diff options
105 files changed, 2987 insertions, 638 deletions
@@ -3,7 +3,7 @@ VERSION = 2025 PATCHLEVEL = 10 SUBLEVEL = -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = # *DOCUMENTATION* diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ff8f1ed1ac0..7c8cf3a5a1d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -124,6 +124,8 @@ dtb-$(CONFIG_ARCH_TEGRA) += \ tegra30-wexler-qc750.dtb \ tegra114-asus-tf701t.dtb \ tegra114-dalmore.dtb \ + tegra114-microsoft-surface-2-0b.dtb \ + tegra114-microsoft-surface-2-13.dtb \ tegra114-nvidia-tegratab.dtb \ tegra124-apalis.dtb \ tegra124-jetson-tk1.dtb \ diff --git a/arch/arm/dts/px30-u-boot.dtsi b/arch/arm/dts/px30-u-boot.dtsi index 157d0ea6930..2f726b0aaba 100644 --- a/arch/arm/dts/px30-u-boot.dtsi +++ b/arch/arm/dts/px30-u-boot.dtsi @@ -27,6 +27,10 @@ }; }; +&otp { + bootph-some-ram; +}; + &uart2 { clock-frequency = <24000000>; bootph-all; diff --git a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi index 582d6ba49b4..c47d29c59de 100644 --- a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi +++ b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi @@ -4,7 +4,7 @@ */ #include "rk3328-u-boot.dtsi" -#include "rk3328-sdram-ddr4-666.dtsi" +#include "rk3328-sdram-ddr4-1600.dtsi" / { smbios { diff --git a/arch/arm/dts/rk3328-sdram-ddr4-1600.dtsi b/arch/arm/dts/rk3328-sdram-ddr4-1600.dtsi new file mode 100644 index 00000000000..9594bb42839 --- /dev/null +++ b/arch/arm/dts/rk3328-sdram-ddr4-1600.dtsi @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd. + +&dmc { + rockchip,sdram-params = < + 0x1 + 0xA + 0x2 + 0x1 + 0x0 + 0x0 + 0x11 + 0x0 + 0x11 + 0x0 + 0 + + 0x94496354 + 0x00000000 + 0x0000002a + 0x000004e2 + 0x00000015 + 0x0000034a + 0x000000ff + + 800 + 0 + 1 + 0 + 0 + + 0x00000000 + 0x43041010 + 0x00000064 + 0x0061008c + 0x000000d0 + 0x000200c5 + 0x000000d4 + 0x00500000 + 0x000000d8 + 0x00000100 + 0x000000dc + 0x03140401 + 0x000000e0 + 0x00000000 + 0x000000e4 + 0x00110000 + 0x000000e8 + 0x00000420 + 0x000000ec + 0x00000400 + 0x000000f4 + 0x000f011f + 0x00000100 + 0x0c0e1b0e + 0x00000104 + 0x00030314 + 0x00000108 + 0x0506050b + 0x0000010c + 0x0040400c + 0x00000110 + 0x06030307 + 0x00000114 + 0x04040302 + 0x00000120 + 0x06060b06 + 0x00000124 + 0x00020308 + 0x00000180 + 0x01000040 + 0x00000184 + 0x00000000 + 0x00000190 + 0x07040003 + 0x00000198 + 0x05001100 + 0x000001a0 + 0xc0400003 + 0x00000240 + 0x0600060c + 0x00000244 + 0x00000201 + 0x00000250 + 0x00000f00 + 0x00000490 + 0x00000001 + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + 0xffffffff + + 0x00000004 + 0x0000000c + 0x00000028 + 0x0000000c + 0x0000002c + 0x00000000 + 0x00000030 + 0x00000009 + 0xffffffff + 0xffffffff + + 0x77 + 0x88 + 0x79 + 0x79 + 0x87 + 0x97 + 0x87 + 0x78 + 0x77 + 0x78 + 0x87 + 0x88 + 0x87 + 0x87 + 0x77 + + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x69 + 0x9 + + 0x77 + 0x78 + 0x77 + 0x78 + 0x77 + 0x78 + 0x77 + 0x78 + 0x77 + 0x79 + 0x9 + + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x69 + 0x9 + + 0x77 + 0x78 + 0x77 + 0x77 + 0x77 + 0x77 + 0x77 + 0x77 + 0x77 + 0x79 + 0x9 + + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x69 + 0x9 + + 0x77 + 0x78 + 0x77 + 0x78 + 0x77 + 0x78 + 0x77 + 0x78 + 0x77 + 0x79 + 0x9 + + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x78 + 0x69 + 0x9 + + 0x77 + 0x78 + 0x77 + 0x77 + 0x77 + 0x77 + 0x77 + 0x77 + 0x77 + 0x79 + 0x9 + >; +}; diff --git a/arch/arm/dts/rk3528-generic-u-boot.dtsi b/arch/arm/dts/rk3528-generic-u-boot.dtsi index cc830b51456..9e1fb2a7eef 100644 --- a/arch/arm/dts/rk3528-generic-u-boot.dtsi +++ b/arch/arm/dts/rk3528-generic-u-boot.dtsi @@ -1,12 +1,3 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include "rk3528-u-boot.dtsi" - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - disable-wp; - no-mmc; - no-sdio; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3528-generic.dts b/arch/arm/dts/rk3528-generic.dts index 3f6f0bed108..637ca03325e 100644 --- a/arch/arm/dts/rk3528-generic.dts +++ b/arch/arm/dts/rk3528-generic.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Minimal generic DT for RK3528 with eMMC enabled + * Minimal generic DT for RK3528 with eMMC and SD-card enabled */ /dts-v1/; @@ -10,6 +10,12 @@ model = "Generic RK3528"; compatible = "rockchip,rk3528"; + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + serial0 = &uart0; + }; + chosen { stdout-path = "serial0:1500000n8"; }; @@ -25,6 +31,15 @@ status = "okay"; }; +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + no-mmc; + no-sdio; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0m0_xfer>; diff --git a/arch/arm/dts/rk3528-radxa-e20c-u-boot.dtsi b/arch/arm/dts/rk3528-radxa-e20c-u-boot.dtsi index 1372d8f1e38..16c47e6b9a9 100644 --- a/arch/arm/dts/rk3528-radxa-e20c-u-boot.dtsi +++ b/arch/arm/dts/rk3528-radxa-e20c-u-boot.dtsi @@ -6,11 +6,10 @@ mmc-hs200-1_8v; }; -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - vmmc-supply = <&vcc_3v3>; - status = "okay"; +&vdd_arm { + regulator-init-microvolt = <953000>; +}; + +&vdd_logic { + regulator-init-microvolt = <900000>; }; diff --git a/arch/arm/dts/rk3528-u-boot.dtsi b/arch/arm/dts/rk3528-u-boot.dtsi index eb6a55cd5c9..a18d33b3d36 100644 --- a/arch/arm/dts/rk3528-u-boot.dtsi +++ b/arch/arm/dts/rk3528-u-boot.dtsi @@ -27,24 +27,6 @@ compatible = "rockchip,rk3528-otp"; reg = <0x0 0xffce0000 0x0 0x4000>; }; - - sdmmc: mmc@ffc30000 { - compatible = "rockchip,rk3528-dw-mshc", - "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xffc30000 0x0 0x4000>; - clocks = <&cru HCLK_SDMMC0>, <&cru CCLK_SRC_SDMMC0>; - clock-names = "biu", "ciu"; - fifo-depth = <0x100>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_bus4>, <&sdmmc_clk>, <&sdmmc_cmd>, - <&sdmmc_det>; - resets = <&cru SRST_H_SDMMC0>; - reset-names = "reset"; - rockchip,default-sample-phase = <90>; - status = "disabled"; - }; }; }; diff --git a/arch/arm/dts/rk3576-armsom-sige5-u-boot.dtsi b/arch/arm/dts/rk3576-armsom-sige5-u-boot.dtsi new file mode 100644 index 00000000000..7e0530d85d1 --- /dev/null +++ b/arch/arm/dts/rk3576-armsom-sige5-u-boot.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include "rk3576-u-boot.dtsi" + +/ { + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; +}; + +&red_led { + default-state = "on"; +}; + +&sdhci { + cap-mmc-highspeed; +}; diff --git a/arch/arm/dts/rk3576-generic-u-boot.dtsi b/arch/arm/dts/rk3576-generic-u-boot.dtsi new file mode 100644 index 00000000000..632fabb6af5 --- /dev/null +++ b/arch/arm/dts/rk3576-generic-u-boot.dtsi @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include "rk3576-u-boot.dtsi" diff --git a/arch/arm/dts/rk3576-generic.dts b/arch/arm/dts/rk3576-generic.dts new file mode 100644 index 00000000000..123be5378d9 --- /dev/null +++ b/arch/arm/dts/rk3576-generic.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Minimal generic DT for RK3576 with eMMC, SD-card and USB OTG enabled + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "rk3576.dtsi" + +/ { + model = "Generic RK3576"; + compatible = "rockchip,rk3576"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + no-mmc; + no-sdio; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0m0_xfer>; + status = "okay"; +}; + +&usb_drd0_dwc3 { + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3576-u-boot.dtsi b/arch/arm/dts/rk3576-u-boot.dtsi index be99a48a630..fb5a107f47d 100644 --- a/arch/arm/dts/rk3576-u-boot.dtsi +++ b/arch/arm/dts/rk3576-u-boot.dtsi @@ -49,6 +49,10 @@ bootph-all; }; +&otp { + bootph-some-ram; +}; + &pcfg_pull_none { bootph-all; }; diff --git a/arch/arm/dts/rk3588-generic-u-boot.dtsi b/arch/arm/dts/rk3588-generic-u-boot.dtsi index f67301d87a6..853ed58cfe5 100644 --- a/arch/arm/dts/rk3588-generic-u-boot.dtsi +++ b/arch/arm/dts/rk3588-generic-u-boot.dtsi @@ -1,21 +1,3 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include "rk3588s-u-boot.dtsi" - -&u2phy0 { - status = "okay"; -}; - -&u2phy0_otg { - status = "okay"; -}; - -&usbdp_phy0 { - status = "okay"; -}; - -&usb_host0_xhci { - dr_mode = "peripheral"; - maximum-speed = "high-speed"; - status = "okay"; -}; diff --git a/arch/arm/dts/rk3588-generic.dts b/arch/arm/dts/rk3588-generic.dts index 95d757676f1..6740f9866f1 100644 --- a/arch/arm/dts/rk3588-generic.dts +++ b/arch/arm/dts/rk3588-generic.dts @@ -39,7 +39,23 @@ status = "okay"; }; +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; + +&usb_host0_xhci { + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588-orangepi-5-ultra-u-boot.dtsi b/arch/arm/dts/rk3588-orangepi-5-ultra-u-boot.dtsi new file mode 100644 index 00000000000..1ab31a4ec5a --- /dev/null +++ b/arch/arm/dts/rk3588-orangepi-5-ultra-u-boot.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include "rk3588-u-boot.dtsi" + +&fspim1_pins { + bootph-pre-ram; + bootph-some-ram; +}; + +&sdhci { + cap-mmc-highspeed; + mmc-hs200-1_8v; +}; + +&sfc { + flash@0 { + bootph-pre-ram; + bootph-some-ram; + }; +}; diff --git a/arch/arm/dts/tegra114-microsoft-surface-2-0b.dts b/arch/arm/dts/tegra114-microsoft-surface-2-0b.dts new file mode 100644 index 00000000000..2007aae8737 --- /dev/null +++ b/arch/arm/dts/tegra114-microsoft-surface-2-0b.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra114-microsoft-surface-2-common.dtsi" + +/ { + backlight: backlight { + enable-gpios = <&gpio TEGRA_GPIO(CC, 2) GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/dts/tegra114-microsoft-surface-2-13.dts b/arch/arm/dts/tegra114-microsoft-surface-2-13.dts new file mode 100644 index 00000000000..da121d5a101 --- /dev/null +++ b/arch/arm/dts/tegra114-microsoft-surface-2-13.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra114-microsoft-surface-2-common.dtsi" + +/ { + backlight: backlight { + enable-gpios = <&gpio TEGRA_GPIO(EE, 3) GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/dts/tegra114-microsoft-surface-2-common.dtsi b/arch/arm/dts/tegra114-microsoft-surface-2-common.dtsi new file mode 100644 index 00000000000..f8f71262538 --- /dev/null +++ b/arch/arm/dts/tegra114-microsoft-surface-2-common.dtsi @@ -0,0 +1,905 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/input/input.h> +#include "tegra114.dtsi" + +/ { + model = "Microsoft Surface 2"; + compatible = "microsoft,surface-2", "nvidia,tegra114"; + + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = &pwr_i2c; + + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc3; /* uSD slot */ + + usb0 = &usb1; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + host1x@50000000 { + dsia: dsi@54300000 { + status = "okay"; + + avdd-dsi-csi-supply = <&avdd_dsi_csi>; + + panel@0 { + compatible = "samsung,ltl106hl02-001"; + reg = <0>; + + vdd-supply = <&tps65090_fet4>; + + backlight = <&backlight>; + }; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* ULPI pinmux */ + ulpi-data0 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data3_po4", + "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi-data1 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi-data2 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi-data7 { + nvidia,pins = "ulpi_data7_po0", + "ulpi_data5_po6", + "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* I2S pinmux */ + dap1-din { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1-dout { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap2-i2s1 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3-i2s2 { + nvidia,pins = "dap3_fs_pp0", + "dap3_din_pp1", + "dap3_dout_pp2", + "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4-din { + nvidia,pins = "dap4_fs_pp4", + "dap4_din_pp5", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4-dout { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* SDMMC1 pinmux */ + sdmmc1-wp-clk { + nvidia,pins = "sdmmc1_wp_n_pv3", + "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1-cmd { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat3_py4", + "sdmmc1_dat2_py5", + "sdmmc1_dat1_py6", + "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* SDMMC3 pinmux */ + sdmmc3-clk { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3-cmd { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat3_pb4", + "sdmmc3_dat2_pb5", + "sdmmc3_dat1_pb6", + "sdmmc3_dat0_pb7", + "sdmmc3_cd_n_pv2", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3-clk-lb-out { + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* SDMMC4 pinmux */ + sdmmc4-clk { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4-cmd { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* HDMI pinmux */ + hdmi-int { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + hdmi-cec { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* I2C pinmux */ + gen1-i2c { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2-i2c { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + cam-i2c { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + ddc-scl-pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + pwr-i2c { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* UARTA pinmux */ + uarta-out { + nvidia,pins = "pu0", "pu3"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uarta-in { + nvidia,pins = "pu1", "pu2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* UARTB pinmux */ + uart2-txd-pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2-rxd-pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2-cts-n-pj5 { + nvidia,pins = "uart2_cts_n_pj5", + "uart2_rts_n_pj6"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* UARTC pinmux */ + uart3-cts-rxd { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3-rts-txd { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* UARTD pinmux */ + uartd-out { + nvidia,pins = "ulpi_clk_py0", + "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uartd-in { + nvidia,pins = "ulpi_dir_py1", + "ulpi_nxt_py2"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* GMI section */ + gmi-a17 { + nvidia,pins = "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_iordy_pi5", + "kb_col1_pq1", + "kb_row8_ps0", + "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi-wp-n { + nvidia,pins = "gmi_wp_n_pc7", + "gmi_cs0_n_pj0", + "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi-ad0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_oe_n_pi1", + "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi-ad8 { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-ad9 { + nvidia,pins = "gmi_ad9_ph1", + "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad15_ph7", + "gmi_cs4_n_pk2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-ad12 { + nvidia,pins = "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gpio_x1_aud_px1", + "pcc1", + "clk3_req_pee1", + "clk1_req_pee2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-ad14 { + nvidia,pins = "gmi_ad14_ph6", + "gmi_a16_pj7", + "gmi_a19_pk7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi-wr-n { + nvidia,pins = "gmi_wr_n_pi0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi-cs6-n { + nvidia,pins = "gmi_cs6_n_pi3", + "gmi_cs7_n_pi6"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi-rst-n { + nvidia,pins = "gmi_rst_n_pi4", + "spdif_out_pk5", + "spdif_in_pk6", + "clk2_out_pw5", + "dvfs_pwm_px0", + "dvfs_clk_px2", + "pbb7", + "pcc2", + "clk2_req_pcc5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-wait { + nvidia,pins = "gmi_wait_pi7"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs1-n { + nvidia,pins = "gmi_cs1_n_pj2"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi-dqs-p { + nvidia,pins = "gmi_dqs_p_pj3"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi-adv-n { + nvidia,pins = "gmi_adv_n_pk0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-clk { + nvidia,pins = "gmi_clk_pk1", + "gmi_cs2_n_pk3", + "gmi_cs3_n_pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + jtag-rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* KBC pinmux */ + kb-col0 { + nvidia,pins = "kb_col0_pq0", + "kb_col3_pq3", + "kb_col4_pq4", + "kb_row4_pr4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb-col2 { + nvidia,pins = "kb_col2_pq2", + "kb_col6_pq6", + "kb_col7_pq7", + "kb_row0_pr0", + "kb_row2_pr2", + "pv0", + "sys_clk_req_pz5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb-col5 { + nvidia,pins = "kb_col5_pq5", + "kb_row5_pr5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb-row1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb-row3 { + nvidia,pins = "kb_row3_pr3", + "kb_row9_ps1"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row7 { + nvidia,pins = "kb_row7_pr7", + "pbb3", + "pbb4", + "pbb5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row10 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* CORE pinmux */ + clk-32k-out { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk-32k-in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + core-pwr-req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cpu-pwr-req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr-int-n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + reset-out-n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* AUD pinmux */ + gpio-w2-aud { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio-w3-aud { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio-x3-aud { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio-x4-aud { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio-x5-aud { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio-x6-aud { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb0 { + nvidia,pins = "pbb0", + "cam_mclk_pcc0"; + nvidia,function = "vi_alt1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + clk1-out { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk3-out { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* USB pinmux */ + usb-vbus-en0 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + usb-vbus-en1 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + uarta: serial@70006000 { + status = "okay"; + }; + + pwm: pwm@7000a000 { + status = "okay"; + }; + + pwr_i2c: i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + /* Texas Instruments TPS65090 PMIC */ + tps65090@48 { + compatible = "ti,tps65090"; + reg = <0x48>; + + regulators { + tps65090_fet1: fet1 { + regulator-name = "vcd_led"; + regulator-boot-on; + }; + + tps65090_fet4: fet4 { + regulator-name = "vdd_lcd"; + regulator-boot-on; + }; + + tps65090_fet6: fet6 { + regulator-name = "vdd_usd"; + regulator-boot-on; + }; + }; + }; + + /* Texas Instruments TPS65913 PMIC */ + pmic: tps65913@58 { + compatible = "ti,tps65913"; + reg = <0x58>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + pmic { + compatible = "ti,tps65913-pmic"; + + regulators { + vdd_1v8_vio: smps8 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <5000>; + }; + + avdd_dsi_csi: ldo3 { + regulator-name = "avdd_dsi_csi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + }; + + vddio_usd: ldo9 { + regulator-name = "vddio_usd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + }; + + sdmmc3: sdhci@78000400 { + status = "okay"; + bus-width = <4>; + + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + + nvidia,default-tap = <0x3>; + nvidia,default-trim = <0x3>; + + vmmc-supply = <&tps65090_fet6>; + vqmmc-supply = <&vddio_usd>; + }; + + sdmmc4: sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + usb1: usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + nvidia,vbus-gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + }; + + usb-phy@7d000000 { + status = "okay"; + + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + power-supply = <&tps65090_fet1>; + pwms = <&pwm 0 1000000>; + + brightness-levels = <1 35 70 105 140 175 210 255>; + default-brightness-level = <5>; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + extcon-keys { + compatible = "gpio-keys"; + + switch-hall-sensor { + label = "Hall Sensor"; + gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_HIGH>; + linux,code = <SW_LID>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power Button"; + gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>; + linux,code = <KEY_ENTER>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = <KEY_DOWN>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_UP>; + }; + + key-windows { + label = "Windows Button"; + gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_HIGH>; + linux,code = <KEY_ENTER>; + }; + }; +}; diff --git a/arch/arm/dts/tegra20-asus-sl101.dts b/arch/arm/dts/tegra20-asus-sl101.dts index b4709c3e9a4..9f78b0febf3 100644 --- a/arch/arm/dts/tegra20-asus-sl101.dts +++ b/arch/arm/dts/tegra20-asus-sl101.dts @@ -6,4 +6,14 @@ / { model = "ASUS EeePad Slider SL101"; compatible = "asus,sl101", "nvidia,tegra20"; + + extcon-keys { + compatible = "gpio-keys"; + + switch-tablet-mode { + label = "Tablet Mode"; + gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>; + linux,code = <SW_TABLET_MODE>; + }; + }; }; diff --git a/arch/arm/dts/tegra20-asus-tf101.dts b/arch/arm/dts/tegra20-asus-tf101.dts index 7c734fb5b19..03ba78c5dc2 100644 --- a/arch/arm/dts/tegra20-asus-tf101.dts +++ b/arch/arm/dts/tegra20-asus-tf101.dts @@ -6,4 +6,14 @@ / { model = "ASUS EeePad Transformer TF101"; compatible = "asus,tf101", "nvidia,tegra20"; + + extcon-keys { + compatible = "gpio-keys"; + + switch-dock-hall-sensor { + label = "Lid sensor"; + gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + }; + }; }; diff --git a/arch/arm/dts/tegra20-asus-tf101g.dts b/arch/arm/dts/tegra20-asus-tf101g.dts index f49a358a267..44d5fdfc2b5 100644 --- a/arch/arm/dts/tegra20-asus-tf101g.dts +++ b/arch/arm/dts/tegra20-asus-tf101g.dts @@ -6,4 +6,14 @@ / { model = "ASUS EeePad Transformer TF101G"; compatible = "asus,tf101g", "nvidia,tegra20"; + + extcon-keys { + compatible = "gpio-keys"; + + switch-dock-hall-sensor { + label = "Lid sensor"; + gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + }; + }; }; diff --git a/arch/arm/dts/tegra20-asus-transformer.dtsi b/arch/arm/dts/tegra20-asus-transformer.dtsi index 61b1cea6e90..df078a6fcdc 100644 --- a/arch/arm/dts/tegra20-asus-transformer.dtsi +++ b/arch/arm/dts/tegra20-asus-transformer.dtsi @@ -497,12 +497,6 @@ gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; }; - - switch-dock-hall-sensor { - label = "Lid sensor"; - gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>; - linux,code = <SW_LID>; - }; }; panel: panel { diff --git a/arch/arm/dts/tegra210-p3450-0000.dts b/arch/arm/dts/tegra210-p3450-0000.dts index 9ef744ac8b0..ddeeb232de2 100644 --- a/arch/arm/dts/tegra210-p3450-0000.dts +++ b/arch/arm/dts/tegra210-p3450-0000.dts @@ -124,7 +124,14 @@ spi@70410000 { status = "okay"; - spi-max-frequency = <80000000>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; }; usb@7d000000 { diff --git a/arch/arm/dts/tegra210.dtsi b/arch/arm/dts/tegra210.dtsi index 28ecd2b467a..92eb4f67bf5 100644 --- a/arch/arm/dts/tegra210.dtsi +++ b/arch/arm/dts/tegra210.dtsi @@ -762,10 +762,10 @@ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car TEGRA210_CLK_QSPI>; - clock-names = "qspi"; + clocks = <&tegra_car TEGRA210_CLK_QSPI>, + <&tegra_car TEGRA210_CLK_QSPI_PM>; + clock-names = "qspi", "qspi_out"; resets = <&tegra_car 211>; - reset-names = "qspi"; dmas = <&apbdma 5>, <&apbdma 5>; dma-names = "rx", "tx"; status = "disabled"; diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 7eb764e1f4e..ca4cec61f22 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -183,7 +183,7 @@ __weak void setup_board_tags(struct tag **in_params) {} static void do_nonsec_virt_switch(void) { smp_kick_all_cpus(); - dcache_disable(); /* flush cache before swtiching to EL2 */ + dcache_disable(); /* flush cache before switching to EL2 */ } #endif diff --git a/arch/arm/mach-rockchip/px30/px30.c b/arch/arm/mach-rockchip/px30/px30.c index 8ce9ac561f0..5a5c119328f 100644 --- a/arch/arm/mach-rockchip/px30/px30.c +++ b/arch/arm/mach-rockchip/px30/px30.c @@ -2,10 +2,14 @@ /* * Copyright (c) 2017 Rockchip Electronics Co., Ltd */ + +#define LOG_CATEGORY LOGC_ARCH + #include <clk.h> #include <dm.h> #include <fdt_support.h> #include <init.h> +#include <misc.h> #include <spl.h> #include <asm/armv8/mmu.h> #include <asm/arch-rockchip/bootrom.h> @@ -15,6 +19,7 @@ #include <asm/arch-rockchip/clock.h> #include <asm/arch-rockchip/cru_px30.h> #include <dt-bindings/clock/px30-cru.h> +#include <linux/bitfield.h> const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/mmc@ff390000", @@ -442,3 +447,59 @@ void board_debug_uart_init(void) #endif /* CONFIG_DEBUG_UART_BASE && CONFIG_DEBUG_UART_BASE == ... */ } #endif /* CONFIG_DEBUG_UART_BOARD_INIT */ + +#define PX30_OTP_SPECIFICATION_OFFSET 0x06 + +#define DDR_GRF_BASE_ADDR 0xff630000 +#define DDR_GRF_CON(n) (0 + (n) * 4) + +int checkboard(void) +{ + struct udevice *dev; + u8 specification; + u32 base_soc; + int ret; + + if (!IS_ENABLED(CONFIG_ROCKCHIP_OTP) || !CONFIG_IS_ENABLED(MISC)) + return 0; + + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_DRIVER_GET(rockchip_otp), &dev); + if (ret) { + log_debug("Could not find otp device, ret=%d\n", ret); + return 0; + } + + /* base SoC: 0x26334b52 for RK3326; 0x30335850 for PX30 */ + ret = misc_read(dev, 0, &base_soc, 4); + if (ret < 0) { + log_debug("Could not read specification, ret=%d\n", ret); + return 0; + } + + if (base_soc != 0x26334b52 && base_soc != 0x30335850) { + log_debug("Could not identify SoC, got 0x%04x in OTP\n", base_soc); + return 0; + } + + /* SoC variant: 0x21 for PX30/PX30S/RK3326/RK3326S; 0x2b for PX30K */ + ret = misc_read(dev, PX30_OTP_SPECIFICATION_OFFSET, &specification, 1); + if (ret < 0) { + log_debug("Could not read specification, ret=%d\n", ret); + return 0; + } + + if (specification == 0x2b) { + printf("SoC: PX30K\n"); + return 0; + } + + /* From vendor kernel: drivers/soc/rockchip/rockchip-cpuinfo.c */ + specification = FIELD_GET(GENMASK(15, 14), + readl(DDR_GRF_BASE_ADDR + DDR_GRF_CON(1))); + log_debug("DDR specification is %d\n", specification); + printf("SoC: %s%s\n", base_soc == 0x26334b52 ? "RK3326" : "PX30", + specification == 0x3 ? "S" : ""); + + return 0; +} diff --git a/arch/arm/mach-rockchip/rk3528/rk3528.c b/arch/arm/mach-rockchip/rk3528/rk3528.c index 4892ff6ba9d..f9bfc445b85 100644 --- a/arch/arm/mach-rockchip/rk3528/rk3528.c +++ b/arch/arm/mach-rockchip/rk3528/rk3528.c @@ -9,6 +9,9 @@ #include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/hardware.h> +#define VPU_GRF_BASE 0xff340000 +#define USB3OTG_CON1 0x44 + #define FIREWALL_DDR_BASE 0xff2e0000 #define FW_DDR_MST6_REG 0x58 #define FW_DDR_MST7_REG 0x5c @@ -69,6 +72,9 @@ int arch_cpu_init(void) val = readl(FIREWALL_DDR_BASE + FW_DDR_MST16_REG); writel(val & 0xffff0000, FIREWALL_DDR_BASE + FW_DDR_MST16_REG); + /* Disable USB3OTG U3 port, later enabled in COMBPHY driver */ + writel(0xffff0181, VPU_GRF_BASE + USB3OTG_CON1); + return 0; } diff --git a/arch/arm/mach-rockchip/rk3576/MAINTAINERS b/arch/arm/mach-rockchip/rk3576/MAINTAINERS new file mode 100644 index 00000000000..94ef74d429f --- /dev/null +++ b/arch/arm/mach-rockchip/rk3576/MAINTAINERS @@ -0,0 +1,11 @@ +GENERIC-RK3576 +M: Jonas Karlman <jonas@kwiboo.se> +S: Maintained +F: arch/arm/dts/rk3576-generic* +F: configs/generic-rk3576_defconfig + +SIGE5-RK3576 +M: Jonas Karlman <jonas@kwiboo.se> +S: Maintained +F: arch/arm/dts/rk3576-armsom-sige5* +F: configs/sige5-rk3576_defconfig diff --git a/arch/arm/mach-rockchip/rk3576/rk3576.c b/arch/arm/mach-rockchip/rk3576/rk3576.c index ba5c94b4b3d..a6c2fbdc484 100644 --- a/arch/arm/mach-rockchip/rk3576/rk3576.c +++ b/arch/arm/mach-rockchip/rk3576/rk3576.c @@ -3,6 +3,10 @@ * Copyright (c) 2024 Rockchip Electronics Co., Ltd */ +#define LOG_CATEGORY LOGC_ARCH + +#include <dm.h> +#include <misc.h> #include <asm/armv8/mmu.h> #include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/hardware.h> @@ -29,6 +33,9 @@ #define SGRF_DOMAIN_CON4 0x10 #define SGRF_DOMAIN_CON5 0x14 +#define USB_GRF_BASE 0x2601E000 +#define USB3OTG0_CON1 0x0030 + const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_EMMC] = "/soc/mmc@2a330000", [BROM_BOOTSOURCE_SD] = "/soc/mmc@2a310000", @@ -151,5 +158,52 @@ int arch_cpu_init(void) */ writel(0xffffff00, SYS_SGRF_BASE + SYS_SGRF_SOC_CON20); + /* Disable USB3OTG0 U3 port, later enabled by USBDP PHY driver */ + writel(0xffff0188, USB_GRF_BASE + USB3OTG0_CON1); + + return 0; +} + +#define RK3576_OTP_CPU_CODE_OFFSET 0x02 +#define RK3576_OTP_SPECIFICATION_OFFSET 0x08 + +int checkboard(void) +{ + u8 cpu_code[2], specification; + struct udevice *dev; + char suffix[2]; + int ret; + + if (!IS_ENABLED(CONFIG_ROCKCHIP_OTP) || !CONFIG_IS_ENABLED(MISC)) + return 0; + + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_DRIVER_GET(rockchip_otp), &dev); + if (ret) { + log_debug("Could not find otp device, ret=%d\n", ret); + return 0; + } + + /* cpu-code: SoC model, e.g. 0x35 0x76 */ + ret = misc_read(dev, RK3576_OTP_CPU_CODE_OFFSET, cpu_code, 2); + if (ret < 0) { + log_debug("Could not read cpu-code, ret=%d\n", ret); + return 0; + } + + /* specification: SoC variant, e.g. 0xA for RK3576J */ + ret = misc_read(dev, RK3576_OTP_SPECIFICATION_OFFSET, &specification, 1); + if (ret < 0) { + log_debug("Could not read specification, ret=%d\n", ret); + return 0; + } + specification &= 0x1f; + + /* for RK3576J i.e. '@' + 0xA = 'J' */ + suffix[0] = specification > 1 ? '@' + specification : '\0'; + suffix[1] = '\0'; + + printf("SoC: RK%02x%02x%s\n", cpu_code[0], cpu_code[1], suffix); + return 0; } diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig index 4e7942ada87..9fbe3f225aa 100644 --- a/arch/arm/mach-rockchip/rk3588/Kconfig +++ b/arch/arm/mach-rockchip/rk3588/Kconfig @@ -27,6 +27,23 @@ config TARGET_CM3588_NAS_RK3588 - 3.5mm Headphone out, 2.0mm PH-2A Mic in - 5V Fan connector, PWM beeper, IR receiver, RTC battery connector +config TARGET_GAMEFORCE_ACE_RK3588S + bool "GameForce Ace" + help + The GameForce Ace is a handheld game console from GameForce with + the Rockchip RK3588S SoC. + + Hardware features: + - Rockchip RK3588S SoC + - 12GB LPDDR4x RAM + - 128GB eMMC + - MicroSD card slot + - 1x USB 3.0 Type-C with DP AltMode support + - 1x HDMI 2.1 micro-HDMI out + - 1920x1080 touchscreen MIPI-DSI panel + - Analog joysticks and L/R triggers + - 16 digital buttons + config TARGET_GENBOOK_CM5_RK3588 bool "Cool Pi CM5 GenBook" help @@ -410,6 +427,7 @@ source "board/friendlyelec/cm3588-nas-rk3588/Kconfig" source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" source "board/friendlyelec/nanopi-r6c-rk3588s/Kconfig" source "board/friendlyelec/nanopi-r6s-rk3588s/Kconfig" +source "board/gameforce/ace-rk3588s/Kconfig" source "board/hardkernel/odroid_m2/Kconfig" source "board/indiedroid/nova/Kconfig" source "board/khadas/khadas-edge2-rk3588s/Kconfig" diff --git a/arch/arm/mach-rockchip/rk3588/rk3588.c b/arch/arm/mach-rockchip/rk3588/rk3588.c index e2278ff792b..c01a4002089 100644 --- a/arch/arm/mach-rockchip/rk3588/rk3588.c +++ b/arch/arm/mach-rockchip/rk3588/rk3588.c @@ -15,6 +15,10 @@ #include <asm/arch-rockchip/hardware.h> #include <asm/arch-rockchip/ioc_rk3588.h> +#define USB_GRF_BASE 0xfd5ac000 +#define USB3OTG0_CON1 0x001c +#define USB3OTG1_CON1 0x0034 + #define FIREWALL_DDR_BASE 0xfe030000 #define FW_DDR_MST5_REG 0x54 #define FW_DDR_MST13_REG 0x74 @@ -184,6 +188,10 @@ int arch_cpu_init(void) /* Disable JTAG exposed on SDMMC */ rk_clrreg(&sys_grf->soc_con[6], SYS_GRF_FORCE_JTAG); #endif + + /* Disable USB3OTG U3 ports, later enabled by USBDP PHY driver */ + writel(0xffff0188, USB_GRF_BASE + USB3OTG0_CON1); + writel(0xffff0188, USB_GRF_BASE + USB3OTG1_CON1); #endif return 0; diff --git a/arch/arm/mach-tegra/tegra114/Kconfig b/arch/arm/mach-tegra/tegra114/Kconfig index 98f1d0e71c1..43dd59fb113 100644 --- a/arch/arm/mach-tegra/tegra114/Kconfig +++ b/arch/arm/mach-tegra/tegra114/Kconfig @@ -8,6 +8,10 @@ config TARGET_DALMORE bool "NVIDIA Tegra114 Dalmore evaluation board" select BOARD_LATE_INIT +config TARGET_SURFACE_2 + bool "Microsoft Surface 2" + select BOARD_LATE_INIT + config TARGET_TEGRATAB bool "NVIDIA Tegra114 TegraTab evaluation board" select BOARD_LATE_INIT @@ -22,6 +26,7 @@ config SYS_SOC default "tegra114" source "board/nvidia/dalmore/Kconfig" +source "board/microsoft/surface-2/Kconfig" source "board/nvidia/tegratab/Kconfig" source "board/asus/transformer-t114/Kconfig" diff --git a/board/asus/transformer-t20/configs/sl101.config b/board/asus/transformer-t20/configs/sl101.config index 4f639e1b412..87c6f7a216d 100644 --- a/board/asus/transformer-t20/configs/sl101.config +++ b/board/asus/transformer-t20/configs/sl101.config @@ -1 +1,2 @@ +CONFIG_ENV_SOURCE_FILE="sl101" CONFIG_DEFAULT_DEVICE_TREE="tegra20-asus-sl101" diff --git a/board/asus/transformer-t20/sl101.env b/board/asus/transformer-t20/sl101.env new file mode 100644 index 00000000000..f2bf298a997 --- /dev/null +++ b/board/asus/transformer-t20/sl101.env @@ -0,0 +1,15 @@ +#include <env/nvidia/prod_upd.env> + +button_cmd_0_name=Volume Down +button_cmd_0=bootmenu +partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs} +boot_dev=1 + +bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu +bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu +bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu +bootmenu_3=update bootloader=run flash_uboot +bootmenu_4=reboot RCM=enterrcm +bootmenu_5=reboot=reset +bootmenu_6=power off=poweroff +bootmenu_delay=-1 diff --git a/board/gameforce/ace-rk3588s/Kconfig b/board/gameforce/ace-rk3588s/Kconfig new file mode 100644 index 00000000000..52f98ccf897 --- /dev/null +++ b/board/gameforce/ace-rk3588s/Kconfig @@ -0,0 +1,9 @@ +if TARGET_GAMEFORCE_ACE_RK3588S + +config SYS_BOARD + default "gameforce-ace-rk3588s" + +config SYS_VENDOR + default "GameForce" + +endif diff --git a/board/gameforce/ace-rk3588s/MAINTAINERS b/board/gameforce/ace-rk3588s/MAINTAINERS new file mode 100644 index 00000000000..dc18e7c8849 --- /dev/null +++ b/board/gameforce/ace-rk3588s/MAINTAINERS @@ -0,0 +1,5 @@ +GAMEFORCE-ACE-RK3588S +M: Chris Morgan <macromorgan@hotmail.com> +S: Maintained +F: board/gameforce/ace-rk3588s/ +F: configs/gameforce-ace-rk3588s_defconfig diff --git a/board/microsoft/surface-2/Kconfig b/board/microsoft/surface-2/Kconfig new file mode 100644 index 00000000000..8573666dc92 --- /dev/null +++ b/board/microsoft/surface-2/Kconfig @@ -0,0 +1,13 @@ +if TARGET_SURFACE_2 + +config SYS_BOARD + default "surface-2" + +config SYS_VENDOR + default "microsoft" + +config TEGRA_BOARD_STRING + string "Default Tegra board name" + default "Microsoft Surface 2" + +endif diff --git a/board/microsoft/surface-2/MAINTAINERS b/board/microsoft/surface-2/MAINTAINERS new file mode 100644 index 00000000000..57747d304cd --- /dev/null +++ b/board/microsoft/surface-2/MAINTAINERS @@ -0,0 +1,7 @@ +SURFACE_2 BOARD +M: Jonas Schwöbel <jonasschwoebel@yahoo.de> +S: Maintained +F: arch/arm/dts/tegra114-microsoft-surface-2* +F: board/microsoft/surface-2/ +F: configs/surface-2_defconfig +F: doc/board/microsoft/surface-2.rst diff --git a/board/microsoft/surface-2/Makefile b/board/microsoft/surface-2/Makefile new file mode 100644 index 00000000000..43bf6c66db2 --- /dev/null +++ b/board/microsoft/surface-2/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + +obj-$(CONFIG_XPL_BUILD) += surface-2-spl.o +obj-$(CONFIG_MULTI_DTB_FIT) += board-info.o diff --git a/board/microsoft/surface-2/board-info.c b/board/microsoft/surface-2/board-info.c new file mode 100644 index 00000000000..95a4accdc90 --- /dev/null +++ b/board/microsoft/surface-2/board-info.