diff options
441 files changed, 5148 insertions, 7454 deletions
diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml index d6f3fa423c6..b9d6aa98a0b 100644 --- a/.azure-pipelines.yml +++ b/.azure-pipelines.yml @@ -287,9 +287,6 @@ stages: sandbox64_clang: TEST_PY_BD: "sandbox64" OVERRIDE: "-O clang-16" - sandbox_nolto: - TEST_PY_BD: "sandbox" - BUILD_ENV: "NO_LTO=1" sandbox_spl: TEST_PY_BD: "sandbox_spl" TEST_PY_TEST_SPEC: "test_ofplatdata or test_handoff or test_spl" diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index fee165198ae..fbf99f0322a 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -258,12 +258,6 @@ sandbox with clang test.py: OVERRIDE: "-O clang-16" <<: *buildman_and_testpy_dfn -sandbox without LTO test.py: - variables: - TEST_PY_BD: "sandbox" - BUILD_ENV: "NO_LTO=1" - <<: *buildman_and_testpy_dfn - sandbox64 test.py: variables: TEST_PY_BD: "sandbox64" @@ -275,12 +269,6 @@ sandbox64 with clang test.py: OVERRIDE: "-O clang-16" <<: *buildman_and_testpy_dfn -sandbox64 without LTO test.py: - variables: - TEST_PY_BD: "sandbox64" - BUILD_ENV: "NO_LTO=1" - <<: *buildman_and_testpy_dfn - sandbox_spl test.py: variables: TEST_PY_BD: "sandbox_spl" @@ -851,7 +851,7 @@ HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makef libs-$(CONFIG_API) += api/ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ libs-y += boot/ -libs-y += cmd/ +libs-$(CONFIG_CMDLINE) += cmd/ libs-y += common/ libs-$(CONFIG_OF_EMBED) += dts/ libs-y += env/ @@ -1153,7 +1153,6 @@ endif @# is enable to tell 'deprecated' that one of these symbols exists $(call deprecated,CONFIG_TIMER,Timer drivers,v2023.01,$(if $(strip $(CFG_SYS_TIMER_RATE)$(CFG_SYS_TIMER_COUNTER)),x)) $(call deprecated,CONFIG_DM_SERIAL,Serial drivers,v2023.04,$(CONFIG_SERIAL)) - $(call deprecated,CONFIG_DM_SCSI,SCSI drivers,v2023.04,$(CONFIG_SCSI)) @# Check that this build does not override OF_HAS_PRIOR_STAGE by @# disabling OF_BOARD. $(call cmd,ofcheck,$(KCONFIG_CONFIG)) @@ -1191,11 +1191,10 @@ The following options need to be configured: Support for a lightweight UBI (fastmap) scanner and loader - CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT, - CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE, - CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS, - CFG_SYS_NAND_ECCPOS, CFG_SYS_NAND_ECCSIZE, - CFG_SYS_NAND_ECCBYTES + CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_SIZE, + CONFIG_SYS_NAND_OOBSIZE, CONFIG_SYS_NAND_BLOCK_SIZE, + CONFIG_SYS_NAND_BAD_BLOCK_POS, CFG_SYS_NAND_ECCPOS, + CFG_SYS_NAND_ECCSIZE, CFG_SYS_NAND_ECCBYTES Defines the size and behavior of the NAND that SPL uses to read U-Boot diff --git a/api/api_storage.c b/api/api_storage.c index 997e8727a96..78becbe39fb 100644 --- a/api/api_storage.c +++ b/api/api_storage.c @@ -67,13 +67,6 @@ void dev_stor_init(void) specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA; specs[ENUM_SATA].name = "sata"; #endif -#if defined(CONFIG_SCSI) - specs[ENUM_SCSI].max_dev = SCSI_MAX_DEVICE; - specs[ENUM_SCSI].enum_started = 0; - specs[ENUM_SCSI].enum_ended = 0; - specs[ENUM_SCSI].type = DEV_TYP_STOR | DT_STOR_SCSI; - specs[ENUM_SCSI].name = "scsi"; -#endif #if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE) specs[ENUM_USB].max_dev = USB_MAX_STOR_DEV; specs[ENUM_USB].enum_started = 0; diff --git a/arch/Kconfig b/arch/Kconfig index 4f5b75129f3..2e0528d819c 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -134,7 +134,7 @@ config SANDBOX select ARCH_SUPPORTS_LTO select BOARD_LATE_INIT select BZIP2 - select CMD_POWEROFF + select CMD_POWEROFF if CMDLINE select DM select DM_EVENT select DM_FUZZING_ENGINE @@ -152,10 +152,10 @@ config SANDBOX select PCI_ENDPOINT select SPI select SUPPORT_OF_CONTROL - select SYSRESET_CMD_POWEROFF + select SYSRESET_CMD_POWEROFF if CMD_POWEROFF select SYS_CACHE_SHIFT_4 select IRQ - select SUPPORT_EXTENSION_SCAN + select SUPPORT_EXTENSION_SCAN if CMDLINE select SUPPORT_ACPI imply BITREVERSE select BLOBLIST @@ -210,6 +210,9 @@ config SANDBOX imply BINMAN imply CMD_MBR imply CMD_MMC + imply BOOTSTD_DEFAULTS if BOOTSTD_FULL && CMDLINE + imply BOOTMETH_DISTRO if BOOTSTD_FULL && CMDLINE + imply CMD_SYSBOOT if BOOTSTD_FULL config SH bool "SuperH architecture" @@ -248,7 +251,7 @@ config X86 imply DM_KEYBOARD imply DM_MMC imply DM_RTC - imply DM_SCSI + imply SCSI imply DM_SERIAL imply DM_SPI imply DM_SPI_FLASH diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d812685c984..1fd7aacc380 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -568,6 +568,7 @@ config ARCH_AT91 select GPIO_EXTRA_HEADER select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB select SPL_SEPARATE_BSS if SPL + imply SYS_THUMB_BUILD config ARCH_DAVINCI bool "TI DaVinci" @@ -1133,7 +1134,6 @@ config ARCH_SUNXI select DM_SPI_FLASH if SPI select DM_KEYBOARD select DM_MMC if MMC - select DM_SCSI if SCSI select DM_SERIAL select OF_BOARD_SETUP select OF_CONTROL @@ -1838,7 +1838,7 @@ config TARGET_SL28 select PCI select DM_RNG select DM_RTC - select DM_SCSI + select SCSI select DM_SERIAL select DM_SPI select GPIO_EXTRA_HEADER @@ -1945,7 +1945,7 @@ config ARCH_STM32MP select REGMAP select SYSCON select SYSRESET - select SYS_THUMB_BUILD + select SYS_THUMB_BUILD if !ARM64 imply SPL_SYSRESET imply CMD_DM imply CMD_POWEROFF @@ -2053,7 +2053,6 @@ config TARGET_POMELO select PCI select DM_PCI select SCSI - select DM_SCSI select DM_SERIAL imply CMD_PCI help diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 1be08c5fdc2..20767659376 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1381,6 +1381,9 @@ dtb-$(CONFIG_STM32MP15x) += \ stm32mp15xx-dhcor-drc-compact.dtb \ stm32mp15xx-dhcor-testbench.dtb +dtb-$(CONFIG_STM32MP25X) += \ + stm32mp257f-ev1.dtb + dtb-$(CONFIG_SOC_K3_AM654) += \ k3-am654-base-board.dtb \ k3-am654-r5-base-board.dtb \ diff --git a/arch/arm/dts/stm32mp25-pinctrl.dtsi b/arch/arm/dts/stm32mp25-pinctrl.dtsi new file mode 100644 index 00000000000..d34a1d5e79c --- /dev/null +++ b/arch/arm/dts/stm32mp25-pinctrl.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +&pinctrl { + usart2_pins_a: usart2-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF8)>; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_idle_pins_a: usart2-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>; /* USART2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF8)>; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('A', 8, ANALOG)>; /* USART2_RX */ + }; + }; +}; diff --git a/arch/arm/dts/stm32mp25-u-boot.dtsi b/arch/arm/dts/stm32mp25-u-boot.dtsi new file mode 100644 index 00000000000..f4f26add2a4 --- /dev/null +++ b/arch/arm/dts/stm32mp25-u-boot.dtsi @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright : STMicroelectronics 2023 + */ + +/ { + aliases { + gpio0 = &gpioa; + gpio1 = &gpiob; + gpio2 = &gpioc; + gpio3 = &gpiod; + gpio4 = &gpioe; + gpio5 = &gpiof; + gpio6 = &gpiog; + gpio7 = &gpioh; + gpio8 = &gpioi; + gpio9 = &gpioj; + gpio10 = &gpiok; + gpio25 = &gpioz; + pinctrl0 = &pinctrl; + pinctrl1 = &pinctrl_z; + }; + + firmware { + optee { + bootph-all; + }; + }; + + /* need PSCI for sysreset during board_f */ + psci { + bootph-all; + }; + + soc@0 { + bootph-all; + }; +}; + +&gpioa { + bootph-all; +}; + +&gpiob { + bootph-all; +}; + +&gpioc { + bootph-all; +}; + +&gpiod { + bootph-all; +}; + +&gpioe { + bootph-all; +}; + +&gpiof { + bootph-all; +}; + +&gpiog { + bootph-all; +}; + +&gpioh { + bootph-all; +}; + +&gpioi { + bootph-all; +}; + +&gpioj { + bootph-all; +}; + +&gpiok { + bootph-all; +}; + +&gpioz { + bootph-all; +}; + +&pinctrl { + bootph-all; +}; + +&rifsc { + bootph-all; +}; + +&scmi_clk { + bootph-all; +}; + +&syscfg { + bootph-all; +}; diff --git a/arch/arm/dts/stm32mp251.dtsi b/arch/arm/dts/stm32mp251.dtsi new file mode 100644 index 00000000000..cf2f28dc158 --- /dev/null +++ b/arch/arm/dts/stm32mp251.dtsi @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a35"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a35-pmu"; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + interrupt-parent = <&intc>; + }; + + arm_wdt: watchdog { + compatible = "arm,smc-wdt"; + arm,smc-id = <0xb200005a>; + status = "disabled"; + }; + + clocks { + ck_flexgen_08: ck-flexgen-08 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + ck_flexgen_51: ck-flexgen-51 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + + ck_icn_ls_mcu: ck-icn-ls-mcu { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + }; + }; + + intc: interrupt-controller@4ac00000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x0 0x4ac10000 0x0 0x1000>, + <0x0 0x4ac20000 0x0 0x2000>, + <0x0 0x4ac40000 0x0 0x2000>, + <0x0 0x4ac60000 0x0 0x2000>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + always-on; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges = <0x0 0x0 0x0 0x80000000>; + + rifsc: rifsc-bus@42080000 { + compatible = "simple-bus"; + reg = <0x42080000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usart2: serial@400e0000 { + compatible = "st,stm32h7-uart"; + reg = <0x400e0000 0x400>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ck_flexgen_08>; + status = "disabled"; + }; + }; + + syscfg: syscon@44230000 { + compatible = "st,stm32mp25-syscfg", "syscon"; + reg = <0x44230000 0x10000>; + }; + + pinctrl: pinctrl@44240000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp257-pinctrl"; + ranges = <0 0x44240000 0xa0400>; + pins-are-numbered; + + gpioa: gpio@44240000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio@44250000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x10000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio@44260000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio@44270000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x30000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio@44280000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio@44290000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x50000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio@442a0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x60000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio@442b0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x70000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio@442c0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x80000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio@442d0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x90000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio@442e0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa0000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + }; + + pinctrl_z: pinctrl@46200000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp257-z-pinctrl"; + ranges = <0 0x46200000 0x400>; + pins-are-numbered; + + gpioz: gpio@46200000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + + }; + }; +}; diff --git a/arch/arm/dts/stm32mp253.dtsi b/arch/arm/dts/stm32mp253.dtsi new file mode 100644 index 00000000000..af48e82efe8 --- /dev/null +++ b/arch/arm/dts/stm32mp253.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include "stm32mp251.dtsi" + +/ { + cpus { + cpu1: cpu@1 { + compatible = "arm,cortex-a35"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + }; + }; + + arm-pmu { + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm/dts/stm32mp255.dtsi b/arch/arm/dts/stm32mp255.dtsi new file mode 100644 index 00000000000..e6fa596211f --- /dev/null +++ b/arch/arm/dts/stm32mp255.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include "stm32mp253.dtsi" + +/ { +}; diff --git a/arch/arm/dts/stm32mp257.dtsi b/arch/arm/dts/stm32mp257.dtsi new file mode 100644 index 00000000000..5c5000d3d9d --- /dev/null +++ b/arch/arm/dts/stm32mp257.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include "stm32mp255.dtsi" + +/ { +}; diff --git a/arch/arm/dts/stm32mp257f-ev1-u-boot.dtsi b/arch/arm/dts/stm32mp257f-ev1-u-boot.dtsi new file mode 100644 index 00000000000..a35a9b90388 --- /dev/null +++ b/arch/arm/dts/stm32mp257f-ev1-u-boot.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + */ + +#include "stm32mp25-u-boot.dtsi" + +&usart2 { + bootph-all; +}; + +&usart2_pins_a { + bootph-all; + pins1 { + bootph-all; + }; + pins2 { + bootph-all; + }; +}; diff --git a/arch/arm/dts/stm32mp257f-ev1.dts b/arch/arm/dts/stm32mp257f-ev1.dts new file mode 100644 index 00000000000..a88494eed34 --- /dev/null +++ b/arch/arm/dts/stm32mp257f-ev1.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp257.dtsi" +#include "stm32mp25xf.dtsi" +#include "stm32mp25-pinctrl.dtsi" +#include "stm32mp25xxai-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP257F-EV1 Evaluation Board"; + compatible = "st,stm32mp257f-ev1", "st,stm32mp257"; + + aliases { + serial0 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + fw@80000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x80000000 0x0 0x4000000>; + no-map; + }; + }; +}; + +&arm_wdt { + timeout-sec = <32>; + status = "okay"; +}; + +&usart2 { + pinctrl-names = "default", "idle", "sleep"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_idle_pins_a>; + pinctrl-2 = <&usart2_sleep_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/stm32mp25xc.dtsi b/arch/arm/dts/stm32mp25xc.dtsi new file mode 100644 index 00000000000..5e83a692648 --- /dev/null +++ b/arch/arm/dts/stm32mp25xc.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/ { +}; diff --git a/arch/arm/dts/stm32mp25xf.dtsi b/arch/arm/dts/stm32mp25xf.dtsi new file mode 100644 index 00000000000..5e83a692648 --- /dev/null +++ b/arch/arm/dts/stm32mp25xf.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/ { +}; diff --git a/arch/arm/dts/stm32mp25xxai-pinctrl.dtsi b/arch/arm/dts/stm32mp25xxai-pinctrl.dtsi new file mode 100644 index 00000000000..abdbc7aebc7 --- /dev/null +++ b/arch/arm/dts/stm32mp25xxai-pinctrl.dtsi @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AI>; + + gpioa: gpio@44240000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@44250000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@44260000 { + status = "okay"; + ngpios = <14>; + gpio-ranges = <&pinctrl 0 32 14>; + }; + + gpiod: gpio@44270000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@44280000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@44290000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@442a0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@442b0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 2 114 12>; + }; + + gpioi: gpio@442c0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@442d0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@442e0000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; +}; + +&pinctrl_z { + gpioz: gpio@46200000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl_z 0 400 10>; + }; +}; diff --git a/arch/arm/dts/stm32mp25xxak-pinctrl.dtsi b/arch/arm/dts/stm32mp25xxak-pinctrl.dtsi new file mode 100644 index 00000000000..2e0d4d349d1 --- /dev/null +++ b/arch/arm/dts/stm32mp25xxak-pinctrl.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AK>; + + gpioa: gpio@44240000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@44250000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@44260000 { + status = "okay"; + ngpios = <14>; + gpio-ranges = <&pinctrl 0 32 14>; + }; + + gpiod: gpio@44270000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@44280000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@44290000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@442a0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@442b0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 2 114 12>; + }; + + gpioi: gpio@442c0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + gpioz: gpio@46200000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl_z 0 400 10>; + }; +}; diff --git a/arch/arm/dts/stm32mp25xxal-pinctrl.dtsi b/arch/arm/dts/stm32mp25xxal-pinctrl.dtsi new file mode 100644 index 00000000000..2406e972554 --- /dev/null +++ b/arch/arm/dts/stm32mp25xxal-pinctrl.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AL>; + + gpioa: gpio@44240000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@44250000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@44260000 { + status = "okay"; + ngpios = <14>; + gpio-ranges = <&pinctrl 0 32 14>; + }; + + gpiod: gpio@44270000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@44280000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@44290000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@442a0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@442b0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 2 114 12>; + }; + + gpioi: gpio@442c0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + gpioz: gpio@46200000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl_z 0 400 10>; + }; +}; diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h index 3f0182e7665..d2fbf919a5b 100644 --- a/arch/arm/include/asm/arch-omap3/cpu.h +++ b/arch/arm/include/asm/arch-omap3/cpu.h @@ -7,6 +7,7 @@ #ifndef _CPU_H #define _CPU_H +#include <asm/arch/omap.h> #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 0eae857e73a..43f7503571d 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -513,14 +513,6 @@ enum dcache_option { }; #endif -#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) -#define DCACHE_DEFAULT_OPTION DCACHE_WRITETHROUGH -#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC) -#define DCACHE_DEFAULT_OPTION DCACHE_WRITEALLOC -#elif defined(CONFIG_SYS_ARM_CACHE_WRITEBACK) -#define DCACHE_DEFAULT_OPTION DCACHE_WRITEBACK -#endif - /* Size of an MMU section */ enum { #ifdef CONFIG_ARMV7_LPAE @@ -578,6 +570,14 @@ void psci_system_reset(void); #endif /* CONFIG_ARM64 */ +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) +#define DCACHE_DEFAULT_OPTION DCACHE_WRITETHROUGH +#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC) +#define DCACHE_DEFAULT_OPTION DCACHE_WRITEALLOC +#elif defined(CONFIG_SYS_ARM_CACHE_WRITEBACK) +#define DCACHE_DEFAULT_OPTION DCACHE_WRITEBACK +#endif + #ifndef __ASSEMBLY__ /** * save_boot_params() - Save boot parameters before starting reset sequence diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c index 6dc27d1d589..9961472f69f 100644 --- a/arch/arm/lib/interrupts.c +++ b/arch/arm/lib/interrupts.c @@ -22,6 +22,7 @@ #include <cpu_func.h> #include <efi_loader.h> #include <irq_func.h> +#include <semihosting.h> #include <asm/global_data.h> #include <asm/proc-armv/ptrace.h> #include <asm/ptrace.h> @@ -135,6 +136,32 @@ static inline void fixup_pc(struct pt_regs *regs, int offset) regs->ARM_pc = pc | (regs->ARM_pc & PCMASK); } +/* + * Try to "emulate" a semihosting call in the event that we don't have a + * debugger attached. + */ +static bool smh_emulate_trap(struct pt_regs *regs) +{ + if (regs->ARM_cpsr & T_BIT) { + u16 *insn = (u16 *)(regs->ARM_pc - 2); + + if (*insn != SMH_T32_SVC) + return false; + } else { + u32 *insn = (u32 *)(regs->ARM_pc - 4); + + if (*insn != SMH_A32_SVC) + return false; + } + + /* Avoid future semihosting calls */ + disable_semihosting(); + + /* Just pretend the call failed */ + regs->ARM_r0 = -1; + return true; +} + void do_undefined_instruction (struct pt_regs *pt_regs) { efi_restore_gd(); @@ -147,6 +174,10 @@ void do_undefined_instruction (struct pt_regs *pt_regs) void do_software_interrupt (struct pt_regs *pt_regs) { + if (CONFIG_IS_ENABLED(SEMIHOSTING_FALLBACK) && + smh_emulate_trap(pt_regs)) + return; + efi_restore_gd(); printf ("software interrupt\n"); fixup_pc(pt_regs, -4); diff --git a/arch/arm/lib/semihosting.S b/arch/arm/lib/semihosting.S index 393aade94a5..6e1691a832c 100644 --- a/arch/arm/lib/semihosting.S +++ b/arch/arm/lib/semihosting.S @@ -18,11 +18,17 @@ ENTRY(smh_trap) #elif defined(CONFIG_SYS_THUMB_BUILD) svc #0xab #else +#if CONFIG_SYS_ARM_ARCH < 7 + /* Before the ARMv7 exception model, svc (swi) clobbers lr */ + mov r2, lr +#endif svc #0x123456 #endif #if defined(CONFIG_ARM64) ret +#elif CONFIG_SYS_ARM_ARCH < 7 + bx r2 #else bx lr #endif diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S index 7cf7d1636f5..843f9b9c281 100644 --- a/arch/arm/lib/vectors.S +++ b/arch/arm/lib/vectors.S @@ -240,6 +240,18 @@ IRQ_STACK_START_IN: movs pc, lr @ jump to next instruction & switch modes. .endm + .macro get_bad_stack_swi + sub r13, r13, #4 @ space on current stack for scratch reg. + str r0, [r13] @ save R0's value. + ldr r0, IRQ_STACK_START_IN @ get data regions start + str lr, [r0] @ save caller lr in position 0 of saved stack + mrs lr, spsr @ get the spsr + str lr, [r0, #4] @ save spsr in position 1 of saved stack + ldr lr, [r0] @ restore lr + ldr r0, [r13] @ restore r0 + add r13, r13, #4 @ pop stack entry + .endm + .macro get_irq_stack @ setup IRQ stack ldr sp, IRQ_STACK_START .endm @@ -260,9 +272,16 @@ undefined_instruction: .align 5 software_interrupt: - get_bad_stack + get_bad_stack_swi bad_save_user_regs bl do_software_interrupt +#if CONFIG_IS_ENABLED(SEMIHOSTING_FALLBACK) + ldmia sp, {r0 - lr}^ @ Calling r0 - lr + mov r0, r0 + ldr lr, [sp, #S_PC] @ Get PC + add sp, sp, #S_FRAME_SIZE + movs pc, lr @ return & move spsr_svc into cpsr +#endif .align 5 prefetch_abort: diff --git a/arch/arm/mach-davinci/include/mach/dm365_lowlevel.h b/arch/arm/mach-davinci/include/mach/dm365_lowlevel.h index eb1488e7442..0cd13d8aaa5 100644 --- a/arch/arm/mach-davinci/include/mach/dm365_lowlevel.h +++ b/arch/arm/mach-davinci/include/mach/dm365_lowlevel.h @@ -8,7 +8,6 @@ #ifndef __DM365_LOWLEVEL_H #define __DM365_LOWLEVEL_H -#include <common.h> #include <asm/arch/hardware.h> #include <asm/io.h> diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 7529b311f80..50a9c3e4203 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -246,7 +246,7 @@ config TARGET_KOSAGI_NOVENA select DM_GPIO select DM_MMC select PCI - select DM_SCSI + select SCSI select VIDEO select OF_CONTROL select SUPPORT_SPL diff --git a/arch/arm/mach-imx/spl_imx_romapi.c b/arch/arm/mach-imx/spl_imx_romapi.c index 5eb5a3d3c4a..b9ff9bb83b3 100644 --- a/arch/arm/mach-imx/spl_imx_romapi.c +++ b/arch/arm/mach-imx/spl_imx_romapi.c @@ -53,16 +53,10 @@ static int is_boot_from_stream_device(u32 boot) } static ulong spl_romapi_read_seekable(struct spl_load_info *load, - ulong sector, ulong count, + ulong offset, ulong byte, void *buf) { - u32 pagesize = *(u32 *)load->priv; - ulong byte = count * pagesize; - u32 offset; - - offset = sector * pagesize; - - return spl_romapi_raw_seekable_read(offset, byte, buf) / pagesize; + return spl_romapi_raw_seekable_read(offset, byte, buf); } static int spl_romapi_load_image_seekable(struct spl_image_info *spl_image, @@ -107,20 +101,18 @@ static int spl_romapi_load_image_seekable(struct spl_image_info *spl_image, struct spl_load_info load; memset(&load, 0, sizeof(load)); - load.bl_len = pagesize; + spl_set_bl_len(&load, pagesize); load.read = spl_romapi_read_seekable; - load.priv = &pagesize; - return spl_load_simple_fit(spl_image, &load, offset / pagesize, header); + return spl_load_simple_fit(spl_image, &load, offset, header); } else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER) && valid_container_hdr((void *)header)) { struct spl_load_info load; memset(&load, 0, sizeof(load)); - load.bl_len = pagesize; + spl_set_bl_len(&load, pagesize); load.read = spl_romapi_read_seekable; - load.priv = &pagesize; - ret = spl_load_imx_container(spl_image, &load, offset / pagesize); + ret = spl_load_imx_container(spl_image, &load, offset); } else { /* TODO */ puts("Can't support legacy image\n"); @@ -342,7 +334,7 @@ static int spl_romapi_load_image_stream(struct spl_image_info *spl_image, ss.pagesize = pagesize; memset(&load, 0, sizeof(load)); - load.bl_len = 1; + spl_set_bl_len(&load, 1); load.read = spl_romapi_read_stream; load.priv = &ss; @@ -366,7 +358,7 @@ static int spl_romapi_load_image_stream(struct spl_image_info *spl_image, printf("ROM download failure %d\n", imagesize); memset(&load, 0, sizeof(load)); - load.bl_len = 1; + spl_set_bl_len(&load, 1); load.read = spl_ram_load_read; if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) diff --git a/arch/arm/mach-ipq40xx/pinctrl-snapdragon.h b/arch/arm/mach-ipq40xx/pinctrl-snapdragon.h index 2341a713495..b4823a309fc 100644 --- a/arch/arm/mach-ipq40xx/pinctrl-snapdragon.h +++ b/arch/arm/mach-ipq40xx/pinctrl-snapdragon.h @@ -8,8 +8,6 @@ #ifndef _PINCTRL_SNAPDRAGON_H #define _PINCTRL_SNAPDRAGON_H -#include <common.h> - struct msm_pinctrl_data { int pin_count; int functions_count; diff --git a/arch/arm/mach-k3/am62ax/am62a_qos_data.c b/arch/arm/mach-k3/am62ax/am62a_qos_data.c index 01b76f7493c..38db4f2f5c8 100644 --- a/arch/arm/mach-k3/am62ax/am62a_qos_data.c +++ b/arch/arm/mach-k3/am62ax/am62a_qos_data.c @@ -5,7 +5,6 @@ * * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ */ -#include <common.h> #include <asm/arch/hardware.h> #include "common.h" diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c index c871e92330b..6085379f1db 100644 --- a/arch/arm/mach-k3/am642_init.c +++ b/arch/arm/mach-k3/am642_init.c @@ -7,7 +7,6 @@ * Dave Gerlach <d-gerlach@ti.com> */ -#include <common.h> #include <fdt_support.h> #include <spl.h> #include <asm/io.h> diff --git a/arch/arm/mach-k3/am654_init.c b/arch/arm/mach-k3/am654_init.c index 9353a475a49..4235296774c 100644 --- a/arch/arm/mach-k3/am654_init.c +++ b/arch/arm/mach-k3/am654_init.c @@ -6,7 +6,6 @@ * Lokesh Vutla <lokeshvutla@ti.com> */ -#include <common.h> #include <fdt_support.h> #include <init.h> #include <asm/global_data.h> diff --git a/arch/arm/mach-k3/arm64-mmu.c b/arch/arm/mach-k3/arm64-mmu.c index f8087d2421e..14e7c896f91 100644 --- a/arch/arm/mach-k3/arm64-mmu.c +++ b/arch/arm/mach-k3/arm64-mmu.c @@ -9,7 +9,6 @@ * */ -#include <common.h> #include <asm/system.h> #include <asm/armv8/mmu.h> diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c index d8974d6c388..4c7b03fe6e0 100644 --- a/arch/arm/mach-k3/common.c +++ b/arch/arm/mach-k3/common.c @@ -6,7 +6,6 @@ * Lokesh Vutla <lokeshvutla@ti.com> */ -#include <common.h> #include <cpu_func.h> #include <image.h> #include <init.h> diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c index 18814c39ec3..b4398c8e0b9 100644 --- a/arch/arm/mach-k3/j721e_init.c +++ b/arch/arm/mach-k3/j721e_init.c @@ -6,7 +6,6 @@ * Lokesh Vutla <lokeshvutla@ti.com> */ -#include <common.h> #include <init.h> #include <spl.h> #include <asm/io.h> diff --git a/arch/arm/mach-k3/j721s2_init.c b/arch/arm/mach-k3/j721s2_init.c index 7170a808c4b..39499be2715 100644 --- a/arch/arm/mach-k3/j721s2_init.c +++ b/arch/arm/mach-k3/j721s2_init.c @@ -6,7 +6,6 @@ * David Huang <d-huang@ti.com> */ -#include <common.h> #include <init.h> #include <spl.h> #include <asm/io.h> diff --git a/arch/arm/mach-k3/r5_mpu.c b/arch/arm/mach-k3/r5_mpu.c index 605f7931518..2de5d28aebf 100644 --- a/arch/arm/mach-k3/r5_mpu.c +++ b/arch/arm/mach-k3/r5_mpu.c @@ -6,7 +6,6 @@ * Lokesh Vutla <lokeshvutla@ti.com> */ -#include <common.h> #include <asm/io.h> #include <linux/kernel.h> #include "common.h" diff --git a/arch/arm/mach-k3/security.c b/arch/arm/mach-k3/security.c index ebc9704a33b..22697a263a8 100644 --- a/arch/arm/mach-k3/security.c +++ b/arch/arm/mach-k3/security.c @@ -7,7 +7,6 @@ */ #include <asm/io.h> -#include <common.h> #include <cpu_func.h> #include <dm.h> #include <hang.h> diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c index 73a17276e12..49a82c7edc7 100644 --- a/arch/arm/mach-k3/sysfw-loader.c +++ b/arch/arm/mach-k3/sysfw-loader.c @@ -6,7 +6,6 @@ * Andreas Dannenberg <dannenberg@ti.com> */ -#include <common.h> #include <dm.h> #include <image.h> #include <log.h> diff --git a/arch/arm/mach-keystone/include/mach/mux-k2g.h b/arch/arm/mach-keystone/include/mach/mux-k2g.h index 67d47f81721..dfb5ad43506 100644 --- a/arch/arm/mach-keystone/include/mach/mux-k2g.h +++ b/arch/arm/mach-keystone/include/mach/mux-k2g.h @@ -9,7 +9,6 @@ #ifndef __ASM_ARCH_MUX_K2G_H #define __ASM_ARCH_MUX_K2G_H -#include <common.h> #include <asm/io.h> #define K2G_PADCFG_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x1000) diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 6deffb81836..8e0de935385 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -589,15 +589,6 @@ int board_ahci_enable(void) return 0; } -#ifdef CONFIG_SCSI_AHCI_PLAT -void scsi_init(void) -{ - printf("MVEBU SATA INIT\n"); - board_ahci_enable(); - ahci_init((void __iomem *)MVEBU_SATA0_BASE); -} -#endif - #ifdef CONFIG_USB_XHCI_MVEBU #define USB3_MAX_WINDOWS 4 #define USB3_WIN_CTRL(w) (0x0 + ((w) * 8)) diff --git a/arch/arm/mach-mvebu/include/mach/efuse.h b/arch/arm/mach-mvebu/include/mach/efuse.h index b125c30beb8..fd8ebceb26c 100644 --- a/arch/arm/mach-mvebu/include/mach/efuse.h +++ b/arch/arm/mach-mvebu/include/mach/efuse.h @@ -6,8 +6,6 @@ #ifndef _MVEBU_EFUSE_H #define _MVEBU_EFUSE_H -#include <common.h> - struct efuse_val { union { struct { diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index bb01eab80e6..8c10c694dff 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -27,13 +27,6 @@ obj-y += vc.o obj-y += abb.o endif -ifneq ($(CONFIG_OMAP54XX),) -ifeq ($(CONFIG_DM_SCSI),) -obj-y += pipe3-phy.o -obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o -endif -endif - ifeq ($(CONFIG_$(SPL_TPL_)SYS_DCACHE_OFF),) obj-y += omap-cache.o endif diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c index a68b21aeacc..57917da25cf 100644 --- a/arch/arm/mach-omap2/boot-common.c +++ b/arch/arm/mach-omap2/boot-common.c @@ -309,13 +309,6 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) } #endif -#ifdef CONFIG_SCSI_AHCI_PLAT -void arch_preboot_os(void) -{ - ahci_reset((void __iomem *)DWC_AHSATA_BASE); -} -#endif - #ifdef CONFIG_TI_SECURE_DEVICE void board_fit_image_post_process(const void *fit, int node, void **p_image, size_t *p_size) diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c index e6bee48dfcb..b39132222ee 100644 --- a/arch/arm/mach-omap2/omap5/hw_data.c +++ b/arch/arm/mach-omap2/omap5/hw_data.c @@ -485,9 +485,6 @@ void enable_basic_clocks(void) (*prcm)->cm_l4per_gpio6_clkctrl, (*prcm)->cm_l4per_gpio7_clkctrl, (*prcm)->cm_l4per_gpio8_clkctrl, -#ifdef CONFIG_SCSI_AHCI_PLAT - (*prcm)->cm_l3init_ocp2scp3_clkctrl, -#endif 0 }; @@ -507,9 +504,6 @@ void enable_basic_clocks(void) #ifdef CONFIG_TI_QSPI (*prcm)->cm_l4per_qspi_clkctrl, #endif -#ifdef CONFIG_SCSI_AHCI_PLAT - (*prcm)->cm_l3init_sata_clkctrl, -#endif 0 }; @@ -542,12 +536,6 @@ void enable_basic_clocks(void) setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24)); #endif -#ifdef CONFIG_SCSI_AHCI_PLAT - /* Enable optional functional clock for SATA */ - setbits_le32((*prcm)->cm_l3init_sata_clkctrl, - SATA_CLKCTRL_OPTFCLKEN_MASK); -#endif - /* Enable SCRM OPT clocks for PER and CORE dpll */ setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, OPTFCLKEN_SCRM_PER_MASK); diff --git a/arch/arm/mach-omap2/pipe3-phy.c b/arch/arm/mach-omap2/pipe3-phy.c deleted file mode 100644 index 3dfb184c430..00000000000 --- a/arch/arm/mach-omap2/pipe3-phy.c +++ /dev/null @@ -1,231 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * TI PIPE3 PHY - * - * (C) Copyright 2013 - * Texas Instruments, <www.ti.com> - */ - -#include <common.h> -#include <sata.h> -#include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> -#include <asm/io.h> -#include <linux/bitops.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include "pipe3-phy.h" - -/* PLLCTRL Registers */ -#define PLL_STATUS 0x00000004 -#define PLL_GO 0x00000008 -#define PLL_CONFIGURATION1 0x0000000C -#define PLL_CONFIGURATION2 0x00000010 -#define PLL_CONFIGURATION3 0x00000014 -#define PLL_CONFIGURATION4 0x00000020 - -#define PLL_REGM_MASK 0x001FFE00 -#define PLL_REGM_SHIFT 9 -#define PLL_REGM_F_MASK 0x0003FFFF -#define PLL_REGM_F_SHIFT 0 -#define PLL_REGN_MASK 0x000001FE -#define PLL_REGN_SHIFT 1 -#define PLL_SELFREQDCO_MASK 0x0000000E -#define PLL_SELFREQDCO_SHIFT 1 -#define PLL_SD_MASK 0x0003FC00 -#define PLL_SD_SHIFT 10 -#define SET_PLL_GO 0x1 -#define PLL_TICOPWDN BIT(16) -#define PLL_LDOPWDN BIT(15) -#define PLL_LOCK 0x2 -#define PLL_IDLE 0x1 - -/* PHY POWER CONTROL Register */ -#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 -#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE - -#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000 -#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16 - -#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3 -#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0 - - -#define PLL_IDLE_TIME 100 /* in milliseconds */ -#define PLL_LOCK_TIME 100 /* in milliseconds */ - -static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset) -{ - return __raw_readl(addr + offset); -} - -static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset, - u32 data) -{ - __raw_writel(data, addr + offset); -} - -static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3 - *pipe3) -{ - u32 rate; - struct pipe3_dpll_map *dpll_map = pipe3->dpll_map; - - rate = get_sys_clk_freq(); - - for (; dpll_map->rate; dpll_map++) { - if (rate == dpll_map->rate) - return &dpll_map->params; - } - - printf("%s: No DPLL configuration for %u Hz SYS CLK\n", - __func__, rate); - return NULL; -} - - -static int omap_pipe3_wait_lock(struct omap_pipe3 *phy) -{ - u32 val; - int timeout = PLL_LOCK_TIME; - - do { - mdelay(1); - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); - if (val & PLL_LOCK) - break; - } while (--timeout); - - if (!(val & PLL_LOCK)) { - printf("%s: DPLL failed to lock\n", __func__); - return -EBUSY; - } - - return 0; -} - -static int omap_pipe3_dpll_program(struct omap_pipe3 *phy) -{ - u32 val; - struct pipe3_dpll_params *dpll_params; - - dpll_params = omap_pipe3_get_dpll_params(phy); - if (!dpll_params) { - printf("%s: Invalid DPLL parameters\n", __func__); - return -EINVAL; - } - - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); - val &= ~PLL_REGN_MASK; - val |= dpll_params->n << PLL_REGN_SHIFT; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); - - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val &= ~PLL_SELFREQDCO_MASK; - val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); - val &= ~PLL_REGM_MASK; - val |= dpll_params->m << PLL_REGM_SHIFT; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); - - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); - val &= ~PLL_REGM_F_MASK; - val |= dpll_params->mf << PLL_REGM_F_SHIFT; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); - - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); - val &= ~PLL_SD_MASK; - val |= dpll_params->sd << PLL_SD_SHIFT; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); - - omap_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); - - return omap_pipe3_wait_lock(phy); -} - -static void omap_control_phy_power(struct omap_pipe3 *phy, int on) -{ - u32 val, rate; - - val = readl(phy->power_reg); - - rate = get_sys_clk_freq(); - rate = rate/1000000; - - if (on) { - val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK); - val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON << - OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; - val |= rate << - OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; - } else { - val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; - val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF << - OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; - } - - writel(val, phy->power_reg); -} - -int phy_pipe3_power_on(struct omap_pipe3 *phy) -{ - int ret; - u32 val; - - /* Program the DPLL only if not locked */ - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); - if (!(val & PLL_LOCK)) { - ret = omap_pipe3_dpll_program(phy); - if (ret) - return ret; - } else { - /* else just bring it out of IDLE mode */ - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - if (val & PLL_IDLE) { - val &= ~PLL_IDLE; - omap_pipe3_writel(phy->pll_ctrl_base, - PLL_CONFIGURATION2, val); - ret = omap_pipe3_wait_lock(phy); - if (ret) - return ret; - } - } - - /* Power up the PHY */ - omap_control_phy_power(phy, 1); - - return 0; -} - -int phy_pipe3_power_off(struct omap_pipe3 *phy) -{ - u32 val; - int timeout = PLL_IDLE_TIME; - - /* Power down the PHY */ - omap_control_phy_power(phy, 0); - - /* Put DPLL in IDLE mode */ - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val |= PLL_IDLE; - omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - /* wait for LDO and Oscillator to power down */ - do { - mdelay(1); - val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); - if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN)) - break; - } while (--timeout); - - if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) { - printf("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n", - __func__, val); - return -EBUSY; - } - - return 0; -} diff --git a/arch/arm/mach-omap2/pipe3-phy.h b/arch/arm/mach-omap2/pipe3-phy.h deleted file mode 100644 index 182bdcd4c81..00000000000 --- a/arch/arm/mach-omap2/pipe3-phy.h +++ /dev/null @@ -1,35 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * TI PIPE3 PHY - * - * (C) Copyright 2013 - * Texas Instruments, <www.ti.com> - */ - -#ifndef __OMAP_PIPE3_PHY_H -#define __OMAP_PIPE3_PHY_H - -struct pipe3_dpll_params { - u16 m; - u8 n; - u8 freq:3; - u8 sd; - u32 mf; -}; - -struct pipe3_dpll_map { - unsigned long rate; - struct pipe3_dpll_params params; -}; - -struct omap_pipe3 { - void __iomem *pll_ctrl_base; - void __iomem *power_reg; - struct pipe3_dpll_map *dpll_map; -}; - - -int phy_pipe3_power_on(struct omap_pipe3 *phy); -int phy_pipe3_power_off(struct omap_pipe3 *pipe3); - -#endif /* __OMAP_PIPE3_PHY_H */ diff --git a/arch/arm/mach-omap2/sata.c b/arch/arm/mach-omap2/sata.c deleted file mode 100644 index 53c39ce1fb6..00000000000 --- a/arch/arm/mach-omap2/sata.c +++ /dev/null @@ -1,72 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * TI SATA platform driver - * - * (C) Copyright 2013 - * Texas Instruments, <www.ti.com> - */ - -#include <common.h> -#include <ahci.h> -#include <scsi.h> -#include <asm/arch/clock.h> -#include <asm/arch/sata.h> -#include <sata.h> -#include <asm/io.h> -#include <asm/omap_common.h> -#include "pipe3-phy.h" - -static struct pipe3_dpll_map dpll_map_sata[] = { - {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ - {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ - {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ - {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ - {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ - {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ - { }, /* Terminator */ -}; - -struct omap_pipe3 sata_phy = { - .pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE, - /* .power_reg is updated at runtime */ - .dpll_map = dpll_map_sata, -}; - -int init_sata(int dev) -{ - int ret; - u32 val; - - sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata; - - /* Power up the PHY */ - phy_pipe3_power_on(&sata_phy); - - /* Enable SATA module, No Idle, No Standby */ - val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO; - writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG); - - ret = ahci_init((void __iomem *)DWC_AHSATA_BASE); - - return ret; -} - -int reset_sata(int dev) -{ - return 0; -} - -/* On OMAP platforms SATA provides the SCSI subsystem */ -void scsi_init(void) -{ - init_sata(0); - scsi_scan(1); -} - -int scsi_bus_reset(struct udevice *dev) -{ - ahci_reset((void __iomem *)DWC_AHSATA_BASE); - ahci_init((void __iomem *)DWC_AHSATA_BASE); - - return 0; -} diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index db47baba6d1..5fc92d07fe6 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -76,6 +76,30 @@ config STM32MP15x STM32MP157, STM32MP153 or STM32MP151 STMicroelectronics MPU with core ARMv7 dual core A7 for STM32MP157/3, monocore for STM32MP151 + +config STM32MP25X + bool "Support STMicroelectronics STM32MP25x Soc" + select ARM64 + select CLK_STM32MP25 + select OF_BOARD + select PINCTRL_STM32 + select STM32_RCC + select STM32_RESET + select STM32_SERIAL + select SYS_ARCH_TIMER + select TFABOOT + imply CLK_SCMI + imply CMD_NVEDIT_INFO + imply DM_REGULATOR + imply DM_REGULATOR_SCMI + imply OPTEE + imply RESET_SCMI + imply SYSRESET_PSCI + imply TEE + imply VERSION_VARIABLE + help + Support of STMicroelectronics SOC STM32MP25x family + STMicroelectronics MPU with 2 * A53 core and 1 M33 core endchoice config NR_DRAM_BANKS @@ -128,6 +152,6 @@ config CMD_STM32KEY source "arch/arm/mach-stm32mp/Kconfig.13x" source "arch/arm/mach-stm32mp/Kconfig.15x" - +source "arch/arm/mach-stm32mp/Kconfig.25x" source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig" endif diff --git a/arch/arm/mach-stm32mp/Kconfig.25x b/arch/arm/mach-stm32mp/Kconfig.25x new file mode 100644 index 00000000000..2c0f691f8b5 --- /dev/null +++ b/arch/arm/mach-stm32mp/Kconfig.25x @@ -0,0 +1,43 @@ +if STM32MP25X + +choice + prompt "STM32MP25x board select" + optional + +config TARGET_ST_STM32MP25X + bool "STMicroelectronics STM32MP25x boards" + imply BOOTSTAGE + imply CMD_BOOTSTAGE + help + target the STMicroelectronics board with SOC STM32MP25x + managed by board/st/stm32mp2 + The difference between board are managed with devicetree + +endchoice + +config TEXT_BASE + default 0x84000000 + +config PRE_CON_BUF_ADDR + default 0x84800000 + +config PRE_CON_BUF_SZ + default 4096 + +config BOOTSTAGE_STASH_ADDR + default 0x87000000 + +if DEBUG_UART + +config DEBUG_UART_BOARD_INIT + default y + +# debug on USART2 by default +config DEBUG_UART_BASE + default 0x400e0000 + +endif + +source "board/st/stm32mp2/Kconfig" + +endif diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile index a19b2797c8b..00dc25bb275 100644 --- a/arch/arm/mach-stm32mp/Makefile +++ b/arch/arm/mach-stm32mp/Makefile @@ -3,24 +3,17 @@ # Copyright (C) 2018, STMicroelectronics - All Rights Reserved # -obj-y += cpu.o obj-y += dram_init.o obj-y += syscon.o obj-y += bsec.o -obj-$(CONFIG_STM32MP13x) += stm32mp13x.o -obj-$(CONFIG_STM32MP15x) += stm32mp15x.o +obj-$(CONFIG_STM32MP15x) += stm32mp1/ +obj-$(CONFIG_STM32MP13x) += stm32mp1/ +obj-$(CONFIG_STM32MP25X) += stm32mp2/ obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o -ifdef CONFIG_SPL_BUILD -obj-y += spl.o -obj-y += tzc400.o -else +ifndef CONFIG_SPL_BUILD obj-y += cmd_stm32prog/ obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o -obj-$(CONFIG_ARMV7_PSCI) += psci.o obj-$(CONFIG_TFABOOT) += boot_params.o endif - -obj-$(CONFIG_$(SPL_)STM32MP15_PWR) += pwr_regulator.o -obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c index 599e63a93dd..28a8280b280 100644 --- a/arch/arm/mach-stm32mp/bsec.c +++ b/arch/arm/mach-stm32mp/bsec.c @@ -110,7 +110,7 @@ * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: true if locked else false */ -static bool bsec_read_lock(u32 address, u32 otp) +static bool bsec_read_lock(void __iomem *address, u32 otp) { u32 bit; u32 bank; @@ -118,7 +118,7 @@ static bool bsec_read_lock(u32 address, u32 otp) bit = 1 << (otp & OTP_LOCK_MASK); bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32); - return !!(readl(address + bank) & bit); + return !!(readl((address + bank)) & bit); } /** @@ -127,7 +127,7 @@ static bool bsec_read_lock(u32 address, u32 otp) * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error, -EAGAIN or -ENOTSUPP */ -static u32 bsec_check_error(u32 base, u32 otp) +static u32 bsec_check_error(void __iomem *base, u32 otp) { u32 bit; u32 bank; @@ -149,7 +149,7 @@ static u32 bsec_check_error(u32 base, u32 otp) * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: true if locked else false */ -static bool bsec_read_SR_lock(u32 base, u32 otp) +static bool bsec_read_SR_lock(void __iomem *base, u32 otp) { return bsec_read_lock(base + BSEC_SRLOCK_OFF, otp); } @@ -160,7 +160,7 @@ static bool bsec_read_SR_lock(u32 base, u32 otp) * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: true if locked else false */ -static bool bsec_read_SP_lock(u32 base, u32 otp) +static bool bsec_read_SP_lock(void __iomem *base, u32 otp) { return bsec_read_lock(base + BSEC_SPLOCK_OFF, otp); } @@ -171,7 +171,7 @@ static bool bsec_read_SP_lock(u32 base, u32 otp) * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: true if locked else false */ -static bool bsec_read_SW_lock(u32 base, u32 otp) +static bool bsec_read_SW_lock(void __iomem *base, u32 otp) { return bsec_read_lock(base + BSEC_SWLOCK_OFF, otp); } @@ -182,7 +182,7 @@ static bool bsec_read_SW_lock(u32 base, u32 otp) * @power: true to power up , false to power down * Return: 0 if succeed */ -static int bsec_power_safmem(u32 base, bool power) +static int bsec_power_safmem(void __iomem *base, bool power) { u32 val; u32 mask; @@ -208,7 +208,7 @@ static int bsec_power_safmem(u32 base, bool power) * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error */ -static int bsec_shadow_register(struct udevice *dev, u32 base, u32 otp) +static int bsec_shadow_register(struct udevice *dev, void __iomem *base, u32 otp) { u32 val; int ret; @@ -253,7 +253,8 @@ static int bsec_shadow_register(struct udevice *dev, u32 base, u32 otp) * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error */ -static int bsec_read_shadow(struct udevice *dev, u32 base, u32 *val, u32 otp) +static int bsec_read_shadow(struct udevice *dev, void __iomem *base, u32 *val, + u32 otp) { *val = readl(base + BSEC_OTP_DATA_OFF + otp * sizeof(u32)); @@ -268,7 +269,7 @@ static int bsec_read_shadow(struct udevice *dev, u32 base, u32 *val, u32 otp) * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error */ -static int bsec_write_shadow(struct udevice *dev, u32 base, u32 val, u32 otp) +static int bsec_write_shadow(struct udevice *dev, void __iomem *base, u32 val, u32 otp) { /* check if programming of otp is locked */ if (bsec_read_SW_lock(base, otp)) @@ -288,7 +289,7 @@ static int bsec_write_shadow(struct udevice *dev, u32 base, u32 val, u32 otp) * after the function the otp data is not refreshed in shadow * Return: 0 if no error */ -static int bsec_program_otp(struct udevice *dev, long base, u32 val, u32 otp) +static int bsec_program_otp(struct udevice *dev, void __iomem *base, u32 val, u32 otp) { u32 ret; bool power_up = false; @@ -338,7 +339,7 @@ static int bsec_program_otp(struct udevice *dev, long base, u32 val, u32 otp) * @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error */ -static int bsec_permanent_lock_otp(struct udevice *dev, long base, uint32_t otp) +static int bsec_permanent_lock_otp(struct udevice *dev, void __iomem *base, uint32_t otp) { int ret; bool power_up = false; @@ -392,7 +393,7 @@ static int bsec_permanent_lock_otp(struct udevice *dev, long base, uint32_t otp) /* BSEC MISC driver *******************************************************/ struct stm32mp_bsec_plat { - u32 base; + void __iomem *base; }; struct stm32mp_bsec_priv { @@ -724,7 +725,7 @@ static int stm32mp_bsec_of_to_plat(struct udevice *dev) { struct stm32mp_bsec_plat *plat = dev_get_plat(dev); - plat->base = (u32)dev_read_addr_ptr(dev); + plat->base = dev_read_addr_ptr(dev); return 0; } diff --git a/arch/arm/mach-stm32mp/dram_init.c b/arch/arm/mach-stm32mp/dram_init.c index 7f37b0d2aa2..fb1208fc5d5 100644 --- a/arch/arm/mach-stm32mp/dram_init.c +++ b/arch/arm/mach-stm32mp/dram_init.c @@ -24,8 +24,11 @@ int dram_init(void) int ret; ret = uclass_get_device(UCLASS_RAM, 0, &dev); - if (ret) { - log_debug("RAM init failed: %d\n", ret); + /* in case there is no RAM driver, retrieve DDR size from DT */ + if (ret == -ENODEV) { + return fdtdec_setup_mem_size_base(); + } else if (ret) { + log_err("RAM init failed: %d\n", ret); return ret; } ret = ram_get_info(dev, &ram); @@ -33,7 +36,7 @@ int dram_init(void) log_debug("Cannot get RAM size: %d\n", ret); return ret; } - log_debug("RAM init base=%lx, size=%x\n", ram.base, ram.size); + log_debug("RAM init base=%p, size=%zx\n", (void *)ram.base, ram.size); gd->ram_size = ram.size; @@ -49,9 +52,15 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) if (!total_size) return gd->ram_top; + /* + * make sure U-Boot uses address space below 4GB boundaries even + * if the effective available memory is bigger + */ + gd->ram_top = clamp_val(gd->ram_top, 0, SZ_4G - 1); + /* found enough not-reserved memory to relocated U-Boot */ lmb_init(&lmb); - lmb_add(&lmb, gd->ram_base, get_effective_memsize()); + lmb_add(&lmb, gd->ram_base, gd->ram_top - gd->ram_base); boot_fdt_add_mem_rsv_regions(&lmb, (void *)gd->fdt_blob); /* add 8M for reserved memory for display, fdt, gd,... */ size = ALIGN(SZ_8M + CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE), diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index ac0deced67e..46d469881b3 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -6,14 +6,72 @@ #ifndef _MACH_STM32_H_ #define _MACH_STM32_H_ +#include <linux/sizes.h> #ifndef __ASSEMBLY__ #include <linux/bitops.h> + +enum boot_device { + BOOT_FLASH_SD = 0x10, + BOOT_FLASH_SD_1 = 0x11, + BOOT_FLASH_SD_2 = 0x12, + BOOT_FLASH_SD_3 = 0x13, + + BOOT_FLASH_EMMC = 0x20, + BOOT_FLASH_EMMC_1 = 0x21, + BOOT_FLASH_EMMC_2 = 0x22, + BOOT_FLASH_EMMC_3 = 0x23, + + BOOT_FLASH_NAND = 0x30, + BOOT_FLASH_NAND_FMC = 0x31, + + BOOT_FLASH_NOR = 0x40, + BOOT_FLASH_NOR_QSPI = 0x41, + + BOOT_SERIAL_UART = 0x50, + BOOT_SERIAL_UART_1 = 0x51, + BOOT_SERIAL_UART_2 = 0x52, + BOOT_SERIAL_UART_3 = 0x53, + BOOT_SERIAL_UART_4 = 0x54, + BOOT_SERIAL_UART_5 = 0x55, + BOOT_SERIAL_UART_6 = 0x56, + BOOT_SERIAL_UART_7 = 0x57, + BOOT_SERIAL_UART_8 = 0x58, + + BOOT_SERIAL_USB = 0x60, + BOOT_SERIAL_USB_OTG = 0x62, + + BOOT_FLASH_SPINAND = 0x70, + BOOT_FLASH_SPINAND_1 = 0x71, +}; + +#define TAMP_BOOT_MODE_MASK GENMASK(15, 8) +#define TAMP_BOOT_MODE_SHIFT 8 +#define TAMP_BOOT_AUTH_MASK GENMASK(23, 16) +#define TAMP_BOOT_AUTH_SHIFT 16 +#define TAMP_BOOT_DEVICE_MASK GENMASK(7, 4) +#define TAMP_BOOT_INSTANCE_MASK GENMASK(3, 0) +#define TAMP_BOOT_AUTH_ST_MASK GENMASK(7, 4) +#define TAMP_BOOT_PARTITION_MASK GENMASK(3, 0) +#define TAMP_BOOT_FORCED_MASK GENMASK(7, 0) + +enum forced_boot_mode { + BOOT_NORMAL = 0x00, + BOOT_FASTBOOT = 0x01, + BOOT_RECOVERY = 0x02, + BOOT_STM32PROG = 0x03, + BOOT_UMS_MMC0 = 0x10, + BOOT_UMS_MMC1 = 0x11, + BOOT_UMS_MMC2 = 0x12, +}; + #endif /* * Peripheral memory map * only address used before device tree parsing */ + +#if defined(CONFIG_STM32MP15x) || defined(CONFIG_STM32MP13x) #define STM32_RCC_BASE 0x50000000 #define STM32_PWR_BASE 0x50001000 #define STM32_SYSCFG_BASE 0x50020000 @@ -58,12 +116,6 @@ #define STM32_DDR_SIZE SZ_1G #ifndef __ASSEMBLY__ -/* enumerated used to identify the SYSCON driver instance */ -enum { - STM32MP_SYSCON_UNKNOWN, - STM32MP_SYSCON_SYSCFG, -}; - /* * enumerated for boot interface from Bootrom, used in TAMP_BOOT_CONTEXT * - boot device = bit 8:4 @@ -74,40 +126,6 @@ enum { #define BOOT_INSTANCE_MASK 0x0F #define BOOT_INSTANCE_SHIFT 0 -enum boot_device { - BOOT_FLASH_SD = 0x10, - BOOT_FLASH_SD_1 = 0x11, - BOOT_FLASH_SD_2 = 0x12, - BOOT_FLASH_SD_3 = 0x13, - - BOOT_FLASH_EMMC = 0x20, - BOOT_FLASH_EMMC_1 = 0x21, - BOOT_FLASH_EMMC_2 = 0x22, - BOOT_FLASH_EMMC_3 = 0x23, - - BOOT_FLASH_NAND = 0x30, - BOOT_FLASH_NAND_FMC = 0x31, - - BOOT_FLASH_NOR = 0x40, - BOOT_FLASH_NOR_QSPI = 0x41, - - BOOT_SERIAL_UART = 0x50, - BOOT_SERIAL_UART_1 = 0x51, - BOOT_SERIAL_UART_2 = 0x52, - BOOT_SERIAL_UART_3 = 0x53, - BOOT_SERIAL_UART_4 = 0x54, - BOOT_SERIAL_UART_5 = 0x55, - BOOT_SERIAL_UART_6 = 0x56, - BOOT_SERIAL_UART_7 = 0x57, - BOOT_SERIAL_UART_8 = 0x58, - - BOOT_SERIAL_USB = 0x60, - BOOT_SERIAL_USB_OTG = 0x62, - - BOOT_FLASH_SPINAND = 0x70, - BOOT_FLASH_SPINAND_1 = 0x71, -}; - /* TAMP registers */ #define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * x) @@ -123,7 +141,6 @@ enum boot_device { #define TAMP_FWU_BOOT_IDX_MASK GENMASK(3, 0) #define TAMP_FWU_BOOT_IDX_OFFSET 0 - #define TAMP_COPRO_STATE_OFF 0 #define TAMP_COPRO_STATE_INIT 1 #define TAMP_COPRO_STATE_CRUN 2 @@ -137,25 +154,23 @@ enum boot_device { #define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(30) #endif -#define TAMP_BOOT_MODE_MASK GENMASK(15, 8) -#define TAMP_BOOT_MODE_SHIFT 8 -#define TAMP_BOOT_AUTH_MASK GENMASK(23, 16) -#define TAMP_BOOT_AUTH_SHIFT 16 -#define TAMP_BOOT_DEVICE_MASK GENMASK(7, 4) -#define TAMP_BOOT_INSTANCE_MASK GENMASK(3, 0) -#define TAMP_BOOT_AUTH_ST_MASK GENMASK(7, 4) -#define TAMP_BOOT_PARTITION_MASK GENMASK(3, 0) -#define TAMP_BOOT_FORCED_MASK GENMASK(7, 0) +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_STM32MP15X || CONFIG_STM32MP13X */ -enum forced_boot_mode { - BOOT_NORMAL = 0x00, - BOOT_FASTBOOT = 0x01, - BOOT_RECOVERY = 0x02, - BOOT_STM32PROG = 0x03, - BOOT_UMS_MMC0 = 0x10, - BOOT_UMS_MMC1 = 0x11, - BOOT_UMS_MMC2 = 0x12, -}; +#if CONFIG_STM32MP25X +#define STM32_RCC_BASE 0x44200000 +#define STM32_TAMP_BASE 0x46010000 + +#define STM32_DDR_BASE 0x80000000 + +#define STM32_DDR_SIZE SZ_4G + +/* TAMP registers x = 0 to 127 : hardcoded description, waiting NVMEM node in DT */ +#define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * (x)) + +/* TAMP registers zone 3 RIF 1 (RW) at 96*/ +#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(96) +#endif /* STM32MP25X */ /* offset used for BSEC driver: misc_read and misc_write */ #define STM32_BSEC_SHADOW_OFFSET 0x0 @@ -179,6 +194,20 @@ enum forced_boot_mode { #define BSEC_OTP_MAC 57 #define BSEC_OTP_BOARD 60 #endif +#ifdef CONFIG_STM32MP25X +#define BSEC_OTP_SERIAL 5 +#define BSEC_OTP_RPN 9 +#define BSEC_OTP_PKG 246 +#endif + +#ifndef __ASSEMBLY__ +#include <asm/types.h> + +/* enumerated used to identify the SYSCON driver instance */ +enum { + STM32MP_SYSCON_UNKNOWN, + STM32MP_SYSCON_SYSCFG, +}; +#endif /* __ASSEMBLY__*/ -#endif /* __ASSEMBLY__ */ #endif /* _MACH_STM32_H_ */ diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h index 52aca1e23e1..83388fdb737 100644 --- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h +++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h @@ -30,11 +30,30 @@ #define CPU_STM32MP131Fxx 0x05010EC8 #define CPU_STM32MP131Dxx 0x05010EC9 +/* ID for STM32MP25x = Device Part Number (RPN) (bit31:0) */ +#define CPU_STM32MP257Cxx 0x00002000 +#define CPU_STM32MP255Cxx 0x00082000 +#define CPU_STM32MP253Cxx 0x000B2004 +#define CPU_STM32MP251Cxx 0x000B3065 +#define CPU_STM32MP257Axx 0x40002E00 +#define CPU_STM32MP255Axx 0x40082E00 +#define CPU_STM32MP253Axx 0x400B2E04 +#define CPU_STM32MP251Axx 0x400B3E65 +#define CPU_STM32MP257Fxx 0x80002000 +#define CPU_STM32MP255Fxx 0x80082000 +#define CPU_STM32MP253Fxx 0x800B2004 +#define CPU_STM32MP251Fxx 0x800B3065 +#define CPU_STM32MP257Dxx 0xC0002E00 +#define CPU_STM32MP255Dxx 0xC0082E00 +#define CPU_STM32MP253Dxx 0xC00B2E04 +#define CPU_STM32MP251Dxx 0xC00B3E65 + /* return CPU_STMP32MP...Xxx constants */ u32 get_cpu_type(void); #define CPU_DEV_STM32MP15 0x500 #define CPU_DEV_STM32MP13 0x501 +#define CPU_DEV_STM32MP25 0x505 /* return CPU_DEV constants */ u32 get_cpu_dev(void); @@ -59,6 +78,13 @@ u32 get_cpu_package(void); #define STM32MP15_PKG_AD_TFBGA257 1 #define STM32MP15_PKG_UNKNOWN 0 +/* package used for STM32MP25x */ +#define STM32MP25_PKG_CUSTOM 0 +#define STM32MP25_PKG_AL_TBGA361 3 +#define STM32MP25_PKG_AK_TBGA424 4 +#define STM32MP25_PKG_AI_TBGA436 5 +#define STM32MP25_PKG_UNKNOWN 7 + /* Get SOC name */ #define SOC_NAME_SIZE 20 void get_soc_name(char name[SOC_NAME_SIZE]); diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile b/arch/arm/mach-stm32mp/stm32mp1/Makefile new file mode 100644 index 00000000000..94c7724127e --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2018, STMicroelectronics - All Rights Reserved +# + +obj-y += cpu.o + +obj-$(CONFIG_STM32MP13x) += stm32mp13x.o +obj-$(CONFIG_STM32MP15x) += stm32mp15x.o + +obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-y += tzc400.o +else +obj-$(CONFIG_ARMV7_PSCI) += psci.o +endif + +obj-$(CONFIG_$(SPL_)STM32MP15_PWR) += pwr_regulator.o +obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/stm32mp1/cpu.c index 55574fd4beb..55574fd4beb 100644 --- a/arch/arm/mach-stm32mp/cpu.c +++ b/arch/arm/mach-stm32mp/stm32mp1/cpu.c diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/stm32mp1/fdt.c index de5c5a55ea0..de5c5a55ea0 100644 --- a/arch/arm/mach-stm32mp/fdt.c +++ b/arch/arm/mach-stm32mp/stm32mp1/fdt.c diff --git a/arch/arm/mach-stm32mp/psci.c b/arch/arm/mach-stm32mp/stm32mp1/psci.c index 8cdeb0ab3f2..8cdeb0ab3f2 100644 --- a/arch/arm/mach-stm32mp/psci.c +++ b/arch/arm/mach-stm32mp/stm32mp1/psci.c diff --git a/arch/arm/mach-stm32mp/pwr_regulator.c b/arch/arm/mach-stm32mp/stm32mp1/pwr_regulator.c index 846637ab162..846637ab162 100644 --- a/arch/arm/mach-stm32mp/pwr_regulator.c +++ b/arch/arm/mach-stm32mp/stm32mp1/pwr_regulator.c diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/stm32mp1/spl.c index 6c79259b2c8..6c79259b2c8 100644 --- a/arch/arm/mach-stm32mp/spl.c +++ b/arch/arm/mach-stm32mp/stm32mp1/spl.c diff --git a/arch/arm/mach-stm32mp/stm32mp13x.c b/arch/arm/mach-stm32mp/stm32mp1/stm32mp13x.c index 845d973ad1b..845d973ad1b 100644 --- a/arch/arm/mach-stm32mp/stm32mp13x.c +++ b/arch/arm/mach-stm32mp/stm32mp1/stm32mp13x.c diff --git a/arch/arm/mach-stm32mp/stm32mp15x.c b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c index afc56b02eea..afc56b02eea 100644 --- a/arch/arm/mach-stm32mp/stm32mp15x.c +++ b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c diff --git a/arch/arm/mach-stm32mp/tzc400.c b/arch/arm/mach-stm32mp/stm32mp1/tzc400.c index cdc4a40edaf..cdc4a40edaf 100644 --- a/arch/arm/mach-stm32mp/tzc400.c +++ b/arch/arm/mach-stm32mp/stm32mp1/tzc400.c diff --git a/arch/arm/mach-stm32mp/stm32mp2/Makefile b/arch/arm/mach-stm32mp/stm32mp2/Makefile new file mode 100644 index 00000000000..b579ce5a800 --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp2/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +# +# Copyright (C) 2023, STMicroelectronics - All Rights Reserved +# + +obj-y += cpu.o +obj-y += arm64-mmu.o +obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o +obj-$(CONFIG_STM32MP25X) += stm32mp25x.o diff --git a/arch/arm/mach-stm32mp/stm32mp2/arm64-mmu.c b/arch/arm/mach-stm32mp/stm32mp2/arm64-mmu.c new file mode 100644 index 00000000000..36c631ef0c2 --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp2/arm64-mmu.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + */ + +#include <asm/system.h> +#include <asm/armv8/mmu.h> +#include <mach/stm32.h> + +#define MP2_MEM_MAP_MAX 10 + +#if (CONFIG_TEXT_BASE < STM32_DDR_BASE) || \ + (CONFIG_TEXT_BASE > (STM32_DDR_BASE + STM32_DDR_SIZE)) +#error "invalid CONFIG_TEXT_BASE value" +#endif + +struct mm_region stm32mp2_mem_map[MP2_MEM_MAP_MAX] = { + { + /* PCIe */ + .virt = 0x10000000UL, + .phys = 0x10000000UL, + .size = 0x10000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* LPSRAMs, VDERAM, RETRAM, SRAMs, SYSRAM: alias1 */ + .virt = 0x20000000UL, + .phys = 0x20000000UL, + .size = 0x00200000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* Peripherals: alias1 */ + .virt = 0x40000000UL, + .phys = 0x40000000UL, + .size = 0x10000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* OSPI and FMC: memory-map area */ + .virt = 0x60000000UL, + .phys = 0x60000000UL, + .size = 0x20000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* + * DDR = STM32_DDR_BASE / STM32_DDR_SIZE + * the beginning of DDR (before CONFIG_TEXT_BASE) is not + * mapped, protected by RIF and reserved for other firmware + * (OP-TEE / TF-M / Cube M33) + */ + .virt = CONFIG_TEXT_BASE, + .phys = CONFIG_TEXT_BASE, + .size = STM32_DDR_SIZE - (CONFIG_TEXT_BASE - STM32_DDR_BASE), + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = stm32mp2_mem_map; diff --git a/arch/arm/mach-stm32mp/stm32mp2/cpu.c b/arch/arm/mach-stm32mp/stm32mp2/cpu.c new file mode 100644 index 00000000000..f43d1aaf72c --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp2/cpu.c @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + */ + +#define LOG_CATEGORY LOGC_ARCH + +#include <clk.h> +#include <cpu_func.h> +#include <debug_uart.h> +#include <env_internal.h> +#include <init.h> +#include <misc.h> +#include <wdt.h> +#include <asm/io.h> +#include <asm/arch/stm32.h> +#include <asm/arch/sys_proto.h> +#include <asm/system.h> +#include <dm/device.h> +#include <dm/lists.h> +#include <dm/uclass.h> + +/* + * early TLB into the .data section so that it not get cleared + * with 16kB alignment + */ +#define EARLY_TLB_SIZE 0xA000 +u8 early_tlb[EARLY_TLB_SIZE] __section(".data") __aligned(0x4000); + +/* + * initialize the MMU and activate cache in U-Boot pre-reloc stage + * MMU/TLB is updated in enable_caches() for U-Boot after relocation + */ +static void early_enable_caches(void) +{ + if (CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) + return; + + if (!