2734 files changed, 85513 insertions, 19608 deletions

diff --git a/Kconfig b/Kconfig
index ab46b27999c..74e8ce5edfd 100644
--- a/Kconfig
+++ b/Kconfig
@@ -208,7 +208,7 @@ config ENV_VARS_UBOOT_CONFIG
 
 config NR_DRAM_BANKS
 	int "Number of DRAM banks"
-	default 1 if ARCH_SUNXI || ARCH_OWL
+	default 1 if ARCH_SC5XX || ARCH_SUNXI || ARCH_OWL
 	default 2 if OMAP34XX
 	default 4
 	help
@@ -551,6 +551,7 @@ config SYS_LOAD_ADDR
 	default 0x12000000 if ARCH_MX6 && !(MX6SL || MX6SLL  || MX6SX || MX6UL || MX6ULL)
 	default 0x80800000 if ARCH_MX7
 	default 0x90000000 if FSL_LSCH2 || FSL_LSCH3
+	default 0x0 if ARCH_SC5XX
 	help
 	  Address in memory to use as the default safe load address.
 
@@ -651,6 +652,11 @@ config TEXT_BASE
 	default 0x2a000000 if MACH_SUN9I
 	default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
 	default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
+	default 0x96000000 if ARCH_SC5XX && SC59X_64
+	default 0xB2200000 if ARCH_SC5XX && SC59X
+	default 0x89200000 if ARCH_SC5XX && TARGET_SC584_EZKIT
+	default 0xC2200000 if ARCH_SC5XX && (TARGET_SC589_EZKIT || TARGET_SC589_MINI)
+	default 0x82200000 if ARCH_SC5XX && SC57X
 	hex "Text Base"
 	help
 	  The address in memory that U-Boot will be copied and executed from
diff --git a/MAINTAINERS b/MAINTAINERS
index 7ab39d91a55..7aefda93d01 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -601,13 +601,20 @@ M:	Ian Roberts <ian.roberts@timesys.com>
 M:	Vasileios Bimpikas <vasileios.bimpikas@analog.com>
 M:	Utsav Agarwal <utsav.agarwal@analog.com>
 M:	Arturs Artamonovs <arturs.artamonovs@analog.com>
+L:	adsp-linux@analog.com
 S:	Supported
 T:	git https://github.com/analogdevicesinc/lnxdsp-u-boot
+F:	arch/arm/dts/sc5*
 F:	arch/arm/include/asm/arch-adi/
 F:	arch/arm/mach-sc5xx/
+F:	board/adi/
+F:	doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml
+F:	doc/device-tree-bindings/clock/adi,sc5xx-clocks.yaml
+F:	doc/device-tree-bindings/timer/adi,sc5xx-gptimer.yaml
 F:	drivers/clk/adi/
 F:	drivers/serial/serial_adi_uart4.c
 F:	drivers/timer/adi_sc5xx_timer.c
+F:	include/configs/sc5*
 F:	include/env/adi/
 
 ARM SNAPDRAGON
diff --git a/Makefile b/Makefile
index 525576f987d..da32324647b 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
 VERSION = 2024
 PATCHLEVEL = 10
 SUBLEVEL =
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -1367,7 +1367,17 @@ u-boot.ldr:	u-boot
 # ---------------------------------------------------------------------------
 # Use 'make BINMAN_DEBUG=1' to enable debugging
 # Use 'make BINMAN_VERBOSE=3' to set vebosity level
+
+ifneq ($(EXT_DTB),)
+ext_dtb_list := $(basename $(notdir $(EXT_DTB)))
+default_dt := $(firstword $(ext_dtb_list))
+of_list := "$(ext_dtb_list)"
+of_list_dirs := $(dir $(EXT_DTB))
+else
+of_list := $(CONFIG_OF_LIST)
+of_list_dirs := $(dt_dir)
 default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
+endif
 
 quiet_cmd_binman = BINMAN  $@
 cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
@@ -1377,7 +1387,7 @@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
 		build -u -d u-boot.dtb -O . -m \
 		--allow-missing $(if $(BINMAN_ALLOW_MISSING),--ignore-missing) \
 		-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
-		-I $(dt_dir) -a of-list=$(CONFIG_OF_LIST) \
+		$(foreach f,$(of_list_dirs),-I $(f)) -a of-list=$(of_list) \
 		$(foreach f,$(BINMAN_INDIRS),-I $(f)) \
 		-a atf-bl31-path=${BL31} \
 		-a tee-os-path=${TEE} \
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 656f588a97c..060636e9e2d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1868,6 +1868,20 @@ config TARGET_LS1046AFRWY
 
 config ARCH_SC5XX
 	bool "Analog Devices SC5XX-processor family"
+	select ADI_SC5XX_TIMER
+	select DM
+	select DM_SERIAL
+	select HAS_CUSTOM_SYS_INIT_SP_ADDR
+	select PANIC_HANG
+	select SPL
+	select SPL_BOOTROM_SUPPORT
+	select SPL_DM
+	select SPL_DM_SEQ_ALIAS
+	select SPL_LIBGENERIC_SUPPORT
+	select SPL_LIBCOMMON_SUPPORT
+	select SPL_SKIP_LOWLEVEL_INIT
+	select SUPPORT_SPL
+	select TIMER
 
 config TARGET_SL28
 	bool "Support sl28"
diff --git a/arch/arm/cpu/armv8/u-boot-spl.lds b/arch/arm/cpu/armv8/u-boot-spl.lds
index 215cedd69a8..fed69644b55 100644
--- a/arch/arm/cpu/armv8/u-boot-spl.lds
+++ b/arch/arm/cpu/armv8/u-boot-spl.lds
@@ -13,8 +13,10 @@
 
 MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,
 		LENGTH = IMAGE_MAX_SIZE }
+#ifdef CONFIG_SPL_SEPARATE_BSS
 MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR,
 		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+#endif
 
 OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
 OUTPUT_ARCH(aarch64)
@@ -56,12 +58,22 @@ SECTIONS
 	_end = .;
 	_image_binary_end = .;
 
+#ifdef CONFIG_SPL_SEPARATE_BSS
 	.bss : {
 		__bss_start = .;
 		*(.bss*)
 		. = ALIGN(8);
 		__bss_end = .;
 	} >.sdram
+#else
+	.bss (NOLOAD) : {
+		__bss_start = .;
+		*(.bss*)
+		 . = ALIGN(8);
+		__bss_end = .;
+	} >.sram
+#endif
+	__bss_size = __bss_end - __bss_start;
 
 	/DISCARD/ : { *(.rela*) }
 	/DISCARD/ : { *(.dynsym) }
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 05a00e44358..65176c8fb83 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -262,11 +262,6 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
 	zynqmp-m-a2197-02-revA.dtb		\
 	zynqmp-m-a2197-03-revA.dtb		\
 	zynqmp-p-a2197-00-revA.dtb		\
-	zynqmp-p-a2197-00-revA-x-prc-01-revA.dtbo	\
-	zynqmp-p-a2197-00-revA-x-prc-02-revA.dtbo	\
-	zynqmp-p-a2197-00-revA-x-prc-03-revA.dtbo	\
-	zynqmp-p-a2197-00-revA-x-prc-04-revA.dtbo	\
-	zynqmp-p-a2197-00-revA-x-prc-05-revA.dtbo	\
 	zynqmp-mini.dtb				\
 	zynqmp-mini-emmc0.dtb			\
 	zynqmp-mini-emmc1.dtb			\
@@ -281,22 +276,10 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
 	zynqmp-mini-qspi-x2-stacked.dtb		\
 	zynqmp-sc-revB.dtb			\
 	zynqmp-sc-revC.dtb			\
-	zynqmp-sc-vek280-revA.dtbo		\
-	zynqmp-sc-vek280-revB.dtbo		\
-	zynqmp-sc-vhk158-revA.dtbo		\
-	zynqmp-sc-vpk120-revB.dtbo		\
-	zynqmp-sc-vpk180-revA.dtbo		\
-	zynqmp-sc-vpk180-revB.dtbo		\
-	zynqmp-sc-vn-p-b2197-00-revA.dtbo	\
 	zynqmp-sm-k24-revA.dtb			\
 	zynqmp-smk-k24-revA.dtb			\
 	zynqmp-sm-k26-revA.dtb			\
 	zynqmp-smk-k26-revA.dtb			\
-	zynqmp-sck-kd-g-revA.dtbo		\
-	zynqmp-sck-kr-g-revA.dtbo		\
-	zynqmp-sck-kr-g-revB.dtbo		\
-	zynqmp-sck-kv-g-revA.dtbo		\
-	zynqmp-sck-kv-g-revB.dtbo		\
 	zynqmp-topic-miamimp-xilinx-xdp-v1r1.dtb	\
 	zynqmp-vpk120-revA.dtb			\
 	zynqmp-vp-x-a2785-00-revA.dtb		\
@@ -324,6 +307,67 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
 	zynqmp-zc1751-xm017-dc3.dtb		\
 	zynqmp-zc1751-xm018-dc4.dtb		\
 	zynqmp-zc1751-xm019-dc5.dtb
+
+zynqmp-p-a2197-00-revA-x-prc-01-revA-dtbs := zynqmp-p-a2197-00-revA.dtb zynqmp-p-a2197-00-revA-x-prc-01-revA.dtbo
+zynqmp-p-a2197-00-revA-x-prc-02-revA-dtbs := zynqmp-p-a2197-00-revA.dtb zynqmp-p-a2197-00-revA-x-prc-02-revA.dtbo
+zynqmp-p-a2197-00-revA-x-prc-03-revA-dtbs := zynqmp-p-a2197-00-revA.dtb zynqmp-p-a2197-00-revA-x-prc-03-revA.dtbo
+zynqmp-p-a2197-00-revA-x-prc-04-revA-dtbs := zynqmp-p-a2197-00-revA.dtb zynqmp-p-a2197-00-revA-x-prc-04-revA.dtbo
+zynqmp-p-a2197-00-revA-x-prc-05-revA-dtbs := zynqmp-p-a2197-00-revA.dtb zynqmp-p-a2197-00-revA-x-prc-05-revA.dtbo
+
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-01-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-02-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-03-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-04-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-05-revA.dtb
+
+zynqmp-sc-vek280-revA-dtbs := zynqmp-sc-revB.dtb zynqmp-sc-vek280-revA.dtbo
+zynqmp-sc-vek280-revB-dtbs := zynqmp-sc-revC.dtb zynqmp-sc-vek280-revB.dtbo
+zynqmp-sc-vhk158-revA-dtbs := zynqmp-sc-revB.dtb zynqmp-sc-vhk158-revA.dtbo
+zynqmp-sc-vpk120-revB-dtbs := zynqmp-sc-revB.dtb zynqmp-sc-vpk120-revB.dtbo
+zynqmp-sc-vpk180-revA-dtbs := zynqmp-sc-revB.dtb zynqmp-sc-vpk180-revA.dtbo
+zynqmp-sc-vpk180-revB-dtbs := zynqmp-sc-revB.dtb zynqmp-sc-vpk180-revB.dtbo
+zynqmp-sc-vn-p-b2197-00-revA-dtbs := zynqmp-sc-revB.dtb zynqmp-sc-vn-p-b2197-00-revA.dtbo
+
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sc-vek280-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sc-vek280-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sc-vhk158-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sc-vpk120-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sc-vpk180-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sc-vpk180-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sc-vn-p-b2197-00-revA.dtb
+
+zynqmp-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+zynqmp-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+
+zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
+zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
+zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+
+zynqmp-sm-k24-revA-sck-kd-g-revA-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kd-g-revA.dtbo
+zynqmp-smk-k24-revA-sck-kd-g-revA-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kd-g-revA.dtbo
+zynqmp-sm-k24-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+zynqmp-smk-k24-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+zynqmp-sm-k24-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+zynqmp-smk-k24-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kr-g-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kr-g-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kr-g-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kr-g-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kd-g-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kd-g-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kv-g-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kv-g-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kr-g-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kr-g-revB.dtb
+
 dtb-$(CONFIG_ARCH_VERSAL) += \
 	versal-mini.dtb \
 	versal-mini-emmc0.dtb \
@@ -924,9 +968,11 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mp-dhcom-som-overlay-eth2xfast.dtbo \
 	imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo \
 	imx8mp-debix-model-a.dtb \
+	imx8mp-dhcom-drc02.dtb \
 	imx8mp-dhcom-pdk2.dtb \
 	imx8mp-dhcom-pdk3.dtb \
 	imx8mp-dhcom-pdk3-overlay-rev100.dtbo \
+	imx8mp-dhcom-picoitx.dtb \
 	imx8mp-icore-mx8mp-edimm2.2.dtb \
 	imx8mp-msc-sm2s.dtb \
 	imx8mq-pico-pi.dtb \
@@ -1246,6 +1292,15 @@ dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE_OPTEE) += imx8mm-cl-iot-gate-optee.dtb \
 					imx8mm-cl-iot-gate-ied-tpm0.dtbo \
 					imx8mm-cl-iot-gate-ied-tpm1.dtbo
 
+dtb-$(CONFIG_TARGET_SC573_EZKIT) += sc573-ezkit.dtb
+dtb-$(CONFIG_TARGET_SC584_EZKIT) += sc584-ezkit.dtb
+dtb-$(CONFIG_TARGET_SC589_MINI) += sc589-mini.dtb
+dtb-$(CONFIG_TARGET_SC589_EZKIT) += sc589-ezkit.dtb
+dtb-$(CONFIG_TARGET_SC594_SOM_EZKIT) += sc594-som-ezkit.dtb
+dtb-$(CONFIG_TARGET_SC594_SOM_EZLITE) += sc594-som-ezlite.dtb
+dtb-$(CONFIG_TARGET_SC598_SOM_EZKIT) += sc598-som-ezkit.dtb
+dtb-$(CONFIG_TARGET_SC598_SOM_EZLITE) += sc598-som-ezlite.dtb
+
 ifneq ($(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)$(CONFIG_TARGET_IMX8MP_RSB3720A1_6G),)
 dtb-y += imx8mp-rsb3720-a1.dtb
 endif
diff --git a/arch/arm/dts/imx8mm-cl-iot-gate.dts b/arch/arm/dts/imx8mm-cl-iot-gate.dts
index 425701204a0..aa6ca070bff 100644
--- a/arch/arm/dts/imx8mm-cl-iot-gate.dts
+++ b/arch/arm/dts/imx8mm-cl-iot-gate.dts
@@ -350,6 +350,7 @@
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	bus-width = <8>;
 	non-removable;
+	no-mmc-hs400;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index c02e11def5f..d31bc822532 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -122,6 +122,7 @@
 
 			binman_imx_fit: fit {
 				description = "Configuration to load ATF before U-Boot";
+				filename = "u-boot.itb";
 #ifndef CONFIG_IMX_HAB
 				fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
 #endif
diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi
index 732191f5205..6875c6d44ff 100644
--- a/arch/arm/dts/imx8mn-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-u-boot.dtsi
@@ -193,6 +193,7 @@
 
 			binman_imx_fit: fit {
 				description = "Configuration to load ATF before U-Boot";
+				filename = "u-boot.itb";
 #ifndef CONFIG_IMX_HAB
 				fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
 #endif
diff --git a/arch/arm/dts/imx8mp-dhcom-drc02-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-drc02-u-boot.dtsi
new file mode 100644
index 00000000000..8a23b117d9a
--- /dev/null
+++ b/arch/arm/dts/imx8mp-dhcom-drc02-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx8mp-dhcom-u-boot.dtsi"
diff --git a/arch/arm/dts/imx8mp-dhcom-drc02.dts b/arch/arm/dts/imx8mp-dhcom-drc02.dts
new file mode 100644
index 00000000000..b3ab6e94508
--- /dev/null
+++ b/arch/arm/dts/imx8mp-dhcom-drc02.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R204-F1638-SPI16-E2-CAN2-RTC-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * DRC02 PCB number: 568-100 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM on DRC02";
+	compatible = "dh,imx8mp-dhcom-drc02", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-0 = <&pinctrl_eqos_rmii>;
+	phy-handle = <&ethphy0f>;
+	phy-mode = "rmii";
+
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <0>, <100000000>, <50000000>;
+};
+
+&ethphy0g {	/* Micrel KSZ9131RNXI */
+	status = "disabled";
+};
+
+&ethphy0f {	/* SMSC LAN8740Ai */
+	status = "okay";
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rmii>;
+	phy-handle = <&ethphy1f>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <0>, <100000000>, <50000000>, <0>;
+};
+
+&ethphy1f {	/* SMSC LAN8740Ai */
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"DRC02-In1", "", "", "", "", "DHCOM-I", "DRC02-HW2", "DRC02-HW0",
+		"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX8 UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <13 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"DHCOM-O", "DHCOM-N", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "", "DRC02-In2", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "SOM-HW0", "",
+		"", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1",
+		"SOM-MEM2", "SOM-HW2", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "DRC02-Out2", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "DHCOM-C", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "DHCOM-E", "DRC02-Out1",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c3 {
+	/* Resistive touch controller not populated on this one SoM variant. */
+	touchscreen@49 {
+		status = "disabled";
+	};
+};
+
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+/* Console UART */
+&pinctrl_uart1 {
+	fsl,pins = <
+		/* No pull-ups on DRC02, enable in-SoC pull-ups */
+		MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x149
+		MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX		0x149
+	>;
+};
+
+&pinctrl_uart3 {
+	fsl,pins = <
+		/* No pull-ups on DRC02, enable in-SoC pull-ups */
+		MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x149
+		MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x149
+	>;
+};
+
+&uart1 {
+	/*
+	 * Due to the use of CAN2 the signals for CAN2 Tx and Rx are routed to
+	 * DHCOM UART1 RTS/CTS pins. Therefore this UART have to use DHCOM GPIOs
+	 * for RTS/CTS. So configure DHCOM GPIO I as RTS and GPIO M as CTS.
+	 */
+	/delete-property/ uart-has-rtscts;
+	cts-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; /* GPIO M */
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_dhcom_i &pinctrl_dhcom_m>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&uart3 {
+	/*
+	 * On DRC02 this UART is used as RS485 interface and RS485_TX_En is
+	 * controlled by DHCOM GPIO P. So remove RTS/CTS pins and the property
+	 * uart-has-rtscts from this UART and add the DHCOM GPIO P pin via
+	 * rts-gpios. The RS485_RX_En is controlled by DHCOM GPIO Q, see gpio1
+	 * node above.
+	 */
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_dhcom_p &pinctrl_dhcom_q>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&uart2 {
+	bluetooth {
+		status = "disabled";
+	};
+};
+
+/* USB_OTG port is not routed out on DRC02. */
+&usb3_0 {
+	status = "disabled";
+};
+
+&usb_dwc3_0 {
+	status = "disabled";
+};
+
+/* USB_HOST port has USB Hub connected to it, PWR/OC pins are unused */
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&usdhc1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	/*
+	 * GPIO I is connected to UART1_RTS
+	 * GPIO M is connected to UART1_CTS
+	 * GPIO P is connected to RS485_TX_En
+	 * GPIO Q is connected to RS485_RX_En
+	 */
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_j
+		     &pinctrl_dhcom_k &pinctrl_dhcom_l &pinctrl_dhcom_n
+		     &pinctrl_dhcom_o &pinctrl_dhcom_r &pinctrl_dhcom_s
+		     &pinctrl_dhcom_int>;
+};
diff --git a/arch/arm/dts/imx8mp-dhcom-picoitx-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-picoitx-u-boot.dtsi
new file mode 100644
index 00000000000..4e95cd0e483
--- /dev/null
+++ b/arch/arm/dts/imx8mp-dhcom-picoitx-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023-2024 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx8mp-dhcom-u-boot.dtsi"
diff --git a/arch/arm/dts/imx8mp-dhcom-picoitx.dts b/arch/arm/dts/imx8mp-dhcom-picoitx.dts
new file mode 100644
index 00000000000..285aaa5b6c0
--- /dev/null
+++ b/arch/arm/dts/imx8mp-dhcom-picoitx.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023-2024 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R204-F1638-SPI16-E-SD-RTC-T-RGB-I-01D2
+ * DHCOM PCB number: 660-200 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM PicoITX";
+	compatible = "dh,imx8mp-dhcom-picoitx", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-0 = <&pinctrl_eqos_rmii>;
+	phy-handle = <&ethphy0f>;
+	phy-mode = "rmii";
+
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+				 <&clk IMX8MP_SYS_PLL2_100M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	assigned-clock-rates = <0>, <100000000>, <50000000>;
+};
+
+&ethphy0g {	/* Micrel KSZ9131RNXI */
+	status = "disabled";
+};
+
+&ethphy0f {	/* SMSC LAN8740Ai */
+	status = "okay";
+};
+
+&fec {
+	status = "disabled";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"DHCOM-G", "", "", "",
+		"", "DHCOM-I", "PicoITX-HW0", "PicoITX-HW2",
+		"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "PicoITX-HW1", "", "", "", "",
+		"", "", "", "", "DHCOM-INT", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "PicoITX-Out2", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "PicoITX-In2", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "",
+		"", "", "PicoITX-In1", "PicoITX-Out1",
+		"", "", "", "", "", "", "", "";
+};
+
+/* No HS connector on this SoM variant, so no HDMI, PCIe and only USB HS. */
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&uart2 {
+	bluetooth {
+		status = "disabled";
+	};
+};
+
+/* USB_OTG port is not routed out on PicoITX. */
+&usb3_0 {
+	status = "disabled";
+};
+
+&usb_dwc3_0 {
+	status = "disabled";
+};
+
+&usb3_1 {
+	fsl,over-current-active-low;
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+};
+
+/* No WiFi/BT chipset on this SoM variant. */
+&usdhc1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	/*
+	 * The following DHCOM GPIOs are used on this board.
+	 * Therefore, they have been removed from the list below.
+	 * I: yellow led
+	 */
+	pinctrl-0 = <&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_j
+		     &pinctrl_dhcom_k &pinctrl_dhcom_l &pinctrl_dhcom_m
+		     &pinctrl_dhcom_n &pinctrl_dhcom_o &pinctrl_dhcom_p
+		     &pinctrl_dhcom_q &pinctrl_dhcom_r &pinctrl_dhcom_s
+		     &pinctrl_dhcom_int>;
+};
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
index f2655a4d0c8..56749ccacd2 100644
--- a/arch/arm/dts/imx8mp-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-u-boot.dtsi
@@ -148,6 +148,7 @@
 
 			binman_imx_fit: fit {
 				description = "Configuration to load ATF before U-Boot";
+				filename = "u-boot.itb";
 #ifndef CONFIG_IMX_HAB
 				fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
 #endif
diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi
index 9b895a63857..d7a83a78f4d 100644
--- a/arch/arm/dts/imx8mq-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-u-boot.dtsi
@@ -106,6 +106,7 @@
 
 			binman_imx_fit: fit {
 				description = "Configuration to load ATF before U-Boot";
+				filename = "u-boot.itb";
 #ifndef CONFIG_IMX_HAB
 				fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
 #endif
diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
index 94760c78dd3..fac108ce14b 100644
--- a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
@@ -102,3 +102,8 @@
 &mcu_udmap {
     ti,sci = <&dm_tifs>;
 };
+
+&wkup_vtm0 {
+	vdd-supply-2 = <&buckb1>;
+	bootph-pre-ram;
+};
diff --git a/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi b/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi
index 884f44239e1..27851b7d083 100644
--- a/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi
@@ -64,6 +64,10 @@
 	bootph-all;
 };
 
+&chipid {
+	bootph-all;
+};
+
 &mcu_ringacc {
 	reg = <0x0 0x2b800000 0x0 0x400000>,
 		<0x0 0x2b000000 0x0 0x400000>,
diff --git a/arch/arm/dts/sc573-ezkit.dts b/arch/arm/dts/sc573-ezkit.dts
new file mode 100644
index 00000000000..0dc2962618c
--- /dev/null
+++ b/arch/arm/dts/sc573-ezkit.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc57x.dtsi"
+
+/ {
+	model = "ADI SC573-EZKIT";
+	compatible = "adi,sc573-ezkit", "adi,sc57x";
+};
diff --git a/arch/arm/dts/sc57x.dtsi b/arch/arm/dts/sc57x.dtsi
new file mode 100644
index 00000000000..ddfcae8d190
--- /dev/null
+++ b/arch/arm/dts/sc57x.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include "sc5xx.dtsi"
+
+/ {
+	gic: interrupt-controller@310b2000 {
+		compatible = "arm,cortex-a5-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x310B2000 0x1000>,
+		      <0x310B4000 0x100>;
+	};
+};
+
+&timer0 {
+	clocks = <&clk ADSP_SC57X_CLK_CGU0_SCLK0>;
+};
diff --git a/arch/arm/dts/sc584-ezkit.dts b/arch/arm/dts/sc584-ezkit.dts
new file mode 100644
index 00000000000..4ec6bcfb658
--- /dev/null
+++ b/arch/arm/dts/sc584-ezkit.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc58x.dtsi"
+
+/ {
+	model = "ADI SC584-EZKIT";
+	compatible = "adi,sc584-ezkit", "adi,sc58x";
+};
diff --git a/arch/arm/dts/sc589-ezkit.dts b/arch/arm/dts/sc589-ezkit.dts
new file mode 100644
index 00000000000..8a1c0ce0862
--- /dev/null
+++ b/arch/arm/dts/sc589-ezkit.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc58x.dtsi"
+
+/ {
+	model = "ADI SC589-EZKIT";
+	compatible = "adi,sc589-ezkit", "adi,sc58x";
+};
diff --git a/arch/arm/dts/sc589-mini.dts b/arch/arm/dts/sc589-mini.dts
new file mode 100644
index 00000000000..605f7a17bfc
--- /dev/null
+++ b/arch/arm/dts/sc589-mini.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc58x.dtsi"
+
+/ {
+	model = "ADI SC598-MINI";
+	compatible = "adi,sc589-mini", "adi,sc58x";
+};
diff --git a/arch/arm/dts/sc58x.dtsi b/arch/arm/dts/sc58x.dtsi
new file mode 100644
index 00000000000..66145315ab7
--- /dev/null
+++ b/arch/arm/dts/sc58x.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include "sc5xx.dtsi"
+
+/ {
+	gic: interrupt-controller@310b2000 {
+		compatible = "arm,cortex-a5-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x310B2000 0x1000>,
+		      <0x310B4000 0x100>;
+	};
+};
+
+&timer0 {
+	reg = <0x31001004 0x100>,
+	      <0x31001060 0x100>;
+	clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
+};
diff --git a/arch/arm/dts/sc594-som-ezkit.dts b/arch/arm/dts/sc594-som-ezkit.dts
new file mode 100644
index 00000000000..e744a3a4edb
--- /dev/null
+++ b/arch/arm/dts/sc594-som-ezkit.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc594-som.dtsi"
+
+/ {
+	model = "ADI SC594-SOM-EZKIT";
+	compatible = "adi,sc594-som-ezkit", "adi,sc59x";
+};
diff --git a/arch/arm/dts/sc594-som-ezlite.dts b/arch/arm/dts/sc594-som-ezlite.dts
new file mode 100644
index 00000000000..7d81b40fe8a
--- /dev/null
+++ b/arch/arm/dts/sc594-som-ezlite.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc594-som.dtsi"
+
+/ {
+	model = "ADI SC594-SOM-EZLITE";
+	compatible = "adi,sc594-som-ezlite", "adi,sc59x";
+};
diff --git a/arch/arm/dts/sc594-som.dtsi b/arch/arm/dts/sc594-som.dtsi
new file mode 100644
index 00000000000..e15473f8e8f
--- /dev/null
+++ b/arch/arm/dts/sc594-som.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc5xx.dtsi"
+
+&timer0 {
+	clocks = <&clk ADSP_SC594_CLK_CGU0_SCLK0>;
+};
+
+&clk {
+	compatible = "adi,sc594-clocks";
+	reg = <0x3108d000 0x1000>,
+	      <0x3108e000 0x1000>,
+	      <0x3108f000 0x1000>;
+};
diff --git a/arch/arm/dts/sc598-som-ezkit.dts b/arch/arm/dts/sc598-som-ezkit.dts
new file mode 100644
index 00000000000..7289e4d1d54
--- /dev/null
+++ b/arch/arm/dts/sc598-som-ezkit.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc598-som.dtsi"
+
+/ {
+	model = "ADI SC598-SOM-EZKIT";
+	compatible = "adi,sc598-som-ezkit", "adi,sc59x-64";
+};
diff --git a/arch/arm/dts/sc598-som-ezlite.dts b/arch/arm/dts/sc598-som-ezlite.dts
new file mode 100644
index 00000000000..fa23b30f86e
--- /dev/null
+++ b/arch/arm/dts/sc598-som-ezlite.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc598-som.dtsi"
+
+/ {
+	model = "ADI SC598-SOM-EZLITE";
+	compatible = "adi,sc598-som-ezlite", "adi,sc59x-64";
+};
diff --git a/arch/arm/dts/sc598-som.dtsi b/arch/arm/dts/sc598-som.dtsi
new file mode 100644
index 00000000000..8bcc8bb8f1c
--- /dev/null
+++ b/arch/arm/dts/sc598-som.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "sc5xx.dtsi"
+
+/ {
+	gic: interrupt-controller@31200000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x31200000 0x40000>, /* GIC Dist */
+		      <0x31240000 0x40000>; /* GICR */
+	};
+};
+
+&clk {
+	compatible = "adi,sc598-clocks";
+	reg = <0x3108d000 0x1000>,
+	      <0x3108e000 0x1000>,
+	      <0x3108f000 0x1000>,
+	      <0x310a9000 0x1000>;
+	reg-names = "cgu0", "cgu1", "cdu", "pll3";
+};
+
+&timer0 {
+	clocks = <&clk ADSP_SC598_CLK_CGU0_SCLK0>;
+};
diff --git a/arch/arm/dts/sc5xx.dtsi b/arch/arm/dts/sc5xx.dtsi
new file mode 100644
index 00000000000..3f440dac29f
--- /dev/null
+++ b/arch/arm/dts/sc5xx.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/adi-sc5xx-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		sys_clkin0: sys_clkin0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+			bootph-all;
+		};
+
+		sys_clkin1: sys_clkin1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+			bootph-all;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		ranges;
+		bootph-all;
+
+		timer0: timer@31018000 {
+			compatible = "adi,sc5xx-gptimer";
+			reg = <0x31018004 0x100>,
+			      <0x31018060 0x100>;
+			status = "okay";
+			bootph-all;
+		};
+
+		clk: clocks@3108d000 {
+			reg = <0x3108d000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&sys_clkin0>, <&sys_clkin1>;
+			clock-names = "sys_clkin0", "sys_clkin1";
+			status = "okay";
+			bootph-all;
+		};
+	};
+};
diff --git a/arch/arm/dts/versal-mini-emmc0.dts b/arch/arm/dts/versal-mini-emmc0.dts
index 60b1c0e1fc4..b98ed16bc5f 100644
--- a/arch/arm/dts/versal-mini-emmc0.dts
+++ b/arch/arm/dts/versal-mini-emmc0.dts
@@ -28,7 +28,7 @@
 		bootph-all;
 	};
 
-	amba: amba {
+	amba: axi {
 		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <0x2>;
diff --git a/arch/arm/dts/versal-mini-emmc1.dts b/arch/arm/dts/versal-mini-emmc1.dts
index 751cc38ee5c..e6a5c2b699e 100644
--- a/arch/arm/dts/versal-mini-emmc1.dts
+++ b/arch/arm/dts/versal-mini-emmc1.dts
@@ -28,7 +28,7 @@
 		bootph-all;
 	};
 
-	amba: amba {
+	amba: axi {
 		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <0x2>;
diff --git a/arch/arm/dts/versal-mini-ospi.dtsi b/arch/arm/dts/versal-mini-ospi.dtsi
index 8735292a127..9ca0cf3c027 100644
--- a/arch/arm/dts/versal-mini-ospi.dtsi
+++ b/arch/arm/dts/versal-mini-ospi.dtsi
@@ -28,7 +28,7 @@
 		bootph-all;
 	};
 
-	amba: amba {
+	amba: axi {
 		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <0x2>;
diff --git a/arch/arm/dts/versal-mini-qspi.dtsi b/arch/arm/dts/versal-mini-qspi.dtsi
index 9347ea32c9c..57427e099f9 100644
--- a/arch/arm/dts/versal-mini-qspi.dtsi
+++ b/arch/arm/dts/versal-mini-qspi.dtsi
@@ -28,7 +28,7 @@
 		bootph-all;
 	};
 
-	amba: amba {
+	amba: axi {
 		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <0x2>;
diff --git a/arch/arm/dts/zynq-cse-nand.dts b/arch/arm/dts/zynq-cse-nand.dts
index 18f627f3d72..f1fb15902a7 100644
--- a/arch/arm/dts/zynq-cse-nand.dts
+++ b/arch/arm/dts/zynq-cse-nand.dts
@@ -31,7 +31,7 @@
 		bootph-all;
 	};
 
-	amba: amba {
+	amba: axi {
 		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/arch/arm/dts/zynq-cse-nor.dts b/arch/arm/dts/zynq-cse-nor.dts
index a5c8a0813ff..8e60d17b944 100644
--- a/arch/arm/dts/zynq-cse-nor.dts
+++ b/arch/arm/dts/zynq-cse-nor.dts
@@ -31,7 +31,7 @@
 		bootph-all;
 	};
 
-	amba: amba {
+	amba: axi {
 		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/arch/arm/dts/zynq-cse-qspi.dtsi b/arch/arm/dts/zynq-cse-qspi.dtsi
index 2e4afafebf5..3b7e6c79874 100644
--- a/arch/arm/dts/zynq-cse-qspi.dtsi
+++ b/arch/arm/dts/zynq-cse-qspi.dtsi
@@ -32,7 +32,7 @@
 		bootph-all;
 	};
 
-	amba: amba {
+	amba: axi {
 		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/arch/arm/dts/zynqmp-dlc21-revA.dts b/arch/arm/dts/zynqmp-dlc21-revA.dts
index 2076271ac99..293d8e97b63 100644
--- a/arch/arm/dts/zynqmp-dlc21-revA.dts
+++ b/arch/arm/dts/zynqmp-dlc21-revA.dts
@@ -87,7 +87,6 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii"; /* DTG generates this properly  1512 */
-	is-internal-pcspma;
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -118,7 +117,7 @@
 		  "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
 		  "", "", /* 78 - 79 */
 		  "", "", "", "", "", /* 80 - 84 */
-		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 85 - 89 */
 		  "", "", "", "", "", /* 90 - 94 */
 		  "", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */
 		  "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */
diff --git a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
index 0b97fa3f28a..4e0587fd441 100644
--- a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
@@ -155,7 +155,6 @@
 	phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>;
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
-	is-internal-pcspma;
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
index 36a0db44fd2..c439f778ca4 100644
--- a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
@@ -80,7 +80,6 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
-	is-internal-pcspma;
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -112,7 +111,7 @@
 		  "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
 		  "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */
 		  "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */
-		  "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */
+		  "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 - 89 */
 		  "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */
 		  "SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */
 		  "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */
diff --git a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
index 83b8a98d80c..d6cd193a449 100644
--- a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
@@ -101,7 +101,7 @@
 };
 
 &sdhci1 { /* sd1 MIO45-51 cd in place */
-	status = "disable";
+	status = "disabled";
 	no-1-8-v;
 	disable-wp;
 	xlnx,mio-bank = <1>;
@@ -140,9 +140,9 @@
 		  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
 		  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
 		  "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
-		  "", "", "", "", "", /* 78 - 79 */
+		  "", "", /* 78 - 79 */
 		  "", "", "", "", "", /* 80 - 84 */
-		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 85 - 89 */
 		  "", "", "", "", "", /* 90 - 94 */
 		  "", "", "", "", "", /* 95 - 99 */
 		  "", "", "", "", "", /* 100 - 104 */
@@ -300,7 +300,7 @@
 		i2c@3 { /* MEM PMBUS - FIXME bug in schematics */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			/* reg = <3>; */
+			reg = <3>;
 		};
 		i2c@4 { /* LP_I2C_SM */
 			#address-cells = <1>;
@@ -365,25 +365,25 @@
 				#gpio-cells = <2>;
 				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
 						  "", "", "", "";
-				gtr-sel0 {
+				gtr-sel0-hog {
 					gpio-hog;
 					gpios = <0 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_1";
 				};
-				gtr-sel1 {
+				gtr-sel1-hog {
 					gpio-hog;
 					gpios = <1 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_2";
 				};
-				gtr-sel2 {
+				gtr-sel2-hog {
 					gpio-hog;
 					gpios = <2 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_3";
 				};
-				gtr-sel3 {
+				gtr-sel3-hog {
 					gpio-hog;
 					gpios = <3 0>;
 					input; /* FIXME add meaning */
diff --git a/arch/arm/dts/zynqmp-m-a2197-02-revA.dts b/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
index dd37b726d3d..902fdd4de6c 100644
--- a/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
@@ -97,7 +97,7 @@
 };
 
 &sdhci1 { /* sd1 MIO45-51 cd in place */
-	status = "disable";
+	status = "disabled";
 	no-1-8-v;
 	disable-wp;
 	xlnx,mio-bank = <1>;
@@ -135,9 +135,9 @@
 		  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
 		  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
 		  "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
-		  "", "", "", "", "", /* 78 - 79 */
+		  "", "", /* 78 - 79 */
 		  "", "", "", "", "", /* 80 - 84 */
-		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 85 - 89 */
 		  "", "", "", "", "", /* 90 - 94 */
 		  "", "", "", "", "", /* 95 - 99 */
 		  "", "", "", "", "", /* 100 - 104 */
@@ -288,7 +288,7 @@
 		i2c@3 { /* MEM PMBUS - FIXME bug in schematics */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			/* reg = <3>; */
+			reg = <3>;
 		};
 		i2c@4 { /* LP_I2C_SM */
 			#address-cells = <1>;
@@ -367,25 +367,25 @@
 				#gpio-cells = <2>;
 				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
 						  "", "", "", "";
-				gtr-sel0 {
+				gtr-sel0-hog {
 					gpio-hog;
 					gpios = <0 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_1";
 				};
-				gtr-sel1 {
+				gtr-sel1-hog {
 					gpio-hog;
 					gpios = <1 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_2";
 				};
-				gtr-sel2 {
+				gtr-sel2-hog {
 					gpio-hog;
 					gpios = <2 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_3";
 				};
-				gtr-sel3 {
+				gtr-sel3-hog {
 					gpio-hog;
 					gpios = <3 0>;
 					input; /* FIXME add meaning */
diff --git a/arch/arm/dts/zynqmp-m-a2197-03-revA.dts b/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
index 811cebafe9e..f3994bca4a0 100644
--- a/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
@@ -97,7 +97,7 @@
 };
 
 &sdhci1 { /* sd1 MIO45-51 cd in place */
-	status = "disable";
+	status = "disabled";
 	no-1-8-v;
 	disable-wp;
 	xlnx,mio-bank = <1>;
@@ -135,9 +135,9 @@
 		  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
 		  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
 		  "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
-		  "", "", "", "", "", /* 78 - 79 */
+		  "", "", /* 78 - 79 */
 		  "", "", "", "", "", /* 80 - 84 */
-		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 85 - 89 */
 		  "", "", "", "", "", /* 90 - 94 */
 		  "", "", "", "", "", /* 95 - 99 */
 		  "", "", "", "", "", /* 100 - 104 */
@@ -292,7 +292,7 @@
 		i2c@3 { /* MEM PMBUS - FIXME bug in schematics */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			/* reg = <3>; */
+			reg = <3>;
 		};
 		i2c@4 { /* LP_I2C_SM */
 			#address-cells = <1>;
@@ -361,25 +361,25 @@
 				#gpio-cells = <2>;
 				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
 						  "", "", "", "";
-				gtr-sel0 {
+				gtr-sel0-hog {
 					gpio-hog;
 					gpios = <0 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_1";
 				};
-				gtr-sel1 {
+				gtr-sel1-hog {
 					gpio-hog;
 					gpios = <1 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_2";
 				};
-				gtr-sel2 {
+				gtr-sel2-hog {
 					gpio-hog;
 					gpios = <2 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_3";
 				};
-				gtr-sel3 {
+				gtr-sel3-hog {
 					gpio-hog;
 					gpios = <3 0>;
 					input; /* FIXME add meaning */
diff --git a/arch/arm/dts/zynqmp-mini-emmc0.dts b/arch/arm/dts/zynqmp-mini-emmc0.dts
index 7823c58cb27..cf2219797a5 100644
--- a/arch/arm/dts/zynqmp-mini-emmc0.dts
+++ b/arch/arm/dts/zynqmp-mini-emmc0.dts
@@ -41,13 +41,13 @@
 		clock-frequency = <200000000>;
 	};
 
-	amba: amba {
+	amba: axi {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		sdhci0: sdhci@ff160000 {
+		sdhci0: mmc@ff160000 {
 			bootph-all;
 			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
diff --git a/arch/arm/dts/zynqmp-mini-emmc1.dts b/arch/arm/dts/zynqmp-mini-emmc1.dts
index 2f6ba95073a..4c9f56a8076 100644
--- a/arch/arm/dts/zynqmp-mini-emmc1.dts
+++ b/arch/arm/dts/zynqmp-mini-emmc1.dts
@@ -41,13 +41,13 @@
 		clock-frequency = <200000000>;
 	};
 
-	amba: amba {
+	amba: axi {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		sdhci1: sdhci@ff170000 {
+		sdhci1: mmc@ff170000 {
 			bootph-all;
 			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
diff --git a/arch/arm/dts/zynqmp-mini-nand.dts b/arch/arm/dts/zynqmp-mini-nand.dts
index e08a7840d8e..5e2135158cd 100644
--- a/arch/arm/dts/zynqmp-mini-nand.dts
+++ b/arch/arm/dts/zynqmp-mini-nand.dts
@@ -35,7 +35,7 @@
 		bootph-all;
 	};
 
-	amba: amba {
+	amba: axi {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
diff --git a/arch/arm/dts/zynqmp-mini-qspi.dts b/arch/arm/dts/zynqmp-mini-qspi.dts
index e35317f3e2d..917603dec61 100644
--- a/arch/arm/dts/zynqmp-mini-qspi.dts
+++ b/arch/arm/dts/zynqmp-mini-qspi.dts
@@ -36,7 +36,13 @@
 		bootph-all;
 	};
 
-	amba: amba {
+	misc_clk: misc-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	amba: axi {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
@@ -52,19 +58,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
-
-		misc_clk: misc-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
 	};
 };
 
 &qspi {
 	status = "okay";
 	flash0: flash@0 {
-		compatible = "n25q512a11", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-01-revA.dtso b/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-01-revA.dtso
index 197dc252353..82cc383dc4c 100644
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-01-revA.dtso
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-01-revA.dtso
@@ -33,25 +33,25 @@
 				#gpio-cells = <2>;
 				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
 						  "", "", "", "";
-				gtr-sel0 {
+				gtr-sel0-hog {
 					gpio-hog;
 					gpios = <0 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_1";
 				};
-				gtr-sel1 {
+				gtr-sel1-hog {
 					gpio-hog;
 					gpios = <1 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_2";
 				};
-				gtr-sel2 {
+				gtr-sel2-hog {
 					gpio-hog;
 					gpios = <2 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_3";
 				};
-				gtr-sel3 {
+				gtr-sel3-hog {
 					gpio-hog;
 					gpios = <3 0>;
 					input; /* FIXME add meaning */
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-02-revA.dtso b/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-02-revA.dtso
index 8eb6e40dd9d..11b15447246 100644
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-02-revA.dtso
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-02-revA.dtso
@@ -33,25 +33,25 @@
 				#gpio-cells = <2>;
 				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
 						  "", "", "", "";
-				gtr-sel0 {
+				gtr-sel0-hog {
 					gpio-hog;
 					gpios = <0 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_1";
 				};
-				gtr-sel1 {
+				gtr-sel1-hog {
 					gpio-hog;
 					gpios = <1 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_2";
 				};
-				gtr-sel2 {
+				gtr-sel2-hog {
 					gpio-hog;
 					gpios = <2 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_3";
 				};
-				gtr-sel3 {
+				gtr-sel3-hog {
 					gpio-hog;
 					gpios = <3 0>;
 					input; /* FIXME add meaning */
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-03-revA.dtso b/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-03-revA.dtso
index af7a3ce9c1a..9b4c8b3520d 100644
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-03-revA.dtso
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-03-revA.dtso
@@ -33,25 +33,25 @@
 				#gpio-cells = <2>;
 				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
 						  "", "", "", "";
-				gtr-sel0 {
+				gtr-sel0-hog {
 					gpio-hog;
 					gpios = <0 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_1";
 				};
-				gtr-sel1 {
+				gtr-sel1-hog {
 					gpio-hog;
 					gpios = <1 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_2";
 				};
-				gtr-sel2 {
+				gtr-sel2-hog {
 					gpio-hog;
 					gpios = <2 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_3";
 				};
-				gtr-sel3 {
+				gtr-sel3-hog {
 					gpio-hog;
 					gpios = <3 0>;
 					input; /* FIXME add meaning */
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-04-revA.dtso b/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-04-revA.dtso
index 29a6c2a627b..1b1bb365080 100644
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-04-revA.dtso
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-04-revA.dtso
@@ -33,25 +33,25 @@
 				#gpio-cells = <2>;
 				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
 						  "", "", "", "";
-				gtr-sel0 {
+				gtr-sel0-hog {
 					gpio-hog;
 					gpios = <0 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_1";
 				};
-				gtr-sel1 {
+				gtr-sel1-hog {
 					gpio-hog;
 					gpios = <1 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_2";
 				};
-				gtr-sel2 {
+				gtr-sel2-hog {
 					gpio-hog;
 					gpios = <2 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_3";
 				};
-				gtr-sel3 {
+				gtr-sel3-hog {
 					gpio-hog;
 					gpios = <3 0>;
 					input; /* FIXME add meaning */
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-05-revA.dtso b/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-05-revA.dtso
index 6ddf18cf643..8c16286a033 100644
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-05-revA.dtso
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA-x-prc-05-revA.dtso
@@ -33,25 +33,25 @@
 				#gpio-cells = <2>;
 				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
 						  "", "", "", "";
-				gtr-sel0 {
+				gtr-sel0-hog {
 					gpio-hog;
 					gpios = <0 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_1";
 				};
-				gtr-sel1 {
+				gtr-sel1-hog {
 					gpio-hog;
 					gpios = <1 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_2";
 				};
-				gtr-sel2 {
+				gtr-sel2-hog {
 					gpio-hog;
 					gpios = <2 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_3";
 				};
-				gtr-sel3 {
+				gtr-sel3-hog {
 					gpio-hog;
 					gpios = <3 0>;
 					input; /* FIXME add meaning */
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
index 5a60b86a574..ae52e8e996a 100644
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
@@ -90,7 +90,6 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii"; /* DTG generates this properly  1512 */
-	is-internal-pcspma;
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -121,7 +120,7 @@
 		  "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
 		  "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */
 		  "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */
-		  "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */
+		  "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 - 89 */
 		  "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */
 		  "SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */
 		  "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */
@@ -427,25 +426,25 @@
 				#gpio-cells = <2>;
 				gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
 						  "", "", "", "";
-				gtr-sel0 {
+				gtr-sel0-hog {
 					gpio-hog;
 					gpios = <0 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_1";
 				};
-				gtr-sel1 {
+				gtr-sel1-hog {
 					gpio-hog;
 					gpios = <1 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_2";
 				};
-				gtr-sel2 {
+				gtr-sel2-hog {
 					gpio-hog;
 					gpios = <2 0>;
 					input; /* FIXME add meaning */
 					line-name = "sw4_3";
 				};
-				gtr-sel3 {
+				gtr-sel3-hog {
 					gpio-hog;
 					gpios = <3 0>;
 					input; /* FIXME add meaning */
diff --git a/arch/arm/dts/zynqmp-sc-revB.dts b/arch/arm/dts/zynqmp-sc-revB.dts
index c1d713b5d89..1fcb5bfb928 100644
--- a/arch/arm/dts/zynqmp-sc-revB.dts
+++ b/arch/arm/dts/zynqmp-sc-revB.dts
@@ -104,7 +104,7 @@
 		"", "", "ETH_RESET_B", /* 75 - 77, MIO end and EMIO start */
 		"", "", /* 78 - 79 */
 		"", "", "", "", "", /* 80 - 84 */
-		"", "", "", "", "", /* 85 -89 */
+		"", "", "", "", "", /* 85 - 89 */
 		"", "", "", "", "", /* 90 - 94 */
 		"", "", "", "", "", /* 95 - 99 */
 		"", "", "", "", "", /* 100 - 104 */
diff --git a/arch/arm/dts/zynqmp-sc-vn-p-b2197-00-revA.dtso b/arch/arm/dts/zynqmp-sc-vn-p-b2197-00-revA.dtso
index 5333767361f..620afba06e6 100644
--- a/arch/arm/dts/zynqmp-sc-vn-p-b2197-00-revA.dtso
+++ b/arch/arm/dts/zynqmp-sc-vn-p-b2197-00-revA.dtso
@@ -115,25 +115,25 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "xprc_sw_1", "xprc_sw_2", "xprc_sw_3", "xprc_sw_4",
 					"", "", "", "";
-		gtr-sel0 {
+		gtr-sel0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			input; /* FIXME add meaning */
 			line-name = "xprc_sw_1";
 		};
-		gtr-sel1 {
+		gtr-sel1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input; /* FIXME add meaning */
 			line-name = "xprc_sw_1";
 		};
-		gtr-sel2 {
+		gtr-sel2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input; /* FIXME add meaning */
 			line-name = "xprc_sw_1";
 		};
-		gtr-sel3 {
+		gtr-sel3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			input; /* FIXME add meaning */
diff --git a/arch/arm/dts/zynqmp-sc-vpk180-revA.dtso b/arch/arm/dts/zynqmp-sc-vpk180-revA.dtso
index 18625933ad3..ba5484573c9 100644
--- a/arch/arm/dts/zynqmp-sc-vpk180-revA.dtso
+++ b/arch/arm/dts/zynqmp-sc-vpk180-revA.dtso
@@ -16,6 +16,12 @@
 &{/} {
 	compatible = "xlnx,zynqmp-sc-vpk180-revA", "xlnx,zynqmp-vpk180-revA",
 		     "xlnx,zynqmp-vpk180", "xlnx,zynqmp";
+
+	vc7_xin: vc7-xin {
+		compatible = "fixed-clock";
+		#clock-cells = <0x0>;
+		clock-frequency = <50000000>;
+	};
 };
 
 &i2c0 {
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
index ce7c5eb6d34..6349a0e1087 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
@@ -195,7 +195,6 @@
 	phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>;
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
-	is-internal-pcspma;
 	assigned-clock-rates = <250000000>;
 };
 
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
index 0a0cbd2b69a..b0d737d3caf 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
@@ -216,7 +216,6 @@
 	phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>;
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
-	is-internal-pcspma;
 	assigned-clock-rates = <250000000>;
 };
 
diff --git a/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts b/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts
index b626d1aacf5..7849f8c540b 100644
--- a/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts
+++ b/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts
@@ -117,7 +117,6 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii"; /* DTG generates this properly 1512 */
-	is-internal-pcspma;
 	/* phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; */
 	mdio: mdio {
 		#address-cells = <1>;
diff --git a/arch/arm/dts/zynqmp-vpk120-revA.dts b/arch/arm/dts/zynqmp-vpk120-revA.dts
index e0632883e4e..4768fac71d0 100644
--- a/arch/arm/dts/zynqmp-vpk120-revA.dts
+++ b/arch/arm/dts/zynqmp-vpk120-revA.dts
@@ -118,7 +118,6 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii"; /* DTG generates this properly 1512 */
-	is-internal-pcspma;
 	/* phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; */
 	mdio: mdio {
 		#address-cells = <1>;
diff --git a/arch/arm/dts/zynqmp-zcu106-rev1.0.dts b/arch/arm/dts/zynqmp-zcu106-rev1.0.dts
index a9b5826a777..f1ec314fdef 100644
--- a/arch/arm/dts/zynqmp-zcu106-rev1.0.dts
+++ b/arch/arm/dts/zynqmp-zcu106-rev1.0.dts
@@ -11,6 +11,6 @@
 
 / {
 	model = "ZynqMP ZCU106 Rev1.0";
-	compatible = "xlnx,zynqmp-zcu106-rev1.0", "xlnx,zynqmp-zcu106-revA",
+	compatible = "xlnx,zynqmp-zcu106-rev1.0",
 		     "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
 };
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 787cf0d87f9..3a1580dfc40 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -494,7 +494,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
-				sc18is603@2f { /* sc18is602 - u93 */
+				sc18is603: spi@2f { /* sc18is602 - u93 */
 					compatible = "nxp,sc18is603";
 					reg = <0x2f>;
 					/* 4 gpios for CS not handled by driver */
diff --git a/arch/arm/dts/zynqmp-zcu1275-revB.dts b/arch/arm/dts/zynqmp-zcu1275-revB.dts
index 4060dc3613a..ed83ba32791 100644
--- a/arch/arm/dts/zynqmp-zcu1275-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revB.dts
@@ -43,6 +43,7 @@
 
 &gem1 {
 	status = "okay";
+	phy-mode = "rgmii-id";
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts
index a113e475082..88536e917d9 100644
--- a/arch/arm/dts/zynqmp-zcu208-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu208-revA.dts
@@ -68,7 +68,7 @@
 		compatible = "iio-hwmon";
 		io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
 	};
-	ina226-vccint-io-bram-ps {
+	ina226-vccint-io-bram {
 		compatible = "iio-hwmon";
 		io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
 	};
@@ -205,7 +205,7 @@
 		  "ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
 		  "", "", /* 78 - 79 */
 		  "", "", "", "", "", /* 80 - 84 */
-		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 85 - 89 */
 		  "", "", "", "", "", /* 90 - 94 */
 		  "", "", "", "", "", /* 95 - 99 */
 		  "", "", "", "", "", /* 100 - 104 */
diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts
index 4d7d5d2e5ef..29087aa7cb9 100644
--- a/arch/arm/dts/zynqmp-zcu216-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu216-revA.dts
@@ -68,7 +68,7 @@
 		compatible = "iio-hwmon";
 		io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
 	};
-	ina226-vccint-io-bram-ps {
+	ina226-vccint-io-bram {
 		compatible = "iio-hwmon";
 		io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
 	};
@@ -211,7 +211,7 @@
 		  "ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
 		  "", "", /* 78 - 79 */
 		  "", "", "", "", "", /* 80 - 84 */
-		  "", "", "", "", "", /* 85 -89 */
+		  "", "", "", "", "", /* 85 - 89 */
 		  "", "", "", "", "", /* 90 - 94 */
 		  "", "", "", "", "", /* 95 - 99 */
 		  "", "", "", "", "", /* 100 - 104 */
diff --git a/arch/arm/dts/zynqmp-zcu670-revA.dts b/arch/arm/dts/zynqmp-zcu670-revA.dts
index def3b53cef7..2928ebe56fc 100644
--- a/arch/arm/dts/zynqmp-zcu670-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu670-revA.dts
@@ -71,7 +71,7 @@
 		compatible = "iio-hwmon";
 		io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
 	};
-	ina226-vccint-io-bram-ps {
+	ina226-vccint-io-bram {
 		compatible = "iio-hwmon";
 		io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
 	};
diff --git a/arch/arm/dts/zynqmp-zcu670-revB.dts b/arch/arm/dts/zynqmp-zcu670-revB.dts
index 41f9a23d06a..1a99d1e08fb 100644
--- a/arch/arm/dts/zynqmp-zcu670-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu670-revB.dts
@@ -71,7 +71,7 @@
 		compatible = "iio-hwmon";
 		io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
 	};
-	ina226-vccint-io-bram-ps {
+	ina226-vccint-io-bram {
 		compatible = "iio-hwmon";
 		io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
 	};
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index b2ae74a59f1..648edf308f6 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -4,8 +4,6 @@
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  */
 
-/* for now: just dummy functions to satisfy the linker */
-
 #include <config.h>
 #include <cpu_func.h>
 #include <log.h>
diff --git a/arch/arm/lib/sections.c b/arch/arm/lib/sections.c
index 07efabaa7dc..8955aa6111c 100644
--- a/arch/arm/lib/sections.c
+++ b/arch/arm/lib/sections.c
@@ -5,7 +5,7 @@
 #include <linux/compiler.h>
 
 /**
- * These two symbols are declared in a C file so that the linker
+ * These symbols are declared in a C file so that the linker
  * uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one
  * it would use if the symbols were defined in the linker file.
  * Using only R_ARM_RELATIVE relocation ensures that references to
diff --git a/arch/arm/mach-at91/include/mach/at91_common.h b/arch/arm/mach-at91/include/mach/at91_common.h
index 683e539b1b3..8fec346c1e4 100644
--- a/arch/arm/mach-at91/include/mach/at91_common.h
+++ b/arch/arm/mach-at91/include/mach/at91_common.h
@@ -28,7 +28,7 @@ void at91_pllb_init(u32 pllar);
 void at91_mck_init(u32 mckr);
 void at91_mck_init_down(u32 mckr);
 void at91_pmc_init(void);
-void mem_init(void);
+void at91_mem_init(void);
 void at91_phy_reset(void);
 void at91_sdram_hw_init(void);
 void at91_mck_init(u32 mckr);
diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c
index cde1700a283..0d1233cd109 100644
--- a/arch/arm/mach-at91/spl_at91.c
+++ b/arch/arm/mach-at91/spl_at91.c
@@ -142,7 +142,7 @@ void board_init_f(ulong dummy)
 	preloader_console_init();
 #endif
 
-	mem_init();
+	at91_mem_init();
 
 	at91_spl_board_init();
 }
diff --git a/arch/arm/mach-at91/spl_atmel.c b/arch/arm/mach-at91/spl_atmel.c
index 62a7df8a195..7bfbadf0483 100644
--- a/arch/arm/mach-at91/spl_atmel.c
+++ b/arch/arm/mach-at91/spl_atmel.c
@@ -134,7 +134,7 @@ void board_init_f(ulong dummy)
 
 	board_early_init_f();
 
-	mem_init();
+	at91_mem_init();
 
 	ret = spl_init();
 	if (ret) {
diff --git a/arch/arm/mach-imx/cmd_mfgprot.c b/arch/arm/mach-imx/cmd_mfgprot.c
index 9f37e611a1e..8f66de699c5 100644
--- a/arch/arm/mach-imx/cmd_mfgprot.c
+++ b/arch/arm/mach-imx/cmd_mfgprot.c
@@ -143,6 +143,6 @@ U_BOOT_LONGHELP(mfgprot,
 
 U_BOOT_CMD(
 	mfgprot, 4, 1, do_mfgprot,
-	"Manufacturing Protection\n",
+	"Manufacturing Protection",
 	mfgprot_help_text
 );
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 46974bf0618..5293cb85e56 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -1004,6 +1004,7 @@ int disable_vpu_nodes(void *blob)
 		"/soc@0/video-codec@38300000",
 		"/soc@0/video-codec@38310000",
 		"/soc@0/blk-ctrl@38330000",
+		"/soc@0/blk-ctl@38330000",
 	};
 
 	if (is_imx8mq())
diff --git a/arch/arm/mach-omap2/omap3/emac.c b/arch/arm/mach-omap2/omap3/emac.c
index 7348e92cabd..1e30a06361d 100644
--- a/arch/arm/mach-omap2/omap3/emac.c
+++ b/arch/arm/mach-omap2/omap3/emac.c
@@ -9,6 +9,7 @@
 #include <net.h>
 #include <asm/io.h>
 #include <asm/arch/am35x_def.h>
+#include <netdev.h>
 
 /*
  * Initializes on-chip ethernet controllers.
diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/board.c
index 0fdf9365b41..3fadf7e4122 100644
--- a/arch/arm/mach-rockchip/board.c
+++ b/arch/arm/mach-rockchip/board.c
@@ -202,14 +202,6 @@ int board_late_init(void)
 
 int board_init(void)
 {
-	int ret;
-
-#ifdef CONFIG_DM_REGULATOR
-	ret = regulators_enable_boot_on(false);
-	if (ret)
-		debug("%s: Cannot enable boot on regulator\n", __func__);
-#endif
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-sc5xx/Kconfig b/arch/arm/mach-sc5xx/Kconfig
index 3846b4fd5b6..30444f04fc4 100644
--- a/arch/arm/mach-sc5xx/Kconfig
+++ b/arch/arm/mach-sc5xx/Kconfig
@@ -13,46 +13,115 @@
 
 if ARCH_SC5XX
 
+config SYS_VENDOR
+	default "adi"
+
+choice
+	prompt "SC5xx SoC Select"
+	help
+	  Selects which series of Analog Devices SC5xx chips to support.
+
 config SC57X
-	bool
-	select SUPPORT_SPL
-	select CPU_V7A
-	select PANIC_HANG
+	bool "SC57x series"
 	select COMMON_CLK_ADI_SC57X
-	select TIMER
-	select ADI_SC5XX_TIMER
+	select CPU_V7A
+	select TARGET_SC573_EZKIT
 
 config SC58X
-	bool
-	select SUPPORT_SPL
-	select CPU_V7A
-	select PANIC_HANG
+	bool "SC58x series"
 	select COMMON_CLK_ADI_SC58X
-	select TIMER
-	select ADI_SC5XX_TIMER
+	select CPU_V7A
 
 config SC59X
-	bool
-	select SUPPORT_SPL
-	select CPU_V7A
-	select PANIC_HANG
+	bool "SC59x 32-bit series"
 	select COMMON_CLK_ADI_SC594
-	select TIMER
-	select ADI_SC5XX_TIMER
-	select NOP_PHY
+	select CPU_V7A
+	select NOP_PHY if PHY
 
 config SC59X_64
-	bool
-	select SUPPORT_SPL
-	select PANIC_HANG
-	select MMC_SDHCI_ADMA_FORCE_32BIT
+	bool "SC59x 64-bit series"
 	select ARM64
-	select DM
-	select DM_SERIAL
 	select COMMON_CLK_ADI_SC598
 	select GICV3
+	select GICV3_SUPPORT_GIC600
 	select GIC_600_CLEAR_RDPD
-	select NOP_PHY
+	select MMC_SDHCI_ADMA_FORCE_32BIT
+	select NOP_PHY if PHY
+
+endchoice
+
+if SC57X
+
+config TARGET_SC573_EZKIT
+	bool "Support SC573-EZKIT"
+
+endif
+
+if SC58X
+
+choice
+	prompt "SC58x board select"
+
+config TARGET_SC584_EZKIT
+	bool
+	prompt "SC584-EZKIT"
+	select ADI_USE_DDR2
+
+config TARGET_SC589_MINI
+	bool
+	prompt "SC589-MINI"
+
+config TARGET_SC589_EZKIT
+	bool
+	prompt "SC589-EZKIT"
+
+endchoice
+
+endif
+
+if SC59X
+
+choice
+	prompt "SC59x 32-bit board select"
+
+config TARGET_SC594_SOM_EZLITE
+	bool
+	prompt "SC594-SOM with SOMCRR-EZLITE"
+	select ADI_CARRIER_SOMCRR_EZLITE
+
+config TARGET_SC594_SOM_EZKIT
+	bool
+	prompt "SC594-SOM with SOMCRR-EZKIT"
+	select ADI_CARRIER_SOMCRR_EZKIT
+
+endchoice
+
+endif
+
+if SC59X_64
+
+choice
+	prompt "SC59x 64-bit board select"
+
+config TARGET_SC598_SOM_EZLITE
+	bool
+	prompt "SC598-SOM with SOMCRR-EZLITE"
+	select ADI_CARRIER_SOMCRR_EZLITE
+
+config TARGET_SC598_SOM_EZKIT
+	bool
+	prompt "SC598-SOM with SOMCRR-EZKIT"
+	select ADI_CARRIER_SOMCRR_EZKIT
+
+endchoice
+
+endif
+
+config ADI_IMAGE
+	string "ADI fitImage type"
+	help
+	  The image built by the ADI ADSP Linux build system.
+	  Is one of tiny, minimal, full.
 
 config SC_BOOT_MODE
 	int "SC5XX boot mode select"
@@ -93,10 +162,25 @@ config SC_BOOT_OSPI_SSEL
 	  This is the OSPI chip select number to use for booting, Y in the
 	  expression `sf probe X:Y`
 
+config SYS_BOOTM_LEN
+	hex
+	default 0x1800000
+
 config SYS_FLASH_BASE
 	hex
 	default 0x60000000
 
+config SYS_MALLOC_F_LEN
+	default 0x14000
+
+config SYS_LOAD_ADDR
+	hex
+	default 0x0
+
+config SYS_MALLOC_LEN
+	hex
+	default 1048576
+
 config UART_CONSOLE
 	int
 	default 0
@@ -472,4 +556,13 @@ config PINCTRL_ADI
 	bool
 	default y
 
+source "board/adi/sc598-som-ezkit/Kconfig"
+source "board/adi/sc598-som-ezlite/Kconfig"
+source "board/adi/sc594-som-ezkit/Kconfig"
+source "board/adi/sc594-som-ezlite/Kconfig"
+source "board/adi/sc589-ezkit/Kconfig"
+source "board/adi/sc589-mini/Kconfig"
+source "board/adi/sc584-ezkit/Kconfig"
+source "board/adi/sc573-ezkit/Kconfig"
+
 endif
diff --git a/arch/arm/mach-sc5xx/Makefile b/arch/arm/mach-sc5xx/Makefile
index eeb56c078b3..cac768ba565 100644
--- a/arch/arm/mach-sc5xx/Makefile
+++ b/arch/arm/mach-sc5xx/Makefile
@@ -11,9 +11,13 @@
 obj-y += soc.o init/
 
 obj-$(CONFIG_SC57X) += sc57x.o
+obj-$(CONFIG_SC57X) += sc57x-spl.o
 obj-$(CONFIG_SC58X) += sc58x.o
+obj-$(CONFIG_SC58X) += sc58x-spl.o
 obj-$(CONFIG_SC59X) += sc59x.o
+obj-$(CONFIG_SC59X) += sc59x-spl.o
 obj-$(CONFIG_SC59X_64) += sc59x_64.o
+obj-$(CONFIG_SC59X_64) += sc59x_64-spl.o
 
 obj-$(CONFIG_SPL_BUILD) += spl.o
 obj-$(CONFIG_SYSCON) += rcu.o
diff --git a/arch/arm/mach-sc5xx/sc57x-spl.c b/arch/arm/mach-sc5xx/sc57x-spl.c
new file mode 100644
index 00000000000..28380b89b48
--- /dev/null
+++ b/arch/arm/mach-sc5xx/sc57x-spl.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <asm/arch-adi/sc5xx/spl.h>
+
+// Table 45-16 in SC573 HRM
+const struct adi_boot_args adi_rom_boot_args[] = {
+	// JTAG/no boot
+	[0] = {0, 0, 0},
+	// SPI master, used for qspi as well
+	[1] = {0x60020000, 0x00040000, 0x00010207},
+	// SPI slave
+	[2] = {0, 0, 0x00000212},
+	// UART slave
+	[3] = {0, 0, 0x00000013},
+	// Linkport slave
+	[4] = {0, 0, 0x00000014},
+	// reserved, no boot
+	[5] = {0, 0, 0},
+	// reserved, no boot
+	[6] = {0, 0, 0},
+	// reserved, also no boot
+	[7] = {0, 0, 0}
+};
diff --git a/arch/arm/mach-sc5xx/sc58x-spl.c b/arch/arm/mach-sc5xx/sc58x-spl.c
new file mode 100644
index 00000000000..ae809f09e55
--- /dev/null
+++ b/arch/arm/mach-sc5xx/sc58x-spl.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <asm/arch-adi/sc5xx/spl.h>
+
+// Table 53-13 in SC58x HRM
+const struct adi_boot_args adi_rom_boot_args[] = {
+	// JTAG/no boot
+	[0] = {0, 0, 0},
+	// SPI master, used for qspi as well
+	[1] = {0x60020000, 0x00040000, 0x00010207},
+	// SPI slave
+	[2] = {0, 0, 0x00000212},
+	// reserved, no boot
+	[3] = {0, 0, 0},
+	// reserved, no boot
+	[4] = {0, 0, 0},
+	// reserved, also no boot
+	[5] = {0, 0, 0},
+	// Linkport slave
+	[6] = {0, 0, 0x00000014},
+	// UART slave
+	[7] = {0, 0, 0x00000013},
+};
diff --git a/arch/arm/mach-sc5xx/sc59x-spl.c b/arch/arm/mach-sc5xx/sc59x-spl.c
new file mode 100644
index 00000000000..c8fc25fe7c4
--- /dev/null
+++ b/arch/arm/mach-sc5xx/sc59x-spl.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <asm/arch-adi/sc5xx/spl.h>
+
+// Table 45-14 in sc594 HRM
+const struct adi_boot_args adi_rom_boot_args[] = {
+	// JTAG/no boot
+	[0] = {0, 0, 0},
+	// SPI master, used for qspi as well
+	[1] = {0x60040000, 0x00040000, 0x20620247},
+	// SPI slave
+	[2] = {0, 0, 0x00000212},
+	// UART slave
+	[3] = {0, 0, 0x00000013},
+	// Linkport slave
+	[4] = {0, 0, 0x00000014},
+	// OSPI master
+	[5] = {0x60040000, 0, 0x00000008},
+	// reserved, no boot
+	[6] = {0, 0, 0},
+	// reserved, also no boot
+	[7] = {0, 0, 0}
+};
diff --git a/arch/arm/mach-sc5xx/sc59x_64-spl.c b/arch/arm/mach-sc5xx/sc59x_64-spl.c
new file mode 100644
index 00000000000..3992538133d
--- /dev/null
+++ b/arch/arm/mach-sc5xx/sc59x_64-spl.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <asm/arch-adi/sc5xx/spl.h>
+
+// Table 47-14 in SC598 hardware reference manual
+const struct adi_boot_args adi_rom_boot_args[] = {
+	// JTAG/no boot
+	[0] = {0, 0, 0},
+	// SPI master, used for qspi as well
+	[1] = {0x60040000, 0x00040000, 0x20620247},
+	// SPI slave
+	[2] = {0, 0, 0x00000212},
+	// UART slave
+	[3] = {0, 0, 0x00000013},
+	// Linkport slave
+	[4] = {0, 0, 0x00000014},
+	// OSPI master
+	[5] = {0x60040000, 0, 0x00000008},
+	// eMMC
+	[6] = {0x201, 0, 0x86009},
+	// reserved, also no boot
+	[7] = {0, 0, 0}
+};
diff --git a/arch/arm/mach-sc5xx/sc59x_64.c b/arch/arm/mach-sc5xx/sc59x_64.c
index 82537bf1965..001747f223d 100644
--- a/arch/arm/mach-sc5xx/sc59x_64.c
+++ b/arch/arm/mach-sc5xx/sc59x_64.c
@@ -9,6 +9,7 @@
  */
 
 #include <asm/io.h>
+#include <asm/armv8/mmu.h>
 #include <asm/arch-adi/sc5xx/sc5xx.h>
 #include <asm/arch-adi/sc5xx/spl.h>
 
@@ -24,6 +25,30 @@
 #define BITM_SCB5_SPI2_OSPI_REMAP_REMAP 0x00000003
 #define ENUM_SCB5_SPI2_OSPI_REMAP_OSPI0 0x00000001
 
+static struct mm_region sc598_mem_map[] = {
+	{
+		/* Peripherals */
+		.virt = 0x0UL,
+		.phys = 0x0UL,
+		.size = 0x80000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* DDR */
+		.virt = 0x80000000UL,
+		.phys = 0x80000000UL,
+		.size = 0x40000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = sc598_mem_map;
+
 adi_rom_boot_fn adi_rom_boot = (adi_rom_boot_fn)0x000000e4;
 
 void sc5xx_enable_rgmii(void)
diff --git a/arch/arm/mach-sc5xx/soc.c b/arch/arm/mach-sc5xx/soc.c
index 8f13127a660..f3619206e91 100644
--- a/arch/arm/mach-sc5xx/soc.c
+++ b/arch/arm/mach-sc5xx/soc.c
@@ -172,6 +172,42 @@ void fixup_dp83867_phy(struct phy_device *phydev)
 		phy_write(phydev, MDIO_DEVAD_NONE, 0, 0x3100);
 }
 
+extern char __bss_start, __bss_end;
+extern char __rel_dyn_end;
+
+void bss_clear(void)
+{
+	char *bss_start = &__bss_start;
+	char *bss_end = &__bss_end;
+	char *rel_dyn_end = &__rel_dyn_end;
+
+	char *start;
+
+	if (rel_dyn_end >= bss_start && rel_dyn_end <= bss_end)
+		start = rel_dyn_end;
+	else
+		start = bss_start;
+
+	u32 *pt;
+	size_t sz = bss_end - start;
+
+	for (int i = 0; i < sz; i += 4) {
+		pt = (u32 *)(start + i);
+		*pt = 0;
+	}
+}
+
+int board_early_init_f(void)
+{
+	bss_clear();
+	return 0;
+}
+
+int board_init(void)
+{
+	return 0;
+}
+
 int dram_init(void)
 {
 	gd->ram_size = CFG_SYS_SDRAM_SIZE;
diff --git a/arch/arm/mach-snapdragon/board.c b/arch/arm/mach-snapdragon/board.c
index 0af297470a6..2ab2ceb5138 100644
--- a/arch/arm/mach-snapdragon/board.c
+++ b/arch/arm/mach-snapdragon/board.c
@@ -237,7 +237,6 @@ void __weak qcom_board_init(void)
 
 int board_init(void)
 {
-	regulators_enable_boot_on(false);
 	show_psci_version();
 	qcom_of_fixup_nodes();
 	qcom_board_init();
diff --git a/arch/arm/mach-stm32mp/stm32mp1/psci.c b/arch/arm/mach-stm32mp/stm32mp1/psci.c
index bfbf420fdb5..a02a8988a68 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/psci.c
+++ b/arch/arm/mach-stm32mp/stm32mp1/psci.c
@@ -393,8 +393,7 @@ static int __secure secure_waitbits(u32 reg, u32 mask, u32 val)
 	asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (start));
 	for (;;) {
 		tmp = readl(reg);
-		tmp &= mask;
-		if ((tmp & val) == val)
+		if ((tmp & mask) == val)
 			return 0;
 		asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (end));
 		if ((end - start) > delay)
diff --git a/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c
index f096fe538d8..ca202bec8ee 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c
+++ b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c
@@ -148,8 +148,8 @@ static void security_init(void)
 	 */
 	clrsetbits_le32(TAMP_SMCR,
 			TAMP_SMCR_BKPRWDPROT | TAMP_SMCR_BKPWDPROT,
-			FIELD_PREP(TAMP_SMCR_BKPRWDPROT, 0x20) |
-			FIELD_PREP(TAMP_SMCR_BKPWDPROT, 0x20));
+			FIELD_PREP(TAMP_SMCR_BKPRWDPROT, 0x0A) |
+			FIELD_PREP(TAMP_SMCR_BKPWDPROT, 0x0F));
 
 	/* GPIOZ: deactivate the security */
 	writel(BIT(0), RCC_MP_AHB5ENSETR);
diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c
index 7971e3b68d5..5c5838629b2 100644
--- a/arch/arm/mach-tegra/board2.c
+++ b/arch/arm/mach-tegra/board2.c
@@ -187,9 +187,6 @@ int board_init(void)
 	warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE);
 #endif
 
-	/* Set up boot-on regulators */
-	regulators_enable_boot_on(_DEBUG);
-
 	return nvidia_board_init();
 }
 
diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h
index 9228fa3c802..49e449ebd61 100644
--- a/arch/arm/mach-zynqmp/include/mach/hardware.h
+++ b/arch/arm/mach-zynqmp/include/mach/hardware.h
@@ -67,6 +67,8 @@ struct crlapb_regs {
 
 #define crlapb_base ((struct crlapb_regs *)ZYNQMP_CRL_APB_BASEADDR)
 
+#define ZYNQMP_IOU_SECURE_SLCR 0xFF240000
+
 #define ZYNQMP_IOU_SCNTR_SECURE	0xFF260000
 #define ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN	0x1
 #define ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG	0x2
@@ -130,6 +132,9 @@ struct crfapb_regs {
 
 #define crfapb_base ((struct crfapb_regs *)ZYNQMP_CRF_APB_BASEADDR)
 
+#define ZYNQMP_CCI_REG_CCI_MISC_CTRL	0xFD5E0040
+#define ZYNQMP_CCI_REG_CCI_MISC_CTRL_NIDEN	BIT(1)
+
 #define ZYNQMP_APU_BASEADDR	0xFD5C0000
 
 struct apu_regs {
diff --git a/arch/sandbox/include/asm/sections.h b/arch/sandbox/include/asm/sections.h
index 88837bb35c8..5e1577419b0 100644
--- a/arch/sandbox/include/asm/sections.h
+++ b/arch/sandbox/include/asm/sections.h
@@ -10,6 +10,7 @@
 #define __SANDBOX_SECTIONS_H
 
 #include <asm-generic/sections.h>
+#include <linux/compiler_attributes.h>
 
 struct sandbox_cmdline_option;
 
diff --git a/board/Marvell/octeontx2_cn913x/board.c b/board/Marvell/octeontx2_cn913x/board.c
index 3d20cfb2fab..3ffe15d42b8 100644
--- a/board/Marvell/octeontx2_cn913x/board.c
+++ b/board/Marvell/octeontx2_cn913x/board.c
@@ -23,11 +23,6 @@ int board_early_init_f(void)
 
 int board_early_init_r(void)
 {
-	if (CONFIG_IS_ENABLED(DM_REGULATOR)) {
-		/* Check if any existing regulator should be turned down */
-		regulators_enable_boot_off(false);
-	}
-
 	return 0;
 }
 
diff --git a/board/adi/sc573-ezkit/Kconfig b/board/adi/sc573-ezkit/Kconfig
new file mode 100644
index 00000000000..328563c1296
--- /dev/null
+++ b/board/adi/sc573-ezkit/Kconfig
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2024 - Analog Devices, Inc.
+
+if TARGET_SC573_EZKIT
+
+config SYS_BOARD
+	default "sc573-ezkit"
+
+config SYS_CONFIG_NAME
+	default "sc573-ezkit"
+
+config LDR_CPU
+	default "ADSP-SC573-0.0"
+
+config DEFAULT_DEVICE_TREE
+	default "sc573-ezkit"
+
+config ADI_IMAGE
+	default "tiny"
+
+config CUSTOM_SYS_INIT_SP_ADDR
+	default 0x8203f000
+
+# SPI Flash
+
+config SF_DEFAULT_BUS
+	default 2
+
+config SF_DEFAULT_CS
+	default 1
+
+config SF_DEFAULT_SPEED
+	default 10000000
+
+# Clocks
+
+config CGU0_DF_DIV
+	default 0
+
+config CGU0_VCO_MULT
+	default 18
+
+config CGU0_CCLK_DIV
+	default 1
+
+config CGU0_SCLK_DIV
+	default 2
+
+config CGU0_SCLK0_DIV
+	default 2
+
+config CGU0_SCLK1_DIV
+	default 2
+
+config CGU0_DCLK_DIV
+	default 2
+
+config CGU0_OCLK_DIV
+	default 3
+
+config CGU1_VCO_MULT
+	default 5
+
+config CGU1_DF_DIV
+	default 0
+
+config CGU1_CCLK_DIV
+	default 1
+
+config CGU1_SCLK_DIV
+	default 2
+
+config CGU1_SCLK0_DIV
+	default 2
+
+config CGU1_SCLK1_DIV
+	default 2
+
+config CGU1_DCLK_DIV
+	default 2
+
+config CGU1_OCLK_DIV
+	default 3
+
+config CDU0_CLKO0
+	default 1
+
+config CDU0_CLKO1
+	default 1
+
+config CDU0_CLKO2
+	default 1
+
+config CDU0_CLKO3
+	default 1
+
+config CDU0_CLKO4
+	default 1
+
+config CDU0_CLKO5
+	default 1
+
+config CDU0_CLKO6
+	default 1
+
+config CDU0_CLKO7
+	default 5
+
+config CDU0_CLKO8
+	default 1
+
+config CDU0_CLKO9
+	default 1
+
+endif
diff --git a/board/adi/sc573-ezkit/sc573-ezkit.env b/board/adi/sc573-ezkit/sc573-ezkit.env
new file mode 100644
index 00000000000..26f7b6cb799
--- /dev/null
+++ b/board/adi/sc573-ezkit/sc573-ezkit.env
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later+ */
+
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <env/adi/adi_boot.env>
+
+adi_stage2_offset=0x20000
+adi_image_offset=0xE0000
+adi_rfs_offset=0x6E0000
+loadaddr=0x83000000
+jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc573-ezkit.jffs2
diff --git a/board/adi/sc584-ezkit/Kconfig b/board/adi/sc584-ezkit/Kconfig
new file mode 100644
index 00000000000..14c47f1d69d
--- /dev/null
+++ b/board/adi/sc584-ezkit/Kconfig
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2024 - Analog Devices, Inc.
+
+if TARGET_SC584_EZKIT
+
+config LDR_CPU
+	default	"ADSP-SC584-0.1"
+
+config SYS_BOARD
+	default "sc584-ezkit"
+
+config SYS_CONFIG_NAME
+	default "sc584-ezkit"
+
+config DEFAULT_DEVICE_TREE
+	default "sc584-ezkit"
+
+config ADI_IMAGE
+	default "tiny"
+
+config CUSTOM_SYS_INIT_SP_ADDR
+	default 0x8903f000
+
+# SPI Flash
+
+config SF_DEFAULT_BUS
+	default 2
+
+config SF_DEFAULT_CS
+	default 1
+
+config SF_DEFAULT_SPEED
+	default 5000000
+
+# Clocks
+
+config CGU0_DF_DIV
+	default 0
+
+config CGU0_VCO_MULT
+	default 18
+
+config CGU0_CCLK_DIV
+	default 1
+
+config CGU0_SCLK_DIV
+	default 2
+
+config CGU0_SCLK0_DIV
+	default 2
+
+config CGU0_SCLK1_DIV
+	default 2
+
+config CGU0_DCLK_DIV
+	default 2
+
+config CGU0_OCLK_DIV
+	default 3
+
+config CGU1_VCO_MULT
+	default 5
+
+config CGU1_DF_DIV
+	default 0
+
+config CGU1_CCLK_DIV
+	default 1
+
+config CGU1_SCLK_DIV
+	default 2
+
+config CGU1_SCLK0_DIV
+	default 2
+
+config CGU1_SCLK1_DIV
+	default 2
+
+config CGU1_DCLK_DIV
+	default 2
+
+config CGU1_OCLK_DIV
+	default 3
+
+config CDU0_CLKO0
+	default 1
+
+config CDU0_CLKO1
+	default 1
+
+config CDU0_CLKO2
+	default 1
+
+config CDU0_CLKO3
+	default 1
+
+config CDU0_CLKO4
+	default 1
+
+config CDU0_CLKO5
+	default 1
+
+config CDU0_CLKO6
+	default 1
+
+config CDU0_CLKO7
+	default 5
+
+config CDU0_CLKO8
+	default 1
+
+config CDU0_CLKO9
+	default 1
+
+endif
diff --git a/board/adi/sc584-ezkit/sc584-ezkit.env b/board/adi/sc584-ezkit/sc584-ezkit.env
new file mode 100644
index 00000000000..af9a9e01bcf
--- /dev/null
+++ b/board/adi/sc584-ezkit/sc584-ezkit.env
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later+ */
+
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <env/adi/adi_boot.env>
+
+adi_stage2_offset=0x20000
+adi_image_offset=0xE0000
+adi_rfs_offset=0x6E0000
+loadaddr=0x89300000
+jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc584-ezkit.jffs2
diff --git a/board/adi/sc589-ezkit/Kconfig b/board/adi/sc589-ezkit/Kconfig
new file mode 100644
index 00000000000..b5f555f3a21
--- /dev/null
+++ b/board/adi/sc589-ezkit/Kconfig
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2024 - Analog Devices, Inc.
+
+if TARGET_SC589_EZKIT
+
+config LDR_CPU
+	default	"ADSP-SC589-0.1"
+
+config SYS_BOARD
+	default "sc589-ezkit"
+
+config SYS_CONFIG_NAME
+	default "sc589"
+
+config DEFAULT_DEVICE_TREE
+	default "sc589-ezkit"
+
+config ADI_IMAGE
+	default "tiny"
+
+config CUSTOM_SYS_INIT_SP_ADDR
+	default 0xC203f000
+
+# SPI Flash
+
+config SF_DEFAULT_BUS
+	default 2
+
+config SF_DEFAULT_CS
+	default 1
+
+config SF_DEFAULT_SPEED
+	default 10000000
+
+# Clocks
+
+config CGU0_DF_DIV
+	default 0
+
+config CGU0_VCO_MULT
+	default 18
+
+config CGU0_CCLK_DIV
+	default 1
+
+config CGU0_SCLK_DIV
+	default 2
+
+config CGU0_SCLK0_DIV
+	default 2
+
+config CGU0_SCLK1_DIV
+	default 2
+
+config CGU0_DCLK_DIV
+	default 1
+
+config CGU0_OCLK_DIV
+	default 3
+
+config CGU1_VCO_MULT
+	default 5
+
+config CGU1_DF_DIV
+	default 0
+
+config CGU1_CCLK_DIV
+	default 1
+
+config CGU1_SCLK_DIV
+	default 2
+
+config CGU1_SCLK0_DIV
+	default 2
+
+config CGU1_SCLK1_DIV
+	default 2
+
+config CGU1_DCLK_DIV
+	default 2
+
+config CGU1_OCLK_DIV
+	default 3
+
+config CDU0_CLKO0
+	default 1
+
+config CDU0_CLKO1
+	default 1
+
+config CDU0_CLKO2
+	default 1
+
+config CDU0_CLKO3
+	default 1
+
+config CDU0_CLKO4
+	default 1
+
+config CDU0_CLKO5
+	default 1
+
+config CDU0_CLKO6
+	default 1
+
+config CDU0_CLKO7
+	default 5
+
+config CDU0_CLKO8
+	default 1
+
+config CDU0_CLKO9
+	default 1
+
+endif
diff --git a/board/adi/sc589-ezkit/sc589-ezkit.env b/board/adi/sc589-ezkit/sc589-ezkit.env
new file mode 100644
index 00000000000..34b924992ac
--- /dev/null
+++ b/board/adi/sc589-ezkit/sc589-ezkit.env
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later+ */
+
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <env/adi/adi_boot.env>
+
+adi_stage2_offset=0x20000
+adi_image_offset=0xE0000
+adi_rfs_offset=0x6E0000
+loadaddr=0xC3000000
+jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-ezkit.jffs2
diff --git a/board/adi/sc589-mini/Kconfig b/board/adi/sc589-mini/Kconfig
new file mode 100644
index 00000000000..8f723f30dde
--- /dev/null
+++ b/board/adi/sc589-mini/Kconfig
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2024 - Analog Devices, Inc.
+
+if TARGET_SC589_MINI
+
+config LDR_CPU
+	default	"ADSP-SC589-0.1"
+
+config SYS_BOARD
+	default "sc589-mini"
+
+config SYS_CONFIG_NAME
+	default "sc589"
+
+config DEFAULT_DEVICE_TREE
+	default "sc589-mini"
+
+config ADI_IMAGE
+	default "minimal"
+
+config CUSTOM_SYS_INIT_SP_ADDR
+	default 0xC203f000
+
+# SPI Flash
+
+config SF_DEFAULT_BUS
+	default 2
+
+config SF_DEFAULT_CS
+	default 1
+
+config SF_DEFAULT_SPEED
+	default 5000000
+
+# Clocks
+
+config CGU0_DF_DIV
+	default 0
+
+config CGU0_VCO_MULT
+	default 18
+
+config CGU0_CCLK_DIV
+	default 1
+
+config CGU0_SCLK_DIV
+	default 2
+
+config CGU0_SCLK0_DIV
+	default 2
+
+config CGU0_SCLK1_DIV
+	default 2
+
+config CGU0_DCLK_DIV
+	default 1
+
+config CGU0_OCLK_DIV
+	default 3
+
+config CGU1_VCO_MULT
+	default 5
+
+config CGU1_DF_DIV
+	default 0
+
+config CGU1_CCLK_DIV
+	default 1
+
+config CGU1_SCLK_DIV
+	default 2
+
+config CGU1_SCLK0_DIV
+	default 2
+
+config CGU1_SCLK1_DIV
+	default 2
+
+config CGU1_DCLK_DIV
+	default 2
+
+config CGU1_OCLK_DIV
+	default 3
+
+config CDU0_CLKO0
+	default 1
+
+config CDU0_CLKO1
+	default 1
+
+config CDU0_CLKO2
+	default 1
+
+config CDU0_CLKO3
+	default 1
+
+config CDU0_CLKO4
+	default 1
+
+config CDU0_CLKO5
+	default 1
+
+config CDU0_CLKO6
+	default 1
+
+config CDU0_CLKO7
+	default 5
+
+config CDU0_CLKO8
+	default 1
+
+config CDU0_CLKO9
+	default 1
+
+endif
diff --git a/board/adi/sc589-mini/sc589-mini.env b/board/adi/sc589-mini/sc589-mini.env
new file mode 100644
index 00000000000..0f3f0bd28e9
--- /dev/null
+++ b/board/adi/sc589-mini/sc589-mini.env
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later+ */
+
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <env/adi/adi_boot.env>
+
+adi_stage2_offset=0x20000
+adi_image_offset=0xE0000
+adi_rfs_offset=0x8E0000
+loadaddr=0xC3000000
+jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-mini.jffs2
diff --git a/board/adi/sc594-som-ezkit/Kconfig b/board/adi/sc594-som-ezkit/Kconfig
new file mode 100644
index 00000000000..ff9231b393c
--- /dev/null
+++ b/board/adi/sc594-som-ezkit/Kconfig
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2024 - Analog Devices, Inc.
+
+if TARGET_SC594_SOM_EZKIT
+
+config LDR_CPU
+	default "ADSP-SC594-0.0"
+
+config SYS_BOARD
+	default "sc594-som-ezkit"
+
+config SYS_CONFIG_NAME
+	default "sc594-som"
+
+config DEFAULT_DEVICE_TREE
+	default "sc594-som-ezkit"
+
+config ADI_IMAGE
+	default "minimal"
+
+config CUSTOM_SYS_INIT_SP_ADDR
+	default 0xA003f000
+
+# SPL
+
+config SPL_OF_LIBFDT_ASSUME_MASK
+	default 0x0
+
+# SPI Flash
+
+config SF_DEFAULT_BUS
+	default 2
+
+config SF_DEFAULT_CS
+	default 1
+
+config SF_DEFAULT_SPEED
+	default 10000000
+
+# Clocks
+
+config CGU0_DF_DIV
+	default 0
+
+config CGU0_VCO_MULT
+	default 80
+
+config CGU0_CCLK_DIV
+	default 2
+
+config CGU0_SCLK_DIV
+	default 4
+
+config CGU0_SCLK0_DIV
+	default 4
+
+config CGU0_SCLK1_DIV
+	default 2
+
+config CGU0_DCLK_DIV
+	default 2
+
+config CGU0_OCLK_DIV
+	default 16
+
+config CGU0_DIV_S1SELEX
+	default 6
+
+config CGU1_VCO_MULT
+	default 64
+
+config CGU1_DF_DIV
+	default 0
+
+config CGU1_CCLK_DIV
+	default 2
+
+config CGU1_SCLK_DIV
+	default 4
+
+config CGU1_SCLK0_DIV
+	default 4
+
+config CGU1_SCLK1_DIV
+	default 2
+
+config CGU1_DCLK_DIV
+	default 2
+
+config CGU1_OCLK_DIV
+	default 16
+
+config CGU1_DIV_S1SELEX
+	default 6
+
+config CDU0_CLKO0
+	default 1
+
+config CDU0_CLKO1
+	default 1
+
+config CDU0_CLKO2
+	default 1
+
+config CDU0_CLKO3
+	default 3
+
+config CDU0_CLKO4
+	default 3
+
+config CDU0_CLKO5
+	default 1
+
+config CDU0_CLKO6
+	default 1
+
+config CDU0_CLKO7
+	default 1
+
+config CDU0_CLKO8
+	default 3
+
+config CDU0_CLKO9
+	default 1
+
+config CDU0_CLKO10
+	default 1
+
+config CDU0_CLKO12
+	default 1
+
+endif
diff --git a/board/adi/sc594-som-ezkit/sc594-som-ezkit.env b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
new file mode 100644
index 00000000000..83d6b457a08
--- /dev/null
+++ b/board/adi/sc594-som-ezkit/sc594-som-ezkit.env
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later+ */
+
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <env/adi/adi_boot.env>
+
+adi_stage2_offset=0x40000
+adi_image_offset=0x0120000
+adi_rfs_offset=0x1020000
+loadaddr=0xA2000000
+jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc594-som-ezkit.jffs2
diff --git a/board/adi/sc594-som-ezlite/Kconfig b/board/adi/sc594-som-ezlite/Kconfig
new file mode 100644
index 00000000000..70436955b66
--- /dev/null
+++ b/board/adi/sc594-som-ezlite/Kconfig
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2024 - Analog Devices, Inc.
+
+if TARGET_SC594_SOM_EZLITE
+
+config LDR_CPU
+	default "ADSP-SC594-0.0"
+
+config SYS_BOARD
+	default "sc594-som-ezlite"
+
+config SYS_CONFIG_NAME
+	default "sc594-som"
+
+config DEFAULT_DEVICE_TREE
+	default "sc594-som-ezlite"
+
+config ADI_IMAGE
+	default "minimal"
+
+config CUSTOM_SYS_INIT_SP_ADDR
+	default 0x8203f000
+
+# SPL
+
+config SPL_OF_LIBFDT_ASSUME_MASK
+	default 0x0
+
+# SPI Flash
+
+config SF_DEFAULT_BUS
+	default 2
+
+config SF_DEFAULT_CS
+	default 1
+
+config SF_DEFAULT_SPEED
+	default 10000000
+
+# Clocks
+
+config CGU0_DF_DIV
+	default 0
+
+config CGU0_VCO_MULT
+	default 80
+
+config CGU0_CCLK_DIV
+	default 2
+
+config CGU0_SCLK_DIV
+	default 4
+
+config CGU0_SCLK0_DIV
+	default 4
+
+config CGU0_SCLK1_DIV
+	default 2
+
+config CGU0_DCLK_DIV
+	default 2
+
+config CGU0_OCLK_DIV
+	default 16
+
+config CGU0_DIV_S1SELEX
+	default 6
+
+config CGU1_VCO_MULT
+	default 64
+
+config CGU1_DF_DIV
+	default 0
+
+config CGU1_CCLK_DIV
+	default 2
+
+config CGU1_SCLK_DIV
+	default 4
+
+config CGU1_SCLK0_DIV
+	default 4
+
+config CGU1_SCLK1_DIV
+	default 2
+
+config CGU1_DCLK_DIV
+	default 2
+
+config CGU1_OCLK_DIV
+	default 16
+
+config CGU1_DIV_S1SELEX
+	default 6
+
+config CDU0_CLKO0
+	default 1
+
+config CDU0_CLKO1
+	default 1
+
+config CDU0_CLKO2
+	default 1
+
+config CDU0_CLKO3
+	default 3
+
+config CDU0_CLKO4
+	default 3
+
+config CDU0_CLKO5
+	default 1
+
+config CDU0_CLKO6
+	default 1
+
+config CDU0_CLKO7
+	default 1
+
+config CDU0_CLKO8
+	default 3
+
+config CDU0_CLKO9
+	default 1
+
+config CDU0_CLKO10
+	default 1
+
+config CDU0_CLKO12
+	default 1
+
+endif
diff --git a/board/adi/sc594-som-ezlite/sc594-som-ezlite.env b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
new file mode 100644
index 00000000000..152e1f14fdf
--- /dev/null
+++ b/board/adi/sc594-som-ezlite/sc594-som-ezlite.env
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later+ */
+
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <env/adi/adi_boot.env>
+
+adi_stage2_offset=0x40000
+adi_image_offset=0x0120000
+adi_rfs_offset=0x1020000
+loadaddr=0xA2000000
+jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc594-som-ezlite.jffs2
diff --git a/board/adi/sc598-som-ezkit/Kconfig b/board/adi/sc598-som-ezkit/Kconfig
new file mode 100644
index 00000000000..9abecbe1dde
--- /dev/null
+++ b/board/adi/sc598-som-ezkit/Kconfig
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2024 - Analog Devices, Inc.
+
+if TARGET_SC598_SOM_EZKIT
+
+config LDR_CPU
+	default "ADSP-SC598-0.0"
+
+config SYS_BOARD
+	default "sc598-som-ezkit"
+
+config SYS_CONFIG_NAME
+	default "sc598-som"
+
+config DEFAULT_DEVICE_TREE
+	default "sc598-som-ezkit"
+
+config ADI_IMAGE
+	default "minimal"
+
+config CUSTOM_SYS_INIT_SP_ADDR
+	default 0x96000000
+
+# SPL
+
+config SPL_OF_LIBFDT_ASSUME_MASK
+	default 0x0
+
+# SPI Flash
+
+config SF_DEFAULT_BUS
+	default 2
+
+config SF_DEFAULT_CS
+	default 1
+
+config SF_DEFAULT_SPEED
+	default 10000000
+
+# Clock Configs
+
+config CGU0_DF_DIV
+	default 0
+
+config CGU0_VCO_MULT
+	default 80
+
+config CGU0_CCLK_DIV
+	default 2
+
+config CGU0_SCLK_DIV
+	default 4
+
+config CGU0_SCLK0_DIV
+	default 4
+
+config CGU0_SCLK1_DIV
+	default 2
+
+config CGU0_DCLK_DIV
+	default 3
+
+config CGU0_OCLK_DIV
+	default 8
+
+config CGU0_DIV_S1SELEX
+	default 6
+
+config CGU1_VCO_MULT
+	default 72
+
+config CGU1_DF_DIV
+	default 0
+
+config CGU1_CCLK_DIV
+	default 16
+
+config CGU1_SCLK_DIV
+	default 8
+
+config CGU1_SCLK0_DIV
+	default 4
+
+config CGU1_SCLK1_DIV
+	default 2
+
+config CGU1_DCLK_DIV
+	default 18
+
+config CGU1_OCLK_DIV
+	default 16
+
+config CGU1_DIV_S0SELEX
+	default 36
+
+config CGU1_DIV_S1SELEX
+	default 90
+
+endif
diff --git a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
new file mode 100644
index 00000000000..242436c1600
--- /dev/null
+++ b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later+ */
+
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <env/adi/adi_boot.env>
+
+adi_stage2_offset=0x40000
+adi_image_offset=0x01a0000
+adi_rfs_offset=0x1020000
+loadaddr=0x90000000
+jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezkit.jffs2
diff --git a/board/adi/sc598-som-ezlite/Kconfig b/board/adi/sc598-som-ezlite/Kconfig
new file mode 100644
index 00000000000..3312316ebdf
--- /dev/null
+++ b/board/adi/sc598-som-ezlite/Kconfig
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2024 - Analog Devices, Inc.
+
+if TARGET_SC598_SOM_EZLITE
+
+config LDR_CPU
+	default "ADSP-SC598-0.0"
+
+config SYS_BOARD
+	default "sc598-som-ezlite"
+
+config SYS_CONFIG_NAME
+	default "sc598-som"
+
+config DEFAULT_DEVICE_TREE
+	default "sc598-som-ezlite"
+
+config ADI_IMAGE
+	default "minimal"
+
+config CUSTOM_SYS_INIT_SP_ADDR
+	default 0x96000000
+
+# SPL
+
+config SPL_OF_LIBFDT_ASSUME_MASK
+	default 0x0
+
+# SPI Flash
+
+config SF_DEFAULT_BUS
+	default 2
+
+config SF_DEFAULT_CS
+	default 1
+
+config SF_DEFAULT_SPEED
+	default 10000000
+
+# Clock Configs
+
+config CGU0_DF_DIV
+	default 0
+
+config CGU0_VCO_MULT
+	default 80
+
+config CGU0_CCLK_DIV
+	default 2
+
+config CGU0_SCLK_DIV
+	default 4
+
+config CGU0_SCLK0_DIV
+	default 4
+
+config CGU0_SCLK1_DIV
+	default 2
+
+config CGU0_DCLK_DIV
+	default 3
+
+config CGU0_OCLK_DIV
+	default 8
+
+config CGU0_DIV_S1SELEX
+	default 6
+
+config CGU1_VCO_MULT
+	default 72
+
+config CGU1_DF_DIV
+	default 0
+
+config CGU1_CCLK_DIV
+	default 16
+
+config CGU1_SCLK_DIV
+	default 8
+
+config CGU1_SCLK0_DIV
+	default 4
+
+config CGU1_SCLK1_DIV
+	default 2
+
+config CGU1_DCLK_DIV
+	default 18
+
+config CGU1_OCLK_DIV
+	default 16
+
+config CGU1_DIV_S0SELEX
+	default 36
+
+config CGU1_DIV_S1SELEX
+	default 90
+
+endif
diff --git a/board/adi/sc598-som-ezlite/sc598-som-ezlite.env b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
new file mode 100644
index 00000000000..036c9ae7590
--- /dev/null
+++ b/board/adi/sc598-som-ezlite/sc598-som-ezlite.env
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later+ */
+
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#include <env/adi/adi_boot.env>
+
+adi_stage2_offset=0x40000
+adi_image_offset=0x01a0000
+adi_rfs_offset=0x1020000
+loadaddr=0x90000000
+jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezlite.jffs2
diff --git a/board/amlogic/odroid-go-ultra/odroid-go-ultra.c b/board/amlogic/odroid-go-ultra/odroid-go-ultra.c
index 8f3f2045d74..f9412071737 100644
--- a/board/amlogic/odroid-go-ultra/odroid-go-ultra.c
+++ b/board/amlogic/odroid-go-ultra/odroid-go-ultra.c
@@ -16,7 +16,5 @@ int mmc_get_env_dev(void)
 
 int board_init(void)
 {
-	regulators_enable_boot_on(_DEBUG);
-
 	return 0;
 }
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index 3bd94d0889d..af486e977e5 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -125,7 +125,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
 		      2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct atmel_mpddrc_config ddr2;
 
diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
index afc0c0520e1..6f9abcbb127 100644
--- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@@ -167,7 +167,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
 		      2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index e5688c6cf13..f52b9a97731 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -181,7 +181,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
 		      2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
diff --git a/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c b/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c
index 36995a927cf..cb3cd7ac9ae 100644
--- a/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c
+++ b/board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c
@@ -146,7 +146,7 @@ static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
 		      (8 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET));
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
diff --git a/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c b/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c
index c775d593e58..15cbd0daa6f 100644
--- a/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c
+++ b/board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c
@@ -208,7 +208,7 @@ static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
 	ddrc->cal_mr4 |= ATMEL_MPDDRC_CAL_MR4_MR4R(0xFFFE);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
diff --git a/board/atmel/sama5d2_icp/sama5d2_icp.c b/board/atmel/sama5d2_icp/sama5d2_icp.c
index 986da01639f..6f0d578abf7 100644
--- a/board/atmel/sama5d2_icp/sama5d2_icp.c
+++ b/board/atmel/sama5d2_icp/sama5d2_icp.c
@@ -180,7 +180,7 @@ static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
 		      (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET));
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index c8a8eb49826..d104736fa7c 100644
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -146,7 +146,7 @@ static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
 		      7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
index 54cc3c4d900..f98322fb540 100644
--- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c
+++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c
@@ -175,7 +175,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
 		      8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct atmel_mpddrc_config ddr2;
 
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index f2e1242fcb0..28079a81517 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -241,7 +241,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
 		      8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct atmel_mpddrc_config ddr2;
 
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 09ca16ca88c..f9112fc5321 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -184,7 +184,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
 		      8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct atmel_mpddrc_config ddr2;
 
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c
index 1f8b85f0614..0bdc6adbdc8 100644
--- a/board/atmel/sama5d4ek/sama5d4ek.c
+++ b/board/atmel/sama5d4ek/sama5d4ek.c
@@ -169,7 +169,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
 		      8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct atmel_mpddrc_config ddr2;
 	const struct atmel_mpddr *mpddr = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
diff --git a/board/beagle/beagleplay/beagleplay.env b/board/beagle/beagleplay/beagleplay.env
index 354bc987d12..fc29d49712d 100644
--- a/board/beagle/beagleplay/beagleplay.env
+++ b/board/beagle/beagleplay/beagleplay.env
@@ -17,3 +17,33 @@ bootdir=/boot
 boot_targets=mmc1 mmc0
 bootmeths=script extlinux efi pxe
 rd_spec=-
+
+#if CONFIG_BOOTMETH_ANDROID
+#include <env/ti/android.env>
+/* Override Android partitions
+ * Required because tiboot3 is in mmc0boot0, not in UDA
+ * note that += is needed because \n is converted by space in .env files */
+partitions=
+       name=bootloader,start=5M,size=8M,uuid=${uuid_gpt_bootloader};
+partitions+=name=misc,start=13824K,size=512K,uuid=${uuid_gpt_misc};
+partitions+=name=frp,size=512K,uuid=${uuid_gpt_frp};
+partitions+=name=boot_a,size=40M,uuid=${uuid_gpt_boot_a};
+partitions+=name=boot_b,size=40M,uuid=${uuid_gpt_boot_b};
+partitions+=name=vendor_boot_a,size=32M,uuid=${uuid_gpt_vendor_boot_a};
+partitions+=name=vendor_boot_b,size=32M,uuid=${uuid_gpt_vendor_boot_b};
+partitions+=name=init_boot_a,size=8M,uuid=${uuid_gpt_init_boot_a};
+partitions+=name=init_boot_b,size=8M,uuid=${uuid_gpt_init_boot_b};
+partitions+=name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a};
+partitions+=name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b};
+partitions+=name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a};
+partitions+=name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b};
+partitions+=name=vbmeta_vendor_dlkm_a,size=64K,uuid=${uuid_gpt_vbmeta_vendor_dlkm_a};
+partitions+=name=vbmeta_vendor_dlkm_b,size=64K,uuid=${uuid_gpt_vbmeta_vendor_dlkm_b};
+partitions+=name=super,size=4608M,uuid=${uuid_gpt_super};
+partitions+=name=metadata,size=64M,uuid=${uuid_gpt_metadata};
+partitions+=name=persist,size=32M,uuid=${uuid_gpt_persist};
+partitions+=name=userdata,size=-,uuid=${uuid_gpt_userdata}
+fastboot_raw_partition_tiboot3="0x0 0x800 mmcpart 1"
+
+adtb_idx=2
+#endif
diff --git a/board/cobra5272/flash.c b/board/cobra5272/flash.c
index f16f2f1184f..7d81036647e 100644
--- a/board/cobra5272/flash.c
+++ b/board/cobra5272/flash.c
@@ -135,22 +135,22 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 {
 	ulong result;
 	int iflag, cflag, prot, sect;
-	int rc = ERR_OK;
+	int rc = FL_ERR_OK;
 	int chip1;
 	ulong start;
 
 	/* first look for protection bits */
 
 	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
+		return FL_ERR_UNKNOWN_FLASH_TYPE;
 
 	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
+		return FL_ERR_INVAL;
 	}
 
 	if ((info->flash_id & FLASH_VENDMASK) !=
 	    (AMD_MANUFACT & FLASH_VENDMASK)) {
-		return ERR_UNKNOWN_FLASH_VENDOR;
+		return FL_ERR_UNKNOWN_FLASH_VENDOR;
 	}
 
 	prot = 0;
@@ -160,7 +160,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 		}
 	}
 	if (prot)
-		return ERR_PROTECTED;
+		return FL_ERR_PROTECTED;
 
 	/*
 	 * Disable interrupts which might cause a timeout
@@ -217,11 +217,11 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 
 			if (chip1 == ERR) {
-				rc = ERR_PROG_ERROR;
+				rc = FL_ERR_PROG_ERROR;
 				goto outahere;
 			}
 			if (chip1 == TMO) {
-				rc = ERR_TIMEOUT;
+				rc = FL_ERR_TIMEOUT;
 				goto outahere;
 			}
 
@@ -252,7 +252,7 @@ static int write_word(flash_info_t *info, ulong dest, ulong data)
 {
 	volatile u16 *addr = (volatile u16 *) dest;
 	ulong result;
-	int rc = ERR_OK;
+	int rc = FL_ERR_OK;
 	int cflag, iflag;
 	int chip1;
 	ulong start;
@@ -262,7 +262,7 @@ static int write_word(flash_info_t *info, ulong dest, ulong data)
 	 */
 	result = *addr;
 	if ((result & data) != data)
-		return ERR_NOT_ERASED;
+		return FL_ERR_NOT_ERASED;
 
 	/*
 	 * Disable interrupts which might cause a timeout
@@ -302,7 +302,7 @@ static int write_word(flash_info_t *info, ulong dest, ulong data)
 	*addr = CMD_READ_ARRAY;
 
 	if (chip1 == ERR || *addr != data)
-		rc = ERR_PROG_ERROR;
+		rc = FL_ERR_PROG_ERROR;
 
 	if (iflag)
 		enable_interrupts();
@@ -320,13 +320,13 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 
 	if (addr & 1) {
 		printf ("unaligned destination not supported\n");
-		return ERR_ALIGN;
+		return FL_ERR_ALIGN;
 	}
 
 #if 0
 	if (cnt & 1) {
 		printf ("odd transfer sizes not supported\n");
-		return ERR_ALIGN;
+		return FL_ERR_ALIGN;
 	}
 #endif
 
@@ -364,5 +364,5 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		cnt -= 1;
 	}
 
-	return ERR_OK;
+	return FL_ERR_OK;
 }
diff --git a/board/conclusive/kstr-sama5d27/kstr-sama5d27.c b/board/conclusive/kstr-sama5d27/kstr-sama5d27.c
index 64282ae9dc7..37750137ad9 100644
--- a/board/conclusive/kstr-sama5d27/kstr-sama5d27.c
+++ b/board/conclusive/kstr-sama5d27/kstr-sama5d27.c
@@ -182,7 +182,7 @@ static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
 		      (8 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET));
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 	struct atmel_mpddr *mpddrc = (struct atmel_mpddr *)ATMEL_BASE_MPDDRC;
diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c
index c8dd30dfeaf..f2b14bf701a 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6.c
@@ -30,6 +30,7 @@
 #include <fuse.h>
 #include <i2c_eeprom.h>
 #include <mmc.h>
+#include <power/regulator.h>
 #include <usb.h>
 #include <linux/delay.h>
 #include <usb/ehci-ci.h>
diff --git a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
index c635735d89c..78aae412350 100644
--- a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
+++ b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
@@ -14,6 +14,7 @@
 #include <malloc.h>
 #include <net.h>
 #include <miiphy.h>
+#include <power/regulator.h>
 
 #include "lpddr4_timing.h"
 #include "../common/dh_common.h"
diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
index 4f4f537fee5..24c5f37c12f 100644
--- a/board/dhelectronics/dh_stm32mp1/board.c
+++ b/board/dhelectronics/dh_stm32mp1/board.c
@@ -622,8 +622,6 @@ static void board_init_regulator_av96(void)
 static void board_init_regulator(void)
 {
 	board_init_regulator_av96();
-
-	regulators_enable_boot_on(_DEBUG);
 }
 #else
 static inline int board_get_regulator_buck3_nvm_uv_av96(int *uv)
diff --git a/board/engicam/stm32mp1/stm32mp1.c b/board/engicam/stm32mp1/stm32mp1.c
index bc2af66d8e9..56557d56429 100644
--- a/board/engicam/stm32mp1/stm32mp1.c
+++ b/board/engicam/stm32mp1/stm32mp1.c
@@ -37,9 +37,6 @@ int checkboard(void)
 /* board dependent setup after realloc */
 int board_init(void)
 {
-	if (IS_ENABLED(CONFIG_DM_REGULATOR))
-		regulators_enable_boot_on(_DEBUG);
-
 	return 0;
 }
 
diff --git a/board/freescale/m5253demo/flash.c b/board/freescale/m5253demo/flash.c
index 334518a4bc9..ab5d2ebff64 100644
--- a/board/freescale/m5253demo/flash.c
+++ b/board/freescale/m5253demo/flash.c
@@ -72,7 +72,7 @@ int flash_get_offsets(ulong base, flash_info_t * info)
 		}
 	}
 
-	return ERR_OK;
+	return FL_ERR_OK;
 }
 
 void flash_print_info(flash_info_t * info)
@@ -369,9 +369,9 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	}
 
 	if (cnt == 0)
-		return ERR_OK;
+		return FL_ERR_OK;
 
-	return ERR_OK;
+	return FL_ERR_OK;
 }
 
 /*-----------------------------------------------------------------------
diff --git a/board/gardena/smart-gateway-at91sam/spl.c b/board/gardena/smart-gateway-at91sam/spl.c
index fb3ec48f9c5..db9ba881884 100644
--- a/board/gardena/smart-gateway-at91sam/spl.c
+++ b/board/gardena/smart-gateway-at91sam/spl.c
@@ -110,7 +110,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
 		      2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
diff --git a/board/google/veyron/veyron.c b/board/google/veyron/veyron.c
index bd8ce633772..674f19ba03c 100644
--- a/board/google/veyron/veyron.c
+++ b/board/google/veyron/veyron.c
@@ -57,10 +57,6 @@ static int veyron_init(void)
 	if (ret)
 		return log_msg_ret("s33", ret);
 
-	ret = regulators_enable_boot_on(false);
-	if (ret)
-		return log_msg_ret("boo", ret);
-
 	return 0;
 }
 #endif
diff --git a/board/rockchip/evb_rk3399/README b/board/rockchip/evb_rk3399/README
index c6f58203ebe..de9509e8439 100644
--- a/board/rockchip/evb_rk3399/README
+++ b/board/rockchip/evb_rk3399/README
@@ -31,7 +31,7 @@ Get the Source and prebuild binary
 
   > mkdir ~/evb_rk3399
   > cd ~/evb_rk3399
-  > git clone https://github.com/ARM-software/arm-trusted-firmware.git
+  > git clone https://github.com/TrustedFirmware-A/trusted-firmware-a.git
   > git clone https://github.com/rockchip-linux/rkbin.git
   > git clone https://github.com/rockchip-linux/rkdeveloptool.git
 
@@ -39,7 +39,7 @@ Get the Source and prebuild binary
 Compile ATF
 ===========
 
-  > cd arm-trusted-firmware
+  > cd trusted-firmware-a
   > make realclean
   > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
 
@@ -91,7 +91,7 @@ Package the image for U-Boot SPL(option 1)
 Package the image for Rockchip miniloader(option 2)
 ------------------------------------------
   > cd ..
-  > cp arm-trusted-firmware/build/rk3399/release/bl31.elf rkbin/rk33
+  > cp trusted-firmware-a/build/rk3399/release/bl31.elf rkbin/rk33
   > ./rkbin/tools/trust_merger rkbin/tools/RK3399TRUST.ini
   > ./rkbin/tools/loaderimage --pack --uboot u-boot/u-boot-dtb.bin uboot.img
 
diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c
index 56862bcb34d..68edd1ec282 100644
--- a/board/samsung/common/exynos5-dt.c
+++ b/board/samsung/common/exynos5-dt.c
@@ -88,10 +88,6 @@ int exynos_power_init(void)
 	if (ret == -ENODEV)
 		return 0;
 
-	ret = regulators_enable_boot_on(false);
-	if (ret)
-		return ret;
-
 	ret = exynos_set_regulator("vdd_mif", 1100000);
 	if (ret)
 		return ret;
diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index 7d73d1f2b36..cd27fc1cc37 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -187,7 +187,7 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
 		      2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct atmel_mpddrc_config ddr2;
 
diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c
index 946fbc3f229..e9e4bc348cb 100644
--- a/board/siemens/smartweb/smartweb.c
+++ b/board/siemens/smartweb/smartweb.c
@@ -238,7 +238,7 @@ void at91_spl_board_init(void)
 			 | AT91_SDRAMC_TRP_VAL(2) | AT91_SDRAMC_TRCD_VAL(2) \
 			 | AT91_SDRAMC_TRAS_VAL(5) | AT91_SDRAMC_TXSR_VAL(8))
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	struct at91_matrix *ma = (struct at91_matrix *)ATMEL_BASE_MATRIX;
 	struct at91_port *port = (struct at91_port *)ATMEL_BASE_PIOC;
diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c
index bda12a97708..3764ab48ab3 100644
--- a/board/siemens/taurus/taurus.c
+++ b/board/siemens/taurus/taurus.c
@@ -177,7 +177,7 @@ void sdramc_configure(unsigned int mask)
 	sdramc_initialize(ATMEL_BASE_CS1, &setting);
 }
 
-void mem_init(void)
+void at91_mem_init(void)
 {
 	unsigned int ram_size = 0;
 
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 97532a8156f..d5e5e776d2a 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -665,8 +665,6 @@ int board_init(void)
 	if (board_is_stm32mp15x_dk2())
 		board_stm32mp15x_dk2_init();
 
-	regulators_enable_boot_on(_DEBUG);
-
 	/*
 	 * sysconf initialisation done only when U-Boot is running in secure
 	 * done in TF-A for TFABOOT.
diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64
index 4803bc9ff2f..125a2e88e09 100644
--- a/board/sunxi/README.sunxi64
+++ b/board/sunxi/README.sunxi64
@@ -12,7 +12,7 @@ file describes how to make full use of the 64-bit capabilities.
 Quick Start / Overview
 ======================
 - Build the ARM Trusted Firmware binary (see "ARM Trusted Firmware (ATF)" below)
-  $ cd /src/arm-trusted-firmware
+  $ cd /src/trusted-firmware-a
   $ make PLAT=sun50i_a64 DEBUG=1 bl31
 - Build the SCP firmware binary (see "SCP firmware (Crust)" below)
   $ cd /src/crust
@@ -49,7 +49,7 @@ $ make PLAT=sun50i_a64 DEBUG=1 bl31
 The resulting binary is build/sun50i_a64/debug/bl31.bin. Either put the
 location of this file into the BL31 environment variable or copy this to
 the root of your U-Boot build directory (or create a symbolic link).
-$ export BL31=/src/arm-trusted-firmware/build/sun50i_a64/debug/bl31.bin
+$ export BL31=/src/trusted-firmware-a/build/sun50i_a64/debug/bl31.bin
   (adjust the actual path accordingly)
 The platform target "sun50i_a64" covers all boards with either an Allwinner
 A64 or H5 SoC (since they are very similar). For boards with an Allwinner H6
@@ -211,6 +211,6 @@ Then write this image to a microSD card, replacing /dev/sdx with the right
 device file (see above):
 $ dd if=firmware.img of=/dev/sdx bs=8k seek=1
 
-[1] https://github.com/ARM-software/arm-trusted-firmware.git
+[1] https://github.com/TrustedFirmware-A/trusted-firmware-a.git
 [2] git://github.com/linux-sunxi/sunxi-tools.git
 [3] https://github.com/apritzel/pine64/
diff --git a/board/ti/am62px/am62px.env b/board/ti/am62px/am62px.env
index f8b6aff2c2f..7ef54079aa8 100644
--- a/board/ti/am62px/am62px.env
+++ b/board/ti/am62px/am62px.env
@@ -13,3 +13,8 @@ mmcdev=1
 bootpart=1:2
 bootdir=/boot
 rd_spec=-
+
+#if CONFIG_BOOTMETH_ANDROID
+#include <env/ti/android.env>
+adtb_idx=3
+#endif
\ No newline at end of file
diff --git a/board/ti/am62x/am62x.env b/board/ti/am62x/am62x.env
index 09b9b16a3e5..078cc4b5ac9 100644
--- a/board/ti/am62x/am62x.env
+++ b/board/ti/am62x/am62x.env
@@ -19,3 +19,8 @@ splashfile=ti_logo_414x97_32bpp.bmp.gz
 splashimage=0x80200000
 splashpos=m,m
 splashsource=sf
+
+#if CONFIG_BOOTMETH_ANDROID
+#include <env/ti/android.env>
+adtb_idx=0
+#endif
\ No newline at end of file
diff --git a/board/ti/j722s/rm-cfg.yaml b/board/ti/j722s/rm-cfg.yaml
index 21ca30104c7..e32beb84795 100644
--- a/board/ti/j722s/rm-cfg.yaml
+++ b/board/ti/j722s/rm-cfg.yaml
@@ -244,7 +244,7 @@ rm-cfg:
             subhdr:
                 magic: 0x7B25
                 size: 8
-            resasg_entries_size: 1160
+            resasg_entries_size: 1184
             reserved: 0
     resasg_entries:
         -
@@ -1017,13 +1017,13 @@ rm-cfg:
             reserved: 0
         -
             start_resource: 8
-            num_resource: 12
+            num_resource: 32
             type: 12750
             host_id: 12
             reserved: 0
         -
-            start_resource: 20
-            num_resource: 20
+            start_resource: 8
+            num_resource: 32
             type: 12750
             host_id: 38
             reserved: 0
@@ -1035,13 +1035,13 @@ rm-cfg:
             reserved: 0
         -
             start_resource: 0
-            num_resource: 12
+            num_resource: 32
             type: 12769
             host_id: 12
             reserved: 0
         -
-            start_resource: 12
-            num_resource: 20
+            start_resource: 0
+            num_resource: 32
             type: 12769
             host_id: 38
             reserved: 0
@@ -1053,11 +1053,23 @@ rm-cfg:
             reserved: 0
         -
             start_resource: 0
-            num_resource: 8
+            num_resource: 2
             type: 12810
             host_id: 12
             reserved: 0
         -
+            start_resource: 2
+            num_resource: 2
+            type: 12810
+            host_id: 20
+            reserved: 0
+        -
+            start_resource: 4
+            num_resource: 2
+            type: 12810
+            host_id: 22
+            reserved: 0
+        -
             start_resource: 22
             num_resource: 18
             type: 12810
@@ -1065,21 +1077,27 @@ rm-cfg:
             reserved: 0
         -
             start_resource: 12288
-            num_resource: 64
+            num_resource: 56
             type: 12813
             host_id: 12
             reserved: 0
         -
-            start_resource: 12352
-            num_resource: 64
+            start_resource: 12344
+            num_resource: 48
             type: 12813
-            host_id: 38
+            host_id: 20
             reserved: 0
         -
-            start_resource: 12416
-            num_resource: 88
+            start_resource: 12392
+            num_resource: 48
             type: 12813
-            host_id: 128
+            host_id: 22
+            reserved: 0
+        -
+            start_resource: 12440
+            num_resource: 64
+            type: 12813
+            host_id: 38
             reserved: 0
         -
             start_resource: 1536
diff --git a/board/ti/j722s/tifs-rm-cfg.yaml b/board/ti/j722s/tifs-rm-cfg.yaml
index 5e8d7e04441..4a2af0ebcaf 100644
--- a/board/ti/j722s/tifs-rm-cfg.yaml
+++ b/board/ti/j722s/tifs-rm-cfg.yaml
@@ -244,7 +244,7 @@ tifs-rm-cfg:
             subhdr:
                 magic: 0x7B25
                 size: 8
-            resasg_entries_size: 976
+            resasg_entries_size: 992
             reserved: 0
     resasg_entries:
         -
@@ -897,13 +897,13 @@ tifs-rm-cfg:
                 reserved: 0
         -
                 start_resource: 8
-                num_resource: 12
+                num_resource: 32
                 type: 12750
                 host_id: 12
                 reserved: 0
         -
-                start_resource: 20
-                num_resource: 20
+                start_resource: 8
+                num_resource: 32
                 type: 12750
                 host_id: 38
                 reserved: 0
@@ -915,13 +915,13 @@ tifs-rm-cfg:
                 reserved: 0
         -
                 start_resource: 0
-                num_resource: 12
+                num_resource: 32
                 type: 12769
                 host_id: 12
                 reserved: 0
         -
-                start_resource: 12
-                num_resource: 20
+                start_resource: 0
+                num_resource: 32
                 type: 12769
                 host_id: 38
                 reserved: 0
@@ -933,11 +933,23 @@ tifs-rm-cfg:
                 reserved: 0
         -
                 start_resource: 0
-                num_resource: 8
+                num_resource: 2
                 type: 12810
                 host_id: 12
                 reserved: 0
         -
+                start_resource: 2
+                num_resource: 2
+                type: 12810
+                host_id: 20
+                reserved: 0
+        -
+                start_resource: 4
+                num_resource: 2
+                type: 12810
+                host_id: 22
+                reserved: 0
+        -
                 start_resource: 22
                 num_resource: 18
                 type: 12810
diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index 1c100d61589..5e5eb49ddf3 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -425,28 +425,25 @@ int board_late_init_xilinx(void)
 	struct xilinx_board_description *desc;
 	phys_size_t bootm_size = gd->ram_top - gd->ram_base;
 	u64 bootscr_flash_offset, bootscr_flash_size;
-
-	if (!IS_ENABLED(CONFIG_MICROBLAZE)) {
-		ulong scriptaddr;
-		u64 bootscr_address;
-		u64 bootscr_offset;
-
-		/* Fetch bootscr_address/bootscr_offset from DT and update */
-		if (!ofnode_read_bootscript_address(&bootscr_address,
-						    &bootscr_offset)) {
-			if (bootscr_offset)
-				ret |= env_set_hex("scriptaddr",
-						   gd->ram_base +
-						   bootscr_offset);
-			else
-				ret |= env_set_hex("scriptaddr",
-						   bootscr_address);
-		} else {
-			/* Update scriptaddr(bootscr offset) from env */
-			scriptaddr = env_get_hex("scriptaddr", 0);
+	ulong scriptaddr;
+	u64 bootscr_address;
+	u64 bootscr_offset;
+
+	/* Fetch bootscr_address/bootscr_offset from DT and update */
+	if (!ofnode_read_bootscript_address(&bootscr_address,
+					    &bootscr_offset)) {
+		if (bootscr_offset)
 			ret |= env_set_hex("scriptaddr",
-					   gd->ram_base + scriptaddr);
-		}
+					   gd->ram_base +
+					   bootscr_offset);
+		else
+			ret |= env_set_hex("scriptaddr",
+					   bootscr_address);
+	} else {
+		/* Update scriptaddr(bootscr offset) from env */
+		scriptaddr = env_get_hex("scriptaddr", 0);
+		ret |= env_set_hex("scriptaddr",
+				   gd->ram_base + scriptaddr);
 	}
 
 	if (!ofnode_read_bootscript_flash(&bootscr_flash_offset,
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index e6331c0e4d8..20a675c010d 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -72,6 +72,14 @@ int __maybe_unused psu_uboot_init(void)
 	writel(ZYNQMP_PS_SYSMON_ANALOG_BUS_VAL,
 	       ZYNQMP_AMS_PS_SYSMON_ANALOG_BUS);
 
+	/* Disable secure access for boot devices */
+	writel(0x04920492, ZYNQMP_IOU_SECURE_SLCR);
+	writel(0x00920492, ZYNQMP_IOU_SECURE_SLCR + 4);
+
+	/* Enable CCI PMU events */
+	writel(ZYNQMP_CCI_REG_CCI_MISC_CTRL_NIDEN,
+	       ZYNQMP_CCI_REG_CCI_MISC_CTRL);
+
 	/* Delay is required for clocks to be propagated */
 	udelay(1000000);
 	
diff --git a/board/xilinx/zynqmp/zynqmp_kria.env b/board/xilinx/zynqmp/zynqmp_kria.env
index 49ef3e7d753..d0e431ebb46 100644
--- a/board/xilinx/zynqmp/zynqmp_kria.env
+++ b/board/xilinx/zynqmp/zynqmp_kria.env
@@ -49,9 +49,19 @@ usb_boot_devices='usb0 usb1 usb2 usb3 usb4'
 som_cc_boot=if test ${card1_name} = SCK-KV-G; then setenv boot_targets mmc1 ${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; elif test ${card1_name} = SCK-KR-G; then setenv boot_targets ${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; else test ${card1_name} = SCK-KD-G; setenv boot_targets ${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; fi;"
 som_mmc_boot=setenv boot_targets mmc0 && run distro_bootcmd
 
+# To disable bootmenu set enable_bootmenu=0
+enable_bootmenu=1
+check_cc_for_default_boot=if test ${card1_name} = SCK-KV-G || test ${card1_name} = SCK-KR-G || test ${card1_name} = SCK-KD-G; then setenv bootmenu_default 1; else setenv bootmenu_default 0; fi
+som_bootmenu=if test ${enable_bootmenu} = 1; then run check_cc_for_default_boot; bootmenu; else run som_mmc_boot; fi
+
 k26_starter=SMK-K26-XCL2G
 k24_starter=SMK-K24-XCL2G
-bootcmd=setenv model $board_name && if setexpr model gsub .*$k24_starter* $k24_starter || setexpr model gsub .*$k26_starter* $k26_starter; then run som_cc_boot; else run som_mmc_boot; run som_cc_boot; fi
+bootcmd=setenv model $board_name; setexpr model gsub ".*${k24_starter}.*" starter; setexpr model gsub ".*${k26_starter}.*" starter; if test ${model} = "starter"; then run som_cc_boot; else run som_bootmenu; fi
+
+# Boot menu
+bootmenu_0=eMMC Boot=run som_mmc_boot
+bootmenu_1=SD Boot=run som_cc_boot
+bootmenu_delay=5
 
 usb_hub_init=mw 1000 0056 && sleep 1 && i2c write 1000 2d aa 2 -s
 
diff --git a/boot/bootm.c b/boot/bootm.c
index a61bbcfb45c..16a43d519a8 100644
--- a/boot/bootm.c
+++ b/boot/bootm.c
@@ -684,7 +684,7 @@ static int bootm_load_os(struct bootm_headers *images, int boot_progress)
 
 		/* Handle BOOTM_STATE_LOADOS */
 		if (relocated_addr != load) {
-			printf("Moving Image from 0x%lx to 0x%lx, end=%lx\n",
+			printf("Moving Image from 0x%lx to 0x%lx, end=0x%lx\n",
 			       load, relocated_addr,
 			       relocated_addr + image_size);
 			memmove((void *)relocated_addr, load_buf, image_size);
diff --git a/boot/bootmeth_android.c b/boot/bootmeth_android.c
index 6e8d3e615db..19b1f2c377b 100644
--- a/boot/bootmeth_android.c
+++ b/boot/bootmeth_android.c
@@ -22,6 +22,7 @@
 #include <malloc.h>
 #include <mapmem.h>
 #include <part.h>
+#include <version.h>
 #include "bootmeth_android.h"
 
 #define BCB_FIELD_COMMAND_SZ 32
@@ -171,6 +172,12 @@ static int configure_serialno(struct bootflow *bflow)
 	return bootflow_cmdline_set_arg(bflow, "androidboot.serialno", serialno, false);
 }
 
+static int configure_bootloader_version(struct bootflow *bflow)
+{
+	return bootflow_cmdline_set_arg(bflow, "androidboot.bootloader",
+					PLAIN_VERSION, false);
+}
+
 static int android_read_bootflow(struct udevice *dev, struct bootflow *bflow)
 {
 	struct blk_desc *desc = dev_get_uclass_plat(bflow->blk);
@@ -264,8 +271,12 @@ static int android_read_bootflow(struct udevice *dev, struct bootflow *bflow)
 		goto free_priv;
 	}
 
-	/* Ignoring return code: setting serial number is not mandatory for booting */
+	/*
+	 * Ignoring return code for the following configurations:
+	 * these are not mandatory for booting.
+	 */
 	configure_serialno(bflow);
+	configure_bootloader_version(bflow);
 
 	if (priv->boot_mode == ANDROID_BOOT_MODE_NORMAL) {
 		ret = bootflow_cmdline_set_arg(bflow, "androidboot.force_normal_boot",
diff --git a/boot/image-android.c b/boot/image-android.c
index 774565fd1fe..8934491c35f 100644
--- a/boot/image-android.c
+++ b/boot/image-android.c
@@ -409,6 +409,10 @@ int android_image_get_ramdisk(const void *hdr, const void *vendor_boot_img,
 			       (ramdisk_ptr), (void *)img_data.bootconfig_addr,
 			       img_data.bootconfig_size);
 		}
+	} else {
+		ramdisk_ptr = img_data.ramdisk_addr;
+		memcpy((void *)(ramdisk_ptr), (void *)img_data.ramdisk_ptr,
+		       img_data.ramdisk_size);
 	}
 
 	printf("RAM disk load addr 0x%08lx size %u KiB\n",
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 4ccb0cef390..dd33266cec7 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -498,11 +498,18 @@ config CMD_CEDIT
 	  loading and saving of configuration as well as showing an editor.
 
 config CMD_ELF
-	bool "bootelf, bootvx"
+	bool "bootelf"
 	default y
 	select LIB_ELF
 	help
-	  Boot an ELF/vxWorks image from the memory.
+	  Boot an ELF image from memory.
+
+config CMD_ELF_BOOTVX
+	bool "bootvx"
+	default y
+	depends on CMD_ELF
+	help
+	  Boot a vxWorks image from memory
 
 config CMD_ELF_FDT_SETUP
 	bool "Flattened Device Tree setup in bootelf cmd"
@@ -1685,9 +1692,8 @@ config CMD_ROCKUSB
 
 config CMD_USB_MASS_STORAGE
 	bool "UMS usb mass storage"
-	depends on USB_GADGET_DOWNLOAD
+	depends on BLK && USB_GADGET_DOWNLOAD
 	select USB_FUNCTION_MASS_STORAGE
-	depends on BLK && USB_GADGET
 	help
 	  Enables the command "ums" and the USB mass storage support to the
 	  export a block device: U-Boot, the USB device, acts as a simple
@@ -2109,6 +2115,7 @@ config CMD_ETHSW
 config CMD_PXE
 	bool "pxe"
 	select PXE_UTILS
+	imply CMD_TFTPBOOT
 	help
 	  Boot image via network using PXE protocol
 
diff --git a/cmd/booti.c b/cmd/booti.c
index 6018cbacf0a..43e79e87201 100644
--- a/cmd/booti.c
+++ b/cmd/booti.c
@@ -78,7 +78,7 @@ static int booti_start(struct bootm_info *bmi)
 
 	/* Handle BOOTM_STATE_LOADOS */
 	if (relocated_addr != ld) {
-		printf("Moving Image from 0x%lx to 0x%lx, end=%lx\n", ld,
+		printf("Moving Image from 0x%lx to 0x%lx, end=0x%lx\n", ld,
 		       relocated_addr, relocated_addr + image_size);
 		memmove((void *)relocated_addr, (void *)ld, image_size);
 	}
diff --git a/cmd/efidebug.c b/cmd/efidebug.c
index 1a191eb9994..e040fe75fa1 100644
--- a/cmd/efidebug.c
+++ b/cmd/efidebug.c
@@ -665,7 +665,7 @@ enum efi_lo_dp_part {
 };
 
 /**
- * create_lo_dp() - create a special device path for our Boot### option
+ * create_lo_dp_part() - create a special device path for our Boot### option
  *
  * @dev:	device
  * @part:	disk partition
@@ -1127,7 +1127,7 @@ static void show_efi_boot_opt(u16 *varname16)
 }
 
 /**
- * show_efi_boot_dump() - dump all UEFI load options
+ * do_efi_boot_dump() - dump all UEFI load options
  *
  * @cmdtp:	Command table
  * @flag:	Command flag
diff --git a/cmd/elf.c b/cmd/elf.c
index f07e344a596..114f2caf7fa 100644
--- a/cmd/elf.c
+++ b/cmd/elf.c
@@ -10,8 +10,10 @@
 #include <env.h>
 #include <image.h>
 #include <log.h>
+#ifdef CONFIG_CMD_ELF_BOOTVX
 #include <net.h>
 #include <vxworks.h>
+#endif
 #ifdef CONFIG_X86
 #include <vesa.h>
 #include <asm/cache.h>
@@ -100,6 +102,7 @@ int do_bootelf(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 	return rcode;
 }
 
+#ifdef CONFIG_CMD_ELF_BOOTVX
 /*
  * Interpreter command to boot VxWorks from a memory image.  The image can
  * be either an ELF image or a raw binary.  Will attempt to setup the
@@ -307,6 +310,7 @@ int do_bootvx(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 
 	return 1;
 }
+#endif
 
 U_BOOT_CMD(
 	bootelf, CONFIG_SYS_MAXARGS, 0, do_bootelf,
@@ -323,8 +327,10 @@ U_BOOT_CMD(
 #endif
 );
 
+#ifdef CONFIG_CMD_ELF_BOOTVX
 U_BOOT_CMD(
 	bootvx, 2, 0, do_bootvx,
 	"Boot vxWorks from an ELF image",
 	" [address] - load address of vxWorks ELF image."
 );
+#endif
diff --git a/cmd/sf.c b/cmd/sf.c
index f43a2e08b31..08e364e1914 100644
--- a/cmd/sf.c
+++ b/cmd/sf.c
@@ -10,6 +10,7 @@
 #include <div64.h>
 #include <dm.h>
 #include <log.h>
+#include <lmb.h>
 #include <malloc.h>
 #include <mapmem.h>
 #include <spi.h>
@@ -317,6 +318,13 @@ static int do_spi_flash_read_write(int argc, char *const argv[])
 			strncmp(argv[0], "write", 5) == 0) {
 		int read;
 
+		if (CONFIG_IS_ENABLED(LMB)) {
+			if (lmb_read_check(addr, len)) {
+				printf("ERROR: trying to overwrite reserved memory...\n");
+				return CMD_RET_FAILURE;
+			}
+		}
+
 		read = strncmp(argv[0], "read", 4) == 0;
 		if (read)
 			ret = spi_flash_read(flash, offset, len, buf);
diff --git a/common/Kconfig b/common/Kconfig
index e1b8557e0cb..957de0c5c02 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -934,6 +934,7 @@ menu "Update support"
 config UPDATE_COMMON
 	bool
 	select DFU_WRITE_ALT
+	imply CMD_TFTPBOOT
 
 config UPDATE_TFTP
 	bool "Auto-update using fitImage via TFTP"
diff --git a/common/flash.c b/common/flash.c
index 226646c6868..fd1b4ddf660 100644
--- a/common/flash.c
+++ b/common/flash.c
@@ -110,13 +110,13 @@ addr2info(ulong addr)
  * Make sure all target addresses are within Flash bounds,
  * and no protected sectors are hit.
  * Returns:
- * ERR_OK          0 - OK
- * ERR_TIMEOUT     1 - write timeout
- * ERR_NOT_ERASED  2 - Flash not erased
- * ERR_PROTECTED   4 - target range includes protected sectors
- * ERR_INVAL       8 - target address not in Flash memory
- * ERR_ALIGN       16 - target address not aligned on boundary
- *			(only some targets require alignment)
+ * FL_ERR_OK          0 - OK
+ * FL_ERR_TIMEOUT     1 - write timeout
+ * FL_ERR_NOT_ERASED  2 - Flash not erased
+ * FL_ERR_PROTECTED   4 - target range includes protected sectors
+ * FL_ERR_INVAL       8 - target address not in Flash memory
+ * FL_ERR_ALIGN       16 - target address not aligned on boundary
+ *			   (only some targets require alignment)
  */
 int
 flash_write(char *src, ulong addr, ulong cnt)
@@ -131,11 +131,11 @@ flash_write(char *src, ulong addr, ulong cnt)
 	__maybe_unused ulong cnt_orig = cnt;
 
 	if (cnt == 0) {
-		return (ERR_OK);
+		return (FL_ERR_OK);
 	}
 
 	if (!info_first || !info_last) {
-		return (ERR_INVAL);
+		return (FL_ERR_INVAL);
 	}
 
 	for (info = info_first; info <= info_last; ++info) {
@@ -146,7 +146,7 @@ flash_write(char *src, ulong addr, ulong cnt)
 
 			if ((end >= info->start[i]) && (addr < e_addr) &&
 			    (info->protect[i] != 0) ) {
-				return (ERR_PROTECTED);
+				return (FL_ERR_PROTECTED);
 			}
 		}
 	}
@@ -169,11 +169,11 @@ flash_write(char *src, ulong addr, ulong cnt)
 #if defined(CONFIG_FLASH_VERIFY)
 	if (memcmp(src_orig, addr_orig, cnt_orig)) {
 		printf("\nVerify failed!\n");
-		return ERR_PROG_ERROR;
+		return FL_ERR_PROG_ERROR;
 	}
 #endif /* CONFIG_SYS_FLASH_VERIFY_AFTER_WRITE */
 
-	return (ERR_OK);
+	return (FL_ERR_OK);
 }
 
 /*-----------------------------------------------------------------------
@@ -182,33 +182,33 @@ flash_write(char *src, ulong addr, ulong cnt)
 void flash_perror(int err)
 {
 	switch (err) {
-	case ERR_OK:
+	case FL_ERR_OK:
 		break;
-	case ERR_TIMEOUT:
+	case FL_ERR_TIMEOUT:
 		puts ("Timeout writing to Flash\n");
 		break;
-	case ERR_NOT_ERASED:
+	case FL_ERR_NOT_ERASED:
 		puts ("Flash not Erased\n");
 		break;
-	case ERR_PROTECTED:
+	case FL_ERR_PROTECTED:
 		puts ("Can't write to protected Flash sectors\n");
 		break;
-	case ERR_INVAL:
+	case FL_ERR_INVAL:
 		puts ("Outside available Flash\n");
 		break;
-	case ERR_ALIGN:
+	case FL_ERR_ALIGN:
 		puts ("Start and/or end address not on sector boundary\n");
 		break;
-	case ERR_UNKNOWN_FLASH_VENDOR:
+	case FL_ERR_UNKNOWN_FLASH_VENDOR:
 		puts ("Unknown Vendor of Flash\n");
 		break;
-	case ERR_UNKNOWN_FLASH_TYPE:
+	case FL_ERR_UNKNOWN_FLASH_TYPE:
 		puts ("Unknown Type of Flash\n");
 		break;
-	case ERR_PROG_ERROR:
+	case FL_ERR_PROG_ERROR:
 		puts ("General Flash Programming Error\n");
 		break;
-	case ERR_ABORTED:
+	case FL_ERR_ABORTED:
 		puts("Flash Programming Aborted\n");
 		break;
 	default:
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 3c44e329d62..2baf2ba7ccb 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -87,6 +87,8 @@ config SPL_MAX_SIZE
 	default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0
 	default 0x10000 if ASPEED_AST2600
 	default 0x27000 if IMX8MM && SPL_TEXT_BASE = 0x7E1000
+	default 0x30000 if ARCH_SC5XX && (SC59X_64 || SC59X)
+	default 0x20000 if ARCH_SC5XX && (SC58X || SC57X)
 	default 0x0
 	help
 	  Maximum size of the SPL image (text, data, rodata, and linker lists
@@ -111,7 +113,7 @@ config SPL_PAD_TO
 config SPL_HAS_BSS_LINKER_SECTION
 	depends on SPL_FRAMEWORK
 	bool "Use a specific address for the BSS via the linker script"
-	default y if ARCH_SUNXI || ARCH_MX6 || ARCH_OMAP2PLUS || MIPS || RISCV || ARCH_ZYNQMP
+	default y if ARCH_SUNXI || ARCH_MX6 || ARCH_OMAP2PLUS || MIPS || RISCV || ARCH_ZYNQMP || ARCH_SC5XX
 
 config SPL_BSS_START_ADDR
 	hex "Link address for the BSS within the SPL binary"
@@ -123,6 +125,9 @@ config SPL_BSS_START_ADDR
 	default 0x4ff80000 if ARCH_SUNXI && !(MACH_SUN9I || MACH_SUNIV)
 	default 0x2ff80000 if ARCH_SUNXI && MACH_SUN9I
 	default 0x1000 if ARCH_ZYNQMP
+	default 0x200B0000 if ARCH_SC5XX && (SC59X_64 || SC59X)
+	default 0x20080000 if ARCH_SC5XX && SC58X
+	default 0x200A0000 if ARCH_SC5XX && SC57X
 
 choice
 	prompt "Enforce SPL BSS limit"
@@ -151,6 +156,7 @@ config SPL_BSS_MAX_SIZE
 	depends on SPL_BSS_LIMIT
 	default 0x100000 if ARCH_MX6 || RISCV
 	default 0x80000 if ARCH_OMAP2PLUS || ARCH_SUNXI
+	default 0x10000 if ARCH_SC5XX
 	help
 	  When non-zero, the linker checks that the actual memory used by SPL
 	  from __bss_start to __bss_end does not exceed it.
@@ -270,6 +276,7 @@ config SPL_TEXT_BASE
 	default 0x20060 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2
 	default 0x00060 if ARCH_SUNXI
 	default 0xfffc0000 if ARCH_ZYNQMP
+	default 0x20080000 if ARCH_SC5XX
 	default 0x0
 	help
 	  The address in memory that SPL will be running from.
@@ -371,7 +378,7 @@ config SPL_SYS_MALLOC_SIMPLE
 config SPL_SHARES_INIT_SP_ADDR
 	bool "SPL and U-Boot use the same initial stack pointer location"
 	depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK
-	default n if ARCH_SUNXI || ARCH_MX6 || ARCH_MX7
+	default n if ARCH_SUNXI || ARCH_MX6 || ARCH_MX7 || ARCH_SC5XX
 	default y
 	help
 	  In many cases, we can use the same initial stack pointer address for
@@ -392,6 +399,9 @@ config SPL_STACK
 	default 0x54000 if MACH_SUN50I || MACH_SUN50I_H5
 	default 0x18000 if MACH_SUN9I
 	default 0x8000 if ARCH_SUNXI
+	default 0x200E4000 if ARCH_SC5XX && (SC59X_64 || SC59X)
+	default 0x200B0000 if ARCH_SC5XX && SC58X
+	default 0x200D0000 if ARCH_SC5XX && SC57X
 	help
 	  Address of the start of the stack SPL will use before SDRAM is
 	  initialized.
@@ -1134,6 +1144,9 @@ config SPL_PAYLOAD_ARGS_ADDR
 	hex "Address in memory to load 'args' file for Falcon Mode to"
 	depends on SPL_OS_BOOT || SPL_LOAD_FIT_OPENSBI_OS_BOOT
 	default 0x88000000 if ARCH_OMAP2PLUS
+	default 0x99000000 if ARCH_SC5XX && SC59X_64
+	default 0xA0000000 if ARCH_SC5XX && TARGET_SC594_SOM_EZKIT
+	default 0x80000000 if ARCH_SC5XX && TARGET_SC594_SOM_EZLITE
 	help
 	  Address in memory where the 'args' file, typically a device tree
 	  will be loaded in to memory.
@@ -1248,15 +1261,11 @@ config SPL_POWER_DOMAIN
 	  the drivers in drivers/power/domain as part of a SPL build.
 
 config SPL_RAM_SUPPORT
-	bool "Support booting from RAM"
-	default y if MICROBLAZE || ARCH_SOCFPGA || ARCH_TEGRA || ARCH_ZYNQ
-	help
-	  Enable booting of an image in RAM. The image can be preloaded or
-	  it can be loaded by SPL directly into RAM (e.g. using USB).
+	bool
 
 config SPL_RAM_DEVICE
 	bool "Support booting from preloaded image in RAM"
-	depends on SPL_RAM_SUPPORT
+	select SPL_RAM_SUPPORT
 	default y if MICROBLAZE || ARCH_SOCFPGA || ARCH_TEGRA || ARCH_ZYNQ
 	help
 	  Enable booting of an image already loaded in RAM. The image has to
@@ -1442,7 +1451,7 @@ config SPL_ATF
 	help
 	  ATF(ARM Trusted Firmware) is a component for ARM AArch64 which
 	  is loaded by SPL (which is considered as BL2 in ATF terminology).
-	  More detail at: https://github.com/ARM-software/arm-trusted-firmware
+	  More detail at: https://github.com/TrustedFirmware-A/trusted-firmware-a
 
 config SPL_ATF_LOAD_IMAGE_V2
 	bool "Use the new LOAD_IMAGE_V2 parameter passing"
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index 1337596eca0..1f696593216 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -50,6 +50,7 @@ int mmc_load_image_raw_sector(struct spl_image_info *spl_image,
 	ret = spl_load(spl_image, bootdev, &load, 0, sector << bd->log2blksz);
 	if (ret) {
 		puts("mmc_load_image_raw_sector: mmc block read error\n");
+		log_debug("(error=%d)\n", ret);
 		return ret;
 	}
 
@@ -76,6 +77,12 @@ static int spl_mmc_find_device(struct mmc **mmcp, int mmc_dev)
 	int ret;
 
 #if CONFIG_IS_ENABLED(DM_MMC)
+	struct udevice *dev;
+	struct uclass *uc;
+
+	log_debug("Selecting MMC dev %d; seqs:\n", mmc_dev);
+	uclass_id_foreach_dev(UCLASS_MMC, dev, uc)
+		log_debug("%d: %s\n", dev_seq(dev), dev->name);
 	ret = mmc_init_device(mmc_dev);
 #else
 	ret = mmc_initialize(NULL);
@@ -91,6 +98,9 @@ static int spl_mmc_find_device(struct mmc **mmcp, int mmc_dev)
 		       mmc_dev, ret);
 		return ret;
 	}
+#if CONFIG_IS_ENABLED(DM_MMC)
+	log_debug("mmc %d: %s\n", mmc_dev, (*mmcp)->dev->name);
+#endif
 
 	return 0;
 }
@@ -342,6 +352,8 @@ int spl_mmc_load(struct spl_image_info *spl_image,
 
