID_AO_SAR_ADC_SEL>; - clock-names = "clkin", "core", "adc_clk", "adc_sel"; - status = "disabled"; - }; - }; - - vdec: video-decoder@ff620000 { - compatible = "amlogic,g12a-vdec"; - reg = <0x0 0xff620000 0x0 0x10000>, - <0x0 0xffd0e180 0x0 0xe4>; - reg-names = "dos", "esparser"; - interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "vdec", "esparser"; - - amlogic,ao-sysctrl = <&rti>; - amlogic,canvas = <&canvas>; - - clocks = <&clkc CLKID_PARSER>, - <&clkc CLKID_DOS>, - <&clkc CLKID_VDEC_1>, - <&clkc CLKID_VDEC_HEVC>, - <&clkc CLKID_VDEC_HEVCF>; - clock-names = "dos_parser", "dos", "vdec_1", - "vdec_hevc", "vdec_hevcf"; - resets = <&reset RESET_PARSER>; - reset-names = "esparser"; - }; - - vpu: vpu@ff900000 { - compatible = "amlogic,meson-g12a-vpu"; - reg = <0x0 0xff900000 0x0 0x100000>, - <0x0 0xff63c000 0x0 0x1000>; - reg-names = "vpu", "hhi"; - interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - amlogic,canvas = <&canvas>; - - /* CVBS VDAC output port */ - cvbs_vdac_port: port@0 { - reg = <0>; - }; - - /* HDMI-TX output port */ - hdmi_tx_port: port@1 { - reg = <1>; - - hdmi_tx_out: endpoint { - remote-endpoint = <&hdmi_tx_in>; - }; - }; - }; - - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - reg = <0x0 0xffc01000 0 0x1000>, - <0x0 0xffc02000 0 0x2000>, - <0x0 0xffc04000 0 0x2000>, - <0x0 0xffc06000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - cbus: bus@ffd00000 { - compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; - - reset: reset-controller@1004 { - compatible = "amlogic,meson-axg-reset"; - reg = <0x0 0x1004 0x0 0x9c>; - #reset-cells = <1>; - }; - - gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-g12a-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0xf080 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - }; - - watchdog: watchdog@f0d0 { - compatible = "amlogic,meson-gxbb-wdt"; - reg = <0x0 0xf0d0 0x0 0x10>; - clocks = <&xtal>; - }; - - spicc0: spi@13000 { - compatible = "amlogic,meson-g12a-spicc"; - reg = <0x0 0x13000 0x0 0x44>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_SPICC0>, - <&clkc CLKID_SPICC0_SCLK>; - clock-names = "core", "pclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spicc1: spi@15000 { - compatible = "amlogic,meson-g12a-spicc"; - reg = <0x0 0x15000 0x0 0x44>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_SPICC1>, - <&clkc CLKID_SPICC1_SCLK>; - clock-names = "core", "pclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spifc: spi@14000 { - compatible = "amlogic,meson-gxbb-spifc"; - status = "disabled"; - reg = <0x0 0x14000 0x0 0x80>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_CLK81>; - }; - - pwm_ef: pwm@19000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x19000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@1a000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x1a000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_ab: pwm@1b000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x1b000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - i2c3: i2c@1c000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1c000 0x0 0x20>; - interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c2: i2c@1d000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1d000 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c1: i2c@1e000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1e000 0x0 0x20>; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c0: i2c@1f000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1f000 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - clk_msr: clock-measure@18000 { - compatible = "amlogic,meson-g12a-clk-measure"; - reg = <0x0 0x18000 0x0 0x10>; - }; - - uart_C: serial@22000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x22000 0x0 0x18>; - interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x18>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - fifo-size = <128>; - }; - }; - - sd_emmc_a: sd@ffe03000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe03000 0x0 0x800>; - interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_A>, - <&clkc CLKID_SD_EMMC_A_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_A>; - }; - - sd_emmc_b: sd@ffe05000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe05000 0x0 0x800>; - interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; - }; - - sd_emmc_c: mmc@ffe07000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe07000 0x0 0x800>; - interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; - }; - - usb: usb@ffe09000 { - status = "disabled"; - compatible = "amlogic,meson-g12a-usb-ctrl"; - reg = <0x0 0xffe09000 0x0 0xa0>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>; - resets = <&reset RESET_USB>; - - dr_mode = "otg"; - - phys = <&usb2_phy0>, <&usb2_phy1>, - <&usb3_pcie_phy PHY_TYPE_USB3>; - phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; - - dwc2: usb@ff400000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xff400000 0x0 0x40000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "otg"; - phys = <&usb2_phy1>; - phy-names = "usb2-phy"; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - - dwc3: usb@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,dis_u2_susphy_quirk; - snps,quirk-frame-length-adjustment = <0x20>; - snps,parkmode-disable-ss-quirk; - }; - }; - - mali: gpu@ffe40000 { - compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; - reg = <0x0 0xffe40000 0x0 0x40000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&clkc CLKID_MALI>; - resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; - operating-points-v2 = <&gpu_opp_table>; - #cooling-cells = <2>; - }; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay = <1000>; - polling-delay-passive = <100>; - thermal-sensors = <&cpu_temp>; - - trips { - cpu_passive: cpu-passive { - temperature = <85000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - cpu_hot: cpu-hot { - temperature = <95000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "hot"; - }; - - cpu_critical: cpu-critical { - temperature = <110000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - }; - - ddr_thermal: ddr-thermal { - polling-delay = <1000>; - polling-delay-passive = <100>; - thermal-sensors = <&ddr_temp>; - - trips { - ddr_passive: ddr-passive { - temperature = <85000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - ddr_critical: ddr-critical { - temperature = <110000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map { - trip = <&ddr_passive>; - cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - arm,no-tick-in-suspend; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; - -}; diff --git a/arch/arm/dts/meson-g12.dtsi b/arch/arm/dts/meson-g12.dtsi deleted file mode 100644 index 6a1f4dcf648..00000000000 --- a/arch/arm/dts/meson-g12.dtsi +++ /dev/null @@ -1,385 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Jerome Brunet <jbrunet@baylibre.com> - */ - -#include "meson-g12-common.dtsi" -#include <dt-bindings/clock/axg-audio-clkc.h> -#include <dt-bindings/power/meson-g12a-power.h> -#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> -#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> - -/ { - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; -}; - -&apb { - pdm: audio-controller@40000 { - compatible = "amlogic,g12a-pdm", - "amlogic,axg-pdm"; - reg = <0x0 0x40000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - resets = <&clkc_audio AUD_RESET_PDM>; - status = "disabled"; - }; - - audio: bus@42000 { - compatible = "simple-bus"; - reg = <0x0 0x42000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - status = "disabled"; - compatible = "amlogic,g12a-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - #reset-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>, - <&clkc_audio AUD_RESET_TODDR_A>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <512>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>, - <&clkc_audio AUD_RESET_TODDR_B>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>, - <&clkc_audio AUD_RESET_TODDR_C>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>, - <&clkc_audio AUD_RESET_FRDDR_A>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <512>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>, - <&clkc_audio AUD_RESET_FRDDR_B>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>, - <&clkc_audio AUD_RESET_FRDDR_C>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - arb: reset-controller@280 { - status = "disabled"; - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - resets = <&clkc_audio AUD_RESET_TDMIN_A>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - resets = <&clkc_audio AUD_RESET_TDMIN_B>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - resets = <&clkc_audio AUD_RESET_TDMIN_C>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - resets = <&clkc_audio AUD_RESET_TDMIN_LB>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", - "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - resets = <&clkc_audio AUD_RESET_SPDIFIN>; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - resets = <&clkc_audio AUD_RESET_SPDIFOUT>; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - resets = <&clkc_audio AUD_RESET_TDMOUT_A>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - resets = <&clkc_audio AUD_RESET_TDMOUT_B>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - resets = <&clkc_audio AUD_RESET_TDMOUT_C>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout_b: audio-controller@680 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x680 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT_B"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, - <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; - clock-names = "pclk", "mclk"; - resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>; - status = "disabled"; - }; - - toacodec: audio-controller@740 { - compatible = "amlogic,g12a-toacodec"; - reg = <0x0 0x740 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOACODEC"; - resets = <&clkc_audio AUD_RESET_TOACODEC>; - status = "disabled"; - }; - - tohdmitx: audio-controller@744 { - compatible = "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOHDMITX"; - resets = <&clkc_audio AUD_RESET_TOHDMITX>; - status = "disabled"; - }; - }; -}; - -ðmac { - power-domains = <&pwrc PWRC_G12A_ETH_ID>; -}; - -&vpu { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - -&sd_emmc_a { - amlogic,dram-access-quirk; -}; - -&simplefb_cvbs { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - -&simplefb_hdmi { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - diff --git a/arch/arm/dts/meson-g12a-radxa-zero.dts b/arch/arm/dts/meson-g12a-radxa-zero.dts deleted file mode 100644 index e3bb6df42ff..00000000000 --- a/arch/arm/dts/meson-g12a-radxa-zero.dts +++ /dev/null @@ -1,405 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 BayLibre SAS. All rights reserved. - */ - -/dts-v1/; - -#include "meson-g12a.dtsi" -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "radxa,zero", "amlogic,g12a"; - model = "Radxa Zero"; - - aliases { - serial0 = &uart_AO; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - cvbs-connector { - status = "disabled"; - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - hdmi_pw: regulator-hdmi_pw { - compatible = "regulator-fixed"; - regulator-name = "HDMI_PW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddcpu: regulator-vddcpu { - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&ao_5v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "RADXA-ZERO"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_pw>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "disabled"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr50; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <100000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; diff --git a/arch/arm/dts/meson-g12a-sei510.dts b/arch/arm/dts/meson-g12a-sei510.dts deleted file mode 100644 index 81269ccc249..00000000000 --- a/arch/arm/dts/meson-g12a-sei510.dts +++ /dev/null @@ -1,566 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre SAS. All rights reserved. - */ - -/dts-v1/; - -#include "meson-g12a.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "seirobotics,sei510", "amlogic,g12a"; - model = "SEI Robotics SEI510"; - - adc_keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - button-onoff { - label = "On/Off"; - linux,code = <KEY_POWER>; - press-threshold-microvolt = <1700000>; - }; - }; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - mono_dac: audio-codec-0 { - compatible = "maxim,max98357a"; - #sound-dai-cells = <0>; - sound-name-prefix = "U16"; - sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; - }; - - dmics: audio-codec-1 { - #sound-dai-cells = <0>; - compatible = "dmic-codec"; - num-channels = <2>; - wakeup-delay-ms = <50>; - status = "okay"; - sound-name-prefix = "MIC"; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - vddao_3v3_t: regultor-vddao_3v3_t { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3_T"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vddcpu: regulator-vddcpu { - /* - * SY8120B1ABC DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&dc_in>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddio_ao1v8: regulator-vddio_ao1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "SEI510"; - audio-aux-devs = <&tdmout_a>, <&tdmout_b>, - <&tdmin_a>, <&tdmin_b>; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", - "TDMOUT_A IN 1", "FRDDR_B OUT 0", - "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT", - "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TODDR_A IN 4", "PDM Capture", - "TODDR_B IN 4", "PDM Capture", - "TODDR_C IN 4", "PDM Capture", - "TDMIN_A IN 0", "TDM_A Capture", - "TDMIN_A IN 3", "TDM_A Loopback", - "TDMIN_B IN 0", "TDM_A Capture", - "TDMIN_B IN 3", "TDM_A Loopback", - "TDMIN_A IN 1", "TDM_B Capture", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 1", "TDM_B Capture", - "TDMIN_B IN 4", "TDM_B Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* internal speaker interface */ - dai-link-6 { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&mono_dac>; - }; - - codec-1 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - }; - - /* 8ch hdmi interface */ - dai-link-7 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* internal digital mics */ - dai-link-8 { - sound-dai = <&pdm>; - - codec { - sound-dai = <&dmics>; - }; - }; - - /* hdmi glue */ - dai-link-9 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - status = "okay"; - phy-handle = <&internal_ephy>; - phy-mode = "rmii"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; -}; - -&pdm { - pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>, - <&pdm_din2_z_pins>, <&pdm_din3_z_pins>, - <&pdm_dclk_z_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr50; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_ao1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - non-removable; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - -&tdmif_a { - pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; - pinctrl-names = "default"; - status = "okay"; - - assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, - <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; - assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - assigned-clock-rates = <0>, <0>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmout_a { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - vbat-supply = <&vddao_3v3>; - vddio-supply = <&vddio_ao1v8>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; diff --git a/arch/arm/dts/meson-g12a-u200.dts b/arch/arm/dts/meson-g12a-u200.dts deleted file mode 100644 index a26bfe72550..00000000000 --- a/arch/arm/dts/meson-g12a-u200.dts +++ /dev/null @@ -1,308 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Amlogic, Inc. All rights reserved. - */ - -/dts-v1/; - -#include "meson-g12a.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> - -/ { - compatible = "amlogic,u200", "amlogic,g12a"; - model = "Amlogic Meson G12A U200 Development Board"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - vddcpu: regulator-vddcpu { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - status = "okay"; - phy-handle = <&internal_ephy>; - phy-mode = "rmii"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -/* i2c Touch */ -&i2c0 { - status = "okay"; - pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>; - pinctrl-names = "default"; -}; - -/* i2c CM */ -&i2c2 { - status = "okay"; - pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>; - pinctrl-names = "default"; -}; - -/* i2c Audio */ -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - non-removable; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; - -&usb2_phy1 { - phy-supply = <&vcc_5v>; -}; diff --git a/arch/arm/dts/meson-g12a.dtsi b/arch/arm/dts/meson-g12a.dtsi deleted file mode 100644 index 7677764eeee..00000000000 --- a/arch/arm/dts/meson-g12a.dtsi +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Amlogic, Inc. All rights reserved. - */ - -#include "meson-g12.dtsi" - -/ { - compatible = "amlogic,g12a"; - - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - }; - }; - - cpu_opp_table: opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <731000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <731000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <731000>; - }; - - opp-1398000000 { - opp-hz = /bits/ 64 <1398000000>; - opp-microvolt = <761000>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <791000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <831000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <861000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <981000>; - }; - }; -}; - -&cpu_thermal { - cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&pmu { - compatible = "amlogic,g12a-ddr-pmu"; -}; diff --git a/arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts b/arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts deleted file mode 100644 index 31365316b2e..00000000000 --- a/arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> - */ - -/dts-v1/; - -#include "meson-g12b-a311d.dtsi" -#include "meson-g12b-bananapi.dtsi" - -/ { - compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b"; - model = "BananaPi M2S"; - - aliases { - i2c0 = &i2c1; - i2c1 = &i2c3; - }; -}; - -/* Camera (CSI) bus */ -&i2c1 { - status = "okay"; - pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; - pinctrl-names = "default"; -}; - -/* Display (DSI) bus */ -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; -}; diff --git a/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts b/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts deleted file mode 100644 index 124a8090108..00000000000 --- a/arch/arm/dts/meson-g12b-a311d-khadas-vim3.dts +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> - */ - -/dts-v1/; - -#include "meson-g12b-a311d.dtsi" -#include "meson-khadas-vim3.dtsi" -#include "meson-g12b-khadas-vim3.dtsi" - -/ { - compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b"; -}; - -/* - * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential - * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between - * an USB3.0 Type A connector and a M.2 Key M slot. - * The PHY driving these differential lines is shared between - * the USB3.0 controller and the PCIe Controller, thus only - * a single controller can use it. - * If the MCU is configured to mux the PCIe/USB3.0 differential lines - * to the M.2 Key M slot, uncomment the following block to disable - * USB3.0 from the USB Complex and enable the PCIe controller. - * The End User is not expected to uncomment the following except for - * testing purposes, but instead rely on the firmware/bootloader to - * update these nodes accordingly if PCIe mode is selected by the MCU. - */ -/* -&pcie { - status = "okay"; -}; - -&usb { - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; -}; - */ diff --git a/arch/arm/dts/meson-g12b-a311d.dtsi b/arch/arm/dts/meson-g12b-a311d.dtsi deleted file mode 100644 index d61f43052a3..00000000000 --- a/arch/arm/dts/meson-g12b-a311d.dtsi +++ /dev/null @@ -1,149 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#include "meson-g12b.dtsi" - -/ { - cpu_opp_table_0: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <761000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <781000>; - }; - - opp-1398000000 { - opp-hz = /bits/ 64 <1398000000>; - opp-microvolt = <811000>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <861000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <901000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <951000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1001000>; - }; - }; - - cpub_opp_table_1: opp-table-1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <731000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <751000>; - }; - - opp-1398000000 { - opp-hz = /bits/ 64 <1398000000>; - opp-microvolt = <771000>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <771000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <781000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <791000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <831000>; - }; - - opp-1908000000 { - opp-hz = /bits/ 64 <1908000000>; - opp-microvolt = <861000>; - }; - - opp-2016000000 { - opp-hz = /bits/ 64 <2016000000>; - opp-microvolt = <911000>; - }; - - opp-2108000000 { - opp-hz = /bits/ 64 <2108000000>; - opp-microvolt = <951000>; - }; - - opp-2208000000 { - opp-hz = /bits/ 64 <2208000000>; - opp-microvolt = <1011000>; - }; - }; -}; diff --git a/arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts deleted file mode 100644 index 1b0c3881c6a..00000000000 --- a/arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts +++ /dev/null @@ -1,165 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org> - */ - -/dts-v1/; - -#include "meson-g12b-bananapi-cm4.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b"; - model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module"; - - aliases { - ethernet0 = ðmac; - i2c0 = &i2c1; - i2c1 = &i2c3; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "Function"; - linux,code = <KEY_FN>; - press-threshold-microvolt = <10000>; - }; - }; - - hdmi_connector: hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-green { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "BPI-CM4IO"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&cecb_AO { - status = "okay"; -}; - -ðmac { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -/* CSI port */ -&i2c1 { - status = "okay"; -}; - -/* DSI port for touchscreen */ -&i2c3 { - status = "okay"; -}; - -/* miniPCIe port with USB + SIM slot */ -&pcie { - status = "okay"; -}; - -&sd_emmc_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -/* Peripheral Only USB-C port */ -&usb { - dr_mode = "peripheral"; - - status = "okay"; -}; diff --git a/arch/arm/dts/meson-g12b-bananapi-cm4.dtsi b/arch/arm/dts/meson-g12b-bananapi-cm4.dtsi deleted file mode 100644 index 97e522921b0..00000000000 --- a/arch/arm/dts/meson-g12b-bananapi-cm4.dtsi +++ /dev/null @@ -1,388 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org> - */ - -#include "meson-g12b-a311d.dtsi" -#include <dt-bindings/gpio/meson-g12a-gpio.h> - -/ { - aliases { - serial0 = &uart_AO; - rtc1 = &vrtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - emmc_1v8: regulator-emmc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - dc_in: regulator-dc-in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddio_c: regulator-vddio-c { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_C"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - - gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>; - gpios-states = <1>; - - states = <1800000 0>, - <3300000 1>; - }; - - vddao_1v8: regulator-vddao-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwm-supply = <&dc_in>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * SY8120B1ABC DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwm-supply = <&dc_in>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -/* Ethernet to be enabled in baseboard DT */ -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - phy-mode = "rgmii-txid"; - phy-handle = <&external_phy>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -/* HDMI to be enabled in baseboard DT */ -&hdmi_tx { - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&dc_in>; -}; - -/* "Camera" I2C bus */ -&i2c1 { - pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; - pinctrl-names = "default"; -}; - -/* Main I2C bus */ -&i2c2 { - pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; - pinctrl-names = "default"; -}; - -/* "ID" I2C bus */ -&i2c3 { - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; -}; - -&pcie { - reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - - status = "okay"; -}; - -&pwm_ef { - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - - status = "okay"; -}; - -&saradc { - vref-supply = <&vddao_1v8>; - - status = "okay"; -}; - -/* on-module SDIO WiFi */ -&sd_emmc_a { - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - sd-uhs-sdr104; - max-frequency = <50000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; - - status = "okay"; - - rtl8822cs: wifi@1 { - reg = <1>; - }; -}; - -/* SD card to be enabled in baseboard DT */ -&sd_emmc_b { - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_c>; -}; - -/* on-module eMMC */ -&sd_emmc_c { - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_1v8>; - - status = "okay"; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -/* on-module UART BT */ -&uart_A { - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - status = "okay"; - - bluetooth { - compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; - device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart_AO { - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb { - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; -}; diff --git a/arch/arm/dts/meson-g12b-bananapi.dtsi b/arch/arm/dts/meson-g12b-bananapi.dtsi deleted file mode 100644 index 83709787eb9..00000000000 --- a/arch/arm/dts/meson-g12b-bananapi.dtsi +++ /dev/null @@ -1,521 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> - */ - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - rtc1 = &vrtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */ - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "RST"; - linux,code = <KEY_POWER>; - press-threshold-microvolt = <10000>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - fan0: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - cooling-min-state = <0>; - cooling-max-state = <3>; - cooling-levels = <0 120 170 220>; - pwms = <&pwm_cd 1 40000 0>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - - led-1 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - dc_in: regulator-dc-in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc-5v { - compatible = "regulator-fixed"; - regulator-name = "VCC_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_3v3: regulator-vcc-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vsys_3v3>; - regulator-always-on; - }; - - vcc_1v8: regulator-vcc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vddao_1v8: regulator-vddao-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vsys_3v3>; - regulator-always-on; - }; - - vddcpu_a: regulator-vddcpu-a { - compatible = "pwm-regulator"; - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - pwm-supply = <&dc_in>; - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - compatible = "pwm-regulator"; - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - pwm-supply = <&vsys_3v3>; - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - regulator-boot-on; - regulator-always-on; - }; - - vsys_3v3: regulator-vsys-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VSYS_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - usb_pwr: regulator-usb-pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "BPI-M2S"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -/* Main i2c bus */ -&i2c2 { - status = "okay"; - pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; - pinctrl-names = "default"; -}; - -&pcie { - status = "okay"; - reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; -}; - -&pwm_ab { - status = "okay"; - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; -}; - -&pwm_cd { - status = "okay"; - pinctrl-0 = <&pwm_d_x6_pins>; - pinctrl-names = "default"; - pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - /* enable if WiFi/BT board connected */ - status = "disabled"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - sd-uhs-sdr104; - max-frequency = <50000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vsys_3v3>; - vqmmc-supply = <&vddao_1v8>; - - rtl8822cs: wifi@1 { - reg = <1>; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vsys_3v3>; - vqmmc-supply = <&vsys_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - /* enable if WiFi/BT board connected */ - status = "disabled"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; - device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb2_phy0 { - phy-supply = <&dc_in>; -}; - -&usb2_phy1 { - phy-supply = <&usb_pwr>; -}; - -&usb3_pcie_phy { - phy-supply = <&usb_pwr>; -}; - -&usb { - status = "okay"; - dr_mode = "peripheral"; - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; -}; diff --git a/arch/arm/dts/meson-g12b-gsking-x.dts b/arch/arm/dts/meson-g12b-gsking-x.dts deleted file mode 100644 index 6c7bfacbad7..00000000000 --- a/arch/arm/dts/meson-g12b-gsking-x.dts +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> - */ - -/dts-v1/; - -#include "meson-g12b-w400.dtsi" -#include <dt-bindings/leds/common.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "azw,gsking-x", "amlogic,s922x", "amlogic,g12b"; - model = "Beelink GS-King X"; - - aliases { - rtc0 = &rtc; - rtc1 = &vrtc; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = <KEY_POWER>; - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "GSKING-X"; - audio-aux-devs = <&tdmout_a>; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 1", - "TDMOUT_A IN 1", "FRDDR_B OUT 1", - "TDMOUT_A IN 2", "FRDDR_C OUT 1", - "TDM_A Playback", "TDMOUT_A OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - }; - - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - wakeup-source; - }; -}; - -&tdmif_a { - status = "okay"; -}; - -&tdmout_a { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-g12b-gtking-pro.dts b/arch/arm/dts/meson-g12b-gtking-pro.dts deleted file mode 100644 index 707daf92787..00000000000 --- a/arch/arm/dts/meson-g12b-gtking-pro.dts +++ /dev/null @@ -1,142 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> - */ - -/dts-v1/; - -#include "meson-g12b-w400.dtsi" -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b"; - model = "Beelink GT-King Pro"; - - aliases { - rtc0 = &rtc; - rtc1 = &vrtc; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = <KEY_POWER>; - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-white { - label = "power:white"; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "GTKING-PRO"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - wakeup-source; - }; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-g12b-gtking.dts b/arch/arm/dts/meson-g12b-gtking.dts deleted file mode 100644 index 5d96c144905..00000000000 --- a/arch/arm/dts/meson-g12b-gtking.dts +++ /dev/null @@ -1,163 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> - */ - -/dts-v1/; - -#include "meson-g12b-w400.dtsi" -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b"; - model = "Beelink GT-King"; - - aliases { - rtc0 = &rtc; - rtc1 = &vrtc; - }; - - spdif_dit: audio-codec-1 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - status = "okay"; - sound-name-prefix = "DIT"; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "GTKING"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "SPDIFOUT IN 1", "FRDDR_B OUT 3", - "SPDIFOUT IN 2", "FRDDR_C OUT 3"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* spdif hdmi or toslink interface */ - dai-link-4 { - sound-dai = <&spdifout>; - - codec-0 { - sound-dai = <&spdif_dit>; - }; - - codec-1 { - sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; - }; - }; - - /* spdif hdmi interface */ - dai-link-5 { - sound-dai = <&spdifout_b>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-6 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - wakeup-source; - }; -}; - -&spdifout { - pinctrl-0 = <&spdif_out_h_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&spdifout_b { - status = "okay"; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-g12b-khadas-vim3.dtsi b/arch/arm/dts/meson-g12b-khadas-vim3.dtsi deleted file mode 100644 index f42cf4b8af2..00000000000 --- a/arch/arm/dts/meson-g12b-khadas-vim3.dtsi +++ /dev/null @@ -1,107 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> - */ - -/ { - model = "Khadas VIM3"; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - vin-supply = <&dc_in>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * Silergy SY8030DEC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - vin-supply = <&vsys_3v3>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - diff --git a/arch/arm/dts/meson-g12b-odroid-go-ultra.dts b/arch/arm/dts/meson-g12b-odroid-go-ultra.dts deleted file mode 100644 index 1e40709610c..00000000000 --- a/arch/arm/dts/meson-g12b-odroid-go-ultra.dts +++ /dev/null @@ -1,722 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Neil Armstrong <neil.armstrong@linaro.org> - */ - -/dts-v1/; - -#include "meson-g12b-s922x.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-toacodec.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b"; - model = "Hardkernel ODROID-GO-Ultra"; - - aliases { - serial0 = &uart_AO; - rtc0 = &vrtc; - }; - - adc-joystick-left { - compatible = "adc-joystick"; - io-channels = <&saradc 2>, <&saradc 3>; - poll-interval = <10>; - #address-cells = <1>; - #size-cells = <0>; - - axis@0 { - reg = <0>; - linux,code = <ABS_Y>; - abs-range = <3150 950>; - abs-fuzz = <32>; - abs-flat = <64>; - }; - axis@1 { - reg = <1>; - linux,code = <ABS_X>; - abs-range = <700 2900>; - abs-fuzz = <32>; - abs-flat = <64>; - }; - }; - - adc-joystick-right { - compatible = "adc-joystick"; - io-channels = <&saradc 0>, <&saradc 1>; - poll-interval = <10>; - #address-cells = <1>; - #size-cells = <0>; - - axis@0 { - reg = <0>; - linux,code = <ABS_RY>; - abs-range = <3150 950>; - abs-fuzz = <32>; - abs-flat = <64>; - }; - axis@1 { - reg = <1>; - linux,code = <ABS_RX>; - abs-range = <800 3000>; - abs-fuzz = <32>; - abs-flat = <64>; - }; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - codec_clk: codec-clk { - compatible = "fixed-clock"; - clock-frequency = <12288000>; - clock-output-names = "codec_clk"; - #clock-cells = <0>; - }; - - gpio-keys { - compatible = "gpio-keys-polled"; - poll-interval = <10>; - pinctrl-0 = <&keypad_gpio_pins>; - pinctrl-names = "default"; - - volume-up-button { - label = "VOLUME-UP"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&gpio GPIOX_8 GPIO_ACTIVE_LOW>; - }; - volume-down-button { - label = "VOLUME-DOWN"; - linux,code = <KEY_VOLUMEDOWN>; - gpios = <&gpio GPIOX_9 GPIO_ACTIVE_LOW>; - }; - dpad-up-button { - label = "DPAD-UP"; - linux,code = <BTN_DPAD_UP>; - gpios = <&gpio GPIOX_0 GPIO_ACTIVE_LOW>; - }; - dpad-down-button { - label = "DPAD-DOWN"; - linux,code = <BTN_DPAD_DOWN>; - gpios = <&gpio GPIOX_1 GPIO_ACTIVE_LOW>; - }; - dpad-left-button { - label = "DPAD-LEFT"; - linux,code = <BTN_DPAD_LEFT>; - gpios = <&gpio GPIOX_2 GPIO_ACTIVE_LOW>; - }; - dpad-right-button { - label = "DPAD-RIGHT"; - linux,code = <BTN_DPAD_RIGHT>; - gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>; - }; - a-button { - label = "A"; - linux,code = <BTN_EAST>; - gpios = <&gpio GPIOX_4 GPIO_ACTIVE_LOW>; - }; - b-button { - label = "B"; - linux,code = <BTN_SOUTH>; - gpios = <&gpio GPIOX_5 GPIO_ACTIVE_LOW>; - }; - y-button { - label = "Y"; - linux,code = <BTN_WEST>; - gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - }; - x-button { - label = "X"; - linux,code = <BTN_NORTH>; - gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; - }; - f1-button { - label = "F1"; - linux,code = <BTN_TRIGGER_HAPPY1>; - gpios = <&gpio GPIOX_17 GPIO_ACTIVE_LOW>; - }; - f2-button { - label = "F2"; - linux,code = <BTN_TRIGGER_HAPPY2>; - gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; - }; - f3-button { - label = "F3"; - linux,code = <BTN_TRIGGER_HAPPY3>; - gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>; - }; - f4-button { - label = "F4"; - linux,code = <BTN_TRIGGER_HAPPY4>; - gpios = <&gpio GPIOX_12 GPIO_ACTIVE_LOW>; - }; - f5-button { - label = "F5"; - linux,code = <BTN_TRIGGER_HAPPY5>; - gpios = <&gpio GPIOX_13 GPIO_ACTIVE_LOW>; - }; - f6-button { - label = "F6"; - linux,code = <BTN_TRIGGER_HAPPY6>; - gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>; - }; - top-left-button { - label = "TOP Left"; - linux,code = <BTN_TL>; - gpios = <&gpio GPIOX_14 GPIO_ACTIVE_LOW>; - }; - top-left2-button { - label = "TOP Left 2"; - linux,code = <BTN_TL2>; - gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>; - }; - top-right-button { - label = "TOP Right"; - linux,code = <BTN_TR>; - gpios = <&gpio GPIOX_15 GPIO_ACTIVE_LOW>; - }; - top-right2-button { - label = "TOP Right 2"; - linux,code = <BTN_TR2>; - gpios = <&gpio GPIOX_18 GPIO_ACTIVE_LOW>; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = <LED_COLOR_ID_BLUE>; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - vdd_sys: regulator-vdd-sys { - compatible = "regulator-fixed"; - regulator-name = "VDD_SYS"; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - regulator-always-on; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "Odroid GO Ultra"; - audio-widgets = "Microphone", "Mic Jack", - "Headphone", "Headphones", - "Speaker", "Internal Speakers"; - audio-aux-devs = <&tdmout_b>, <&tdmin_b>, <&speaker_amp>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TDMIN_B IN 1", "TDM_B Capture", - "TDMIN_B IN 4", "TDM_B Loopback", - "TODDR_A IN 1", "TDMIN_B OUT", - "MICL", "Mic Jack", - "Headphones", "HPOL", - "Headphones", "HPOR", - "Speaker Amplifier INL", "HPOL", - "Speaker Amplifier INR", "HPOR", - "Internal Speakers", "Speaker Amplifier OUTL", - "Internal Speakers", "Speaker Amplifier OUTR"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&toddr_a>; - }; - - dai-link-2 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&rk817>; - }; - }; - }; - - speaker_amp: speaker-amplifier { - compatible = "simple-audio-amplifier"; - sound-name-prefix = "Speaker Amplifier"; - VCC-supply = <&hp_5v>; - }; -}; - -&arb { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -/* RK817 only supports 12.5mV steps, round up the values */ -&cpu_opp_table_0 { - opp-1000000000 { - opp-microvolt = <737500>; - }; - opp-1200000000 { - opp-microvolt = <737500>; - }; - opp-1398000000 { - opp-microvolt = <762500>; - }; - opp-1512000000 { - opp-microvolt = <800000>; - }; - opp-1608000000 { - opp-microvolt = <837500>; - }; - opp-1704000000 { - opp-microvolt = <862500>; - }; - opp-1896000000 { - opp-microvolt = <987500>; - }; - opp-1992000000 { - opp-microvolt = <1012500>; - }; -}; - -/* RK818 only supports 12.5mV steps, round up the values */ -&cpub_opp_table_1 { - opp-1000000000 { - opp-microvolt = <775000>; - }; - opp-1200000000 { - opp-microvolt = <775000>; - }; - opp-1398000000 { - opp-microvolt = <800000>; - }; - opp-1512000000 { - opp-microvolt = <825000>; - }; - opp-1608000000 { - opp-microvolt = <862500>; - }; - opp-1704000000 { - opp-microvolt = <900000>; - }; - opp-1800000000 { - opp-microvolt = <987500>; - }; - opp-1908000000 { - opp-microvolt = <1025000>; - }; -}; - -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; - pinctrl-names = "default"; - - rk818: pmic@1c { - compatible = "rockchip,rk818"; - reg = <0x1c>; - interrupt-parent = <&gpio_intc>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */ - - vcc1-supply = <&vdd_sys>; - vcc2-supply = <&vdd_sys>; - vcc3-supply = <&vdd_sys>; - vcc4-supply = <&vdd_sys>; - vcc6-supply = <&vdd_sys>; - vcc7-supply = <&vcc_2v3>; - vcc8-supply = <&vcc_2v3>; - vcc9-supply = <&vddao_3v3>; - boost-supply = <&vdd_sys>; - switch-supply = <&vdd_sys>; - - regulators { - vddcpu_a: DCDC_REG1 { - regulator-name = "vddcpu_a"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <775000>; - regulator-max-microvolt = <1025000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <775000>; - }; - }; - - vdd_ee: DCDC_REG2 { - regulator-name = "vdd_ee"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <875000>; - regulator-max-microvolt = <1250000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <875000>; - }; - }; - - vddq_1v1: DCDC_REG3 { - regulator-name = "vddq_1v1"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vddao_3v3: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vddao_3v3"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - hp_5v: DCDC_BOOST { - regulator-always-on; - regulator-boot-on; - regulator-name = "hp_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vddio_ao1v8: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vddio_ao1v8"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vddq_1v8: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vddq_1v8"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vddio_c: LDO_REG9 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vddio_c"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: SWITCH_REG { - regulator-name = "vcc_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - OTG_SWITCH { - regulator-name = "otg_switch"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio_intc>; - - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */ - - vcc1-supply = <&vdd_sys>; - vcc2-supply = <&vdd_sys>; - vcc3-supply = <&vdd_sys>; - vcc4-supply = <&vdd_sys>; - vcc5-supply = <&vdd_sys>; - vcc6-supply = <&vdd_sys>; - vcc7-supply = <&vdd_sys>; - vcc8-supply = <&vdd_sys>; - vcc9-supply = <&rk817_boost>; - - #sound-dai-cells = <0>; - clocks = <&codec_clk>; - clock-names = "mclk"; - - #clock-cells = <1>; - - regulators { - vddcpu_b: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <737500>; - regulator-max-microvolt = <1012500>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vddcpu_b"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_2v3: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2300000>; - regulator-max-microvolt = <2400000>; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_2v3"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vdd_codec"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_lcd: LDO_REG8 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_lcd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk817_boost: BOOST { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5400000>; - regulator-name = "rk817_boost"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - usb_host: OTG_SWITCH { - regulator-name = "usb_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&clkc_audio { - status = "okay"; -}; - -ð_phy { - status = "disabled"; -}; - -&frddr_a { - status = "okay"; -}; - -&periphs_pinctrl { - keypad_gpio_pins: keypad-gpio { - mux { - groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", - "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7", - "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11", - "GPIOX_12", "GPIOX_13", "GPIOX_14", "GPIOX_15", - "GPIOX_16", "GPIOX_17", "GPIOX_18", "GPIOX_19"; - function = "gpio_periphs"; - bias-pull-up; - output-disable; - }; - }; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao1v8>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vddio_c>; - -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vddio_ao1v8>; -}; - - -&tdmif_b { - pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>; - pinctrl-names = "default"; - status = "okay"; - - assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>, - <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>; - assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - assigned-clock-rates = <0>, <0>; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "peripheral"; -}; - -&usb2_phy0 { - status = "okay"; -}; - -&usb2_phy1 { - status = "okay"; - phy-supply = <&usb_host>; -}; diff --git a/arch/arm/dts/meson-g12b-odroid-n2-plus.dts