(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))) { + gd->arch.tlb_size = EARLY_TLB_SIZE; + gd->arch.tlb_addr = (unsigned long)&early_tlb; + } + /* enable MMU (default configuration) */ + dcache_enable(); +} + +/* + * Early system init + */ +int arch_cpu_init(void) +{ + icache_enable(); + early_enable_caches(); + + return 0; +} + +void enable_caches(void) +{ + /* deactivate the data cache, early enabled in arch_cpu_init() */ + dcache_disable(); + /* + * Force the call of setup_all_pgtables() in mmu_setup() by clearing tlb_fillptr + * to update the TLB location udpated in board_f.c::reserve_mmu + */ + gd->arch.tlb_fillptr = 0; + dcache_enable(); +} + +/* used when CONFIG_DISPLAY_CPUINFO is activated */ +int print_cpuinfo(void) +{ + char name[SOC_NAME_SIZE]; + + get_soc_name(name); + printf("CPU: %s\n", name); + + return 0; +} + +int arch_misc_init(void) +{ + return 0; +} + +/* + * Force data-section, as .bss will not be valid + * when save_boot_params is invoked. + */ +static uintptr_t nt_fw_dtb __section(".data"); + +uintptr_t get_stm32mp_bl2_dtb(void) +{ + return nt_fw_dtb; +} + +/* + * Save the FDT address provided by TF-A in r2 at boot time + * This function is called from start.S + */ +void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, + unsigned long r3) +{ + nt_fw_dtb = r2; + + save_boot_params_ret(); +} diff --git a/arch/arm/mach-stm32mp/stm32mp2/fdt.c b/arch/arm/mach-stm32mp/stm32mp2/fdt.c new file mode 100644 index 00000000000..31b127b465a --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp2/fdt.c @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + */ + +#include <asm/u-boot.h> + +/* + * This function is called right before the kernel is booted. "blob" is the + * device tree that will be passed to the kernel. + */ +int ft_system_setup(void *blob, struct bd_info *bd) +{ + return 0; +} + diff --git a/arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c b/arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c new file mode 100644 index 00000000000..4b2f70af9cc --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + */ + +#define LOG_CATEGORY LOGC_ARCH + +#include <log.h> +#include <syscon.h> +#include <asm/io.h> +#include <asm/arch/stm32.h> +#include <asm/arch/sys_proto.h> + +/* SYSCFG register */ +#define SYSCFG_DEVICEID_OFFSET 0x6400 +#define SYSCFG_DEVICEID_DEV_ID_MASK GENMASK(11, 0) +#define SYSCFG_DEVICEID_DEV_ID_SHIFT 0 +#define SYSCFG_DEVICEID_REV_ID_MASK GENMASK(31, 16) +#define SYSCFG_DEVICEID_REV_ID_SHIFT 16 + +/* Device Part Number (RPN) = OTP9 */ +#define RPN_SHIFT 0 +#define RPN_MASK GENMASK(31, 0) + +/* Package = bit 0:2 of OTP122 => STM32MP25_PKG defines + * - 000: Custom package + * - 011: TFBGA361 => AL = 10x10, 361 balls pith 0.5mm + * - 100: TFBGA424 => AK = 14x14, 424 balls pith 0.5mm + * - 101: TFBGA436 => AI = 18x18, 436 balls pith 0.5mm + * - others: Reserved + */ +#define PKG_SHIFT 0 +#define PKG_MASK GENMASK(2, 0) + +static u32 read_deviceid(void) +{ + void *syscfg = syscon_get_first_range(STM32MP_SYSCON_SYSCFG); + + return readl(syscfg + SYSCFG_DEVICEID_OFFSET); +} + +u32 get_cpu_dev(void) +{ + return (read_deviceid() & SYSCFG_DEVICEID_DEV_ID_MASK) >> SYSCFG_DEVICEID_DEV_ID_SHIFT; +} + +u32 get_cpu_rev(void) +{ + return (read_deviceid() & SYSCFG_DEVICEID_REV_ID_MASK) >> SYSCFG_DEVICEID_REV_ID_SHIFT; +} + +/* Get Device Part Number (RPN) from OTP */ +u32 get_cpu_type(void) +{ + return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK); +} + +/* Get Package options from OTP */ +u32 get_cpu_package(void) +{ + return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK); +} + +int get_eth_nb(void) +{ + int nb_eth; + + switch (get_cpu_type()) { + case CPU_STM32MP257Fxx: + fallthrough; + case CPU_STM32MP257Dxx: + fallthrough; + case CPU_STM32MP257Cxx: + fallthrough; + case CPU_STM32MP257Axx: + nb_eth = 5; /* dual ETH with TSN support */ + break; + case CPU_STM32MP253Fxx: + fallthrough; + case CPU_STM32MP253Dxx: + fallthrough; + case CPU_STM32MP253Cxx: + fallthrough; + case CPU_STM32MP253Axx: + nb_eth = 2; /* dual ETH */ + break; + case CPU_STM32MP251Fxx: + fallthrough; + case CPU_STM32MP251Dxx: + fallthrough; + case CPU_STM32MP251Cxx: + fallthrough; + case CPU_STM32MP251Axx: + nb_eth = 1; /* single ETH */ + break; + default: + nb_eth = 0; + break; + } + + return nb_eth; +} + +void get_soc_name(char name[SOC_NAME_SIZE]) +{ + char *cpu_s, *cpu_r, *package; + + cpu_s = "????"; + cpu_r = "?"; + package = "??"; + if (get_cpu_dev() == CPU_DEV_STM32MP25) { + switch (get_cpu_type()) { + case CPU_STM32MP257Fxx: + cpu_s = "257F"; + break; + case CPU_STM32MP257Dxx: + cpu_s = "257D"; + break; + case CPU_STM32MP257Cxx: + cpu_s = "257C"; + break; + case CPU_STM32MP257Axx: + cpu_s = "257A"; + break; + case CPU_STM32MP255Fxx: + cpu_s = "255F"; + break; + case CPU_STM32MP255Dxx: + cpu_s = "255D"; + break; + case CPU_STM32MP255Cxx: + cpu_s = "255C"; + break; + case CPU_STM32MP255Axx: + cpu_s = "255A"; + break; + case CPU_STM32MP253Fxx: + cpu_s = "253F"; + break; + case CPU_STM32MP253Dxx: + cpu_s = "253D"; + break; + case CPU_STM32MP253Cxx: + cpu_s = "253C"; + break; + case CPU_STM32MP253Axx: + cpu_s = "253A"; + break; + case CPU_STM32MP251Fxx: + cpu_s = "251F"; + break; + case CPU_STM32MP251Dxx: + cpu_s = "251D"; + break; + case CPU_STM32MP251Cxx: + cpu_s = "251C"; + break; + case CPU_STM32MP251Axx: + cpu_s = "251A"; + break; + default: + cpu_s = "25??"; + break; + } + /* REVISION */ + switch (get_cpu_rev()) { + case CPU_REV1: + cpu_r = "A"; + break; + default: + break; + } + /* PACKAGE */ + switch (get_cpu_package()) { + case STM32MP25_PKG_CUSTOM: + package = "XX"; + break; + case STM32MP25_PKG_AL_TBGA361: + package = "AL"; + break; + case STM32MP25_PKG_AK_TBGA424: + package = "AK"; + break; + case STM32MP25_PKG_AI_TBGA436: + package = "AI"; + break; + default: + break; + } + } + + snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s", cpu_s, package, cpu_r); +} diff --git a/arch/arm/mach-stm32mp/syscon.c b/arch/arm/mach-stm32mp/syscon.c index a0e8e1dfdc5..a2e351d74a7 100644 --- a/arch/arm/mach-stm32mp/syscon.c +++ b/arch/arm/mach-stm32mp/syscon.c @@ -10,8 +10,8 @@ #include <asm/arch/stm32.h> static const struct udevice_id stm32mp_syscon_ids[] = { - { .compatible = "st,stm32mp157-syscfg", - .data = STM32MP_SYSCON_SYSCFG }, + { .compatible = "st,stm32mp157-syscfg", .data = STM32MP_SYSCON_SYSCFG }, + { .compatible = "st,stm32mp25-syscfg", .data = STM32MP_SYSCON_SYSCFG}, { } }; diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c index c2410dd7bb1..267cb0b1aba 100644 --- a/arch/arm/mach-sunxi/spl_spi_sunxi.c +++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c @@ -354,10 +354,7 @@ static int spl_spi_load_image(struct spl_image_info *spl_image, struct spl_load_info load; debug("Found FIT image\n"); - load.dev = NULL; - load.priv = NULL; - load.filename = NULL; - load.bl_len = 1; + spl_set_bl_len(&load, 1); load.read = spi_load_read; ret = spl_load_simple_fit(spl_image, &load, load_offset, header); diff --git a/arch/arm/mach-tegra/xusb-padctl-common.h b/arch/arm/mach-tegra/xusb-padctl-common.h index e3fd613f2be..a576e6f6165 100644 --- a/arch/arm/mach-tegra/xusb-padctl-common.h +++ b/arch/arm/mach-tegra/xusb-padctl-common.h @@ -6,7 +6,6 @@ #ifndef _TEGRA_XUSB_PADCTL_COMMON_H_ #define _TEGRA_XUSB_PADCTL_COMMON_H_ -#include <common.h> #include <fdtdec.h> #include <dm/ofnode.h> diff --git a/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h b/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h index 434a7fa20e4..783d7c45c7b 100644 --- a/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h +++ b/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h @@ -4,7 +4,6 @@ #define _PSU_INIT_GPL_H_ #include <asm/io.h> -#include <common.h> int mask_pollonvalue(unsigned long add, u32 mask, u32 value); diff --git a/arch/m68k/include/asm/fsl_mcdmafec.h b/arch/m68k/include/asm/fsl_mcdmafec.h deleted file mode 100644 index de6c548fafd..00000000000 --- a/arch/m68k/include/asm/fsl_mcdmafec.h +++ /dev/null @@ -1,151 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * fsl_mcdmafec.h -- Multi-channel DMA Fast Ethernet Controller definitions - * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -#ifndef fsl_mcdmafec_h -#define fsl_mcdmafec_h - -/* Re-use of the definitions */ -#include <asm/fec.h> - -typedef struct fecdma { - u32 rsvd0; /* 0x000 */ - u32 eir; /* 0x004 */ - u32 eimr; /* 0x008 */ - u32 rsvd1[6]; /* 0x00C - 0x023 */ - u32 ecr; /* 0x024 */ - u32 rsvd2[6]; /* 0x028 - 0x03F */ - u32 mmfr; /* 0x040 */ - u32 mscr; /* 0x044 */ - u32 rsvd3[7]; /* 0x048 - 0x063 */ - u32 mibc; /* 0x064 */ - u32 rsvd4[7]; /* 0x068 - 0x083 */ - u32 rcr; /* 0x084 */ - u32 rhr; /* 0x088 */ - u32 rsvd5[14]; /* 0x08C - 0x0C3 */ - u32 tcr; /* 0x0C4 */ - u32 rsvd6[7]; /* 0x0C8 - 0x0E3 */ - u32 palr; /* 0x0E4 */ - u32 paur; /* 0x0E8 */ - u32 opd; /* 0x0EC */ - u32 rsvd7[10]; /* 0x0F0 - 0x117 */ - u32 iaur; /* 0x118 */ - u32 ialr; /* 0x11C */ - u32 gaur; /* 0x120 */ - u32 galr; /* 0x124 */ - u32 rsvd8[7]; /* 0x128 - 0x143 */ - u32 tfwr; /* 0x144 */ - u32 rsvd9[14]; /* 0x148 - 0x17F */ - u32 fmc; /* 0x180 */ - u32 rfdr; /* 0x184 */ - u32 rfsr; /* 0x188 */ - u32 rfcr; /* 0x18C */ - u32 rlrfp; /* 0x190 */ - u32 rlwfp; /* 0x194 */ - u32 rfar; /* 0x198 */ - u32 rfrp; /* 0x19C */ - u32 rfwp; /* 0x1A0 */ - u32 tfdr; /* 0x1A4 */ - u32 tfsr; /* 0x1A8 */ - u32 tfcr; /* 0x1AC */ - u32 tlrfp; /* 0x1B0 */ - u32 tlwfp; /* 0x1B4 */ - u32 tfar; /* 0x1B8 */ - u32 tfrp; /* 0x1BC */ - u32 tfwp; /* 0x1C0 */ - u32 frst; /* 0x1C4 */ - u32 ctcwr; /* 0x1C8 */ -} fecdma_t; - -struct fec_info_dma { - int index; - u32 iobase; - u32 pinmux; - u32 miibase; - int phy_addr; - int dup_spd; - char *phy_name; - int phyname_init; - cbd_t *rxbd; /* Rx BD */ - cbd_t *txbd; /* Tx BD */ - uint rx_idx; - uint tx_idx; - char *txbuf; - int initialized; - struct fec_info_dma *next; - u16 rx_task; /* DMA receive Task Number */ - u16 tx_task; /* DMA Transmit Task Number */ - u16 rx_pri; /* DMA Receive Priority */ - u16 tx_pri; /* DMA Transmit Priority */ - u16 rx_init; /* DMA Receive Initiator */ - u16 tx_init; /* DMA Transmit Initiator */ - u16 used_tbd_idx; /* next transmit BD to clean */ - u16 clean_tbd_num; /* the number of available transmit BDs */ - int to_loop; - struct mii_dev *bus; -}; - -/* Bit definitions and macros for IEVENT */ -#define FEC_EIR_TXERR (0x00040000) -#define FEC_EIR_RXERR (0x00020000) -#undef FEC_EIR_CLEAR_ALL -#define FEC_EIR_CLEAR_ALL (0xFFFE0000) - -/* Bit definitions and macros for R_HASH */ -#define FEC_RHASH_FCE_DC (0x80000000) -#define FEC_RHASH_MULTCAST (0x40000000) -#define FEC_RHASH_HASH(x) (((x)&0x0000003F)<<24) - -/* Bit definitions and macros for FEC_TFWR */ -#undef FEC_TFWR_X_WMRK -#undef FEC_TFWR_X_WMRK_64 -#undef FEC_TFWR_X_WMRK_128 -#undef FEC_TFWR_X_WMRK_192 - -#define FEC_TFWR_X_WMRK(x) ((x)&0x0F) -#define FEC_TFWR_X_WMRK_64 (0x00) -#define FEC_TFWR_X_WMRK_128 (0x01) -#define FEC_TFWR_X_WMRK_192 (0x02) -#define FEC_TFWR_X_WMRK_256 (0x03) -#define FEC_TFWR_X_WMRK_320 (0x04) -#define FEC_TFWR_X_WMRK_384 (0x05) -#define FEC_TFWR_X_WMRK_448 (0x06) -#define FEC_TFWR_X_WMRK_512 (0x07) -#define FEC_TFWR_X_WMRK_576 (0x08) -#define FEC_TFWR_X_WMRK_640 (0x09) -#define FEC_TFWR_X_WMRK_704 (0x0A) -#define FEC_TFWR_X_WMRK_768 (0x0B) -#define FEC_TFWR_X_WMRK_832 (0x0C) -#define FEC_TFWR_X_WMRK_896 (0x0D) -#define FEC_TFWR_X_WMRK_960 (0x0E) -#define FEC_TFWR_X_WMRK_1024 (0x0F) - -/* FIFO definitions */ -/* Bit definitions and macros for FSTAT */ -#define FIFO_STAT_IP (0x80000000) -#define FIFO_STAT_FRAME(x) (((x)&0x0000000F)<<24) -#define FIFO_STAT_FAE (0x00800000) -#define FIFO_STAT_RXW (0x00400000) -#define FIFO_STAT_UF (0x00200000) -#define FIFO_STAT_OF (0x00100000) -#define FIFO_STAT_FR (0x00080000) -#define FIFO_STAT_FULL (0x00040000) -#define FIFO_STAT_ALARM (0x00020000) -#define FIFO_STAT_EMPTY (0x00010000) - -/* Bit definitions and macros for FCTRL */ -#define FIFO_CTRL_WCTL (0x40000000) -#define FIFO_CTRL_WFR (0x20000000) -#define FIFO_CTRL_FRAME (0x08000000) -#define FIFO_CTRL_GR(x) (((x)&0x00000007)<<24) -#define FIFO_CTRL_IPMASK (0x00800000) -#define FIFO_CTRL_FAEMASK (0x00400000) -#define FIFO_CTRL_RXWMASK (0x00200000) -#define FIFO_CTRL_UFMASK (0x00100000) -#define FIFO_CTRL_OFMASK (0x00080000) - -#endif /* fsl_mcdmafec_h */ diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h index 411b00899c2..b118a917542 100644 --- a/arch/m68k/include/asm/immap.h +++ b/arch/m68k/include/asm/immap.h @@ -314,21 +314,6 @@ #include <asm/immap_547x_8x.h> #include <asm/m547x_8x.h> -#ifdef CONFIG_FSLDMAFEC -#define FEC0_RX_TASK 0 -#define FEC0_TX_TASK 1 -#define FEC0_RX_PRIORITY 6 -#define FEC0_TX_PRIORITY 7 -#define FEC0_RX_INIT 16 -#define FEC0_TX_INIT 17 -#define FEC1_RX_TASK 2 -#define FEC1_TX_TASK 3 -#define FEC1_RX_PRIORITY 6 -#define FEC1_TX_PRIORITY 7 -#define FEC1_RX_INIT 30 -#define FEC1_TX_INIT 31 -#endif - #define CFG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x100)) #ifdef CONFIG_SLTTMR diff --git a/arch/m68k/lib/fec.c b/arch/m68k/lib/fec.c index d6f238e4b34..ac36aec0ed7 100644 --- a/arch/m68k/lib/fec.c +++ b/arch/m68k/lib/fec.c @@ -10,7 +10,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_MCFFEC) || defined(CONFIG_FSLDMAFEC) +#if defined(CONFIG_MCFFEC) static int fec_get_node(int fec_idx) { char fec_alias[5] = {"fec"}; @@ -77,4 +77,4 @@ int fec_get_mii_base(int fec_idx, u32 *mii_base) return fec_get_fdt_prop(fec_idx, "mii-base", mii_base); } -#endif //CONFIG_MCFFEC || CONFIG_FSLDMAFEC +#endif //CONFIG_MCFFEC diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index f5cb000de6b..340f9a0da56 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -3,7 +3,6 @@ * Copyright (C) 2004-2009 Freescale Semiconductor, Inc. */ -#include <common.h> #include <asm-offsets.h> #include <mpc83xx.h> #include <system-constants.h> @@ -19,6 +18,8 @@ #ifdef CONFIG_QE #include <fsl_qe.h> #endif +#include <asm/ppc.h> +#include <asm/fsl_lbc.h> #include "lblaw/lblaw.h" #include "elbc/elbc.h" diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index d72d3147f63..ceb54867894 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -20,6 +20,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/fsl_lbc.h> #include <asm/u-boot.h> #include "hrcw/hrcw.h" diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 96183ac2c84..b770d294e61 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -9,7 +9,6 @@ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. */ -#include <common.h> #include <display_options.h> #include <env.h> #include <init.h> diff --git a/arch/powerpc/cpu/mpc8xx/cache.c b/arch/powerpc/cpu/mpc8xx/cache.c index 41559009cac..525c87f37cd 100644 --- a/arch/powerpc/cpu/mpc8xx/cache.c +++ b/arch/powerpc/cpu/mpc8xx/cache.c @@ -4,7 +4,6 @@ * Christophe Leroy, CS Systemes d'Information, christophe.leroy@c-s.fr */ -#include <common.h> #include <cpu_func.h> #include <asm/processor.h> #include <asm/ppc.h> diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c index 56383cecde2..b9afd312ec6 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu.c +++ b/arch/powerpc/cpu/mpc8xx/cpu.c @@ -16,7 +16,6 @@ * Wolfgang Denk <wd@denx.de> */ -#include <common.h> #include <cpu_func.h> #include <display_options.h> #include <net.h> diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index feef792ee77..aac4203a6e4 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -4,7 +4,6 @@ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. */ -#include <common.h> #include <init.h> #include <watchdog.h> diff --git a/arch/powerpc/cpu/mpc8xx/fdt.c b/arch/powerpc/cpu/mpc8xx/fdt.c index b4a26efe302..b204a3d7517 100644 --- a/arch/powerpc/cpu/mpc8xx/fdt.c +++ b/arch/powerpc/cpu/mpc8xx/fdt.c @@ -5,7 +5,6 @@ * Code copied & edited from Freescale mpc85xx stuff. */ -#include <common.h> #include <time.h> #include <asm/global_data.h> #include <linux/libfdt.h> diff --git a/arch/powerpc/cpu/mpc8xx/immap.c b/arch/powerpc/cpu/mpc8xx/immap.c index 40793c26e12..8c85fc180b9 100644 --- a/arch/powerpc/cpu/mpc8xx/immap.c +++ b/arch/powerpc/cpu/mpc8xx/immap.c @@ -8,7 +8,6 @@ * MPC8xx Internal Memory Map Functions */ -#include <common.h> #include <command.h> #include <asm/global_data.h> @@ -16,6 +15,7 @@ #include <asm/cpm_8xx.h> #include <asm/iopin_8xx.h> #include <asm/io.h> +#include <asm/ppc.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/cpu/mpc8xx/interrupts.c b/arch/powerpc/cpu/mpc8xx/interrupts.c index eef1951f2fd..babef07ffb1 100644 --- a/arch/powerpc/cpu/mpc8xx/interrupts.c +++ b/arch/powerpc/cpu/mpc8xx/interrupts.c @@ -4,7 +4,7 @@ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. */ -#include <common.h> +#include <stdio.h> #include <irq_func.h> #include <mpc8xx.h> #include <mpc8xx_irq.h> diff --git a/arch/powerpc/cpu/mpc8xx/speed.c b/arch/powerpc/cpu/mpc8xx/speed.c index 1a882a38820..baf81381b39 100644 --- a/arch/powerpc/cpu/mpc8xx/speed.c +++ b/arch/powerpc/cpu/mpc8xx/speed.c @@ -4,12 +4,12 @@ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. */ -#include <common.h> #include <clock_legacy.h> #include <mpc8xx.h> #include <asm/global_data.h> #include <asm/processor.h> #include <asm/io.h> +#include <asm/immap_8xx.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/cpu/mpc8xx/traps.c b/arch/powerpc/cpu/mpc8xx/traps.c index 56794b08a15..5220c560e5f 100644 --- a/arch/powerpc/cpu/mpc8xx/traps.c +++ b/arch/powerpc/cpu/mpc8xx/traps.c @@ -15,7 +15,7 @@ * This file handles the architecture-dependent parts of hardware exceptions */ -#include <common.h> +#include <vsprintf.h> #include <asm/ptrace.h> #include <command.h> #include <asm/processor.h> diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index a03f091c305..95f0f559b4c 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -6,9 +6,6 @@ #ifndef __ASM_PPC_FSL_LBC_H #define __ASM_PPC_FSL_LBC_H -#include <config.h> -#include <common.h> - #ifdef CONFIG_MPC85xx void lbc_sdram_init(void); #endif diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index 6ed21c781fe..43d71f5caec 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -9,7 +9,7 @@ #define __ASM_GBL_DATA_H #include <config.h> -#include "asm/types.h" +#include <linux/types.h> /* Architecture-specific global data */ struct arch_global_data { diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index 95c26d855ab..cbae5109e85 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -287,6 +287,23 @@ int os_persistent_file(char *buf, int maxsize, const char *fname) return 0; } +int os_mktemp(char *fname, off_t size) +{ + int fd; + + fd = mkostemp(fname, O_CLOEXEC); + if (fd < 0) + return -errno; + + if (unlink(fname) < 0) + return -errno; + + if (ftruncate(fd, size)) + return -errno; + + return fd; +} + /* Restore tty state when we exit */ static struct termios orig_term; static bool term_setup; diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index c7197795efb..9131eda970b 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -1914,6 +1914,71 @@ compatible = "sandbox,arm-ffa"; }; }; + + nand-controller { + #address-cells = <1>; + #size-cells = <0>; + compatible = "sandbox,nand"; + + nand@0 { + reg = <0>; + nand-ecc-mode = "soft"; + sandbox,id = [00 e3]; + sandbox,erasesize = <(8 * 1024)>; + sandbox,oobsize = <16>; + sandbox,pagesize = <512>; + sandbox,pages = <0x2000>; + sandbox,err-count = <1>; + sandbox,err-step-size = <512>; + }; + + /* MT29F64G08AKABA */ + nand@1 { + reg = <1>; + nand-ecc-mode = "soft_bch"; + sandbox,id = [2C 48 00 26 89 00 00 00]; + sandbox,onfi = [ + 4f 4e 46 49 0e 00 5a 00 + ff 01 00 00 00 00 03 00 + 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 + 4d 49 43 52 4f 4e 20 20 + 20 20 20 20 4d 54 32 39 + 46 36 34 47 30 38 41 4b + 41 42 41 43 35 20 20 20 + 2c 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 + 00 10 00 00 e0 00 00 02 + 00 00 1c 00 80 00 00 00 + 00 10 00 00 02 23 01 50 + 00 01 05 01 00 00 04 00 + 04 01 1e 00 00 00 00 00 + 00 00 00 00 00 00 00 00 + 0e 1f 00 1f 00 f4 01 ac + 0d 19 00 c8 00 00 00 00 + 00 00 00 00 00 00 0a 07 + 19 00 00 00 00 00 00 00 + 00 00 00 00 01 00 01 00 + 00 00 04 10 01 81 04 02 + 02 01 1e 90 00 00 00 00 + 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 + 00 00 00 00 00 03 20 7d + ]; + sandbox,erasesize = <(512 * 1024)>; + sandbox,oobsize = <224>; + sandbox,pagesize = <4096>; + sandbox,pages = <0x200000>; + sandbox,err-count = <3>; + sandbox,err-step-size = <512>; + }; + }; }; #include "sandbox_pmic.dtsi" diff --git a/arch/sandbox/include/asm/barrier.h b/arch/sandbox/include/asm/barrier.h new file mode 100644 index 00000000000..0928a78cbf8 --- /dev/null +++ b/arch/sandbox/include/asm/barrier.h @@ -0,0 +1,3 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#define nop() diff --git a/arch/sandbox/include/asm/clk.h b/arch/sandbox/include/asm/clk.h index df7156fe317..2b7dbca8f75 100644 --- a/arch/sandbox/include/asm/clk.h +++ b/arch/sandbox/include/asm/clk.h @@ -6,7 +6,6 @@ #ifndef __SANDBOX_CLK_H #define __SANDBOX_CLK_H -#include <common.h> #include <clk.h> #include <dt-structs.h> #include <linux/clk-provider.h> diff --git a/arch/sandbox/include/asm/mbox.h b/arch/sandbox/include/asm/mbox.h index 70f36d7afef..499e9a67f6a 100644 --- a/arch/sandbox/include/asm/mbox.h +++ b/arch/sandbox/include/asm/mbox.h @@ -6,8 +6,6 @@ #ifndef __SANDBOX_MBOX_H #define __SANDBOX_MBOX_H -#include <common.h> - #define SANDBOX_MBOX_PING_XOR 0x12345678 struct udevice; diff --git a/arch/sandbox/include/asm/power-domain.h b/arch/sandbox/include/asm/power-domain.h index 1845bc8d3ba..4d5e861dbce 100644 --- a/arch/sandbox/include/asm/power-domain.h +++ b/arch/sandbox/include/asm/power-domain.h @@ -6,8 +6,6 @@ #ifndef __SANDBOX_POWER_DOMAIN_H #define __SANDBOX_POWER_DOMAIN_H -#include <common.h> - struct udevice; int sandbox_power_domain_query(struct udevice *dev, unsigned long id); diff --git a/arch/sandbox/include/asm/reset.h b/arch/sandbox/include/asm/reset.h index 40d3e61c110..f0709b41c09 100644 --- a/arch/sandbox/include/asm/reset.h +++ b/arch/sandbox/include/asm/reset.h @@ -6,8 +6,6 @@ #ifndef __SANDBOX_RESET_H #define __SANDBOX_RESET_H -#include <common.h> - struct udevice; int sandbox_reset_query(struct udevice *dev, unsigned long id); diff --git a/arch/sandbox/include/asm/spl.h b/arch/sandbox/include/asm/spl.h index f349ea19971..4fab24cd156 100644 --- a/arch/sandbox/include/asm/spl.h +++ b/arch/sandbox/include/asm/spl.h @@ -15,6 +15,7 @@ enum { BOOT_DEVICE_CPGMAC, BOOT_DEVICE_NOR, BOOT_DEVICE_SPI, + BOOT_DEVICE_NAND, }; /** diff --git a/arch/x86/include/asm/arch-slimbootloader/slimbootloader.h b/arch/x86/include/asm/arch-slimbootloader/slimbootloader.h index 05dd1b2b447..460bfc4f2d4 100644 --- a/arch/x86/include/asm/arch-slimbootloader/slimbootloader.h +++ b/arch/x86/include/asm/arch-slimbootloader/slimbootloader.h @@ -6,7 +6,6 @@ #ifndef __SLIMBOOTLOADER_ARCH_H__ #define __SLIMBOOTLOADER_ARCH_H__ -#include <common.h> #include <asm/hob.h> /** diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index 8be1003e6ba..c79ec64afd7 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -7,7 +7,6 @@ #ifndef __ASM_X86_DMA_MAPPING_H #define __ASM_X86_DMA_MAPPING_H -#include <common.h> #include <asm/cache.h> #include <cpu_func.h> #include <linux/dma-direction.h> diff --git a/board/cssi/cmpc885/cmpc885.c b/board/cssi/cmpc885/cmpc885.c index 5e6aa8b8cfa..e11cfafaa58 100644 --- a/board/cssi/cmpc885/cmpc885.c +++ b/board/cssi/cmpc885/cmpc885.c @@ -9,7 +9,6 @@ */ #include <env.h> -#include <common.h> #include <mpc8xx.h> #include <asm/cpm_8xx.h> #include <asm/io.h> diff --git a/board/cssi/cmpc885/nand.c b/board/cssi/cmpc885/nand.c index 38100046df8..b8989f226b0 100644 --- a/board/cssi/cmpc885/nand.c +++ b/board/cssi/cmpc885/nand.c @@ -7,7 +7,6 @@ */ #include <config.h> -#include <common.h> #include <nand.h> #include <linux/bitops.h> #include <linux/mtd/rawnand.h> diff --git a/board/cssi/cmpc885/sdram.c b/board/cssi/cmpc885/sdram.c index 7349b85ed2a..11a50c3a52d 100644 --- a/board/cssi/cmpc885/sdram.c +++ b/board/cssi/cmpc885/sdram.c @@ -4,13 +4,14 @@ * Charles Frey <charles.frey@c-s.fr> */ -#include <common.h> #include <linux/sizes.h> #include <linux/delay.h> #include <init.h> #include <asm/io.h> #include <mpc8xx.h> #include <watchdog.h> +#include <asm/ppc.h> +#include <asm/immap_8xx.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/cssi/cmpcpro/cmpcpro.c b/board/cssi/cmpcpro/cmpcpro.c index 8a30c48e35b..ef304124564 100644 --- a/board/cssi/cmpcpro/cmpcpro.c +++ b/board/cssi/cmpcpro/cmpcpro.c @@ -4,7 +4,6 @@ */ #include <command.h> -#include <common.h> #include <dm.h> #include <env.h> #include <env_internal.h> diff --git a/board/cssi/mcr3000/mcr3000.c b/board/cssi/mcr3000/mcr3000.c index 3514f674901..8857c9e42c7 100644 --- a/board/cssi/mcr3000/mcr3000.c +++ b/board/cssi/mcr3000/mcr3000.c @@ -7,7 +7,6 @@ * Board specific routines for the MCR3000 board */ -#include <common.h> #include <env.h> #include <hwconfig.h> #include <init.h> diff --git a/board/cssi/mcr3000/nand.c b/board/cssi/mcr3000/nand.c index 11aca4ff736..5b01d30fef1 100644 --- a/board/cssi/mcr3000/nand.c +++ b/board/cssi/mcr3000/nand.c @@ -6,7 +6,6 @@ */ #include <config.h> -#include <common.h> #include <nand.h> #include <linux/mtd/rawnand.h> #include <asm/io.h> diff --git a/board/emulation/qemu-arm/Kconfig b/board/emulation/qemu-arm/Kconfig index 09c95413a54..ac2d078f42a 100644 --- a/board/emulation/qemu-arm/Kconfig +++ b/board/emulation/qemu-arm/Kconfig @@ -5,8 +5,7 @@ config TEXT_BASE config BOARD_SPECIFIC_OPTIONS # dummy def_bool y - select CMD_QFW - select QFW_MMIO + select QFW_MMIO if CMD_QFW imply VIRTIO_MMIO imply VIRTIO_PCI imply VIRTIO_NET diff --git a/board/emulation/qemu-riscv/Kconfig b/board/emulation/qemu-riscv/Kconfig index d56b4b5bc1e..108e9fdb00a 100644 --- a/board/emulation/qemu-riscv/Kconfig +++ b/board/emulation/qemu-riscv/Kconfig @@ -59,7 +59,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply PCIE_ECAM_GENERIC imply DM_RNG imply SCSI - imply DM_SCSI imply SYS_NS16550 imply SIFIVE_SERIAL imply HTIF_CONSOLE if 64BIT diff --git a/board/emulation/qemu-x86/Kconfig b/board/emulation/qemu-x86/Kconfig index 787751abba4..01dc1d497ae 100644 --- a/board/emulation/qemu-x86/Kconfig +++ b/board/emulation/qemu-x86/Kconfig @@ -20,7 +20,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy def_bool y select X86_RESET_VECTOR select QEMU - select QFW_PIO + select QFW_PIO if CMD_QFW select BOARD_ROMSIZE_KB_1024 imply VIRTIO_PCI imply VIRTIO_NET diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c index 46ffd817b44..228f07502f7 100644 --- a/board/freescale/common/arm_sleep.c +++ b/board/freescale/common/arm_sleep.c @@ -3,7 +3,6 @@ * Copyright 2014 Freescale Semiconductor, Inc. */ -#include <common.h> #include <log.h> #include <asm/global_data.h> #include <asm/io.h> diff --git a/board/freescale/common/mpc85xx_sleep.c b/board/freescale/common/mpc85xx_sleep.c index d3323b9ec1e..d4ca278e883 100644 --- a/board/freescale/common/mpc85xx_sleep.c +++ b/board/freescale/common/mpc85xx_sleep.c @@ -3,8 +3,8 @@ * Copyright 2014 Freescale Semiconductor, Inc. */ -#include <common.h> #include <log.h> +#include <asm/cache.h> #include <asm/global_data.h> #include <asm/immap_85xx.h> #include "sleep.h" diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index a618ce11a58..930ef6be385 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -4,7 +4,6 @@ * Copyright 2019, 2021 NXP */ -#include <common.h> #include <clock_legacy.h> #include <fdt_support.h> #include <i2c.h> diff --git a/board/freescale/ls1021atsn/ls1021atsn.c b/board/freescale/ls1021atsn/ls1021atsn.c index d0e4e796c60..b7e043b2e62 100644 --- a/board/freescale/ls1021atsn/ls1021atsn.c +++ b/board/freescale/ls1021atsn/ls1021atsn.c @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright 2016-2019, 2021 NXP */ -#include <common.h> #include <clock_legacy.h> #include <fdt_support.h> #include <init.h> diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 27b9d79e5f0..78006afce86 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -4,7 +4,6 @@ * Copyright 2019, 2021-2022 NXP */ -#include <common.h> #include <clock_legacy.h> #include <command.h> #include <fdt_support.h> diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index 18869d8c1df..cf84ff9e638 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -4,7 +4,6 @@ * Copyright 2021-2022 NXP */ -#include <common.h> #include <i2c.h> #include <init.h> #include <asm/global_data.h> diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c index f62f5fd2745..2fece3a1b09 100644 --- a/board/freescale/ls1088a/eth_ls1088aqds.c +++ b/board/freescale/ls1088a/eth_ls1088aqds.c @@ -3,6 +3,8 @@ * Copyright 2017 NXP */ +#include <vsprintf.h> +#include <linux/string.h> #include <asm/io.h> #include <asm/arch/fsl_serdes.h> #include <fsl-mc/fsl_mc.h> diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c index 0d0d5de1562..048ab44c591 100644 --- a/board/freescale/ls2080aqds/eth.c +++ b/board/freescale/ls2080aqds/eth.c @@ -3,6 +3,8 @@ * Copyright 2015 Freescale Semiconductor, Inc. */ +#include <vsprintf.h> +#include <linux/string.h> #include <asm/io.h> #include <asm/arch/fsl_serdes.h> #include <fsl-mc/fsl_mc.h> diff --git a/board/friendlyarm/nanopi2/onewire.c b/board/friendlyarm/nanopi2/onewire.c index 56f0f2dfceb..4f0b1e33c2d 100644 --- a/board/friendlyarm/nanopi2/onewire.c +++ b/board/friendlyarm/nanopi2/onewire.c @@ -11,16 +11,13 @@ #include <asm/arch/clk.h> #include <asm/arch/pwm.h> #include <i2c.h> +#include <linux/time.h> #include <irq_func.h> #include <asm/arch/nexell.h> #include <asm/arch/nx_gpio.h> -#ifndef NSEC_PER_SEC -#define NSEC_PER_SEC 1000000000L -#endif - #define SAMPLE_BPS 9600 #define SAMPLE_IN_US 101 /* (1000000 / BPS) */ diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c index b5fa5101e88..7f67d1e4530 100644 --- a/board/highbank/highbank.c +++ b/board/highbank/highbank.c @@ -52,19 +52,6 @@ int board_init(void) return 0; } -#ifdef CONFIG_SCSI_AHCI_PLAT -void scsi_init(void) -{ - u32 reg = readl(HB_SREG_A9_PWRDOM_STAT); - - cphy_disable_overrides(); - if (reg & PWRDOM_STAT_SATA) { - ahci_init((void __iomem *)HB_AHCI_BASE); - scsi_scan(true); - } -} -#endif - #ifdef CONFIG_MISC_INIT_R int misc_init_r(void) { diff --git a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c index 21c21aac221..cc3611e2dec 100644 --- a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c +++ b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c @@ -3,7 +3,7 @@ * Copyright 2020 Hitachi Power Grids. All rights reserved. */ -#include <common.h> +#include <config.h> #include <event.h> #include <i2c.h> #include <asm/io.h> diff --git a/board/st/stm32mp2/Kconfig b/board/st/stm32mp2/Kconfig new file mode 100644 index 00000000000..89039f068a2 --- /dev/null +++ b/board/st/stm32mp2/Kconfig @@ -0,0 +1,13 @@ +if TARGET_ST_STM32MP25X + +config SYS_BOARD + default "stm32mp2" + +config SYS_VENDOR + default "st" + +config SYS_CONFIG_NAME + default "stm32mp25_common" + +source "board/st/common/Kconfig" +endif diff --git a/board/st/stm32mp2/MAINTAINERS b/board/st/stm32mp2/MAINTAINERS new file mode 100644 index 00000000000..e6bea910f92 --- /dev/null +++ b/board/st/stm32mp2/MAINTAINERS @@ -0,0 +1,9 @@ +STM32MP2 BOARD +M: Patrice Chotard <patrice.chotard@st.com> +M: Patrick Delaunay <patrick.delaunay@st.com> +L: uboot-stm32@st-md-mailman.stormreply.com (moderated for non-subscribers) +S: Maintained +F: arch/arm/dts/stm32mp25* +F: board/st/stm32mp2/ +F: configs/stm32mp25_defconfig +F: include/configs/stm32mp25_common.h diff --git a/board/st/stm32mp2/Makefile b/board/st/stm32mp2/Makefile new file mode 100644 index 00000000000..50352fb71b4 --- /dev/null +++ b/board/st/stm32mp2/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +# +# Copyright (C) 2023, STMicroelectronics - All Rights Reserved +# + +obj-y += stm32mp2.o diff --git a/board/st/stm32mp2/stm32mp2.c b/board/st/stm32mp2/stm32mp2.c new file mode 100644 index 00000000000..c97a7efff46 --- /dev/null +++ b/board/st/stm32mp2/stm32mp2.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + */ + +#define LOG_CATEGORY LOGC_BOARD + +#include <config.h> +#include <env.h> +#include <fdt_support.h> +#include <asm/global_data.h> +#include <asm/arch/sys_proto.h> + +/* + * Get a global data pointer + */ +DECLARE_GLOBAL_DATA_PTR; + +/* board dependent setup after realloc */ +int board_init(void) +{ + return 0; +} + +int board_late_init(void) +{ + const void *fdt_compat; + int fdt_compat_len; + char dtb_name[256]; + int buf_len; + + if (IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) { + fdt_compat = fdt_getprop(gd->fdt_blob, 0, "compatible", + &fdt_compat_len); + if (fdt_compat && fdt_compat_len) { + if (strncmp(fdt_compat, "st,", 3) != 0) { + env_set("board_name", fdt_compat); + } else { + env_set("board_name", fdt_compat + 3); + + buf_len = sizeof(dtb_name); + strlcpy(dtb_name, fdt_compat + 3, buf_len); + buf_len -= strlen(fdt_compat + 3); + strlcat(dtb_name, ".dtb", buf_len); + env_set("fdtfile", dtb_name); + } + } + } + + return 0; +} diff --git a/board/ti/am62ax/evm.c b/board/ti/am62ax/evm.c index f2dd3b4192e..cd3360a4302 100644 --- a/board/ti/am62ax/evm.c +++ b/board/ti/am62ax/evm.c @@ -8,7 +8,6 @@ #include <asm/arch/hardware.h> #include <asm/io.h> -#include <common.h> #include <dm/uclass.h> #include <env.h> #include <fdt_support.h> diff --git a/board/ti/am64x/evm.c b/board/ti/am64x/evm.c index a080b2b0d25..a6dcff2eb43 100644 --- a/board/ti/am64x/evm.c +++ b/board/ti/am64x/evm.c @@ -7,7 +7,6 @@ * */ -#include <common.h> #include <asm/io.h> #include <dm/uclass.h> #include <k3-ddrss.h> diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c index 9de3ddaa280..975eb17946f 100644 --- a/board/ti/am65x/evm.c +++ b/board/ti/am65x/evm.c @@ -7,7 +7,6 @@ * */ -#include <common.h> #include <dm.h> #include <fdt_support.h> #include <image.h> diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c index c13c6b2533a..9d80dd6f589 100644 --- a/board/ti/j721e/evm.c +++ b/board/ti/j721e/evm.c @@ -7,7 +7,6 @@ * */ -#include <common.h> #include <env.h> #include <fdt_support.h> #include <generic-phy.h> diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c index 01eb4965d92..db717390771 100644 --- a/board/ti/j721s2/evm.c +++ b/board/ti/j721s2/evm.c @@ -7,7 +7,6 @@ * */ -#include <common.h> #include <env.h> #include <fdt_support.h> #include <generic-phy.h> diff --git a/boot/Kconfig b/boot/Kconfig index fbc49c5bca4..ef71883a502 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -346,8 +346,16 @@ config PXE_UTILS help Utilities for parsing PXE file formats. -config BOOT_DEFAULTS - bool # Common defaults for standard boot and distroboot +config BOOT_DEFAULTS_FEATURES + bool + select SUPPORT_RAW_INITRD + select ENV_VARS_UBOOT_CONFIG + imply USB_STORAGE + imply EFI_PARTITION + imply ISO_PARTITION + +config BOOT_DEFAULTS_CMDS + bool imply USE_BOOTCOMMAND select CMD_ENV_EXISTS select CMD_EXT2 @@ -358,14 +366,14 @@ config BOOT_DEFAULTS select CMD_DHCP if CMD_NET select CMD_PING if CMD_NET select CMD_PXE if CMD_NET - select SUPPORT_RAW_INITRD - select ENV_VARS_UBOOT_CONFIG select CMD_BOOTI if ARM64 select CMD_BOOTZ if ARM && !ARM64 imply CMD_MII if NET - imply USB_STORAGE - imply EFI_PARTITION - imply ISO_PARTITION + +config BOOT_DEFAULTS + bool # Common defaults for standard boot and distroboot + select BOOT_DEFAULTS_FEATURES + select BOOT_DEFAULTS_CMDS if CMDLINE help These are not required but are commonly needed to support a good selection of booting methods. Enable this to improve the capability @@ -431,7 +439,6 @@ config BOOTSTD_FULL config BOOTSTD_DEFAULTS bool "Select some common defaults for standard boot" depends on BOOTSTD - imply USE_BOOTCOMMAND select BOOT_DEFAULTS select BOOTMETH_DISTRO help @@ -504,7 +511,7 @@ config BOOTMETH_EXTLINUX_PXE config BOOTMETH_EFILOADER bool "Bootdev support for EFI boot" - depends on EFI_LOADER + depends on CMD_BOOTEFI default y help Enables support for EFI boot using bootdevs. This makes the @@ -536,10 +543,10 @@ config BOOTMETH_VBE config BOOTMETH_DISTRO bool # Options needed to boot any distro - select BOOTMETH_SCRIPT # E.g. Armbian uses scripts + select BOOTMETH_SCRIPT if CMDLINE # E.g. Armbian uses scripts select BOOTMETH_EXTLINUX # E.g. Debian uses these select BOOTMETH_EXTLINUX_PXE if CMD_PXE && CMD_NET && DM_ETH - select BOOTMETH_EFILOADER if EFI_LOADER # E.g. Ubuntu uses this + select BOOTMETH_EFILOADER if CMD_BOOTEFI # E.g. Ubuntu uses this config SPL_BOOTMETH_VBE bool "Bootdev support for Verified Boot for Embedded (SPL)" @@ -664,6 +671,7 @@ config BOOTMETH_SANDBOX config BOOTMETH_SCRIPT bool "Bootdev support for U-Boot scripts" default y if BOOTSTD_FULL + depends on CMDLINE select HUSH_PARSER help Enables support for booting a distro via a U-Boot script. This makes @@ -717,6 +725,17 @@ if MEASURED_BOOT event log memory region. endif # MEASURED_BOOT +config SYS_BOOTM_LEN + hex "Maximum size of a decompresed OS image" + depends on CMD_BOOTM || CMD_BOOTI || CMD_BOOTZ || \ + LEGACY_IMAGE_FORMAT || SPL_LEGACY_IMAGE_FORMAT + default 0x4000000 if PPC || ARM64 + default 0x1000000 if X86 || ARCH_MX6 || ARCH_MX7 + default 0x800000 + help + This is the maximum size of the buffer that is used to decompress the OS + image in to if attempting to boot a compressed image. + config SUPPORT_RAW_INITRD bool "Enable raw initrd images" help @@ -809,6 +828,7 @@ endmenu # Boot images config DISTRO_DEFAULTS bool "(deprecated) Script-based booting of Linux distributions" + select CMDLINE select BOOT_DEFAULTS select AUTO_COMPLETE select CMDLINE_EDITING @@ -1194,14 +1214,16 @@ menu "Autoboot options" config AUTOBOOT bool "Autoboot" + depends on CMDLINE default y help This enables the autoboot. See doc/README.autoboot for detail. +if AUTOBOOT + config BOOTDELAY int "delay in seconds before automatically booting" default 2 - depends on AUTOBOOT help Delay before automatically running bootcmd; set to 0 to autoboot with no delay, but you can stop it by key input. @@ -1223,9 +1245,11 @@ config AUTOBOOT_KEYED U-Boot automatic booting process and bring the device to the U-Boot prompt for user input. +if AUTOBOOT_KEYED + config AUTOBOOT_FLUSH_STDIN bool "Enable flushing stdin before starting to read the password" - depends on AUTOBOOT_KEYED && !SANDBOX + depends on !SANDBOX help When this option is enabled stdin buffer will be flushed before starting to read the password. @@ -1234,7 +1258,6 @@ config AUTOBOOT_FLUSH_STDIN config AUTOBOOT_PROMPT string "Autoboot stop prompt" - depends on AUTOBOOT_KEYED default "Autoboot in %d seconds\\n" help This string is displayed before the boot delay selected by @@ -1250,7 +1273,6 @@ config AUTOBOOT_PROMPT config AUTOBOOT_ENCRYPTION bool "Enable encryption in autoboot stopping" - depends on AUTOBOOT_KEYED help This option allows a string to be entered into U-Boot to stop the autoboot. @@ -1277,7 +1299,7 @@ config AUTOBOOT_SHA256_FALLBACK config AUTOBOOT_DELAY_STR string "Delay autobooting via specific input key / string" - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION + depends on !AUTOBOOT_ENCRYPTION help This option delays the automatic boot feature by issuing a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR @@ -1289,7 +1311,7 @@ config AUTOBOOT_DELAY_STR config AUTOBOOT_STOP_STR string "Stop autobooting via specific input key / string" - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION + depends on !AUTOBOOT_ENCRYPTION help This option enables stopping (aborting) of the automatic boot feature only by issuing a specific input key or @@ -1301,7 +1323,7 @@ config AUTOBOOT_STOP_STR config AUTOBOOT_KEYED_CTRLC bool "Enable Ctrl-C autoboot interruption" - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION + depends on !AUTOBOOT_ENCRYPTION help This option allows for the boot sequence to be interrupted by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey". @@ -1310,7 +1332,7 @@ config AUTOBOOT_KEYED_CTRLC config AUTOBOOT_NEVER_TIMEOUT bool "Make the password entry never time-out" - depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION && CRYPT_PW + depends on AUTOBOOT_ENCRYPTION && CRYPT_PW help This option removes the timeout from the password entry when the user first presses the <Enter> key before entering @@ -1318,7 +1340,7 @@ config AUTOBOOT_NEVER_TIMEOUT config AUTOBOOT_STOP_STR_ENABLE bool "Enable fixed string to stop autobooting" - depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION + depends on AUTOBOOT_ENCRYPTION help This option enables the feature to add a fixed stop string that is defined at compile time. @@ -1349,9 +1371,12 @@ config AUTOBOOT_STOP_STR_SHA256 includes a ":", the portion prior to the ":" will be treated as a salt value. +endif # AUTOBOOT_KEYED + +if !AUTOBOOT_KEYED + config AUTOBOOT_USE_MENUKEY bool "Allow a specify key to run a menu from the environment" - depends on !AUTOBOOT_KEYED help If a specific key is pressed to stop autoboot, then the commands in the environment variable 'menucmd' are executed before boot starts. @@ -1366,6 +1391,10 @@ config AUTOBOOT_MENUKEY For example, 33 means "!" in ASCII, so pressing ! at boot would take this action. +endif + +endif # AUTOBOOT + config AUTOBOOT_MENU_SHOW bool "Show a menu on boot" depends on CMD_BOOTMENU @@ -1561,6 +1590,7 @@ config BOOTARGS_SUBST config USE_BOOTCOMMAND bool "Enable a default value for bootcmd" + depends on CMDLINE help Provide a default value for the bootcmd entry in the environment. If autoboot is enabled this is what will be run automatically. Enable @@ -1580,6 +1610,7 @@ config BOOTCOMMAND config USE_PREBOOT bool "Enable preboot" + depends on CMDLINE help When this option is enabled, the existence of the environment variable "preboot" will be checked immediately before starting the diff --git a/boot/Makefile b/boot/Makefile index ad608598d29..3fd048bb41a 100644 --- a/boot/Makefile +++ b/boot/Makefile @@ -28,7 +28,7 @@ obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootstd-uclass.o obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EXTLINUX) += bootmeth_extlinux.o obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EXTLINUX_PXE) += bootmeth_pxe.o obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EFILOADER) += bootmeth_efi.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_CROS) += bootmeth_cros.o +obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_CROS) += bootm.o bootm_os.o bootmeth_cros.o obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_SANDBOX) += bootmeth_sandbox.o obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_SCRIPT) += bootmeth_script.o ifdef CONFIG_$(SPL_TPL_)BOOTSTD_FULL diff --git a/boot/bootm_os.c b/boot/bootm_os.c index 9c035b5be88..30296eb27d7 100644 --- a/boot/bootm_os.c +++ b/boot/bootm_os.c @@ -317,13 +317,6 @@ static int do_bootm_vxworks_legacy(int flag, int argc, char *const argv[], if (flag != BOOTM_STATE_OS_GO) return 0; -#if defined(CONFIG_FIT) - if (!images->legacy_hdr_valid) { - fit_unsupported_reset("VxWorks"); - return 1; - } -#endif - do_bootvx_fdt(images); return 1; diff --git a/cmd/Kconfig b/cmd/Kconfig index df6d71c103f..6f636155e5b 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1,7 +1,5 @@ -menu "Command line interface" - -config CMDLINE - bool "Support U-Boot commands" +menuconfig CMDLINE + bool "Command line interface" default y help Enable U-Boot's command-line functions. This provides a means @@ -11,9 +9,10 @@ config CMDLINE Depending on the number of commands enabled, this can add substantially to the size of U-Boot. +if CMDLINE + config HUSH_PARSER bool "Use hush shell" - depends on CMDLINE help This option enables the "hush" shell (from Busybox) as command line interpreter, thus enabling powerful command line syntax like @@ -25,7 +24,6 @@ config HUSH_PARSER config CMDLINE_EDITING bool "Enable command line editing" - depends on CMDLINE default y help Enable editing and History functions for interactive command line @@ -40,15 +38,13 @@ config CMDLINE_PS_SUPPORT config AUTO_COMPLETE bool "Enable auto complete using TAB" - depends on CMDLINE default y help Enable auto completion of commands using TAB. config SYS_LONGHELP bool "Enable long help messages" - depends on CMDLINE - default y if CMDLINE + default y help Defined when you want long help messages included Do not set this option when short of memory. @@ -75,24 +71,9 @@ config SYS_MAXARGS int "Maximum number arguments accepted by commands" default 16 -config SYS_CBSIZE - int "Console input buffer size" - default 2048 if ARCH_TEGRA || ARCH_VERSAL || ARCH_ZYNQ || ARCH_ZYNQMP || \ - RCAR_GEN3 || TARGET_SOCFPGA_SOC64 - default 512 if ARCH_MX5 || ARCH_MX6 || ARCH_MX7 || FSL_LSCH2 || \ - FSL_LSCH3 || X86 - default 256 if M68K || PPC - default 1024 - -config SYS_PBSIZE - int "Buffer size for console output" - default 1024 if ARCH_SUNXI - default 1044 - config SYS_XTRACE bool "Command execution tracer" - depends on CMDLINE - default y if CMDLINE + default y help This option enables the possiblity to print all commands before executing them and after all variables are evaluated (similar @@ -374,17 +355,6 @@ config BOOTM_VXWORKS help Support booting VxWorks images via the bootm command. -config SYS_BOOTM_LEN - hex "Maximum size of a decompresed OS image" - depends on CMD_BOOTM || CMD_BOOTI || CMD_BOOTZ || \ - LEGACY_IMAGE_FORMAT || SPL_LEGACY_IMAGE_FORMAT - default 0x4000000 if PPC || ARM64 - default 0x1000000 if X86 || ARCH_MX6 || ARCH_MX7 - default 0x800000 - help - This is the maximum size of the buffer that is used to decompress the OS - image in to, if passing a compressed image to bootm/booti/bootz. - config CMD_BOOTEFI bool "bootefi" depends on EFI_LOADER @@ -392,6 +362,15 @@ config CMD_BOOTEFI help Boot an EFI image from memory. +config CMD_BOOTEFI_BOOTMGR + bool "UEFI Boot Manager command" + depends on BOOTEFI_BOOTMGR && CMD_BOOTEFI + default y + help + Select this option to enable the 'bootmgr' subcommand of 'bootefi'. + This subcommand will allow you to select the UEFI binary to be booted + via UEFI variables Boot####, BootOrder, and BootNext. + config CMD_BOOTEFI_HELLO_COMPILE bool "Compile a standard EFI hello world binary for testing" depends on CMD_BOOTEFI && !CPU_V7M @@ -981,7 +960,6 @@ config CMD_ADC config CMD_BCB bool "bcb" - depends on MMC depends on PARTITIONS help Read/modify/write the fields of Bootloader Control Block, usually @@ -1152,13 +1130,6 @@ config CMD_GPT Enable the 'gpt' command to ready and write GPT style partition tables. -config RANDOM_UUID - bool "GPT Random UUID generation" - select LIB_UUID - help - Enable the generation of partitions with random UUIDs if none - are provided. - config CMD_GPT_RENAME bool "GPT partition renaming commands" depends on CMD_GPT @@ -2142,7 +2113,7 @@ config CMD_EFIDEBUG config CMD_EFICONFIG bool "eficonfig - provide menu-driven uefi variables maintenance interface" default y if !HAS_BOARD_SIZE_LIMIT - depends on CMD_BOOTEFI_BOOTMGR + depends on BOOTEFI_BOOTMGR select MENU help Enable the 'eficonfig' command which provides the menu-driven UEFI @@ -2257,6 +2228,8 @@ config CMD_SYSBOOT config CMD_QFW bool "qfw" select QFW + default y if TARGET_QEMU_ARM_32BIT || TARGET_QEMU_ARM_64BIT || \ + TARGET_QEMU_X86 || TARGET_QEMU_X86_64 help This provides access to the QEMU firmware interface. The main feature is to allow easy loading of files passed to qemu-system @@ -2370,6 +2343,7 @@ config CMD_VIDCONSOLE config CMD_SELECT_FONT bool "select font size" depends on VIDEO + default y if CONSOLE_TRUETYPE help Enabling this will provide 'font' command. Allows font selection at runtime. @@ -2902,4 +2876,5 @@ config CMD_MESON default y help Enable useful commands for the Meson Soc family developed by Amlogic Inc. -endmenu + +endif diff --git a/cmd/Makefile b/cmd/Makefile index 9a6790cc170..dbeeebe2c4b 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -128,6 +128,7 @@ endif obj-$(CONFIG_CMD_MUX) += mux.o obj-$(CONFIG_CMD_NAND) += nand.o obj-$(CONFIG_CMD_NET) += net.o +obj-$(CONFIG_ENV_SUPPORT) += nvedit.o obj-$(CONFIG_CMD_NVEDIT_EFI) += nvedit_efi.o obj-$(CONFIG_CMD_ONENAND) += onenand.o obj-$(CONFIG_CMD_OSD) += osd.o @@ -245,9 +246,6 @@ endif # !CONFIG_SPL_BUILD obj-$(CONFIG_$(SPL_)CMD_TLV_EEPROM) += tlv_eeprom.o -# core command -obj-y += nvedit.o - obj-$(CONFIG_CMD_BCM_EXT_UTILS) += broadcom/ filechk_data_gz = (echo "static const char data_gz[] ="; cat $< | scripts/bin2c; echo ";") diff --git a/cmd/bcb.c b/cmd/bcb.c index 02d0c70d87e..f3b92564d10 100644 --- a/cmd/bcb.c +++ b/cmd/bcb.c @@ -25,9 +25,18 @@ enum bcb_cmd { BCB_CMD_STORE, }; -static int bcb_dev = -1; -static int bcb_part = -1; +static const char * const fields[] = { + "command", + "status", + "recovery", + "stage" +}; + static struct bootloader_message bcb __aligned(ARCH_DMA_MINALIGN) = { { 0 } }; +static struct disk_partition partition_data; + +static struct blk_desc *block; +static struct disk_partition *partition = &partition_data; static int bcb_cmd_get(char *cmd) { @@ -53,6 +62,9 @@ static int bcb_is_misused(int argc, char *const argv[]) switch (cmd) { case BCB_CMD_LOAD: + if (argc != 3 && argc != 4) + goto err; + break; case BCB_CMD_FIELD_SET: if (argc != 3) goto err; @@ -78,7 +90,7 @@ static int bcb_is_misused(int argc, char *const argv[]) return -1; } - if (cmd != BCB_CMD_LOAD && (bcb_dev < 0 || bcb_part < 0)) { + if (cmd != BCB_CMD_LOAD && !block) { printf("Error: Please, load BCB first!\n"); return -1; } @@ -90,7 +102,7 @@ err: return -1; } -static int bcb_field_get(char *name, char **fieldp, int *sizep) +static int bcb_field_get(const char *name, char **fieldp, int *sizep) { if (!strcmp(name, "command")) { *fieldp = bcb.command; @@ -115,25 +127,30 @@ static int bcb_field_get(char *name, char **fieldp, int *sizep) return 0; } -static int __bcb_load(int devnum, const char *partp) +static void __bcb_reset(void) +{ + block = NULL; + partition = &partition_data; + memset(&partition_data, 0, sizeof(struct disk_partition)); + memset(&bcb, 0, sizeof(struct bootloader_message)); +} + +static int __bcb_initialize(const char *iface, int devnum, const char *partp) { - struct blk_desc *desc; - struct disk_partition info; - u64 cnt; char *endp; int part, ret; - desc = blk_get_devnum_by_uclass_id(UCLASS_MMC, devnum); - if (!desc) { + block = blk_get_dev(iface, devnum); + if (!block) { ret = -ENODEV; goto err_read_fail; } /* - * always select the USER mmc hwpart in case another + * always select the first hwpart in case another * blk operation selected a different hwpart */ - ret = blk_dselect_hwpart(desc, 0); + ret = blk_dselect_hwpart(block, 0); if (IS_ERR_VALUE(ret)) { ret = -ENODEV; goto err_read_fail; @@ -141,59 +158,84 @@ static int __bcb_load(int devnum, const char *partp) part = simple_strtoul(partp, &endp, 0); if (*endp == '\0') { - ret = part_get_info(desc, part, &info); + ret = part_get_info(block, part, partition); if (ret) goto err_read_fail; } else { - part = part_get_info_by_name(desc, partp, &info); + part = part_get_info_by_name(block, partp, partition); if (part < 0) { ret = part; goto err_read_fail; } } - cnt = DIV_ROUND_UP(sizeof(struct bootloader_message), info.blksz); - if (cnt > info.size) + return CMD_RET_SUCCESS; + +err_read_fail: + printf("Error: %d %d:%s read failed (%d)\n", block->uclass_id, + block->devnum, partition->name, ret); + __bcb_reset(); + return CMD_RET_FAILURE; +} + +static int __bcb_load(void) +{ + u64 cnt; + int ret; + + cnt = DIV_ROUND_UP(sizeof(struct bootloader_message), partition->blksz); + if (cnt > partition->size) goto err_too_small; - if (blk_dread(desc, info.start, cnt, &bcb) != cnt) { + if (blk_dread(block, partition->start, cnt, &bcb) != cnt) { ret = -EIO; goto err_read_fail; } - bcb_dev = desc->devnum; - bcb_part = part; - debug("%s: Loaded from mmc %d:%d\n", __func__, bcb_dev, bcb_part); + debug("%s: Loaded from %d %d:%s\n", __func__, block->uclass_id, + block->devnum, partition->name); return CMD_RET_SUCCESS; err_read_fail: - printf("Error: mmc %d:%s read failed (%d)\n", devnum, partp, ret); + printf("Error: %d %d:%s read failed (%d)\n", block->uclass_id, + block->devnum, partition->name, ret); goto err; err_too_small: - printf("Error: mmc %d:%s too small!", devnum, partp); - goto err; + printf("Error: %d %d:%s too small!", block->uclass_id, + block->devnum, partition->name); err: - bcb_dev = -1; - bcb_part = -1; - + __bcb_reset(); return CMD_RET_FAILURE; } static int do_bcb_load(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) { + int ret; + int devnum; char *endp; - int devnum = simple_strtoul(argv[1], &endp, 0); + char *iface = "mmc"; + + if (argc == 4) { + iface = argv[1]; + argc--; + argv++; + } + devnum = simple_strtoul(argv[1], &endp, 0); if (*endp != '\0') { printf("Error: Device id '%s' not a number\n", argv[1]); return CMD_RET_FAILURE; } - return __bcb_load(devnum, argv[2]); + ret = __bcb_initialize(iface, devnum, argv[2]); + if (ret != CMD_RET_SUCCESS) + return ret; + + return __bcb_load(); } -static int __bcb_set(char *fieldp, const char *valp) +static int __bcb_set(const char *fieldp, const char *valp) { int size, len; char *field, *str, *found, *tmp; @@ -293,31 +335,20 @@ static int do_bcb_dump(struct cmd_tbl *cmdtp, int flag, int argc, static int __bcb_store(void) { - struct blk_desc *desc; - struct disk_partition info; u64 cnt; int ret; - desc = blk_get_devnum_by_uclass_id(UCLASS_MMC, bcb_dev); - if (!desc) { - ret = -ENODEV; - goto err; - } - - ret = part_get_info(desc, bcb_part, &info); - if (ret) - goto err; + cnt = DIV_ROUND_UP(sizeof(struct bootloader_message), partition->blksz); - cnt = DIV_ROUND_UP(sizeof(struct bootloader_message), info.blksz); - - if (blk_dwrite(desc, info.start, cnt, &bcb) != cnt) { + if (blk_dwrite(block, partition->start, cnt, &bcb) != cnt) { ret = -EIO; goto err; } return CMD_RET_SUCCESS; err: - printf("Error: mmc %d:%d write failed (%d)\n", bcb_dev, bcb_part, ret); + printf("Error: %d %d:%s write failed (%d)\n", block->uclass_id, + block->devnum, partition->name, ret); return CMD_RET_FAILURE; } @@ -328,23 +359,59 @@ static int do_bcb_store(struct cmd_tbl *cmdtp, int flag, int argc, return __bcb_store(); } -int bcb_write_reboot_reason(int devnum, char *partp, const char *reasonp) +int bcb_find_partition_and_load(const char *iface, int devnum, char *partp) { int ret; - ret = __bcb_load(devnum, partp); - if (ret != CMD_RET_SUCCESS) - return ret; + __bcb_reset(); - ret = __bcb_set("command", reasonp); + ret = __bcb_initialize(iface, devnum, partp); if (ret != CMD_RET_SUCCESS) return ret; - ret = __bcb_store(); - if (ret != CMD_RET_SUCCESS) - return ret; + return __bcb_load(); +} - return 0; +int bcb_load(struct blk_desc *block_description, struct disk_partition *disk_partition) +{ + __bcb_reset(); + + block = block_description; + partition = disk_partition; + + return __bcb_load(); +} + +int bcb_set(enum bcb_field field, const char *value) +{ + if (field > BCB_FIELD_STAGE) + return CMD_RET_FAILURE; + return __bcb_set(fields[field], value); +} + +int bcb_get(enum bcb_field field, char *value_out, size_t value_size) +{ + int size; + char *field_value; + + if (field > BCB_FIELD_STAGE) + return CMD_RET_FAILURE; + if (bcb_field_get(fields[field], &field_value, &size)) + return CMD_RET_FAILURE; + + strlcpy(value_out, field_value, value_size); + + return CMD_RET_SUCCESS; +} + +int bcb_store(void) +{ + return __bcb_store(); +} + +void bcb_reset(void) +{ + __bcb_reset(); } static struct cmd_tbl cmd_bcb_sub[] = { @@ -385,21 +452,23 @@ static int do_bcb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) U_BOOT_CMD( bcb, CONFIG_SYS_MAXARGS, 1, do_bcb, "Load/set/clear/test/dump/store Android BCB fields", - "load <dev> <part> - load BCB from mmc <dev>:<part>\n" - "bcb set <field> <val> - set BCB <field> to <val>\n" - "bcb clear [<field>] - clear BCB <field> or all fields\n" - "bcb test <field> <op> <val> - test BCB <field> against <val>\n" - "bcb dump <field> - dump BCB <field>\n" - "bcb store - store BCB back to mmc\n" + "load <interface> <dev> <part> - load BCB from <interface> <dev>:<part>\n" + "load <dev> <part> - load BCB from mmc <dev>:<part>\n" + "bcb set <field> <val> - set BCB <field> to <val>\n" + "bcb clear [<field>] - clear BCB <field> or all fields\n" + "bcb test <field> <op> <val> - test BCB <field> against <val>\n" + "bcb dump <field> - dump BCB <field>\n" + "bcb store - store BCB back to <interface>\n" "\n" "Legend:\n" - "<dev> - MMC device index containing the BCB partition\n" - "<part> - MMC partition index or name containing the BCB\n" - "<field> - one of {command,status,recovery,stage,reserved}\n" - "<op> - the binary operator used in 'bcb test':\n" - " '=' returns true if <val> matches the string stored in <field>\n" - " '~' returns true if <val> matches a subset of <field>'s string\n" - "<val> - string/text provided as input to bcb {set,test}\n" - " NOTE: any ':' character in <val> will be replaced by line feed\n" - " during 'bcb set' and used as separator by upper layers\n" + "<interface> - storage device interface (virtio, mmc, etc)\n" + "<dev> - storage device index containing the BCB partition\n" + "<part> - partition index or name containing the BCB\n" + "<field> - one of {command,status,recovery,stage,reserved}\n" + "<op> - the binary operator used in 'bcb test':\n" + " '=' returns true if <val> matches the string stored in <field>\n" + " '~' returns true if <val> matches a subset of <field>'s string\n" + "<val> - string/text provided as input to bcb {set,test}\n" + " NOTE: any ':' character in <val> will be replaced by line feed\n" + " during 'bcb set' and used as separator by upper layers\n" ); diff --git a/cmd/bootefi.c b/cmd/bootefi.c index 20e5c94a33a..4d74969ad62 100644 --- a/cmd/bootefi.c +++ b/cmd/bootefi.c @@ -356,6 +356,7 @@ static efi_status_t do_bootefi_exec(efi_handle_t handle, void *load_options) efi_status_t ret; efi_uintn_t exit_data_size = 0; u16 *exit_data = NULL; + struct efi_event *evt; /* On ARM switch from EL3 or secure mode to EL2 or non-secure mode */ switch_to_non_secure_mode(); @@ -394,6 +395,17 @@ out: log_err("Failed to remove loadfile2 for initrd\n"); } + /* Notify EFI_EVENT_GROUP_RETURN_TO_EFIBOOTMGR event group. */ + list_for_each_entry(evt, &efi_events, link) { + if (evt->group && + !guidcmp(evt->group, + &efi_guid_event_group_return_to_efibootmgr)) { + efi_signal_event(evt); + EFI_CALL(systab.boottime->close_event(evt)); + break; + } + } + /* Control is returned to U-Boot, disable EFI watchdog */ efi_set_watchdog(0); diff --git a/cmd/efidebug.c b/cmd/efidebug.c index 201531ac19f..78ef16f4cb5 100644 --- a/cmd/efidebug.c +++ b/cmd/efidebug.c @@ -19,6 +19,7 @@ #include <log.h> #include <malloc.h> #include <mapmem.h> +#include <net.h> #include <part.h> #include <search.h> #include <linux/ctype.h> @@ -708,6 +709,65 @@ out: } /** + * efi_boot_add_uri() - set URI load option + * + * @argc: Number of arguments + * @argv: Argument array + * @var_name16: variable name buffer + * @var_name16_size: variable name buffer size + * @lo: pointer to the load option + * @file_path: buffer to set the generated device path pointer + * @fp_size: file_path size + * Return: CMD_RET_SUCCESS on success, + * CMD_RET_USAGE or CMD_RET_RET_FAILURE on failure + */ +static int efi_boot_add_uri(int argc, char *const argv[], u16 *var_name16, + size_t var_name16_size, struct efi_load_option *lo, + struct efi_device_path **file_path, + efi_uintn_t *fp_size) +{ + int id; + char *pos; + char *endp; + u16 *label; + efi_uintn_t uridp_len; + struct efi_device_path_uri *uridp; + + if (argc < 3 || lo->label) + return CMD_RET_USAGE; + + id = (int)hextoul(argv[1], &endp); + if (*endp != '\0' || id > 0xffff) + return CMD_RET_USAGE; + + label = efi_convert_string(argv[2]); + if (!label) + return CMD_RET_FAILURE; + + if (!wget_validate_uri(argv[3])) { + printf("ERROR: invalid URI\n"); + return CMD_RET_FAILURE; + } + + efi_create_indexed_name(var_name16, var_name16_size, "Boot", id); + lo->label = label; + + uridp_len = sizeof(struct efi_device_path) + strlen(argv[3]) + 1; + uridp = efi_alloc(uridp_len + sizeof(END)); + uridp->dp.type = DEVICE_PATH_TYPE_MESSAGING_DEVICE; + uridp->dp.sub_type = DEVICE_PATH_SUB_TYPE_MSG_URI; + uridp->dp.length = uridp_len; + strcpy(uridp->uri, argv[3]); + pos = (char *)uridp + uridp_len; + memcpy(pos, &END, sizeof(END)); + + *file_path = &uridp->dp; + *fp_size += uridp_len + sizeof(END); + + return CMD_RET_SUCCESS; +} + +/** * do_efi_boot_add() - set UEFI load option * * @cmdtp: Command table @@ -829,6 +889,21 @@ static int do_efi_boot_add(struct cmd_tbl *cmdtp, int flag, argc -= 1; argv += 1; break; + case 'u': + if (IS_ENABLED(CONFIG_EFI_HTTP_BOOT)) { + r = efi_boot_add_uri(argc, argv, var_name16, + sizeof(var_name16), &lo, + &file_path, &fp_size); + if (r != CMD_RET_SUCCESS) + goto out; + fp_free = file_path; + argc -= 3; + argv += 3; + } else{ + r = CMD_RET_USAGE; + goto out; + } + break; default: r = CMD_RET_USAGE; goto out; @@ -1491,6 +1566,9 @@ U_BOOT_LONGHELP(efidebug, " -b|-B <bootid> <label> <interface> <devnum>[:<part>] <file path>\n" " -i|-I <interface> <devnum>[:<part>] <initrd file path>\n" " (-b, -i for short form device path)\n" +#if (IS_ENABLED(CONFIG_EFI_HTTP_BOOT)) + " -u <bootid> <label> <uri>\n" +#endif " -s '<optional data>'\n" "efidebug boot rm <bootid#1> [<bootid#2> [<bootid#3> [...]]]\n" " - delete UEFI BootXXXX variables\n" diff --git a/cmd/nand.c b/cmd/nand.c index 71b8f964429..fe834c4ac5c 100644 --- a/cmd/nand.c +++ b/cmd/nand.c @@ -34,6 +34,7 @@ #include <env.h> #include <watchdog.h> #include <malloc.h> +#include <mapmem.h> #include <asm/byteorder.h> #include <jffs2/jffs2.h> #include <nand.h> @@ -432,7 +433,7 @@ static void nand_print_and_set_info(int idx) env_set_hex("nand_erasesize", mtd->erasesize); } -static int raw_access(struct mtd_info *mtd, ulong addr, loff_t off, +static int raw_access(struct mtd_info *mtd, void *buf, loff_t off, ulong count, int read, int no_verify) { int ret = 0; @@ -440,8 +441,8 @@ static int raw_access(struct mtd_info *mtd, ulong addr, loff_t off, while (count--) { /* Raw access */ mtd_oob_ops_t ops = { - .datbuf = (u8 *)addr, - .oobbuf = ((u8 *)addr) + mtd->writesize, + .datbuf = buf, + .oobbuf = buf + mtd->writesize, .len = mtd->writesize, .ooblen = mtd->oobsize, .mode = MTD_OPS_RAW @@ -461,7 +462,7 @@ static int raw_access(struct mtd_info *mtd, ulong addr, loff_t off, break; } - addr += mtd->writesize + mtd->oobsize; + buf += mtd->writesize + mtd->oobsize; off += mtd->writesize; } @@ -675,6 +676,7 @@ static int do_nand(struct cmd_tbl *cmdtp, int flag, int argc, int read; int raw = 0; int no_verify = 0; + void *buf; if (argc < 4) goto usage; @@ -730,32 +732,32 @@ static int do_nand(struct cmd_tbl *cmdtp, int flag, int argc, } mtd = get_nand_dev_by_index(dev); + buf = map_sysmem(addr, maxsize); if (!s || !strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i")) { if (read) ret = nand_read_skip_bad(mtd, off, &rwsize, - NULL, maxsize, - (u_char *)addr); + NULL, maxsize, buf); else ret = nand_write_skip_bad(mtd, off, &rwsize, - NULL, maxsize, - (u_char *)addr, + NULL, maxsize, buf, WITH_WR_VERIFY); #ifdef CONFIG_CMD_NAND_TRIMFFS } else if (!strcmp(s, ".trimffs")) { if (read) { printf("Unknown nand command suffix '%s'\n", s); + unmap_sysmem(buf); return 1; } ret = nand_write_skip_bad(mtd, off, &rwsize, NULL, - maxsize, (u_char *)addr, + maxsize, buf, WITH_DROP_FFS | WITH_WR_VERIFY); #endif } else if (!strcmp(s, ".oob")) { /* out-of-band data */ mtd_oob_ops_t ops = { - .oobbuf = (u8 *)addr, + .oobbuf = buf, .ooblen = rwsize, .mode = MTD_OPS_RAW }; @@ -765,13 +767,15 @@ static int do_nand(struct cmd_tbl *cmdtp, int flag, int argc, else ret = mtd_write_oob(mtd, off, &ops); } else if (raw) { - ret = raw_access(mtd, addr, off, pagecount, read, + ret = raw_access(mtd, buf, off, pagecount, read, no_verify); } else { printf("Unknown nand command suffix '%s'.