 	/* Perform peripheral init only once for an mmc device */
 	mmc_dev = spl_mmc_get_device_index(bootdev->boot_device);
+	log_debug("boot_device=%d, mmc_dev=%d\n", bootdev->boot_device,
+		  mmc_dev);
 	if (!mmc || spl_mmc_get_mmc_devnum(mmc) != mmc_dev) {
 		ret = spl_mmc_find_device(&mmc, mmc_dev);
 		if (ret)
diff --git a/configs/CMPC885_defconfig b/configs/CMPC885_defconfig
index 11c24f72a82..559cf14f041 100644
--- a/configs/CMPC885_defconfig
+++ b/configs/CMPC885_defconfig
@@ -4,6 +4,7 @@ CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="cmpc885"
 CONFIG_SYS_MONITOR_LEN=327680
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_CLK_FREQ=132000000
 CONFIG_ENV_ADDR=0x40004000
 CONFIG_MPC8xx=y
@@ -22,7 +23,6 @@ CONFIG_SYS_SCCR=0x00420000
 CONFIG_SYS_SCCR_MASK=0x00000000
 CONFIG_SYS_DER=0x2002000F
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=5
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_FLUSH_STDIN=y
diff --git a/configs/CMPCPRO_defconfig b/configs/CMPCPRO_defconfig
index f8f5c9fd869..e92dc0cbc62 100644
--- a/configs/CMPCPRO_defconfig
+++ b/configs/CMPCPRO_defconfig
@@ -6,6 +6,7 @@ CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="cmpcpro"
 CONFIG_SYS_MONITOR_LEN=393216
+CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_SYS_CLK_FREQ=66666667
 CONFIG_ENV_ADDR=0x400e0000
 CONFIG_MPC83xx=y
@@ -101,7 +102,6 @@ CONFIG_SPCR_OPT_SPEC_READ=y
 CONFIG_LCRR_EADC_1=y
 CONFIG_LCRR_CLKDIV_2=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_BOOTDELAY=5
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_FLUSH_STDIN=y
diff --git a/configs/M5208EVBE_defconfig b/configs/M5208EVBE_defconfig
index c6c2ad71e40..d87c4754a30 100644
--- a/configs/M5208EVBE_defconfig
+++ b/configs/M5208EVBE_defconfig
@@ -5,12 +5,12 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="M5208EVBE"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x40010000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
 CONFIG_ENV_ADDR=0x2000
 CONFIG_TARGET_M5208EVBE=y
 CONFIG_SYS_MONITOR_BASE=0x00000400
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=1
 CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M5235EVB_Flash32_defconfig b/configs/M5235EVB_Flash32_defconfig
index 9b191858738..bf57c067d9f 100644
--- a/configs/M5235EVB_Flash32_defconfig
+++ b/configs/M5235EVB_Flash32_defconfig
@@ -5,13 +5,13 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="M5235EVB_Flash32"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
 CONFIG_ENV_ADDR=0xFFE04000
 CONFIG_TARGET_M5235EVB=y
 CONFIG_NORFLASH_PS32BIT=y
 CONFIG_SYS_MONITOR_BASE=0xFFC00400
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_BOOTDELAY=1
 CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M5235EVB_defconfig b/configs/M5235EVB_defconfig
index fac30716dac..7cfec24cf7c 100644
--- a/configs/M5235EVB_defconfig
+++ b/configs/M5235EVB_defconfig
@@ -5,12 +5,12 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="M5235EVB"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
 CONFIG_ENV_ADDR=0xFFE04000
 CONFIG_TARGET_M5235EVB=y
 CONFIG_SYS_MONITOR_BASE=0xFFE00400
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_BOOTDELAY=1
 CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig
index 14a3d9d8879..a1ce8ddf729 100644
--- a/configs/M5253DEMO_defconfig
+++ b/configs/M5253DEMO_defconfig
@@ -5,11 +5,11 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="M5253DEMO"
 CONFIG_SYS_MONITOR_LEN=262144
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_ENV_ADDR=0xFF804000
 CONFIG_TARGET_M5253DEMO=y
 CONFIG_SYS_MONITOR_BASE=0xFF800400
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_BOOTDELAY=5
 CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M5272C3_defconfig b/configs/M5272C3_defconfig
index b6f8d183b3b..754b43eabbc 100644
--- a/configs/M5272C3_defconfig
+++ b/configs/M5272C3_defconfig
@@ -5,8 +5,8 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="M5272C3"
 CONFIG_SYS_MONITOR_LEN=131072
-CONFIG_WATCHDOG_TIMEOUT_MSECS=10000
 CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=10000
 CONFIG_ENV_ADDR=0xFFE04000
 CONFIG_TARGET_M5272C3=y
 CONFIG_SYS_MONITOR_BASE=0xFFE00400
diff --git a/configs/M5275EVB_defconfig b/configs/M5275EVB_defconfig
index 4400075d0e2..effff668341 100644
--- a/configs/M5275EVB_defconfig
+++ b/configs/M5275EVB_defconfig
@@ -5,11 +5,11 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="M5275EVB"
 CONFIG_SYS_MONITOR_LEN=131072
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_ENV_ADDR=0xFFE04000
 CONFIG_TARGET_M5275EVB=y
 CONFIG_SYS_MONITOR_BASE=0xFFE00400
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="bootm ffe40000"
diff --git a/configs/M53017EVB_defconfig b/configs/M53017EVB_defconfig
index 46df7c2a70c..5f7491f80b5 100644
--- a/configs/M53017EVB_defconfig
+++ b/configs/M53017EVB_defconfig
@@ -5,12 +5,12 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_SECT_SIZE=0x8000
 CONFIG_DEFAULT_DEVICE_TREE="M53017EVB"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x40010000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
 CONFIG_ENV_ADDR=0x40000
 CONFIG_TARGET_M53017EVB=y
 CONFIG_SYS_MONITOR_BASE=0x00000400
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_BOOTDELAY=1
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="root=/dev/mtdblock3 rw rootfstype=jffs2"
diff --git a/configs/M5329AFEE_defconfig b/configs/M5329AFEE_defconfig
index 3e5da1f5bc6..db3ae65b8ab 100644
--- a/configs/M5329AFEE_defconfig
+++ b/configs/M5329AFEE_defconfig
@@ -5,12 +5,12 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="M5329AFEE"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x40010000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
 CONFIG_ENV_ADDR=0x4000
 CONFIG_TARGET_M5329EVB=y
 CONFIG_SYS_MONITOR_BASE=0x00000400
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=1
 CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M5329BFEE_defconfig b/configs/M5329BFEE_defconfig
index ab7b8e6883c..0cbde6ea8c2 100644
--- a/configs/M5329BFEE_defconfig
+++ b/configs/M5329BFEE_defconfig
@@ -5,12 +5,12 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="M5329BFEE"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x40010000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
 CONFIG_ENV_ADDR=0x4000
 CONFIG_TARGET_M5329EVB=y
 CONFIG_SYS_MONITOR_BASE=0x00000400
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=1
 CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/M5373EVB_defconfig b/configs/M5373EVB_defconfig
index 1df1682b73a..ba55e1115b6 100644
--- a/configs/M5373EVB_defconfig
+++ b/configs/M5373EVB_defconfig
@@ -5,12 +5,12 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="M5373EVB"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_WATCHDOG_TIMEOUT_MSECS=3360
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x40010000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=3360
 CONFIG_ENV_ADDR=0x4000
 CONFIG_TARGET_M5373EVB=y
 CONFIG_SYS_MONITOR_BASE=0x00000400
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=1
 CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/MCR3000_defconfig b/configs/MCR3000_defconfig
index f2eac2c5449..004f7505e7d 100644
--- a/configs/MCR3000_defconfig
+++ b/configs/MCR3000_defconfig
@@ -5,8 +5,9 @@ CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="mcr3000"
 CONFIG_SYS_MONITOR_LEN=327680
-CONFIG_SYS_CLK_FREQ=132000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x200000
+CONFIG_SYS_CLK_FREQ=132000000
 CONFIG_ENV_ADDR=0x4004000
 CONFIG_MPC8xx=y
 # CONFIG_PCI is not set
@@ -22,7 +23,6 @@ CONFIG_SYS_SCCR_MASK=0x60000000
 CONFIG_SYS_DER=0x2002000F
 CONFIG_SYS_MONITOR_BASE=0x04000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=5
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_FLUSH_STDIN=y
diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig
index 4dde0553b0c..76b42cb6a15 100644
--- a/configs/P2041RDB_NAND_defconfig
+++ b/configs/P2041RDB_NAND_defconfig
@@ -35,7 +35,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_ID_EEPROM=y
diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig
index 9a4c72bf921..008c87b7219 100644
--- a/configs/P2041RDB_SDCARD_defconfig
+++ b/configs/P2041RDB_SDCARD_defconfig
@@ -35,7 +35,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_ID_EEPROM=y
diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig
index f0d792bbfbf..c01fc869322 100644
--- a/configs/P2041RDB_SPIFLASH_defconfig
+++ b/configs/P2041RDB_SPIFLASH_defconfig
@@ -37,7 +37,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_ID_EEPROM=y
diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig
index 26334258075..fef52a61a51 100644
--- a/configs/P2041RDB_defconfig
+++ b/configs/P2041RDB_defconfig
@@ -33,7 +33,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_ID_EEPROM=y
diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig
index c4625bf132d..bc10b6e4d2a 100644
--- a/configs/SBx81LIFKW_defconfig
+++ b/configs/SBx81LIFKW_defconfig
@@ -13,8 +13,8 @@ CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-atl-sbx81lifkw"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_IDENT_STRING="\nSBx81LIFKW"
 CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_IDENT_STRING="\nSBx81LIFKW"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig
index 01e50af94d6..427b48b5f09 100644
--- a/configs/SBx81LIFXCAT_defconfig
+++ b/configs/SBx81LIFXCAT_defconfig
@@ -13,8 +13,8 @@ CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-atl-sbx81lifxcat"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_IDENT_STRING="\nSBx81LIFXCAT"
 CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_IDENT_STRING="\nSBx81LIFXCAT"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig
index b2413a0bbcb..34ef789dcd8 100644
--- a/configs/T1024RDB_NAND_defconfig
+++ b/configs/T1024RDB_NAND_defconfig
@@ -40,7 +40,6 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
 CONFIG_SYS_PBSIZE=276
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_ID_EEPROM=y
diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig
index 2eb320a2064..3dc29f7cec2 100644
--- a/configs/T1024RDB_SDCARD_defconfig
+++ b/configs/T1024RDB_SDCARD_defconfig
@@ -40,7 +40,6 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
 CONFIG_SYS_PBSIZE=276
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_ID_EEPROM=y
diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig
index 7ca78ce29a3..6b43fd72542 100644
--- a/configs/T1024RDB_SPIFLASH_defconfig
+++ b/configs/T1024RDB_SPIFLASH_defconfig
@@ -43,7 +43,6 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
 CONFIG_SYS_PBSIZE=276
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_ID_EEPROM=y
diff --git a/configs/T1024RDB_defconfig b/configs/T1024RDB_defconfig
index 4be83226f9a..b02e153e1c2 100644
--- a/configs/T1024RDB_defconfig
+++ b/configs/T1024RDB_defconfig
@@ -31,7 +31,6 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
 CONFIG_SYS_PBSIZE=276
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_ID_EEPROM=y
diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig
index f8fabab2c13..7d2b5ea25f1 100644
--- a/configs/T1042D4RDB_NAND_defconfig
+++ b/configs/T1042D4RDB_NAND_defconfig
@@ -39,7 +39,6 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
 CONFIG_SYS_PBSIZE=276
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig
index df752cefc4f..e26fe8fdb90 100644
--- a/configs/T1042D4RDB_SDCARD_defconfig
+++ b/configs/T1042D4RDB_SDCARD_defconfig
@@ -39,7 +39,6 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
 CONFIG_SYS_PBSIZE=276
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig
index 4aff7a0c8d1..f63e9de0d9c 100644
--- a/configs/T1042D4RDB_SPIFLASH_defconfig
+++ b/configs/T1042D4RDB_SPIFLASH_defconfig
@@ -42,7 +42,6 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
 CONFIG_SYS_PBSIZE=276
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig
index 2e7285cc1a9..fb2c23f863c 100644
--- a/configs/T1042D4RDB_defconfig
+++ b/configs/T1042D4RDB_defconfig
@@ -30,7 +30,6 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra
 CONFIG_SYS_PBSIZE=276
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig
index 232709f83c9..1ca48d3bc48 100644
--- a/configs/T2080QDS_NAND_defconfig
+++ b/configs/T2080QDS_NAND_defconfig
@@ -49,7 +49,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig
index b131a5ddd14..b70c3f6dab6 100644
--- a/configs/T2080QDS_SDCARD_defconfig
+++ b/configs/T2080QDS_SDCARD_defconfig
@@ -49,7 +49,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig
index d2ec52f1f1a..94991cd70a1 100644
--- a/configs/T2080QDS_SPIFLASH_defconfig
+++ b/configs/T2080QDS_SPIFLASH_defconfig
@@ -52,7 +52,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
index 230581170e3..a0dbbd0c54d 100644
--- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
+++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
@@ -40,7 +40,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig
index 525afa0a165..b52112fcba5 100644
--- a/configs/T2080QDS_defconfig
+++ b/configs/T2080QDS_defconfig
@@ -40,7 +40,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig
index 1b7458aba53..7b015ed1398 100644
--- a/configs/T2080RDB_NAND_defconfig
+++ b/configs/T2080RDB_NAND_defconfig
@@ -43,7 +43,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig
index 3ed51a8a002..0e9ebaaa009 100644
--- a/configs/T2080RDB_SDCARD_defconfig
+++ b/configs/T2080RDB_SDCARD_defconfig
@@ -43,7 +43,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig
index 0ea5567250d..15523198df4 100644
--- a/configs/T2080RDB_SPIFLASH_defconfig
+++ b/configs/T2080RDB_SPIFLASH_defconfig
@@ -46,7 +46,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig
index 362e6619a9a..bb0f2c24908 100644
--- a/configs/T2080RDB_defconfig
+++ b/configs/T2080RDB_defconfig
@@ -34,7 +34,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig
index e205a5ec67c..b98c861878a 100644
--- a/configs/T2080RDB_revD_NAND_defconfig
+++ b/configs/T2080RDB_revD_NAND_defconfig
@@ -44,7 +44,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig
index 2c79ec3c105..f97bf90adf9 100644
--- a/configs/T2080RDB_revD_SDCARD_defconfig
+++ b/configs/T2080RDB_revD_SDCARD_defconfig
@@ -44,7 +44,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig
index 1eea763fc1c..15cb9b2ce55 100644
--- a/configs/T2080RDB_revD_SPIFLASH_defconfig
+++ b/configs/T2080RDB_revD_SPIFLASH_defconfig
@@ -47,7 +47,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
diff --git a/configs/T2080RDB_revD_defconfig b/configs/T2080RDB_revD_defconfig
index 1a5251dd127..5aff1805574 100644
--- a/configs/T2080RDB_revD_defconfig
+++ b/configs/T2080RDB_revD_defconfig
@@ -35,7 +35,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig
index f31a408ef07..4881efc4181 100644
--- a/configs/T4240RDB_SDCARD_defconfig
+++ b/configs/T4240RDB_SDCARD_defconfig
@@ -41,7 +41,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x28000
diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig
index 128e6d5c586..e558bf70551 100644
--- a/configs/T4240RDB_defconfig
+++ b/configs/T4240RDB_defconfig
@@ -32,7 +32,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_PBSIZE=276
-CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
diff --git a/configs/a3y17lte_defconfig b/configs/a3y17lte_defconfig
index b012b985a30..1143af9064b 100644
--- a/configs/a3y17lte_defconfig
+++ b/configs/a3y17lte_defconfig
@@ -10,9 +10,9 @@ CONFIG_NR_DRAM_BANKS=8
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200e50
 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte"
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x40001000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
 CONFIG_SAVE_PREV_BL_FDT_ADDR=y
diff --git a/configs/a5y17lte_defconfig b/configs/a5y17lte_defconfig
index 25a7d5bc984..26ec9cb72ab 100644
--- a/configs/a5y17lte_defconfig
+++ b/configs/a5y17lte_defconfig
@@ -10,9 +10,9 @@ CONFIG_NR_DRAM_BANKS=12
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200e50
 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte"
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x40001000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
 CONFIG_SAVE_PREV_BL_FDT_ADDR=y
diff --git a/configs/a7y17lte_defconfig b/configs/a7y17lte_defconfig
index c87379ab391..f3982d096e7 100644
--- a/configs/a7y17lte_defconfig
+++ b/configs/a7y17lte_defconfig
@@ -10,9 +10,9 @@ CONFIG_NR_DRAM_BANKS=12
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200e50
 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte"
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x40001000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
 CONFIG_SAVE_PREV_BL_FDT_ADDR=y
diff --git a/configs/ad401_defconfig b/configs/ad401_defconfig
index b44b9c63e83..71026de73b2 100644
--- a/configs/ad401_defconfig
+++ b/configs/ad401_defconfig
@@ -7,9 +7,9 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="meson-a1-ad401"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_MESON_A1=y
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART_BASE=0xfe001c00
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART=y
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_FIT=y
diff --git a/configs/ae350_rv32_defconfig b/configs/ae350_rv32_defconfig
index 35ad62c845d..395a27eb30e 100644
--- a/configs/ae350_rv32_defconfig
+++ b/configs/ae350_rv32_defconfig
@@ -7,11 +7,11 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe80
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="ae350_32"
 CONFIG_SYS_MONITOR_LEN=786432
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv32_falcon_defconfig b/configs/ae350_rv32_falcon_defconfig
index a8f3c00066e..66b809d2376 100644
--- a/configs/ae350_rv32_falcon_defconfig
+++ b/configs/ae350_rv32_falcon_defconfig
@@ -9,8 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="ae350_32"
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
 CONFIG_SPL_BSS_START_ADDR=0x400000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SPL=y
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_RISCV_SMODE=y
 # CONFIG_AVAILABLE_HARTS is not set
@@ -18,7 +19,6 @@ CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv32_falcon_xip_defconfig b/configs/ae350_rv32_falcon_xip_defconfig
index 0f9a7b0f4c9..116fd21d238 100644
--- a/configs/ae350_rv32_falcon_xip_defconfig
+++ b/configs/ae350_rv32_falcon_xip_defconfig
@@ -10,8 +10,9 @@ CONFIG_SPL_TEXT_BASE=0x80000000
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
 CONFIG_SPL_BSS_START_ADDR=0x400000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SPL=y
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_RISCV_SMODE=y
 CONFIG_SPL_XIP=y
@@ -19,7 +20,6 @@ CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv32_spl_defconfig b/configs/ae350_rv32_spl_defconfig
index 76711b96400..098cf7686d6 100644
--- a/configs/ae350_rv32_spl_defconfig
+++ b/configs/ae350_rv32_spl_defconfig
@@ -9,15 +9,15 @@ CONFIG_DEFAULT_DEVICE_TREE="ae350_32"
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
 CONFIG_SPL_BSS_START_ADDR=0x400000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SPL=y
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_RISCV_SMODE=y
 # CONFIG_AVAILABLE_HARTS is not set
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv32_spl_xip_defconfig b/configs/ae350_rv32_spl_xip_defconfig
index 39db36c3f6c..642fb7b3c31 100644
--- a/configs/ae350_rv32_spl_xip_defconfig
+++ b/configs/ae350_rv32_spl_xip_defconfig
@@ -10,15 +10,15 @@ CONFIG_SPL_TEXT_BASE=0x80000000
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
 CONFIG_SPL_BSS_START_ADDR=0x400000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SPL=y
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_RISCV_SMODE=y
 CONFIG_SPL_XIP=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv32_xip_defconfig b/configs/ae350_rv32_xip_defconfig
index 95863595d2d..a53795f5900 100644
--- a/configs/ae350_rv32_xip_defconfig
+++ b/configs/ae350_rv32_xip_defconfig
@@ -7,12 +7,12 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe80
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="ae350_32"
 CONFIG_SYS_MONITOR_LEN=786432
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_XIP=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv64_defconfig b/configs/ae350_rv64_defconfig
index 988214285a4..6d0130949b7 100644
--- a/configs/ae350_rv64_defconfig
+++ b/configs/ae350_rv64_defconfig
@@ -6,12 +6,12 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffd70
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="ae350_64"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_ARCH_RV64I=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv64_falcon_defconfig b/configs/ae350_rv64_falcon_defconfig
index 1cd978e4229..c9417175ce7 100644
--- a/configs/ae350_rv64_falcon_defconfig
+++ b/configs/ae350_rv64_falcon_defconfig
@@ -8,8 +8,9 @@ CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="ae350_64"
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
 CONFIG_SPL_BSS_START_ADDR=0x400000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SPL=y
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
@@ -18,7 +19,6 @@ CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv64_falcon_xip_defconfig b/configs/ae350_rv64_falcon_xip_defconfig
index 7a1f880e059..eb69e59552d 100644
--- a/configs/ae350_rv64_falcon_xip_defconfig
+++ b/configs/ae350_rv64_falcon_xip_defconfig
@@ -9,8 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="ae350_64"
 CONFIG_SPL_TEXT_BASE=0x80000000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
 CONFIG_SPL_BSS_START_ADDR=0x400000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SPL=y
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
@@ -19,7 +20,6 @@ CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv64_spl_defconfig b/configs/ae350_rv64_spl_defconfig
index c70413c8ba7..83ce28077f0 100644
--- a/configs/ae350_rv64_spl_defconfig
+++ b/configs/ae350_rv64_spl_defconfig
@@ -8,8 +8,9 @@ CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="ae350_64"
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
 CONFIG_SPL_BSS_START_ADDR=0x400000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SPL=y
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
@@ -17,7 +18,6 @@ CONFIG_RISCV_SMODE=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv64_spl_xip_defconfig b/configs/ae350_rv64_spl_xip_defconfig
index 279923cb832..9b80234bbb5 100644
--- a/configs/ae350_rv64_spl_xip_defconfig
+++ b/configs/ae350_rv64_spl_xip_defconfig
@@ -9,8 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="ae350_64"
 CONFIG_SPL_TEXT_BASE=0x80000000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
 CONFIG_SPL_BSS_START_ADDR=0x400000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SPL=y
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
@@ -18,7 +19,6 @@ CONFIG_SPL_XIP=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/ae350_rv64_xip_defconfig b/configs/ae350_rv64_xip_defconfig
index 835f0209903..b1997264797 100644
--- a/configs/ae350_rv64_xip_defconfig
+++ b/configs/ae350_rv64_xip_defconfig
@@ -6,13 +6,13 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffd70
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="ae350_64"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_TARGET_ANDES_AE350=y
 CONFIG_ARCH_RV64I=y
 CONFIG_XIP=y
 CONFIG_SYS_MONITOR_BASE=0x88000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/alt_defconfig b/configs/alt_defconfig
index c9ca22cbe8f..c480762fa28 100644
--- a/configs/alt_defconfig
+++ b/configs/alt_defconfig
@@ -25,12 +25,13 @@ CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0xe6340000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_ENV_ADDR=0xC0000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CBSIZE=256
@@ -40,7 +41,6 @@ CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000
@@ -107,4 +107,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig
index 3fcebc6aa7d..bb09354f716 100644
--- a/configs/am335x_baltos_defconfig
+++ b/configs/am335x_baltos_defconfig
@@ -8,11 +8,11 @@ CONFIG_AM33XX=y
 CONFIG_TARGET_AM335X_BALTOS=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTCOMMAND="run findfdt; run usbboot;run mmcboot;setenv mmcdev 1; setenv bootpart 1:2; run mmcboot;run nandboot;"
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index 5dd0b328835..6d1da0cfc7c 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -9,12 +9,12 @@ CONFIG_CLOCK_SYNTHESIZER=y
 CONFIG_AM335X_USB0=y
 CONFIG_AM335X_USB0_PERIPHERAL=y
 CONFIG_AM335X_USB1=y
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 CONFIG_TIMESTAMP=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_bootcmd"
diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig
index a55aace0246..221b2f26a43 100644
--- a/configs/am335x_evm_spiboot_defconfig
+++ b/configs/am335x_evm_spiboot_defconfig
@@ -10,13 +10,13 @@ CONFIG_AM33XX=y
 CONFIG_CLOCK_SYNTHESIZER=y
 # CONFIG_OF_LIBFDT_OVERLAY is not set
 # CONFIG_SPL_MMC is not set
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 # CONFIG_SPL_FS_FAT is not set
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_TIMESTAMP=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_bootcmd"
diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig
index 6b36f6edee0..4059d07b5c8 100644
--- a/configs/am335x_guardian_defconfig
+++ b/configs/am335x_guardian_defconfig
@@ -14,13 +14,13 @@ CONFIG_AM335X_USB1=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x540000
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x81000000
 CONFIG_TIMESTAMP=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
@@ -33,7 +33,6 @@ CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_ETH=y
 CONFIG_SPL_I2C=y
diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig
index d780239715f..2c23c9b88dd 100644
--- a/configs/am335x_hs_evm_defconfig
+++ b/configs/am335x_hs_evm_defconfig
@@ -9,10 +9,10 @@ CONFIG_SPL_TEXT_BASE=0x40300350
 CONFIG_AM33XX=y
 CONFIG_CLOCK_SYNTHESIZER=y
 # CONFIG_OF_LIBFDT_OVERLAY is not set
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 CONFIG_TIMESTAMP=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_bootcmd"
diff --git a/configs/am335x_hs_evm_uart_defconfig b/configs/am335x_hs_evm_uart_defconfig
index bd979941b7a..afa6e498adf 100644
--- a/configs/am335x_hs_evm_uart_defconfig
+++ b/configs/am335x_hs_evm_uart_defconfig
@@ -10,12 +10,12 @@ CONFIG_AM33XX=y
 CONFIG_CLOCK_SYNTHESIZER=y
 # CONFIG_OF_LIBFDT_OVERLAY is not set
 # CONFIG_SPL_MMC is not set
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 # CONFIG_SPL_FS_FAT is not set
 # CONFIG_SPL_LIBDISK_SUPPORT is not set
 CONFIG_TIMESTAMP=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_bootcmd"
diff --git a/configs/am335x_pdu001_defconfig b/configs/am335x_pdu001_defconfig
index d9acc81e9d3..54da31f45f7 100644
--- a/configs/am335x_pdu001_defconfig
+++ b/configs/am335x_pdu001_defconfig
@@ -15,6 +15,7 @@ CONFIG_SPL=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_LOCALVERSION="-EETS-1.0.0"
+# CONFIG_EFI_LOADER is not set
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_AUTOBOOT_KEYED=y
@@ -60,4 +61,3 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_TPS65910=y
 CONFIG_CONS_INDEX=4
 # CONFIG_SPL_USE_TINY_PRINTF is not set
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig
index 72933ba1a64..2dfcd182cca 100644
--- a/configs/am335x_shc_defconfig
+++ b/configs/am335x_shc_defconfig
@@ -11,13 +11,13 @@ CONFIG_AM33XX=y
 CONFIG_TARGET_AM335X_SHC=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x9000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SERIES=y
 CONFIG_TIMESTAMP=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SHOW_BOOT_PROGRESS=y
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig
index b8a3227557d..61527e2724a 100644
--- a/configs/am335x_shc_ict_defconfig
+++ b/configs/am335x_shc_ict_defconfig
@@ -11,6 +11,7 @@ CONFIG_AM33XX=y
 CONFIG_TARGET_AM335X_SHC=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x9000
 CONFIG_SPL_FS_FAT=y
@@ -18,7 +19,6 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SHC_ICT=y
 CONFIG_SERIES=y
 CONFIG_TIMESTAMP=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SHOW_BOOT_PROGRESS=y
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/am335x_shc_netboot_defconfig b/configs/am335x_shc_netboot_defconfig
index b25a4de30c7..da9c1b3d753 100644
--- a/configs/am335x_shc_netboot_defconfig
+++ b/configs/am335x_shc_netboot_defconfig
@@ -11,6 +11,7 @@ CONFIG_AM33XX=y
 CONFIG_TARGET_AM335X_SHC=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x9000
 CONFIG_SPL_FS_FAT=y
@@ -18,7 +19,6 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SHC_NETBOOT=y
 CONFIG_SERIES=y
 CONFIG_TIMESTAMP=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SHOW_BOOT_PROGRESS=y
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/am335x_shc_sdboot_defconfig b/configs/am335x_shc_sdboot_defconfig
index 8486ccb6d52..46e9e49a377 100644
--- a/configs/am335x_shc_sdboot_defconfig
+++ b/configs/am335x_shc_sdboot_defconfig
@@ -11,6 +11,7 @@ CONFIG_AM33XX=y
 CONFIG_TARGET_AM335X_SHC=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x9000
 CONFIG_SPL_FS_FAT=y
@@ -18,7 +19,6 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SHC_SDBOOT=y
 CONFIG_SERIES=y
 CONFIG_TIMESTAMP=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SHOW_BOOT_PROGRESS=y
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig
index 7444e55b6f7..1a48c05f06e 100644
--- a/configs/am335x_sl50_defconfig
+++ b/configs/am335x_sl50_defconfig
@@ -10,12 +10,12 @@ CONFIG_AM33XX=y
 CONFIG_TARGET_AM335X_SL50=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x20000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_TIMESTAMP=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index 4c1f664edec..ae7b35c67d0 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -12,6 +12,7 @@ CONFIG_EMIF4=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2500
 CONFIG_SPL=y
 CONFIG_LTO=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device $mmcdev; if run loadbootenv; then run importbootenv; fi; echo Checking if uenvcmd is set ...; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; echo Running default loadimage ...; setenv bootfile zImage; if run loadimage; then run loadfdt; run mmcboot; fi; else run nandboot; fi"
@@ -19,7 +20,6 @@ CONFIG_SYS_PBSIZE=1054
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 # CONFIG_SPL_FS_EXT4 is not set
 # CONFIG_SPL_I2C is not set
 CONFIG_SPL_MTD=y
@@ -96,4 +96,3 @@ CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_AM35X=y
 CONFIG_BCH=y
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 587af53acb6..efc154eda04 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am572x-idk"
 CONFIG_SPL_TEXT_BASE=0x40300000
 CONFIG_OMAP54XX=y
 CONFIG_TARGET_AM57XX_EVM=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x280000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -15,7 +16,6 @@ CONFIG_SPL_SPI=y
 CONFIG_ARMV7_LPAE=y
 CONFIG_AHCI=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
index b790897645f..0f8533e15db 100644
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@@ -11,6 +11,7 @@ CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
 CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
 CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
 CONFIG_TARGET_AM57XX_EVM=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x280000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -18,7 +19,6 @@ CONFIG_SPL_SPI=y
 CONFIG_ARMV7_LPAE=y
 CONFIG_AHCI=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig
index 450751b354f..81a938339d5 100644
--- a/configs/am57xx_hs_evm_usb_defconfig
+++ b/configs/am57xx_hs_evm_usb_defconfig
@@ -12,6 +12,7 @@ CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
 CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
 CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
 CONFIG_TARGET_AM57XX_EVM=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x280000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -20,7 +21,6 @@ CONFIG_ARMV7_LPAE=y
 CONFIG_AHCI=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTARGS=y
@@ -39,7 +39,6 @@ CONFIG_SPL_DMA=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
 CONFIG_SPL_YMODEM_SUPPORT=y
diff --git a/configs/am62ax_evm_a53_defconfig b/configs/am62ax_evm_a53_defconfig
index b905ff74f2a..24be88b52e7 100644
--- a/configs/am62ax_evm_a53_defconfig
+++ b/configs/am62ax_evm_a53_defconfig
@@ -31,7 +31,6 @@ CONFIG_SPL_MAX_SIZE=0x58000
 CONFIG_SPL_PAD_TO=0x0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_DM_MAILBOX=y
diff --git a/configs/am62ax_evm_r5_defconfig b/configs/am62ax_evm_r5_defconfig
index 092d0830623..2fe6c49b80f 100644
--- a/configs/am62ax_evm_r5_defconfig
+++ b/configs/am62ax_evm_r5_defconfig
@@ -40,7 +40,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_DM_MAILBOX=y
@@ -48,7 +47,6 @@ CONFIG_SPL_MTD=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_THERMAL=y
diff --git a/configs/am62px_evm_r5_defconfig b/configs/am62px_evm_r5_defconfig
index 4f7be44cfba..0cdbd30a760 100644
--- a/configs/am62px_evm_r5_defconfig
+++ b/configs/am62px_evm_r5_defconfig
@@ -41,14 +41,12 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/am62x_a53_android.config b/configs/am62x_a53_android.config
new file mode 100644
index 00000000000..adbe2b8e126
--- /dev/null
+++ b/configs/am62x_a53_android.config
@@ -0,0 +1,21 @@
+# Defconfig fragment for enabling Android boot flow
+# to apply on top of am62x_evm_a53_defconfig or am62x_lpsk_a53_defconfig
+# Enable fastboot
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
+CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_CMD_GPT=y # Needed for FASTBOOT_CMD_OEM_FORMAT
+CONFIG_RANDOM_UUID=y # Needed for FASTBOOT_CMD_OEM_FORMAT
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+# Enable Android boot flow
+CONFIG_BOOTMETH_ANDROID=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_MALLOC_LEN=0x08000000
+CONFIG_AVB_VERIFY=y
+CONFIG_LIBAVB=y
+CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ABOOTIMG=y
+CONFIG_CMD_AB_SELECT=y
+CONFIG_CMD_AVB=y
diff --git a/configs/am62x_beagleplay_r5_defconfig b/configs/am62x_beagleplay_r5_defconfig
index ee4c43ff97f..0038747155e 100644
--- a/configs/am62x_beagleplay_r5_defconfig
+++ b/configs/am62x_beagleplay_r5_defconfig
@@ -46,12 +46,10 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_YMODEM_SUPPORT=y
diff --git a/configs/am62x_evm_r5_defconfig b/configs/am62x_evm_r5_defconfig
index 78ed3f62d06..3019525e91e 100644
--- a/configs/am62x_evm_r5_defconfig
+++ b/configs/am62x_evm_r5_defconfig
@@ -48,13 +48,11 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/am64x_evm_r5_defconfig b/configs/am64x_evm_r5_defconfig
index 1e83b7ff1fe..599115a2445 100644
--- a/configs/am64x_evm_r5_defconfig
+++ b/configs/am64x_evm_r5_defconfig
@@ -35,8 +35,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run distro_bootcmd"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
@@ -51,7 +49,6 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -63,7 +60,6 @@ CONFIG_SPL_NET=y
 CONFIG_SPL_NET_VCI_STRING="AM64X U-Boot R5 SPL"
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig
index f22b9afdb3b..9dc3f15ef45 100644
--- a/configs/am65x_evm_a53_defconfig
+++ b/configs/am65x_evm_a53_defconfig
@@ -45,7 +45,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -56,7 +55,6 @@ CONFIG_SPL_MTD=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
@@ -67,6 +65,7 @@ CONFIG_CMD_DFU=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_USB=y
@@ -74,7 +73,6 @@ CONFIG_CMD_TIME=y
 CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs)"
 CONFIG_CMD_UBI=y
-CONFIG_MMC_SPEED_MODE_SET=y
 # CONFIG_ISO_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig
index 1660bf93530..f60003b19ce 100644
--- a/configs/am65x_evm_r5_defconfig
+++ b/configs/am65x_evm_r5_defconfig
@@ -25,6 +25,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x41c7effc
 CONFIG_SPL_BSS_MAX_SIZE=0xc00
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL_SIZE_LIMIT=0x7ec00
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x2000
 CONFIG_SPL_FS_FAT=y
@@ -33,7 +34,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_BOOTCOMMAND=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
@@ -47,7 +47,6 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C=y
@@ -55,7 +54,6 @@ CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/am65x_evm_r5_usbdfu_defconfig b/configs/am65x_evm_r5_usbdfu_defconfig
index 953487ccfbf..036b30d9e3a 100644
--- a/configs/am65x_evm_r5_usbdfu_defconfig
+++ b/configs/am65x_evm_r5_usbdfu_defconfig
@@ -23,13 +23,13 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x41c7effc
 CONFIG_SPL_BSS_MAX_SIZE=0xc00
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL_SIZE_LIMIT=0x7ec00
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x2000
 CONFIG_SPL_LIBDISK_SUPPORT=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_BOOTCOMMAND=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
@@ -48,7 +48,6 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_YMODEM_SUPPORT=y
diff --git a/configs/am65x_evm_r5_usbmsc_defconfig b/configs/am65x_evm_r5_usbmsc_defconfig
index 01517619272..44c18ce9cca 100644
--- a/configs/am65x_evm_r5_usbmsc_defconfig
+++ b/configs/am65x_evm_r5_usbmsc_defconfig
@@ -23,13 +23,13 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x41c7effc
 CONFIG_SPL_BSS_MAX_SIZE=0xc00
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL_SIZE_LIMIT=0x7ec00
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x2000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_BOOTCOMMAND=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
@@ -48,7 +48,6 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_YMODEM_SUPPORT=y
diff --git a/configs/amd_versal2_mini_defconfig b/configs/amd_versal2_mini_defconfig
index 0dd2305bfb2..d4760e40223 100644
--- a/configs/amd_versal2_mini_defconfig
+++ b/configs/amd_versal2_mini_defconfig
@@ -12,11 +12,11 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF20000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
+CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_DEBUG_UART_BASE=0xf1920000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
diff --git a/configs/amd_versal2_mini_emmc_defconfig b/configs/amd_versal2_mini_emmc_defconfig
index 7ad44386a6d..d2de379d07c 100644
--- a/configs/amd_versal2_mini_emmc_defconfig
+++ b/configs/amd_versal2_mini_emmc_defconfig
@@ -9,13 +9,14 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
+CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_DEBUG_UART_BASE=0xf1920000
 CONFIG_DEBUG_UART_CLOCK=100000000
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_DEBUG_UART=y
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_CPUINFO is not set
@@ -65,5 +66,4 @@ CONFIG_ARM_DCC=y
 CONFIG_PL01X_SERIAL=y
 CONFIG_FAT_WRITE=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/amd_versal2_mini_ospi_defconfig b/configs/amd_versal2_mini_ospi_defconfig
index 2242960392f..22a8bfa8511 100644
--- a/configs/amd_versal2_mini_ospi_defconfig
+++ b/configs/amd_versal2_mini_ospi_defconfig
@@ -12,11 +12,11 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF20000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
+CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_DEBUG_UART_BASE=0xf1920000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_DEBUG_UART=y
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
diff --git a/configs/amd_versal2_mini_qspi_defconfig b/configs/amd_versal2_mini_qspi_defconfig
index 3360c1546a2..de404b0f658 100644
--- a/configs/amd_versal2_mini_qspi_defconfig
+++ b/configs/amd_versal2_mini_qspi_defconfig
@@ -12,11 +12,11 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF20000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
+CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_DEBUG_UART_BASE=0xf1920000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_DEBUG_UART=y
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
diff --git a/configs/amd_versal2_virt_defconfig b/configs/amd_versal2_virt_defconfig
index 78f6ffcc3a7..00518dda63d 100644
--- a/configs/amd_versal2_virt_defconfig
+++ b/configs/amd_versal2_virt_defconfig
@@ -8,17 +8,17 @@ CONFIG_SYS_MALLOC_F_LEN=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-virt"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x6400000
+CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_DEBUG_UART_BASE=0xf1920000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_CMD_FRU=y
-CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x6400000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=5
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
@@ -38,6 +38,7 @@ CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_SPI=y
@@ -60,7 +61,6 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_SQUASHFS=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_UBI=y
-CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_OF_BOARD=y
 CONFIG_DTB_RESELECT=y
diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig
index a03509bf467..83337d68cc0 100644
--- a/configs/anbernic-rgxx3-rk3566_defconfig
+++ b/configs/anbernic-rgxx3-rk3566_defconfig
@@ -8,10 +8,11 @@ CONFIG_ROCKCHIP_RK3568=y
 CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_ANBERNIC_RGXX3_RK3566=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_FIT_SIGNATURE=y
@@ -80,4 +81,3 @@ CONFIG_VIDEO_BRIDGE=y
 CONFIG_REGEX=y
 # CONFIG_RSA is not set
 CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
index 4f916030983..353aa0abb1f 100644
--- a/configs/ap121_defconfig
+++ b/configs/ap121_defconfig
@@ -7,10 +7,10 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x40000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="ap121"
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_DEBUG_UART_BASE=0xb8020000
 CONFIG_DEBUG_UART_CLOCK=25000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_ARCH_ATH79=y
 CONFIG_SYS_MIPS_TIMER_FREQ=200000000
 CONFIG_DEBUG_UART=y
diff --git a/configs/ap143_defconfig b/configs/ap143_defconfig
index c22048c1b53..9d503bdf61f 100644
--- a/configs/ap143_defconfig
+++ b/configs/ap143_defconfig
@@ -8,10 +8,10 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x40000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="ap143"
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_DEBUG_UART_BASE=0xb8020000
 CONFIG_DEBUG_UART_CLOCK=25000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_ARCH_ATH79=y
 CONFIG_TARGET_AP143=y
 CONFIG_SYS_MIPS_TIMER_FREQ=325000000
diff --git a/configs/ap152_defconfig b/configs/ap152_defconfig
index ec700a5b3f0..d830a85be69 100644
--- a/configs/ap152_defconfig
+++ b/configs/ap152_defconfig
@@ -8,10 +8,10 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x40000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="ap152"
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_DEBUG_UART_BASE=0xb8020000
 CONFIG_DEBUG_UART_CLOCK=25000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_ARCH_ATH79=y
 CONFIG_TARGET_AP152=y
 CONFIG_SYS_MIPS_TIMER_FREQ=375000000
diff --git a/configs/apalis-imx8_defconfig b/configs/apalis-imx8_defconfig
index 466147f3bf2..795cdc27f7f 100644
--- a/configs/apalis-imx8_defconfig
+++ b/configs/apalis-imx8_defconfig
@@ -13,12 +13,13 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-apalis"
 CONFIG_BOOTAUX_RESERVED_MEM_BASE=0x88000000
 CONFIG_BOOTAUX_RESERVED_MEM_SIZE=0x08000000
 CONFIG_TARGET_APALIS_IMX8=y
-CONFIG_IMX_BOOTAUX=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_LOAD_ADDR=0x95400000
+CONFIG_IMX_BOOTAUX=y
 CONFIG_SYS_MEMTEST_START=0x88000000
 CONFIG_SYS_MEMTEST_END=0x89000000
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
@@ -92,4 +93,3 @@ CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_DM_THERMAL=y
 CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig
index 20c9c06cdea..7fa6161f22a 100644
--- a/configs/apalis-tk1_defconfig
+++ b/configs/apalis-tk1_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra124-apalis"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA124=y
 CONFIG_TARGET_APALIS_TK1=y
 CONFIG_TEGRA_GPU=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_PCI=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
index 6d70cc201c7..92d304a880d 100644
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@@ -21,9 +21,9 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=409600
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0x14200000
 CONFIG_SPL=y
 CONFIG_CMD_HDMIDETECT=y
-CONFIG_SYS_LOAD_ADDR=0x14200000
 CONFIG_AHCI=y
 CONFIG_SYS_MEMTEST_START=0x10000000
 CONFIG_SYS_MEMTEST_END=0x10010000
diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig
index 03a1f2c2390..d7da23ed752 100644
--- a/configs/apalis_t30_defconfig
+++ b/configs/apalis_t30_defconfig
@@ -10,9 +10,9 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra30-apalis"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_APALIS_T30=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_PCI=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_CBSIZE=1024
diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
index dca6e0ca8ba..6a5affcaca9 100644
--- a/configs/apple_m1_defconfig
+++ b/configs/apple_m1_defconfig
@@ -1,8 +1,8 @@
 CONFIG_ARM=y
 CONFIG_ARCH_APPLE=y
 CONFIG_DEFAULT_DEVICE_TREE="t8103-j274"
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_BOOTCOMMAND="bootflow scan -b"
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/arbel_evb_defconfig b/configs/arbel_evb_defconfig
index 9983d3a58b2..2ef2e253b47 100644
--- a/configs/arbel_evb_defconfig
+++ b/configs/arbel_evb_defconfig
@@ -12,15 +12,16 @@ CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="nuvoton-npcm845-evb"
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x1400000
+CONFIG_SYS_LOAD_ADDR=0x06208000
 # CONFIG_PSCI_RESET is not set
 CONFIG_ARCH_NPCM8XX=y
 CONFIG_SYS_SKIP_UART_INIT=y
 CONFIG_TARGET_ARBEL_EVB=y
-CONFIG_SYS_LOAD_ADDR=0x06208000
 CONFIG_ENV_ADDR=0x807C0000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x1400000
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run common_bootargs; run romboot"
 CONFIG_LAST_STAGE_INIT=y
@@ -105,4 +106,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_LIB_HW_RAND=y
 CONFIG_TPM=y
 CONFIG_SHA_HW_ACCEL=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/aristainetos2c_defconfig b/configs/aristainetos2c_defconfig
index 0448b169ce5..95d6f3f7246 100644
--- a/configs/aristainetos2c_defconfig
+++ b/configs/aristainetos2c_defconfig
@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2c_7"
 CONFIG_ENV_OFFSET_REDUND=0xE0000
 CONFIG_IMX_HAB=y
 # CONFIG_CMD_DEKBLOB is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=-2
@@ -122,4 +123,3 @@ CONFIG_SPLASH_SCREEN=y
 CONFIG_SPLASH_SCREEN_ALIGN=y
 CONFIG_BMP_16BPP=y
 CONFIG_IMX_WATCHDOG=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/aristainetos2ccslb_defconfig b/configs/aristainetos2ccslb_defconfig
index 23ea99619a4..7de378388fa 100644
--- a/configs/aristainetos2ccslb_defconfig
+++ b/configs/aristainetos2ccslb_defconfig
@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2c_cslb_7"
 CONFIG_ENV_OFFSET_REDUND=0xE0000
 CONFIG_IMX_HAB=y
 # CONFIG_CMD_DEKBLOB is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=-2
@@ -122,4 +123,3 @@ CONFIG_SPLASH_SCREEN=y
 CONFIG_SPLASH_SCREEN_ALIGN=y
 CONFIG_BMP_16BPP=y
 CONFIG_IMX_WATCHDOG=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig
index b664ad58773..d2564aa288c 100644
--- a/configs/arndale_defconfig
+++ b/configs/arndale_defconfig
@@ -15,9 +15,9 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x86200
 CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale"
 CONFIG_SPL_TEXT_BASE=0x02023400
+CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_SPL=y
 CONFIG_IDENT_STRING=" for ARNDALE"
-CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_FIT=y
 CONFIG_FIT_BEST_MATCH=y
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/at91sam9260ek_dataflash_cs0_defconfig b/configs/at91sam9260ek_dataflash_cs0_defconfig
index 97c8e982542..6c8e4b2ea08 100644
--- a/configs/at91sam9260ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9260ek_dataflash_cs0_defconfig
@@ -13,10 +13,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9260ek_dataflash_cs1_defconfig b/configs/at91sam9260ek_dataflash_cs1_defconfig
index 6c60df2a71a..cfffdfa4542 100644
--- a/configs/at91sam9260ek_dataflash_cs1_defconfig
+++ b/configs/at91sam9260ek_dataflash_cs1_defconfig
@@ -13,10 +13,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9260ek_nandflash_defconfig b/configs/at91sam9260ek_nandflash_defconfig
index 0f0aa281c00..dc633aa2579 100644
--- a/configs/at91sam9260ek_nandflash_defconfig
+++ b/configs/at91sam9260ek_nandflash_defconfig
@@ -10,11 +10,11 @@ CONFIG_AT91SAM9260EK=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9261ek_dataflash_cs0_defconfig b/configs/at91sam9261ek_dataflash_cs0_defconfig
index 81a149d2b30..4883a80fb19 100644
--- a/configs/at91sam9261ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9261ek_dataflash_cs0_defconfig
@@ -12,10 +12,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig
index b45bfa28f85..c4fdc9cbdcb 100644
--- a/configs/at91sam9261ek_dataflash_cs3_defconfig
+++ b/configs/at91sam9261ek_dataflash_cs3_defconfig
@@ -12,10 +12,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig
index fe3ac582d15..9051db468bb 100644
--- a/configs/at91sam9261ek_nandflash_defconfig
+++ b/configs/at91sam9261ek_nandflash_defconfig
@@ -9,11 +9,11 @@ CONFIG_AT91SAM9261EK=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig
index de615d5b9c3..3feb7c0ddae 100644
--- a/configs/at91sam9263ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9263ek_dataflash_cs0_defconfig
@@ -12,10 +12,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9263ek_dataflash_defconfig b/configs/at91sam9263ek_dataflash_defconfig
index de615d5b9c3..3feb7c0ddae 100644
--- a/configs/at91sam9263ek_dataflash_defconfig
+++ b/configs/at91sam9263ek_dataflash_defconfig
@@ -12,10 +12,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig
index dcb41e34961..d7c850e787d 100644
--- a/configs/at91sam9263ek_nandflash_defconfig
+++ b/configs/at91sam9263ek_nandflash_defconfig
@@ -9,11 +9,11 @@ CONFIG_ATMEL_LEGACY=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig
index 74d337306e1..102dedba9f0 100644
--- a/configs/at91sam9263ek_norflash_boot_defconfig
+++ b/configs/at91sam9263ek_norflash_boot_defconfig
@@ -12,10 +12,10 @@ CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
 CONFIG_SYS_MONITOR_LEN=262144
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_ENV_ADDR=0x107E0000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MONITOR_BASE=0x10000000
diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig
index 9c0bf3dafb1..c8783b00ab1 100644
--- a/configs/at91sam9263ek_norflash_defconfig
+++ b/configs/at91sam9263ek_norflash_defconfig
@@ -13,10 +13,10 @@ CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
 CONFIG_SYS_MONITOR_LEN=262144
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_ENV_ADDR=0x107E0000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MONITOR_BASE=0x10000000
diff --git a/configs/at91sam9g10ek_dataflash_cs0_defconfig b/configs/at91sam9g10ek_dataflash_cs0_defconfig
index 8e6afbc00c3..4c07fce7050 100644
--- a/configs/at91sam9g10ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9g10ek_dataflash_cs0_defconfig
@@ -12,10 +12,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9g10ek_dataflash_cs3_defconfig b/configs/at91sam9g10ek_dataflash_cs3_defconfig
index 8537d757101..64ec4bb9cd5 100644
--- a/configs/at91sam9g10ek_dataflash_cs3_defconfig
+++ b/configs/at91sam9g10ek_dataflash_cs3_defconfig
@@ -12,10 +12,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig
index a8e5cee87a1..6d955558537 100644
--- a/configs/at91sam9g10ek_nandflash_defconfig
+++ b/configs/at91sam9g10ek_nandflash_defconfig
@@ -9,11 +9,11 @@ CONFIG_AT91SAM9G10=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig
index a7f805ff99c..256552f8dc6 100644
--- a/configs/at91sam9g20ek_2mmc_defconfig
+++ b/configs/at91sam9g20ek_2mmc_defconfig
@@ -13,10 +13,10 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x2000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek_2mmc"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9g20ek_2mmc_nandflash_defconfig b/configs/at91sam9g20ek_2mmc_nandflash_defconfig
index fafa35e8714..5c134c98041 100644
--- a/configs/at91sam9g20ek_2mmc_nandflash_defconfig
+++ b/configs/at91sam9g20ek_2mmc_nandflash_defconfig
@@ -11,11 +11,11 @@ CONFIG_AT91SAM9G20EK_2MMC=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek_2mmc"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9g20ek_dataflash_cs0_defconfig b/configs/at91sam9g20ek_dataflash_cs0_defconfig
index 0b6e4c1b14e..b403766687b 100644
--- a/configs/at91sam9g20ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9g20ek_dataflash_cs0_defconfig
@@ -13,10 +13,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9g20ek_dataflash_cs1_defconfig b/configs/at91sam9g20ek_dataflash_cs1_defconfig
index aa6b1866974..878c04ca9f1 100644
--- a/configs/at91sam9g20ek_dataflash_cs1_defconfig
+++ b/configs/at91sam9g20ek_dataflash_cs1_defconfig
@@ -13,10 +13,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9g20ek_nandflash_defconfig b/configs/at91sam9g20ek_nandflash_defconfig
index 299a9ed7914..f8173f450be 100644
--- a/configs/at91sam9g20ek_nandflash_defconfig
+++ b/configs/at91sam9g20ek_nandflash_defconfig
@@ -10,11 +10,11 @@ CONFIG_AT91SAM9260EK=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig
index f776a4ad7f5..34d826447f7 100644
--- a/configs/at91sam9m10g45ek_mmc_defconfig
+++ b/configs/at91sam9m10g45ek_mmc_defconfig
@@ -12,10 +12,10 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig
index ab5e651d6ac..ad8a82b8491 100644
--- a/configs/at91sam9m10g45ek_nandflash_defconfig
+++ b/configs/at91sam9m10g45ek_nandflash_defconfig
@@ -11,11 +11,11 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70003f00
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig
index 0f8ffc9a7c1..88e0f6c5032 100644
--- a/configs/at91sam9n12ek_mmc_defconfig
+++ b/configs/at91sam9n12ek_mmc_defconfig
@@ -11,10 +11,10 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig
index f2f0a2610e4..0bfc8565e82 100644
--- a/configs/at91sam9n12ek_nandflash_defconfig
+++ b/configs/at91sam9n12ek_nandflash_defconfig
@@ -10,11 +10,11 @@ CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig
index 9a72d37448e..b329a96b455 100644
--- a/configs/at91sam9n12ek_spiflash_defconfig
+++ b/configs/at91sam9n12ek_spiflash_defconfig
@@ -13,10 +13,10 @@ CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_SPI_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig
index 931af2b2fda..141e83fe5fd 100644
--- a/configs/at91sam9rlek_dataflash_defconfig
+++ b/configs/at91sam9rlek_dataflash_defconfig
@@ -12,10 +12,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig
index 70d431c1f52..d497d59a073 100644
--- a/configs/at91sam9rlek_mmc_defconfig
+++ b/configs/at91sam9rlek_mmc_defconfig
@@ -10,10 +10,10 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig
index 1277a357cd2..1bcdab8e5aa 100644
--- a/configs/at91sam9rlek_nandflash_defconfig
+++ b/configs/at91sam9rlek_nandflash_defconfig
@@ -9,11 +9,11 @@ CONFIG_ATMEL_LEGACY=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig
index cc50f4cb39a..633dae970ad 100644
--- a/configs/at91sam9x5ek_dataflash_defconfig
+++ b/configs/at91sam9x5ek_dataflash_defconfig
@@ -15,10 +15,10 @@ CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig
index eb1fcd484cc..82db49e52f6 100644
--- a/configs/at91sam9x5ek_mmc_defconfig
+++ b/configs/at91sam9x5ek_mmc_defconfig
@@ -13,10 +13,10 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
index dc09003d0b2..d512dd6858f 100644
--- a/configs/at91sam9x5ek_nandflash_defconfig
+++ b/configs/at91sam9x5ek_nandflash_defconfig
@@ -12,11 +12,11 @@ CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_NAND_BOOT=y
diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig
index 63a9569bbec..ba5b9c674d2 100644
--- a/configs/at91sam9x5ek_spiflash_defconfig
+++ b/configs/at91sam9x5ek_spiflash_defconfig
@@ -15,10 +15,10 @@ CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_SPI_BOOT=y
diff --git a/configs/at91sam9xeek_dataflash_cs0_defconfig b/configs/at91sam9xeek_dataflash_cs0_defconfig
index 97c8e982542..6c8e4b2ea08 100644
--- a/configs/at91sam9xeek_dataflash_cs0_defconfig
+++ b/configs/at91sam9xeek_dataflash_cs0_defconfig
@@ -13,10 +13,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9xeek_dataflash_cs1_defconfig b/configs/at91sam9xeek_dataflash_cs1_defconfig
index 6c60df2a71a..cfffdfa4542 100644
--- a/configs/at91sam9xeek_dataflash_cs1_defconfig
+++ b/configs/at91sam9xeek_dataflash_cs1_defconfig
@@ -13,10 +13,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/at91sam9xeek_nandflash_defconfig b/configs/at91sam9xeek_nandflash_defconfig
index 0f0aa281c00..dc633aa2579 100644
--- a/configs/at91sam9xeek_nandflash_defconfig
+++ b/configs/at91sam9xeek_nandflash_defconfig
@@ -10,11 +10,11 @@ CONFIG_AT91SAM9260EK=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index 8588f8c5adf..7fd9e4046f2 100644
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -24,13 +24,13 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3e00
 CONFIG_SPL_BSS_MAX_SIZE=0x600
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=18432000
 CONFIG_ENV_OFFSET_REDUND=0x180000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/axs101_defconfig b/configs/axs101_defconfig
index e9ed68d4335..8ab5addf90e 100644
--- a/configs/axs101_defconfig
+++ b/configs/axs101_defconfig
@@ -7,12 +7,12 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="axs101"
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART_BASE=0xe0022000
 CONFIG_DEBUG_UART_CLOCK=33333333
 CONFIG_SYS_CLK_FREQ=750000000
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS3,115200n8"
diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig
index 0c4917a315a..c852bd9eed7 100644
--- a/configs/axs103_defconfig
+++ b/configs/axs103_defconfig
@@ -7,12 +7,12 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="axs103"
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART_BASE=0xe0022000
 CONFIG_DEBUG_UART_CLOCK=33333333
 CONFIG_SYS_CLK_FREQ=100000000
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS3,115200n8"
diff --git a/configs/bananapi-cm4-cm4io_defconfig b/configs/bananapi-cm4-cm4io_defconfig
index cb78dabc13a..51ef5368b56 100644
--- a/configs/bananapi-cm4-cm4io_defconfig
+++ b/configs/bananapi-cm4-cm4io_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-bananapi-cm4-cm4io"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING="bpi-cm4io"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
diff --git a/configs/bananapi-m2-pro_defconfig b/configs/bananapi-m2-pro_defconfig
index 196bc4077d6..1ce163b9cbe 100644
--- a/configs/bananapi-m2-pro_defconfig
+++ b/configs/bananapi-m2-pro_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-bananapi-m2-pro"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING="bpi-m2-pro"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/bananapi-m2s_defconfig b/configs/bananapi-m2s_defconfig
index 7b137d5e1c4..d6440e33bf5 100644
--- a/configs/bananapi-m2s_defconfig
+++ b/configs/bananapi-m2s_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-a311d-bananapi-m2s"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" bpi-m2s"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/bananapi-m5_defconfig b/configs/bananapi-m5_defconfig
index 99ed7c9669a..a471f081607 100644
--- a/configs/bananapi-m5_defconfig
+++ b/configs/bananapi-m5_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-bananapi-m5"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING="bpi-m5"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/bcm7260_defconfig b/configs/bcm7260_defconfig
index 2bf3c0d7fbe..aeb1f907199 100644
--- a/configs/bcm7260_defconfig
+++ b/configs/bcm7260_defconfig
@@ -9,11 +9,12 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x814800
 CONFIG_DEFAULT_DEVICE_TREE="bcm7xxx"
-CONFIG_ENV_OFFSET_REDUND=0x824800
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x02000000
+CONFIG_ENV_OFFSET_REDUND=0x824800
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_BOOTDELAY=1
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="fdt addr ${fdtcontroladdr};fdt move ${fdtcontroladdr} ${fdtsaveaddr};fdt addr ${fdtsaveaddr};"
@@ -42,4 +43,3 @@ CONFIG_MTD=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 # CONFIG_RANDOM_UUID is not set
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/bcm7445_defconfig b/configs/bcm7445_defconfig
index 07e3b57ac33..03012056fbb 100644
--- a/configs/bcm7445_defconfig
+++ b/configs/bcm7445_defconfig
@@ -10,11 +10,12 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x1E0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="bcm7xxx"
-CONFIG_ENV_OFFSET_REDUND=0x1F0000
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x02000000
+CONFIG_ENV_OFFSET_REDUND=0x1F0000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_BOOTDELAY=1
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="fdt addr ${fdtcontroladdr};fdt move ${fdtcontroladdr} ${fdtsaveaddr};fdt addr ${fdtsaveaddr};"
@@ -49,4 +50,3 @@ CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_BCMSTB_SPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/bcm947622_defconfig b/configs/bcm947622_defconfig
index c5663ab0854..71057f1dc04 100644
--- a/configs/bcm947622_defconfig
+++ b/configs/bcm947622_defconfig
@@ -9,10 +9,10 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm947622"
-CONFIG_IDENT_STRING=" Broadcom BCM47622"
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM47622"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_HUSH_PARSER=y
diff --git a/configs/bcm94908_defconfig b/configs/bcm94908_defconfig
index cfb51e10233..3979c29e932 100644
--- a/configs/bcm94908_defconfig
+++ b/configs/bcm94908_defconfig
@@ -10,8 +10,8 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm94908"
-CONFIG_IDENT_STRING=" Broadcom BCM4908"
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM4908"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/bcm94912_defconfig b/configs/bcm94912_defconfig
index 67b1d90705a..5b6de30cd8b 100644
--- a/configs/bcm94912_defconfig
+++ b/configs/bcm94912_defconfig
@@ -10,8 +10,8 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm94912"
-CONFIG_IDENT_STRING=" Broadcom BCM4912"
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM4912"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/bcm963138_defconfig b/configs/bcm963138_defconfig
index 966ae6c2a50..cc2ffe5fcd2 100644
--- a/configs/bcm963138_defconfig
+++ b/configs/bcm963138_defconfig
@@ -9,10 +9,10 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm963138"
-CONFIG_IDENT_STRING=" Broadcom BCM63138"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM63138"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_HUSH_PARSER=y
diff --git a/configs/bcm963146_defconfig b/configs/bcm963146_defconfig
index 94e1d277a09..5033b069d7d 100644
--- a/configs/bcm963146_defconfig
+++ b/configs/bcm963146_defconfig
@@ -10,8 +10,8 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm963146"
-CONFIG_IDENT_STRING=" Broadcom BCM63146"
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM63146"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/bcm963148_defconfig b/configs/bcm963148_defconfig
index 8f451982acd..a0dd06ba505 100644
--- a/configs/bcm963148_defconfig
+++ b/configs/bcm963148_defconfig
@@ -10,10 +10,10 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm963148"
-CONFIG_IDENT_STRING=" Broadcom BCM63148"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM63148"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_HUSH_PARSER=y
diff --git a/configs/bcm963158_defconfig b/configs/bcm963158_defconfig
index 699b200d1c1..c3010d97908 100644
--- a/configs/bcm963158_defconfig
+++ b/configs/bcm963158_defconfig
@@ -10,8 +10,8 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm963158"
-CONFIG_IDENT_STRING=" Broadcom BCM63158"
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM63158"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/bcm963178_defconfig b/configs/bcm963178_defconfig
index a3902cf288f..1409febae14 100644
--- a/configs/bcm963178_defconfig
+++ b/configs/bcm963178_defconfig
@@ -10,10 +10,10 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm963178"
-CONFIG_IDENT_STRING=" Broadcom BCM63178"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM63178"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_HUSH_PARSER=y
diff --git a/configs/bcm96756_defconfig b/configs/bcm96756_defconfig
index e90f46487d7..96a9a311037 100644
--- a/configs/bcm96756_defconfig
+++ b/configs/bcm96756_defconfig
@@ -10,10 +10,10 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm96756"
-CONFIG_IDENT_STRING=" Broadcom BCM6756"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM6756"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_HUSH_PARSER=y
diff --git a/configs/bcm96813_defconfig b/configs/bcm96813_defconfig
index ece549be9e5..eadcb6374c6 100644
--- a/configs/bcm96813_defconfig
+++ b/configs/bcm96813_defconfig
@@ -10,8 +10,8 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm96813"
-CONFIG_IDENT_STRING=" Broadcom BCM6813"
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM6813"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/bcm96846_defconfig b/configs/bcm96846_defconfig
index 467f4de439e..ea643eddcc6 100644
--- a/configs/bcm96846_defconfig
+++ b/configs/bcm96846_defconfig
@@ -10,10 +10,10 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm96846"
-CONFIG_IDENT_STRING=" Broadcom BCM6846"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM6846"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_HUSH_PARSER=y
diff --git a/configs/bcm96855_defconfig b/configs/bcm96855_defconfig
index 2febb47bb40..6ffae45faa2 100644
--- a/configs/bcm96855_defconfig
+++ b/configs/bcm96855_defconfig
@@ -10,10 +10,10 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm96855"
-CONFIG_IDENT_STRING=" Broadcom BCM6855"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM6855"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_HUSH_PARSER=y
diff --git a/configs/bcm96856_defconfig b/configs/bcm96856_defconfig
index 728dadf5fc0..f926b3770f0 100644
--- a/configs/bcm96856_defconfig
+++ b/configs/bcm96856_defconfig
@@ -10,8 +10,8 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm96856"
-CONFIG_IDENT_STRING=" Broadcom BCM6856"
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM6856"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/bcm96858_defconfig b/configs/bcm96858_defconfig
index aafa1d0c061..cc6069fe794 100644
--- a/configs/bcm96858_defconfig
+++ b/configs/bcm96858_defconfig
@@ -10,8 +10,8 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm96858"
-CONFIG_IDENT_STRING=" Broadcom BCM6858"
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM6858"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/bcm96878_defconfig b/configs/bcm96878_defconfig
index 1b271feaf76..7d1cd6c944f 100644
--- a/configs/bcm96878_defconfig
+++ b/configs/bcm96878_defconfig
@@ -10,10 +10,10 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="bcm96878"
-CONFIG_IDENT_STRING=" Broadcom BCM6878"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_IDENT_STRING=" Broadcom BCM6878"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_HUSH_PARSER=y
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 6e637db73e1..a9236161ca1 100644
--- a/configs/bcm_ns3_defconfig
+++ b/configs/bcm_ns3_defconfig
@@ -9,13 +9,13 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x0
 CONFIG_ENV_SIZE=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="ns3-board"
+CONFIG_SYS_BOOTM_LEN=0x1800000
 CONFIG_SYS_LOAD_ADDR=0x80080000
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_SIGNATURE_MAX_SIZE=0x20000000
 CONFIG_FIT_VERBOSE=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_SYS_BOOTM_LEN=0x1800000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/bcmns_defconfig b/configs/bcmns_defconfig
index 365284e94c3..989017b96d9 100644
--- a/configs/bcmns_defconfig
+++ b/configs/bcmns_defconfig
@@ -7,9 +7,10 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x00100000
 CONFIG_DEFAULT_DEVICE_TREE="ns-board"
-CONFIG_IDENT_STRING="Broadcom Northstar"
 CONFIG_SYS_LOAD_ADDR=0x00008000
+CONFIG_IDENT_STRING="Broadcom Northstar"
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_BOOTSTD is not set
 CONFIG_BOOTDELAY=1
 CONFIG_AUTOBOOT_KEYED=y
@@ -33,4 +34,3 @@ CONFIG_CLK=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig
index d8d8b6cf07c..17a1b18bed6 100644
--- a/configs/beaver_defconfig
+++ b/configs/beaver_defconfig
@@ -11,9 +11,9 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-beaver"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_BEAVER=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_PCI=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2084
diff --git a/configs/beelink-gsking-x_defconfig b/configs/beelink-gsking-x_defconfig
index c1e60ede4a0..a25f42f7b6c 100644
--- a/configs/beelink-gsking-x_defconfig
+++ b/configs/beelink-gsking-x_defconfig
@@ -11,10 +11,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-gsking-x"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" beelink"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/beelink-gt1-ultimate_defconfig b/configs/beelink-gt1-ultimate_defconfig
index 0e30e13c823..489818096c7 100644
--- a/configs/beelink-gt1-ultimate_defconfig
+++ b/configs/beelink-gt1-ultimate_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxm-gt1-ultimate"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXM=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" beelink-gt1"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/beelink-gtking_defconfig b/configs/beelink-gtking_defconfig
index 0b644f0e349..b5229ee0377 100644
--- a/configs/beelink-gtking_defconfig
+++ b/configs/beelink-gtking_defconfig
@@ -11,10 +11,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-gtking"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" beelink"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/beelink-gtkingpro_defconfig b/configs/beelink-gtkingpro_defconfig
index a694617a968..fe8e9a8cc0d 100644
--- a/configs/beelink-gtkingpro_defconfig
+++ b/configs/beelink-gtkingpro_defconfig
@@ -11,10 +11,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-gtking-pro"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" beelink"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/bitmain_antminer_s9_defconfig b/configs/bitmain_antminer_s9_defconfig
index afe8de81ab7..f8ea8f91a2d 100644
--- a/configs/bitmain_antminer_s9_defconfig
+++ b/configs/bitmain_antminer_s9_defconfig
@@ -16,18 +16,20 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x100000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x3c00000
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
 CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_PBSIZE=2075
@@ -97,5 +99,3 @@ CONFIG_ZYNQ_SERIAL=y
 CONFIG_WDT=y
 CONFIG_WDT_CDNS=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
diff --git a/configs/bk4r1_defconfig b/configs/bk4r1_defconfig
index 21fdcd32891..2cd3762dbf1 100644
--- a/configs/bk4r1_defconfig
+++ b/configs/bk4r1_defconfig
@@ -12,15 +12,16 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="vf610-bk4r1"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x4006e02c
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_OFFSET_REDUND=0x220000
 CONFIG_TARGET_BK4R1=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_SYS_MEMTEST_START=0x80010000
 CONFIG_SYS_MEMTEST_END=0x87c00000
 CONFIG_LTO=y
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=520192
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
@@ -92,4 +93,3 @@ CONFIG_FSL_LPUART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/blanche_defconfig b/configs/blanche_defconfig
index a2823a614a5..aa30585c69d 100644
--- a/configs/blanche_defconfig
+++ b/configs/blanche_defconfig
@@ -20,6 +20,7 @@ CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_ENV_ADDR=0x40000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CBSIZE=256
@@ -83,4 +84,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/boston32r2_defconfig b/configs/boston32r2_defconfig
index 6f0024a6663..cc4ba11e515 100644
--- a/configs/boston32r2_defconfig
+++ b/configs/boston32r2_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x88000000
 CONFIG_ENV_ADDR=0xBFFE0000
 CONFIG_TARGET_BOSTON=y
@@ -18,7 +19,6 @@ CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/boston32r2el_defconfig b/configs/boston32r2el_defconfig
index 71926429b05..f98315071db 100644
--- a/configs/boston32r2el_defconfig
+++ b/configs/boston32r2el_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x88000000
 CONFIG_ENV_ADDR=0xBFFE0000
 CONFIG_TARGET_BOSTON=y
@@ -19,7 +20,6 @@ CONFIG_SYS_LITTLE_ENDIAN=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/boston32r6_defconfig b/configs/boston32r6_defconfig
index 4335d04b39e..4a404f064ba 100644
--- a/configs/boston32r6_defconfig
+++ b/configs/boston32r6_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x88000000
 CONFIG_ENV_ADDR=0xBFFE0000
 CONFIG_TARGET_BOSTON=y
@@ -19,7 +20,6 @@ CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/boston32r6el_defconfig b/configs/boston32r6el_defconfig
index b859a4f198b..49fb7599e0a 100644
--- a/configs/boston32r6el_defconfig
+++ b/configs/boston32r6el_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x88000000
 CONFIG_ENV_ADDR=0xBFFE0000
 CONFIG_TARGET_BOSTON=y
@@ -20,7 +21,6 @@ CONFIG_SYS_LITTLE_ENDIAN=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/boston64r2_defconfig b/configs/boston64r2_defconfig
index 70354f11716..5b710fc4828 100644
--- a/configs/boston64r2_defconfig
+++ b/configs/boston64r2_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0xffffffff88000000
 CONFIG_ENV_ADDR=0xFFFFFFFFBFFE0000
 CONFIG_TARGET_BOSTON=y
@@ -19,7 +20,6 @@ CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/boston64r2el_defconfig b/configs/boston64r2el_defconfig
index eafb8c67ba7..1d4bb7d68aa 100644
--- a/configs/boston64r2el_defconfig
+++ b/configs/boston64r2el_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0xffffffff88000000
 CONFIG_ENV_ADDR=0xFFFFFFFFBFFE0000
 CONFIG_TARGET_BOSTON=y
@@ -20,7 +21,6 @@ CONFIG_SYS_LITTLE_ENDIAN=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/boston64r6_defconfig b/configs/boston64r6_defconfig
index a6c89278512..b736534d4ee 100644
--- a/configs/boston64r6_defconfig
+++ b/configs/boston64r6_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0xffffffff88000000
 CONFIG_ENV_ADDR=0xFFFFFFFFBFFE0000
 CONFIG_TARGET_BOSTON=y
@@ -19,7 +20,6 @@ CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/boston64r6el_defconfig b/configs/boston64r6el_defconfig
index 6cc227600df..caf5da3dbfd 100644
--- a/configs/boston64r6el_defconfig
+++ b/configs/boston64r6el_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="img,boston"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0xffffffff88000000
 CONFIG_ENV_ADDR=0xFFFFFFFFBFFE0000
 CONFIG_TARGET_BOSTON=y
@@ -20,7 +21,6 @@ CONFIG_SYS_LITTLE_ENDIAN=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/bpi-r2-pro-rk3568_defconfig b/configs/bpi-r2-pro-rk3568_defconfig
index eccc15a0ae5..d84ea2f955f 100644
--- a/configs/bpi-r2-pro-rk3568_defconfig
+++ b/configs/bpi-r2-pro-rk3568_defconfig
@@ -5,9 +5,9 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-bpi-r2-pro"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 CONFIG_FIT=y
diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig
index 8947b76e11f..4691bc62176 100644
--- a/configs/brppt1_mmc_defconfig
+++ b/configs/brppt1_mmc_defconfig
@@ -15,14 +15,15 @@ CONFIG_TARGET_BRPPT1=y
 # CONFIG_OF_LIBFDT_OVERLAY is not set
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x50000
-CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_LOCALVERSION="-2.0.0"
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_EXPERT is not set
+# CONFIG_EFI_LOADER is not set
 # CONFIG_FIT is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=0
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
@@ -109,4 +110,3 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_FAT_WRITE=y
 CONFIG_LZO=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/brppt2_defconfig b/configs/brppt2_defconfig
index 2f29cb3dc46..299e2633c2f 100644
--- a/configs/brppt2_defconfig
+++ b/configs/brppt2_defconfig
@@ -18,13 +18,14 @@ CONFIG_TARGET_BRPPT2=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6dl-brppt2"
 CONFIG_SPL_SERIAL=y
 CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
+CONFIG_SYS_LOAD_ADDR=0x10700000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 # CONFIG_CMD_BMODE is not set
-CONFIG_SYS_LOAD_ADDR=0x10700000
 # CONFIG_EXPERT is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_SPI_BOOT=y
 CONFIG_BOOTDELAY=0
 CONFIG_OF_BOARD_SETUP=y
@@ -34,7 +35,6 @@ CONFIG_SYS_PBSIZE=532
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC=y
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_LOAD=y
@@ -102,4 +102,3 @@ CONFIG_MXC_SPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/brsmarc1_defconfig b/configs/brsmarc1_defconfig
index a17afdee7ff..2c13976d2fc 100644
--- a/configs/brsmarc1_defconfig
+++ b/configs/brsmarc1_defconfig
@@ -16,14 +16,15 @@ CONFIG_SYS_MPUCLK=600
 CONFIG_TARGET_BRSMARC1=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x30000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x80000000
 # CONFIG_EXPERT is not set
+# CONFIG_EFI_LOADER is not set
 # CONFIG_FIT is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=0
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
@@ -118,4 +119,3 @@ CONFIG_USB_GADGET=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_SHA1=y
 CONFIG_SHA256=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/brxre1_defconfig b/configs/brxre1_defconfig
index fc801f26740..d5f378ffbee 100644
--- a/configs/brxre1_defconfig
+++ b/configs/brxre1_defconfig
@@ -15,10 +15,11 @@ CONFIG_TARGET_BRXRE1=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x50000
-CONFIG_SYS_LOAD_ADDR=0x80000000
 # CONFIG_EXPERT is not set
+# CONFIG_EFI_LOADER is not set
 # CONFIG_FIT is not set
 CONFIG_BOOTDELAY=0
 CONFIG_OF_BOARD_SETUP=y
@@ -97,4 +98,3 @@ CONFIG_USB_MUSB_TI=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/bubblegum_96_defconfig b/configs/bubblegum_96_defconfig
index 2f93a63f054..8198d51b888 100644
--- a/configs/bubblegum_96_defconfig
+++ b/configs/bubblegum_96_defconfig
@@ -7,9 +7,9 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1107ff00
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="bubblegum_96"
 CONFIG_MACH_S900=y
-CONFIG_IDENT_STRING="\nBubblegum-96"
-CONFIG_SYS_LOAD_ADDR=0x7ffc0
 CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x7ffc0
+CONFIG_IDENT_STRING="\nBubblegum-96"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig
index 52183a3e30c..7d88a25eb71 100644
--- a/configs/cardhu_defconfig
+++ b/configs/cardhu_defconfig
@@ -10,9 +10,9 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-cardhu"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_CARDHU=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_PCI=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2084
diff --git a/configs/cei-tk1-som_defconfig b/configs/cei-tk1-som_defconfig
index cd66a6da04d..28290252943 100644
--- a/configs/cei-tk1-som_defconfig
+++ b/configs/cei-tk1-som_defconfig
@@ -11,12 +11,12 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra124-cei-tk1-som"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA124=y
 CONFIG_TARGET_CEI_TK1_SOM=y
 CONFIG_TEGRA_ENABLE_UARTD=y
 CONFIG_TEGRA_GPU=y
 CONFIG_ARMV7_PSCI_0_1=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_PCI=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2086
diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig
index a9283ad49ea..37ae957db03 100644
--- a/configs/cgtqmx8_defconfig
+++ b/configs/cgtqmx8_defconfig
@@ -20,13 +20,14 @@ CONFIG_SPL_STACK=0x13e000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x128000
 CONFIG_SPL_BSS_MAX_SIZE=0x1000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_LOAD_ADDR=0x80280000
+CONFIG_SPL=y
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
@@ -44,7 +45,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
 CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=0
 CONFIG_SPL_POWER_DOMAIN=y
@@ -103,4 +103,3 @@ CONFIG_SPL_DM_REGULATOR_GPIO=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/chromebit_mickey_defconfig b/configs/chromebit_mickey_defconfig
index 93bf4f5c592..cd8dbfc6a42 100644
--- a/configs/chromebit_mickey_defconfig
+++ b/configs/chromebit_mickey_defconfig
@@ -19,14 +19,15 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_SPL_PAYLOAD="u-boot.img"
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-mickey.dtb"
 CONFIG_SILENT_CONSOLE=y
@@ -38,7 +39,6 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
 CONFIG_CMD_GPIO=y
@@ -80,7 +80,6 @@ CONFIG_MMC_PWRSEQ=y
 # CONFIG_SPL_DM_MMC is not set
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PINCTRL=y
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index b2ecfa6050c..4dc9cb83bed 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -23,11 +23,12 @@ CONFIG_SPL_BSS_START_ADDR=0xff8e0000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xff1a0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_SPL_FIT_SIGNATURE is not set
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
@@ -76,7 +77,6 @@ CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_ETH_DESIGNWARE=y
diff --git a/configs/chromebook_coral_defconfig b/configs/chromebook_coral_defconfig
index b3ebc04e4af..00b655ef659 100644
--- a/configs/chromebook_coral_defconfig
+++ b/configs/chromebook_coral_defconfig
@@ -23,6 +23,7 @@ CONFIG_X86_OFFSET_SPL=0xffe80000
 CONFIG_INTEL_ACPIGEN=y
 CONFIG_INTEL_GENERIC_WIFI=y
 CONFIG_SYS_MONITOR_BASE=0x01110000
+# CONFIG_EFI_LOADER is not set
 CONFIG_BOOTSTD_FULL=y
 CONFIG_CHROMEOS=y
 CONFIG_BOOTSTAGE=y
@@ -127,4 +128,3 @@ CONFIG_CMD_DHRYSTONE=y
 CONFIG_TPM=y
 # CONFIG_GZIP is not set
 CONFIG_BLOBLIST_TABLES=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig
index a1df1f830f0..f719cff3878 100644
--- a/configs/chromebook_jerry_defconfig
+++ b/configs/chromebook_jerry_defconfig
@@ -18,14 +18,15 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_SPL_PAYLOAD="u-boot.img"
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-jerry.dtb"
 CONFIG_SILENT_CONSOLE=y
@@ -37,7 +38,6 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
 CONFIG_CMD_GPIO=y
@@ -80,7 +80,6 @@ CONFIG_MMC_PWRSEQ=y
 # CONFIG_SPL_DM_MMC is not set
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PINCTRL=y
diff --git a/configs/chromebook_kevin_defconfig b/configs/chromebook_kevin_defconfig
index 0fba5912e0e..9b9fb808b2f 100644
--- a/configs/chromebook_kevin_defconfig
+++ b/configs/chromebook_kevin_defconfig
@@ -24,11 +24,12 @@ CONFIG_SPL_BSS_START_ADDR=0xff8e0000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xff1a0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_SPL_FIT_SIGNATURE is not set
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-kevin.dtb"
@@ -77,7 +78,6 @@ CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_ETH_DESIGNWARE=y
diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig
index 637b88890d8..ef4bfc972cb 100644
--- a/configs/chromebook_link_defconfig
+++ b/configs/chromebook_link_defconfig
@@ -17,6 +17,7 @@ CONFIG_SMP=y
 CONFIG_HAVE_VGA_BIOS=y
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=630000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
@@ -83,4 +84,3 @@ CONFIG_CMD_DHRYSTONE=y
 CONFIG_TPM=y
 # CONFIG_SHA256 is not set
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/chromebook_minnie_defconfig b/configs/chromebook_minnie_defconfig
index 03520b6af40..c973fe79bd6 100644
--- a/configs/chromebook_minnie_defconfig
+++ b/configs/chromebook_minnie_defconfig
@@ -19,14 +19,15 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_SPL_PAYLOAD="u-boot.img"
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-minnie.dtb"
 CONFIG_SILENT_CONSOLE=y
@@ -38,7 +39,6 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
 CONFIG_CMD_GPIO=y
@@ -81,7 +81,6 @@ CONFIG_MMC_PWRSEQ=y
 # CONFIG_SPL_DM_MMC is not set
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PINCTRL=y
diff --git a/configs/chromebook_samus_defconfig b/configs/chromebook_samus_defconfig
index 8cdad8d2344..67ebbe336e4 100644
--- a/configs/chromebook_samus_defconfig
+++ b/configs/chromebook_samus_defconfig
@@ -16,6 +16,7 @@ CONFIG_HAVE_MRC=y
 CONFIG_HAVE_REFCODE=y
 CONFIG_SMP=y
 CONFIG_HAVE_VGA_BIOS=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_SHOW_BOOT_PROGRESS=y
@@ -82,4 +83,3 @@ CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
 CONFIG_TPM=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/chromebook_speedy_defconfig b/configs/chromebook_speedy_defconfig
index 607fd288197..401fead1355 100644
--- a/configs/chromebook_speedy_defconfig
+++ b/configs/chromebook_speedy_defconfig
@@ -19,14 +19,15 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_SPL_PAYLOAD="u-boot.img"
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-speedy.dtb"
 CONFIG_SILENT_CONSOLE=y
@@ -38,7 +39,6 @@ CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_NO_BSS_LIMIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
 CONFIG_CMD_GPIO=y
@@ -81,7 +81,6 @@ CONFIG_MMC_PWRSEQ=y
 # CONFIG_SPL_DM_MMC is not set
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PINCTRL=y
diff --git a/configs/ci20_mmc_defconfig b/configs/ci20_mmc_defconfig
index 90574d2a157..a541d953ef9 100644
--- a/configs/ci20_mmc_defconfig
+++ b/configs/ci20_mmc_defconfig
@@ -14,12 +14,12 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_STACK=0xf4008000
 CONFIG_SPL_BSS_START_ADDR=0xf4004000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x81000000
+CONFIG_SPL=y
 CONFIG_ARCH_JZ47XX=y
 CONFIG_SYS_MIPS_TIMER_FREQ=1200000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS4,115200 rw rootwait root=/dev/mmcblk0p1"
 CONFIG_USE_BOOTCOMMAND=y
@@ -33,7 +33,6 @@ CONFIG_SPL_MAX_SIZE=0x2e00
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 # CONFIG_SPL_BANNER_PRINT is not set
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1c
 CONFIG_SPL_MMC_TINY=y
 CONFIG_HUSH_PARSER=y
diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig
index 62dbf2aa48f..f251d69253a 100644
--- a/configs/clearfog_defconfig
+++ b/configs/clearfog_defconfig
@@ -17,10 +17,11 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -61,7 +62,6 @@ CONFIG_SPL_I2C_EEPROM=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_MV=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_ANEG_TIMEOUT=8000
diff --git a/configs/clearfog_gt_8k_defconfig b/configs/clearfog_gt_8k_defconfig
index df7e04a75bb..cabd2226d78 100644
--- a/configs/clearfog_gt_8k_defconfig
+++ b/configs/clearfog_gt_8k_defconfig
@@ -11,14 +11,14 @@ CONFIG_ENV_OFFSET=0x180000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-8040-clearfog-gt-8k"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DEBUG_UART_BASE=0xf0512000
 CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/clearfog_sata_defconfig b/configs/clearfog_sata_defconfig
index 41382f995d3..8d4b54cb12e 100644
--- a/configs/clearfog_sata_defconfig
+++ b/configs/clearfog_sata_defconfig
@@ -17,10 +17,11 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -62,7 +63,6 @@ CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_MV=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_ANEG_TIMEOUT=8000
diff --git a/configs/clearfog_spi_defconfig b/configs/clearfog_spi_defconfig
index f345b12e6c7..2f58e94a62b 100644
--- a/configs/clearfog_spi_defconfig
+++ b/configs/clearfog_spi_defconfig
@@ -17,10 +17,11 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -62,7 +63,6 @@ CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_MV=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_ANEG_TIMEOUT=8000
diff --git a/configs/cm3588-nas-rk3588_defconfig b/configs/cm3588-nas-rk3588_defconfig
index d6d82757a2d..fd0a32d6d79 100644
--- a/configs/cm3588-nas-rk3588_defconfig
+++ b/configs/cm3588-nas-rk3588_defconfig
@@ -7,9 +7,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-friendlyelec-cm3588-nas"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_CM3588_NAS_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
index 81a39f70735..cfe7c2a349b 100644
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -12,9 +12,6 @@ CONFIG_ENV_OFFSET=0xC0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_MX6QDL=y
 CONFIG_TARGET_CM_FX6=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-cm-fx6"
 CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SYS_MONITOR_LEN=409600
@@ -81,9 +78,7 @@ CONFIG_DWC_AHSATA=y
 # CONFIG_DWC_AHSATA_AHCI is not set
 CONFIG_LBA48=y
 CONFIG_DM_I2C=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MXC=y
-CONFIG_SYS_MXC_I2C3_SPEED=400000
 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig
index eabeee8b8da..edc27ebc65b 100644
--- a/configs/cm_t43_defconfig
+++ b/configs/cm_t43_defconfig
@@ -36,7 +36,6 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x480
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C=y
-# CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_MTD=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_NAND_DRIVERS=y
@@ -72,6 +71,7 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_BOOTP_SEND_HOSTNAME=y
 CONFIG_SYS_RX_ETH_BUFFER=64
 CONFIG_DM_I2C=y
+# CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_HSMMC2_8BIT=y
diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index d7b1b76c21d..42569ec7768 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -14,12 +14,13 @@ CONFIG_BOOTAUX_RESERVED_MEM_BASE=0x88000000
 CONFIG_BOOTAUX_RESERVED_MEM_SIZE=0x08000000
 CONFIG_TARGET_COLIBRI_IMX8X=y
 CONFIG_IMX_SNVS_SEC_SC=y
-CONFIG_IMX_BOOTAUX=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_LOAD_ADDR=0x95c00000
+CONFIG_IMX_BOOTAUX=y
 CONFIG_SYS_MEMTEST_START=0x88000000
 CONFIG_SYS_MEMTEST_END=0x89000000
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
@@ -93,4 +94,3 @@ CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_DM_THERMAL=y
 CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index 8203b7edcf9..fc9404a7c43 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -21,9 +21,9 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=409600
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0x14200000
 CONFIG_SPL=y
 CONFIG_CMD_HDMIDETECT=y
-CONFIG_SYS_LOAD_ADDR=0x14200000
 CONFIG_SYS_MEMTEST_START=0x10000000
 CONFIG_SYS_MEMTEST_END=0x10010000
 CONFIG_FIT=y
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
index 47c2ffcc84e..cc616f49966 100644
--- a/configs/colibri_imx7_defconfig
+++ b/configs/colibri_imx7_defconfig
@@ -8,10 +8,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7d-colibri-eval-v3"
 CONFIG_TARGET_COLIBRI_IMX7=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_LOAD_ADDR=0x84200000
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_IMX_HAB=y
-CONFIG_SYS_LOAD_ADDR=0x84200000
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x8c000000
diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig
index 001f2f92229..57d5017cf36 100644
--- a/configs/colibri_imx7_emmc_defconfig
+++ b/configs/colibri_imx7_emmc_defconfig
@@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7d-colibri-emmc-eval-v3"
 CONFIG_TARGET_COLIBRI_IMX7=y
 CONFIG_TARGET_COLIBRI_IMX7_EMMC=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_LOAD_ADDR=0x84200000
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_IMX_HAB=y
-CONFIG_SYS_LOAD_ADDR=0x84200000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x8c000000
 CONFIG_FIT=y
diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig
index 8d8423ac791..67456c89e77 100644
--- a/configs/colibri_t20_defconfig
+++ b/configs/colibri_t20_defconfig
@@ -10,9 +10,9 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra20-colibri"
 CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_COLIBRI_T20=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_CBSIZE=1024
 CONFIG_SYS_PBSIZE=1055
diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig
index 394d656a126..5044febb20f 100644
--- a/configs/colibri_t30_defconfig
+++ b/configs/colibri_t30_defconfig
@@ -10,9 +10,9 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra30-colibri"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_COLIBRI_T30=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_CBSIZE=1024
 CONFIG_SYS_PBSIZE=1055
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index a5e6bcb64c0..de3cf23e18c 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -10,13 +10,14 @@ CONFIG_ENV_OFFSET=0x180000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri-eval-v3"
 CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_TARGET_COLIBRI_VF=y
 CONFIG_SYS_LOAD_ADDR=0x80008000
+CONFIG_TARGET_COLIBRI_VF=y
 CONFIG_SYS_MEMTEST_START=0x80010000
 CONFIG_SYS_MEMTEST_END=0x87c00000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=520192
+# CONFIG_EFI_LOADER is not set
 CONFIG_BOOTDELAY=1
 CONFIG_FDT_FIXUP_PARTITIONS=y
 CONFIG_USE_BOOTCOMMAND=y
@@ -104,4 +105,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
 CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig
index 6fe9750841f..cced383f917 100644
--- a/configs/controlcenterdc_defconfig
+++ b/configs/controlcenterdc_defconfig
@@ -20,14 +20,16 @@ CONFIG_SPL_STACK=0x40031000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40028000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 CONFIG_OF_BOARD_FIXUP=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
@@ -81,7 +83,6 @@ CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_MV=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_BITBANGMII=y
 CONFIG_BITBANGMII_MULTI=y
@@ -105,4 +106,3 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_TPM=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/coolpi-4b-rk3588s_defconfig b/configs/coolpi-4b-rk3588s_defconfig
index 3d45d939abb..ea985b81670 100644
--- a/configs/coolpi-4b-rk3588s_defconfig
+++ b/configs/coolpi-4b-rk3588s_defconfig
@@ -9,11 +9,12 @@ CONFIG_ROCKCHIP_RK3588=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_EVB_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=5
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -66,7 +67,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=5
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_XMC=y
 CONFIG_SPI_FLASH_XTX=y
diff --git a/configs/coolpi-cm5-evb-rk3588_defconfig b/configs/coolpi-cm5-evb-rk3588_defconfig
index 5190d69c1c5..58ffe7baf5f 100644
--- a/configs/coolpi-cm5-evb-rk3588_defconfig
+++ b/configs/coolpi-cm5-evb-rk3588_defconfig
@@ -9,11 +9,12 @@ CONFIG_ROCKCHIP_RK3588=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_EVB_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=5
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -66,7 +67,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=5
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_XMC=y
 CONFIG_SPI_FLASH_XTX=y
diff --git a/configs/corstone1000_defconfig b/configs/corstone1000_defconfig
index 26e157dc2cb..80163580f85 100644
--- a/configs/corstone1000_defconfig
+++ b/configs/corstone1000_defconfig
@@ -7,10 +7,15 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x83f00000
 CONFIG_DEFAULT_DEVICE_TREE="corstone1000-mps3"
-CONFIG_IDENT_STRING=" corstone1000 aarch64 "
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_LOAD_ADDR=0x82100000
+CONFIG_IDENT_STRING=" corstone1000 aarch64 "
+CONFIG_EFI_MM_COMM_TEE=y
+CONFIG_FFA_SHARED_MM_BUF_SIZE=4096
+CONFIG_FFA_SHARED_MM_BUF_OFFSET=0
+CONFIG_FFA_SHARED_MM_BUF_ADDR=0x02000000
+CONFIG_EFI_CAPSULE_ON_DISK=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -61,10 +66,5 @@ CONFIG_USB=y
 CONFIG_USB_ISP1760=y
 # CONFIG_RANDOM_UUID is not set
 CONFIG_ERRNO_STR=y
-CONFIG_EFI_MM_COMM_TEE=y
-CONFIG_FFA_SHARED_MM_BUF_SIZE=4096
-CONFIG_FFA_SHARED_MM_BUF_OFFSET=0
-CONFIG_FFA_SHARED_MM_BUF_ADDR=0x02000000
-CONFIG_EFI_CAPSULE_ON_DISK=y
 CONFIG_FWU_MULTI_BANK_UPDATE=y
 CONFIG_FWU_MDATA_V1=y
diff --git a/configs/cortina_presidio-asic-base_defconfig b/configs/cortina_presidio-asic-base_defconfig
index eb5743da64d..0cb33996fe7 100644
--- a/configs/cortina_presidio-asic-base_defconfig
+++ b/configs/cortina_presidio-asic-base_defconfig
@@ -11,10 +11,11 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
-CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SYS_BOOTM_LEN=0xc00000
 CONFIG_SYS_LOAD_ADDR=0x10000000
+CONFIG_IDENT_STRING="Presidio-SoC"
 CONFIG_REMAKE_ELF=y
-CONFIG_SYS_BOOTM_LEN=0xc00000
+# CONFIG_EFI_LOADER is not set
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_SHOW_BOOT_PROGRESS=y
 CONFIG_BOOTDELAY=3
@@ -38,4 +39,3 @@ CONFIG_DM_SERIAL=y
 CONFIG_CORTINA_UART=y
 CONFIG_WDT=y
 CONFIG_WDT_CORTINA=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/cortina_presidio-asic-emmc_defconfig b/configs/cortina_presidio-asic-emmc_defconfig
index 5b62cc1a560..2f7a26e4b6d 100644
--- a/configs/cortina_presidio-asic-emmc_defconfig
+++ b/configs/cortina_presidio-asic-emmc_defconfig
@@ -11,10 +11,10 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
-CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SYS_BOOTM_LEN=0xc00000
 CONFIG_SYS_LOAD_ADDR=0x10000000
+CONFIG_IDENT_STRING="Presidio-SoC"
 CONFIG_REMAKE_ELF=y
-CONFIG_SYS_BOOTM_LEN=0xc00000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_SHOW_BOOT_PROGRESS=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/cortina_presidio-asic-pnand_defconfig b/configs/cortina_presidio-asic-pnand_defconfig
index c7367d4d91c..093874d3023 100644
--- a/configs/cortina_presidio-asic-pnand_defconfig
+++ b/configs/cortina_presidio-asic-pnand_defconfig
@@ -11,10 +11,11 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
-CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SYS_BOOTM_LEN=0xc00000
 CONFIG_SYS_LOAD_ADDR=0x10000000
+CONFIG_IDENT_STRING="Presidio-SoC"
 CONFIG_REMAKE_ELF=y
-CONFIG_SYS_BOOTM_LEN=0xc00000
+# CONFIG_EFI_LOADER is not set
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_SHOW_BOOT_PROGRESS=y
 CONFIG_BOOTDELAY=3
@@ -43,4 +44,3 @@ CONFIG_DM_SERIAL=y
 CONFIG_CORTINA_UART=y
 CONFIG_WDT=y
 CONFIG_WDT_CORTINA=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 65e24b72bec..b1e3ee0d08b 100644
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -24,9 +24,9 @@ CONFIG_SPL_STACK=0x4000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3000
 CONFIG_SPL_BSS_MAX_SIZE=0x800
+CONFIG_SYS_LOAD_ADDR=0x70000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x180000
-CONFIG_SYS_LOAD_ADDR=0x70000000
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/crs305-1g-4s-bit_defconfig b/configs/crs305-1g-4s-bit_defconfig
index c3d4594b75f..0b8b13b783f 100644
--- a/configs/crs305-1g-4s-bit_defconfig
+++ b/configs/crs305-1g-4s-bit_defconfig
@@ -11,12 +11,13 @@ CONFIG_ENV_OFFSET=0x1F0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs305-1g-4s-bit"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
 CONFIG_AUTOBOOT_STOP_STR="s"
@@ -47,4 +48,3 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_PCI_MVEBU=y
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/crs305-1g-4s_defconfig b/configs/crs305-1g-4s_defconfig
index 1919e8c7794..d29fae4c7ee 100644
--- a/configs/crs305-1g-4s_defconfig
+++ b/configs/crs305-1g-4s_defconfig
@@ -11,12 +11,13 @@ CONFIG_ENV_OFFSET=0x1F0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs305-1g-4s"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
 CONFIG_AUTOBOOT_STOP_STR="s"
@@ -48,4 +49,3 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_PCI_MVEBU=y
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/crs326-24g-2s-bit_defconfig b/configs/crs326-24g-2s-bit_defconfig
index a584c26eb90..4029fad9365 100644
--- a/configs/crs326-24g-2s-bit_defconfig
+++ b/configs/crs326-24g-2s-bit_defconfig
@@ -11,12 +11,13 @@ CONFIG_ENV_OFFSET=0x1F0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s-bit"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
 CONFIG_AUTOBOOT_STOP_STR="s"
@@ -47,4 +48,3 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_PCI_MVEBU=y
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/crs326-24g-2s_defconfig b/configs/crs326-24g-2s_defconfig
index 43f7455afbf..ef8f380171e 100644
--- a/configs/crs326-24g-2s_defconfig
+++ b/configs/crs326-24g-2s_defconfig
@@ -11,12 +11,13 @@ CONFIG_ENV_OFFSET=0x1F0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
 CONFIG_AUTOBOOT_STOP_STR="s"
@@ -47,4 +48,3 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_PCI_MVEBU=y
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/crs328-4c-20s-4s-bit_defconfig b/configs/crs328-4c-20s-4s-bit_defconfig
index 7bf671643a9..1c984699a57 100644
--- a/configs/crs328-4c-20s-4s-bit_defconfig
+++ b/configs/crs328-4c-20s-4s-bit_defconfig
@@ -11,12 +11,13 @@ CONFIG_ENV_OFFSET=0x1F0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs328-4c-20s-4s-bit"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
 CONFIG_AUTOBOOT_STOP_STR="s"
@@ -47,4 +48,3 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_PCI_MVEBU=y
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/crs328-4c-20s-4s_defconfig b/configs/crs328-4c-20s-4s_defconfig
index 2f50bdaf1e7..b391dcd0eaa 100644
--- a/configs/crs328-4c-20s-4s_defconfig
+++ b/configs/crs328-4c-20s-4s_defconfig
@@ -11,12 +11,13 @@ CONFIG_ENV_OFFSET=0x1F0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs328-4c-20s-4s"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
 CONFIG_AUTOBOOT_STOP_STR="s"
@@ -47,4 +48,3 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_PCI_MVEBU=y
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/cubieboard7_defconfig b/configs/cubieboard7_defconfig
index b5c4017013e..fee8fe61933 100644
--- a/configs/cubieboard7_defconfig
+++ b/configs/cubieboard7_defconfig
@@ -6,9 +6,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1107ff00
 CONFIG_DEFAULT_DEVICE_TREE="s700-cubieboard7"
 CONFIG_MACH_S700=y
-CONFIG_IDENT_STRING="\ncubieboard7"
-CONFIG_SYS_LOAD_ADDR=0x7ffc0
 CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x7ffc0
+CONFIG_IDENT_STRING="\ncubieboard7"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig
index 69658a2ba7f..1fe21beeee9 100644
--- a/configs/d2net_v2_defconfig
+++ b/configs/d2net_v2_defconfig
@@ -12,8 +12,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-d2net"
-CONFIG_IDENT_STRING=" D2 v2"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" D2 v2"
 CONFIG_ENV_ADDR=0x70000
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
index d10faa5b275..dbc9bf47102 100644
--- a/configs/da850evm_defconfig
+++ b/configs/da850evm_defconfig
@@ -24,10 +24,10 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x8001ff00
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0xc0000000
+CONFIG_SYS_LOAD_ADDR=0xc0700000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc0700000
 CONFIG_LTO=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig
index 7e59b6ff876..0513648b9aa 100644
--- a/configs/da850evm_nand_defconfig
+++ b/configs/da850evm_nand_defconfig
@@ -21,10 +21,10 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x8001ff00
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0xc0000000
+CONFIG_SYS_LOAD_ADDR=0xc0700000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc0700000
 CONFIG_LTO=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig
index d9705b0fc71..865aca76dd1 100644
--- a/configs/dalmore_defconfig
+++ b/configs/dalmore_defconfig
@@ -10,10 +10,10 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra114-dalmore"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA114=y
 CONFIG_TARGET_DALMORE=y
 CONFIG_TEGRA_ENABLE_UARTD=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2086
 CONFIG_CONSOLE_MUX=y
diff --git a/configs/db-88f6720_defconfig b/configs/db-88f6720_defconfig
index 22a1e834247..31645f07d04 100644
--- a/configs/db-88f6720_defconfig
+++ b/configs/db-88f6720_defconfig
@@ -18,10 +18,10 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40020000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DEBUG_UART=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_BOOTDELAY=3
diff --git a/configs/db-88f6820-amc_defconfig b/configs/db-88f6820-amc_defconfig
index a6c862234a0..3b91ebc9916 100644
--- a/configs/db-88f6820-amc_defconfig
+++ b/configs/db-88f6820-amc_defconfig
@@ -18,10 +18,11 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
@@ -67,7 +68,6 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_PXA3XX=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/db-88f6820-amc_nand_defconfig b/configs/db-88f6820-amc_nand_defconfig
index 54457820568..60caed45ece 100644
--- a/configs/db-88f6820-amc_nand_defconfig
+++ b/configs/db-88f6820-amc_nand_defconfig
@@ -20,10 +20,11 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
@@ -71,7 +72,6 @@ CONFIG_NAND_PXA3XX=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_PAGE_SIZE=0x1000
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/db-88f6820-gp_defconfig b/configs/db-88f6820-gp_defconfig
index ee8cb8ae66c..b327149ad72 100644
--- a/configs/db-88f6820-gp_defconfig
+++ b/configs/db-88f6820-gp_defconfig
@@ -18,10 +18,10 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig
index f10a6fbccab..7e1495bc32d 100644
--- a/configs/db-mv784mp-gp_defconfig
+++ b/configs/db-mv784mp-gp_defconfig
@@ -18,10 +18,10 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40020000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
diff --git a/configs/deneb_defconfig b/configs/deneb_defconfig
index 4731e84e388..b220dc8590b 100644
--- a/configs/deneb_defconfig
+++ b/configs/deneb_defconfig
@@ -22,14 +22,15 @@ CONFIG_SPL_STACK=0x13e000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x128000
 CONFIG_SPL_BSS_MAX_SIZE=0x1000
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x80280000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x2000
 CONFIG_IDENT_STRING=" ##v01.06"
-CONFIG_SYS_LOAD_ADDR=0x80280000
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
@@ -56,7 +57,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_WATCHDOG=y
@@ -131,4 +131,3 @@ CONFIG_DM_THERMAL=y
 CONFIG_IMX_SCU_THERMAL=y
 # CONFIG_SPL_WDT is not set
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/display5_defconfig b/configs/display5_defconfig
index 7463f4f52b5..c91cb64d288 100644
--- a/configs/display5_defconfig
+++ b/configs/display5_defconfig
@@ -26,6 +26,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_WATCHDOG_TIMEOUT_MSECS=15000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_OFFSET_REDUND=0x130000
@@ -42,7 +43,6 @@ CONFIG_SYS_PBSIZE=2076
 CONFIG_MISC_INIT_R=y
 CONFIG_SPL_BOOTCOUNT_LIMIT=y
 CONFIG_SPL_SYS_MALLOC=y
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SAVEENV=y
@@ -108,7 +108,6 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig
index 59d0c5d0370..c5a4f820714 100644
--- a/configs/display5_factory_defconfig
+++ b/configs/display5_factory_defconfig
@@ -24,6 +24,7 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_WATCHDOG_TIMEOUT_MSECS=15000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x130000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -39,7 +40,6 @@ CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2084
 CONFIG_MISC_INIT_R=y
 CONFIG_SPL_SYS_MALLOC=y
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_OS_BOOT=y
@@ -107,7 +107,6 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig
index b85f7cac8ef..9cbe788b560 100644
--- a/configs/dns325_defconfig
+++ b/configs/dns325_defconfig
@@ -11,8 +11,8 @@ CONFIG_TARGET_DNS325=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xE0000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-dns325"
-CONFIG_IDENT_STRING="\nD-Link DNS-325"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nD-Link DNS-325"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig
index 7b5f19433a9..e2bb60fab37 100644
--- a/configs/dockstar_defconfig
+++ b/configs/dockstar_defconfig
@@ -14,8 +14,8 @@ CONFIG_TARGET_DOCKSTAR=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-dockstar"
-CONFIG_IDENT_STRING="\nSeagate FreeAgent DockStar"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nSeagate FreeAgent DockStar"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:root; ubifsload 0x800000 ${kernel}; ubifsload 0x1100000 ${initrd}; bootm 0x800000 0x1100000"
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 6264d9fa7ad..70613397403 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -41,7 +41,6 @@ CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
 CONFIG_CMD_SPL=y
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 4e7929718fd..f6f00454aaa 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -38,7 +38,6 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig
index 68d342b277c..fca69a47c59 100644
--- a/configs/dra7xx_hs_evm_usb_defconfig
+++ b/configs/dra7xx_hs_evm_usb_defconfig
@@ -37,7 +37,6 @@ CONFIG_SPL_DMA=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
 CONFIG_SPL_YMODEM_SUPPORT=y
diff --git a/configs/draco-etamin_defconfig b/configs/draco-etamin_defconfig
index 78ee5c1eb66..8c902e440ef 100644
--- a/configs/draco-etamin_defconfig
+++ b/configs/draco-etamin_defconfig
@@ -15,11 +15,11 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SPL_BSS_START_ADDR=0x80000000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0xB80000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/draco-rastaban_defconfig b/configs/draco-rastaban_defconfig
index ea6518e142e..3953a1a459e 100644
--- a/configs/draco-rastaban_defconfig
+++ b/configs/draco-rastaban_defconfig
@@ -13,11 +13,11 @@ CONFIG_TARGET_RASTABAN=y
 CONFIG_SPL_SERIAL=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SPL_BSS_START_ADDR=0x80000000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x2E0000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
@@ -33,7 +33,6 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
diff --git a/configs/draco-thuban_defconfig b/configs/draco-thuban_defconfig
index 4672d4b2873..2851336f839 100644
--- a/configs/draco-thuban_defconfig
+++ b/configs/draco-thuban_defconfig
@@ -13,11 +13,11 @@ CONFIG_TARGET_THUBAN=y
 CONFIG_SPL_SERIAL=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SPL_BSS_START_ADDR=0x80000000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x2E0000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
@@ -33,7 +33,6 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig
index 9ef04fd4554..967817f4f58 100644
--- a/configs/dragonboard410c_defconfig
+++ b/configs/dragonboard410c_defconfig
@@ -11,8 +11,8 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x0
 CONFIG_DEFAULT_DEVICE_TREE="qcom/apq8016-sbc"
 CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C"
 CONFIG_SYS_LOAD_ADDR=0x80080000
+CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C"
 CONFIG_REMAKE_ELF=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/dragonboard820c_defconfig b/configs/dragonboard820c_defconfig
index f6b2cb09ba3..e29bea7deb2 100644
--- a/configs/dragonboard820c_defconfig
+++ b/configs/dragonboard820c_defconfig
@@ -8,8 +8,8 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0
 CONFIG_ENV_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="qcom/apq8096-db820c"
-CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 820C"
 CONFIG_SYS_LOAD_ADDR=0x80080000
+CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 820C"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyMSM0,115200n8"
diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig
index 8518eabcb2b..7ef8ed09107 100644
--- a/configs/dreamplug_defconfig
+++ b/configs/dreamplug_defconfig
@@ -14,8 +14,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-dreamplug"
-CONFIG_IDENT_STRING="\nMarvell-DreamPlug"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nMarvell-DreamPlug"
 CONFIG_ENV_ADDR=0x100000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/ds116_defconfig b/configs/ds116_defconfig
index 1173e3a0f6a..0bb7e301a64 100644
--- a/configs/ds116_defconfig
+++ b/configs/ds116_defconfig
@@ -23,11 +23,11 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
 CONFIG_IDENT_STRING="\nSynology DS116"
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig
index 6391c43474e..4676c555f4e 100644
--- a/configs/ds414_defconfig
+++ b/configs/ds414_defconfig
@@ -23,11 +23,11 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40020000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
 CONFIG_IDENT_STRING="\nSynology DS214+/DS414 2/4-Bay Diskstation"
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTSTD_FULL=y
diff --git a/configs/durian_defconfig b/configs/durian_defconfig
index f1d45ca3064..7765fe3a6a2 100644
--- a/configs/durian_defconfig
+++ b/configs/durian_defconfig
@@ -9,12 +9,12 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x87f00000
 CONFIG_ENV_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="phytium-durian"
-# CONFIG_PSCI_RESET is not set
+CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_SYS_LOAD_ADDR=0x90000000
+# CONFIG_PSCI_RESET is not set
 CONFIG_SYS_PCI_64BIT=y
 CONFIG_PCI=y
 CONFIG_AHCI=y
-CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 earlycon=pl011,0x28001000 root=/dev/sda2 rw"
diff --git a/configs/eDPU_defconfig b/configs/eDPU_defconfig
index da18787b0a2..43041039b46 100644
--- a/configs/eDPU_defconfig
+++ b/configs/eDPU_defconfig
@@ -10,8 +10,8 @@ CONFIG_ENV_OFFSET=0x180000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-3720-eDPU"
-CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_SYS_LOAD_ADDR=0x6000000
+CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_DEBUG_UART=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
diff --git a/configs/eaidk-610-rk3399_defconfig b/configs/eaidk-610-rk3399_defconfig
index aedb4570ef8..8f9a76157f1 100644
--- a/configs/eaidk-610-rk3399_defconfig
+++ b/configs/eaidk-610-rk3399_defconfig
@@ -8,9 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-eaidk-610"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-eaidk-610.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/edison_defconfig b/configs/edison_defconfig
index c549cd0874b..c48c6d11898 100644
--- a/configs/edison_defconfig
+++ b/configs/edison_defconfig
@@ -6,8 +6,8 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DEFAULT_DEVICE_TREE="edison"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_ENV_OFFSET_REDUND=0x600000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_ENV_OFFSET_REDUND=0x600000
 CONFIG_VENDOR_INTEL=y
 CONFIG_TARGET_EDISON=y
 CONFIG_SMP=y
@@ -52,4 +52,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_WDT=y
 CONFIG_WDT_TANGIER=y
 CONFIG_GENERATE_ACPI_TABLE=y
-CONFIG_SHA1=y
diff --git a/configs/efi-x86_app32_defconfig b/configs/efi-x86_app32_defconfig
index 53ec63461d5..0025e56b5d7 100644
--- a/configs/efi-x86_app32_defconfig
+++ b/configs/efi-x86_app32_defconfig
@@ -7,6 +7,7 @@ CONFIG_DEBUG_UART_CLOCK=0
 CONFIG_VENDOR_EFI=y
 CONFIG_TARGET_EFI_APP32=y
 CONFIG_DEBUG_UART=y
+CONFIG_EFI=y
 CONFIG_FIT=y
 # CONFIG_BOOTSTD is not set
 CONFIG_SHOW_BOOT_PROGRESS=y
@@ -39,4 +40,3 @@ CONFIG_BOOTFILE="bzImage"
 CONFIG_REGMAP=y
 CONFIG_SYSCON=y
 # CONFIG_GZIP is not set
-CONFIG_EFI=y
diff --git a/configs/efi-x86_app64_defconfig b/configs/efi-x86_app64_defconfig
index 3d021483dd0..1cc50b689c9 100644
--- a/configs/efi-x86_app64_defconfig
+++ b/configs/efi-x86_app64_defconfig
@@ -8,6 +8,8 @@ CONFIG_X86_RUN_64BIT=y
 CONFIG_VENDOR_EFI=y
 CONFIG_TARGET_EFI_APP64=y
 CONFIG_DEBUG_UART=y
+CONFIG_EFI=y
+CONFIG_EFI_APP_64BIT=y
 CONFIG_FIT=y
 # CONFIG_BOOTSTD is not set
 CONFIG_SHOW_BOOT_PROGRESS=y
@@ -44,5 +46,3 @@ CONFIG_SYSCON=y
 CONFIG_CONSOLE_SCROLL_LINES=5
 CONFIG_CMD_DHRYSTONE=y
 # CONFIG_GZIP is not set
-CONFIG_EFI=y
-CONFIG_EFI_APP_64BIT=y
diff --git a/configs/efi-x86_payload32_defconfig b/configs/efi-x86_payload32_defconfig
index a8aa1a661db..071ddb8e36d 100644
--- a/configs/efi-x86_payload32_defconfig
+++ b/configs/efi-x86_payload32_defconfig
@@ -5,6 +5,8 @@ CONFIG_DEFAULT_DEVICE_TREE="efi-x86_payload"
 CONFIG_PRE_CON_BUF_ADDR=0x100000
 CONFIG_VENDOR_EFI=y
 CONFIG_TARGET_EFI_PAYLOAD=y
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SHOW_BOOT_PROGRESS=y
@@ -52,5 +54,3 @@ CONFIG_SYS_64BIT_LBA=y
 # CONFIG_PCI_PNP is not set
 CONFIG_SYS_NS16550_PORT_MAPPED=y
 # CONFIG_GZIP is not set
-CONFIG_EFI=y
-CONFIG_EFI_STUB=y
diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig
index 13e0f13c6c7..71612d7fb19 100644
--- a/configs/efi-x86_payload64_defconfig
+++ b/configs/efi-x86_payload64_defconfig
@@ -5,6 +5,9 @@ CONFIG_DEFAULT_DEVICE_TREE="efi-x86_payload"
 CONFIG_PRE_CON_BUF_ADDR=0x100000
 CONFIG_VENDOR_EFI=y
 CONFIG_TARGET_EFI_PAYLOAD=y
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+CONFIG_EFI_STUB_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_BOOTSTD_FULL=y
@@ -46,6 +49,3 @@ CONFIG_SYS_64BIT_LBA=y
 # CONFIG_PCI_PNP is not set
 CONFIG_SYS_NS16550_PORT_MAPPED=y
 # CONFIG_GZIP is not set
-CONFIG_EFI=y
-CONFIG_EFI_STUB=y
-CONFIG_EFI_STUB_64BIT=y
diff --git a/configs/elgin-rv1108_defconfig b/configs/elgin-rv1108_defconfig
index 454ed9e0a62..601165be85a 100644
--- a/configs/elgin-rv1108_defconfig
+++ b/configs/elgin-rv1108_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rv1108-elgin-r1"
 CONFIG_ROCKCHIP_RV1108=y
 CONFIG_ROCKCHIP_BOOT_MODE_REG=0
 CONFIG_TARGET_ELGIN_RV1108=y
+CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_DEBUG_UART_BASE=0x10210000
 CONFIG_DEBUG_UART_CLOCK=24000000
 # CONFIG_DEBUG_UART_BOARD_INIT is not set
-CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_DEBUG_UART=y
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_DEFAULT_FDT_FILE="rv1108-elgin-r1.dtb"
diff --git a/configs/emsdp_defconfig b/configs/emsdp_defconfig
index 07bed2b5623..efa5eecad0d 100644
--- a/configs/emsdp_defconfig
+++ b/configs/emsdp_defconfig
@@ -9,8 +9,8 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10100000
 CONFIG_ENV_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="emsdp"
-CONFIG_SYS_CLK_FREQ=40000000
 CONFIG_SYS_LOAD_ADDR=0x10000000
+CONFIG_SYS_CLK_FREQ=40000000
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=280
diff --git a/configs/endeavoru_defconfig b/configs/endeavoru_defconfig
index 3230d360eda..fddc3d87ed3 100644
--- a/configs/endeavoru_defconfig
+++ b/configs/endeavoru_defconfig
@@ -10,10 +10,10 @@ CONFIG_ENV_OFFSET=0xFFFFD000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-htc-endeavoru"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_ENDEAVORU=y
 CONFIG_CMD_EBTUPDATE=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/espresso7420_defconfig b/configs/espresso7420_defconfig
index f176660bde5..a88b18348d7 100644
--- a/configs/espresso7420_defconfig
+++ b/configs/espresso7420_defconfig
@@ -9,9 +9,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2158000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="exynos7420-espresso7420"
-CONFIG_IDENT_STRING=" for ESPRESSO7420"
-CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x43e00000
+CONFIG_IDENT_STRING=" for ESPRESSO7420"
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_PBSIZE=1024
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/evb-ast2500_defconfig b/configs/evb-ast2500_defconfig
index 6685f37e3f5..78b0a5c2bde 100644
--- a/configs/evb-ast2500_defconfig
+++ b/configs/evb-ast2500_defconfig
@@ -11,8 +11,8 @@ CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ast2500-evb"
 CONFIG_DM_RESET=y
-CONFIG_PRE_CON_BUF_ADDR=0x1e720000
 CONFIG_SYS_LOAD_ADDR=0x83000000
+CONFIG_PRE_CON_BUF_ADDR=0x1e720000
 CONFIG_FIT=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig
index e6a4e4d1b7c..7cf97ee0be2 100644
--- a/configs/evb-ast2600_defconfig
+++ b/configs/evb-ast2600_defconfig
@@ -25,13 +25,14 @@ CONFIG_SPL_BSS_START_ADDR=0x83000000
 CONFIG_SPL_BSS_MAX_SIZE=0x1000000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x83000000
 CONFIG_SPL_SIZE_LIMIT=0x10000
 CONFIG_SPL=y
 # CONFIG_ARMV7_NONSEC is not set
-CONFIG_SYS_LOAD_ADDR=0x83000000
 CONFIG_SPL_PAYLOAD="u-boot.img"
 CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
@@ -49,7 +50,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_DM_RESET=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
@@ -123,5 +123,4 @@ CONFIG_WDT=y
 CONFIG_SHA384=y
 CONFIG_SPL_CRC32=y
 CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
 CONFIG_PHANDLE_CHECK_SEQ=y
diff --git a/configs/evb-px30_defconfig b/configs/evb-px30_defconfig
index 972f4188373..50dd29fcb01 100644
--- a/configs/evb-px30_defconfig
+++ b/configs/evb-px30_defconfig
@@ -10,10 +10,11 @@ CONFIG_ROCKCHIP_PX30=y
 CONFIG_TARGET_EVB_PX30=y
 # CONFIG_TPL_LIBCOMMON_SUPPORT is not set
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xff178000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -102,4 +103,3 @@ CONFIG_SPL_TINY_MEMSET=y
 CONFIG_TPL_TINY_MEMSET=y
 CONFIG_LZO=y
 CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/evb-px5_defconfig b/configs/evb-px5_defconfig
index ccd38831533..48f5b90a7dc 100644
--- a/configs/evb-px5_defconfig
+++ b/configs/evb-px5_defconfig
@@ -21,12 +21,12 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x400000
 CONFIG_SPL_BSS_MAX_SIZE=0x20000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xFF1c0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_FIT=y
diff --git a/configs/evb-rk3036_defconfig b/configs/evb-rk3036_defconfig
index 94ee21e344e..69c6d7e7228 100644
--- a/configs/evb-rk3036_defconfig
+++ b/configs/evb-rk3036_defconfig
@@ -17,9 +17,9 @@ CONFIG_ROCKCHIP_RK3036=y
 CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0x10081fff
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_LOAD_ADDR=0x60800800
 CONFIG_DEBUG_UART_BASE=0x20068000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x60800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_USE_PREBOOT=y
diff --git a/configs/evb-rk3128_defconfig b/configs/evb-rk3128_defconfig
index ffff062af32..b46da229d54 100644
--- a/configs/evb-rk3128_defconfig
+++ b/configs/evb-rk3128_defconfig
@@ -11,13 +11,13 @@ CONFIG_ENV_OFFSET=0x0
 CONFIG_DEFAULT_DEVICE_TREE="rk3128-evb"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3128=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x60800800
 CONFIG_DEBUG_UART_BASE=0x20068000
 CONFIG_DEBUG_UART_CLOCK=24000000
 # CONFIG_DEBUG_UART_BOARD_INIT is not set
-CONFIG_SYS_LOAD_ADDR=0x60800800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DEFAULT_FDT_FILE="rk3128-evb.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig
index 69dd880b38f..7118a4f1def 100644
--- a/configs/evb-rk3229_defconfig
+++ b/configs/evb-rk3229_defconfig
@@ -15,14 +15,14 @@ CONFIG_ROCKCHIP_RK322X=y
 CONFIG_TARGET_EVB_RK3229=y
 CONFIG_SPL_STACK_R_ADDR=0x60600000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x61800800
 CONFIG_DEBUG_UART_BASE=0x11030000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x61800800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3229-evb.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288_defconfig
index 6407f22470e..ae79efebf57 100644
--- a/configs/evb-rk3288_defconfig
+++ b/configs/evb-rk3288_defconfig
@@ -18,16 +18,16 @@ CONFIG_SPL_STACK_R_ADDR=0x04000000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_SPL_SIZE_LIMIT=0x4b000
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig
index 6d090dba308..c8e1753b281 100644
--- a/configs/evb-rk3308_defconfig
+++ b/configs/evb-rk3308_defconfig
@@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3308-evb"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3308=y
 CONFIG_TARGET_EVB_RK3308=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFF0E0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 # CONFIG_DEBUG_UART_BOARD_INIT is not set
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_FIT=y
diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
index bfb85223437..0f3d260360b 100644
--- a/configs/evb-rk3328_defconfig
+++ b/configs/evb-rk3328_defconfig
@@ -8,9 +8,9 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3328-evb"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index 756d6952de1..9481dfae7e4 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-evb"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig
index 2076f55122b..a068bc6846c 100644
--- a/configs/evb-rk3568_defconfig
+++ b/configs/evb-rk3568_defconfig
@@ -5,9 +5,9 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-evb1-v10"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/evb-rk3588_defconfig b/configs/evb-rk3588_defconfig
index 1d5585677a4..3d4d2747145 100644
--- a/configs/evb-rk3588_defconfig
+++ b/configs/evb-rk3588_defconfig
@@ -6,9 +6,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-evb1-v10"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_EVB_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/evb-rv1108_defconfig b/configs/evb-rv1108_defconfig
index 6204cb4b963..46b94953101 100644
--- a/configs/evb-rv1108_defconfig
+++ b/configs/evb-rv1108_defconfig
@@ -7,10 +7,10 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60100000
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rv1108-evb"
 CONFIG_ROCKCHIP_RV1108=y
+CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_DEBUG_UART_BASE=0x10210000
 CONFIG_DEBUG_UART_CLOCK=24000000
 # CONFIG_DEBUG_UART_BOARD_INIT is not set
-CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTCOMMAND="sf probe;sf read 0x62000000 0x140800 0x500000;dcache off;go 0x62000000"
 CONFIG_DEFAULT_FDT_FILE="rv1108-evb.dtb"
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index dce8093376d..b32ca726b6c 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -8,9 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-ficus"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_ROCK960_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/firefly-px30_defconfig b/configs/firefly-px30_defconfig
index a1ce9222c32..7398d06274f 100644
--- a/configs/firefly-px30_defconfig
+++ b/configs/firefly-px30_defconfig
@@ -11,10 +11,11 @@ CONFIG_TARGET_EVB_PX30=y
 CONFIG_DEBUG_UART_CHANNEL=1
 # CONFIG_TPL_LIBCOMMON_SUPPORT is not set
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF160000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -102,4 +103,3 @@ CONFIG_SPL_TINY_MEMSET=y
 CONFIG_TPL_TINY_MEMSET=y
 CONFIG_LZO=y
 CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig
index 03ee04e5bf2..00f23174210 100644
--- a/configs/firefly-rk3288_defconfig
+++ b/configs/firefly-rk3288_defconfig
@@ -18,13 +18,13 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_SPL_SIZE_LIMIT=0x40000
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-firefly.dtb"
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index edacef29edf..3871627318b 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-firefly"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig
index 42f116fac13..243a4c311e9 100644
--- a/configs/gardena-smart-gateway-at91sam_defconfig
+++ b/configs/gardena-smart-gateway-at91sam_defconfig
@@ -23,11 +23,11 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_NAND_BOOT=y
@@ -46,7 +46,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y
diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig
index f4642e3fcff..b7f4a76ce68 100644
--- a/configs/gardena-smart-gateway-mt7688_defconfig
+++ b/configs/gardena-smart-gateway-mt7688_defconfig
@@ -13,10 +13,10 @@ CONFIG_SYS_BOOTCOUNT_ADDR=0xb000006c
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x80000
 CONFIG_SPL_BSS_START_ADDR=0x80010000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
+CONFIG_SYS_LOAD_ADDR=0x80100000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_OFFSET_REDUND=0xB0000
-CONFIG_SYS_LOAD_ADDR=0x80100000
 CONFIG_ARCH_MTMIPS=y
 CONFIG_SOC_MT7628=y
 CONFIG_SYS_MIPS_TIMER_FREQ=290000000
diff --git a/configs/gazerbeam_defconfig b/configs/gazerbeam_defconfig
index 9765c435d3c..1fe7d2fc40b 100644
--- a/configs/gazerbeam_defconfig
+++ b/configs/gazerbeam_defconfig
@@ -8,6 +8,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="gazerbeam"
 CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_IDENT_STRING=" gazerbeam 0.01"
 CONFIG_SYS_CLK_FREQ=33333333
 CONFIG_ENV_ADDR=0xFE080000
@@ -94,7 +95,6 @@ CONFIG_SYS_BARGSIZE=1024
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_BOOTDELAY=5
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_STOP_STR=" "
diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index ce5dfb49279..9cd88af9da6 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -14,6 +14,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=10
 CONFIG_WATCHDOG_TIMEOUT_MSECS=8000
 CONFIG_PCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=1
@@ -100,4 +101,3 @@ CONFIG_IMX_VIDEO_SKIP=y
 CONFIG_IMX_HDMI=y
 CONFIG_IMX_WATCHDOG=y
 CONFIG_BCH=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/geekbox_defconfig b/configs/geekbox_defconfig
index 8f4be79831a..80f91de7a11 100644
--- a/configs/geekbox_defconfig
+++ b/configs/geekbox_defconfig
@@ -10,9 +10,9 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_DEFAULT_DEVICE_TREE="rk3368-geekbox"
 CONFIG_ROCKCHIP_RK3368=y
 CONFIG_TARGET_GEEKBOX=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-geekbox.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
diff --git a/configs/generic-rk3568_defconfig b/configs/generic-rk3568_defconfig
index 66a33afbbaf..9b9eab6bad1 100644
--- a/configs/generic-rk3568_defconfig
+++ b/configs/generic-rk3568_defconfig
@@ -7,11 +7,12 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3568-generic"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=4
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -56,7 +57,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=4
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_MACRONIX=y
diff --git a/configs/generic-rk3588_defconfig b/configs/generic-rk3588_defconfig
index 42bc2c9a765..f22277f935d 100644
--- a/configs/generic-rk3588_defconfig
+++ b/configs/generic-rk3588_defconfig
@@ -6,9 +6,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3588-generic"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_EVB_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig
index 774ab647ccd..e54d7ef3bc0 100644
--- a/configs/giedi_defconfig
+++ b/configs/giedi_defconfig
@@ -22,14 +22,15 @@ CONFIG_SPL_STACK=0x13e000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x128000
 CONFIG_SPL_BSS_MAX_SIZE=0x1000
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x80280000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x2000
 CONFIG_IDENT_STRING=" ##v01.07"
-CONFIG_SYS_LOAD_ADDR=0x80280000
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
@@ -56,7 +57,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_WATCHDOG=y
@@ -131,4 +131,3 @@ CONFIG_DM_THERMAL=y
 CONFIG_IMX_SCU_THERMAL=y
 # CONFIG_SPL_WDT is not set
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig
index 53b2ce97e88..e1ee43d15f1 100644
--- a/configs/goflexhome_defconfig
+++ b/configs/goflexhome_defconfig
@@ -14,8 +14,8 @@ CONFIG_TARGET_GOFLEXHOME=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-goflexnet"
-CONFIG_IDENT_STRING="\nSeagate GoFlex Home"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nSeagate GoFlex Home"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:root; ubifsload 0x800000 ${kernel}; bootm 0x800000"
diff --git a/configs/gose_defconfig b/configs/gose_defconfig
index 0f76ae147ef..be7867860a5 100644
--- a/configs/gose_defconfig
+++ b/configs/gose_defconfig
@@ -25,12 +25,13 @@ CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0xe6340000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_ENV_ADDR=0xC0000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CBSIZE=256
@@ -40,7 +41,6 @@ CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000
@@ -105,4 +105,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/grouper_common_defconfig b/configs/grouper_common_defconfig
index 001f5b88040..7d8cb6110f3 100644
--- a/configs/grouper_common_defconfig
+++ b/configs/grouper_common_defconfig
@@ -10,10 +10,10 @@ CONFIG_ENV_OFFSET=0xFFFFD000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-grouper-E1565"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_GROUPER=y
 CONFIG_CMD_EBTUPDATE=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/grpeach_defconfig b/configs/grpeach_defconfig
index 70a80088bfb..fcc079e7fc2 100644
--- a/configs/grpeach_defconfig
+++ b/configs/grpeach_defconfig
@@ -15,8 +15,9 @@ CONFIG_DEFAULT_DEVICE_TREE="renesas/r7s72100-gr-peach"
 CONFIG_RZA1=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=524288
-CONFIG_SYS_CLK_FREQ=66666666
 CONFIG_SYS_LOAD_ADDR=0x20400000
+CONFIG_SYS_CLK_FREQ=66666666
+# CONFIG_EFI_LOADER is not set
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="ignore_loglevel"
@@ -67,4 +68,3 @@ CONFIG_RENESAS_OSTM_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_STORAGE=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig
index 5371ee403b3..0fab4c38e0e 100644
--- a/configs/guruplug_defconfig
+++ b/configs/guruplug_defconfig
@@ -11,8 +11,8 @@ CONFIG_TARGET_GURUPLUG=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xE0000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-guruplug-server-plus"
-CONFIG_IDENT_STRING="\nMarvell-GuruPlug"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nMarvell-GuruPlug"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=917504
diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig
index 213a5e5eca8..44f37c55f27 100644
--- a/configs/gwventana_emmc_defconfig
+++ b/configs/gwventana_emmc_defconfig
@@ -22,6 +22,7 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK_R_ADDR=0x18000000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0xD1400
@@ -31,7 +32,6 @@ CONFIG_AHCI=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig
index 2306cd61068..82b359da68d 100644
--- a/configs/gwventana_nand_defconfig
+++ b/configs/gwventana_nand_defconfig
@@ -22,6 +22,7 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK_R_ADDR=0x18000000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x1080000
@@ -31,7 +32,6 @@ CONFIG_AHCI=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
diff --git a/configs/gxp_defconfig b/configs/gxp_defconfig
index d37749bd5e3..d194ffc1275 100644
--- a/configs/gxp_defconfig
+++ b/configs/gxp_defconfig
@@ -12,8 +12,9 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x60000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="hpe-bmc-dl360gen10"
-CONFIG_ENV_OFFSET_REDUND=0x70000
 CONFIG_SYS_LOAD_ADDR=0x40100000
+CONFIG_ENV_OFFSET_REDUND=0x70000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
@@ -59,4 +60,3 @@ CONFIG_TIMER=y
 CONFIG_GXP_TIMER=y
 # CONFIG_RANDOM_UUID is not set
 CONFIG_SHA512=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig
index 36eca17126b..a64e7519023 100644
--- a/configs/harmony_defconfig
+++ b/configs/harmony_defconfig
@@ -8,10 +8,10 @@ CONFIG_ENV_OFFSET=0x1FFE0000
 CONFIG_DEFAULT_DEVICE_TREE="tegra20-harmony"
 CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_HARMONY=y
 CONFIG_TEGRA_ENABLE_UARTD=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2085
diff --git a/configs/hc2910_2aghd05_defconfig b/configs/hc2910_2aghd05_defconfig
index e68b44478a9..d06f922ba57 100644
--- a/configs/hc2910_2aghd05_defconfig
+++ b/configs/hc2910_2aghd05_defconfig
@@ -8,9 +8,10 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x1F0000
 CONFIG_DEFAULT_DEVICE_TREE="hi3798mv200-hc2910-2aghd05"
-CONFIG_IDENT_STRING="HC2910"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="HC2910"
 # CONFIG_EXPERT is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_CBSIZE=512
@@ -46,4 +47,3 @@ CONFIG_MMC_DW_K3=y
 CONFIG_FS_BTRFS=y
 CONFIG_FAT_WRITE=y
 CONFIG_REGEX=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig
index 29b6230e901..61d110e6f4c 100644
--- a/configs/helios4_defconfig
+++ b/configs/helios4_defconfig
@@ -17,10 +17,11 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -61,7 +62,6 @@ CONFIG_SPL_I2C_EEPROM=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_MV=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_ANEG_TIMEOUT=8000
diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig
index cc727380dae..b07abd97350 100644
--- a/configs/highbank_defconfig
+++ b/configs/highbank_defconfig
@@ -12,8 +12,8 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="highbank"
 CONFIG_SYS_BOOTCOUNT_ADDR=0xfff3cf0c
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_ADDR=0xFFF88000
 CONFIG_FIT=y
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/hihope_rzg2_defconfig b/configs/hihope_rzg2_defconfig
index fc412d04ac7..bc64a806f2e 100644
--- a/configs/hihope_rzg2_defconfig
+++ b/configs/hihope_rzg2_defconfig
@@ -11,8 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a774a1-hihope-rzg2m"
 CONFIG_RCAR_GEN3=y
 CONFIG_TARGET_HIHOPE_RZG2=y
 CONFIG_SYS_MONITOR_LEN=1048576
-# CONFIG_SPL is not set
 CONFIG_SYS_LOAD_ADDR=0x58000000
+# CONFIG_SPL is not set
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
diff --git a/configs/hikey960_defconfig b/configs/hikey960_defconfig
index 3c532a11f17..a684994722c 100644
--- a/configs/hikey960_defconfig
+++ b/configs/hikey960_defconfig
@@ -9,8 +9,8 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7fff0
 CONFIG_ENV_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="hi3660-hikey960"
 CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_IDENT_STRING="\nHikey960"
 CONFIG_SYS_LOAD_ADDR=0x80000
+CONFIG_IDENT_STRING="\nHikey960"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/hikey_defconfig b/configs/hikey_defconfig
index 67118da1c42..c4f63619292 100644
--- a/configs/hikey_defconfig
+++ b/configs/hikey_defconfig
@@ -9,8 +9,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x0
 CONFIG_DEFAULT_DEVICE_TREE="hi6220-hikey"
 CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_IDENT_STRING="hikey"
 CONFIG_SYS_LOAD_ADDR=0x80000
+CONFIG_IDENT_STRING="hikey"
 CONFIG_REMAKE_ELF=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
diff --git a/configs/hmibsc_defconfig b/configs/hmibsc_defconfig
index 86ca4f81fed..38bc73ffa05 100644
--- a/configs/hmibsc_defconfig
+++ b/configs/hmibsc_defconfig
@@ -11,8 +11,8 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x0
 CONFIG_DEFAULT_DEVICE_TREE="apq8016-schneider-hmibsc"
 CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_IDENT_STRING="\nSchneider Electric-HMIBSC"
 CONFIG_SYS_LOAD_ADDR=0x80080000
+CONFIG_IDENT_STRING="\nSchneider Electric-HMIBSC"
 CONFIG_REMAKE_ELF=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/hsdk_4xd_defconfig b/configs/hsdk_4xd_defconfig
index bca6c3ae33a..4c9d2e76866 100644
--- a/configs/hsdk_4xd_defconfig
+++ b/configs/hsdk_4xd_defconfig
@@ -10,12 +10,12 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="hsdk-4xd"
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART_BASE=0xf0005000
 CONFIG_DEBUG_UART_CLOCK=33333333
 CONFIG_SYS_CLK_FREQ=500000000
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200n8"
 CONFIG_SYS_CBSIZE=2048
diff --git a/configs/hsdk_defconfig b/configs/hsdk_defconfig
index d7bd4e387eb..2aab639f6a7 100644
--- a/configs/hsdk_defconfig
+++ b/configs/hsdk_defconfig
@@ -9,12 +9,12 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="hsdk"
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART_BASE=0xf0005000
 CONFIG_DEBUG_UART_CLOCK=33333333
 CONFIG_SYS_CLK_FREQ=500000000
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200n8"
 CONFIG_SYS_CBSIZE=2048
diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig
index 32b0e1c3958..dcfbcc83eb3 100644
--- a/configs/ib62x0_defconfig
+++ b/configs/ib62x0_defconfig
@@ -11,8 +11,8 @@ CONFIG_TARGET_IB62X0=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xE0000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ib62x0"
-CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/ibex-ast2700_defconfig b/configs/ibex-ast2700_defconfig
index 855615cc1ea..e1d5be29b1c 100644
--- a/configs/ibex-ast2700_defconfig
+++ b/configs/ibex-ast2700_defconfig
@@ -15,10 +15,11 @@ CONFIG_SPL_TEXT_BASE=0x14bc0080
 CONFIG_DM_RESET=y
 CONFIG_SPL_BSS_START_ADDR=0x14bd7800
 CONFIG_SPL_BSS_MAX_SIZE=0x800
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x83000000
 CONFIG_SPL_SIZE_LIMIT=0x16000
 CONFIG_SPL=y
 CONFIG_SYS_MEM_TOP_HIDE=0x10000000
-CONFIG_SYS_LOAD_ADDR=0x83000000
 CONFIG_BUILD_TARGET=""
 CONFIG_TARGET_ASPEED_AST2700_IBEX=y
 # CONFIG_RISCV_ISA_F is not set
@@ -31,12 +32,12 @@ CONFIG_STACK_SIZE_SHIFT=11
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_STACK_SIZE=0x100000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x200c0000
 # CONFIG_BOOTSTD is not set
-CONFIG_SYS_BOOTM_LEN=0x4000000
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=276
@@ -46,7 +47,6 @@ CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_MAX_SIZE=0x16000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 # CONFIG_CMD_BOOTD is not set
 # CONFIG_CMD_BOOTI is not set
@@ -91,4 +91,3 @@ CONFIG_AST_IBEX_TIMER=y
 CONFIG_VIDEO=y
 # CONFIG_VIDEO_LOGO is not set
 # CONFIG_RSA is not set
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig
index 45ffbd92dba..2823965f913 100644
--- a/configs/iconnect_defconfig
+++ b/configs/iconnect_defconfig
@@ -14,8 +14,8 @@ CONFIG_TARGET_ICONNECT=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-iconnect"
-CONFIG_IDENT_STRING=" Iomega iConnect"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" Iomega iConnect"
 CONFIG_PCI=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/ideapad-yoga-11_defconfig b/configs/ideapad-yoga-11_defconfig
index 25624c68869..4618c5253b6 100644
--- a/configs/ideapad-yoga-11_defconfig
+++ b/configs/ideapad-yoga-11_defconfig
@@ -10,10 +10,10 @@ CONFIG_ENV_OFFSET=0xFFFFD000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-lenovo-ideapad-yoga-11"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_IDEAPAD_YOGA_11=y
 CONFIG_CMD_EBTUPDATE=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig
index d1470014fd7..c7212d723ef 100644
--- a/configs/imx28_xea_defconfig
+++ b/configs/imx28_xea_defconfig
@@ -21,12 +21,13 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x20000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
+CONFIG_SYS_LOAD_ADDR=0x42000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPL_SIZE_LIMIT=0xa000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x90000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL_PAYLOAD="u-boot.img"
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=458752
@@ -48,8 +49,6 @@ CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x0
 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
 CONFIG_SPL_DMA=y
@@ -105,7 +104,6 @@ CONFIG_MMC_MXS=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/imx28_xea_sb_defconfig b/configs/imx28_xea_sb_defconfig
index aa1116aa4b0..39e1d1cfc99 100644
--- a/configs/imx28_xea_sb_defconfig
+++ b/configs/imx28_xea_sb_defconfig
@@ -12,9 +12,10 @@ CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="imx28-xea"
 CONFIG_SPL_TEXT_BASE=0x1000
 CONFIG_TARGET_XEA=y
+CONFIG_SYS_LOAD_ADDR=0x42000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x90000
-CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL_PAYLOAD="u-boot.img"
 CONFIG_FIT=y
 CONFIG_OF_BOARD_SETUP=y
@@ -30,7 +31,6 @@ CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0
 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
 CONFIG_SPL_DMA=y
@@ -76,7 +76,6 @@ CONFIG_MMC_MXS=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/imx6dl_sielaff_defconfig b/configs/imx6dl_sielaff_defconfig
index 41574a41af1..c4e02a8f0b9 100644
--- a/configs/imx6dl_sielaff_defconfig
+++ b/configs/imx6dl_sielaff_defconfig
@@ -19,6 +19,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6dl-sielaff"
 CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
@@ -82,7 +83,6 @@ CONFIG_NAND_MXS=y
 CONFIG_NAND_MXS_DT=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_MTD=y
diff --git a/configs/imx6q_bosch_acc_defconfig b/configs/imx6q_bosch_acc_defconfig
index dce1b64bf69..354b73752ad 100644
--- a/configs/imx6q_bosch_acc_defconfig
+++ b/configs/imx6q_bosch_acc_defconfig
@@ -27,6 +27,7 @@ CONFIG_IMX_HAB=y
 # CONFIG_CMD_DEKBLOB is not set
 CONFIG_BUILD_TARGET=""
 # CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
@@ -100,4 +101,3 @@ CONFIG_WDT=y
 CONFIG_EXT4_WRITE=y
 CONFIG_FS_FAT=y
 CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig
index b893da6c92a..2f68e2cf384 100644
--- a/configs/imx6q_logic_defconfig
+++ b/configs/imx6q_logic_defconfig
@@ -30,7 +30,6 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SPL_RAW_IMAGE_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC=y
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_DMA=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
 CONFIG_SPL_I2C=y
diff --git a/configs/imx8mm-cl-iot-gate-optee_defconfig b/configs/imx8mm-cl-iot-gate-optee_defconfig
index 0b7dd632b59..7ae8d544837 100644
--- a/configs/imx8mm-cl-iot-gate-optee_defconfig
+++ b/configs/imx8mm-cl-iot-gate-optee_defconfig
@@ -19,13 +19,18 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SPL=y
+CONFIG_EFI_SECURE_BOOT=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_CBSIZE=2048
@@ -38,7 +43,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
@@ -153,8 +157,3 @@ CONFIG_SPL_TINY_MEMSET=y
 CONFIG_TPM=y
 CONFIG_LZO=y
 CONFIG_BZIP2=y
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
-CONFIG_EFI_SECURE_BOOT=y
diff --git a/configs/imx8mm-cl-iot-gate_defconfig b/configs/imx8mm-cl-iot-gate_defconfig
index 9312e9f72a7..ca0335bd124 100644
--- a/configs/imx8mm-cl-iot-gate_defconfig
+++ b/configs/imx8mm-cl-iot-gate_defconfig
@@ -20,14 +20,19 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x204000
-CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_EFI_SECURE_BOOT=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_CBSIZE=2048
@@ -40,7 +45,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
@@ -156,8 +160,3 @@ CONFIG_SPL_TINY_MEMSET=y
 CONFIG_TPM=y
 CONFIG_LZO=y
 CONFIG_BZIP2=y
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
-CONFIG_EFI_SECURE_BOOT=y
diff --git a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig
index f37297cdbf7..14f8bfe60f4 100644
--- a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig
+++ b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig
@@ -19,12 +19,12 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-ctouch2.dtb"
@@ -37,7 +37,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_POWER=y
 CONFIG_SYS_PROMPT="u-boot=> "
diff --git a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig
index 950246ecded..d0d46d2c250 100644
--- a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig
+++ b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig
@@ -19,12 +19,12 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-edimm2.2.dtb"
@@ -37,7 +37,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_POWER=y
 CONFIG_SYS_PROMPT="u-boot=> "
diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-mx8menlo_defconfig
index 8644177a769..d4ceca70c4e 100644
--- a/configs/imx8mm-mx8menlo_defconfig
+++ b/configs/imx8mm-mx8menlo_defconfig
@@ -22,11 +22,11 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_OFFSET_REDUND=0xFFFFDE00
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_FIT=y
@@ -53,7 +53,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mm-phygate-tauri-l_defconfig b/configs/imx8mm-phygate-tauri-l_defconfig
index 6570c9fbcd6..c69fe50ec81 100644
--- a/configs/imx8mm-phygate-tauri-l_defconfig
+++ b/configs/imx8mm-phygate-tauri-l_defconfig
@@ -19,9 +19,9 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3E0000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
@@ -38,7 +38,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig
index 7f0cb9a06bf..3411d2b2b80 100644
--- a/configs/imx8mm_beacon_defconfig
+++ b/configs/imx8mm_beacon_defconfig
@@ -21,12 +21,12 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi;"
@@ -39,7 +39,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mm_beacon_fspi_defconfig b/configs/imx8mm_beacon_fspi_defconfig
index 354a671bafb..44af74bf772 100644
--- a/configs/imx8mm_beacon_fspi_defconfig
+++ b/configs/imx8mm_beacon_fspi_defconfig
@@ -21,12 +21,12 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi;"
@@ -42,7 +42,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_NOR_SUPPORT=y
diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig
index 34566d4b7ef..77bdefd1aee 100644
--- a/configs/imx8mm_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mm_data_modul_edm_sbc_defconfig
@@ -26,17 +26,17 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x60000000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_OFFSET_REDUND=0xFFFC0000
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x60000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTARGS=y
@@ -60,11 +60,9 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SPL_YMODEM_SUPPORT=y
@@ -99,6 +97,7 @@ CONFIG_CMD_LSBLK=y
 CONFIG_CMD_MBR=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_READ=y
@@ -137,7 +136,6 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
 CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
-CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig
index 3fd2d9ffd11..1a15292e2fa 100644
--- a/configs/imx8mm_evk_defconfig
+++ b/configs/imx8mm_evk_defconfig
@@ -19,8 +19,8 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
@@ -36,7 +36,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mm_evk_fspi_defconfig b/configs/imx8mm_evk_fspi_defconfig
index 96c0a46bcec..4898384118c 100644
--- a/configs/imx8mm_evk_fspi_defconfig
+++ b/configs/imx8mm_evk_fspi_defconfig
@@ -22,8 +22,8 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
@@ -40,7 +40,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_NOR_SUPPORT=y
diff --git a/configs/imx8mm_phg_defconfig b/configs/imx8mm_phg_defconfig
index 2fd319b3a6c..f0867e6482e 100644
--- a/configs/imx8mm_phg_defconfig
+++ b/configs/imx8mm_phg_defconfig
@@ -19,9 +19,9 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x204000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
@@ -37,7 +37,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig
index 3633401a349..4a4e5549232 100644
--- a/configs/imx8mm_venice_defconfig
+++ b/configs/imx8mm_venice_defconfig
@@ -21,16 +21,16 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x10000000
+CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f8000
-CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
@@ -45,7 +45,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig
index 7a1931510e8..23bfaf2490f 100644
--- a/configs/imx8mn_beacon_2g_defconfig
+++ b/configs/imx8mn_beacon_2g_defconfig
@@ -24,16 +24,16 @@ CONFIG_SPL_STACK=0x980000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x44000000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
@@ -49,7 +49,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig
index eebfb0d7a7d..aa8341226a1 100644
--- a/configs/imx8mn_beacon_defconfig
+++ b/configs/imx8mn_beacon_defconfig
@@ -23,16 +23,16 @@ CONFIG_SPL_STACK=0x980000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x44000000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
@@ -48,7 +48,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mn_beacon_fspi_defconfig b/configs/imx8mn_beacon_fspi_defconfig
index 6acbb8a0215..3a92f0ba3bb 100644
--- a/configs/imx8mn_beacon_fspi_defconfig
+++ b/configs/imx8mn_beacon_fspi_defconfig
@@ -23,16 +23,16 @@ CONFIG_SPL_STACK=0x980000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x44000000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
@@ -48,7 +48,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
index 29d7cdab922..364f25f0bfe 100644
--- a/configs/imx8mn_bsh_smm_s2_defconfig
+++ b/configs/imx8mn_bsh_smm_s2_defconfig
@@ -20,13 +20,13 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="freescale/imx8mn-bsh-smm-s2.dtb"
@@ -42,9 +42,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MTD=y
diff --git a/configs/imx8mn_bsh_smm_s2pro_defconfig b/configs/imx8mn_bsh_smm_s2pro_defconfig
index 151a9a520ab..e8f3d406827 100644
--- a/configs/imx8mn_bsh_smm_s2pro_defconfig
+++ b/configs/imx8mn_bsh_smm_s2pro_defconfig
@@ -21,13 +21,13 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="freescale/imx8mn-bsh-smm-s2pro.dtb"
@@ -44,7 +44,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig
index 93380a0ddde..b20d0b072b5 100644
--- a/configs/imx8mn_ddr4_evk_defconfig
+++ b/configs/imx8mn_ddr4_evk_defconfig
@@ -19,13 +19,13 @@ CONFIG_SPL_STACK=0x980000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="imx8mn-ddr4-evk.dtb"
@@ -42,7 +42,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_WATCHDOG=y
diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig
index 5405f8f5265..ee571c781e5 100644
--- a/configs/imx8mn_evk_defconfig
+++ b/configs/imx8mn_evk_defconfig
@@ -19,13 +19,13 @@ CONFIG_SPL_STACK=0x980000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="imx8mn-evk.dtb"
@@ -45,7 +45,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mn_var_som_defconfig b/configs/imx8mn_var_som_defconfig
index 0155cb2044e..1922f2d940c 100644
--- a/configs/imx8mn_var_som_defconfig
+++ b/configs/imx8mn_var_som_defconfig
@@ -22,14 +22,14 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
@@ -47,7 +47,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig
index d2925f247e1..b0a7f072931 100644
--- a/configs/imx8mn_venice_defconfig
+++ b/configs/imx8mn_venice_defconfig
@@ -20,16 +20,16 @@ CONFIG_SPL_STACK=0x980000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x950000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x10000000
+CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f8000
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
@@ -47,7 +47,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_WATCHDOG=y
diff --git a/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig b/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig
index 497a908f7a7..58c525d4837 100644
--- a/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig
+++ b/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig
@@ -22,13 +22,13 @@ CONFIG_SPL_STACK=0x960000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x98fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="imx8mp-icore-mx8mp-edimm2.2.dtb"
@@ -45,7 +45,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig
index ba676c95467..2a54c769d38 100644
--- a/configs/imx8mp_beacon_defconfig
+++ b/configs/imx8mp_beacon_defconfig
@@ -24,19 +24,19 @@ CONFIG_SPL_STACK=0x960000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x98fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_ARMV8_SPL_EXCEPTION_VECTORS=y
 CONFIG_ARMV8_SET_SMPEN=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_ARMV8_EA_EL3_FIRST=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_PCI=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
@@ -54,7 +54,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mp_data_modul_edm_sbc_defconfig b/configs/imx8mp_data_modul_edm_sbc_defconfig
index 0e910e2a2ea..7559c9d7253 100644
--- a/configs/imx8mp_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mp_data_modul_edm_sbc_defconfig
@@ -27,6 +27,8 @@ CONFIG_SPL_STACK=0x96fc00
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x96fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_DEBUG_UART_BASE=0x30880000
@@ -36,14 +38,12 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTARGS=y
@@ -67,7 +67,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_SPI_FLASH=y
@@ -106,6 +105,7 @@ CONFIG_CMD_LSBLK=y
 CONFIG_CMD_MBR=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_READ=y
@@ -144,7 +144,6 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
 CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
-CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
diff --git a/configs/imx8mp_debix_model_a_defconfig b/configs/imx8mp_debix_model_a_defconfig
index c76ab232b12..dcc529f9fc2 100644
--- a/configs/imx8mp_debix_model_a_defconfig
+++ b/configs/imx8mp_debix_model_a_defconfig
@@ -19,13 +19,13 @@ CONFIG_SPL_STACK=0x960000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x98fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="imx8mp-debix-model-a.dtb"
@@ -38,7 +38,6 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mp_dhcom_drc02_defconfig b/configs/imx8mp_dhcom_drc02_defconfig
new file mode 100644
index 00000000000..d0877ad6f72
--- /dev/null
+++ b/configs/imx8mp_dhcom_drc02_defconfig
@@ -0,0 +1,275 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8M=y
+CONFIG_TEXT_BASE=0x40200000
+CONFIG_SYS_MALLOC_LEN=0x1000000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0xFE0000
+CONFIG_ENV_SECT_SIZE=0x1000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8mp-dhcom-drc02"
+CONFIG_SPL_TEXT_BASE=0x920000
+CONFIG_TARGET_IMX8MP_DH_DHCOM_PDK2=y
+CONFIG_DM_RESET=y
+CONFIG_SYS_MONITOR_LEN=1048576
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
+CONFIG_SPL_STACK=0x96fc00
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x96fc00
+CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x50000000
+CONFIG_SPL=y
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_DEBUG_UART_BASE=0x30860000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_ENV_OFFSET_REDUND=0xFF0000
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
+CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run dh_update_env distro_bootcmd ; reset"
+CONFIG_USE_PREBOOT=y
+CONFIG_DEFAULT_FDT_FILE="imx8mp-dhcom-drc02.dtb"
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2081
+CONFIG_CONSOLE_MUX=y
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_ARCH_MISC_INIT=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x26000
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+# CONFIG_SPL_FIT_IMAGE_TINY is not set
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="u-boot=> "
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_EXPORTENV is not set
+CONFIG_CMD_ERASEENV=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_SIZE=16384
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_SHA1SUM_VERIFY=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_LSBLK=y
+CONFIG_CMD_MBR=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_MMC_SPEED_MODE_SET=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_XXD=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_DHCP6=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_WGET=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_BOOTCOUNT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GETTIME=y
+CONFIG_CMD_KASLRSEED=y
+CONFIG_CMD_SYSBOOT=y
+CONFIG_CMD_UUID=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_SMC=y
+CONFIG_HASH_VERIFY=y
+CONFIG_CMD_BTRFS=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
+CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SECT_SIZE_AUTO=y
+CONFIG_ENV_SPI_MAX_HZ=80000000
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_IP_DEFRAG=y
+CONFIG_TFTP_TSIZE=y
+CONFIG_PROT_TCP_SACK=y
+CONFIG_IPV6=y
+CONFIG_SPL_DM=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_IMX8MP=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_FSL_CAAM=y
+CONFIG_IMX8M_DRAM_INLINE_ECC=y
+CONFIG_DFU_TFTP=y
+CONFIG_DFU_TIMEOUT=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_MTD=y
+CONFIG_DFU_RAM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x42800000
+CONFIG_FASTBOOT_BUF_SIZE=0x20000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_GPIO_HOG=y
+CONFIG_SPL_GPIO_HOG=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+# CONFIG_INPUT is not set
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+# CONFIG_SPI_FLASH_UNLOCK_ALL is not set
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_ANEG_TIMEOUT=20000
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_PHY_SMSC=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_IMX=y
+CONFIG_FEC_MXC=y
+CONFIG_RGMII=y
+CONFIG_MII=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_IMX=y
+CONFIG_PHY_IMX8MQ_USB=y
+CONFIG_PHY_IMX8M_PCIE=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8M=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8M_POWER_DOMAIN=y
+CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PCA9450=y
+CONFIG_SPL_DM_PMIC_PCA9450=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PCA9450=y
+CONFIG_SPL_DM_REGULATOR_PCA9450=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RNG=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_M41T62=y
+CONFIG_CONS_INDEX=2
+CONFIG_DM_SERIAL=y
+# CONFIG_SPL_DM_SERIAL is not set
+CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
+CONFIG_MXC_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
+CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="DH electronics"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_USB_FUNCTION_ACM=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_IMX_WATCHDOG=y
diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig
index f807b0cfc37..9aa2fafd491 100644
--- a/configs/imx8mp_dhcom_pdk2_defconfig
+++ b/configs/imx8mp_dhcom_pdk2_defconfig
@@ -26,6 +26,8 @@ CONFIG_SPL_STACK=0x96fc00
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x96fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_DEBUG_UART_BASE=0x30860000
@@ -33,7 +35,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_ENV_OFFSET_REDUND=0xFF0000
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
@@ -41,7 +42,6 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
 CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY=y
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTARGS=y
@@ -65,7 +65,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 # CONFIG_SPL_FIT_IMAGE_TINY is not set
 CONFIG_SPL_I2C=y
@@ -102,6 +101,7 @@ CONFIG_CMD_LSBLK=y
 CONFIG_CMD_MBR=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_READ=y
@@ -140,7 +140,6 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
 CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
-CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig
index 05895d6dd6f..03a0485f75e 100644
--- a/configs/imx8mp_dhcom_pdk3_defconfig
+++ b/configs/imx8mp_dhcom_pdk3_defconfig
@@ -26,6 +26,8 @@ CONFIG_SPL_STACK=0x96fc00
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x96fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_DEBUG_UART_BASE=0x30860000
@@ -33,7 +35,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_ENV_OFFSET_REDUND=0xFF0000
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
@@ -42,7 +43,6 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
 CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY=y
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTARGS=y
@@ -67,7 +67,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 # CONFIG_SPL_FIT_IMAGE_TINY is not set
 CONFIG_SPL_I2C=y
@@ -104,6 +103,7 @@ CONFIG_CMD_LSBLK=y
 CONFIG_CMD_MBR=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_PCI=y
@@ -143,7 +143,6 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
 CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
-CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
diff --git a/configs/imx8mp_dhcom_picoitx_defconfig b/configs/imx8mp_dhcom_picoitx_defconfig
new file mode 100644
index 00000000000..7cefe9ae821
--- /dev/null
+++ b/configs/imx8mp_dhcom_picoitx_defconfig
@@ -0,0 +1,273 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8M=y
+CONFIG_TEXT_BASE=0x40200000
+CONFIG_SYS_MALLOC_LEN=0x1000000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0xFE0000
+CONFIG_ENV_SECT_SIZE=0x1000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8mp-dhcom-picoitx"
+CONFIG_SPL_TEXT_BASE=0x920000
+CONFIG_TARGET_IMX8MP_DH_DHCOM_PDK2=y
+CONFIG_DM_RESET=y
+CONFIG_SYS_MONITOR_LEN=1048576
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090
+CONFIG_SPL_STACK=0x96fc00
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x96fc00
+CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x50000000
+CONFIG_SPL=y
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_DEBUG_UART_BASE=0x30860000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_ENV_OFFSET_REDUND=0xFF0000
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
+CONFIG_DEBUG_UART=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
+CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run dh_update_env distro_bootcmd ; reset"
+CONFIG_USE_PREBOOT=y
+CONFIG_DEFAULT_FDT_FILE="imx8mp-dhcom-picoitx.dtb"
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2081
+CONFIG_CONSOLE_MUX=y
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_ARCH_MISC_INIT=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x26000
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+# CONFIG_SPL_FIT_IMAGE_TINY is not set
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="u-boot=> "
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_EXPORTENV is not set
+CONFIG_CMD_ERASEENV=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_SIZE=16384
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_SHA1SUM_VERIFY=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_LSBLK=y
+CONFIG_CMD_MBR=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_BKOPS_ENABLE=y
+CONFIG_MMC_SPEED_MODE_SET=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_XXD=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_DHCP6=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_WGET=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_BOOTCOUNT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GETTIME=y
+CONFIG_CMD_KASLRSEED=y
+CONFIG_CMD_SYSBOOT=y
+CONFIG_CMD_UUID=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_SMC=y
+CONFIG_HASH_VERIFY=y
+CONFIG_CMD_BTRFS=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
+CONFIG_MTDIDS_DEFAULT="nor0=flash@0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SECT_SIZE_AUTO=y
+CONFIG_ENV_SPI_MAX_HZ=80000000
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_IP_DEFRAG=y
+CONFIG_TFTP_TSIZE=y
+CONFIG_PROT_TCP_SACK=y
+CONFIG_IPV6=y
+CONFIG_SPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_IMX8MP=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_FSL_CAAM=y
+CONFIG_IMX8M_DRAM_INLINE_ECC=y
+CONFIG_DFU_TFTP=y
+CONFIG_DFU_TIMEOUT=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_MTD=y
+CONFIG_DFU_RAM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x42800000
+CONFIG_FASTBOOT_BUF_SIZE=0x20000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_GPIO_HOG=y
+CONFIG_SPL_GPIO_HOG=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+# CONFIG_INPUT is not set
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+# CONFIG_SPI_FLASH_UNLOCK_ALL is not set
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_ANEG_TIMEOUT=20000
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_PHY_SMSC=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_IMX=y
+CONFIG_FEC_MXC=y
+CONFIG_RGMII=y
+CONFIG_MII=y
+CONFIG_PHY_IMX8MQ_USB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8M=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8M_POWER_DOMAIN=y
+CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PCA9450=y
+CONFIG_SPL_DM_PMIC_PCA9450=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PCA9450=y
+CONFIG_SPL_DM_REGULATOR_PCA9450=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RNG=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_M41T62=y
+CONFIG_CONS_INDEX=2
+CONFIG_DM_SERIAL=y
+# CONFIG_SPL_DM_SERIAL is not set
+CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
+CONFIG_MXC_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
+CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="DH electronics"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_USB_FUNCTION_ACM=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_IMX_WATCHDOG=y
diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig
index 4b9ac30fed1..ecf75a06b59 100644
--- a/configs/imx8mp_evk_defconfig
+++ b/configs/imx8mp_evk_defconfig
@@ -19,13 +19,13 @@ CONFIG_SPL_STACK=0x960000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x98fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb"
@@ -42,7 +42,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mp_rsb3720a1_4G_defconfig b/configs/imx8mp_rsb3720a1_4G_defconfig
index 7a7f3907b06..898ed0e2467 100644
--- a/configs/imx8mp_rsb3720a1_4G_defconfig
+++ b/configs/imx8mp_rsb3720a1_4G_defconfig
@@ -25,16 +25,21 @@ CONFIG_SPL_STACK=0x960000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x98fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_REMAKE_ELF=y
+CONFIG_EFI_SECURE_BOOT=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
@@ -54,8 +59,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
@@ -165,8 +168,3 @@ CONFIG_IMX_WATCHDOG=y
 CONFIG_SHA384=y
 CONFIG_LZO=y
 CONFIG_BZIP2=y
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
-CONFIG_EFI_SECURE_BOOT=y
diff --git a/configs/imx8mp_rsb3720a1_6G_defconfig b/configs/imx8mp_rsb3720a1_6G_defconfig
index 75d110f91d1..5eeb3fda270 100644
--- a/configs/imx8mp_rsb3720a1_6G_defconfig
+++ b/configs/imx8mp_rsb3720a1_6G_defconfig
@@ -25,16 +25,21 @@ CONFIG_SPL_STACK=0x960000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x98fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_REMAKE_ELF=y
+CONFIG_EFI_SECURE_BOOT=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
@@ -54,7 +59,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
@@ -165,8 +169,3 @@ CONFIG_IMX_WATCHDOG=y
 CONFIG_SHA384=y
 CONFIG_LZO=y
 CONFIG_BZIP2=y
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
-CONFIG_EFI_SECURE_BOOT=y
diff --git a/configs/imx8mp_venice_defconfig b/configs/imx8mp_venice_defconfig
index 09a88418143..4b93e0c0df4 100644
--- a/configs/imx8mp_venice_defconfig
+++ b/configs/imx8mp_venice_defconfig
@@ -21,17 +21,17 @@ CONFIG_SPL_STACK=0x960000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x98fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x10000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f8000
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
@@ -49,7 +49,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_WATCHDOG=y
diff --git a/configs/imx8mq_cm_defconfig b/configs/imx8mq_cm_defconfig
index ac45c3d669d..8e0b7a71eca 100644
--- a/configs/imx8mq_cm_defconfig
+++ b/configs/imx8mq_cm_defconfig
@@ -21,14 +21,14 @@ CONFIG_SPL_STACK=0x187ff0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x180000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_SPL_FIT_PRINT=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=1050
@@ -41,7 +41,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SYS_PROMPT="u-boot=> "
diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig
index 2a51681c335..fd129da7cbc 100644
--- a/configs/imx8mq_evk_defconfig
+++ b/configs/imx8mq_evk_defconfig
@@ -23,9 +23,9 @@ CONFIG_SPL_STACK=0x187ff0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x180000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
@@ -43,7 +43,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig
index 4c36827b2ae..487dae672ab 100644
--- a/configs/imx8mq_phanbell_defconfig
+++ b/configs/imx8mq_phanbell_defconfig
@@ -23,14 +23,14 @@ CONFIG_SPL_STACK=0x187ff0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x180000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SD_BOOT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
@@ -44,7 +44,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8mq_reform2_defconfig b/configs/imx8mq_reform2_defconfig
index 2a951f16de4..475320b8074 100644
--- a/configs/imx8mq_reform2_defconfig
+++ b/configs/imx8mq_reform2_defconfig
@@ -23,9 +23,9 @@ CONFIG_SPL_STACK=0x187ff0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x180000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
@@ -46,7 +46,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx8qm_dmsse20a1_defconfig b/configs/imx8qm_dmsse20a1_defconfig
index 43d8205760f..9f2a6d78cee 100644
--- a/configs/imx8qm_dmsse20a1_defconfig
+++ b/configs/imx8qm_dmsse20a1_defconfig
@@ -24,13 +24,14 @@ CONFIG_SPL_STACK=0x13e000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x128000
 CONFIG_SPL_BSS_MAX_SIZE=0x1000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x04000000
 CONFIG_SYS_LOAD_ADDR=0x80280000
+CONFIG_SPL=y
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x04000000
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
@@ -101,4 +102,3 @@ CONFIG_RTC_RV8803=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
index a96fb310cdd..779ae9af120 100644
--- a/configs/imx8qm_mek_defconfig
+++ b/configs/imx8qm_mek_defconfig
@@ -22,9 +22,10 @@ CONFIG_SPL_STACK=0x13e000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x128000
 CONFIG_SPL_BSS_MAX_SIZE=0x1000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x80280000
+CONFIG_SPL=y
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_BOOTDELAY=3
@@ -49,7 +50,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_WATCHDOG=y
@@ -108,4 +108,3 @@ CONFIG_SPL_DM_REGULATOR_GPIO=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/imx8qm_rom7720_a1_4G_defconfig b/configs/imx8qm_rom7720_a1_4G_defconfig
index bee69645876..e0c7378b93b 100644
--- a/configs/imx8qm_rom7720_a1_4G_defconfig
+++ b/configs/imx8qm_rom7720_a1_4G_defconfig
@@ -19,9 +19,10 @@ CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x128000
 CONFIG_SPL_BSS_MAX_SIZE=0x1000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x80280000
+CONFIG_SPL=y
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
@@ -92,4 +93,3 @@ CONFIG_SPL_DM_REGULATOR_GPIO=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index 56cc8347926..539debcbb70 100644
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -22,12 +22,13 @@ CONFIG_SPL_STACK=0x13e000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x128000
 CONFIG_SPL_BSS_MAX_SIZE=0x1000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_LOAD_ADDR=0x80280000
+CONFIG_SPL=y
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
@@ -50,7 +51,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x3000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_HUSH_PARSER=y
@@ -112,4 +112,3 @@ CONFIG_FSL_LPUART=y
 CONFIG_DM_THERMAL=y
 CONFIG_IMX_SCU_THERMAL=y
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/imx8ulp_evk_defconfig b/configs/imx8ulp_evk_defconfig
index c20b9048cf0..1e421d454d4 100644
--- a/configs/imx8ulp_evk_defconfig
+++ b/configs/imx8ulp_evk_defconfig
@@ -20,9 +20,9 @@ CONFIG_SPL_STACK=0x22050000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x22048000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x80480000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
-CONFIG_SYS_LOAD_ADDR=0x80480000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -45,7 +45,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x22040000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x8000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_WATCHDOG=y
 CONFIG_CMD_MEMTEST=y
diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-phyboard-segin_defconfig
index 6e9e9c5a19b..18a4087e4b2 100644
--- a/configs/imx93-phyboard-segin_defconfig
+++ b/configs/imx93-phyboard-segin_defconfig
@@ -23,11 +23,11 @@ CONFIG_SPL_STACK=0x20519dd0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x2051a000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x80400000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x720000
 CONFIG_CMD_DEKBLOB=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
-CONFIG_SYS_LOAD_ADDR=0x80400000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_REMAKE_ELF=y
@@ -45,7 +45,6 @@ CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx93_11x11_evk_defconfig b/configs/imx93_11x11_evk_defconfig
index 198d43ec9e0..a4acb771adf 100644
--- a/configs/imx93_11x11_evk_defconfig
+++ b/configs/imx93_11x11_evk_defconfig
@@ -20,9 +20,9 @@ CONFIG_SPL_STACK=0x20519dd0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x2051a000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x80400000
 CONFIG_SPL=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
-CONFIG_SYS_LOAD_ADDR=0x80400000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_REMAKE_ELF=y
@@ -43,7 +43,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imx93_var_som_defconfig b/configs/imx93_var_som_defconfig
index 14f220e8a3c..cb102f219dc 100644
--- a/configs/imx93_var_som_defconfig
+++ b/configs/imx93_var_som_defconfig
@@ -21,10 +21,10 @@ CONFIG_SPL_STACK=0x20519dd0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x2051a000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x80400000
 CONFIG_SPL=y
 CONFIG_CMD_DEKBLOB=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
-CONFIG_SYS_LOAD_ADDR=0x80400000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_REMAKE_ELF=y
@@ -46,7 +46,6 @@ CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/imxrt1020-evk_defconfig b/configs/imxrt1020-evk_defconfig
index 72bbd720153..5865d41a741 100644
--- a/configs/imxrt1020-evk_defconfig
+++ b/configs/imxrt1020-evk_defconfig
@@ -16,9 +16,9 @@ CONFIG_SPL_TEXT_BASE=0x20209000
 CONFIG_TARGET_IMXRT1020_EVK=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0x20209000
 CONFIG_SPL_SIZE_LIMIT=0x20000
 CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x20209000
 CONFIG_HAVE_SYS_UBOOT_START=y
 CONFIG_SYS_UBOOT_START=0x800023FD
 CONFIG_DISTRO_DEFAULTS=y
@@ -32,7 +32,6 @@ CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
 # CONFIG_BOOTM_NETBSD is not set
 # CONFIG_BOOTM_PLAN9 is not set
diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig
index fdbce8e6aa9..f8b85398b79 100644
--- a/configs/imxrt1050-evk_defconfig
+++ b/configs/imxrt1050-evk_defconfig
@@ -18,9 +18,9 @@ CONFIG_SPL_TEXT_BASE=0x20002000
 CONFIG_TARGET_IMXRT1050_EVK=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0x20002000
 CONFIG_SPL_SIZE_LIMIT=0x20000
 CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x20002000
 CONFIG_HAVE_SYS_UBOOT_START=y
 CONFIG_SYS_UBOOT_START=0x800023FD
 CONFIG_DISTRO_DEFAULTS=y
@@ -36,7 +36,6 @@ CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
 CONFIG_SPL_NOR_SUPPORT=y
 # CONFIG_BOOTM_NETBSD is not set
@@ -85,6 +84,5 @@ CONFIG_VIDEO_MXS=y
 CONFIG_SPLASH_SCREEN=y
 CONFIG_SPLASH_SCREEN_ALIGN=y
 CONFIG_BMP_16BPP=y
-CONFIG_SHA1=y
 CONFIG_SHA256=y
 CONFIG_HEXDUMP=y
diff --git a/configs/imxrt1050-evk_fspi_defconfig b/configs/imxrt1050-evk_fspi_defconfig
index 03543ed0a30..73001ffe161 100644
--- a/configs/imxrt1050-evk_fspi_defconfig
+++ b/configs/imxrt1050-evk_fspi_defconfig
@@ -19,9 +19,9 @@ CONFIG_SPL_TEXT_BASE=0x20002000
 CONFIG_TARGET_IMXRT1050_EVK=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0x20002000
 CONFIG_SPL_SIZE_LIMIT=0x20000
 CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x20002000
 CONFIG_HAVE_SYS_UBOOT_START=y
 CONFIG_SYS_UBOOT_START=0x800023FD
 CONFIG_DISTRO_DEFAULTS=y
@@ -37,7 +37,6 @@ CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
 CONFIG_SPL_NOR_SUPPORT=y
 # CONFIG_BOOTM_NETBSD is not set
@@ -86,7 +85,6 @@ CONFIG_VIDEO_MXS=y
 CONFIG_SPLASH_SCREEN=y
 CONFIG_SPLASH_SCREEN_ALIGN=y
 CONFIG_BMP_16BPP=y
-CONFIG_SHA1=y
 CONFIG_SHA256=y
 CONFIG_HEXDUMP=y
 CONFIG_FSPI_CONF_HEADER=y
diff --git a/configs/imxrt1170-evk_defconfig b/configs/imxrt1170-evk_defconfig
index fe0058aa5ce..5f28c22e66c 100644
--- a/configs/imxrt1170-evk_defconfig
+++ b/configs/imxrt1170-evk_defconfig
@@ -18,9 +18,9 @@ CONFIG_SPL_TEXT_BASE=0x202C0000
 CONFIG_TARGET_IMXRT1170_EVK=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0x202C0000
 CONFIG_SPL_SIZE_LIMIT=0x20000
 CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x202C0000
 CONFIG_HAVE_SYS_UBOOT_START=y
 CONFIG_SYS_UBOOT_START=0x202403FD
 CONFIG_DISTRO_DEFAULTS=y
@@ -32,7 +32,6 @@ CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
 # CONFIG_BOOTM_NETBSD is not set
 # CONFIG_BOOTM_PLAN9 is not set
diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig
index 3fa7790d77b..97ec66fba90 100644
--- a/configs/inetspace_v2_defconfig
+++ b/configs/inetspace_v2_defconfig
@@ -12,8 +12,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-is2"
-CONFIG_IDENT_STRING=" IS v2"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" IS v2"
 CONFIG_ENV_ADDR=0x70000
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
diff --git a/configs/inteno_xg6846_ram_defconfig b/configs/inteno_xg6846_ram_defconfig
index 3719bf62302..f325a07a522 100644
--- a/configs/inteno_xg6846_ram_defconfig
+++ b/configs/inteno_xg6846_ram_defconfig
@@ -6,8 +6,9 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="inteno,xg6846"
 CONFIG_DM_RESET=y
-CONFIG_IDENT_STRING="Inteno XG6846"
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x81000000
+CONFIG_IDENT_STRING="Inteno XG6846"
 CONFIG_ARCH_BMIPS=y
 CONFIG_SOC_BMIPS_BCM6328=y
 CONFIG_SYS_MIPS_TIMER_FREQ=160000000
@@ -18,7 +19,6 @@ CONFIG_MIPS_CACHE_DISABLE=y
 CONFIG_MIPS_BOOT_FDT=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_REMAKE_ELF=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_BOOTDELAY=1
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Boot XG6846 in %d seconds\n"
diff --git a/configs/iot2050_defconfig b/configs/iot2050_defconfig
index 2a7a958dec2..401e57adeca 100644
--- a/configs/iot2050_defconfig
+++ b/configs/iot2050_defconfig
@@ -33,6 +33,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_PCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_DISTRO_DEFAULTS=y
@@ -54,7 +55,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
@@ -152,4 +152,3 @@ CONFIG_USB_KEYBOARD=y
 CONFIG_WDT=y
 CONFIG_WDT_K3_RTI=y
 CONFIG_WDT_K3_RTI_LOAD_FW=y
-CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN=y
diff --git a/configs/iot_devkit_defconfig b/configs/iot_devkit_defconfig
index c4920052f82..ba275d04a11 100644
--- a/configs/iot_devkit_defconfig
+++ b/configs/iot_devkit_defconfig
@@ -11,8 +11,8 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80008000
 CONFIG_ENV_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="iot_devkit"
-CONFIG_SYS_CLK_FREQ=16000000
 CONFIG_SYS_LOAD_ADDR=0x30000000
+CONFIG_SYS_CLK_FREQ=16000000
 CONFIG_LOCALVERSION="-iotdk-1.0"
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_SYS_CBSIZE=256
diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
index 137ca3f0d02..2fbfda5cf8f 100644
--- a/configs/j7200_evm_a72_defconfig
+++ b/configs/j7200_evm_a72_defconfig
@@ -46,7 +46,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1800
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -58,7 +57,6 @@ CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
index 774a9eff439..dcb70873506 100644
--- a/configs/j7200_evm_r5_defconfig
+++ b/configs/j7200_evm_r5_defconfig
@@ -26,6 +26,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x41cf5bfc
 CONFIG_SPL_BSS_MAX_SIZE=0xa000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -33,7 +34,6 @@ CONFIG_SPL_SPI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_BOOTCOMMAND=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_MAX_SIZE=0xc0000
@@ -45,7 +45,6 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -57,7 +56,6 @@ CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/j721e_beagleboneai64_r5_defconfig b/configs/j721e_beagleboneai64_r5_defconfig
index ce96e4921b8..9662423eb70 100644
--- a/configs/j721e_beagleboneai64_r5_defconfig
+++ b/configs/j721e_beagleboneai64_r5_defconfig
@@ -23,6 +23,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x41cf59f0
 CONFIG_SPL_BSS_MAX_SIZE=0xa000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL_SIZE_LIMIT=0xf59f0
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
 CONFIG_SPL_FS_FAT=y
@@ -30,7 +31,6 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_BOOTCOMMAND=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
@@ -43,7 +43,6 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -52,7 +51,6 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_YMODEM_SUPPORT=y
diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig
index 3b4a7c3c0ee..4c2d53b3559 100644
--- a/configs/j721e_evm_r5_defconfig
+++ b/configs/j721e_evm_r5_defconfig
@@ -26,6 +26,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x41cf59f0
 CONFIG_SPL_BSS_MAX_SIZE=0xa000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL_SIZE_LIMIT=0xf59f0
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
 CONFIG_SPL_FS_FAT=y
@@ -35,7 +36,6 @@ CONFIG_SPL_SPI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 # CONFIG_DISPLAY_CPUINFO is not set
@@ -50,7 +50,6 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -62,7 +61,6 @@ CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/j721s2_evm_a72_defconfig b/configs/j721s2_evm_a72_defconfig
index d78ebb5cfd4..769c6099dbe 100644
--- a/configs/j721s2_evm_a72_defconfig
+++ b/configs/j721s2_evm_a72_defconfig
@@ -44,7 +44,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -56,7 +55,6 @@ CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig
index b6adb6a77d7..eeb38af36ff 100644
--- a/configs/j721s2_evm_r5_defconfig
+++ b/configs/j721s2_evm_r5_defconfig
@@ -26,6 +26,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x41c76000
 CONFIG_SPL_BSS_MAX_SIZE=0xa000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL_SIZE_LIMIT=0x80000
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
 CONFIG_SPL_FS_FAT=y
@@ -35,7 +36,6 @@ CONFIG_SPL_SPI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_BOOTCOMMAND=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
@@ -51,7 +51,6 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -63,7 +62,6 @@ CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/j722s_evm_a53_defconfig b/configs/j722s_evm_a53_defconfig
index 98620222a07..1fdfdb53117 100644
--- a/configs/j722s_evm_a53_defconfig
+++ b/configs/j722s_evm_a53_defconfig
@@ -38,7 +38,6 @@ CONFIG_SPL_MAX_SIZE=0x58000
 CONFIG_SPL_PAD_TO=0x0
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -47,7 +46,6 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
diff --git a/configs/j722s_evm_r5_defconfig b/configs/j722s_evm_r5_defconfig
index e574be9e19d..74fbe52e588 100644
--- a/configs/j722s_evm_r5_defconfig
+++ b/configs/j722s_evm_r5_defconfig
@@ -41,14 +41,12 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/j784s4_evm_r5_defconfig b/configs/j784s4_evm_r5_defconfig
index a1168819497..2281517f22b 100644
--- a/configs/j784s4_evm_r5_defconfig
+++ b/configs/j784s4_evm_r5_defconfig
@@ -26,6 +26,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x41c76000
 CONFIG_SPL_BSS_MAX_SIZE=0xa000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL_SIZE_LIMIT=0x80000
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
 CONFIG_SPL_FS_FAT=y
@@ -34,7 +35,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
@@ -45,7 +45,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -55,7 +54,6 @@ CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/jaguar-rk3588_defconfig b/configs/jaguar-rk3588_defconfig
index 18006467dde..6e853991d1d 100644
--- a/configs/jaguar-rk3588_defconfig
+++ b/configs/jaguar-rk3588_defconfig
@@ -10,9 +10,10 @@ CONFIG_ROCKCHIP_RK3588=y
 CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_JAGUAR_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=5
 CONFIG_DEBUG_UART_BASE=0xfeb50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
@@ -85,7 +86,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
 # CONFIG_SPI_FLASH is not set
-CONFIG_SF_DEFAULT_BUS=5
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DWC_ETH_QOS=y
diff --git a/configs/jethub_j100_defconfig b/configs/jethub_j100_defconfig
index 9de6b4b44d9..b5deb9d1c19 100644
--- a/configs/jethub_j100_defconfig
+++ b/configs/jethub_j100_defconfig
@@ -12,10 +12,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-axg-jethome-jethub-j100"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_AXG=y
+CONFIG_SYS_LOAD_ADDR=0x01000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" jethubj100"
-CONFIG_SYS_LOAD_ADDR=0x01000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/jethub_j80_defconfig b/configs/jethub_j80_defconfig
index 85306872f9a..89fcefb6ec6 100644
--- a/configs/jethub_j80_defconfig
+++ b/configs/jethub_j80_defconfig
@@ -12,10 +12,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905w-jethome-jethub-j80"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXL=y
+CONFIG_SYS_LOAD_ADDR=0x01000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" jethubj80"
-CONFIG_SYS_LOAD_ADDR=0x01000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig
index b8a73840997..c13edd88b1d 100644
--- a/configs/jetson-tk1_defconfig
+++ b/configs/jetson-tk1_defconfig
@@ -11,11 +11,11 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra124-jetson-tk1"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA124=y
 CONFIG_TARGET_JETSON_TK1=y
 CONFIG_TEGRA_ENABLE_UARTD=y
 CONFIG_TEGRA_GPU=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_PCI=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2089
diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig
index f201a175727..b87defbf575 100644
--- a/configs/k2e_evm_defconfig
+++ b/configs/k2e_evm_defconfig
@@ -59,6 +59,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -99,4 +100,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
-CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig
index 46501d59e09..6b771dfb061 100644
--- a/configs/k2e_hs_evm_defconfig
+++ b/configs/k2e_hs_evm_defconfig
@@ -34,6 +34,7 @@ CONFIG_BOOTP_DNS2=y
 CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -73,4 +74,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
-CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig
index 57a3d362a1b..740a4366271 100644
--- a/configs/k2g_evm_defconfig
+++ b/configs/k2g_evm_defconfig
@@ -24,6 +24,7 @@ CONFIG_SPL_STACK=0xc0c23f4
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0xc0afff8
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
@@ -57,6 +58,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_OF_LIST="ti/keystone/keystone-k2g-evm ti/keystone/keystone-k2g-ice"
 CONFIG_DTB_RESELECT=y
 CONFIG_MULTI_DTB_FIT=y
@@ -77,7 +79,6 @@ CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
@@ -109,4 +110,3 @@ CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_FUNCTION_SDP=y
-CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2g_hs_evm_defconfig b/configs/k2g_hs_evm_defconfig
index 392ec5b2a05..af9316f753a 100644
--- a/configs/k2g_hs_evm_defconfig
+++ b/configs/k2g_hs_evm_defconfig
@@ -15,6 +15,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc09ff10
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_ENV_SIZE=0x40000
 CONFIG_DEFAULT_DEVICE_TREE="ti/keystone/keystone-k2g-evm"
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_TIMESTAMP=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
@@ -33,6 +34,7 @@ CONFIG_BOOTP_DNS2=y
 CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_OF_LIST="ti/keystone/keystone-k2g-evm ti/keystone/keystone-k2g-ice"
 CONFIG_DTB_RESELECT=y
 CONFIG_MULTI_DTB_FIT=y
@@ -53,7 +55,6 @@ CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
@@ -84,4 +85,3 @@ CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_FUNCTION_SDP=y
-CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig
index 2e29b2f2aeb..782cb1d5790 100644
--- a/configs/k2hk_evm_defconfig
+++ b/configs/k2hk_evm_defconfig
@@ -59,6 +59,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -100,4 +101,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
-CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig
index cf299f2457c..0e43ca1f861 100644
--- a/configs/k2hk_hs_evm_defconfig
+++ b/configs/k2hk_hs_evm_defconfig
@@ -34,6 +34,7 @@ CONFIG_BOOTP_DNS2=y
 CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -74,4 +75,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
-CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig
index 0cadece4b02..3a87e48a96b 100644
--- a/configs/k2l_evm_defconfig
+++ b/configs/k2l_evm_defconfig
@@ -59,6 +59,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -100,4 +101,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
-CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2l_hs_evm_defconfig b/configs/k2l_hs_evm_defconfig
index 5496049d3a3..4f71a208d8d 100644
--- a/configs/k2l_hs_evm_defconfig
+++ b/configs/k2l_hs_evm_defconfig
@@ -37,6 +37,7 @@ CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
 CONFIG_EFI_PARTITION=y
 CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -78,4 +79,3 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_UPSTREAM=y
diff --git a/configs/khadas-edge-captain-rk3399_defconfig b/configs/khadas-edge-captain-rk3399_defconfig
index 60d4770cb0e..89611a0535e 100644
--- a/configs/khadas-edge-captain-rk3399_defconfig
+++ b/configs/khadas-edge-captain-rk3399_defconfig
@@ -10,11 +10,12 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge-captain.dtb"
@@ -50,7 +51,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_REALTEK=y
diff --git a/configs/khadas-edge-rk3399_defconfig b/configs/khadas-edge-rk3399_defconfig
index 1321ca1ea59..3816f4327a6 100644
--- a/configs/khadas-edge-rk3399_defconfig
+++ b/configs/khadas-edge-rk3399_defconfig
@@ -10,11 +10,12 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge.dtb"
 CONFIG_SYS_PBSIZE=1048
@@ -48,7 +49,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
diff --git a/configs/khadas-edge-v-rk3399_defconfig b/configs/khadas-edge-v-rk3399_defconfig
index 3898142c5c7..35e20942572 100644
--- a/configs/khadas-edge-v-rk3399_defconfig
+++ b/configs/khadas-edge-v-rk3399_defconfig
@@ -10,11 +10,12 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge-v.dtb"
@@ -50,7 +51,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_REALTEK=y
diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig
index 50f8b306505..59491c4d29f 100644
--- a/configs/khadas-vim2_defconfig
+++ b/configs/khadas-vim2_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxm-khadas-vim2"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXM=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" khadas-vim2"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/khadas-vim3_android_ab_defconfig b/configs/khadas-vim3_android_ab_defconfig
index 37b8d6a9256..510fe4f8928 100644
--- a/configs/khadas-vim3_android_ab_defconfig
+++ b/configs/khadas-vim3_android_ab_defconfig
@@ -14,10 +14,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-a311d-khadas-vim3"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" khadas-vim3"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
diff --git a/configs/khadas-vim3_android_defconfig b/configs/khadas-vim3_android_defconfig
index 55d59dd4813..a0d9c423c3c 100644
--- a/configs/khadas-vim3_android_defconfig
+++ b/configs/khadas-vim3_android_defconfig
@@ -14,10 +14,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-a311d-khadas-vim3"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" khadas-vim3"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
diff --git a/configs/khadas-vim3_defconfig b/configs/khadas-vim3_defconfig
index 32579b8ac36..7cc31efb752 100644
--- a/configs/khadas-vim3_defconfig
+++ b/configs/khadas-vim3_defconfig
@@ -11,10 +11,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-a311d-khadas-vim3"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" khadas-vim3"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
diff --git a/configs/khadas-vim3l_android_ab_defconfig b/configs/khadas-vim3l_android_ab_defconfig
index 95e70275cc4..d2da8ff2a69 100644
--- a/configs/khadas-vim3l_android_ab_defconfig
+++ b/configs/khadas-vim3l_android_ab_defconfig
@@ -14,10 +14,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-khadas-vim3l"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" khadas-vim3l"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
diff --git a/configs/khadas-vim3l_android_defconfig b/configs/khadas-vim3l_android_defconfig
index 6372d119894..4ec27262cdc 100644
--- a/configs/khadas-vim3l_android_defconfig
+++ b/configs/khadas-vim3l_android_defconfig
@@ -14,10 +14,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-khadas-vim3l"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" khadas-vim3l"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
diff --git a/configs/khadas-vim3l_defconfig b/configs/khadas-vim3l_defconfig
index b9f4690045a..5aa08c41df8 100644
--- a/configs/khadas-vim3l_defconfig
+++ b/configs/khadas-vim3l_defconfig
@@ -11,10 +11,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-khadas-vim3l"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" khadas-vim3l"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig
index ac00e8975e1..775c24f7ddc 100644
--- a/configs/khadas-vim_defconfig
+++ b/configs/khadas-vim_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905x-khadas-vim"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXL=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" khadas-vim"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/kmcent2_defconfig b/configs/kmcent2_defconfig
index 61a3ae23554..a50822e0906 100644
--- a/configs/kmcent2_defconfig
+++ b/configs/kmcent2_defconfig
@@ -111,4 +111,3 @@ CONFIG_BCH=y
 CONFIG_PANIC_HANG=y
 CONFIG_LZO=y
 CONFIG_POST=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig
index 99ed7171694..a9ed1ba1360 100644
--- a/configs/kmcoge5ne_defconfig
+++ b/configs/kmcoge5ne_defconfig
@@ -6,8 +6,9 @@ CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="kmcoge5ne"
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_CLK_FREQ=66000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SYS_CLK_FREQ=66000000
 CONFIG_ENV_ADDR=0xF00C0000
 CONFIG_MPC83xx=y
 CONFIG_HIGH_BATS=y
@@ -122,7 +123,6 @@ CONFIG_LCRR_EADC_2=y
 CONFIG_LCRR_CLKDIV_4=y
 CONFIG_83XX_PCICLK=0x3ef1480
 # CONFIG_PCI is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
@@ -202,4 +202,3 @@ CONFIG_QE=y
 CONFIG_SYS_NS16550=y
 CONFIG_BCH=y
 CONFIG_POST=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig
index 506a036bd49..1d3c757e220 100644
--- a/configs/kmeter1_defconfig
+++ b/configs/kmeter1_defconfig
@@ -7,8 +7,9 @@ CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="kmeter1"
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_CLK_FREQ=66000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SYS_CLK_FREQ=66000000
 CONFIG_ENV_ADDR=0xF00C0000
 CONFIG_MPC83xx=y
 CONFIG_HIGH_BATS=y
@@ -102,7 +103,6 @@ CONFIG_LCRR_DBYP_PLL_BYPASSED=y
 CONFIG_LCRR_EADC_2=y
 CONFIG_LCRR_CLKDIV_4=y
 # CONFIG_PCI is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
@@ -173,4 +173,3 @@ CONFIG_DM_ETH_PHY=y
 CONFIG_QE_UEC=y
 CONFIG_QE=y
 CONFIG_SYS_NS16550=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig
index 0708067694d..b036ede6c49 100644
--- a/configs/kmopti2_defconfig
+++ b/configs/kmopti2_defconfig
@@ -6,8 +6,9 @@ CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="kmopti2"
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_CLK_FREQ=66000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SYS_CLK_FREQ=66000000
 CONFIG_ENV_ADDR=0xF00C0000
 CONFIG_MPC83xx=y
 CONFIG_HIGH_BATS=y
@@ -110,7 +111,6 @@ CONFIG_LCRR_EADC_1=y
 CONFIG_LCRR_CLKDIV_2=y
 CONFIG_83XX_PCICLK=0x3ef1480
 # CONFIG_PCI is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
@@ -183,4 +183,3 @@ CONFIG_QE_UEC=y
 # CONFIG_PINCTRL_FULL is not set
 CONFIG_QE=y
 CONFIG_SYS_NS16550=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig
index d241f72fd40..a6741b4e8fc 100644
--- a/configs/kmsupx5_defconfig
+++ b/configs/kmsupx5_defconfig
@@ -6,8 +6,9 @@ CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="kmsupm5"
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_CLK_FREQ=66000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SYS_CLK_FREQ=66000000
 CONFIG_ENV_ADDR=0xF00C0000
 CONFIG_MPC83xx=y
 CONFIG_HIGH_BATS=y
@@ -96,7 +97,6 @@ CONFIG_LCRR_EADC_1=y
 CONFIG_LCRR_CLKDIV_2=y
 CONFIG_83XX_PCICLK=0x3ef1480
 # CONFIG_PCI is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
@@ -166,4 +166,3 @@ CONFIG_QE_UEC=y
 # CONFIG_PINCTRL_FULL is not set
 CONFIG_QE=y
 CONFIG_SYS_NS16550=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig
index 26480b73cf6..c8bfc9943b1 100644
--- a/configs/kmtepr2_defconfig
+++ b/configs/kmtepr2_defconfig
@@ -6,8 +6,9 @@ CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="kmtepr2"
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_CLK_FREQ=66000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SYS_CLK_FREQ=66000000
 CONFIG_ENV_ADDR=0xF00C0000
 CONFIG_MPC83xx=y
 CONFIG_HIGH_BATS=y
@@ -110,7 +111,6 @@ CONFIG_LCRR_EADC_1=y
 CONFIG_LCRR_CLKDIV_2=y
 CONFIG_83XX_PCICLK=0x3ef1480
 # CONFIG_PCI is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
@@ -182,4 +182,3 @@ CONFIG_QE_UEC=y
 # CONFIG_PINCTRL_FULL is not set
 CONFIG_QE=y
 CONFIG_SYS_NS16550=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/koelsch_defconfig b/configs/koelsch_defconfig
index a912e58cf4d..f5deacf8e78 100644
--- a/configs/koelsch_defconfig
+++ b/configs/koelsch_defconfig
@@ -25,12 +25,13 @@ CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0xe6340000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_ENV_ADDR=0xC0000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CBSIZE=256
@@ -40,7 +41,6 @@ CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000
@@ -105,4 +105,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/kontron-sl-mx6ul_defconfig b/configs/kontron-sl-mx6ul_defconfig
index f295ecfe4b7..0ca7d33da10 100644
--- a/configs/kontron-sl-mx6ul_defconfig
+++ b/configs/kontron-sl-mx6ul_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
@@ -74,7 +75,6 @@ CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_MTD_SPI_NAND=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_MTD=y
diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig
index d85a4335c63..baefb27e20e 100644
--- a/configs/kontron-sl-mx8mm_defconfig
+++ b/configs/kontron-sl-mx8mm_defconfig
@@ -23,12 +23,16 @@ CONFIG_SPL_STACK=0x91fff0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x1F0000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x42000000
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
@@ -45,7 +49,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_SPI_FLASH=y
@@ -146,7 +149,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 # CONFIG_WATCHDOG_AUTOSTART is not set
 CONFIG_IMX_WATCHDOG=y
 # CONFIG_HEXDUMP is not set
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
diff --git a/configs/kontron_pitx_imx8m_defconfig b/configs/kontron_pitx_imx8m_defconfig
index 52238831229..f155c94dd5f 100644
--- a/configs/kontron_pitx_imx8m_defconfig
+++ b/configs/kontron_pitx_imx8m_defconfig
@@ -23,14 +23,17 @@ CONFIG_SPL_STACK=0x187ff0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x180000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_REMAKE_ELF=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
 CONFIG_FIT=y
 CONFIG_SPL_FIT_PRINT=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_CBSIZE=256
@@ -45,7 +48,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
@@ -111,6 +113,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 # CONFIG_RANDOM_UUID is not set
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig
index c4493e50a32..7073553588a 100644
--- a/configs/kontron_sl28_defconfig
+++ b/configs/kontron_sl28_defconfig
@@ -22,6 +22,8 @@ CONFIG_SPL_STACK=0x18009ff0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80100000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_SPL_SIZE_LIMIT=0x20000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f0000
@@ -30,13 +32,14 @@ CONFIG_SPL_SPI=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_ARMV8_PSCI=y
 CONFIG_ARMV8_PSCI_RELOCATE=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_AHCI=y
 CONFIG_SYS_FSL_NUM_CC_PLLS=3
 CONFIG_MP=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
@@ -52,7 +55,6 @@ CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x900
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_SPI_LOAD=y
@@ -129,6 +131,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_WDT=y
 CONFIG_WDT_SL28CPLD=y
 CONFIG_WDT_SP805=y
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
diff --git a/configs/kp_imx53_defconfig b/configs/kp_imx53_defconfig
index 49ad9d40462..25edee32462 100644
--- a/configs/kp_imx53_defconfig
+++ b/configs/kp_imx53_defconfig
@@ -7,9 +7,10 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_TARGET_KP_IMX53=y
 CONFIG_DEFAULT_DEVICE_TREE="imx53-kp"
+CONFIG_SYS_LOAD_ADDR=0x72000000
 CONFIG_ENV_OFFSET_REDUND=0x102000
 # CONFIG_CMD_BMODE is not set
-CONFIG_SYS_LOAD_ADDR=0x72000000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_SHOW_BOOT_PROGRESS=y
@@ -62,4 +63,3 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_MX5=y
 CONFIG_USB_STORAGE=y
 CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/kstr_sama5d27_defconfig b/configs/kstr_sama5d27_defconfig
index 9577d7374bf..9f6c8d8e231 100644
--- a/configs/kstr_sama5d27_defconfig
+++ b/configs/kstr_sama5d27_defconfig
@@ -11,6 +11,7 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SYS_LOAD_ADDR=0x24000000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SD_BOOT=y
@@ -69,4 +70,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x16c0
 CONFIG_USB_GADGET_PRODUCT_NUM=0x03e9
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/kylin-rk3036_defconfig b/configs/kylin-rk3036_defconfig
index b9b50e8c23a..6a402ac2543 100644
--- a/configs/kylin-rk3036_defconfig
+++ b/configs/kylin-rk3036_defconfig
@@ -19,9 +19,9 @@ CONFIG_TARGET_KYLIN_RK3036=y
 CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0x10081fff
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_LOAD_ADDR=0x60800800
 CONFIG_DEBUG_UART_BASE=0x20068000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x60800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_USE_PREBOOT=y
diff --git a/configs/lager_defconfig b/configs/lager_defconfig
index 03f29b8849b..920d026fbe1 100644
--- a/configs/lager_defconfig
+++ b/configs/lager_defconfig
@@ -25,12 +25,13 @@ CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0xe6340000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_ENV_ADDR=0xC0000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CBSIZE=256
@@ -40,7 +41,6 @@ CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000
@@ -107,4 +107,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/leez-rk3399_defconfig b/configs/leez-rk3399_defconfig
index ea96e1ef758..57b097377fa 100644
--- a/configs/leez-rk3399_defconfig
+++ b/configs/leez-rk3399_defconfig
@@ -8,9 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-leez-p710"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-leez-p710.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/librem5_defconfig b/configs/librem5_defconfig
index 248fc1fdde4..ad49889ffc4 100644
--- a/configs/librem5_defconfig
+++ b/configs/librem5_defconfig
@@ -23,9 +23,9 @@ CONFIG_SPL_STACK=0x187ff0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x180000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
@@ -47,7 +47,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/libretech-ac_defconfig b/configs/libretech-ac_defconfig
index 6ad04570022..f6ee4c50e5f 100644
--- a/configs/libretech-ac_defconfig
+++ b/configs/libretech-ac_defconfig
@@ -13,10 +13,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s805x-libretech-ac"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXL=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" libretech-ac"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig
index beb919ca6e8..221f5d52b49 100644
--- a/configs/libretech-cc_defconfig
+++ b/configs/libretech-cc_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905x-libretech-cc"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXL=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" libretech-cc"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/libretech-cc_v2_defconfig b/configs/libretech-cc_v2_defconfig
index 6859dfd517c..d27886f3ec1 100644
--- a/configs/libretech-cc_v2_defconfig
+++ b/configs/libretech-cc_v2_defconfig
@@ -12,10 +12,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905x-libretech-cc-v2"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXL=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" libretech-cc-v2"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig
index 0adc0afdf30..12a2f697cbd 100644
--- a/configs/libretech-s905d-pc_defconfig
+++ b/configs/libretech-s905d-pc_defconfig
@@ -13,10 +13,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905d-libretech-pc"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXL=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" libretech-s905d-pc"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig
index cbce0cf4000..9f6749c6f0f 100644
--- a/configs/libretech-s912-pc_defconfig
+++ b/configs/libretech-s912-pc_defconfig
@@ -12,10 +12,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxm-s912-libretech-pc"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXM=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" libretech-s912-pc"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/linkit-smart-7688_defconfig b/configs/linkit-smart-7688_defconfig
index 69494f5e405..d70af3f8b33 100644
--- a/configs/linkit-smart-7688_defconfig
+++ b/configs/linkit-smart-7688_defconfig
@@ -12,8 +12,8 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
 CONFIG_SPL_BSS_START_ADDR=0x80010000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x80100000
+CONFIG_SPL=y
 CONFIG_ARCH_MTMIPS=y
 CONFIG_SOC_MT7628=y
 CONFIG_BOARD_LINKIT_SMART_7688=y
diff --git a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
index 50a1e24921c..8dc27474200 100644
--- a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
@@ -10,6 +10,7 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds"
 CONFIG_QSPI_AHB_INIT=y
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_PCI=y
@@ -59,7 +60,6 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=1
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/ls1012aqds_tfa_defconfig b/configs/ls1012aqds_tfa_defconfig
index 611b572e6ad..26cddb55e3d 100644
--- a/configs/ls1012aqds_tfa_defconfig
+++ b/configs/ls1012aqds_tfa_defconfig
@@ -12,6 +12,7 @@ CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds"
 CONFIG_QSPI_AHB_INIT=y
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_PCI=y
@@ -68,7 +69,6 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=1
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/ls1021aiot_sdcard_defconfig b/configs/ls1021aiot_sdcard_defconfig
index 981093a9fb5..46a2531eafb 100644
--- a/configs/ls1021aiot_sdcard_defconfig
+++ b/configs/ls1021aiot_sdcard_defconfig
@@ -21,8 +21,8 @@ CONFIG_SPL_STACK=0x1001d000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80100000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_SPL=y
 CONFIG_PCI=y
 CONFIG_AHCI=y
 # CONFIG_DEEP_SLEEP is not set
@@ -50,7 +50,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x82080000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig
index f372cc491ee..16968e1d3d8 100644
--- a/configs/ls1021aqds_ddr4_nor_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_defconfig
@@ -12,6 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_ENV_ADDR=0x60300000
 CONFIG_PCI=y
@@ -27,7 +28,6 @@ CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index 87cb398d1cb..5b3e65c310e 100644
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -12,6 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_ENV_ADDR=0x60300000
 CONFIG_PCI=y
@@ -27,7 +28,6 @@ CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig
index 4fc0e66e485..e47b5da6ac0 100644
--- a/configs/ls1021aqds_nand_defconfig
+++ b/configs/ls1021aqds_nand_defconfig
@@ -23,8 +23,9 @@ CONFIG_SPL_STACK=0x1001d000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80100000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_SPL=y
 CONFIG_PCI=y
 CONFIG_AHCI=y
 CONFIG_LAYERSCAPE_NS_ACCESS=y
@@ -38,7 +39,6 @@ CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021aqds/ls102xa_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg"
@@ -60,9 +60,6 @@ CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80200000
-CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
index 2b9679d2d21..29141097b75 100644
--- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
@@ -11,6 +11,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_PCI=y
 CONFIG_AHCI=y
@@ -27,7 +28,6 @@ CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig
index ec1c6ddc2ef..651e59a0b5a 100644
--- a/configs/ls1021aqds_nor_defconfig
+++ b/configs/ls1021aqds_nor_defconfig
@@ -12,6 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_ENV_ADDR=0x60300000
 CONFIG_PCI=y
@@ -27,7 +28,6 @@ CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index 9f3e5f2fa63..48bfa53a167 100644
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -12,6 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_ENV_ADDR=0x60300000
 CONFIG_PCI=y
@@ -27,7 +28,6 @@ CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig
index 83f07436099..ec27ad3c7a7 100644
--- a/configs/ls1021aqds_qspi_defconfig
+++ b/configs/ls1021aqds_qspi_defconfig
@@ -13,6 +13,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_PCI=y
 CONFIG_AHCI=y
@@ -25,7 +26,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig
index 72632b87701..54c4bd2bfa8 100644
--- a/configs/ls1021aqds_sdcard_ifc_defconfig
+++ b/configs/ls1021aqds_sdcard_ifc_defconfig
@@ -24,8 +24,9 @@ CONFIG_SPL_STACK=0x1001d000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80100000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_SPL=y
 CONFIG_PCI=y
 CONFIG_AHCI=y
 CONFIG_LAYERSCAPE_NS_ACCESS=y
@@ -39,7 +40,6 @@ CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021aqds/ls102xa_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg"
@@ -60,7 +60,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x820c0000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig
index 78dce4dcbba..9dbd83a66c6 100644
--- a/configs/ls1021aqds_sdcard_qspi_defconfig
+++ b/configs/ls1021aqds_sdcard_qspi_defconfig
@@ -24,8 +24,9 @@ CONFIG_SPL_STACK=0x1001d000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80100000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_SPL=y
 CONFIG_PCI=y
 CONFIG_AHCI=y
 CONFIG_LAYERSCAPE_NS_ACCESS=y
@@ -37,7 +38,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021aqds/ls102xa_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg"
@@ -59,7 +59,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x820c0000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
diff --git a/configs/ls1021atsn_qspi_defconfig b/configs/ls1021atsn_qspi_defconfig
index 14bc9c86312..1c7f25ebc6d 100644
--- a/configs/ls1021atsn_qspi_defconfig
+++ b/configs/ls1021atsn_qspi_defconfig
@@ -12,6 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-tsn"
+CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_PCI=y
 CONFIG_AHCI=y
@@ -19,7 +20,6 @@ CONFIG_LAYERSCAPE_NS_ACCESS=y
 CONFIG_PCIE1=y
 CONFIG_PCIE2=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/ls1021atsn_sdcard_defconfig b/configs/ls1021atsn_sdcard_defconfig
index 0853bfbd3a0..a42122a53e6 100644
--- a/configs/ls1021atsn_sdcard_defconfig
+++ b/configs/ls1021atsn_sdcard_defconfig
@@ -21,15 +21,15 @@ CONFIG_SPL_STACK=0x1001d000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80100000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_SPL=y
 CONFIG_PCI=y
 CONFIG_AHCI=y
 CONFIG_LAYERSCAPE_NS_ACCESS=y
 CONFIG_PCIE1=y
 CONFIG_PCIE2=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021atsn/ls102xa_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg"
@@ -53,7 +53,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x82100000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
index a9c82d1f4d3..89c02fe1fd3 100644
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
@@ -11,6 +11,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_PCI=y
 CONFIG_AHCI=y
@@ -23,7 +24,6 @@ CONFIG_SYS_MEMTEST_END=0x9fffffff
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
index e4b53d38ba0..0cd6b7c7809 100644
--- a/configs/ls1021atwr_nor_defconfig
+++ b/configs/ls1021atwr_nor_defconfig
@@ -12,6 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_ENV_ADDR=0x60300000
 CONFIG_PCI=y
@@ -23,7 +24,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index 6d33ffdfb94..4e894badbc9 100644
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -12,6 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-lpuart"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_ENV_ADDR=0x60300000
 CONFIG_PCI=y
@@ -23,7 +24,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_OF_BOARD_SETUP=y
diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig
index 444fdaede07..a3fd4ac9baa 100644
--- a/configs/ls1021atwr_qspi_defconfig
+++ b/configs/ls1021atwr_qspi_defconfig
@@ -13,6 +13,7 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_PCI=y
 CONFIG_AHCI=y
@@ -23,7 +24,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
index 28434d8e191..021c2b11cde 100644
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -23,8 +23,9 @@ CONFIG_SPL_STACK=0x1001d000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80100000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_SPL=y
 CONFIG_PCI=y
 CONFIG_NXP_ESBC=y
 CONFIG_LAYERSCAPE_NS_ACCESS=y
@@ -34,7 +35,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021atwr/ls102xa_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg"
@@ -61,7 +61,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x82104000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig
index b4348f12678..4924a6a477a 100644
--- a/configs/ls1021atwr_sdcard_ifc_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_defconfig
@@ -23,8 +23,9 @@ CONFIG_SPL_STACK=0x1001d000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80100000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_SPL=y
 CONFIG_PCI=y
 CONFIG_AHCI=y
 CONFIG_LAYERSCAPE_NS_ACCESS=y
@@ -34,7 +35,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021atwr/ls102xa_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg"
@@ -62,7 +62,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x82100000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig
index 8d2c391f0e8..146ebf44be6 100644
--- a/configs/ls1021atwr_sdcard_qspi_defconfig
+++ b/configs/ls1021atwr_sdcard_qspi_defconfig
@@ -23,8 +23,9 @@ CONFIG_SPL_STACK=0x1001d000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80100000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_SPL=y
 CONFIG_PCI=y
 CONFIG_AHCI=y
 CONFIG_LAYERSCAPE_NS_ACCESS=y
@@ -34,7 +35,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021atwr/ls102xa_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg"
@@ -63,7 +63,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x82100000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
index 3c70918af4a..d9c25266261 100644
--- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
@@ -23,6 +23,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
@@ -97,4 +98,3 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
 CONFIG_RSA=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig
index 6049d9e612f..fcf569514c6 100644
--- a/configs/ls1028aqds_tfa_defconfig
+++ b/configs/ls1028aqds_tfa_defconfig
@@ -25,6 +25,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
@@ -102,4 +103,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig
index b8a8e4c3fb5..78ad887e245 100644
--- a/configs/ls1028aqds_tfa_lpuart_defconfig
+++ b/configs/ls1028aqds_tfa_lpuart_defconfig
@@ -24,6 +24,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
@@ -102,4 +103,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
index 1a3a322c390..adcae632315 100644
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@@ -23,6 +23,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
@@ -91,4 +92,3 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
 CONFIG_RSA=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index 39887524838..17230d0d97e 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -25,6 +25,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
@@ -100,4 +101,3 @@ CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
index 9c77eae660c..1cbab056fd4 100644
--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
@@ -12,6 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_PCI=y
@@ -82,7 +83,6 @@ CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SF_DEFAULT_BUS=1
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig
index 711ecfc98f8..f124098b7bf 100644
--- a/configs/ls1043aqds_tfa_defconfig
+++ b/configs/ls1043aqds_tfa_defconfig
@@ -14,6 +14,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_ENV_ADDR=0x60500000
@@ -91,7 +92,6 @@ CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SF_DEFAULT_BUS=1
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
index 3ffa2cbf52e..1b41fe608da 100644
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@@ -12,6 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_PCI=y
@@ -23,6 +24,7 @@ CONFIG_PCIE2=y
 CONFIG_PCIE3=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
@@ -68,7 +70,6 @@ CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
@@ -93,4 +94,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig
index 5d0401df5b8..ca100bd4bca 100644
--- a/configs/ls1043ardb_tfa_defconfig
+++ b/configs/ls1043ardb_tfa_defconfig
@@ -14,6 +14,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_ENV_ADDR=0x60500000
@@ -25,6 +26,7 @@ CONFIG_PCIE2=y
 CONFIG_PCIE3=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
@@ -74,7 +76,6 @@ CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
@@ -97,4 +98,3 @@ CONFIG_DM_SPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
index 922b51997a6..f7b44f64dd4 100644
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@@ -12,6 +12,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_PCI=y
@@ -83,7 +84,6 @@ CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig
index 31eea32e777..2efc17b9e43 100644
--- a/configs/ls1046aqds_tfa_defconfig
+++ b/configs/ls1046aqds_tfa_defconfig
@@ -14,6 +14,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_ENV_ADDR=0x60500000
@@ -92,7 +93,6 @@ CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SF_DEFAULT_BUS=1
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
index be61b962d6f..6b4e834ad4a 100644
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -24,6 +24,7 @@ CONFIG_PCIE2=y
 CONFIG_PCIE3=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
@@ -87,4 +88,3 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig
index c6568a9d030..a8f20f9b87b 100644
--- a/configs/ls1046ardb_tfa_defconfig
+++ b/configs/ls1046ardb_tfa_defconfig
@@ -26,6 +26,7 @@ CONFIG_PCIE2=y
 CONFIG_PCIE3=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
@@ -92,4 +93,3 @@ CONFIG_FSL_QSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig
index 56d7828575f..df86bf982ee 100644
--- a/configs/ls1088aqds_tfa_defconfig
+++ b/configs/ls1088aqds_tfa_defconfig
@@ -29,6 +29,7 @@ CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
@@ -127,4 +128,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_GADGET=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
index fc7c94da280..df472eeb404 100644
--- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
@@ -101,4 +102,3 @@ CONFIG_USB_DWC3=y
 CONFIG_USB_GADGET=y
 CONFIG_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig
index 84ff788e269..8d640f6594b 100644
--- a/configs/ls1088ardb_tfa_defconfig
+++ b/configs/ls1088ardb_tfa_defconfig
@@ -28,6 +28,7 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
@@ -109,4 +110,3 @@ CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_GADGET=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls2088aqds_tfa_defconfig b/configs/ls2088aqds_tfa_defconfig
index 9e4e288a0f9..8c86b8b11eb 100644
--- a/configs/ls2088aqds_tfa_defconfig
+++ b/configs/ls2088aqds_tfa_defconfig
@@ -23,6 +23,7 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
@@ -119,4 +120,3 @@ CONFIG_FSL_DSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
index 42853b8fd87..3fd1de96789 100644
--- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
@@ -27,6 +27,7 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
@@ -111,4 +112,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig
index 912781126e8..f053044fa56 100644
--- a/configs/ls2088ardb_tfa_defconfig
+++ b/configs/ls2088ardb_tfa_defconfig
@@ -29,6 +29,7 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
@@ -117,4 +118,3 @@ CONFIG_FSL_QSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig
index ad060079a77..521a925bf88 100644
--- a/configs/lschlv2_defconfig
+++ b/configs/lschlv2_defconfig
@@ -16,8 +16,8 @@ CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-lschlv2"
-CONFIG_IDENT_STRING=" LS-CHLv2"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" LS-CHLv2"
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=393216
 # CONFIG_BOOTSTD is not set
diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig
index b2d9f0c9d8a..18727745c29 100644
--- a/configs/lsxhl_defconfig
+++ b/configs/lsxhl_defconfig
@@ -17,8 +17,8 @@ CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-lsxhl"
-CONFIG_IDENT_STRING=" LS-XHL"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" LS-XHL"
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=393216
 # CONFIG_BOOTSTD is not set
diff --git a/configs/lubancat-2-rk3568_defconfig b/configs/lubancat-2-rk3568_defconfig
index 88593bfa705..46cc3c03fff 100644
--- a/configs/lubancat-2-rk3568_defconfig
+++ b/configs/lubancat-2-rk3568_defconfig
@@ -5,10 +5,11 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-lubancat-2"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
+CONFIG_EFI_VAR_BUF_SIZE=16384
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_FIT_SIGNATURE=y
@@ -71,4 +72,3 @@ CONFIG_USB_OHCI_GENERIC=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
 CONFIG_ERRNO_STR=y
-CONFIG_EFI_VAR_BUF_SIZE=16384
diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
index 77a605b5a90..321ed71993b 100644
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -28,6 +28,7 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -107,4 +108,3 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig
index b92010091a3..465f07ee7f8 100644
--- a/configs/lx2160aqds_tfa_defconfig
+++ b/configs/lx2160aqds_tfa_defconfig
@@ -30,6 +30,7 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
@@ -114,4 +115,3 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_WDT=y
 CONFIG_WDT_SBSA=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index 9fbfa221029..478a01b566c 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -29,6 +29,7 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -97,4 +98,3 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index af6d0a98098..8fd18825569 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -31,6 +31,7 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
@@ -108,4 +109,3 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_WDT=y
 CONFIG_WDT_SBSA=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/lx2160ardb_tfa_stmm_defconfig b/configs/lx2160ardb_tfa_stmm_defconfig
index 7d24ba153bf..cf65897af89 100644
--- a/configs/lx2160ardb_tfa_stmm_defconfig
+++ b/configs/lx2160ardb_tfa_stmm_defconfig
@@ -31,6 +31,8 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_MM_COMM_TEE=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
@@ -106,5 +108,3 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_MAX_CONTROLLER_COUNT=2
-CONFIG_EFI_MM_COMM_TEE=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
index d0765f85b4b..46b6085a52f 100644
--- a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
@@ -28,6 +28,7 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -108,4 +109,3 @@ CONFIG_WDT=y
 CONFIG_WDT_SBSA=y
 CONFIG_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/lx2162aqds_tfa_defconfig b/configs/lx2162aqds_tfa_defconfig
index aaa5d63abc2..41e0262f3ca 100644
--- a/configs/lx2162aqds_tfa_defconfig
+++ b/configs/lx2162aqds_tfa_defconfig
@@ -30,6 +30,7 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
@@ -116,4 +117,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y
 CONFIG_WDT_SBSA=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/lx2162aqds_tfa_verified_boot_defconfig b/configs/lx2162aqds_tfa_verified_boot_defconfig
index daa7e937f96..7abfdbafbdf 100644
--- a/configs/lx2162aqds_tfa_verified_boot_defconfig
+++ b/configs/lx2162aqds_tfa_verified_boot_defconfig
@@ -30,6 +30,7 @@ CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_BOOTDELAY=10
@@ -117,4 +118,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y
 CONFIG_WDT_SBSA=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/lxr2_defconfig b/configs/lxr2_defconfig
index 855366d4215..d202cad0ad9 100644
--- a/configs/lxr2_defconfig
+++ b/configs/lxr2_defconfig
@@ -20,6 +20,7 @@ CONFIG_SYS_MONITOR_LEN=409600
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_OFFSET_REDUND=0x110000
@@ -92,7 +93,6 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0xe00000
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
@@ -104,6 +104,8 @@ CONFIG_RGMII=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_DA9063=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
@@ -116,3 +118,4 @@ CONFIG_SYSRESET=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_SYSRESET_WATCHDOG_AUTO=y
 CONFIG_IMX_THERMAL=y
+CONFIG_WDT_DA9063=y
diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig
index 65a98758aac..d7324ce3272 100644
--- a/configs/m53menlo_defconfig
+++ b/configs/m53menlo_defconfig
@@ -18,11 +18,11 @@ CONFIG_SPL_SERIAL=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x53FA401C
 CONFIG_SPL_STACK=0x70004000
+CONFIG_SYS_LOAD_ADDR=0x70800000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=8000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_OFFSET_REDUND=0x180000
-CONFIG_SYS_LOAD_ADDR=0x70800000
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=1
 CONFIG_OF_BOARD_SETUP=y
diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig
index 8ac29b9289f..ec5df0b5a7a 100644
--- a/configs/malta64_defconfig
+++ b/configs/malta64_defconfig
@@ -5,12 +5,12 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="mti,malta"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0xffffffff81000000
 CONFIG_ENV_ADDR=0xFFFFFFFFBE3E0000
 CONFIG_TARGET_MALTA=y
 CONFIG_CPU_MIPS64_R2=y
 CONFIG_SYS_MIPS_TIMER_FREQ=250000000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=281
diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig
index 0a71013d5fc..b9573dc79f4 100644
--- a/configs/malta64el_defconfig
+++ b/configs/malta64el_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="mti,malta"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0xffffffff81000000
 CONFIG_ENV_ADDR=0xFFFFFFFFBE3E0000
 CONFIG_TARGET_MALTA=y
@@ -12,7 +13,6 @@ CONFIG_BUILD_TARGET="u-boot-swap.bin"
 CONFIG_CPU_MIPS64_R2=y
 CONFIG_SYS_MIPS_TIMER_FREQ=250000000
 CONFIG_SYS_LITTLE_ENDIAN=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=283
diff --git a/configs/malta_defconfig b/configs/malta_defconfig
index 355292ef950..ca017c4865d 100644
--- a/configs/malta_defconfig
+++ b/configs/malta_defconfig
@@ -5,11 +5,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="mti,malta"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_ENV_ADDR=0xBE3E0000
 CONFIG_TARGET_MALTA=y
 CONFIG_SYS_MIPS_TIMER_FREQ=250000000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=281
diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig
index ffd27713963..d016115a027 100644
--- a/configs/maltael_defconfig
+++ b/configs/maltael_defconfig
@@ -5,13 +5,13 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="mti,malta"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_ENV_ADDR=0xBE3E0000
 CONFIG_TARGET_MALTA=y
 CONFIG_BUILD_TARGET="u-boot-swap.bin"
 CONFIG_SYS_MIPS_TIMER_FREQ=250000000
 CONFIG_SYS_LITTLE_ENDIAN=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=283
diff --git a/configs/maxbcm_defconfig b/configs/maxbcm_defconfig
index c5c3a69d73d..ba3631f49ea 100644
--- a/configs/maxbcm_defconfig
+++ b/configs/maxbcm_defconfig
@@ -18,11 +18,12 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40020000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
@@ -63,4 +64,3 @@ CONFIG_SPL_DEBUG_UART_BASE=0xd0012000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig
index 066f42f8545..ec7318cff05 100644
--- a/configs/medcom-wide_defconfig
+++ b/configs/medcom-wide_defconfig
@@ -8,10 +8,10 @@ CONFIG_ENV_OFFSET=0x1FFE0000
 CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide"
 CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_MEDCOM_WIDE=y
 CONFIG_TEGRA_ENABLE_UARTD=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2089
diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index 34e914e4dc3..ca78b32846a 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -8,8 +8,9 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x100000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x0
+CONFIG_SPL=y
 CONFIG_TARGET_MICROBLAZE_GENERIC=y
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
@@ -18,7 +19,6 @@ CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=-1
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/microchip_mpfs_icicle_defconfig b/configs/microchip_mpfs_icicle_defconfig
index 05adfcd9afe..94952a96762 100644
--- a/configs/microchip_mpfs_icicle_defconfig
+++ b/configs/microchip_mpfs_icicle_defconfig
@@ -5,13 +5,13 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="mpfs-icicle-kit"
-CONFIG_SYS_MEM_TOP_HIDE=0x400000
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x80200000
+CONFIG_SYS_MEM_TOP_HIDE=0x400000
 CONFIG_TARGET_MICROCHIP_ICICLE=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=282
diff --git a/configs/milkv_duo_defconfig b/configs/milkv_duo_defconfig
index 1186763a73c..70393de5736 100644
--- a/configs/milkv_duo_defconfig
+++ b/configs/milkv_duo_defconfig
@@ -5,13 +5,13 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x82300000
 CONFIG_DEFAULT_DEVICE_TREE="cv1800b-milkv-duo"
-CONFIG_IDENT_STRING="milkv_duo"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x80080000
+CONFIG_IDENT_STRING="milkv_duo"
 CONFIG_TARGET_MILKV_DUO=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_SYS_CBSIZE=512
 CONFIG_SYS_PBSIZE=544
diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig
index 9e653c73eec..5595352f03a 100644
--- a/configs/miqi-rk3288_defconfig
+++ b/configs/miqi-rk3288_defconfig
@@ -19,12 +19,12 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-miqi.dtb"
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/mk808_defconfig b/configs/mk808_defconfig
index 9a342d3a33a..0610b51748e 100644
--- a/configs/mk808_defconfig
+++ b/configs/mk808_defconfig
@@ -26,10 +26,10 @@ CONFIG_SPL_STACK_R_ADDR=0x70000000
 CONFIG_SPL_STACK=0x1008ffff
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000
+CONFIG_SYS_LOAD_ADDR=0x70800800
 CONFIG_DEBUG_UART_BASE=0x20064000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_FS_FAT=y
-CONFIG_SYS_LOAD_ADDR=0x70800800
 CONFIG_TPL_MAX_SIZE=0x7ffc
 CONFIG_SPL_PAYLOAD="u-boot.bin"
 CONFIG_DEBUG_UART=y
diff --git a/configs/msc_sm2s_imx8mp_defconfig b/configs/msc_sm2s_imx8mp_defconfig
index 47ed5cfb214..fc8448524bd 100644
--- a/configs/msc_sm2s_imx8mp_defconfig
+++ b/configs/msc_sm2s_imx8mp_defconfig
@@ -19,16 +19,16 @@ CONFIG_SPL_STACK=0x960000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x0098FC00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x204000
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SYS_BOOT_GET_CMDLINE=y
 CONFIG_SYS_BARGSIZE=2048
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="imx8mp-msc-sm2s-ep1.dtb"
@@ -44,7 +44,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/mscc_jr2_defconfig b/configs/mscc_jr2_defconfig
index 81366cc4b9c..bc9d1c2457f 100644
--- a/configs/mscc_jr2_defconfig
+++ b/configs/mscc_jr2_defconfig
@@ -6,11 +6,12 @@ CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="jr2_pcb110"
+CONFIG_SYS_BOOTM_LEN=0x1000000
+CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_DEBUG_UART_BASE=0x70100000
 CONFIG_DEBUG_UART_CLOCK=250000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x140000
-CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_ARCH_MSCC=y
 CONFIG_SOC_JR2=y
 CONFIG_SYS_MIPS_TIMER_FREQ=250000000
@@ -19,7 +20,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fc00000
 CONFIG_SYS_LITTLE_ENDIAN=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200"
diff --git a/configs/mscc_luton_defconfig b/configs/mscc_luton_defconfig
index 7db40acf394..a857616e564 100644
--- a/configs/mscc_luton_defconfig
+++ b/configs/mscc_luton_defconfig
@@ -6,11 +6,12 @@ CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="luton_pcb091"
+CONFIG_SYS_BOOTM_LEN=0x1000000
+CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_DEBUG_UART_BASE=0x70100000
 CONFIG_DEBUG_UART_CLOCK=208333333
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x140000
-CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_ARCH_MSCC=y
 CONFIG_SOC_LUTON=y
 CONFIG_DDRTYPE_MT47H128M8HQ=y
@@ -21,7 +22,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x87c00000
 CONFIG_SYS_LITTLE_ENDIAN=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200"
diff --git a/configs/mscc_ocelot_defconfig b/configs/mscc_ocelot_defconfig
index 78e383b52c3..855e966e9ee 100644
--- a/configs/mscc_ocelot_defconfig
+++ b/configs/mscc_ocelot_defconfig
@@ -6,11 +6,12 @@ CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ocelot_pcb123"
+CONFIG_SYS_BOOTM_LEN=0x1000000
+CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_DEBUG_UART_BASE=0x70100000
 CONFIG_DEBUG_UART_CLOCK=250000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x140000
-CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_ARCH_MSCC=y
 CONFIG_SYS_MIPS_TIMER_FREQ=250000000
 CONFIG_DEBUG_UART=y
@@ -18,7 +19,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fc00000
 CONFIG_SYS_LITTLE_ENDIAN=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200"
diff --git a/configs/mscc_serval_defconfig b/configs/mscc_serval_defconfig
index 4d15fcded38..f8a43c4cb14 100644
--- a/configs/mscc_serval_defconfig
+++ b/configs/mscc_serval_defconfig
@@ -6,8 +6,9 @@ CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="serval_pcb106"
-CONFIG_ENV_OFFSET_REDUND=0x140000
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_ENV_OFFSET_REDUND=0x140000
 CONFIG_ARCH_MSCC=y
 CONFIG_SOC_SERVAL=y
 CONFIG_DDRTYPE_H5TQ1G63BFA=y
@@ -16,7 +17,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x87c00000
 CONFIG_SYS_LITTLE_ENDIAN=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200"
diff --git a/configs/mscc_servalt_defconfig b/configs/mscc_servalt_defconfig
index 4de52a35535..a3328c6c099 100644
--- a/configs/mscc_servalt_defconfig
+++ b/configs/mscc_servalt_defconfig
@@ -6,8 +6,9 @@ CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="servalt_pcb116"
-CONFIG_ENV_OFFSET_REDUND=0x140000
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_ENV_OFFSET_REDUND=0x140000
 CONFIG_ARCH_MSCC=y
 CONFIG_SOC_SERVALT=y
 CONFIG_SYS_MIPS_TIMER_FREQ=250000000
@@ -15,7 +16,6 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fc00000
 CONFIG_SYS_LITTLE_ENDIAN=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200"
diff --git a/configs/mt7620_mt7530_rfb_defconfig b/configs/mt7620_mt7530_rfb_defconfig
index 20f62fa86d0..06f37f007c2 100644
--- a/configs/mt7620_mt7530_rfb_defconfig
+++ b/configs/mt7620_mt7530_rfb_defconfig
@@ -12,10 +12,11 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
 CONFIG_SPL_BSS_START_ADDR=0x80010000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
+CONFIG_SYS_BOOTM_LEN=0x1000000
+CONFIG_SYS_LOAD_ADDR=0x80010000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xb0000c00
 CONFIG_DEBUG_UART_CLOCK=40000000
-CONFIG_SYS_LOAD_ADDR=0x80010000
 CONFIG_ARCH_MTMIPS=y
 CONFIG_BOARD_MT7620_MT7530_RFB=y
 CONFIG_SYS_MIPS_TIMER_FREQ=290000000
@@ -25,7 +26,6 @@ CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
 CONFIG_MIPS_BOOT_FDT=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_SYS_MALLOC_BOOTPARAMS=y
 CONFIG_SPL_MAX_SIZE=0x10000
diff --git a/configs/mt7620_rfb_defconfig b/configs/mt7620_rfb_defconfig
index bf9d7115863..ffe9cc8a674 100644
--- a/configs/mt7620_rfb_defconfig
+++ b/configs/mt7620_rfb_defconfig
@@ -12,10 +12,11 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
 CONFIG_SPL_BSS_START_ADDR=0x80010000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
+CONFIG_SYS_BOOTM_LEN=0x1000000
+CONFIG_SYS_LOAD_ADDR=0x80010000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xb0000c00
 CONFIG_DEBUG_UART_CLOCK=40000000
-CONFIG_SYS_LOAD_ADDR=0x80010000
 CONFIG_ARCH_MTMIPS=y
 CONFIG_SYS_MIPS_TIMER_FREQ=290000000
 CONFIG_MIPS_CACHE_SETUP=y
@@ -24,7 +25,6 @@ CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
 CONFIG_MIPS_BOOT_FDT=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_SYS_MALLOC_BOOTPARAMS=y
 CONFIG_SPL_MAX_SIZE=0x10000
diff --git a/configs/mt7621_nand_rfb_defconfig b/configs/mt7621_nand_rfb_defconfig
index 7e12c040ffb..350ce0651e8 100644
--- a/configs/mt7621_nand_rfb_defconfig
+++ b/configs/mt7621_nand_rfb_defconfig
@@ -10,10 +10,11 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x100000
 CONFIG_SPL_BSS_START_ADDR=0x80140000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x83000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xbe000c00
 CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_SYS_LOAD_ADDR=0x83000000
 CONFIG_ARCH_MTMIPS=y
 CONFIG_SOC_MT7621=y
 CONFIG_MT7621_BOOT_FROM_NAND=y
@@ -25,7 +26,6 @@ CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
 CONFIG_MIPS_BOOT_FDT=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_MAX_SIZE=0x30000
diff --git a/configs/mt7621_rfb_defconfig b/configs/mt7621_rfb_defconfig
index ec5996a2e0b..c44ecb19241 100644
--- a/configs/mt7621_rfb_defconfig
+++ b/configs/mt7621_rfb_defconfig
@@ -12,10 +12,11 @@ CONFIG_TPL_SYS_MALLOC_F_LEN=0x1000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
 CONFIG_SPL_BSS_START_ADDR=0x80140000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x83000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xbe000c00
 CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_SYS_LOAD_ADDR=0x83000000
 CONFIG_ARCH_MTMIPS=y
 CONFIG_SOC_MT7621=y
 CONFIG_SYS_MIPS_TIMER_FREQ=440000000
@@ -25,7 +26,6 @@ CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
 CONFIG_MIPS_BOOT_FDT=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_MAX_SIZE=0x30000
diff --git a/configs/mt7622_rfb_defconfig b/configs/mt7622_rfb_defconfig
index 0bda8cdb8fc..47106ca8125 100644
--- a/configs/mt7622_rfb_defconfig
+++ b/configs/mt7622_rfb_defconfig
@@ -6,9 +6,9 @@ CONFIG_TEXT_BASE=0x41e00000
 CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEFAULT_DEVICE_TREE="mt7622-rfb"
+CONFIG_SYS_LOAD_ADDR=0x4007ff28
 CONFIG_DEBUG_UART_BASE=0x11002000
 CONFIG_DEBUG_UART_CLOCK=25000000
-CONFIG_SYS_LOAD_ADDR=0x4007ff28
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
diff --git a/configs/mt7623a_unielec_u7623_02_defconfig b/configs/mt7623a_unielec_u7623_02_defconfig
index 7f5eab4461d..376167dabe6 100644
--- a/configs/mt7623a_unielec_u7623_02_defconfig
+++ b/configs/mt7623a_unielec_u7623_02_defconfig
@@ -11,10 +11,10 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="mt7623a-unielec-u7623-02-emmc"
 CONFIG_TARGET_MT7623=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x84000000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_DEFAULT_FDT_FILE="mt7623a-unielec-u7623-02-emmc.dtb"
diff --git a/configs/mt7623n_bpir2_defconfig b/configs/mt7623n_bpir2_defconfig
index 4c3d90a1b7b..23b750f96ab 100644
--- a/configs/mt7623n_bpir2_defconfig
+++ b/configs/mt7623n_bpir2_defconfig
@@ -11,10 +11,11 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="mt7623n-bananapi-bpi-r2"
 CONFIG_TARGET_MT7623=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x84000000
+# CONFIG_EFI_GRUB_ARM32_WORKAROUND is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_DEFAULT_FDT_FILE="mt7623n-bananapi-bpi-r2.dtb"
@@ -61,4 +62,3 @@ CONFIG_TIMER=y
 CONFIG_MTK_TIMER=y
 CONFIG_WDT_MTK=y
 CONFIG_LZMA=y
-# CONFIG_EFI_GRUB_ARM32_WORKAROUND is not set
diff --git a/configs/mt7628_rfb_defconfig b/configs/mt7628_rfb_defconfig
index 351e6a160e8..0ca8cf65352 100644
--- a/configs/mt7628_rfb_defconfig
+++ b/configs/mt7628_rfb_defconfig
@@ -12,8 +12,9 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
 CONFIG_SPL_BSS_START_ADDR=0x80010000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x80010000
+CONFIG_SPL=y
 CONFIG_ARCH_MTMIPS=y
 CONFIG_SOC_MT7628=y
 CONFIG_BOARD_MT7628_RFB=y
@@ -23,7 +24,6 @@ CONFIG_MIPS_CACHE_DISABLE=y
 CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
 CONFIG_MIPS_BOOT_FDT=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SYS_MALLOC_BOOTPARAMS=y
diff --git a/configs/mt7629_rfb_defconfig b/configs/mt7629_rfb_defconfig
index 8e9306acd57..ef148a9e338 100644
--- a/configs/mt7629_rfb_defconfig
+++ b/configs/mt7629_rfb_defconfig
@@ -17,13 +17,14 @@ CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK_R_ADDR=0x40800000
 CONFIG_SPL_STACK=0x106000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x42007f1c
 CONFIG_SPL_PAYLOAD="u-boot-lzma.img"
 CONFIG_BUILD_TARGET="u-boot-mtk.bin"
 CONFIG_SPL_IMAGE="spl/u-boot-spl-mtk.bin"
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_BOOTDELAY=3
 CONFIG_DEFAULT_FDT_FILE="mt7629-rfb"
 CONFIG_SYS_PBSIZE=1049
@@ -102,4 +103,3 @@ CONFIG_USB_KEYBOARD=y
 CONFIG_WDT_MTK=y
 CONFIG_LZMA=y
 CONFIG_SPL_LZMA=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mt7981_emmc_rfb_defconfig b/configs/mt7981_emmc_rfb_defconfig
index d3e833905f3..dac7d341131 100644
--- a/configs/mt7981_emmc_rfb_defconfig
+++ b/configs/mt7981_emmc_rfb_defconfig
@@ -9,10 +9,11 @@ CONFIG_ENV_SIZE=0x80000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DEFAULT_DEVICE_TREE="mt7981-emmc-rfb"
 CONFIG_TARGET_MT7981=y
+CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART_BASE=0x11002000
 CONFIG_DEBUG_UART_CLOCK=40000000
-CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_DEFAULT_FDT_FILE="mt7981-emmc-rfb"
 CONFIG_SYS_CBSIZE=512
@@ -61,4 +62,3 @@ CONFIG_DM_SERIAL=y
 CONFIG_MTK_SERIAL=y
 CONFIG_FAT_WRITE=y
 CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mt7981_rfb_defconfig b/configs/mt7981_rfb_defconfig
index 4bc2173f13d..86ee98c2526 100644
--- a/configs/mt7981_rfb_defconfig
+++ b/configs/mt7981_rfb_defconfig
@@ -7,10 +7,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEFAULT_DEVICE_TREE="mt7981-rfb"
 CONFIG_TARGET_MT7981=y
+CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART_BASE=0x11002000
 CONFIG_DEBUG_UART_CLOCK=40000000
-CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_DEFAULT_FDT_FILE="mt7981-rfb"
 CONFIG_SYS_CBSIZE=512
@@ -64,4 +65,3 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_MTK_SPIM=y
 CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mt7981_sd_rfb_defconfig b/configs/mt7981_sd_rfb_defconfig
index 8721b4074ac..47203ff4e64 100644
--- a/configs/mt7981_sd_rfb_defconfig
+++ b/configs/mt7981_sd_rfb_defconfig
@@ -9,10 +9,11 @@ CONFIG_ENV_SIZE=0x80000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DEFAULT_DEVICE_TREE="mt7981-sd-rfb"
 CONFIG_TARGET_MT7981=y
+CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART_BASE=0x11002000
 CONFIG_DEBUG_UART_CLOCK=40000000
-CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_DEFAULT_FDT_FILE="mt7981-sd-rfb"
 CONFIG_SYS_CBSIZE=512
@@ -61,4 +62,3 @@ CONFIG_DM_SERIAL=y
 CONFIG_MTK_SERIAL=y
 CONFIG_FAT_WRITE=y
 CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mt7986_rfb_defconfig b/configs/mt7986_rfb_defconfig
index 15c31de236f..c26e81bd654 100644
--- a/configs/mt7986_rfb_defconfig
+++ b/configs/mt7986_rfb_defconfig
@@ -7,10 +7,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEFAULT_DEVICE_TREE="mt7986a-rfb"
 CONFIG_TARGET_MT7986=y
+CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART_BASE=0x11002000
 CONFIG_DEBUG_UART_CLOCK=40000000
-CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_DEFAULT_FDT_FILE="mt7986a-rfb"
 CONFIG_SYS_CBSIZE=512
@@ -64,4 +65,3 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_MTK_SPIM=y
 CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mt7986a_bpir3_emmc_defconfig b/configs/mt7986a_bpir3_emmc_defconfig
index 56921f36057..ef6a4822c18 100644
--- a/configs/mt7986a_bpir3_emmc_defconfig
+++ b/configs/mt7986a_bpir3_emmc_defconfig
@@ -9,10 +9,11 @@ CONFIG_ENV_SIZE=0x80000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc"
 CONFIG_TARGET_MT7986=y
+CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART_BASE=0x11002000
 CONFIG_DEBUG_UART_CLOCK=40000000
-CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_DEFAULT_FDT_FILE="mt7986a-bpi-r3-emmc"
 CONFIG_SYS_CBSIZE=512
@@ -61,4 +62,3 @@ CONFIG_DM_SERIAL=y
 CONFIG_MTK_SERIAL=y
 CONFIG_FAT_WRITE=y
 CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mt7986a_bpir3_sd_defconfig b/configs/mt7986a_bpir3_sd_defconfig
index 4ed06b72d52..3d971f5c313 100644
--- a/configs/mt7986a_bpir3_sd_defconfig
+++ b/configs/mt7986a_bpir3_sd_defconfig
@@ -9,10 +9,11 @@ CONFIG_ENV_SIZE=0x80000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-sd"
 CONFIG_TARGET_MT7986=y
+CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART_BASE=0x11002000
 CONFIG_DEBUG_UART_CLOCK=40000000
-CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_DEFAULT_FDT_FILE="mt7986a-bpi-r3-sd"
 CONFIG_SYS_CBSIZE=512
@@ -61,4 +62,3 @@ CONFIG_DM_SERIAL=y
 CONFIG_MTK_SERIAL=y
 CONFIG_FAT_WRITE=y
 CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mt7988_rfb_defconfig b/configs/mt7988_rfb_defconfig
index f7ceaceb303..96c7368fc5d 100644
--- a/configs/mt7988_rfb_defconfig
+++ b/configs/mt7988_rfb_defconfig
@@ -7,10 +7,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEFAULT_DEVICE_TREE="mt7988-rfb"
 CONFIG_TARGET_MT7988=y
+CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART_BASE=0x11000000
 CONFIG_DEBUG_UART_CLOCK=40000000
-CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_DEFAULT_FDT_FILE="mt7988-rfb"
 CONFIG_SYS_CBSIZE=512
@@ -80,4 +81,3 @@ CONFIG_DM_SPI=y
 CONFIG_MTK_SPIM=y
 CONFIG_LZO=y
 CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mt7988_sd_rfb_defconfig b/configs/mt7988_sd_rfb_defconfig
index 808c8b90116..7d0a262776d 100644
--- a/configs/mt7988_sd_rfb_defconfig
+++ b/configs/mt7988_sd_rfb_defconfig
@@ -7,10 +7,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEFAULT_DEVICE_TREE="mt7988-sd-rfb"
 CONFIG_TARGET_MT7988=y
+CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART_BASE=0x11000000
 CONFIG_DEBUG_UART_CLOCK=40000000
-CONFIG_SYS_LOAD_ADDR=0x46000000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_DEFAULT_FDT_FILE="mt7988-sd-rfb"
 CONFIG_SYS_CBSIZE=512
@@ -68,4 +69,3 @@ CONFIG_DM_SPI=y
 CONFIG_MTK_SPIM=y
 CONFIG_LZO=y
 CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mt8183_pumpkin_defconfig b/configs/mt8183_pumpkin_defconfig
index 92537cd49da..9d0495f470c 100644
--- a/configs/mt8183_pumpkin_defconfig
+++ b/configs/mt8183_pumpkin_defconfig
@@ -11,11 +11,12 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="mt8183-pumpkin"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_TARGET_MT8183=y
+CONFIG_SYS_LOAD_ADDR=0x4c000000
 CONFIG_DEBUG_UART_BASE=0x11002000
 CONFIG_DEBUG_UART_CLOCK=26000000
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x4c000000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
@@ -84,4 +85,3 @@ CONFIG_WDT=y
 CONFIG_WDT_MTK=y
 # CONFIG_RANDOM_UUID is not set
 # CONFIG_REGEX is not set
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mt8365_evk_defconfig b/configs/mt8365_evk_defconfig
index 94b1f025fc0..6ec3aa834b1 100644
--- a/configs/mt8365_evk_defconfig
+++ b/configs/mt8365_evk_defconfig
@@ -7,8 +7,8 @@ CONFIG_TEXT_BASE=0x4c000000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEFAULT_DEVICE_TREE="mt8365-evk"
 CONFIG_TARGET_MT8365=y
-CONFIG_IDENT_STRING=" mt8365-evk"
 CONFIG_SYS_LOAD_ADDR=0x4c000000
+CONFIG_IDENT_STRING=" mt8365-evk"
 CONFIG_DEFAULT_FDT_FILE="mt8365-evk"
 CONFIG_CLK=y
 CONFIG_MMC_MTK=y
diff --git a/configs/mt8516_pumpkin_defconfig b/configs/mt8516_pumpkin_defconfig
index 48eff4136e7..a968e83dd54 100644
--- a/configs/mt8516_pumpkin_defconfig
+++ b/configs/mt8516_pumpkin_defconfig
@@ -10,10 +10,10 @@ CONFIG_ENV_OFFSET=0x0
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="mt8516-pumpkin"
 CONFIG_TARGET_MT8516=y
+CONFIG_SYS_LOAD_ADDR=0x4c000000
 CONFIG_DEBUG_UART_BASE=0x11005000
 CONFIG_DEBUG_UART_CLOCK=26000000
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x4c000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
diff --git a/configs/mvebu_crb_cn9130_defconfig b/configs/mvebu_crb_cn9130_defconfig
index 4d5f575b038..505f063605f 100644
--- a/configs/mvebu_crb_cn9130_defconfig
+++ b/configs/mvebu_crb_cn9130_defconfig
@@ -9,14 +9,14 @@ CONFIG_TARGET_OCTEONTX2_CN913x=y
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x3f0000
 CONFIG_DEFAULT_DEVICE_TREE="cn9130-crb-A"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DEBUG_UART_BASE=0xf0512000
 CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_PBSIZE=1051
diff --git a/configs/mvebu_db-88f3720_defconfig b/configs/mvebu_db-88f3720_defconfig
index b955abb31e6..962edb790b7 100644
--- a/configs/mvebu_db-88f3720_defconfig
+++ b/configs/mvebu_db-88f3720_defconfig
@@ -11,8 +11,8 @@ CONFIG_ENV_OFFSET=0x3f0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-3720-db"
-CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_SYS_LOAD_ADDR=0x6000000
+CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -78,4 +78,3 @@ CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_SHA1=y
diff --git a/configs/mvebu_db_armada8k_defconfig b/configs/mvebu_db_armada8k_defconfig
index 6913796c010..7c6b53ed3a6 100644
--- a/configs/mvebu_db_armada8k_defconfig
+++ b/configs/mvebu_db_armada8k_defconfig
@@ -10,14 +10,14 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x3f0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="armada-8040-db"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DEBUG_UART_BASE=0xf0512000
 CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/mvebu_db_cn9130_defconfig b/configs/mvebu_db_cn9130_defconfig
index 9133e25b241..f80812c811a 100644
--- a/configs/mvebu_db_cn9130_defconfig
+++ b/configs/mvebu_db_cn9130_defconfig
@@ -11,14 +11,14 @@ CONFIG_ENV_OFFSET=0x3f0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="cn9130-db-A"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DEBUG_UART_BASE=0xf0512000
 CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_PBSIZE=1051
diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig
index 7ecf5ab0d64..375705caa4b 100644
--- a/configs/mvebu_espressobin-88f3720_defconfig
+++ b/configs/mvebu_espressobin-88f3720_defconfig
@@ -12,8 +12,8 @@ CONFIG_ENV_OFFSET=0x3F0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-3720-espressobin"
-CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_SYS_LOAD_ADDR=0x6000000
+CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -100,4 +100,3 @@ CONFIG_USB_ETHER_SMSC95XX=y
 # CONFIG_WATCHDOG_AUTOSTART is not set
 CONFIG_WDT=y
 CONFIG_WDT_ARMADA_37XX=y
-CONFIG_SHA1=y
diff --git a/configs/mvebu_espressobin_ultra-88f3720_defconfig b/configs/mvebu_espressobin_ultra-88f3720_defconfig
index 974b6df165a..fe3def1fe6b 100644
--- a/configs/mvebu_espressobin_ultra-88f3720_defconfig
+++ b/configs/mvebu_espressobin_ultra-88f3720_defconfig
@@ -97,4 +97,3 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_WATCHDOG_AUTOSTART is not set
 CONFIG_WDT=y
 CONFIG_WDT_ARMADA_37XX=y
-CONFIG_SHA1=y
diff --git a/configs/mvebu_mcbin-88f8040_defconfig b/configs/mvebu_mcbin-88f8040_defconfig
index eef612a261e..c1b470c9825 100644
--- a/configs/mvebu_mcbin-88f8040_defconfig
+++ b/configs/mvebu_mcbin-88f8040_defconfig
@@ -11,14 +11,14 @@ CONFIG_ENV_OFFSET=0x180000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-8040-mcbin"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DEBUG_UART_BASE=0xf0512000
 CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/mvebu_puzzle-m801-88f8040_defconfig b/configs/mvebu_puzzle-m801-88f8040_defconfig
index b00e92908b3..1d86e26833d 100644
--- a/configs/mvebu_puzzle-m801-88f8040_defconfig
+++ b/configs/mvebu_puzzle-m801-88f8040_defconfig
@@ -11,14 +11,15 @@ CONFIG_ENV_OFFSET=0x1F0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-8040-puzzle-m801"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DEBUG_UART_BASE=0xf0512000
 CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_BOOTM_LEN=0x800000
+# CONFIG_EFI_LOADER is not set
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
@@ -82,4 +83,3 @@ CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig
index 335de62e84b..3016f750e64 100644
--- a/configs/mx23_olinuxino_defconfig
+++ b/configs/mx23_olinuxino_defconfig
@@ -12,8 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="imx23-olinuxino"
 CONFIG_SPL_TEXT_BASE=0x00001000
 CONFIG_TARGET_MX23_OLINUXINO=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x42000000
+CONFIG_SPL=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loaduimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
diff --git a/configs/mx23evk_defconfig b/configs/mx23evk_defconfig
index 7d0e7cc1e00..793ba6add55 100644
--- a/configs/mx23evk_defconfig
+++ b/configs/mx23evk_defconfig
@@ -14,8 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="imx23-evk"
 CONFIG_SPL_TEXT_BASE=0x00001000
 CONFIG_TARGET_MX23EVK=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x42000000
+CONFIG_SPL=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else echo ERR: Fail to boot from MMC; fi; fi; else exit; fi"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig
index dddb57efd3e..a94d34d2c4c 100644
--- a/configs/mx28evk_defconfig
+++ b/configs/mx28evk_defconfig
@@ -14,8 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="imx28-evk"
 CONFIG_SPL_TEXT_BASE=0x00001000
 CONFIG_TARGET_MX28EVK=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x42000000
+CONFIG_SPL=y
 CONFIG_FIT=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig
index 5932a15a33d..d4457859f12 100644
--- a/configs/mx51evk_defconfig
+++ b/configs/mx51evk_defconfig
@@ -8,8 +8,8 @@ CONFIG_ENV_OFFSET=0xC0000
 CONFIG_TARGET_MX51EVK=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx51-babbage"
-# CONFIG_CMD_BMODE is not set
 CONFIG_SYS_LOAD_ADDR=0x92000000
+# CONFIG_CMD_BMODE is not set
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=785408
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index c20c6a40a1d..614cec14102 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -8,8 +8,8 @@ CONFIG_ENV_OFFSET=0x60000
 CONFIG_TARGET_MX53CX9020=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020"
-# CONFIG_CMD_BMODE is not set
 CONFIG_SYS_LOAD_ADDR=0x70010000
+# CONFIG_CMD_BMODE is not set
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_USE_PREBOOT=y
diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig
index e2d3bc0b094..fa7b04383e0 100644
--- a/configs/mx53loco_defconfig
+++ b/configs/mx53loco_defconfig
@@ -9,8 +9,8 @@ CONFIG_ENV_OFFSET=0xC0000
 CONFIG_TARGET_MX53LOCO=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx53-qsb"
-# CONFIG_CMD_BMODE is not set
 CONFIG_SYS_LOAD_ADDR=0x72000000
+# CONFIG_CMD_BMODE is not set
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=785408
 CONFIG_SUPPORT_RAW_INITRD=y
diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig
index 463cfc64ada..d91c59ffe46 100644
--- a/configs/mx53ppd_defconfig
+++ b/configs/mx53ppd_defconfig
@@ -9,8 +9,8 @@ CONFIG_TARGET_MX53PPD=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx53-ppd"
 CONFIG_BOOTCOUNT_BOOTLIMIT=10
-CONFIG_WATCHDOG_TIMEOUT_MSECS=8000
 CONFIG_SYS_LOAD_ADDR=0x72000000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=8000
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=1
diff --git a/configs/mx6memcal_defconfig b/configs/mx6memcal_defconfig
index 4c8a5960d38..0c98c685565 100644
--- a/configs/mx6memcal_defconfig
+++ b/configs/mx6memcal_defconfig
@@ -14,6 +14,7 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_SYS_MEMTEST_START=0x10000000
 CONFIG_SYS_MEMTEST_END=0x20000000
+# CONFIG_EFI_LOADER is not set
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_SYS_PBSIZE=528
 CONFIG_SPL_SYS_MALLOC=y
@@ -44,4 +45,3 @@ CONFIG_BOUNCE_BUFFER=y
 CONFIG_FSL_USDHC=y
 CONFIG_MXC_UART=y
 CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index f5c5a5c5ace..68df8d4c741 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -10,6 +10,7 @@ CONFIG_MX6SX=y
 CONFIG_TARGET_MX6SXSABRESD=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6sx-sdb"
+CONFIG_SF_DEFAULT_BUS=1
 # CONFIG_CMD_BMODE is not set
 CONFIG_NXP_BOARD_REVISION=y
 CONFIG_PCI=y
@@ -51,7 +52,6 @@ CONFIG_SYS_I2C_MXC=y
 CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
diff --git a/configs/mx7ulp_com_defconfig b/configs/mx7ulp_com_defconfig
index f8dcc0abef5..eba57dd5fb1 100644
--- a/configs/mx7ulp_com_defconfig
+++ b/configs/mx7ulp_com_defconfig
@@ -10,10 +10,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-com"
 CONFIG_LDO_ENABLED_MODE=y
 CONFIG_TARGET_MX7ULP_COM=y
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x60800000
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=785408
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="if run loadimage; then run mmcboot; fi"
 CONFIG_DEFAULT_FDT_FILE="imx7ulp-com"
diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig
index 38e6b62df45..262ee671fa0 100644
--- a/configs/mx7ulp_evk_defconfig
+++ b/configs/mx7ulp_evk_defconfig
@@ -8,11 +8,11 @@ CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
 CONFIG_TARGET_MX7ULP_EVK=y
-# CONFIG_HAS_ARMV7_SECURE_BASE is not set
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x60800000
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_SYS_MEMTEST_START=0x60000000
 CONFIG_SYS_MEMTEST_END=0x9e000000
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi"
diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig
index d007d180969..dc9fc50e150 100644
--- a/configs/mx7ulp_evk_plugin_defconfig
+++ b/configs/mx7ulp_evk_plugin_defconfig
@@ -8,11 +8,11 @@ CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
 CONFIG_TARGET_MX7ULP_EVK=y
-# CONFIG_HAS_ARMV7_SECURE_BASE is not set
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x60800000
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_SYS_MEMTEST_START=0x60000000
 CONFIG_SYS_MEMTEST_END=0x9e000000
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi"
 CONFIG_SYS_CBSIZE=512
diff --git a/configs/n2350_defconfig b/configs/n2350_defconfig
index e7d7deabfe6..8d54882ee85 100644
--- a/configs/n2350_defconfig
+++ b/configs/n2350_defconfig
@@ -23,11 +23,11 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
 CONFIG_IDENT_STRING="\nThecus N2350"
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_ENV_ADDR=0x100000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
index c63f4c076d5..26c12c51078 100644
--- a/configs/nanopc-t4-rk3399_defconfig
+++ b/configs/nanopc-t4-rk3399_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-nanopc-t4"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
diff --git a/configs/nanopc-t6-rk3588_defconfig b/configs/nanopc-t6-rk3588_defconfig
index 926267f93ad..d62c8168a8d 100644
--- a/configs/nanopc-t6-rk3588_defconfig
+++ b/configs/nanopc-t6-rk3588_defconfig
@@ -10,11 +10,12 @@ CONFIG_ROCKCHIP_RK3588=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_NANOPCT6_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=5
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
@@ -56,7 +57,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=5
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_WINBOND=y
diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig
index 2e1c756bf7a..797a7f56723 100644
--- a/configs/nanopi-k2_defconfig
+++ b/configs/nanopi-k2_defconfig
@@ -9,10 +9,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxbb-nanopi-k2"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" nanopi-k2"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/nanopi-m4-2gb-rk3399_defconfig b/configs/nanopi-m4-2gb-rk3399_defconfig
index 08c21ee6e5d..d24b7bc6d17 100644
--- a/configs/nanopi-m4-2gb-rk3399_defconfig
+++ b/configs/nanopi-m4-2gb-rk3399_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4-2gb"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
index ad01431cc3a..da3e44af841 100644
--- a/configs/nanopi-m4-rk3399_defconfig
+++ b/configs/nanopi-m4-rk3399_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-nanopi-m4"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/nanopi-m4b-rk3399_defconfig b/configs/nanopi-m4b-rk3399_defconfig
index 34f892d5d3c..247056ab58b 100644
--- a/configs/nanopi-m4b-rk3399_defconfig
+++ b/configs/nanopi-m4b-rk3399_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-nanopi-m4b"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
index f38235489ff..305877d2079 100644
--- a/configs/nanopi-neo4-rk3399_defconfig
+++ b/configs/nanopi-neo4-rk3399_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-nanopi-neo4"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/nanopi-r2c-plus-rk3328_defconfig b/configs/nanopi-r2c-plus-rk3328_defconfig
index f311a0a80ba..702fb5b6ad5 100644
--- a/configs/nanopi-r2c-plus-rk3328_defconfig
+++ b/configs/nanopi-r2c-plus-rk3328_defconfig
@@ -9,9 +9,9 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3328-nanopi-r2c-plus"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/nanopi-r2c-rk3328_defconfig b/configs/nanopi-r2c-rk3328_defconfig
index 533dc1029f7..02edd493f84 100644
--- a/configs/nanopi-r2c-rk3328_defconfig
+++ b/configs/nanopi-r2c-rk3328_defconfig
@@ -9,9 +9,9 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3328-nanopi-r2c"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig
index 2591a9cc8ab..883471d6691 100644
--- a/configs/nanopi-r2s-rk3328_defconfig
+++ b/configs/nanopi-r2s-rk3328_defconfig
@@ -9,9 +9,9 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3328-nanopi-r2s"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig
index ada04b46cb1..a6dafe3d9eb 100644
--- a/configs/nanopi-r4s-rk3399_defconfig
+++ b/configs/nanopi-r4s-rk3399_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-nanopi-r4s"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig
index 8e30093ed9d..4a43b17ccb1 100644
--- a/configs/nanopi-r5c-rk3568_defconfig
+++ b/configs/nanopi-r5c-rk3568_defconfig
@@ -6,9 +6,9 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-nanopi-r5c"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig
index e1865b2e171..a60d229fbbf 100644
--- a/configs/nanopi-r5s-rk3568_defconfig
+++ b/configs/nanopi-r5s-rk3568_defconfig
@@ -6,9 +6,9 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-nanopi-r5s"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
diff --git a/configs/nanopi-r6c-rk3588s_defconfig b/configs/nanopi-r6c-rk3588s_defconfig
index f8d2d67bd35..c4de5518a72 100644
--- a/configs/nanopi-r6c-rk3588s_defconfig
+++ b/configs/nanopi-r6c-rk3588s_defconfig
@@ -7,9 +7,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-nanopi-r6c"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_NANOPI_R6C_RK3588S=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
diff --git a/configs/nanopi-r6s-rk3588s_defconfig b/configs/nanopi-r6s-rk3588s_defconfig
index f7b364655ff..2726729b9ac 100644
--- a/configs/nanopi-r6s-rk3588s_defconfig
+++ b/configs/nanopi-r6s-rk3588s_defconfig
@@ -7,9 +7,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-nanopi-r6s"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_NANOPI_R6S_RK3588S=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig
index 4ea342a0434..bf47ec63814 100644
--- a/configs/nas220_defconfig
+++ b/configs/nas220_defconfig
@@ -11,8 +11,8 @@ CONFIG_TARGET_NAS220=y
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0xA0000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-blackarmor-nas220"
-CONFIG_IDENT_STRING="\nNAS 220"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nNAS 220"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig
index 39cbc3384ff..2f1ea409252 100644
--- a/configs/net2big_v2_defconfig
+++ b/configs/net2big_v2_defconfig
@@ -13,8 +13,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-net2big"
-CONFIG_IDENT_STRING=" 2Big v2"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" 2Big v2"
 CONFIG_ENV_ADDR=0x70000
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig
index cd416cb1501..97b528cc0f5 100644
--- a/configs/netspace_lite_v2_defconfig
+++ b/configs/netspace_lite_v2_defconfig
@@ -13,8 +13,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ns2lite"
-CONFIG_IDENT_STRING=" NS v2 Lite"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" NS v2 Lite"
 CONFIG_ENV_ADDR=0x70000
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig
index 6a3d9296ac5..ce9d8d976bf 100644
--- a/configs/netspace_max_v2_defconfig
+++ b/configs/netspace_max_v2_defconfig
@@ -13,8 +13,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ns2max"
-CONFIG_IDENT_STRING=" NS Max v2"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" NS Max v2"
 CONFIG_ENV_ADDR=0x70000
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig
index e25631b09f4..b4676192d4d 100644
--- a/configs/netspace_mini_v2_defconfig
+++ b/configs/netspace_mini_v2_defconfig
@@ -13,8 +13,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ns2mini"
-CONFIG_IDENT_STRING=" NS v2 Mini"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" NS v2 Mini"
 CONFIG_ENV_ADDR=0x70000
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig
index b6ac2a8b198..562654c4c81 100644
--- a/configs/netspace_v2_defconfig
+++ b/configs/netspace_v2_defconfig
@@ -13,8 +13,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x70000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ns2"
-CONFIG_IDENT_STRING=" NS v2"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING=" NS v2"
 CONFIG_ENV_ADDR=0x70000
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_BOOTDELAY=3
diff --git a/configs/neu2-io-rv1126_defconfig b/configs/neu2-io-rv1126_defconfig
index 2a4c9b45a04..18230859b18 100644
--- a/configs/neu2-io-rv1126_defconfig
+++ b/configs/neu2-io-rv1126_defconfig
@@ -9,12 +9,12 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rv1126-edgeble-neu2-io"
 CONFIG_SYS_MONITOR_LEN=614400
 CONFIG_ROCKCHIP_RV1126=y
 CONFIG_TARGET_RV1126_NEU2=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0xe00800
 CONFIG_DEBUG_UART_BASE=0xff570000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xe00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DEFAULT_FDT_FILE="rv1126-edgeble-neu2-io.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/neu6a-io-rk3588_defconfig b/configs/neu6a-io-rk3588_defconfig
index ac281e65392..291e0d26d42 100644
--- a/configs/neu6a-io-rk3588_defconfig
+++ b/configs/neu6a-io-rk3588_defconfig
@@ -6,9 +6,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-edgeble-neu6a-io"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_RK3588_NEU6=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/neu6b-io-rk3588_defconfig b/configs/neu6b-io-rk3588_defconfig
index c01e5fb0d04..4e22852f23c 100644
--- a/configs/neu6b-io-rk3588_defconfig
+++ b/configs/neu6b-io-rk3588_defconfig
@@ -6,9 +6,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-edgeble-neu6b-io"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_RK3588_NEU6=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/nova-rk3588s_defconfig b/configs/nova-rk3588s_defconfig
index a2e2440359c..fb30dfd1db8 100644
--- a/configs/nova-rk3588s_defconfig
+++ b/configs/nova-rk3588s_defconfig
@@ -6,9 +6,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-indiedroid-nova"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_NOVA_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig
index e859a43ffa3..f4e998e1bdd 100644
--- a/configs/nsa310s_defconfig
+++ b/configs/nsa310s_defconfig
@@ -14,10 +14,10 @@ CONFIG_TARGET_NSA310S=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xE0000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-nsa310s"
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=166666667
 CONFIG_IDENT_STRING="\nZyXEL NSA310S/320S 1/2-Bay Power Media Server"
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTSTD_FULL=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/nsa325_defconfig b/configs/nsa325_defconfig
index 88a890002ea..607810c5114 100644
--- a/configs/nsa325_defconfig
+++ b/configs/nsa325_defconfig
@@ -14,8 +14,8 @@ CONFIG_TARGET_NSA325=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-nsa325"
-CONFIG_IDENT_STRING="\nZyXEL NSA325 2-Bay Power Media Server"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nZyXEL NSA325 2-Bay Power Media Server"
 CONFIG_PCI=y
 CONFIG_LTO=y
 CONFIG_BOOTSTD_FULL=y
diff --git a/configs/nsim_700_defconfig b/configs/nsim_700_defconfig
index be2539e8cd7..a46d2ee232a 100644
--- a/configs/nsim_700_defconfig
+++ b/configs/nsim_700_defconfig
@@ -7,12 +7,12 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30
 CONFIG_DEFAULT_DEVICE_TREE="nsim"
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART_BASE=0xf0000000
 CONFIG_DEBUG_UART_CLOCK=70000000
 CONFIG_SYS_CLK_FREQ=70000000
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200n8"
diff --git a/configs/nsim_700be_defconfig b/configs/nsim_700be_defconfig
index 1fcf36a28a5..8dc31819fa1 100644
--- a/configs/nsim_700be_defconfig
+++ b/configs/nsim_700be_defconfig
@@ -8,12 +8,12 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30
 CONFIG_DEFAULT_DEVICE_TREE="nsim"
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART_BASE=0xf0000000
 CONFIG_DEBUG_UART_CLOCK=70000000
 CONFIG_SYS_CLK_FREQ=70000000
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200n8"
diff --git a/configs/nsim_hs38_defconfig b/configs/nsim_hs38_defconfig
index 58819e0f6a1..a652687156c 100644
--- a/configs/nsim_hs38_defconfig
+++ b/configs/nsim_hs38_defconfig
@@ -8,12 +8,12 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30
 CONFIG_DEFAULT_DEVICE_TREE="nsim"
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART_BASE=0xf0000000
 CONFIG_DEBUG_UART_CLOCK=70000000
 CONFIG_SYS_CLK_FREQ=70000000
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200n8"
diff --git a/configs/nsim_hs38be_defconfig b/configs/nsim_hs38be_defconfig
index 9c26e4da7d2..5f21b31c84a 100644
--- a/configs/nsim_hs38be_defconfig
+++ b/configs/nsim_hs38be_defconfig
@@ -9,12 +9,12 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30
 CONFIG_DEFAULT_DEVICE_TREE="nsim"
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART_BASE=0xf0000000
 CONFIG_DEBUG_UART_CLOCK=70000000
 CONFIG_SYS_CLK_FREQ=70000000
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200n8"
diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig
index efcc8f70370..60db3faf01b 100644
--- a/configs/nyan-big_defconfig
+++ b/configs/nyan-big_defconfig
@@ -10,10 +10,10 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra124-nyan-big"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x82408000
 CONFIG_TEGRA124=y
 CONFIG_TARGET_NYAN_BIG=y
 CONFIG_TEGRA_GPU=y
-CONFIG_SYS_LOAD_ADDR=0x82408000
 CONFIG_FIT=y
 CONFIG_FIT_BEST_MATCH=y
 CONFIG_BOOTSTAGE=y
diff --git a/configs/octeon_ebb7304_defconfig b/configs/octeon_ebb7304_defconfig
index cb711f0ad4c..41b158739b7 100644
--- a/configs/octeon_ebb7304_defconfig
+++ b/configs/octeon_ebb7304_defconfig
@@ -5,9 +5,10 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
 CONFIG_DEBUG_UART_BASE=0x8001180000000800
 CONFIG_DEBUG_UART_CLOCK=1200000000
-CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
 CONFIG_ENV_ADDR=0x800000001FBFE000
 CONFIG_ARCH_OCTEON=y
 # CONFIG_MIPS_CACHE_SETUP is not set
@@ -16,7 +17,6 @@ CONFIG_MIPS_RELOCATION_TABLE_SIZE=0xc000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_OF_BOARD_FIXUP=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=276
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
diff --git a/configs/octeon_nic23_defconfig b/configs/octeon_nic23_defconfig
index 5a8db5a0876..0febe80bd96 100644
--- a/configs/octeon_nic23_defconfig
+++ b/configs/octeon_nic23_defconfig
@@ -6,9 +6,10 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xe000
 CONFIG_ENV_SECT_SIZE=0x100
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
 CONFIG_DEBUG_UART_BASE=0x8001180000000800
 CONFIG_DEBUG_UART_CLOCK=800000000
-CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
 CONFIG_ENV_ADDR=0xe000
 CONFIG_ARCH_OCTEON=y
 CONFIG_TARGET_OCTEON_NIC23=y
@@ -19,7 +20,6 @@ CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 CONFIG_OF_BOARD_FIXUP=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=276
 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
diff --git a/configs/octeontx2_95xx_defconfig b/configs/octeontx2_95xx_defconfig
index c5dc4f4dfa6..b9d36d612d2 100644
--- a/configs/octeontx2_95xx_defconfig
+++ b/configs/octeontx2_95xx_defconfig
@@ -14,16 +14,16 @@ CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_TARGET_OCTEONTX2_95XX=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="octeontx"
+CONFIG_SYS_BOOTM_LEN=0x10000000
+CONFIG_SYS_LOAD_ADDR=0x4000000
 CONFIG_DEBUG_UART_BASE=0x87e028000000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x4000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x04000000
 CONFIG_SYS_MEMTEST_END=0x040f0000
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
-CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=5
 CONFIG_BOOT_RETRY=y
diff --git a/configs/octeontx2_96xx_defconfig b/configs/octeontx2_96xx_defconfig
index ad61b80300f..89e01539399 100644
--- a/configs/octeontx2_96xx_defconfig
+++ b/configs/octeontx2_96xx_defconfig
@@ -14,16 +14,16 @@ CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_TARGET_OCTEONTX2_96XX=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="octeontx"
+CONFIG_SYS_BOOTM_LEN=0x10000000
+CONFIG_SYS_LOAD_ADDR=0x4000000
 CONFIG_DEBUG_UART_BASE=0x87e028000000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x4000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
-CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=5
 CONFIG_BOOT_RETRY=y
diff --git a/configs/octeontx_81xx_defconfig b/configs/octeontx_81xx_defconfig
index 1d39bce6abd..2fd30050b26 100644
--- a/configs/octeontx_81xx_defconfig
+++ b/configs/octeontx_81xx_defconfig
@@ -14,9 +14,10 @@ CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_TARGET_OCTEONTX_81XX=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="octeontx"
+CONFIG_SYS_BOOTM_LEN=0x10000000
+CONFIG_SYS_LOAD_ADDR=0x2800000
 CONFIG_DEBUG_UART_BASE=0x87e028000000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x2800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -24,7 +25,6 @@ CONFIG_SYS_MEMTEST_START=0x2800000
 CONFIG_SYS_MEMTEST_END=0x28f0000
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
-CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=5
 CONFIG_BOOT_RETRY=y
diff --git a/configs/octeontx_83xx_defconfig b/configs/octeontx_83xx_defconfig
index ba9fc5f9553..6ab8ebc41b3 100644
--- a/configs/octeontx_83xx_defconfig
+++ b/configs/octeontx_83xx_defconfig
@@ -14,15 +14,15 @@ CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_TARGET_OCTEONTX_83XX=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="octeontx"
+CONFIG_SYS_BOOTM_LEN=0x10000000
+CONFIG_SYS_LOAD_ADDR=0x2800000
 CONFIG_DEBUG_UART_BASE=0x87e028000000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x2800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
-CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=5
 CONFIG_BOOT_RETRY=y
diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig
index ce5eaec3cd2..bcaab46f8bc 100644
--- a/configs/odroid-c2_defconfig
+++ b/configs/odroid-c2_defconfig
@@ -9,10 +9,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxbb-odroidc2"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" odroid-c2"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/odroid-c4_defconfig b/configs/odroid-c4_defconfig
index 4ef1e681666..cc3d7fc7484 100644
--- a/configs/odroid-c4_defconfig
+++ b/configs/odroid-c4_defconfig
@@ -11,10 +11,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-odroid-c4"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" odroid-c4/hc4"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/odroid-go-ultra_defconfig b/configs/odroid-go-ultra_defconfig
index 06437fe3ae0..4bbda284ef1 100644
--- a/configs/odroid-go-ultra_defconfig
+++ b/configs/odroid-go-ultra_defconfig
@@ -11,10 +11,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-odroid-go-ultra"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" odroid-go-ultra"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig
index b38676a0a8a..492802dddae 100644
--- a/configs/odroid-go2_defconfig
+++ b/configs/odroid-go2_defconfig
@@ -13,9 +13,9 @@ CONFIG_TARGET_ODROID_GO2=y
 CONFIG_DEBUG_UART_CHANNEL=1
 # CONFIG_TPL_LIBCOMMON_SUPPORT is not set
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF160000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/odroid-hc4_defconfig b/configs/odroid-hc4_defconfig
index 60233fb9cee..97fae4df75b 100644
--- a/configs/odroid-hc4_defconfig
+++ b/configs/odroid-hc4_defconfig
@@ -11,10 +11,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-odroid-hc4"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" odroid-hc4"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/odroid-m1-rk3568_defconfig b/configs/odroid-m1-rk3568_defconfig
index b5263caff6d..a8e8a8781e1 100644
--- a/configs/odroid-m1-rk3568_defconfig
+++ b/configs/odroid-m1-rk3568_defconfig
@@ -9,11 +9,12 @@ CONFIG_ROCKCHIP_RK3568=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_ODROID_M1_RK3568=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=4
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -63,7 +64,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=4
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_MTD=y
diff --git a/configs/odroid-n2_defconfig b/configs/odroid-n2_defconfig
index a4cc766f84a..a8cbaee3c96 100644
--- a/configs/odroid-n2_defconfig
+++ b/configs/odroid-n2_defconfig
@@ -11,10 +11,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-odroid-n2"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" odroid-n2/n2-plus"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/odroid-n2l_defconfig b/configs/odroid-n2l_defconfig
index 3f657d18812..773c8061db3 100644
--- a/configs/odroid-n2l_defconfig
+++ b/configs/odroid-n2l_defconfig
@@ -11,10 +11,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-odroid-n2l"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" odroid-n2l"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
index c80900e2cc5..6431f59568c 100644
--- a/configs/odroid-xu3_defconfig
+++ b/configs/odroid-xu3_defconfig
@@ -13,9 +13,9 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x42e00000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x310000
 CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3"
+CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2"
 CONFIG_SYS_MEM_TOP_HIDE=0x01600000
-CONFIG_SYS_LOAD_ADDR=0x43e00000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
 CONFIG_FIT_BEST_MATCH=y
diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig
index fab41bd88f8..93270e0129d 100644
--- a/configs/odroid_defconfig
+++ b/configs/odroid_defconfig
@@ -16,8 +16,8 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x140000
 CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_SYS_MEM_TOP_HIDE=0x00100000
 CONFIG_SYS_LOAD_ADDR=0x43e00000
+CONFIG_SYS_MEM_TOP_HIDE=0x00100000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
index 29aa01fb3d7..a599a39025f 100644
--- a/configs/omap35_logic_defconfig
+++ b/configs/omap35_logic_defconfig
@@ -22,7 +22,6 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 # CONFIG_SPL_FS_EXT4 is not set
 # CONFIG_SPL_I2C is not set
 CONFIG_SPL_MTD=y
diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig
index 4c60514dacf..64d66c339a4 100644
--- a/configs/omap35_logic_somlv_defconfig
+++ b/configs/omap35_logic_somlv_defconfig
@@ -23,7 +23,6 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 # CONFIG_SPL_FS_EXT4 is not set
 # CONFIG_SPL_I2C is not set
 CONFIG_SPL_MTD=y
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index e3791daf249..fb00789489a 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -21,7 +21,6 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 # CONFIG_SPL_FS_EXT4 is not set
 # CONFIG_SPL_I2C is not set
 CONFIG_SPL_MTD=y
diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig
index e9291d527dd..06c9a7b85d8 100644
--- a/configs/omap3_logic_somlv_defconfig
+++ b/configs/omap3_logic_somlv_defconfig
@@ -23,7 +23,6 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 # CONFIG_SPL_FS_EXT4 is not set
 # CONFIG_SPL_I2C is not set
 CONFIG_SPL_MTD=y
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index 947a6c6b3bc..51ed353fca3 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -25,8 +25,8 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x8001ff00
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0xc0000000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0xc0700000
+CONFIG_SPL=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/openpiton_riscv64_defconfig b/configs/openpiton_riscv64_defconfig
index cdb9e1c932e..a47214b0a42 100644
--- a/configs/openpiton_riscv64_defconfig
+++ b/configs/openpiton_riscv64_defconfig
@@ -6,6 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x82000000
 CONFIG_DEFAULT_DEVICE_TREE="openpiton-riscv64"
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_BOOTM_LEN=0x10000000
 CONFIG_SYS_LOAD_ADDR=0x87000000
 CONFIG_TARGET_OPENPITON_RISCV64=y
 CONFIG_ARCH_RV64I=y
@@ -15,8 +16,8 @@ CONFIG_OF_BOARD_FIXUP=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 # CONFIG_EXPERT is not set
+# CONFIG_EFI_LOADER is not set
 # CONFIG_LEGACY_IMAGE_FORMAT is not set
-CONFIG_SYS_BOOTM_LEN=0x10000000
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="fdt addr ${fdtcontroladdr}; fdt move ${fdtcontroladdr} ${fdt_addr_r}; load mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} ${image}; booti ${kernel_addr_r} - ${fdt_addr_r}; "
@@ -74,8 +75,6 @@ CONFIG_DM_RTC=y
 CONFIG_SYS_NS16550=y
 CONFIG_FS_SQUASHFS=y
 # CONFIG_RANDOM_UUID is not set
-CONFIG_SHA1=y
 CONFIG_SHA256=y
 CONFIG_MD5=y
 CONFIG_GETOPT=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/openpiton_riscv64_spl_defconfig b/configs/openpiton_riscv64_spl_defconfig
index a08040d878d..d2eb891d69e 100644
--- a/configs/openpiton_riscv64_spl_defconfig
+++ b/configs/openpiton_riscv64_spl_defconfig
@@ -9,9 +9,10 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SPL_STACK=0x83fffe80
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x100000
 CONFIG_SPL_BSS_START_ADDR=0x82000000
+CONFIG_SYS_BOOTM_LEN=0x10000000
+CONFIG_SYS_LOAD_ADDR=0x87000000
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x87000000
 CONFIG_SPL_PAYLOAD=""
 CONFIG_TARGET_OPENPITON_RISCV64=y
 CONFIG_NR_CPUS=32
@@ -21,8 +22,8 @@ CONFIG_RISCV_SMODE=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 # CONFIG_EXPERT is not set
+# CONFIG_EFI_LOADER is not set
 # CONFIG_LEGACY_IMAGE_FORMAT is not set
-CONFIG_SYS_BOOTM_LEN=0x10000000
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="fdt addr ${fdtcontroladdr}; fdt move ${fdtcontroladdr} ${fdt_addr_r}; load mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} ${image}; booti ${kernel_addr_r} - ${fdt_addr_r}; "
@@ -91,8 +92,6 @@ CONFIG_SYS_NS16550=y
 CONFIG_FS_SQUASHFS=y
 # CONFIG_RANDOM_UUID is not set
 CONFIG_SPL_TINY_MEMSET=y
-CONFIG_SHA1=y
 CONFIG_SHA256=y
 CONFIG_MD5=y
 CONFIG_GETOPT=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig
index 057dd28dffd..708bf5eefd0 100644
--- a/configs/openrd_base_defconfig
+++ b/configs/openrd_base_defconfig
@@ -12,8 +12,8 @@ CONFIG_TARGET_OPENRD=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-openrd-base"
-CONFIG_IDENT_STRING="\nOpenRD-Base"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nOpenRD-Base"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=524288
diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig
index 05e4292764f..82a9c77761c 100644
--- a/configs/openrd_client_defconfig
+++ b/configs/openrd_client_defconfig
@@ -13,8 +13,8 @@ CONFIG_BOARD_IS_OPENRD_CLIENT=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-openrd-client"
-CONFIG_IDENT_STRING="\nOpenRD-Client"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nOpenRD-Client"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=524288
diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig
index 6e13c6eabdd..10b46e2ec18 100644
--- a/configs/openrd_ultimate_defconfig
+++ b/configs/openrd_ultimate_defconfig
@@ -13,8 +13,8 @@ CONFIG_BOARD_IS_OPENRD_ULTIMATE=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-openrd-ultimate"
-CONFIG_IDENT_STRING="\nOpenRD-Ultimate"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nOpenRD-Ultimate"
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=524288
diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig
index 7d21a6fe93c..2b06de5d4c6 100644
--- a/configs/opos6uldev_defconfig
+++ b/configs/opos6uldev_defconfig
@@ -21,6 +21,7 @@ CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x180000
 CONFIG_SPL_LIBDISK_SUPPORT=y
 # CONFIG_CMD_BMODE is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
@@ -123,4 +124,3 @@ CONFIG_BMP_16BPP=y
 CONFIG_BMP_24BPP=y
 CONFIG_BMP_32BPP=y
 CONFIG_IMX_WATCHDOG=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/orangepi-3b-rk3566_defconfig b/configs/orangepi-3b-rk3566_defconfig
index 575dc4340d3..2181c9caf58 100644
--- a/configs/orangepi-3b-rk3566_defconfig
+++ b/configs/orangepi-3b-rk3566_defconfig
@@ -10,11 +10,12 @@ CONFIG_ROCKCHIP_RK3568=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_ORANGEPI_3B_RK3566=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=4
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -66,7 +67,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=4
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_XMC=y
diff --git a/configs/orangepi-5-plus-rk3588_defconfig b/configs/orangepi-5-plus-rk3588_defconfig
index 138a633f320..9050fceda45 100644
--- a/configs/orangepi-5-plus-rk3588_defconfig
+++ b/configs/orangepi-5-plus-rk3588_defconfig
@@ -10,11 +10,12 @@ CONFIG_ROCKCHIP_RK3588=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_EVB_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=5
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -59,7 +60,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=5
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_XMC=y
 CONFIG_PHYLIB=y
diff --git a/configs/orangepi-5-rk3588s_defconfig b/configs/orangepi-5-rk3588s_defconfig
index 33529d4cac3..6e2ff7d338a 100644
--- a/configs/orangepi-5-rk3588s_defconfig
+++ b/configs/orangepi-5-rk3588s_defconfig
@@ -9,11 +9,12 @@ CONFIG_ROCKCHIP_RK3588=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_EVB_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=5
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -55,7 +56,6 @@ CONFIG_MISC=y
 CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=5
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_XMC=y
 CONFIG_PHY_MOTORCOMM=y
diff --git a/configs/orangepi-r1-plus-lts-rk3328_defconfig b/configs/orangepi-r1-plus-lts-rk3328_defconfig
index 14cdbd813c8..8b05aa23e5f 100644
--- a/configs/orangepi-r1-plus-lts-rk3328_defconfig
+++ b/configs/orangepi-r1-plus-lts-rk3328_defconfig
@@ -10,11 +10,11 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3328-orangepi-r1-plus-lts"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/orangepi-r1-plus-rk3328_defconfig b/configs/orangepi-r1-plus-rk3328_defconfig
index 7fe58e7a146..05f19240b24 100644
--- a/configs/orangepi-r1-plus-rk3328_defconfig
+++ b/configs/orangepi-r1-plus-rk3328_defconfig
@@ -10,11 +10,11 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3328-orangepi-r1-plus"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
index 5dfbdeaf17f..fdf3d698939 100644
--- a/configs/orangepi-rk3399_defconfig
+++ b/configs/orangepi-rk3399_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-orangepi"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/origen_defconfig b/configs/origen_defconfig
index dc9285d4e99..9fd7bc103c7 100644
--- a/configs/origen_defconfig
+++ b/configs/origen_defconfig
@@ -16,10 +16,10 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_DEFAULT_DEVICE_TREE="exynos4210-origen"
 CONFIG_SPL_TEXT_BASE=0x02021410
 CONFIG_SYS_MONITOR_LEN=262144
+CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_SPL=y
 CONFIG_IDENT_STRING=" for ORIGEN"
 CONFIG_SYS_MEM_TOP_HIDE=0x100000
-CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTCOMMAND="if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootenv; then echo Loaded environment from ${bootenv};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;if run loadbootscript; then run bootscript; fi; fi;load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} "
 CONFIG_SYS_PBSIZE=1024
diff --git a/configs/p200_defconfig b/configs/p200_defconfig
index b6946034795..36e76d890e5 100644
--- a/configs/p200_defconfig
+++ b/configs/p200_defconfig
@@ -9,10 +9,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxbb-p200"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" p200"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/p201_defconfig b/configs/p201_defconfig
index dcc1454be16..5df5f01cbce 100644
--- a/configs/p201_defconfig
+++ b/configs/p201_defconfig
@@ -10,10 +10,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxbb-p201"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" p201"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/p212_defconfig b/configs/p212_defconfig
index 9cf22ca4db7..1c45e3d3923 100644
--- a/configs/p212_defconfig
+++ b/configs/p212_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905x-p212"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXL=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" p212"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/p2371-0000_defconfig b/configs/p2371-0000_defconfig
index 86a3c4a93c0..93e1846a883 100644
--- a/configs/p2371-0000_defconfig
+++ b/configs/p2371-0000_defconfig
@@ -8,10 +8,10 @@ CONFIG_SF_DEFAULT_SPEED=24000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2371-0000"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x80080000
 CONFIG_TEGRA210=y
 CONFIG_TEGRA_GPU=y
-CONFIG_SYS_LOAD_ADDR=0x80080000
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2089
 CONFIG_CONSOLE_MUX=y
diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig
index 50417aead65..1c6fe537d61 100644
--- a/configs/p2371-2180_defconfig
+++ b/configs/p2371-2180_defconfig
@@ -10,12 +10,12 @@ CONFIG_SF_DEFAULT_SPEED=24000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2371-2180"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x80080000
 CONFIG_TEGRA210=y
 CONFIG_TARGET_P2371_2180=y
 CONFIG_TEGRA_GPU=y
-CONFIG_SYS_LOAD_ADDR=0x80080000
 CONFIG_PCI=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2089
diff --git a/configs/p2571_defconfig b/configs/p2571_defconfig
index a3445c3207b..b2485423e1e 100644
--- a/configs/p2571_defconfig
+++ b/configs/p2571_defconfig
@@ -8,11 +8,11 @@ CONFIG_SF_DEFAULT_SPEED=24000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2571"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x80080000
 CONFIG_TEGRA210=y
 CONFIG_TARGET_P2571=y
 CONFIG_TEGRA_GPU=y
-CONFIG_SYS_LOAD_ADDR=0x80080000
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2084
 CONFIG_CONSOLE_MUX=y
diff --git a/configs/p2771-0000-000_defconfig b/configs/p2771-0000-000_defconfig
index 83e904b4dec..3554ba6a720 100644
--- a/configs/p2771-0000-000_defconfig
+++ b/configs/p2771-0000-000_defconfig
@@ -8,10 +8,10 @@ CONFIG_NR_DRAM_BANKS=1026
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-000"
-CONFIG_TEGRA186=y
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_LOAD_ADDR=0x80080000
+CONFIG_TEGRA186=y
 CONFIG_PCI=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2093
diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig
index 298f8faaab5..4553d707699 100644
--- a/configs/p2771-0000-500_defconfig
+++ b/configs/p2771-0000-500_defconfig
@@ -8,10 +8,10 @@ CONFIG_NR_DRAM_BANKS=1026
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-500"
-CONFIG_TEGRA186=y
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_LOAD_ADDR=0x80080000
+CONFIG_TEGRA186=y
 CONFIG_PCI=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2093
diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig
index 67bc3f4bb02..ac7ed8e10fc 100644
--- a/configs/p3450-0000_defconfig
+++ b/configs/p3450-0000_defconfig
@@ -11,12 +11,12 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="tegra210-p3450-0000"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x80080000
 CONFIG_TEGRA210=y
 CONFIG_TARGET_P3450_0000=y
 CONFIG_TEGRA_GPU=y
-CONFIG_SYS_LOAD_ADDR=0x80080000
 CONFIG_PCI=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2089
diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig
index 97c7977c19a..57b4332ed79 100644
--- a/configs/paz00_defconfig
+++ b/configs/paz00_defconfig
@@ -8,9 +8,9 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra20-paz00"
 CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_PAZ00=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2087
 CONFIG_SPL_FOOTPRINT_LIMIT=y
diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig
index 46a04bb2068..8986f0ca397 100644
--- a/configs/pcm052_defconfig
+++ b/configs/pcm052_defconfig
@@ -10,13 +10,14 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xA0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="vf610-pcm052"
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_ENV_OFFSET_REDUND=0xC0000
 CONFIG_TARGET_PCM052=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_SYS_MEMTEST_START=0x80010000
 CONFIG_SYS_MEMTEST_END=0x87c00000
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=520192
+# CONFIG_EFI_LOADER is not set
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run bootcmd_nand"
@@ -75,4 +76,3 @@ CONFIG_FSL_LPUART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/pe2201_defconfig b/configs/pe2201_defconfig
index 5d32cbf8bf1..c28ceac0d45 100644
--- a/configs/pe2201_defconfig
+++ b/configs/pe2201_defconfig
@@ -8,8 +8,8 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x30c1a000
 CONFIG_ENV_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="phytium-pe2201"
-# CONFIG_PSCI_RESET is not set
 CONFIG_SYS_LOAD_ADDR=0x90000000
+# CONFIG_PSCI_RESET is not set
 CONFIG_PCI=y
 CONFIG_AHCI=y
 CONFIG_BOOTSTD_DEFAULTS=y
diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig
index 27d438efb79..594af5136e3 100644
--- a/configs/peach-pi_defconfig
+++ b/configs/peach-pi_defconfig
@@ -17,9 +17,9 @@ CONFIG_ENV_OFFSET=0x3FC000
 CONFIG_ENV_SECT_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="exynos5800-peach-pi"
 CONFIG_SPL_TEXT_BASE=0x02024410
+CONFIG_SYS_LOAD_ADDR=0x23e00000
 CONFIG_SPL=y
 CONFIG_IDENT_STRING=" for Peach-Pi"
-CONFIG_SYS_LOAD_ADDR=0x23e00000
 CONFIG_FIT=y
 CONFIG_FIT_BEST_MATCH=y
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig
index 1c7e0114a85..2b34c25556a 100644
--- a/configs/peach-pit_defconfig
+++ b/configs/peach-pit_defconfig
@@ -16,9 +16,9 @@ CONFIG_ENV_OFFSET=0x3FC000
 CONFIG_ENV_SECT_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="exynos5420-peach-pit"
 CONFIG_SPL_TEXT_BASE=0x02024410
+CONFIG_SYS_LOAD_ADDR=0x23e00000
 CONFIG_SPL=y
 CONFIG_IDENT_STRING=" for Peach-Pit"
-CONFIG_SYS_LOAD_ADDR=0x23e00000
 CONFIG_FIT=y
 CONFIG_FIT_BEST_MATCH=y
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig
index 2f3ff9ac9c5..6f767798677 100644
--- a/configs/pg_wcom_expu1_defconfig
+++ b/configs/pg_wcom_expu1_defconfig
@@ -13,9 +13,10 @@ CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1"
 CONFIG_SYS_MONITOR_LEN=1048576
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_SYS_CLK_FREQ=66666666
 # CONFIG_HAS_ARMV7_SECURE_BASE is not set
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_ENV_ADDR=0x60060000
 # CONFIG_DEEP_SLEEP is not set
 CONFIG_LAYERSCAPE_NS_ACCESS=y
@@ -26,9 +27,9 @@ CONFIG_PG_WCOM_UBOOT_BOOTPACKAGE=y
 CONFIG_PG_WCOM_UBOOT_UPDATE_TEXT_BASE=0x60240000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
@@ -104,6 +105,4 @@ CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_LZO=y
-# CONFIG_EFI_LOADER is not set
 CONFIG_POST=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig
index d7ab3c86fd6..9030d69a04d 100644
--- a/configs/pg_wcom_expu1_update_defconfig
+++ b/configs/pg_wcom_expu1_update_defconfig
@@ -13,8 +13,9 @@ CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1"
 CONFIG_SYS_MONITOR_LEN=1048576
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
-# CONFIG_HAS_ARMV7_SECURE_BASE is not set
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_ENV_ADDR=0x60220000
 # CONFIG_DEEP_SLEEP is not set
 CONFIG_LAYERSCAPE_NS_ACCESS=y
@@ -24,9 +25,9 @@ CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y
 CONFIG_PG_WCOM_UBOOT_UPDATE=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
@@ -102,6 +103,4 @@ CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_LZO=y
-# CONFIG_EFI_LOADER is not set
 CONFIG_POST=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig
index bd3ac2e18ac..5b9dafd9af9 100644
--- a/configs/pg_wcom_seli8_defconfig
+++ b/configs/pg_wcom_seli8_defconfig
@@ -13,9 +13,10 @@ CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8"
 CONFIG_SYS_MONITOR_LEN=1048576
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_SYS_CLK_FREQ=66666666
 # CONFIG_HAS_ARMV7_SECURE_BASE is not set
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_ENV_ADDR=0x60060000
 # CONFIG_DEEP_SLEEP is not set
 CONFIG_LAYERSCAPE_NS_ACCESS=y
@@ -26,9 +27,9 @@ CONFIG_PG_WCOM_UBOOT_BOOTPACKAGE=y
 CONFIG_PG_WCOM_UBOOT_UPDATE_TEXT_BASE=0x60240000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
@@ -104,6 +105,4 @@ CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_LZO=y
-# CONFIG_EFI_LOADER is not set
 CONFIG_POST=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/pg_wcom_seli8_update_defconfig b/configs/pg_wcom_seli8_update_defconfig
index 733050110b1..63d13e860dc 100644
--- a/configs/pg_wcom_seli8_update_defconfig
+++ b/configs/pg_wcom_seli8_update_defconfig
@@ -13,8 +13,9 @@ CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8"
 CONFIG_SYS_MONITOR_LEN=1048576
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
-# CONFIG_HAS_ARMV7_SECURE_BASE is not set
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x82000000
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_ENV_ADDR=0x60220000
 # CONFIG_DEEP_SLEEP is not set
 CONFIG_LAYERSCAPE_NS_ACCESS=y
@@ -24,9 +25,9 @@ CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y
 CONFIG_PG_WCOM_UBOOT_UPDATE=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
@@ -102,6 +103,4 @@ CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_LZO=y
-# CONFIG_EFI_LOADER is not set
 CONFIG_POST=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/phycore-am335x-r2-regor_defconfig b/configs/phycore-am335x-r2-regor_defconfig
index d5056ccd98e..819482a7e87 100644
--- a/configs/phycore-am335x-r2-regor_defconfig
+++ b/configs/phycore-am335x-r2-regor_defconfig
@@ -15,6 +15,7 @@ CONFIG_SPL=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_PAYLOAD="u-boot.img"
+# CONFIG_EFI_LOADER is not set
 # CONFIG_FIT is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_FDT_FIXUP_PARTITIONS=y
@@ -90,4 +91,3 @@ CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETHER=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/phycore-am335x-r2-wega_defconfig b/configs/phycore-am335x-r2-wega_defconfig
index 5813d102475..0d5373b723a 100644
--- a/configs/phycore-am335x-r2-wega_defconfig
+++ b/configs/phycore-am335x-r2-wega_defconfig
@@ -15,6 +15,7 @@ CONFIG_SPL=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_PAYLOAD="u-boot.img"
+# CONFIG_EFI_LOADER is not set
 # CONFIG_FIT is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_FDT_FIXUP_PARTITIONS=y
@@ -91,4 +92,3 @@ CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETHER=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 61a3ead9b15..48a0c0b8b4e 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -21,9 +21,10 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SF_DEFAULT_BUS=3
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3E0000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_PCI=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
@@ -41,7 +42,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
@@ -101,7 +101,6 @@ CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=3
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index b63a96fff14..1240c7fcbd0 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -24,11 +24,11 @@ CONFIG_SPL_STACK=0x960000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x98fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3e0000
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
@@ -50,7 +50,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 # CONFIG_SPL_CRYPTO is not set
 CONFIG_SPL_I2C=y
diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig
index 87b259b71db..c7d5b73ea93 100644
--- a/configs/phycore-rk3288_defconfig
+++ b/configs/phycore-rk3288_defconfig
@@ -18,13 +18,13 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_LTO=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-phycore-rdk.dtb"
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/phycore_am62x_a53_defconfig b/configs/phycore_am62x_a53_defconfig
index 67f89e03fbf..dfff58670a0 100644
--- a/configs/phycore_am62x_a53_defconfig
+++ b/configs/phycore_am62x_a53_defconfig
@@ -26,6 +26,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80c80000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SPL_SIZE_LIMIT=0x40000
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800
 CONFIG_ENV_OFFSET_REDUND=0x6c0000
@@ -38,7 +39,6 @@ CONFIG_SPL_SPI=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 CONFIG_BOOTSTD_FULL=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTCOMMAND="run ${boot}boot; bootflow scan -lb"
 CONFIG_DEFAULT_FDT_FILE="oftree"
@@ -48,7 +48,6 @@ CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
@@ -56,7 +55,6 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
diff --git a/configs/phycore_am62x_r5_defconfig b/configs/phycore_am62x_r5_defconfig
index 7fc3abf1262..3ffb269a58e 100644
--- a/configs/phycore_am62x_r5_defconfig
+++ b/configs/phycore_am62x_r5_defconfig
@@ -49,14 +49,12 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/phycore_am64x_a53_defconfig b/configs/phycore_am64x_a53_defconfig
index 3bfe8761309..662fc708d0d 100644
--- a/configs/phycore_am64x_a53_defconfig
+++ b/configs/phycore_am64x_a53_defconfig
@@ -47,7 +47,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -59,7 +58,6 @@ CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_NET=y
 CONFIG_SPL_NET_VCI_STRING="AM64X U-Boot A53 SPL"
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
diff --git a/configs/phycore_am64x_r5_defconfig b/configs/phycore_am64x_r5_defconfig
index 72d10f76647..269efdfcfc1 100644
--- a/configs/phycore_am64x_r5_defconfig
+++ b/configs/phycore_am64x_r5_defconfig
@@ -34,8 +34,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run distro_bootcmd"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
@@ -50,7 +48,6 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -62,7 +59,6 @@ CONFIG_SPL_NET=y
 CONFIG_SPL_NET_VCI_STRING="AM64X U-Boot R5 SPL"
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
diff --git a/configs/pico-imx8mq_defconfig b/configs/pico-imx8mq_defconfig
index ef876abbd36..2960440f802 100644
--- a/configs/pico-imx8mq_defconfig
+++ b/configs/pico-imx8mq_defconfig
@@ -23,14 +23,14 @@ CONFIG_SPL_STACK=0x187ff0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x180000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x8000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x8000000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
@@ -44,7 +44,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
index 5d3e32f9108..dfa927ccb17 100644
--- a/configs/pinebook-pro-rk3399_defconfig
+++ b/configs/pinebook-pro-rk3399_defconfig
@@ -12,11 +12,12 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_PINEBOOK_PRO_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
@@ -64,7 +65,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_SILICONKAISER=y
diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig
index 0eade88068f..5e16749ba7d 100644
--- a/configs/pinephone-pro-rk3399_defconfig
+++ b/configs/pinephone-pro-rk3399_defconfig
@@ -11,11 +11,12 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_PINEPHONE_PRO_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -52,7 +53,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_SILICONKAISER=y
diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig
index 2d075d12174..45e63b42d19 100644
--- a/configs/pinetab2-rk3566_defconfig
+++ b/configs/pinetab2-rk3566_defconfig
@@ -11,11 +11,12 @@ CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_QUARTZ64_RK3566=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=4
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -66,7 +67,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=4
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SILICONKAISER=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig
index e92e4123f79..8c43d9d0efa 100644
--- a/configs/plutux_defconfig
+++ b/configs/plutux_defconfig
@@ -8,10 +8,10 @@ CONFIG_ENV_OFFSET=0x1FFE0000
 CONFIG_DEFAULT_DEVICE_TREE="tegra20-plutux"
 CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_PLUTUX=y
 CONFIG_TEGRA_ENABLE_UARTD=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2084
diff --git a/configs/pm9g45_defconfig b/configs/pm9g45_defconfig
index 169673c6494..20aa3512de5 100644
--- a/configs/pm9g45_defconfig
+++ b/configs/pm9g45_defconfig
@@ -11,10 +11,10 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70003f00
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x70000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x70000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig
index 880cb20b220..d81bf59f63d 100644
--- a/configs/pogo_e02_defconfig
+++ b/configs/pogo_e02_defconfig
@@ -14,8 +14,8 @@ CONFIG_TARGET_POGO_E02=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-pogo_e02"
-CONFIG_IDENT_STRING="\nPogo E02"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nPogo E02"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs $(bootargs_console); run bootcmd_usb; bootm 0x00800000 0x01100000"
diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig
index 50046e83b77..66cfaaeea2c 100644
--- a/configs/pogo_v4_defconfig
+++ b/configs/pogo_v4_defconfig
@@ -13,8 +13,8 @@ CONFIG_TARGET_POGO_V4=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-pogoplug-series-4"
-CONFIG_IDENT_STRING="\nPogoplug V4"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nPogoplug V4"
 CONFIG_PCI=y
 CONFIG_LTO=y
 CONFIG_BOOTSTD_FULL=y
diff --git a/configs/poleg_evb_defconfig b/configs/poleg_evb_defconfig
index 99c6d69d6b7..74f4092d288 100644
--- a/configs/poleg_evb_defconfig
+++ b/configs/poleg_evb_defconfig
@@ -14,8 +14,8 @@ CONFIG_ENV_SECT_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="nuvoton-npcm750-evb"
 CONFIG_DM_RESET=y
-CONFIG_TARGET_POLEG=y
 CONFIG_SYS_LOAD_ADDR=0x10000000
+CONFIG_TARGET_POLEG=y
 CONFIG_ENV_ADDR=0x80100000
 CONFIG_FIT=y
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/pomelo_defconfig b/configs/pomelo_defconfig
index 2dbf4e6b534..b963886d2ef 100644
--- a/configs/pomelo_defconfig
+++ b/configs/pomelo_defconfig
@@ -7,9 +7,9 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2981a000
 CONFIG_DEFAULT_DEVICE_TREE="phytium-pomelo"
+CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_SYS_LOAD_ADDR=0x90000000
 CONFIG_SYS_PCI_64BIT=y
-CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 earlycon=pl011,0x28001000 root=/dev/sda2 rw"
diff --git a/configs/poplar_defconfig b/configs/poplar_defconfig
index c24500d261f..24732ad4026 100644
--- a/configs/poplar_defconfig
+++ b/configs/poplar_defconfig
@@ -9,8 +9,8 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x200000
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x1F0000
 CONFIG_DEFAULT_DEVICE_TREE="hi3798cv200-poplar"
-CONFIG_IDENT_STRING="poplar"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="poplar"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_CBSIZE=512
 CONFIG_SYS_PBSIZE=537
diff --git a/configs/popmetal-rk3288_defconfig b/configs/popmetal-rk3288_defconfig
index 92f93f6503b..fe16850c940 100644
--- a/configs/popmetal-rk3288_defconfig
+++ b/configs/popmetal-rk3288_defconfig
@@ -18,12 +18,12 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-popmetal.dtb"
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/porter_defconfig b/configs/porter_defconfig
index 170ca3a5f43..77844afc617 100644
--- a/configs/porter_defconfig
+++ b/configs/porter_defconfig
@@ -25,12 +25,13 @@ CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0xe6340000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_ENV_ADDR=0xC0000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CBSIZE=256
@@ -40,7 +41,6 @@ CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000
@@ -105,4 +105,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/powkiddy-x55-rk3566_defconfig b/configs/powkiddy-x55-rk3566_defconfig
index 2360bdbe84b..85280839889 100644
--- a/configs/powkiddy-x55-rk3566_defconfig
+++ b/configs/powkiddy-x55-rk3566_defconfig
@@ -5,9 +5,9 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-powkiddy-x55"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index ccc7f355dbd..67c0ee72c92 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -12,11 +12,12 @@ CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_PUMA_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF180000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
 CONFIG_CONSOLE_MUX=y
@@ -68,7 +69,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_ANEG_TIMEOUT=30000
diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig
index 3d44c018c99..97a6d45f39b 100644
--- a/configs/px30-core-ctouch2-of10-px30_defconfig
+++ b/configs/px30-core-ctouch2-of10-px30_defconfig
@@ -11,9 +11,9 @@ CONFIG_TARGET_PX30_CORE=y
 CONFIG_DEBUG_UART_CHANNEL=1
 # CONFIG_TPL_LIBCOMMON_SUPPORT is not set
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF160000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig
index 7a655988a89..0d20546a746 100644
--- a/configs/px30-core-ctouch2-px30_defconfig
+++ b/configs/px30-core-ctouch2-px30_defconfig
@@ -11,9 +11,9 @@ CONFIG_TARGET_PX30_CORE=y
 CONFIG_DEBUG_UART_CHANNEL=1
 # CONFIG_TPL_LIBCOMMON_SUPPORT is not set
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF160000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/px30-core-edimm2.2-px30_defconfig b/configs/px30-core-edimm2.2-px30_defconfig
index 0c80f40dcfc..6d7ec8f3598 100644
--- a/configs/px30-core-edimm2.2-px30_defconfig
+++ b/configs/px30-core-edimm2.2-px30_defconfig
@@ -11,9 +11,9 @@ CONFIG_TARGET_PX30_CORE=y
 CONFIG_DEBUG_UART_CHANNEL=1
 # CONFIG_TPL_LIBCOMMON_SUPPORT is not set
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF160000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig
index 30946b8f6b4..1211c5c019f 100644
--- a/configs/pxm2_defconfig
+++ b/configs/pxm2_defconfig
@@ -16,12 +16,12 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SPL_BSS_START_ADDR=0x80000000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_SPL=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/qc750_defconfig b/configs/qc750_defconfig
index 17b5ec88248..d0b07ee07c4 100644
--- a/configs/qc750_defconfig
+++ b/configs/qc750_defconfig
@@ -10,11 +10,11 @@ CONFIG_ENV_OFFSET=0xFFFFD000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-wexler-qc750"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_QC750=y
 CONFIG_TEGRA_ENABLE_UARTD=y
 CONFIG_CMD_EBTUPDATE=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
index 2a2253f766d..ea0dd3e5801 100644
--- a/configs/qcom_defconfig
+++ b/configs/qcom_defconfig
@@ -45,12 +45,13 @@ CONFIG_CLK_QCOM_APQ8016=y
 CONFIG_CLK_QCOM_APQ8096=y
 CONFIG_CLK_QCOM_QCM2290=y
 CONFIG_CLK_QCOM_QCS404=y
-CONFIG_CLK_QCOM_SC7280=y
 CONFIG_CLK_QCOM_SDM845=y
 CONFIG_CLK_QCOM_SM6115=y
+CONFIG_CLK_QCOM_SM8150=y
 CONFIG_CLK_QCOM_SM8250=y
 CONFIG_CLK_QCOM_SM8550=y
 CONFIG_CLK_QCOM_SM8650=y
+CONFIG_CLK_QCOM_SC7280=y
 CONFIG_MSM_GPIO=y
 CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_DM_I2C=y
@@ -86,6 +87,7 @@ CONFIG_PINCTRL_QCOM_QCM2290=y
 CONFIG_PINCTRL_QCOM_QCS404=y
 CONFIG_PINCTRL_QCOM_SDM845=y
 CONFIG_PINCTRL_QCOM_SM6115=y
+CONFIG_PINCTRL_QCOM_SM8150=y
 CONFIG_PINCTRL_QCOM_SM8250=y
 CONFIG_PINCTRL_QCOM_SM8550=y
 CONFIG_PINCTRL_QCOM_SM8650=y
diff --git a/configs/qemu-riscv32_defconfig b/configs/qemu-riscv32_defconfig
index 80d724685cb..1cd80f5769e 100644
--- a/configs/qemu-riscv32_defconfig
+++ b/configs/qemu-riscv32_defconfig
@@ -6,10 +6,10 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="qemu-virt32"
 CONFIG_SYS_MONITOR_LEN=786432
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x80200000
 CONFIG_TARGET_QEMU_VIRT=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
diff --git a/configs/qemu-riscv32_smode_defconfig b/configs/qemu-riscv32_smode_defconfig
index ad349fc5af8..6f871c83644 100644
--- a/configs/qemu-riscv32_smode_defconfig
+++ b/configs/qemu-riscv32_smode_defconfig
@@ -6,11 +6,11 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="qemu-virt32"
 CONFIG_SYS_MONITOR_LEN=786432
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x80200000
 CONFIG_TARGET_QEMU_VIRT=y
 CONFIG_RISCV_SMODE=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig
index dd774a0259a..9906f8b2dad 100644
--- a/configs/qemu-riscv32_spl_defconfig
+++ b/configs/qemu-riscv32_spl_defconfig
@@ -7,14 +7,14 @@ CONFIG_ENV_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="qemu-virt32"
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_BSS_START_ADDR=0x84000000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x80200000
+CONFIG_SPL=y
 CONFIG_TARGET_QEMU_VIRT=y
 CONFIG_RISCV_SMODE=y
 # CONFIG_OF_BOARD_FIXUP is not set
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig
index b8ccf8f46bd..cdd511b0e72 100644
--- a/configs/qemu-riscv64_defconfig
+++ b/configs/qemu-riscv64_defconfig
@@ -5,11 +5,11 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="qemu-virt64"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x80200000
 CONFIG_TARGET_QEMU_VIRT=y
 CONFIG_ARCH_RV64I=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig
index 6baad1de38c..2f62f17bc8c 100644
--- a/configs/qemu-riscv64_smode_defconfig
+++ b/configs/qemu-riscv64_smode_defconfig
@@ -5,12 +5,12 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="qemu-virt64"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x80200000
 CONFIG_TARGET_QEMU_VIRT=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr};"
diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig
index 220b5fed6ae..27e092bd208 100644
--- a/configs/qemu-riscv64_spl_defconfig
+++ b/configs/qemu-riscv64_spl_defconfig
@@ -6,14 +6,14 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="qemu-virt64"
 CONFIG_SPL_BSS_START_ADDR=0x84000000
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x80200000
+CONFIG_SPL=y
 CONFIG_TARGET_QEMU_VIRT=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
diff --git a/configs/qemu-xtensa-dc233c_defconfig b/configs/qemu-xtensa-dc233c_defconfig
index e6f40b37ed8..9fc74bc48e7 100644
--- a/configs/qemu-xtensa-dc233c_defconfig
+++ b/configs/qemu-xtensa-dc233c_defconfig
@@ -7,7 +7,6 @@ CONFIG_DEFAULT_DEVICE_TREE="virt"
 CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_TARGET_QEMU_XTENSA=y
-CONFIG_REMAKE_ELF=y
 CONFIG_SYS_MONITOR_BASE=0xF6000000
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_SHOW_BOOT_PROGRESS=y
diff --git a/configs/qemu_arm64_defconfig b/configs/qemu_arm64_defconfig
index 088ba39f18e..827ab71d3a9 100644
--- a/configs/qemu_arm64_defconfig
+++ b/configs/qemu_arm64_defconfig
@@ -8,14 +8,15 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200000
 CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DEFAULT_DEVICE_TREE="qemu-arm64"
+CONFIG_SYS_LOAD_ADDR=0x40200000
 CONFIG_DEBUG_UART_BASE=0x9000000
 CONFIG_DEBUG_UART_CLOCK=0
 CONFIG_ARMV8_CRYPTO=y
-CONFIG_SYS_LOAD_ADDR=0x40200000
 CONFIG_ENV_ADDR=0x4000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
+CONFIG_EFI_HTTP_BOOT=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
@@ -69,4 +70,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_SEMIHOSTING=y
 CONFIG_TPM=y
-CONFIG_EFI_HTTP_BOOT=y
diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig
index 279125d65a3..d042aea49bb 100644
--- a/configs/qemu_arm_defconfig
+++ b/configs/qemu_arm_defconfig
@@ -9,10 +9,11 @@ CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DEFAULT_DEVICE_TREE="qemu-arm"
 CONFIG_TARGET_QEMU_ARM_32BIT=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x40200000
 CONFIG_DEBUG_UART_BASE=0x9000000
 CONFIG_DEBUG_UART_CLOCK=0
 CONFIG_ARMV7_LPAE=y
-CONFIG_SYS_LOAD_ADDR=0x40200000
 CONFIG_ENV_ADDR=0x4000000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
@@ -23,7 +24,6 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
 CONFIG_BOOTSTD_FULL=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/quartz64-a-rk3566_defconfig b/configs/quartz64-a-rk3566_defconfig
index 1ea8e0f40cc..fe3fa37611a 100644
--- a/configs/quartz64-a-rk3566_defconfig
+++ b/configs/quartz64-a-rk3566_defconfig
@@ -10,11 +10,12 @@ CONFIG_ROCKCHIP_RK3568=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_QUARTZ64_RK3566=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=4
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -62,7 +63,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=4
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_MACRONIX=y
diff --git a/configs/quartz64-b-rk3566_defconfig b/configs/quartz64-b-rk3566_defconfig
index f61b2c181a1..929736f76af 100644
--- a/configs/quartz64-b-rk3566_defconfig
+++ b/configs/quartz64-b-rk3566_defconfig
@@ -9,11 +9,12 @@ CONFIG_ROCKCHIP_RK3568=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_QUARTZ64_RK3566=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=4
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -60,7 +61,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=4
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_MACRONIX=y
diff --git a/configs/quartzpro64-rk3588_defconfig b/configs/quartzpro64-rk3588_defconfig
index 06c5cff3ca5..ade7be27e92 100644
--- a/configs/quartzpro64-rk3588_defconfig
+++ b/configs/quartzpro64-rk3588_defconfig
@@ -7,9 +7,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-quartzpro64"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_QUARTZPRO64_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig
index 1c876133c27..4a85ffbaaf6 100644
--- a/configs/r2dplus_defconfig
+++ b/configs/r2dplus_defconfig
@@ -6,8 +6,8 @@ CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DEFAULT_DEVICE_TREE="sh7751-r2dplus"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_SYS_CLK_FREQ=60000000
 CONFIG_SYS_LOAD_ADDR=0x8e000000
+CONFIG_SYS_CLK_FREQ=60000000
 CONFIG_ENV_ADDR=0xA0040000
 CONFIG_PCI=y
 CONFIG_TARGET_R2DPLUS=y
diff --git a/configs/r8a77970_eagle_defconfig b/configs/r8a77970_eagle_defconfig
index 9983dbd50eb..33484df1f54 100644
--- a/configs/r8a77970_eagle_defconfig
+++ b/configs/r8a77970_eagle_defconfig
@@ -20,6 +20,7 @@ CONFIG_SPL_BSS_START_ADDR=0xe631f000
 CONFIG_SPL_BSS_MAX_SIZE=0x1000
 CONFIG_SYS_LOAD_ADDR=0x58000000
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_USE_BOOTARGS=y
@@ -81,4 +82,3 @@ CONFIG_DM_SPI=y
 CONFIG_RENESAS_RPC_SPI=y
 CONFIG_TEE=y
 CONFIG_OPTEE=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/r8a779a0_falcon_defconfig b/configs/r8a779a0_falcon_defconfig
index 7dbd1457d87..ad53d8815b5 100644
--- a/configs/r8a779a0_falcon_defconfig
+++ b/configs/r8a779a0_falcon_defconfig
@@ -12,10 +12,10 @@ CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a779a0-falcon"
 CONFIG_RCAR_GEN4=y
 CONFIG_TARGET_FALCON=y
 CONFIG_SYS_MONITOR_LEN=1048576
+CONFIG_SYS_LOAD_ADDR=0x58000000
 CONFIG_SYS_CLK_FREQ=16666666
 # CONFIG_PSCI_RESET is not set
 CONFIG_ARMV8_PSCI=y
-CONFIG_SYS_LOAD_ADDR=0x58000000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
diff --git a/configs/r8a779f0_spider_defconfig b/configs/r8a779f0_spider_defconfig
index e822e95eb81..1959abc3c32 100644
--- a/configs/r8a779f0_spider_defconfig
+++ b/configs/r8a779f0_spider_defconfig
@@ -10,9 +10,9 @@ CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a779f0-spider"
 CONFIG_RCAR_GEN4=y
 CONFIG_TARGET_SPIDER=y
 CONFIG_SYS_MONITOR_LEN=1048576
+CONFIG_SYS_LOAD_ADDR=0x58000000
 CONFIG_SYS_CLK_FREQ=20000000
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x58000000
 CONFIG_SYS_BOOT_GET_CMDLINE=y
 CONFIG_SYS_BARGSIZE=2048
 CONFIG_REMAKE_ELF=y
diff --git a/configs/r8a779g0_whitehawk_defconfig b/configs/r8a779g0_whitehawk_defconfig
index a0abc45b72a..ba7abb93dff 100644
--- a/configs/r8a779g0_whitehawk_defconfig
+++ b/configs/r8a779g0_whitehawk_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a779g0-white-hawk"
 CONFIG_RCAR_GEN4=y
 CONFIG_TARGET_WHITEHAWK=y
 CONFIG_SYS_MONITOR_LEN=1048576
+CONFIG_SYS_LOAD_ADDR=0x58000000
 CONFIG_SYS_CLK_FREQ=16666666
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x58000000
 CONFIG_SYS_BOOT_GET_CMDLINE=y
 CONFIG_SYS_BARGSIZE=2048
 CONFIG_REMAKE_ELF=y
diff --git a/configs/r8a779h0_grayhawk_defconfig b/configs/r8a779h0_grayhawk_defconfig
index 6cbe27a316d..73dd62eb539 100644
--- a/configs/r8a779h0_grayhawk_defconfig
+++ b/configs/r8a779h0_grayhawk_defconfig
@@ -9,9 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a779h0-gray-hawk-single"
 CONFIG_RCAR_GEN4=y
 CONFIG_TARGET_GRAYHAWK=y
 CONFIG_SYS_MONITOR_LEN=1048576
+CONFIG_SYS_LOAD_ADDR=0x58000000
 CONFIG_SYS_CLK_FREQ=16666666
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x58000000
 CONFIG_SYS_BOOT_GET_CMDLINE=y
 CONFIG_SYS_BARGSIZE=2048
 CONFIG_REMAKE_ELF=y
diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig
index 48c8fcf5a66..f60bebaa4ae 100644
--- a/configs/radxa-cm3-io-rk3566_defconfig
+++ b/configs/radxa-cm3-io-rk3566_defconfig
@@ -5,9 +5,9 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-radxa-cm3-io"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/radxa-e25-rk3568_defconfig b/configs/radxa-e25-rk3568_defconfig
index 496fee0e0a4..99f9e1c899c 100644
--- a/configs/radxa-e25-rk3568_defconfig
+++ b/configs/radxa-e25-rk3568_defconfig
@@ -6,9 +6,9 @@ CONFIG_ARCH_ROCKCHIP=y
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-radxa-e25"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/radxa-zero-3-rk3566_defconfig b/configs/radxa-zero-3-rk3566_defconfig
index 7606edf393e..5989b07ad79 100644
--- a/configs/radxa-zero-3-rk3566_defconfig
+++ b/configs/radxa-zero-3-rk3566_defconfig
@@ -7,9 +7,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-radxa-zero-3w"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_RADXA_ZERO_3_RK3566=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/radxa-zero2_defconfig b/configs/radxa-zero2_defconfig
index 92e0a8833cc..c1f5d405877 100644
--- a/configs/radxa-zero2_defconfig
+++ b/configs/radxa-zero2_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12b-radxa-zero2"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" radxa-zero2"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/radxa-zero_defconfig b/configs/radxa-zero_defconfig
index 5179c58dadc..82db167e071 100644
--- a/configs/radxa-zero_defconfig
+++ b/configs/radxa-zero_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12a-radxa-zero"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" radxa-zero"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/rcar3_salvator-x_defconfig b/configs/rcar3_salvator-x_defconfig
index 318a9ab03e6..b33b8fe4b4a 100644
--- a/configs/rcar3_salvator-x_defconfig
+++ b/configs/rcar3_salvator-x_defconfig
@@ -19,6 +19,7 @@ CONFIG_SYS_LOAD_ADDR=0x58000000
 CONFIG_PCI=y
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_MONITOR_BASE=0x00000000
+# CONFIG_EFI_UNICODE_CAPITALIZATION is not set
 CONFIG_FIT=y
 # CONFIG_BOOTSTD is not set
 CONFIG_SUPPORT_RAW_INITRD=y
@@ -115,4 +116,3 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
 CONFIG_USB_STORAGE=y
-# CONFIG_EFI_UNICODE_CAPITALIZATION is not set
diff --git a/configs/ringneck-px30_defconfig b/configs/ringneck-px30_defconfig
index 52a4c9710a9..324581b4082 100644
--- a/configs/ringneck-px30_defconfig
+++ b/configs/ringneck-px30_defconfig
@@ -11,10 +11,11 @@ CONFIG_ROCKCHIP_PX30=y
 CONFIG_TARGET_RINGNECK_PX30=y
 # CONFIG_TPL_LIBCOMMON_SUPPORT is not set
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF030000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_FIT_SIGNATURE=y
@@ -117,4 +118,3 @@ CONFIG_TPL_TINY_MEMSET=y
 # CONFIG_RSA is not set
 CONFIG_LZO=y
 CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/roc-cc-rk3308_defconfig b/configs/roc-cc-rk3308_defconfig
index b1b59d9cb5e..fb81d3bccfb 100644
--- a/configs/roc-cc-rk3308_defconfig
+++ b/configs/roc-cc-rk3308_defconfig
@@ -7,9 +7,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3308-roc-cc"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3308=y
 CONFIG_TARGET_ROC_RK3308_CC=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFF0C0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_FIT=y
diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig
index 91b9422e26f..183332ab7ce 100644
--- a/configs/roc-cc-rk3328_defconfig
+++ b/configs/roc-cc-rk3328_defconfig
@@ -9,9 +9,9 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3328-roc-cc"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig
index a57899bfdfa..3ab5fd69c62 100644
--- a/configs/roc-pc-mezzanine-rk3399_defconfig
+++ b/configs/roc-pc-mezzanine-rk3399_defconfig
@@ -13,11 +13,12 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_ROC_PC_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
@@ -50,7 +51,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_REALTEK=y
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
index b45f0e0a899..0ef86748778 100644
--- a/configs/roc-pc-rk3399_defconfig
+++ b/configs/roc-pc-rk3399_defconfig
@@ -13,11 +13,12 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_ROC_PC_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb"
@@ -48,7 +49,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_REALTEK=y
diff --git a/configs/rock-3a-rk3568_defconfig b/configs/rock-3a-rk3568_defconfig
index 66ac2f6d7aa..d2f9cb7f7d5 100644
--- a/configs/rock-3a-rk3568_defconfig
+++ b/configs/rock-3a-rk3568_defconfig
@@ -8,11 +8,12 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-rock-3a"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=4
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -59,7 +60,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=4
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_XTX=y
diff --git a/configs/rock-3b-rk3568_defconfig b/configs/rock-3b-rk3568_defconfig
index 937796811a9..2023feb36c2 100644
--- a/configs/rock-3b-rk3568_defconfig
+++ b/configs/rock-3b-rk3568_defconfig
@@ -8,11 +8,12 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-rock-3b"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=4
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -65,7 +66,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=4
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_XTX=y
diff --git a/configs/rock-3c-rk3566_defconfig b/configs/rock-3c-rk3566_defconfig
index f44b202c8c3..2528c7c639c 100644
--- a/configs/rock-3c-rk3566_defconfig
+++ b/configs/rock-3c-rk3566_defconfig
@@ -8,11 +8,12 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-rock-3c"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=4
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -62,7 +63,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=4
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_MACRONIX=y
diff --git a/configs/rock-4c-plus-rk3399_defconfig b/configs/rock-4c-plus-rk3399_defconfig
index 80dc44986e7..3f5d2cdda1c 100644
--- a/configs/rock-4c-plus-rk3399_defconfig
+++ b/configs/rock-4c-plus-rk3399_defconfig
@@ -10,12 +10,15 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_ROCKPI4_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-4c-plus.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -50,7 +53,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -91,5 +93,3 @@ CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
 CONFIG_ERRNO_STR=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
diff --git a/configs/rock-4se-rk3399_defconfig b/configs/rock-4se-rk3399_defconfig
index f52d4bf9913..76408fa8050 100644
--- a/configs/rock-4se-rk3399_defconfig
+++ b/configs/rock-4se-rk3399_defconfig
@@ -10,14 +10,17 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_ROCKPI4_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-4se.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -54,7 +57,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -98,5 +100,3 @@ CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
 CONFIG_ERRNO_STR=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
diff --git a/configs/rock-5-itx-rk3588_defconfig b/configs/rock-5-itx-rk3588_defconfig
index bb9f148692a..d0dd1c20ece 100644
--- a/configs/rock-5-itx-rk3588_defconfig
+++ b/configs/rock-5-itx-rk3588_defconfig
@@ -10,11 +10,12 @@ CONFIG_ROCKCHIP_RK3588=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_ROCK5B_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=5
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -65,7 +66,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=5
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_XTX=y
diff --git a/configs/rock-pi-4-rk3399_defconfig b/configs/rock-pi-4-rk3399_defconfig
index e71c4588b94..3a9b641bc30 100644
--- a/configs/rock-pi-4-rk3399_defconfig
+++ b/configs/rock-pi-4-rk3399_defconfig
@@ -10,14 +10,17 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_ROCKPI4_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-pi-4a.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -55,7 +58,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -99,5 +101,3 @@ CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
 CONFIG_ERRNO_STR=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
diff --git a/configs/rock-pi-4c-rk3399_defconfig b/configs/rock-pi-4c-rk3399_defconfig
index 14373933a34..bb0fed7cb40 100644
--- a/configs/rock-pi-4c-rk3399_defconfig
+++ b/configs/rock-pi-4c-rk3399_defconfig
@@ -10,14 +10,17 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_ROCKPI4_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-pi-4c.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -55,7 +58,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -99,5 +101,3 @@ CONFIG_DISPLAY=y
 CONFIG_VIDEO_ROCKCHIP=y
 CONFIG_DISPLAY_ROCKCHIP_HDMI=y
 CONFIG_ERRNO_STR=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig
index 5cc54af3ca5..0a97c8934c6 100644
--- a/configs/rock-pi-e-rk3328_defconfig
+++ b/configs/rock-pi-e-rk3328_defconfig
@@ -9,9 +9,9 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3328-rock-pi-e"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/rock-pi-e-v3-rk3328_defconfig b/configs/rock-pi-e-v3-rk3328_defconfig
index 4c6cc634bd6..df5c7e2bc73 100644
--- a/configs/rock-pi-e-v3-rk3328_defconfig
+++ b/configs/rock-pi-e-v3-rk3328_defconfig
@@ -9,9 +9,9 @@ CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock-pi-e-v3"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig
index ec995a54a0e..a9c6d8a907a 100644
--- a/configs/rock-pi-n10-rk3399pro_defconfig
+++ b/configs/rock-pi-n10-rk3399pro_defconfig
@@ -8,9 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399pro-rock-pi-n10"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_EVB_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
diff --git a/configs/rock-pi-n8-rk3288_defconfig b/configs/rock-pi-n8-rk3288_defconfig
index 4c09b9137ef..dde0b81eee4 100644
--- a/configs/rock-pi-n8-rk3288_defconfig
+++ b/configs/rock-pi-n8-rk3288_defconfig
@@ -19,12 +19,12 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_SILENT_CONSOLE=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/rock-pi-s-rk3308_defconfig b/configs/rock-pi-s-rk3308_defconfig
index 54f7744c989..4b08af309b1 100644
--- a/configs/rock-pi-s-rk3308_defconfig
+++ b/configs/rock-pi-s-rk3308_defconfig
@@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3308-rock-pi-s"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3308=y
 CONFIG_TARGET_EVB_RK3308=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFF0A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 # CONFIG_DEBUG_UART_BOARD_INIT is not set
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_FIT=y
diff --git a/configs/rock-s0-rk3308_defconfig b/configs/rock-s0-rk3308_defconfig
index 074ec4cd66b..0a46e7bb187 100644
--- a/configs/rock-s0-rk3308_defconfig
+++ b/configs/rock-s0-rk3308_defconfig
@@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3308-rock-s0"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3308=y
 CONFIG_TARGET_EVB_RK3308=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFF0A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 # CONFIG_DEBUG_UART_BOARD_INIT is not set
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_FIT=y
diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig
index 2f6799c7b6a..e2ab5184d13 100644
--- a/configs/rock2_defconfig
+++ b/configs/rock2_defconfig
@@ -18,12 +18,12 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-rock2-square.dtb"
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/rock5a-rk3588s_defconfig b/configs/rock5a-rk3588s_defconfig
index c09e6655f02..9ffe917e9ef 100644
--- a/configs/rock5a-rk3588s_defconfig
+++ b/configs/rock5a-rk3588s_defconfig
@@ -6,9 +6,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-rock-5a"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_ROCK5A_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig
index 80a2f2fed58..dd360d5ad58 100644
--- a/configs/rock5b-rk3588_defconfig
+++ b/configs/rock5b-rk3588_defconfig
@@ -10,11 +10,12 @@ CONFIG_ROCKCHIP_RK3588=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_ROCK5B_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=5
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
@@ -62,7 +63,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=5
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_XTX=y
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
index 9d77dfb7098..6d00b52e62f 100644
--- a/configs/rock64-rk3328_defconfig
+++ b/configs/rock64-rk3328_defconfig
@@ -10,11 +10,11 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3328-rock64"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index 8fff3ed17c2..aebfa73459c 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -7,9 +7,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-rock960"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_ROCK960_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
diff --git a/configs/rock_defconfig b/configs/rock_defconfig
index 2b5334c3c25..e0234250347 100644
--- a/configs/rock_defconfig
+++ b/configs/rock_defconfig
@@ -20,9 +20,9 @@ CONFIG_SPL_STACK_R_ADDR=0x60080000
 CONFIG_SPL_STACK=0x10087fff
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x60800800
 CONFIG_DEBUG_UART_BASE=0x20064000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x60800800
 CONFIG_DEBUG_UART=y
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3188-radxarock.dtb"
diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
index fc0804a0b80..08b7e2784e9 100644
--- a/configs/rockpro64-rk3399_defconfig
+++ b/configs/rockpro64-rk3399_defconfig
@@ -12,11 +12,12 @@ CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_ROCKPRO64_RK3399=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTSTAGE=y
@@ -57,7 +58,6 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_PHY_REALTEK=y
diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
index 98f8904c918..8d29d991606 100644
--- a/configs/rpi_0_w_defconfig
+++ b/configs/rpi_0_w_defconfig
@@ -11,6 +11,7 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-zero-w"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_EFI_LOADER=y
 CONFIG_BOOTSTD_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_FDT_SIMPLEFB=y
@@ -48,4 +49,3 @@ CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_BCM2835=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
-CONFIG_EFI_LOADER=y
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index 060a8809506..64e6df41d83 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -11,6 +11,7 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-b"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_EFI_LOADER=y
 CONFIG_BOOTSTD_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_FDT_SIMPLEFB=y
@@ -48,4 +49,3 @@ CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_BCM2835=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
-CONFIG_EFI_LOADER=y
diff --git a/configs/rut_defconfig b/configs/rut_defconfig
index 2bcbdd6b12a..b2f87f54d59 100644
--- a/configs/rut_defconfig
+++ b/configs/rut_defconfig
@@ -16,12 +16,12 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SPL_BSS_START_ADDR=0x80000000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_SPL=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
@@ -89,7 +89,6 @@ CONFIG_BOOTCOUNT_ENV=y
 CONFIG_DFU_NAND=y
 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
 CONFIG_DM_I2C=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
 # CONFIG_SPL_DM_MMC is not set
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
diff --git a/configs/rzg2_beacon_defconfig b/configs/rzg2_beacon_defconfig
index eebbaa99379..95e82dfdfcf 100644
--- a/configs/rzg2_beacon_defconfig
+++ b/configs/rzg2_beacon_defconfig
@@ -10,8 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a774a1-beacon-rzg2m-kit"
 CONFIG_RCAR_GEN3=y
 CONFIG_TARGET_BEACON_RZG2M=y
 CONFIG_SYS_MONITOR_LEN=1048576
-# CONFIG_SPL is not set
 CONFIG_SYS_LOAD_ADDR=0x58000000
+# CONFIG_SPL is not set
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
diff --git a/configs/rzn1_snarc_defconfig b/configs/rzn1_snarc_defconfig
index c7f3e2749a0..1cd530260cd 100644
--- a/configs/rzn1_snarc_defconfig
+++ b/configs/rzn1_snarc_defconfig
@@ -9,6 +9,7 @@ CONFIG_RZN1=y
 CONFIG_SYS_LOAD_ADDR=0x80008000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x8fffffff
+# CONFIG_EFI_LOADER is not set
 # CONFIG_ARCH_MISC_INIT is not set
 # CONFIG_BOARD_EARLY_INIT_F is not set
 CONFIG_CMD_MEMTEST=y
@@ -21,4 +22,3 @@ CONFIG_RAM=y
 CONFIG_CADENCE_DDR_CTRL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SYS_NS16550_MEM32=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/s400_defconfig b/configs/s400_defconfig
index d75d296fa0e..f6f461aa480 100644
--- a/configs/s400_defconfig
+++ b/configs/s400_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-axg-s400"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_AXG=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" s400"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/s5p4418_nanopi2_defconfig b/configs/s5p4418_nanopi2_defconfig
index ee72778995b..23862090df7 100644
--- a/configs/s5p4418_nanopi2_defconfig
+++ b/configs/s5p4418_nanopi2_defconfig
@@ -12,6 +12,7 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x2E0200
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="s5p4418-nanopi2"
+CONFIG_SYS_LOAD_ADDR=0x71080000
 CONFIG_DEBUG_UART_BASE=0xC00A1000
 CONFIG_DEBUG_UART_CLOCK=150000000
 CONFIG_TARGET_NANOPI2=y
@@ -19,7 +20,6 @@ CONFIG_S5P4418_ONEWIRE=y
 CONFIG_ROOT_DEV=1
 CONFIG_BOOT_PART=1
 CONFIG_ROOT_PART=2
-CONFIG_SYS_LOAD_ADDR=0x71080000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x71000000
 CONFIG_SYS_MEMTEST_END=0xb0000000
diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig
index 67959ad79cd..1607a31ce09 100644
--- a/configs/s5pc210_universal_defconfig
+++ b/configs/s5pc210_universal_defconfig
@@ -15,8 +15,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x7000
 CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_SYS_MEM_TOP_HIDE=0x100000
 CONFIG_SYS_LOAD_ADDR=0x44800000
+CONFIG_SYS_MEM_TOP_HIDE=0x100000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="Please use defined boot"
diff --git a/configs/sam9x60_curiosity_mmc1_defconfig b/configs/sam9x60_curiosity_mmc1_defconfig
index 26e2823f3d7..7e7efa5c019 100644
--- a/configs/sam9x60_curiosity_mmc1_defconfig
+++ b/configs/sam9x60_curiosity_mmc1_defconfig
@@ -14,10 +14,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=200000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
diff --git a/configs/sam9x60_curiosity_mmc_defconfig b/configs/sam9x60_curiosity_mmc_defconfig
index 5ad90aff9cb..5d5f5ecf42c 100644
--- a/configs/sam9x60_curiosity_mmc_defconfig
+++ b/configs/sam9x60_curiosity_mmc_defconfig
@@ -14,10 +14,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=200000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig
index 0fd4264f639..93bbe6cec06 100644
--- a/configs/sam9x60ek_mmc_defconfig
+++ b/configs/sam9x60ek_mmc_defconfig
@@ -15,10 +15,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=200000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig
index e06039a7dd5..ddce5260556 100644
--- a/configs/sam9x60ek_nandflash_defconfig
+++ b/configs/sam9x60ek_nandflash_defconfig
@@ -14,11 +14,11 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=200000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_NAND_BOOT=y
diff --git a/configs/sam9x60ek_qspiflash_defconfig b/configs/sam9x60ek_qspiflash_defconfig
index b71c7becd69..7f092147842 100644
--- a/configs/sam9x60ek_qspiflash_defconfig
+++ b/configs/sam9x60ek_qspiflash_defconfig
@@ -14,10 +14,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=200000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d27_giantboard_defconfig b/configs/sama5d27_giantboard_defconfig
index 283c9300c56..4b29891d7d6 100644
--- a/configs/sama5d27_giantboard_defconfig
+++ b/configs/sama5d27_giantboard_defconfig
@@ -23,13 +23,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d27_som1_ek_mmc1_defconfig b/configs/sama5d27_som1_ek_mmc1_defconfig
index 89622c0e2a2..2715437dabe 100644
--- a/configs/sama5d27_som1_ek_mmc1_defconfig
+++ b/configs/sama5d27_som1_ek_mmc1_defconfig
@@ -23,13 +23,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d27_som1_ek_mmc_defconfig b/configs/sama5d27_som1_ek_mmc_defconfig
index ef6f9fb7946..25a0d6c3671 100644
--- a/configs/sama5d27_som1_ek_mmc_defconfig
+++ b/configs/sama5d27_som1_ek_mmc_defconfig
@@ -24,13 +24,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d27_som1_ek_qspiflash_defconfig b/configs/sama5d27_som1_ek_qspiflash_defconfig
index 0693a5b5053..f88a2e6d80b 100644
--- a/configs/sama5d27_som1_ek_qspiflash_defconfig
+++ b/configs/sama5d27_som1_ek_qspiflash_defconfig
@@ -24,13 +24,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d27_wlsom1_ek_mmc_defconfig b/configs/sama5d27_wlsom1_ek_mmc_defconfig
index 25213af37c5..5edb6346ad7 100644
--- a/configs/sama5d27_wlsom1_ek_mmc_defconfig
+++ b/configs/sama5d27_wlsom1_ek_mmc_defconfig
@@ -22,15 +22,17 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER_HII is not set
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -85,7 +87,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -123,4 +124,3 @@ CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
-# CONFIG_EFI_LOADER_HII is not set
diff --git a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
index 5502858fead..9d5863e63fa 100644
--- a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
+++ b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
@@ -22,15 +22,17 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER_HII is not set
 CONFIG_FIT=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SPI_BOOT=y
@@ -89,7 +91,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -127,4 +128,3 @@ CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
-# CONFIG_EFI_LOADER_HII is not set
diff --git a/configs/sama5d29_curiosity_mmc1_defconfig b/configs/sama5d29_curiosity_mmc1_defconfig
index 61edb23b196..25ff38c94f3 100644
--- a/configs/sama5d29_curiosity_mmc1_defconfig
+++ b/configs/sama5d29_curiosity_mmc1_defconfig
@@ -15,17 +15,19 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d29_curiosity"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x20000000
 CONFIG_SYS_MEMTEST_END=0x30000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 # CONFIG_BOOTSTD is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -82,7 +84,6 @@ CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SST=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
@@ -114,4 +115,3 @@ CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
 CONFIG_CMD_DHRYSTONE=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/sama5d29_curiosity_mmc_defconfig b/configs/sama5d29_curiosity_mmc_defconfig
index 0b16f386735..e691839d1b9 100644
--- a/configs/sama5d29_curiosity_mmc_defconfig
+++ b/configs/sama5d29_curiosity_mmc_defconfig
@@ -15,17 +15,19 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d29_curiosity"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x20000000
 CONFIG_SYS_MEMTEST_END=0x30000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 # CONFIG_BOOTSTD is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -81,7 +83,6 @@ CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SST=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
@@ -113,4 +114,3 @@ CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
 CONFIG_CMD_DHRYSTONE=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/sama5d29_curiosity_qspiflash_defconfig b/configs/sama5d29_curiosity_qspiflash_defconfig
index 9b522e81ef5..f340423a46f 100644
--- a/configs/sama5d29_curiosity_qspiflash_defconfig
+++ b/configs/sama5d29_curiosity_qspiflash_defconfig
@@ -15,17 +15,19 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d29_curiosity"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x20000000
 CONFIG_SYS_MEMTEST_END=0x30000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 # CONFIG_BOOTSTD is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -81,7 +83,6 @@ CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SST=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
@@ -114,4 +115,3 @@ CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
 CONFIG_FAT_WRITE=y
 CONFIG_CMD_DHRYSTONE=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/sama5d2_icp_mmc_defconfig b/configs/sama5d2_icp_mmc_defconfig
index 98b931c375d..c1d1f20095a 100644
--- a/configs/sama5d2_icp_mmc_defconfig
+++ b/configs/sama5d2_icp_mmc_defconfig
@@ -22,16 +22,18 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=83000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_LTO=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER_HII is not set
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -50,7 +52,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_DISPLAY_PRINT=y
 # CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_AT91_MCK_BYPASS=y
 CONFIG_HUSH_PARSER=y
@@ -90,7 +91,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -114,4 +114,3 @@ CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_SPL_ATMEL_TCB_TIMER=y
-# CONFIG_EFI_LOADER_HII is not set
diff --git a/configs/sama5d2_icp_qspiflash_defconfig b/configs/sama5d2_icp_qspiflash_defconfig
index 09c5f0074e7..c731c67e537 100644
--- a/configs/sama5d2_icp_qspiflash_defconfig
+++ b/configs/sama5d2_icp_qspiflash_defconfig
@@ -11,16 +11,18 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_icp"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=83000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x20000000
 CONFIG_SYS_MEMTEST_END=0x40000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_SYS_BOOT_GET_CMDLINE=y
 CONFIG_SYS_BOOT_GET_KBD=y
+# CONFIG_EFI_LOADER_HII is not set
 CONFIG_FIT=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
@@ -73,7 +75,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -98,4 +99,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-# CONFIG_EFI_LOADER_HII is not set
diff --git a/configs/sama5d2_ptc_ek_mmc_defconfig b/configs/sama5d2_ptc_ek_mmc_defconfig
index e110e2a43cf..ac96fe84b01 100644
--- a/configs/sama5d2_ptc_ek_mmc_defconfig
+++ b/configs/sama5d2_ptc_ek_mmc_defconfig
@@ -11,10 +11,10 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_ptc_ek"
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d2_ptc_ek_nandflash_defconfig b/configs/sama5d2_ptc_ek_nandflash_defconfig
index c187161836a..e4d6a1d8683 100644
--- a/configs/sama5d2_ptc_ek_nandflash_defconfig
+++ b/configs/sama5d2_ptc_ek_nandflash_defconfig
@@ -10,11 +10,11 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_ptc_ek"
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d2_xplained_emmc_defconfig b/configs/sama5d2_xplained_emmc_defconfig
index e2423475cbf..23b53f1d41d 100644
--- a/configs/sama5d2_xplained_emmc_defconfig
+++ b/configs/sama5d2_xplained_emmc_defconfig
@@ -23,13 +23,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
 CONFIG_DEBUG_UART_CLOCK=83000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_LTO=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index 40d98584098..f3b1b781fa0 100644
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -24,13 +24,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
 CONFIG_DEBUG_UART_CLOCK=83000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_LTO=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
diff --git a/configs/sama5d2_xplained_qspiflash_defconfig b/configs/sama5d2_xplained_qspiflash_defconfig
index 36aaa83fcb8..f4b27fba48d 100644
--- a/configs/sama5d2_xplained_qspiflash_defconfig
+++ b/configs/sama5d2_xplained_qspiflash_defconfig
@@ -24,13 +24,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
 CONFIG_DEBUG_UART_CLOCK=83000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_LTO=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig
index 9fd254e911e..da386d2c26e 100644
--- a/configs/sama5d2_xplained_spiflash_defconfig
+++ b/configs/sama5d2_xplained_spiflash_defconfig
@@ -26,13 +26,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
 CONFIG_DEBUG_UART_CLOCK=83000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_LTO=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
diff --git a/configs/sama5d36ek_cmp_mmc_defconfig b/configs/sama5d36ek_cmp_mmc_defconfig
index 5736c5ad132..a5d7be055be 100644
--- a/configs/sama5d36ek_cmp_mmc_defconfig
+++ b/configs/sama5d36ek_cmp_mmc_defconfig
@@ -12,10 +12,10 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek_cmp"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d36ek_cmp_nandflash_defconfig b/configs/sama5d36ek_cmp_nandflash_defconfig
index f3cb2800e2b..caf843ea8a2 100644
--- a/configs/sama5d36ek_cmp_nandflash_defconfig
+++ b/configs/sama5d36ek_cmp_nandflash_defconfig
@@ -11,11 +11,11 @@ CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek_cmp"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d36ek_cmp_spiflash_defconfig b/configs/sama5d36ek_cmp_spiflash_defconfig
index 704e7832f6f..7db6bedb45a 100644
--- a/configs/sama5d36ek_cmp_spiflash_defconfig
+++ b/configs/sama5d36ek_cmp_spiflash_defconfig
@@ -14,10 +14,10 @@ CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek_cmp"
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig
index 5fb7aa6c84a..ad02b095a9d 100644
--- a/configs/sama5d3_xplained_mmc_defconfig
+++ b/configs/sama5d3_xplained_mmc_defconfig
@@ -23,13 +23,13 @@ CONFIG_SPL_STACK=0x318000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig
index 054e52ef73d..2eb9e1b0e88 100644
--- a/configs/sama5d3_xplained_nandflash_defconfig
+++ b/configs/sama5d3_xplained_nandflash_defconfig
@@ -21,12 +21,12 @@ CONFIG_SPL_STACK=0x318000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig
index 0072ce4c91f..27e5a1dd5b8 100644
--- a/configs/sama5d3xek_mmc_defconfig
+++ b/configs/sama5d3xek_mmc_defconfig
@@ -23,13 +23,13 @@ CONFIG_SPL_STACK=0x318000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig
index 0c0029387ce..770b999e714 100644
--- a/configs/sama5d3xek_nandflash_defconfig
+++ b/configs/sama5d3xek_nandflash_defconfig
@@ -21,12 +21,12 @@ CONFIG_SPL_STACK=0x318000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig
index 95624a1f884..4bb0dbeb053 100644
--- a/configs/sama5d3xek_spiflash_defconfig
+++ b/configs/sama5d3xek_spiflash_defconfig
@@ -25,13 +25,13 @@ CONFIG_SPL_STACK=0x318000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig
index 40440c56b28..2efe73f76e9 100644
--- a/configs/sama5d4_xplained_mmc_defconfig
+++ b/configs/sama5d4_xplained_mmc_defconfig
@@ -24,13 +24,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xfc00c000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig
index abdde54f417..0241318e3da 100644
--- a/configs/sama5d4_xplained_nandflash_defconfig
+++ b/configs/sama5d4_xplained_nandflash_defconfig
@@ -22,12 +22,12 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xfc00c000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig
index f814a94fbd0..28babe7a4af 100644
--- a/configs/sama5d4_xplained_spiflash_defconfig
+++ b/configs/sama5d4_xplained_spiflash_defconfig
@@ -26,13 +26,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xfc00c000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig
index 3d3cc2d9f9e..c839514bf43 100644
--- a/configs/sama5d4ek_mmc_defconfig
+++ b/configs/sama5d4ek_mmc_defconfig
@@ -23,13 +23,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xfc00c000
 CONFIG_DEBUG_UART_CLOCK=88000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig
index 551c87ee3cc..fadefd9050c 100644
--- a/configs/sama5d4ek_nandflash_defconfig
+++ b/configs/sama5d4ek_nandflash_defconfig
@@ -21,12 +21,12 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xfc00c000
 CONFIG_DEBUG_UART_CLOCK=88000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig
index 5b4628a32b1..35b6314c58b 100644
--- a/configs/sama5d4ek_spiflash_defconfig
+++ b/configs/sama5d4ek_spiflash_defconfig
@@ -25,13 +25,13 @@ CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xfc00c000
 CONFIG_DEBUG_UART_CLOCK=88000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
diff --git a/configs/sama7g54_curiosity_mmc_defconfig b/configs/sama7g54_curiosity_mmc_defconfig
index 00a091df0e5..41c18452f9e 100644
--- a/configs/sama7g54_curiosity_mmc_defconfig
+++ b/configs/sama7g54_curiosity_mmc_defconfig
@@ -13,13 +13,14 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama7g54_curiosity"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_SYS_MEMTEST_START=0x60000000
 CONFIG_SYS_MEMTEST_END=0x68000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 # CONFIG_BOOTSTD is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_NAND_BOOT=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
@@ -118,5 +119,4 @@ CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_MCHP_PIT64B_TIMER=y
 CONFIG_CMD_DHRYSTONE=y
-# CONFIG_EFI_LOADER is not set
 CONFIG_PHANDLE_CHECK_SEQ=y
diff --git a/configs/sama7g54_curiosity_nandflash_defconfig b/configs/sama7g54_curiosity_nandflash_defconfig
index 0b2116d0419..59e8189287b 100644
--- a/configs/sama7g54_curiosity_nandflash_defconfig
+++ b/configs/sama7g54_curiosity_nandflash_defconfig
@@ -12,13 +12,14 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama7g54_curiosity"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_SYS_MEMTEST_START=0x60000000
 CONFIG_SYS_MEMTEST_END=0x68000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 # CONFIG_BOOTSTD is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_NAND_BOOT=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
@@ -117,5 +118,4 @@ CONFIG_TIMER=y
 CONFIG_MCHP_PIT64B_TIMER=y
 CONFIG_FAT_WRITE=y
 CONFIG_CMD_DHRYSTONE=y
-# CONFIG_EFI_LOADER is not set
 CONFIG_PHANDLE_CHECK_SEQ=y
diff --git a/configs/sama7g54_curiosity_qspiflash_defconfig b/configs/sama7g54_curiosity_qspiflash_defconfig
index 00e5362a1fa..20cd7143cb8 100644
--- a/configs/sama7g54_curiosity_qspiflash_defconfig
+++ b/configs/sama7g54_curiosity_qspiflash_defconfig
@@ -13,13 +13,14 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama7g54_curiosity"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_SYS_MEMTEST_START=0x60000000
 CONFIG_SYS_MEMTEST_END=0x68000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 # CONFIG_BOOTSTD is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_NAND_BOOT=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
@@ -118,5 +119,4 @@ CONFIG_TIMER=y
 CONFIG_MCHP_PIT64B_TIMER=y
 CONFIG_FAT_WRITE=y
 CONFIG_CMD_DHRYSTONE=y
-# CONFIG_EFI_LOADER is not set
 CONFIG_PHANDLE_CHECK_SEQ=y
diff --git a/configs/sama7g5ek_mmc1_defconfig b/configs/sama7g5ek_mmc1_defconfig
index 4e400d32e8d..e91135433ed 100644
--- a/configs/sama7g5ek_mmc1_defconfig
+++ b/configs/sama7g5ek_mmc1_defconfig
@@ -10,16 +10,17 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama7g5ek"
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_DEBUG_UART_BASE=0xe1824200
 CONFIG_DEBUG_UART_CLOCK=200000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x60000000
 CONFIG_SYS_MEMTEST_END=0x70000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER_HII is not set
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SD_BOOT=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk1p2 rw rootwait"
@@ -78,5 +79,4 @@ CONFIG_SYSRESET=y
 CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_MCHP_PIT64B_TIMER=y
-# CONFIG_EFI_LOADER_HII is not set
 CONFIG_PHANDLE_CHECK_SEQ=y
diff --git a/configs/sama7g5ek_mmc_defconfig b/configs/sama7g5ek_mmc_defconfig
index b31be99ca38..13896f01e49 100644
--- a/configs/sama7g5ek_mmc_defconfig
+++ b/configs/sama7g5ek_mmc_defconfig
@@ -10,16 +10,17 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama7g5ek"
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_DEBUG_UART_BASE=0xe1824200
 CONFIG_DEBUG_UART_CLOCK=200000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x62000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x60000000
 CONFIG_SYS_MEMTEST_END=0x70000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_EFI_LOADER_HII is not set
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SD_BOOT=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"
@@ -78,5 +79,4 @@ CONFIG_SYSRESET=y
 CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_MCHP_PIT64B_TIMER=y
-# CONFIG_EFI_LOADER_HII is not set
 CONFIG_PHANDLE_CHECK_SEQ=y
diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
index dd0582d2a0c..e2f57c11f0e 100644
--- a/configs/sandbox64_defconfig
+++ b/configs/sandbox64_defconfig
@@ -4,13 +4,15 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="sandbox64"
 CONFIG_DM_RESET=y
-CONFIG_PRE_CON_BUF_ADDR=0x100000
 CONFIG_SYS_LOAD_ADDR=0x0
+CONFIG_PRE_CON_BUF_ADDR=0x100000
 CONFIG_PCI=y
 CONFIG_SANDBOX64=y
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x00100000
 CONFIG_SYS_MEMTEST_END=0x00101000
+CONFIG_EFI_SECURE_BOOT=y
+CONFIG_EFI_RT_VOLATILE_STORE=y
 CONFIG_BUTTON_CMD=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
@@ -267,8 +269,6 @@ CONFIG_CMD_DHRYSTONE=y
 CONFIG_TPM=y
 CONFIG_ERRNO_STR=y
 CONFIG_GETOPT=y
-CONFIG_EFI_RT_VOLATILE_STORE=y
-CONFIG_EFI_SECURE_BOOT=y
 CONFIG_TEST_FDTDEC=y
 CONFIG_UNIT_TEST=y
 CONFIG_UT_TIME=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index a50fbce8d06..540ccef8950 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -4,12 +4,19 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="sandbox"
 CONFIG_DM_RESET=y
-CONFIG_PRE_CON_BUF_ADDR=0xf0000
 CONFIG_SYS_LOAD_ADDR=0x0
+CONFIG_PRE_CON_BUF_ADDR=0xf0000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x00100000
 CONFIG_SYS_MEMTEST_END=0x00101000
+CONFIG_EFI_SECURE_BOOT=y
+CONFIG_EFI_RT_VOLATILE_STORE=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+CONFIG_EFI_CAPSULE_AUTHENTICATE=y
+CONFIG_EFI_CAPSULE_CRT_FILE="board/sandbox/capsule_pub_key_good.crt"
 CONFIG_BUTTON_CMD=y
 CONFIG_FIT=y
 CONFIG_FIT_RSASSA_PSS=y
@@ -350,13 +357,6 @@ CONFIG_ECDSA_VERIFY=y
 CONFIG_TPM=y
 CONFIG_ERRNO_STR=y
 CONFIG_GETOPT=y
-CONFIG_EFI_RT_VOLATILE_STORE=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
-CONFIG_EFI_CAPSULE_AUTHENTICATE=y
-CONFIG_EFI_CAPSULE_CRT_FILE="board/sandbox/capsule_pub_key_good.crt"
-CONFIG_EFI_SECURE_BOOT=y
 CONFIG_TEST_FDTDEC=y
 CONFIG_UNIT_TEST=y
 CONFIG_UT_TIME=y
diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig
index 049a606613e..dd62adbebd5 100644
--- a/configs/sandbox_flattree_defconfig
+++ b/configs/sandbox_flattree_defconfig
@@ -8,6 +8,11 @@ CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x00100000
 CONFIG_SYS_MEMTEST_END=0x00101000
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
+CONFIG_EFI_CAPSULE_AUTHENTICATE=y
+CONFIG_EFI_CAPSULE_CRT_FILE="board/sandbox/capsule_pub_key_good.crt"
 CONFIG_BUTTON_CMD=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
@@ -223,11 +228,6 @@ CONFIG_CMD_DHRYSTONE=y
 CONFIG_TPM=y
 CONFIG_ZSTD=y
 CONFIG_ERRNO_STR=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
-CONFIG_EFI_CAPSULE_AUTHENTICATE=y
-CONFIG_EFI_CAPSULE_CRT_FILE="board/sandbox/capsule_pub_key_good.crt"
 CONFIG_UNIT_TEST=y
 CONFIG_UT_TIME=y
 CONFIG_UT_DM=y
diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig
index eb0f064ad28..41fa96ace32 100644
--- a/configs/sandbox_noinst_defconfig
+++ b/configs/sandbox_noinst_defconfig
@@ -11,11 +11,11 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_SPL=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_SANDBOX_SPL=y
 CONFIG_DEBUG_UART=y
@@ -44,7 +44,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xa000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x4000000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_ETH=y
@@ -187,6 +186,7 @@ CONFIG_P2SB=y
 CONFIG_PWRSEQ=y
 CONFIG_SPL_PWRSEQ=y
 CONFIG_FS_LOADER=y
+CONFIG_SPL_FS_LOADER=y
 CONFIG_MMC_SANDBOX=y
 CONFIG_DM_MTD=y
 CONFIG_MTD_CONCAT=y
@@ -282,8 +282,8 @@ CONFIG_TPM=y
 CONFIG_ZSTD=y
 CONFIG_SPL_LZMA=y
 CONFIG_ERRNO_STR=y
+CONFIG_SPL_LMB=y
 CONFIG_UNIT_TEST=y
 CONFIG_SPL_UNIT_TEST=y
 CONFIG_UT_TIME=y
 CONFIG_UT_DM=y
-CONFIG_SPL_LMB=y
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index bc6a430fa35..0b820ce62f5 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -9,8 +9,8 @@ CONFIG_DM_RESET=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x0
+CONFIG_SPL=y
 CONFIG_PCI=y
 CONFIG_SANDBOX_SPL=y
 CONFIG_DEBUG_UART=y
@@ -249,8 +249,8 @@ CONFIG_ZSTD=y
 CONFIG_SPL_LZMA=y
 CONFIG_ERRNO_STR=y
 CONFIG_SPL_HEXDUMP=y
+CONFIG_SPL_LMB=y
 CONFIG_UNIT_TEST=y
 CONFIG_SPL_UNIT_TEST=y
 CONFIG_UT_TIME=y
 CONFIG_UT_DM=y
-CONFIG_SPL_LMB=y
diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig
index 96e9211bd19..beb740d1b34 100644
--- a/configs/sandbox_vpl_defconfig
+++ b/configs/sandbox_vpl_defconfig
@@ -14,8 +14,8 @@ CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x0
+CONFIG_SPL=y
 CONFIG_PCI=y
 CONFIG_SANDBOX_SPL=y
 CONFIG_SANDBOX_TPL=y
@@ -29,7 +29,6 @@ CONFIG_FIT_BEST_MATCH=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_UPL=y
 CONFIG_UPL_IN=y
-CONFIG_SPL_UPL_OUT=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_BOOTSTAGE_FDT=y
diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig
index 48c257b09aa..84cec357b60 100644
--- a/configs/seaboard_defconfig
+++ b/configs/seaboard_defconfig
@@ -8,10 +8,10 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra20-seaboard"
 CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_SEABOARD=y
 CONFIG_TEGRA_ENABLE_UARTD=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_PBSIZE=2086
diff --git a/configs/sei510_defconfig b/configs/sei510_defconfig
index 791979e7449..6df4e9d2f0f 100644
--- a/configs/sei510_defconfig
+++ b/configs/sei510_defconfig
@@ -14,11 +14,11 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12a-sei510"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" sei510"
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/sei610_defconfig b/configs/sei610_defconfig
index ce5374319ba..0b561516caf 100644
--- a/configs/sei610_defconfig
+++ b/configs/sei610_defconfig
@@ -14,11 +14,11 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-sm1-sei610"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" sei610"
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/sheep-rk3368_defconfig b/configs/sheep-rk3368_defconfig
index 00a7f79401d..52677a27bdc 100644
--- a/configs/sheep-rk3368_defconfig
+++ b/configs/sheep-rk3368_defconfig
@@ -8,9 +8,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_DEFAULT_DEVICE_TREE="rk3368-sheep"
 CONFIG_ROCKCHIP_RK3368=y
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xFF1b0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-sheep.dtb"
diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig
index b673b3f6da2..9d59914f93e 100644
--- a/configs/sheevaplug_defconfig
+++ b/configs/sheevaplug_defconfig
@@ -14,8 +14,8 @@ CONFIG_TARGET_SHEEVAPLUG=y
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-sheevaplug"
-CONFIG_IDENT_STRING="\nMarvell-Sheevaplug"
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_IDENT_STRING="\nMarvell-Sheevaplug"
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=524288
 CONFIG_BOOTDELAY=3
diff --git a/configs/sifive_unleashed_defconfig b/configs/sifive_unleashed_defconfig
index 2365cc7d3bf..96b6f482c4f 100644
--- a/configs/sifive_unleashed_defconfig
+++ b/configs/sifive_unleashed_defconfig
@@ -11,16 +11,16 @@ CONFIG_DM_RESET=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_STACK=0x81cfe70
 CONFIG_SPL_BSS_START_ADDR=0x85000000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x80200000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x80200000
 CONFIG_TARGET_SIFIVE_UNLEASHED=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};"
diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig
index 47dbf1294d5..058e5fab683 100644
--- a/configs/sifive_unmatched_defconfig
+++ b/configs/sifive_unmatched_defconfig
@@ -12,10 +12,11 @@ CONFIG_DM_RESET=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_STACK=0x81cfe60
 CONFIG_SPL_BSS_START_ADDR=0x85000000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x80200000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x80200000
 CONFIG_SYS_PCI_64BIT=y
 CONFIG_PCI=y
 CONFIG_AHCI=y
@@ -25,7 +26,6 @@ CONFIG_RISCV_SMODE=y
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000
 CONFIG_BOOTSTD_DEFAULTS=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};"
 CONFIG_DEFAULT_FDT_FILE="sifive/hifive-unmatched-a00.dtb"
diff --git a/configs/sige7-rk3588_defconfig b/configs/sige7-rk3588_defconfig
index d15fc09fc8d..8b033e22b84 100644
--- a/configs/sige7-rk3588_defconfig
+++ b/configs/sige7-rk3588_defconfig
@@ -7,10 +7,10 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-armsom-sige7"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_SIGE7_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/silk_defconfig b/configs/silk_defconfig
index 2e4fab8ac54..feca2cef4ee 100644
--- a/configs/silk_defconfig
+++ b/configs/silk_defconfig
@@ -25,12 +25,13 @@ CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0xe6340000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_ENV_ADDR=0xC0000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CBSIZE=256
@@ -40,7 +41,6 @@ CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000
@@ -107,4 +107,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/sipeed_maix_bitm_defconfig b/configs/sipeed_maix_bitm_defconfig
index 67d5a007a8e..0d74d63786d 100644
--- a/configs/sipeed_maix_bitm_defconfig
+++ b/configs/sipeed_maix_bitm_defconfig
@@ -6,9 +6,11 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0xfff000
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_SYS_LOAD_ADDR=0x80000000
+CONFIG_SF_DEFAULT_BUS=3
 CONFIG_TARGET_SIPEED_MAIX=y
 CONFIG_ARCH_RV64I=y
 CONFIG_STACK_SIZE=0x100000
+# CONFIG_EFI_LOADER is not set
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run k210_bootcmd"
 CONFIG_SYS_CBSIZE=256
@@ -20,7 +22,5 @@ CONFIG_MTDPARTS_DEFAULT="nor0:1M(u-boot),0x1000@0xfff000(env)"
 # CONFIG_NET is not set
 CONFIG_CLK_K210_SET_RATE=y
 # CONFIG_INPUT is not set
-CONFIG_SF_DEFAULT_BUS=3
 CONFIG_FS_EXT4=y
 CONFIG_FS_FAT=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/sipeed_maix_smode_defconfig b/configs/sipeed_maix_smode_defconfig
index 049fac02cac..4af6e3428ba 100644
--- a/configs/sipeed_maix_smode_defconfig
+++ b/configs/sipeed_maix_smode_defconfig
@@ -7,10 +7,12 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0xfff000
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_SYS_LOAD_ADDR=0x80000000
+CONFIG_SF_DEFAULT_BUS=3
 CONFIG_TARGET_SIPEED_MAIX=y
 CONFIG_ARCH_RV64I=y
 CONFIG_RISCV_SMODE=y
 CONFIG_STACK_SIZE=0x100000
+# CONFIG_EFI_UNICODE_CAPITALIZATION is not set
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run k210_bootcmd"
 CONFIG_SYS_CBSIZE=256
@@ -20,7 +22,5 @@ CONFIG_MTDIDS_DEFAULT="nor0=spi3:0"
 CONFIG_MTDPARTS_DEFAULT="nor0:1M(u-boot),0x1000@0xfff000(env)"
 # CONFIG_NET is not set
 # CONFIG_INPUT is not set
-CONFIG_SF_DEFAULT_BUS=3
 CONFIG_FS_EXT4=y
 CONFIG_FS_FAT=y
-# CONFIG_EFI_UNICODE_CAPITALIZATION is not set
diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig
index af08354e601..5e54e7f6de2 100644
--- a/configs/smartweb_defconfig
+++ b/configs/smartweb_defconfig
@@ -22,9 +22,9 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x180000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_LTO=y
 CONFIG_FIT=y
 CONFIG_NAND_BOOT=y
diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig
index 8b42c8bdb32..bfc4efec598 100644
--- a/configs/smdk5250_defconfig
+++ b/configs/smdk5250_defconfig
@@ -19,9 +19,9 @@ CONFIG_ENV_OFFSET=0x3FC000
 CONFIG_ENV_SECT_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="exynos5250-smdk5250"
 CONFIG_SPL_TEXT_BASE=0x02023400
+CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_SPL=y
 CONFIG_IDENT_STRING=" for SMDK5250"
-CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_FIT=y
 CONFIG_FIT_BEST_MATCH=y
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig
index 55a53178f9c..cecbd410976 100644
--- a/configs/smdk5420_defconfig
+++ b/configs/smdk5420_defconfig
@@ -17,9 +17,9 @@ CONFIG_ENV_OFFSET=0x3FC000
 CONFIG_ENV_SECT_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="exynos5420-smdk5420"
 CONFIG_SPL_TEXT_BASE=0x02024410
+CONFIG_SYS_LOAD_ADDR=0x23e00000
 CONFIG_SPL=y
 CONFIG_IDENT_STRING=" for SMDK5420"
-CONFIG_SYS_LOAD_ADDR=0x23e00000
 CONFIG_FIT=y
 CONFIG_FIT_BEST_MATCH=y
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig
index 256190ddabf..5def53864f5 100644
--- a/configs/smdkc100_defconfig
+++ b/configs/smdkc100_defconfig
@@ -11,10 +11,11 @@ CONFIG_ENV_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
 CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_TARGET_SMDKC100=y
+CONFIG_SYS_LOAD_ADDR=0x30000000
 CONFIG_IDENT_STRING=" for SMDKC100"
 CONFIG_SYS_CLK_FREQ=12000000
-CONFIG_SYS_LOAD_ADDR=0x30000000
 CONFIG_ENV_ADDR=0x40000
+# CONFIG_EFI_LOADER is not set
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="root=/dev/mtdblock5 ubi.mtd=4 rootfstype=cramfs console=ttySAC0,115200n8 mem=128M  mtdparts=s3c-onenand:256k(bootloader),128k@0x40000(params),3m@0x60000(kernel),16m@0x360000(test),-(UBI)"
@@ -39,4 +40,3 @@ CONFIG_ENV_IS_IN_ONENAND=y
 CONFIG_MTD=y
 CONFIG_SAMSUNG_ONENAND=y
 CONFIG_SMC911X=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/smdkv310_defconfig b/configs/smdkv310_defconfig
index 7a0f6f89bc9..2677ba704d3 100644
--- a/configs/smdkv310_defconfig
+++ b/configs/smdkv310_defconfig
@@ -14,9 +14,9 @@ CONFIG_ENV_OFFSET=0x4200
 CONFIG_DEFAULT_DEVICE_TREE="exynos4210-smdkv310"
 CONFIG_SPL_TEXT_BASE=0x02021410
 CONFIG_SYS_MONITOR_LEN=262144
+CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_SPL=y
 CONFIG_IDENT_STRING=" for SMDKC210/V310"
-CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTCOMMAND="fatload mmc 0 40007000 uImage; bootm 40007000"
 CONFIG_SYS_PBSIZE=1024
diff --git a/configs/smegw01_defconfig b/configs/smegw01_defconfig
index 7f188e3a3ea..6dc95e551e3 100644
--- a/configs/smegw01_defconfig
+++ b/configs/smegw01_defconfig
@@ -7,13 +7,13 @@ CONFIG_ENV_OFFSET=0x100000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7d-smegw01"
 CONFIG_TARGET_SMEGW01=y
+CONFIG_SYS_LOAD_ADDR=0x88000000
 CONFIG_ENV_OFFSET_REDUND=0x110000
 CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
 # CONFIG_ARMV7_VIRT is not set
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_IMX_HAB=y
-CONFIG_SYS_LOAD_ADDR=0x88000000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0xa0000000
 CONFIG_FIT=y
diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig
index bc4ff0909c8..3874b875c82 100644
--- a/configs/sniper_defconfig
+++ b/configs/sniper_defconfig
@@ -13,8 +13,6 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
 # CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2
 # CONFIG_SPL_FS_EXT4 is not set
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_CMD_GPIO=y
diff --git a/configs/snow_defconfig b/configs/snow_defconfig
index 2c0757194bd..1a134cbea0f 100644
--- a/configs/snow_defconfig
+++ b/configs/snow_defconfig
@@ -19,11 +19,11 @@ CONFIG_ENV_OFFSET=0x3FC000
 CONFIG_ENV_SECT_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow"
 CONFIG_SPL_TEXT_BASE=0x02023400
+CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0x12c30000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_IDENT_STRING=" for snow"
-CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_BEST_MATCH=y
diff --git a/configs/socfpga_agilex5_defconfig b/configs/socfpga_agilex5_defconfig
index dc1cef3754e..8577ac610c2 100644
--- a/configs/socfpga_agilex5_defconfig
+++ b/configs/socfpga_agilex5_defconfig
@@ -14,10 +14,11 @@ CONFIG_SPL_STACK=0x7f000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0xbff00000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_TARGET_SOCFPGA_AGILEX5_SOCDK=y
 CONFIG_IDENT_STRING="socfpga_agilex5"
 CONFIG_SPL_FS_FAT=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
@@ -87,4 +88,3 @@ CONFIG_WDT=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 CONFIG_PANIC_HANG=y
 CONFIG_SPL_CRC32=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/socfpga_agilex_atf_defconfig b/configs/socfpga_agilex_atf_defconfig
index 4fc5c7918b9..bd6879c042a 100644
--- a/configs/socfpga_agilex_atf_defconfig
+++ b/configs/socfpga_agilex_atf_defconfig
@@ -18,16 +18,16 @@ CONFIG_SPL_STACK=0xffe3f000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3ff00000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
 CONFIG_IDENT_STRING="socfpga_agilex"
 CONFIG_SPL_FS_FAT=y
-CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x02000000
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="earlycon"
diff --git a/configs/socfpga_agilex_defconfig b/configs/socfpga_agilex_defconfig
index 03d15efb52c..29bb0916f33 100644
--- a/configs/socfpga_agilex_defconfig
+++ b/configs/socfpga_agilex_defconfig
@@ -17,15 +17,15 @@ CONFIG_SPL_STACK=0xffe3f000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3ff00000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
 CONFIG_IDENT_STRING="socfpga_agilex"
 CONFIG_SPL_FS_FAT=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x3fe00000
 CONFIG_REMAKE_ELF=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="earlycon"
diff --git a/configs/socfpga_agilex_vab_defconfig b/configs/socfpga_agilex_vab_defconfig
index 83a808fe927..983e3ac2907 100644
--- a/configs/socfpga_agilex_vab_defconfig
+++ b/configs/socfpga_agilex_vab_defconfig
@@ -18,17 +18,17 @@ CONFIG_SPL_STACK=0xffe3f000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3ff00000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_SOCFPGA_SECURE_VAB_AUTH=y
 CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
 CONFIG_IDENT_STRING="socfpga_agilex"
 CONFIG_SPL_FS_FAT=y
-CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x02000000
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="earlycon"
diff --git a/configs/socfpga_chameleonv3_defconfig b/configs/socfpga_chameleonv3_defconfig
index 029833675b4..a20b1b07e44 100644
--- a/configs/socfpga_chameleonv3_defconfig
+++ b/configs/socfpga_chameleonv3_defconfig
@@ -6,12 +6,12 @@ CONFIG_ENV_OFFSET=0x4400
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_chameleonv3_480_2"
 CONFIG_SPL_TEXT_BASE=0xFFE00000
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SOCFPGA_ARRIA10_ALWAYS_REPROGRAM=y
 CONFIG_TARGET_SOCFPGA_CHAMELEONV3=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_FIT=y
 CONFIG_SPL_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_MISC_INIT_R=y
 CONFIG_SPL_MAX_SIZE=0x40000
diff --git a/configs/socfpga_de1_soc_defconfig b/configs/socfpga_de1_soc_defconfig
index 4aeccebf77f..c8985eddad8 100644
--- a/configs/socfpga_de1_soc_defconfig
+++ b/configs/socfpga_de1_soc_defconfig
@@ -12,6 +12,7 @@ CONFIG_SPL_TEXT_BASE=0xFFFF0000
 CONFIG_DM_RESET=y
 CONFIG_SPL_STACK=0x0
 CONFIG_TARGET_SOCFPGA_TERASIC_DE1_SOC=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_TIMESTAMP=y
 CONFIG_FIT=y
 CONFIG_DISTRO_DEFAULTS=y
@@ -59,4 +60,3 @@ CONFIG_USB=y
 CONFIG_USB_DWC2=y
 # CONFIG_SPL_WDT is not set
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/socfpga_is1_defconfig b/configs/socfpga_is1_defconfig
index 0fff9080d41..74994e390a8 100644
--- a/configs/socfpga_is1_defconfig
+++ b/configs/socfpga_is1_defconfig
@@ -14,6 +14,7 @@ CONFIG_DM_RESET=y
 CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8
 CONFIG_SPL_STACK=0xfffffff8
 CONFIG_TARGET_SOCFPGA_IS1=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_TIMESTAMP=y
 CONFIG_FIT=y
 CONFIG_DISTRO_DEFAULTS=y
@@ -68,4 +69,3 @@ CONFIG_SPI=y
 CONFIG_CADENCE_QSPI=y
 # CONFIG_SPL_WDT is not set
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/socfpga_n5x_atf_defconfig b/configs/socfpga_n5x_atf_defconfig
index 2cf67167e9b..557adb418d1 100644
--- a/configs/socfpga_n5x_atf_defconfig
+++ b/configs/socfpga_n5x_atf_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_STACK=0xffe3f000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3ff00000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_TARGET_SOCFPGA_N5X_SOCDK=y
 CONFIG_IDENT_STRING="socfpga_n5x"
 CONFIG_SPL_FS_FAT=y
@@ -26,7 +27,6 @@ CONFIG_FIT=y
 CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x02000000
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="earlycon panic=-1 earlyprintk=ttyS0,115200"
diff --git a/configs/socfpga_n5x_defconfig b/configs/socfpga_n5x_defconfig
index 967f7562b17..8615bb4d1b6 100644
--- a/configs/socfpga_n5x_defconfig
+++ b/configs/socfpga_n5x_defconfig
@@ -17,12 +17,12 @@ CONFIG_SPL_STACK=0xffe3f000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3ff00000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_TARGET_SOCFPGA_N5X_SOCDK=y
 CONFIG_IDENT_STRING="socfpga_n5x"
 CONFIG_SPL_FS_FAT=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_REMAKE_ELF=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="earlycon panic=-1 earlyprintk=ttyS0,115200"
diff --git a/configs/socfpga_n5x_vab_defconfig b/configs/socfpga_n5x_vab_defconfig
index 53bdb4cbbf9..dbd5470b872 100644
--- a/configs/socfpga_n5x_vab_defconfig
+++ b/configs/socfpga_n5x_vab_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_STACK=0xffe3f000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3ff00000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SOCFPGA_SECURE_VAB_AUTH=y
 CONFIG_TARGET_SOCFPGA_N5X_SOCDK=y
 CONFIG_IDENT_STRING="socfpga_n5x"
@@ -27,7 +28,6 @@ CONFIG_FIT=y
 CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x02000000
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="earlycon panic=-1 earlyprintk=ttyS0,115200"
diff --git a/configs/socfpga_secu1_defconfig b/configs/socfpga_secu1_defconfig
index a023e454947..4665c0988ca 100644
--- a/configs/socfpga_secu1_defconfig
+++ b/configs/socfpga_secu1_defconfig
@@ -15,15 +15,15 @@ CONFIG_DM_RESET=y
 # CONFIG_SPL_MMC is not set
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK=0x0
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_TARGET_SOCFPGA_ARRIA5_SECU1=y
 CONFIG_ENV_OFFSET_REDUND=0x120000
 # CONFIG_SPL_LIBDISK_SUPPORT is not set
 # CONFIG_SPL_SPI is not set
-CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp"
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOT_RETRY=y
 CONFIG_BOOT_RETRY_TIME=45
@@ -43,8 +43,6 @@ CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 # CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1
-# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE is not set
 CONFIG_SPL_MTD=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SYS_MAXARGS=32
@@ -111,4 +109,3 @@ CONFIG_DESIGNWARE_WATCHDOG=y
 CONFIG_WDT=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
 # CONFIG_GZIP is not set
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/socfpga_stratix10_atf_defconfig b/configs/socfpga_stratix10_atf_defconfig
index 6d126a62a9b..471b921d072 100644
--- a/configs/socfpga_stratix10_atf_defconfig
+++ b/configs/socfpga_stratix10_atf_defconfig
@@ -18,16 +18,16 @@ CONFIG_SPL_STACK=0xffe3f000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3ff00000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y
 CONFIG_IDENT_STRING="socfpga_stratix10"
 CONFIG_SPL_FS_FAT=y
-CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x02000000
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="earlycon"
diff --git a/configs/socfpga_stratix10_defconfig b/configs/socfpga_stratix10_defconfig
index be7f747a7ed..99c33e6311a 100644
--- a/configs/socfpga_stratix10_defconfig
+++ b/configs/socfpga_stratix10_defconfig
@@ -17,17 +17,17 @@ CONFIG_SPL_STACK=0xffe3f000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3ff00000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y
 CONFIG_IDENT_STRING="socfpga_stratix10"
 CONFIG_SPL_FS_FAT=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x3fe00000
 CONFIG_OPTIMIZE_INLINING=y
 CONFIG_SPL_OPTIMIZE_INLINING=y
 CONFIG_REMAKE_ELF=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="earlycon"
diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig
index f64efcff6bd..094e9186fca 100644
--- a/configs/socfpga_vining_fpga_defconfig
+++ b/configs/socfpga_vining_fpga_defconfig
@@ -13,11 +13,11 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_vining_fpga"
 CONFIG_SPL_TEXT_BASE=0xFFFF0000
 CONFIG_DM_RESET=y
 CONFIG_SPL_STACK=0x0
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_TARGET_SOCFPGA_SOFTING_VINING_FPGA=y
 CONFIG_ENV_OFFSET_REDUND=0x110000
 CONFIG_TIMESTAMP=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig
index 15db06bed1c..e99d0a944a0 100644
--- a/configs/socrates_defconfig
+++ b/configs/socrates_defconfig
@@ -5,6 +5,7 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="socrates"
 CONFIG_SYS_MONITOR_LEN=786432
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_CLK_FREQ=66666666
 CONFIG_ENV_ADDR=0xFFF20000
 # CONFIG_SYS_PCI_64BIT is not set
@@ -18,7 +19,6 @@ CONFIG_ENABLE_36BIT_PHYS=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_BOOTDELAY=1
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Enter password to abort autoboot in %d seconds!\n"
diff --git a/configs/somlabs_visionsom_6ull_defconfig b/configs/somlabs_visionsom_6ull_defconfig
index b48ef03a98c..3730da52e00 100644
--- a/configs/somlabs_visionsom_6ull_defconfig
+++ b/configs/somlabs_visionsom_6ull_defconfig
@@ -10,6 +10,7 @@ CONFIG_TARGET_SOMLABS_VISIONSOM_6ULL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6ull-somlabs-visionsom"
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x88000000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_USE_BOOTCOMMAND=y
@@ -60,4 +61,3 @@ CONFIG_IMX_THERMAL=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LZO=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/sonoff-ihost-rv1126_defconfig b/configs/sonoff-ihost-rv1126_defconfig
index 4890644c7e6..78ca7a3859e 100644
--- a/configs/sonoff-ihost-rv1126_defconfig
+++ b/configs/sonoff-ihost-rv1126_defconfig
@@ -9,13 +9,13 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rv1126-sonoff-ihost"
 CONFIG_SYS_MONITOR_LEN=614400
 CONFIG_ROCKCHIP_RV1126=y
 CONFIG_TARGET_RV1126_SONOFF_IHOST=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0xe00800
 CONFIG_DEBUG_UART_BASE=0xff570000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xe00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DEFAULT_FDT_FILE="rv1126-sonoff-ihost.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/soquartz-blade-rk3566_defconfig b/configs/soquartz-blade-rk3566_defconfig
index 82910daf7cc..a1a51b2c657 100644
--- a/configs/soquartz-blade-rk3566_defconfig
+++ b/configs/soquartz-blade-rk3566_defconfig
@@ -6,9 +6,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-soquartz-blade"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_QUARTZ64_RK3566=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/soquartz-cm4-rk3566_defconfig b/configs/soquartz-cm4-rk3566_defconfig
index 5744f1baa81..a8bca0eaccc 100644
--- a/configs/soquartz-cm4-rk3566_defconfig
+++ b/configs/soquartz-cm4-rk3566_defconfig
@@ -6,9 +6,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-soquartz-cm4"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_QUARTZ64_RK3566=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/soquartz-model-a-rk3566_defconfig b/configs/soquartz-model-a-rk3566_defconfig
index 920df9b622d..f080d2e36d2 100644
--- a/configs/soquartz-model-a-rk3566_defconfig
+++ b/configs/soquartz-model-a-rk3566_defconfig
@@ -6,9 +6,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-soquartz-model-a"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_QUARTZ64_RK3566=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/spring_defconfig b/configs/spring_defconfig
index 2bd45cb9d60..43846e3cad9 100644
--- a/configs/spring_defconfig
+++ b/configs/spring_defconfig
@@ -19,11 +19,11 @@ CONFIG_ENV_OFFSET=0x3FC000
 CONFIG_ENV_SECT_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="exynos5250-spring"
 CONFIG_SPL_TEXT_BASE=0x02023400
+CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0x12c30000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_IDENT_STRING=" for spring"
-CONFIG_SYS_LOAD_ADDR=0x43e00000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_BEST_MATCH=y
diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig
index 174ac24dc74..511645cebef 100644
--- a/configs/starfive_visionfive2_defconfig
+++ b/configs/starfive_visionfive2_defconfig
@@ -18,10 +18,11 @@ CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK=0x8180000
 CONFIG_SPL_BSS_START_ADDR=0x8040000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_SYS_PCI_64BIT=y
 CONFIG_PCI=y
 CONFIG_TARGET_STARFIVE_VISIONFIVE2=y
@@ -33,7 +34,6 @@ CONFIG_RISCV_SMODE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
 CONFIG_BOOTSTD_DEFAULTS=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_BOOTSTAGE=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
@@ -56,8 +56,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x400000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
diff --git a/configs/stemmy_defconfig b/configs/stemmy_defconfig
index ee8e6be6e2c..88e76087a69 100644
--- a/configs/stemmy_defconfig
+++ b/configs/stemmy_defconfig
@@ -12,8 +12,9 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="ste-ux500-samsung-stemmy"
-CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x100000
+# CONFIG_EFI_LOADER is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run fastbootcmd"
@@ -42,4 +43,3 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x685d
 CONFIG_VIDEO=y
 CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_MCDE_SIMPLE=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/stih410-b2260_defconfig b/configs/stih410-b2260_defconfig
index 0c2ec3ede3a..815f7557d69 100644
--- a/configs/stih410-b2260_defconfig
+++ b/configs/stih410-b2260_defconfig
@@ -10,11 +10,11 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7bdfff10
 CONFIG_ENV_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="stih410-b2260"
 CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_IDENT_STRING="STMicroelectronics STiH410-B2260"
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x40000000
+CONFIG_IDENT_STRING="STMicroelectronics STiH410-B2260"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAS1,115200 CONSOLE=/dev/ttyAS1 consoleblank=0 root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait mem=992M@0x40000000 vmalloc=256m"
diff --git a/configs/stm32746g-eval_defconfig b/configs/stm32746g-eval_defconfig
index ce00f0d6ad2..21437d805c1 100644
--- a/configs/stm32746g-eval_defconfig
+++ b/configs/stm32746g-eval_defconfig
@@ -9,9 +9,9 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="stm32746g-eval"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x8008000
 CONFIG_STM32F7=y
 CONFIG_TARGET_STM32F746_DISCO=y
-CONFIG_SYS_LOAD_ADDR=0x8008000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig
index f6b82cca2e7..26e430a6e3f 100644
--- a/configs/stm32746g-eval_spl_defconfig
+++ b/configs/stm32746g-eval_spl_defconfig
@@ -15,11 +15,11 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_LOAD_ADDR=0x8009000
 CONFIG_SPL_SIZE_LIMIT=0x9000
 CONFIG_STM32F7=y
 CONFIG_TARGET_STM32F746_DISCO=y
 CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x8009000
 CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/stm32f429-discovery_defconfig b/configs/stm32f429-discovery_defconfig
index 5d59edb7381..5199e542208 100644
--- a/configs/stm32f429-discovery_defconfig
+++ b/configs/stm32f429-discovery_defconfig
@@ -8,9 +8,9 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10010000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="stm32f429-disco"
+CONFIG_SYS_LOAD_ADDR=0x90400000
 CONFIG_STM32F4=y
 CONFIG_TARGET_STM32F429_DISCOVERY=y
-CONFIG_SYS_LOAD_ADDR=0x90400000
 CONFIG_ENV_ADDR=0x8040000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/stm32f429-evaluation_defconfig b/configs/stm32f429-evaluation_defconfig
index 3e220d73984..412533e64f4 100644
--- a/configs/stm32f429-evaluation_defconfig
+++ b/configs/stm32f429-evaluation_defconfig
@@ -7,9 +7,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10010000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="stm32429i-eval"
+CONFIG_SYS_LOAD_ADDR=0x400000
 CONFIG_STM32F4=y
 CONFIG_TARGET_STM32F429_EVALUATION=y
-CONFIG_SYS_LOAD_ADDR=0x400000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/stm32f469-discovery_defconfig b/configs/stm32f469-discovery_defconfig
index 9b5f38b9efa..93420cb5bb1 100644
--- a/configs/stm32f469-discovery_defconfig
+++ b/configs/stm32f469-discovery_defconfig
@@ -7,9 +7,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10010000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="stm32f469-disco"
+CONFIG_SYS_LOAD_ADDR=0x400000
 CONFIG_STM32F4=y
 CONFIG_TARGET_STM32F469_DISCOVERY=y
-CONFIG_SYS_LOAD_ADDR=0x400000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig
index 7a2387519b2..2afe511152d 100644
--- a/configs/stm32f746-disco_defconfig
+++ b/configs/stm32f746-disco_defconfig
@@ -9,9 +9,9 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="stm32f746-disco"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x8008000
 CONFIG_STM32F7=y
 CONFIG_TARGET_STM32F746_DISCO=y
-CONFIG_SYS_LOAD_ADDR=0x8008000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig
index d456a423ed7..3ad86a01b9f 100644
--- a/configs/stm32f746-disco_spl_defconfig
+++ b/configs/stm32f746-disco_spl_defconfig
@@ -15,11 +15,11 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_LOAD_ADDR=0x8009000
 CONFIG_SPL_SIZE_LIMIT=0x9000
 CONFIG_STM32F7=y
 CONFIG_TARGET_STM32F746_DISCO=y
 CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x8009000
 CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/stm32f769-disco_defconfig b/configs/stm32f769-disco_defconfig
index a0d2aa043c8..cb7c6d26c3f 100644
--- a/configs/stm32f769-disco_defconfig
+++ b/configs/stm32f769-disco_defconfig
@@ -9,9 +9,9 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="stm32f769-disco"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x8008000
 CONFIG_STM32F7=y
 CONFIG_TARGET_STM32F746_DISCO=y
-CONFIG_SYS_LOAD_ADDR=0x8008000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
index ce4077b63f9..907190465a7 100644
--- a/configs/stm32f769-disco_spl_defconfig
+++ b/configs/stm32f769-disco_spl_defconfig
@@ -15,11 +15,11 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SYS_LOAD_ADDR=0x8009000
 CONFIG_SPL_SIZE_LIMIT=0x9000
 CONFIG_STM32F7=y
 CONFIG_TARGET_STM32F746_DISCO=y
 CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x8009000
 CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/stm32h743-disco_defconfig b/configs/stm32h743-disco_defconfig
index 89d79e98b6f..376edc271a1 100644
--- a/configs/stm32h743-disco_defconfig
+++ b/configs/stm32h743-disco_defconfig
@@ -8,9 +8,9 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x24040000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="stm32h743i-disco"
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_LOAD_ADDR=0xd0400000
 CONFIG_STM32H7=y
 CONFIG_TARGET_STM32H743_DISCO=y
-CONFIG_SYS_LOAD_ADDR=0xd0400000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/stm32h743-eval_defconfig b/configs/stm32h743-eval_defconfig
index 6b4ebd11691..c249c4dd3d4 100644
--- a/configs/stm32h743-eval_defconfig
+++ b/configs/stm32h743-eval_defconfig
@@ -8,9 +8,9 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x24040000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="stm32h743i-eval"
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_LOAD_ADDR=0xd0400000
 CONFIG_STM32H7=y
 CONFIG_TARGET_STM32H743_EVAL=y
-CONFIG_SYS_LOAD_ADDR=0xd0400000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/stm32h750-art-pi_defconfig b/configs/stm32h750-art-pi_defconfig
index 319b3033a40..d66f440fdb7 100644
--- a/configs/stm32h750-art-pi_defconfig
+++ b/configs/stm32h750-art-pi_defconfig
@@ -8,9 +8,9 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x24040000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="stm32h750i-art-pi"
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_LOAD_ADDR=0xc1800000
 CONFIG_STM32H7=y
 CONFIG_TARGET_STM32H750_ART_PI=y
-CONFIG_SYS_LOAD_ADDR=0xc1800000
 CONFIG_FIT=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
index 9aa3560c7e3..7f705808089 100644
--- a/configs/stm32mp13_defconfig
+++ b/configs/stm32mp13_defconfig
@@ -5,6 +5,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x180000
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0400000
 CONFIG_ENV_OFFSET=0x900000
 CONFIG_DEFAULT_DEVICE_TREE="stm32mp135f-dk"
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_STM32MP13X=y
 CONFIG_DDR_CACHEABLE_SIZE=0x8000000
 CONFIG_CMD_STM32KEY=y
@@ -12,12 +14,10 @@ CONFIG_TARGET_ST_STM32MP13X=y
 CONFIG_ENV_OFFSET_REDUND=0x940000
 CONFIG_CMD_STM32PROG=y
 # CONFIG_ARMV7_NONSEC is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
diff --git a/configs/stm32mp13_dhcor_defconfig b/configs/stm32mp13_dhcor_defconfig
index fb3d86deb64..ff9707d79ce 100644
--- a/configs/stm32mp13_dhcor_defconfig
+++ b/configs/stm32mp13_dhcor_defconfig
@@ -7,6 +7,8 @@ CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x3E0000
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="stm32mp135f-dhcor-dhsbc"
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_STM32MP13X=y
 CONFIG_DDR_CACHEABLE_SIZE=0x8000000
 CONFIG_CMD_STM32KEY=y
@@ -15,11 +17,10 @@ CONFIG_ENV_OFFSET_REDUND=0x3F0000
 CONFIG_CMD_STM32PROG=y
 CONFIG_STM32MP15_PWR=y
 # CONFIG_ARMV7_NONSEC is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTSTAGE_RECORD_COUNT=100
 CONFIG_BOOTDELAY=3
@@ -145,4 +146,3 @@ CONFIG_WDT=y
 CONFIG_WDT_STM32MP=y
 CONFIG_FAT_WRITE=y
 CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig
index 1f3578632d0..0b5ada73c9d 100644
--- a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig
+++ b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig
@@ -8,15 +8,15 @@ CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-icore-stm32mp1-ctouch2"
 CONFIG_SPL_TEXT_BASE=0x2FFC2500
 CONFIG_SPL_MMC=y
 CONFIG_SPL_STACK=0x30000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SPL=y
 CONFIG_TARGET_ICORE_STM32MP1=y
 CONFIG_ENV_OFFSET_REDUND=0x2C0000
 # CONFIG_ARMV7_VIRT is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
 CONFIG_SYS_PBSIZE=1050
@@ -27,8 +27,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
index 2fe0f77fc53..7a5a75f1a2e 100644
--- a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
+++ b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig
@@ -8,15 +8,15 @@ CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-icore-stm32mp1-edimm2.2"
 CONFIG_SPL_TEXT_BASE=0x2FFC2500
 CONFIG_SPL_MMC=y
 CONFIG_SPL_STACK=0x30000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SPL=y
 CONFIG_TARGET_ICORE_STM32MP1=y
 CONFIG_ENV_OFFSET_REDUND=0x2C0000
 # CONFIG_ARMV7_VIRT is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
 CONFIG_SYS_PBSIZE=1050
@@ -27,8 +27,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
index 052294b9a60..38aa867d38a 100644
--- a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
+++ b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
@@ -8,15 +8,15 @@ CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-microgea-stm32mp1-microdev2.0-of7"
 CONFIG_SPL_TEXT_BASE=0x2FFC2500
 CONFIG_SPL_MMC=y
 CONFIG_SPL_STACK=0x30000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SPL=y
 CONFIG_TARGET_MICROGEA_STM32MP1=y
 CONFIG_ENV_OFFSET_REDUND=0x2C0000
 # CONFIG_ARMV7_VIRT is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
 CONFIG_SYS_PBSIZE=1050
@@ -27,8 +27,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
index 22336e82323..b0c272b87af 100644
--- a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
+++ b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
@@ -8,15 +8,15 @@ CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-microgea-stm32mp1-microdev2.0"
 CONFIG_SPL_TEXT_BASE=0x2FFC2500
 CONFIG_SPL_MMC=y
 CONFIG_SPL_STACK=0x30000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SPL=y
 CONFIG_TARGET_MICROGEA_STM32MP1=y
 CONFIG_ENV_OFFSET_REDUND=0x2C0000
 # CONFIG_ARMV7_VIRT is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
 CONFIG_SYS_PBSIZE=1050
@@ -27,8 +27,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 806935f3892..8914b64c526 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -10,6 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
 CONFIG_SPL_TEXT_BASE=0x2FFC2500
 CONFIG_SPL_MMC=y
 CONFIG_SPL_STACK=0x30000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SPL=y
 CONFIG_CMD_STM32KEY=y
 CONFIG_TYPEC_STUSB160X=y
@@ -19,11 +21,9 @@ CONFIG_CMD_STM32PROG=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 # CONFIG_ARMV7_VIRT is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_FDT_SIMPLEFB=y
@@ -38,8 +38,6 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MTD=y
diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig
index 5f050ee0d05..f58a514308b 100644
--- a/configs/stm32mp15_defconfig
+++ b/configs/stm32mp15_defconfig
@@ -6,6 +6,8 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000
 CONFIG_ENV_OFFSET=0x900000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_DDR_CACHEABLE_SIZE=0x8000000
 CONFIG_CMD_STM32KEY=y
 CONFIG_TYPEC_STUSB160X=y
@@ -13,11 +15,9 @@ CONFIG_TARGET_ST_STM32MP15X=y
 CONFIG_ENV_OFFSET_REDUND=0x940000
 CONFIG_CMD_STM32PROG=y
 # CONFIG_ARMV7_NONSEC is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_FDT_SIMPLEFB=y
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index c3e6b097db0..7426a782375 100644
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -13,6 +13,8 @@ CONFIG_SPL_MMC=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C
 CONFIG_SPL_STACK=0x30000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SPL=y
 CONFIG_CMD_STM32KEY=y
 CONFIG_CMD_STBOARD=y
@@ -22,16 +24,15 @@ CONFIG_CMD_STM32PROG_OTP=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 # CONFIG_ARMV7_VIRT is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=1441792
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0xc1000000
 CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its"
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
@@ -47,14 +48,11 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MTD=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_POWER=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_FLASH_MTD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
@@ -182,4 +180,3 @@ CONFIG_WDT=y
 CONFIG_WDT_STM32MP=y
 CONFIG_FAT_WRITE=y
 # CONFIG_BINMAN_FDT is not set
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index 1eac11b5a44..b6d7f1eb7f5 100644
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -13,6 +13,8 @@ CONFIG_SPL_MMC=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C
 CONFIG_SPL_STACK=0x30000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SPL=y
 CONFIG_CMD_STM32KEY=y
 CONFIG_CMD_STBOARD=y
@@ -22,14 +24,13 @@ CONFIG_CMD_STM32PROG_OTP=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 # CONFIG_ARMV7_VIRT is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=1441792
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0xc1000000
 CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its"
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
@@ -45,14 +46,11 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MTD=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_POWER=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_FLASH_MTD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
@@ -182,4 +180,3 @@ CONFIG_WDT=y
 CONFIG_WDT_STM32MP=y
 CONFIG_FAT_WRITE=y
 # CONFIG_BINMAN_FDT is not set
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index 3c591d74af3..2e99b8e6a85 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -6,6 +6,8 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000
 CONFIG_ENV_OFFSET=0x280000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_DDR_CACHEABLE_SIZE=0x10000000
 CONFIG_CMD_STM32KEY=y
 CONFIG_TYPEC_STUSB160X=y
@@ -14,11 +16,9 @@ CONFIG_TARGET_ST_STM32MP15X=y
 CONFIG_ENV_OFFSET_REDUND=0x2C0000
 CONFIG_CMD_STM32PROG=y
 # CONFIG_ARMV7_NONSEC is not set
-CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_SYS_MEMTEST_START=0xc0000000
 CONFIG_SYS_MEMTEST_END=0xc4000000
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_FDT_SIMPLEFB=y
diff --git a/configs/stm32mp25_defconfig b/configs/stm32mp25_defconfig
index f5623a19bb2..85e6830d74e 100644
--- a/configs/stm32mp25_defconfig
+++ b/configs/stm32mp25_defconfig
@@ -3,14 +3,15 @@ CONFIG_ARCH_STM32MP=y
 CONFIG_SYS_MALLOC_F_LEN=0x400000
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x90000000
 CONFIG_DEFAULT_DEVICE_TREE="stm32mp257f-ev1"
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x84000000
 CONFIG_STM32MP25X=y
 CONFIG_DDR_CACHEABLE_SIZE=0x10000000
 CONFIG_TARGET_ST_STM32MP25X=y
-CONFIG_SYS_LOAD_ADDR=0x84000000
 CONFIG_SYS_MEMTEST_START=0x84000000
 CONFIG_SYS_MEMTEST_END=0x88000000
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_BOOTDELAY=1
 CONFIG_LAST_STAGE_INIT=y
 CONFIG_SYS_PROMPT="STM32MP> "
@@ -48,4 +49,3 @@ CONFIG_WDT=y
 CONFIG_WDT_STM32MP=y
 CONFIG_WDT_ARM_SMC=y
 CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/stout_defconfig b/configs/stout_defconfig
index ee87ea53d6e..e2ca0ae7a08 100644
--- a/configs/stout_defconfig
+++ b/configs/stout_defconfig
@@ -25,12 +25,13 @@ CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0xe6340000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x50000000
 CONFIG_ENV_ADDR=0xC0000
 CONFIG_PCI=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CBSIZE=256
@@ -40,7 +41,6 @@ CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000
@@ -106,4 +106,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/surface-rt_defconfig b/configs/surface-rt_defconfig
index 2326d24f282..dbb08abbb1a 100644
--- a/configs/surface-rt_defconfig
+++ b/configs/surface-rt_defconfig
@@ -10,9 +10,9 @@ CONFIG_ENV_OFFSET=0xFFFFD000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-microsoft-surface-rt"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_SURFACE_RT=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/synquacer_developerbox_defconfig b/configs/synquacer_developerbox_defconfig
index a7b3d1912d3..26c00ef594d 100644
--- a/configs/synquacer_developerbox_defconfig
+++ b/configs/synquacer_developerbox_defconfig
@@ -9,11 +9,15 @@ CONFIG_ENV_OFFSET=0x580000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="synquacer-sc2a11-developerbox"
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_DEVELOPERBOX=y
 CONFIG_AHCI=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 CONFIG_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_MAXARGS=128
 CONFIG_CMD_FWU_METADATA=y
@@ -89,9 +93,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_PCI=y
 CONFIG_USB_STORAGE=y
 CONFIG_FS_EXT4=y
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 CONFIG_FWU_MULTI_BANK_UPDATE=y
 CONFIG_FWU_MDATA_V2=y
diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig
index f96ab04e91f..e7e15c64ba2 100644
--- a/configs/syzygy_hub_defconfig
+++ b/configs/syzygy_hub_defconfig
@@ -13,8 +13,9 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x100000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
 CONFIG_SPL_STACK_R=y
-CONFIG_SPL=y
+CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_SYS_LOAD_ADDR=0x0
+CONFIG_SPL=y
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
@@ -23,7 +24,6 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_PBSIZE=2071
diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index 52d90f53dfd..b60dfc6cd6f 100644
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -26,13 +26,13 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x3e00
 CONFIG_SPL_BSS_MAX_SIZE=0x600
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=18432000
 CONFIG_ENV_OFFSET_REDUND=0x180000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/tb100_defconfig b/configs/tb100_defconfig
index 03f625ebd0e..95cff26fe28 100644
--- a/configs/tb100_defconfig
+++ b/configs/tb100_defconfig
@@ -7,9 +7,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30
 CONFIG_ENV_SIZE=0x800
 CONFIG_DEFAULT_DEVICE_TREE="abilis_tb100"
-CONFIG_SYS_CLK_FREQ=500000000
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_SYS_CLK_FREQ=500000000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200n8"
diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index e05969d27c2..3ab6799ef1e 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -18,6 +18,7 @@ CONFIG_SYS_MEMTEST_END=0x2f400000
 CONFIG_LTO=y
 CONFIG_HAS_BOARD_SIZE_LIMIT=y
 CONFIG_BOARD_SIZE_LIMIT=392192
+# CONFIG_EFI_LOADER is not set
 # CONFIG_BOOTSTD is not set
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOOTDELAY=3
@@ -118,4 +119,3 @@ CONFIG_IMX_HDMI=y
 CONFIG_VIDEO_BMP_RLE8=y
 # CONFIG_GZIP is not set
 CONFIG_OF_LIBFDT_ASSUME_MASK=0xff
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig
index 09a4d27b3e8..26a37d24e20 100644
--- a/configs/tec-ng_defconfig
+++ b/configs/tec-ng_defconfig
@@ -9,10 +9,10 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-tec-ng"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_TEC_NG=y
 CONFIG_TEGRA_ENABLE_UARTD=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2084
diff --git a/configs/tec_defconfig b/configs/tec_defconfig
index bab1b264925..5fd214d6971 100644
--- a/configs/tec_defconfig
+++ b/configs/tec_defconfig
@@ -8,10 +8,10 @@ CONFIG_ENV_OFFSET=0x1FFE0000
 CONFIG_DEFAULT_DEVICE_TREE="tegra20-tec"
 CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_TEC=y
 CONFIG_TEGRA_ENABLE_UARTD=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2081
diff --git a/configs/ten64_tfa_defconfig b/configs/ten64_tfa_defconfig
index 88609d8401f..a65209e8335 100644
--- a/configs/ten64_tfa_defconfig
+++ b/configs/ten64_tfa_defconfig
@@ -16,6 +16,7 @@ CONFIG_PCI=y
 CONFIG_AHCI=y
 CONFIG_SYS_FSL_NUM_CC_PLLS=3
 CONFIG_MP=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_BOOTSTD_FULL=y
 CONFIG_BOOTSTD_BOOTCOMMAND=y
@@ -96,4 +97,3 @@ CONFIG_USB_GADGET=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
 CONFIG_TPM=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/th1520_lpi4a_defconfig b/configs/th1520_lpi4a_defconfig
index db80e33870b..98bcb220392 100644
--- a/configs/th1520_lpi4a_defconfig
+++ b/configs/th1520_lpi4a_defconfig
@@ -5,6 +5,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
 CONFIG_DEFAULT_DEVICE_TREE="th1520-lichee-pi-4a"
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SYS_LOAD_ADDR=0x80200000
 # CONFIG_SMP is not set
 CONFIG_TARGET_TH1520_LPI4A=y
@@ -12,12 +13,12 @@ CONFIG_ARCH_RV64I=y
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_SYS_BOOT_GET_CMDLINE=y
 CONFIG_SYS_BOOT_GET_KBD=y
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 # CONFIG_FIT_FULL_CHECK is not set
 # CONFIG_FIT_PRINT is not set
 # CONFIG_BOOTSTD is not set
 # CONFIG_LEGACY_IMAGE_FORMAT is not set
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTARGS_SUBST=y
 CONFIG_BOOTCOMMAND=""
@@ -78,4 +79,3 @@ CONFIG_ZLIB_UNCOMPRESS=y
 CONFIG_BZIP2=y
 CONFIG_ZSTD=y
 CONFIG_LIB_RATIONAL=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig
index d237092bb96..5a075c52190 100644
--- a/configs/theadorable_debug_defconfig
+++ b/configs/theadorable_debug_defconfig
@@ -19,14 +19,15 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40020000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
 CONFIG_SYS_MEM_TOP_HIDE=0x80000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 # CONFIG_FIT_PRINT is not set
 CONFIG_BOOTDELAY=3
@@ -101,4 +102,3 @@ CONFIG_BMP_16BPP=y
 CONFIG_BMP_24BPP=y
 CONFIG_BMP_32BPP=y
 CONFIG_FAT_WRITE=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/thunderx_88xx_defconfig b/configs/thunderx_88xx_defconfig
index b754cc01cc8..3cc04afe69b 100644
--- a/configs/thunderx_88xx_defconfig
+++ b/configs/thunderx_88xx_defconfig
@@ -9,13 +9,14 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x57fff0
 CONFIG_ENV_SIZE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="thunderx-88xx"
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x500000
 CONFIG_DEBUG_UART_BASE=0x87e024000000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" for Cavium Thunder CN88XX ARM v8 Multi-Core"
-CONFIG_SYS_LOAD_ADDR=0x500000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
-CONFIG_SYS_BOOTM_LEN=0x800000
+# CONFIG_EFI_LOADER is not set
 CONFIG_BOOTDELAY=5
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e024000000 debug maxcpus=48 rootwait rw root=/dev/sda2 coherent_pool=16M"
@@ -36,4 +37,3 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_MMC is not set
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/tiger-rk3588_defconfig b/configs/tiger-rk3588_defconfig
index 8eb1027e449..f962ac416f3 100644
--- a/configs/tiger-rk3588_defconfig
+++ b/configs/tiger-rk3588_defconfig
@@ -10,10 +10,11 @@ CONFIG_ROCKCHIP_RK3588=y
 CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_TIGER_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=5
 CONFIG_DEBUG_UART_BASE=0xfeb50000
 CONFIG_DEBUG_UART_CLOCK=24000000
 # CONFIG_DEBUG_UART_BOARD_INIT is not set
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
@@ -86,7 +87,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
 # CONFIG_SPI_FLASH is not set
-CONFIG_SF_DEFAULT_BUS=5
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DWC_ETH_QOS=y
diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
index 855cf414a6b..42dbef9c2c3 100644
--- a/configs/tinker-rk3288_defconfig
+++ b/configs/tinker-rk3288_defconfig
@@ -19,13 +19,13 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_SPL_SIZE_LIMIT=0x4b000
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
index 2a2e1226eb5..e62a03e066c 100644
--- a/configs/tinker-s-rk3288_defconfig
+++ b/configs/tinker-s-rk3288_defconfig
@@ -19,13 +19,13 @@ CONFIG_SPL_STACK_R_ADDR=0x800000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_SPL_SIZE_LIMIT=0x4b000
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb"
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/tools-only_defconfig b/configs/tools-only_defconfig
index b54d2cefa10..5a08563bec1 100644
--- a/configs/tools-only_defconfig
+++ b/configs/tools-only_defconfig
@@ -5,6 +5,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sandbox"
 CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_PCI=y
 # CONFIG_SANDBOX_SDL is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_TIMESTAMP=y
 CONFIG_FIT=y
@@ -36,5 +37,4 @@ CONFIG_TIMER=y
 # CONFIG_VIRTIO_PCI is not set
 # CONFIG_VIRTIO_SANDBOX is not set
 # CONFIG_GENERATE_ACPI_TABLE is not set
-# CONFIG_EFI_LOADER is not set
 CONFIG_TOOLS_MKEFICAPSULE=y
diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig
index 638d7306146..accdfe9a2ab 100644
--- a/configs/topic_miami_defconfig
+++ b/configs/topic_miami_defconfig
@@ -15,17 +15,17 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x100000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x3c00000
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miami/ps7_regs.txt"
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x18000000
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
 CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=0
 CONFIG_BOOTCOMMAND="if mmcinfo; then if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; fi; fi; run $modeboot"
diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig
index af47fab83c0..1c65f6ef632 100644
--- a/configs/topic_miamilite_defconfig
+++ b/configs/topic_miamilite_defconfig
@@ -15,17 +15,17 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x100000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x3c00000
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamilite/ps7_regs.txt"
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x18000000
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
 CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=0
 CONFIG_BOOTCOMMAND="if mmcinfo; then if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; fi; fi; run $modeboot"
diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig
index ad321749694..53bf0afd4d1 100644
--- a/configs/topic_miamiplus_defconfig
+++ b/configs/topic_miamiplus_defconfig
@@ -15,17 +15,17 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x100000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x3c00000
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_BOOT_INIT_FILE="board/topic/zynq/zynq-topic-miamiplus/ps7_regs.txt"
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x18000000
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
 CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=0
 CONFIG_BOOTCOMMAND="if mmcinfo; then if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; fi; fi; run $modeboot"
diff --git a/configs/toybrick-rk3588_defconfig b/configs/toybrick-rk3588_defconfig
index 12a076aeeae..5e70341c987 100644
--- a/configs/toybrick-rk3588_defconfig
+++ b/configs/toybrick-rk3588_defconfig
@@ -6,9 +6,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-toybrick-x0"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_TOYBRICK_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEB50000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/transformer_t20_defconfig b/configs/transformer_t20_defconfig
index 13bb2695007..f424ce8c273 100644
--- a/configs/transformer_t20_defconfig
+++ b/configs/transformer_t20_defconfig
@@ -10,11 +10,11 @@ CONFIG_ENV_OFFSET=0xFFFFD000
 CONFIG_DEFAULT_DEVICE_TREE="tegra20-asus-tf101"
 CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SYS_LOAD_ADDR=0x2000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_TRANSFORMER_T20=y
 CONFIG_TEGRA_ENABLE_UARTD=y
 CONFIG_CMD_EBTUPDATE=y
-CONFIG_SYS_LOAD_ADDR=0x2000000
 CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/transformer_t30_defconfig b/configs/transformer_t30_defconfig
index 1ebdb31acfc..10784033e7e 100644
--- a/configs/transformer_t30_defconfig
+++ b/configs/transformer_t30_defconfig
@@ -10,10 +10,10 @@ CONFIG_ENV_OFFSET=0xFFFFD000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf201"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_TRANSFORMER_T30=y
 CONFIG_CMD_EBTUPDATE=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig
index 67561368128..3796aed1a93 100644
--- a/configs/trats2_defconfig
+++ b/configs/trats2_defconfig
@@ -15,8 +15,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x7000
 CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_SYS_MEM_TOP_HIDE=0x100000
 CONFIG_SYS_LOAD_ADDR=0x43e00000
+CONFIG_SYS_MEM_TOP_HIDE=0x100000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
diff --git a/configs/trats_defconfig b/configs/trats_defconfig
index 98925243bf4..91ad6b52297 100644
--- a/configs/trats_defconfig
+++ b/configs/trats_defconfig
@@ -15,8 +15,8 @@ CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x7000
 CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats"
 CONFIG_SYS_MONITOR_LEN=262144
-CONFIG_SYS_MEM_TOP_HIDE=0x100000
 CONFIG_SYS_LOAD_ADDR=0x44800000
+CONFIG_SYS_MEM_TOP_HIDE=0x100000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig
index 0745df2a158..c79727594ed 100644
--- a/configs/trimslice_defconfig
+++ b/configs/trimslice_defconfig
@@ -10,9 +10,9 @@ CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="tegra20-trimslice"
 CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_TRIMSLICE=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2087
diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig
index ab221de25a1..3a32bc8ab27 100644
--- a/configs/tuge1_defconfig
+++ b/configs/tuge1_defconfig
@@ -6,8 +6,9 @@ CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="kmtuge1"
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_CLK_FREQ=66000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SYS_CLK_FREQ=66000000
 CONFIG_ENV_ADDR=0xF00C0000
 CONFIG_MPC83xx=y
 CONFIG_HIGH_BATS=y
@@ -96,7 +97,6 @@ CONFIG_LCRR_EADC_1=y
 CONFIG_LCRR_CLKDIV_2=y
 CONFIG_83XX_PCICLK=0x3ef1480
 # CONFIG_PCI is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
@@ -166,4 +166,3 @@ CONFIG_QE_UEC=y
 # CONFIG_PINCTRL_FULL is not set
 CONFIG_QE=y
 CONFIG_SYS_NS16550=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/turing-rk1-rk3588_defconfig b/configs/turing-rk1-rk3588_defconfig
index e6e1bda7ec1..0eddf15833c 100644
--- a/configs/turing-rk1-rk3588_defconfig
+++ b/configs/turing-rk1-rk3588_defconfig
@@ -7,9 +7,9 @@ CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-turing-rk1"
 CONFIG_ROCKCHIP_RK3588=y
 CONFIG_SPL_SERIAL=y
 CONFIG_TARGET_TURINGRK1_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFEBC0000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/turris_1x_sdcard_defconfig b/configs/turris_1x_sdcard_defconfig
index b402004f588..ec4717ed3c2 100644
--- a/configs/turris_1x_sdcard_defconfig
+++ b/configs/turris_1x_sdcard_defconfig
@@ -10,10 +10,10 @@ CONFIG_SPL_TEXT_BASE=0xf8f80000
 CONFIG_SYS_MONITOR_LEN=1048576
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xffe04500
 CONFIG_DEBUG_UART_CLOCK=37500000
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_ENV_ADDR=0xeff20000
 CONFIG_MPC85xx=y
 CONFIG_SYS_INIT_RAM_LOCK=y
diff --git a/configs/turris_mox_defconfig b/configs/turris_mox_defconfig
index c62e0d04c9c..5ba7d76f9e6 100644
--- a/configs/turris_mox_defconfig
+++ b/configs/turris_mox_defconfig
@@ -12,8 +12,8 @@ CONFIG_ENV_OFFSET=0x180000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-3720-turris-mox"
-CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig
index 93f0bc53f9e..3bb85591834 100644
--- a/configs/turris_omnia_defconfig
+++ b/configs/turris_omnia_defconfig
@@ -25,10 +25,10 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig
index 22c5d487a4a..c12b8e9c887 100644
--- a/configs/tuxx1_defconfig
+++ b/configs/tuxx1_defconfig
@@ -6,8 +6,9 @@ CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="kmtuxa1"
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_CLK_FREQ=66000000
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x100000
+CONFIG_SYS_CLK_FREQ=66000000
 CONFIG_ENV_ADDR=0xF00C0000
 CONFIG_MPC83xx=y
 CONFIG_HIGH_BATS=y
@@ -110,7 +111,6 @@ CONFIG_LCRR_EADC_1=y
 CONFIG_LCRR_CLKDIV_2=y
 CONFIG_83XX_PCICLK=0x3ef1480
 # CONFIG_PCI is not set
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
@@ -183,4 +183,3 @@ CONFIG_QE_UEC=y
 # CONFIG_PINCTRL_FULL is not set
 CONFIG_QE=y
 CONFIG_SYS_NS16550=y
-CONFIG_HUSH_OLD_PARSER=y
diff --git a/configs/u200_defconfig b/configs/u200_defconfig
index 879ae0defa7..a49f87193a1 100644
--- a/configs/u200_defconfig
+++ b/configs/u200_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-g12a-u200"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_G12A=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" u200"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig
index a8ee1dcf186..6fc4576fb7a 100644
--- a/configs/uDPU_defconfig
+++ b/configs/uDPU_defconfig
@@ -10,8 +10,8 @@ CONFIG_ENV_OFFSET=0x180000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-3720-uDPU"
-CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_SYS_LOAD_ADDR=0x6000000
+CONFIG_DEBUG_UART_BASE=0xd0012000
 CONFIG_DEBUG_UART=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig
index 56ab20d787c..0aed6195e8a 100644
--- a/configs/uniphier_ld4_sld8_defconfig
+++ b/configs/uniphier_ld4_sld8_defconfig
@@ -12,11 +12,11 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x100000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x85000000
 CONFIG_SPL=y
 CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_LOAD_ADDR=0x85000000
 CONFIG_TIMESTAMP=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_FDT_FIXUP_PARTITIONS=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
diff --git a/configs/uniphier_v7_defconfig b/configs/uniphier_v7_defconfig
index 7e1e2a9d802..1939fa1da31 100644
--- a/configs/uniphier_v7_defconfig
+++ b/configs/uniphier_v7_defconfig
@@ -12,11 +12,11 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x100000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x85000000
 CONFIG_SPL=y
 CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_LOAD_ADDR=0x85000000
 CONFIG_TIMESTAMP=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_FDT_FIXUP_PARTITIONS=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig
index 25ad67cf4c7..5dfd4283133 100644
--- a/configs/uniphier_v8_defconfig
+++ b/configs/uniphier_v8_defconfig
@@ -7,11 +7,11 @@ CONFIG_NR_DRAM_BANKS=3
 CONFIG_ENV_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
 CONFIG_SYS_MONITOR_LEN=2097152
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x85000000
 CONFIG_ARCH_UNIPHIER_V8_MULTI=y
 CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_LOAD_ADDR=0x85000000
 CONFIG_TIMESTAMP=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_FDT_FIXUP_PARTITIONS=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig
index b717fc826ff..3e948721e15 100644
--- a/configs/usbarmory_defconfig
+++ b/configs/usbarmory_defconfig
@@ -8,8 +8,8 @@ CONFIG_ENV_OFFSET=0x60000
 CONFIG_TARGET_USBARMORY=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx53-usbarmory"
-# CONFIG_CMD_BMODE is not set
 CONFIG_SYS_LOAD_ADDR=0x72000000
+# CONFIG_CMD_BMODE is not set
 CONFIG_SYS_MEMTEST_START=0x70000000
 CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig
index 6935caa013a..821fa33a433 100644
--- a/configs/venice2_defconfig
+++ b/configs/venice2_defconfig
@@ -10,10 +10,10 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra124-venice2"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA124=y
 CONFIG_TARGET_VENICE2=y
 CONFIG_TEGRA_GPU=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=2086
 CONFIG_CONSOLE_MUX=y
diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig
index ed0ca82f9a2..77a87380354 100644
--- a/configs/ventana_defconfig
+++ b/configs/ventana_defconfig
@@ -8,10 +8,10 @@ CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra20-ventana"
 CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_VENTANA=y
 CONFIG_TEGRA_ENABLE_UARTD=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_PBSIZE=2085
diff --git a/configs/verdin-am62_a53_defconfig b/configs/verdin-am62_a53_defconfig
index c5652e9541c..ff2771ed02a 100644
--- a/configs/verdin-am62_a53_defconfig
+++ b/configs/verdin-am62_a53_defconfig
@@ -26,11 +26,12 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80c80000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x40000000
+CONFIG_SYS_LOAD_ADDR=0x88200000
 CONFIG_SPL_SIZE_LIMIT=0x40000
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SYS_LOAD_ADDR=0x88200000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0xB0000000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
@@ -38,7 +39,6 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_SYS_BOOTM_LEN=0x40000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_USE_PREBOOT=y
@@ -52,7 +52,6 @@ CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -60,7 +59,6 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_THERMAL=y
 CONFIG_SPL_YMODEM_SUPPORT=y
diff --git a/configs/verdin-am62_r5_defconfig b/configs/verdin-am62_r5_defconfig
index bd9ecd94922..4a7da1a1ac6 100644
--- a/configs/verdin-am62_r5_defconfig
+++ b/configs/verdin-am62_r5_defconfig
@@ -42,14 +42,12 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_YMODEM_SUPPORT=y
diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index a7e969d3cfc..aa4a400c3c6 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -20,9 +20,9 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_FIT=y
@@ -49,7 +49,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig
index 15cfe2c48ac..bf1a0b8badf 100644
--- a/configs/verdin-imx8mp_defconfig
+++ b/configs/verdin-imx8mp_defconfig
@@ -26,10 +26,10 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x98fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x48200000
 CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
@@ -62,7 +62,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
index 7713454136b..c823cb0a30e 100644
--- a/configs/vf610twr_defconfig
+++ b/configs/vf610twr_defconfig
@@ -8,8 +8,6 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xC0000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
 CONFIG_SYS_LOAD_ADDR=0x82000000
diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig
index 2cef8988638..84e73c0c665 100644
--- a/configs/vf610twr_nand_defconfig
+++ b/configs/vf610twr_nand_defconfig
@@ -8,8 +8,6 @@ CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x180000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
 CONFIG_SYS_LOAD_ADDR=0x82000000
diff --git a/configs/videostrong-kii-pro_defconfig b/configs/videostrong-kii-pro_defconfig
index 7a5af234471..af0fdedde4b 100644
--- a/configs/videostrong-kii-pro_defconfig
+++ b/configs/videostrong-kii-pro_defconfig
@@ -9,10 +9,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxbb-kii-pro"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" kii-pro"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
diff --git a/configs/vocore2_defconfig b/configs/vocore2_defconfig
index 04b093ded82..e2604a135cf 100644
--- a/configs/vocore2_defconfig
+++ b/configs/vocore2_defconfig
@@ -12,9 +12,9 @@ CONFIG_SYS_BOOTCOUNT_ADDR=0xb000006c
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
 CONFIG_SPL_BSS_START_ADDR=0x80010000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
+CONFIG_SYS_LOAD_ADDR=0x80100000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_SYS_LOAD_ADDR=0x80100000
 CONFIG_ARCH_MTMIPS=y
 CONFIG_SOC_MT7628=y
 CONFIG_BOARD_VOCORE2=y
diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig
index 42c06d1e985..e75466c1cad 100644
--- a/configs/vyasa-rk3288_defconfig
+++ b/configs/vyasa-rk3288_defconfig
@@ -20,11 +20,11 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_PREBOOT=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb"
 CONFIG_SILENT_CONSOLE=y
diff --git a/configs/wetek-core2_defconfig b/configs/wetek-core2_defconfig
index c4b126c2b7e..89f1f616237 100644
--- a/configs/wetek-core2_defconfig
+++ b/configs/wetek-core2_defconfig
@@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxm-wetek-core2"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_MESON_GXM=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" wetek-core2"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
diff --git a/configs/wetek-hub_defconfig b/configs/wetek-hub_defconfig
index 85cff73f50f..ee5558f220b 100644
--- a/configs/wetek-hub_defconfig
+++ b/configs/wetek-hub_defconfig
@@ -9,10 +9,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxbb-wetek-hub"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" wetek-hub"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
diff --git a/configs/wetek-play2_defconfig b/configs/wetek-play2_defconfig
index efdf820165b..ee7e03643b0 100644
--- a/configs/wetek-play2_defconfig
+++ b/configs/wetek-play2_defconfig
@@ -9,10 +9,10 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxbb-wetek-play2"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" wetek-play2"
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig
index e7da0de5df1..368b3896fc2 100644
--- a/configs/work_92105_defconfig
+++ b/configs/work_92105_defconfig
@@ -20,9 +20,9 @@ CONFIG_SPL_TEXT_BASE=0x00000000
 CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0xfff8
+CONFIG_SYS_LOAD_ADDR=0x80008000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x120000
-CONFIG_SYS_LOAD_ADDR=0x80008000
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS2,115200n8"
diff --git a/configs/x3_t30_defconfig b/configs/x3_t30_defconfig
index c489d59ef0e..53b1fd9d5b2 100644
--- a/configs/x3_t30_defconfig
+++ b/configs/x3_t30_defconfig
@@ -10,11 +10,11 @@ CONFIG_ENV_OFFSET=0xFFFFD000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-lg-p880"
 CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_X3_T30=y
 CONFIG_TEGRA_ENABLE_UARTD=y
 CONFIG_CMD_EBTUPDATE=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
diff --git a/configs/x530_defconfig b/configs/x530_defconfig
index 3cd8ef5f9f3..c1fb90d346d 100644
--- a/configs/x530_defconfig
+++ b/configs/x530_defconfig
@@ -19,10 +19,11 @@ CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_ENV_ADDR=0x100000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
@@ -74,7 +75,6 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_PXA3XX=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
diff --git a/configs/xenguest_arm64_defconfig b/configs/xenguest_arm64_defconfig
index 6d040c2c15c..64e8eb2d81f 100644
--- a/configs/xenguest_arm64_defconfig
+++ b/configs/xenguest_arm64_defconfig
@@ -6,9 +6,9 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEFAULT_DEVICE_TREE="xenguest-arm64"
-CONFIG_IDENT_STRING=" xenguest"
-CONFIG_SYS_LOAD_ADDR=0x40000000
 CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x40000000
+CONFIG_IDENT_STRING=" xenguest"
 CONFIG_BOOTDELAY=10
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=1051
diff --git a/configs/xenguest_arm64_virtio_defconfig b/configs/xenguest_arm64_virtio_defconfig
index d00a1ba0143..b5e9b390683 100644
--- a/configs/xenguest_arm64_virtio_defconfig
+++ b/configs/xenguest_arm64_virtio_defconfig
@@ -6,11 +6,11 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEFAULT_DEVICE_TREE="xenguest-arm64"
-CONFIG_IDENT_STRING=" xenguest"
+CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_SYS_LOAD_ADDR=0x40000000
+CONFIG_IDENT_STRING=" xenguest"
 CONFIG_SYS_PCI_64BIT=y
 CONFIG_PCI=y
-CONFIG_SYS_BOOTM_LEN=0x800000
 CONFIG_BOOTDELAY=10
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_PBSIZE=1051
diff --git a/configs/xilinx_mbv32_defconfig b/configs/xilinx_mbv32_defconfig
index 9364dcebb6f..3983b20c2d8 100644
--- a/configs/xilinx_mbv32_defconfig
+++ b/configs/xilinx_mbv32_defconfig
@@ -8,13 +8,13 @@ CONFIG_DEFAULT_DEVICE_TREE="xilinx-mbv32"
 CONFIG_SPL_STACK=0x20200000
 CONFIG_SPL_BSS_START_ADDR=0x24000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x20200000
 CONFIG_SPL_SIZE_LIMIT=0x40000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0x40600000
 CONFIG_DEBUG_UART_CLOCK=1000000
 CONFIG_SYS_CLK_FREQ=100000000
 CONFIG_BOOT_SCRIPT_OFFSET=0x0
-CONFIG_SYS_LOAD_ADDR=0x20200000
 CONFIG_DEBUG_UART=y
 CONFIG_TARGET_XILINX_MBV=y
 # CONFIG_SPL_SMP is not set
diff --git a/configs/xilinx_mbv32_smode_defconfig b/configs/xilinx_mbv32_smode_defconfig
index 6b57cc1b9f8..741724f3bda 100644
--- a/configs/xilinx_mbv32_smode_defconfig
+++ b/configs/xilinx_mbv32_smode_defconfig
@@ -8,13 +8,13 @@ CONFIG_DEFAULT_DEVICE_TREE="xilinx-mbv32"
 CONFIG_SPL_STACK=0x20200000
 CONFIG_SPL_BSS_START_ADDR=0x24000000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x20200000
 CONFIG_SPL_SIZE_LIMIT=0x40000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0x40600000
 CONFIG_DEBUG_UART_CLOCK=1000000
 CONFIG_SYS_CLK_FREQ=100000000
 CONFIG_BOOT_SCRIPT_OFFSET=0x0
-CONFIG_SYS_LOAD_ADDR=0x20200000
 CONFIG_TARGET_XILINX_MBV=y
 CONFIG_SPL_OPENSBI_LOAD_ADDR=0x20100000
 CONFIG_RISCV_SMODE=y
diff --git a/configs/xilinx_versal_mini_defconfig b/configs/xilinx_versal_mini_defconfig
index b97bf5e60a9..229a38dc134 100644
--- a/configs/xilinx_versal_mini_defconfig
+++ b/configs/xilinx_versal_mini_defconfig
@@ -11,13 +11,14 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-mini"
+CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_LEGACY_IMAGE_FORMAT is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CBSIZE=1024
@@ -62,5 +63,4 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_MMC is not set
 CONFIG_ARM_DCC=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_versal_mini_emmc0_defconfig b/configs/xilinx_versal_mini_emmc0_defconfig
index 5c949e34442..8cd24f4ef81 100644
--- a/configs/xilinx_versal_mini_emmc0_defconfig
+++ b/configs/xilinx_versal_mini_emmc0_defconfig
@@ -11,10 +11,11 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc0"
-# CONFIG_PSCI_RESET is not set
 CONFIG_SYS_LOAD_ADDR=0x8000000
+# CONFIG_PSCI_RESET is not set
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CBSIZE=1024
 CONFIG_SYS_PBSIZE=1049
@@ -62,5 +63,4 @@ CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_ARM_DCC=y
 CONFIG_FAT_WRITE=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_versal_mini_emmc1_defconfig b/configs/xilinx_versal_mini_emmc1_defconfig
index 04cba5bc72d..e868d476db5 100644
--- a/configs/xilinx_versal_mini_emmc1_defconfig
+++ b/configs/xilinx_versal_mini_emmc1_defconfig
@@ -11,10 +11,11 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc1"
-# CONFIG_PSCI_RESET is not set
 CONFIG_SYS_LOAD_ADDR=0x8000000
+# CONFIG_PSCI_RESET is not set
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CBSIZE=1024
 CONFIG_SYS_PBSIZE=1049
@@ -62,5 +63,4 @@ CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_ARM_DCC=y
 CONFIG_FAT_WRITE=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_versal_mini_ospi_defconfig b/configs/xilinx_versal_mini_ospi_defconfig
index 8f162597603..eecbc12f809 100644
--- a/configs/xilinx_versal_mini_ospi_defconfig
+++ b/configs/xilinx_versal_mini_ospi_defconfig
@@ -12,13 +12,14 @@ CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_ENV_SIZE=0x80
 # CONFIG_DM_GPIO is not set
 CONFIG_DEFAULT_DEVICE_TREE="versal-mini-ospi-single"
+CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 CONFIG_VERSAL_NO_DDR=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_LTO=y
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_CPUINFO is not set
@@ -72,5 +73,4 @@ CONFIG_CADENCE_QSPI=y
 CONFIG_HAS_CQSPI_REF_CLK=y
 CONFIG_CQSPI_REF_CLK=200000000
 CONFIG_CADENCE_OSPI_VERSAL=y
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_versal_mini_qspi_defconfig b/configs/xilinx_versal_mini_qspi_defconfig
index 8fbde1c7d3c..3c0adcde34e 100644
--- a/configs/xilinx_versal_mini_qspi_defconfig
+++ b/configs/xilinx_versal_mini_qspi_defconfig
@@ -10,13 +10,14 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xFFFE0000
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-mini-qspi-single"
+CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 CONFIG_VERSAL_NO_DDR=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_LTO=y
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_LOGLEVEL=0
@@ -76,5 +77,4 @@ CONFIG_ARM_DCC=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_versal_net_mini_defconfig b/configs/xilinx_versal_net_mini_defconfig
index d6ebd080463..ba656c9441f 100644
--- a/configs/xilinx_versal_net_mini_defconfig
+++ b/configs/xilinx_versal_net_mini_defconfig
@@ -13,13 +13,14 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF10000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini"
+CONFIG_SYS_LOAD_ADDR=0xBBF00000
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0xBBF00000
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_LEGACY_IMAGE_FORMAT is not set
 # CONFIG_AUTOBOOT is not set
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
@@ -71,5 +72,4 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ARM_DCC=y
 CONFIG_PL01X_SERIAL=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_versal_net_mini_emmc_defconfig b/configs/xilinx_versal_net_mini_emmc_defconfig
index fc88eee10af..61b0b2a1c97 100644
--- a/configs/xilinx_versal_net_mini_emmc_defconfig
+++ b/configs/xilinx_versal_net_mini_emmc_defconfig
@@ -9,10 +9,11 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini-emmc"
-# CONFIG_PSCI_RESET is not set
 CONFIG_SYS_LOAD_ADDR=0x8000000
+# CONFIG_PSCI_RESET is not set
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_CPUINFO is not set
@@ -58,5 +59,4 @@ CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_ARM_DCC=y
 CONFIG_FAT_WRITE=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_versal_net_mini_ospi_defconfig b/configs/xilinx_versal_net_mini_ospi_defconfig
index 872a4a55952..6dc82bc0d96 100644
--- a/configs/xilinx_versal_net_mini_ospi_defconfig
+++ b/configs/xilinx_versal_net_mini_ospi_defconfig
@@ -12,12 +12,13 @@ CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_ENV_SIZE=0x80
 # CONFIG_DM_GPIO is not set
 CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini-ospi-single"
+CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_LTO=y
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_CPUINFO is not set
@@ -70,5 +71,4 @@ CONFIG_CADENCE_QSPI=y
 CONFIG_HAS_CQSPI_REF_CLK=y
 CONFIG_CQSPI_REF_CLK=200000000
 CONFIG_CADENCE_OSPI_VERSAL=y
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_versal_net_mini_qspi_defconfig b/configs/xilinx_versal_net_mini_qspi_defconfig
index 00319e06102..8d05d99a627 100644
--- a/configs/xilinx_versal_net_mini_qspi_defconfig
+++ b/configs/xilinx_versal_net_mini_qspi_defconfig
@@ -10,12 +10,13 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF20000
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="versal-net-mini-qspi-single"
+CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0xBBF80000
 CONFIG_LTO=y
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_LOGLEVEL=0
@@ -74,5 +75,4 @@ CONFIG_ARM_DCC=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
index 1e09c0808e8..899776e9c7f 100644
--- a/configs/xilinx_versal_net_virt_defconfig
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -8,16 +8,16 @@ CONFIG_SYS_MALLOC_F_LEN=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="xilinx-versal-net-virt"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x6400000
+CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_ENV_OFFSET_REDUND=0x7F00000
 CONFIG_CMD_FRU=y
-CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
 CONFIG_REMAKE_ELF=y
 CONFIG_EFI_HTTP_BOOT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x6400000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=5
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index d08e6af2de3..32c6bcd2078 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -10,17 +10,17 @@ CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_DEFAULT_DEVICE_TREE="xilinx-versal-virt"
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
+CONFIG_SYS_BOOTM_LEN=0x6400000
+CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_ENV_OFFSET_REDUND=0x7F00000
 CONFIG_CMD_FRU=y
 CONFIG_DEFINE_TCM_OCM_MMAP=y
-CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
 CONFIG_REMAKE_ELF=y
 CONFIG_EFI_HTTP_BOOT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_BOOTM_LEN=0x6400000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=5
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index 417973d1041..eaaf105dd69 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -14,11 +14,12 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x100000
 CONFIG_SPL_BSS_MAX_SIZE=0x100000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x3c00000
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0xE40000
 CONFIG_CMD_FRU=y
 CONFIG_CMD_ZYNQ_AES=y
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
 CONFIG_REMAKE_ELF=y
@@ -33,7 +34,6 @@ CONFIG_SPL_FIT_PRINT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_SYS_BOOTM_LEN=0x3c00000
 CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_USE_PREBOOT=y
diff --git a/configs/xilinx_zynqmp_kria_defconfig b/configs/xilinx_zynqmp_kria_defconfig
index 5a07edf5cd2..dd4df0b2da1 100644
--- a/configs/xilinx_zynqmp_kria_defconfig
+++ b/configs/xilinx_zynqmp_kria_defconfig
@@ -17,23 +17,28 @@ CONFIG_SPL_STACK_R_ADDR=0x18000000
 CONFIG_SPL_STACK=0xfffffffc
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x6400000
+CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SPL_SIZE_LIMIT=0x2a000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x2220000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_CMD_FRU=y
-CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_ENV_ADDR=0x2200000
 CONFIG_AHCI=y
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
 CONFIG_REMAKE_ELF=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+CONFIG_EFI_HTTP_BOOT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
-CONFIG_SYS_BOOTM_LEN=0x6400000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
@@ -48,7 +53,6 @@ CONFIG_SPL_FS_LOAD_ARGS_NAME=""
 CONFIG_SPL_FPGA=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x8000000
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
@@ -223,8 +227,3 @@ CONFIG_VIRTIO_BLK=y
 CONFIG_PANIC_HANG=y
 CONFIG_TPM=y
 CONFIG_SPL_GZIP=y
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
-CONFIG_EFI_HTTP_BOOT=y
diff --git a/configs/xilinx_zynqmp_mini_defconfig b/configs/xilinx_zynqmp_mini_defconfig
index 4b45074efc4..1e76692e4da 100644
--- a/configs/xilinx_zynqmp_mini_defconfig
+++ b/configs/xilinx_zynqmp_mini_defconfig
@@ -8,11 +8,12 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000
 CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini"
-CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_LEGACY_IMAGE_FORMAT is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_SYS_CBSIZE=1024
@@ -60,5 +61,4 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ARM_DCC=y
 CONFIG_PANIC_HANG=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig
index 49c7235fb8c..391b6f4207c 100644
--- a/configs/xilinx_zynqmp_mini_emmc0_defconfig
+++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig
@@ -13,10 +13,11 @@ CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-emmc0"
 CONFIG_SPL_STACK=0xfffffffc
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x600
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_SPL=y
 CONFIG_REMAKE_ELF=y
 # CONFIG_MP is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 # CONFIG_AUTOBOOT is not set
@@ -74,5 +75,4 @@ CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_ARM_DCC=y
 CONFIG_PANIC_HANG=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig
index 1ef89f50444..132210bee62 100644
--- a/configs/xilinx_zynqmp_mini_emmc1_defconfig
+++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig
@@ -13,10 +13,11 @@ CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-emmc1"
 CONFIG_SPL_STACK=0xfffffffc
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x600
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
-CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_SPL=y
 CONFIG_REMAKE_ELF=y
 # CONFIG_MP is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 # CONFIG_AUTOBOOT is not set
@@ -74,5 +75,4 @@ CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_ARM_DCC=y
 CONFIG_PANIC_HANG=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_mini_nand_defconfig b/configs/xilinx_zynqmp_mini_nand_defconfig
index b4719536be1..1de6b00923d 100644
--- a/configs/xilinx_zynqmp_mini_nand_defconfig
+++ b/configs/xilinx_zynqmp_mini_nand_defconfig
@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
 CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_REMAKE_ELF=y
 # CONFIG_MP is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 # CONFIG_AUTOBOOT is not set
@@ -60,5 +61,4 @@ CONFIG_SYS_NAND_MAX_CHIPS=2
 CONFIG_ARM_DCC=y
 CONFIG_PANIC_HANG=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_mini_nand_single_defconfig b/configs/xilinx_zynqmp_mini_nand_single_defconfig
index 7ede17654dd..8c67786f68d 100644
--- a/configs/xilinx_zynqmp_mini_nand_single_defconfig
+++ b/configs/xilinx_zynqmp_mini_nand_single_defconfig
@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
 CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_REMAKE_ELF=y
 # CONFIG_MP is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_FIT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 # CONFIG_AUTOBOOT is not set
@@ -59,5 +60,4 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_ARM_DCC=y
 CONFIG_PANIC_HANG=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig
index 0d79ecece71..1a2dafe4738 100644
--- a/configs/xilinx_zynqmp_mini_qspi_defconfig
+++ b/configs/xilinx_zynqmp_mini_qspi_defconfig
@@ -11,15 +11,16 @@ CONFIG_ENV_SIZE=0x80
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-qspi"
 CONFIG_SPL_STACK=0xfffffffc
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SPL=y
 # CONFIG_SPL_FS_FAT is not set
 # CONFIG_SPL_LIBDISK_SUPPORT is not set
 CONFIG_SYS_MEM_RSVD_FOR_MMU=y
 CONFIG_ZYNQMP_NO_DDR=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x8000000
 # CONFIG_EXPERT is not set
 CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_LEGACY_IMAGE_FORMAT is not set
 # CONFIG_AUTOBOOT is not set
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
@@ -92,5 +93,4 @@ CONFIG_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
 CONFIG_PANIC_HANG=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/xilinx_zynqmp_r5_defconfig b/configs/xilinx_zynqmp_r5_defconfig
index bbffc1164ea..b9d7797e4b7 100644
--- a/configs/xilinx_zynqmp_r5_defconfig
+++ b/configs/xilinx_zynqmp_r5_defconfig
@@ -7,12 +7,13 @@ CONFIG_SYS_MALLOC_F_LEN=0x1000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-r5"
+CONFIG_SYS_BOOTM_LEN=0x3c00000
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART_BASE=0xff010000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_CPU_FREQ_HZ=500000000
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_BOOTM_LEN=0x3c00000
+# CONFIG_EFI_LOADER is not set
 CONFIG_BOOTSTAGE=y
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=284
@@ -27,4 +28,3 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_TIMER=y
 CONFIG_CADENCE_TTC_TIMER=y
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 19d4b2f6921..ff8ab344595 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -12,13 +12,14 @@ CONFIG_SPL_STACK_R_ADDR=0x18000000
 CONFIG_SPL_STACK=0xfffffffc
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x6400000
+CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_SPL_SIZE_LIMIT=0x2a000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x1E80000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_CMD_FRU=y
-CONFIG_SYS_LOAD_ADDR=0x8000000
 CONFIG_AHCI=y
 CONFIG_SYS_MEMTEST_START=0x00000000
 CONFIG_SYS_MEMTEST_END=0x00001000
@@ -32,7 +33,6 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
-CONFIG_SYS_BOOTM_LEN=0x6400000
 CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_USE_PREBOOT=y
diff --git a/configs/zynq_cse_nand_defconfig b/configs/zynq_cse_nand_defconfig
index 750ea0db2b2..d95e69712b0 100644
--- a/configs/zynq_cse_nand_defconfig
+++ b/configs/zynq_cse_nand_defconfig
@@ -16,13 +16,14 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_SPL=y
 # CONFIG_SPL_FS_FAT is not set
 # CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
 CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_CBSIZE=1024
@@ -79,5 +80,4 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_ARM_DCC=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig
index 3155fe0b378..fbec4a6ab25 100644
--- a/configs/zynq_cse_nor_defconfig
+++ b/configs/zynq_cse_nor_defconfig
@@ -16,13 +16,14 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_SPL=y
 # CONFIG_SPL_FS_FAT is not set
 # CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
 CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_CBSIZE=1024
@@ -83,5 +84,4 @@ CONFIG_SYS_FLASH_QUIET_TEST=y
 CONFIG_ARM_DCC=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig
index f2e1aa6d3ab..53c7edf8bb7 100644
--- a/configs/zynq_cse_qspi_defconfig
+++ b/configs/zynq_cse_qspi_defconfig
@@ -17,6 +17,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x20000
 CONFIG_SPL_BSS_MAX_SIZE=0x8000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0x0
 CONFIG_DEBUG_UART_CLOCK=0
@@ -24,11 +25,11 @@ CONFIG_DEBUG_UART_CLOCK=0
 # CONFIG_SPL_LIBDISK_SUPPORT is not set
 # CONFIG_ZYNQ_DDRC_INIT is not set
 # CONFIG_CMD_ZYNQ is not set
-CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART=y
 CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
 CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+# CONFIG_EFI_LOADER is not set
 # CONFIG_AUTOBOOT is not set
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_USE_PREBOOT=y
@@ -93,5 +94,4 @@ CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_QSPI=y
 CONFIG_SYS_TIMER_COUNTS_DOWN=y
 # CONFIG_GZIP is not set
-# CONFIG_EFI_LOADER is not set
 # CONFIG_LMB is not set
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 84caff8a24d..96fa49d697b 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -73,15 +73,15 @@ Building
 
