diff options
| -rw-r--r-- | Makefile | 19 | ||||
| -rw-r--r-- | arch/powerpc/dts/kmcent2-u-boot.dtsi | 2 | ||||
| -rw-r--r-- | arch/powerpc/dts/u-boot.dtsi | 2 | ||||
| -rw-r--r-- | board/freescale/p1_p2_rdb_pc/README | 2 | ||||
| -rw-r--r-- | board/freescale/p2041rdb/README | 3 | ||||
| -rw-r--r-- | board/freescale/t102xrdb/README | 2 | ||||
| -rw-r--r-- | board/freescale/t104xrdb/README | 2 | ||||
| -rwxr-xr-x | board/freescale/t208xqds/README | 2 | ||||
| -rw-r--r-- | board/freescale/t208xrdb/README | 2 |
9 files changed, 12 insertions, 24 deletions
@@ -997,10 +997,6 @@ ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy) INPUTS-y += init_sp_bss_offset_check endif -ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) -INPUTS-y += u-boot-with-dtb.bin -endif - ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy) # Binman image dependencies ifeq ($(CONFIG_ARM64),y) @@ -1217,9 +1213,12 @@ else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.) u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE $(call if_changed,cat) +ifneq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) u-boot.bin: u-boot-dtb.bin FORCE $(call if_changed,copy) -else +endif + +else ifneq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) u-boot.bin: u-boot-nodtb.bin FORCE $(call if_changed,copy) endif @@ -1432,11 +1431,7 @@ MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -A $(ARCH) -T pblimage -ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) -UBOOT_BIN := u-boot-with-dtb.bin -else UBOOT_BIN := u-boot.bin -endif MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ @@ -1604,7 +1599,7 @@ u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE endif ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) -u-boot-with-dtb.bin: u-boot-nodtb.bin u-boot.dtb \ +u-boot.bin: u-boot-nodtb.bin u-boot.dtb \ $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE $(call if_changed,binman) @@ -1670,12 +1665,8 @@ spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE ifeq ($(ARCH),arm) UBOOT_BINLOAD := u-boot.img else -ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) -UBOOT_BINLOAD := u-boot-with-dtb.bin -else UBOOT_BINLOAD := u-boot.bin endif -endif OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ --gap-fill=0xff diff --git a/arch/powerpc/dts/kmcent2-u-boot.dtsi b/arch/powerpc/dts/kmcent2-u-boot.dtsi index ab76a9f1226..eeaa688b657 100644 --- a/arch/powerpc/dts/kmcent2-u-boot.dtsi +++ b/arch/powerpc/dts/kmcent2-u-boot.dtsi @@ -76,7 +76,7 @@ }; binman { - filename = "u-boot-with-dtb.bin"; + filename = "u-boot.bin"; skip-at-start = <CONFIG_SYS_TEXT_BASE>; sort-by-offset; pad-byte = <0xff>; diff --git a/arch/powerpc/dts/u-boot.dtsi b/arch/powerpc/dts/u-boot.dtsi index 67de476a45e..0251afddca8 100644 --- a/arch/powerpc/dts/u-boot.dtsi +++ b/arch/powerpc/dts/u-boot.dtsi @@ -7,7 +7,7 @@ / { binman { - filename = "u-boot-with-dtb.bin"; + filename = "u-boot.bin"; skip-at-start = <CONFIG_SYS_TEXT_BASE>; sort-by-offset; pad-byte = <0xff>; diff --git a/board/freescale/p1_p2_rdb_pc/README b/board/freescale/p1_p2_rdb_pc/README index 86ff04e69d9..f542decec79 100644 --- a/board/freescale/p1_p2_rdb_pc/README +++ b/board/freescale/p1_p2_rdb_pc/README @@ -60,5 +60,5 @@ enabled in relative defconfig file, CONFIG_RESET_VECTOR_ADDRESS - 0xffc If device tree support is enabled in defconfig, -1. use 'u-boot-with-dtb.bin' for NOR boot. +1. use 'u-boot.bin' for NOR boot. 2. use 'u-boot-with-spl.bin' for other boot. diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README index 79f77e49612..96612daeeb1 100644 --- a/board/freescale/p2041rdb/README +++ b/board/freescale/p2041rdb/README @@ -100,9 +100,6 @@ enabled in relative defconfig file, 3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at CONFIG_RESET_VECTOR_ADDRESS - 0xffc -If device tree support is enabled in defconfig, use 'u-boot-with-dtb.bin' -instead of u-boot.bin for all boot. - CPLD command ============ The CPLD is used to control the power sequence and some serdes lane diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README index 84deb9562a1..de170f52b4d 100644 --- a/board/freescale/t102xrdb/README +++ b/board/freescale/t102xrdb/README @@ -267,7 +267,7 @@ enabled in relative defconfig file, config_reset_vector_address - 0xffc if device tree support is enabled in defconfig, -1. use 'u-boot-with-dtb.bin' for nor boot. +1. use 'u-boot.bin' for nor boot. 2. use 'u-boot-with-spl-pbl.bin' for other boot. 2-stage NAND/SPI/SD boot loader diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README index 09cb98e33d6..e90dca41663 100644 --- a/board/freescale/t104xrdb/README +++ b/board/freescale/t104xrdb/README @@ -382,5 +382,5 @@ enabled in relative defconfig file, CONFIG_RESET_VECTOR_ADDRESS - 0xffc If device tree support is enabled in defconfig, -1. use 'u-boot-with-dtb.bin' for NOR boot. +1. use 'u-boot.bin' for NOR boot. 2. use 'u-boot-with-spl-pbl.bin' for other boot. diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README index 75d317342f6..63953d6b9b6 100755 --- a/board/freescale/t208xqds/README +++ b/board/freescale/t208xqds/README @@ -288,5 +288,5 @@ enabled in relative defconfig file, CONFIG_RESET_VECTOR_ADDRESS - 0xffc If device tree support is enabled in defconfig, -1. use 'u-boot-with-dtb.bin' for NOR boot. +1. use 'u-boot.bin' for NOR boot. 2. use 'u-boot-with-spl-pbl.bin' for other boot. diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README index c4bfd3b466f..60551f6723e 100644 --- a/board/freescale/t208xrdb/README +++ b/board/freescale/t208xrdb/README @@ -284,5 +284,5 @@ enabled in relative defconfig file, CONFIG_RESET_VECTOR_ADDRESS - 0xffc If device tree support is enabled in defconfig, -1. use 'u-boot-with-dtb.bin' for NOR boot. +1. use 'u-boot.bin' for NOR boot. 2. use 'u-boot-with-spl-pbl.bin' for other boot. |