\n", s); + unmap_sysmem(buf); return 1; } + unmap_sysmem(buf); printf(" %zu bytes %s: %s\n", rwsize, read ? "read" : "written", ret ? "ERROR" : "OK"); diff --git a/cmd/nvedit.c b/cmd/nvedit.c index daf1ad37f9b..e77338f8139 100644 --- a/cmd/nvedit.c +++ b/cmd/nvedit.c @@ -49,20 +49,6 @@ DECLARE_GLOBAL_DATA_PTR; */ #define MAX_ENV_SIZE (1 << 20) /* 1 MiB */ -/* - * This variable is incremented on each do_env_set(), so it can - * be used via env_get_id() as an indication, if the environment - * has changed or not. So it is possible to reread an environment - * variable only if the environment was changed ... done so for - * example in NetInitLoop() - */ -static int env_id = 1; - -int env_get_id(void) -{ - return env_id; -} - #ifndef CONFIG_SPL_BUILD /* * Command interface: print one or all environment variables @@ -198,104 +184,6 @@ DONE: #endif #endif /* CONFIG_SPL_BUILD */ -/* - * Set a new environment variable, - * or replace or delete an existing one. - */ -static int _do_env_set(int flag, int argc, char *const argv[], int env_flag) -{ - int i, len; - char *name, *value, *s; - struct env_entry e, *ep; - - debug("Initial value for argc=%d\n", argc); - -#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_CMD_NVEDIT_EFI) - if (argc > 1 && argv[1][0] == '-' && argv[1][1] == 'e') - return do_env_set_efi(NULL, flag, --argc, ++argv); -#endif - - while (argc > 1 && **(argv + 1) == '-') { - char *arg = *++argv; - - --argc; - while (*++arg) { - switch (*arg) { - case 'f': /* force */ - env_flag |= H_FORCE; - break; - default: - return CMD_RET_USAGE; - } - } - } - debug("Final value for argc=%d\n", argc); - name = argv[1]; - - if (strchr(name, '=')) { - printf("## Error: illegal character '='" - "in variable name \"%s\"\n", name); - return 1; - } - - env_id++; - - /* Delete only ? */ - if (argc < 3 || argv[2] == NULL) { - int rc = hdelete_r(name, &env_htab, env_flag); - - /* If the variable didn't exist, don't report an error */ - return rc && rc != -ENOENT ? 1 : 0; - } - - /* - * Insert / replace new value - */ - for (i = 2, len = 0; i < argc; ++i) - len += strlen(argv[i]) + 1; - - value = malloc(len); - if (value == NULL) { - printf("## Can't malloc %d bytes\n", len); - return 1; - } - for (i = 2, s = value; i < argc; ++i) { - char *v = argv[i]; - - while ((*s++ = *v++) != '\0') - ; - *(s - 1) = ' '; - } - if (s != value) - *--s = '\0'; - - e.key = name; - e.data = value; - hsearch_r(e, ENV_ENTER, &ep, &env_htab, env_flag); - free(value); - if (!ep) { - printf("## Error inserting \"%s\" variable, errno=%d\n", - name, errno); - return 1; - } - - return 0; -} - -int env_set(const char *varname, const char *varvalue) -{ - const char * const argv[4] = { "setenv", varname, varvalue, NULL }; - - /* before import into hashtable */ - if (!(gd->flags & GD_FLG_ENV_READY)) - return 1; - - if (varvalue == NULL || varvalue[0] == '\0') - return _do_env_set(0, 2, (char * const *)argv, H_PROGRAMMATIC); - else - return _do_env_set(0, 3, (char * const *)argv, H_PROGRAMMATIC); -} - #ifndef CONFIG_SPL_BUILD static int do_env_set(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) @@ -303,7 +191,7 @@ static int do_env_set(struct cmd_tbl *cmdtp, int flag, int argc, if (argc < 2) return CMD_RET_USAGE; - return _do_env_set(flag, argc, argv, H_INTERACTIVE); + return env_do_env_set(flag, argc, argv, H_INTERACTIVE); } /* @@ -381,7 +269,7 @@ int do_env_ask(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) } /* Continue calling setenv code */ - return _do_env_set(flag, len, local_args, H_INTERACTIVE); + return env_do_env_set(flag, len, local_args, H_INTERACTIVE); } #endif @@ -561,12 +449,12 @@ static int do_env_edit(struct cmd_tbl *cmdtp, int flag, int argc, if (buffer[0] == '\0') { const char * const _argv[3] = { "setenv", argv[1], NULL }; - return _do_env_set(0, 2, (char * const *)_argv, H_INTERACTIVE); + return env_do_env_set(0, 2, (char * const *)_argv, H_INTERACTIVE); } else { const char * const _argv[4] = { "setenv", argv[1], buffer, NULL }; - return _do_env_set(0, 3, (char * const *)_argv, H_INTERACTIVE); + return env_do_env_set(0, 3, (char * const *)_argv, H_INTERACTIVE); } } #endif /* CONFIG_CMD_EDITENV */ @@ -679,7 +567,7 @@ static int do_env_delete(struct cmd_tbl *cmdtp, int flag, } debug("Final value for argc=%d\n", argc); - env_id++; + env_inc_id(); while (--argc > 0) { char *name = *++argv; diff --git a/cmd/scsi.c b/cmd/scsi.c index 4549995ba73..c501d7f456d 100644 --- a/cmd/scsi.c +++ b/cmd/scsi.c @@ -34,9 +34,6 @@ static int do_scsi(struct cmd_tbl *cmdtp, int flag, int argc, if (argc == 2) { if (strncmp(argv[1], "res", 3) == 0) { printf("\nReset SCSI\n"); -#ifndef CONFIG_DM_SCSI - scsi_bus_reset(NULL); -#endif ret = scsi_scan(true); if (ret) return CMD_RET_FAILURE; diff --git a/cmd/version.c b/cmd/version.c index 87e1fa4159c..d99a44f19fb 100644 --- a/cmd/version.c +++ b/cmd/version.c @@ -7,21 +7,12 @@ #include <common.h> #include <command.h> #include <display_options.h> -#include <timestamp.h> -#include <version.h> #include <version_string.h> #include <linux/compiler.h> #ifdef CONFIG_SYS_COREBOOT #include <asm/cb_sysinfo.h> #endif -#define U_BOOT_VERSION_STRING U_BOOT_VERSION " (" U_BOOT_DATE " - " \ - U_BOOT_TIME " " U_BOOT_TZ ")" CONFIG_IDENT_STRING - -const char version_string[] = U_BOOT_VERSION_STRING; -const unsigned short version_num = U_BOOT_VERSION_NUM; -const unsigned char version_num_patch = U_BOOT_VERSION_NUM_PATCH; - static int do_version(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/common/Kconfig b/common/Kconfig index 0f548195197..0283701f1d0 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -52,6 +52,29 @@ config CONSOLE_RECORD_IN_SIZE The buffer is allocated immediately after the malloc() region is ready. +config SYS_CBSIZE + int "Console input buffer size" + default 2048 if ARCH_TEGRA || ARCH_VERSAL || ARCH_ZYNQ || ARCH_ZYNQMP || \ + RCAR_GEN3 || TARGET_SOCFPGA_SOC64 + default 512 if ARCH_MX5 || ARCH_MX6 || ARCH_MX7 || FSL_LSCH2 || \ + FSL_LSCH3 || X86 + default 256 if M68K || PPC + default 1024 + help + Set the size of the console input buffer. This is used both in the + case of reading input literally from the user in some manner as well + as when we need to construct or modify that type of input, for + example when constructing "bootargs" for the OS. + +config SYS_PBSIZE + int "Console output buffer size" + default 1024 if ARCH_SUNXI + default 1044 + help + Set the size of the console output buffer. This is used when we need + to work with some form of a buffer while providing output in some + form to the user. + config DISABLE_CONSOLE bool "Add functionality to disable console completely" help diff --git a/common/Makefile b/common/Makefile index cdeadf72026..1495436d5d4 100644 --- a/common/Makefile +++ b/common/Makefile @@ -8,8 +8,10 @@ ifndef CONFIG_SPL_BUILD obj-y += init/ obj-y += main.o obj-y += exports.o +obj-y += cli_getch.o cli_simple.o cli_readline.o obj-$(CONFIG_HUSH_PARSER) += cli_hush.o obj-$(CONFIG_AUTOBOOT) += autoboot.o +obj-y += version.o # # boards obj-y += board_f.o @@ -37,7 +39,6 @@ obj-$(CONFIG_SPLASH_SOURCE) += splash_source.o obj-$(CONFIG_MENU) += menu.o obj-$(CONFIG_UPDATE_COMMON) += update.o obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o -obj-$(CONFIG_CMDLINE) += cli_getch.o cli_readline.o cli_simple.o endif # !CONFIG_SPL_BUILD diff --git a/common/board_r.c b/common/board_r.c index a7967849dc0..da0b80f24ff 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -472,17 +472,6 @@ static int initr_status_led(void) } #endif -#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI) -static int initr_scsi(void) -{ - puts("SCSI: "); - scsi_init(); - puts("\n"); - - return 0; -} -#endif - #ifdef CONFIG_CMD_NET static int initr_net(void) { @@ -732,10 +721,6 @@ static init_fnc_t init_sequence_r[] = { #ifdef CONFIG_BOARD_LATE_INIT board_late_init, #endif -#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI) - INIT_FUNC_WATCHDOG_RESET - initr_scsi, -#endif #ifdef CONFIG_BITBANGMII bb_miiphy_init, #endif diff --git a/common/cli_simple.c b/common/cli_simple.c index e80ba488a5e..f89ba92d1b0 100644 --- a/common/cli_simple.c +++ b/common/cli_simple.c @@ -22,44 +22,6 @@ #define debug_parser(fmt, args...) \ debug_cond(DEBUG_PARSER, fmt, ##args) - -int cli_simple_parse_line(char *line, char *argv[]) -{ - int nargs = 0; - - debug_parser("%s: \"%s\"\n", __func__, line); - while (nargs < CONFIG_SYS_MAXARGS) { - /* skip any white space */ - while (isblank(*line)) - ++line; - - if (*line == '\0') { /* end of line, no more args */ - argv[nargs] = NULL; - debug_parser("%s: nargs=%d\n", __func__, nargs); - return nargs; - } - - argv[nargs++] = line; /* begin of argument string */ - - /* find end of string */ - while (*line && !isblank(*line)) - ++line; - - if (*line == '\0') { /* end of line, no more args */ - argv[nargs] = NULL; - debug_parser("parse_line: nargs=%d\n", nargs); - return nargs; - } - - *line++ = '\0'; /* terminate current arg */ - } - - printf("** Too many args (max. %d) **\n", CONFIG_SYS_MAXARGS); - - debug_parser("%s: nargs=%d\n", __func__, nargs); - return nargs; -} - int cli_simple_process_macros(const char *input, char *output, int max_size) { char c, prev; @@ -172,6 +134,44 @@ int cli_simple_process_macros(const char *input, char *output, int max_size) return ret; } +#ifdef CONFIG_CMDLINE +int cli_simple_parse_line(char *line, char *argv[]) +{ + int nargs = 0; + + debug_parser("%s: \"%s\"\n", __func__, line); + while (nargs < CONFIG_SYS_MAXARGS) { + /* skip any white space */ + while (isblank(*line)) + ++line; + + if (*line == '\0') { /* end of line, no more args */ + argv[nargs] = NULL; + debug_parser("%s: nargs=%d\n", __func__, nargs); + return nargs; + } + + argv[nargs++] = line; /* begin of argument string */ + + /* find end of string */ + while (*line && !isblank(*line)) + ++line; + + if (*line == '\0') { /* end of line, no more args */ + argv[nargs] = NULL; + debug_parser("parse_line: nargs=%d\n", nargs); + return nargs; + } + + *line++ = '\0'; /* terminate current arg */ + } + + printf("** Too many args (max. %d) **\n", CONFIG_SYS_MAXARGS); + + debug_parser("%s: nargs=%d\n", __func__, nargs); + return nargs; +} + /* * WARNING: * @@ -346,3 +346,4 @@ int cli_simple_run_command_list(char *cmd, int flag) return rcode; } +#endif diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 25cd18afda7..fc284a5bffc 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -183,6 +183,7 @@ config SPL_SYS_REPORT_STACK_F_USAGE config SPL_SHOW_ERRORS bool "Show more information when something goes wrong" + depends on SPL_LIBCOMMON_SUPPORT help This enabled more verbose error messages and checking when something goes wrong in SPL. For example, it shows the error code when U-Boot @@ -279,8 +280,15 @@ config SPL_BOARD_INIT spl_board_init() from board_init_r(). This function should be provided by the board. +config SPL_LOAD_BLOCK + bool + help + Support loading images from block devices. This adds a bl_len member + to struct spl_load_info. + config SPL_BOOTROM_SUPPORT bool "Support returning to the BOOTROM" + select SPL_LOAD_BLOCK if MACH_IMX help Some platforms (e.g. the Rockchip RK3368) provide support in their ROM for loading the next boot-stage after performing basic setup @@ -473,6 +481,11 @@ config SPL_DISPLAY_PRINT banner ("U-Boot SPL ..."). This function should be provided by the board. +config SPL_SYS_MMCSD_RAW_MODE + bool + help + Support booting from an MMC without a filesystem. + config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR bool "MMC raw mode: by sector" default y if ARCH_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER || \ @@ -481,6 +494,8 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \ OMAP44XX || OMAP54XX || AM33XX || AM43XX || \ TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED + select SPL_LOAD_BLOCK if SPL_MMC + select SPL_SYS_MMCSD_RAW_MODE if SPL_MMC help Use sector number for specifying U-Boot location on MMC/SD in raw mode. @@ -517,6 +532,8 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION bool "MMC Raw mode: by partition" + select SPL_LOAD_BLOCK if SPL_MMC + select SPL_SYS_MMCSD_RAW_MODE if SPL_MMC help Use a partition for loading U-Boot when using MMC/SD in raw mode. @@ -683,6 +700,22 @@ config SPL_FS_FAT filesystem from within SPL. Support for the underlying block device (e.g. MMC or USB) must be enabled separately. +config SPL_FS_FAT_DMA_ALIGN + bool "Use DMA-aligned buffers with FAT" + depends on SPL_FS_FAT + select SPL_LOAD_BLOCK + default y if SPL_LOAD_FIT + help + The FAT filesystem driver tries to ensure that the reads it issues to + the block subsystem use DMA-aligned buffers. If the supplied buffer is + not DMA-aligned, the FAT driver will use a bounce-buffer and read + block-by-block. This is separate from the bounce-buffer used by the + block subsystem (CONFIG_BOUNCE_BUFFER). + + Enable this config to align buffers passed to the FAT filesystem + driver. This will speed up reads, but will increase the size of U-Boot + by around 60 bytes. + config SPL_FS_LOAD_PAYLOAD_NAME string "File to load for U-Boot from the filesystem" depends on SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS || SPL_SEMIHOSTING @@ -857,7 +890,7 @@ config SPL_MPC8XXX_INIT_DDR allows DRAM to be set up before loading U-Boot into that DRAM, where it can run. -config SPL_MTD_SUPPORT +config SPL_MTD bool "Support MTD drivers" help Enable support for MTD (Memory Technology Device) within SPL. MTD @@ -876,6 +909,7 @@ config SPL_MUSB_NEW config SPL_NAND_SUPPORT bool "Support NAND flash" + select SPL_LOAD_BLOCK help Enable support for NAND (Negative AND) flash in SPL. NAND flash can be used to allow SPL to load U-Boot from supported devices. @@ -1101,6 +1135,8 @@ config SYS_OS_BASE config SPL_FALCON_BOOT_MMCSD bool "Enable Falcon boot from MMC or SD media" depends on SPL_OS_BOOT && SPL_MMC + select SPL_LOAD_BLOCK + select SPL_SYS_MMCSD_RAW_MODE help Select this if the Falcon mode OS image mode is on MMC or SD media. @@ -1259,7 +1295,6 @@ config SPL_SATA_RAW_U_BOOT_SECTOR config SPL_NVME bool "NVM Express device support" depends on BLK - select HAVE_BLOCK_DEVICE select FS_LOADER select SPL_BLK_FS help diff --git a/common/spl/spl.c b/common/spl/spl.c index 732d90d39e6..3ce5bfeec8b 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -19,6 +19,7 @@ #include <mapmem.h> #include <serial.h> #include <spl.h> +#include <spl_load.h> #include <system-constants.h> #include <asm/global_data.h> #include <asm-generic/gpio.h> @@ -352,6 +353,15 @@ int spl_parse_image_header(struct spl_image_info *spl_image, return 0; } +#if SPL_LOAD_USERS > 1 +int spl_load(struct spl_image_info *spl_image, + const struct spl_boot_device *bootdev, struct spl_load_info *info, + size_t size, size_t offset) +{ + return _spl_load(spl_image, bootdev, info, size, offset); +} +#endif + __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { typedef void __noreturn (*image_entry_noargs_t)(void); @@ -718,8 +728,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) ret = boot_from_devices(&spl_image, spl_boot_list, ARRAY_SIZE(spl_boot_list)); if (ret) { - if (CONFIG_IS_ENABLED(SHOW_ERRORS) && - CONFIG_IS_ENABLED(LIBCOMMON_SUPPORT)) + if (CONFIG_IS_ENABLED(SHOW_ERRORS)) printf(SPL_TPL_PROMPT "failed to boot from all boot devices (err=%d)\n", ret); else diff --git a/common/spl/spl_blk_fs.c b/common/spl/spl_blk_fs.c index 63825d620d1..04eac6f306b 100644 --- a/common/spl/spl_blk_fs.c +++ b/common/spl/spl_blk_fs.c @@ -7,12 +7,15 @@ #include <common.h> #include <spl.h> +#include <spl_load.h> #include <image.h> #include <fs.h> +#include <asm/cache.h> #include <asm/io.h> struct blk_dev { const char *ifname; + const char *filename; char dev_part_str[8]; }; @@ -30,11 +33,11 @@ static ulong spl_fit_read(struct spl_load_info *load, ulong file_offset, return ret; } - ret = fs_read(load->filename, virt_to_phys(buf), file_offset, size, + ret = fs_read(dev->filename, virt_to_phys(buf), file_offset, size, &actlen); if (ret < 0) { printf("spl: error reading image %s. Err - %d\n", - load->filename, ret); + dev->filename, ret); return ret; } @@ -46,10 +49,10 @@ int spl_blk_load_image(struct spl_image_info *spl_image, enum uclass_id uclass_id, int devnum, int partnum) { const char *filename = CONFIG_SPL_FS_LOAD_PAYLOAD_NAME; - struct legacy_img_hdr *header; struct blk_desc *blk_desc; - loff_t actlen, filesize; + loff_t filesize; struct blk_dev dev; + struct spl_load_info load; int ret; blk_desc = blk_get_devnum_by_uclass_id(uclass_id, devnum); @@ -59,8 +62,8 @@ int spl_blk_load_image(struct spl_image_info *spl_image, } blk_show_device(uclass_id, devnum); - header = spl_get_load_buffer(-sizeof(*header), sizeof(*header)); + dev.filename = filename; dev.ifname = blk_get_uclass_name(uclass_id); snprintf(dev.dev_part_str, sizeof(dev.dev_part_str) - 1, "%x:%x", devnum, partnum); @@ -68,63 +71,21 @@ int spl_blk_load_image(struct spl_image_info *spl_image, if (ret) { printf("spl: unable to set blk_dev %s %s. Err - %d\n", dev.ifname, dev.dev_part_str, ret); - goto out; - } - - ret = fs_read(filename, virt_to_phys(header), 0, - sizeof(struct legacy_img_hdr), &actlen); - if (ret) { - printf("spl: unable to read file %s. Err - %d\n", filename, - ret); - goto out; - } - - if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) && - image_get_magic(header) == FDT_MAGIC) { - struct spl_load_info load; - - debug("Found FIT\n"); - load.read = spl_fit_read; - load.bl_len = 1; - load.filename = (void *)filename; - load.priv = &dev; - - return spl_load_simple_fit(spl_image, &load, 0, header); - } - - ret = spl_parse_image_header(spl_image, bootdev, header); - if (ret) { - printf("spl: unable to parse image header. Err - %d\n", - ret); - goto out; - } - - ret = fs_set_blk_dev(dev.ifname, dev.dev_part_str, FS_TYPE_ANY); - if (ret) { - printf("spl: unable to set blk_dev %s %s. Err - %d\n", - dev.ifname, dev.dev_part_str, ret); - goto out; + return ret; } ret = fs_size(filename, &filesize); if (ret) { printf("spl: unable to get file size: %s. Err - %d\n", filename, ret); - goto out; - } - - ret = fs_set_blk_dev(dev.ifname, dev.dev_part_str, FS_TYPE_ANY); - if (ret) { - printf("spl: unable to set blk_dev %s %s. Err - %d\n", - dev.ifname, dev.dev_part_str, ret); - goto out; + return ret; } - ret = fs_read(filename, (ulong)spl_image->load_addr, 0, filesize, - &actlen); - if (ret) - printf("spl: unable to read file %s. Err - %d\n", - filename, ret); -out: - return ret; + load.read = spl_fit_read; + if (IS_ENABLED(CONFIG_SPL_FS_FAT_DMA_ALIGN)) + spl_set_bl_len(&load, ARCH_DMA_MINALIGN); + else + spl_set_bl_len(&load, 1); + load.priv = &dev; + return spl_load(spl_image, bootdev, &load, filesize, 0); } diff --git a/common/spl/spl_ext.c b/common/spl/spl_ext.c index af836ca15b8..2be6f04b02c 100644 --- a/common/spl/spl_ext.c +++ b/common/spl/spl_ext.c @@ -2,25 +2,35 @@ #include <common.h> #include <env.h> -#include <mapmem.h> #include <part.h> #include <spl.h> +#include <spl_load.h> #include <asm/u-boot.h> #include <ext4fs.h> #include <errno.h> #include <image.h> +static ulong spl_fit_read(struct spl_load_info *load, ulong file_offset, + ulong size, void *buf) +{ + int ret; + loff_t actlen; + + ret = ext4fs_read(buf, file_offset, size, &actlen); + if (ret) + return ret; + return actlen; +} + int spl_load_image_ext(struct spl_image_info *spl_image, struct spl_boot_device *bootdev, struct blk_desc *block_dev, int partition, const char *filename) { s32 err; - struct legacy_img_hdr *header; - loff_t filelen, actlen; + loff_t filelen; struct disk_partition part_info = {}; - - header = spl_get_load_buffer(-sizeof(*header), sizeof(*header)); + struct spl_load_info load; if (part_get_info(block_dev, partition, &part_info)) { printf("spl: no partition table found\n"); @@ -29,7 +39,7 @@ int spl_load_image_ext(struct spl_image_info *spl_image, ext4fs_set_blk_dev(block_dev, &part_info); - err = ext4fs_mount(part_info.size); + err = ext4fs_mount(); if (!err) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("%s: ext4fs mount err - %d\n", __func__, err); @@ -42,20 +52,10 @@ int spl_load_image_ext(struct spl_image_info *spl_image, puts("spl: ext4fs_open failed\n"); goto end; } - err = ext4fs_read((char *)header, 0, sizeof(struct legacy_img_hdr), &actlen); - if (err < 0) { - puts("spl: ext4fs_read failed\n"); - goto end; - } - - err = spl_parse_image_header(spl_image, bootdev, header); - if (err < 0) { - puts("spl: ext: failed to parse image header\n"); - goto end; - } - err = ext4fs_read(map_sysmem(spl_image->load_addr, filelen), 0, filelen, - &actlen); + spl_set_bl_len(&load, 1); + load.read = spl_fit_read; + err = spl_load(spl_image, bootdev, &load, filelen, 0); end: #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT @@ -84,7 +84,7 @@ int spl_load_image_ext_os(struct spl_image_info *spl_image, ext4fs_set_blk_dev(block_dev, &part_info); - err = ext4fs_mount(part_info.size); + err = ext4fs_mount(); if (!err) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("%s: ext4fs mount err - %d\n", __func__, err); diff --git a/common/spl/spl_fat.c b/common/spl/spl_fat.c index 014074f85be..a52f9e178e6 100644 --- a/common/spl/spl_fat.c +++ b/common/spl/spl_fat.c @@ -11,8 +11,8 @@ #include <common.h> #include <env.h> #include <log.h> -#include <mapmem.h> #include <spl.h> +#include <spl_load.h> #include <asm/u-boot.h> #include <fat.h> #include <errno.h> @@ -51,7 +51,7 @@ static ulong spl_fit_read(struct spl_load_info *load, ulong file_offset, { loff_t actread; int ret; - char *filename = (char *)load->filename; + char *filename = load->priv; ret = fat_read_file(filename, buf, file_offset, size, &actread); if (ret) @@ -66,59 +66,41 @@ int spl_load_image_fat(struct spl_image_info *spl_image, const char *filename) { int err; - struct legacy_img_hdr *header; + loff_t size; + struct spl_load_info load; err = spl_register_fat_device(block_dev, partition); if (err) goto end; - header = spl_get_load_buffer(-sizeof(*header), sizeof(*header)); - - err = file_fat_read(filename, header, sizeof(struct legacy_img_hdr)); - if (err <= 0) - goto end; - - if (IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL) && - image_get_magic(header) == FDT_MAGIC) { - err = file_fat_read(filename, - map_sysmem(CONFIG_SYS_LOAD_ADDR, 0), 0); - if (err <= 0) - goto end; - err = spl_parse_image_header(spl_image, bootdev, - map_sysmem(CONFIG_SYS_LOAD_ADDR, - err)); - if (err == -EAGAIN) - return err; - if (err == 0) - err = 1; - } else if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) && - image_get_magic(header) == FDT_MAGIC) { - struct spl_load_info load; - - debug("Found FIT\n"); - load.read = spl_fit_read; - load.bl_len = 1; - load.filename = (void *)filename; - load.priv = NULL; - - return spl_load_simple_fit(spl_image, &load, 0, header); - } else { - err = spl_parse_image_header(spl_image, bootdev, header); + /* + * Avoid pulling in this function for other image types since we are + * very short on space on some boards. + */ + if (IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL)) { + err = fat_size(filename, &size); if (err) goto end; - - err = file_fat_read(filename, map_sysmem(spl_image->load_addr, - spl_image->size), 0); + } else { + size = 0; } + load.read = spl_fit_read; + if (IS_ENABLED(CONFIG_SPL_FS_FAT_DMA_ALIGN)) + spl_set_bl_len(&load, ARCH_DMA_MINALIGN); + else + spl_set_bl_len(&load, 1); + load.priv = (void *)filename; + err = spl_load(spl_image, bootdev, &load, size, 0); + end: #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - if (err <= 0) + if (err < 0) printf("%s: error reading image %s, err - %d\n", __func__, filename, err); #endif - return (err <= 0); + return err; } #if CONFIG_IS_ENABLED(OS_BOOT) diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index 70d8d5942d9..872df0c0fe8 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -14,7 +14,6 @@ #include <mapmem.h> #include <spl.h> #include <sysinfo.h> -#include <asm/cache.h> #include <asm/global_data.h> #include <asm/io.h> #include <linux/libfdt.h> @@ -172,29 +171,12 @@ static int spl_fit_get_image_node(const struct spl_fit_info *ctx, static int get_aligned_image_offset(struct spl_load_info *info, int offset) { - /* - * If it is a FS read, get the first address before offset which is - * aligned to ARCH_DMA_MINALIGN. If it is raw read return the - * block number to which offset belongs. - */ - if (info->filename) - return offset & ~(ARCH_DMA_MINALIGN - 1); - - return offset / info->bl_len; + return ALIGN_DOWN(offset, spl_get_bl_len(info)); } static int get_aligned_image_overhead(struct spl_load_info *info, int offset) { - /* - * If it is a FS read, get the difference between the offset and - * the first address before offset which is aligned to - * ARCH_DMA_MINALIGN. If it is raw read return the offset within the - * block. - */ - if (info->filename) - return offset & (ARCH_DMA_MINALIGN - 1); - - return offset % info->bl_len; + return offset & (spl_get_bl_len(info) - 1); } static int get_aligned_image_size(struct spl_load_info *info, int data_size, @@ -202,10 +184,7 @@ static int get_aligned_image_size(struct spl_load_info *info, int data_size, { data_size = data_size + get_aligned_image_overhead(info, offset); - if (info->filename) - return data_size; - - return (data_size + info->bl_len - 1) / info->bl_len; + return ALIGN(data_size, spl_get_bl_len(info)); } /** @@ -222,7 +201,7 @@ static int get_aligned_image_size(struct spl_load_info *info, int data_size, * * Return: 0 on success or a negative error number. */ -static int load_simple_fit(struct spl_load_info *info, ulong sector, +static int load_simple_fit(struct spl_load_info *info, ulong fit_offset, const struct spl_fit_info *ctx, int node, struct spl_image_info *image_info) { @@ -234,7 +213,6 @@ static int load_simple_fit(struct spl_load_info *info, ulong sector, void *load_ptr; void *src; ulong overhead; - int nr_sectors; uint8_t image_comp = -1, type = -1; const void *data; const void *fit = ctx->fit; @@ -291,11 +269,12 @@ static int load_simple_fit(struct spl_load_info *info, ulong sector, length = len; overhead = get_aligned_image_overhead(info, offset); - nr_sectors = get_aligned_image_size(info, length, offset); + size = get_aligned_image_size(info, length, offset); if (info->read(info, - sector + get_aligned_image_offset(info, offset), - nr_sectors, src_ptr) != nr_sectors) + fit_offset + + get_aligned_image_offset(info, offset), size, + src_ptr) < length) return -EIO; debug("External data: dst=%p, offset=%x, size=%lx\n", @@ -380,7 +359,7 @@ __weak int board_spl_fit_append_fdt_skip(const char *name) } static int spl_fit_append_fdt(struct spl_image_info *spl_image, - struct spl_load_info *info, ulong sector, + struct spl_load_info *info, ulong offset, const struct spl_fit_info *ctx) { struct spl_image_info image_info; @@ -414,7 +393,7 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, spl_image->fdt_addr = map_sysmem(image_info.load_addr, size); memcpy(spl_image->fdt_addr, gd->fdt_blob, size); } else { - ret = load_simple_fit(info, sector, ctx, node, &image_info); + ret = load_simple_fit(info, offset, ctx, node, &image_info); if (ret < 0) return ret; @@ -465,7 +444,7 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, __func__); } image_info.load_addr = (ulong)tmpbuffer; - ret = load_simple_fit(info, sector, ctx, node, + ret = load_simple_fit(info, offset, ctx, node, &image_info); if (ret < 0) break; @@ -642,7 +621,7 @@ static int spl_fit_upload_fpga(struct spl_fit_info *ctx, int node, } static int spl_fit_load_fpga(struct spl_fit_info *ctx, - struct spl_load_info *info, ulong sector) + struct spl_load_info *info, ulong offset) { int node, ret; @@ -657,7 +636,7 @@ static int spl_fit_load_fpga(struct spl_fit_info *ctx, warn_deprecated("'fpga' property in config node. Use 'loadables'"); /* Load the image and set up the fpga_image structure */ - ret = load_simple_fit(info, sector, ctx, node, &fpga_image); + ret = load_simple_fit(info, offset, ctx, node, &fpga_image); if (ret) { printf("%s: Cannot load the FPGA: %i\n", __func__, ret); return ret; @@ -667,11 +646,10 @@ static int spl_fit_load_fpga(struct spl_fit_info *ctx, } static int spl_simple_fit_read(struct spl_fit_info *ctx, - struct spl_load_info *info, ulong sector, + struct spl_load_info *info, ulong offset, const void *fit_header) { unsigned long count, size; - int sectors; void *buf; /* @@ -690,13 +668,13 @@ static int spl_simple_fit_read(struct spl_fit_info *ctx, * For FIT with data embedded, data is loaded as part of FIT image. * For FIT with external data, data is not loaded in this step. */ - sectors = get_aligned_image_size(info, size, 0); - buf = board_spl_fit_buffer_addr(size, sectors, info->bl_len); + size = get_aligned_image_size(info, size, 0); + buf = board_spl_fit_buffer_addr(size, size, 1); - count = info->read(info, sector, sectors, buf); + count = info->read(info, offset, size, buf); ctx->fit = buf; - debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu, size=0x%lx\n", - sector, sectors, buf, count, size); + debug("fit read offset %lx, size=%lu, dst=%p, count=%lu\n", + offset, size, buf, count); return (count == 0) ? -EIO : 0; } @@ -728,7 +706,7 @@ static int spl_simple_fit_parse(struct spl_fit_info *ctx) } int spl_load_simple_fit(struct spl_image_info *spl_image, - struct spl_load_info *info, ulong sector, void *fit) + struct spl_load_info *info, ulong offset, void *fit) { struct spl_image_info image_info; struct spl_fit_info ctx; @@ -737,7 +715,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, int index = 0; int firmware_node; - ret = spl_simple_fit_read(&ctx, info, sector, fit); + ret = spl_simple_fit_read(&ctx, info, offset, fit); if (ret < 0) return ret; @@ -752,7 +730,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, return ret; if (IS_ENABLED(CONFIG_SPL_FPGA)) - spl_fit_load_fpga(&ctx, info, sector); + spl_fit_load_fpga(&ctx, info, offset); /* * Find the U-Boot image using the following search order: @@ -782,7 +760,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, } /* Load the image and set up the spl_image structure */ - ret = load_simple_fit(info, sector, &ctx, node, spl_image); + ret = load_simple_fit(info, offset, &ctx, node, spl_image); if (ret) return ret; @@ -800,7 +778,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, * We allow this to fail, as the U-Boot image might embed its FDT. */ if (os_takes_devicetree(spl_image->os)) { - ret = spl_fit_append_fdt(spl_image, info, sector, &ctx); + ret = spl_fit_append_fdt(spl_image, info, offset, &ctx); if (ret < 0 && spl_image->os != IH_OS_U_BOOT) return ret; } @@ -823,7 +801,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, continue; image_info.load_addr = 0; - ret = load_simple_fit(info, sector, &ctx, node, &image_info); + ret = load_simple_fit(info, offset, &ctx, node, &image_info); if (ret < 0) { printf("%s: can't load image loadables index %d (ret = %d)\n", __func__, index, ret); @@ -837,7 +815,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, debug("Loadable is %s\n", genimg_get_os_name(os_type)); if (os_takes_devicetree(os_type)) { - spl_fit_append_fdt(&image_info, info, sector, &ctx); + spl_fit_append_fdt(&image_info, info, offset, &ctx); spl_image->fdt_addr = image_info.fdt_addr; } diff --git a/common/spl/spl_imx_container.c b/common/spl/spl_imx_container.c index 127802f5cb7..b4ea9241d68 100644 --- a/common/spl/spl_imx_container.c +++ b/common/spl/spl_imx_container.c @@ -19,11 +19,10 @@ static struct boot_img_t *read_auth_image(struct spl_image_info *spl_image, struct spl_load_info *info, struct container_hdr *container, int image_index, - u32 container_sector) + ulong container_offset) { struct boot_img_t *images; - ulong sector; - u32 sectors; + ulong offset, overhead, size; if (image_index > container->num_images) { debug("Invalid image number\n"); @@ -33,22 +32,21 @@ static struct boot_img_t *read_auth_image(struct spl_image_info *spl_image, images = (struct boot_img_t *)((u8 *)container + sizeof(struct container_hdr)); - if (images[image_index].offset % info->bl_len) { + if (!IS_ALIGNED(images[image_index].offset, spl_get_bl_len(info))) { printf("%s: image%d offset not aligned to %u\n", - __func__, image_index, info->bl_len); + __func__, image_index, spl_get_bl_len(info)); return NULL; } - sectors = roundup(images[image_index].size, info->bl_len) / - info->bl_len; - sector = images[image_index].offset / info->bl_len + - container_sector; + size = ALIGN(images[image_index].size, spl_get_bl_len(info)); + offset = images[image_index].offset + container_offset; - debug("%s: container: %p sector: %lu sectors: %u\n", __func__, - container, sector, sectors); - if (info->read(info, sector, sectors, - map_sysmem(images[image_index].dst, - images[image_index].size)) != sectors) { + debug("%s: container: %p offset: %lu size: %lu\n", __func__, + container, offset, size); + if (info->read(info, offset, size, + map_sysmem(images[image_index].dst - overhead, + images[image_index].size)) < + images[image_index].size) { printf("%s wrong\n", __func__); return NULL; } @@ -62,15 +60,13 @@ static struct boot_img_t *read_auth_image(struct spl_image_info *spl_image, } static int read_auth_container(struct spl_image_info *spl_image, - struct spl_load_info *info, ulong sector) + struct spl_load_info *info, ulong offset) { struct container_hdr *container = NULL; u16 length; - u32 sectors; int i, size, ret = 0; - size = roundup(CONTAINER_HDR_ALIGNMENT, info->bl_len); - sectors = size / info->bl_len; + size = ALIGN(CONTAINER_HDR_ALIGNMENT, spl_get_bl_len(info)); /* * It will not override the ATF code, so safe to use it here, @@ -80,9 +76,10 @@ static int read_auth_container(struct spl_image_info *spl_image, if (!container) return -ENOMEM; - debug("%s: container: %p sector: %lu sectors: %u\n", __func__, - container, sector, sectors); - if (info->read(info, sector, sectors, container) != sectors) { + debug("%s: container: %p offset: %lu size: %u\n", __func__, + container, offset, size); + if (info->read(info, offset, size, container) < + CONTAINER_HDR_ALIGNMENT) { ret = -EIO; goto end; } @@ -103,18 +100,16 @@ static int read_auth_container(struct spl_image_info *spl_image, debug("Container length %u\n", length); if (length > CONTAINER_HDR_ALIGNMENT) { - size = roundup(length, info->bl_len); - sectors = size / info->bl_len; + size = ALIGN(length, spl_get_bl_len(info)); free(container); container = malloc(size); if (!container) return -ENOMEM; - debug("%s: container: %p sector: %lu sectors: %u\n", - __func__, container, sector, sectors); - if (info->read(info, sector, sectors, container) != - sectors) { + debug("%s: container: %p offset: %lu size: %u\n", + __func__, container, offset, size); + if (info->read(info, offset, size, container) < length) { ret = -EIO; goto end; } @@ -129,7 +124,7 @@ static int read_auth_container(struct spl_image_info *spl_image, for (i = 0; i < container->num_images; i++) { struct boot_img_t *image = read_auth_image(spl_image, info, container, i, - sector); + offset); if (!image) { ret = -EINVAL; @@ -154,7 +149,7 @@ end: } int spl_load_imx_container(struct spl_image_info *spl_image, - struct spl_load_info *info, ulong sector) + struct spl_load_info *info, ulong offset) { - return read_auth_container(spl_image, info, sector); + return read_auth_container(spl_image, info, offset); } diff --git a/common/spl/spl_legacy.c b/common/spl/spl_legacy.c index 51656fb9617..08687ca8f6c 100644 --- a/common/spl/spl_legacy.c +++ b/common/spl/spl_legacy.c @@ -82,89 +82,39 @@ int spl_parse_legacy_header(struct spl_image_info *spl_image, return 0; } -/* - * This function is added explicitly to avoid code size increase, when - * no compression method is enabled. The compiler will optimize the - * following switch/case statement in spl_load_legacy_img() away due to - * Dead Code Elimination. - */ -static inline int spl_image_get_comp(const struct legacy_img_hdr *hdr) -{ - if (IS_ENABLED(CONFIG_SPL_LZMA)) - return image_get_comp(hdr); - - return IH_COMP_NONE; -} - -int spl_load_legacy_img(struct spl_image_info *spl_image, - struct spl_boot_device *bootdev, - struct spl_load_info *load, ulong offset, - struct legacy_img_hdr *hdr) +int spl_load_legacy_lzma(struct spl_image_info *spl_image, + struct spl_load_info *load, ulong offset) { - __maybe_unused SizeT lzma_len; - __maybe_unused void *src; - ulong dataptr; + SizeT lzma_len = LZMA_LEN; + void *src; + ulong dataptr, overhead, size; int ret; - /* - * If the payload is compressed, the decompressed data should be - * directly write to its load address. - */ - if (spl_image_get_comp(hdr) != IH_COMP_NONE) - spl_image->flags |= SPL_COPY_PAYLOAD_ONLY; + /* dataptr points to compressed payload */ + dataptr = ALIGN_DOWN(sizeof(struct legacy_img_hdr), + spl_get_bl_len(load)); + overhead = sizeof(struct legacy_img_hdr) - dataptr; + size = ALIGN(spl_image->size + overhead, spl_get_bl_len(load)); + dataptr += offset; + + debug("LZMA: Decompressing %08lx to %08lx\n", + dataptr, spl_image->load_addr); + src = malloc(size); + if (!src) { + printf("Unable to allocate %d bytes for LZMA\n", + spl_image->size); + return -ENOMEM; + } - ret = spl_parse_image_header(spl_image, bootdev, hdr); - if (ret) + load->read(load, dataptr, size, src); + ret = lzmaBuffToBuffDecompress(map_sysmem(spl_image->load_addr, + spl_image->size), &lzma_len, + src + overhead, spl_image->size); + if (ret) { + printf("LZMA decompression error: %d\n", ret); return ret; - - /* Read image */ - switch (spl_image_get_comp(hdr)) { - case IH_COMP_NONE: - dataptr = offset; - - /* - * Image header will be skipped only if SPL_COPY_PAYLOAD_ONLY - * is set - */ - if (spl_image->flags & SPL_COPY_PAYLOAD_ONLY) - dataptr += sizeof(*hdr); - - load->read(load, dataptr, spl_image->size, - map_sysmem(spl_image->load_addr, spl_image->size)); - break; - - case IH_COMP_LZMA: - lzma_len = LZMA_LEN; - - /* dataptr points to compressed payload */ - dataptr = offset + sizeof(*hdr); - - debug("LZMA: Decompressing %08lx to %08lx\n", - dataptr, spl_image->load_addr); - src = malloc(spl_image->size); - if (!src) { - printf("Unable to allocate %d bytes for LZMA\n", - spl_image->size); - return -ENOMEM; - } - - load->read(load, dataptr, spl_image->size, src); - ret = lzmaBuffToBuffDecompress(map_sysmem(spl_image->load_addr, - spl_image->size), - &lzma_len, src, spl_image->size); - if (ret) { - printf("LZMA decompression error: %d\n", ret); - return ret; - } - - spl_image->size = lzma_len; - break; - - default: - debug("Compression method %s is not supported\n", - genimg_get_comp_short_name(image_get_comp(hdr))); - return -EINVAL; } + spl_image->size = lzma_len; return 0; } diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index 82689da1401..3d032bb27ce 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -8,9 +8,9 @@ #include <common.h> #include <dm.h> #include <log.h> -#include <mapmem.h> #include <part.h> #include <spl.h> +#include <spl_load.h> #include <linux/compiler.h> #include <errno.h> #include <asm/u-boot.h> @@ -19,55 +19,14 @@ #include <image.h> #include <imx_container.h> -static int mmc_load_legacy(struct spl_image_info *spl_image, - struct spl_boot_device *bootdev, - struct mmc *mmc, - ulong sector, struct legacy_img_hdr *header) +static ulong h_spl_load_read(struct spl_load_info *load, ulong off, + ulong size, void *buf) { - u32 image_offset_sectors; - u32 image_size_sectors; - unsigned long count; - u32 image_offset; - int ret; - - ret = spl_parse_image_header(spl_image, bootdev, header); - if (ret) - return ret; - - /* convert offset to sectors - round down */ - image_offset_sectors = spl_image->offset / mmc->read_bl_len; - /* calculate remaining offset */ - image_offset = spl_image->offset % mmc->read_bl_len; + struct blk_desc *bd = load->priv; + lbaint_t sector = off >> bd->log2blksz; + lbaint_t count = size >> bd->log2blksz; - /* convert size to sectors - round up */ - image_size_sectors = (spl_image->size + mmc->read_bl_len - 1) / - mmc->read_bl_len; - - /* Read the header too to avoid extra memcpy */ - count = blk_dread(mmc_get_blk_desc(mmc), - sector + image_offset_sectors, - image_size_sectors, - map_sysmem(spl_image->load_addr, - image_size_sectors * mmc->read_bl_len)); - debug("read %x sectors to %lx\n", image_size_sectors, - spl_image->load_addr); - if (count != image_size_sectors) - return -EIO; - - if (image_offset) - memmove((void *)(ulong)spl_image->load_addr, - (void *)(ulong)spl_image->load_addr + image_offset, - spl_image->size); - - return 0; -} - -static ulong h_spl_load_read(struct spl_load_info *load, ulong sector, - ulong count, void *buf) -{ - struct mmc *mmc = load->dev; - - return blk_dread(mmc_get_blk_desc(mmc), sector, count, buf); + return blk_dread(bd, sector, count, buf) << bd->log2blksz; } static __maybe_unused unsigned long spl_mmc_raw_uboot_offset(int part) @@ -85,48 +44,14 @@ int mmc_load_image_raw_sector(struct spl_image_info *spl_image, struct spl_boot_device *bootdev, struct mmc *mmc, unsigned long sector) { - unsigned long count; - struct legacy_img_hdr *header; + int ret; struct blk_desc *bd = mmc_get_blk_desc(mmc); - int ret = 0; - - header = spl_get_load_buffer(-sizeof(*header), bd->blksz); - - /* read image header to find the image size & load address */ - count = blk_dread(bd, sector, 1, header); - debug("hdr read sector %lx, count=%lu\n", sector, count); - if (count == 0) { - ret = -EIO; - goto end; - } - - if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) && - image_get_magic(header) == FDT_MAGIC) { - struct spl_load_info load; - - debug("Found FIT\n"); - load.dev = mmc; - load.priv = NULL; - load.filename = NULL; - load.bl_len = mmc->read_bl_len; - load.read = h_spl_load_read; - ret = spl_load_simple_fit(spl_image, &load, sector, header); - } else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER) && - valid_container_hdr((void *)header)) { - struct spl_load_info load; - - load.dev = mmc; - load.priv = NULL; - load.filename = NULL; - load.bl_len = mmc->read_bl_len; - load.read = h_spl_load_read; - - ret = spl_load_imx_container(spl_image, &load, sector); - } else { - ret = mmc_load_legacy(spl_image, bootdev, mmc, sector, header); - } + struct spl_load_info load; -end: + load.priv = bd; + spl_set_bl_len(&load, bd->blksz); + load.read = h_spl_load_read; + ret = spl_load(spl_image, bootdev, &load, 0, sector << bd->log2blksz); if (ret) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT puts("mmc_load_image_raw_sector: mmc block read error\n"); diff --git a/common/spl/spl_nand.c b/common/spl/spl_nand.c index 07916bedbb9..3b0a1524238 100644 --- a/common/spl/spl_nand.c +++ b/common/spl/spl_nand.c @@ -10,7 +10,9 @@ #include <imx_container.h> #include <log.h> #include <spl.h> +#include <spl_load.h> #include <asm/io.h> +#include <mapmem.h> #include <nand.h> #include <linux/libfdt_env.h> #include <fdt.h> @@ -32,7 +34,8 @@ static int spl_nand_load_image(struct spl_image_info *spl_image, nand_spl_load_image(spl_nand_get_uboot_raw_page(), CFG_SYS_NAND_U_BOOT_SIZE, - (void *)CFG_SYS_NAND_U_BOOT_DST); + map_sysmem(CFG_SYS_NAND_U_BOOT_DST, + CFG_SYS_NAND_U_BOOT_SIZE)); spl_set_header_raw_uboot(spl_image); nand_deselect(); @@ -40,104 +43,45 @@ static int spl_nand_load_image(struct spl_image_info *spl_image, } #else -static ulong spl_nand_fit_read(struct spl_load_info *load, ulong offs, - ulong size, void *dst) +__weak u32 nand_spl_adjust_offset(u32 sector, u32 offs) { - int err; - ulong sector; - - sector = *(int *)load->priv; - offs *= load->bl_len; - size *= load->bl_len; - offs = sector + nand_spl_adjust_offset(sector, offs - sector); - err = nand_spl_load_image(offs, size, dst); - if (err) - return 0; - - return size / load->bl_len; + return offs; } -static ulong spl_nand_legacy_read(struct spl_load_info *load, ulong offs, - ulong size, void *dst) +static ulong spl_nand_read(struct spl_load_info *load, ulong offs, ulong size, + void *dst) { int err; + ulong sector; debug("%s: offs %lx, size %lx, dst %p\n", __func__, offs, size, dst); + sector = *(int *)load->priv; + offs = sector + nand_spl_adjust_offset(sector, offs - sector); err = nand_spl_load_image(offs, size, dst); + spl_set_bl_len(load, nand_page_size()); if (err) return 0; return size; } -struct mtd_info * __weak nand_get_mtd(void) -{ - return NULL; -} - static int spl_nand_load_element(struct spl_image_info *spl_image, - struct spl_boot_device *bootdev, - int offset, struct legacy_img_hdr *header) + struct spl_boot_device *bootdev, int offset) { - struct mtd_info *mtd = nand_get_mtd(); - int bl_len = mtd ? mtd->writesize : 1; - int err; + struct spl_load_info load; - err = nand_spl_load_image(offset, sizeof(*header), (void *)header); - if (err) - return err; - - if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) && - image_get_magic(header) == FDT_MAGIC) { - struct spl_load_info load; - - debug("Found FIT\n"); - load.dev = NULL; - load.priv = &offset; - load.filename = NULL; - load.bl_len = bl_len; - load.read = spl_nand_fit_read; - return spl_load_simple_fit(spl_image, &load, offset / bl_len, header); - } else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER) && - valid_container_hdr((void *)header)) { - struct spl_load_info load; - - load.dev = NULL; - load.priv = NULL; - load.filename = NULL; - load.bl_len = bl_len; - load.read = spl_nand_fit_read; - return spl_load_imx_container(spl_image, &load, offset / bl_len); - } else if (IS_ENABLED(CONFIG_SPL_LEGACY_IMAGE_FORMAT) && - image_get_magic(header) == IH_MAGIC) { - struct spl_load_info load; - - debug("Found legacy image\n"); - load.dev = NULL; - load.priv = NULL; - load.filename = NULL; - load.bl_len = 1; - load.read = spl_nand_legacy_read; - - return spl_load_legacy_img(spl_image, bootdev, &load, offset, header); - } else { - err = spl_parse_image_header(spl_image, bootdev, header); - if (err) - return err; - return nand_spl_load_image(offset, spl_image->size, - (void *)(ulong)spl_image->load_addr); - } + load.priv = &offset; + spl_set_bl_len(&load, 1); + load.read = spl_nand_read; + return spl_load(spl_image, bootdev, &load, 0, offset); } static int spl_nand_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) { int err; - struct legacy_img_hdr *header; - int *src __attribute__((unused)); - int *dst __attribute__((unused)); #ifdef CONFIG_SPL_NAND_SOFTECC debug("spl: nand - using sw ecc\n"); @@ -146,10 +90,12 @@ static int spl_nand_load_image(struct spl_image_info *spl_image, #endif nand_init(); - header = spl_get_load_buffer(0, sizeof(*header)); - #if CONFIG_IS_ENABLED(OS_BOOT) if (!spl_start_uboot()) { + int *src, *dst; + struct legacy_img_hdr *header = + spl_get_load_buffer(0, sizeof(*header)); + /* * load parameter image * load to temp position since nand_spl_load_image reads @@ -192,20 +138,18 @@ static int spl_nand_load_image(struct spl_image_info *spl_image, } #endif #ifdef CONFIG_NAND_ENV_DST - spl_nand_load_element(spl_image, bootdev, CONFIG_ENV_OFFSET, header); + spl_nand_load_element(spl_image, bootdev, CONFIG_ENV_OFFSET); #ifdef CONFIG_ENV_OFFSET_REDUND - spl_nand_load_element(spl_image, bootdev, CONFIG_ENV_OFFSET_REDUND, header); + spl_nand_load_element(spl_image, bootdev, CONFIG_ENV_OFFSET_REDUND); #endif #endif /* Load u-boot */ - err = spl_nand_load_element(spl_image, bootdev, spl_nand_get_uboot_raw_page(), - header); + err = spl_nand_load_element(spl_image, bootdev, spl_nand_get_uboot_raw_page()); #ifdef CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND #if CONFIG_SYS_NAND_U_BOOT_OFFS != CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND if (err) err = spl_nand_load_element(spl_image, bootdev, - CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND, - header); + CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND); #endif #endif nand_deselect(); diff --git a/common/spl/spl_net.c b/common/spl/spl_net.c index f01d4df8bc6..898f9df705a 100644 --- a/common/spl/spl_net.c +++ b/common/spl/spl_net.c @@ -11,8 +11,8 @@ #include <errno.h> #include <image.h> #include <log.h> -#include <mapmem.h> #include <spl.h> +#include <spl_load.h> #include <net.h> #include <linux/libfdt.h> @@ -29,8 +29,7 @@ static ulong spl_net_load_read(struct spl_load_info *load, ulong sector, static int spl_net_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) { - struct legacy_img_hdr *header = map_sysmem(image_load_addr, - sizeof(*header)); + struct spl_load_info load; int rv; env_init(); @@ -49,27 +48,9 @@ static int spl_net_load_image(struct spl_image_info *spl_image, return rv; } - if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) && - image_get_magic(header) == FDT_MAGIC) { - struct spl_load_info load; - - debug("Found FIT\n"); - load.bl_len = 1; - load.read = spl_net_load_read; - rv = spl_load_simple_fit(spl_image, &load, 0, header); - } else { - debug("Legacy image\n"); - - rv = spl_parse_image_header(spl_image, bootdev, header); - if (rv) - return rv; - - memcpy(map_sysmem(spl_image->load_addr, spl_image->size), - map_sysmem(image_load_addr, spl_image->size), - spl_image->size); - } - - return rv; + spl_set_bl_len(&load, 1); + load.read = spl_net_load_read; + return spl_load(spl_image, bootdev, &load, 0, 0); } #endif diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c index 236b0718283..70745114efe 100644 --- a/common/spl/spl_nor.c +++ b/common/spl/spl_nor.c @@ -7,8 +7,8 @@ #include <image.h> #include <imx_container.h> #include <log.h> -#include <mapmem.h> #include <spl.h> +#include <spl_load.h> static ulong spl_nor_load_read(struct spl_load_info *load, ulong sector, ulong count, void *buf) @@ -28,8 +28,7 @@ unsigned long __weak spl_nor_get_uboot_base(void) static int spl_nor_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) { - struct legacy_img_hdr *header; - __maybe_unused struct spl_load_info load; + struct spl_load_info load; /* * Loading of the payload to SDRAM is done with skipping of @@ -43,13 +42,14 @@ static int spl_nor_load_image(struct spl_image_info *spl_image, * Load Linux from its location in NOR flash to its defined * location in SDRAM */ - header = (void *)CONFIG_SYS_OS_BASE; + const struct legacy_img_hdr *header = + (const struct legacy_img_hdr *)CONFIG_SYS_OS_BASE; #ifdef CONFIG_SPL_LOAD_FIT if (image_get_magic(header) == FDT_MAGIC) { int ret; debug("Found FIT\n"); - load.bl_len = 1; + spl_set_bl_len(&load, 1); load.read = spl_nor_load_read; ret = spl_load_simple_fit(spl_image, &load, @@ -93,34 +93,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image, * Load real U-Boot from its location in NOR flash to its * defined location in SDRAM */ - header = map_sysmem(spl_nor_get_uboot_base(), sizeof(*header)); -#ifdef CONFIG_SPL_LOAD_FIT - if (image_get_magic(header) == FDT_MAGIC) { - debug("Found FIT format U-Boot\n"); - load.bl_len = 1; - load.read = spl_nor_load_read; - return spl_load_simple_fit(spl_image, &load, - spl_nor_get_uboot_base(), - (void *)header); - } -#endif - if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER) && - valid_container_hdr((void *)header)) { - load.bl_len = 1; - load.read = spl_nor_load_read; - return spl_load_imx_container(spl_image, &load, - spl_nor_get_uboot_base()); - } - - /* Legacy image handling */ - if (IS_ENABLED(CONFIG_SPL_LEGACY_IMAGE_FORMAT)) { - load.bl_len = 1; - load.read = spl_nor_load_read; - return spl_load_legacy_img(spl_image, bootdev, &load, - spl_nor_get_uboot_base(), - header); - } - - return -EINVAL; + spl_set_bl_len(&load, 1); + load.read = spl_nor_load_read; + return spl_load(spl_image, bootdev, &load, 0, spl_nor_get_uboot_base()); } SPL_LOAD_IMAGE_METHOD("NOR", 0, BOOT_DEVICE_NOR, spl_nor_load_image); diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c index 4158ed1c32d..8aeda237be1 100644 --- a/common/spl/spl_ram.c +++ b/common/spl/spl_ram.c @@ -70,7 +70,7 @@ static int spl_ram_load_image(struct spl_image_info *spl_image, struct spl_load_info load; debug("Found FIT\n"); - load.bl_len = 1; + spl_set_bl_len(&load, 1); load.read = spl_ram_load_read; ret = spl_load_simple_fit(spl_image, &load, 0, header); } else { diff --git a/common/spl/spl_semihosting.c b/common/spl/spl_semihosting.c index f7dd289286d..941fa911040 100644 --- a/common/spl/spl_semihosting.c +++ b/common/spl/spl_semihosting.c @@ -8,34 +8,19 @@ #include <log.h> #include <semihosting.h> #include <spl.h> - -static int smh_read_full(long fd, void *memp, size_t len) -{ - long read; - - read = smh_read(fd, memp, len); - if (read < 0) - return read; - if (read != len) - return -EIO; - return 0; -} +#include <spl_load.h> static ulong smh_fit_read(struct spl_load_info *load, ulong file_offset, ulong size, void *buf) { - long fd; + long fd = *(long *)load->priv; ulong ret; - fd = smh_open(load->filename, MODE_READ | MODE_BINARY); - if (fd < 0) { - log_debug("could not open %s: %ld\n", load->filename, fd); + if (smh_seek(fd, file_offset)) return 0; - } - ret = smh_read(fd, buf, size); - smh_close(fd); - return ret; + ret = smh_read(fd, buf, size); + return ret < 0 ? 