    - Compile ATF
 
-     => git clone https://github.com/ARM-software/arm-trusted-firmware.git
-     => cd arm-trusted-firmware
+     => git clone https://github.com/TrustedFirmware-A/trusted-firmware-a.git
+     => cd trusted-firmware-a
 
      (export cross compiler path for Cortex-M0 MCU likely arm-none-eabi-)
      => make realclean
      => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
 
     (export bl31.elf)
-    => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.elf
+    => export BL31=/path/to/trusted-firmware-a/build/rk3399/release/bl31/bl31.elf
 
    - Compile PMU M0 firmware
 
diff --git a/doc/README.uniphier b/doc/README.uniphier
index af746f6c316..9f72cfa67b5 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -104,7 +104,7 @@ U-Boot serves as a non-secure boot loader loaded by [ARM Trusted Firmware],
 so you need to provide the `u-boot.bin` to the build command of ARM Trusted
 Firmware.
 
-[ARM Trusted Firmware]: https://github.com/ARM-software/arm-trusted-firmware
+[ARM Trusted Firmware]: https://github.com/TrustedFirmware-A/trusted-firmware-a
 
 
 Verified Boot
diff --git a/doc/board/armltd/juno.rst b/doc/board/armltd/juno.rst
index 761c037f92b..478f826f08a 100644
--- a/doc/board/armltd/juno.rst
+++ b/doc/board/armltd/juno.rst
@@ -110,5 +110,5 @@ to the ``SOFTWARE/`` directory of the SD card.
 
 .. _`Juno development board`: https://developer.arm.com/tools-and-software/development-boards/juno-development-board
 .. _`V2M-Juno TRM`: https://developer.arm.com/documentation/100113/latest
-.. _`fiptool`: https://github.com/ARM-software/arm-trusted-firmware/tree/master/tools/fiptool
+.. _`fiptool`: https://github.com/TrustedFirmware-A/trusted-firmware-a/tree/master/tools/fiptool
 .. _`SCP firmware`: https://github.com/ARM-software/SCP-firmware.git
diff --git a/doc/board/bsh/imx8mn_bsh_smm_s2.rst b/doc/board/bsh/imx8mn_bsh_smm_s2.rst
index 2e85c1a2181..1db1c8299c7 100644
--- a/doc/board/bsh/imx8mn_bsh_smm_s2.rst
+++ b/doc/board/bsh/imx8mn_bsh_smm_s2.rst
@@ -17,7 +17,7 @@ Get and Build the ARM Trusted firmware
 --------------------------------------
 
 Note: srctree is U-Boot source directory
-Get ATF from: https://github.com/ARM-software/arm-trusted-firmware
+Get ATF from: https://github.com/TrustedFirmware-A/trusted-firmware-a
 tag: v2.5
 
 .. code-block:: bash
diff --git a/doc/board/hisilicon/hikey.rst b/doc/board/hisilicon/hikey.rst
index 8038a24fe16..aec36f34c8f 100644
--- a/doc/board/hisilicon/hikey.rst
+++ b/doc/board/hisilicon/hikey.rst
@@ -41,7 +41,7 @@ First get all the sources
   mkdir -p ~/hikey/src ~/hikey/bin
   cd ~/hikey/src
   git clone https://github.com/96boards-hikey/edk2 -b testing/hikey960_v2.5
-  git clone https://github.com/ARM-software/arm-trusted-firmware
+  git clone https://github.com/TrustedFirmware-A/trusted-firmware-a
   git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
   git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
   git clone https://github.com/96boards-hikey/atf-fastboot
@@ -75,7 +75,7 @@ Compile ARM Trusted Firmware (ATF)
 
 .. code-block:: bash
 
-  cd ~/hikey/src/arm-trusted-firmware
+  cd ~/hikey/src/trusted-firmware-a
   make CROSS_COMPILE=aarch64-linux-gnu- all fip \
     SCP_BL2=~/hikey/bin/mcuimage.bin \
     BL33=~/hikey/bin/u-boot.bin DEBUG=1 PLAT=hikey
@@ -100,8 +100,8 @@ Compile l-loader
 .. code-block:: bash
 
   cd ~/hikey/src/l-loader
-  ln -sf ~/hikey/src/arm-trusted-firmware/build/hikey/debug/bl1.bin
-  ln -sf ~/hikey/src/arm-trusted-firmware/build/hikey/debug/bl2.bin
+  ln -sf ~/hikey/src/trusted-firmware-a/build/hikey/debug/bl1.bin
+  ln -sf ~/hikey/src/trusted-firmware-a/build/hikey/debug/bl2.bin
   ln -sf ~/hikey/src/atf-fastboot/build/hikey/debug/bl1.bin fastboot.bin
   make hikey PTABLE_LST=aosp-8g
 
@@ -114,7 +114,7 @@ Copy the resulting binaries
   cp recovery.bin ~/hikey/bin
 
 These instructions are adapted from
-https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey.rst
+https://github.com/TrustedFirmware-A/trusted-firmware-a/blob/master/docs/plat/hikey.rst
 
 Flashing
 ========
diff --git a/doc/board/hisilicon/hikey960.rst b/doc/board/hisilicon/hikey960.rst
index 93e983b99f1..de846f60f71 100644
--- a/doc/board/hisilicon/hikey960.rst
+++ b/doc/board/hisilicon/hikey960.rst
@@ -32,7 +32,7 @@ First get all the sources
 
   mkdir -p ~/hikey960/src ~/hikey960/bin
   cd ~/hikey960/src
-  git clone https://github.com/ARM-software/arm-trusted-firmware
+  git clone https://github.com/TrustedFirmware-A/trusted-firmware-a
   git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
   git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
   wget http://snapshots.linaro.org/reference-platform/components/uefi-staging/123/hikey960/release/config
@@ -64,7 +64,7 @@ Compile ARM Trusted Firmware (ATF)
 
 .. code-block:: bash
 
-  cd ~/hikey960/src/arm-trusted-firmware
+  cd ~/hikey960/src/trusted-firmware-a
   make CROSS_COMPILE=aarch64-linux-gnu- all fip \
     SCP_BL2=~/hikey960/bin/lpm3.img \
     BL33=~/hikey960/bin/u-boot.bin DEBUG=1 PLAT=hikey960
@@ -81,9 +81,9 @@ Compile l-loader
 .. code-block:: bash
 
   cd ~/hikey960/src/l-loader
-  ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl1.bin
-  ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl2.bin
-  ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/fip.bin
+  ln -sf ~/hikey960/src/trusted-firmware-a/build/hikey960/debug/bl1.bin
+  ln -sf ~/hikey960/src/trusted-firmware-a/build/hikey960/debug/bl2.bin
+  ln -sf ~/hikey960/src/trusted-firmware-a/build/hikey960/debug/fip.bin
   ln -sf ~/hikey960/bin/u-boot.bin
   make hikey960 PTABLE_LST=linux-32g NS_BL1U=u-boot.bin
 
@@ -95,7 +95,7 @@ Copy the resulting binaries
   cp l-loader.bin ~/hikey960/bin
 
 These instructions are adapted from
-https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey960.rst
+https://github.com/TrustedFirmware-A/trusted-firmware-a/blob/master/docs/plat/hikey960.rst
 
 Setup console
 =============
diff --git a/doc/board/kontron/pitx-imx8m.rst b/doc/board/kontron/pitx-imx8m.rst
index 1f64cbd9b2e..b90221b165e 100644
--- a/doc/board/kontron/pitx-imx8m.rst
+++ b/doc/board/kontron/pitx-imx8m.rst
@@ -25,7 +25,8 @@ Note: builddir is U-Boot build directory (source directory for in-tree builds)
 
 .. code-block:: bash
 
-    $ git clone https://github.com/ARM-software/arm-trusted-firmware.git
+    $ git clone https://github.com/TrustedFirmware-A/trusted-firmware-a.git
+    $ cd trusted-firmware-a
     $ git checkout v2.5
     $ make PLAT=imx8mq ARCH=aarch64 CROSS_COMPILE=aarch64-linux-gnu- bl31
     $ cp build/imx8mq/release/bl31.bin $(builddir)
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index 0f9cb404d93..86d83befb5b 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -166,8 +166,8 @@ To build TF-A:
 
 .. code-block:: bash
 
-        git clone --depth 1 https://github.com/ARM-software/arm-trusted-firmware.git
-        cd arm-trusted-firmware
+        git clone --depth 1 https://github.com/TrustedFirmware-A/trusted-firmware-a.git
+        cd trusted-firmware-a
         make realclean
         make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399
         cd ..
@@ -199,7 +199,7 @@ To build px30 boards:
 
 .. code-block:: bash
 
-        export BL31=../arm-trusted-firmware/build/px30/release/bl31/bl31.elf
+        export BL31=../trusted-firmware-a/build/px30/release/bl31/bl31.elf
         make evb-px30_defconfig
         make CROSS_COMPILE=aarch64-linux-gnu-
 
@@ -230,7 +230,7 @@ To build rk3328 boards:
 
 .. code-block:: bash
 
-        export BL31=../arm-trusted-firmware/build/rk3328/release/bl31/bl31.elf
+        export BL31=../trusted-firmware-a/build/rk3328/release/bl31/bl31.elf
         make evb-rk3328_defconfig
         make CROSS_COMPILE=aarch64-linux-gnu-
 
@@ -238,7 +238,7 @@ To build rk3368 boards:
 
 .. code-block:: bash
 
-        export BL31=../arm-trusted-firmware/build/rk3368/release/bl31/bl31.elf
+        export BL31=../trusted-firmware-a/build/rk3368/release/bl31/bl31.elf
         make evb-px5_defconfig
         make CROSS_COMPILE=aarch64-linux-gnu-
 
@@ -246,7 +246,7 @@ To build rk3399 boards:
 
 .. code-block:: bash
 
-        export BL31=../arm-trusted-firmware/build/rk3399/release/bl31/bl31.elf
+        export BL31=../trusted-firmware-a/build/rk3399/release/bl31/bl31.elf
         make evb-rk3399_defconfig
         make CROSS_COMPILE=aarch64-linux-gnu-
 
@@ -254,7 +254,7 @@ To build rk3568 boards:
 
 .. code-block:: bash
 
-        export BL31=../arm-trusted-firmware/build/rk3568/release/bl31/bl31.elf
+        export BL31=../trusted-firmware-a/build/rk3568/release/bl31/bl31.elf
         [or]export BL31=../rkbin/bin/rk35/rk3568_bl31_v1.34.elf
         export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3568_ddr_1560MHz_v1.13.bin
         make evb-rk3568_defconfig
diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst
index b9d35244d44..51dab839ddd 100644
--- a/doc/board/ti/am62x_sk.rst
+++ b/doc/board/ti/am62x_sk.rst
@@ -132,6 +132,20 @@ DFU support (and disable storage support)
 .. include::  ../ti/k3.rst
     :start-after: .. k3_rst_include_start_build_steps_uboot
     :end-before: .. k3_rst_include_end_build_steps_uboot
+
+* 3.2.1 Alternative build of A53 for Android bootflow:
+
+Since the Android requires many more dependencies, it is disabled by default.
+An extra config fragment should be used to enable Android bootflow support.
+
+.. prompt:: bash $
+
+  export UBOOT_CFG_CORTEXR="${UBOOT_CFG_CORTEXA} am62x_a53_android.config"
+
+.. include::  ../ti/k3.rst
+    :start-after: .. k3_rst_include_start_build_steps_uboot
+    :end-before: .. k3_rst_include_end_build_steps_uboot
+
 .. am62x_evm_rst_include_end_build_steps
 
 Target Images
diff --git a/doc/board/variscite/imx8mn_var_som.rst b/doc/board/variscite/imx8mn_var_som.rst
index aca881ea314..1b656f0be5f 100644
--- a/doc/board/variscite/imx8mn_var_som.rst
+++ b/doc/board/variscite/imx8mn_var_som.rst
@@ -17,7 +17,7 @@ Get and Build the ARM Trusted firmware
 --------------------------------------
 
 Note: srctree is U-Boot source directory
-Get ATF from: https://github.com/ARM-software/arm-trusted-firmware
+Get ATF from: https://github.com/TrustedFirmware-A/trusted-firmware-a
 tag: v2.5
 
 .. code-block:: bash
diff --git a/doc/develop/release_cycle.rst b/doc/develop/release_cycle.rst
index de1d3045b44..9340e9c4311 100644
--- a/doc/develop/release_cycle.rst
+++ b/doc/develop/release_cycle.rst
@@ -51,13 +51,14 @@ Examples::
 Current Status
 --------------
 
-* U-Boot v2024.07 was released on Mon 01 July 2024.
+* U-Boot v2024.10 was released on Mon 07 October 2024.
 
-* The Merge Window for the next release (v2024.10) is **closed**.
+* The Merge Window for the next release (v2025.01) is **open** until the -rc1
+  release on Mon 28 October 2024.
 
-* The next branch is now **open**.
+* The next branch is now **closed**.
 
-* Release "v2024.10" is scheduled for 07 October 2024.
+* Release "v2025.01" is scheduled for 06 January 2025.
 
 Future Releases
 ---------------
@@ -65,31 +66,31 @@ Future Releases
 .. The following commented out dates are for when release candidates are
    planned to be tagged.
 
-For the next scheduled release, release candidates were made on::
+.. For the next scheduled release, release candidates were made on::
 
-* U-Boot v2024.10-rc1 was released on Mon 22 July 2024.
+.. * U-Boot v2025.01-rc1 was released on Mon 28 October 2024.
 
-* U-Boot v2024.10-rc2 was released on Mon 05 August 2024.
+.. * U-Boot v2025.01-rc2 was released on Mon 11 November 2024.
 
-* U-Boot v2024.10-rc3 was released on Mon 19 August 2024.
+.. * U-Boot v2025.01-rc3 was released on Mon 25 November 2024.
 
-* U-Boot v2024.10-rc4 was released on Mon 02 September 2024.
+.. * U-Boot v2025.01-rc4 was released on Mon 09 December 2024.
 
-.. * U-Boot v2024.10-rc5 was released on Mon 16 September 2024.
+.. * U-Boot v2025.01-rc5 was released on Mon 23 December 2024.
 
-.. * U-Boot v2024.10-rc6 was released on Mon 30 September 2024.
+.. * U-Boot v2025.01-rc6 was released on Mon 30 December 2024.
 
 Please note that the following dates are planned only and may be deviated from
 as needed.
 
-* "v2024.10": end of MW = Mon, Jul 22, 2024; release = Mon, Oct 07, 2024
-
 * "v2025.01": end of MW = Mon, Oct 21, 2024; release = Mon, Jan 06, 2025
 
 * "v2025.04": end of MW = Mon, Jan 27, 2025; release = Mon, Apr 07, 2025
 
 * "v2025.07": end of MW = Mon, Apr 21, 2025; release = Mon, Jul 07, 2025
 
+* "v2025.10": end of MW = Mon, Jul 21, 2025; release = Mon, Oct 06, 2025
+
 Previous Releases
 -----------------
 
@@ -97,6 +98,8 @@ Note: these statistics are generated by our fork of `gitdm
 <https://source.denx.de/u-boot/gitdm>`_, which was originally created by
 Jonathan Corbet.
 