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2025 + * Svyatoslav Ryhel <clamor95@gmail.com> + */ + +#include <stdio.h> +#include <env.h> +#include <spl_gpio.h> + +#include <asm/gpio.h> +#include <asm/arch/pinmux.h> +#include <linux/string.h> + +static int id_gpio_get_value(u32 pingrp, u32 pin) +{ + /* Configure pinmux */ + pinmux_set_func(pingrp, PMUX_FUNC_KBC); + pinmux_set_pullupdown(pingrp, PMUX_PULL_DOWN); + pinmux_tristate_enable(pingrp); + pinmux_set_io(pingrp, PMUX_PIN_INPUT); + + /* + * Since this function may be called + * during DM reload we should use SPL + * GPIO functions which do not depend + * on DM. + */ + spl_gpio_input(NULL, pin); + return spl_gpio_get_value(NULL, pin); +} + +static int get_board_id(void) +{ + u32 pcb_id0, pcb_id1, pcb_id2, pcb_id3, pcb_id4, board_id; + + pcb_id0 = id_gpio_get_value(PMUX_PINGRP_KB_COL0_PQ0, TEGRA_GPIO(Q, 0)); + pcb_id1 = id_gpio_get_value(PMUX_PINGRP_KB_COL1_PQ1, TEGRA_GPIO(Q, 1)); + pcb_id2 = id_gpio_get_value(PMUX_PINGRP_KB_COL2_PQ2, TEGRA_GPIO(Q, 2)); + pcb_id3 = id_gpio_get_value(PMUX_PINGRP_KB_COL3_PQ3, TEGRA_GPIO(Q, 3)); + pcb_id4 = id_gpio_get_value(PMUX_PINGRP_KB_COL4_PQ4, TEGRA_GPIO(Q, 4)); + + /* Construct board ID */ + board_id = pcb_id4 << 4 | pcb_id3 << 3 | pcb_id2 << 2 | pcb_id1 << 1 | pcb_id0; + + log_debug("[SURFACE-2]: Board ID %02x\n", board_id); + + return board_id & 0x1f; +} + +int board_fit_config_name_match(const char *name) +{ + char dt_name[64] = { 0 }; + + snprintf(dt_name, sizeof(dt_name), "tegra114-microsoft-surface-2-%02x.dtb", + get_board_id()); + + if (!strcmp(name, dt_name)) + return 0; + + return -1; +} + +void nvidia_board_late_init(void) +{ + char dt_path[64] = { 0 }; + + snprintf(dt_path, sizeof(dt_path), "tegra114-microsoft-surface-2-%02x.dtb", + get_board_id()); + env_set("fdtfile", dt_path); +} diff --git a/board/microsoft/surface-2/surface-2-spl.c b/board/microsoft/surface-2/surface-2-spl.c new file mode 100644 index 00000000000..16f4373c7f0 --- /dev/null +++ b/board/microsoft/surface-2/surface-2-spl.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Surface 2 SPL stage configuration + * + * (C) Copyright 2010-2013 + * NVIDIA Corporation <www.nvidia.com> + * + * (C) Copyright 2023 + * Svyatoslav Ryhel <clamor95@gmail.com> + */ + +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/tegra_i2c.h> +#include <linux/delay.h> + +#define TPS65913_I2C_ADDR (0x58 << 1) + +#define TPS65913_SMPS12_CTRL 0x20 +#define TPS65913_SMPS12_VOLTAGE 0x23 +#define TPS65913_SMPS45_CTRL 0x28 +#define TPS65913_SMPS45_VOLTAGE 0x2B + +#define TPS65913_SMPS12_CTRL_DATA (0x5100 | TPS65913_SMPS12_CTRL) +#define TPS65913_SMPS12_VOLTAGE_DATA (0x3900 | TPS65913_SMPS12_VOLTAGE) +#define TPS65913_SMPS45_CTRL_DATA (0x5100 | TPS65913_SMPS45_CTRL) +#define TPS65913_SMPS45_VOLTAGE_DATA (0x4c00 | TPS65913_SMPS45_VOLTAGE) + +void pmic_enable_cpu_vdd(void) +{ + /* Set CORE VDD to 1.200V. */ + tegra_i2c_ll_write(TPS65913_I2C_ADDR, TPS65913_SMPS45_VOLTAGE_DATA); + udelay(1000); + tegra_i2c_ll_write(TPS65913_I2C_ADDR, TPS65913_SMPS45_CTRL_DATA); + + udelay(1000); + + /* Set CPU VDD to 1.0125V. */ + tegra_i2c_ll_write(TPS65913_I2C_ADDR, TPS65913_SMPS12_VOLTAGE_DATA); + udelay(1000); + tegra_i2c_ll_write(TPS65913_I2C_ADDR, TPS65913_SMPS12_CTRL_DATA); + udelay(10 * 1000); +} diff --git a/board/microsoft/surface-2/surface-2.env b/board/microsoft/surface-2/surface-2.env new file mode 100644 index 00000000000..a77885a7c6d --- /dev/null +++ b/board/microsoft/surface-2/surface-2.env @@ -0,0 +1,8 @@ +button_cmd_0_name=Volume Down +button_cmd_0=bootmenu + +bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu +bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu +bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu +bootmenu_4=power off=reset +bootmenu_delay=-1 diff --git a/board/rockchip/evb_rk3588/MAINTAINERS b/board/rockchip/evb_rk3588/MAINTAINERS index 1232f05a387..379c85f48a4 100644 --- a/board/rockchip/evb_rk3588/MAINTAINERS +++ b/board/rockchip/evb_rk3588/MAINTAINERS @@ -48,3 +48,9 @@ S: Maintained F: configs/orangepi-5-plus-rk3588_defconfig F: arch/arm/dts/rk3588-orangepi-5-plus.dts F: arch/arm/dts/rk3588-orangepi-5-plus-u-boot.dtsi + +ORANGEPI-5-RK3588-ULTRA +M: Niu Zhihong <zhihong@nzhnb.com> +S: Maintained +F: configs/orangepi-5-ultra-rk3588_defconfig +F: arch/arm/dts/rk3588-orangepi-5-ultra-u-boot.dtsi diff --git a/board/theobroma-systems/jaguar_rk3588/jaguar_rk3588.c b/board/theobroma-systems/jaguar_rk3588/jaguar_rk3588.c index a6d44f10db3..3f484646701 100644 --- a/board/theobroma-systems/jaguar_rk3588/jaguar_rk3588.c +++ b/board/theobroma-systems/jaguar_rk3588/jaguar_rk3588.c @@ -51,3 +51,22 @@ int rockchip_early_misc_init_r(void) return 0; } + +#define GPIO0B7_PU_EN BIT(15) + +void spl_board_init(void) +{ + /* + * GPIO0_B7 is routed to CAN TX. This SoC pin has a pull-down per default. + * So on power-up, we block the CAN bus with a dominant zero. We want to keep + * this blocking time to a minimum, so we want to get this pin high in SPL. + * + * The CAN driver in Linux disables the pull-down and sets the pin to + * output high. We don't have a CAN driver in U-Boot and don't need one, + * so we just use the easiest way to get the pin high, which is setting a + * pull-up. + */ + struct rk3588_pmu2_ioc * const ioc = (void *)PMU2_IOC_BASE; + + rk_setreg(&ioc->gpio0b_p, GPIO0B7_PU_EN); +} diff --git a/board/ti/am57xx/Kconfig b/board/ti/am57xx/Kconfig index 0c566820158..b6943938391 100644 --- a/board/ti/am57xx/Kconfig +++ b/board/ti/am57xx/Kconfig @@ -9,6 +9,18 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "am57xx_evm" +config ENV_SOURCE_FILE + default "am57xx" + +source "board/ti/common/Kconfig" + +endif + +if TARGET_DRA7XX_EVM + +config ENV_SOURCE_FILE + default "am57xx" + source "board/ti/common/Kconfig" endif diff --git a/board/ti/am57xx/am57xx.env b/board/ti/am57xx/am57xx.env new file mode 100644 index 00000000000..7d029a3e859 --- /dev/null +++ b/board/ti/am57xx/am57xx.env @@ -0,0 +1,162 @@ +#include <env/ti/ti_common.env> +#include <env/ti/mmc.env> +#include <env/ti/dfu.env> + +bootpart=0:2 +bootdir=/boot +get_name_kern= + if test $boot_fit -eq 1; then + setenv bootfile fitImage; + else + setenv bootfile zImage; + fi +get_fit_config=setenv name_fit_config ${fdtfile} +console=ttyS2,115200n8 +fdtfile=undefined +finduuid=part uuid mmc 0:2 uuid +usbtty=cdc_acm +vram=16M + +#if CONFIG_CMD_AVB +avb_verify=avb init 1; avb verify $slot_suffix; +#endif + +partitions=uuid_disk=${uuid_gpt_disk}; + name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader}; + name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs} + partitions_android= + uuid_disk=${uuid_gpt_disk}; + name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader}; + name=bootloader,size=2048K,uuid=${uuid_gpt_bootloader}; + name=uboot-env,start=2432K,size=256K,uuid=${uuid_gpt_reserved}; + name=misc,size=128K,uuid=${uuid_gpt_misc}; + name=boot_a,size=20M,uuid=${uuid_gpt_boot_a}; + name=boot_b,size=20M,uuid=${uuid_gpt_boot_b}; + name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a}; + name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b}; + name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a}; + name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b}; + name=recovery,size=64M,uuid=${uuid_gpt_recovery}; + name=super,size=2560M,uuid=${uuid_gpt_super}; + name=metadata,size=16M,uuid=${uuid_gpt_metadata}; + name=userdata,size=-,uuid=${uuid_gpt_userdata} +optargs= +dofastboot=0 +emmc_android_boot= + setenv mmcdev 1; + mmc dev $mmcdev; + mmc rescan; +#if CONFIG_CMD_BCB +#if CONFIG_ANDROID_AB + if part number mmc 1 misc control_part_number; then + echo "misc partition number:${control_part_number};" + bcb ab_select slot_name mmc ${mmcdev}:${control_part_number}; + else + echo "misc partition not found;" + exit; + fi; + setenv slot_suffix _${slot_name}; +#endif +#endif +if bcb load CONFIG_FASTBOOT_FLASH_MMC_DEV misc; then + setenv ardaddr -; + if bcb test command = bootonce-bootloader; then + echo "Android: Bootloader boot..."; + bcb clear command; bcb store; + fastboot 1; + exit; + elif bcb test command = boot-recovery; then + echo "Android: Recovery boot..."; + setenv ardaddr $loadaddr; + setenv apart recovery; + else + echo "Android: Normal boot..."; + setenv ardaddr $loadaddr; + setenv apart boot${slot_suffix}; + fi; +else + echo "Warning: BCB is corrupted or does not exist"; + echo "Android: Normal boot..."; +fi; +setenv eval_bootargs setenv bootargs $bootargs; +run eval_bootargs; +setenv machid fe6; +#if CONFIG_CMD_AVB +if run avb_verify; then + echo "AVB verification OK."; + set bootargs $bootargs $avb_bootargs; +else + echo "AVB verification failed."; + exit; +fi; +#endif +#if CONFIG_CMD_BCB +#if CONFIG_ANDROID_AB +setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; +echo "A/B cmdline addition: ${bootargs_ab}"; +setenv bootargs ${bootargs} ${bootargs_ab}; +#endif +#endif +if part start mmc $mmcdev $apart boot_start; then + part size mmc $mmcdev $apart boot_size; + mmc read $loadaddr $boot_start $boot_size; + echo "Preparing FDT..."; + if test $board_name = am57xx_evm_reva3; then + echo " Reading DTBO partition..."; + part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; + part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; + mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; + echo " Reading DTB for AM57x EVM RevA3..."; + abootimg get dtb --index=0 dtb_start dtb_size; + cp.b $dtb_start $fdtaddr $dtb_size; + fdt addr $fdtaddr 0x80000; + echo " Applying DTBOs for AM57x EVM RevA3..."; + adtimg addr $dtboaddr; + adtimg get dt --index=0 dtbo0_addr dtbo0_size; + fdt apply $dtbo0_addr; + adtimg get dt --index=1 dtbo1_addr dtbo1_size; + fdt apply $dtbo1_addr; + elif test $board_name = beagle_x15_revc; then + echo " Reading DTB for Beagle X15 RevC..."; + abootimg get dtb --index=0 dtb_start dtb_size; + cp.b $dtb_start $fdtaddr $dtb_size; + fdt addr $fdtaddr 0x80000; + else + echo "Error: Android boot is not supported for $board_name"; + exit; + fi; + bootm $loadaddr $ardaddr $fdtaddr; +else + echo "$apart partition not found"; + exit; +fi; +get_overlay_mmc= + fdt address ${fdtaddr}; + fdt resize 0x100000; + for overlay in $name_overlays; + do; + load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/${overlay}; + fdt apply ${dtboaddr}; + done; +#if CONFIG_CMD_NET +static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off +nfsopts=nolock +rootpath=/export/rootfs +netloadimage=tftp ${loadaddr} ${bootfile} +netloadfdt=tftp ${fdtaddr} ${fdtfile} +netargs=setenv bootargs console=${console} ${optargs} + root=/dev/nfs + nfsroot=${serverip}:${rootpath},${nfsopts} rw + ip=dhcp +netboot=echo Booting from network ...; + setenv autoload no; + dhcp; + run netloadimage; + run netloadfdt; + run netargs; + bootz ${loadaddr} - ${fdtaddr} +#endif +#if CONFIG_MTD_RAW_NAND +#include <env/ti/nand.env> +#endif +dfu_bufsiz=0x10000 diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index fc0d87daae4..4091601d4f2 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -42,6 +42,7 @@ #include "../common/board_detect.h" #include "../common/cape_detect.h" +#include "../common/fdt_ops.h" #include "mux_data.h" #ifdef CONFIG_SUPPORT_EMMC_BOOT @@ -577,6 +578,18 @@ void do_board_detect(void) "Board: %s REV %s\n", bname, board_ti_get_rev()); } +static struct ti_fdt_map ti_omap_am57_evm_fdt_map[] = { + {"beagle_x15", "ti/omap/am57xx-beagle-x15.dtb"}, + {"beagle_x15_revb1", "ti/omap/am57xx-beagle-x15-revb1.dtb"}, + {"beagle_x15_revc", "ti/omap/am57xx-beagle-x15-revc.dtb"}, + {"am5729_beagleboneai", "ti/omap/am5729-beagleboneai.dtb"}, + {"am572x_idk", "ti/omap/am572x-idk.dtb"}, + {"am574x_idk", "ti/omap/am574x-idk.dtb"}, + {"am57xx_evm", "ti/omap/am57xx-beagle-x15.dtb"}, + {"am57xx_evm_reva3", "ti/omap/am57xx-beagle-x15.dtb"}, + {"am571x_idk", "ti/omap/am571x-idk.dtb"}, +}; + static void setup_board_eeprom_env(void) { char *name = "beagle_x15"; @@ -614,6 +627,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom: set_board_info_env(name); + ti_set_fdt_env(name, ti_omap_am57_evm_fdt_map); } #endif /* CONFIG_XPL_BUILD */ diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 98d63e14e29..0966db2bb62 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -38,6 +38,7 @@ #include "mux_data.h" #include "../common/board_detect.h" +#include "../common/fdt_ops.h" #define board_is_dra76x_evm() board_ti_is("DRA76/7x") #define board_is_dra74x_evm() board_ti_is("5777xCPU") @@ -665,6 +666,15 @@ static int device_okay(const char *path) } #endif +static struct ti_fdt_map ti_omap_dra7_evm_fdt_map[] = { + {"omap5_uevm", "ti/omap/omap5-uevm.dtb"}, + {"dra7xx", "ti/omap/dra7-evm.dtb"}, + {"dra72x-revc", "ti/omap/dra72-evm-revc.dtb"}, + {"dra72x", "ti/omap/dra72-evm.dtb"}, + {"dra71x", "ti/omap/dra71-evm.dtb"}, + {"dra76x_acd", "ti/omap/dra76-evm.dtb"}, +}; + int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -686,6 +696,7 @@ int board_late_init(void) } set_board_info_env(name); + ti_set_fdt_env(name, ti_omap_dra7_evm_fdt_map); /* * Default FIT boot on HS devices. Non FIT images are not allowed diff --git a/board/xunlong/orangepi-5-ultra-rk3588/Kconfig b/board/xunlong/orangepi-5-ultra-rk3588/Kconfig new file mode 100644 index 00000000000..43fc96b04c0 --- /dev/null +++ b/board/xunlong/orangepi-5-ultra-rk3588/Kconfig @@ -0,0 +1,12 @@ +if TARGET_ORANGEPI_5_ULTRA_RK3588 + +config SYS_BOARD + default "orangepi-5-ultra-rk3588" + +config SYS_VENDOR + default "xunlong" + +config SYS_CONFIG_NAME + default "evb_rk3588" + +endif diff --git a/board/xunlong/orangepi-5-ultra-rk3588/MAINTAINERS b/board/xunlong/orangepi-5-ultra-rk3588/MAINTAINERS new file mode 100644 index 00000000000..be9c93f6b9d --- /dev/null +++ b/board/xunlong/orangepi-5-ultra-rk3588/MAINTAINERS @@ -0,0 +1,6 @@ +ORANGEPI-5-RK3588-ULTRA +M: Niu Zhihong <zhihong@nzhnb.com> +S: Maintained +F: board/xunlong/orangepi-5-rk3588-ultra +F: configs/orangepi-5-ultra-rk3588_defconfig +F: arch/arm/dts/rk3588-orangepi-5-ultra.dts diff --git a/common/spl/Kconfig b/common/spl/Kconfig index ab05536bd02..f34b96efc02 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1141,7 +1141,7 @@ config SPL_DM_SPI config SPL_DM_SPI_FLASH bool "Support SPI DM FLASH drivers in SPL" - depends on SPL_DM + depends on SPL_DM_SPI help Enable support for SPI DM flash drivers in SPL. diff --git a/configs/coreboot_defconfig b/configs/coreboot_defconfig index dfb97a3d302..b49fc80167b 100644 --- a/configs/coreboot_defconfig +++ b/configs/coreboot_defconfig @@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="coreboot" CONFIG_PRE_CON_BUF_ADDR=0x100000 CONFIG_VENDOR_COREBOOT=y CONFIG_TARGET_COREBOOT=y +CONFIG_X86_LOAD_FROM_32_BIT=y CONFIG_SYS_MONITOR_BASE=0x01110000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y diff --git a/configs/gameforce-ace-rk3588s_defconfig b/configs/gameforce-ace-rk3588s_defconfig new file mode 100644 index 00000000000..ec725a8df40 --- /dev/null +++ b/configs/gameforce-ace-rk3588s_defconfig @@ -0,0 +1,67 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-gameforce-ace" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_SPL_SERIAL=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-gameforce-ace.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_ATF=y +CONFIG_CMD_MMC=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_NO_NET=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_BUTTON=y +CONFIG_BUTTON_ADC=y +CONFIG_BUTTON_GPIO=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +# CONFIG_RAM_ROCKCHIP_DEBUG is not set +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_ERRNO_STR=y diff --git a/configs/generic-rk3576_defconfig b/configs/generic-rk3576_defconfig new file mode 100644 index 00000000000..5e25653820c --- /dev/null +++ b/configs/generic-rk3576_defconfig @@ -0,0 +1,50 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_DEFAULT_DEVICE_TREE="rk3576-generic" +CONFIG_ROCKCHIP_RK3576=y +CONFIG_SYS_LOAD_ADDR=0x40c00800 +CONFIG_DEBUG_UART_BASE=0x2AD40000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +# CONFIG_BOOTMETH_VBE is not set +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3576-generic.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0x40000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMINFO_MAP=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MISC=y +CONFIG_CMD_MMC=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_RNG=y +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_OF_UPSTREAM is not set +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_NO_NET=y +# CONFIG_ADC is not set +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSRESET_PSCI=y +CONFIG_USB=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=y diff --git a/configs/generic-rk3588_defconfig b/configs/generic-rk3588_defconfig index ed2f936b324..dfa8efabe6b 100644 --- a/configs/generic-rk3588_defconfig +++ b/configs/generic-rk3588_defconfig @@ -53,7 +53,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y -CONFIG_PHY_ROCKCHIP_USBDP=y CONFIG_SPL_PINCTRL=y CONFIG_SPL_RAM=y CONFIG_BAUDRATE=1500000 diff --git a/configs/jaguar-rk3588_defconfig b/configs/jaguar-rk3588_defconfig index 13cff7b1a02..3ed07d18e10 100644 --- a/configs/jaguar-rk3588_defconfig +++ b/configs/jaguar-rk3588_defconfig @@ -27,6 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-jaguar.