0 : ret; } static int spl_smh_load_image(struct spl_image_info *spl_image, @@ -44,8 +29,7 @@ static int spl_smh_load_image(struct spl_image_info *spl_image, const char *filename = CONFIG_SPL_FS_LOAD_PAYLOAD_NAME; int ret; long fd, len; - struct legacy_img_hdr *header = - spl_get_load_buffer(-sizeof(*header), sizeof(*header)); + struct spl_load_info load; fd = smh_open(filename, MODE_READ | MODE_BINARY); if (fd < 0) { @@ -60,39 +44,10 @@ static int spl_smh_load_image(struct spl_image_info *spl_image, } len = ret; - ret = smh_read_full(fd, header, sizeof(struct legacy_img_hdr)); - if (ret) { - log_debug("could not read image header: %d\n", ret); - goto out; - } - - if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) && - image_get_magic(header) == FDT_MAGIC) { - struct spl_load_info load; - - debug("Found FIT\n"); - load.read = smh_fit_read; - load.bl_len = 1; - load.filename = filename; - load.priv = NULL; - smh_close(fd); - - return spl_load_simple_fit(spl_image, &load, 0, header); - } - - ret = spl_parse_image_header(spl_image, bootdev, header); - if (ret) { - log_debug("failed to parse image header: %d\n", ret); - goto out; - } - - ret = smh_seek(fd, 0); - if (ret) { - log_debug("could not seek to start of image: %d\n", ret); - goto out; - } - - ret = smh_read_full(fd, (void *)spl_image->load_addr, len); + load.read = smh_fit_read; + spl_set_bl_len(&load, 1); + load.priv = &fd; + ret = spl_load(spl_image, bootdev, &load, len, 0); if (ret) log_debug("could not read %s: %d\n", filename, ret); out: diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c index 3ac4b1b5091..89de73c726c 100644 --- a/common/spl/spl_spi.c +++ b/common/spl/spl_spi.c @@ -12,54 +12,19 @@ #include <image.h> #include <imx_container.h> #include <log.h> -#include <mapmem.h> #include <spi.h> #include <spi_flash.h> #include <errno.h> #include <spl.h> +#include <spl_load.h> #include <asm/global_data.h> #include <asm/io.h> #include <dm/ofnode.h> -#if CONFIG_IS_ENABLED(OS_BOOT) -/* - * Load the kernel, check for a valid header we can parse, and if found load - * the kernel and then device tree. - */ -static int spi_load_image_os(struct spl_image_info *spl_image, - struct spl_boot_device *bootdev, - struct spi_flash *flash, - struct legacy_img_hdr *header) -{ - int err; - - /* Read for a header, parse or error out. */ - spi_flash_read(flash, CFG_SYS_SPI_KERNEL_OFFS, sizeof(*header), - (void *)header); - - if (image_get_magic(header) != IH_MAGIC) - return -1; - - err = spl_parse_image_header(spl_image, bootdev, header); - if (err) - return err; - - spi_flash_read(flash, CFG_SYS_SPI_KERNEL_OFFS, - spl_image->size, (void *)spl_image->load_addr); - - /* Read device tree. */ - spi_flash_read(flash, CFG_SYS_SPI_ARGS_OFFS, - CFG_SYS_SPI_ARGS_SIZE, - (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR); - - return 0; -} -#endif - static ulong spl_spi_fit_read(struct spl_load_info *load, ulong sector, ulong count, void *buf) { - struct spi_flash *flash = load->dev; + struct spi_flash *flash = load->priv; ulong ret; ret = spi_flash_read(flash, sector, count, buf); @@ -95,9 +60,9 @@ static int spl_spi_load_image(struct spl_image_info *spl_image, int err = 0; unsigned int payload_offs; struct spi_flash *flash; - struct legacy_img_hdr *header; unsigned int sf_bus = spl_spi_boot_bus(); unsigned int sf_cs = spl_spi_boot_cs(); + struct spl_load_info load; /* * Load U-Boot image from SPI flash into RAM @@ -112,81 +77,32 @@ static int spl_spi_load_image(struct spl_image_info *spl_image, return -ENODEV; } - payload_offs = spl_spi_get_uboot_offs(flash); + load.priv = flash; + spl_set_bl_len(&load, 1); + load.read = spl_spi_fit_read; - header = spl_get_load_buffer(-sizeof(*header), sizeof(*header)); +#if CONFIG_IS_ENABLED(OS_BOOT) + if (spl_start_uboot()) { + int err = spl_load(spl_image, bootdev, &load, 0, + CFG_SYS_SPI_KERNEL_OFFS); + + if (!err) + /* Read device tree. */ + return spi_flash_read(flash, CFG_SYS_SPI_ARGS_OFFS, + CFG_SYS_SPI_ARGS_SIZE, + (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR); + } +#endif + payload_offs = spl_spi_get_uboot_offs(flash); if (CONFIG_IS_ENABLED(OF_REAL)) { payload_offs = ofnode_conf_read_int("u-boot,spl-payload-offset", payload_offs); } -#if CONFIG_IS_ENABLED(OS_BOOT) - if (spl_start_uboot() || spi_load_image_os(spl_image, bootdev, flash, header)) -#endif - { - /* Load u-boot, mkimage header is 64 bytes. */ - err = spi_flash_read(flash, payload_offs, sizeof(*header), - (void *)header); - if (err) { - debug("%s: Failed to read from SPI flash (err=%d)\n", - __func__, err); - return err; - } - - if (IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL) && - image_get_magic(header) == FDT_MAGIC) { - u32 size = roundup(fdt_totalsize(header), 4); - - err = spi_flash_read(flash, payload_offs, - size, - map_sysmem(CONFIG_SYS_LOAD_ADDR, - size)); - if (err) - return err; - err = spl_parse_image_header(spl_image, bootdev, - phys_to_virt(CONFIG_SYS_LOAD_ADDR)); - } else if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) && - image_get_magic(header) == FDT_MAGIC) { - struct spl_load_info load; - - debug("Found FIT\n"); - load.dev = flash; - load.priv = NULL; - load.filename = NULL; - load.bl_len = 1; - load.read = spl_spi_fit_read; - err = spl_load_simple_fit(spl_image, &load, - payload_offs, - header); - } else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER) && - valid_container_hdr((void *)header)) { - struct spl_load_info load; - - load.dev = flash; - load.priv = NULL; - load.filename = NULL; - load.bl_len = 1; - load.read = spl_spi_fit_read; - - err = spl_load_imx_container(spl_image, &load, - payload_offs); - } else { - err = spl_parse_image_header(spl_image, bootdev, header); - if (err) - return err; - err = spi_flash_read(flash, payload_offs + spl_image->offset, - spl_image->size, - map_sysmem(spl_image->load_addr, - spl_image->size)); - } - if (IS_ENABLED(CONFIG_SPI_FLASH_SOFT_RESET)) { - err = spi_nor_remove(flash); - if (err) - return err; - } - } - + err = spl_load(spl_image, bootdev, &load, 0, payload_offs); + if (IS_ENABLED(CONFIG_SPI_FLASH_SOFT_RESET)) + err = spi_nor_remove(flash); return err; } /* Use priorty 1 so that boards can override this */ diff --git a/common/spl/spl_ymodem.c b/common/spl/spl_ymodem.c index 038b4438457..1faaa2c938d 100644 --- a/common/spl/spl_ymodem.c +++ b/common/spl/spl_ymodem.c @@ -134,10 +134,8 @@ int spl_ymodem_load_image(struct spl_image_info *spl_image, struct ymodem_fit_info info; debug("Found FIT\n"); - load.dev = NULL; load.priv = (void *)&info; - load.filename = NULL; - load.bl_len = 1; + spl_set_bl_len(&load, 1); info.buf = buf; info.image_read = BUF_SIZE; load.read = ymodem_read_fit; diff --git a/common/version.c b/common/version.c new file mode 100644 index 00000000000..6e27bb80e39 --- /dev/null +++ b/common/version.c @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +#include <timestamp.h> +#include <version.h> +#include <version_string.h> + +#define U_BOOT_VERSION_STRING U_BOOT_VERSION " (" U_BOOT_DATE " - " \ + U_BOOT_TIME " " U_BOOT_TZ ")" CONFIG_IDENT_STRING + +const char version_string[] = U_BOOT_VERSION_STRING; +const unsigned short version_num = U_BOOT_VERSION_NUM; +const unsigned char version_num_patch = U_BOOT_VERSION_NUM_PATCH; diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig index 16993ef5386..0599ae217e6 100644 --- a/configs/am335x_baltos_defconfig +++ b/configs/am335x_baltos_defconfig @@ -22,7 +22,7 @@ CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y @@ -67,7 +67,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index f048e60f7f3..5d38dad35bb 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -26,7 +26,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_ETH=y # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_MUSB_NEW=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -84,7 +84,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig index 9866246aa51..fff5265e56a 100644 --- a/configs/am335x_evm_spiboot_defconfig +++ b/configs/am335x_evm_spiboot_defconfig @@ -13,6 +13,7 @@ CONFIG_CLOCK_SYNTHESIZER=y # CONFIG_OF_LIBFDT_OVERLAY is not set # CONFIG_SPL_MMC is not set CONFIG_SPL=y +# CONFIG_SPL_FS_FAT is not set CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_TIMESTAMP=y @@ -27,8 +28,7 @@ CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y # CONFIG_SPL_FS_EXT4 is not set -CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig index 01d848ceede..5369e46bc1b 100644 --- a/configs/am335x_guardian_defconfig +++ b/configs/am335x_guardian_defconfig @@ -99,7 +99,6 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x40000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x1000 CONFIG_SYS_NAND_OOBSIZE=0x100 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig index b961b6c41f0..ea46e58be2d 100644 --- a/configs/am335x_hs_evm_defconfig +++ b/configs/am335x_hs_evm_defconfig @@ -27,7 +27,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y # CONFIG_SPL_ENV_SUPPORT is not set # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/am335x_hs_evm_uart_defconfig b/configs/am335x_hs_evm_uart_defconfig index b5d8eac9f3d..7886557c8da 100644 --- a/configs/am335x_hs_evm_uart_defconfig +++ b/configs/am335x_hs_evm_uart_defconfig @@ -29,7 +29,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y # CONFIG_SPL_ENV_SUPPORT is not set # CONFIG_SPL_FS_EXT4 is not set -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/am335x_igep003x_defconfig b/configs/am335x_igep003x_defconfig index 4dd6366ef67..e2c5b70c405 100644 --- a/configs/am335x_igep003x_defconfig +++ b/configs/am335x_igep003x_defconfig @@ -24,7 +24,7 @@ CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y @@ -85,7 +85,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_MTD_UBI_FASTMAP=y diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig index 9ba376feda8..fb61dd71c69 100644 --- a/configs/am335x_sl50_defconfig +++ b/configs/am335x_sl50_defconfig @@ -28,7 +28,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 0a83ac9378c..a96936c92d2 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -26,7 +26,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y @@ -75,7 +75,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index 6571afd345e..d5ce2995548 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -22,7 +22,7 @@ CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_ETH=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y @@ -72,7 +72,6 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x40000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x1000 CONFIG_SYS_NAND_OOBSIZE=0xe0 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/am43xx_evm_rtconly_defconfig b/configs/am43xx_evm_rtconly_defconfig index e84aed4d54d..a0a9e8ac584 100644 --- a/configs/am43xx_evm_rtconly_defconfig +++ b/configs/am43xx_evm_rtconly_defconfig @@ -21,7 +21,7 @@ CONFIG_SPL_MAX_SIZE=0x439e0 CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y @@ -62,7 +62,6 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x40000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x1000 CONFIG_SYS_NAND_OOBSIZE=0xe0 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index 0cae3242b04..cd47806204e 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -20,7 +20,7 @@ CONFIG_SPL_MAX_SIZE=0x37690 CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y @@ -75,7 +75,6 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x40000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x1000 CONFIG_SYS_NAND_OOBSIZE=0xe0 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig index 370ee967258..d721664ecb1 100644 --- a/configs/am43xx_hs_evm_defconfig +++ b/configs/am43xx_hs_evm_defconfig @@ -28,7 +28,7 @@ CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_ETH=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y @@ -68,7 +68,6 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x40000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x1000 CONFIG_SYS_NAND_OOBSIZE=0xe0 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/am62ax_evm_r5_defconfig b/configs/am62ax_evm_r5_defconfig index d52de8bf8be..40704151255 100644 --- a/configs/am62ax_evm_r5_defconfig +++ b/configs/am62ax_evm_r5_defconfig @@ -43,7 +43,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 CONFIG_SPL_DMA=y CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_POWER_DOMAIN=y diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig index f4369865bf6..55289b967b7 100644 --- a/configs/am65x_evm_a53_defconfig +++ b/configs/am65x_evm_a53_defconfig @@ -52,7 +52,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_POWER_DOMAIN=y diff --git a/configs/am65x_evm_r5_usbdfu_defconfig b/configs/am65x_evm_r5_usbdfu_defconfig index f610b2dd94e..6b0bb120d10 100644 --- a/configs/am65x_evm_r5_usbdfu_defconfig +++ b/configs/am65x_evm_r5_usbdfu_defconfig @@ -21,7 +21,6 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL_SIZE_LIMIT=0x7ec00 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x2000 -CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index aa9cf77960b..cf2af5797f3 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -59,6 +59,7 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y +# CONFIG_CMD_SCSI is not set CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y @@ -105,7 +106,7 @@ CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_DM_SCSI=y +CONFIG_SCSI=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_USB=y diff --git a/configs/axm_defconfig b/configs/axm_defconfig index f9c02144c4a..e1a01b24b88 100644 --- a/configs/axm_defconfig +++ b/configs/axm_defconfig @@ -86,7 +86,6 @@ CONFIG_MTD=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig index 06642d282d1..0cd649d643a 100644 --- a/configs/chiliboard_defconfig +++ b/configs/chiliboard_defconfig @@ -63,7 +63,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index 73ccefd269a..1a558b030fe 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -37,7 +37,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x480 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index ecf61f0d1e6..5eaa6dbb5fc 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -81,7 +81,6 @@ CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig index 5f6f5d788d0..62b8edde248 100644 --- a/configs/da850evm_nand_defconfig +++ b/configs/da850evm_nand_defconfig @@ -88,7 +88,6 @@ CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y CONFIG_NAND_DAVINCI=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index ec4031da51d..569b156c997 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -73,7 +73,6 @@ CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y CONFIG_NAND_LPC32XX_SLC=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 # CONFIG_SYS_NAND_5_ADDR_CYCLE is not set diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index ef16da176a9..a7f82442eb0 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -77,7 +77,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index 5a83b6a08a2..154131e62e0 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -52,6 +52,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SATA=y +# CONFIG_CMD_SCSI is not set CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_WDT=y @@ -99,7 +100,7 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_DM_SCSI=y +CONFIG_SCSI=y CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_SPI=y diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 19ca89fa867..c3a3ec2cd42 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -104,7 +104,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/draco_defconfig b/configs/draco_defconfig index ee19920a703..2a82087ab31 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -100,7 +100,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/edison_defconfig b/configs/edison_defconfig index f134680e412..db2e35f388b 100644 --- a/configs/edison_defconfig +++ b/configs/edison_defconfig @@ -27,6 +27,7 @@ CONFIG_CMD_DFU=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +# CONFIG_CMD_SCSI is not set CONFIG_CMD_TIMER=y CONFIG_CMD_HASH=y CONFIG_CMD_EXT4=y diff --git a/configs/efi-x86_app32_defconfig b/configs/efi-x86_app32_defconfig index dfc315774a5..682ba5b8957 100644 --- a/configs/efi-x86_app32_defconfig +++ b/configs/efi-x86_app32_defconfig @@ -20,6 +20,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_PART=y +# CONFIG_CMD_SCSI is not set # CONFIG_CMD_NET is not set CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y diff --git a/configs/efi-x86_app64_defconfig b/configs/efi-x86_app64_defconfig index e0cfe3ee243..d6b6c3d8299 100644 --- a/configs/efi-x86_app64_defconfig +++ b/configs/efi-x86_app64_defconfig @@ -21,6 +21,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_PART=y +# CONFIG_CMD_SCSI is not set # CONFIG_CMD_NET is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index c0ce7a33569..4ac0abc56b0 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -104,7 +104,6 @@ CONFIG_SYS_MAX_NAND_DEVICE=3 CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x80000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x80 CONFIG_SYS_NAND_PAGE_SIZE=0x1000 CONFIG_SYS_NAND_OOBSIZE=0xe0 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index 3eb1917454d..35f7fb77e63 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -23,6 +23,7 @@ CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +# CONFIG_CMD_SCSI is not set CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig index 439fcc05753..0fb92ff1638 100644 --- a/configs/gardena-smart-gateway-at91sam_defconfig +++ b/configs/gardena-smart-gateway-at91sam_defconfig @@ -99,7 +99,6 @@ CONFIG_MTD=y CONFIG_NAND_ATMEL=y CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig index 993bbe29c6b..34439cf77be 100644 --- a/configs/igep00x0_defconfig +++ b/configs/igep00x0_defconfig @@ -24,7 +24,7 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y @@ -78,7 +78,6 @@ CONFIG_SYS_MTDPARTS_RUNTIME=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/imx6ulz_smm_m2_defconfig b/configs/imx6ulz_smm_m2_defconfig index d6edc719004..c471e04d9bd 100644 --- a/configs/imx6ulz_smm_m2_defconfig +++ b/configs/imx6ulz_smm_m2_defconfig @@ -25,7 +25,7 @@ CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BSS_START_ADDR=0x84100000 CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_CMD_DM=y diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig index 657eb354c1b..a9c02976f8c 100644 --- a/configs/imx8mn_bsh_smm_s2_defconfig +++ b/configs/imx8mn_bsh_smm_s2_defconfig @@ -43,7 +43,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_NAND_IDENT=y diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig index cb4a141675d..01f19570d7e 100644 --- a/configs/j7200_evm_a72_defconfig +++ b/configs/j7200_evm_a72_defconfig @@ -50,7 +50,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_DM_RESET=y diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig index d25dd8134b6..10b7205e49e 100644 --- a/configs/j7200_evm_r5_defconfig +++ b/configs/j7200_evm_r5_defconfig @@ -48,7 +48,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_DM_RESET=y diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index 99e0e168ebf..1d043f2fdeb 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -50,7 +50,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_DM_RESET=y diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig index e76ab5997fe..55169bb1391 100644 --- a/configs/j721e_evm_r5_defconfig +++ b/configs/j721e_evm_r5_defconfig @@ -53,7 +53,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_DM_RESET=y diff --git a/configs/j721s2_evm_a72_defconfig b/configs/j721s2_evm_a72_defconfig index 876f07816a2..a7adb9282b0 100644 --- a/configs/j721s2_evm_a72_defconfig +++ b/configs/j721s2_evm_a72_defconfig @@ -49,7 +49,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_DM_RESET=y diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig index 4990e271c3f..c0fdd86e1f0 100644 --- a/configs/j721s2_evm_r5_defconfig +++ b/configs/j721s2_evm_r5_defconfig @@ -55,7 +55,7 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_DM_RESET=y diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig index ef9e15d1520..e1ddc0af5db 100644 --- a/configs/m53menlo_defconfig +++ b/configs/m53menlo_defconfig @@ -90,7 +90,6 @@ CONFIG_SYS_NAND_USE_FLASH_BBT=y CONFIG_NAND_MXC=y CONFIG_MXC_NAND_HWECC=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/mvebu_ac5_rd_defconfig b/configs/mvebu_ac5_rd_defconfig index e8fa22b648b..0a9adcc0399 100644 --- a/configs/mvebu_ac5_rd_defconfig +++ b/configs/mvebu_ac5_rd_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y +# CONFIG_CMD_SCSI is not set CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -72,7 +73,7 @@ CONFIG_PINCTRL_ARMADA_8K=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_RTC=y -CONFIG_DM_SCSI=y +CONFIG_SCSI=y CONFIG_SYS_NS16550=y CONFIG_MVEBU_A3700_SPI=y CONFIG_DM_THERMAL=y diff --git a/configs/novena_defconfig b/configs/novena_defconfig index 278e3fd8adb..23899911882 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -48,6 +48,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_SATA=y +# CONFIG_CMD_SCSI is not set CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig index 539b0cfa4f7..5040af058dd 100644 --- a/configs/omap35_logic_defconfig +++ b/configs/omap35_logic_defconfig @@ -30,7 +30,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y @@ -74,7 +74,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig index f14ce3d23db..1ea35c7cfab 100644 --- a/configs/omap35_logic_somlv_defconfig +++ b/configs/omap35_logic_somlv_defconfig @@ -31,7 +31,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y @@ -83,7 +83,6 @@ CONFIG_SYS_MAX_FLASH_SECT=256 CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index cabd3659385..c8c9ae02f16 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -22,7 +22,7 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y @@ -83,7 +83,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index 33ff39ff548..93427f3691c 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -22,7 +22,7 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y @@ -74,7 +74,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 7d3d602c9d9..729586bfdc1 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -29,7 +29,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y @@ -73,7 +73,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig index 0141a425e07..f0f326d2f9c 100644 --- a/configs/omap3_logic_somlv_defconfig +++ b/configs/omap3_logic_somlv_defconfig @@ -31,7 +31,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y @@ -84,7 +84,6 @@ CONFIG_SYS_MAX_FLASH_SECT=256 CONFIG_MTD_RAW_NAND=y CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 47feff21bd4..63554d56016 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -84,7 +84,6 @@ CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y CONFIG_NAND_DAVINCI=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y diff --git a/configs/phycore-am335x-r2-regor_defconfig b/configs/phycore-am335x-r2-regor_defconfig index 4bdf8822181..cbfe1cf7985 100644 --- a/configs/phycore-am335x-r2-regor_defconfig +++ b/configs/phycore-am335x-r2-regor_defconfig @@ -28,7 +28,7 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y @@ -76,7 +76,6 @@ CONFIG_DM_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/phycore-am335x-r2-wega_defconfig b/configs/phycore-am335x-r2-wega_defconfig index 7644fbec273..b91b9665cc2 100644 --- a/configs/phycore-am335x-r2-wega_defconfig +++ b/configs/phycore-am335x-r2-wega_defconfig @@ -28,7 +28,7 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y @@ -76,7 +76,6 @@ CONFIG_DM_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/poplar_defconfig b/configs/poplar_defconfig index f0ab2319a47..b6e0c3166c1 100644 --- a/configs/poplar_defconfig +++ b/configs/poplar_defconfig @@ -22,6 +22,7 @@ CONFIG_CMD_USB=y # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x20000000 CONFIG_FASTBOOT_BUF_SIZE=0x10000000 diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index 2ea007d0de5..e1d1066815b 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -99,7 +99,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 9f538a2f83d..21495341e26 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -100,7 +100,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index ccf25667b50..248073be1f2 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -99,7 +99,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig index a1b6122f8eb..a0802f9c5fe 100644 --- a/configs/sama5d3_xplained_nandflash_defconfig +++ b/configs/sama5d3_xplained_nandflash_defconfig @@ -86,7 +86,6 @@ CONFIG_PMECC_CAP=4 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig index 6278a6c68a7..d96bb91e65d 100644 --- a/configs/sama5d3xek_nandflash_defconfig +++ b/configs/sama5d3xek_nandflash_defconfig @@ -90,7 +90,6 @@ CONFIG_PMECC_CAP=4 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index d12f749d7f4..68101a12fc2 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -84,7 +84,6 @@ CONFIG_PMECC_CAP=8 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y CONFIG_SYS_NAND_BLOCK_SIZE=0x40000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x1000 CONFIG_SYS_NAND_OOBSIZE=0xe0 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 27bfcdf0084..b8062db775d 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -81,7 +81,6 @@ CONFIG_PMECC_CAP=8 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y CONFIG_SYS_NAND_BLOCK_SIZE=0x40000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x1000 CONFIG_SYS_NAND_OOBSIZE=0xe0 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig index 6c488bac2b3..e3f7f11a214 100644 --- a/configs/sandbox64_defconfig +++ b/configs/sandbox64_defconfig @@ -1,4 +1,5 @@ CONFIG_TEXT_BASE=0 +CONFIG_SYS_MALLOC_LEN=0x6000000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="sandbox64" @@ -14,7 +15,6 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y -CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_BOOTSTAGE_FDT=y @@ -50,6 +50,7 @@ CONFIG_CMD_GPT_RENAME=y CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y CONFIG_CMD_LOADM=y +CONFIG_CMD_MTD=y CONFIG_CMD_OSD=y CONFIG_CMD_PCI=y CONFIG_CMD_READ=y @@ -167,6 +168,13 @@ CONFIG_PWRSEQ=y CONFIG_I2C_EEPROM=y CONFIG_MMC_SANDBOX=y CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_MAX_NAND_DEVICE=8 +CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_NAND_SANDBOX=y +CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_PAGE_SIZE=0x200 CONFIG_SPI_FLASH_SANDBOX=y CONFIG_BOOTDEV_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index bc5bcb2a623..b7ae1f07c71 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -1,4 +1,5 @@ CONFIG_TEXT_BASE=0 +CONFIG_SYS_MALLOC_LEN=0x6000000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="sandbox" @@ -15,7 +16,6 @@ CONFIG_FIT_CIPHER=y CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_MEASURED_BOOT=y -CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_BOOTSTAGE_FDT=y @@ -74,6 +74,7 @@ CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y CONFIG_CMD_LOADM=y CONFIG_CMD_LSBLK=y +CONFIG_CMD_MTD=y CONFIG_CMD_MUX=y CONFIG_CMD_OSD=y CONFIG_CMD_PCI=y @@ -216,6 +217,13 @@ CONFIG_MMC_PCI=y CONFIG_MMC_SANDBOX=y CONFIG_MMC_SDHCI=y CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_MAX_NAND_DEVICE=8 +CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_NAND_SANDBOX=y +CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_PAGE_SIZE=0x200 CONFIG_SPI_FLASH_SANDBOX=y CONFIG_BOOTDEV_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig index 0b637727d9f..9c774bb684a 100644 --- a/configs/sandbox_flattree_defconfig +++ b/configs/sandbox_flattree_defconfig @@ -12,7 +12,6 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y -CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_BOOTSTAGE_FDT=y diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig index cd412ee2693..8cfe30bd01b 100644 --- a/configs/sandbox_noinst_defconfig +++ b/configs/sandbox_noinst_defconfig @@ -25,7 +25,6 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y -CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_BOOTSTAGE_FDT=y @@ -51,6 +50,13 @@ CONFIG_SPL_ETH=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y CONFIG_SPL_MMC_WRITE=y +CONFIG_SPL_MTD=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_DRIVERS=y +CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y +CONFIG_SPL_NAND_BASE=y +CONFIG_SPL_NAND_IDENT=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_NET=y CONFIG_SPL_NOR_SUPPORT=y @@ -80,6 +86,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y +CONFIG_CMD_MTD=y CONFIG_CMD_OSD=y CONFIG_CMD_PCI=y CONFIG_CMD_REMOTEPROC=y @@ -180,6 +187,18 @@ CONFIG_PWRSEQ=y CONFIG_SPL_PWRSEQ=y CONFIG_FS_LOADER=y CONFIG_MMC_SANDBOX=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_MAX_NAND_DEVICE=8 +CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_NAND_SANDBOX=y +CONFIG_SYS_NAND_BLOCK_SIZE=0x2000 +CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_PAGE_SIZE=0x200 +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x0 CONFIG_SPI_FLASH_SANDBOX=y CONFIG_SPI_FLASH_ATMEL=y CONFIG_SPI_FLASH_EON=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index eeccee62b8c..f1cca13d5f3 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -20,7 +20,6 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y -CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_BOOTSTAGE_FDT=y diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig index 293e294d57a..62df03e7bf7 100644 --- a/configs/sandbox_vpl_defconfig +++ b/configs/sandbox_vpl_defconfig @@ -27,7 +27,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y CONFIG_SPL_LOAD_FIT=y -CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_BOOTSTAGE_FDT=y diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index 10cbccb69b0..80d2c0f1cc1 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -84,7 +84,6 @@ CONFIG_MTD=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/socfpga_secu1_defconfig b/configs/socfpga_secu1_defconfig index b8052f1deea..6a4106a559e 100644 --- a/configs/socfpga_secu1_defconfig +++ b/configs/socfpga_secu1_defconfig @@ -43,7 +43,7 @@ CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE is not set -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_BOOTM_LEN=0x4000000 diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig index 3864e21a180..f9711bedd7d 100644 --- a/configs/stm32746g-eval_spl_defconfig +++ b/configs/stm32746g-eval_spl_defconfig @@ -34,7 +34,7 @@ CONFIG_SPL_PAD_TO=0x9000 CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_XIP_SUPPORT=y CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80c0000 CONFIG_SPL_DM_RESET=y diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig index b2a786121c5..a2b740c9cce 100644 --- a/configs/stm32f746-disco_spl_defconfig +++ b/configs/stm32f746-disco_spl_defconfig @@ -34,7 +34,7 @@ CONFIG_SPL_PAD_TO=0x9000 CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_XIP_SUPPORT=y CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80c0000 CONFIG_SPL_DM_RESET=y diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig index 34622032210..37d22f8d95f 100644 --- a/configs/stm32f769-disco_spl_defconfig +++ b/configs/stm32f769-disco_spl_defconfig @@ -33,7 +33,7 @@ CONFIG_SPL_PAD_TO=0x9000 CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_XIP_SUPPORT=y CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x81c0000 CONFIG_SPL_DM_RESET=y diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 6df09352400..be553ad3c36 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -40,7 +40,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_FLASH_MTD=y diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 1d241529be7..f4dbbf36d7c 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -49,7 +49,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y CONFIG_SPL_RAM_SUPPORT=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 6e0c4a8cf9f..d4ead98826b 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -47,7 +47,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y -CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_MTD=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y CONFIG_SPL_RAM_SUPPORT=y diff --git a/configs/stm32mp25_defconfig b/configs/stm32mp25_defconfig new file mode 100644 index 00000000000..8423943f091 --- /dev/null +++ b/configs/stm32mp25_defconfig @@ -0,0 +1,52 @@ +CONFIG_ARM=y +CONFIG_ARCH_STM32MP=y +CONFIG_SYS_MALLOC_F_LEN=0x400000 +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x90000000 +CONFIG_DEFAULT_DEVICE_TREE="stm32mp257f-ev1" +CONFIG_STM32MP25X=y +CONFIG_DDR_CACHEABLE_SIZE=0x10000000 +CONFIG_TARGET_ST_STM32MP25X=y +CONFIG_SYS_LOAD_ADDR=0x84000000 +CONFIG_SYS_MEMTEST_START=0x84000000 +CONFIG_SYS_MEMTEST_END=0x88000000 +CONFIG_FIT=y +CONFIG_SYS_BOOTM_LEN=0x2000000 +CONFIG_BOOTDELAY=1 +CONFIG_LAST_STAGE_INIT=y +CONFIG_SYS_PROMPT="STM32MP> " +# CONFIG_CMD_BDI is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_ADTIMG=y +# CONFIG_CMD_ELF is not set +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_NET is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_RNG=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_LOG=y +CONFIG_OF_LIVE=y +CONFIG_GPIO_HOG=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_STM32F7=y +# CONFIG_MMC is not set +CONFIG_PINCONF=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_RAM=y +# CONFIG_STM32MP1_DDR is not set +CONFIG_DM_RNG=y +CONFIG_SERIAL_RX_BUFFER=y +# CONFIG_OPTEE_TA_AVB is not set +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y +CONFIG_WDT_ARM_SMC=y +CONFIG_ERRNO_STR=y +# CONFIG_LMB_USE_MAX_REGIONS is not set +CONFIG_LMB_MEMORY_REGIONS=2 +CONFIG_LMB_RESERVED_REGIONS=32 diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index cc5755178b7..9be30c8d8a4 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -94,7 +94,6 @@ CONFIG_MTD=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index 116700e0df0..1134624f9d2 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -100,7 +100,6 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig index e128a62cd00..f89b163ddf5 100644 --- a/configs/udoo_defconfig +++ b/configs/udoo_defconfig @@ -34,6 +34,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y # CONFIG_CMD_PINMUX is not set CONFIG_CMD_SATA=y +# CONFIG_CMD_SCSI is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y @@ -54,7 +55,7 @@ CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y -CONFIG_DM_SCSI=y +CONFIG_SCSI=y CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index 7c1727f8b12..c9ec962201b 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -45,6 +45,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SATA=y +# CONFIG_CMD_SCSI is not set CONFIG_CMD_USB=y CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y @@ -71,7 +72,7 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_PFUZE100=y -CONFIG_DM_SCSI=y +CONFIG_SCSI=y CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y diff --git a/configs/x240_defconfig b/configs/x240_defconfig index 4b1a761a908..152413de0e5 100644 --- a/configs/x240_defconfig +++ b/configs/x240_defconfig @@ -24,6 +24,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MTD=y CONFIG_CMD_PCI=y +# CONFIG_CMD_SCSI is not set CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -68,7 +69,7 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_RTC=y CONFIG_RTC_MAX313XX=y -CONFIG_DM_SCSI=y +CONFIG_SCSI=y CONFIG_SYS_NS16550=y CONFIG_MVEBU_A3700_SPI=y CONFIG_DM_THERMAL=y diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index a6f36fe30a5..afbf6f6934d 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -11,6 +11,8 @@ CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-qspi" CONFIG_SPL_STACK=0xfffffffc CONFIG_SPL=y +# CONFIG_SPL_FS_FAT is not set +# CONFIG_SPL_LIBDISK_SUPPORT is not set CONFIG_SYS_MEM_RSVD_FOR_MMU=y CONFIG_ZYNQMP_NO_DDR=y # CONFIG_PSCI_RESET is not set @@ -89,7 +91,6 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_ARM_DCC=y CONFIG_SPI=y CONFIG_ZYNQMP_GQSPI=y -# CONFIG_FAT_WRITE is not set CONFIG_PANIC_HANG=y # CONFIG_GZIP is not set # CONFIG_LMB is not set diff --git a/configs/zynq_cse_nand_defconfig b/configs/zynq_cse_nand_defconfig index 1d8e5f6fd0a..f7b75812b43 100644 --- a/configs/zynq_cse_nand_defconfig +++ b/configs/zynq_cse_nand_defconfig @@ -13,6 +13,8 @@ CONFIG_DEFAULT_DEVICE_TREE="zynq-cse-nand" CONFIG_SPL_STACK_R_ADDR=0x200000 CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL=y +# CONFIG_SPL_FS_FAT is not set +# CONFIG_SPL_LIBDISK_SUPPORT is not set CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig index db7cb632d54..2a50f38998b 100644 --- a/configs/zynq_cse_nor_defconfig +++ b/configs/zynq_cse_nor_defconfig @@ -13,6 +13,8 @@ CONFIG_DEFAULT_DEVICE_TREE="zynq-cse-nor" CONFIG_SPL_STACK_R_ADDR=0x200000 CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL=y +# CONFIG_SPL_FS_FAT is not set +# CONFIG_SPL_LIBDISK_SUPPORT is not set CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_REMAKE_ELF=y CONFIG_SYS_CUSTOM_LDSCRIPT=y diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig index dcb22ed3641..db1fc532d15 100644 --- a/configs/zynq_cse_qspi_defconfig +++ b/configs/zynq_cse_qspi_defconfig @@ -16,6 +16,8 @@ CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0x0 CONFIG_DEBUG_UART_CLOCK=0 +# CONFIG_SPL_FS_FAT is not set +# CONFIG_SPL_LIBDISK_SUPPORT is not set # CONFIG_ZYNQ_DDRC_INIT is not set # CONFIG_CMD_ZYNQ is not set CONFIG_SYS_LOAD_ADDR=0x0 diff --git a/doc/android/bcb.rst b/doc/android/bcb.rst index 88616083005..2226517d39f 100644 --- a/doc/android/bcb.rst +++ b/doc/android/bcb.rst @@ -41,23 +41,25 @@ requirements enumerated above. Below is the command's help message:: bcb - Load/set/clear/test/dump/store Android BCB fields Usage: - bcb load <dev> <part> - load BCB from mmc <dev>:<part> - bcb set <field> <val> - set BCB <field> to <val> - bcb clear [<field>] - clear BCB <field> or all fields - bcb test <field> <op> <val> - test BCB <field> against <val> - bcb dump <field> - dump BCB <field> - bcb store - store BCB back to mmc + bcb load <interface> <dev> <part> - load BCB from <interface> <dev>:<part> + load <dev> <part> - load BCB from mmc <dev>:<part> + bcb set <field> <val> - set BCB <field> to <val> + bcb clear [<field>] - clear BCB <field> or all fields + bcb test <field> <op> <val> - test BCB <field> against <val> + bcb dump <field> - dump BCB <field> + bcb store - store BCB back to <interface> Legend: - <dev> - MMC device index containing the BCB partition - <part> - MMC partition index or name containing the BCB - <field> - one of {command,status,recovery,stage,reserved} - <op> - the binary operator used in 'bcb test': - '=' returns true if <val> matches the string stored in <field> - '~' returns true if <val> matches a subset of <field>'s string - <val> - string/text provided as input to bcb {set,test} - NOTE: any ':' character in <val> will be replaced by line feed - during 'bcb set' and used as separator by upper layers + <interface> - storage device interface (virtio, mmc, etc) + <dev> - storage device index containing the BCB partition + <part> - partition index or name containing the BCB + <field> - one of {command,status,recovery,stage,reserved} + <op> - the binary operator used in 'bcb test': + '=' returns true if <val> matches the string stored in <field> + '~' returns true if <val> matches a subset of <field>'s string + <val> - string/text provided as input to bcb {set,test} + NOTE: any ':' character in <val> will be replaced by line feed + during 'bcb set' and used as separator by upper layers 'bcb'. Example of getting reboot reason @@ -91,7 +93,7 @@ The following Kconfig options must be enabled:: CONFIG_PARTITIONS=y CONFIG_MMC=y - CONFIG_BCB=y + CONFIG_CMD_BCB=y .. [1] https://android.googlesource.com/platform/bootable/recovery .. [2] https://source.android.com/devices/bootloader diff --git a/doc/develop/uefi/uefi.rst b/doc/develop/uefi/uefi.rst index fb16ac743a0..6bc9d92285b 100644 --- a/doc/develop/uefi/uefi.rst +++ b/doc/develop/uefi/uefi.rst @@ -642,6 +642,40 @@ UEFI variables. Booting according to these variables is possible via:: As of U-Boot v2020.10 UEFI variables cannot be set at runtime. The U-Boot command 'efidebug' can be used to set the variables. +UEFI HTTP Boot +~~~~~~~~~~~~~~ + +HTTP Boot provides the capability for system deployment and configuration +over the network. HTTP Boot can be activated by specifying:: + + CONFIG_EFI_HTTP_BOOT + +Enabling that will automatically select:: + + CONFIG_CMD_DNS + CONFIG_CMD_WGET + CONFIG_BLKMAP + +Set up the load option specifying the target URI:: + + efidebug boot add -u 1 netinst http://foo/bar + +When this load option is selected as boot selection, resolve the +host ip address by dns, then download the file with wget. +If the downloaded file extension is .iso or .img file, efibootmgr tries to +mount the image and boot with the default file(e.g. EFI/BOOT/BOOTAA64.EFI). +If the downloaded file is PE-COFF image, load the downloaded file and +start it. + +The current implementation tries to resolve the IP address as a host name. +If the uri is like "http://192.168.1.1/foobar", +the dns process tries to resolve the host "192.168.1.1" and it will +end up with "host not found". + +We need to preset the "httpserverip" environment variable to proceed the wget:: + + setenv httpserverip 192.168.1.1 + Executing the built in hello world application ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/doc/device-tree-bindings/nand/sandbox,nand.txt b/doc/device-tree-bindings/nand/sandbox,nand.txt new file mode 100644 index 00000000000..0a723d7c058 --- /dev/null +++ b/doc/device-tree-bindings/nand/sandbox,nand.txt @@ -0,0 +1,57 @@ +Sandbox NAND +============ + +The sandbox NAND controller emulates a NAND controller and attached devices. + +Required properties: +- compatible: "sandbox,nand" +- #address-cells: Must be 1 +- #size-cells: Must be 0 + +Any number of child nodes may be present, each representing a NAND device: + +Required Properties: +- reg: The chip-select(s) to use. Only single-die devices are supported for now. +- sandbox,id: An array of bytes to be reported by the READID (0x90) command +- sandbox,erasesize: The block size (erase size) of the device, in bytes. Must + be a power-of-two multiple of the page size. +- sandbox,oobsize: The size of the OOB area per page, in bytes. +- sandbox,pagesize: The page size (write size) of the device, in bytes. Must be + a power of two. +- sandbox,pages: The total number of pages in the device. +- sandbox,err-count: Number of bit errors to inject per step. +- sandbox,err-step-size: Size of the step to use when injecting errors, in + bytes. Must evenly divide the page size. + +Optional properties: +- sandbox,onfi: The complete ONFI parameter page, including the CRC. Should be + exactly 256 bytes. +- Any common NAND chip properties as documented by Linux's + Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml + +To match U-Boot's error correction capabilities, errors are only injected into +the data area and the ECC codes. Other data in the OOB area is never corrupted. +Generally, sandbox,err-step-size should be the same as the ECC step size, and +sandbox,err-count should be less than the number of correctable bit errors (the +ECC strength). + +Example +------- + +nand-controller { + #address-cells = <1>; + #size-cells = <0>; + compatible = "sandbox,nand"; + + nand@0 { + reg = <0>; + nand-ecc-mode = "soft"; + sandbox,id = [00 e3]; + sandbox,erasesize = <(8 * 1024)>; + sandbox,oobsize = <16>; + sandbox,pagesize = <512>; + sandbox,pages = <0x2000>; + sandbox,err-count = <1>; + sandbox,err-step-size = <512>; + }; +}; diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 049f7efd10b..9bc5283c268 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -20,14 +20,6 @@ config SATA See also CMD_SATA which provides command-line support. -config SYS_SATA_MAX_PORTS - int "Maximum supported SATA ports" - depends on SCSI_AHCI && !DM_SCSI - default 1 - help - Sets the maximum number of ports to scan when looking for devices. - Ports from 0 to (this value - 1) are scanned. - config LIBATA bool help @@ -44,7 +36,7 @@ menu "SATA/SCSI device support" config AHCI_PCI bool "Support for PCI-based AHCI controller" depends on PCI - depends on DM_SCSI + depends on SCSI depends on SCSI_AHCI help Enables support for the PCI-based AHCI controller. @@ -55,13 +47,13 @@ config SPL_AHCI_PCI bool "Support for PCI-based AHCI controller for SPL" depends on SPL depends on SPL_PCI - depends on SPL_SATA && DM_SCSI + depends on SPL_SATA && SCSI config DWC_AHCI bool "Enable Synopsys DWC AHCI driver support" select SCSI_AHCI select PHY - depends on DM_SCSI + depends on SCSI help Enable this driver to support Sata devices through Synopsys DWC AHCI module. @@ -91,7 +83,7 @@ config AHCI_MVEBU bool "Marvell EBU AHCI SATA support" depends on ARCH_MVEBU || ARCH_OCTEON select SCSI_AHCI - select DM_SCSI + select SCSI help This option enables support for the Marvell EBU SoC's onboard AHCI SATA. @@ -112,7 +104,7 @@ if SATA config SATA_CEVA bool "Ceva Sata controller" depends on AHCI - depends on DM_SCSI + depends on SCSI help This option enables Ceva Sata controller hard IP available on Xilinx ZynqMP. Support up to 2 external devices. Compliant with SATA 3.1 and diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 0b6f91098a3..af6f0bf2780 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_SATA) += sata.o sata_bootdev.o obj-$(CONFIG_SATA_CEVA) += sata_ceva.o obj-$(CONFIG_SATA_MV) += sata_mv.o obj-$(CONFIG_SATA_SIL) += sata_sil.o -obj-$(CONFIG_SANDBOX) += sata_sandbox.o obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o obj-$(CONFIG_SUNXI_AHCI) += ahci_sunxi.o obj-$(CONFIG_MTK_AHCI) += mtk_ahci.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index cb2c648a91f..04ddc339464 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -33,10 +33,6 @@ static int ata_io_flush(struct ahci_uc_priv *uc_priv, u8 port); -#ifndef CONFIG_DM_SCSI -struct ahci_uc_priv *probe_ent = NULL; -#endif - #define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0) /* @@ -169,11 +165,6 @@ int ahci_reset(void __iomem *base) static int ahci_host_init(struct ahci_uc_priv *uc_priv) { -#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI) - struct udevice *dev = uc_priv->dev; - struct pci_child_plat *pplat = dev_get_parent_plat(dev); - u16 tmp16; -#endif void __iomem *mmio = uc_priv->mmio_base; u32 tmp, cap_save, cmd; int i, j, ret; @@ -194,14 +185,6 @@ static int ahci_host_init(struct ahci_uc_priv *uc_priv) writel(cap_save, mmio + HOST_CAP); writel_with_flush(0xf, mmio + HOST_PORTS_IMPL); -#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI) - if (pplat->vendor == PCI_VENDOR_ID_INTEL) { - u16 tmp16; - - dm_pci_read_config16(dev, 0x92, &tmp16); - dm_pci_write_config16(dev, 0x92, tmp16 | 0xf); - } -#endif uc_priv->cap = readl(mmio + HOST_CAP); uc_priv->port_map = readl(mmio + HOST_PORTS_IMPL); port_map = uc_priv->port_map; @@ -210,11 +193,6 @@ static int ahci_host_init(struct ahci_uc_priv *uc_priv) debug("cap 0x%x port_map 0x%x n_ports %d\n", uc_priv->cap, uc_priv->port_map, uc_priv->n_ports); -#if !defined(CONFIG_DM_SCSI) - if (uc_priv->n_ports > CONFIG_SYS_SATA_MAX_PORTS) - uc_priv->n_ports = CONFIG_SYS_SATA_MAX_PORTS; -#endif - for (i = 0; i < uc_priv->n_ports; i++) { if (!(port_map & (1 << i))) continue; @@ -313,23 +291,12 @@ static int ahci_host_init(struct ahci_uc_priv *uc_priv) writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); tmp = readl(mmio + HOST_CTL); debug("HOST_CTL 0x%x\n", tmp); -#if !defined(CONFIG_DM_SCSI) -#ifndef CONFIG_SCSI_AHCI_PLAT - dm_pci_read_config16(dev, PCI_COMMAND, &tmp16); - tmp |= PCI_COMMAND_MASTER; - dm_pci_write_config16(dev, PCI_COMMAND, tmp16); -#endif -#endif return 0; } static void ahci_print_info(struct ahci_uc_priv *uc_priv) { -#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI) - struct udevice *dev = uc_priv->dev; - u16 cc; -#endif void __iomem *mmio = uc_priv->mmio_base; u32 vers, cap, cap2, impl, speed; const char *speed_s; @@ -350,19 +317,7 @@ static void ahci_print_info(struct ahci_uc_priv *uc_priv) else speed_s = "?"; -#if defined(CONFIG_SCSI_AHCI_PLAT) || defined(CONFIG_DM_SCSI) scc_s = "SATA"; -#else - dm_pci_read_config16(dev, 0x0a, &cc); - if (cc == 0x0101) - scc_s = "IDE"; - else if (cc == 0x0106) - scc_s = "SATA"; - else if (cc == 0x0104) - scc_s = "RAID"; - else - scc_s = "unknown"; -#endif printf("AHCI %02x%02x.%02x%02x " "%u slots %u ports %s Gbps 0x%x impl %s mode\n", (vers >> 24) & 0xff, @@ -397,12 +352,8 @@ static void ahci_print_info(struct ahci_uc_priv *uc_priv) cap2 & (1 << 0) ? "boh " : ""); } -#if defined(CONFIG_DM_SCSI) || !defined(CONFIG_SCSI_AHCI_PLAT) static int ahci_init_one(struct ahci_uc_priv *uc_priv, struct udevice *dev) { -#if !defined(CONFIG_DM_SCSI) - u16 vendor; -#endif int rc; uc_priv->dev = dev; @@ -415,21 +366,8 @@ static int ahci_init_one(struct ahci_uc_priv *uc_priv, struct udevice *dev) uc_priv->pio_mask = 0x1f; uc_priv->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ -#if !defined(CONFIG_DM_SCSI) - uc_priv->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5, 0, 0, - PCI_REGION_TYPE, PCI_REGION_MEM); - - /* Take from kernel: - * JMicron-specific fixup: - * make sure we're in AHCI mode - */ - dm_pci_read_config16(dev, PCI_VENDOR_ID, &vendor); - if (vendor == 0x197b) - dm_pci_write_config8(dev, 0x41, 0xa1); -#else struct scsi_plat *plat = dev_get_uclass_plat(dev); uc_priv->mmio_base = (void *)plat->base; -#endif debug("ahci mmio_base=0x%p\n", uc_priv->mmio_base); /* initialize adapter */ @@ -444,7 +382,6 @@ static int ahci_init_one(struct ahci_uc_priv *uc_priv, struct udevice *dev) err_out: return rc; } -#endif #define MAX_DATA_BYTE_COUNT (4*1024*1024) @@ -893,12 +830,7 @@ static int ata_scsiop_test_unit_ready(struct ahci_uc_priv *uc_priv, static int ahci_scsi_exec(struct udevice *dev, struct scsi_cmd *pccb) { - struct ahci_uc_priv *uc_priv; -#ifdef CONFIG_DM_SCSI - uc_priv = dev_get_uclass_priv(dev->parent); -#else - uc_priv = probe_ent; -#endif + struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev->parent); int ret; switch (pccb->cmd[0]) { @@ -953,41 +885,12 @@ static int ahci_start_ports(struct ahci_uc_priv *uc_priv) return 0; } -#ifndef CONFIG_DM_SCSI -void scsi_low_level_init(int busdevfunc) -{ - struct ahci_uc_priv *uc_priv; - -#ifndef CONFIG_SCSI_AHCI_PLAT - probe_ent = calloc(1, sizeof(struct ahci_uc_priv)); - if (!probe_ent) { - printf("%s: No memory for uc_priv\n", __func__); - return; - } - uc_priv = probe_ent; - struct udevice *dev; - int ret; - - ret = dm_pci_bus_find_bdf(busdevfunc, &dev); - if (ret) - return; - ahci_init_one(uc_priv, dev); -#else - uc_priv = probe_ent; -#endif - - ahci_start_ports(uc_priv); -} -#endif - -#ifndef CONFIG_SCSI_AHCI_PLAT int ahci_init_one_dm(struct udevice *dev) { struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev); return ahci_init_one(uc_priv, dev); } -#endif int ahci_start_ports_dm(struct udevice *dev) { @@ -996,65 +899,6 @@ int ahci_start_ports_dm(struct udevice *dev) return ahci_start_ports(uc_priv); } -#ifdef CONFIG_SCSI_AHCI_PLAT -static int ahci_init_common(struct ahci_uc_priv *uc_priv, void __iomem *base) -{ - int rc; - - uc_priv->host_flags = ATA_FLAG_SATA - | ATA_FLAG_NO_LEGACY - | ATA_FLAG_MMIO - | ATA_FLAG_PIO_DMA - | ATA_FLAG_NO_ATAPI; - uc_priv->pio_mask = 0x1f; - uc_priv->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ - - uc_priv->mmio_base = base; - - /* initialize adapter */ - rc = ahci_host_init(uc_priv); - if (rc) - goto err_out; - - ahci_print_info(uc_priv); - - rc = ahci_start_ports(uc_priv); - -err_out: - return rc; -} - -#ifndef CONFIG_DM_SCSI -int ahci_init(void __iomem *base) -{ - struct ahci_uc_priv *uc_priv; - - probe_ent = malloc(sizeof(struct ahci_uc_priv)); - if (!probe_ent) { - printf("%s: No memory for uc_priv\n", __func__); - return -ENOMEM; - } - - uc_priv = probe_ent; - memset(uc_priv, 0, sizeof(struct ahci_uc_priv)); - - return ahci_init_common(uc_priv, base); -} -#endif - -int ahci_init_dm(struct udevice *dev, void __iomem *base) -{ - struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev); - - return ahci_init_common(uc_priv, base); -} - -void __weak scsi_init(void) -{ -} - -#endif /* CONFIG_SCSI_AHCI_PLAT */ - /* * In the general case of generic rotating media it makes sense to have a * flush capability. It probably even makes sense in the case of SSDs because @@ -1098,7 +942,6 @@ static int ahci_scsi_bus_reset(struct udevice *dev) return 0; } -#ifdef CONFIG_DM_SCSI int ahci_bind_scsi(struct udevice *ahci_dev, struct udevice **devp) { struct udevice *dev; @@ -1190,16 +1033,3 @@ U_BOOT_DRIVER(ahci_scsi) = { .id = UCLASS_SCSI, .ops = &scsi_ops, }; -#else -int scsi_exec(struct udevice *dev, struct scsi_cmd *pccb) -{ - return ahci_scsi_exec(dev, pccb); -} - -__weak int scsi_bus_reset(struct udevice *dev) -{ - return ahci_scsi_bus_reset(dev); - - return 0; -} -#endif diff --git a/drivers/ata/sata.c b/drivers/ata/sata.c index 64fc078bada..784d9bbeacb 100644 --- a/drivers/ata/sata.c +++ b/drivers/ata/sata.c @@ -18,10 +18,6 @@ #include <dm/device-internal.h> #include <dm/uclass-internal.h> -#ifndef CONFIG_AHCI -struct blk_desc sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE]; -#endif - int sata_reset(struct udevice *dev) { struct ahci_ops *ops = ahci_get_ops(dev); @@ -88,15 +84,6 @@ int sata_rescan(bool verbose) return ret; } -#ifndef CONFIG_AHCI -#ifdef CONFIG_PARTITIONS -struct blk_desc *sata_get_dev(int dev) -{ - return (dev < CONFIG_SYS_SATA_MAX_DEVICE) ? &sata_dev_desc[dev] : NULL; -} -#endif -#endif - static unsigned long sata_bread(struct udevice *dev, lbaint_t start, lbaint_t blkcnt, void *dst) { @@ -109,51 +96,6 @@ static unsigned long sata_bwrite(struct udevice *dev, lbaint_t start, return -ENOSYS; } -#ifndef CONFIG_AHCI -int __sata_initialize(void) -{ - int rc, ret = -1; - int i; - - for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; i++) { - memset(&sata_dev_desc[i], 0, sizeof(struct blk_desc)); - sata_dev_desc[i].uclass_id = UCLASS_AHCI; - sata_dev_desc[i].devnum = i; - sata_dev_desc[i].part_type = PART_TYPE_UNKNOWN; - sata_dev_desc[i].type = DEV_TYPE_HARDDISK; - sata_dev_desc[i].lba = 0; - sata_dev_desc[i].blksz = 512; - sata_dev_desc[i].log2blksz = LOG2(sata_dev_desc[i].blksz); - rc = init_sata(i); - if (!rc) { - rc = scan_sata(i); - if (!rc && sata_dev_desc[i].lba > 0 && - sata_dev_desc[i].blksz > 0) { - part_init(&sata_dev_desc[i]); - ret = i; - } - } - } - - return ret; -} -int sata_initialize(void) __attribute__((weak, alias("__sata_initialize"))); - -__weak int __sata_stop(void) -{ - int i, err = 0; - - for (i = 0; i < CONFIG_SYS_SATA_MAX_DEVICE; i++) - err |= reset_sata(i); - - if (err) - printf("Could not reset some SATA devices\n"); - - return err; -} -int sata_stop(void) __attribute__((weak, alias("__sata_stop"))); -#endif - static const struct blk_ops sata_blk_ops = { .read = sata_bread, .write = sata_bwrite, diff --git a/drivers/ata/sata_sandbox.c b/drivers/ata/sata_sandbox.c deleted file mode 100644 index e64cc4a5c10..00000000000 --- a/drivers/ata/sata_sandbox.c +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2015 Google, Inc - * Written by Simon Glass <sjg@chromium.org> - */ - -#include <common.h> -#include <blk.h> - -int init_sata(int dev) -{ - return 0; -} - -int reset_sata(int dev) -{ - return 0; -} - -int scan_sata(int dev) -{ - return 0; -} - -ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer) -{ - return 0; -} - -ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer) -{ - return 0; -} diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 048a6caef00..6ad18889f61 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -13,7 +13,7 @@ config BLK config SPL_LEGACY_BLOCK bool # "Enable Legacy Block Device" - depends on SPL && !DM_SPL + depends on SPL default y if SPL_MMC || SPL_USB_STORAGE || SCSI || NVME || IDE default y if SPL_AHCI_PCI help @@ -265,6 +265,7 @@ config SYS_64BIT_LBA config RKMTD bool "Rockchip rkmtd virtual block device" + select RANDOM_UUID help Enable "rkmtd" class and driver to create a virtual block device to transfer Rockchip boot block data to and from NAND with block diff --git a/drivers/block/Makefile b/drivers/block/Makefile index fdcba5c8318..fe6a1fcf486 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -15,7 +15,8 @@ obj-$(CONFIG_RKMTD) += rkmtd.o endif obj-$(CONFIG_SANDBOX) += sandbox.o host-uclass.o host_dev.o obj-$(CONFIG_$(SPL_TPL_)BLOCK_CACHE) += blkcache.o -obj-$(CONFIG_BLKMAP) += blkmap.o +obj-$(CONFIG_$(SPL_TPL_)BLKMAP) += blkmap.o +obj-$(CONFIG_$(SPL_TPL_)BLKMAP) += blkmap_helper.o obj-$(CONFIG_EFI_MEDIA) += efi-media-uclass.o obj-$(CONFIG_EFI_MEDIA_SANDBOX) += sb_efi_media.o diff --git a/drivers/block/blkmap.c b/drivers/block/blkmap.c index 149a4cac3ea..21201409ed4 100644 --- a/drivers/block/blkmap.c +++ b/drivers/block/blkmap.c @@ -66,21 +66,6 @@ struct blkmap_slice { void (*destroy)(struct blkmap *bm, struct blkmap_slice *bms); }; -/** - * struct blkmap - Block map - * - * Data associated with a blkmap. - * - * @label: Human readable name of this blkmap - * @blk: Underlying block device - * @slices: List of slices associated with this blkmap - */ -struct blkmap { - char *label; - struct udevice *blk; - struct list_head slices; -}; - static bool blkmap_slice_contains(struct blkmap_slice *bms, lbaint_t blknr) { return (blknr >= bms->blknr) && (blknr < (bms->blknr + bms->blkcnt)); diff --git a/drivers/block/blkmap_helper.c b/drivers/block/blkmap_helper.c new file mode 100644 index 00000000000..bfba14110d2 --- /dev/null +++ b/drivers/block/blkmap_helper.c @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * blkmap helper function + * + * Copyright (c) 2023, Linaro Limited + */ + +#include <blk.h> +#include <blkmap.h> +#include <dm/device.h> +#include <dm/device-internal.h> + +int blkmap_create_ramdisk(const char *label, ulong image_addr, ulong image_size, + struct udevice **devp) +{ + int ret; + lbaint_t blknum; + struct blkmap *bm; + struct blk_desc *desc; + struct udevice *bm_dev; + + ret = blkmap_create(label, &bm_dev); + if (ret) { + log_err("failed to create blkmap\n"); + return ret; + } + + bm = dev_get_plat(bm_dev); + desc = dev_get_uclass_plat(bm->blk); + blknum = image_size >> desc->log2blksz; + ret = blkmap_map_pmem(bm_dev, 0, blknum, image_addr); + if (ret) { + log_err("Unable to map %#llx at block %d : %d\n", + (unsigned long long)image_addr, 0, ret); + goto err; + } + log_info("Block %d+0x" LBAF " mapped to %#llx\n", 0, blknum, + (unsigned long long)image_addr); + + ret = device_probe(bm->blk); + if (ret) + goto err; + + if (devp) + *devp = bm_dev; + + return 0; + +err: + blkmap_destroy(bm_dev); + + return ret; +} diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c index b52d926f339..025c7a7aa26 100644 --- a/drivers/clk/at91/clk-main.c +++ b/drivers/clk/at91/clk-main.c @@ -17,6 +17,7 @@ #include <linux/clk/at91_pmc.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/time.h> #include "pmc.h" #define UBOOT_DM_CLK_AT91_MAIN_RC "at91-main-rc-clk" @@ -25,7 +26,6 @@ #define UBOOT_DM_CLK_AT91_SAM9X5_MAIN "at91-sam9x5-main-clk" #define MOR_KEY_MASK GENMASK(23, 16) -#define USEC_PER_SEC 1000000UL #define SLOW_CLOCK_FREQ 32768 #define clk_main_parent_select(s) (((s) & \ diff --git a/drivers/clk/clk_k210.c b/drivers/clk/clk_k210.c index c534cc07e09..b9469b93853 100644 --- a/drivers/clk/clk_k210.c +++ b/drivers/clk/clk_k210.c @@ -16,6 +16,7 @@ #include <dt-bindings/mfd/k210-sysctl.h> #include <k210/pll.h> #include <linux/bitfield.h> +#include <asm/barrier.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index 737d4590d5b..1081d61fcf0 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -87,7 +87,7 @@ config DM_STATS config SPL_DM_STATS bool "Collect and show driver model stats in SPL" - depends on DM_SPL + depends on SPL_DM help Enable this to collect and display memory statistics about driver model. This can help to figure out where all the memory is going and diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig index 4e80e85d10d..8771678ca5a 100644 --- a/drivers/dfu/Kconfig +++ b/drivers/dfu/Kconfig @@ -19,6 +19,7 @@ config DFU_WRITE_ALT config DFU_TFTP bool "DFU via TFTP" + depends on NETDEVICES select UPDATE_COMMON select DFU_OVER_TFTP help diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 0af54604211..3c64e894646 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -87,7 +87,6 @@ endif config DMA_LEGACY bool "Legacy DMA support" - default y if FSLDMAFEC help Enable legacy DMA support. This does not use driver model and should be migrated to the new API. diff --git a/drivers/dma/MCD_dmaApi.c b/drivers/dma/MCD_dmaApi.c deleted file mode 100644 index af0e1345220..00000000000 --- a/drivers/dma/MCD_dmaApi.c +++ /dev/null @@ -1,1010 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - */ - -/*Main C file for multi-channel DMA API. */ - -#include <common.h> - -#include <MCD_dma.h> -#include <MCD_tasksInit.h> -#include <MCD_progCheck.h> - -/********************************************************************/ -/* This is an API-internal pointer to the DMA's registers */ -dmaRegs *MCD_dmaBar; - -/* - * These are the real and model task tables as generated by the - * build process - */ -extern TaskTableEntry MCD_realTaskTableSrc[NCHANNELS]; -extern TaskTableEntry MCD_modelTaskTableSrc[NUMOFVARIANTS]; - -/* - * However, this (usually) gets relocated to on-chip SRAM, at which - * point we access them as these tables - */ -volatile TaskTableEntry *MCD_taskTable; -TaskTableEntry *MCD_modelTaskTable; - -/* - * MCD_chStatus[] is an array of status indicators for remembering - * whether a DMA has ever been attempted on each channel, pausing - * status, etc. - */ -static int MCD_chStatus[NCHANNELS] = { - MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, - MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, - MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, - MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA, MCD_NO_DMA -}; - -/* Prototypes for local functions */ -static void MCD_memcpy(int *dest, int *src, u32 size); -static void MCD_resmActions(int channel); - -/* - * Buffer descriptors used for storage of progress info for single Dmas - * Also used as storage for the DMA for CRCs for single DMAs - * Otherwise, the DMA does not parse these buffer descriptors - */ -#ifdef MCD_INCLUDE_EU -extern MCD_bufDesc MCD_singleBufDescs[NCHANNELS]; -#else -MCD_bufDesc MCD_singleBufDescs[NCHANNELS]; -#endif -MCD_bufDesc *MCD_relocBuffDesc; - -/* Defines for the debug control register's functions */ -#define DBG_CTL_COMP1_TASK (0x00002000) -#define DBG_CTL_ENABLE (DBG_CTL_AUTO_ARM | \ - DBG_CTL_BREAK | \ - DBG_CTL_INT_BREAK | \ - DBG_CTL_COMP1_TASK) -#define DBG_CTL_DISABLE (DBG_CTL_AUTO_ARM | \ - DBG_CTL_INT_BREAK | \ - DBG_CTL_COMP1_TASK) -#define DBG_KILL_ALL_STAT (0xFFFFFFFF) - -/* Offset to context save area where progress info is stored */ -#define CSAVE_OFFSET 10 - -/* Defines for Byte Swapping */ -#define MCD_BYTE_SWAP_KILLER 0xFFF8888F -#define MCD_NO_BYTE_SWAP_ATALL 0x00040000 - -/* Execution Unit Identifiers */ -#define MAC 0 /* legacy - not used */ -#define LUAC 1 /* legacy - not used */ -#define CRC 2 /* legacy - not used */ -#define LURC 3 /* Logic Unit with CRC */ - -/* Task Identifiers */ -#define TASK_CHAINNOEU 0 -#define TASK_SINGLENOEU 1 -#ifdef MCD_INCLUDE_EU -#define TASK_CHAINEU 2 -#define TASK_SINGLEEU 3 -#define TASK_FECRX 4 -#define TASK_FECTX 5 -#else -#define TASK_CHAINEU 0 -#define TASK_SINGLEEU 1 -#define TASK_FECRX 2 -#define TASK_FECTX 3 -#endif - -/* - * Structure to remember which variant is on which channel - * TBD- need this? - */ -typedef struct MCD_remVariants_struct MCD_remVariant; -struct MCD_remVariants_struct { - int remDestRsdIncr[NCHANNELS]; /* -1,0,1 */ - int remSrcRsdIncr[NCHANNELS]; /* -1,0,1 */ - s16 remDestIncr[NCHANNELS]; /* DestIncr */ - s16 remSrcIncr[NCHANNELS]; /* srcIncr */ - u32 remXferSize[NCHANNELS]; /* xferSize */ -}; - -/* Structure to remember the startDma parameters for each channel */ -MCD_remVariant MCD_remVariants; -/********************************************************************/ -/* Function: MCD_initDma - * Purpose: Initializes the DMA API by setting up a pointer to the DMA - * registers, relocating and creating the appropriate task - * structures, and setting up some global settings - * Arguments: - * dmaBarAddr - pointer to the multichannel DMA registers - * taskTableDest - location to move DMA task code and structs to - * flags - operational parameters - * Return Value: - * MCD_TABLE_UNALIGNED if taskTableDest is not 512-byte aligned - * MCD_OK otherwise - */ -extern u32 MCD_funcDescTab0[]; - -int MCD_initDma(dmaRegs * dmaBarAddr, void *taskTableDest, u32 flags) -{ - int i; - TaskTableEntry *entryPtr; - - /* setup the local pointer to register set */ - MCD_dmaBar = dmaBarAddr; - - /* do we need to move/create a task table */ - if ((flags & MCD_RELOC_TASKS) != 0) { - int fixedSize; - u32 *fixedPtr; - /*int *tablePtr = taskTableDest;TBD */ - int varTabsOffset, funcDescTabsOffset, contextSavesOffset; - int taskDescTabsOffset; - int taskTableSize, varTabsSize, funcDescTabsSize, - contextSavesSize; - int taskDescTabSize; - - int i; - - /* check if physical address is aligned on 512 byte boundary */ - if (((u32) taskTableDest & 0x000001ff) != 0) - return (MCD_TABLE_UNALIGNED); - - /* set up local pointer to task Table */ - MCD_taskTable = taskTableDest; - - /* - * Create a task table: - * - compute aligned base offsets for variable tables and - * function descriptor tables, then - * - loop through the task table and setup the pointers - * - copy over model task table with the the actual task - * descriptor tables - */ - - taskTableSize = NCHANNELS * sizeof(TaskTableEntry); - /* align variable tables to size */ - varTabsOffset = taskTableSize + (u32) taskTableDest; - if ((varTabsOffset & (VAR_TAB_SIZE - 1)) != 0) - varTabsOffset = - (varTabsOffset + VAR_TAB_SIZE) & (~VAR_TAB_SIZE); - /* align function descriptor tables */ - varTabsSize = NCHANNELS * VAR_TAB_SIZE; - funcDescTabsOffset = varTabsOffset + varTabsSize; - - if ((funcDescTabsOffset & (FUNCDESC_TAB_SIZE - 1)) != 0) - funcDescTabsOffset = - (funcDescTabsOffset + - FUNCDESC_TAB_SIZE) & (~FUNCDESC_TAB_SIZE); - - funcDescTabsSize = FUNCDESC_TAB_NUM * FUNCDESC_TAB_SIZE; - contextSavesOffset = funcDescTabsOffset + funcDescTabsSize; - contextSavesSize = (NCHANNELS * CONTEXT_SAVE_SIZE); - fixedSize = - taskTableSize + varTabsSize + funcDescTabsSize + - contextSavesSize; - - /* zero the thing out */ - fixedPtr = (u32 *) taskTableDest; - for (i = 0; i < (fixedSize / 4); i++) - fixedPtr[i] = 0; - - entryPtr = (TaskTableEntry *) MCD_taskTable; - /* set up fixed pointers */ - for (i = 0; i < NCHANNELS; i++) { - /* update ptr to local value */ - entryPtr[i].varTab = (u32) varTabsOffset; - entryPtr[i].FDTandFlags = - (u32) funcDescTabsOffset | MCD_TT_FLAGS_DEF; - entryPtr[i].contextSaveSpace = (u32) contextSavesOffset; - varTabsOffset += VAR_TAB_SIZE; -#ifdef MCD_INCLUDE_EU - /* if not there is only one, just point to the - same one */ - funcDescTabsOffset += FUNCDESC_TAB_SIZE; -#endif - contextSavesOffset += CONTEXT_SAVE_SIZE; - } - /* copy over the function descriptor table */ - for (i = 0; i < FUNCDESC_TAB_NUM; i++) { - MCD_memcpy((void *)(entryPtr[i]. - FDTandFlags & ~MCD_TT_FLAGS_MASK), - (void *)MCD_funcDescTab0, FUNCDESC_TAB_SIZE); - } - - /* copy model task table to where the context saves stuff - leaves off */ - MCD_modelTaskTable = (TaskTableEntry *) contextSavesOffset; - - MCD_memcpy((void *)MCD_modelTaskTable, - (void *)MCD_modelTaskTableSrc, - NUMOFVARIANTS * sizeof(TaskTableEntry)); - - /* point to local version of model task table */ - entryPtr = MCD_modelTaskTable; - taskDescTabsOffset = (u32) MCD_modelTaskTable + - (NUMOFVARIANTS * sizeof(TaskTableEntry)); - - /* copy actual task code and update TDT ptrs in local - model task table */ - for (i = 0; i < NUMOFVARIANTS; i++) { - taskDescTabSize = - entryPtr[i].TDTend - entryPtr[i].TDTstart + 4; - MCD_memcpy((void *)taskDescTabsOffset, - (void *)entryPtr[i].TDTstart, - taskDescTabSize); - entryPtr[i].TDTstart = (u32) taskDescTabsOffset; - taskDescTabsOffset += taskDescTabSize; - entryPtr[i].TDTend = (u32) taskDescTabsOffset - 4; - } -#ifdef MCD_INCLUDE_EU - /* Tack single DMA BDs onto end of code so API controls - where they are since DMA might write to them */ - MCD_relocBuffDesc = - (MCD_bufDesc *) (entryPtr[NUMOFVARIANTS - 1].TDTend + 4); -#else - /* DMA does not touch them so they can be wherever and we - don't need to waste SRAM on them */ - MCD_relocBuffDesc = MCD_singleBufDescs; -#endif - } else { - /* point the would-be relocated task tables and the - buffer descriptors to the ones the linker generated */ - - if (((u32) MCD_realTaskTableSrc & 0x000001ff) != 0) - return (MCD_TABLE_UNALIGNED); - - /* need to add code to make sure that every thing else is - aligned properly TBD. this is problematic if we init - more than once or after running tasks, need to add - variable to see if we have aleady init'd */ - entryPtr = MCD_realTaskTableSrc; - for (i = 0; i < NCHANNELS; i++) { - if (((entryPtr[i].varTab & (VAR_TAB_SIZE - 1)) != 0) || - ((entryPtr[i]. - FDTandFlags & (FUNCDESC_TAB_SIZE - 1)) != 0)) - return (MCD_TABLE_UNALIGNED); - } - - MCD_taskTable = MCD_realTaskTableSrc; - MCD_modelTaskTable = MCD_modelTaskTableSrc; - MCD_relocBuffDesc = MCD_singleBufDescs; - } - - /* Make all channels as totally inactive, and remember them as such: */ - - MCD_dmaBar->taskbar = (u32) MCD_taskTable; - for (i = 0; i < NCHANNELS; i++) { - MCD_dmaBar->taskControl[i] = 0x0; - MCD_chStatus[i] = MCD_NO_DMA; - } - - /* Set up pausing mechanism to inactive state: */ - /* no particular values yet for either comparator registers */ - MCD_dmaBar->debugComp1 = 0; - MCD_dmaBar->debugComp2 = 0; - MCD_dmaBar->debugControl = DBG_CTL_DISABLE; - MCD_dmaBar->debugStatus = DBG_KILL_ALL_STAT; - - /* enable or disable commbus prefetch, really need an ifdef or - something to keep from trying to set this in the 8220 */ - if ((flags & MCD_COMM_PREFETCH_EN) != 0) - MCD_dmaBar->ptdControl &= ~PTD_CTL_COMM_PREFETCH; - else - MCD_dmaBar->ptdControl |= PTD_CTL_COMM_PREFETCH; - - return (MCD_OK); -} - -/*********************** End of MCD_initDma() ***********************/ - -/********************************************************************/ -/* Function: MCD_dmaStatus - * Purpose: Returns the status of the DMA on the requested channel - * Arguments: channel - channel number - * Returns: Predefined status indicators - */ -int MCD_dmaStatus(int channel) -{ - u16 tcrValue; - - if ((channel < 0) || (channel >= NCHANNELS)) - return (MCD_CHANNEL_INVALID); - - tcrValue = MCD_dmaBar->taskControl[channel]; - if ((tcrValue & TASK_CTL_EN) == 0) { /* nothing running */ - /* if last reported with task enabled */ - if (MCD_chStatus[channel] == MCD_RUNNING - || MCD_chStatus[channel] == MCD_IDLE) - MCD_chStatus[channel] = MCD_DONE; - } else { /* something is running */ - - /* There are three possibilities: paused, running or idle. */ - if (MCD_chStatus[channel] == MCD_RUNNING - || MCD_chStatus[channel] == MCD_IDLE) { - MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT; - /* This register is selected to know which initiator is - actually asserted. */ - if ((MCD_dmaBar->ptdDebug >> channel) & 0x1) - MCD_chStatus[channel] = MCD_RUNNING; - else - MCD_chStatus[channel] = MCD_IDLE; - /* do not change the status if it is already paused. */ - } - } - return MCD_chStatus[channel]; -} - -/******************** End of MCD_dmaStatus() ************************/ - -/********************************************************************/ -/* Function: MCD_startDma - * Ppurpose: Starts a particular kind of DMA - * Arguments: - * srcAddr - the channel on which to run the DMA - * srcIncr - the address to move data from, or buffer-descriptor address - * destAddr - the amount to increment the source address per transfer - * destIncr - the address to move data to - * dmaSize - the amount to increment the destination address per transfer - * xferSize - the number bytes in of each data movement (1, 2, or 4) - * initiator - what device initiates the DMA - * priority - priority of the DMA - * flags - flags describing the DMA - * funcDesc - description of byte swapping, bit swapping, and CRC actions - * srcAddrVirt - virtual buffer descriptor address TBD - * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK - */ - -int MCD_startDma(int channel, s8 * srcAddr, s16 srcIncr, s8 * destAddr, - s16 destIncr, u32 dmaSize, u32 xferSize, u32 initiator, - int priority, u32 flags, u32 funcDesc -#ifdef MCD_NEED_ADDR_TRANS - s8 * srcAddrVirt -#endif - ) -{ - int srcRsdIncr, destRsdIncr; - int *cSave; - short xferSizeIncr; - int tcrCount = 0; -#ifdef MCD_INCLUDE_EU - u32 *realFuncArray; -#endif - - if ((channel < 0) || (channel >= NCHANNELS)) - return (MCD_CHANNEL_INVALID); - - /* tbd - need to determine the proper response to a bad funcDesc when - not including EU functions, for now, assign a benign funcDesc, but - maybe should return an error */ -#ifndef MCD_INCLUDE_EU - funcDesc = MCD_FUNC_NOEU1; -#endif - -#ifdef MCD_DEBUG - printf("startDma:Setting up params\n"); -#endif - /* Set us up for task-wise priority. We don't technically need to do - this on every start, but since the register involved is in the same - longword as other registers that users are in control of, setting - it more than once is probably preferable. That since the - documentation doesn't seem to be completely consistent about the - nature of the PTD control register. */ - MCD_dmaBar->ptdControl |= (u16) 0x8000; - - /* Not sure what we need to keep here rtm TBD */ -#if 1 - /* Calculate additional parameters to the regular DMA calls. */ - srcRsdIncr = srcIncr < 0 ? -1 : (srcIncr > 0 ? 