b/arch/arm/dts/meson-g12b-odroid-n2-plus.dts deleted file mode 100644 index ce1198ad34e..00000000000 --- a/arch/arm/dts/meson-g12b-odroid-n2-plus.dts +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; - -/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */ -#include "meson-g12b-a311d.dtsi" -#include "meson-g12b-odroid-n2.dtsi" - -/ { - compatible = "hardkernel,odroid-n2-plus", "amlogic,s922x", "amlogic,g12b"; - model = "Hardkernel ODROID-N2Plus"; -}; - -&vddcpu_a { - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwms = <&pwm_ab 0 1500 0>; -}; - -&vddcpu_b { - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwms = <&pwm_AO_cd 1 1500 0>; -}; - diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dts b/arch/arm/dts/meson-g12b-odroid-n2.dts deleted file mode 100644 index a198a91259e..00000000000 --- a/arch/arm/dts/meson-g12b-odroid-n2.dts +++ /dev/null @@ -1,15 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; - -#include "meson-g12b-s922x.dtsi" -#include "meson-g12b-odroid-n2.dtsi" - -/ { - compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b"; - model = "Hardkernel ODROID-N2"; -}; diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dtsi b/arch/arm/dts/meson-g12b-odroid-n2.dtsi deleted file mode 100644 index 24d0442dffb..00000000000 --- a/arch/arm/dts/meson-g12b-odroid-n2.dtsi +++ /dev/null @@ -1,303 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#include "meson-g12b-odroid.dtsi" - -/ { - aliases { - rtc0 = &rtc; - }; - - dio2133: audio-amplifier-0 { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - VCC-supply = <&vcc_5v>; - sound-name-prefix = "U19"; - status = "okay"; - }; - - hub_5v: regulator-hub_5v { - compatible = "regulator-fixed"; - regulator-name = "HUB_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the Hub CHIPENABLE, LOW sets low power state */ - gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "ODROID-N2"; - audio-widgets = "Line", "Lineout"; - audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, - <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, - <&dio2133>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TDMOUT_C IN 0", "FRDDR_A OUT 2", - "TDMOUT_C IN 1", "FRDDR_B OUT 2", - "TDMOUT_C IN 2", "FRDDR_C OUT 2", - "TDM_C Playback", "TDMOUT_C OUT", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 4", "TDM_B Loopback", - "TDMIN_C IN 4", "TDM_B Loopback", - "TDMIN_LB IN 1", "TDM_B Loopback", - "TDMIN_A IN 5", "TDM_C Loopback", - "TDMIN_B IN 5", "TDM_C Loopback", - "TDMIN_C IN 5", "TDM_C Loopback", - "TDMIN_LB IN 2", "TDM_C Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT", - "TODDR_A IN 2", "TDMIN_C OUT", - "TODDR_B IN 2", "TDMIN_C OUT", - "TODDR_C IN 2", "TDMIN_C OUT", - "TODDR_A IN 6", "TDMIN_LB OUT", - "TODDR_B IN 6", "TDMIN_LB OUT", - "TODDR_C IN 6", "TDMIN_LB OUT", - "U19 INL", "ACODEC LOLP", - "U19 INR", "ACODEC LORP", - "Lineout", "U19 OUTL", - "Lineout", "U19 OUTR"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-6 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - - codec-1 { - sound-dai = <&toacodec TOACODEC_IN_B>; - }; - }; - - /* i2s jack output interface */ - dai-link-7 { - sound-dai = <&tdmif_c>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; - }; - - codec-1 { - sound-dai = <&toacodec TOACODEC_IN_C>; - }; - }; - - /* hdmi glue */ - dai-link-8 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - - /* acodec glue */ - dai-link-9 { - sound-dai = <&toacodec TOACODEC_OUT>; - - codec { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddao_1v8>; - status = "okay"; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&gpio { - gpio-line-names = - /* GPIOZ */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOH */ - "", "", "", "", "", "", "", "", - "", - /* BOOT */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOC */ - "", "", "", "", "", "", "", "", - /* GPIOA */ - "PIN_44", /* GPIOA_0 */ - "PIN_46", /* GPIOA_1 */ - "PIN_45", /* GPIOA_2 */ - "PIN_47", /* GPIOA_3 */ - "PIN_26", /* GPIOA_4 */ - "", "", "", "", "", "", - "PIN_42", /* GPIOA_11 */ - "PIN_32", /* GPIOA_12 */ - "PIN_7", /* GPIOA_13 */ - "PIN_27", /* GPIOA_14 */ - "PIN_28", /* GPIOA_15 */ - /* GPIOX */ - "PIN_16", /* GPIOX_0 */ - "PIN_18", /* GPIOX_1 */ - "PIN_22", /* GPIOX_2 */ - "PIN_11", /* GPIOX_3 */ - "PIN_13", /* GPIOX_4 */ - "PIN_33", /* GPIOX_5 */ - "PIN_35", /* GPIOX_6 */ - "PIN_15", /* GPIOX_7 */ - "PIN_19", /* GPIOX_8 */ - "PIN_21", /* GPIOX_9 */ - "PIN_24", /* GPIOX_10 */ - "PIN_23", /* GPIOX_11 */ - "PIN_8", /* GPIOX_12 */ - "PIN_10", /* GPIOX_13 */ - "PIN_29", /* GPIOX_14 */ - "PIN_31", /* GPIOX_15 */ - "PIN_12", /* GPIOX_16 */ - "PIN_3", /* GPIOX_17 */ - "PIN_5", /* GPIOX_18 */ - "PIN_36"; /* GPIOX_19 */ - /* - * WARNING: The USB Hub on the Odroid-N2 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - hog-0 { - gpio-hog; - gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - wakeup-source; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - linux,rc-map-name = "rc-odroid"; -}; - -/* - * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins - * and eMMC Data 4 to 7 pins. - * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, - * and change bus-width to 4 then spifc can be enabled. - * The SW1 slide should also be set to the correct position. - */ -&spifc { - status = "disabled"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - mx25u64: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mxicy,mx25u6435f", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - }; -}; - -&toacodec { - status = "okay"; -}; - -&usb { - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy1 { - /* Enable the hub which is connected to this port */ - phy-supply = <&hub_5v>; -}; diff --git a/arch/arm/dts/meson-g12b-odroid-n2l.dts b/arch/arm/dts/meson-g12b-odroid-n2l.dts deleted file mode 100644 index 70919f40d59..00000000000 --- a/arch/arm/dts/meson-g12b-odroid-n2l.dts +++ /dev/null @@ -1,125 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Dongjin Kim <tobetter@gmail.com> - */ - -/dts-v1/; - -/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */ -#include "meson-g12b-a311d.dtsi" -#include "meson-g12b-odroid.dtsi" - -/ { - compatible = "hardkernel,odroid-n2l", "amlogic,s922x", "amlogic,g12b"; - model = "Hardkernel ODROID-N2L"; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "ODROID-N2L"; - audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>, - <&tdmin_c>, <&tdmin_lb>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 4", "TDM_B Loopback", - "TDMIN_C IN 4", "TDM_B Loopback", - "TDMIN_LB IN 1", "TDM_B Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT", - "TODDR_A IN 2", "TDMIN_C OUT", - "TODDR_B IN 2", "TDMIN_C OUT", - "TODDR_C IN 2", "TDMIN_C OUT", - "TODDR_A IN 6", "TDMIN_LB OUT", - "TODDR_B IN 6", "TDMIN_LB OUT", - "TODDR_C IN 6", "TDMIN_LB OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-6 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-7 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -ð_phy { - status = "disabled"; -}; - -&vddcpu_a { - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwms = <&pwm_ab 0 1500 0>; -}; - -&vddcpu_b { - regulator-min-microvolt = <680000>; - regulator-max-microvolt = <1040000>; - - pwms = <&pwm_AO_cd 1 1500 0>; -}; - -&usb2_phy0 { - phy-supply = <&usb_pwr_en>; -}; - -&usb2_phy1 { - phy-supply = <&usb_pwr_en>; -}; diff --git a/arch/arm/dts/meson-g12b-odroid.dtsi b/arch/arm/dts/meson-g12b-odroid.dtsi deleted file mode 100644 index 9e12a34b284..00000000000 --- a/arch/arm/dts/meson-g12b-odroid.dtsi +++ /dev/null @@ -1,445 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-toacodec.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - rtc1 = &vrtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - fan: gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>; - /* Using Dummy Speed */ - gpio-fan,speed-map = <0 0>, <1 1>; - #cooling-cells = <2>; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - label = "n2:blue"; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - tf_io: gpio-regulator-tf_io { - compatible = "regulator-gpio"; - - regulator-name = "TF_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the microUSB port power enable */ - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&main_12v>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&main_12v>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * Silergy SY8120B1ABC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu_thermal { - trips { - cpu_active: cpu-active { - temperature = <60000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - }; - - cooling-maps { - map { - trip = <&cpu_active>; - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&ddr_thermal { - trips { - ddr_active: ddr-active { - temperature = <60000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - }; - - cooling-maps { - map { - trip = <&ddr_active>; - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&tf_io>; - -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmif_c { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmin_c { - status = "okay"; -}; - -&tdmin_lb { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tdmout_c { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; -}; - -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; diff --git a/arch/arm/dts/meson-g12b-radxa-zero2.dts b/arch/arm/dts/meson-g12b-radxa-zero2.dts deleted file mode 100644 index 890f5bfebb0..00000000000 --- a/arch/arm/dts/meson-g12b-radxa-zero2.dts +++ /dev/null @@ -1,489 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> - * Copyright (c) 2022 Radxa Limited - * Author: Yuntian Zhang <yt@radxa.com> - */ - -/dts-v1/; - -#include "meson-g12b-a311d.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "radxa,zero2", "amlogic,a311d", "amlogic,g12b"; - model = "Radxa Zero2"; - - aliases { - serial0 = &uart_AO; - serial2 = &uart_A; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - power-button { - label = "power"; - linux,code = <KEY_POWER>; - gpios = <&gpio_ao GPIOAO_3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-green { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio GPIOA_12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - ao_5v: regulator-ao-5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcc_1v8: regulator-vcc-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddao_1v8: regulator-vddao-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&ao_5v>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * Silergy SY8120B1ABC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&ao_5v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "RADXA-ZERO2"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; - - wifi32k: clock-0 { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&gpio { - gpio-line-names = - /* GPIOZ */ - "PIN_27", "PIN_28", "PIN_7", "PIN_11", "PIN_13", "PIN_15", "PIN_18", "PIN_40", - "", "", "", "", "", "", "", "", - /* GPIOH */ - "", "", "", "", "PIN_19", "PIN_21", "PIN_24", "PIN_23", - "", - /* BOOT */ - "", "", "", "", "", "", "", "", - "", "", "", "", "EMMC_PWRSEQ", "", "", "", - /* GPIOC */ - "", "", "", "", "", "", "SD_CD", "PIN_36", - /* GPIOA */ - "PIN_32", "PIN_12", "PIN_35", "", "", "PIN_38", "", "", - "", "", "", "", "LED_GREEN", "PIN_31", "PIN_3", "PIN_5", - /* GPIOX */ - "", "", "", "", "", "", "SDIO_PWRSEQ", "", - "", "", "", "", "", "", "", "", - "", "BT_SHUTDOWN", "", ""; -}; - -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "PIN_8", "PIN_10", "", "BTN_POWER", "", "", "", "PIN_29", - "PIN_33", "PIN_37", "FAN", "", - /* GPIOE */ - "", "", ""; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&ao_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "disabled"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_ef { - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_ab { - pinctrl-0 = <&pwm_ao_a_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts b/arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts deleted file mode 100644 index 7f66f263a2c..00000000000 --- a/arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> - */ - -/dts-v1/; - -#include "meson-g12b-s922x.dtsi" -#include "meson-g12b-bananapi.dtsi" - -/ { - compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b"; - model = "BananaPi M2S"; -}; diff --git a/arch/arm/dts/meson-g12b-s922x.dtsi b/arch/arm/dts/meson-g12b-s922x.dtsi deleted file mode 100644 index 1e5d0ee5d54..00000000000 --- a/arch/arm/dts/meson-g12b-s922x.dtsi +++ /dev/null @@ -1,139 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#include "meson-g12b.dtsi" - -/ { - cpu_opp_table_0: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <731000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <731000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <731000>; - }; - - opp-1398000000 { - opp-hz = /bits/ 64 <1398000000>; - opp-microvolt = <761000>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <791000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <831000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <861000>; - }; - - opp-1896000000 { - opp-hz = /bits/ 64 <1896000000>; - opp-microvolt = <981000>; - }; - - opp-1992000000 { - opp-hz = /bits/ 64 <1992000000>; - opp-microvolt = <1001000>; - }; - }; - - cpub_opp_table_1: opp-table-1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <751000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <751000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <751000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <667000000>; - opp-microvolt = <751000>; - }; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <771000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <771000>; - }; - - opp-1398000000 { - opp-hz = /bits/ 64 <1398000000>; - opp-microvolt = <791000>; - }; - - opp-1512000000 { - opp-hz = /bits/ 64 <1512000000>; - opp-microvolt = <821000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <861000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <891000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <981000>; - }; - - opp-1908000000 { - opp-hz = /bits/ 64 <1908000000>; - opp-microvolt = <1022000>; - }; - }; -}; diff --git a/arch/arm/dts/meson-g12b-w400.dtsi b/arch/arm/dts/meson-g12b-w400.dtsi deleted file mode 100644 index feb08850474..00000000000 --- a/arch/arm/dts/meson-g12b-w400.dtsi +++ /dev/null @@ -1,425 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> - */ - -/dts-v1/; - -#include "meson-g12b.dtsi" -#include "meson-g12b-s922x.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP1653 Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * MP1652 Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - usb1_pow: regulator-usb1-pow { - compatible = "regulator-fixed"; - regulator-name = "USB1_POW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* connected to SY6280A Power Switch */ - gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - usb_pwr_en: regulator-usb-pwr-en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to USB3 Type-A Port power enable */ - gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&pwm_ef { - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; - status = "okay"; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <100000000>; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - non-removable; - disable-wp; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <100000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy0 { - phy-supply = <&usb1_pow>; -}; - -&usb2_phy1 { - phy-supply = <&usb1_pow>; -}; diff --git a/arch/arm/dts/meson-g12b.dtsi b/arch/arm/dts/meson-g12b.dtsi deleted file mode 100644 index 75ff00fb2e4..00000000000 --- a/arch/arm/dts/meson-g12b.dtsi +++ /dev/null @@ -1,146 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#include "meson-g12.dtsi" - -/ { - compatible = "amlogic,g12b"; - - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - - core1 { - cpu = <&cpu1>; - }; - }; - - cluster1 { - core0 { - cpu = <&cpu100>; - }; - - core1 { - cpu = <&cpu101>; - }; - - core2 { - cpu = <&cpu102>; - }; - - core3 { - cpu = <&cpu103>; - }; - }; - }; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - capacity-dmips-mhz = <592>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - capacity-dmips-mhz = <592>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu100: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a73"; - reg = <0x0 0x100>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu101: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a73"; - reg = <0x0 0x101>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu102: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a73"; - reg = <0x0 0x102>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu103: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a73"; - reg = <0x0 0x103>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - }; - }; -}; - -&clkc { - compatible = "amlogic,g12b-clkc"; -}; - -&cpu_thermal { - cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&mali { - dma-coherent; -}; - -&pmu { - compatible = "amlogic,g12b-ddr-pmu"; -}; diff --git a/arch/arm/dts/meson-gx-libretech-pc.dtsi b/arch/arm/dts/meson-gx-libretech-pc.dtsi deleted file mode 100644 index 4e84ab87cc7..00000000000 --- a/arch/arm/dts/meson-gx-libretech-pc.dtsi +++ /dev/null @@ -1,447 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2019 BayLibre SAS. - * Author: Jerome Brunet <jbrunet@baylibre.com> - */ - -/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */ - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/sound/meson-aiu.h> - -/ { - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - button-update { - label = "update"; - linux,code = <KEY_VENDOR>; - press-threshold-microvolt = <1300000>; - }; - }; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - spi0 = &spifc; - }; - - dio2133: analog-amplifier { - compatible = "simple-audio-amplifier"; - sound-name-prefix = "AU2"; - VCC-supply = <&vcc5v>; - enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - status = "disabled"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = <KEY_POWER>; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - leds { - compatible = "gpio-leds"; - - led-green { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_DISK_ACTIVITY; - gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - }; - - led-blue { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - }; - - vcc_card: regulator-vcc_card { - compatible = "regulator-fixed"; - regulator-name = "VCC_CARD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddio_ao3v3>; - - gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc5v: regulator-vcc5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&ao_5v>; - - gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddio_ao3v3: regulator-vddio_ao3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddio_ao3v3>; - regulator-always-on; - }; - - vddio_card: regulator-vddio-card { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_CARD"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - - regulator-settling-time-up-us = <200>; - regulator-settling-time-down-us = <50000>; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "LIBRETECH-PC"; - audio-aux-devs = <&dio2133>; - audio-widgets = "Speaker", "7J4-14 LEFT", - "Speaker", "7J4-11 RIGHT"; - audio-routing = "AU2 INL", "ACODEC LOLN", - "AU2 INR", "ACODEC LORN", - "7J4-14 LEFT", "AU2 OUTL", - "7J4-11 RIGHT", "AU2 OUTR"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - - codec-1 { - sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - - dai-link-3 { - sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; - - codec-0 { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddio_ao18>; - status = "okay"; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; - status = "okay"; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_phy_irq_pins>; - pinctrl-names = "default"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&external_mdio { - external_phy: ethernet-phy@0 { - reg = <0>; - max-speed = <1000>; - reset-assert-us = <10000>; - reset-deassert-us = <30000>; - reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <25 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&pinctrl_periphs { - /* - * Make sure the reset pin of the usb HUB is driven high to take - * it out of reset. - */ - usb1_rst_pins: usb1_rst_irq { - mux { - groups = "GPIODV_3"; - function = "gpio_periphs"; - bias-disable; - output-high; - }; - }; - - /* Make sure the phy irq pin is properly configured as input */ - eth_phy_irq_pins: eth_phy_irq { - mux { - groups = "GPIOZ_15"; - function = "gpio_periphs"; - bias-disable; - output-disable; - }; - }; -}; - -&hdmi_tx { - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc5v>; - status = "okay"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c_C { - pinctrl-0 = <&i2c_c_dv18_pins>; - pinctrl-names = "default"; - status = "okay"; - - rtc: rtc@51 { - reg = <0x51>; - compatible = "nxp,pcf8563"; - #clock-cells = <0>; - clock-output-names = "rtc_clkout"; - }; -}; - -&pwm_AO_ab { - pinctrl-0 = <&pwm_ao_a_3_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_b_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_ef { - pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; - status = "okay"; -}; - -&saradc { - vref-supply = <&vddio_ao18>; - status = "okay"; -}; - -/* SD card */ -&sd_emmc_b { - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-ddr50; - max-frequency = <200000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vcc_card>; - vqmmc-supply = <&vddio_card>; - - status = "okay"; -}; - -/* eMMC */ -&sd_emmc_c { - pinctrl-0 = <&emmc_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddio_ao3v3>; - vqmmc-supply = <&vddio_boot>; - - status = "okay"; -}; - -&spifc { - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - status = "okay"; - - gd25lq128: flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <12000000>; - }; -}; - -&uart_AO { - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb1_rst_pins>; - pinctrl-names = "default"; - phy-supply = <&vcc5v>; -}; - -&usb2_phy1 { - phy-supply = <&vcc5v>; -}; diff --git a/arch/arm/dts/meson-gx-mali450.dtsi b/arch/arm/dts/meson-gx-mali450.dtsi deleted file mode 100644 index f9771b51c85..00000000000 --- a/arch/arm/dts/meson-gx-mali450.dtsi +++ /dev/null @@ -1,61 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 BayLibre SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -/ { - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-125000000 { - opp-hz = /bits/ 64 <125000000>; - opp-microvolt = <950000>; - }; - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <950000>; - }; - opp-285714285 { - opp-hz = /bits/ 64 <285714285>; - opp-microvolt = <950000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <950000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <950000>; - }; - opp-666666666 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <950000>; - }; - opp-744000000 { - opp-hz = /bits/ 64 <744000000>; - opp-microvolt = <950000>; - }; - }; -}; - -&apb { - mali: gpu@c0000 { - compatible = "arm,mali-450"; - reg = <0x0 0xc0000 0x0 0x40000>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gp", "gpmmu", "pp", "pmu", - "pp0", "ppmmu0", "pp1", "ppmmu1", - "pp2", "ppmmu2"; - operating-points-v2 = <&gpu_opp_table>; - }; -}; diff --git a/arch/arm/dts/meson-gx-p23x-q20x.dtsi b/arch/arm/dts/meson-gx-p23x-q20x.dtsi deleted file mode 100644 index dafc841f7c1..00000000000 --- a/arch/arm/dts/meson-gx-p23x-q20x.dtsi +++ /dev/null @@ -1,324 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione <carlo@endlessm.com> - */ - -/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either - * the pin-compatible S912 (GXM) or S905D (GXL) SoCs. - */ - -#include <dt-bindings/sound/meson-aiu.h> - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - dio2133: analog-amplifier { - compatible = "simple-audio-amplifier"; - sound-name-prefix = "AU2"; - VCC-supply = <&hdmi_5v>; - enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - }; - - spdif_dit: audio-codec-0 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - status = "okay"; - sound-name-prefix = "DIT"; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - hdmi_5v: regulator-hdmi-5v { - compatible = "regulator-fixed"; - - regulator-name = "HDMI_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "P230-Q200"; - audio-aux-devs = <&dio2133>; - audio-widgets = "Line", "Lineout"; - audio-routing = "AU2 INL", "ACODEC LOLP", - "AU2 INR", "ACODEC LORP", - "AU2 INL", "ACODEC LOLN", - "AU2 INR", "ACODEC LORN", - "Lineout", "AU2 OUTL", - "Lineout", "AU2 OUTR"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - - codec-1 { - sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; - }; - }; - - dai-link-3 { - sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; - - codec-0 { - sound-dai = <&spdif_dit>; - }; - }; - - dai-link-4 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - - dai-link-5 { - sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; - - codec-0 { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddio_ao18>; - status = "okay"; -}; - -&aiu { - status = "okay"; - pinctrl-0 = <&spdif_out_h_pins>; - pinctrl-names = "default"; - -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* Wireless SDIO Module */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* This UART is brought out to the DB9 connector */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "otg"; -}; diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi deleted file mode 100644 index 11f89bfecb5..00000000000 --- a/arch/arm/dts/meson-gx.dtsi +++ /dev/null @@ -1,675 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Andreas Färber - * - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione <carlo@endlessm.com> - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/power/meson-gxbb-power.h> -#include <dt-bindings/thermal/thermal.h> - -/ { - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - mmc0 = &sd_emmc_b; /* SD card */ - mmc1 = &sd_emmc_c; /* eMMC */ - mmc2 = &sd_emmc_a; /* SDIO */ - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* 16 MiB reserved for Hardware ROM Firmware */ - hwrom_reserved: hwrom@0 { - reg = <0x0 0x0 0x0 0x1000000>; - no-map; - }; - - /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@10000000 { - reg = <0x0 0x10000000 0x0 0x200000>; - no-map; - }; - - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved_alt: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - - /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ - secmon_reserved_bl32: secmon@5300000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x0 0x10000000>; - alignment = <0x0 0x400000>; - linux,cma-default; - }; - }; - - chosen { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - simplefb_cvbs: framebuffer-cvbs { - compatible = "amlogic,simple-framebuffer", - "simple-framebuffer"; - amlogic,pipeline = "vpu-cvbs"; - power-domains = <&pwrc PWRC_GXBB_VPU_ID>; - status = "disabled"; - }; - - simplefb_hdmi: framebuffer-hdmi { - compatible = "amlogic,simple-framebuffer", - "simple-framebuffer"; - amlogic,pipeline = "vpu-hdmi"; - power-domains = <&pwrc PWRC_GXBB_VPU_ID>; - status = "disabled"; - }; - }; - - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - #cooling-cells = <2>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - #cooling-cells = <2>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - #cooling-cells = <2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - }; - }; - - thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - - thermal-sensors = <&scpi_sensors 0>; - - trips { - cpu_passive: cpu-passive { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - cpu_hot: cpu-hot { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "hot"; - }; - - cpu_critical: cpu-critical { - temperature = <110000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cpu_cooling_maps: cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; - - firmware { - sm: secure-monitor { - compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm"; - }; - }; - - efuse: efuse { - compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse"; - #address-cells = <1>; - #size-cells = <1>; - read-only; - secure-monitor = <&sm>; - - sn: sn@14 { - reg = <0x14 0x10>; - }; - - eth_mac: eth-mac@34 { - reg = <0x34 0x10>; - }; - - bid: bid@46 { - reg = <0x46 0x30>; - }; - }; - - scpi { - compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; - mboxes = <&mailbox 1 &mailbox 2>; - shmem = <&cpu_scp_lpri &cpu_scp_hpri>; - - scpi_clocks: clocks { - compatible = "arm,scpi-clocks"; - - scpi_dvfs: clocks-0 { - compatible = "arm,scpi-dvfs-clocks"; - #clock-cells = <1>; - clock-indices = <0>; - clock-output-names = "vcpu"; - }; - }; - - scpi_sensors: sensors { - compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; - #thermal-sensor-cells = <1>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - cbus: bus@c1100000 { - compatible = "simple-bus"; - reg = <0x0 0xc1100000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; - - gpio_intc: interrupt-controller@9880 { - compatible = "amlogic,meson-gpio-intc"; - reg = <0x0 0x9880 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; - }; - - reset: reset-controller@4404 { - compatible = "amlogic,meson-gxbb-reset"; - reg = <0x0 0x04404 0x0 0x9c>; - #reset-cells = <1>; - }; - - aiu: audio-controller@5400 { - compatible = "amlogic,aiu"; - #sound-dai-cells = <2>; - sound-name-prefix = "AIU"; - reg = <0x0 0x5400 0x0 0x2ac>; - interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "i2s", "spdif"; - status = "disabled"; - }; - - uart_A: serial@84c0 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x84c0 0x0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - fifo-size = <128>; - }; - - uart_B: serial@84dc { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x84dc 0x0 0x18>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - i2c_A: i2c@8500 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x08500 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm_ab: pwm@8550 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x08550 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@8650 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x08650 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - saradc: adc@8680 { - compatible = "amlogic,meson-saradc"; - reg = <0x0 0x8680 0x0 0x34>; - #io-channel-cells = <1>; - interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - pwm_ef: pwm@86c0 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x086c0 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - uart_C: serial@8700 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x8700 0x0 0x18>; - interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - clock-measure@8758 { - compatible = "amlogic,meson-gx-clk-measure"; - reg = <0x0 0x8758 0x0 0x10>; - }; - - i2c_B: i2c@87c0 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x087c0 0x0 0x20>; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c_C: i2c@87e0 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x087e0 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spicc: spi@8d80 { - compatible = "amlogic,meson-gx-spicc"; - reg = <0x0 0x08d80 0x0 0x80>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spifc: spi@8c80 { - compatible = "amlogic,meson-gxbb-spifc"; - reg = <0x0 0x08c80 0x0 0x80>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - watchdog@98d0 { - compatible = "amlogic,meson-gxbb-wdt"; - reg = <0x0 0x098d0 0x0 0x10>; - clocks = <&xtal>; - }; - }; - - gic: interrupt-controller@c4301000 { - compatible = "arm,gic-400"; - reg = <0x0 0xc4301000 0 0x1000>, - <0x0 0xc4302000 0 0x2000>, - <0x0 0xc4304000 0 0x2000>, - <0x0 0xc4306000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - sram: sram@c8000000 { - compatible = "mmio-sram"; - reg = <0x0 0xc8000000 0x0 0x14000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0xc8000000 0x14000>; - - cpu_scp_lpri: scp-sram@0 { - compatible = "amlogic,meson-gxbb-scp-shmem"; - reg = <0x13000 0x400>; - }; - - cpu_scp_hpri: scp-sram@200 { - compatible = "amlogic,meson-gxbb-scp-shmem"; - reg = <0x13400 0x400>; - }; - }; - - aobus: bus@c8100000 { - compatible = "simple-bus"; - reg = <0x0 0xc8100000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; - - sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-gx-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - }; - - cec_AO: cec@100 { - compatible = "amlogic,meson-gx-ao-cec"; - reg = <0x0 0x00100 0x0 0x14>; - interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - sec_AO: ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; - }; - - uart_AO: serial@4c0 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; - reg = <0x0 0x004c0 0x0 0x18>; - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - uart_AO_B: serial@4e0 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; - reg = <0x0 0x004e0 0x0 0x18>; - interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - i2c_AO: i2c@500 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x500 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm_AO_ab: pwm@550 { - compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm"; - reg = <0x0 0x00550 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - ir: ir@580 { - compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir"; - reg = <0x0 0x00580 0x0 0x40>; - interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - }; - - vdec: video-codec@c8820000 { - compatible = "amlogic,gx-vdec"; - reg = <0x0 0xc8820000 0x0 0x10000>, - <0x0 0xc110a580 0x0 0xe4>; - reg-names = "dos", "esparser"; - - interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "vdec", "esparser"; - - amlogic,ao-sysctrl = <&sysctrl_AO>; - amlogic,canvas = <&canvas>; - }; - - periphs: bus@c8834000 { - compatible = "simple-bus"; - reg = <0x0 0xc8834000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; - - hwrng: rng@0 { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x0 0x0 0x4>; - }; - }; - - dmcbus: bus@c8838000 { - compatible = "simple-bus"; - reg = <0x0 0xc8838000 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>; - - canvas: video-lut@48 { - compatible = "amlogic,canvas"; - reg = <0x0 0x48 0x0 0x14>; - }; - }; - - hiubus: bus@c883c000 { - compatible = "simple-bus"; - reg = <0x0 0xc883c000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; - - sysctrl: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; - reg = <0 0 0 0x400>; - - pwrc: power-controller { - compatible = "amlogic,meson-gxbb-pwrc"; - #power-domain-cells = <1>; - amlogic,ao-sysctrl = <&sysctrl_AO>; - }; - }; - - mailbox: mailbox@404 { - compatible = "amlogic,meson-gxbb-mhu"; - reg = <0 0x404 0 0x4c>; - interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; - #mbox-cells = <1>; - }; - }; - - ethmac: ethernet@c9410000 { - compatible = "amlogic,meson-gxbb-dwmac", - "snps,dwmac-3.70a", - "snps,dwmac"; - reg = <0x0 0xc9410000 0x0 0x10000>, - <0x0 0xc8834540 0x0 0x4>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - rx-fifo-depth = <4096>; - tx-fifo-depth = <2048>; - power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; - status = "disabled"; - }; - - apb: apb@d0000000 { - compatible = "simple-bus"; - reg = <0x0 0xd0000000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; - - sd_emmc_a: mmc@70000 { - compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x70000 0x0 0x800>; - interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - sd_emmc_b: mmc@72000 { - compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x72000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - sd_emmc_c: mmc@74000 { - compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x74000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - }; - - vpu: vpu@d0100000 { - compatible = "amlogic,meson-gx-vpu"; - reg = <0x0 0xd0100000 0x0 0x100000>, - <0x0 0xc883c000 0x0 0x1000>; - reg-names = "vpu", "hhi"; - interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - amlogic,canvas = <&canvas>; - - /* CVBS VDAC output port */ - cvbs_vdac_port: port@0 { - reg = <0>; - }; - - /* HDMI-TX output port */ - hdmi_tx_port: port@1 { - reg = <1>; - - hdmi_tx_out: endpoint { - remote-endpoint = <&hdmi_tx_in>; - }; - }; - }; - - hdmi_tx: hdmi-tx@c883a000 { - compatible = "amlogic,meson-gx-dw-hdmi"; - reg = <0x0 0xc883a000 0x0 0x1c>; - interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <0>; - sound-name-prefix = "HDMITX"; - status = "disabled"; - - /* VPU VENC Input */ - hdmi_tx_venc_port: port@0 { - reg = <0>; - - hdmi_tx_in: endpoint { - remote-endpoint = <&hdmi_tx_out>; - }; - }; - - /* TMDS Output */ - hdmi_tx_tmds_port: port@1 { - reg = <1>; - }; - }; - }; -}; diff --git a/arch/arm/dts/meson-gxl-mali.dtsi b/arch/arm/dts/meson-gxl-mali.dtsi deleted file mode 100644 index 478e755cc87..00000000000 --- a/arch/arm/dts/meson-gxl-mali.dtsi +++ /dev/null @@ -1,17 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 BayLibre SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#include "meson-gx-mali450.dtsi" - -&mali { - compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; - - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; - clock-names = "bus", "core"; - - assigned-clocks = <&clkc CLKID_GP0_PLL>; - assigned-clock-rates = <744000000>; -}; diff --git a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts deleted file mode 100644 index 213a0705ebd..00000000000 --- a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts +++ /dev/null @@ -1,319 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Author: Jerome Brunet <jbrunet@baylibre.com> - */ - -/dts-v1/; - -#include <dt-bindings/input/input.h> -#include <dt-bindings/sound/meson-aiu.h> - -#include "meson-gxl-s805x.dtsi" - -/ { - compatible = "libretech,aml-s805x-ac", "amlogic,s805x", - "amlogic,meson-gxl"; - model = "Libre Computer AML-S805X-AC"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - spi0 = &spifc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cvbs-connector { - /* - * The pads are present but no connector is soldered on - * 2J2, so keep this off by default. - */ - status = "disabled"; - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - dc_5v: regulator-dc_5v { - compatible = "regulator-fixed"; - regulator-name = "DC_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x20000000>; - }; - - vcck: regulator-vcck { - compatible = "regulator-fixed"; - regulator-name = "VCCK"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_5v>; - - /* - * This is controlled by GPIOAO_9 we reserve this but - * claiming it as done below reset the board anyway - * Need to investigate this - * - * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - * enable-active-high; - */ - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_5v>; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "LIBRETECH-AC"; - audio-widgets = "Speaker", "9J5-3 LEFT", - "Speaker", "9J5-2 RIGHT"; - audio-routing = "9J5-3 LEFT", "ACODEC LOLN", - "9J5-2 RIGHT", "ACODEC LORN"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - - codec-1 { - sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - - dai-link-3 { - sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; - - codec-0 { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddio_ao18>; - status = "okay"; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - status = "okay"; -}; - -&internal_phy { - pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&gpio_ao { - gpio-line-names = "UART TX", - "UART RX", - "7J1 Header Pin31", - "", "", "", "", - "IR In", - "HDMI CEC", - "5V VCCK Regulator", - /* GPIO_TEST_N */ - ""; -}; - -&gpio { - gpio-line-names = /* Bank GPIOZ */ - "", "", "", "", "", "", "", - "", "", "", "", "", "", "", - "Eth Link LED", "Eth Activity LED", - /* Bank GPIOH */ - "HDMI HPD", "HDMI SDA", "HDMI SCL", - "", "7J1 Header Pin13", - "7J1 Header Pin15", - "7J1 Header Pin7", - "7J1 Header Pin12", - "7J1 Header Pin16", - "7J1 Header Pin18", - /* Bank BOOT */ - "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", - "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", - "eMMC Clk", "eMMC Reset", "eMMC CMD", - "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk", - "", "SPI NOR Chip Select", - /* Bank CARD */ - "", "", "", "", "", "", "", - /* Bank GPIODV */ - "", "", "", "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", "", "", "", - "7J1 Header Pin27", "7J1 Header Pin28", "", - "7J1 Header Pin29", - "VCCK Regulator", "VDDEE Regulator", - /* Bank GPIOX */ - "7J1 Header Pin22", "7J1 Header Pin26", - "7J1 Header Pin36", "7J1 Header Pin38", - "7J1 Header Pin40", "7J1 Header Pin37", - "7J1 Header Pin33", "7J1 Header Pin35", - "7J1 Header Pin19", "7J1 Header Pin21", - "7J1 Header Pin24", "7J1 Header Pin23", - "7J1 Header Pin8", "7J1 Header Pin10", - "", "", "7J1 Header Pin32", "", "", - /* Bank GPIOCLK */ - "", ""; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_boot>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -&spifc { - status = "okay"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - w25q32: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <3000000>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; diff --git a/arch/arm/dts/meson-gxl-s805x.dtsi b/arch/arm/dts/meson-gxl-s805x.dtsi deleted file mode 100644 index 29975849822..00000000000 --- a/arch/arm/dts/meson-gxl-s805x.dtsi +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 BayLibre SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#include "meson-gxl-s905x.dtsi" - -/ { - compatible = "amlogic,s805x", "amlogic,meson-gxl"; -}; - -/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */ -&gpu_opp_table { - opp-744000000 { - status = "disabled"; - }; -}; - -&mali { - /delete-property/ assigned-clocks; - /delete-property/ assigned-clock-rates; -}; diff --git a/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts b/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts deleted file mode 100644 index 100a1cfeea1..00000000000 --- a/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2019 BayLibre SAS. All rights reserved. - * Author: Jerome Brunet <jbrunet@baylibre.com> - */ - -/dts-v1/; - -#include "meson-gxl-s905d.dtsi" -#include "meson-gx-libretech-pc.dtsi" - -/ { - compatible = "libretech,aml-s905d-pc", "amlogic,s905d", - "amlogic,meson-gxl"; - model = "Libre Computer AML-S905D-PC"; -}; diff --git a/arch/arm/dts/meson-gxl-s905d.dtsi b/arch/arm/dts/meson-gxl-s905d.dtsi deleted file mode 100644 index 43321919547..00000000000 --- a/arch/arm/dts/meson-gxl-s905d.dtsi +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione <carlo@endlessm.com> - */ - -#include "meson-gxl.dtsi" -#include "meson-gxl-mali.dtsi" - -/ { - compatible = "amlogic,s905d", "amlogic,meson-gxl"; -}; diff --git a/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts deleted file mode 100644 index a18d6d241a5..00000000000 --- a/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts +++ /dev/null @@ -1,247 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in> - * Copyright (c) 2020 JetHome - * Author: Aleksandr Kazantsev <ak@tvip.ru> - * Author: Alexey Shevelkin <ash@tvip.ru> - * Author: Vyacheslav Bocharov <adeep@lexina.in> - */ - -/dts-v1/; - -#include "meson-gxl.dtsi" - -/ { - compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl"; - model = "JetHome JetHub J80"; - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - reserved-memory { - linux,cma { - size = <0x0 0x1000000>; - }; - }; - - aliases { - serial0 = &uart_AO; /* Console */ - serial1 = &uart_A; /* Bluetooth */ - serial2 = &uart_AO_B; /* Wireless module 1 */ - serial3 = &uart_C; /* Wireless module 2 */ - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; -}; - -&efuse { - bt_mac: bt-mac@6 { - reg = <0x6 0x6>; - }; - - wifi_mac: wifi-mac@c { - reg = <0xc 0x6>; - }; -}; - -&sn { - reg = <0x32 0x20>; -}; - -ð_mac { - reg = <0x0 0x6>; -}; - -&bid { - reg = <0x12 0x20>; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* Wireless SDIO Module */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* Console UART */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -/* S905W only has access to its internal PHY */ -ðmac { - status = "okay"; - phy-mode = "rmii"; - phy-handle = <&internal_phy>; -}; - -&internal_phy { - status = "okay"; - pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; - pinctrl-names = "default"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart_C { - status = "okay"; - pinctrl-0 = <&uart_c_pins>; - pinctrl-names = "default"; -}; - -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; -}; - -&i2c_B { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_b_pins>; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; -}; diff --git a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts deleted file mode 100644 index 02f81839d4e..00000000000 --- a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts +++ /dev/null @@ -1,237 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. - */ - -/dts-v1/; - -#include "meson-gxl-s905x-p212.