+* :doc:`statistics/u-boot-stats-v2024.10` which was released on 07 October 2024.
+
 * :doc:`statistics/u-boot-stats-v2024.07` which was released on 01 July 2024.
 
 * :doc:`statistics/u-boot-stats-v2024.04` which was released on 02 April 2024.
diff --git a/doc/develop/statistics/u-boot-stats-v2024.10.rst b/doc/develop/statistics/u-boot-stats-v2024.10.rst
new file mode 100644
index 00000000000..4be08ea4fd7
--- /dev/null
+++ b/doc/develop/statistics/u-boot-stats-v2024.10.rst
@@ -0,0 +1,736 @@
+:orphan:
+
+Release Statistics for U-Boot v2024.10
+======================================
+
+* Processed 1225 changesets from 153 developers
+
+* 27 employers found
+
+* A total of 195213 lines added, 100674 removed (delta 94539)
+
+.. table:: Developers with the most changesets
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   Marek Vasut                           197 (16.1%)
+   Simon Glass                           111 (9.1%)
+   Heinrich Schuchardt                   58 (4.7%)
+   Tom Rini                              56 (4.6%)
+   Quentin Schulz                        42 (3.4%)
+   Jonathan Humphreys                    38 (3.1%)
+   Caleb Connolly                        36 (2.9%)
+   Jonas Karlman                         30 (2.4%)
+   Marek Behún                           30 (2.4%)
+   Michal Simek                          26 (2.1%)
+   Christian Marangi                     26 (2.1%)
+   Sughosh Ganu                          25 (2.0%)
+   Jayesh Choudhary                      22 (1.8%)
+   Rasmus Villemoes                      21 (1.7%)
+   Wadim Egorov                          17 (1.4%)
+   Robert Marko                          15 (1.2%)
+   Daniel Schultz                        15 (1.2%)
+   Fabio Estevam                         14 (1.1%)
+   Hou Zhiqiang                          14 (1.1%)
+   Jiaxun Yang                           14 (1.1%)
+   Ilias Apalodimas                      13 (1.1%)
+   Dhruva Gole                           13 (1.1%)
+   Manorit Chawdhry                      13 (1.1%)
+   Neil Armstrong                        12 (1.0%)
+   Mattijs Korpershoek                   11 (0.9%)
+   FUKAUMI Naoki                         11 (0.9%)
+   Tim Harvey                            11 (0.9%)
+   Michael Trimarchi                     10 (0.8%)
+   Andre Przywara                        10 (0.8%)
+   Venkatesh Yadav Abbarapu              10 (0.8%)
+   Heiko Stuebner                        9 (0.7%)
+   Alexey Romanov                        9 (0.7%)
+   Neha Malcom Francis                   9 (0.7%)
+   Emanuele Ghidoli                      9 (0.7%)
+   Sebastian Kropatsch                   8 (0.7%)
+   Roger Quadros                         7 (0.6%)
+   Michael Walle                         7 (0.6%)
+   Alexander Dahl                        7 (0.6%)
+   Maxim Moskalets                       7 (0.6%)
+   Svyatoslav Ryhel                      7 (0.6%)
+   Sam Protsenko                         6 (0.5%)
+   Anatolij Gustschin                    6 (0.5%)
+   Benjamin Hahn                         6 (0.5%)
+   Sjoerd Simons                         6 (0.5%)
+   Emil Kronborg                         5 (0.4%)
+   Gary Bisson                           5 (0.4%)
+   Yannic Moog                           5 (0.4%)
+   Raymond Mao                           5 (0.4%)
+   Heesub Shin                           5 (0.4%)
+   Matthias Schiffer                     5 (0.4%)
+   Udit Kumar                            4 (0.3%)
+   Lukas Funke                           4 (0.3%)
+   Prasad Kummari                        4 (0.3%)
+   Brandon Maier                         4 (0.3%)
+   Tony Dinh                             4 (0.3%)
+   Sebastian Reichel                     4 (0.3%)
+   Hari Nagalla                          4 (0.3%)
+   Peter Robinson                        3 (0.2%)
+   Sean Anderson                         3 (0.2%)
+   Fedor Ross                            3 (0.2%)
+   Nishanth Menon                        3 (0.2%)
+   Mikhail Kshevetskiy                   3 (0.2%)
+   Teresa Remmet                         3 (0.2%)
+   Vincent Stehlé                        3 (0.2%)
+   Vasileios Amoiridis                   3 (0.2%)
+   Anand Moon                            3 (0.2%)
+   Jianfeng Liu                          3 (0.2%)
+   WHR                                   3 (0.2%)
+   Jerome Forissier                      2 (0.2%)
+   Andrew Davis                          2 (0.2%)
+   David Virag                           2 (0.2%)
+   Manikanta Guntupalli                  2 (0.2%)
+   Philip Oberfichtner                   2 (0.2%)
+   Michael Polyntsov                     2 (0.2%)
+   Christophe Leroy                      2 (0.2%)
+   Sam Povilus                           2 (0.2%)
+   Adam Ford                             2 (0.2%)
+   Marek Mojík                           2 (0.2%)
+   Marjolaine Amate                      2 (0.2%)
+   Sam Day                               2 (0.2%)
+   Jonas Schwöbel                        2 (0.2%)
+   Martin Kurbanov                       2 (0.2%)
+   Patrick Barsanti                      2 (0.2%)
+   MD Danish Anwar                       2 (0.2%)
+   Nathan Morrisson                      2 (0.2%)
+   Love Kumar                            2 (0.2%)
+   Roman Stratiienko                     2 (0.2%)
+   Beleswar Padhi                        2 (0.2%)
+   Jim Liu                               2 (0.2%)
+   Peter Hoyes                           2 (0.2%)
+   Siddharth Vadapalli                   1 (0.1%)
+   Kever Yang                            1 (0.1%)
+   Patrice Chotard                       1 (0.1%)
+   Bryan Brattlof                        1 (0.1%)
+   Thomas Perrot                         1 (0.1%)
+   Leo Yu-Chi Liang                      1 (0.1%)
+   Maxim Kochetkov                       1 (0.1%)
+   Joshua Watt                           1 (0.1%)
+   Brian Norris                          1 (0.1%)
+   Hugues Kamba Mpiana                   1 (0.1%)
+   Max Krummenacher                      1 (0.1%)
+   Ravi Minnikanti                       1 (0.1%)
+   Alexey Charkov                        1 (0.1%)
+   Dragan Simic                          1 (0.1%)
+   Ricardo Pardini                       1 (0.1%)
+   Trevor Woerner                        1 (0.1%)
+   Seung-Woo Kim                         1 (0.1%)
+   Vishal Patel                          1 (0.1%)
+   Lukasz Majewski                       1 (0.1%)
+   Jan Kiszka                            1 (0.1%)
+   Alexander Sverdlin                    1 (0.1%)
+   Andrew Goodbody                       1 (0.1%)
+   Sumit Garg                            1 (0.1%)
+   Andreas Schwab                        1 (0.1%)
+   Levi Yun                              1 (0.1%)
+   Leo Yan                               1 (0.1%)
+   Vitor Soares                          1 (0.1%)
+   Jagan Teki                            1 (0.1%)
+   Geert Uytterhoeven                    1 (0.1%)
+   Francois Berder                       1 (0.1%)
+   Dominik Haller                        1 (0.1%)
+   Javier Martinez Canillas              1 (0.1%)
+   John Crispin                          1 (0.1%)
+   Benjamin Schneider                    1 (0.1%)
+   Alexander Stein                       1 (0.1%)
+   Leonard Anderweit                     1 (0.1%)
+   Andrejs Cainikovs                     1 (0.1%)
+   Jonathan Liu                          1 (0.1%)
+   Piotr Wojtaszczyk                     1 (0.1%)
+   Bastian Germann                       1 (0.1%)
+   Alex Shumsky                          1 (0.1%)
+   Harsimran Singh Tungal                1 (0.1%)
+   Christophe Roullier                   1 (0.1%)
+   Neal Frager                           1 (0.1%)
+   Kory Maincent                         1 (0.1%)
+   Charlie Johnston                      1 (0.1%)
+   Jianan Huang                          1 (0.1%)
+   Nitin Yadav                           1 (0.1%)
+   Jing Luo                              1 (0.1%)
+   Niklas Cassel                         1 (0.1%)
+   Diederik de Haas                      1 (0.1%)
+   Boris Brezillon                       1 (0.1%)
+   Dmitry Gerasimov                      1 (0.1%)
+   Yasuharu Shibata                      1 (0.1%)
+   Vignesh Raghavendra                   1 (0.1%)
+   Pratyush Yadav                        1 (0.1%)
+   Brunham, Kalen                        1 (0.1%)
+   Baruch Siach                          1 (0.1%)
+   Aniket Limaye                         1 (0.1%)
+   Claudius Heine                        1 (0.1%)
+   Olaf Mandel                           1 (0.1%)
+   Fiona Klute                           1 (0.1%)
+   ====================================  =====
+
+
+.. table:: Developers with the most changed lines
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   Tom Rini                              122630 (47.6%)
+   Marek Behún                           17921 (7.0%)
+   Jonas Karlman                         8178 (3.2%)
+   Jayesh Choudhary                      8088 (3.1%)
+   Caleb Connolly                        7471 (2.9%)
+   Neha Malcom Francis                   6536 (2.5%)
+   Marek Vasut                           5998 (2.3%)
+   Nishanth Menon                        5595 (2.2%)
+   Sumit Garg                            5246 (2.0%)
+   Manorit Chawdhry                      5027 (2.0%)
+   Jonathan Humphreys                    4229 (1.6%)
+   Quentin Schulz                        4206 (1.6%)
+   Dragan Simic                          3090 (1.2%)
+   Aniket Limaye                         2877 (1.1%)
+   Jonas Schwöbel                        2875 (1.1%)
+   Dhruva Gole                           2778 (1.1%)
+   Simon Glass                           2775 (1.1%)
+   Svyatoslav Ryhel                      2404 (0.9%)
+   Nitin Yadav                           2310 (0.9%)
+   Andre Przywara                        2115 (0.8%)
+   Yannic Moog                           2086 (0.8%)
+   Robert Marko                          2026 (0.8%)
+   Fabio Estevam                         1771 (0.7%)
+   Sebastian Kropatsch                   1764 (0.7%)
+   Heiko Stuebner                        1521 (0.6%)
+   Michal Simek                          1385 (0.5%)
+   Ilias Apalodimas                      1344 (0.5%)
+   Sughosh Ganu                          1247 (0.5%)
+   Heinrich Schuchardt                   1214 (0.5%)
+   Jianfeng Liu                          1041 (0.4%)
+   Mattijs Korpershoek                   873 (0.3%)
+   Jiaxun Yang                           850 (0.3%)
+   Neil Armstrong                        805 (0.3%)
+   Patrick Barsanti                      796 (0.3%)
+   Jim Liu                               789 (0.3%)
+   Alexey Romanov                        714 (0.3%)
+   Geert Uytterhoeven                    713 (0.3%)
+   Sam Povilus                           690 (0.3%)
+   Christian Marangi                     670 (0.3%)
+   Wadim Egorov                          655 (0.3%)
+   Roger Quadros                         646 (0.3%)
+   Sam Protsenko                         506 (0.2%)
+   Rasmus Villemoes                      498 (0.2%)
+   Daniel Schultz                        469 (0.2%)
+   Love Kumar                            447 (0.2%)
+   Venkatesh Yadav Abbarapu              420 (0.2%)
+   John Crispin                          390 (0.2%)
+   Tony Dinh                             360 (0.1%)
+   Michael Trimarchi                     359 (0.1%)
+   Maxim Moskalets                       314 (0.1%)
+   Teresa Remmet                         300 (0.1%)
+   Sjoerd Simons                         272 (0.1%)
+   FUKAUMI Naoki                         268 (0.1%)
+   Anatolij Gustschin                    264 (0.1%)
+   Hou Zhiqiang                          253 (0.1%)
+   Tim Harvey                            240 (0.1%)
+   Ricardo Pardini                       234 (0.1%)
+   Alexander Dahl                        212 (0.1%)
+   Michael Polyntsov                     191 (0.1%)
+   Gary Bisson                           176 (0.1%)
+   Sebastian Reichel                     167 (0.1%)
+   Alexey Charkov                        153 (0.1%)
+   Diederik de Haas                      152 (0.1%)
+   Emil Kronborg                         147 (0.1%)
+   Raymond Mao                           142 (0.1%)
+   Benjamin Hahn                         138 (0.1%)
+   Andrew Davis                          114 (0.0%)
+   Benjamin Schneider                    111 (0.0%)
+   Brandon Maier                         92 (0.0%)
+   Vasileios Amoiridis                   91 (0.0%)
+   Philip Oberfichtner                   79 (0.0%)
+   Trevor Woerner                        72 (0.0%)
+   Andrejs Cainikovs                     68 (0.0%)
+   Sam Day                               67 (0.0%)
+   Christophe Roullier                   67 (0.0%)
+   Lukas Funke                           66 (0.0%)
+   Vitor Soares                          66 (0.0%)
+   Peter Robinson                        65 (0.0%)
+   David Virag                           65 (0.0%)
+   Emanuele Ghidoli                      61 (0.0%)
+   Adam Ford                             61 (0.0%)
+   Peter Hoyes                           58 (0.0%)
+   Fedor Ross                            57 (0.0%)
+   Boris Brezillon                       56 (0.0%)
+   Pratyush Yadav                        55 (0.0%)
+   Piotr Wojtaszczyk                     53 (0.0%)
+   Nathan Morrisson                      52 (0.0%)
+   Michael Walle                         48 (0.0%)
+   Roman Stratiienko                     47 (0.0%)
+   Matthias Schiffer                     46 (0.0%)
+   Hari Nagalla                          45 (0.0%)
+   Christophe Leroy                      41 (0.0%)
+   Maxim Kochetkov                       40 (0.0%)
+   Sean Anderson                         33 (0.0%)
+   Heesub Shin                           28 (0.0%)
+   Marjolaine Amate                      28 (0.0%)
+   Harsimran Singh Tungal                26 (0.0%)
+   Mikhail Kshevetskiy                   25 (0.0%)
+   Charlie Johnston                      24 (0.0%)
+   Niklas Cassel                         24 (0.0%)
+   Dmitry Gerasimov                      23 (0.0%)
+   Anand Moon                            20 (0.0%)
+   WHR                                   19 (0.0%)
+   Bryan Brattlof                        18 (0.0%)
+   Claudius Heine                        17 (0.0%)
+   Alexander Sverdlin                    16 (0.0%)
+   Udit Kumar                            15 (0.0%)
+   Vincent Stehlé                        15 (0.0%)
+   Martin Kurbanov                       15 (0.0%)
+   Brunham, Kalen                        15 (0.0%)
+   Levi Yun                              14 (0.0%)
+   Siddharth Vadapalli                   13 (0.0%)
+   Neal Frager                           13 (0.0%)
+   Patrice Chotard                       12 (0.0%)
+   Fiona Klute                           11 (0.0%)
+   MD Danish Anwar                       10 (0.0%)
+   Beleswar Padhi                        9 (0.0%)
+   Joshua Watt                           9 (0.0%)
+   Lukasz Majewski                       9 (0.0%)
+   Jing Luo                              9 (0.0%)
+   Jerome Forissier                      8 (0.0%)
+   Alex Shumsky                          6 (0.0%)
+   Vignesh Raghavendra                   6 (0.0%)
+   Prasad Kummari                        5 (0.0%)
+   Leo Yu-Chi Liang                      4 (0.0%)
+   Leo Yan                               4 (0.0%)
+   Jagan Teki                            4 (0.0%)
+   Leonard Anderweit                     4 (0.0%)
+   Kory Maincent                         4 (0.0%)
+   Yasuharu Shibata                      4 (0.0%)
+   Manikanta Guntupalli                  3 (0.0%)
+   Andrew Goodbody                       3 (0.0%)
+   Jonathan Liu                          3 (0.0%)
+   Bastian Germann                       3 (0.0%)
+   Marek Mojík                           2 (0.0%)
+   Brian Norris                          2 (0.0%)
+   Max Krummenacher                      2 (0.0%)
+   Dominik Haller                        2 (0.0%)
+   Javier Martinez Canillas              2 (0.0%)
+   Alexander Stein                       2 (0.0%)
+   Olaf Mandel                           2 (0.0%)
+   Thomas Perrot                         1 (0.0%)
+   Hugues Kamba Mpiana                   1 (0.0%)
+   Ravi Minnikanti                       1 (0.0%)
+   Seung-Woo Kim                         1 (0.0%)
+   Vishal Patel                          1 (0.0%)
+   Jan Kiszka                            1 (0.0%)
+   Andreas Schwab                        1 (0.0%)
+   Francois Berder                       1 (0.0%)
+   Jianan Huang                          1 (0.0%)
+   Baruch Siach                          1 (0.0%)
+   ====================================  =====
+
+
+.. table:: Developers with the most lines removed
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   Neha Malcom Francis                   6363 (6.3%)
+   Nishanth Menon                        5583 (5.5%)
+   Sumit Garg                            5246 (5.2%)
+   Manorit Chawdhry                      4743 (4.7%)
+   Quentin Schulz                        2898 (2.9%)
+   Aniket Limaye                         2869 (2.8%)
+   Yannic Moog                           2075 (2.1%)
+   Jonas Karlman                         1797 (1.8%)
+   Fabio Estevam                         1396 (1.4%)
+   Marek Vasut                           1227 (1.2%)
+   Patrick Barsanti                      790 (0.8%)
+   Geert Uytterhoeven                    713 (0.7%)
+   Sam Povilus                           654 (0.6%)
+   Jim Liu                               527 (0.5%)
+   Neil Armstrong                        429 (0.4%)
+   Tony Dinh                             267 (0.3%)
+   Rasmus Villemoes                      219 (0.2%)
+   Anatolij Gustschin                    161 (0.2%)
+   Adam Ford                             38 (0.0%)
+   Tim Harvey                            34 (0.0%)
+   Peter Robinson                        18 (0.0%)
+   Alexander Sverdlin                    16 (0.0%)
+   Charlie Johnston                      8 (0.0%)
+   Vignesh Raghavendra                   5 (0.0%)
+   Leo Yu-Chi Liang                      4 (0.0%)
+   Leo Yan                               4 (0.0%)
+   Neal Frager                           3 (0.0%)
+   Brandon Maier                         1 (0.0%)
+   Mikhail Kshevetskiy                   1 (0.0%)
+   Jerome Forissier                      1 (0.0%)
+   ====================================  =====
+
+
+.. table:: Developers with the most signoffs (total 172)
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   Heiko Stuebner                        28 (16.3%)
+   Michal Simek                          23 (13.4%)
+   Mattijs Korpershoek                   22 (12.8%)
+   Michael Trimarchi                     9 (5.2%)
+   Vaishnav Achath                       8 (4.7%)
+   Minkyu Kang                           7 (4.1%)
+   Jianfeng Liu                          7 (4.1%)
+   Caleb Connolly                        6 (3.5%)
+   Simon Glass                           6 (3.5%)
+   Manorit Chawdhry                      5 (2.9%)
+   Daniel Schultz                        5 (2.9%)
+   Jonas Karlman                         4 (2.3%)
+   Marek Mojík                           4 (2.3%)
+   Pali Rohár                            4 (2.3%)
+   Martyn Welch                          4 (2.3%)
+   Mikhail Kshevetskiy                   2 (1.2%)
+   Vibhore Vardhan                       2 (1.2%)
+   Udit Kumar                            2 (1.2%)
+   Wadim Egorov                          2 (1.2%)
+   Svyatoslav Ryhel                      2 (1.2%)
+   Yannic Moog                           1 (0.6%)
+   Marek Vasut                           1 (0.6%)
+   Neil Armstrong                        1 (0.6%)
+   Vignesh Raghavendra                   1 (0.6%)
+   Kever Yang                            1 (0.6%)
+   Peng Fan                              1 (0.6%)
+   Gabor Juhos                           1 (0.6%)
+   Shawn Guo                             1 (0.6%)
+   Apurva Nandan                         1 (0.6%)
+   Yashwanth Varakala                    1 (0.6%)
+   Bryan Brattlof                        1 (0.6%)
+   Benjamin Hahn                         1 (0.6%)
+   Ilias Apalodimas                      1 (0.6%)
+   Sam Day                               1 (0.6%)
+   Sebastian Reichel                     1 (0.6%)
+   Teresa Remmet                         1 (0.6%)
+   Christian Marangi                     1 (0.6%)
+   Heinrich Schuchardt                   1 (0.6%)
+   Andre Przywara                        1 (0.6%)
+   Tom Rini                              1 (0.6%)
+   ====================================  =====
+
+
+.. table:: Developers with the most reviews (total 612)
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   Kever Yang                            94 (15.4%)
+   Simon Glass                           78 (12.7%)
+   Mattijs Korpershoek                   51 (8.3%)
+   Ilias Apalodimas                      39 (6.4%)
+   Quentin Schulz                        29 (4.7%)
+   Tom Rini                              20 (3.3%)
+   Stefan Roese                          20 (3.3%)
+   Heinrich Schuchardt                   17 (2.8%)
+   Heiko Schocher                        15 (2.5%)
+   Marek Vasut                           14 (2.3%)
+   Daniel Schultz                        13 (2.1%)
+   Wadim Egorov                          13 (2.1%)
+   Patrice Chotard                       13 (2.1%)
+   Peng Fan                              11 (1.8%)
+   Andre Przywara                        10 (1.6%)
+   Leo Yu-Chi Liang                      10 (1.6%)
+   Neil Armstrong                        9 (1.5%)
+   Neha Malcom Francis                   9 (1.5%)
+   Dhruva Gole                           9 (1.5%)
+   Nishanth Menon                        8 (1.3%)
+   Caleb Connolly                        7 (1.1%)
+   Bryan Brattlof                        7 (1.1%)
+   Sumit Garg                            7 (1.1%)
+   Devarsh Thakkar                       6 (1.0%)
+   Julien Masson                         6 (1.0%)
+   Marek Behún                           6 (1.0%)
+   Guillaume La Roque                    5 (0.8%)
+   Sam Protsenko                         5 (0.8%)
+   Michal Simek                          4 (0.7%)
+   Tim Harvey                            4 (0.7%)
+   Igor Opaniuk                          4 (0.7%)
+   Andy Shevchenko                       4 (0.7%)
+   Bin Meng                              4 (0.7%)
+   Sean Anderson                         4 (0.7%)
+   Michael Trimarchi                     3 (0.5%)
+   Apurva Nandan                         3 (0.5%)
+   Fabio Estevam                         3 (0.5%)
+   Peter Robinson                        3 (0.5%)
+   Frieder Schrempf                      3 (0.5%)
+   Francesco Dolcini                     3 (0.5%)
+   Heiko Stuebner                        2 (0.3%)
+   Manorit Chawdhry                      2 (0.3%)
+   Jonas Karlman                         2 (0.3%)
+   Teresa Remmet                         2 (0.3%)
+   Alexander Sverdlin                    2 (0.3%)
+   Dmitrii Merkurev                      2 (0.3%)
+   Weizhao Ouyang                        2 (0.3%)
+   Andrew Davis                          2 (0.3%)
+   Ben Dooks                             1 (0.2%)
+   Mark Kettenis                         1 (0.2%)
+   Space Meyer                           1 (0.2%)
+   Chen-Yu Tsai                          1 (0.2%)
+   Ryan Walklin                          1 (0.2%)
+   Enric Balletbo i Serra                1 (0.2%)
+   Dong Aisheng                          1 (0.2%)
+   Hector Martin                         1 (0.2%)
+   Max Filippov                          1 (0.2%)
+   Douglas Anderson                      1 (0.2%)
+   Qu Wenruo                             1 (0.2%)
+   Patrick Delaunay                      1 (0.2%)
+   Tanmay Shah                           1 (0.2%)
+   Gao Xiang                             1 (0.2%)
+   Kamlesh Gurudasani                    1 (0.2%)
+   Quanyang Wang                         1 (0.2%)
+   João Marcos Costa                     1 (0.2%)
+   Lukasz Majewski                       1 (0.2%)
+   Dragan Simic                          1 (0.2%)
+   Raymond Mao                           1 (0.2%)
+   Philip Oberfichtner                   1 (0.2%)
+   Andrejs Cainikovs                     1 (0.2%)
+   Roger Quadros                         1 (0.2%)
+   ====================================  =====
+
+
+.. table:: Developers with the most test credits (total 108)
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   Mattijs Korpershoek                   22 (20.4%)
+   Michal Simek                          20 (18.5%)
+   Alexander Sverdlin                    11 (10.2%)
+   Max Filippov                          10 (9.3%)
+   Wadim Egorov                          6 (5.6%)
+   Heiko Stuebner                        5 (4.6%)
+   John Ma                               5 (4.6%)
+   Guillaume La Roque                    4 (3.7%)
+   FUKAUMI Naoki                         3 (2.8%)
+   Tom Rini                              2 (1.9%)
+   Ryan Walklin                          2 (1.9%)
+   Jethro Bull                           2 (1.9%)
+   Simon Glass                           1 (0.9%)
+   Ilias Apalodimas                      1 (0.9%)
+   Heinrich Schuchardt                   1 (0.9%)
+   Andre Przywara                        1 (0.9%)
+   Neil Armstrong                        1 (0.9%)
+   Sam Protsenko                         1 (0.9%)
+   Michael Trimarchi                     1 (0.9%)
+   E Shattow                             1 (0.9%)
+   Henrik Grimler                        1 (0.9%)
+   Stefano Babic                         1 (0.9%)
+   Maksim Kurnosenko                     1 (0.9%)
+   Robert Eckelmann                      1 (0.9%)
+   Antoni Aloy Torrens                   1 (0.9%)
+   Emil Kronborg                         1 (0.9%)
+   Alexander Dahl                        1 (0.9%)
+   Jonathan Humphreys                    1 (0.9%)
+   ====================================  =====
+
+
+.. table:: Developers who gave the most tested-by credits (total 109)
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   Marek Vasut                           26 (23.9%)
+   Sughosh Ganu                          20 (18.3%)
+   Jiaxun Yang                           10 (9.2%)
+   Daniel Schultz                        6 (5.5%)
+   Wadim Egorov                          5 (4.6%)
+   Sjoerd Simons                         5 (4.6%)
+   Mattijs Korpershoek                   4 (3.7%)
+   Quentin Schulz                        4 (3.7%)
+   Svyatoslav Ryhel                      3 (2.8%)
+   Ilias Apalodimas                      2 (1.8%)
+   Heinrich Schuchardt                   2 (1.8%)
+   Andre Przywara                        2 (1.8%)
+   Jonas Karlman                         2 (1.8%)
+   Jonas Schwöbel                        2 (1.8%)
+   Heiko Stuebner                        1 (0.9%)
+   Tom Rini                              1 (0.9%)
+   Simon Glass                           1 (0.9%)
+   Michael Trimarchi                     1 (0.9%)
+   Nishanth Menon                        1 (0.9%)
+   Caleb Connolly                        1 (0.9%)
+   Fabio Estevam                         1 (0.9%)
+   Mikhail Kshevetskiy                   1 (0.9%)
+   Patrick Barsanti                      1 (0.9%)
+   Rasmus Villemoes                      1 (0.9%)
+   Michael Walle                         1 (0.9%)
+   David Virag                           1 (0.9%)
+   Matthias Schiffer                     1 (0.9%)
+   Pratyush Yadav                        1 (0.9%)
+   Maxim Moskalets                       1 (0.9%)
+   Love Kumar                            1 (0.9%)
+   ====================================  =====
+
+
+.. table:: Developers with the most report credits (total 9)
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   E Shattow                             3 (33.3%)
+   Jonas Karlman                         1 (11.1%)
+   Jerome Forissier                      1 (11.1%)
+   Andreas Dannenberg                    1 (11.1%)
+   Robert Nelson                         1 (11.1%)
+   Dave Jones                            1 (11.1%)
+   jianqiang wang                        1 (11.1%)
+   ====================================  =====
+
+
+.. table:: Developers who gave the most report credits (total 9)
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   Heinrich Schuchardt                   3 (33.3%)
+   Tom Rini                              2 (22.2%)
+   Udit Kumar                            2 (22.2%)
+   Leo Yu-Chi Liang                      1 (11.1%)
+   Jianan Huang                          1 (11.1%)
+   ====================================  =====
+
+
+.. table:: Top changeset contributors by employer
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   (Unknown)                             432 (35.3%)
+   Renesas Electronics                   174 (14.2%)
+   Texas Instruments                     118 (9.6%)
+   Google LLC                            111 (9.1%)
+   Linaro                                101 (8.2%)
+   Konsulko Group                        56 (4.6%)
+   AMD                                   48 (3.9%)
+   Phytec                                48 (3.9%)
+   DENX Software Engineering             40 (3.3%)
+   ARM                                   19 (1.6%)
+   NXP                                   14 (1.1%)
+   Amarula Solutions                     12 (1.0%)
+   Toradex                               12 (1.0%)
+   BayLibre SAS                          11 (0.9%)
+   Collabora Ltd.                        11 (0.9%)
+   Weidmüller Interface GmbH & Co. KG    4 (0.3%)
+   Bootlin                               2 (0.2%)
+   Siemens                               2 (0.2%)
+   ST Microelectronics                   2 (0.2%)
+   Debian.org                            1 (0.1%)
+   Edgeble AI Technologies Pvt. Ltd.     1 (0.1%)
+   Red Hat                               1 (0.1%)
+   Intel                                 1 (0.1%)
+   Marvell                               1 (0.1%)
+   Rockchip                              1 (0.1%)
+   Samsung                               1 (0.1%)
+   SUSE                                  1 (0.1%)
+   ====================================  =====
+
+
+.. table:: Top lines changed by employer
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   Konsulko Group                        122630 (47.6%)
+   (Unknown)                             58443 (22.7%)
+   Texas Instruments                     37725 (14.7%)
+   Linaro                                16772 (6.5%)
+   Phytec                                3654 (1.4%)
+   DENX Software Engineering             3597 (1.4%)
+   Renesas Electronics                   3398 (1.3%)
+   AMD                                   2964 (1.2%)
+   Google LLC                            2775 (1.1%)
+   ARM                                   2233 (0.9%)
+   Amarula Solutions                     1155 (0.4%)
+   BayLibre SAS                          873 (0.3%)
+   Collabora Ltd.                        495 (0.2%)
+   NXP                                   253 (0.1%)
+   Toradex                               197 (0.1%)
+   ST Microelectronics                   79 (0.0%)
+   Weidmüller Interface GmbH & Co. KG    66 (0.0%)
+   Siemens                               17 (0.0%)
+   Intel                                 15 (0.0%)
+   Bootlin                               5 (0.0%)
+   Edgeble AI Technologies Pvt. Ltd.     4 (0.0%)
+   Debian.org                            3 (0.0%)
+   Red Hat                               2 (0.0%)
+   Marvell                               1 (0.0%)
+   Samsung                               1 (0.0%)
+   SUSE                                  1 (0.0%)
+   ====================================  =====
+
+
+.. table:: Employers with the most signoffs (total 172)
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   (Unknown)                             55 (32.0%)
+   AMD                                   23 (13.4%)
+   BayLibre SAS                          22 (12.8%)
+   Texas Instruments                     20 (11.6%)
+   Phytec                                11 (6.4%)
+   Amarula Solutions                     9 (5.2%)
+   Linaro                                8 (4.7%)
+   Samsung                               7 (4.1%)
+   Google LLC                            6 (3.5%)
+   Collabora Ltd.                        5 (2.9%)
+   Konsulko Group                        1 (0.6%)
+   DENX Software Engineering             1 (0.6%)
+   ARM                                   1 (0.6%)
+   NXP                                   1 (0.6%)
+   Rockchip                              1 (0.6%)
+   Canonical                             1 (0.6%)
+   ====================================  =====
+
+
+.. table:: Employers with the most hackers (total 155)
+   :widths: auto
+
+   ====================================  =====
+   Name                                  Count
+   ====================================  =====
+   (Unknown)                             72 (46.5%)
+   Texas Instruments                     17 (11.0%)
+   Linaro                                9 (5.8%)
+   AMD                                   8 (5.2%)
+   Phytec                                7 (4.5%)
+   ARM                                   7 (4.5%)
+   DENX Software Engineering             6 (3.9%)
+   Toradex                               4 (2.6%)
+   Collabora Ltd.                        3 (1.9%)
+   Amarula Solutions                     2 (1.3%)
+   ST Microelectronics                   2 (1.3%)
+   Siemens                               2 (1.3%)
+   Bootlin                               2 (1.3%)
+   BayLibre SAS                          1 (0.6%)
+   Samsung                               1 (0.6%)
+   Google LLC                            1 (0.6%)
+   Konsulko Group                        1 (0.6%)
+   NXP                                   1 (0.6%)
+   Rockchip                              1 (0.6%)
+   Renesas Electronics                   1 (0.6%)
+   Weidmüller Interface GmbH & Co. KG    1 (0.6%)
+   Intel                                 1 (0.6%)
+   Edgeble AI Technologies Pvt. Ltd.     1 (0.6%)
+   Debian.org                            1 (0.6%)
+   Red Hat                               1 (0.6%)
+   Marvell                               1 (0.6%)
+   SUSE                                  1 (0.6%)
+   ====================================  =====
diff --git a/doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml b/doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml
new file mode 100644
index 00000000000..df976c7ae73
--- /dev/null
+++ b/doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0+)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/adi/adi,sc5xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices SC5XX ARM-based SoCs
+
+maintainers:
+  - Vasileios Bimpikas <vasileios.bimpikas@analog.com>
+  - Utsav Agarwal <utsav.agarwal@analog.com>
+  - Arturs Artamonovs <arturs.artamonovs@analog.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: SC57X Series Boards
+        items:
+          - const: adi,sc573-ezkit
+          - const: adi,sc57x
+
+      - description: SC58X Series Boards
+        items:
+          - enum:
+            - adi,sc584-ezkit
+            - adi,sc589-ezkit
+            - adi,sc589-mini
+          - const: adi,sc58x
+
+      - description: SC59X Series 32-bit Boards
+        items:
+          - enum:
+            - adi,sc594-som-ezkit
+            - adi,sc594-som-ezlite
+          - const: adi,sc59x
+
+      - description: SC59X Series 64-bit Boards
+        items:
+          - enum:
+            - adi,sc598-som-ezkit
+            - adi,sc598-som-ezlite
+          - const: adi,sc59x-64
+
+additionalProperties: true
diff --git a/doc/device-tree-bindings/clock/adi,sc5xx-clocks.yaml b/doc/device-tree-bindings/clock/adi,sc5xx-clocks.yaml
new file mode 100644
index 00000000000..9bbd5467a01
--- /dev/null
+++ b/doc/device-tree-bindings/clock/adi,sc5xx-clocks.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0+)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/adi,sc5xx-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock Tree Drivers for Analog Devices SC5XX Processors
+
+maintainers:
+  - Vasileios Bimpikas <vasileios.bimpikas@analog.com>
+  - Utsav Agarwal <utsav.agarwal@analog.com>
+  - Arturs Artamonovs <arturs.artamonovs@analog.com>
+
+description: |
+  These drivers read in the processors CDU (clock distribution unit)
+  and CGU (clock generation unit) values to determine various clock
+  rates
+
+properties:
+  compatible:
+    enum:
+      - adi,sc5xx-clocks # Any
+      - adi,sc57x-clocks # 32-Bit SC573 processor
+      - adi,sc58x-clocks # 32-Bit SC584, SC589 processors
+      - adi,sc594-clocks # 32-Bit SC594 processor
+      - adi,sc598-clocks # 64-Bit SC598 processor
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    description:
+      String reference names for the reg property
+    minItems: 3
+    maxItems: 4
+
+  clocks:
+    description:
+      Specifies the CLKIN0 and CLKIN1 reference clock(s) from which the
+      output frequencies are derived via CDU+CGU
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    description:
+      String reference names for CLKIN0 and CLKIN1
+    minItems: 2
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk0: clocks@3108d000 {
+      compatible = "adi,sc57x-clocks";
+      reg = <0x3108d000 0x1000>,
+            <0x3108e000 0x1000>,
+            <0x3108f000 0x1000>;
+      #clock-cells = <1>;
+      clocks = <&sys_clkin0>, <&sys_clkin1>;
+      clock-names = "sys_clkin0", "sys_clkin1";
+      status = "okay";
+    };
+
+  - |
+    clk1: clocks@3108d000 {
+      compatible = "adi,sc58x-clocks";
+      reg = <0x3108d000 0x1000>,
+            <0x3108e000 0x1000>,
+            <0x3108f000 0x1000>;
+      #clock-cells = <1>;
+      clocks = <&sys_clkin0>, <&sys_clkin1>;
+      clock-names = "sys_clkin0", "sys_clkin1";
+      status = "okay";
+    };
+
+  - |
+    clk2: clocks@3108d000 {
+      compatible = "adi,sc594-clocks";
+      reg = <0x3108d000 0x1000>,
+            <0x3108e000 0x1000>,
+            <0x3108f000 0x1000>;
+      #clock-cells = <1>;
+      clocks = <&sys_clkin0>, <&sys_clkin1>;
+      clock-names = "sys_clkin0", "sys_clkin1";
+      status = "okay";
+    };
+
+  - |
+    clk3: clocks@3108d000 {
+      compatible = "adi,sc598-clocks";
+      reg = <0x3108d000 0x1000>,
+            <0x3108e000 0x1000>,
+            <0x3108f000 0x1000>,
+            <0x310a9000 0x1000>;
+      #clock-cells = <1>;
+      clocks = <&sys_clkin0>, <&sys_clkin1>;
+      clock-names = "sys_clkin0", "sys_clkin1";
+      status = "okay";
+    };
+
diff --git a/doc/device-tree-bindings/timer/adi,sc5xx-gptimer.yaml b/doc/device-tree-bindings/timer/adi,sc5xx-gptimer.yaml
new file mode 100644
index 00000000000..5e313af6fe0
--- /dev/null
+++ b/doc/device-tree-bindings/timer/adi,sc5xx-gptimer.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0+)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/adi,sc5xx-gptimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices SC5XX Series SoC Timer Peripherals
+
+maintainers:
+  - Vasileios Bimpikas <vasileios.bimpikas@analog.com>
+  - Utsav Agarwal <utsav.agarwal@analog.com>
+  - Arturs Artamonovs <arturs.artamonovs@analog.com>
+
+properties:
+  compatible:
+    const: adi,sc5xx-gptimer
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer0: timer@31018000 {
+      compatible = "adi,sc5xx-gptimer";
+      reg = <0x31018004 0x100>,
+            <0x31018060 0x100>;
+      status = "okay";
+      bootph-all;
+    };
+
diff --git a/doc/usage/cmd/ums.rst b/doc/usage/cmd/ums.rst
index 9d379e3c829..e96222785f2 100644
--- a/doc/usage/cmd/ums.rst
+++ b/doc/usage/cmd/ums.rst
@@ -48,7 +48,7 @@ Configuration
 -------------
 
 The ums command is only available if CONFIG_CMD_USB_MASS_STORAGE=y
-and depends on CONFIG_USB_USB_GADGET and CONFIG_BLK.
+which depends on CONFIG_USB_GADGET_DOWNLOAD and CONFIG_BLK.
 
 Return value
 ------------
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 48529a6982f..5283d8981e0 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -109,7 +109,7 @@ config EFI_MEDIA
 
 config SPL_BLK_FS
 	bool "Load images from filesystems on block devices"
-	depends on SPL_BLK
+	depends on SPL_BLK && SPL_FS_LOADER
 	help
 	  Use generic support to load images from fat/ext filesystems on
 	  different types of block devices such as NVMe.
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 0d2c0ac225c..d76fca5dba4 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -63,12 +63,21 @@ config CLK_QCOM_SM6115
 	  on the Snapdragon SM6115 SoC. This driver supports the clocks
 	  and resets exposed by the GCC hardware block.
 
+config CLK_QCOM_SM8150
+	bool "Qualcomm SM8150 GCC"
+	select CLK_QCOM
+	help
+	  Say Y here to enable support for the Global Clock Controller
+	  on the Snapdragon 8150 SoC. This driver supports the clocks
+	  and resets exposed by the GCC hardware block.
+
 config CLK_QCOM_SM8250
 	bool "Qualcomm SM8250 GCC"
 	select CLK_QCOM
 	help
 	  Say Y here to enable support for the Global Clock Controller
 	  on the Snapdragon SM8250 SoC. This driver supports the clocks
+	  and resets exposed by the GCC hardware block.
 
 config CLK_QCOM_SM8550
 	bool "Qualcomm SM8550 GCC"
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index e223c131ee4..ab33f1c5faf 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_CLK_QCOM_QCM2290) += clock-qcm2290.o
 obj-$(CONFIG_CLK_QCOM_QCS404) += clock-qcs404.o
 obj-$(CONFIG_CLK_QCOM_SC7280) += clock-sc7280.o
 obj-$(CONFIG_CLK_QCOM_SM6115) += clock-sm6115.o
+obj-$(CONFIG_CLK_QCOM_SM8150) += clock-sm8150.o
 obj-$(CONFIG_CLK_QCOM_SM8250) += clock-sm8250.o
 obj-$(CONFIG_CLK_QCOM_SM8550) += clock-sm8550.o
 obj-$(CONFIG_CLK_QCOM_SM8650) += clock-sm8650.o
diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c
index 79c7606a225..25ca67e537d 100644
--- a/drivers/clk/qcom/clock-qcom.c
+++ b/drivers/clk/qcom/clock-qcom.c
@@ -13,6 +13,7 @@
  */
 
 #include <clk-uclass.h>
+#include <linux/clk-provider.h>
 #include <dm.h>
 #include <dm/device-internal.h>
 #include <dm/lists.h>
@@ -215,9 +216,127 @@ static int msm_clk_enable(struct clk *clk)
 	return 0;
 }
 
+static void dump_gplls(struct udevice *dev, phys_addr_t base)
+{
+	struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(dev);
+	u32 i;
+	bool locked;
+	u64 l, a, xo_rate = 19200000;
+	struct clk *clk = NULL;
+	struct udevice *xodev;
+	const phys_addr_t *gplls = data->dbg_pll_addrs;
+
+	uclass_foreach_dev_probe(UCLASS_CLK, xodev) {
+		if (!strcmp(xodev->name, "xo-board") || !strcmp(xodev->name, "xo_board")) {
+			clk = dev_get_clk_ptr(xodev);
+			break;
+		}
+	}
+
+	if (clk) {
+		xo_rate = clk_get_rate(clk);
+
+		/* On SDM845 this needs to be divided by 2 for some reason */
+		if (xo_rate && of_machine_is_compatible("qcom,sdm845"))
+			xo_rate /= 2;
+	} else {
+		printf("Can't find XO clock, XO_BOARD rate may be wrong\n");
+	}
+
+	printf("GPLL clocks:\n");
+	printf("| GPLL   | LOCKED | XO_BOARD  |  PLL_L     | ALPHA          |\n");
+	printf("+--------+--------+-----------+------------+----------------+\n");
+	for (i = 0; i < data->num_plls; i++) {
+		locked = !!(readl(gplls[i]) & BIT(31));
+		l = readl(gplls[i] + 4) & (BIT(16) - 1);
+		a = readq(gplls[i] + 40) & (BIT(16) - 1);
+		printf("| GPLL%-2d | %-6s | %9llu * (%#-9llx + %#-13llx  * 2 ** -40 ) / 1000000\n",
+		       i, locked ? "X" : "", xo_rate, l, a);
+	}
+}
+
+static void dump_rcgs(struct udevice *dev)
+{
+	struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(dev);
+	int i;
+	u32 cmd;
+	u32 cfg;
+	u32 not_n_minus_m;
+	u32 src, m, n, div;
+	bool root_on, d_odd;
+
+	printf("\nRCGs:\n");
+
+	/*
+	 * Which GPLL SRC corresponds to depends on the parent map, see gcc-<soc>.c in Linux
+	 * and find the parent map associated with the clock. Note that often there are multiple
+	 * outputs from a single GPLL where one is actually half the rate of the other (_EVEN).
+	 * intput_freq = associated GPLL output freq (potentially divided depending on SRC).
+	 */
+	printf("| NAME                             | ON | SRC | OUT_FREQ = input_freq * (m/n) * (1/d) | [CMD REG   ] |\n");
+	printf("+----------------------------------+----+-----+---------------------------------------+--------------+\n");
+	for (i = 0; i < data->num_rcgs; i++) {
+		cmd = readl(data->dbg_rcg_addrs[i]);
+		cfg = readl(data->dbg_rcg_addrs[i] + 0x4);
+		m = readl(data->dbg_rcg_addrs[i] + 0x8);
+		n = 0;
+		not_n_minus_m = readl(data->dbg_rcg_addrs[i] + 0xc);
+
+		root_on = !(cmd & BIT(31)); // ROOT_OFF
+		src = (cfg >> 8) & 7;
+
+		if (not_n_minus_m) {
+			n = (~not_n_minus_m & 0xffff);
+
+			/* A clumsy assumption that this is an 8-bit MND RCG */
+			if ((n & 0xff00) == 0xff00)
+				n = n & 0xff;
+
+			n += m;
+		}
+
+		div = ((cfg & 0b11111) + 1) / 2;
+		d_odd = ((cfg & 0b11111) + 1) % 2 == 1;
+		printf("%-34s | %-2s | %3d | input_freq * (%4d/%5d) * (1/%1d%-2s)   | [%#010x]\n",
+		       data->dbg_rcg_names[i], root_on ? "X" : "", src,
+		       m ?: 1, n ?: 1, div, d_odd ? ".5" : "", cmd);
+	}
+
+	printf("\n");
+}
+
+static void __maybe_unused msm_dump_clks(struct udevice *dev)
+{
+	struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(dev);
+	struct msm_clk_priv *priv = dev_get_priv(dev);
+	const struct gate_clk *sclk;
+	int val, i;
+
+	if (!data->clks) {
+		printf("No clocks\n");
+		return;
+	}
+
+	printf("Gate Clocks:\n");
+	for (i = 0; i < data->num_clks; i++) {
+		sclk = &data->clks[i];
+		if (!sclk->name)
+			continue;
+		printf("%-32s: ", sclk->name);
+		val = readl(priv->base + sclk->reg) & sclk->en_val;
+		printf("%s\n", val ? "ON" : "");
+	}
+
+	dump_gplls(dev, priv->base);
+	dump_rcgs(dev);
+}
+
 static struct clk_ops msm_clk_ops = {
 	.set_rate = msm_clk_set_rate,
 	.enable = msm_clk_enable,
+#if IS_ENABLED(CONFIG_CMD_CLK)
+	.dump = msm_dump_clks,
+#endif
 };
 
 U_BOOT_DRIVER(qcom_clk) = {
diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
index 7aa6ca59aad..78d9b1d81ec 100644
--- a/drivers/clk/qcom/clock-qcom.h
+++ b/drivers/clk/qcom/clock-qcom.h
@@ -77,6 +77,12 @@ struct msm_clk_data {
 	const struct gate_clk		*clks;
 	unsigned long			num_clks;
 
+	const phys_addr_t		*dbg_pll_addrs;
+	unsigned long			num_plls;
+	const phys_addr_t		*dbg_rcg_addrs;
+	unsigned long			num_rcgs;
+	const char * const		*dbg_rcg_names;
+
 	int (*enable)(struct clk *clk);
 	unsigned long (*set_rate)(struct clk *clk, unsigned long rate);
 };
diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c
index f41f8c9e8de..adffb0cb240 100644
--- a/drivers/clk/qcom/clock-sdm845.c
+++ b/drivers/clk/qcom/clock-sdm845.c
@@ -203,6 +203,94 @@ static const struct qcom_power_map sdm845_gdscs[] = {
 	[HLOS1_VOTE_MMNOC_MMU_TBU_SF_GDSC] = { 0x7d044 },
 };
 
+static const phys_addr_t sdm845_gpll_addrs[] = {
+	0x00100000, // GCC_GPLL0_MODE
+	0x00101000, // GCC_GPLL1_MODE
+	0x00102000, // GCC_GPLL2_MODE
+	0x00103000, // GCC_GPLL3_MODE
+	0x00176000, // GCC_GPLL4_MODE
+	0x00174000, // GCC_GPLL5_MODE
+	0x00113000, // GCC_GPLL6_MODE
+};
+
+static const phys_addr_t sdm845_rcg_addrs[] = {
+	0x0010f018, // GCC_USB30_PRIM_MASTER
+	0x0010f030, // GCC_USB30_PRIM_MOCK_UTMI
+	0x0010f05c, // GCC_USB3_PRIM_PHY_AUX
+	0x00110018, // GCC_USB30_SEC_MASTER
+	0x00110030, // GCC_USB30_SEC_MOCK_UTMI
+	0x0011005c, // GCC_USB3_SEC_PHY_AUX
+	0x0011400c, // GCC_SDCC2_APPS
+	0x0011600c, // GCC_SDCC4_APPS
+	0x00117018, // GCC_QUPV3_WRAP0_CORE_2X
+	0x00117034, // GCC_QUPV3_WRAP0_S0
+	0x00117164, // GCC_QUPV3_WRAP0_S1
+	0x00117294, // GCC_QUPV3_WRAP0_S2
+	0x001173c4, // GCC_QUPV3_WRAP0_S3
+	0x001174f4, // GCC_QUPV3_WRAP0_S4
+	0x00117624, // GCC_QUPV3_WRAP0_S5
+	0x00117754, // GCC_QUPV3_WRAP0_S6
+	0x00117884, // GCC_QUPV3_WRAP0_S7
+	0x00118018, // GCC_QUPV3_WRAP1_S0
+	0x00118148, // GCC_QUPV3_WRAP1_S1
+	0x00118278, // GCC_QUPV3_WRAP1_S2
+	0x001183a8, // GCC_QUPV3_WRAP1_S3
+	0x001184d8, // GCC_QUPV3_WRAP1_S4
+	0x00118608, // GCC_QUPV3_WRAP1_S5
+	0x00118738, // GCC_QUPV3_WRAP1_S6
+	0x00118868, // GCC_QUPV3_WRAP1_S7
+	0x0016b028, // GCC_PCIE_0_AUX
+	0x0018d028, // GCC_PCIE_1_AUX
+	0x0016f014, // GCC_PCIE_PHY_REFGEN
+	0x0017501c, // GCC_UFS_CARD_AXI
+	0x0017505c, // GCC_UFS_CARD_ICE_CORE
+	0x00175074, // GCC_UFS_CARD_UNIPRO_CORE
+	0x00175090, // GCC_UFS_CARD_PHY_AUX
+	0x0017701c, // GCC_UFS_PHY_AXI
+	0x0017705c, // GCC_UFS_PHY_ICE_CORE
+	0x00177074, // GCC_UFS_PHY_UNIPRO_CORE
+	0x00177090, // GCC_UFS_PHY_PHY_AUX
+};
+
+static const char *const sdm845_rcg_names[] = {
+	"GCC_USB30_PRIM_MASTER",
+	"GCC_USB30_PRIM_MOCK_UTMI",
+	"GCC_USB3_PRIM_PHY_AUX",
+	"GCC_USB30_SEC_MASTER",
+	"GCC_USB30_SEC_MOCK_UTMI",
+	"GCC_USB3_SEC_PHY_AUX",
+	"GCC_SDCC2_APPS",
+	"GCC_SDCC4_APPS",
+	"GCC_QUPV3_WRAP0_CORE_2X",
+	"GCC_QUPV3_WRAP0_S0",
+	"GCC_QUPV3_WRAP0_S1",
+	"GCC_QUPV3_WRAP0_S2",
+	"GCC_QUPV3_WRAP0_S3",
+	"GCC_QUPV3_WRAP0_S4",
+	"GCC_QUPV3_WRAP0_S5",
+	"GCC_QUPV3_WRAP0_S6",
+	"GCC_QUPV3_WRAP0_S7",
+	"GCC_QUPV3_WRAP1_S0",
+	"GCC_QUPV3_WRAP1_S1",
+	"GCC_QUPV3_WRAP1_S2",
+	"GCC_QUPV3_WRAP1_S3",
+	"GCC_QUPV3_WRAP1_S4",
+	"GCC_QUPV3_WRAP1_S5",
+	"GCC_QUPV3_WRAP1_S6",
+	"GCC_QUPV3_WRAP1_S7",
+	"GCC_PCIE_0_AUX",
+	"GCC_PCIE_1_AUX",
+	"GCC_PCIE_PHY_REFGEN",
+	"GCC_UFS_CARD_AXI",
+	"GCC_UFS_CARD_ICE_CORE",
+	"GCC_UFS_CARD_UNIPRO_CORE",
+	"GCC_UFS_CARD_PHY_AUX",
+	"GCC_UFS_PHY_AXI",
+	"GCC_UFS_PHY_ICE_CORE",
+	"GCC_UFS_PHY_UNIPRO_CORE",
+	"GCC_UFS_PHY_PHY_AUX",
+};
+
 static struct msm_clk_data sdm845_clk_data = {
 	.resets = sdm845_gcc_resets,
 	.num_resets = ARRAY_SIZE(sdm845_gcc_resets),
@@ -213,6 +301,11 @@ static struct msm_clk_data sdm845_clk_data = {
 
 	.enable = sdm845_clk_enable,
 	.set_rate = sdm845_clk_set_rate,
+	.dbg_pll_addrs = sdm845_gpll_addrs,
+	.num_plls = ARRAY_SIZE(sdm845_gpll_addrs),
+	.dbg_rcg_addrs = sdm845_rcg_addrs,
+	.num_rcgs = ARRAY_SIZE(sdm845_rcg_addrs),
+	.dbg_rcg_names = sdm845_rcg_names,
 };
 
 static const struct udevice_id gcc_sdm845_of_match[] = {
diff --git a/drivers/clk/qcom/clock-sm6115.c b/drivers/clk/qcom/clock-sm6115.c
index 8314a0deb34..9057dfe0bb1 100644
--- a/drivers/clk/qcom/clock-sm6115.c
+++ b/drivers/clk/qcom/clock-sm6115.c
@@ -170,6 +170,63 @@ static const struct qcom_power_map sm6115_gdscs[] = {
 	[GCC_USB30_PRIM_GDSC] = { 0x1a004 },
 };
 
+static const phys_addr_t sm6115_gpll_addrs[] = {
+	0x01400000, // GCC_GPLL0_MODE
+	0x01401000, // GCC_GPLL1_MODE
+	0x01402000, // GCC_GPLL2_MODE
+	0x01403000, // GCC_GPLL3_MODE
+	0x01404000, // GCC_GPLL4_MODE
+	0x01405000, // GCC_GPLL5_MODE
+	0x01406000, // GCC_GPLL6_MODE
+	0x01407000, // GCC_GPLL7_MODE
+	0x01408000, // GCC_GPLL8_MODE
+	0x01409000, // GCC_GPLL9_MODE
+	0x0140a000, // GCC_GPLL10_MODE
+	0x0140b000, // GCC_GPLL11_MODE
+};
+
+static const phys_addr_t sm6115_rcg_addrs[] = {
+	0x0141a01c, // GCC_USB30_PRIM_MASTER_CMD_RCGR
+	0x0141a034, // GCC_USB30_PRIM_MOCK_UTMI_CMD_RCGR
+	0x0141a060, // GCC_USB3_PRIM_PHY_AUX_CMD_RCGR
+	0x01438028, // GCC_SDCC1_APPS_CMD_RCGR
+	0x0141e00c, // GCC_SDCC2_APPS_CMD_RCGR
+	0x0141f018, // GCC_QUPV3_WRAP0_CORE_2X_CMD_RCGR
+	0x0141f148, // GCC_QUPV3_WRAP0_S0_CMD_RCGR
+	0x0141f278, // GCC_QUPV3_WRAP0_S1_CMD_RCGR
+	0x0141f3a8, // GCC_QUPV3_WRAP0_S2_CMD_RCGR
+	0x0141f4d8, // GCC_QUPV3_WRAP0_S3_CMD_RCGR
+	0x0141f608, // GCC_QUPV3_WRAP0_S4_CMD_RCGR
+	0x0141f738, // GCC_QUPV3_WRAP0_S5_CMD_RCGR
+	0x01428014, // GCC_SLEEP_CMD_RCGR
+	0x0142802c, // GCC_XO_CMD_RCGR
+	0x01445020, // GCC_UFS_PHY_AXI_CMD_RCGR
+	0x01445048, // GCC_UFS_PHY_ICE_CORE_CMD_RCGR
+	0x01445060, // GCC_UFS_PHY_UNIPRO_CORE_CMD_RCGR
+	0x0144507c, // GCC_UFS_PHY_PHY_AUX_CMD_RCGR
+};
+
+static const char *const sm6115_rcg_names[] = {
+	"GCC_USB30_PRIM_MASTER_CMD_RCGR",
+	"GCC_USB30_PRIM_MOCK_UTMI_CMD_RCGR",
+	"GCC_USB3_PRIM_PHY_AUX_CMD_RCGR",
+	"GCC_SDCC1_APPS_CMD_RCGR",
+	"GCC_SDCC2_APPS_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_CORE_2X_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S0_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S1_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S2_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S3_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S4_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S5_CMD_RCGR",
+	"GCC_SLEEP_CMD_RCGR",
+	"GCC_XO_CMD_RCGR",
+	"GCC_UFS_PHY_AXI_CMD_RCGR",
+	"GCC_UFS_PHY_ICE_CORE_CMD_RCGR",
+	"GCC_UFS_PHY_UNIPRO_CORE_CMD_RCGR",
+	"GCC_UFS_PHY_PHY_AUX_CMD_RCGR",
+};
+
 static struct msm_clk_data sm6115_gcc_data = {
 	.resets = sm6115_gcc_resets,
 	.num_resets = ARRAY_SIZE(sm6115_gcc_resets),
@@ -180,6 +237,12 @@ static struct msm_clk_data sm6115_gcc_data = {
 
 	.enable = sm6115_enable,
 	.set_rate = sm6115_set_rate,
+
+	.dbg_pll_addrs = sm6115_gpll_addrs,
+	.num_plls = ARRAY_SIZE(sm6115_gpll_addrs),
+	.dbg_rcg_addrs = sm6115_rcg_addrs,
+	.num_rcgs = ARRAY_SIZE(sm6115_rcg_addrs),
+	.dbg_rcg_names = sm6115_rcg_names,
 };
 
 static const struct udevice_id gcc_sm6115_of_match[] = {
diff --git a/drivers/clk/qcom/clock-sm8150.c b/drivers/clk/qcom/clock-sm8150.c
new file mode 100644
index 00000000000..88f2e678f43
--- /dev/null
+++ b/drivers/clk/qcom/clock-sm8150.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Clock drivers for Qualcomm SM8150
+ *
+ * Volodymyr Babchuk <volodymyr_babchuk@epam.com>
+ * Copyright (c) 2024 EPAM Systems.
+ *
+ * (C) Copyright 2024 Julius Lehmann <lehmanju@devpi.de>
+ *
+ * Based on U-Boot driver for SM8250. Constants are taken from the Linux driver.
+ */
+
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <dt-bindings/clock/qcom,gcc-sm8150.h>
+
+#include "clock-qcom.h"
+
+#define EMAC_RGMII_CLK_CMD_RCGR 0x601c
+#define QUPV3_WRAP0_S0_CLK_CMD_RCGR 0x18148
+#define USB30_PRIM_MASTER_CLK_CMD_RCGR 0xf01c
+#define USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR 0xf034
+#define USB30_PRIM_PHY_AUX_CLK_CMD_RCGR 0xf060
+#define USB30_SEC_MASTER_CLK_CMD_RCGR 0x1001c
+#define USB30_SEC_MOCK_UTMI_CLK_CMD_RCGR 0x10034
+#define USB30_SEC_PHY_AUX_CLK_CMD_RCGR 0x10060
+#define SDCC2_APPS_CLK_CMD_RCGR 0x1400c
+
+static struct pll_vote_clk gpll7_vote_clk = {
+	.status = 0x1a000,
+	.status_bit = BIT(31),
+	.ena_vote = 0x52000,
+	.vote_bit = BIT(7),
+};
+
+static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
+	F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625),
+	F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625),
+	F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
+	F(29491200, CFG_CLK_SRC_GPLL0_EVEN, 1, 1536, 15625),
+	F(32000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 8, 75),
+	F(48000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 4, 25),
+	F(64000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 16, 75),
+	F(80000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 4, 15),
+	F(96000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 8, 25),
+	F(100000000, CFG_CLK_SRC_GPLL0_EVEN, 3, 0, 0),
+	F(102400000, CFG_CLK_SRC_GPLL0_EVEN, 1, 128, 375),
+	F(112000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 28, 75),
+	F(117964800, CFG_CLK_SRC_GPLL0_EVEN, 1, 6144, 15625),
+	F(120000000, CFG_CLK_SRC_GPLL0_EVEN, 2.5, 0, 0),
+	F(128000000, CFG_CLK_SRC_GPLL0, 1, 16, 75),
+	{ }
+};
+
+static const struct freq_tbl ftbl_gcc_emac_rgmii_clk_src[] = {
+	F(2500000, CFG_CLK_SRC_CXO, 1, 25, 192),
+	F(5000000, CFG_CLK_SRC_CXO, 1, 25, 96),
+	F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
+	F(25000000, CFG_CLK_SRC_GPLL0_EVEN, 12, 0, 0),
+	F(50000000, CFG_CLK_SRC_GPLL0_EVEN, 6, 0, 0),
+	F(125000000, CFG_CLK_SRC_GPLL7, 4, 0, 0),
+	F(250000000, CFG_CLK_SRC_GPLL7, 2, 0, 0),
+	{ }
+};
+
+static const struct freq_tbl ftbl_gcc_usb30_prim_master_clk_src[] = {
+	F(33333333, CFG_CLK_SRC_GPLL0_EVEN, 9, 0, 0),
+	F(66666667, CFG_CLK_SRC_GPLL0_EVEN, 4.5, 0, 0),
+	F(133333333, CFG_CLK_SRC_GPLL0, 4.5, 0, 0),
+	F(200000000, CFG_CLK_SRC_GPLL0, 3, 0, 0),
+	F(240000000, CFG_CLK_SRC_GPLL0, 2.5, 0, 0),
+	{ }
+};
+
+static const struct freq_tbl ftbl_gcc_usb30_prim_mock_utmi_clk_src[] = {
+	F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
+	F(20000000, CFG_CLK_SRC_GPLL0_EVEN, 15, 0, 0),
+	F(60000000, CFG_CLK_SRC_GPLL0_EVEN, 5, 0, 0),
+	{ }
+};
+
+static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = {
+	F(400000, CFG_CLK_SRC_CXO, 12, 1, 4),
+	F(9600000, CFG_CLK_SRC_CXO, 2, 0, 0),
+	F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
+	F(25000000, CFG_CLK_SRC_GPLL0, 12, 1, 2),
+	F(50000000, CFG_CLK_SRC_GPLL0, 12, 0, 0),
+	F(100000000, CFG_CLK_SRC_GPLL0, 6, 0, 0),
+	F(202000000, CFG_CLK_SRC_GPLL0, 4, 0, 0),
+	{ }
+};
+
+static ulong sm8150_clk_set_rate(struct clk *clk, ulong rate)
+{
+	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+	const struct freq_tbl *freq;
+
+	switch (clk->id) {
+	case GCC_QUPV3_WRAP1_S4_CLK: /* UART2 aka debug-uart */
+		freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate);
+		clk_rcg_set_rate_mnd(priv->base, QUPV3_WRAP0_S0_CLK_CMD_RCGR,
+				     freq->pre_div, freq->m, freq->n, freq->src, 16);
+		return freq->freq;
+	case GCC_EMAC_RGMII_CLK:
+		freq = qcom_find_freq(ftbl_gcc_emac_rgmii_clk_src, rate);
+		clk_rcg_set_rate_mnd(priv->base, EMAC_RGMII_CLK_CMD_RCGR,
+				     freq->pre_div, freq->m, freq->n, freq->src, 8);
+		return freq->freq;
+	case GCC_USB30_PRIM_MASTER_CLK:
+		freq = qcom_find_freq(ftbl_gcc_usb30_prim_master_clk_src, rate);
+		clk_rcg_set_rate_mnd(priv->base, USB30_PRIM_MASTER_CLK_CMD_RCGR,
+				     freq->pre_div, freq->m, freq->n, freq->src, 8);
+		return freq->freq;
+	case GCC_USB30_PRIM_MOCK_UTMI_CLK:
+		freq = qcom_find_freq(ftbl_gcc_usb30_prim_mock_utmi_clk_src, rate);
+		clk_rcg_set_rate_mnd(priv->base, USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR,
+				     freq->pre_div, freq->m, freq->n, freq->src, 0);
+		return freq->freq;
+	case GCC_USB3_PRIM_PHY_AUX_CLK_SRC:
+		freq = qcom_find_freq(ftbl_gcc_usb30_prim_mock_utmi_clk_src, rate);
+		clk_rcg_set_rate_mnd(priv->base, USB30_PRIM_PHY_AUX_CLK_CMD_RCGR,
+				     freq->pre_div, freq->m, freq->n, freq->src, 0);
+		return freq->freq;
+	case GCC_USB30_SEC_MASTER_CLK:
+		freq = qcom_find_freq(ftbl_gcc_usb30_prim_master_clk_src, rate);
+		clk_rcg_set_rate_mnd(priv->base, USB30_SEC_MASTER_CLK_CMD_RCGR,
+				     freq->pre_div, freq->m, freq->n, freq->src, 8);
+		return freq->freq;
+	case GCC_USB30_SEC_MOCK_UTMI_CLK:
+		freq = qcom_find_freq(ftbl_gcc_usb30_prim_mock_utmi_clk_src, rate);
+		clk_rcg_set_rate_mnd(priv->base, USB30_SEC_MOCK_UTMI_CLK_CMD_RCGR,
+				     freq->pre_div, freq->m, freq->n, freq->src, 0);
+		return freq->freq;
+	case GCC_USB3_SEC_PHY_AUX_CLK_SRC:
+		freq = qcom_find_freq(ftbl_gcc_usb30_prim_mock_utmi_clk_src, rate);
+		clk_rcg_set_rate_mnd(priv->base, USB30_SEC_PHY_AUX_CLK_CMD_RCGR,
+				     freq->pre_div, freq->m, freq->n, freq->src, 0);
+		return freq->freq;
+	case GCC_SDCC2_APPS_CLK:
+		freq = qcom_find_freq(ftbl_gcc_sdcc2_apps_clk_src, rate);
+		clk_rcg_set_rate_mnd(priv->base, SDCC2_APPS_CLK_CMD_RCGR,
+				     freq->pre_div, freq->m, freq->n, freq->src, 8);
+		return freq->freq;
+	default:
+		return 0;
+	}
+}
+
+static const struct gate_clk sm8150_clks[] = {
+	GATE_CLK(GCC_AGGRE_UFS_CARD_AXI_CLK,		0x750c0, 0x00000001),
+	GATE_CLK(GCC_AGGRE_UFS_PHY_AXI_CLK,			0x770c0, 0x00000001),
+	GATE_CLK(GCC_AGGRE_USB3_PRIM_AXI_CLK,		0xf07c, 0x00000001),
+	GATE_CLK(GCC_AGGRE_USB3_SEC_AXI_CLK,		0x1007c, 0x00000001),
+	GATE_CLK(GCC_CFG_NOC_USB3_PRIM_AXI_CLK,		0xf078, 0x00000001),
+	GATE_CLK(GCC_CFG_NOC_USB3_SEC_AXI_CLK,		0x10078, 0x00000001),
+	GATE_CLK(GCC_QUPV3_WRAP0_S0_CLK,		0x5200c, 0x00000400),
+	GATE_CLK(GCC_QUPV3_WRAP0_S1_CLK,		0x5200c, 0x00000800),
+	GATE_CLK(GCC_QUPV3_WRAP0_S2_CLK,		0x5200c, 0x00001000),
+	GATE_CLK(GCC_QUPV3_WRAP0_S3_CLK,		0x5200c, 0x00002000),
+	GATE_CLK(GCC_QUPV3_WRAP0_S4_CLK,		0x5200c, 0x00004000),
+	GATE_CLK(GCC_QUPV3_WRAP0_S5_CLK,		0x5200c, 0x00008000),
+	GATE_CLK(GCC_QUPV3_WRAP1_S0_CLK,		0x5200c, 0x00400000),
+	GATE_CLK(GCC_QUPV3_WRAP1_S1_CLK,		0x5200c, 0x00800000),
+	GATE_CLK(GCC_QUPV3_WRAP1_S3_CLK,		0x5200c, 0x02000000),
+	GATE_CLK(GCC_QUPV3_WRAP1_S4_CLK,		0x5200c, 0x04000000),
+	GATE_CLK(GCC_QUPV3_WRAP1_S5_CLK,		0x5200c, 0x08000000),
+	GATE_CLK(GCC_QUPV3_WRAP_0_M_AHB_CLK,		0x5200c, 0x00000040),
+	GATE_CLK(GCC_QUPV3_WRAP_0_S_AHB_CLK,		0x5200c, 0x00000080),
+	GATE_CLK(GCC_QUPV3_WRAP_1_M_AHB_CLK,		0x5200c, 0x00100000),
+	GATE_CLK(GCC_QUPV3_WRAP_1_S_AHB_CLK,		0x5200c, 0x00200000),
+	GATE_CLK(GCC_SDCC2_AHB_CLK,			0x14008, 0x00000001),
+	GATE_CLK(GCC_SDCC2_APPS_CLK,			0x14004, 0x00000001),
+	GATE_CLK(GCC_SDCC4_AHB_CLK,			0x16008, 0x00000001),
+	GATE_CLK(GCC_SDCC4_APPS_CLK,			0x16004, 0x00000001),
+	GATE_CLK(GCC_UFS_CARD_AHB_CLK,			0x75014, 0x00000001),
+	GATE_CLK(GCC_UFS_CARD_AXI_CLK,			0x75010, 0x00000001),
+	GATE_CLK(GCC_UFS_CARD_CLKREF_CLK,		0x8c004, 0x00000001),
+	GATE_CLK(GCC_UFS_CARD_ICE_CORE_CLK,		0x7505c, 0x00000001),
+	GATE_CLK(GCC_UFS_CARD_PHY_AUX_CLK,		0x75090, 0x00000001),
+	GATE_CLK(GCC_UFS_CARD_RX_SYMBOL_0_CLK,		0x7501c, 0x00000001),
+	GATE_CLK(GCC_UFS_CARD_RX_SYMBOL_1_CLK,		0x750ac, 0x00000001),
+	GATE_CLK(GCC_UFS_CARD_TX_SYMBOL_0_CLK,		0x75018, 0x00000001),
+	GATE_CLK(GCC_UFS_CARD_UNIPRO_CORE_CLK,		0x75058, 0x00000001),
+	GATE_CLK(GCC_UFS_MEM_CLKREF_CLK,		0x8c000, 0x00000001),
+	GATE_CLK(GCC_UFS_PHY_AHB_CLK,			0x77014, 0x00000001),
+	GATE_CLK(GCC_UFS_PHY_AXI_CLK,			0x77010, 0x00000001),
+	GATE_CLK(GCC_UFS_PHY_ICE_CORE_CLK,		0x7705c, 0x00000001),
+	GATE_CLK(GCC_UFS_PHY_PHY_AUX_CLK,		0x77090, 0x00000001),
+	GATE_CLK(GCC_UFS_PHY_RX_SYMBOL_0_CLK,		0x7701c, 0x00000001),
+	GATE_CLK(GCC_UFS_PHY_RX_SYMBOL_1_CLK,		0x770ac, 0x00000001),
+	GATE_CLK(GCC_UFS_PHY_TX_SYMBOL_0_CLK,		0x77018, 0x00000001),
+	GATE_CLK(GCC_UFS_PHY_UNIPRO_CORE_CLK,		0x77058, 0x00000001),
+	GATE_CLK(GCC_USB30_PRIM_MASTER_CLK,		0x0f00c, 0x00000001),
+	GATE_CLK(GCC_USB30_PRIM_MOCK_UTMI_CLK,		0x0f014, 0x00000001),
+	GATE_CLK(GCC_USB30_PRIM_SLEEP_CLK,		0x0f010, 0x00000001),
+	GATE_CLK(GCC_USB30_SEC_MASTER_CLK,		0x1000c, 0x00000001),
+	GATE_CLK(GCC_USB30_SEC_MOCK_UTMI_CLK,		0x10014, 0x00000001),
+	GATE_CLK(GCC_USB30_SEC_SLEEP_CLK,		0x10010, 0x00000001),
+	GATE_CLK(GCC_USB3_PRIM_CLKREF_CLK,		0x8c008, 0x00000001),
+	GATE_CLK(GCC_USB3_PRIM_PHY_AUX_CLK,		0x0f04c, 0x00000001),
+	GATE_CLK(GCC_USB3_PRIM_PHY_COM_AUX_CLK,		0x0f050, 0x00000001),
+	GATE_CLK(GCC_USB3_PRIM_PHY_PIPE_CLK,		0x0f054, 0x00000001),
+	GATE_CLK(GCC_USB3_SEC_CLKREF_CLK,		0x8c028, 0x00000001),
+	GATE_CLK(GCC_USB3_SEC_PHY_AUX_CLK,		0x1004c, 0x00000001),
+	GATE_CLK(GCC_USB3_SEC_PHY_PIPE_CLK,		0x10054, 0x00000001),
+	GATE_CLK(GCC_USB3_SEC_PHY_COM_AUX_CLK,		0x10050, 0x00000001),
+	GATE_CLK(GCC_EMAC_AXI_CLK,			0x06010, 0x00000001),
+	GATE_CLK(GCC_EMAC_SLV_AHB_CLK,			0x06014, 0x00000001),
+	GATE_CLK(GCC_EMAC_PTP_CLK,			0x06034, 0x00000001),
+	GATE_CLK(GCC_EMAC_RGMII_CLK,			0x06018, 0x00000001),
+};
+
+static int sm8150_clk_enable(struct clk *clk)
+{
+	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+	if (priv->data->num_clks <= clk->id) {
+		debug("%s: unknown clk id %lu\n", __func__, clk->id);
+		return 0;
+	}
+
+	debug("%s: clk %s\n", __func__, sm8150_clks[clk->id].name);
+
+	switch (clk->id) {
+	case GCC_EMAC_RGMII_CLK:
+		clk_enable_gpll0(priv->base, &gpll7_vote_clk);
+	case GCC_AGGRE_USB3_PRIM_AXI_CLK:
+		qcom_gate_clk_en(priv, GCC_USB30_PRIM_MASTER_CLK);
+		fallthrough;
+	case GCC_USB30_PRIM_MASTER_CLK:
+		qcom_gate_clk_en(priv, GCC_USB3_PRIM_PHY_AUX_CLK);
+		qcom_gate_clk_en(priv, GCC_USB3_PRIM_PHY_COM_AUX_CLK);
+		break;
+	case GCC_AGGRE_USB3_SEC_AXI_CLK:
+		qcom_gate_clk_en(priv, GCC_USB30_SEC_MASTER_CLK);
+		fallthrough;
+	case GCC_USB30_SEC_MASTER_CLK:
+		qcom_gate_clk_en(priv, GCC_USB3_SEC_PHY_AUX_CLK);
+		qcom_gate_clk_en(priv, GCC_USB3_SEC_PHY_COM_AUX_CLK);
+		break;
+	};
+
+	qcom_gate_clk_en(priv, clk->id);
+
+	return 0;
+}
+
+static const struct qcom_reset_map sm8150_gcc_resets[] = {
+	[GCC_EMAC_BCR] = { 0x6000 },
+	[GCC_GPU_BCR] = { 0x71000 },
+	[GCC_MMSS_BCR] = { 0xb000 },
+	[GCC_NPU_BCR] = { 0x4d000 },
+	[GCC_PCIE_0_BCR] = { 0x6b000 },
+	[GCC_PCIE_0_PHY_BCR] = { 0x6c01c },
+	[GCC_PCIE_1_BCR] = { 0x8d000 },
+	[GCC_PCIE_1_PHY_BCR] = { 0x8e01c },
+	[GCC_PCIE_PHY_BCR] = { 0x6f000 },
+	[GCC_PDM_BCR] = { 0x33000 },
+	[GCC_PRNG_BCR] = { 0x34000 },
+	[GCC_QSPI_BCR] = { 0x24008 },
+	[GCC_QUPV3_WRAPPER_0_BCR] = { 0x17000 },
+	[GCC_QUPV3_WRAPPER_1_BCR] = { 0x18000 },
+	[GCC_QUPV3_WRAPPER_2_BCR] = { 0x1e000 },
+	[GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 },
+	[GCC_QUSB2PHY_SEC_BCR] = { 0x12004 },
+	[GCC_USB3_PHY_PRIM_BCR] = { 0x50000 },
+	[GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 },
+	[GCC_USB3_PHY_SEC_BCR] = { 0x5000c },
+	[GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 },
+	[GCC_SDCC2_BCR] = { 0x14000 },
+	[GCC_SDCC4_BCR] = { 0x16000 },
+	[GCC_TSIF_BCR] = { 0x36000 },
+	[GCC_UFS_CARD_BCR] = { 0x75000 },
+	[GCC_UFS_PHY_BCR] = { 0x77000 },
+	[GCC_USB30_PRIM_BCR] = { 0xf000 },
+	[GCC_USB30_SEC_BCR] = { 0x10000 },
+	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
+};
+
+static const struct qcom_power_map sm8150_gcc_power_domains[] = {
+	[EMAC_GDSC] = { 0x6004 },
+	[PCIE_0_GDSC] = { 0x6b004 },
+	[PCIE_1_GDSC] = { 0x8d004 },
+	[UFS_CARD_GDSC] = { 0x75004 },
+	[UFS_PHY_GDSC] = { 0x77004 },
+	[USB30_PRIM_GDSC] = { 0xf004 },
+	[USB30_SEC_GDSC] = { 0x10004 },
+};
+
+static struct msm_clk_data sm8150_clk_data = {
+	.resets = sm8150_gcc_resets,
+	.num_resets = ARRAY_SIZE(sm8150_gcc_resets),
+	.clks = sm8150_clks,
+	.num_clks = ARRAY_SIZE(sm8150_clks),
+	.power_domains = sm8150_gcc_power_domains,
+	.num_power_domains = ARRAY_SIZE(sm8150_gcc_power_domains),
+
+	.enable = sm8150_clk_enable,
+	.set_rate = sm8150_clk_set_rate,
+};
+
+static const struct udevice_id gcc_sm8150_of_match[] = {
+	{
+		.compatible = "qcom,gcc-sm8150",
+		.data = (ulong)&sm8150_clk_data,
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_sm8150) = {
+	.name		= "gcc_sm8150",
+	.id             = UCLASS_NOP,
+	.of_match	= gcc_sm8150_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/qcom/clock-sm8250.c b/drivers/clk/qcom/clock-sm8250.c
index af10fc11621..e322a923a5c 100644
--- a/drivers/clk/qcom/clock-sm8250.c
+++ b/drivers/clk/qcom/clock-sm8250.c
@@ -253,6 +253,115 @@ static const struct qcom_power_map sm8250_gdscs[] = {
 	[USB30_SEC_GDSC] = { 0x10004 },
 };
 
+static const phys_addr_t sm8250_gpll_addrs[] = {
+	0x00100000, // GCC_GPLL0_MODE
+	0x00101000, // GCC_GPLL1_MODE
+	0x00102000, // GCC_GPLL2_MODE
+	0x00103000, // GCC_GPLL3_MODE
+	0x00176000, // GCC_GPLL4_MODE
+	0x00174000, // GCC_GPLL5_MODE
+	0x00113000, // GCC_GPLL6_MODE
+	0x0011a000, // GCC_GPLL7_MODE
+	0x0011b000, // GCC_GPLL8_MODE
+	0x0011c000, // GCC_GPLL9_MODE
+	0x0011d000, // GCC_GPLL10_MODE
+	0x0014a000, // GCC_GPLL11_MODE
+};
+
+static const phys_addr_t sm8250_rcg_addrs[] = {
+	0x0010f020, // GCC_USB30_PRIM_MASTER_CMD_RCGR
+	0x0010f038, // GCC_USB30_PRIM_MOCK_UTMI_CMD_RCGR
+	0x0010f064, // GCC_USB3_PRIM_PHY_AUX_CMD_RCGR
+	0x00110020, // GCC_USB30_SEC_MASTER_CMD_RCGR
+	0x00110038, // GCC_USB30_SEC_MOCK_UTMI_CMD_RCGR
+	0x00110064, // GCC_USB3_SEC_PHY_AUX_CMD_RCGR
+	0x0011400c, // GCC_SDCC2_APPS_CMD_RCGR
+	0x0011600c, // GCC_SDCC4_APPS_CMD_RCGR
+	0x0012300c, // GCC_QUPV3_WRAP0_CORE_2X_CMD_RCGR
+	0x00117010, // GCC_QUPV3_WRAP0_S0_CMD_RCGR
+	0x00117140, // GCC_QUPV3_WRAP0_S1_CMD_RCGR
+	0x00117270, // GCC_QUPV3_WRAP0_S2_CMD_RCGR
+	0x001173a0, // GCC_QUPV3_WRAP0_S3_CMD_RCGR
+	0x001174d0, // GCC_QUPV3_WRAP0_S4_CMD_RCGR
+	0x00117600, // GCC_QUPV3_WRAP0_S5_CMD_RCGR
+	0x00117730, // GCC_QUPV3_WRAP0_S6_CMD_RCGR
+	0x00117860, // GCC_QUPV3_WRAP0_S7_CMD_RCGR
+	0x00123144, // GCC_QUPV3_WRAP1_CORE_2X_CMD_RCGR
+	0x00118010, // GCC_QUPV3_WRAP1_S0_CMD_RCGR
+	0x00118140, // GCC_QUPV3_WRAP1_S1_CMD_RCGR
+	0x00118270, // GCC_QUPV3_WRAP1_S2_CMD_RCGR
+	0x001183a0, // GCC_QUPV3_WRAP1_S3_CMD_RCGR
+	0x001184d0, // GCC_QUPV3_WRAP1_S4_CMD_RCGR
+	0x00118600, // GCC_QUPV3_WRAP1_S5_CMD_RCGR
+	0x0016b038, // GCC_PCIE_0_AUX_CMD_RCGR
+	0x0018d038, // GCC_PCIE_1_AUX_CMD_RCGR
+	0x0016f014, // GCC_PCIE_PHY_REFGEN_CMD_RCGR
+	0x00175024, // GCC_UFS_CARD_AXI_CMD_RCGR
+	0x0017506c, // GCC_UFS_CARD_ICE_CORE_CMD_RCGR
+	0x00175084, // GCC_UFS_CARD_UNIPRO_CORE_CMD_RCGR
+	0x001750a0, // GCC_UFS_CARD_PHY_AUX_CMD_RCGR
+	0x00177024, // GCC_UFS_PHY_AXI_CMD_RCGR
+	0x0017706c, // GCC_UFS_PHY_ICE_CORE_CMD_RCGR
+	0x00177084, // GCC_UFS_PHY_UNIPRO_CORE_CMD_RCGR
+	0x001770a0, // GCC_UFS_PHY_PHY_AUX_CMD_RCGR
+	0x0012327c, // GCC_QUPV3_WRAP2_CORE_2X_CMD_RCGR
+	0x0011e010, // GCC_QUPV3_WRAP2_S0_CMD_RCGR
+	0x0011e140, // GCC_QUPV3_WRAP2_S1_CMD_RCGR
+	0x0011e270, // GCC_QUPV3_WRAP2_S2_CMD_RCGR
+	0x0011e3a0, // GCC_QUPV3_WRAP2_S3_CMD_RCGR
+	0x0011e4d0, // GCC_QUPV3_WRAP2_S4_CMD_RCGR
+	0x0011e600, // GCC_QUPV3_WRAP2_S5_CMD_RCGR
+	0x0010d00c, // GCC_RBCPR_MMCX_CMD_RCGR
+	0x00106038, // GCC_PCIE_2_AUX_CMD_RCGR
+};
+
+static const char *const sm8250_rcg_names[] = {
+	"GCC_USB30_PRIM_MASTER_CMD_RCGR",
+	"GCC_USB30_PRIM_MOCK_UTMI_CMD_RCGR",
+	"GCC_USB3_PRIM_PHY_AUX_CMD_RCGR",
+	"GCC_USB30_SEC_MASTER_CMD_RCGR",
+	"GCC_USB30_SEC_MOCK_UTMI_CMD_RCGR",
+	"GCC_USB3_SEC_PHY_AUX_CMD_RCGR",
+	"GCC_SDCC2_APPS_CMD_RCGR",
+	"GCC_SDCC4_APPS_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_CORE_2X_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S0_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S1_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S2_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S3_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S4_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S5_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S6_CMD_RCGR",
+	"GCC_QUPV3_WRAP0_S7_CMD_RCGR",
+	"GCC_QUPV3_WRAP1_CORE_2X_CMD_RCGR",
+	"GCC_QUPV3_WRAP1_S0_CMD_RCGR",
+	"GCC_QUPV3_WRAP1_S1_CMD_RCGR",
+	"GCC_QUPV3_WRAP1_S2_CMD_RCGR",
+	"GCC_QUPV3_WRAP1_S3_CMD_RCGR",
+	"GCC_QUPV3_WRAP1_S4_CMD_RCGR",
+	"GCC_QUPV3_WRAP1_S5_CMD_RCGR",
+	"GCC_PCIE_0_AUX_CMD_RCGR",
+	"GCC_PCIE_1_AUX_CMD_RCGR",
+	"GCC_PCIE_PHY_REFGEN_CMD_RCGR",
+	"GCC_UFS_CARD_AXI_CMD_RCGR",
+	"GCC_UFS_CARD_ICE_CORE_CMD_RCGR",
+	"GCC_UFS_CARD_UNIPRO_CORE_CMD_RCGR",
+	"GCC_UFS_CARD_PHY_AUX_CMD_RCGR",
+	"GCC_UFS_PHY_AXI_CMD_RCGR",
+	"GCC_UFS_PHY_ICE_CORE_CMD_RCGR",
+	"GCC_UFS_PHY_UNIPRO_CORE_CMD_RCGR",
+	"GCC_UFS_PHY_PHY_AUX_CMD_RCGR",
+	"GCC_QUPV3_WRAP2_CORE_2X_CMD_RCGR",
+	"GCC_QUPV3_WRAP2_S0_CMD_RCGR",
+	"GCC_QUPV3_WRAP2_S1_CMD_RCGR",
+	"GCC_QUPV3_WRAP2_S2_CMD_RCGR",
+	"GCC_QUPV3_WRAP2_S3_CMD_RCGR",
+	"GCC_QUPV3_WRAP2_S4_CMD_RCGR",
+	"GCC_QUPV3_WRAP2_S5_CMD_RCGR",
+	"GCC_RBCPR_MMCX_CMD_RCGR",
+	"GCC_PCIE_2_AUX_CMD_RCGR",
+};
+
 static struct msm_clk_data qcs404_gcc_data = {
 	.resets = sm8250_gcc_resets,
 	.num_resets = ARRAY_SIZE(sm8250_gcc_resets),
@@ -263,6 +372,12 @@ static struct msm_clk_data qcs404_gcc_data = {
 
 	.enable = sm8250_enable,
 	.set_rate = sm8250_set_rate,
+
+	.dbg_pll_addrs = sm8250_gpll_addrs,
+	.num_plls = ARRAY_SIZE(sm8250_gpll_addrs),
+	.dbg_rcg_addrs = sm8250_rcg_addrs,
+	.num_rcgs = ARRAY_SIZE(sm8250_rcg_addrs),
+	.dbg_rcg_names = sm8250_rcg_names,
 };
 
 static const struct udevice_id gcc_sm8250_of_match[] = {
diff --git a/drivers/clk/renesas/clk-rcar-gen3.c b/drivers/clk/renesas/clk-rcar-gen3.c
index b84024266f4..4f1dfbc174a 100644
--- a/drivers/clk/renesas/clk-rcar-gen3.c
+++ b/drivers/clk/renesas/clk-rcar-gen3.c
@@ -69,7 +69,7 @@ static int gen3_clk_get_parent(struct gen3_clk_priv *priv, struct clk *clk,
 			return ret;
 
 		if (core->type == CLK_TYPE_GEN3_MDSEL) {
-			shift = priv->cpg_mode & BIT(core->offset) ? 16 : 0;
+			shift = priv->cpg_mode & BIT(core->offset) ? 0 : 16;
 			parent->dev = clk->dev;
 			parent->id = core->parent >> shift;
 			parent->id &= 0xffff;
@@ -318,7 +318,7 @@ static u64 gen3_clk_get_rate64(struct clk *clk)
 						"FIXED");
 
 	case CLK_TYPE_GEN3_MDSEL:
-		shift = priv->cpg_mode & BIT(core->offset) ? 16 : 0;
+		shift = priv->cpg_mode & BIT(core->offset) ? 0 : 16;
 		div = (core->div >> shift) & 0xffff;
 		rate = gen3_clk_get_rate64(&parent) / div;
 		debug("%s[%i] PE clk: parent=%i div=%u => rate=%llu\n",
diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index c39abe3bc94..6b4330fe4ea 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -152,6 +152,14 @@ config SPL_DM_SEQ_ALIAS
 	  numbered devices (e.g. serial0 = &serial0). This feature can be
 	  disabled if it is not required, to save code space in SPL.
 
+config TPL_DM_SEQ_ALIAS
+	bool "Support numbered aliases in device tree in TPL"
+	depends on TPL_DM
+	help
+	  Most boards will have a '/aliases' node containing the path to
+	  numbered devices (e.g. serial0 = &serial0). This feature can be
+	  disabled if it is not required, to save code space in SPL.
+
 config VPL_DM_SEQ_ALIAS
 	bool "Support numbered aliases in device tree in VPL"
 	depends on VPL_DM
diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig
index 971204758aa..aadd7e8cf7f 100644
--- a/drivers/dfu/Kconfig
+++ b/drivers/dfu/Kconfig
@@ -7,7 +7,7 @@ config DFU
 config DFU_OVER_USB
 	bool
 	select HASH
-	depends on USB_GADGET
+	depends on USB_GADGET_DOWNLOAD
 
 config DFU_OVER_TFTP
 	bool
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 540d48fab77..7a4d7ba2a7f 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -27,6 +27,21 @@ static unsigned long dfu_timeout = 0;
 #endif
 
 bool dfu_reinit_needed = false;
+bool dfu_alt_info_changed = false;
+
+static int on_dfu_alt_info(const char *name, const char *value, enum env_op op,
+			   int flags)
+{
+	switch (op) {
+	case env_op_create:
+	case env_op_overwrite:
+	case env_op_delete:
+		dfu_alt_info_changed = true;
+		break;
+	}
+	return 0;
+}
+U_BOOT_ENV_CALLBACK(dfu_alt_info, on_dfu_alt_info);
 
 /*
  * The purpose of the dfu_flush_callback() function is to
@@ -152,6 +167,7 @@ int dfu_init_env_entities(char *interface, char *devstr)
 	int ret = 0;
 
 	dfu_reinit_needed = false;
+	dfu_alt_info_changed = false;
 
 #ifdef CONFIG_SET_DFU_ALT_INFO
 	set_dfu_alt_info(interface, devstr);
diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
index 8f7ecfa8fc7..c19eb919388 100644
--- a/drivers/dfu/dfu_mmc.c
+++ b/drivers/dfu/dfu_mmc.c
@@ -232,7 +232,8 @@ int dfu_flush_medium_mmc(struct dfu_entity *dfu)
 		break;
 	case DFU_SCRIPT:
 		/* script may have changed the dfu_alt_info */
-		dfu_reinit_needed = true;
+		if (dfu_alt_info_changed)
+			dfu_reinit_needed = true;
 		break;
 	case DFU_RAW_ADDR:
 	case DFU_SKIP:
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3996333fe8d..1e5711663eb 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -700,4 +700,10 @@ config RZG2L_GPIO
 	  Support the gpio functionality of the pin function controller (PFC)
 	  on the Renesas RZ/G2L SoC family.
 
+config SPL_ADP5585_GPIO
+	bool "ADP5585 GPIO driver in SPL"
+	depends on SPL_DM_GPIO && SPL_I2C
+	help
+	  Support ADP5585 GPIO expander in SPL.
+
 endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index da0faf05246..56c20e4c635 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -76,5 +76,5 @@ obj-$(CONFIG_SL28CPLD_GPIO)	+= sl28cpld-gpio.o
 obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN)	+= zynqmp_gpio_modepin.o
 obj-$(CONFIG_SLG7XL45106_I2C_GPO)	+= gpio_slg7xl45106.o
 obj-$(CONFIG_FTGPIO010)		+= ftgpio010.o
-obj-$(CONFIG_ADP5585_GPIO)	+= adp5585_gpio.o
+obj-$(CONFIG_$(SPL_)ADP5585_GPIO)	+= adp5585_gpio.o
 obj-$(CONFIG_RZG2L_GPIO)	+= rzg2l-gpio.o
diff --git a/drivers/gpio/msm_gpio.c b/drivers/gpio/msm_gpio.c
index 2fb266f1285..cea073b3297 100644
--- a/drivers/gpio/msm_gpio.c
+++ b/drivers/gpio/msm_gpio.c
@@ -34,13 +34,31 @@ struct msm_gpio_bank {
 #define GPIO_IN_OUT_REG(dev, x) \
 	(GPIO_CONFIG_REG(dev, x) + 0x4)
 
+static void msm_gpio_direction_input_special(struct msm_gpio_bank *priv,
+					     unsigned int gpio)
+{
+	unsigned int offset = gpio - priv->pin_data->special_pins_start;
+	const struct msm_special_pin_data *data;
+
+	if (!priv->pin_data->special_pins_data)
+		return;
+
+	data = &priv->pin_data->special_pins_data[offset];
+
+	if (!data->ctl_reg || data->oe_bit >= 31)
+		return;
+
+	/* switch direction */
+	clrsetbits_le32(priv->base + data->ctl_reg,
+			BIT(data->oe_bit), 0);
+}
+
 static void msm_gpio_direction_input(struct udevice *dev, unsigned int gpio)
 {
 	struct msm_gpio_bank *priv = dev_get_priv(dev);
 
-	/* Always NOP for special pins, assume they're in the correct state */
 	if (qcom_is_special_pin(priv->pin_data, gpio))
-		return;
+		msm_gpio_direction_input_special(priv, gpio);
 
 	/* Disable OE bit */
 	clrsetbits_le32(priv->base + GPIO_CONFIG_REG(dev, gpio),
@@ -49,13 +67,33 @@ static void msm_gpio_direction_input(struct udevice *dev, unsigned int gpio)
 	return;
 }
 
+static int msm_gpio_set_value_special(struct msm_gpio_bank *priv,
+				      unsigned int gpio, int value)
+{
+	unsigned int offset = gpio - priv->pin_data->special_pins_start;
+	const struct msm_special_pin_data *data;
+
+	if (!priv->pin_data->special_pins_data)
+		return 0;
+
+	data = &priv->pin_data->special_pins_data[offset];
+
+	if (!data->io_reg || data->out_bit >= 31)
+		return 0;
+
+	value = !!value;
+	/* set value */
+	writel(value << data->out_bit, priv->base + data->io_reg);
+
+	return 0;
+}
+
 static int msm_gpio_set_value(struct udevice *dev, unsigned int gpio, int value)
 {
 	struct msm_gpio_bank *priv = dev_get_priv(dev);
 
-	/* Always NOP for special pins, assume they're in the correct state */
 	if (qcom_is_special_pin(priv->pin_data, gpio))
-		return 0;
+		return msm_gpio_set_value_special(priv, gpio, value);
 
 	value = !!value;
 	/* set value */
@@ -64,14 +102,42 @@ static int msm_gpio_set_value(struct udevice *dev, unsigned int gpio, int value)
 	return 0;
 }
 
+static int msm_gpio_direction_output_special(struct msm_gpio_bank *priv,
+					     unsigned int gpio,
+					     int value)
+{
+	unsigned int offset = gpio - priv->pin_data->special_pins_start;
+	const struct msm_special_pin_data *data;
+
+	if (!priv->pin_data->special_pins_data)
+		return 0;
+
+	data = &priv->pin_data->special_pins_data[offset];
+
+	if (!data->io_reg || data->out_bit >= 31)
+		return 0;
+
+	value = !!value;
+	/* set value */
+	writel(value << data->out_bit, priv->base + data->io_reg);
+
+	if (!data->ctl_reg || data->oe_bit >= 31)
+		return 0;
+
+	/* switch direction */
+	clrsetbits_le32(priv->base + data->ctl_reg,
+			BIT(data->oe_bit), BIT(data->oe_bit));
+
+	return 0;
+}
+
 static int msm_gpio_direction_output(struct udevice *dev, unsigned int gpio,
 				     int value)
 {
 	struct msm_gpio_bank *priv = dev_get_priv(dev);
 
-	/* Always NOP for special pins, assume they're in the correct state */
 	if (qcom_is_special_pin(priv->pin_data, gpio))
-		return 0;
+		return msm_gpio_direction_output_special(priv, gpio, value);
 
 	value = !!value;
 	/* set value */
@@ -100,13 +166,28 @@ static int msm_gpio_set_flags(struct udevice *dev, unsigned int gpio, ulong flag
 	return 0;
 }
 
+static int msm_gpio_get_value_special(struct msm_gpio_bank *priv, unsigned int gpio)
+{
+	unsigned int offset = gpio - priv->pin_data->special_pins_start;
+	const struct msm_special_pin_data *data;
+
+	if (!priv->pin_data->special_pins_data)
+		return 0;
+
+	data = &priv->pin_data->special_pins_data[offset];
+
+	if (!data->io_reg || data->in_bit >= 31)
+		return 0;
+
+	return !!(readl(priv->base + data->io_reg) >> data->in_bit);
+}
+
 static int msm_gpio_get_value(struct udevice *dev, unsigned int gpio)
 {
 	struct msm_gpio_bank *priv = dev_get_priv(dev);
 
-	/* Always NOP for special pins, assume they're in the correct state */
 	if (qcom_is_special_pin(priv->pin_data, gpio))
-		return 0;
+		return msm_gpio_get_value_special(priv, gpio);
 
 	return !!(readl(priv->base + GPIO_IN_OUT_REG(dev, gpio)) >> GPIO_IN);
 }
diff --git a/drivers/gpio/qcom_pmic_gpio.c b/drivers/gpio/qcom_pmic_gpio.c
index 80fee841ee3..f2ef4e5ce14 100644
--- a/drivers/gpio/qcom_pmic_gpio.c
+++ b/drivers/gpio/qcom_pmic_gpio.c
@@ -69,17 +69,6 @@
 #define REG_EN_CTL             0x46
 #define REG_EN_CTL_ENABLE      (1 << 7)
 
-/**
- * pmic_gpio_match_data - platform specific configuration
- *
- * @PMIC_MATCH_READONLY: treat all GPIOs as readonly, don't attempt to configure them.
- * This is a workaround for an unknown bug on some platforms where trying to write the
- * GPIO configuration registers causes the board to hang.
- */
-enum pmic_gpio_quirks {
-	QCOM_PMIC_QUIRK_READONLY = (1 << 0),
-};
-
 struct qcom_pmic_gpio_data {
 	uint32_t pid; /* Peripheral ID on SPMI bus */
 	bool     lv_mv_type; /* If subtype is GPIO_LV(0x10) or GPIO_MV(0x11) */
@@ -128,13 +117,8 @@ static int qcom_gpio_set_direction(struct udevice *dev, unsigned int offset,
 {
 	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
 	uint32_t gpio_base = plat->pid + REG_OFFSET(offset);
-	ulong quirks = dev_get_driver_data(dev);
 	int ret = 0;
 
-	/* Some PMICs don't like their GPIOs being configured */
-	if (quirks & QCOM_PMIC_QUIRK_READONLY)
-		return 0;
-
 	/* Disable the GPIO */
 	ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
 			      REG_EN_CTL_ENABLE, 0);
@@ -278,7 +262,6 @@ static int qcom_gpio_bind(struct udevice *dev)
 {
 
 	struct qcom_pmic_gpio_data *plat = dev_get_plat(dev);
-	ulong quirks = dev_get_driver_data(dev);
 	struct udevice *child;
 	struct driver *drv;
 	int ret;
@@ -292,7 +275,7 @@ static int qcom_gpio_bind(struct udevice *dev)
 	/* Bind the GPIO driver as a child of the PMIC. */
 	ret = device_bind_with_driver_data(dev, drv,
 					   dev->name,
-					   quirks, dev_ofnode(dev), &child);
+					   0, dev_ofnode(dev), &child);
 	if (ret)
 		return log_msg_ret("bind", ret);
 
@@ -361,11 +344,11 @@ static int qcom_gpio_probe(struct udevice *dev)
 static const struct udevice_id qcom_gpio_ids[] = {
 	{ .compatible = "qcom,pm8916-gpio" },
 	{ .compatible = "qcom,pm8994-gpio" },	/* 22 GPIO's */
-	{ .compatible = "qcom,pm8998-gpio", .data = QCOM_PMIC_QUIRK_READONLY },
+	{ .compatible = "qcom,pm8998-gpio" },
 	{ .compatible = "qcom,pms405-gpio" },
-	{ .compatible = "qcom,pm6125-gpio", .data = QCOM_PMIC_QUIRK_READONLY },
-	{ .compatible = "qcom,pm8150-gpio", .data = QCOM_PMIC_QUIRK_READONLY },
-	{ .compatible = "qcom,pm8550-gpio", .data = QCOM_PMIC_QUIRK_READONLY },
+	{ .compatible = "qcom,pm6125-gpio" },
+	{ .compatible = "qcom,pm8150-gpio" },
+	{ .compatible = "qcom,pm8550-gpio" },
 	{ }
 };
 
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e53d52c47b3..f7fd1d5caee 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -68,8 +68,8 @@ obj-$(CONFIG_QFW_MMIO) += qfw_mmio.o
 obj-$(CONFIG_QFW_SMBIOS) += qfw_smbios.o
 obj-$(CONFIG_SANDBOX) += qfw_sandbox.o
 endif
-obj-$(CONFIG_ROCKCHIP_EFUSE) += rockchip-efuse.o
-obj-$(CONFIG_ROCKCHIP_OTP) += rockchip-otp.o
+obj-$(CONFIG_$(SPL_TPL_)ROCKCHIP_EFUSE) += rockchip-efuse.o
+obj-$(CONFIG_$(SPL_TPL_)ROCKCHIP_OTP) += rockchip-otp.o
 obj-$(CONFIG_$(SPL_TPL_)ROCKCHIP_IODOMAIN) += rockchip-io-domain.o
 obj-$(CONFIG_SANDBOX) += syscon_sandbox.o misc_sandbox.o
 obj-$(CONFIG_SIFIVE_OTP) += sifive-otp.o
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 982e84dc3bc..22c65681f0a 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -61,6 +61,17 @@ config SPL_DM_MMC
 	  appear as block devices in U-Boot and can support filesystems such
 	  as EXT4 and FAT.
 
+config TPL_DM_MMC
+	bool "Enable MMC controllers using Driver Model in TPL"
+	depends on TPL_DM && DM_MMC
+	select TPL_BLK
+	help
+	  This enables the MultiMediaCard (MMC) uclass which supports MMC and
+	  Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
+	  and non-removable (e.g. eMMC chip) devices are supported. These
+	  appear as block devices in U-Boot and can support filesystems such
+	  as EXT4 and FAT.
+
 if MMC
 
 config MMC_SDHCI_ADMA_HELPERS
diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 03de7dcd505..fb410104c1f 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -148,6 +148,7 @@ struct fsl_esdhc_priv {
 	struct fsl_esdhc *esdhc_regs;
 	unsigned int sdhc_clk;
 	struct clk per_clk;
+	struct clk_bulk clk_bulk;
 	unsigned int clock;
 	unsigned int mode;
 #if !CONFIG_IS_ENABLED(DM_MMC)
@@ -986,11 +987,11 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 	ulong start;
 
 	/* Reset the entire host controller */
-	esdhc_setbits32(&regs->sysctl, SYSCTL_RSTA);
+	esdhc_setbits32(&regs->sysctl, SYSCTL_RSTA | SYSCTL_RSTT);
 
 	/* Wait until the controller is available */
 	start = get_timer(0);
-	while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA)) {
+	while ((esdhc_read32(&regs->sysctl) & (SYSCTL_RSTA | SYSCTL_RSTT))) {
 		if (get_timer(start) > 1000)
 			return -ETIMEDOUT;
 	}
@@ -1034,6 +1035,11 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 	/* Set timout to the maximum value */
 	esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
 
+	/* max 1ms delay with clock on for initialization */
+	esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
+	udelay(1000);
+	esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
+
 	return 0;
 }
 
@@ -1089,11 +1095,11 @@ static int esdhc_reset(struct fsl_esdhc *regs)
 	ulong start;
 
 	/* reset the controller */
-	esdhc_setbits32(&regs->sysctl, SYSCTL_RSTA);
+	esdhc_setbits32(&regs->sysctl, SYSCTL_RSTA | SYSCTL_RSTT);
 
 	/* hardware clears the bit when it is done */
 	start = get_timer(0);
-	while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA)) {
+	while ((esdhc_read32(&regs->sysctl) & (SYSCTL_RSTA | SYSCTL_RSTT))) {
 		if (get_timer(start) > 100) {
 			printf("MMC/SD: Reset never completed.\n");
 			return -ETIMEDOUT;
@@ -1188,8 +1194,6 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
 
 	esdhc_write32(&regs->irqstaten, SDHCI_IRQ_EN_BITS);
 	cfg = &plat->cfg;
-	if (!CONFIG_IS_ENABLED(DM_MMC))
-		memset(cfg, '\0', sizeof(*cfg));
 
 	caps = esdhc_read32(&regs->hostcapblt);
 
@@ -1323,6 +1327,8 @@ int fsl_esdhc_initialize(struct bd_info *bis, struct fsl_esdhc_cfg *cfg)
 		break;
 	default:
 		printf("invalid max bus width %u\n", cfg->max_bus_width);
+		free(plat);
+		free(priv);
 		return -EINVAL;
 	}
 
@@ -1521,14 +1527,21 @@ static int fsl_esdhc_probe(struct udevice *dev)
 
 #if CONFIG_IS_ENABLED(CLK)
 	/* Assigned clock already set clock */
-	ret = clk_get_by_name(dev, "per", &priv->per_clk);
+	ret = clk_get_bulk(dev, &priv->clk_bulk);
 	if (ret) {
-		printf("Failed to get per_clk\n");
+		dev_err(dev, "Failed to get clks: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_enable_bulk(&priv->clk_bulk);
+	if (ret) {
+		dev_err(dev, "Failed to enable clks: %d\n", ret);
 		return ret;
 	}
-	ret = clk_enable(&priv->per_clk);
+
+	ret = clk_get_by_name(dev, "per", &priv->per_clk);
 	if (ret) {
-		printf("Failed to enable per_clk\n");
+		printf("Failed to get per_clk\n");
 		return ret;
 	}
 
@@ -1561,7 +1574,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 
 	upriv->mmc = mmc;
 
-	return esdhc_init_common(priv, mmc);
+	return 0;
 }
 
 static int fsl_esdhc_get_cd(struct udevice *dev)
@@ -1613,6 +1626,14 @@ static int fsl_esdhc_wait_dat0(struct udevice *dev, int state,
 	return esdhc_wait_dat0_common(priv, state, timeout_us);
 }
 
+static int fsl_esdhc_reinit(struct udevice *dev)
+{
+	struct fsl_esdhc_plat *plat = dev_get_plat(dev);
+	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+
+	return esdhc_init_common(priv, &plat->mmc);
+}
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
@@ -1624,6 +1645,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.set_enhanced_strobe = fsl_esdhc_set_enhanced_strobe,
 #endif
 	.wait_dat0 = fsl_esdhc_wait_dat0,
+	.reinit = fsl_esdhc_reinit,
 };
 
 static struct esdhc_soc_data usdhc_imx7d_data = {
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 7e702c3ae85..d4f2fd5bf89 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -3039,6 +3039,20 @@ static int mmc_complete_init(struct mmc *mmc)
 	return err;
 }
 
+static void __maybe_unused mmc_cyclic_cd_poll(struct cyclic_info *c)
+{
+	struct mmc *m = CONFIG_IS_ENABLED(CYCLIC, (container_of(c, struct mmc, cyclic)), (NULL));
+
+	if (!m->has_init)
+		return;
+
+	if (mmc_getcd(m))
+		return;
+
+	mmc_deinit(m);
+	m->has_init = 0;
+}
+
 int mmc_init(struct mmc *mmc)
 {
 	int err = 0;
@@ -3061,6 +3075,14 @@ int mmc_init(struct mmc *mmc)
 	if (err)
 		pr_info("%s: %d, time %lu\n", __func__, err, get_timer(start));
 
+	if (CONFIG_IS_ENABLED(CYCLIC, (!mmc->cyclic.func), (NULL))) {
+		/* Register cyclic function for card detect polling */
+		CONFIG_IS_ENABLED(CYCLIC, (cyclic_register(&mmc->cyclic,
+							   mmc_cyclic_cd_poll,
+							   100 * 1000,
+							   mmc->cfg->name)));
+	}
+
 	return err;
 }
 
@@ -3068,6 +3090,9 @@ int mmc_deinit(struct mmc *mmc)
 {
 	u32 caps_filtered;
 
+	if (CONFIG_IS_ENABLED(CYCLIC, (mmc->cyclic.func), (NULL)))
+		CONFIG_IS_ENABLED(CYCLIC, (cyclic_unregister(&mmc->cyclic)));
+
 	if (!CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) &&
 	    !CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) &&
 	    !CONFIG_IS_ENABLED(MMC_HS400_SUPPORT))
@@ -3188,7 +3213,7 @@ int mmc_init_device(int num)
 	if (uclass_get_device_by_seq(UCLASS_MMC, num, &dev)) {
 		ret = uclass_get_device(UCLASS_MMC, num, &dev);
 		if (ret)
-			return ret;
+			return log_msg_ret("ini", ret);
 	}
 
 	m = mmc_get_mmc_dev(dev);
diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c
index fb77b049834..5ba99d68b7d 100644
--- a/drivers/mmc/rockchip_dw_mmc.c
+++ b/drivers/mmc/rockchip_dw_mmc.c
@@ -80,7 +80,7 @@ static int rockchip_dwmmc_of_to_plat(struct udevice *dev)
 	priv->fifo_depth = dev_read_u32_default(dev, "fifo-depth", 0);
 
 	if (priv->fifo_depth < 0)
-		return -EINVAL;
+		return log_msg_ret("rkp", -EINVAL);
 	priv->fifo_mode = dev_read_bool(dev, "fifo-mode");
 
 #ifdef CONFIG_SPL_BUILD
@@ -96,7 +96,7 @@ static int rockchip_dwmmc_of_to_plat(struct udevice *dev)
 		int val = dev_read_u32_default(dev, "max-frequency", -EINVAL);
 
 		if (val < 0)
-			return val;
+			return log_msg_ret("rkc", val);
 
 		priv->minmax[0] = 400000;  /* 400 kHz */
 		priv->minmax[1] = val;
@@ -131,13 +131,11 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
 	priv->minmax[1] = dtplat->max_frequency;
 
 	ret = clk_get_by_phandle(dev, &dtplat->clocks[1], &priv->clk);
-	if (ret < 0)
-		return ret;
 #else
 	ret = clk_get_by_index(dev, 1, &priv->clk);
-	if (ret < 0)
-		return ret;
 #endif
+	if (ret < 0 && ret != -ENOSYS)
+		return log_msg_ret("clk", ret);
 	host->fifo_depth = priv->fifo_depth;
 	host->fifo_mode = priv->fifo_mode;
 
diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c
index 35667b86b50..4ea3307ed9c 100644
--- a/drivers/mmc/rockchip_sdhci.c
+++ b/drivers/mmc/rockchip_sdhci.c
@@ -230,7 +230,7 @@ static int rk3399_emmc_get_phy(struct udevice *dev)
 
 	grf_base = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
 	if (IS_ERR_OR_NULL(grf_base)) {
-		printf("%s Get syscon grf failed", __func__);
+		printf("%s: Get syscon grf failed\n", __func__);
 		return -ENODEV;
 	}
 	grf_phy_offset = ofnode_read_u32_default(phy_node, "reg", 0);
@@ -571,20 +571,19 @@ static int rockchip_sdhci_probe(struct udevice *dev)
 	struct rockchip_sdhc *priv = dev_get_priv(dev);
 	struct mmc_config *cfg = &plat->cfg;
 	struct sdhci_host *host = &priv->host;
-	struct clk clk;
+	struct clk *clk = &priv->emmc_clk;
 	int ret;
 
 	host->max_clk = cfg->f_max;
-	ret = clk_get_by_index(dev, 0, &clk);
+	ret = clk_get_by_index(dev, 0, clk);
 	if (!ret) {
-		ret = clk_set_rate(&clk, host->max_clk);
+		ret = clk_set_rate(clk, host->max_clk);
 		if (IS_ERR_VALUE(ret))
 			printf("%s clk set rate fail!\n", __func__);
-	} else {
+	} else if (ret != -ENOSYS) {
 		printf("%s fail to get clk\n", __func__);
 	}
 
-	priv->emmc_clk = clk;
 	priv->dev = dev;
 
 	if (data->get_phy) {
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 28d2b456fbf..24d0556cd37 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -105,6 +105,19 @@ struct arasan_sdhci_priv {
 	struct reset_ctl_bulk resets;
 };
 
+enum arasan_sdhci_compatible {
+	SDHCI_COMPATIBLE_SDHCI_89A,
+	SDHCI_COMPATIBLE_VERSAL_NET_EMMC,
+};
+
+static bool arasan_sdhci_is_compatible(struct udevice *dev,
+				       enum arasan_sdhci_compatible family)
+{
+	enum arasan_sdhci_compatible compat = dev_get_driver_data(dev);
+
+	return compat == family;
+}
+
 /* For Versal platforms zynqmp_mmio_write() won't be available */
 __weak int zynqmp_mmio_write(const u32 address, const u32 mask, const u32 value)
 {
@@ -422,7 +435,7 @@ static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
 
 	mdelay(1);
 
-	if (device_is_compatible(mmc->dev, "xlnx,zynqmp-8.9a"))
+	if (arasan_sdhci_is_compatible(mmc->dev, SDHCI_COMPATIBLE_SDHCI_89A))
 		arasan_zynqmp_dll_reset(host, priv->node_id);
 
 	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
@@ -470,7 +483,7 @@ static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
 
 	udelay(1);
 
-	if (device_is_compatible(mmc->dev, "xlnx,zynqmp-8.9a"))
+	if (arasan_sdhci_is_compatible(mmc->dev, SDHCI_COMPATIBLE_SDHCI_89A))
 		arasan_zynqmp_dll_reset(host, priv->node_id);
 
 	/* Enable only interrupts served by the SD controller */
@@ -858,7 +871,7 @@ static int arasan_sdhci_set_tapdelay(struct sdhci_host *host)
 	dev_dbg(dev, "%s, host:%s, mode:%d\n", __func__, host->name, timing);
 
 	if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) &&
-	    device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
+	    arasan_sdhci_is_compatible(dev, SDHCI_COMPATIBLE_SDHCI_89A)) {
 		ret = sdhci_zynqmp_sampleclk_set_phase(host, iclk_phase);
 		if (ret)
 			return ret;
@@ -869,7 +882,7 @@ static int arasan_sdhci_set_tapdelay(struct sdhci_host *host)
 	} else if ((IS_ENABLED(CONFIG_ARCH_VERSAL) ||
 		    IS_ENABLED(CONFIG_ARCH_VERSAL_NET) ||
 		    IS_ENABLED(CONFIG_ARCH_VERSAL2)) &&
-		   device_is_compatible(dev, "xlnx,versal-8.9a")) {
+		   arasan_sdhci_is_compatible(dev, SDHCI_COMPATIBLE_SDHCI_89A)) {
 		ret = sdhci_versal_sampleclk_set_phase(host, iclk_phase);
 		if (ret)
 			return ret;
@@ -879,7 +892,7 @@ static int arasan_sdhci_set_tapdelay(struct sdhci_host *host)
 			return ret;
 	} else if ((IS_ENABLED(CONFIG_ARCH_VERSAL_NET) ||
 		    IS_ENABLED(CONFIG_ARCH_VERSAL2)) &&
-		   device_is_compatible(dev, "xlnx,versal-net-emmc")) {
+		   arasan_sdhci_is_compatible(dev, SDHCI_COMPATIBLE_VERSAL_NET_EMMC)) {
 		if (mmc->clock >= MIN_PHY_CLK_HZ)
 			if (iclk_phase == VERSAL_NET_EMMC_ICLK_PHASE_DDR52_DLY_CHAIN)
 				iclk_phase = VERSAL_NET_EMMC_ICLK_PHASE_DDR52_DLL;
@@ -933,7 +946,7 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev)
 	int i;
 
 	if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) &&
-	    device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
+	    arasan_sdhci_is_compatible(dev, SDHCI_COMPATIBLE_SDHCI_89A)) {
 		for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
 			clk_data->clk_phase_in[i] = zynqmp_iclk_phases[i];
 			clk_data->clk_phase_out[i] = zynqmp_oclk_phases[i];
@@ -948,7 +961,7 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev)
 	if ((IS_ENABLED(CONFIG_ARCH_VERSAL) ||
 	     IS_ENABLED(CONFIG_ARCH_VERSAL_NET) ||
 	     IS_ENABLED(CONFIG_ARCH_VERSAL2)) &&
-	    device_is_compatible(dev, "xlnx,versal-8.9a")) {
+	    arasan_sdhci_is_compatible(dev, SDHCI_COMPATIBLE_SDHCI_89A)) {
 		for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
 			clk_data->clk_phase_in[i] = versal_iclk_phases[i];
 			clk_data->clk_phase_out[i] = versal_oclk_phases[i];
@@ -957,7 +970,7 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev)
 
 	if ((IS_ENABLED(CONFIG_ARCH_VERSAL_NET) ||
 	     IS_ENABLED(CONFIG_ARCH_VERSAL2)) &&
-	    device_is_compatible(dev, "xlnx,versal-net-emmc")) {
+	    arasan_sdhci_is_compatible(dev, SDHCI_COMPATIBLE_VERSAL_NET_EMMC)) {
 		for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
 			clk_data->clk_phase_in[i] = versal_net_emmc_iclk_phases[i];
 			clk_data->clk_phase_out[i] = versal_net_emmc_oclk_phases[i];
@@ -1101,7 +1114,7 @@ static int arasan_sdhci_probe(struct udevice *dev)
 	host = priv->host;
 
 #if defined(CONFIG_ARCH_ZYNQMP) && defined(CONFIG_ZYNQMP_FIRMWARE)
-	if (device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
+	if (arasan_sdhci_is_compatible(dev, SDHCI_COMPATIBLE_SDHCI_89A)) {
 		ret = zynqmp_pm_is_function_supported(PM_IOCTL,
 						      IOCTL_SET_SD_CONFIG);
 		if (!ret) {
@@ -1111,7 +1124,7 @@ static int arasan_sdhci_probe(struct udevice *dev)
 		}
 	}
 #endif
-	if (device_is_compatible(dev, "xlnx,versal-net-emmc"))
+	if (arasan_sdhci_is_compatible(dev, SDHCI_COMPATIBLE_VERSAL_NET_EMMC))
 		priv->internal_phy_reg = true;
 
 	ret = clk_get_by_index(dev, 0, &clk);
@@ -1145,7 +1158,7 @@ static int arasan_sdhci_probe(struct udevice *dev)
 		host->quirks |= SDHCI_QUIRK_NO_1_8_V;
 
 	if (CONFIG_IS_ENABLED(ARCH_VERSAL_NET) &&
-	    device_is_compatible(dev, "xlnx,versal-net-emmc"))
+	    arasan_sdhci_is_compatible(dev, SDHCI_COMPATIBLE_VERSAL_NET_EMMC))
 		host->quirks |= SDHCI_QUIRK_CAPS_BIT63_FOR_HS400;
 
 	plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ;
@@ -1228,8 +1241,8 @@ static int arasan_sdhci_bind(struct udevice *dev)
 }
 
 static const struct udevice_id arasan_sdhci_ids[] = {
-	{ .compatible = "arasan,sdhci-8.9a" },
-	{ .compatible = "xlnx,versal-net-emmc" },
+	{ .compatible = "arasan,sdhci-8.9a", .data = SDHCI_COMPATIBLE_SDHCI_89A },
+	{ .compatible = "xlnx,versal-net-emmc", .data = SDHCI_COMPATIBLE_VERSAL_NET_EMMC },
 	{ }
 };
 
diff --git a/drivers/mtd/altera_qspi.c b/drivers/mtd/altera_qspi.c
index c26615821c8..e5c8df750b7 100644
--- a/drivers/mtd/altera_qspi.c
+++ b/drivers/mtd/altera_qspi.c
@@ -96,7 +96,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 	ret = mtd_erase(mtd, &instr);
 	flash_set_verbose(0);
 	if (ret)
-		return ERR_PROTECTED;
+		return FL_ERR_PROTECTED;
 
 	puts(" done\n");
 	return 0;
@@ -114,7 +114,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 
 	ret = mtd_write(mtd, to, cnt, &retlen, src);
 	if (ret)
-		return ERR_PROTECTED;
+		return FL_ERR_PROTECTED;
 
 	return 0;
 }
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index a7826e81c17..e50502824ac 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -593,11 +593,11 @@ static int flash_status_check(flash_info_t *info, flash_sect_t sector,
 			       flash_read_long(info, sector, 0));
 			flash_write_cmd(info, sector, 0, info->cmd_reset);
 			udelay(1);
-			return ERR_TIMEOUT;
+			return FL_ERR_TIMEOUT;
 		}
 		udelay(1);		/* also triggers watchdog */
 	}
-	return ERR_OK;
+	return FL_ERR_OK;
 }
 
 /*-----------------------------------------------------------------------
@@ -616,9 +616,9 @@ static int flash_full_status_check(flash_info_t *info, flash_sect_t sector,
 	case CFI_CMDSET_INTEL_PROG_REGIONS:
 	case CFI_CMDSET_INTEL_EXTENDED:
 	case CFI_CMDSET_INTEL_STANDARD:
-		if (retcode == ERR_OK &&
+		if (retcode == FL_ERR_OK &&
 		    !flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
-			retcode = ERR_INVAL;
+			retcode = FL_ERR_INVAL;
 			printf("Flash %s error at address %lx\n", prompt,
 			       info->start[sector]);
 			if (flash_isset(info, sector, 0, FLASH_STATUS_ECLBS |
@@ -627,14 +627,14 @@ static int flash_full_status_check(flash_info_t *info, flash_sect_t sector,
 			} else if (flash_isset(info, sector, 0,
 						FLASH_STATUS_ECLBS)) {
 				puts("Block Erase Error.\n");
-				retcode = ERR_NOT_ERASED;
+				retcode = FL_ERR_NOT_ERASED;
 			} else if (flash_isset(info, sector, 0,
 						FLASH_STATUS_PSLBS)) {
 				puts("Locking Error\n");
 			}
 			if (flash_isset(info, sector, 0, FLASH_STATUS_DPS)) {
 				puts("Block locked.\n");
-				retcode = ERR_PROTECTED;
+				retcode = FL_ERR_PROTECTED;
 			}
 			if (flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
 				puts("Vpp Low Error.\n");
@@ -702,12 +702,12 @@ static int flash_status_poll(flash_info_t *info, void *src, void *dst,
 		if (get_timer(start) > tout) {
 			printf("Flash %s timeout at address %lx data %lx\n",
 			       prompt, (ulong)dst, (ulong)flash_read8(dst));
-			return ERR_TIMEOUT;
+			return FL_ERR_TIMEOUT;
 		}
 		udelay(1);		/* also triggers watchdog */
 	}
 #endif /* CONFIG_SYS_CFI_FLASH_STATUS_POLL */
-	return ERR_OK;
+	return FL_ERR_OK;
 }
 
 /*-----------------------------------------------------------------------
@@ -810,7 +810,7 @@ static int flash_write_cfiword(flash_info_t *info, ulong dest, cfiword_t cword)
 		break;
 	}
 	if (!flag)
-		return ERR_NOT_ERASED;
+		return FL_ERR_NOT_ERASED;
 
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
@@ -899,7 +899,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp,
 		shift = 3;
 		break;
 	default:
-		retcode = ERR_INVAL;
+		retcode = FL_ERR_INVAL;
 		goto out_unmap;
 	}
 
@@ -930,7 +930,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp,
 		}
 	}
 	if (!flag) {
-		retcode = ERR_NOT_ERASED;
+		retcode = FL_ERR_NOT_ERASED;
 		goto out_unmap;
 	}
 
@@ -950,7 +950,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp,
 		retcode = flash_status_check(info, sector,
 					     info->buffer_write_tout,
 					     "write to buffer");
-		if (retcode == ERR_OK) {
+		if (retcode == FL_ERR_OK) {
 			/* reduce the number of loops by the width of
 			 * the port
 			 */
@@ -975,7 +975,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp,
 					src += 8, dst += 8;
 					break;
 				default:
-					retcode = ERR_INVAL;
+					retcode = FL_ERR_INVAL;
 					goto out_unmap;
 				}
 			}
@@ -1025,7 +1025,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp,
 			}
 			break;
 		default:
-			retcode = ERR_INVAL;
+			retcode = FL_ERR_INVAL;
 			goto out_unmap;
 		}
 
@@ -1043,7 +1043,7 @@ static int flash_write_cfibuffer(flash_info_t *info, ulong dest, uchar *cp,
 
 	default:
 		debug("Unknown Command Set\n");
-		retcode = ERR_INVAL;
+		retcode = FL_ERR_INVAL;
 		break;
 	}
 
@@ -1389,7 +1389,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		if (i > cnt)
 			i = cnt;
 		rc = flash_write_cfibuffer(info, wp, src, i);
-		if (rc != ERR_OK)
+		if (rc != FL_ERR_OK)
 			return rc;
 		i -= i & (info->portwidth - 1);
 		wp += i;
@@ -1398,7 +1398,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		FLASH_SHOW_PROGRESS(scale, dots, digit, i);
 		/* Only check every once in a while */
 		if ((cnt & 0xFFFF) < buffered_size && ctrlc())
-			return ERR_ABORTED;
+			return FL_ERR_ABORTED;
 	}
 #else
 	while (cnt >= info->portwidth) {
@@ -1413,7 +1413,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		FLASH_SHOW_PROGRESS(scale, dots, digit, info->portwidth);
 		/* Only check every once in a while */
 		if ((cnt & 0xFFFF) < info->portwidth && ctrlc())
-			return ERR_ABORTED;
+			return FL_ERR_ABORTED;
 	}
 #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index b1af3f717d4..749553c9df9 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -25,6 +25,7 @@
 #include <linux/completion.h>
 #include <linux/errno.h>
 #include <linux/log2.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/rawnand.h>
 #include <asm/processor.h>
 #include <dm.h>
@@ -218,6 +219,7 @@ struct brcmnand_controller {
 	const unsigned int	*page_sizes;
 	unsigned int		page_size_shift;
 	unsigned int		max_oob;
+	u32			ecc_level_shift;
 	u32			features;
 
 	/* for low-power standby/resume only */
@@ -544,6 +546,34 @@ enum {
 	INTFC_CTLR_READY		= BIT(31),
 };
 
+/***********************************************************************
+ * NAND ACC CONTROL bitfield
+ *
+ * Some bits have remained constant throughout hardware revision, while
+ * others have shifted around.
+ ***********************************************************************/
+
+/* Constant for all versions (where supported) */
+enum {
+	/* See BRCMNAND_HAS_CACHE_MODE */
+	ACC_CONTROL_CACHE_MODE				= BIT(22),
+
+	/* See BRCMNAND_HAS_PREFETCH */
+	ACC_CONTROL_PREFETCH				= BIT(23),
+
+	ACC_CONTROL_PAGE_HIT				= BIT(24),
+	ACC_CONTROL_WR_PREEMPT				= BIT(25),
+	ACC_CONTROL_PARTIAL_PAGE			= BIT(26),
+	ACC_CONTROL_RD_ERASED				= BIT(27),
+	ACC_CONTROL_FAST_PGM_RDIN			= BIT(28),
+	ACC_CONTROL_WR_ECC				= BIT(30),
+	ACC_CONTROL_RD_ECC				= BIT(31),
+};
+
+#define	ACC_CONTROL_ECC_SHIFT			16
+/* Only for v7.2 */
+#define	ACC_CONTROL_ECC_EXT_SHIFT		13
+
 static inline u32 nand_readreg(struct brcmnand_controller *ctrl, u32 offs)
 {
 	return brcmnand_readl(ctrl->nand_base + offs);
@@ -675,6 +705,12 @@ static int brcmnand_revision_init(struct brcmnand_controller *ctrl)
 #endif /* __UBOOT__ */
 		ctrl->features |= BRCMNAND_HAS_WP;
 
+	/* v7.2 has different ecc level shift in the acc register */
+	if (ctrl->nand_version == 0x0702)
+		ctrl->ecc_level_shift = ACC_CONTROL_ECC_EXT_SHIFT;
+	else
+		ctrl->ecc_level_shift = ACC_CONTROL_ECC_SHIFT;
+
 	return 0;
 }
 
@@ -733,6 +769,20 @@ static inline void brcmnand_write_fc(struct brcmnand_controller *ctrl,
 	__raw_writel(val, ctrl->nand_fc + word * 4);
 }
 
+static inline void brcmnand_read_data_bus(struct brcmnand_controller *ctrl,
+					  void __iomem *flash_cache, u32 *buffer, int fc_words)
+{
+	struct brcmnand_soc *soc = ctrl->soc;
+	int i;
+
+	if (soc && soc->read_data_bus) {
+		soc->read_data_bus(soc, flash_cache, buffer, fc_words);
+	} else {
+		for (i = 0; i < fc_words; i++)
+			buffer[i] = brcmnand_read_fc(ctrl, i);
+	}
+}
+
 static void brcmnand_clear_ecc_addr(struct brcmnand_controller *ctrl)
 {
 
@@ -844,30 +894,6 @@ static inline int brcmnand_cmd_shift(struct brcmnand_controller *ctrl)
 	return 0;
 }
 
-/***********************************************************************
- * NAND ACC CONTROL bitfield
- *
- * Some bits have remained constant throughout hardware revision, while
- * others have shifted around.
- ***********************************************************************/
-
-/* Constant for all versions (where supported) */
-enum {
-	/* See BRCMNAND_HAS_CACHE_MODE */
-	ACC_CONTROL_CACHE_MODE				= BIT(22),
-
-	/* See BRCMNAND_HAS_PREFETCH */
-	ACC_CONTROL_PREFETCH				= BIT(23),
-
-	ACC_CONTROL_PAGE_HIT				= BIT(24),
-	ACC_CONTROL_WR_PREEMPT				= BIT(25),
-	ACC_CONTROL_PARTIAL_PAGE			= BIT(26),
-	ACC_CONTROL_RD_ERASED				= BIT(27),
-	ACC_CONTROL_FAST_PGM_RDIN			= BIT(28),
-	ACC_CONTROL_WR_ECC				= BIT(30),
-	ACC_CONTROL_RD_ECC				= BIT(31),
-};
-
 static inline u32 brcmnand_spare_area_mask(struct brcmnand_controller *ctrl)
 {
 	if (ctrl->nand_version == 0x0702)
@@ -880,18 +906,15 @@ static inline u32 brcmnand_spare_area_mask(struct brcmnand_controller *ctrl)
 		return GENMASK(4, 0);
 }
 
-#define NAND_ACC_CONTROL_ECC_SHIFT	16
-#define NAND_ACC_CONTROL_ECC_EXT_SHIFT	13
-
 static inline u32 brcmnand_ecc_level_mask(struct brcmnand_controller *ctrl)
 {
 	u32 mask = (ctrl->nand_version >= 0x0600) ? 0x1f : 0x0f;
 
-	mask <<= NAND_ACC_CONTROL_ECC_SHIFT;
+	mask <<= ACC_CONTROL_ECC_SHIFT;
 
 	/* v7.2 includes additional ECC levels */
-	if (ctrl->nand_version >= 0x0702)
-		mask |= 0x7 << NAND_ACC_CONTROL_ECC_EXT_SHIFT;
+	if (ctrl->nand_version == 0x0702)
+		mask |= 0x7 << ACC_CONTROL_ECC_EXT_SHIFT;
 
 	return mask;
 }
@@ -905,8 +928,8 @@ static void brcmnand_set_ecc_enabled(struct brcmnand_host *host, int en)
 
 	if (en) {
 		acc_control |= ecc_flags; /* enable RD/WR ECC */
-		acc_control |= host->hwcfg.ecc_level
-			       << NAND_ACC_CONTROL_ECC_SHIFT;
+		acc_control &= ~brcmnand_ecc_level_mask(ctrl);
+		acc_control |= host->hwcfg.ecc_level << ctrl->ecc_level_shift;
 	} else {
 		acc_control &= ~ecc_flags; /* disable RD/WR ECC */
 		acc_control &= ~brcmnand_ecc_level_mask(ctrl);
@@ -957,6 +980,43 @@ static void brcmnand_set_sector_size_1k(struct brcmnand_host *host, int val)
 	nand_writereg(ctrl, acc_control_offs, tmp);
 }
 
+static int brcmnand_get_spare_size(struct brcmnand_host *host)
+{
+	struct brcmnand_controller *ctrl = host->ctrl;
+	u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs,
+						  BRCMNAND_CS_ACC_CONTROL);
+	u32 acc = nand_readreg(ctrl, acc_control_offs);
+
+	return (acc & brcmnand_spare_area_mask(ctrl));
+}
+
+static void brcmnand_get_ecc_settings(struct brcmnand_host *host, struct nand_chip *chip)
+{
+	struct brcmnand_controller *ctrl = host->ctrl;
+	u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs,
+						  BRCMNAND_CS_ACC_CONTROL);
+	bool sector_size_1k = brcmnand_get_sector_size_1k(host);
+	int spare_area_size, ecc_level;
+	u32 acc;
+
+	spare_area_size = brcmnand_get_spare_size(host);
+	acc = nand_readreg(ctrl, acc_control_offs);
+	ecc_level = (acc & brcmnand_ecc_level_mask(ctrl)) >> ctrl->ecc_level_shift;
+	if (sector_size_1k)
+		chip->ecc.strength = ecc_level * 2;
+	else if (spare_area_size == 16 && ecc_level == 15)
+		chip->ecc.strength = 1; /* hamming */
+	else
+		chip->ecc.strength = ecc_level;
+
+	if (chip->ecc.size == 0) {
+		if (sector_size_1k)
+			chip->ecc.size = 1024;
+		else
+			chip->ecc.size = 512;
+	}
+}
+
 /***********************************************************************
  * CS_NAND_SELECT
  ***********************************************************************/
@@ -1003,6 +1063,14 @@ static int bcmnand_ctrl_poll_status(struct brcmnand_controller *ctrl,
 	} while (get_timer(base) < limit);
 #endif /* __UBOOT__ */
 
+	/*
+	 * do a final check after time out in case the CPU was busy and the driver
+	 * did not get enough time to perform the polling to avoid false alarms
+	 */
+	val = brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS);
+	if ((val & mask) == expected_val)
+		return 0;
+
 	dev_warn(ctrl->dev, "timeout on status poll (expected %x got %x)\n",
 		 expected_val, val & mask);
 
@@ -1318,19 +1386,33 @@ static int write_oob_to_regs(struct brcmnand_controller *ctrl, int i,
 			     const u8 *oob, int sas, int sector_1k)
 {
 	int tbytes = sas << sector_1k;
-	int j;
+	int j, k = 0;
+	u32 last = 0xffffffff;
+	u8 *plast = (u8 *)&last;
 
 	/* Adjust OOB values for 1K sector size */
 	if (sector_1k && (i & 0x01))
 		tbytes = max(0, tbytes - (int)ctrl->max_oob);
 	tbytes = min_t(int, tbytes, ctrl->max_oob);
 
-	for (j = 0; j < tbytes; j += 4)
+	/*
+	 * tbytes may not be multiple of words. Make sure we don't read out of
+	 * the boundary and stop at last word.
+	 */
+	for (j = 0; (j + 3) < tbytes; j += 4)
 		oob_reg_write(ctrl, j,
 				(oob[j + 0] << 24) |
 				(oob[j + 1] << 16) |
 				(oob[j + 2] <<  8) |
 				(oob[j + 3] <<  0));
+
+	/* handle the remaing bytes */
+	while (j < tbytes)
+		plast[k++] = oob[j++];
+
+	if (tbytes & 0x3)
+		oob_reg_write(ctrl, (tbytes & ~0x3), (__force u32)cpu_to_be32(last));
+
 	return tbytes;
 }
 
@@ -1781,7 +1863,7 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip,
 {
 	struct brcmnand_host *host = nand_get_controller_data(chip);
 	struct brcmnand_controller *ctrl = host->ctrl;
-	int i, j, ret = 0;
+	int i, ret = 0;
 
 	brcmnand_clear_ecc_addr(ctrl);
 
@@ -1794,8 +1876,8 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip,
 		if (likely(buf)) {
 			brcmnand_soc_data_bus_prepare(ctrl->soc, false);
 
-			for (j = 0; j < FC_WORDS; j++, buf++)
-				*buf = brcmnand_read_fc(ctrl, j);
+			brcmnand_read_data_bus(ctrl, ctrl->nand_fc, buf, FC_WORDS);
+			buf += FC_WORDS;
 
 			brcmnand_soc_data_bus_unprepare(ctrl->soc, false);
 		}
@@ -2225,7 +2307,7 @@ static int brcmnand_set_cfg(struct brcmnand_host *host,
 	tmp &= ~brcmnand_ecc_level_mask(ctrl);
 	tmp &= ~brcmnand_spare_area_mask(ctrl);
 	if (ctrl->nand_version >= 0x0302) {
-		tmp |= cfg->ecc_level << NAND_ACC_CONTROL_ECC_SHIFT;
+		tmp |= cfg->ecc_level << ctrl->ecc_level_shift;
 		tmp |= cfg->spare_area_size;
 	}
 	nand_writereg(ctrl, acc_control_offs, tmp);
@@ -2274,15 +2356,38 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 {
 	struct mtd_info *mtd = nand_to_mtd(&host->chip);
 	struct nand_chip *chip = &host->chip;
+	struct nand_device *nanddev = mtd_to_nanddev(mtd);
+	struct nand_memory_organization *memorg = nanddev_get_memorg(nanddev);
 	struct brcmnand_controller *ctrl = host->ctrl;
 	struct brcmnand_cfg *cfg = &host->hwcfg;
-	char msg[128];
 	u32 offs, tmp, oob_sector;
+	bool use_strap = false;
+	char msg[128];
 	int ret;
 
 	memset(cfg, 0, sizeof(*cfg));
 
 #ifndef __UBOOT__
+	use_strap = of_property_read_bool(nand_get_flash_node(chip),
+					  "brcm,nand-ecc-use-strap"):
+#else
+	use_strap = ofnode_read_bool(nand_get_flash_node(chip),
+				     "brcm,nand-ecc-use-strap");
+#endif /* __UBOOT__ */
+	/*
+	 * Either nand-ecc-xxx or brcm,nand-ecc-use-strap can be set. Error out
+	 * if both exist.
+	 */
+	if (chip->ecc.strength && use_strap) {
+		dev_err(ctrl->dev,
+			"ECC strap and DT ECC configuration properties are mutually exclusive\n");
+		return -EINVAL;
+	}
+
+	if (use_strap)
+		brcmnand_get_ecc_settings(host, chip);
+
+#ifndef __UBOOT__
 	ret = of_property_read_u32(nand_get_flash_node(chip),
 				   "brcm,nand-oob-sector-size",
 				   &oob_sector);
@@ -2291,20 +2396,25 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 			      "brcm,nand-oob-sector-size",
 			      &oob_sector);
 #endif /* __UBOOT__ */
+
 	if (ret) {
-		/* Use detected size */
-		cfg->spare_area_size = mtd->oobsize /
-					(mtd->writesize >> FC_SHIFT);
+		if (use_strap)
+			cfg->spare_area_size = brcmnand_get_spare_size(host);
+		else
+			/* Use detected size */
+			cfg->spare_area_size = mtd->oobsize /
+						(mtd->writesize >> FC_SHIFT);
 	} else {
 		cfg->spare_area_size = oob_sector;
 	}
 	if (cfg->spare_area_size > ctrl->max_oob)
 		cfg->spare_area_size = ctrl->max_oob;
 	/*
-	 * Set oobsize to be consistent with controller's spare_area_size, as
-	 * the rest is inaccessible.
+	 * Set mtd and memorg oobsize to be consistent with controller's
+	 * spare_area_size, as the rest is inaccessible.
 	 */
 	mtd->oobsize = cfg->spare_area_size * (mtd->writesize >> FC_SHIFT);
+	memorg->oobsize = mtd->oobsize;
 
 	cfg->device_size = mtd->size;
 	cfg->block_size = mtd->erasesize;
@@ -2796,8 +2906,17 @@ int brcmnand_probe(struct udevice *dev, struct brcmnand_soc *soc)
 	/* Disable XOR addressing */
 	brcmnand_rmw_reg(ctrl, BRCMNAND_CS_XOR, 0xff, 0, 0);
 
+	/* Check if the board connects the WP pin */
+#ifndef __UBOOT__
+	if (of_property_read_bool(dn, "brcm,wp-not-connected"))
+#else
+	if (dev_read_bool(ctrl->dev, "brcm,wp-not-connected"))
+#endif /* __UBOOT__ */
+		wp_on = 0;
+
 	/* Read the write-protect configuration in the device tree */
-	wp_on = dev_read_u32_default(dev, "write-protect", wp_on);
+	if (dev_read_bool(ctrl->dev, "write-protect"))
+		wp_on = dev_read_u32_default(dev, "write-protect", wp_on);
 
 	if (ctrl->features & BRCMNAND_HAS_WP) {
 		/* Permanently disable write protection */
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.h b/drivers/mtd/nand/raw/brcmnand/brcmnand.h
index 6946a62b067..3a1d6047136 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.h
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.h
@@ -11,6 +11,8 @@ struct brcmnand_soc {
 	void (*ctlrdy_set_enabled)(struct brcmnand_soc *soc, bool en);
 	void (*prepare_data_bus)(struct brcmnand_soc *soc, bool prepare,
 				 bool is_param);
+	void (*read_data_bus)(struct brcmnand_soc *soc, void __iomem *flash_cache,
+			      u32 *buffer, int fc_words);
 	void *ctrl;
 };
 
diff --git a/drivers/mux/mmio.c b/drivers/mux/mmio.c
index e1125458a62..e06f4462b5a 100644
--- a/drivers/mux/mmio.c
+++ b/drivers/mux/mmio.c
@@ -31,6 +31,7 @@ static const struct mux_control_ops mux_mmio_ops = {
 
 static const struct udevice_id mmio_mux_of_match[] = {
 	{ .compatible = "mmio-mux" },
+	{ .compatible = "reg-mux" },
 	{ /* sentinel */ },
 };
 
@@ -45,7 +46,11 @@ static int mmio_mux_probe(struct udevice *dev)
 	int ret;
 	int i;
 
-	regmap = syscon_node_to_regmap(dev_ofnode(dev->parent));
+	if (ofnode_device_is_compatible(dev_ofnode(dev), "mmio-mux"))
+		regmap = syscon_node_to_regmap(dev_ofnode(dev->parent));
+	else
+		regmap_init_mem(dev_ofnode(dev), &regmap);
+
 	if (IS_ERR(regmap)) {
 		ret = PTR_ERR(regmap);
 		dev_err(dev, "failed to get regmap: %d\n", ret);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6ed325517c0..e7d0ddfe25a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -468,6 +468,7 @@ config FTMAC100
 config FTGMAC100
 	bool "Ftgmac100 Ethernet Support"
 	select PHYLIB
+	depends on NET
 	help
 	  This driver supports the Faraday's FTGMAC100 Gigabit SoC
 	  Ethernet controller that can be found on Aspeed SoCs (which
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 0a0d92bc2cd..d6d5cb52fdd 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -615,8 +615,7 @@ static int fecmxc_init(struct udevice *dev)
 	if (fec->xcv_type != SEVENWIRE)
 		miiphy_restart_aneg(dev);
 #endif
-	fec_open(dev);
-	return 0;
+	return fec_open(dev);
 }
 
 /**
@@ -818,6 +817,9 @@ static int fecmxc_recv(struct udevice *dev, int flags, uchar **packetp)
 		return -ENOMEM;
 	}
 
+	if (!(readl(&fec->eth->ecntrl) & FEC_ECNTRL_ETHER_EN))
+		return 0;
+
 	/* Check if any critical events have happened */
 	ievent = readl(&fec->eth->ievent);
 	writel(ievent, &fec->eth->ievent);
@@ -1210,10 +1212,13 @@ static int fecmxc_set_ref_clk(struct clk *clk_ref, phy_interface_t interface)
 	else if (interface == PHY_INTERFACE_MODE_RGMII ||
 		 interface == PHY_INTERFACE_MODE_RGMII_ID ||
 		 interface == PHY_INTERFACE_MODE_RGMII_RXID ||
-		 interface == PHY_INTERFACE_MODE_RGMII_TXID)
+		 interface == PHY_INTERFACE_MODE_RGMII_TXID) {
 		freq = 125000000;
-	else
+		if (is_imx93())
+			freq = freq << 1;
+	} else {
 		return -EINVAL;
+	}
 
 	ret = clk_set_rate(clk_ref, freq);
 	if (ret < 0)
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 19f3f0fef07..63fe4b2d33c 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -26,7 +26,8 @@
 
 #include "fm.h"
 
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
+#if ((defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && \
+     !defined(CONFIG_BITBANGMII))
 
 #define TBIANA_SETTINGS (TBIANA_ASYMMETRIC_PAUSE | TBIANA_SYMMETRIC_PAUSE | \
 			 TBIANA_FULL_DUPLEX)
@@ -701,8 +702,11 @@ static int init_phy(struct fm_eth *fm_eth)
 		supported |= SUPPORTED_2500baseX_Full;
 #endif
 
+#if (CONFIG_IS_ENABLED(MII) || CONFIG_IS_ENABLED(CMD_MII)) && \
+	!CONFIG_IS_ENABLED(BITBANGMII)
 	if (fm_eth->type == FM_ETH_1G_E)
 		dtsec_init_phy(fm_eth);
+#endif
 
 #ifdef CONFIG_PHYLIB
 #ifdef CONFIG_DM_MDIO
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 73064b2af68..a9efc509814 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -368,6 +368,7 @@ config PHY_FIXED
 
 config PHY_NCSI
 	bool "NC-SI based PHY"
+	depends on NET
 
 endif #PHYLIB
 
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index fe7d1084450..461805ae53f 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -228,7 +228,6 @@ struct zynq_gem_priv {
 	struct clk tx_clk;
 	struct clk pclk;
 	u32 max_speed;
-	bool int_pcs;
 	bool dma_64bit;
 	u32 clk_en_info;
 	struct reset_ctl_bulk resets;
@@ -504,8 +503,7 @@ static int zynq_gem_init(struct udevice *dev)
 	 * Set SGMII enable PCS selection only if internal PCS/PMA
 	 * core is used and interface is SGMII.
 	 */
-	if (priv->interface == PHY_INTERFACE_MODE_SGMII &&
-	    priv->int_pcs) {
+	if (priv->interface == PHY_INTERFACE_MODE_SGMII) {
 		nwconfig |= ZYNQ_GEM_NWCFG_SGMII_ENBL |
 			    ZYNQ_GEM_NWCFG_PCS_SEL;
 	}
@@ -529,8 +527,7 @@ static int zynq_gem_init(struct udevice *dev)
 		writel(nwcfg, &regs->nwcfg);
 
 #ifdef CONFIG_ARM64
-	if (priv->interface == PHY_INTERFACE_MODE_SGMII &&
-	    priv->int_pcs) {
+	if (priv->interface == PHY_INTERFACE_MODE_SGMII) {
 		/*
 		 * Disable AN for fixed link configuration, enable otherwise.
 		 * Must be written after PCS_SEL is set in nwconfig,
@@ -992,8 +989,6 @@ static int zynq_gem_of_to_plat(struct udevice *dev)
 		return -EINVAL;
 	priv->interface = pdata->phy_interface;
 
-	priv->int_pcs = dev_read_bool(dev, "is-internal-pcspma");
-
 	priv->clk_en_info = dev_get_driver_data(dev);
 
 	return 0;
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index f5e23f36c56..2c9d5a12127 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -1126,7 +1126,7 @@ static int cdns_sierra_phy_probe(struct udevice *dev)
 
 	sp->autoconf = dev_read_bool(dev, "cdns,autoconf");
 
-	dev_info(dev, "sierra probed\n");
+	dev_dbg(dev, "sierra probed\n");
 	return 0;
 
 clk_disable:
diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
index 3aae1813352..5c77203d606 100644
--- a/drivers/phy/qcom/Kconfig
+++ b/drivers/phy/qcom/Kconfig
@@ -12,6 +12,12 @@ config PHY_QCOM_IPQ4019_USB
 	help
 	  Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
 