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CYCLIC=y CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_ATF=y # CONFIG_BOOTM_NETBSD is not set @@ -34,6 +35,7 @@ CONFIG_SPL_ATF=y # CONFIG_BOOTM_RTEMS is not set # CONFIG_BOOTM_VXWORKS is not set # CONFIG_CMD_ELF is not set +CONFIG_CMD_ERASEENV=y CONFIG_CMD_ADC=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig index 8e5e7e3e1e5..1653ab8b44f 100644 --- a/configs/nanopi-r5s-rk3568_defconfig +++ b/configs/nanopi-r5s-rk3568_defconfig @@ -28,6 +28,8 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y # CONFIG_SPL_DOS_PARTITION is not set @@ -38,6 +40,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_REGMAP=y CONFIG_SPL_SYSCON=y CONFIG_SPL_CLK=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y @@ -73,4 +76,8 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y +CONFIG_SPL_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y CONFIG_ERRNO_STR=y diff --git a/configs/orangepi-5-ultra-rk3588_defconfig b/configs/orangepi-5-ultra-rk3588_defconfig new file mode 100644 index 00000000000..f3274325922 --- /dev/null +++ b/configs/orangepi-5-ultra-rk3588_defconfig @@ -0,0 +1,88 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SF_DEFAULT_SPEED=80000000 +CONFIG_SF_DEFAULT_MODE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-orangepi-5-ultra" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_ROCKCHIP_SPI_IMAGE=y +CONFIG_SPL_SERIAL=y +CONFIG_TARGET_EVB_RK3588=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_SF_DEFAULT_BUS=5 +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-orangepi-5-ultra.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_XMC=y +CONFIG_PHYLIB=y +CONFIG_RTL8169=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SFC=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_ERRNO_STR=y diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig index a002178b7fb..2ebcf8b83fc 100644 --- a/configs/p3450-0000_defconfig +++ b/configs/p3450-0000_defconfig @@ -18,13 +18,21 @@ CONFIG_TEGRA210=y CONFIG_TARGET_P3450_0000=y CONFIG_TEGRA_GPU=y CONFIG_PCI=y +CONFIG_HAS_BOARD_SIZE_LIMIT=y +CONFIG_BOARD_SIZE_LIMIT=753664 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_PBSIZE=2089 CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra210 (P3450-0000) # " +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_GO is not set # CONFIG_CMD_IMI is not set +# CONFIG_CRC32_VERIFY is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y @@ -53,7 +61,6 @@ CONFIG_RTL8169=y CONFIG_NVME_PCI=y CONFIG_PCI_TEGRA=y CONFIG_SYS_NS16550=y -CONFIG_TEGRA114_SPI=y CONFIG_TEGRA210_QSPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 817d4fe1d64..2070d534232 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -36,6 +36,7 @@ CONFIG_TPL_GPIO=y # CONFIG_BOOTM_RTEMS is not set # CONFIG_CMD_VBE is not set # CONFIG_BOOTM_VXWORKS is not set +CONFIG_CMD_ERASEENV=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y diff --git a/configs/r8a779g3_sparrowhawk_defconfig b/configs/r8a779g3_sparrowhawk_defconfig index 9cee4d287ef..2d1abf6f26d 100644 --- a/configs/r8a779g3_sparrowhawk_defconfig +++ b/configs/r8a779g3_sparrowhawk_defconfig @@ -18,7 +18,7 @@ CONFIG_SYS_BARGSIZE=2048 CONFIG_SYS_CBSIZE=2048 CONFIG_BAUDRATE=921600 CONFIG_BINMAN=y -CONFIG_BOOTCOMMAND="tftp 0x50000000 fitImage && bootm 0x50000000" +CONFIG_BOOTCOMMAND="tftp ${loadaddr} fitImage && bootm ${loadaddr}" CONFIG_DEFAULT_FDT_FILE="r8a779g3-sparrow-hawk.dtb" CONFIG_CMD_REMOTEPROC=y CONFIG_GPIO_HOG=y diff --git a/configs/radxa-e20c-rk3528_defconfig b/configs/radxa-e20c-rk3528_defconfig index f5e097f3edf..0941d1b9be8 100644 --- a/configs/radxa-e20c-rk3528_defconfig +++ b/configs/radxa-e20c-rk3528_defconfig @@ -20,6 +20,8 @@ CONFIG_CMD_GPT=y CONFIG_CMD_MISC=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_RNG=y CONFIG_CMD_REGULATOR=y @@ -28,6 +30,7 @@ CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigne CONFIG_BUTTON=y CONFIG_BUTTON_ADC=y CONFIG_BUTTON_GPIO=y +# CONFIG_USB_FUNCTION_FASTBOOT is not set CONFIG_ROCKCHIP_GPIO=y CONFIG_LED=y CONFIG_LED_GPIO=y @@ -43,6 +46,7 @@ CONFIG_DM_MDIO=y CONFIG_DWC_ETH_QOS=y CONFIG_DWC_ETH_QOS_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y CONFIG_REGULATOR_PWM=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_PWM_ROCKCHIP=y @@ -50,6 +54,12 @@ CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y CONFIG_ERRNO_STR=y diff --git a/configs/renesas_rcar.config b/configs/renesas_rcar.config index db5846e992c..45776be62ea 100644 --- a/configs/renesas_rcar.config +++ b/configs/renesas_rcar.config @@ -18,6 +18,7 @@ CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_SPI=y CONFIG_DM_SPI_FLASH=y CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_FIT=y CONFIG_HUSH_PARSER=y CONFIG_MTD=y diff --git a/configs/ringneck-px30_defconfig b/configs/ringneck-px30_defconfig index ba15e386770..2240ba80e5e 100644 --- a/configs/ringneck-px30_defconfig +++ b/configs/ringneck-px30_defconfig @@ -40,6 +40,7 @@ CONFIG_SPL_ATF=y # CONFIG_CMD_VBE is not set # CONFIG_BOOTM_VXWORKS is not set # CONFIG_CMD_ELF is not set +CONFIG_CMD_ERASEENV=y # CONFIG_CMD_LZMADEC is not set # CONFIG_CMD_UNZIP is not set CONFIG_CMD_BIND=y diff --git a/configs/sige5-rk3576_defconfig b/configs/sige5-rk3576_defconfig new file mode 100644 index 00000000000..c515e145595 --- /dev/null +++ b/configs/sige5-rk3576_defconfig @@ -0,0 +1,66 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3576-armsom-sige5" +CONFIG_ROCKCHIP_RK3576=y +CONFIG_SYS_LOAD_ADDR=0x40c00800 +CONFIG_DEBUG_UART_BASE=0x2AD40000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3576-armsom-sige5.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0x40000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMINFO_MAP=y +CONFIG_CMD_ADC=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MISC=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +CONFIG_CMD_ROCKUSB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_RNG=y +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +# CONFIG_USB_FUNCTION_FASTBOOT is not set +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_ROCKCHIP=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_SYSRESET_PSCI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_ROCKUSB=y +CONFIG_ERRNO_STR=y diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig index 544140c03f7..bd1aacbad6a 100644 --- a/configs/starfive_visionfive2_defconfig +++ b/configs/starfive_visionfive2_defconfig @@ -85,6 +85,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_SECT_SIZE_AUTO=y CONFIG_ENV_RELOC_GD_ENV_ADDR=y CONFIG_NET_LWIP=y +CONFIG_DNS=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y CONFIG_SYSCON=y diff --git a/configs/surface-2_defconfig b/configs/surface-2_defconfig new file mode 100644 index 00000000000..6e287539f53 --- /dev/null +++ b/configs/surface-2_defconfig @@ -0,0 +1,80 @@ +CONFIG_ARM=y +CONFIG_ARCH_TEGRA=y +CONFIG_SUPPORT_PASSING_ATAGS=y +CONFIG_CMDLINE_TAG=y +CONFIG_INITRD_TAG=y +CONFIG_TEXT_BASE=0x80110000 +CONFIG_SYS_MALLOC_LEN=0x2500000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_SOURCE_FILE="surface-2" +CONFIG_ENV_SIZE=0x3000 +CONFIG_ENV_OFFSET=0xFFFFD000 +CONFIG_DEFAULT_DEVICE_TREE="tegra114-microsoft-surface-2-0b" +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SPL_TEXT_BASE=0x80108000 +CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_TEGRA114=y +CONFIG_TARGET_SURFACE_2=y +CONFIG_BUTTON_CMD=y +CONFIG_BOOTDELAY=0 +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_KEYED_CTRLC=y +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_SYS_PBSIZE=2086 +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_HAVE_INIT_STACK=y +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 +CONFIG_SYS_PROMPT="Tegra114 (Surface 2) # " +# CONFIG_CMD_BOOTEFI_BOOTMGR is not set +CONFIG_CMD_BOOTMENU=y +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_POWEROFF=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_UMS_ABORT_KEYED=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_PAUSE=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_LIST="tegra114-microsoft-surface-2-0b tegra114-microsoft-surface-2-13" +CONFIG_DTB_RESELECT=y +CONFIG_MULTI_DTB_FIT=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_BUTTON=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x91000000 +CONFIG_FASTBOOT_BUF_SIZE=0x10000000 +CONFIG_SYS_I2C_TEGRA=y +CONFIG_BUTTON_KEYBOARD=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_TPS65090=y +CONFIG_PMIC_PALMAS=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_TPS65090=y +CONFIG_DM_REGULATOR_PALMAS=y +CONFIG_PWM_TEGRA=y +CONFIG_SYS_NS16550=y +CONFIG_SYSRESET_PALMAS=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_GADGET=y +CONFIG_CI_UDC=y +CONFIG_VIDEO=y +# CONFIG_VIDEO_LOGO is not set +CONFIG_VIDEO_LCD_SAMSUNG_LTL106HL02=y +CONFIG_VIDEO_BRIDGE=y +CONFIG_VIDEO_DSI_TEGRA=y diff --git a/configs/tiger-rk3588_defconfig b/configs/tiger-rk3588_defconfig index 335ea4d8de3..8ba2a996ee2 100644 --- a/configs/tiger-rk3588_defconfig +++ b/configs/tiger-rk3588_defconfig @@ -35,6 +35,7 @@ CONFIG_SPL_ATF=y # CONFIG_BOOTM_RTEMS is not set # CONFIG_BOOTM_VXWORKS is not set # CONFIG_CMD_ELF is not set +CONFIG_CMD_ERASEENV=y CONFIG_CMD_ADC=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/doc/board/microsoft/index.rst b/doc/board/microsoft/index.rst index 107f3527852..8318449a9a2 100644 --- a/doc/board/microsoft/index.rst +++ b/doc/board/microsoft/index.rst @@ -6,4 +6,5 @@ Microsoft .. toctree:: :maxdepth: 2 + surface-2 surface-rt diff --git a/doc/board/microsoft/surface-2.rst b/doc/board/microsoft/surface-2.rst new file mode 100644 index 00000000000..8185c6f5ae4 --- /dev/null +++ b/doc/board/microsoft/surface-2.rst @@ -0,0 +1,41 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for the Microsoft Surface 2 tablet +========================================= + +Quick Start +----------- + +- Build U-Boot +- Boot + +Build U-Boot +------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=arm-none-eabi- + $ make surface-2_defconfig + $ make + +After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin`` +image, ready for loading. + +Boot +---- + +Currently, U-Boot can be preloaded into RAM via the Fusée Gelée. To enter +RCM protocol use ``power`` and ``volume up`` key combination from powered +off device. The host PC should recognize an APX device. + +Built U-Boot ``u-boot-dtb-tegra.bin`` can be loaded from fusee-tools +directory with + +.. code-block:: bash + + $ ./run_bootloader.sh -s T30 -t ./bct/surface-2.bct + +To boot Linux, U-Boot will look for an ``extlinux.conf`` on MicroSD and then on +eMMC. Additionally, if the Volume Down button is pressed while loading, the +device will enter bootmenu. Bootmenu contains entries to mount MicroSD and eMMC +as mass storage, fastboot, poweroff and enter U-Boot console. diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index b88299cbba2..de3aa79cb5c 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -134,7 +134,9 @@ List of mainline supported Rockchip boards: - Radxa ROCK 3B (rock-3b-rk3568) * rk3576 + - ArmSoM Sige5 (sige5-rk3576) - Firefly ROC-RK3576-PC (roc-pc-rk3576) + - Generic RK3576 (generic-rk3576) * rk3588 - ArmSoM Sige7 (sige7-rk3588) @@ -145,6 +147,7 @@ List of mainline supported Rockchip boards: - FriendlyElec NanoPC-T6 (nanopc-t6-rk3588) - FriendlyElec NanoPi R6C (nanopi-r6c-rk3588s) - FriendlyElec NanoPi R6S (nanopi-r6s-rk3588s) + - GameForce Ace (gameforce-ace-rk3588s) - Generic RK3588S/RK3588 (generic-rk3588) - Hardkernel ODROID-M2 (odroid-m2-rk3588s) - Indiedroid Nova (nova-rk3588s) @@ -161,6 +164,7 @@ List of mainline supported Rockchip boards: - Xunlong Orange Pi 5 (orangepi-5-rk3588s) - Xunlong Orange Pi 5 Max (orangepi-5-max-rk3588) - Xunlong Orange Pi 5 Plus (orangepi-5-plus-rk3588) + - Xunlong Orange Pi 5 Ultra (orangepi-5-ultra-rk3588) - Yanyi Tech CoolPi 4 Model B (coolpi-4b-rk3588s) - Yanyi Tech CoolPi CM5 EVB (coolpi-cm5-evb-rk3588) - Yanyi Tech CoolPi CM5 GenBook (coolpi-cm5-genbook-rk3588) diff --git a/doc/build/clang.rst b/doc/build/clang.rst index 09bb988e923..a83ecb4fdc6 100644 --- a/doc/build/clang.rst +++ b/doc/build/clang.rst @@ -46,9 +46,9 @@ It can also be used to compile sandbox: FreeBSD 11 ---------- -Since llvm 3.4 is currently in the base system, the integrated assembler as -is incapable of building U-Boot. Therefore gas from devel/arm-gnueabi-binutils -is used instead. It needs a symlink to be picked up correctly though: +Since LLVM 3.4 is currently in the base system, the integrated assembler is +incapable of building U-Boot. Therefore gas from devel/arm-gnueabi-binutils is +used instead. It needs a symbolic link to be picked up correctly though: .. code-block:: bash @@ -64,7 +64,7 @@ The following commands compile U-Boot using the Clang xdev toolchain. gmake rpi_2_defconfig gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd" -j8 -Given that U-Boot will default to gcc, above commands can be +Given that U-Boot will default to gcc, the commands above can be simplified with a simple wrapper script - saved as /usr/local/bin/arm-gnueabi-freebsd-gcc - listed below: diff --git a/doc/build/gen_compile_commands.rst b/doc/build/gen_compile_commands.rst index d503764f9e3..5eb9e4ccb0a 100644 --- a/doc/build/gen_compile_commands.rst +++ b/doc/build/gen_compile_commands.rst @@ -39,7 +39,7 @@ course) to have an up-to-date database. The database will be in the root of the repository. No further modifications are needed for it to be usable by the LSP, unless you set a name for the database -other than it's default one (compile_commands.json). +other than the default one (compile_commands.json). Compatible IDEs --------------- diff --git a/doc/build/reproducible.rst b/doc/build/reproducible.rst index 8b030f469d7..1512129e374 100644 --- a/doc/build/reproducible.rst +++ b/doc/build/reproducible.rst @@ -24,4 +24,4 @@ This date is shown when we launch U-Boot: ./u-boot -T U-Boot 2023.01 (Jan 01 2023 - 00:00:00 +0000) -The same effect can be obtained with buildman using the `-r` flag. +The same effect can be obtained with Buildman using the `-r` flag. diff --git a/doc/build/tools.rst b/doc/build/tools.rst index 5bfa05b2325..1cc8eb93230 100644 --- a/doc/build/tools.rst +++ b/doc/build/tools.rst @@ -8,7 +8,7 @@ Building tools for Linux ------------------------ To allow distributions to distribute all possible tools in a generic way, -avoiding the need of specific tools building for each machine, a tools only +avoiding the need of specific building tools for each machine, a tools-only defconfig file is provided. Using this, we can build the tools by doing:: @@ -30,9 +30,8 @@ installed all required packages below in order to build these host tools:: * diffutils (3.7) * openssl-devel (1.1.1.d) -Note the version numbers in these parentheses above are the package versions -at the time being when writing this document. The MSYS2 installer tested is -http://repo.msys2.org/distrib/x86_64/msys2-x86_64-20190524.exe. +Note that the version numbers in parentheses above are the package versions at +the time of writing this document. There are 3 MSYS subsystems installed: MSYS2, MinGW32 and MinGW64. Each subsystem provides an environment to build Windows applications. The MSYS2 @@ -50,7 +49,7 @@ Launch the MSYS2 shell of the MSYS2 environment, and do the following:: Building without Python ----------------------- -The tools-only builds bytes pylibfdt by default. To disable this, use the +The tools-only builds pylibfdt by default. To disable this, use the NO_PYTHON variable:: NO_PYTHON=1 make tools-only_defconfig tools-only diff --git a/doc/develop/release_cycle.rst b/doc/develop/release_cycle.rst index ae6200a1880..daf73e207d4 100644 --- a/doc/develop/release_cycle.rst +++ b/doc/develop/release_cycle.rst @@ -77,7 +77,7 @@ For the next scheduled release, release candidates were made on:: * U-Boot |next_ver|-rc3 was released on Mon 25 August 2025. -.. * U-Boot |next_ver|-rc4 was released on Mon 08 September 2025. +* U-Boot |next_ver|-rc4 was released on Mon 08 September 2025. .. * U-Boot |next_ver|-rc5 was released on Mon 22 September 2025. diff --git a/drivers/clk/rockchip/clk_rk3528.c b/drivers/clk/rockchip/clk_rk3528.c index 06f20895acc..d58557ff56d 100644 --- a/drivers/clk/rockchip/clk_rk3528.c +++ b/drivers/clk/rockchip/clk_rk3528.c @@ -1535,6 +1535,7 @@ static ulong rk3528_clk_set_rate(struct clk *clk, ulong rate) /* Might occur in cru assigned-clocks, can be ignored here */ case ACLK_BUS_VOPGL_ROOT: case BCLK_EMMC: + case CLK_REF_PCIE_INNER_PHY: case XIN_OSC0_DIV: ret = 0; break; diff --git a/drivers/clk/rockchip/clk_rk3576.c b/drivers/clk/rockchip/clk_rk3576.c index e84a0943a94..125b08ee832 100644 --- a/drivers/clk/rockchip/clk_rk3576.c +++ b/drivers/clk/rockchip/clk_rk3576.c @@ -2168,6 +2168,8 @@ static ulong rk3576_clk_set_rate(struct clk *clk, ulong rate) case CLK_CPLL_DIV10: case FCLK_DDR_CM0_CORE: case ACLK_PHP_ROOT: + case CLK_REF_PCIE0_PHY: + case CLK_REF_PCIE1_PHY: ret = 0; break; #ifndef CONFIG_SPL_BUILD diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c index 761e3619329..5e025d76a82 100644 --- a/drivers/mmc/rockchip_sdhci.c +++ b/drivers/mmc/rockchip_sdhci.c @@ -500,7 +500,7 @@ static int rockchip_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) { struct rockchip_sdhc *priv = dev_get_priv(mmc->dev); struct sdhci_host *host = &priv->host; - char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT; + s8 tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT; struct mmc_cmd cmd; u32 ctrl, blk_size; int ret; diff --git a/drivers/net/MAINTAINERS b/drivers/net/MAINTAINERS new file mode 100644 index 00000000000..fd002295d0c --- /dev/null +++ b/drivers/net/MAINTAINERS @@ -0,0 +1,6 @@ +NETWORK DW XGMAC +M: Boon Khai Ng <boon.khai.ng@altera.com> +S: Supported +F: drivers/net/dwc_eth_xgmac.c +F: drivers/net/dwc_eth_xgmac.h +F: drivers/net/dwc_eth_xgmac_socfpga.c diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index 88b33de1b2a..4ea6600ce7f 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -167,20 +167,27 @@ static struct phy_ops rockchip_usb2phy_ops = { .of_xlate = rockchip_usb2phy_of_xlate, }; -static void rockchip_usb2phy_clkout_ctl(struct clk *clk, struct regmap **base, - const struct usb2phy_reg **clkout_ctl) +static int rockchip_usb2phy_clkout_ctl(struct clk *clk, struct regmap **base, + const struct usb2phy_reg **clkout_ctl) { struct udevice *parent = dev_get_parent(clk->dev); struct rockchip_usb2phy *priv = dev_get_priv(parent); const struct rockchip_usb2phy_cfg *phy_cfg = priv->phy_cfg; - if (priv->phy_cfg->clkout_ctl_phy.enable) { + // phy_cfg can be NULL if this function called before probe (when parent + // clocks are enabled) + if (!phy_cfg) + return -EINVAL; + + if (phy_cfg->clkout_ctl_phy.enable) { *base = priv->phy_base; *clkout_ctl = &phy_cfg->clkout_ctl_phy; } else { *base = priv->reg_base; *clkout_ctl = &phy_cfg->clkout_ctl; } + + return 0; } /** @@ -206,7 +213,8 @@ int rockchip_usb2phy_clk_enable(struct clk *clk) const struct usb2phy_reg *clkout_ctl; struct regmap *base; - rockchip_usb2phy_clkout_ctl(clk, &base, &clkout_ctl); + if (rockchip_usb2phy_clkout_ctl(clk, &base, &clkout_ctl)) + return -ENOSYS; /* turn on 480m clk output if it is off */ if (!property_enabled(base, clkout_ctl)) { @@ -230,7 +238,8 @@ int rockchip_usb2phy_clk_disable(struct clk *clk) const struct usb2phy_reg *clkout_ctl; struct regmap *base; - rockchip_usb2phy_clkout_ctl(clk, &base, &clkout_ctl); + if (rockchip_usb2phy_clkout_ctl(clk, &base, &clkout_ctl)) + return -ENOSYS; /* turn off 480m clk output */ property_enable(base, clkout_ctl, false); @@ -456,6 +465,28 @@ static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = { { /* sentinel */ } }; +static const struct rockchip_usb2phy_cfg rk3576_phy_cfgs[] = { + { + .reg = 0x0000, + .clkout_ctl = { 0x0008, 0, 0, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x0000, 1, 0, 2, 1 }, + } + }, + }, + { + .reg = 0x2000, + .clkout_ctl = { 0x2008, 0, 0, 1, 0 }, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0x2000, 1, 0, 2, 1 }, + } + }, + }, + { /* sentinel */ } +}; + static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = { { .reg = 0x0000, @@ -518,6 +549,10 @@ static const struct udevice_id rockchip_usb2phy_ids[] = { .data = (ulong)&rk3568_phy_cfgs, }, { + .compatible = "rockchip,rk3576-usb2phy", + .data = (ulong)&rk3576_phy_cfgs, + }, + { .compatible = "rockchip,rk3588-usb2phy", .data = (ulong)&rk3588_phy_cfgs, }, @@ -538,7 +573,7 @@ U_BOOT_DRIVER(rockchip_usb2phy_clock) = { U_BOOT_DRIVER(rockchip_usb2phy) = { .name = "rockchip_usb2phy", - .id = UCLASS_PHY, + .id = UCLASS_NOP, .of_match = rockchip_usb2phy_ids, .probe = rockchip_usb2phy_probe, .bind = rockchip_usb2phy_bind, diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c index 5145b517aa4..d602f965d6a 100644 --- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c @@ -37,6 +37,7 @@ struct rockchip_combphy_grfcfg { struct combphy_reg pipe_rxterm_set; struct combphy_reg pipe_txelec_set; struct combphy_reg pipe_txcomp_set; + struct combphy_reg pipe_clk_24m; struct combphy_reg pipe_clk_25m; struct combphy_reg pipe_clk_100m; struct combphy_reg pipe_phymode_sel; @@ -98,104 +99,41 @@ static int param_write(struct regmap *base, return regmap_write(base, reg->offset, val); } -static int rockchip_combphy_pcie_init(struct rockchip_combphy_priv *priv) -{ - int ret = 0; - - if (priv->cfg->combphy_cfg) { - ret = priv->cfg->combphy_cfg(priv); - if (ret) { - dev_err(priv->dev, "failed to init phy for pcie\n"); - return ret; - } - } - - return ret; -} - -static int rockchip_combphy_usb3_init(struct rockchip_combphy_priv *priv) -{ - int ret = 0; - - if (priv->cfg->combphy_cfg) { - ret = priv->cfg->combphy_cfg(priv); - if (ret) { - dev_err(priv->dev, "failed to init phy for usb3\n"); - return ret; - } - } - - return ret; -} - -static int rockchip_combphy_sata_init(struct rockchip_combphy_priv *priv) -{ - int ret = 0; - - if (priv->cfg->combphy_cfg) { - ret = priv->cfg->combphy_cfg(priv); - if (ret) { - dev_err(priv->dev, "failed to init phy for sata\n"); - return ret; - } - } - - return ret; -} - -static int rockchip_combphy_sgmii_init(struct rockchip_combphy_priv *priv) +static int rockchip_combphy_init(struct phy *phy) { - int ret = 0; - - if (priv->cfg->combphy_cfg) { - ret = priv->cfg->combphy_cfg(priv); - if (ret) { - dev_err(priv->dev, "failed to init phy for sgmii\n"); - return ret; - } - } + struct rockchip_combphy_priv *priv = dev_get_priv(phy->dev); + int ret; - return ret; -} + ret = clk_enable(&priv->ref_clk); + if (ret < 0 && ret != -ENOSYS) + return ret; -static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv) -{ switch (priv->mode) { case PHY_TYPE_PCIE: - rockchip_combphy_pcie_init(priv); - break; case PHY_TYPE_USB3: - rockchip_combphy_usb3_init(priv); - break; case PHY_TYPE_SATA: - rockchip_combphy_sata_init(priv); - break; case PHY_TYPE_SGMII: case PHY_TYPE_QSGMII: - return rockchip_combphy_sgmii_init(priv); + if (priv->cfg->combphy_cfg) + ret = priv->cfg->combphy_cfg(priv); + else + ret = 0; + break; default: dev_err(priv->dev, "incompatible PHY type\n"); - return -EINVAL; + ret = -EINVAL; + break; } - return 0; -} - -static int rockchip_combphy_init(struct phy *phy) -{ - struct rockchip_combphy_priv *priv = dev_get_priv(phy->dev); - int ret; - - ret = clk_enable(&priv->ref_clk); - if (ret < 0 && ret != -ENOSYS) - return ret; + if (ret) { + dev_err(priv->dev, "failed to init phy for phy type %x\n", priv->mode); + goto err_clk; + } - ret = rockchip_combphy_set_mode(priv); + ret = reset_deassert_bulk(&priv->phy_rsts); if (ret) goto err_clk; - reset_deassert_bulk(&priv->phy_rsts); - return 0; err_clk: @@ -223,6 +161,7 @@ static int rockchip_combphy_xlate(struct phy *phy, struct ofnode_phandle_args *a return -EINVAL; } + phy->id = priv->id; priv->mode = args->args[0]; return 0; @@ -237,22 +176,19 @@ static const struct phy_ops rockchip_combphy_ops = { static int rockchip_combphy_parse_dt(struct udevice *dev, struct rockchip_combphy_priv *priv) { - struct udevice *syscon; int ret; - ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,pipe-grf", &syscon); - if (ret) { - dev_err(dev, "failed to find peri_ctrl pipe-grf regmap"); - return ret; + priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev, "rockchip,pipe-grf"); + if (IS_ERR(priv->pipe_grf)) { + dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n"); + return PTR_ERR(priv->pipe_grf); } - priv->pipe_grf = syscon_get_regmap(syscon); - ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,pipe-phy-grf", &syscon); - if (ret) { + priv->phy_grf = syscon_regmap_lookup_by_phandle(dev, "rockchip,pipe-phy-grf"); + if (IS_ERR(priv->phy_grf)) { dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n"); - return ret; + return PTR_ERR(priv->phy_grf); } - priv->phy_grf = syscon_get_regmap(syscon); ret = clk_get_by_index(dev, 0, &priv->ref_clk); if (ret) { @@ -304,12 +240,109 @@ static int rockchip_combphy_probe(struct udevice *udev) } priv->dev = udev; - priv->mode = PHY_TYPE_SATA; + priv->mode = PHY_NONE; priv->cfg = phy_cfg; return rockchip_combphy_parse_dt(udev, priv); } +static int rk3528_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + u32 val; + + switch (priv->mode) { + case PHY_TYPE_PCIE: + /* Set SSC downward spread spectrum */ + val = readl(priv->mmio + 0x18); + val &= ~GENMASK(5, 4); + val |= 0x01 << 4; + writel(val, priv->mmio + 0x18); + + param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + break; + case PHY_TYPE_USB3: + /* Set SSC downward spread spectrum */ + val = readl(priv->mmio + 0x18); + val &= ~GENMASK(5, 4); + val |= 0x01 << 4; + writel(val, priv->mmio + 0x18); + + /* Enable adaptive CTLE for USB3.0 Rx */ + val = readl(priv->mmio + 0x200); + val &= ~GENMASK(17, 17); + val |= 0x01 << 17; + writel(val, priv->mmio + 0x200); + + /* Set Rx squelch input filler bandwidth */ + val = readl(priv->mmio + 0x20c); + val &= ~GENMASK(2, 0); + val |= 0x06; + writel(val, priv->mmio + 0x20c); + + param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + param_write(priv->phy_grf, &cfg->usb_mode_set, true); + param_write(priv->pipe_grf, &cfg->u3otg0_port_en, true); + break; + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + + if (priv->mode == PHY_TYPE_PCIE) { + /* PLL KVCO tuning fine */ + val = readl(priv->mmio + 0x18); + val &= ~(0x7 << 10); + val |= 0x2 << 10; + writel(val, priv->mmio + 0x18); + + /* su_trim[6:4]=111, [10:7]=1001, [2:0]=000 */ + val = readl(priv->mmio + 0x108); + val &= ~(0x7f7); + val |= 0x4f0; + writel(val, priv->mmio + 0x108); + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3528_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_24m = { 0x0004, 14, 13, 0x00, 0x00 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x110 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x00 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, + /* pipe-grf */ + .u3otg0_port_en = { 0x0044, 15, 0, 0x0181, 0x1100 }, +}; + +static const struct rockchip_combphy_cfg rk3528_combphy_cfgs = { + .num_phys = 1, + .phy_ids = { + 0xffdc0000, + }, + .grfcfg = &rk3528_combphy_grfcfgs, + .combphy_cfg = rk3528_combphy_cfg, +}; + static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv) { const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; @@ -453,6 +486,149 @@ static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { .combphy_cfg = rk3568_combphy_cfg, }; +static int rk3576_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + u32 val; + + switch (priv->mode) { + case PHY_TYPE_PCIE: + param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + break; + case PHY_TYPE_USB3: + /* Set SSC downward spread spectrum */ + val = readl(priv->mmio + (0x1f << 2)); + val &= ~GENMASK(5, 4); + val |= 0x01 << 4; + writel(val, priv->mmio + 0x7c); + + /* Enable adaptive CTLE for USB3.0 Rx */ + val = readl(priv->mmio + (0x0e << 2)); + val &= ~GENMASK(0, 0); + val |= 0x01; + writel(val, priv->mmio + (0x0e << 2)); + + /* Set PLL KVCO fine tuning signals */ + val = readl(priv->mmio + (0x20 << 2)); + val &= ~(0x7 << 2); + val |= 0x2 << 2; + writel(val, priv->mmio + (0x20 << 2)); + + /* Set PLL LPF R1 to su_trim[10:7]=1001 */ + writel(0x4, priv->mmio + (0xb << 2)); + + /* Set PLL input clock divider 1/2 */ + val = readl(priv->mmio + (0x5 << 2)); + val &= ~(0x3 << 6); + val |= 0x1 << 6; + writel(val, priv->mmio + (0x5 << 2)); + + /* Set PLL loop divider */ + writel(0x32, priv->mmio + (0x11 << 2)); + + /* Set PLL KVCO to min and set PLL charge pump current to max */ + writel(0xf0, priv->mmio + (0xa << 2)); + + /* Set Rx squelch input filler bandwidth */ + writel(0x0d, priv->mmio + (0x14 << 2)); + + param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + param_write(priv->phy_grf, &cfg->usb_mode_set, true); + param_write(priv->pipe_grf, &cfg->u3otg1_port_en, true); + break; + case PHY_TYPE_SATA: + /* Enable adaptive CTLE for SATA Rx */ + val = readl(priv->mmio + (0x0e << 2)); + val &= ~GENMASK(0, 0); + val |= 0x01; + writel(val, priv->mmio + (0x0e << 2)); + /* Set tx_rterm = 50 ohm and rx_rterm = 43.5 ohm */ + writel(0x8F, priv->mmio + (0x06 << 2)); + + param_write(priv->phy_grf, &cfg->con0_for_sata, true); + param_write(priv->phy_grf, &cfg->con1_for_sata, true); + param_write(priv->phy_grf, &cfg->con2_for_sata, true); + param_write(priv->phy_grf, &cfg->con3_for_sata, true); + param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); + param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true); + break; + case PHY_TYPE_SGMII: + case PHY_TYPE_QSGMII: + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + /* 100MHz refclock signal is good */ + clk_set_rate(&priv->ref_clk, 100000000); + param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + if (priv->mode == PHY_TYPE_PCIE) { + /* gate_tx_pck_sel length select work for L1SS */ + writel(0xc0, priv->mmio + 0x74); + + /* PLL KVCO tuning fine */ + val = readl(priv->mmio + (0x20 << 2)); + val &= ~(0x7 << 2); + val |= 0x2 << 2; + writel(val, priv->mmio + (0x20 << 2)); + + /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ + writel(0x4c, priv->mmio + (0x1b << 2)); + + /* Set up su_trim: T3_P1 650mv */ + writel(0x90, priv->mmio + (0xa << 2)); + writel(0x43, priv->mmio + (0xb << 2)); + writel(0x88, priv->mmio + (0xc << 2)); + writel(0x56, priv->mmio + (0xd << 2)); + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3576_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, + .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, + .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0129 }, + .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c1 }, + .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x0407 }, + /* php-grf */ + .pipe_con0_for_sata = { 0x001C, 2, 0, 0x00, 0x2 }, + .pipe_con1_for_sata = { 0x0020, 2, 0, 0x00, 0x2 }, + .u3otg1_port_en = { 0x0038, 15, 0, 0x0181, 0x1100 }, +}; + +static const struct rockchip_combphy_cfg rk3576_combphy_cfgs = { + .num_phys = 2, + .phy_ids = { + 0x2b050000, + 0x2b060000, + }, + .grfcfg = &rk3576_combphy_grfcfgs, + .combphy_cfg = rk3576_combphy_cfg, +}; + static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv) { const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; @@ -561,10 +737,18 @@ static const struct rockchip_combphy_cfg rk3588_combphy_cfgs = { static const struct udevice_id rockchip_combphy_ids[] = { { + .compatible = "rockchip,rk3528-naneng-combphy", + .data = (ulong)&rk3528_combphy_cfgs + }, + { .compatible = "rockchip,rk3568-naneng-combphy", .data = (ulong)&rk3568_combphy_cfgs }, { + .compatible = "rockchip,rk3576-naneng-combphy", + .data = (ulong)&rk3576_combphy_cfgs + }, + { .compatible = "rockchip,rk3588-naneng-combphy", .data = (ulong)&rk3588_combphy_cfgs }, diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index c48a5cd5267..66d1d32d25c 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -788,7 +788,7 @@ U_BOOT_DRIVER(rockchip_tcphy_usb3_port) = { U_BOOT_DRIVER(rockchip_typec_phy) = { .name = "rockchip_typec_phy", - .id = UCLASS_PHY, + .id = UCLASS_NOP, .of_match = rockchip_typec_phy_ids, .probe = rockchip_tcphy_probe, .bind = rockchip_tcphy_bind, diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c index 9deec47ae46..cca67dd3611 100644 --- a/drivers/phy/rockchip/phy-rockchip-usbdp.c +++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c @@ -96,9 +96,7 @@ struct rockchip_udphy { /* PHY status management */ bool flip; - bool mode_change; u8 mode; - u8 status; /* utilized for USB */ bool hs; /* flag for high-speed */ @@ -525,80 +523,26 @@ static int udphy_parse_dt(struct rockchip_udphy *udphy, struct udevice *dev) return 0; } -static int udphy_power_on(struct rockchip_udphy *udphy, u8 mode) -{ - int ret; - - if (!(udphy->mode & mode)) { - dev_info(udphy->dev, "mode 0x%02x is not support\n", mode); - return 0; - } - - if (udphy->status == UDPHY_MODE_NONE) { - udphy->mode_change = false; - ret = udphy_setup(udphy); - if (ret) - return ret; - - if (udphy->mode & UDPHY_MODE_USB) - udphy_u3_port_disable(udphy, false); - } else if (udphy->mode_change) { - udphy->mode_change = false; - udphy->status = UDPHY_MODE_NONE; - if (udphy->mode == UDPHY_MODE_DP) - udphy_u3_port_disable(udphy, true); - - ret = udphy_disable(udphy); - if (ret) - return ret; - ret = udphy_setup(udphy); - if (ret) - return ret; - } - - udphy->status |= mode; - - return 0; -} - -static int udphy_power_off(struct rockchip_udphy *udphy, u8 mode) -{ - int ret; - - if (!