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/sound/meson-aiu.h> - -/ { - compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Khadas VIM"; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "Function"; - linux,code = <KEY_FN>; - press-threshold-microvolt = <10000>; - }; - }; - - aliases { - serial2 = &uart_AO_B; - ethernet0 = ðmac; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = <KEY_POWER>; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - }; - - led-controller { - compatible = "pwm-leds"; - - led-1 { - label = "vim:red:power"; - pwms = <&pwm_AO_ab 1 7812500 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "KHADAS-VIM"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c_A { - status = "okay"; - pinctrl-0 = <&i2c_a_pins>; - pinctrl-names = "default"; -}; - -&i2c_B { - status = "okay"; - pinctrl-0 = <&i2c_b_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - status = "okay"; - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-output-names = "xin32k"; - }; -}; - -&ir { - linux,rc-map-name = "rc-khadas"; -}; - -&gpio_ao { - gpio-line-names = "UART TX", - "UART RX", - "Power Key In", - "J9 Header Pin35", - "J9 Header Pin16", - "J9 Header Pin15", - "J9 Header Pin33", - "IR In", - "HDMI CEC", - "SYS LED", - /* GPIO_TEST_N */ - ""; -}; - -&gpio { - gpio-line-names = /* Bank GPIOZ */ - "", "", "", "", "", "", "", - "", "", "", "", "", "", "", - "Power OFF", - "VCCK Enable", - /* Bank GPIOH */ - "HDMI HPD", "HDMI SDA", "HDMI SCL", - "HDMI_5V_EN", "SPDIF", - "J9 Header Pin37", - "J9 Header Pin30", - "J9 Header Pin29", - "J9 Header Pin32", - "J9 Header Pin31", - /* Bank BOOT */ - "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", - "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", - "eMMC Clk", "eMMC Reset", "eMMC CMD", - "", "BOOT_MODE", "", "", "eMMC Data Strobe", - /* Bank CARD */ - "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", - "SDCard D3", "SDCard D2", "SDCard Det", - /* Bank GPIODV */ - "", "", "", "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", "", "", "", - "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK", - "VCCK Regulator", "VDDEE Regulator", - /* Bank GPIOX */ - "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2", - "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD", - "WIFI Power Enable", "WIFI WAKE HOST", - "Bluetooth PCM DOUT", "Bluetooth PCM DIN", - "Bluetooth PCM SYNC", "Bluetooth PCM CLK", - "Bluetooth UART TX", "Bluetooth UART RX", - "Bluetooth UART CTS", "Bluetooth UART RTS", - "WIFI 32K", "Bluetooth Enable", - "Bluetooth WAKE HOST", - /* Bank GPIOCLK */ - "", "J9 Header Pin39"; -}; - -&pwm_AO_ab { - status = "okay"; - pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; - pinctrl-names = "default"; - clocks = <&xtal> , <&xtal>; - clock-names = "clkin0", "clkin1" ; -}; - -&pwm_ef { - pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; -}; - -&sd_emmc_a { - max-frequency = <100000000>; -}; - -/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ -&uart_AO { - status = "okay"; -}; - -/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */ -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>; - pinctrl-names = "default"; -}; - -&usb { - dr_mode = "peripheral"; -}; diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts deleted file mode 100644 index 6c4e68e0e62..00000000000 --- a/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts +++ /dev/null @@ -1,313 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 BayLibre, SAS. - * Author: Jerome Brunet <jbrunet@baylibre.com> - */ - -/dts-v1/; - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/sound/meson-aiu.h> - -#include "meson-gxl-s905x.dtsi" - -/ { - compatible = "libretech,aml-s905x-cc-v2", "amlogic,s905x", - "amlogic,meson-gxl"; - model = "Libre Computer AML-S905X-CC V2"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - spi0 = &spifc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - - led-green { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_DISK_ACTIVITY; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcck: regulator-vcck { - compatible = "regulator-fixed"; - regulator-name = "VCCK"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vcc_card: regulator-vcc_card { - compatible = "regulator-fixed"; - regulator-name = "VCC_CARD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddio_ao3v3>; - - gpio = <&gpio GPIOCLK_1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc5v: regulator-vcc5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&ao_5v>; - - gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; - }; - - vddio_ao3v3: regulator-vddio_ao3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddio_card: regulator-vddio-card { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_CARD"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - - regulator-settling-time-up-us = <200>; - regulator-settling-time-down-us = <50000>; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddio_ao3v3>; - regulator-always-on; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC 1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddio_ao3v3>; - regulator-always-on; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "LIBRETECH-CC-V2"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -ðmac { - status = "okay"; -}; - -&internal_phy { - pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - hdmi-supply = <&vcc5v>; - pinctrl-names = "default"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* SD card */ -&sd_emmc_b { - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-ddr50; - max-frequency = <100000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vcc_card>; - vqmmc-supply = <&vddio_card>; - - status = "okay"; -}; - -/* eMMC */ -&sd_emmc_c { - pinctrl-0 = <&emmc_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddio_ao3v3>; - vqmmc-supply = <&vcc_1v8>; - - status = "okay"; -}; - -&spifc { - status = "okay"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - nor_4u1: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <3000000>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&usb2_phy0 { - phy-supply = <&vcc5v>; -}; - -&usb2_phy1 { - phy-supply = <&vcc5v>; -}; diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts deleted file mode 100644 index 82bfabfbd39..00000000000 --- a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts +++ /dev/null @@ -1,356 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Author: Jerome Brunet <jbrunet@baylibre.com> - */ - -/dts-v1/; - -#include <dt-bindings/input/input.h> -#include <dt-bindings/sound/meson-aiu.h> - -#include "meson-gxl-s905x.dtsi" - -/ { - compatible = "libretech,aml-s905x-cc", "amlogic,s905x", - "amlogic,meson-gxl"; - model = "Libre Computer AML-S905X-CC"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - dio2133: analog-amplifier { - compatible = "simple-audio-amplifier"; - sound-name-prefix = "AU2"; - VCC-supply = <&hdmi_5v>; - enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-system { - label = "librecomputer:system-status"; - gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; - default-state = "on"; - panic-indicator; - }; - - led-blue { - label = "librecomputer:blue"; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - hdmi_5v: regulator-hdmi-5v { - compatible = "regulator-fixed"; - - regulator-name = "HDMI_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_card: regulator-vcc-card { - compatible = "regulator-gpio"; - - regulator-name = "VCC_CARD"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - - regulator-settling-time-up-us = <200>; - regulator-settling-time-down-us = <50000>; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - /* This is provided by LDOs on the eMMC daugther card */ - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "LIBRETECH-CC"; - audio-aux-devs = <&dio2133>; - audio-widgets = "Line", "Lineout"; - audio-routing = "AU2 INL", "ACODEC LOLN", - "AU2 INR", "ACODEC LORN", - "Lineout", "AU2 OUTL", - "Lineout", "AU2 OUTR"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - - codec-1 { - sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - - dai-link-3 { - sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; - - codec-0 { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddio_ao18>; - status = "okay"; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - status = "okay"; -}; - -&internal_phy { - pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&gpio_ao { - gpio-line-names = "UART TX", - "UART RX", - "Blue LED", - "SDCard Voltage Switch", - "7J1 Header Pin5", - "7J1 Header Pin3", - "7J1 Header Pin12", - "IR In", - "9J3 Switch HDMI CEC/7J1 Header Pin11", - "7J1 Header Pin13", - /* GPIO_TEST_N */ - "7J1 Header Pin15"; -}; - -&gpio { - gpio-line-names = /* Bank GPIOZ */ - "", "", "", "", "", "", "", - "", "", "", "", "", "", "", - "Eth Link LED", "Eth Activity LED", - /* Bank GPIOH */ - "HDMI HPD", "HDMI SDA", "HDMI SCL", - "HDMI_5V_EN", "9J1 Header Pin2", - "Analog Audio Mute", - "2J3 Header Pin6", - "2J3 Header Pin5", - "2J3 Header Pin4", - "2J3 Header Pin3", - /* Bank BOOT */ - "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", - "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", - "eMMC Clk", "eMMC Reset", "eMMC CMD", - "ALT BOOT MODE", "", "", "", "eMMC Data Strobe", - /* Bank CARD */ - "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", - "SDCard D3", "SDCard D2", "SDCard Det", - /* Bank GPIODV */ - "", "", "", "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", "", "", "", - "Green LED", "VCCK Enable", - "7J1 Header Pin27", "7J1 Header Pin28", - "VCCK Regulator", "VDDEE Regulator", - /* Bank GPIOX */ - "7J1 Header Pin22", "7J1 Header Pin26", - "7J1 Header Pin36", "7J1 Header Pin38", - "7J1 Header Pin40", "7J1 Header Pin37", - "7J1 Header Pin33", "7J1 Header Pin35", - "7J1 Header Pin19", "7J1 Header Pin21", - "7J1 Header Pin24", "7J1 Header Pin23", - "7J1 Header Pin8", "7J1 Header Pin10", - "7J1 Header Pin16", "7J1 Header Pin18", - "7J1 Header Pin32", "7J1 Header Pin29", - "7J1 Header Pin31", - /* Bank GPIOCLK */ - "7J1 Header Pin7", ""; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_card>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&usb2_phy0 { - /* - * even though the schematics don't show it: - * HDMI_5V is also used as supply for the USB VBUS. - */ - phy-supply = <&hdmi_5v>; -}; diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dts b/arch/arm/dts/meson-gxl-s905x-p212.dts deleted file mode 100644 index 9b4ea6a4939..00000000000 --- a/arch/arm/dts/meson-gxl-s905x-p212.dts +++ /dev/null @@ -1,134 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione <carlo@endlessm.com> - */ - -/dts-v1/; - -#include "meson-gxl-s905x-p212.dtsi" -#include <dt-bindings/sound/meson-aiu.h> - -/ { - compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Amlogic Meson GXL (S905X) P212 Development Board"; - - dio2133: analog-amplifier { - compatible = "simple-audio-amplifier"; - sound-name-prefix = "AU2"; - VCC-supply = <&hdmi_5v>; - enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "S905X-P212"; - audio-aux-devs = <&dio2133>; - audio-widgets = "Line", "Lineout"; - audio-routing = "AU2 INL", "ACODEC LOLN", - "AU2 INR", "ACODEC LORN", - "Lineout", "AU2 OUTL", - "Lineout", "AU2 OUTR"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - - codec-1 { - sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - - dai-link-3 { - sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; - - codec-0 { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddio_ao18>; - status = "okay"; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -/* This UART is brought out to the DB9 connector */ -&uart_AO { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi deleted file mode 100644 index a150cc0e18f..00000000000 --- a/arch/arm/dts/meson-gxl-s905x-p212.dtsi +++ /dev/null @@ -1,213 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. - * Based on meson-gx-p23x-q20x.dtsi: - * - Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione <carlo@endlessm.com> - * - Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -/* Common DTSI for devices which are based on the P212 reference board. */ - -#include "meson-gxl-s905x.dtsi" - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - hdmi_5v: regulator-hdmi-5v { - compatible = "regulator-fixed"; - - regulator-name = "HDMI_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; -}; - -ðmac { - status = "okay"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* Wireless SDIO Module */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* This is connected to the Bluetooth module: */ -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&usb2_phy0 { - /* - * HDMI_5V is also used as supply for the USB VBUS. - */ - phy-supply = <&hdmi_5v>; -}; diff --git a/arch/arm/dts/meson-gxl-s905x.dtsi b/arch/arm/dts/meson-gxl-s905x.dtsi deleted file mode 100644 index 40c19f69e9d..00000000000 --- a/arch/arm/dts/meson-gxl-s905x.dtsi +++ /dev/null @@ -1,18 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione <carlo@endlessm.com> - */ - -#include "meson-gxl.dtsi" -#include "meson-gxl-mali.dtsi" - -/ { - compatible = "amlogic,s905x", "amlogic,meson-gxl"; -}; - -/* S905X only has access to its internal PHY */ -ðmac { - phy-mode = "rmii"; - phy-handle = <&internal_phy>; -}; diff --git a/arch/arm/dts/meson-gxl.dtsi b/arch/arm/dts/meson-gxl.dtsi deleted file mode 100644 index 17bcfa4702e..00000000000 --- a/arch/arm/dts/meson-gxl.dtsi +++ /dev/null @@ -1,940 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione <carlo@endlessm.com> - */ - -#include "meson-gx.dtsi" -#include <dt-bindings/clock/gxbb-clkc.h> -#include <dt-bindings/clock/gxbb-aoclkc.h> -#include <dt-bindings/gpio/meson-gxl-gpio.h> -#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> - -/ { - compatible = "amlogic,meson-gxl"; - - soc { - usb: usb@d0078080 { - compatible = "amlogic,meson-gxl-usb-ctrl"; - reg = <0x0 0xd0078080 0x0 0x20>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "usb_ctrl", "ddr"; - resets = <&reset RESET_USB_OTG>; - - dr_mode = "otg"; - - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; - - dwc2: usb@c9100000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xc9100000 0x0 0x40000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB1>; - clock-names = "otg"; - phys = <&usb2_phy1>; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - - dwc3: usb@c9000000 { - compatible = "snps,dwc3"; - reg = <0x0 0xc9000000 0x0 0x100000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - maximum-speed = "high-speed"; - snps,dis_u2_susphy_quirk; - }; - }; - - acodec: audio-controller@c8832000 { - compatible = "amlogic,t9015"; - reg = <0x0 0xc8832000 0x0 0x14>; - #sound-dai-cells = <0>; - sound-name-prefix = "ACODEC"; - clocks = <&clkc CLKID_ACODEC>; - clock-names = "pclk"; - resets = <&reset RESET_ACODEC>; - status = "disabled"; - }; - - crypto: crypto@c883e000 { - compatible = "amlogic,gxl-crypto"; - reg = <0x0 0xc883e000 0x0 0x36>; - interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_BLKMV>; - clock-names = "blkmv"; - status = "okay"; - }; - }; -}; - -&aiu { - compatible = "amlogic,aiu-gxl", "amlogic,aiu"; - clocks = <&clkc CLKID_AIU_GLUE>, - <&clkc CLKID_I2S_OUT>, - <&clkc CLKID_AOCLK_GATE>, - <&clkc CLKID_CTS_AMCLK>, - <&clkc CLKID_MIXER_IFACE>, - <&clkc CLKID_IEC958>, - <&clkc CLKID_IEC958_GATE>, - <&clkc CLKID_CTS_MCLK_I958>, - <&clkc CLKID_CTS_I958>; - clock-names = "pclk", - "i2s_pclk", - "i2s_aoclk", - "i2s_mclk", - "i2s_mixer", - "spdif_pclk", - "spdif_aoclk", - "spdif_mclk", - "spdif_mclk_sel"; - resets = <&reset RESET_AIU>; -}; - -&apb { - usb2_phy0: phy@78000 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x78000 0x0 0x20>; - clocks = <&clkc CLKID_USB>; - clock-names = "phy"; - resets = <&reset RESET_USB_OTG>; - reset-names = "phy"; - status = "okay"; - }; - - usb2_phy1: phy@78020 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x78020 0x0 0x20>; - clocks = <&clkc CLKID_USB>; - clock-names = "phy"; - resets = <&reset RESET_USB_OTG>; - reset-names = "phy"; - status = "okay"; - }; -}; - -&efuse { - clocks = <&clkc CLKID_EFUSE>; -}; - -ðmac { - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; - - mdio0: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; -}; - -&aobus { - pinctrl_aobus: pinctrl@14 { - compatible = "amlogic,meson-gxl-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x00014 0x0 0x8>, - <0x0 0x0002c 0x0 0x4>, - <0x0 0x00024 0x0 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 0 14>; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - bias-disable; - }; - }; - - uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { - mux { - groups = "uart_cts_ao_a", - "uart_rts_ao_a"; - function = "uart_ao"; - bias-disable; - }; - }; - - uart_ao_b_pins: uart_ao_b { - mux { - groups = "uart_tx_ao_b", "uart_rx_ao_b"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - uart_ao_b_0_1_pins: uart_ao_b_0_1 { - mux { - groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { - mux { - groups = "uart_cts_ao_b", - "uart_rts_ao_b"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - remote_input_ao_pins: remote_input_ao { - mux { - groups = "remote_input_ao"; - function = "remote_input_ao"; - bias-disable; - }; - }; - - i2c_ao_pins: i2c_ao { - mux { - groups = "i2c_sck_ao", - "i2c_sda_ao"; - function = "i2c_ao"; - bias-disable; - }; - }; - - pwm_ao_a_3_pins: pwm_ao_a_3 { - mux { - groups = "pwm_ao_a_3"; - function = "pwm_ao_a"; - bias-disable; - }; - }; - - pwm_ao_a_8_pins: pwm_ao_a_8 { - mux { - groups = "pwm_ao_a_8"; - function = "pwm_ao_a"; - bias-disable; - }; - }; - - pwm_ao_b_pins: pwm_ao_b { - mux { - groups = "pwm_ao_b"; - function = "pwm_ao_b"; - bias-disable; - }; - }; - - pwm_ao_b_6_pins: pwm_ao_b_6 { - mux { - groups = "pwm_ao_b_6"; - function = "pwm_ao_b"; - bias-disable; - }; - }; - - i2s_out_ch23_ao_pins: i2s_out_ch23_ao { - mux { - groups = "i2s_out_ch23_ao"; - function = "i2s_out_ao"; - bias-disable; - }; - }; - - i2s_out_ch45_ao_pins: i2s_out_ch45_ao { - mux { - groups = "i2s_out_ch45_ao"; - function = "i2s_out_ao"; - bias-disable; - }; - }; - - spdif_out_ao_6_pins: spdif_out_ao_6 { - mux { - groups = "spdif_out_ao_6"; - function = "spdif_out_ao"; - bias-disable; - }; - }; - - spdif_out_ao_9_pins: spdif_out_ao_9 { - mux { - groups = "spdif_out_ao_9"; - function = "spdif_out_ao"; - bias-disable; - }; - }; - - ao_cec_pins: ao_cec { - mux { - groups = "ao_cec"; - function = "cec_ao"; - bias-disable; - }; - }; - - ee_cec_pins: ee_cec { - mux { - groups = "ee_cec"; - function = "cec_ao"; - bias-disable; - }; - }; - }; -}; - -&cec_AO { - clocks = <&clkc_AO CLKID_AO_CEC_32K>; - clock-names = "core"; -}; - -&clkc_AO { - compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc"; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; -}; - -&gpio_intc { - compatible = "amlogic,meson-gxl-gpio-intc", - "amlogic,meson-gpio-intc"; - status = "okay"; -}; - -&hdmi_tx { - compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMI_SYSTEM_RESET>, - <&reset RESET_HDMI_TX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI_PCLK>, - <&clkc CLKID_CLK81>, - <&clkc CLKID_GCLK_VENCI_INT0>; - clock-names = "isfr", "iahb", "venci"; -}; - -&sysctrl { - clkc: clock-controller { - compatible = "amlogic,gxl-clkc"; - #clock-cells = <1>; - clocks = <&xtal>; - clock-names = "xtal"; - }; -}; - -&hwrng { - clocks = <&clkc CLKID_RNG0>; - clock-names = "core"; -}; - -&i2c_A { - clocks = <&clkc CLKID_I2C>; -}; - -&i2c_AO { - clocks = <&clkc CLKID_AO_I2C>; -}; - -&i2c_B { - clocks = <&clkc CLKID_I2C>; -}; - -&i2c_C { - clocks = <&clkc CLKID_I2C>; -}; - -&periphs { - pinctrl_periphs: pinctrl@4b0 { - compatible = "amlogic,meson-gxl-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@4b0 { - reg = <0x0 0x004b0 0x0 0x28>, - <0x0 0x004e8 0x0 0x14>, - <0x0 0x00520 0x0 0x14>, - <0x0 0x00430 0x0 0x40>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_periphs 0 0 100>; - }; - - emmc_pins: emmc { - mux-0 { - groups = "emmc_nand_d07", - "emmc_cmd"; - function = "emmc"; - bias-pull-up; - }; - - mux-1 { - groups = "emmc_clk"; - function = "emmc"; - bias-disable; - }; - }; - - emmc_ds_pins: emmc-ds { - mux { - groups = "emmc_ds"; - function = "emmc"; - bias-pull-down; - }; - }; - - emmc_clk_gate_pins: emmc_clk_gate { - mux { - groups = "BOOT_8"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - nor_pins: nor { - mux { - groups = "nor_d", - "nor_q", - "nor_c", - "nor_cs"; - function = "nor"; - bias-disable; - }; - }; - - spi_pins: spi-pins { - mux { - groups = "spi_miso", - "spi_mosi", - "spi_sclk"; - function = "spi"; - bias-disable; - }; - }; - - spi_idle_high_pins: spi-idle-high-pins { - mux { - groups = "spi_sclk"; - bias-pull-up; - }; - }; - - spi_idle_low_pins: spi-idle-low-pins { - mux { - groups = "spi_sclk"; - bias-pull-down; - }; - }; - - spi_ss0_pins: spi-ss0 { - mux { - groups = "spi_ss0"; - function = "spi"; - bias-disable; - }; - }; - - sdcard_pins: sdcard { - mux-0 { - groups = "sdcard_d0", - "sdcard_d1", - "sdcard_d2", - "sdcard_d3", - "sdcard_cmd"; - function = "sdcard"; - bias-pull-up; - }; - - mux-1 { - groups = "sdcard_clk"; - function = "sdcard"; - bias-disable; - }; - }; - - sdcard_clk_gate_pins: sdcard_clk_gate { - mux { - groups = "CARD_2"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - sdio_pins: sdio { - mux-0 { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_cmd"; - function = "sdio"; - bias-pull-up; - }; - - mux-1 { - groups = "sdio_clk"; - function = "sdio"; - bias-disable; - }; - }; - - sdio_clk_gate_pins: sdio_clk_gate { - mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - sdio_irq_pins: sdio_irq { - mux { - groups = "sdio_irq"; - function = "sdio"; - bias-disable; - }; - }; - - uart_a_pins: uart_a { - mux { - groups = "uart_tx_a", - "uart_rx_a"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_a_cts_rts_pins: uart_a_cts_rts { - mux { - groups = "uart_cts_a", - "uart_rts_a"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_b_pins: uart_b { - mux { - groups = "uart_tx_b", - "uart_rx_b"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_b_cts_rts_pins: uart_b_cts_rts { - mux { - groups = "uart_cts_b", - "uart_rts_b"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_c_pins: uart_c { - mux { - groups = "uart_tx_c", - "uart_rx_c"; - function = "uart_c"; - bias-disable; - }; - }; - - uart_c_cts_rts_pins: uart_c_cts_rts { - mux { - groups = "uart_cts_c", - "uart_rts_c"; - function = "uart_c"; - bias-disable; - }; - }; - - i2c_a_pins: i2c_a { - mux { - groups = "i2c_sck_a", - "i2c_sda_a"; - function = "i2c_a"; - bias-disable; - }; - }; - - i2c_b_pins: i2c_b { - mux { - groups = "i2c_sck_b", - "i2c_sda_b"; - function = "i2c_b"; - bias-disable; - }; - }; - - i2c_c_pins: i2c_c { - mux { - groups = "i2c_sck_c", - "i2c_sda_c"; - function = "i2c_c"; - bias-disable; - }; - }; - - i2c_c_dv18_pins: i2c_c_dv18 { - mux { - groups = "i2c_sck_c_dv19", - "i2c_sda_c_dv18"; - function = "i2c_c"; - bias-disable; - }; - }; - - eth_pins: eth_c { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_clk_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_rxd2", - "eth_rxd3", - "eth_rgmii_tx_clk", - "eth_tx_en", - "eth_txd0", - "eth_txd1", - "eth_txd2", - "eth_txd3"; - function = "eth"; - bias-disable; - }; - }; - - eth_link_led_pins: eth_link_led { - mux { - groups = "eth_link_led"; - function = "eth_led"; - bias-disable; - }; - }; - - eth_act_led_pins: eth_act_led { - mux { - groups = "eth_act_led"; - function = "eth_led"; - }; - }; - - pwm_a_pins: pwm_a { - mux { - groups = "pwm_a"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_b_pins: pwm_b { - mux { - groups = "pwm_b"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_c_pins: pwm_c { - mux { - groups = "pwm_c"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_d_pins: pwm_d { - mux { - groups = "pwm_d"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_e_pins: pwm_e { - mux { - groups = "pwm_e"; - function = "pwm_e"; - bias-disable; - }; - }; - - pwm_f_clk_pins: pwm_f_clk { - mux { - groups = "pwm_f_clk"; - function = "pwm_f"; - bias-disable; - }; - }; - - pwm_f_x_pins: pwm_f_x { - mux { - groups = "pwm_f_x"; - function = "pwm_f"; - bias-disable; - }; - }; - - hdmi_hpd_pins: hdmi_hpd { - mux { - groups = "hdmi_hpd"; - function = "hdmi_hpd"; - bias-disable; - }; - }; - - hdmi_i2c_pins: hdmi_i2c { - mux { - groups = "hdmi_sda", "hdmi_scl"; - function = "hdmi_i2c"; - bias-disable; - }; - }; - - i2s_am_clk_pins: i2s_am_clk { - mux { - groups = "i2s_am_clk"; - function = "i2s_out"; - bias-disable; - }; - }; - - i2s_out_ao_clk_pins: i2s_out_ao_clk { - mux { - groups = "i2s_out_ao_clk"; - function = "i2s_out"; - bias-disable; - }; - }; - - i2s_out_lr_clk_pins: i2s_out_lr_clk { - mux { - groups = "i2s_out_lr_clk"; - function = "i2s_out"; - bias-disable; - }; - }; - - i2s_out_ch01_pins: i2s_out_ch01 { - mux { - groups = "i2s_out_ch01"; - function = "i2s_out"; - bias-disable; - }; - }; - i2sout_ch23_z_pins: i2sout_ch23_z { - mux { - groups = "i2sout_ch23_z"; - function = "i2s_out"; - bias-disable; - }; - }; - - i2sout_ch45_z_pins: i2sout_ch45_z { - mux { - groups = "i2sout_ch45_z"; - function = "i2s_out"; - bias-disable; - }; - }; - - i2sout_ch67_z_pins: i2sout_ch67_z { - mux { - groups = "i2sout_ch67_z"; - function = "i2s_out"; - bias-disable; - }; - }; - - spdif_out_h_pins: spdif_out_ao_h { - mux { - groups = "spdif_out_h"; - function = "spdif_out"; - bias-disable; - }; - }; - }; - - eth_phy_mux: mdio@558 { - reg = <0x0 0x558 0x0 0xc>; - compatible = "amlogic,gxl-mdio-mux"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "ref"; - mdio-parent-bus = <&mdio0>; - - external_mdio: mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - internal_mdio: mdio@1 { - reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - - internal_phy: ethernet-phy@8 { - compatible = "ethernet-phy-id0181.4400"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <8>; - max-speed = <100>; - }; - }; - }; -}; - -&pwrc { - resets = <&reset RESET_VIU>, - <&reset RESET_VENC>, - <&reset RESET_VCBUS>, - <&reset RESET_BT656>, - <&reset RESET_DVIN_RESET>, - <&reset RESET_RDMA>, - <&reset RESET_VENCI>, - <&reset RESET_VENCP>, - <&reset RESET_VDAC>, - <&reset RESET_VDI6>, - <&reset RESET_VENCL>, - <&reset RESET_VID_LOCK>; - reset-names = "viu", "venc", "vcbus", "bt656", - "dvin", "rdma", "venci", "vencp", - "vdac", "vdi6", "vencl", "vid_lock"; - clocks = <&clkc CLKID_VPU>, - <&clkc CLKID_VAPB>; - clock-names = "vpu", "vapb"; - /* - * VPU clocking is provided by two identical clock paths - * VPU_0 and VPU_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - * Same for VAPB but with a final gate after the glitch free mux. - */ - assigned-clocks = <&clkc CLKID_VPU_0_SEL>, - <&clkc CLKID_VPU_0>, - <&clkc CLKID_VPU>, /* Glitch free mux */ - <&clkc CLKID_VAPB_0_SEL>, - <&clkc CLKID_VAPB_0>, - <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_VPU_0>, - <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VAPB_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>, /* Do Nothing */ - <0>, /* Do Nothing */ - <250000000>, - <0>; /* Do Nothing */ -}; - -&saradc { - compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; - clocks = <&xtal>, - <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SAR_ADC_CLK>, - <&clkc CLKID_SAR_ADC_SEL>; - clock-names = "clkin", "core", "adc_clk", "adc_sel"; -}; - -&sd_emmc_a { - clocks = <&clkc CLKID_SD_EMMC_A>, - <&clkc CLKID_SD_EMMC_A_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_A>; -}; - -&sd_emmc_b { - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; -}; - -&sd_emmc_c { - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; -}; - -&simplefb_hdmi { - clocks = <&clkc CLKID_HDMI_PCLK>, - <&clkc CLKID_CLK81>, - <&clkc CLKID_GCLK_VENCI_INT0>; -}; - -&spicc { - clocks = <&clkc CLKID_SPICC>; - clock-names = "core"; - resets = <&reset RESET_PERIPHS_SPICC>; - num-cs = <1>; -}; - -&spifc { - clocks = <&clkc CLKID_SPI>; -}; - -&uart_A { - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_AO { - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_AO_B { - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_B { - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_C { - clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; - -&vpu { - compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; - power-domains = <&pwrc PWRC_GXBB_VPU_ID>; -}; - -&vdec { - compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec"; - clocks = <&clkc CLKID_DOS_PARSER>, - <&clkc CLKID_DOS>, - <&clkc CLKID_VDEC_1>, - <&clkc CLKID_VDEC_HEVC>; - clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; - resets = <&reset RESET_PARSER>; - reset-names = "esparser"; -}; diff --git a/arch/arm/dts/meson-gxm-gt1-ultimate.dts b/arch/arm/dts/meson-gxm-gt1-ultimate.dts deleted file mode 100644 index 2c267884cc1..00000000000 --- a/arch/arm/dts/meson-gxm-gt1-ultimate.dts +++ /dev/null @@ -1,91 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) Christian Hewitt <christianshewitt@gmail.com> - */ - -/dts-v1/; - -#include "meson-gxm.dtsi" -#include "meson-gx-p23x-q20x.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm"; - model = "Beelink GT1 Ultimate"; - - leds { - compatible = "gpio-leds"; - - led-white { - color = <LED_COLOR_ID_WHITE>; - function = LED_FUNCTION_POWER; - gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - panic-indicator; - }; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "update"; - linux,code = <KEY_VENDOR>; - press-threshold-microvolt = <10000>; - }; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>; - pinctrl-names = "default"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; - phy-mode = "rgmii"; -}; - -&external_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_15 */ - interrupts = <25 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&ir { - linux,rc-map-name = "rc-beelink-gs1"; -}; - -&sd_emmc_a { - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; diff --git a/arch/arm/dts/meson-gxm-khadas-vim2.dts b/arch/arm/dts/meson-gxm-khadas-vim2.dts deleted file mode 100644 index 74897a15489..00000000000 --- a/arch/arm/dts/meson-gxm-khadas-vim2.dts +++ /dev/null @@ -1,424 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. - * Copyright (c) 2017 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; - -#include "meson-gxm.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/sound/meson-aiu.h> - -/ { - compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm"; - model = "Khadas VIM2"; - - aliases { - serial0 = &uart_AO; - serial2 = &uart_AO_B; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "Function"; - linux,code = <KEY_FN>; - press-threshold-microvolt = <10000>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - gpio_fan: gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH - &gpio GPIODV_15 GPIO_ACTIVE_HIGH>; - /* Dummy RPM values since fan is optional */ - gpio-fan,speed-map = - <0 0>, - <1 1>, - <2 2>, - <3 3>; - #cooling-cells = <2>; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = <KEY_POWER>; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - led-controller { - compatible = "pwm-leds"; - - led-1 { - label = "vim:red:power"; - pwms = <&pwm_AO_ab 1 7812500 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - hdmi_5v: regulator-hdmi-5v { - compatible = "regulator-fixed"; - - regulator-name = "HDMI_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "KHADAS-VIM2"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu_cooling_maps { - map0 { - cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>; - }; - - map1 { - cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>, - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>; - pinctrl-names = "default"; - - /* Select external PHY by default */ - phy-handle = <&external_phy>; - - amlogic,tx-delay-ns = <2>; - - /* External PHY is in RGMII */ - phy-mode = "rgmii"; - - status = "okay"; -}; - -&external_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_15 */ - interrupts = <25 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c_A { - status = "okay"; - pinctrl-0 = <&i2c_a_pins>; - pinctrl-names = "default"; -}; - -&i2c_B { - status = "okay"; - pinctrl-0 = <&i2c_b_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - status = "okay"; - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-output-names = "xin32k"; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - linux,rc-map-name = "rc-khadas"; -}; - -&pwm_AO_ab { - status = "okay"; - pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* - * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe - * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled - */ -&spifc { - status = "disabled"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - w25q32: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q16", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - }; -}; - -/* This one is connected to the Bluetooth module */ -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */ -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>; - pinctrl-names = "default"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -&usb { - status = "okay"; - dr_mode = "peripheral"; -}; diff --git a/arch/arm/dts/meson-gxm-s912-libretech-pc.dts b/arch/arm/dts/meson-gxm-s912-libretech-pc.dts deleted file mode 100644 index 444c249863c..00000000000 --- a/arch/arm/dts/meson-gxm-s912-libretech-pc.dts +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2019 BayLibre SAS. All rights reserved. - * Author: Jerome Brunet <jbrunet@baylibre.com> - */ - -/dts-v1/; - -#include "meson-gxm.dtsi" -#include "meson-gx-libretech-pc.dtsi" - -/ { - compatible = "libretech,aml-s912-pc", "amlogic,s912", - "amlogic,meson-gxm"; - model = "Libre Computer AML-S912-PC"; - - typec2_vbus: regulator-typec2_vbus { - compatible = "regulator-fixed"; - regulator-name = "TYPEC2_VBUS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v>; - - gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&pinctrl_periphs { - /* - * Make sure the irq pin of the TYPE C controller is not driven - * by the SoC. - */ - fusb302_irq_pins: fusb302_irq { - mux { - groups = "GPIODV_0"; - function = "gpio_periphs"; - bias-pull-up; - output-disable; - }; - }; -}; - -&i2c_C { - fusb302@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - - pinctrl-0 = <&fusb302_irq_pins>; - pinctrl-names = "default"; - interrupt-parent = <&gpio_intc>; - interrupts = <59 IRQ_TYPE_LEVEL_LOW>; - - vbus-supply = <&typec2_vbus>; - - status = "okay"; - }; -}; - -&usb2_phy2 { - phy-supply = <&typec2_vbus>; -}; diff --git a/arch/arm/dts/meson-gxm-wetek-core2.dts b/arch/arm/dts/meson-gxm-wetek-core2.dts deleted file mode 100644 index f8c40340b9c..00000000000 --- a/arch/arm/dts/meson-gxm-wetek-core2.dts +++ /dev/null @@ -1,85 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com> - */ - -/dts-v1/; - -#include "meson-gxm.dtsi" -#include "meson-gx-p23x-q20x.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm"; - model = "WeTek Core 2"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */ - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-update { - label = "update"; - linux,code = <KEY_VENDOR>; - press-threshold-microvolt = <10000>; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - button-power { - label = "power"; - linux,code = <KEY_POWER>; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* Disabled as Realtek RTL8152 USB provides Ethernet */ -ðmac { - status = "disabled"; -}; - -&internal_phy { - status = "disabled"; -}; - -&ir { - linux,rc-map-name = "rc-wetek-play2"; -}; - -/* This is connected to the Bluetooth module: */ -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; diff --git a/arch/arm/dts/meson-gxm.dtsi b/arch/arm/dts/meson-gxm.dtsi deleted file mode 100644 index 411cc312fc6..00000000000 --- a/arch/arm/dts/meson-gxm.dtsi +++ /dev/null @@ -1,216 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione <carlo@endlessm.com> - */ - -#include "meson-gxl.dtsi" - -/ { - compatible = "amlogic,meson-gxm"; - - cpus { - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - core1 { - cpu = <&cpu1>; - }; - core2 { - cpu = <&cpu2>; - }; - core3 { - cpu = <&cpu3>; - }; - }; - - cluster1 { - core0 { - cpu = <&cpu4>; - }; - core1 { - cpu = <&cpu5>; - }; - core2 { - cpu = <&cpu6>; - }; - core3 { - cpu = <&cpu7>; - }; - }; - }; - - cpu0: cpu@0 { - capacity-dmips-mhz = <1024>; - }; - - cpu1: cpu@1 { - capacity-dmips-mhz = <1024>; - }; - - cpu2: cpu@2 { - capacity-dmips-mhz = <1024>; - }; - - cpu3: cpu@3 { - capacity-dmips-mhz = <1024>; - }; - - cpu4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x100>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 1>; - #cooling-cells = <2>; - }; - - cpu5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x101>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 1>; - #cooling-cells = <2>; - }; - - cpu6: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x102>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 1>; - #cooling-cells = <2>; - }; - - cpu7: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x103>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 1>; - #cooling-cells = <2>; - }; - }; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-125000000 { - opp-hz = /bits/ 64 <125000000>; - opp-microvolt = <950000>; - }; - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <950000>; - }; - opp-285714285 { - opp-hz = /bits/ 64 <285714285>; - opp-microvolt = <950000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <950000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <950000>; - }; - opp-666666666 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <950000>; - }; - }; -}; - -&apb { - usb2_phy2: phy@78040 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x78040 0x0 0x20>; - clocks = <&clkc CLKID_USB>; - clock-names = "phy"; - resets = <&reset RESET_USB_OTG>; - reset-names = "phy"; - status = "okay"; - }; - - mali: gpu@c0000 { - compatible = "amlogic,meson-gxm-mali", "arm,mali-t820"; - reg = <0x0 0xc0000 0x0 0x40000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&clkc CLKID_MALI>; - resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>; - operating-points-v2 = <&gpu_opp_table>; - }; -}; - -&clkc_AO { - compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc"; -}; - -&cpu_cooling_maps { - map0 { - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; -}; - -&saradc { - compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc"; -}; - -&scpi_dvfs { - clock-indices = <0 1>; - clock-output-names = "vbig", "vlittle"; -}; - -&vpu { - compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; -}; - -&hdmi_tx { - compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; -}; - -&usb { - compatible = "amlogic,meson-gxm-usb-ctrl"; - - phy-names = "usb2-phy0", "usb2-phy1", "usb2-phy2"; - phys = <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; -}; - -&vdec { - compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec"; -}; diff --git a/arch/arm/dts/meson-khadas-vim3.dtsi b/arch/arm/dts/meson-khadas-vim3.dtsi deleted file mode 100644 index 3cf4ecb6d52..00000000000 --- a/arch/arm/dts/meson-khadas-vim3.dtsi +++ /dev/null @@ -1,534 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> - */ - -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - rtc0 = &rtc; - rtc1 = &vrtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "Function"; - linux,code = <KEY_FN>; - press-threshold-microvolt = <10000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-white { - color = <LED_COLOR_ID_WHITE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-red { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = <KEY_POWER>; - gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vsys_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vsys_3v3>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vsys_3v3: regulator-vsys_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VSYS_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - usb_pwr: regulator-usb_pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - - sound { - compatible = "amlogic,axg-sound-card"; - model = "KHADAS-VIM3"; - audio-aux-devs = <&tdmin_a>, <&tdmout_a>; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", - "TDMOUT_A IN 1", "FRDDR_B OUT 0", - "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT", - "TDMIN_A IN 0", "TDM_A Capture", - "TDMIN_A IN 3", "TDM_A Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-6 { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - }; - - /* hdmi glue */ - dai-link-7 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu_thermal { - trips { - cpu_active: cpu-active { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - }; - - cooling-maps { - map { - trip = <&cpu_active>; - cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; - pinctrl-names = "default"; - - khadas_mcu: system-controller@18 { - compatible = "khadas,mcu"; - reg = <0x18>; - #cooling-cells = <2>; - }; - - gpio_expander: gpio-controller@20 { - compatible = "ti,tca6408"; - reg = <0x20>; - vcc-supply = <&vcc_3v3>; - gpio-controller; - #gpio-cells = <2>; - }; - - rtc: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - linux,rc-map-name = "rc-khadas"; -}; - -&pcie { - reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vsys_3v3>; - vqmmc-supply = <&vddao_1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vsys_3v3>; - vqmmc-supply = <&vsys_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - -/* - * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS - * and eMMC Data 4 to 7 pins. - * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, - * and change bus-width to 4 then spifc can be enabled. - */ -&spifc { - status = "disabled"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - w25q128: spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128fw", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - }; -}; - -&tdmif_a { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmout_a { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb2_phy0 { - phy-supply = <&dc_in>; -}; - -&usb2_phy1 { - phy-supply = <&usb_pwr>; -}; - -&usb3_pcie_phy { - phy-supply = <&usb_pwr>; -}; - -&usb { - status = "okay"; - dr_mode = "peripheral"; -}; diff --git a/arch/arm/dts/meson-sm1-bananapi-m2-pro.dts b/arch/arm/dts/meson-sm1-bananapi-m2-pro.dts deleted file mode 100644 index 586034316ec..00000000000 --- a/arch/arm/dts/meson-sm1-bananapi-m2-pro.dts +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 BayLibre SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; - -#include "meson-sm1-bananapi.dtsi" -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "bananapi,bpi-m2-pro", "amlogic,sm1"; - model = "Banana Pi BPI-M2-PRO"; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "BPI-M2-PRO"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&clkc_audio { - status = "okay"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-sm1-bananapi-m5.dts b/arch/arm/dts/meson-sm1-bananapi-m5.dts deleted file mode 100644 index f045bf85163..00000000000 --- a/arch/arm/dts/meson-sm1-bananapi-m5.dts +++ /dev/null @@ -1,221 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 BayLibre SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; - -#include "meson-sm1-bananapi.dtsi" -#include <dt-bindings/sound/meson-g12a-toacodec.