+config PHY_QCOM_QMP_UFS
+	tristate "Qualcomm QMP UFS PHY driver"
+	depends on PHY && ARCH_SNAPDRAGON
+	help
+	  Enable this to support the UFS QMP PHY on various Qualcomm chipsets.
+
 config PHY_QCOM_QUSB2
 	tristate "Qualcomm USB QUSB2 PHY driver"
 	depends on PHY && ARCH_SNAPDRAGON
diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
index a5153061dfb..dc3ed492696 100644
--- a/drivers/phy/qcom/Makefile
+++ b/drivers/phy/qcom/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
 obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
+obj-$(CONFIG_PHY_QCOM_QMP_UFS) += phy-qcom-qmp-ufs.o
 obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
 obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2) += phy-qcom-snps-femto-v2.o
 obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o
diff --git a/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v2.h b/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v2.h
new file mode 100644
index 00000000000..a0803a8783d
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v2.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_UFS_V2_H_
+#define QCOM_PHY_QMP_PCS_UFS_V2_H_
+
+#define QPHY_V2_PCS_UFS_PHY_START			0x000
+#define QPHY_V2_PCS_UFS_POWER_DOWN_CONTROL		0x004
+
+#define QPHY_V2_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x034
+#define QPHY_V2_PCS_UFS_TX_LARGE_AMP_POST_EMP_LVL	0x038
+#define QPHY_V2_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x03c
+#define QPHY_V2_PCS_UFS_TX_SMALL_AMP_POST_EMP_LVL	0x040
+
+#define QPHY_V2_PCS_UFS_RX_MIN_STALL_NOCONFIG_TIME_CAP	0x0cc
+#define QPHY_V2_PCS_UFS_RX_SYM_RESYNC_CTRL			0x13c
+#define QPHY_V2_PCS_UFS_RX_MIN_HIBERN8_TIME			0x140
+#define QPHY_V2_PCS_UFS_RX_SIGDET_CTRL2			0x148
+#define QPHY_V2_PCS_UFS_RX_PWM_GEAR_BAND			0x154
+
+#define QPHY_V2_PCS_UFS_READY_STATUS			0x168
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v3.h b/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v3.h
new file mode 100644
index 00000000000..adea13c3a9e
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v3.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_UFS_V3_H_
+#define QCOM_PHY_QMP_PCS_UFS_V3_H_
+
+#define QPHY_V3_PCS_UFS_PHY_START			0x000
+#define QPHY_V3_PCS_UFS_POWER_DOWN_CONTROL		0x004
+#define QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x02c
+#define QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x034
+#define QPHY_V3_PCS_UFS_RX_SYM_RESYNC_CTRL		0x134
+#define QPHY_V3_PCS_UFS_RX_MIN_HIBERN8_TIME		0x138
+#define QPHY_V3_PCS_UFS_RX_SIGDET_CTRL1			0x13c
+#define QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2			0x140
+#define QPHY_V3_PCS_UFS_READY_STATUS			0x160
+#define QPHY_V3_PCS_UFS_TX_MID_TERM_CTRL1		0x1bc
+#define QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1		0x1c4
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v4.h b/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v4.h
new file mode 100644
index 00000000000..a1c7d3d1715
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v4.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_UFS_V4_H_
+#define QCOM_PHY_QMP_PCS_UFS_V4_H_
+
+/* Only for QMP V4 PHY - UFS PCS registers */
+#define QPHY_V4_PCS_UFS_PHY_START			0x000
+#define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL		0x004
+#define QPHY_V4_PCS_UFS_SW_RESET			0x008
+#define QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB	0x00c
+#define QPHY_V4_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB	0x010
+#define QPHY_V4_PCS_UFS_PLL_CNTL			0x02c
+#define QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x030
+#define QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x038
+#define QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL		0x060
+#define QPHY_V4_PCS_UFS_TX_HSGEAR_CAPABILITY		0x074
+#define QPHY_V4_PCS_UFS_RX_HSGEAR_CAPABILITY		0x0b4
+#define QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL		0x124
+#define QPHY_V4_PCS_UFS_LINECFG_DISABLE			0x148
+#define QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME		0x150
+#define QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2			0x158
+#define QPHY_V4_PCS_UFS_TX_PWM_GEAR_BAND		0x160
+#define QPHY_V4_PCS_UFS_TX_HS_GEAR_BAND			0x168
+#define QPHY_V4_PCS_UFS_READY_STATUS			0x180
+#define QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1		0x1d8
+#define QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1		0x1e0
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v5.h b/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v5.h
new file mode 100644
index 00000000000..07959964fcf
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v5.h
@@ -0,0 +1,32 @@
+/* Only for QMP V5 PHY - UFS PCS registers */
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_UFS_V5_H_
+#define QCOM_PHY_QMP_PCS_UFS_V5_H_
+
+/* Only for QMP V5 PHY - UFS PCS registers */
+#define QPHY_V5_PCS_UFS_PHY_START			0x000
+#define QPHY_V5_PCS_UFS_POWER_DOWN_CONTROL		0x004
+#define QPHY_V5_PCS_UFS_SW_RESET			0x008
+#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB	0x00c
+#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB	0x010
+#define QPHY_V5_PCS_UFS_PLL_CNTL			0x02c
+#define QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x030
+#define QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x038
+#define QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL		0x060
+#define QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY		0x074
+#define QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY		0x0b4
+#define QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL		0x124
+#define QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME		0x150
+#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1			0x154
+#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2			0x158
+#define QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND		0x160
+#define QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND			0x168
+#define QPHY_V5_PCS_UFS_READY_STATUS			0x180
+#define QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1		0x1d8
+#define QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1		0x1e0
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v6.h
new file mode 100644
index 00000000000..f19f9892ed7
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-pcs-ufs-v6.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_UFS_V6_H_
+#define QCOM_PHY_QMP_PCS_UFS_V6_H_
+
+/* Only for QMP V6 PHY - UFS PCS registers */
+#define QPHY_V6_PCS_UFS_PHY_START			0x000
+#define QPHY_V6_PCS_UFS_POWER_DOWN_CONTROL		0x004
+#define QPHY_V6_PCS_UFS_SW_RESET			0x008
+#define QPHY_V6_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB	0x00c
+#define QPHY_V6_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB	0x010
+#define QPHY_V6_PCS_UFS_PCS_CTRL1			0x020
+#define QPHY_V6_PCS_UFS_PLL_CNTL			0x02c
+#define QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x030
+#define QPHY_V6_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x038
+#define QPHY_V6_PCS_UFS_BIST_FIXED_PAT_CTRL		0x060
+#define QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY		0x074
+#define QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY		0x0bc
+#define QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY	0x12c
+#define QPHY_V6_PCS_UFS_DEBUG_BUS_CLKSEL		0x158
+#define QPHY_V6_PCS_UFS_LINECFG_DISABLE			0x17c
+#define QPHY_V6_PCS_UFS_RX_MIN_HIBERN8_TIME		0x184
+#define QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2			0x18c
+#define QPHY_V6_PCS_UFS_TX_PWM_GEAR_BAND		0x178
+#define QPHY_V6_PCS_UFS_TX_HS_GEAR_BAND			0x174
+#define QPHY_V6_PCS_UFS_READY_STATUS			0x1a8
+#define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1		0x1f4
+#define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1		0x1fc
+#define QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME		0x220
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S4		0x240
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S5		0x244
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S6		0x248
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S7		0x24c
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-pcs-v2.h b/drivers/phy/qcom/phy-qcom-qmp-pcs-v2.h
new file mode 100644
index 00000000000..bf36399d005
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-pcs-v2.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V2_H_
+#define QCOM_PHY_QMP_PCS_V2_H_
+
+/* Only for QMP V2 PHY - PCS registers */
+#define QPHY_V2_PCS_SW_RESET				0x000
+#define QPHY_V2_PCS_POWER_DOWN_CONTROL			0x004
+#define QPHY_V2_PCS_START_CONTROL			0x008
+#define QPHY_V2_PCS_TXDEEMPH_M6DB_V0			0x024
+#define QPHY_V2_PCS_TXDEEMPH_M3P5DB_V0			0x028
+#define QPHY_V2_PCS_ENDPOINT_REFCLK_DRIVE		0x054
+#define QPHY_V2_PCS_RX_IDLE_DTCT_CNTRL			0x058
+#define QPHY_V2_PCS_POWER_STATE_CONFIG1			0x060
+#define QPHY_V2_PCS_POWER_STATE_CONFIG2			0x064
+#define QPHY_V2_PCS_POWER_STATE_CONFIG4			0x06c
+#define QPHY_V2_PCS_LOCK_DETECT_CONFIG1			0x080
+#define QPHY_V2_PCS_LOCK_DETECT_CONFIG2			0x084
+#define QPHY_V2_PCS_LOCK_DETECT_CONFIG3			0x088
+#define QPHY_V2_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x0a0
+#define QPHY_V2_PCS_LP_WAKEUP_DLY_TIME_AUXCLK		0x0a4
+#define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME		0x0a8
+#define QPHY_V2_PCS_FLL_CNTRL1				0x0c0
+#define QPHY_V2_PCS_FLL_CNTRL2				0x0c4
+#define QPHY_V2_PCS_FLL_CNT_VAL_L			0x0c8
+#define QPHY_V2_PCS_FLL_CNT_VAL_H_TOL			0x0cc
+#define QPHY_V2_PCS_FLL_MAN_CODE			0x0d0
+#define QPHY_V2_PCS_AUTONOMOUS_MODE_CTRL		0x0d4
+#define QPHY_V2_PCS_LFPS_RXTERM_IRQ_CLEAR		0x0d8
+#define QPHY_V2_PCS_LFPS_RXTERM_IRQ_STATUS		0x178
+#define QPHY_V2_PCS_USB_PCS_STATUS			0x17c /* USB */
+#define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB	0x1a8
+#define QPHY_V2_PCS_OSC_DTCT_ACTIONS			0x1ac
+#define QPHY_V2_PCS_RX_SIGDET_LVL			0x1d8
+#define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB	0x1dc
+#define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1e0
+
+#define QPHY_V2_PCS_PCI_PCS_STATUS			0x174 /* PCI */
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-pcs-v3.h b/drivers/phy/qcom/phy-qcom-qmp-pcs-v3.h
new file mode 100644
index 00000000000..10dbbb00620
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-pcs-v3.h
@@ -0,0 +1,145 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V3_H_
+#define QCOM_PHY_QMP_PCS_V3_H_
+
+/* Only for QMP V3 PHY - PCS registers */
+#define QPHY_V3_PCS_SW_RESET				0x000
+#define QPHY_V3_PCS_POWER_DOWN_CONTROL			0x004
+#define QPHY_V3_PCS_START_CONTROL			0x008
+#define QPHY_V3_PCS_TXMGN_V0				0x00c
+#define QPHY_V3_PCS_TXMGN_V1				0x010
+#define QPHY_V3_PCS_TXMGN_V2				0x014
+#define QPHY_V3_PCS_TXMGN_V3				0x018
+#define QPHY_V3_PCS_TXMGN_V4				0x01c
+#define QPHY_V3_PCS_TXMGN_LS				0x020
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V0			0x024
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0			0x028
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V1			0x02c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1			0x030
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V2			0x034
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2			0x038
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V3			0x03c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3			0x040
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_V4			0x044
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4			0x048
+#define QPHY_V3_PCS_TXDEEMPH_M6DB_LS			0x04c
+#define QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS			0x050
+#define QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE		0x054
+#define QPHY_V3_PCS_RX_IDLE_DTCT_CNTRL			0x058
+#define QPHY_V3_PCS_RATE_SLEW_CNTRL			0x05c
+#define QPHY_V3_PCS_POWER_STATE_CONFIG1			0x060
+#define QPHY_V3_PCS_POWER_STATE_CONFIG2			0x064
+#define QPHY_V3_PCS_POWER_STATE_CONFIG3			0x068
+#define QPHY_V3_PCS_POWER_STATE_CONFIG4			0x06c
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L		0x070
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H		0x074
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L			0x078
+#define QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H			0x07c
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG1			0x080
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG2			0x084
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG3			0x088
+#define QPHY_V3_PCS_TSYNC_RSYNC_TIME			0x08c
+#define QPHY_V3_PCS_SIGDET_LOW_2_IDLE_TIME		0x090
+#define QPHY_V3_PCS_BEACON_2_IDLE_TIME_L		0x094
+#define QPHY_V3_PCS_BEACON_2_IDLE_TIME_H		0x098
+#define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_SYSCLK		0x09c
+#define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x0a0
+#define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK		0x0a4
+#define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME		0x0a8
+#define QPHY_V3_PCS_LFPS_DET_HIGH_COUNT_VAL		0x0ac
+#define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK		0x0b0
+#define QPHY_V3_PCS_LFPS_TX_END_CNT_P2U3_START		0x0b4
+#define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME		0x0b8
+#define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME		0x0bc
+#define QPHY_V3_PCS_TXONESZEROS_RUN_LENGTH		0x0c0
+#define QPHY_V3_PCS_FLL_CNTRL1				0x0c4
+#define QPHY_V3_PCS_FLL_CNTRL2				0x0c8
+#define QPHY_V3_PCS_FLL_CNT_VAL_L			0x0cc
+#define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL			0x0d0
+#define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL		0x0d8
+#define QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR		0x0dc
+#define QPHY_V3_PCS_ARCVR_DTCT_EN_PERIOD		0x0e0
+#define QPHY_V3_PCS_ARCVR_DTCT_CM_DLY			0x0e4
+#define QPHY_V3_PCS_ALFPS_DEGLITCH_VAL			0x0e8
+#define QPHY_V3_PCS_INSIG_SW_CTRL1			0x0ec
+#define QPHY_V3_PCS_INSIG_SW_CTRL2			0x0f0
+#define QPHY_V3_PCS_INSIG_SW_CTRL3			0x0f4
+#define QPHY_V3_PCS_INSIG_MX_CTRL1			0x0f8
+#define QPHY_V3_PCS_INSIG_MX_CTRL2			0x0fc
+#define QPHY_V3_PCS_INSIG_MX_CTRL3			0x100
+#define QPHY_V3_PCS_OUTSIG_SW_CTRL1			0x104
+#define QPHY_V3_PCS_OUTSIG_MX_CTRL1			0x108
+#define QPHY_V3_PCS_CLK_DEBUG_BYPASS_CTRL		0x10c
+#define QPHY_V3_PCS_TEST_CONTROL			0x110
+#define QPHY_V3_PCS_TEST_CONTROL2			0x114
+#define QPHY_V3_PCS_TEST_CONTROL3			0x118
+#define QPHY_V3_PCS_TEST_CONTROL4			0x11c
+#define QPHY_V3_PCS_TEST_CONTROL5			0x120
+#define QPHY_V3_PCS_TEST_CONTROL6			0x124
+#define QPHY_V3_PCS_TEST_CONTROL7			0x128
+#define QPHY_V3_PCS_COM_RESET_CONTROL			0x12c
+#define QPHY_V3_PCS_BIST_CTRL				0x130
+#define QPHY_V3_PCS_PRBS_POLY0				0x134
+#define QPHY_V3_PCS_PRBS_POLY1				0x138
+#define QPHY_V3_PCS_PRBS_SEED0				0x13c
+#define QPHY_V3_PCS_PRBS_SEED1				0x140
+#define QPHY_V3_PCS_FIXED_PAT_CTRL			0x144
+#define QPHY_V3_PCS_FIXED_PAT0				0x148
+#define QPHY_V3_PCS_FIXED_PAT1				0x14c
+#define QPHY_V3_PCS_FIXED_PAT2				0x150
+#define QPHY_V3_PCS_FIXED_PAT3				0x154
+#define QPHY_V3_PCS_COM_CLK_SWITCH_CTRL			0x158
+#define QPHY_V3_PCS_ELECIDLE_DLY_SEL			0x15c
+#define QPHY_V3_PCS_SPARE1				0x160
+#define QPHY_V3_PCS_BIST_CHK_ERR_CNT_L_STATUS		0x164
+#define QPHY_V3_PCS_BIST_CHK_ERR_CNT_H_STATUS		0x168
+#define QPHY_V3_PCS_BIST_CHK_STATUS			0x16c
+#define QPHY_V3_PCS_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x170
+#define QPHY_V3_PCS_PCS_STATUS				0x174
+#define QPHY_V3_PCS_PCS_STATUS2				0x178
+#define QPHY_V3_PCS_PCS_STATUS3				0x17c
+#define QPHY_V3_PCS_COM_RESET_STATUS			0x180
+#define QPHY_V3_PCS_OSC_DTCT_STATUS			0x184
+#define QPHY_V3_PCS_REVISION_ID0			0x188
+#define QPHY_V3_PCS_REVISION_ID1			0x18c
+#define QPHY_V3_PCS_REVISION_ID2			0x190
+#define QPHY_V3_PCS_REVISION_ID3			0x194
+#define QPHY_V3_PCS_DEBUG_BUS_0_STATUS			0x198
+#define QPHY_V3_PCS_DEBUG_BUS_1_STATUS			0x19c
+#define QPHY_V3_PCS_DEBUG_BUS_2_STATUS			0x1a0
+#define QPHY_V3_PCS_DEBUG_BUS_3_STATUS			0x1a4
+#define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1a8
+#define QPHY_V3_PCS_OSC_DTCT_ACTIONS			0x1ac
+#define QPHY_V3_PCS_SIGDET_CNTRL			0x1b0
+#define QPHY_V3_PCS_IDAC_CAL_CNTRL			0x1b4
+#define QPHY_V3_PCS_CMN_ACK_OUT_SEL			0x1b8
+#define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME_SYSCLK	0x1bc
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_STATUS		0x1c0
+#define QPHY_V3_PCS_ENDPOINT_REFCLK_CNTRL		0x1c4
+#define QPHY_V3_PCS_EPCLK_PRE_PLL_LOCK_DLY_SYSCLK	0x1c8
+#define QPHY_V3_PCS_EPCLK_PRE_PLL_LOCK_DLY_AUXCLK	0x1cc
+#define QPHY_V3_PCS_EPCLK_DLY_COUNT_VAL_L		0x1d0
+#define QPHY_V3_PCS_EPCLK_DLY_COUNT_VAL_H		0x1d4
+#define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
+#define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB	0x1dc
+#define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1e0
+#define QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL2		0x1e4
+#define QPHY_V3_PCS_RXTERMINATION_DLY_SEL		0x1e8
+#define QPHY_V3_PCS_LFPS_PER_TIMER_VAL			0x1ec
+#define QPHY_V3_PCS_SIGDET_STARTUP_TIMER_VAL		0x1f0
+#define QPHY_V3_PCS_LOCK_DETECT_CONFIG4			0x1f4
+#define QPHY_V3_PCS_RX_SIGDET_DTCT_CNTRL		0x1f8
+#define QPHY_V3_PCS_PCS_STATUS4				0x1fc
+#define QPHY_V3_PCS_PCS_STATUS4_CLEAR			0x200
+#define QPHY_V3_PCS_DEC_ERROR_COUNT_STATUS		0x204
+#define QPHY_V3_PCS_COMMA_POS_STATUS			0x208
+#define QPHY_V3_PCS_REFGEN_REQ_CONFIG1			0x20c
+#define QPHY_V3_PCS_REFGEN_REQ_CONFIG2			0x210
+#define QPHY_V3_PCS_REFGEN_REQ_CONFIG3			0x214
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-pcs-v4.h b/drivers/phy/qcom/phy-qcom-qmp-pcs-v4.h
new file mode 100644
index 00000000000..a2c1eba2b69
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-pcs-v4.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V4_H_
+#define QCOM_PHY_QMP_PCS_V4_H_
+
+/* Only for QMP V4 PHY - USB/PCIe PCS registers */
+#define QPHY_V4_PCS_SW_RESET				0x000
+#define QPHY_V4_PCS_REVISION_ID0			0x004
+#define QPHY_V4_PCS_REVISION_ID1			0x008
+#define QPHY_V4_PCS_REVISION_ID2			0x00c
+#define QPHY_V4_PCS_REVISION_ID3			0x010
+#define QPHY_V4_PCS_PCS_STATUS1				0x014
+#define QPHY_V4_PCS_PCS_STATUS2				0x018
+#define QPHY_V4_PCS_PCS_STATUS3				0x01c
+#define QPHY_V4_PCS_PCS_STATUS4				0x020
+#define QPHY_V4_PCS_PCS_STATUS5				0x024
+#define QPHY_V4_PCS_PCS_STATUS6				0x028
+#define QPHY_V4_PCS_PCS_STATUS7				0x02c
+#define QPHY_V4_PCS_DEBUG_BUS_0_STATUS			0x030
+#define QPHY_V4_PCS_DEBUG_BUS_1_STATUS			0x034
+#define QPHY_V4_PCS_DEBUG_BUS_2_STATUS			0x038
+#define QPHY_V4_PCS_DEBUG_BUS_3_STATUS			0x03c
+#define QPHY_V4_PCS_POWER_DOWN_CONTROL			0x040
+#define QPHY_V4_PCS_START_CONTROL			0x044
+#define QPHY_V4_PCS_INSIG_SW_CTRL1			0x048
+#define QPHY_V4_PCS_INSIG_SW_CTRL2			0x04c
+#define QPHY_V4_PCS_INSIG_SW_CTRL3			0x050
+#define QPHY_V4_PCS_INSIG_SW_CTRL4			0x054
+#define QPHY_V4_PCS_INSIG_SW_CTRL5			0x058
+#define QPHY_V4_PCS_INSIG_SW_CTRL6			0x05c
+#define QPHY_V4_PCS_INSIG_SW_CTRL7			0x060
+#define QPHY_V4_PCS_INSIG_SW_CTRL8			0x064
+#define QPHY_V4_PCS_INSIG_MX_CTRL1			0x068
+#define QPHY_V4_PCS_INSIG_MX_CTRL2			0x06c
+#define QPHY_V4_PCS_INSIG_MX_CTRL3			0x070
+#define QPHY_V4_PCS_INSIG_MX_CTRL4			0x074
+#define QPHY_V4_PCS_INSIG_MX_CTRL5			0x078
+#define QPHY_V4_PCS_INSIG_MX_CTRL7			0x07c
+#define QPHY_V4_PCS_INSIG_MX_CTRL8			0x080
+#define QPHY_V4_PCS_OUTSIG_SW_CTRL1			0x084
+#define QPHY_V4_PCS_OUTSIG_MX_CTRL1			0x088
+#define QPHY_V4_PCS_CLAMP_ENABLE			0x08c
+#define QPHY_V4_PCS_POWER_STATE_CONFIG1			0x090
+#define QPHY_V4_PCS_POWER_STATE_CONFIG2			0x094
+#define QPHY_V4_PCS_FLL_CNTRL1				0x098
+#define QPHY_V4_PCS_FLL_CNTRL2				0x09c
+#define QPHY_V4_PCS_FLL_CNT_VAL_L			0x0a0
+#define QPHY_V4_PCS_FLL_CNT_VAL_H_TOL			0x0a4
+#define QPHY_V4_PCS_FLL_MAN_CODE			0x0a8
+#define QPHY_V4_PCS_TEST_CONTROL1			0x0ac
+#define QPHY_V4_PCS_TEST_CONTROL2			0x0b0
+#define QPHY_V4_PCS_TEST_CONTROL3			0x0b4
+#define QPHY_V4_PCS_TEST_CONTROL4			0x0b8
+#define QPHY_V4_PCS_TEST_CONTROL5			0x0bc
+#define QPHY_V4_PCS_TEST_CONTROL6			0x0c0
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG1			0x0c4
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG2			0x0c8
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG3			0x0cc
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG4			0x0d0
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG5			0x0d4
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG6			0x0d8
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG1			0x0dc
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG2			0x0e0
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG3			0x0e4
+#define QPHY_V4_PCS_BIST_CTRL				0x0e8
+#define QPHY_V4_PCS_PRBS_POLY0				0x0ec
+#define QPHY_V4_PCS_PRBS_POLY1				0x0f0
+#define QPHY_V4_PCS_FIXED_PAT0				0x0f4
+#define QPHY_V4_PCS_FIXED_PAT1				0x0f8
+#define QPHY_V4_PCS_FIXED_PAT2				0x0fc
+#define QPHY_V4_PCS_FIXED_PAT3				0x100
+#define QPHY_V4_PCS_FIXED_PAT4				0x104
+#define QPHY_V4_PCS_FIXED_PAT5				0x108
+#define QPHY_V4_PCS_FIXED_PAT6				0x10c
+#define QPHY_V4_PCS_FIXED_PAT7				0x110
+#define QPHY_V4_PCS_FIXED_PAT8				0x114
+#define QPHY_V4_PCS_FIXED_PAT9				0x118
+#define QPHY_V4_PCS_FIXED_PAT10				0x11c
+#define QPHY_V4_PCS_FIXED_PAT11				0x120
+#define QPHY_V4_PCS_FIXED_PAT12				0x124
+#define QPHY_V4_PCS_FIXED_PAT13				0x128
+#define QPHY_V4_PCS_FIXED_PAT14				0x12c
+#define QPHY_V4_PCS_FIXED_PAT15				0x130
+#define QPHY_V4_PCS_TXMGN_CONFIG			0x134
+#define QPHY_V4_PCS_G12S1_TXMGN_V0			0x138
+#define QPHY_V4_PCS_G12S1_TXMGN_V1			0x13c
+#define QPHY_V4_PCS_G12S1_TXMGN_V2			0x140
+#define QPHY_V4_PCS_G12S1_TXMGN_V3			0x144
+#define QPHY_V4_PCS_G12S1_TXMGN_V4			0x148
+#define QPHY_V4_PCS_G12S1_TXMGN_V0_RS			0x14c
+#define QPHY_V4_PCS_G12S1_TXMGN_V1_RS			0x150
+#define QPHY_V4_PCS_G12S1_TXMGN_V2_RS			0x154
+#define QPHY_V4_PCS_G12S1_TXMGN_V3_RS			0x158
+#define QPHY_V4_PCS_G12S1_TXMGN_V4_RS			0x15c
+#define QPHY_V4_PCS_G3S2_TXMGN_MAIN			0x160
+#define QPHY_V4_PCS_G3S2_TXMGN_MAIN_RS			0x164
+#define QPHY_V4_PCS_G12S1_TXDEEMPH_M6DB			0x168
+#define QPHY_V4_PCS_G12S1_TXDEEMPH_M3P5DB		0x16c
+#define QPHY_V4_PCS_G3S2_PRE_GAIN			0x170
+#define QPHY_V4_PCS_G3S2_POST_GAIN			0x174
+#define QPHY_V4_PCS_G3S2_PRE_POST_OFFSET		0x178
+#define QPHY_V4_PCS_G3S2_PRE_GAIN_RS			0x17c
+#define QPHY_V4_PCS_G3S2_POST_GAIN_RS			0x180
+#define QPHY_V4_PCS_G3S2_PRE_POST_OFFSET_RS		0x184
+#define QPHY_V4_PCS_RX_SIGDET_LVL			0x188
+#define QPHY_V4_PCS_RX_SIGDET_DTCT_CNTRL		0x18c
+#define QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L		0x190
+#define QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H		0x194
+#define QPHY_V4_PCS_RATE_SLEW_CNTRL1			0x198
+#define QPHY_V4_PCS_RATE_SLEW_CNTRL2			0x19c
+#define QPHY_V4_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x1a0
+#define QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L	0x1a4
+#define QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_H	0x1a8
+#define QPHY_V4_PCS_TSYNC_RSYNC_TIME			0x1ac
+#define QPHY_V4_PCS_CDR_RESET_TIME			0x1b0
+#define QPHY_V4_PCS_TSYNC_DLY_TIME			0x1b4
+#define QPHY_V4_PCS_ELECIDLE_DLY_SEL			0x1b8
+#define QPHY_V4_PCS_CMN_ACK_OUT_SEL			0x1bc
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG1		0x1c0
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG2		0x1c4
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG3		0x1c8
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG4		0x1cc
+#define QPHY_V4_PCS_PCS_TX_RX_CONFIG			0x1d0
+#define QPHY_V4_PCS_RX_IDLE_DTCT_CNTRL			0x1d4
+#define QPHY_V4_PCS_RX_DCC_CAL_CONFIG			0x1d8
+#define QPHY_V4_PCS_EQ_CONFIG1				0x1dc
+#define QPHY_V4_PCS_EQ_CONFIG2				0x1e0
+#define QPHY_V4_PCS_EQ_CONFIG3				0x1e4
+#define QPHY_V4_PCS_EQ_CONFIG4				0x1e8
+#define QPHY_V4_PCS_EQ_CONFIG5				0x1ec
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v3.h b/drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v3.h
new file mode 100644
index 00000000000..c0bd54e0e7b
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v3.h
@@ -0,0 +1,111 @@
+
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_COM_V3_H_
+#define QCOM_PHY_QMP_QSERDES_COM_V3_H_
+
+/* Only for QMP V3 PHY - QSERDES COM registers */
+#define QSERDES_V3_COM_ATB_SEL1				0x000
+#define QSERDES_V3_COM_ATB_SEL2				0x004
+#define QSERDES_V3_COM_FREQ_UPDATE			0x008
+#define QSERDES_V3_COM_BG_TIMER				0x00c
+#define QSERDES_V3_COM_SSC_EN_CENTER			0x010
+#define QSERDES_V3_COM_SSC_ADJ_PER1			0x014
+#define QSERDES_V3_COM_SSC_ADJ_PER2			0x018
+#define QSERDES_V3_COM_SSC_PER1				0x01c
+#define QSERDES_V3_COM_SSC_PER2				0x020
+#define QSERDES_V3_COM_SSC_STEP_SIZE1			0x024
+#define QSERDES_V3_COM_SSC_STEP_SIZE2			0x028
+#define QSERDES_V3_COM_POST_DIV				0x02c
+#define QSERDES_V3_COM_POST_DIV_MUX			0x030
+#define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN		0x034
+#define QSERDES_V3_COM_CLK_ENABLE1			0x038
+#define QSERDES_V3_COM_SYS_CLK_CTRL			0x03c
+#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE		0x040
+#define QSERDES_V3_COM_PLL_EN				0x044
+#define QSERDES_V3_COM_PLL_IVCO				0x048
+#define QSERDES_V3_COM_CMN_IETRIM			0x04c
+#define QSERDES_V3_COM_CMN_IPTRIM			0x050
+#define QSERDES_V3_COM_EP_CLOCK_DETECT_CTR		0x054
+#define QSERDES_V3_COM_SYSCLK_DET_COMP_STATUS		0x058
+#define QSERDES_V3_COM_CLK_EP_DIV			0x05c
+#define QSERDES_V3_COM_CP_CTRL_MODE0			0x060
+#define QSERDES_V3_COM_CP_CTRL_MODE1			0x064
+#define QSERDES_V3_COM_PLL_RCTRL_MODE0			0x068
+#define QSERDES_V3_COM_PLL_RCTRL_MODE1			0x06c
+#define QSERDES_V3_COM_PLL_CCTRL_MODE0			0x070
+#define QSERDES_V3_COM_PLL_CCTRL_MODE1			0x074
+#define QSERDES_V3_COM_PLL_CNTRL			0x078
+#define QSERDES_V3_COM_BIAS_EN_CTRL_BY_PSM		0x07c
+#define QSERDES_V3_COM_SYSCLK_EN_SEL			0x080
+#define QSERDES_V3_COM_CML_SYSCLK_SEL			0x084
+#define QSERDES_V3_COM_RESETSM_CNTRL			0x088
+#define QSERDES_V3_COM_RESETSM_CNTRL2			0x08c
+#define QSERDES_V3_COM_LOCK_CMP_EN			0x090
+#define QSERDES_V3_COM_LOCK_CMP_CFG			0x094
+#define QSERDES_V3_COM_LOCK_CMP1_MODE0			0x098
+#define QSERDES_V3_COM_LOCK_CMP2_MODE0			0x09c
+#define QSERDES_V3_COM_LOCK_CMP3_MODE0			0x0a0
+#define QSERDES_V3_COM_LOCK_CMP1_MODE1			0x0a4
+#define QSERDES_V3_COM_LOCK_CMP2_MODE1			0x0a8
+#define QSERDES_V3_COM_LOCK_CMP3_MODE1			0x0ac
+#define QSERDES_V3_COM_DEC_START_MODE0			0x0b0
+#define QSERDES_V3_COM_DEC_START_MODE1			0x0b4
+#define QSERDES_V3_COM_DIV_FRAC_START1_MODE0		0x0b8
+#define QSERDES_V3_COM_DIV_FRAC_START2_MODE0		0x0bc
+#define QSERDES_V3_COM_DIV_FRAC_START3_MODE0		0x0c0
+#define QSERDES_V3_COM_DIV_FRAC_START1_MODE1		0x0c4
+#define QSERDES_V3_COM_DIV_FRAC_START2_MODE1		0x0c8
+#define QSERDES_V3_COM_DIV_FRAC_START3_MODE1		0x0cc
+#define QSERDES_V3_COM_INTEGLOOP_INITVAL		0x0d0
+#define QSERDES_V3_COM_INTEGLOOP_EN			0x0d4
+#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0		0x0d8
+#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0		0x0dc
+#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1		0x0e0
+#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1		0x0e4
+#define QSERDES_V3_COM_VCOCAL_DEADMAN_CTRL		0x0e8
+#define QSERDES_V3_COM_VCO_TUNE_CTRL			0x0ec
+#define QSERDES_V3_COM_VCO_TUNE_MAP			0x0f0
+#define QSERDES_V3_COM_VCO_TUNE1_MODE0			0x0f4
+#define QSERDES_V3_COM_VCO_TUNE2_MODE0			0x0f8
+#define QSERDES_V3_COM_VCO_TUNE1_MODE1			0x0fc
+#define QSERDES_V3_COM_VCO_TUNE2_MODE1			0x100
+#define QSERDES_V3_COM_VCO_TUNE_INITVAL1		0x104
+#define QSERDES_V3_COM_VCO_TUNE_INITVAL2		0x108
+#define QSERDES_V3_COM_VCO_TUNE_MINVAL1			0x10c
+#define QSERDES_V3_COM_VCO_TUNE_MINVAL2			0x110
+#define QSERDES_V3_COM_VCO_TUNE_MAXVAL1			0x114
+#define QSERDES_V3_COM_VCO_TUNE_MAXVAL2			0x118
+#define QSERDES_V3_COM_VCO_TUNE_TIMER1			0x11c
+#define QSERDES_V3_COM_VCO_TUNE_TIMER2			0x120
+#define QSERDES_V3_COM_CMN_STATUS			0x124
+#define QSERDES_V3_COM_RESET_SM_STATUS			0x128
+#define QSERDES_V3_COM_RESTRIM_CODE_STATUS		0x12c
+#define QSERDES_V3_COM_PLLCAL_CODE1_STATUS		0x130
+#define QSERDES_V3_COM_PLLCAL_CODE2_STATUS		0x134
+#define QSERDES_V3_COM_CLK_SELECT			0x138
+#define QSERDES_V3_COM_HSCLK_SEL			0x13c
+#define QSERDES_V3_COM_INTEGLOOP_BINCODE_STATUS		0x140
+#define QSERDES_V3_COM_PLL_ANALOG			0x144
+#define QSERDES_V3_COM_CORECLK_DIV_MODE0		0x148
+#define QSERDES_V3_COM_CORECLK_DIV_MODE1		0x14c
+#define QSERDES_V3_COM_SW_RESET				0x150
+#define QSERDES_V3_COM_CORE_CLK_EN			0x154
+#define QSERDES_V3_COM_C_READY_STATUS			0x158
+#define QSERDES_V3_COM_CMN_CONFIG			0x15c
+#define QSERDES_V3_COM_CMN_RATE_OVERRIDE		0x160
+#define QSERDES_V3_COM_SVS_MODE_CLK_SEL			0x164
+#define QSERDES_V3_COM_DEBUG_BUS0			0x168
+#define QSERDES_V3_COM_DEBUG_BUS1			0x16c
+#define QSERDES_V3_COM_DEBUG_BUS2			0x170
+#define QSERDES_V3_COM_DEBUG_BUS3			0x174
+#define QSERDES_V3_COM_DEBUG_BUS_SEL			0x178
+#define QSERDES_V3_COM_CMN_MISC1			0x17c
+#define QSERDES_V3_COM_CMN_MISC2			0x180
+#define QSERDES_V3_COM_CMN_MODE				0x184
+#define QSERDES_V3_COM_CMN_VREG_SEL			0x188
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v4.h b/drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v4.h
new file mode 100644
index 00000000000..b0e3298d990
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v4.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_COM_V4_H_
+#define QCOM_PHY_QMP_QSERDES_COM_V4_H_
+
+/* Only for QMP V4 PHY - QSERDES COM registers */
+#define QSERDES_V4_COM_ATB_SEL1				0x000
+#define QSERDES_V4_COM_ATB_SEL2				0x004
+#define QSERDES_V4_COM_FREQ_UPDATE			0x008
+#define QSERDES_V4_COM_BG_TIMER				0x00c
+#define QSERDES_V4_COM_SSC_EN_CENTER			0x010
+#define QSERDES_V4_COM_SSC_ADJ_PER1			0x014
+#define QSERDES_V4_COM_SSC_ADJ_PER2			0x018
+#define QSERDES_V4_COM_SSC_PER1				0x01c
+#define QSERDES_V4_COM_SSC_PER2				0x020
+#define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0		0x024
+#define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0		0x028
+#define QSERDES_V4_COM_SSC_STEP_SIZE3_MODE0		0x02c
+#define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1		0x030
+#define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1		0x034
+#define QSERDES_V4_COM_SSC_STEP_SIZE3_MODE1		0x038
+#define QSERDES_V4_COM_POST_DIV				0x03c
+#define QSERDES_V4_COM_POST_DIV_MUX			0x040
+#define QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN		0x044
+#define QSERDES_V4_COM_CLK_ENABLE1			0x048
+#define QSERDES_V4_COM_SYS_CLK_CTRL			0x04c
+#define QSERDES_V4_COM_SYSCLK_BUF_ENABLE		0x050
+#define QSERDES_V4_COM_PLL_EN				0x054
+#define QSERDES_V4_COM_PLL_IVCO				0x058
+#define QSERDES_V4_COM_CMN_IETRIM			0x05c
+#define QSERDES_V4_COM_CMN_IPTRIM			0x060
+#define QSERDES_V4_COM_EP_CLOCK_DETECT_CTRL		0x064
+#define QSERDES_V4_COM_SYSCLK_DET_COMP_STATUS		0x068
+#define QSERDES_V4_COM_CLK_EP_DIV_MODE0			0x06c
+#define QSERDES_V4_COM_CLK_EP_DIV_MODE1			0x070
+#define QSERDES_V4_COM_CP_CTRL_MODE0			0x074
+#define QSERDES_V4_COM_CP_CTRL_MODE1			0x078
+#define QSERDES_V4_COM_PLL_RCTRL_MODE0			0x07c
+#define QSERDES_V4_COM_PLL_RCTRL_MODE1			0x080
+#define QSERDES_V4_COM_PLL_CCTRL_MODE0			0x084
+#define QSERDES_V4_COM_PLL_CCTRL_MODE1			0x088
+#define QSERDES_V4_COM_PLL_CNTRL			0x08c
+#define QSERDES_V4_COM_BIAS_EN_CTRL_BY_PSM		0x090
+#define QSERDES_V4_COM_SYSCLK_EN_SEL			0x094
+#define QSERDES_V4_COM_CML_SYSCLK_SEL			0x098
+#define QSERDES_V4_COM_RESETSM_CNTRL			0x09c
+#define QSERDES_V4_COM_RESETSM_CNTRL2			0x0a0
+#define QSERDES_V4_COM_LOCK_CMP_EN			0x0a4
+#define QSERDES_V4_COM_LOCK_CMP_CFG			0x0a8
+#define QSERDES_V4_COM_LOCK_CMP1_MODE0			0x0ac
+#define QSERDES_V4_COM_LOCK_CMP2_MODE0			0x0b0
+#define QSERDES_V4_COM_LOCK_CMP1_MODE1			0x0b4
+#define QSERDES_V4_COM_LOCK_CMP2_MODE1			0x0b8
+#define QSERDES_V4_COM_DEC_START_MODE0			0x0bc
+#define QSERDES_V4_COM_DEC_START_MSB_MODE0		0x0c0
+#define QSERDES_V4_COM_DEC_START_MODE1			0x0c4
+#define QSERDES_V4_COM_DEC_START_MSB_MODE1		0x0c8
+#define QSERDES_V4_COM_DIV_FRAC_START1_MODE0		0x0cc
+#define QSERDES_V4_COM_DIV_FRAC_START2_MODE0		0x0d0
+#define QSERDES_V4_COM_DIV_FRAC_START3_MODE0		0x0d4
+#define QSERDES_V4_COM_DIV_FRAC_START1_MODE1		0x0d8
+#define QSERDES_V4_COM_DIV_FRAC_START2_MODE1		0x0dc
+#define QSERDES_V4_COM_DIV_FRAC_START3_MODE1		0x0e0
+#define QSERDES_V4_COM_INTEGLOOP_INITVAL		0x0e4
+#define QSERDES_V4_COM_INTEGLOOP_EN			0x0e8
+#define QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0		0x0ec
+#define QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0		0x0f0
+#define QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1		0x0f4
+#define QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1		0x0f8
+#define QSERDES_V4_COM_INTEGLOOP_P_PATH_GAIN0		0x0fc
+#define QSERDES_V4_COM_INTEGLOOP_P_PATH_GAIN1		0x100
+#define QSERDES_V4_COM_VCOCAL_DEADMAN_CTRL		0x104
+#define QSERDES_V4_COM_VCO_TUNE_CTRL			0x108
+#define QSERDES_V4_COM_VCO_TUNE_MAP			0x10c
+#define QSERDES_V4_COM_VCO_TUNE1_MODE0			0x110
+#define QSERDES_V4_COM_VCO_TUNE2_MODE0			0x114
+#define QSERDES_V4_COM_VCO_TUNE1_MODE1			0x118
+#define QSERDES_V4_COM_VCO_TUNE2_MODE1			0x11c
+#define QSERDES_V4_COM_VCO_TUNE_INITVAL1		0x120
+#define QSERDES_V4_COM_VCO_TUNE_INITVAL2		0x124
+#define QSERDES_V4_COM_VCO_TUNE_MINVAL1			0x128
+#define QSERDES_V4_COM_VCO_TUNE_MINVAL2			0x12c
+#define QSERDES_V4_COM_VCO_TUNE_MAXVAL1			0x130
+#define QSERDES_V4_COM_VCO_TUNE_MAXVAL2			0x134
+#define QSERDES_V4_COM_VCO_TUNE_TIMER1			0x138
+#define QSERDES_V4_COM_VCO_TUNE_TIMER2			0x13c
+#define QSERDES_V4_COM_CMN_STATUS			0x140
+#define QSERDES_V4_COM_RESET_SM_STATUS			0x144
+#define QSERDES_V4_COM_RESTRIM_CODE_STATUS		0x148
+#define QSERDES_V4_COM_PLLCAL_CODE1_STATUS		0x14c
+#define QSERDES_V4_COM_PLLCAL_CODE2_STATUS		0x150
+#define QSERDES_V4_COM_CLK_SELECT			0x154
+#define QSERDES_V4_COM_HSCLK_SEL			0x158
+#define QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL		0x15c
+#define QSERDES_V4_COM_INTEGLOOP_BINCODE_STATUS		0x160
+#define QSERDES_V4_COM_PLL_ANALOG			0x164
+#define QSERDES_V4_COM_CORECLK_DIV_MODE0		0x168
+#define QSERDES_V4_COM_CORECLK_DIV_MODE1		0x16c
+#define QSERDES_V4_COM_SW_RESET				0x170
+#define QSERDES_V4_COM_CORE_CLK_EN			0x174
+#define QSERDES_V4_COM_C_READY_STATUS			0x178
+#define QSERDES_V4_COM_CMN_CONFIG			0x17c
+#define QSERDES_V4_COM_CMN_RATE_OVERRIDE		0x180
+#define QSERDES_V4_COM_SVS_MODE_CLK_SEL			0x184
+#define QSERDES_V4_COM_DEBUG_BUS0			0x188
+#define QSERDES_V4_COM_DEBUG_BUS1			0x18c
+#define QSERDES_V4_COM_DEBUG_BUS2			0x190
+#define QSERDES_V4_COM_DEBUG_BUS3			0x194
+#define QSERDES_V4_COM_DEBUG_BUS_SEL			0x198
+#define QSERDES_V4_COM_CMN_MISC1			0x19c
+#define QSERDES_V4_COM_CMN_MISC2			0x1a0
+#define QSERDES_V4_COM_CMN_MODE				0x1a4
+#define QSERDES_V4_COM_VCO_DC_LEVEL_CTRL		0x1a8
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0	0x1ac
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0	0x1b0
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1	0x1b4
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1	0x1b8
+#define QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL		0x1bc
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v6.h b/drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v6.h
new file mode 100644
index 00000000000..328c6c0b0b0
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v6.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_COM_V6_H_
+#define QCOM_PHY_QMP_QSERDES_COM_V6_H_
+
+/* Only for QMP V6 PHY - QSERDES COM registers */
+
+#define QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1			0x00
+#define QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1			0x04
+#define QSERDES_V6_COM_CP_CTRL_MODE1				0x10
+#define QSERDES_V6_COM_PLL_RCTRL_MODE1				0x14
+#define QSERDES_V6_COM_PLL_CCTRL_MODE1				0x18
+#define QSERDES_V6_COM_CORECLK_DIV_MODE1			0x1c
+#define QSERDES_V6_COM_LOCK_CMP1_MODE1				0x20
+#define QSERDES_V6_COM_LOCK_CMP2_MODE1				0x24
+#define QSERDES_V6_COM_DEC_START_MODE1				0x28
+#define QSERDES_V6_COM_DEC_START_MSB_MODE1			0x2c
+#define QSERDES_V6_COM_DIV_FRAC_START1_MODE1			0x30
+#define QSERDES_V6_COM_DIV_FRAC_START2_MODE1			0x34
+#define QSERDES_V6_COM_DIV_FRAC_START3_MODE1			0x38
+#define QSERDES_V6_COM_HSCLK_SEL_1				0x3c
+#define QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE1			0x40
+#define QSERDES_V6_COM_INTEGLOOP_GAIN1_MODE1			0x44
+#define QSERDES_V6_COM_VCO_TUNE1_MODE1				0x48
+#define QSERDES_V6_COM_VCO_TUNE2_MODE1				0x4c
+#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1		0x50
+#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE1		0x54
+#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0		0x58
+#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0		0x5c
+#define QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0			0x60
+#define QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0			0x64
+#define QSERDES_V6_COM_CP_CTRL_MODE0				0x70
+#define QSERDES_V6_COM_PLL_RCTRL_MODE0				0x74
+#define QSERDES_V6_COM_PLL_CCTRL_MODE0				0x78
+#define QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0			0x7c
+#define QSERDES_V6_COM_LOCK_CMP1_MODE0				0x80
+#define QSERDES_V6_COM_LOCK_CMP2_MODE0				0x84
+#define QSERDES_V6_COM_DEC_START_MODE0				0x88
+#define QSERDES_V6_COM_DEC_START_MSB_MODE0			0x8c
+#define QSERDES_V6_COM_DIV_FRAC_START1_MODE0			0x90
+#define QSERDES_V6_COM_DIV_FRAC_START2_MODE0			0x94
+#define QSERDES_V6_COM_DIV_FRAC_START3_MODE0			0x98
+#define QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1			0x9c
+#define QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE0			0xa0
+#define QSERDES_V6_COM_INTEGLOOP_GAIN1_MODE0			0xa4
+#define QSERDES_V6_COM_VCO_TUNE1_MODE0				0xa8
+#define QSERDES_V6_COM_VCO_TUNE2_MODE0				0xac
+#define QSERDES_V6_COM_BG_TIMER					0xbc
+#define QSERDES_V6_COM_SSC_EN_CENTER				0xc0
+#define QSERDES_V6_COM_SSC_ADJ_PER1				0xc4
+#define QSERDES_V6_COM_SSC_PER1					0xcc
+#define QSERDES_V6_COM_SSC_PER2					0xd0
+#define QSERDES_V6_COM_PLL_POST_DIV_MUX				0xd8
+#define QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN			0xdc
+#define QSERDES_V6_COM_CLK_ENABLE1				0xe0
+#define QSERDES_V6_COM_SYS_CLK_CTRL				0xe4
+#define QSERDES_V6_COM_SYSCLK_BUF_ENABLE			0xe8
+#define QSERDES_V6_COM_PLL_IVCO					0xf4
+#define QSERDES_V6_COM_PLL_IVCO_MODE1				0xf8
+#define QSERDES_V6_COM_CMN_IETRIM				0xfc
+#define QSERDES_V6_COM_CMN_IPTRIM				0x100
+#define QSERDES_V6_COM_SYSCLK_EN_SEL				0x110
+#define QSERDES_V6_COM_RESETSM_CNTRL				0x118
+#define QSERDES_V6_COM_LOCK_CMP_EN				0x120
+#define QSERDES_V6_COM_LOCK_CMP_CFG				0x124
+#define QSERDES_V6_COM_VCO_TUNE_CTRL				0x13c
+#define QSERDES_V6_COM_VCO_TUNE_MAP				0x140
+#define QSERDES_V6_COM_VCO_TUNE_INITVAL2			0x148
+#define QSERDES_V6_COM_VCO_TUNE_MAXVAL2				0x158
+#define QSERDES_V6_COM_CLK_SELECT				0x164
+#define QSERDES_V6_COM_CORE_CLK_EN				0x170
+#define QSERDES_V6_COM_CMN_CONFIG_1				0x174
+#define QSERDES_V6_COM_SVS_MODE_CLK_SEL				0x17c
+#define QSERDES_V6_COM_CMN_MISC_1				0x184
+#define QSERDES_V6_COM_CMN_MODE					0x188
+#define QSERDES_V6_COM_PLL_VCO_DC_LEVEL_CTRL			0x198
+#define QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_1			0x1a4
+#define QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_2			0x1a8
+#define QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_3			0x1ac
+#define QSERDES_V6_COM_ADDITIONAL_MISC				0x1b4
+#define QSERDES_V6_COM_ADDITIONAL_MISC_2			0x1b8
+#define QSERDES_V6_COM_ADDITIONAL_MISC_3			0x1bc
+#define QSERDES_V6_COM_CMN_STATUS				0x1d0
+#define QSERDES_V6_COM_C_READY_STATUS				0x1f8
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-qserdes-com.h b/drivers/phy/qcom/phy-qcom-qmp-qserdes-com.h
new file mode 100644
index 00000000000..7fa5363feeb
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-qserdes-com.h
@@ -0,0 +1,140 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_COM_H_
+#define QCOM_PHY_QMP_QSERDES_COM_H_
+
+/* Only for QMP V2 PHY - QSERDES COM registers */
+#define QSERDES_COM_ATB_SEL1				0x000
+#define QSERDES_COM_ATB_SEL2				0x004
+#define QSERDES_COM_FREQ_UPDATE				0x008
+#define QSERDES_COM_BG_TIMER				0x00c
+#define QSERDES_COM_SSC_EN_CENTER			0x010
+#define QSERDES_COM_SSC_ADJ_PER1			0x014
+#define QSERDES_COM_SSC_ADJ_PER2			0x018
+#define QSERDES_COM_SSC_PER1				0x01c
+#define QSERDES_COM_SSC_PER2				0x020
+#define QSERDES_COM_SSC_STEP_SIZE1			0x024
+#define QSERDES_COM_SSC_STEP_SIZE2			0x028
+#define QSERDES_COM_POST_DIV				0x02c
+#define QSERDES_COM_POST_DIV_MUX			0x030
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN			0x034
+#define QSERDES_COM_CLK_ENABLE1				0x038
+#define QSERDES_COM_SYS_CLK_CTRL			0x03c
+#define QSERDES_COM_SYSCLK_BUF_ENABLE			0x040
+#define QSERDES_COM_PLL_EN				0x044
+#define QSERDES_COM_PLL_IVCO				0x048
+#define QSERDES_COM_LOCK_CMP1_MODE0			0x04c
+#define QSERDES_COM_LOCK_CMP2_MODE0			0x050
+#define QSERDES_COM_LOCK_CMP3_MODE0			0x054
+#define QSERDES_COM_LOCK_CMP1_MODE1			0x058
+#define QSERDES_COM_LOCK_CMP2_MODE1			0x05c
+#define QSERDES_COM_LOCK_CMP3_MODE1			0x060
+#define QSERDES_COM_LOCK_CMP1_MODE2			0x064
+#define QSERDES_COM_CMN_RSVD0				0x064
+#define QSERDES_COM_LOCK_CMP2_MODE2			0x068
+#define QSERDES_COM_EP_CLOCK_DETECT_CTRL		0x068
+#define QSERDES_COM_LOCK_CMP3_MODE2			0x06c
+#define QSERDES_COM_SYSCLK_DET_COMP_STATUS		0x06c
+#define QSERDES_COM_BG_TRIM				0x070
+#define QSERDES_COM_CLK_EP_DIV				0x074
+#define QSERDES_COM_CP_CTRL_MODE0			0x078
+#define QSERDES_COM_CP_CTRL_MODE1			0x07c
+#define QSERDES_COM_CP_CTRL_MODE2			0x080
+#define QSERDES_COM_CMN_RSVD1				0x080
+#define QSERDES_COM_PLL_RCTRL_MODE0			0x084
+#define QSERDES_COM_PLL_RCTRL_MODE1			0x088
+#define QSERDES_COM_PLL_RCTRL_MODE2			0x08c
+#define QSERDES_COM_CMN_RSVD2				0x08c
+#define QSERDES_COM_PLL_CCTRL_MODE0			0x090
+#define QSERDES_COM_PLL_CCTRL_MODE1			0x094
+#define QSERDES_COM_PLL_CCTRL_MODE2			0x098
+#define QSERDES_COM_CMN_RSVD3				0x098
+#define QSERDES_COM_PLL_CNTRL				0x09c
+#define QSERDES_COM_PHASE_SEL_CTRL			0x0a0
+#define QSERDES_COM_PHASE_SEL_DC			0x0a4
+#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL		0x0a8
+#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM			0x0a8
+#define QSERDES_COM_SYSCLK_EN_SEL			0x0ac
+#define QSERDES_COM_CML_SYSCLK_SEL			0x0b0
+#define QSERDES_COM_RESETSM_CNTRL			0x0b4
+#define QSERDES_COM_RESETSM_CNTRL2			0x0b8
+#define QSERDES_COM_RESTRIM_CTRL			0x0bc
+#define QSERDES_COM_RESTRIM_CTRL2			0x0c0
+#define QSERDES_COM_RESCODE_DIV_NUM			0x0c4
+#define QSERDES_COM_LOCK_CMP_EN				0x0c8
+#define QSERDES_COM_LOCK_CMP_CFG			0x0cc
+#define QSERDES_COM_DEC_START_MODE0			0x0d0
+#define QSERDES_COM_DEC_START_MODE1			0x0d4
+#define QSERDES_COM_DEC_START_MODE2			0x0d8
+#define QSERDES_COM_VCOCAL_DEADMAN_CTRL			0x0d8
+#define QSERDES_COM_DIV_FRAC_START1_MODE0		0x0dc
+#define QSERDES_COM_DIV_FRAC_START2_MODE0		0x0e0
+#define QSERDES_COM_DIV_FRAC_START3_MODE0		0x0e4
+#define QSERDES_COM_DIV_FRAC_START1_MODE1		0x0e8
+#define QSERDES_COM_DIV_FRAC_START2_MODE1		0x0ec
+#define QSERDES_COM_DIV_FRAC_START3_MODE1		0x0f0
+#define QSERDES_COM_DIV_FRAC_START1_MODE2		0x0f4
+#define QSERDES_COM_VCO_TUNE_MINVAL1			0x0f4
+#define QSERDES_COM_DIV_FRAC_START2_MODE2		0x0f8
+#define QSERDES_COM_VCO_TUNE_MINVAL2			0x0f8
+#define QSERDES_COM_DIV_FRAC_START3_MODE2		0x0fc
+#define QSERDES_COM_CMN_RSVD4				0x0fc
+#define QSERDES_COM_INTEGLOOP_INITVAL			0x100
+#define QSERDES_COM_INTEGLOOP_EN			0x104
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0		0x108
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0		0x10c
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1		0x110
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1		0x114
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE2		0x118
+#define QSERDES_COM_VCO_TUNE_MAXVAL1			0x118
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE2		0x11c
+#define QSERDES_COM_VCO_TUNE_MAXVAL2			0x11c
+#define QSERDES_COM_RES_TRIM_CONTROL2			0x120
+#define QSERDES_COM_VCO_TUNE_CTRL			0x124
+#define QSERDES_COM_VCO_TUNE_MAP			0x128
+#define QSERDES_COM_VCO_TUNE1_MODE0			0x12c
+#define QSERDES_COM_VCO_TUNE2_MODE0			0x130
+#define QSERDES_COM_VCO_TUNE1_MODE1			0x134
+#define QSERDES_COM_VCO_TUNE2_MODE1			0x138
+#define QSERDES_COM_VCO_TUNE1_MODE2			0x13c
+#define QSERDES_COM_VCO_TUNE_INITVAL1			0x13c
+#define QSERDES_COM_VCO_TUNE2_MODE2			0x140
+#define QSERDES_COM_VCO_TUNE_INITVAL2			0x140
+#define QSERDES_COM_VCO_TUNE_TIMER1			0x144
+#define QSERDES_COM_VCO_TUNE_TIMER2			0x148
+#define QSERDES_COM_SAR					0x14c
+#define QSERDES_COM_SAR_CLK				0x150
+#define QSERDES_COM_SAR_CODE_OUT_STATUS			0x154
+#define QSERDES_COM_SAR_CODE_READY_STATUS		0x158
+#define QSERDES_COM_CMN_STATUS				0x15c
+#define QSERDES_COM_RESET_SM_STATUS			0x160
+#define QSERDES_COM_RESTRIM_CODE_STATUS			0x164
+#define QSERDES_COM_PLLCAL_CODE1_STATUS			0x168
+#define QSERDES_COM_PLLCAL_CODE2_STATUS			0x16c
+#define QSERDES_COM_BG_CTRL				0x170
+#define QSERDES_COM_CLK_SELECT				0x174
+#define QSERDES_COM_HSCLK_SEL				0x178
+#define QSERDES_COM_INTEGLOOP_BINCODE_STATUS		0x17c
+#define QSERDES_COM_PLL_ANALOG				0x180
+#define QSERDES_COM_CORECLK_DIV				0x184
+#define QSERDES_COM_SW_RESET				0x188
+#define QSERDES_COM_CORE_CLK_EN				0x18c
+#define QSERDES_COM_C_READY_STATUS			0x190
+#define QSERDES_COM_CMN_CONFIG				0x194
+#define QSERDES_COM_CMN_RATE_OVERRIDE			0x198
+#define QSERDES_COM_SVS_MODE_CLK_SEL			0x19c
+#define QSERDES_COM_DEBUG_BUS0				0x1a0
+#define QSERDES_COM_DEBUG_BUS1				0x1a4
+#define QSERDES_COM_DEBUG_BUS2				0x1a8
+#define QSERDES_COM_DEBUG_BUS3				0x1ac
+#define QSERDES_COM_DEBUG_BUS_SEL			0x1b0
+#define QSERDES_COM_CMN_MISC1				0x1b4
+#define QSERDES_COM_CMN_MISC2				0x1b8
+#define QSERDES_COM_CORECLK_DIV_MODE1			0x1bc
+#define QSERDES_COM_CORECLK_DIV_MODE2			0x1c0
+#define QSERDES_COM_CMN_RSVD5				0x1c4
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-qserdes-pll.h b/drivers/phy/qcom/phy-qcom-qmp-qserdes-pll.h
new file mode 100644
index 00000000000..231e59364e3
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-qserdes-pll.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_PLL_H_
+#define QCOM_PHY_QMP_QSERDES_PLL_H_
+
+/* QMP V2 PHY for PCIE gen3 ports - QSERDES PLL registers */
+#define QSERDES_PLL_BG_TIMER				0x00c
+#define QSERDES_PLL_SSC_EN_CENTER			0x010
+#define QSERDES_PLL_SSC_ADJ_PER1			0x014
+#define QSERDES_PLL_SSC_ADJ_PER2			0x018
+#define QSERDES_PLL_SSC_PER1				0x01c
+#define QSERDES_PLL_SSC_PER2				0x020
+#define QSERDES_PLL_SSC_STEP_SIZE1_MODE0		0x024
+#define QSERDES_PLL_SSC_STEP_SIZE2_MODE0		0x028
+#define QSERDES_PLL_SSC_STEP_SIZE1_MODE1		0x02c
+#define QSERDES_PLL_SSC_STEP_SIZE2_MODE1		0x030
+#define QSERDES_PLL_BIAS_EN_CLKBUFLR_EN			0x03c
+#define QSERDES_PLL_CLK_ENABLE1				0x040
+#define QSERDES_PLL_SYS_CLK_CTRL			0x044
+#define QSERDES_PLL_SYSCLK_BUF_ENABLE			0x048
+#define QSERDES_PLL_PLL_IVCO				0x050
+#define QSERDES_PLL_LOCK_CMP1_MODE0			0x054
+#define QSERDES_PLL_LOCK_CMP2_MODE0			0x058
+#define QSERDES_PLL_LOCK_CMP1_MODE1			0x060
+#define QSERDES_PLL_LOCK_CMP2_MODE1			0x064
+#define QSERDES_PLL_BG_TRIM				0x074
+#define QSERDES_PLL_CLK_EP_DIV_MODE0			0x078
+#define QSERDES_PLL_CLK_EP_DIV_MODE1			0x07c
+#define QSERDES_PLL_CP_CTRL_MODE0			0x080
+#define QSERDES_PLL_CP_CTRL_MODE1			0x084
+#define QSERDES_PLL_PLL_RCTRL_MODE0			0x088
+#define QSERDES_PLL_PLL_RCTRL_MODE1			0x08c
+#define QSERDES_PLL_PLL_CCTRL_MODE0			0x090
+#define QSERDES_PLL_PLL_CCTRL_MODE1			0x094
+#define QSERDES_PLL_BIAS_EN_CTRL_BY_PSM			0x0a4
+#define QSERDES_PLL_SYSCLK_EN_SEL			0x0a8
+#define QSERDES_PLL_RESETSM_CNTRL			0x0b0
+#define QSERDES_PLL_LOCK_CMP_EN				0x0c4
+#define QSERDES_PLL_DEC_START_MODE0			0x0cc
+#define QSERDES_PLL_DEC_START_MODE1			0x0d0
+#define QSERDES_PLL_DIV_FRAC_START1_MODE0		0x0d8
+#define QSERDES_PLL_DIV_FRAC_START2_MODE0		0x0dc
+#define QSERDES_PLL_DIV_FRAC_START3_MODE0		0x0e0
+#define QSERDES_PLL_DIV_FRAC_START1_MODE1		0x0e4
+#define QSERDES_PLL_DIV_FRAC_START2_MODE1		0x0e8
+#define QSERDES_PLL_DIV_FRAC_START3_MODE1		0x0ec
+#define QSERDES_PLL_INTEGLOOP_GAIN0_MODE0		0x100
+#define QSERDES_PLL_INTEGLOOP_GAIN1_MODE0		0x104
+#define QSERDES_PLL_INTEGLOOP_GAIN0_MODE1		0x108
+#define QSERDES_PLL_INTEGLOOP_GAIN1_MODE1		0x10c
+#define QSERDES_PLL_VCO_TUNE_MAP			0x120
+#define QSERDES_PLL_VCO_TUNE1_MODE0			0x124
+#define QSERDES_PLL_VCO_TUNE2_MODE0			0x128
+#define QSERDES_PLL_VCO_TUNE1_MODE1			0x12c
+#define QSERDES_PLL_VCO_TUNE2_MODE1			0x130
+#define QSERDES_PLL_VCO_TUNE_TIMER1			0x13c
+#define QSERDES_PLL_VCO_TUNE_TIMER2			0x140
+#define QSERDES_PLL_CLK_SELECT				0x16c
+#define QSERDES_PLL_HSCLK_SEL				0x170
+#define QSERDES_PLL_CORECLK_DIV				0x17c
+#define QSERDES_PLL_CORE_CLK_EN				0x184
+#define QSERDES_PLL_CMN_CONFIG				0x18c
+#define QSERDES_PLL_SVS_MODE_CLK_SEL			0x194
+#define QSERDES_PLL_CORECLK_DIV_MODE1			0x1b4
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
new file mode 100644
index 00000000000..d17a5235796
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_UFS_V6_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_UFS_V6_H_
+
+#define QSERDES_UFS_V6_TX_RES_CODE_LANE_TX			0x28
+#define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX			0x2c
+#define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX		0x30
+#define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX		0x34
+#define QSERDES_UFS_V6_TX_LANE_MODE_1				0x7c
+#define QSERDES_UFS_V6_TX_FR_DCC_CTRL				0x108
+
+#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2		0x08
+#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4		0x10
+#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4		0x24
+#define QSERDES_UFS_V6_RX_UCDR_SO_SATURATION			0x28
+#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4	0x54
+#define QSERDES_UFS_V6_RX_UCDR_PI_CTRL1				0x58
+#define QSERDES_UFS_V6_RX_RX_TERM_BW_CTRL0			0xc4
+#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2			0xd4
+#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4			0xdc
+#define QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4			0xf0
+#define QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS			0xf4
+#define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL			0x178
+#define QSERDES_UFS_V6_RX_RX_EQU_ADAPTOR_CNTRL4			0x1ac
+#define QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x1bc
+#define QSERDES_UFS_V6_RX_INTERFACE_MODE			0x1e0
+#define QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3			0x1c4
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0			0x208
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1			0x20c
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B2			0x210
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3			0x214
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B4			0x218
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6			0x220
+#define QSERDES_UFS_V6_RX_MODE_RATE2_B3				0x238
+#define QSERDES_UFS_V6_RX_MODE_RATE2_B6				0x244
+#define QSERDES_UFS_V6_RX_MODE_RATE3_B3				0x25c
+#define QSERDES_UFS_V6_RX_MODE_RATE3_B4				0x260
+#define QSERDES_UFS_V6_RX_MODE_RATE3_B5				0x264
+#define QSERDES_UFS_V6_RX_MODE_RATE3_B8				0x270
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B0				0x274
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B1				0x278
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B2				0x27c
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B3				0x280
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B4				0x284
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B6				0x28c
+#define QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL			0x2f8
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v3.h b/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v3.h
new file mode 100644
index 00000000000..161e6df30ea
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v3.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V3_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V3_H_
+
+/* Only for QMP V3 PHY - TX registers */
+#define QSERDES_V3_TX_BIST_MODE_LANENO			0x000
+#define QSERDES_V3_TX_CLKBUF_ENABLE			0x008
+#define QSERDES_V3_TX_TX_EMP_POST1_LVL			0x00c
+#define QSERDES_V3_TX_TX_DRV_LVL			0x01c
+#define QSERDES_V3_TX_RESET_TSYNC_EN			0x024
+#define QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN		0x028
+#define QSERDES_V3_TX_TX_BAND				0x02c
+#define QSERDES_V3_TX_SLEW_CNTL				0x030
+#define QSERDES_V3_TX_INTERFACE_SELECT			0x034
+#define QSERDES_V3_TX_RES_CODE_LANE_TX			0x03c
+#define QSERDES_V3_TX_RES_CODE_LANE_RX			0x040
+#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX		0x044
+#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX		0x048
+#define QSERDES_V3_TX_DEBUG_BUS_SEL			0x058
+#define QSERDES_V3_TX_TRANSCEIVER_BIAS_EN		0x05c
+#define QSERDES_V3_TX_HIGHZ_DRVR_EN			0x060
+#define QSERDES_V3_TX_TX_POL_INV			0x064
+#define QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN	0x068
+#define QSERDES_V3_TX_LANE_MODE_1			0x08c
+#define QSERDES_V3_TX_LANE_MODE_2			0x090
+#define QSERDES_V3_TX_LANE_MODE_3			0x094
+#define QSERDES_V3_TX_RCV_DETECT_LVL_2			0x0a4
+#define QSERDES_V3_TX_TRAN_DRVR_EMP_EN			0x0c0
+#define QSERDES_V3_TX_TX_INTERFACE_MODE			0x0c4
+#define QSERDES_V3_TX_VMODE_CTRL1			0x0f0
+
+/* Only for QMP V3 PHY - RX registers */
+#define QSERDES_V3_RX_UCDR_FO_GAIN			0x008
+#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF			0x00c
+#define QSERDES_V3_RX_UCDR_SO_GAIN			0x014
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF		0x024
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER		0x028
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN			0x02c
+#define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN		0x030
+#define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
+#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW		0x03c
+#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH		0x040
+#define QSERDES_V3_RX_UCDR_PI_CONTROLS			0x044
+#define QSERDES_V3_RX_RX_TERM_BW			0x07c
+#define QSERDES_V3_RX_VGA_CAL_CNTRL1			0x0bc
+#define QSERDES_V3_RX_VGA_CAL_CNTRL2			0x0c0
+#define QSERDES_V3_RX_RX_EQ_GAIN2_LSB			0x0c8
+#define QSERDES_V3_RX_RX_EQ_GAIN2_MSB			0x0cc
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL1		0x0d0
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2		0x0d4
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3		0x0d8
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4		0x0dc
+#define QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1	0x0f8
+#define QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x0fc
+#define QSERDES_V3_RX_SIGDET_ENABLES			0x100
+#define QSERDES_V3_RX_SIGDET_CNTRL			0x104
+#define QSERDES_V3_RX_SIGDET_LVL			0x108
+#define QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL		0x10c
+#define QSERDES_V3_RX_RX_BAND				0x110
+#define QSERDES_V3_RX_RX_INTERFACE_MODE			0x11c
+#define QSERDES_V3_RX_RX_MODE_00			0x164
+#define QSERDES_V3_RX_RX_MODE_01			0x168
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v4.h b/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v4.h
new file mode 100644
index 00000000000..6ee3bec9ac4
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v4.h
@@ -0,0 +1,233 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V4_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V4_H_
+
+/* Only for QMP V4 PHY - TX registers */
+#define QSERDES_V4_TX_BIST_MODE_LANENO			0x000
+#define QSERDES_V4_TX_BIST_INVERT			0x004
+#define QSERDES_V4_TX_CLKBUF_ENABLE			0x008
+#define QSERDES_V4_TX_TX_EMP_POST1_LVL			0x00c
+#define QSERDES_V4_TX_TX_IDLE_LVL_LARGE_AMP		0x010
+#define QSERDES_V4_TX_TX_DRV_LVL			0x014
+#define QSERDES_V4_TX_TX_DRV_LVL_OFFSET			0x018
+#define QSERDES_V4_TX_RESET_TSYNC_EN			0x01c
+#define QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN		0x020
+#define QSERDES_V4_TX_TX_BAND				0x024
+#define QSERDES_V4_TX_SLEW_CNTL				0x028
+#define QSERDES_V4_TX_INTERFACE_SELECT			0x02c
+#define QSERDES_V4_TX_LPB_EN				0x030
+#define QSERDES_V4_TX_RES_CODE_LANE_TX			0x034
+#define QSERDES_V4_TX_RES_CODE_LANE_RX			0x038
+#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX		0x03c
+#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX		0x040
+#define QSERDES_V4_TX_PERL_LENGTH1			0x044
+#define QSERDES_V4_TX_PERL_LENGTH2			0x048
+#define QSERDES_V4_TX_SERDES_BYP_EN_OUT			0x04c
+#define QSERDES_V4_TX_DEBUG_BUS_SEL			0x050
+#define QSERDES_V4_TX_TRANSCEIVER_BIAS_EN		0x054
+#define QSERDES_V4_TX_HIGHZ_DRVR_EN			0x058
+#define QSERDES_V4_TX_TX_POL_INV			0x05c
+#define QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN	0x060
+#define QSERDES_V4_TX_BIST_PATTERN1			0x064
+#define QSERDES_V4_TX_BIST_PATTERN2			0x068
+#define QSERDES_V4_TX_BIST_PATTERN3			0x06c
+#define QSERDES_V4_TX_BIST_PATTERN4			0x070
+#define QSERDES_V4_TX_BIST_PATTERN5			0x074
+#define QSERDES_V4_TX_BIST_PATTERN6			0x078
+#define QSERDES_V4_TX_BIST_PATTERN7			0x07c
+#define QSERDES_V4_TX_BIST_PATTERN8			0x080
+#define QSERDES_V4_TX_LANE_MODE_1			0x084
+#define QSERDES_V4_TX_LANE_MODE_2			0x088
+#define QSERDES_V4_TX_LANE_MODE_3			0x08c
+#define QSERDES_V4_TX_ATB_SEL1				0x090
+#define QSERDES_V4_TX_ATB_SEL2				0x094
+#define QSERDES_V4_TX_RCV_DETECT_LVL			0x098
+#define QSERDES_V4_TX_RCV_DETECT_LVL_2			0x09c
+#define QSERDES_V4_TX_PRBS_SEED1			0x0a0
+#define QSERDES_V4_TX_PRBS_SEED2			0x0a4
+#define QSERDES_V4_TX_PRBS_SEED3			0x0a8
+#define QSERDES_V4_TX_PRBS_SEED4			0x0ac
+#define QSERDES_V4_TX_RESET_GEN				0x0b0
+#define QSERDES_V4_TX_RESET_GEN_MUXES			0x0b4
+#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN			0x0b8
+#define QSERDES_V4_TX_TX_INTERFACE_MODE			0x0bc
+#define QSERDES_V4_TX_PWM_CTRL				0x0c0
+#define QSERDES_V4_TX_PWM_ENCODED_OR_DATA		0x0c4
+#define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND2		0x0c8
+#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND2		0x0cc
+#define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND2		0x0d0
+#define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND2		0x0d4
+#define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1	0x0d8
+#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1	0x0dc
+#define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1	0x0e0
+#define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1	0x0e4
+#define QSERDES_V4_TX_VMODE_CTRL1			0x0e8
+#define QSERDES_V4_TX_ALOG_OBSV_BUS_CTRL_1		0x0ec
+#define QSERDES_V4_TX_BIST_STATUS			0x0f0
+#define QSERDES_V4_TX_BIST_ERROR_COUNT1			0x0f4
+#define QSERDES_V4_TX_BIST_ERROR_COUNT2			0x0f8
+#define QSERDES_V4_TX_ALOG_OBSV_BUS_STATUS_1		0x0fc
+#define QSERDES_V4_TX_LANE_DIG_CONFIG			0x100
+#define QSERDES_V4_TX_PI_QEC_CTRL			0x104
+#define QSERDES_V4_TX_PRE_EMPH				0x108
+#define QSERDES_V4_TX_SW_RESET				0x10c
+#define QSERDES_V4_TX_DCC_OFFSET			0x110
+#define QSERDES_V4_TX_DIG_BKUP_CTRL			0x114
+#define QSERDES_V4_TX_DEBUG_BUS0			0x118
+#define QSERDES_V4_TX_DEBUG_BUS1			0x11c
+#define QSERDES_V4_TX_DEBUG_BUS2			0x120
+#define QSERDES_V4_TX_DEBUG_BUS3			0x124
+#define QSERDES_V4_TX_READ_EQCODE			0x128
+#define QSERDES_V4_TX_READ_OFFSETCODE			0x12c
+#define QSERDES_V4_TX_IA_ERROR_COUNTER_LOW		0x130
+#define QSERDES_V4_TX_IA_ERROR_COUNTER_HIGH		0x134
+#define QSERDES_V4_TX_VGA_READ_CODE			0x138
+#define QSERDES_V4_TX_VTH_READ_CODE			0x13c
+#define QSERDES_V4_TX_DFE_TAP1_READ_CODE		0x140
+#define QSERDES_V4_TX_DFE_TAP2_READ_CODE		0x144
+#define QSERDES_V4_TX_IDAC_STATUS_I			0x148
+#define QSERDES_V4_TX_IDAC_STATUS_IBAR			0x14c
+#define QSERDES_V4_TX_IDAC_STATUS_Q			0x150
+#define QSERDES_V4_TX_IDAC_STATUS_QBAR			0x154
+#define QSERDES_V4_TX_IDAC_STATUS_A			0x158
+#define QSERDES_V4_TX_IDAC_STATUS_ABAR			0x15c
+#define QSERDES_V4_TX_IDAC_STATUS_SM_ON			0x160
+#define QSERDES_V4_TX_IDAC_STATUS_CAL_DONE		0x164
+#define QSERDES_V4_TX_IDAC_STATUS_SIGNERROR		0x168
+#define QSERDES_V4_TX_DCC_CAL_STATUS			0x16c
+
+/* Only for QMP V4 PHY - RX registers */
+#define QSERDES_V4_RX_UCDR_FO_GAIN_HALF			0x000
+#define QSERDES_V4_RX_UCDR_FO_GAIN_QUARTER		0x004
+#define QSERDES_V4_RX_UCDR_FO_GAIN			0x008
+#define QSERDES_V4_RX_UCDR_SO_GAIN_HALF			0x00c
+#define QSERDES_V4_RX_UCDR_SO_GAIN_QUARTER		0x010
+#define QSERDES_V4_RX_UCDR_SO_GAIN			0x014
+#define QSERDES_V4_RX_UCDR_SVS_FO_GAIN_HALF		0x018
+#define QSERDES_V4_RX_UCDR_SVS_FO_GAIN_QUARTER		0x01c
+#define QSERDES_V4_RX_UCDR_SVS_FO_GAIN			0x020
+#define QSERDES_V4_RX_UCDR_SVS_SO_GAIN_HALF		0x024
+#define QSERDES_V4_RX_UCDR_SVS_SO_GAIN_QUARTER		0x028
+#define QSERDES_V4_RX_UCDR_SVS_SO_GAIN			0x02c
+#define QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN		0x030
+#define QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
+#define QSERDES_V4_RX_UCDR_FO_TO_SO_DELAY		0x038
+#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW		0x03c
+#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH		0x040
+#define QSERDES_V4_RX_UCDR_PI_CONTROLS			0x044
+#define QSERDES_V4_RX_UCDR_PI_CTRL2			0x048
+#define QSERDES_V4_RX_UCDR_SB2_THRESH1			0x04c
+#define QSERDES_V4_RX_UCDR_SB2_THRESH2			0x050
+#define QSERDES_V4_RX_UCDR_SB2_GAIN1			0x054
+#define QSERDES_V4_RX_UCDR_SB2_GAIN2			0x058
+#define QSERDES_V4_RX_AUX_CONTROL			0x05c
+#define QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE		0x060
+#define QSERDES_V4_RX_RCLK_AUXDATA_SEL			0x064
+#define QSERDES_V4_RX_AC_JTAG_ENABLE			0x068
+#define QSERDES_V4_RX_AC_JTAG_INITP			0x06c
+#define QSERDES_V4_RX_AC_JTAG_INITN			0x070
+#define QSERDES_V4_RX_AC_JTAG_LVL			0x074
+#define QSERDES_V4_RX_AC_JTAG_MODE			0x078
+#define QSERDES_V4_RX_AC_JTAG_RESET			0x07c
+#define QSERDES_V4_RX_RX_TERM_BW			0x080
+#define QSERDES_V4_RX_RX_RCVR_IQ_EN			0x084
+#define QSERDES_V4_RX_RX_IDAC_I_DC_OFFSETS		0x088
+#define QSERDES_V4_RX_RX_IDAC_IBAR_DC_OFFSETS		0x08c
+#define QSERDES_V4_RX_RX_IDAC_Q_DC_OFFSETS		0x090
+#define QSERDES_V4_RX_RX_IDAC_QBAR_DC_OFFSETS		0x094
+#define QSERDES_V4_RX_RX_IDAC_A_DC_OFFSETS		0x098
+#define QSERDES_V4_RX_RX_IDAC_ABAR_DC_OFFSETS		0x09c
+#define QSERDES_V4_RX_RX_IDAC_EN			0x0a0
+#define QSERDES_V4_RX_RX_IDAC_ENABLES			0x0a4
+#define QSERDES_V4_RX_RX_IDAC_SIGN			0x0a8
+#define QSERDES_V4_RX_RX_HIGHZ_HIGHRATE			0x0ac
+#define QSERDES_V4_RX_RX_TERM_AC_BYPASS_DC_COUPLE_OFFSET 0x0b0
+#define QSERDES_V4_RX_DFE_1				0x0b4
+#define QSERDES_V4_RX_DFE_2				0x0b8
+#define QSERDES_V4_RX_DFE_3				0x0bc
+#define QSERDES_V4_RX_DFE_4				0x0c0
+#define QSERDES_V4_RX_TX_ADAPT_PRE_THRESH1		0x0c4
+#define QSERDES_V4_RX_TX_ADAPT_PRE_THRESH2		0x0c8
+#define QSERDES_V4_RX_TX_ADAPT_POST_THRESH		0x0cc
+#define QSERDES_V4_RX_TX_ADAPT_MAIN_THRESH		0x0d0
+#define QSERDES_V4_RX_VGA_CAL_CNTRL1			0x0d4
+#define QSERDES_V4_RX_VGA_CAL_CNTRL2			0x0d8
+#define QSERDES_V4_RX_GM_CAL				0x0dc
+#define QSERDES_V4_RX_RX_VGA_GAIN2_LSB			0x0e0
+#define QSERDES_V4_RX_RX_VGA_GAIN2_MSB			0x0e4
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1		0x0e8
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2		0x0ec
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3		0x0f0
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4		0x0f4
+#define QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW		0x0f8
+#define QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH		0x0fc
+#define QSERDES_V4_RX_RX_IDAC_MEASURE_TIME		0x100
+#define QSERDES_V4_RX_RX_IDAC_ACCUMULATOR		0x104
+#define QSERDES_V4_RX_RX_EQ_OFFSET_LSB			0x108
+#define QSERDES_V4_RX_RX_EQ_OFFSET_MSB			0x10c
+#define QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1	0x110
+#define QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x114
+#define QSERDES_V4_RX_SIGDET_ENABLES			0x118
+#define QSERDES_V4_RX_SIGDET_CNTRL			0x11c
+#define QSERDES_V4_RX_SIGDET_LVL			0x120
+#define QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL		0x124
+#define QSERDES_V4_RX_RX_BAND				0x128
+#define QSERDES_V4_RX_CDR_FREEZE_UP_DN			0x12c
+#define QSERDES_V4_RX_CDR_RESET_OVERRIDE		0x130
+#define QSERDES_V4_RX_RX_INTERFACE_MODE			0x134
+#define QSERDES_V4_RX_JITTER_GEN_MODE			0x138
+#define QSERDES_V4_RX_SJ_AMP1				0x13c
+#define QSERDES_V4_RX_SJ_AMP2				0x140
+#define QSERDES_V4_RX_SJ_PER1				0x144
+#define QSERDES_V4_RX_SJ_PER2				0x148
+#define QSERDES_V4_RX_PPM_OFFSET1			0x14c
+#define QSERDES_V4_RX_PPM_OFFSET2			0x150
+#define QSERDES_V4_RX_SIGN_PPM_PERIOD1			0x154
+#define QSERDES_V4_RX_SIGN_PPM_PERIOD2			0x158
+#define QSERDES_V4_RX_RX_PWM_ENABLE_AND_DATA		0x15c
+#define QSERDES_V4_RX_RX_PWM_GEAR1_TIMEOUT_COUNT	0x160
+#define QSERDES_V4_RX_RX_PWM_GEAR2_TIMEOUT_COUNT	0x164
+#define QSERDES_V4_RX_RX_PWM_GEAR3_TIMEOUT_COUNT	0x168
+#define QSERDES_V4_RX_RX_PWM_GEAR4_TIMEOUT_COUNT	0x16c
+#define QSERDES_V4_RX_RX_MODE_00_LOW			0x170
+#define QSERDES_V4_RX_RX_MODE_00_HIGH			0x174
+#define QSERDES_V4_RX_RX_MODE_00_HIGH2			0x178
+#define QSERDES_V4_RX_RX_MODE_00_HIGH3			0x17c
+#define QSERDES_V4_RX_RX_MODE_00_HIGH4			0x180
+#define QSERDES_V4_RX_RX_MODE_01_LOW			0x184
+#define QSERDES_V4_RX_RX_MODE_01_HIGH			0x188
+#define QSERDES_V4_RX_RX_MODE_01_HIGH2			0x18c
+#define QSERDES_V4_RX_RX_MODE_01_HIGH3			0x190
+#define QSERDES_V4_RX_RX_MODE_01_HIGH4			0x194
+#define QSERDES_V4_RX_RX_MODE_10_LOW			0x198
+#define QSERDES_V4_RX_RX_MODE_10_HIGH			0x19c
+#define QSERDES_V4_RX_RX_MODE_10_HIGH2			0x1a0
+#define QSERDES_V4_RX_RX_MODE_10_HIGH3			0x1a4
+#define QSERDES_V4_RX_RX_MODE_10_HIGH4			0x1a8
+#define QSERDES_V4_RX_PHPRE_CTRL			0x1ac
+#define QSERDES_V4_RX_PHPRE_INITVAL			0x1b0
+#define QSERDES_V4_RX_DFE_EN_TIMER			0x1b4
+#define QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET		0x1b8
+#define QSERDES_V4_RX_DCC_CTRL1				0x1bc
+#define QSERDES_V4_RX_DCC_CTRL2				0x1c0
+#define QSERDES_V4_RX_VTH_CODE				0x1c4
+#define QSERDES_V4_RX_VTH_MIN_THRESH			0x1c8
+#define QSERDES_V4_RX_VTH_MAX_THRESH			0x1cc
+#define QSERDES_V4_RX_ALOG_OBSV_BUS_CTRL_1		0x1d0
+#define QSERDES_V4_RX_PI_CTRL1				0x1d4
+#define QSERDES_V4_RX_PI_CTRL2				0x1d8
+#define QSERDES_V4_RX_PI_QUAD				0x1dc
+#define QSERDES_V4_RX_IDATA1				0x1e0
+#define QSERDES_V4_RX_IDATA2				0x1e4
+#define QSERDES_V4_RX_AUX_DATA1				0x1e8
+#define QSERDES_V4_RX_AUX_DATA2				0x1ec
+#define QSERDES_V4_RX_AC_JTAG_OUTP			0x1f0
+#define QSERDES_V4_RX_AC_JTAG_OUTN			0x1f4
+#define QSERDES_V4_RX_RX_SIGDET				0x1f8
+#define QSERDES_V4_RX_ALOG_OBSV_BUS_STATUS_1		0x1fc
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx.h b/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx.h
new file mode 100644
index 00000000000..d20694513eb
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx.h
@@ -0,0 +1,205 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_H_
+
+/* Only for QMP V2 PHY - TX registers */
+#define QSERDES_TX_BIST_MODE_LANENO			0x000
+#define QSERDES_TX_BIST_INVERT				0x004
+#define QSERDES_TX_CLKBUF_ENABLE			0x008
+#define QSERDES_TX_CMN_CONTROL_ONE			0x00c
+#define QSERDES_TX_CMN_CONTROL_TWO			0x010
+#define QSERDES_TX_CMN_CONTROL_THREE			0x014
+#define QSERDES_TX_TX_EMP_POST1_LVL			0x018
+#define QSERDES_TX_TX_POST2_EMPH			0x01c
+#define QSERDES_TX_TX_BOOST_LVL_UP_DN			0x020
+#define QSERDES_TX_HP_PD_ENABLES			0x024
+#define QSERDES_TX_TX_IDLE_LVL_LARGE_AMP		0x028
+#define QSERDES_TX_TX_DRV_LVL				0x02c
+#define QSERDES_TX_TX_DRV_LVL_OFFSET			0x030
+#define QSERDES_TX_RESET_TSYNC_EN			0x034
+#define QSERDES_TX_PRE_STALL_LDO_BOOST_EN		0x038
+#define QSERDES_TX_TX_BAND				0x03c
+#define QSERDES_TX_SLEW_CNTL				0x040
+#define QSERDES_TX_INTERFACE_SELECT			0x044
+#define QSERDES_TX_LPB_EN				0x048
+#define QSERDES_TX_RES_CODE_LANE_TX			0x04c
+#define QSERDES_TX_RES_CODE_LANE_RX			0x050
+#define QSERDES_TX_RES_CODE_LANE_OFFSET			0x054
+#define QSERDES_TX_PERL_LENGTH1				0x058
+#define QSERDES_TX_PERL_LENGTH2				0x05c
+#define QSERDES_TX_SERDES_BYP_EN_OUT			0x060
+#define QSERDES_TX_DEBUG_BUS_SEL			0x064
+#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN	0x068
+#define QSERDES_TX_TX_POL_INV				0x06c
+#define QSERDES_TX_PARRATE_REC_DETECT_IDLE_EN		0x070
+#define QSERDES_TX_BIST_PATTERN1			0x074
+#define QSERDES_TX_BIST_PATTERN2			0x078
+#define QSERDES_TX_BIST_PATTERN3			0x07c
+#define QSERDES_TX_BIST_PATTERN4			0x080
+#define QSERDES_TX_BIST_PATTERN5			0x084
+#define QSERDES_TX_BIST_PATTERN6			0x088
+#define QSERDES_TX_BIST_PATTERN7			0x08c
+#define QSERDES_TX_BIST_PATTERN8			0x090
+#define QSERDES_TX_LANE_MODE				0x094
+#define QSERDES_TX_IDAC_CAL_LANE_MODE			0x098
+#define QSERDES_TX_IDAC_CAL_LANE_MODE_CONFIGURATION	0x09c
+#define QSERDES_TX_ATB_SEL1				0x0a0
+#define QSERDES_TX_ATB_SEL2				0x0a4
+#define QSERDES_TX_RCV_DETECT_LVL			0x0a8
+#define QSERDES_TX_RCV_DETECT_LVL_2			0x0ac
+#define QSERDES_TX_PRBS_SEED1				0x0b0
+#define QSERDES_TX_PRBS_SEED2				0x0b4
+#define QSERDES_TX_PRBS_SEED3				0x0b8
+#define QSERDES_TX_PRBS_SEED4				0x0bc
+#define QSERDES_TX_RESET_GEN				0x0c0
+#define QSERDES_TX_RESET_GEN_MUXES			0x0c4
+#define QSERDES_TX_TRAN_DRVR_EMP_EN			0x0c8
+#define QSERDES_TX_TX_INTERFACE_MODE			0x0cc
+#define QSERDES_TX_PWM_CTRL				0x0d0
+#define QSERDES_TX_PWM_ENCODED_OR_DATA			0x0d4
+#define QSERDES_TX_PWM_GEAR_1_DIVIDER_BAND2		0x0d8
+#define QSERDES_TX_PWM_GEAR_2_DIVIDER_BAND2		0x0dc
+#define QSERDES_TX_PWM_GEAR_3_DIVIDER_BAND2		0x0e0
+#define QSERDES_TX_PWM_GEAR_4_DIVIDER_BAND2		0x0e4
+#define QSERDES_TX_PWM_GEAR_1_DIVIDER_BAND0_1		0x0e8
+#define QSERDES_TX_PWM_GEAR_2_DIVIDER_BAND0_1		0x0ec
+#define QSERDES_TX_PWM_GEAR_3_DIVIDER_BAND0_1		0x0f0
+#define QSERDES_TX_PWM_GEAR_4_DIVIDER_BAND0_1		0x0f4
+#define QSERDES_TX_VMODE_CTRL1				0x0f8
+#define QSERDES_TX_VMODE_CTRL2				0x0fc
+#define QSERDES_TX_TX_ALOG_INTF_OBSV_CNTL		0x100
+#define QSERDES_TX_BIST_STATUS				0x104
+#define QSERDES_TX_BIST_ERROR_COUNT1			0x108
+#define QSERDES_TX_BIST_ERROR_COUNT2			0x10c
+#define QSERDES_TX_TX_ALOG_INTF_OBSV			0x110
+
+/* Only for QMP V2 PHY - RX registers */
+#define QSERDES_RX_UCDR_FO_GAIN_HALF			0x000
+#define QSERDES_RX_UCDR_FO_GAIN_QUARTER			0x004
+#define QSERDES_RX_UCDR_FO_GAIN_EIGHTH			0x008
+#define QSERDES_RX_UCDR_FO_GAIN				0x00c
+#define QSERDES_RX_UCDR_SO_GAIN_HALF			0x010
+#define QSERDES_RX_UCDR_SO_GAIN_QUARTER			0x014
+#define QSERDES_RX_UCDR_SO_GAIN_EIGHTH			0x018
+#define QSERDES_RX_UCDR_SO_GAIN				0x01c
+#define QSERDES_RX_UCDR_SVS_FO_GAIN_HALF		0x020
+#define QSERDES_RX_UCDR_SVS_FO_GAIN_QUARTER		0x024
+#define QSERDES_RX_UCDR_SVS_FO_GAIN_EIGHTH		0x028
+#define QSERDES_RX_UCDR_SVS_FO_GAIN			0x02c
+#define QSERDES_RX_UCDR_SVS_SO_GAIN_HALF		0x030
+#define QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER		0x034
+#define QSERDES_RX_UCDR_SVS_SO_GAIN_EIGHTH		0x038
+#define QSERDES_RX_UCDR_SVS_SO_GAIN			0x03c
+#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN		0x040
+#define QSERDES_RX_UCDR_FD_GAIN				0x044
+#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE	0x048
+#define QSERDES_RX_UCDR_FO_TO_SO_DELAY			0x04c
+#define QSERDES_RX_UCDR_FASTLOCK_COUNT_LOW		0x050
+#define QSERDES_RX_UCDR_FASTLOCK_COUNT_HIGH		0x054
+#define QSERDES_RX_UCDR_MODULATE			0x058
+#define QSERDES_RX_UCDR_PI_CONTROLS			0x05c
+#define QSERDES_RX_RBIST_CONTROL			0x060
+#define QSERDES_RX_AUX_CONTROL				0x064
+#define QSERDES_RX_AUX_DATA_TCOARSE			0x068
+#define QSERDES_RX_AUX_DATA_TFINE_LSB			0x06c
+#define QSERDES_RX_AUX_DATA_TFINE_MSB			0x070
+#define QSERDES_RX_RCLK_AUXDATA_SEL			0x074
+#define QSERDES_RX_AC_JTAG_ENABLE			0x078
+#define QSERDES_RX_AC_JTAG_INITP			0x07c
+#define QSERDES_RX_AC_JTAG_INITN			0x080
+#define QSERDES_RX_AC_JTAG_LVL				0x084
+#define QSERDES_RX_AC_JTAG_MODE				0x088
+#define QSERDES_RX_AC_JTAG_RESET			0x08c
+#define QSERDES_RX_RX_TERM_BW				0x090
+#define QSERDES_RX_RX_RCVR_IQ_EN			0x094
+#define QSERDES_RX_RX_IDAC_I_DC_OFFSETS			0x098
+#define QSERDES_RX_RX_IDAC_IBAR_DC_OFFSETS		0x09c
+#define QSERDES_RX_RX_IDAC_Q_DC_OFFSETS			0x0a0
+#define QSERDES_RX_RX_IDAC_QBAR_DC_OFFSETS		0x0a4
+#define QSERDES_RX_RX_IDAC_A_DC_OFFSETS			0x0a8
+#define QSERDES_RX_RX_IDAC_ABAR_DC_OFFSETS		0x0ac
+#define QSERDES_RX_RX_IDAC_EN				0x0b0
+#define QSERDES_RX_RX_IDAC_ENABLES			0x0b4
+#define QSERDES_RX_RX_IDAC_SIGN				0x0b8
+#define QSERDES_RX_RX_HIGHZ_HIGHRATE			0x0bc
+#define QSERDES_RX_RX_TERM_AC_BYPASS_DC_COUPLE_OFFSET	0x0c0
+#define QSERDES_RX_RX_EQ_GAIN1_LSB			0x0c4
+#define QSERDES_RX_RX_EQ_GAIN1_MSB			0x0c8
+#define QSERDES_RX_RX_EQ_GAIN2_LSB			0x0cc
+#define QSERDES_RX_RX_EQ_GAIN2_MSB			0x0d0
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL1		0x0d4
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2		0x0d8
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3		0x0dc
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4		0x0e0
+#define QSERDES_RX_RX_IDAC_CAL_CONFIGURATION		0x0e4
+#define QSERDES_RX_RX_IDAC_TSETTLE_LOW			0x0e8
+#define QSERDES_RX_RX_IDAC_TSETTLE_HIGH			0x0ec
+#define QSERDES_RX_RX_IDAC_ENDSAMP_LOW			0x0f0
+#define QSERDES_RX_RX_IDAC_ENDSAMP_HIGH			0x0f4
+#define QSERDES_RX_RX_IDAC_MIDPOINT_LOW			0x0f8
+#define QSERDES_RX_RX_IDAC_MIDPOINT_HIGH		0x0fc
+#define QSERDES_RX_RX_EQ_OFFSET_LSB			0x100
+#define QSERDES_RX_RX_EQ_OFFSET_MSB			0x104
+#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x108
+#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x10c
+#define QSERDES_RX_SIGDET_ENABLES			0x110
+#define QSERDES_RX_SIGDET_CNTRL				0x114
+#define QSERDES_RX_SIGDET_LVL				0x118
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL		0x11c
+#define QSERDES_RX_RX_BAND				0x120
+#define QSERDES_RX_CDR_FREEZE_UP_DN			0x124
+#define QSERDES_RX_CDR_RESET_OVERRIDE			0x128
+#define QSERDES_RX_RX_INTERFACE_MODE			0x12c
+#define QSERDES_RX_JITTER_GEN_MODE			0x130
+#define QSERDES_RX_BUJ_AMP				0x134
+#define QSERDES_RX_SJ_AMP1				0x138
+#define QSERDES_RX_SJ_AMP2				0x13c
+#define QSERDES_RX_SJ_PER1				0x140
+#define QSERDES_RX_SJ_PER2				0x144
+#define QSERDES_RX_BUJ_STEP_FREQ1			0x148
+#define QSERDES_RX_BUJ_STEP_FREQ2			0x14c
+#define QSERDES_RX_PPM_OFFSET1				0x150
+#define QSERDES_RX_PPM_OFFSET2				0x154
+#define QSERDES_RX_SIGN_PPM_PERIOD1			0x158
+#define QSERDES_RX_SIGN_PPM_PERIOD2			0x15c
+#define QSERDES_RX_SSC_CTRL				0x160
+#define QSERDES_RX_SSC_COUNT1				0x164
+#define QSERDES_RX_SSC_COUNT2				0x168
+#define QSERDES_RX_RX_ALOG_INTF_OBSV_CNTL		0x16c
+#define QSERDES_RX_RX_PWM_ENABLE_AND_DATA		0x170
+#define QSERDES_RX_RX_PWM_GEAR1_TIMEOUT_COUNT		0x174
+#define QSERDES_RX_RX_PWM_GEAR2_TIMEOUT_COUNT		0x178
+#define QSERDES_RX_RX_PWM_GEAR3_TIMEOUT_COUNT		0x17c
+#define QSERDES_RX_RX_PWM_GEAR4_TIMEOUT_COUNT		0x180
+#define QSERDES_RX_PI_CTRL1				0x184
+#define QSERDES_RX_PI_CTRL2				0x188
+#define QSERDES_RX_PI_QUAD				0x18c
+#define QSERDES_RX_IDATA1				0x190
+#define QSERDES_RX_IDATA2				0x194
+#define QSERDES_RX_AUX_DATA1				0x198
+#define QSERDES_RX_AUX_DATA2				0x19c
+#define QSERDES_RX_AC_JTAG_OUTP				0x1a0
+#define QSERDES_RX_AC_JTAG_OUTN				0x1a4
+#define QSERDES_RX_RX_SIGDET				0x1a8
+#define QSERDES_RX_RX_VDCOFF				0x1ac
+#define QSERDES_RX_IDAC_CAL_ON				0x1b0
+#define QSERDES_RX_IDAC_STATUS_I			0x1b4
+#define QSERDES_RX_IDAC_STATUS_IBAR			0x1b8
+#define QSERDES_RX_IDAC_STATUS_Q			0x1bc
+#define QSERDES_RX_IDAC_STATUS_QBAR			0x1c0
+#define QSERDES_RX_IDAC_STATUS_A			0x1c4
+#define QSERDES_RX_IDAC_STATUS_ABAR			0x1c8
+#define QSERDES_RX_CALST_STATUS_I			0x1cc
+#define QSERDES_RX_CALST_STATUS_Q			0x1d0
+#define QSERDES_RX_CALST_STATUS_A			0x1d4
+#define QSERDES_RX_RX_ALOG_INTF_OBSV			0x1d8
+#define QSERDES_RX_READ_EQCODE				0x1dc
+#define QSERDES_RX_READ_OFFSETCODE			0x1e0
+#define QSERDES_RX_IA_ERROR_COUNTER_LOW			0x1e4
+#define QSERDES_RX_IA_ERROR_COUNTER_HIGH		0x1e8
+
+#endif
diff --git a/drivers/phy/qcom/phy-qcom-qmp-ufs.c b/drivers/phy/qcom/phy-qcom-qmp-ufs.c
new file mode 100644
index 00000000000..8908a34df54
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-ufs.c
@@ -0,0 +1,1116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2023-2024 Linaro Limited
+ * Authors:
+ * - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+ * - Neil Armstrong <neil.armstrong@linaro.org>
+ *
+ * Based on Linux driver
+ */
+
+#include <clk.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <dm/devres.h>
+#include <generic-phy.h>
+#include <malloc.h>
+#include <reset.h>
+
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/ioport.h>
+
+#include "phy-qcom-qmp.h"
+#include "phy-qcom-qmp-pcs-ufs-v2.h"
+#include "phy-qcom-qmp-pcs-ufs-v3.h"
+#include "phy-qcom-qmp-pcs-ufs-v4.h"
+#include "phy-qcom-qmp-pcs-ufs-v5.h"
+#include "phy-qcom-qmp-pcs-ufs-v6.h"
+
+#include "phy-qcom-qmp-qserdes-com-v4.h"
+#include "phy-qcom-qmp-qserdes-com-v6.h"
+#include "phy-qcom-qmp-qserdes-txrx-v4.h"
+#include "phy-qcom-qmp-qserdes-txrx-ufs-v6.h"
+
+/* QPHY_SW_RESET bit */
+#define SW_RESET				BIT(0)
+/* QPHY_POWER_DOWN_CONTROL */
+#define SW_PWRDN				BIT(0)
+/* QPHY_START_CONTROL bits */
+#define SERDES_START				BIT(0)
+#define PCS_START				BIT(1)
+/* QPHY_PCS_READY_STATUS bit */
+#define PCS_READY				BIT(0)
+
+#define PHY_INIT_COMPLETE_TIMEOUT		(200 * 10000)
+
+struct qmp_ufs_init_tbl {
+	unsigned int offset;
+	unsigned int val;
+	/*
+	 * mask of lanes for which this register is written
+	 * for cases when second lane needs different values
+	 */
+	u8 lane_mask;
+};
+
+#define QMP_PHY_INIT_CFG(o, v)		\
+	{				\
+		.offset = o,		\
+		.val = v,		\
+		.lane_mask = 0xff,	\
+	}
+
+#define QMP_PHY_INIT_CFG_LANE(o, v, l)	\
+	{				\
+		.offset = o,		\
+		.val = v,		\
+		.lane_mask = l,		\
+	}
+
+/* set of registers with offsets different per-PHY */
+enum qphy_reg_layout {
+	/* PCS registers */
+	QPHY_SW_RESET,
+	QPHY_START_CTRL,
+	QPHY_PCS_READY_STATUS,
+	QPHY_PCS_POWER_DOWN_CONTROL,
+	/* Keep last to ensure regs_layout arrays are properly initialized */
+	QPHY_LAYOUT_SIZE
+};
+
+static const unsigned int ufsphy_v2_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_START_CTRL]		= QPHY_V2_PCS_UFS_PHY_START,
+	[QPHY_PCS_READY_STATUS]		= QPHY_V2_PCS_UFS_READY_STATUS,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V2_PCS_UFS_POWER_DOWN_CONTROL,
+};
+
+static const unsigned int ufsphy_v3_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_START_CTRL]		= QPHY_V3_PCS_UFS_PHY_START,
+	[QPHY_PCS_READY_STATUS]		= QPHY_V3_PCS_UFS_READY_STATUS,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V3_PCS_UFS_POWER_DOWN_CONTROL,
+};
+
+static const unsigned int ufsphy_v4_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_START_CTRL]		= QPHY_V4_PCS_UFS_PHY_START,
+	[QPHY_PCS_READY_STATUS]		= QPHY_V4_PCS_UFS_READY_STATUS,
+	[QPHY_SW_RESET]			= QPHY_V4_PCS_UFS_SW_RESET,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL,
+};
+
+static const unsigned int ufsphy_v6_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_START_CTRL]		= QPHY_V6_PCS_UFS_PHY_START,
+	[QPHY_PCS_READY_STATUS]		= QPHY_V6_PCS_UFS_READY_STATUS,
+	[QPHY_SW_RESET]			= QPHY_V6_PCS_UFS_SW_RESET,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V6_PCS_UFS_POWER_DOWN_CONTROL,
+};
+
+static const struct qmp_ufs_init_tbl sdm845_ufsphy_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+};
+
+static const struct qmp_ufs_init_tbl sdm845_ufsphy_hs_b_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_ufs_init_tbl sdm845_ufsphy_tx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
+static const struct qmp_ufs_init_tbl sdm845_ufsphy_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59),
+};
+
+static const struct qmp_ufs_init_tbl sdm845_ufsphy_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2, 0x6e),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SYM_RESYNC_CTRL, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL1, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_MIN_HIBERN8_TIME, 0x9a),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_ufs_init_tbl sm8150_ufsphy_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+};
+
+static const struct qmp_ufs_init_tbl sm8150_ufsphy_hs_b_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_ufs_init_tbl sm8150_ufsphy_tx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_ufs_init_tbl sm8150_ufsphy_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
+};
+
+static const struct qmp_ufs_init_tbl sm8150_ufsphy_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_ufs_init_tbl sm8150_ufsphy_hs_g4_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x10),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a),
+};
+
+static const struct qmp_ufs_init_tbl sm8250_ufsphy_hs_g4_tx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xe5),
+};
+
+static const struct qmp_ufs_init_tbl sm8250_ufsphy_hs_g4_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x81),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x6f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x2c),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x6d),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x6d),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xed),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x3c),
+};
+
+static const struct qmp_ufs_init_tbl sm8550_ufsphy_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07),
+};
+
+static const struct qmp_ufs_init_tbl sm8550_ufsphy_hs_b_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_ufs_init_tbl sm8550_ufsphy_tx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c),
+};
+
+static const struct qmp_ufs_init_tbl sm8550_ufsphy_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
+
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6, 0x60),
+
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B3, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B6, 0x60),
+
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B3, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B4, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B5, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02),
+
+};
+
+static const struct qmp_ufs_init_tbl sm8550_ufsphy_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4f),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e),
+};
+
+static const struct qmp_ufs_init_tbl sm8650_ufsphy_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO_MODE1, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IETRIM, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IPTRIM, 0x17),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07),
+};
+
+static const struct qmp_ufs_init_tbl sm8650_ufsphy_tx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+};
+
+static const struct qmp_ufs_init_tbl sm8650_ufsphy_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x3e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xce),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xce),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B2, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B4, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6, 0x60),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B3, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B6, 0x60),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B3, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B4, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B5, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B0, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B1, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B2, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B3, 0xb9),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B4, 0x4f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_SATURATION, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CTRL1, 0x94),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_RX_TERM_BW_CTRL0, 0xfa),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL, 0x30),
+};
+
+static const struct qmp_ufs_init_tbl sm8650_ufsphy_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PCS_CTRL1, 0xc1),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x68),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S4, 0x0e),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S5, 0x12),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S6, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S7, 0x19),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x05),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x05),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4d),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e),
+};
+
+struct qmp_ufs_offsets {
+	u16 serdes;
+	u16 pcs;
+	u16 tx;
+	u16 rx;
+	/* for PHYs with >= 2 lanes */
+	u16 tx2;
+	u16 rx2;
+};
+
+struct qmp_ufs_cfg_tbls {
+	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
+	const struct qmp_ufs_init_tbl *serdes;
+	int serdes_num;
+	const struct qmp_ufs_init_tbl *tx;
+	int tx_num;
+	const struct qmp_ufs_init_tbl *rx;
+	int rx_num;
+	const struct qmp_ufs_init_tbl *pcs;
+	int pcs_num;
+};
+
+/* struct qmp_ufs_cfg - per-PHY initialization config */
+struct qmp_ufs_cfg {
+	int lanes;
+
+	const struct qmp_ufs_offsets *offsets;
+
+	/* Main init sequence for PHY blocks - serdes, tx, rx, pcs */
+	const struct qmp_ufs_cfg_tbls tbls;
+	/* Additional sequence for HS Series B */
+	const struct qmp_ufs_cfg_tbls tbls_hs_b;
+	/* Additional sequence for HS G4 */
+	const struct qmp_ufs_cfg_tbls tbls_hs_g4;
+
+	/* clock ids to be requested */
+	const char * const *clk_list;
+	int num_clks;
+	/* regulators to be requested */
+	const char * const *vreg_list;
+	int num_vregs;
+	/* resets to be requested */
+	const char * const *reset_list;
+	int num_resets;
+
+	/* array of registers with different offsets */
+	const unsigned int *regs;
+
+	/* true, if PCS block has no separate SW_RESET register */
+	bool no_pcs_sw_reset;
+};
+
+struct qmp_ufs_priv {
+	struct phy *phy;
+
+	void __iomem *serdes;
+	void __iomem *pcs;
+	void __iomem *pcs_misc;
+	void __iomem *tx;
+	void __iomem *rx;
+	void __iomem *tx2;
+	void __iomem *rx2;
+
+	struct clk *clks;
+	unsigned int clk_count;
+
+	struct reset_ctl *resets;
+	unsigned int reset_count;
+
+	const struct qmp_ufs_cfg *cfg;
+
+	struct udevice *dev;
+
+	u32 mode;
+	u32 submode;
+};
+
+static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
+{
+	u32 reg;
+
+	reg = readl(base + offset);
+	reg |= val;
+	writel(reg, base + offset);
+
+	/* ensure that above write is through */
+	readl(base + offset);
+}
+
+static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
+{
+	u32 reg;
+
+	reg = readl(base + offset);
+	reg &= ~val;
+	writel(reg, base + offset);
+
+	/* ensure that above write is through */
+	readl(base + offset);
+}
+
+/* list of clocks required by phy */
+static const char * const sdm845_ufs_phy_clk_l[] = {
+	"ref", "ref_aux",
+};
+
+/* list of regulators */
+static const char * const qmp_ufs_vreg_l[] = {
+	"vdda-phy", "vdda-pll",
+};
+
+/* list of resets */
+static const char * const qmp_ufs_reset_l[] = {
+	"ufsphy",
+};
+
+static const struct qmp_ufs_offsets qmp_ufs_offsets = {
+	.serdes		= 0,
+	.pcs		= 0xc00,
+	.tx		= 0x400,
+	.rx		= 0x600,
+	.tx2		= 0x800,
+	.rx2		= 0xa00,
+};
+
+static const struct qmp_ufs_offsets qmp_ufs_offsets_v6 = {
+	.serdes		= 0,
+	.pcs		= 0x0400,
+	.tx		= 0x1000,
+	.rx		= 0x1200,
+	.tx2		= 0x1800,
+	.rx2		= 0x1a00,
+};
+
+static const struct qmp_ufs_cfg sdm845_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.offsets		= &qmp_ufs_offsets,
+
+	.tbls = {
+		.serdes		= sdm845_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sdm845_ufsphy_serdes),
+		.tx		= sdm845_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sdm845_ufsphy_tx),
+		.rx		= sdm845_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sdm845_ufsphy_rx),
+		.pcs		= sdm845_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sdm845_ufsphy_pcs),
+	},
+	.tbls_hs_b = {
+		.serdes		= sdm845_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sdm845_ufsphy_hs_b_serdes),
+	},
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_ufs_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_ufs_vreg_l),
+	.regs			= ufsphy_v3_regs_layout,
+
+	.no_pcs_sw_reset	= true,
+};
+
+static const struct qmp_ufs_cfg sm8250_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.offsets		= &qmp_ufs_offsets,
+
+	.tbls = {
+		.serdes		= sm8150_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_serdes),
+		.tx		= sm8150_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sm8150_ufsphy_tx),
+		.rx		= sm8150_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sm8150_ufsphy_rx),
+		.pcs		= sm8150_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_pcs),
+	},
+	.tbls_hs_b = {
+		.serdes		= sm8150_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes),
+	},
+	.tbls_hs_g4 = {
+		.tx		= sm8250_ufsphy_hs_g4_tx,
+		.tx_num		= ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx),
+		.rx		= sm8250_ufsphy_hs_g4_rx,
+		.rx_num		= ARRAY_SIZE(sm8250_ufsphy_hs_g4_rx),
+		.pcs		= sm8150_ufsphy_hs_g4_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs),
+	},
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_ufs_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_ufs_vreg_l),
+	.reset_list		= qmp_ufs_reset_l,
+	.num_resets		= ARRAY_SIZE(qmp_ufs_reset_l),
+	.regs			= ufsphy_v4_regs_layout,
+
+	.no_pcs_sw_reset	= false,
+};
+
+static const struct qmp_ufs_cfg sm8550_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.offsets		= &qmp_ufs_offsets_v6,
+
+	.tbls = {
+		.serdes		= sm8550_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8550_ufsphy_serdes),
+		.tx		= sm8550_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sm8550_ufsphy_tx),
+		.rx		= sm8550_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sm8550_ufsphy_rx),
+		.pcs		= sm8550_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8550_ufsphy_pcs),
+	},
+	.tbls_hs_b = {
+		.serdes		= sm8550_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes),
+	},
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_ufs_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_ufs_vreg_l),
+	.regs			= ufsphy_v6_regs_layout,
+
+	.no_pcs_sw_reset	= false,
+};
+
+static const struct qmp_ufs_cfg sm8650_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.offsets		= &qmp_ufs_offsets_v6,
+
+	.tbls = {
+		.serdes		= sm8650_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8650_ufsphy_serdes),
+		.tx		= sm8650_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sm8650_ufsphy_tx),
+		.rx		= sm8650_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sm8650_ufsphy_rx),
+		.pcs		= sm8650_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8650_ufsphy_pcs),
+	},
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_ufs_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_ufs_vreg_l),
+	.regs			= ufsphy_v6_regs_layout,
+
+	.no_pcs_sw_reset	= false,
+};
+
+static void qmp_ufs_configure_lane(void __iomem *base,
+					const struct qmp_ufs_init_tbl tbl[],
+					int num,
+					u8 lane_mask)
+{
+	int i;
+	const struct qmp_ufs_init_tbl *t = tbl;
+
+	if (!t)
+		return;
+
+	for (i = 0; i < num; i++, t++) {
+		if (!(t->lane_mask & lane_mask))
+			continue;
+
+		writel(t->val, base + t->offset);
+	}
+}
+
+static void qmp_ufs_configure(void __iomem *base,
+				   const struct qmp_ufs_init_tbl tbl[],
+				   int num)
+{
+	qmp_ufs_configure_lane(base, tbl, num, 0xff);
+}
+
+static void qmp_ufs_serdes_init(struct qmp_ufs_priv *qmp, const struct qmp_ufs_cfg_tbls *tbls)
+{
+	void __iomem *serdes = qmp->serdes;
+
+	qmp_ufs_configure(serdes, tbls->serdes, tbls->serdes_num);
+}
+
+static void qmp_ufs_lanes_init(struct qmp_ufs_priv *qmp, const struct qmp_ufs_cfg_tbls *tbls)
+{
+	const struct qmp_ufs_cfg *cfg = qmp->cfg;
+	void __iomem *tx = qmp->tx;
+	void __iomem *rx = qmp->rx;
+
+	qmp_ufs_configure_lane(tx, tbls->tx, tbls->tx_num, 1);
+	qmp_ufs_configure_lane(rx, tbls->rx, tbls->rx_num, 1);
+
+	if (cfg->lanes >= 2) {
+		qmp_ufs_configure_lane(qmp->tx2, tbls->tx, tbls->tx_num, 2);
+		qmp_ufs_configure_lane(qmp->rx2, tbls->rx, tbls->rx_num, 2);
+	}
+}
+
+static void qmp_ufs_pcs_init(struct qmp_ufs_priv *qmp, const struct qmp_ufs_cfg_tbls *tbls)
+{
+	void __iomem *pcs = qmp->pcs;
+
+	qmp_ufs_configure(pcs, tbls->pcs, tbls->pcs_num);
+}
+
+static void qmp_ufs_init_registers(struct qmp_ufs_priv *qmp, const struct qmp_ufs_cfg *cfg)
+{
+	/* We support 'PHY_MODE_UFS_HS_B' mode & 'UFS_HS_G3' submode for now. */
+	qmp_ufs_serdes_init(qmp, &cfg->tbls);
+	qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b);
+	qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_g4);
+	qmp_ufs_lanes_init(qmp, &cfg->tbls);
+	qmp_ufs_pcs_init(qmp, &cfg->tbls);
+}
+
+static int qmp_ufs_do_reset(struct qmp_ufs_priv *qmp)
+{
+	int i, ret;
+
+	for (i = 0; i < qmp->reset_count; i++) {
+		ret = reset_assert(&qmp->resets[i]);
+		if (ret)
+			return ret;
+	}
+
+	udelay(10);
+
+	for (i = 0; i < qmp->reset_count; i++) {
+		ret = reset_deassert(&qmp->resets[i]);
+		if (ret)
+			return ret;
+	}
+
+	udelay(50);
+
+	return 0;
+}
+
+static int qmp_ufs_power_on(struct phy *phy)
+{
+	struct qmp_ufs_priv *qmp = dev_get_priv(phy->dev);
+	const struct qmp_ufs_cfg *cfg = qmp->cfg;
+	void __iomem *pcs = qmp->pcs;
+	void __iomem *status;
+	unsigned int val;
+	int ret;
+
+	/* Power down PHY */
+	qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
+
+	qmp_ufs_init_registers(qmp, cfg);
+
+	if (cfg->no_pcs_sw_reset) {
+		ret = qmp_ufs_do_reset(qmp);
+		if (ret) {
+			dev_err(phy->dev, "qmp reset failed\n");
+			return ret;
+		}
+	}
+
+	/* Pull PHY out of reset state */
+	if (!cfg->no_pcs_sw_reset)
+		qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
+	/* start SerDes */
+	qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], SERDES_START);
+
+	status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+	ret = readl_poll_timeout(status, val, (val & PCS_READY), PHY_INIT_COMPLETE_TIMEOUT);
+	if (ret) {
+		dev_err(phy->dev, "phy initialization timed-out\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int qmp_ufs_power_off(struct phy *phy)
+{
+	struct qmp_ufs_priv *qmp = dev_get_priv(phy->dev);
+	const struct qmp_ufs_cfg *cfg = qmp->cfg;
+
+	/* PHY reset */
+	qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
+	/* stop SerDes and Phy-Coding-Sublayer */
+	qphy_clrbits(qmp->pcs, cfg->regs[QPHY_START_CTRL],
+			SERDES_START | PCS_START);
+
+	/* Put PHY into POWER DOWN state: active low */
+	qphy_clrbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+			SW_PWRDN);
+
+	clk_release_all(qmp->clks, qmp->clk_count);
+
+	return 0;
+}
+
+static int qmp_ufs_vreg_init(struct udevice *dev, struct qmp_ufs_priv *qmp)
+{
+	/* TOFIX: Add regulator support, but they should be voted at boot time already */
+
+	return 0;
+}
+
+static int qmp_ufs_reset_init(struct udevice *dev, struct qmp_ufs_priv *qmp)
+{
+	const struct qmp_ufs_cfg *cfg = qmp->cfg;
+	int num = cfg->num_resets;
+	int i, ret;
+
+	qmp->reset_count = 0;
+	qmp->resets = devm_kcalloc(dev, num, sizeof(*qmp->resets), GFP_KERNEL);
+	if (!qmp->resets)
+		return -ENOMEM;
+
+	for (i = 0; i < num; i++) {
+		ret = reset_get_by_index(dev, i, &qmp->resets[i]);
+		if (ret < 0) {
+			dev_err(dev, "failed to get reset %d\n", i);
+			goto reset_get_err;
+		}
+
+		++qmp->reset_count;
+	}
+
+	return 0;
+
+reset_get_err:
+	ret = reset_release_all(qmp->resets, qmp->reset_count);
+	if (ret)
+		dev_warn(dev, "failed to disable all resets\n");
+
+	return ret;
+}
+
+static int qmp_ufs_clk_init(struct udevice *dev, struct qmp_ufs_priv *qmp)
+{
+	const struct qmp_ufs_cfg *cfg = qmp->cfg;
+	int num = cfg->num_clks;
+	int i, ret;
+
+	qmp->clk_count = 0;
+	qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
+	if (!qmp->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < num; i++) {
+		ret = clk_get_by_index(dev, i, &qmp->clks[i]);
+		if (ret < 0)
+			goto clk_get_err;
+
+		ret = clk_enable(&qmp->clks[i]);
+		if (ret && ret != -ENOSYS) {
+			dev_err(dev, "failed to enable clock %d\n", i);
+			goto clk_get_err;
+		}
+
+		++qmp->clk_count;
+	}
+
+	return 0;
+
+clk_get_err:
+	ret = clk_release_all(qmp->clks, qmp->clk_count);
+	if (ret)
+		dev_warn(dev, "failed to disable all clocks\n");
+
+	return ret;
+}
+
+static int qmp_ufs_probe_generic_child(struct udevice *dev,
+				       ofnode child)
+{
+	struct qmp_ufs_priv *qmp = dev_get_priv(dev);
+	const struct qmp_ufs_cfg *cfg = qmp->cfg;
+	struct resource res;
+	int ret;
+
+	/*
+	 * Get memory resources for the PHY:
+	 * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+	 * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
+	 * For single lane PHYs: pcs_misc (optional) -> 3.
+	 */
+	ret = ofnode_read_resource(child, 0, &res);
+	if (ret) {
+		dev_err(dev, "can't get reg property of child %s\n",
+			ofnode_get_name(child));
+		return ret;
+	}
+
+	qmp->tx = (void __iomem *)res.start;
+
+	ret = ofnode_read_resource(child, 1, &res);
+	if (ret) {
+		dev_err(dev, "can't get reg property of child %s\n",
+			ofnode_get_name(child));
+		return ret;
+	}
+
+	qmp->rx = (void __iomem *)res.start;
+
+	ret = ofnode_read_resource(child, 2, &res);
+	if (ret) {
+		dev_err(dev, "can't get reg property of child %s\n",
+			ofnode_get_name(child));
+		return ret;
+	}
+
+	qmp->pcs = (void __iomem *)res.start;
+
+	if (cfg->lanes >= 2) {
+		ret = ofnode_read_resource(child, 3, &res);
+		if (ret) {
+			dev_err(dev, "can't get reg property of child %s\n",
+				ofnode_get_name(child));
+			return ret;
+		}
+
+		qmp->tx2 = (void __iomem *)res.start;
+
+		ret = ofnode_read_resource(child, 4, &res);
+		if (ret) {
+			dev_err(dev, "can't get reg property of child %s\n",
+				ofnode_get_name(child));
+			return ret;
+		}
+
+		qmp->rx2 = (void __iomem *)res.start;
+
+		ret = ofnode_read_resource(child, 5, &res);
+		if (ret)
+			qmp->pcs_misc = NULL;
+	} else {
+		ret = ofnode_read_resource(child, 3, &res);
+		if (ret)
+			qmp->pcs_misc = NULL;
+	}
+
+	return 0;
+}
+
+static int qmp_ufs_probe_dt_children(struct udevice *dev)
+{
+	int ret;
+	ofnode child;
+
+	ofnode_for_each_subnode(child, dev_ofnode(dev)) {
+		ret = qmp_ufs_probe_generic_child(dev, child);
+		if (ret) {
+			dev_err(dev, "Cannot parse child %s:%d\n",
+				ofnode_get_name(child), ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int qmp_ufs_probe(struct udevice *dev)
+{
+	struct qmp_ufs_priv *qmp = dev_get_priv(dev);
+	int ret;
+
+	qmp->serdes = (void __iomem *)dev_read_addr(dev);
+	if (IS_ERR(qmp->serdes))
+		return PTR_ERR(qmp->serdes);
+
+	qmp->cfg = (const struct qmp_ufs_cfg *)dev_get_driver_data(dev);
+	if (!qmp->cfg)
+		return -EINVAL;
+
+	ret = qmp_ufs_clk_init(dev, qmp);
+	if (ret) {
+		dev_err(dev, "failed to get UFS clks\n");
+		return ret;
+	}
+
+	ret = qmp_ufs_vreg_init(dev, qmp);
+	if (ret) {
+		dev_err(dev, "failed to get UFS voltage regulators\n");
+		return ret;
+	}
+
+	if (qmp->cfg->no_pcs_sw_reset) {
+		ret = qmp_ufs_reset_init(dev, qmp);
+		if (ret) {
+			dev_err(dev, "failed to get UFS resets\n");
+			return ret;
+		}
+	}
+
+	qmp->dev = dev;
+
+	if (ofnode_get_child_count(dev_ofnode(dev))) {
+		ret = qmp_ufs_probe_dt_children(dev);
+		if (ret) {
+			dev_err(dev, "failed to get UFS dt regs\n");
+			return ret;
+		}
+	} else {
+		const struct qmp_ufs_offsets *offs = qmp->cfg->offsets;
+		struct resource res;
+
+		if (!qmp->cfg->offsets) {
+			dev_err(dev, "missing UFS offsets\n");
+			return -EINVAL;
+		}
+
+		ret = ofnode_read_resource(dev_ofnode(dev), 0, &res);
+		if (ret) {
+			dev_err(dev, "can't get reg property\n");
+			return ret;
+		}
+
+		qmp->serdes = (void __iomem *)res.start + offs->serdes;
+		qmp->pcs = (void __iomem *)res.start + offs->pcs;
+		qmp->tx = (void __iomem *)res.start + offs->tx;
+		qmp->rx = (void __iomem *)res.start + offs->rx;
+
+		if (qmp->cfg->lanes >= 2) {
+			qmp->tx2 = (void __iomem *)res.start + offs->tx2;
+			qmp->rx2 = (void __iomem *)res.start + offs->rx2;
+		}
+	}
+
+	return 0;
+}
+
+static struct phy_ops qmp_ufs_ops = {
+	.power_on = qmp_ufs_power_on,
+	.power_off = qmp_ufs_power_off,
+};
+
+static const struct udevice_id qmp_ufs_ids[] = {
+	{ .compatible = "qcom,sdm845-qmp-ufs-phy", .data = (ulong)&sdm845_ufsphy_cfg },
+	{ .compatible = "qcom,sm8250-qmp-ufs-phy", .data = (ulong)&sm8250_ufsphy_cfg },
+	{ .compatible = "qcom,sm8550-qmp-ufs-phy", .data = (ulong)&sm8550_ufsphy_cfg },
+	{ .compatible = "qcom,sm8650-qmp-ufs-phy", .data = (ulong)&sm8650_ufsphy_cfg },
+	{ }
+};
+
+U_BOOT_DRIVER(qcom_qmp_ufs) = {
+	.name		= "qcom-qmp-ufs",
+	.id		= UCLASS_PHY,
+	.of_match	= qmp_ufs_ids,
+	.ops		= &qmp_ufs_ops,
+	.probe		= qmp_ufs_probe,
+	.priv_auto	= sizeof(struct qmp_ufs_priv),
+};
diff --git a/drivers/phy/qcom/phy-qcom-qmp.h b/drivers/phy/qcom/phy-qcom-qmp.h
new file mode 100644
index 00000000000..99f4d447caf
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_H_
+#define QCOM_PHY_QMP_H_
+
+#include "phy-qcom-qmp-qserdes-com.h"
+#include "phy-qcom-qmp-qserdes-txrx.h"
+
+#include "phy-qcom-qmp-qserdes-com-v3.h"
+#include "phy-qcom-qmp-qserdes-txrx-v3.h"
+
+#include "phy-qcom-qmp-qserdes-pll.h"
+
+#include "phy-qcom-qmp-pcs-v2.h"
+
+#include "phy-qcom-qmp-pcs-v3.h"
+
+/* Only for QMP V3 & V4 PHY - DP COM registers */
+#define QPHY_V3_DP_COM_PHY_MODE_CTRL			0x00
+#define QPHY_V3_DP_COM_SW_RESET				0x04
+#define QPHY_V3_DP_COM_POWER_DOWN_CTRL			0x08
+#define QPHY_V3_DP_COM_SWI_CTRL				0x0c
+#define QPHY_V3_DP_COM_TYPEC_CTRL			0x10
+#define QPHY_V3_DP_COM_TYPEC_PWRDN_CTRL			0x14
+#define QPHY_V3_DP_COM_RESET_OVRD_CTRL			0x1c
+
+/* QSERDES V3 COM bits */
+# define QSERDES_V3_COM_BIAS_EN				0x0001
+# define QSERDES_V3_COM_BIAS_EN_MUX			0x0002
+# define QSERDES_V3_COM_CLKBUF_R_EN			0x0004
+# define QSERDES_V3_COM_CLKBUF_L_EN			0x0008
+# define QSERDES_V3_COM_EN_SYSCLK_TX_SEL		0x0010
+# define QSERDES_V3_COM_CLKBUF_RX_DRIVE_L		0x0020
+# define QSERDES_V3_COM_CLKBUF_RX_DRIVE_R		0x0040
+
+/* QSERDES V3 TX bits */
+# define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK		0x001f
+# define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN		0x0020
+# define DP_PHY_TXn_TX_DRV_LVL_MASK			0x001f
+# define DP_PHY_TXn_TX_DRV_LVL_MUX_EN			0x0020
+
+/* QMP PHY - DP PHY registers */
+#define QSERDES_DP_PHY_REVISION_ID0			0x000
+#define QSERDES_DP_PHY_REVISION_ID1			0x004
+#define QSERDES_DP_PHY_REVISION_ID2			0x008
+#define QSERDES_DP_PHY_REVISION_ID3			0x00c
+#define QSERDES_DP_PHY_CFG				0x010
+#define QSERDES_DP_PHY_PD_CTL				0x018
+# define DP_PHY_PD_CTL_PWRDN				0x001
+# define DP_PHY_PD_CTL_PSR_PWRDN			0x002
+# define DP_PHY_PD_CTL_AUX_PWRDN			0x004
+# define DP_PHY_PD_CTL_LANE_0_1_PWRDN			0x008
+# define DP_PHY_PD_CTL_LANE_2_3_PWRDN			0x010
+# define DP_PHY_PD_CTL_PLL_PWRDN			0x020
+# define DP_PHY_PD_CTL_DP_CLAMP_EN			0x040
+#define QSERDES_DP_PHY_MODE				0x01c
+#define QSERDES_DP_PHY_AUX_CFG0				0x020
+#define QSERDES_DP_PHY_AUX_CFG1				0x024
+#define QSERDES_DP_PHY_AUX_CFG2				0x028
+#define QSERDES_DP_PHY_AUX_CFG3				0x02c
+#define QSERDES_DP_PHY_AUX_CFG4				0x030
+#define QSERDES_DP_PHY_AUX_CFG5				0x034
+#define QSERDES_DP_PHY_AUX_CFG6				0x038
+#define QSERDES_DP_PHY_AUX_CFG7				0x03c
+#define QSERDES_DP_PHY_AUX_CFG8				0x040
+#define QSERDES_DP_PHY_AUX_CFG9				0x044
+
+/* Only for QMP V3 PHY - DP PHY registers */
+#define QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK		0x048
+# define PHY_AUX_STOP_ERR_MASK				0x01
+# define PHY_AUX_DEC_ERR_MASK				0x02
+# define PHY_AUX_SYNC_ERR_MASK				0x04
+# define PHY_AUX_ALIGN_ERR_MASK				0x08
+# define PHY_AUX_REQ_ERR_MASK				0x10
+
+#define QSERDES_V3_DP_PHY_AUX_INTERRUPT_CLEAR		0x04c
+#define QSERDES_V3_DP_PHY_AUX_BIST_CFG			0x050
+
+#define QSERDES_V3_DP_PHY_VCO_DIV			0x064
+#define QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL		0x06c
+#define QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL		0x088
+
+#define QSERDES_V3_DP_PHY_SPARE0			0x0ac
+#define DP_PHY_SPARE0_MASK				0x0f
+#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT		0x04(0x0004)
+
+#define QSERDES_V3_DP_PHY_STATUS			0x0c0
+
+/* Only for QMP V4 PHY - DP PHY registers */
+#define QSERDES_V4_DP_PHY_CFG_1				0x014
+#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK		0x054
+#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_CLEAR		0x058
+#define QSERDES_V4_DP_PHY_VCO_DIV			0x070
+#define QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL		0x078
+#define QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL		0x09c
+#define QSERDES_V4_DP_PHY_SPARE0			0x0c8
+#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_STATUS		0x0d8
+#define QSERDES_V4_DP_PHY_STATUS			0x0dc
+
+/* Only for QMP V4 PHY - PCS_MISC registers */
+#define QPHY_V4_PCS_MISC_TYPEC_CTRL			0x00
+#define QPHY_V4_PCS_MISC_TYPEC_PWRDN_CTRL		0x04
+#define QPHY_V4_PCS_MISC_PCS_MISC_CONFIG1		0x08
+#define QPHY_V4_PCS_MISC_CLAMP_ENABLE			0x0c
+#define QPHY_V4_PCS_MISC_TYPEC_STATUS			0x10
+#define QPHY_V4_PCS_MISC_PLACEHOLDER_STATUS		0x14
+
+/* Only for QMP V6 PHY - DP PHY registers */
+#define QSERDES_V6_DP_PHY_AUX_INTERRUPT_STATUS		0x0e0
+#define QSERDES_V6_DP_PHY_STATUS			0x0e4
+
+#endif
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c
index 114f2602b28..46a5b6637c9 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c
@@ -749,6 +749,7 @@ U_BOOT_DRIVER(mt7622_pinctrl) = {
 	.id = UCLASS_PINCTRL,
 	.of_match = mt7622_pctrl_match,
 	.ops = &mtk_pinctrl_ops,
+	.bind = mtk_pinctrl_common_bind,
 	.probe = mtk_pinctrl_mt7622_probe,
 	.priv_auto	= sizeof(struct mtk_pinctrl_priv),
 };
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7623.c b/drivers/pinctrl/mediatek/pinctrl-mt7623.c
index 2703e6f754c..55e49a790e4 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt7623.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7623.c
@@ -1410,6 +1410,7 @@ U_BOOT_DRIVER(mt7623_pinctrl) = {
 	.id = UCLASS_PINCTRL,
 	.of_match = mt7623_pctrl_match,
 	.ops = &mtk_pinctrl_ops,
+	.bind = mtk_pinctrl_common_bind,
 	.probe = mtk_pinctrl_mt7623_probe,
 	.priv_auto	= sizeof(struct mtk_pinctrl_priv),
 };
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7629.c b/drivers/pinctrl/mediatek/pinctrl-mt7629.c
index 45d4def316d..3b82423c145 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt7629.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7629.c
@@ -413,6 +413,7 @@ U_BOOT_DRIVER(mt7629_pinctrl) = {
 	.id = UCLASS_PINCTRL,
 	.of_match = mt7629_pctrl_match,
 	.ops = &mtk_pinctrl_ops,
+	.bind = mtk_pinctrl_common_bind,
 	.probe = mtk_pinctrl_mt7629_probe,
 	.priv_auto	= sizeof(struct mtk_pinctrl_priv),
 };
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7981.c b/drivers/pinctrl/mediatek/pinctrl-mt7981.c
index 4bc4abe6518..047e37bc9cd 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c
@@ -1048,6 +1048,7 @@ U_BOOT_DRIVER(mt7981_pinctrl) = {
 	.id = UCLASS_PINCTRL,
 	.of_match = mt7981_pctrl_match,
 	.ops = &mtk_pinctrl_ops,
+	.bind = mtk_pinctrl_common_bind,
 	.probe = mtk_pinctrl_mt7981_probe,
 	.priv_auto = sizeof(struct mtk_pinctrl_priv),
 	.flags = DM_FLAG_PRE_RELOC,
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7986.c b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
index 819d64488f3..bf8cd037535 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
@@ -773,6 +773,7 @@ U_BOOT_DRIVER(mt7986_pinctrl) = {
 	.id = UCLASS_PINCTRL,
 	.of_match = mt7986_pctrl_match,
 	.ops = &mtk_pinctrl_ops,
+	.bind = mtk_pinctrl_common_bind,
 	.probe = mtk_pinctrl_mt7986_probe,
 	.priv_auto = sizeof(struct mtk_pinctrl_priv),
 };
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7988.c b/drivers/pinctrl/mediatek/pinctrl-mt7988.c
index 03a38e83dfa..1f384e86f4e 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt7988.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7988.c
@@ -1269,6 +1269,7 @@ U_BOOT_DRIVER(mt7988_pinctrl) = {
 	.id = UCLASS_PINCTRL,
 	.of_match = mt7988_pctrl_match,
 	.ops = &mtk_pinctrl_ops,
+	.bind = mtk_pinctrl_common_bind,
 	.probe = mtk_pinctrl_mt7988_probe,
 	.priv_auto = sizeof(struct mtk_pinctrl_priv),
 };
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8512.c b/drivers/pinctrl/mediatek/pinctrl-mt8512.c
index bc5fb83ac68..5a8dd4ddd40 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8512.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8512.c
@@ -382,6 +382,7 @@ U_BOOT_DRIVER(mt8512_pinctrl) = {
 	.id = UCLASS_PINCTRL,
 	.of_match = mt8512_pctrl_match,
 	.ops = &mtk_pinctrl_ops,
+	.bind = mtk_pinctrl_common_bind,
 	.probe = mtk_pinctrl_mt8512_probe,
 	.priv_auto	= sizeof(struct mtk_pinctrl_priv),
 };
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8516.c b/drivers/pinctrl/mediatek/pinctrl-mt8516.c
index 7487d6f0605..9c25066fc2d 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8516.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8516.c
@@ -388,6 +388,7 @@ U_BOOT_DRIVER(mt8516_pinctrl) = {
 	.id = UCLASS_PINCTRL,
 	.of_match = mt8516_pctrl_match,
 	.ops = &mtk_pinctrl_ops,
+	.bind = mtk_pinctrl_common_bind,
 	.probe = mtk_pinctrl_mt8516_probe,
 	.priv_auto	= sizeof(struct mtk_pinctrl_priv),
 };
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8518.c b/drivers/pinctrl/mediatek/pinctrl-mt8518.c
index 66fcfdff144..333184a6bb2 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8518.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8518.c
@@ -408,6 +408,7 @@ U_BOOT_DRIVER(mt8518_pinctrl) = {
 	.id = UCLASS_PINCTRL,
 	.of_match = mt8518_pctrl_match,
 	.ops = &mtk_pinctrl_ops,
+	.bind = mtk_pinctrl_common_bind,
 	.probe = mtk_pinctrl_mt8518_probe,
 	.priv_auto	= sizeof(struct mtk_pinctrl_priv),
 };
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index ede3959c94f..a3662d46bde 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -791,11 +791,20 @@ bind:
 }
 #endif
 
+int mtk_pinctrl_common_bind(struct udevice *dev)
+{
+#if CONFIG_IS_ENABLED(DM_GPIO) || \
+    (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO))
+	return mtk_gpiochip_register(dev);
+#else
+	return 0;
+#endif
+}
+
 int mtk_pinctrl_common_probe(struct udevice *dev,
 			     const struct mtk_pinctrl_soc *soc)
 {
 	struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
-	int ret = 0;
 	u32 i = 0;
 	fdt_addr_t addr;
 	u32 base_calc = soc->base_calc;
@@ -813,10 +822,5 @@ int mtk_pinctrl_common_probe(struct udevice *dev,
 		priv->base[i] = (void __iomem *)addr;
 	}
 
-#if CONFIG_IS_ENABLED(DM_GPIO) || \
-    (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO))
-	ret = mtk_gpiochip_register(dev);
-#endif
-
-	return ret;
+	return 0;
 }
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
index c948b808434..15ab3c1bf07 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
@@ -241,6 +241,7 @@ extern const struct pinctrl_ops mtk_pinctrl_ops;
 /* A common read-modify-write helper for MediaTek chips */
 void mtk_rmw(struct udevice *dev, u32 reg, u32 mask, u32 set);
 void mtk_i_rmw(struct udevice *dev, u8 i, u32 reg, u32 mask, u32 set);
+int mtk_pinctrl_common_bind(struct udevice *dev);
 int mtk_pinctrl_common_probe(struct udevice *dev,
 			     const struct mtk_pinctrl_soc *soc);
 
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index b326fa85140..4f93a34281d 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -55,6 +55,13 @@ config PINCTRL_QCOM_SM6115
 	  Say Y here to enable support for pinctrl on the Snapdragon SM6115 SoC,
 	  as well as the associated GPIO driver.
 
+config PINCTRL_QCOM_SM8150
+	bool "Qualcomm SM8150 GCC"
+	select PINCTRL_QCOM
+	help
+	  Say Y here to enable support for pinctrl on the Snapdragon SM8150 SoC,
+	  as well as the associated GPIO driver.
+
 config PINCTRL_QCOM_SM8250
 	bool "Qualcomm SM8250 GCC"
 	select PINCTRL_QCOM
@@ -74,6 +81,7 @@ config PINCTRL_QCOM_SM8650
 	select PINCTRL_QCOM
 	help
 	  Say Y here to enable support for pinctrl on the Snapdragon SM8650 SoC,
+	  as well as the associated GPIO driver.
 
 endmenu
 
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 4f1d96787be..43d0dd29222 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_PINCTRL_QCOM_QCM2290) += pinctrl-qcm2290.o
 obj-$(CONFIG_PINCTRL_QCOM_QCS404) += pinctrl-qcs404.o
 obj-$(CONFIG_PINCTRL_QCOM_SDM845) += pinctrl-sdm845.o
 obj-$(CONFIG_PINCTRL_QCOM_SM6115) += pinctrl-sm6115.o
+obj-$(CONFIG_PINCTRL_QCOM_SM8150) += pinctrl-sm8150.o
 obj-$(CONFIG_PINCTRL_QCOM_SM8250) += pinctrl-sm8250.o
 obj-$(CONFIG_PINCTRL_QCOM_SM8550) += pinctrl-sm8550.o
 obj-$(CONFIG_PINCTRL_QCOM_SM8650) += pinctrl-sm8650.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8150.c b/drivers/pinctrl/qcom/pinctrl-sm8150.c
new file mode 100644
index 00000000000..1fb2ffb9597
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm8150.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Qualcomm SM8150 pinctrl and GPIO driver
+ *
+ * Volodymyr Babchuk <volodymyr_babchuk@epam.com>
+ * Copyright (c) 2024 EPAM Systems.
+ *
+ * (C) Copyright 2024 Julius Lehmann <lehmanju@devpi.de>
+ *
+ * Based on similar U-Boot drivers. Constants were taken from the Linux driver
+ */
+
+#include <dm.h>
+
+#include "pinctrl-qcom.h"
+
+#define WEST	0x100000
+#define EAST	0x500000
+#define NORTH	0x900000
+#define SOUTH	0xd00000
+
+#define MAX_PIN_NAME_LEN 32
+static char pin_name[MAX_PIN_NAME_LEN] __section(".data");
+
+static const struct pinctrl_function msm_pinctrl_functions[] = {
+	{ "qup2", 1 },
+	{ "gpio", 0 },
+};
+
+static const unsigned int sm8150_pin_offsets[] = {
+	[0]   = SOUTH, [1]   = SOUTH, [2]   = SOUTH, [3]   = SOUTH,
+	[4]   = SOUTH, [5]   = SOUTH, [6]   = SOUTH, [7]   = SOUTH,
+	[8]   = NORTH, [9]   = NORTH, [10]  = NORTH, [11]  = NORTH,
+	[12]  = NORTH, [13]  = NORTH, [14]  = NORTH, [15]  = NORTH,
+	[16]  = NORTH, [17]  = NORTH, [18]  = NORTH, [19]  = NORTH,
+	[20]  = NORTH, [21]  = EAST,  [22]  = EAST,  [23]  = EAST,
+	[24]  = EAST,  [25]  = EAST,  [26]  = EAST,  [27]  = EAST,
+	[28]  = EAST,  [29]  = EAST,  [30]  = EAST,  [31]  = NORTH,
+	[32]  = NORTH, [33]  = NORTH, [34]  = NORTH, [35]  = NORTH,
+	[36]  = NORTH, [37]  = NORTH, [38]  = SOUTH, [39]  = NORTH,
+	[40]  = NORTH, [41]  = NORTH, [42]  = NORTH, [43]  = EAST,
+	[44]  = EAST,  [45]  = EAST,  [46]  = EAST,  [47]  = EAST,
+	[48]  = EAST,  [49]  = EAST,  [50]  = EAST,  [51]  = SOUTH,
+	[52]  = SOUTH, [53]  = SOUTH, [54]  = SOUTH, [55]  = SOUTH,
+	[56]  = SOUTH, [57]  = SOUTH, [58]  = SOUTH, [59]  = SOUTH,
+	[60]  = SOUTH, [61]  = SOUTH, [62]  = SOUTH, [63]  = SOUTH,
+	[64]  = SOUTH, [65]  = SOUTH, [66]  = SOUTH, [67]  = SOUTH,
+	[68]  = SOUTH, [69]  = SOUTH, [70]  = SOUTH, [71]  = SOUTH,
+	[72]  = SOUTH, [73]  = SOUTH, [74]  = SOUTH, [75]  = SOUTH,
+	[76]  = SOUTH, [77]  = SOUTH, [78]  = SOUTH, [79]  = SOUTH,
+	[80]  = SOUTH, [81]  = SOUTH, [82]  = SOUTH, [83]  = NORTH,
+	[84]  = NORTH, [85]  = NORTH, [86]  = NORTH, [87]  = EAST,
+	[88]  = NORTH, [89]  = NORTH, [90]  = NORTH, [91]  = NORTH,
+	[92]  = NORTH, [93]  = NORTH, [94]  = NORTH, [95]  = NORTH,
+	[96]  = NORTH, [97]  = NORTH, [98]  = SOUTH, [99]  = SOUTH,
+	[100] = SOUTH, [101] = SOUTH, [102] = NORTH, [103] = NORTH,
+	[104] = NORTH, [105] = WEST,  [106] = WEST,  [107] = WEST,
+	[108] = WEST,  [109] = WEST,  [110] = WEST,  [111] = WEST,
+	[112] = WEST,  [113] = WEST,  [114] = SOUTH, [115] = SOUTH,
+	[116] = SOUTH, [117] = SOUTH, [118] = SOUTH, [119] = SOUTH,
+	[120] = SOUTH, [121] = SOUTH, [122] = SOUTH, [123] = SOUTH,
+	[124] = SOUTH, [125] = WEST,  [126] = SOUTH, [127] = SOUTH,
+	[128] = SOUTH, [129] = SOUTH, [130] = SOUTH, [131] = SOUTH,
+	[132] = SOUTH, [133] = SOUTH, [134] = SOUTH, [135] = SOUTH,
+	[136] = SOUTH, [137] = SOUTH, [138] = SOUTH, [139] = SOUTH,
+	[140] = SOUTH, [141] = SOUTH, [142] = SOUTH, [143] = SOUTH,
+	[144] = SOUTH, [145] = SOUTH, [146] = SOUTH, [147] = SOUTH,
+	[148] = SOUTH, [149] = SOUTH, [150] = SOUTH, [151] = SOUTH,
+	[152] = SOUTH, [153] = SOUTH, [154] = SOUTH, [155] = WEST,
+	[156] = WEST,  [157] = WEST,  [158] = WEST,  [159] = WEST,
+	[160] = WEST,  [161] = WEST,  [162] = WEST,  [163] = WEST,
+	[164] = WEST,  [165] = WEST,  [166] = WEST,  [167] = WEST,
+	[168] = WEST,  [169] = NORTH, [170] = NORTH, [171] = NORTH,
+	[172] = NORTH, [173] = NORTH, [174] = NORTH,
+};
+
+#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv)	\
+	{						\
+		.name = pg_name,			\
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+	}
+
+#define UFS_RESET(pg_name, offset)        \
+	{                                 \
+		.name = pg_name,	  \
+		.ctl_reg = offset,	  \
+		.io_reg = offset + 0x04,  \
+		.pull_bit = 3,		  \
+		.drv_bit = 0,             \
+		.oe_bit = -1,             \
+		.in_bit = -1,             \
+		.out_bit = 0,             \
+	}
+
+static const struct msm_special_pin_data msm_special_pins_data[] = {
+	[0] = UFS_RESET("ufs_reset", SOUTH + 0xb6000),
+	[1] = SDC_QDSD_PINGROUP("sdc2_clk", NORTH + 0xb2000, 14, 6),
+	[2] = SDC_QDSD_PINGROUP("sdc2_cmd", NORTH + 0xb2000, 11, 3),
+	[3] = SDC_QDSD_PINGROUP("sdc2_data", NORTH + 0xb2000, 9, 0),
+};
+
+static const char *sm8150_get_function_name(struct udevice *dev,
+					    unsigned int selector)
+{
+	return msm_pinctrl_functions[selector].name;
+}
+
+static const char *sm8150_get_pin_name(struct udevice *dev,
+				       unsigned int selector)
+{
+	if (selector >= 175 && selector <= 178)
+		snprintf(pin_name, MAX_PIN_NAME_LEN,
+			 msm_special_pins_data[selector - 175].name);
+	else
+		snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector);
+
+	return pin_name;
+}
+
+static unsigned int sm8150_get_function_mux(__maybe_unused unsigned int pin,
+					    unsigned int selector)
+{
+	return msm_pinctrl_functions[selector].val;
+}
+
+static struct msm_pinctrl_data sm8150_data = {
+	.pin_data = {
+		.pin_offsets = sm8150_pin_offsets,
+		.pin_count = 179,
+		.special_pins_start = 175,
+		.special_pins_data = msm_special_pins_data,
+	},
+	.functions_count = ARRAY_SIZE(msm_pinctrl_functions),
+	.get_function_name = sm8150_get_function_name,
+	.get_function_mux = sm8150_get_function_mux,
+	.get_pin_name = sm8150_get_pin_name,
+};
+
+static const struct udevice_id msm_pinctrl_ids[] = {
+	{ .compatible = "qcom,sm8150-pinctrl", .data = (ulong)&sm8150_data },
+	{ /* Sentinel */ }
+};
+
+U_BOOT_DRIVER(pinctrl_sm8150) = {
+	.name		= "pinctrl_sm8150",
+	.id		= UCLASS_NOP,
+	.of_match	= msm_pinctrl_ids,
+	.ops		= &msm_pinctrl_ops,
+	.bind		= msm_pinctrl_bind,
+};
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250.c b/drivers/pinctrl/qcom/pinctrl-sm8250.c
index dac24f11bc2..cab42fa64ed 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8250.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8250.c
@@ -18,8 +18,37 @@
 static char pin_name[MAX_PIN_NAME_LEN] __section(".data");
 
 static const struct pinctrl_function msm_pinctrl_functions[] = { { "qup12", 1 },
-								 { "gpio", 0 },
-								 { "sdc2_clk", 0 } };
+								 { "gpio", 0 }, };
+#define SDC_PINGROUP(pg_name, ctl, pull, drv)		\
+	{						\
+		.name = pg_name,			\
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+	}
+
+#define UFS_RESET(pg_name, offset)			\
+	{						\
+		.name = pg_name,			\
+		.ctl_reg = offset,			\
+		.io_reg = offset + 0x4,			\
+		.pull_bit = 3,				\
+		.drv_bit = 0,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = 0,				\
+	}
+
+static const struct msm_special_pin_data sm8250_special_pins_data[] = {
+	[0] = UFS_RESET("ufs_reset", SOUTH + 0xb8000),
+	[1] = SDC_PINGROUP("sdc2_clk", NORTH + 0xb7000, 14, 6),
+	[2] = SDC_PINGROUP("sdc2_cmd", NORTH + 0xb7000, 11, 3),
+	[3] = SDC_PINGROUP("sdc2_data", NORTH + 0xb7000, 9, 0),
+};
 
 static const unsigned int sm8250_pin_offsets[] = {
 	[0] = SOUTH,   [1] = SOUTH,   [2] = SOUTH,   [3] = SOUTH,   [4] = NORTH,   [5] = NORTH,
@@ -52,7 +81,6 @@ static const unsigned int sm8250_pin_offsets[] = {
 	[162] = WEST,  [163] = WEST,  [164] = WEST,  [165] = WEST,  [166] = WEST,  [167] = WEST,
 	[168] = WEST,  [169] = WEST,  [170] = WEST,  [171] = WEST,  [172] = WEST,  [173] = WEST,
 	[174] = WEST,  [175] = WEST,  [176] = WEST,  [177] = WEST,  [178] = WEST,  [179] = WEST,
-	[180] = 0,     [181] = 0,     [182] = 0,     [183] = 0,
 };
 
 static const char *sm8250_get_function_name(struct udevice *dev, unsigned int selector)
@@ -62,7 +90,12 @@ static const char *sm8250_get_function_name(struct udevice *dev, unsigned int se
 
 static const char *sm8250_get_pin_name(struct udevice *dev, unsigned int selector)
 {
-	snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector);
+	if (selector >= 180 && selector <= 183)
+		snprintf(pin_name, MAX_PIN_NAME_LEN,
+			 sm8250_special_pins_data[selector - 180].name);
+	else
+		snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector);
+
 	return pin_name;
 }
 
@@ -76,6 +109,7 @@ static struct msm_pinctrl_data sm8250_data = {
 		.pin_offsets = sm8250_pin_offsets,
 		.pin_count = ARRAY_SIZE(sm8250_pin_offsets),
 		.special_pins_start = 180,
+		.special_pins_data = sm8250_special_pins_data,
 	},
 	.functions_count = ARRAY_SIZE(msm_pinctrl_functions),
 	.get_function_name = sm8250_get_function_name,
diff --git a/drivers/power/pmic/da9063.c b/drivers/power/pmic/da9063.c
index 7bd3df39142..59c65702863 100644
--- a/drivers/power/pmic/da9063.c
+++ b/drivers/power/pmic/da9063.c
@@ -7,6 +7,9 @@
 #include <fdtdec.h>
 #include <errno.h>
 #include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/device_compat.h>
+#include <dm/lists.h>
 #include <i2c.h>
 #include <log.h>
 #include <linux/printk.h>
@@ -86,6 +89,7 @@ static int da9063_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
 static int da9063_bind(struct udevice *dev)
 {
 	ofnode regulators_node;
+	struct driver *drv;
 	int children;
 
 	regulators_node = dev_read_subnode(dev, "regulators");
@@ -101,8 +105,12 @@ static int da9063_bind(struct udevice *dev)
 	if (!children)
 		debug("%s: %s - no child found\n", __func__, dev->name);
 
-	/* Always return success for this device */
-	return 0;
+	drv = lists_driver_lookup_name("da9063-wdt");
+	if (!drv)
+		return 0;
+
+	return device_bind_with_driver_data(dev, drv, "da9063-wdt", dev->driver_data,
+					    dev_ofnode(dev), &dev);
 }
 
 static int da9063_probe(struct udevice *dev)
diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c
index 88a8525b3c4..decd0802c84 100644
--- a/drivers/power/regulator/regulator-uclass.c
+++ b/drivers/power/regulator/regulator-uclass.c
@@ -55,14 +55,16 @@ int regulator_set_value(struct udevice *dev, int uV)
 	struct dm_regulator_uclass_plat *uc_pdata;
 	int ret, old_uV = uV, is_enabled = 0;
 
+	if (!ops || !ops->set_value)
+		return -ENOSYS;
+
 	uc_pdata = dev_get_uclass_plat(dev);
 	if (uc_pdata->min_uV != -ENODATA && uV < uc_pdata->min_uV)
 		return -EINVAL;
 	if (uc_pdata->max_uV != -ENODATA && uV > uc_pdata->max_uV)
 		return -EINVAL;
-
-	if (!ops || !ops->set_value)
-		return -ENOSYS;
+	if (uV == -ENODATA)
+		return -EINVAL;
 
 	if (uc_pdata->ramp_delay) {
 		is_enabled = regulator_get_enable(dev);
@@ -85,14 +87,16 @@ int regulator_set_suspend_value(struct udevice *dev, int uV)
 	const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
 	struct dm_regulator_uclass_plat *uc_pdata;
 
+	if (!ops || !ops->set_suspend_value)
+		return -ENOSYS;
+
 	uc_pdata = dev_get_uclass_plat(dev);
 	if (uc_pdata->min_uV != -ENODATA && uV < uc_pdata->min_uV)
 		return -EINVAL;
 	if (uc_pdata->max_uV != -ENODATA && uV > uc_pdata->max_uV)
 		return -EINVAL;
-
-	if (!ops->set_suspend_value)
-		return -ENOSYS;
+	if (uV == -ENODATA)
+		return -EINVAL;
 
 	return ops->set_suspend_value(dev, uV);
 }
@@ -101,7 +105,7 @@ int regulator_get_suspend_value(struct udevice *dev)
 {
 	const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
 
-	if (!ops->get_suspend_value)
+	if (!ops || !ops->get_suspend_value)
 		return -ENOSYS;
 
 	return ops->get_suspend_value(dev);
@@ -136,14 +140,16 @@ int regulator_set_current(struct udevice *dev, int uA)
 	const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
 	struct dm_regulator_uclass_plat *uc_pdata;
 
+	if (!ops || !ops->set_current)
+		return -ENOSYS;
+
 	uc_pdata = dev_get_uclass_plat(dev);
 	if (uc_pdata->min_uA != -ENODATA && uA < uc_pdata->min_uA)
 		return -EINVAL;
 	if (uc_pdata->max_uA != -ENODATA && uA > uc_pdata->max_uA)
 		return -EINVAL;
-
-	if (!ops || !ops->set_current)
-		return -ENOSYS;
+	if (uA == -ENODATA)
+		return -EINVAL;
 
 	return ops->set_current(dev, uA);
 }
@@ -210,7 +216,7 @@ int regulator_set_suspend_enable(struct udevice *dev, bool enable)
 {
 	const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
 
-	if (!ops->set_suspend_enable)
+	if (!ops || !ops->set_suspend_enable)
 		return -ENOSYS;
 
 	return ops->set_suspend_enable(dev, enable);
@@ -220,7 +226,7 @@ int regulator_get_suspend_enable(struct udevice *dev)
 {
 	const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);
 
-	if (!ops->get_suspend_enable)
+	if (!ops || !ops->get_suspend_enable)
 		return -ENOSYS;
 
 	return ops->get_suspend_enable(dev);
@@ -299,7 +305,7 @@ int regulator_autoset(struct udevice *dev)
 	if (ret == -ENOSYS)
 		ret = 0;
 
-	if (!ret && uc_pdata->suspend_on) {
+	if (!ret && uc_pdata->suspend_on && uc_pdata->suspend_uV != -ENODATA) {
 		ret = regulator_set_suspend_value(dev, uc_pdata->suspend_uV);
 		if (ret == -ENOSYS)
 			ret = 0;
@@ -308,6 +314,11 @@ int regulator_autoset(struct udevice *dev)
 			return ret;
 	}
 
+	if (uc_pdata->force_off) {
+		ret = regulator_set_enable(dev, false);
+		goto out;
+	}
+
 	if (!uc_pdata->always_on && !uc_pdata->boot_on) {
 		ret = -EMEDIUMTYPE;
 		goto out;
@@ -334,17 +345,6 @@ out:
 	return ret;
 }
 
-int regulator_unset(struct udevice *dev)
-{
-	struct dm_regulator_uclass_plat *uc_pdata;
-
-	uc_pdata = dev_get_uclass_plat(dev);
-	if (uc_pdata && uc_pdata->force_off)
-		return regulator_set_enable(dev, false);
-
-	return -EMEDIUMTYPE;
-}
-
 static void regulator_show(struct udevice *dev, int ret)
 {
 	struct dm_regulator_uclass_plat *uc_pdata;
@@ -433,6 +433,8 @@ static int regulator_post_bind(struct udevice *dev)
 	const char *property = "regulator-name";
 
 	uc_pdata = dev_get_uclass_plat(dev);
+	uc_pdata->always_on = dev_read_bool(dev, "regulator-always-on");
+	uc_pdata->boot_on = dev_read_bool(dev, "regulator-boot-on");
 
 	/* Regulator's mandatory constraint */
 	uc_pdata->name = dev_read_string(dev, property);
@@ -444,13 +446,21 @@ static int regulator_post_bind(struct udevice *dev)
 			return -EINVAL;
 	}
 
-	if (regulator_name_is_unique(dev, uc_pdata->name))
-		return 0;
+	if (!regulator_name_is_unique(dev, uc_pdata->name)) {
+		debug("'%s' of dev: '%s', has nonunique value: '%s\n",
+		      property, dev->name, uc_pdata->name);
+		return -EINVAL;
+	}
 
-	debug("'%s' of dev: '%s', has nonunique value: '%s\n",
-	      property, dev->name, uc_pdata->name);
+	/*
+	 * In case the regulator has regulator-always-on or
+	 * regulator-boot-on DT property, trigger probe() to
+	 * configure its default state during startup.
+	 */
+	if (uc_pdata->always_on || uc_pdata->boot_on)
+		dev_or_flags(dev, DM_FLAG_PROBE_AFTER_BIND);
 
-	return -EINVAL;
+	return 0;
 }
 
 static int regulator_pre_probe(struct udevice *dev)
@@ -473,8 +483,6 @@ static int regulator_pre_probe(struct udevice *dev)
 						-ENODATA);
 	uc_pdata->max_uA = dev_read_u32_default(dev, "regulator-max-microamp",
 						-ENODATA);
-	uc_pdata->always_on = dev_read_bool(dev, "regulator-always-on");
-	uc_pdata->boot_on = dev_read_bool(dev, "regulator-boot-on");
 	uc_pdata->ramp_delay = dev_read_u32_default(dev, "regulator-ramp-delay",
 						    0);
 	uc_pdata->force_off = dev_read_bool(dev, "regulator-force-boot-off");
@@ -504,56 +512,18 @@ static int regulator_pre_probe(struct udevice *dev)
 	return 0;
 }
 
-int regulators_enable_boot_on(bool verbose)
+static int regulator_post_probe(struct udevice *dev)
 {
-	struct udevice *dev;
-	struct uclass *uc;
 	int ret;
 
-	ret = uclass_get(UCLASS_REGULATOR, &uc);
-	if (ret)
+	ret = regulator_autoset(dev);
+	if (ret && ret != -EMEDIUMTYPE && ret != -EALREADY && ret != ENOSYS)
 		return ret;
-	for (uclass_first_device(UCLASS_REGULATOR, &dev);
-	     dev;
-	     uclass_next_device(&dev)) {
-		ret = regulator_autoset(dev);
-		if (ret == -EMEDIUMTYPE || ret == -EALREADY) {
-			ret = 0;
-			continue;
-		}
-		if (verbose)
-			regulator_show(dev, ret);
-		if (ret == -ENOSYS)
-			ret = 0;
-	}
-
-	return ret;
-}
-
-int regulators_enable_boot_off(bool verbose)
-{
-	struct udevice *dev;
-	struct uclass *uc;
-	int ret;
 
-	ret = uclass_get(UCLASS_REGULATOR, &uc);
-	if (ret)
-		return ret;
-	for (uclass_first_device(UCLASS_REGULATOR, &dev);
-	     dev;
-	     uclass_next_device(&dev)) {
-		ret = regulator_unset(dev);
-		if (ret == -EMEDIUMTYPE) {
-			ret = 0;
-			continue;
-		}
-		if (verbose)
-			regulator_show(dev, ret);
-		if (ret == -ENOSYS)
-			ret = 0;
-	}
+	if (_DEBUG)
+		regulator_show(dev, ret);
 
-	return ret;
+	return 0;
 }
 
 UCLASS_DRIVER(regulator) = {
@@ -561,5 +531,6 @@ UCLASS_DRIVER(regulator) = {
 	.name		= "regulator",
 	.post_bind	= regulator_post_bind,
 	.pre_probe	= regulator_pre_probe,
+	.post_probe	= regulator_post_probe,
 	.per_device_plat_auto	= sizeof(struct dm_regulator_uclass_plat),
 };
diff --git a/drivers/power/regulator/rk8xx.c b/drivers/power/regulator/rk8xx.c
index 34e61511d88..375d06e3207 100644
--- a/drivers/power/regulator/rk8xx.c
+++ b/drivers/power/regulator/rk8xx.c
@@ -381,7 +381,7 @@ static int _buck_set_value(struct udevice *pmic, int buck, int uvolt)
 		val = ((uvolt - info->min_uv) / info->step_uv) + info->min_sel;
 
 	debug("%s: volt=%d, buck=%d, reg=0x%x, mask=0x%x, val=0x%x\n",
-	      __func__, uvolt, buck + 1, info->vsel_reg, mask, val);
+	      __func__, uvolt, buck, info->vsel_reg, mask, val);
 
 	if (priv->variant == RK816_ID) {
 		pmic_clrsetbits(pmic, info->vsel_reg, mask, val);
@@ -415,7 +415,7 @@ static int _buck_set_enable(struct udevice *pmic, int buck, bool enable)
 		break;
 	case RK806_ID:
 		value = RK806_POWER_EN_CLRSETBITS(buck % 4, enable);
-		en_reg = RK806_POWER_EN((buck + 1) / 4);
+		en_reg = RK806_POWER_EN(buck / 4);
 		ret = pmic_reg_write(pmic, en_reg, value);
 		break;
 	case RK808_ID:
@@ -470,7 +470,7 @@ static int _buck_set_suspend_value(struct udevice *pmic, int buck, int uvolt)
 		val = ((uvolt - info->min_uv) / info->step_uv) + info->min_sel;
 
 	debug("%s: volt=%d, buck=%d, reg=0x%x, mask=0x%x, val=0x%x\n",
-	      __func__, uvolt, buck + 1, info->vsel_sleep_reg, mask, val);
+	      __func__, uvolt, buck, info->vsel_sleep_reg, mask, val);
 
 	return pmic_clrsetbits(pmic, info->vsel_sleep_reg, mask, val);
 }
@@ -494,7 +494,7 @@ static int _buck_get_enable(struct udevice *pmic, int buck)
 		break;
 	case RK806_ID:
 		mask = BIT(buck % 4);
-		ret = pmic_reg_read(pmic, RK806_POWER_EN((buck + 1) / 4));
+		ret = pmic_reg_read(pmic, RK806_POWER_EN(buck / 4));
 		break;
 	case RK808_ID:
 	case RK818_ID:
@@ -539,12 +539,13 @@ static int _buck_set_suspend_enable(struct udevice *pmic, int buck, bool enable)
 		{
 			u8 reg;
 
-			if (buck + 1 >= 9) {
+			if (buck >= 8) {
+				/* BUCK9 and BUCK10 */
 				reg = RK806_POWER_SLP_EN1;
-				mask = BIT(buck + 1 - 3);
+				mask = BIT(buck - 2);
 			} else {
 				reg = RK806_POWER_SLP_EN0;
-				mask = BIT(buck + 1);
+				mask = BIT(buck);
 			}
 			ret = pmic_clrsetbits(pmic, reg, mask, enable ? mask : 0);
 		}
@@ -590,12 +591,13 @@ static int _buck_get_suspend_enable(struct udevice *pmic, int buck)
 		{
 			u8 reg;
 
-			if (buck + 1 >= 9) {
+			if (buck >= 8) {
+				/* BUCK9 and BUCK10 */
 				reg = RK806_POWER_SLP_EN1;
-				mask = BIT(buck + 1 - 3);
+				mask = BIT(buck - 2);
 			} else {
 				reg = RK806_POWER_SLP_EN0;
-				mask = BIT(buck + 1);
+				mask = BIT(buck);
 			}
 			val = pmic_reg_read(pmic, reg);
 		}
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
index a64d2dff68d..f7e357f24da 100644
--- a/drivers/ram/Kconfig
+++ b/drivers/ram/Kconfig
@@ -26,6 +26,15 @@ config TPL_RAM
 	  TPL, enable this option. It might provide a cleaner interface to
 	  setting up RAM (e.g. SDRAM / DDR) within TPL.
 
+config VPL_RAM
+	bool "Enable RAM support in VPL"
+	depends on RAM && VPL
+	help
+	  The RAM subsystem adds a small amount of overhead to the image.
+	  If this is acceptable and you have a need to use RAM drivers in
+	  VPL, enable this option. It might provide a cleaner interface to
+	  setting up RAM (e.g. SDRAM / DDR) within VPL.
+
 config STM32_SDRAM
 	bool "Enable STM32 SDRAM support"
 	depends on RAM
diff --git a/drivers/ram/k3-ddrss/lpddr4.c b/drivers/ram/k3-ddrss/lpddr4.c
index 11ef242a37b..9f9abfeca48 100644
--- a/drivers/ram/k3-ddrss/lpddr4.c
+++ b/drivers/ram/k3-ddrss/lpddr4.c
@@ -155,10 +155,11 @@ u32 lpddr4_start(const lpddr4_privatedata *pd)
 	u32 result = 0U;
 
 	result = lpddr4_startsf(pd);
-	if (result == (u32)0) {
+	if (result == (u32)0)
 		result = lpddr4_enablepiinitiator(pd);
+	if (result == (u32)0)
 		result = lpddr4_startsequencecontroller(pd);
-	}
+
 	return result;
 }
 
diff --git a/drivers/rtc/rv3028.c b/drivers/rtc/rv3028.c
index 9f63afc14a8..b14d2a246ff 100644
--- a/drivers/rtc/rv3028.c
+++ b/drivers/rtc/rv3028.c
@@ -12,6 +12,9 @@
 #include <dm.h>
 #include <i2c.h>
 #include <rtc.h>
+#include <dm/device_compat.h>
+#include <linux/delay.h>
+#include <power/regulator.h>
 
 #define RV3028_SEC			0x00
 #define RV3028_MIN			0x01
@@ -78,6 +81,12 @@
 
 #define RTC_RV3028_LEN			7
 
+#define VDD_START_TIME_US		200000
+
+struct rv3028_priv {
+	struct udevice *vdd;
+};
+
 static int rv3028_rtc_get(struct udevice *dev, struct rtc_time *tm)
 {
 	u8 regs[RTC_RV3028_LEN];
@@ -180,6 +189,28 @@ static int rv3028_rtc_write8(struct udevice *dev, unsigned int reg, int val)
 
 static int rv3028_probe(struct udevice *dev)
 {
+	struct rv3028_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
+		ret =  device_get_supply_regulator(dev, "vdd-supply", &priv->vdd);
+		if (ret && ret != -ENOENT) {
+			dev_err(dev, "Warning: cannot get VDD supply\n");
+			return ret;
+		}
+
+		if (priv->vdd) {
+			ret = regulator_set_enable_if_allowed(priv->vdd, true);
+			if (ret) {
+				dev_err(dev, "failed to enable vdd-supply\n");
+				return ret;
+			}
+
+			/* We must wait Tstart = 0.2s before access to I2C */
+			udelay(VDD_START_TIME_US);
+		}
+	}
+
 	i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS |
 				DM_I2C_CHIP_WR_ADDRESS);
 
@@ -205,4 +236,5 @@ U_BOOT_DRIVER(rtc_rv3028) = {
 	.probe	= rv3028_probe,
 	.of_match = rv3028_rtc_ids,
 	.ops	= &rv3028_rtc_ops,
+	.priv_auto	= sizeof(struct rv3028_priv),
 };
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3a1e5a6f287..8b27ad9a77e 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -539,6 +539,13 @@ config TPL_DEBUG_UART_BASE
 	help
 	  This is the base address of your UART for memory-mapped UARTs for TPL.
 
+config VPL_DEBUG_UART_BASE
+	hex "Base address of UART for VPL"
+	depends on VPL && DEBUG_UART
+	default DEBUG_UART_BASE
+	help
+	  This is the base address of your UART for memory-mapped UARTs for VPL.
+
 config DEBUG_UART_CLOCK
 	int "UART input clock"
 	depends on DEBUG_UART
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 6fcb5b523ac..07f9ac00e11 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -565,19 +565,19 @@ int ns16550_serial_of_to_plat(struct udevice *dev)
 	plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0);
 	plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1);
 
-	err = clk_get_by_index(dev, 0, &clk);
-	if (!err) {
-		err = clk_get_rate(&clk);
-		if (!IS_ERR_VALUE(err))
-			plat->clock = err;
-	} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
-		debug("ns16550 failed to get clock\n");
-		return err;
-	}
-
 	if (!plat->clock)
-		plat->clock = dev_read_u32_default(dev, "clock-frequency",
-						   CFG_SYS_NS16550_CLK);
+		plat->clock = dev_read_u32_default(dev, "clock-frequency", 0);
+	if (!plat->clock) {
+		err = clk_get_by_index(dev, 0, &clk);
+		if (!err) {
+			err = clk_get_rate(&clk);
+			if (!IS_ERR_VALUE(err))
+				plat->clock = err;
+		} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
+			debug("ns16550 failed to get clock\n");
+			return err;
+		}
+	}
 	if (!plat->clock)
 		plat->clock = CFG_SYS_NS16550_CLK;
 	if (!plat->clock) {
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index b264c52abbd..eeac1339c23 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -129,9 +129,6 @@ static int davinci_spi_read(struct davinci_spi_slave *ds, unsigned int len,
 	while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
 		;
 
-	/* preload the TX buffer to avoid clock starvation */
-	writel(data1_reg_val, &ds->regs->dat1);
-
 	/* keep reading 1 byte until only 1 byte left */
 	while ((len--) > 1)
 		*rxp++ = davinci_spi_xfer_data(ds, data1_reg_val);
@@ -159,12 +156,6 @@ static int davinci_spi_write(struct davinci_spi_slave *ds, unsigned int len,
 	while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
 		;
 
-	/* preload the TX buffer to avoid clock starvation */
-	if (len > 2) {
-		writel(data1_reg_val | *txp++, &ds->regs->dat1);
-		len--;
-	}
-
 	/* keep writing 1 byte until only 1 byte left */
 	while ((len--) > 1)
 		davinci_spi_xfer_data(ds, data1_reg_val | *txp++);
diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index 32b2c412068..ac7e469469a 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -965,6 +965,12 @@ int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
 	if (priv_dev->dev_ver <= DEV_VER_V2)
 		cdns3_wa1_tray_restore_cycle_bit(priv_dev, priv_ep);
 
+	/* Flush TRBs */
+	flush_dcache_range((unsigned long)priv_ep->trb_pool,
+			   (unsigned long)priv_ep->trb_pool +
+			   ROUND(sizeof(struct cdns3_trb) * priv_ep->num_trbs,
+				 CONFIG_SYS_CACHELINE_SIZE));
+
 	trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
 
 	/*
@@ -1153,6 +1159,13 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
 				priv_ep->endpoint.desc->bEndpointAddress);
 #endif
 
+		/* Invalidate TRBs */
+		invalidate_dcache_range((unsigned long)priv_ep->trb_pool,
+					(unsigned long)priv_ep->trb_pool +
+					ROUND(sizeof(struct cdns3_trb) *
+					      priv_ep->num_trbs,
+					      CONFIG_SYS_CACHELINE_SIZE));
+
 		if (!cdns3_request_handled(priv_ep, priv_req))
 			goto prepare_next_td;
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 4621a6fd5e6..1694ad03183 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -114,6 +114,15 @@ config USB_GADGET_DWC2_OTG
 	  driver to operate in Peripheral mode. This option requires
 	  USB_GADGET to be enabled.
 
+config USB_RENESAS_USBHS
+	bool "Renesas RCar USB2.0 HS controller (gadget mode)"
+	select USB_GADGET_DUALSPEED
+	help
+	  The Renesas Rcar USB 2.0 high-speed gadget controller
+	  integrated into Salvator and Kingfisher boards. Select this
+	  option if you want the driver to operate in Peripheral mode.
+	  This option requires USB_GADGET to be enabled.
+
 if USB_GADGET_DWC2_OTG
 
 config USB_GADGET_DWC2_OTG_PHY
@@ -323,7 +332,8 @@ config SPL_DFU
 	bool "Support DFU (Device Firmware Upgrade) in SPL"
 	select SPL_HASH
 	select SPL_DFU_NO_RESET
-	depends on SPL_RAM_SUPPORT
+	select SPL_RAM_SUPPORT
+	depends on DFU_OVER_USB
 	help
 	  This feature enables the DFU (Device Firmware Upgrade) in SPL with
 	  RAM memory device support. The ROM code will load and execute
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 6abcce0d9c7..da76b6524de 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o
 obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o
 obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o
 obj-$(CONFIG_USB_GADGET_MAX3420) += max3420_udc.o
+obj-$(CONFIG_USB_RENESAS_USBHS) += rcar/
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o
 obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
diff --git a/drivers/usb/gadget/rcar/Makefile b/drivers/usb/gadget/rcar/Makefile
new file mode 100644
index 00000000000..676f39c8e24
--- /dev/null
+++ b/drivers/usb/gadget/rcar/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_USB_RENESAS_USBHS) += \
+	common.o \
+	fifo.o \
+	mod.o \
+	mod_gadget.o \
+	pipe.o
diff --git a/drivers/usb/gadget/rcar/common.c b/drivers/usb/gadget/rcar/common.c
new file mode 100644
index 00000000000..2ba022a3f2c
--- /dev/null
+++ b/drivers/usb/gadget/rcar/common.c
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+
+#include <asm/io.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <linux/err.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <usb.h>
+
+#include "common.h"
+
+/*
+ *		image of renesas_usbhs
+ *
+ * ex) gadget case
+
+ * mod.c
+ * mod_gadget.c
+ * mod_host.c		pipe.c		fifo.c
+ *
+ *			+-------+	+-----------+
+ *			| pipe0 |------>| fifo pio  |
+ * +------------+	+-------+	+-----------+
+ * | mod_gadget |=====> | pipe1 |--+
+ * +------------+	+-------+  |	+-----------+
+ *			| pipe2 |  |  +-| fifo dma0 |
+ * +------------+	+-------+  |  |	+-----------+
+ * | mod_host   |	| pipe3 |<-|--+
+ * +------------+	+-------+  |	+-----------+
+ *			| ....  |  +--->| fifo dma1 |
+ *			| ....  |	+-----------+
+ */
+
+/*
+ *		common functions
+ */
+u16 usbhs_read(struct usbhs_priv *priv, u32 reg)
+{
+	return ioread16(priv->base + reg);
+}
+
+void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data)
+{
+	iowrite16(data, priv->base + reg);
+}
+
+void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data)
+{
+	u16 val = usbhs_read(priv, reg);
+
+	val &= ~mask;
+	val |= data & mask;
+
+	usbhs_write(priv, reg, val);
+}
+
+/*
+ *		syscfg functions
+ */
+static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable)
+{
+	usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0);
+}
+
+void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
+{
+	u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
+	u16 val  = DCFM | DRPD | HSE | USBE;
+
+	/*
+	 * if enable
+	 *
+	 * - select Host mode
+	 * - D+ Line/D- Line Pull-down
+	 */
+	usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
+}
+
+void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
+{
+	u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
+	u16 val  = HSE | USBE;
+
+	/*
+	 * if enable
+	 *
+	 * - select Function mode
+	 * - D+ Line Pull-up is disabled
+	 *      When D+ Line Pull-up is enabled,
+	 *      calling usbhs_sys_function_pullup(,1)
+	 */
+	usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
+}
+
+void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
+{
+	usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
+}
+
+void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
+{
+	usbhs_write(priv, TESTMODE, mode);
+}
+
+/*
+ *		frame functions
+ */
+int usbhs_frame_get_num(struct usbhs_priv *priv)
+{
+	return usbhs_read(priv, FRMNUM) & FRNM_MASK;
+}
+
+/*
+ *		usb request functions
+ */
+void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
+{
+	u16 val;
+
+	val = usbhs_read(priv, USBREQ);
+	req->bRequest		= (val >> 8) & 0xFF;
+	req->bRequestType	= (val >> 0) & 0xFF;
+
+	req->wValue	= cpu_to_le16(usbhs_read(priv, USBVAL));
+	req->wIndex	= cpu_to_le16(usbhs_read(priv, USBINDX));
+	req->wLength	= cpu_to_le16(usbhs_read(priv, USBLENG));
+}
+
+void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
+{
+	usbhs_write(priv, USBREQ,  (req->bRequest << 8) | req->bRequestType);
+	usbhs_write(priv, USBVAL,  le16_to_cpu(req->wValue));
+	usbhs_write(priv, USBINDX, le16_to_cpu(req->wIndex));
+	usbhs_write(priv, USBLENG, le16_to_cpu(req->wLength));
+
+	usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
+}
+
+/*
+ *		bus/vbus functions
+ */
+void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
+{
+	u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
+
+	if (status != USBRST) {
+		struct device *dev = usbhs_priv_to_dev(priv);
+		dev_err(dev, "usbhs should be reset\n");
+	}
+
+	usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
+}
+
+void usbhs_bus_send_reset(struct usbhs_priv *priv)
+{
+	usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
+}
+
+int usbhs_bus_get_speed(struct usbhs_priv *priv)
+{
+	u16 dvstctr = usbhs_read(priv, DVSTCTR);
+
+	switch (RHST & dvstctr) {
+	case RHST_LOW_SPEED:
+		return USB_SPEED_LOW;
+	case RHST_FULL_SPEED:
+		return USB_SPEED_FULL;
+	case RHST_HIGH_SPEED:
+		return USB_SPEED_HIGH;
+	}
+
+	return USB_SPEED_UNKNOWN;
+}
+
+static void usbhsc_bus_init(struct usbhs_priv *priv)
+{
+	usbhs_write(priv, DVSTCTR, 0);
+}
+
+/*
+ *		device configuration
+ */
+int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
+			   u16 upphub, u16 hubport, u16 speed)
+{
+	struct device *dev = usbhs_priv_to_dev(priv);
+	u16 usbspd = 0;
+	u32 reg = DEVADD0 + (2 * devnum);
+
+	if (devnum > 10) {
+		dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
+		return -EIO;
+	}
+
+	if (upphub > 0xA) {
+		dev_err(dev, "unsupported hub number %d\n", upphub);
+		return -EIO;
+	}
+
+	switch (speed) {
+	case USB_SPEED_LOW:
+		usbspd = USBSPD_SPEED_LOW;
+		break;
+	case USB_SPEED_FULL:
+		usbspd = USBSPD_SPEED_FULL;
+		break;
+	case USB_SPEED_HIGH:
+		usbspd = USBSPD_SPEED_HIGH;
+		break;
+	default:
+		dev_err(dev, "unsupported speed %d\n", speed);
+		return -EIO;
+	}
+
+	usbhs_write(priv, reg,	UPPHUB(upphub)	|
+				HUBPORT(hubport)|
+				USBSPD(usbspd));
+
+	return 0;
+}
+
+/*
+ *		interrupt functions
+ */
+void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit)
+{
+	u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0);
+
+	usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask);
+}
+
+/*
+ *		local functions
+ */
+static void usbhsc_set_buswait(struct usbhs_priv *priv)
+{
+	int wait = usbhs_get_dparam(priv, buswait_bwait);
+
+	/* set bus wait if platform have */
+	if (wait)
+		usbhs_bset(priv, BUSWAIT, 0x000F, wait);
+}
+
+/*
+ *		platform default param
+ */
+
+/* commonly used on newer SH-Mobile and R-Car SoCs */
+static struct renesas_usbhs_driver_pipe_config usbhsc_new_pipe[] = {
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x28, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x58, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x68, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x78, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x88, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x98, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xa8, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xb8, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xc8, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xd8, true),
+};
+
+#define LPSTS			0x102
+#define LPSTS_SUSPM		BIT(14)
+
+#define UGCTRL2			0x184
+#define UGCTRL2_RESERVED_3	BIT(0)
+#define UGCTRL2_USB0SEL_EHCI	0x10
+#define UGCTRL2_USB0SEL_HSUSB	0x20
+#define UGCTRL2_USB0SEL_OTG	0x30
+#define UGCTRL2_USB0SEL_MASK	0x30
+#define UGCTRL2_VBUSSEL		BIT(10)
+
+struct usbhs_priv_otg_data {
+	void __iomem		*base;
+	void __iomem		*phybase;
+
+	struct platform_device	usbhs_dev;
+	struct usbhs_priv	usbhs_priv;
+
+	struct phy		phy;
+};
+
+static int usbhs_rcar3_power_ctrl(struct usbhs_priv *priv, bool enable)
+{
+	if (enable) {
+		writel(UGCTRL2_USB0SEL_OTG | UGCTRL2_VBUSSEL | UGCTRL2_RESERVED_3,
+		       priv->base + UGCTRL2);
+
+		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
+		/* The controller on R-Car Gen3 needs to wait up to 90 usec */
+		udelay(90);
+
+		usbhs_sys_clock_ctrl(priv, enable);
+	} else {
+		usbhs_sys_clock_ctrl(priv, enable);
+
+		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
+	}
+
+	return 0;
+}
+
+void usbhsc_hotplug(struct usbhs_priv *priv)
+{
+	int ret;
+
+	ret = usbhs_mod_change(priv, USBHS_GADGET);
+	if (ret < 0)
+		return;
+
+	usbhs_rcar3_power_ctrl(priv, true);
+
+	/* bus init */
+	usbhsc_set_buswait(priv);
+	usbhsc_bus_init(priv);
+
+	/* module start */
+	usbhs_mod_call(priv, start, priv);
+}
+
+#define USB2_OBINTSTA		0x604
+#define USB2_OBINT_SESSVLDCHG		BIT(12)
+#define USB2_OBINT_IDDIGCHG		BIT(11)
+
+static int usbhs_udc_otg_gadget_handle_interrupts(struct udevice *dev)
+{
+	struct usbhs_priv_otg_data *priv = dev_get_priv(dev);
+	const u32 status = readl(priv->phybase + USB2_OBINTSTA);
+
+	/* We don't have a good way to forward IRQ to PHY yet */
+	if (status & (USB2_OBINT_SESSVLDCHG | USB2_OBINT_IDDIGCHG)) {
+		writel(USB2_OBINT_SESSVLDCHG | USB2_OBINT_IDDIGCHG,
+		       priv->phybase + USB2_OBINTSTA);
+		generic_phy_set_mode(&priv->phy, PHY_MODE_USB_OTG, 0);
+	}
+
+	usbhs_interrupt(0, &priv->usbhs_priv);
+
+	return 0;
+}
+
+static int usbhs_probe(struct usbhs_priv *priv)
+{
+	int ret;
+
+	priv->dparam.type = USBHS_TYPE_RCAR_GEN3;
+	priv->dparam.pio_dma_border = 64;
+	priv->dparam.pipe_configs = usbhsc_new_pipe;
+	priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
+
+	/* call pipe and module init */
+	ret = usbhs_pipe_probe(priv);
+	if (ret < 0)
+		return ret;
+
+	ret = usbhs_fifo_probe(priv);
+	if (ret < 0)
+		goto probe_end_pipe_exit;
+
+	ret = usbhs_mod_probe(priv);
+	if (ret < 0)
+		goto probe_end_fifo_exit;
+
+	usbhs_sys_clock_ctrl(priv, 0);
+
+	usbhs_rcar3_power_ctrl(priv, true);
+	usbhs_mod_autonomy_mode(priv);
+	usbhsc_hotplug(priv);
+
+	return ret;
+
+probe_end_fifo_exit:
+	usbhs_fifo_remove(priv);
+probe_end_pipe_exit:
+	usbhs_pipe_remove(priv);
+	return ret;
+}
+
+static int usbhs_udc_otg_probe(struct udevice *dev)
+{
+	struct usbhs_priv_otg_data *priv = dev_get_priv(dev);
+	struct usb_gadget *gadget;
+	struct clk_bulk clk_bulk;
+	int ret = -EINVAL;
+
+	priv->base = dev_read_addr_ptr(dev);
+	if (!priv->base)
+		return -EINVAL;
+
+	ret = clk_get_bulk(dev, &clk_bulk);
+	if (ret)
+		return ret;
+
+	ret = clk_enable_bulk(&clk_bulk);
+	if (ret)
+		return ret;
+
+	clrsetbits_le32(priv->base + UGCTRL2, UGCTRL2_USB0SEL_MASK, UGCTRL2_USB0SEL_EHCI);
+	clrsetbits_le16(priv->base + LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
+
+	ret = generic_setup_phy(dev, &priv->phy, 0, PHY_MODE_USB_OTG, 1);
+	if (ret)
+		goto err_clk;
+
+	priv->phybase = dev_read_addr_ptr(priv->phy.dev);
+
+	priv->usbhs_priv.pdev = &priv->usbhs_dev;
+	priv->usbhs_priv.base = priv->base;
+	priv->usbhs_dev.dev.driver_data = &priv->usbhs_priv;
+	ret = usbhs_probe(&priv->usbhs_priv);
+	if (ret < 0)
+		goto err_phy;
+
+	gadget = usbhsg_get_gadget(&priv->usbhs_priv);
+	gadget->is_dualspeed = 1;
+	gadget->is_otg = 0;
+	gadget->is_a_peripheral = 0;
+	gadget->b_hnp_enable = 0;
+	gadget->a_hnp_support = 0;
+	gadget->a_alt_hnp_support = 0;
+
+	return usb_add_gadget_udc((struct device *)dev, gadget);
+
+err_phy:
+	generic_shutdown_phy(&priv->phy);
+err_clk:
+	clk_disable_bulk(&clk_bulk);
+	return ret;
+}
+
+static int usbhs_udc_otg_remove(struct udevice *dev)
+{
+	struct usbhs_priv_otg_data *priv = dev_get_priv(dev);
+
+	usbhs_rcar3_power_ctrl(&priv->usbhs_priv, false);
+	usbhs_mod_remove(&priv->usbhs_priv);
+	usbhs_fifo_remove(&priv->usbhs_priv);
+	usbhs_pipe_remove(&priv->usbhs_priv);
+
+	generic_shutdown_phy(&priv->phy);
+
+	return dm_scan_fdt_dev(dev);
+}
+
+static const struct udevice_id usbhs_udc_otg_ids[] = {
+	{ .compatible = "renesas,rcar-gen3-usbhs" },
+	{},
+};
+
+static const struct usb_gadget_generic_ops usbhs_udc_otg_ops = {
+	.handle_interrupts = usbhs_udc_otg_gadget_handle_interrupts,
+};
+
+U_BOOT_DRIVER(usbhs_udc_otg) = {
+	.name		= "usbhs-udc-otg",
+	.id		= UCLASS_USB_GADGET_GENERIC,
+	.ops		= &usbhs_udc_otg_ops,
+	.of_match	= usbhs_udc_otg_ids,
+	.probe		= usbhs_udc_otg_probe,
+	.remove		= usbhs_udc_otg_remove,
+	.priv_auto	= sizeof(struct usbhs_priv_otg_data),
+};
diff --git a/drivers/usb/gadget/rcar/common.h b/drivers/usb/gadget/rcar/common.h
new file mode 100644
index 00000000000..544cfd77cdf
--- /dev/null
+++ b/drivers/usb/gadget/rcar/common.h
@@ -0,0 +1,328 @@
+/* SPDX-License-Identifier: GPL-1.0+ */
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#ifndef RENESAS_USB_DRIVER_H
+#define RENESAS_USB_DRIVER_H
+
+#include <dm/device.h>
+#include <dm/device_compat.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include "renesas_usb.h"
+
+struct usbhs_priv;
+
+#include "mod.h"
+#include "pipe.h"
+
+/*
+ *
+ *		register define
+ *
+ */
+#define SYSCFG		0x0000
+#define BUSWAIT		0x0002
+#define DVSTCTR		0x0008
+#define TESTMODE	0x000C
+#define CFIFO		0x0014
+#define CFIFOSEL	0x0020
+#define CFIFOCTR	0x0022
+#define D0FIFO		0x0100
+#define D0FIFOSEL	0x0028
+#define D0FIFOCTR	0x002A
+#define D1FIFO		0x0120
+#define D1FIFOSEL	0x002C
+#define D1FIFOCTR	0x002E
+#define INTENB0		0x0030
+#define INTENB1		0x0032
+#define BRDYENB		0x0036
+#define NRDYENB		0x0038
+#define BEMPENB		0x003A
+#define INTSTS0		0x0040
+#define INTSTS1		0x0042
+#define BRDYSTS		0x0046
+#define NRDYSTS		0x0048
+#define BEMPSTS		0x004A
+#define FRMNUM		0x004C
+#define USBREQ		0x0054	/* USB request type register */
+#define USBVAL		0x0056	/* USB request value register */
+#define USBINDX		0x0058	/* USB request index register */
+#define USBLENG		0x005A	/* USB request length register */
+#define DCPCFG		0x005C
+#define DCPMAXP		0x005E
+#define DCPCTR		0x0060
+#define PIPESEL		0x0064
+#define PIPECFG		0x0068
+#define PIPEBUF		0x006A
+#define PIPEMAXP	0x006C
+#define PIPEPERI	0x006E
+#define PIPEnCTR	0x0070
+#define PIPE1TRE	0x0090
+#define PIPE1TRN	0x0092
+#define PIPE2TRE	0x0094
+#define PIPE2TRN	0x0096
+#define PIPE3TRE	0x0098
+#define PIPE3TRN	0x009A
+#define PIPE4TRE	0x009C
+#define PIPE4TRN	0x009E
+#define PIPE5TRE	0x00A0
+#define PIPE5TRN	0x00A2
+#define PIPEBTRE	0x00A4
+#define PIPEBTRN	0x00A6
+#define PIPECTRE	0x00A8
+#define PIPECTRN	0x00AA
+#define PIPEDTRE	0x00AC
+#define PIPEDTRN	0x00AE
+#define PIPEETRE	0x00B0
+#define PIPEETRN	0x00B2
+#define PIPEFTRE	0x00B4
+#define PIPEFTRN	0x00B6
+#define PIPE9TRE	0x00B8
+#define PIPE9TRN	0x00BA
+#define PIPEATRE	0x00BC
+#define PIPEATRN	0x00BE
+#define DEVADD0		0x00D0 /* Device address n configuration */
+#define DEVADD1		0x00D2
+#define DEVADD2		0x00D4
+#define DEVADD3		0x00D6
+#define DEVADD4		0x00D8
+#define DEVADD5		0x00DA
+#define DEVADD6		0x00DC
+#define DEVADD7		0x00DE
+#define DEVADD8		0x00E0
+#define DEVADD9		0x00E2
+#define DEVADDA		0x00E4
+#define D2FIFOSEL	0x00F0	/* for R-Car Gen2 */
+#define D2FIFOCTR	0x00F2	/* for R-Car Gen2 */
+#define D3FIFOSEL	0x00F4	/* for R-Car Gen2 */
+#define D3FIFOCTR	0x00F6	/* for R-Car Gen2 */
+#define SUSPMODE	0x0102	/* for RZ/A */
+
+/* SYSCFG */
+#define SCKE	(1 << 10)	/* USB Module Clock Enable */
+#define CNEN	(1 << 8)	/* Single-ended receiver operation Enable */
+#define HSE	(1 << 7)	/* High-Speed Operation Enable */
+#define DCFM	(1 << 6)	/* Controller Function Select */
+#define DRPD	(1 << 5)	/* D+ Line/D- Line Resistance Control */
+#define DPRPU	(1 << 4)	/* D+ Line Resistance Control */
+#define USBE	(1 << 0)	/* USB Module Operation Enable */
+#define UCKSEL	(1 << 2)	/* Clock Select for RZ/A1 */
+#define UPLLE	(1 << 1)	/* USB PLL Enable for RZ/A1 */
+
+/* DVSTCTR */
+#define EXTLP	(1 << 10)	/* Controls the EXTLP pin output state */
+#define PWEN	(1 << 9)	/* Controls the PWEN pin output state */
+#define USBRST	(1 << 6)	/* Bus Reset Output */
+#define UACT	(1 << 4)	/* USB Bus Enable */
+#define RHST	(0x7)		/* Reset Handshake */
+#define  RHST_LOW_SPEED  1	/* Low-speed connection */
+#define  RHST_FULL_SPEED 2	/* Full-speed connection */
+#define  RHST_HIGH_SPEED 3	/* High-speed connection */
+
+/* CFIFOSEL */
+#define DREQE	(1 << 12)	/* DMA Transfer Request Enable */
+#define MBW_32	(0x2 << 10)	/* CFIFO Port Access Bit Width */
+
+/* CFIFOCTR */
+#define BVAL	(1 << 15)	/* Buffer Memory Enable Flag */
+#define BCLR	(1 << 14)	/* CPU buffer clear */
+#define FRDY	(1 << 13)	/* FIFO Port Ready */
+#define DTLN_MASK (0x0FFF)	/* Receive Data Length */
+
+/* INTENB0 */
+#define VBSE	(1 << 15)	/* Enable IRQ VBUS_0 and VBUSIN_0 */
+#define RSME	(1 << 14)	/* Enable IRQ Resume */
+#define SOFE	(1 << 13)	/* Enable IRQ Frame Number Update */
+#define DVSE	(1 << 12)	/* Enable IRQ Device State Transition */
+#define CTRE	(1 << 11)	/* Enable IRQ Control Stage Transition */
+#define BEMPE	(1 << 10)	/* Enable IRQ Buffer Empty */
+#define NRDYE	(1 << 9)	/* Enable IRQ Buffer Not Ready Response */
+#define BRDYE	(1 << 8)	/* Enable IRQ Buffer Ready */
+
+/* INTENB1 */
+#define BCHGE	(1 << 14)	/* USB Bus Change Interrupt Enable */
+#define DTCHE	(1 << 12)	/* Disconnection Detect Interrupt Enable */
+#define ATTCHE	(1 << 11)	/* Connection Detect Interrupt Enable */
+#define EOFERRE	(1 << 6)	/* EOF Error Detect Interrupt Enable */
+#define SIGNE	(1 << 5)	/* Setup Transaction Error Interrupt Enable */
+#define SACKE	(1 << 4)	/* Setup Transaction ACK Interrupt Enable */
+
+/* INTSTS0 */
+#define VBINT	(1 << 15)	/* VBUS0_0 and VBUS1_0 Interrupt Status */
+#define DVST	(1 << 12)	/* Device State Transition Interrupt Status */
+#define CTRT	(1 << 11)	/* Control Stage Interrupt Status */
+#define BEMP	(1 << 10)	/* Buffer Empty Interrupt Status */
+#define BRDY	(1 << 8)	/* Buffer Ready Interrupt Status */
+#define VBSTS	(1 << 7)	/* VBUS_0 and VBUSIN_0 Input Status */
+#define VALID	(1 << 3)	/* USB Request Receive */
+
+#define DVSQ_MASK		(0x7 << 4)	/* Device State */
+#define  POWER_STATE		(0 << 4)
+#define  DEFAULT_STATE		(1 << 4)
+#define  ADDRESS_STATE		(2 << 4)
+#define  CONFIGURATION_STATE	(3 << 4)
+#define  SUSPENDED_STATE	(4 << 4)
+
+#define CTSQ_MASK		(0x7)	/* Control Transfer Stage */
+#define  IDLE_SETUP_STAGE	0	/* Idle stage or setup stage */
+#define  READ_DATA_STAGE	1	/* Control read data stage */
+#define  READ_STATUS_STAGE	2	/* Control read status stage */
+#define  WRITE_DATA_STAGE	3	/* Control write data stage */
+#define  WRITE_STATUS_STAGE	4	/* Control write status stage */
+#define  NODATA_STATUS_STAGE	5	/* Control write NoData status stage */
+#define  SEQUENCE_ERROR		6	/* Control transfer sequence error */
+
+/* INTSTS1 */
+#define OVRCR	(1 << 15) /* OVRCR Interrupt Status */
+#define BCHG	(1 << 14) /* USB Bus Change Interrupt Status */
+#define DTCH	(1 << 12) /* USB Disconnection Detect Interrupt Status */
+#define ATTCH	(1 << 11) /* ATTCH Interrupt Status */
+#define EOFERR	(1 << 6)  /* EOF Error Detect Interrupt Status */
+#define SIGN	(1 << 5)  /* Setup Transaction Error Interrupt Status */
+#define SACK	(1 << 4)  /* Setup Transaction ACK Response Interrupt Status */
+
+/* PIPECFG */
+/* DCPCFG */
+#define TYPE_NONE	(0 << 14)	/* Transfer Type */
+#define TYPE_BULK	(1 << 14)
+#define TYPE_INT	(2 << 14)
+#define TYPE_ISO	(3 << 14)
+#define BFRE		(1 << 10)	/* BRDY Interrupt Operation Spec. */
+#define DBLB		(1 << 9)	/* Double Buffer Mode */
+#define SHTNAK		(1 << 7)	/* Pipe Disable in Transfer End */
+#define DIR_OUT		(1 << 4)	/* Transfer Direction */
+
+/* PIPEMAXP */
+/* DCPMAXP */
+#define DEVSEL_MASK	(0xF << 12)	/* Device Select */
+#define DCP_MAXP_MASK	(0x7F)
+#define PIPE_MAXP_MASK	(0x7FF)
+
+/* PIPEBUF */
+#define BUFSIZE_SHIFT	10
+#define BUFSIZE_MASK	(0x1F << BUFSIZE_SHIFT)
+#define BUFNMB_MASK	(0xFF)
+
+/* PIPEnCTR */
+/* DCPCTR */
+#define BSTS		(1 << 15)	/* Buffer Status */
+#define SUREQ		(1 << 14)	/* Sending SETUP Token */
+#define INBUFM		(1 << 14)	/* (PIPEnCTR) Transfer Buffer Monitor */
+#define CSSTS		(1 << 12)	/* CSSTS Status */
+#define	ACLRM		(1 << 9)	/* Buffer Auto-Clear Mode */
+#define SQCLR		(1 << 8)	/* Toggle Bit Clear */
+#define SQSET		(1 << 7)	/* Toggle Bit Set */
+#define SQMON		(1 << 6)	/* Toggle Bit Check */
+#define PBUSY		(1 << 5)	/* Pipe Busy */
+#define PID_MASK	(0x3)		/* Response PID */
+#define  PID_NAK	0
+#define  PID_BUF	1
+#define  PID_STALL10	2
+#define  PID_STALL11	3
+
+#define CCPL		(1 << 2)	/* Control Transfer End Enable */
+
+/* PIPEnTRE */
+#define TRENB		(1 << 9)	/* Transaction Counter Enable */
+#define TRCLR		(1 << 8)	/* Transaction Counter Clear */
+
+/* FRMNUM */
+#define FRNM_MASK	(0x7FF)
+
+/* DEVADDn */
+#define UPPHUB(x)	(((x) & 0xF) << 11)	/* HUB Register */
+#define HUBPORT(x)	(((x) & 0x7) << 8)	/* HUB Port for Target Device */
+#define USBSPD(x)	(((x) & 0x3) << 6)	/* Device Transfer Rate */
+#define USBSPD_SPEED_LOW	0x1
+#define USBSPD_SPEED_FULL	0x2
+#define USBSPD_SPEED_HIGH	0x3
+
+/* SUSPMODE */
+#define SUSPM		(1 << 14)	/* SuspendM Control */
+
+/*
+ *		struct
+ */
+struct usbhs_priv {
+	void __iomem *base;
+	struct renesas_usbhs_driver_param	dparam;
+	struct platform_device			*pdev;
+
+	/*
+	 * module control
+	 */
+	struct usbhs_mod_info mod_info;
+
+	/*
+	 * pipe control
+	 */
+	struct usbhs_pipe_info pipe_info;
+
+	/*
+	 * fifo control
+	 */
+	struct usbhs_fifo_info fifo_info;
+};
+
+/*
+ * common
+ */
+u16 usbhs_read(struct usbhs_priv *priv, u32 reg);
+void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data);
+void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data);
+
+#define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f)
+#define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f)
+
+/*
+ * sysconfig
+ */
+void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable);
+void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable);
+void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable);
+void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode);
+
+/*
+ * usb request
+ */
+void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
+void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
+
+/*
+ * bus
+ */
+void usbhs_bus_send_sof_enable(struct usbhs_priv *priv);
+void usbhs_bus_send_reset(struct usbhs_priv *priv);
+int usbhs_bus_get_speed(struct usbhs_priv *priv);
+int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable);
+void usbhsc_hotplug(struct usbhs_priv *priv);
+
+/*
+ * frame
+ */
+int usbhs_frame_get_num(struct usbhs_priv *priv);
+
+/*
+ * device config
+ */
+int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub,
+			   u16 hubport, u16 speed);
+
+/*
+ * interrupt functions
+ */
+void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit);
+
+/*
+ * data
+ */
+#define usbhs_get_dparam(priv, param)	(priv->dparam.param)
+#define usbhs_priv_to_dev(priv)		(&priv->pdev->dev)
+
+#endif /* RENESAS_USB_DRIVER_H */
diff --git a/drivers/usb/gadget/rcar/fifo.c b/drivers/usb/gadget/rcar/fifo.c
new file mode 100644
index 00000000000..6016b2987d5
--- /dev/null
+++ b/drivers/usb/gadget/rcar/fifo.c
@@ -0,0 +1,1067 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include "common.h"
+#include "pipe.h"
+
+#define usbhsf_get_cfifo(p)	(&((p)->fifo_info.cfifo))
+
+#define usbhsf_fifo_is_busy(f)	((f)->pipe) /* see usbhs_pipe_select_fifo */
+
+/*
+ *		packet initialize
+ */
+void usbhs_pkt_init(struct usbhs_pkt *pkt)
+{
+	INIT_LIST_HEAD(&pkt->node);
+}
+
+/*
+ *		packet control function
+ */
+static int usbhsf_null_handle(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_err(dev, "null handler\n");
+
+	return -EINVAL;
+}
+
+static const struct usbhs_pkt_handle usbhsf_null_handler = {
+	.prepare = usbhsf_null_handle,
+	.try_run = usbhsf_null_handle,
+};
+
+void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
+		    void (*done)(struct usbhs_priv *priv,
+				 struct usbhs_pkt *pkt),
+		    void *buf, int len, int zero, int sequence)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	unsigned long flags;
+
+	if (!done) {
+		dev_err(dev, "no done function\n");
+		return;
+	}
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	if (!pipe->handler) {
+		dev_err(dev, "no handler function\n");
+		pipe->handler = &usbhsf_null_handler;
+	}
+
+	list_move_tail(&pkt->node, &pipe->list);
+
+	/*
+	 * each pkt must hold own handler.
+	 * because handler might be changed by its situation.
+	 * dma handler -> pio handler.
+	 */
+	pkt->pipe	= pipe;
+	pkt->buf	= buf;
+	pkt->handler	= pipe->handler;
+	pkt->length	= len;
+	pkt->zero	= zero;
+	pkt->actual	= 0;
+	pkt->done	= done;
+	pkt->sequence	= sequence;
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+}
+
+static void __usbhsf_pkt_del(struct usbhs_pkt *pkt)
+{
+	list_del_init(&pkt->node);
+}
+
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
+{
+	return list_first_entry_or_null(&pipe->list, struct usbhs_pkt, node);
+}
+
+static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe,
+				 struct usbhs_fifo *fifo);
+static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo,
+					    struct usbhs_pkt *pkt);
+#define usbhsf_dma_map(p)	__usbhsf_dma_map_ctrl(p, 1)
+#define usbhsf_dma_unmap(p)	__usbhsf_dma_map_ctrl(p, 0)
+static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map);
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
+struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
+{
+	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
+	unsigned long flags;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	usbhs_pipe_disable(pipe);
+
+	if (!pkt)
+		pkt = __usbhsf_pkt_get(pipe);
+
+	if (pkt) {
+		struct dma_chan *chan = NULL;
+
+		if (fifo)
+			chan = usbhsf_dma_chan_get(fifo, pkt);
+		if (chan)
+			usbhsf_dma_unmap(pkt);
+
+		usbhs_pipe_clear_without_sequence(pipe, 0, 0);
+		usbhs_pipe_running(pipe, 0);
+
+		__usbhsf_pkt_del(pkt);
+	}
+
+	if (fifo)
+		usbhsf_fifo_unselect(pipe, fifo);
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	return pkt;
+}
+
+enum {
+	USBHSF_PKT_PREPARE,
+	USBHSF_PKT_TRY_RUN,
+	USBHSF_PKT_DMA_DONE,
+};
+
+static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_pkt *pkt;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int (*func)(struct usbhs_pkt *pkt, int *is_done);
+	unsigned long flags;
+	int ret = 0;
+	int is_done = 0;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	pkt = __usbhsf_pkt_get(pipe);
+	if (!pkt) {
+		ret = -EINVAL;
+		goto __usbhs_pkt_handler_end;
+	}
+
+	switch (type) {
+	case USBHSF_PKT_PREPARE:
+		func = pkt->handler->prepare;
+		break;
+	case USBHSF_PKT_TRY_RUN:
+		func = pkt->handler->try_run;
+		break;
+	case USBHSF_PKT_DMA_DONE:
+		func = pkt->handler->dma_done;
+		break;
+	default:
+		dev_err(dev, "unknown pkt handler\n");
+		goto __usbhs_pkt_handler_end;
+	}
+
+	if (likely(func))
+		ret = func(pkt, &is_done);
+
+	if (is_done)
+		__usbhsf_pkt_del(pkt);
+
+__usbhs_pkt_handler_end:
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	if (is_done) {
+		pkt->done(priv, pkt);
+		usbhs_pkt_start(pipe);
+	}
+
+	return ret;
+}
+
+void usbhs_pkt_start(struct usbhs_pipe *pipe)
+{
+	usbhsf_pkt_handler(pipe, USBHSF_PKT_PREPARE);
+}
+
+/*
+ *		irq enable/disable function
+ */
+#define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_bempsts, e)
+#define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_brdysts, e)
+#define usbhsf_irq_callback_ctrl(pipe, status, enable)			\
+	({								\
+		struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);	\
+		struct usbhs_mod *mod = usbhs_mod_get_current(priv);	\
+		u16 status = (1 << usbhs_pipe_number(pipe));		\
+		if (!mod)						\
+			return;						\
+		if (enable)						\
+			mod->status |= status;				\
+		else							\
+			mod->status &= ~status;				\
+		usbhs_irq_callback_update(priv, mod);			\
+	})
+
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable)
+{
+	/*
+	 * And DCP pipe can NOT use "ready interrupt" for "send"
+	 * it should use "empty" interrupt.
+	 * see
+	 *   "Operation" - "Interrupt Function" - "BRDY Interrupt"
+	 *
+	 * on the other hand, normal pipe can use "ready interrupt" for "send"
+	 * even though it is single/double buffer
+	 */
+	if (usbhs_pipe_is_dcp(pipe))
+		usbhsf_irq_empty_ctrl(pipe, enable);
+	else
+		usbhsf_irq_ready_ctrl(pipe, enable);
+}
+
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable)
+{
+	usbhsf_irq_ready_ctrl(pipe, enable);
+}
+
+/*
+ *		FIFO ctrl
+ */
+static void usbhsf_send_terminator(struct usbhs_pipe *pipe,
+				   struct usbhs_fifo *fifo)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	usbhs_bset(priv, fifo->ctr, BVAL, BVAL);
+}
+
+static int usbhsf_fifo_barrier(struct usbhs_priv *priv,
+			       struct usbhs_fifo *fifo)
+{
+	/* The FIFO port is accessible */
+	if (usbhs_read(priv, fifo->ctr) & FRDY)
+		return 0;
+
+	return -EBUSY;
+}
+
+static void usbhsf_fifo_clear(struct usbhs_pipe *pipe,
+			      struct usbhs_fifo *fifo)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int ret = 0;
+
+	if (!usbhs_pipe_is_dcp(pipe)) {
+		/*
+		 * This driver checks the pipe condition first to avoid -EBUSY
+		 * from usbhsf_fifo_barrier() if the pipe is RX direction and
+		 * empty.
+		 */
+		if (usbhs_pipe_is_dir_in(pipe))
+			ret = usbhs_pipe_is_accessible(pipe);
+		if (!ret)
+			ret = usbhsf_fifo_barrier(priv, fifo);
+	}
+
+	/*
+	 * if non-DCP pipe, this driver should set BCLR when
+	 * usbhsf_fifo_barrier() returns 0.
+	 */
+	if (!ret)
+		usbhs_write(priv, fifo->ctr, BCLR);
+}
+
+static int usbhsf_fifo_rcv_len(struct usbhs_priv *priv,
+			       struct usbhs_fifo *fifo)
+{
+	return usbhs_read(priv, fifo->ctr) & DTLN_MASK;
+}
+
+static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe,
+				 struct usbhs_fifo *fifo)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	usbhs_pipe_select_fifo(pipe, NULL);
+	usbhs_write(priv, fifo->sel, 0);
+}
+
+static int usbhsf_fifo_select(struct usbhs_pipe *pipe,
+			      struct usbhs_fifo *fifo,
+			      int write)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int timeout = 1024;
+	u16 mask = ((1 << 5) | 0xF);		/* mask of ISEL | CURPIPE */
+	u16 base = usbhs_pipe_number(pipe);	/* CURPIPE */
+
+	if (usbhs_pipe_is_busy(pipe) ||
+	    usbhsf_fifo_is_busy(fifo))
+		return -EBUSY;
+
+	if (usbhs_pipe_is_dcp(pipe)) {
+		base |= (1 == write) << 5;	/* ISEL */
+
+		if (usbhs_mod_is_host(priv))
+			usbhs_dcp_dir_for_host(pipe, write);
+	}
+
+	/* "base" will be used below  */
+	usbhs_write(priv, fifo->sel, base | MBW_32);
+
+	/* check ISEL and CURPIPE value */
+	while (timeout--) {
+		if (base == (mask & usbhs_read(priv, fifo->sel))) {
+			usbhs_pipe_select_fifo(pipe, fifo);
+			return 0;
+		}
+		udelay(10);
+	}
+
+	dev_err(dev, "fifo select error\n");
+
+	return -EIO;
+}
+
+/*
+ *		DCP status stage
+ */
+static int usbhs_dcp_dir_switch_to_write(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	usbhs_pipe_disable(pipe);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 1);
+	if (ret < 0) {
+		dev_err(dev, "%s() failed\n", __func__);
+		return ret;
+	}
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+
+	usbhsf_fifo_clear(pipe, fifo);
+	usbhsf_send_terminator(pipe, fifo);
+
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	usbhsf_tx_irq_ctrl(pipe, 1);
+	usbhs_pipe_enable(pipe);
+
+	return ret;
+}
+
+static int usbhs_dcp_dir_switch_to_read(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	usbhs_pipe_disable(pipe);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0) {
+		dev_err(dev, "%s() fail\n", __func__);
+		return ret;
+	}
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+	usbhsf_fifo_clear(pipe, fifo);
+
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	usbhsf_rx_irq_ctrl(pipe, 1);
+	usbhs_pipe_enable(pipe);
+
+	return ret;
+
+}
+
+static int usbhs_dcp_dir_switch_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+
+	if (pkt->handler == &usbhs_dcp_status_stage_in_handler)
+		usbhsf_tx_irq_ctrl(pipe, 0);
+	else
+		usbhsf_rx_irq_ctrl(pipe, 0);
+
+	pkt->actual = pkt->length;
+	*is_done = 1;
+
+	return 0;
+}
+
+const struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler = {
+	.prepare = usbhs_dcp_dir_switch_to_write,
+	.try_run = usbhs_dcp_dir_switch_done,
+};
+
+const struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler = {
+	.prepare = usbhs_dcp_dir_switch_to_read,
+	.try_run = usbhs_dcp_dir_switch_done,
+};
+
+/*
+ *		DCP data stage (push)
+ */
+static int usbhsf_dcp_data_stage_try_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+
+	/*
+	 * change handler to PIO push
+	 */
+	pkt->handler = &usbhs_fifo_pio_push_handler;
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+const struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler = {
+	.prepare = usbhsf_dcp_data_stage_try_push,
+};
+
+/*
+ *		DCP data stage (pop)
+ */
+static int usbhsf_dcp_data_stage_prepare_pop(struct usbhs_pkt *pkt,
+					     int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv);
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/*
+	 * prepare pop for DCP should
+	 *  - change DCP direction,
+	 *  - clear fifo
+	 *  - DATA1
+	 */
+	usbhs_pipe_disable(pipe);
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+
+	usbhsf_fifo_select(pipe, fifo, 0);
+	usbhsf_fifo_clear(pipe, fifo);
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	/*
+	 * change handler to PIO pop
+	 */
+	pkt->handler = &usbhs_fifo_pio_pop_handler;
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+const struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler = {
+	.prepare = usbhsf_dcp_data_stage_prepare_pop,
+};
+
+/*
+ *		PIO push handler
+ */
+static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	void __iomem *addr = priv->base + fifo->port;
+	u8 *buf;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+	int total_len;
+	int i, ret, len;
+	int is_short;
+
+	usbhs_pipe_data_sequence(pipe, pkt->sequence);
+	pkt->sequence = -1; /* -1 sequence will be ignored */
+
+	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 1);
+	if (ret < 0)
+		return 0;
+
+	ret = usbhs_pipe_is_accessible(pipe);
+	if (ret < 0) {
+		/* inaccessible pipe is not an error */
+		ret = 0;
+		goto usbhs_fifo_write_busy;
+	}
+
+	ret = usbhsf_fifo_barrier(priv, fifo);
+	if (ret < 0)
+		goto usbhs_fifo_write_busy;
+
+	buf		= pkt->buf    + pkt->actual;
+	len		= pkt->length - pkt->actual;
+	len		= min(len, maxp);
+	total_len	= len;
+	is_short	= total_len < maxp;
+
+	/*
+	 * FIXME
+	 *
+	 * 32-bit access only
+	 */
+	if (len >= 4 && !((unsigned long)buf & 0x03)) {
+		iowrite32_rep(addr, buf, len / 4);
+		len %= 4;
+		buf += total_len - len;
+	}
+
+	/* the rest operation */
+	if (usbhs_get_dparam(priv, cfifo_byte_addr)) {
+		for (i = 0; i < len; i++)
+			iowrite8(buf[i], addr + (i & 0x03));
+	} else {
+		for (i = 0; i < len; i++)
+			iowrite8(buf[i], addr + (0x03 - (i & 0x03)));
+	}
+
+	/*
+	 * variable update
+	 */
+	pkt->actual += total_len;
+
+	if (pkt->actual < pkt->length)
+		*is_done = 0;		/* there are remainder data */
+	else if (is_short)
+		*is_done = 1;		/* short packet */
+	else
+		*is_done = !pkt->zero;	/* send zero packet ? */
+
+	/*
+	 * pipe/irq handling
+	 */
+	if (is_short)
+		usbhsf_send_terminator(pipe, fifo);
+
+	usbhsf_tx_irq_ctrl(pipe, !*is_done);
+	usbhs_pipe_running(pipe, !*is_done);
+	usbhs_pipe_enable(pipe);
+
+	dev_dbg(dev, "  send %d (%d/ %d/ %d/ %d)\n",
+		usbhs_pipe_number(pipe),
+		pkt->length, pkt->actual, *is_done, pkt->zero);
+
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	return 0;
+
+usbhs_fifo_write_busy:
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	/*
+	 * pipe is busy.
+	 * retry in interrupt
+	 */
+	usbhsf_tx_irq_ctrl(pipe, 1);
+	usbhs_pipe_running(pipe, 1);
+
+	return ret;
+}
+
+static int usbhsf_pio_prepare_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	if (usbhs_pipe_is_running(pkt->pipe))
+		return 0;
+
+	return usbhsf_pio_try_push(pkt, is_done);
+}
+
+const struct usbhs_pkt_handle usbhs_fifo_pio_push_handler = {
+	.prepare = usbhsf_pio_prepare_push,
+	.try_run = usbhsf_pio_try_push,
+};
+
+/*
+ *		PIO pop handler
+ */
+static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv);
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	if (usbhs_pipe_is_running(pipe))
+		return 0;
+
+	/*
+	 * pipe enable to prepare packet receive
+	 */
+	usbhs_pipe_data_sequence(pipe, pkt->sequence);
+	pkt->sequence = -1; /* -1 sequence will be ignored */
+
+	if (usbhs_pipe_is_dcp(pipe))
+		usbhsf_fifo_clear(pipe, fifo);
+
+	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length);
+	usbhs_pipe_enable(pipe);
+	usbhs_pipe_running(pipe, 1);
+	usbhsf_rx_irq_ctrl(pipe, 1);
+
+	return 0;
+}
+
+static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	void __iomem *addr = priv->base + fifo->port;
+	u8 *buf;
+	u32 data = 0;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+	int rcv_len, len;
+	int i, ret;
+	int total_len = 0;
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0)
+		return 0;
+
+	ret = usbhsf_fifo_barrier(priv, fifo);
+	if (ret < 0)
+		goto usbhs_fifo_read_busy;
+
+	rcv_len = usbhsf_fifo_rcv_len(priv, fifo);
+
+	buf		= pkt->buf    + pkt->actual;
+	len		= pkt->length - pkt->actual;
+	len		= min(len, rcv_len);
+	total_len	= len;
+
+	/*
+	 * update actual length first here to decide disable pipe.
+	 * if this pipe keeps BUF status and all data were popped,
+	 * then, next interrupt/token will be issued again
+	 */
+	pkt->actual += total_len;
+
+	if ((pkt->actual == pkt->length) ||	/* receive all data */
+	    (total_len < maxp)) {		/* short packet */
+		*is_done = 1;
+		usbhsf_rx_irq_ctrl(pipe, 0);
+		usbhs_pipe_running(pipe, 0);
+		/*
+		 * If function mode, since this controller is possible to enter
+		 * Control Write status stage at this timing, this driver
+		 * should not disable the pipe. If such a case happens, this
+		 * controller is not able to complete the status stage.
+		 */
+		if (!usbhs_mod_is_host(priv) && !usbhs_pipe_is_dcp(pipe))
+			usbhs_pipe_disable(pipe);	/* disable pipe first */
+	}
+
+	/*
+	 * Buffer clear if Zero-Length packet
+	 *
+	 * see
+	 * "Operation" - "FIFO Buffer Memory" - "FIFO Port Function"
+	 */
+	if (0 == rcv_len) {
+		pkt->zero = 1;
+		usbhsf_fifo_clear(pipe, fifo);
+		goto usbhs_fifo_read_end;
+	}
+
+	/*
+	 * FIXME
+	 *
+	 * 32-bit access only
+	 */
+	if (len >= 4 && !((unsigned long)buf & 0x03)) {
+		ioread32_rep(addr, buf, len / 4);
+		len %= 4;
+		buf += total_len - len;
+	}
+
+	/* the rest operation */
+	for (i = 0; i < len; i++) {
+		if (!(i & 0x03))
+			data = ioread32(addr);
+
+		buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
+	}
+
+usbhs_fifo_read_end:
+	dev_dbg(dev, "  recv %d (%d/ %d/ %d/ %d)\n",
+		usbhs_pipe_number(pipe),
+		pkt->length, pkt->actual, *is_done, pkt->zero);
+
+usbhs_fifo_read_busy:
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	return ret;
+}
+
+const struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler = {
+	.prepare = usbhsf_prepare_pop,
+	.try_run = usbhsf_pio_try_pop,
+};
+
+/*
+ *		DCP ctrol statge handler
+ */
+static int usbhsf_ctrl_stage_end(struct usbhs_pkt *pkt, int *is_done)
+{
+	usbhs_dcp_control_transfer_done(pkt->pipe);
+
+	*is_done = 1;
+
+	return 0;
+}
+
+const struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler = {
+	.prepare = usbhsf_ctrl_stage_end,
+	.try_run = usbhsf_ctrl_stage_end,
+};
+
+/*
+ *		DMA fifo functions
+ */
+static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo,
+					    struct usbhs_pkt *pkt)
+{
+	if (&usbhs_fifo_dma_push_handler == pkt->handler)
+		return fifo->tx_chan;
+
+	if (&usbhs_fifo_dma_pop_handler == pkt->handler)
+		return fifo->rx_chan;
+
+	return NULL;
+}
+
+#define usbhsf_dma_start(p, f)	__usbhsf_dma_ctrl(p, f, DREQE)
+#define usbhsf_dma_stop(p, f)	__usbhsf_dma_ctrl(p, f, 0)
+static void __usbhsf_dma_ctrl(struct usbhs_pipe *pipe,
+			      struct usbhs_fifo *fifo,
+			      u16 dreqe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	usbhs_bset(priv, fifo->sel, DREQE, dreqe);
+}
+
+static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+
+	return info->dma_map_ctrl(pkt, map);
+}
+
+/*
+ *		DMA push handler
+ */
+static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/*
+	 * change handler to PIO
+	 */
+	pkt->handler = &usbhs_fifo_pio_push_handler;
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+static int usbhsf_dma_push_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	int is_short = pkt->trans % usbhs_pipe_get_maxpacket(pipe);
+
+	pkt->actual += pkt->trans;
+
+	if (pkt->actual < pkt->length)
+		*is_done = 0;		/* there are remainder data */
+	else if (is_short)
+		*is_done = 1;		/* short packet */
+	else
+		*is_done = !pkt->zero;	/* send zero packet? */
+
+	usbhs_pipe_running(pipe, !*is_done);
+
+	usbhsf_dma_stop(pipe, pipe->fifo);
+	usbhsf_dma_unmap(pkt);
+	usbhsf_fifo_unselect(pipe, pipe->fifo);
+
+	if (!*is_done) {
+		/* change handler to PIO */
+		pkt->handler = &usbhs_fifo_pio_push_handler;
+		return pkt->handler->try_run(pkt, is_done);
+	}
+
+	return 0;
+}
+
+const struct usbhs_pkt_handle usbhs_fifo_dma_push_handler = {
+	.prepare	= usbhsf_dma_prepare_push,
+	.dma_done	= usbhsf_dma_push_done,
+};
+
+/*
+ *		DMA pop handler
+ */
+
+static int usbhsf_dma_prepare_pop_with_rx_irq(struct usbhs_pkt *pkt,
+					      int *is_done)
+{
+	return usbhsf_prepare_pop(pkt, is_done);
+}
+
+static int usbhsf_dma_prepare_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	return usbhsf_dma_prepare_pop_with_rx_irq(pkt, is_done);
+}
+
+static int usbhsf_dma_try_pop_with_rx_irq(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/*
+	 * change handler to PIO
+	 */
+	pkt->handler = &usbhs_fifo_pio_pop_handler;
+
+	return pkt->handler->try_run(pkt, is_done);
+}
+
+static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+
+	BUG_ON(usbhs_get_dparam(priv, has_usb_dmac));
+
+	return usbhsf_dma_try_pop_with_rx_irq(pkt, is_done);
+}
+
+static int usbhsf_dma_pop_done_with_rx_irq(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+
+	usbhsf_dma_stop(pipe, pipe->fifo);
+	usbhsf_dma_unmap(pkt);
+	usbhsf_fifo_unselect(pipe, pipe->fifo);
+
+	pkt->actual += pkt->trans;
+
+	if ((pkt->actual == pkt->length) ||	/* receive all data */
+	    (pkt->trans < maxp)) {		/* short packet */
+		*is_done = 1;
+		usbhs_pipe_running(pipe, 0);
+	} else {
+		/* re-enable */
+		usbhs_pipe_running(pipe, 0);
+		usbhsf_prepare_pop(pkt, is_done);
+	}
+
+	return 0;
+}
+
+static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	return usbhsf_dma_pop_done_with_rx_irq(pkt, is_done);
+}
+
+const struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler = {
+	.prepare	= usbhsf_dma_prepare_pop,
+	.try_run	= usbhsf_dma_try_pop,
+	.dma_done	= usbhsf_dma_pop_done
+};
+
+/*
+ *		irq functions
+ */
+static int usbhsf_irq_empty(struct usbhs_priv *priv,
+			    struct usbhs_irq_state *irq_state)
+{
+	struct usbhs_pipe *pipe;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int i, ret;
+
+	if (!irq_state->bempsts) {
+		dev_err(dev, "debug %s !!\n", __func__);
+		return -EIO;
+	}
+
+	dev_dbg(dev, "irq empty [0x%04x]\n", irq_state->bempsts);
+
+	/*
+	 * search interrupted "pipe"
+	 * not "uep".
+	 */
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		if (!(irq_state->bempsts & (1 << i)))
+			continue;
+
+		ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN);
+		if (ret < 0)
+			dev_err(dev, "irq_empty run_error %d : %d\n", i, ret);
+	}
+
+	return 0;
+}
+
+static int usbhsf_irq_ready(struct usbhs_priv *priv,
+			    struct usbhs_irq_state *irq_state)
+{
+	struct usbhs_pipe *pipe;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int i, ret;
+
+	if (!irq_state->brdysts) {
+		dev_err(dev, "debug %s !!\n", __func__);
+		return -EIO;
+	}
+
+	dev_dbg(dev, "irq ready [0x%04x]\n", irq_state->brdysts);
+
+	/*
+	 * search interrupted "pipe"
+	 * not "uep".
+	 */
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		if (!(irq_state->brdysts & (1 << i)))
+			continue;
+
+		ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN);
+		if (ret < 0)
+			dev_err(dev, "irq_ready run_error %d : %d\n", i, ret);
+	}
+
+	return 0;
+}
+
+void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+
+	/* clear DCP FIFO of transmission */
+	if (usbhsf_fifo_select(pipe, fifo, 1) < 0)
+		return;
+	usbhsf_fifo_clear(pipe, fifo);
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	/* clear DCP FIFO of reception */
+	if (usbhsf_fifo_select(pipe, fifo, 0) < 0)
+		return;
+	usbhsf_fifo_clear(pipe, fifo);
+	usbhsf_fifo_unselect(pipe, fifo);
+}
+
+/*
+ *		fifo init
+ */
+void usbhs_fifo_init(struct usbhs_priv *priv)
+{
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct usbhs_fifo *cfifo = usbhsf_get_cfifo(priv);
+	struct usbhs_fifo *dfifo;
+	int i;
+
+	mod->irq_empty		= usbhsf_irq_empty;
+	mod->irq_ready		= usbhsf_irq_ready;
+	mod->irq_bempsts	= 0;
+	mod->irq_brdysts	= 0;
+
+	cfifo->pipe	= NULL;
+	usbhs_for_each_dfifo(priv, dfifo, i)
+		dfifo->pipe	= NULL;
+}
+
+void usbhs_fifo_quit(struct usbhs_priv *priv)
+{
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+
+	mod->irq_empty		= NULL;
+	mod->irq_ready		= NULL;
+	mod->irq_bempsts	= 0;
+	mod->irq_brdysts	= 0;
+}
+
+#define __USBHS_DFIFO_INIT(priv, fifo, channel, fifo_port)		\
+do {									\
+	fifo = usbhsf_get_dnfifo(priv, channel);			\
+	fifo->name	= "D"#channel"FIFO";				\
+	fifo->port	= fifo_port;					\
+	fifo->sel	= D##channel##FIFOSEL;				\
+	fifo->ctr	= D##channel##FIFOCTR;				\
+	fifo->tx_slave.shdma_slave.slave_id =				\
+			usbhs_get_dparam(priv, d##channel##_tx_id);	\
+	fifo->rx_slave.shdma_slave.slave_id =				\
+			usbhs_get_dparam(priv, d##channel##_rx_id);	\
+} while (0)
+
+#define USBHS_DFIFO_INIT(priv, fifo, channel)				\
+		__USBHS_DFIFO_INIT(priv, fifo, channel, D##channel##FIFO)
+#define USBHS_DFIFO_INIT_NO_PORT(priv, fifo, channel)			\
+		__USBHS_DFIFO_INIT(priv, fifo, channel, 0)
+
+int usbhs_fifo_probe(struct usbhs_priv *priv)
+{
+	struct usbhs_fifo *fifo;
+
+	/* CFIFO */
+	fifo = usbhsf_get_cfifo(priv);
+	fifo->name	= "CFIFO";
+	fifo->port	= CFIFO;
+	fifo->sel	= CFIFOSEL;
+	fifo->ctr	= CFIFOCTR;
+
+	/* DFIFO */
+	USBHS_DFIFO_INIT(priv, fifo, 0);
+	USBHS_DFIFO_INIT(priv, fifo, 1);
+	USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 2);
+	USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 3);
+
+	return 0;
+}
+
+void usbhs_fifo_remove(struct usbhs_priv *priv)
+{
+}
diff --git a/drivers/usb/gadget/rcar/fifo.h b/drivers/usb/gadget/rcar/fifo.h
new file mode 100644
index 00000000000..86746ca9bdd
--- /dev/null
+++ b/drivers/usb/gadget/rcar/fifo.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-1.0+ */
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#ifndef RENESAS_USB_FIFO_H
+#define RENESAS_USB_FIFO_H
+
+#include <dma.h>
+#include "pipe.h"
+
+/*
+ * Drivers, using this library are expected to embed struct shdma_dev,
+ * struct shdma_chan, struct shdma_desc, and struct shdma_slave
+ * in their respective device, channel, descriptor and slave objects.
+ */
+
+struct shdma_slave {
+	int slave_id;
+};
+
+/* Used by slave DMA clients to request DMA to/from a specific peripheral */
+struct sh_dmae_slave {
+	struct shdma_slave		shdma_slave;	/* Set by the platform */
+};
+
+struct usbhs_fifo {
+	char *name;
+	u32 port;	/* xFIFO */
+	u32 sel;	/* xFIFOSEL */
+	u32 ctr;	/* xFIFOCTR */
+
+	struct usbhs_pipe	*pipe;
+
+	struct dma_chan		*tx_chan;
+	struct dma_chan		*rx_chan;
+
+	struct sh_dmae_slave	tx_slave;
+	struct sh_dmae_slave	rx_slave;
+};
+
+#define USBHS_MAX_NUM_DFIFO	4
+struct usbhs_fifo_info {
+	struct usbhs_fifo cfifo;
+	struct usbhs_fifo dfifo[USBHS_MAX_NUM_DFIFO];
+};
+#define usbhsf_get_dnfifo(p, n)	(&((p)->fifo_info.dfifo[n]))
+#define usbhs_for_each_dfifo(priv, dfifo, i)			\
+	for ((i) = 0;						\
+	     ((i) < USBHS_MAX_NUM_DFIFO) &&			\
+		     ((dfifo) = usbhsf_get_dnfifo(priv, (i)));	\
+	     (i)++)
+
+struct usbhs_pkt_handle;
+struct usbhs_pkt {
+	struct list_head node;
+	struct usbhs_pipe *pipe;
+	const struct usbhs_pkt_handle *handler;
+	void (*done)(struct usbhs_priv *priv,
+		     struct usbhs_pkt *pkt);
+	struct work_struct work;
+	dma_addr_t dma;
+	const struct dmaengine_result *dma_result;
+	void *buf;
+	int length;
+	int trans;
+	int actual;
+	int zero;
+	int sequence;
+};
+
+struct usbhs_pkt_handle {
+	int (*prepare)(struct usbhs_pkt *pkt, int *is_done);
+	int (*try_run)(struct usbhs_pkt *pkt, int *is_done);
+	int (*dma_done)(struct usbhs_pkt *pkt, int *is_done);
+};
+
+/*
+ * fifo
+ */
+int usbhs_fifo_probe(struct usbhs_priv *priv);
+void usbhs_fifo_remove(struct usbhs_priv *priv);
+void usbhs_fifo_init(struct usbhs_priv *priv);
+void usbhs_fifo_quit(struct usbhs_priv *priv);
+void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe);
+
+/*
+ * packet info
+ */
+extern const struct usbhs_pkt_handle usbhs_fifo_pio_push_handler;
+extern const struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler;
+extern const struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler;
+
+extern const struct usbhs_pkt_handle usbhs_fifo_dma_push_handler;
+extern const struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler;
+
+extern const struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler;
+extern const struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler;
+
+extern const struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler;
+extern const struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler;
+
+void usbhs_pkt_init(struct usbhs_pkt *pkt);
+void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
+		    void (*done)(struct usbhs_priv *priv,
+				 struct usbhs_pkt *pkt),
+		    void *buf, int len, int zero, int sequence);
+struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt);
+void usbhs_pkt_start(struct usbhs_pipe *pipe);
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe);
+
+#endif /* RENESAS_USB_FIFO_H */
diff --git a/drivers/usb/gadget/rcar/mod.c b/drivers/usb/gadget/rcar/mod.c
new file mode 100644
index 00000000000..f5f8d169e17
--- /dev/null
+++ b/drivers/usb/gadget/rcar/mod.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include "common.h"
+#include "mod.h"
+
+/*
+ *		autonomy
+ *
+ * these functions are used if platform doesn't have external phy.
+ *  -> there is no "notify_hotplug" callback from platform
+ *  -> call "notify_hotplug" by itself
+ *  -> use own interrupt to connect/disconnect
+ *  -> it mean module clock is always ON
+ *             ~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+static int usbhsm_autonomy_irq_vbus(struct usbhs_priv *priv,
+				    struct usbhs_irq_state *irq_state)
+{
+	usbhsc_hotplug(priv);
+
+	return 0;
+}
+
+void usbhs_mod_autonomy_mode(struct usbhs_priv *priv)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	info->irq_vbus = usbhsm_autonomy_irq_vbus;
+
+	usbhs_irq_callback_update(priv, NULL);
+}
+
+/*
+ *		host / gadget functions
+ *
+ * renesas_usbhs host/gadget can register itself by below functions.
+ * these functions are called when probe
+ *
+ */
+void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *mod, int id)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	info->mod[id]	= mod;
+	mod->priv	= priv;
+}
+
+struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+	struct usbhs_mod *ret = NULL;
+
+	switch (id) {
+	case USBHS_HOST:
+	case USBHS_GADGET:
+		ret = info->mod[id];
+		break;
+	}
+
+	return ret;
+}
+
+int usbhs_mod_is_host(struct usbhs_priv *priv)
+{
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	if (!mod)
+		return -EINVAL;
+
+	return info->mod[USBHS_HOST] == mod;
+}
+
+struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	return info->curt;
+}
+
+int usbhs_mod_change(struct usbhs_priv *priv, int id)
+{
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+	struct usbhs_mod *mod = NULL;
+	int ret = 0;
+
+	/* id < 0 mean no current */
+	switch (id) {
+	case USBHS_HOST:
+	case USBHS_GADGET:
+		mod = info->mod[id];
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	info->curt = mod;
+
+	return ret;
+}
+
+irqreturn_t usbhs_interrupt(int irq, void *data);
+int usbhs_mod_probe(struct usbhs_priv *priv)
+{
+	int ret;
+
+	/*
+	 * install host/gadget driver
+	 */
+	ret = usbhs_mod_host_probe(priv);
+	if (ret < 0)
+		return ret;
+
+	ret = usbhs_mod_gadget_probe(priv);
+	if (ret < 0)
+		goto mod_init_host_err;
+
+	return ret;
+
+mod_init_host_err:
+	usbhs_mod_host_remove(priv);
+
+	return ret;
+}
+
+void usbhs_mod_remove(struct usbhs_priv *priv)
+{
+	usbhs_mod_host_remove(priv);
+	usbhs_mod_gadget_remove(priv);
+}
+
+/*
+ *		status functions
+ */
+int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state)
+{
+	return (int)irq_state->intsts0 & DVSQ_MASK;
+}
+
+int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state)
+{
+	/*
+	 * return value
+	 *
+	 * IDLE_SETUP_STAGE
+	 * READ_DATA_STAGE
+	 * READ_STATUS_STAGE
+	 * WRITE_DATA_STAGE
+	 * WRITE_STATUS_STAGE
+	 * NODATA_STATUS_STAGE
+	 * SEQUENCE_ERROR
+	 */
+	return (int)irq_state->intsts0 & CTSQ_MASK;
+}
+
+static int usbhs_status_get_each_irq(struct usbhs_priv *priv,
+				     struct usbhs_irq_state *state)
+{
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	u16 intenb0, intenb1;
+	unsigned long flags;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+	state->intsts0 = usbhs_read(priv, INTSTS0);
+	intenb0 = usbhs_read(priv, INTENB0);
+
+	if (usbhs_mod_is_host(priv)) {
+		state->intsts1 = usbhs_read(priv, INTSTS1);
+		intenb1 = usbhs_read(priv, INTENB1);
+	} else {
+		state->intsts1 = intenb1 = 0;
+	}
+
+	/* mask */
+	if (mod) {
+		state->brdysts = usbhs_read(priv, BRDYSTS);
+		state->nrdysts = usbhs_read(priv, NRDYSTS);
+		state->bempsts = usbhs_read(priv, BEMPSTS);
+
+		state->bempsts &= mod->irq_bempsts;
+		state->brdysts &= mod->irq_brdysts;
+	}
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	return 0;
+}
+
+/*
+ *		interrupt
+ */
+#define INTSTS0_MAGIC 0xF800 /* acknowledge magical interrupt sources */
+#define INTSTS1_MAGIC 0xA870 /* acknowledge magical interrupt sources */
+irqreturn_t usbhs_interrupt(int irq, void *data)
+{
+	struct usbhs_priv *priv = data;
+	struct usbhs_irq_state irq_state;
+
+	if (usbhs_status_get_each_irq(priv, &irq_state) < 0)
+		return IRQ_NONE;
+
+	/*
+	 * clear interrupt
+	 *
+	 * The hardware is _very_ picky to clear interrupt bit.
+	 * Especially INTSTS0_MAGIC, INTSTS1_MAGIC value.
+	 *
+	 * see
+	 *	"Operation"
+	 *	 - "Control Transfer (DCP)"
+	 *	   - Function :: VALID bit should 0
+	 */
+	usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC);
+	if (usbhs_mod_is_host(priv))
+		usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC);
+
+	/*
+	 * The driver should not clear the xxxSTS after the line of
+	 * "call irq callback functions" because each "if" statement is
+	 * possible to call the callback function for avoiding any side effects.
+	 */
+	if (irq_state.intsts0 & BRDY)
+		usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
+	usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts);
+	if (irq_state.intsts0 & BEMP)
+		usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
+
+	/*
+	 * call irq callback functions
+	 * see also
+	 *	usbhs_irq_setting_update
+	 */
+
+	/* INTSTS0 */
+	if (irq_state.intsts0 & VBINT)
+		usbhs_mod_info_call(priv, irq_vbus, priv, &irq_state);
+
+	if (irq_state.intsts0 & DVST)
+		usbhs_mod_call(priv, irq_dev_state, priv, &irq_state);
+
+	if (irq_state.intsts0 & CTRT)
+		usbhs_mod_call(priv, irq_ctrl_stage, priv, &irq_state);
+
+	if (irq_state.intsts0 & BEMP)
+		usbhs_mod_call(priv, irq_empty, priv, &irq_state);
+
+	if (irq_state.intsts0 & BRDY)
+		usbhs_mod_call(priv, irq_ready, priv, &irq_state);
+
+	if (usbhs_mod_is_host(priv)) {
+		/* INTSTS1 */
+		if (irq_state.intsts1 & ATTCH)
+			usbhs_mod_call(priv, irq_attch, priv, &irq_state);
+
+		if (irq_state.intsts1 & DTCH)
+			usbhs_mod_call(priv, irq_dtch, priv, &irq_state);
+
+		if (irq_state.intsts1 & SIGN)
+			usbhs_mod_call(priv, irq_sign, priv, &irq_state);
+
+		if (irq_state.intsts1 & SACK)
+			usbhs_mod_call(priv, irq_sack, priv, &irq_state);
+	}
+	return IRQ_HANDLED;
+}
+
+void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod)
+{
+	u16 intenb0 = 0;
+	u16 intenb1 = 0;
+	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
+
+	/*
+	 * BEMPENB/BRDYENB are picky.
+	 * below method is required
+	 *
+	 *  - clear  INTSTS0
+	 *  - update BEMPENB/BRDYENB
+	 *  - update INTSTS0
+	 */
+	usbhs_write(priv, INTENB0, 0);
+	if (usbhs_mod_is_host(priv))
+		usbhs_write(priv, INTENB1, 0);
+
+	usbhs_write(priv, BEMPENB, 0);
+	usbhs_write(priv, BRDYENB, 0);
+
+	/*
+	 * see also
+	 *	usbhs_interrupt
+	 */
+
+	if (info->irq_vbus)
+		intenb0 |= VBSE;
+
+	if (mod) {
+		/*
+		 * INTSTS0
+		 */
+		if (mod->irq_ctrl_stage)
+			intenb0 |= CTRE;
+
+		if (mod->irq_dev_state)
+			intenb0 |= DVSE;
+
+		if (mod->irq_empty && mod->irq_bempsts) {
+			usbhs_write(priv, BEMPENB, mod->irq_bempsts);
+			intenb0 |= BEMPE;
+		}
+
+		if (mod->irq_ready && mod->irq_brdysts) {
+			usbhs_write(priv, BRDYENB, mod->irq_brdysts);
+			intenb0 |= BRDYE;
+		}
+
+		if (usbhs_mod_is_host(priv)) {
+			/*
+			 * INTSTS1
+			 */
+			if (mod->irq_attch)
+				intenb1 |= ATTCHE;
+
+			if (mod->irq_dtch)
+				intenb1 |= DTCHE;
+
+			if (mod->irq_sign)
+				intenb1 |= SIGNE;
+
+			if (mod->irq_sack)
+				intenb1 |= SACKE;
+		}
+	}
+
+	if (intenb0)
+		usbhs_write(priv, INTENB0, intenb0);
+
+	if (usbhs_mod_is_host(priv) && intenb1)
+		usbhs_write(priv, INTENB1, intenb1);
+}
diff --git a/drivers/usb/gadget/rcar/mod.h b/drivers/usb/gadget/rcar/mod.h
new file mode 100644
index 00000000000..b670e950a28
--- /dev/null
+++ b/drivers/usb/gadget/rcar/mod.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-1.0+ */
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#ifndef RENESAS_USB_MOD_H
+#define RENESAS_USB_MOD_H
+
+#include "common.h"
+
+/*
+ *	struct
+ */
+struct usbhs_irq_state {
+	u16 intsts0;
+	u16 intsts1;
+	u16 brdysts;
+	u16 nrdysts;
+	u16 bempsts;
+};
+
+struct usbhs_mod {
+	char *name;
+
+	/*
+	 * entry point from common.c
+	 */
+	int (*start)(struct usbhs_priv *priv);
+	int (*stop)(struct usbhs_priv *priv);
+
+	/*
+	 * INTSTS0
+	 */
+
+	/* DVST (DVSQ) */
+	int (*irq_dev_state)(struct usbhs_priv *priv,
+			     struct usbhs_irq_state *irq_state);
+
+	/* CTRT (CTSQ) */
+	int (*irq_ctrl_stage)(struct usbhs_priv *priv,
+			      struct usbhs_irq_state *irq_state);
+
+	/* BEMP / BEMPSTS */
+	int (*irq_empty)(struct usbhs_priv *priv,
+			 struct usbhs_irq_state *irq_state);
+	u16 irq_bempsts;
+
+	/* BRDY / BRDYSTS */
+	int (*irq_ready)(struct usbhs_priv *priv,
+			 struct usbhs_irq_state *irq_state);
+	u16 irq_brdysts;
+
+	/*
+	 * INTSTS1
+	 */
+
+	/* ATTCHE */
+	int (*irq_attch)(struct usbhs_priv *priv,
+			 struct usbhs_irq_state *irq_state);
+
+	/* DTCHE */
+	int (*irq_dtch)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+
+	/* SIGN */
+	int (*irq_sign)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+
+	/* SACK */
+	int (*irq_sack)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+
+	struct usbhs_priv *priv;
+};
+
+struct usbhs_mod_info {
+	struct usbhs_mod *mod[USBHS_MAX];
+	struct usbhs_mod *curt; /* current mod */
+
+	/*
+	 * INTSTS0 :: VBINT
+	 *
+	 * This function will be used as autonomy mode (runtime_pwctrl == 0)
+	 * when the platform doesn't have own get_vbus function.
+	 *
+	 * This callback cannot be member of "struct usbhs_mod" because it
+	 * will be used even though host/gadget has not been selected.
+	 */
+	int (*irq_vbus)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+};
+
+/*
+ *		for host/gadget module
+ */
+struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id);
+struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv);
+void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *usb, int id);
+int usbhs_mod_is_host(struct usbhs_priv *priv);
+int usbhs_mod_change(struct usbhs_priv *priv, int id);
+int usbhs_mod_probe(struct usbhs_priv *priv);
+void usbhs_mod_remove(struct usbhs_priv *priv);
+
+void usbhs_mod_autonomy_mode(struct usbhs_priv *priv);
+void usbhs_mod_non_autonomy_mode(struct usbhs_priv *priv);
+
+/*
+ *		status functions
+ */
+int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state);
+int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state);
+
+/*
+ *		callback functions
+ */
+void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod);
+
+irqreturn_t usbhs_interrupt(int irq, void *data);
+
+#define usbhs_mod_call(priv, func, param...)		\
+	({						\
+		struct usbhs_mod *mod;			\
+		mod = usbhs_mod_get_current(priv);	\
+		!mod		? -ENODEV :		\
+		!mod->func	? 0 :			\
+		 mod->func(param);			\
+	})
+
+#define usbhs_priv_to_modinfo(priv) (&priv->mod_info)
+#define usbhs_mod_info_call(priv, func, param...)	\
+({							\
+	struct usbhs_mod_info *info;			\
+	info = usbhs_priv_to_modinfo(priv);		\
+	!info->func ? 0 :				\
+	 info->func(param);				\
+})
+
+/*
+ * host / gadget control
+ */
+#if	defined(CONFIG_USB_RENESAS_USBHS_HCD) || \
+	defined(CONFIG_USB_RENESAS_USBHS_HCD_MODULE)
+extern int usbhs_mod_host_probe(struct usbhs_priv *priv);
+extern int usbhs_mod_host_remove(struct usbhs_priv *priv);
+#else
+static inline int usbhs_mod_host_probe(struct usbhs_priv *priv)
+{
+	return 0;
+}
+static inline void usbhs_mod_host_remove(struct usbhs_priv *priv)
+{
+}
+#endif
+
+extern int usbhs_mod_gadget_probe(struct usbhs_priv *priv);
+extern void usbhs_mod_gadget_remove(struct usbhs_priv *priv);
+
+#endif /* RENESAS_USB_MOD_H */
diff --git a/drivers/usb/gadget/rcar/mod_gadget.c b/drivers/usb/gadget/rcar/mod_gadget.c
new file mode 100644
index 00000000000..bd9855eb4fa
--- /dev/null
+++ b/drivers/usb/gadget/rcar/mod_gadget.c
@@ -0,0 +1,1136 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include "common.h"
+
+/*
+ *		struct
+ */
+struct usbhsg_request {
+	struct usb_request	req;
+	struct usbhs_pkt	pkt;
+};
+
+#define EP_NAME_SIZE 8
+struct usbhsg_gpriv;
+struct usbhsg_uep {
+	struct usb_ep		 ep;
+	struct usbhs_pipe	*pipe;
+	spinlock_t		lock;	/* protect the pipe */
+
+	char ep_name[EP_NAME_SIZE];
+
+	struct usbhsg_gpriv *gpriv;
+};
+
+struct usbhsg_gpriv {
+	struct usb_gadget	 gadget;
+	struct usbhs_mod	 mod;
+
+	struct usbhsg_uep	*uep;
+	int			 uep_size;
+
+	struct usb_gadget_driver	*driver;
+	bool			 vbus_active;
+
+	u32	status;
+#define USBHSG_STATUS_STARTED		(1 << 0)
+#define USBHSG_STATUS_REGISTERD		(1 << 1)
+#define USBHSG_STATUS_WEDGE		(1 << 2)
+#define USBHSG_STATUS_SELF_POWERED	(1 << 3)
+#define USBHSG_STATUS_SOFT_CONNECT	(1 << 4)
+};
+
+struct usbhsg_recip_handle {
+	char *name;
+	int (*device)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
+		      struct usb_ctrlrequest *ctrl);
+	int (*interface)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
+			 struct usb_ctrlrequest *ctrl);
+	int (*endpoint)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
+			struct usb_ctrlrequest *ctrl);
+};
+
+/*
+ *		macro
+ */
+#define usbhsg_priv_to_gpriv(priv)			\
+	container_of(					\
+		usbhs_mod_get(priv, USBHS_GADGET),	\
+		struct usbhsg_gpriv, mod)
+
+#define __usbhsg_for_each_uep(start, pos, g, i)	\
+	for ((i) = start;					\
+	     ((i) < (g)->uep_size) && ((pos) = (g)->uep + (i));	\
+	     (i)++)
+
+#define usbhsg_for_each_uep(pos, gpriv, i)	\
+	__usbhsg_for_each_uep(1, pos, gpriv, i)
+
+#define usbhsg_for_each_uep_with_dcp(pos, gpriv, i)	\
+	__usbhsg_for_each_uep(0, pos, gpriv, i)
+
+#define usbhsg_gadget_to_gpriv(g)\
+	container_of(g, struct usbhsg_gpriv, gadget)
+
+#define usbhsg_req_to_ureq(r)\
+	container_of(r, struct usbhsg_request, req)
+
+#define usbhsg_ep_to_uep(e)		container_of(e, struct usbhsg_uep, ep)
+#define usbhsg_gpriv_to_dev(gp)		usbhs_priv_to_dev((gp)->mod.priv)
+#define usbhsg_gpriv_to_priv(gp)	((gp)->mod.priv)
+#define usbhsg_gpriv_to_dcp(gp)		((gp)->uep)
+#define usbhsg_gpriv_to_nth_uep(gp, i)	((gp)->uep + i)
+#define usbhsg_uep_to_gpriv(u)		((u)->gpriv)
+#define usbhsg_uep_to_pipe(u)		((u)->pipe)
+#define usbhsg_pipe_to_uep(p)		((p)->mod_private)
+#define usbhsg_is_dcp(u)		((u) == usbhsg_gpriv_to_dcp((u)->gpriv))
+
+#define usbhsg_ureq_to_pkt(u)		(&(u)->pkt)
+#define usbhsg_pkt_to_ureq(i)	\
+	container_of(i, struct usbhsg_request, pkt)
+
+#define usbhsg_is_not_connected(gp) ((gp)->gadget.speed == USB_SPEED_UNKNOWN)
+
+/* status */
+#define usbhsg_status_init(gp)   do {(gp)->status = 0; } while (0)
+#define usbhsg_status_set(gp, b) (gp->status |=  b)
+#define usbhsg_status_clr(gp, b) (gp->status &= ~b)
+#define usbhsg_status_has(gp, b) (gp->status &   b)
+
+/*
+ *		queue push/pop
+ */
+static void __usbhsg_queue_pop(struct usbhsg_uep *uep,
+			       struct usbhsg_request *ureq,
+			       int status)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+
+	if (pipe)
+		dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe));
+
+	ureq->req.status = status;
+	spin_unlock(usbhs_priv_to_lock(priv));
+	usb_gadget_giveback_request(&uep->ep, &ureq->req);
+	spin_lock(usbhs_priv_to_lock(priv));
+}
+
+static void usbhsg_queue_pop(struct usbhsg_uep *uep,
+			     struct usbhsg_request *ureq,
+			     int status)
+{
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
+	__usbhsg_queue_pop(uep, ureq, status);
+	usbhs_unlock(priv, flags);
+}
+
+static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe);
+	struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt);
+	unsigned long flags;
+
+	ureq->req.actual = pkt->actual;
+
+	usbhs_lock(priv, flags);
+	if (uep)
+		__usbhsg_queue_pop(uep, ureq, 0);
+	usbhs_unlock(priv, flags);
+}
+
+static void usbhsg_queue_push(struct usbhsg_uep *uep,
+			      struct usbhsg_request *ureq)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct usbhs_pkt *pkt = usbhsg_ureq_to_pkt(ureq);
+	struct usb_request *req = &ureq->req;
+
+	req->actual = 0;
+	req->status = -EINPROGRESS;
+	usbhs_pkt_push(pipe, pkt, usbhsg_queue_done,
+		       req->buf, req->length, req->zero, -1);
+	usbhs_pkt_start(pipe);
+
+	dev_dbg(dev, "pipe %d : queue push (%d)\n",
+		usbhs_pipe_number(pipe),
+		req->length);
+}
+
+/*
+ *		dma map/unmap
+ */
+static int usbhsg_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
+{
+	return -1;
+}
+
+/*
+ *		USB_TYPE_STANDARD / clear feature functions
+ */
+static int usbhsg_recip_handler_std_control_done(struct usbhs_priv *priv,
+						 struct usbhsg_uep *uep,
+						 struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp);
+
+	usbhs_dcp_control_transfer_done(pipe);
+
+	return 0;
+}
+
+static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv,
+						   struct usbhsg_uep *uep,
+						   struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+
+	if (!usbhsg_status_has(gpriv, USBHSG_STATUS_WEDGE)) {
+		usbhs_pipe_disable(pipe);
+		usbhs_pipe_sequence_data0(pipe);
+		usbhs_pipe_enable(pipe);
+	}
+
+	usbhsg_recip_handler_std_control_done(priv, uep, ctrl);
+
+	usbhs_pkt_start(pipe);
+
+	return 0;
+}
+
+static struct usbhsg_recip_handle req_clear_feature = {
+	.name		= "clear feature",
+	.device		= usbhsg_recip_handler_std_control_done,
+	.interface	= usbhsg_recip_handler_std_control_done,
+	.endpoint	= usbhsg_recip_handler_std_clear_endpoint,
+};
+
+/*
+ *		USB_TYPE_STANDARD / set feature functions
+ */
+static int usbhsg_recip_handler_std_set_device(struct usbhs_priv *priv,
+						 struct usbhsg_uep *uep,
+						 struct usb_ctrlrequest *ctrl)
+{
+	switch (le16_to_cpu(ctrl->wValue)) {
+	case USB_DEVICE_TEST_MODE:
+		usbhsg_recip_handler_std_control_done(priv, uep, ctrl);
+		udelay(100);
+		usbhs_sys_set_test_mode(priv, le16_to_cpu(ctrl->wIndex) >> 8);
+		break;
+	default:
+		usbhsg_recip_handler_std_control_done(priv, uep, ctrl);
+		break;
+	}
+
+	return 0;
+}
+
+static int usbhsg_recip_handler_std_set_endpoint(struct usbhs_priv *priv,
+						 struct usbhsg_uep *uep,
+						 struct usb_ctrlrequest *ctrl)
+{
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+
+	usbhs_pipe_stall(pipe);
+
+	usbhsg_recip_handler_std_control_done(priv, uep, ctrl);
+
+	return 0;
+}
+
+static struct usbhsg_recip_handle req_set_feature = {
+	.name		= "set feature",
+	.device		= usbhsg_recip_handler_std_set_device,
+	.interface	= usbhsg_recip_handler_std_control_done,
+	.endpoint	= usbhsg_recip_handler_std_set_endpoint,
+};
+
+/*
+ *		USB_TYPE_STANDARD / get status functions
+ */
+static void __usbhsg_recip_send_complete(struct usb_ep *ep,
+					 struct usb_request *req)
+{
+	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
+
+	/* free allocated recip-buffer/usb_request */
+	kfree(ureq->pkt.buf);
+	usb_ep_free_request(ep, req);
+}
+
+static void __usbhsg_recip_send_status(struct usbhsg_gpriv *gpriv,
+				       unsigned short status)
+{
+	struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usb_request *req;
+	__le16 *buf;
+
+	/* alloc new usb_request for recip */
+	req = usb_ep_alloc_request(&dcp->ep, GFP_ATOMIC);
+	if (!req) {
+		dev_err(dev, "recip request allocation fail\n");
+		return;
+	}
+
+	/* alloc recip data buffer */
+	buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
+	if (!buf) {
+		usb_ep_free_request(&dcp->ep, req);
+		return;
+	}
+
+	/* recip data is status */
+	*buf = cpu_to_le16(status);
+
+	/* allocated usb_request/buffer will be freed */
+	req->complete	= __usbhsg_recip_send_complete;
+	req->buf	= buf;
+	req->length	= sizeof(*buf);
+	req->zero	= 0;
+
+	/* push packet */
+	pipe->handler = &usbhs_fifo_pio_push_handler;
+	usbhsg_queue_push(dcp, usbhsg_req_to_ureq(req));
+}
+
+static int usbhsg_recip_handler_std_get_device(struct usbhs_priv *priv,
+					       struct usbhsg_uep *uep,
+					       struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	unsigned short status = 0;
+
+	if (usbhsg_status_has(gpriv, USBHSG_STATUS_SELF_POWERED))
+		status = 1 << USB_DEVICE_SELF_POWERED;
+
+	__usbhsg_recip_send_status(gpriv, status);
+
+	return 0;
+}
+
+static int usbhsg_recip_handler_std_get_interface(struct usbhs_priv *priv,
+						  struct usbhsg_uep *uep,
+						  struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	unsigned short status = 0;
+
+	__usbhsg_recip_send_status(gpriv, status);
+
+	return 0;
+}
+
+static int usbhsg_recip_handler_std_get_endpoint(struct usbhs_priv *priv,
+						 struct usbhsg_uep *uep,
+						 struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	unsigned short status = 0;
+
+	if (usbhs_pipe_is_stall(pipe))
+		status = 1 << USB_ENDPOINT_HALT;
+
+	__usbhsg_recip_send_status(gpriv, status);
+
+	return 0;
+}
+
+static struct usbhsg_recip_handle req_get_status = {
+	.name		= "get status",
+	.device		= usbhsg_recip_handler_std_get_device,
+	.interface	= usbhsg_recip_handler_std_get_interface,
+	.endpoint	= usbhsg_recip_handler_std_get_endpoint,
+};
+
+/*
+ *		USB_TYPE handler
+ */
+static int usbhsg_recip_run_handle(struct usbhs_priv *priv,
+				   struct usbhsg_recip_handle *handler,
+				   struct usb_ctrlrequest *ctrl)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usbhsg_uep *uep;
+	struct usbhs_pipe *pipe;
+	int recip = ctrl->bRequestType & USB_RECIP_MASK;
+	int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+	int ret = 0;
+	int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
+		    struct usb_ctrlrequest *ctrl);
+	char *msg;
+
+	uep = usbhsg_gpriv_to_nth_uep(gpriv, nth);
+	pipe = usbhsg_uep_to_pipe(uep);
+	if (!pipe) {
+		dev_err(dev, "wrong recip request\n");
+		return -EINVAL;
+	}
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		msg	= "DEVICE";
+		func	= handler->device;
+		break;
+	case USB_RECIP_INTERFACE:
+		msg	= "INTERFACE";
+		func	= handler->interface;
+		break;
+	case USB_RECIP_ENDPOINT:
+		msg	= "ENDPOINT";
+		func	= handler->endpoint;
+		break;
+	default:
+		dev_warn(dev, "unsupported RECIP(%d)\n", recip);
+		func = NULL;
+		ret = -EINVAL;
+	}
+
+	if (func) {
+		dev_dbg(dev, "%s (pipe %d :%s)\n", handler->name, nth, msg);
+		ret = func(priv, uep, ctrl);
+	}
+
+	return ret;
+}
+
+/*
+ *		irq functions
+ *
+ * it will be called from usbhs_interrupt
+ */
+static int usbhsg_irq_dev_state(struct usbhs_priv *priv,
+				struct usbhs_irq_state *irq_state)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	int state = usbhs_status_get_device_state(irq_state);
+
+	gpriv->gadget.speed = usbhs_bus_get_speed(priv);
+
+	dev_dbg(dev, "state = %x : speed : %d\n", state, gpriv->gadget.speed);
+
+	if (gpriv->gadget.speed != USB_SPEED_UNKNOWN &&
+	    (state & SUSPENDED_STATE)) {
+		if (gpriv->driver && gpriv->driver->suspend)
+			gpriv->driver->suspend(&gpriv->gadget);
+		usb_gadget_set_state(&gpriv->gadget, USB_STATE_SUSPENDED);
+	}
+
+	return 0;
+}
+
+static int usbhsg_irq_ctrl_stage(struct usbhs_priv *priv,
+				 struct usbhs_irq_state *irq_state)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usb_ctrlrequest ctrl;
+	struct usbhsg_recip_handle *recip_handler = NULL;
+	int stage = usbhs_status_get_ctrl_stage(irq_state);
+	int ret = 0;
+
+	dev_dbg(dev, "stage = %d\n", stage);
+
+	/*
+	 * see Manual
+	 *
+	 *  "Operation"
+	 *  - "Interrupt Function"
+	 *    - "Control Transfer Stage Transition Interrupt"
+	 *      - Fig. "Control Transfer Stage Transitions"
+	 */
+
+	switch (stage) {
+	case READ_DATA_STAGE:
+		pipe->handler = &usbhs_fifo_pio_push_handler;
+		break;
+	case WRITE_DATA_STAGE:
+		pipe->handler = &usbhs_fifo_pio_pop_handler;
+		break;
+	case NODATA_STATUS_STAGE:
+		pipe->handler = &usbhs_ctrl_stage_end_handler;
+		break;
+	case READ_STATUS_STAGE:
+	case WRITE_STATUS_STAGE:
+		usbhs_dcp_control_transfer_done(pipe);
+		fallthrough;
+	default:
+		return ret;
+	}
+
+	/*
+	 * get usb request
+	 */
+	usbhs_usbreq_get_val(priv, &ctrl);
+
+	switch (ctrl.bRequestType & USB_TYPE_MASK) {
+	case USB_TYPE_STANDARD:
+		switch (ctrl.bRequest) {
+		case USB_REQ_CLEAR_FEATURE:
+			recip_handler = &req_clear_feature;
+			break;
+		case USB_REQ_SET_FEATURE:
+			recip_handler = &req_set_feature;
+			break;
+		case USB_REQ_GET_STATUS:
+			recip_handler = &req_get_status;
+			break;
+		}
+	}
+
+	/*
+	 * setup stage / run recip
+	 */
+	if (recip_handler)
+		ret = usbhsg_recip_run_handle(priv, recip_handler, &ctrl);
+	else
+		ret = gpriv->driver->setup(&gpriv->gadget, &ctrl);
+
+	if (ret < 0)
+		usbhs_pipe_stall(pipe);
+
+	return ret;
+}
+
+/*
+ *
+ *		usb_dcp_ops
+ *
+ */
+static int usbhsg_pipe_disable(struct usbhsg_uep *uep)
+{
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct usbhs_pkt *pkt;
+
+	while (1) {
+		pkt = usbhs_pkt_pop(pipe, NULL);
+		if (!pkt)
+			break;
+
+		usbhsg_queue_pop(uep, usbhsg_pkt_to_ureq(pkt), -ESHUTDOWN);
+	}
+
+	usbhs_pipe_disable(pipe);
+
+	return 0;
+}
+
+/*
+ *
+ *		usb_ep_ops
+ *
+ */
+static int usbhsg_ep_enable(struct usb_ep *ep,
+			 const struct usb_endpoint_descriptor *desc)
+{
+	struct usbhsg_uep *uep   = usbhsg_ep_to_uep(ep);
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+	struct usbhs_pipe *pipe;
+	int ret = -EIO;
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
+
+	/*
+	 * if it already have pipe,
+	 * nothing to do
+	 */
+	if (uep->pipe) {
+		usbhs_pipe_clear(uep->pipe);
+		usbhs_pipe_sequence_data0(uep->pipe);
+		ret = 0;
+		goto usbhsg_ep_enable_end;
+	}
+
+	pipe = usbhs_pipe_malloc(priv,
+				 usb_endpoint_type(desc),
+				 usb_endpoint_dir_in(desc));
+	if (pipe) {
+		uep->pipe		= pipe;
+		pipe->mod_private	= uep;
+
+		/* set epnum / maxp */
+		usbhs_pipe_config_update(pipe, 0,
+					 usb_endpoint_num(desc),
+					 usb_endpoint_maxp(desc));
+
+		/*
+		 * usbhs_fifo_dma_push/pop_handler try to
+		 * use dmaengine if possible.
+		 * It will use pio handler if impossible.
+		 */
+		if (usb_endpoint_dir_in(desc)) {
+			pipe->handler = &usbhs_fifo_dma_push_handler;
+		} else {
+			pipe->handler = &usbhs_fifo_dma_pop_handler;
+			usbhs_xxxsts_clear(priv, BRDYSTS,
+					   usbhs_pipe_number(pipe));
+		}
+
+		ret = 0;
+	}
+
+usbhsg_ep_enable_end:
+	usbhs_unlock(priv, flags);
+
+	return ret;
+}
+
+static int usbhsg_ep_disable(struct usb_ep *ep)
+{
+	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
+	struct usbhs_pipe *pipe;
+	unsigned long flags;
+
+	spin_lock_irqsave(&uep->lock, flags);
+	pipe = usbhsg_uep_to_pipe(uep);
+	if (!pipe)
+		goto out;
+
+	usbhsg_pipe_disable(uep);
+	usbhs_pipe_free(pipe);
+
+	uep->pipe->mod_private	= NULL;
+	uep->pipe		= NULL;
+
+out:
+	spin_unlock_irqrestore(&uep->lock, flags);
+
+	return 0;
+}
+
+static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep,
+						   gfp_t gfp_flags)
+{
+	struct usbhsg_request *ureq;
+
+	ureq = kzalloc(sizeof *ureq, gfp_flags);
+	if (!ureq)
+		return NULL;
+
+	usbhs_pkt_init(usbhsg_ureq_to_pkt(ureq));
+
+	return &ureq->req;
+}
+
+static void usbhsg_ep_free_request(struct usb_ep *ep,
+				   struct usb_request *req)
+{
+	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
+
+	WARN_ON(!list_empty(&ureq->pkt.node));
+	kfree(ureq);
+}
+
+static int usbhsg_ep_queue(struct usb_ep *ep, struct usb_request *req,
+			  gfp_t gfp_flags)
+{
+	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+
+	/* param check */
+	if (usbhsg_is_not_connected(gpriv)	||
+	    unlikely(!gpriv->driver)		||
+	    unlikely(!pipe))
+		return -ESHUTDOWN;
+
+	usbhsg_queue_push(uep, ureq);
+
+	return 0;
+}
+
+static int usbhsg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
+	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
+	struct usbhs_pipe *pipe;
+	unsigned long flags;
+
+	spin_lock_irqsave(&uep->lock, flags);
+	pipe = usbhsg_uep_to_pipe(uep);
+	if (pipe)
+		usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq));
+
+	/*
+	 * To dequeue a request, this driver should call the usbhsg_queue_pop()
+	 * even if the pipe is NULL.
+	 */
+	usbhsg_queue_pop(uep, ureq, -ECONNRESET);
+	spin_unlock_irqrestore(&uep->lock, flags);
+
+	return 0;
+}
+
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe);
+static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge)
+{
+	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	unsigned long flags;
+	int ret = 0;
+
+	dev_dbg(dev, "set halt %d (pipe %d)\n",
+		halt, usbhs_pipe_number(pipe));
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	/*
+	 * According to usb_ep_set_halt()'s description, this function should
+	 * return -EAGAIN if the IN endpoint has any queue or data. Note
+	 * that the usbhs_pipe_is_dir_in() returns false if the pipe is an
+	 * IN endpoint in the gadget mode.
+	 */
+	if (!usbhs_pipe_is_dir_in(pipe) && (__usbhsf_pkt_get(pipe) ||
+	    usbhs_pipe_contains_transmittable_data(pipe))) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	if (halt)
+		usbhs_pipe_stall(pipe);
+	else
+		usbhs_pipe_disable(pipe);
+
+	if (halt && wedge)
+		usbhsg_status_set(gpriv, USBHSG_STATUS_WEDGE);
+	else
+		usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE);
+
+out:
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	return ret;
+}
+
+static int usbhsg_ep_set_halt(struct usb_ep *ep, int value)
+{
+	return __usbhsg_ep_set_halt_wedge(ep, value, 0);
+}
+
+static int usbhsg_ep_set_wedge(struct usb_ep *ep)
+{
+	return __usbhsg_ep_set_halt_wedge(ep, 1, 1);
+}
+
+static const struct usb_ep_ops usbhsg_ep_ops = {
+	.enable		= usbhsg_ep_enable,
+	.disable	= usbhsg_ep_disable,
+
+	.alloc_request	= usbhsg_ep_alloc_request,
+	.free_request	= usbhsg_ep_free_request,
+
+	.queue		= usbhsg_ep_queue,
+	.dequeue	= usbhsg_ep_dequeue,
+
+	.set_halt	= usbhsg_ep_set_halt,
+	.set_wedge	= usbhsg_ep_set_wedge,
+};
+
+/*
+ *		pullup control
+ */
+static int usbhsg_can_pullup(struct usbhs_priv *priv)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+
+	return gpriv->driver &&
+	       usbhsg_status_has(gpriv, USBHSG_STATUS_SOFT_CONNECT);
+}
+
+static void usbhsg_update_pullup(struct usbhs_priv *priv)
+{
+	if (usbhsg_can_pullup(priv))
+		usbhs_sys_function_pullup(priv, 1);
+	else
+		usbhs_sys_function_pullup(priv, 0);
+}
+
+/*
+ *		usb module start/end
+ */
+static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	unsigned long flags;
+	int ret = 0;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	usbhsg_status_set(gpriv, status);
+	if (!(usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) &&
+	      usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD)))
+		ret = -1; /* not ready */
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ********************/
+
+	if (ret < 0)
+		return 0; /* not ready is not error */
+
+	/*
+	 * enable interrupt and systems if ready
+	 */
+	dev_dbg(dev, "start gadget\n");
+
+	/*
+	 * pipe initialize and enable DCP
+	 */
+	usbhs_fifo_init(priv);
+	usbhs_pipe_init(priv,
+			usbhsg_dma_map_ctrl);
+
+	/* dcp init instead of usbhsg_ep_enable() */
+	dcp->pipe		= usbhs_dcp_malloc(priv);
+	dcp->pipe->mod_private	= dcp;
+	usbhs_pipe_config_update(dcp->pipe, 0, 0, 64);
+
+	/*
+	 * system config enble
+	 * - HI speed
+	 * - function
+	 * - usb module
+	 */
+	usbhs_sys_function_ctrl(priv, 1);
+	usbhsg_update_pullup(priv);
+
+	/*
+	 * enable irq callback
+	 */
+	mod->irq_dev_state	= usbhsg_irq_dev_state;
+	mod->irq_ctrl_stage	= usbhsg_irq_ctrl_stage;
+	usbhs_irq_callback_update(priv, mod);
+
+	return 0;
+}
+
+static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct usbhsg_uep *uep;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	unsigned long flags;
+	int ret = 0, i;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	usbhsg_status_clr(gpriv, status);
+	if (!usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) &&
+	    !usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD))
+		ret = -1; /* already done */
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ********************/
+
+	if (ret < 0)
+		return 0; /* already done is not error */
+
+	/*
+	 * disable interrupt and systems if 1st try
+	 */
+	usbhs_fifo_quit(priv);
+
+	/* disable all irq */
+	mod->irq_dev_state	= NULL;
+	mod->irq_ctrl_stage	= NULL;
+	usbhs_irq_callback_update(priv, mod);
+
+	gpriv->gadget.speed = USB_SPEED_UNKNOWN;
+
+	/* disable sys */
+	usbhs_sys_set_test_mode(priv, 0);
+	usbhs_sys_function_ctrl(priv, 0);
+
+	/* disable all eps */
+	usbhsg_for_each_uep_with_dcp(uep, gpriv, i)
+		usbhsg_ep_disable(&uep->ep);
+
+	dev_dbg(dev, "stop gadget\n");
+
+	return 0;
+}
+
+/*
+ * VBUS provided by the PHY
+ */
+static void usbhs_mod_phy_mode(struct usbhs_priv *priv)
+{
+	struct usbhs_mod_info *info = &priv->mod_info;
+
+	info->irq_vbus = NULL;
+
+	usbhs_irq_callback_update(priv, NULL);
+}
+
+/*
+ *
+ *		linux usb function
+ *
+ */
+static int usbhsg_gadget_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+
+	if (!driver || !driver->setup)
+		return -EINVAL;
+
+	/* get vbus using phy versions */
+	usbhs_mod_phy_mode(priv);
+
+	/* first hook up the driver ... */
+	gpriv->driver = driver;
+
+	return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD);
+}
+
+static int usbhsg_gadget_stop(struct usb_gadget *gadget)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+
+	usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD);
+
+	gpriv->driver = NULL;
+
+	return 0;
+}
+
+/*
+ *		usb gadget ops
+ */
+static int usbhsg_get_frame(struct usb_gadget *gadget)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+
+	return usbhs_frame_get_num(priv);
+}
+
+static int usbhsg_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
+	if (is_on)
+		usbhsg_status_set(gpriv, USBHSG_STATUS_SOFT_CONNECT);
+	else
+		usbhsg_status_clr(gpriv, USBHSG_STATUS_SOFT_CONNECT);
+	usbhsg_update_pullup(priv);
+	usbhs_unlock(priv, flags);
+
+	return 0;
+}
+
+static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+
+	if (is_self)
+		usbhsg_status_set(gpriv, USBHSG_STATUS_SELF_POWERED);
+	else
+		usbhsg_status_clr(gpriv, USBHSG_STATUS_SELF_POWERED);
+
+	return 0;
+}
+
+static int usbhsg_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+
+	gpriv->vbus_active = !!is_active;
+
+	usbhsc_hotplug(priv);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops usbhsg_gadget_ops = {
+	.get_frame		= usbhsg_get_frame,
+	.set_selfpowered	= usbhsg_set_selfpowered,
+	.udc_start		= usbhsg_gadget_start,
+	.udc_stop		= usbhsg_gadget_stop,
+	.pullup			= usbhsg_pullup,
+	.vbus_session		= usbhsg_vbus_session,
+};
+
+static int usbhsg_start(struct usbhs_priv *priv)
+{
+	return usbhsg_try_start(priv, USBHSG_STATUS_STARTED);
+}
+
+static int usbhsg_stop(struct usbhs_priv *priv)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+
+	/* cable disconnect */
+	if (gpriv->driver &&
+	    gpriv->driver->disconnect)
+		gpriv->driver->disconnect(&gpriv->gadget);
+
+	return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED);
+}
+
+int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
+{
+	struct usbhsg_gpriv *gpriv;
+	struct usbhsg_uep *uep;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
+	int pipe_size = usbhs_get_dparam(priv, pipe_size);
+	int i;
+	int ret;
+
+	gpriv = kzalloc(sizeof(struct usbhsg_gpriv), GFP_KERNEL);
+	if (!gpriv)
+		return -ENOMEM;
+
+	uep = kcalloc(pipe_size, sizeof(struct usbhsg_uep), GFP_KERNEL);
+	if (!uep) {
+		ret = -ENOMEM;
+		goto usbhs_mod_gadget_probe_err_gpriv;
+	}
+
+	/*
+	 * CAUTION
+	 *
+	 * There is no guarantee that it is possible to access usb module here.
+	 * Don't accesses to it.
+	 * The accesse will be enable after "usbhsg_start"
+	 */
+
+	/*
+	 * register itself
+	 */
+	usbhs_mod_register(priv, &gpriv->mod, USBHS_GADGET);
+
+	/* init gpriv */
+	gpriv->mod.name		= "gadget";
+	gpriv->mod.start	= usbhsg_start;
+	gpriv->mod.stop		= usbhsg_stop;
+	gpriv->uep		= uep;
+	gpriv->uep_size		= pipe_size;
+	usbhsg_status_init(gpriv);
+
+	/*
+	 * init gadget
+	 */
+	gpriv->gadget.dev.parent	= dev;
+	gpriv->gadget.name		= "renesas_usbhs_udc";
+	gpriv->gadget.ops		= &usbhsg_gadget_ops;
+	gpriv->gadget.max_speed		= USB_SPEED_HIGH;
+
+	INIT_LIST_HEAD(&gpriv->gadget.ep_list);
+
+	/*
+	 * init usb_ep
+	 */
+	usbhsg_for_each_uep_with_dcp(uep, gpriv, i) {
+		uep->gpriv	= gpriv;
+		uep->pipe	= NULL;
+		snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i);
+
+		uep->ep.name		= uep->ep_name;
+		uep->ep.ops		= &usbhsg_ep_ops;
+		INIT_LIST_HEAD(&uep->ep.ep_list);
+		spin_lock_init(&uep->lock);
+
+		/* init DCP */
+		if (usbhsg_is_dcp(uep)) {
+			gpriv->gadget.ep0 = &uep->ep;
+			usb_ep_set_maxpacket_limit(&uep->ep, 64);
+			uep->ep.caps.type_control = true;
+		} else {
+			/* init normal pipe */
+			if (pipe_configs[i].type == USB_ENDPOINT_XFER_ISOC)
+				uep->ep.caps.type_iso = true;
+			if (pipe_configs[i].type == USB_ENDPOINT_XFER_BULK)
+				uep->ep.caps.type_bulk = true;
+			if (pipe_configs[i].type == USB_ENDPOINT_XFER_INT)
+				uep->ep.caps.type_int = true;
+			usb_ep_set_maxpacket_limit(&uep->ep,
+						   pipe_configs[i].bufsize);
+			list_add_tail(&uep->ep.ep_list, &gpriv->gadget.ep_list);
+		}
+		uep->ep.caps.dir_in = true;
+		uep->ep.caps.dir_out = true;
+	}
+
+	ret = usb_add_gadget_udc(dev, &gpriv->gadget);
+	if (ret)
+		goto err_add_udc;
+
+
+	dev_info(dev, "gadget probed\n");
+
+	return 0;
+
+err_add_udc:
+	kfree(gpriv->uep);
+
+usbhs_mod_gadget_probe_err_gpriv:
+	kfree(gpriv);
+
+	return ret;
+}
+
+void usbhs_mod_gadget_remove(struct usbhs_priv *priv)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+
+	usb_del_gadget_udc(&gpriv->gadget);
+
+	kfree(gpriv->uep);
+	kfree(gpriv);
+}
+
+struct usb_gadget *usbhsg_get_gadget(struct usbhs_priv *priv)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+	return &gpriv->gadget;
+}
diff --git a/drivers/usb/gadget/rcar/pipe.c b/drivers/usb/gadget/rcar/pipe.c
new file mode 100644
index 00000000000..a2b24f38144
--- /dev/null
+++ b/drivers/usb/gadget/rcar/pipe.c
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#include <linux/delay.h>
+#include "common.h"
+#include "pipe.h"
+
+/*
+ *		macros
+ */
+#define usbhsp_addr_offset(p)	((usbhs_pipe_number(p) - 1) * 2)
+
+#define usbhsp_flags_set(p, f)	((p)->flags |=  USBHS_PIPE_FLAGS_##f)
+#define usbhsp_flags_clr(p, f)	((p)->flags &= ~USBHS_PIPE_FLAGS_##f)
+#define usbhsp_flags_has(p, f)	((p)->flags &   USBHS_PIPE_FLAGS_##f)
+#define usbhsp_flags_init(p)	do {(p)->flags = 0; } while (0)
+
+/*
+ * for debug
+ */
+static char *usbhsp_pipe_name[] = {
+	[USB_ENDPOINT_XFER_CONTROL]	= "DCP",
+	[USB_ENDPOINT_XFER_BULK]	= "BULK",
+	[USB_ENDPOINT_XFER_INT]		= "INT",
+	[USB_ENDPOINT_XFER_ISOC]	= "ISO",
+};
+
+char *usbhs_pipe_name(struct usbhs_pipe *pipe)
+{
+	return usbhsp_pipe_name[usbhs_pipe_type(pipe)];
+}
+
+static struct renesas_usbhs_driver_pipe_config
+*usbhsp_get_pipe_config(struct usbhs_priv *priv, int pipe_num)
+{
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
+
+	return &pipe_configs[pipe_num];
+}
+
+/*
+ *		DCPCTR/PIPEnCTR functions
+ */
+static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int offset = usbhsp_addr_offset(pipe);
+
+	if (usbhs_pipe_is_dcp(pipe))
+		usbhs_bset(priv, DCPCTR, mask, val);
+	else
+		usbhs_bset(priv, PIPEnCTR + offset, mask, val);
+}
+
+static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int offset = usbhsp_addr_offset(pipe);
+
+	if (usbhs_pipe_is_dcp(pipe))
+		return usbhs_read(priv, DCPCTR);
+	else
+		return usbhs_read(priv, PIPEnCTR + offset);
+}
+
+/*
+ *		DCP/PIPE functions
+ */
+static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
+				  u16 dcp_reg, u16 pipe_reg,
+				  u16 mask, u16 val)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	if (usbhs_pipe_is_dcp(pipe))
+		usbhs_bset(priv, dcp_reg, mask, val);
+	else
+		usbhs_bset(priv, pipe_reg, mask, val);
+}
+
+static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe,
+				 u16 dcp_reg, u16 pipe_reg)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	if (usbhs_pipe_is_dcp(pipe))
+		return usbhs_read(priv, dcp_reg);
+	else
+		return usbhs_read(priv, pipe_reg);
+}
+
+/*
+ *		DCPCFG/PIPECFG functions
+ */
+static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	__usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val);
+}
+
+static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe)
+{
+	return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG);
+}
+
+/*
+ *		PIPEnTRN/PIPEnTRE functions
+ */
+static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int num = usbhs_pipe_number(pipe);
+	u16 reg;
+
+	/*
+	 * It is impossible to calculate address,
+	 * since PIPEnTRN addresses were mapped randomly.
+	 */
+#define CASE_PIPExTRN(a)		\
+	case 0x ## a:			\
+		reg = PIPE ## a ## TRN;	\
+		break;
+
+	switch (num) {
+	CASE_PIPExTRN(1);
+	CASE_PIPExTRN(2);
+	CASE_PIPExTRN(3);
+	CASE_PIPExTRN(4);
+	CASE_PIPExTRN(5);
+	CASE_PIPExTRN(B);
+	CASE_PIPExTRN(C);
+	CASE_PIPExTRN(D);
+	CASE_PIPExTRN(E);
+	CASE_PIPExTRN(F);
+	CASE_PIPExTRN(9);
+	CASE_PIPExTRN(A);
+	default:
+		dev_err(dev, "unknown pipe (%d)\n", num);
+		return;
+	}
+	__usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
+}
+
+static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int num = usbhs_pipe_number(pipe);
+	u16 reg;
+
+	/*
+	 * It is impossible to calculate address,
+	 * since PIPEnTRE addresses were mapped randomly.
+	 */
+#define CASE_PIPExTRE(a)			\
+	case 0x ## a:				\
+		reg = PIPE ## a ## TRE;		\
+		break;
+
+	switch (num) {
+	CASE_PIPExTRE(1);
+	CASE_PIPExTRE(2);
+	CASE_PIPExTRE(3);
+	CASE_PIPExTRE(4);
+	CASE_PIPExTRE(5);
+	CASE_PIPExTRE(B);
+	CASE_PIPExTRE(C);
+	CASE_PIPExTRE(D);
+	CASE_PIPExTRE(E);
+	CASE_PIPExTRE(F);
+	CASE_PIPExTRE(9);
+	CASE_PIPExTRE(A);
+	default:
+		dev_err(dev, "unknown pipe (%d)\n", num);
+		return;
+	}
+
+	__usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
+}
+
+/*
+ *		PIPEBUF
+ */
+static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	if (usbhs_pipe_is_dcp(pipe))
+		return;
+
+	__usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val);
+}
+
+/*
+ *		DCPMAXP/PIPEMAXP
+ */
+static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
+{
+	__usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val);
+}
+
+/*
+ *		pipe control functions
+ */
+static void usbhsp_pipe_select(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	/*
+	 * On pipe, this is necessary before
+	 * accesses to below registers.
+	 *
+	 * PIPESEL	: usbhsp_pipe_select
+	 * PIPECFG	: usbhsp_pipe_cfg_xxx
+	 * PIPEBUF	: usbhsp_pipe_buf_xxx
+	 * PIPEMAXP	: usbhsp_pipe_maxp_xxx
+	 * PIPEPERI
+	 */
+
+	/*
+	 * if pipe is dcp, no pipe is selected.
+	 * it is no problem, because dcp have its register
+	 */
+	usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe));
+}
+
+static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int timeout = 1024;
+	u16 mask = usbhs_mod_is_host(priv) ? (CSSTS | PID_MASK) : PID_MASK;
+
+	/*
+	 * make sure....
+	 *
+	 * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is
+	 * specified by the CURPIPE bits.
+	 * When changing the setting of this bit after changing
+	 * the PID bits for the selected pipe from BUF to NAK,
+	 * check that CSSTS = 0 and PBUSY = 0.
+	 */
+
+	/*
+	 * CURPIPE bit = 0
+	 *
+	 * see also
+	 *  "Operation"
+	 *  - "Pipe Control"
+	 *   - "Pipe Control Registers Switching Procedure"
+	 */
+	usbhs_write(priv, CFIFOSEL, 0);
+	usbhs_pipe_disable(pipe);
+
+	do {
+		if (!(usbhsp_pipectrl_get(pipe) & mask))
+			return 0;
+
+		udelay(10);
+
+	} while (timeout--);
+
+	return -EBUSY;
+}
+
+int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe)
+{
+	u16 val;
+
+	val = usbhsp_pipectrl_get(pipe);
+	if (val & BSTS)
+		return 0;
+
+	return -EBUSY;
+}
+
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe)
+{
+	u16 val;
+
+	/* Do not support for DCP pipe */
+	if (usbhs_pipe_is_dcp(pipe))
+		return false;
+
+	val = usbhsp_pipectrl_get(pipe);
+	if (val & INBUFM)
+		return true;
+
+	return false;
+}
+
+/*
+ *		PID ctrl
+ */
+static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe)
+{
+	u16 pid = usbhsp_pipectrl_get(pipe);
+
+	pid &= PID_MASK;
+
+	/*
+	 * see
+	 * "Pipe n Control Register" - "PID"
+	 */
+	switch (pid) {
+	case PID_STALL11:
+		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
+		fallthrough;
+	case PID_STALL10:
+		usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
+	}
+}
+
+void usbhs_pipe_disable(struct usbhs_pipe *pipe)
+{
+	int timeout = 1024;
+	u16 val;
+
+	/* see "Pipe n Control Register" - "PID" */
+	__usbhsp_pid_try_nak_if_stall(pipe);
+
+	usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
+
+	do {
+		val  = usbhsp_pipectrl_get(pipe);
+		val &= PBUSY;
+		if (!val)
+			break;
+
+		udelay(10);
+	} while (timeout--);
+}
+
+void usbhs_pipe_enable(struct usbhs_pipe *pipe)
+{
+	/* see "Pipe n Control Register" - "PID" */
+	__usbhsp_pid_try_nak_if_stall(pipe);
+
+	usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF);
+}
+
+void usbhs_pipe_stall(struct usbhs_pipe *pipe)
+{
+	u16 pid = usbhsp_pipectrl_get(pipe);
+
+	pid &= PID_MASK;
+
+	/*
+	 * see
+	 * "Pipe n Control Register" - "PID"
+	 */
+	switch (pid) {
+	case PID_NAK:
+		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
+		break;
+	case PID_BUF:
+		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11);
+		break;
+	}
+}
+
+int usbhs_pipe_is_stall(struct usbhs_pipe *pipe)
+{
+	u16 pid = usbhsp_pipectrl_get(pipe) & PID_MASK;
+
+	return (int)(pid == PID_STALL10 || pid == PID_STALL11);
+}
+
+void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len)
+{
+	if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+		return;
+
+	/*
+	 * clear and disable transfer counter for IN/OUT pipe
+	 */
+	usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR);
+
+	/*
+	 * Only IN direction bulk pipe can use transfer count.
+	 * Without using this function,
+	 * received data will break if it was large data size.
+	 * see PIPEnTRN/PIPEnTRE for detail
+	 */
+	if (usbhs_pipe_is_dir_in(pipe)) {
+		int maxp = usbhs_pipe_get_maxpacket(pipe);
+
+		usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp));
+		usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */
+	}
+}
+
+
+/*
+ *		pipe setup
+ */
+static int usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, int is_host,
+				int dir_in, u16 *pipecfg)
+{
+	u16 type = 0;
+	u16 bfre = 0;
+	u16 dblb = 0;
+	u16 cntmd = 0;
+	u16 dir = 0;
+	u16 epnum = 0;
+	u16 shtnak = 0;
+	static const u16 type_array[] = {
+		[USB_ENDPOINT_XFER_BULK] = TYPE_BULK,
+		[USB_ENDPOINT_XFER_INT]  = TYPE_INT,
+		[USB_ENDPOINT_XFER_ISOC] = TYPE_ISO,
+	};
+
+	if (usbhs_pipe_is_dcp(pipe))
+		return -EINVAL;
+
+	/*
+	 * PIPECFG
+	 *
+	 * see
+	 *  - "Register Descriptions" - "PIPECFG" register
+	 *  - "Features"  - "Pipe configuration"
+	 *  - "Operation" - "Pipe Control"
+	 */
+
+	/* TYPE */
+	type = type_array[usbhs_pipe_type(pipe)];
+
+	/* BFRE */
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+		bfre = 0; /* FIXME */
+
+	/* DBLB: see usbhs_pipe_config_update() */
+
+	/* CNTMD */
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+		cntmd = 0; /* FIXME */
+
+	/* DIR */
+	if (dir_in)
+		usbhsp_flags_set(pipe, IS_DIR_HOST);
+
+	if (!!is_host ^ !!dir_in)
+		dir |= DIR_OUT;
+
+	if (!dir)
+		usbhsp_flags_set(pipe, IS_DIR_IN);
+
+	/* SHTNAK */
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) &&
+	    !dir)
+		shtnak = SHTNAK;
+
+	/* EPNUM */
+	epnum = 0; /* see usbhs_pipe_config_update() */
+	*pipecfg = type		|
+		   bfre		|
+		   dblb		|
+		   cntmd	|
+		   dir		|
+		   shtnak	|
+		   epnum;
+	return 0;
+}
+
+static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int pipe_num = usbhs_pipe_number(pipe);
+	u16 buff_size;
+	u16 bufnmb;
+	u16 bufnmb_cnt;
+	struct renesas_usbhs_driver_pipe_config *pipe_config =
+					usbhsp_get_pipe_config(priv, pipe_num);
+
+	/*
+	 * PIPEBUF
+	 *
+	 * see
+	 *  - "Register Descriptions" - "PIPEBUF" register
+	 *  - "Features"  - "Pipe configuration"
+	 *  - "Operation" - "FIFO Buffer Memory"
+	 *  - "Operation" - "Pipe Control"
+	 */
+	buff_size = pipe_config->bufsize;
+	bufnmb = pipe_config->bufnum;
+
+	/* change buff_size to register value */
+	bufnmb_cnt = (buff_size / 64) - 1;
+
+	dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n",
+		pipe_num, buff_size, bufnmb);
+
+	return	(0x1f & bufnmb_cnt)	<< 10 |
+		(0xff & bufnmb)		<<  0;
+}
+
+void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
+			      u16 epnum, u16 maxp)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int pipe_num = usbhs_pipe_number(pipe);
+	struct renesas_usbhs_driver_pipe_config *pipe_config =
+					usbhsp_get_pipe_config(priv, pipe_num);
+	u16 dblb = pipe_config->double_buf ? DBLB : 0;
+
+	if (devsel > 0xA) {
+		struct device *dev = usbhs_priv_to_dev(priv);
+
+		dev_err(dev, "devsel error %d\n", devsel);
+
+		devsel = 0;
+	}
+
+	usbhsp_pipe_barrier(pipe);
+
+	pipe->maxp = maxp;
+
+	usbhsp_pipe_select(pipe);
+	usbhsp_pipe_maxp_set(pipe, 0xFFFF,
+			     (devsel << 12) |
+			     maxp);
+
+	if (!usbhs_pipe_is_dcp(pipe))
+		usbhsp_pipe_cfg_set(pipe,  0x000F | DBLB, epnum | dblb);
+}
+
+/*
+ *		pipe control
+ */
+int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe)
+{
+	/*
+	 * see
+	 *	usbhs_pipe_config_update()
+	 *	usbhs_dcp_malloc()
+	 */
+	return pipe->maxp;
+}
+
+int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe)
+{
+	return usbhsp_flags_has(pipe, IS_DIR_IN);
+}
+
+int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe)
+{
+	return usbhsp_flags_has(pipe, IS_DIR_HOST);
+}
+
+int usbhs_pipe_is_running(struct usbhs_pipe *pipe)
+{
+	return usbhsp_flags_has(pipe, IS_RUNNING);
+}
+
+void usbhs_pipe_running(struct usbhs_pipe *pipe, int running)
+{
+	if (running)
+		usbhsp_flags_set(pipe, IS_RUNNING);
+	else
+		usbhsp_flags_clr(pipe, IS_RUNNING);
+}
+
+void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence)
+{
+	u16 mask = (SQCLR | SQSET);
+	u16 val;
+
+	/*
+	 * sequence
+	 *  0  : data0
+	 *  1  : data1
+	 *  -1 : no change
+	 */
+	switch (sequence) {
+	case 0:
+		val = SQCLR;
+		break;
+	case 1:
+		val = SQSET;
+		break;
+	default:
+		return;
+	}
+
+	usbhsp_pipectrl_set(pipe, mask, val);
+}
+
+static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe)
+{
+	return !!(usbhsp_pipectrl_get(pipe) & SQMON);
+}
+
+void usbhs_pipe_clear(struct usbhs_pipe *pipe)
+{
+	if (usbhs_pipe_is_dcp(pipe)) {
+		usbhs_fifo_clear_dcp(pipe);
+	} else {
+		usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
+		usbhsp_pipectrl_set(pipe, ACLRM, 0);
+	}
+}
+
+/* Should call usbhsp_pipe_select() before */
+void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
+				       int needs_bfre, int bfre_enable)
+{
+	int sequence;
+
+	usbhsp_pipe_select(pipe);
+	sequence = usbhs_pipe_get_data_sequence(pipe);
+	if (needs_bfre)
+		usbhsp_pipe_cfg_set(pipe, BFRE, bfre_enable ? BFRE : 0);
+	usbhs_pipe_clear(pipe);
+	usbhs_pipe_data_sequence(pipe, sequence);
+}
+
+void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable)
+{
+	if (usbhs_pipe_is_dcp(pipe))
+		return;
+
+	usbhsp_pipe_select(pipe);
+	/* check if the driver needs to change the BFRE value */
+	if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE)))
+		return;
+
+	usbhs_pipe_clear_without_sequence(pipe, 1, enable);
+}
+
+static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
+{
+	struct usbhs_pipe *pos, *pipe;
+	int i;
+
+	/*
+	 * find target pipe
+	 */
+	pipe = NULL;
+	usbhs_for_each_pipe_with_dcp(pos, priv, i) {
+		if (!usbhs_pipe_type_is(pos, type))
+			continue;
+		if (usbhsp_flags_has(pos, IS_USED))
+			continue;
+
+		pipe = pos;
+		break;
+	}
+
+	if (!pipe)
+		return NULL;
+
+	/*
+	 * initialize pipe flags
+	 */
+	usbhsp_flags_init(pipe);
+	usbhsp_flags_set(pipe, IS_USED);
+
+	return pipe;
+}
+
+static void usbhsp_put_pipe(struct usbhs_pipe *pipe)
+{
+	usbhsp_flags_init(pipe);
+}
+
+void usbhs_pipe_init(struct usbhs_priv *priv,
+		     int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map))
+{
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+	struct usbhs_pipe *pipe;
+	int i;
+
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		usbhsp_flags_init(pipe);
+		pipe->fifo = NULL;
+		pipe->mod_private = NULL;
+		INIT_LIST_HEAD(&pipe->list);
+
+		/* pipe force init */
+		usbhs_pipe_clear(pipe);
+	}
+
+	info->dma_map_ctrl = dma_map_ctrl;
+}
+
+struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
+				     int endpoint_type,
+				     int dir_in)
+{
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhs_pipe *pipe;
+	int is_host = usbhs_mod_is_host(priv);
+	int ret;
+	u16 pipecfg, pipebuf;
+
+	pipe = usbhsp_get_pipe(priv, endpoint_type);
+	if (!pipe) {
+		dev_err(dev, "can't get pipe (%s)\n",
+			usbhsp_pipe_name[endpoint_type]);
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&pipe->list);
+
+	usbhs_pipe_disable(pipe);
+
+	/* make sure pipe is not busy */
+	ret = usbhsp_pipe_barrier(pipe);
+	if (ret < 0) {
+		dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe));
+		return NULL;
+	}
+
+	if (usbhsp_setup_pipecfg(pipe, is_host, dir_in, &pipecfg)) {
+		dev_err(dev, "can't setup pipe\n");
+		return NULL;
+	}
+
+	pipebuf  = usbhsp_setup_pipebuff(pipe);
+
+	usbhsp_pipe_select(pipe);
+	usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg);
+	usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf);
+	usbhs_pipe_clear(pipe);
+
+	usbhs_pipe_sequence_data0(pipe);
+
+	dev_dbg(dev, "enable pipe %d : %s (%s)\n",
+		usbhs_pipe_number(pipe),
+		usbhs_pipe_name(pipe),
+		usbhs_pipe_is_dir_in(pipe) ? "in" : "out");
+
+	/*
+	 * epnum / maxp are still not set to this pipe.
+	 * call usbhs_pipe_config_update() after this function !!
+	 */
+
+	return pipe;
+}
+
+void usbhs_pipe_free(struct usbhs_pipe *pipe)
+{
+	usbhsp_pipe_select(pipe);
+	usbhsp_pipe_cfg_set(pipe, 0xFFFF, 0);
+	usbhsp_put_pipe(pipe);
+}
+
+void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo)
+{
+	if (pipe->fifo)
+		pipe->fifo->pipe = NULL;
+
+	pipe->fifo = fifo;
+
+	if (fifo)
+		fifo->pipe = pipe;
+}
+
+
+/*
+ *		dcp control
+ */
+struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv)
+{
+	struct usbhs_pipe *pipe;
+
+	pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL);
+	if (!pipe)
+		return NULL;
+
+	INIT_LIST_HEAD(&pipe->list);
+
+	/*
+	 * call usbhs_pipe_config_update() after this function !!
+	 */
+
+	return pipe;
+}
+
+void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	WARN_ON(!usbhs_pipe_is_dcp(pipe));
+
+	usbhs_pipe_enable(pipe);
+
+	if (!usbhs_mod_is_host(priv)) /* funconly */
+		usbhsp_pipectrl_set(pipe, CCPL, CCPL);
+}
+
+void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out)
+{
+	usbhsp_pipe_cfg_set(pipe, DIR_OUT,
+			    dir_out ? DIR_OUT : 0);
+}
+
+/*
+ *		pipe module function
+ */
+int usbhs_pipe_probe(struct usbhs_priv *priv)
+{
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+	struct usbhs_pipe *pipe;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
+	int pipe_size = usbhs_get_dparam(priv, pipe_size);
+	int i;
+
+	/* This driver expects 1st pipe is DCP */
+	if (pipe_configs[0].type != USB_ENDPOINT_XFER_CONTROL) {
+		dev_err(dev, "1st PIPE is not DCP\n");
+		return -EINVAL;
+	}
+
+	info->pipe = kcalloc(pipe_size, sizeof(struct usbhs_pipe),
+			     GFP_KERNEL);
+	if (!info->pipe)
+		return -ENOMEM;
+
+	info->size = pipe_size;
+
+	/*
+	 * init pipe
+	 */
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		pipe->priv = priv;
+
+		usbhs_pipe_type(pipe) =
+			pipe_configs[i].type & USB_ENDPOINT_XFERTYPE_MASK;
+
+		dev_dbg(dev, "pipe %x\t: %s\n",
+			i, usbhsp_pipe_name[pipe_configs[i].type]);
+	}
+
+	return 0;
+}
+
+void usbhs_pipe_remove(struct usbhs_priv *priv)
+{
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+
+	kfree(info->pipe);
+}
diff --git a/drivers/usb/gadget/rcar/pipe.h b/drivers/usb/gadget/rcar/pipe.h
new file mode 100644
index 00000000000..01c15178a28
--- /dev/null
+++ b/drivers/usb/gadget/rcar/pipe.h
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#ifndef RENESAS_USB_PIPE_H
+#define RENESAS_USB_PIPE_H
+
+#include "common.h"
+#include "fifo.h"
+
+/*
+ *	struct
+ */
+struct usbhs_pipe {
+	u32 pipe_type;	/* USB_ENDPOINT_XFER_xxx */
+
+	struct usbhs_priv *priv;
+	struct usbhs_fifo *fifo;
+	struct list_head list;
+
+	int maxp;
+
+	u32 flags;
+#define USBHS_PIPE_FLAGS_IS_USED		(1 << 0)
+#define USBHS_PIPE_FLAGS_IS_DIR_IN		(1 << 1)
+#define USBHS_PIPE_FLAGS_IS_DIR_HOST		(1 << 2)
+#define USBHS_PIPE_FLAGS_IS_RUNNING		(1 << 3)
+
+	const struct usbhs_pkt_handle *handler;
+
+	void *mod_private;
+};
+
+struct usbhs_pipe_info {
+	struct usbhs_pipe *pipe;
+	int size;	/* array size of "pipe" */
+
+	int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map);
+};
+
+/*
+ * pipe list
+ */
+#define __usbhs_for_each_pipe(start, pos, info, i)	\
+	for ((i) = start;						\
+	     ((i) < (info)->size) && ((pos) = (info)->pipe + (i));	\
+	     (i)++)
+
+#define usbhs_for_each_pipe(pos, priv, i)			\
+	__usbhs_for_each_pipe(1, pos, &((priv)->pipe_info), i)
+
+#define usbhs_for_each_pipe_with_dcp(pos, priv, i)		\
+	__usbhs_for_each_pipe(0, pos, &((priv)->pipe_info), i)
+
+/*
+ * data
+ */
+#define usbhs_priv_to_pipeinfo(pr)	(&(pr)->pipe_info)
+
+/*
+ * pipe control
+ */
+char *usbhs_pipe_name(struct usbhs_pipe *pipe);
+struct usbhs_pipe
+*usbhs_pipe_malloc(struct usbhs_priv *priv, int endpoint_type, int dir_in);
+void usbhs_pipe_free(struct usbhs_pipe *pipe);
+int usbhs_pipe_probe(struct usbhs_priv *priv);
+void usbhs_pipe_remove(struct usbhs_priv *priv);
+int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe);
+int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe);
+int usbhs_pipe_is_running(struct usbhs_pipe *pipe);
+void usbhs_pipe_running(struct usbhs_pipe *pipe, int running);
+
+void usbhs_pipe_init(struct usbhs_priv *priv,
+		     int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map));
+int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe);
+void usbhs_pipe_clear(struct usbhs_pipe *pipe);
+void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
+				       int needs_bfre, int bfre_enable);
+int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
+void usbhs_pipe_enable(struct usbhs_pipe *pipe);
+void usbhs_pipe_disable(struct usbhs_pipe *pipe);
+void usbhs_pipe_stall(struct usbhs_pipe *pipe);
+int usbhs_pipe_is_stall(struct usbhs_pipe *pipe);
+void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len);
+void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo);
+void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
+			      u16 epnum, u16 maxp);
+void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable);
+
+#define usbhs_pipe_sequence_data0(pipe)	usbhs_pipe_data_sequence(pipe, 0)
+#define usbhs_pipe_sequence_data1(pipe)	usbhs_pipe_data_sequence(pipe, 1)
+void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int data);
+
+#define usbhs_pipe_to_priv(p)	((p)->priv)
+#define usbhs_pipe_number(p)	(int)((p) - (p)->priv->pipe_info.pipe)
+#define usbhs_pipe_is_dcp(p)	((p)->priv->pipe_info.pipe == (p))
+#define usbhs_pipe_to_fifo(p)	((p)->fifo)
+#define usbhs_pipe_is_busy(p)	usbhs_pipe_to_fifo(p)
+
+#define usbhs_pipe_type(p)		((p)->pipe_type)
+#define usbhs_pipe_type_is(p, t)	((p)->pipe_type == t)
+
+/*
+ * dcp control
+ */
+struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv);
+void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe);
+void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out);
+
+#endif /* RENESAS_USB_PIPE_H */
diff --git a/drivers/usb/gadget/rcar/renesas_usb.h b/drivers/usb/gadget/rcar/renesas_usb.h
new file mode 100644
index 00000000000..8155e3dcaf6
--- /dev/null
+++ b/drivers/usb/gadget/rcar/renesas_usb.h
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * Renesas USB
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * Ported to u-boot
+ * Copyright (C) 2016 GlobalLogic
+ */
+#ifndef RENESAS_USB_H
+#define RENESAS_USB_H
+
+#include <linux/usb/ch9.h>
+#include <linux/compat.h>
+
+struct platform_device {
+	const char	*name;
+	struct device	dev;
+};
+
+/*
+ * module type
+ *
+ * it will be return value from get_id
+ */
+enum {
+	USBHS_HOST = 0,
+	USBHS_GADGET,
+	USBHS_MAX,
+};
+
+/*
+ * parameters for renesas usbhs
+ *
+ * some register needs USB chip specific parameters.
+ * This struct show it to driver
+ */
+
+struct renesas_usbhs_driver_pipe_config {
+	u8 type;	/* USB_ENDPOINT_XFER_xxx */
+	u16 bufsize;
+	u8 bufnum;
+	bool double_buf;
+};
+#define RENESAS_USBHS_PIPE(_type, _size, _num, _double_buf)	{	\
+			.type = (_type),		\
+			.bufsize = (_size),		\
+			.bufnum = (_num),		\
+			.double_buf = (_double_buf),	\
+	}
+
+struct renesas_usbhs_driver_param {
+	/*
+	 * pipe settings
+	 */
+	struct renesas_usbhs_driver_pipe_config *pipe_configs;
+	int pipe_size; /* pipe_configs array size */
+
+	/*
+	 * option:
+	 *
+	 * for BUSWAIT :: BWAIT
+	 * see
+	 *	renesas_usbhs/common.c :: usbhsc_set_buswait()
+	 * */
+	int buswait_bwait;
+
+	/*
+	 * option:
+	 *
+	 * delay time from notify_hotplug callback
+	 */
+	int detection_delay; /* msec */
+
+	/*
+	 * option:
+	 *
+	 * dma id for dmaengine
+	 * The data transfer direction on D0FIFO/D1FIFO should be
+	 * fixed for keeping consistency.
+	 * So, the platform id settings will be..
+	 *	.d0_tx_id = xx_TX,
+	 *	.d1_rx_id = xx_RX,
+	 * or
+	 *	.d1_tx_id = xx_TX,
+	 *	.d0_rx_id = xx_RX,
+	 */
+	int d0_tx_id;
+	int d0_rx_id;
+	int d1_tx_id;
+	int d1_rx_id;
+	int d2_tx_id;
+	int d2_rx_id;
+	int d3_tx_id;
+	int d3_rx_id;
+
+	/*
+	 * option:
+	 *
+	 * pio <--> dma border.
+	 */
+	int pio_dma_border; /* default is 64byte */
+
+	uintptr_t type;
+	u32 enable_gpio;
+
+	/*
+	 * option:
+	 */
+	u32 has_otg:1; /* for controlling PWEN/EXTLP */
+	u32 has_sudmac:1; /* for SUDMAC */
+	u32 has_usb_dmac:1; /* for USB-DMAC */
+	u32 cfifo_byte_addr:1; /* CFIFO is byte addressable */
+#define USBHS_USB_DMAC_XFER_SIZE	32	/* hardcode the xfer size */
+	u32 multi_clks:1;
+	u32 has_new_pipe_configs:1;
+};
+
+#define USBHS_TYPE_RCAR_GEN3		2
+
+struct usbhs_priv;
+struct usb_gadget *usbhsg_get_gadget(struct usbhs_priv *priv);
+
+#endif /* RENESAS_USB_H */
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0c3e9913318..90bc5653ee3 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -169,6 +169,12 @@ config WDT_CORTINA
 	  This driver support all CPU ISAs supported by Cortina
 	  Access CAxxxx SoCs.
 