1 : 0); - destRsdIncr = destIncr < 0 ? -1 : (destIncr > 0 ? 1 : 0); - - xferSizeIncr = (xferSize & 0xffff) | 0x20000000; - - /* Remember for each channel which variant is running. */ - MCD_remVariants.remSrcRsdIncr[channel] = srcRsdIncr; - MCD_remVariants.remDestRsdIncr[channel] = destRsdIncr; - MCD_remVariants.remDestIncr[channel] = destIncr; - MCD_remVariants.remSrcIncr[channel] = srcIncr; - MCD_remVariants.remXferSize[channel] = xferSize; -#endif - - cSave = - (int *)(MCD_taskTable[channel].contextSaveSpace) + CSAVE_OFFSET + - CURRBD; - -#ifdef MCD_INCLUDE_EU - /* may move this to EU specific calls */ - realFuncArray = - (u32 *) (MCD_taskTable[channel].FDTandFlags & 0xffffff00); - /* Modify the LURC's normal and byte-residue-loop functions according - to parameter. */ - realFuncArray[(LURC * 16)] = xferSize == 4 ? - funcDesc : xferSize == 2 ? - funcDesc & 0xfffff00f : funcDesc & 0xffff000f; - realFuncArray[(LURC * 16 + 1)] = - (funcDesc & MCD_BYTE_SWAP_KILLER) | MCD_NO_BYTE_SWAP_ATALL; -#endif - /* Write the initiator field in the TCR, and also set the - initiator-hold bit. Note that,due to a hardware quirk, this could - collide with an MDE access to the initiator-register file, so we - have to verify that the write reads back correctly. */ - - MCD_dmaBar->taskControl[channel] = - (initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM; - - while (((MCD_dmaBar->taskControl[channel] & 0x1fff) != - ((initiator << 8) | TASK_CTL_HIPRITSKEN | TASK_CTL_HLDINITNUM)) - && (tcrCount < 1000)) { - tcrCount++; - /*MCD_dmaBar->ptd_tcr[channel] = (initiator << 8) | 0x0020; */ - MCD_dmaBar->taskControl[channel] = - (initiator << 8) | TASK_CTL_HIPRITSKEN | - TASK_CTL_HLDINITNUM; - } - - MCD_dmaBar->priority[channel] = (u8) priority & PRIORITY_PRI_MASK; - /* should be albe to handle this stuff with only one write to ts reg - - tbd */ - if (channel < 8 && channel >= 0) { - MCD_dmaBar->taskSize0 &= ~(0xf << (7 - channel) * 4); - MCD_dmaBar->taskSize0 |= - (xferSize & 3) << (((7 - channel) * 4) + 2); - MCD_dmaBar->taskSize0 |= (xferSize & 3) << ((7 - channel) * 4); - } else { - MCD_dmaBar->taskSize1 &= ~(0xf << (15 - channel) * 4); - MCD_dmaBar->taskSize1 |= - (xferSize & 3) << (((15 - channel) * 4) + 2); - MCD_dmaBar->taskSize1 |= (xferSize & 3) << ((15 - channel) * 4); - } - - /* setup task table flags/options which mostly control the line - buffers */ - MCD_taskTable[channel].FDTandFlags &= ~MCD_TT_FLAGS_MASK; - MCD_taskTable[channel].FDTandFlags |= (MCD_TT_FLAGS_MASK & flags); - - if (flags & MCD_FECTX_DMA) { - /* TDTStart and TDTEnd */ - MCD_taskTable[channel].TDTstart = - MCD_modelTaskTable[TASK_FECTX].TDTstart; - MCD_taskTable[channel].TDTend = - MCD_modelTaskTable[TASK_FECTX].TDTend; - MCD_startDmaENetXmit((char *)srcAddr, (char *)srcAddr, - (char *)destAddr, MCD_taskTable, - channel); - } else if (flags & MCD_FECRX_DMA) { - /* TDTStart and TDTEnd */ - MCD_taskTable[channel].TDTstart = - MCD_modelTaskTable[TASK_FECRX].TDTstart; - MCD_taskTable[channel].TDTend = - MCD_modelTaskTable[TASK_FECRX].TDTend; - MCD_startDmaENetRcv((char *)srcAddr, (char *)srcAddr, - (char *)destAddr, MCD_taskTable, - channel); - } else if (flags & MCD_SINGLE_DMA) { - /* this buffer descriptor is used for storing off initial - parameters for later progress query calculation and for the - DMA to write the resulting checksum. The DMA does not use - this to determine how to operate, that info is passed with - the init routine */ - MCD_relocBuffDesc[channel].srcAddr = srcAddr; - MCD_relocBuffDesc[channel].destAddr = destAddr; - - /* definitely not its final value */ - MCD_relocBuffDesc[channel].lastDestAddr = destAddr; - - MCD_relocBuffDesc[channel].dmaSize = dmaSize; - MCD_relocBuffDesc[channel].flags = 0; /* not used */ - MCD_relocBuffDesc[channel].csumResult = 0; /* not used */ - MCD_relocBuffDesc[channel].next = 0; /* not used */ - - /* Initialize the progress-querying stuff to show no - progress: */ - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[SRCPTR + CSAVE_OFFSET] = (int)srcAddr; - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[DESTPTR + CSAVE_OFFSET] = (int)destAddr; - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[DCOUNT + CSAVE_OFFSET] = 0; - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[CURRBD + CSAVE_OFFSET] = -(u32) & (MCD_relocBuffDesc[channel]); - /* tbd - need to keep the user from trying to call the EU - routine when MCD_INCLUDE_EU is not defined */ - if (funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2) { - /* TDTStart and TDTEnd */ - MCD_taskTable[channel].TDTstart = - MCD_modelTaskTable[TASK_SINGLENOEU].TDTstart; - MCD_taskTable[channel].TDTend = - MCD_modelTaskTable[TASK_SINGLENOEU].TDTend; - MCD_startDmaSingleNoEu((char *)srcAddr, srcIncr, - (char *)destAddr, destIncr, - (int)dmaSize, xferSizeIncr, - flags, (int *) - &(MCD_relocBuffDesc[channel]), - cSave, MCD_taskTable, channel); - } else { - /* TDTStart and TDTEnd */ - MCD_taskTable[channel].TDTstart = - MCD_modelTaskTable[TASK_SINGLEEU].TDTstart; - MCD_taskTable[channel].TDTend = - MCD_modelTaskTable[TASK_SINGLEEU].TDTend; - MCD_startDmaSingleEu((char *)srcAddr, srcIncr, - (char *)destAddr, destIncr, - (int)dmaSize, xferSizeIncr, - flags, (int *) - &(MCD_relocBuffDesc[channel]), - cSave, MCD_taskTable, channel); - } - } else { /* chained DMAS */ - /* Initialize the progress-querying stuff to show no - progress: */ -#if 1 - /* (!defined(MCD_NEED_ADDR_TRANS)) */ - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[SRCPTR + CSAVE_OFFSET] - = (int)((MCD_bufDesc *) srcAddr)->srcAddr; - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[DESTPTR + CSAVE_OFFSET] - = (int)((MCD_bufDesc *) srcAddr)->destAddr; -#else - /* if using address translation, need the virtual addr of the - first buffdesc */ - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[SRCPTR + CSAVE_OFFSET] - = (int)((MCD_bufDesc *) srcAddrVirt)->srcAddr; - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[DESTPTR + CSAVE_OFFSET] - = (int)((MCD_bufDesc *) srcAddrVirt)->destAddr; -#endif - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[DCOUNT + CSAVE_OFFSET] = 0; - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[CURRBD + CSAVE_OFFSET] = (u32) srcAddr; - - if (funcDesc == MCD_FUNC_NOEU1 || funcDesc == MCD_FUNC_NOEU2) { - /*TDTStart and TDTEnd */ - MCD_taskTable[channel].TDTstart = - MCD_modelTaskTable[TASK_CHAINNOEU].TDTstart; - MCD_taskTable[channel].TDTend = - MCD_modelTaskTable[TASK_CHAINNOEU].TDTend; - MCD_startDmaChainNoEu((int *)srcAddr, srcIncr, - destIncr, xferSize, - xferSizeIncr, cSave, - MCD_taskTable, channel); - } else { - /*TDTStart and TDTEnd */ - MCD_taskTable[channel].TDTstart = - MCD_modelTaskTable[TASK_CHAINEU].TDTstart; - MCD_taskTable[channel].TDTend = - MCD_modelTaskTable[TASK_CHAINEU].TDTend; - MCD_startDmaChainEu((int *)srcAddr, srcIncr, destIncr, - xferSize, xferSizeIncr, cSave, - MCD_taskTable, channel); - } - } - MCD_chStatus[channel] = MCD_IDLE; - return (MCD_OK); -} - -/************************ End of MCD_startDma() *********************/ - -/********************************************************************/ -/* Function: MCD_XferProgrQuery - * Purpose: Returns progress of DMA on requested channel - * Arguments: channel - channel to retrieve progress for - * progRep - pointer to user supplied MCD_XferProg struct - * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK - * - * Notes: - * MCD_XferProgrQuery() upon completing or after aborting a DMA, or - * while the DMA is in progress, this function returns the first - * DMA-destination address not (or not yet) used in the DMA. When - * encountering a non-ready buffer descriptor, the information for - * the last completed descriptor is returned. - * - * MCD_XferProgQuery() has to avoid the possibility of getting - * partially-updated information in the event that we should happen - * to query DMA progress just as the DMA is updating it. It does that - * by taking advantage of the fact context is not saved frequently for - * the most part. We therefore read it at least twice until we get the - * same information twice in a row. - * - * Because a small, but not insignificant, amount of time is required - * to write out the progress-query information, especially upon - * completion of the DMA, it would be wise to guarantee some time lag - * between successive readings of the progress-query information. - */ - -/* How many iterations of the loop below to execute to stabilize values */ -#define STABTIME 0 - -int MCD_XferProgrQuery(int channel, MCD_XferProg * progRep) -{ - MCD_XferProg prevRep; - int again; /* true if we are to try again to ge - consistent results */ - int i; /* used as a time-waste counter */ - int destDiffBytes; /* Total no of bytes that we think actually - got xfered. */ - int numIterations; /* number of iterations */ - int bytesNotXfered; /* bytes that did not get xfered. */ - s8 *LWAlignedInitDestAddr, *LWAlignedCurrDestAddr; - int subModVal, addModVal; /* Mode values to added and subtracted - from the final destAddr */ - - if ((channel < 0) || (channel >= NCHANNELS)) - return (MCD_CHANNEL_INVALID); - - /* Read a trial value for the progress-reporting values */ - prevRep.lastSrcAddr = - (s8 *) ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[SRCPTR + CSAVE_OFFSET]; - prevRep.lastDestAddr = - (s8 *) ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[DESTPTR + CSAVE_OFFSET]; - prevRep.dmaSize = - ((volatile int *)MCD_taskTable[channel].contextSaveSpace)[DCOUNT + - CSAVE_OFFSET]; - prevRep.currBufDesc = - (MCD_bufDesc *) ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[CURRBD + CSAVE_OFFSET]; - /* Repeatedly reread those values until they match previous values: */ - do { - /* Waste a little bit of time to ensure stability: */ - for (i = 0; i < STABTIME; i++) { - /* make sure this loop does something so that it - doesn't get optimized out */ - i += i >> 2; - } - /* Check them again: */ - progRep->lastSrcAddr = - (s8 *) ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[SRCPTR + CSAVE_OFFSET]; - progRep->lastDestAddr = - (s8 *) ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[DESTPTR + CSAVE_OFFSET]; - progRep->dmaSize = - ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[DCOUNT + CSAVE_OFFSET]; - progRep->currBufDesc = - (MCD_bufDesc *) ((volatile int *)MCD_taskTable[channel]. - contextSaveSpace)[CURRBD + CSAVE_OFFSET]; - /* See if they match: */ - if (prevRep.lastSrcAddr != progRep->lastSrcAddr - || prevRep.lastDestAddr != progRep->lastDestAddr - || prevRep.dmaSize != progRep->dmaSize - || prevRep.currBufDesc != progRep->currBufDesc) { - /* If they don't match, remember previous values and - try again: */ - prevRep.lastSrcAddr = progRep->lastSrcAddr; - prevRep.lastDestAddr = progRep->lastDestAddr; - prevRep.dmaSize = progRep->dmaSize; - prevRep.currBufDesc = progRep->currBufDesc; - again = MCD_TRUE; - } else - again = MCD_FALSE; - } while (again == MCD_TRUE); - - /* Update the dCount, srcAddr and destAddr */ - /* To calculate dmaCount, we consider destination address. C - overs M1,P1,Z for destination */ - switch (MCD_remVariants.remDestRsdIncr[channel]) { - case MINUS1: - subModVal = - ((int)progRep-> - lastDestAddr) & ((MCD_remVariants.remXferSize[channel]) - - 1); - addModVal = - ((int)progRep->currBufDesc-> - destAddr) & ((MCD_remVariants.remXferSize[channel]) - 1); - LWAlignedInitDestAddr = - (progRep->currBufDesc->destAddr) - addModVal; - LWAlignedCurrDestAddr = (progRep->lastDestAddr) - subModVal; - destDiffBytes = LWAlignedInitDestAddr - LWAlignedCurrDestAddr; - bytesNotXfered = - (destDiffBytes / MCD_remVariants.remDestIncr[channel]) * - (MCD_remVariants.remDestIncr[channel] - + MCD_remVariants.remXferSize[channel]); - progRep->dmaSize = - destDiffBytes - bytesNotXfered + addModVal - subModVal; - break; - case ZERO: - progRep->lastDestAddr = progRep->currBufDesc->destAddr; - break; - case PLUS1: - /* This value has to be subtracted from the final - calculated dCount. */ - subModVal = - ((int)progRep->currBufDesc-> - destAddr) & ((MCD_remVariants.remXferSize[channel]) - 1); - /* These bytes are already in lastDestAddr. */ - addModVal = - ((int)progRep-> - lastDestAddr) & ((MCD_remVariants.remXferSize[channel]) - - 1); - LWAlignedInitDestAddr = - (progRep->currBufDesc->destAddr) - subModVal; - LWAlignedCurrDestAddr = (progRep->lastDestAddr) - addModVal; - destDiffBytes = (progRep->lastDestAddr - LWAlignedInitDestAddr); - numIterations = - (LWAlignedCurrDestAddr - - LWAlignedInitDestAddr) / - MCD_remVariants.remDestIncr[channel]; - bytesNotXfered = - numIterations * (MCD_remVariants.remDestIncr[channel] - - MCD_remVariants.remXferSize[channel]); - progRep->dmaSize = destDiffBytes - bytesNotXfered - subModVal; - break; - default: - break; - } - - /* This covers M1,P1,Z for source */ - switch (MCD_remVariants.remSrcRsdIncr[channel]) { - case MINUS1: - progRep->lastSrcAddr = - progRep->currBufDesc->srcAddr + - (MCD_remVariants.remSrcIncr[channel] * - (progRep->dmaSize / MCD_remVariants.remXferSize[channel])); - break; - case ZERO: - progRep->lastSrcAddr = progRep->currBufDesc->srcAddr; - break; - case PLUS1: - progRep->lastSrcAddr = - progRep->currBufDesc->srcAddr + - (MCD_remVariants.remSrcIncr[channel] * - (progRep->dmaSize / MCD_remVariants.remXferSize[channel])); - break; - default: - break; - } - - return (MCD_OK); -} - -/******************* End of MCD_XferProgrQuery() ********************/ - -/********************************************************************/ -/* MCD_resmActions() does the majority of the actions of a DMA resume. - * It is called from MCD_killDma() and MCD_resumeDma(). It has to be - * a separate function because the kill function has to negate the task - * enable before resuming it, but the resume function has to do nothing - * if there is no DMA on that channel (i.e., if the enable bit is 0). - */ -static void MCD_resmActions(int channel) -{ - MCD_dmaBar->debugControl = DBG_CTL_DISABLE; - MCD_dmaBar->debugStatus = MCD_dmaBar->debugStatus; - /* This register is selected to know which initiator is - actually asserted. */ - MCD_dmaBar->ptdDebug = PTD_DBG_TSK_VLD_INIT; - - if ((MCD_dmaBar->ptdDebug >> channel) & 0x1) - MCD_chStatus[channel] = MCD_RUNNING; - else - MCD_chStatus[channel] = MCD_IDLE; -} - -/********************* End of MCD_resmActions() *********************/ - -/********************************************************************/ -/* Function: MCD_killDma - * Purpose: Halt the DMA on the requested channel, without any - * intention of resuming the DMA. - * Arguments: channel - requested channel - * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK - * - * Notes: - * A DMA may be killed from any state, including paused state, and it - * always goes to the MCD_HALTED state even if it is killed while in - * the MCD_NO_DMA or MCD_IDLE states. - */ -int MCD_killDma(int channel) -{ - /* MCD_XferProg progRep; */ - - if ((channel < 0) || (channel >= NCHANNELS)) - return (MCD_CHANNEL_INVALID); - - MCD_dmaBar->taskControl[channel] = 0x0; - MCD_resumeDma(channel); - /* - * This must be after the write to the TCR so that the task doesn't - * start up again momentarily, and before the status assignment so - * as to override whatever MCD_resumeDma() may do to the channel - * status. - */ - MCD_chStatus[channel] = MCD_HALTED; - - /* - * Update the current buffer descriptor's lastDestAddr field - * - * MCD_XferProgrQuery (channel, &progRep); - * progRep.currBufDesc->lastDestAddr = progRep.lastDestAddr; - */ - return (MCD_OK); -} - -/************************ End of MCD_killDma() **********************/ - -/********************************************************************/ -/* Function: MCD_continDma - * Purpose: Continue a DMA which as stopped due to encountering an - * unready buffer descriptor. - * Arguments: channel - channel to continue the DMA on - * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK - * - * Notes: - * This routine does not check to see if there is a task which can - * be continued. Also this routine should not be used with single DMAs. - */ -int MCD_continDma(int channel) -{ - if ((channel < 0) || (channel >= NCHANNELS)) - return (MCD_CHANNEL_INVALID); - - MCD_dmaBar->taskControl[channel] |= TASK_CTL_EN; - MCD_chStatus[channel] = MCD_RUNNING; - - return (MCD_OK); -} - -/********************** End of MCD_continDma() **********************/ - -/********************************************************************* - * MCD_pauseDma() and MCD_resumeDma() below use the DMA's debug unit - * to freeze a task and resume it. We freeze a task by breakpointing - * on the stated task. That is, not any specific place in the task, - * but any time that task executes. In particular, when that task - * executes, we want to freeze that task and only that task. - * - * The bits of the debug control register influence interrupts vs. - * breakpoints as follows: - * - Bits 14 and 0 enable or disable debug functions. If enabled, you - * will get the interrupt but you may or may not get a breakpoint. - * - Bits 2 and 1 decide whether you also get a breakpoint in addition - * to an interrupt. - * - * The debug unit can do these actions in response to either internally - * detected breakpoint conditions from the comparators, or in response - * to the external breakpoint pin, or both. - * - Bits 14 and 1 perform the above-described functions for - * internally-generated conditions, i.e., the debug comparators. - * - Bits 0 and 2 perform the above-described functions for external - * conditions, i.e., the breakpoint external pin. - * - * Note that, although you "always" get the interrupt when you turn - * the debug functions, the interrupt can nevertheless, if desired, be - * masked by the corresponding bit in the PTD's IMR. Note also that - * this means that bits 14 and 0 must enable debug functions before - * bits 1 and 2, respectively, have any effect. - * - * NOTE: It's extremely important to not pause more than one DMA channel - * at a time. - ********************************************************************/ - -/********************************************************************/ -/* Function: MCD_pauseDma - * Purpose: Pauses the DMA on a given channel (if any DMA is running - * on that channel). - * Arguments: channel - * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK - */ -int MCD_pauseDma(int channel) -{ - /* MCD_XferProg progRep; */ - - if ((channel < 0) || (channel >= NCHANNELS)) - return (MCD_CHANNEL_INVALID); - - if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN) { - MCD_dmaBar->debugComp1 = channel; - MCD_dmaBar->debugControl = - DBG_CTL_ENABLE | (1 << (channel + 16)); - MCD_chStatus[channel] = MCD_PAUSED; - - /* - * Update the current buffer descriptor's lastDestAddr field - * - * MCD_XferProgrQuery (channel, &progRep); - * progRep.currBufDesc->lastDestAddr = progRep.lastDestAddr; - */ - } - return (MCD_OK); -} - -/************************* End of MCD_pauseDma() ********************/ - -/********************************************************************/ -/* Function: MCD_resumeDma - * Purpose: Resumes the DMA on a given channel (if any DMA is - * running on that channel). - * Arguments: channel - channel on which to resume DMA - * Returns: MCD_CHANNEL_INVALID if channel is invalid, else MCD_OK - */ -int MCD_resumeDma(int channel) -{ - if ((channel < 0) || (channel >= NCHANNELS)) - return (MCD_CHANNEL_INVALID); - - if (MCD_dmaBar->taskControl[channel] & TASK_CTL_EN) - MCD_resmActions(channel); - - return (MCD_OK); -} - -/************************ End of MCD_resumeDma() ********************/ - -/********************************************************************/ -/* Function: MCD_csumQuery - * Purpose: Provide the checksum after performing a non-chained DMA - * Arguments: channel - channel to report on - * csum - pointer to where to write the checksum/CRC - * Returns: MCD_ERROR if the channel is invalid, else MCD_OK - * - * Notes: - * - */ -int MCD_csumQuery(int channel, u32 * csum) -{ -#ifdef MCD_INCLUDE_EU - if ((channel < 0) || (channel >= NCHANNELS)) - return (MCD_CHANNEL_INVALID); - - *csum = MCD_relocBuffDesc[channel].csumResult; - return (MCD_OK); -#else - return (MCD_ERROR); -#endif -} - -/*********************** End of MCD_resumeDma() *********************/ - -/********************************************************************/ -/* Function: MCD_getCodeSize - * Purpose: Provide the size requirements of the microcoded tasks - * Returns: Size in bytes - */ -int MCD_getCodeSize(void) -{ -#ifdef MCD_INCLUDE_EU - return (0x2b5c); -#else - return (0x173c); -#endif -} - -/********************** End of MCD_getCodeSize() ********************/ - -/********************************************************************/ -/* Function: MCD_getVersion - * Purpose: Provide the version string and number - * Arguments: longVersion - user supplied pointer to a pointer to a char - * which points to the version string - * Returns: Version number and version string (by reference) - */ -char MCD_versionString[] = "Multi-channel DMA API Alpha v0.3 (2004-04-26)"; -#define MCD_REV_MAJOR 0x00 -#define MCD_REV_MINOR 0x03 - -int MCD_getVersion(char **longVersion) -{ - *longVersion = MCD_versionString; - return ((MCD_REV_MAJOR << 8) | MCD_REV_MINOR); -} - -/********************** End of MCD_getVersion() *********************/ - -/********************************************************************/ -/* Private version of memcpy() - * Note that everything this is used for is longword-aligned. - */ -static void MCD_memcpy(int *dest, int *src, u32 size) -{ - u32 i; - - for (i = 0; i < size; i += sizeof(int), dest++, src++) - *dest = *src; -} diff --git a/drivers/dma/MCD_tasks.c b/drivers/dma/MCD_tasks.c deleted file mode 100644 index 453d95413da..00000000000 --- a/drivers/dma/MCD_tasks.c +++ /dev/null @@ -1,2413 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - */ - -/* Contains task code and structures for Multi-channel DMA */ - -#include <common.h> - -#include <MCD_dma.h> - -u32 MCD_varTab0[]; -u32 MCD_varTab1[]; -u32 MCD_varTab2[]; -u32 MCD_varTab3[]; -u32 MCD_varTab4[]; -u32 MCD_varTab5[]; -u32 MCD_varTab6[]; -u32 MCD_varTab7[]; -u32 MCD_varTab8[]; -u32 MCD_varTab9[]; -u32 MCD_varTab10[]; -u32 MCD_varTab11[]; -u32 MCD_varTab12[]; -u32 MCD_varTab13[]; -u32 MCD_varTab14[]; -u32 MCD_varTab15[]; - -u32 MCD_funcDescTab0[]; -#ifdef MCD_INCLUDE_EU -u32 MCD_funcDescTab1[]; -u32 MCD_funcDescTab2[]; -u32 MCD_funcDescTab3[]; -u32 MCD_funcDescTab4[]; -u32 MCD_funcDescTab5[]; -u32 MCD_funcDescTab6[]; -u32 MCD_funcDescTab7[]; -u32 MCD_funcDescTab8[]; -u32 MCD_funcDescTab9[]; -u32 MCD_funcDescTab10[]; -u32 MCD_funcDescTab11[]; -u32 MCD_funcDescTab12[]; -u32 MCD_funcDescTab13[]; -u32 MCD_funcDescTab14[]; -u32 MCD_funcDescTab15[]; -#endif - -u32 MCD_contextSave0[]; -u32 MCD_contextSave1[]; -u32 MCD_contextSave2[]; -u32 MCD_contextSave3[]; -u32 MCD_contextSave4[]; -u32 MCD_contextSave5[]; -u32 MCD_contextSave6[]; -u32 MCD_contextSave7[]; -u32 MCD_contextSave8[]; -u32 MCD_contextSave9[]; -u32 MCD_contextSave10[]; -u32 MCD_contextSave11[]; -u32 MCD_contextSave12[]; -u32 MCD_contextSave13[]; -u32 MCD_contextSave14[]; -u32 MCD_contextSave15[]; - -u32 MCD_realTaskTableSrc[] = { - 0x00000000, - 0x00000000, - (u32) MCD_varTab0, /* Task 0 Variable Table */ - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ - 0x00000000, - 0x00000000, - (u32) MCD_contextSave0, /* Task 0 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab1, /* Task 1 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab1, /* Task 1 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave1, /* Task 1 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab2, /* Task 2 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab2, /* Task 2 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave2, /* Task 2 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab3, /* Task 3 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab3, /* Task 3 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave3, /* Task 3 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab4, /* Task 4 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab4, /* Task 4 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave4, /* Task 4 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab5, /* Task 5 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab5, /* Task 5 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave5, /* Task 5 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab6, /* Task 6 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab6, /* Task 6 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave6, /* Task 6 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab7, /* Task 7 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab7, /* Task 7 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave7, /* Task 7 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab8, /* Task 8 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab8, /* Task 8 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave8, /* Task 8 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab9, /* Task 9 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab9, /* Task 9 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave9, /* Task 9 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab10, /* Task 10 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab10, /* Task 10 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave10, /* Task 10 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab11, /* Task 11 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab11, /* Task 11 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave11, /* Task 11 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab12, /* Task 12 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab12, /* Task 12 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave12, /* Task 12 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab13, /* Task 13 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab13, /* Task 13 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave13, /* Task 13 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab14, /* Task 14 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab14, /* Task 14 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave14, /* Task 14 context save space */ - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_varTab15, /* Task 15 Variable Table */ -#ifdef MCD_INCLUDE_EU - (u32) MCD_funcDescTab15, /* Task 15 Fn Desc. Table & Flags */ -#else - (u32) MCD_funcDescTab0, /* Task 0 Fn Desc. Table & Flags */ -#endif - 0x00000000, - 0x00000000, - (u32) MCD_contextSave15, /* Task 15 context save space */ - 0x00000000, -}; - -u32 MCD_varTab0[] = { /* Task 0 Variable Table */ - 0x00000000, /* var[0] */ - 0x00000000, /* var[1] */ - 0x00000000, /* var[2] */ - 0x00000000, /* var[3] */ - 0x00000000, /* var[4] */ - 0x00000000, /* var[5] */ - 0x00000000, /* var[6] */ - 0x00000000, /* var[7] */ - 0x00000000, /* var[8] */ - 0x00000000, /* var[9] */ - 0x00000000, /* var[10] */ - 0x00000000, /* var[11] */ - 0x00000000, /* var[12] */ - 0x00000000, /* var[13] */ - 0x00000000, /* var[14] */ - 0x00000000, /* var[15] */ - 0x00000000, /* var[16] */ - 0x00000000, /* var[17] */ - 0x00000000, /* var[18] */ - 0x00000000, /* var[19] */ - 0x00000000, /* var[20] */ - 0x00000000, /* var[21] */ - 0x00000000, /* var[22] */ - 0x00000000, /* var[23] */ - 0xe0000000, /* inc[0] */ - 0x20000000, /* inc[1] */ - 0x2000ffff, /* inc[2] */ - 0x00000000, /* inc[3] */ - 0x00000000, /* inc[4] */ - 0x00000000, /* inc[5] */ - 0x00000000, /* inc[6] */ - 0x00000000, /* inc[7] */ -}; - -u32 MCD_varTab1[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab2[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab3[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab4[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab5[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab6[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab7[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab8[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab9[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab10[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab11[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab12[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab13[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab14[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_varTab15[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xe0000000, - 0x20000000, - 0x2000ffff, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_funcDescTab0[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -#ifdef MCD_INCLUDE_EU -u32 MCD_funcDescTab1[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab2[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab3[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab4[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab5[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab6[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab7[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab8[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab9[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab10[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab11[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab12[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab13[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab14[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; - -u32 MCD_funcDescTab15[] = { - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0xa0045670, - 0xa0000000, - 0xa0000000, - 0x20000000, - 0x21800000, - 0x21e00000, - 0x20400000, - 0x20500000, - 0x205a0000, - 0x20a00000, - 0x202fa000, - 0x202f9000, - 0x202ea000, - 0x202da000, - 0x202e2000, - 0x202f2000, -}; -#endif /*MCD_INCLUDE_EU */ - -u32 MCD_contextSave0[128]; /* Task 0 context save space */ -u32 MCD_contextSave1[128]; /* Task 1 context save space */ -u32 MCD_contextSave2[128]; /* Task 2 context save space */ -u32 MCD_contextSave3[128]; /* Task 3 context save space */ -u32 MCD_contextSave4[128]; /* Task 4 context save space */ -u32 MCD_contextSave5[128]; /* Task 5 context save space */ -u32 MCD_contextSave6[128]; /* Task 6 context save space */ -u32 MCD_contextSave7[128]; /* Task 7 context save space */ -u32 MCD_contextSave8[128]; /* Task 8 context save space */ -u32 MCD_contextSave9[128]; /* Task 9 context save space */ -u32 MCD_contextSave10[128]; /* Task 10 context save space */ -u32 MCD_contextSave11[128]; /* Task 11 context save space */ -u32 MCD_contextSave12[128]; /* Task 12 context save space */ -u32 MCD_contextSave13[128]; /* Task 13 context save space */ -u32 MCD_contextSave14[128]; /* Task 14 context save space */ -u32 MCD_contextSave15[128]; /* Task 15 context save space */ - -u32 MCD_ChainNoEu_TDT[]; -u32 MCD_SingleNoEu_TDT[]; -#ifdef MCD_INCLUDE_EU -u32 MCD_ChainEu_TDT[]; -u32 MCD_SingleEu_TDT[]; -#endif -u32 MCD_ENetRcv_TDT[]; -u32 MCD_ENetXmit_TDT[]; - -u32 MCD_modelTaskTableSrc[] = { - (u32) MCD_ChainNoEu_TDT, - (u32) & ((u8 *) MCD_ChainNoEu_TDT)[0x0000016c], - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_SingleNoEu_TDT, - (u32) & ((u8 *) MCD_SingleNoEu_TDT)[0x000000d4], - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -#ifdef MCD_INCLUDE_EU - (u32) MCD_ChainEu_TDT, - (u32) & ((u8 *) MCD_ChainEu_TDT)[0x000001b4], - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_SingleEu_TDT, - (u32) & ((u8 *) MCD_SingleEu_TDT)[0x00000124], - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -#endif - (u32) MCD_ENetRcv_TDT, - (u32) & ((u8 *) MCD_ENetRcv_TDT)[0x0000009c], - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - (u32) MCD_ENetXmit_TDT, - (u32) & ((u8 *) MCD_ENetXmit_TDT)[0x000000d0], - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, - 0x00000000, -}; - -u32 MCD_ChainNoEu_TDT[] = { - 0x80004000, - 0x8118801b, - 0xb8c60018, - 0x10002b10, - 0x7000000d, - 0x018cf89f, - 0x6000000a, - 0x080cf89f, - 0x000001f8, - 0x98180364, - 0x8118801b, - 0xf8c6001a, - 0xb8c6601b, - 0x10002710, - 0x00000f18, - 0xb8c6001d, - 0x10001310, - 0x60000007, - 0x014cf88b, - 0x98c6001c, - 0x00000710, - 0x98c70018, - 0x10001f10, - 0x0000c818, - 0x000001f8, - 0xc1476018, - 0xc003231d, - 0x811a601b, - 0xc1862102, - 0x849be009, - 0x03fed7b8, - 0xda9b001b, - 0x9b9be01b, - 0x1000cb20, - 0x70000006, - 0x088cf88f, - 0x1000cb28, - 0x70000006, - 0x088cf88f, - 0x1000cb30, - 0x70000006, - 0x088cf88f, - 0x1000cb38, - 0x0000c728, - 0x000001f8, - 0xc1476018, - 0xc003241d, - 0x811a601b, - 0xda9b001b, - 0x9b9be01b, - 0x0000d3a0, - 0xc1862102, - 0x849be009, - 0x0bfed7b8, - 0xda9b001b, - 0x9b9be01b, - 0x1000cb20, - 0x70000006, - 0x088cf88f, - 0x1000cb28, - 0x70000006, - 0x088cf88f, - 0x1000cb30, - 0x70000006, - 0x088cf88f, - 0x1000cb38, - 0x0000c728, - 0x000001f8, - 0x8118801b, - 0xd8c60018, - 0x98c6601c, - 0x6000000b, - 0x0c8cfc9f, - 0x000001f8, - 0xa146001e, - 0x10000b08, - 0x10002050, - 0xb8c60018, - 0x10002b10, - 0x7000000a, - 0x080cf89f, - 0x6000000d, - 0x018cf89f, - 0x000001f8, - 0x8618801b, - 0x7000000e, - 0x084cf21f, - 0xd8990336, - 0x8019801b, - 0x040001f8, - 0x000001f8, - 0x000001f8, -}; - -u32 MCD_SingleNoEu_TDT[] = { - 0x8198001b, - 0x7000000d, - 0x080cf81f, - 0x8198801b, - 0x6000000e, - 0x084cf85f, - 0x000001f8, - 0x8298001b, - 0x7000000d, - 0x010cf81f, - 0x6000000e, - 0x018cf81f, - 0xc202601b, - 0xc002221c, - 0x809a601b, - 0xc10420c2, - 0x839be009, - 0x03fed7b8, - 0xda9b001b, - 0x9b9be01b, - 0x70000006, - 0x088cf889, - 0x1000cb28, - 0x70000006, - 0x088cf889, - 0x1000cb30, - 0x70000006, - 0x088cf889, - 0x0000cb38, - 0x000001f8, - 0xc202601b, - 0xc002229c, - 0x809a601b, - 0xda9b001b, - 0x9b9be01b, - 0x0000d3a0, - 0xc10420c2, - 0x839be009, - 0x0bfed7b8, - 0xda9b001b, - 0x9b9be01b, - 0x70000006, - 0x088cf889, - 0x1000cb28, - 0x70000006, - 0x088cf889, - 0x1000cb30, - 0x70000006, - 0x088cf889, - 0x0000cb38, - 0x000001f8, - 0xc318022d, - 0x8018801b, - 0x040001f8, -}; - -#ifdef MCD_INCLUDE_EU -u32 MCD_ChainEu_TDT[] = { - 0x80004000, - 0x8198801b, - 0xb8c68018, - 0x10002f10, - 0x7000000d, - 0x01ccf89f, - 0x6000000a, - 0x080cf89f, - 0x000001f8, - 0x981803a4, - 0x8198801b, - 0xf8c6801a, - 0xb8c6e01b, - 0x10002b10, - 0x00001318, - 0xb8c6801d, - 0x10001710, - 0x60000007, - 0x018cf88c, - 0x98c6801c, - 0x00000b10, - 0x98c78018, - 0x10002310, - 0x0000c820, - 0x000001f8, - 0x8698801b, - 0x7000000f, - 0x084cf2df, - 0xd899042d, - 0x8019801b, - 0x60000003, - 0x2cd7c7df, - 0xd8990364, - 0x8019801b, - 0x60000003, - 0x2c17c7df, - 0x000001f8, - 0xc1c7e018, - 0xc003a35e, - 0x819a601b, - 0xc206a142, - 0x851be009, - 0x63fe0000, - 0x0d4cfddf, - 0xda9b001b, - 0x9b9be01b, - 0x70000002, - 0x004cf81f, - 0x1000cb20, - 0x70000006, - 0x088cf891, - 0x1000cb28, - 0x70000006, - 0x088cf891, - 0x1000cb30, - 0x70000006, - 0x088cf891, - 0x1000cb38, - 0x0000c728, - 0x000001f8, - 0xc1c7e018, - 0xc003a49e, - 0x819a601b, - 0xda9b001b, - 0x9b9be01b, - 0x0000d3a0, - 0xc206a142, - 0x851be009, - 0x6bfe0000, - 0x0d4cfddf, - 0xda9b001b, - 0x9b9be01b, - 0x70000002, - 0x004cf81f, - 0x1000cb20, - 0x70000006, - 0x088cf891, - 0x1000cb28, - 0x70000006, - 0x088cf891, - 0x1000cb30, - 0x70000006, - 0x088cf891, - 0x1000cb38, - 0x0000c728, - 0x000001f8, - 0x8198801b, - 0xd8c68018, - 0x98c6e01c, - 0x6000000b, - 0x0c8cfc9f, - 0x0000cc08, - 0xa1c6801e, - 0x10000f08, - 0x10002458, - 0xb8c68018, - 0x10002f10, - 0x7000000a, - 0x080cf89f, - 0x6000000d, - 0x01ccf89f, - 0x000001f8, - 0x8698801b, - 0x7000000e, - 0x084cf25f, - 0xd899037f, - 0x8019801b, - 0x040001f8, - 0x000001f8, - 0x000001f8, -}; - -u32 MCD_SingleEu_TDT[] = { - 0x8218001b, - 0x7000000d, - 0x080cf81f, - 0x8218801b, - 0x6000000e, - 0x084cf85f, - 0x000001f8, - 0x8318001b, - 0x7000000d, - 0x014cf81f, - 0x6000000e, - 0x01ccf81f, - 0x8498001b, - 0x7000000f, - 0x080cf19f, - 0xd81882a4, - 0x8019001b, - 0x60000003, - 0x2c97c7df, - 0xd818826d, - 0x8019001b, - 0x60000003, - 0x2c17c7df, - 0x000001f8, - 0xc282e01b, - 0xc002a25e, - 0x811a601b, - 0xc184a102, - 0x841be009, - 0x63fe0000, - 0x0d4cfddf, - 0xda9b001b, - 0x9b9be01b, - 0x70000002, - 0x004cf99f, - 0x70000006, - 0x088cf88b, - 0x1000cb28, - 0x70000006, - 0x088cf88b, - 0x1000cb30, - 0x70000006, - 0x088cf88b, - 0x0000cb38, - 0x000001f8, - 0xc282e01b, - 0xc002a31e, - 0x811a601b, - 0xda9b001b, - 0x9b9be01b, - 0x0000d3a0, - 0xc184a102, - 0x841be009, - 0x6bfe0000, - 0x0d4cfddf, - 0xda9b001b, - 0x9b9be01b, - 0x70000002, - 0x004cf99f, - 0x70000006, - 0x088cf88b, - 0x1000cb28, - 0x70000006, - 0x088cf88b, - 0x1000cb30, - 0x70000006, - 0x088cf88b, - 0x0000cb38, - 0x000001f8, - 0x8144801c, - 0x0000c008, - 0xc398027f, - 0x8018801b, - 0x040001f8, -}; -#endif -u32 MCD_ENetRcv_TDT[] = { - 0x80004000, - 0x81988000, - 0x10000788, - 0x6000000a, - 0x080cf05f, - 0x98180209, - 0x81c40004, - 0x7000000e, - 0x010cf05f, - 0x7000000c, - 0x01ccf05f, - 0x70000004, - 0x014cf049, - 0x70000004, - 0x004cf04a, - 0x00000b88, - 0xc4030150, - 0x8119e012, - 0x03e0cf90, - 0x81188000, - 0x000ac788, - 0xc4030000, - 0x8199e000, - 0x70000004, - 0x084cfc8b, - 0x60000005, - 0x0cccf841, - 0x81c60000, - 0xc399021b, - 0x80198000, - 0x00008400, - 0x00000f08, - 0x81988000, - 0x10000788, - 0x6000000a, - 0x080cf05f, - 0xc2188209, - 0x80190000, - 0x040001f8, - 0x000001f8, -}; - -u32 MCD_ENetXmit_TDT[] = { - 0x80004000, - 0x81988000, - 0x10000788, - 0x6000000a, - 0x080cf05f, - 0x98180309, - 0x80004003, - 0x81c60004, - 0x7000000e, - 0x014cf05f, - 0x7000000c, - 0x028cf05f, - 0x7000000d, - 0x018cf05f, - 0x70000004, - 0x01ccf04d, - 0x10000b90, - 0x60000004, - 0x020cf0a1, - 0xc3188312, - 0x83c70000, - 0x00001f10, - 0xc583a3c3, - 0x81042325, - 0x03e0c798, - 0xd8990000, - 0x9999e000, - 0x000acf98, - 0xd8992306, - 0x9999e03f, - 0x03eac798, - 0xd8990000, - 0x9999e000, - 0x000acf98, - 0xd8990000, - 0x99832302, - 0x0beac798, - 0x81988000, - 0x6000000b, - 0x0c4cfc5f, - 0x81c80000, - 0xc5190312, - 0x80198000, - 0x00008400, - 0x00000f08, - 0x81988000, - 0x10000788, - 0x6000000a, - 0x080cf05f, - 0xc2988309, - 0x80190000, - 0x040001f8, - 0x000001f8, -}; - -#ifdef MCD_INCLUDE_EU -MCD_bufDesc MCD_singleBufDescs[NCHANNELS]; -#endif diff --git a/drivers/dma/MCD_tasksInit.c b/drivers/dma/MCD_tasksInit.c deleted file mode 100644 index 079cd0af3c0..00000000000 --- a/drivers/dma/MCD_tasksInit.c +++ /dev/null @@ -1,225 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - */ - -#include <common.h> - -/* Functions for initializing variable tables of different types of tasks. */ - -/* - * Do not edit! - */ - -#include <MCD_dma.h> - -extern dmaRegs *MCD_dmaBar; - -/* Task 0 */ - -void MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, - int xferSize, short xferSizeIncr, int *cSave, - volatile TaskTableEntry * taskTable, int channel) -{ - volatile TaskTableEntry *taskChan = taskTable + channel; - - MCD_SET_VAR(taskChan, 2, (u32) currBD); /* var[2] */ - MCD_SET_VAR(taskChan, 25, (u32) (0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ - MCD_SET_VAR(taskChan, 24, (u32) (0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ - MCD_SET_VAR(taskChan, 11, (u32) xferSize); /* var[11] */ - MCD_SET_VAR(taskChan, 26, (u32) (0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ - MCD_SET_VAR(taskChan, 0, (u32) cSave); /* var[0] */ - MCD_SET_VAR(taskChan, 1, (u32) 0x00000000); /* var[1] */ - MCD_SET_VAR(taskChan, 3, (u32) 0x00000000); /* var[3] */ - MCD_SET_VAR(taskChan, 4, (u32) 0x00000000); /* var[4] */ - MCD_SET_VAR(taskChan, 5, (u32) 0x00000000); /* var[5] */ - MCD_SET_VAR(taskChan, 6, (u32) 0x00000000); /* var[6] */ - MCD_SET_VAR(taskChan, 7, (u32) 0x00000000); /* var[7] */ - MCD_SET_VAR(taskChan, 8, (u32) 0x00000000); /* var[8] */ - MCD_SET_VAR(taskChan, 9, (u32) 0x00000000); /* var[9] */ - MCD_SET_VAR(taskChan, 10, (u32) 0x00000000); /* var[10] */ - MCD_SET_VAR(taskChan, 12, (u32) 0x00000000); /* var[12] */ - MCD_SET_VAR(taskChan, 13, (u32) 0x80000000); /* var[13] */ - MCD_SET_VAR(taskChan, 14, (u32) 0x00000010); /* var[14] */ - MCD_SET_VAR(taskChan, 15, (u32) 0x00000004); /* var[15] */ - MCD_SET_VAR(taskChan, 16, (u32) 0x08000000); /* var[16] */ - MCD_SET_VAR(taskChan, 27, (u32) 0x00000000); /* inc[3] */ - MCD_SET_VAR(taskChan, 28, (u32) 0x80000000); /* inc[4] */ - MCD_SET_VAR(taskChan, 29, (u32) 0x80000001); /* inc[5] */ - MCD_SET_VAR(taskChan, 30, (u32) 0x40000000); /* inc[6] */ - - /* Set the task's Enable bit in its Task Control Register */ - MCD_dmaBar->taskControl[channel] |= (u16) 0x8000; -} - -/* Task 1 */ - -void MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, - short destIncr, int dmaSize, short xferSizeIncr, - int flags, int *currBD, int *cSave, - volatile TaskTableEntry * taskTable, int channel) -{ - volatile TaskTableEntry *taskChan = taskTable + channel; - - MCD_SET_VAR(taskChan, 7, (u32) srcAddr); /* var[7] */ - MCD_SET_VAR(taskChan, 25, (u32) (0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ - MCD_SET_VAR(taskChan, 2, (u32) destAddr); /* var[2] */ - MCD_SET_VAR(taskChan, 24, (u32) (0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ - MCD_SET_VAR(taskChan, 3, (u32) dmaSize); /* var[3] */ - MCD_SET_VAR(taskChan, 26, (u32) (0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ - MCD_SET_VAR(taskChan, 5, (u32) flags); /* var[5] */ - MCD_SET_VAR(taskChan, 1, (u32) currBD); /* var[1] */ - MCD_SET_VAR(taskChan, 0, (u32) cSave); /* var[0] */ - MCD_SET_VAR(taskChan, 4, (u32) 0x00000000); /* var[4] */ - MCD_SET_VAR(taskChan, 6, (u32) 0x00000000); /* var[6] */ - MCD_SET_VAR(taskChan, 8, (u32) 0x00000000); /* var[8] */ - MCD_SET_VAR(taskChan, 9, (u32) 0x00000004); /* var[9] */ - MCD_SET_VAR(taskChan, 10, (u32) 0x08000000); /* var[10] */ - MCD_SET_VAR(taskChan, 27, (u32) 0x00000000); /* inc[3] */ - MCD_SET_VAR(taskChan, 28, (u32) 0x80000001); /* inc[4] */ - MCD_SET_VAR(taskChan, 29, (u32) 0x40000000); /* inc[5] */ - - /* Set the task's Enable bit in its Task Control Register */ - MCD_dmaBar->taskControl[channel] |= (u16) 0x8000; -} - -/* Task 2 */ - -void MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, - int xferSize, short xferSizeIncr, int *cSave, - volatile TaskTableEntry * taskTable, int channel) -{ - volatile TaskTableEntry *taskChan = taskTable + channel; - - MCD_SET_VAR(taskChan, 3, (u32) currBD); /* var[3] */ - MCD_SET_VAR(taskChan, 25, (u32) (0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ - MCD_SET_VAR(taskChan, 24, (u32) (0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ - MCD_SET_VAR(taskChan, 12, (u32) xferSize); /* var[12] */ - MCD_SET_VAR(taskChan, 26, (u32) (0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ - MCD_SET_VAR(taskChan, 0, (u32) cSave); /* var[0] */ - MCD_SET_VAR(taskChan, 1, (u32) 0x00000000); /* var[1] */ - MCD_SET_VAR(taskChan, 2, (u32) 0x00000000); /* var[2] */ - MCD_SET_VAR(taskChan, 4, (u32) 0x00000000); /* var[4] */ - MCD_SET_VAR(taskChan, 5, (u32) 0x00000000); /* var[5] */ - MCD_SET_VAR(taskChan, 6, (u32) 0x00000000); /* var[6] */ - MCD_SET_VAR(taskChan, 7, (u32) 0x00000000); /* var[7] */ - MCD_SET_VAR(taskChan, 8, (u32) 0x00000000); /* var[8] */ - MCD_SET_VAR(taskChan, 9, (u32) 0x00000000); /* var[9] */ - MCD_SET_VAR(taskChan, 10, (u32) 0x00000000); /* var[10] */ - MCD_SET_VAR(taskChan, 11, (u32) 0x00000000); /* var[11] */ - MCD_SET_VAR(taskChan, 13, (u32) 0x00000000); /* var[13] */ - MCD_SET_VAR(taskChan, 14, (u32) 0x80000000); /* var[14] */ - MCD_SET_VAR(taskChan, 15, (u32) 0x00000010); /* var[15] */ - MCD_SET_VAR(taskChan, 16, (u32) 0x00000001); /* var[16] */ - MCD_SET_VAR(taskChan, 17, (u32) 0x00000004); /* var[17] */ - MCD_SET_VAR(taskChan, 18, (u32) 0x08000000); /* var[18] */ - MCD_SET_VAR(taskChan, 27, (u32) 0x00000000); /* inc[3] */ - MCD_SET_VAR(taskChan, 28, (u32) 0x80000000); /* inc[4] */ - MCD_SET_VAR(taskChan, 29, (u32) 0xc0000000); /* inc[5] */ - MCD_SET_VAR(taskChan, 30, (u32) 0x80000001); /* inc[6] */ - MCD_SET_VAR(taskChan, 31, (u32) 0x40000000); /* inc[7] */ - - /* Set the task's Enable bit in its Task Control Register */ - MCD_dmaBar->taskControl[channel] |= (u16) 0x8000; -} - -/* Task 3 */ - -void MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, - short destIncr, int dmaSize, short xferSizeIncr, - int flags, int *currBD, int *cSave, - volatile TaskTableEntry * taskTable, int channel) -{ - volatile TaskTableEntry *taskChan = taskTable + channel; - - MCD_SET_VAR(taskChan, 8, (u32) srcAddr); /* var[8] */ - MCD_SET_VAR(taskChan, 25, (u32) (0xe000 << 16) | (0xffff & srcIncr)); /* inc[1] */ - MCD_SET_VAR(taskChan, 3, (u32) destAddr); /* var[3] */ - MCD_SET_VAR(taskChan, 24, (u32) (0xe000 << 16) | (0xffff & destIncr)); /* inc[0] */ - MCD_SET_VAR(taskChan, 4, (u32) dmaSize); /* var[4] */ - MCD_SET_VAR(taskChan, 26, (u32) (0x2000 << 16) | (0xffff & xferSizeIncr)); /* inc[2] */ - MCD_SET_VAR(taskChan, 6, (u32) flags); /* var[6] */ - MCD_SET_VAR(taskChan, 2, (u32) currBD); /* var[2] */ - MCD_SET_VAR(taskChan, 0, (u32) cSave); /* var[0] */ - MCD_SET_VAR(taskChan, 1, (u32) 0x00000000); /* var[1] */ - MCD_SET_VAR(taskChan, 5, (u32) 0x00000000); /* var[5] */ - MCD_SET_VAR(taskChan, 7, (u32) 0x00000000); /* var[7] */ - MCD_SET_VAR(taskChan, 9, (u32) 0x00000000); /* var[9] */ - MCD_SET_VAR(taskChan, 10, (u32) 0x00000001); /* var[10] */ - MCD_SET_VAR(taskChan, 11, (u32) 0x00000004); /* var[11] */ - MCD_SET_VAR(taskChan, 12, (u32) 0x08000000); /* var[12] */ - MCD_SET_VAR(taskChan, 27, (u32) 0x00000000); /* inc[3] */ - MCD_SET_VAR(taskChan, 28, (u32) 0xc0000000); /* inc[4] */ - MCD_SET_VAR(taskChan, 29, (u32) 0x80000000); /* inc[5] */ - MCD_SET_VAR(taskChan, 30, (u32) 0x80000001); /* inc[6] */ - MCD_SET_VAR(taskChan, 31, (u32) 0x40000000); /* inc[7] */ - - /* Set the task's Enable bit in its Task Control Register */ - MCD_dmaBar->taskControl[channel] |= (u16) 0x8000; -} - -/* Task 4 */ - -void MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, - volatile TaskTableEntry * taskTable, int channel) -{ - volatile TaskTableEntry *taskChan = taskTable + channel; - - MCD_SET_VAR(taskChan, 0, (u32) bDBase); /* var[0] */ - MCD_SET_VAR(taskChan, 3, (u32) currBD); /* var[3] */ - MCD_SET_VAR(taskChan, 6, (u32) rcvFifoPtr); /* var[6] */ - MCD_SET_VAR(taskChan, 1, (u32) 0x00000000); /* var[1] */ - MCD_SET_VAR(taskChan, 2, (u32) 0x00000000); /* var[2] */ - MCD_SET_VAR(taskChan, 4, (u32) 0x00000000); /* var[4] */ - MCD_SET_VAR(taskChan, 5, (u32) 0x00000000); /* var[5] */ - MCD_SET_VAR(taskChan, 7, (u32) 0x00000000); /* var[7] */ - MCD_SET_VAR(taskChan, 8, (u32) 0x00000000); /* var[8] */ - MCD_SET_VAR(taskChan, 9, (u32) 0x0000ffff); /* var[9] */ - MCD_SET_VAR(taskChan, 10, (u32) 0x30000000); /* var[10] */ - MCD_SET_VAR(taskChan, 11, (u32) 0x0fffffff); /* var[11] */ - MCD_SET_VAR(taskChan, 12, (u32) 0x00000008); /* var[12] */ - MCD_SET_VAR(taskChan, 24, (u32) 0x00000000); /* inc[0] */ - MCD_SET_VAR(taskChan, 25, (u32) 0x60000000); /* inc[1] */ - MCD_SET_VAR(taskChan, 26, (u32) 0x20000004); /* inc[2] */ - MCD_SET_VAR(taskChan, 27, (u32) 0x40000000); /* inc[3] */ - - /* Set the task's Enable bit in its Task Control Register */ - MCD_dmaBar->taskControl[channel] |= (u16) 0x8000; -} - -/* Task 5 */ - -void MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, - volatile TaskTableEntry * taskTable, int channel) -{ - volatile TaskTableEntry *taskChan = taskTable + channel; - - MCD_SET_VAR(taskChan, 0, (u32) bDBase); /* var[0] */ - MCD_SET_VAR(taskChan, 3, (u32) currBD); /* var[3] */ - MCD_SET_VAR(taskChan, 11, (u32) xmitFifoPtr); /* var[11] */ - MCD_SET_VAR(taskChan, 1, (u32) 0x00000000); /* var[1] */ - MCD_SET_VAR(taskChan, 2, (u32) 0x00000000); /* var[2] */ - MCD_SET_VAR(taskChan, 4, (u32) 0x00000000); /* var[4] */ - MCD_SET_VAR(taskChan, 5, (u32) 0x00000000); /* var[5] */ - MCD_SET_VAR(taskChan, 6, (u32) 0x00000000); /* var[6] */ - MCD_SET_VAR(taskChan, 7, (u32) 0x00000000); /* var[7] */ - MCD_SET_VAR(taskChan, 8, (u32) 0x00000000); /* var[8] */ - MCD_SET_VAR(taskChan, 9, (u32) 0x00000000); /* var[9] */ - MCD_SET_VAR(taskChan, 10, (u32) 0x00000000); /* var[10] */ - MCD_SET_VAR(taskChan, 12, (u32) 0x00000000); /* var[12] */ - MCD_SET_VAR(taskChan, 13, (u32) 0x0000ffff); /* var[13] */ - MCD_SET_VAR(taskChan, 14, (u32) 0xffffffff); /* var[14] */ - MCD_SET_VAR(taskChan, 15, (u32) 0x00000004); /* var[15] */ - MCD_SET_VAR(taskChan, 16, (u32) 0x00000008); /* var[16] */ - MCD_SET_VAR(taskChan, 24, (u32) 0x00000000); /* inc[0] */ - MCD_SET_VAR(taskChan, 25, (u32) 0x60000000); /* inc[1] */ - MCD_SET_VAR(taskChan, 26, (u32) 0x40000000); /* inc[2] */ - MCD_SET_VAR(taskChan, 27, (u32) 0xc000fffc); /* inc[3] */ - MCD_SET_VAR(taskChan, 28, (u32) 0xe0000004); /* inc[4] */ - MCD_SET_VAR(taskChan, 29, (u32) 0x80000000); /* inc[5] */ - MCD_SET_VAR(taskChan, 30, (u32) 0x4000ffff); /* inc[6] */ - MCD_SET_VAR(taskChan, 31, (u32) 0xe0000001); /* inc[7] */ - - /* Set the task's Enable bit in its Task Control Register */ - MCD_dmaBar->taskControl[channel] |= (u16) 0x8000; -} diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index a75572fe5de..48811eaaeb3 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_DMA) += dma-uclass.o -obj-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o obj-$(CONFIG_APBH_DMA) += apbh_dma.o obj-$(CONFIG_BCM6348_IUDMA) += bcm6348-iudma.o obj-$(CONFIG_FSL_DMA) += fsl_dma.o diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig index 837c6f1180d..11fc0fe1c80 100644 --- a/drivers/fastboot/Kconfig +++ b/drivers/fastboot/Kconfig @@ -1,4 +1,5 @@ menu "Fastboot support" + depends on CMDLINE config FASTBOOT bool diff --git a/drivers/fastboot/fb_common.c b/drivers/fastboot/fb_common.c index 4e9d9b719c6..3576b067729 100644 --- a/drivers/fastboot/fb_common.c +++ b/drivers/fastboot/fb_common.c @@ -91,6 +91,7 @@ void fastboot_okay(const char *reason, char *response) */ int __weak fastboot_set_reboot_flag(enum fastboot_reboot_reason reason) { + int ret; static const char * const boot_cmds[] = { [FASTBOOT_REBOOT_REASON_BOOTLOADER] = "bootonce-bootloader", [FASTBOOT_REBOOT_REASON_FASTBOOTD] = "boot-fastboot", @@ -105,7 +106,18 @@ int __weak fastboot_set_reboot_flag(enum fastboot_reboot_reason reason) if (reason >= FASTBOOT_REBOOT_REASONS_COUNT) return -EINVAL; - return bcb_write_reboot_reason(mmc_dev, "misc", boot_cmds[reason]); + ret = bcb_find_partition_and_load("mmc", mmc_dev, "misc"); + if (ret) + goto out; + + ret = bcb_set(BCB_FIELD_COMMAND, boot_cmds[reason]); + if (ret) + goto out; + + ret = bcb_store(); +out: + bcb_reset(); + return ret; } /** diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c index b6c71789eec..eaa1d692898 100644 --- a/drivers/i2c/stm32f7_i2c.c +++ b/drivers/i2c/stm32f7_i2c.c @@ -20,6 +20,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/printk.h> +#include <linux/time.h> /* STM32 I2C registers */ struct stm32_i2c_regs { @@ -121,8 +122,6 @@ struct stm32_i2c_regs { #define STM32_SCLH_MAX BIT(8) #define STM32_SCLL_MAX BIT(8) -#define STM32_NSEC_PER_SEC 1000000000L - /** * struct stm32_i2c_spec - private i2c specification timing * @rate: I2C bus speed (Hz) @@ -591,7 +590,7 @@ static int stm32_i2c_choose_solution(u32 i2cclk, struct stm32_i2c_timings *s) { struct stm32_i2c_timings *v; - u32 i2cbus = DIV_ROUND_CLOSEST(STM32_NSEC_PER_SEC, + u32 i2cbus = DIV_ROUND_CLOSEST(NSEC_PER_SEC, setup->speed_freq); u32 clk_error_prev = i2cbus; u32 clk_min, clk_max; @@ -607,8 +606,8 @@ static int stm32_i2c_choose_solution(u32 i2cclk, dnf_delay = setup->dnf * i2cclk; tsync = af_delay_min + dnf_delay + (2 * i2cclk); - clk_max = STM32_NSEC_PER_SEC / specs->rate_min; - clk_min = STM32_NSEC_PER_SEC / specs->rate_max; + clk_max = NSEC_PER_SEC / specs->rate_min; + clk_min = NSEC_PER_SEC / specs->rate_max; /* * Among Prescaler possibilities discovered above figures out SCL Low @@ -686,7 +685,7 @@ static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv, const struct stm32_i2c_spec *specs; struct stm32_i2c_timings *v, *_v; struct list_head solutions; - u32 i2cclk = DIV_ROUND_CLOSEST(STM32_NSEC_PER_SEC, setup->clock_src); + u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC, setup->clock_src); int ret; specs = get_specs(setup->speed_freq); diff --git a/drivers/memory/stm32-fmc2-ebi.c b/drivers/memory/stm32-fmc2-ebi.c index 212bb4f5dc0..a722a3836f7 100644 --- a/drivers/memory/stm32-fmc2-ebi.c +++ b/drivers/memory/stm32-fmc2-ebi.c @@ -14,6 +14,7 @@ #include <linux/err.h> #include <linux/iopoll.h> #include <linux/ioport.h> +#include <linux/time.h> /* FMC2 Controller Registers */ #define FMC2_BCR1 0x0 @@ -90,8 +91,6 @@ #define FMC2_BTR_DATLAT_MAX 0xf #define FMC2_PCSCNTR_CSCOUNT_MAX 0xff -#define FMC2_NSEC_PER_SEC 1000000000L - enum stm32_fmc2_ebi_bank { FMC2_EBI1 = 0, FMC2_EBI2, @@ -279,7 +278,7 @@ static u32 stm32_fmc2_ebi_ns_to_clock_cycles(struct stm32_fmc2_ebi *ebi, int cs, u32 setup) { unsigned long hclk = clk_get_rate(&ebi->clk); - unsigned long hclkp = FMC2_NSEC_PER_SEC / (hclk / 1000); + unsigned long hclkp = NSEC_PER_SEC / (hclk / 1000); return DIV_ROUND_UP(setup * 1000, hclkp); } diff --git a/drivers/mmc/octeontx_hsmmc.h b/drivers/mmc/octeontx_hsmmc.h index 70844b1cbab..9849121f174 100644 --- a/drivers/mmc/octeontx_hsmmc.h +++ b/drivers/mmc/octeontx_hsmmc.h @@ -32,8 +32,6 @@ */ #define MMC_TIMEOUT_SHORT 20 -#define NSEC_PER_SEC 1000000000L - #define MAX_NO_OF_TAPS 64 #define EXT_CSD_POWER_CLASS 187 /* R/W */ diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index c638980ea2b..c2fc80b10f0 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -31,7 +31,7 @@ obj-$(CONFIG_NVMXIP) += nvmxip/ else ifneq ($(mtd-y),) -obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd.o +obj-$(CONFIG_SPL_MTD) += mtd.o endif obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += nand/ obj-$(CONFIG_SPL_ONENAND_SUPPORT) += onenand/ diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index a13e6f59cbd..bb9994b8626 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -447,6 +447,22 @@ config NAND_PXA3XX This enables the driver for the NAND flash device found on PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2). +config NAND_SANDBOX + bool "Support for NAND in sandbox" + depends on SANDBOX + select SYS_NAND_SELF_INIT + select SPL_SYS_NAND_SELF_INIT + select SPL_NAND_INIT + select SYS_NAND_SOFT_ECC + select BCH + select NAND_ECC_BCH + imply CMD_NAND + help + Enable a dummy NAND driver for sandbox. It simulates any number of + arbitrary NAND chips with a RAM buffer. It will also inject errors to + test ECC. At the moment, only 8-bit busses and single-chip devices are + supported. + config NAND_SUNXI bool "Support for NAND on Allwinner SoCs" default ARCH_SUNXI @@ -659,20 +675,13 @@ config SYS_NAND_ONFI_DETECTION And fetching device parameters flashed on device, by parsing ONFI parameter page. -config SYS_NAND_PAGE_COUNT - hex "NAND chip page count" - depends on SPL_NAND_SUPPORT && (NAND_ATMEL || NAND_MXC || \ - SPL_NAND_AM33XX_BCH || SPL_NAND_LOAD || SPL_NAND_SIMPLE || \ - NAND_OMAP_GPMC) - help - Number of pages in the NAND chip. - config SYS_NAND_PAGE_SIZE hex "NAND chip page size" depends on ARCH_SUNXI || NAND_OMAP_GPMC || NAND_LPC32XX_SLC || \ SPL_NAND_SIMPLE || (NAND_MXC && SPL_NAND_SUPPORT) || \ MVEBU_SPL_BOOT_DEVICE_NAND || \ - (NAND_ATMEL && SPL_NAND_SUPPORT) || SPL_GENERATE_ATMEL_PMECC_HEADER + (NAND_ATMEL && SPL_NAND_SUPPORT) || \ + SPL_GENERATE_ATMEL_PMECC_HEADER || NAND_SANDBOX depends on !NAND_MXS && !NAND_DENALI_DT && !NAND_LPC32XX_MLC && !NAND_MT7621 help Number of data bytes in one page for the NAND chip on the diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index add2b4cf655..ddbba899e58 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o +obj-$(CONFIG_NAND_SANDBOX) += sand_nand.o obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o obj-$(CONFIG_NAND_MXIC) += mxic_nand.o obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o diff --git a/drivers/mtd/nand/raw/am335x_spl_bch.c b/drivers/mtd/nand/raw/am335x_spl_bch.c index 6ab3f1f42c5..6831af98b73 100644 --- a/drivers/mtd/nand/raw/am335x_spl_bch.c +++ b/drivers/mtd/nand/raw/am335x_spl_bch.c @@ -11,6 +11,7 @@ #include <common.h> #include <nand.h> +#include <system-constants.h> #include <asm/io.h> #include <linux/delay.h> #include <linux/mtd/nand_ecc.h> @@ -32,7 +33,7 @@ static int nand_command(int block, int page, uint32_t offs, u8 cmd) { struct nand_chip *this = mtd_to_nand(mtd); - int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; + int page_addr = page + block * SYS_NAND_BLOCK_PAGES; void (*hwctrl)(struct mtd_info *mtd, int cmd, unsigned int ctrl) = this->cmd_ctrl; @@ -217,6 +218,11 @@ void nand_init(void) nand_command(0, 0, 0, NAND_CMD_RESET); } +unsigned int nand_page_size(void) +{ + return nand_to_mtd(&nand_chip)->writesize; +} + /* Unselect after operation */ void nand_deselect(void) { diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index fa962ba591c..5c0265ccf58 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -64,6 +64,7 @@ #include <linux/mfd/syscon/atmel-smc.