diff options
| -rw-r--r-- | common/spl/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/usb/host/Kconfig | 13 |
2 files changed, 13 insertions, 10 deletions
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 2c042ad3066..03d0fd90e09 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1345,16 +1345,6 @@ config SPL_THERMAL automatic power-off when the temperature gets too high or low. Other devices may be discrete but connected on a suitable bus. -config SPL_USB_HOST - bool "Support USB host drivers" - help - Enable access to USB (Universal Serial Bus) host devices so that - SPL can load U-Boot from a connected USB peripheral, such as a USB - flash stick. While USB takes a little longer to start up than most - buses, it is very flexible since many different types of storage - device can be attached. This option enables the drivers in - drivers/usb/host as part of an SPL build. - config SPL_USB_STORAGE bool "Support loading from USB" depends on SPL_USB_HOST diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 6213b3c95fa..1a883babf4c 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -6,6 +6,19 @@ comment "USB Host Controller Drivers" config USB_HOST bool select DM_USB + help + Enable access to USB (Universal Serial Bus) host devices so that + SPL can load U-Boot from a connected USB peripheral, such as a USB + flash stick. While USB takes a little longer to start up than most + buses, it is very flexible since many different types of storage + device can be attached. + +config SPL_USB_HOST + bool "Support USB host drivers" + depends on SPL + help + For detailed help see USB_HOST Kconfig symbol. This option enables + the drivers in drivers/usb/host as part of an SPL build. config USB_XHCI_HCD bool "xHCI HCD (USB 3.0) support" |