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "bananapi,bpi-m5", "amlogic,sm1"; - model = "Banana Pi BPI-M5"; - - /* TOFIX: handle CVBS_DET on SARADC channel 0 */ - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "BPI-M5"; - audio-widgets = "Line", "Lineout"; - audio-aux-devs = <&tdmout_b>, <&tdmout_c>, - <&tdmin_a>, <&tdmin_b>, <&tdmin_c>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TDMOUT_C IN 0", "FRDDR_A OUT 2", - "TDMOUT_C IN 1", "FRDDR_B OUT 2", - "TDMOUT_C IN 2", "FRDDR_C OUT 2", - "TDM_C Playback", "TDMOUT_C OUT", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 4", "TDM_B Loopback", - "TDMIN_C IN 4", "TDM_B Loopback", - "TDMIN_A IN 5", "TDM_C Loopback", - "TDMIN_B IN 5", "TDM_C Loopback", - "TDMIN_C IN 5", "TDM_C Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT", - "TODDR_A IN 2", "TDMIN_C OUT", - "TODDR_B IN 2", "TDMIN_C OUT", - "TODDR_C IN 2", "TDMIN_C OUT", - "Lineout", "ACODEC LOLP", - "Lineout", "ACODEC LORP"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-6 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - - codec-1 { - sound-dai = <&toacodec TOACODEC_IN_B>; - }; - }; - - /* i2s jack output interface */ - dai-link-7 { - sound-dai = <&tdmif_c>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; - }; - - codec-1 { - sound-dai = <&toacodec TOACODEC_IN_C>; - }; - }; - - /* hdmi glue */ - dai-link-8 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - - /* acodec glue */ - dai-link-9 { - sound-dai = <&toacodec TOACODEC_OUT>; - - codec { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddao_1v8>; - status = "okay"; -}; - - -&clkc_audio { - status = "okay"; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmif_c { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmin_c { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tdmout_c { - status = "okay"; -}; - -&toacodec { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-sm1-bananapi.dtsi b/arch/arm/dts/meson-sm1-bananapi.dtsi deleted file mode 100644 index 17045ff81c6..00000000000 --- a/arch/arm/dts/meson-sm1-bananapi.dtsi +++ /dev/null @@ -1,435 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 BayLibre SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#include "meson-sm1.dtsi" -#include <dt-bindings/leds/common.h> -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> - -/ { - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - button-sw3 { - label = "SW3"; - linux,code = <BTN_3>; - press-threshold-microvolt = <1700000>; - }; - }; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key { - label = "SW1"; - linux,code = <BTN_1>; - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-green { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - - led-blue { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddio_c: regulator-vddio_c { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_C"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - - gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>; - gpios-states = <1>; - - states = <1800000 0>, - <3300000 1>; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - vddcpu: regulator-vddcpu { - /* - * SY8120B1ABC DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - pwm-supply = <&dc_in>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - /* USB Hub Power Enable */ - vl_pwr_en: regulator-vl_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "VL_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&arb { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii-txid"; - phy-handle = <&external_phy>; -}; - -&gpio { - gpio-line-names = - /* GPIOZ */ - "ETH_MDIO", /* GPIOZ_0 */ - "ETH_MDC", /* GPIOZ_1 */ - "ETH_RXCLK", /* GPIOZ_2 */ - "ETH_RX_DV", /* GPIOZ_3 */ - "ETH_RXD0", /* GPIOZ_4 */ - "ETH_RXD1", /* GPIOZ_5 */ - "ETH_RXD2", /* GPIOZ_6 */ - "ETH_RXD3", /* GPIOZ_7 */ - "ETH_TXCLK", /* GPIOZ_8 */ - "ETH_TXEN", /* GPIOZ_9 */ - "ETH_TXD0", /* GPIOZ_10 */ - "ETH_TXD1", /* GPIOZ_11 */ - "ETH_TXD2", /* GPIOZ_12 */ - "ETH_TXD3", /* GPIOZ_13 */ - "ETH_INTR", /* GPIOZ_14 */ - "ETH_NRST", /* GPIOZ_15 */ - /* GPIOH */ - "HDMI_SDA", /* GPIOH_0 */ - "HDMI_SCL", /* GPIOH_1 */ - "HDMI_HPD", /* GPIOH_2 */ - "HDMI_CEC", /* GPIOH_3 */ - "VL-RST_N", /* GPIOH_4 */ - "CON1-P36", /* GPIOH_5 */ - "VL-PWREN", /* GPIOH_6 */ - "WiFi_3V3_1V8", /* GPIOH_7 */ - "TFLASH_VDD_EN", /* GPIOH_8 */ - /* BOOT */ - "eMMC_D0", /* BOOT_0 */ - "eMMC_D1", /* BOOT_1 */ - "eMMC_D2", /* BOOT_2 */ - "eMMC_D3", /* BOOT_3 */ - "eMMC_D4", /* BOOT_4 */ - "eMMC_D5", /* BOOT_5 */ - "eMMC_D6", /* BOOT_6 */ - "eMMC_D7", /* BOOT_7 */ - "eMMC_CLK", /* BOOT_8 */ - "", - "eMMC_CMD", /* BOOT_10 */ - "", - "eMMC_RST#", /* BOOT_12 */ - "eMMC_DS", /* BOOT_13 */ - "", "", - /* GPIOC */ - "SD_D0_B", /* GPIOC_0 */ - "SD_D1_B", /* GPIOC_1 */ - "SD_D2_B", /* GPIOC_2 */ - "SD_D3_B", /* GPIOC_3 */ - "SD_CLK_B", /* GPIOC_4 */ - "SD_CMD_B", /* GPIOC_5 */ - "CARD_EN_DET", /* GPIOC_6 */ - "", - /* GPIOA */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", - "CON1-P27", /* GPIOA_14 */ - "CON1-P28", /* GPIOA_15 */ - /* GPIOX */ - "CON1-P16", /* GPIOX_0 */ - "CON1-P18", /* GPIOX_1 */ - "CON1-P22", /* GPIOX_2 */ - "CON1-P11", /* GPIOX_3 */ - "CON1-P13", /* GPIOX_4 */ - "CON1-P07", /* GPIOX_5 */ - "CON1-P33", /* GPIOX_6 */ - "CON1-P15", /* GPIOX_7 */ - "CON1-P19", /* GPIOX_8 */ - "CON1-P21", /* GPIOX_9 */ - "CON1-P24", /* GPIOX_10 */ - "CON1-P23", /* GPIOX_11 */ - "CON1-P08", /* GPIOX_12 */ - "CON1-P10", /* GPIOX_13 */ - "CON1-P29", /* GPIOX_14 */ - "CON1-P31", /* GPIOX_15 */ - "CON1-P26", /* GPIOX_16 */ - "CON1-P03", /* GPIOX_17 */ - "CON1-P05", /* GPIOX_18 */ - "CON1-P32"; /* GPIOX_19 */ - - /* - * WARNING: The USB Hub needs a reset signal to be turned high in - * order to be detected by the USB Controller. This signal should - * be handled by a USB specific power sequence to reset the Hub - * when the USB bus is powered down. - */ - usb-hub-hog { - gpio-hog; - gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "DEBUG TX", /* GPIOAO_0 */ - "DEBUG RX", /* GPIOAO_1 */ - "SYS_LED2", /* GPIOAO_2 */ - "UPDATE_KEY", /* GPIOAO_3 */ - "CON1-P40", /* GPIOAO_4 */ - "IR_IN", /* GPIOAO_5 */ - "TF_3V3N_1V8_EN", /* GPIOAO_6 */ - "CON1-P35", /* GPIOAO_7 */ - "CON1-P12", /* GPIOAO_8 */ - "CON1-P37", /* GPIOAO_9 */ - "CON1-P38", /* GPIOAO_10 */ - "SYS_LED", /* GPIOAO_11 */ - /* GPIOE */ - "VDDEE_PWM", /* GPIOE_0 */ - "VDDCPU_PWM", /* GPIOE_1 */ - "TF_PWR_EN"; /* GPIOE_2 */ -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&dc_in>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - /* TOFIX: SD card is barely usable in SDR modes */ - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&vddio_c>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; -}; - -&usb2_phy0 { - phy-supply = <&dc_in>; -}; - -&usb2_phy1 { - /* Enable the hub which is connected to this port */ - phy-supply = <&vl_pwr_en>; -}; diff --git a/arch/arm/dts/meson-sm1-khadas-vim3l.dts b/arch/arm/dts/meson-sm1-khadas-vim3l.dts deleted file mode 100644 index f2c09814359..00000000000 --- a/arch/arm/dts/meson-sm1-khadas-vim3l.dts +++ /dev/null @@ -1,113 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; - -#include "meson-sm1.dtsi" -#include "meson-khadas-vim3.dtsi" -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "khadas,vim3l", "amlogic,sm1"; - model = "Khadas VIM3L"; - - vddcpu: regulator-vddcpu { - /* - * Silergy SY8030DEC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - vin-supply = <&vsys_3v3>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - sound { - model = "G12B-KHADAS-VIM3L"; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", - "TDMOUT_A IN 1", "FRDDR_B OUT 0", - "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT", - "TDMIN_A IN 0", "TDM_A Capture", - "TDMIN_A IN 13", "TDM_A Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT"; - }; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -/* - * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential - * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between - * an USB3.0 Type A connector and a M.2 Key M slot. - * The PHY driving these differential lines is shared between - * the USB3.0 controller and the PCIe Controller, thus only - * a single controller can use it. - * If the MCU is configured to mux the PCIe/USB3.0 differential lines - * to the M.2 Key M slot, uncomment the following block to disable - * USB3.0 from the USB Complex and enable the PCIe controller. - * The End User is not expected to uncomment the following except for - * testing purposes, but instead rely on the firmware/bootloader to - * update these nodes accordingly if PCIe mode is selected by the MCU. - */ -/* -&pcie { - status = "okay"; -}; - -&usb { - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; -}; - */ - -&sd_emmc_a { - sd-uhs-sdr50; -}; diff --git a/arch/arm/dts/meson-sm1-odroid-c4.dts b/arch/arm/dts/meson-sm1-odroid-c4.dts deleted file mode 100644 index 8c30ce63686..00000000000 --- a/arch/arm/dts/meson-sm1-odroid-c4.dts +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com> - */ - -/dts-v1/; - -#include "meson-sm1-odroid.dtsi" - -/ { - compatible = "hardkernel,odroid-c4", "amlogic,sm1"; - model = "Hardkernel ODROID-C4"; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - }; - - sound { - model = "ODROID-C4"; - }; -}; - -&gpio { - /* - * WARNING: The USB Hub on the Odroid-C4 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - hog-0 { - gpio-hog; - gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&ir { - linux,rc-map-name = "rc-odroid"; -}; diff --git a/arch/arm/dts/meson-sm1-odroid-hc4.dts b/arch/arm/dts/meson-sm1-odroid-hc4.dts deleted file mode 100644 index f3f953225bf..00000000000 --- a/arch/arm/dts/meson-sm1-odroid-hc4.dts +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com> - */ - -/dts-v1/; - -#include "meson-sm1-odroid.dtsi" - -/ { - compatible = "hardkernel,odroid-hc4", "amlogic,sm1"; - model = "Hardkernel ODROID-HC4"; - - aliases { - rtc0 = &rtc; - rtc1 = &vrtc; - }; - - fan0: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - cooling-min-state = <0>; - cooling-max-state = <3>; - cooling-levels = <0 120 170 220>; - pwms = <&pwm_cd 1 40000 0>; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - - led-red { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_POWER; - gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - /* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */ - p12v_0: regulator-p12v_0 { - compatible = "regulator-fixed"; - regulator-name = "P12V_0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - /* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */ - p12v_1: regulator-p12v_1 { - compatible = "regulator-fixed"; - regulator-name = "P12V_1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - sound { - model = "ODROID-HC4"; - }; -}; - -&cpu_thermal { - cooling-maps { - map { - trip = <&cpu_passive>; - cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&ir { - linux,rc-map-name = "rc-odroid"; -}; - -&i2c2 { - status = "okay"; - pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - status = "okay"; - compatible = "nxp,pcf8563"; - reg = <0x51>; - wakeup-source; - }; -}; - -&pcie { - status = "okay"; - reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; -}; - -&pwm_cd { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pwm_d_x6_pins>; -}; - -&sd_emmc_c { - status = "disabled"; -}; - -&spifc { - status = "okay"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - }; -}; - -&usb { - phys = <&usb2_phy1>; - phy-names = "usb2-phy1"; -}; - -&usb2_phy0 { - status = "disabled"; -}; diff --git a/arch/arm/dts/meson-sm1-odroid.dtsi b/arch/arm/dts/meson-sm1-odroid.dtsi deleted file mode 100644 index fd0ad85c165..00000000000 --- a/arch/arm/dts/meson-sm1-odroid.dtsi +++ /dev/null @@ -1,449 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com> - */ - -#include "meson-sm1.dtsi" -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - tf_io: gpio-regulator-tf_io { - compatible = "regulator-gpio"; - - regulator-name = "TF_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_5v>; - - enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - - gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&main_12v>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu: regulator-vddcpu { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - vin-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the microUSB port power enable */ - gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - audio-aux-devs = <&tdmout_b>; - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - /* 8ch hdmi interface */ - dai-link-3 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* hdmi glue */ - dai-link-4 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&arb { - status = "okay"; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&gpio { - gpio-line-names = - /* GPIOZ */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOH */ - "", "", "", "", "", - "PIN_36", /* GPIOH_5 */ - "PIN_26", /* GPIOH_6 */ - "PIN_32", /* GPIOH_7 */ - "", - /* BOOT */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* GPIOC */ - "", "", "", "", "", "", "", "", - /* GPIOA */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", - "PIN_27", /* GPIOA_14 */ - "PIN_28", /* GPIOA_15 */ - /* GPIOX */ - "PIN_16", /* GPIOX_0 */ - "PIN_18", /* GPIOX_1 */ - "PIN_22", /* GPIOX_2 */ - "PIN_11", /* GPIOX_3 */ - "PIN_13", /* GPIOX_4 */ - "PIN_7", /* GPIOX_5 */ - "PIN_33", /* GPIOX_6 */ - "PIN_15", /* GPIOX_7 */ - "PIN_19", /* GPIOX_8 */ - "PIN_21", /* GPIOX_9 */ - "PIN_24", /* GPIOX_10 */ - "PIN_23", /* GPIOX_11 */ - "PIN_8", /* GPIOX_12 */ - "PIN_10", /* GPIOX_13 */ - "PIN_29", /* GPIOX_14 */ - "PIN_31", /* GPIOX_15 */ - "PIN_12", /* GPIOX_16 */ - "PIN_3", /* GPIOX_17 */ - "PIN_5", /* GPIOX_18 */ - "PIN_35"; /* GPIOX_19 */ -}; - -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "", "", "", "", - "PIN_47", /* GPIOAO_4 */ - "", "", - "PIN_45", /* GPIOAO_7 */ - "PIN_46", /* GPIOAO_8 */ - "PIN_44", /* GPIOAO_9 */ - "PIN_42", /* GPIOAO_10 */ - "", - /* GPIOE */ - "", "", ""; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <200000000>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&tf_io>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - vbus-supply = <&usb_pwr_en>; -}; - -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; - diff --git a/arch/arm/dts/meson-sm1-sei610.dts b/arch/arm/dts/meson-sm1-sei610.dts deleted file mode 100644 index 2194a778973..00000000000 --- a/arch/arm/dts/meson-sm1-sei610.dts +++ /dev/null @@ -1,616 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre SAS. All rights reserved. - */ - -/dts-v1/; - -#include "meson-sm1.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> - -/ { - compatible = "seirobotics,sei610", "amlogic,sm1"; - model = "SEI Robotics SEI610"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - mono_dac: audio-codec-0 { - compatible = "maxim,max98357a"; - #sound-dai-cells = <0>; - sound-name-prefix = "U16"; - sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; - }; - - dmics: audio-codec-1 { - #sound-dai-cells = <0>; - compatible = "dmic-codec"; - num-channels = <2>; - wakeup-delay-ms = <50>; - status = "okay"; - sound-name-prefix = "MIC"; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key1 { - label = "A"; - linux,code = <BTN_0>; - gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <34 IRQ_TYPE_EDGE_BOTH>; - }; - - key2 { - label = "B"; - linux,code = <BTN_1>; - gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <35 IRQ_TYPE_EDGE_BOTH>; - }; - - key3 { - label = "C"; - linux,code = <BTN_2>; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; - }; - - mic_mute { - label = "MicMute"; - linux,code = <SW_MUTE_DEVICE>; - linux,input-type = <EV_SW>; - gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <99 IRQ_TYPE_EDGE_BOTH>; - }; - - power_key { - label = "PowerKey"; - linux,code = <KEY_POWER>; - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - led-controller-1 { - compatible = "gpio-leds"; - - led-1 { - label = "sei610:blue:bt"; - gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - default-state = "off"; - }; - }; - - led-controller-2 { - compatible = "pwm-leds"; - - led-2 { - label = "sei610:red:power"; - pwms = <&pwm_AO_ab 0 30518 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - active-low; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - /* Used by Tuner, RGB Led & IR Emitter LED array */ - vddao_3v3_t: regulator-vddao_3v3_t { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3_T"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-low; - regulator-always-on; - }; - - vddcpu: regulator-vddcpu { - /* - * SY8120B1ABC DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - vin-supply = <&dc_in>; - - pwms = <&pwm_AO_cd 1 1500 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddio_ao1v8: regulator-vddio_ao1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "SEI610"; - audio-aux-devs = <&tdmout_a>, <&tdmout_b>, - <&tdmin_a>, <&tdmin_b>; - audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", - "TDMOUT_A IN 1", "FRDDR_B OUT 0", - "TDMOUT_A IN 2", "FRDDR_C OUT 0", - "TDM_A Playback", "TDMOUT_A OUT", - "TDMOUT_B IN 0", "FRDDR_A OUT 1", - "TDMOUT_B IN 1", "FRDDR_B OUT 1", - "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT", - "TODDR_A IN 4", "PDM Capture", - "TODDR_B IN 4", "PDM Capture", - "TODDR_C IN 4", "PDM Capture", - "TDMIN_A IN 0", "TDM_A Capture", - "TDMIN_A IN 3", "TDM_A Loopback", - "TDMIN_B IN 0", "TDM_A Capture", - "TDMIN_B IN 3", "TDM_A Loopback", - "TDMIN_A IN 1", "TDM_B Capture", - "TDMIN_A IN 4", "TDM_B Loopback", - "TDMIN_B IN 1", "TDM_B Capture", - "TDMIN_B IN 4", "TDM_B Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT"; - - assigned-clocks = <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - /* internal speaker interface */ - dai-link-6 { - sound-dai = <&tdmif_a>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&mono_dac>; - }; - - codec-1 { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; - }; - }; - - /* 8ch hdmi interface */ - dai-link-7 { - sound-dai = <&tdmif_b>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-0 = <1 1>; - dai-tdm-slot-tx-mask-1 = <1 1>; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-tx-mask-3 = <1 1>; - mclk-fs = <256>; - - codec { - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; - }; - }; - - /* internal digital mics */ - dai-link-8 { - sound-dai = <&pdm>; - - codec { - sound-dai = <&dmics>; - }; - }; - - /* hdmi glue */ - dai-link-9 { - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; - - codec { - sound-dai = <&hdmi_tx>; - }; - }; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; -}; - -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; - pinctrl-names = "default"; - status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - -ðmac { - status = "okay"; - phy-handle = <&internal_ephy>; - phy-mode = "rmii"; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c3 { - status = "okay"; - pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pdm { - pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pwm_AO_ab { - status = "okay"; - pinctrl-0 = <&pwm_ao_a_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao1v8>; -}; - -/* SDIO */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr50; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_ao1v8>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - non-removable; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - -&tdmif_a { - pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; - pinctrl-names = "default"; - status = "okay"; - - assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, - <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; - assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - assigned-clock-rates = <0>, <0>; -}; - -&tdmif_b { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmout_a { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&tohdmitx { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - interrupt-parent = <&gpio_intc>; - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wakeup"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - vbat-supply = <&vddao_3v3>; - vddio-supply = <&vddio_ao1v8>; - }; -}; - -/* Exposed via the on-board USB to Serial FT232RL IC */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "otg"; -}; diff --git a/arch/arm/dts/meson-sm1.dtsi b/arch/arm/dts/meson-sm1.dtsi deleted file mode 100644 index 56ca0ba2241..00000000000 --- a/arch/arm/dts/meson-sm1.dtsi +++ /dev/null @@ -1,550 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#include "meson-g12-common.dtsi" -#include <dt-bindings/clock/axg-audio-clkc.h> -#include <dt-bindings/power/meson-sm1-power.h> -#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> -#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> - -/ { - compatible = "amlogic,sm1"; - - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - #cooling-cells = <2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - }; - }; - - cpu_opp_table: opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <770000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <780000>; - }; - - opp-1404000000 { - opp-hz = /bits/ 64 <1404000000>; - opp-microvolt = <790000>; - }; - - opp-1500000000 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <800000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <810000>; - }; - - opp-1704000000 { - opp-hz = /bits/ 64 <1704000000>; - opp-microvolt = <850000>; - }; - - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <900000>; - }; - - opp-1908000000 { - opp-hz = /bits/ 64 <1908000000>; - opp-microvolt = <950000>; - }; - }; -}; - -&apb { - audio: bus@60000 { - compatible = "simple-bus"; - reg = <0x0 0x60000 0x0 0x1000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>; - - clkc_audio: clock-controller@0 { - status = "disabled"; - compatible = "amlogic,sm1-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - #reset-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_FCLK_DIV5>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,sm1-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>, - <&clkc_audio AUD_RESET_TODDR_A>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <8192>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,sm1-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>, - <&clkc_audio AUD_RESET_TODDR_B>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,sm1-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>, - <&clkc_audio AUD_RESET_TODDR_C>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,sm1-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>, - <&clkc_audio AUD_RESET_FRDDR_A>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <512>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,sm1-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>, - <&clkc_audio AUD_RESET_FRDDR_B>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,sm1-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>, - <&clkc_audio AUD_RESET_FRDDR_C>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - arb: reset-controller@280 { - status = "disabled"; - compatible = "amlogic,meson-sm1-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - resets = <&clkc_audio AUD_RESET_TDMIN_A>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - resets = <&clkc_audio AUD_RESET_TDMIN_B>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - resets = <&clkc_audio AUD_RESET_TDMIN_C>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,sm1-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - resets = <&clkc_audio AUD_RESET_TDMIN_LB>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", - "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - resets = <&clkc_audio AUD_RESET_SPDIFIN>; - status = "disabled"; - }; - - spdifout_a: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT_A"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - resets = <&clkc_audio AUD_RESET_SPDIFOUT>; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,sm1-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - resets = <&clkc_audio AUD_RESET_TDMOUT_A>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,sm1-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - resets = <&clkc_audio AUD_RESET_TDMOUT_B>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,sm1-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - resets = <&clkc_audio AUD_RESET_TDMOUT_C>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - toacodec: audio-controller@740 { - compatible = "amlogic,sm1-toacodec", - "amlogic,g12a-toacodec"; - reg = <0x0 0x740 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOACODEC"; - resets = <&clkc_audio AUD_RESET_TOACODEC>; - status = "disabled"; - }; - - tohdmitx: audio-controller@744 { - compatible = "amlogic,sm1-tohdmitx", - "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOHDMITX"; - resets = <&clkc_audio AUD_RESET_TOHDMITX>; - status = "disabled"; - }; - - toddr_d: audio-controller@840 { - compatible = "amlogic,sm1-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x840 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_D"; - interrupts = <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_D>; - resets = <&arb AXG_ARB_TODDR_D>, - <&clkc_audio AUD_RESET_TODDR_D>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_d: audio-controller@880 { - compatible = "amlogic,sm1-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x880 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_D"; - interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_D>; - resets = <&arb AXG_ARB_FRDDR_D>, - <&clkc_audio AUD_RESET_FRDDR_D>; - reset-names = "arb", "rst"; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - }; - - pdm: audio-controller@61000 { - compatible = "amlogic,sm1-pdm", - "amlogic,axg-pdm"; - reg = <0x0 0x61000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - resets = <&clkc_audio AUD_RESET_PDM>; - status = "disabled"; - }; -}; - -&cecb_AO { - compatible = "amlogic,meson-sm1-ao-cec"; -}; - -&clk_msr { - compatible = "amlogic,meson-sm1-clk-measure"; -}; - - -&clkc { - compatible = "amlogic,sm1-clkc"; -}; - -&cpu_thermal { - cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -ðmac { - power-domains = <&pwrc PWRC_SM1_ETH_ID>; -}; - -&gpio_intc { - compatible = "amlogic,meson-sm1-gpio-intc", - "amlogic,meson-gpio-intc"; -}; - -&pcie { - power-domains = <&pwrc PWRC_SM1_PCIE_ID>; -}; - -&pmu { - compatible = "amlogic,sm1-ddr-pmu"; -}; - -&pwrc { - compatible = "amlogic,meson-sm1-pwrc"; -}; - -&simplefb_cvbs { - power-domains = <&pwrc PWRC_SM1_VPU_ID>; -}; - -&simplefb_hdmi { - power-domains = <&pwrc PWRC_SM1_VPU_ID>; -}; - -&vdec { - compatible = "amlogic,sm1-vdec"; -}; - -&vpu { - power-domains = <&pwrc PWRC_SM1_VPU_ID>; -}; - -&usb { - power-domains = <&pwrc PWRC_SM1_USB_ID>; -}; diff --git a/arch/arm/dts/sdm845-db845c-u-boot.dtsi b/arch/arm/dts/sdm845-db845c-u-boot.dtsi new file mode 100644 index 00000000000..906f9faa545 --- /dev/null +++ b/arch/arm/dts/sdm845-db845c-u-boot.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* Needed for Linux to boot from USB, otherwise if PCIe driver is not in initramfs + * the VBUS supply will never get turned on. + * https://lore.kernel.org/linux-arm-msm/20240320122515.3243711-1-caleb.connolly@linaro.org/ + */ +&pcie0_3p3v_dual { + regulator-always-on; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index c2fff84a686..031d4e5ecd3 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -6,10 +6,12 @@ config FEROCEON_88FR131 config KW88F6192 bool select ARCH_VERY_EARLY_INIT + imply OF_UPSTREAM config KW88F6281 bool select ARCH_VERY_EARLY_INIT + imply OF_UPSTREAM config SHEEVA_88SV131 bool diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 95e7b019ce8..7570f48e25f 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -32,24 +32,28 @@ config MESON_GXBB config MESON_GXL bool "GXL" select MESON_GX + imply OF_UPSTREAM help Select this if your SoC is an S905X/D or S805X config MESON_GXM bool "GXM" select MESON_GX + imply OF_UPSTREAM help Select this if your SoC is an S912 config MESON_AXG bool "AXG" select MESON64_COMMON + imply OF_UPSTREAM help Select this if your SoC is an A113X/D config MESON_G12A bool "G12A" select MESON64_COMMON + imply OF_UPSTREAM help Select this if your SoC is an S905X/D2 diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 2058c95ca2d..f15d3cc5edb 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -18,6 +18,8 @@ config ARMADA_32BIT select TOOLS_KWBIMAGE if SPL select SPL_SYS_NO_VECTOR_TABLE if SPL select ARCH_VERY_EARLY_INIT + select ARMADA_32BIT_SYSCON_RESET if DM_RESET && PCI_MVEBU + select ARMADA_32BIT_SYSCON_SYSRESET if SYSRESET # ARMv7 SoCs... config ARMADA_375 @@ -456,6 +458,29 @@ config SF_DEFAULT_MODE default 0x0 depends on MVEBU_SPL_BOOT_DEVICE_SPI +config ARMADA_32BIT_SYSCON + bool + depends on ARMADA_32BIT + select REGMAP + select SYSCON + +config ARMADA_32BIT_SYSCON_RESET + bool "Support Armada XP/375/38x/39x reset controller" + depends on ARMADA_32BIT + depends on DM_RESET + select ARMADA_32BIT_SYSCON + help + Build support for Armada XP/375/38x/39x reset controller. This is + needed for PCIe support. + +config ARMADA_32BIT_SYSCON_SYSRESET + bool "Support Armada XP/375/38x/39x sysreset via driver model" + depends on ARMADA_32BIT + depends on SYSRESET + select ARMADA_32BIT_SYSCON + help + Build support for Armada XP/375/38x/39x system reset via driver model. + source "board/solidrun/clearfog/Kconfig" source "board/kobol/helios4/Kconfig" diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 0584ed2be5b..329c2e49153 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -22,13 +22,14 @@ else # CONFIG_ARCH_KIRKWOOD obj-y = cpu.o obj-y += dram.o obj-y += lowlevel.o -obj-$(CONFIG_DM_RESET) += system-controller.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_ARMADA_MSYS) += ../../../drivers/ddr/marvell/axp/xor.o +obj-$(CONFIG_ARMADA_32BIT_SYSCON) += system-controller.o + ifdef CONFIG_ARMADA_38X obj-$(CONFIG_MVEBU_EFUSE) += efuse.o endif diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 8e0de935385..7c62a5dbb6a 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -52,6 +52,7 @@ void lowlevel_init(void) */ } +#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET) void reset_cpu(void) { struct mvebu_system_registers *reg = @@ -62,6 +63,7 @@ void reset_cpu(void) while (1) ; } +#endif u32 get_boot_device(void) { diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index 7cdde11cbd2..682431ee11d 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -1,18 +1,33 @@ // SPDX-License-Identifier: GPL-2.0+ -// (C) 2021 Pali Rohár <pali@kernel.org> +/* + * Copyright (C) 2021 Pali Rohár <pali@kernel.org> + * Copyright (C) 2024 Marek Behún <kabel@kernel.org> + */ #include <common.h> #include <dm.h> +#include <dm/lists.h> +#include <regmap.h> #include <reset-uclass.h> +#include <syscon.h> +#include <sysreset.h> #include <asm/io.h> -#define MVEBU_SOC_CONTROL_1_REG 0x4 +#define MVEBU_SOC_CONTROL_1_REG 0x4 -#define MVEBU_PCIE_ID 0 +#if defined(CONFIG_ARMADA_375) +# define MVEBU_RSTOUTN_MASK_REG 0x54 +# define MVEBU_SYS_SOFT_RST_REG 0x58 +#else +# define MVEBU_RSTOUTN_MASK_REG 0x60 +# define MVEBU_SYS_SOFT_RST_REG 0x64 +#endif -struct mvebu_reset_data { - void *base; -}; +#define MVEBU_GLOBAL_SOFT_RST_BIT BIT(0) + +#define MVEBU_PCIE_ID 0 + +#if IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_RESET) static int mvebu_reset_of_xlate(struct reset_ctl *rst, struct ofnode_phandle_args *args) @@ -46,46 +61,33 @@ static int mvebu_reset_free(struct reset_ctl *rst) static int mvebu_reset_assert(struct reset_ctl *rst) { - struct mvebu_reset_data *data = dev_get_priv(rst->dev); + struct regmap *regmap = syscon_get_regmap(rst->dev->parent); - clrbits_32(data->base + MVEBU_SOC_CONTROL_1_REG, BIT(rst->data)); - return 0; + return regmap_update_bits(regmap, MVEBU_SOC_CONTROL_1_REG, + BIT(rst->data), 0); } static int mvebu_reset_deassert(struct reset_ctl *rst) { - struct mvebu_reset_data *data = dev_get_priv(rst->dev); + struct regmap *regmap = syscon_get_regmap(rst->dev->parent); - setbits_32(data->base + MVEBU_SOC_CONTROL_1_REG, BIT(rst->data)); - return 0; + return regmap_update_bits(regmap, MVEBU_SOC_CONTROL_1_REG, + BIT(rst->data), BIT(rst->data)); } static int mvebu_reset_status(struct reset_ctl *rst) { - struct mvebu_reset_data *data = dev_get_priv(rst->dev); - - return !(readl(data->base + MVEBU_SOC_CONTROL_1_REG) & BIT(rst->data)); -} - -static int mvebu_reset_of_to_plat(struct udevice *dev) -{ - struct mvebu_reset_data *data = dev_get_priv(dev); + struct regmap *regmap = syscon_get_regmap(rst->dev->parent); + uint val; + int ret; - data->base = dev_read_addr_ptr(dev); - if (!data->base) - return -EINVAL; + ret = regmap_read(regmap, MVEBU_SOC_CONTROL_1_REG, &val); + if (ret < 0) + return ret; - return 0; + return !(val & BIT(rst->data)); } -static const struct udevice_id mvebu_reset_of_match[] = { - { .compatible = "marvell,armada-370-xp-system-controller" }, - { .compatible = "marvell,armada-375-system-controller" }, - { .compatible = "marvell,armada-380-system-controller" }, - { .compatible = "marvell,armada-390-system-controller" }, - { }, -}; - static const struct reset_ops mvebu_reset_ops = { .of_xlate = mvebu_reset_of_xlate, .request = mvebu_reset_request, @@ -98,8 +100,81 @@ static const struct reset_ops mvebu_reset_ops = { U_BOOT_DRIVER(mvebu_reset) = { .name = "mvebu-reset", .id = UCLASS_RESET, - .of_match = mvebu_reset_of_match, - .of_to_plat = mvebu_reset_of_to_plat, - .priv_auto = sizeof(struct mvebu_reset_data), .ops = &mvebu_reset_ops, }; + +#endif /* IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_RESET) */ + +#if IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET) + +static int mvebu_sysreset_request(struct udevice *dev, enum sysreset_t type) +{ + struct regmap *regmap = syscon_get_regmap(dev->parent); + uint bit; + + if (type != SYSRESET_COLD) + return -EPROTONOSUPPORT; + + bit = MVEBU_GLOBAL_SOFT_RST_BIT; + + regmap_update_bits(regmap, MVEBU_RSTOUTN_MASK_REG, bit, bit); + regmap_update_bits(regmap, MVEBU_SYS_SOFT_RST_REG, bit, bit); + + /* Loop while waiting for the reset */ + while (1) + ; + + return 0; +} + +static struct sysreset_ops mvebu_sysreset_ops = { + .request = mvebu_sysreset_request, +}; + +U_BOOT_DRIVER(mvebu_sysreset) = { + .name = "mvebu-sysreset", + .id = UCLASS_SYSRESET, + .ops = &mvebu_sysreset_ops, +}; + +#endif /* IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET) */ + +static int mvebu_syscon_bind(struct udevice *dev) +{ + int ret = 0; + + /* bind also mvebu-reset, with the same ofnode */ + if (IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_RESET)) { + ret = device_bind_driver_to_node(dev, "mvebu-reset", + "mvebu-reset", dev_ofnode(dev), + NULL); + if (ret < 0) + return ret; + } + + /* bind also mvebu-sysreset, with the same ofnode */ + if (IS_ENABLED(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET)) { + ret = device_bind_driver_to_node(dev, "mvebu-sysreset", + "mvebu-sysreset", + dev_ofnode(dev), NULL); + if (ret < 0) + return ret; + } + + return ret; +} + +static const struct udevice_id mvebu_syscon_of_match[] = { + { .compatible = "marvell,armada-370-xp-system-controller" }, + { .compatible = "marvell,armada-375-system-controller" }, + { .compatible = "marvell,armada-380-system-controller" }, + { .compatible = "marvell,armada-390-system-controller" }, + { }, +}; + +U_BOOT_DRIVER(mvebu_syscon) = { + .name = "mvebu-system-controller", + .id = UCLASS_SYSCON, + .of_match = mvebu_syscon_of_match, + .bind = mvebu_syscon_bind, +}; diff --git a/arch/arm/mach-snapdragon/Makefile b/arch/arm/mach-snapdragon/Makefile index 857171e593d..7a4495c8108 100644 --- a/arch/arm/mach-snapdragon/Makefile +++ b/arch/arm/mach-snapdragon/Makefile @@ -3,3 +3,4 @@ # (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com> obj-y += board.o +obj-$(CONFIG_OF_LIVE) += of_fixup.o diff --git a/arch/arm/mach-snapdragon/board.c b/arch/arm/mach-snapdragon/board.c index f12f5791a13..3d5994c8788 100644 --- a/arch/arm/mach-snapdragon/board.c +++ b/arch/arm/mach-snapdragon/board.c @@ -16,6 +16,7 @@ #include <dm/pinctrl.h> #include <dm/uclass-internal.h> #include <dm/read.h> +#include <power/regulator.h> #include <env.h> #include <init.h> #include <linux/arm-smccc.h> @@ -24,9 +25,12 @@ #include <linux/sizes.h> #include <lmb.h> #include <malloc.h> +#include <fdt_support.h> #include <usb.h> #include <sort.h> +#include "qcom-priv.h" + DECLARE_GLOBAL_DATA_PTR; static struct mm_region rbx_mem_map[CONFIG_NR_DRAM_BANKS + 2] = { { 0 } }; @@ -93,7 +97,9 @@ void *board_fdt_blob_setup(int *err) * try and use the FDT built into U-Boot if there is one... * This avoids having a hard dependency on the previous stage bootloader */ - if (IS_ENABLED(CONFIG_OF_SEPARATE) && (!fdt || fdt != ALIGN(fdt, SZ_4K))) { + + if (IS_ENABLED(CONFIG_OF_SEPARATE) && (!fdt || fdt != ALIGN(fdt, SZ_4K) || + fdt_check_header((void *)fdt))) { debug("%s: Using built in FDT, bootloader gave us %#llx\n", __func__, fdt); return (void *)gd->fdt_blob; } @@ -156,7 +162,9 @@ void __weak qcom_board_init(void) int board_init(void) { + regulators_enable_boot_on(false); show_psci_version(); + qcom_of_fixup_nodes(); qcom_board_init(); return 0; } diff --git a/arch/arm/mach-snapdragon/of_fixup.c b/arch/arm/mach-snapdragon/of_fixup.c new file mode 100644 index 00000000000..3f7ac227bd0 --- /dev/null +++ b/arch/arm/mach-snapdragon/of_fixup.c @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * OF_LIVE devicetree fixup. + * + * This file implements runtime fixups for Qualcomm DT to improve + * compatibility with U-Boot. This includes adjusting the USB nodes + * to only use USB high-speed, as well as remapping volume buttons + * to behave as up/down for navigating U-Boot. + * + * We use OF_LIVE for this rather than early FDT fixup for a couple + * of reasons: it has a much nicer API, is most likely more efficient, + * and our changes are only applied to U-Boot. This allows us to use a + * DT designed for Linux, run U-Boot with a modified version, and then + * boot Linux with the original FDT. + * + * Copyright (c) 2024 Linaro Ltd. + * Author: Caleb Connolly <caleb.connolly@linaro.org> + */ + +#include <dt-bindings/input/linux-event-codes.h> +#include <dm/of_access.h> +#include <dm/of.h> +#include <fdt_support.h> +#include <linux/errno.h> +#include <stdlib.h> +#include <time.h> + +/* U-Boot only supports USB high-speed mode on Qualcomm platforms with DWC3 + * USB controllers. Rather than requiring source level DT changes, we fix up + * DT here. This improves compatibility with upstream DT and simplifies the + * porting process for new devices. + */ +static int fixup_qcom_dwc3(struct device_node *glue_np) +{ + struct device_node *dwc3; + int ret, len, hsphy_idx = 1; + const __be32 *phandles; + const char *second_phy_name; + + debug("Fixing up %s\n", glue_np->name); + + /* Tell the glue driver to configure the wrapper for high-speed only operation */ + ret = of_write_prop(glue_np, "qcom,select-utmi-as-pipe-clk", 0, NULL); + if (ret) { + log_err("Failed to add property 'qcom,select-utmi-as-pipe-clk': %d\n", ret); + return ret; + } + + /* Find the DWC3 node itself */ + dwc3 = of_find_compatible_node(glue_np, NULL, "snps,dwc3"); + if (!dwc3) { + log_err("Failed to find dwc3 node\n"); + return -ENOENT; + } + + phandles = of_get_property(dwc3, "phys", &len); + len /= sizeof(*phandles); + if (len == 1) { + log_debug("Only one phy, not a superspeed controller\n"); + return 0; + } + + /* Figure out if the superspeed phy is present and if so then which phy is it? */ + ret = of_property_read_string_index(dwc3, "phy-names", 1, &second_phy_name); + if (ret == -ENODATA) { + log_debug("Only one phy, not a super-speed controller\n"); + return 0; + } else if (ret) { + log_err("Failed to read second phy name: %d\n", ret); + return ret; + } + + if (!strncmp("usb3-phy", second_phy_name, strlen("usb3-phy"))) { + log_debug("Second phy isn't superspeed (is '%s') assuming first phy is SS\n", + second_phy_name); + hsphy_idx = 0; + } + + /* Overwrite the "phys" property to only contain the high-speed phy */ + ret = of_write_prop(dwc3, "phys", sizeof(*phandles), phandles + hsphy_idx); + if (ret) { + log_err("Failed to overwrite 'phys' property: %d\n", ret); + return ret; + } + + /* Overwrite "phy-names" to only contain a single entry */ + ret = of_write_prop(dwc3, "phy-names", strlen("usb2-phy"), "usb2-phy"); + if (ret) { + log_err("Failed to overwrite 'phy-names' property: %d\n", ret); + return ret; + } + + ret = of_write_prop(dwc3, "maximum-speed", strlen("high-speed"), "high-speed"); + if (ret) { + log_err("Failed to set 'maximum-speed' property: %d\n", ret); + return ret; + } + + return 0; +} + +static void fixup_usb_nodes(void) +{ + struct device_node *glue_np = NULL; + int ret; + + while ((glue_np = of_find_compatible_node(glue_np, NULL, "qcom,dwc3"))) { + ret = fixup_qcom_dwc3(glue_np); + if (ret) + log_warning("Failed to fixup node %s: %d\n", glue_np->name, ret); + } +} + +/* Remove all references to the rpmhpd device */ +static void fixup_power_domains(void) +{ + struct device_node *pd = NULL, *np = NULL; + struct property *prop; + const __be32 *val; + + /* All Qualcomm platforms name the rpm(h)pd "power-controller" */ + for_each_of_allnodes(pd) { + if (pd->name && !strcmp("power-controller", pd->name)) + break; + } + + /* Sanity check that this is indeed a power domain controller */ + if (!of_find_property(pd, "#power-domain-cells", NULL)) { + log_err("Found power-controller but it doesn't have #power-domain-cells\n"); + return; + } + + /* Remove all references to the power domain controller */ + for_each_of_allnodes(np) { + if (!(prop = of_find_property(np, "power-domains", NULL))) + continue; + + val = prop->value; + if (val[0] == cpu_to_fdt32(pd->phandle)) + of_remove_property(np, prop); + } +} + +#define time_call(func, ...) \ + do { \ + u64 start = timer_get_us(); \ + func(__VA_ARGS__); \ + debug(#func " took %lluus\n", timer_get_us() - start); \ + } while (0) + +void qcom_of_fixup_nodes(void) +{ + time_call(fixup_usb_nodes); + time_call(fixup_power_domains); +} diff --git a/arch/arm/mach-snapdragon/qcom-priv.h b/arch/arm/mach-snapdragon/qcom-priv.h new file mode 100644 index 00000000000..0a7ed5eff8b --- /dev/null +++ b/arch/arm/mach-snapdragon/qcom-priv.h @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 + +#ifndef __QCOM_PRIV_H__ +#define __QCOM_PRIV_H__ + +#if CONFIG_IS_ENABLED(OF_LIVE) +/** + * qcom_of_fixup_nodes() - Fixup Qualcomm DT nodes + * + * Adjusts nodes in the live tree to improve compatibility with U-Boot. + */ +void qcom_of_fixup_nodes(void); +#else +static inline void qcom_of_fixup_nodes(void) +{ + log_debug("Unable to dynamically fixup USB nodes, please enable CONFIG_OF_LIVE\n"); +} +#endif /* OF_LIVE */ + +#endif /* __QCOM_PRIV_H__ */ diff --git a/board/CZ.NIC/turris_atsha_otp.c b/board/CZ.NIC/turris_atsha_otp.c index a29fe362317..85eebcdf18e 100644 --- a/board/CZ.NIC/turris_atsha_otp.c +++ b/board/CZ.NIC/turris_atsha_otp.c @@ -11,6 +11,7 @@ #include <atsha204a-i2c.h> #include "turris_atsha_otp.h" +#include "turris_common.h" #define TURRIS_ATSHA_OTP_VERSION 0 #define TURRIS_ATSHA_OTP_SERIAL 1 @@ -32,26 +33,6 @@ static struct udevice *get_atsha204a_dev(void) return dev; } -static void increment_mac(u8 *mac) -{ - int i; - - for (i = 5; i >= 3; i--) { - mac[i] += 1; - if (mac[i]) - break; - } -} - -static void set_mac_if_invalid(int i, u8 *mac) -{ - u8 oldmac[6]; - - if (is_valid_ethaddr(mac) && - !eth_env_get_enetaddr_by_index("eth", i, oldmac)) - eth_env_set_enetaddr_by_index("eth", i, mac); -} - int turris_atsha_otp_init_mac_addresses(int first_idx) { struct udevice *dev = get_atsha204a_dev(); @@ -84,11 +65,7 @@ int turris_atsha_otp_init_mac_addresses(int first_idx) mac[4] = mac1[2]; mac[5] = mac1[3]; - set_mac_if_invalid((first_idx + 0) % 3, mac); - increment_mac(mac); - set_mac_if_invalid((first_idx + 1) % 3, mac); - increment_mac(mac); - set_mac_if_invalid((first_idx + 2) % 3, mac); + turris_init_mac_addresses(first_idx, mac); return 0; } diff --git a/board/CZ.NIC/turris_common.c b/board/CZ.NIC/turris_common.c new file mode 100644 index 00000000000..1717dda82eb --- /dev/null +++ b/board/CZ.NIC/turris_common.