+config WDT_DA9063
+	bool "DA9063 watchdog timer support"
+	depends on WDT && DM_PMIC_DA9063
+	help
+	  Enable support for the watchdog timer in Dialog DA9063.
+
 config WDT_GPIO
 	bool "External gpio watchdog support"
 	depends on WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 7b39adcf0ff..6b564b7f96d 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_WDT_BOOKE) += booke_wdt.o
 obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o
 obj-$(CONFIG_WDT_ORION) += orion_wdt.o
 obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
+obj-$(CONFIG_WDT_DA9063) += da9063-wdt.o
 obj-$(CONFIG_WDT_FTWDT010) += ftwdt010_wdt.o
 obj-$(CONFIG_WDT_GPIO) += gpio_wdt.o
 obj-$(CONFIG_WDT_MAX6370) += max6370_wdt.o
diff --git a/drivers/watchdog/da9063-wdt.c b/drivers/watchdog/da9063-wdt.c
new file mode 100644
index 00000000000..b7216b57863
--- /dev/null
+++ b/drivers/watchdog/da9063-wdt.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Based on the Linux drivers/watchdog/da9063_wdt.c file.
+ *
+ * Watchdog driver for DA9063 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>
+ *
+ * Ported to U-Boot by Fabio Estevam <festevam@denx.de>
+ *
+ */
+
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/device_compat.h>
+#include <dm/lists.h>
+#include <i2c.h>
+#include <linux/delay.h>
+#include <wdt.h>
+
+#define	DA9063_REG_CONTROL_D		0x11
+/* DA9063_REG_CONTROL_D (addr=0x11) */
+#define	DA9063_TWDSCALE_MASK		0x0
+#define DA9063_TWDSCALE_DISABLE		0
+#define	DA9063_REG_CONTROL_F		0x13
+/* DA9063_REG_CONTROL_F (addr=0x13) */
+#define	DA9063_WATCHDOG			0x01
+#define	DA9063_SHUTDOWN			0x02
+
+/*
+ * Watchdog selector to timeout in seconds.
+ *   0: WDT disabled;
+ *   others: timeout = 2048 ms * 2^(TWDSCALE-1).
+ */
+static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
+
+#define DA9063_TWDSCALE_DISABLE		0
+#define DA9063_TWDSCALE_MIN		1
+#define DA9063_TWDSCALE_MAX		(ARRAY_SIZE(wdt_timeout) - 1)
+
+static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs)
+{
+	unsigned int i;
+
+	for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) {
+		if (wdt_timeout[i] >= secs)
+			return i;
+	}
+
+	return DA9063_TWDSCALE_MAX;
+}
+
+static int da9063_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
+{
+	return dm_i2c_read(dev->parent, reg, buff, len);
+}
+
+static int da9063_write(struct udevice *dev, uint reg, const u8 *buff, int len)
+{
+	return dm_i2c_write(dev->parent, reg, buff, len);
+}
+
+static int da9063_wdt_disable_timer(struct udevice *dev)
+{
+	u8 val;
+
+	da9063_read(dev, DA9063_REG_CONTROL_D, &val, 1);
+	val &= ~DA9063_TWDSCALE_MASK;
+	val |= DA9063_TWDSCALE_DISABLE;
+	da9063_write(dev, DA9063_REG_CONTROL_D, &val, 1);
+
+	return 0;
+}
+
+static int da9063_wdt_update_timeout(struct udevice *dev, unsigned int timeout)
+{
+	unsigned int regval;
+	int ret;
+	u8 val;
+
+	/*
+	 * The watchdog triggers a reboot if a timeout value is already
+	 * programmed because the timeout value combines two functions
+	 * in one: indicating the counter limit and starting the watchdog.
+	 * The watchdog must be disabled to be able to change the timeout
+	 * value if the watchdog is already running. Then we can set the
+	 * new timeout value which enables the watchdog again.
+	 */
+	ret = da9063_wdt_disable_timer(dev);
+	if (ret)
+		return ret;
+
+	udelay(300);
+
+	regval = da9063_wdt_timeout_to_sel(timeout);
+
+	da9063_read(dev, DA9063_REG_CONTROL_D, &val, 1);
+	val &= ~DA9063_TWDSCALE_MASK;
+	val |= regval;
+	da9063_write(dev, DA9063_REG_CONTROL_D, &val, 1);
+
+	return 0;
+}
+
+static int da9063_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
+{
+	return da9063_wdt_update_timeout(dev, timeout);
+}
+
+static int da9063_wdt_stop(struct udevice *dev)
+{
+	return da9063_wdt_disable_timer(dev);
+}
+
+static int da9063_wdt_reset(struct udevice *dev)
+{
+	u8 val = DA9063_WATCHDOG;
+
+	return da9063_write(dev, DA9063_REG_CONTROL_F, &val, 1);
+}
+
+static int da9063_wdt_expire_now(struct udevice *dev, ulong flags)
+{
+	u8 val = DA9063_SHUTDOWN;
+
+	return da9063_write(dev, DA9063_REG_CONTROL_F, &val, 1);
+}
+
+static const struct wdt_ops da9063_wdt_ops = {
+	.start = da9063_wdt_start,
+	.stop = da9063_wdt_stop,
+	.reset = da9063_wdt_reset,
+	.expire_now = da9063_wdt_expire_now,
+};
+
+static const struct udevice_id da9063_wdt_ids[] = {
+	{ .compatible = "dlg,da9063-watchdog", },
+	{}
+};
+
+U_BOOT_DRIVER(da9063_wdt) = {
+	.name = "da9063-wdt",
+	.id = UCLASS_WDT,
+	.of_match = da9063_wdt_ids,
+	.ops = &da9063_wdt_ops,
+	.flags = DM_FLAG_PROBE_AFTER_BIND,
+};
diff --git a/dts/upstream/Bindings/arm/airoha.yaml b/dts/upstream/Bindings/arm/airoha.yaml
index 3292c669ee1..7c38c08dbf3 100644
--- a/dts/upstream/Bindings/arm/airoha.yaml
+++ b/dts/upstream/Bindings/arm/airoha.yaml
@@ -22,6 +22,10 @@ properties:
           - enum:
               - airoha,en7523-evb
           - const: airoha,en7523
+      - items:
+          - enum:
+              - airoha,en7581-evb
+          - const: airoha,en7581
 
 additionalProperties: true
 
diff --git a/dts/upstream/Bindings/arm/amlogic.yaml b/dts/upstream/Bindings/arm/amlogic.yaml
index a374b98080f..0647851ae1f 100644
--- a/dts/upstream/Bindings/arm/amlogic.yaml
+++ b/dts/upstream/Bindings/arm/amlogic.yaml
@@ -91,6 +91,7 @@ properties:
               - libretech,aml-s905x-cc
               - libretech,aml-s905x-cc-v2
               - nexbox,a95x
+              - osmc,vero4k
           - const: amlogic,s905x
           - const: amlogic,meson-gxl
 
@@ -107,6 +108,13 @@ properties:
           - const: amlogic,s905d
           - const: amlogic,meson-gxl
 
+      - description: Boards with the Amlogic Meson GXLX S905L SoC
+        items:
+          - enum:
+              - amlogic,p271
+          - const: amlogic,s905l
+          - const: amlogic,meson-gxlx
+
       - description: Boards with the Amlogic Meson GXM S912 SoC
         items:
           - enum:
@@ -169,6 +177,8 @@ properties:
               - azw,gtking
               - azw,gtking-pro
               - bananapi,bpi-m2s
+              - dream,dreambox-one
+              - dream,dreambox-two
               - hardkernel,odroid-go-ultra
               - hardkernel,odroid-n2
               - hardkernel,odroid-n2l
diff --git a/dts/upstream/Bindings/arm/amlogic/analog-top.txt b/dts/upstream/Bindings/arm/amlogic/analog-top.txt
deleted file mode 100644
index 101dc21014e..00000000000
--- a/dts/upstream/Bindings/arm/amlogic/analog-top.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Amlogic Meson8 and Meson8b "analog top" registers:
---------------------------------------------------
-
-The analog top registers contain information about the so-called
-"metal revision" (which encodes the "minor version") of the SoC.
-
-Required properties:
-- reg: the register range of the analog top registers
-- compatible: depending on the SoC this should be one of:
-		- "amlogic,meson8-analog-top"
-		- "amlogic,meson8b-analog-top"
-		along with "syscon"
-
-
-Example:
-
-	analog_top: analog-top@81a8 {
-		compatible = "amlogic,meson8-analog-top", "syscon";
-		reg = <0x81a8 0x14>;
-	};
diff --git a/dts/upstream/Bindings/arm/amlogic/assist.txt b/dts/upstream/Bindings/arm/amlogic/assist.txt
deleted file mode 100644
index 7656812b67b..00000000000
--- a/dts/upstream/Bindings/arm/amlogic/assist.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b assist registers:
------------------------------------------------
-
-The assist registers contain basic information about the SoC,
-for example the encoded SoC part number.
-
-Required properties:
-- reg: the register range of the assist registers
-- compatible: should be "amlogic,meson-mx-assist" along with "syscon"
-
-
-Example:
-
-	assist: assist@7c00 {
-		compatible = "amlogic,meson-mx-assist", "syscon";
-		reg = <0x7c00 0x200>;
-	};
diff --git a/dts/upstream/Bindings/arm/amlogic/bootrom.txt b/dts/upstream/Bindings/arm/amlogic/bootrom.txt
deleted file mode 100644
index 407e27f230a..00000000000
--- a/dts/upstream/Bindings/arm/amlogic/bootrom.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b bootrom:
---------------------------------------
-
-The bootrom register area can be used to access SoC specific
-information, such as the "misc version".
-
-Required properties:
-- reg: the register range of the bootrom registers
-- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon"
-
-
-Example:
-
-	bootrom: bootrom@d9040000 {
-		compatible = "amlogic,meson-mx-bootrom", "syscon";
-		reg = <0xd9040000 0x10000>;
-	};
diff --git a/dts/upstream/Bindings/arm/amlogic/pmu.txt b/dts/upstream/Bindings/arm/amlogic/pmu.txt
deleted file mode 100644
index 72f8d08198b..00000000000
--- a/dts/upstream/Bindings/arm/amlogic/pmu.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Amlogic Meson8 and Meson8b power-management-unit:
--------------------------------------------------
-
-The pmu is used to turn off and on different power domains of the SoCs
-This includes the power to the CPU cores.
-
-Required node properties:
-- compatible value : depending on the SoC this should be one of:
-			"amlogic,meson8-pmu"
-			"amlogic,meson8b-pmu"
-- reg : physical base address and the size of the registers window
-
-Example:
-
-	pmu@c81000e4 {
-		compatible = "amlogic,meson8b-pmu", "syscon";
-		reg = <0xc81000e0 0x18>;
-	};
diff --git a/dts/upstream/Bindings/arm/arm,coresight-dummy-sink.yaml b/dts/upstream/Bindings/arm/arm,coresight-dummy-sink.yaml
index c960c8e0a9a..08b89b62c50 100644
--- a/dts/upstream/Bindings/arm/arm,coresight-dummy-sink.yaml
+++ b/dts/upstream/Bindings/arm/arm,coresight-dummy-sink.yaml
@@ -30,7 +30,7 @@ description: |
 maintainers:
   - Mike Leach <mike.leach@linaro.org>
   - Suzuki K Poulose <suzuki.poulose@arm.com>
-  - James Clark <james.clark@arm.com>
+  - James Clark <james.clark@linaro.org>
   - Mao Jinlong <quic_jinlmao@quicinc.com>
   - Hao Zhang <quic_hazha@quicinc.com>
 
diff --git a/dts/upstream/Bindings/arm/arm,coresight-dummy-source.yaml b/dts/upstream/Bindings/arm/arm,coresight-dummy-source.yaml
index 6745b4cc8f1..d50a60368e2 100644
--- a/dts/upstream/Bindings/arm/arm,coresight-dummy-source.yaml
+++ b/dts/upstream/Bindings/arm/arm,coresight-dummy-source.yaml
@@ -29,7 +29,7 @@ description: |
 maintainers:
   - Mike Leach <mike.leach@linaro.org>
   - Suzuki K Poulose <suzuki.poulose@arm.com>
-  - James Clark <james.clark@arm.com>
+  - James Clark <james.clark@linaro.org>
   - Mao Jinlong <quic_jinlmao@quicinc.com>
   - Hao Zhang <quic_hazha@quicinc.com>
 
diff --git a/dts/upstream/Bindings/arm/arm,juno-fpga-apb-regs.yaml b/dts/upstream/Bindings/arm/arm,juno-fpga-apb-regs.yaml
new file mode 100644
index 00000000000..ce5f2e1ec1e
--- /dev/null
+++ b/dts/upstream/Bindings/arm/arm,juno-fpga-apb-regs.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,juno-fpga-apb-regs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Juno FPGA APB Registers
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+
+properties:
+  compatible:
+    items:
+      - const: arm,juno-fpga-apb-regs
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^led@[0-9a-f]+,[0-9a-f]$":
+    $ref: /schemas/leds/register-bit-led.yaml#
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10000 {
+        compatible = "arm,juno-fpga-apb-regs", "syscon", "simple-mfd";
+        reg = <0x010000 0x1000>;
+        ranges = <0x0 0x10000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        led@8,0 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x01>;
+            label = "vexpress:0";
+            linux,default-trigger = "heartbeat";
+            default-state = "on";
+        };
+    };
diff --git a/dts/upstream/Bindings/arm/atmel-sysregs.txt b/dts/upstream/Bindings/arm/atmel-sysregs.txt
index 67a66bf7489..7374beb5a61 100644
--- a/dts/upstream/Bindings/arm/atmel-sysregs.txt
+++ b/dts/upstream/Bindings/arm/atmel-sysregs.txt
@@ -41,35 +41,6 @@ Examples:
 		reg = <0xffffe800 0x200>;
 	};
 
-RAMC PHY Controller required properties:
-- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
-- reg: Should contain registers location and length
-
-Example:
-
-	ddr3phy: ddr3phy@e3804000 {
-		compatible = "microchip,sama7g5-ddr3phy", "syscon";
-		reg = <0xe3804000 0x1000>;
-};
-
-Special Function Registers (SFR)
-
-Special Function Registers (SFR) manage specific aspects of the integrated
-memory, bridge implementations, processor and other functionality not controlled
-elsewhere.
-
-required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon" or
-	"atmel,<chip>-sfrbu", "syscon"
-  <chip> can be "sama5d3", "sama5d4" or "sama5d2".
-  It also can be "microchip,sam9x60-sfr", "syscon".
-- reg: Should contain registers location and length
-
-	sfr@f0038000 {
-		compatible = "atmel,sama5d3-sfr", "syscon";
-		reg = <0xf0038000 0x60>;
-	};
-
 Security Module (SECUMOD)
 
 The Security Module macrocell provides all necessary secure functions to avoid
diff --git a/dts/upstream/Bindings/arm/axis.txt b/dts/upstream/Bindings/arm/axis.txt
index ae345e1c8d2..ebd33a88776 100644
--- a/dts/upstream/Bindings/arm/axis.txt
+++ b/dts/upstream/Bindings/arm/axis.txt
@@ -7,22 +7,6 @@ ARTPEC-6 ARM SoC
 Required root node properties:
 - compatible = "axis,artpec6";
 
-ARTPEC-6 System Controller
---------------------------
-
-The ARTPEC-6 has a system controller with mixed functions controlling DMA, PCIe
-and resets.
-
-Required properties:
-- compatible: "axis,artpec6-syscon", "syscon"
-- reg: Address and length of the register bank.
-
-Example:
-	syscon {
-		compatible = "axis,artpec6-syscon", "syscon";
-		reg = <0xf8000000 0x48>;
-	};
-
 ARTPEC-6 Development board:
 ---------------------------
 Required root node properties:
diff --git a/dts/upstream/Bindings/arm/bcm/bcm2835.yaml b/dts/upstream/Bindings/arm/bcm/bcm2835.yaml
index 162a39dab21..e4ff71f006b 100644
--- a/dts/upstream/Bindings/arm/bcm/bcm2835.yaml
+++ b/dts/upstream/Bindings/arm/bcm/bcm2835.yaml
@@ -23,6 +23,12 @@ properties:
               - raspberrypi,4-model-b
           - const: brcm,bcm2711
 
+      - description: BCM2712 based Boards
+        items:
+          - enum:
+              - raspberrypi,5-model-b
+          - const: brcm,bcm2712
+
       - description: BCM2835 based Boards
         items:
           - enum:
diff --git a/dts/upstream/Bindings/arm/cpu-enable-method/al,alpine-smp b/dts/upstream/Bindings/arm/cpu-enable-method/al,alpine-smp
index 35e5afb6d9a..cc7b1402a31 100644
--- a/dts/upstream/Bindings/arm/cpu-enable-method/al,alpine-smp
+++ b/dts/upstream/Bindings/arm/cpu-enable-method/al,alpine-smp
@@ -27,16 +27,6 @@ Properties:
 - reg : Offset and length of the register set for the device
 
 
-* Alpine System-Fabric Service Registers
-
-The System-Fabric Service Registers allow various operation on CPU and
-system fabric, like powering CPUs off.
-
-Properties:
-- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
-- reg : Offset and length of the register set for the device
-
-
 Example:
 
 cpus {
diff --git a/dts/upstream/Bindings/arm/cpus.yaml b/dts/upstream/Bindings/arm/cpus.yaml
index cc5a21b47e2..f308ff6c353 100644
--- a/dts/upstream/Bindings/arm/cpus.yaml
+++ b/dts/upstream/Bindings/arm/cpus.yaml
@@ -147,6 +147,7 @@ properties:
       - arm,cortex-a710
       - arm,cortex-a715
       - arm,cortex-a720
+      - arm,cortex-a725
       - arm,cortex-m0
       - arm,cortex-m0+
       - arm,cortex-m1
@@ -161,10 +162,15 @@ properties:
       - arm,cortex-x2
       - arm,cortex-x3
       - arm,cortex-x4
+      - arm,cortex-x925
       - arm,neoverse-e1
       - arm,neoverse-n1
       - arm,neoverse-n2
+      - arm,neoverse-n3
       - arm,neoverse-v1
+      - arm,neoverse-v2
+      - arm,neoverse-v3
+      - arm,neoverse-v3ae
       - brcm,brahma-b15
       - brcm,brahma-b53
       - brcm,vulcan
diff --git a/dts/upstream/Bindings/arm/freescale/fsl,imx7ulp-sim.yaml b/dts/upstream/Bindings/arm/freescale/fsl,imx7ulp-sim.yaml
index 526f508cb98..bd39cf107f3 100644
--- a/dts/upstream/Bindings/arm/freescale/fsl,imx7ulp-sim.yaml
+++ b/dts/upstream/Bindings/arm/freescale/fsl,imx7ulp-sim.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX7ULP System Integration Module
 
 maintainers:
-  - Anson Huang <anson.huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 description: |
   The system integration module (SIM) provides system control and chip configuration
diff --git a/dts/upstream/Bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt b/dts/upstream/Bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
deleted file mode 100644
index 44aa3c451cc..00000000000
--- a/dts/upstream/Bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Freescale Vybrid Miscellaneous System Control - CPU Configuration
-
-The MSCM IP contains multiple sub modules, this binding describes the first
-block of registers which contains CPU configuration information.
-
-Required properties:
-- compatible:	"fsl,vf610-mscm-cpucfg", "syscon"
-- reg:		the register range of the MSCM CPU configuration registers
-
-Example:
-	mscm_cpucfg: cpucfg@40001000 {
-		compatible = "fsl,vf610-mscm-cpucfg", "syscon";
-		reg = <0x40001000 0x800>;
-	}
diff --git a/dts/upstream/Bindings/arm/fsl.yaml b/dts/upstream/Bindings/arm/fsl.yaml
index 6d185d09cb6..80747d79418 100644
--- a/dts/upstream/Bindings/arm/fsl.yaml
+++ b/dts/upstream/Bindings/arm/fsl.yaml
@@ -8,7 +8,6 @@ title: Freescale i.MX Platforms
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Li Yang <leoyang.li@nxp.com>
 
 properties:
   $nodename:
@@ -363,6 +362,12 @@ properties:
           - const: gw,ventana
           - const: fsl,imx6q
 
+      - description: i.MX6Q Kontron SMARC-sAMX6i on SMARC Eval Carrier 2.0
+        items:
+          - const: kontron,imx6q-samx6i-ads2
+          - const: kontron,imx6q-samx6i
+          - const: fsl,imx6q
+
       - description: i.MX6Q PHYTEC phyBOARD-Mira
         items:
           - enum:
@@ -544,6 +549,12 @@ properties:
           - const: gw,ventana
           - const: fsl,imx6dl
 
+      - description: i.MX6DL Kontron SMARC-sAMX6i on SMARC Eval Carrier 2.0
+        items:
+          - const: kontron,imx6dl-samx6i-ads2
+          - const: kontron,imx6dl-samx6i
+          - const: fsl,imx6dl
+
       - description: i.MX6DL PHYTEC phyBOARD-Mira
         items:
           - enum:
@@ -946,6 +957,13 @@ properties:
               - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
           - const: fsl,imx8mm
 
+      - description: Compulab i.MX8MM UCM SoM based boards
+        items:
+          - enum:
+              - compulab,imx8mm-iot-gateway     # i.MX8MM Compulab IoT-Gateway
+          - const: compulab,imx8mm-ucm-som      # i.MX8MM Compulab UCM SoM
+          - const: fsl,imx8mm
+
       - description: Emtop i.MX8MM based Boards
         items:
           - const: ees,imx8mm-emtop-baseboard      # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1
@@ -1145,8 +1163,9 @@ properties:
           version as an industrial computing device.
         items:
           - enum:
-              - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
-          - const: tq,imx8mp-tqma8mpql       # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
+              - tq,imx8mp-tqma8mpql-mba8mpxl      # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
+              - tq,imx8mp-tqma8mpql-mba8mp-ras314 # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MP-RAS314
+          - const: tq,imx8mp-tqma8mpql            # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
           - const: fsl,imx8mp
 
       - description: i.MX8MQ based Boards
@@ -1272,9 +1291,16 @@ properties:
       - description: i.MX93 based Boards
         items:
           - enum:
+              - fsl,imx93-9x9-qsb         # i.MX93 9x9 QSB Board
               - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
           - const: fsl,imx93
 
+      - description: i.MX95 based Boards
+        items:
+          - enum:
+              - fsl,imx95-19x19-evk       # i.MX95 19x19 EVK Board
+          - const: fsl,imx95
+
       - description: i.MXRT1050 based Boards
         items:
           - enum:
diff --git a/dts/upstream/Bindings/arm/keystone/ti,sci.yaml b/dts/upstream/Bindings/arm/keystone/ti,sci.yaml
index 7f06b108024..25a2b42105e 100644
--- a/dts/upstream/Bindings/arm/keystone/ti,sci.yaml
+++ b/dts/upstream/Bindings/arm/keystone/ti,sci.yaml
@@ -20,7 +20,7 @@ description: |
   initialized early into boot process and provides services to Operating Systems
   on multiple processors including ones running Linux.
 
-  See http://processors.wiki.ti.com/index.php/TISCI for protocol definition.
+  See https://software-dl.ti.com/tisci/esd/latest/index.html for protocol definition.
 
   The TI-SCI node describes the Texas Instrument's System Controller entity node.
   This parent node may optionally have additional children nodes which describe
diff --git a/dts/upstream/Bindings/arm/marvell/armada-7k-8k.yaml b/dts/upstream/Bindings/arm/marvell/armada-7k-8k.yaml
index 16d2e132d3d..538d91be885 100644
--- a/dts/upstream/Bindings/arm/marvell/armada-7k-8k.yaml
+++ b/dts/upstream/Bindings/arm/marvell/armada-7k-8k.yaml
@@ -82,4 +82,22 @@ properties:
           - const: marvell,armada-ap807-quad
           - const: marvell,armada-ap807
 
+      - description:
+          SolidRun CN9130 SoM based single-board computers
+        items:
+          - enum:
+              - solidrun,cn9130-clearfog-base
+              - solidrun,cn9130-clearfog-pro
+              - solidrun,cn9131-solidwan
+          - const: solidrun,cn9130-sr-som
+          - const: marvell,cn9130
+
+      - description:
+          SolidRun CN9132 COM-Express Type 7 based single-board computers
+        items:
+          - enum:
+              - solidrun,cn9132-clearfog
+          - const: solidrun,cn9132-sr-cex7
+          - const: marvell,cn9130
+
 additionalProperties: true
diff --git a/dts/upstream/Bindings/arm/marvell/marvell,dove.txt b/dts/upstream/Bindings/arm/marvell/marvell,dove.txt
index aaaf64c56e4..e10e8525eab 100644
--- a/dts/upstream/Bindings/arm/marvell/marvell,dove.txt
+++ b/dts/upstream/Bindings/arm/marvell/marvell,dove.txt
@@ -5,18 +5,3 @@ Boards with a Marvell Dove SoC shall have the following properties:
 
 Required root node property:
 - compatible: must contain "marvell,dove";
-
-* Global Configuration registers
-
-Global Configuration registers of Dove SoC are shared by a syscon node.
-
-Required properties:
-- compatible: must contain "marvell,dove-global-config" and "syscon".
-- reg: base address and size of the Global Configuration registers.
-
-Example:
-
-gconf: global-config@e802c {
-	compatible = "marvell,dove-global-config", "syscon";
-	reg = <0xe802c 0x14>;
-};
diff --git a/dts/upstream/Bindings/arm/mediatek.yaml b/dts/upstream/Bindings/arm/mediatek.yaml
index 09f9ffd3ff7..1d4bb50fcd8 100644
--- a/dts/upstream/Bindings/arm/mediatek.yaml
+++ b/dts/upstream/Bindings/arm/mediatek.yaml
@@ -85,12 +85,15 @@ properties:
           - const: mediatek,mt7629
       - items:
           - enum:
+              - cudy,wr3000-v1
+              - openwrt,one
               - xiaomi,ax3000t
           - const: mediatek,mt7981b
       - items:
           - enum:
               - acelink,ew-7886cax
               - bananapi,bpi-r3
+              - bananapi,bpi-r3mini
               - mediatek,mt7986a-rfb
           - const: mediatek,mt7986a
       - items:
@@ -293,6 +296,13 @@ properties:
           - const: google,tentacruel-sku327683
           - const: google,tentacruel
           - const: mediatek,mt8186
+      - description: Google Voltorb (Acer Chromebook 311 C723/C732T)
+        items:
+          - enum:
+              - google,voltorb-sku589824
+              - google,voltorb-sku589825
+          - const: google,voltorb
+          - const: mediatek,mt8186
       - items:
           - enum:
               - mediatek,mt8186-evb
@@ -342,6 +352,14 @@ properties:
           - const: google,tomato-rev3
           - const: google,tomato
           - const: mediatek,mt8195
+      - description: HP Dojo sku1, 3, 5, 7 (HP Chromebook x360 13b-ca0002sa)
+        items:
+          - const: google,dojo-sku7
+          - const: google,dojo-sku5
+          - const: google,dojo-sku3
+          - const: google,dojo-sku1
+          - const: google,dojo
+          - const: mediatek,mt8195
       - items:
           - enum:
               - mediatek,mt8195-demo
@@ -353,6 +371,12 @@ properties:
           - const: mediatek,mt8365
       - items:
           - enum:
+              - mediatek,mt8390-evk
+          - const: mediatek,mt8390
+          - const: mediatek,mt8188
+      - items:
+          - enum:
+              - kontron,3-5-sbc-i1200
               - mediatek,mt8395-evk
               - radxa,nio-12l
           - const: mediatek,mt8395
diff --git a/dts/upstream/Bindings/arm/pmu.yaml b/dts/upstream/Bindings/arm/pmu.yaml
index 99b5e953070..528544d0a16 100644
--- a/dts/upstream/Bindings/arm/pmu.yaml
+++ b/dts/upstream/Bindings/arm/pmu.yaml
@@ -53,14 +53,20 @@ properties:
           - arm,cortex-a710-pmu
           - arm,cortex-a715-pmu
           - arm,cortex-a720-pmu
+          - arm,cortex-a725-pmu
           - arm,cortex-x1-pmu
           - arm,cortex-x2-pmu
           - arm,cortex-x3-pmu
           - arm,cortex-x4-pmu
+          - arm,cortex-x925-pmu
           - arm,neoverse-e1-pmu
           - arm,neoverse-n1-pmu
           - arm,neoverse-n2-pmu
+          - arm,neoverse-n3-pmu
           - arm,neoverse-v1-pmu
+          - arm,neoverse-v2-pmu
+          - arm,neoverse-v3-pmu
+          - arm,neoverse-v3ae-pmu
           - brcm,vulcan-pmu
           - cavium,thunder-pmu
           - nvidia,denver-pmu
diff --git a/dts/upstream/Bindings/arm/qcom.yaml b/dts/upstream/Bindings/arm/qcom.yaml
index ae885414b18..f08e13b6117 100644
--- a/dts/upstream/Bindings/arm/qcom.yaml
+++ b/dts/upstream/Bindings/arm/qcom.yaml
@@ -42,6 +42,7 @@ description: |
         msm8996
         msm8998
         qcs404
+        qcs8550
         qcm2290
         qcm6490
         qdu1000
@@ -96,6 +97,7 @@ properties:
       - items:
           - enum:
               - qcom,apq8016-sbc
+              - schneider,apq8016-hmibsc
           - const: qcom,apq8016
 
       - items:
@@ -104,6 +106,7 @@ properties:
               - huawei,sturgeon
               - lg,lenok
               - samsung,matisse-wifi
+              - samsung,milletwifi
           - const: qcom,apq8026
 
       - items:
@@ -138,6 +141,7 @@ properties:
               - microsoft,makepeace
               - microsoft,moneypenny
               - motorola,falcon
+              - samsung,ms013g
               - samsung,s3ve3g
           - const: qcom,msm8226
 
@@ -175,6 +179,7 @@ properties:
       - items:
           - enum:
               - lge,hammerhead
+              - samsung,hlte
               - sony,xperia-amami
               - sony,xperia-honami
           - const: qcom,msm8974
@@ -182,8 +187,10 @@ properties:
       - items:
           - enum:
               - fairphone,fp2
+              - htc,m8
               - oneplus,bacon
               - samsung,klte
+              - sony,xperia-aries
               - sony,xperia-castor
               - sony,xperia-leo
           - const: qcom,msm8974pro
@@ -203,8 +210,13 @@ properties:
               - asus,z00l
               - gplus,fl8005a
               - huawei,g7
+              - lg,c50
+              - lg,m216
               - longcheer,l8910
               - longcheer,l8150
+              - motorola,harpia
+              - motorola,osprey
+              - motorola,surnia
               - qcom,msm8916-mtp
               - samsung,a3u-eur
               - samsung,a5u-eur
@@ -316,6 +328,7 @@ properties:
       - items:
           - enum:
               - qcom,ipq5018-rdp432-c2
+              - tplink,archer-ax55-v1
           - const: qcom,ipq5018
 
       - items:
@@ -366,6 +379,7 @@ properties:
               - fairphone,fp5
               - qcom,qcm6490-idp
               - qcom,qcs6490-rb3gen2
+              - shift,otter
           - const: qcom,qcm6490
 
       - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
@@ -802,6 +816,7 @@ properties:
 
       - items:
           - enum:
+              - lenovo,tbx605f
               - motorola,ali
           - const: qcom,sdm450
 
@@ -883,6 +898,7 @@ properties:
       - items:
           - enum:
               - qcom,sa8775p-ride
+              - qcom,sa8775p-ride-r3
           - const: qcom,sa8775p
 
       - items:
@@ -1004,17 +1020,28 @@ properties:
               - qcom,sm8550-hdk
               - qcom,sm8550-mtp
               - qcom,sm8550-qrd
+              - samsung,q5q
               - sony,pdx234
           - const: qcom,sm8550
 
       - items:
           - enum:
+              - qcom,qcs8550-aim300-aiot
+          - const: qcom,qcs8550-aim300
+          - const: qcom,qcs8550
+          - const: qcom,sm8550
+
+      - items:
+          - enum:
+              - qcom,sm8650-hdk
               - qcom,sm8650-mtp
               - qcom,sm8650-qrd
           - const: qcom,sm8650
 
       - items:
           - enum:
+              - asus,vivobook-s15
+              - lenovo,yoga-slim7x
               - qcom,x1e80100-crd
               - qcom,x1e80100-qcp
           - const: qcom,x1e80100
diff --git a/dts/upstream/Bindings/arm/rockchip.yaml b/dts/upstream/Bindings/arm/rockchip.yaml
index e04c213a0de..1ef09fbfdfa 100644
--- a/dts/upstream/Bindings/arm/rockchip.yaml
+++ b/dts/upstream/Bindings/arm/rockchip.yaml
@@ -248,6 +248,13 @@ properties:
           - const: friendlyarm,nanopc-t6
           - const: rockchip,rk3588
 
+      - description: FriendlyElec CM3588-based boards
+        items:
+          - enum:
+              - friendlyarm,cm3588-nas
+          - const: friendlyarm,cm3588
+          - const: rockchip,rk3588
+
       - description: GameForce Chi
         items:
           - const: gameforce,chi
@@ -627,6 +634,11 @@ properties:
           - const: mqmaker,miqi
           - const: rockchip,rk3288
 
+      - description: Neardi LBA3368
+        items:
+          - const: neardi,lba3368
+          - const: rockchip,rk3368
+
       - description: Netxeon R89 board
         items:
           - const: netxeon,r89
@@ -799,11 +811,21 @@ properties:
           - const: radxa,rock3a
           - const: rockchip,rk3568
 
+      - description: Radxa ROCK 3B
+        items:
+          - const: radxa,rock-3b
+          - const: rockchip,rk3568
+
       - description: Radxa ROCK 3C
         items:
           - const: radxa,rock-3c
           - const: rockchip,rk3566
 
+      - description: Radxa ROCK 5 ITX
+        items:
+          - const: radxa,rock-5-itx
+          - const: rockchip,rk3588
+
       - description: Radxa ROCK 5A
         items:
           - const: radxa,rock-5a
@@ -814,6 +836,18 @@ properties:
           - const: radxa,rock-5b
           - const: rockchip,rk3588
 
+      - description: Radxa ROCK S0
+        items:
+          - const: radxa,rock-s0
+          - const: rockchip,rk3308
+
+      - description: Radxa ZERO 3W/3E
+        items:
+          - enum:
+              - radxa,zero-3e
+              - radxa,zero-3w
+          - const: rockchip,rk3566
+
       - description: Rikomagic MK808 v1
         items:
           - const: rikomagic,mk808
@@ -959,6 +993,14 @@ properties:
           - const: wolfvision,rk3568-pf5
           - const: rockchip,rk3568
 
+      - description: Xunlong Orange Pi 3B
+        items:
+          - enum:
+              - xunlong,orangepi-3b-v1.1
+              - xunlong,orangepi-3b-v2.1
+          - const: xunlong,orangepi-3b
+          - const: rockchip,rk3566
+
       - description: Xunlong Orange Pi 5 Plus
         items:
           - const: xunlong,orangepi-5-plus
diff --git a/dts/upstream/Bindings/arm/rtsm-dcscb.txt b/dts/upstream/Bindings/arm/rtsm-dcscb.txt
deleted file mode 100644
index 3b8fbf3c00c..00000000000
--- a/dts/upstream/Bindings/arm/rtsm-dcscb.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-ARM Dual Cluster System Configuration Block
--------------------------------------------
-
-The Dual Cluster System Configuration Block (DCSCB) provides basic
-functionality for controlling clocks, resets and configuration pins in
-the Dual Cluster System implemented by the Real-Time System Model (RTSM).
-
-Required properties:
-
-- compatible : should be "arm,rtsm,dcscb"
-
-- reg : physical base address and the size of the registers window
-
-Example:
-
-	dcscb@60000000 {
-		compatible = "arm,rtsm,dcscb";
-		reg = <0x60000000 0x1000>;
-	};
diff --git a/dts/upstream/Bindings/arm/spear-misc.txt b/dts/upstream/Bindings/arm/spear-misc.txt
deleted file mode 100644
index e404e2556b4..00000000000
--- a/dts/upstream/Bindings/arm/spear-misc.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-SPEAr Misc configuration
-===========================
-SPEAr SOCs have some miscellaneous registers which are used to configure
-few properties of different peripheral controllers.
-
-misc node required properties:
-
-- compatible Should be	"st,spear1340-misc", "syscon".
-- reg: Address range of misc space up to 8K
diff --git a/dts/upstream/Bindings/arm/stm32/stm32.yaml b/dts/upstream/Bindings/arm/stm32/stm32.yaml
index bc2f43330ae..58099949e8f 100644
--- a/dts/upstream/Bindings/arm/stm32/stm32.yaml
+++ b/dts/upstream/Bindings/arm/stm32/stm32.yaml
@@ -59,6 +59,12 @@ properties:
               - prt,prtt1s   # Protonic PRTT1S
           - const: st,stm32mp151
 
+      - description: DH STM32MP135 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp135f-dhcor-dhsbc
+          - const: dh,stm32mp135f-dhcor-som
+          - const: st,stm32mp135
+
       - description: DH STM32MP151 DHCOR SoM based Boards
         items:
           - const: dh,stm32mp151a-dhcor-testbench
diff --git a/dts/upstream/Bindings/arm/sunxi.yaml b/dts/upstream/Bindings/arm/sunxi.yaml
index c2a158b75e4..09dc6f42498 100644
--- a/dts/upstream/Bindings/arm/sunxi.yaml
+++ b/dts/upstream/Bindings/arm/sunxi.yaml
@@ -708,12 +708,12 @@ properties:
           - const: olimex,a64-teres-i
           - const: allwinner,sun50i-a64
 
-      - description: Pine64
+      - description: Pine64 PINE A64
         items:
           - const: pine64,pine64
           - const: allwinner,sun50i-a64
 
-      - description: Pine64+
+      - description: Pine64 PINE A64+
         items:
           - const: pine64,pine64-plus
           - const: allwinner,sun50i-a64
@@ -724,17 +724,17 @@ properties:
           - const: sochip,s3
           - const: allwinner,sun8i-v3
 
-      - description: Pine64 PineH64 model A
+      - description: Pine64 PINE H64 Model A
         items:
           - const: pine64,pine-h64
           - const: allwinner,sun50i-h6
 
-      - description: Pine64 PineH64 model B
+      - description: Pine64 PINE H64 Model B
         items:
           - const: pine64,pine-h64-model-b
           - const: allwinner,sun50i-h6
 
-      - description: Pine64 LTS
+      - description: Pine64 PINE A64 LTS
         items:
           - const: pine64,pine64-lts
           - const: allwinner,sun50i-r18
@@ -763,17 +763,17 @@ properties:
           - const: pine64,pinephone
           - const: allwinner,sun50i-a64
 
-      - description: Pine64 PineTab, Development Sample
+      - description: Pine64 PineTab Developer Sample
         items:
           - const: pine64,pinetab
           - const: allwinner,sun50i-a64
 
-      - description: Pine64 PineTab, Early Adopter's batch (and maybe later ones)
+      - description: Pine64 PineTab Early Adopter
         items:
           - const: pine64,pinetab-early-adopter
           - const: allwinner,sun50i-a64
 
-      - description: Pine64 SoPine Baseboard
+      - description: Pine64 SOPINE
         items:
           - const: pine64,sopine-baseboard
           - const: pine64,sopine
diff --git a/dts/upstream/Bindings/arm/ti/k3.yaml b/dts/upstream/Bindings/arm/ti/k3.yaml
index 52b51fd7044..4d9c5fbb4c2 100644
--- a/dts/upstream/Bindings/arm/ti/k3.yaml
+++ b/dts/upstream/Bindings/arm/ti/k3.yaml
@@ -25,6 +25,12 @@ properties:
               - ti,am62a7-sk
           - const: ti,am62a7
 
+      - description: K3 AM62A7 SoC PHYTEC phyBOARD-Lyra
+        items:
+          - const: phytec,am62a7-phyboard-lyra-rdk
+          - const: phytec,am62a-phycore-som
+          - const: ti,am62a7
+
       - description: K3 AM62P5 SoC and Boards
         items:
           - enum:
diff --git a/dts/upstream/Bindings/ata/ahci-fsl-qoriq.txt b/dts/upstream/Bindings/ata/ahci-fsl-qoriq.txt
deleted file mode 100644
index 7c3ca0e13de..00000000000
--- a/dts/upstream/Bindings/ata/ahci-fsl-qoriq.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Binding for Freescale QorIQ AHCI SATA Controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
-    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt binding.
-
-Optional properties:
-  - dma-coherent: Enable AHCI coherent DMA operation.
-  - reg-names: register area names when there are more than 1 register area.
-
-Examples:
-	sata@3200000 {
-		compatible = "fsl,ls1021a-ahci";
-		reg = <0x0 0x3200000 0x0 0x10000>;
-		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&platform_clk 1>;
-		dma-coherent;
-	};
diff --git a/dts/upstream/Bindings/ata/fsl,ahci.yaml b/dts/upstream/Bindings/ata/fsl,ahci.yaml
new file mode 100644
index 00000000000..ea4428bc174
--- /dev/null
+++ b/dts/upstream/Bindings/ata/fsl,ahci.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/fsl,ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QorIQ AHCI SATA Controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: SATA controller for ls1012a
+        items:
+          - const: fsl,ls1012a-ahci
+          - const: fsl,ls1043a-ahci
+      - enum:
+          - fsl,ls1021a-ahci
+          - fsl,ls1028a-ahci
+          - fsl,ls1043a-ahci
+          - fsl,ls1046a-ahci
+          - fsl,ls1088a-ahci
+          - fsl,ls2080a-ahci
+          - fsl,lx2160a-ahci
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ahci
+      - const: sata-ecc
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sata@3200000 {
+        compatible = "fsl,ls1021a-ahci";
+        reg = <0x3200000 0x10000>;
+        interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&platform_clk 1>;
+        dma-coherent;
+    };
diff --git a/dts/upstream/Bindings/ata/rockchip,dwc-ahci.yaml b/dts/upstream/Bindings/ata/rockchip,dwc-ahci.yaml
index b5e5767d869..13eaa8d9a16 100644
--- a/dts/upstream/Bindings/ata/rockchip,dwc-ahci.yaml
+++ b/dts/upstream/Bindings/ata/rockchip,dwc-ahci.yaml
@@ -35,6 +35,9 @@ properties:
   ports-implemented:
     const: 1
 
+  power-domains:
+    maxItems: 1
+
   sata-port@0:
     $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
 
diff --git a/dts/upstream/Bindings/cache/qcom,llcc.yaml b/dts/upstream/Bindings/cache/qcom,llcc.yaml
index b9a9f2cf32a..68ea5f70b75 100644
--- a/dts/upstream/Bindings/cache/qcom,llcc.yaml
+++ b/dts/upstream/Bindings/cache/qcom,llcc.yaml
@@ -21,6 +21,7 @@ properties:
   compatible:
     enum:
       - qcom,qdu1000-llcc
+      - qcom,sa8775p-llcc
       - qcom,sc7180-llcc
       - qcom,sc7280-llcc
       - qcom,sc8180x-llcc
@@ -84,6 +85,33 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sa8775p-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sc7280-llcc
     then:
       properties:
@@ -141,8 +169,31 @@ allOf:
               - qcom,sm8150-llcc
               - qcom,sm8250-llcc
               - qcom,sm8350-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sm8450-llcc
               - qcom,sm8550-llcc
+              - qcom,sm8650-llcc
     then:
       properties:
         reg:
@@ -151,7 +202,8 @@ allOf:
             - description: LLCC1 base register region
             - description: LLCC2 base register region
             - description: LLCC3 base register region
-            - description: LLCC broadcast base register region
+            - description: LLCC broadcast OR register region
+            - description: LLCC broadcast AND register region
         reg-names:
           items:
             - const: llcc0_base
@@ -159,6 +211,7 @@ allOf:
             - const: llcc2_base
             - const: llcc3_base
             - const: llcc_broadcast_base
+            - const: llcc_broadcast_and_base
 
 additionalProperties: false
 
diff --git a/dts/upstream/Bindings/cache/starfive,jh8100-starlink-cache.yaml b/dts/upstream/Bindings/cache/starfive,jh8100-starlink-cache.yaml
new file mode 100644
index 00000000000..6d61098e388
--- /dev/null
+++ b/dts/upstream/Bindings/cache/starfive,jh8100-starlink-cache.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/starfive,jh8100-starlink-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive StarLink Cache Controller
+
+maintainers:
+  - Joshua Yeong <joshua.yeong@starfivetech.com>
+
+description:
+  StarFive's StarLink Cache Controller manages the L3 cache shared between
+  clusters of CPU cores. The cache driver enables RISC-V non-standard cache
+  management as an alternative to instructions in the RISC-V Zicbom extension.
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+# We need a select here so we don't match all nodes with 'cache'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - starfive,jh8100-starlink-cache
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: starfive,jh8100-starlink-cache
+      - const: cache
+
+  reg:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - cache-block-size
+  - cache-level
+  - cache-sets
+  - cache-size
+  - cache-unified
+
+examples:
+  - |
+      soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cache-controller@15000000 {
+          compatible = "starfive,jh8100-starlink-cache", "cache";
+          reg = <0x0 0x15000000 0x0 0x278>;
+          cache-block-size = <64>;
+          cache-level = <3>;
+          cache-sets = <8192>;
+          cache-size = <0x400000>;
+          cache-unified;
+        };
+      };
diff --git a/dts/upstream/Bindings/clock/airoha,en7523-scu.yaml b/dts/upstream/Bindings/clock/airoha,en7523-scu.yaml
index 3f426663773..84353fd0942 100644
--- a/dts/upstream/Bindings/clock/airoha,en7523-scu.yaml
+++ b/dts/upstream/Bindings/clock/airoha,en7523-scu.yaml
@@ -35,7 +35,7 @@ properties:
 
   reg:
     minItems: 2
-    maxItems: 3
+    maxItems: 4
 
   "#clock-cells":
     description:
@@ -43,6 +43,10 @@ properties:
       clocks.
     const: 1
 
+  '#reset-cells':
+    description: ID of the controller reset line
+    const: 1
+
 required:
   - compatible
   - reg
@@ -60,6 +64,8 @@ allOf:
             - description: scu base address
             - description: misc scu base address
 
+        '#reset-cells': false
+
   - if:
       properties:
         compatible:
@@ -70,6 +76,7 @@ allOf:
           items:
             - description: scu base address
             - description: misc scu base address
+            - description: reset base address
             - description: pb scu base address
 
 additionalProperties: false
@@ -83,3 +90,19 @@ examples:
             <0x1fb00000 0x1000>;
       #clock-cells = <1>;
     };
+
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      scuclk: clock-controller@1fa20000 {
+        compatible = "airoha,en7581-scu";
+        reg = <0x0 0x1fa20000 0x0 0x400>,
+              <0x0 0x1fb00000 0x0 0x90>,
+              <0x0 0x1fb00830 0x0 0x8>,
+              <0x0 0x1fbe3400 0x0 0xfc>;
+              #clock-cells = <1>;
+              #reset-cells = <1>;
+      };
+    };
diff --git a/dts/upstream/Bindings/clock/amlogic,a1-peripherals-clkc.yaml b/dts/upstream/Bindings/clock/amlogic,a1-peripherals-clkc.yaml
index 6d84cee1bd7..2568ad7dd0a 100644
--- a/dts/upstream/Bindings/clock/amlogic,a1-peripherals-clkc.yaml
+++ b/dts/upstream/Bindings/clock/amlogic,a1-peripherals-clkc.yaml
@@ -30,6 +30,8 @@ properties:
       - description: input fixed pll div7
       - description: input hifi pll
       - description: input oscillator (usually at 24MHz)
+      - description: input sys pll
+    minItems: 6 # sys_pll is optional
 
   clock-names:
     items:
@@ -39,6 +41,8 @@ properties:
       - const: fclk_div7
       - const: hifi_pll
       - const: xtal
+      - const: sys_pll
+    minItems: 6 # sys_pll is optional
 
 required:
   - compatible
@@ -65,9 +69,10 @@ examples:
                      <&clkc_pll CLKID_FCLK_DIV5>,
                      <&clkc_pll CLKID_FCLK_DIV7>,
                      <&clkc_pll CLKID_HIFI_PLL>,
-                     <&xtal>;
+                     <&xtal>,
+                     <&clkc_pll CLKID_SYS_PLL>;
             clock-names = "fclk_div2", "fclk_div3",
                           "fclk_div5", "fclk_div7",
-                          "hifi_pll", "xtal";
+                          "hifi_pll", "xtal", "sys_pll";
         };
     };
diff --git a/dts/upstream/Bindings/clock/amlogic,a1-pll-clkc.yaml b/dts/upstream/Bindings/clock/amlogic,a1-pll-clkc.yaml
index a59b188a8bf..c99274d2a9b 100644
--- a/dts/upstream/Bindings/clock/amlogic,a1-pll-clkc.yaml
+++ b/dts/upstream/Bindings/clock/amlogic,a1-pll-clkc.yaml
@@ -26,11 +26,15 @@ properties:
     items:
       - description: input fixpll_in
       - description: input hifipll_in
+      - description: input syspll_in
+    minItems: 2 # syspll_in is optional
 
   clock-names:
     items:
       - const: fixpll_in
       - const: hifipll_in
+      - const: syspll_in
+    minItems: 2 # syspll_in is optional
 
 required:
   - compatible
@@ -53,7 +57,8 @@ examples:
             reg = <0 0x7c80 0 0x18c>;
             #clock-cells = <1>;
             clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
-                     <&clkc_periphs CLKID_HIFIPLL_IN>;
-            clock-names = "fixpll_in", "hifipll_in";
+                     <&clkc_periphs CLKID_HIFIPLL_IN>,
+                     <&clkc_periphs CLKID_SYSPLL_IN>;
+            clock-names = "fixpll_in", "hifipll_in", "syspll_in";
         };
     };
diff --git a/dts/upstream/Bindings/clock/amlogic,axg-audio-clkc.txt b/dts/upstream/Bindings/clock/amlogic,axg-audio-clkc.txt
deleted file mode 100644
index 3a8948c04bc..00000000000
--- a/dts/upstream/Bindings/clock/amlogic,axg-audio-clkc.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Amlogic AXG Audio Clock Controllers
-
-The Amlogic AXG audio clock controller generates and supplies clock to the
-other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
-devices.
-
-Required Properties:
-
-- compatible	: should be "amlogic,axg-audio-clkc" for the A113X and A113D,
-		  "amlogic,g12a-audio-clkc" for G12A,
-		  "amlogic,sm1-audio-clkc" for S905X3.
-- reg		: physical base address of the clock controller and length of
-		  memory mapped region.
-- clocks	: a list of phandle + clock-specifier pairs for the clocks listed
-		  in clock-names.
-- clock-names	: must contain the following:
-		  * "pclk" - Main peripheral bus clock
-		  may contain the following:
-		  * "mst_in[0-7]" - 8 input plls to generate clock signals
-		  * "slv_sclk[0-9]" - 10 slave bit clocks provided by external
-				      components.
-		  * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external
-				       components.
-- resets	: phandle of the internal reset line
-- #clock-cells	: should be 1.
-- #reset-cells  : should be 1 on the g12a (and following) soc family
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be
-used in device tree sources.
-
-Example:
-
-clkc_audio: clock-controller@0 {
-	compatible = "amlogic,axg-audio-clkc";
-	reg = <0x0 0x0 0x0 0xb4>;
-	#clock-cells = <1>;
-
-	clocks = <&clkc CLKID_AUDIO>,
-		 <&clkc CLKID_MPLL0>,
-		 <&clkc CLKID_MPLL1>,
-		 <&clkc CLKID_MPLL2>,
-		 <&clkc CLKID_MPLL3>,
-		 <&clkc CLKID_HIFI_PLL>,
-		 <&clkc CLKID_FCLK_DIV3>,
-		 <&clkc CLKID_FCLK_DIV4>,
-		 <&clkc CLKID_GP0_PLL>;
-	clock-names = "pclk",
-		      "mst_in0",
-		      "mst_in1",
-		      "mst_in2",
-		      "mst_in3",
-		      "mst_in4",
-		      "mst_in5",
-		      "mst_in6",
-		      "mst_in7";
-	resets = <&reset RESET_AUDIO>;
-};
diff --git a/dts/upstream/Bindings/clock/amlogic,axg-audio-clkc.yaml b/dts/upstream/Bindings/clock/amlogic,axg-audio-clkc.yaml
new file mode 100644
index 00000000000..fd7982dd4ce
--- /dev/null
+++ b/dts/upstream/Bindings/clock/amlogic,axg-audio-clkc.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,axg-audio-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG Audio Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description:
+  The Amlogic AXG audio clock controller generates and supplies clock to the
+  other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
+  devices.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,axg-audio-clkc
+      - amlogic,g12a-audio-clkc
+      - amlogic,sm1-audio-clkc
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: main peripheral bus clock
+      - description: input plls to generate clock signals N0
+      - description: input plls to generate clock signals N1
+      - description: input plls to generate clock signals N2
+      - description: input plls to generate clock signals N3
+      - description: input plls to generate clock signals N4
+      - description: input plls to generate clock signals N5
+      - description: input plls to generate clock signals N6
+      - description: input plls to generate clock signals N7
+      - description: slave bit clock N0 provided by external components
+      - description: slave bit clock N1 provided by external components
+      - description: slave bit clock N2 provided by external components
+      - description: slave bit clock N3 provided by external components
+      - description: slave bit clock N4 provided by external components
+      - description: slave bit clock N5 provided by external components
+      - description: slave bit clock N6 provided by external components
+      - description: slave bit clock N7 provided by external components
+      - description: slave bit clock N8 provided by external components
+      - description: slave bit clock N9 provided by external components
+      - description: slave sample clock N0 provided by external components
+      - description: slave sample clock N1 provided by external components
+      - description: slave sample clock N2 provided by external components
+      - description: slave sample clock N3 provided by external components
+      - description: slave sample clock N4 provided by external components
+      - description: slave sample clock N5 provided by external components
+      - description: slave sample clock N6 provided by external components
+      - description: slave sample clock N7 provided by external components
+      - description: slave sample clock N8 provided by external components
+      - description: slave sample clock N9 provided by external components
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: pclk
+      - const: mst_in0
+      - const: mst_in1
+      - const: mst_in2
+      - const: mst_in3
+      - const: mst_in4
+      - const: mst_in5
+      - const: mst_in6
+      - const: mst_in7
+      - const: slv_sclk0
+      - const: slv_sclk1
+      - const: slv_sclk2
+      - const: slv_sclk3
+      - const: slv_sclk4
+      - const: slv_sclk5
+      - const: slv_sclk6
+      - const: slv_sclk7
+      - const: slv_sclk8
+      - const: slv_sclk9
+      - const: slv_lrclk0
+      - const: slv_lrclk1
+      - const: slv_lrclk2
+      - const: slv_lrclk3
+      - const: slv_lrclk4
+      - const: slv_lrclk5
+      - const: slv_lrclk6
+      - const: slv_lrclk7
+      - const: slv_lrclk8
+      - const: slv_lrclk9
+
+  resets:
+    description: internal reset line
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,g12a-audio-clkc
+              - amlogic,sm1-audio-clkc
+    then:
+      required:
+        - '#reset-cells'
+    else:
+      properties:
+        '#reset-cells': false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-clkc.h>
+    #include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clkc_audio: clock-controller@0 {
+            compatible = "amlogic,axg-audio-clkc";
+            reg = <0x0 0x0 0x0 0xb4>;
+            #clock-cells = <1>;
+
+            clocks = <&clkc CLKID_AUDIO>,
+                     <&clkc CLKID_MPLL0>,
+                     <&clkc CLKID_MPLL1>,
+                     <&clkc CLKID_MPLL2>,
+                     <&clkc CLKID_MPLL3>,
+                     <&clkc CLKID_HIFI_PLL>,
+                     <&clkc CLKID_FCLK_DIV3>,
+                     <&clkc CLKID_FCLK_DIV4>,
+                     <&clkc CLKID_GP0_PLL>,
+                     <&slv_sclk0>,
+                     <&slv_sclk1>,
+                     <&slv_sclk2>,
+                     <&slv_sclk3>,
+                     <&slv_sclk4>,
+                     <&slv_sclk5>,
+                     <&slv_sclk6>,
+                     <&slv_sclk7>,
+                     <&slv_sclk8>,
+                     <&slv_sclk9>,
+                     <&slv_lrclk0>,
+                     <&slv_lrclk1>,
+                     <&slv_lrclk2>,
+                     <&slv_lrclk3>,
+                     <&slv_lrclk4>,
+                     <&slv_lrclk5>,
+                     <&slv_lrclk6>,
+                     <&slv_lrclk7>,
+                     <&slv_lrclk8>,
+                     <&slv_lrclk9>;
+            clock-names = "pclk",
+                          "mst_in0",
+                          "mst_in1",
+                          "mst_in2",
+                          "mst_in3",
+                          "mst_in4",
+                          "mst_in5",
+                          "mst_in6",
+                          "mst_in7",
+                          "slv_sclk0",
+                          "slv_sclk1",
+                          "slv_sclk2",
+                          "slv_sclk3",
+                          "slv_sclk4",
+                          "slv_sclk5",
+                          "slv_sclk6",
+                          "slv_sclk7",
+                          "slv_sclk8",
+                          "slv_sclk9",
+                          "slv_lrclk0",
+                          "slv_lrclk1",
+                          "slv_lrclk2",
+                          "slv_lrclk3",
+                          "slv_lrclk4",
+                          "slv_lrclk5",
+                          "slv_lrclk6",
+                          "slv_lrclk7",
+                          "slv_lrclk8",
+                          "slv_lrclk9";
+            resets = <&reset RESET_AUDIO>;
+        };
+    };
diff --git a/dts/upstream/Bindings/clock/amlogic,c3-peripherals-clkc.yaml b/dts/upstream/Bindings/clock/amlogic,c3-peripherals-clkc.yaml
new file mode 100644
index 00000000000..98e30b8c052
--- /dev/null
+++ b/dts/upstream/Bindings/clock/amlogic,c3-peripherals-clkc.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,c3-peripherals-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 series Peripheral Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Xianwei Zhao <xianwei.zhao@amlogic.com>
+  - Chuan Liu <chuan.liu@amlogic.com>
+
+properties:
+  compatible:
+    const: amlogic,c3-peripherals-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 16
+    items:
+      - description: input oscillator (usually at 24MHz)
+      - description: input oscillators multiplexer
+      - description: input fix pll
+      - description: input fclk div 2
+      - description: input fclk div 2p5
+      - description: input fclk div 3
+      - description: input fclk div 4
+      - description: input fclk div 5
+      - description: input fclk div 7
+      - description: input gp0 pll
+      - description: input gp1 pll
+      - description: input hifi pll
+      - description: input sys clk
+      - description: input axi clk
+      - description: input sys pll div 16
+      - description: input cpu clk div 16
+      - description: input pad clock for rtc clk (optional)
+
+  clock-names:
+    minItems: 16
+    items:
+      - const: xtal_24m
+      - const: oscin
+      - const: fix
+      - const: fdiv2
+      - const: fdiv2p5
+      - const: fdiv3
+      - const: fdiv4
+      - const: fdiv5
+      - const: fdiv7
+      - const: gp0
+      - const: gp1
+      - const: hifi
+      - const: sysclk
+      - const: axiclk
+      - const: sysplldiv16
+      - const: cpudiv16
+      - const: pad_osc
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@0 {
+            compatible = "amlogic,c3-peripherals-clkc";
+            reg = <0x0 0x0 0x0 0x49c>;
+            #clock-cells = <1>;
+            clocks = <&xtal_24m>,
+                     <&scmi_clk 8>,
+                     <&scmi_clk 12>,
+                     <&clkc_pll 3>,
+                     <&clkc_pll 5>,
+                     <&clkc_pll 7>,
+                     <&clkc_pll 9>,
+                     <&clkc_pll 11>,
+                     <&clkc_pll 13>,
+                     <&clkc_pll 15>,
+                     <&scmi_clk 13>,
+                     <&clkc_pll 17>,
+                     <&scmi_clk 9>,
+                     <&scmi_clk 10>,
+                     <&scmi_clk 14>,
+                     <&scmi_clk 15>;
+            clock-names = "xtal_24m",
+                          "oscin",
+                          "fix",
+                          "fdiv2",
+                          "fdiv2p5",
+                          "fdiv3",
+                          "fdiv4",
+                          "fdiv5",
+                          "fdiv7",
+                          "gp0",
+                          "gp1",
+                          "hifi",
+                          "sysclk",
+                          "axiclk",
+                          "sysplldiv16",
+                          "cpudiv16";
+        };
+    };
diff --git a/dts/upstream/Bindings/clock/amlogic,c3-pll-clkc.yaml b/dts/upstream/Bindings/clock/amlogic,c3-pll-clkc.yaml
new file mode 100644
index 00000000000..43de3c6fc1c
--- /dev/null
+++ b/dts/upstream/Bindings/clock/amlogic,c3-pll-clkc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,c3-pll-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 series PLL Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Chuan Liu <chuan.liu@amlogic.com>
+  - Xianwei Zhao <xianwei.zhao@amlogic.com>
+
+properties:
+  compatible:
+    const: amlogic,c3-pll-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input top pll
+      - description: input mclk pll
+
+  clock-names:
+    items:
+      - const: top
+      - const: mclk
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@8000 {
+            compatible = "amlogic,c3-pll-clkc";
+            reg = <0x0 0x8000 0x0 0x1a4>;
+            clocks = <&scmi_clk 2>,
+                     <&scmi_clk 5>;
+            clock-names = "top", "mclk";
+            #clock-cells = <1>;
+        };
+    };
diff --git a/dts/upstream/Bindings/clock/fsl,qoriq-clock-legacy.yaml b/dts/upstream/Bindings/clock/fsl,qoriq-clock-legacy.yaml
new file mode 100644
index 00000000000..97b96a1a582
--- /dev/null
+++ b/dts/upstream/Bindings/clock/fsl,qoriq-clock-legacy.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,qoriq-clock-legacy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Legacy Clock Block on Freescale QorIQ Platforms
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  These nodes are deprecated.  Kernels should continue to support
+  device trees with these nodes, but new device trees should not use them.
+
+  Most of the bindings are from the common clock binding[1].
+  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+  compatible:
+    enum:
+      - fsl,qoriq-core-pll-1.0
+      - fsl,qoriq-core-pll-2.0
+      - fsl,qoriq-core-mux-1.0
+      - fsl,qoriq-core-mux-2.0
+      - fsl,qoriq-sysclk-1.0
+      - fsl,qoriq-sysclk-2.0
+      - fsl,qoriq-platform-pll-1.0
+      - fsl,qoriq-platform-pll-2.0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 8
+
+  '#clock-cells':
+    minimum: 0
+    maximum: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,qoriq-sysclk-1.0
+              - fsl,qoriq-sysclk-2.0
+    then:
+      properties:
+        '#clock-cells':
+          const: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,qoriq-core-pll-1.0
+              - fsl,qoriq-core-pll-2.0
+    then:
+      properties:
+        '#clock-cells':
+          const: 1
+          description: |
+            * 0 - equal to the PLL frequency
+            * 1 - equal to the PLL frequency divided by 2
+            * 2 - equal to the PLL frequency divided by 4
+
diff --git a/dts/upstream/Bindings/clock/fsl,qoriq-clock.yaml b/dts/upstream/Bindings/clock/fsl,qoriq-clock.yaml
new file mode 100644
index 00000000000..95a3e3b2426
--- /dev/null
+++ b/dts/upstream/Bindings/clock/fsl,qoriq-clock.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,qoriq-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock Block on Freescale QorIQ Platforms
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  Freescale QorIQ chips take primary clocking input from the external
+  SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+  multiple phase locked loops (PLL) to create a variety of frequencies
+  which can then be passed to a variety of internal logic, including
+  cores and peripheral IP blocks.
+  Please refer to the Reference Manual for details.
+
+  All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+  which the chip complies.
+
+  Chassis Version    Example Chips
+  ---------------    -------------
+       1.0          p4080, p5020, p5040
+       2.0          t4240
+
+  Clock Provider
+
+  The clockgen node should act as a clock provider, though in older device
+  trees the children of the clockgen node are the clock providers.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,p2041-clockgen
+              - fsl,p3041-clockgen
+              - fsl,p4080-clockgen
+              - fsl,p5020-clockgen
+              - fsl,p5040-clockgen
+          - const: fsl,qoriq-clockgen-1.0
+      - items:
+          - enum:
+              - fsl,t1023-clockgen
+              - fsl,t1024-clockgen
+              - fsl,t1040-clockgen
+              - fsl,t1042-clockgen
+              - fsl,t2080-clockgen
+              - fsl,t2081-clockgen
+              - fsl,t4240-clockgen
+          - const: fsl,qoriq-clockgen-2.0
+      - items:
+          - enum:
+              - fsl,b4420-clockgen
+              - fsl,b4860-clockgen
+          - const: fsl,b4-clockgen
+      - items:
+          - enum:
+              - fsl,ls1012a-clockgen
+              - fsl,ls1021a-clockgen
+              - fsl,ls1028a-clockgen
+              - fsl,ls1043a-clockgen
+              - fsl,ls1046a-clockgen
+              - fsl,ls1088a-clockgen
+              - fsl,ls2080a-clockgen
+              - fsl,lx2160a-clockgen
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 2
+    description: |
+      The first cell of the clock specifier is the clock type, and the
+      second cell is the clock index for the specified type.
+
+        Type#  Name       Index Cell
+        0  sysclk          must be 0
+        1  cmux            index (n in CLKCnCSR)
+        2  hwaccel         index (n in CLKCGnHWACSR)
+        3  fman            0 for fm1, 1 for fm2
+        4  platform pll    n=pll/(n+1). For example, when n=1,
+                          that means output_freq=PLL_freq/2.
+        5  coreclk         must be 0
+
+  clock-frequency:
+    description: Input system clock frequency (SYSCLK)
+
+  clocks:
+    items:
+      - description:
+          sysclk may be provided as an input clock.  Either clock-frequency
+          or clocks must be provided.
+      - description:
+          A second input clock, called "coreclk", may be provided if
+          core PLLs are based on a different input clock from the
+          platform PLL.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: sysclk
+      - const: coreclk
+
+patternProperties:
+  '^mux[0-9]@[a-f0-9]+$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+  '^sysclk(-[a-z0-9]+)?$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+  '^pll[0-9]@[a-f0-9]+$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+  '^platform\-pll@[a-f0-9]+$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* clock provider example */
+    global-utilities@e1000 {
+        compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+        reg = <0xe1000 0x1000>;
+        clock-frequency = <133333333>;
+        #clock-cells = <2>;
+    };
+
+  - |
+    /* Legacy example */
+    global-utilities@e1000 {
+        compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+        reg = <0xe1000 0x1000>;
+        ranges = <0x0 0xe1000 0x1000>;
+        clock-frequency = <133333333>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #clock-cells = <2>;
+
+        sysclk: sysclk {
+            compatible = "fsl,qoriq-sysclk-1.0";
+            clock-output-names = "sysclk";
+            #clock-cells = <0>;
+        };
+
+        pll0: pll0@800 {
+            compatible = "fsl,qoriq-core-pll-1.0";
+            reg = <0x800 0x4>;
+            #clock-cells = <1>;
+            clocks = <&sysclk>;
+            clock-output-names = "pll0", "pll0-div2";
+        };
+
+        pll1: pll1@820 {
+            compatible = "fsl,qoriq-core-pll-1.0";
+            reg = <0x820 0x4>;
+            #clock-cells = <1>;
+            clocks = <&sysclk>;
+            clock-output-names = "pll1", "pll1-div2";
+        };
+
+        mux0: mux0@0 {
+            compatible = "fsl,qoriq-core-mux-1.0";
+            reg = <0x0 0x4>;
+            #clock-cells = <0>;
+            clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+            clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+            clock-output-names = "cmux0";
+        };
+
+        mux1: mux1@20 {
+            compatible = "fsl,qoriq-core-mux-1.0";
+            reg = <0x20 0x4>;
+            #clock-cells = <0>;
+            clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+            clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+            clock-output-names = "cmux1";
+        };
+
+        platform-pll@c00 {
+            #clock-cells = <1>;
+            reg = <0xc00 0x4>;
+            compatible = "fsl,qoriq-platform-pll-1.0";
+            clocks = <&sysclk>;
+            clock-output-names = "platform-pll", "platform-pll-div2";
+        };
+    };
diff --git a/dts/upstream/Bindings/clock/imx6q-clock.yaml b/dts/upstream/Bindings/clock/imx6q-clock.yaml
index bae4fcb3aac..cd3c04c883d 100644
--- a/dts/upstream/Bindings/clock/imx6q-clock.yaml
+++ b/dts/upstream/Bindings/clock/imx6q-clock.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX6 Quad Clock Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 properties:
   compatible:
diff --git a/dts/upstream/Bindings/clock/imx6sl-clock.yaml b/dts/upstream/Bindings/clock/imx6sl-clock.yaml
index c85ff6ea3d2..6713bbb14f3 100644
--- a/dts/upstream/Bindings/clock/imx6sl-clock.yaml
+++ b/dts/upstream/Bindings/clock/imx6sl-clock.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX6 SoloLite Clock Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 properties:
   compatible:
diff --git a/dts/upstream/Bindings/clock/imx6sll-clock.yaml b/dts/upstream/Bindings/clock/imx6sll-clock.yaml
index 6b549ed1493..6d64cf9463c 100644
--- a/dts/upstream/Bindings/clock/imx6sll-clock.yaml
+++ b/dts/upstream/Bindings/clock/imx6sll-clock.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX6 SLL Clock Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 properties:
   compatible:
diff --git a/dts/upstream/Bindings/clock/imx6sx-clock.yaml b/dts/upstream/Bindings/clock/imx6sx-clock.yaml
index 55dcad18b7c..77afa4b81cf 100644
--- a/dts/upstream/Bindings/clock/imx6sx-clock.yaml
+++ b/dts/upstream/Bindings/clock/imx6sx-clock.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX6 SoloX Clock Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 properties:
   compatible:
diff --git a/dts/upstream/Bindings/clock/imx6ul-clock.yaml b/dts/upstream/Bindings/clock/imx6ul-clock.yaml
index be54d4df5af..d57e18a210c 100644
--- a/dts/upstream/Bindings/clock/imx6ul-clock.yaml
+++ b/dts/upstream/Bindings/clock/imx6ul-clock.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX6 UltraLite Clock Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 properties:
   compatible:
diff --git a/dts/upstream/Bindings/clock/imx7d-clock.yaml b/dts/upstream/Bindings/clock/imx7d-clock.yaml
index e7d8427e495..880d602d09f 100644
--- a/dts/upstream/Bindings/clock/imx7d-clock.yaml
+++ b/dts/upstream/Bindings/clock/imx7d-clock.yaml
@@ -8,7 +8,6 @@ title: Freescale i.MX7 Dual Clock Controller
 
 maintainers:
   - Frank Li <Frank.Li@nxp.com>
-  - Anson Huang <Anson.Huang@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock
diff --git a/dts/upstream/Bindings/clock/imx8m-clock.yaml b/dts/upstream/Bindings/clock/imx8m-clock.yaml
index 80539f88bc2..c643d4a8147 100644
--- a/dts/upstream/Bindings/clock/imx8m-clock.yaml
+++ b/dts/upstream/Bindings/clock/imx8m-clock.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NXP i.MX8M Family Clock Control Module
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Abel Vesa <abelvesa@kernel.org>
+  - Peng Fan <peng.fan@nxp.com>
 
 description: |
   NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock
diff --git a/dts/upstream/Bindings/clock/mediatek,mt7622-pciesys.yaml b/dts/upstream/Bindings/clock/mediatek,mt7622-pciesys.yaml
index c77111d10f9..9c3913f9092 100644
--- a/dts/upstream/Bindings/clock/mediatek,mt7622-pciesys.yaml
+++ b/dts/upstream/Bindings/clock/mediatek,mt7622-pciesys.yaml
@@ -14,9 +14,11 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt7622-pciesys
-      - mediatek,mt7629-pciesys
+    oneOf:
+      - items:
+          - const: mediatek,mt7622-pciesys
+          - const: syscon
+      - const: mediatek,mt7629-pciesys
 
   reg:
     maxItems: 1
@@ -38,7 +40,7 @@ additionalProperties: false
 examples:
   - |
     clock-controller@1a100800 {
-        compatible = "mediatek,mt7622-pciesys";
+        compatible = "mediatek,mt7622-pciesys", "syscon";
         reg = <0x1a100800 0x1000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
diff --git a/dts/upstream/Bindings/clock/mediatek,mt8188-sys-clock.yaml b/dts/upstream/Bindings/clock/mediatek,mt8188-sys-clock.yaml
index 4cf8d3af980..db13d51a490 100644
--- a/dts/upstream/Bindings/clock/mediatek,mt8188-sys-clock.yaml
+++ b/dts/upstream/Bindings/clock/mediatek,mt8188-sys-clock.yaml
@@ -39,6 +39,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/clock/milbeaut-clock.yaml b/dts/upstream/Bindings/clock/milbeaut-clock.yaml
index 0af1c569eb3..d786f1e2d00 100644
--- a/dts/upstream/Bindings/clock/milbeaut-clock.yaml
+++ b/dts/upstream/Bindings/clock/milbeaut-clock.yaml
@@ -40,38 +40,11 @@ required:
 additionalProperties: false
 
 examples:
-  # Clock controller node:
   - |
-    m10v-clk-ctrl@1d021000 {
+    clock-controller@1d021000 {
         compatible = "socionext,milbeaut-m10v-ccu";
         reg = <0x1d021000 0x4000>;
         #clock-cells = <1>;
         clocks = <&clki40mhz>;
     };
-
-  # Required an external clock for Clock controller node:
-  - |
-    clocks {
-        clki40mhz: clki40mhz {
-            compatible = "fixed-clock";
-            #clock-cells = <0>;
-            clock-frequency = <40000000>;
-        };
-        /* other clocks */
-    };
-
-  # The clock consumer shall specify the desired clock-output of the clock
-  # controller as below by specifying output-id in its "clk" phandle cell.
-  # 2: uart
-  # 4: 32-bit timer
-  # 7: UHS-I/II
-  - |
-    serial@1e700010 {
-        compatible = "socionext,milbeaut-usio-uart";
-        reg = <0x1e700010 0x10>;
-        interrupts = <0 141 0x4>, <0 149 0x4>;
-        interrupt-names = "rx", "tx";
-        clocks = <&clk 2>;
-    };
-
 ...
diff --git a/dts/upstream/Bindings/clock/qcom,dispcc-sc8280xp.yaml b/dts/upstream/Bindings/clock/qcom,dispcc-sc8280xp.yaml
index 3cb996b2c9d..ffae037779a 100644
--- a/dts/upstream/Bindings/clock/qcom,dispcc-sc8280xp.yaml
+++ b/dts/upstream/Bindings/clock/qcom,dispcc-sc8280xp.yaml
@@ -40,31 +40,19 @@ properties:
       - description: DSI 1 PLL byte clock
       - description: DSI 1 PLL DSI clock
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
   power-domains:
     items:
       - description: MMCX power domain
 
 required:
   - compatible
-  - reg
   - clocks
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,dispcc-sm6350.yaml b/dts/upstream/Bindings/clock/qcom,dispcc-sm6350.yaml
index 8efac3fb159..46403b98411 100644
--- a/dts/upstream/Bindings/clock/qcom,dispcc-sm6350.yaml
+++ b/dts/upstream/Bindings/clock/qcom,dispcc-sm6350.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display Clock & Reset Controller on SM6350
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm display clock control module provides the clocks, resets and power
@@ -37,28 +37,16 @@ properties:
       - const: dp_phy_pll_link_clk
       - const: dp_phy_pll_vco_div_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,dispcc-sm8x50.yaml b/dts/upstream/Bindings/clock/qcom,dispcc-sm8x50.yaml
index 59cc88a52f6..53a5ab31915 100644
--- a/dts/upstream/Bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/dts/upstream/Bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -27,6 +27,7 @@ properties:
       - qcom,sm8350-dispcc
 
   clocks:
+    minItems: 7
     items:
       - description: Board XO source
       - description: Byte clock from DSI PHY0
@@ -35,8 +36,15 @@ properties:
       - description: Pixel clock from DSI PHY1
       - description: Link clock from DP PHY
       - description: VCO DIV clock from DP PHY
+      - description: Link clock from eDP PHY
+      - description: VCO DIV clock from eDP PHY
+      - description: Link clock from DP1 PHY
+      - description: VCO DIV clock from DP1 PHY
+      - description: Link clock from DP2 PHY
+      - description: VCO DIV clock from DP2 PHY
 
   clock-names:
+    minItems: 7
     items:
       - const: bi_tcxo
       - const: dsi0_phy_pll_out_byteclk
@@ -45,18 +53,12 @@ properties:
       - const: dsi1_phy_pll_out_dsiclk
       - const: dp_phy_pll_link_clk
       - const: dp_phy_pll_vco_div_clk
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+      - const: edp_phy_pll_link_clk
+      - const: edp_phy_pll_vco_div_clk
+      - const: dptx1_phy_pll_link_clk
+      - const: dptx1_phy_pll_vco_div_clk
+      - const: dptx2_phy_pll_link_clk
+      - const: dptx2_phy_pll_vco_div_clk
 
   power-domains:
     description:
@@ -70,14 +72,26 @@ properties:
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: qcom,sc8180x-dispcc
+    then:
+      properties:
+        clocks:
+          maxItems: 7
+        clock-names:
+          maxItems: 7
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-apq8064.yaml b/dts/upstream/Bindings/clock/qcom,gcc-apq8064.yaml
index 19211176ee0..27df7e3e5bf 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-apq8064.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-apq8064.yaml
@@ -69,6 +69,8 @@ properties:
     const: 1
     deprecated: true
 
+  '#power-domain-cells': false
+
 required:
   - compatible
 
@@ -81,7 +83,6 @@ examples:
       reg = <0x00900000 0x4000>;
       #clock-cells = <1>;
       #reset-cells = <1>;
-      #power-domain-cells = <1>;
 
       thermal-sensor {
         compatible = "qcom,msm8960-tsens";
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-apq8084.yaml b/dts/upstream/Bindings/clock/qcom,gcc-apq8084.yaml
index d8460826908..0a0a26d9bea 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-apq8084.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-apq8084.yaml
@@ -51,6 +51,7 @@ properties:
 
 required:
   - compatible
+  - '#power-domain-cells'
 
 unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-ipq4019.yaml b/dts/upstream/Bindings/clock/qcom,gcc-ipq4019.yaml
index fb3957d485f..012048921f9 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-ipq4019.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-ipq4019.yaml
@@ -34,6 +34,8 @@ properties:
       - const: xo
       - const: sleep_clk
 
+  '#power-domain-cells': false
+
 required:
   - compatible
 
@@ -45,7 +47,6 @@ examples:
       compatible = "qcom,gcc-ipq4019";
       reg = <0x1800000 0x60000>;
       #clock-cells = <1>;
-      #power-domain-cells = <1>;
       #reset-cells = <1>;
       clocks = <&xo>, <&sleep_clk>;
       clock-names = "xo", "sleep_clk";
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-ipq6018.yaml b/dts/upstream/Bindings/clock/qcom,gcc-ipq6018.yaml
index af5d883cfdc..4d2614d4f36 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-ipq6018.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-ipq6018.yaml
@@ -36,6 +36,8 @@ properties:
       - const: xo
       - const: sleep_clk
 
+  '#power-domain-cells': false
+
 required:
   - compatible
   - clocks
@@ -51,7 +53,6 @@ examples:
       clocks = <&xo>, <&sleep_clk>;
       clock-names = "xo", "sleep_clk";
       #clock-cells = <1>;
-      #power-domain-cells = <1>;
       #reset-cells = <1>;
     };
 ...
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-ipq8064.yaml b/dts/upstream/Bindings/clock/qcom,gcc-ipq8064.yaml
index 93f3084b97c..a71557395c0 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-ipq8064.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-ipq8064.yaml
@@ -46,6 +46,8 @@ properties:
     allOf:
       - $ref: /schemas/thermal/qcom-tsens.yaml#
 
+  '#power-domain-cells': false
+
 required:
   - compatible
   - clocks
@@ -65,7 +67,6 @@ examples:
       clock-names = "pxo", "cxo", "pll4";
       #clock-cells = <1>;
       #reset-cells = <1>;
-      #power-domain-cells = <1>;
 
       tsens: thermal-sensor {
         compatible = "qcom,ipq8064-tsens";
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-ipq8074.yaml b/dts/upstream/Bindings/clock/qcom,gcc-ipq8074.yaml
index 2d44ddc45aa..38b9e428390 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-ipq8074.yaml
@@ -39,6 +39,7 @@ properties:
 
 required:
   - compatible
+  - '#power-domain-cells'
 
 unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-other.yaml b/dts/upstream/Bindings/clock/qcom,gcc-mdm9607.yaml
index 7d05f0f63ce..d7da30b0e7e 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-other.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-mdm9607.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml#
+$id: http://devicetree.org/schemas/clock/qcom,gcc-mdm9607.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Global Clock & Reset Controller
@@ -15,7 +15,6 @@ description: |
   domains.
 
   See also::
-    include/dt-bindings/clock/qcom,gcc-msm8953.h
     include/dt-bindings/clock/qcom,gcc-mdm9607.h
 
 allOf:
@@ -28,6 +27,7 @@ properties:
 
 required:
   - compatible
+  - '#power-domain-cells'
 
 unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-mdm9615.yaml b/dts/upstream/Bindings/clock/qcom,gcc-mdm9615.yaml
new file mode 100644
index 00000000000..418dea31eb6
--- /dev/null
+++ b/dts/upstream/Bindings/clock/qcom,gcc-mdm9615.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-mdm9615.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-mdm9615.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-mdm9615
+
+  clocks:
+    items:
+      - description: CXO clock
+      - description: PLL4 from LLC
+
+  '#power-domain-cells': false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-mdm9615";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      clocks = <&cxo_board>,
+               <&lcc_pll4>;
+    };
+...
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-msm8660.yaml b/dts/upstream/Bindings/clock/qcom,gcc-msm8660.yaml
index c9e98554862..e03b6d0acdb 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-msm8660.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-msm8660.yaml
@@ -34,6 +34,8 @@ properties:
       - const: pxo
       - const: cxo
 
+  '#power-domain-cells': false
+
 required:
   - compatible
 
@@ -47,7 +49,6 @@ examples:
       reg = <0x900000 0x4000>;
       #clock-cells = <1>;
       #reset-cells = <1>;
-      #power-domain-cells = <1>;
       clocks = <&pxo_board>, <&cxo_board>;
       clock-names = "pxo", "cxo";
     };
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-msm8909.yaml b/dts/upstream/Bindings/clock/qcom,gcc-msm8909.yaml
index b91462587df..ce1f5a60bd8 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-msm8909.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-msm8909.yaml
@@ -42,6 +42,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-msm8916.yaml b/dts/upstream/Bindings/clock/qcom,gcc-msm8916.yaml
index ad84c0f7680..258b6b93dec 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-msm8916.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-msm8916.yaml
@@ -48,6 +48,7 @@ properties:
 
 required:
   - compatible
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-msm8953.yaml b/dts/upstream/Bindings/clock/qcom,gcc-msm8953.yaml
index fe9fd4cb185..fe1f5f3ed99 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-msm8953.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-msm8953.yaml
@@ -42,6 +42,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-msm8974.yaml b/dts/upstream/Bindings/clock/qcom,gcc-msm8974.yaml
index 1927aecc86b..929fafc84c1 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-msm8974.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-msm8974.yaml
@@ -41,6 +41,7 @@ properties:
 
 required:
   - compatible
+  - '#power-domain-cells'
 
 unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-msm8976.yaml b/dts/upstream/Bindings/clock/qcom,gcc-msm8976.yaml
index 62d6f1fe122..cd49704dcb9 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-msm8976.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-msm8976.yaml
@@ -49,6 +49,7 @@ required:
   - clocks
   - clock-names
   - vdd_gfx-supply
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-msm8994.yaml b/dts/upstream/Bindings/clock/qcom,gcc-msm8994.yaml
index 8f0f20c1442..10afe984e2f 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-msm8994.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-msm8994.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Global Clock & Reset Controller on MSM8994
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm global clock control module provides the clocks, resets and power
@@ -35,6 +35,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-msm8996.yaml b/dts/upstream/Bindings/clock/qcom,gcc-msm8996.yaml
index 97523cc1ecf..013fd074a8d 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-msm8996.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-msm8996.yaml
@@ -50,6 +50,7 @@ properties:
 
 required:
   - compatible
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-msm8998.yaml b/dts/upstream/Bindings/clock/qcom,gcc-msm8998.yaml
index 58f7fb22c5c..abae658c0ed 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-msm8998.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-msm8998.yaml
@@ -38,6 +38,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-qcm2290.yaml b/dts/upstream/Bindings/clock/qcom,gcc-qcm2290.yaml
index c9bec4656f6..38c4c8c61b3 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-qcm2290.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-qcm2290.yaml
@@ -33,6 +33,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-qcs404.yaml b/dts/upstream/Bindings/clock/qcom,gcc-qcs404.yaml
index 7bc6c57e4d1..94755465c1f 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-qcs404.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-qcs404.yaml
@@ -40,6 +40,7 @@ properties:
 
 required:
   - compatible
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sc7180.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sc7180.yaml
index 7aae21a7669..1847bbeaa9d 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sc7180.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sc7180.yaml
@@ -40,6 +40,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sc7280.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sc7280.yaml
index c4ca08d9ad5..4e4f68b9f6d 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sc7280.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sc7280.yaml
@@ -51,6 +51,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sc8180x.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sc8180x.yaml
index a1085ef4fd0..b4784ecaf58 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sc8180x.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sc8180x.yaml
@@ -40,6 +40,7 @@ required:
   - clocks
   - clock-names
   - power-domains
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sc8280xp.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sc8280xp.yaml
index 5681e535fed..5cfde8a4de4 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sc8280xp.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -65,6 +65,7 @@ properties:
 required:
   - compatible
   - clocks
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sdm660.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sdm660.yaml
index 52e7412aace..724ce049111 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sdm660.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sdm660.yaml
@@ -40,6 +40,7 @@ properties:
 
 required:
   - compatible
+  - '#power-domain-cells'
 
 unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sdm845.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sdm845.yaml
index 0595da0e8a4..ef0a20456e8 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sdm845.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sdm845.yaml
@@ -35,6 +35,7 @@ properties:
 
 required:
   - compatible
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sdx55.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sdx55.yaml
index 428e954d763..30819f3d85c 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sdx55.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sdx55.yaml
@@ -34,6 +34,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sdx65.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sdx65.yaml
index 523e18d7f15..91544922866 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sdx65.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sdx65.yaml
@@ -39,6 +39,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sm6115.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sm6115.yaml
index a5ad0a3da39..ecb69c707f0 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sm6115.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sm6115.yaml
@@ -33,6 +33,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sm6125.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sm6125.yaml
index 8e37623788b..1fe68e07a2b 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sm6125.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sm6125.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Global Clock & Reset Controller on SM6125
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm global clock control module provides the clocks, resets and power
@@ -33,6 +33,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sm6350.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sm6350.yaml
index d1b26ab48ea..78e232fa95d 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sm6350.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sm6350.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Global Clock & Reset Controller on SM6350
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm global clock control module provides the clocks, resets and power
@@ -35,6 +35,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sm8150.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sm8150.yaml
index 58ccb7df847..1dcf97c0c06 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sm8150.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sm8150.yaml
@@ -34,6 +34,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sm8250.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sm8250.yaml
index 5d77c092be5..979ff0a8bf6 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sm8250.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sm8250.yaml
@@ -36,6 +36,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sm8350.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sm8350.yaml
index b4fdde71ef1..594e87f5ba0 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sm8350.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sm8350.yaml
@@ -55,6 +55,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc-sm8450.yaml b/dts/upstream/Bindings/clock/qcom,gcc-sm8450.yaml
index 75259f468d5..d848361beeb 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc-sm8450.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc-sm8450.yaml
@@ -49,6 +49,7 @@ required:
   - compatible
   - clocks
   - clock-names
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,gcc.yaml b/dts/upstream/Bindings/clock/qcom,gcc.yaml
index 788825105f2..513d6fd8924 100644
--- a/dts/upstream/Bindings/clock/qcom,gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gcc.yaml
@@ -35,7 +35,6 @@ required:
   - reg
   - '#clock-cells'
   - '#reset-cells'
-  - '#power-domain-cells'
 
 additionalProperties: true
 
diff --git a/dts/upstream/Bindings/clock/qcom,gpucc-sdm660.yaml b/dts/upstream/Bindings/clock/qcom,gpucc-sdm660.yaml
index 0518ea963cd..79bb90dbe4c 100644
--- a/dts/upstream/Bindings/clock/qcom,gpucc-sdm660.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gpucc-sdm660.yaml
@@ -33,28 +33,16 @@ properties:
       - const: gcc_gpu_gpll0_clk
       - const: gcc_gpu_gpll0_div_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,gpucc.yaml b/dts/upstream/Bindings/clock/qcom,gpucc.yaml
index f57aceddac6..0858fd63528 100644
--- a/dts/upstream/Bindings/clock/qcom,gpucc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,gpucc.yaml
@@ -56,25 +56,10 @@ properties:
   vdd-gfx-supply:
     description: Regulator supply for the VDD_GFX pads
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
 # Require that power-domains and vdd-gfx-supply are not both present
@@ -83,7 +68,10 @@ not:
     - power-domains
     - vdd-gfx-supply
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,ipq5018-gcc.yaml b/dts/upstream/Bindings/clock/qcom,ipq5018-gcc.yaml
index ef84a0c95f7..489d0fc5607 100644
--- a/dts/upstream/Bindings/clock/qcom,ipq5018-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,ipq5018-gcc.yaml
@@ -33,6 +33,8 @@ properties:
       - description: UNIPHY RX clock source
       - description: UNIPHY TX clk source
 
+  '#power-domain-cells': false
+
 required:
   - compatible
   - clocks
@@ -58,6 +60,5 @@ examples:
                <&uniphy_tx_clk>;
       #clock-cells = <1>;
       #reset-cells = <1>;
-      #power-domain-cells = <1>;
     };
 ...
diff --git a/dts/upstream/Bindings/clock/qcom,ipq5332-gcc.yaml b/dts/upstream/Bindings/clock/qcom,ipq5332-gcc.yaml
index 718fe062542..adc30d84fa8 100644
--- a/dts/upstream/Bindings/clock/qcom,ipq5332-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,ipq5332-gcc.yaml
@@ -30,6 +30,8 @@ properties:
       - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
       - description: USB PCIE wrapper pipe clock source
 
+  '#power-domain-cells': false
+
 required:
   - compatible
   - clocks
@@ -47,7 +49,6 @@ examples:
                <&pcie_2lane_phy_pipe_clk_x1>,
                <&usb_pcie_wrapper_pipe_clk>;
       #clock-cells = <1>;
-      #power-domain-cells = <1>;
       #reset-cells = <1>;
     };
 ...
diff --git a/dts/upstream/Bindings/clock/qcom,ipq9574-gcc.yaml b/dts/upstream/Bindings/clock/qcom,ipq9574-gcc.yaml
index 944a0ea79cd..27ae9938feb 100644
--- a/dts/upstream/Bindings/clock/qcom,ipq9574-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,ipq9574-gcc.yaml
@@ -33,6 +33,11 @@ properties:
       - description: PCIE30 PHY3 pipe clock source
       - description: USB3 PHY pipe clock source
 
+  '#power-domain-cells': false
+
+  '#interconnect-cells':
+    const: 1
+
 required:
   - compatible
   - clocks
@@ -57,6 +62,5 @@ examples:
                <&usb3phy_0_cc_pipe_clk>;
       #clock-cells = <1>;
       #reset-cells = <1>;
-      #power-domain-cells = <1>;
     };
 ...
diff --git a/dts/upstream/Bindings/clock/qcom,msm8998-gpucc.yaml b/dts/upstream/Bindings/clock/qcom,msm8998-gpucc.yaml
index 7b271ae210a..b9b218ef9b6 100644
--- a/dts/upstream/Bindings/clock/qcom,msm8998-gpucc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,msm8998-gpucc.yaml
@@ -29,28 +29,16 @@ properties:
       - const: xo
       - const: gpll0
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,qca8k-nsscc.yaml b/dts/upstream/Bindings/clock/qcom,qca8k-nsscc.yaml
new file mode 100644
index 00000000000..61473385da2
--- /dev/null
+++ b/dts/upstream/Bindings/clock/qcom,qca8k-nsscc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qca8k-nsscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NSS Clock & Reset Controller on QCA8386/QCA8084
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Luo Jie <quic_luoj@quicinc.com>
+
+description: |
+  Qualcomm NSS clock control module provides the clocks and resets
+  on QCA8386(switch mode)/QCA8084(PHY mode)
+
+  See also::
+    include/dt-bindings/clock/qcom,qca8k-nsscc.h
+    include/dt-bindings/reset/qcom,qca8k-nsscc.h
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,qca8084-nsscc
+      - items:
+          - enum:
+              - qcom,qca8082-nsscc
+              - qcom,qca8085-nsscc
+              - qcom,qca8384-nsscc
+              - qcom,qca8385-nsscc
+              - qcom,qca8386-nsscc
+          - const: qcom,qca8084-nsscc
+
+  clocks:
+    items:
+      - description: Chip reference clock source
+      - description: UNIPHY0 RX 312P5M/125M clock source
+      - description: UNIPHY0 TX 312P5M/125M clock source
+      - description: UNIPHY1 RX 312P5M/125M clock source
+      - description: UNIPHY1 TX 312P5M/125M clock source
+      - description: UNIPHY1 RX 312P5M clock source
+      - description: UNIPHY1 TX 312P5M clock source
+
+  reg:
+    items:
+      - description: MDIO bus address for Clock & Reset Controller register
+
+  reset-gpios:
+    description: GPIO connected to the chip
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reset-gpios
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@18 {
+        compatible = "qcom,qca8084-nsscc";
+        reg = <0x18>;
+        reset-gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+        clocks = <&pcs0_pll>,
+                 <&qca8k_uniphy0_rx>,
+                 <&qca8k_uniphy0_tx>,
+                 <&qca8k_uniphy1_rx>,
+                 <&qca8k_uniphy1_tx>,
+                 <&qca8k_uniphy1_rx312p5m>,
+                 <&qca8k_uniphy1_tx312p5m>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+      };
+    };
+...
diff --git a/dts/upstream/Bindings/clock/qcom,qcm2290-dispcc.yaml b/dts/upstream/Bindings/clock/qcom,qcm2290-dispcc.yaml
index 4a00f2d4168..243be4f76db 100644
--- a/dts/upstream/Bindings/clock/qcom,qcm2290-dispcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,qcm2290-dispcc.yaml
@@ -37,28 +37,16 @@ properties:
       - const: dsi0_phy_pll_out_byteclk
       - const: dsi0_phy_pll_out_dsiclk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,qcm2290-gpucc.yaml b/dts/upstream/Bindings/clock/qcom,qcm2290-gpucc.yaml
new file mode 100644
index 00000000000..734880805c1
--- /dev/null
+++ b/dts/upstream/Bindings/clock/qcom,qcm2290-gpucc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcm2290-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on QCM2290
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,qcm2290-gpucc.h
+
+properties:
+  compatible:
+    const: qcom,qcm2290-gpucc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AHB interface clock,
+      - description: SoC CXO clock
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the CX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required CX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,qcm2290-gpucc";
+            reg = <0x0 0x05990000 0x0 0x9000>;
+            clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+            required-opps = <&rpmpd_opp_low_svs>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/clock/qcom,qdu1000-gcc.yaml b/dts/upstream/Bindings/clock/qcom,qdu1000-gcc.yaml
index d712b1a87e2..86befef0265 100644
--- a/dts/upstream/Bindings/clock/qcom,qdu1000-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,qdu1000-gcc.yaml
@@ -31,6 +31,7 @@ properties:
 required:
   - compatible
   - clocks
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,sa8775p-gcc.yaml b/dts/upstream/Bindings/clock/qcom,sa8775p-gcc.yaml
index 0f641c235b1..addbd323fa6 100644
--- a/dts/upstream/Bindings/clock/qcom,sa8775p-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sa8775p-gcc.yaml
@@ -46,6 +46,7 @@ properties:
 required:
   - compatible
   - clocks
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,sc7180-dispcc.yaml b/dts/upstream/Bindings/clock/qcom,sc7180-dispcc.yaml
index 1c9ce300a43..0d8ea44d814 100644
--- a/dts/upstream/Bindings/clock/qcom,sc7180-dispcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sc7180-dispcc.yaml
@@ -37,28 +37,16 @@ properties:
       - const: dp_phy_pll_link_clk
       - const: dp_phy_pll_vco_div_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,sc7280-dispcc.yaml b/dts/upstream/Bindings/clock/qcom,sc7280-dispcc.yaml
index c42b0ef6138..23177661be4 100644
--- a/dts/upstream/Bindings/clock/qcom,sc7280-dispcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sc7280-dispcc.yaml
@@ -41,28 +41,16 @@ properties:
       - const: edp_phy_pll_link_clk
       - const: edp_phy_pll_vco_div_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,sdm845-dispcc.yaml b/dts/upstream/Bindings/clock/qcom,sdm845-dispcc.yaml
index 719844d7ea1..220f4004f7f 100644
--- a/dts/upstream/Bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sdm845-dispcc.yaml
@@ -46,28 +46,16 @@ properties:
       - const: dp_link_clk_divsel_ten
       - const: dp_vco_divided_clk_src_mux
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,sdx75-gcc.yaml b/dts/upstream/Bindings/clock/qcom,sdx75-gcc.yaml
index 98921fa236b..567182aba30 100644
--- a/dts/upstream/Bindings/clock/qcom,sdx75-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sdx75-gcc.yaml
@@ -41,6 +41,7 @@ properties:
 required:
   - compatible
   - clocks
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,sm4450-gcc.yaml b/dts/upstream/Bindings/clock/qcom,sm4450-gcc.yaml
index 5953c8d9243..0ac92d7871e 100644
--- a/dts/upstream/Bindings/clock/qcom,sm4450-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm4450-gcc.yaml
@@ -32,6 +32,7 @@ properties:
 required:
   - compatible
   - clocks
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,sm6115-dispcc.yaml b/dts/upstream/Bindings/clock/qcom,sm6115-dispcc.yaml
index f802a2e7f81..00be36683eb 100644
--- a/dts/upstream/Bindings/clock/qcom,sm6115-dispcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm6115-dispcc.yaml
@@ -28,27 +28,15 @@ properties:
       - description: Pixel clock from DSI PHY0
       - description: GPLL0 DISP DIV clock from GCC
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,sm6115-gpucc.yaml b/dts/upstream/Bindings/clock/qcom,sm6115-gpucc.yaml
index cf19f44af77..4ff17a91344 100644
--- a/dts/upstream/Bindings/clock/qcom,sm6115-gpucc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm6115-gpucc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Graphics Clock & Reset Controller on SM6115
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm graphics clock control module provides clocks, resets and power
diff --git a/dts/upstream/Bindings/clock/qcom,sm6125-gpucc.yaml b/dts/upstream/Bindings/clock/qcom,sm6125-gpucc.yaml
index 374a1844a15..10a9c96a97b 100644
--- a/dts/upstream/Bindings/clock/qcom,sm6125-gpucc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm6125-gpucc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Graphics Clock & Reset Controller on SM6125
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm graphics clock control module provides clocks and power domains on
diff --git a/dts/upstream/Bindings/clock/qcom,sm6350-camcc.yaml b/dts/upstream/Bindings/clock/qcom,sm6350-camcc.yaml
index fd6658cb793..c03b30f64f3 100644
--- a/dts/upstream/Bindings/clock/qcom,sm6350-camcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm6350-camcc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Camera Clock & Reset Controller on SM6350
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm camera clock control module provides the clocks, resets and  power
diff --git a/dts/upstream/Bindings/clock/qcom,sm6375-dispcc.yaml b/dts/upstream/Bindings/clock/qcom,sm6375-dispcc.yaml
index 183b1c75dbd..3cd422a645f 100644
--- a/dts/upstream/Bindings/clock/qcom,sm6375-dispcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm6375-dispcc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display Clock & Reset Controller on SM6375
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm display clock control module provides the clocks, resets and power
diff --git a/dts/upstream/Bindings/clock/qcom,sm6375-gcc.yaml b/dts/upstream/Bindings/clock/qcom,sm6375-gcc.yaml
index 295d4bb1a96..de4e9066eeb 100644
--- a/dts/upstream/Bindings/clock/qcom,sm6375-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm6375-gcc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Global Clock & Reset Controller on SM6375
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm global clock control module provides the clocks, resets and power
@@ -31,6 +31,7 @@ properties:
 required:
   - compatible
   - clocks
+  - '#power-domain-cells'
 
 unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/clock/qcom,sm6375-gpucc.yaml b/dts/upstream/Bindings/clock/qcom,sm6375-gpucc.yaml
index cf4cad76f6c..d9dd479c17b 100644
--- a/dts/upstream/Bindings/clock/qcom,sm6375-gpucc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm6375-gpucc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Graphics Clock & Reset Controller on SM6375
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm graphics clock control module provides clocks, resets and power
diff --git a/dts/upstream/Bindings/clock/qcom,sm7150-camcc.yaml b/dts/upstream/Bindings/clock/qcom,sm7150-camcc.yaml
new file mode 100644
index 00000000000..7be4b10c430
--- /dev/null
+++ b/dts/upstream/Bindings/clock/qcom,sm7150-camcc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM7150
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - David Wronek <david@mainlining.org>
+  - Jens Reidel <adrian@travitia.xyz>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SM7150.
+
+  See also:: include/dt-bindings/clock/qcom,sm7150-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm7150-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+  power-domains:
+    maxItems: 1
+    description:
+      CX power domain.
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm7150-camcc";
+      reg = <0xad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/upstream/Bindings/clock/qcom,sm7150-dispcc.yaml b/dts/upstream/Bindings/clock/qcom,sm7150-dispcc.yaml
new file mode 100644
index 00000000000..b8d6e1d05ce
--- /dev/null
+++ b/dts/upstream/Bindings/clock/qcom,sm7150-dispcc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM7150
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - David Wronek <david@mainlining.org>
+  - Jens Reidel <adrian@travitia.xyz>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM7150.
+
+  See also:: include/dt-bindings/clock/qcom,sm7150-dispcc.h
+
+properties:
+  compatible:
+    const: qcom,sm7150-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: GPLL0 source from GCC
+      - description: Sleep clock source
+      - description: Byte clock from MDSS DSI PHY0
+      - description: Pixel clock from MDSS DSI PHY0
+      - description: Byte clock from MDSS DSI PHY1
+      - description: Pixel clock from MDSS DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  power-domains:
+    maxItems: 1
+    description:
+      CX power domain.
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm7150-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm7150-dispcc";
+      reg = <0x0af00000 0x200000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&sleep_clk>,
+               <&mdss_dsi0_phy 0>,
+               <&mdss_dsi0_phy 1>,
+               <&mdss_dsi1_phy 0>,
+               <&mdss_dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/upstream/Bindings/clock/qcom,sm7150-gcc.yaml b/dts/upstream/Bindings/clock/qcom,sm7150-gcc.yaml
index 0eb76d9d51c..4d7bbbf4ce8 100644
--- a/dts/upstream/Bindings/clock/qcom,sm7150-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm7150-gcc.yaml
@@ -30,6 +30,7 @@ properties:
 required:
   - compatible
   - clocks
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,sm7150-videocc.yaml b/dts/upstream/Bindings/clock/qcom,sm7150-videocc.yaml
new file mode 100644
index 00000000000..037ffc71e70
--- /dev/null
+++ b/dts/upstream/Bindings/clock/qcom,sm7150-videocc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on SM7150
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - David Wronek <david@mainlining.org>
+  - Jens Reidel <adrian@travitia.xyz>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on SM7150.
+
+  See also:: include/dt-bindings/clock/qcom,videocc-sm7150.h
+
+properties:
+  compatible:
+    const: qcom,sm7150-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+
+  power-domains:
+    maxItems: 1
+    description:
+      CX power domain.
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    videocc: clock-controller@ab00000 {
+      compatible = "qcom,sm7150-videocc";
+      reg = <0x0ab00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/upstream/Bindings/clock/qcom,sm8350-videocc.yaml b/dts/upstream/Bindings/clock/qcom,sm8350-videocc.yaml
index 46d1d91e3a0..5c2ecec0624 100644
--- a/dts/upstream/Bindings/clock/qcom,sm8350-videocc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm8350-videocc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm SM8350 Video Clock & Reset Controller
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm video clock control module provides the clocks, resets and power
diff --git a/dts/upstream/Bindings/clock/qcom,sm8450-camcc.yaml b/dts/upstream/Bindings/clock/qcom,sm8450-camcc.yaml
index fa0e5b6b02b..f58edfc10f4 100644
--- a/dts/upstream/Bindings/clock/qcom,sm8450-camcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm8450-camcc.yaml
@@ -8,15 +8,17 @@ title: Qualcomm Camera Clock & Reset Controller on SM8450
 
 maintainers:
   - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+  - Jagadeesh Kona <quic_jkona@quicinc.com>
 
 description: |
   Qualcomm camera clock control module provides the clocks, resets and power
   domains on SM8450.
 
-  See also::
+  See also:
+    include/dt-bindings/clock/qcom,sc8280xp-camcc.h
     include/dt-bindings/clock/qcom,sm8450-camcc.h
     include/dt-bindings/clock/qcom,sm8550-camcc.h
-    include/dt-bindings/clock/qcom,sc8280xp-camcc.h
+    include/dt-bindings/clock/qcom,sm8650-camcc.h
     include/dt-bindings/clock/qcom,x1e80100-camcc.h
 
 allOf:
@@ -28,6 +30,7 @@ properties:
       - qcom,sc8280xp-camcc
       - qcom,sm8450-camcc
       - qcom,sm8550-camcc
+      - qcom,sm8650-camcc
       - qcom,x1e80100-camcc
 
   clocks:
diff --git a/dts/upstream/Bindings/clock/qcom,sm8450-dispcc.yaml b/dts/upstream/Bindings/clock/qcom,sm8450-dispcc.yaml
index 2f22310b08a..4794c53793a 100644
--- a/dts/upstream/Bindings/clock/qcom,sm8450-dispcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm8450-dispcc.yaml
@@ -40,18 +40,6 @@ properties:
       - description: Link clock from DP PHY3
       - description: VCO DIV clock from DP PHY3
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
   power-domains:
     description:
       A phandle and PM domain specifier for the MMCX power domain.
@@ -64,13 +52,13 @@ properties:
 
 required:
   - compatible
-  - reg
   - clocks
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,sm8450-gpucc.yaml b/dts/upstream/Bindings/clock/qcom,sm8450-gpucc.yaml
index 36974309cf6..d10bb002906 100644
--- a/dts/upstream/Bindings/clock/qcom,sm8450-gpucc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm8450-gpucc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Graphics Clock & Reset Controller on SM8450
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm graphics clock control module provides the clocks, resets and power
@@ -34,27 +34,15 @@ properties:
       - description: GPLL0 main branch source
       - description: GPLL0 div branch source
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,sm8450-videocc.yaml b/dts/upstream/Bindings/clock/qcom,sm8450-videocc.yaml
index bad8f019a8d..b2792b4bb55 100644
--- a/dts/upstream/Bindings/clock/qcom,sm8450-videocc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm8450-videocc.yaml
@@ -8,21 +8,22 @@ title: Qualcomm Video Clock & Reset Controller on SM8450
 
 maintainers:
   - Taniya Das <quic_tdas@quicinc.com>
+  - Jagadeesh Kona <quic_jkona@quicinc.com>
 
 description: |
   Qualcomm video clock control module provides the clocks, resets and power
   domains on SM8450.
 
-  See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h
+  See also:
+    include/dt-bindings/clock/qcom,sm8450-videocc.h
+    include/dt-bindings/clock/qcom,sm8650-videocc.h
 
 properties:
   compatible:
     enum:
       - qcom,sm8450-videocc
       - qcom,sm8550-videocc
-
-  reg:
-    maxItems: 1
+      - qcom,sm8650-videocc
 
   clocks:
     items:
@@ -39,26 +40,17 @@ properties:
     description:
       A phandle to an OPP node describing required MMCX performance point.
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - power-domains
   - required-opps
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,sm8550-dispcc.yaml b/dts/upstream/Bindings/clock/qcom,sm8550-dispcc.yaml
index bad0260764d..c17035a180d 100644
--- a/dts/upstream/Bindings/clock/qcom,sm8550-dispcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm8550-dispcc.yaml
@@ -45,18 +45,6 @@ properties:
       - description: Link clock from DP PHY3
       - description: VCO DIV clock from DP PHY3
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
   power-domains:
     description:
       A phandle and PM domain specifier for the MMCX power domain.
@@ -69,13 +57,13 @@ properties:
 
 required:
   - compatible
-  - reg
   - clocks
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,sm8550-gcc.yaml b/dts/upstream/Bindings/clock/qcom,sm8550-gcc.yaml
index 0c706de31cf..d83b64dcce4 100644
--- a/dts/upstream/Bindings/clock/qcom,sm8550-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm8550-gcc.yaml
@@ -34,6 +34,7 @@ properties:
 required:
   - compatible
   - clocks
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,sm8650-gcc.yaml b/dts/upstream/Bindings/clock/qcom,sm8650-gcc.yaml
index b54761cc867..976f29cce80 100644
--- a/dts/upstream/Bindings/clock/qcom,sm8650-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,sm8650-gcc.yaml
@@ -35,6 +35,7 @@ properties:
 required:
   - compatible
   - clocks
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qcom,videocc.yaml b/dts/upstream/Bindings/clock/qcom,videocc.yaml
index 6999e36ace1..340c7e5cf98 100644
--- a/dts/upstream/Bindings/clock/qcom,videocc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,videocc.yaml
@@ -37,18 +37,6 @@ properties:
     minItems: 1
     maxItems: 3
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
   power-domains:
     description:
       A phandle and PM domain specifier for the MMCX power domain.
@@ -61,21 +49,19 @@ properties:
 
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
   - '#power-domain-cells'
 
 allOf:
+  - $ref: qcom,gcc.yaml#
+
   - if:
       properties:
         compatible:
           enum:
             - qcom,sc7180-videocc
             - qcom,sdm845-videocc
-            - qcom,sm8150-videocc
     then:
       properties:
         clocks:
@@ -105,6 +91,22 @@ allOf:
       properties:
         compatible:
           enum:
+            - qcom,sm8150-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AHB
+            - description: Board XO source
+        clock-names:
+          items:
+            - const: iface
+            - const: bi_tcxo
+
+  - if:
+      properties:
+        compatible:
+          enum:
             - qcom,sm8250-videocc
     then:
       properties:
@@ -119,7 +121,7 @@ allOf:
             - const: bi_tcxo
             - const: bi_tcxo_ao
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/clock/qcom,x1e80100-gcc.yaml b/dts/upstream/Bindings/clock/qcom,x1e80100-gcc.yaml
index 14a796dbf8b..5951a60ab08 100644
--- a/dts/upstream/Bindings/clock/qcom,x1e80100-gcc.yaml
+++ b/dts/upstream/Bindings/clock/qcom,x1e80100-gcc.yaml
@@ -41,6 +41,7 @@ required:
   - compatible
   - clocks
   - power-domains
+  - '#power-domain-cells'
 
 allOf:
   - $ref: qcom,gcc.yaml#
diff --git a/dts/upstream/Bindings/clock/qoriq-clock.txt b/dts/upstream/Bindings/clock/qoriq-clock.txt
deleted file mode 100644
index 10119d9ef4b..00000000000
--- a/dts/upstream/Bindings/clock/qoriq-clock.txt
+++ /dev/null
@@ -1,212 +0,0 @@
-* Clock Block on Freescale QorIQ Platforms
-
-Freescale QorIQ chips take primary clocking input from the external
-SYSCLK signal. The SYSCLK input (frequency) is multiplied using
-multiple phase locked loops (PLL) to create a variety of frequencies
-which can then be passed to a variety of internal logic, including
-cores and peripheral IP blocks.
-Please refer to the Reference Manual for details.
-
-All references to "1.0" and "2.0" refer to the QorIQ chassis version to
-which the chip complies.
-
-Chassis Version		Example Chips
----------------		-------------
-1.0			p4080, p5020, p5040
-2.0			t4240, b4860
-
-1. Clock Block Binding
-
-Required properties:
-- compatible: Should contain a chip-specific clock block compatible
-	string and (if applicable) may contain a chassis-version clock
-	compatible string.
-
-	Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
-	* "fsl,p2041-clockgen"
-	* "fsl,p3041-clockgen"
-	* "fsl,p4080-clockgen"
-	* "fsl,p5020-clockgen"
-	* "fsl,p5040-clockgen"
-	* "fsl,t1023-clockgen"
-	* "fsl,t1024-clockgen"
-	* "fsl,t1040-clockgen"
-	* "fsl,t1042-clockgen"
-	* "fsl,t2080-clockgen"
-	* "fsl,t2081-clockgen"
-	* "fsl,t4240-clockgen"
-	* "fsl,b4420-clockgen"
-	* "fsl,b4860-clockgen"
-	* "fsl,ls1012a-clockgen"
-	* "fsl,ls1021a-clockgen"
-	* "fsl,ls1028a-clockgen"
-	* "fsl,ls1043a-clockgen"
-	* "fsl,ls1046a-clockgen"
-	* "fsl,ls1088a-clockgen"
-	* "fsl,ls2080a-clockgen"
-	* "fsl,lx2160a-clockgen"
-	Chassis-version clock strings include:
-	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
-	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
-- reg: Describes the address of the device's resources within the
-	address space defined by its parent bus, and resource zero
-	represents the clock register set
-
-Optional properties:
-- ranges: Allows valid translation between child's address space and
-	parent's. Must be present if the device has sub-nodes.
-- #address-cells: Specifies the number of cells used to represent
-	physical base addresses.  Must be present if the device has
-	sub-nodes and set to 1 if present
-- #size-cells: Specifies the number of cells used to represent
-	the size of an address. Must be present if the device has
-	sub-nodes and set to 1 if present
-- clock-frequency: Input system clock frequency (SYSCLK)
-- clocks: If clock-frequency is not specified, sysclk may be provided
-	as an input clock.  Either clock-frequency or clocks must be
-	provided.
-	A second input clock, called "coreclk", may be provided if
-	core PLLs are based on a different input clock from the
-	platform PLL.
-- clock-names: Required if a coreclk is present.  Valid names are
-	"sysclk" and "coreclk".
-
-2. Clock Provider
-
-The clockgen node should act as a clock provider, though in older device
-trees the children of the clockgen node are the clock providers.
-
-When the clockgen node is a clock provider, #clock-cells = <2>.
-The first cell of the clock specifier is the clock type, and the
-second cell is the clock index for the specified type.
-
-	Type#	Name		Index Cell
-	0	sysclk		must be 0
-	1	cmux		index (n in CLKCnCSR)
-	2	hwaccel		index (n in CLKCGnHWACSR)
-	3	fman		0 for fm1, 1 for fm2
-	4	platform pll	n=pll/(n+1). For example, when n=1,
-				that means output_freq=PLL_freq/2.
-	5	coreclk		must be 0
-
-3. Example
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
-		clock-frequency = <133333333>;
-		reg = <0xe1000 0x1000>;
-		#clock-cells = <2>;
-	};
-
-	fman@400000 {
-		...
-		clocks = <&clockgen 3 0>;
-		...
-	};
-}
-4. Legacy Child Nodes
-
-NOTE: These nodes are deprecated.  Kernels should continue to support
-device trees with these nodes, but new device trees should not use them.
-
-Most of the bindings are from the common clock binding[1].
- [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : Should include one of the following:
-	* "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
-	* "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
-	* "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
-	* "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
-	* "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
-		It takes parent's clock-frequency as its clock.
-	* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
-		It takes parent's clock-frequency as its clock.
-	* "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
-	* "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
-- #clock-cells: From common clock binding. The number of cells in a
-	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
-	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
-	For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
-	clock-specifier cell may take the following values:
-	* 0 - equal to the PLL frequency
-	* 1 - equal to the PLL frequency divided by 2
-	* 2 - equal to the PLL frequency divided by 4
-
-Recommended properties:
-- clocks: Should be the phandle of input parent clock
-- clock-names: From common clock binding, indicates the clock name
-- clock-output-names: From common clock binding, indicates the names of
-	output clocks
-- reg: Should be the offset and length of clock block base address.
-	The length should be 4.
-
-Legacy Example:
-/ {
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		clock-frequency = <133333333>;
-		reg = <0xe1000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-1.0";
-			clock-output-names = "sysclk";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1@20 {
-			#clock-cells = <0>;
-			reg = <0x20 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux1";
-		};
-
-		platform-pll: platform-pll@c00 {
-			#clock-cells = <1>;
-			reg = <0xc00 0x4>;
-			compatible = "fsl,qoriq-platform-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "platform-pll", "platform-pll-div2";
-		};
-	};
-};
-
-Example for legacy clock consumer:
-
-/ {
-	cpu0: PowerPC,e5500@0 {
-		...
-		clocks = <&mux0>;
-		...
-	};
-};
diff --git a/dts/upstream/Bindings/clock/renesas,rzg2l-cpg.yaml b/dts/upstream/Bindings/clock/renesas,rzg2l-cpg.yaml
index 4e3b0c45124..0440f23da05 100644
--- a/dts/upstream/Bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/dts/upstream/Bindings/clock/renesas,rzg2l-cpg.yaml
@@ -62,7 +62,7 @@ properties:
 
   '#reset-cells':
     description:
-      The single reset specifier cell must be the module number, as defined in
+      The single reset specifier cell must be the reset number, as defined in
       <dt-bindings/clock/r9a0*-cpg.h>.
     const: 1
 
diff --git a/dts/upstream/Bindings/clock/sophgo,sg2042-clkgen.yaml b/dts/upstream/Bindings/clock/sophgo,sg2042-clkgen.yaml
new file mode 100644
index 00000000000..e7a9255bcb5
--- /dev/null
+++ b/dts/upstream/Bindings/clock/sophgo,sg2042-clkgen.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2042-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 Clock Generator for divider/mux/gate
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-clkgen
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main PLL
+      - description: Fixed PLL
+      - description: DDR PLL 0
+      - description: DDR PLL 1
+
+  clock-names:
+    items:
+      - const: mpll
+      - const: fpll
+      - const: dpll0
+      - const: dpll1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,sg2042-clkgen.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@30012000 {
+      compatible = "sophgo,sg2042-clkgen";
+      reg = <0x30012000 0x1000>;
+      clocks = <&pllclk 0>,
+               <&pllclk 1>,
+               <&pllclk 2>,
+               <&pllclk 3>;
+      clock-names = "mpll",
+                    "fpll",
+                    "dpll0",
+                    "dpll1";
+      #clock-cells = <1>;
+    };
diff --git a/dts/upstream/Bindings/clock/sophgo,sg2042-pll.yaml b/dts/upstream/Bindings/clock/sophgo,sg2042-pll.yaml
new file mode 100644
index 00000000000..1a417a627dd
--- /dev/null
+++ b/dts/upstream/Bindings/clock/sophgo,sg2042-pll.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2042-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 PLL Clock Generator
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-pll
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Oscillator(Clock Generation IC) for Main/Fixed PLL (25 MHz)
+      - description: Oscillator(Clock Generation IC) for DDR PLL 0 (25 MHz)
+      - description: Oscillator(Clock Generation IC) for DDR PLL 1 (25 MHz)
+
+  clock-names:
+    items:
+      - const: cgi_main
+      - const: cgi_dpll0
+      - const: cgi_dpll1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,sg2042-pll.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@10000000 {
+      compatible = "sophgo,sg2042-pll";
+      reg = <0x10000000 0x10000>;
+      clocks = <&cgi_main>, <&cgi_dpll0>, <&cgi_dpll1>;
+      clock-names = "cgi_main", "cgi_dpll0", "cgi_dpll1";
+      #clock-cells = <1>;
+    };
diff --git a/dts/upstream/Bindings/clock/sophgo,sg2042-rpgate.yaml b/dts/upstream/Bindings/clock/sophgo,sg2042-rpgate.yaml
new file mode 100644
index 00000000000..1491fb8ef6a
--- /dev/null
+++ b/dts/upstream/Bindings/clock/sophgo,sg2042-rpgate.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sophgo,sg2042-rpgate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 Gate Clock Generator for RP(riscv processors) subsystem
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-rpgate
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Gate clock for RP subsystem
+
+  clock-names:
+    items:
+      - const: rpgate
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/sophgo,sg2042-rpgate.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@20000000 {
+      compatible = "sophgo,sg2042-rpgate";
+      reg = <0x20000000 0x10000>;
+      clocks = <&clkgen 85>;
+      clock-names = "rpgate";
+      #clock-cells = <1>;
+    };
diff --git a/dts/upstream/Bindings/clock/sprd,sc9860-clk.txt b/dts/upstream/Bindings/clock/sprd,sc9860-clk.txt
deleted file mode 100644
index aaaf02ca2a6..00000000000
--- a/dts/upstream/Bindings/clock/sprd,sc9860-clk.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Spreadtrum SC9860 Clock Binding
-------------------------
-
-Required properties:
-- compatible: should contain the following compatible strings:
-	- "sprd,sc9860-pmu-gate"
-	- "sprd,sc9860-pll"
-	- "sprd,sc9860-ap-clk"
-	- "sprd,sc9860-aon-prediv"
-	- "sprd,sc9860-apahb-gate"
-	- "sprd,sc9860-aon-gate"
-	- "sprd,sc9860-aonsecure-clk"
-	- "sprd,sc9860-agcp-gate"
-	- "sprd,sc9860-gpu-clk"
-	- "sprd,sc9860-vsp-clk"
-	- "sprd,sc9860-vsp-gate"
-	- "sprd,sc9860-cam-clk"
-	- "sprd,sc9860-cam-gate"
-	- "sprd,sc9860-disp-clk"
-	- "sprd,sc9860-disp-gate"
-	- "sprd,sc9860-apapb-gate"
-
-- #clock-cells: must be 1
-
-- clocks : Should be the input parent clock(s) phandle for the clock, this
-	   property here just simply shows which clock group the clocks'
-	   parents are in, since each clk node would represent many clocks
-	   which are defined in the driver.  The detailed dependency
-	   relationship (i.e. how many parents and which are the parents)
-	   are implemented in driver code.
-
-Optional properties:
-
-- reg:	Contain the registers base address and length. It must be configured
-	only if no 'sprd,syscon' under the node.
-
-- sprd,syscon: phandle to the syscon which is in the same address area with
-	       the clock, and so we can get regmap for the clocks from the
-	       syscon device.
-
-Example:
-
-	pmu_gate: pmu-gate {
-		compatible = "sprd,sc9860-pmu-gate";
-		sprd,syscon = <&pmu_regs>;
-		clocks = <&ext_26m>;
-		#clock-cells = <1>;
-	};
-
-	pll: pll {
-		compatible = "sprd,sc9860-pll";
-		sprd,syscon = <&ana_regs>;
-		clocks = <&pmu_gate 0>;
-		#clock-cells = <1>;
-	};
-
-	ap_clk: clock-controller@20000000 {
-		compatible = "sprd,sc9860-ap-clk";
-		reg = <0 0x20000000 0 0x400>;
-		clocks = <&ext_26m>, <&pll 0>,
-			 <&pmu_gate 0>;
-		#clock-cells = <1>;
-	};
diff --git a/dts/upstream/Bindings/clock/sprd,sc9860-clk.yaml b/dts/upstream/Bindings/clock/sprd,sc9860-clk.yaml
new file mode 100644
index 00000000000..502cd723511
--- /dev/null
+++ b/dts/upstream/Bindings/clock/sprd,sc9860-clk.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sprd,sc9860-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC9860 clock
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc9860-agcp-gate
+      - sprd,sc9860-aonsecure-clk
+      - sprd,sc9860-aon-gate
+      - sprd,sc9860-aon-prediv
+      - sprd,sc9860-apahb-gate
+      - sprd,sc9860-apapb-gate
+      - sprd,sc9860-ap-clk
+      - sprd,sc9860-cam-clk
+      - sprd,sc9860-cam-gate
+      - sprd,sc9860-disp-clk
+      - sprd,sc9860-disp-gate
+      - sprd,sc9860-gpu-clk
+      - sprd,sc9860-pll
+      - sprd,sc9860-pmu-gate
+      - sprd,sc9860-vsp-clk
+      - sprd,sc9860-vsp-gate
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  '#clock-cells':
+    const: 1
+
+  sprd,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the syscon which is in the same address area with the
+      clock, and so we can get regmap for the clocks from the syscon device
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sprd,sc9860-agcp-gate
+              - sprd,sc9860-aon-gate
+              - sprd,sc9860-apahb-gate
+              - sprd,sc9860-apapb-gate
+              - sprd,sc9860-cam-gate
+              - sprd,sc9860-disp-gate
+              - sprd,sc9860-gpu-clk
+              - sprd,sc9860-pll
+              - sprd,sc9860-pmu-gate
+              - sprd,sc9860-vsp-gate
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sprd,sc9860-aonsecure-clk
+              - sprd,sc9860-cam-clk
+              - sprd,sc9860-disp-clk
+              - sprd,sc9860-vsp-clk
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sprd,sc9860-aon-prediv
+              - sprd,sc9860-ap-clk
+    then:
+      properties:
+        clocks:
+          minItems: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sprd,sc9860-aonsecure-clk
+              - sprd,sc9860-aon-prediv
+              - sprd,sc9860-ap-clk
+              - sprd,sc9860-cam-clk
+              - sprd,sc9860-disp-clk
+              - sprd,sc9860-gpu-clk
+              - sprd,sc9860-vsp-clk
+    then:
+      required:
+        - reg
+      properties:
+        sprd,syscon: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sprd,sc9860-agcp-gate
+              - sprd,sc9860-aon-gate
+              - sprd,sc9860-apahb-gate
+              - sprd,sc9860-apapb-gate
+              - sprd,sc9860-cam-gate
+              - sprd,sc9860-disp-gate
+              - sprd,sc9860-pll
+              - sprd,sc9860-pmu-gate
+              - sprd,sc9860-vsp-gate
+    then:
+      required:
+        - sprd,syscon
+      properties:
+        reg: false
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pmu-gate {
+        compatible = "sprd,sc9860-pmu-gate";
+        clocks = <&ext_26m>;
+        #clock-cells = <1>;
+        sprd,syscon = <&pmu_regs>;
+      };
+
+      clock-controller@20000000 {
+        compatible = "sprd,sc9860-ap-clk";
+        reg = <0 0x20000000 0 0x400>;
+        clocks = <&ext_26m>, <&pll 0>, <&pmu_gate 0>;
+        #clock-cells = <1>;
+      };
+    };
+...
diff --git a/dts/upstream/Bindings/clock/stericsson,abx500.txt b/dts/upstream/Bindings/clock/stericsson,abx500.txt
deleted file mode 100644
index dbaa886b223..00000000000
--- a/dts/upstream/Bindings/clock/stericsson,abx500.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Clock bindings for ST-Ericsson ABx500 clocks
-
-Required properties :
-- compatible : shall contain the following:
-  "stericsson,ab8500-clk"
-- #clock-cells should be <1>
-
-The ABx500 clocks need to be placed as a subnode of an AB8500
-device node, see mfd/ab8500.txt
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/ste-ab8500.h header and can be used in device
-tree sources.
-
-Example:
-
-clock-controller {
-	compatible = "stericsson,ab8500-clk";
-	#clock-cells = <1>;
-};
diff --git a/dts/upstream/Bindings/clock/thead,th1520-clk-ap.yaml b/dts/upstream/Bindings/clock/thead,th1520-clk-ap.yaml
new file mode 100644
index 00000000000..0129bd0ba4b
--- /dev/null
+++ b/dts/upstream/Bindings/clock/thead,th1520-clk-ap.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/thead,th1520-clk-ap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD TH1520 AP sub-system clock controller
+
+description: |
+  The T-HEAD TH1520 AP sub-system clock controller configures the
+  CPU, DPU, GMAC and TEE PLLs.
+
+  SoC reference manual
+  https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+  - Wei Fu <wefu@redhat.com>
+  - Drew Fustini <dfustini@tenstorrent.com>
+
+properties:
+  compatible:
+    const: thead,th1520-clk-ap
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: main oscillator (24MHz)
+
+  "#clock-cells":
+    const: 1
+    description:
+      See <dt-bindings/clock/thead,th1520-clk-ap.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/thead,th1520-clk-ap.h>
+    clock-controller@ef010000 {
+        compatible = "thead,th1520-clk-ap";
+        reg = <0xef010000 0x1000>;
+        clocks = <&osc>;
+        #clock-cells = <1>;
+    };
diff --git a/dts/upstream/Bindings/clock/ti,sci-clk.yaml b/dts/upstream/Bindings/clock/ti,sci-clk.yaml
index 0a9d6a4c4b6..66e8e66ca17 100644
--- a/dts/upstream/Bindings/clock/ti,sci-clk.yaml
+++ b/dts/upstream/Bindings/clock/ti,sci-clk.yaml
@@ -36,7 +36,7 @@ properties:
 
       The second cell should contain the clock ID.
 