(udphy->mode & mode)) { - dev_info(udphy->dev, "mode 0x%02x is not supported\n", mode); - return 0; - } - - if (!udphy->status) - return 0; - - udphy->status &= ~mode; - - if (udphy->status == UDPHY_MODE_NONE) { - ret = udphy_disable(udphy); - if (ret) - return ret; - } - - return 0; -} - static int rockchip_u3phy_of_xlate(struct phy *phy, struct ofnode_phandle_args *args) { + struct rockchip_udphy *udphy = dev_get_priv(phy->dev); + if (args->args_count == 0) return -EINVAL; if (args->args[0] != PHY_TYPE_USB3) return -EINVAL; + phy->id = udphy->id; + return 0; } static int rockchip_u3phy_init(struct phy *phy) { struct rockchip_udphy *udphy = dev_get_priv(phy->dev); + int ret; /* DP only or high-speed, disable U3 port */ if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs) { @@ -606,7 +550,12 @@ static int rockchip_u3phy_init(struct phy *phy) return 0; } - return udphy_power_on(udphy, UDPHY_MODE_USB); + ret = udphy_setup(udphy); + if (ret) + return ret; + + udphy_u3_port_disable(udphy, false); + return 0; } static int rockchip_u3phy_exit(struct phy *phy) @@ -617,7 +566,7 @@ static int rockchip_u3phy_exit(struct phy *phy) if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs) return 0; - return udphy_power_off(udphy, UDPHY_MODE_USB); + return udphy_disable(udphy); } static const struct phy_ops rockchip_u3phy_ops = { @@ -813,6 +762,28 @@ static const char * const rk3588_udphy_rst_l[] = { "init", "cmn", "lane", "pcs_apb", "pma_apb" }; +static const struct rockchip_udphy_cfg rk3576_udphy_cfgs = { + .num_phys = 1, + .phy_ids = { + 0x2b010000, + }, + .num_rsts = ARRAY_SIZE(rk3588_udphy_rst_l), + .rst_list = rk3588_udphy_rst_l, + .grfcfg = { + /* u2phy-grf */ + .bvalid_phy_con = { 0x0010, 1, 0, 0x2, 0x3 }, + .bvalid_grf_con = { 0x0000, 15, 14, 0x1, 0x3 }, + + /* usb-grf */ + .usb3otg0_cfg = { 0x0030, 15, 0, 0x1100, 0x0188 }, + + /* usbdpphy-grf */ + .low_pwrn = { 0x0004, 13, 13, 0, 1 }, + .rx_lfps = { 0x0004, 14, 14, 0, 1 }, + }, + .combophy_init = rk3588_udphy_init, +}; + static const struct rockchip_udphy_cfg rk3588_udphy_cfgs = { .num_phys = 2, .phy_ids = { @@ -839,6 +810,10 @@ static const struct rockchip_udphy_cfg rk3588_udphy_cfgs = { static const struct udevice_id rockchip_udphy_dt_match[] = { { + .compatible = "rockchip,rk3576-usbdp-phy", + .data = (ulong)&rk3576_udphy_cfgs + }, + { .compatible = "rockchip,rk3588-usbdp-phy", .data = (ulong)&rk3588_udphy_cfgs }, diff --git a/drivers/pinctrl/renesas/rzg2l-pfc.c b/drivers/pinctrl/renesas/rzg2l-pfc.c index 3c751e9473a..4a75e0b2372 100644 --- a/drivers/pinctrl/renesas/rzg2l-pfc.c +++ b/drivers/pinctrl/renesas/rzg2l-pfc.c @@ -353,7 +353,7 @@ static int rzg2l_pinconf_set(struct udevice *dev, unsigned int pin_selector, /* The pin selector refers to a multiplexed pin */ int port = rzg2l_selector_decode(data, pin_selector, &pin); if (port < 0) { - dev_err(dev, "Invalid pin selector %u:%u\n", port, pin); + dev_err(dev, "Invalid pin selector %u\n", pin_selector); return port; } @@ -550,7 +550,7 @@ static int rzg2l_get_pin_muxing(struct udevice *dev, unsigned int selector, port = rzg2l_selector_decode(data, selector, &pin); if (port < 0) { - dev_err(dev, "Invalid pin selector %u:%u\n", port, pin); + dev_err(dev, "Invalid pin selector %u\n", selector); return port; } diff --git a/drivers/power/pmic/rk8xx.c b/drivers/power/pmic/rk8xx.c index 3bc696d4caa..d11f7a7886e 100644 --- a/drivers/power/pmic/rk8xx.c +++ b/drivers/power/pmic/rk8xx.c @@ -89,11 +89,6 @@ void rk8xx_off_for_plugin(struct udevice *dev) } } -static struct reg_data rk806_init_reg[] = { - /* RST_FUN */ - { RK806_REG_SYS_CFG3, BIT(7), GENMASK(7, 6)}, -}; - static struct reg_data rk817_init_reg[] = { /* enable the under-voltage protection, * the under-voltage protection will shutdown the LDO3 and reset the PMIC @@ -306,12 +301,20 @@ static int rk8xx_probe(struct udevice *dev) value = (power_en2 & 0x0f) | ((power_en3 & 0x0f) << 4); pmic_reg_write(dev, RK817_POWER_EN_SAVE1, value); break; - case RK806_ID: + case RK806_ID: { + u32 rst_fun = 2; + on_source = RK806_ON_SOURCE; off_source = RK806_OFF_SOURCE; - init_data = rk806_init_reg; - init_data_num = ARRAY_SIZE(rk806_init_reg); - break; + + ret = dev_read_u32(dev, "rockchip,reset-mode", &rst_fun); + if (ret) + debug("rockchip,reset-mode property missing, defaulting to %d\n", + rst_fun); + + pmic_clrsetbits(dev, RK806_REG_SYS_CFG3, RK806_RST_FUN_MSK, + FIELD_PREP(RK806_RST_FUN_MSK, rst_fun)); + break; } default: printf("Unknown PMIC: RK%x!!\n", show_variant); return -EINVAL; diff --git a/drivers/rng/rockchip_rng.c b/drivers/rng/rockchip_rng.c index d854ea90044..8cf750e043c 100644 --- a/drivers/rng/rockchip_rng.c +++ b/drivers/rng/rockchip_rng.c @@ -394,6 +394,10 @@ static const struct udevice_id rockchip_rng_match[] = { .data = (ulong)&rk_trngv1_soc_data, }, { + .compatible = "rockchip,rk3576-rng", + .data = (ulong)&rkrng_soc_data, + }, + { .compatible = "rockchip,rkrng", .data = (ulong)&rkrng_soc_data, }, diff --git a/drivers/serial/serial_efi.c b/drivers/serial/serial_efi.c index 5733eaaf9d4..d3cd4de34a2 100644 --- a/drivers/serial/serial_efi.c +++ b/drivers/serial/serial_efi.c @@ -33,7 +33,7 @@ int serial_efi_setbrg(struct udevice *dev, int baudrate) static int serial_efi_get_key(struct serial_efi_priv *priv) { - int ret; + efi_status_t ret; if (priv->have_key) return 0; diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index a30c40ef80e..9eaf7e40ab6 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -557,10 +557,10 @@ static void cdns3_wa2_remove_old_request(struct cdns3_endpoint *priv_ep) trace_cdns3_wa2(priv_ep, "removes eldest request"); + list_del_init(&priv_req->list); kfree(priv_req->request.buf); cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); - list_del_init(&priv_req->list); --priv_ep->wa2_counter; if (!chain) @@ -1959,10 +1959,10 @@ static int cdns3_gadget_ep_disable(struct usb_ep *ep) while (!list_empty(&priv_ep->wa2_descmiss_req_list)) { priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list); + list_del_init(&priv_req->list); kfree(priv_req->request.buf); cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); - list_del_init(&priv_req->list); --priv_ep->wa2_counter; } diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c index 3cda2b74b7e..c09014aec60 100644 --- a/drivers/usb/dwc3/dwc3-generic.c +++ b/drivers/usb/dwc3/dwc3-generic.c @@ -698,7 +698,9 @@ static const struct udevice_id dwc3_glue_ids[] = { { .compatible = "ti,am654-dwc3" }, { .compatible = "rockchip,rk3328-dwc3", .data = (ulong)&rk_ops }, { .compatible = "rockchip,rk3399-dwc3" }, + { .compatible = "rockchip,rk3528-dwc3", .data = (ulong)&rk_ops }, { .compatible = "rockchip,rk3568-dwc3", .data = (ulong)&rk_ops }, + { .compatible = "rockchip,rk3576-dwc3", .data = (ulong)&rk_ops }, { .compatible = "rockchip,rk3588-dwc3", .data = (ulong)&rk_ops }, { .compatible = "qcom,dwc3", .data = (ulong)&qcom_ops }, { .compatible = "fsl,imx8mp-dwc3", .data = (ulong)&imx8mp_ops }, diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 46a83141481..0121f9872ae 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -86,6 +86,7 @@ config USB_GADGET_PRODUCT_NUM default 0x350a if ROCKCHIP_RK3568 default 0x350b if ROCKCHIP_RK3588 default 0x350c if ROCKCHIP_RK3528 + default 0x350e if ROCKCHIP_RK3576 default 0x0 help Product ID of the USB device emulated, reported to the host device. @@ -201,12 +202,13 @@ config USB_FUNCTION_MASS_STORAGE the eMMC/SD card content to HOST PC so it can be mounted. config USB_FUNCTION_ROCKUSB - bool "Enable USB rockusb gadget" - help - Rockusb protocol is widely used by Rockchip SoC based devices. It can - read/write info, image to/from devices. This enables the USB part of - the rockusb gadget.for more detail about Rockusb protocol, please see - doc/README.rockusb + bool "Enable USB rockusb gadget" + depends on ARCH_ROCKCHIP + help + Rockusb protocol is widely used by Rockchip SoC based devices. It can + read/write info, image to/from devices. This enables the USB part of + the rockusb gadget.for more detail about Rockusb protocol, please see + doc/README.rockusb config USB_FUNCTION_SDP bool "Enable USB SDP (Serial Download Protocol)" diff --git a/dts/upstream/Bindings/mfd/rockchip,rk806.yaml b/dts/upstream/Bindings/mfd/rockchip,rk806.yaml index 3c2b06629b7..eb5bca31948 100644 --- a/dts/upstream/Bindings/mfd/rockchip,rk806.yaml +++ b/dts/upstream/Bindings/mfd/rockchip,rk806.yaml @@ -31,6 +31,27 @@ properties: system-power-controller: true + rockchip,reset-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + Mode to use when a reset of the PMIC is triggered. + + The reset can be triggered either programmatically, via one of + the PWRCTRL pins (provided additional configuration) or + asserting RESETB pin low. + + The following modes are supported + + - 0; restart PMU, + - 1; reset all power off reset registers and force state to + switch to ACTIVE mode, + - 2; same as mode 1 and also pull RESETB pin down for 5ms, + + For example, some hardware may require a full restart (mode 0) + in order to function properly as regulators are shortly + interrupted in this mode. + vcc1-supply: description: The input supply for dcdc-reg1. diff --git a/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts b/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts index ebe77cdd24e..176925d0a1a 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts +++ b/dts/upstream/src/arm64/rockchip/rk3588-jaguar.dts @@ -10,6 +10,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/soc/rockchip,vop2.h> #include <dt-bindings/usb/pd.h> +#include "rk8xx.h" #include "rk3588.dtsi" / { @@ -693,6 +694,7 @@ vcc13-supply = <&vcc_1v1_nldo_s3>; vcc14-supply = <&vcc_1v1_nldo_s3>; vcca-supply = <&vcc5v0_sys>; + rockchip,reset-mode = <RK806_RESTART>; rk806_dvs1_null: dvs1-null-pins { pins = "gpio_pwrctrl1"; diff --git a/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi index c4933a08dd1..b44e89e1bb1 100644 --- a/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi +++ b/dts/upstream/src/arm64/rockchip/rk3588-tiger.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include "rk8xx.h" #include "rk3588.dtsi" / { @@ -440,6 +441,7 @@ vcc13-supply = <&vcc_1v1_nldo_s3>; vcc14-supply = <&vcc_1v1_nldo_s3>; vcca-supply = <&vcc5v0_sys>; + rockchip,reset-mode = <RK806_RESTART>; rk806_dvs1_null: dvs1-null-pins { pins = "gpio_pwrctrl1"; diff --git a/dts/upstream/src/arm64/rockchip/rk8xx.h b/dts/upstream/src/arm64/rockchip/rk8xx.h new file mode 100644 index 00000000000..a6fbef71c06 --- /dev/null +++ b/dts/upstream/src/arm64/rockchip/rk8xx.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) */ +/* + * Device Tree defines for Rockchip RK8xx PMICs + * + * Copyright 2025 Cherry Embedded Solutions GmbH + * + * Author: Quentin Schulz <quentin.schulz@cherry.de> + */ + +#ifndef _DT_MFD_ROCKCHIP_RK8XX_H +#define _DT_MFD_ROCKCHIP_RK8XX_H + +/* For use with rockchip,reset-mode property */ +#define RK806_RESTART 0 +#define RK806_RESET 1 +#define RK806_RESET_NOTIFY 2 + +#endif diff --git a/env/Kconfig b/env/Kconfig index 03c189b7266..adea277470f 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -635,7 +635,7 @@ config ENV_OFFSET_REDUND config ENV_OFFSET_REDUND_RELATIVE_END bool "Offset is relative to the end of the partition" - depends on SYS_REDUNDAND_ENVIRONMENT + depends on ENV_REDUNDANT depends on ENV_IS_IN_MMC help Treat the redundant environment offset as relative to the end of the diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 266b77fbf68..8c29c940478 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -11,30 +11,13 @@ #ifndef __CONFIG_AM57XX_EVM_H #define __CONFIG_AM57XX_EVM_H -#include <env/ti/dfu.h> #include <linux/sizes.h> #define CFG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ #define CFG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CFG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ -#ifndef CONFIG_XPL_BUILD -#define DFUARGS \ - "dfu_bufsiz=0x10000\0" \ - DFU_ALT_INFO_MMC \ - DFU_ALT_INFO_EMMC \ - DFU_ALT_INFO_RAM \ - DFU_ALT_INFO_QSPI -#else -#ifdef CONFIG_SPL_DFU -#define DFUARGS \ - "dfu_bufsiz=0x10000\0" \ - DFU_ALT_INFO_RAM -#endif -#endif - -#include <configs/ti_omap5_common.h> - /* CPSW Ethernet */ +#include <configs/ti_omap5_common.h> #endif /* __CONFIG_AM57XX_EVM_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 3c960ca2ce2..9df7ef055bf 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -11,40 +11,16 @@ #ifndef __CONFIG_DRA7XX_EVM_H #define __CONFIG_DRA7XX_EVM_H -#include <env/ti/dfu.h> - #define CFG_MAX_MEM_MAPPED 0x80000000 #ifndef CONFIG_QSPI_BOOT /* MMC ENV related defines */ #endif -#if (CONFIG_CONS_INDEX == 1) -#define CONSOLEDEV "ttyS0" -#elif (CONFIG_CONS_INDEX == 3) -#define CONSOLEDEV "ttyS2" -#endif #define CFG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ #define CFG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ #define CFG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ -#ifndef CONFIG_XPL_BUILD -#define DFUARGS \ - "dfu_bufsiz=0x10000\0" \ - DFU_ALT_INFO_MMC \ - DFU_ALT_INFO_EMMC \ - DFU_ALT_INFO_RAM \ - DFU_ALT_INFO_QSPI -#endif - -#ifdef CONFIG_XPL_BUILD -#ifdef CONFIG_SPL_DFU -#define DFUARGS \ - "dfu_bufsiz=0x10000\0" \ - DFU_ALT_INFO_RAM -#endif -#endif - #include <configs/ti_omap5_common.h> /* NAND support */ diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 0c449e31099..52c3695ff8e 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -18,7 +18,8 @@ #define ENV_MEM_LAYOUT_SETTINGS \ "scriptaddr=0x00000000\0" \ "pxefile_addr_r=0x00100000\0" \ - "fdt_addr_r=0x01f00000\0" \ + "fdt_addr_r=0x01e00000\0" \ + "fdtoverlay_addr_r=0x01f00000\0" \ "kernel_addr_r=0x02000000\0" \ "ramdisk_addr_r=0x04000000\0" diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 39102f15eb9..9e02b0d0040 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -39,216 +39,6 @@ #define DFUARGS #endif -#include <env/ti/mmc.h> -#include <env/ti/nand.h> - -#ifndef CONSOLEDEV -#define CONSOLEDEV "ttyS2" -#endif - -#ifndef PARTS_DEFAULT -/* - * Default GPT tables for eMMC (Linux and Android). Notes: - * 1. Keep partitions aligned to erase group size (512 KiB) when possible - * 2. Keep partitions in sync with DFU_ALT_INFO_EMMC (see dfu.h) - * 3. Keep 'bootloader' partition (U-Boot proper) start address in sync with - * CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (see common/spl/Kconfig) - */ -#define PARTS_DEFAULT \ - /* Linux partitions */ \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \ - "name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \ - /* Android partitions */ \ - "partitions_android=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \ - "name=bootloader,size=2048K,uuid=${uuid_gpt_bootloader};" \ - "name=uboot-env,start=2432K,size=256K,uuid=${uuid_gpt_reserved};" \ - "name=misc,size=128K,uuid=${uuid_gpt_misc};" \ - "name=boot_a,size=20M,uuid=${uuid_gpt_boot_a};" \ - "name=boot_b,size=20M,uuid=${uuid_gpt_boot_b};" \ - "name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a};" \ - "name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b};" \ - "name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a};" \ - "name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b};" \ - "name=recovery,size=64M,uuid=${uuid_gpt_recovery};" \ - "name=super,size=2560M,uuid=${uuid_gpt_super};" \ - "name=metadata,size=16M,uuid=${uuid_gpt_metadata};" \ - "name=userdata,size=-,uuid=${uuid_gpt_userdata}" -#endif /* PARTS_DEFAULT */ - -#if defined(CONFIG_CMD_AVB) -#define AVB_VERIFY_CHECK "if run avb_verify; then " \ - "echo AVB verification OK.;" \ - "set bootargs $bootargs $avb_bootargs;" \ - "else " \ - "echo AVB verification failed.;" \ - "exit; fi;" -#define AVB_VERIFY_CMD "avb_verify=avb init 1; avb verify $slot_suffix;\0" -#else -#define AVB_VERIFY_CHECK "" -#define AVB_VERIFY_CMD "" -#endif - -#define CONTROL_PARTITION "misc" - -#if defined(CONFIG_CMD_BCB) && defined(CONFIG_ANDROID_AB) -#define AB_SELECT_SLOT \ - "if part number mmc 1 " CONTROL_PARTITION " control_part_number; " \ - "then " \ - "echo " CONTROL_PARTITION \ - " partition number:${control_part_number};" \ - "bcb ab_select slot_name mmc ${mmcdev}:${control_part_number};" \ - "else " \ - "echo " CONTROL_PARTITION " partition not found;" \ - "exit;" \ - "fi;" \ - "setenv slot_suffix _${slot_name};" -#define AB_SELECT_ARGS \ - "setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; " \ - "echo A/B cmdline addition: ${bootargs_ab};" \ - "setenv bootargs ${bootargs} ${bootargs_ab};" -#else -#define AB_SELECT_SLOT "" -#define AB_SELECT_ARGS "" -#endif - -/* - * Prepares complete device tree blob for current board (for Android boot). - * - * Boot image or recovery image should be loaded into $loadaddr prior to running - * these commands. The logic of these commnads is next: - * - * 1. Read correct DTB for current SoC/board from boot image in $loadaddr - * to $fdtaddr - * 2. Merge all needed DTBO for current board from 'dtbo' partition into read - * DTB - * 3. User should provide $fdtaddr as 3rd argument to 'bootm' - */ -#define PREPARE_FDT \ - "echo Preparing FDT...; " \ - "if test $board_name = am57xx_evm_reva3; then " \ - "echo \" Reading DTBO partition...\"; " \ - "part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \ - "part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \ - "mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \ - "echo \" Reading DTB for AM57x EVM RevA3...\"; " \ - "abootimg get dtb --index=0 dtb_start dtb_size; " \ - "cp.b $dtb_start $fdtaddr $dtb_size; " \ - "fdt addr $fdtaddr 0x80000; " \ - "echo \" Applying DTBOs for AM57x EVM RevA3...\"; " \ - "adtimg addr $dtboaddr; " \ - "adtimg get dt --index=0 dtbo0_addr dtbo0_size; " \ - "fdt apply $dtbo0_addr; " \ - "adtimg get dt --index=1 dtbo1_addr dtbo1_size; " \ - "fdt apply $dtbo1_addr; " \ - "elif test $board_name = beagle_x15_revc; then " \ - "echo \" Reading DTB for Beagle X15 RevC...