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 Marek Behún <kabel@kernel.org> + */ + +#include <env.h> +#include <net.h> + +#include "turris_common.h" + +static void increment_mac(u8 *mac) +{ + int i; + + for (i = 5; i >= 3; i--) { + mac[i] += 1; + if (mac[i]) + break; + } +} + +static void set_mac_if_invalid(int i, u8 *mac) +{ + u8 oldmac[6]; + + if (is_valid_ethaddr(mac) && + !eth_env_get_enetaddr_by_index("eth", i, oldmac)) + eth_env_set_enetaddr_by_index("eth", i, mac); +} + +void turris_init_mac_addresses(int first_idx, const u8 *first_mac) +{ + u8 mac[6]; + + memcpy(mac, first_mac, sizeof(mac)); + + set_mac_if_invalid((first_idx + 0) % 3, mac); + increment_mac(mac); + set_mac_if_invalid((first_idx + 1) % 3, mac); + increment_mac(mac); + set_mac_if_invalid((first_idx + 2) % 3, mac); +} diff --git a/board/CZ.NIC/turris_common.h b/board/CZ.NIC/turris_common.h new file mode 100644 index 00000000000..5565ea9fd2a --- /dev/null +++ b/board/CZ.NIC/turris_common.h @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#ifndef TURRIS_COMMON_H +#define TURRIS_COMMON_H + +#include <asm/types.h> + +void turris_init_mac_addresses(int first_idx, const u8 *first_mac); + +#endif diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c index 3489bdd74bd..1a2f60e3d19 100644 --- a/board/CZ.NIC/turris_mox/turris_mox.c +++ b/board/CZ.NIC/turris_mox/turris_mox.c @@ -565,13 +565,10 @@ static void handle_reset_button(void) int checkboard(void) { int i, ret, board_version, ram_size, is_sd; - const char *pub_key, *model; + const char *pub_key; const u8 *topology; u64 serial_number; - model = fdt_getprop(gd->fdt_blob, 0, "model", NULL); - printf("Model: %s\n", model); - ret = mbox_sp_get_board_info(&serial_number, NULL, NULL, &board_version, &ram_size, NULL); if (ret < 0) { diff --git a/board/CZ.NIC/turris_omnia/Makefile b/board/CZ.NIC/turris_omnia/Makefile index dc39b44ae19..341378b4e54 100644 --- a/board/CZ.NIC/turris_omnia/Makefile +++ b/board/CZ.NIC/turris_omnia/Makefile @@ -2,4 +2,4 @@ # # Copyright (C) 2017 Marek Behún <kabel@kernel.org> -obj-y := turris_omnia.o ../turris_atsha_otp.o +obj-y := turris_omnia.o ../turris_atsha_otp.o ../turris_common.o diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c index adeb69a205b..3b7a71bdad2 100644 --- a/board/CZ.NIC/turris_omnia/turris_omnia.c +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c @@ -18,18 +18,22 @@ #include <asm/io.h> #include <asm/arch/cpu.h> #include <asm/arch/soc.h> +#include <asm/unaligned.h> #include <dm/uclass.h> #include <dt-bindings/gpio/gpio.h> #include <fdt_support.h> #include <hexdump.h> #include <time.h> +#include <turris-omnia-mcu-interface.h> #include <linux/bitops.h> +#include <linux/bitrev.h> #include <linux/delay.h> #include <u-boot/crc.h> #include "../drivers/ddr/marvell/a38x/ddr3_init.h" #include <../serdes/a38x/high_speed_env_spec.h> #include "../turris_atsha_otp.h" +#include "../turris_common.h" DECLARE_GLOBAL_DATA_PTR; @@ -59,46 +63,6 @@ DECLARE_GLOBAL_DATA_PTR; #define A385_WD_RSTOUT_UNMASK MVEBU_REGISTER(0x20704) #define A385_WD_RSTOUT_UNMASK_GLOBAL BIT(8) -enum mcu_commands { - CMD_GET_STATUS_WORD = 0x01, - CMD_GET_RESET = 0x09, - CMD_GET_FW_VERSION_APP = 0x0a, - CMD_WATCHDOG_STATE = 0x0b, - CMD_GET_FW_VERSION_BOOT = 0x0e, - - /* available if STS_FEATURES_SUPPORTED bit set in status word */ - CMD_GET_FEATURES = 0x10, - - /* available if EXT_CMD bit set in features */ - CMD_EXT_CONTROL = 0x12, -}; - -enum status_word_bits { - STS_MCU_TYPE_MASK = GENMASK(1, 0), - STS_MCU_TYPE_STM32 = 0, - STS_MCU_TYPE_GD32 = 1, - STS_MCU_TYPE_MKL = 2, - STS_MCU_TYPE_UNKN = 3, - STS_FEATURES_SUPPORTED = BIT(2), - CARD_DET_STSBIT = 0x0010, - MSATA_IND_STSBIT = 0x0020, -}; - -/* CMD_GET_FEATURES */ -enum features_e { - FEAT_PERIPH_MCU = BIT(0), - FEAT_EXT_CMDS = BIT(1), -}; - -/* CMD_EXT_CONTROL */ -enum ext_ctl_e { - EXT_CTL_nRES_LAN = BIT(1), - EXT_CTL_nRES_PHY = BIT(2), - EXT_CTL_nPERST0 = BIT(3), - EXT_CTL_nPERST1 = BIT(4), - EXT_CTL_nPERST2 = BIT(5), -}; - /* * Those values and defines are taken from the Marvell U-Boot version * "u-boot-2013.01-2014_T3.0" @@ -172,6 +136,141 @@ static int omnia_mcu_write(u8 cmd, const void *buf, int len) return dm_i2c_write(chip, cmd, buf, len); } +static int omnia_mcu_get_sts_and_features(u16 *psts, u32 *pfeatures) +{ + u16 sts, feat16; + int ret; + + ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &sts, sizeof(sts)); + if (ret) + return ret; + + if (psts) + *psts = sts; + + if (!pfeatures) + return 0; + + if (sts & STS_FEATURES_SUPPORTED) { + /* try read 32-bit features */ + ret = omnia_mcu_read(CMD_GET_FEATURES, pfeatures, + sizeof(*pfeatures)); + if (ret) { + /* try read 16-bit features */ + ret = omnia_mcu_read(CMD_GET_FEATURES, &feat16, + sizeof(&feat16)); + if (ret) + return ret; + + *pfeatures = feat16; + } else { + if (*pfeatures & FEAT_FROM_BIT_16_INVALID) + *pfeatures &= GENMASK(15, 0); + } + } else { + *pfeatures = 0; + } + + return 0; +} + +static int omnia_mcu_get_sts(u16 *sts) +{ + return omnia_mcu_get_sts_and_features(sts, NULL); +} + +static bool omnia_mcu_has_feature(u32 feature) +{ + u32 features; + + if (omnia_mcu_get_sts_and_features(NULL, &features)) + return false; + + return feature & features; +} + +static u32 omnia_mcu_crc32(const void *p, size_t len) +{ + u32 val, crc = 0; + + compiletime_assert(!(len % 4), "length has to be a multiple of 4"); + + while (len) { + val = bitrev32(get_unaligned_le32(p)); + crc = crc32(crc, (void *)&val, 4); + p += 4; + len -= 4; + } + + return ~bitrev32(crc); +} + +/* Can only be called after relocation, since it needs cleared BSS */ +static int omnia_mcu_board_info(char *serial, u8 *mac, char *version) +{ + static u8 reply[17]; + static bool cached; + + if (!cached) { + u8 csum; + int ret; + + ret = omnia_mcu_read(CMD_BOARD_INFO_GET, reply, sizeof(reply)); + if (ret) + return ret; + + if (reply[0] != 16) + return -EBADMSG; + + csum = reply[16]; + reply[16] = 0; + + if ((omnia_mcu_crc32(&reply[1], 16) & 0xff) != csum) + return -EBADMSG; + + cached = true; + } + + if (serial) { + const char *serial_env; + + serial_env = env_get("serial#"); + if (serial_env && strlen(serial_env) == 16) { + strcpy(serial, serial_env); + } else { + sprintf(serial, "%016llX", + get_unaligned_le64(&reply[1])); + env_set("serial#", serial); + } + } + + if (mac) + memcpy(mac, &reply[9], ETH_ALEN); + + if (version) + sprintf(version, "%u", reply[15]); + + return 0; +} + +static int omnia_mcu_get_board_public_key(char pub_key[static 67]) +{ + u8 reply[34]; + int ret; + + ret = omnia_mcu_read(CMD_CRYPTO_GET_PUBLIC_KEY, reply, sizeof(reply)); + if (ret) + return ret; + + if (reply[0] != 33) + return -EBADMSG; + + bin2hex(pub_key, &reply[1], 33); + pub_key[66] = '\0'; + + return 0; +} + static void enable_a385_watchdog(unsigned int timeout_minutes) { struct sar_freq_modes sar_freq; @@ -219,7 +318,7 @@ static bool disable_mcu_watchdog(void) puts("Disabling MCU watchdog... "); - ret = omnia_mcu_write(CMD_WATCHDOG_STATE, "\x00", 1); + ret = omnia_mcu_write(CMD_SET_WATCHDOG_STATE, "\x00", 1); if (ret) { printf("omnia_mcu_write failed: %i\n", ret); return false; @@ -233,7 +332,7 @@ static bool disable_mcu_watchdog(void) static bool omnia_detect_sata(const char *msata_slot) { int ret; - u16 stsword; + u16 sts; puts("MiniPCIe/mSATA card detection... "); @@ -249,24 +348,24 @@ static bool omnia_detect_sata(const char *msata_slot) } } - ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &stsword, sizeof(stsword)); + ret = omnia_mcu_get_sts(&sts); if (ret) { printf("omnia_mcu_read failed: %i, defaulting to MiniPCIe card\n", ret); return false; } - if (!(stsword & CARD_DET_STSBIT)) { + if (!(sts & STS_CARD_DET)) { puts("none\n"); return false; } - if (stsword & MSATA_IND_STSBIT) + if (sts & STS_MSATA_IND) puts("mSATA\n"); else puts("MiniPCIe\n"); - return stsword & MSATA_IND_STSBIT ? true : false; + return sts & STS_MSATA_IND; } static bool omnia_detect_wwan_usb3(const char *wwan_slot) @@ -393,32 +492,33 @@ static int omnia_get_ram_size_gb(void) static const char * const omnia_get_mcu_type(void) { - static const char * const mcu_types[] = { - [STS_MCU_TYPE_STM32] = "STM32", - [STS_MCU_TYPE_GD32] = "GD32", - [STS_MCU_TYPE_MKL] = "MKL", - [STS_MCU_TYPE_UNKN] = "unknown", - }; - static const char * const mcu_types_with_perip_resets[] = { - [STS_MCU_TYPE_STM32] = "STM32 (with peripheral resets)", - [STS_MCU_TYPE_GD32] = "GD32 (with peripheral resets)", - [STS_MCU_TYPE_MKL] = "MKL (with peripheral resets)", - [STS_MCU_TYPE_UNKN] = "unknown (with peripheral resets)", - }; - u16 stsword, features; + static char result[] = "xxxxxxx (with peripheral resets)"; + u16 sts; int ret; - ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &stsword, sizeof(stsword)); + ret = omnia_mcu_get_sts(&sts); if (ret) return "unknown"; - if (stsword & STS_FEATURES_SUPPORTED) { - ret = omnia_mcu_read(CMD_GET_FEATURES, &features, sizeof(features)); - if (ret == 0 && (features & FEAT_PERIPH_MCU)) - return mcu_types_with_perip_resets[stsword & STS_MCU_TYPE_MASK]; + switch (sts & STS_MCU_TYPE_MASK) { + case STS_MCU_TYPE_STM32: + strcpy(result, "STM32"); + break; + case STS_MCU_TYPE_GD32: + strcpy(result, "GD32"); + break; + case STS_MCU_TYPE_MKL: + strcpy(result, "MKL"); + break; + default: + strcpy(result, "unknown"); + break; } - return mcu_types[stsword & STS_MCU_TYPE_MASK]; + if (omnia_mcu_has_feature(FEAT_PERIPH_MCU)) + strcat(result, " (with peripheral resets)"); + + return result; } static const char * const omnia_get_mcu_version(void) @@ -695,9 +795,6 @@ int board_early_init_f(void) void spl_board_init(void) { - u16 val; - int ret; - /* * If booting from UART, disable MCU watchdog in SPL, since uploading * U-Boot proper can take too much time and trigger it. Instead enable @@ -714,12 +811,8 @@ void spl_board_init(void) * resets then LAN eth switch is initialized automatically by bootstrap * pins when A385 is released from the reset. */ - ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &val, sizeof(val)); - if (ret == 0 && (val & STS_FEATURES_SUPPORTED)) { - ret = omnia_mcu_read(CMD_GET_FEATURES, &val, sizeof(val)); - if (ret == 0 && (val & FEAT_PERIPH_MCU)) - initialize_switch(); - } + if (omnia_mcu_has_feature(FEAT_PERIPH_MCU)) + initialize_switch(); } #if IS_ENABLED(CONFIG_OF_BOARD_FIXUP) || IS_ENABLED(CONFIG_OF_BOARD_SETUP) @@ -914,26 +1007,40 @@ static int fixup_mcu_gpio_in_eth_wan_node(void *blob) return 0; } +static void fixup_atsha_node(void *blob) +{ + int node; + + if (!omnia_mcu_has_feature(FEAT_CRYPTO)) + return; + + node = fdt_node_offset_by_compatible(blob, -1, "atmel,atsha204a"); + if (node < 0) { + printf("Cannot find ATSHA204A node!\n"); + return; + } + + if (fdt_status_disabled(blob, node) < 0) + printf("Cannot disable ATSHA204A node!\n"); + else + debug("Disabled ATSHA204A node\n"); +} + #endif #if IS_ENABLED(CONFIG_OF_BOARD_FIXUP) int board_fix_fdt(void *blob) { - u16 val; - int ret; - - ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &val, sizeof(val)); - if (ret == 0 && (val & STS_FEATURES_SUPPORTED)) { - ret = omnia_mcu_read(CMD_GET_FEATURES, &val, sizeof(val)); - if (ret == 0 && (val & FEAT_PERIPH_MCU)) { - fixup_mcu_gpio_in_pcie_nodes(blob); - fixup_mcu_gpio_in_eth_wan_node(blob); - } + if (omnia_mcu_has_feature(FEAT_PERIPH_MCU)) { + fixup_mcu_gpio_in_pcie_nodes(blob); + fixup_mcu_gpio_in_eth_wan_node(blob); } fixup_msata_port_nodes(blob); fixup_wwan_port_nodes(blob); + fixup_atsha_node(blob); + return 0; } #endif @@ -964,23 +1071,46 @@ int board_late_init(void) int checkboard(void) { - char serial[17]; + char serial[17], version[4], pub_key[67]; + bool has_version; int err; - err = turris_atsha_otp_get_serial_number(serial); - printf("Model: Turris Omnia\n"); printf(" MCU type: %s\n", omnia_get_mcu_type()); printf(" MCU version: %s\n", omnia_get_mcu_version()); printf(" RAM size: %i MiB\n", omnia_get_ram_size_gb() * 1024); + + if (omnia_mcu_has_feature(FEAT_BOARD_INFO)) { + err = omnia_mcu_board_info(serial, NULL, version); + has_version = !err; + } else { + err = turris_atsha_otp_get_serial_number(serial); + has_version = false; + } + + printf(" Board version: %s\n", has_version ? version : "unknown"); printf(" Serial Number: %s\n", !err ? serial : "unknown"); + if (omnia_mcu_has_feature(FEAT_CRYPTO)) { + err = omnia_mcu_get_board_public_key(pub_key); + printf(" ECDSA Public Key: %s\n", !err ? pub_key : "unknown"); + } + return 0; } int misc_init_r(void) { - turris_atsha_otp_init_mac_addresses(1); - turris_atsha_otp_init_serial_number(); + if (omnia_mcu_has_feature(FEAT_BOARD_INFO)) { + char serial[17]; + u8 first_mac[6]; + + if (!omnia_mcu_board_info(serial, first_mac, NULL)) + turris_init_mac_addresses(1, first_mac); + } else { + turris_atsha_otp_init_mac_addresses(1); + turris_atsha_otp_init_serial_number(); + } + return 0; } @@ -1102,6 +1232,8 @@ int ft_board_setup(void *blob, struct bd_info *bd) fixup_msata_port_nodes(blob); fixup_wwan_port_nodes(blob); + fixup_atsha_node(blob); + return 0; } #endif diff --git a/board/amlogic/jethub-j100/MAINTAINERS b/board/amlogic/jethub-j100/MAINTAINERS index 43f6a5fc86b..3edc5d8865c 100644 --- a/board/amlogic/jethub-j100/MAINTAINERS +++ b/board/amlogic/jethub-j100/MAINTAINERS @@ -1,5 +1,5 @@ JetHome JetHub -M: Vyacheslav Bocharov <adeep@lexina.in> +M: Viacheslav Bocharov <adeep@lexina.in> S: Maintained L: u-boot-amlogic@groups.io F: board/amlogic/jethub-j100/ diff --git a/cmd/rng.c b/cmd/rng.c index b073a6c8492..e5ab8681122 100644 --- a/cmd/rng.c +++ b/cmd/rng.c @@ -17,7 +17,7 @@ static int do_rng(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) u8 buf[64]; int devnum; struct udevice *dev; - int ret = CMD_RET_SUCCESS; + int ret = CMD_RET_SUCCESS, err; if (argc == 2 && !strcmp(argv[1], "list")) { int idx = 0; @@ -62,8 +62,9 @@ static int do_rng(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) n = min(n, sizeof(buf)); - if (dm_rng_read(dev, buf, n)) { - printf("Reading RNG failed\n"); + err = dm_rng_read(dev, buf, n); + if (err) { + puts(err == -EINTR ? "Abort\n" : "Reading RNG failed\n"); ret = CMD_RET_FAILURE; } else { print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, n); diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig index cc17a8b1140..977daf9f090 100644 --- a/configs/SBx81LIFKW_defconfig +++ b/configs/SBx81LIFKW_defconfig @@ -6,6 +6,7 @@ CONFIG_ARCH_KIRKWOOD=y CONFIG_SYS_KWD_CONFIG="board/alliedtelesis/SBx81LIFKW/kwbimage.cfg" CONFIG_TEXT_BASE=0x00600000 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 +# CONFIG_OF_UPSTREAM is not set CONFIG_TARGET_SBx81LIFKW=y CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xC0000 diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig index 0612723298e..9bc86140302 100644 --- a/configs/SBx81LIFXCAT_defconfig +++ b/configs/SBx81LIFXCAT_defconfig @@ -6,6 +6,7 @@ CONFIG_ARCH_KIRKWOOD=y CONFIG_SYS_KWD_CONFIG="board/alliedtelesis/SBx81LIFXCAT/kwbimage.cfg" CONFIG_TEXT_BASE=0x00600000 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 +# CONFIG_OF_UPSTREAM is not set CONFIG_TARGET_SBx81LIFXCAT=y CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xC0000 diff --git a/configs/bananapi-cm4-cm4io_defconfig b/configs/bananapi-cm4-cm4io_defconfig index 116147fc9af..cb78dabc13a 100644 --- a/configs/bananapi-cm4-cm4io_defconfig +++ b/configs/bananapi-cm4-cm4io_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-bananapi-cm4-cm4io" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-bananapi-cm4-cm4io" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/bananapi-m2-pro_defconfig b/configs/bananapi-m2-pro_defconfig index 755bccb4a72..196bc4077d6 100644 --- a/configs/bananapi-m2-pro_defconfig +++ b/configs/bananapi-m2-pro_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-bananapi-m2-pro" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-bananapi-m2-pro" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/bananapi-m2s_defconfig b/configs/bananapi-m2s_defconfig index af8daced622..7b137d5e1c4 100644 --- a/configs/bananapi-m2s_defconfig +++ b/configs/bananapi-m2s_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-a311d-bananapi-m2s" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-a311d-bananapi-m2s" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/bananapi-m5_defconfig b/configs/bananapi-m5_defconfig index 6de5d5fe7bb..99ed7c9669a 100644 --- a/configs/bananapi-m5_defconfig +++ b/configs/bananapi-m5_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-bananapi-m5" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-bananapi-m5" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/beelink-gsking-x_defconfig b/configs/beelink-gsking-x_defconfig index 99e36e970a1..c1e60ede4a0 100644 --- a/configs/beelink-gsking-x_defconfig +++ b/configs/beelink-gsking-x_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gsking-x" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-gsking-x" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/beelink-gt1-ultimate_defconfig b/configs/beelink-gt1-ultimate_defconfig index 00fdad8544b..0e30e13c823 100644 --- a/configs/beelink-gt1-ultimate_defconfig +++ b/configs/beelink-gt1-ultimate_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxm-gt1-ultimate" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxm-gt1-ultimate" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXM=y diff --git a/configs/beelink-gtking_defconfig b/configs/beelink-gtking_defconfig index 5c21d8eeabe..0b644f0e349 100644 --- a/configs/beelink-gtking_defconfig +++ b/configs/beelink-gtking_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gtking" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-gtking" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/beelink-gtkingpro_defconfig b/configs/beelink-gtkingpro_defconfig index 37bb4cde792..a694617a968 100644 --- a/configs/beelink-gtkingpro_defconfig +++ b/configs/beelink-gtkingpro_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gtking-pro" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-gtking-pro" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig index bb1bcb0aa30..69658a2ba7f 100644 --- a/configs/d2net_v2_defconfig +++ b/configs/d2net_v2_defconfig @@ -11,7 +11,7 @@ CONFIG_TARGET_NET2BIG_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-d2net" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-d2net" CONFIG_IDENT_STRING=" D2 v2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index edfe92c5f38..b85f7cac8ef 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -10,7 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_TARGET_DNS325=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xE0000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dns325" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-dns325" CONFIG_IDENT_STRING="\nD-Link DNS-325" CONFIG_SYS_LOAD_ADDR=0x800000 # CONFIG_SYS_MALLOC_F is not set diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig index 719fa3979e8..7b5f19433a9 100644 --- a/configs/dockstar_defconfig +++ b/configs/dockstar_defconfig @@ -13,7 +13,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_DOCKSTAR=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x80000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dockstar" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-dockstar" CONFIG_IDENT_STRING="\nSeagate FreeAgent DockStar" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index 02a2635af86..8518eabcb2b 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -13,7 +13,7 @@ CONFIG_TARGET_DREAMPLUG=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x100000 CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dreamplug" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-dreamplug" CONFIG_IDENT_STRING="\nMarvell-DreamPlug" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x100000 diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig index 304c098c996..ef805eca562 100644 --- a/configs/ds109_defconfig +++ b/configs/ds109_defconfig @@ -14,7 +14,7 @@ CONFIG_TARGET_DS109=y CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x3D0000 CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ds109" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ds109" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x3D0000 # CONFIG_SYS_MALLOC_F is not set diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index d577d5807bd..53b2ce97e88 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -13,7 +13,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_GOFLEXHOME=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xC0000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-goflexnet" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-goflexnet" CONFIG_IDENT_STRING="\nSeagate GoFlex Home" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index 7cb649e29c5..5371ee403b3 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -10,7 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_TARGET_GURUPLUG=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xE0000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-guruplug-server-plus" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-guruplug-server-plus" CONFIG_IDENT_STRING="\nMarvell-GuruPlug" CONFIG_SYS_LOAD_ADDR=0x800000 # CONFIG_SYS_MALLOC_F is not set diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index 074384e3872..32b0e1c3958 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -10,7 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_TARGET_IB62X0=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xE0000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ib62x0" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ib62x0" CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0" CONFIG_SYS_LOAD_ADDR=0x800000 # CONFIG_SYS_MALLOC_F is not set diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig index f7b74c4662e..45ffbd92dba 100644 --- a/configs/iconnect_defconfig +++ b/configs/iconnect_defconfig @@ -13,7 +13,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_ICONNECT=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x80000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-iconnect" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-iconnect" CONFIG_IDENT_STRING=" Iomega iConnect" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_PCI=y diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig index 2e8e3f3928c..3fa7790d77b 100644 --- a/configs/inetspace_v2_defconfig +++ b/configs/inetspace_v2_defconfig @@ -11,7 +11,7 @@ CONFIG_TARGET_NETSPACE_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-is2" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-is2" CONFIG_IDENT_STRING=" IS v2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 diff --git a/configs/jethub_j100_defconfig b/configs/jethub_j100_defconfig index 863245430a9..9de6b4b44d9 100644 --- a/configs/jethub_j100_defconfig +++ b/configs/jethub_j100_defconfig @@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-axg-jethome-jethub-j100" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-axg-jethome-jethub-j100" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_AXG=y diff --git a/configs/jethub_j80_defconfig b/configs/jethub_j80_defconfig index ca0808f7121..85306872f9a 100644 --- a/configs/jethub_j80_defconfig +++ b/configs/jethub_j80_defconfig @@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905w-jethome-jethub-j80" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905w-jethome-jethub-j80" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXL=y diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig index 59ef33723e4..50f8b306505 100644 --- a/configs/khadas-vim2_defconfig +++ b/configs/khadas-vim2_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxm-khadas-vim2" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxm-khadas-vim2" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXM=y diff --git a/configs/khadas-vim3_android_ab_defconfig b/configs/khadas-vim3_android_ab_defconfig index ee62fe36d41..37b8d6a9256 100644 --- a/configs/khadas-vim3_android_ab_defconfig +++ b/configs/khadas-vim3_android_ab_defconfig @@ -10,7 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x0 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-a311d-khadas-vim3" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-a311d-khadas-vim3" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/khadas-vim3_android_defconfig b/configs/khadas-vim3_android_defconfig index cecbe506179..55d59dd4813 100644 --- a/configs/khadas-vim3_android_defconfig +++ b/configs/khadas-vim3_android_defconfig @@ -10,7 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x0 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-a311d-khadas-vim3" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-a311d-khadas-vim3" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/khadas-vim3_defconfig b/configs/khadas-vim3_defconfig index 5df4b92143b..32579b8ac36 100644 --- a/configs/khadas-vim3_defconfig +++ b/configs/khadas-vim3_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-a311d-khadas-vim3" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-a311d-khadas-vim3" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/khadas-vim3l_android_ab_defconfig b/configs/khadas-vim3l_android_ab_defconfig index ec4e0dc72e2..95e70275cc4 100644 --- a/configs/khadas-vim3l_android_ab_defconfig +++ b/configs/khadas-vim3l_android_ab_defconfig @@ -10,7 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x0 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-khadas-vim3l" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-khadas-vim3l" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/khadas-vim3l_android_defconfig b/configs/khadas-vim3l_android_defconfig index 206f8defca6..6372d119894 100644 --- a/configs/khadas-vim3l_android_defconfig +++ b/configs/khadas-vim3l_android_defconfig @@ -10,7 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x0 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-khadas-vim3l" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-khadas-vim3l" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/khadas-vim3l_defconfig b/configs/khadas-vim3l_defconfig index de8fdd83cce..b9f4690045a 100644 --- a/configs/khadas-vim3l_defconfig +++ b/configs/khadas-vim3l_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-khadas-vim3l" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-khadas-vim3l" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig index 5ed7c1a4083..ac00e8975e1 100644 --- a/configs/khadas-vim_defconfig +++ b/configs/khadas-vim_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905x-khadas-vim" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905x-khadas-vim" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXL=y diff --git a/configs/libretech-ac_defconfig b/configs/libretech-ac_defconfig index f0ab19580c6..6ad04570022 100644 --- a/configs/libretech-ac_defconfig +++ b/configs/libretech-ac_defconfig @@ -9,7 +9,7 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xFFFF0000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s805x-libretech-ac" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s805x-libretech-ac" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXL=y diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig index bb1a37a0cda..beb919ca6e8 100644 --- a/configs/libretech-cc_defconfig +++ b/configs/libretech-cc_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905x-libretech-cc" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905x-libretech-cc" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXL=y diff --git a/configs/libretech-cc_v2_defconfig b/configs/libretech-cc_v2_defconfig index 8949e240c93..784a269fd5b 100644 --- a/configs/libretech-cc_v2_defconfig +++ b/configs/libretech-cc_v2_defconfig @@ -8,7 +8,7 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xFFFF0000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905x-libretech-cc-v2" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905x-libretech-cc-v2" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXL=y diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig index a5dc3115fcb..0adc0afdf30 100644 --- a/configs/libretech-s905d-pc_defconfig +++ b/configs/libretech-s905d-pc_defconfig @@ -9,7 +9,7 @@ CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0xFFFF0000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905d-libretech-pc" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905d-libretech-pc" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXL=y diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig index 68f462eeff0..cbce0cf4000 100644 --- a/configs/libretech-s912-pc_defconfig +++ b/configs/libretech-s912-pc_defconfig @@ -8,7 +8,7 @@ CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0xFFFF0000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxm-s912-libretech-pc" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxm-s912-libretech-pc" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXM=y diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index 99bdbc14836..ad060079a77 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -15,7 +15,7 @@ CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-lschlv2" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-lschlv2" CONFIG_IDENT_STRING=" LS-CHLv2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_HAS_BOARD_SIZE_LIMIT=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index bb0a5ddf506..b2d9f0c9d8a 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -16,7 +16,7 @@ CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-lsxhl" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-lsxhl" CONFIG_IDENT_STRING=" LS-XHL" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_HAS_BOARD_SIZE_LIMIT=y diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index f01b26f2dfd..4ea342a0434 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -10,7 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_TARGET_NAS220=y CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0xA0000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas220" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-blackarmor-nas220" CONFIG_IDENT_STRING="\nNAS 220" CONFIG_SYS_LOAD_ADDR=0x800000 # CONFIG_SYS_MALLOC_F is not set diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig index dda627aac66..39cbc3384ff 100644 --- a/configs/net2big_v2_defconfig +++ b/configs/net2big_v2_defconfig @@ -12,7 +12,7 @@ CONFIG_NET2BIG_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-net2big" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-net2big" CONFIG_IDENT_STRING=" 2Big v2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig index 742e6205d89..cd416cb1501 100644 --- a/configs/netspace_lite_v2_defconfig +++ b/configs/netspace_lite_v2_defconfig @@ -12,7 +12,7 @@ CONFIG_NETSPACE_LITE_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2lite" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ns2lite" CONFIG_IDENT_STRING=" NS v2 Lite" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig index 7779e6815e2..6a3d9296ac5 100644 --- a/configs/netspace_max_v2_defconfig +++ b/configs/netspace_max_v2_defconfig @@ -12,7 +12,7 @@ CONFIG_NETSPACE_MAX_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2max" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ns2max" CONFIG_IDENT_STRING=" NS Max v2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig index 9e3614bb446..e25631b09f4 100644 --- a/configs/netspace_mini_v2_defconfig +++ b/configs/netspace_mini_v2_defconfig @@ -12,7 +12,7 @@ CONFIG_NETSPACE_MINI_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2mini" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ns2mini" CONFIG_IDENT_STRING=" NS v2 Mini" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig index 1583a0adb3a..b6ac2a8b198 100644 --- a/configs/netspace_v2_defconfig +++ b/configs/netspace_v2_defconfig @@ -12,7 +12,7 @@ CONFIG_NETSPACE_V2=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ns2" CONFIG_IDENT_STRING=" NS v2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig index 89d8b18b168..e859a43ffa3 100644 --- a/configs/nsa310s_defconfig +++ b/configs/nsa310s_defconfig @@ -13,7 +13,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NSA310S=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xE0000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa310s" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-nsa310s" CONFIG_DEBUG_UART_BASE=0xf1012000 CONFIG_DEBUG_UART_CLOCK=166666667 CONFIG_IDENT_STRING="\nZyXEL NSA310S/320S 1/2-Bay Power Media Server" diff --git a/configs/nsa325_defconfig b/configs/nsa325_defconfig index 5da4a002b40..88a890002ea 100644 --- a/configs/nsa325_defconfig +++ b/configs/nsa325_defconfig @@ -13,7 +13,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NSA325=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xC0000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa325" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-nsa325" CONFIG_IDENT_STRING="\nZyXEL NSA325 2-Bay Power Media Server" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_PCI=y diff --git a/configs/odroid-c4_defconfig b/configs/odroid-c4_defconfig index fe1f8612580..4ef1e681666 100644 --- a/configs/odroid-c4_defconfig +++ b/configs/odroid-c4_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-odroid-c4" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-odroid-c4" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/odroid-go-ultra_defconfig b/configs/odroid-go-ultra_defconfig index 49d628b76ab..06437fe3ae0 100644 --- a/configs/odroid-go-ultra_defconfig +++ b/configs/odroid-go-ultra_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-odroid-go-ultra" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-odroid-go-ultra" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/odroid-hc4_defconfig b/configs/odroid-hc4_defconfig index 7720ab5eb81..60233fb9cee 100644 --- a/configs/odroid-hc4_defconfig +++ b/configs/odroid-hc4_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-odroid-hc4" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-odroid-hc4" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/odroid-n2_defconfig b/configs/odroid-n2_defconfig index 9694f04a66e..a4cc766f84a 100644 --- a/configs/odroid-n2_defconfig +++ b/configs/odroid-n2_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-odroid-n2" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-odroid-n2" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/odroid-n2l_defconfig b/configs/odroid-n2l_defconfig index 673e0cffb24..3f657d18812 100644 --- a/configs/odroid-n2l_defconfig +++ b/configs/odroid-n2l_defconfig @@ -7,7 +7,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-odroid-n2l" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-odroid-n2l" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig index 29a14e0927c..057dd28dffd 100644 --- a/configs/openrd_base_defconfig +++ b/configs/openrd_base_defconfig @@ -11,7 +11,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_TARGET_OPENRD=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x80000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-base" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-openrd-base" CONFIG_IDENT_STRING="\nOpenRD-Base" CONFIG_SYS_LOAD_ADDR=0x800000 # CONFIG_SYS_MALLOC_F is not set diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig index a95a435bdf9..05e4292764f 100644 --- a/configs/openrd_client_defconfig +++ b/configs/openrd_client_defconfig @@ -12,7 +12,7 @@ CONFIG_TARGET_OPENRD=y CONFIG_BOARD_IS_OPENRD_CLIENT=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x80000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-client" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-openrd-client" CONFIG_IDENT_STRING="\nOpenRD-Client" CONFIG_SYS_LOAD_ADDR=0x800000 # CONFIG_SYS_MALLOC_F is not set diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig index e3f5294ff13..6e13c6eabdd 100644 --- a/configs/openrd_ultimate_defconfig +++ b/configs/openrd_ultimate_defconfig @@ -12,7 +12,7 @@ CONFIG_TARGET_OPENRD=y CONFIG_BOARD_IS_OPENRD_ULTIMATE=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x80000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-ultimate" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-openrd-ultimate" CONFIG_IDENT_STRING="\nOpenRD-Ultimate" CONFIG_SYS_LOAD_ADDR=0x800000 # CONFIG_SYS_MALLOC_F is not set diff --git a/configs/p212_defconfig b/configs/p212_defconfig index 6b73607d641..9cf22ca4db7 100644 --- a/configs/p212_defconfig +++ b/configs/p212_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905x-p212" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905x-p212" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXL=y diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig index e53ccf34c7d..880cb20b220 100644 --- a/configs/pogo_e02_defconfig +++ b/configs/pogo_e02_defconfig @@ -13,7 +13,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_POGO_E02=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xC0000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogo_e02" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-pogo_e02" CONFIG_IDENT_STRING="\nPogo E02" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BOOTDELAY=3 diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig index 95e22b3fef6..50046e83b77 100644 --- a/configs/pogo_v4_defconfig +++ b/configs/pogo_v4_defconfig @@ -12,7 +12,7 @@ CONFIG_TEXT_BASE=0x600000 CONFIG_TARGET_POGO_V4=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0xC0000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogoplug-series-4" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-pogoplug-series-4" CONFIG_IDENT_STRING="\nPogoplug V4" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_PCI=y diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig index 222db6448ab..1abb57345ff 100644 --- a/configs/qcom_defconfig +++ b/configs/qcom_defconfig @@ -18,33 +18,58 @@ CONFIG_LOG_DEFAULT_LEVEL=4 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_EEPROM=y +CONFIG_SYS_I2C_EEPROM_BUS=2 +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 +# CONFIG_CMD_BIND is not set CONFIG_CMD_CLK=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_UFS=y CONFIG_CMD_USB=y CONFIG_CMD_CAT=y CONFIG_CMD_BMP=y CONFIG_CMD_LOG=y -# CONFIG_NET is not set +CONFIG_OF_LIVE=y CONFIG_BUTTON_QCOM_PMIC=y CONFIG_CLK=y CONFIG_CLK_QCOM_QCS404=y CONFIG_CLK_QCOM_SDM845=y CONFIG_MSM_GPIO=y CONFIG_QCOM_PMIC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_QUP=y +CONFIG_I2C_MUX=y CONFIG_DM_KEYBOARD=y CONFIG_BUTTON_KEYBOARD=y +CONFIG_IOMMU=y +CONFIG_QCOM_HYP_SMMU=y +CONFIG_MISC=y +CONFIG_NVMEM=y +CONFIG_I2C_EEPROM=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ADMA=y CONFIG_MMC_SDHCI_MSM=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_MDIO=y +CONFIG_DM_ETH_PHY=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_QCOM=y +CONFIG_RGMII=y CONFIG_PHY=y +CONFIG_PHY_QCOM_QUSB2=y +CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y CONFIG_PINCTRL=y CONFIG_PINCTRL_QCOM_QCS404=y CONFIG_PINCTRL_QCOM_SDM845=y CONFIG_DM_PMIC=y CONFIG_PMIC_QCOM=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y CONFIG_SCSI=y CONFIG_MSM_SERIAL=y CONFIG_MSM_GENI_SERIAL=y @@ -55,6 +80,10 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_MASS_STORAGE=y CONFIG_UFS=y CONFIG_VIDEO=y # CONFIG_VIDEO_FONT_8X16 is not set diff --git a/configs/radxa-zero2_defconfig b/configs/radxa-zero2_defconfig index b795681b3f0..92e0a8833cc 100644 --- a/configs/radxa-zero2_defconfig +++ b/configs/radxa-zero2_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-radxa-zero2" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-radxa-zero2" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/radxa-zero_defconfig b/configs/radxa-zero_defconfig index 103ff8a321d..5179c58dadc 100644 --- a/configs/radxa-zero_defconfig +++ b/configs/radxa-zero_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12a-radxa-zero" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12a-radxa-zero" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/s400_defconfig b/configs/s400_defconfig index 8e22c95f882..d75d296fa0e 100644 --- a/configs/s400_defconfig +++ b/configs/s400_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-axg-s400" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-axg-s400" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_AXG=y diff --git a/configs/sei510_defconfig b/configs/sei510_defconfig index c4a49fbd6f0..791979e7449 100644 --- a/configs/sei510_defconfig +++ b/configs/sei510_defconfig @@ -10,7 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0xFFFF0000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12a-sei510" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12a-sei510" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/sei610_defconfig b/configs/sei610_defconfig index ae254c62f2a..ce5374319ba 100644 --- a/configs/sei610_defconfig +++ b/configs/sei610_defconfig @@ -10,7 +10,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0xFFFF0000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-sei610" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-sei610" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index 0af87dc4fba..b673b3f6da2 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -13,7 +13,7 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_SHEEVAPLUG=y CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x80000 -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-sheevaplug" +CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-sheevaplug" CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_HAS_BOARD_SIZE_LIMIT=y diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig index 29148402a1a..f2b39115fef 100644 --- a/configs/turris_omnia_defconfig +++ b/configs/turris_omnia_defconfig @@ -31,6 +31,7 @@ CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y CONFIG_SYS_MEMTEST_START=0x00800000 CONFIG_SYS_MEMTEST_END=0x00ffffff +CONFIG_LTO=y CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=983040 CONFIG_FIT=y @@ -64,6 +65,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MTD=y CONFIG_CMD_PCI=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_SATA=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y @@ -71,6 +73,7 @@ CONFIG_CMD_WDT=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y +CONFIG_CMD_RNG=y CONFIG_CMD_AES=y CONFIG_CMD_HASH=y CONFIG_CMD_BTRFS=y @@ -105,6 +108,7 @@ CONFIG_NVME_PCI=y CONFIG_PCI_MVEBU=y CONFIG_PINCTRL=y CONFIG_PINCTRL_ARMADA_38X=y +CONFIG_DM_RNG=y CONFIG_DM_RTC=y CONFIG_RTC_ARMADA38X=y CONFIG_SERIAL_PROBE_ALL=y @@ -112,6 +116,8 @@ CONFIG_SPL_DEBUG_UART_BASE=0xd0012000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y CONFIG_KIRKWOOD_SPI=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_CMD_POWEROFF=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/u200_defconfig b/configs/u200_defconfig index 21c90e7678e..879ae0defa7 100644 --- a/configs/u200_defconfig +++ b/configs/u200_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-g12a-u200" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12a-u200" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_G12A=y diff --git a/configs/wetek-core2_defconfig b/configs/wetek-core2_defconfig index 01ffb8bbd75..c4b126c2b7e 100644 --- a/configs/wetek-core2_defconfig +++ b/configs/wetek-core2_defconfig @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_ENV_SIZE=0x2000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="meson-gxm-wetek-core2" +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxm-wetek-core2" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_MESON_GXM=y diff --git a/doc/board/amlogic/jethub-j100.rst b/doc/board/amlogic/jethub-j100.rst index 86acdafa06f..cbf1ea76107 100644 --- a/doc/board/amlogic/jethub-j100.rst +++ b/doc/board/amlogic/jethub-j100.rst @@ -1,9 +1,9 @@ .. SPDX-License-Identifier: GPL-2.0+ -U-Boot for JetHub J100 (A113X) -============================== +U-Boot for JetHub J100/J110 (A113X) +=================================== -JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller device +JetHome Jethub D1/D1+ (http://jethome.ru/jethub-d1p) is a home automation controller device manufactured by JetHome with the following specifications: - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz @@ -23,7 +23,10 @@ manufactured by JetHome with the following specifications: The basic version also has: - - TI CC2538 + CC2592 Zigbee Wireless with upto 20dBm output power and Zigbee 3.0 + - Zigbee module one from: + - TI CC2538 + CC2592 Zigbee 3.0 Wireless + - TI CC2652P1 Zigbee 3.0 Wireless + - Silicon Labs EFT32MG21 Zigbee 3.0/Thread Wireless - 1 x 1-Wire - 2 x RS-485 - 4 x dry contact digital GPIO inputs diff --git