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/mtd.h> +#include <linux/time.h> #include <mach/at91_sfr.h> #include <nand.h> #include <regmap.h> @@ -71,8 +72,6 @@ #include "pmecc.h" -#define NSEC_PER_SEC 1000000000L - #define ATMEL_HSMC_NFC_CFG 0x0 #define ATMEL_HSMC_NFC_CFG_SPARESIZE(x) (((x) / 4) << 24) #define ATMEL_HSMC_NFC_CFG_SPARESIZE_MASK GENMASK(30, 24) diff --git a/drivers/mtd/nand/raw/atmel_nand.c b/drivers/mtd/nand/raw/atmel_nand.c index 6b17e744a69..6d94e7af38e 100644 --- a/drivers/mtd/nand/raw/atmel_nand.c +++ b/drivers/mtd/nand/raw/atmel_nand.c @@ -12,6 +12,7 @@ #include <common.h> #include <log.h> +#include <system-constants.h> #include <asm/gpio.h> #include <asm/arch/gpio.h> #include <dm/device_compat.h> @@ -1258,7 +1259,7 @@ static struct nand_chip nand_chip; static int nand_command(int block, int page, uint32_t offs, u8 cmd) { struct nand_chip *this = mtd_to_nand(mtd); - int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; + int page_addr = page + block * SYS_NAND_BLOCK_PAGES; void (*hwctrl)(struct mtd_info *mtd, int cmd, unsigned int ctrl) = this->cmd_ctrl; @@ -1359,7 +1360,7 @@ int spl_nand_erase_one(int block, int page) if (nand_chip.select_chip) nand_chip.select_chip(mtd, 0); - page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; + page_addr = page + block * SYS_NAND_BLOCK_PAGES; hwctrl(mtd, NAND_CMD_ERASE1, NAND_CTRL_CLE | NAND_CTRL_CHANGE); /* Row address */ hwctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE | NAND_CTRL_CHANGE); @@ -1451,6 +1452,11 @@ void nand_init(void) nand_chip.select_chip(mtd, 0); } +unsigned int nand_page_size(void) +{ + return nand_to_mtd(&nand_chip)->writesize; +} + void nand_deselect(void) { if (nand_chip.select_chip) diff --git a/drivers/mtd/nand/raw/denali_spl.c b/drivers/mtd/nand/raw/denali_spl.c index 690279c9976..165a23312cb 100644 --- a/drivers/mtd/nand/raw/denali_spl.c +++ b/drivers/mtd/nand/raw/denali_spl.c @@ -234,4 +234,9 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst) return 0; } +unsigned int nand_page_size(void) +{ + return page_size; +} + void nand_deselect(void) {} diff --git a/drivers/mtd/nand/raw/fsl_ifc_spl.c b/drivers/mtd/nand/raw/fsl_ifc_spl.c index c67065eaf8c..69d26f1f79a 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_spl.c +++ b/drivers/mtd/nand/raw/fsl_ifc_spl.c @@ -106,6 +106,8 @@ static inline int bad_block(uchar *marker, int port_size) return __raw_readw((u16 *)marker) != 0xffff; } +static int saved_page_size; + int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) { struct fsl_ifc_fcm *gregs = (void *)CFG_SYS_IFC_ADDR; @@ -150,6 +152,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) if (port_size == 8) bad_marker = 5; } + saved_page_size = page_size; ver = ifc_in32(&gregs->ifc_rev); if (ver >= FSL_IFC_V2_0_0) @@ -302,6 +305,11 @@ void nand_init(void) { } +unsigned int nand_page_size(void) +{ + return saved_page_size; +} + void nand_deselect(void) { } diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c index ac2e669d46b..f8ae216d56c 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c @@ -765,4 +765,9 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst) return 0; } +unsigned int nand_page_size(void) +{ + return BYTES_PER_PAGE; +} + #endif /* CONFIG_SPL_BUILD */ diff --git a/drivers/mtd/nand/raw/mt7621_nand_spl.c b/drivers/mtd/nand/raw/mt7621_nand_spl.c index 114fc8b7cea..a2be9ba80e0 100644 --- a/drivers/mtd/nand/raw/mt7621_nand_spl.c +++ b/drivers/mtd/nand/raw/mt7621_nand_spl.c @@ -203,6 +203,11 @@ unsigned long nand_size(void) return SZ_2G; } +unsigned int nand_page_size(void) +{ + return nfc_dev.nand.mtd.writesize; +} + void nand_deselect(void) { } diff --git a/drivers/mtd/nand/raw/mxc_nand_spl.c b/drivers/mtd/nand/raw/mxc_nand_spl.c index 309e75d01e5..a855c9987f8 100644 --- a/drivers/mtd/nand/raw/mxc_nand_spl.c +++ b/drivers/mtd/nand/raw/mxc_nand_spl.c @@ -13,6 +13,7 @@ #include <common.h> #include <hang.h> #include <nand.h> +#include <system-constants.h> #include <linux/mtd/rawnand.h> #include <asm/arch/imx-regs.h> #include <asm/io.h> @@ -304,13 +305,13 @@ int nand_spl_load_image(uint32_t from, unsigned int size, void *buf) * Check if we have crossed a block boundary, and if so * check for bad block. */ - if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) { + if (!(page % SYS_NAND_BLOCK_PAGES)) { /* * Yes, new block. See if this block is good. If not, * loop until we find a good block. */ while (is_badblock(page)) { - page = page + CONFIG_SYS_NAND_PAGE_COUNT; + page = page + SYS_NAND_BLOCK_PAGES; /* Check i we've reached the end of flash. */ if (page >= maxpages) return -1; @@ -350,3 +351,8 @@ __used void nand_boot(void) void nand_init(void) {} void nand_deselect(void) {} + +unsigned int nand_page_size(void) +{ + return CONFIG_SYS_NAND_PAGE_SIZE; +} diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c index 65eab4c8088..fd65772af80 100644 --- a/drivers/mtd/nand/raw/mxs_nand.c +++ b/drivers/mtd/nand/raw/mxs_nand.c @@ -31,6 +31,7 @@ #include <linux/errno.h> #include <linux/mtd/rawnand.h> #include <linux/sizes.h> +#include <linux/time.h> #include <linux/types.h> #include <linux/math64.h> @@ -52,8 +53,6 @@ #endif #define MXS_NAND_BCH_TIMEOUT 10000 -#define USEC_PER_SEC 1000000 -#define NSEC_PER_SEC 1000000000L #define TO_CYCLES(duration, period) DIV_ROUND_UP_ULL(duration, period) diff --git a/drivers/mtd/nand/raw/mxs_nand_spl.c b/drivers/mtd/nand/raw/mxs_nand_spl.c index 300662994cf..f7d3f02f85a 100644 --- a/drivers/mtd/nand/raw/mxs_nand_spl.c +++ b/drivers/mtd/nand/raw/mxs_nand_spl.c @@ -295,6 +295,11 @@ int nand_default_bbt(struct mtd_info *mtd) return 0; } +unsigned int nand_page_size(void) +{ + return nand_to_mtd(&nand_chip)->writesize; +} + void nand_deselect(void) { } diff --git a/drivers/mtd/nand/raw/nand.c b/drivers/mtd/nand/raw/nand.c index eacd99c4e27..4c18861aa25 100644 --- a/drivers/mtd/nand/raw/nand.c +++ b/drivers/mtd/nand/raw/nand.c @@ -60,13 +60,11 @@ int nand_register(int devnum, struct mtd_info *mtd) sprintf(dev_name[devnum], "nand%d", devnum); mtd->name = dev_name[devnum]; -#ifdef CONFIG_MTD /* * Add MTD device so that we can reference it later * via the mtdcore infrastructure (e.g. ubi). */ add_mtd_device(mtd); -#endif total_nand_size += mtd->size / 1024; @@ -76,6 +74,23 @@ int nand_register(int devnum, struct mtd_info *mtd) return 0; } +void nand_unregister(struct mtd_info *mtd) +{ + int devnum = nand_mtd_to_devnum(mtd); + + if (devnum < 0) + return; + + if (nand_curr_device == devnum) + nand_curr_device = -1; + + total_nand_size -= mtd->size / 1024; + + del_mtd_device(nand_info[devnum]); + + nand_info[devnum] = NULL; +} + #if !CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT) static void nand_init_chip(int i) { @@ -100,6 +115,8 @@ static void nand_init_chip(int i) #endif #ifdef CONFIG_MTD_CONCAT +struct mtd_info *concat_mtd; + static void create_mtd_concat(void) { struct mtd_info *nand_info_list[CONFIG_SYS_MAX_NAND_DEVICE]; @@ -114,28 +131,40 @@ static void create_mtd_concat(void) } } if (nand_devices_found > 1) { - struct mtd_info *mtd; char c_mtd_name[16]; /* * We detected multiple devices. Concatenate them together. */ sprintf(c_mtd_name, "nand%d", nand_devices_found); - mtd = mtd_concat_create(nand_info_list, nand_devices_found, - c_mtd_name); + concat_mtd = mtd_concat_create(nand_info_list, + nand_devices_found, c_mtd_name); - if (mtd == NULL) + if (!concat_mtd) return; - nand_register(nand_devices_found, mtd); + nand_register(nand_devices_found, concat_mtd); } return; } + +static void destroy_mtd_concat(void) +{ + if (!concat_mtd) + return; + + mtd_concat_destroy(concat_mtd); + concat_mtd = NULL; +} #else static void create_mtd_concat(void) { } + +static void destroy_mtd_concat(void) +{ +} #endif unsigned long nand_size(void) @@ -143,10 +172,10 @@ unsigned long nand_size(void) return total_nand_size; } +static int initialized; + void nand_init(void) { - static int initialized; - /* * Avoid initializing NAND Flash multiple times, * otherwise it will calculate a wrong total size. @@ -174,3 +203,22 @@ void nand_init(void) create_mtd_concat(); } + +void nand_reinit(void) +{ + int i; + + destroy_mtd_concat(); + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + assert(!nand_info[i]); + + initialized = 0; + nand_init(); +} + +unsigned int nand_page_size(void) +{ + struct mtd_info *mtd = get_nand_dev_by_index(nand_curr_device); + + return mtd ? mtd->writesize : 1; +} diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 6b4adcf6bdc..44b6cb63a01 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -4462,17 +4462,14 @@ ident_done: else if (chip->jedec_version) pr_info("%s %s\n", manufacturer_desc->name, chip->jedec_params.model); - else + else if (manufacturer_desc) pr_info("%s %s\n", manufacturer_desc->name, type->name); #else if (chip->jedec_version) pr_info("%s %s\n", manufacturer_desc->name, chip->jedec_params.model); - else + else if (manufacturer_desc) pr_info("%s %s\n", manufacturer_desc->name, type->name); - - pr_info("%s %s\n", manufacturer_desc->name, - type->name); #endif pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n", diff --git a/drivers/mtd/nand/raw/nand_spl_loaders.c b/drivers/mtd/nand/raw/nand_spl_loaders.c index 156b44d8358..db4213ea3dc 100644 --- a/drivers/mtd/nand/raw/nand_spl_loaders.c +++ b/drivers/mtd/nand/raw/nand_spl_loaders.c @@ -12,8 +12,11 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst) while (block <= lastblock) { if (!nand_is_bad_block(block)) { /* Skip bad blocks */ - while (page < CONFIG_SYS_NAND_PAGE_COUNT) { + while (size && page < SYS_NAND_BLOCK_PAGES) { nand_read_page(block, page, dst); + + size -= min(size, CONFIG_SYS_NAND_PAGE_SIZE - + page_offset); /* * When offs is not aligned to page address the * extra offset is copied to dst as well. Copy diff --git a/drivers/mtd/nand/raw/nand_spl_simple.c b/drivers/mtd/nand/raw/nand_spl_simple.c index 2f3af9edd4c..80d6e0e1e4e 100644 --- a/drivers/mtd/nand/raw/nand_spl_simple.c +++ b/drivers/mtd/nand/raw/nand_spl_simple.c @@ -6,6 +6,7 @@ #include <common.h> #include <nand.h> +#include <system-constants.h> #include <asm/io.h> #include <linux/mtd/nand_ecc.h> #include <linux/mtd/rawnand.h> @@ -27,7 +28,7 @@ static int nand_command(int block, int page, uint32_t offs, u8 cmd) { struct nand_chip *this = mtd_to_nand(mtd); - int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; + int page_addr = page + block * SYS_NAND_BLOCK_PAGES; while (!this->dev_ready(mtd)) ; @@ -59,7 +60,7 @@ static int nand_command(int block, int page, uint32_t offs, u8 cmd) { struct nand_chip *this = mtd_to_nand(mtd); - int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; + int page_addr = page + block * SYS_NAND_BLOCK_PAGES; void (*hwctrl)(struct mtd_info *mtd, int cmd, unsigned int ctrl) = this->cmd_ctrl; @@ -226,6 +227,11 @@ void nand_init(void) nand_chip.select_chip(mtd, 0); } +unsigned int nand_page_size(void) +{ + return nand_to_mtd(&nand_chip)->writesize; +} + /* Unselect after operation */ void nand_deselect(void) { diff --git a/drivers/mtd/nand/raw/octeontx_nand.c b/drivers/mtd/nand/raw/octeontx_nand.c index 65a03d22c1d..3b20685fac0 100644 --- a/drivers/mtd/nand/raw/octeontx_nand.c +++ b/drivers/mtd/nand/raw/octeontx_nand.c @@ -24,6 +24,7 @@ #include <linux/mtd/nand_bch.h> #include <linux/mtd/nand_ecc.h> #include <linux/mtd/rawnand.h> +#include <linux/time.h> #include <asm/global_data.h> #include <asm/io.h> #include <asm/types.h> @@ -291,7 +292,6 @@ union ndf_cmd { #define OCTEONTX_NAND_DRIVER_NAME "octeontx_nand" #define NDF_TIMEOUT 1000 /** Timeout in ms */ -#define USEC_PER_SEC 1000000 /** Linux compatibility */ #ifndef NAND_MAX_CHIPS # define NAND_MAX_CHIPS 8 /** Linux compatibility */ #endif diff --git a/drivers/mtd/nand/raw/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c index 1a5ed0de31a..0e25bd5dc28 100644 --- a/drivers/mtd/nand/raw/omap_gpmc.c +++ b/drivers/mtd/nand/raw/omap_gpmc.c @@ -6,6 +6,7 @@ #include <common.h> #include <log.h> +#include <system-constants.h> #include <asm/io.h> #include <dm/uclass.h> #include <linux/errno.h> @@ -1298,7 +1299,7 @@ static int nand_is_bad_block(int block) static int nand_read_page(int block, int page, uchar *dst) { - int page_addr = block * CONFIG_SYS_NAND_PAGE_COUNT + page; + int page_addr = block * SYS_NAND_BLOCK_PAGES + page; loff_t ofs = page_addr * CONFIG_SYS_NAND_PAGE_SIZE; int ret; size_t len = CONFIG_SYS_NAND_PAGE_SIZE; diff --git a/drivers/mtd/nand/raw/sand_nand.c b/drivers/mtd/nand/raw/sand_nand.c new file mode 100644 index 00000000000..229d7b5b65a --- /dev/null +++ b/drivers/mtd/nand/raw/sand_nand.c @@ -0,0 +1,707 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) Sean Anderson <seanga2@gmail.com> + */ + +#define LOG_CATEGORY UCLASS_MTD +#include <errno.h> +#include <hexdump.h> +#include <log.h> +#include <nand.h> +#include <os.h> +#include <rand.h> +#include <spl.h> +#include <system-constants.h> +#include <dm/device_compat.h> +#include <dm/read.h> +#include <dm/uclass.h> +#include <asm/bitops.h> +#include <linux/bitmap.h> +#include <linux/mtd/rawnand.h> +#include <linux/sizes.h> + +enum sand_nand_state { + STATE_READY, + STATE_IDLE, + STATE_READ, + STATE_READ_ID, + STATE_READ_ONFI, + STATE_PARAM_ONFI, + STATE_STATUS, + STATE_PROG, + STATE_ERASE, +}; + +static const char *const state_name[] = { + [STATE_READY] = "READY", + [STATE_IDLE] = "IDLE", + [STATE_READ] = "READ", + [STATE_READ_ID] = "READ_ID", + [STATE_READ_ONFI] = "READ_ONFI", + [STATE_PARAM_ONFI] = "PARAM_ONFI", + [STATE_STATUS] = "STATUS", + [STATE_PROG] = "PROG", + [STATE_ERASE] = "ERASE", +}; + +/** + * struct sand_nand_chip - Per-device private data + * @nand: The nand chip + * @node: The next device in this controller + * @programmed: Bitmap of whether sectors are programmed + * @id: ID to report for NAND_CMD_READID + * @id_len: Length of @id + * @onfi: Three copies of ONFI parameter page + * @status: Status to report for NAND_CMD_STATUS + * @chunksize: Size of one "chunk" (page + oob) in bytes + * @pageize: Size of one page in bytes + * @pages: Total number of pages + * @pages_per_erase: Number of pages per eraseblock + * @err_count: Number of errors to inject per @err_step_bits of data + * @err_step_bits: Number of data bits per error "step" + * @err_steps: Number of err steps in a page + * @cs: Chip select for this device + * @state: Current state of the device + * @column: Column of the most-recent command + * @page_addr: Page address of the most-recent command + * @fd: File descriptor for the backing data + * @fd_page_addr: Page address that @fd is seek'd to + * @selected: Whether this device is selected + * @tmp: "Cache" buffer used to store transferred data before committing it + * @tmp_dirty: Whether @tmp is dirty (modified) or clean (all ones) + * + * Data is stored with the OOB area in-line. For example, with 512-byte pages + * and and 16-byte OOB areas, the first page would start at offset 0, the second + * at offset 528, the third at offset 1056, and so on + */ +struct sand_nand_chip { + struct nand_chip nand; + struct list_head node; + long *programmed; + const u8 *id; + u32 chunksize, pagesize, pages, pages_per_erase; + u32 err_count, err_step_bits, err_steps, ecc_bits; + unsigned int cs; + enum sand_nand_state state; + int column, page_addr, fd, fd_page_addr; + bool selected, tmp_dirty; + u8 status; + u8 id_len; + u8 tmp[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE]; + u8 onfi[sizeof(struct nand_onfi_params) * 3]; +}; + +#define SAND_DEBUG(chip, fmt, ...) \ + dev_dbg((chip)->nand.mtd.dev, "%u (%s): " fmt, (chip)->cs, \ + state_name[(chip)->state], ##__VA_ARGS__) + +static inline void to_state(struct sand_nand_chip *chip, + enum sand_nand_state new_state) +{ + if (new_state != chip->state) + SAND_DEBUG(chip, "to state %s\n", state_name[new_state]); + chip->state = new_state; +} + +static inline struct sand_nand_chip *to_sand_nand(struct nand_chip *nand) +{ + return container_of(nand, struct sand_nand_chip, nand); +} + +struct sand_nand_priv { + struct list_head chips; +}; + +static int sand_nand_dev_ready(struct mtd_info *mtd) +{ + return 1; +} + +static int sand_nand_wait(struct mtd_info *mtd, struct nand_chip *chip) +{ + u8 status; + + return nand_status_op(chip, &status) ?: status; +} + +static int sand_nand_seek(struct sand_nand_chip *chip) +{ + if (chip->fd_page_addr == chip->page_addr) + return 0; + + if (os_lseek(chip->fd, (off_t)chip->page_addr * chip->chunksize, + OS_SEEK_SET) < 0) { + SAND_DEBUG(chip, "could not seek: %d\n", errno); + return -EIO; + } + + chip->fd_page_addr = chip->page_addr; + return 0; +} + +static void sand_nand_inject_error(struct sand_nand_chip *chip, + unsigned int step, unsigned int pos) +{ + int byte, index; + + if (pos < chip->err_step_bits) { + __change_bit(step * chip->err_step_bits + pos, chip->tmp); + return; + } + + /* + * Only ECC bytes are covered in the OOB area, so + * pretend that those are the only bytes which can have + * errors. + */ + byte = (pos - chip->err_step_bits + step * chip->ecc_bits) / 8; + index = chip->nand.ecc.layout->eccpos[byte]; + /* Avoid endianness issues by working with bytes */ + chip->tmp[chip->pagesize + index] ^= BIT(pos & 0x7); +} + +static int sand_nand_read(struct sand_nand_chip *chip) +{ + unsigned int i, stop = 0; + + if (chip->column == chip->pagesize) + stop = chip->err_step_bits; + + if (test_bit(chip->page_addr, chip->programmed)) { + if (sand_nand_seek(chip)) + return -EIO; + + if (os_read(chip->fd, chip->tmp, chip->chunksize) != + chip->chunksize) { + SAND_DEBUG(chip, "could not read: %d\n", errno); + return -EIO; + } + chip->fd_page_addr++; + } else if (chip->tmp_dirty) { + memset(chip->tmp + chip->column, 0xff, + chip->chunksize - chip->column); + } + + /* + * Inject some errors; this is Method A from "An Efficient Algorithm for + * Sequential Random Sampling" (Vitter 87). This is still slow when + * generating a lot (dozens) of ECC errors. + * + * To avoid generating too many errors in any one ECC step, we separate + * our error generation by ECC step. + */ + chip->tmp_dirty = true; + for (i = 0; i < chip->err_steps; i++) { + u32 bit_errors = chip->err_count; + unsigned int j = chip->err_step_bits + chip->ecc_bits; + + while (bit_errors) { + unsigned int u = rand(); + float quot = 1ULL << 32; + + do { + quot *= j - bit_errors; + quot /= j; + j--; + + if (j < stop) + goto next; + } while (u < quot); + + sand_nand_inject_error(chip, i, j); + bit_errors--; + } +next: + ; + } + + return 0; +} + +static void sand_nand_command(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct sand_nand_chip *chip = to_sand_nand(nand); + enum sand_nand_state new_state = chip->state; + + SAND_DEBUG(chip, "command=%02x column=%d page_addr=%d\n", command, + column, page_addr); + + if (!chip->selected) + return; + + switch (chip->state) { + case STATE_READY: + if (command == NAND_CMD_RESET) + goto reset; + break; + case STATE_PROG: + new_state = STATE_IDLE; + if (command != NAND_CMD_PAGEPROG || + test_and_set_bit(chip->page_addr, chip->programmed)) { + chip->status |= NAND_STATUS_FAIL; + break; + } + + if (sand_nand_seek(chip)) { + chip->status |= NAND_STATUS_FAIL; + break; + } + + if (os_write(chip->fd, chip->tmp, chip->chunksize) != + chip->chunksize) { + SAND_DEBUG(chip, "could not write: %d\n", errno); + chip->status |= NAND_STATUS_FAIL; + break; + } + + chip->fd_page_addr++; + break; + case STATE_ERASE: + new_state = STATE_IDLE; + if (command != NAND_CMD_ERASE2) { + chip->status |= NAND_STATUS_FAIL; + break; + } + + if (chip->page_addr < 0 || + chip->page_addr >= chip->pages || + chip->page_addr % chip->pages_per_erase) + chip->status |= NAND_STATUS_FAIL; + else + bitmap_clear(chip->programmed, chip->page_addr, + chip->pages_per_erase); + break; + default: + chip->column = column; + chip->page_addr = page_addr; + switch (command) { + case NAND_CMD_READOOB: + if (column >= 0) + chip->column += chip->pagesize; + fallthrough; + case NAND_CMD_READ0: + new_state = STATE_IDLE; + if (page_addr < 0 || page_addr >= chip->pages) + break; + + if (chip->column < 0 || chip->column >= chip->chunksize) + break; + + if (sand_nand_read(chip)) + break; + + chip->page_addr = page_addr; + new_state = STATE_READ; + break; + case NAND_CMD_ERASE1: + new_state = STATE_ERASE; + chip->status = ~NAND_STATUS_FAIL; + break; + case NAND_CMD_STATUS: + new_state = STATE_STATUS; + chip->column = 0; + break; + case NAND_CMD_SEQIN: + new_state = STATE_PROG; + chip->status = ~NAND_STATUS_FAIL; + if (page_addr < 0 || page_addr >= chip->pages || + chip->column < 0 || + chip->column >= chip->chunksize) { + chip->status |= NAND_STATUS_FAIL; + } else if (chip->tmp_dirty) { + memset(chip->tmp, 0xff, chip->chunksize); + chip->tmp_dirty = false; + } + break; + case NAND_CMD_READID: + if (chip->onfi[0] && column == 0x20) + new_state = STATE_READ_ONFI; + else + new_state = STATE_READ_ID; + chip->column = 0; + break; + case NAND_CMD_PARAM: + if (chip->onfi[0] && !column) + new_state = STATE_PARAM_ONFI; + else + new_state = STATE_IDLE; + break; + case NAND_CMD_RESET: +reset: + new_state = STATE_IDLE; + chip->column = -1; + chip->page_addr = -1; + chip->status = ~NAND_STATUS_FAIL; + break; + default: + new_state = STATE_IDLE; + SAND_DEBUG(chip, "Unsupported command %02x\n", command); + } + } + + to_state(chip, new_state); +} + +static void sand_nand_select_chip(struct mtd_info *mtd, int n) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct sand_nand_chip *chip = to_sand_nand(nand); + + chip->selected = !n; +} + +static void sand_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct sand_nand_chip *chip = to_sand_nand(nand); + unsigned int to_copy; + int src_len = 0; + const u8 *src = NULL; + + if (!chip->selected) + goto copy; + + switch (chip->state) { + case STATE_READ: + src = chip->tmp; + src_len = chip->chunksize; + break; + case STATE_READ_ID: + src = chip->id; + src_len = chip->id_len; + break; + case STATE_READ_ONFI: + src = "ONFI"; + src_len = 4; + break; + case STATE_PARAM_ONFI: + src = chip->onfi; + src_len = sizeof(chip->onfi); + break; + case STATE_STATUS: + src = &chip->status; + src_len = 1; + break; + default: + break; + } + +copy: + if (chip->column >= 0) + to_copy = max(min(len, src_len - chip->column), 0); + else + to_copy = 0; + memcpy(buf, src + chip->column, to_copy); + memset(buf + to_copy, 0xff, len - to_copy); + chip->column += to_copy; + + if (len == 1) { + SAND_DEBUG(chip, "read [ %02x ]\n", buf[0]); + } else if (src_len) { + SAND_DEBUG(chip, "read %d bytes\n", len); +#ifdef VERBOSE_DEBUG + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); +#endif + } + + if (src_len && chip->column == src_len) + to_state(chip, STATE_IDLE); +} + +static u8 sand_nand_read_byte(struct mtd_info *mtd) +{ + u8 ret; + + sand_nand_read_buf(mtd, &ret, 1); + return ret; +} + +static u16 sand_nand_read_word(struct mtd_info *mtd) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct sand_nand_chip *chip = to_sand_nand(nand); + + SAND_DEBUG(chip, "16-bit access unsupported\n"); + return sand_nand_read_byte(mtd) | 0xff00; +} + +static void sand_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct sand_nand_chip *chip = to_sand_nand(nand); + + SAND_DEBUG(chip, "write %d bytes\n", len); +#ifdef VERBOSE_DEBUG + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); +#endif + + if (chip->state != STATE_PROG || chip->status & NAND_STATUS_FAIL) + return; + + chip->tmp_dirty = true; + len = min((unsigned int)len, chip->chunksize - chip->column); + memcpy(chip->tmp + chip->column, buf, len); + chip->column += len; +} + +static struct nand_chip *nand_chip; + +int sand_nand_remove(struct udevice *dev) +{ + struct sand_nand_priv *priv = dev_get_priv(dev); + struct sand_nand_chip *chip; + + list_for_each_entry(chip, &priv->chips, node) { + struct nand_chip *nand = &chip->nand; + + if (nand_chip == nand) + nand_chip = NULL; + + nand_unregister(nand_to_mtd(nand)); + free(chip->programmed); + os_close(chip->fd); + free(chip); + } + + return 0; +} + +static int sand_nand_probe(struct udevice *dev) +{ + struct sand_nand_priv *priv = dev_get_priv(dev); + struct sand_nand_chip *chip; + int ret, devnum = 0; + ofnode np; + + INIT_LIST_HEAD(&priv->chips); + + dev_for_each_subnode(np, dev) { + struct nand_chip *nand; + struct mtd_info *mtd; + u32 erasesize, oobsize, pagesize, pages; + u32 err_count, err_step_size; + off_t expected_size; + char filename[30]; + fdt_addr_t cs; + const u8 *id, *onfi; + int id_len, onfi_len; + + cs = ofnode_get_addr_size_index_notrans(np, 0, NULL); + if (cs == FDT_ADDR_T_NONE) { + dev_dbg(dev, "Invalid cs for chip %s\n", + ofnode_get_name(np)); + ret = -ENOENT; + goto err; + } + + id = ofnode_read_prop(np, "sandbox,id", &id_len); + if (!id) { + dev_dbg(dev, "No sandbox,id property for chip %s\n", + ofnode_get_name(np)); + ret = -EINVAL; + goto err; + } + + onfi = ofnode_read_prop(np, "sandbox,onfi", &onfi_len); + if (onfi && onfi_len != sizeof(struct nand_onfi_params)) { + dev_dbg(dev, "Invalid length %d for onfi params\n", + onfi_len); + ret = -EINVAL; + goto err; + } + + ret = ofnode_read_u32(np, "sandbox,erasesize", &erasesize); + if (ret) { + dev_dbg(dev, "No sandbox,erasesize property for chip %s", + ofnode_get_name(np)); + goto err; + } + + ret = ofnode_read_u32(np, "sandbox,oobsize", &oobsize); + if (ret) { + dev_dbg(dev, "No sandbox,oobsize property for chip %s", + ofnode_get_name(np)); + goto err; + } + + ret = ofnode_read_u32(np, "sandbox,pagesize", &pagesize); + if (ret) { + dev_dbg(dev, "No sandbox,pagesize property for chip %s", + ofnode_get_name(np)); + goto err; + } + + ret = ofnode_read_u32(np, "sandbox,pages", &pages); + if (ret) { + dev_dbg(dev, "No sandbox,pages property for chip %s", + ofnode_get_name(np)); + goto err; + } + + ret = ofnode_read_u32(np, "sandbox,err-count", &err_count); + if (ret) { + dev_dbg(dev, + "No sandbox,err-count property for chip %s", + ofnode_get_name(np)); + goto err; + } + + ret = ofnode_read_u32(np, "sandbox,err-step-size", + &err_step_size); + if (ret) { + dev_dbg(dev, + "No sandbox,err-step-size property for chip %s", + ofnode_get_name(np)); + goto err; + } + + chip = calloc(sizeof(*chip), 1); + if (!chip) { + ret = -ENOMEM; + goto err; + } + + chip->cs = cs; + chip->id = id; + chip->id_len = id_len; + chip->chunksize = pagesize + oobsize; + chip->pagesize = pagesize; + chip->pages = pages; + chip->pages_per_erase = erasesize / pagesize; + memset(chip->tmp, 0xff, chip->chunksize); + + chip->err_count = err_count; + chip->err_step_bits = err_step_size * 8; + chip->err_steps = pagesize / err_step_size; + + expected_size = (off_t)pages * chip->chunksize; + snprintf(filename, sizeof(filename), + "/tmp/u-boot.nand%d.XXXXXX", devnum); + chip->fd = os_mktemp(filename, expected_size); + if (chip->fd < 0) { + dev_dbg(dev, "Could not create temp file %s\n", + filename); + ret = chip->fd; + goto err_chip; + } + + chip->programmed = calloc(sizeof(long), + BITS_TO_LONGS(pages)); + if (!chip->programmed) { + ret = -ENOMEM; + goto err_fd; + } + + if (onfi) { + memcpy(chip->onfi, onfi, onfi_len); + memcpy(chip->onfi + onfi_len, onfi, onfi_len); + memcpy(chip->onfi + 2 * onfi_len, onfi, onfi_len); + } + + nand = &chip->nand; + nand->options = spl_in_proper() ? 0 : NAND_SKIP_BBTSCAN; + nand->flash_node = np; + nand->dev_ready = sand_nand_dev_ready; + nand->cmdfunc = sand_nand_command; + nand->waitfunc = sand_nand_wait; + nand->select_chip = sand_nand_select_chip; + nand->read_byte = sand_nand_read_byte; + nand->read_word = sand_nand_read_word; + nand->read_buf = sand_nand_read_buf; + nand->write_buf = sand_nand_write_buf; + nand->ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; + + mtd = nand_to_mtd(nand); + mtd->dev = dev; + + ret = nand_scan(mtd, CONFIG_SYS_NAND_MAX_CHIPS); + if (ret) { + dev_dbg(dev, "Could not scan chip %s: %d\n", + ofnode_get_name(np), ret); + goto err_prog; + } + chip->ecc_bits = nand->ecc.layout->eccbytes * 8 / + chip->err_steps; + + ret = nand_register(devnum, mtd); + if (ret) { + dev_dbg(dev, "Could not register nand %d: %d\n", devnum, + ret); + goto err_prog; + } + + if (!nand_chip) + nand_chip = nand; + + list_add_tail(&chip->node, &priv->chips); + devnum++; + continue; + +err_prog: + free(chip->programmed); +err_fd: + os_close(chip->fd); +err_chip: + free(chip); + goto err; + } + + return 0; + +err: + sand_nand_remove(dev); + return ret; +} + +static const struct udevice_id sand_nand_ids[] = { + { .compatible = "sandbox,nand" }, + { } +}; + +U_BOOT_DRIVER(sand_nand) = { + .name = "sand-nand", + .id = UCLASS_MTD, + .of_match = sand_nand_ids, + .probe = sand_nand_probe, + .remove = sand_nand_remove, + .priv_auto = sizeof(struct sand_nand_priv), +}; + +void board_nand_init(void) +{ + struct udevice *dev; + int err; + + err = uclass_get_device_by_driver(UCLASS_MTD, DM_DRIVER_REF(sand_nand), + &dev); + if (err && err != -ENODEV) + log_info("Failed to get sandbox NAND: %d\n", err); +} + +#if IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_NAND_INIT) +void nand_deselect(void) +{ + nand_chip->select_chip(nand_to_mtd(nand_chip), -1); +} + +static int nand_is_bad_block(int block) +{ + struct mtd_info *mtd = nand_to_mtd(nand_chip); + + return mtd_block_isbad(mtd, block << mtd->erasesize_shift); +} + +static int nand_read_page(int block, int page, uchar *dst) +{ + struct mtd_info *mtd = nand_to_mtd(nand_chip); + loff_t ofs = ((loff_t)block << mtd->erasesize_shift) + + ((loff_t)page << mtd->writesize_shift); + size_t len = mtd->writesize; + + return nand_read(mtd, ofs, &len, dst); +} + +#include "nand_spl_loaders.c" +#endif /* CONFIG_SPL_NAND_INIT */ diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c index 64be6486b4e..3528824575b 100644 --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c @@ -22,6 +22,7 @@ #include <linux/ioport.h> #include <linux/mtd/rawnand.h> #include <linux/printk.h> +#include <linux/time.h> /* Bad block marker length */ #define FMC2_BBM_LEN 2 @@ -127,8 +128,6 @@ #define FMC2_BCHDSR4_EBP7 GENMASK(12, 0) #define FMC2_BCHDSR4_EBP8 GENMASK(28, 16) -#define FMC2_NSEC_PER_SEC 1000000000L - #define FMC2_TIMEOUT_5S 5000000 enum stm32_fmc2_ecc { @@ -603,7 +602,7 @@ static void stm32_fmc2_nfc_calc_timings(struct nand_chip *chip, struct stm32_fmc2_nand *nand = to_fmc2_nand(chip); struct stm32_fmc2_timings *tims = &nand->timings; unsigned long hclk = clk_get_rate(&nfc->clk); - unsigned long hclkp = FMC2_NSEC_PER_SEC / (hclk / 1000); + unsigned long hclkp = NSEC_PER_SEC / (hclk / 1000); unsigned long timing, tar, tclr, thiz, twait; unsigned long tset_mem, tset_att, thold_mem, thold_att; diff --git a/drivers/mtd/nand/raw/sunxi_nand_spl.c b/drivers/mtd/nand/raw/sunxi_nand_spl.c index 6de0b0a3554..c9b8c78ed75 100644 --- a/drivers/mtd/nand/raw/sunxi_nand_spl.c +++ b/drivers/mtd/nand/raw/sunxi_nand_spl.c @@ -524,9 +524,10 @@ static int nand_read_buffer(struct nfc_config *conf, uint32_t offs, return 0; } +static struct nfc_config conf; + int nand_spl_load_image(uint32_t offs, unsigned int size, void *dest) { - static struct nfc_config conf = { }; int ret; ret = nand_detect_config(&conf, offs, dest); @@ -536,6 +537,11 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *dest) return nand_read_buffer(&conf, offs, size, dest); } +unsigned int nand_page_size(void) +{ + return conf.page_size; +} + void nand_deselect(void) { struct sunxi_ccm_reg *const ccm = diff --git a/drivers/mtd/onenand/onenand_uboot.c b/drivers/mtd/onenand/onenand_uboot.c index 04791df69bb..ecacabefadc 100644 --- a/drivers/mtd/onenand/onenand_uboot.c +++ b/drivers/mtd/onenand/onenand_uboot.c @@ -44,14 +44,12 @@ void onenand_init(void) puts("Flex-"); puts("OneNAND: "); -#ifdef CONFIG_MTD /* * Add MTD device so that we can reference it later * via the mtdcore infrastructure (e.g. ubi). */ onenand_mtd.name = dev_name; add_mtd_device(&onenand_mtd); -#endif } print_size(onenand_chip.chipsize, "\n"); } diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ebab4d9f2e5..23ad2c29d0a 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -471,14 +471,6 @@ config SYS_UNIFY_CACHE depends on MCFFEC bool "Invalidate icache during ethernet operations" -config FSLDMAFEC - bool "ColdFire DMA Ethernet Support" - select PHYLIB - select SYS_DISCOVER_PHY - help - This driver supports the network interface units in the - ColdFire family. - config KS8851_MLL bool "Microchip KS8851-MLL controller driver" help diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1ce6fea323c..f9aed1646c9 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -37,7 +37,6 @@ obj-$(CONFIG_ETH_SANDBOX_RAW) += sandbox-raw.o obj-$(CONFIG_FEC_MXC) += fec_mxc.o obj-$(CONFIG_FMAN_ENET) += fm/ obj-$(CONFIG_FMAN_ENET) += fsl_mdio.o -obj-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o obj-$(CONFIG_FSL_LS_MDIO) += fsl_ls_mdio.o obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/ diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 7dfa8219094..a8caa0f0927 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -3,7 +3,6 @@ * Copyright 2009-2011 Freescale Semiconductor, Inc. * Dave Liu <daveliu@freescale.com> */ -#include <common.h> #include <env.h> #include <fs_loader.h> #include <image.h> diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c deleted file mode 100644 index cc61a107403..00000000000 --- a/drivers/net/fsl_mcdmafec.c +++ /dev/null @@ -1,592 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * Conversion to DM - * (C) 2019 Angelo Dureghello <angelo.dureghello@timesys.com> - */ - -#include <common.h> -#include <env.h> -#include <hang.h> -#include <malloc.h> -#include <command.h> -#include <config.h> -#include <net.h> -#include <miiphy.h> -#include <asm/global_data.h> -#include <linux/delay.h> -#include <linux/mii.h> -#include <asm/immap.h> -#include <asm/fsl_mcdmafec.h> - -#include "MCD_dma.h" - -#undef ET_DEBUG -#undef MII_DEBUG - -/* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 -#define PKT_MAXBUF_SIZE 1518 -#define FIFO_ERRSTAT (FIFO_STAT_RXW | FIFO_STAT_UF | FIFO_STAT_OF) - -/* RxBD bits definitions */ -#define BD_ENET_RX_ERR (BD_ENET_RX_LG | BD_ENET_RX_NO | BD_ENET_RX_CR | \ - BD_ENET_RX_OV | BD_ENET_RX_TR) - -DECLARE_GLOBAL_DATA_PTR; - -static void init_eth_info(struct fec_info_dma *info) -{ - /* setup Receive and Transmit buffer descriptor */ -#ifdef CFG_SYS_FEC_BUF_USE_SRAM - static u32 tmp; - - if (info->index == 0) - tmp = CFG_SYS_INIT_RAM_ADDR + 0x1000; - else - info->rxbd = (cbd_t *)DBUF_LENGTH; - - info->rxbd = (cbd_t *)((u32)info->rxbd + tmp); - tmp = (u32)info->rxbd; - info->txbd = - (cbd_t *)((u32)info->txbd + tmp + - (PKTBUFSRX * sizeof(cbd_t))); - tmp = (u32)info->txbd; - info->txbuf = - (char *)((u32)info->txbuf + tmp + - (CFG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); - tmp = (u32)info->txbuf; -#else - info->rxbd = - (cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE, - (PKTBUFSRX * sizeof(cbd_t))); - info->txbd = - (cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE, - (CFG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); - info->txbuf = - (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH); -#endif - -#ifdef ET_DEBUG - printf("rxbd %x txbd %x\n", (int)info->rxbd, (int)info->txbd); -#endif - info->phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32); -} - -static void fec_halt(struct udevice *dev) -{ - struct fec_info_dma *info = dev_get_priv(dev); - volatile fecdma_t *fecp = (fecdma_t *)info->iobase; - int counter = 0xffff; - - /* issue graceful stop command to the FEC transmitter if necessary */ - fecp->tcr |= FEC_TCR_GTS; - - /* wait for graceful stop to register */ - while ((counter--) && (!(fecp->eir & FEC_EIR_GRA))) - ; - - /* Disable DMA tasks */ - MCD_killDma(info->tx_task); - MCD_killDma(info->rx_task); - - /* Disable the Ethernet Controller */ - fecp->ecr &= ~FEC_ECR_ETHER_EN; - - /* Clear FIFO status registers */ - fecp->rfsr &= FIFO_ERRSTAT; - fecp->tfsr &= FIFO_ERRSTAT; - - fecp->frst = 0x01000000; - - /* Issue a reset command to the FEC chip */ - fecp->ecr |= FEC_ECR_RESET; - - /* wait at least 20 clock cycles */ - mdelay(10); - -#ifdef ET_DEBUG - printf("Ethernet task stopped\n"); -#endif -} - -#ifdef ET_DEBUG -static void dbg_fec_regs(struct eth_device *dev) -{ - struct fec_info_dma *info = dev->priv; - volatile fecdma_t *fecp = (fecdma_t *)info->iobase; - - printf("=====\n"); - printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir); - printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr); - printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr); - printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr); - printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr); - printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc); - printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr); - printf("r hash %x - %x\n", (int)&fecp->rhr, fecp->rhr); - printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr); - printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr); - printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur); - printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd); - printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur); - printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr); - printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur); - printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr); - printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr); - printf("r_fdata %x - %x\n", (int)&fecp->rfdr, fecp->rfdr); - printf("r_fstat %x - %x\n", (int)&fecp->rfsr, fecp->rfsr); - printf("r_fctrl %x - %x\n", (int)&fecp->rfcr, fecp->rfcr); - printf("r_flrfp %x - %x\n", (int)&fecp->rlrfp, fecp->rlrfp); - printf("r_flwfp %x - %x\n", (int)&fecp->rlwfp, fecp->rlwfp); - printf("r_frfar %x - %x\n", (int)&fecp->rfar, fecp->rfar); - printf("r_frfrp %x - %x\n", (int)&fecp->rfrp, fecp->rfrp); - printf("r_frfwp %x - %x\n", (int)&fecp->rfwp, fecp->rfwp); - printf("t_fdata %x - %x\n", (int)&fecp->tfdr, fecp->tfdr); - printf("t_fstat %x - %x\n", (int)&fecp->tfsr, fecp->tfsr); - printf("t_fctrl %x - %x\n", (int)&fecp->tfcr, fecp->tfcr); - printf("t_flrfp %x - %x\n", (int)&fecp->tlrfp, fecp->tlrfp); - printf("t_flwfp %x - %x\n", (int)&fecp->tlwfp, fecp->tlwfp); - printf("t_ftfar %x - %x\n", (int)&fecp->tfar, fecp->tfar); - printf("t_ftfrp %x - %x\n", (int)&fecp->tfrp, fecp->tfrp); - printf("t_ftfwp %x - %x\n", (int)&fecp->tfwp, fecp->tfwp); - printf("frst %x - %x\n", (int)&fecp->frst, fecp->frst); - printf("ctcwr %x - %x\n", (int)&fecp->ctcwr, fecp->ctcwr); -} -#endif - -static void set_fec_duplex_speed(volatile fecdma_t *fecp, int dup_spd) -{ - struct bd_info *bd = gd->bd; - - if ((dup_spd >> 16) == FULL) { - /* Set maximum frame length */ - fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE | - FEC_RCR_PROM | 0x100; - fecp->tcr = FEC_TCR_FDEN; - } else { - /* Half duplex mode */ - fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | - FEC_RCR_MII_MODE | FEC_RCR_DRT; - fecp->tcr &= ~FEC_TCR_FDEN; - } - - if ((dup_spd & 0xFFFF) == _100BASET) { -#ifdef MII_DEBUG - printf("100Mbps\n"); -#endif - bd->bi_ethspeed = 100; - } else { -#ifdef MII_DEBUG - printf("10Mbps\n"); -#endif - bd->bi_ethspeed = 10; - } -} - -static void fec_set_hwaddr(volatile fecdma_t *fecp, u8 *mac) -{ - u8 curr_byte; /* byte for which to compute the CRC */ - int byte; /* loop - counter */ - int bit; /* loop - counter */ - u32 crc = 0xffffffff; /* initial value */ - - for (byte = 0; byte < 6; byte++) { - curr_byte = mac[byte]; - for (bit = 0; bit < 8; bit++) { - if ((curr_byte & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - curr_byte >>= 1; - } - } - - crc = crc >> 26; - - /* Set individual hash table register */ - if (crc >= 32) { - fecp->ialr = (1 << (crc - 32)); - fecp->iaur = 0; - } else { - fecp->ialr = 0; - fecp->iaur = (1 << crc); - } - - /* Set physical address */ - fecp->palr = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; - fecp->paur = (mac[4] << 24) + (mac[5] << 16) + 0x8808; - - /* Clear multicast address hash table */ - fecp->gaur = 0; - fecp->galr = 0; -} - -static int fec_init(struct udevice *dev) -{ - struct fec_info_dma *info = dev_get_priv(dev); - volatile fecdma_t *fecp = (fecdma_t *)info->iobase; - int rval, i; - uchar enetaddr[6]; - -#ifdef ET_DEBUG - printf("fec_init: iobase 0x%08x ...\n", info->iobase); -#endif - - fecpin_setclear(info, 1); - fec_halt(dev); - - mii_init(); - set_fec_duplex_speed(fecp, info->dup_spd); - - /* We use strictly polling mode only */ - fecp->eimr = 0; - - /* Clear any pending interrupt */ - fecp->eir = 0xffffffff; - - /* Set station address */ - if (info->index == 0) - rval = eth_env_get_enetaddr("ethaddr", enetaddr); - else - rval = eth_env_get_enetaddr("eth1addr", enetaddr); - - if (!rval) { - puts("Please set a valid MAC address\n"); - return -EINVAL; - } - - fec_set_hwaddr(fecp, enetaddr); - - /* Set Opcode/Pause Duration Register */ - fecp->opd = 0x00010020; - - /* Setup Buffers and Buffer Descriptors */ - info->rx_idx = 0; - info->tx_idx = 0; - - /* Setup Receiver Buffer Descriptors (13.14.24.18) - * Settings: Empty, Wrap */ - for (i = 0; i < PKTBUFSRX; i++) { - info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - info->rxbd[i].cbd_datlen = PKTSIZE_ALIGN; - info->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i]; - } - info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) - * Settings: Last, Tx CRC */ - for (i = 0; i < CFG_SYS_TX_ETH_BUFFER; i++) { - info->txbd[i].cbd_sc = 0; - info->txbd[i].cbd_datlen = 0; - info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]); - } - info->txbd[CFG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP; - - info->used_tbd_idx = 0; - info->clean_tbd_num = CFG_SYS_TX_ETH_BUFFER; - - /* Set Rx FIFO alarm and granularity value */ - fecp->rfcr = 0x0c000000; - fecp->rfar = 0x0000030c; - - /* Set Tx FIFO granularity value */ - fecp->tfcr = FIFO_CTRL_FRAME | FIFO_CTRL_GR(6) | 0x00040000; - fecp->tfar = 0x00000080; - - fecp->tfwr = 0x2; - fecp->ctcwr = 0x03000000; - - /* Enable DMA receive task */ - MCD_startDma(info->rx_task, - (s8 *)info->rxbd, - 0, - (s8 *)&fecp->rfdr, - 4, - 0, - 4, - info->rx_init, - info->rx_pri, - (MCD_FECRX_DMA | MCD_TT_FLAGS_DEF), - (MCD_NO_CSUM | MCD_NO_BYTE_SWAP) - ); - - /* Enable DMA tx task with no ready buffer descriptors */ - MCD_startDma(info->tx_task, - (s8 *)info->txbd, - 0, - (s8 *)&fecp->tfdr, - 4, - 0, - 4, - info->tx_init, - info->tx_pri, - (MCD_FECTX_DMA | MCD_TT_FLAGS_DEF), - (MCD_NO_CSUM | MCD_NO_BYTE_SWAP) - ); - - /* Now enable the transmit and receive processing */ - fecp->ecr |= FEC_ECR_ETHER_EN; - - return 0; -} - -static int mcdmafec_init(struct udevice *dev) -{ - return fec_init(dev); -} - -static int mcdmafec_send(struct udevice *dev, void *packet, int length) -{ - struct fec_info_dma *info = dev_get_priv(dev); - cbd_t *p_tbd, *p_used_tbd; - u16 phy_status; - - miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phy_status); - - /* process all the consumed TBDs */ - while (info->clean_tbd_num < CFG_SYS_TX_ETH_BUFFER) { - p_used_tbd = &info->txbd[info->used_tbd_idx]; - if (p_used_tbd->cbd_sc & BD_ENET_TX_READY) { -#ifdef ET_DEBUG - printf("Cannot clean TBD %d, in use\n", - info->clean_tbd_num); -#endif - return 0; - } - - /* clean this buffer descriptor */ - if (info->used_tbd_idx == (CFG_SYS_TX_ETH_BUFFER - 1)) - p_used_tbd->cbd_sc = BD_ENET_TX_WRAP; - else - p_used_tbd->cbd_sc = 0; - - /* update some indeces for a correct handling of TBD ring */ - info->clean_tbd_num++; - info->used_tbd_idx = (info->used_tbd_idx + 1) - % CFG_SYS_TX_ETH_BUFFER; - } - - /* Check for valid length of data. */ - if (length > 1500 || length <= 0) - return -1; - - /* Check the number of vacant TxBDs. */ - if (info->clean_tbd_num < 1) { - printf("No available TxBDs ...\n"); - return -1; - } - - /* Get the first TxBD to send the mac header */ - p_tbd = &info->txbd[info->tx_idx]; - p_tbd->cbd_datlen = length; - p_tbd->cbd_bufaddr = (u32)packet; - p_tbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY; - info->tx_idx = (info->tx_idx + 1) % CFG_SYS_TX_ETH_BUFFER; - - /* Enable DMA transmit task */ - MCD_continDma(info->tx_task); - - info->clean_tbd_num -= 1; - - /* wait until frame is sent . */ - while (p_tbd->cbd_sc & BD_ENET_TX_READY) - udelay(10); - - return (int)(info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_STATS); -} - -static int mcdmafec_recv(struct udevice *dev, int flags, uchar **packetp) -{ - struct fec_info_dma *info = dev_get_priv(dev); - volatile fecdma_t *fecp = (fecdma_t *)info->iobase; - - cbd_t *prbd = &info->rxbd[info->rx_idx]; - u32 ievent; - int frame_length, len = 0; - - /* Check if any critical events have happened */ - ievent = fecp->eir; - if (ievent != 0) { - fecp->eir = ievent; - - if (ievent & (FEC_EIR_BABT | FEC_EIR_TXERR | FEC_EIR_RXERR)) { - printf("fec_recv: error\n"); - fec_halt(dev); - fec_init(dev); - return 0; - } - - if (ievent & FEC_EIR_HBERR) { - /* Heartbeat error */ - fecp->tcr |= FEC_TCR_GTS; - } - - if (ievent & FEC_EIR_GRA) { - /* Graceful stop complete */ - if (fecp->tcr & FEC_TCR_GTS) { - printf("fec_recv: tcr_gts\n"); - fec_halt(dev); - fecp->tcr &= ~FEC_TCR_GTS; - fec_init(dev); - } - } - } - - if (!(prbd->cbd_sc & BD_ENET_RX_EMPTY)) { - if ((prbd->cbd_sc & BD_ENET_RX_LAST) && - !(prbd->cbd_sc & BD_ENET_RX_ERR) && - ((prbd->cbd_datlen - 4) > 14)) { - /* Get buffer address and size */ - frame_length = prbd->cbd_datlen - 4; - - /* Fill the buffer and pass it to upper layers */ - net_process_received_packet((uchar *)prbd->cbd_bufaddr, - frame_length); - len = frame_length; - } - - /* Reset buffer descriptor as empty */ - if (info->rx_idx == (PKTBUFSRX - 1)) - prbd->cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); - else - prbd->cbd_sc = BD_ENET_RX_EMPTY; - - prbd->cbd_datlen = PKTSIZE_ALIGN; - - /* Now, we have an empty RxBD, restart the DMA receive task */ - MCD_continDma(info->rx_task); - - /* Increment BD count */ - info->rx_idx = (info->rx_idx + 1) % PKTBUFSRX; - } - - return len; -} - -static void mcdmafec_halt(struct udevice *dev) -{ - fec_halt(dev); -} - -static const struct eth_ops mcdmafec_ops = { - .start = mcdmafec_init, - .send = mcdmafec_send, - .recv = mcdmafec_recv, - .stop = mcdmafec_halt, -}; - -/* - * Boot sequence, called just after mcffec_of_to_plat, - * as DM way, it replaces old mcffec_initialize. - */ -static int mcdmafec_probe(struct udevice *dev) -{ - struct fec_info_dma *info = dev_get_priv(dev); - struct eth_pdata *pdata = dev_get_plat(dev); - int node = dev_of_offset(dev); - int retval; - const u32 *val; - - info->index = dev_seq(dev); - info->iobase = pdata->iobase; - info->miibase = pdata->iobase; - info->phy_addr = -1; - - val = fdt_getprop(gd->fdt_blob, node, "rx-task", NULL); - if (val) - info->rx_task = fdt32_to_cpu(*val); - - val = fdt_getprop(gd->fdt_blob, node, "tx-task", NULL); - if (val) - info->tx_task = fdt32_to_cpu(*val); - - val = fdt_getprop(gd->fdt_blob, node, "rx-prioprity", NULL); - if (val) - info->rx_pri = fdt32_to_cpu(*val); - - val = fdt_getprop(gd->fdt_blob, node, "tx-prioprity", NULL); - if (val) - info->tx_pri = fdt32_to_cpu(*val); - - val = fdt_getprop(gd->fdt_blob, node, "rx-init", NULL); - if (val) - info->rx_init = fdt32_to_cpu(*val); - - val = fdt_getprop(gd->fdt_blob, node, "tx-init", NULL); - if (val) - info->tx_init = fdt32_to_cpu(*val); - -#ifdef CFG_SYS_FEC_BUF_USE_SRAM - u32 tmp = CFG_SYS_INIT_RAM_ADDR + 0x1000; -#endif - init_eth_info(info); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - info->bus = mdio_alloc(); - if (!info->bus) - return -ENOMEM; - strlcpy(info->bus->name, dev->name, MDIO_NAME_LEN); - info->bus->read = mcffec_miiphy_read; - info->bus->write = mcffec_miiphy_write; - - retval = mdio_register(info->bus); - if (retval < 0) - return retval; -#endif - - return 0; -} - -static int mcdmafec_remove(struct udevice *dev) -{ - struct fec_info_dma *priv = dev_get_priv(dev); - - mdio_unregister(priv->bus); - mdio_free(priv->bus); - - return 0; -} - -/* - * Boot sequence, called 1st - */ -static int mcdmafec_of_to_plat(struct udevice *dev) -{ - struct eth_pdata *pdata = dev_get_plat(dev); - const u32 *val; - - pdata->iobase = dev_read_addr(dev); - /* Default to 10Mbit/s */ - pdata->max_speed = 10; - - val = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "max-speed", NULL); - if (val) - pdata->max_speed = fdt32_to_cpu(*val); - - return 0; -} - -static const struct udevice_id mcdmafec_ids[] = { - { .compatible = "fsl,mcf-dma-fec" }, - { } -}; - -U_BOOT_DRIVER(mcffec) = { - .name = "mcdmafec", - .id = UCLASS_ETH, - .of_match = mcdmafec_ids, - .of_to_plat = mcdmafec_of_to_plat, - .probe = mcdmafec_probe, - .remove = mcdmafec_remove, - .ops = &mcdmafec_ops, - .priv_auto = sizeof(struct fec_info_dma), - .plat_auto = sizeof(struct eth_pdata), -}; diff --git a/drivers/net/qe/uccf.c b/drivers/net/qe/uccf.c index 306f1ea1db6..00848a1a37d 100644 --- a/drivers/net/qe/uccf.c +++ b/drivers/net/qe/uccf.c @@ -6,7 +6,6 @@ * based on source code of Shlomi Gridish */ -#include <common.h> #include <malloc.h> #include <linux/errno.h> #include <asm/io.h> diff --git a/drivers/phy/meson-axg-mipi-dphy.c b/drivers/phy/meson-axg-mipi-dphy.c index cf2a1cd14c7..a69b6c97594 100644 --- a/drivers/phy/meson-axg-mipi-dphy.c +++ b/drivers/phy/meson-axg-mipi-dphy.c @@ -25,6 +25,7 @@ #include <linux/bitops.h> #include <linux/compat.h> #include <linux/bitfield.h> +#include <linux/time.h> /* [31] soft reset for the phy. * 1: reset. 0: dessert the reset. @@ -170,8 +171,6 @@ #define MIPI_DSI_TEST_CTRL0 0x3c #define MIPI_DSI_TEST_CTRL1 0x40 -#define NSEC_PER_MSEC 1000000L - struct phy_meson_axg_mipi_dphy_priv { struct regmap *regmap; #if CONFIG_IS_ENABLED(CLK) diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c index ba5f6486126..bb61816add2 100644 --- a/drivers/phy/phy-core-mipi-dphy.c +++ b/drivers/phy/phy-core-mipi-dphy.c @@ -6,11 +6,10 @@ #include <common.h> #include <div64.h> +#include <linux/time.h> #include <phy-mipi-dphy.h> -#define PSEC_PER_SEC 1000000000000LL - /* * Minimum D-PHY timings based on MIPI D-PHY specification. Derived * from the valid ranges specified in Section 6.9, Table 14, Page 41 diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c index 9ed7af0d6ef..5be76e05339 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c @@ -15,6 +15,7 @@ #include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/math64.h> +#include <linux/time.h> #include <phy-mipi-dphy.h> #include <reset.h> @@ -186,8 +187,6 @@ #define DSI_PHY_STATUS 0xb0 #define PHY_LOCK BIT(0) -#define PSEC_PER_SEC 1000000000000LL - #define msleep(a) udelay(a * 1000) enum phy_max_rate { diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c index 8bb7588714a..7120b8edba0 100644 --- a/drivers/pinctrl/pinctrl_stm32.c +++ b/drivers/pinctrl/pinctrl_stm32.c @@ -505,6 +505,8 @@ static const struct udevice_id stm32_pinctrl_ids[] = { { .compatible = "st,stm32mp157-pinctrl" }, { .compatible = "st,stm32mp157-z-pinctrl" }, { .compatible = "st,stm32mp135-pinctrl" }, + { .compatible = "st,stm32mp257-pinctrl" }, + { .compatible = "st,stm32mp257-z-pinctrl" }, { } }; diff --git a/drivers/pwm/pwm-aspeed.c b/drivers/pwm/pwm-aspeed.c index ba98641c866..b03472d2345 100644 --- a/drivers/pwm/pwm-aspeed.c +++ b/drivers/pwm/pwm-aspeed.c @@ -49,6 +49,7 @@ #include <dm/device_compat.h> #include <linux/math64.h> #include <linux/bitfield.h> +#include <linux/time.h> #include <asm/io.h> /* The channel number of Aspeed pwm controller */ @@ -77,8 +78,6 @@ /* PWM fixed value */ #define PWM_ASPEED_FIXED_PERIOD 0xff -#define NSEC_PER_SEC 1000000000L - struct aspeed_pwm_priv { struct clk clk; struct regmap *regmap; diff --git a/drivers/pwm/pwm-at91.c b/drivers/pwm/pwm-at91.c index 95597aee557..3ff1fb6d5c3 100644 --- a/drivers/pwm/pwm-at91.c +++ b/drivers/pwm/pwm-at91.c @@ -14,11 +14,11 @@ #include <dm.h> #include <linux/bitops.h> #include <linux/io.h> +#include <linux/time.h> #include <pwm.h> #define PERIOD_BITS 16 #define PWM_MAX_PRES 10 -#define NSEC_PER_SEC 1000000000L #define PWM_ENA 0x04 #define PWM_CHANNEL_OFFSET 0x20 diff --git a/drivers/pwm/pwm-cadence-ttc.c b/drivers/pwm/pwm-cadence-ttc.c index dc3b314b0cc..d9f6736a7ae 100644 --- a/drivers/pwm/pwm-cadence-ttc.c +++ b/drivers/pwm/pwm-cadence-ttc.c @@ -17,6 +17,7 @@ #include <linux/bitfield.h> #include <linux/math64.h> #include <linux/log2.h> +#include <linux/time.h> #include <dm/device_compat.h> #define CLOCK_CONTROL 0 @@ -37,8 +38,6 @@ #define COUNTER_INTERVAL_ENABLE BIT(1) #define COUNTER_COUNTING_DISABLE BIT(0) -#define NSEC_PER_SEC 1000000000L - #define TTC_REG(reg, channel) ((reg) + (channel) * sizeof(u32)) #define TTC_CLOCK_CONTROL(reg, channel) \ TTC_REG((reg) + CLOCK_CONTROL, (channel)) diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index 2311910a636..60959720dac 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -26,8 +26,7 @@ #include <linux/math64.h> #include <linux/bitfield.h> #include <linux/clk-provider.h> - -#define NSEC_PER_SEC 1000000000L +#include <linux/time.h> #define REG_PWM_A 0x0 #define REG_PWM_B 0x4 diff --git a/drivers/pwm/pwm-mtk.c b/drivers/pwm/pwm-mtk.c index 11e74440197..ad845ed9662 100644 --- a/drivers/pwm/pwm-mtk.c +++ b/drivers/pwm/pwm-mtk.c @@ -12,6 +12,7 @@ #include <div64.h> #include <linux/bitops.h> #include <linux/io.h> +#include <linux/time.h> /* PWM registers and bits definitions */ #define PWMCON 0x00 @@ -27,8 +28,6 @@ #define PWM_CLK_DIV_MAX 7 #define MAX_PWM_NUM 8 -#define NSEC_PER_SEC 1000000000L - enum mtk_pwm_reg_ver { PWM_REG_V1, PWM_REG_V2, diff --git a/drivers/pwm/pwm-ti-ehrpwm.c b/drivers/pwm/pwm-ti-ehrpwm.c index f09914519bd..fefa3c65ec4 100644 --- a/drivers/pwm/pwm-ti-ehrpwm.c +++ b/drivers/pwm/pwm-ti-ehrpwm.c @@ -14,8 +14,7 @@ #include <dm/device_compat.h> #include <pwm.h> #include <asm/io.h> - -#define NSEC_PER_SEC 1000000000L +#include <linux/time.h> /* Time base module registers */ #define TI_EHRPWM_TBCTL 0x00 diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c index 6195c7c4442..fa9e4065560 100644 --- a/drivers/qe/fdt.c +++ b/drivers/qe/fdt.c @@ -6,7 +6,6 @@ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. */ -#include <common.h> #include <asm/global_data.h> #include <linux/libfdt.h> #include <fdt_support.h> diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 2825dc6f9aa..9631337b8d9 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -6,7 +6,6 @@ * based on source code of Shlomi Gridish */ -#include <common.h> #include <malloc.h> #include <command.h> #include <asm/global_data.h> @@ -24,6 +23,9 @@ #include <asm/armv8/mmu.h> #include <asm/arch/cpu.h> #endif +#ifdef CONFIG_PPC +#include <asm/ppc.h> +#endif #define MPC85xx_DEVDISR_QE_DISABLE 0x1 diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index a8014129d33..7e21c4ae2bb 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1,46 +1,9 @@ config SCSI - bool "Support SCSI controllers" + bool "Support SCSI controllers with driver model" help This enables support for SCSI (Small Computer System Interface), a parallel interface widely used with storage peripherals such as hard drives and optical drives. The SCSI standards define physical interfaces as well as protocols for controlling devices and - tranferring data. - -config DM_SCSI - bool "Support SCSI controllers with driver model" - help - This option enables the SCSI (Small Computer System Interface) uclass - which supports SCSI and SATA HDDs. For every device configuration - (IDs/LUNs) a block device is created with RAW read/write and - filesystem support. - -if SCSI && !DM_SCSI - -config SCSI_AHCI_PLAT - bool "Platform-specific init of AHCI" - help - This enables a way for boards to set up an AHCI device manually, by - called ahci_init() and providing an ahci_reset() mechanism. - - This is deprecated. An AHCI driver should be provided instead. - -config SYS_SCSI_MAX_SCSI_ID - int "Maximum supported SCSI ID" - default 1 - help - Sets the maximum number of SCSI IDs to scan when looking for devices. - IDs from 0 to (this value - 1) are scanned. - - This is deprecated and is not needed when BLK is enabled. - -config SYS_SCSI_MAX_LUN - int "Maximum support SCSI LUN" - default 1 - help - Sets the maximum number of SCSI Logical Unit Numbers (LUNs) to scan on - devices. LUNs from 0 to (this value - 1) are scanned. - - This is deprecated and is not needed when CONFIG_DM_SCSI is enabled. - -endif + tranferring data. For every device configuration (IDs/LUNs) a block + device is created with RAW read/write and filesystem support. diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index d8d6de59090..628be4c89fb 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -4,25 +4,16 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_DM_SCSI) += scsi-uclass.o -obj-$(CONFIG_SCSI) += scsi.o - +obj-$(CONFIG_SCSI) += scsi.o scsi-uclass.o ifdef CONFIG_SCSI -ifdef CONFIG_DM_SCSI obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += scsi_bootdev.o +obj-$(CONFIG_SANDBOX) += sandbox_scsi.o +obj-$(CONFIG_SANDBOX) += scsi_emul.o endif endif -endif - ifdef CONFIG_SPL_BUILD ifdef CONFIG_SPL_SATA -obj-$(CONFIG_DM_SCSI) += scsi-uclass.o -obj-$(CONFIG_SCSI) += scsi.o +obj-$(CONFIG_SCSI) += scsi.o scsi-uclass.o endif endif - -ifdef CONFIG_SCSI -obj-$(CONFIG_SANDBOX) += sandbox_scsi.o -obj-$(CONFIG_SANDBOX) += scsi_emul.o -endif diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 1330482c167..79ee400d12f 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -21,38 +21,10 @@ #include <dm/device-internal.h> #include <dm/uclass-internal.h> -#if !defined(CONFIG_DM_SCSI) -# ifdef CFG_SCSI_DEV_LIST -# define SCSI_DEV_LIST CFG_SCSI_DEV_LIST -# else -# ifdef CONFIG_SATA_ULI5288 - -# define SCSI_VEND_ID 0x10b9 -# define SCSI_DEV_ID 0x5288 - -# elif !defined(CONFIG_SCSI_AHCI_PLAT) -# error no scsi device defined -# endif -# define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} -# endif -#endif - -#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) && \ - !defined(CONFIG_DM_SCSI) -const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; -#endif static struct scsi_cmd tempccb; /* temporary scsi command buffer */ DEFINE_CACHE_ALIGN_BUFFER(u8, tempbuff, 512); /* temporary data buffer */ -#if !defined(CONFIG_DM_SCSI) -static int scsi_max_devs; /* number of highest available scsi device */ - -static int scsi_curr_dev; /* current device */ - -static struct blk_desc scsi_dev_desc[SCSI_MAX_DEVICE]; -#endif - /* almost the maximum amount of the scsi_ext command.. */ #define SCSI_MAX_BLK 0xFFFF #define SCSI_LBA48_READ 0xFFFFFFF @@ -107,7 +79,6 @@ static void scsi_setup_inquiry(struct scsi_cmd *pccb) pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ } -#ifdef CONFIG_BLK static void scsi_setup_read_ext(struct scsi_cmd *pccb, lbaint_t start, unsigned short blocks) { @@ -286,59 +257,6 @@ static int scsi_buffer_aligned(struct udevice *dev, struct bounce_buffer *state) return 1; } #endif /* CONFIG_BOUNCE_BUFFER */ -#endif - -#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) && \ - !defined(CONFIG_DM_SCSI) -void scsi_init(void) -{ - int busdevfunc = -1; - int i; - /* - * Find a device from the list, this driver will support a single - * controller. - */ - for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { - /* get PCI Device ID */ - struct udevice *dev; - int ret; - - ret = dm_pci_find_device(scsi_device_list[i].vendor, - scsi_device_list[i].device, 0, &dev); - if (!ret) { - busdevfunc = dm_pci_get_bdf(dev); - break; - } - if (busdevfunc != -1) - break; - } - - if (busdevfunc == -1) { - printf("Error: SCSI Controller(s) "); - for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { - printf("%04X:%04X ", - scsi_device_list[i].vendor, - scsi_device_list[i].device); - } - printf("not found\n"); - return; - } -#ifdef DEBUG - else { - printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n", - scsi_device_list[i].vendor, - scsi_device_list[i].device, - (busdevfunc >> 16) & 0xFF, - (busdevfunc >> 11) & 0x1F, - (busdevfunc >> 8) & 0x7); - } -#endif - bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci"); - scsi_low_level_init(busdevfunc); - scsi_scan(true); - bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI); -} -#endif /* copy src to dest, skipping leading and trailing blanks * and null terminate the string @@ -462,25 +380,6 @@ static void scsi_init_dev_desc_priv(struct blk_desc *dev_desc) #endif /* CONFIG_BOUNCE_BUFFER */ } -#if !defined(CONFIG_DM_SCSI) -/** - * scsi_init_dev_desc - initialize all SCSI specific blk_desc properties - * - * @dev_desc: Block device description pointer - * @devnum: Device number - */ -static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum) -{ - dev_desc->lba = 0; - dev_desc->blksz = 0; - dev_desc->uclass_id = UCLASS_SCSI; - dev_desc->devnum = devnum; - dev_desc->part_type = PART_TYPE_UNKNOWN; - - scsi_init_dev_desc_priv(dev_desc); -} -#endif - /** * scsi_detect_dev - Detect scsi device * @@ -569,7 +468,6 @@ removable: * (re)-scan the scsi bus and reports scsi device info * to the user if mode = 1 */ -#if defined(CONFIG_DM_SCSI) static int do_scsi_scan_one(struct udevice *dev, int id, int lun, bool verbose) { int ret; @@ -690,48 +588,7 @@ int scsi_scan(bool verbose) return 0; } -#else -int scsi_scan(bool verbose) -{ - unsigned char i, lun; - int ret; - - if (verbose) - printf("scanning bus for devices...\n"); - for (i = 0; i < SCSI_MAX_DEVICE; i++) - scsi_init_dev_desc(&scsi_dev_desc[i], i); - - scsi_max_devs = 0; - for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { - for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) { - struct blk_desc *bdesc = &scsi_dev_desc[scsi_max_devs]; - - ret = scsi_detect_dev(NULL, i, lun, bdesc); - if (ret) - continue; - part_init(bdesc); - - if (verbose) { - printf(" Device %d: ", bdesc->devnum); - dev_print(bdesc); - } - scsi_max_devs++; - } /* next LUN */ - } - if (scsi_max_devs > 0) - scsi_curr_dev = 0; - else - scsi_curr_dev = -1; - - printf("Found %d device(s).