-      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      Please see https://software-dl.ti.com/tisci/esd/latest/index.html for
       protocol documentation for the values to be used for different devices.
 
 additionalProperties: false
diff --git a/dts/upstream/Bindings/clock/ti-keystone-pllctrl.txt b/dts/upstream/Bindings/clock/ti-keystone-pllctrl.txt
deleted file mode 100644
index c35cb6c4af4..00000000000
--- a/dts/upstream/Bindings/clock/ti-keystone-pllctrl.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Device tree bindings for Texas Instruments keystone pll controller
-
-The main pll controller used to drive theC66x CorePacs, the switch fabric,
-and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
-the NETCP modules) requires a PLL Controller to manage the various clock
-divisions, gating, and synchronization.
-
-Required properties:
-
-- compatible:		"ti,keystone-pllctrl", "syscon"
-
-- reg:			contains offset/length value for pll controller
-			registers space.
-
-Example:
-
-pllctrl: pll-controller@02310000 {
-	compatible = "ti,keystone-pllctrl", "syscon";
-	reg = <0x02310000 0x200>;
-};
diff --git a/dts/upstream/Bindings/counter/ti-eqep.yaml b/dts/upstream/Bindings/counter/ti-eqep.yaml
index 85f1ff83afe..c882ab5fcf1 100644
--- a/dts/upstream/Bindings/counter/ti-eqep.yaml
+++ b/dts/upstream/Bindings/counter/ti-eqep.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: ti,am3352-eqep
+    enum:
+      - ti,am3352-eqep
+      - ti,am62-eqep
 
   reg:
     maxItems: 1
@@ -21,19 +23,35 @@ properties:
     maxItems: 1
 
   clocks:
-    description: The clock that determines the SYSCLKOUT rate for the eQEP
-      peripheral.
+    description: The functional and interface clock that determines the clock
+      rate for the eQEP peripheral.
     maxItems: 1
 
   clock-names:
     const: sysclkout
 
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,am62-eqep
+    then:
+      properties:
+        clock-names: false
+
+      required:
+        - power-domains
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
-  - clock-names
 
 additionalProperties: false
 
@@ -43,7 +61,6 @@ examples:
         compatible = "ti,am3352-eqep";
         reg = <0x180 0x80>;
         clocks = <&l4ls_gclk>;
-        clock-names = "sysclkout";
         interrupts = <79>;
     };
 
diff --git a/dts/upstream/Bindings/crypto/allwinner,sun8i-ce.yaml b/dts/upstream/Bindings/crypto/allwinner,sun8i-ce.yaml
index 4287678aa79..da47b601c16 100644
--- a/dts/upstream/Bindings/crypto/allwinner,sun8i-ce.yaml
+++ b/dts/upstream/Bindings/crypto/allwinner,sun8i-ce.yaml
@@ -18,6 +18,7 @@ properties:
       - allwinner,sun50i-a64-crypto
       - allwinner,sun50i-h5-crypto
       - allwinner,sun50i-h6-crypto
+      - allwinner,sun50i-h616-crypto
 
   reg:
     maxItems: 1
@@ -49,6 +50,7 @@ if:
     compatible:
       enum:
         - allwinner,sun20i-d1-crypto
+        - allwinner,sun50i-h616-crypto
 then:
   properties:
     clocks:
diff --git a/dts/upstream/Bindings/display/amlogic,meson-dw-hdmi.yaml b/dts/upstream/Bindings/display/amlogic,meson-dw-hdmi.yaml
index 0c85894648d..84d68b8cfcc 100644
--- a/dts/upstream/Bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/dts/upstream/Bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -71,6 +71,10 @@ properties:
       - const: iahb
       - const: venci
 
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
   resets:
     minItems: 3
 
@@ -129,6 +133,7 @@ examples:
         reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
         clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>;
         clock-names = "isfr", "iahb", "venci";
+        power-domains = <&pd_vpu>;
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/dts/upstream/Bindings/display/bridge/synopsys,dw-hdmi.yaml b/dts/upstream/Bindings/display/bridge/synopsys,dw-hdmi.yaml
index 4b7e54a8f03..33481381ccc 100644
--- a/dts/upstream/Bindings/display/bridge/synopsys,dw-hdmi.yaml
+++ b/dts/upstream/Bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -45,6 +45,19 @@ properties:
       - const: isfr
     additionalItems: true
 
+  ddc-i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+    description:
+      The HDMI DDC bus can be connected to either a system I2C master or the
+      functionally-reduced I2C master contained in the DWC HDMI. When connected
+      to a system I2C master this property contains a phandle to that I2C
+      master controller.
+
+      This property is deprecated, the system I2C master controller should
+      be referenced through the ddc-i2c-bus property of the HDMI connector
+      node.
+
   interrupts:
     maxItems: 1
 
diff --git a/dts/upstream/Bindings/display/bridge/toshiba,tc358767.yaml b/dts/upstream/Bindings/display/bridge/toshiba,tc358767.yaml
index ae894d996d2..2ad0cd6dd49 100644
--- a/dts/upstream/Bindings/display/bridge/toshiba,tc358767.yaml
+++ b/dts/upstream/Bindings/display/bridge/toshiba,tc358767.yaml
@@ -25,8 +25,8 @@ properties:
 
   reg:
     enum:
-      - 0x68
       - 0x0f
+      - 0x68
     description: |
         i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
 
diff --git a/dts/upstream/Bindings/display/imx/fsl,imx6-hdmi.yaml b/dts/upstream/Bindings/display/imx/fsl,imx6-hdmi.yaml
index 7979cf07f11..180c4b510fb 100644
--- a/dts/upstream/Bindings/display/imx/fsl,imx6-hdmi.yaml
+++ b/dts/upstream/Bindings/display/imx/fsl,imx6-hdmi.yaml
@@ -31,14 +31,6 @@ properties:
   clock-names:
     maxItems: 2
 
-  ddc-i2c-bus:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      The HDMI DDC bus can be connected to either a system I2C master or the
-      functionally-reduced I2C master contained in the DWC HDMI. When connected
-      to a system I2C master this property contains a phandle to that I2C
-      master controller.
-
   gpr:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
diff --git a/dts/upstream/Bindings/display/mediatek/mediatek,aal.yaml b/dts/upstream/Bindings/display/mediatek/mediatek,aal.yaml
index b4c28e96dd5..cf24434854f 100644
--- a/dts/upstream/Bindings/display/mediatek/mediatek,aal.yaml
+++ b/dts/upstream/Bindings/display/mediatek/mediatek,aal.yaml
@@ -36,6 +36,7 @@ properties:
               - mediatek,mt8188-disp-aal
               - mediatek,mt8192-disp-aal
               - mediatek,mt8195-disp-aal
+              - mediatek,mt8365-disp-aal
           - const: mediatek,mt8183-disp-aal
 
   reg:
diff --git a/dts/upstream/Bindings/display/mediatek/mediatek,ccorr.yaml b/dts/upstream/Bindings/display/mediatek/mediatek,ccorr.yaml
index 8c2a737237f..9f836676383 100644
--- a/dts/upstream/Bindings/display/mediatek/mediatek,ccorr.yaml
+++ b/dts/upstream/Bindings/display/mediatek/mediatek,ccorr.yaml
@@ -25,6 +25,9 @@ properties:
           - mediatek,mt8183-disp-ccorr
           - mediatek,mt8192-disp-ccorr
       - items:
+          - const: mediatek,mt8365-disp-ccorr
+          - const: mediatek,mt8183-disp-ccorr
+      - items:
           - enum:
               - mediatek,mt8186-disp-ccorr
               - mediatek,mt8188-disp-ccorr
diff --git a/dts/upstream/Bindings/display/mediatek/mediatek,color.yaml b/dts/upstream/Bindings/display/mediatek/mediatek,color.yaml
index b886ca0d89e..7df786bbad2 100644
--- a/dts/upstream/Bindings/display/mediatek/mediatek,color.yaml
+++ b/dts/upstream/Bindings/display/mediatek/mediatek,color.yaml
@@ -40,6 +40,7 @@ properties:
               - mediatek,mt8188-disp-color
               - mediatek,mt8192-disp-color
               - mediatek,mt8195-disp-color
+              - mediatek,mt8365-disp-color
           - const: mediatek,mt8173-disp-color
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/display/mediatek/mediatek,dither.yaml b/dts/upstream/Bindings/display/mediatek/mediatek,dither.yaml
index 1588b3f7cec..6fceb1f95d2 100644
--- a/dts/upstream/Bindings/display/mediatek/mediatek,dither.yaml
+++ b/dts/upstream/Bindings/display/mediatek/mediatek,dither.yaml
@@ -30,6 +30,7 @@ properties:
               - mediatek,mt8188-disp-dither
               - mediatek,mt8192-disp-dither
               - mediatek,mt8195-disp-dither
+              - mediatek,mt8365-disp-dither
           - const: mediatek,mt8183-disp-dither
 
   reg:
diff --git a/dts/upstream/Bindings/display/mediatek/mediatek,dpi.yaml b/dts/upstream/Bindings/display/mediatek/mediatek,dpi.yaml
index 803c00f2620..5ca7679d542 100644
--- a/dts/upstream/Bindings/display/mediatek/mediatek,dpi.yaml
+++ b/dts/upstream/Bindings/display/mediatek/mediatek,dpi.yaml
@@ -31,6 +31,10 @@ properties:
           - enum:
               - mediatek,mt6795-dpi
           - const: mediatek,mt8183-dpi
+      - items:
+          - enum:
+              - mediatek,mt8365-dpi
+          - const: mediatek,mt8192-dpi
 
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/display/mediatek/mediatek,dsi.yaml b/dts/upstream/Bindings/display/mediatek/mediatek,dsi.yaml
index 8611319bed2..a7aa8fcb0dd 100644
--- a/dts/upstream/Bindings/display/mediatek/mediatek,dsi.yaml
+++ b/dts/upstream/Bindings/display/mediatek/mediatek,dsi.yaml
@@ -37,6 +37,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8195-dsi
+              - mediatek,mt8365-dsi
           - const: mediatek,mt8183-dsi
 
   reg:
diff --git a/dts/upstream/Bindings/display/mediatek/mediatek,gamma.yaml b/dts/upstream/Bindings/display/mediatek/mediatek,gamma.yaml
index b8b8e83ebc3..6823d3ce504 100644
--- a/dts/upstream/Bindings/display/mediatek/mediatek,gamma.yaml
+++ b/dts/upstream/Bindings/display/mediatek/mediatek,gamma.yaml
@@ -35,6 +35,7 @@ properties:
               - mediatek,mt8188-disp-gamma
               - mediatek,mt8192-disp-gamma
               - mediatek,mt8195-disp-gamma
+              - mediatek,mt8365-disp-gamma
           - const: mediatek,mt8183-disp-gamma
       - items:
           - enum:
diff --git a/dts/upstream/Bindings/display/mediatek/mediatek,ovl.yaml b/dts/upstream/Bindings/display/mediatek/mediatek,ovl.yaml
index c471a181d12..d55611c7ce5 100644
--- a/dts/upstream/Bindings/display/mediatek/mediatek,ovl.yaml
+++ b/dts/upstream/Bindings/display/mediatek/mediatek,ovl.yaml
@@ -44,6 +44,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8186-disp-ovl
+              - mediatek,mt8365-disp-ovl
           - const: mediatek,mt8192-disp-ovl
 
   reg:
diff --git a/dts/upstream/Bindings/display/mediatek/mediatek,rdma.yaml b/dts/upstream/Bindings/display/mediatek/mediatek,rdma.yaml
index 39dbb5c8bcf..4cadb245d02 100644
--- a/dts/upstream/Bindings/display/mediatek/mediatek,rdma.yaml
+++ b/dts/upstream/Bindings/display/mediatek/mediatek,rdma.yaml
@@ -45,6 +45,7 @@ properties:
           - enum:
               - mediatek,mt8186-disp-rdma
               - mediatek,mt8192-disp-rdma
+              - mediatek,mt8365-disp-rdma
           - const: mediatek,mt8183-disp-rdma
 
   reg:
diff --git a/dts/upstream/Bindings/display/msm/dsi-controller-main.yaml b/dts/upstream/Bindings/display/msm/dsi-controller-main.yaml
index 1fa28e97655..b0fd96b76ed 100644
--- a/dts/upstream/Bindings/display/msm/dsi-controller-main.yaml
+++ b/dts/upstream/Bindings/display/msm/dsi-controller-main.yaml
@@ -32,6 +32,7 @@ properties:
               - qcom,sm6125-dsi-ctrl
               - qcom,sm6350-dsi-ctrl
               - qcom,sm6375-dsi-ctrl
+              - qcom,sm7150-dsi-ctrl
               - qcom,sm8150-dsi-ctrl
               - qcom,sm8250-dsi-ctrl
               - qcom,sm8350-dsi-ctrl
@@ -162,6 +163,22 @@ properties:
                 items:
                   enum: [ 0, 1, 2, 3 ]
 
+              qcom,te-source:
+                $ref: /schemas/types.yaml#/definitions/string
+                description:
+                  Specifies the source of vsync signal from the panel used for
+                  tearing elimination.
+                default: mdp_vsync_p
+                enum:
+                  - mdp_vsync_p
+                  - mdp_vsync_s
+                  - mdp_vsync_e
+                  - timer0
+                  - timer1
+                  - timer2
+                  - timer3
+                  - timer4
+
     required:
       - port@0
       - port@1
@@ -332,6 +349,7 @@ allOf:
             enum:
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
+              - qcom,sm7150-dsi-ctrl
               - qcom,sm8150-dsi-ctrl
               - qcom,sm8250-dsi-ctrl
               - qcom,sm8350-dsi-ctrl
@@ -452,6 +470,7 @@ examples:
                           dsi0_out: endpoint {
                                    remote-endpoint = <&sn65dsi86_in>;
                                    data-lanes = <0 1 2 3>;
+                                   qcom,te-source = "mdp_vsync_e";
                           };
                   };
            };
diff --git a/dts/upstream/Bindings/display/msm/dsi-phy-28nm.yaml b/dts/upstream/Bindings/display/msm/dsi-phy-28nm.yaml
index 288d8babb76..a55c2445d18 100644
--- a/dts/upstream/Bindings/display/msm/dsi-phy-28nm.yaml
+++ b/dts/upstream/Bindings/display/msm/dsi-phy-28nm.yaml
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - qcom,dsi-phy-28nm-8226
+      - qcom,dsi-phy-28nm-8937
       - qcom,dsi-phy-28nm-8960
       - qcom,dsi-phy-28nm-hpm
       - qcom,dsi-phy-28nm-hpm-fam-b
diff --git a/dts/upstream/Bindings/display/msm/gmu.yaml b/dts/upstream/Bindings/display/msm/gmu.yaml
index b3837368a26..b1bd372996d 100644
--- a/dts/upstream/Bindings/display/msm/gmu.yaml
+++ b/dts/upstream/Bindings/display/msm/gmu.yaml
@@ -23,6 +23,9 @@ properties:
       - items:
           - pattern: '^qcom,adreno-gmu-[67][0-9][0-9]\.[0-9]$'
           - const: qcom,adreno-gmu
+      - items:
+          - pattern: '^qcom,adreno-gmu-x[1-9][0-9][0-9]\.[0-9]$'
+          - const: qcom,adreno-gmu
       - const: qcom,adreno-gmu-wrapper
 
   reg:
@@ -225,6 +228,7 @@ allOf:
               - qcom,adreno-gmu-730.1
               - qcom,adreno-gmu-740.1
               - qcom,adreno-gmu-750.1
+              - qcom,adreno-gmu-x185.1
     then:
       properties:
         reg:
diff --git a/dts/upstream/Bindings/display/msm/gpu.yaml b/dts/upstream/Bindings/display/msm/gpu.yaml
index 40b5c6bd11f..6ddc72fd85b 100644
--- a/dts/upstream/Bindings/display/msm/gpu.yaml
+++ b/dts/upstream/Bindings/display/msm/gpu.yaml
@@ -10,6 +10,18 @@ title: Adreno or Snapdragon GPUs
 maintainers:
   - Rob Clark <robdclark@gmail.com>
 
+# dtschema does not select nodes based on pattern+const, so add custom select
+# as a work-around:
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,adreno
+          - amd,imageon
+  required:
+    - compatible
+
 properties:
   compatible:
     oneOf:
@@ -17,7 +29,7 @@ properties:
           The driver is parsing the compat string for Adreno to
           figure out the chip-id.
         items:
-          - pattern: '^qcom,adreno-[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]$'
+          - pattern: '^qcom,adreno-[0-9a-f]{8}$'
           - const: qcom,adreno
       - description: |
           The driver is parsing the compat string for Adreno to
@@ -32,9 +44,13 @@ properties:
           - pattern: '^amd,imageon-200\.[0-1]$'
           - const: amd,imageon
 
-  clocks: true
+  clocks:
+    minItems: 2
+    maxItems: 7
 
-  clock-names: true
+  clock-names:
+    minItems: 2
+    maxItems: 7
 
   reg:
     minItems: 1
@@ -42,7 +58,10 @@ properties:
 
   reg-names:
     minItems: 1
-    maxItems: 3
+    items:
+      - const: kgsl_3d0_reg_memory
+      - const: cx_mem
+      - const: cx_dbgc
 
   interrupts:
     maxItems: 1
diff --git a/dts/upstream/Bindings/display/msm/qcom,mdp5.yaml b/dts/upstream/Bindings/display/msm/qcom,mdp5.yaml
index 91c774f106c..e153f8d26e7 100644
--- a/dts/upstream/Bindings/display/msm/qcom,mdp5.yaml
+++ b/dts/upstream/Bindings/display/msm/qcom,mdp5.yaml
@@ -25,6 +25,7 @@ properties:
               - qcom,msm8226-mdp5
               - qcom,msm8916-mdp5
               - qcom,msm8917-mdp5
+              - qcom,msm8937-mdp5
               - qcom,msm8953-mdp5
               - qcom,msm8974-mdp5
               - qcom,msm8976-mdp5
diff --git a/dts/upstream/Bindings/display/msm/qcom,mdss.yaml b/dts/upstream/Bindings/display/msm/qcom,mdss.yaml
index e4576546bf0..7c6462caa44 100644
--- a/dts/upstream/Bindings/display/msm/qcom,mdss.yaml
+++ b/dts/upstream/Bindings/display/msm/qcom,mdss.yaml
@@ -126,6 +126,7 @@ patternProperties:
           - qcom,dsi-phy-14nm-8953
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
+          - qcom,dsi-phy-28nm-8937
           - qcom,dsi-phy-28nm-hpm
           - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
diff --git a/dts/upstream/Bindings/display/msm/qcom,sm6375-mdss.yaml b/dts/upstream/Bindings/display/msm/qcom,sm6375-mdss.yaml
index 8e8a288d318..e22b4c433fd 100644
--- a/dts/upstream/Bindings/display/msm/qcom,sm6375-mdss.yaml
+++ b/dts/upstream/Bindings/display/msm/qcom,sm6375-mdss.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm SM6375 Display MDSS
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description:
   SM6375 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
diff --git a/dts/upstream/Bindings/display/msm/qcom,sm7150-dpu.yaml b/dts/upstream/Bindings/display/msm/qcom,sm7150-dpu.yaml
new file mode 100644
index 00000000000..c79b2d44280
--- /dev/null
+++ b/dts/upstream/Bindings/display/msm/qcom,sm7150-dpu.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM7150 Display Processing Unit (DPU)
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm7150-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display ahb clock
+      - description: Display rotator clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: rot
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm7150-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc_disp_hf_axi_clk>,
+                 <&dispcc_mdss_ahb_clk>,
+                 <&dispcc_mdss_rot_clk>,
+                 <&dispcc_mdss_mdp_lut_clk>,
+                 <&dispcc_mdss_mdp_clk>,
+                 <&dispcc_mdss_vsync_clk>;
+        clock-names = "bus",
+                      "iface",
+                      "rot",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc_mdss_vsync_clk>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_CX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&mdss_dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&mdss_dsi1_in>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                dpu_intf0_out: endpoint {
+                    remote-endpoint = <&dp_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-19200000 {
+                opp-hz = /bits/ 64 <19200000>;
+                required-opps = <&rpmhpd_opp_min_svs>;
+            };
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-300000000 {
+                opp-hz = /bits/ 64 <300000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-344000000 {
+                opp-hz = /bits/ 64 <344000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-430000000 {
+                opp-hz = /bits/ 64 <430000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/display/msm/qcom,sm7150-mdss.yaml b/dts/upstream/Bindings/display/msm/qcom,sm7150-mdss.yaml
new file mode 100644
index 00000000000..13c5d5ffabd
--- /dev/null
+++ b/dts/upstream/Bindings/display/msm/qcom,sm7150-mdss.yaml
@@ -0,0 +1,458 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM7150 Display MDSS
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+description:
+  SM7150 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm7150-mdss
+
+  clocks:
+    items:
+      - description: Display ahb clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from mdp1 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm7150-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm7150-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm7150-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,sm7150-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm7150-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc_mdss_gdsc>;
+
+        clocks = <&dispcc_mdss_ahb_clk>,
+                 <&gcc_disp_hf_axi_clk>,
+                 <&gcc_disp_sf_axi_clk>,
+                 <&dispcc_mdss_mdp_clk>;
+        clock-names = "iface",
+                      "bus",
+                      "nrt_bus",
+                      "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS
+                         &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+                        <&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS
+                         &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+                        <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+                         &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
+
+        iommus = <&apps_smmu 0x800 0x440>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm7150-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_disp_hf_axi_clk>,
+                     <&dispcc_mdss_ahb_clk>,
+                     <&dispcc_mdss_rot_clk>,
+                     <&dispcc_mdss_mdp_lut_clk>,
+                     <&dispcc_mdss_mdp_clk>,
+                     <&dispcc_mdss_vsync_clk>;
+            clock-names = "bus",
+                          "iface",
+                          "rot",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdss_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_CX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss_dsi1_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-19200000 {
+                    opp-hz = /bits/ 64 <19200000>;
+                    required-opps = <&rpmhpd_opp_min_svs>;
+                };
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-344000000 {
+                    opp-hz = /bits/ 64 <344000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-430000000 {
+                    opp-hz = /bits/ 64 <430000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm7150-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc_mdss_byte0_clk>,
+                     <&dispcc_mdss_byte0_intf_clk>,
+                     <&dispcc_mdss_pclk0_clk>,
+                     <&dispcc_mdss_esc0_clk>,
+                     <&dispcc_mdss_ahb_clk>,
+                     <&gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_mdss_byte0_clk_src>,
+                              <&dispcc_mdss_pclk0_clk_src>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>,
+                                     <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_CX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-180000000 {
+                    opp-hz = /bits/ 64 <180000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-275000000 {
+                    opp-hz = /bits/ 64 <275000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vdda_mipi_dsi0_pll>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm7150-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc_mdss_byte1_clk>,
+                     <&dispcc_mdss_byte1_intf_clk>,
+                     <&dispcc_mdss_pclk1_clk>,
+                     <&dispcc_mdss_esc1_clk>,
+                     <&dispcc_mdss_ahb_clk>,
+                     <&gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_mdss_byte1_clk_src>,
+                              <&dispcc_mdss_pclk1_clk_src>;
+            assigned-clock-parents = <&mdss_dsi1_phy 0>,
+                                     <&mdss_dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_CX>;
+
+            phys = <&mdss_dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vdda_mipi_dsi1_pll>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sm7150-dp";
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&dispcc_mdss_dp_aux_clk>,
+                     <&dispcc_mdss_dp_link_clk>,
+                     <&dispcc_mdss_dp_link_intf_clk>,
+                     <&dispcc_mdss_dp_pixel_clk>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+
+            assigned-clocks = <&dispcc_mdss_dp_link_clk_src>,
+                              <&dispcc_mdss_dp_pixel_clk_src>;
+            assigned-clock-parents = <&dp_phy 0>,
+                                     <&dp_phy 1>;
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_CX>;
+
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint {
+                    };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/display/panel/anbernic,rg35xx-plus-panel.yaml b/dts/upstream/Bindings/display/panel/anbernic,rg35xx-plus-panel.yaml
new file mode 100644
index 00000000000..1d67492ebd3
--- /dev/null
+++ b/dts/upstream/Bindings/display/panel/anbernic,rg35xx-plus-panel.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/anbernic,rg35xx-plus-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Anbernic RG35XX series (WL-355608-A8) 3.5" 640x480 24-bit IPS LCD panel
+
+maintainers:
+  - Ryan Walklin <ryan@testtoast.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: anbernic,rg35xx-plus-panel
+      - items:
+          - enum:
+              - anbernic,rg35xx-2024-panel
+              - anbernic,rg35xx-h-panel
+              - anbernic,rg35xx-sp-panel
+          - const: anbernic,rg35xx-plus-panel
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "anbernic,rg35xx-plus-panel";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14
+
+            backlight = <&backlight>;
+            power-supply = <&reg_lcd>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&tcon_lcd0_out_lcd>;
+                };
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/dts/upstream/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
index 2399cabf044..dd614e077bb 100644
--- a/dts/upstream/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
+++ b/dts/upstream/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ASUS Z00T TM5P5 NT35596 5.5" 1080×1920 LCD Panel
 
 maintainers:
-  - Konrad Dybcio <konradybcio@gmail.com>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |+
   This panel seems to only be found in the Asus Z00T
diff --git a/dts/upstream/Bindings/display/panel/boe,tv101wum-nl6.yaml b/dts/upstream/Bindings/display/panel/boe,tv101wum-nl6.yaml
index 9e603cad134..7a9f49e40e7 100644
--- a/dts/upstream/Bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/dts/upstream/Bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -32,8 +32,6 @@ properties:
       - innolux,hj110iz-01a
         # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel
       - starry,2081101qfh032011-53g
-        # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
-      - starry,himax83102-j02
         # STARRY ili9882t 10.51" WUXGA TFT LCD panel
       - starry,ili9882t
 
diff --git a/dts/upstream/Bindings/display/panel/himax,hx83102.yaml b/dts/upstream/Bindings/display/panel/himax,hx83102.yaml
new file mode 100644
index 00000000000..c649fb08583
--- /dev/null
+++ b/dts/upstream/Bindings/display/panel/himax,hx83102.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83102 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Cong Yang <yangcong5@huaqin.corp-partner.google.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # Boe nv110wum-l60 11.0" WUXGA TFT LCD panel
+          - boe,nv110wum-l60
+          # IVO t109nw41 11.0" WUXGA TFT LCD panel
+          - ivo,t109nw41
+          # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
+          - starry,himax83102-j02
+      - const: himax,hx83102
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - pp1800-supply
+  - avdd-supply
+  - avee-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "starry,himax83102-j02", "himax,hx83102";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/upstream/Bindings/display/panel/ilitek,ili9806e.yaml b/dts/upstream/Bindings/display/panel/ilitek,ili9806e.yaml
new file mode 100644
index 00000000000..cfd7cc9c872
--- /dev/null
+++ b/dts/upstream/Bindings/display/panel/ilitek,ili9806e.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9806E based MIPI-DSI panels
+
+maintainers:
+  - Michael Walle <mwalle@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ortustech,com35h3p70ulc
+      - const: ilitek,ili9806e
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vccio-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vccio-supply
+  - reset-gpios
+  - backlight
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "ortustech,com35h3p70ulc", "ilitek,ili9806e";
+            reg = <0>;
+            vdd-supply = <&reg_vdd_panel>;
+            vccio-supply = <&reg_vccio_panel>;
+            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/upstream/Bindings/display/panel/jadard,jd9365da-h3.yaml b/dts/upstream/Bindings/display/panel/jadard,jd9365da-h3.yaml
index 20afdb4568a..3d5bede98cf 100644
--- a/dts/upstream/Bindings/display/panel/jadard,jd9365da-h3.yaml
+++ b/dts/upstream/Bindings/display/panel/jadard,jd9365da-h3.yaml
@@ -17,6 +17,7 @@ properties:
     items:
       - enum:
           - chongzhou,cz101b4001
+          - kingdisplay,kd101ne3-40ti
           - radxa,display-10hd-ad001
           - radxa,display-8hd-ad002
       - const: jadard,jd9365da-h3
diff --git a/dts/upstream/Bindings/display/panel/lg,sw43408.yaml b/dts/upstream/Bindings/display/panel/lg,sw43408.yaml
index 1e08648f5bc..bbaaa783d18 100644
--- a/dts/upstream/Bindings/display/panel/lg,sw43408.yaml
+++ b/dts/upstream/Bindings/display/panel/lg,sw43408.yaml
@@ -21,7 +21,9 @@ properties:
     items:
       - const: lg,sw43408
 
-  reg: true
+  reg:
+    maxItems: 1
+
   port: true
   vddi-supply: true
   vpnl-supply: true
diff --git a/dts/upstream/Bindings/display/panel/panel-edp-legacy.yaml b/dts/upstream/Bindings/display/panel/panel-edp-legacy.yaml
new file mode 100644
index 00000000000..b308047c1ed
--- /dev/null
+++ b/dts/upstream/Bindings/display/panel/panel-edp-legacy.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp-legacy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Legacy eDP panels from before the "edp-panel" compatible
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description: |
+  This binding file is a collection of eDP panels from before the generic
+  "edp-panel" compatible was introduced. It is kept around to support old
+  dts files. The only reason one might add a new panel here instead of using
+  the generic "edp-panel" is if it needed to be used on an eDP controller
+  that doesn't support the generic "edp-panel" compatible, but it should be
+  a strong preference to add the generic "edp-panel" compatible instead.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+    # compatible must be listed in alphabetical order, ordered by compatible.
+    # The description in the comment is mandatory for each compatible.
+
+        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+      - auo,b101ean01
+        # AUO B116XAK01 eDP TFT LCD panel
+      - auo,b116xa01
+        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+      - auo,b133htn01
+        # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+      - auo,b133xtn01
+        # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+      - boe,nv101wxmn51
+        # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv110wtm-n61
+        # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
+      - boe,nv133fhm-n61
+        # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv133fhm-n62
+        # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
+      - boe,nv140fhmn49
+        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+      - innolux,n116bca-ea1
+        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+      - innolux,n116bge
+        # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
+      - innolux,n125hce-gn1
+        # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+      - innolux,p120zdg-bf1
+        # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
+      - kingdisplay,kd116n21-30nv-a010
+        # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
+      - lg,lp079qx1-sp0v
+        # LG 9.7" (2048x1536 pixels) TFT LCD panel
+      - lg,lp097qx1-spa1
+        # LG 12.0" (1920x1280 pixels) TFT LCD panel
+      - lg,lp120up1
+        # LG 12.9" (2560x1700 pixels) TFT LCD panel
+      - lg,lp129qe
+        # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
+      - neweast,wjfh116008a
+        # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
+      - samsung,lsn122dl01-c01
+        # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
+      - samsung,ltn140at29-301
+        # Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
+      - sharp,ld-d5116z01b
+        # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
+      - sharp,lq123p1jx31
+
+  backlight: true
+  ddc-i2c-bus: true
+  enable-gpios: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    panel: panel {
+      compatible = "innolux,n116bge";
+      power-supply = <&panel_regulator>;
+      backlight = <&backlight>;
+
+      panel-timing {
+        clock-frequency = <74250000>;
+        hactive = <1366>;
+        hfront-porch = <136>;
+        hback-porch = <60>;
+        hsync-len = <30>;
+        hsync-active = <0>;
+        vactive = <768>;
+        vfront-porch = <8>;
+        vback-porch = <12>;
+        vsync-len = <12>;
+        vsync-active = <0>;
+      };
+
+      port {
+        panel_in_edp: endpoint {
+          remote-endpoint = <&edp_out_panel>;
+        };
+      };
+    };
diff --git a/dts/upstream/Bindings/display/panel/panel-mipi-dbi-spi.yaml b/dts/upstream/Bindings/display/panel/panel-mipi-dbi-spi.yaml
index d0ac31ab60c..6f0290c4e29 100644
--- a/dts/upstream/Bindings/display/panel/panel-mipi-dbi-spi.yaml
+++ b/dts/upstream/Bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -50,6 +50,12 @@ description: |
       |        Command or data         |
       |<D7><D6><D5><D4><D3><D2><D1><D0>|
 
+  The standard defines one pixel format for type C: RGB111. The industry
+  however has decided to provide the type A/B interface pixel formats also on
+  the Type C interface and most common among these are RGB565 and RGB666.
+  The MIPI DCS command set_address_mode (36h) has one bit that controls RGB/BGR
+  order. This gives each supported RGB format a BGR variant.
+
   The panel resolution is specified using the panel-timing node properties
   hactive (width) and vactive (height). The other mandatory panel-timing
   properties should be set to zero except clock-frequency which can be
@@ -93,6 +99,28 @@ properties:
 
   spi-3wire: true
 
+  format:
+    description: >
+      Pixel format in bit order as going on the wire:
+        * `x2r1g1b1r1g1b1` - RGB111, 2 pixels per byte
+        * `x2b1g1r1b1g1r1` - BGR111, 2 pixels per byte
+        * `x1r1g1b1x1r1g1b1` - RGB111, 2 pixels per byte
+        * `x1b1g1r1x1b1g1r1` - BGR111, 2 pixels per byte
+        * `r5g6b5` - RGB565, 2 bytes
+        * `b5g6r5` - BGR565, 2 bytes
+        * `r6x2g6x2b6x2` - RGB666, 3 bytes
+        * `b6x2g6x2r6x2` - BGR666, 3 bytes
+    enum:
+      - x2r1g1b1r1g1b1
+      - x2b1g1r1b1g1r1
+      - x1r1g1b1x1r1g1b1
+      - x1b1g1r1x1b1g1r1
+      - r5g6b5
+      - b5g6r5
+      - r6x2g6x2b6x2
+      - b6x2g6x2r6x2
+    default: r5g6b5
+
 required:
   - compatible
   - reg
@@ -119,6 +147,8 @@ examples:
             reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
             write-only;
 
+            format = "r5g6b5";
+
             backlight = <&backlight>;
 
             width-mm = <35>;
diff --git a/dts/upstream/Bindings/display/panel/panel-simple-dsi.yaml b/dts/upstream/Bindings/display/panel/panel-simple-dsi.yaml
index db5acd2807e..9b92a05791c 100644
--- a/dts/upstream/Bindings/display/panel/panel-simple-dsi.yaml
+++ b/dts/upstream/Bindings/display/panel/panel-simple-dsi.yaml
@@ -46,6 +46,8 @@ properties:
       - lg,ld070wx3-sl01
         # LG Corporation 5" HD TFT LCD panel
       - lg,lh500wx1-sd03
+        # Lincoln LCD197 5" 1080x1920 LCD panel
+      - lincolntech,lcd197
         # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
       - osddisplays,osd101t2587-53ts
         # Panasonic 10" WUXGA TFT LCD panel
diff --git a/dts/upstream/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/dts/upstream/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
index 716ece5f397..e78160d1aa2 100644
--- a/dts/upstream/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
+++ b/dts/upstream/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
@@ -41,6 +41,12 @@ properties:
       - auo,g190ean01
         # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel
       - koe,tx26d202vm0bwa
+        # Lincoln Technology Solutions, LCD185-101CT 10.1" TFT 1920x1200
+      - lincolntech,lcd185-101ct
+        # Microtips Technology MF-101HIEBCAF0 10.1" WUXGA (1920x1200) TFT LCD panel
+      - microtips,mf-101hiebcaf0
+        # Microtips Technology MF-103HIEB0GA0 10.25" 1920x720 TFT LCD panel
+      - microtips,mf-103hieb0ga0
         # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
       - nlt,nl192108ac18-02d
 
diff --git a/dts/upstream/Bindings/display/panel/panel-simple.yaml b/dts/upstream/Bindings/display/panel/panel-simple.yaml
index 5067f5c0a27..8a87e0100dc 100644
--- a/dts/upstream/Bindings/display/panel/panel-simple.yaml
+++ b/dts/upstream/Bindings/display/panel/panel-simple.yaml
@@ -41,28 +41,18 @@ properties:
       - ampire,am800600p5tmqw-tb8h
         # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
       - auo,b101aw03
-        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
-      - auo,b101ean01
         # AU Optronics Corporation 10.1" WXGA TFT LCD panel
       - auo,b101xtn01
-        # AUO B116XAK01 eDP TFT LCD panel
-      - auo,b116xa01
         # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
       - auo,b116xw03
-        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
-      - auo,b133han05
-        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
-      - auo,b133htn01
-        # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
-      - auo,b133xtn01
-        # AU Optronics Corporation 14.0" FHD (1920x1080) color TFT-LCD panel
-      - auo,b140han06
         # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
       - auo,g070vvn01
         # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
       - auo,g101evn010
         # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
       - auo,g104sn02
+        # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+      - auo,g104stn01
         # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel
       - auo,g121ean01
         # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel
@@ -81,16 +71,6 @@ properties:
       - boe,ev121wxm-n10-1850
         # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
       - boe,hv070wsa-100
-        # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
-      - boe,nv101wxmn51
-        # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
-      - boe,nv110wtm-n61
-        # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
-      - boe,nv133fhm-n61
-        # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
-      - boe,nv133fhm-n62
-        # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
-      - boe,nv140fhmn49
         # Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel
       - cct,cmt430b19n00
         # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
@@ -172,8 +152,6 @@ properties:
       - hannstar,hsd100pxn1
         # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
       - hit,tx23d38vm0caa
-        # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel
-      - ivo,m133nwf4-r0
         # Innolux AT043TN24 4.3" WQVGA TFT LCD panel
       - innolux,at043tn24
         # Innolux AT070TN92 7.0" WQVGA TFT LCD panel
@@ -192,22 +170,12 @@ properties:
       - innolux,g121x1-l03
         # Innolux Corporation 12.1" G121XCE-L01 XGA (1024x768) TFT LCD panel
       - innolux,g121xce-l01
-        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
-      - innolux,n116bca-ea1
-        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
-      - innolux,n116bge
-        # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
-      - innolux,n125hce-gn1
         # InnoLux 15.6" FHD (1920x1080) TFT LCD panel
       - innolux,g156hce-l01
         # InnoLux 15.6" WXGA TFT LCD panel
       - innolux,n156bge-l21
-        # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
-      - innolux,p120zdg-bf1
         # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
       - innolux,zj070na-01p
-        # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
-      - kingdisplay,kd116n21-30nv-a010
         # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
       - koe,tx14d24vm1bpa
         # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
@@ -220,14 +188,6 @@ properties:
       - lemaker,bl035-rgb-002
         # LG 7" (800x480 pixels) TFT LCD panel
       - lg,lb070wv8
-        # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
-      - lg,lp079qx1-sp0v
-        # LG 9.7" (2048x1536 pixels) TFT LCD panel
-      - lg,lp097qx1-spa1
-        # LG 12.0" (1920x1280 pixels) TFT LCD panel
-      - lg,lp120up1
-        # LG 12.9" (2560x1700 pixels) TFT LCD panel
-      - lg,lp129qe
         # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module
       - logictechno,lt161010-2nhc
         # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module
@@ -254,8 +214,6 @@ properties:
       - nec,nl4827hc19-05b
         # Netron-DY E231732 7.0" WSVGA TFT LCD panel
       - netron-dy,e231732
-        # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
-      - neweast,wjfh116008a
         # Newhaven Display International 480 x 272 TFT LCD panel
       - newhaven,nhd-4.3-480272ef-atxl
         # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
@@ -280,6 +238,8 @@ properties:
       - powertip,ph128800t006-zhc01
         # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
       - powertip,ph800480t013-idf02
+        # PrimeView PM070WL4 7.0" 800x480 TFT LCD panel
+      - primeview,pm070wl4
         # QiaoDian XianShi Corporation 4"3 TFT LCD panel
       - qiaodian,qd43003c0-40
         # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel
@@ -290,16 +250,10 @@ properties:
       - rocktech,rk070er9427
         # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel
       - rocktech,rk043fn48h
-        # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
-      - samsung,atna33xc20
-        # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
-      - samsung,lsn122dl01-c01
         # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel
       - samsung,ltl101al01
         # Samsung Electronics 10.1" WSVGA TFT LCD panel
       - samsung,ltn101nt05
-        # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
-      - samsung,ltn140at29-301
         # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
       - satoz,sat050at40h12r2
         # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
@@ -308,18 +262,12 @@ properties:
       - sharp,lq070y3dg3b
         # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
       - sharp,lq101k1ly04
-        # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
-      - sharp,lq123p1jx31
-        # Sharp 14" (1920x1080 pixels) TFT LCD panel
-      - sharp,lq140m1jw46
         # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
       - sharp,ls020b1dd01d
         # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
       - shelly,sca07010-bfn-lnn
         # Starry KR070PE2T 7" WVGA TFT LCD panel
       - starry,kr070pe2t
-        # Starry 12.2" (1920x1200 pixels) TFT LCD panel
-      - starry,kr122ea0sra
         # Startek KD070WVFPA043-C069A 7" TFT LCD panel
       - startek,kd070wvfpa
         # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
diff --git a/dts/upstream/Bindings/display/panel/raydium,rm69380.yaml b/dts/upstream/Bindings/display/panel/raydium,rm69380.yaml
index b17765b2b35..ec445ff5631 100644
--- a/dts/upstream/Bindings/display/panel/raydium,rm69380.yaml
+++ b/dts/upstream/Bindings/display/panel/raydium,rm69380.yaml
@@ -28,6 +28,9 @@ properties:
       to work with the indicated panel. The raydium,rm69380 compatible shall
       always be provided as a fallback.
 
+  reg:
+    maxItems: 1
+
   avdd-supply:
     description: Analog voltage rail
 
@@ -38,8 +41,6 @@ properties:
     maxItems: 1
     description: phandle of gpio for reset line - This should be active low
 
-  reg: true
-
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/display/panel/samsung,atna33xc20.yaml b/dts/upstream/Bindings/display/panel/samsung,atna33xc20.yaml
new file mode 100644
index 00000000000..032f783eefc
--- /dev/null
+++ b/dts/upstream/Bindings/display/panel/samsung,atna33xc20.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,atna33xc20.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
+      - const: samsung,atna33xc20
+      - items:
+          - enum:
+              # Samsung 14.5" WQXGA+ (2880x1800 pixels) eDP AMOLED panel
+              - samsung,atna45af01
+              # Samsung 14.5" 3K (2944x1840 pixels) eDP AMOLED panel
+              - samsung,atna45dc02
+          - const: samsung,atna33xc20
+
+  enable-gpios: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - enable-gpios
+  - power-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "samsung,atna33xc20";
+            enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+            power-supply = <&pp3300_dx_edp>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };
diff --git a/dts/upstream/Bindings/display/panel/sharp,ld-d5116z01b.yaml b/dts/upstream/Bindings/display/panel/sharp,ld-d5116z01b.yaml
deleted file mode 100644
index fbb647eb33c..00000000000
--- a/dts/upstream/Bindings/display/panel/sharp,ld-d5116z01b.yaml
+++ /dev/null
@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/panel/sharp,ld-d5116z01b.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
-
-maintainers:
-  - Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
-
-allOf:
-  - $ref: panel-common.yaml#
-
-properties:
-  compatible:
-    const: sharp,ld-d5116z01b
-
-  power-supply: true
-  backlight: true
-  port: true
-  no-hpd: true
-
-additionalProperties: false
-
-required:
-  - compatible
-  - power-supply
-
-...
diff --git a/dts/upstream/Bindings/display/panel/sony,td4353-jdi.yaml b/dts/upstream/Bindings/display/panel/sony,td4353-jdi.yaml
index 191b692125e..032a989184f 100644
--- a/dts/upstream/Bindings/display/panel/sony,td4353-jdi.yaml
+++ b/dts/upstream/Bindings/display/panel/sony,td4353-jdi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Sony TD4353 JDI 5 / 5.7" 2160x1080 MIPI-DSI Panel
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   The Sony TD4353 JDI is a 5 (XZ2c) / 5.7 (XZ2) inch 2160x1080
diff --git a/dts/upstream/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/dts/upstream/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 2aac62219ff..9d096856a79 100644
--- a/dts/upstream/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/dts/upstream/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -70,14 +70,6 @@ properties:
           - vpll
           - ref
 
-  ddc-i2c-bus:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      The HDMI DDC bus can be connected to either a system I2C master or the
-      functionally-reduced I2C master contained in the DWC HDMI. When connected
-      to a system I2C master this property contains a phandle to that I2C
-      master controller.
-
   phys:
     maxItems: 1
     description: The HDMI PHY
diff --git a/dts/upstream/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/dts/upstream/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
index ccf79e738fa..ccd71c5324a 100644
--- a/dts/upstream/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
+++ b/dts/upstream/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
@@ -15,6 +15,7 @@ properties:
     items:
       - enum:
           - rockchip,px30-mipi-dsi
+          - rockchip,rk3128-mipi-dsi
           - rockchip,rk3288-mipi-dsi
           - rockchip,rk3399-mipi-dsi
           - rockchip,rk3568-mipi-dsi
@@ -77,6 +78,7 @@ allOf:
           contains:
             enum:
               - rockchip,px30-mipi-dsi
+              - rockchip,rk3128-mipi-dsi
               - rockchip,rk3568-mipi-dsi
               - rockchip,rv1126-mipi-dsi
 
diff --git a/dts/upstream/Bindings/display/st,stm32mp25-lvds.yaml b/dts/upstream/Bindings/display/st,stm32mp25-lvds.yaml
new file mode 100644
index 00000000000..6736f93256b
--- /dev/null
+++ b/dts/upstream/Bindings/display/st,stm32mp25-lvds.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32mp25-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 LVDS Display Interface Transmitter
+
+maintainers:
+  - Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
+
+description: |
+  The STMicroelectronics STM32 LVDS Display Interface Transmitter handles the
+  LVDS protocol: it maps the pixels received from the upstream Pixel-DMA (LTDC)
+  onto the LVDS PHY.
+
+  It is composed of three sub blocks:
+    - LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input
+      pixels onto the data lanes of the PHY
+    - LVDS PHY: parallelize the data and drives the LVDS data lanes
+    - LVDS wrapper: handles top-level settings
+
+  The LVDS controller driver supports the following high-level features:
+    - FDP-Link-I and OpenLDI (v0.95) protocols
+    - Single-Link or Dual-Link operation
+    - Single-Display or Double-Display (with the same content duplicated on both)
+    - Flexible Bit-Mapping, including JEIDA and VESA
+    - RGB888 or RGB666 output
+    - Synchronous design, with one input pixel per clock cycle
+
+properties:
+  compatible:
+    const: st,stm32mp25-lvds
+
+  "#clock-cells":
+    const: 0
+    description:
+      Provides the internal LVDS PHY clock to the framework.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB peripheral clock
+      - description: Reference clock for the internal PLL
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          LVDS input port node, connected to the LTDC RGB output port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          LVDS output port node, connected to a panel or bridge input port.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+    lvds: lvds@48060000 {
+        compatible = "st,stm32mp25-lvds";
+        reg = <0x48060000 0x2000>;
+        #clock-cells = <0>;
+        clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
+        clock-names = "pclk", "ref";
+        resets = <&rcc LVDS_R>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                lvds_in: endpoint {
+                   remote-endpoint = <&ltdc_ep1_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                lvds_out0: endpoint {
+                   remote-endpoint = <&lvds_panel_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/upstream/Bindings/dma/fsl,imx-dma.yaml b/dts/upstream/Bindings/dma/fsl,imx-dma.yaml
new file mode 100644
index 00000000000..902a11f65be
--- /dev/null
+++ b/dts/upstream/Bindings/dma/fsl,imx-dma.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,imx-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Direct Memory Access (DMA) Controller for i.MX
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx1-dma
+      - fsl,imx21-dma
+      - fsl,imx27-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: DMA complete interrupt
+      - description: DMA Error interrupt
+    minItems: 1
+
+  "#dma-cells":
+    const: 1
+
+  dma-channels:
+    const: 16
+
+  dma-requests:
+    description: Number of DMA requests supported.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-controller@10001000 {
+      compatible = "fsl,imx27-dma";
+      reg = <0x10001000 0x1000>;
+      interrupts = <32 33>;
+      #dma-cells = <1>;
+      dma-channels = <16>;
+    };
diff --git a/dts/upstream/Bindings/dma/fsl-imx-dma.txt b/dts/upstream/Bindings/dma/fsl-imx-dma.txt
deleted file mode 100644
index 1c9929d5372..00000000000
--- a/dts/upstream/Bindings/dma/fsl-imx-dma.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Freescale Direct Memory Access (DMA) Controller for i.MX
-
-This document will only describe differences to the generic DMA Controller and
-DMA request bindings as described in dma/dma.txt .
-
-* DMA controller
-
-Required properties:
-- compatible : Should be "fsl,<chip>-dma". chip can be imx1, imx21 or imx27
-- reg : Should contain DMA registers location and length
-- interrupts : First item should be DMA interrupt, second one is optional and
-    should contain DMA Error interrupt
-- #dma-cells : Has to be 1. imx-dma does not support anything else.
-
-Optional properties:
-- dma-channels : Number of DMA channels supported. Should be 16.
-- #dma-channels : deprecated
-- dma-requests : Number of DMA requests supported.
-- #dma-requests : deprecated
-
-Example:
-
-	dma: dma@10001000 {
-		compatible = "fsl,imx27-dma";
-		reg = <0x10001000 0x1000>;
-		interrupts = <32 33>;
-		#dma-cells = <1>;
-		dma-channels = <16>;
-	};
-
-
-* DMA client
-
-Clients have to specify the DMA requests with phandles in a list.
-
-Required properties:
-- dmas: List of one or more DMA request specifiers. One DMA request specifier
-    consists of a phandle to the DMA controller followed by the integer
-    specifying the request line.
-- dma-names: List of string identifiers for the DMA requests. For the correct
-    names, have a look at the specific client driver.
-
-Example:
-
-	sdhci1: sdhci@10013000 {
-		...
-		dmas = <&dma 7>;
-		dma-names = "rx-tx";
-		...
-	};
diff --git a/dts/upstream/Bindings/dma/fsl-qdma.txt b/dts/upstream/Bindings/dma/fsl-qdma.txt
deleted file mode 100644
index da371c4d406..00000000000
--- a/dts/upstream/Bindings/dma/fsl-qdma.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-NXP Layerscape SoC qDMA Controller
-==================================
-
-This device follows the generic DMA bindings defined in dma/dma.txt.
-
-Required properties:
-
-- compatible:		Must be one of
-			 "fsl,ls1021a-qdma": for LS1021A Board
-			 "fsl,ls1028a-qdma": for LS1028A Board
-			 "fsl,ls1043a-qdma": for ls1043A Board
-			 "fsl,ls1046a-qdma": for ls1046A Board
-- reg:			Should contain the register's base address and length.
-- interrupts:		Should contain a reference to the interrupt used by this
-			device.
-- interrupt-names:	Should contain interrupt names:
-			 "qdma-queue0": the block0 interrupt
-			 "qdma-queue1": the block1 interrupt
-			 "qdma-queue2": the block2 interrupt
-			 "qdma-queue3": the block3 interrupt
-			 "qdma-error":  the error interrupt
-- fsl,dma-queues:	Should contain number of queues supported.
-- dma-channels:	Number of DMA channels supported
-- block-number:	the virtual block number
-- block-offset:	the offset of different virtual block
-- status-sizes:	status queue size of per virtual block
-- queue-sizes:		command queue size of per virtual block, the size number
-			based on queues
-
-Optional properties:
-
-- dma-channels:		Number of DMA channels supported by the controller.
-- big-endian:		If present registers and hardware scatter/gather descriptors
-			of the qDMA are implemented in big endian mode, otherwise in little
-			mode.
-
-Examples:
-
-	qdma: dma-controller@8390000 {
-			compatible = "fsl,ls1021a-qdma";
-			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
-			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
-			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
-			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "qdma-error",
-				"qdma-queue0", "qdma-queue1";
-			dma-channels = <8>;
-			block-number = <2>;
-			block-offset = <0x1000>;
-			fsl,dma-queues = <2>;
-			status-sizes = <64>;
-			queue-sizes = <64 64>;
-			big-endian;
-		};
-
-DMA clients must use the format described in dma/dma.txt file.
diff --git a/dts/upstream/Bindings/dma/fsl-qdma.yaml b/dts/upstream/Bindings/dma/fsl-qdma.yaml
new file mode 100644
index 00000000000..1b9ebdbe528
--- /dev/null
+++ b/dts/upstream/Bindings/dma/fsl-qdma.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl-qdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Layerscape SoC qDMA Controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1021a-qdma
+      - fsl,ls1028a-qdma
+      - fsl,ls1043a-qdma
+      - fsl,ls1046a-qdma
+
+  reg:
+    items:
+      - description: Controller regs
+      - description: Status regs
+      - description: Block regs
+
+  interrupts:
+    minItems: 2
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: qdma-error
+      - const: qdma-queue0
+      - const: qdma-queue1
+      - const: qdma-queue2
+      - const: qdma-queue3
+
+  dma-channels:
+    minimum: 1
+    maximum: 64
+
+  fsl,dma-queues:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Should contain number of queues supported.
+    minimum: 1
+    maximum: 4
+
+  block-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the virtual block number
+
+  block-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the offset of different virtual block
+
+  status-sizes:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: status queue size of per virtual block
+
+  queue-sizes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      command queue size of per virtual block, the size number
+      based on queues
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present registers and hardware scatter/gather descriptors
+      of the qDMA are implemented in big endian mode, otherwise in little
+      mode.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - fsl,dma-queues
+  - block-number
+  - block-offset
+  - status-sizes
+  - queue-sizes
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1028a-qdma
+              - fsl,ls1043a-qdma
+              - fsl,ls1046a-qdma
+    then:
+      properties:
+        interrupts:
+          minItems: 5
+        interrupt-names:
+          minItems: 5
+    else:
+      properties:
+        interrupts:
+          maxItems: 3
+        interrupt-names:
+          maxItems: 3
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dma-controller@8390000 {
+        compatible = "fsl,ls1021a-qdma";
+        reg = <0x8388000 0x1000>, /* Controller regs */
+              <0x8389000 0x1000>, /* Status regs */
+              <0x838a000 0x2000>; /* Block regs */
+        interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1";
+        #dma-cells = <1>;
+        dma-channels = <8>;
+        block-number = <2>;
+        block-offset = <0x1000>;
+        status-sizes = <64>;
+        queue-sizes = <64 64>;
+        big-endian;
+        fsl,dma-queues = <2>;
+    };
+
diff --git a/dts/upstream/Bindings/dma/qcom,gpi.yaml b/dts/upstream/Bindings/dma/qcom,gpi.yaml
index deb64cb9ca3..4df4e61895d 100644
--- a/dts/upstream/Bindings/dma/qcom,gpi.yaml
+++ b/dts/upstream/Bindings/dma/qcom,gpi.yaml
@@ -27,6 +27,7 @@ properties:
               - qcom,qcm2290-gpi-dma
               - qcom,qdu1000-gpi-dma
               - qcom,sc7280-gpi-dma
+              - qcom,sdx75-gpi-dma
               - qcom,sm6115-gpi-dma
               - qcom,sm6375-gpi-dma
               - qcom,sm8350-gpi-dma
diff --git a/dts/upstream/Bindings/dma/sprd,sc9860-dma.yaml b/dts/upstream/Bindings/dma/sprd,sc9860-dma.yaml
new file mode 100644
index 00000000000..94647219c02
--- /dev/null
+++ b/dts/upstream/Bindings/dma/sprd,sc9860-dma.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/sprd,sc9860-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC9860 DMA controller
+
+description: |
+  There are three DMA controllers: AP DMA, AON DMA and AGCP DMA. For AGCP
+  DMA controller, it can or do not request the IRQ, which will save
+  system power without resuming system by DMA interrupts if AGCP DMA
+  does not request the IRQ.
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    const: sprd,sc9860-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: DMA enable clock
+      - description: optional ashb_eb clock, only for the AGCP DMA controller
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: enable
+      - const: ashb_eb
+
+  '#dma-cells':
+    const: 1
+
+  dma-channels:
+    const: 32
+
+  '#dma-channels':
+    const: 32
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#dma-cells'
+  - dma-channels
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    /* AP DMA controller */
+    dma-controller@20100000 {
+      compatible = "sprd,sc9860-dma";
+      reg = <0x20100000 0x4000>;
+      interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&apahb_gate CLK_DMA_EB>;
+      clock-names = "enable";
+      #dma-cells = <1>;
+      dma-channels = <32>;
+    };
+
+    /* AGCP DMA controller */
+    dma-controller@41580000 {
+      compatible = "sprd,sc9860-dma";
+      reg = <0x41580000 0x4000>;
+      clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
+               <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+      clock-names = "enable", "ashb_eb";
+      #dma-cells = <1>;
+      dma-channels = <32>;
+    };
+...
diff --git a/dts/upstream/Bindings/dma/sprd-dma.txt b/dts/upstream/Bindings/dma/sprd-dma.txt
deleted file mode 100644
index c7e9b5fd50e..00000000000
--- a/dts/upstream/Bindings/dma/sprd-dma.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* Spreadtrum DMA controller
-
-This binding follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain one interrupt shared by all channel.
-- #dma-cells: must be <1>. Used to represent the number of integer
-	cells in the dmas property of client device.
-- dma-channels : Number of DMA channels supported. Should be 32.
-- clock-names: Should contain the clock of the DMA controller.
-- clocks: Should contain a clock specifier for each entry in clock-names.
-
-Deprecated properties:
-- #dma-channels : Number of DMA channels supported. Should be 32.
-
-Example:
-
-Controller:
-apdma: dma-controller@20100000 {
-	compatible = "sprd,sc9860-dma";
-	reg = <0x20100000 0x4000>;
-	interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-	#dma-cells = <1>;
-	dma-channels = <32>;
-	clock-names = "enable";
-	clocks = <&clk_ap_ahb_gates 5>;
-};
-
-
-Client:
-DMA clients connected to the Spreadtrum DMA controller must use the format
-described in the dma.txt file, using a two-cell specifier for each channel.
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. The slave id.
-
-spi0: spi@70a00000{
-	...
-	dma-names = "rx_chn", "tx_chn";
-	dmas = <&apdma 11>, <&apdma 12>;
-	...
-};
diff --git a/dts/upstream/Bindings/dma/st,stm32-dma.yaml b/dts/upstream/Bindings/dma/stm32/st,stm32-dma.yaml
index ff935a0068e..11a289f1d50 100644
--- a/dts/upstream/Bindings/dma/st,stm32-dma.yaml
+++ b/dts/upstream/Bindings/dma/stm32/st,stm32-dma.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml#
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: STMicroelectronics STM32 DMA Controller
@@ -53,7 +53,7 @@ maintainers:
   - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
-  - $ref: dma-controller.yaml#
+  - $ref: /schemas/dma/dma-controller.yaml#
 
 properties:
   "#dma-cells":
diff --git a/dts/upstream/Bindings/dma/stm32/st,stm32-dma3.yaml b/dts/upstream/Bindings/dma/stm32/st,stm32-dma3.yaml
new file mode 100644
index 00000000000..7fdc44b2e64
--- /dev/null
+++ b/dts/upstream/Bindings/dma/stm32/st,stm32-dma3.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dma3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA3 Controller
+
+description: |
+  The STM32 DMA3 is a direct memory access controller with different features
+  depending on its hardware configuration.
+  It is either called LPDMA (Low Power), GPDMA (General Purpose) or HPDMA (High
+  Performance).
+  Its hardware configuration registers allow to dynamically expose its features.
+
+  GPDMA and HPDMA support 16 independent DMA channels, while only 4 for LPDMA.
+  GPDMA and HPDMA support 256 DMA requests from peripherals, 8 for LPDMA.
+
+  Bindings are generic for these 3 STM32 DMA3 configurations.
+
+  DMA clients connected to the STM32 DMA3 controller must use the format
+  described in "#dma-cells" property description below, using a three-cell
+  specifier for each channel.
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+  - $ref: /schemas/dma/dma-controller.yaml#
+
+properties:
+  compatible:
+    const: st,stm32mp25-dma3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 4
+    maxItems: 16
+    description:
+      Should contain all of the per-channel DMA interrupts in ascending order
+      with respect to the DMA channel index.
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 3
+    description: |
+      Specifies the number of cells needed to provide DMA controller specific
+      information.
+      The first cell is the request line number.
+      The second cell is a 32-bit mask specifying the DMA channel requirements:
+        -bit 0-1: The priority level
+          0x0: low priority, low weight
+          0x1: low priority, mid weight
+          0x2: low priority, high weight
+          0x3: high priority
+        -bit 4-7: The FIFO requirement for queuing source/destination transfers
+          0x0: no FIFO requirement/any channel can fit
+          0x2: FIFO of 8 bytes (2^2+1)
+          0x4: FIFO of 32 bytes (2^4+1)
+          0x6: FIFO of 128 bytes (2^6+1)
+          0x7: FIFO of 256 bytes (2^7+1)
+      The third cell is a 32-bit mask specifying the DMA transfer requirements:
+        -bit 0: The source incrementing burst
+          0x0: fixed burst
+          0x1: contiguously incremented burst
+        -bit 1: The source allocated port
+          0x0: port 0 is allocated to the source transfer
+          0x1: port 1 is allocated to the source transfer
+        -bit 4: The destination incrementing burst
+          0x0: fixed burst
+          0x1: contiguously incremented burst
+        -bit 5: The destination allocated port
+          0x0: port 0 is allocated to the destination transfer
+          0x1: port 1 is allocated to the destination transfer
+        -bit 8: The type of hardware request
+          0x0: burst
+          0x1: block
+        -bit 9: The control mode
+          0x0: DMA controller control mode
+          0x1: peripheral control mode
+        -bit 12-13: The transfer complete event mode
+          0x0: at block level, transfer complete event is generated at the end
+               of a block
+          0x2: at LLI level, the transfer complete event is generated at the end
+               of the LLI transfer
+               including the update of the LLI if any
+          0x3: at channel level, the transfer complete event is generated at the
+               end of the last LLI
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#dma-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    dma-controller@40400000 {
+      compatible = "st,stm32mp25-dma3";
+      reg = <0x40400000 0x1000>;
+      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&rcc CK_BUS_HPDMA1>;
+      #dma-cells = <3>;
+    };
+...
diff --git a/dts/upstream/Bindings/dma/st,stm32-dmamux.yaml b/dts/upstream/Bindings/dma/stm32/st,stm32-dmamux.yaml
index ddf82bf1e71..f26c914a3a9 100644
--- a/dts/upstream/Bindings/dma/st,stm32-dmamux.yaml
+++ b/dts/upstream/Bindings/dma/stm32/st,stm32-dmamux.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml#
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dmamux.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: STMicroelectronics STM32 DMA MUX (DMA request router)
@@ -10,7 +10,7 @@ maintainers:
   - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
-  - $ref: dma-router.yaml#
+  - $ref: /schemas/dma/dma-router.yaml#
 
 properties:
   "#dma-cells":
diff --git a/dts/upstream/Bindings/dma/st,stm32-mdma.yaml b/dts/upstream/Bindings/dma/stm32/st,stm32-mdma.yaml
index 3874544dfa7..45fe91db11d 100644
--- a/dts/upstream/Bindings/dma/st,stm32-mdma.yaml
+++ b/dts/upstream/Bindings/dma/stm32/st,stm32-mdma.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-mdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: STMicroelectronics STM32 MDMA Controller
@@ -53,7 +53,7 @@ maintainers:
   - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
-  - $ref: dma-controller.yaml#
+  - $ref: /schemas/dma/dma-controller.yaml#
 
 properties:
   "#dma-cells":
diff --git a/dts/upstream/Bindings/eeprom/at24.yaml b/dts/upstream/Bindings/eeprom/at24.yaml
index 3c36cd0510d..e396e47b2f1 100644
--- a/dts/upstream/Bindings/eeprom/at24.yaml
+++ b/dts/upstream/Bindings/eeprom/at24.yaml
@@ -18,7 +18,9 @@ select:
   properties:
     compatible:
       contains:
-        pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+        anyOf:
+          - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+          - enum: ["microchip,24aa025e48", "microchip,24aa025e64"]
   required:
     - compatible
 
@@ -103,9 +105,6 @@ properties:
       # These are special cases that don't conform to the above pattern.
       # Each requires a standard at24 model as fallback.
       - items:
-          - const: belling,bl24c16a
-          - const: atmel,24c16
-      - items:
           - enum:
               - rohm,br24g01
               - rohm,br24t01
@@ -122,16 +121,25 @@ properties:
               - rohm,br24g04
           - const: atmel,24c04
       - items:
-          - const: renesas,r1ex24016
+          - enum:
+              - belling,bl24c16a
+              - renesas,r1ex24016
           - const: atmel,24c16
       - items:
           - const: giantec,gt24c32a
           - const: atmel,24c32
       - items:
+          - const: onnn,n24s64b
+          - const: atmel,24c64
+      - items:
           - enum:
               - renesas,r1ex24128
               - samsung,s524ad0xd1
           - const: atmel,24c128
+      - items:
+          - const: microchip,24aa025e48
+      - items:
+          - const: microchip,24aa025e64
       - pattern: '^atmel,24c(32|64)d-wl$' # Actual vendor is st
 
   label:
diff --git a/dts/upstream/Bindings/eeprom/at25.yaml b/dts/upstream/Bindings/eeprom/at25.yaml
index 1715b0c9fee..c31e5e71952 100644
--- a/dts/upstream/Bindings/eeprom/at25.yaml
+++ b/dts/upstream/Bindings/eeprom/at25.yaml
@@ -28,6 +28,7 @@ properties:
               - anvo,anv32e61w
               - atmel,at25256B
               - fujitsu,mb85rs1mt
+              - fujitsu,mb85rs256
               - fujitsu,mb85rs64
               - microchip,at25160bn
               - microchip,25lc040
diff --git a/dts/upstream/Bindings/firmware/arm,scmi.yaml b/dts/upstream/Bindings/firmware/arm,scmi.yaml
index 7de2c29606e..4d823f3b1f0 100644
--- a/dts/upstream/Bindings/firmware/arm,scmi.yaml
+++ b/dts/upstream/Bindings/firmware/arm,scmi.yaml
@@ -72,14 +72,17 @@ properties:
           - const: tx
           - const: tx_reply
           - const: rx
+          - const: rx_reply
         minItems: 2
 
   mboxes:
     description:
       List of phandle and mailbox channel specifiers. It should contain
-      exactly one, two or three mailboxes; the first one or two for transmitting
-      messages ("tx") and another optional ("rx") for receiving notifications
-      and delayed responses, if supported by the platform.
+      exactly one, two, three or four mailboxes; the first one or two for
+      transmitting messages ("tx") and another optional ("rx") for receiving
+      notifications and delayed responses, if supported by the platform.
+      The optional ("rx_reply") is for notifications completion interrupt,
+      if supported by the platform.
       The number of mailboxes needed for transmitting messages depends on the
       type of channels exposed by the specific underlying mailbox controller;
       one single channel descriptor is enough if such channel is bidirectional,
@@ -92,9 +95,10 @@ properties:
        2 mbox / 2 shmem => SCMI TX and RX over 2 mailbox bidirectional channels
        2 mbox / 1 shmem => SCMI TX over 2 mailbox unidirectional channels
        3 mbox / 2 shmem => SCMI TX and RX over 3 mailbox unidirectional channels
+       4 mbox / 2 shmem => SCMI TX and RX over 4 mailbox unidirectional channels
       Any other combination of mboxes and shmem is invalid.
     minItems: 1
-    maxItems: 3
+    maxItems: 4
 
   shmem:
     description:
@@ -251,7 +255,9 @@ properties:
     type: object
     allOf:
       - $ref: '#/$defs/protocol-node'
-      - $ref: /schemas/pinctrl/pinctrl.yaml
+      - anyOf:
+          - $ref: /schemas/pinctrl/pinctrl.yaml
+          - $ref: /schemas/firmware/nxp,imx95-scmi-pinctrl.yaml
 
     unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/firmware/cznic,turris-omnia-mcu.yaml b/dts/upstream/Bindings/firmware/cznic,turris-omnia-mcu.yaml
new file mode 100644
index 00000000000..af9249695ef
--- /dev/null
+++ b/dts/upstream/Bindings/firmware/cznic,turris-omnia-mcu.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/cznic,turris-omnia-mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CZ.NIC's Turris Omnia MCU
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+description:
+  The MCU on Turris Omnia acts as a system controller providing additional
+  GPIOs, interrupts, watchdog, system power off and wakeup configuration.
+
+properties:
+  compatible:
+    const: cznic,turris-omnia-mcu
+
+  reg:
+    description: MCU I2C slave address
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The first cell specifies the interrupt number (0 to 63), the second cell
+      specifies interrupt type (which can be one of IRQ_TYPE_EDGE_RISING,
+      IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH).
+      The interrupt numbers correspond sequentially to GPIO numbers, taking the
+      GPIO banks into account:
+        IRQ number   GPIO bank   GPIO pin within bank
+           0 - 15      0           0 - 15
+          16 - 47      1           0 - 31
+          48 - 63      2           0 - 15
+      There are several exceptions:
+        IRQ number   meaning
+          11           LED panel brightness changed by button press
+          13           TRNG entropy ready
+          14           ECDSA message signature computation done
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 3
+    description:
+      The first cell is bank number (0, 1 or 2), the second cell is pin number
+      within the bank (0 to 15 for banks 0 and 2, 0 to 31 for bank 1), and the
+      third cell specifies consumer flags.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        system-controller@2a {
+            compatible = "cznic,turris-omnia-mcu";
+            reg = <0x2a>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <11 IRQ_TYPE_NONE>;
+
+            gpio-controller;
+            #gpio-cells = <3>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/dts/upstream/Bindings/firmware/nxp,imx95-scmi-pinctrl.yaml b/dts/upstream/Bindings/firmware/nxp,imx95-scmi-pinctrl.yaml
new file mode 100644
index 00000000000..a96fc6cce50
--- /dev/null
+++ b/dts/upstream/Bindings/firmware/nxp,imx95-scmi-pinctrl.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2024 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/nxp,imx95-scmi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX System Control and Management Interface (SCMI) Pinctrl Protocol
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+allOf:
+  - $ref: /schemas/pinctrl/pinctrl.yaml
+
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    unevaluatedProperties: false
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx95-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin.
+          Please refer to i.MX95 Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+additionalProperties: true
diff --git a/dts/upstream/Bindings/firmware/qcom,scm.yaml b/dts/upstream/Bindings/firmware/qcom,scm.yaml
index 47d3d2d52ac..2cc83771d8e 100644
--- a/dts/upstream/Bindings/firmware/qcom,scm.yaml
+++ b/dts/upstream/Bindings/firmware/qcom,scm.yaml
@@ -93,6 +93,11 @@ properties:
       protocol to handle sleeping SCM calls.
     maxItems: 1
 
+  memory-region:
+    description:
+      Phandle to the memory region reserved for the shared memory bridge to TZ.
+    maxItems: 1
+
   qcom,sdi-enabled:
     description:
       Indicates that the SDI (Secure Debug Image) has been enabled by TZ
@@ -193,6 +198,16 @@ allOf:
     then:
       properties:
         interrupts: false
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,scm-sa8775p
+    then:
+      properties:
+        memory-region: false
 
 required:
   - compatible
diff --git a/dts/upstream/Bindings/fsi/aspeed,ast2600-fsi-master.yaml b/dts/upstream/Bindings/fsi/aspeed,ast2600-fsi-master.yaml
new file mode 100644
index 00000000000..dfcc2fafa68
--- /dev/null
+++ b/dts/upstream/Bindings/fsi/aspeed,ast2600-fsi-master.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The AST2600 and later contain two identical FSI masters. They share a
+  clock and have a separate interrupt line and output pins.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-fsi-master
+      - aspeed,ast2700-fsi-master
+
+  clocks:
+    maxItems: 1
+
+  cfam-reset-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin for CFAM reset
+
+  fsi-routing-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin for setting the FSI mux (internal or cabled)
+
+  fsi-mux-gpios:
+    maxItems: 1
+    description:
+      Input GPIO pin for detecting the desired FSI mux state
+
+  interrupts:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - aspeed,ast2600-fsi-master
+then:
+  properties:
+    reg:
+      maxItems: 1
+else:
+  properties:
+    reg:
+      minItems: 1
+      items:
+        - description: OPB control registers
+        - description: FSI controller registers
+        - description: FSI link address space
+    reg-names:
+      items:
+        - const: opb
+        - const: ctrl
+        - const: fsi
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+allOf:
+  - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    #include <dt-bindings/gpio/aspeed-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    fsi-master@1e79b000 {
+        compatible = "aspeed,ast2600-fsi-master";
+        reg = <0x1e79b000 0x94>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_fsi1_default>;
+        clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+        fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+        fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+        cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+
+        cfam@0,0 {
+            reg = <0 0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            chip-id = <0>;
+        };
+    };
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        fsi-master@21800000 {
+            compatible = "aspeed,ast2700-fsi-master";
+            reg = <0x0 0x21800000 0x0 0x100>,
+                  <0x0 0x21000000 0x0 0x1000>,
+                  <0x0 0x20000000 0x0 0x1000000>;
+            reg-names = "opb", "ctrl", "fsi";
+            #interrupt-cells = <1>;
+            interrupt-controller;
+            interrupts-extended = <&intc 6>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_fsi0_default>;
+            clocks = <&syscon 40>;
+        };
+    };
diff --git a/dts/upstream/Bindings/fsi/fsi-controller.yaml b/dts/upstream/Bindings/fsi/fsi-controller.yaml
new file mode 100644
index 00000000000..ffe191921b2
--- /dev/null
+++ b/dts/upstream/Bindings/fsi/fsi-controller.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSI Controller Common Properties
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  FSI (FRU (Field Replaceable Unit) Service Interface) is a two wire bus. The
+  FSI bus is connected to a CFAM (Common FRU Access Macro) which contains
+  various engines such as I2C controllers, SPI controllers, etc.
+
+properties:
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+  '#interrupt-cells':
+    const: 1
+
+  bus-frequency:
+    minimum: 1
+    maximum: 200000000
+
+  interrupt-controller: true
+
+  no-scan-on-init:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The FSI controller cannot scan the bus during initialization.
+
+patternProperties:
+  "cfam@[0-9a-f],[0-9a-f]":
+    type: object
+    properties:
+      chip-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Processor index, a global unique chip ID which is used to identify
+          the physical location of the chip in a system specific way.
+
+      bus-frequency:
+        minimum: 1
+        maximum: 100000000
+
+      reg:
+        maxItems: 1
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+    required:
+      - reg
+
+    additionalProperties: true
+
+additionalProperties: true
diff --git a/dts/upstream/Bindings/fsi/fsi-master-aspeed.txt b/dts/upstream/Bindings/fsi/fsi-master-aspeed.txt
deleted file mode 100644
index 9853fefff5d..00000000000
--- a/dts/upstream/Bindings/fsi/fsi-master-aspeed.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device-tree bindings for AST2600 FSI master
--------------------------------------------
-
-The AST2600 contains two identical FSI masters. They share a clock and have a
-separate interrupt line and output pins.
-
-Required properties:
- - compatible: "aspeed,ast2600-fsi-master"
- - reg: base address and length
- - clocks: phandle and clock number
- - interrupts: platform dependent interrupt description
- - pinctrl-0: phandle to pinctrl node
- - pinctrl-names: pinctrl state
-
-Optional properties:
- - cfam-reset-gpios: GPIO for CFAM reset
-
- - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
- - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
-
-
-Examples:
-
-    fsi-master {
-        compatible = "aspeed,ast2600-fsi-master", "fsi-master";
-        reg = <0x1e79b000 0x94>;
-	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fsi1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-
-	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
-	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-    };
diff --git a/dts/upstream/Bindings/fsi/ibm,fsi2spi.yaml b/dts/upstream/Bindings/fsi/ibm,fsi2spi.yaml
index e2ca0b00047..ad5c83f4842 100644
--- a/dts/upstream/Bindings/fsi/ibm,fsi2spi.yaml
+++ b/dts/upstream/Bindings/fsi/ibm,fsi2spi.yaml
@@ -9,11 +9,10 @@ title: IBM FSI-attached SPI controllers
 maintainers:
   - Eddie James <eajames@linux.ibm.com>
 
-description: |
+description:
   This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
-  node will always be a child of an FSI CFAM node; see fsi.txt for details on
-  FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of
-  SPI controllers.
+  node will always be a child of an FSI CFAM node. This FSI2SPI engine provides
+  access to a number of SPI controllers.
 
 properties:
   compatible:
@@ -24,6 +23,17 @@ properties:
     items:
       - description: FSI slave address
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^spi@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/spi/ibm,spi-fsi.yaml
+
 required:
   - compatible
   - reg
@@ -35,4 +45,22 @@ examples:
     fsi2spi@1c00 {
         compatible = "ibm,fsi2spi";
         reg = <0x1c00 0x400>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi@0 {
+            compatible = "ibm,spi-fsi";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eeprom@0 {
+                compatible = "atmel,at25";
+                reg = <0>;
+                address-width = <24>;
+                pagesize = <256>;
+                size = <0x80000>;
+                spi-max-frequency = <1000000>;
+            };
+        };
     };
diff --git a/dts/upstream/Bindings/fsi/ibm,i2cr-fsi-master.yaml b/dts/upstream/Bindings/fsi/ibm,i2cr-fsi-master.yaml
index 442cecdc57c..e49ace3ca33 100644
--- a/dts/upstream/Bindings/fsi/ibm,i2cr-fsi-master.yaml
+++ b/dts/upstream/Bindings/fsi/ibm,i2cr-fsi-master.yaml
@@ -26,7 +26,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/fsi/ibm,p9-fsi-controller.yaml b/dts/upstream/Bindings/fsi/ibm,p9-fsi-controller.yaml
new file mode 100644
index 00000000000..29ea80ff915
--- /dev/null
+++ b/dts/upstream/Bindings/fsi/ibm,p9-fsi-controller.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached FSI Hub Controller
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The FSI Hub Controller is an FSI controller, providing a number of FSI links,
+  located on a CFAM. Therefore this node will always be a child of an FSI CFAM
+  node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-fsi-controller
+
+  reg:
+    items:
+      - description: FSI slave address
+
+allOf:
+  - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fsi@3400 {
+        compatible = "ibm,p9-fsi-controller";
+        reg = <0x3400 0x400>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cfam@0,0 {
+            reg = <0 0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            chip-id = <0>;
+        };
+    };
diff --git a/dts/upstream/Bindings/fsi/ibm,p9-occ.txt b/dts/upstream/Bindings/fsi/ibm,p9-occ.txt
deleted file mode 100644
index e73358075a9..00000000000
--- a/dts/upstream/Bindings/fsi/ibm,p9-occ.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
------------------------------------------------------------------------------
-
-This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
-a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
-nodes. The OCC is not an FSI slave device itself, rather it is accessed
-through the SBE FIFO.
-
-Required properties:
- - compatible = "ibm,p9-occ" or "ibm,p10-occ"
-
-Examples:
-
-    occ {
-        compatible = "ibm,p9-occ";
-    };
diff --git a/dts/upstream/Bindings/fsi/ibm,p9-occ.yaml b/dts/upstream/Bindings/fsi/ibm,p9-occ.yaml
new file mode 100644
index 00000000000..537eac70447
--- /dev/null
+++ b/dts/upstream/Bindings/fsi/ibm,p9-occ.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached On-Chip Controller (OCC)
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The POWER processor On-Chip Controller (OCC) helps manage power and
+  thermals for the system, accessed through the FSI-attached SBEFIFO
+  from a service processor.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-occ
+      - ibm,p10-occ
+
+  hwmon:
+    type: object
+    $ref: /schemas/hwmon/ibm,occ-hwmon.yaml
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    occ {
+        compatible = "ibm,p9-occ";
+
+        hwmon {
+            compatible = "ibm,p9-occ-hwmon";
+        };
+    };
diff --git a/dts/upstream/Bindings/fsi/ibm,p9-sbefifo.yaml b/dts/upstream/Bindings/fsi/ibm,p9-sbefifo.yaml
new file mode 100644
index 00000000000..3cd966fb3c0
--- /dev/null
+++ b/dts/upstream/Bindings/fsi/ibm,p9-sbefifo.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-sbefifo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SBEFIFO engine
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The SBEFIFO is an FSI CFAM engine that provides an interface to the
+  POWER processor Self Boot Engine (SBE). This node will always be a child
+  of an FSI CFAM node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-sbefifo
+      - ibm,odyssey-sbefifo
+
+  reg:
+    items:
+      - description: FSI slave address
+
+  occ:
+    type: object
+    $ref: ibm,p9-occ.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    fsi-slave-engine@2400 {
+        compatible = "ibm,p9-sbefifo";
+        reg = <0x2400 0x400>;
+
+        occ {
+            compatible = "ibm,p9-occ";
+        };
+    };
diff --git a/dts/upstream/Bindings/fsi/ibm,p9-scom.yaml b/dts/upstream/Bindings/fsi/ibm,p9-scom.yaml
new file mode 100644
index 00000000000..8cd14a70bed
--- /dev/null
+++ b/dts/upstream/Bindings/fsi/ibm,p9-scom.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-scom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SCOM engine
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The SCOM engine is an interface to the POWER processor PIB (Pervasive
+  Interconnect Bus). This node will always be a child of an FSI CFAM node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-scom
+      - ibm,i2cr-scom
+
+  reg:
+    items:
+      - description: FSI slave address
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    scom@1000 {
+        compatible = "ibm,p9-scom";
+        reg = <0x1000 0x400>;
+    };
diff --git a/dts/upstream/Bindings/fuse/renesas,rcar-efuse.yaml b/dts/upstream/Bindings/fuse/renesas,rcar-efuse.yaml
new file mode 100644
index 00000000000..d7e289244e7
--- /dev/null
+++ b/dts/upstream/Bindings/fuse/renesas,rcar-efuse.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fuse/renesas,rcar-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: R-Car E-FUSE connected to PFC
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The E-FUSE is a type of non-volatile memory, which is accessible through the
+  Pin Function Controller (PFC) on some R-Car Gen4 SoCs.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a779a0-efuse # R-Car V3U
+      - renesas,r8a779f0-efuse # R-Car S4-8
+
+  reg:
+    maxItems: 1
+    description: PFC System Group Fuse Control and Monitor register block
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    fuse: fuse@e6078800 {
+            compatible = "renesas,r8a779a0-efuse";
+            reg = <0xe6078800 0x100>;
+            clocks = <&cpg CPG_MOD 916>;
+            power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+            resets = <&cpg 916>;
+    };
diff --git a/dts/upstream/Bindings/fuse/renesas,rcar-otp.yaml b/dts/upstream/Bindings/fuse/renesas,rcar-otp.yaml
new file mode 100644
index 00000000000..d74872ae9ff
--- /dev/null
+++ b/dts/upstream/Bindings/fuse/renesas,rcar-otp.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fuse/renesas,rcar-otp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: R-Car E-FUSE connected to OTP_MEM
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The E-FUSE is a type of non-volatile memory, which is accessible through the
+  One-Time Programmable Memory (OTP_MEM) module on some R-Car Gen4 SoCs.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a779g0-otp # R-CarV4H
+      - renesas,r8a779h0-otp # R-CarV4M
+
+  reg:
+    items:
+      - description: OTP_MEM_0
+      - description: OTP_MEM_1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    otp: otp@e61be000 {
+            compatible = "renesas,r8a779g0-otp";
+            reg = <0xe61be000 0x1000>, <0xe61bf000 0x1000>;
+    };
diff --git a/dts/upstream/Bindings/gpio/aspeed,sgpio.yaml b/dts/upstream/Bindings/gpio/aspeed,sgpio.yaml
index 46bb121360d..1046f0331c0 100644
--- a/dts/upstream/Bindings/gpio/aspeed,sgpio.yaml
+++ b/dts/upstream/Bindings/gpio/aspeed,sgpio.yaml
@@ -33,6 +33,11 @@ properties:
 
   gpio-controller: true
 
+  # Each SGPIO is represented as a pair of input and output GPIOs
+  gpio-line-names:
+    minItems: 160
+    maxItems: 256
+
   '#gpio-cells':
     const: 2
 
@@ -41,6 +46,9 @@ properties:
 
   interrupt-controller: true
 
+  '#interrupt-cells':
+    const: 2
+
   clocks:
     maxItems: 1
 
@@ -55,6 +63,7 @@ required:
   - '#gpio-cells'
   - interrupts
   - interrupt-controller
+  - '#interrupt-cells'
   - ngpios
   - clocks
   - bus-frequency
@@ -72,6 +81,7 @@ examples:
         reg = <0x1e780200 0x0100>;
         clocks = <&syscon ASPEED_CLK_APB>;
         interrupt-controller;
+        #interrupt-cells = <2>;
         ngpios = <80>;
         bus-frequency = <12000000>;
     };
diff --git a/dts/upstream/Bindings/gpio/atmel,at91rm9200-gpio.yaml b/dts/upstream/Bindings/gpio/atmel,at91rm9200-gpio.yaml
new file mode 100644
index 00000000000..3dd70933ed8
--- /dev/null
+++ b/dts/upstream/Bindings/gpio/atmel,at91rm9200-gpio.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/atmel,at91rm9200-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip GPIO controller (PIO)
+
+maintainers:
+  - Manikandan Muralidharan <manikandan.m@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9x5-gpio
+              - microchip,sam9x60-gpio
+          - const: atmel,at91rm9200-gpio
+      - items:
+          - enum:
+              - microchip,sam9x7-gpio
+          - const: microchip,sam9x60-gpio
+          - const: atmel,at91rm9200-gpio
+      - items:
+          - const: atmel,at91rm9200-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+  gpio-line-names: true
+
+  "#gpio-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-lines":
+    description:
+      Number of gpio, 32 by default if absent
+    maxItems: 1
+    default: 32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-controller
+  - "#gpio-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@fffff400 {
+            compatible = "atmel,at91rm9200-gpio";
+            reg = <0xfffff400 0x200>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+            #gpio-cells = <2>;
+            gpio-controller;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+    };
+...
diff --git a/dts/upstream/Bindings/gpio/fsl,qoriq-gpio.yaml b/dts/upstream/Bindings/gpio/fsl,qoriq-gpio.yaml
new file mode 100644
index 00000000000..84fd82291ee
--- /dev/null
+++ b/dts/upstream/Bindings/gpio/fsl,qoriq-gpio.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl,qoriq-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,mpc5121-gpio
+          - fsl,mpc5125-gpio
+          - fsl,mpc8349-gpio
+          - fsl,mpc8572-gpio
+          - fsl,mpc8610-gpio
+          - fsl,pq3-gpio
+      - items:
+          - enum:
+              - fsl,ls1021a-gpio
+              - fsl,ls1028a-gpio
+              - fsl,ls1043a-gpio
+              - fsl,ls1046a-gpio
+              - fsl,ls1088a-gpio
+              - fsl,ls2080a-gpio
+          - const: fsl,qoriq-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      GPIO registers are used as little endian. If not
+      present registers are used as big endian by default.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1100 {
+        compatible = "fsl,mpc5125-gpio";
+        reg = <0x1100 0x080>;
+        interrupts = <78 0x8>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpio@2300000 {
+        compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+        reg = <0x2300000 0x10000>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        little-endian;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/dts/upstream/Bindings/gpio/fsl-imx-gpio.yaml b/dts/upstream/Bindings/gpio/fsl-imx-gpio.yaml
index 918776d16ef..e1fc8bb6d37 100644
--- a/dts/upstream/Bindings/gpio/fsl-imx-gpio.yaml
+++ b/dts/upstream/Bindings/gpio/fsl-imx-gpio.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX/MXC GPIO controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 properties:
   compatible:
diff --git a/dts/upstream/Bindings/gpio/gpio-mpc8xxx.txt b/dts/upstream/Bindings/gpio/gpio-mpc8xxx.txt
deleted file mode 100644
index cd28e932bf5..00000000000
--- a/dts/upstream/Bindings/gpio/gpio-mpc8xxx.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
-
-Required properties:
-- compatible : Should be "fsl,<soc>-gpio"
-  The following <soc>s are known to be supported:
-	mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq,
-	ls1021a, ls1043a, ls2080a, ls1028a, ls1088a.
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-
-Optional properties:
-- little-endian : GPIO registers are used as little endian. If not
-                  present registers are used as big endian by default.
-
-Example of gpio-controller node for a mpc5125 SoC:
-
-gpio0: gpio@1100 {
-	compatible = "fsl,mpc5125-gpio";
-	#gpio-cells = <2>;
-	reg = <0x1100 0x080>;
-	interrupts = <78 0x8>;
-};
-
-Example of gpio-controller node for a ls2080a SoC:
-
-gpio0: gpio@2300000 {
-	compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
-	reg = <0x0 0x2300000 0x0 0x10000>;
-	interrupts = <0 36 0x4>; /* Level high type */
-	gpio-controller;
-	little-endian;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-
-Example of gpio-controller node for a ls1028a/ls1088a SoC:
-
-gpio1: gpio@2300000 {
-	compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
-	reg = <0x0 0x2300000 0x0 0x10000>;
-	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	little-endian;
-};
diff --git a/dts/upstream/Bindings/gpio/gpio-mxs.yaml b/dts/upstream/Bindings/gpio/gpio-mxs.yaml
index dfa1133f8c5..8ff54369d16 100644
--- a/dts/upstream/Bindings/gpio/gpio-mxs.yaml
+++ b/dts/upstream/Bindings/gpio/gpio-mxs.yaml
@@ -8,7 +8,6 @@ title: Freescale MXS GPIO controller
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Anson Huang <Anson.Huang@nxp.com>
 
 description: |
   The Freescale MXS GPIO controller is part of MXS PIN controller.
diff --git a/dts/upstream/Bindings/gpio/gpio-pca95xx.yaml b/dts/upstream/Bindings/gpio/gpio-pca95xx.yaml
index 99febb8ea1b..51e8390d6b3 100644
--- a/dts/upstream/Bindings/gpio/gpio-pca95xx.yaml
+++ b/dts/upstream/Bindings/gpio/gpio-pca95xx.yaml
@@ -66,6 +66,7 @@ properties:
               - ti,tca6408
               - ti,tca6416
               - ti,tca6424
+              - ti,tca9535
               - ti,tca9538
               - ti,tca9539
               - ti,tca9554
diff --git a/dts/upstream/Bindings/gpio/gpio-vf610.yaml b/dts/upstream/Bindings/gpio/gpio-vf610.yaml
index a27f9295025..cabda2eab4a 100644
--- a/dts/upstream/Bindings/gpio/gpio-vf610.yaml
+++ b/dts/upstream/Bindings/gpio/gpio-vf610.yaml
@@ -51,6 +51,10 @@ properties:
 
   gpio-controller: true
 
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
   clocks:
     items:
       - description: SoC GPIO clock
diff --git a/dts/upstream/Bindings/gpio/gpio-zevio.txt b/dts/upstream/Bindings/gpio/gpio-zevio.txt
deleted file mode 100644
index a37bd9ae273..00000000000
--- a/dts/upstream/Bindings/gpio/gpio-zevio.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Zevio GPIO controller
-
-Required properties:
-- compatible: Should be "lsi,zevio-gpio"
-- reg: Address and length of the register set for the device
-- #gpio-cells: Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
-- gpio-controller: Marks the device node as a GPIO controller.
-
-Example:
-	gpio: gpio@90000000 {
-		compatible = "lsi,zevio-gpio";
-		reg = <0x90000000 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/dts/upstream/Bindings/gpio/gpio_atmel.txt b/dts/upstream/Bindings/gpio/gpio_atmel.txt
deleted file mode 100644
index 29416f9c322..00000000000
--- a/dts/upstream/Bindings/gpio/gpio_atmel.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Atmel GPIO controller (PIO)
-
-Required properties:
-- compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5.
-- reg: Should contain GPIO controller registers location and length
-- interrupts: Should be the port interrupt shared by all the pins.
-- #gpio-cells: Should be two.  The first cell is the pin number and
-  the second cell is used to specify optional parameters to declare if the GPIO
-  is active high or low. See gpio.txt.
-- gpio-controller: Marks the device node as a GPIO controller.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two. The first cell is the pin number and the
-  second cell is used to specify irq type flags, see the two cell description
-  in interrupt-controller/interrupts.txt for details.
-
-optional properties:
-- #gpio-lines: Number of gpio if absent 32.
-
-
-Example:
-	pioA: gpio@fffff200 {
-		compatible = "atmel,at91rm9200-gpio";
-		reg = <0xfffff200 0x100>;
-		interrupts = <2 4>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#gpio-lines = <19>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
diff --git a/dts/upstream/Bindings/gpio/lsi,zevio-gpio.yaml b/dts/upstream/Bindings/gpio/lsi,zevio-gpio.yaml
new file mode 100644
index 00000000000..e9e201a489e
--- /dev/null
+++ b/dts/upstream/Bindings/gpio/lsi,zevio-gpio.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/lsi,zevio-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zevio GPIO controller
+
+maintainers:
+  - Pratik Farkase <pratikfarkase94@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: lsi,zevio-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gpio@90000000 {
+        compatible = "lsi,zevio-gpio";
+        reg = <0x90000000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
diff --git a/dts/upstream/Bindings/gpu/arm,mali-bifrost.yaml b/dts/upstream/Bindings/gpu/arm,mali-bifrost.yaml
index e796a1ff8c8..278399adc55 100644
--- a/dts/upstream/Bindings/gpu/arm,mali-bifrost.yaml
+++ b/dts/upstream/Bindings/gpu/arm,mali-bifrost.yaml
@@ -34,6 +34,7 @@ properties:
           - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
       - items:
           - enum:
+              - mediatek,mt8188-mali
               - mediatek,mt8192-mali
           - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
 
@@ -195,7 +196,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: mediatek,mt8183b-mali
+            enum:
+              - mediatek,mt8183b-mali
+              - mediatek,mt8188-mali
     then:
       properties:
         power-domains:
diff --git a/dts/upstream/Bindings/hwmon/g762.txt b/dts/upstream/Bindings/hwmon/g762.txt
deleted file mode 100644
index 6d154c4923d..00000000000
--- a/dts/upstream/Bindings/hwmon/g762.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-GMT G762/G763 PWM Fan controller
-
-Required node properties:
-
- - "compatible": must be either "gmt,g762" or "gmt,g763"
- - "reg": I2C bus address of the device
- - "clocks": a fixed clock providing input clock frequency
-	     on CLK pin of the chip.
-
-Optional properties:
-
- - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3.
-	       The higher the more.
-
- - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty)
-	       and 1 (negative duty).
-
- - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2.
-
-If an optional property is not set in .dts file, then current value is kept
-unmodified (e.g. u-boot installed value).
-
-Additional information on operational parameters for the device is available
-in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available
-at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
-
-Example g762 node:
-
-   clocks {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	g762_clk: fixedclk {
-		 compatible = "fixed-clock";
-		 #clock-cells = <0>;
-		 clock-frequency = <8192>;
-	}
-   }
-
-   g762: g762@3e {
-	compatible = "gmt,g762";
-	reg = <0x3e>;
-	clocks = <&g762_clk>
-	fan_gear_mode = <0>; /* chip default */
-	fan_startv = <1>;    /* chip default */
-	pwm_polarity = <0>;  /* chip default */
-   };
diff --git a/dts/upstream/Bindings/hwmon/gmt,g762.yaml b/dts/upstream/Bindings/hwmon/gmt,g762.yaml
new file mode 100644
index 00000000000..8e1bffd252e
--- /dev/null
+++ b/dts/upstream/Bindings/hwmon/gmt,g762.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/gmt,g762.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GMT G761/G762/G763 PWM Fan controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+  GMT G761/G762/G763 PWM Fan controller.
+
+  G761 supports an internal-clock hence the clocks property is optional.
+  If not defined, internal-clock will be used. (31KHz is the clock of
+  the internal crystal oscillator)
+
+  If an optional property is not set in DT, then current value is kept
+  unmodified (e.g. bootloader installed value).
+
+  Additional information on operational parameters for the device is available
+  in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available
+  at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
+
+properties:
+  compatible:
+    enum:
+      - gmt,g761
+      - gmt,g762
+      - gmt,g763
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: a fixed clock providing input clock frequency on CLK
+      pin of the chip.
+    maxItems: 1
+
+  fan_startv:
+    description: Fan startup voltage step
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  pwm_polarity:
+    description: PWM polarity (positive or negative duty)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  fan_gear_mode:
+    description: FAN gear mode. Configure High speed fan setting factor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - gmt,g762
+          - gmt,g763
+then:
+  required:
+    - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        g762@3e {
+            compatible = "gmt,g762";
+            reg = <0x3e>;
+            clocks = <&g762_clk>;
+            fan_gear_mode = <0>;
+            fan_startv = <1>;
+            pwm_polarity = <0>;
+        };
+
+        g761@1e {
+            compatible = "gmt,g761";
+            reg = <0x1e>;
+            fan_gear_mode = <0>;
+            fan_startv = <1>;
+            pwm_polarity = <0>;
+        };
+    };
diff --git a/dts/upstream/Bindings/hwmon/maxim,max6639.yaml b/dts/upstream/Bindings/hwmon/maxim,max6639.yaml
new file mode 100644
index 00000000000..4f5837a3077
--- /dev/null
+++ b/dts/upstream/Bindings/hwmon/maxim,max6639.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max6639.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim max6639
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+
+description: |
+  The MAX6639 is a 2-channel temperature monitor with dual, automatic, PWM
+  fan-speed controller.  It monitors its own temperature and one external
+  diode-connected transistor or the temperatures of two external diode-connected
+  transistors, typically available in CPUs, FPGAs, or GPUs.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max6639
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#pwm-cells':
+    const: 3
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^fan@[0-1]$":
+    type: object
+    description:
+      Represents the two fans and their specific configuration.
+
+    $ref: fan-common.yaml#
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          The fan number.
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan1: fan-controller@10 {
+            compatible = "maxim,max6639";
+            reg = <0x10>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #pwm-cells = <3>;
+
+            fan@0 {
+                reg = <0x0>;
+                pulses-per-revolution = <2>;
+                max-rpm = <4000>;
+                target-rpm = <1000>;
+                pwms = <&fan1 0 25000 0>;
+            };
+
+            fan@1 {
+                reg = <0x1>;
+                pulses-per-revolution = <2>;
+                max-rpm = <8000>;
+                pwms = <&fan1 1 25000 0>;
+            };
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/hwmon/ti,ina2xx.yaml b/dts/upstream/Bindings/hwmon/ti,ina2xx.yaml
index df86c2c9203..6ae961732e6 100644
--- a/dts/upstream/Bindings/hwmon/ti,ina2xx.yaml
+++ b/dts/upstream/Bindings/hwmon/ti,ina2xx.yaml
@@ -66,6 +66,14 @@ properties:
     description: phandle to the regulator that provides the VS supply typically
       in range from 2.7 V to 5.5 V.
 
+  ti,alert-polarity-active-high:
+    description: Alert pin is asserted based on the value of Alert polarity Bit
+      of Mask/Enable register. Default value is Normal (0 which maps to
+      active-low open collector). The other value is Inverted
+      (1 which maps to active-high open collector). Specify this property to set
+      the alert polarity to active-high.
+    $ref: /schemas/types.yaml#/definitions/flag
+
 required:
   - compatible
   - reg
@@ -88,5 +96,6 @@ examples:
             label = "vdd_3v0";
             shunt-resistor = <1000>;
             vs-supply = <&vdd_3v0>;
+            ti,alert-polarity-active-high;
         };
     };
diff --git a/dts/upstream/Bindings/hwmon/ti,tmp108.yaml b/dts/upstream/Bindings/hwmon/ti,tmp108.yaml
index 8b5307c875f..0ad10d43fac 100644
--- a/dts/upstream/Bindings/hwmon/ti,tmp108.yaml
+++ b/dts/upstream/Bindings/hwmon/ti,tmp108.yaml
@@ -9,6 +9,14 @@ title: TMP108 temperature sensor
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
 
+description: |
+  The TMP108 is a digital-output temperature sensor with a
+  dynamically-programmable limit window, and under- and overtemperature
+  alert functions.
+
+  Datasheets:
+    https://www.ti.com/product/TMP108
+
 properties:
   compatible:
     enum:
@@ -24,6 +32,9 @@ properties:
   "#thermal-sensor-cells":
     const: 0
 
+  vcc-supply:
+    description: phandle to the regulator that provides the V+ supply
+
 required:
   - compatible
   - reg
@@ -45,6 +56,7 @@ examples:
             interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
             pinctrl-names = "default";
             pinctrl-0 = <&tmp_alrt>;
+            vcc-supply = <&supply>;
             #thermal-sensor-cells = <0>;
         };
     };
diff --git a/dts/upstream/Bindings/i2c/amlogic,meson6-i2c.yaml b/dts/upstream/Bindings/i2c/amlogic,meson6-i2c.yaml
index 26bed558c6b..c4cc8af1828 100644
--- a/dts/upstream/Bindings/i2c/amlogic,meson6-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/amlogic,meson6-i2c.yaml
@@ -30,6 +30,9 @@ properties:
   clocks:
     minItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/i2c/atmel,at91sam-i2c.yaml b/dts/upstream/Bindings/i2c/atmel,at91sam-i2c.yaml
index b2d19cfb87a..e61cdb5b16e 100644
--- a/dts/upstream/Bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/atmel,at91sam-i2c.yaml
@@ -26,6 +26,7 @@ properties:
               - microchip,sam9x60-i2c
       - items:
           - enum:
+              - microchip,sama7d65-i2c
               - microchip,sama7g5-i2c
               - microchip,sam9x7-i2c
           - const: microchip,sam9x60-i2c
@@ -36,12 +37,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
   clocks:
     maxItems: 1
 
@@ -72,8 +67,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - "#address-cells"
-  - "#size-cells"
   - clocks
 
 allOf:
@@ -86,6 +79,7 @@ allOf:
               - atmel,sama5d4-i2c
               - atmel,sama5d2-i2c
               - microchip,sam9x60-i2c
+              - microchip,sama7d65-i2c
               - microchip,sama7g5-i2c
     then:
       properties:
diff --git a/dts/upstream/Bindings/i2c/brcm,brcmstb-i2c.yaml b/dts/upstream/Bindings/i2c/brcm,brcmstb-i2c.yaml
index 7070c04469e..ac9ddf228c8 100644
--- a/dts/upstream/Bindings/i2c/brcm,brcmstb-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -76,21 +76,21 @@ else:
 
 examples:
   - |
-      bsca: i2c@f0406200 {
-          clock-frequency = <390000>;
-          compatible = "brcm,brcmstb-i2c";
-          interrupt-parent = <&irq0_intc>;
-          reg = <0xf0406200 0x58>;
-          interrupts = <0x18>;
-          interrupt-names = "upg_bsca";
-      };
+    bsca: i2c@f0406200 {
+        compatible = "brcm,brcmstb-i2c";
+        reg = <0xf0406200 0x58>;
+        clock-frequency = <390000>;
+        interrupt-parent = <&irq0_intc>;
+        interrupts = <0x18>;
+        interrupt-names = "upg_bsca";
+    };
 
   - |
-      ddc0: i2c@7ef04500 {
-          compatible = "brcm,bcm2711-hdmi-i2c";
-          reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
-          reg-names = "bsc", "auto-i2c";
-          clock-frequency = <390000>;
-      };
+    ddc0: i2c@7ef04500 {
+        compatible = "brcm,bcm2711-hdmi-i2c";
+        reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+        reg-names = "bsc", "auto-i2c";
+        clock-frequency = <390000>;
+    };
 
 ...
diff --git a/dts/upstream/Bindings/i2c/i2c-demux-pinctrl.yaml b/dts/upstream/Bindings/i2c/i2c-demux-pinctrl.yaml
index b813f6d4810..1eaf00b90a7 100644
--- a/dts/upstream/Bindings/i2c/i2c-demux-pinctrl.yaml
+++ b/dts/upstream/Bindings/i2c/i2c-demux-pinctrl.yaml
@@ -109,65 +109,65 @@ examples:
     // Example for a bus to be demuxed.  It contains various I2C clients for
     // HDMI, so the bus is named "i2c-hdmi":
     i2chdmi: i2c-mux3 {
-            compatible = "i2c-demux-pinctrl";
-            i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
-            i2c-bus-name = "i2c-hdmi";
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            ak4643: codec@12 {
-                    compatible = "asahi-kasei,ak4643";
-                    #sound-dai-cells = <0>;
-                    reg = <0x12>;
-            };
-
-            composite-in@20 {
-                    compatible = "adi,adv7180";
-                    reg = <0x20>;
+        compatible = "i2c-demux-pinctrl";
+        i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+        i2c-bus-name = "i2c-hdmi";
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-                    port {
-                            adv7180: endpoint {
-                                    bus-width = <8>;
-                                    remote-endpoint = <&vin1ep0>;
-                            };
-                    };
+        ak4643: codec@12 {
+            compatible = "asahi-kasei,ak4643";
+            #sound-dai-cells = <0>;
+            reg = <0x12>;
+        };
+
+        composite-in@20 {
+            compatible = "adi,adv7180";
+            reg = <0x20>;
+
+            port {
+                adv7180: endpoint {
+                    bus-width = <8>;
+                    remote-endpoint = <&vin1ep0>;
+                };
             };
+        };
+
+        hdmi@39 {
+            compatible = "adi,adv7511w";
+            reg = <0x39>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&cec_clock>;
+            clock-names = "cec";
+
+            avdd-supply = <&fixedregulator1v8>;
+            dvdd-supply = <&fixedregulator1v8>;
+            pvdd-supply = <&fixedregulator1v8>;
+            dvdd-3v-supply = <&fixedregulator3v3>;
+            bgvdd-supply = <&fixedregulator1v8>;
+
+            adi,input-depth = <8>;
+            adi,input-colorspace = "rgb";
+            adi,input-clock = "1x";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    adv7511_in: endpoint {
+                        remote-endpoint = <&lvds0_out>;
+                    };
+                };
 
-            hdmi@39 {
-                    compatible = "adi,adv7511w";
-                    reg = <0x39>;
-                    interrupt-parent = <&gpio1>;
-                    interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-                    clocks = <&cec_clock>;
-                    clock-names = "cec";
-
-                    avdd-supply = <&fixedregulator1v8>;
-                    dvdd-supply = <&fixedregulator1v8>;
-                    pvdd-supply = <&fixedregulator1v8>;
-                    dvdd-3v-supply = <&fixedregulator3v3>;
-                    bgvdd-supply = <&fixedregulator1v8>;
-
-                    adi,input-depth = <8>;
-                    adi,input-colorspace = "rgb";
-                    adi,input-clock = "1x";
-
-                    ports {
-                            #address-cells = <1>;
-                            #size-cells = <0>;
-
-                            port@0 {
-                                    reg = <0>;
-                                    adv7511_in: endpoint {
-                                            remote-endpoint = <&lvds0_out>;
-                                    };
-                            };
-
-                            port@1 {
-                                    reg = <1>;
-                                    adv7511_out: endpoint {
-                                            remote-endpoint = <&hdmi_con_out>;
-                                    };
-                            };
+                port@1 {
+                    reg = <1>;
+                    adv7511_out: endpoint {
+                        remote-endpoint = <&hdmi_con_out>;
                     };
+                };
             };
+        };
     };
diff --git a/dts/upstream/Bindings/i2c/i2c-fsi.txt b/dts/upstream/Bindings/i2c/i2c-fsi.txt
deleted file mode 100644
index b1be2ceb7e6..00000000000
--- a/dts/upstream/Bindings/i2c/i2c-fsi.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Device-tree bindings for FSI-attached I2C master and busses
------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,i2c-fsi";
- - reg = < address size >;		: The FSI CFAM address and address
-					  space size.
- - #address-cells = <1>;		: Number of address cells in child
-					  nodes.
- - #size-cells = <0>;			: Number of size cells in child nodes.
- - child nodes				: Nodes to describe busses off the I2C
-					  master.
-
-Child node required properties:
- - reg = < port number >		: The port number on the I2C master.
-
-Child node optional properties:
- - child nodes				: Nodes to describe devices on the I2C
-					  bus.
-
-Examples:
-
-    i2c@1800 {
-        compatible = "ibm,i2c-fsi";
-        reg = < 0x1800 0x400 >;
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        i2c-bus@0 {
-            reg = <0>;
-        };
-
-        i2c-bus@1 {
-            reg = <1>;
-
-            eeprom@50 {
-                compatible = "vendor,dev-name";
-            };
-        };
-    };
diff --git a/dts/upstream/Bindings/i2c/i2c-imx-lpi2c.yaml b/dts/upstream/Bindings/i2c/i2c-imx-lpi2c.yaml
index 54d500be6aa..1dcb9c78de3 100644
--- a/dts/upstream/Bindings/i2c/i2c-imx-lpi2c.yaml
+++ b/dts/upstream/Bindings/i2c/i2c-imx-lpi2c.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale Low Power Inter IC (LPI2C) for i.MX
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
diff --git a/dts/upstream/Bindings/i2c/i2c-lpc2k.txt b/dts/upstream/Bindings/i2c/i2c-lpc2k.txt
deleted file mode 100644
index 4101aa621ad..00000000000
--- a/dts/upstream/Bindings/i2c/i2c-lpc2k.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-NXP I2C controller for LPC2xxx/178x/18xx/43xx
-
-Required properties:
- - compatible: must be "nxp,lpc1788-i2c"
- - reg: physical address and length of the device registers
- - interrupts: a single interrupt specifier
- - clocks: clock for the device
- - #address-cells: should be <1>
- - #size-cells: should be <0>
-
-Optional properties:
-- clock-frequency: the desired I2C bus clock frequency in Hz; in
-  absence of this property the default value is used (100 kHz).
-
-Example:
-i2c0: i2c@400a1000 {
-	compatible = "nxp,lpc1788-i2c";
-	reg = <0x400a1000 0x1000>;
-	interrupts = <18>;
-	clocks = <&ccu1 CLK_APB1_I2C0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-
-	lm75@48 {
-		compatible = "nxp,lm75";
-		reg = <0x48>;
-	};
-};
-
diff --git a/dts/upstream/Bindings/i2c/i2c-mux-gpio.yaml b/dts/upstream/Bindings/i2c/i2c-mux-gpio.yaml
index f34cc7ad5a0..4a93d1f78f9 100644
--- a/dts/upstream/Bindings/i2c/i2c-mux-gpio.yaml
+++ b/dts/upstream/Bindings/i2c/i2c-mux-gpio.yaml
@@ -57,6 +57,9 @@ properties:
       last value used.
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  settle-time-us:
+    description: Delay to wait before doing any transfer when a new bus gets selected.
+
 allOf:
   - $ref: i2c-mux.yaml
 
diff --git a/dts/upstream/Bindings/i2c/ibm,i2c-fsi.yaml b/dts/upstream/Bindings/i2c/ibm,i2c-fsi.yaml
new file mode 100644
index 00000000000..40ea82942e4
--- /dev/null
+++ b/dts/upstream/Bindings/i2c/ibm,i2c-fsi.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ibm,i2c-fsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached I2C controller
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  This I2C controller is an FSI CFAM engine, providing access to a number of
+  I2C busses. Therefore this node will always be a child of an FSI CFAM node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,i2c-fsi
+
+  reg:
+    items:
+      - description: FSI slave address
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^i2c-bus@[0-9a-f]+$":
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+    allOf:
+      - $ref: /schemas/i2c/i2c-controller.yaml#
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@1800 {
+        compatible = "ibm,i2c-fsi";
+        reg = <0x1800 0x400>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-bus@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        i2c-bus@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eeprom@50 {
+                compatible = "atmel,24c64";
+                reg = <0x50>;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/i2c/nvidia,tegra20-i2c.yaml b/dts/upstream/Bindings/i2c/nvidia,tegra20-i2c.yaml
index 424a4fc218b..92fbc1a2671 100644
--- a/dts/upstream/Bindings/i2c/nvidia,tegra20-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -87,12 +87,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  '#address-cells':
-    const: 1
-
-  '#size-cells':
-    const: 0
-
   clocks:
     minItems: 1
     maxItems: 2
diff --git a/dts/upstream/Bindings/i2c/nxp,lpc1788-i2c.yaml b/dts/upstream/Bindings/i2c/nxp,lpc1788-i2c.yaml
new file mode 100644
index 00000000000..9a1b95c2d03
--- /dev/null
+++ b/dts/upstream/Bindings/i2c/nxp,lpc1788-i2c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,lpc1788-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP I2C controller for LPC2xxx/178x/18xx/43xx
+
+maintainers:
+  - Vladimir Zapolskiy <vz@mleia.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: nxp,lpc1788-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: the desired I2C bus clock frequency in Hz
+    default: 100000
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/lpc18xx-ccu.h"
+
+    i2c@400a1000 {
+        compatible = "nxp,lpc1788-i2c";
+        reg = <0x400a1000 0x1000>;
+        interrupts = <18>;
+        clocks = <&ccu1 CLK_APB1_I2C0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/dts/upstream/Bindings/i2c/qcom,i2c-cci.yaml b/dts/upstream/Bindings/i2c/qcom,i2c-cci.yaml
index daf4e71b8e7..c33ae7b63b8 100644
--- a/dts/upstream/Bindings/i2c/qcom,i2c-cci.yaml
+++ b/dts/upstream/Bindings/i2c/qcom,i2c-cci.yaml
@@ -31,6 +31,8 @@ properties:
               - qcom,sm6350-cci
               - qcom,sm8250-cci
               - qcom,sm8450-cci
+              - qcom,sm8550-cci
+              - qcom,sm8650-cci
           - const: qcom,msm8996-cci # CCI v2
 
   "#address-cells":
@@ -195,6 +197,24 @@ allOf:
             - const: cpas_ahb
             - const: cci
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-cci
+              - qcom,sm8650-cci
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: cpas_ahb
+            - const: cci
+
 additionalProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/i2c/renesas,iic-emev2.yaml b/dts/upstream/Bindings/i2c/renesas,iic-emev2.yaml
index 17c1102562b..551cfa6f885 100644
--- a/dts/upstream/Bindings/i2c/renesas,iic-emev2.yaml
+++ b/dts/upstream/Bindings/i2c/renesas,iic-emev2.yaml
@@ -44,11 +44,11 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     iic0: i2c@e0070000 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            compatible = "renesas,iic-emev2";
-            reg = <0xe0070000 0x28>;
-            interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
-            clocks = <&iic0_sclk>;
-            clock-names = "sclk";
+        compatible = "renesas,iic-emev2";
+        reg = <0xe0070000 0x28>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&iic0_sclk>;
+        clock-names = "sclk";
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/dts/upstream/Bindings/i2c/renesas,rcar-i2c.yaml b/dts/upstream/Bindings/i2c/renesas,rcar-i2c.yaml
index 51b220da461..6cc60c3f61c 100644
--- a/dts/upstream/Bindings/i2c/renesas,rcar-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/renesas,rcar-i2c.yaml
@@ -153,14 +153,14 @@ examples:
     #include <dt-bindings/power/r8a7791-sysc.h>
 
     i2c0: i2c@e6508000 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
-            reg = <0xe6508000 0x40>;
-            interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-            clock-frequency = <400000>;
-            clocks = <&cpg CPG_MOD 931>;
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-            resets = <&cpg 931>;
-            i2c-scl-internal-delay-ns = <6>;
+        compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
+        reg = <0xe6508000 0x40>;
+        interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+        clock-frequency = <400000>;
+        clocks = <&cpg CPG_MOD 931>;
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 931>;
+        i2c-scl-internal-delay-ns = <6>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/dts/upstream/Bindings/i2c/renesas,riic.yaml b/dts/upstream/Bindings/i2c/renesas,riic.yaml
index 91ecf17b7a8..7993fe463c4 100644
--- a/dts/upstream/Bindings/i2c/renesas,riic.yaml
+++ b/dts/upstream/Bindings/i2c/renesas,riic.yaml
@@ -97,21 +97,21 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     i2c0: i2c@fcfee000 {
-            compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-            reg = <0xfcfee000 0x44>;
-            interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
-                         <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
-                         <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
-                              "tmoi";
-            clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
-            clock-frequency = <100000>;
-            power-domains = <&cpg_clocks>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+        reg = <0xfcfee000 0x44>;
+        interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
+                          "tmoi";
+        clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+        clock-frequency = <100000>;
+        power-domains = <&cpg_clocks>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/dts/upstream/Bindings/i2c/renesas,rmobile-iic.yaml b/dts/upstream/Bindings/i2c/renesas,rmobile-iic.yaml
index 04e4ffd80bc..ec5222a1224 100644
--- a/dts/upstream/Bindings/i2c/renesas,rmobile-iic.yaml
+++ b/dts/upstream/Bindings/i2c/renesas,rmobile-iic.yaml
@@ -134,16 +134,16 @@ examples:
     #include <dt-bindings/power/r8a7790-sysc.h>
 
     iic0: i2c@e6500000 {
-            compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
-                         "renesas,rmobile-iic";
-            reg = <0xe6500000 0x425>;
-            interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 318>;
-            clock-frequency = <400000>;
-            dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-            resets = <&cpg 318>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+                     "renesas,rmobile-iic";
+        reg = <0xe6500000 0x425>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 318>;
+        clock-frequency = <400000>;
+        dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 318>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/dts/upstream/Bindings/i2c/samsung,s3c2410-i2c.yaml b/dts/upstream/Bindings/i2c/samsung,s3c2410-i2c.yaml
index 1303502cf26..bbc56848562 100644
--- a/dts/upstream/Bindings/i2c/samsung,s3c2410-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -26,9 +26,6 @@ properties:
               - samsung,exynos850-i2c
           - const: samsung,s3c2440-i2c
 
-  '#address-cells':
-    const: 1
-
   clocks:
     maxItems: 1
 
@@ -73,9 +70,6 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: Pandle to syscon used to control the system registers.
 
-  '#size-cells':
-    const: 0
-
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/i2c/snps,designware-i2c.yaml b/dts/upstream/Bindings/i2c/snps,designware-i2c.yaml
index d9293c57f57..60035a787e5 100644
--- a/dts/upstream/Bindings/i2c/snps,designware-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/snps,designware-i2c.yaml
@@ -33,6 +33,10 @@ properties:
           - const: snps,designware-i2c
       - description: Baikal-T1 SoC System I2C controller
         const: baikal,bt1-sys-i2c
+      - description: T-HEAD TH1520 SoCs I2C controller
+        items:
+          - const: thead,th1520-i2c
+          - const: snps,designware-i2c
 
   reg:
     minItems: 1
diff --git a/dts/upstream/Bindings/i2c/st,stm32-i2c.yaml b/dts/upstream/Bindings/i2c/st,stm32-i2c.yaml
index 8fd8be76875..457bb0702ed 100644
--- a/dts/upstream/Bindings/i2c/st,stm32-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/st,stm32-i2c.yaml
@@ -145,31 +145,31 @@ examples:
     #include <dt-bindings/mfd/stm32f7-rcc.h>
     #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 1 (with st,stm32f4-i2c compatible)
-      i2c@40005400 {
-          compatible = "st,stm32f4-i2c";
-          #address-cells = <1>;
-          #size-cells = <0>;
-          reg = <0x40005400 0x400>;
-          interrupts = <31>,
-                       <32>;
-          resets = <&rcc 277>;
-          clocks = <&rcc 0 149>;
-      };
+    i2c@40005400 {
+        compatible = "st,stm32f4-i2c";
+        reg = <0x40005400 0x400>;
+        interrupts = <31>,
+                     <32>;
+        resets = <&rcc 277>;
+        clocks = <&rcc 0 149>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
 
   - |
     #include <dt-bindings/mfd/stm32f7-rcc.h>
     #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 2 (with st,stm32f7-i2c compatible)
-      i2c@40005800 {
-          compatible = "st,stm32f7-i2c";
-          #address-cells = <1>;
-          #size-cells = <0>;
-          reg = <0x40005800 0x400>;
-          interrupts = <31>,
-                       <32>;
-          resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
-          clocks = <&rcc 1 CLK_I2C1>;
-      };
+    i2c@40005800 {
+        compatible = "st,stm32f7-i2c";
+        reg = <0x40005800 0x400>;
+        interrupts = <31>,
+                     <32>;
+        resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+        clocks = <&rcc 1 CLK_I2C1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
 
   - |
     #include <dt-bindings/mfd/stm32f7-rcc.h>
@@ -178,16 +178,16 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
-      i2c@40013000 {
-          compatible = "st,stm32mp15-i2c";
-          #address-cells = <1>;
-          #size-cells = <0>;
-          reg = <0x40013000 0x400>;
-          interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-                       <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-          clocks = <&rcc I2C2_K>;
-          resets = <&rcc I2C2_R>;
-          i2c-scl-rising-time-ns = <185>;
-          i2c-scl-falling-time-ns = <20>;
-          st,syscfg-fmp = <&syscfg 0x4 0x2>;
-      };
+    i2c@40013000 {
+        compatible = "st,stm32mp15-i2c";
+        reg = <0x40013000 0x400>;
+        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc I2C2_K>;
+        resets = <&rcc I2C2_R>;
+        i2c-scl-rising-time-ns = <185>;
+        i2c-scl-falling-time-ns = <20>;
+        st,syscfg-fmp = <&syscfg 0x4 0x2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/dts/upstream/Bindings/i2c/ti,omap4-i2c.yaml b/dts/upstream/Bindings/i2c/ti,omap4-i2c.yaml
index 781108ae1ce..8c2e35fabf5 100644
--- a/dts/upstream/Bindings/i2c/ti,omap4-i2c.yaml
+++ b/dts/upstream/Bindings/i2c/ti,omap4-i2c.yaml
@@ -37,16 +37,8 @@ properties:
   clock-names:
     const: fck
 
-  clock-frequency: true
-
   power-domains: true
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
   ti,hwmods:
     description:
       Must be "i2c<n>", n being the instance number (1-based).
@@ -55,38 +47,34 @@ properties:
     $ref: /schemas/types.yaml#/definitions/string
     deprecated: true
 
-# subnode's properties
-patternProperties:
-  "@[0-9a-f]+$":
-    type: object
-    description:
-      Flash device uses the below defined properties in the subnode.
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,omap2420-i2c
+            - ti,omap2430-i2c
+            - ti,omap3-i2c
+            - ti,omap4-i2c
 
-if:
-  properties:
-    compatible:
-      enum:
-        - ti,omap2420-i2c
-        - ti,omap2430-i2c
-        - ti,omap3-i2c
-        - ti,omap4-i2c
+    then:
+      properties:
+        ti,hwmods:
+          items:
+            - pattern: "^i2c([1-9])$"
 
-then:
-  properties:
-    ti,hwmods:
-      items:
-        - pattern: "^i2c([1-9])$"
+    else:
+      properties:
+        ti,hwmods: false
 
-else:
-  properties:
-    ti,hwmods: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -94,9 +82,9 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     main_i2c0: i2c@2000000 {
-            compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-            reg = <0x2000000 0x100>;
-            interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-            #address-cells = <1>;
-            #size-cells = <0>;
-         };
+        compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+        reg = <0x2000000 0x100>;
+        interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/dts/upstream/Bindings/i3c/i3c.yaml b/dts/upstream/Bindings/i3c/i3c.yaml
index 113957ebe9f..e25fa72fd78 100644
--- a/dts/upstream/Bindings/i3c/i3c.yaml
+++ b/dts/upstream/Bindings/i3c/i3c.yaml
@@ -91,6 +91,7 @@ patternProperties:
               - const: 0
               - description: |
                   Shall encode the I3C LVR (Legacy Virtual Register):
+                  See include/dt-bindings/i3c/i3c.h
                     bit[31:8]: unused/ignored
                     bit[7:5]: I2C device index. Possible values:
                       * 0: I2C device has a 50 ns spike filter
@@ -153,6 +154,8 @@ additionalProperties: true
 
 examples:
   - |
+    #include <dt-bindings/i3c/i3c.h>
+
     i3c@d040000 {
         compatible = "cdns,i3c-master";
         clocks = <&coreclock>, <&i3csysclock>;
@@ -166,7 +169,7 @@ examples:
         /* I2C device. */
         eeprom@57 {
             compatible = "atmel,24c01";
-            reg = <0x57 0x0 0x10>;
+            reg = <0x57 0x0 (I2C_FM | I2C_FILTER)>;
             pagesize = <0x8>;
         };
 
diff --git a/dts/upstream/Bindings/i3c/snps,dw-i3c-master.yaml b/dts/upstream/Bindings/i3c/snps,dw-i3c-master.yaml
index c0e805e531b..4fc13e3c0f7 100644
--- a/dts/upstream/Bindings/i3c/snps,dw-i3c-master.yaml
+++ b/dts/upstream/Bindings/i3c/snps,dw-i3c-master.yaml
@@ -20,7 +20,16 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Core clock
+      - description: APB clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: apb
 
   interrupts:
     maxItems: 1
diff --git a/dts/upstream/Bindings/iio/adc/adc.yaml b/dts/upstream/Bindings/iio/adc/adc.yaml
index 36775f8f71d..8e7835cf36f 100644
--- a/dts/upstream/Bindings/iio/adc/adc.yaml
+++ b/dts/upstream/Bindings/iio/adc/adc.yaml
@@ -38,6 +38,25 @@ properties:
       The first value specifies the positive input pin, the second
       specifies the negative input pin.
 
+  single-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When devices combine single-ended and differential channels, allow the
+      channel for a single element to be specified, independent of reg (as for
+      differential channels). If this and diff-channels are not present reg
+      shall be used instead.
+
+  common-mode-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Some ADCs have differential input pins that can be used to measure
+      single-ended or pseudo-differential inputs. This property can be used
+      in addition to single-channel to signal software that this channel is
+      not differential but still specify two inputs.
+
+      The input pair is specified by setting single-channel to the positive
+      input pin and common-mode-channel to the negative pin.
+
   settling-time-us:
     description:
       Time between enabling the channel and first stable readings.
@@ -50,4 +69,15 @@ properties:
       device design and can interact with other characteristics such as
       settling time.
 
+anyOf:
+  - oneOf:
+      - required:
+          - reg
+          - diff-channels
+      - required:
+          - reg
+          - single-channel
+  - required:
+      - reg
+
 additionalProperties: true
diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7173.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7173.yaml
index ea6cfcd0aff..17c5d39cc2c 100644
--- a/dts/upstream/Bindings/iio/adc/adi,ad7173.yaml
+++ b/dts/upstream/Bindings/iio/adc/adi,ad7173.yaml
@@ -19,7 +19,18 @@ description: |
   primarily for measurement of signals close to DC but also delivers
   outstanding performance with input bandwidths out to ~10kHz.
 
+  Analog Devices AD411x ADC's:
+  The AD411X family encompasses a series of low power, low noise, 24-bit,
+  sigma-delta analog-to-digital converters that offer a versatile range of
+  specifications. They integrate an analog front end suitable for processing
+  fully differential/single-ended and bipolar voltage inputs.
+
   Datasheets for supported chips:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf
@@ -31,6 +42,11 @@ description: |
 properties:
   compatible:
     enum:
+      - adi,ad4111
+      - adi,ad4112
+      - adi,ad4114
+      - adi,ad4115
+      - adi,ad4116
       - adi,ad7172-2
       - adi,ad7172-4
       - adi,ad7173-8
@@ -129,10 +145,56 @@ patternProperties:
         maximum: 15
 
       diff-channels:
+        description: |
+          This property is used for defining the inputs of a differential
+          voltage channel. The first value is the positive input and the second
+          value is the negative input of the channel.
+
+          Family AD411x supports a dedicated VINCOM voltage input.
+          To select it set the second channel to 16.
+            (VIN2, VINCOM) -> diff-channels = <2 16>
+
+          There are special values that can be selected besides the voltage
+          analog inputs:
+            21: REF+
+            22: REF−
+
+          Supported only by AD7172-2, AD7172-4, AD7175-2, AD7175-8, AD7177-2,
+          must be paired together and can be used to monitor the power supply
+          of the ADC:
+            19: ((AVDD1 − AVSS)/5)+
+            20: ((AVDD1 − AVSS)/5)−
+
         items:
           minimum: 0
           maximum: 31
 
+      single-channel:
+        description: |
+          This property is used for defining a current channel or the positive
+          input of a voltage channel (single-ended or pseudo-differential).
+
+          Models AD4111 and AD4112 support current channels.
+            Example: (IIN2+, IIN2−) -> single-channel = <2>
+          To correctly configure a current channel set the "adi,current-channel"
+          property to true.
+
+          To configure a single-ended/pseudo-differential channel set the
+          "common-mode-channel" property to the desired negative voltage input.
+
+          When used as a voltage channel, special inputs are valid as well.
+        minimum: 0
+        maximum: 31
+
+      common-mode-channel:
+        description:
+          This property is used for defining the negative input of a
+          single-ended or pseudo-differential voltage channel.
+
+          Special inputs are valid as well.
+        minimum: 0
+        maximum: 31
+
       adi,reference-select:
         description: |
           Select the reference source to use when converting on
@@ -154,9 +216,31 @@ patternProperties:
           - avdd
         default: refout-avss
 
+      adi,current-channel:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: |
+          Signal that the selected inputs are current channels.
+          Only available on AD4111 and AD4112.
+
     required:
       - reg
-      - diff-channels
+
+    allOf:
+      - oneOf:
+          - required: [single-channel]
+            properties:
+              diff-channels: false
+          - required: [diff-channels]
+            properties:
+              single-channel: false
+              adi,current-channel: false
+              common-mode-channel: false
+
+      - if:
+          required: [common-mode-channel]
+        then:
+          properties:
+            adi,current-channel: false
 
 required:
   - compatible
@@ -166,7 +250,6 @@ allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
   # Only ad7172-4, ad7173-8 and ad7175-8 support vref2
-  # Other models have [0-3] channel registers
   - if:
       properties:
         compatible:
@@ -187,6 +270,37 @@ allOf:
                 - vref
                 - refout-avss
                 - avdd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4114
+              - adi,ad4115
+              - adi,ad4116
+              - adi,ad7173-8
+              - adi,ad7175-8
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 15
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7172-2
+              - adi,ad7175-2
+              - adi,ad7176-2
+              - adi,ad7177-2
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
             reg:
               maximum: 3
 
@@ -211,6 +325,34 @@ allOf:
             - adi,reference-select
 
   - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4111
+              - adi,ad4112
+              - adi,ad4114
+              - adi,ad4115
+              - adi,ad4116
+    then:
+      properties:
+        avdd2-supply: false
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - adi,ad4111
+                - adi,ad4112
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            adi,current-channel: false
+
+  - if:
       anyOf:
         - required: [clock-names]
         - required: [clocks]
@@ -221,6 +363,7 @@ allOf:
 unevaluatedProperties: false
 
 examples:
+  # Example AD7173-8 with external reference connected to REF+/REF-:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -277,3 +420,50 @@ examples:
         };
       };
     };
+
+  # Example AD4111 with current channel and single-ended channel:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+       adc@0 {
+        compatible = "adi,ad4111";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "rdy";
+        interrupt-parent = <&gpio>;
+        spi-max-frequency = <5000000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #clock-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          bipolar;
+          diff-channels = <4 5>;
+        };
+
+        // Single ended channel VIN2/VINCOM
+        channel@1 {
+          reg = <1>;
+          bipolar;
+          single-channel = <2>;
+          common-mode-channel = <16>;
+        };
+
+        // Current channel IN2+/IN2-
+        channel@2 {
+          reg = <2>;
+          single-channel = <2>;
+          adi,current-channel;
+        };
+      };
+    };
diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7192.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7192.yaml
index 16def2985ab..190889c7b62 100644
--- a/dts/upstream/Bindings/iio/adc/adi,ad7192.yaml
+++ b/dts/upstream/Bindings/iio/adc/adi,ad7192.yaml
@@ -21,8 +21,15 @@ properties:
       - adi,ad7190
       - adi,ad7192
       - adi,ad7193
+      - adi,ad7194
       - adi,ad7195
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
   reg:
     maxItems: 1
 
@@ -41,6 +48,11 @@ properties:
   interrupts:
     maxItems: 1
 
+  aincom-supply:
+    description: |
+      AINCOM voltage supply. Analog inputs AINx are referenced to this input
+      when configured for pseudo-differential operation.
+
   dvdd-supply:
     description: DVdd voltage supply
 
@@ -84,6 +96,41 @@ properties:
     description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
     type: boolean
 
+patternProperties:
+  "^channel@[0-9a-f]+$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The channel index.
+        minimum: 0
+        maximum: 271
+
+      diff-channels:
+        description:
+          Both inputs can be connected to pins AIN1 to AIN16 by choosing the
+          appropriate value from 1 to 16.
+        items:
+          minimum: 1
+          maximum: 16
+
+      single-channel:
+        description:
+          Positive input can be connected to pins AIN1 to AIN16 by choosing the
+          appropriate value from 1 to 16. Negative input is connected to AINCOM.
+        minimum: 1
+        maximum: 16
+
+    oneOf:
+      - required:
+          - reg
+          - diff-channels
+      - required:
+          - reg
+          - single-channel
+
 required:
   - compatible
   - reg
@@ -98,6 +145,17 @@ required:
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7190
+            - adi,ad7192
+            - adi,ad7193
+            - adi,ad7195
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]+$": false
 
 unevaluatedProperties: false
 
@@ -117,6 +175,7 @@ examples:
             clock-names = "mclk";
             interrupts = <25 0x2>;
             interrupt-parent = <&gpio>;
+            aincom-supply = <&aincom>;
             dvdd-supply = <&dvdd>;
             avdd-supply = <&avdd>;
             vref-supply = <&vref>;
@@ -127,3 +186,38 @@ examples:
             adi,burnout-currents-enable;
         };
     };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7194";
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+            clocks = <&ad7192_mclk>;
+            clock-names = "mclk";
+            interrupts = <25 0x2>;
+            interrupt-parent = <&gpio>;
+            aincom-supply = <&aincom>;
+            dvdd-supply = <&dvdd>;
+            avdd-supply = <&avdd>;
+            vref-supply = <&vref>;
+
+            channel@0 {
+                reg = <0>;
+                diff-channels = <1 6>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                single-channel = <1>;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7380.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7380.yaml
new file mode 100644
index 00000000000..899b777017c
--- /dev/null
+++ b/dts/upstream/Bindings/iio/adc/adi,ad7380.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Simultaneous Sampling Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  * https://www.analog.com/en/products/ad7380.html
+  * https://www.analog.com/en/products/ad7381.html
+  * https://www.analog.com/en/products/ad7383.html
+  * https://www.analog.com/en/products/ad7384.html
+  * https://www.analog.com/en/products/ad7380-4.html
+  * https://www.analog.com/en/products/ad7381-4.html
+  * https://www.analog.com/en/products/ad7383-4.html
+  * https://www.analog.com/en/products/ad7384-4.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7380
+      - adi,ad7381
+      - adi,ad7383
+      - adi,ad7384
+      - adi,ad7380-4
+      - adi,ad7381-4
+      - adi,ad7383-4
+      - adi,ad7384-4
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 80000000
+  spi-cpol: true
+  spi-cpha: true
+
+  vcc-supply:
+    description: A 3V to 3.6V supply that powers the chip.
+
+  vlogic-supply:
+    description:
+      A 1.65V to 3.6V supply for the logic pins.
+
+  refio-supply:
+    description:
+      A 2.5V to 3.3V supply for the external reference voltage. When omitted,
+      the internal 2.5V reference is used.
+
+  aina-supply:
+    description:
+      The common mode voltage supply for the AINA- pin on pseudo-differential
+      chips.
+
+  ainb-supply:
+    description:
+      The common mode voltage supply for the AINB- pin on pseudo-differential
+      chips.
+
+  ainc-supply:
+    description:
+      The common mode voltage supply for the AINC- pin on pseudo-differential
+      chips.
+
+  aind-supply:
+    description:
+      The common mode voltage supply for the AIND- pin on pseudo-differential
+      chips.
+
+  interrupts:
+    description:
+      When the device is using 1-wire mode, this property is used to optionally
+      specify the ALERT interrupt.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - vlogic-supply
+
+unevaluatedProperties: false
+
+allOf:
+  # pseudo-differential chips require common mode voltage supplies,
+  # true differential chips don't use them
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7383
+            - adi,ad7384
+            - adi,ad7383-4
+            - adi,ad7384-4
+    then:
+      required:
+        - aina-supply
+        - ainb-supply
+    else:
+      properties:
+        aina-supply: false
+        ainb-supply: false
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7383-4
+            - adi,ad7384-4
+    then:
+      required:
+        - ainc-supply
+        - aind-supply
+    else:
+      properties:
+        ainc-supply: false
+        aind-supply: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7380";
+            reg = <0>;
+
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <80000000>;
+
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            vcc-supply = <&supply_3_3V>;
+            vlogic-supply = <&supply_3_3V>;
+            refio-supply = <&supply_2_5V>;
+        };
+    };
diff --git a/dts/upstream/Bindings/iio/adc/adi,ad7606.yaml b/dts/upstream/Bindings/iio/adc/adi,ad7606.yaml
index 7fa46df1f4f..00fdaed11cb 100644
--- a/dts/upstream/Bindings/iio/adc/adi,ad7606.yaml
+++ b/dts/upstream/Bindings/iio/adc/adi,ad7606.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 description: |
   Analog Devices AD7606 Simultaneous Sampling ADC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7605-4.pdf
   https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
   https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
   https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf
@@ -19,9 +20,9 @@ properties:
   compatible:
     enum:
       - adi,ad7605-4
-      - adi,ad7606-8
-      - adi,ad7606-6
       - adi,ad7606-4
+      - adi,ad7606-6
+      - adi,ad7606-8  # Referred to as AD7606 (without -8) in the datasheet
       - adi,ad7606b
       - adi,ad7616
 
diff --git a/dts/upstream/Bindings/iio/adc/amlogic,meson-saradc.yaml b/dts/upstream/Bindings/iio/adc/amlogic,meson-saradc.yaml
index 7e8328e9ce1..f748f3a60b3 100644
--- a/dts/upstream/Bindings/iio/adc/amlogic,meson-saradc.yaml
+++ b/dts/upstream/Bindings/iio/adc/amlogic,meson-saradc.yaml
@@ -66,6 +66,9 @@ properties:
   nvmem-cell-names:
     const: temperature_calib
 
+  power-domains:
+    maxItems: 1
+
 allOf:
   - if:
       properties:
diff --git a/dts/upstream/Bindings/iio/adc/mediatek,mt6359-auxadc.yaml b/dts/upstream/Bindings/iio/adc/mediatek,mt6359-auxadc.yaml
new file mode 100644
index 00000000000..6497c416094
--- /dev/null
+++ b/dts/upstream/Bindings/iio/adc/mediatek,mt6359-auxadc.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt6359-auxadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6350 series PMIC AUXADC
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
+  in some MediaTek PMICs, performing various PMIC related measurements
+  such as battery and PMIC internal voltage regulators temperatures,
+  accessory detection resistance (usually, for a 3.5mm audio jack)
+  other than voltages for various PMIC internal components.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6357-auxadc
+      - mediatek,mt6358-auxadc
+      - mediatek,mt6359-auxadc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
diff --git a/dts/upstream/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/dts/upstream/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index c1b1324fa13..2722edab1d9 100644
--- a/dts/upstream/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/dts/upstream/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -246,6 +246,10 @@ patternProperties:
                     From common IIO binding. Used to pipe external sigma delta
                     modulator or internal ADC output to DFSDM channel.
 
+                port:
+                  $ref: /schemas/sound/audio-graph-port.yaml#
+                  unevaluatedProperties: false
+
               required:
                 - compatible
                 - "#sound-dai-cells"
diff --git a/dts/upstream/Bindings/iio/adc/ti,ads1015.yaml b/dts/upstream/Bindings/iio/adc/ti,ads1015.yaml
index d605999ffe2..718f633c6e0 100644
--- a/dts/upstream/Bindings/iio/adc/ti,ads1015.yaml
+++ b/dts/upstream/Bindings/iio/adc/ti,ads1015.yaml
@@ -18,6 +18,7 @@ properties:
     enum:
       - ti,ads1015
       - ti,ads1115
+      - ti,tla2021
       - ti,tla2024
 
   reg:
diff --git a/dts/upstream/Bindings/iio/adc/ti,ads1119.yaml b/dts/upstream/Bindings/iio/adc/ti,ads1119.yaml
new file mode 100644
index 00000000000..ba6850ab1f9
--- /dev/null
+++ b/dts/upstream/Bindings/iio/adc/ti,ads1119.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1119.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS1119 ADC
+
+maintainers:
+  - João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
+
+description:
+  The TI ADS1119 is a precision 16-bit ADC over I2C that offers single-ended and
+  differential measurements using a multiplexed input. It features a programmable
+  gain, a programmable sample rate, an internal oscillator and voltage reference,
+  and a 50/60Hz rejection filter.
+
+properties:
+  compatible:
+    const: ti,ads1119
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply: true
+  dvdd-supply: true
+
+  vref-supply:
+    description:
+      ADC external reference voltage (VREF).
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - avdd-supply
+  - dvdd-supply
+
+patternProperties:
+  "^channel@([0-6])$":
+    $ref: adc.yaml
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 6
+
+      diff-channels:
+        description:
+          Differential input channels AIN0-AIN1, AIN2-AIN3 and AIN1-AIN2.
+        oneOf:
+          - items:
+              - const: 0
+              - const: 1
+          - items:
+              - const: 2
+              - const: 3
+          - items:
+              - const: 1
+              - const: 2
+
+      single-channel:
+        description:
+          Single-ended input channels AIN0, AIN1, AIN2 and AIN3.
+        minimum: 0
+        maximum: 3
+
+    oneOf:
+      - required:
+          - diff-channels
+      - required:
+          - single-channel
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@40 {
+            compatible = "ti,ads1119";
+            reg = <0x40>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+            avdd-supply = <&reg_avdd_ads1119>;
+            dvdd-supply = <&reg_dvdd_ads1119>;
+            vref-supply = <&reg_vref_ads1119>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            channel@0 {
+                reg = <0>;
+                single-channel = <0>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <0 1>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                single-channel = <3>;
+            };
+
+            channel@3 {
+                reg = <3>;
+                single-channel = <1>;
+            };
+
+            channel@4 {
+                reg = <4>;
+                single-channel = <2>;
+            };
+
+            channel@5 {
+                reg = <5>;
+                diff-channels = <1 2>;
+            };
+
+            channel@6 {
+                reg = <6>;
+                diff-channels = <2 3>;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/iio/chemical/sciosense,ens160.yaml b/dts/upstream/Bindings/iio/chemical/sciosense,ens160.yaml
new file mode 100644
index 00000000000..267033a68ab
--- /dev/null
+++ b/dts/upstream/Bindings/iio/chemical/sciosense,ens160.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sciosense,ens160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ScioSense ENS160 multi-gas sensor
+
+maintainers:
+  - Gustavo Silva <gustavograzs@gmail.com>
+
+description: |
+  Digital Multi-Gas Sensor for Monitoring Indoor Air Quality.
+
+  Datasheet:
+    https://www.sciosense.com/wp-content/uploads/2023/12/ENS160-Datasheet.pdf
+
+properties:
+  compatible:
+    enum:
+      - sciosense,ens160
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gas-sensor@52 {
+        compatible = "sciosense,ens160";
+        reg = <0x52>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gas-sensor@0 {
+        compatible = "sciosense,ens160";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+      };
+    };
+
+...
diff --git a/dts/upstream/Bindings/iio/dac/adi,ad3552r.yaml b/dts/upstream/Bindings/iio/dac/adi,ad3552r.yaml
index 8265d709094..fc8b97f8207 100644
--- a/dts/upstream/Bindings/iio/dac/adi,ad3552r.yaml
+++ b/dts/upstream/Bindings/iio/dac/adi,ad3552r.yaml
@@ -13,13 +13,17 @@ maintainers:
 description: |
   Bindings for the Analog Devices AD3552R DAC device and similar.
   Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3541r.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3551r.pdf
     https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
 
 properties:
   compatible:
     enum:
+      - adi,ad3541r
       - adi,ad3542r
+      - adi,ad3551r
       - adi,ad3552r
 
   reg:
@@ -92,13 +96,13 @@ patternProperties:
             maximum: 511
             minimum: -511
 
-          adi,gain-scaling-p-inv-log2:
-            description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
+          adi,gain-scaling-p:
+            description: GainP = 1 / ( 2 ^ adi,gain-scaling-p)
             $ref: /schemas/types.yaml#/definitions/uint32
             enum: [0, 1, 2, 3]
 
-          adi,gain-scaling-n-inv-log2:
-            description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
+          adi,gain-scaling-n:
+            description: GainN = 1 / ( 2 ^ adi,gain-scaling-n)
             $ref: /schemas/types.yaml#/definitions/uint32
             enum: [0, 1, 2, 3]
 
@@ -107,8 +111,8 @@ patternProperties:
 
         required:
           - adi,gain-offset
-          - adi,gain-scaling-p-inv-log2
-          - adi,gain-scaling-n-inv-log2
+          - adi,gain-scaling-p
+          - adi,gain-scaling-n
           - adi,rfb-ohms
 
     required:
@@ -128,7 +132,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: adi,ad3542r
+            enum:
+              - adi,ad3541r
+              - adi,ad3542r
     then:
       patternProperties:
         "^channel@([0-1])$":
@@ -158,7 +164,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: adi,ad3552r
+            enum:
+              - adi,ad3551r
+              - adi,ad3552r
     then:
       patternProperties:
         "^channel@([0-1])$":
@@ -182,6 +190,21 @@ allOf:
                     - const: -10000000
                     - const: 10000000
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad3541r
+              - adi,ad3551r
+    then:
+      properties:
+        channel@1: false
+        channel@0:
+          properties:
+            reg:
+              const: 0
+
 required:
   - compatible
   - reg
@@ -208,8 +231,8 @@ examples:
                 reg = <1>;
                 custom-output-range-config {
                     adi,gain-offset = <5>;
-                    adi,gain-scaling-p-inv-log2 = <1>;
-                    adi,gain-scaling-n-inv-log2 = <2>;
+                    adi,gain-scaling-p = <1>;
+                    adi,gain-scaling-n = <2>;
                     adi,rfb-ohms = <1>;
                 };
             };
diff --git a/dts/upstream/Bindings/iio/frequency/adi,adf4350.yaml b/dts/upstream/Bindings/iio/frequency/adi,adf4350.yaml
index 43cbf27114c..d1d1311332f 100644
--- a/dts/upstream/Bindings/iio/frequency/adi,adf4350.yaml
+++ b/dts/upstream/Bindings/iio/frequency/adi,adf4350.yaml
@@ -28,6 +28,12 @@ properties:
   clock-names:
     const: clkin
 
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
   gpios:
     maxItems: 1
     description: Lock detect GPIO.
diff --git a/dts/upstream/Bindings/iio/imu/adi,adis16475.yaml b/dts/upstream/Bindings/iio/imu/adi,adis16475.yaml
index 9b7ad609f7d..9d185f7bfdc 100644
--- a/dts/upstream/Bindings/iio/imu/adi,adis16475.yaml
+++ b/dts/upstream/Bindings/iio/imu/adi,adis16475.yaml
@@ -30,12 +30,19 @@ properties:
       - adi,adis16467-2
       - adi,adis16467-3
       - adi,adis16500
+      - adi,adis16501
       - adi,adis16505-1
       - adi,adis16505-2
       - adi,adis16505-3
       - adi,adis16507-1
       - adi,adis16507-2
       - adi,adis16507-3
+      - adi,adis16575-2
+      - adi,adis16575-3
+      - adi,adis16576-2
+      - adi,adis16576-3
+      - adi,adis16577-2
+      - adi,adis16577-3
 
   reg:
     maxItems: 1
@@ -90,12 +97,19 @@ allOf:
           contains:
             enum:
               - adi,adis16500
+              - adi,adis16501
               - adi,adis16505-1
               - adi,adis16505-2
               - adi,adis16505-3
               - adi,adis16507-1
               - adi,adis16507-2
               - adi,adis16507-3
+              - adi,adis16575-2
+              - adi,adis16575-3
+              - adi,adis16576-2
+              - adi,adis16576-3
+              - adi,adis16577-2
+              - adi,adis16577-3
 
     then:
       properties:
@@ -112,6 +126,23 @@ allOf:
       dependencies:
         adi,sync-mode: [ clocks ]
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adis16575-2
+              - adi,adis16575-3
+              - adi,adis16576-2
+              - adi,adis16576-3
+              - adi,adis16577-2
+              - adi,adis16577-3
+
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 15000000
+
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/iio/imu/adi,adis16480.yaml b/dts/upstream/Bindings/iio/imu/adi,adis16480.yaml
index 56e0dc20f5e..e3eec38897b 100644
--- a/dts/upstream/Bindings/iio/imu/adi,adis16480.yaml
+++ b/dts/upstream/Bindings/iio/imu/adi,adis16480.yaml
@@ -23,6 +23,12 @@ properties:
       - adi,adis16497-1
       - adi,adis16497-2
       - adi,adis16497-3
+      - adi,adis16545-1
+      - adi,adis16545-2
+      - adi,adis16545-3
+      - adi,adis16547-1
+      - adi,adis16547-2
+      - adi,adis16547-3
 
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/iio/imu/bosch,bmi160.yaml b/dts/upstream/Bindings/iio/imu/bosch,bmi160.yaml
index 47cfba939ca..3b0a2d8b2e9 100644
--- a/dts/upstream/Bindings/iio/imu/bosch,bmi160.yaml
+++ b/dts/upstream/Bindings/iio/imu/bosch,bmi160.yaml
@@ -16,7 +16,11 @@ description: |
 
 properties:
   compatible:
-    const: bosch,bmi160
+    oneOf:
+      - const: bosch,bmi160
+      - items:
+          - const: bosch,bmi120
+          - const: bosch,bmi160
 
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/iio/light/vishay,veml6075.yaml b/dts/upstream/Bindings/iio/light/vishay,veml6075.yaml
index 91c318746bf..ecf2339e02f 100644
--- a/dts/upstream/Bindings/iio/light/vishay,veml6075.yaml
+++ b/dts/upstream/Bindings/iio/light/vishay,veml6075.yaml
@@ -4,14 +4,19 @@
 $id: http://devicetree.org/schemas/iio/light/vishay,veml6075.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Vishay VEML6075 UVA and UVB sensor
+title: Vishay VEML6075 UVA/B and VEML6040 RGBW sensors
 
 maintainers:
   - Javier Carrasco <javier.carrasco.cruz@gmail.com>
 
+description:
+  VEML6040 datasheet at https://www.vishay.com/docs/84276/veml6040.pdf
+
 properties:
   compatible:
-    const: vishay,veml6075
+    enum:
+      - vishay,veml6040
+      - vishay,veml6075
 
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/iio/magnetometer/fsl,mag3110.yaml b/dts/upstream/Bindings/iio/magnetometer/fsl,mag3110.yaml
index 6b54d32323f..fbe8c2eb085 100644
--- a/dts/upstream/Bindings/iio/magnetometer/fsl,mag3110.yaml
+++ b/dts/upstream/Bindings/iio/magnetometer/fsl,mag3110.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale MAG3110 magnetometer sensor
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 properties:
   compatible:
diff --git a/dts/upstream/Bindings/iio/st,st-sensors.yaml b/dts/upstream/Bindings/iio/st,st-sensors.yaml
index fff7e3d83a0..71c1ee33a39 100644
--- a/dts/upstream/Bindings/iio/st,st-sensors.yaml
+++ b/dts/upstream/Bindings/iio/st,st-sensors.yaml
@@ -26,6 +26,7 @@ properties:
           - st,lis2dw12
           - st,lis2hh12
           - st,lis2dh12-accel
+          - st,lis2ds12
           - st,lis302dl
           - st,lis331dl-accel
           - st,lis331dlh-accel
diff --git a/dts/upstream/Bindings/incomplete-devices.yaml b/dts/upstream/Bindings/incomplete-devices.yaml
new file mode 100644
index 00000000000..cfc1d39441b
--- /dev/null
+++ b/dts/upstream/Bindings/incomplete-devices.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/incomplete-devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rejected, Legacy or Incomplete Devices
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  Some devices will not or should not get a proper Devicetree bindings, but
+  their compatibles are present in Linux drivers for various reasons.
+
+  Examples are devices using ACPI PRP0001 with non-updatable firmware/ACPI
+  tables or old PowerPC platforms without in-tree DTS.
+
+  Following list of devices is an incomplete schema with a goal to pass DT schema
+  checks on undocumented compatibles but also reject any DTS file using such
+  un-approved compatible.
+
+  Usage of any of following compatibles is not allowed in Devicetree sources,
+  even if they come from immutable firmware.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Rejected compatibles in Devicetree, but used in ACPI-based devices
+          with non-updatable firmware/ACPI tables (via ACPI PRP0001)
+        enum:
+          - broadcom,bcm5241
+          - ltr,ltrf216a
+
+      - description: Legacy compatibles used on Macintosh devices
+        enum:
+          - adm1030
+          - bmac+
+          - heathrow-media-bay
+          - keylargo-media-bay
+          - lm87cimt
+          - MAC,adm1030
+          - MAC,ds1775
+          - max6690
+          - ohare-media-bay
+          - ohare-swim3
+          - smu-sat
+          - swim3
+
+      - description: Legacy compatibles used on other PowerPC devices
+        enum:
+          - 1682m-rng
+          - IBM,lhca
+          - IBM,lhea
+          - IBM,lhea-ethernet
+          - mpc5200b-fec-phy
+          - mpc5200-serial
+          - mpc5200-sram
+          - ohci-be
+          - ohci-bigendian
+          - ohci-le
+
+      - description: Legacy compatibles used on SPARC devices
+        enum:
+          - bq4802
+          - ds1287
+          - isa-m5819p
+          - isa-m5823p
+          - m5819
+          - sab82532
+          - SUNW,bbc-beep
+          - SUNW,bbc-i2c
+          - SUNW,CS4231
+          - SUNW,ebus-pic16f747-env
+          - SUNW,kt-cwq
+          - SUNW,kt-mau
+          - SUNW,n2-cwq
+          - SUNW,n2-mau
+          - SUNW,niusl
+          - SUNW,smbus-beep
+          - SUNW,sun4v-console
+          - SUNW,sun4v-pci
+          - SUNW,vf-cwq
+          - SUNW,vf-mau
+
+      - description: Incomplete and/or legacy compatibles for unknown devices
+        enum:
+          - electra-cf
+          - i2cpcf,8584
+          - virtio,uml
+
+      - description: Linux kernel unit tests and sample code
+        enum:
+          - audio-graph-card2-custom-sample
+          - compat1
+          - compat2
+          - compat3
+          - linux,spi-loopback-test
+          - mailbox-test
+          - regulator-virtual-consumer
+
+      - description:
+          Devices on MIPS platform, without any DTS users.  These are
+          unlikely to get converted to DT schema.
+        enum:
+          - mti,ranchu
+
+      - description:
+          Devices on PowerPC platform, without any DTS users.  These are
+          unlikely to get converted to DT schema.
+        enum:
+          - fujitsu,coral
+          - fujitsu,lime
+          - fujitsu,MB86276
+          - fujitsu,MB86277
+          - fujitsu,MB86293
+          - fujitsu,MB86294
+          - fujitsu,mint
+          - ibm,axon-msic
+          - ibm,pmemory
+          - ibm,pmemory-v2
+          - ibm,power-rng
+          - ibm,ppc4xx-spi
+          - ibm,sdram-4xx-ddr2
+          - ibm,secureboot
+          - ibm,secureboot-v1
+          - ibm,secureboot-v2
+          - ibm,secvar-backend
+          - sgy,gpio-halt
+          - wrs,epld-localbus
+
+required:
+  - compatible
+  - broken-usage-of-incorrect-compatible
+
+additionalProperties: false
diff --git a/dts/upstream/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/dts/upstream/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index c384bf0bb25..6bdb8040be6 100644
--- a/dts/upstream/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/dts/upstream/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -22,7 +22,9 @@ properties:
           - const: allwinner,sun8i-a83t-r-lradc
       - const: allwinner,sun50i-r329-lradc
       - items:
-          - const: allwinner,sun20i-d1-lradc
+          - enum:
+              - allwinner,sun50i-h616-lradc
+              - allwinner,sun20i-d1-lradc
           - const: allwinner,sun50i-r329-lradc
 
   reg:
diff --git a/dts/upstream/Bindings/input/cirrus,cs40l50.yaml b/dts/upstream/Bindings/input/cirrus,cs40l50.yaml
new file mode 100644
index 00000000000..89bd06864bd
--- /dev/null
+++ b/dts/upstream/Bindings/input/cirrus,cs40l50.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cirrus,cs40l50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS40L50 Advanced Haptic Driver
+
+maintainers:
+  - James Ogletree <jogletre@opensource.cirrus.com>
+
+description:
+  CS40L50 is a haptic driver with waveform memory,
+  integrated DSP, and closed-loop algorithms.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs40l50
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-a-supply:
+    description: Power supply for internal analog circuits.
+
+  vdd-p-supply:
+    description: Power supply for always-on circuits.
+
+  vdd-io-supply:
+    description: Power supply for digital input/output.
+
+  vdd-b-supply:
+    description: Power supply for the boost converter.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - vdd-io-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      haptic-driver@34 {
+        compatible = "cirrus,cs40l50";
+        reg = <0x34>;
+        interrupt-parent = <&gpio>;
+        interrupts = <113 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio 112 GPIO_ACTIVE_LOW>;
+        vdd-io-supply = <&vreg>;
+      };
+    };
diff --git a/dts/upstream/Bindings/input/ti,nspire-keypad.txt b/dts/upstream/Bindings/input/ti,nspire-keypad.txt
deleted file mode 100644
index 513d94d6e89..00000000000
--- a/dts/upstream/Bindings/input/ti,nspire-keypad.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-TI-NSPIRE Keypad
-
-Required properties:
-- compatible: Compatible property value should be "ti,nspire-keypad".
-
-- reg: Physical base address of the peripheral and length of memory mapped
-  region.
-
-- interrupts: The interrupt number for the peripheral.
-
-- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the
-	maximum and minimum delay time is ~2000us and ~500us respectively
-
-- row-delay: How long to wait before scanning each row.
-
-- clocks: The clock this peripheral is attached to.
-
-- linux,keymap: The keymap to use
-	(see Documentation/devicetree/bindings/input/matrix-keymap.txt)
-
-Optional properties:
-- active-low: Specify that the keypad is active low (i.e. logical low signifies
-	a key press).
-
-Example:
-
-input {
-	compatible = "ti,nspire-keypad";
-	reg = <0x900E0000 0x1000>;
-	interrupts = <16>;
-
-	scan-interval = <1000>;
-	row-delay = <200>;
-
-	clocks = <&apb_pclk>;
-
-	linux,keymap = <
-	0x0000001c	0x0001001c	0x00040039
-	0x0005002c	0x00060015	0x0007000b
-	0x0008000f	0x0100002d	0x01010011
-	0x0102002f	0x01030004	0x01040016
-	0x01050014	0x0106001f	0x01070002
-	0x010a006a	0x02000013	0x02010010
-	0x02020019	0x02030007	0x02040018
-	0x02050031	0x02060032	0x02070005
-	0x02080028	0x0209006c	0x03000026
-	0x03010025	0x03020024	0x0303000a
-	0x03040017	0x03050023	0x03060022
-	0x03070008	0x03080035	0x03090069
-	0x04000021	0x04010012	0x04020020
-	0x0404002e	0x04050030	0x0406001e
-	0x0407000d	0x04080037	0x04090067
-	0x05010038	0x0502000c	0x0503001b
-	0x05040034	0x0505001a	0x05060006
-	0x05080027	0x0509000e	0x050a006f
-	0x0600002b	0x0602004e	0x06030068
-	0x06040003	0x0605006d	0x06060009
-	0x06070001	0x0609000f	0x0708002a
-	0x0709001d	0x070a0033	>;
-};
diff --git a/dts/upstream/Bindings/input/ti,nspire-keypad.yaml b/dts/upstream/Bindings/input/ti,nspire-keypad.yaml
new file mode 100644
index 00000000000..ed3cfff13ad
--- /dev/null
+++ b/dts/upstream/Bindings/input/ti,nspire-keypad.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,nspire-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE Keypad
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+allOf:
+  - $ref: input.yaml#
+  - $ref: matrix-keymap.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,nspire-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  scan-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: How often to scan in us. Based on a APB speed of 33MHz, the
+      maximum and minimum delay time is ~2000us and ~500us respectively
+
+  row-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: How long to wait between scanning each row in us.
+
+  active-low:
+    description: Specify that the keypad is active low.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - scan-interval
+  - row-delay
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    keypad@900e0000 {
+        compatible = "ti,nspire-keypad";
+        reg = <0x900e0000 0x1000>;
+        interrupts = <16>;
+
+        clocks = <&apb_pclk>;
+
+        scan-interval = <1000>;
+        row-delay = <200>;
+
+        linux,keymap = <
+            MATRIX_KEY(0,  0, KEY_ENTER)
+            MATRIX_KEY(0,  1, KEY_ENTER)
+            MATRIX_KEY(0,  4, KEY_SPACE)
+            MATRIX_KEY(0,  5, KEY_Z)
+            MATRIX_KEY(0,  6, KEY_Y)
+            MATRIX_KEY(0,  7, KEY_0)
+        >;
+    };
diff --git a/dts/upstream/Bindings/input/touchscreen/ads7846.txt b/dts/upstream/Bindings/input/touchscreen/ads7846.txt
index 81f6bda97d3..399c8778293 100644
--- a/dts/upstream/Bindings/input/touchscreen/ads7846.txt
+++ b/dts/upstream/Bindings/input/touchscreen/ads7846.txt
@@ -57,6 +57,7 @@ Optional properties:
 					pendown-gpio (u32).
 	pendown-gpio			GPIO handle describing the pin the !PENIRQ
 					line is connected to.
+	ti,hsync-gpios			GPIO line to poll for hsync
 	wakeup-source			use any event on touchscreen as wakeup event.
 					(Legacy property support: "linux,wakeup")
 	touchscreen-size-x		General touchscreen binding, see [1].
diff --git a/dts/upstream/Bindings/input/touchscreen/edt-ft5x06.yaml b/dts/upstream/Bindings/input/touchscreen/edt-ft5x06.yaml
index 745e57c0517..51d48d4130d 100644
--- a/dts/upstream/Bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/dts/upstream/Bindings/input/touchscreen/edt-ft5x06.yaml
@@ -39,8 +39,10 @@ properties:
       - edt,edt-ft5406
       - edt,edt-ft5506
       - evervision,ev-ft5726
+      - focaltech,ft5426
       - focaltech,ft5452
       - focaltech,ft6236
+      - focaltech,ft8201
       - focaltech,ft8719
 
   reg:
diff --git a/dts/upstream/Bindings/input/touchscreen/eeti,exc3000.yaml b/dts/upstream/Bindings/input/touchscreen/eeti,exc3000.yaml
index 9dc25d30a0a..1c7ae05a8c1 100644
--- a/dts/upstream/Bindings/input/touchscreen/eeti,exc3000.yaml
+++ b/dts/upstream/Bindings/input/touchscreen/eeti,exc3000.yaml
@@ -14,10 +14,14 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - eeti,exc3000
-      - eeti,exc80h60
-      - eeti,exc80h84
+    oneOf:
+      - const: eeti,exc3000
+      - const: eeti,exc80h60
+      - const: eeti,exc80h84
+      - items:
+          - enum:
+              - eeti,exc81w32
+          - const: eeti,exc80h84
   reg:
     const: 0x2a
   interrupts:
diff --git a/dts/upstream/Bindings/input/touchscreen/ektf2127.txt b/dts/upstream/Bindings/input/touchscreen/ektf2127.txt
deleted file mode 100644
index c9f2c9f578e..00000000000
--- a/dts/upstream/Bindings/input/touchscreen/ektf2127.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Elan eKTF2127 I2C touchscreen controller
-
-Required properties:
- - compatible		  : "elan,ektf2127" or "elan,ektf2132"
- - reg			  : I2C slave address of the chip (0x40)
- - interrupts		  : interrupt specification for the ektf2127 interrupt
- - power-gpios		  : GPIO specification for the pin connected to the
-			    ektf2127's wake input. This needs to be driven high
-			    to take ektf2127 out of its low power state
-
-For additional optional properties see: touchscreen.txt
-
-Example:
-
-i2c@00000000 {
-	ektf2127: touchscreen@15 {
-		compatible = "elan,ektf2127";
-		reg = <0x15>;
-		interrupt-parent = <&pio>;
-		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
-		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
-};
diff --git a/dts/upstream/Bindings/input/touchscreen/elan,ektf2127.yaml b/dts/upstream/Bindings/input/touchscreen/elan,ektf2127.yaml
new file mode 100644
index 00000000000..ff0ec3fd24c
--- /dev/null
+++ b/dts/upstream/Bindings/input/touchscreen/elan,ektf2127.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/elan,ektf2127.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTF2127 I2C touchscreen controller
+
+maintainers:
+  - Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - elan,ektf2127
+      - elan,ektf2132
+      - elan,ektf2232
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@15 {
+            compatible = "elan,ektf2127";
+            reg = <0x15>;
+            interrupt-parent = <&pio>;
+            interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+            power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/input/touchscreen/himax,hx83112b.yaml b/dts/upstream/Bindings/input/touchscreen/himax,hx83112b.yaml
index f42b23d532e..f5cfacb5e96 100644
--- a/dts/upstream/Bindings/input/touchscreen/himax,hx83112b.yaml
+++ b/dts/upstream/Bindings/input/touchscreen/himax,hx83112b.yaml
@@ -15,6 +15,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - himax,hx83100a
       - himax,hx83112b
 
   reg:
diff --git a/dts/upstream/Bindings/input/touchscreen/imagis,ist3038c.yaml b/dts/upstream/Bindings/input/touchscreen/imagis,ist3038c.yaml
index 77ba280b3bd..e24cbd96099 100644
--- a/dts/upstream/Bindings/input/touchscreen/imagis,ist3038c.yaml
+++ b/dts/upstream/Bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - imagis,ist3032c
+      - imagis,ist3038
       - imagis,ist3038b
       - imagis,ist3038c
 
diff --git a/dts/upstream/Bindings/interconnect/mediatek,mt8183-emi.yaml b/dts/upstream/Bindings/interconnect/mediatek,mt8183-emi.yaml
new file mode 100644
index 00000000000..017c8478b2a
--- /dev/null
+++ b/dts/upstream/Bindings/interconnect/mediatek,mt8183-emi.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/mediatek,mt8183-emi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek External Memory Interface (EMI) Interconnect
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  EMI interconnect providers support system bandwidth requirements through
+  Dynamic Voltage Frequency Scaling Resource Collector (DVFSRC) hardware.
+  The provider is able to communicate with the DVFSRC through Secure Monitor
+  Call (SMC).
+
+             ICC provider         ICC Nodes
+                              ----          ----
+             _________       |CPU |   |--- |VPU |
+    _____   |         |-----  ----    |     ----
+   |     |->|  DRAM   |       ----    |     ----
+   |DRAM |->|scheduler|----- |GPU |   |--- |DISP|
+   |     |->|  (EMI)  |       ----    |     ----
+   |_____|->|_________|---.   -----   |     ----
+               /|\         `-|MMSYS|--|--- |VDEC|
+                |             -----   |     ----
+                |                     |     ----
+                | change DRAM freq    |--- |VENC|
+             --------                 |     ----
+    SMC --> | DVFSRC |                |     ----
+             --------                 |--- |IMG |
+                                      |     ----
+                                      |     ----
+                                      |--- |CAM |
+                                            ----
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-emi
+      - mediatek,mt8195-emi
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#interconnect-cells'
+
+unevaluatedProperties: false
diff --git a/dts/upstream/Bindings/interconnect/qcom,msm8953.yaml b/dts/upstream/Bindings/interconnect/qcom,msm8953.yaml
new file mode 100644
index 00000000000..732e9fa001a
--- /dev/null
+++ b/dts/upstream/Bindings/interconnect/qcom,msm8953.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8953.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8953 Network-On-Chip interconnect
+
+maintainers:
+  - Barnabas Czeman <barnabas.czeman@mainlining.org>
+
+description: |
+  The Qualcomm MSM8953 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+  See also:
+  - dt-bindings/interconnect/qcom,msm8953.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8953-bimc
+      - qcom,msm8953-pcnoc
+      - qcom,msm8953-snoc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  '#interconnect-cells':
+    const: 2
+
+patternProperties:
+  '^interconnect-[a-z0-9\-]+$':
+    type: object
+    $ref: qcom,rpm-common.yaml#
+    unevaluatedProperties: false
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    properties:
+      compatible:
+        const: qcom,msm8953-snoc-mm
+
+    required:
+      - compatible
+      - '#interconnect-cells'
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8953-pcnoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCNOC USB3 AXI Clock.
+
+        clock-names:
+          const: pcnoc_usb3_axi
+
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/clock/qcom,gcc-msm8953.h>
+
+      snoc: interconnect@580000 {
+          compatible = "qcom,msm8953-snoc";
+          reg = <0x580000 0x16080>;
+
+          #interconnect-cells = <2>;
+
+          snoc_mm: interconnect-snoc {
+              compatible = "qcom,msm8953-snoc-mm";
+
+              #interconnect-cells = <2>;
+          };
+      };
diff --git a/dts/upstream/Bindings/interconnect/qcom,msm8998-bwmon.yaml b/dts/upstream/Bindings/interconnect/qcom,msm8998-bwmon.yaml
index 05067e197ab..2cd1f5590fd 100644
--- a/dts/upstream/Bindings/interconnect/qcom,msm8998-bwmon.yaml
+++ b/dts/upstream/Bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -35,6 +35,7 @@ properties:
               - qcom,sm8250-cpu-bwmon
               - qcom,sm8550-cpu-bwmon
               - qcom,sm8650-cpu-bwmon
+              - qcom,x1e80100-cpu-bwmon
           - const: qcom,sdm845-bwmon    # BWMON v4, unified register space
       - items:
           - enum:
@@ -44,6 +45,7 @@ properties:
               - qcom,sm8250-llcc-bwmon
               - qcom,sm8550-llcc-bwmon
               - qcom,sm8650-llcc-bwmon
+              - qcom,x1e80100-llcc-bwmon
           - const: qcom,sc7280-llcc-bwmon
       - const: qcom,sc7280-llcc-bwmon   # BWMON v5
       - const: qcom,sdm845-llcc-bwmon   # BWMON v5
@@ -72,7 +74,6 @@ required:
   - interconnects
   - interrupts
   - operating-points-v2
-  - opp-table
   - reg
 
 additionalProperties: false
diff --git a/dts/upstream/Bindings/interconnect/qcom,sc7280-rpmh.yaml b/dts/upstream/Bindings/interconnect/qcom,sc7280-rpmh.yaml
index b135597d948..78210791496 100644
--- a/dts/upstream/Bindings/interconnect/qcom,sc7280-rpmh.yaml
+++ b/dts/upstream/Bindings/interconnect/qcom,sc7280-rpmh.yaml
@@ -8,7 +8,7 @@ title: Qualcomm RPMh Network-On-Chip Interconnect on SC7280
 
 maintainers:
   - Bjorn Andersson <andersson@kernel.org>
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   RPMh interconnect providers support system bandwidth requirements through
@@ -35,6 +35,10 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
 
@@ -53,10 +57,50 @@ allOf:
       required:
         - reg
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-aggre1-noc
+              - qcom,sc7280-aggre2-noc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
 unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
     interconnect {
         compatible = "qcom,sc7280-clk-virt";
         #interconnect-cells = <2>;
@@ -69,3 +113,12 @@ examples:
         #interconnect-cells = <2>;
         qcom,bcm-voters = <&apps_bcm_voter>;
     };
+
+    interconnect@16e0000 {
+        reg = <0x016e0000 0x1c080>;
+        compatible = "qcom,sc7280-aggre1-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+    };
diff --git a/dts/upstream/Bindings/interconnect/qcom,sc8280xp-rpmh.yaml b/dts/upstream/Bindings/interconnect/qcom,sc8280xp-rpmh.yaml
index 6c2da03f0cd..100c6863690 100644
--- a/dts/upstream/Bindings/interconnect/qcom,sc8280xp-rpmh.yaml
+++ b/dts/upstream/Bindings/interconnect/qcom,sc8280xp-rpmh.yaml
@@ -8,7 +8,7 @@ title: Qualcomm RPMh Network-On-Chip Interconnect on SC8280XP
 
 maintainers:
   - Bjorn Andersson <andersson@kernel.org>
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   RPMh interconnect providers support system bandwidth requirements through
diff --git a/dts/upstream/Bindings/interconnect/qcom,sm8450-rpmh.yaml b/dts/upstream/Bindings/interconnect/qcom,sm8450-rpmh.yaml
index 3cff7e66225..300640a533d 100644
--- a/dts/upstream/Bindings/interconnect/qcom,sm8450-rpmh.yaml
+++ b/dts/upstream/Bindings/interconnect/qcom,sm8450-rpmh.yaml
@@ -8,7 +8,7 @@ title: Qualcomm RPMh Network-On-Chip Interconnect on SM8450
 
 maintainers:
   - Bjorn Andersson <andersson@kernel.org>
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   RPMh interconnect providers support system bandwidth requirements through
diff --git a/dts/upstream/Bindings/interrupt-controller/fsl,irqsteer.yaml b/dts/upstream/Bindings/interrupt-controller/fsl,irqsteer.yaml
index 20ad4ad82ad..aae676ba30e 100644
--- a/dts/upstream/Bindings/interrupt-controller/fsl,irqsteer.yaml
+++ b/dts/upstream/Bindings/interrupt-controller/fsl,irqsteer.yaml
@@ -14,7 +14,10 @@ properties:
     oneOf:
       - const: fsl,imx-irqsteer
       - items:
-          - const: fsl,imx8m-irqsteer
+          - enum:
+              - fsl,imx8m-irqsteer
+              - fsl,imx8mp-irqsteer
+              - fsl,imx8qxp-irqsteer
           - const: fsl,imx-irqsteer
 
   reg:
@@ -42,6 +45,9 @@ properties:
   clock-names:
     const: ipg
 
+  power-domains:
+    maxItems: 1
+
   interrupt-controller: true
 
   "#interrupt-cells":
@@ -70,6 +76,21 @@ required:
   - fsl,channel
   - fsl,num-irqs
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mp-irqsteer
+              - fsl,imx8qxp-irqsteer
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
 additionalProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/interrupt-controller/fsl,ls-extirq.yaml b/dts/upstream/Bindings/interrupt-controller/fsl,ls-extirq.yaml
index 887e565b957..199b34fdbef 100644
--- a/dts/upstream/Bindings/interrupt-controller/fsl,ls-extirq.yaml
+++ b/dts/upstream/Bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -8,7 +8,6 @@ title: Freescale Layerscape External Interrupt Controller
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Li Yang <leoyang.li@nxp.com>
 
 description: |
   Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
diff --git a/dts/upstream/Bindings/interrupt-controller/fsl,ls-msi.yaml b/dts/upstream/Bindings/interrupt-controller/fsl,ls-msi.yaml
new file mode 100644
index 00000000000..9ba8d4d7335
--- /dev/null
+++ b/dts/upstream/Bindings/interrupt-controller/fsl,ls-msi.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape SCFG PCIe MSI controller
+
+description: |
+  This interrupt controller hardware is a second level interrupt controller that
+  is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+  platforms. If interrupt-parent is not provided, the default parent interrupt
+  controller will be used.
+
+  Each PCIe node needs to have property msi-parent that points to
+  MSI controller node
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1012a-msi
+      - fsl,ls1021a-msi
+      - fsl,ls1043a-msi
+      - fsl,ls1043a-v1.1-msi
+      - fsl,ls1046a-msi
+
+  reg:
+    maxItems: 1
+
+  '#msi-cells':
+    const: 1
+
+  interrupts:
+    items:
+      - description: Shared MSI interrupt group 0
+      - description: Shared MSI interrupt group 1
+      - description: Shared MSI interrupt group 2
+      - description: Shared MSI interrupt group 3
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - interrupts
+
+allOf:
+  - $ref: msi-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1046a-msi
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@1571000 {
+        compatible = "fsl,ls1043a-msi";
+        reg = <0x1571000 0x8>;
+        msi-controller;
+        #msi-cells = <1>;
+        interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/dts/upstream/Bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/dts/upstream/Bindings/interrupt-controller/fsl,ls-scfg-msi.txt
deleted file mode 100644
index 454ce04d678..00000000000
--- a/dts/upstream/Bindings/interrupt-controller/fsl,ls-scfg-msi.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Freescale Layerscape SCFG PCIe MSI controller
-
-Required properties:
-
-- compatible: should be "fsl,<soc-name>-msi" to identify
-	      Layerscape PCIe MSI controller block such as:
-              "fsl,ls1021a-msi"
-              "fsl,ls1043a-msi"
-              "fsl,ls1046a-msi"
-              "fsl,ls1043a-v1.1-msi"
-              "fsl,ls1012a-msi"
-- msi-controller: indicates that this is a PCIe MSI controller node
-- reg: physical base address of the controller and length of memory mapped.
-- interrupts: an interrupt to the parent interrupt controller.
-
-This interrupt controller hardware is a second level interrupt controller that
-is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
-platforms. If interrupt-parent is not provided, the default parent interrupt
-controller will be used.
-Each PCIe node needs to have property msi-parent that points to
-MSI controller node
-
-Examples:
-
-	msi1: msi-controller@1571000 {
-		compatible = "fsl,ls1043a-msi";
-		reg = <0x0 0x1571000 0x0 0x8>,
-		msi-controller;
-		interrupts = <0 116 0x4>;
-	};
diff --git a/dts/upstream/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt b/dts/upstream/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
deleted file mode 100644
index 5fc03134a99..00000000000
--- a/dts/upstream/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Marvell Armada 370, 375, 38x, XP Interrupt Controller
------------------------------------------------------
-
-Required properties:
-- compatible: Should be "marvell,mpic"
-- interrupt-controller: Identifies the node as an interrupt controller.
-- msi-controller: Identifies the node as an PCI Message Signaled
-  Interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
-  The cell is the IRQ number
-
-- reg: Should contain PMIC registers location and length. First pair
-  for the main interrupt registers, second pair for the per-CPU
-  interrupt registers. For this last pair, to be compliant with SMP
-  support, the "virtual" must be use (For the record, these registers
-  automatically map to the interrupt controller registers of the
-  current CPU)
-
-Optional properties:
-
-- interrupts: If defined, then it indicates that this MPIC is
-  connected as a slave to another interrupt controller. This is
-  typically the case on Armada 375 and Armada 38x, where the MPIC is
-  connected as a slave to the Cortex-A9 GIC. The provided interrupt
-  indicate to which GIC interrupt the MPIC output is connected.
-
-Example:
-
-        mpic: interrupt-controller@d0020000 {
-              compatible = "marvell,mpic";
-              #interrupt-cells = <1>;
-              #address-cells = <1>;
-              #size-cells = <1>;
-              interrupt-controller;
-              msi-controller;
-              reg = <0xd0020a00 0x1d0>,
-                    <0xd0021070 0x58>;
-        };
diff --git a/dts/upstream/Bindings/interrupt-controller/marvell,mpic.yaml b/dts/upstream/Bindings/interrupt-controller/marvell,mpic.yaml
new file mode 100644
index 00000000000..616a41c8735
--- /dev/null
+++ b/dts/upstream/Bindings/interrupt-controller/marvell,mpic.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,mpic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 370, 375, 38x, 39x, XP Interrupt Controller
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+description: |
+  The top-level interrupt controller on Marvell Armada 370 and XP. On these
+  platforms it also provides inter-processor interrupts.
+
+  On Marvell Armada 375, 38x and 39x this controller is wired under ARM GIC.
+
+  Provides MSI handling for the PCIe controllers.
+
+properties:
+  compatible:
+    const: marvell,mpic
+
+  reg:
+    items:
+      - description: main registers
+      - description: per-cpu registers
+
+  interrupts:
+    items:
+      - description: |
+          Parent interrupt on platforms where MPIC is not the top-level
+          interrupt controller.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  msi-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - msi-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@20a00 {
+        compatible = "marvell,mpic";
+        reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+        interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        msi-controller;
+    };
diff --git a/dts/upstream/Bindings/interrupt-controller/microchip,lan966x-oic.yaml b/dts/upstream/Bindings/interrupt-controller/microchip,lan966x-oic.yaml
new file mode 100644
index 00000000000..b2adc717417
--- /dev/null
+++ b/dts/upstream/Bindings/interrupt-controller/microchip,lan966x-oic.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,lan966x-oic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966x outband interrupt controller
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+  The Microchip LAN966x outband interrupt controller (OIC) maps the internal
+  interrupt sources of the LAN966x device to an external interrupt.
+  When the LAN966x device is used as a PCI device, the external interrupt is
+  routed to the PCI interrupt.
+
+properties:
+  compatible:
+    const: microchip,lan966x-oic
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@e00c0120 {
+        compatible = "microchip,lan966x-oic";
+        reg = <0xe00c0120 0x190>;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+        interrupts = <0>;
+        interrupt-parent = <&intc>;
+    };
+...
diff --git a/dts/upstream/Bindings/interrupt-controller/qcom,pdc.yaml b/dts/upstream/Bindings/interrupt-controller/qcom,pdc.yaml
index 4bdc8321904..985fa10abb9 100644
--- a/dts/upstream/Bindings/interrupt-controller/qcom,pdc.yaml
+++ b/dts/upstream/Bindings/interrupt-controller/qcom,pdc.yaml
@@ -30,6 +30,7 @@ properties:
           - qcom,sa8775p-pdc
           - qcom,sc7180-pdc
           - qcom,sc7280-pdc
+          - qcom,sc8180x-pdc
           - qcom,sc8280xp-pdc
           - qcom,sdm670-pdc
           - qcom,sdm845-pdc
diff --git a/dts/upstream/Bindings/interrupt-controller/realtek,rtl-intc.yaml b/dts/upstream/Bindings/interrupt-controller/realtek,rtl-intc.yaml
index fb559372405..833a01cdd1b 100644
--- a/dts/upstream/Bindings/interrupt-controller/realtek,rtl-intc.yaml
+++ b/dts/upstream/Bindings/interrupt-controller/realtek,rtl-intc.yaml
@@ -25,6 +25,7 @@ properties:
       - items:
           - enum:
               - realtek,rtl8380-intc
+              - realtek,rtl9300-intc
           - const: realtek,rtl-intc
       - const: realtek,rtl-intc
         deprecated: true
@@ -35,7 +36,10 @@ properties:
     const: 1
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: vpe0 registers
+      - description: vpe1 registers
 
   interrupts:
     minItems: 1
@@ -71,6 +75,20 @@ allOf:
     else:
       required:
         - interrupts
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: realtek,rtl9300-intc
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
 
 additionalProperties: false
 
diff --git a/dts/upstream/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/dts/upstream/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
index daef4ee06f4..44b6ae5fc80 100644
--- a/dts/upstream/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
+++ b/dts/upstream/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -21,13 +21,16 @@ description: |
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r9a07g043u-irqc   # RZ/G2UL
-          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
-          - renesas,r9a07g054-irqc    # RZ/V2L
-          - renesas,r9a08g045-irqc    # RZ/G3S
-      - const: renesas,rzg2l-irqc
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043u-irqc    # RZ/G2UL
+              - renesas,r9a07g044-irqc     # RZ/G2{L,LC}
+              - renesas,r9a07g054-irqc     # RZ/V2L
+              - renesas,r9a08g045-irqc     # RZ/G3S
+          - const: renesas,rzg2l-irqc
+
+      - const: renesas,r9a07g043f-irqc     # RZ/Five
 
   '#interrupt-cells':
     description: The first cell should contain a macro RZG2L_{NMI,IRQX} included in the
diff --git a/dts/upstream/Bindings/interrupt-controller/riscv,cpu-intc.txt b/dts/upstream/Bindings/interrupt-controller/riscv,cpu-intc.txt
deleted file mode 100644
index 265b223cd97..00000000000
--- a/dts/upstream/Bindings/interrupt-controller/riscv,cpu-intc.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-RISC-V Hart-Level Interrupt Controller (HLIC)
----------------------------------------------
-
-RISC-V cores include Control Status Registers (CSRs) which are local to each
-CPU core (HART in RISC-V terminology) and can be read or written by software.
-Some of these CSRs are used to control local interrupts connected to the core.
-Every interrupt is ultimately routed through a hart's HLIC before it
-interrupts that hart.
-
-The RISC-V supervisor ISA manual specifies three interrupt sources that are
-attached to every HLIC: software interrupts, the timer interrupt, and external
-interrupts.  Software interrupts are used to send IPIs between cores.  The
-timer interrupt comes from an architecturally mandated real-time timer that is
-controlled via Supervisor Binary Interface (SBI) calls and CSR reads.  External
-interrupts connect all other device interrupts to the HLIC, which are routed
-via the platform-level interrupt controller (PLIC).
-
-All RISC-V systems that conform to the supervisor ISA specification are
-required to have a HLIC with these three interrupt sources present.  Since the
-interrupt map is defined by the ISA it's not listed in the HLIC's device tree
-entry, though external interrupt controllers (like the PLIC, for example) will
-need to define how their interrupts map to the relevant HLICs.  This means
-a PLIC interrupt property will typically list the HLICs for all present HARTs
-in the system.
-
-Required properties:
-- compatible : "riscv,cpu-intc"
-- #interrupt-cells : should be <1>.  The interrupt sources are defined by the
-  RISC-V supervisor ISA manual, with only the following three interrupts being
-  defined for supervisor mode:
-    - Source 1 is the supervisor software interrupt, which can be sent by an SBI
-      call and is reserved for use by software.
-    - Source 5 is the supervisor timer interrupt, which can be configured by
-      SBI calls and implements a one-shot timer.
-    - Source 9 is the supervisor external interrupt, which chains to all other
-      device interrupts.
-- interrupt-controller : Identifies the node as an interrupt controller
-
-Furthermore, this interrupt-controller MUST be embedded inside the cpu
-definition of the hart whose CSRs control these local interrupts.
-
-An example device tree entry for a HLIC is show below.
-
-	cpu1: cpu@1 {
-		compatible = "riscv";
-		...
-		cpu1-intc: interrupt-controller {
-			#interrupt-cells = <1>;
-			compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
-			interrupt-controller;
-		};
-	};
diff --git a/dts/upstream/Bindings/interrupt-controller/riscv,cpu-intc.yaml b/dts/upstream/Bindings/interrupt-controller/riscv,cpu-intc.yaml
new file mode 100644
index 00000000000..83256cc0bd5
--- /dev/null
+++ b/dts/upstream/Bindings/interrupt-controller/riscv,cpu-intc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,cpu-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Hart-Level Interrupt Controller (HLIC)
+
+description:
+  RISC-V cores include Control Status Registers (CSRs) which are local to
+  each CPU core (HART in RISC-V terminology) and can be read or written by
+  software. Some of these CSRs are used to control local interrupts connected
+  to the core. Every interrupt is ultimately routed through a hart's HLIC
+  before it interrupts that hart.
+
+  The RISC-V supervisor ISA manual specifies three interrupt sources that are
+  attached to every HLIC namely software interrupts, the timer interrupt, and
+  external interrupts. Software interrupts are used to send IPIs between
+  cores.  The timer interrupt comes from an architecturally mandated real-
+  time timer that is controlled via Supervisor Binary Interface (SBI) calls
+  and CSR reads. External interrupts connect all other device interrupts to
+  the HLIC, which are routed via the platform-level interrupt controller
+  (PLIC).
+
+  All RISC-V systems that conform to the supervisor ISA specification are
+  required to have a HLIC with these three interrupt sources present.  Since
+  the interrupt map is defined by the ISA it's not listed in the HLIC's device
+  tree entry, though external interrupt controllers (like the PLIC, for
+  example) will need to define how their interrupts map to the relevant HLICs.
+  This means a PLIC interrupt property will typically list the HLICs for all
+  present HARTs in the system.
+
+maintainers:
+  - Palmer Dabbelt <palmer@dabbelt.com>
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: andestech,cpu-intc
+          - const: riscv,cpu-intc
+      - const: riscv,cpu-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description: |
+      The interrupt sources are defined by the RISC-V supervisor ISA manual,
+      with only the following three interrupts being defined for
+      supervisor mode:
+        - Source 1 is the supervisor software interrupt, which can be sent by
+          an SBI call and is reserved for use by software.
+        - Source 5 is the supervisor timer interrupt, which can be configured
+          by SBI calls and implements a one-shot timer.
+        - Source 9 is the supervisor external interrupt, which chains to all
+          other device interrupts.
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        #interrupt-cells = <1>;
+        compatible = "riscv,cpu-intc";
+        interrupt-controller;
+    };
diff --git a/dts/upstream/Bindings/iommu/allwinner,sun50i-h6-iommu.yaml b/dts/upstream/Bindings/iommu/allwinner,sun50i-h6-iommu.yaml
index e20016f1201..a8409db4a3e 100644
--- a/dts/upstream/Bindings/iommu/allwinner,sun50i-h6-iommu.yaml
+++ b/dts/upstream/Bindings/iommu/allwinner,sun50i-h6-iommu.yaml
@@ -17,7 +17,12 @@ properties:
       The content of the cell is the master ID.
 
   compatible:
-    const: allwinner,sun50i-h6-iommu
+    oneOf:
+      - const: allwinner,sun50i-h6-iommu
+      - const: allwinner,sun50i-h616-iommu
+      - items:
+          - const: allwinner,sun55i-a523-iommu
+          - const: allwinner,sun50i-h616-iommu
 
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/iommu/arm,smmu.yaml b/dts/upstream/Bindings/iommu/arm,smmu.yaml
index 5c130cf06a2..280b4e49f21 100644
--- a/dts/upstream/Bindings/iommu/arm,smmu.yaml
+++ b/dts/upstream/Bindings/iommu/arm,smmu.yaml
@@ -86,6 +86,7 @@ properties:
               - qcom,qcm2290-smmu-500
               - qcom,sa8775p-smmu-500
               - qcom,sc7280-smmu-500
+              - qcom,sc8180x-smmu-500
               - qcom,sc8280xp-smmu-500
               - qcom,sm6115-smmu-500
               - qcom,sm6125-smmu-500
@@ -95,6 +96,7 @@ properties:
               - qcom,sm8450-smmu-500
               - qcom,sm8550-smmu-500
               - qcom,sm8650-smmu-500
+              - qcom,x1e80100-smmu-500
           - const: qcom,adreno-smmu
           - const: qcom,smmu-500
           - const: arm,mmu-500
@@ -415,6 +417,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sc8180x-smmu-500
               - qcom,sm6350-smmu-v2
               - qcom,sm7150-smmu-v2
               - qcom,sm8150-smmu-500
@@ -520,6 +523,7 @@ allOf:
             - enum:
                 - qcom,sm8550-smmu-500
                 - qcom,sm8650-smmu-500
+                - qcom,x1e80100-smmu-500
             - const: qcom,adreno-smmu
             - const: qcom,smmu-500
             - const: arm,mmu-500
@@ -550,14 +554,12 @@ allOf:
               - nvidia,smmu-500
               - qcom,qdu1000-smmu-500
               - qcom,sc7180-smmu-500
-              - qcom,sc8180x-smmu-500
               - qcom,sdm670-smmu-500
               - qcom,sdm845-smmu-500
               - qcom,sdx55-smmu-500
               - qcom,sdx65-smmu-500
               - qcom,sm6350-smmu-500
               - qcom,sm6375-smmu-500
-              - qcom,x1e80100-smmu-500
     then:
       properties:
         clock-names: false
diff --git a/dts/upstream/Bindings/iommu/msm,iommu-v0.txt b/dts/upstream/Bindings/iommu/msm,iommu-v0.txt
deleted file mode 100644
index 20236385f26..00000000000
--- a/dts/upstream/Bindings/iommu/msm,iommu-v0.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* QCOM IOMMU
-
-The MSM IOMMU is an implementation compatible with the ARM VMSA short
-descriptor page tables. It provides address translation for bus masters outside
-of the CPU, each connected to the IOMMU through a port called micro-TLB.
-
-Required Properties:
-
-  - compatible: Must contain "qcom,apq8064-iommu".
-  - reg: Base address and size of the IOMMU registers.
-  - interrupts: Specifiers for the MMU fault interrupts. For instances that
-    support secure mode two interrupts must be specified, for non-secure and
-    secure mode, in that order. For instances that don't support secure mode a
-    single interrupt must be specified.
-  - #iommu-cells: The number of cells needed to specify the stream id. This
-		  is always 1.
-  - qcom,ncb:	  The total number of context banks in the IOMMU.
-  - clocks	: List of clocks to be used during SMMU register access. See
-		  Documentation/devicetree/bindings/clock/clock-bindings.txt
-		  for information about the format. For each clock specified
-		  here, there must be a corresponding entry in clock-names
-		  (see below).
-
-  - clock-names	: List of clock names corresponding to the clocks specified in
-		  the "clocks" property (above).
-		  Should be "smmu_pclk" for specifying the interface clock
-		  required for iommu's register accesses.
-		  Should be "smmu_clk" for specifying the functional clock
-		  required by iommu for bus accesses.
-
-Each bus master connected to an IOMMU must reference the IOMMU in its device
-node with the following property:
-
-  - iommus: A reference to the IOMMU in multiple cells. The first cell is a
-	    phandle to the IOMMU and the second cell is the stream id.
-	    A single master device can be connected to more than one iommu
-	    and multiple contexts in each of the iommu. So multiple entries
-	    are required to list all the iommus and the stream ids that the
-	    master is connected to.
-
-Example: mdp iommu and its bus master
-
-                mdp_port0: iommu@7500000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "smmu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc MDP_AXI_CLK>;
-			reg = <0x07500000 0x100000>;
-			interrupts =
-			    <GIC_SPI 63 0>,
-			    <GIC_SPI 64 0>;
-			qcom,ncb = <2>;
-		};
-
-		mdp: qcom,mdp@5100000 {
-			compatible = "qcom,mdp";
-			...
-			iommus = <&mdp_port0 0
-				  &mdp_port0 2>;
-		};
diff --git a/dts/upstream/Bindings/iommu/qcom,apq8064-iommu.yaml b/dts/upstream/Bindings/iommu/qcom,apq8064-iommu.yaml
new file mode 100644
index 00000000000..9f83f851e61
--- /dev/null
+++ b/dts/upstream/Bindings/iommu/qcom,apq8064-iommu.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iommu/qcom,apq8064-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APQ8064 IOMMU
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+
+description:
+  The MSM IOMMU is an implementation compatible with the ARM VMSA short
+  descriptor page tables. It provides address translation for bus masters
+  outside of the CPU, each connected to the IOMMU through a port called micro-TLB.
+
+properties:
+  compatible:
+    const: qcom,apq8064-iommu
+
+  clocks:
+    items:
+      - description: interface clock for register accesses
+      - description: functional clock for bus accesses
+
+  clock-names:
+    items:
+      - const: smmu_pclk
+      - const: iommu_clk
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifiers for the MMU fault interrupts.
+    minItems: 1
+    items:
+      - description: non-secure mode interrupt
+      - description: secure mode interrupt (for instances which supports it)
+
+  "#iommu-cells":
+    const: 1
+    description: Each IOMMU specifier describes a single Stream ID.
+
+  qcom,ncb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The total number of context banks in the IOMMU.
+    minimum: 1
+    maximum: 4
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - qcom,ncb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    iommu@7500000 {
+            compatible = "qcom,apq8064-iommu";
+            reg = <0x07500000 0x100000>;
+            interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk SMMU_AHB_CLK>,
+                     <&clk MDP_AXI_CLK>;
+            clock-names = "smmu_pclk",
+                          "iommu_clk";
+            #iommu-cells = <1>;
+            qcom,ncb = <2>;
+    };
diff --git a/dts/upstream/Bindings/iommu/qcom,iommu.yaml b/dts/upstream/Bindings/iommu/qcom,iommu.yaml
index a74eb899c38..f8cebc9e8cd 100644
--- a/dts/upstream/Bindings/iommu/qcom,iommu.yaml
+++ b/dts/upstream/Bindings/iommu/qcom,iommu.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies legacy IOMMU implementations
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   Qualcomm "B" family devices which are not compatible with arm-smmu have
@@ -25,6 +25,7 @@ properties:
           - const: qcom,msm-iommu-v1
       - items:
           - enum:
+              - qcom,msm8953-iommu
               - qcom,msm8976-iommu
           - const: qcom,msm-iommu-v2
 
diff --git a/dts/upstream/Bindings/leds/backlight/ti,lm3509.yaml b/dts/upstream/Bindings/leds/backlight/ti,lm3509.yaml
new file mode 100644
index 00000000000..482fae71dd5
--- /dev/null
+++ b/dts/upstream/Bindings/leds/backlight/ti,lm3509.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/ti,lm3509.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LM3509 High Efficiency Boost for White LED's and/or OLED Displays
+
+maintainers:
+  - Patrick Gansterer <paroga@paroga.com>
+
+description:
+  The LM3509 current mode boost converter offers two separate outputs.
+  https://www.ti.com/product/LM3509
+
+properties:
+  compatible:
+    const: ti,lm3509
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reset-gpios:
+    maxItems: 1
+
+  ti,brightness-rate-of-change-us:
+    description: Brightness Rate of Change in microseconds.
+    enum: [51, 13000, 26000, 52000]
+
+  ti,oled-mode:
+    description: Enable OLED mode.
+    type: boolean
+
+patternProperties:
+  "^led@[01]$":
+    type: object
+    description: Properties for a string of connected LEDs.
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        description:
+          The control register that is used to program the two current sinks.
+          The LM3509 has two registers (BMAIN and BSUB) and are represented
+          as 0 or 1 in this property. The two current sinks can be controlled
+          independently with both registers, or register BMAIN can be
+          configured to control both sinks with the led-sources property.
+        minimum: 0
+        maximum: 1
+
+      label: true
+
+      led-sources:
+        minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
+
+      default-brightness:
+        minimum: 0
+        maximum: 31
+        default: 18
+
+      max-brightness:
+        minimum: 0
+        maximum: 31
+        default: 31
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@36 {
+            compatible = "ti,lm3509";
+            reg = <0x36>;
+            reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+            ti,oled-mode;
+            ti,brightness-rate-of-change-us = <52000>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0>;
+                led-sources = <0 1>;
+                label = "lcd-backlight";
+                default-brightness = <12>;
+                max-brightness = <31>;
+            };
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@36 {
+            compatible = "ti,lm3509";
+            reg = <0x36>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0>;
+                default-brightness = <12>;
+            };
+
+            led@1 {
+                reg = <1>;
+                default-brightness = <15>;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/leds/leds-lp55xx.yaml b/dts/upstream/Bindings/leds/leds-lp55xx.yaml
index e9d4514d016..fe8aaecf301 100644
--- a/dts/upstream/Bindings/leds/leds-lp55xx.yaml
+++ b/dts/upstream/Bindings/leds/leds-lp55xx.yaml
@@ -28,6 +28,7 @@ properties:
       - national,lp5523
       - ti,lp55231
       - ti,lp5562
+      - ti,lp5569
       - ti,lp8501
 
   reg:
@@ -151,6 +152,16 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/string
         description: name of channel
 
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: ti,lp8501
+then:
+  properties:
+    pwr-sel: false
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/leds/silergy,sy7802.yaml b/dts/upstream/Bindings/leds/silergy,sy7802.yaml
new file mode 100644
index 00000000000..46b8e5452b6
--- /dev/null
+++ b/dts/upstream/Bindings/leds/silergy,sy7802.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/silergy,sy7802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silergy SY7802 1800mA Boost Charge Pump LED Driver
+
+maintainers:
+  - André Apitzsch <git@apitzsch.eu>
+
+description: |
+  The SY7802 is a current-regulated charge pump which can regulate two current
+  levels for Flash and Torch modes.
+
+  The SY7802 is a high-current synchronous boost converter with 2-channel
+  high side current sources. Each channel is able to deliver 900mA current.
+
+properties:
+  compatible:
+    enum:
+      - silergy,sy7802
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+    description: A connection to the 'EN' pin.
+
+  flash-gpios:
+    maxItems: 1
+    description: A connection to the 'FLEN' pin.
+
+  vin-supply:
+    description: Regulator providing power to the 'VIN' pin.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-1]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Index of the LED.
+        minimum: 0
+        maximum: 1
+
+      led-sources:
+        minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
+
+    required:
+      - reg
+      - led-sources
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash-led-controller@53 {
+            compatible = "silergy,sy7802";
+            reg = <0x53>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+            led@0 {
+                reg = <0>;
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_WHITE>;
+                led-sources = <0>, <1>;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/mailbox/mediatek,gce-props.yaml b/dts/upstream/Bindings/mailbox/mediatek,gce-props.yaml
new file mode 100644
index 00000000000..c25eed4606f
--- /dev/null
+++ b/dts/upstream/Bindings/mailbox/mediatek,gce-props.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Global Command Engine Common Properties
+
+maintainers:
+  - Houlong Wei <houlong.wei@mediatek.com>
+
+description:
+  The Global Command Engine (GCE) is an instruction based, multi-threaded,
+  single-core command dispatcher for MediaTek hardware. The Command Queue
+  (CMDQ) mailbox driver is a driver for GCE, implemented using the Linux
+  mailbox framework. It is used to receive messages from mailbox consumers
+  and configure GCE to execute the specified instruction set in the message.
+  We use mediatek,gce-mailbox.yaml to define the properties for CMDQ mailbox
+  driver. A device driver that uses the CMDQ driver to configure its hardware
+  registers is a mailbox consumer. The mailbox consumer can request a mailbox
+  channel corresponding to a GCE hardware thread to send a message, specifying
+  that the GCE thread to configure its hardware. The mailbox provider can also
+  reserve a mailbox channel to configure GCE hardware register by the specific
+  GCE thread. This binding defines the common GCE properties for both mailbox
+  provider and consumers.
+
+properties:
+  mediatek,gce-events:
+    description:
+      GCE has an event table in SRAM, consisting of 1024 event IDs (0~1023).
+      Each event ID has a boolean event value with the default value 0.
+      The property mediatek,gce-events is used to obtain the event IDs.
+      Some gce-events are hardware-bound and cannot be changed by software.
+      For instance, in MT8195, when VDO0_MUTEX is stream done, VDO_MUTEX will
+      send an event signal to GCE, setting the value of event ID 597 to 1.
+      Similarly, in MT8188, the value of event ID 574 will be set to 1 when
+      VOD0_MUTEX is stream done.
+      On the other hand, some gce-events are not hardware-bound and can be
+      changed by software. For example, in MT8188, we can set the value of
+      event ID 855, which is not bound to any hardware, to 1 when the driver
+      in the secure world completes a task. However, in MT8195, event ID 855
+      is already bound to VDEC_LAT1, so we need to select another event ID to
+      achieve the same purpose. This event ID can be any ID that is not bound
+      to any hardware and is not yet used in any software driver.
+      To determine if the event ID is bound to the hardware or used by a
+      software driver, refer to the GCE header
+      include/dt-bindings/gce/<chip>-gce.h of each chip.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 32
+
+additionalProperties: true
diff --git a/dts/upstream/Bindings/mailbox/qcom,cpucp-mbox.yaml b/dts/upstream/Bindings/mailbox/qcom,cpucp-mbox.yaml
new file mode 100644
index 00000000000..f7342d04bee
--- /dev/null
+++ b/dts/upstream/Bindings/mailbox/qcom,cpucp-mbox.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/qcom,cpucp-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUCP Mailbox Controller
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  The CPUSS Control Processor (CPUCP) mailbox controller enables communication
+  between AP and CPUCP by acting as a doorbell between them.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,x1e80100-cpucp-mbox
+
+  reg:
+    items:
+      - description: CPUCP rx register region
+      - description: CPUCP tx register region
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@17430000 {
+        compatible = "qcom,x1e80100-cpucp-mbox";
+        reg = <0x17430000 0x10000>, <0x18830000 0x10000>;
+        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <1>;
+    };
diff --git a/dts/upstream/Bindings/media/i2c/galaxycore,gc05a2.yaml b/dts/upstream/Bindings/media/i2c/galaxycore,gc05a2.yaml
new file mode 100644
index 00000000000..0e7a7b5ac89
--- /dev/null
+++ b/dts/upstream/Bindings/media/i2c/galaxycore,gc05a2.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc05a2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GalaxyCore gc05a2 1/5" 5M Pixel MIPI CSI-2 sensor
+
+maintainers:
+  - Zhi Mao <zhi.mao@mediatek.com>
+
+description:
+  The gc05a2 is a raw image sensor with an MIPI CSI-2 image data
+  interface and CCI (I2C compatible) control bus. The output format
+  is raw Bayer.
+
+properties:
+  compatible:
+    const: galaxycore,gc05a2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dovdd-supply: true
+
+  avdd-supply: true
+
+  dvdd-supply: true
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the RESETB pin.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@37 {
+            compatible =  "galaxycore,gc05a2";
+            reg = <0x37>;
+
+            clocks = <&gc05a2_clk>;
+
+            reset-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
+
+            avdd-supply = <&gc05a2_avdd>;
+            dovdd-supply = <&gc05a2_dovdd>;
+            dvdd-supply = <&gc05a2_dvdd>;
+
+            port {
+                sensor_out: endpoint {
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <448000000 224000000>;
+                    remote-endpoint = <&seninf_csi_port_1_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/upstream/Bindings/media/i2c/galaxycore,gc08a3.yaml b/dts/upstream/Bindings/media/i2c/galaxycore,gc08a3.yaml
new file mode 100644
index 00000000000..51b8ece09c7
--- /dev/null
+++ b/dts/upstream/Bindings/media/i2c/galaxycore,gc08a3.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc08a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GalaxyCore gc08a3 1/4" 8M Pixel MIPI CSI-2 sensor
+
+maintainers:
+  - Zhi Mao <zhi.mao@mediatek.com>
+
+description:
+  The gc08a3 is a raw image sensor with an MIPI CSI-2 image data
+  interface and CCI (I2C compatible) control bus. The output format
+  is raw Bayer.
+
+properties:
+  compatible:
+    const: galaxycore,gc08a3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dovdd-supply: true
+
+  avdd-supply: true
+
+  dvdd-supply: true
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the RESETB pin.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@31 {
+            compatible = "galaxycore,gc08a3";
+            reg = <0x31>;
+
+            clocks = <&gc08a3_clk>;
+
+            reset-gpios = <&pio 19 GPIO_ACTIVE_LOW>;
+
+            avdd-supply = <&gc08a3_avdd>;
+            dovdd-supply = <&gc08a3_dovdd>;
+            dvdd-supply = <&gc08a3_dvdd>;
+
+            port {
+                sensor_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <336000000 207000000>;
+                    remote-endpoint = <&seninf_csi_port_0_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/upstream/Bindings/media/i2c/maxim,max96714.yaml b/dts/upstream/Bindings/media/i2c/maxim,max96714.yaml
new file mode 100644
index 00000000000..3ace50e1192
--- /dev/null
+++ b/dts/upstream/Bindings/media/i2c/maxim,max96714.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX96714 GMSL2 to CSI-2 Deserializer
+
+maintainers:
+  - Julien Massot <julien.massot@collabora.com>
+
+description:
+  The MAX96714 deserializer converts GMSL2 serial inputs into MIPI
+  CSI-2 D-PHY formatted output. The device allows the GMSL2 link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96714 can connect to one
+  remotely located serializer using industry-standard coax or STP
+  interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
+  the MAX96714 can select individual video stream, while the tunnel mode forward all
+  the MIPI data received by the serializer.
+
+  The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction.
+  MAX96714F only supports a fixed rate of 3Gbps in the forward direction.
+
+properties:
+  compatible:
+    oneOf:
+      - const: maxim,max96714f
+      - items:
+          - enum:
+              - maxim,max96714
+          - const: maxim,max96714f
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      Specifier for the GPIO connected to the PWDNB pin.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: GMSL Input
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for GMSL2-Link port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 5
+
+              link-frequencies:
+                maxItems: 1
+
+            required:
+              - data-lanes
+
+    required:
+      - port@1
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-gate.yaml
+    unevaluatedProperties: false
+    description:
+      The MAX96714 will pass through and forward the I2C requests from the
+      incoming I2C bus over the GMSL2 link. Therefore it supports an i2c-gate
+      subnode to configure a serializer.
+
+  port0-poc-supply:
+    description: Regulator providing Power over Coax for the GMSL port
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        deserializer@28 {
+            compatible = "maxim,max96714f";
+            reg = <0x28>;
+            powerdown-gpios = <&main_gpio0 37 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    max96714_gmsl_in: endpoint {
+                        remote-endpoint = <&max96917f_gmsl_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    max96714_csi_out: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        link-frequencies = /bits/ 64 <400000000>;
+                        remote-endpoint = <&csi_in>;
+                    };
+                };
+            };
+
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                serializer@40 {
+                    compatible = "maxim,max96717f";
+                    reg = <0x40>;
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    #clock-cells = <0>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            max96717f_csi_in: endpoint {
+                                data-lanes = <1 2>;
+                                lane-polarities = <1 0 1>;
+                                remote-endpoint = <&sensor_out>;
+                            };
+                        };
+
+                        port@1 {
+                            reg = <1>;
+                            max96917f_gmsl_out: endpoint {
+                                remote-endpoint = <&max96714_gmsl_in>;
+                            };
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/media/i2c/maxim,max96717.yaml b/dts/upstream/Bindings/media/i2c/maxim,max96717.yaml
new file mode 100644
index 00000000000..d1e8ba6e368
--- /dev/null
+++ b/dts/upstream/Bindings/media/i2c/maxim,max96717.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96717.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX96717 CSI-2 to GMSL2 Serializer
+
+maintainers:
+  - Julien Massot <julien.massot@collabora.com>
+
+description:
+  The MAX96717 serializer converts MIPI CSI-2 D-PHY formatted input
+  into GMSL2 serial outputs. The device allows the GMSL2 link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96717 can connect to one
+  remotely located deserializer using industry-standard coax or STP
+  interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
+  the MAX96717 can select the MIPI datatype, while the tunnel mode forward all the MIPI
+  data received by the serializer.
+  The MAX96717 supports Reference Over Reverse (channel),
+  to generate a clock output for the sensor from the GMSL reverse channel.
+
+  The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction.
+  MAX96717F only supports a fixed rate of 3Gbps in the forward direction.
+
+properties:
+  compatible:
+    oneOf:
+      - const: maxim,max96717f
+      - items:
+          - enum:
+              - maxim,max96717
+          - const: maxim,max96717f
+
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is the GPIO pin number, second cell is the flags. The GPIO pin
+      number must be in range of [0, 10].
+
+  gpio-controller: true
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 5
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: GMSL Output port
+
+    required:
+      - port@1
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-gate.yaml
+    unevaluatedProperties: false
+    description:
+      The MAX96717 will forward the I2C requests from the
+      incoming GMSL2 link. Therefore, it supports an i2c-gate
+      subnode to configure a sensor.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        serializer: serializer@40 {
+            compatible = "maxim,max96717f";
+            reg = <0x40>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            #clock-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    max96717f_csi_in: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&sensor_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    max96917f_gmsl_out: endpoint {
+                        remote-endpoint = <&deser_gmsl_in>;
+                    };
+                };
+            };
+
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                sensor@10 {
+                    compatible = "st,st-vgxy61";
+                    reg = <0x10>;
+                    reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
+                    clocks = <&serializer>;
+                    VCORE-supply = <&v1v2>;
+                    VDDIO-supply = <&v1v8>;
+                    VANA-supply = <&v2v8>;
+                    port {
+                        sensor_out: endpoint {
+                            data-lanes = <1 2 3 4>;
+                            remote-endpoint = <&max96717f_csi_in>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/media/i2c/imx258.yaml b/dts/upstream/Bindings/media/i2c/sony,imx258.yaml
index 80d24220baa..c978abc0cdb 100644
--- a/dts/upstream/Bindings/media/i2c/imx258.yaml
+++ b/dts/upstream/Bindings/media/i2c/sony,imx258.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/i2c/imx258.yaml#
+$id: http://devicetree.org/schemas/media/i2c/sony,imx258.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sony IMX258 13 Mpixel CMOS Digital Image Sensor
@@ -13,11 +13,16 @@ description: |-
   IMX258 is a diagonal 5.867mm (Type 1/3.06) 13 Mega-pixel CMOS active pixel
   type stacked image sensor with a square pixel array of size 4208 x 3120. It
   is programmable through I2C interface.  Image data is sent through MIPI
-  CSI-2.
+  CSI-2. The sensor exists in two different models, a standard variant
+  (IMX258) and a variant with phase detection autofocus (IMX258-PDAF).
+  The camera module does not expose the model through registers, so the
+  exact model needs to be specified.
 
 properties:
   compatible:
-    const: sony,imx258
+    enum:
+      - sony,imx258
+      - sony,imx258-pdaf
 
   assigned-clocks: true
   assigned-clock-parents: true
diff --git a/dts/upstream/Bindings/media/i2c/sony,imx283.yaml b/dts/upstream/Bindings/media/i2c/sony,imx283.yaml
new file mode 100644
index 00000000000..e4f49f1435a
--- /dev/null
+++ b/dts/upstream/Bindings/media/i2c/sony,imx283.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Ideas on Board Oy
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx283.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX283 Sensor
+
+maintainers:
+  - Kieran Bingham <kieran.bingham@ideasonboard.com>
+  - Umang Jain <umang.jain@ideasonboard.com>
+
+description:
+  IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 5472H x 3648V. It is programmable through I2C interface. The
+  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+  sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx283
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Clock frequency from 6 to 24 MHz.
+    maxItems: 1
+
+  vadd-supply:
+    description: Analog power supply (2.9V)
+
+  vdd1-supply:
+    description: Interface power supply (1.8V)
+
+  vdd2-supply:
+    description: Digital power supply (1.2V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx283";
+            reg = <0x1a>;
+            clocks = <&imx283_clk>;
+
+            assigned-clocks = <&imx283_clk>;
+            assigned-clock-parents = <&imx283_clk_parent>;
+            assigned-clock-rates = <12000000>;
+
+            vadd-supply = <&camera_vadd_2v9>;
+            vdd1-supply = <&camera_vdd1_1v8>;
+            vdd2-supply = <&camera_vdd2_1v2>;
+
+            port {
+                imx283: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <360000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/media/img,e5010-jpeg-enc.yaml b/dts/upstream/Bindings/media/img,e5010-jpeg-enc.yaml
new file mode 100644
index 00000000000..085020cb9e6
--- /dev/null
+++ b/dts/upstream/Bindings/media/img,e5010-jpeg-enc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination E5010 JPEG Encoder
+
+maintainers:
+  - Devarsh Thakkar <devarsht@ti.com>
+
+description: |
+  The E5010 is a JPEG encoder from Imagination Technologies implemented on
+  TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422
+  inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to
+  8Kx8K resolution.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: ti,am62a-jpeg-enc
+          - const: img,e5010-jpeg-enc
+      - const: img,e5010-jpeg-enc
+
+  reg:
+    items:
+      - description: The E5010 core register region
+      - description: The E5010 mmu register region
+
+  reg-names:
+    items:
+      - const: core
+      - const: mmu
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      jpeg-encoder@fd20000 {
+          compatible = "img,e5010-jpeg-enc";
+          reg = <0x00 0xfd20000 0x00 0x100>,
+                <0x00 0xfd20200 0x00 0x200>;
+          reg-names = "core", "mmu";
+          clocks = <&k3_clks 201 0>;
+          power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+          interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/dts/upstream/Bindings/media/mediatek,mdp3-rdma.yaml b/dts/upstream/Bindings/media/mediatek,mdp3-rdma.yaml
index 59db8306485..18603f6c5e0 100644
--- a/dts/upstream/Bindings/media/mediatek,mdp3-rdma.yaml
+++ b/dts/upstream/Bindings/media/mediatek,mdp3-rdma.yaml
@@ -23,6 +23,7 @@ properties:
     oneOf:
       - enum:
           - mediatek,mt8183-mdp3-rdma
+          - mediatek,mt8188-mdp3-rdma
           - mediatek,mt8195-mdp3-rdma
           - mediatek,mt8195-vdo1-rdma
       - items:
diff --git a/dts/upstream/Bindings/media/mediatek,mt7622-cir.yaml b/dts/upstream/Bindings/media/mediatek,mt7622-cir.yaml
new file mode 100644
index 00000000000..c01210e053f
--- /dev/null
+++ b/dts/upstream/Bindings/media/mediatek,mt7622-cir.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Consumer Infrared Receiver on-SoC Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-cir
+      - mediatek,mt7623-cir
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk
+      - const: bus
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ir@10013000 {
+        compatible = "mediatek,mt7623-cir";
+        reg = <0x10013000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&infracfg CLK_INFRA_IRRX>, <&topckgen CLK_TOP_AXI_SEL>;
+        clock-names = "clk", "bus";
+        linux,rc-map-name = "rc-rc6-mce";
+    };
diff --git a/dts/upstream/Bindings/media/mtk-cir.txt b/dts/upstream/Bindings/media/mtk-cir.txt
deleted file mode 100644
index 5e18087ce11..00000000000
--- a/dts/upstream/Bindings/media/mtk-cir.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Device-Tree bindings for Mediatek consumer IR controller
-found in Mediatek SoC family
-
-Required properties:
-- compatible	    : Should be
-			"mediatek,mt7623-cir": for MT7623 SoC
-			"mediatek,mt7622-cir": for MT7622 SoC
-- clocks	    : list of clock specifiers, corresponding to
-		      entries in clock-names property;
-- clock-names	    : should contain
-			- "clk" entries: for MT7623 SoC
-			- "clk", "bus" entries: for MT7622 SoC
-- interrupts	    : should contain IR IRQ number;
-- reg		    : should contain IO map address for IR.
-
-Optional properties:
-- linux,rc-map-name : see rc.txt file in the same directory.
-
-Example:
-
-cir: cir@10013000 {
-	compatible = "mediatek,mt7623-cir";
-	reg = <0 0x10013000 0 0x1000>;
-	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&infracfg CLK_INFRA_IRRX>;
-	clock-names = "clk";
-	linux,rc-map-name = "rc-rc6-mce";
-};
diff --git a/dts/upstream/Bindings/media/qcom,msm8996-venus.yaml b/dts/upstream/Bindings/media/qcom,msm8996-venus.yaml
index 3a4d817e544..56c16458e3b 100644
--- a/dts/upstream/Bindings/media/qcom,msm8996-venus.yaml
+++ b/dts/upstream/Bindings/media/qcom,msm8996-venus.yaml
@@ -18,7 +18,9 @@ allOf:
 
 properties:
   compatible:
-    const: qcom,msm8996-venus
+    enum:
+      - qcom,msm8996-venus
+      - qcom,msm8998-venus
 
   power-domains:
     maxItems: 1
diff --git a/dts/upstream/Bindings/media/raspberrypi,pispbe.yaml b/dts/upstream/Bindings/media/raspberrypi,pispbe.yaml
new file mode 100644
index 00000000000..1fc62a1d8ed
--- /dev/null
+++ b/dts/upstream/Bindings/media/raspberrypi,pispbe.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/raspberrypi,pispbe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi PiSP Image Signal Processor (ISP) Back End
+
+maintainers:
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+description: |
+  The Raspberry Pi PiSP Image Signal Processor (ISP) Back End is an image
+  processor that fetches images in Bayer or Grayscale format from DRAM memory
+  in tiles and produces images consumable by applications.
+
+  The full ISP documentation is available at
+  https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm2712-pispbe
+      - const: raspberrypi,pispbe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp@880000  {
+             compatible = "brcm,bcm2712-pispbe", "raspberrypi,pispbe";
+             reg = <0x10 0x00880000 0x0 0x4000>;
+             interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+             clocks = <&firmware_clocks 7>;
+             iommus = <&iommu2>;
+        };
+    };
diff --git a/dts/upstream/Bindings/media/rc.yaml b/dts/upstream/Bindings/media/rc.yaml
index 7bbe580c80f..dedc5a4b81e 100644
--- a/dts/upstream/Bindings/media/rc.yaml
+++ b/dts/upstream/Bindings/media/rc.yaml
@@ -103,6 +103,7 @@ properties:
       - rc-msi-digivox-iii
       - rc-msi-tvanywhere
       - rc-msi-tvanywhere-plus
+      - rc-mygica-utv3
       - rc-nebula
       - rc-nec-terratec-cinergy-xs
       - rc-norwood
diff --git a/dts/upstream/Bindings/media/renesas,rzg2l-cru.yaml b/dts/upstream/Bindings/media/renesas,rzg2l-cru.yaml
index 1e72b8808d2..bc124512702 100644
--- a/dts/upstream/Bindings/media/renesas,rzg2l-cru.yaml
+++ b/dts/upstream/Bindings/media/renesas,rzg2l-cru.yaml
@@ -19,6 +19,7 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,r9a07g043-cru       # RZ/G2UL
           - renesas,r9a07g044-cru       # RZ/G2{L,LC}
           - renesas,r9a07g054-cru       # RZ/V2L
       - const: renesas,rzg2l-cru
@@ -87,10 +88,6 @@ properties:
           Input port node, describing the Image Processing module connected to the
           CSI-2 receiver.
 