a/drivers/clk/exynos/clk-exynos850.c b/drivers/clk/exynos/clk-exynos850.c index cf94a3e1b64..0c09ba02de4 100644 --- a/drivers/clk/exynos/clk-exynos850.c +++ b/drivers/clk/exynos/clk-exynos850.c @@ -10,6 +10,13 @@ #include <dt-bindings/clock/exynos850.h> #include "clk.h" +enum exynos850_cmu_id { + CMU_TOP, + CMU_PERI, + CMU_CORE, + CMU_HSI, +}; + /* ---- CMU_TOP ------------------------------------------------------------- */ /* Register Offset definitions for CMU_TOP (0x120e0000) */ @@ -19,9 +26,23 @@ #define PLL_CON3_PLL_SHARED0 0x014c #define PLL_CON0_PLL_SHARED1 0x0180 #define PLL_CON3_PLL_SHARED1 0x018c +#define CLK_CON_MUX_MUX_CLKCMU_CORE_BUS 0x1014 +#define CLK_CON_MUX_MUX_CLKCMU_CORE_CCI 0x1018 +#define CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD 0x101c +#define CLK_CON_MUX_MUX_CLKCMU_CORE_SSS 0x1020 +#define CLK_CON_MUX_MUX_CLKCMU_HSI_BUS 0x103c +#define CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD 0x1040 +#define CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD 0x1044 #define CLK_CON_MUX_MUX_CLKCMU_PERI_BUS 0x1070 #define CLK_CON_MUX_MUX_CLKCMU_PERI_IP 0x1074 #define CLK_CON_MUX_MUX_CLKCMU_PERI_UART 0x1078 +#define CLK_CON_DIV_CLKCMU_CORE_BUS 0x1820 +#define CLK_CON_DIV_CLKCMU_CORE_CCI 0x1824 +#define CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD 0x1828 +#define CLK_CON_DIV_CLKCMU_CORE_SSS 0x182c +#define CLK_CON_DIV_CLKCMU_HSI_BUS 0x1848 +#define CLK_CON_DIV_CLKCMU_HSI_MMC_CARD 0x184c +#define CLK_CON_DIV_CLKCMU_HSI_USB20DRD 0x1850 #define CLK_CON_DIV_CLKCMU_PERI_BUS 0x187c #define CLK_CON_DIV_CLKCMU_PERI_IP 0x1880 #define CLK_CON_DIV_CLKCMU_PERI_UART 0x1884 @@ -31,23 +52,40 @@ #define CLK_CON_DIV_PLL_SHARED1_DIV2 0x1898 #define CLK_CON_DIV_PLL_SHARED1_DIV3 0x189c #define CLK_CON_DIV_PLL_SHARED1_DIV4 0x18a0 +#define CLK_CON_GAT_GATE_CLKCMU_CORE_BUS 0x201c +#define CLK_CON_GAT_GATE_CLKCMU_CORE_CCI 0x2020 +#define CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD 0x2024 +#define CLK_CON_GAT_GATE_CLKCMU_CORE_SSS 0x2028 +#define CLK_CON_GAT_GATE_CLKCMU_HSI_BUS 0x2044 +#define CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD 0x2048 +#define CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD 0x204c #define CLK_CON_GAT_GATE_CLKCMU_PERI_BUS 0x2080 #define CLK_CON_GAT_GATE_CLKCMU_PERI_IP 0x2084 #define CLK_CON_GAT_GATE_CLKCMU_PERI_UART 0x2088 -static const struct samsung_pll_clock top_pure_pll_clks[] = { - PLL(pll_0822x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "clock-oscclk", - PLL_CON3_PLL_SHARED0), - PLL(pll_0822x, CLK_FOUT_SHARED1_PLL, "fout_shared1_pll", "clock-oscclk", - PLL_CON3_PLL_SHARED1), - PLL(pll_0831x, CLK_FOUT_MMC_PLL, "fout_mmc_pll", "clock-oscclk", - PLL_CON3_PLL_MMC), -}; - -/* List of parent clocks for Muxes in CMU_TOP */ +/* List of parent clocks for Muxes in CMU_TOP: for PURECLKCOMP */ PNAME(mout_shared0_pll_p) = { "clock-oscclk", "fout_shared0_pll" }; PNAME(mout_shared1_pll_p) = { "clock-oscclk", "fout_shared1_pll" }; PNAME(mout_mmc_pll_p) = { "clock-oscclk", "fout_mmc_pll" }; +/* List of parent clocks for Muxes in CMU_TOP: for CMU_CORE */ +PNAME(mout_core_bus_p) = { "dout_shared1_div2", "dout_shared0_div3", + "dout_shared1_div3", "dout_shared0_div4" }; +PNAME(mout_core_cci_p) = { "dout_shared0_div2", "dout_shared1_div2", + "dout_shared0_div3", "dout_shared1_div3" }; +PNAME(mout_core_mmc_embd_p) = { "clock-oscclk", "dout_shared0_div2", + "dout_shared1_div2", "dout_shared0_div3", + "dout_shared1_div3", "mout_mmc_pll", + "clock-oscclk", "clock-oscclk" }; +PNAME(mout_core_sss_p) = { "dout_shared0_div3", "dout_shared1_div3", + "dout_shared0_div4", "dout_shared1_div4" }; +/* List of parent clocks for Muxes in CMU_TOP: for CMU_HSI */ +PNAME(mout_hsi_bus_p) = { "dout_shared0_div2", "dout_shared1_div2" }; +PNAME(mout_hsi_mmc_card_p) = { "clock-oscclk", "dout_shared0_div2", + "dout_shared1_div2", "dout_shared0_div3", + "dout_shared1_div3", "mout_mmc_pll", + "clock-oscclk", "clock-oscclk" }; +PNAME(mout_hsi_usb20drd_p) = { "clock-oscclk", "dout_shared0_div4", + "dout_shared1_div4", "clock-oscclk" }; /* List of parent clocks for Muxes in CMU_TOP: for CMU_PERI */ PNAME(mout_peri_bus_p) = { "dout_shared0_div4", "dout_shared1_div4" }; PNAME(mout_peri_uart_p) = { "clock-oscclk", "dout_shared0_div4", @@ -55,6 +93,17 @@ PNAME(mout_peri_uart_p) = { "clock-oscclk", "dout_shared0_div4", PNAME(mout_peri_ip_p) = { "clock-oscclk", "dout_shared0_div4", "dout_shared1_div4", "clock-oscclk" }; +/* PURECLKCOMP */ + +static const struct samsung_pll_clock top_pure_pll_clks[] = { + PLL(pll_0822x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "clock-oscclk", + PLL_CON3_PLL_SHARED0), + PLL(pll_0822x, CLK_FOUT_SHARED1_PLL, "fout_shared1_pll", "clock-oscclk", + PLL_CON3_PLL_SHARED1), + PLL(pll_0831x, CLK_FOUT_MMC_PLL, "fout_mmc_pll", "clock-oscclk", + PLL_CON3_PLL_MMC), +}; + static const struct samsung_mux_clock top_pure_mux_clks[] = { MUX(CLK_MOUT_SHARED0_PLL, "mout_shared0_pll", mout_shared0_pll_p, PLL_CON0_PLL_SHARED0, 4, 1), @@ -64,15 +113,6 @@ static const struct samsung_mux_clock top_pure_mux_clks[] = { PLL_CON0_PLL_MMC, 4, 1), }; -static const struct samsung_mux_clock top_peri_mux_clks[] = { - MUX(CLK_MOUT_PERI_BUS, "mout_peri_bus", mout_peri_bus_p, - CLK_CON_MUX_MUX_CLKCMU_PERI_BUS, 0, 1), - MUX(CLK_MOUT_PERI_UART, "mout_peri_uart", mout_peri_uart_p, - CLK_CON_MUX_MUX_CLKCMU_PERI_UART, 0, 2), - MUX(CLK_MOUT_PERI_IP, "mout_peri_ip", mout_peri_ip_p, - CLK_CON_MUX_MUX_CLKCMU_PERI_IP, 0, 2), -}; - static const struct samsung_div_clock top_pure_div_clks[] = { DIV(CLK_DOUT_SHARED0_DIV3, "dout_shared0_div3", "mout_shared0_pll", CLK_CON_DIV_PLL_SHARED0_DIV3, 0, 2), @@ -88,13 +128,79 @@ static const struct samsung_div_clock top_pure_div_clks[] = { CLK_CON_DIV_PLL_SHARED1_DIV4, 0, 1), }; -static const struct samsung_div_clock top_peri_div_clks[] = { - DIV(CLK_DOUT_PERI_BUS, "dout_peri_bus", "gout_peri_bus", - CLK_CON_DIV_CLKCMU_PERI_BUS, 0, 4), - DIV(CLK_DOUT_PERI_UART, "dout_peri_uart", "gout_peri_uart", - CLK_CON_DIV_CLKCMU_PERI_UART, 0, 4), - DIV(CLK_DOUT_PERI_IP, "dout_peri_ip", "gout_peri_ip", - CLK_CON_DIV_CLKCMU_PERI_IP, 0, 4), +/* CORE */ + +static const struct samsung_mux_clock top_core_mux_clks[] = { + MUX(CLK_MOUT_CORE_BUS, "mout_core_bus", mout_core_bus_p, + CLK_CON_MUX_MUX_CLKCMU_CORE_BUS, 0, 2), + MUX(CLK_MOUT_CORE_CCI, "mout_core_cci", mout_core_cci_p, + CLK_CON_MUX_MUX_CLKCMU_CORE_CCI, 0, 2), + MUX(CLK_MOUT_CORE_MMC_EMBD, "mout_core_mmc_embd", mout_core_mmc_embd_p, + CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD, 0, 3), + MUX(CLK_MOUT_CORE_SSS, "mout_core_sss", mout_core_sss_p, + CLK_CON_MUX_MUX_CLKCMU_CORE_SSS, 0, 2), +}; + +static const struct samsung_gate_clock top_core_gate_clks[] = { + GATE(CLK_GOUT_CORE_BUS, "gout_core_bus", "mout_core_bus", + CLK_CON_GAT_GATE_CLKCMU_CORE_BUS, 21, 0, 0), + GATE(CLK_GOUT_CORE_CCI, "gout_core_cci", "mout_core_cci", + CLK_CON_GAT_GATE_CLKCMU_CORE_CCI, 21, 0, 0), + GATE(CLK_GOUT_CORE_MMC_EMBD, "gout_core_mmc_embd", "mout_core_mmc_embd", + CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD, 21, 0, 0), + GATE(CLK_GOUT_CORE_SSS, "gout_core_sss", "mout_core_sss", + CLK_CON_GAT_GATE_CLKCMU_CORE_SSS, 21, 0, 0), +}; + +static const struct samsung_div_clock top_core_div_clks[] = { + DIV(CLK_DOUT_CORE_BUS, "dout_core_bus", "gout_core_bus", + CLK_CON_DIV_CLKCMU_CORE_BUS, 0, 4), + DIV(CLK_DOUT_CORE_CCI, "dout_core_cci", "gout_core_cci", + CLK_CON_DIV_CLKCMU_CORE_CCI, 0, 4), + DIV(CLK_DOUT_CORE_MMC_EMBD, "dout_core_mmc_embd", "gout_core_mmc_embd", + CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD, 0, 9), + DIV(CLK_DOUT_CORE_SSS, "dout_core_sss", "gout_core_sss", + CLK_CON_DIV_CLKCMU_CORE_SSS, 0, 4), +}; + +/* HSI */ + +static const struct samsung_mux_clock top_hsi_mux_clks[] = { + MUX(CLK_MOUT_HSI_BUS, "mout_hsi_bus", mout_hsi_bus_p, + CLK_CON_MUX_MUX_CLKCMU_HSI_BUS, 0, 1), + MUX(CLK_MOUT_HSI_MMC_CARD, "mout_hsi_mmc_card", mout_hsi_mmc_card_p, + CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD, 0, 3), + MUX(CLK_MOUT_HSI_USB20DRD, "mout_hsi_usb20drd", mout_hsi_usb20drd_p, + CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD, 0, 2), +}; + +static const struct samsung_gate_clock top_hsi_gate_clks[] = { + GATE(CLK_GOUT_HSI_BUS, "gout_hsi_bus", "mout_hsi_bus", + CLK_CON_GAT_GATE_CLKCMU_HSI_BUS, 21, 0, 0), + GATE(CLK_GOUT_HSI_MMC_CARD, "gout_hsi_mmc_card", "mout_hsi_mmc_card", + CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD, 21, 0, 0), + GATE(CLK_GOUT_HSI_USB20DRD, "gout_hsi_usb20drd", "mout_hsi_usb20drd", + CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD, 21, 0, 0), +}; + +static const struct samsung_div_clock top_hsi_div_clks[] = { + DIV(CLK_DOUT_HSI_BUS, "dout_hsi_bus", "gout_hsi_bus", + CLK_CON_DIV_CLKCMU_HSI_BUS, 0, 4), + DIV(CLK_DOUT_HSI_MMC_CARD, "dout_hsi_mmc_card", "gout_hsi_mmc_card", + CLK_CON_DIV_CLKCMU_HSI_MMC_CARD, 0, 9), + DIV(CLK_DOUT_HSI_USB20DRD, "dout_hsi_usb20drd", "gout_hsi_usb20drd", + CLK_CON_DIV_CLKCMU_HSI_USB20DRD, 0, 4), +}; + +/* PERI */ + +static const struct samsung_mux_clock top_peri_mux_clks[] = { + MUX(CLK_MOUT_PERI_BUS, "mout_peri_bus", mout_peri_bus_p, + CLK_CON_MUX_MUX_CLKCMU_PERI_BUS, 0, 1), + MUX(CLK_MOUT_PERI_UART, "mout_peri_uart", mout_peri_uart_p, + CLK_CON_MUX_MUX_CLKCMU_PERI_UART, 0, 2), + MUX(CLK_MOUT_PERI_IP, "mout_peri_ip", mout_peri_ip_p, + CLK_CON_MUX_MUX_CLKCMU_PERI_IP, 0, 2), }; static const struct samsung_gate_clock top_peri_gate_clks[] = { @@ -106,12 +212,31 @@ static const struct samsung_gate_clock top_peri_gate_clks[] = { CLK_CON_GAT_GATE_CLKCMU_PERI_IP, 21, 0, 0), }; +static const struct samsung_div_clock top_peri_div_clks[] = { + DIV(CLK_DOUT_PERI_BUS, "dout_peri_bus", "gout_peri_bus", + CLK_CON_DIV_CLKCMU_PERI_BUS, 0, 4), + DIV(CLK_DOUT_PERI_UART, "dout_peri_uart", "gout_peri_uart", + CLK_CON_DIV_CLKCMU_PERI_UART, 0, 4), + DIV(CLK_DOUT_PERI_IP, "dout_peri_ip", "gout_peri_ip", + CLK_CON_DIV_CLKCMU_PERI_IP, 0, 4), +}; + static const struct samsung_clk_group top_cmu_clks[] = { /* CMU_TOP_PURECLKCOMP */ { S_CLK_PLL, top_pure_pll_clks, ARRAY_SIZE(top_pure_pll_clks) }, { S_CLK_MUX, top_pure_mux_clks, ARRAY_SIZE(top_pure_mux_clks) }, { S_CLK_DIV, top_pure_div_clks, ARRAY_SIZE(top_pure_div_clks) }, + /* CMU_TOP clocks for CMU_CORE */ + { S_CLK_MUX, top_core_mux_clks, ARRAY_SIZE(top_core_mux_clks) }, + { S_CLK_GATE, top_core_gate_clks, ARRAY_SIZE(top_core_gate_clks) }, + { S_CLK_DIV, top_core_div_clks, ARRAY_SIZE(top_core_div_clks) }, + + /* CMU_TOP clocks for CMU_HSI */ + { S_CLK_MUX, top_hsi_mux_clks, ARRAY_SIZE(top_hsi_mux_clks) }, + { S_CLK_GATE, top_hsi_gate_clks, ARRAY_SIZE(top_hsi_gate_clks) }, + { S_CLK_DIV, top_hsi_div_clks, ARRAY_SIZE(top_hsi_div_clks) }, + /* CMU_TOP clocks for CMU_PERI */ { S_CLK_MUX, top_peri_mux_clks, ARRAY_SIZE(top_peri_mux_clks) }, { S_CLK_GATE, top_peri_gate_clks, ARRAY_SIZE(top_peri_gate_clks) }, @@ -120,7 +245,7 @@ static const struct samsung_clk_group top_cmu_clks[] = { static int exynos850_cmu_top_probe(struct udevice *dev) { - return samsung_cmu_register_one(dev, top_cmu_clks, + return samsung_cmu_register_one(dev, CMU_TOP, top_cmu_clks, ARRAY_SIZE(top_cmu_clks)); } @@ -129,11 +254,13 @@ static const struct udevice_id exynos850_cmu_top_ids[] = { { } }; +SAMSUNG_CLK_OPS(exynos850_cmu_top, CMU_TOP); + U_BOOT_DRIVER(exynos850_cmu_top) = { .name = "exynos850-cmu-top", .id = UCLASS_CLK, .of_match = exynos850_cmu_top_ids, - .ops = &ccf_clk_ops, + .ops = &exynos850_cmu_top_clk_ops, .probe = exynos850_cmu_top_probe, .flags = DM_FLAG_PRE_RELOC, }; @@ -171,7 +298,8 @@ static const struct samsung_clk_group peri_cmu_clks[] = { static int exynos850_cmu_peri_probe(struct udevice *dev) { - return samsung_register_cmu(dev, peri_cmu_clks, exynos850_cmu_top); + return samsung_register_cmu(dev, CMU_PERI, peri_cmu_clks, + exynos850_cmu_top); } static const struct udevice_id exynos850_cmu_peri_ids[] = { @@ -179,11 +307,149 @@ static const struct udevice_id exynos850_cmu_peri_ids[] = { { } }; +SAMSUNG_CLK_OPS(exynos850_cmu_peri, CMU_PERI); + U_BOOT_DRIVER(exynos850_cmu_peri) = { .name = "exynos850-cmu-peri", .id = UCLASS_CLK, .of_match = exynos850_cmu_peri_ids, - .ops = &ccf_clk_ops, + .ops = &exynos850_cmu_peri_clk_ops, .probe = exynos850_cmu_peri_probe, .flags = DM_FLAG_PRE_RELOC, }; + +/* ---- CMU_CORE ------------------------------------------------------------ */ + +/* Register Offset definitions for CMU_CORE (0x12000000) */ +#define PLL_CON0_MUX_CLKCMU_CORE_BUS_USER 0x0600 +#define PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER 0x0620 +#define CLK_CON_DIV_DIV_CLK_CORE_BUSP 0x1800 +#define CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK 0x20e8 +#define CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN 0x20ec + +/* List of parent clocks for Muxes in CMU_CORE */ +PNAME(mout_core_bus_user_p) = { "clock-oscclk", "dout_core_bus" }; +PNAME(mout_core_mmc_embd_user_p) = { "clock-oscclk", + "dout_core_mmc_embd" }; + +static const struct samsung_mux_clock core_mux_clks[] = { + MUX(CLK_MOUT_CORE_BUS_USER, "mout_core_bus_user", mout_core_bus_user_p, + PLL_CON0_MUX_CLKCMU_CORE_BUS_USER, 4, 1), + MUX_F(CLK_MOUT_CORE_MMC_EMBD_USER, "mout_core_mmc_embd_user", + mout_core_mmc_embd_user_p, PLL_CON0_MUX_CLKCMU_CORE_MMC_EMBD_USER, + 4, 1, CLK_SET_RATE_PARENT, 0), +}; + +static const struct samsung_div_clock core_div_clks[] = { + DIV(CLK_DOUT_CORE_BUSP, "dout_core_busp", "mout_core_bus_user", + CLK_CON_DIV_DIV_CLK_CORE_BUSP, 0, 2), +}; + +static const struct samsung_gate_clock core_gate_clks[] = { + GATE(CLK_GOUT_MMC_EMBD_ACLK, "gout_mmc_embd_aclk", "dout_core_busp", + CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK, 21, 0, 0), + GATE(CLK_GOUT_MMC_EMBD_SDCLKIN, "gout_mmc_embd_sdclkin", + "mout_core_mmc_embd_user", CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN, + 21, CLK_SET_RATE_PARENT, 0), +}; + +static const struct samsung_clk_group core_cmu_clks[] = { + { S_CLK_MUX, core_mux_clks, ARRAY_SIZE(core_mux_clks) }, + { S_CLK_DIV, core_div_clks, ARRAY_SIZE(core_div_clks) }, + { S_CLK_GATE, core_gate_clks, ARRAY_SIZE(core_gate_clks) }, +}; + +static int exynos850_cmu_core_probe(struct udevice *dev) +{ + return samsung_register_cmu(dev, CMU_CORE, core_cmu_clks, + exynos850_cmu_top); +} + +static const struct udevice_id exynos850_cmu_core_ids[] = { + { .compatible = "samsung,exynos850-cmu-core" }, + { } +}; + +SAMSUNG_CLK_OPS(exynos850_cmu_core, CMU_CORE); + +U_BOOT_DRIVER(exynos850_cmu_core) = { + .name = "exynos850-cmu-core", + .id = UCLASS_CLK, + .of_match = exynos850_cmu_core_ids, + .ops = &exynos850_cmu_core_clk_ops, + .probe = exynos850_cmu_core_probe, + .flags = DM_FLAG_PRE_RELOC, +}; + +/* ---- CMU_HSI ------------------------------------------------------------- */ + +/* Register Offset definitions for CMU_HSI (0x13400000) */ +#define PLL_CON0_MUX_CLKCMU_HSI_BUS_USER 0x0600 +#define PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER 0x0610 +#define PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER 0x0620 +#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50 0x200c +#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26 0x2010 +#define CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK 0x2024 +#define CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN 0x2028 +#define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20 0x203c +#define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY 0x2040 + +/* List of parent clocks for Muxes in CMU_HSI */ +PNAME(mout_hsi_bus_user_p) = { "clock-oscclk", "dout_hsi_bus" }; +PNAME(mout_hsi_mmc_card_user_p) = { "clock-oscclk", "dout_hsi_mmc_card" }; +PNAME(mout_hsi_usb20drd_user_p) = { "clock-oscclk", "dout_hsi_usb20drd" }; + +static const struct samsung_mux_clock hsi_mux_clks[] __initconst = { + MUX(CLK_MOUT_HSI_BUS_USER, "mout_hsi_bus_user", mout_hsi_bus_user_p, + PLL_CON0_MUX_CLKCMU_HSI_BUS_USER, 4, 1), + MUX_F(CLK_MOUT_HSI_MMC_CARD_USER, "mout_hsi_mmc_card_user", + mout_hsi_mmc_card_user_p, PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER, + 4, 1, CLK_SET_RATE_PARENT, 0), + MUX(CLK_MOUT_HSI_USB20DRD_USER, "mout_hsi_usb20drd_user", + mout_hsi_usb20drd_user_p, PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER, + 4, 1), +}; + +static const struct samsung_gate_clock hsi_gate_clks[] __initconst = { + GATE(CLK_GOUT_USB_REF_CLK, "gout_usb_ref", "mout_hsi_usb20drd_user", + CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50, 21, 0, 0), + GATE(CLK_GOUT_USB_PHY_REF_CLK, "gout_usb_phy_ref", "clock-oscclk", + CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26, 21, 0, 0), + GATE(CLK_GOUT_MMC_CARD_ACLK, "gout_mmc_card_aclk", "mout_hsi_bus_user", + CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK, 21, 0, 0), + GATE(CLK_GOUT_MMC_CARD_SDCLKIN, "gout_mmc_card_sdclkin", + "mout_hsi_mmc_card_user", + CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN, 21, CLK_SET_RATE_PARENT, 0), + GATE(CLK_GOUT_USB_PHY_ACLK, "gout_usb_phy_aclk", "mout_hsi_bus_user", + CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20, 21, 0, 0), + GATE(CLK_GOUT_USB_BUS_EARLY_CLK, "gout_usb_bus_early", + "mout_hsi_bus_user", + CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY, 21, 0, 0), +}; + +static const struct samsung_clk_group hsi_cmu_clks[] = { + { S_CLK_MUX, hsi_mux_clks, ARRAY_SIZE(hsi_mux_clks) }, + { S_CLK_GATE, hsi_gate_clks, ARRAY_SIZE(hsi_gate_clks) }, +}; + +static int exynos850_cmu_hsi_probe(struct udevice *dev) +{ + return samsung_register_cmu(dev, CMU_HSI, hsi_cmu_clks, + exynos850_cmu_hsi); +} + +static const struct udevice_id exynos850_cmu_hsi_ids[] = { + { .compatible = "samsung,exynos850-cmu-hsi" }, + { } +}; + +SAMSUNG_CLK_OPS(exynos850_cmu_hsi, CMU_HSI); + +U_BOOT_DRIVER(exynos850_cmu_hsi) = { + .name = "exynos850-cmu-hsi", + .id = UCLASS_CLK, + .of_match = exynos850_cmu_hsi_ids, + .ops = &exynos850_cmu_hsi_clk_ops, + .probe = exynos850_cmu_hsi_probe, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/clk/exynos/clk-pll.c b/drivers/clk/exynos/clk-pll.c index 4aacbc26b25..542d577eaa6 100644 --- a/drivers/clk/exynos/clk-pll.c +++ b/drivers/clk/exynos/clk-pll.c @@ -136,7 +136,7 @@ static struct clk *_samsung_clk_register_pll(void __iomem *base, return clk; } -void samsung_clk_register_pll(void __iomem *base, +void samsung_clk_register_pll(void __iomem *base, unsigned int cmu_id, const struct samsung_pll_clock *clk_list, unsigned int nr_clk) { @@ -145,10 +145,12 @@ void samsung_clk_register_pll(void __iomem *base, for (cnt = 0; cnt < nr_clk; cnt++) { struct clk *clk; const struct samsung_pll_clock *pll_clk; + unsigned long clk_id; pll_clk = &clk_list[cnt]; clk = _samsung_clk_register_pll(base, pll_clk); - clk_dm(pll_clk->id, clk); + clk_id = SAMSUNG_TO_CLK_ID(cmu_id, pll_clk->id); + clk_dm(clk_id, clk); } } diff --git a/drivers/clk/exynos/clk-pll.h b/drivers/clk/exynos/clk-pll.h index bd79309fa1c..bdc94e7624d 100644 --- a/drivers/clk/exynos/clk-pll.h +++ b/drivers/clk/exynos/clk-pll.h @@ -15,9 +15,15 @@ #include <linux/clk-provider.h> +struct samsung_pll_clock; + enum samsung_pll_type { pll_0822x, pll_0831x, }; +void samsung_clk_register_pll(void __iomem *base, unsigned int cmu_id, + const struct samsung_pll_clock *clk_list, + unsigned int nr_clk); + #endif /* __EXYNOS_CLK_PLL_H */ diff --git a/drivers/clk/exynos/clk.c b/drivers/clk/exynos/clk.c index 430767f072d..943e8bd0189 100644 --- a/drivers/clk/exynos/clk.c +++ b/drivers/clk/exynos/clk.c @@ -10,61 +10,67 @@ #include <dm.h> #include "clk.h" -void samsung_clk_register_mux(void __iomem *base, - const struct samsung_mux_clock *clk_list, - unsigned int nr_clk) +static void samsung_clk_register_mux(void __iomem *base, unsigned int cmu_id, + const struct samsung_mux_clock *clk_list, + unsigned int nr_clk) { unsigned int cnt; for (cnt = 0; cnt < nr_clk; cnt++) { struct clk *clk; const struct samsung_mux_clock *m; + unsigned long clk_id; m = &clk_list[cnt]; clk = clk_register_mux(NULL, m->name, m->parent_names, m->num_parents, m->flags, base + m->offset, m->shift, m->width, m->mux_flags); - clk_dm(m->id, clk); + clk_id = SAMSUNG_TO_CLK_ID(cmu_id, m->id); + clk_dm(clk_id, clk); } } -void samsung_clk_register_div(void __iomem *base, - const struct samsung_div_clock *clk_list, - unsigned int nr_clk) +static void samsung_clk_register_div(void __iomem *base, unsigned int cmu_id, + const struct samsung_div_clock *clk_list, + unsigned int nr_clk) { unsigned int cnt; for (cnt = 0; cnt < nr_clk; cnt++) { struct clk *clk; const struct samsung_div_clock *d; + unsigned long clk_id; d = &clk_list[cnt]; clk = clk_register_divider(NULL, d->name, d->parent_name, d->flags, base + d->offset, d->shift, d->width, d->div_flags); - clk_dm(d->id, clk); + clk_id = SAMSUNG_TO_CLK_ID(cmu_id, d->id); + clk_dm(clk_id, clk); } } -void samsung_clk_register_gate(void __iomem *base, - const struct samsung_gate_clock *clk_list, - unsigned int nr_clk) +static void samsung_clk_register_gate(void __iomem *base, unsigned int cmu_id, + const struct samsung_gate_clock *clk_list, + unsigned int nr_clk) { unsigned int cnt; for (cnt = 0; cnt < nr_clk; cnt++) { struct clk *clk; const struct samsung_gate_clock *g; + unsigned long clk_id; g = &clk_list[cnt]; clk = clk_register_gate(NULL, g->name, g->parent_name, g->flags, base + g->offset, g->bit_idx, g->gate_flags, NULL); - clk_dm(g->id, clk); + clk_id = SAMSUNG_TO_CLK_ID(cmu_id, g->id); + clk_dm(clk_id, clk); } } -typedef void (*samsung_clk_register_fn)(void __iomem *base, +typedef void (*samsung_clk_register_fn)(void __iomem *base, unsigned int cmu_id, const void *clk_list, unsigned int nr_clk); @@ -78,34 +84,37 @@ static const samsung_clk_register_fn samsung_clk_register_fns[] = { /** * samsung_cmu_register_clocks() - Register provided clock groups * @base: Base address of CMU registers + * @cmu_id: CMU index number * @clk_groups: list of clock groups * @nr_groups: count of clock groups in @clk_groups * * Having the array of clock groups @clk_groups makes it possible to keep a * correct clocks registration order. */ -void samsung_cmu_register_clocks(void __iomem *base, - const struct samsung_clk_group *clk_groups, - unsigned int nr_groups) +static void samsung_cmu_register_clocks(void __iomem *base, unsigned int cmu_id, + const struct samsung_clk_group *clk_groups, + unsigned int nr_groups) { unsigned int i; for (i = 0; i < nr_groups; i++) { const struct samsung_clk_group *g = &clk_groups[i]; - samsung_clk_register_fns[g->type](base, g->clk_list, g->nr_clk); + samsung_clk_register_fns[g->type](base, cmu_id, + g->clk_list, g->nr_clk); } } /** * samsung_cmu_register_one - Register all CMU clocks * @dev: CMU device + * @cmu_id: CMU index number * @clk_groups: list of CMU clock groups * @nr_groups: count of CMU clock groups in @clk_groups * * Return: 0 on success or negative value on error. */ -int samsung_cmu_register_one(struct udevice *dev, +int samsung_cmu_register_one(struct udevice *dev, unsigned int cmu_id, const struct samsung_clk_group *clk_groups, unsigned int nr_groups) { @@ -115,7 +124,7 @@ int samsung_cmu_register_one(struct udevice *dev, if (!base) return -EINVAL; - samsung_cmu_register_clocks(base, clk_groups, nr_groups); + samsung_cmu_register_clocks(base, cmu_id, clk_groups, nr_groups); return 0; } diff --git a/drivers/clk/exynos/clk.h b/drivers/clk/exynos/clk.h index 91a51b877a6..ed0a395f0f6 100644 --- a/drivers/clk/exynos/clk.h +++ b/drivers/clk/exynos/clk.h @@ -13,6 +13,51 @@ #include <linux/clk-provider.h> #include "clk-pll.h" +#define _SAMSUNG_CLK_OPS(_name, _cmu) \ +static int _name##_of_xlate(struct clk *clk, \ + struct ofnode_phandle_args *args) \ +{ \ + if (args->args_count > 1) { \ + debug("Invalid args_count: %d\n", args->args_count); \ + return -EINVAL; \ + } \ + \ + if (args->args_count) \ + clk->id = SAMSUNG_TO_CLK_ID(_cmu, args->args[0]); \ + else \ + clk->id = 0; \ + \ + return 0; \ +} \ + \ +static const struct clk_ops _name##_clk_ops = { \ + .set_rate = ccf_clk_set_rate, \ + .get_rate = ccf_clk_get_rate, \ + .set_parent = ccf_clk_set_parent, \ + .enable = ccf_clk_enable, \ + .disable = ccf_clk_disable, \ + .of_xlate = _name##_of_xlate, \ +} + +/** + * SAMSUNG_CLK_OPS - Define clock operations structure for specified CMU. + * @name: name of generated structure + * @cmu: CMU index + * + * Like ccf_clk_ops, but with custom .of_xlate callback. + */ +#define SAMSUNG_CLK_OPS(name, cmu) _SAMSUNG_CLK_OPS(name, cmu) + +/** + * SAMSUNG_TO_CLK_ID - Calculate a global clock index. + * @_cmu: CMU index + * @_id: local clock index (unique across @_cmu) + * + * Return: A global clock index unique across all CMUs. + * Keeps a range of 256 available clocks for every CMU. + */ +#define SAMSUNG_TO_CLK_ID(_cmu, _id) (((_cmu) << 8) | ((_id) & 0xff)) + /** * struct samsung_mux_clock - information about mux clock * @id: platform specific id of the clock @@ -179,29 +224,14 @@ struct samsung_clk_group { unsigned int nr_clk; }; -void samsung_clk_register_mux(void __iomem *base, - const struct samsung_mux_clock *clk_list, - unsigned int nr_clk); -void samsung_clk_register_div(void __iomem *base, - const struct samsung_div_clock *clk_list, - unsigned int nr_clk); -void samsung_clk_register_gate(void __iomem *base, - const struct samsung_gate_clock *clk_list, - unsigned int nr_clk); -void samsung_clk_register_pll(void __iomem *base, - const struct samsung_pll_clock *clk_list, - unsigned int nr_clk); - -void samsung_cmu_register_clocks(void __iomem *base, - const struct samsung_clk_group *clk_groups, - unsigned int nr_groups); -int samsung_cmu_register_one(struct udevice *dev, +int samsung_cmu_register_one(struct udevice *dev, unsigned int cmu_id, const struct samsung_clk_group *clk_groups, unsigned int nr_groups); /** * samsung_register_cmu - Register CMU clocks ensuring parent CMU is present * @dev: CMU device + * @cmu_id: CMU index number * @clk_groups: list of CMU clock groups * @parent_drv: name of parent CMU driver * @@ -210,7 +240,7 @@ int samsung_cmu_register_one(struct udevice *dev, * * Return: 0 on success or negative value on error. */ -#define samsung_register_cmu(dev, clk_groups, parent_drv) \ +#define samsung_register_cmu(dev, cmu_id, clk_groups, parent_drv) \ ({ \ struct udevice *__parent; \ int __ret; \ @@ -220,8 +250,8 @@ int samsung_cmu_register_one(struct udevice *dev, if (__ret || !__parent) \ __ret = -ENOENT; \ else \ - __ret = samsung_cmu_register_one(dev, clk_groups, \ - ARRAY_SIZE(clk_groups)); \ + __ret = samsung_cmu_register_one(dev, cmu_id, \ + clk_groups, ARRAY_SIZE(clk_groups)); \ __ret; \ }) diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 0df0d1881a4..8dae635ac2c 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -2,7 +2,7 @@ if ARCH_SNAPDRAGON || ARCH_IPQ40XX config CLK_QCOM bool - depends on CLK && DM_RESET + depends on CLK && DM_RESET && POWER_DOMAIN def_bool n menu "Qualcomm clock drivers" diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c index e6647f7c41d..5a5868169c8 100644 --- a/drivers/clk/qcom/clock-apq8016.c +++ b/drivers/clk/qcom/clock-apq8016.c @@ -23,11 +23,7 @@ #define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004) #define SDCC_BCR(n) ((n * 0x1000) + 0x41000) -#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004) -#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008) -#define SDCC_M(n) ((n * 0x1000) + 0x4100C) -#define SDCC_N(n) ((n * 0x1000) + 0x41010) -#define SDCC_D(n) ((n * 0x1000) + 0x41014) +#define SDCC_CMD_RCGR(n) (((n + 1) * 0x1000) + 0x41004) #define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018) #define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C) @@ -38,31 +34,10 @@ #define BLSP1_UART2_BCR (0x3028) #define BLSP1_UART2_APPS_CBCR (0x302C) #define BLSP1_UART2_APPS_CMD_RCGR (0x3034) -#define BLSP1_UART2_APPS_CFG_RCGR (0x3038) -#define BLSP1_UART2_APPS_M (0x303C) -#define BLSP1_UART2_APPS_N (0x3040) -#define BLSP1_UART2_APPS_D (0x3044) /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(17) -static const struct bcr_regs sdc_regs[] = { - { - .cfg_rcgr = SDCC_CFG_RCGR(1), - .cmd_rcgr = SDCC_CMD_RCGR(1), - .M = SDCC_M(1), - .N = SDCC_N(1), - .D = SDCC_D(1), - }, - { - .cfg_rcgr = SDCC_CFG_RCGR(2), - .cmd_rcgr = SDCC_CMD_RCGR(2), - .M = SDCC_M(2), - .N = SDCC_N(2), - .D = SDCC_D(2), - } -}; - static struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, @@ -86,7 +61,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) clk_enable_cbc(priv->base + SDCC_AHB_CBCR(slot)); /* 800Mhz/div, gpll0 */ - clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0, + clk_rcg_set_rate_mnd(priv->base, SDCC_CMD_RCGR(slot), div, 0, 0, CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot)); @@ -94,14 +69,6 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) return rate; } -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR, - .cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR, - .M = BLSP1_UART2_APPS_M, - .N = BLSP1_UART2_APPS_N, - .D = BLSP1_UART2_APPS_D, -}; - /* UART: 115200 */ int apq8016_clk_init_uart(phys_addr_t base) { @@ -109,7 +76,7 @@ int apq8016_clk_init_uart(phys_addr_t base) clk_enable_vote_clk(base, &gcc_blsp1_ahb_clk); /* 7372800 uart block clock @ GPLL0 */ - clk_rcg_set_rate_mnd(base, &uart2_regs, 1, 144, 15625, + clk_rcg_set_rate_mnd(base, BLSP1_UART2_APPS_CMD_RCGR, 1, 144, 15625, CFG_CLK_SRC_GPLL0, 16); /* Vote for gpll0 clock */ diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c index a4731613c5e..479f9771a46 100644 --- a/drivers/clk/qcom/clock-apq8096.c +++ b/drivers/clk/qcom/clock-apq8096.c @@ -26,31 +26,15 @@ #define SDCC2_APPS_CBCR (0x14004) /* branch control */ #define SDCC2_AHB_CBCR (0x14008) #define SDCC2_CMD_RCGR (0x14010) -#define SDCC2_CFG_RCGR (0x14014) -#define SDCC2_M (0x14018) -#define SDCC2_N (0x1401C) -#define SDCC2_D (0x14020) #define BLSP2_AHB_CBCR (0x25004) #define BLSP2_UART2_APPS_CBCR (0x29004) #define BLSP2_UART2_APPS_CMD_RCGR (0x2900C) -#define BLSP2_UART2_APPS_CFG_RCGR (0x29010) -#define BLSP2_UART2_APPS_M (0x29014) -#define BLSP2_UART2_APPS_N (0x29018) -#define BLSP2_UART2_APPS_D (0x2901C) /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(30) #define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0) -static const struct bcr_regs sdc_regs = { - .cfg_rcgr = SDCC2_CFG_RCGR, - .cmd_rcgr = SDCC2_CMD_RCGR, - .M = SDCC2_M, - .N = SDCC2_N, - .D = SDCC2_D, -}; - static const struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, @@ -69,7 +53,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, uint rate) int div = 5; clk_enable_cbc(priv->base + SDCC2_AHB_CBCR); - clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0, + clk_rcg_set_rate_mnd(priv->base, SDCC2_CMD_RCGR, div, 0, 0, CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC2_APPS_CBCR); @@ -77,21 +61,13 @@ static int clk_init_sdc(struct msm_clk_priv *priv, uint rate) return rate; } -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = BLSP2_UART2_APPS_CFG_RCGR, - .cmd_rcgr = BLSP2_UART2_APPS_CMD_RCGR, - .M = BLSP2_UART2_APPS_M, - .N = BLSP2_UART2_APPS_N, - .D = BLSP2_UART2_APPS_D, -}; - static int clk_init_uart(struct msm_clk_priv *priv) { /* Enable AHB clock */ clk_enable_vote_clk(priv->base, &gcc_blsp2_ahb_clk); /* 7372800 uart block clock @ GPLL0 */ - clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 192, 15625, + clk_rcg_set_rate_mnd(priv->base, BLSP2_UART2_APPS_CMD_RCGR, 1, 192, 15625, CFG_CLK_SRC_GPLL0, 16); /* Vote for gpll0 clock */ diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c index 7c683e51922..05e5ab7d094 100644 --- a/drivers/clk/qcom/clock-qcom.c +++ b/drivers/clk/qcom/clock-qcom.c @@ -22,7 +22,9 @@ #include <linux/bug.h> #include <linux/delay.h> #include <linux/bitops.h> +#include <linux/iopoll.h> #include <reset-uclass.h> +#include <power-domain-uclass.h> #include "clock-qcom.h" @@ -30,6 +32,13 @@ #define CBCR_BRANCH_ENABLE_BIT BIT(0) #define CBCR_BRANCH_OFF_BIT BIT(31) +#define GDSC_SW_COLLAPSE_MASK BIT(0) +#define GDSC_POWER_DOWN_COMPLETE BIT(15) +#define GDSC_POWER_UP_COMPLETE BIT(16) +#define GDSC_PWR_ON_MASK BIT(31) +#define CFG_GDSCR_OFFSET 0x4 +#define GDSC_STATUS_POLL_TIMEOUT_US 1500 + /* Enable clock controlled by CBC soft macro */ void clk_enable_cbc(phys_addr_t cbcr) { @@ -95,7 +104,7 @@ void clk_bcr_update(phys_addr_t apps_cmd_rcgr) * root set rate for clocks with half integer and MND divider * div should be pre-calculated ((div * 2) - 1) */ -void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, +void clk_rcg_set_rate_mnd(phys_addr_t base, uint32_t cmd_rcgr, int div, int m, int n, int source, u8 mnd_width) { u32 cfg; @@ -111,13 +120,14 @@ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, debug("m %#x n %#x d %#x div %#x mask %#x\n", m_val, n_val, d_val, div, mask); /* Program MND values */ - writel(m_val & mask, base + regs->M); - writel(n_val & mask, base + regs->N); - writel(d_val & mask, base + regs->D); + writel(m_val & mask, base + cmd_rcgr + RCG_M_REG); + writel(n_val & mask, base + cmd_rcgr + RCG_N_REG); + writel(d_val & mask, base + cmd_rcgr + RCG_D_REG); /* setup src select and divider */ - cfg = readl(base + regs->cfg_rcgr); - cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK); + cfg = readl(base + cmd_rcgr + RCG_CFG_REG); + cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK | + CFG_SRC_DIV_MASK); cfg |= source & CFG_SRC_SEL_MASK; /* Select clock source */ if (div) @@ -126,20 +136,20 @@ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, if (n && n != m) cfg |= CFG_MODE_DUAL_EDGE; - writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */ + writel(cfg, base + cmd_rcgr + RCG_CFG_REG); /* Write new clock configuration */ /* Inform h/w to start using the new config. */ - clk_bcr_update(base + regs->cmd_rcgr); + clk_bcr_update(base + cmd_rcgr); } /* root set rate for clocks with half integer and mnd_width=0 */ -void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, +void clk_rcg_set_rate(phys_addr_t base, uint32_t cmd_rcgr, int div, int source) { u32 cfg; /* setup src select and divider */ - cfg = readl(base + regs->cfg_rcgr); + cfg = readl(base + cmd_rcgr + RCG_CFG_REG); cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK); cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */ @@ -150,10 +160,10 @@ void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, if (div) cfg |= (2 * div - 1) & CFG_SRC_DIV_MASK; - writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */ + writel(cfg, base + cmd_rcgr + RCG_CFG_REG); /* Write new clock configuration */ /* Inform h/w to start using the new config. */ - clk_bcr_update(base + regs->cmd_rcgr); + clk_bcr_update(base + cmd_rcgr); } const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate) @@ -217,12 +227,13 @@ U_BOOT_DRIVER(qcom_clk) = { .ops = &msm_clk_ops, .priv_auto = sizeof(struct msm_clk_priv), .probe = msm_clk_probe, + .flags = DM_FLAG_PRE_RELOC | DM_FLAG_DEFAULT_PD_CTRL_OFF, }; int qcom_cc_bind(struct udevice *parent) { struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(parent); - struct udevice *clkdev, *rstdev; + struct udevice *clkdev = NULL, *rstdev = NULL, *pwrdev; struct driver *drv; int ret; @@ -237,20 +248,41 @@ int qcom_cc_bind(struct udevice *parent) if (ret) return ret; - /* Bail out early if resets are not specified for this platform */ - if (!data->resets) - return ret; + if (data->resets) { + /* Get a handle to the common reset handler */ + drv = lists_driver_lookup_name("qcom_reset"); + if (!drv) { + ret = -ENOENT; + goto unbind_clkdev; + } + + /* Register the reset controller */ + ret = device_bind_with_driver_data(parent, drv, "qcom_reset", (ulong)data, + dev_ofnode(parent), &rstdev); + if (ret) + goto unbind_clkdev; + } - /* Get a handle to the common reset handler */ - drv = lists_driver_lookup_name("qcom_reset"); - if (!drv) - return -ENOENT; + if (data->power_domains) { + /* Get a handle to the common power domain handler */ + drv = lists_driver_lookup_name("qcom_power"); + if (!drv) { + ret = -ENOENT; + goto unbind_rstdev; + } + /* Register the power domain controller */ + ret = device_bind_with_driver_data(parent, drv, "qcom_power", (ulong)data, + dev_ofnode(parent), &pwrdev); + if (ret) + goto unbind_rstdev; + } - /* Register the reset controller */ - ret = device_bind_with_driver_data(parent, drv, "qcom_reset", (ulong)data, - dev_ofnode(parent), &rstdev); - if (ret) - device_unbind(clkdev); + return 0; + +unbind_rstdev: + device_unbind(rstdev); +unbind_clkdev: + device_unbind(clkdev); return ret; } @@ -305,3 +337,80 @@ U_BOOT_DRIVER(qcom_reset) = { .ops = &qcom_reset_ops, .probe = qcom_reset_probe, }; + +static int qcom_power_set(struct power_domain *pwr, bool on) +{ + struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(pwr->dev); + void __iomem *base = dev_get_priv(pwr->dev); + const struct qcom_power_map *map; + u32 value; + int ret; + + if (pwr->id >= data->num_power_domains) + return -ENODEV; + + map = &data->power_domains[pwr->id]; + + if (!map->reg) + return -ENODEV; + + value = readl(base + map->reg); + + if (on) + value &= ~GDSC_SW_COLLAPSE_MASK; + else + value |= GDSC_SW_COLLAPSE_MASK; + + writel(value, base + map->reg); + + if (on) + ret = readl_poll_timeout(base + map->reg + CFG_GDSCR_OFFSET, + value, + (value & GDSC_POWER_UP_COMPLETE) || + (value & GDSC_PWR_ON_MASK), + GDSC_STATUS_POLL_TIMEOUT_US); + + else + ret = readl_poll_timeout(base + map->reg + CFG_GDSCR_OFFSET, + value, + (value & GDSC_POWER_DOWN_COMPLETE) || + !(value & GDSC_PWR_ON_MASK), + GDSC_STATUS_POLL_TIMEOUT_US); + + + if (ret == -ETIMEDOUT) + printf("WARNING: GDSC %lu is stuck during power on/off\n", + pwr->id); + return ret; +} + +static int qcom_power_on(struct power_domain *pwr) +{ + return qcom_power_set(pwr, true); +} + +static int qcom_power_off(struct power_domain *pwr) +{ + return qcom_power_set(pwr, false); +} + +static const struct power_domain_ops qcom_power_ops = { + .on = qcom_power_on, + .off = qcom_power_off, +}; + +static int qcom_power_probe(struct udevice *dev) +{ + /* Set our priv pointer to the base address */ + dev_set_priv(dev, (void *)dev_read_addr(dev)); + + return 0; +} + +U_BOOT_DRIVER(qcom_power) = { + .name = "qcom_power", + .id = UCLASS_POWER_DOMAIN, + .ops = &qcom_power_ops, + .probe = qcom_power_probe, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h index 01088c19015..a7f833a4b6d 100644 --- a/drivers/clk/qcom/clock-qcom.h +++ b/drivers/clk/qcom/clock-qcom.h @@ -12,6 +12,11 @@ #define CFG_CLK_SRC_GPLL0_EVEN (6 << 8) #define CFG_CLK_SRC_MASK (7 << 8) +#define RCG_CFG_REG 0x4 +#define RCG_M_REG 0x8 +#define RCG_N_REG 0xc +#define RCG_D_REG 0x10 + struct pll_vote_clk { uintptr_t status; int status_bit; @@ -24,13 +29,6 @@ struct vote_clk { uintptr_t ena_vote; int vote_bit; }; -struct bcr_regs { - uintptr_t cfg_rcgr; - uintptr_t cmd_rcgr; - uintptr_t M; - uintptr_t N; - uintptr_t D; -}; struct freq_tbl { uint freq; @@ -59,9 +57,15 @@ struct qcom_reset_map { u8 bit; }; +struct qcom_power_map { + unsigned int reg; +}; + struct clk; struct msm_clk_data { + const struct qcom_power_map *power_domains; + unsigned long num_power_domains; const struct qcom_reset_map *resets; unsigned long num_resets; const struct gate_clk *clks; @@ -82,9 +86,9 @@ void clk_bcr_update(phys_addr_t apps_cmd_rgcr); void clk_enable_cbc(phys_addr_t cbcr); void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk); const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate); -void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, +void clk_rcg_set_rate_mnd(phys_addr_t base, uint32_t cmd_rcgr, int div, int m, int n, int source, u8 mnd_width); -void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, +void clk_rcg_set_rate(phys_addr_t base, uint32_t cmd_rcgr, int div, int source); static inline void qcom_gate_clk_en(const struct msm_clk_priv *priv, unsigned long id) diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c index 958312b8884..8a897a52bc0 100644 --- a/drivers/clk/qcom/clock-qcs404.c +++ b/drivers/clk/qcom/clock-qcs404.c @@ -28,35 +28,22 @@ #define BLSP1_UART2_BCR (0x3028) #define BLSP1_UART2_APPS_CBCR (0x302C) #define BLSP1_UART2_APPS_CMD_RCGR (0x3034) -#define BLSP1_UART2_APPS_CFG_RCGR (0x3038) -#define BLSP1_UART2_APPS_M (0x303C) -#define BLSP1_UART2_APPS_N (0x3040) -#define BLSP1_UART2_APPS_D (0x3044) /* I2C controller clock control registerss */ #define BLSP1_QUP0_I2C_APPS_CBCR (0x6028) #define BLSP1_QUP0_I2C_APPS_CMD_RCGR (0x602C) -#define BLSP1_QUP0_I2C_APPS_CFG_RCGR (0x6030) #define BLSP1_QUP1_I2C_APPS_CBCR (0x2008) #define BLSP1_QUP1_I2C_APPS_CMD_RCGR (0x200C) -#define BLSP1_QUP1_I2C_APPS_CFG_RCGR (0x2010) #define BLSP1_QUP2_I2C_APPS_CBCR (0x3010) #define BLSP1_QUP2_I2C_APPS_CMD_RCGR (0x3000) -#define BLSP1_QUP2_I2C_APPS_CFG_RCGR (0x3004) #define BLSP1_QUP3_I2C_APPS_CBCR (0x4020) #define BLSP1_QUP3_I2C_APPS_CMD_RCGR (0x4000) -#define BLSP1_QUP3_I2C_APPS_CFG_RCGR (0x4004) #define BLSP1_QUP4_I2C_APPS_CBCR (0x5020) #define BLSP1_QUP4_I2C_APPS_CMD_RCGR (0x5000) -#define BLSP1_QUP4_I2C_APPS_CFG_RCGR (0x5004) /* SD controller clock control registers */ #define SDCC_BCR(n) (((n) * 0x1000) + 0x41000) -#define SDCC_CMD_RCGR(n) (((n) * 0x1000) + 0x41004) -#define SDCC_CFG_RCGR(n) (((n) * 0x1000) + 0x41008) -#define SDCC_M(n) (((n) * 0x1000) + 0x4100C) -#define SDCC_N(n) (((n) * 0x1000) + 0x41010) -#define SDCC_D(n) (((n) * 0x1000) + 0x41014) +#define SDCC_CMD_RCGR(n) (((n + 1) * 0x1000) + 0x41004) #define SDCC_APPS_CBCR(n) (((n) * 0x1000) + 0x41018) #define SDCC_AHB_CBCR(n) (((n) * 0x1000) + 0x4101C) @@ -70,10 +57,6 @@ #define USB30_MOCK_UTMI_CMD_RCGR (0x3901C) #define USB30_MOCK_UTMI_CFG_RCGR (0x39020) #define USB30_MASTER_CMD_RCGR (0x39028) -#define USB30_MASTER_CFG_RCGR (0x3902C) -#define USB30_MASTER_M (0x39030) -#define USB30_MASTER_N (0x39034) -#define USB30_MASTER_D (0x39038) #define USB2A_PHY_SLEEP_CBCR (0x4102C) #define USB_HS_PHY_CFG_AHB_CBCR (0x41030) @@ -83,12 +66,7 @@ #define ETH_SLAVE_AHB_CBCR (0x4e00c) #define ETH_AXI_CBCR (0x4e010) #define EMAC_PTP_CMD_RCGR (0x4e014) -#define EMAC_PTP_CFG_RCGR (0x4e018) #define EMAC_CMD_RCGR (0x4e01c) -#define EMAC_CFG_RCGR (0x4e020) -#define EMAC_M (0x4e024) -#define EMAC_N (0x4e028) -#define EMAC_D (0x4e02c) /* GPLL0 clock control registers */ @@ -103,22 +81,6 @@ static struct vote_clk gcc_blsp1_ahb_clk = { .vote_bit = BIT(10) | BIT(5) | BIT(4), }; -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR, - .cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR, - .M = BLSP1_UART2_APPS_M, - .N = BLSP1_UART2_APPS_N, - .D = BLSP1_UART2_APPS_D, -}; - -static const struct bcr_regs sdc_regs = { - .cfg_rcgr = SDCC_CFG_RCGR(1), - .cmd_rcgr = SDCC_CMD_RCGR(1), - .M = SDCC_M(1), - .N = SDCC_N(1), - .D = SDCC_D(1), -}; - static struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, @@ -133,60 +95,6 @@ static struct pll_vote_clk gpll1_vote_clk = { .vote_bit = BIT(1), }; -static const struct bcr_regs usb30_master_regs = { - .cfg_rcgr = USB30_MASTER_CFG_RCGR, - .cmd_rcgr = USB30_MASTER_CMD_RCGR, - .M = USB30_MASTER_M, - .N = USB30_MASTER_N, - .D = USB30_MASTER_D, -}; - -static const struct bcr_regs emac_regs = { - .cfg_rcgr = EMAC_CFG_RCGR, - .cmd_rcgr = EMAC_CMD_RCGR, - .M = EMAC_M, - .N = EMAC_N, - .D = EMAC_D, -}; - -static const struct bcr_regs emac_ptp_regs = { - .cfg_rcgr = EMAC_PTP_CFG_RCGR, - .cmd_rcgr = EMAC_PTP_CMD_RCGR, - .M = EMAC_M, - .N = EMAC_N, - .D = EMAC_D, -}; - -static const struct bcr_regs blsp1_qup0_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP0_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP0_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup1_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP1_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP1_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup2_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP2_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP2_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup3_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP3_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP3_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup4_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP4_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP4_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate) { struct msm_clk_priv *priv = dev_get_priv(clk->dev); @@ -194,29 +102,29 @@ static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate) switch (clk->id) { case