\"; " \ - "abootimg get dtb --index=0 dtb_start dtb_size; " \ - "cp.b $dtb_start $fdtaddr $dtb_size; " \ - "fdt addr $fdtaddr 0x80000; " \ - "else " \ - "echo Error: Android boot is not supported for $board_name; " \ - "exit; " \ - "fi; " \ - -#define DEFAULT_COMMON_BOOT_TI_ARGS \ - "console=" CONSOLEDEV ",115200n8\0" \ - "fdtfile=undefined\0" \ - "finduuid=part uuid mmc 0:2 uuid\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - AVB_VERIFY_CMD \ - "partitions=" PARTS_DEFAULT "\0" \ - "optargs=\0" \ - "dofastboot=0\0" \ - "emmc_android_boot=" \ - "setenv mmcdev 1; " \ - "mmc dev $mmcdev; " \ - "mmc rescan; " \ - AB_SELECT_SLOT \ - "if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \ - CONTROL_PARTITION "; then " \ - "setenv ardaddr -; " \ - "if bcb test command = bootonce-bootloader; then " \ - "echo Android: Bootloader boot...; " \ - "bcb clear command; bcb store; " \ - "fastboot 1; " \ - "exit; " \ - "elif bcb test command = boot-recovery; then " \ - "echo Android: Recovery boot...; " \ - "setenv ardaddr $loadaddr;" \ - "setenv apart recovery; " \ - "else " \ - "echo Android: Normal boot...; " \ - "setenv ardaddr $loadaddr; " \ - "setenv apart boot${slot_suffix}; " \ - "fi; " \ - "else " \ - "echo Warning: BCB is corrupted or does not exist; " \ - "echo Android: Normal boot...; " \ - "fi; " \ - "setenv eval_bootargs setenv bootargs $bootargs; " \ - "run eval_bootargs; " \ - "setenv machid fe6; " \ - AVB_VERIFY_CHECK \ - AB_SELECT_ARGS \ - "if part start mmc $mmcdev $apart boot_start; then " \ - "part size mmc $mmcdev $apart boot_size; " \ - "mmc read $loadaddr $boot_start $boot_size; " \ - PREPARE_FDT \ - "bootm $loadaddr $ardaddr $fdtaddr; " \ - "else " \ - "echo $apart partition not found; " \ - "exit; " \ - "fi;\0" - -#define DEFAULT_FDT_TI_ARGS \ - "findfdt="\ - "if test $board_name = omap5_uevm; then " \ - "setenv fdtfile omap5-uevm.dtb; fi; " \ - "if test $board_name = dra7xx; then " \ - "setenv fdtfile dra7-evm.dtb; fi;" \ - "if test $board_name = dra72x-revc; then " \ - "setenv fdtfile dra72-evm-revc.dtb; fi;" \ - "if test $board_name = dra72x; then " \ - "setenv fdtfile dra72-evm.dtb; fi;" \ - "if test $board_name = dra71x; then " \ - "setenv fdtfile dra71-evm.dtb; fi;" \ - "if test $board_name = dra76x_acd; then " \ - "setenv fdtfile dra76-evm.dtb; fi;" \ - "if test $board_name = beagle_x15; then " \ - "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ - "if test $board_name = beagle_x15_revb1; then " \ - "setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \ - "if test $board_name = beagle_x15_revc; then " \ - "setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;" \ - "if test $board_name = am5729_beagleboneai; then " \ - "setenv fdtfile am5729-beagleboneai.dtb; fi;" \ - "if test $board_name = am572x_idk; then " \ - "setenv fdtfile am572x-idk.dtb; fi;" \ - "if test $board_name = am574x_idk; then " \ - "setenv fdtfile am574x-idk.dtb; fi;" \ - "if test $board_name = am57xx_evm; then " \ - "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ - "if test $board_name = am57xx_evm_reva3; then " \ - "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ - "if test $board_name = am571x_idk; then " \ - "setenv fdtfile am571x-idk.dtb; fi;" \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi; \0" - -#define GET_OVERLAY_MMC_TI_ARGS \ - "get_overlay_mmc=" \ - "fdt address ${fdtaddr};" \ - "fdt resize 0x100000;" \ - "for overlay in $name_overlays;" \ - "do;" \ - "load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/${overlay} &&" \ - "fdt apply ${dtboaddr};" \ - "done;\0" \ - #define BOOT_TARGET_DEVICES(func) \ func(TI_MMC, ti_mmc, na) \ func(MMC, mmc, 0) \ @@ -265,24 +55,6 @@ #include <config_distro_bootcmd.h> #define CFG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "get_name_kern=" \ - "if test $boot_fit -eq 1; then " \ - "setenv bootfile fitImage; " \ - "else " \ - "setenv bootfile zImage; " \ - "fi\0" \ - DEFAULT_FIT_TI_ARGS \ - "get_fit_config=setenv name_fit_config ${fdtfile}\0" \ - DEFAULT_COMMON_BOOT_TI_ARGS \ - DEFAULT_FDT_TI_ARGS \ - GET_OVERLAY_MMC_TI_ARGS \ - DFUARGS \ - NETARGS \ - NANDARGS \ BOOTENV /* diff --git a/include/env/ti/dfu.env b/include/env/ti/dfu.env new file mode 100644 index 00000000000..b925730c6f5 --- /dev/null +++ b/include/env/ti/dfu.env @@ -0,0 +1,53 @@ +dfu_alt_info_mmc= + boot part 0 1; + rootfs part 0 2; + MLO fat 0 1; + MLO.raw raw 0x100 0x200; + u-boot.img.raw raw 0x300 0x1000; + u-env.raw raw 0x1300 0x200; + spl-os-args.raw raw 0x1500 0x200; + spl-os-image.raw raw 0x1700 0x6900; + spl-os-args fat 0 1; + spl-os-image fat 0 1; + u-boot.img fat 0 1; + uEnv.txt fat 0 1 + +dfu_alt_info_emmc= + rawemmc raw 0 3751936; + boot part 1 1; + rootfs part 1 2; + MLO fat 1 1; + MLO.raw raw 0x100 0x200; + u-boot.img.raw raw 0x300 0x1000; + u-env.raw raw 0x1300 0x200; + spl-os-args.raw raw 0x1500 0x200; + spl-os-image.raw raw 0x1700 0x6900; + spl-os-args fat 1 1; + spl-os-image fat 1 1; + u-boot.img fat 1 1; + uEnv.txt fat 1 1 + +#if CONFIG_MTD_RAW_NAND +dfu_alt_info_nand= + SPL part 0 1; + SPL.backup1 part 0 2; + SPL.backup2 part 0 3; + SPL.backup3 part 0 4; + u-boot part 0 5; + u-boot-spl-os part 0 6; + kernel part 0 8; + rootfs part 0 9 +#endif + +dfu_alt_info_ram= + kernel ram 0x80200000 0x4000000; + fdt ram 0x80f80000 0x80000; + ramdisk ram 0x81000000 0x4000000 + +dfu_alt_info_qspi= + MLO raw 0x0 0x040000; + u-boot.img raw 0x040000 0x0100000; + u-boot-spl-os raw 0x140000 0x080000; + u-boot-env raw 0x1C0000 0x010000; + u-boot-env.backup raw 0x1D0000 0x010000; + kernel raw 0x1E0000 0x800000 diff --git a/include/power/rk8xx_pmic.h b/include/power/rk8xx_pmic.h index 31221aa46b6..913b6ebe6d9 100644 --- a/include/power/rk8xx_pmic.h +++ b/include/power/rk8xx_pmic.h @@ -212,6 +212,8 @@ enum { #define RK817_POWER_EN_SAVE0 0x99 #define RK817_POWER_EN_SAVE1 0xa4 +#define RK806_RST_FUN_MSK GENMASK(7, 6) + #define RK806_POWER_EN(x) (0x00 + (x)) /* POWER_ENx register lower 4 bits are write-protected unless the associated top bit is set */ #define RK806_POWER_EN_CLRSETBITS(bit, val) (((val) << (bit)) | (1 << ((bit) + 4))) diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig index c2aa88f59fb..900113ca3e9 100644 --- a/lib/efi_loader/Kconfig +++ b/lib/efi_loader/Kconfig @@ -195,6 +195,7 @@ endchoice config EFI_VARIABLES_PRESEED bool "Initial values for UEFI variables" + depends on !COMPILE_TEST depends on !EFI_MM_COMM_TEE help Include a file with the initial values for non-volatile UEFI variables @@ -564,6 +565,7 @@ config EFI_HTTP_BOOT bool "EFI HTTP Boot support" depends on NET || NET_LWIP select CMD_NET + select CMD_DHCP select CMD_DNS select CMD_WGET select BLKMAP diff --git a/tools/buildman/buildman.rst b/tools/buildman/buildman.rst index 8c45a841024..9e850b26ec0 100644 --- a/tools/buildman/buildman.rst +++ b/tools/buildman/buildman.rst @@ -6,7 +6,7 @@ Buildman build tool Quick-start ----------- -If you just want to quickly set up buildman so you can build something (for +If you just want to quickly set up Buildman so you can build something (for example Raspberry Pi 2): .. code-block:: bash @@ -22,12 +22,12 @@ example Raspberry Pi 2): What is this? ------------- -This tool handles building U-Boot to check that you have not broken it -with your patch series. It can build each individual commit and report -which boards fail on which commits, and which errors come up. It aims -to make full use of multi-processor machines. +This tool builds U-Boot to check that you have not broken it with your +patch series. It can build each individual commit and report which boards +fail on which commits, and which errors come up. It aims to make full use +of multi-processor machines. -A key feature of buildman is its output summary, which allows warnings, +A key feature of Buildman is its output summary, which allows warnings, errors or image size increases in a particular commit or board to be quickly identified and the offending commit pinpointed. This can be a big help for anyone working with >10 patches at a time. @@ -63,7 +63,7 @@ can be run repeatedly on the same branch after making changes to commits on that branch. In this case it will automatically rebuild commits which have changed (and remove its old results for that commit). It is possible to build a branch for one board, then later build it for another board. This adds to -the output, so now you have results for two boards. If you want buildman to +the output, so now you have results for two boards. If you want Buildman to re-build a commit it has already built (e.g. because of a toolchain update), use the -f flag. @@ -81,9 +81,9 @@ a time. A thread starts at the first commit, configures the source for your board and builds it. Then it checks out the next commit and does an incremental build (i.e. not using 'make xxx_defconfig' unless you use -C). Eventually the thread reaches the last commit and stops. If a commit causes -an error or warning, buildman will try it again after reconfiguring (but see +an error or warning, Buildman will try it again after reconfiguring (but see -Q). Thus some commits may be built twice, with the first result silently -discarded. Lots of errors and warnings will causes lots of reconfigures and your +discarded. Lots of errors and warnings will cause lots of reconfigures and your build will be very slow. This is because a file that produces just a warning would not normally be rebuilt in an incremental build. Once a thread finishes building all the commits for a board, it starts on the commits for another @@ -100,14 +100,14 @@ threads do not affect the state of your git repository. Any checkouts done by the thread affect only the working directory for that thread. Buildman automatically selects the correct tool chain for each board. You -must supply suitable tool chains (see --fetch-arch), but buildman takes care -of selecting the right one. +must supply suitable tool chains (see ``--fetch-arch``), but Buildman takes +care of selecting the right one. Buildman generally builds a branch (with the -b flag), and in this case builds the upstream commit as well, for comparison. So even if you have one commit in your branch, two commits will be built. Put all your commits in a branch, set the branch's upstream to a valid value, and all will be well. -Otherwise buildman will perform random actions. Use -n to check what the +Otherwise Buildman will perform random actions. Use -n to check what the random actions might be. Buildman effectively has two modes: without -s it builds, with -s it @@ -115,7 +115,7 @@ summarises the results of previous (or active) builds. If you just want to build the current source tree, leave off the -b flag. This will display results and errors as they happen. You can still look at -them later using -se. Note that buildman will assume that the source has +them later using -se. Note that Buildman will assume that the source has changed, and will build all specified boards in this case. Buildman is optimised for building many commits at once, for many boards. @@ -153,9 +153,9 @@ You can also use -x to specifically exclude some boards. For example: means to build all arm boards except nvidia, freescale and anything ending with 'ball'. -For building specific boards you can use the --boards (or --bo) option, which -takes a comma-separated list of board target names and be used multiple times -on the command line: +For building specific boards you can use the ``--boards`` (or ``--bo``) option, +which takes a comma-separated list of board target names and can be used +multiple times on the command line: .. code-block:: bash @@ -183,7 +183,7 @@ Setting up git checkout -b my-branch origin/master # Add some commits to the branch, reading for testing -#. Create ~/.buildman to tell buildman where to find tool chains (see +#. Create ~/.buildman to tell Buildman where to find tool chains (see buildman_settings_ for details). As an example:: # Buildman settings file @@ -212,7 +212,7 @@ Setting up The toolchain-alias section indicates that the i386 toolchain should be used to build x86 commits. - Note that you can also specific exactly toolchain prefixes if you like:: + Note that you can also specify toolchain prefixes if you like:: [toolchain-prefix] arm: /opt/arm-eabi-4.6/bin/arm-eabi- @@ -222,18 +222,18 @@ Setting up [toolchain-prefix] arm: /opt/arm-eabi-4.6/bin/arm-eabi-gcc - This tells buildman that you want to use this exact toolchain for the arm + This tells Buildman that you want to use this exact toolchain for the arm architecture. This will override any toolchains found by searching using the [toolchain] settings. - Since the toolchain prefix is an explicit request, buildman will report an + Since the toolchain prefix is an explicit request, Buildman will report an error if a toolchain is not found with that prefix. The current PATH will be searched, so it is possible to use:: [toolchain-prefix] arm: arm-none-eabi- - and buildman will find arm-none-eabi-gcc in /usr/bin if you have it + and Buildman will find arm-none-eabi-gcc in /usr/bin if you have it installed. Another example:: @@ -241,11 +241,11 @@ Setting up [toolchain-wrapper] wrapper: ccache - This tells buildman to use a compiler wrapper in front of CROSS_COMPILE. In + This tells Buildman to use a compiler wrapper in front of CROSS_COMPILE. In this example, ccache. It doesn't affect the toolchain scan. The wrapper is - added when CROSS_COMPILE environtal variable is set. The name in this - section is ignored. If more than one line is provided, only the last one - is taken. + added when the CROSS_COMPILE environment variable is set. The tag name in + this section is not important. If more than one line is provided, only the + last one is used. #. Make sure you have the required Python pre-requisites @@ -440,7 +440,7 @@ Setting up You can download toolchains and update the [toolchain] section of the settings file to find them. - To make this easier, buildman can automatically download and install + To make this easier, Buildman can automatically download and install toolchains from kernel.org. First list the available architectures:: $ ./tools/buildman/buildman --fetch-arch list @@ -476,15 +476,28 @@ Setting up Buildman should now be set up to use your new toolchain. - At the time of writing, U-Boot has these architectures: + At the time of writing, U-Boot supports these architectures: - arc, arm, m68k, microblaze, mips, nios2, powerpc, sandbox, sh, x86, xtensa + - ARC (arc) + - ARM (arm) + - Motorola 68k (m68k) + - MicroBlaze (microblaze) + - MIPS (mips) + - Nios II (nios2) + - PowerPC (powerpc) + - RISC-V (riscv) + - Sandbox (sandbox) + - SuperH (sh) + - x86 (x86) + - Xtensa (xtensa) + + Each entry list the architecture's name, followed by its code name in U-Boot. How to run it ------------- -First do a dry run using the -n flag: (replace <branch> with a real, local +First do a dry run using the -n flag (replace <branch> with a real, local branch with a valid upstream): .. code-block:: bash @@ -492,7 +505,7 @@ branch with a valid upstream): ./tools/buildman/buildman -b <branch> -n If it can't detect the upstream branch, try checking out the branch, and -doing something like 'git branch --set-upstream-to upstream/master' +doing something like ``git branch --set-upstream-to upstream/master`` or something similar. Buildman will try to guess a suitable upstream branch if it can't find one (you will see a message like "Guessing upstream as ..."). You can also use the -c option to manually specify the number of commits to @@ -528,7 +541,7 @@ As an example:: This shows that it will build all 1059 boards, using 4 threads (because we have a 4-core CPU). Each thread will run with -j1, meaning that each make job will use a single CPU. The list of commits to be built helps you -confirm that things look about right. Notice that buildman has chosen a +confirm that things look about right. Notice that Buildman has chosen a 'base' directory for you, immediately above your source tree. Buildman works entirely inside the base directory, here ../lcd9b, @@ -640,7 +653,7 @@ But if you did want to see just the errors for lubbock, use: If you see error lines marked with '-', that means that the errors were fixed by that commit. Sometimes commits can be in the wrong order, so that a breakage is introduced for a few commits and fixed by later commits. This -shows up clearly with buildman. You can then reorder the commits and try +shows up clearly with Buildman. You can then reorder the commits and try again. At commit 16, the error moves: you can see that the old error at line 120 @@ -670,7 +683,7 @@ err Output from stderr, if any. Errors and warnings appear here. log - Output from stdout. Normally there isn't any since buildman runs in silent + Output from stdout. Normally there isn't any since Buildman runs in silent mode. Use -V to force a verbose build (this passes V=1 to 'make') toolchain @@ -731,17 +744,17 @@ Note that the 'text' region and 'rodata' are split out. You should add the two together to get the total read-only size (reported as the first column in the output from binutil's 'size' utility). -A useful option is --step which lets you skip some commits. For example ---step 2 will show the image sizes for only every 2nd commit (so it will +A useful option is ``--step`` which lets you skip some commits. For example +``--step 2`` will show the image sizes for only every 2nd commit (so it will compare the image sizes of the 1st, 3rd, 5th... commits). You can also use ---step 0 which will compare only the first and last commits. This is useful +``--step 0`` which will compare only the first and last commits. This is useful for an overview of how your entire series affects code size. It will build only the upstream commit and your final branch commit. You can also use -d to see a detailed size breakdown for each board. This list is sorted in order from largest growth to largest reduction. -It is even possible to go a little further with the -B option (--bloat). This +It is even possible to go a little further