\n", scsi_max_devs); -#ifndef CONFIG_SPL_BUILD - env_set_ulong("scsidevs", scsi_max_devs); -#endif - return 0; -} -#endif -#ifdef CONFIG_BLK static const struct blk_ops scsi_blk_ops = { .read = scsi_read, .write = scsi_write, @@ -745,11 +602,3 @@ U_BOOT_DRIVER(scsi_blk) = { .id = UCLASS_BLK, .ops = &scsi_blk_ops, }; -#else -U_BOOT_LEGACY_BLK(scsi) = { - .uclass_idname = "scsi", - .uclass_id = UCLASS_SCSI, - .max_devs = SCSI_MAX_DEVICE, - .desc = scsi_dev_desc, -}; -#endif diff --git a/drivers/serial/serial_msm_geni.c b/drivers/serial/serial_msm_geni.c index 78fd9389c03..b8bc61451a0 100644 --- a/drivers/serial/serial_msm_geni.c +++ b/drivers/serial/serial_msm_geni.c @@ -13,14 +13,13 @@ #include <dm.h> #include <errno.h> #include <linux/delay.h> +#include <linux/time.h> #include <misc.h> #include <serial.h> #define UART_OVERSAMPLING 32 #define STALE_TIMEOUT 160 -#define USEC_PER_SEC 1000000L - /* Registers*/ #define GENI_FORCE_DEFAULT_REG 0x20 #define GENI_SER_M_CLK_CFG 0x48 diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c index 23d476fba28..fb039546a41 100644 --- a/drivers/serial/serial_stm32.c +++ b/drivers/serial/serial_stm32.c @@ -30,7 +30,7 @@ */ #define ONE_BYTE_B115200_US 87 -static void _stm32_serial_setbrg(fdt_addr_t base, +static void _stm32_serial_setbrg(void __iomem *base, struct stm32_uart_info *uart_info, u32 clock_rate, int baudrate) @@ -75,7 +75,7 @@ static int stm32_serial_setconfig(struct udevice *dev, uint serial_config) struct stm32x7_serial_plat *plat = dev_get_plat(dev); bool stm32f4 = plat->uart_info->stm32f4; u8 uart_enable_bit = plat->uart_info->uart_enable_bit; - u32 cr1 = plat->base + CR1_OFFSET(stm32f4); + void __iomem *cr1 = plat->base + CR1_OFFSET(stm32f4); u32 config = 0; uint parity = SERIAL_GET_PARITY(serial_config); uint bits = SERIAL_GET_BITS(serial_config); @@ -122,7 +122,7 @@ static int stm32_serial_getc(struct udevice *dev) { struct stm32x7_serial_plat *plat = dev_get_plat(dev); bool stm32f4 = plat->uart_info->stm32f4; - fdt_addr_t base = plat->base; + void __iomem *base = plat->base; u32 isr = readl(base + ISR_OFFSET(stm32f4)); if ((isr & USART_ISR_RXNE) == 0) @@ -141,7 +141,7 @@ static int stm32_serial_getc(struct udevice *dev) return readl(base + RDR_OFFSET(stm32f4)); } -static int _stm32_serial_putc(fdt_addr_t base, +static int _stm32_serial_putc(void __iomem *base, struct stm32_uart_info *uart_info, const char c) { @@ -166,7 +166,7 @@ static int stm32_serial_pending(struct udevice *dev, bool input) { struct stm32x7_serial_plat *plat = dev_get_plat(dev); bool stm32f4 = plat->uart_info->stm32f4; - fdt_addr_t base = plat->base; + void __iomem *base = plat->base; if (input) return readl(base + ISR_OFFSET(stm32f4)) & @@ -176,7 +176,7 @@ static int stm32_serial_pending(struct udevice *dev, bool input) USART_ISR_TXE ? 0 : 1; } -static void _stm32_serial_init(fdt_addr_t base, +static void _stm32_serial_init(void __iomem *base, struct stm32_uart_info *uart_info) { bool stm32f4 = uart_info->stm32f4; @@ -250,11 +250,14 @@ static const struct udevice_id stm32_serial_id[] = { static int stm32_serial_of_to_plat(struct udevice *dev) { struct stm32x7_serial_plat *plat = dev_get_plat(dev); + fdt_addr_t addr; - plat->base = dev_read_addr(dev); - if (plat->base == FDT_ADDR_T_NONE) + addr = dev_read_addr(dev); + if (addr == FDT_ADDR_T_NONE) return -EINVAL; + plat->base = (void __iomem *)addr; + return 0; } @@ -297,7 +300,7 @@ static inline struct stm32_uart_info *_debug_uart_info(void) static inline void _debug_uart_init(void) { - fdt_addr_t base = CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); struct stm32_uart_info *uart_info = _debug_uart_info(); _stm32_serial_init(base, uart_info); @@ -308,7 +311,7 @@ static inline void _debug_uart_init(void) static inline void _debug_uart_putc(int c) { - fdt_addr_t base = CONFIG_VAL(DEBUG_UART_BASE); + void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); struct stm32_uart_info *uart_info = _debug_uart_info(); while (_stm32_serial_putc(base, uart_info, c) == -EAGAIN) diff --git a/drivers/serial/serial_stm32.h b/drivers/serial/serial_stm32.h index b7e7a90b931..d2c92ba48ea 100644 --- a/drivers/serial/serial_stm32.h +++ b/drivers/serial/serial_stm32.h @@ -49,7 +49,7 @@ struct stm32_uart_info stm32h7_info = { /* Information about a serial port */ struct stm32x7_serial_plat { - fdt_addr_t base; /* address of registers in physical memory */ + void __iomem *base; /* address of registers in physical memory */ struct stm32_uart_info *uart_info; unsigned long int clock_rate; }; diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c index cc3a54f2958..b0c656dbb4f 100644 --- a/drivers/spi/cadence_qspi.c +++ b/drivers/spi/cadence_qspi.c @@ -18,12 +18,11 @@ #include <linux/err.h> #include <linux/errno.h> #include <linux/sizes.h> +#include <linux/time.h> #include <zynqmp_firmware.h> #include "cadence_qspi.h" #include <dt-bindings/power/xlnx-versal-power.h> -#define NSEC_PER_SEC 1000000000L - #define CQSPI_STIG_READ 0 #define CQSPI_STIG_WRITE 1 #define CQSPI_READ 2 diff --git a/drivers/spi/fsl_dspi.c b/drivers/spi/fsl_dspi.c index f8ec268812c..89907cbbb02 100644 --- a/drivers/spi/fsl_dspi.c +++ b/drivers/spi/fsl_dspi.c @@ -27,9 +27,7 @@ #include <linux/bitops.h> #include <linux/delay.h> #include <linux/printk.h> - -/* linux/include/time.h */ -#define NSEC_PER_SEC 1000000000L +#include <linux/time.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/drivers/spi/meson_spifc_a1.c b/drivers/spi/meson_spifc_a1.c index 099c4c037dd..418d4d5e101 100644 --- a/drivers/spi/meson_spifc_a1.c +++ b/drivers/spi/meson_spifc_a1.c @@ -16,6 +16,7 @@ #include <spi-mem.h> #include <asm/io.h> #include <linux/log2.h> +#include <linux/time.h> #include <linux/iopoll.h> #include <linux/bitfield.h> @@ -117,7 +118,7 @@ static int amlogic_spifc_a1_request(struct amlogic_spifc_a1 *spifc, bool read) return readl_poll_timeout(spifc->base + SPIFC_A1_USER_CTRL0_REG, val, (val & mask) == mask, - 200 * 1000); + 200 * USEC_PER_MSEC); } static void amlogic_spifc_a1_drain_buffer(struct amlogic_spifc_a1 *spifc, diff --git a/drivers/spi/spi-mem-nodm.c b/drivers/spi/spi-mem-nodm.c index 6ee841358b3..6d9ab61769a 100644 --- a/drivers/spi/spi-mem-nodm.c +++ b/drivers/spi/spi-mem-nodm.c @@ -3,6 +3,7 @@ * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/ */ +#include <errno.h> #include <log.h> #include <malloc.h> #include <spi.h> diff --git a/drivers/sysreset/poweroff_gpio.c b/drivers/sysreset/poweroff_gpio.c index a5c24fd85bc..ad04e4b1a85 100644 --- a/drivers/sysreset/poweroff_gpio.c +++ b/drivers/sysreset/poweroff_gpio.c @@ -33,7 +33,7 @@ static int poweroff_gpio_request(struct udevice *dev, enum sysreset_t type) int r; if (type != SYSRESET_POWER_OFF) - return -ENOSYS; + return -EPROTONOSUPPORT; debug("GPIO poweroff\n"); diff --git a/drivers/sysreset/sysreset_psci.c b/drivers/sysreset/sysreset_psci.c index a8a41528a84..aa09d0b8827 100644 --- a/drivers/sysreset/sysreset_psci.c +++ b/drivers/sysreset/sysreset_psci.c @@ -25,7 +25,7 @@ static int psci_sysreset_request(struct udevice *dev, enum sysreset_t type) psci_sys_poweroff(); break; default: - return -ENOSYS; + return -EPROTONOSUPPORT; } return -EINPROGRESS; diff --git a/drivers/sysreset/sysreset_sandbox.c b/drivers/sysreset/sysreset_sandbox.c index f485a135299..c12eda81d03 100644 --- a/drivers/sysreset/sysreset_sandbox.c +++ b/drivers/sysreset/sysreset_sandbox.c @@ -21,7 +21,7 @@ static int sandbox_warm_sysreset_request(struct udevice *dev, state->last_sysreset = type; break; default: - return -ENOSYS; + return -EPROTONOSUPPORT; } if (!state->sysreset_allowed[type]) return -EACCES; @@ -70,7 +70,7 @@ static int sandbox_sysreset_request(struct udevice *dev, enum sysreset_t type) return -EACCES; sandbox_exit(); default: - return -ENOSYS; + return -EPROTONOSUPPORT; } if (!state->sysreset_allowed[type]) return -EACCES; diff --git a/drivers/sysreset/sysreset_watchdog.c b/drivers/sysreset/sysreset_watchdog.c index ceada2e47b5..6db5aa75b54 100644 --- a/drivers/sysreset/sysreset_watchdog.c +++ b/drivers/sysreset/sysreset_watchdog.c @@ -29,7 +29,7 @@ static int wdt_reboot_request(struct udevice *dev, enum sysreset_t type) return ret; break; default: - return -ENOSYS; + return -EPROTONOSUPPORT; } return -EINPROGRESS; diff --git a/drivers/sysreset/sysreset_x86.c b/drivers/sysreset/sysreset_x86.c index 4936fdb76c7..dc772b5ff9e 100644 --- a/drivers/sysreset/sysreset_x86.c +++ b/drivers/sysreset/sysreset_x86.c @@ -87,7 +87,7 @@ static int x86_sysreset_request(struct udevice *dev, enum sysreset_t type) return ret; return -EINPROGRESS; default: - return -ENOSYS; + return -EPROTONOSUPPORT; } outb(value, IO_PORT_RESET); diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig index 0e0cc58e3d6..ee021c7d549 100644 --- a/drivers/ufs/Kconfig +++ b/drivers/ufs/Kconfig @@ -2,7 +2,7 @@ menu "UFS Host Controller Support" config UFS bool "Support UFS controllers" - depends on DM_SCSI + depends on SCSI select CHARSET help This selects support for Universal Flash Subsystem (UFS). diff --git a/drivers/ufs/cdns-platform.c b/drivers/ufs/cdns-platform.c index 9202b53989d..d1f346937c5 100644 --- a/drivers/ufs/cdns-platform.c +++ b/drivers/ufs/cdns-platform.c @@ -13,11 +13,10 @@ #include <dm/device_compat.h> #include <linux/bitops.h> #include <linux/err.h> +#include <linux/time.h> #include "ufs.h" -#define USEC_PER_SEC 1000000L - #define CDNS_UFS_REG_HCLKDIV 0xFC #define CDNS_UFS_REG_PHY_XCFGD1 0x113C diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 3aec8b0d941..4b4fcd8a22e 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -31,6 +31,7 @@ #include <linux/usb/gadget.h> #include <linux/bitfield.h> #include <linux/math64.h> +#include <linux/time.h> #include "core.h" #include "gadget.h" @@ -38,8 +39,6 @@ #include "linux-compat.h" -#define NSEC_PER_SEC 1000000000L - static LIST_HEAD(dwc3_list); /* -------------------------------------------------------------------------- */ diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c index ee9384fb37e..ca2760c00d0 100644 --- a/drivers/usb/gadget/f_sdp.c +++ b/drivers/usb/gadget/f_sdp.c @@ -744,7 +744,7 @@ static ulong sdp_load_read(struct spl_load_info *load, ulong sector, { debug("%s: sector %lx, count %lx, buf %lx\n", __func__, sector, count, (ulong)buf); - memcpy(buf, (void *)(load->dev + sector), count); + memcpy(buf, (void *)(load->priv + sector), count); return count; } @@ -844,8 +844,8 @@ static int sdp_handle_in_ep(struct spl_image_info *spl_image, struct spl_load_info load; debug("Found FIT\n"); - load.dev = header; - load.bl_len = 1; + load.priv = header; + spl_set_bl_len(&load, 1); load.read = sdp_load_read; spl_load_simple_fit(spl_image, &load, 0, header); @@ -857,8 +857,8 @@ static int sdp_handle_in_ep(struct spl_image_info *spl_image, valid_container_hdr((void *)header)) { struct spl_load_info load; - load.dev = header; - load.bl_len = 1; + load.priv = header; + spl_set_bl_len(&load, 1); load.read = sdp_load_read; spl_load_imx_container(spl_image, &load, 0); return SDP_EXIT; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index ab927641bb7..6f319ba0d54 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -180,7 +180,6 @@ config CONSOLE_ROTATION config CONSOLE_TRUETYPE bool "Support a console that uses TrueType fonts" - select CMD_SELECT_FONT help TrueTrype fonts can provide outline-drawing capability rather than needing to provide a bitmap for each font and size that is needed. diff --git a/drivers/video/dw_mipi_dsi.c b/drivers/video/dw_mipi_dsi.c index 22fef7e8825..a7e0784596a 100644 --- a/drivers/video/dw_mipi_dsi.c +++ b/drivers/video/dw_mipi_dsi.c @@ -22,6 +22,7 @@ #include <linux/bitops.h> #include <linux/delay.h> #include <linux/iopoll.h> +#include <linux/time.h> #include <video_bridge.h> #define HWVER_131 0x31333100 /* IP version 1.31 */ @@ -214,8 +215,6 @@ #define PHY_STATUS_TIMEOUT_US 10000 #define CMD_PKT_STATUS_TIMEOUT_US 20000 -#define MSEC_PER_SEC 1000 - struct dw_mipi_dsi { struct mipi_dsi_host dsi_host; struct mipi_dsi_device *device; diff --git a/drivers/video/rockchip/dw_mipi_dsi_rockchip.c b/drivers/video/rockchip/dw_mipi_dsi_rockchip.c index 1a5ab781e3f..5e75b6ec68c 100644 --- a/drivers/video/rockchip/dw_mipi_dsi_rockchip.c +++ b/drivers/video/rockchip/dw_mipi_dsi_rockchip.c @@ -30,12 +30,11 @@ #include <asm/io.h> #include <dm/device-internal.h> #include <linux/bitops.h> +#include <linux/time.h> #include <asm/arch-rockchip/clock.h> #include <asm/arch-rockchip/hardware.h> -#define USEC_PER_SEC 1000000L - /* * DSI wrapper registers & bit definitions * Note: registers are named as in the Reference Manual diff --git a/drivers/video/tegra20/tegra-dsi.c b/drivers/video/tegra20/tegra-dsi.c index b4cf4fad5eb..a48f9c85d0f 100644 --- a/drivers/video/tegra20/tegra-dsi.c +++ b/drivers/video/tegra20/tegra-dsi.c @@ -14,6 +14,7 @@ #include <panel.h> #include <linux/delay.h> #include <linux/err.h> +#include <linux/time.h> #include <power/regulator.h> #include <asm/gpio.h> @@ -24,9 +25,6 @@ #include "mipi-phy.h" -#define USEC_PER_SEC 1000000L -#define NSEC_PER_SEC 1000000000L - struct tegra_dsi_priv { struct mipi_dsi_host host; struct mipi_dsi_device device; diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig index 852f6735b60..1de68867d52 100644 --- a/drivers/virtio/Kconfig +++ b/drivers/virtio/Kconfig @@ -56,7 +56,7 @@ config VIRTIO_SANDBOX config VIRTIO_NET bool "virtio net driver" - depends on VIRTIO + depends on VIRTIO && NETDEVICES help This is the virtual net driver for virtio. It can be used with QEMU based targets. diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c index b40a1d29caa..8eeac935760 100644 --- a/drivers/watchdog/sunxi_wdt.c +++ b/drivers/watchdog/sunxi_wdt.c @@ -9,8 +9,7 @@ #include <wdt.h> #include <asm/io.h> #include <linux/delay.h> - -#define MSEC_PER_SEC 1000 +#include <linux/time.h> #define WDT_MAX_TIMEOUT 16 #define WDT_TIMEOUT_MASK 0xf diff --git a/env/common.c b/env/common.c index eb1a9137953..656748c1f5b 100644 --- a/env/common.c +++ b/env/common.c @@ -37,11 +37,116 @@ struct hsearch_data env_htab = { }; /* - * This env_set() function is defined in cmd/nvedit.c, since it calls - * _do_env_set(), whis is a static function in that file. - * - * int env_set(const char *varname, const char *varvalue); + * This variable is incremented each time we set an environment variable so we + * can be check via env_get_id() to see if the environment has changed or not. + * This makes it possible to reread an environment variable only if the + * environment was changed, typically used by networking code. */ +static int env_id = 1; + +int env_get_id(void) +{ + return env_id; +} + +void env_inc_id(void) +{ + env_id++; +} + +int env_do_env_set(int flag, int argc, char *const argv[], int env_flag) +{ + int i, len; + char *name, *value, *s; + struct env_entry e, *ep; + + debug("Initial value for argc=%d\n", argc); + +#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_CMD_NVEDIT_EFI) + if (argc > 1 && argv[1][0] == '-' && argv[1][1] == 'e') + return do_env_set_efi(NULL, flag, --argc, ++argv); +#endif + + while (argc > 1 && **(argv + 1) == '-') { + char *arg = *++argv; + + --argc; + while (*++arg) { + switch (*arg) { + case 'f': /* force */ + env_flag |= H_FORCE; + break; + default: + return CMD_RET_USAGE; + } + } + } + debug("Final value for argc=%d\n", argc); + name = argv[1]; + + if (strchr(name, '=')) { + printf("## Error: illegal character '='" + "in variable name \"%s\"\n", name); + return 1; + } + + env_inc_id(); + + /* Delete only ? */ + if (argc < 3 || argv[2] == NULL) { + int rc = hdelete_r(name, &env_htab, env_flag); + + /* If the variable didn't exist, don't report an error */ + return rc && rc != -ENOENT ? 1 : 0; + } + + /* + * Insert / replace new value + */ + for (i = 2, len = 0; i < argc; ++i) + len += strlen(argv[i]) + 1; + + value = malloc(len); + if (value == NULL) { + printf("## Can't malloc %d bytes\n", len); + return 1; + } + for (i = 2, s = value; i < argc; ++i) { + char *v = argv[i]; + + while ((*s++ = *v++) != '\0') + ; + *(s - 1) = ' '; + } + if (s != value) + *--s = '\0'; + + e.key = name; + e.data = value; + hsearch_r(e, ENV_ENTER, &ep, &env_htab, env_flag); + free(value); + if (!ep) { + printf("## Error inserting \"%s\" variable, errno=%d\n", + name, errno); + return 1; + } + + return 0; +} + +int env_set(const char *varname, const char *varvalue) +{ + const char * const argv[4] = { "setenv", varname, varvalue, NULL }; + + /* before import into hashtable */ + if (!(gd->flags & GD_FLG_ENV_READY)) + return 1; + + if (varvalue == NULL || varvalue[0] == '\0') + return env_do_env_set(0, 2, (char * const *)argv, H_PROGRAMMATIC); + else + return env_do_env_set(0, 3, (char * const *)argv, H_PROGRAMMATIC); +} /** * Set an environment variable to an integer value diff --git a/env/ext4.c b/env/ext4.c index 47e05a48919..da26705b8da 100644 --- a/env/ext4.c +++ b/env/ext4.c @@ -77,7 +77,7 @@ static int env_ext4_save_buffer(env_t *env_new) dev = dev_desc->devnum; ext4fs_set_blk_dev(dev_desc, &info); - if (!ext4fs_mount(info.size)) { + if (!ext4fs_mount()) { printf("\n** Unable to use %s %s for saveenv **\n", ifname, dev_and_part); return 1; @@ -160,7 +160,7 @@ static int env_ext4_load(void) dev = dev_desc->devnum; ext4fs_set_blk_dev(dev_desc, &info); - if (!ext4fs_mount(info.size)) { + if (!ext4fs_mount()) { printf("\n** Unable to use %s %s for loading the env **\n", ifname, dev_and_part); goto err_env_relocate; diff --git a/fs/btrfs/btrfs.c b/fs/btrfs/btrfs.c index 4cdbbbe3d06..1149a3b2007 100644 --- a/fs/btrfs/btrfs.c +++ b/fs/btrfs/btrfs.c @@ -228,7 +228,7 @@ int btrfs_read(const char *file, void *buf, loff_t offset, loff_t len, { struct btrfs_fs_info *fs_info = current_fs_info; struct btrfs_root *root; - loff_t real_size = 0; + loff_t real_size; u64 ino; u8 type; int ret; @@ -246,16 +246,13 @@ int btrfs_read(const char *file, void *buf, loff_t offset, loff_t len, return -EINVAL; } - if (!len) { - ret = btrfs_size(file, &real_size); - if (ret < 0) { - error("Failed to get inode size: %s", file); - return ret; - } - len = real_size; + ret = btrfs_size(file, &real_size); + if (ret < 0) { + error("Failed to get inode size: %s", file); + return ret; } - if (len > real_size - offset) + if (!len || len > real_size - offset) len = real_size - offset; ret = btrfs_file_read(root, ino, offset, len, buf); diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c index f50de7c089e..ea9b92298ba 100644 --- a/fs/ext4/ext4_common.c +++ b/fs/ext4/ext4_common.c @@ -2368,7 +2368,7 @@ fail: return -1; } -int ext4fs_mount(unsigned part_length) +int ext4fs_mount(void) { struct ext2_data *data; int status; diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c index 4c89152ce4a..3b12ec54fa2 100644 --- a/fs/ext4/ext4fs.c +++ b/fs/ext4/ext4fs.c @@ -233,7 +233,7 @@ int ext4fs_probe(struct blk_desc *fs_dev_desc, { ext4fs_set_blk_dev(fs_dev_desc, fs_partition); - if (!ext4fs_mount(fs_partition->size)) { + if (!ext4fs_mount()) { ext4fs_close(); return -1; } diff --git a/fs/squashfs/sqfs_decompressor.c b/fs/squashfs/sqfs_decompressor.c index 6b3e01cdad7..cfd1153fd74 100644 --- a/fs/squashfs/sqfs_decompressor.c +++ b/fs/squashfs/sqfs_decompressor.c @@ -18,6 +18,10 @@ #include <u-boot/zlib.h> #endif +#if IS_ENABLED(CONFIG_LZ4) +#include <u-boot/lz4.h> +#endif + #if IS_ENABLED(CONFIG_ZSTD) #include <linux/zstd.h> #endif @@ -38,6 +42,10 @@ int sqfs_decompressor_init(struct squashfs_ctxt *ctxt) case SQFS_COMP_ZLIB: break; #endif +#if IS_ENABLED(CONFIG_LZ4) + case SQFS_COMP_LZ4: + break; +#endif #if IS_ENABLED(CONFIG_ZSTD) case SQFS_COMP_ZSTD: ctxt->zstd_workspace = malloc(zstd_dctx_workspace_bound()); @@ -66,6 +74,10 @@ void sqfs_decompressor_cleanup(struct squashfs_ctxt *ctxt) case SQFS_COMP_ZLIB: break; #endif +#if IS_ENABLED(CONFIG_LZ4) + case SQFS_COMP_LZ4: + break; +#endif #if IS_ENABLED(CONFIG_ZSTD) case SQFS_COMP_ZSTD: free(ctxt->zstd_workspace); @@ -139,6 +151,17 @@ int sqfs_decompress(struct squashfs_ctxt *ctxt, void *dest, break; #endif +#if IS_ENABLED(CONFIG_LZ4) + case SQFS_COMP_LZ4: + ret = LZ4_decompress_safe(source, dest, src_len, *dest_len); + if (ret < 0) { + printf("LZ4 decompression failed.\n"); + return -EINVAL; + } + + ret = 0; + break; +#endif #if IS_ENABLED(CONFIG_ZSTD) case SQFS_COMP_ZSTD: ret = sqfs_zstd_decompress(ctxt, dest, *dest_len, source, src_len); diff --git a/fs/squashfs/sqfs_decompressor.h b/fs/squashfs/sqfs_decompressor.h index 892cfb69744..c48b74fdf50 100644 --- a/fs/squashfs/sqfs_decompressor.h +++ b/fs/squashfs/sqfs_decompressor.h @@ -18,41 +18,6 @@ #define SQFS_COMP_LZ4 5 #define SQFS_COMP_ZSTD 6 -/* LZMA does not support any compression options */ - -struct squashfs_gzip_opts { - u32 compression_level; - u16 window_size; - u16 strategies; -}; - -struct squashfs_xz_opts { - u32 dictionary_size; - u32 executable_filters; -}; - -struct squashfs_lz4_opts { - u32 version; - u32 flags; -}; - -struct squashfs_zstd_opts { - u32 compression_level; -}; - -struct squashfs_lzo_opts { - u32 algorithm; - u32 level; -}; - -union squashfs_compression_opts { - struct squashfs_gzip_opts *gzip; - struct squashfs_xz_opts *xz; - struct squashfs_lz4_opts *lz4; - struct squashfs_zstd_opts *zstd; - struct squashfs_lzo_opts *lzo; -}; - int sqfs_decompress(struct squashfs_ctxt *ctxt, void *dest, unsigned long *dest_len, void *source, u32 src_len); int sqfs_decompressor_init(struct squashfs_ctxt *ctxt); diff --git a/fs/squashfs/sqfs_filesystem.h b/fs/squashfs/sqfs_filesystem.h index 5440b6c0e05..be56498a5e3 100644 --- a/fs/squashfs/sqfs_filesystem.h +++ b/fs/squashfs/sqfs_filesystem.h @@ -13,7 +13,6 @@ #include <part.h> #include <stdint.h> -#define SQFS_UNCOMPRESSED_DATA 0x0002 #define SQFS_MAGIC_NUMBER 0x73717368 /* The three first members of squashfs_dir_index make a total of 12 bytes */ #define SQFS_DIR_INDEX_BASE_LENGTH 12 @@ -23,7 +22,6 @@ #define SQFS_MAX_ENTRIES 512 /* Metadata blocks start by a 2-byte length header */ #define SQFS_HEADER_SIZE 2 -#define SQFS_LREG_INODE_MIN_SIZE 56 #define SQFS_DIR_HEADER_SIZE 12 #define SQFS_MISC_ENTRY_TYPE -1 #define SQFS_EMPTY_FILE_SIZE 3 diff --git a/fs/squashfs/sqfs_utils.h b/fs/squashfs/sqfs_utils.h index 1260abe22be..41f13e8a9ec 100644 --- a/fs/squashfs/sqfs_utils.h +++ b/fs/squashfs/sqfs_utils.h @@ -15,11 +15,8 @@ #define SQFS_FRAGMENT_INDEX_OFFSET(A) ((A) % SQFS_MAX_ENTRIES) #define SQFS_FRAGMENT_INDEX(A) ((A) / SQFS_MAX_ENTRIES) #define SQFS_BLOCK_SIZE(A) ((A) & GENMASK(23, 0)) -#define SQFS_CHECK_FLAG(flag, bit) (((flag) >> (bit)) & 1) /* Useful for both fragment and data blocks */ #define SQFS_COMPRESSED_BLOCK(A) (!((A) & BIT(24))) -/* SQFS_COMPRESSED_DATA strictly used with super block's 'flags' member */ -#define SQFS_COMPRESSED_DATA(A) (!((A) & 0x0002)) #define SQFS_IS_FRAGMENTED(A) ((A) != 0xFFFFFFFF) /* * These two macros work as getters for a metada block header, retrieving the @@ -28,22 +25,4 @@ #define SQFS_COMPRESSED_METADATA(A) (!((A) & BIT(15))) #define SQFS_METADATA_SIZE(A) ((A) & GENMASK(14, 0)) -struct squashfs_super_block_flags { - /* check: unused - * uncompressed_ids: not supported - */ - bool uncompressed_inodes; - bool uncompressed_data; - bool check; - bool uncompressed_frags; - bool no_frags; - bool always_frags; - bool duplicates; - bool exportable; - bool uncompressed_xattrs; - bool no_xattrs; - bool compressor_options; - bool uncompressed_ids; -}; - #endif /* SQFS_UTILS_H */ diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 67b13c83b56..b4e761c3668 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -68,7 +68,6 @@ struct page { void iput(struct inode *inode); /* linux/include/time.h */ -#define NSEC_PER_SEC 1000000000L #define get_seconds() 0 #define CURRENT_TIME_SEC ((struct timespec) { get_seconds(), 0 }) diff --git a/include/MCD_dma.h b/include/MCD_dma.h deleted file mode 100644 index 2f16c89044e..00000000000 --- a/include/MCD_dma.h +++ /dev/null @@ -1,369 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - */ - -#ifndef _MCD_API_H -#define _MCD_API_H - -/* Turn Execution Unit tasks ON (#define) or OFF (#undef) */ -#undef MCD_INCLUDE_EU - -/* Number of DMA channels */ -#define NCHANNELS 16 - -/* Total number of variants */ -#ifdef MCD_INCLUDE_EU -#define NUMOFVARIANTS 6 -#else -#define NUMOFVARIANTS 4 -#endif - -/* Define sizes of the various tables */ -#define TASK_TABLE_SIZE (NCHANNELS*32) -#define VAR_TAB_SIZE (128) -#define CONTEXT_SAVE_SIZE (128) -#define FUNCDESC_TAB_SIZE (256) - -#ifdef MCD_INCLUDE_EU -#define FUNCDESC_TAB_NUM 16 -#else -#define FUNCDESC_TAB_NUM 1 -#endif - -#ifndef DEFINESONLY - -/* Portability typedefs */ -#if 1 -#include "common.h" -#else -#ifndef s32 -typedef int s32; -#endif -#ifndef u32 -typedef unsigned int u32; -#endif -#ifndef s16 -typedef short s16; -#endif -#ifndef u16 -typedef unsigned short u16; -#endif -#ifndef s8 -typedef char s8; -#endif -#ifndef u8 -typedef unsigned char u8; -#endif -#endif - -/* - * These structures represent the internal registers of the - * multi-channel DMA - */ -struct dmaRegs_s { - u32 taskbar; /* task table base address */ - u32 currPtr; - u32 endPtr; - u32 varTablePtr; - u16 dma_rsvd0; - u16 ptdControl; /* ptd control */ - u32 intPending; /* interrupt pending */ - u32 intMask; /* interrupt mask */ - u16 taskControl[16]; /* task control */ - u8 priority[32]; /* priority */ - u32 initiatorMux; /* initiator mux control */ - u32 taskSize0; /* task size control 0. */ - u32 taskSize1; /* task size control 1. */ - u32 dma_rsvd1; /* reserved */ - u32 dma_rsvd2; /* reserved */ - u32 debugComp1; /* debug comparator 1 */ - u32 debugComp2; /* debug comparator 2 */ - u32 debugControl; /* debug control */ - u32 debugStatus; /* debug status */ - u32 ptdDebug; /* priority task decode debug */ - u32 dma_rsvd3[31]; /* reserved */ -}; -typedef volatile struct dmaRegs_s dmaRegs; - -#endif - -/* PTD contrl reg bits */ -#define PTD_CTL_TSK_PRI 0x8000 -#define PTD_CTL_COMM_PREFETCH 0x0001 - -/* Task Control reg bits and field masks */ -#define TASK_CTL_EN 0x8000 -#define TASK_CTL_VALID 0x4000 -#define TASK_CTL_ALWAYS 0x2000 -#define TASK_CTL_INIT_MASK 0x1f00 -#define TASK_CTL_ASTRT 0x0080 -#define TASK_CTL_HIPRITSKEN 0x0040 -#define TASK_CTL_HLDINITNUM 0x0020 -#define TASK_CTL_ASTSKNUM_MASK 0x000f - -/* Priority reg bits and field masks */ -#define PRIORITY_HLD 0x80 -#define PRIORITY_PRI_MASK 0x07 - -/* Debug Control reg bits and field masks */ -#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000 -#define DBG_CTL_AUTO_ARM 0x00008000 -#define DBG_CTL_BREAK 0x00004000 -#define DBG_CTL_COMP1_TYP_MASK 0x00003800 -#define DBG_CTL_COMP2_TYP_MASK 0x00000070 -#define DBG_CTL_EXT_BREAK 0x00000004 -#define DBG_CTL_INT_BREAK 0x00000002 - -/* - * PTD Debug reg selector addresses - * This reg must be written with a value to show the contents of - * one of the desired internal register. - */ -#define PTD_DBG_REQ 0x00 /* shows the state of 31 initiators */ -#define PTD_DBG_TSK_VLD_INIT 0x01 /* shows which 16 tasks are valid and - have initiators asserted */ - -/* General return values */ -#define MCD_OK 0 -#define MCD_ERROR -1 -#define MCD_TABLE_UNALIGNED -2 -#define MCD_CHANNEL_INVALID -3 - -/* MCD_initDma input flags */ -#define MCD_RELOC_TASKS 0x00000001 -#define MCD_NO_RELOC_TASKS 0x00000000 -#define MCD_COMM_PREFETCH_EN 0x00000002 /* MCF547x/548x ONLY */ - -/* - * MCD_dmaStatus Status Values for each channel: - * MCD_NO_DMA - No DMA has been requested since reset - * MCD_IDLE - DMA active, but the initiator is currently inactive - * MCD_RUNNING - DMA active, and the initiator is currently active - * MCD_PAUSED - DMA active but it is currently paused - * MCD_HALTED - the most recent DMA has been killed with MCD_killTask() - * MCD_DONE - the most recent DMA has completed - */ -#define MCD_NO_DMA 1 -#define MCD_IDLE 2 -#define MCD_RUNNING 3 -#define MCD_PAUSED 4 -#define MCD_HALTED 5 -#define MCD_DONE 6 - -/* MCD_startDma parameter defines */ - -/* Constants for the funcDesc parameter */ -/* - * MCD_NO_BYTE_SWAP - to disable byte swapping - * MCD_BYTE_REVERSE - to reverse the bytes of each u32 of the DMAed data - * MCD_U16_REVERSE - to reverse the 16-bit halves of each 32-bit data - * value being DMAed - * MCD_U16_BYTE_REVERSE - to reverse the byte halves of each 16-bit half of - * each 32-bit data value DMAed - * MCD_NO_BIT_REV - do not reverse the bits of each byte DMAed - * MCD_BIT_REV - reverse the bits of each byte DMAed - * MCD_CRC16 - to perform CRC-16 on DMAed data - * MCD_CRCCCITT - to perform CRC-CCITT on DMAed data - * MCD_CRC32 - to perform CRC-32 on DMAed data - * MCD_CSUMINET - to perform internet checksums on DMAed data - * MCD_NO_CSUM - to perform no checksumming - */ -#define MCD_NO_BYTE_SWAP 0x00045670 -#define MCD_BYTE_REVERSE 0x00076540 -#define MCD_U16_REVERSE 0x00067450 -#define MCD_U16_BYTE_REVERSE 0x00054760 -#define MCD_NO_BIT_REV 0x00000000 -#define MCD_BIT_REV 0x00088880 -/* CRCing: */ -#define MCD_CRC16 0xc0100000 -#define MCD_CRCCCITT 0xc0200000 -#define MCD_CRC32 0xc0300000 -#define MCD_CSUMINET 0xc0400000 -#define MCD_NO_CSUM 0xa0000000 - -#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | \ - MCD_NO_CSUM) -#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM) - -/* Constants for the flags parameter */ -#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */ -#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */ -#define MCD_TT_FLAGS_SP 0x00000004 /* MCF547x/548x ONLY */ -#define MCD_TT_FLAGS_MASK 0x000000ff -#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW) - -#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */ -#define MCD_CHAIN_DMA /* TBD */ -#define MCD_EU_DMA /* TBD */ -#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */ -#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */ - -/* these flags are valid for MCD_startDma and the chained buffer descriptors */ -/* - * MCD_BUF_READY - indicates that this buf is now under the DMA's ctrl - * MCD_WRAP - to tell the FEC Dmas to wrap to the first BD - * MCD_INTERRUPT - to generate an interrupt after completion of the DMA - * MCD_END_FRAME - tell the DMA to end the frame when transferring - * last byte of data in buffer - * MCD_CRC_RESTART - to empty out the accumulated checksum prior to - * performing the DMA - */ -#define MCD_BUF_READY 0x80000000 -#define MCD_WRAP 0x20000000 -#define MCD_INTERRUPT 0x10000000 -#define MCD_END_FRAME 0x08000000 -#define MCD_CRC_RESTART 0x40000000 - -/* Defines for the FEC buffer descriptor control/status word*/ -#define MCD_FEC_BUF_READY 0x8000 -#define MCD_FEC_WRAP 0x2000 -#define MCD_FEC_INTERRUPT 0x1000 -#define MCD_FEC_END_FRAME 0x0800 - -/* Defines for general intuitiveness */ - -#define MCD_TRUE 1 -#define MCD_FALSE 0 - -/* Three different cases for destination and source. */ -#define MINUS1 -1 -#define ZERO 0 -#define PLUS1 1 - -#ifndef DEFINESONLY - -/* Task Table Entry struct*/ -typedef struct { - u32 TDTstart; /* task descriptor table start */ - u32 TDTend; /* task descriptor table end */ - u32 varTab; /* variable table start */ - u32 FDTandFlags; /* function descriptor table start & flags */ - volatile u32 descAddrAndStatus; - volatile u32 modifiedVarTab; - u32 contextSaveSpace; /* context save space start */ - u32 literalBases; -} TaskTableEntry; - -/* Chained buffer descriptor: - * flags - flags describing the DMA - * csumResult - checksum performed since last checksum reset - * srcAddr - the address to move data from - * destAddr - the address to move data to - * lastDestAddr - the last address written to - * dmaSize - the no of bytes to xfer independent of the xfer sz - * next - next buffer descriptor in chain - * info - private info about this descriptor; DMA does not affect it - */ -typedef volatile struct MCD_bufDesc_struct MCD_bufDesc; -struct MCD_bufDesc_struct { - u32 flags; - u32 csumResult; - s8 *srcAddr; - s8 *destAddr; - s8 *lastDestAddr; - u32 dmaSize; - MCD_bufDesc *next; - u32 info; -}; - -/* Progress Query struct: - * lastSrcAddr - the most-recent or last, post-increment source address - * lastDestAddr - the most-recent or last, post-increment destination address - * dmaSize - the amount of data transferred for the current buffer - * currBufDesc - pointer to the current buffer descriptor being DMAed - */ - -typedef volatile struct MCD_XferProg_struct { - s8 *lastSrcAddr; - s8 *lastDestAddr; - u32 dmaSize; - MCD_bufDesc *currBufDesc; -} MCD_XferProg; - -/* FEC buffer descriptor */ -typedef volatile struct MCD_bufDescFec_struct { - u16 statCtrl; - u16 length; - u32 dataPointer; -} MCD_bufDescFec; - -/*************************************************************************/ -/* API function Prototypes - see MCD_dmaApi.c for further notes */ - -/* MCD_startDma starts a particular kind of DMA: - * srcAddr - the channel on which to run the DMA - * srcIncr - the address to move data from, or buffer-descriptor address - * destAddr - the amount to increment the source address per transfer - * destIncr - the address to move data to - * dmaSize - the amount to increment the destination address per transfer - * xferSize - the number bytes in of each data movement (1, 2, or 4) - * initiator - what device initiates the DMA - * priority - priority of the DMA - * flags - flags describing the DMA - * funcDesc - description of byte swapping, bit swapping, and CRC actions - */ -int MCD_startDma(int channel, s8 * srcAddr, s16 srcIncr, s8 * destAddr, - s16 destIncr, u32 dmaSize, u32 xferSize, u32 initiator, - int priority, u32 flags, u32 funcDesc); - -/* - * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA - * registers, relocating and creating the appropriate task structures, and - * setting up some global settings - */ -int MCD_initDma(dmaRegs * sDmaBarAddr, void *taskTableDest, u32 flags); - -/* MCD_dmaStatus() returns the status of the DMA on the requested channel. */ -int MCD_dmaStatus(int channel); - -/* MCD_XferProgrQuery() returns progress of DMA on requested channel */ -int MCD_XferProgrQuery(int channel, MCD_XferProg * progRep); - -/* - * MCD_killDma() halts the DMA on the requested channel, without any - * intention of resuming the DMA. - */ -int MCD_killDma(int channel); - -/* - * MCD_continDma() continues a DMA which as stopped due to encountering an - * unready buffer descriptor. - */ -int MCD_continDma(int channel); - -/* - * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is - * running on that channel). - */ -int MCD_pauseDma(int channel); - -/* - * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is - * running on that channel). - */ -int MCD_resumeDma(int channel); - -/* MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA */ -int MCD_csumQuery(int channel, u32 * csum); - -/* - * MCD_getCodeSize provides the packed size required by the microcoded task - * and structures. - */ -int MCD_getCodeSize(void); - -/* - * MCD_getVersion provides a pointer to a version string and returns a - * version number. - */ -int MCD_getVersion(char **longVersion); - -/* macro for setting a location in the variable table */ -#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value -/* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function, - so I'm avoiding surrounding it with "do {} while(0)" */ - -#endif /* DEFINESONLY */ - -#endif /* _MCD_API_H */ diff --git a/include/MCD_progCheck.h b/include/MCD_progCheck.h deleted file mode 100644 index 1ec8fbfbd28..00000000000 --- a/include/MCD_progCheck.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - */ - - /* This file is autogenerated. Do not change */ -#define CURRBD 4 -#define DCOUNT 6 -#define DESTPTR 5 -#define SRCPTR 7 diff --git a/include/MCD_tasksInit.h b/include/MCD_tasksInit.h deleted file mode 100644 index 9f582beb51a..00000000000 --- a/include/MCD_tasksInit.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - */ - -#ifndef MCD_TSK_INIT_H -#define MCD_TSK_INIT_H 1 - -/* - * Do not edit! - */ - -/* Task 0 */ -void MCD_startDmaChainNoEu(int *currBD, short srcIncr, short destIncr, - int xferSize, short xferSizeIncr, int *cSave, - volatile TaskTableEntry * taskTable, int channel); - -/* Task 1 */ -void MCD_startDmaSingleNoEu(char *srcAddr, short srcIncr, char *destAddr, - short destIncr, int dmaSize, short xferSizeIncr, - int flags, int *currBD, int *cSave, - volatile TaskTableEntry * taskTable, int channel); - -/* Task 2 */ -void MCD_startDmaChainEu(int *currBD, short srcIncr, short destIncr, - int xferSize, short xferSizeIncr, int *cSave, - volatile TaskTableEntry * taskTable, int channel); - -/* Task 3 */ -void MCD_startDmaSingleEu(char *srcAddr, short srcIncr, char *destAddr, - short destIncr, int dmaSize, short xferSizeIncr, - int flags, int *currBD, int *cSave, - volatile TaskTableEntry * taskTable, int channel); - -/* Task 4 */ -void MCD_startDmaENetRcv(char *bDBase, char *currBD, char *rcvFifoPtr, - volatile TaskTableEntry * taskTable, int channel); - -/* Task 5 */ -void MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr, - volatile TaskTableEntry * taskTable, int channel); - -#endif /* MCD_TSK_INIT_H */ diff --git a/include/ahci.h b/include/ahci.h index d7f951c3883..d4f0f3ce0e7 100644 --- a/include/ahci.h +++ b/include/ahci.h @@ -223,9 +223,6 @@ int sata_dm_port_status(struct udevice *dev, int port); */ int sata_scan(struct udevice *dev); -int ahci_init(void __iomem *base); -int ahci_reset(void __iomem *base); - /** * ahci_init_one_dm() - set up a single AHCI port * diff --git a/include/bcb.h b/include/bcb.h index 5edb17aa47d..1941d8c28b4 100644 --- a/include/bcb.h +++ b/include/bcb.h @@ -8,14 +8,69 @@ #ifndef __BCB_H__ #define __BCB_H__ +#include <part.h> + +enum bcb_field { + BCB_FIELD_COMMAND, + BCB_FIELD_STATUS, + BCB_FIELD_RECOVERY, + BCB_FIELD_STAGE +}; + #if IS_ENABLED(CONFIG_CMD_BCB) -int bcb_write_reboot_reason(int devnum, char *partp, const char *reasonp); + +int bcb_find_partition_and_load(const char *iface, + int devnum, char *partp); +int bcb_load(struct blk_desc *block_description, + struct disk_partition *disk_partition); +int bcb_set(enum bcb_field field, const char *value); + +/** + * bcb_get() - get the field value. + * @field: field to get + * @value_out: buffer to copy bcb field value to + * @value_size: buffer size to avoid overflow in case + * value_out is smaller then the field value + */ +int bcb_get(enum bcb_field field, char *value_out, size_t value_size); + +int bcb_store(void); +void bcb_reset(void); + #else + #include <linux/errno.h> -static inline int bcb_write_reboot_reason(int devnum, char *partp, const char *reasonp) + +static inline int bcb_load(struct blk_desc *block_description, + struct disk_partition *disk_partition) +{ + return -EOPNOTSUPP; +} + +static inline int bcb_find_partition_and_load(const char *iface, + int devnum, char *partp) +{ + return -EOPNOTSUPP; +} + +static inline int bcb_set(enum bcb_field field, const char *value) +{ + return -EOPNOTSUPP; +} + +static inline int bcb_get(enum bcb_field field, char *value_out) { return -EOPNOTSUPP; } + +static inline int bcb_store(void) +{ + return -EOPNOTSUPP; +} + +static inline void bcb_reset(void) +{ +} #endif #endif /* __BCB_H__ */ diff --git a/include/blkmap.h b/include/blkmap.h index af54583c7dd..30dc84a7da8 100644 --- a/include/blkmap.h +++ b/include/blkmap.h @@ -7,6 +7,23 @@ #ifndef _BLKMAP_H #define _BLKMAP_H +#include <dm/lists.h> + +/** + * struct blkmap - Block map + * + * Data associated with a blkmap. + * + * @label: Human readable name of this blkmap + * @blk: Underlying block device + * @slices: List of slices associated with this blkmap + */ +struct blkmap { + char *label; + struct udevice *blk; + struct list_head slices; +}; + /** * blkmap_map_linear() - Map region of other block device * @@ -74,4 +91,16 @@ int blkmap_create(const char *label, struct udevice **devp); */ int blkmap_destroy(struct udevice *dev); +/** + * blkmap_create_ramdisk() - Create new ramdisk with blkmap + * + * @label: Label of the new blkmap + * @image_addr: Target memory start address of this mapping + * @image_size: Target memory size of this mapping + * @devp: Updated with the address of the created blkmap device + * Returns: 0 on success, negative error code on failure + */ +int blkmap_create_ramdisk(const char *label, ulong image_addr, ulong image_size, + struct udevice **devp); + #endif /* _BLKMAP_H */ diff --git a/include/bootcount.h b/include/bootcount.h index bfa5d464276..bc06e17c9fb 100644 --- a/include/bootcount.h +++ b/include/bootcount.h @@ -6,7 +6,6 @@ #ifndef _BOOTCOUNT_H__ #define _BOOTCOUNT_H__ -#include <common.h> #include <asm/global_data.h> #include <asm/io.h> #include <asm/byteorder.h> diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 83ab94ec444..971a393817a 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -57,13 +57,6 @@ * MMC */ -/* SATA */ -#ifndef PCI_DEVICE_ID_FREESCALE_AHCI -#define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440 -#endif -#define CFG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ - PCI_DEVICE_ID_FREESCALE_AHCI} - /* SPI */ #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index ee4f885c534..0f591e3c4ab 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -49,11 +49,6 @@ CSOR_NOR_TRHZ_80) #endif -/* SATA */ -#define SCSI_VEND_ID 0x1b4b -#define SCSI_DEV_ID 0x9170 -#define CFG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} - /* Initial environment variables */ #ifndef SPL_NO_ENV #undef CFG_EXTRA_ENV_SETTINGS diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 60362b6a4d0..ef8fdc1912b 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -199,13 +199,6 @@ #endif #endif -/* SATA */ -#ifndef SPL_NO_SATA -#define SCSI_VEND_ID 0x1b4b -#define SCSI_DEV_ID 0x9170 -#define CFG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} -#endif - #include <asm/fsl_secure_boot.h> #endif /* __LS1043ARDB_H__ */ diff --git a/include/configs/poplar.h b/include/configs/poplar.h index 6e8adf91877..629b335f5d1 100644 --- a/include/configs/poplar.h +++ b/include/configs/poplar.h @@ -37,11 +37,11 @@ "env_mmc_blknum=0xf80\0" \ "env_mmc_nblks=0x80\0" \ "kernel_addr_r=0x30000000\0" \ - "pxefile_addr_r=0x32000000\0" \ - "scriptaddr=0x32000000\0" \ - "fdt_addr_r=0x32200000\0" \ + "pxefile_addr_r=0x33000000\0" \ + "scriptaddr=0x33000000\0" \ + "fdt_addr_r=0x33200000\0" \ "fdtfile=hisilicon/hi3798cv200-poplar.dtb\0" \ - "ramdisk_addr_r=0x32400000\0" \ + "ramdisk_addr_r=0x33400000\0" \ BOOTENV #endif /* _POPLAR_H_ */ diff --git a/include/configs/stm32mp25_common.h b/include/configs/stm32mp25_common.h new file mode 100644 index 00000000000..ec980eea856 --- /dev/null +++ b/include/configs/stm32mp25_common.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */ +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + * + * Configuration settings for the STM32MP25x CPU + */ + +#ifndef __CONFIG_STM32MP25_COMMMON_H +#define __CONFIG_STM32MP25_COMMMON_H +#include <linux/sizes.h> +#include <asm/arch/stm32.h> + +/* + * Configuration of the external SRAM memory used by U-Boot + */ +#define CFG_SYS_SDRAM_BASE STM32_DDR_BASE + +/* + * For booting Linux, use the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_SYS_BOOTMAPSZ SZ_256M + +#endif /* __CONFIG_STM32MP25_COMMMON_H */ diff --git a/include/dfu.h b/include/dfu.h index 07922224ef1..68b5ca46ce5 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -10,7 +10,6 @@ #ifndef __DFU_ENTITY_H_ #define __DFU_ENTITY_H_ -#include <common.h> #include <linux/list.h> #include <mmc.h> #include <spi_flash.h> diff --git a/include/display_options.h b/include/display_options.h index 85dacbc7590..66e59607737 100644 --- a/include/display_options.h +++ b/include/display_options.h @@ -9,6 +9,8 @@ #ifndef __DISPLAY_OPTIONS_H #define __DISPLAY_OPTIONS_H +#include <linux/types.h> + /** * print_size() - Print a size with a suffix * @@ -19,7 +21,6 @@ * @size: Size to print * @suffix String to print after the size */ -#include <display_options.h> void print_size(uint64_t size, const char *suffix); /** diff --git a/include/dt-bindings/pinctrl/stm32-pinfunc.h b/include/dt-bindings/pinctrl/stm32-pinfunc.h index e6fb8ada3f4..28ad0235086 100644 --- a/include/dt-bindings/pinctrl/stm32-pinfunc.h +++ b/include/dt-bindings/pinctrl/stm32-pinfunc.h @@ -37,6 +37,9 @@ #define STM32MP_PKG_AB 0x2 #define STM32MP_PKG_AC 0x4 #define STM32MP_PKG_AD 0x8 +#define STM32MP_PKG_AI 0x100 +#define STM32MP_PKG_AK 0x400 +#define STM32MP_PKG_AL 0x800 #endif /* _DT_BINDINGS_STM32_PINFUNC_H */ diff --git a/include/efi_api.h b/include/efi_api.h index 8f5ef5f680f..0e92cb8a7f6 100644 --- a/include/efi_api.h +++ b/include/efi_api.h @@ -192,7 +192,7 @@ struct efi_boot_services { struct efi_event *event, void *context), void *notify_context, - efi_guid_t *event_group, + const efi_guid_t *event_group, struct efi_event **event); }; @@ -404,6 +404,9 @@ struct efi_runtime_services { #define EFI_EVENT_GROUP_RESET_SYSTEM \ EFI_GUID(0x62da6a56, 0x13fb, 0x485a, 0xa8, 0xda, \ 0xa3, 0xdd, 0x79, 0x12, 0xcb, 0x6b) +#define EFI_EVENT_GROUP_RETURN_TO_EFIBOOTMGR \ + EFI_GUID(0xb4a40fe6, 0x9149, 0x4f29, 0x94, 0x47, \ + 0x49, 0x38, 0x7a, 0x7f, 0xab, 0x87) /* EFI Configuration Table and GUID definitions */ #define NULL_GUID \ diff --git a/include/efi_loader.h b/include/efi_loader.h index e24410505f4..664dae28f88 100644 --- a/include/efi_loader.h +++ b/include/efi_loader.h @@ -8,7 +8,6 @@ #ifndef _EFI_LOADER_H #define _EFI_LOADER_H 1 -#include <common.h> #include <blk.h> #include <event.h> #include <log.h> @@ -290,6 +289,8 @@ extern const efi_guid_t efi_guid_event_group_memory_map_change; extern const efi_guid_t efi_guid_event_group_ready_to_boot; /* event group ResetSystem() invoked (before ExitBootServices) */ extern const efi_guid_t efi_guid_event_group_reset_system; +/* event group return to efibootmgr */ +extern const efi_guid_t efi_guid_event_group_return_to_efibootmgr; /* GUID of the device tree table */ extern const efi_guid_t efi_guid_fdt; extern const efi_guid_t efi_guid_loaded_image; @@ -685,7 +686,7 @@ efi_status_t efi_create_event(uint32_t type, efi_uintn_t notify_tpl, void (EFIAPI *notify_function) ( struct efi_event *event, void *context), - void *notify_context, efi_guid_t *group, + void *notify_context, const efi_guid_t *group, struct efi_event **event); /* Call this to set a timer */ efi_status_t efi_set_timer(struct efi_event *event, enum efi_timer_delay type, diff --git a/include/efi_selftest.h b/include/efi_selftest.h index 7c69c3f3761..5bcebb36828 100644 --- a/include/efi_selftest.h +++ b/include/efi_selftest.h @@ -8,7 +8,6 @@ #ifndef _EFI_SELFTEST_H #define _EFI_SELFTEST_H -#include <common.h> #include <efi.h> #include <efi_api.h> #include <efi_loader.h> diff --git a/include/env.h b/include/env.h index 430c4fa94a4..9778e3e4f2c 100644 --- a/include/env.h +++ b/include/env.h @@ -73,6 +73,14 @@ enum env_redund_flags { int env_get_id(void); /** + * env_inc_id() - Increase the sequence number for the environment + * + * Increment the value that is used by env_get_id() to inform callers + * if the environment has changed since they last checked. + */ +void env_inc_id(void); + +/** * env_init() - Set up the pre-relocation environment * * This locates the environment or uses the default if nothing is available. diff --git a/include/env_internal.h b/include/env_internal.h index fcb464263f0..5c289d67f90 100644 --- a/include/env_internal.h +++ b/include/env_internal.h @@ -194,6 +194,18 @@ struct env_driver { extern struct hsearch_data env_htab; /** + * env_do_env_set() - Perform the actual setting of an environment variable + * + * Due to the number of places we may need to set an environmental variable + * from we have an exposed internal function that performs the real work and + * then call this from both the command line function as well as other + * locations. + * + * Return: 0 on success or 1 on failure + */ +int env_do_env_set(int flag, int argc, char *const argv[], int env_flag); + +/** * env_ext4_get_intf() - Provide the interface for env in EXT4 * * It is a weak function allowing board to overidde the default interface for diff --git a/include/ext4fs.h b/include/ext4fs.h index dd66d27f776..d96edfd0576 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -147,7 +147,7 @@ int ext4fs_create_link(const char *target, const char *fname); struct ext_filesystem *get_fs(void); int ext4fs_open(const char *filename, loff_t *len); int ext4fs_read(char *buf, loff_t offset, loff_t len, loff_t *actread); -int ext4fs_mount(unsigned part_length); +int ext4fs_mount(void); void ext4fs_close(void); void ext4fs_reinit_global(void); int ext4fs_ls(const char *dirname); diff --git a/include/fm_eth.h b/include/fm_eth.h index 8b133e703b4..f30110817c7 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -7,7 +7,6 @@ #ifndef __FM_ETH_H__ #define __FM_ETH_H__ -#include <common.h> #include <phy.h> #include <asm/types.h> diff --git a/include/fs.h b/include/fs.h index e341a0ed01b..ef540e7c23d 100644 --- a/include/fs.h +++ b/include/fs.h @@ -5,7 +5,6 @@ #ifndef _FS_H #define _FS_H -#include <common.h> #include <rtc.h> struct cmd_tbl; diff --git a/include/fsl-mc/fsl_mc.h b/include/fsl-mc/fsl_mc.h index 258738dfc8c..71907bc73c5 100644 --- a/include/fsl-mc/fsl_mc.h +++ b/include/fsl-mc/fsl_mc.h @@ -7,9 +7,10 @@ #ifndef __FSL_MC_H__ #define __FSL_MC_H__ -#include <common.h> #include <linux/bitops.h> +struct bd_info; + #define MC_CCSR_BASE_ADDR \ ((struct mc_ccsr_registers __iomem *)0x8340000) diff --git a/include/fsl_errata.h b/include/fsl_errata.h index 88f4268658a..44547645df8 100644 --- a/include/fsl_errata.h +++ b/include/fsl_errata.h @@ -6,7 +6,6 @@ #ifndef _FSL_ERRATA_H #define _FSL_ERRATA_H -#include <common.h> #if defined(CONFIG_PPC) #include <asm/processor.h> #elif defined(CONFIG_ARCH_LS1021A) diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h index de1e70a6d0b..f9a0a7017d4 100644 --- a/include/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -9,7 +9,6 @@ #ifdef CONFIG_FSL_IFC #include <config.h> -#include <common.h> #include <part.h> #ifdef CONFIG_ARM #include <asm/arch/soc.h> diff --git a/include/fsl_qe.h b/include/fsl_qe.h index 48accb8d891..309ca7ea6af 100644 --- a/include/fsl_qe.h +++ b/include/fsl_qe.h @@ -9,7 +9,6 @@ #ifndef __QE_H__ #define __QE_H__ -#include "common.h" #ifdef CONFIG_U_QE #include <linux/immap_qe.h> #endif diff --git a/include/fsl_sec.h b/include/fsl_sec.h index 9dad1d1ec47..8c5e59c5b1c 100644 --- a/include/fsl_sec.h +++ b/include/fsl_sec.h @@ -9,7 +9,6 @@ #ifndef __FSL_SEC_H #define __FSL_SEC_H -#include <common.h> #include <asm/io.h> #ifdef CONFIG_SYS_FSL_SEC_LE diff --git a/include/fsl_sec_mon.h b/include/fsl_sec_mon.h index 3092a0ea62a..248d5b6d421 100644 --- a/include/fsl_sec_mon.h +++ b/include/fsl_sec_mon.h @@ -8,7 +8,6 @@ #ifndef __FSL_SEC_MON_H #define __FSL_SEC_MON_H -#include <common.h> #include <asm/io.h> #ifdef CONFIG_SYS_FSL_SEC_MON_LE diff --git a/include/fsl_sfp.h b/include/fsl_sfp.h index e7674c1bff2..0dec69a7235 100644 --- a/include/fsl_sfp.h +++ b/include/fsl_sfp.h @@ -6,7 +6,6 @@ #ifndef _FSL_SFP_SNVS_ #define _FSL_SFP_SNVS_ -#include <common.h> #include <config.h> #include <asm/io.h> diff --git a/include/iotrace.h b/include/iotrace.h index 7ff2e8332b0..d5610426cc8 100644 --- a/include/iotrace.h +++ b/include/iotrace.h @@ -6,7 +6,6 @@ #ifndef __IOTRACE_H #define __IOTRACE_H -//#include <common.h> #include <linux/types.h> /* Support up to the machine word length for now */ diff --git a/include/k210/pll.h b/include/k210/pll.h index fd16a89cb20..175c47f6f23 100644 --- a/include/k210/pll.h +++ b/include/k210/pll.h @@ -16,9 +16,6 @@ struct k210_pll_config { #ifdef CONFIG_UNIT_TEST TEST_STATIC int k210_pll_calc_config(u32 rate, u32 rate_in, struct k210_pll_config *best); -#ifndef nop -#define nop() -#endif #endif #endif /* K210_PLL_H */ diff --git a/include/key_matrix.h b/include/key_matrix.h index e7420b9d795..17f5d12cdd9 100644 --- a/include/key_matrix.h +++ b/include/key_matrix.h @@ -8,7 +8,6 @@ #ifndef _KEY_MATRIX_H #define _KEY_MATRIX_H -#include <common.h> /* Information about a matrix keyboard */ struct key_matrix { diff --git a/include/libata.h b/include/libata.h index b03b29960df..a55e9315a73 100644 --- a/include/libata.h +++ b/include/libata.h @@ -10,7 +10,6 @@ #ifndef __LIBATA_H__ #define __LIBATA_H__ -#include <common.h> enum { /* various global constants */ diff --git a/include/linux/mii.h b/include/linux/mii.h index 49e29ac314a..70689bc53d7 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -9,6 +9,8 @@ #ifndef __LINUX_MII_H__ #define __LINUX_MII_H__ +#include <linux/types.h> + /* Generic MII registers. */ #define MII_BMCR 0x00 /* Basic mode control register */ #define MII_BMSR 0x01 /* Basic mode status register */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 09f52698877..7a66c7af749 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -552,8 +552,20 @@ unsigned mtd_mmap_capabilities(struct mtd_info *mtd); #ifdef __UBOOT__ /* drivers/mtd/mtdcore.h */ +#if CONFIG_IS_ENABLED(MTD) int add_mtd_device(struct mtd_info *mtd); int del_mtd_device(struct mtd_info *mtd); +#else +static inline int add_mtd_device(struct mtd_info *mtd) +{ + return -ENOSYS; +} + +static inline int del_mtd_device(struct mtd_info *mtd) +{ + return -ENOSYS; +} +#endif #ifdef CONFIG_MTD_PARTITIONS int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int); diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h index e8d6feb9705..6d68514e07a 100644 --- a/include/linux/mtd/spinand.h +++ b/include/linux/mtd/spinand.h @@ -17,7 +17,6 @@ #include <linux/spi/spi.h> #include <linux/spi/spi-mem.h> #else -#include <common.h> #include <spi.h> #include <spi-mem.h> #include <linux/mtd/nand.h> diff --git a/include/linux/time.h b/include/linux/time.h index 14ff5b6f481..14a144d9c9c 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -11,6 +11,15 @@ #define _REENT_ONLY +#define MSEC_PER_SEC 1000L +#define USEC_PER_MSEC 1000L +#define NSEC_PER_USEC 1000L +#define NSEC_PER_MSEC 1000000L +#define USEC_PER_SEC 1000000L +#define NSEC_PER_SEC 1000000000L +#define PSEC_PER_SEC 1000000000000LL +#define FSEC_PER_SEC 1000000000000000LL + #define SECSPERMIN 60L #define MINSPERHOUR 60L #define HOURSPERDAY 24L diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 935e5c0cbb1..bb1eb93bd20 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -21,7 +21,6 @@ * the composite model the host can use both functions at the same time. */ -#include <common.