GCC_BLSP1_UART2_APPS_CLK: /* UART: 1843200Hz for a fixed 115200 baudrate (19200000 * (12/125)) */ - clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 0, 12, 125, + clk_rcg_set_rate_mnd(priv->base, BLSP1_UART2_APPS_CMD_RCGR, 0, 12, 125, CFG_CLK_SRC_CXO, 16); clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR); return 1843200; case GCC_SDCC1_APPS_CLK: /* SDCC1: 200MHz */ - clk_rcg_set_rate_mnd(priv->base, &sdc_regs, 7, 0, 0, + clk_rcg_set_rate_mnd(priv->base, SDCC_CMD_RCGR(0), 7, 0, 0, CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC_APPS_CBCR(1)); return rate; case GCC_ETH_RGMII_CLK: if (rate == 250000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 0, 0, CFG_CLK_SRC_GPLL1, 8); else if (rate == 125000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 7, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 7, 0, 0, CFG_CLK_SRC_GPLL1, 8); else if (rate == 50000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 19, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 19, 0, 0, CFG_CLK_SRC_GPLL1, 8); else if (rate == 5000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 1, 50, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 1, 50, CFG_CLK_SRC_GPLL1, 8); return rate; } @@ -237,7 +145,7 @@ static int qcs404_clk_enable(struct clk *clk) switch (clk->id) { case GCC_USB30_MASTER_CLK: clk_enable_cbc(priv->base + USB30_MASTER_CBCR); - clk_rcg_set_rate_mnd(priv->base, &usb30_master_regs, 7, 0, 0, + clk_rcg_set_rate_mnd(priv->base, USB30_MASTER_CMD_RCGR, 7, 0, 0, CFG_CLK_SRC_GPLL0, 8); break; case GCC_SYS_NOC_USB3_CLK: @@ -259,14 +167,14 @@ static int qcs404_clk_enable(struct clk *clk) /* SPEED_1000: freq -> 250MHz */ clk_enable_cbc(priv->base + ETH_PTP_CBCR); clk_enable_gpll0(priv->base, &gpll1_vote_clk); - clk_rcg_set_rate_mnd(priv->base, &emac_ptp_regs, 3, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_PTP_CMD_RCGR, 3, 0, 0, CFG_CLK_SRC_GPLL1, 8); break; case GCC_ETH_RGMII_CLK: /* SPEED_1000: freq -> 250MHz */ clk_enable_cbc(priv->base + ETH_RGMII_CBCR); clk_enable_gpll0(priv->base, &gpll1_vote_clk); - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 0, 0, CFG_CLK_SRC_GPLL1, 8); break; case GCC_ETH_SLAVE_AHB_CLK: @@ -280,27 +188,27 @@ static int qcs404_clk_enable(struct clk *clk) break; case GCC_BLSP1_QUP0_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP0_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup0_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP0_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP1_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP1_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup1_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP1_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP2_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP2_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup2_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP2_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP3_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP3_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup3_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP3_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP4_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP4_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup4_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP4_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_SDCC1_AHB_CLK: diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c index 36ffee79d96..e9c61eb480d 100644 --- a/drivers/clk/qcom/clock-sdm845.c +++ b/drivers/clk/qcom/clock-sdm845.c @@ -19,13 +19,11 @@ #include "clock-qcom.h" -#define SE9_AHB_CBCR 0x25004 -#define SE9_UART_APPS_CBCR 0x29004 #define SE9_UART_APPS_CMD_RCGR 0x18148 -#define SE9_UART_APPS_CFG_RCGR 0x1814C -#define SE9_UART_APPS_M 0x18150 -#define SE9_UART_APPS_N 0x18154 -#define SE9_UART_APPS_D 0x18158 + +#define USB30_PRIM_MASTER_CLK_CMD_RCGR 0xf018 +#define USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR 0xf030 +#define USB3_PRIM_PHY_AUX_CMD_RCGR 0xf05c static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625), @@ -46,14 +44,6 @@ static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { { } }; -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = SE9_UART_APPS_CFG_RCGR, - .cmd_rcgr = SE9_UART_APPS_CMD_RCGR, - .M = SE9_UART_APPS_M, - .N = SE9_UART_APPS_N, - .D = SE9_UART_APPS_D, -}; - static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate) { struct msm_clk_priv *priv = dev_get_priv(clk->dev); @@ -62,7 +52,7 @@ static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate) switch (clk->id) { case GCC_QUPV3_WRAP1_S1_CLK: /* UART9 */ freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate); - clk_rcg_set_rate_mnd(priv->base, &uart2_regs, + clk_rcg_set_rate_mnd(priv->base, SE9_UART_APPS_CMD_RCGR, freq->pre_div, freq->m, freq->n, freq->src, 16); return freq->freq; default: @@ -71,6 +61,8 @@ static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate) } static const struct gate_clk sdm845_clks[] = { + GATE_CLK(GCC_AGGRE_USB3_SEC_AXI_CLK, 0x82020, 0x00000001), + GATE_CLK(GCC_CFG_NOC_USB3_SEC_AXI_CLK, 0x05030, 0x00000001), GATE_CLK(GCC_QUPV3_WRAP0_S0_CLK, 0x5200c, 0x00000400), GATE_CLK(GCC_QUPV3_WRAP0_S1_CLK, 0x5200c, 0x00000800), GATE_CLK(GCC_QUPV3_WRAP0_S2_CLK, 0x5200c, 0x00001000), @@ -135,6 +127,25 @@ static int sdm845_clk_enable(struct clk *clk) debug("%s: clk %s\n", __func__, sdm845_clks[clk->id].name); + switch (clk->id) { + case GCC_USB30_PRIM_MASTER_CLK: + qcom_gate_clk_en(priv, GCC_USB_PHY_CFG_AHB2PHY_CLK); + /* These numbers are just pulled from the frequency tables in the Linux driver */ + clk_rcg_set_rate_mnd(priv->base, USB30_PRIM_MASTER_CLK_CMD_RCGR, + (4.5 * 2) - 1, 0, 0, 1 << 8, 8); + clk_rcg_set_rate_mnd(priv->base, USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR, + 1, 0, 0, 0, 8); + clk_rcg_set_rate_mnd(priv->base, USB3_PRIM_PHY_AUX_CMD_RCGR, + 1, 0, 0, 0, 8); + break; + case GCC_USB30_SEC_MASTER_CLK: + qcom_gate_clk_en(priv, GCC_USB3_SEC_PHY_AUX_CLK); + + qcom_gate_clk_en(priv, GCC_USB3_SEC_CLKREF_CLK); + qcom_gate_clk_en(priv, GCC_USB3_SEC_PHY_COM_AUX_CLK); + break; + } + qcom_gate_clk_en(priv, clk->id); return 0; @@ -160,11 +171,29 @@ static const struct qcom_reset_map sdm845_gcc_resets[] = { [GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 }, }; +static const struct qcom_power_map sdm845_gdscs[] = { + [PCIE_0_GDSC] = { 0x6b004 }, + [PCIE_1_GDSC] = { 0x8d004 }, + [UFS_CARD_GDSC] = { 0x75004 }, + [UFS_PHY_GDSC] = { 0x77004 }, + [USB30_PRIM_GDSC] = { 0xf004 }, + [USB30_SEC_GDSC] = { 0x10004 }, + [HLOS1_VOTE_AGGRE_NOC_MMU_AUDIO_TBU_GDSC] = { 0x7d030 }, + [HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC] = { 0x7d03c }, + [HLOS1_VOTE_AGGRE_NOC_MMU_TBU1_GDSC] = { 0x7d034 }, + [HLOS1_VOTE_AGGRE_NOC_MMU_TBU2_GDSC] = { 0x7d038 }, + [HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC] = { 0x7d040 }, + [HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC] = { 0x7d048 }, + [HLOS1_VOTE_MMNOC_MMU_TBU_SF_GDSC] = { 0x7d044 }, +}; + static struct msm_clk_data sdm845_clk_data = { .resets = sdm845_gcc_resets, .num_resets = ARRAY_SIZE(sdm845_gcc_resets), .clks = sdm845_clks, .num_clks = ARRAY_SIZE(sdm845_clks), + .power_domains = sdm845_gdscs, + .num_power_domains = ARRAY_SIZE(sdm845_gdscs), .enable = sdm845_clk_enable, .set_rate = sdm845_clk_set_rate, @@ -183,5 +212,5 @@ U_BOOT_DRIVER(gcc_sdm845) = { .id = UCLASS_NOP, .of_match = gcc_sdm845_of_match, .bind = qcom_cc_bind, - .flags = DM_FLAG_PRE_RELOC, + .flags = DM_FLAG_PRE_RELOC | DM_FLAG_DEFAULT_PD_CTRL_OFF, }; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index a7fb1eb3f4c..b050585389b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -665,13 +665,6 @@ config SLG7XL45106_I2C_GPO 8-bit gpo expander, all gpo lines are controlled by writing value into data register. -config TURRIS_OMNIA_MCU - bool "Turris Omnia MCU GPIO driver" - depends on DM_GPIO - default y if TARGET_TURRIS_OMNIA - help - Support for GPIOs on MCU connected to Turris Omnia via i2c. - config FTGPIO010 bool "Faraday Technology FTGPIO010 driver" depends on DM_GPIO diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 90711702a69..4a293154350 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -73,7 +73,6 @@ obj-$(CONFIG_$(SPL_)MAX77663_GPIO) += max77663_gpio.o obj-$(CONFIG_SL28CPLD_GPIO) += sl28cpld-gpio.o obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN) += zynqmp_gpio_modepin.o obj-$(CONFIG_SLG7XL45106_I2C_GPO) += gpio_slg7xl45106.o -obj-$(CONFIG_$(SPL_TPL_)TURRIS_OMNIA_MCU) += turris_omnia_mcu.o obj-$(CONFIG_FTGPIO010) += ftgpio010.o obj-$(CONFIG_ADP5585_GPIO) += adp5585_gpio.o obj-$(CONFIG_RZG2L_GPIO) += rzg2l-gpio.o diff --git a/drivers/gpio/msm_gpio.c b/drivers/gpio/msm_gpio.c index 5e57b0cbde7..f5d9ab54e81 100644 --- a/drivers/gpio/msm_gpio.c +++ b/drivers/gpio/msm_gpio.c @@ -35,19 +35,19 @@ struct msm_gpio_bank { #define GPIO_IN_OUT_REG(dev, x) \ (GPIO_CONFIG_REG(dev, x) + 0x4) -static int msm_gpio_direction_input(struct udevice *dev, unsigned int gpio) +static void msm_gpio_direction_input(struct udevice *dev, unsigned int gpio) { struct msm_gpio_bank *priv = dev_get_priv(dev); /* Always NOP for special pins, assume they're in the correct state */ if (qcom_is_special_pin(priv->pin_data, gpio)) - return 0; + return; /* Disable OE bit */ clrsetbits_le32(priv->base + GPIO_CONFIG_REG(dev, gpio), GPIO_OE_MASK, GPIO_OE_DISABLE); - return 0; + return; } static int msm_gpio_set_value(struct udevice *dev, unsigned int gpio, int value) @@ -84,6 +84,23 @@ static int msm_gpio_direction_output(struct udevice *dev, unsigned int gpio, return 0; } +static int msm_gpio_set_flags(struct udevice *dev, unsigned int gpio, ulong flags) +{ + if (flags & GPIOD_IS_OUT_ACTIVE) { + return msm_gpio_direction_output(dev, gpio, 1); + } else if (flags & GPIOD_IS_OUT) { + return msm_gpio_direction_output(dev, gpio, 0); + } else if (flags & GPIOD_IS_IN) { + msm_gpio_direction_input(dev, gpio); + if (flags & GPIOD_PULL_UP) + return msm_gpio_set_value(dev, gpio, 1); + else if (flags & GPIOD_PULL_DOWN) + return msm_gpio_set_value(dev, gpio, 0); + } + + return 0; +} + static int msm_gpio_get_value(struct udevice *dev, unsigned int gpio) { struct msm_gpio_bank *priv = dev_get_priv(dev); @@ -110,10 +127,8 @@ static int msm_gpio_get_function(struct udevice *dev, unsigned int gpio) } static const struct dm_gpio_ops gpio_msm_ops = { - .direction_input = msm_gpio_direction_input, - .direction_output = msm_gpio_direction_output, + .set_flags = msm_gpio_set_flags, .get_value = msm_gpio_get_value, - .set_value = msm_gpio_set_value, .get_function = msm_gpio_get_function, }; diff --git a/drivers/gpio/turris_omnia_mcu.c b/drivers/gpio/turris_omnia_mcu.c deleted file mode 100644 index 2d2bf2d1dd6..00000000000 --- a/drivers/gpio/turris_omnia_mcu.c +++ /dev/null @@ -1,316 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// (C) 2022 Pali Rohár <pali@kernel.org> - -#include <common.h> -#include <dm.h> -#include <i2c.h> -#include <asm/gpio.h> -#include <linux/log2.h> - -enum commands_e { - CMD_GET_STATUS_WORD = 0x01, - CMD_GENERAL_CONTROL = 0x02, - - /* available if STS_FEATURES_SUPPORTED bit set in status word */ - CMD_GET_FEATURES = 0x10, - - /* available if FEAT_EXT_CMDS bit is set in features */ - CMD_GET_EXT_STATUS_DWORD = 0x11, - - /* available if FEAT_EXT_CMDS and FEAT_PERIPH_MCU bits are set in featurs */ - CMD_EXT_CONTROL = 0x12, - CMD_GET_EXT_CONTROL_STATUS = 0x13, -}; - -/* CMD_GET_STATUS_WORD */ -enum sts_word_e { - STS_MCU_TYPE_MASK = GENMASK(1, 0), - STS_MCU_TYPE_STM32 = 0, - STS_MCU_TYPE_GD32 = 1, - STS_MCU_TYPE_MKL = 2, - STS_FEATURES_SUPPORTED = BIT(2), - STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3), - STS_CARD_DET = BIT(4), - STS_MSATA_IND = BIT(5), - STS_USB30_OVC = BIT(6), - STS_USB31_OVC = BIT(7), - STS_USB30_PWRON = BIT(8), - STS_USB31_PWRON = BIT(9), - STS_ENABLE_4V5 = BIT(10), - STS_BUTTON_MODE = BIT(11), - STS_BUTTON_PRESSED = BIT(12), - STS_BUTTON_COUNTER_MASK = GENMASK(15, 13) -}; - -/* CMD_GENERAL_CONTROL */ -enum ctl_byte_e { - CTL_LIGHT_RST = BIT(0), - CTL_HARD_RST = BIT(1), - /*CTL_RESERVED = BIT(2),*/ - CTL_USB30_PWRON = BIT(3), - CTL_USB31_PWRON = BIT(4), - CTL_ENABLE_4V5 = BIT(5), - CTL_BUTTON_MODE = BIT(6), - CTL_BOOTLOADER = BIT(7) -}; - -/* CMD_GET_FEATURES */ -enum features_e { - FEAT_PERIPH_MCU = BIT(0), - FEAT_EXT_CMDS = BIT(1), -}; - -struct turris_omnia_mcu_info { - u16 features; -}; - -static int turris_omnia_mcu_get_function(struct udevice *dev, uint offset) -{ - struct turris_omnia_mcu_info *info = dev_get_plat(dev); - - switch (offset) { - /* bank 0 */ - case 0 ... 15: - switch (offset) { - case ilog2(STS_USB30_PWRON): - case ilog2(STS_USB31_PWRON): - case ilog2(STS_ENABLE_4V5): - case ilog2(STS_BUTTON_MODE): - return GPIOF_OUTPUT; - default: - return GPIOF_INPUT; - } - - /* bank 1 - supported only when FEAT_EXT_CMDS is set */ - case (16 + 0) ... (16 + 31): - if (!(info->features & FEAT_EXT_CMDS)) - return -EINVAL; - return GPIOF_INPUT; - - /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */ - case (16 + 32 + 0) ... (16 + 32 + 15): - if (!(info->features & FEAT_EXT_CMDS)) - return -EINVAL; - if (!(info->features & FEAT_PERIPH_MCU)) - return -EINVAL; - return GPIOF_OUTPUT; - - default: - return -EINVAL; - } -} - -static int turris_omnia_mcu_get_value(struct udevice *dev, uint offset) -{ - struct turris_omnia_mcu_info *info = dev_get_plat(dev); - u8 val16[2]; - u8 val32[4]; - int ret; - - switch (offset) { - /* bank 0 */ - case 0 ... 15: - ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, val16, 2); - if (ret) - return ret; - return ((((u16)val16[1] << 8) | val16[0]) >> offset) & 0x1; - - /* bank 1 - supported only when FEAT_EXT_CMDS is set */ - case (16 + 0) ... (16 + 31): - if (!(info->features & FEAT_EXT_CMDS)) - return -EINVAL; - ret = dm_i2c_read(dev, CMD_GET_EXT_STATUS_DWORD, val32, 4); - if (ret) - return ret; - return ((((u32)val32[3] << 24) | ((u32)val32[2] << 16) | - ((u32)val32[1] << 8) | val32[0]) >> (offset - 16)) & 0x1; - - /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */ - case (16 + 32 + 0) ... (16 + 32 + 15): - if (!(info->features & FEAT_EXT_CMDS)) - return -EINVAL; - if (!(info->features & FEAT_PERIPH_MCU)) - return -EINVAL; - ret = dm_i2c_read(dev, CMD_GET_EXT_CONTROL_STATUS, val16, 2); - if (ret) - return ret; - return ((((u16)val16[1] << 8) | val16[0]) >> (offset - 16 - 32)) & 0x1; - - default: - return -EINVAL; - } -} - -static int turris_omnia_mcu_set_value(struct udevice *dev, uint offset, int value) -{ - struct turris_omnia_mcu_info *info = dev_get_plat(dev); - u8 val16[2]; - u8 val32[4]; - - switch (offset) { - /* bank 0 */ - case 0 ... 15: - switch (offset) { - case ilog2(STS_USB30_PWRON): - val16[1] = CTL_USB30_PWRON; - break; - case ilog2(STS_USB31_PWRON): - val16[1] = CTL_USB31_PWRON; - break; - case ilog2(STS_ENABLE_4V5): - val16[1] = CTL_ENABLE_4V5; - break; - case ilog2(STS_BUTTON_MODE): - val16[1] = CTL_BUTTON_MODE; - break; - default: - return -EINVAL; - } - val16[0] = value ? val16[1] : 0; - return dm_i2c_write(dev, CMD_GENERAL_CONTROL, val16, sizeof(val16)); - - /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */ - case (16 + 32 + 0) ... (16 + 32 + 15): - if (!(info->features & FEAT_EXT_CMDS)) - return -EINVAL; - if (!(info->features & FEAT_PERIPH_MCU)) - return -EINVAL; - val32[3] = BIT(offset - 16 - 32) >> 8; - val32[2] = BIT(offset - 16 - 32) & 0xff; - val32[1] = value ? val32[3] : 0; - val32[0] = value ? val32[2] : 0; - return dm_i2c_write(dev, CMD_EXT_CONTROL, val32, sizeof(val32)); - - default: - return -EINVAL; - } -} - -static int turris_omnia_mcu_direction_input(struct udevice *dev, uint offset) -{ - int ret; - - ret = turris_omnia_mcu_get_function(dev, offset); - if (ret < 0) - return ret; - else if (ret != GPIOF_INPUT) - return -EOPNOTSUPP; - - return 0; -} - -static int turris_omnia_mcu_direction_output(struct udevice *dev, uint offset, int value) -{ - int ret; - - ret = turris_omnia_mcu_get_function(dev, offset); - if (ret < 0) - return ret; - else if (ret != GPIOF_OUTPUT) - return -EOPNOTSUPP; - - return turris_omnia_mcu_set_value(dev, offset, value); -} - -static int turris_omnia_mcu_xlate(struct udevice *dev, struct gpio_desc *desc, - struct ofnode_phandle_args *args) -{ - uint bank, gpio, flags, offset; - int ret; - - if (args->args_count != 3) - return -EINVAL; - - bank = args->args[0]; - gpio = args->args[1]; - flags = args->args[2]; - - switch (bank) { - case 0: - if (gpio >= 16) - return -EINVAL; - offset = gpio; - break; - case 1: - if (gpio >= 32) - return -EINVAL; - offset = 16 + gpio; - break; - case 2: - if (gpio >= 16) - return -EINVAL; - offset = 16 + 32 + gpio; - break; - default: - return -EINVAL; - } - - ret = turris_omnia_mcu_get_function(dev, offset); - if (ret < 0) - return ret; - - desc->offset = offset; - desc->flags = gpio_flags_xlate(flags); - - return 0; -} - -static const struct dm_gpio_ops turris_omnia_mcu_ops = { - .direction_input = turris_omnia_mcu_direction_input, - .direction_output = turris_omnia_mcu_direction_output, - .get_value = turris_omnia_mcu_get_value, - .set_value = turris_omnia_mcu_set_value, - .get_function = turris_omnia_mcu_get_function, - .xlate = turris_omnia_mcu_xlate, -}; - -static int turris_omnia_mcu_probe(struct udevice *dev) -{ - struct turris_omnia_mcu_info *info = dev_get_plat(dev); - struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); - u16 status; - u8 val[2]; - int ret; - - ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, val, 2); - if (ret) { - printf("Error: turris_omnia_mcu CMD_GET_STATUS_WORD failed: %d\n", ret); - return ret; - } - - status = ((u16)val[1] << 8) | val[0]; - - if (status & STS_FEATURES_SUPPORTED) { - ret = dm_i2c_read(dev, CMD_GET_FEATURES, val, 2); - if (ret) { - printf("Error: turris_omnia_mcu CMD_GET_FEATURES failed: %d\n", ret); - return ret; - } - info->features = ((u16)val[1] << 8) | val[0]; - } - - uc_priv->bank_name = "mcu_"; - - if ((info->features & FEAT_EXT_CMDS) && (info->features & FEAT_PERIPH_MCU)) - uc_priv->gpio_count = 16 + 32 + 16; - else if (info->features & FEAT_EXT_CMDS) - uc_priv->gpio_count = 16 + 32; - else - uc_priv->gpio_count = 16; - - return 0; -} - -static const struct udevice_id turris_omnia_mcu_ids[] = { - { .compatible = "cznic,turris-omnia-mcu" }, - { } -}; - -U_BOOT_DRIVER(turris_omnia_mcu) = { - .name = "turris-omnia-mcu", - .id = UCLASS_GPIO, - .ops = &turris_omnia_mcu_ops, - .probe = turris_omnia_mcu_probe, - .plat_auto = sizeof(struct turris_omnia_mcu_info), - .of_match = turris_omnia_mcu_ids, -}; diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 98043fc2ff3..6b06888454f 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -505,6 +505,17 @@ config TEST_DRV model. This should only be enabled for testing as it is not useful for anything else. +config TURRIS_OMNIA_MCU + bool "Enable Turris Omnia MCU driver" + depends on DM_I2C + depends on DM_GPIO + depends on DM_RNG + depends on SYSRESET + default y if TARGET_TURRIS_OMNIA + help + This enables support for Turris Omnia MCU connected GPIOs and + board power off. + config USB_HUB_USB251XB tristate "USB251XB Hub Controller Configuration Driver" depends on I2C diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 1522f6c3b7d..9e829905f12 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -81,6 +81,7 @@ obj-$(CONFIG_SYS_DPAA_QBMAN) += fsl_portals.o obj-$(CONFIG_TEGRA186_BPMP) += tegra186_bpmp.o obj-$(CONFIG_TEGRA_CAR) += tegra_car.o obj-$(CONFIG_TEST_DRV) += test_drv.o +obj-$(CONFIG_$(SPL_TPL_)TURRIS_OMNIA_MCU) += turris_omnia_mcu.o obj-$(CONFIG_TWL4030_LED) += twl4030_led.o obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress_config.o obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o diff --git a/drivers/misc/turris_omnia_mcu.c b/drivers/misc/turris_omnia_mcu.c new file mode 100644 index 00000000000..6b2f17c0002 --- /dev/null +++ b/drivers/misc/turris_omnia_mcu.c @@ -0,0 +1,411 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2022 Pali Rohár <pali@kernel.org> + * Copyright (C) 2024 Marek Behún <kabel@kernel.org> + */ + +#include <common.h> +#include <console.h> +#include <dm.h> +#include <dm/lists.h> +#include <i2c.h> +#include <rng.h> +#include <sysreset.h> +#include <turris-omnia-mcu-interface.h> +#include <asm/byteorder.h> +#include <asm/gpio.h> +#include <linux/delay.h> +#include <linux/log2.h> + +#define CMD_TRNG_MAX_ENTROPY_LEN 64 + +struct turris_omnia_mcu_info { + u32 features; +}; + +static int omnia_gpio_get_function(struct udevice *dev, uint offset) +{ + struct turris_omnia_mcu_info *info = dev_get_priv(dev->parent); + + switch (offset) { + /* bank 0 */ + case 0 ... 15: + switch (offset) { + case ilog2(STS_USB30_PWRON): + case ilog2(STS_USB31_PWRON): + case ilog2(STS_ENABLE_4V5): + case ilog2(STS_BUTTON_MODE): + return GPIOF_OUTPUT; + default: + return GPIOF_INPUT; + } + + /* bank 1 - supported only when FEAT_EXT_CMDS is set */ + case (16 + 0) ... (16 + 31): + if (!(info->features & FEAT_EXT_CMDS)) + return -EINVAL; + return GPIOF_INPUT; + + /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */ + case (16 + 32 + 0) ... (16 + 32 + 15): + if (!(info->features & FEAT_EXT_CMDS)) + return -EINVAL; + if (!(info->features & FEAT_PERIPH_MCU)) + return -EINVAL; + return GPIOF_OUTPUT; + + default: + return -EINVAL; + } +} + +static int omnia_gpio_get_value(struct udevice *dev, uint offset) +{ + struct turris_omnia_mcu_info *info = dev_get_priv(dev->parent); + u32 val32; + u16 val16; + int ret; + + switch (offset) { + /* bank 0 */ + case 0 ... 15: + ret = dm_i2c_read(dev->parent, CMD_GET_STATUS_WORD, + (void *)&val16, sizeof(val16)); + if (ret) + return ret; + + return !!(le16_to_cpu(val16) & BIT(offset)); + + /* bank 1 - supported only when FEAT_EXT_CMDS is set */ + case (16 + 0) ... (16 + 31): + if (!(info->features & FEAT_EXT_CMDS)) + return -EINVAL; + + ret = dm_i2c_read(dev->parent, CMD_GET_EXT_STATUS_DWORD, + (void *)&val32, sizeof(val32)); + if (ret) + return ret; + + return !!(le32_to_cpu(val32) & BIT(offset - 16)); + + /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */ + case (16 + 32 + 0) ... (16 + 32 + 15): + if (!(info->features & FEAT_EXT_CMDS)) + return -EINVAL; + if (!(info->features & FEAT_PERIPH_MCU)) + return -EINVAL; + + ret = dm_i2c_read(dev->parent, CMD_GET_EXT_CONTROL_STATUS, + (void *)&val16, sizeof(val16)); + if (ret) + return ret; + + return !!(le16_to_cpu(val16) & BIT(offset - 16 - 32)); + + default: + return -EINVAL; + } +} + +static int omnia_gpio_set_value(struct udevice *dev, uint offset, int value) +{ + struct turris_omnia_mcu_info *info = dev_get_priv(dev->parent); + u16 valmask16[2]; + u8 valmask8[2]; + + switch (offset) { + /* bank 0 */ + case 0 ... 15: + switch (offset) { + case ilog2(STS_USB30_PWRON): + valmask8[1] = CTL_USB30_PWRON; + break; + case ilog2(STS_USB31_PWRON): + valmask8[1] = CTL_USB31_PWRON; + break; + case ilog2(STS_ENABLE_4V5): + valmask8[1] = CTL_ENABLE_4V5; + break; + case ilog2(STS_BUTTON_MODE): + valmask8[1] = CTL_BUTTON_MODE; + break; + default: + return -EINVAL; + } + + valmask8[0] = value ? valmask8[1] : 0; + + return dm_i2c_write(dev->parent, CMD_GENERAL_CONTROL, valmask8, + sizeof(valmask8)); + + /* bank 2 - supported only when FEAT_EXT_CMDS and FEAT_PERIPH_MCU is set */ + case (16 + 32 + 0) ... (16 + 32 + 15): + if (!(info->features & FEAT_EXT_CMDS)) + return -EINVAL; + if (!(info->features & FEAT_PERIPH_MCU)) + return -EINVAL; + + valmask16[1] = cpu_to_le16(BIT(offset - 16 - 32)); + valmask16[0] = value ? valmask16[1] : 0; + + return dm_i2c_write(dev->parent, CMD_EXT_CONTROL, + (void *)valmask16, sizeof(valmask16)); + + default: + return -EINVAL; + } +} + +static int omnia_gpio_direction_input(struct udevice *dev, uint offset) +{ + int ret; + + ret = omnia_gpio_get_function(dev, offset); + if (ret < 0) + return ret; + else if (ret != GPIOF_INPUT) + return -EOPNOTSUPP; + + return 0; +} + +static int omnia_gpio_direction_output(struct udevice *dev, uint offset, int value) +{ + int ret; + + ret = omnia_gpio_get_function(dev, offset); + if (ret < 0) + return ret; + else if (ret != GPIOF_OUTPUT) + return -EOPNOTSUPP; + + return omnia_gpio_set_value(dev, offset, value); +} + +static int omnia_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, + struct ofnode_phandle_args *args) +{ + uint bank, gpio, flags, offset; + int ret; + + if (args->args_count != 3) + return -EINVAL; + + bank = args->args[0]; + gpio = args->args[1]; + flags = args->args[2]; + + switch (bank) { + case 0: + if (gpio >= 16) + return -EINVAL; + offset = gpio; + break; + case 1: + if (gpio >= 32) + return -EINVAL; + offset = 16 + gpio; + break; + case 2: + if (gpio >= 16) + return -EINVAL; + offset = 16 + 32 + gpio; + break; + default: + return -EINVAL; + } + + ret = omnia_gpio_get_function(dev, offset); + if (ret < 0) + return ret; + + desc->offset = offset; + desc->flags = gpio_flags_xlate(flags); + + return 0; +} + +static const struct dm_gpio_ops omnia_gpio_ops = { + .direction_input = omnia_gpio_direction_input, + .direction_output = omnia_gpio_direction_output, + .get_value = omnia_gpio_get_value, + .set_value = omnia_gpio_set_value, + .get_function = omnia_gpio_get_function, + .xlate = omnia_gpio_xlate, +}; + +static int omnia_gpio_probe(struct udevice *dev) +{ + struct turris_omnia_mcu_info *info = dev_get_priv(dev->parent); + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + + uc_priv->bank_name = "mcu_"; + + if ((info->features & FEAT_EXT_CMDS) && (info->features & FEAT_PERIPH_MCU)) + uc_priv->gpio_count = 16 + 32 + 16; + else if (info->features & FEAT_EXT_CMDS) + uc_priv->gpio_count = 16 + 32; + else + uc_priv->gpio_count = 16; + + return 0; +} + +U_BOOT_DRIVER(turris_omnia_mcu_gpio) = { + .name = "turris-omnia-mcu-gpio", + .id = UCLASS_GPIO, + .ops = &omnia_gpio_ops, + .probe = omnia_gpio_probe, +}; + +static int omnia_sysreset_request(struct udevice *dev, enum sysreset_t type) +{ + struct { + u16 magic; + u16 arg; + u32 csum; + } __packed args; + + if (type != SYSRESET_POWER_OFF) + return -EPROTONOSUPPORT; + + args.magic = CMD_POWER_OFF_MAGIC; + args.arg = CMD_POWER_OFF_POWERON_BUTTON; + args.csum = 0xba3b7212; + + return dm_i2c_write(dev->parent, CMD_POWER_OFF, (void *)&args, + sizeof(args)); +} + +static const struct sysreset_ops omnia_sysreset_ops = { + .request = omnia_sysreset_request, +}; + +U_BOOT_DRIVER(turris_omnia_mcu_sysreset) = { + .name = "turris-omnia-mcu-sysreset", + .id = UCLASS_SYSRESET, + .ops = &omnia_sysreset_ops, +}; + +static int omnia_rng_read(struct udevice *dev, void *data, size_t count) +{ + u8 buf[1 + CMD_TRNG_MAX_ENTROPY_LEN]; + size_t len; + int ret; + + while (count) { + ret = dm_i2c_read(dev->parent, CMD_TRNG_COLLECT_ENTROPY, buf, + sizeof(buf)); + if (ret) + return ret; + + len = min_t(size_t, buf[0], + min_t(size_t, CMD_TRNG_MAX_ENTROPY_LEN, count)); + + if (!len) { + /* wait 500ms (fail if interrupted), then try again */ + for (int i = 0; i < 5; ++i) { + mdelay(100); + if (ctrlc()) + return -EINTR; + } + continue; + } + + memcpy(data, &buf[1], len); + data += len; + count -= len; + } + + return 0; +} + +static const struct dm_rng_ops omnia_rng_ops = { + .read = omnia_rng_read, +}; + +U_BOOT_DRIVER(turris_omnia_mcu_trng) = { + .name = "turris-omnia-mcu-trng", + .id = UCLASS_RNG, + .ops = &omnia_rng_ops, +}; + +static int turris_omnia_mcu_bind(struct udevice *dev) +{ + /* bind MCU GPIOs as a child device */ + return device_bind_driver_to_node(dev, "turris-omnia-mcu-gpio", + "turris-omnia-mcu-gpio", + dev_ofnode(dev), NULL); +} + +static int turris_omnia_mcu_probe(struct udevice *dev) +{ + struct turris_omnia_mcu_info *info = dev_get_priv(dev); + u32 dword; + u16 word; + int ret; + + ret = dm_i2c_read(dev, CMD_GET_STATUS_WORD, (void *)&word, sizeof(word)); + if (ret < 0) { + printf("Error: turris_omnia_mcu CMD_GET_STATUS_WORD failed: %d\n", + ret); + return ret; + } + + if (le16_to_cpu(word) & STS_FEATURES_SUPPORTED) { + /* try read 32-bit features */ + ret = dm_i2c_read(dev, CMD_GET_FEATURES, (void *)&dword, + sizeof(dword)); + if (ret < 0) { + /* try read 16-bit features */ + ret = dm_i2c_read(dev, CMD_GET_FEATURES, (void *)&word, + sizeof(word)); + if (ret < 0) { + printf("Error: turris_omnia_mcu CMD_GET_FEATURES failed: %d\n", + ret); + return ret; + } + + info->features = le16_to_cpu(word); + } else { + info->features = le32_to_cpu(dword); + if (info->features & FEAT_FROM_BIT_16_INVALID) + info->features &= GENMASK(15, 0); + } + } + + /* bind sysreset if poweroff is supported */ + if (info->features & FEAT_POWEROFF_WAKEUP) { + ret = device_bind_driver_to_node(dev, + "turris-omnia-mcu-sysreset", + "turris-omnia-mcu-sysreset", + dev_ofnode(dev), NULL); + if (ret < 0) + return ret; + } + + /* bind rng if trng is supported */ + if (info->features & FEAT_TRNG) { + ret = device_bind_driver_to_node(dev, "turris-omnia-mcu-trng", + "turris-omnia-mcu-trng", + dev_ofnode(dev), NULL); + if (ret < 0) + return ret; + } + + return 0; +} + +static const struct udevice_id turris_omnia_mcu_ids[] = { + { .compatible = "cznic,turris-omnia-mcu" }, + { } +}; + +U_BOOT_DRIVER(turris_omnia_mcu) = { + .name = "turris-omnia-mcu", + .id = UCLASS_MISC, + .bind = turris_omnia_mcu_bind, + .probe = turris_omnia_mcu_probe, + .priv_auto = sizeof(struct turris_omnia_mcu_info), + .of_match = turris_omnia_mcu_ids, +}; diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig index f4ca174805a..b9fe608c279 100644 --- a/drivers/phy/qcom/Kconfig +++ b/drivers/phy/qcom/Kconfig @@ -12,6 +12,21 @@ config PHY_QCOM_IPQ4019_USB help Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. +config PHY_QCOM_QUSB2 + tristate "Qualcomm USB QUSB2 PHY driver" + depends on PHY && ARCH_SNAPDRAGON + help + Enable this to support the Super-Speed USB transceiver on various + Qualcomm chipsets. + +config PHY_QCOM_USB_SNPS_FEMTO_V2 + tristate "Qualcomm SNPS FEMTO USB HS PHY v2" + depends on PHY && ARCH_SNAPDRAGON + help + Enable this to support the Qualcomm Synopsys DesignWare Core 7nm + High-Speed PHY driver. This driver supports the Hi-Speed PHY which + is usually paired with Synopsys DWC3 USB IPs on MSM SOCs. + config PHY_QCOM_USB_HS_28NM tristate "Qualcomm 28nm High-Speed PHY" depends on PHY && ARCH_SNAPDRAGON diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile index 2113f178c0c..5f4db4a5378 100644 --- a/drivers/phy/qcom/Makefile +++ b/drivers/phy/qcom/Makefile @@ -1,4 +1,6 @@ obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o +obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o +obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2) += phy-qcom-snps-femto-v2.o obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o diff --git a/drivers/phy/qcom/phy-qcom-qusb2.c b/drivers/phy/qcom/phy-qcom-qusb2.c new file mode 100644 index 00000000000..c91ba18c4ab --- /dev/null +++ b/drivers/phy/qcom/phy-qcom-qusb2.c @@ -0,0 +1,429 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Bhupesh Sharma <bhupesh.sharma@linaro.org> + * + * Based on Linux driver + */ + +#include <dm.h> +#include <generic-phy.h> +#include <linux/bitops.h> +#include <asm/io.h> +#include <reset.h> +#include <clk.h> +#include <linux/delay.h> + +#include <dt-bindings/phy/phy-qcom-qusb2.h> + +#define QUSB2PHY_PLL 0x0 +#define QUSB2PHY_PLL_TEST 0x04 +#define CLK_REF_SEL BIT(7) + +#define QUSB2PHY_PLL_TUNE 0x08 +#define QUSB2PHY_PLL_USER_CTL1 0x0c +#define QUSB2PHY_PLL_USER_CTL2 0x10 +#define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c +#define QUSB2PHY_PLL_PWR_CTRL 0x18 + +/* QUSB2PHY_PLL_STATUS register bits */ +#define PLL_LOCKED BIT(5) + +/* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */ +#define CORE_READY_STATUS BIT(0) + +/* QUSB2PHY_PORT_POWERDOWN register bits */ +#define CLAMP_N_EN BIT(5) +#define FREEZIO_N BIT(1) +#define POWER_DOWN BIT(0) + +/* QUSB2PHY_PWR_CTRL1 register bits */ +#define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5) +#define PWR_CTRL1_CLAMP_N_EN BIT(1) + +#define QUSB2PHY_REFCLK_ENABLE BIT(0) + +#define PHY_CLK_SCHEME_SEL BIT(0) + +/* QUSB2PHY_INTR_CTRL register bits */ +#define DMSE_INTR_HIGH_SEL BIT(4) +#define DPSE_INTR_HIGH_SEL BIT(3) +#define CHG_DET_INTR_EN BIT(2) +#define DMSE_INTR_EN BIT(1) +#define DPSE_INTR_EN BIT(0) + +/* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */ +#define CORE_PLL_EN_FROM_RESET BIT(4) +#define CORE_RESET BIT(5) +#define CORE_RESET_MUX BIT(6) + +/* QUSB2PHY_IMP_CTRL1 register bits */ +#define IMP_RES_OFFSET_MASK GENMASK(5, 0) +#define IMP_RES_OFFSET_SHIFT 0x0 + +/* QUSB2PHY_PLL_BIAS_CONTROL_2 register bits */ +#define BIAS_CTRL2_RES_OFFSET_MASK GENMASK(5, 0) +#define BIAS_CTRL2_RES_OFFSET_SHIFT 0x0 + +/* QUSB2PHY_CHG_CONTROL_2 register bits */ +#define CHG_CTRL2_OFFSET_MASK GENMASK(5, 4) +#define CHG_CTRL2_OFFSET_SHIFT 0x4 + +/* QUSB2PHY_PORT_TUNE1 register bits */ +#define HSTX_TRIM_MASK GENMASK(7, 4) +#define HSTX_TRIM_SHIFT 0x4 +#define PREEMPH_WIDTH_HALF_BIT BIT(2) +#define PREEMPHASIS_EN_MASK GENMASK(1, 0) +#define PREEMPHASIS_EN_SHIFT 0x0 + +/* QUSB2PHY_PORT_TUNE2 register bits */ +#define HSDISC_TRIM_MASK GENMASK(1, 0) +#define HSDISC_TRIM_SHIFT 0x0 + +#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04 +#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c +#define QUSB2PHY_PLL_CMODE 0x2c +#define QUSB2PHY_PLL_LOCK_DELAY 0x184 +#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4 +#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194 +#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198 +#define QUSB2PHY_PWR_CTRL2 0x214 +#define QUSB2PHY_IMP_CTRL1 0x220 +#define QUSB2PHY_IMP_CTRL2 0x224 +#define QUSB2PHY_CHG_CTRL2 0x23c + +struct qusb2_phy_init_tbl { + unsigned int offset; + unsigned int val; + /* + * register part of layout ? + * if yes, then offset gives index in the reg-layout + */ + int in_layout; +}; + +struct qusb2_phy_cfg { + const struct qusb2_phy_init_tbl *tbl; + /* number of entries in the table */ + unsigned int tbl_num; + /* offset to PHY_CLK_SCHEME register in TCSR map */ + unsigned int clk_scheme_offset; + + /* array of registers with different offsets */ + const unsigned int *regs; + unsigned int mask_core_ready; + unsigned int disable_ctrl; + unsigned int autoresume_en; + + /* true if PHY has PLL_TEST register to select clk_scheme */ + bool has_pll_test; + + /* true if TUNE1 register must be updated by fused value, else TUNE2 */ + bool update_tune1_with_efuse; + + /* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */ + bool has_pll_override; +}; + +/* set of registers with offsets different per-PHY */ +enum qusb2phy_reg_layout { + QUSB2PHY_PLL_CORE_INPUT_OVERRIDE, + QUSB2PHY_PLL_STATUS, + QUSB2PHY_PORT_TUNE1, + QUSB2PHY_PORT_TUNE2, + QUSB2PHY_PORT_TUNE3, + QUSB2PHY_PORT_TUNE4, + QUSB2PHY_PORT_TUNE5, + QUSB2PHY_PORT_TEST1, + QUSB2PHY_PORT_TEST2, + QUSB2PHY_PORT_POWERDOWN, + QUSB2PHY_INTR_CTRL, +}; + +#define QUSB2_PHY_INIT_CFG(o, v) \ + { \ + .offset = o, .val = v, \ + } + +#define QUSB2_PHY_INIT_CFG_L(o, v) \ + { \ + .offset = o, .val = v, .in_layout = 1, \ + } + +static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = { + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21), + + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), +}; + +static const unsigned int sm6115_regs_layout[] = { + [QUSB2PHY_PLL_STATUS] = 0x38, [QUSB2PHY_PORT_TUNE1] = 0x80, + [QUSB2PHY_PORT_TUNE2] = 0x84, [QUSB2PHY_PORT_TUNE3] = 0x88, + [QUSB2PHY_PORT_TUNE4] = 0x8c, [QUSB2PHY_PORT_TUNE5] = 0x90, + [QUSB2PHY_PORT_TEST1] = 0xb8, [QUSB2PHY_PORT_TEST2] = 0x9c, + [QUSB2PHY_PORT_POWERDOWN] = 0xb4, [QUSB2PHY_INTR_CTRL] = 0xbc, +}; + +static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = { + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21), + QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x0), + QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58), + + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x30), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0), +}; + +static const unsigned int qusb2_v2_regs_layout[] = { + [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8, + [QUSB2PHY_PLL_STATUS] = 0x1a0, + [QUSB2PHY_PORT_TUNE1] = 0x240, + [QUSB2PHY_PORT_TUNE2] = 0x244, + [QUSB2PHY_PORT_TUNE3] = 0x248, + [QUSB2PHY_PORT_TUNE4] = 0x24c, + [QUSB2PHY_PORT_TUNE5] = 0x250, + [QUSB2PHY_PORT_TEST1] = 0x254, + [QUSB2PHY_PORT_TEST2] = 0x258, + [QUSB2PHY_PORT_POWERDOWN] = 0x210, + [QUSB2PHY_INTR_CTRL] = 0x230, +}; + +static const struct qusb2_phy_cfg sm6115_phy_cfg = { + .tbl = sm6115_init_tbl, + .tbl_num = ARRAY_SIZE(sm6115_init_tbl), + .regs = sm6115_regs_layout, + + .has_pll_test = true, + .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN), + .mask_core_ready = PLL_LOCKED, + .autoresume_en = BIT(3), +}; + +static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = { + .tbl = qusb2_v2_init_tbl, + .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl), + .regs = qusb2_v2_regs_layout, + + .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN | + POWER_DOWN), + .mask_core_ready = CORE_READY_STATUS, + .has_pll_override = true, + .autoresume_en = BIT(0), + .update_tune1_with_efuse = true, +}; + +/** + * struct qusb2_phy - structure holding qusb2 phy attributes + * + * @phy: generic phy + * @base: iomapped memory space for qubs2 phy + * + * @cfg_ahb_clk: AHB2PHY interface clock + * @phy_rst: phy reset control + * + * @cfg: phy config data + * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme + */ +struct qusb2_phy { + struct phy *phy; + void __iomem *base; + + struct clk cfg_ahb_clk; + struct reset_ctl phy_rst; + + const struct qusb2_phy_cfg *cfg; + bool has_se_clk_scheme; +}; + +static inline void qusb2_phy_configure(void __iomem *base, + const unsigned int *regs, + const struct qusb2_phy_init_tbl tbl[], + int num) +{ + int i; + + for (i = 0; i < num; i++) { + if (tbl[i].in_layout) + writel(tbl[i].val, base + regs[tbl[i].offset]); + else + writel(tbl[i].val, base + tbl[i].offset); + } +} + +static int qusb2phy_do_reset(struct qusb2_phy *qphy) +{ + int ret; + + ret = reset_assert(&qphy->phy_rst); + if (ret) + return ret; + + udelay(500); + + ret = reset_deassert(&qphy->phy_rst); + if (ret) + return ret; + + return 0; +} + +static int qusb2phy_power_on(struct phy *phy) +{ + struct qusb2_phy *qphy = dev_get_priv(phy->dev); + const struct qusb2_phy_cfg *cfg = qphy->cfg; + int ret; + u32 val; + + ret = qusb2phy_do_reset(qphy); + if (ret) + return ret; + + /* Disable the PHY */ + setbits_le32(qphy->base + cfg->regs[QUSB2PHY_PORT_POWERDOWN], + qphy->cfg->disable_ctrl); + + if (cfg->has_pll_test) { + /* save reset value to override reference clock scheme later */ + val = readl(qphy->base + QUSB2PHY_PLL_TEST); + } + + qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl, cfg->tbl_num); + + /* Enable the PHY */ + clrbits_le32(qphy->base + cfg->regs[QUSB2PHY_PORT_POWERDOWN], + POWER_DOWN); + + /* Required to get phy pll lock successfully */ + udelay(150); + + if (cfg->has_pll_test) { + val |= CLK_REF_SEL; + + writel(val, qphy->base + QUSB2PHY_PLL_TEST); + + /* ensure above write is through */ + readl(qphy->base + QUSB2PHY_PLL_TEST); + } + + /* Required to get phy pll lock successfully */ + udelay(100); + + val = readb(qphy->base + cfg->regs[QUSB2PHY_PLL_STATUS]); + if (!(val & cfg->mask_core_ready)) { + pr_err("QUSB2PHY pll lock failed: status reg = %x\n", val); + ret = -EBUSY; + return ret; + } + + return 0; +} + +static int qusb2phy_power_off(struct phy *phy) +{ + struct qusb2_phy *qphy = dev_get_priv(phy->dev); + + /* Disable the PHY */ + setbits_le32(qphy->base + qphy->cfg->regs[QUSB2PHY_PORT_POWERDOWN], + qphy->cfg->disable_ctrl); + + reset_assert(&qphy->phy_rst); + + clk_disable(&qphy->cfg_ahb_clk); + + return 0; +} + +static int qusb2phy_clk_init(struct udevice *dev, struct qusb2_phy *qphy) +{ + int ret; + + /* We ignore the ref clock as we currently lack a driver for rpmcc/rpmhcc where + * it usually comes from - we assume it's always on. + */ + ret = clk_get_by_name(dev, "cfg_ahb", &qphy->cfg_ahb_clk); + if (ret == -ENOSYS || ret == -ENOENT) + return 0; + if (ret) + return ret; + + ret = clk_enable(&qphy->cfg_ahb_clk); + if (ret) + return ret; + + return 0; +} + +static int qusb2phy_probe(struct udevice *dev) +{ + struct qusb2_phy *qphy = dev_get_priv(dev); + int ret; + + qphy->base = (void __iomem *)dev_read_addr(dev); + if (IS_ERR(qphy->base)) + return PTR_ERR(qphy->base); + + ret = qusb2phy_clk_init(dev, qphy); + if (ret) { + printf("%s: Couldn't get clocks: %d\n", __func__, ret); + return ret; + } + + ret = reset_get_by_index(dev, 0, &qphy->phy_rst); + if (ret) { + printf("%s: Couldn't get resets: %d\n", __func__, ret); + return ret; + } + + qphy->cfg = (const struct qusb2_phy_cfg *)dev_get_driver_data(dev); + if (!qphy->cfg) { + printf("%s: Couldn't get driver data\n", __func__); + return -EINVAL; + } + + debug("%s success qusb phy cfg %p\n", __func__, qphy->cfg); + return 0; +} + +static struct phy_ops qusb2phy_ops = { + .power_on = qusb2phy_power_on, + .power_off = qusb2phy_power_off, +}; + +static const struct udevice_id qusb2phy_ids[] = { + { .compatible = "qcom,qusb2-phy" }, + { .compatible = "qcom,qcm2290-qusb2-phy", + .data = (ulong)&sm6115_phy_cfg }, + { .compatible = "qcom,sm6115-qusb2-phy", + .data = (ulong)&sm6115_phy_cfg }, + { .compatible = "qcom,qusb2-v2-phy", .data = (ulong)&qusb2_v2_phy_cfg }, + {} +}; + +U_BOOT_DRIVER(qcom_qusb2_phy) = { + .name = "qcom-qusb2-phy", + .id = UCLASS_PHY, + .of_match = qusb2phy_ids, + .ops = &qusb2phy_ops, + .probe = qusb2phy_probe, + .priv_auto = sizeof(struct qusb2_phy), +}; diff --git a/drivers/phy/qcom/phy-qcom-snps-femto-v2.c b/drivers/phy/qcom/phy-qcom-snps-femto-v2.c new file mode 100644 index 00000000000..a1675b664e4 --- /dev/null +++ b/drivers/phy/qcom/phy-qcom-snps-femto-v2.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + * Copyright (C) 2023 Bhupesh Sharma <bhupesh.sharma@linaro.org> + * + * Based on Linux driver + */ + +#include <clk.h> +#include <clk-uclass.h> +#include <dm.h> +#include <dm/device_compat.h> +#include <dm/devres.h> +#include <generic-phy.h> +#include <malloc.h> +#include <reset.h> + +#include <asm/io.h> +#include <linux/bitops.