with the -B option (``--bloat``). This shows where U-Boot has bloated, breaking the size change down to the function level. Example output is below:: @@ -898,7 +911,7 @@ The .buildman settings file The .buildman file provides information about the available toolchains and also allows build flags to be passed to 'make'. It consists of several -sections, with the section name in square brackets. Within each section are +sections, with the section name in square brackets. Within each section there are a set of (tag, value) pairs. '[global]' section @@ -924,8 +937,8 @@ a set of (tag, value) pairs. This lists the available toolchains. The tag here doesn't matter, but make sure it is unique. The value is the path to the toolchain. Buildman will look in that path for a file ending in 'gcc'. It will then execute - it to check that it is a C compiler, passing only the --version flag to - it. If the return code is 0, buildman assumes that it is a valid C + it to check that it is a C compiler, passing only the ``--version`` flag to + it. If the return code is 0, Buildman assumes that it is a valid C compiler. It uses the first part of the name as the architecture and strips off the last part when setting the CROSS_COMPILE environment variable (parts are delimited with a hyphen). @@ -939,8 +952,7 @@ a set of (tag, value) pairs. '[toolchain-prefix]' section This can be used to provide the full toolchain-prefix for one or more architectures. The full CROSS_COMPILE prefix must be provided. These - typically have a higher priority than matches in the '[toolchain]', due to - this prefix. + typically have a higher priority than matches in the '[toolchain]'. The tilde character ``~`` is supported in paths, to represent the home directory. @@ -949,12 +961,12 @@ a set of (tag, value) pairs. This converts toolchain architecture names to U-Boot names. For example, if an x86 toolchains is called i386-linux-gcc it will not normally be used for architecture 'x86'. Adding 'x86: i386 x86_64' to this section - will tell buildman that the i386 and x86_64 toolchains can be used for + will tell Buildman that the i386 and x86_64 toolchains can be used for the x86 architecture. '[make-flags]' section U-Boot's build system supports a few flags (such as BUILD_TAG) which - affect the build product. These flags can be specified in the buildman + affect the build product. These flags can be specified in the Buildman settings file. They can also be useful when building U-Boot against other open source software. @@ -983,7 +995,7 @@ Quick Sanity Check ------------------ If you have made changes and want to do a quick sanity check of the -currently checked-out source, run buildman without the -b flag. This will +currently checked-out source, run Buildman without the -b flag. This will build the selected boards and display build status as it runs (i.e. -v is enabled automatically). Use -e to see errors/warnings as well. @@ -1002,29 +1014,29 @@ will build commits in us-buildman that are not in upstream/master. Building Faster --------------- -By default, buildman doesn't execute 'make mrproper' prior to building the +By default, Buildman doesn't execute 'make mrproper' prior to building the first commit for each board. This reduces the amount of work 'make' does, and hence speeds up the build. To force use of 'make mrproper', use -the -m flag. -This flag will slow down any buildman invocation, since it increases the amount -of work done on any build. An alternative is to use the --fallback-mrproper +This flag will slow down any Buildman invocation, since it increases the amount +of work done on any build. An alternative is to use the ``--fallback-mrproper`` flag, which retries the build with 'make mrproper' only after a build failure. -One possible application of buildman is as part of a continual edit, build, -edit, build, ... cycle; repeatedly applying buildman to the same change or +One possible application of Buildman is as part of a continual edit, build, +edit, build, ... cycle; repeatedly applying Buildman to the same change or series of changes while making small incremental modifications to the source each time. This provides quick feedback regarding the correctness of recent -modifications. In this scenario, buildman's default choice of build directory +modifications. In this scenario, Buildman's default choice of build directory causes more build work to be performed than strictly necessary. -By default, each buildman thread uses a single directory for all builds. When a +By default, each Buildman thread uses a single directory for all builds. When a thread builds multiple boards, the configuration built in this directory will cycle through various different configurations, one per board built by the thread. Variations in the configuration will force a rebuild of affected source -files when a thread switches between boards. Ideally, such buildman-induced +files when a thread switches between boards. Ideally, such Buildman-induced rebuilds would not happen, thus allowing the build to operate as efficiently as -the build system and source changes allow. buildman's -P flag may be used to +the build system and source changes allow. Buildman's -P flag may be used to enable this; -P causes each board to be built in a separate (board-specific) -directory, thus avoiding any buildman-induced configuration changes in any +directory, thus avoiding any Buildman-induced configuration changes in any build directory. U-Boot's build system embeds information such as a build timestamp into the @@ -1041,9 +1053,9 @@ of the source tree, thus allowing rapid tested evolution of the code:: ./tools/buildman/buildman -Pr tegra -Note also the `--dtc-skip` option which uses the system device-tree compiler to +Note also the ``--dtc-skip`` option which uses the system device-tree compiler to avoid needing to build it for each board. This can save 10-20% of build time. -An alternative is to set DTC=/path/to/dtc when running buildman. +An alternative is to set DTC=/path/to/dtc when running Buildman. Checking configuration ---------------------- @@ -1062,7 +1074,7 @@ For example:: + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET=1 + u-boot-spl.cfg: CONFIG_SPL_MMC=1 CONFIG_SPL_NAND_SUPPORT=1 + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET=1 - am335x_evm_usbspl : + am335x_evm_usbspl: + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET=1 + u-boot-spl.cfg: CONFIG_SPL_MMC=1 CONFIG_SPL_NAND_SUPPORT=1 + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET=1 @@ -1073,15 +1085,15 @@ This shows that commit 44 enabled three new options for the board am335x_evm_usbspl which were not enabled in commit 43. There is also a summary for 'arm' showing all the changes detected for that architecture. In this case there is only one board with changes, so 'arm' output is the -same as 'am335x_evm_usbspl'/ +same as 'am335x_evm_usbspl'. The -K option uses the u-boot.cfg, spl/u-boot-spl.cfg and tpl/u-boot-tpl.cfg files which are produced by a build. If all you want is to check the -configuration you can in fact avoid doing a full build, using --config-only. -This tells buildman to configuration U-Boot and create the .cfg files, but not +configuration you can in fact avoid doing a full build, using ``--config-only``. +This tells Buildman to configure U-Boot and create the .cfg files, but not actually build the source. This is 5-10 times faster than doing a full build. -By default buildman considers the follow two configuration methods +By default Buildman considers the following two configuration methods equivalent:: #define CONFIG_SOME_OPTION @@ -1089,9 +1101,9 @@ equivalent:: CONFIG_SOME_OPTION=y The former would appear in a header filer and the latter in a defconfig -file. The achieve this, buildman considers 'y' to be '1' in configuration +file. To achieve this, Buildman considers 'y' to be '1' in configuration variables. This avoids lots of useless output when converting a CONFIG -option to Kconfig. To disable this behaviour, use --squash-config-y. +option to Kconfig. To disable this behaviour, use ``--squash-config-y``. Checking the environment @@ -1120,7 +1132,7 @@ and 'brppt1_spi', removing a trailing semicolon. 'brppt1_nand' gained an a value for 'altbootcmd', but lost one for ' altbootcmd'. The -U option uses the u-boot.env files which are produced by a build. -Internally, buildman writes out an out-env file into the build directory for +Internally, Buildman writes out an out-env file into the build directory for later comparison. defconfig fragments @@ -1166,7 +1178,7 @@ Link-time optimisation (LTO) is designed to reduce code size by globally optimising the U-Boot build. Unfortunately this can dramatically slow down builds. This is particularly noticeable when running a lot of builds. -Use the -L (--no-lto) flag to disable LTO. +Use the -L (``--no-lto``) flag to disable LTO. .. code-block:: bash @@ -1176,7 +1188,7 @@ Use the -L (--no-lto) flag to disable LTO. Doing a simple build -------------------- -In some cases you just want to build a single board and get the full output, use +In case you want to build a single board and get the full output, use the -w option, for example: .. code-block:: bash @@ -1190,13 +1202,13 @@ specify the output directory with -o when using -w. Support for IDEs (Integrated Development Environments) ------------------------------------------------------ -Normally buildman summarises the output and shows information indicating the +Normally Buildman summarises the output and shows information indicating the meaning of each line of output. For example a '+' symbol appears at the start of -each error line. Also, buildman prints information about what it is about to do, +each error line. Also, Buildman prints information about what it is about to do, along with a summary at the end. -When using buildman from an IDE, it is helpful to drop this behaviour. Use the --I/--ide option for that. You might find -W helpful also so that warnings do +When using Buildman from an IDE, it is helpful to drop this behaviour. Use the +``-I/--ide`` option for that. You might also find -W helpful so that warnings do not cause the build to fail: .. code-block:: bash @@ -1215,12 +1227,12 @@ Typically a missing external blob causes a build failure. For build testing of a lot of boards, or boards for which you do not have the blobs, you can use the -M flag to allow missing blobs. This marks the build as if it succeeded, although with warnings shown, including 'Some images are invalid'. If any boards -fail in this way, buildman exits with status 101. +fail in this way, Buildman exits with status 101. -To convert warnings to errors, use -E. To make buildman return success with +To convert warnings to errors, use -E. To make Buildman return success with these warnings, use -W. -It is generally safe to default to enabling -M for all runs of buildman, so long +It is generally safe to default to enabling -M for all runs of Buildman, so long as you check the exit code. To do this, add:: allow-missing = "always" @@ -1261,11 +1273,12 @@ Some options have values, in which case you can change them: buildman -a 'BOOTCOMMAND="echo hello"' CONFIG_SYS_LOAD_ADDR=0x1000 -Note that you must put quotes around string options and the whole thing must be -in single quotes, to make sure the shell leave it alone. +Note that you must put quotes around string options and the whole argument must +be in single quotes to ensure that the shell recognizes it as a single +argument. If you try to set an option that does not exist, or that cannot be changed for -some other reason (e.g. it is 'selected' by another option), then buildman +some other reason (e.g. it is 'selected' by another option), then Buildman shows an error:: $ buildman --board sandbox -a FRED @@ -1279,18 +1292,18 @@ shows an error:: FRED Missing expected line: CONFIG_FRED=y -One major caveat with this feature with branches (-b) is that buildman does not +One major caveat with this feature with branches (-b) is that Buildman does not name the output directories differently when you change the configuration, so -doing the same build again with different configuration will not trigger a -rebuild. You can use -f to work around that. +re-launching Buildman with an updated configuration will not trigger a rebuild. +You can use -f to work around that. Other options ------------- -Buildman has various other command-line options. Try --help to see them. +Buildman has various other command-line options. Try ``--help`` to see them. -To find out what toolchain prefix buildman will use for a build, use the -A +To find out what toolchain prefix Buildman will use for a build, use the -A option. To request that compiler warnings be promoted to errors, use -E. This passes the @@ -1313,29 +1326,29 @@ warnings are found. Note that it can be useful to combine -E and -W. This means that all compiler warnings will produce failures (code 100) and all other warnings will produce success (since 101 is changed to 0). -If there are both warnings and errors, errors win, so buildman returns 100. +If there are both warnings and errors, errors win, so Buildman returns 100. The -y option is provided (for use with -s) to ignore the bountiful device-tree -warnings. Similarly, -Y tells buildman to ignore the migration warnings. +warnings. Similarly, -Y tells Buildman to ignore the migration warnings. -Sometimes you might get an error in a thread that is not handled by buildman, +Sometimes you might get an error in a thread that is not handled by Buildman, perhaps due to a failure of a tool that it calls. You might see the output, but -then buildman hangs. Failing to handle any eventuality is a bug in buildman and +then Buildman hangs. Failing to handle any eventuality is a bug in Buildman and should be reported. But you can use -T0 to disable threading and hopefully figure out the root cause of the build failure. -For situations where buildman is invoked from multiple running processes, it is -sometimes useful to have buildman wait until the others have finished. Use the ---process-limit option for this: --process-limit 1 will allow only one buildman -to process jobs at a time. +For situations where Buildman is invoked from multiple running processes, it is +sometimes useful to have Buildman wait until the others have finished. Use the +``--process-limit`` option for this: ``--process-limit 1`` will allow only one +Buildman to process jobs at a time. To build a particular target, rather than the default U-Boot target, use the -`--target` option. This is unlikely to be useful unless you are building a +``--target`` option. This is unlikely to be useful unless you are building a single board. Buildman normally builds out-of-tree, meaning that the source directory is not disturbed by the build. Use `-i` to do an in-tree build instead. Note that this -does not affect the source directory, since buildman creates a separate git +does not affect the source directory, since Buildman creates a separate git 'worktree' for each board. This means that it is possible to do an in-tree build of an entire branch, or even a 'current source' build for multiple boards. As a special case, you can use `-wi` to do an in-tree build in the current @@ -1344,7 +1357,7 @@ directory. Build summary ------------- -When buildman finishes it shows a summary, something like this:: +When Buildman finishes, it displays a summary, similar to the following: Completed: 5 total built, duration 0:00:21, rate 0.24 @@ -1357,14 +1370,14 @@ U-Boot build. Using boards.cfg ---------------- -This file is no-longer needed by buildman but it is still generated in the +This file is no-longer needed by Buildman but it is still generated in the working directory. This helps avoid a delay on every build, since scanning all -the Kconfig files takes a few seconds. Use the `-R <filename>` flag to force -regeneration of the file - in that case buildman exits after writing the file +the Kconfig files takes a few seconds. Use the ``-R <filename>`` flag to force +regeneration of the file - in that case Buildman exits after writing the file with exit code 2 if there was an error in the maintainer files. To use the default filename, use a hyphen, i.e. `-R -`. -You should use 'buildman -nv <criteria>' instead of greoing the boards.cfg file, +You should use 'buildman -nv <criteria>' instead of greping the boards.cfg file, since it may be dropped altogether in future. @@ -1372,16 +1385,16 @@ Checking maintainers -------------------- Sometimes a board is added without a corresponding entry in a MAINTAINERS file. -Use the `--maintainer-check` option to check this:: +Use the ``--maintainer-check`` option to check this:: $ buildman --maintainer-check WARNING: board/mikrotik/crs3xx-98dx3236/MAINTAINERS: missing defconfig ending at line 7 WARNING: no maintainers for 'clearfog_spi' -Buildman returns with an exit code of 2 if there area any warnings. +Buildman returns with an exit code of 2 if there are any warnings. -An experimental `--full-check option` also checks for boards which don't have a -CONFIG_TARGET_xxx where xxx corresponds to their defconfig filename. This is +An experimental ``--full-check option`` also checks for boards which don't have +a CONFIG_TARGET_xxx where xxx corresponds to their defconfig filename. This is not strictly necessary, but may be useful information. |