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/bitmap.h> diff --git a/include/miiphy.h b/include/miiphy.h index c66a1845b58..5abffd8fb6b 100644 --- a/include/miiphy.h +++ b/include/miiphy.h @@ -14,7 +14,6 @@ #ifndef _miiphy_h_ #define _miiphy_h_ -#include <common.h> #include <linux/mii.h> #include <linux/list.h> #include <net.h> diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 5926c8090a4..aa8803413cd 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -6,8 +6,6 @@ #ifndef __MPC83XX_H__ #define __MPC83XX_H__ -#include <config.h> -#include <asm/fsl_lbc.h> #if defined(CONFIG_E300) #include <asm/e300.h> #endif diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index 52cd1c4dbc4..f4aecaac75f 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -163,7 +163,7 @@ struct cfi_pri_hdr { #if defined(CONFIG_SYS_MAX_FLASH_BANKS_DETECT) /* map to cfi_flash_num_flash_banks only when supported */ #if IS_ENABLED(CONFIG_FLASH_CFI_DRIVER) && \ - (!IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_SPL_MTD_SUPPORT)) + (!IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_SPL_MTD)) #define CFI_FLASH_BANKS (cfi_flash_num_flash_banks) /* board code can update this variable before CFI detection */ extern int cfi_flash_num_flash_banks; diff --git a/include/mv88e6352.h b/include/mv88e6352.h index 2e810c8183e..152a0774fc0 100644 --- a/include/mv88e6352.h +++ b/include/mv88e6352.h @@ -7,7 +7,6 @@ #ifndef __MV886352_H #define __MV886352_H -#include <common.h> /* PHY registers */ #define PHY(itf) (itf) diff --git a/include/nand.h b/include/nand.h index 70c1286ccb4..220ffa202ef 100644 --- a/include/nand.h +++ b/include/nand.h @@ -11,7 +11,9 @@ #include <config.h> extern void nand_init(void); +void nand_reinit(void); unsigned long nand_size(void); +unsigned int nand_page_size(void); #include <linux/compat.h> #include <linux/mtd/mtd.h> @@ -21,6 +23,7 @@ int nand_mtd_to_devnum(struct mtd_info *mtd); #if CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT) void board_nand_init(void); int nand_register(int devnum, struct mtd_info *mtd); +void nand_unregister(struct mtd_info *mtd); #else struct nand_chip; diff --git a/include/net.h b/include/net.h index e63a946002d..ac511eab103 100644 --- a/include/net.h +++ b/include/net.h @@ -930,4 +930,21 @@ void eth_set_enable_bootdevs(bool enable); static inline void eth_set_enable_bootdevs(bool enable) {} #endif +/** + * wget_with_dns() - runs dns host IP address resulution before wget + * + * @dst_addr: destination address to download the file + * @uri: uri string of target file of wget + * Return: downloaded file size, negative if failed + */ +int wget_with_dns(ulong dst_addr, char *uri); + +/** + * wget_validate_uri() - varidate the uri + * + * @uri: uri string of target file of wget + * Return: true if uri is valid, false if uri is invalid + */ +bool wget_validate_uri(char *uri); + #endif /* __NET_H__ */ diff --git a/include/net/ncsi.h b/include/net/ncsi.h index 2800c842b72..7aec457562d 100644 --- a/include/net/ncsi.h +++ b/include/net/ncsi.h @@ -5,7 +5,6 @@ * Copyright (C) 2019, IBM Corporation. */ -#include <common.h> #include <phy.h> bool ncsi_active(void); diff --git a/include/os.h b/include/os.h index fc8a1b15cbf..877404a6c13 100644 --- a/include/os.h +++ b/include/os.h @@ -109,6 +109,19 @@ int os_unlink(const char *pathname); int os_persistent_file(char *buf, int maxsize, const char *fname); /** + * os_mktemp() - Create a temporary file + * @fname: The template to use for the file name. This must end with 6 Xs. It + * will be modified to the opened filename on success. + * @size: The size of the file + * + * Create a temporary file using @fname as a template, unlink it, and truncate + * it to @size. + * + * Return: A file descriptor, or negative errno on error + */ +int os_mktemp(char *fname, off_t size); + +/** * os_exit() - access to the OS exit() system call * * This exits with the supplied return code, which should be 0 to indicate diff --git a/include/palmas.h b/include/palmas.h index e259a4d04ba..c13b67a84d9 100644 --- a/include/palmas.h +++ b/include/palmas.h @@ -6,7 +6,6 @@ #ifndef PALMAS_H #define PALMAS_H -#include <common.h> #include <i2c.h> /* I2C chip addresses, TW6035/37 */ diff --git a/include/post.h b/include/post.h index 6e88d550722..da851e37fa2 100644 --- a/include/post.h +++ b/include/post.h @@ -11,7 +11,6 @@ #define _POST_H #ifndef __ASSEMBLY__ -#include <common.h> #include <asm/io.h> #if defined(CONFIG_POST) diff --git a/include/sata.h b/include/sata.h index 6111cf65d9d..8414e77e42b 100644 --- a/include/sata.h +++ b/include/sata.h @@ -2,22 +2,6 @@ #define __SATA_H__ #include <part.h> -#if !defined(CONFIG_DM_SCSI) && !defined(CONFIG_AHCI) -int init_sata(int dev); -int reset_sata(int dev); -int scan_sata(int dev); -ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer); -ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer); - -int sata_initialize(void); -int __sata_initialize(void); -int sata_stop(void); -int __sata_stop(void); -int sata_port_status(int dev, int port); - -extern struct blk_desc sata_dev_desc[]; -#endif - int sata_probe(int devnum); int sata_remove(int devnum); diff --git a/include/scsi.h b/include/scsi.h index ee9d622680d..cf756aa62e1 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -10,10 +10,6 @@ #include <bouncebuf.h> #include <linux/dma-direction.h> -/* Fix this to the maximum */ -#define SCSI_MAX_DEVICE \ - (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) - struct udevice; /** @@ -355,11 +351,6 @@ int scsi_scan(bool verbose); */ int scsi_scan_dev(struct udevice *dev, bool verbose); -#ifndef CONFIG_DM_SCSI -void scsi_low_level_init(int busdevfunc); -void scsi_init(void); -#endif - #define SCSI_IDENTIFY 0xC0 /* not used */ /* Hardware errors */ diff --git a/include/spi.h b/include/spi.h index 1bc18e65525..7e38cc2a2ad 100644 --- a/include/spi.h +++ b/include/spi.h @@ -9,7 +9,6 @@ #ifndef _SPI_H_ #define _SPI_H_ -#include <common.h> #include <linux/bitops.h> /* SPI mode flags */ diff --git a/include/spl.h b/include/spl.h index 8ff20adc28e..09521889014 100644 --- a/include/spl.h +++ b/include/spl.h @@ -285,30 +285,53 @@ static inline void *spl_image_fdt_addr(struct spl_image_info *info) /** * Information required to load data from a device * - * @dev: Pointer to the device, e.g. struct mmc * * @priv: Private data for the device * @bl_len: Block length for reading in bytes - * @filename: Name of the fit image file. * @read: Function to call to read from the device */ struct spl_load_info { - void *dev; void *priv; - int bl_len; - const char *filename; /** * read() - Read from device * * @load: Information about the load state - * @sector: Sector number to read from (each @load->bl_len bytes) - * @count: Number of sectors to read + * @offset: Offset to read from in bytes. This must be a multiple of + * @load->bl_len. + * @count: Number of bytes to read. This must be a multiple of + * @load->bl_len. * @buf: Buffer to read into - * @return number of sectors read, 0 on error + * @return number of bytes read, 0 on error */ ulong (*read)(struct spl_load_info *load, ulong sector, ulong count, void *buf); +#if IS_ENABLED(CONFIG_SPL_LOAD_BLOCK) + int bl_len; +}; + +static inline int spl_get_bl_len(struct spl_load_info *info) +{ + return info->bl_len; +} + +static inline void spl_set_bl_len(struct spl_load_info *info, int bl_len) +{ + info->bl_len = bl_len; +} +#else }; +static inline int spl_get_bl_len(struct spl_load_info *info) +{ + return 1; +} + +static inline void spl_set_bl_len(struct spl_load_info *info, int bl_len) +{ + if (bl_len != 1) + panic("CONFIG_SPL_LOAD_BLOCK not enabled"); +} +#endif + /* * We need to know the position of U-Boot in memory so we can jump to it. We * allow any U-Boot binary to be used (u-boot.bin, u-boot-nodtb.bin, @@ -370,7 +393,8 @@ void *spl_load_simple_fit_fix_load(const void *fit); * spl_load_simple_fit() - Loads a fit image from a device. * @spl_image: Image description to set up * @info: Structure containing the information required to load data. - * @sector: Sector number where FIT image is located in the device + * @offset: Offset where FIT image is located in the device. Must be aligned + * to the device's bl_len. * @fdt: Pointer to the copied FIT header. * * Reads the FIT image @sector in the device. Loads u-boot image to @@ -378,12 +402,25 @@ void *spl_load_simple_fit_fix_load(const void *fit); * Returns 0 on success. */ int spl_load_simple_fit(struct spl_image_info *spl_image, - struct spl_load_info *info, ulong sector, void *fdt); + struct spl_load_info *info, ulong offset, void *fdt); #define SPL_COPY_PAYLOAD_ONLY 1 #define SPL_FIT_FOUND 2 /** + * spl_load_legacy_lzma() - Load an LZMA-compressed legacy image + * @spl_image: Image description (already set up) + * @load: Structure containing the information required to load data. + * @offset: Pointer to image + * + * Load/decompress an LZMA-compressed legacy image from the device. + * + * Return: 0 on success, or a negative error on failure + */ +int spl_load_legacy_lzma(struct spl_image_info *spl_image, + struct spl_load_info *load, ulong offset); + +/** * spl_load_legacy_img() - Loads a legacy image from a device. * @spl_image: Image description to set up * @load: Structure containing the information required to load data. @@ -404,13 +441,14 @@ int spl_load_legacy_img(struct spl_image_info *spl_image, * spl_load_imx_container() - Loads a imx container image from a device. * @spl_image: Image description to set up * @info: Structure containing the information required to load data. - * @sector: Sector number where container image is located in the device + * @sector: Offset where container image is located in the device. Must be + * aligned to the device block size. * * Reads the container image @sector in the device. Loads u-boot image to * specified load address. */ int spl_load_imx_container(struct spl_image_info *spl_image, - struct spl_load_info *info, ulong sector); + struct spl_load_info *info, ulong offset); /* SPL common functions */ void preloader_console_init(void); diff --git a/include/spl_load.h b/include/spl_load.h new file mode 100644 index 00000000000..1c2b296c0a2 --- /dev/null +++ b/include/spl_load.h @@ -0,0 +1,144 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) Sean Anderson <seanga2@gmail.com> + */ +#ifndef _SPL_LOAD_H_ +#define _SPL_LOAD_H_ + +#include <image.h> +#include <imx_container.h> +#include <mapmem.h> +#include <spl.h> + +static inline int _spl_load(struct spl_image_info *spl_image, + const struct spl_boot_device *bootdev, + struct spl_load_info *info, size_t size, + size_t offset) +{ + struct legacy_img_hdr *header = + spl_get_load_buffer(-sizeof(*header), sizeof(*header)); + ulong base_offset, image_offset, overhead; + int read, ret; + + read = info->read(info, offset, ALIGN(sizeof(*header), + spl_get_bl_len(info)), header); + if (read < sizeof(*header)) + return -EIO; + + if (image_get_magic(header) == FDT_MAGIC) { + if (IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL)) { + void *buf; + + /* + * In order to support verifying images in the FIT, we + * need to load the whole FIT into memory. Try and + * guess how much we need to load by using the total + * size. This will fail for FITs with external data, + * but there's not much we can do about that. + */ + if (!size) + size = round_up(fdt_totalsize(header), 4); + buf = map_sysmem(CONFIG_SYS_LOAD_ADDR, size); + read = info->read(info, offset, + ALIGN(size, spl_get_bl_len(info)), + buf); + if (read < size) + return -EIO; + + return spl_parse_image_header(spl_image, bootdev, buf); + } + + if (IS_ENABLED(CONFIG_SPL_LOAD_FIT)) + return spl_load_simple_fit(spl_image, info, offset, + header); + } + + if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER) && + valid_container_hdr((void *)header)) + return spl_load_imx_container(spl_image, info, offset); + + if (IS_ENABLED(CONFIG_SPL_LZMA) && + image_get_magic(header) == IH_MAGIC && + image_get_comp(header) == IH_COMP_LZMA) { + spl_image->flags |= SPL_COPY_PAYLOAD_ONLY; + ret = spl_parse_image_header(spl_image, bootdev, header); + if (ret) + return ret; + + return spl_load_legacy_lzma(spl_image, info, offset); + } + + ret = spl_parse_image_header(spl_image, bootdev, header); + if (ret) + return ret; + + base_offset = spl_image->offset; + /* Only NOR sets this flag. */ + if (IS_ENABLED(CONFIG_SPL_NOR_SUPPORT) && + spl_image->flags & SPL_COPY_PAYLOAD_ONLY) + base_offset += sizeof(*header); + image_offset = ALIGN_DOWN(base_offset, spl_get_bl_len(info)); + overhead = base_offset - image_offset; + size = ALIGN(spl_image->size + overhead, spl_get_bl_len(info)); + + read = info->read(info, offset + image_offset, size, + map_sysmem(spl_image->load_addr - overhead, size)); + return read < spl_image->size ? -EIO : 0; +} + +/* + * Although spl_load results in size reduction for callers, this is generally + * not enough to counteract the bloat if there is only one caller. The core + * problem is that the compiler can't optimize across translation units. The + * general solution to this is CONFIG_LTO, but that is not available on all + * architectures. Perform a pseudo-LTO just for this function by declaring it + * inline if there is one caller, and extern otherwise. + */ +#define SPL_LOAD_USERS \ + IS_ENABLED(CONFIG_SPL_BLK_FS) + \ + IS_ENABLED(CONFIG_SPL_FS_EXT4) + \ + IS_ENABLED(CONFIG_SPL_FS_FAT) + \ + IS_ENABLED(CONFIG_SPL_SYS_MMCSD_RAW_MODE) + \ + (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT) && !IS_ENABLED(CONFIG_SPL_UBI)) + \ + IS_ENABLED(CONFIG_SPL_NET) + \ + IS_ENABLED(CONFIG_SPL_NOR_SUPPORT) + \ + IS_ENABLED(CONFIG_SPL_SEMIHOSTING) + \ + IS_ENABLED(CONFIG_SPL_SPI_LOAD) + \ + 0 + +#if SPL_LOAD_USERS > 1 +/** + * spl_load() - Parse a header and load the image + * @spl_image: Image data which will be filled in by this function + * @bootdev: The device to load from + * @info: Describes how to load additional information from @bootdev. At the + * minimum, read() and bl_len must be populated. + * @size: The size of the image, in bytes, if it is known in advance. Some boot + * devices (such as filesystems) know how big an image is before parsing + * the header. If 0, then the size will be determined from the header. + * @offset: The offset from the start of @bootdev, in bytes. This should have + * the offset @header was loaded from. It will be added to any offsets + * passed to @info->read(). + * + * This function determines the image type (FIT, legacy, i.MX, raw, etc), calls + * the appropriate parsing function, determines the load address, and the loads + * the image from storage. It is designed to replace ad-hoc image loading which + * may not support all image types (especially when config options are + * involved). + * + * Return: 0 on success, or a negative error on failure + */ +int spl_load(struct spl_image_info *spl_image, + const struct spl_boot_device *bootdev, struct spl_load_info *info, + size_t size, size_t offset); +#else +static inline int spl_load(struct spl_image_info *spl_image, + const struct spl_boot_device *bootdev, + struct spl_load_info *info, size_t size, + size_t offset) +{ + return _spl_load(spl_image, bootdev, info, size, offset); +} +#endif + +#endif /* _SPL_LOAD_H_ */ diff --git a/include/system-constants.h b/include/system-constants.h index 59371568d1e..d688629f119 100644 --- a/include/system-constants.h +++ b/include/system-constants.h @@ -41,4 +41,8 @@ #define SPL_PAYLOAD_ARGS_ADDR 0 #endif +/* Number of pages per block */ +#define SYS_NAND_BLOCK_PAGES \ + (CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE) + #endif diff --git a/include/tegra-kbc.h b/include/tegra-kbc.h index f331c79c9d5..1208b75ee78 100644 --- a/include/tegra-kbc.h +++ b/include/tegra-kbc.h @@ -7,7 +7,6 @@ #ifndef __include_tegra_kbc_h__ #define __include_tegra_kbc_h__ -#include <common.h> #define KEY_IS_MODIFIER(key) ((key) >= KEY_FIRST_MODIFIER) diff --git a/include/test/spl.h b/include/test/spl.h index c1f64658502..a2a5f33e328 100644 --- a/include/test/spl.h +++ b/include/test/spl.h @@ -81,6 +81,10 @@ size_t create_image(void *dst, enum spl_test_image type, int check_image_info(struct unit_test_state *uts, struct spl_image_info *info1, struct spl_image_info *info2); +/* Some compressed data and it size */ +extern const char lzma_compressed[]; +extern const size_t lzma_compressed_size; + /** * typedef write_image_t - Callback for writing an image * @uts: Current unit test state diff --git a/include/twl4030.h b/include/twl4030.h index 0a6d85a7c1c..ee80bb1f6b9 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -11,7 +11,6 @@ #ifndef TWL4030_H #define TWL4030_H -#include <common.h> #include <i2c.h> /* I2C chip addresses */ diff --git a/include/twl6030.h b/include/twl6030.h index 05d476f8048..e3a1058091a 100644 --- a/include/twl6030.h +++ b/include/twl6030.h @@ -7,7 +7,6 @@ #ifndef TWL6030_H #define TWL6030_H -#include <common.h> #include <i2c.h> /* I2C chip addresses */ diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h index 6da348eb628..d7a8851094b 100644 --- a/include/ubi_uboot.h +++ b/include/ubi_uboot.h @@ -14,7 +14,6 @@ #ifndef __UBOOT_UBI_H #define __UBOOT_UBI_H -#include <common.h> #include <compiler.h> #include <linux/compat.h> #include <malloc.h> diff --git a/include/usbdevice.h b/include/usbdevice.h index 80c5af0cbcd..e59f5587eea 100644 --- a/include/usbdevice.h +++ b/include/usbdevice.h @@ -17,7 +17,6 @@ #ifndef __USBDCORE_H__ #define __USBDCORE_H__ -#include <common.h> #include "usbdescriptors.h" diff --git a/lib/Kconfig b/lib/Kconfig index 19649517a39..9ae846ea5f7 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -74,6 +74,13 @@ config HAVE_PRIVATE_LIBGCC config LIB_UUID bool +config RANDOM_UUID + bool "GPT Random UUID generation" + select LIB_UUID + help + Enable the generation of partitions with random UUIDs if none + are provided. + config SPL_LIB_UUID depends on SPL bool @@ -93,7 +100,7 @@ config SEMIHOSTING config SEMIHOSTING_FALLBACK bool "Recover gracefully when semihosting fails" - depends on SEMIHOSTING && (ARM64 || RISCV) + depends on SEMIHOSTING default y help Normally, if U-Boot makes a semihosting call and no debugger is @@ -116,7 +123,7 @@ config SPL_SEMIHOSTING config SPL_SEMIHOSTING_FALLBACK bool "Recover gracefully when semihosting fails in SPL" - depends on SPL_SEMIHOSTING && (ARM64 || RISCV) + depends on SPL_SEMIHOSTING select ARMV8_SPL_EXCEPTION_VECTORS if ARM64 default y help diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig index 4ccd26f94a9..2913d1c9dfe 100644 --- a/lib/efi_loader/Kconfig +++ b/lib/efi_loader/Kconfig @@ -32,14 +32,14 @@ config EFI_LOADER if EFI_LOADER -config CMD_BOOTEFI_BOOTMGR +config BOOTEFI_BOOTMGR bool "UEFI Boot Manager" default y select BOOTMETH_GLOBAL if BOOTSTD help Select this option if you want to select the UEFI binary to be booted - via UEFI variables Boot####, BootOrder, and BootNext. This enables the - 'bootefi bootmgr' command. + via UEFI variables Boot####, BootOrder, and BootNext. You should also + normally enable CMD_BOOTEFI_BOOTMGR so that the command is available. choice prompt "Store for non-volatile UEFI variables" @@ -477,4 +477,13 @@ config EFI_RISCV_BOOT_PROTOCOL replace the transfer via the device-tree. The latter is not possible on systems using ACPI. +config EFI_HTTP_BOOT + bool "EFI HTTP Boot support" + select CMD_DNS + select CMD_WGET + select BLKMAP + help + Enabling this option adds EFI HTTP Boot support. It allows to + directly boot from network. + endif diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile index 8d31fc61c60..0a2cb6e3c47 100644 --- a/lib/efi_loader/Makefile +++ b/lib/efi_loader/Makefile @@ -42,7 +42,7 @@ targets += initrddump.o endif obj-$(CONFIG_CMD_BOOTEFI_HELLO) += helloworld_efi.o -obj-$(CONFIG_CMD_BOOTEFI_BOOTMGR) += efi_bootmgr.o +obj-$(CONFIG_BOOTEFI_BOOTMGR) += efi_bootmgr.o obj-y += efi_boottime.o obj-y += efi_helper.o obj-$(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) += efi_capsule.o diff --git a/lib/efi_loader/efi_bootmgr.c b/lib/efi_loader/efi_bootmgr.c index a40762c74c8..48153bd5ffb 100644 --- a/lib/efi_loader/efi_bootmgr.c +++ b/lib/efi_loader/efi_bootmgr.c @@ -7,10 +7,14 @@ #define LOG_CATEGORY LOGC_EFI +#include <blk.h> +#include <blkmap.h> #include <common.h> #include <charset.h> +#include <dm.h> #include <log.h> #include <malloc.h> +#include <net.h> #include <efi_default_filename.h> #include <efi_loader.h> #include <efi_variable.h> @@ -19,6 +23,23 @@ static const struct efi_boot_services *bs; static const struct efi_runtime_services *rs; +/** + * struct uridp_context - uri device path resource + * + * @image_size: image size + * @image_addr: image address + * @loaded_dp: pointer to loaded device path + * @ramdisk_blk_dev: pointer to the ramdisk blk device + * @mem_handle: efi_handle to the loaded PE-COFF image + */ +struct uridp_context { + ulong image_size; + ulong image_addr; + struct efi_device_path *loaded_dp; + struct udevice *ramdisk_blk_dev; + efi_handle_t mem_handle; +}; + const efi_guid_t efi_guid_bootmenu_auto_generated = EFICONFIG_AUTO_GENERATED_ENTRY_GUID; @@ -169,6 +190,364 @@ out: } /** + * mount_image() - mount the image with blkmap + * + * @lo_label: u16 label string of load option + * @addr: image address + * @size: image size + * Return: pointer to the UCLASS_BLK udevice, NULL if failed + */ +static struct udevice *mount_image(u16 *lo_label, ulong addr, ulong size) +{ + int err; + struct blkmap *bm; + struct udevice *bm_dev; + char *label = NULL, *p; + + label = efi_alloc(utf16_utf8_strlen(lo_label) + 1); + if (!label) + return NULL; + + p = label; + utf16_utf8_strcpy(&p, lo_label); + err = blkmap_create_ramdisk(label, addr, size, &bm_dev); + if (err) { + efi_free_pool(label); + return NULL; + } + bm = dev_get_plat(bm_dev); + + efi_free_pool(label); + + return bm->blk; +} + +/** + * search_default_file() - search default file + * + * @dev: pointer to the UCLASS_BLK or UCLASS_PARTITION udevice + * @loaded_dp: pointer to default file device path + * Return: status code + */ +static efi_status_t search_default_file(struct udevice *dev, + struct efi_device_path **loaded_dp) +{ + efi_status_t ret; + efi_handle_t handle; + u16 *default_file_name = NULL; + struct efi_file_handle *root, *f; + struct efi_device_path *dp = NULL, *fp = NULL; + struct efi_simple_file_system_protocol *file_system; + struct efi_device_path *device_path, *full_path = NULL; + + if (dev_tag_get_ptr(dev, DM_TAG_EFI, (void **)&handle)) { + log_warning("DM_TAG_EFI not found\n"); + return EFI_INVALID_PARAMETER; + } + + ret = EFI_CALL(bs->open_protocol(handle, &efi_guid_device_path, + (void **)&device_path, efi_root, NULL, + EFI_OPEN_PROTOCOL_GET_PROTOCOL)); + if (ret != EFI_SUCCESS) + return ret; + + ret = EFI_CALL(bs->open_protocol(handle, &efi_simple_file_system_protocol_guid, + (void **)&file_system, efi_root, NULL, + EFI_OPEN_PROTOCOL_GET_PROTOCOL)); + if (ret != EFI_SUCCESS) + return ret; + + ret = EFI_CALL(file_system->open_volume(file_system, &root)); + if (ret != EFI_SUCCESS) + return ret; + + full_path = expand_media_path(device_path); + ret = efi_dp_split_file_path(full_path, &dp, &fp); + if (ret != EFI_SUCCESS) + goto err; + + default_file_name = efi_dp_str(fp); + efi_free_pool(dp); + efi_free_pool(fp); + if (!default_file_name) { + ret = EFI_OUT_OF_RESOURCES; + goto err; + } + + ret = EFI_CALL(root->open(root, &f, default_file_name, + EFI_FILE_MODE_READ, 0)); + efi_free_pool(default_file_name); + if (ret != EFI_SUCCESS) + goto err; + + EFI_CALL(f->close(f)); + EFI_CALL(root->close(root)); + + *loaded_dp = full_path; + + return EFI_SUCCESS; + +err: + EFI_CALL(root->close(root)); + efi_free_pool(full_path); + + return ret; +} + +/** + * check_disk_has_default_file() - load the default file + * + * @blk: pointer to the UCLASS_BLK udevice + * @dp: pointer to default file device path + * Return: status code + */ +static efi_status_t check_disk_has_default_file(struct udevice *blk, + struct efi_device_path **dp) +{ + efi_status_t ret; + struct udevice *partition; + + /* image that has no partition table but a file system */ + ret = search_default_file(blk, dp); + if (ret == EFI_SUCCESS) + return ret; + + /* try the partitions */ + device_foreach_child(partition, blk) { + enum uclass_id id; + + id = device_get_uclass_id(partition); + if (id != UCLASS_PARTITION) + continue; + + ret = search_default_file(partition, dp); + if (ret == EFI_SUCCESS) + return ret; + } + + return EFI_NOT_FOUND; +} + +/** + * prepare_loaded_image() - prepare ramdisk for downloaded image + * + * @label: label of load option + * @addr: image address + * @size: image size + * @dp: pointer to default file device path + * @blk: pointer to created blk udevice + * Return: status code + */ +static efi_status_t prepare_loaded_image(u16 *label, ulong addr, ulong size, + struct efi_device_path **dp, + struct udevice **blk) +{ + efi_status_t ret; + struct udevice *ramdisk_blk; + + ramdisk_blk = mount_image(label, addr, size); + if (!ramdisk_blk) + return EFI_LOAD_ERROR; + + ret = check_disk_has_default_file(ramdisk_blk, dp); + if (ret != EFI_SUCCESS) { + log_info("Cannot boot from downloaded image\n"); + goto err; + } + + /* + * TODO: expose the ramdisk to OS. + * Need to pass the ramdisk information by the architecture-specific + * methods such as 'pmem' device-tree node. + */ + ret = efi_add_memory_map(addr, size, EFI_RESERVED_MEMORY_TYPE); + if (ret != EFI_SUCCESS) { + log_err("Memory reservation failed\n"); + goto err; + } + + *blk = ramdisk_blk; + + return EFI_SUCCESS; + +err: + if (blkmap_destroy(ramdisk_blk->parent)) + log_err("Destroying blkmap failed\n"); + + return ret; +} + +/** + * efi_bootmgr_release_uridp_resource() - cleanup uri device path resource + * + * @ctx: event context + * Return: status code + */ +efi_status_t efi_bootmgr_release_uridp_resource(struct uridp_context *ctx) +{ + efi_status_t ret = EFI_SUCCESS; + + if (!ctx) + return ret; + + /* cleanup for iso or img image */ + if (ctx->ramdisk_blk_dev) { + ret = efi_add_memory_map(ctx->image_addr, ctx->image_size, + EFI_CONVENTIONAL_MEMORY); + if (ret != EFI_SUCCESS) + log_err("Reclaiming memory failed\n"); + + if (blkmap_destroy(ctx->ramdisk_blk_dev->parent)) { + log_err("Destroying blkmap failed\n"); + ret = EFI_DEVICE_ERROR; + } + } + + /* cleanup for PE-COFF image */ + if (ctx->mem_handle) { + ret = efi_uninstall_multiple_protocol_interfaces( + ctx->mem_handle, &efi_guid_device_path, ctx->loaded_dp, + NULL); + if (ret != EFI_SUCCESS) + log_err("Uninstall device_path protocol failed\n"); + } + + efi_free_pool(ctx->loaded_dp); + free(ctx); + + return ret; +} + +/** + * efi_bootmgr_image_return_notify() - return to efibootmgr callback + * + * @event: the event for which this notification function is registered + * @context: event context + */ +static void EFIAPI efi_bootmgr_image_return_notify(struct efi_event *event, + void *context) +{ + efi_status_t ret; + + EFI_ENTRY("%p, %p", event, context); + ret = efi_bootmgr_release_uridp_resource(context); + EFI_EXIT(ret); +} + +/** + * try_load_from_uri_path() - Handle the URI device path + * + * @uridp: uri device path + * @lo_label: label of load option + * @handle: pointer to handle for newly installed image + * Return: status code + */ +static efi_status_t try_load_from_uri_path(struct efi_device_path_uri *uridp, + u16 *lo_label, + efi_handle_t *handle) +{ + char *s; + int err; + int uri_len; + efi_status_t ret; + void *source_buffer; + efi_uintn_t source_size; + struct uridp_context *ctx; + struct udevice *blk = NULL; + struct efi_event *event = NULL; + efi_handle_t mem_handle = NULL; + struct efi_device_path *loaded_dp; + static ulong image_size, image_addr; + + ctx = calloc(1, sizeof(struct uridp_context)); + if (!ctx) + return EFI_OUT_OF_RESOURCES; + + s = env_get("loadaddr"); + if (!s) { + log_err("Error: loadaddr is not set\n"); + ret = EFI_INVALID_PARAMETER; + goto err; + } + + image_addr = hextoul(s, NULL); + err = wget_with_dns(image_addr, uridp->uri); + if (err < 0) { + ret = EFI_INVALID_PARAMETER; + goto err; + } + + image_size = env_get_hex("filesize", 0); + if (!image_size) { + ret = EFI_INVALID_PARAMETER; + goto err; + } + + /* + * If the file extension is ".iso" or ".img", mount it and try to load + * the default file. + * If the file is PE-COFF image, load the downloaded file. + */ + uri_len = strlen(uridp->uri); + if (!strncmp(&uridp->uri[uri_len - 4], ".iso", 4) || + !strncmp(&uridp->uri[uri_len - 4], ".img", 4)) { + ret = prepare_loaded_image(lo_label, image_addr, image_size, + &loaded_dp, &blk); + if (ret != EFI_SUCCESS) + goto err; + + source_buffer = NULL; + source_size = 0; + } else if (efi_check_pe((void *)image_addr, image_size, NULL) == EFI_SUCCESS) { + /* + * loaded_dp must exist until efi application returns, + * will be freed in return_to_efibootmgr event callback. + */ + loaded_dp = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE, + (uintptr_t)image_addr, image_size); + ret = efi_install_multiple_protocol_interfaces( + &mem_handle, &efi_guid_device_path, loaded_dp, NULL); + if (ret != EFI_SUCCESS) + goto err; + + source_buffer = (void *)image_addr; + source_size = image_size; + } else { + log_err("Error: file type is not supported\n"); + ret = EFI_UNSUPPORTED; + goto err; + } + + ctx->image_size = image_size; + ctx->image_addr = image_addr; + ctx->loaded_dp = loaded_dp; + ctx->ramdisk_blk_dev = blk; + ctx->mem_handle = mem_handle; + + ret = EFI_CALL(efi_load_image(false, efi_root, loaded_dp, source_buffer, + source_size, handle)); + if (ret != EFI_SUCCESS) + goto err; + + /* create event for cleanup when the image returns or error occurs */ + ret = efi_create_event(EVT_NOTIFY_SIGNAL, TPL_CALLBACK, + efi_bootmgr_image_return_notify, ctx, + &efi_guid_event_group_return_to_efibootmgr, + &event); + if (ret != EFI_SUCCESS) { + log_err("Creating event failed\n"); + goto err; + } + + return ret; + +err: + efi_bootmgr_release_uridp_resource(ctx); + + return ret; +} + +/** * try_load_entry() - try to load image for boot option * * Attempt to load load-option number 'n', returning device_path and file_path @@ -211,6 +590,13 @@ static efi_status_t try_load_entry(u16 n, efi_handle_t *handle, if (EFI_DP_TYPE(lo.file_path, MEDIA_DEVICE, FILE_PATH)) { /* file_path doesn't contain a device path */ ret = try_load_from_short_path(lo.file_path, handle); + } else if (EFI_DP_TYPE(lo.file_path, MESSAGING_DEVICE, MSG_URI)) { + if (IS_ENABLED(CONFIG_EFI_HTTP_BOOT)) + ret = try_load_from_uri_path( + (struct efi_device_path_uri *)lo.file_path, + lo.label, handle); + else + ret = EFI_LOAD_ERROR; } else { file_path = expand_media_path(lo.file_path); ret = EFI_CALL(efi_load_image(true, efi_root, file_path, diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c index 0b7579cb5af..3767fa2db42 100644 --- a/lib/efi_loader/efi_boottime.c +++ b/lib/efi_loader/efi_boottime.c @@ -90,6 +90,9 @@ const efi_guid_t efi_guid_event_group_ready_to_boot = /* event group ResetSystem() invoked (before ExitBootServices) */ const efi_guid_t efi_guid_event_group_reset_system = EFI_EVENT_GROUP_RESET_SYSTEM; +/* event group return to efibootmgr */ +const efi_guid_t efi_guid_event_group_return_to_efibootmgr = + EFI_EVENT_GROUP_RETURN_TO_EFIBOOTMGR; /* GUIDs of the Load File and Load File2 protocols */ const efi_guid_t efi_guid_load_file_protocol = EFI_LOAD_FILE_PROTOCOL_GUID; const efi_guid_t efi_guid_load_file2_protocol = EFI_LOAD_FILE2_PROTOCOL_GUID; @@ -712,7 +715,7 @@ efi_status_t efi_create_event(uint32_t type, efi_uintn_t notify_tpl, void (EFIAPI *notify_function) ( struct efi_event *event, void *context), - void *notify_context, efi_guid_t *group, + void *notify_context, const efi_guid_t *group, struct efi_event **event) { struct efi_event *evt; @@ -790,7 +793,7 @@ efi_status_t EFIAPI efi_create_event_ex(uint32_t type, efi_uintn_t notify_tpl, struct efi_event *event, void *context), void *notify_context, - efi_guid_t *event_group, + const efi_guid_t *event_group, struct efi_event **event) { efi_status_t ret; diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c index f0d76113b00..b808a7fe627 100644 --- a/lib/efi_loader/efi_disk.c +++ b/lib/efi_loader/efi_disk.c @@ -690,6 +690,13 @@ int efi_disk_probe(void *ctx, struct event *event) return -1; } + /* only do the boot option management when UEFI sub-system is initialized */ + if (IS_ENABLED(CONFIG_CMD_BOOTEFI_BOOTMGR) && efi_obj_list_initialized == EFI_SUCCESS) { + ret = efi_bootmgr_update_media_device_boot_option(); + if (ret != EFI_SUCCESS) + return -1; + } + return 0; } @@ -742,6 +749,17 @@ int efi_disk_remove(void *ctx, struct event *event) dev_tag_del(dev, DM_TAG_EFI); return 0; + + /* + * TODO A flag to distinguish below 2 different scenarios of this + * function call is needed: + * a) Unplugging of a removable media under U-Boot + * b) U-Boot exiting and booting an OS + * In case of scenario a), efi_bootmgr_update_media_device_boot_option() + * needs to be invoked here to update the boot options and remove the + * unnecessary ones. + */ + } /** diff --git a/lib/efi_loader/efi_setup.c b/lib/efi_loader/efi_setup.c index e6de685e879..37359a77bbc 100644 --- a/lib/efi_loader/efi_setup.c +++ b/lib/efi_loader/efi_setup.c @@ -245,6 +245,13 @@ efi_status_t efi_init_obj_list(void) if (ret != EFI_SUCCESS) goto out; + if (IS_ENABLED(CONFIG_CMD_BOOTEFI_BOOTMGR)) { + /* update boot option after variable service initialized */ + ret = efi_bootmgr_update_media_device_boot_option(); + if (ret != EFI_SUCCESS) + goto out; + } + /* Define supported languages */ ret = efi_init_platform_lang(); if (ret != EFI_SUCCESS) diff --git a/net/wget.c b/net/wget.c index 8bb4d72db1a..6ae2237a0a8 100644 --- a/net/wget.c +++ b/net/wget.c @@ -4,15 +4,20 @@ * Copyright Duncan Hare <dh@synoia.com> 2017 */ +#include <asm/global_data.h> #include <command.h> #include <common.h> #include <display_options.h> #include <env.h> #include <image.h> +#include <lmb.h> #include <mapmem.h> #include <net.h> #include <net/tcp.h> #include <net/wget.h> +#include <stdlib.h> + +DECLARE_GLOBAL_DATA_PTR; static const char bootfile1[] = "GET "; static const char bootfile3[] = " HTTP/1.0\r\n\r\n"; @@ -56,6 +61,29 @@ static unsigned int retry_tcp_ack_num; /* TCP retry acknowledge number*/ static unsigned int retry_tcp_seq_num; /* TCP retry sequence number */ static int retry_len; /* TCP retry length */ +static ulong wget_load_size; + +/** + * wget_init_max_size() - initialize maximum load size + * + * Return: 0 if success, -1 if fails + */ +static int wget_init_load_size(void) +{ + struct lmb lmb; + phys_size_t max_size; + + lmb_init_and_reserve(&lmb, gd->bd, (void *)gd->fdt_blob); + + max_size = lmb_get_free_size(&lmb, image_load_addr); + if (!max_size) + return -1; + + wget_load_size = max_size; + + return 0; +} + /** * store_block() - store block in memory * @src: source of data @@ -64,10 +92,25 @@ static int retry_len; /* TCP retry length */ */ static inline int store_block(uchar *src, unsigned int offset, unsigned int len) { + ulong store_addr = image_load_addr + offset; ulong newsize = offset + len; uchar *ptr; - ptr = map_sysmem(image_load_addr + offset, len); + if (IS_ENABLED(CONFIG_LMB)) { + ulong end_addr = image_load_addr + wget_load_size; + + if (!end_addr) + end_addr = ULONG_MAX; + + if (store_addr < image_load_addr || + store_addr + len > end_addr) { + printf("\nwget error: "); + printf("trying to overwrite reserved memory...\n"); + return -1; + } + } + + ptr = map_sysmem(store_addr, len); memcpy(ptr, src, len); unmap_sysmem(ptr); @@ -248,25 +291,39 @@ static void wget_connected(uchar *pkt, unsigned int tcp_seq_num, net_boot_file_size = 0; - if (len > hlen) - store_block(pkt + hlen, 0, len - hlen); + if (len > hlen) { + if (store_block(pkt + hlen, 0, len - hlen) != 0) { + wget_loop_state = NETLOOP_FAIL; + wget_fail("wget: store error\n", tcp_seq_num, tcp_ack_num, action); + net_set_state(NETLOOP_FAIL); + return; + } + } debug_cond(DEBUG_WGET, "wget: Connected Pkt %p hlen %x\n", pkt, hlen); for (i = 0; i < pkt_q_idx; i++) { + int err; + ptr1 = map_sysmem( (phys_addr_t)(pkt_q[i].pkt), pkt_q[i].len); - store_block(ptr1, - pkt_q[i].tcp_seq_num - - initial_data_seq_num, - pkt_q[i].len); + err = store_block(ptr1, + pkt_q[i].tcp_seq_num - + initial_data_seq_num, + pkt_q[i].len); unmap_sysmem(ptr1); debug_cond(DEBUG_WGET, "wget: Connctd pkt Q %p len %x\n", pkt_q[i].pkt, pkt_q[i].len); + if (err) { + wget_loop_state = NETLOOP_FAIL; + wget_fail("wget: store error\n", tcp_seq_num, tcp_ack_num, action); + net_set_state(NETLOOP_FAIL); + return; + } } } } @@ -338,6 +395,7 @@ static void wget_handler(uchar *pkt, u16 dport, len) != 0) { wget_fail("wget: store error\n", tcp_seq_num, tcp_ack_num, action); + net_set_state(NETLOOP_FAIL); return; } @@ -428,6 +486,15 @@ void wget_start(void) debug_cond(DEBUG_WGET, "\nwget:Load address: 0x%lx\nLoading: *\b", image_load_addr); + if (IS_ENABLED(CONFIG_LMB)) { + if (wget_init_load_size()) { + printf("\nwget error: "); + printf("trying to overwrite reserved memory...\n"); + net_set_state(NETLOOP_FAIL); + return; + } + } + net_set_timeout_handler(wget_timeout, wget_timeout_handler); tcp_set_tcp_handler(wget_handler); @@ -446,3 +513,127 @@ void wget_start(void) wget_send(TCP_SYN, 0, 0, 0); } + +#if (IS_ENABLED(CONFIG_CMD_DNS)) +int wget_with_dns(ulong dst_addr, char *uri) +{ + int ret; + char *s, *host_name, *file_name, *str_copy; + + /* + * Download file using wget. + * + * U-Boot wget takes the target uri in this format. + * "<http server ip>:<file path>" e.g.) 192.168.1.1:/sample/test.iso + * Need to resolve the http server ip address before starting wget. + */ + str_copy = strdup(uri); + if (!str_copy) + return -ENOMEM; + + s = str_copy + strlen("http://"); + host_name = strsep(&s, "/"); + if (!s) { + log_err("Error: invalied uri, no file path\n"); + ret = -EINVAL; + goto out; + } + file_name = s; + + /* TODO: If the given uri has ip address for the http server, skip dns */ + net_dns_resolve = host_name; + net_dns_env_var = "httpserverip"; + if (net_loop(DNS) < 0) { + log_err("Error: dns lookup of %s failed, check setup\n", net_dns_resolve); + ret = -EINVAL; + goto out; + } + s = env_get("httpserverip"); + if (!s) { + ret = -EINVAL; + goto out; + } + + strlcpy(net_boot_file_name, s, sizeof(net_boot_file_name)); + strlcat(net_boot_file_name, ":/", sizeof(net_boot_file_name)); /* append '/' which is removed by strsep() */ + strlcat(net_boot_file_name, file_name, sizeof(net_boot_file_name)); + image_load_addr = dst_addr; + ret = net_loop(WGET); + +out: + free(str_copy); + + return ret; +} +#endif + +/** + * wget_validate_uri() - validate the uri for wget + * + * @uri: uri string + * + * This function follows the current U-Boot wget implementation. + * scheme: only "http:" is supported + * authority: + * - user information: not supported + * - host: supported + * - port: not supported(always use the default port) + * + * Uri is expected to be correctly percent encoded. + * This is the minimum check, control codes(0x1-0x19, 0x7F, except '\0') + * and space character(0x20) are not allowed. + * + * TODO: stricter uri conformance check + * + * Return: true on success, false on failure + */ +bool wget_validate_uri(char *uri) +{ + char c; + bool ret = true; + char *str_copy, *s, *authority; + + for (c = 0x1; c < 0x21; c++) { + if (strchr(uri, c)) { + log_err("invalid character is used\n"); + return false; + } + } + if (strchr(uri, 0x7f)) { + log_err("invalid character is used\n"); + return false; + } + + if (strncmp(uri, "http://", 7)) { + log_err("only http:// is supported\n"); + return false; + } + str_copy = strdup(uri); + if (!str_copy) + return false; + + s = str_copy + strlen("http://"); + authority = strsep(&s, "/"); + if (!s) { + log_err("invalid uri, no file path\n"); + ret = false; + goto out; + } + s = strchr(authority, '@'); + if (s) { + log_err("user information is not supported\n"); + ret = false; + goto out; + } + s = strchr(authority, ':'); + if (s) { + log_err("user defined port is not supported\n"); + ret = false; + goto out; + } + +out: + free(str_copy); + + return ret; +} diff --git a/test/Kconfig b/test/Kconfig index ca648d23376..c3db727c58e 100644 --- a/test/Kconfig +++ b/test/Kconfig @@ -2,6 +2,7 @@ menu "Testing" config UNIT_TEST bool "Unit tests" + depends on CMDLINE help Select this to compile in unit tests for various parts of U-Boot. Test suites will be subcommands of the "ut" command. diff --git a/test/dm/Makefile b/test/dm/Makefile index cb82d839f8a..a3ce7b3889f 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -73,6 +73,7 @@ obj-$(CONFIG_CMD_MUX) += mux-cmd.o obj-$(CONFIG_MULTIPLEXER) += mux-emul.o obj-$(CONFIG_MUX_MMIO) += mux-mmio.o obj-y += fdtdec.o +obj-$(CONFIG_MTD_RAW_NAND) += nand.o obj-$(CONFIG_UT_DM) += nop.o obj-y += ofnode.o obj-y += ofread.o diff --git a/test/dm/eth.c b/test/dm/eth.c index d05d2a9abe1..bb3dcc6b954 100644 --- a/test/dm/eth.c +++ b/test/dm/eth.c @@ -263,12 +263,16 @@ static int dm_test_eth_act(struct unit_test_state *uts) /* Prepare the test scenario */ for (i = 0; i < DM_TEST_ETH_NUM; i++) { + char *addr; + ut_assertok(uclass_find_device_by_name(UCLASS_ETH, ethname[i], &dev[i])); ut_assertok(device_remove(dev[i], DM_REMOVE_NORMAL)); /* Invalidate MAC address */ - strncpy(ethaddr[i], env_get(addrname[i]), 17); + addr = env_get(addrname[i]); + ut_assertnonnull(addr); + strncpy(ethaddr[i], addr, 17); /* Must disable access protection for ethaddr before clearing */ env_set(".flags", addrname[i]); env_set(addrname[i], NULL); @@ -312,12 +316,16 @@ static int dm_test_ethaddr(struct unit_test_state *uts) for (i = 0; i < ARRAY_SIZE(addr); i++) { char addrname[10]; + char *env_addr; if (i) snprintf(addrname, sizeof(addrname), "eth%daddr", i + 1); else strcpy(addrname, "ethaddr"); - ut_asserteq_str(addr[i], env_get(addrname)); + + env_addr = env_get(addrname); + ut_assertnonnull(env_addr); + ut_asserteq_str(addr[i], env_addr); } return 0; diff --git a/test/dm/nand.c b/test/dm/nand.c new file mode 100644 index 00000000000..0b992fdce1c --- /dev/null +++ b/test/dm/nand.c @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Sean Anderson <seanga2@gmail.com> + */ + +#include <nand.h> +#include <part.h> +#include <rand.h> +#include <dm/test.h> +#include <test/test.h> +#include <test/ut.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/rawnand.h> + +static int dm_test_nand(struct unit_test_state *uts, int dev, bool end) +{ + nand_erase_options_t opts = { }; + struct mtd_info *mtd; + size_t length; + loff_t size; + char *buf; + int *gold; + u8 oob[NAND_MAX_OOBSIZE]; + int i; + loff_t off = 0; + mtd_oob_ops_t ops = { }; + + /* Seed RNG for bit errors */ + srand((off >> 32) ^ off ^ ~dev); + + mtd = get_nand_dev_by_index(dev); + ut_assertnonnull(mtd); + size = mtd->erasesize * 4; + length = size; + + buf = malloc(size); + ut_assertnonnull(buf); + gold = malloc(size); + ut_assertnonnull(gold); + + /* Mark a block as bad */ + ut_assertok(mtd_block_markbad(mtd, off + mtd->erasesize)); + + /* Erase some stuff */ + if (end) + off = mtd->size - size - mtd->erasesize; + opts.offset = off; + opts.length = size; + opts.spread = 1; + opts.lim = U32_MAX; + ut_assertok(nand_erase_opts(mtd, &opts)); + + /* Make sure everything is erased */ + memset(gold, 0xff, size); + ut_assertok(nand_read_skip_bad(mtd, off, &length, NULL, U64_MAX, buf)); + ut_asserteq(size, length); + ut_asserteq_mem(gold, buf, size); + + /* ...but our bad block marker is still there */ + ops.oobbuf = oob; + ops.ooblen = mtd->oobsize; + ut_assertok(mtd_read_oob(mtd, mtd->erasesize, &ops)); + ut_asserteq(0, oob[mtd_to_nand(mtd)->badblockpos]); + + /* Generate some data and write it */ + for (i = 0; i < size / sizeof(int); i++) + gold[i] = rand(); + ut_assertok(nand_write_skip_bad(mtd, off, &length, NULL, U64_MAX, + (void *)gold, 0)); + ut_asserteq(size, length); + + /* Verify */ + ut_assertok(nand_read_skip_bad(mtd, off, &length, NULL, U64_MAX, buf)); + ut_asserteq(size, length); + ut_asserteq_mem(gold, buf, size); + + /* Erase some blocks */ + memset(((char *)gold) + mtd->erasesize, 0xff, mtd->erasesize * 2); + opts.offset = off + mtd->erasesize; + opts.length = mtd->erasesize * 2; + ut_assertok(nand_erase_opts(mtd, &opts)); + + /* Verify */ + ut_assertok(nand_read_skip_bad(mtd, off, &length, NULL, U64_MAX, buf)); + ut_asserteq(size, length); + ut_asserteq_mem(gold, buf, size); + + return 0; +} + +#define DM_NAND_TEST(dev) \ +static int dm_test_nand##dev##_start(struct unit_test_state *uts) \ +{ \ + return dm_test_nand(uts, dev, false); \ +} \ +DM_TEST(dm_test_nand##dev##_start, UT_TESTF_SCAN_FDT); \ +static int dm_test_nand##dev##_end(struct unit_test_state *uts) \ +{ \ + return dm_test_nand(uts, dev, true); \ +} \ +DM_TEST(dm_test_nand##dev##_end, UT_TESTF_SCAN_FDT) + +DM_NAND_TEST(0); +DM_NAND_TEST(1); diff --git a/test/dm/sysreset.c b/test/dm/sysreset.c index 691683c5674..5aa69e04618 100644 --- a/test/dm/sysreset.c +++ b/test/dm/sysreset.c @@ -27,8 +27,8 @@ static int dm_test_sysreset_base(struct unit_test_state *uts) /* Device 1 is the warm sysreset device */ ut_assertok(uclass_get_device(UCLASS_SYSRESET, 1, &dev)); ut_asserteq(-EACCES, sysreset_request(dev, SYSRESET_WARM)); - ut_asserteq(-ENOSYS, sysreset_request(dev, SYSRESET_COLD)); - ut_asserteq(-ENOSYS, sysreset_request(dev, SYSRESET_POWER)); + ut_asserteq(-EPROTONOSUPPORT, sysreset_request(dev, SYSRESET_COLD)); + ut_asserteq(-EPROTONOSUPPORT, sysreset_request(dev, SYSRESET_POWER)); state->sysreset_allowed[SYSRESET_WARM] = true; ut_asserteq(-EINPROGRESS, sysreset_request(dev, SYSRESET_WARM)); @@ -36,7 +36,7 @@ static int dm_test_sysreset_base(struct unit_test_state *uts) /* Device 2 is the cold sysreset device */ ut_assertok(uclass_get_device(UCLASS_SYSRESET, 2, &dev)); - ut_asserteq(-ENOSYS, sysreset_request(dev, SYSRESET_WARM)); + ut_asserteq(-EPROTONOSUPPORT, sysreset_request(dev, SYSRESET_WARM)); state->sysreset_allowed[SYSRESET_COLD] = false; ut_asserteq(-EACCES, sysreset_request(dev, SYSRESET_COLD)); state->sysreset_allowed[SYSRESET_COLD] = true; diff --git a/test/image/Kconfig b/test/image/Kconfig index 8f9e6ae036b..45b6e8c52e6 100644 --- a/test/image/Kconfig +++ b/test/image/Kconfig @@ -23,6 +23,15 @@ config SPL_UT_LOAD_FS help Test filesystems and the various load methods which use them. +config SPL_UT_LOAD_NAND + bool "Test loading from NAND flash" + depends on SANDBOX && SPL_OF_REAL + depends on SPL_NAND_SUPPORT + depends on SPL_MTD + default y + help + Test the NAND flash load method. + config SPL_UT_LOAD_NET bool "Test loading over TFTP" depends on SANDBOX && SPL_OF_REAL @@ -43,6 +52,7 @@ config SPL_UT_LOAD_SPI config SPL_UT_LOAD_OS bool "Test loading from the host OS" depends on SANDBOX && SPL_LOAD_FIT + select SPL_LOAD_BLOCK default y help Smoke test to ensure that loading U-boot works in sandbox. diff --git a/test/image/Makefile b/test/image/Makefile index b30210106a4..11ed25734e8 100644 --- a/test/image/Makefile +++ b/test/image/Makefile @@ -4,6 +4,7 @@ obj-y += spl_load.o obj-$(CONFIG_SPL_UT_LOAD_FS) += spl_load_fs.o +obj-$(CONFIG_SPL_UT_LOAD_NAND) += spl_load_nand.o obj-$(CONFIG_SPL_UT_LOAD_NET) += spl_load_net.o obj-$(CONFIG_SPL_NOR_SUPPORT) += spl_load_nor.o obj-$(CONFIG_SPL_UT_LOAD_OS) += spl_load_os.o diff --git a/test/image/spl_load.c b/test/image/spl_load.c index ab4c14d6491..e1036eff28c 100644 --- a/test/image/spl_load.c +++ b/test/image/spl_load.c @@ -342,12 +342,11 @@ static int spl_test_image(struct unit_test_state *uts, const char *test_name, if (check_image_info(uts, &info_write, &info_read)) return CMD_RET_FAILURE; } else { - struct spl_load_info load = { - .bl_len = 1, - .priv = img, - .read = spl_test_read, - }; + struct spl_load_info load; + spl_set_bl_len(&load, 1); + load.priv = img; + load.read = spl_test_read; if (type == IMX8) ut_assertok(spl_load_imx_container(&info_read, &load, 0)); @@ -375,7 +374,7 @@ SPL_IMG_TEST(spl_test_image, FIT_EXTERNAL, 0); * LZMA is too complex to generate on the fly, so let's use some data I put in * the oven^H^H^H^H compressed earlier */ -static const char lzma_compressed[] = { +const char lzma_compressed[] = { 0x5d, 0x00, 0x00, 0x80, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x02, 0x05, 0x55, 0x4e, 0x82, 0xbc, 0xc2, 0x42, 0xf6, 0x88, 0x6c, 0x99, 0xd6, 0x82, 0x48, 0xa6, 0x06, 0x67, 0xf8, 0x46, 0x7c, 0xe9, @@ -611,6 +610,8 @@ static const char lzma_compressed[] = { 0x1e, 0xff, 0xff, 0x80, 0x8e, 0x00, 0x00 }; +const size_t lzma_compressed_size = sizeof(lzma_compressed); + int do_spl_test_load(struct unit_test_state *uts, const char *test_name, enum spl_test_image type, struct spl_image_loader *loader, int (*write_image)(struct unit_test_state *, void *, size_t)) diff --git a/test/image/spl_load_fs.c b/test/image/spl_load_fs.c index 297ab08a820..5f1de5486f4 100644 --- a/test/image/spl_load_fs.c +++ b/test/image/spl_load_fs.c @@ -320,10 +320,11 @@ static int spl_test_mmc_fs(struct unit_test_state *uts, const char *test_name, const char *filename = CONFIG_SPL_FS_LOAD_PAYLOAD_NAME; struct blk_desc *dev_desc; size_t fs_size, fs_data, img_size, img_data, - data_size = SPL_TEST_DATA_SIZE; + plain_size = SPL_TEST_DATA_SIZE; struct spl_image_info info_write = { .name = test_name, - .size = data_size, + .size = type == LEGACY_LZMA ? lzma_compressed_size : + plain_size, }, info_read = { }; struct disk_partition part = { .start = 1, @@ -335,7 +336,7 @@ static int spl_test_mmc_fs(struct unit_test_state *uts, const char *test_name, .boot_device = loader->boot_device, }; void *fs; - char *data; + char *data, *plain; img_size = create_image(NULL, type, &info_write, &img_data); ut_assert(img_size); @@ -345,7 +346,15 @@ static int spl_test_mmc_fs(struct unit_test_state *uts, const char *test_name, ut_assertnonnull(fs); data = fs + fs_data + img_data; - generate_data(data, data_size, test_name); + if (type == LEGACY_LZMA) { + plain = malloc(plain_size); + ut_assertnonnull(plain); + generate_data(plain, plain_size, "lzma"); + memcpy(data, lzma_compressed, lzma_compressed_size); + } else { + plain = data; + generate_data(plain, plain_size, test_name); + } ut_asserteq(img_size, create_image(fs + fs_data, type, &info_write, NULL)); ut_asserteq(fs_size, create_fs(fs, img_size, filename, NULL)); @@ -366,8 +375,12 @@ static int spl_test_mmc_fs(struct unit_test_state *uts, const char *test_name, ut_assertok(loader->load_image(&info_read, &bootdev)); if (check_image_info(uts, &info_write, &info_read)) return CMD_RET_FAILURE; - ut_asserteq_mem(data, phys_to_virt(info_write.load_addr), data_size); + if (type == LEGACY_LZMA) + ut_asserteq(plain_size, info_read.size); + ut_asserteq_mem(plain, phys_to_virt(info_write.load_addr), plain_size); + if (type == LEGACY_LZMA) + free(plain); free(fs); return 0; } @@ -382,6 +395,8 @@ static int spl_test_blk(struct unit_test_state *uts, const char *test_name, return spl_test_mmc_fs(uts, test_name, type, create_ext2, true); } SPL_IMG_TEST(spl_test_blk, LEGACY, DM_FLAGS); +SPL_IMG_TEST(spl_test_blk, LEGACY_LZMA, DM_FLAGS); +SPL_IMG_TEST(spl_test_blk, IMX8, DM_FLAGS); SPL_IMG_TEST(spl_test_blk, FIT_EXTERNAL, DM_FLAGS); SPL_IMG_TEST(spl_test_blk, FIT_INTERNAL, DM_FLAGS); @@ -409,12 +424,10 @@ static int spl_test_mmc(struct unit_test_state *uts, const char *test_name, spl_mmc_clear_cache(); spl_fat_force_reregister(); - if (type == LEGACY && - spl_test_mmc_fs(uts, test_name, type, create_ext2, false)) + if (spl_test_mmc_fs(uts, test_name, type, create_ext2, false)) return CMD_RET_FAILURE; - if (type != IMX8 && - spl_test_mmc_fs(uts, test_name, type, create_fat, false)) + if (spl_test_mmc_fs(uts, test_name, type, create_fat, false)) return CMD_RET_FAILURE; return do_spl_test_load(uts, test_name, type, @@ -423,6 +436,7 @@ static int spl_test_mmc(struct unit_test_state *uts, const char *test_name, spl_test_mmc_write_image); } SPL_IMG_TEST(spl_test_mmc, LEGACY, DM_FLAGS); +SPL_IMG_TEST(spl_test_mmc, LEGACY_LZMA, DM_FLAGS); SPL_IMG_TEST(spl_test_mmc, IMX8, DM_FLAGS); SPL_IMG_TEST(spl_test_mmc, FIT_EXTERNAL, DM_FLAGS); SPL_IMG_TEST(spl_test_mmc, FIT_INTERNAL, DM_FLAGS); diff --git a/test/image/spl_load_nand.c b/test/image/spl_load_nand.c new file mode 100644 index 00000000000..ec242207948 --- /dev/null +++ b/test/image/spl_load_nand.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Sean Anderson <seanga2@gmail.com> + */ + +#include <nand.h> +#include <spl.h> +#include <test/spl.h> +#include <test/ut.h> + +uint32_t spl_nand_get_uboot_raw_page(void); + +static int spl_test_nand_write_image(struct unit_test_state *uts, void *img, + size_t img_size) +{ + uint32_t off = spl_nand_get_uboot_raw_page(); + struct mtd_info *mtd; + struct erase_info erase = { }; + size_t length; + + nand_reinit(); + mtd = get_nand_dev_by_index(0); + ut_assertnonnull(mtd); + + /* Mark the first block as bad to test that it gets skipped */ + ut_assertok(mtd_block_markbad(mtd, off & ~mtd->erasesize_mask)); + off += mtd->erasesize; + + erase.mtd = mtd; + erase.len = img_size + (off & mtd->erasesize_mask); + erase.len += mtd->erasesize_mask; + erase.len &= ~mtd->erasesize_mask; + erase.addr = off & ~mtd->erasesize_mask; + erase.scrub = 1; + ut_assertok(mtd_erase(mtd, &erase)); + + ut_assertok(mtd_write(mtd, off, img_size, &length, img)); + + return 0; +} + +static int spl_test_nand(struct unit_test_state *uts, const char *test_name, + enum spl_test_image type) +{ + return do_spl_test_load(uts, test_name, type, + SPL_LOAD_IMAGE_GET(1, BOOT_DEVICE_NAND, + spl_nand_load_image), + spl_test_nand_write_image); +} +SPL_IMG_TEST(spl_test_nand, LEGACY, DM_FLAGS); +SPL_IMG_TEST(spl_test_nand, LEGACY_LZMA, DM_FLAGS); +SPL_IMG_TEST(spl_test_nand, IMX8, DM_FLAGS); +SPL_IMG_TEST(spl_test_nand, FIT_INTERNAL, DM_FLAGS); +#if !IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL) +SPL_IMG_TEST(spl_test_nand, FIT_EXTERNAL, DM_FLAGS); +#endif diff --git a/test/image/spl_load_net.c b/test/image/spl_load_net.c index f570cef163f..9d067a7a592 100644 --- a/test/image/spl_load_net.c +++ b/test/image/spl_load_net.c @@ -248,5 +248,7 @@ static int spl_test_net(struct unit_test_state *uts, const char *test_name, return ret; } SPL_IMG_TEST(spl_test_net, LEGACY, DM_FLAGS); +SPL_IMG_TEST(spl_test_net, LEGACY_LZMA, DM_FLAGS); +SPL_IMG_TEST(spl_test_net, IMX8, DM_FLAGS); SPL_IMG_TEST(spl_test_net, FIT_INTERNAL, DM_FLAGS); SPL_IMG_TEST(spl_test_net, FIT_EXTERNAL, DM_FLAGS); diff --git a/test/image/spl_load_nor.c b/test/image/spl_load_nor.c index a62bb60d253..de5686343b9 100644 --- a/test/image/spl_load_nor.c +++ b/test/image/spl_load_nor.c @@ -36,4 +36,6 @@ SPL_IMG_TEST(spl_test_nor, LEGACY, 0); SPL_IMG_TEST(spl_test_nor, LEGACY_LZMA, 0); SPL_IMG_TEST(spl_test_nor, IMX8, 0); SPL_IMG_TEST(spl_test_nor, FIT_INTERNAL, 0); +#if !IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL) SPL_IMG_TEST(spl_test_nor, FIT_EXTERNAL, 0); +#endif diff --git a/test/image/spl_load_os.c b/test/image/spl_load_os.c index 49edf152d78..26228a8a4a9 100644 --- a/test/image/spl_load_os.c +++ b/test/image/spl_load_os.c @@ -16,14 +16,13 @@ struct text_ctx { int fd; }; -static ulong read_fit_image(struct spl_load_info *load, ulong sector, - ulong count, void *buf) +static ulong read_fit_image(struct spl_load_info *load, ulong offset, + ulong size, void *buf) { struct text_ctx *text_ctx = load->priv; - off_t offset, ret; + off_t ret; ssize_t res; - offset = sector * load->bl_len; ret = os_lseek(text_ctx->fd, offset, OS_SEEK_SET); if (ret != offset) { printf("Failed to seek to %zx, got %zx (errno=%d)\n", offset, @@ -31,14 +30,14 @@ static ulong read_fit_image(struct spl_load_info *load, ulong sector, return 0; } - res = os_read(text_ctx->fd, buf, count * load->bl_len); + res = os_read(text_ctx->fd, buf, size); if (res == -1) { printf("Failed to read %lx bytes, got %ld (errno=%d)\n", - count * load->bl_len, res, errno); + size, res, errno); return 0; } - return count; + return size; } static int spl_test_load(struct unit_test_state *uts) @@ -52,13 +51,12 @@ static int spl_test_load(struct unit_test_state *uts) int fd; memset(&load, '\0', sizeof(load)); - load.bl_len = 512; + spl_set_bl_len(&load, 512); load.read = read_fit_image; ret = sandbox_find_next_phase(fname, sizeof(fname), true); if (ret) ut_assertf(0, "%s not found, error %d\n", fname, ret); - load.filename = fname; header = spl_get_load_buffer(-sizeof(*header), sizeof(*header)); diff --git a/test/image/spl_load_spi.c b/test/image/spl_load_spi.c index 8f9b6e0139b..54a95465e23 100644 --- a/test/image/spl_load_spi.c +++ b/test/image/spl_load_spi.c @@ -34,6 +34,7 @@ static int spl_test_spi(struct unit_test_state *uts, const char *test_name, spl_test_spi_write_image); } SPL_IMG_TEST(spl_test_spi, LEGACY, DM_FLAGS); +SPL_IMG_TEST(spl_test_spi, LEGACY_LZMA, DM_FLAGS); SPL_IMG_TEST(spl_test_spi, IMX8, DM_FLAGS); SPL_IMG_TEST(spl_test_spi, FIT_INTERNAL, DM_FLAGS); #if !IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL) diff --git a/test/py/tests/test_efi_secboot/test_signed.py b/test/py/tests/test_efi_secboot/test_signed.py index ca52e853d8f..2f862a259ad 100644 --- a/test/py/tests/test_efi_secboot/test_signed.py +++ b/test/py/tests/test_efi_secboot/test_signed.py @@ -29,7 +29,7 @@ class TestEfiSignedImage(object): output = u_boot_console.run_command_list([ 'host bind 0 %s' % disk_img, 'efidebug boot add -b 1 HELLO1 host 0:1 /helloworld.efi.signed -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'bootefi bootmgr']) assert 'Hello, world!' in ''.join(output) @@ -37,7 +37,7 @@ class TestEfiSignedImage(object): # Test Case 1b, run unsigned image if no PK output = u_boot_console.run_command_list([ 'efidebug boot add -b 2 HELLO2 host 0:1 /helloworld.efi -s ""', - 'efidebug boot next 2', + 'efidebug boot order 2', 'bootefi bootmgr']) assert 'Hello, world!' in ''.join(output) @@ -59,13 +59,13 @@ class TestEfiSignedImage(object): assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO1 host 0:1 /helloworld.efi.signed -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert('\'HELLO1\' failed' in ''.join(output)) assert('efi_start_image() returned: 26' in ''.join(output)) output = u_boot_console.run_command_list([ 'efidebug boot add -b 2 HELLO2 host 0:1 /helloworld.efi -s ""', - 'efidebug boot next 2', + 'efidebug boot order 2', 'efidebug test bootmgr']) assert '\'HELLO2\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -77,12 +77,12 @@ class TestEfiSignedImage(object): 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db']) assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 2', + 'efidebug boot order 2', 'efidebug test bootmgr']) assert '\'HELLO2\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'bootefi bootmgr']) assert 'Hello, world!' in ''.join(output) @@ -105,7 +105,7 @@ class TestEfiSignedImage(object): assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi.signed -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -117,7 +117,7 @@ class TestEfiSignedImage(object): 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db']) assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -143,7 +143,7 @@ class TestEfiSignedImage(object): assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi.signed -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -170,7 +170,7 @@ class TestEfiSignedImage(object): assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi.signed_2sigs -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert 'Hello, world!' in ''.join(output) @@ -181,7 +181,7 @@ class TestEfiSignedImage(object): 'setenv -e -nv -bs -rt -at -a -i 4000000:$filesize db']) assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert 'Hello, world!' in ''.join(output) @@ -193,7 +193,7 @@ class TestEfiSignedImage(object): 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx']) assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -205,7 +205,7 @@ class TestEfiSignedImage(object): 'setenv -e -nv -bs -rt -at -a -i 4000000:$filesize dbx']) assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -230,7 +230,7 @@ class TestEfiSignedImage(object): assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi.signed_2sigs -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -254,7 +254,7 @@ class TestEfiSignedImage(object): assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi.signed -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'bootefi bootmgr']) assert 'Hello, world!' in ''.join(output) @@ -265,7 +265,7 @@ class TestEfiSignedImage(object): 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx']) assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -279,7 +279,7 @@ class TestEfiSignedImage(object): 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx']) assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -307,7 +307,7 @@ class TestEfiSignedImage(object): assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi.signed_2sigs -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -330,7 +330,7 @@ class TestEfiSignedImage(object): assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi.signed_2sigs -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -349,7 +349,7 @@ class TestEfiSignedImage(object): output = u_boot_console.run_command_list([ 'host bind 0 %s' % disk_img, 'efidebug boot add -b 1 HELLO1 host 0:1 /helloworld_forged.efi.signed -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert('hELLO, world!' in ''.join(output)) @@ -364,7 +364,7 @@ class TestEfiSignedImage(object): 'setenv -e -nv -bs -rt -at -i 4000000:$filesize PK']) assert 'Failed to set EFI variable' not in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert(not 'hELLO, world!' in ''.join(output)) assert('\'HELLO1\' failed' in ''.join(output)) diff --git a/test/py/tests/test_efi_secboot/test_signed_intca.py b/test/py/tests/test_efi_secboot/test_signed_intca.py index d8d599d22f3..8d9a5f3e7fe 100644 --- a/test/py/tests/test_efi_secboot/test_signed_intca.py +++ b/test/py/tests/test_efi_secboot/test_signed_intca.py @@ -40,7 +40,7 @@ class TestEfiSignedImageIntca(object): output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO_a host 0:1 /helloworld.efi.signed_a -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO_a\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -49,7 +49,7 @@ class TestEfiSignedImageIntca(object): # Test Case 1b, signed and authenticated by root CA output = u_boot_console.run_command_list([ 'efidebug boot add -b 2 HELLO_ab host 0:1 /helloworld.efi.signed_ab -s ""', - 'efidebug boot next 2', + 'efidebug boot order 2', 'bootefi bootmgr']) assert 'Hello, world!' in ''.join(output) @@ -71,7 +71,7 @@ class TestEfiSignedImageIntca(object): output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO_abc host 0:1 /helloworld.efi.signed_abc -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO_abc\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -81,7 +81,7 @@ class TestEfiSignedImageIntca(object): output = u_boot_console.run_command_list([ 'fatload host 0:1 4000000 db_b.auth', 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO_abc\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) @@ -91,7 +91,7 @@ class TestEfiSignedImageIntca(object): output = u_boot_console.run_command_list([ 'fatload host 0:1 4000000 db_c.auth', 'setenv -e -nv -bs -rt -at -i 4000000:$filesize db', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert 'Hello, world!' in ''.join(output) @@ -117,7 +117,7 @@ class TestEfiSignedImageIntca(object): output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO_abc host 0:1 /helloworld.efi.signed_abc -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert 'Hello, world!' in ''.join(output) # Or, @@ -129,7 +129,7 @@ class TestEfiSignedImageIntca(object): output = u_boot_console.run_command_list([ 'fatload host 0:1 4000000 dbx_c.auth', 'setenv -e -nv -bs -rt -at -i 4000000:$filesize dbx', - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert '\'HELLO_abc\' failed' in ''.join(output) assert 'efi_start_image() returned: 26' in ''.join(output) diff --git a/test/py/tests/test_efi_secboot/test_unsigned.py b/test/py/tests/test_efi_secboot/test_unsigned.py index df63f0df081..7c078f220d0 100644 --- a/test/py/tests/test_efi_secboot/test_unsigned.py +++ b/test/py/tests/test_efi_secboot/test_unsigned.py @@ -36,11 +36,11 @@ class TestEfiUnsignedImage(object): output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'bootefi bootmgr']) assert '\'HELLO\' failed' in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert 'efi_start_image() returned: 26' in ''.join(output) assert 'Hello, world!' not in ''.join(output) @@ -65,7 +65,7 @@ class TestEfiUnsignedImage(object): output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'bootefi bootmgr']) assert 'Hello, world!' in ''.join(output) @@ -89,11 +89,11 @@ class TestEfiUnsignedImage(object): output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'bootefi bootmgr']) assert '\'HELLO\' failed' in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert 'efi_start_image() returned: 26' in ''.join(output) assert 'Hello, world!' not in ''.join(output) @@ -107,11 +107,11 @@ class TestEfiUnsignedImage(object): output = u_boot_console.run_command_list([ 'efidebug boot add -b 1 HELLO host 0:1 /helloworld.efi -s ""', - 'efidebug boot next 1', + 'efidebug boot order 1', 'bootefi bootmgr']) assert '\'HELLO\' failed' in ''.join(output) output = u_boot_console.run_command_list([ - 'efidebug boot next 1', + 'efidebug boot order 1', 'efidebug test bootmgr']) assert 'efi_start_image() returned: 26' in ''.join(output) assert 'Hello, world!' not in ''.join(output) diff --git a/test/py/tests/test_fs/test_erofs.py b/test/py/tests/test_fs/test_erofs.py index 458a52ba79d..87ad8f2d5fd 100644 --- a/test/py/tests/test_fs/test_erofs.py +++ b/test/py/tests/test_fs/test_erofs.py @@ -196,6 +196,15 @@ def test_erofs(u_boot_console): """ build_dir = u_boot_console.config.build_dir + # If the EFI subsystem is enabled and initialized, EFI subsystem tries to + # add EFI boot option when the new disk is detected. If there is no EFI + # System Partition exists, EFI subsystem outputs error messages and + # it ends up with test failure. + # Restart U-Boot to clear the previous state. + # TODO: Ideally EFI test cases need to be fixed, but it will + # increase the number of system reset. + u_boot_console.restart_uboot() + try: # setup test environment make_erofs_image(build_dir) diff --git a/test/py/tests/test_fs/test_squashfs/test_sqfs_ls.py b/test/py/tests/test_fs/test_squashfs/test_sqfs_ls.py index 527a556ed80..a20a7d1a663 100644 --- a/test/py/tests/test_fs/test_squashfs/test_sqfs_ls.py +++ b/test/py/tests/test_fs/test_squashfs/test_sqfs_ls.py @@ -118,6 +118,15 @@ def test_sqfs_ls(u_boot_console): """ build_dir = u_boot_console.config.build_dir + # If the EFI subsystem is enabled and initialized, EFI subsystem tries to + # add EFI boot option when the new disk is detected. If there is no EFI + # System Partition exists, EFI subsystem outputs error messages and + # it ends up with test failure. + # Restart U-Boot to clear the previous state. + # TODO: Ideally EFI test cases need to be fixed, but it will + # increase the number of system reset. + u_boot_console.restart_uboot() + # setup test environment check_mksquashfs_version() generate_sqfs_src_dir(build_dir) diff --git a/test/py/tests/test_sandbox_opts.py b/test/py/tests/test_sandbox_opts.py new file mode 100644 index 00000000000..422b43cb3bc --- /dev/null +++ b/test/py/tests/test_sandbox_opts.py @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2022 Google LLC +# Written by Simon Glass <sjg@chromium.org> + +import pytest + +import u_boot_utils as util + +# This is needed for Azure, since the default '..' directory is not writeable +TMPDIR = '/tmp/test_cmdline' + +@pytest.mark.slow +@pytest.mark.boardspec('sandbox') +def test_sandbox_cmdline(u_boot_console): + """Test building sandbox without CONFIG_CMDLINE""" + cons = u_boot_console + + out = util.run_and_log( + cons, ['./tools/buildman/buildman', '-m', '--board', 'sandbox', + '-a', '~CMDLINE', '-o', TMPDIR]) + +@pytest.mark.slow +@pytest.mark.boardspec('sandbox') +def test_sandbox_lto(u_boot_console): + """Test building sandbox without CONFIG_LTO""" + cons = u_boot_console + + out = util.run_and_log( + cons, ['./tools/buildman/buildman', '-m', '--board', 'sandbox', + '-a', '~LTO', '-o', TMPDIR]) diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py index 3e42c987d1c..f35175b4598 100644 --- a/tools/buildman/builder.py +++ b/tools/buildman/builder.py @@ -480,7 +480,7 @@ class Builder: Args: commit: Commit object that is being built brd: Board object that is being built - stage: Stage that we are at (mrproper, config, build) + stage: Stage that we are at (mrproper, config, oldconfig, build) cwd: Directory where make should be run args: Arguments to pass to make kwargs: Arguments to pass to command.run_pipe() diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py index 6a61f64da1d..a8599c0bb2a 100644 --- a/tools/buildman/builderthread.py +++ b/tools/buildman/builderthread.py @@ -426,6 +426,12 @@ class BuilderThread(threading.Thread): # Now do the build, if everything looks OK if result.return_code == 0: + if adjust_cfg: + oldc_args = list(args) + ['oldconfig'] + oldc_result = self.make(commit, brd, 'oldconfig', cwd, + *oldc_args, env=env) + if oldc_result.return_code: + return oldc_result result = self._build(commit, brd, cwd, args, env, cmd_list, config_only) if adjust_cfg: diff --git a/tools/buildman/func_test.py b/tools/buildman/func_test.py index 55dd494fe8e..6b88ed815d6 100644 --- a/tools/buildman/func_test.py +++ b/tools/buildman/func_test.py @@ -439,6 +439,8 @@ class TestFunctional(unittest.TestCase): tools.write_file(fname, b'CONFIG_SOMETHING=1') return command.CommandResult(return_code=0, combined='Test configuration complete') + elif stage == 'oldconfig': + return command.CommandResult(return_code=0) elif stage == 'build': stderr = '' fname = os.path.join(cwd or '', out_dir, 'u-boot') @@ -461,7 +463,7 @@ Some images are invalid''' return command.CommandResult(return_code=0) # Not handled, so abort - print('make', stage) + print('_HandleMake failure: make', stage) sys.exit(1) # Example function to print output lines |