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/iopoll.h> + +#define USB2_PHY_USB_PHY_UTMI_CTRL0 (0x3c) +#define SLEEPM BIT(0) +#define OPMODE_MASK GENMASK(4, 3) +#define OPMODE_NORMAL (0x00) +#define OPMODE_NONDRIVING BIT(3) +#define TERMSEL BIT(5) + +#define USB2_PHY_USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define SIDDQ BIT(2) +#define RETENABLEN BIT(3) +#define FSEL_MASK GENMASK(6, 4) +#define FSEL_DEFAULT (0x3 << 4) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1 (0x58) +#define VBUSVLDEXTSEL0 BIT(4) +#define PLLBTUNE BIT(5) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2 (0x5c) +#define VREGBYPASS BIT(0) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL1 (0x60) +#define VBUSVLDEXT0 BIT(0) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL2 (0x64) +#define USB2_AUTO_RESUME BIT(0) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) + +#define USB2_PHY_USB_PHY_CFG0 (0x94) +#define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0) +#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1) + +#define USB2_PHY_USB_PHY_REFCLK_CTRL (0xa0) +#define REFCLK_SEL_MASK GENMASK(1, 0) +#define REFCLK_SEL_DEFAULT (0x2 << 0) + +struct qcom_snps_hsphy { + void __iomem *base; + struct clk_bulk clks; + struct reset_ctl_bulk resets; +}; + +/* + * We should just be able to use clrsetbits_le32() here, but this results + * in crashes on some boards. This is suspected to be because of some bus + * arbitration quirks with the PHY (i.e. it takes several bus clock cycles + * for the write to actually go through). The readl_relaxed() at the end will + * block until the write is completed (and all registers updated), and thus + * ensure that we don't access the PHY registers when they're in an + * undetermined state. + */ +static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset, + u32 mask, u32 val) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + + reg &= ~mask; + reg |= val & mask; + writel_relaxed(reg, base + offset); + + /* Ensure above write is completed */ + readl_relaxed(base + offset); +} + +static int qcom_snps_hsphy_usb_init(struct phy *phy) +{ + struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_CFG0, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN); + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_UTMI_CTRL5, POR, + POR); + qcom_snps_hsphy_write_mask(priv->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, FSEL_MASK, 0); + qcom_snps_hsphy_write_mask(priv->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, + PLLBTUNE, PLLBTUNE); + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_REFCLK_CTRL, + REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK); + qcom_snps_hsphy_write_mask(priv->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, + VBUSVLDEXTSEL0, VBUSVLDEXTSEL0); + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1, + VBUSVLDEXT0, VBUSVLDEXT0); + + qcom_snps_hsphy_write_mask(priv->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2, + VREGBYPASS, VREGBYPASS); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_UTMI_CTRL0, + SLEEPM, SLEEPM); + + qcom_snps_hsphy_write_mask( + priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ, 0); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_UTMI_CTRL5, POR, + 0); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL, 0); + + qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_CFG0, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0); + + return 0; +} + +static int qcom_snps_hsphy_power_on(struct phy *phy) +{ + struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev); + int ret; + + clk_enable_bulk(&priv->clks); + + ret = reset_deassert_bulk(&priv->resets); + if (ret) + return ret; + + ret = qcom_snps_hsphy_usb_init(phy); + if (ret) + return ret; + + return 0; +} + +static int qcom_snps_hsphy_power_off(struct phy *phy) +{ + struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev); + + reset_assert_bulk(&priv->resets); + clk_disable_bulk(&priv->clks); + + return 0; +} + +static int qcom_snps_hsphy_phy_probe(struct udevice *dev) +{ + struct qcom_snps_hsphy *priv = dev_get_priv(dev); + int ret; + + priv->base = dev_read_addr_ptr(dev); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + ret = clk_get_bulk(dev, &priv->clks); + if (ret < 0 && ret != -ENOENT) { + printf("%s: Failed to get clocks %d\n", __func__, ret); + return ret; + } + + ret = reset_get_bulk(dev, &priv->resets); + if (ret < 0) { + printf("failed to get resets, ret = %d\n", ret); + return ret; + } + + clk_enable_bulk(&priv->clks); + reset_deassert_bulk(&priv->resets); + + return 0; +} + +static struct phy_ops qcom_snps_hsphy_phy_ops = { + .power_on = qcom_snps_hsphy_power_on, + .power_off = qcom_snps_hsphy_power_off, +}; + +static const struct udevice_id qcom_snps_hsphy_phy_ids[] = { + { .compatible = "qcom,sm8150-usb-hs-phy" }, + { .compatible = "qcom,usb-snps-hs-5nm-phy" }, + { .compatible = "qcom,usb-snps-hs-7nm-phy" }, + { .compatible = "qcom,usb-snps-femto-v2-phy" }, + {} +}; + +U_BOOT_DRIVER(qcom_usb_qcom_snps_hsphy) = { + .name = "qcom-snps-hsphy", + .id = UCLASS_PHY, + .of_match = qcom_snps_hsphy_phy_ids, + .ops = &qcom_snps_hsphy_phy_ops, + .probe = qcom_snps_hsphy_phy_probe, + .priv_auto = sizeof(struct qcom_snps_hsphy), +}; diff --git a/drivers/pinctrl/qcom/pinctrl-apq8016.c b/drivers/pinctrl/qcom/pinctrl-apq8016.c index db0e2124684..a9a00f4b081 100644 --- a/drivers/pinctrl/qcom/pinctrl-apq8016.c +++ b/drivers/pinctrl/qcom/pinctrl-apq8016.c @@ -49,7 +49,8 @@ static const char *apq8016_get_pin_name(struct udevice *dev, } } -static unsigned int apq8016_get_function_mux(unsigned int selector) +static unsigned int apq8016_get_function_mux(__maybe_unused unsigned int pin, + unsigned int selector) { return msm_pinctrl_functions[selector].val; } diff --git a/drivers/pinctrl/qcom/pinctrl-apq8096.c b/drivers/pinctrl/qcom/pinctrl-apq8096.c index 880df8fe3c7..9697cb5beb7 100644 --- a/drivers/pinctrl/qcom/pinctrl-apq8096.c +++ b/drivers/pinctrl/qcom/pinctrl-apq8096.c @@ -44,7 +44,8 @@ static const char *apq8096_get_pin_name(struct udevice *dev, } } -static unsigned int apq8096_get_function_mux(unsigned int selector) +static unsigned int apq8096_get_function_mux(__maybe_unused unsigned int pin, + unsigned int selector) { return msm_pinctrl_functions[selector].val; } diff --git a/drivers/pinctrl/qcom/pinctrl-ipq4019.c b/drivers/pinctrl/qcom/pinctrl-ipq4019.c index 74c04ab87cd..44792303133 100644 --- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c +++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c @@ -40,7 +40,8 @@ static const char *ipq4019_get_pin_name(struct udevice *dev, return pin_name; } -static unsigned int ipq4019_get_function_mux(unsigned int selector) +static unsigned int ipq4019_get_function_mux(__maybe_unused unsigned int pin, + unsigned int selector) { return msm_pinctrl_functions[selector].val; } diff --git a/drivers/pinctrl/qcom/pinctrl-qcom.c b/drivers/pinctrl/qcom/pinctrl-qcom.c index ee0624df296..909e566acf5 100644 --- a/drivers/pinctrl/qcom/pinctrl-qcom.c +++ b/drivers/pinctrl/qcom/pinctrl-qcom.c @@ -83,14 +83,14 @@ static int msm_pinmux_set(struct udevice *dev, unsigned int pin_selector, unsigned int func_selector) { struct msm_pinctrl_priv *priv = dev_get_priv(dev); + u32 func = priv->data->get_function_mux(pin_selector, func_selector); /* Always NOP for special pins, assume they're in the correct state */ if (qcom_is_special_pin(&priv->data->pin_data, pin_selector)) return 0; clrsetbits_le32(priv->base + GPIO_CONFIG_REG(priv, pin_selector), - TLMM_FUNC_SEL_MASK | TLMM_GPIO_DISABLE, - priv->data->get_function_mux(func_selector) << 2); + TLMM_FUNC_SEL_MASK | TLMM_GPIO_DISABLE, func << 2); return 0; } diff --git a/drivers/pinctrl/qcom/pinctrl-qcom.h b/drivers/pinctrl/qcom/pinctrl-qcom.h index 07f2eae9bae..49b7bfbc001 100644 --- a/drivers/pinctrl/qcom/pinctrl-qcom.h +++ b/drivers/pinctrl/qcom/pinctrl-qcom.h @@ -18,7 +18,8 @@ struct msm_pinctrl_data { int functions_count; const char *(*get_function_name)(struct udevice *dev, unsigned int selector); - unsigned int (*get_function_mux)(unsigned int selector); + unsigned int (*get_function_mux)(unsigned int pin, + unsigned int selector); const char *(*get_pin_name)(struct udevice *dev, unsigned int selector); }; diff --git a/drivers/pinctrl/qcom/pinctrl-qcs404.c b/drivers/pinctrl/qcom/pinctrl-qcs404.c index 3a2d4685997..4b7c670c90b 100644 --- a/drivers/pinctrl/qcom/pinctrl-qcs404.c +++ b/drivers/pinctrl/qcom/pinctrl-qcs404.c @@ -94,7 +94,8 @@ static const char *qcs404_get_pin_name(struct udevice *dev, } } -static unsigned int qcs404_get_function_mux(unsigned int selector) +static unsigned int qcs404_get_function_mux(__maybe_unused unsigned int pin, + unsigned int selector) { return msm_pinctrl_functions[selector].val; } diff --git a/drivers/pinctrl/qcom/pinctrl-sdm845.c b/drivers/pinctrl/qcom/pinctrl-sdm845.c index 76bd8c4ef41..459a4329ec8 100644 --- a/drivers/pinctrl/qcom/pinctrl-sdm845.c +++ b/drivers/pinctrl/qcom/pinctrl-sdm845.c @@ -70,7 +70,8 @@ static const char *sdm845_get_pin_name(struct udevice *dev, return pin_name; } -static unsigned int sdm845_get_function_mux(unsigned int selector) +static unsigned int sdm845_get_function_mux(__maybe_unused unsigned int pin, + unsigned int selector) { return msm_pinctrl_functions[selector].val; } diff --git a/drivers/serial/serial_msm_geni.c b/drivers/serial/serial_msm_geni.c index e5c3dcffc1c..5260474fb9a 100644 --- a/drivers/serial/serial_msm_geni.c +++ b/drivers/serial/serial_msm_geni.c @@ -603,7 +603,20 @@ U_BOOT_DRIVER(serial_msm_geni) = { .priv_auto = sizeof(struct msm_serial_data), .probe = msm_serial_probe, .ops = &msm_serial_ops, - .flags = DM_FLAG_PRE_RELOC, + .flags = DM_FLAG_PRE_RELOC | DM_FLAG_DEFAULT_PD_CTRL_OFF, +}; + +static const struct udevice_id geniqup_ids[] = { + { .compatible = "qcom,geni-se-qup" }, + { } +}; + +U_BOOT_DRIVER(geni_se_qup) = { + .name = "geni-se-qup", + .id = UCLASS_NOP, + .of_match = geniqup_ids, + .bind = dm_scan_fdt_dev, + .flags = DM_FLAG_PRE_RELOC | DM_FLAG_DEFAULT_PD_CTRL_OFF, }; #ifdef CONFIG_DEBUG_UART_MSM_GENI diff --git a/include/configs/jethub.h b/include/configs/jethub.h index e22db4991de..2c44bfc853e 100644 --- a/include/configs/jethub.h +++ b/include/configs/jethub.h @@ -11,7 +11,7 @@ #if defined(CONFIG_MESON_AXG) #define BOOTENV_DEV_RESCUE(devtypeu, devtypel, instance) \ "bootcmd_rescue=" \ - "if gpio input 10; then " \ + "if gpio input periphs-banks10; then " \ "run bootcmd_mmc0; " \ "run bootcmd_usb0;" \ "fi;\0" diff --git a/include/configs/meson64.h b/include/configs/meson64.h index efab9a624dc..65fa5f3d6dd 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -120,6 +120,12 @@ #include <config_distro_bootcmd.h> +#ifdef CONFIG_OF_UPSTREAM +#define FDTFILE_NAME CONFIG_DEFAULT_DEVICE_TREE ".dtb" +#else +#define FDTFILE_NAME "amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" +#endif + #ifndef CFG_EXTRA_ENV_SETTINGS #define CFG_EXTRA_ENV_SETTINGS \ "stdin=" STDIN_CFG "\0" \ @@ -133,7 +139,7 @@ "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ "fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \ "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \ - "fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ + "fdtfile=" FDTFILE_NAME "\0" \ "dfu_alt_info=fitimage ram " KERNEL_ADDR_R " 0x4000000 \0" \ BOOTENV #endif diff --git a/include/dt-bindings/gpio/meson-axg-gpio.h b/include/dt-bindings/gpio/meson-axg-gpio.h deleted file mode 100644 index 25bb1fffa97..00000000000 --- a/include/dt-bindings/gpio/meson-axg-gpio.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright (c) 2017 Amlogic, Inc. All rights reserved. - * Author: Xingyu Chen <xingyu.chen@amlogic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _DT_BINDINGS_MESON_AXG_GPIO_H -#define _DT_BINDINGS_MESON_AXG_GPIO_H - -/* First GPIO chip */ -#define GPIOAO_0 0 -#define GPIOAO_1 1 -#define GPIOAO_2 2 -#define GPIOAO_3 3 -#define GPIOAO_4 4 -#define GPIOAO_5 5 -#define GPIOAO_6 6 -#define GPIOAO_7 7 -#define GPIOAO_8 8 -#define GPIOAO_9 9 -#define GPIOAO_10 10 -#define GPIOAO_11 11 -#define GPIOAO_12 12 -#define GPIOAO_13 13 -#define GPIO_TEST_N 14 - -/* Second GPIO chip */ -#define GPIOZ_0 0 -#define GPIOZ_1 1 -#define GPIOZ_2 2 -#define GPIOZ_3 3 -#define GPIOZ_4 4 -#define GPIOZ_5 5 -#define GPIOZ_6 6 -#define GPIOZ_7 7 -#define GPIOZ_8 8 -#define GPIOZ_9 9 -#define GPIOZ_10 10 -#define BOOT_0 11 -#define BOOT_1 12 -#define BOOT_2 13 -#define BOOT_3 14 -#define BOOT_4 15 -#define BOOT_5 16 -#define BOOT_6 17 -#define BOOT_7 18 -#define BOOT_8 19 -#define BOOT_9 20 -#define BOOT_10 21 -#define BOOT_11 22 -#define BOOT_12 23 -#define BOOT_13 24 -#define BOOT_14 25 -#define GPIOA_0 26 -#define GPIOA_1 27 -#define GPIOA_2 28 -#define GPIOA_3 29 -#define GPIOA_4 30 -#define GPIOA_5 31 -#define GPIOA_6 32 -#define GPIOA_7 33 -#define GPIOA_8 34 -#define GPIOA_9 35 -#define GPIOA_10 36 -#define GPIOA_11 37 -#define GPIOA_12 38 -#define GPIOA_13 39 -#define GPIOA_14 40 -#define GPIOA_15 41 -#define GPIOA_16 42 -#define GPIOA_17 43 -#define GPIOA_18 44 -#define GPIOA_19 45 -#define GPIOA_20 46 -#define GPIOX_0 47 -#define GPIOX_1 48 -#define GPIOX_2 49 -#define GPIOX_3 50 -#define GPIOX_4 51 -#define GPIOX_5 52 -#define GPIOX_6 53 -#define GPIOX_7 54 -#define GPIOX_8 55 -#define GPIOX_9 56 -#define GPIOX_10 57 -#define GPIOX_11 58 -#define GPIOX_12 59 -#define GPIOX_13 60 -#define GPIOX_14 61 -#define GPIOX_15 62 -#define GPIOX_16 63 -#define GPIOX_17 64 -#define GPIOX_18 65 -#define GPIOX_19 66 -#define GPIOX_20 67 -#define GPIOX_21 68 -#define GPIOX_22 69 -#define GPIOY_0 70 -#define GPIOY_1 71 -#define GPIOY_2 72 -#define GPIOY_3 73 -#define GPIOY_4 74 -#define GPIOY_5 75 -#define GPIOY_6 76 -#define GPIOY_7 77 -#define GPIOY_8 78 -#define GPIOY_9 79 -#define GPIOY_10 80 -#define GPIOY_11 81 -#define GPIOY_12 82 -#define GPIOY_13 83 -#define GPIOY_14 84 -#define GPIOY_15 85 - -#endif /* _DT_BINDINGS_MESON_AXG_GPIO_H */ diff --git a/include/dt-bindings/gpio/meson-g12a-gpio.h b/include/dt-bindings/gpio/meson-g12a-gpio.h deleted file mode 100644 index f7bd69350d1..00000000000 --- a/include/dt-bindings/gpio/meson-g12a-gpio.h +++ /dev/null @@ -1,114 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ -/* - * Copyright (c) 2018 Amlogic, Inc. All rights reserved. - * Author: Xingyu Chen <xingyu.chen@amlogic.com> - */ - -#ifndef _DT_BINDINGS_MESON_G12A_GPIO_H -#define _DT_BINDINGS_MESON_G12A_GPIO_H - -/* First GPIO chip */ -#define GPIOAO_0 0 -#define GPIOAO_1 1 -#define GPIOAO_2 2 -#define GPIOAO_3 3 -#define GPIOAO_4 4 -#define GPIOAO_5 5 -#define GPIOAO_6 6 -#define GPIOAO_7 7 -#define GPIOAO_8 8 -#define GPIOAO_9 9 -#define GPIOAO_10 10 -#define GPIOAO_11 11 -#define GPIOE_0 12 -#define GPIOE_1 13 -#define GPIOE_2 14 - -/* Second GPIO chip */ -#define GPIOZ_0 0 -#define GPIOZ_1 1 -#define GPIOZ_2 2 -#define GPIOZ_3 3 -#define GPIOZ_4 4 -#define GPIOZ_5 5 -#define GPIOZ_6 6 -#define GPIOZ_7 7 -#define GPIOZ_8 8 -#define GPIOZ_9 9 -#define GPIOZ_10 10 -#define GPIOZ_11 11 -#define GPIOZ_12 12 -#define GPIOZ_13 13 -#define GPIOZ_14 14 -#define GPIOZ_15 15 -#define GPIOH_0 16 -#define GPIOH_1 17 -#define GPIOH_2 18 -#define GPIOH_3 19 -#define GPIOH_4 20 -#define GPIOH_5 21 -#define GPIOH_6 22 -#define GPIOH_7 23 -#define GPIOH_8 24 -#define BOOT_0 25 -#define BOOT_1 26 -#define BOOT_2 27 -#define BOOT_3 28 -#define BOOT_4 29 -#define BOOT_5 30 -#define BOOT_6 31 -#define BOOT_7 32 -#define BOOT_8 33 -#define BOOT_9 34 -#define BOOT_10 35 -#define BOOT_11 36 -#define BOOT_12 37 -#define BOOT_13 38 -#define BOOT_14 39 -#define BOOT_15 40 -#define GPIOC_0 41 -#define GPIOC_1 42 -#define GPIOC_2 43 -#define GPIOC_3 44 -#define GPIOC_4 45 -#define GPIOC_5 46 -#define GPIOC_6 47 -#define GPIOC_7 48 -#define GPIOA_0 49 -#define GPIOA_1 50 -#define GPIOA_2 51 -#define GPIOA_3 52 -#define GPIOA_4 53 -#define GPIOA_5 54 -#define GPIOA_6 55 -#define GPIOA_7 56 -#define GPIOA_8 57 -#define GPIOA_9 58 -#define GPIOA_10 59 -#define GPIOA_11 60 -#define GPIOA_12 61 -#define GPIOA_13 62 -#define GPIOA_14 63 -#define GPIOA_15 64 -#define GPIOX_0 65 -#define GPIOX_1 66 -#define GPIOX_2 67 -#define GPIOX_3 68 -#define GPIOX_4 69 -#define GPIOX_5 70 -#define GPIOX_6 71 -#define GPIOX_7 72 -#define GPIOX_8 73 -#define GPIOX_9 74 -#define GPIOX_10 75 -#define GPIOX_11 76 -#define GPIOX_12 77 -#define GPIOX_13 78 -#define GPIOX_14 79 -#define GPIOX_15 80 -#define GPIOX_16 81 -#define GPIOX_17 82 -#define GPIOX_18 83 -#define GPIOX_19 84 - -#endif /* _DT_BINDINGS_MESON_G12A_GPIO_H */ diff --git a/include/dt-bindings/gpio/meson-gxbb-gpio.h b/include/dt-bindings/gpio/meson-gxbb-gpio.h deleted file mode 100644 index 489c75b2764..00000000000 --- a/include/dt-bindings/gpio/meson-gxbb-gpio.h +++ /dev/null @@ -1,148 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * GPIO definitions for Amlogic Meson GXBB SoCs - * - * Copyright (C) 2016 Endless Mobile, Inc. - * Author: Carlo Caione <carlo@endlessm.com> - */ - -#ifndef _DT_BINDINGS_MESON_GXBB_GPIO_H -#define _DT_BINDINGS_MESON_GXBB_GPIO_H - -#define GPIOAO_0 0 -#define GPIOAO_1 1 -#define GPIOAO_2 2 -#define GPIOAO_3 3 -#define GPIOAO_4 4 -#define GPIOAO_5 5 -#define GPIOAO_6 6 -#define GPIOAO_7 7 -#define GPIOAO_8 8 -#define GPIOAO_9 9 -#define GPIOAO_10 10 -#define GPIOAO_11 11 -#define GPIOAO_12 12 -#define GPIOAO_13 13 -#define GPIO_TEST_N 14 - -#define GPIOZ_0 0 -#define GPIOZ_1 1 -#define GPIOZ_2 2 -#define GPIOZ_3 3 -#define GPIOZ_4 4 -#define GPIOZ_5 5 -#define GPIOZ_6 6 -#define GPIOZ_7 7 -#define GPIOZ_8 8 -#define GPIOZ_9 9 -#define GPIOZ_10 10 -#define GPIOZ_11 11 -#define GPIOZ_12 12 -#define GPIOZ_13 13 -#define GPIOZ_14 14 -#define GPIOZ_15 15 -#define GPIOH_0 16 -#define GPIOH_1 17 -#define GPIOH_2 18 -#define GPIOH_3 19 -#define BOOT_0 20 -#define BOOT_1 21 -#define BOOT_2 22 -#define BOOT_3 23 -#define BOOT_4 24 -#define BOOT_5 25 -#define BOOT_6 26 -#define BOOT_7 27 -#define BOOT_8 28 -#define BOOT_9 29 -#define BOOT_10 30 -#define BOOT_11 31 -#define BOOT_12 32 -#define BOOT_13 33 -#define BOOT_14 34 -#define BOOT_15 35 -#define BOOT_16 36 -#define BOOT_17 37 -#define CARD_0 38 -#define CARD_1 39 -#define CARD_2 40 -#define CARD_3 41 -#define CARD_4 42 -#define CARD_5 43 -#define CARD_6 44 -#define GPIODV_0 45 -#define GPIODV_1 46 -#define GPIODV_2 47 -#define GPIODV_3 48 -#define GPIODV_4 49 -#define GPIODV_5 50 -#define GPIODV_6 51 -#define GPIODV_7 52 -#define GPIODV_8 53 -#define GPIODV_9 54 -#define GPIODV_10 55 -#define GPIODV_11 56 -#define GPIODV_12 57 -#define GPIODV_13 58 -#define GPIODV_14 59 -#define GPIODV_15 60 -#define GPIODV_16 61 -#define GPIODV_17 62 -#define GPIODV_18 63 -#define GPIODV_19 64 -#define GPIODV_20 65 -#define GPIODV_21 66 -#define GPIODV_22 67 -#define GPIODV_23 68 -#define GPIODV_24 69 -#define GPIODV_25 70 -#define GPIODV_26 71 -#define GPIODV_27 72 -#define GPIODV_28 73 -#define GPIODV_29 74 -#define GPIOY_0 75 -#define GPIOY_1 76 -#define GPIOY_2 77 -#define GPIOY_3 78 -#define GPIOY_4 79 -#define GPIOY_5 80 -#define GPIOY_6 81 -#define GPIOY_7 82 -#define GPIOY_8 83 -#define GPIOY_9 84 -#define GPIOY_10 85 -#define GPIOY_11 86 -#define GPIOY_12 87 -#define GPIOY_13 88 -#define GPIOY_14 89 -#define GPIOY_15 90 -#define GPIOY_16 91 -#define GPIOX_0 92 -#define GPIOX_1 93 -#define GPIOX_2 94 -#define GPIOX_3 95 -#define GPIOX_4 96 -#define GPIOX_5 97 -#define GPIOX_6 98 -#define GPIOX_7 99 -#define GPIOX_8 100 -#define GPIOX_9 101 -#define GPIOX_10 102 -#define GPIOX_11 103 -#define GPIOX_12 104 -#define GPIOX_13 105 -#define GPIOX_14 106 -#define GPIOX_15 107 -#define GPIOX_16 108 -#define GPIOX_17 109 -#define GPIOX_18 110 -#define GPIOX_19 111 -#define GPIOX_20 112 -#define GPIOX_21 113 -#define GPIOX_22 114 -#define GPIOCLK_0 115 -#define GPIOCLK_1 116 -#define GPIOCLK_2 117 -#define GPIOCLK_3 118 - -#endif diff --git a/include/dt-bindings/gpio/meson-gxl-gpio.h b/include/dt-bindings/gpio/meson-gxl-gpio.h deleted file mode 100644 index 0a001ae4827..00000000000 --- a/include/dt-bindings/gpio/meson-gxl-gpio.h +++ /dev/null @@ -1,125 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * GPIO definitions for Amlogic Meson GXL SoCs - * - * Copyright (C) 2016 Endless Mobile, Inc. - * Author: Carlo Caione <carlo@endlessm.com> - */ - -#ifndef _DT_BINDINGS_MESON_GXL_GPIO_H -#define _DT_BINDINGS_MESON_GXL_GPIO_H - -#define GPIOAO_0 0 -#define GPIOAO_1 1 -#define GPIOAO_2 2 -#define GPIOAO_3 3 -#define GPIOAO_4 4 -#define GPIOAO_5 5 -#define GPIOAO_6 6 -#define GPIOAO_7 7 -#define GPIOAO_8 8 -#define GPIOAO_9 9 -#define GPIO_TEST_N 10 - -#define GPIOZ_0 0 -#define GPIOZ_1 1 -#define GPIOZ_2 2 -#define GPIOZ_3 3 -#define GPIOZ_4 4 -#define GPIOZ_5 5 -#define GPIOZ_6 6 -#define GPIOZ_7 7 -#define GPIOZ_8 8 -#define GPIOZ_9 9 -#define GPIOZ_10 10 -#define GPIOZ_11 11 -#define GPIOZ_12 12 -#define GPIOZ_13 13 -#define GPIOZ_14 14 -#define GPIOZ_15 15 -#define GPIOH_0 16 -#define GPIOH_1 17 -#define GPIOH_2 18 -#define GPIOH_3 19 -#define GPIOH_4 20 -#define GPIOH_5 21 -#define GPIOH_6 22 -#define GPIOH_7 23 -#define GPIOH_8 24 -#define GPIOH_9 25 -#define BOOT_0 26 -#define BOOT_1 27 -#define BOOT_2 28 -#define BOOT_3 29 -#define BOOT_4 30 -#define BOOT_5 31 -#define BOOT_6 32 -#define BOOT_7 33 -#define BOOT_8 34 -#define BOOT_9 35 -#define BOOT_10 36 -#define BOOT_11 37 -#define BOOT_12 38 -#define BOOT_13 39 -#define BOOT_14 40 -#define BOOT_15 41 -#define CARD_0 42 -#define CARD_1 43 -#define CARD_2 44 -#define CARD_3 45 -#define CARD_4 46 -#define CARD_5 47 -#define CARD_6 48 -#define GPIODV_0 49 -#define GPIODV_1 50 -#define GPIODV_2 51 -#define GPIODV_3 52 -#define GPIODV_4 53 -#define GPIODV_5 54 -#define GPIODV_6 55 -#define GPIODV_7 56 -#define GPIODV_8 57 -#define GPIODV_9 58 -#define GPIODV_10 59 -#define GPIODV_11 60 -#define GPIODV_12 61 -#define GPIODV_13 62 -#define GPIODV_14 63 -#define GPIODV_15 64 -#define GPIODV_16 65 -#define GPIODV_17 66 -#define GPIODV_18 67 -#define GPIODV_19 68 -#define GPIODV_20 69 -#define GPIODV_21 70 -#define GPIODV_22 71 -#define GPIODV_23 72 -#define GPIODV_24 73 -#define GPIODV_25 74 -#define GPIODV_26 75 -#define GPIODV_27 76 -#define GPIODV_28 77 -#define GPIODV_29 78 -#define GPIOX_0 79 -#define GPIOX_1 80 -#define GPIOX_2 81 -#define GPIOX_3 82 -#define GPIOX_4 83 -#define GPIOX_5 84 -#define GPIOX_6 85 -#define GPIOX_7 86 -#define GPIOX_8 87 -#define GPIOX_9 88 -#define GPIOX_10 89 -#define GPIOX_11 90 -#define GPIOX_12 91 -#define GPIOX_13 92 -#define GPIOX_14 93 -#define GPIOX_15 94 -#define GPIOX_16 95 -#define GPIOX_17 96 -#define GPIOX_18 97 -#define GPIOCLK_0 98 -#define GPIOCLK_1 99 - -#endif diff --git a/include/dt-bindings/power/meson-axg-power.h b/include/dt-bindings/power/meson-axg-power.h deleted file mode 100644 index e5243884b24..00000000000 --- a/include/dt-bindings/power/meson-axg-power.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ -/* - * Copyright (c) 2020 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#ifndef _DT_BINDINGS_MESON_AXG_POWER_H -#define _DT_BINDINGS_MESON_AXG_POWER_H - -#define PWRC_AXG_VPU_ID 0 -#define PWRC_AXG_ETHERNET_MEM_ID 1 -#define PWRC_AXG_AUDIO_ID 2 - -#endif diff --git a/include/dt-bindings/power/meson-g12a-power.h b/include/dt-bindings/power/meson-g12a-power.h deleted file mode 100644 index bb5e67a842d..00000000000 --- a/include/dt-bindings/power/meson-g12a-power.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#ifndef _DT_BINDINGS_MESON_G12A_POWER_H -#define _DT_BINDINGS_MESON_G12A_POWER_H - -#define PWRC_G12A_VPU_ID 0 -#define PWRC_G12A_ETH_ID 1 - -#endif diff --git a/include/dt-bindings/power/meson-gxbb-power.h b/include/dt-bindings/power/meson-gxbb-power.h deleted file mode 100644 index 1262dac696c..00000000000 --- a/include/dt-bindings/power/meson-gxbb-power.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#ifndef _DT_BINDINGS_MESON_GXBB_POWER_H -#define _DT_BINDINGS_MESON_GXBB_POWER_H - -#define PWRC_GXBB_VPU_ID 0 -#define PWRC_GXBB_ETHERNET_MEM_ID 1 - -#endif diff --git a/include/dt-bindings/power/meson-sm1-power.h b/include/dt-bindings/power/meson-sm1-power.h deleted file mode 100644 index a020ab00c13..00000000000 --- a/include/dt-bindings/power/meson-sm1-power.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#ifndef _DT_BINDINGS_MESON_SM1_POWER_H -#define _DT_BINDINGS_MESON_SM1_POWER_H - -#define PWRC_SM1_VPU_ID 0 -#define PWRC_SM1_NNA_ID 1 -#define PWRC_SM1_USB_ID 2 -#define PWRC_SM1_PCIE_ID 3 -#define PWRC_SM1_GE2D_ID 4 -#define PWRC_SM1_AUDIO_ID 5 -#define PWRC_SM1_ETH_ID 6 - -#endif diff --git a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h deleted file mode 100644 index 1ef807856cb..00000000000 --- a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0 OR MIT) - * - * Copyright (c) 2018 Baylibre SAS. - * Author: Jerome Brunet <jbrunet@baylibre.com> - */ - -#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H -#define _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H - -#define AXG_ARB_TODDR_A 0 -#define AXG_ARB_TODDR_B 1 -#define AXG_ARB_TODDR_C 2 -#define AXG_ARB_FRDDR_A 3 -#define AXG_ARB_FRDDR_B 4 -#define AXG_ARB_FRDDR_C 5 -#define AXG_ARB_TODDR_D 6 -#define AXG_ARB_FRDDR_D 7 - -#endif /* _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H */ diff --git a/include/dt-bindings/reset/amlogic,meson-axg-reset.h b/include/dt-bindings/reset/amlogic,meson-axg-reset.h deleted file mode 100644 index 0f2e0fe45ca..00000000000 --- a/include/dt-bindings/reset/amlogic,meson-axg-reset.h +++ /dev/null @@ -1,123 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ -/* - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * Copyright (c) 2017 Amlogic, inc. - * Author: Yixun Lan <yixun.lan@amlogic.com> - * - */ - -#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H -#define _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H - -/* RESET0 */ -#define RESET_HIU 0 -#define RESET_PCIE_A 1 -#define RESET_PCIE_B 2 -#define RESET_DDR_TOP 3 -/* 4 */ -#define RESET_VIU 5 -#define RESET_PCIE_PHY 6 -#define RESET_PCIE_APB 7 -/* 8 */ -/* 9 */ -#define RESET_VENC 10 -#define RESET_ASSIST 11 -/* 12 */ -#define RESET_VCBUS 13 -/* 14 */ -/* 15 */ -#define RESET_GIC 16 -#define RESET_CAPB3_DECODE 17 -/* 18-21 */ -#define RESET_SYS_CPU_CAPB3 22 -#define RESET_CBUS_CAPB3 23 -#define RESET_AHB_CNTL 24 -#define RESET_AHB_DATA 25 -#define RESET_VCBUS_CLK81 26 -#define RESET_MMC 27 -/* 28-31 */ -/* RESET1 */ -/* 32 */ -/* 33 */ -#define RESET_USB_OTG 34 -#define RESET_DDR 35 -#define RESET_AO_RESET 36 -/* 37 */ -#define RESET_AHB_SRAM 38 -/* 39 */ -/* 40 */ -#define RESET_DMA 41 -#define RESET_ISA 42 -#define RESET_ETHERNET 43 -/* 44 */ -#define RESET_SD_EMMC_B 45 -#define RESET_SD_EMMC_C 46 -#define RESET_ROM_BOOT 47 -#define RESET_SYS_CPU_0 48 -#define RESET_SYS_CPU_1 49 -#define RESET_SYS_CPU_2 50 -#define RESET_SYS_CPU_3 51 -#define RESET_SYS_CPU_CORE_0 52 -#define RESET_SYS_CPU_CORE_1 53 -#define RESET_SYS_CPU_CORE_2 54 -#define RESET_SYS_CPU_CORE_3 55 -#define RESET_SYS_PLL_DIV 56 -#define RESET_SYS_CPU_AXI 57 -#define RESET_SYS_CPU_L2 58 -#define RESET_SYS_CPU_P 59 -#define RESET_SYS_CPU_MBIST 60 -/* 61-63 */ -/* RESET2 */ -/* 64 */ -/* 65 */ -#define RESET_AUDIO 66 -/* 67 */ -#define RESET_MIPI_HOST 68 -#define RESET_AUDIO_LOCKER 69 -#define RESET_GE2D 70 -/* 71-76 */ -#define RESET_AO_CPU_RESET 77 -/* 78-95 */ -/* RESET3 */ -#define RESET_RING_OSCILLATOR 96 -/* 97-127 */ -/* RESET4 */ -/* 128 */ -/* 129 */ -#define RESET_MIPI_PHY 130 -/* 131-140 */ -#define RESET_VENCL 141 -#define RESET_I2C_MASTER_2 142 -#define RESET_I2C_MASTER_1 143 -/* 144-159 */ -/* RESET5 */ -/* 160-191 */ -/* RESET6 */ -#define RESET_PERIPHS_GENERAL 192 -#define RESET_PERIPHS_SPICC 193 -/* 194 */ -/* 195 */ -#define RESET_PERIPHS_I2C_MASTER_0 196 -/* 197-200 */ -#define RESET_PERIPHS_UART_0 201 -#define RESET_PERIPHS_UART_1 202 -/* 203-204 */ -#define RESET_PERIPHS_SPI_0 205 -#define RESET_PERIPHS_I2C_MASTER_3 206 -/* 207-223 */ -/* RESET7 */ -#define RESET_USB_DDR_0 224 -#define RESET_USB_DDR_1 225 -#define RESET_USB_DDR_2 226 -#define RESET_USB_DDR_3 227 -/* 228 */ -#define RESET_DEVICE_MMC_ARB 229 -/* 230 */ -#define RESET_VID_LOCK 231 -#define RESET_A9_DMC_PIPEL 232 -#define RESET_DMC_VPU_PIPEL 233 -/* 234-255 */ - -#endif diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h deleted file mode 100644 index f805129ca7a..00000000000 --- a/include/dt-bindings/reset/amlogic,meson-g12a-audio-reset.h +++ /dev/null @@ -1,53 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2019 BayLibre, SAS. - * Author: Jerome Brunet <jbrunet@baylibre.com> - * - */ - -#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_AUDIO_RESET_H -#define _DT_BINDINGS_AMLOGIC_MESON_G12A_AUDIO_RESET_H - -#define AUD_RESET_PDM 0 -#define AUD_RESET_TDMIN_A 1 -#define AUD_RESET_TDMIN_B 2 -#define AUD_RESET_TDMIN_C 3 -#define AUD_RESET_TDMIN_LB 4 -#define AUD_RESET_LOOPBACK 5 -#define AUD_RESET_TODDR_A 6 -#define AUD_RESET_TODDR_B 7 -#define AUD_RESET_TODDR_C 8 -#define AUD_RESET_FRDDR_A 9 -#define AUD_RESET_FRDDR_B 10 -#define AUD_RESET_FRDDR_C 11 -#define AUD_RESET_TDMOUT_A 12 -#define AUD_RESET_TDMOUT_B 13 -#define AUD_RESET_TDMOUT_C 14 -#define AUD_RESET_SPDIFOUT 15 -#define AUD_RESET_SPDIFOUT_B 16 -#define AUD_RESET_SPDIFIN 17 -#define AUD_RESET_EQDRC 18 -#define AUD_RESET_RESAMPLE 19 -#define AUD_RESET_DDRARB 20 -#define AUD_RESET_POWDET 21 -#define AUD_RESET_TORAM 22 -#define AUD_RESET_TOACODEC 23 -#define AUD_RESET_TOHDMITX 24 -#define AUD_RESET_CLKTREE 25 - -/* SM1 added resets */ -#define AUD_RESET_RESAMPLE_B 26 -#define AUD_RESET_TOVAD 27 -#define AUD_RESET_LOCKER 28 -#define AUD_RESET_SPDIFIN_LB 29 -#define AUD_RESET_FRATV 30 -#define AUD_RESET_FRHDMIRX 31 -#define AUD_RESET_FRDDR_D 32 -#define AUD_RESET_TODDR_D 33 -#define AUD_RESET_LOOPBACK_B 34 -#define AUD_RESET_EARCTX 35 -#define AUD_RESET_EARCRX 36 -#define AUD_RESET_FRDDR_E 37 -#define AUD_RESET_TODDR_E 38 - -#endif diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h deleted file mode 100644 index 6d487c5eba2..00000000000 --- a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h +++ /dev/null @@ -1,137 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ -/* - * Copyright (c) 2019 BayLibre, SAS. - * Author: Jerome Brunet <jbrunet@baylibre.com> - * - */ - -#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H -#define _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H - -/* RESET0 */ -#define RESET_HIU 0 -/* 1 */ -#define RESET_DOS 2 -/* 3-4 */ -#define RESET_VIU 5 -#define RESET_AFIFO 6 -#define RESET_VID_PLL_DIV 7 -/* 8-9 */ -#define RESET_VENC 10 -#define RESET_ASSIST 11 -#define RESET_PCIE_CTRL_A 12 -#define RESET_VCBUS 13 -#define RESET_PCIE_PHY 14 -#define RESET_PCIE_APB 15 -#define RESET_GIC 16 -#define RESET_CAPB3_DECODE 17 -/* 18 */ -#define RESET_HDMITX_CAPB3 19 -#define RESET_DVALIN_CAPB3 20 -#define RESET_DOS_CAPB3 21 -/* 22 */ -#define RESET_CBUS_CAPB3 23 -#define RESET_AHB_CNTL 24 -#define RESET_AHB_DATA 25 -#define RESET_VCBUS_CLK81 26 -/* 27-31 */ -/* RESET1 */ -/* 32 */ -#define RESET_DEMUX 33 -#define RESET_USB 34 -#define RESET_DDR 35 -/* 36 */ -#define RESET_BT656 37 -#define RESET_AHB_SRAM 38 -/* 39 */ -#define RESET_PARSER 40 -/* 41 */ -#define RESET_ISA 42 -#define RESET_ETHERNET 43 -#define RESET_SD_EMMC_A 44 -#define RESET_SD_EMMC_B 45 -#define RESET_SD_EMMC_C 46 -/* 47 */ -#define RESET_USB_PHY20 48 -#define RESET_USB_PHY21 49 -/* 50-60 */ -#define RESET_AUDIO_CODEC 61 -/* 62-63 */ -/* RESET2 */ -/* 64 */ -#define RESET_AUDIO 65 -#define RESET_HDMITX_PHY 66 -/* 67 */ -#define RESET_MIPI_DSI_HOST 68 -#define RESET_ALOCKER 69 -#define RESET_GE2D 70 -#define RESET_PARSER_REG 71 -#define RESET_PARSER_FETCH 72 -#define RESET_CTL 73 -#define RESET_PARSER_TOP 74 -/* 75-77 */ -#define RESET_DVALIN 78 -#define RESET_HDMITX 79 -/* 80-95 */ -/* RESET3 */ -/* 96-95 */ -#define RESET_DEMUX_TOP 105 -#define RESET_DEMUX_DES_PL 106 -#define RESET_DEMUX_S2P_0 107 -#define RESET_DEMUX_S2P_1 108 -#define RESET_DEMUX_0 109 -#define RESET_DEMUX_1 110 -#define RESET_DEMUX_2 111 -/* 112-127 */ -/* RESET4 */ -/* 128-129 */ -#define RESET_MIPI_DSI_PHY 130 -/* 131-132 */ -#define RESET_RDMA 133 -#define RESET_VENCI 134 -#define RESET_VENCP 135 -/* 136 */ -#define RESET_VDAC 137 -/* 138-139 */ -#define RESET_VDI6 140 -#define RESET_VENCL 141 -#define RESET_I2C_M1 142 -#define RESET_I2C_M2 143 -/* 144-159 */ -/* RESET5 */ -/* 160-191 */ -/* RESET6 */ -#define RESET_GEN 192 -#define RESET_SPICC0 193 -#define RESET_SC 194 -#define RESET_SANA_3 195 -#define RESET_I2C_M0 196 -#define RESET_TS_PLL 197 -#define RESET_SPICC1 198 -#define RESET_STREAM 199 -#define RESET_TS_CPU 200 -#define RESET_UART0 201 -#define RESET_UART1_2 202 -#define RESET_ASYNC0 203 -#define RESET_ASYNC1 204 -#define RESET_SPIFC0 205 -#define RESET_I2C_M3 206 -/* 207-223 */ -/* RESET7 */ -#define RESET_USB_DDR_0 224 -#define RESET_USB_DDR_1 225 -#define RESET_USB_DDR_2 226 -#define RESET_USB_DDR_3 227 -#define RESET_TS_GPU 228 -#define RESET_DEVICE_MMC_ARB 229 -#define RESET_DVALIN_DMC_PIPL 230 -#define RESET_VID_LOCK 231 -#define RESET_NIC_DMC_PIPL 232 -#define RESET_DMC_VPU_PIPL 233 -#define RESET_GE2D_DMC_PIPL 234 -#define RESET_HCODEC_DMC_PIPL 235 -#define RESET_WAVE420_DMC_PIPL 236 -#define RESET_HEVCF_DMC_PIPL 237 -/* 238-255 */ - -#endif diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h deleted file mode 100644 index 883bfd3bcba..00000000000 --- a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h +++ /dev/null @@ -1,161 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ -/* - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ -#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H -#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H - -/* RESET0 */ -#define RESET_HIU 0 -/* 1 */ -#define RESET_DOS_RESET 2 -#define RESET_DDR_TOP 3 -#define RESET_DCU_RESET 4 -#define RESET_VIU 5 -#define RESET_AIU 6 -#define RESET_VID_PLL_DIV 7 -/* 8 */ -#define RESET_PMUX 9 -#define RESET_VENC 10 -#define RESET_ASSIST 11 -#define RESET_AFIFO2 12 -#define RESET_VCBUS 13 -/* 14 */ -/* 15 */ -#define RESET_GIC 16 -#define RESET_CAPB3_DECODE 17 -#define RESET_NAND_CAPB3 18 -#define RESET_HDMITX_CAPB3 19 -#define RESET_MALI_CAPB3 20 -#define RESET_DOS_CAPB3 21 -#define RESET_SYS_CPU_CAPB3 22 -#define RESET_CBUS_CAPB3 23 -#define RESET_AHB_CNTL 24 -#define RESET_AHB_DATA 25 -#define RESET_VCBUS_CLK81 26 -#define RESET_MMC 27 -#define RESET_MIPI_0 28 -#define RESET_MIPI_1 29 -#define RESET_MIPI_2 30 -#define RESET_MIPI_3 31 -/* RESET1 */ -#define RESET_CPPM 32 -#define RESET_DEMUX 33 -#define RESET_USB_OTG 34 -#define RESET_DDR 35 -#define RESET_AO_RESET 36 -#define RESET_BT656 37 -#define RESET_AHB_SRAM 38 -/* 39 */ -#define RESET_PARSER 40 -#define RESET_BLKMV 41 -#define RESET_ISA 42 -#define RESET_ETHERNET 43 -#define RESET_SD_EMMC_A 44 -#define RESET_SD_EMMC_B 45 -#define RESET_SD_EMMC_C 46 -#define RESET_ROM_BOOT 47 -#define RESET_SYS_CPU_0 48 -#define RESET_SYS_CPU_1 49 -#define RESET_SYS_CPU_2 50 -#define RESET_SYS_CPU_3 51 -#define RESET_SYS_CPU_CORE_0 52 -#define RESET_SYS_CPU_CORE_1 53 -#define RESET_SYS_CPU_CORE_2 54 -#define RESET_SYS_CPU_CORE_3 55 -#define RESET_SYS_PLL_DIV 56 -#define RESET_SYS_CPU_AXI 57 -#define RESET_SYS_CPU_L2 58 -#define RESET_SYS_CPU_P 59 -#define RESET_SYS_CPU_MBIST 60 -#define RESET_ACODEC 61 -/* 62 */ -/* 63 */ -/* RESET2 */ -#define RESET_VD_RMEM 64 -#define RESET_AUDIN 65 -#define RESET_HDMI_TX 66 -/* 67 */ -/* 68 */ -/* 69 */ -#define RESET_GE2D 70 -#define RESET_PARSER_REG 71 -#define RESET_PARSER_FETCH 72 -#define RESET_PARSER_CTL 73 -#define RESET_PARSER_TOP 74 -/* 75 */ -/* 76 */ -#define RESET_AO_CPU_RESET 77 -#define RESET_MALI 78 -#define RESET_HDMI_SYSTEM_RESET 79 -/* 80-95 */ -/* RESET3 */ -#define RESET_RING_OSCILLATOR 96 -#define RESET_SYS_CPU 97 -#define RESET_EFUSE 98 -#define RESET_SYS_CPU_BVCI 99 -#define RESET_AIFIFO 100 -#define RESET_TVFE 101 -#define RESET_AHB_BRIDGE_CNTL 102 -/* 103 */ -#define RESET_AUDIO_DAC 104 -#define RESET_DEMUX_TOP 105 -#define RESET_DEMUX_DES 106 -#define RESET_DEMUX_S2P_0 107 -#define RESET_DEMUX_S2P_1 108 -#define RESET_DEMUX_RESET_0 109 -#define RESET_DEMUX_RESET_1 110 -#define RESET_DEMUX_RESET_2 111 -/* 112-127 */ -/* RESET4 */ -/* 128 */ -/* 129 */ -/* 130 */ -/* 131 */ -#define RESET_DVIN_RESET 132 -#define RESET_RDMA 133 -#define RESET_VENCI 134 -#define RESET_VENCP 135 -/* 136 */ -#define RESET_VDAC 137 -#define RESET_RTC 138 -/* 139 */ -#define RESET_VDI6 140 -#define RESET_VENCL 141 -#define RESET_I2C_MASTER_2 142 -#define RESET_I2C_MASTER_1 143 -/* 144-159 */ -/* RESET5 */ -/* 160-191 */ -/* RESET6 */ -#define RESET_PERIPHS_GENERAL 192 -#define RESET_PERIPHS_SPICC 193 -#define RESET_PERIPHS_SMART_CARD 194 -#define RESET_PERIPHS_SAR_ADC 195 -#define RESET_PERIPHS_I2C_MASTER_0 196 -#define RESET_SANA 197 -/* 198 */ -#define RESET_PERIPHS_STREAM_INTERFACE 199 -#define RESET_PERIPHS_SDIO 200 -#define RESET_PERIPHS_UART_0 201 -#define RESET_PERIPHS_UART_1_2 202 -#define RESET_PERIPHS_ASYNC_0 203 -#define RESET_PERIPHS_ASYNC_1 204 -#define RESET_PERIPHS_SPI_0 205 -#define RESET_PERIPHS_SDHC 206 -#define RESET_UART_SLIP 207 -/* 208-223 */ -/* RESET7 */ -#define RESET_USB_DDR_0 224 -#define RESET_USB_DDR_1 225 -#define RESET_USB_DDR_2 226 -#define RESET_USB_DDR_3 227 -/* 228 */ -#define RESET_DEVICE_MMC_ARB 229 -/* 230 */ -#define RESET_VID_LOCK 231 -#define RESET_A9_DMC_PIPEL 232 -/* 233-255 */ - -#endif diff --git a/include/dt-bindings/sound/meson-aiu.h b/include/dt-bindings/sound/meson-aiu.h deleted file mode 100644 index 1051b8af298..00000000000 --- a/include/dt-bindings/sound/meson-aiu.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DT_MESON_AIU_H -#define __DT_MESON_AIU_H - -#define AIU_CPU 0 -#define AIU_HDMI 1 -#define AIU_ACODEC 2 - -#define CPU_I2S_FIFO 0 -#define CPU_SPDIF_FIFO 1 -#define CPU_I2S_ENCODER 2 -#define CPU_SPDIF_ENCODER 3 - -#define CTRL_I2S 0 -#define CTRL_PCM 1 -#define CTRL_OUT 2 - -#endif /* __DT_MESON_AIU_H */ diff --git a/include/dt-bindings/sound/meson-g12a-toacodec.h b/include/dt-bindings/sound/meson-g12a-toacodec.h deleted file mode 100644 index 69d7a75592a..00000000000 --- a/include/dt-bindings/sound/meson-g12a-toacodec.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DT_MESON_G12A_TOACODEC_H -#define __DT_MESON_G12A_TOACODEC_H - -#define TOACODEC_IN_A 0 -#define TOACODEC_IN_B 1 -#define TOACODEC_IN_C 2 -#define TOACODEC_OUT 3 - -#endif /* __DT_MESON_G12A_TOACODEC_H */ diff --git a/include/dt-bindings/sound/meson-g12a-tohdmitx.h b/include/dt-bindings/sound/meson-g12a-tohdmitx.h deleted file mode 100644 index c5e1f48d30d..00000000000 --- a/include/dt-bindings/sound/meson-g12a-tohdmitx.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DT_MESON_G12A_TOHDMITX_H -#define __DT_MESON_G12A_TOHDMITX_H - -#define TOHDMITX_I2S_IN_A 0 -#define TOHDMITX_I2S_IN_B 1 -#define TOHDMITX_I2S_IN_C 2 -#define TOHDMITX_I2S_OUT 3 -#define TOHDMITX_SPDIF_IN_A 4 -#define TOHDMITX_SPDIF_IN_B 5 -#define TOHDMITX_SPDIF_OUT 6 - -#endif /* __DT_MESON_G12A_TOHDMITX_H */ diff --git a/include/turris-omnia-mcu-interface.h b/include/turris-omnia-mcu-interface.h new file mode 100644 index 00000000000..3c4638f7329 --- /dev/null +++ b/include/turris-omnia-mcu-interface.h @@ -0,0 +1,248 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CZ.NIC's Turris Omnia MCU I2C interface commands definitions + * + * 2023 by Marek Behún <kabel@kernel.org> + */ + +#ifndef __TURRIS_OMNIA_MCU_INTERFACE_H +#define __TURRIS_OMNIA_MCU_INTERFACE_H + +#include <linux/bitops.h> + +enum omnia_commands_e { + CMD_GET_STATUS_WORD = 0x01, /* slave sends status word back */ + CMD_GENERAL_CONTROL = 0x02, + CMD_LED_MODE = 0x03, /* default/user */ + CMD_LED_STATE = 0x04, /* LED on/off */ + CMD_LED_COLOR = 0x05, /* LED number + RED + GREEN + BLUE */ + CMD_USER_VOLTAGE = 0x06, + CMD_SET_BRIGHTNESS = 0x07, + CMD_GET_BRIGHTNESS = 0x08, + CMD_GET_RESET = 0x09, + CMD_GET_FW_VERSION_APP = 0x0A, /* 20B git hash number */ + CMD_SET_WATCHDOG_STATE = 0x0B, /* 0 - disable + * 1 - enable / ping + * after boot watchdog is started + * with 2 minutes timeout + */ + + /* CMD_WATCHDOG_STATUS = 0x0C, not implemented anymore */ + + CMD_GET_WATCHDOG_STATE = 0x0D, + CMD_GET_FW_VERSION_BOOT = 0x0E, /* 20B git hash number */ + CMD_GET_FW_CHECKSUM = 0x0F, /* 4B length, 4B checksum */ + + /* available if FEATURES_SUPPORTED bit set in status word */ + CMD_GET_FEATURES = 0x10, + + /* available if EXT_CMD bit set in features */ + CMD_GET_EXT_STATUS_DWORD = 0x11, + CMD_EXT_CONTROL = 0x12, + CMD_GET_EXT_CONTROL_STATUS = 0x13, + + /* available if NEW_INT_API bit set in features */ + CMD_GET_INT_AND_CLEAR = 0x14, + CMD_GET_INT_MASK = 0x15, + CMD_SET_INT_MASK = 0x16, + + /* available if FLASHING bit set in features */ + CMD_FLASH = 0x19, + + /* available if WDT_PING bit set in features */ + CMD_SET_WDT_TIMEOUT = 0x20, + CMD_GET_WDT_TIMELEFT = 0x21, + + /* available if POWEROFF_WAKEUP bit set in features */ + CMD_SET_WAKEUP = 0x22, + CMD_GET_UPTIME_AND_WAKEUP = 0x23, + CMD_POWER_OFF = 0x24, + + /* available if USB_OVC_PROT_SETTING bit set in features */ + CMD_SET_USB_OVC_PROT = 0x25, + CMD_GET_USB_OVC_PROT = 0x26, + + /* available if TRNG bit set in features */ + CMD_TRNG_COLLECT_ENTROPY = 0x28, + + /* available if CRYPTO bit set in features */ + CMD_CRYPTO_GET_PUBLIC_KEY = 0x29, + CMD_CRYPTO_SIGN_MESSAGE = 0x2A, + CMD_CRYPTO_COLLECT_SIGNATURE = 0x2B, + + /* available if BOARD_INFO it set in features */ + CMD_BOARD_INFO_GET = 0x2C, + CMD_BOARD_INFO_BURN = 0x2D, + + /* available only at address 0x2b (led-controller) */ + /* available only if LED_GAMMA_CORRECTION bit set in features */ + CMD_SET_GAMMA_CORRECTION = 0x30, + CMD_GET_GAMMA_CORRECTION = 0x31, + + /* available only at address 0x2b (led-controller) */ + /* available only if PER_LED_CORRECTION bit set in features */ + /* available only if FROM_BIT_16_INVALID bit NOT set in features */ + CMD_SET_LED_CORRECTIONS = 0x32, + CMD_GET_LED_CORRECTIONS = 0x33, +}; + +enum omnia_flashing_commands_e { + FLASH_CMD_UNLOCK = 0x01, + FLASH_CMD_SIZE_AND_CSUM = 0x02, + FLASH_CMD_PROGRAM = 0x03, + FLASH_CMD_RESET = 0x04, +}; + +enum omnia_sts_word_e { + STS_MCU_TYPE_MASK = GENMASK(1, 0), + STS_MCU_TYPE_STM32 = 0 << 0, + STS_MCU_TYPE_GD32 = 1 << 0, + STS_MCU_TYPE_MKL = 2 << 0, + STS_FEATURES_SUPPORTED = BIT(2), + STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3), + STS_CARD_DET = BIT(4), + STS_MSATA_IND = BIT(5), + STS_USB30_OVC = BIT(6), + STS_USB31_OVC = BIT(7), + STS_USB30_PWRON = BIT(8), + STS_USB31_PWRON = BIT(9), + STS_ENABLE_4V5 = BIT(10), + STS_BUTTON_MODE = BIT(11), + STS_BUTTON_PRESSED = BIT(12), + STS_BUTTON_COUNTER_MASK = GENMASK(15, 13) +}; + +enum omnia_ctl_byte_e { + CTL_LIGHT_RST = BIT(0), + CTL_HARD_RST = BIT(1), + /* BIT(2) is currently reserved */ + CTL_USB30_PWRON = BIT(3), + CTL_USB31_PWRON = BIT(4), + CTL_ENABLE_4V5 = BIT(5), + CTL_BUTTON_MODE = BIT(6), + CTL_BOOTLOADER = BIT(7) +}; + +enum omnia_features_e { + FEAT_PERIPH_MCU = BIT(0), + FEAT_EXT_CMDS = BIT(1), + FEAT_WDT_PING = BIT(2), + FEAT_LED_STATE_EXT_MASK = GENMASK(4, 3), + FEAT_LED_STATE_EXT = 1 << 3, + FEAT_LED_STATE_EXT_V32 = 2 << 3, + FEAT_LED_GAMMA_CORRECTION = BIT(5), + FEAT_NEW_INT_API = BIT(6), + FEAT_BOOTLOADER = BIT(7), + FEAT_FLASHING = BIT(8), + FEAT_NEW_MESSAGE_API = BIT(9), + FEAT_BRIGHTNESS_INT = BIT(10), + FEAT_POWEROFF_WAKEUP = BIT(11), + FEAT_CAN_OLD_MESSAGE_API = BIT(12), + FEAT_TRNG = BIT(13), + FEAT_CRYPTO = BIT(14), + FEAT_BOARD_INFO = BIT(15), + + /* + * Orginally the features command replied only 16 bits. If more were + * read, either the I2C transaction failed or 0xff bytes were sent. + * Therefore to consider bits 16 - 31 valid, one bit (20) was reserved + * to be zero. + */ + + /* Bits 16 - 19 correspond to bits 0 - 3 of status word */ + FEAT_MCU_TYPE_MASK = GENMASK(17, 16), + FEAT_MCU_TYPE_STM32 = 0 << 16, + FEAT_MCU_TYPE_GD32 = 1 << 16, + FEAT_MCU_TYPE_MKL = 2 << 16, + FEAT_FEATURES_SUPPORTED = BIT(18), + FEAT_USER_REGULATOR_NOT_SUPPORTED = BIT(19), + + /* must not be set */ + FEAT_FROM_BIT_16_INVALID = BIT(20), + + FEAT_PER_LED_CORRECTION = BIT(21), + FEAT_USB_OVC_PROT_SETTING = BIT(22), +}; + +enum omnia_ext_sts_dword_e { + EXT_STS_SFP_nDET = BIT(0), + EXT_STS_LED_STATES_MASK = GENMASK(31, 12), + EXT_STS_WLAN0_MSATA_LED = BIT(12), + EXT_STS_WLAN1_LED = BIT(13), + EXT_STS_WLAN2_LED = BIT(14), + EXT_STS_WPAN0_LED = BIT(15), + EXT_STS_WPAN1_LED = BIT(16), + EXT_STS_WPAN2_LED = BIT(17), + EXT_STS_WAN_LED0 = BIT(18), + EXT_STS_WAN_LED1 = BIT(19), + EXT_STS_LAN0_LED0 = BIT(20), + EXT_STS_LAN0_LED1 = BIT(21), + EXT_STS_LAN1_LED0 = BIT(22), + EXT_STS_LAN1_LED1 = BIT(23), + EXT_STS_LAN2_LED0 = BIT(24), + EXT_STS_LAN2_LED1 = BIT(25), + EXT_STS_LAN3_LED0 = BIT(26), + EXT_STS_LAN3_LED1 = BIT(27), + EXT_STS_LAN4_LED0 = BIT(28), + EXT_STS_LAN4_LED1 = BIT(29), + EXT_STS_LAN5_LED0 = BIT(30), + EXT_STS_LAN5_LED1 = BIT(31), +}; + +enum omnia_ext_ctl_e { + EXT_CTL_nRES_MMC = BIT(0), + EXT_CTL_nRES_LAN = BIT(1), + EXT_CTL_nRES_PHY = BIT(2), + EXT_CTL_nPERST0 = BIT(3), + EXT_CTL_nPERST1 = BIT(4), + EXT_CTL_nPERST2 = BIT(5), + EXT_CTL_PHY_SFP = BIT(6), + EXT_CTL_PHY_SFP_AUTO = BIT(7), + EXT_CTL_nVHV_CTRL = BIT(8), +}; + +enum omnia_int_e { + INT_CARD_DET = BIT(0), + INT_MSATA_IND = BIT(1), + INT_USB30_OVC = BIT(2), + INT_USB31_OVC = BIT(3), + INT_BUTTON_PRESSED = BIT(4), + INT_SFP_nDET = BIT(5), + INT_BRIGHTNESS_CHANGED = BIT(6), + INT_TRNG = BIT(7), + INT_MESSAGE_SIGNED = BIT(8), + + INT_LED_STATES_MASK = GENMASK(31, 12), + INT_WLAN0_MSATA_LED = BIT(12), + INT_WLAN1_LED = BIT(13), + INT_WLAN2_LED = BIT(14), + INT_WPAN0_LED = BIT(15), + INT_WPAN1_LED = BIT(16), + INT_WPAN2_LED = BIT(17), + INT_WAN_LED0 = BIT(18), + INT_WAN_LED1 = BIT(19), + INT_LAN0_LED0 = BIT(20), + INT_LAN0_LED1 = BIT(21), + INT_LAN1_LED0 = BIT(22), + INT_LAN1_LED1 = BIT(23), + INT_LAN2_LED0 = BIT(24), + INT_LAN2_LED1 = BIT(25), + INT_LAN3_LED0 = BIT(26), + INT_LAN3_LED1 = BIT(27), + INT_LAN4_LED0 = BIT(28), + INT_LAN4_LED1 = BIT(29), + INT_LAN5_LED0 = BIT(30), + INT_LAN5_LED1 = BIT(31), +}; + +enum omnia_cmd_poweroff_e { + CMD_POWER_OFF_POWERON_BUTTON = BIT(0), + CMD_POWER_OFF_MAGIC = 0xdead, +}; + +enum cmd_usb_ovc_prot_e { + CMD_xET_USB_OVC_PROT_PORT_MASK = GENMASK(3, 0), + CMD_xET_USB_OVC_PROT_ENABLE = BIT(4), +}; + +#endif /* __TURRIS_OMNIA_MCU_INTERFACE_H */ |