-    required:
-      - port@0
-      - port@1
-
 required:
   - compatible
   - reg
@@ -102,6 +99,36 @@ required:
   - reset-names
   - power-domains
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g044-cru
+              - renesas,r9a07g054-cru
+    then:
+      properties:
+        ports:
+          required:
+            - port@0
+            - port@1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g043-cru
+    then:
+      properties:
+        ports:
+          properties:
+            port@0: false
+
+          required:
+            - port@1
+
 additionalProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/media/renesas,rzg2l-csi2.yaml b/dts/upstream/Bindings/media/renesas,rzg2l-csi2.yaml
index 67eea2ac1d2..7faa12fecd5 100644
--- a/dts/upstream/Bindings/media/renesas,rzg2l-csi2.yaml
+++ b/dts/upstream/Bindings/media/renesas,rzg2l-csi2.yaml
@@ -19,6 +19,7 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,r9a07g043-csi2       # RZ/G2UL
           - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
           - renesas,r9a07g054-csi2       # RZ/V2L
       - const: renesas,rzg2l-csi2
diff --git a/dts/upstream/Bindings/media/rockchip-rga.yaml b/dts/upstream/Bindings/media/rockchip-rga.yaml
index ea234222240..ac17cda6519 100644
--- a/dts/upstream/Bindings/media/rockchip-rga.yaml
+++ b/dts/upstream/Bindings/media/rockchip-rga.yaml
@@ -24,6 +24,7 @@ properties:
           - enum:
               - rockchip,rk3228-rga
               - rockchip,rk3568-rga
+              - rockchip,rk3588-rga
           - const: rockchip,rk3288-rga
 
   reg:
diff --git a/dts/upstream/Bindings/memory-controllers/fsl/fsl,ifc.yaml b/dts/upstream/Bindings/memory-controllers/fsl/fsl,ifc.yaml
index 3be1db30bf4..d1c3421bee1 100644
--- a/dts/upstream/Bindings/memory-controllers/fsl/fsl,ifc.yaml
+++ b/dts/upstream/Bindings/memory-controllers/fsl/fsl,ifc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: FSL/NXP Integrated Flash Controller
 
 maintainers:
-  - Li Yang <leoyang.li@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
 
 description: |
   NXP's integrated flash controller (IFC) is an advanced version of the
diff --git a/dts/upstream/Bindings/memory-controllers/fsl/mmdc.yaml b/dts/upstream/Bindings/memory-controllers/fsl/mmdc.yaml
index 71547eee991..5447f1ddded 100644
--- a/dts/upstream/Bindings/memory-controllers/fsl/mmdc.yaml
+++ b/dts/upstream/Bindings/memory-controllers/fsl/mmdc.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale Multi Mode DDR controller (MMDC)
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 properties:
   compatible:
diff --git a/dts/upstream/Bindings/mfd/marvell,88pm886-a1.yaml b/dts/upstream/Bindings/mfd/marvell,88pm886-a1.yaml
new file mode 100644
index 00000000000..d6a71c912b7
--- /dev/null
+++ b/dts/upstream/Bindings/mfd/marvell,88pm886-a1.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/marvell,88pm886-a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell 88PM886 PMIC core
+
+maintainers:
+  - Karel Balej <balejk@matfyz.cz>
+
+description:
+  Marvell 88PM886 is a PMIC providing several functions such as onkey,
+  regulators or battery and charger.
+
+properties:
+  compatible:
+    const: marvell,88pm886-a1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo(1[0-6]|[1-9])|buck[1-5])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        description: LDO or buck regulator.
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@30 {
+        compatible = "marvell,88pm886-a1";
+        reg = <0x30>;
+        interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+        wakeup-source;
+
+        regulators {
+          ldo2: ldo2 {
+            regulator-min-microvolt = <3100000>;
+            regulator-max-microvolt = <3300000>;
+          };
+
+          ldo15: ldo15 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+          };
+
+          buck2: buck2 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+          };
+        };
+      };
+    };
+...
diff --git a/dts/upstream/Bindings/mfd/mediatek,mt8195-scpsys.yaml b/dts/upstream/Bindings/mfd/mediatek,mt8195-scpsys.yaml
index c8c4812fffe..768390b9268 100644
--- a/dts/upstream/Bindings/mfd/mediatek,mt8195-scpsys.yaml
+++ b/dts/upstream/Bindings/mfd/mediatek,mt8195-scpsys.yaml
@@ -22,8 +22,10 @@ properties:
           - mediatek,mt8173-scpsys
           - mediatek,mt8183-scpsys
           - mediatek,mt8186-scpsys
+          - mediatek,mt8188-scpsys
           - mediatek,mt8192-scpsys
           - mediatek,mt8195-scpsys
+          - mediatek,mt8365-scpsys
       - const: syscon
       - const: simple-mfd
 
diff --git a/dts/upstream/Bindings/mfd/mfd.txt b/dts/upstream/Bindings/mfd/mfd.txt
index 336c0495c8a..b938fa26d2c 100644
--- a/dts/upstream/Bindings/mfd/mfd.txt
+++ b/dts/upstream/Bindings/mfd/mfd.txt
@@ -17,13 +17,14 @@ A typical MFD can be:
 
 Optional properties:
 
-- compatible : "simple-mfd" - this signifies that the operating system should
-  consider all subnodes of the MFD device as separate devices akin to how
-  "simple-bus" indicates when to see subnodes as children for a simple
-  memory-mapped bus. For more complex devices, when the nexus driver has to
-  probe registers to figure out what child devices exist etc, this should not
-  be used. In the latter case the child devices will be determined by the
-  operating system.
+- compatible : "simple-mfd" - this signifies that the operating system
+  should consider all subnodes of the MFD device as separate and independent
+  devices, so not needing any resources to be provided by the parent device.
+  Similarly to how "simple-bus" indicates when to see subnodes as children for
+  a simple memory-mapped bus.
+  For more complex devices, when the nexus driver has to probe registers to
+  figure out what child devices exist etc, this should not be used. In the
+  latter case the child devices will be determined by the operating system.
 
 - ranges: Describes the address mapping relationship to the parent. Should set
   the child's base address to 0, the physical address within parent's address
diff --git a/dts/upstream/Bindings/mfd/qcom,pm8008.yaml b/dts/upstream/Bindings/mfd/qcom,pm8008.yaml
index 0c75d8bde56..0c6e1870db1 100644
--- a/dts/upstream/Bindings/mfd/qcom,pm8008.yaml
+++ b/dts/upstream/Bindings/mfd/qcom,pm8008.yaml
@@ -19,110 +19,136 @@ properties:
     const: qcom,pm8008
 
   reg:
-    description:
-      I2C slave address.
-
     maxItems: 1
 
   interrupts:
     maxItems: 1
 
-    description: Parent interrupt.
+  reset-gpios:
+    maxItems: 1
+
+  vdd-l1-l2-supply: true
+  vdd-l3-l4-supply: true
+  vdd-l5-supply: true
+  vdd-l6-supply: true
+  vdd-l7-supply: true
 
-  "#interrupt-cells":
+  gpio-controller: true
+
+  "#gpio-cells":
     const: 2
 
-    description: |
-      The first cell is the IRQ number, the second cell is the IRQ trigger
-      flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
+  gpio-ranges:
+    maxItems: 1
 
   interrupt-controller: true
 
-  "#address-cells":
-    const: 1
+  "#interrupt-cells":
+    const: 2
 
-  "#size-cells":
+  "#thermal-sensor-cells":
     const: 0
 
-patternProperties:
-  "^gpio@[0-9a-f]+$":
+  pinctrl:
     type: object
+    additionalProperties: false
+    patternProperties:
+      "-state$":
+        type: object
 
-    description: |
-      The GPIO peripheral. This node may be specified twice, one for each GPIO.
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,pm8008-gpio
-          - const: qcom,spmi-gpio
-
-      reg:
-        description: Peripheral address of one of the two GPIO peripherals.
-        maxItems: 1
-
-      gpio-controller: true
-
-      gpio-ranges:
-        maxItems: 1
+        allOf:
+          - $ref: /schemas/pinctrl/pinmux-node.yaml
+          - $ref: /schemas/pinctrl/pincfg-node.yaml
 
-      interrupt-controller: true
+        properties:
+          pins:
+            items:
+              pattern: "^gpio[12]$"
 
-      "#interrupt-cells":
-        const: 2
+          function:
+            items:
+              - enum:
+                  - normal
 
-      "#gpio-cells":
-        const: 2
+        required:
+          - pins
+          - function
 
-    required:
-      - compatible
-      - reg
-      - gpio-controller
-      - interrupt-controller
-      - "#gpio-cells"
-      - gpio-ranges
-      - "#interrupt-cells"
+        additionalProperties: false
 
+  regulators:
+    type: object
     additionalProperties: false
+    patternProperties:
+      "^ldo[1-7]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
 
 required:
   - compatible
   - reg
   - interrupts
-  - "#address-cells"
-  - "#size-cells"
+  - vdd-l1-l2-supply
+  - vdd-l3-l4-supply
+  - vdd-l5-supply
+  - vdd-l6-supply
+  - vdd-l7-supply
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+  - interrupt-controller
   - "#interrupt-cells"
+  - "#thermal-sensor-cells"
 
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/mfd/qcom-pm8008.h>
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
-      pmic@8 {
+      pm8008: pmic@8 {
         compatible = "qcom,pm8008";
         reg = <0x8>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        interrupt-controller;
-        #interrupt-cells = <2>;
 
         interrupt-parent = <&tlmm>;
         interrupts = <32 IRQ_TYPE_EDGE_RISING>;
 
-        pm8008_gpios: gpio@c000 {
-          compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
-          reg = <0xc000>;
-          gpio-controller;
-          gpio-ranges = <&pm8008_gpios 0 0 2>;
-          #gpio-cells = <2>;
-          interrupt-controller;
-          #interrupt-cells = <2>;
+        reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+
+        vdd-l1-l2-supply = <&vreg_s8b_1p2>;
+        vdd-l3-l4-supply = <&vreg_s1b_1p8>;
+        vdd-l5-supply = <&vreg_bob>;
+        vdd-l6-supply = <&vreg_bob>;
+        vdd-l7-supply = <&vreg_bob>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pm8008 0 0 2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        #thermal-sensor-cells = <0>;
+
+        pinctrl {
+          gpio-keys-state {
+            pins = "gpio1";
+            function = "normal";
+          };
+        };
+
+        regulators {
+          ldo1 {
+            regulator-name = "vreg_l1";
+            regulator-min-microvolt = <950000>;
+            regulator-max-microvolt = <1300000>;
+          };
         };
       };
     };
diff --git a/dts/upstream/Bindings/mfd/qcom,spmi-pmic.yaml b/dts/upstream/Bindings/mfd/qcom,spmi-pmic.yaml
index b7f01cbb8ff..a2b2fbf77d5 100644
--- a/dts/upstream/Bindings/mfd/qcom,spmi-pmic.yaml
+++ b/dts/upstream/Bindings/mfd/qcom,spmi-pmic.yaml
@@ -75,6 +75,7 @@ properties:
           - qcom,pma8084
           - qcom,pmc8180
           - qcom,pmc8180c
+          - qcom,pmc8380
           - qcom,pmd9635
           - qcom,pmi632
           - qcom,pmi8950
@@ -95,6 +96,7 @@ properties:
           - qcom,pmx65
           - qcom,pmx75
           - qcom,smb2351
+          - qcom,smb2360
       - const: qcom,spmi-pmic
 
   reg:
diff --git a/dts/upstream/Bindings/mfd/rockchip,rk809.yaml b/dts/upstream/Bindings/mfd/rockchip,rk809.yaml
deleted file mode 100644
index 839c0521f1e..00000000000
--- a/dts/upstream/Bindings/mfd/rockchip,rk809.yaml
+++ /dev/null
@@ -1,288 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: RK809 Power Management Integrated Circuit
-
-maintainers:
-  - Chris Zhong <zyw@rock-chips.com>
-  - Zhang Qing <zhangqing@rock-chips.com>
-
-description: |
-  Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
-  that includes regulators, an RTC, and power button.
-
-properties:
-  compatible:
-    enum:
-      - rockchip,rk809
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
-  '#clock-cells':
-    description: |
-      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
-    minimum: 0
-    maximum: 1
-
-  clock-output-names:
-    description:
-      From common clock binding to override the default output clock name.
-
-  rockchip,system-power-controller:
-    type: boolean
-    deprecated: true
-    description:
-      Telling whether or not this PMIC is controlling the system power.
-
-  system-power-controller: true
-
-  wakeup-source:
-    type: boolean
-    description:
-      Device can be used as a wakeup source.
-
-  vcc1-supply:
-    description:
-      The input supply for DCDC_REG1.
-
-  vcc2-supply:
-    description:
-      The input supply for DCDC_REG2.
-
-  vcc3-supply:
-    description:
-      The input supply for DCDC_REG3.
-
-  vcc4-supply:
-    description:
-      The input supply for DCDC_REG4.
-
-  vcc5-supply:
-    description:
-      The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
-
-  vcc6-supply:
-    description:
-      The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
-
-  vcc7-supply:
-    description:
-      The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
-
-  vcc8-supply:
-    description:
-      The input supply for SWITCH_REG1.
-
-  vcc9-supply:
-    description:
-      The input supply for DCDC_REG5 and SWITCH_REG2.
-
-  regulators:
-    type: object
-    patternProperties:
-      "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$":
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
-    unevaluatedProperties: false
-
-allOf:
-  - if:
-      properties:
-        '#clock-cells':
-          const: 0
-
-    then:
-      properties:
-        clock-output-names:
-          maxItems: 1
-
-    else:
-      properties:
-        clock-output-names:
-          maxItems: 2
-
-required:
-  - compatible
-  - reg
-  - interrupts
-  - "#clock-cells"
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/pinctrl/rockchip.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
-    #include <dt-bindings/gpio/gpio.h>
-    i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        rk808: pmic@1b {
-            compatible = "rockchip,rk808";
-            reg = <0x1b>;
-            #clock-cells = <1>;
-            clock-output-names = "xin32k", "rk808-clkout2";
-            interrupt-parent = <&gpio3>;
-            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-            pinctrl-names = "default";
-            pinctrl-0 = <&pmic_int_l_pin>;
-            rockchip,system-power-controller;
-            wakeup-source;
-
-            vcc1-supply = <&vcc_sysin>;
-            vcc2-supply = <&vcc_sysin>;
-            vcc3-supply = <&vcc_sysin>;
-            vcc4-supply = <&vcc_sysin>;
-            vcc6-supply = <&vcc_sysin>;
-            vcc7-supply = <&vcc_sysin>;
-            vcc8-supply = <&vcc3v3_sys>;
-            vcc9-supply = <&vcc_sysin>;
-            vcc10-supply = <&vcc_sysin>;
-            vcc11-supply = <&vcc_sysin>;
-            vcc12-supply = <&vcc3v3_sys>;
-
-            regulators {
-                vdd_center: DCDC_REG1 {
-                    regulator-name = "vdd_center";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-min-microvolt = <750000>;
-                    regulator-max-microvolt = <1350000>;
-                    regulator-ramp-delay = <6001>;
-                    regulator-state-mem {
-                        regulator-off-in-suspend;
-                    };
-                };
-
-                vdd_cpu_l: DCDC_REG2 {
-                    regulator-name = "vdd_cpu_l";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-min-microvolt = <750000>;
-                    regulator-max-microvolt = <1350000>;
-                    regulator-ramp-delay = <6001>;
-                    regulator-state-mem {
-                        regulator-off-in-suspend;
-                    };
-                };
-
-                vcc_ddr: DCDC_REG3 {
-                    regulator-name = "vcc_ddr";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-state-mem {
-                        regulator-on-in-suspend;
-                    };
-                };
-
-                vcc_1v8: vcc_wl: DCDC_REG4 {
-                    regulator-name = "vcc_1v8";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-min-microvolt = <1800000>;
-                    regulator-max-microvolt = <1800000>;
-                    regulator-state-mem {
-                        regulator-on-in-suspend;
-                        regulator-suspend-microvolt = <1800000>;
-                    };
-                };
-
-                vcc1v8_pmupll: LDO_REG3 {
-                    regulator-name = "vcc1v8_pmupll";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-min-microvolt = <1800000>;
-                    regulator-max-microvolt = <1800000>;
-                    regulator-state-mem {
-                        regulator-on-in-suspend;
-                        regulator-suspend-microvolt = <1800000>;
-                    };
-                };
-
-                vcc_sdio: LDO_REG4 {
-                    regulator-name = "vcc_sdio";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-min-microvolt = <1800000>;
-                    regulator-max-microvolt = <3000000>;
-                    regulator-state-mem {
-                        regulator-on-in-suspend;
-                        regulator-suspend-microvolt = <3000000>;
-                    };
-                };
-
-                vcca3v0_codec: LDO_REG5 {
-                    regulator-name = "vcca3v0_codec";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-min-microvolt = <3000000>;
-                    regulator-max-microvolt = <3000000>;
-                    regulator-state-mem {
-                        regulator-off-in-suspend;
-                    };
-                };
-
-                vcc_1v5: LDO_REG6 {
-                    regulator-name = "vcc_1v5";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-min-microvolt = <1500000>;
-                    regulator-max-microvolt = <1500000>;
-                    regulator-state-mem {
-                        regulator-on-in-suspend;
-                        regulator-suspend-microvolt = <1500000>;
-                    };
-                };
-
-                vcca1v8_codec: LDO_REG7 {
-                    regulator-name = "vcca1v8_codec";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-min-microvolt = <1800000>;
-                    regulator-max-microvolt = <1800000>;
-                    regulator-state-mem {
-                        regulator-off-in-suspend;
-                    };
-                };
-
-                vcc_3v0: LDO_REG8 {
-                    regulator-name = "vcc_3v0";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-min-microvolt = <3000000>;
-                    regulator-max-microvolt = <3000000>;
-                    regulator-state-mem {
-                        regulator-on-in-suspend;
-                        regulator-suspend-microvolt = <3000000>;
-                    };
-                };
-
-                vcc3v3_s3: SWITCH_REG1 {
-                    regulator-name = "vcc3v3_s3";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-state-mem {
-                        regulator-off-in-suspend;
-                    };
-                };
-
-                vcc3v3_s0: SWITCH_REG2 {
-                    regulator-name = "vcc3v3_s0";
-                    regulator-always-on;
-                    regulator-boot-on;
-                    regulator-state-mem {
-                        regulator-off-in-suspend;
-                    };
-                };
-            };
-        };
-    };
diff --git a/dts/upstream/Bindings/mfd/rockchip,rk817.yaml b/dts/upstream/Bindings/mfd/rockchip,rk817.yaml
index 8c2fd0fabb9..2cb6d176a84 100644
--- a/dts/upstream/Bindings/mfd/rockchip,rk817.yaml
+++ b/dts/upstream/Bindings/mfd/rockchip,rk817.yaml
@@ -4,20 +4,21 @@
 $id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RK817 Power Management Integrated Circuit
+title: RK809/RK817 Power Management Integrated Circuit
 
 maintainers:
   - Chris Zhong <zyw@rock-chips.com>
   - Zhang Qing <zhangqing@rock-chips.com>
 
 description: |
-  Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD
-  that includes regulators, an RTC, a power button, an audio codec, and a
-  battery charger manager.
+  Rockchip RK809/RK817 series PMIC. This device consists of an i2c controlled
+  MFD that includes regulators, an RTC, a power button and an audio codec.
+  The RK817 variant also provides a battery charger manager.
 
 properties:
   compatible:
     enum:
+      - rockchip,rk809
       - rockchip,rk817
 
   reg:
@@ -32,6 +33,13 @@ properties:
     minimum: 0
     maximum: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
   clock-output-names:
     description:
       From common clock binding to override the default output clock name.
@@ -42,6 +50,9 @@ properties:
     description:
       Telling whether or not this PMIC is controlling the system power.
 
+  '#sound-dai-cells':
+    const: 0
+
   system-power-controller: true
 
   wakeup-source:
@@ -79,41 +90,22 @@ properties:
 
   vcc8-supply:
     description:
-      The input supply for BOOST.
+      The input supply for BOOST on RK817, or for SWITCH_REG2 on RK809.
 
   vcc9-supply:
     description:
-      The input supply for OTG_SWITCH.
+      The input supply for OTG_SWITCH on RK817,
+      or for DCDC_REG5 and SWITCH_REG1 on RK809.
 
   regulators:
     type: object
     patternProperties:
-      "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
-        type: object
+      "^(LDO_REG[1-9]|DCDC_REG[1-5]|BOOST|OTG_SWITCH|SWITCH_REG[1-2])$":
+        $ref: /schemas/regulator/regulator.yaml
         unevaluatedProperties: false
-        $ref: /schemas/regulator/regulator.yaml#
-    unevaluatedProperties: false
-
-  clocks:
-    description:
-      The input clock for the audio codec.
-
-  clock-names:
-    description:
-      The clock name for the codec clock.
-    items:
-      - const: mclk
-
-  '#sound-dai-cells':
-    description:
-      Needed for the interpretation of sound dais.
-    const: 0
+    additionalProperties: false
 
   codec:
-    description: |
-      The child node for the codec to hold additional properties. If no
-      additional properties are required for the codec, this node can be
-      omitted.
     type: object
     additionalProperties: false
     properties:
@@ -123,9 +115,6 @@ properties:
           Describes if the microphone uses differential mode.
 
   charger:
-    description: |
-      The child node for the charger to hold additional properties. If a
-      battery is not in use, this node can be omitted.
     type: object
     $ref: /schemas/power/supply/power-supply.yaml
 
@@ -168,6 +157,7 @@ properties:
     additionalProperties: false
 
 allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
   - if:
       properties:
         '#clock-cells':
@@ -183,6 +173,22 @@ allOf:
         clock-output-names:
           maxItems: 2
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk817
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(DCDC_REG5|SWITCH_REG[1-2])$": false
+    else:
+      properties:
+        regulators:
+          patternProperties:
+            "^(BOOST|OTG_SWITCH)$": false
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/mfd/rohm,bd96801-pmic.yaml b/dts/upstream/Bindings/mfd/rohm,bd96801-pmic.yaml
new file mode 100644
index 00000000000..d381125a0a1
--- /dev/null
+++ b/dts/upstream/Bindings/mfd/rohm,bd96801-pmic.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd96801-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Scalable Power Management Integrated Circuit
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description:
+  BD96801 is an automotive grade single-chip power management IC.
+  It integrates 4 buck converters and 3 LDOs with safety features like
+  over-/under voltage and over current detection and a watchdog.
+
+properties:
+  compatible:
+    const: rohm,bd96801
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
+      for fatal IRQs which will cause the PMIC to shut down power outputs.
+      In many systems this will shut down the SoC contolling the PMIC and
+      connecting/handling the errb can be omitted. However, there are cases
+      where the SoC is not powered by the PMIC or has a short time backup
+      energy to handle shutdown of critical hardware. In that case it may be
+      useful to connect the errb and handle errb events.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [intb, errb]
+      - const: errb
+
+  rohm,hw-timeout-ms:
+    description:
+      Watchdog timeout value(s). First walue is timeout limit. Second value is
+      optional value for 'too early' watchdog ping if window timeout mode is
+      to be used.
+    minItems: 1
+    maxItems: 2
+
+  rohm,wdg-action:
+    description:
+      Whether the watchdog failure must turn off the regulator power outputs or
+      just toggle the INTB line.
+    enum:
+      - prstb
+      - intb-only
+
+  timeout-sec:
+    maxItems: 2
+
+  regulators:
+    $ref: /schemas/regulator/rohm,bd96801-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@60 {
+            reg = <0x60>;
+            compatible = "rohm,bd96801";
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>, <6 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "intb", "errb";
+
+            regulators {
+                buck1 {
+                    regulator-name = "buck1";
+                    regulator-ramp-delay = <1250>;
+                    /* 0.5V min INITIAL - 150 mV tune */
+                    regulator-min-microvolt = <350000>;
+                    /* 3.3V + 150mV tune */
+                    regulator-max-microvolt = <3450000>;
+
+                    /* These can be set only when PMIC is in STBY */
+                    rohm,initial-voltage-microvolt = <500000>;
+                    regulator-ov-error-microvolt = <230000>;
+                    regulator-uv-error-microvolt = <230000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <0>;
+                };
+                buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <350000>;
+                    regulator-max-microvolt = <3450000>;
+
+                    rohm,initial-voltage-microvolt = <3000000>;
+                    regulator-ov-error-microvolt = <18000>;
+                    regulator-uv-error-microvolt = <18000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <1>;
+                };
+                buck3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <350000>;
+                    regulator-max-microvolt = <3450000>;
+
+                    rohm,initial-voltage-microvolt = <600000>;
+                    regulator-ov-warn-microvolt = <18000>;
+                    regulator-uv-warn-microvolt = <18000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-error-kelvin = <0>;
+                };
+                buck4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <350000>;
+                    regulator-max-microvolt = <3450000>;
+
+                    rohm,initial-voltage-microvolt = <600000>;
+                    regulator-ov-warn-microvolt = <18000>;
+                    regulator-uv-warn-microvolt = <18000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-error-kelvin = <0>;
+                };
+                ldo5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <3300000>;
+
+                    rohm,initial-voltage-microvolt = <500000>;
+                    regulator-ov-error-microvolt = <36000>;
+                    regulator-uv-error-microvolt = <34000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <0>;
+                };
+                ldo6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <3300000>;
+
+                    rohm,initial-voltage-microvolt = <300000>;
+                    regulator-ov-error-microvolt = <36000>;
+                    regulator-uv-error-microvolt = <34000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <0>;
+                };
+                ldo7 {
+                    regulator-name = "ldo7";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <3300000>;
+
+                    rohm,initial-voltage-microvolt = <500000>;
+                    regulator-ov-error-microvolt = <36000>;
+                    regulator-uv-error-microvolt = <34000>;
+                    regulator-temp-protection-kelvin = <1>;
+                    regulator-temp-warn-kelvin = <0>;
+                };
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/mfd/syscon-common.yaml b/dts/upstream/Bindings/mfd/syscon-common.yaml
new file mode 100644
index 00000000000..451cbad467a
--- /dev/null
+++ b/dts/upstream/Bindings/mfd/syscon-common.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/syscon-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Controller Registers R/W Common Properties
+
+description:
+  System controller node represents a register region containing a set
+  of miscellaneous registers. The registers are not cohesive enough to
+  represent as any specific type of device. The typical use-case is
+  for some other node's driver, or platform-specific code, to acquire
+  a reference to the syscon node (e.g. by phandle, node path, or
+  search using a specific compatible value), interrogate the node (or
+  associated OS driver) to determine the location of the registers,
+  and access the registers directly.
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: syscon
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    contains:
+      const: syscon
+    minItems: 2
+    maxItems: 5  # Should be enough
+
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    description:
+      The size (in bytes) of the IO accesses that should be performed
+      on the device.
+    enum: [1, 2, 4, 8]
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: simple-mfd
+    then:
+      properties:
+        compatible:
+          minItems: 3
+          maxItems: 5
+
+additionalProperties: true
+
+examples:
+  - |
+    syscon: syscon@1c00000 {
+        compatible = "allwinner,sun8i-h3-system-controller", "syscon";
+        reg = <0x01c00000 0x1000>;
+    };
+...
diff --git a/dts/upstream/Bindings/mfd/syscon.yaml b/dts/upstream/Bindings/mfd/syscon.yaml
index 7ed12a938ba..9dc594ea365 100644
--- a/dts/upstream/Bindings/mfd/syscon.yaml
+++ b/dts/upstream/Bindings/mfd/syscon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/syscon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: System Controller Registers R/W
+title: System Controller Devices
 
 description: |
   System controller node represents a register region containing a set
@@ -19,121 +19,213 @@ description: |
 maintainers:
   - Lee Jones <lee@kernel.org>
 
+# Need a select with all compatibles listed for compatibility with older
+# dtschema (<2024.02), so this will not be selected for other schemas having
+# syscon fallback.
 select:
   properties:
     compatible:
       contains:
         enum:
-          - syscon
-
+          - al,alpine-sysfabric-servic
+          - allwinner,sun8i-a83t-system-controller
+          - allwinner,sun8i-h3-system-controller
+          - allwinner,sun8i-v3s-system-controller
+          - allwinner,sun50i-a64-system-controller
+          - altr,l3regs
+          - altr,sdr-ctl
+          - amd,pensando-elba-syscon
+          - amlogic,meson-mx-assist
+          - amlogic,meson-mx-bootrom
+          - amlogic,meson8-analog-top
+          - amlogic,meson8b-analog-top
+          - amlogic,meson8-pmu
+          - amlogic,meson8b-pmu
+          - apm,merlin-poweroff-mailbox
+          - apm,mustang-poweroff-mailbox
+          - apm,xgene-csw
+          - apm,xgene-efuse
+          - apm,xgene-mcb
+          - apm,xgene-rb
+          - apm,xgene-scu
+          - atmel,sama5d2-sfrbu
+          - atmel,sama5d3-nfc-io
+          - atmel,sama5d3-sfrbu
+          - atmel,sama5d4-sfrbu
+          - axis,artpec6-syscon
+          - brcm,cru-clkset
+          - brcm,sr-cdru
+          - brcm,sr-mhb
+          - cirrus,ep7209-syscon1
+          - cirrus,ep7209-syscon2
+          - cirrus,ep7209-syscon3
+          - cnxt,cx92755-uc
+          - freecom,fsg-cs2-system-controller
+          - fsl,imx93-aonmix-ns-syscfg
+          - fsl,imx93-wakeupmix-syscfg
+          - fsl,ls1088a-reset
+          - fsl,vf610-anatop
+          - fsl,vf610-mscm-cpucfg
+          - hisilicon,dsa-subctrl
+          - hisilicon,hi6220-sramctrl
+          - hisilicon,hip04-ppe
+          - hisilicon,pcie-sas-subctrl
+          - hisilicon,peri-subctrl
+          - hpe,gxp-sysreg
+          - loongson,ls1b-syscon
+          - loongson,ls1c-syscon
+          - lsi,axxia-syscon
+          - marvell,armada-3700-cpu-misc
+          - marvell,armada-3700-nb-pm
+          - marvell,armada-3700-avs
+          - marvell,armada-3700-usb2-host-misc
+          - marvell,dove-global-config
+          - mediatek,mt2701-pctl-a-syscfg
+          - mediatek,mt2712-pctl-a-syscfg
+          - mediatek,mt6397-pctl-pmic-syscfg
+          - mediatek,mt8135-pctl-a-syscfg
+          - mediatek,mt8135-pctl-b-syscfg
+          - mediatek,mt8173-pctl-a-syscfg
+          - mediatek,mt8365-syscfg
+          - microchip,lan966x-cpu-syscon
+          - microchip,sam9x60-sfr
+          - microchip,sama7g5-ddr3phy
+          - mscc,ocelot-cpu-syscon
+          - mstar,msc313-pmsleep
+          - nuvoton,ma35d1-sys
+          - nuvoton,wpcm450-shm
+          - rockchip,px30-qos
+          - rockchip,rk3036-qos
+          - rockchip,rk3066-qos
+          - rockchip,rk3128-qos
+          - rockchip,rk3228-qos
+          - rockchip,rk3288-qos
+          - rockchip,rk3368-qos
+          - rockchip,rk3399-qos
+          - rockchip,rk3568-qos
+          - rockchip,rk3588-qos
+          - rockchip,rv1126-qos
+          - st,spear1340-misc
+          - stericsson,nomadik-pmu
+          - starfive,jh7100-sysmain
+          - ti,am62-opp-efuse-table
+          - ti,am62-usb-phy-ctrl
+          - ti,am625-dss-oldi-io-ctrl
+          - ti,am62p-cpsw-mac-efuse
+          - ti,am654-dss-oldi-io-ctrl
+          - ti,j784s4-pcie-ctrl
+          - ti,keystone-pllctrl
   required:
     - compatible
 
 properties:
   compatible:
-    anyOf:
-      - items:
-          - enum:
-              - allwinner,sun8i-a83t-system-controller
-              - allwinner,sun8i-h3-system-controller
-              - allwinner,sun8i-v3s-system-controller
-              - allwinner,sun50i-a64-system-controller
-              - altr,sdr-ctl
-              - amd,pensando-elba-syscon
-              - apm,xgene-csw
-              - apm,xgene-efuse
-              - apm,xgene-mcb
-              - apm,xgene-rb
-              - apm,xgene-scu
-              - brcm,cru-clkset
-              - brcm,sr-cdru
-              - brcm,sr-mhb
-              - freecom,fsg-cs2-system-controller
-              - fsl,imx93-aonmix-ns-syscfg
-              - fsl,imx93-wakeupmix-syscfg
-              - fsl,ls1088a-reset
-              - hisilicon,dsa-subctrl
-              - hisilicon,hi6220-sramctrl
-              - hisilicon,pcie-sas-subctrl
-              - hisilicon,peri-subctrl
-              - hpe,gxp-sysreg
-              - intel,lgm-syscon
-              - loongson,ls1b-syscon
-              - loongson,ls1c-syscon
-              - marvell,armada-3700-cpu-misc
-              - marvell,armada-3700-nb-pm
-              - marvell,armada-3700-avs
-              - marvell,armada-3700-usb2-host-misc
-              - mediatek,mt2712-pctl-a-syscfg
-              - mediatek,mt6397-pctl-pmic-syscfg
-              - mediatek,mt8135-pctl-a-syscfg
-              - mediatek,mt8135-pctl-b-syscfg
-              - mediatek,mt8173-pctl-a-syscfg
-              - mediatek,mt8365-syscfg
-              - microchip,lan966x-cpu-syscon
-              - microchip,sparx5-cpu-syscon
-              - mstar,msc313-pmsleep
-              - nuvoton,ma35d1-sys
-              - nuvoton,wpcm450-shm
-              - rockchip,px30-qos
-              - rockchip,rk3036-qos
-              - rockchip,rk3066-qos
-              - rockchip,rk3128-qos
-              - rockchip,rk3228-qos
-              - rockchip,rk3288-qos
-              - rockchip,rk3368-qos
-              - rockchip,rk3399-qos
-              - rockchip,rk3568-qos
-              - rockchip,rk3588-qos
-              - rockchip,rv1126-qos
-              - starfive,jh7100-sysmain
-              - ti,am62-usb-phy-ctrl
-              - ti,am62p-cpsw-mac-efuse
-              - ti,am654-dss-oldi-io-ctrl
-              - ti,am654-serdes-ctrl
-              - ti,j784s4-pcie-ctrl
-
-          - const: syscon
-
-      - contains:
-          const: syscon
-        minItems: 2
-        maxItems: 5  # Should be enough
+    items:
+      - enum:
+          - al,alpine-sysfabric-service
+          - allwinner,sun8i-a83t-system-controller
+          - allwinner,sun8i-h3-system-controller
+          - allwinner,sun8i-v3s-system-controller
+          - allwinner,sun50i-a64-system-controller
+          - altr,l3regs
+          - altr,sdr-ctl
+          - amd,pensando-elba-syscon
+          - amlogic,meson-mx-assist
+          - amlogic,meson-mx-bootrom
+          - amlogic,meson8-analog-top
+          - amlogic,meson8b-analog-top
+          - amlogic,meson8-pmu
+          - amlogic,meson8b-pmu
+          - apm,merlin-poweroff-mailbox
+          - apm,mustang-poweroff-mailbox
+          - apm,xgene-csw
+          - apm,xgene-efuse
+          - apm,xgene-mcb
+          - apm,xgene-rb
+          - apm,xgene-scu
+          - atmel,sama5d2-sfrbu
+          - atmel,sama5d3-nfc-io
+          - atmel,sama5d3-sfrbu
+          - atmel,sama5d4-sfrbu
+          - axis,artpec6-syscon
+          - brcm,cru-clkset
+          - brcm,sr-cdru
+          - brcm,sr-mhb
+          - cirrus,ep7209-syscon1
+          - cirrus,ep7209-syscon2
+          - cirrus,ep7209-syscon3
+          - cnxt,cx92755-uc
+          - freecom,fsg-cs2-system-controller
+          - fsl,imx93-aonmix-ns-syscfg
+          - fsl,imx93-wakeupmix-syscfg
+          - fsl,ls1088a-reset
+          - fsl,vf610-anatop
+          - fsl,vf610-mscm-cpucfg
+          - hisilicon,dsa-subctrl
+          - hisilicon,hi6220-sramctrl
+          - hisilicon,hip04-ppe
+          - hisilicon,pcie-sas-subctrl
+          - hisilicon,peri-subctrl
+          - hpe,gxp-sysreg
+          - loongson,ls1b-syscon
+          - loongson,ls1c-syscon
+          - lsi,axxia-syscon
+          - marvell,armada-3700-cpu-misc
+          - marvell,armada-3700-nb-pm
+          - marvell,armada-3700-avs
+          - marvell,armada-3700-usb2-host-misc
+          - marvell,dove-global-config
+          - mediatek,mt2701-pctl-a-syscfg
+          - mediatek,mt2712-pctl-a-syscfg
+          - mediatek,mt6397-pctl-pmic-syscfg
+          - mediatek,mt8135-pctl-a-syscfg
+          - mediatek,mt8135-pctl-b-syscfg
+          - mediatek,mt8173-pctl-a-syscfg
+          - mediatek,mt8365-syscfg
+          - microchip,lan966x-cpu-syscon
+          - microchip,sam9x60-sfr
+          - microchip,sama7g5-ddr3phy
+          - mscc,ocelot-cpu-syscon
+          - mstar,msc313-pmsleep
+          - nuvoton,ma35d1-sys
+          - nuvoton,wpcm450-shm
+          - rockchip,px30-qos
+          - rockchip,rk3036-qos
+          - rockchip,rk3066-qos
+          - rockchip,rk3128-qos
+          - rockchip,rk3228-qos
+          - rockchip,rk3288-qos
+          - rockchip,rk3368-qos
+          - rockchip,rk3399-qos
+          - rockchip,rk3568-qos
+          - rockchip,rk3588-qos
+          - rockchip,rv1126-qos
+          - st,spear1340-misc
+          - stericsson,nomadik-pmu
+          - starfive,jh7100-sysmain
+          - ti,am62-opp-efuse-table
+          - ti,am62-usb-phy-ctrl
+          - ti,am625-dss-oldi-io-ctrl
+          - ti,am62p-cpsw-mac-efuse
+          - ti,am654-dss-oldi-io-ctrl
+          - ti,j784s4-pcie-ctrl
+          - ti,keystone-pllctrl
+      - const: syscon
 
   reg:
     maxItems: 1
 
-  reg-io-width:
-    description: |
-      The size (in bytes) of the IO accesses that should be performed
-      on the device.
-    enum: [1, 2, 4, 8]
-
   resets:
     maxItems: 1
 
-  hwlocks:
-    maxItems: 1
-    description:
-      Reference to a phandle of a hardware spinlock provider node.
-
 required:
   - compatible
   - reg
 
 allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: simple-mfd
-    then:
-      properties:
-        compatible:
-          minItems: 3
-          maxItems: 5
+  - $ref: syscon-common.yaml#
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/mfd/ti,twl.yaml b/dts/upstream/Bindings/mfd/ti,twl.yaml
index c2357fecb56..e94b0fd7af0 100644
--- a/dts/upstream/Bindings/mfd/ti,twl.yaml
+++ b/dts/upstream/Bindings/mfd/ti,twl.yaml
@@ -22,6 +22,32 @@ allOf:
           contains:
             const: ti,twl4030
     then:
+      patternProperties:
+        "^regulator-":
+          properties:
+            compatible:
+              enum:
+                - ti,twl4030-vaux1
+                - ti,twl4030-vaux2
+                - ti,twl4030-vaux3
+                - ti,twl4030-vaux4
+                - ti,twl4030-vmmc1
+                - ti,twl4030-vmmc2
+                - ti,twl4030-vpll1
+                - ti,twl4030-vpll2
+                - ti,twl4030-vsim
+                - ti,twl4030-vdac
+                - ti,twl4030-vintana2
+                - ti,twl4030-vio
+                - ti,twl4030-vdd1
+                - ti,twl4030-vdd2
+                - ti,twl4030-vintana1
+                - ti,twl4030-vintdig
+                - ti,twl4030-vusb1v5
+                - ti,twl4030-vusb1v8
+                - ti,twl4030-vusb3v1
+            ti,retain-on-reset: false
+
       properties:
         madc:
           type: object
@@ -50,13 +76,34 @@ allOf:
           properties:
             compatible:
               const: ti,twl4030-wdt
-
   - if:
       properties:
         compatible:
           contains:
             const: ti,twl6030
     then:
+      patternProperties:
+        "^regulator-":
+          properties:
+            compatible:
+              enum:
+                - ti,twl6030-vaux1
+                - ti,twl6030-vaux2
+                - ti,twl6030-vaux3
+                - ti,twl6030-vmmc
+                - ti,twl6030-vpp
+                - ti,twl6030-vusim
+                - ti,twl6030-vana
+                - ti,twl6030-vcxio
+                - ti,twl6030-vdac
+                - ti,twl6030-vusb
+                - ti,twl6030-v1v8
+                - ti,twl6030-v2v1
+                - ti,twl6030-vdd1
+                - ti,twl6030-vdd2
+                - ti,twl6030-vdd3
+            regulator-initial-mode: false
+
       properties:
         gpadc:
           type: object
@@ -69,6 +116,25 @@ allOf:
           contains:
             const: ti,twl6032
     then:
+      patternProperties:
+        "^regulator-":
+          properties:
+            compatible:
+              enum:
+                - ti,twl6032-ldo1
+                - ti,twl6032-ldo2
+                - ti,twl6032-ldo3
+                - ti,twl6032-ldo4
+                - ti,twl6032-ldo5
+                - ti,twl6032-ldo6
+                - ti,twl6032-ldo7
+                - ti,twl6032-ldoln
+                - ti,twl6032-ldousb
+                - ti,twl6032-smps3
+                - ti,twl6032-smps4
+                - ti,twl6032-vio
+            regulator-initial-mode: false
+
       properties:
         gpadc:
           type: object
@@ -112,6 +178,27 @@ properties:
       interrupts:
         maxItems: 1
 
+patternProperties:
+  "^regulator-":
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/regulator.yaml
+    properties:
+      compatible: true
+      regulator-initial-mode:
+        enum:
+          - 0x08 # Sleep mode, the nominal output voltage is maintained
+                 # with low power consumption with low load current capability
+          - 0x0e # Active mode, the regulator can deliver its nominal output
+                 # voltage with full-load current capability
+      ti,retain-on-reset:
+        description:
+          Does not turn off the supplies during warm
+          reset. Could be needed for VMMC, as TWL6030
+          reset sequence for this signal does not comply
+          with the SD specification.
+        type: boolean
+
 unevaluatedProperties: false
 
 required:
@@ -131,9 +218,85 @@ examples:
         compatible = "ti,twl6030";
         reg = <0x48>;
         interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+        interrupt-parent = <&gic>;
         interrupt-controller;
         #interrupt-cells = <1>;
-        interrupt-parent = <&gic>;
+
+        gpadc {
+          compatible = "ti,twl6030-gpadc";
+          interrupts = <6>;
+          #io-channel-cells = <1>;
+        };
+
+        rtc {
+          compatible = "ti,twl4030-rtc";
+          interrupts = <8>;
+        };
+
+        regulator-vaux1 {
+          compatible = "ti,twl6030-vaux1";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <3000000>;
+        };
+
+        regulator-vmmc1 {
+          compatible = "ti,twl6030-vmmc";
+          ti,retain-on-reset;
+        };
       };
     };
 
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@48 {
+        compatible = "ti,twl4030";
+        reg = <0x48>;
+        interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+        interrupt-parent = <&intc>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        bci {
+          compatible = "ti,twl4030-bci";
+          interrupts = <9>, <2>;
+          bci3v1-supply = <&vusb3v1>;
+          io-channels = <&twl_madc 11>;
+          io-channel-names = "vac";
+        };
+
+        twl_madc: madc {
+          compatible = "ti,twl4030-madc";
+          interrupts = <3>;
+          #io-channel-cells = <1>;
+        };
+
+        pwrbutton {
+          compatible = "ti,twl4030-pwrbutton";
+          interrupts = <8>;
+        };
+
+        rtc {
+          compatible = "ti,twl4030-rtc";
+          interrupts = <11>;
+        };
+
+        regulator-vaux1 {
+          compatible = "ti,twl4030-vaux1";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-initial-mode = <0xe>;
+        };
+
+        vusb3v1: regulator-vusb3v1 {
+          compatible = "ti,twl4030-vusb3v1";
+        };
+
+        watchdog {
+          compatible = "ti,twl4030-wdt";
+        };
+      };
+    };
+...
diff --git a/dts/upstream/Bindings/mips/brcm/soc.yaml b/dts/upstream/Bindings/mips/brcm/soc.yaml
index 975945ca288..0cc634482a6 100644
--- a/dts/upstream/Bindings/mips/brcm/soc.yaml
+++ b/dts/upstream/Bindings/mips/brcm/soc.yaml
@@ -55,6 +55,16 @@ properties:
          under the "cpus" node.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+      brcm,bmips-cbr-reg:
+        description: Reference address of the CBR.
+          Some SoC suffer from a BUG where CBR(Core Base Register)
+          address might be badly or never initialized by the Bootloader
+          or reading it from co-processor registers, if the system boots
+          from secondary CPU, results in invalid address.
+          The CBR address is always the same on the SoC hence it
+          can be provided in DT to handle these broken case.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
     patternProperties:
       "^cpu@[0-9]$":
         type: object
@@ -64,6 +74,20 @@ properties:
     required:
       - mips-hpt-frequency
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm6358
+          - brcm,bcm6368
+
+then:
+  properties:
+    cpus:
+      required:
+        - brcm,bmips-cbr-reg
+
 additionalProperties: true
 
 examples:
diff --git a/dts/upstream/Bindings/mips/mobileye.yaml b/dts/upstream/Bindings/mips/mobileye.yaml
index 831975f6b47..d60744550e4 100644
--- a/dts/upstream/Bindings/mips/mobileye.yaml
+++ b/dts/upstream/Bindings/mips/mobileye.yaml
@@ -26,6 +26,11 @@ properties:
           - enum:
               - mobileye,eyeq5-epm5
           - const: mobileye,eyeq5
+      - description: Boards with Mobileye EyeQ6H SoC
+        items:
+          - enum:
+              - mobileye,eyeq6h-epm6
+          - const: mobileye,eyeq6h
 
 additionalProperties: true
 
diff --git a/dts/upstream/Bindings/mips/mscc.txt b/dts/upstream/Bindings/mips/mscc.txt
index cc916eaeed0..e74165696b7 100644
--- a/dts/upstream/Bindings/mips/mscc.txt
+++ b/dts/upstream/Bindings/mips/mscc.txt
@@ -25,23 +25,6 @@ Example:
 		reg = <0x71070000 0x1c>;
 	};
 
-
-o CPU system control:
-
-The SoC has a few registers (ICPU_CFG:CPU_SYSTEM_CTRL) handling configuration of
-the CPU: 8 general purpose registers, reset control, CPU en/disabling, CPU
-endianness, CPU bus control, CPU status.
-
-Required properties:
-- compatible: Should be "mscc,ocelot-cpu-syscon", "syscon"
-- reg : Should contain registers location and length
-
-Example:
-	syscon@70000000 {
-		compatible = "mscc,ocelot-cpu-syscon", "syscon";
-		reg = <0x70000000 0x2c>;
-	};
-
 o HSIO regs:
 
 The SoC has a few registers (HSIO) handling miscellaneous functionalities:
diff --git a/dts/upstream/Bindings/mips/realtek-rtl.yaml b/dts/upstream/Bindings/mips/realtek-rtl.yaml
index f8ac309d299..d337655bfbf 100644
--- a/dts/upstream/Bindings/mips/realtek-rtl.yaml
+++ b/dts/upstream/Bindings/mips/realtek-rtl.yaml
@@ -20,5 +20,9 @@ properties:
           - enum:
               - cisco,sg220-26
           - const: realtek,rtl8382-soc
+      - items:
+          - enum:
+              - cameo,rtl9302c-2x-rtl8224-2xge
+          - const: realtek,rtl9302-soc
 
 additionalProperties: true
diff --git a/dts/upstream/Bindings/misc/fsl,qoriq-mc.txt b/dts/upstream/Bindings/misc/fsl,qoriq-mc.txt
deleted file mode 100644
index 7b486d4985d..00000000000
--- a/dts/upstream/Bindings/misc/fsl,qoriq-mc.txt
+++ /dev/null
@@ -1,196 +0,0 @@
-* Freescale Management Complex
-
-The Freescale Management Complex (fsl-mc) is a hardware resource
-manager that manages specialized hardware objects used in
-network-oriented packet processing applications. After the fsl-mc
-block is enabled, pools of hardware resources are available, such as
-queues, buffer pools, I/O interfaces. These resources are building
-blocks that can be used to create functional hardware objects/devices
-such as network interfaces, crypto accelerator instances, L2 switches,
-etc.
-
-For an overview of the DPAA2 architecture and fsl-mc bus see:
-Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
-
-As described in the above overview, all DPAA2 objects in a DPRC share the
-same hardware "isolation context" and a 10-bit value called an ICID
-(isolation context id) is expressed by the hardware to identify
-the requester.
-
-The generic 'iommus' property is insufficient to describe the relationship
-between ICIDs and IOMMUs, so an iommu-map property is used to define
-the set of possible ICIDs under a root DPRC and how they map to
-an IOMMU.
-
-For generic IOMMU bindings, see
-Documentation/devicetree/bindings/iommu/iommu.txt.
-
-For arm-smmu binding, see:
-Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
-
-The MSI writes are accompanied by sideband data which is derived from the ICID.
-The msi-map property is used to associate the devices with both the ITS
-controller and the sideband data which accompanies the writes.
-
-For generic MSI bindings, see
-Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-For GICv3 and GIC ITS bindings, see:
-Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml.
-
-Required properties:
-
-    - compatible
-        Value type: <string>
-        Definition: Must be "fsl,qoriq-mc".  A Freescale Management Complex
-                    compatible with this binding must have Block Revision
-                    Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
-                    the MC control register region.
-
-    - reg
-        Value type: <prop-encoded-array>
-        Definition: A standard property.  Specifies one or two regions
-                    defining the MC's registers:
-
-                       -the first region is the command portal for the
-                        this machine and must always be present
-
-                       -the second region is the MC control registers. This
-                        region may not be present in some scenarios, such
-                        as in the device tree presented to a virtual machine.
-
-    - ranges
-        Value type: <prop-encoded-array>
-        Definition: A standard property.  Defines the mapping between the child
-                    MC address space and the parent system address space.
-
-                    The MC address space is defined by 3 components:
-                       <region type> <offset hi> <offset lo>
-
-                    Valid values for region type are
-                       0x0 - MC portals
-                       0x1 - QBMAN portals
-
-    - #address-cells
-        Value type: <u32>
-        Definition: Must be 3.  (see definition in 'ranges' property)
-
-    - #size-cells
-        Value type: <u32>
-        Definition: Must be 1.
-
-Sub-nodes:
-
-        The fsl-mc node may optionally have dpmac sub-nodes that describe
-        the relationship between the Ethernet MACs which belong to the MC
-        and the Ethernet PHYs on the system board.
-
-        The dpmac nodes must be under a node named "dpmacs" which contains
-        the following properties:
-
-            - #address-cells
-              Value type: <u32>
-              Definition: Must be present if dpmac sub-nodes are defined and must
-                          have a value of 1.
-
-            - #size-cells
-              Value type: <u32>
-              Definition: Must be present if dpmac sub-nodes are defined and must
-                          have a value of 0.
-
-        These nodes must have the following properties:
-
-            - compatible
-              Value type: <string>
-              Definition: Must be "fsl,qoriq-mc-dpmac".
-
-            - reg
-              Value type: <prop-encoded-array>
-              Definition: Specifies the id of the dpmac.
-
-            - phy-handle
-              Value type: <phandle>
-              Definition: Specifies the phandle to the PHY device node associated
-                          with the this dpmac.
-Optional properties:
-
-- iommu-map: Maps an ICID to an IOMMU and associated iommu-specifier
-  data.
-
-  The property is an arbitrary number of tuples of
-  (icid-base,iommu,iommu-base,length).
-
-  Any ICID i in the interval [icid-base, icid-base + length) is
-  associated with the listed IOMMU, with the iommu-specifier
-  (i - icid-base + iommu-base).
-
-- msi-map: Maps an ICID to a GIC ITS and associated msi-specifier
-  data.
-
-  The property is an arbitrary number of tuples of
-  (icid-base,gic-its,msi-base,length).
-
-  Any ICID in the interval [icid-base, icid-base + length) is
-  associated with the listed GIC ITS, with the msi-specifier
-  (i - icid-base + msi-base).
-
-Deprecated properties:
-
-    - msi-parent
-        Value type: <phandle>
-        Definition: Describes the MSI controller node handling message
-                    interrupts for the MC. When there is no translation
-                    between the ICID and deviceID this property can be used
-                    to describe the MSI controller used by the devices on the
-                    mc-bus.
-                    The use of this property for mc-bus is deprecated. Please
-                    use msi-map.
-
-Example:
-
-        smmu: iommu@5000000 {
-               compatible = "arm,mmu-500";
-               #iommu-cells = <1>;
-               stream-match-mask = <0x7C00>;
-               ...
-        };
-
-        gic: interrupt-controller@6000000 {
-               compatible = "arm,gic-v3";
-               ...
-        }
-        its: gic-its@6020000 {
-               compatible = "arm,gic-v3-its";
-               msi-controller;
-               ...
-        };
-
-        fsl_mc: fsl-mc@80c000000 {
-                compatible = "fsl,qoriq-mc";
-                reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
-                      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-                /* define map for ICIDs 23-64 */
-                iommu-map = <23 &smmu 23 41>;
-                /* define msi map for ICIDs 23-64 */
-                msi-map = <23 &its 23 41>;
-                #address-cells = <3>;
-                #size-cells = <1>;
-
-                /*
-                 * Region type 0x0 - MC portals
-                 * Region type 0x1 - QBMAN portals
-                 */
-                ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
-                          0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
-
-                dpmacs {
-                    #address-cells = <1>;
-                    #size-cells = <0>;
-
-                    dpmac@1 {
-                        compatible = "fsl,qoriq-mc-dpmac";
-                        reg = <1>;
-                        phy-handle = <&mdio0_phy0>;
-                    }
-                }
-        };
diff --git a/dts/upstream/Bindings/misc/fsl,qoriq-mc.yaml b/dts/upstream/Bindings/misc/fsl,qoriq-mc.yaml
new file mode 100644
index 00000000000..01b00d89a99
--- /dev/null
+++ b/dts/upstream/Bindings/misc/fsl,qoriq-mc.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Management Complex
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Freescale Management Complex (fsl-mc) is a hardware resource
+  manager that manages specialized hardware objects used in
+  network-oriented packet processing applications. After the fsl-mc
+  block is enabled, pools of hardware resources are available, such as
+  queues, buffer pools, I/O interfaces. These resources are building
+  blocks that can be used to create functional hardware objects/devices
+  such as network interfaces, crypto accelerator instances, L2 switches,
+  etc.
+
+  For an overview of the DPAA2 architecture and fsl-mc bus see:
+  Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
+
+  As described in the above overview, all DPAA2 objects in a DPRC share the
+  same hardware "isolation context" and a 10-bit value called an ICID
+  (isolation context id) is expressed by the hardware to identify
+  the requester.
+
+  The generic 'iommus' property is insufficient to describe the relationship
+  between ICIDs and IOMMUs, so an iommu-map property is used to define
+  the set of possible ICIDs under a root DPRC and how they map to
+  an IOMMU.
+
+  For generic IOMMU bindings, see
+  Documentation/devicetree/bindings/iommu/iommu.txt.
+
+  For arm-smmu binding, see:
+  Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
+
+  The MSI writes are accompanied by sideband data which is derived from the ICID.
+  The msi-map property is used to associate the devices with both the ITS
+  controller and the sideband data which accompanies the writes.
+
+  For generic MSI bindings, see
+  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+  For GICv3 and GIC ITS bindings, see:
+  Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml.
+
+properties:
+  compatible:
+    enum:
+      - fsl,qoriq-mc
+    description:
+      Must be "fsl,qoriq-mc".  A Freescale Management Complex
+      compatible with this binding must have Block Revision
+      Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
+      the MC control register region.
+
+  reg:
+    items:
+      - description:
+          the first region is the command portal for the
+          this machine and must always be present
+
+      - description:
+          the second region is the MC control registers. This
+          region may not be present in some scenarios, such
+          as in the device tree presented to a virtual machine.
+
+  ranges:
+    description: |
+      A standard property.  Defines the mapping between the child
+      MC address space and the parent system address space.
+
+      The MC address space is defined by 3 components:
+        <region type> <offset hi> <offset lo>
+
+      Valid values for region type are
+        0x0 - MC portals
+        0x1 - QBMAN portals
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 1
+
+  iommu-map:
+    description: |
+      Maps an ICID to an IOMMU and associated iommu-specifier
+      data.
+
+      The property is an arbitrary number of tuples of
+      (icid-base,iommu,iommu-base,length).
+
+      Any ICID i in the interval [icid-base, icid-base + length) is
+      associated with the listed IOMMU, with the iommu-specifier
+      (i - icid-base + iommu-base).
+
+  msi-map:
+    description: |
+      Maps an ICID to a GIC ITS and associated msi-specifier
+      data.
+
+      The property is an arbitrary number of tuples of
+      (icid-base,gic-its,msi-base,length).
+
+      Any ICID in the interval [icid-base, icid-base + length) is
+      associated with the listed GIC ITS, with the msi-specifier
+      (i - icid-base + msi-base).
+
+  msi-parent:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes the MSI controller node handling message
+      interrupts for the MC. When there is no translation
+      between the ICID and deviceID this property can be used
+      to describe the MSI controller used by the devices on the
+      mc-bus.
+      The use of this property for mc-bus is deprecated. Please
+      use msi-map.
+
+  dma-coherent: true
+
+  dpmacs:
+    type: object
+    description:
+      The fsl-mc node may optionally have dpmac sub-nodes that describe
+      the relationship between the Ethernet MACs which belong to the MC
+      and the Ethernet PHYs on the system board.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      '^ethernet@[a-f0-9]+$':
+        $ref: /schemas/net/fsl,qoriq-mc-dpmac.yaml
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    fsl-mc@80c000000 {
+        compatible = "fsl,qoriq-mc";
+        reg = <0x0c000000 0x40>,    /* MC portal base */
+              <0x08340000 0x40000>; /* MC control reg */
+        /*
+         * Region type 0x0 - MC portals
+         * Region type 0x1 - QBMAN portals
+         */
+        ranges = <0x0 0x0 0x8 0x0c000000 0x4000000
+                 0x1 0x0 0x8 0x18000000 0x8000000>;
+        
+        /* define map for ICIDs 23-64 */
+        iommu-map = <23 &smmu 23 41>;
+        /* define msi map for ICIDs 23-64 */
+        msi-map = <23 &its 23 41>;
+        #address-cells = <3>;
+        #size-cells = <1>;
+
+        dpmacs {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet@1 {
+                compatible = "fsl,qoriq-mc-dpmac";
+                reg = <1>;
+                phy-handle = <&mdio0_phy0>;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/misc/qemu,vcpu-stall-detector.yaml b/dts/upstream/Bindings/misc/qemu,vcpu-stall-detector.yaml
index 1aebeb696ee..e12d80be00c 100644
--- a/dts/upstream/Bindings/misc/qemu,vcpu-stall-detector.yaml
+++ b/dts/upstream/Bindings/misc/qemu,vcpu-stall-detector.yaml
@@ -29,6 +29,9 @@ properties:
       Defaults to 10 if unset.
     default: 10
 
+  interrupts:
+    maxItems: 1
+
   timeout-sec:
     description: |
       The stall detector expiration timeout measured in seconds.
@@ -43,9 +46,12 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     vmwdt@9030000 {
       compatible = "qemu,vcpu-stall-detector";
       reg = <0x9030000 0x10000>;
       clock-frequency = <10>;
       timeout-sec = <8>;
+      interrupts = <GIC_PPI 15 IRQ_TYPE_EDGE_RISING>;
     };
diff --git a/dts/upstream/Bindings/mmc/amlogic,meson-gx-mmc.yaml b/dts/upstream/Bindings/mmc/amlogic,meson-gx-mmc.yaml
index bc403ae9e5d..57646575a13 100644
--- a/dts/upstream/Bindings/mmc/amlogic,meson-gx-mmc.yaml
+++ b/dts/upstream/Bindings/mmc/amlogic,meson-gx-mmc.yaml
@@ -51,6 +51,9 @@ properties:
       set when controller's internal DMA engine cannot access the DRAM memory,
       like on the G12A dedicated SDIO controller.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/mmc/brcm,sdhci-brcmstb.yaml b/dts/upstream/Bindings/mmc/brcm,sdhci-brcmstb.yaml
index cbd3d6c6c77..eee6be7a786 100644
--- a/dts/upstream/Bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ b/dts/upstream/Bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -20,6 +20,7 @@ properties:
           - const: brcm,sdhci-brcmstb
       - items:
           - enum:
+              - brcm,bcm2712-sdhci
               - brcm,bcm74165b0-sdhci
               - brcm,bcm7445-sdhci
               - brcm,bcm7425-sdhci
diff --git a/dts/upstream/Bindings/mmc/fsl,esdhc.yaml b/dts/upstream/Bindings/mmc/fsl,esdhc.yaml
new file mode 100644
index 00000000000..b86ffb53b18
--- /dev/null
+++ b/dts/upstream/Bindings/mmc/fsl,esdhc.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fsl,esdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Enhanced Secure Digital Host Controller (eSDHC)
+
+description:
+  The Enhanced Secure Digital Host Controller provides an interface
+  for MMC, SD, and SDIO types of memory cards.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc8536-esdhc
+          - fsl,mpc8378-esdhc
+          - fsl,p2020-esdhc
+          - fsl,p4080-esdhc
+          - fsl,t1040-esdhc
+          - fsl,t4240-esdhc
+          - fsl,ls1012a-esdhc
+          - fsl,ls1028a-esdhc
+          - fsl,ls1088a-esdhc
+          - fsl,ls1043a-esdhc
+          - fsl,ls1046a-esdhc
+          - fsl,ls2080a-esdhc
+      - const: fsl,esdhc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: specifies eSDHC base clock frequency.
+
+  sdhci,wp-inverted:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+    description:
+      specifies that eSDHC controller reports
+      inverted write-protect state; New devices should use the generic
+      "wp-inverted" property.
+
+  sdhci,1-bit-only:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+    description:
+      specifies that a controller can only handle
+      1-bit data transfers. New devices should use the generic
+      "bus-width = <1>" property.
+
+  sdhci,auto-cmd12:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      specifies that a controller can only handle auto CMD12.
+
+  voltage-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: specifies minimum slot voltage (mV).
+        - description: specifies maximum slot voltage (mV).
+    minItems: 1
+    maxItems: 8
+
+  dma-coherent: true
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If the host controller is little-endian mode, specify
+      this property. The default endian mode is big-endian.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@2e000 {
+        compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
+        reg = <0x2e000 0x1000>;
+        interrupts = <42 0x8>;
+        interrupt-parent = <&ipic>;
+        /* Filled in by U-Boot */
+        clock-frequency = <100000000>;
+        voltage-ranges = <3300 3300>;
+    };
diff --git a/dts/upstream/Bindings/mmc/fsl-esdhc.txt b/dts/upstream/Bindings/mmc/fsl-esdhc.txt
deleted file mode 100644
index edb8cadb954..00000000000
--- a/dts/upstream/Bindings/mmc/fsl-esdhc.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Freescale Enhanced Secure Digital Host Controller (eSDHC)
-
-The Enhanced Secure Digital Host Controller provides an interface
-for MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the sdhci-esdhc driver.
-
-Required properties:
-  - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc".
-    Possible compatibles for PowerPC:
-	"fsl,mpc8536-esdhc"
-	"fsl,mpc8378-esdhc"
-	"fsl,p2020-esdhc"
-	"fsl,p4080-esdhc"
-	"fsl,t1040-esdhc"
-	"fsl,t4240-esdhc"
-    Possible compatibles for ARM:
-	"fsl,ls1012a-esdhc"
-	"fsl,ls1028a-esdhc"
-	"fsl,ls1088a-esdhc"
-	"fsl,ls1043a-esdhc"
-	"fsl,ls1046a-esdhc"
-	"fsl,ls2080a-esdhc"
-  - clock-frequency : specifies eSDHC base clock frequency.
-
-Optional properties:
-  - sdhci,wp-inverted : specifies that eSDHC controller reports
-    inverted write-protect state; New devices should use the generic
-    "wp-inverted" property.
-  - sdhci,1-bit-only : specifies that a controller can only handle
-    1-bit data transfers. New devices should use the generic
-    "bus-width = <1>" property.
-  - sdhci,auto-cmd12: specifies that a controller can only handle auto
-    CMD12.
-  - voltage-ranges : two cells are required, first cell specifies minimum
-    slot voltage (mV), second cell specifies maximum slot voltage (mV).
-    Several ranges could be specified.
-  - little-endian : If the host controller is little-endian mode, specify
-    this property. The default endian mode is big-endian.
-
-Example:
-
-sdhci@2e000 {
-	compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
-	reg = <0x2e000 0x1000>;
-	interrupts = <42 0x8>;
-	interrupt-parent = <&ipic>;
-	/* Filled in by U-Boot */
-	clock-frequency = <0>;
-	voltage-ranges = <3300 3300>;
-};
diff --git a/dts/upstream/Bindings/mmc/mmc-spi-slot.yaml b/dts/upstream/Bindings/mmc/mmc-spi-slot.yaml
index 36acc40c7d1..6e2cdac6a85 100644
--- a/dts/upstream/Bindings/mmc/mmc-spi-slot.yaml
+++ b/dts/upstream/Bindings/mmc/mmc-spi-slot.yaml
@@ -27,17 +27,19 @@ properties:
     maxItems: 1
 
   voltage-ranges:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     description: |
       Two cells are required, first cell specifies minimum slot voltage (mV),
       second cell specifies maximum slot voltage (mV).
     items:
-      - description: |
-          value for minimum slot voltage in mV
-        default: 3200
-      - description: |
-          value for maximum slot voltage in mV
-        default: 3400
+      items:
+        - description: |
+            value for minimum slot voltage in mV
+          default: 3200
+        - description: |
+            value for maximum slot voltage in mV
+          default: 3400
+    maxItems: 1
 
   gpios:
     description: |
diff --git a/dts/upstream/Bindings/mmc/sdhci-msm.yaml b/dts/upstream/Bindings/mmc/sdhci-msm.yaml
index c24c537f62b..11979b026d2 100644
--- a/dts/upstream/Bindings/mmc/sdhci-msm.yaml
+++ b/dts/upstream/Bindings/mmc/sdhci-msm.yaml
@@ -51,6 +51,7 @@ properties:
               - qcom,sdm845-sdhci
               - qcom,sdx55-sdhci
               - qcom,sdx65-sdhci
+              - qcom,sdx75-sdhci
               - qcom,sm6115-sdhci
               - qcom,sm6125-sdhci
               - qcom,sm6350-sdhci
diff --git a/dts/upstream/Bindings/mmc/sdhci-sprd.txt b/dts/upstream/Bindings/mmc/sdhci-sprd.txt
deleted file mode 100644
index eb7eb1b529f..00000000000
--- a/dts/upstream/Bindings/mmc/sdhci-sprd.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Spreadtrum SDHCI controller (sdhci-sprd)
-
-The Secure Digital (SD) Host controller on Spreadtrum SoCs provides an interface
-for MMC, SD and SDIO types of cards.
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-sprd driver.
-
-Required properties:
-- compatible: Should contain "sprd,sdhci-r11".
-- reg: physical base address of the controller and length.
-- interrupts: Interrupts used by the SDHCI controller.
-- clocks: Should contain phandle for the clock feeding the SDHCI controller
-- clock-names: Should contain the following:
-	"sdio" - SDIO source clock (required)
-	"enable" - gate clock which used for enabling/disabling the device (required)
-	"2x_enable" - gate clock controlling the device for some special platforms (optional)
-
-Optional properties:
-- assigned-clocks: the same with "sdio" clock
-- assigned-clock-parents: the default parent of "sdio" clock
-- pinctrl-names: should be "default", "state_uhs"
-- pinctrl-0: should contain default/high speed pin control
-- pinctrl-1: should contain uhs mode pin control
-
-PHY DLL delays are used to delay the data valid window, and align the window
-to sampling clock. PHY DLL delays can be configured by following properties,
-and each property contains 4 cells which are used to configure the clock data
-write line delay value, clock read command line delay value, clock read data
-positive edge delay value and clock read data negative edge delay value.
-Each cell's delay value unit is cycle of the PHY clock.
-
-- sprd,phy-delay-legacy: Delay value for legacy timing.
-- sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing.
-- sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing.
-- sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing.
-- sprd,phy-delay-mmc-highspeed: Delay value for MMC high-speed timing.
-- sprd,phy-delay-mmc-ddr52: Delay value for MMC DDR52 timing.
-- sprd,phy-delay-mmc-hs200: Delay value for MMC HS200 timing.
-- sprd,phy-delay-mmc-hs400: Delay value for MMC HS400 timing.
-- sprd,phy-delay-mmc-hs400es: Delay value for MMC HS400 enhanced strobe timing.
-
-Examples:
-
-sdio0: sdio@20600000 {
-	compatible  = "sprd,sdhci-r11";
-	reg = <0 0x20600000 0 0x1000>;
-	interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-
-	clock-names = "sdio", "enable";
-	clocks = <&ap_clk CLK_EMMC_2X>,
-		 <&apahb_gate CLK_EMMC_EB>;
-	assigned-clocks = <&ap_clk CLK_EMMC_2X>;
-	assigned-clock-parents = <&rpll CLK_RPLL_390M>;
-
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&sd0_pins_default>;
-	pinctrl-1 = <&sd0_pins_uhs>;
-
-	sprd,phy-delay-sd-uhs-sdr104 = <0x3f 0x7f 0x2e 0x2e>;
-	bus-width = <8>;
-	non-removable;
-	no-sdio;
-	no-sd;
-	cap-mmc-hw-reset;
-	status = "okay";
-};
diff --git a/dts/upstream/Bindings/mmc/sprd,sdhci-r11.yaml b/dts/upstream/Bindings/mmc/sprd,sdhci-r11.yaml
new file mode 100644
index 00000000000..b08081bc018
--- /dev/null
+++ b/dts/upstream/Bindings/mmc/sprd,sdhci-r11.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sprd,sdhci-r11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SDHCI controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    const: sprd,sdhci-r11
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: SDIO source clock
+      - description: gate clock for enabling/disabling the device
+      - description: gate clock controlling the device for some special platforms (optional)
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: sdio
+      - const: enable
+      - const: 2x_enable
+
+  pinctrl-0:
+    description: default/high speed pin control
+    maxItems: 1
+
+  pinctrl-1:
+    description: UHS mode pin control
+    maxItems: 1
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: state_uhs
+
+patternProperties:
+  "^sprd,phy-delay-(legacy|mmc-(ddr52|highspeed|hs[24]00|hs400es)|sd-(highspeed|uhs-sdr(50|104)))$":
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: clock data write line delay value
+      - description: clock read command line delay value
+      - description: clock read data positive edge delay value
+      - description: clock read data negative edge delay value
+    description:
+      PHY DLL delays are used to delay the data valid window, and align
+      the window to the sampling clock. Each cell's delay value unit is
+      cycle of the PHY clock.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@50430000 {
+      compatible = "sprd,sdhci-r11";
+      reg = <0x50430000 0x1000>;
+      interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&aon_prediv CLK_EMMC_2X>,
+               <&apahb_gate CLK_EMMC_EB>,
+               <&aon_gate CLK_EMMC_2X_EN>;
+      clock-names = "sdio", "enable", "2x_enable";
+
+      pinctrl-0 = <&sd0_pins_default>;
+      pinctrl-1 = <&sd0_pins_uhs>;
+      pinctrl-names = "default", "state_uhs";
+
+      bus-width = <8>;
+      cap-mmc-hw-reset;
+      mmc-hs400-enhanced-strobe;
+      mmc-hs400-1_8v;
+      mmc-hs200-1_8v;
+      mmc-ddr-1_8v;
+      non-removable;
+      no-sdio;
+      no-sd;
+
+      sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
+      sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
+      sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
+      sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
+    };
+...
diff --git a/dts/upstream/Bindings/mtd/amlogic,meson-nand.yaml b/dts/upstream/Bindings/mtd/amlogic,meson-nand.yaml
index 57b6957c841..284f0f882c3 100644
--- a/dts/upstream/Bindings/mtd/amlogic,meson-nand.yaml
+++ b/dts/upstream/Bindings/mtd/amlogic,meson-nand.yaml
@@ -64,11 +64,29 @@ patternProperties:
         items:
           maximum: 0
 
+      amlogic,boot-pages:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Number of pages starting from offset 0, where a special ECC
+          configuration must be used because it is accessed by the ROM
+          code. This ECC configuration uses 384 bytes data blocks.
+          Also scrambling mode is enabled for such pages.
+
+      amlogic,boot-page-step:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Interval between pages, accessed by the ROM code. For example
+          we have 8 pages [0, 7]. Pages 0,2,4,6 are accessed by the
+          ROM code, so this field will be 2 (e.g. every 2nd page). Rest
+          of pages - 1,3,5,7 are read/written without this mode.
+
     unevaluatedProperties: false
 
     dependencies:
       nand-ecc-strength: [nand-ecc-step-size]
       nand-ecc-step-size: [nand-ecc-strength]
+      amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"]
+      amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"]
 
 
 required:
diff --git a/dts/upstream/Bindings/mtd/atmel-nand.txt b/dts/upstream/Bindings/mtd/atmel-nand.txt
index 4598930851d..e36c35b1787 100644
--- a/dts/upstream/Bindings/mtd/atmel-nand.txt
+++ b/dts/upstream/Bindings/mtd/atmel-nand.txt
@@ -60,15 +60,6 @@ Required properties:
 - reg: should contain 2 register ranges. The first one is pointing to the PMECC
        block, and the second one to the PMECC_ERRLOC block.
 
-* SAMA5 NFC I/O bindings:
-
-SAMA5 SoCs embed an advanced NAND controller logic to automate READ/WRITE page
-operations. This interface to this logic is placed in a separate I/O range and
-should thus have its own DT node.
-
-- compatible: should be "atmel,sama5d3-nfc-io", "syscon".
-- reg: should contain the I/O range used to interact with the NFC logic.
-
 Example:
 
 	nfc_io: nfc-io@70000000 {
diff --git a/dts/upstream/Bindings/mtd/gpmi-nand.yaml b/dts/upstream/Bindings/mtd/gpmi-nand.yaml
index 021c0da0b07..f9eb1868ca1 100644
--- a/dts/upstream/Bindings/mtd/gpmi-nand.yaml
+++ b/dts/upstream/Bindings/mtd/gpmi-nand.yaml
@@ -24,6 +24,7 @@ properties:
           - fsl,imx6q-gpmi-nand
           - fsl,imx6sx-gpmi-nand
           - fsl,imx7d-gpmi-nand
+          - fsl,imx8qxp-gpmi-nand
       - items:
           - enum:
               - fsl,imx8mm-gpmi-nand
@@ -151,6 +152,27 @@ allOf:
             - const: gpmi_io
             - const: gpmi_bch_apb
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+            - description: SoC gpmi apb clock
+            - description: SoC gpmi bch clock
+            - description: SoC gpmi bch apb clock
+        clock-names:
+          items:
+            - const: gpmi_io
+            - const: gpmi_apb
+            - const: gpmi_bch
+            - const: gpmi_bch_apb
+
 examples:
   - |
     nand-controller@8000c000 {
diff --git a/dts/upstream/Bindings/mtd/qcom,nandc.yaml b/dts/upstream/Bindings/mtd/qcom,nandc.yaml
index 4ada60fbf81..35b4206ea91 100644
--- a/dts/upstream/Bindings/mtd/qcom,nandc.yaml
+++ b/dts/upstream/Bindings/mtd/qcom,nandc.yaml
@@ -31,6 +31,18 @@ properties:
       - const: core
       - const: aon
 
+  qcom,cmd-crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Must contain the ADM command type CRCI block instance number specified for
+      the NAND controller on the given platform
+
+  qcom,data-crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Must contain the ADM data type CRCI block instance number specified for
+      the NAND controller on the given platform
+
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
@@ -83,18 +95,6 @@ allOf:
           items:
             - const: rxtx
 
-        qcom,cmd-crci:
-          $ref: /schemas/types.yaml#/definitions/uint32
-          description:
-            Must contain the ADM command type CRCI block instance number
-            specified for the NAND controller on the given platform
-
-        qcom,data-crci:
-          $ref: /schemas/types.yaml#/definitions/uint32
-          description:
-            Must contain the ADM data type CRCI block instance number
-            specified for the NAND controller on the given platform
-
   - if:
       properties:
         compatible:
@@ -119,19 +119,9 @@ allOf:
             - const: rx
             - const: cmd
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,ipq806x-nand
+        qcom,cmd-crci: false
+        qcom,data-crci: false
 
-    then:
-      patternProperties:
-        "^nand@[a-f0-9]$":
-          properties:
-            qcom,boot-partitions: true
-    else:
       patternProperties:
         "^nand@[a-f0-9]$":
           properties:
diff --git a/dts/upstream/Bindings/net/airoha,en7581-eth.yaml b/dts/upstream/Bindings/net/airoha,en7581-eth.yaml
new file mode 100644
index 00000000000..c578637c582
--- /dev/null
+++ b/dts/upstream/Bindings/net/airoha,en7581-eth.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/airoha,en7581-eth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 Frame Engine Ethernet controller
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  The frame engine ethernet controller can be found on Airoha SoCs.
+  These SoCs have multi-GMAC ports.
+
+properties:
+  compatible:
+    enum:
+      - airoha,en7581-eth
+
+  reg:
+    items:
+      - description: Frame engine base address
+      - description: QDMA0 base address
+      - description: QDMA1 base address
+
+  reg-names:
+    items:
+      - const: fe
+      - const: qdma0
+      - const: qdma1
+
+  interrupts:
+    items:
+      - description: QDMA lan irq0
+      - description: QDMA lan irq1
+      - description: QDMA lan irq2
+      - description: QDMA lan irq3
+      - description: QDMA wan irq0
+      - description: QDMA wan irq1
+      - description: QDMA wan irq2
+      - description: QDMA wan irq3
+      - description: FE error irq
+      - description: PDMA irq
+
+  resets:
+    maxItems: 8
+
+  reset-names:
+    items:
+      - const: fe
+      - const: pdma
+      - const: qdma
+      - const: xsi-mac
+      - const: hsi0-mac
+      - const: hsi1-mac
+      - const: hsi-mac
+      - const: xfp-mac
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^ethernet@[1-4]$":
+    type: object
+    unevaluatedProperties: false
+    $ref: ethernet-controller.yaml#
+    description:
+      Ethernet GMAC port associated to the MAC controller
+    properties:
+      compatible:
+        const: airoha,eth-mac
+
+      reg:
+        minimum: 1
+        maximum: 4
+        description: GMAC port identifier
+
+    required:
+      - reg
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/en7523-clk.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      eth: ethernet@1fb50000 {
+        compatible = "airoha,en7581-eth";
+        reg = <0 0x1fb50000 0 0x2600>,
+              <0 0x1fb54000 0 0x2000>,
+              <0 0x1fb56000 0 0x2000>;
+        reg-names = "fe", "qdma0", "qdma1";
+
+        resets = <&scuclk 44>,
+                 <&scuclk 30>,
+                 <&scuclk 31>,
+                 <&scuclk 6>,
+                 <&scuclk 15>,
+                 <&scuclk 16>,
+                 <&scuclk 17>,
+                 <&scuclk 26>;
+        reset-names = "fe", "pdma", "qdma", "xsi-mac",
+                      "hsi0-mac", "hsi1-mac", "hsi-mac",
+                      "xfp-mac";
+
+        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mac: ethernet@1 {
+          compatible = "airoha,eth-mac";
+          reg = <1>;
+        };
+      };
+    };
diff --git a/dts/upstream/Bindings/net/arc_emac.txt b/dts/upstream/Bindings/net/arc_emac.txt
deleted file mode 100644
index c73a0e9c625..00000000000
--- a/dts/upstream/Bindings/net/arc_emac.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Synopsys ARC EMAC 10/100 Ethernet driver (EMAC)
-
-Required properties:
-- compatible: Should be "snps,arc-emac"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the EMAC interrupts
-- max-speed: see ethernet.txt file in the same directory.
-- phy: see ethernet.txt file in the same directory.
-
-Optional properties:
-- phy-reset-gpios : Should specify the gpio for phy reset
-- phy-reset-duration : Reset duration in milliseconds.  Should present
-  only if property "phy-reset-gpios" is available.  Missing the property
-  will have the duration be 1 millisecond.  Numbers greater than 1000 are
-  invalid and 1 millisecond will be used instead.
-
-Clock handling:
-The clock frequency is needed to calculate and set polling period of EMAC.
-It must be provided by one of:
-- clock-frequency: CPU frequency.
-- clocks: reference to the clock supplying the EMAC.
-
-Child nodes of the driver are the individual PHY devices connected to the
-MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
-
-Examples:
-
-	ethernet@c0fc2000 {
-		compatible = "snps,arc-emac";
-		reg = <0xc0fc2000 0x3c>;
-		interrupts = <6>;
-		mac-address = [ 00 11 22 33 44 55 ];
-
-		clock-frequency = <80000000>;
-		/* or */
-		clocks = <&emac_clock>;
-
-		max-speed = <100>;
-		phy = <&phy0>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-		phy0: ethernet-phy@0 {
-			reg = <1>;
-		};
-	};
diff --git a/dts/upstream/Bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml b/dts/upstream/Bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml
new file mode 100644
index 00000000000..3f9e6920812
--- /dev/null
+++ b/dts/upstream/Bindings/net/bluetooth/mediatek,mt7622-bluetooth.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7622-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoC built-in Bluetooth
+
+description:
+  This device is a serial attached device to BTIF device and thus it must be a
+  child node of the serial node with BTIF. The dt-bindings details for BTIF
+  device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7622-bluetooth
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ref
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/mt7622-power.h>
+
+    serial {
+        bluetooth {
+            compatible = "mediatek,mt7622-bluetooth";
+            power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+            clocks = <&clk25m>;
+            clock-names = "ref";
+        };
+    };
diff --git a/dts/upstream/Bindings/net/bluetooth/nxp,88w8987-bt.yaml b/dts/upstream/Bindings/net/bluetooth/nxp,88w8987-bt.yaml
index f01a3988538..37a65badb44 100644
--- a/dts/upstream/Bindings/net/bluetooth/nxp,88w8987-bt.yaml
+++ b/dts/upstream/Bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -31,6 +31,9 @@ properties:
       This property depends on the module vendor's
       configuration.
 
+  firmware-name:
+    maxItems: 1
+
 required:
   - compatible
 
@@ -42,5 +45,6 @@ examples:
         bluetooth {
             compatible = "nxp,88w8987-bt";
             fw-init-baudrate = <3000000>;
+            firmware-name = "uartuart8987_bt_v0.bin";
         };
     };
diff --git a/dts/upstream/Bindings/net/bluetooth/qualcomm-bluetooth.yaml b/dts/upstream/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
index 055a3351880..68c5ed11141 100644
--- a/dts/upstream/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/dts/upstream/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -62,6 +62,9 @@ properties:
   vdddig-supply:
     description: VDD_DIG supply regulator handle
 
+  vddbtcmx-supply:
+    description: VDD_BT_CMX supply regulator handle
+
   vddbtcxmx-supply:
     description: VDD_BT_CXMX supply regulator handle
 
@@ -74,6 +77,9 @@ properties:
   vddrfa1p7-supply:
     description: VDD_RFA_1P7 supply regulator handle
 
+  vddrfa1p8-supply:
+    description: VDD_RFA_1P8 supply regulator handle
+
   vddrfa1p2-supply:
     description: VDD_RFA_1P2 supply regulator handle
 
@@ -86,6 +92,12 @@ properties:
   vddasd-supply:
     description: VDD_ASD supply regulator handle
 
+  vddwlcx-supply:
+    description: VDD_WLCX supply regulator handle
+
+  vddwlmx-supply:
+    description: VDD_WLMX supply regulator handle
+
   max-speed:
     description: see Documentation/devicetree/bindings/serial/serial.yaml
 
@@ -176,14 +188,27 @@ allOf:
               - qcom,wcn7850-bt
     then:
       required:
-        - enable-gpios
-        - swctrl-gpios
-        - vddio-supply
+        - vddrfacmn-supply
+        - vddaon-supply
+        - vddwlcx-supply
+        - vddwlmx-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p8-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qca6390-bt
+    then:
+      required:
+        - vddrfacmn-supply
         - vddaon-supply
-        - vdddig-supply
+        - vddbtcmx-supply
         - vddrfa0p8-supply
         - vddrfa1p2-supply
-        - vddrfa1p9-supply
+        - vddrfa1p7-supply
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/net/can/xilinx,can.yaml b/dts/upstream/Bindings/net/can/xilinx,can.yaml
index 8d4e5af6fd6..40835497050 100644
--- a/dts/upstream/Bindings/net/can/xilinx,can.yaml
+++ b/dts/upstream/Bindings/net/can/xilinx,can.yaml
@@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/net/can/xilinx,can.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title:
-  Xilinx Axi CAN/Zynq CANPS controller
+  Xilinx CAN and CANFD controller
 
 maintainers:
   - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
diff --git a/dts/upstream/Bindings/net/cdns,macb.yaml b/dts/upstream/Bindings/net/cdns,macb.yaml
index 2c71e2cf3a2..3c30dd23cd4 100644
--- a/dts/upstream/Bindings/net/cdns,macb.yaml
+++ b/dts/upstream/Bindings/net/cdns,macb.yaml
@@ -146,6 +146,7 @@ patternProperties:
 
       magic-packet:
         type: boolean
+        deprecated: true
         description:
           Indicates that the hardware supports waking up via magic packet.
 
diff --git a/dts/upstream/Bindings/net/dsa/lantiq,gswip.yaml b/dts/upstream/Bindings/net/dsa/lantiq,gswip.yaml
new file mode 100644
index 00000000000..f3154b19af7
--- /dev/null
+++ b/dts/upstream/Bindings/net/dsa/lantiq,gswip.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq GSWIP Ethernet switches
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+maintainers:
+  - Hauke Mehrtens <hauke@hauke-m.de>
+
+properties:
+  compatible:
+    enum:
+      - lantiq,xrx200-gswip
+      - lantiq,xrx300-gswip
+      - lantiq,xrx330-gswip
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: switch
+      - const: mdio
+      - const: mii
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: lantiq,xrx200-mdio
+
+    required:
+      - compatible
+
+  gphy-fw:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      compatible:
+        items:
+          - enum:
+              - lantiq,xrx200-gphy-fw
+              - lantiq,xrx300-gphy-fw
+              - lantiq,xrx330-gphy-fw
+          - const: lantiq,gphy-fw
+
+      lantiq,rcu:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to the RCU syscon
+
+    patternProperties:
+      "^gphy@[0-9a-f]{1,2}$":
+        type: object
+
+        additionalProperties: false
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 255
+            description:
+              Offset of the GPHY firmware register in the RCU register range
+
+          resets:
+            items:
+              - description: GPHY reset line
+
+          reset-names:
+            items:
+              - const: gphy
+
+        required:
+          - reg
+
+    required:
+      - compatible
+      - lantiq,rcu
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    switch@e108000 {
+            compatible = "lantiq,xrx200-gswip";
+            reg = <0xe108000 0x3100>,  /* switch */
+                  <0xe10b100 0xd8>,    /* mdio */
+                  <0xe10b1d8 0x130>;   /* mii */
+            dsa,member = <0 0>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            reg = <0>;
+                            label = "lan3";
+                            phy-mode = "rgmii";
+                            phy-handle = <&phy0>;
+                    };
+
+                    port@1 {
+                            reg = <1>;
+                            label = "lan4";
+                            phy-mode = "rgmii";
+                            phy-handle = <&phy1>;
+                    };
+
+                    port@2 {
+                            reg = <2>;
+                            label = "lan2";
+                            phy-mode = "internal";
+                            phy-handle = <&phy11>;
+                    };
+
+                    port@4 {
+                            reg = <4>;
+                            label = "lan1";
+                            phy-mode = "internal";
+                            phy-handle = <&phy13>;
+                    };
+
+                    port@5 {
+                            reg = <5>;
+                            label = "wan";
+                            phy-mode = "rgmii";
+                            phy-handle = <&phy5>;
+                    };
+
+                    port@6 {
+                            reg = <0x6>;
+                            phy-mode = "internal";
+                            ethernet = <&eth0>;
+
+                            fixed-link {
+                                    speed = <1000>;
+                                    full-duplex;
+                            };
+                    };
+            };
+
+            mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    compatible = "lantiq,xrx200-mdio";
+
+                    phy0: ethernet-phy@0 {
+                            reg = <0x0>;
+                    };
+                    phy1: ethernet-phy@1 {
+                            reg = <0x1>;
+                    };
+                    phy5: ethernet-phy@5 {
+                            reg = <0x5>;
+                    };
+                    phy11: ethernet-phy@11 {
+                            reg = <0x11>;
+                    };
+                    phy13: ethernet-phy@13 {
+                            reg = <0x13>;
+                    };
+            };
+
+            gphy-fw {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
+                    lantiq,rcu = <&rcu0>;
+
+                    gphy@20 {
+                            reg = <0x20>;
+
+                            resets = <&reset0 31 30>;
+                            reset-names = "gphy";
+                    };
+
+                    gphy@68 {
+                            reg = <0x68>;
+
+                            resets = <&reset0 29 28>;
+                            reset-names = "gphy";
+                    };
+            };
+    };
diff --git a/dts/upstream/Bindings/net/dsa/lantiq-gswip.txt b/dts/upstream/Bindings/net/dsa/lantiq-gswip.txt
deleted file mode 100644
index 8bb1eff21cb..00000000000
--- a/dts/upstream/Bindings/net/dsa/lantiq-gswip.txt
+++ /dev/null
@@ -1,146 +0,0 @@
-Lantiq GSWIP Ethernet switches
-==================================
-
-Required properties for GSWIP core:
-
-- compatible	: "lantiq,xrx200-gswip" for the embedded GSWIP in the
-		  xRX200 SoC
-		  "lantiq,xrx300-gswip" for the embedded GSWIP in the
-		  xRX300 SoC
-		  "lantiq,xrx330-gswip" for the embedded GSWIP in the
-		  xRX330 SoC
-- reg		: memory range of the GSWIP core registers
-		: memory range of the GSWIP MDIO registers
-		: memory range of the GSWIP MII registers
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of
-additional required and optional properties.
-
-
-Required properties for MDIO bus:
-- compatible	: "lantiq,xrx200-mdio" for the MDIO bus inside the GSWIP
-		  core of the xRX200 SoC and the PHYs connected to it.
-
-See Documentation/devicetree/bindings/net/mdio.txt for a list of additional
-required and optional properties.
-
-
-Required properties for GPHY firmware loading:
-- compatible	: "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"
-		  "lantiq,xrx300-gphy-fw", "lantiq,gphy-fw"
-		  "lantiq,xrx330-gphy-fw", "lantiq,gphy-fw"
-		  for the loading of the firmware into the embedded
-		  GPHY core of the SoC.
-- lantiq,rcu	: reference to the rcu syscon
-
-The GPHY firmware loader has a list of GPHY entries, one for each
-embedded GPHY
-
-- reg		: Offset of the GPHY firmware register in the RCU
-		  register range
-- resets	: list of resets of the embedded GPHY
-- reset-names	: list of names of the resets
-
-Example:
-
-Ethernet switch on the VRX200 SoC:
-
-switch@e108000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "lantiq,xrx200-gswip";
-	reg = <	0xe108000 0x3100	/* switch */
-		0xe10b100 0xd8		/* mdio */
-		0xe10b1d8 0x130		/* mii */
-		>;
-	dsa,member = <0 0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			label = "lan3";
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan4";
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-			phy-mode = "internal";
-			phy-handle = <&phy11>;
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "lan1";
-			phy-mode = "internal";
-			phy-handle = <&phy13>;
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "wan";
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-
-		port@6 {
-			reg = <0x6>;
-			ethernet = <&eth0>;
-		};
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		reg = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-		};
-		phy5: ethernet-phy@5 {
-			reg = <0x5>;
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-		};
-	};
-
-	gphy-fw {
-		compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
-		lantiq,rcu = <&rcu0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gphy@20 {
-			reg = <0x20>;
-
-			resets = <&reset0 31 30>;
-			reset-names = "gphy";
-		};
-
-		gphy@68 {
-			reg = <0x68>;
-
-			resets = <&reset0 29 28>;
-			reset-names = "gphy";
-		};
-	};
-};
diff --git a/dts/upstream/Bindings/net/dsa/mediatek,mt7530.yaml b/dts/upstream/Bindings/net/dsa/mediatek,mt7530.yaml
index 1c2444121e6..7e405ad96eb 100644
--- a/dts/upstream/Bindings/net/dsa/mediatek,mt7530.yaml
+++ b/dts/upstream/Bindings/net/dsa/mediatek,mt7530.yaml
@@ -22,16 +22,16 @@ description: |
 
   The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four
   Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's
-  memory map rather than using MDIO. The switch got an internally connected 10G
+  memory map rather than using MDIO. The switch has an internally connected 10G
   CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs.
 
-  MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
+  The MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has 10/100 PHYs
   and the switch registers are directly mapped into SoC's memory map rather than
   using MDIO. The DSA driver currently doesn't support MT7620 variants.
 
   There is only the standalone version of MT7531.
 
-  Port 5 on MT7530 has got various ways of configuration:
+  Port 5 on MT7530 supports various configurations:
 
     - Port 5 can be used as a CPU port.
 
diff --git a/dts/upstream/Bindings/net/dsa/vitesse,vsc73xx.txt b/dts/upstream/Bindings/net/dsa/vitesse,vsc73xx.txt
deleted file mode 100644
index 258bef48367..00000000000
--- a/dts/upstream/Bindings/net/dsa/vitesse,vsc73xx.txt
+++ /dev/null
@@ -1,129 +0,0 @@
-Vitesse VSC73xx Switches
-========================
-
-This defines device tree bindings for the Vitesse VSC73xx switch chips.
-The Vitesse company has been acquired by Microsemi and Microsemi has
-been acquired Microchip but retains this vendor branding.
-
-The currently supported switch chips are:
-Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
-Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
-Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
-Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
-
-This switch could have two different management interface.
-
-If SPI interface is used, the device tree node is an SPI device so it must
-reside inside a SPI bus device tree node, see spi/spi-bus.txt
-
-When the chip is connected to a parallel memory bus and work in memory-mapped
-I/O mode, a platform device is used to represent the vsc73xx. In this case it
-must reside inside a platform bus device tree node.
-
-Required properties:
-
-- compatible: must be exactly one of:
-	"vitesse,vsc7385"
-	"vitesse,vsc7388"
-	"vitesse,vsc7395"
-	"vitesse,vsc7398"
-- gpio-controller: indicates that this switch is also a GPIO controller,
-  see gpio/gpio.txt
-- #gpio-cells: this must be set to <2> and indicates that we are a twocell
-  GPIO controller, see gpio/gpio.txt
-
-Optional properties:
-
-- reset-gpios: a handle to a GPIO line that can issue reset of the chip.
-  It should be tagged as active low.
-
-Required subnodes:
-
-See net/dsa/dsa.txt for a list of additional required and optional properties
-and subnodes of DSA switches.
-
-Examples:
-
-SPI:
-switch@0 {
-	compatible = "vitesse,vsc7395";
-	reg = <0>;
-	/* Specified for 2.5 MHz or below */
-	spi-max-frequency = <2500000>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-		};
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-		};
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-		};
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-		};
-		vsc: port@6 {
-			reg = <6>;
-			ethernet = <&gmac1>;
-			phy-mode = "rgmii";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-		};
-	};
-};
-
-Platform:
-switch@2,0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "vitesse,vsc7385";
-	reg = <0x2 0x0 0x20000>;
-	reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			label = "lan1";
-		};
-		port@1 {
-			reg = <1>;
-			label = "lan2";
-		};
-		port@2 {
-			reg = <2>;
-			label = "lan3";
-		};
-		port@3 {
-			reg = <3>;
-			label = "lan4";
-		};
-		vsc: port@6 {
-			reg = <6>;
-			ethernet = <&enet0>;
-			phy-mode = "rgmii";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-		};
-	};
-
-};
diff --git a/dts/upstream/Bindings/net/dsa/vitesse,vsc73xx.yaml b/dts/upstream/Bindings/net/dsa/vitesse,vsc73xx.yaml
new file mode 100644
index 00000000000..b99d7a694b7
--- /dev/null
+++ b/dts/upstream/Bindings/net/dsa/vitesse,vsc73xx.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/vitesse,vsc73xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vitesse VSC73xx DSA Switches
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The Vitesse DSA Switches were produced in the early-to-mid 2000s.
+
+  The Vitesse company has been acquired by Microsemi and Microsemi has
+  been acquired Microchip but the new owner retains this vendor branding.
+
+  The currently supported switch chips are
+  Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
+  Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
+  Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
+  Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
+
+  This switch can use one of two different management interfaces.
+
+  If SPI interface is used, the device tree node is an SPI device so it must
+  reside inside a SPI bus device tree node, see spi/spi-bus.txt
+
+  When the chip is connected to a parallel memory bus and work in memory-mapped
+  I/O mode, a platform device is used to represent the vsc73xx. In this case it
+  must reside inside a platform bus device tree node.
+
+properties:
+  compatible:
+    enum:
+      - vitesse,vsc7385
+      - vitesse,vsc7388
+      - vitesse,vsc7395
+      - vitesse,vsc7398
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+  "#gpio-cells":
+    const: 2
+
+  reset-gpios:
+    description: GPIO to be used to reset the whole device
+    maxItems: 1
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+# This checks if reg is a chipselect so the device is on an SPI
+# bus, the if-clause will fail if reg is a tuple such as for a
+# platform device.
+if:
+  properties:
+    reg:
+      minimum: 0
+      maximum: 256
+then:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ethernet-switch@0 {
+        compatible = "vitesse,vsc7395";
+        reg = <0>;
+        spi-max-frequency = <2500000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        ethernet-ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          ethernet-port@0 {
+            reg = <0>;
+            label = "lan1";
+          };
+          ethernet-port@1 {
+            reg = <1>;
+            label = "lan2";
+          };
+          ethernet-port@2 {
+            reg = <2>;
+            label = "lan3";
+          };
+          ethernet-port@3 {
+            reg = <3>;
+            label = "lan4";
+          };
+          ethernet-port@6 {
+            reg = <6>;
+            ethernet = <&gmac1>;
+            phy-mode = "rgmii";
+            fixed-link {
+              speed = <1000>;
+              full-duplex;
+              pause;
+            };
+          };
+        };
+      };
+    };
+
+    bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      ethernet-switch@10000000 {
+        compatible = "vitesse,vsc7385";
+        reg = <0x10000000 0x20000>;
+        reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+
+        ethernet-ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          ethernet-port@0 {
+            reg = <0>;
+            label = "lan1";
+          };
+          ethernet-port@1 {
+            reg = <1>;
+            label = "lan2";
+          };
+          ethernet-port@2 {
+            reg = <2>;
+            label = "lan3";
+          };
+          ethernet-port@3 {
+            reg = <3>;
+            label = "lan4";
+          };
+          ethernet-port@6 {
+            reg = <6>;
+            ethernet = <&enet0>;
+            phy-mode = "rgmii";
+            fixed-link {
+              speed = <1000>;
+              full-duplex;
+              pause;
+            };
+          };
+        };
+      };
+    };
diff --git a/dts/upstream/Bindings/net/ethernet-controller.yaml b/dts/upstream/Bindings/net/ethernet-controller.yaml
index b2785b03139..45819b23580 100644
--- a/dts/upstream/Bindings/net/ethernet-controller.yaml
+++ b/dts/upstream/Bindings/net/ethernet-controller.yaml
@@ -103,6 +103,7 @@ properties:
       - usxgmii
       - 10gbase-r
       - 25gbase-r
+      - 10g-qxgmii
 
   phy-mode:
     $ref: "#/properties/phy-connection-type"
diff --git a/dts/upstream/Bindings/net/ethernet-phy.yaml b/dts/upstream/Bindings/net/ethernet-phy.yaml
index 8fb2a6ee7e5..d9b62741a22 100644
--- a/dts/upstream/Bindings/net/ethernet-phy.yaml
+++ b/dts/upstream/Bindings/net/ethernet-phy.yaml
@@ -93,6 +93,14 @@ properties:
       the turn around line low at end of the control phase of the
       MDIO transaction.
 
+  brr-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates the network cable interface is an alternative one as
+      defined in the BroadR-Reach link mode specification under 1BR-100 and
+      1BR-10 names. The PHY must be configured to operate in BroadR-Reach mode
+      by software.
+
   clocks:
     maxItems: 1
     description:
diff --git a/dts/upstream/Bindings/net/fsl,enetc-ierb.yaml b/dts/upstream/Bindings/net/fsl,enetc-ierb.yaml
new file mode 100644
index 00000000000..c8a654310b9
--- /dev/null
+++ b/dts/upstream/Bindings/net/fsl,enetc-ierb.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,enetc-ierb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Integrated Endpoint Register Block
+
+description:
+  The fsl_enetc driver can probe on the Integrated Endpoint Register Block,
+  which preconfigures the FIFO limits for the ENETC ports.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Wei Fang <wei.fang@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1028a-enetc-ierb
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    endpoint-config@f0800000 {
+        compatible = "fsl,ls1028a-enetc-ierb";
+        reg = <0xf0800000 0x10000>;
+    };
diff --git a/dts/upstream/Bindings/net/fsl,enetc-mdio.yaml b/dts/upstream/Bindings/net/fsl,enetc-mdio.yaml
new file mode 100644
index 00000000000..c1dd6aa0432
--- /dev/null
+++ b/dts/upstream/Bindings/net/fsl,enetc-mdio.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,enetc-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENETC external MDIO PCIe endpoint device
+
+description:
+  NETC provides an external master MDIO interface (EMDIO) for managing external
+  devices (PHYs). EMDIO supports both Clause 22 and 45 protocols. And the EMDIO
+  provides a means for different software modules to share a single set of MDIO
+  signals to access their PHYs.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Wei Fang <wei.fang@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - pci1957,ee01
+      - const: fsl,enetc-mdio
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: mdio.yaml
+  - $ref: /schemas/pci/pci-device.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pcie{
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        mdio@0,3 {
+            compatible = "pci1957,ee01", "fsl,enetc-mdio";
+            reg = <0x000300 0 0 0 0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@2 {
+                reg = <0x2>;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/net/fsl,enetc.yaml b/dts/upstream/Bindings/net/fsl,enetc.yaml
new file mode 100644
index 00000000000..e152c93998f
--- /dev/null
+++ b/dts/upstream/Bindings/net/fsl,enetc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,enetc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The NIC functionality of NXP NETC
+
+description:
+  The NIC functionality in NETC is known as EtherNET Controller (ENETC). ENETC
+  supports virtualization/isolation based on PCIe Single Root IO Virtualization
+  (SR-IOV), advanced QoS with 8 traffic classes and 4 drop resilience levels,
+  and a full range of TSN standards and NIC offload capabilities
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Wei Fang <wei.fang@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - pci1957,e100
+      - const: fsl,enetc
+
+  reg:
+    maxItems: 1
+
+  mdio:
+    $ref: mdio.yaml
+    unevaluatedProperties: false
+    description: Optional child node for ENETC instance, otherwise use NETC EMDIO.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/pci/pci-device.yaml
+  - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pcie {
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        ethernet@0,0 {
+            compatible = "pci1957,e100", "fsl,enetc";
+            reg = <0x000000 0 0 0 0>;
+            phy-handle = <&sgmii_phy0>;
+            phy-connection-type = "sgmii";
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                phy@2 {
+                    reg = <0x2>;
+                };
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/net/fsl,fman-mdio.yaml b/dts/upstream/Bindings/net/fsl,fman-mdio.yaml
new file mode 100644
index 00000000000..6b2c0aa407a
--- /dev/null
+++ b/dts/upstream/Bindings/net/fsl,fman-mdio.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager MDIO Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: FMan MDIO Node.
+  The MDIO is a bus to which the PHY devices are connected.
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-mdio
+      - fsl,fman-xmdio
+      - fsl,fman-memac-mdio
+    description:
+      Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
+      Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
+      Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
+      FMan v3.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: A reference to the input clock of the controller
+          from which the MDC frequency is derived.
+
+  interrupts:
+    maxItems: 1
+
+  fsl,fman-internal-mdio:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Fman has internal MDIO for internal PCS(Physical
+      Coding Sublayer) PHYs and external MDIO for external PHYs.
+      The settings and programming routines for internal/external
+      MDIO are different. Must be included for internal MDIO.
+
+  fsl,erratum-a009885:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Indicates the presence of the A009885
+      erratum describing that the contents of MDIO_DATA may
+      become corrupt unless it is read within 16 MDC cycles
+      of MDIO_CFG[BSY] being cleared, when performing an
+      MDIO read operation.
+
+  fsl,erratum-a011043:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates the presence of the A011043 erratum
+      describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely
+      set when reading internal PCS registers. MDIO reads to
+      internal PCS registers may result in having the
+      MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and
+      read data (MDIO_DATA[MDIO_DATA]) is correct.
+      Software may get false read error when reading internal
+      PCS registers through MDIO. As a workaround, all internal
+      MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
+
+      For internal PHY device on internal mdio bus, a PHY node should be created.
+      See the definition of the PHY node in booting-without-of.txt for an
+      example of how to define a PHY (Internal PHY has no interrupt line).
+      - For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
+      - For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY.
+        The PCS PHY address should correspond to the value of the appropriate
+        MDEV_PORT.
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      IP block is little-endian mode. The default endian mode is big-endian.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: mdio.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@f1000 {
+        compatible = "fsl,fman-xmdio";
+        reg = <0xf1000 0x1000>;
+        interrupts = <101 2 0 0>;
+    };
+
+  - |
+    mdio@e3120 {
+        compatible = "fsl,fman-mdio";
+        reg = <0xe3120 0xee0>;
+        fsl,fman-internal-mdio;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tbi-phy@8 {
+            reg = <0x8>;
+            device_type = "tbi-phy";
+        };
+    };
+
+  - |
+    mdio@f1000 {
+        compatible = "fsl,fman-memac-mdio";
+        reg = <0xf1000 0x1000>;
+        fsl,fman-internal-mdio;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pcsphy6: ethernet-phy@0 {
+            reg = <0x0>;
+        };
+    };
+
diff --git a/dts/upstream/Bindings/net/fsl,fman-muram.yaml b/dts/upstream/Bindings/net/fsl,fman-muram.yaml
new file mode 100644
index 00000000000..aa71acc7fa5
--- /dev/null
+++ b/dts/upstream/Bindings/net/fsl,fman-muram.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-muram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager MURAM Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  FMan Internal memory - shared between all the FMan modules.
+  It contains data structures that are common and written to or read by
+  the modules.
+
+  FMan internal memory is split into the following parts:
+    Packet buffering (Tx/Rx FIFOs)
+    Frames internal context
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-muram
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    muram@0 {
+        compatible = "fsl,fman-muram";
+        reg = <0x0 0x28000>;
+    };
diff --git a/dts/upstream/Bindings/net/fsl,fman-port.yaml b/dts/upstream/Bindings/net/fsl,fman-port.yaml
new file mode 100644
index 00000000000..9de44530783
--- /dev/null
+++ b/dts/upstream/Bindings/net/fsl,fman-port.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager Port Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Frame Manager (FMan) supports several types of hardware ports:
+    Ethernet receiver (RX)
+    Ethernet transmitter (TX)
+    Offline/Host command (O/H)
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-v2-port-oh
+      - fsl,fman-v2-port-rx
+      - fsl,fman-v2-port-tx
+      - fsl,fman-v3-port-oh
+      - fsl,fman-v3-port-rx
+      - fsl,fman-v3-port-tx
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies the hardware port id.
+      Each hardware port on the FMan has its own hardware PortID.
+      Super set of all hardware Port IDs available at FMan Reference
+      Manual under "FMan Hardware Ports in Freescale Devices" table.
+
+      Each hardware port is assigned a 4KB, port-specific page in
+      the FMan hardware port memory region (which is part of the
+      FMan memory map). The first 4 KB in the FMan hardware ports
+      memory region is used for what are called common registers.
+      The subsequent 63 4KB pages are allocated to the hardware
+      ports.
+      The page of a specific port is determined by the cell-index.
+
+  reg:
+    items:
+      - description: There is one reg region describing the port
+          configuration registers.
+
+  fsl,fman-10g-port:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The default port rate is 1G.
+      If this property exists, the port is s 10G port.
+
+  fsl,fman-best-effort-port:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The default port rate is 1G.
+      Can be defined only if 10G-support is set.
+      This property marks a best-effort 10G port (10G port that
+      may not be capable of line rate).
+
+required:
+  - compatible
+  - reg
+  - cell-index
+
+additionalProperties: false
+
+examples:
+  - |
+    port@a8000 {
+        compatible = "fsl,fman-v2-port-tx";
+        reg = <0xa8000 0x1000>;
+        cell-index = <0x28>;
+    };
+
diff --git a/dts/upstream/Bindings/net/fsl,fman.yaml b/dts/upstream/Bindings/net/fsl,fman.yaml
new file mode 100644
index 00000000000..9bbf39ef31a
--- /dev/null
+++ b/dts/upstream/Bindings/net/fsl,fman.yaml
@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Frame Manager Device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
+  etc.) the FMan node will have child nodes for each of them.
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman
+    description:
+      FMan version can be determined via FM_IP_REV_1 register in the
+      FMan block. The offset is 0xc4 from the beginning of the
+      Frame Processing Manager memory map (0xc3000 from the
+      beginning of the FMan node).
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the index of the FMan unit.
+
+      The cell-index value may be used by the SoC, to identify the
+      FMan unit in the SoC memory map. In the table below,
+      there's a description of the cell-index use in each SoC:
+
+      - P1023:
+      register[bit]      FMan unit  cell-index
+      ============================================================
+      DEVDISR[1]      1    0
+
+      - P2041, P3041, P4080 P5020, P5040:
+      register[bit]      FMan unit  cell-index
+      ============================================================
+      DCFG_DEVDISR2[6]    1    0
+      DCFG_DEVDISR2[14]    2    1
+        (Second FM available only in P4080 and P5040)
+
+      - B4860, T1040, T2080, T4240:
+      register[bit]      FMan unit  cell-index
+      ============================================================
+      DCFG_CCSR_DEVDISR2[24]    1    0
+      DCFG_CCSR_DEVDISR2[25]    2    1
+        (Second FM available only in T4240)
+
+      DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+      the specific SoC "Device Configuration/Pin Control" Memory
+      Map.
+
+  reg:
+    items:
+      - description: BMI configuration registers.
+      - description: QMI configuration registers.
+      - description: DMA configuration registers.
+      - description: FPM configuration registers.
+      - description: FMan controller configuration registers.
+    minItems: 1
+
+  ranges: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fmanclk
+
+  interrupts:
+    items:
+      - description: The first element is associated with the event interrupts.
+      - description: the second element is associated with the error interrupts.
+
+  dma-coherent: true
+
+  ptimer-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: see ptp/fsl,ptp.yaml
+
+  fsl,qman-channel-range:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Specifies the range of the available dedicated
+      channels in the FMan. The first cell specifies the beginning
+      of the range and the second cell specifies the number of
+      channels
+    items:
+      - description: The first cell specifies the beginning of the range.
+      - description: |
+          The second cell specifies the number of channels.
+          Further information available at:
+          "Work Queue (WQ) Channel Assignments in the QMan" section
+          in DPAA Reference Manual.
+
+  fsl,qman:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: See soc/fsl/qman.txt
+
+  fsl,bman:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: See soc/fsl/bman.txt
+
+  fsl,erratum-a050385:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: A boolean property. Indicates the presence of the
+      erratum A050385 which indicates that DMA transactions that are
+      split can result in a FMan lock.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  '^muram@[a-f0-9]+$':
+    $ref: fsl,fman-muram.yaml
+
+  '^port@[a-f0-9]+$':
+    $ref: fsl,fman-port.yaml
+
+  '^ethernet@[a-f0-9]+$':
+    $ref: fsl,fman-dtsec.yaml
+
+  '^mdio@[a-f0-9]+$':
+    $ref: fsl,fman-mdio.yaml
+
+  '^phc@[a-f0-9]+$':
+    $ref: /schemas/ptp/fsl,ptp.yaml
+
+required:
+  - compatible
+  - cell-index
+  - reg
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+  - fsl,qman-channel-range
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    fman@400000 {
+        compatible = "fsl,fman";
+        reg = <0x400000 0x100000>;
+        ranges = <0 0x400000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        cell-index = <1>;
+        clocks = <&fman_clk>;
+        clock-names = "fmanclk";
+        interrupts = <96 IRQ_TYPE_EDGE_FALLING>,
+                     <16 IRQ_TYPE_EDGE_FALLING>;
+        fsl,qman-channel-range = <0x40 0xc>;
+
+        muram@0 {
+            compatible = "fsl,fman-muram";
+            reg = <0x0 0x28000>;
+        };
+
+        port@81000 {
+            cell-index = <1>;
+            compatible = "fsl,fman-v2-port-oh";
+            reg = <0x81000 0x1000>;
+        };
+
+        fman1_rx_0x8: port@88000 {
+            cell-index = <0x8>;
+            compatible = "fsl,fman-v2-port-rx";
+            reg = <0x88000 0x1000>;
+        };
+
+        fman1_tx_0x28: port@a8000 {
+            cell-index = <0x28>;
+            compatible = "fsl,fman-v2-port-tx";
+            reg = <0xa8000 0x1000>;
+        };
+
+        ethernet@e0000 {
+            compatible = "fsl,fman-dtsec";
+            cell-index = <0>;
+            reg = <0xe0000 0x1000>;
+            ptp-timer = <&ptp_timer>;
+            fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+            tbi-handle = <&tbi5>;
+        };
+
+        ptp_timer: phc@fe000 {
+            compatible = "fsl,fman-ptp-timer";
+            reg = <0xfe000 0x1000>;
+            interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        };
+
+        mdio@f1000 {
+            compatible = "fsl,fman-xmdio";
+            reg = <0xf1000 0x1000>;
+            interrupts = <101 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/dts/upstream/Bindings/net/fsl,qoriq-mc-dpmac.yaml b/dts/upstream/Bindings/net/fsl,qoriq-mc-dpmac.yaml
index a1b71b35319..42f9843d186 100644
--- a/dts/upstream/Bindings/net/fsl,qoriq-mc-dpmac.yaml
+++ b/dts/upstream/Bindings/net/fsl,qoriq-mc-dpmac.yaml
@@ -38,6 +38,10 @@ properties:
 
   managed: true
 
+  phys:
+    description: A reference to the SerDes lane(s)
+    maxItems: 1
+
 required:
   - reg
 
diff --git a/dts/upstream/Bindings/net/fsl-enetc.txt b/dts/upstream/Bindings/net/fsl-enetc.txt
deleted file mode 100644
index 9b9a3f197e2..00000000000
--- a/dts/upstream/Bindings/net/fsl-enetc.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-* ENETC ethernet device tree bindings
-
-Depending on board design and ENETC port type (internal or
-external) there are two supported link modes specified by
-below device tree bindings.
-
-Required properties:
-
-- reg		: Specifies PCIe Device Number and Function
-		  Number of the ENETC endpoint device, according
-		  to parent node bindings.
-- compatible	: Should be "fsl,enetc".
-
-1. The ENETC external port is connected to a MDIO configurable phy
-
-1.1. Using the local ENETC Port MDIO interface
-
-In this case, the ENETC node should include a "mdio" sub-node
-that in turn should contain the "ethernet-phy" node describing the
-external phy.  Below properties are required, their bindings
-already defined in Documentation/devicetree/bindings/net/ethernet.txt or
-Documentation/devicetree/bindings/net/phy.txt.
-
-Required:
-
-- phy-handle		: Phandle to a PHY on the MDIO bus.
-			  Defined in ethernet.txt.
-
-- phy-connection-type	: Defined in ethernet.txt.
-
-- mdio			: "mdio" node, defined in mdio.txt.
-
-- ethernet-phy		: "ethernet-phy" node, defined in phy.txt.
-
-Example:
-
-	ethernet@0,0 {
-		compatible = "fsl,enetc";
-		reg = <0x000000 0 0 0 0>;
-		phy-handle = <&sgmii_phy0>;
-		phy-connection-type = "sgmii";
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			sgmii_phy0: ethernet-phy@2 {
-				reg = <0x2>;
-			};
-		};
-	};
-
-1.2. Using the central MDIO PCIe endpoint device
-
-In this case, the mdio node should be defined as another PCIe
-endpoint node, at the same level with the ENETC port nodes.
-
-Required properties:
-
-- reg		: Specifies PCIe Device Number and Function
-		  Number of the ENETC endpoint device, according
-		  to parent node bindings.
-- compatible	: Should be "fsl,enetc-mdio".
-
-The remaining required mdio bus properties are standard, their bindings
-already defined in Documentation/devicetree/bindings/net/mdio.txt.
-
-Example:
-
-	ethernet@0,0 {
-		compatible = "fsl,enetc";
-		reg = <0x000000 0 0 0 0>;
-		phy-handle = <&sgmii_phy0>;
-		phy-connection-type = "sgmii";
-	};
-
-	mdio@0,3 {
-		compatible = "fsl,enetc-mdio";
-		reg = <0x000300 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		sgmii_phy0: ethernet-phy@2 {
-			reg = <0x2>;
-		};
-	};
-
-2. The ENETC port is an internal port or has a fixed-link external
-connection
-
-In this case, the ENETC port node defines a fixed link connection,
-as specified by Documentation/devicetree/bindings/net/fixed-link.txt.
-
-Required:
-
-- fixed-link	: "fixed-link" node, defined in "fixed-link.txt".
-
-Example:
-	ethernet@0,2 {
-		compatible = "fsl,enetc";
-		reg = <0x000200 0 0 0 0>;
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-* Integrated Endpoint Register Block bindings
-
-Optionally, the fsl_enetc driver can probe on the Integrated Endpoint Register
-Block, which preconfigures the FIFO limits for the ENETC ports. This is a node
-with the following properties:
-
-- reg		: Specifies the address in the SoC memory space.
-- compatible	: Must be "fsl,ls1028a-enetc-ierb".
-
-Example:
-	ierb@1f0800000 {
-		compatible = "fsl,ls1028a-enetc-ierb";
-		reg = <0x01 0xf0800000 0x0 0x10000>;
-	};
diff --git a/dts/upstream/Bindings/net/fsl-fman.txt b/dts/upstream/Bindings/net/fsl-fman.txt
deleted file mode 100644
index bda4b41af07..00000000000
--- a/dts/upstream/Bindings/net/fsl-fman.txt
+++ /dev/null
@@ -1,548 +0,0 @@
-=============================================================================
-Freescale Frame Manager Device Bindings
-
-CONTENTS
-  - FMan Node
-  - FMan Port Node
-  - FMan MURAM Node
-  - FMan dTSEC/XGEC/mEMAC Node
-  - FMan IEEE 1588 Node
-  - FMan MDIO Node
-  - Example
-
-=============================================================================
-FMan Node
-
-DESCRIPTION
-
-Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
-etc.) the FMan node will have child nodes for each of them.
-
-PROPERTIES
-
-- compatible
-		Usage: required
-		Value type: <stringlist>
-		Definition: Must include "fsl,fman"
-		FMan version can be determined via FM_IP_REV_1 register in the
-		FMan block. The offset is 0xc4 from the beginning of the
-		Frame Processing Manager memory map (0xc3000 from the
-		beginning of the FMan node).
-
-- cell-index
-		Usage: required
-		Value type: <u32>
-		Definition: Specifies the index of the FMan unit.
-
-		The cell-index value may be used by the SoC, to identify the
-		FMan unit in the SoC memory map. In the table below,
-		there's a description of the cell-index use in each SoC:
-
-		- P1023:
-		register[bit]			FMan unit	cell-index
-		============================================================
-		DEVDISR[1]			1		0
-
-		- P2041, P3041, P4080 P5020, P5040:
-		register[bit]			FMan unit	cell-index
-		============================================================
-		DCFG_DEVDISR2[6]		1		0
-		DCFG_DEVDISR2[14]		2		1
-			(Second FM available only in P4080 and P5040)
-
-		- B4860, T1040, T2080, T4240:
-		register[bit]			FMan unit	cell-index
-		============================================================
-		DCFG_CCSR_DEVDISR2[24]		1		0
-		DCFG_CCSR_DEVDISR2[25]		2		1
-			(Second FM available only in T4240)
-
-		DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
-		the specific SoC "Device Configuration/Pin Control" Memory
-		Map.
-
-- reg
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: A standard property. Specifies the offset of the
-		following configuration registers:
-		- BMI configuration registers.
-		- QMI configuration registers.
-		- DMA configuration registers.
-		- FPM configuration registers.
-		- FMan controller configuration registers.
-
-- ranges
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: A standard property.
-
-- clocks
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: phandle for the fman input clock.
-
-- clock-names
-		usage: required
-		Value type: <stringlist>
-		Definition: "fmanclk" for the fman input clock.
-
-- interrupts
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: A pair of IRQs are specified in this property.
-		The first element is associated with the event interrupts and
-		the second element is associated with the error interrupts.
-
-- fsl,qman-channel-range
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: Specifies the range of the available dedicated
-		channels in the FMan. The first cell specifies the beginning
-		of the range and the second cell specifies the number of
-		channels.
-		Further information available at:
-		"Work Queue (WQ) Channel Assignments in the QMan" section
-		in DPAA Reference Manual.
-
-- fsl,qman
-- fsl,bman
-		Usage: required
-		Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
-
-- fsl,erratum-a050385
-		Usage: optional
-		Value type: boolean
-		Definition: A boolean property. Indicates the presence of the
-		erratum A050385 which indicates that DMA transactions that are
-		split can result in a FMan lock.
-
-=============================================================================
-FMan MURAM Node
-
-DESCRIPTION
-
-FMan Internal memory - shared between all the FMan modules.
-It contains data structures that are common and written to or read by
-the modules.
-FMan internal memory is split into the following parts:
-	Packet buffering (Tx/Rx FIFOs)
-	Frames internal context
-
-PROPERTIES
-
-- compatible
-		Usage: required
-		Value type: <stringlist>
-		Definition: Must include "fsl,fman-muram"
-
-- ranges
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: A standard property.
-		Specifies the multi-user memory offset and the size within
-		the FMan.
-
-EXAMPLE
-
-muram@0 {
-	compatible = "fsl,fman-muram";
-	ranges = <0 0x000000 0x28000>;
-};
-
-=============================================================================
-FMan Port Node
-
-DESCRIPTION
-
-The Frame Manager (FMan) supports several types of hardware ports:
-	Ethernet receiver (RX)
-	Ethernet transmitter (TX)
-	Offline/Host command (O/H)
-
-PROPERTIES
-
-- compatible
-		Usage: required
-		Value type: <stringlist>
-		Definition: A standard property.
-		Must include one of the following:
-			- "fsl,fman-v2-port-oh" for FManV2 OH ports
-			- "fsl,fman-v2-port-rx" for FManV2 RX ports
-			- "fsl,fman-v2-port-tx" for FManV2 TX ports
-			- "fsl,fman-v3-port-oh" for FManV3 OH ports
-			- "fsl,fman-v3-port-rx" for FManV3 RX ports
-			- "fsl,fman-v3-port-tx" for FManV3 TX ports
-
-- cell-index
-		Usage: required
-		Value type: <u32>
-		Definition: Specifies the hardware port id.
-		Each hardware port on the FMan has its own hardware PortID.
-		Super set of all hardware Port IDs available at FMan Reference
-		Manual under "FMan Hardware Ports in Freescale Devices" table.
-
-		Each hardware port is assigned a 4KB, port-specific page in
-		the FMan hardware port memory region (which is part of the
-		FMan memory map). The first 4 KB in the FMan hardware ports
-		memory region is used for what are called common registers.
-		The subsequent 63 4KB pages are allocated to the hardware
-		ports.
-		The page of a specific port is determined by the cell-index.
-
-- reg
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: There is one reg region describing the port
-		configuration registers.
-
-- fsl,fman-10g-port
-		Usage: optional
-		Value type: boolean
-		Definition: The default port rate is 1G.
-		If this property exists, the port is s 10G port.
-
-- fsl,fman-best-effort-port
-		Usage: optional
-		Value type: boolean
-		Definition: Can be defined only if 10G-support is set.
-		This property marks a best-effort 10G port (10G port that
-		may not be capable of line rate).
-
-EXAMPLE
-
-port@a8000 {
-	cell-index = <0x28>;
-	compatible = "fsl,fman-v2-port-tx";
-	reg = <0xa8000 0x1000>;
-};
-
-port@88000 {
-	cell-index = <0x8>;
-	compatible = "fsl,fman-v2-port-rx";
-	reg = <0x88000 0x1000>;
-};
-
-port@81000 {
-	cell-index = <0x1>;
-	compatible = "fsl,fman-v2-port-oh";
-	reg = <0x81000 0x1000>;
-};
-
-=============================================================================
-FMan dTSEC/XGEC/mEMAC Node
-
-Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
-
-============================================================================
-FMan IEEE 1588 Node
-
-Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
-
-=============================================================================
-FMan MDIO Node
-
-DESCRIPTION
-
-The MDIO is a bus to which the PHY devices are connected.
-
-PROPERTIES
-
-- compatible
-		Usage: required
-		Value type: <stringlist>
-		Definition: A standard property.
-		Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
-		Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
-		Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
-		FMan v3.
-
-- reg
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: A standard property.
-
-- clocks
-		Usage: optional
-		Value type: <phandle>
-		Definition: A reference to the input clock of the controller
-		from which the MDC frequency is derived.
-
-- clock-frequency
-		Usage: optional
-		Value type: <u32>
-		Definition: Specifies the external MDC frequency, in Hertz, to
-		be used. Requires that the input clock is specified in the
-		"clocks" property. See also: mdio.yaml.
-
-- suppress-preamble
-		Usage: optional
-		Value type: <boolean>
-		Definition: Disable generation of preamble bits. See also:
-		mdio.yaml.
-
-- interrupts
-		Usage: required for external MDIO
-		Value type: <prop-encoded-array>
-		Definition: Event interrupt of external MDIO controller.
-
-- fsl,fman-internal-mdio
-		Usage: required for internal MDIO
-		Value type: boolean
-		Definition: Fman has internal MDIO for internal PCS(Physical
-		Coding Sublayer) PHYs and external MDIO for external PHYs.
-		The settings and programming routines for internal/external
-		MDIO are different. Must be included for internal MDIO.
-
-- fsl,erratum-a009885
-		Usage: optional
-		Value type: <boolean>
-		Definition: Indicates the presence of the A009885
-		erratum describing that the contents of MDIO_DATA may
-		become corrupt unless it is read within 16 MDC cycles
-		of MDIO_CFG[BSY] being cleared, when performing an
-		MDIO read operation.
-
-- fsl,erratum-a011043
-		Usage: optional
-		Value type: <boolean>
-		Definition: Indicates the presence of the A011043 erratum
-		describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely
-		set when reading internal PCS registers. MDIO reads to
-		internal PCS registers may result in having the
-		MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and
-		read data (MDIO_DATA[MDIO_DATA]) is correct.
-		Software may get false read error when reading internal
-		PCS registers through MDIO. As a workaround, all internal
-		MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
-
-For internal PHY device on internal mdio bus, a PHY node should be created.
-See the definition of the PHY node in booting-without-of.txt for an
-example of how to define a PHY (Internal PHY has no interrupt line).
-- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
-- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY.
-  The PCS PHY address should correspond to the value of the appropriate
-  MDEV_PORT.
-
-EXAMPLE
-
-Example for FMan v2 external MDIO:
-
-mdio@f1000 {
-	compatible = "fsl,fman-xmdio";
-	reg = <0xf1000 0x1000>;
-	interrupts = <101 2 0 0>;
-};
-
-Example for FMan v2 internal MDIO:
-
-mdio@e3120 {
-	compatible = "fsl,fman-mdio";
-	reg = <0xe3120 0xee0>;
-	fsl,fman-internal-mdio;
-
-	tbi1: tbi-phy@8 {
-		reg = <0x8>;
-		device_type = "tbi-phy";
-	};
-};
-
-Example for FMan v3 internal MDIO:
-
-mdio@f1000 {
-	compatible = "fsl,fman-memac-mdio";
-	reg = <0xf1000 0x1000>;
-	fsl,fman-internal-mdio;
-
-	pcsphy6: ethernet-phy@0 {
-		reg = <0x0>;
-	};
-};
-
-=============================================================================
-Example
-
-fman@400000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	cell-index = <1>;
-	compatible = "fsl,fman"
-	ranges = <0 0x400000 0x100000>;
-	reg = <0x400000 0x100000>;
-	clocks = <&fman_clk>;
-	clock-names = "fmanclk";
-	interrupts = <
-		96 2 0 0
-		16 2 1 1>;
-	fsl,qman-channel-range = <0x40 0xc>;
-
-	muram@0 {
-		compatible = "fsl,fman-muram";
-		reg = <0x0 0x28000>;
-	};
-
-	port@81000 {
-		cell-index = <1>;
-		compatible = "fsl,fman-v2-port-oh";
-		reg = <0x81000 0x1000>;
-	};
-
-	port@82000 {
-		cell-index = <2>;
-		compatible = "fsl,fman-v2-port-oh";
-		reg = <0x82000 0x1000>;
-	};
-
-	port@83000 {
-		cell-index = <3>;
-		compatible = "fsl,fman-v2-port-oh";
-		reg = <0x83000 0x1000>;
-	};
-
-	port@84000 {
-		cell-index = <4>;
-		compatible = "fsl,fman-v2-port-oh";
-		reg = <0x84000 0x1000>;
-	};
-
-	port@85000 {
-		cell-index = <5>;
-		compatible = "fsl,fman-v2-port-oh";
-		reg = <0x85000 0x1000>;
-	};
-
-	port@86000 {
-		cell-index = <6>;
-		compatible = "fsl,fman-v2-port-oh";
-		reg = <0x86000 0x1000>;
-	};
-
-	fman1_rx_0x8: port@88000 {
-		cell-index = <0x8>;
-		compatible = "fsl,fman-v2-port-rx";
-		reg = <0x88000 0x1000>;
-	};
-
-	fman1_rx_0x9: port@89000 {
-		cell-index = <0x9>;
-		compatible = "fsl,fman-v2-port-rx";
-		reg = <0x89000 0x1000>;
-	};
-
-	fman1_rx_0xa: port@8a000 {
-		cell-index = <0xa>;
-		compatible = "fsl,fman-v2-port-rx";
-		reg = <0x8a000 0x1000>;
-	};
-
-	fman1_rx_0xb: port@8b000 {
-		cell-index = <0xb>;
-		compatible = "fsl,fman-v2-port-rx";
-		reg = <0x8b000 0x1000>;
-	};
-
-	fman1_rx_0xc: port@8c000 {
-		cell-index = <0xc>;
-		compatible = "fsl,fman-v2-port-rx";
-		reg = <0x8c000 0x1000>;
-	};
-
-	fman1_rx_0x10: port@90000 {
-		cell-index = <0x10>;
-		compatible = "fsl,fman-v2-port-rx";
-		reg = <0x90000 0x1000>;
-	};
-
-	fman1_tx_0x28: port@a8000 {
-		cell-index = <0x28>;
-		compatible = "fsl,fman-v2-port-tx";
-		reg = <0xa8000 0x1000>;
-	};
-
-	fman1_tx_0x29: port@a9000 {
-		cell-index = <0x29>;
-		compatible = "fsl,fman-v2-port-tx";
-		reg = <0xa9000 0x1000>;
-	};
-
-	fman1_tx_0x2a: port@aa000 {
-		cell-index = <0x2a>;
-		compatible = "fsl,fman-v2-port-tx";
-		reg = <0xaa000 0x1000>;
-	};
-
-	fman1_tx_0x2b: port@ab000 {
-		cell-index = <0x2b>;
-		compatible = "fsl,fman-v2-port-tx";
-		reg = <0xab000 0x1000>;
-	};
-
-	fman1_tx_0x2c: port@ac0000 {
-		cell-index = <0x2c>;
-		compatible = "fsl,fman-v2-port-tx";
-		reg = <0xac000 0x1000>;
-	};
-
-	fman1_tx_0x30: port@b0000 {
-		cell-index = <0x30>;
-		compatible = "fsl,fman-v2-port-tx";
-		reg = <0xb0000 0x1000>;
-	};
-
-	ethernet@e0000 {
-		compatible = "fsl,fman-dtsec";
-		cell-index = <0>;
-		reg = <0xe0000 0x1000>;
-		fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
-		tbi-handle = <&tbi5>;
-	};
-
-	ethernet@e2000 {
-		compatible = "fsl,fman-dtsec";
-		cell-index = <1>;
-		reg = <0xe2000 0x1000>;
-		fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
-		tbi-handle = <&tbi6>;
-	};
-
-	ethernet@e4000 {
-		compatible = "fsl,fman-dtsec";
-		cell-index = <2>;
-		reg = <0xe4000 0x1000>;
-		fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
-		tbi-handle = <&tbi7>;
-	};
-
-	ethernet@e6000 {
-		compatible = "fsl,fman-dtsec";
-		cell-index = <3>;
-		reg = <0xe6000 0x1000>;
-		fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
-		tbi-handle = <&tbi8>;
-	};
-
-	ethernet@e8000 {
-		compatible = "fsl,fman-dtsec";
-		cell-index = <4>;
-		reg = <0xf0000 0x1000>;
-		fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
-		tbi-handle = <&tbi9>;
-
-	ethernet@f0000 {
-		cell-index = <8>;
-		compatible = "fsl,fman-xgec";
-		reg = <0xf0000 0x1000>;
-		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
-	};
-
-	ptp-timer@fe000 {
-		compatible = "fsl,fman-ptp-timer";
-		reg = <0xfe000 0x1000>;
-	};
-
-	mdio@f1000 {
-		compatible = "fsl,fman-xmdio";
-		reg = <0xf1000 0x1000>;
-		interrupts = <101 2 0 0>;
-	};
-};
diff --git a/dts/upstream/Bindings/net/fsl-tsec-phy.txt b/dts/upstream/Bindings/net/fsl-tsec-phy.txt
index 047bdf7bdd2..9c9668c1b6a 100644
--- a/dts/upstream/Bindings/net/fsl-tsec-phy.txt
+++ b/dts/upstream/Bindings/net/fsl-tsec-phy.txt
@@ -86,4 +86,4 @@ Example:
 
 * Gianfar PTP clock nodes
 
-Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
+Refer to Documentation/devicetree/bindings/ptp/fsl,ptp.yaml
diff --git a/dts/upstream/Bindings/net/hisilicon-hip04-net.txt b/dts/upstream/Bindings/net/hisilicon-hip04-net.txt
index 464c0dafc61..c09eec6422a 100644
--- a/dts/upstream/Bindings/net/hisilicon-hip04-net.txt
+++ b/dts/upstream/Bindings/net/hisilicon-hip04-net.txt
@@ -19,16 +19,6 @@ Optional properties:
 [1] Documentation/devicetree/bindings/net/ethernet.txt
 
 
-* Ethernet ppe node:
-Control rx & tx fifos of all ethernet controllers.
-Have 2048 recv channels shared by all ethernet controllers, only if no overlap.
-Each controller's recv channel start from channel * number (RX_DESC_NUM).
-
-Required properties:
-- compatible: "hisilicon,hip04-ppe", "syscon".
-- reg: address and length of the register set for the device.
-
-
 * MDIO bus node:
 
 Required properties:
diff --git a/dts/upstream/Bindings/net/mediatek,net.yaml b/dts/upstream/Bindings/net/mediatek,net.yaml
index 3202dc7967c..686b5c2fae4 100644
--- a/dts/upstream/Bindings/net/mediatek,net.yaml
+++ b/dts/upstream/Bindings/net/mediatek,net.yaml
@@ -68,6 +68,17 @@ properties:
       Phandle to the syscon node that handles the path from GMAC to
       PHY variants.
 
+  mediatek,pcie-mirror:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the mediatek pcie-mirror controller.
+
+  mediatek,pctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon node that handles the ports slew rate and
+      driver current.
+
   mediatek,sgmiisys:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
@@ -131,15 +142,12 @@ allOf:
 
         mediatek,infracfg: false
 
-        mediatek,pctl:
-          $ref: /schemas/types.yaml#/definitions/phandle
-          description:
-            Phandle to the syscon node that handles the ports slew rate and
-            driver current.
-
         mediatek,wed: false
 
         mediatek,wed-pcie: false
+    else:
+      properties:
+        mediatek,pctl: false
 
   - if:
       properties:
@@ -201,12 +209,10 @@ allOf:
           minItems: 1
           maxItems: 1
 
-        mediatek,pcie-mirror:
-          $ref: /schemas/types.yaml#/definitions/phandle
-          description:
-            Phandle to the mediatek pcie-mirror controller.
-
         mediatek,wed-pcie: false
+    else:
+      properties:
+        mediatek,pcie-mirror: false
 
   - if:
       properties:
diff --git a/dts/upstream/Bindings/net/mediatek-bluetooth.txt b/dts/upstream/Bindings/net/mediatek-bluetooth.txt
index 9ef5bacda8c..988c72685cb 100644
--- a/dts/upstream/Bindings/net/mediatek-bluetooth.txt
+++ b/dts/upstream/Bindings/net/mediatek-bluetooth.txt
@@ -1,39 +1,3 @@
-MediaTek SoC built-in Bluetooth Devices
-==================================
-
-This device is a serial attached device to BTIF device and thus it must be a
-child node of the serial node with BTIF. The dt-bindings details for BTIF
-device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
-
-Required properties:
-
-- compatible:	Must be
-		  "mediatek,mt7622-bluetooth": for MT7622 SoC
-- clocks:	Should be the clock specifiers corresponding to the entry in
-		clock-names property.
-- clock-names:	Should contain "ref" entries.
-- power-domains: Phandle to the power domain that the device is part of
-
-Example:
-
-	btif: serial@1100c000 {
-		compatible = "mediatek,mt7622-btif",
-			     "mediatek,mtk-btif";
-		reg = <0 0x1100c000 0 0x1000>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_BTIF_PD>;
-		clock-names = "main";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-
-		bluetooth {
-			compatible = "mediatek,mt7622-bluetooth";
-			power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
-			clocks = <&clk25m>;
-			clock-names = "ref";
-		};
-	};
-
 MediaTek UART based Bluetooth Devices
 ==================================
 
diff --git a/dts/upstream/Bindings/net/mscc,miim.yaml b/dts/upstream/Bindings/net/mscc,miim.yaml
index 5b292e7c9e4..792f26b06b0 100644
--- a/dts/upstream/Bindings/net/mscc,miim.yaml
+++ b/dts/upstream/Bindings/net/mscc,miim.yaml
@@ -38,6 +38,16 @@ properties:
 
   clock-frequency: true
 
+  resets:
+    items:
+      - description:
+          Reset shared with all blocks attached to the Switch Core Register
+          Bus (CSR) including VRAP slave.
+
+  reset-names:
+    items:
+      - const: switch
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/net/nxp,tja11xx.yaml b/dts/upstream/Bindings/net/nxp,tja11xx.yaml
index 85bfa45f512..a754a61adc2 100644
--- a/dts/upstream/Bindings/net/nxp,tja11xx.yaml
+++ b/dts/upstream/Bindings/net/nxp,tja11xx.yaml
@@ -14,8 +14,53 @@ maintainers:
 description:
   Bindings for NXP TJA11xx automotive PHYs
 
+properties:
+  compatible:
+    enum:
+      - ethernet-phy-id0180.dc40
+      - ethernet-phy-id0180.dc41
+      - ethernet-phy-id0180.dc48
+      - ethernet-phy-id0180.dd00
+      - ethernet-phy-id0180.dd01
+      - ethernet-phy-id0180.dd02
+      - ethernet-phy-id0180.dc80
+      - ethernet-phy-id0180.dc82
+      - ethernet-phy-id001b.b010
+      - ethernet-phy-id001b.b013
+      - ethernet-phy-id001b.b030
+      - ethernet-phy-id001b.b031
+
 allOf:
   - $ref: ethernet-phy.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ethernet-phy-id0180.dc40
+              - ethernet-phy-id0180.dc41
+              - ethernet-phy-id0180.dc48
+              - ethernet-phy-id0180.dd00
+              - ethernet-phy-id0180.dd01
+              - ethernet-phy-id0180.dd02
+
+    then:
+      properties:
+        nxp,rmii-refclk-in:
+          type: boolean
+          description: |
+            The REF_CLK is provided for both transmitted and received data
+            in RMII mode. This clock signal is provided by the PHY and is
+            typically derived from an external 25MHz crystal. Alternatively,
+            a 50MHz clock signal generated by an external oscillator can be
+            connected to pin REF_CLK. A third option is to connect a 25MHz
+            clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
+            as input or output according to the actual circuit connection.
+            If present, indicates that the REF_CLK will be configured as
+            interface reference clock input when RMII mode enabled.
+            If not present, the REF_CLK will be configured as interface
+            reference clock output when RMII mode enabled.
+            Only supported on TJA1100 and TJA1101.
 
 patternProperties:
   "^ethernet-phy@[0-9a-f]+$":
@@ -32,22 +77,6 @@ patternProperties:
         description:
           The ID number for the child PHY. Should be +1 of parent PHY.
 
-      nxp,rmii-refclk-in:
-        type: boolean
-        description: |
-          The REF_CLK is provided for both transmitted and received data
-          in RMII mode. This clock signal is provided by the PHY and is
-          typically derived from an external 25MHz crystal. Alternatively,
-          a 50MHz clock signal generated by an external oscillator can be
-          connected to pin REF_CLK. A third option is to connect a 25MHz
-          clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
-          as input or output according to the actual circuit connection.
-          If present, indicates that the REF_CLK will be configured as
-          interface reference clock input when RMII mode enabled.
-          If not present, the REF_CLK will be configured as interface
-          reference clock output when RMII mode enabled.
-          Only supported on TJA1100 and TJA1101.
-
     required:
       - reg
 
@@ -60,6 +89,7 @@ examples:
         #size-cells = <0>;
 
         tja1101_phy0: ethernet-phy@4 {
+            compatible = "ethernet-phy-id0180.dc40";
             reg = <0x4>;
             nxp,rmii-refclk-in;
         };
diff --git a/dts/upstream/Bindings/net/pcs/snps,dw-xpcs.yaml b/dts/upstream/Bindings/net/pcs/snps,dw-xpcs.yaml
new file mode 100644
index 00000000000..e77eec9ac9e
--- /dev/null
+++ b/dts/upstream/Bindings/net/pcs/snps,dw-xpcs.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/snps,dw-xpcs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Ethernet PCS
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  Synopsys DesignWare Ethernet Physical Coding Sublayer provides an interface
+  between Media Access Control and Physical Medium Attachment Sublayer through
+  the Media Independent Interface (XGMII, USXGMII, XLGMII, GMII, etc)
+  controlled by means of the IEEE std. Clause 45 registers set. The PCS can be
+  optionally synthesized with a vendor-specific interface connected to
+  Synopsys PMA (also called DesignWare Consumer/Enterprise PHY) although in
+  general it can be used to communicate with any compatible PHY.
+
+  The PCS CSRs can be accessible either over the Ethernet MDIO bus or directly
+  by means of the APB3/MCI interfaces. In the later case the XPCS can be mapped
+  right to the system IO memory space.
+
+properties:
+  compatible:
+    oneOf:
+      - description: Synopsys DesignWare XPCS with none or unknown PMA
+        const: snps,dw-xpcs
+      - description: Synopsys DesignWare XPCS with Consumer Gen1 3G PMA
+        const: snps,dw-xpcs-gen1-3g
+      - description: Synopsys DesignWare XPCS with Consumer Gen2 3G PMA
+        const: snps,dw-xpcs-gen2-3g
+      - description: Synopsys DesignWare XPCS with Consumer Gen2 6G PMA
+        const: snps,dw-xpcs-gen2-6g
+      - description: Synopsys DesignWare XPCS with Consumer Gen4 3G PMA
+        const: snps,dw-xpcs-gen4-3g
+      - description: Synopsys DesignWare XPCS with Consumer Gen4 6G PMA
+        const: snps,dw-xpcs-gen4-6g
+      - description: Synopsys DesignWare XPCS with Consumer Gen5 10G PMA
+        const: snps,dw-xpcs-gen5-10g
+      - description: Synopsys DesignWare XPCS with Consumer Gen5 12G PMA
+        const: snps,dw-xpcs-gen5-12g
+
+  reg:
+    items:
+      - description:
+          In case of the MDIO management interface this just a 5-bits ID
+          of the MDIO bus device. If DW XPCS CSRs space is accessed over the
+          MCI or APB3 management interfaces, then the space mapping can be
+          either 'direct' or 'indirect'. In the former case all Clause 45
+          registers are contiguously mapped within the address space
+          MMD '[20:16]', Reg '[15:0]'. In the later case the space is divided
+          to the multiple 256 register sets. There is a special viewport CSR
+          which is responsible for the set selection. The upper part of
+          the CSR address MMD+REG[20:8] is supposed to be written in there
+          so the corresponding subset would be mapped to the lowest 255 CSRs.
+
+  reg-names:
+    items:
+      - enum: [ direct, indirect ]
+
+  reg-io-width:
+    description:
+      The way the CSRs are mapped to the memory is platform depended. Since
+      each Clause 45 CSR is of 16-bits wide the access instructions must be
+      two bytes aligned at least.
+    default: 2
+    enum: [ 2, 4 ]
+
+  interrupts:
+    description:
+      System interface interrupt output (sbd_intr_o) indicating Clause 73/37
+      auto-negotiation events':' Page received, AN is completed or incompatible
+      link partner.
+    maxItems: 1
+
+  clocks:
+    description:
+      The MCI and APB3 interfaces are supposed to be equipped with a clock
+      source connected to the clk_csr_i line.
+
+      PCS/PMA layer can be clocked by an internal reference clock source
+      (phyN_core_refclk) or by an externally connected (phyN_pad_refclk) clock
+      generator. Both clocks can be supplied at a time.
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - minItems: 1
+        items: # MDIO
+          - enum: [core, pad]
+          - const: pad
+      - minItems: 1
+        items: # MCI or APB
+          - const: csr
+          - enum: [core, pad]
+          - const: pad
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ethernet-pcs@1f05d000 {
+      compatible = "snps,dw-xpcs";
+      reg = <0x1f05d000 0x1000>;
+      reg-names = "indirect";
+
+      reg-io-width = <4>;
+
+      interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&ccu_pclk>, <&ccu_core>, <&ccu_pad>;
+      clock-names = "csr", "core", "pad";
+    };
+  - |
+    mdio-bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ethernet-pcs@0 {
+        compatible = "snps,dw-xpcs";
+        reg = <0>;
+
+        clocks = <&ccu_core>, <&ccu_pad>;
+        clock-names = "core", "pad";
+      };
+    };
+...
diff --git a/dts/upstream/Bindings/net/realtek,rtl82xx.yaml b/dts/upstream/Bindings/net/realtek,rtl82xx.yaml
index bb94a238852..d248a08a213 100644
--- a/dts/upstream/Bindings/net/realtek,rtl82xx.yaml
+++ b/dts/upstream/Bindings/net/realtek,rtl82xx.yaml
@@ -14,10 +14,32 @@ maintainers:
 description:
   Bindings for Realtek RTL82xx PHYs
 
-allOf:
-  - $ref: ethernet-phy.yaml#
-
 properties:
+  compatible:
+    enum:
+      - ethernet-phy-id001c.c800
+      - ethernet-phy-id001c.c816
+      - ethernet-phy-id001c.c838
+      - ethernet-phy-id001c.c840
+      - ethernet-phy-id001c.c848
+      - ethernet-phy-id001c.c849
+      - ethernet-phy-id001c.c84a
+      - ethernet-phy-id001c.c862
+      - ethernet-phy-id001c.c878
+      - ethernet-phy-id001c.c880
+      - ethernet-phy-id001c.c910
+      - ethernet-phy-id001c.c912
+      - ethernet-phy-id001c.c913
+      - ethernet-phy-id001c.c914
+      - ethernet-phy-id001c.c915
+      - ethernet-phy-id001c.c916
+      - ethernet-phy-id001c.c942
+      - ethernet-phy-id001c.c961
+      - ethernet-phy-id001c.cad0
+      - ethernet-phy-id001c.cb00
+
+  leds: true
+
   realtek,clkout-disable:
     type: boolean
     description:
@@ -31,6 +53,18 @@ properties:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: ethernet-phy.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: ethernet-phy-id001c.c916
+    then:
+      properties:
+        leds: false
+
 examples:
   - |
     mdio {
diff --git a/dts/upstream/Bindings/net/snps,dwmac.yaml b/dts/upstream/Bindings/net/snps,dwmac.yaml
index 21cc27e75f5..3eb65e63fda 100644
--- a/dts/upstream/Bindings/net/snps,dwmac.yaml
+++ b/dts/upstream/Bindings/net/snps,dwmac.yaml
@@ -76,6 +76,7 @@ properties:
         - rockchip,rk3128-gmac
         - rockchip,rk3228-gmac
         - rockchip,rk3288-gmac
+        - rockchip,rk3308-gmac
         - rockchip,rk3328-gmac
         - rockchip,rk3366-gmac
         - rockchip,rk3368-gmac
@@ -435,6 +436,32 @@ properties:
     description:
       Use Address-Aligned Beats
 
+  snps,pbl:
+    description:
+      Programmable Burst Length (tx and rx)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32]
+
+  snps,txpbl:
+    description:
+      Tx Programmable Burst Length. If set, DMA tx will use this
+      value rather than snps,pbl.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32]
+
+  snps,rxpbl:
+    description:
+      Rx Programmable Burst Length. If set, DMA rx will use this
+      value rather than snps,pbl.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32]
+
+  snps,no-pbl-x8:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core
+      rev < 3.50, don\'t multiply the values by 4.
+
   snps,fixed-burst:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -485,6 +512,12 @@ properties:
     description:
       Frequency division factor for MDC clock.
 
+  snps,tso:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enables the TSO feature otherwise it will be managed by MAC HW capability
+      register.
+
   mdio:
     $ref: mdio.yaml#
     unevaluatedProperties: false
@@ -568,95 +601,38 @@ allOf:
   - if:
       properties:
         compatible:
-          contains:
-            enum:
-              - allwinner,sun7i-a20-gmac
-              - allwinner,sun8i-a83t-emac
-              - allwinner,sun8i-h3-emac
-              - allwinner,sun8i-r40-gmac
-              - allwinner,sun8i-v3s-emac
-              - allwinner,sun50i-a64-emac
-              - ingenic,jz4775-mac
-              - ingenic,x1000-mac
-              - ingenic,x1600-mac
-              - ingenic,x1830-mac
-              - ingenic,x2000-mac
-              - qcom,sa8775p-ethqos
-              - qcom,sc8280xp-ethqos
-              - snps,dwmac-3.50a
-              - snps,dwmac-4.10a
-              - snps,dwmac-4.20a
-              - snps,dwmac-5.20
-              - snps,dwxgmac
-              - snps,dwxgmac-2.10
-              - st,spear600-gmac
-
-    then:
-      properties:
-        snps,pbl:
-          description:
-            Programmable Burst Length (tx and rx)
-          $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [1, 2, 4, 8, 16, 32]
-
-        snps,txpbl:
-          description:
-            Tx Programmable Burst Length. If set, DMA tx will use this
-            value rather than snps,pbl.
-          $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [1, 2, 4, 8, 16, 32]
-
-        snps,rxpbl:
-          description:
-            Rx Programmable Burst Length. If set, DMA rx will use this
-            value rather than snps,pbl.
-          $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [1, 2, 4, 8, 16, 32]
-
-        snps,no-pbl-x8:
-          $ref: /schemas/types.yaml#/definitions/flag
-          description:
-            Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core
-            rev < 3.50, don\'t multiply the values by 4.
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - allwinner,sun7i-a20-gmac
-              - allwinner,sun8i-a83t-emac
-              - allwinner,sun8i-h3-emac
-              - allwinner,sun8i-r40-gmac
-              - allwinner,sun8i-v3s-emac
-              - allwinner,sun50i-a64-emac
-              - loongson,ls2k-dwmac
-              - loongson,ls7a-dwmac
-              - ingenic,jz4775-mac
-              - ingenic,x1000-mac
-              - ingenic,x1600-mac
-              - ingenic,x1830-mac
-              - ingenic,x2000-mac
-              - qcom,qcs404-ethqos
-              - qcom,sa8775p-ethqos
-              - qcom,sc8280xp-ethqos
-              - qcom,sm8150-ethqos
-              - snps,dwmac-4.00
-              - snps,dwmac-4.10a
-              - snps,dwmac-4.20a
-              - snps,dwmac-5.10a
-              - snps,dwmac-5.20
-              - snps,dwxgmac
-              - snps,dwxgmac-2.10
-              - st,spear600-gmac
+          not:
+            contains:
+              enum:
+                - allwinner,sun7i-a20-gmac
+                - allwinner,sun8i-a83t-emac
+                - allwinner,sun8i-h3-emac
+                - allwinner,sun8i-r40-gmac
+                - allwinner,sun8i-v3s-emac
+                - allwinner,sun50i-a64-emac
+                - loongson,ls2k-dwmac
+                - loongson,ls7a-dwmac
+                - ingenic,jz4775-mac
+                - ingenic,x1000-mac
+                - ingenic,x1600-mac
+                - ingenic,x1830-mac
+                - ingenic,x2000-mac
+                - qcom,qcs404-ethqos
+                - qcom,sa8775p-ethqos
+                - qcom,sc8280xp-ethqos
+                - qcom,sm8150-ethqos
+                - snps,dwmac-4.00
+                - snps,dwmac-4.10a
+                - snps,dwmac-4.20a
+                - snps,dwmac-5.10a
+                - snps,dwmac-5.20
+                - snps,dwxgmac
+                - snps,dwxgmac-2.10
+                - st,spear600-gmac
 
     then:
       properties:
-        snps,tso:
-          $ref: /schemas/types.yaml#/definitions/flag
-          description:
-            Enables the TSO feature otherwise it will be managed by
-            MAC HW capability register.
+        snps,tso: false
 
 additionalProperties: true
 
diff --git a/dts/upstream/Bindings/net/stm32-dwmac.yaml b/dts/upstream/Bindings/net/stm32-dwmac.yaml
index 7ccf75676b6..bf23838fe6e 100644
--- a/dts/upstream/Bindings/net/stm32-dwmac.yaml
+++ b/dts/upstream/Bindings/net/stm32-dwmac.yaml
@@ -22,18 +22,22 @@ select:
         enum:
           - st,stm32-dwmac
           - st,stm32mp1-dwmac
+          - st,stm32mp13-dwmac
+          - st,stm32mp25-dwmac
   required:
     - compatible
 
-allOf:
-  - $ref: snps,dwmac.yaml#
-
 properties:
   compatible:
     oneOf:
       - items:
           - enum:
+              - st,stm32mp25-dwmac
+          - const: snps,dwmac-5.20
+      - items:
+          - enum:
               - st,stm32mp1-dwmac
+              - st,stm32mp13-dwmac
           - const: snps,dwmac-4.20a
       - items:
           - enum:
@@ -75,12 +79,15 @@ properties:
   st,syscon:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      - items:
+      - minItems: 2
+        items:
           - description: phandle to the syscon node which encompases the glue register
           - description: offset of the control register
+          - description: field to set mask in register
     description:
       Should be phandle/offset pair. The phandle to the syscon node which
-      encompases the glue register, and the offset of the control register
+      encompases the glue register, the offset of the control register and
+      the mask to set bitfield in control register
 
   st,ext-phyclk:
     description:
@@ -112,12 +119,40 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: snps,dwmac.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32-dwmac
+              - st,stm32mp1-dwmac
+              - st,stm32mp25-dwmac
+    then:
+      properties:
+        st,syscon:
+          items:
+            minItems: 2
+            maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp13-dwmac
+    then:
+      properties:
+        st,syscon:
+          items:
+            minItems: 3
+            maxItems: 3
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
-    #include <dt-bindings/reset/stm32mp1-resets.h>
-    #include <dt-bindings/mfd/stm32h7-rcc.h>
     //Example 1
      ethernet0: ethernet@5800a000 {
            compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
diff --git a/dts/upstream/Bindings/net/ti,icss-iep.yaml b/dts/upstream/Bindings/net/ti,icss-iep.yaml
index f5c22d6dcae..e36e3a62290 100644
--- a/dts/upstream/Bindings/net/ti,icss-iep.yaml
+++ b/dts/upstream/Bindings/net/ti,icss-iep.yaml
@@ -28,6 +28,15 @@ properties:
     maxItems: 1
     description: phandle to the IEP source clock
 
+  interrupts:
+    maxItems: 1
+    description:
+      Interrupt specifier for capture/compare IRQ.
+
+  interrupt-names:
+    items:
+      - const: iep_cap_cmp
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/net/ti,icssg-prueth.yaml b/dts/upstream/Bindings/net/ti,icssg-prueth.yaml
index e253fa78609..c296e571184 100644
--- a/dts/upstream/Bindings/net/ti,icssg-prueth.yaml
+++ b/dts/upstream/Bindings/net/ti,icssg-prueth.yaml
@@ -55,6 +55,14 @@ properties:
     description:
       phandle to MII_RT module's syscon regmap
 
+  ti,pa-stats:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to PA_STATS module's syscon regmap. PA_STATS is a set of
+      registers where different statistics related to ICSSG, are dumped by
+      ICSSG firmware. PA_STATS module's syscon regmap will help the device to
+      access/read/write those statistics.
+
   ti,iep:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     maxItems: 2
@@ -194,6 +202,7 @@ examples:
                     "tx1-0", "tx1-1", "tx1-2", "tx1-3",
                     "rx0", "rx1";
         ti,mii-g-rt = <&icssg2_mii_g_rt>;
+        ti,pa-stats = <&icssg2_pa_stats>;
         ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
         interrupt-parent = <&icssg2_intc>;
         interrupts = <24 0 2>, <25 1 3>;
diff --git a/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml b/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml
index 5c4498b762c..070c4c9b864 100644
--- a/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml
+++ b/dts/upstream/Bindings/net/wireless/qcom,ath10k.yaml
@@ -128,6 +128,11 @@ properties:
       Whether to skip executing an SCM call that reassigns the memory
       region ownership.
 
+  qcom,no-msa-ready-indicator:
+    type: boolean
+    description:
+      Don't wait for MSA_READY indicator to complete init.
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: State bits used by the AP to signal the WLAN Q6.
diff --git a/dts/upstream/Bindings/net/wireless/qcom,ath11k-pci.yaml b/dts/upstream/Bindings/net/wireless/qcom,ath11k-pci.yaml
index 41d023797d7..8675d7d0215 100644
--- a/dts/upstream/Bindings/net/wireless/qcom,ath11k-pci.yaml
+++ b/dts/upstream/Bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -17,6 +17,7 @@ description: |
 properties:
   compatible:
     enum:
+      - pci17cb,1101  # QCA6390
       - pci17cb,1103  # WCN6855
 
   reg:
@@ -28,10 +29,55 @@ properties:
       string to uniquely identify variant of the calibration data for designs
       with colliding bus and device ids
 
+  vddrfacmn-supply:
+    description: VDD_RFA_CMN supply regulator handle
+
+  vddaon-supply:
+    description: VDD_AON supply regulator handle
+
+  vddwlcx-supply:
+    description: VDD_WL_CX supply regulator handle
+
+  vddwlmx-supply:
+    description: VDD_WL_MX supply regulator handle
+
+  vddrfa0p8-supply:
+    description: VDD_RFA_0P8 supply regulator handle
+
+  vddrfa1p2-supply:
+    description: VDD_RFA_1P2 supply regulator handle
+
+  vddrfa1p7-supply:
+    description: VDD_RFA_1P7 supply regulator handle
+
+  vddpcie0p9-supply:
+    description: VDD_PCIE_0P9 supply regulator handle
+
+  vddpcie1p8-supply:
+    description: VDD_PCIE_1P8 supply regulator handle
+
 required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: pci17cb,1101
+    then:
+      required:
+        - vddrfacmn-supply
+        - vddaon-supply
+        - vddwlcx-supply
+        - vddwlmx-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p7-supply
+        - vddpcie0p9-supply
+        - vddpcie1p8-supply
+
 additionalProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml b/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml
index a2d55bf4c7a..ff5763dc66a 100644
--- a/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml
+++ b/dts/upstream/Bindings/net/wireless/qcom,ath11k.yaml
@@ -265,15 +265,6 @@ allOf:
 
 examples:
   - |
-
-    q6v5_wcss: remoteproc@cd00000 {
-        compatible = "qcom,ipq8074-wcss-pil";
-        reg = <0xcd00000 0x4040>,
-              <0x4ab000 0x20>;
-        reg-names = "qdsp6",
-                    "rmb";
-    };
-
     wifi0: wifi@c000000 {
         compatible = "qcom,ipq8074-wifi";
         reg = <0xc000000 0x2000000>;
diff --git a/dts/upstream/Bindings/net/wireless/qcom,ath12k.yaml b/dts/upstream/Bindings/net/wireless/qcom,ath12k.yaml
new file mode 100644
index 00000000000..1b5884015b1
--- /dev/null
+++ b/dts/upstream/Bindings/net/wireless/qcom,ath12k.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2024 Linaro Limited
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath12k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath12k wireless devices (PCIe)
+
+maintainers:
+  - Jeff Johnson <quic_jjohnson@quicinc.com>
+  - Kalle Valo <kvalo@kernel.org>
+
+description:
+  Qualcomm Technologies IEEE 802.11be PCIe devices.
+
+properties:
+  compatible:
+    enum:
+      - pci17cb,1107  # WCN7850
+
+  reg:
+    maxItems: 1
+
+  vddaon-supply:
+    description: VDD_AON supply regulator handle
+
+  vddwlcx-supply:
+    description: VDD_WLCX supply regulator handle
+
+  vddwlmx-supply:
+    description: VDD_WLMX supply regulator handle
+
+  vddrfacmn-supply:
+    description: VDD_RFA_CMN supply regulator handle
+
+  vddrfa0p8-supply:
+    description: VDD_RFA_0P8 supply regulator handle
+
+  vddrfa1p2-supply:
+    description: VDD_RFA_1P2 supply regulator handle
+
+  vddrfa1p8-supply:
+    description: VDD_RFA_1P8 supply regulator handle
+
+  vddpcie0p9-supply:
+    description: VDD_PCIE_0P9 supply regulator handle
+
+  vddpcie1p8-supply:
+    description: VDD_PCIE_1P8 supply regulator handle
+
+required:
+  - compatible
+  - reg
+  - vddaon-supply
+  - vddwlcx-supply
+  - vddwlmx-supply
+  - vddrfacmn-supply
+  - vddrfa0p8-supply
+  - vddrfa1p2-supply
+  - vddrfa1p8-supply
+  - vddpcie0p9-supply
+  - vddpcie1p8-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pcie {
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        pcie@0 {
+            device_type = "pci";
+            reg = <0x0 0x0 0x0 0x0 0x0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+
+            bus-range = <0x01 0xff>;
+
+            wifi@0 {
+                compatible = "pci17cb,1107";
+                reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+                vddaon-supply = <&vreg_pmu_aon_0p59>;
+                vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+                vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+                vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+                vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+                vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+                vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+                vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+                vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/net/xlnx,gmii-to-rgmii.yaml b/dts/upstream/Bindings/net/xlnx,gmii-to-rgmii.yaml
index 0f781dac671..eb803ddd13e 100644
--- a/dts/upstream/Bindings/net/xlnx,gmii-to-rgmii.yaml
+++ b/dts/upstream/Bindings/net/xlnx,gmii-to-rgmii.yaml
@@ -31,6 +31,10 @@ properties:
   phy-handle:
     $ref: ethernet-controller.yaml#/properties/phy-handle
 
+  clocks:
+    items:
+      - description: 200/375 MHz free-running clock is used as input clock.
+
 required:
   - compatible
   - reg
@@ -51,5 +55,6 @@ examples:
             compatible = "xlnx,gmii-to-rgmii-1.0";
             reg = <8>;
             phy-handle = <&phy>;
+            clocks = <&dummy>;
         };
     };
diff --git a/dts/upstream/Bindings/nvmem/amlogic,meson-gxbb-efuse.yaml b/dts/upstream/Bindings/nvmem/amlogic,meson-gxbb-efuse.yaml
index 9801fe6f91b..99ddc9a4af0 100644
--- a/dts/upstream/Bindings/nvmem/amlogic,meson-gxbb-efuse.yaml
+++ b/dts/upstream/Bindings/nvmem/amlogic,meson-gxbb-efuse.yaml
@@ -28,6 +28,9 @@ properties:
     description: phandle to the secure-monitor node
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - clocks
diff --git a/dts/upstream/Bindings/nvmem/imx-iim.yaml b/dts/upstream/Bindings/nvmem/imx-iim.yaml
index e9d9d8df481..bb37d72c9ea 100644
--- a/dts/upstream/Bindings/nvmem/imx-iim.yaml
+++ b/dts/upstream/Bindings/nvmem/imx-iim.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX IC Identification Module (IIM)
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 description: |
   This binding represents the IC Identification Module (IIM) found on
diff --git a/dts/upstream/Bindings/nvmem/imx-ocotp.yaml b/dts/upstream/Bindings/nvmem/imx-ocotp.yaml
index be1314454be..e21c06e9a74 100644
--- a/dts/upstream/Bindings/nvmem/imx-ocotp.yaml
+++ b/dts/upstream/Bindings/nvmem/imx-ocotp.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX On-Chip OTP Controller (OCOTP)
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 description: |
   This binding represents the on-chip eFuse OTP controller found on
diff --git a/dts/upstream/Bindings/nvmem/mediatek,efuse.yaml b/dts/upstream/Bindings/nvmem/mediatek,efuse.yaml
index cf5f9e22bb7..32b8c1eb4e8 100644
--- a/dts/upstream/Bindings/nvmem/mediatek,efuse.yaml
+++ b/dts/upstream/Bindings/nvmem/mediatek,efuse.yaml
@@ -28,7 +28,9 @@ properties:
           - enum:
               - mediatek,mt7622-efuse
               - mediatek,mt7623-efuse
+              - mediatek,mt7981-efuse
               - mediatek,mt7986-efuse
+              - mediatek,mt7988-efuse
               - mediatek,mt8173-efuse
               - mediatek,mt8183-efuse
               - mediatek,mt8186-efuse
diff --git a/dts/upstream/Bindings/nvmem/mxs-ocotp.yaml b/dts/upstream/Bindings/nvmem/mxs-ocotp.yaml
index d9287be8987..95121dd6311 100644
--- a/dts/upstream/Bindings/nvmem/mxs-ocotp.yaml
+++ b/dts/upstream/Bindings/nvmem/mxs-ocotp.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: On-Chip OTP Memory for Freescale i.MX23/i.MX28
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 allOf:
   - $ref: nvmem.yaml#
diff --git a/dts/upstream/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml b/dts/upstream/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml
index 917c40d5c38..1cbe44ab23b 100644
--- a/dts/upstream/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml
+++ b/dts/upstream/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml
@@ -28,7 +28,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    nvmem {
+    soc-nvmem {
         compatible = "xlnx,zynqmp-nvmem-fw";
         nvmem-layout {
             compatible = "fixed-layout";
diff --git a/dts/upstream/Bindings/pci/host-generic-pci.yaml b/dts/upstream/Bindings/pci/host-generic-pci.yaml
index 3484e0b4b41..bcfbaf5582c 100644
--- a/dts/upstream/Bindings/pci/host-generic-pci.yaml
+++ b/dts/upstream/Bindings/pci/host-generic-pci.yaml
@@ -110,6 +110,12 @@ properties:
   iommu-map-mask: true
   msi-parent: true
 
+  ats-supported:
+    description:
+      Indicates that a PCIe host controller supports ATS, and can handle Memory
+      Requests with Address Type (AT).
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/pci/mediatek,mt7621-pcie.yaml b/dts/upstream/Bindings/pci/mediatek,mt7621-pcie.yaml
index 6fba42156db..c41608863d6 100644
--- a/dts/upstream/Bindings/pci/mediatek,mt7621-pcie.yaml
+++ b/dts/upstream/Bindings/pci/mediatek,mt7621-pcie.yaml
@@ -13,6 +13,35 @@ description: |+
   MediaTek MT7621 PCIe subsys supports a single Root Complex (RC)
   with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
 
+                          MT7621 PCIe HOST Topology
+
+                                   .-------.
+                                   |       |
+                                   |  CPU  |
+                                   |       |
+                                   '-------'
+                                       |
+                                       |
+                                       |
+                                       v
+                              .------------------.
+                  .-----------|  HOST/PCI Bridge |------------.
+                  |           '------------------'            | Type1
+             BUS0 |                     |                     | Access
+                  v                     v                     v On Bus0
+          .-------------.        .-------------.       .-------------.
+          | VIRTUAL P2P |        | VIRTUAL P2P |       | VIRTUAL P2P |
+          |    BUS0     |        |    BUS0     |       |    BUS0     |
+          |    DEV0     |        |    DEV1     |       |    DEV2     |
+          '-------------'        '-------------'       '-------------'
+    Type0        |          Type0       |         Type0       |
+   Access   BUS1 |         Access   BUS2|        Access   BUS3|
+   On Bus1       v         On Bus2      v        On Bus3      v
+           .----------.           .----------.          .----------.
+           | Device 0 |           | Device 0 |          | Device 0 |
+           |  Func 0  |           |  Func 0  |          |  Func 0  |
+           '----------'           '----------'          '----------'
+
 allOf:
   - $ref: /schemas/pci/pci-host-bridge.yaml#
 
diff --git a/dts/upstream/Bindings/pci/microchip,pcie-host.yaml b/dts/upstream/Bindings/pci/microchip,pcie-host.yaml
index 5d7aec5f54e..612633ba59e 100644
--- a/dts/upstream/Bindings/pci/microchip,pcie-host.yaml
+++ b/dts/upstream/Bindings/pci/microchip,pcie-host.yaml
@@ -10,21 +10,13 @@ maintainers:
   - Daire McNamara <daire.mcnamara@microchip.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-host-bridge.yaml#
+  - $ref: plda,xpressrich3-axi-common.yaml#
   - $ref: /schemas/interrupt-controller/msi-controller.yaml#
 
 properties:
   compatible:
     const: microchip,pcie-host-1.0 # PolarFire
 
-  reg:
-    maxItems: 2
-
-  reg-names:
-    items:
-      - const: cfg
-      - const: apb
-
   clocks:
     description:
       Fabric Interface Controllers, FICs, are the interface between the FPGA
@@ -52,18 +44,6 @@ properties:
     items:
       pattern: '^fic[0-3]$'
 
-  interrupts:
-    minItems: 1
-    items:
-      - description: PCIe host controller
-      - description: builtin MSI controller
-
-  interrupt-names:
-    minItems: 1
-    items:
-      - const: pcie
-      - const: msi
-
   ranges:
     minItems: 1
     maxItems: 3
@@ -72,39 +52,6 @@ properties:
     minItems: 1
     maxItems: 6
 
-  msi-controller:
-    description: Identifies the node as an MSI controller.
-
-  msi-parent:
-    description: MSI controller the device is capable of using.
-
-  interrupt-controller:
-    type: object
-    properties:
-      '#address-cells':
-        const: 0
-
-      '#interrupt-cells':
-        const: 1
-
-      interrupt-controller: true
-
-    required:
-      - '#address-cells'
-      - '#interrupt-cells'
-      - interrupt-controller
-
-    additionalProperties: false
-
-required:
-  - reg
-  - reg-names
-  - "#interrupt-cells"
-  - interrupts
-  - interrupt-map-mask
-  - interrupt-map
-  - msi-controller
-
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/pci/plda,xpressrich3-axi-common.yaml b/dts/upstream/Bindings/pci/plda,xpressrich3-axi-common.yaml
new file mode 100644
index 00000000000..7a57a80052a
--- /dev/null
+++ b/dts/upstream/Bindings/pci/plda,xpressrich3-axi-common.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/plda,xpressrich3-axi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PLDA XpressRICH PCIe host common properties
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+  - Kevin Xie <kevin.xie@starfivetech.com>
+
+description:
+  Generic PLDA XpressRICH PCIe host common properties.
+
+allOf:
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
+
+properties:
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: apb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: pcie
+      - const: msi
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  interrupt-controller:
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - msi-controller
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+
+additionalProperties: true
+
+...
diff --git a/dts/upstream/Bindings/pci/qcom,pcie-ep.yaml b/dts/upstream/Bindings/pci/qcom,pcie-ep.yaml
index a223ce029ca..46802f7d948 100644
--- a/dts/upstream/Bindings/pci/qcom,pcie-ep.yaml
+++ b/dts/upstream/Bindings/pci/qcom,pcie-ep.yaml
@@ -13,6 +13,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - qcom,sa8775p-pcie-ep
           - qcom,sdx55-pcie-ep
           - qcom,sm8450-pcie-ep
       - items:
@@ -20,6 +21,7 @@ properties:
           - const: qcom,sdx55-pcie-ep
 
   reg:
+    minItems: 6
     items:
       - description: Qualcomm-specific PARF configuration registers
       - description: DesignWare PCIe registers
@@ -27,8 +29,10 @@ properties:
       - description: Address Translation Unit (ATU) registers
       - description: Memory region used to map remote RC address space
       - description: BAR memory region
+      - description: DMA register space
 
   reg-names:
+    minItems: 6
     items:
       - const: parf
       - const: dbi
@@ -36,13 +40,14 @@ properties:
       - const: atu
       - const: addr_space
       - const: mmio
+      - const: dma
 
   clocks:
-    minItems: 7
+    minItems: 5
     maxItems: 8
 
   clock-names:
-    minItems: 7
+    minItems: 5
     maxItems: 8
 
   qcom,perst-regs:
@@ -57,14 +62,18 @@ properties:
           - description: Perst separation enable offset
 
   interrupts:
+    minItems: 2
     items:
       - description: PCIe Global interrupt
       - description: PCIe Doorbell interrupt
+      - description: DMA interrupt
 
   interrupt-names:
+    minItems: 2
     items:
       - const: global
       - const: doorbell
+      - const: dma
 
   reset-gpios:
     description: GPIO used as PERST# input signal
@@ -125,6 +134,10 @@ allOf:
               - qcom,sdx55-pcie-ep
     then:
       properties:
+        reg:
+          maxItems: 6
+        reg-names:
+          maxItems: 6
         clocks:
           items:
             - description: PCIe Auxiliary clock
@@ -143,6 +156,10 @@ allOf:
             - const: slave_q2a
             - const: sleep
             - const: ref
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          maxItems: 2
 
   - if:
       properties:
@@ -152,6 +169,10 @@ allOf:
               - qcom,sm8450-pcie-ep
     then:
       properties:
+        reg:
+          maxItems: 6
+        reg-names:
+          maxItems: 6
         clocks:
           items:
             - description: PCIe Auxiliary clock
@@ -172,6 +193,45 @@ allOf:
             - const: ref
             - const: ddrss_sf_tbu
             - const: aggre_noc_axi
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-pcie-ep
+    then:
+      properties:
+        reg:
+          minItems: 7
+          maxItems: 7
+        reg-names:
+          minItems: 7
+          maxItems: 7
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+        interrupts:
+          minItems: 3
+          maxItems: 3
+        interrupt-names:
+          minItems: 3
+          maxItems: 3
 
 unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/pci/qcom,pcie-sm8450.yaml b/dts/upstream/Bindings/pci/qcom,pcie-sm8450.yaml
index 1496d6993ab..d8c0afaa4b1 100644
--- a/dts/upstream/Bindings/pci/qcom,pcie-sm8450.yaml
+++ b/dts/upstream/Bindings/pci/qcom,pcie-sm8450.yaml
@@ -69,6 +69,10 @@ properties:
       - const: msi6
       - const: msi7
 
+  operating-points-v2: true
+  opp-table:
+    type: object
+
   resets:
     maxItems: 1
 
diff --git a/dts/upstream/Bindings/pci/qcom,pcie-x1e80100.yaml b/dts/upstream/Bindings/pci/qcom,pcie-x1e80100.yaml
index 1074310a8e7..a9db0a23156 100644
--- a/dts/upstream/Bindings/pci/qcom,pcie-x1e80100.yaml
+++ b/dts/upstream/Bindings/pci/qcom,pcie-x1e80100.yaml
@@ -19,11 +19,10 @@ properties:
     const: qcom,pcie-x1e80100
 
   reg:
-    minItems: 5
+    minItems: 6
     maxItems: 6
 
   reg-names:
-    minItems: 5
     items:
       - const: parf # Qualcomm specific registers
       - const: dbi # DesignWare PCIe registers
diff --git a/dts/upstream/Bindings/pci/rockchip-dw-pcie-common.yaml b/dts/upstream/Bindings/pci/rockchip-dw-pcie-common.yaml
new file mode 100644
index 00000000000..cc9adfc7611
--- /dev/null
+++ b/dts/upstream/Bindings/pci/rockchip-dw-pcie-common.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe RC/EP controller on Rockchip SoCs
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+  - Simon Xue <xxm@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+  Generic properties for the DesignWare based PCIe RC/EP controller on Rockchip
+  SoCs.
+
+properties:
+  clocks:
+    minItems: 5
+    items:
+      - description: AHB clock for PCIe master
+      - description: AHB clock for PCIe slave
+      - description: AHB clock for PCIe dbi
+      - description: APB clock for PCIe
+      - description: Auxiliary clock for PCIe
+      - description: PIPE clock
+      - description: Reference clock for PCIe
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: aclk_mst
+      - const: aclk_slv
+      - const: aclk_dbi
+      - const: pclk
+      - const: aux
+      - const: pipe
+      - const: ref
+
+  interrupts:
+    minItems: 5
+    items:
+      - description:
+          Combined system interrupt, which is used to signal the following
+          interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme,
+          hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi,
+          edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app
+      - description:
+          Combined PM interrupt, which is used to signal the following
+          interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2,
+          linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2,
+          linkst_out_l0s, pm_dstate_update
+      - description:
+          Combined message interrupt, which is used to signal the following
+          interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi,
+          pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active
+      - description:
+          Combined legacy interrupt, which is used to signal the following
+          interrupts - inta, intb, intc, intd, tx_inta, tx_intb, tx_intc,
+          tx_intd
+      - description:
+          Combined error interrupt, which is used to signal the following
+          interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout,
+          tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx,
+          nf_err_rx, f_err_rx, radm_qoverflow
+      - description:
+          eDMA write channel 0 interrupt
+      - description:
+          eDMA write channel 1 interrupt
+      - description:
+          eDMA read channel 0 interrupt
+      - description:
+          eDMA read channel 1 interrupt
+
+  interrupt-names:
+    minItems: 5
+    items:
+      - const: sys
+      - const: pmc
+      - const: msg
+      - const: legacy
+      - const: err
+      - const: dma0
+      - const: dma1
+      - const: dma2
+      - const: dma3
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    oneOf:
+      - const: pipe
+      - items:
+          - const: pwr
+          - const: pipe
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - num-lanes
+  - phys
+  - phy-names
+  - power-domains
+  - resets
+  - reset-names
+
+additionalProperties: true
+
+...
diff --git a/dts/upstream/Bindings/pci/rockchip-dw-pcie-ep.yaml b/dts/upstream/Bindings/pci/rockchip-dw-pcie-ep.yaml
new file mode 100644
index 00000000000..f2d1137aff5
--- /dev/null
+++ b/dts/upstream/Bindings/pci/rockchip-dw-pcie-ep.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe Endpoint controller on Rockchip SoCs
+
+maintainers:
+  - Niklas Cassel <cassel@kernel.org>
+
+description: |+
+  RK3588 SoC PCIe Endpoint controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  snps,dw-pcie-ep.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+  - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-pcie-ep
+      - rockchip,rk3588-pcie-ep
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers
+      - description: Data Bus Interface (DBI) shadow registers
+      - description: Rockchip designed configuration registers
+      - description: Memory region used to map remote RC address space
+      - description: Internal Address Translation Unit (iATU) registers
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: apb
+      - const: addr_space
+      - const: atu
+
+required:
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3588-power.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie3x4_ep: pcie-ep@fe150000 {
+            compatible = "rockchip,rk3588-pcie-ep";
+            reg = <0xa 0x40000000 0x0 0x00100000>,
+                  <0xa 0x40100000 0x0 0x00100000>,
+                  <0x0 0xfe150000 0x0 0x00010000>,
+                  <0x9 0x00000000 0x0 0x40000000>,
+                  <0xa 0x40300000 0x0 0x00100000>;
+            reg-names = "dbi", "dbi2", "apb", "addr_space", "atu";
+            clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
+                     <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
+                     <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
+            clock-names = "aclk_mst", "aclk_slv",
+                          "aclk_dbi", "pclk",
+                          "aux", "pipe";
+            interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
+                         <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
+                         <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
+                         <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
+                         <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>,
+                         <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH 0>,
+                         <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>,
+                         <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>,
+                         <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>;
+            interrupt-names = "sys", "pmc", "msg", "legacy", "err",
+                              "dma0", "dma1", "dma2", "dma3";
+            max-link-speed = <3>;
+            num-lanes = <4>;
+            phys = <&pcie30phy>;
+            phy-names = "pcie-phy";
+            power-domains = <&power RK3588_PD_PCIE>;
+            resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
+            reset-names = "pwr", "pipe";
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/pci/rockchip-dw-pcie.yaml b/dts/upstream/Bindings/pci/rockchip-dw-pcie.yaml
index 5f719218c47..550d8a684af 100644
--- a/dts/upstream/Bindings/pci/rockchip-dw-pcie.yaml
+++ b/dts/upstream/Bindings/pci/rockchip-dw-pcie.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DesignWare based PCIe controller on Rockchip SoCs
+title: DesignWare based PCIe Root Complex controller on Rockchip SoCs
 
 maintainers:
   - Shawn Lin <shawn.lin@rock-chips.com>
@@ -12,12 +12,13 @@ maintainers:
   - Heiko Stuebner <heiko@sntech.de>
 
 description: |+
-  RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
+  RK3568 SoC PCIe Root Complex controller is based on the Synopsys DesignWare
   PCIe IP and thus inherits all the common properties defined in
   snps,dw-pcie.yaml.
 
 allOf:
   - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml#
 
 properties:
   compatible:
@@ -40,61 +41,6 @@ properties:
       - const: apb
       - const: config
 
-  clocks:
-    minItems: 5
-    items:
-      - description: AHB clock for PCIe master
-      - description: AHB clock for PCIe slave
-      - description: AHB clock for PCIe dbi
-      - description: APB clock for PCIe
-      - description: Auxiliary clock for PCIe
-      - description: PIPE clock
-      - description: Reference clock for PCIe
-
-  clock-names:
-    minItems: 5
-    items:
-      - const: aclk_mst
-      - const: aclk_slv
-      - const: aclk_dbi
-      - const: pclk
-      - const: aux
-      - const: pipe
-      - const: ref
-
-  interrupts:
-    items:
-      - description:
-          Combined system interrupt, which is used to signal the following
-          interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme,
-          hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi,
-          edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app
-      - description:
-          Combined PM interrupt, which is used to signal the following
-          interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2,
-          linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2,
-          linkst_out_l0s, pm_dstate_update
-      - description:
-          Combined message interrupt, which is used to signal the following
-          interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi,
-          pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active
-      - description:
-          Combined legacy interrupt, which is used to signal the following
-          interrupts - inta, intb, intc, intd
-      - description:
-          Combined error interrupt, which is used to signal the following
-          interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout,
-          tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx,
-          nf_err_rx, f_err_rx, radm_qoverflow
-
-  interrupt-names:
-    items:
-      - const: sys
-      - const: pmc
-      - const: msg
-      - const: legacy
-      - const: err
-
   legacy-interrupt-controller:
     description: Interrupt controller node for handling legacy PCI interrupts.
     type: object
@@ -119,47 +65,14 @@ properties:
 
   msi-map: true
 
-  num-lanes: true
-
-  phys:
-    maxItems: 1
-
-  phy-names:
-    const: pcie-phy
-
-  power-domains:
-    maxItems: 1
-
   ranges:
     minItems: 2
     maxItems: 3
 
-  resets:
-    minItems: 1
-    maxItems: 2
-
-  reset-names:
-    oneOf:
-      - const: pipe
-      - items:
-          - const: pwr
-          - const: pipe
-
   vpcie3v3-supply: true
 
 required:
-  - compatible
-  - reg
-  - reg-names
-  - clocks
-  - clock-names
   - msi-map
-  - num-lanes
-  - phys
-  - phy-names
-  - power-domains
-  - resets
-  - reset-names
 
 unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/pci/snps,dw-pcie-ep.yaml b/dts/upstream/Bindings/pci/snps,dw-pcie-ep.yaml
index bbdb01d2284..f474b9e3fc7 100644
--- a/dts/upstream/Bindings/pci/snps,dw-pcie-ep.yaml
+++ b/dts/upstream/Bindings/pci/snps,dw-pcie-ep.yaml
@@ -100,7 +100,7 @@ properties:
             for new bindings.
           oneOf:
             - description: See native 'elbi/app' CSR region for details.
-              enum: [ link, appl ]
+              enum: [ apb, link, appl ]
             - description: See native 'atu' CSR region for details.
               enum: [ atu_dma ]
     allOf:
@@ -152,11 +152,20 @@ properties:
             events basis.
           const: app
         - description:
+            Interrupts triggered when the controller itself (in Endpoint mode)
+            has sent an Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message to
+            the upstream device.
+          pattern: "^tx_int(a|b|c|d)$"
+        - description:
+            Combined interrupt signal raised when the controller has sent an
+            Assert_INT{A,B,C,D} message. See "^tx_int(a|b|c|d)$" for details.
+          const: legacy
+        - description:
             Vendor-specific IRQ names. Consider using the generic names above
             for new bindings.
           oneOf:
             - description: See native "app" IRQ for details
-              enum: [ intr ]
+              enum: [ intr, sys, pmc, msg, err ]
 
   max-functions:
     maximum: 32
diff --git a/dts/upstream/Bindings/pci/starfive,jh7110-pcie.yaml b/dts/upstream/Bindings/pci/starfive,jh7110-pcie.yaml
new file mode 100644
index 00000000000..67151aaa394
--- /dev/null
+++ b/dts/upstream/Bindings/pci/starfive,jh7110-pcie.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PCIe host controller
+
+maintainers:
+  - Kevin Xie <kevin.xie@starfivetech.com>
+
+allOf:
+  - $ref: plda,xpressrich3-axi-common.yaml#
+
+properties:
+  compatible:
+    const: starfive,jh7110-pcie
+
+  clocks:
+    items:
+      - description: NOC bus clock
+      - description: Transport layer clock
+      - description: AXI MST0 clock
+      - description: APB clock
+
+  clock-names:
+    items:
+      - const: noc
+      - const: tl
+      - const: axi_mst0
+      - const: apb
+
+  resets:
+    items:
+      - description: AXI MST0 reset
+      - description: AXI SLAVE0 reset
+      - description: AXI SLAVE reset
+      - description: PCIE BRIDGE reset
+      - description: PCIE CORE reset
+      - description: PCIE APB reset
+
+  reset-names:
+    items:
+      - const: mst0
+      - const: slv0
+      - const: slv
+      - const: brg
+      - const: core
+      - const: apb
+
+  starfive,stg-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      The phandle to System Register Controller syscon node.
+
+  perst-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  phys:
+    description:
+      Specified PHY is attached to PCIe controller.
+    maxItems: 1
+
+required:
+  - clocks
+  - resets
+  - starfive,stg-syscon
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@940000000 {
+            compatible = "starfive,jh7110-pcie";
+            reg = <0x9 0x40000000 0x0 0x10000000>,
+                  <0x0 0x2b000000 0x0 0x1000000>;
+            reg-names = "cfg", "apb";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            device_type = "pci";
+            ranges = <0x82000000  0x0 0x30000000  0x0 0x30000000 0x0 0x08000000>,
+                     <0xc3000000  0x9 0x00000000  0x9 0x00000000 0x0 0x40000000>;
+            starfive,stg-syscon = <&stg_syscon>;
+            bus-range = <0x0 0xff>;
+            interrupt-parent = <&plic>;
+            interrupts = <56>;
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
+                            <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
+                            <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
+                            <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
+            msi-controller;
+            clocks = <&syscrg 86>,
+                     <&stgcrg 10>,
+                     <&stgcrg 8>,
+                     <&stgcrg 9>;
+            clock-names = "noc", "tl", "axi_mst0", "apb";
+            resets = <&stgcrg 11>,
+                     <&stgcrg 12>,
+                     <&stgcrg 13>,
+                     <&stgcrg 14>,
+                     <&stgcrg 15>,
+                     <&stgcrg 16>;
+            perst-gpios = <&gpios 26 GPIO_ACTIVE_LOW>;
+            phys = <&pciephy0>;
+
+            pcie_intc0: interrupt-controller {
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+                interrupt-controller;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/pci/xilinx-versal-cpm.yaml b/dts/upstream/Bindings/pci/xilinx-versal-cpm.yaml
index 4770ce02fcc..989fb0fa257 100644
--- a/dts/upstream/Bindings/pci/xilinx-versal-cpm.yaml
+++ b/dts/upstream/Bindings/pci/xilinx-versal-cpm.yaml
@@ -92,7 +92,7 @@ examples:
                                        <0 0 0 3 &pcie_intc_0 2>,
                                        <0 0 0 4 &pcie_intc_0 3>;
                        bus-range = <0x00 0xff>;
-                       ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                       ranges = <0x02000000 0x0 0xe0010000 0x0 0xe0010000 0x0 0x10000000>,
                                 <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
                        msi-map = <0x0 &its_gic 0x0 0x10000>;
                        reg = <0x0 0xfca10000 0x0 0x1000>,
diff --git a/dts/upstream/Bindings/perf/fsl-imx-ddr.yaml b/dts/upstream/Bindings/perf/fsl-imx-ddr.yaml
index 6c96a4204e5..37e8b98f2cd 100644
--- a/dts/upstream/Bindings/perf/fsl-imx-ddr.yaml
+++ b/dts/upstream/Bindings/perf/fsl-imx-ddr.yaml
@@ -30,6 +30,9 @@ properties:
       - items:
           - const: fsl,imx8dxl-ddr-pmu
           - const: fsl,imx8-ddr-pmu
+      - items:
+          - const: fsl,imx95-ddr-pmu
+          - const: fsl,imx93-ddr-pmu
 
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/phy/airoha,en7581-pcie-phy.yaml b/dts/upstream/Bindings/phy/airoha,en7581-pcie-phy.yaml
new file mode 100644
index 00000000000..98fcb1b364d
--- /dev/null
+++ b/dts/upstream/Bindings/phy/airoha,en7581-pcie-phy.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/airoha,en7581-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 PCI-Express PHY
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  The PCIe PHY supports physical layer functionality for PCIe Gen2/Gen3 port.
+
+properties:
+  compatible:
+    const: airoha,en7581-pcie-phy
+
+  reg:
+    items:
+      - description: PCIE analog base address
+      - description: PCIE lane0 base address
+      - description: PCIE lane1 base address
+      - description: PCIE lane0 detection time base address
+      - description: PCIE lane1 detection time base address
+      - description: PCIE Rx AEQ base address
+
+  reg-names:
+    items:
+      - const: csr-2l
+      - const: pma0
+      - const: pma1
+      - const: p0-xr-dtime
+      - const: p1-xr-dtime
+      - const: rx-aeq
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        phy@11e80000 {
+            compatible = "airoha,en7581-pcie-phy";
+            #phy-cells = <0>;
+            reg = <0x0 0x1fa5a000 0x0 0xfff>,
+                  <0x0 0x1fa5b000 0x0 0xfff>,
+                  <0x0 0x1fa5c000 0x0 0xfff>,
+                  <0x0 0x1fc10044 0x0 0x4>,
+                  <0x0 0x1fc30044 0x0 0x4>,
+                  <0x0 0x1fc15030 0x0 0x104>;
+            reg-names = "csr-2l", "pma0", "pma1",
+                        "p0-xr-dtime", "p1-xr-dtime",
+                        "rx-aeq";
+        };
+    };
diff --git a/dts/upstream/Bindings/phy/amlogic,g12a-usb2-phy.yaml b/dts/upstream/Bindings/phy/amlogic,g12a-usb2-phy.yaml
index 0031fb6a4e7..1a0c436b87a 100644
--- a/dts/upstream/Bindings/phy/amlogic,g12a-usb2-phy.yaml
+++ b/dts/upstream/Bindings/phy/amlogic,g12a-usb2-phy.yaml
@@ -41,6 +41,9 @@ properties:
       Phandle to a regulator that provides power to the PHY. This
       regulator will be managed during the PHY power on/off sequence.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/phy/fsl,imx8qm-hsio.yaml b/dts/upstream/Bindings/phy/fsl,imx8qm-hsio.yaml
new file mode 100644
index 00000000000..147bbfd2cd5
--- /dev/null
+++ b/dts/upstream/Bindings/phy/fsl,imx8qm-hsio.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8qm-hsio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8QM SoC series High Speed IO(HSIO) SERDES PHY
+
+maintainers:
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-hsio
+      - fsl,imx8qxp-hsio
+  reg:
+    items:
+      - description: Base address and length of the PHY block
+      - description: HSIO control and status registers(CSR) of the PHY
+      - description: HSIO CSR of the controller bound to the PHY
+      - description: HSIO CSR for MISC
+
+  reg-names:
+    items:
+      - const: reg
+      - const: phy
+      - const: ctrl
+      - const: misc
+
+  "#phy-cells":
+    const: 3
+    description:
+      The first defines lane index.
+      The second defines the type of the PHY refer to the include phy.h.
+      The third defines the controller index, indicated which controller
+      is bound to the lane.
+
+  clocks:
+    minItems: 5
+    maxItems: 14
+
+  clock-names:
+    minItems: 5
+    maxItems: 14
+
+  fsl,hsio-cfg:
+    description: |
+      Specifies the use case of the HSIO module in the hardware design.
+      Regarding the design of i.MX8QM HSIO subsystem, HSIO module can be
+      confiured as following three use cases.
+      +---------------------------------------+
+      |                  | i.MX8QM            |
+      |------------------|--------------------|
+      |                  | Lane0| Lane1| Lane2|
+      |------------------|------|------|------|
+      | pciea-x2-sata    | PCIEA| PCIEA| SATA |
+      |------------------|------|------|------|
+      | pciea-x2-pcieb   | PCIEA| PCIEA| PCIEB|
+      |------------------|------|------|------|
+      | pciea-pcieb-sata | PCIEA| PCIEB| SATA |
+      +---------------------------------------+
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ pciea-x2-sata, pciea-x2-pcieb, pciea-pcieb-sata]
+    default: pciea-pcieb-sata
+
+  fsl,refclk-pad-mode:
+    description:
+      Specifies the mode of the refclk pad used. INPUT(PHY refclock is
+      provided externally via the refclk pad) or OUTPUT(PHY refclock is
+      derived from SoC internal source and provided on the refclk pad).
+      This property not exists means unused(PHY refclock is derived from
+      SoC internal source).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ input, output, unused ]
+    default: unused
+
+  power-domains:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - fsl,hsio-cfg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-hsio
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pclk0
+            - const: apb_pclk0
+            - const: phy0_crr
+            - const: ctl0_crr
+            - const: misc_crr
+        power-domains:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-hsio
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pclk0
+            - const: pclk1
+            - const: apb_pclk0
+            - const: apb_pclk1
+            - const: pclk2
+            - const: epcs_tx
+            - const: epcs_rx
+            - const: apb_pclk2
+            - const: phy0_crr
+            - const: phy1_crr
+            - const: ctl0_crr
+            - const: ctl1_crr
+            - const: ctl2_crr
+            - const: misc_crr
+        power-domains:
+          minItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-clock.h>
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/phy/phy-imx8-pcie.h>
+
+    phy@5f1a0000 {
+        compatible = "fsl,imx8qxp-hsio";
+        reg = <0x5f1a0000 0x10000>,
+              <0x5f120000 0x10000>,
+              <0x5f140000 0x10000>,
+              <0x5f160000 0x10000>;
+        reg-names = "reg", "phy", "ctrl", "misc";
+        clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
+                 <&phyx1_lpcg IMX_LPCG_CLK_4>,
+                 <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+                 <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+                 <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr", "misc_crr";
+        power-domains = <&pd IMX_SC_R_SERDES_1>;
+        #phy-cells = <3>;
+        fsl,hsio-cfg = "pciea-pcieb-sata";
+        fsl,refclk-pad-mode = "input";
+    };
+...
diff --git a/dts/upstream/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml b/dts/upstream/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml
index 9ce7b4c6d20..2ef02aac042 100644
--- a/dts/upstream/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml
+++ b/dts/upstream/Bindings/phy/marvell,armada-cp110-utmi-phy.yaml
@@ -41,6 +41,12 @@ properties:
       Phandle to the system controller node
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  swap-dx-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Specifies the ports which will swap the differential-pair (D+/D-),
+      default is not-swapped.
+
 # Required child nodes:
 
 patternProperties:
diff --git a/dts/upstream/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/dts/upstream/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
index 634cec5d57e..58ce2d91d28 100644
--- a/dts/upstream/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
+++ b/dts/upstream/Bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
@@ -19,6 +19,8 @@ properties:
       - qcom,ipq6018-qmp-pcie-phy
       - qcom,ipq8074-qmp-gen3-pcie-phy
       - qcom,ipq8074-qmp-pcie-phy
+      - qcom,ipq9574-qmp-gen3x1-pcie-phy
+      - qcom,ipq9574-qmp-gen3x2-pcie-phy
 
   reg:
     items:
diff --git a/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 16634f73bdc..03dbd02cf9e 100644
--- a/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -91,8 +91,7 @@ properties:
   "#clock-cells": true
 
   clock-output-names:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
   "#phy-cells":
     const: 0
@@ -222,14 +221,10 @@ allOf:
               - qcom,sm8650-qmp-gen4x2-pcie-phy
     then:
       properties:
-        clock-output-names:
-          minItems: 2
         "#clock-cells":
           const: 1
     else:
       properties:
-        clock-output-names:
-          maxItems: 1
         "#clock-cells":
           const: 0
 
diff --git a/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 325585bc881..0e0b6cae07b 100644
--- a/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/dts/upstream/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -20,8 +20,9 @@ properties:
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,ipq9574-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
-      - com,qdu1000-qmp-usb3-uni-phy
+      - qcom,qdu1000-qmp-usb3-uni-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
+      - qcom,sc8180x-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
@@ -112,6 +113,7 @@ allOf:
             enum:
               - qcom,qdu1000-qmp-usb3-uni-phy
               - qcom,sa8775p-qmp-usb3-uni-phy
+              - qcom,sc8180x-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
@@ -152,6 +154,7 @@ allOf:
           contains:
             enum:
               - qcom,sa8775p-qmp-usb3-uni-phy
+              - qcom,sc8180x-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,x1e80100-qmp-usb3-uni-phy
     then:
diff --git a/dts/upstream/Bindings/phy/qcom,usb-hs-phy.yaml b/dts/upstream/Bindings/phy/qcom,usb-hs-phy.yaml
index f042d6af159..e03b516c698 100644
--- a/dts/upstream/Bindings/phy/qcom,usb-hs-phy.yaml
+++ b/dts/upstream/Bindings/phy/qcom,usb-hs-phy.yaml
@@ -15,6 +15,7 @@ if:
       contains:
         enum:
           - qcom,usb-hs-phy-apq8064
+          - qcom,usb-hs-phy-msm8660
           - qcom,usb-hs-phy-msm8960
 then:
   properties:
@@ -41,6 +42,7 @@ properties:
       - enum:
           - qcom,usb-hs-phy-apq8064
           - qcom,usb-hs-phy-msm8226
+          - qcom,usb-hs-phy-msm8660
           - qcom,usb-hs-phy-msm8916
           - qcom,usb-hs-phy-msm8960
           - qcom,usb-hs-phy-msm8974
diff --git a/dts/upstream/Bindings/phy/rockchip,rk3399-emmc-phy.yaml b/dts/upstream/Bindings/phy/rockchip,rk3399-emmc-phy.yaml
new file mode 100644
index 00000000000..3e3729b1c79
--- /dev/null
+++ b/dts/upstream/Bindings/phy/rockchip,rk3399-emmc-phy.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,rk3399-emmc-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip EMMC PHY
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3399-emmc-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: emmcclk
+
+  drive-impedance-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies the drive impedance in Ohm.
+    enum: [33, 40, 50, 66, 100]
+    default: 50
+
+  rockchip,enable-strobe-pulldown:
+    type: boolean
+    description: |
+      Enable internal pull-down for the strobe
+      line.  If not set, pull-down is not used.
+
+  rockchip,output-tapdelay-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies the phyctrl_otapdlysec register.
+    default: 0x4
+    maximum: 0xf
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@f780 {
+      compatible = "rockchip,rk3399-emmc-phy";
+      reg = <0xf780 0x20>;
+      clocks = <&sdhci>;
+      clock-names = "emmcclk";
+      drive-impedance-ohm = <50>;
+      #phy-cells = <0>;
+    };
diff --git a/dts/upstream/Bindings/phy/rockchip-emmc-phy.txt b/dts/upstream/Bindings/phy/rockchip-emmc-phy.txt
deleted file mode 100644
index 57d28c0d569..00000000000
--- a/dts/upstream/Bindings/phy/rockchip-emmc-phy.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Rockchip EMMC PHY
------------------------
-
-Required properties:
- - compatible: rockchip,rk3399-emmc-phy
- - #phy-cells: must be 0
- - reg: PHY register address offset and length in "general
-   register files"
-
-Optional properties:
- - clock-names: Should contain "emmcclk".  Although this is listed as optional
-		(because most boards can get basic functionality without having
-		access to it), it is strongly suggested.
-		See ../clock/clock-bindings.txt for details.
- - clocks: Should have a phandle to the card clock exported by the SDHCI driver.
- - drive-impedance-ohm: Specifies the drive impedance in Ohm.
-                        Possible values are 33, 40, 50, 66 and 100.
-                        If not set, the default value of 50 will be applied.
- - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe
-                                    line.  If not set, pull-down is not used.
- - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register.
-                                    If not set, the register defaults to 0x4.
-                                    Maximum value 0xf.
-
-Example:
-
-
-grf: syscon@ff770000 {
-	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-...
-
-	emmcphy: phy@f780 {
-		compatible = "rockchip,rk3399-emmc-phy";
-		reg = <0xf780 0x20>;
-		clocks = <&sdhci>;
-		clock-names = "emmcclk";
-		drive-impedance-ohm = <50>;
-		#phy-cells = <0>;
-	};
-};
diff --git a/dts/upstream/Bindings/phy/samsung,usb3-drd-phy.yaml b/dts/upstream/Bindings/phy/samsung,usb3-drd-phy.yaml
index 452e584d981..16321cdd491 100644
--- a/dts/upstream/Bindings/phy/samsung,usb3-drd-phy.yaml
+++ b/dts/upstream/Bindings/phy/samsung,usb3-drd-phy.yaml
@@ -25,6 +25,7 @@ description: |
 properties:
   compatible:
     enum:
+      - google,gs101-usb31drd-phy
       - samsung,exynos5250-usbdrd-phy
       - samsung,exynos5420-usbdrd-phy
       - samsung,exynos5433-usbdrd-phy
@@ -57,7 +58,15 @@ properties:
       the OF graph bindings specified.
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: phy
+      - const: pcs
+      - const: pma
 
   samsung,pmu-syscon:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -72,6 +81,19 @@ properties:
     description:
       VBUS Boost 5V power source.
 
+  pll-supply:
+    description: Power supply for the USB PLL.
+  dvdd-usb20-supply:
+    description: DVDD power supply for the USB 2.0 phy.
+  vddh-usb20-supply:
+    description: VDDh power supply for the USB 2.0 phy.
+  vdd33-usb20-supply:
+    description: 3.3V power supply for the USB 2.0 phy.
+  vdda-usbdp-supply:
+    description: VDDa power supply for the USB DP phy.
+  vddh-usbdp-supply:
+    description: VDDh power supply for the USB DP phy.
+
 required:
   - compatible
   - clocks
@@ -85,6 +107,40 @@ allOf:
       properties:
         compatible:
           contains:
+            const: google,gs101-usb31drd-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Gate of main PHY clock
+            - description: Gate of PHY reference clock
+            - description: Gate of control interface AXI clock
+            - description: Gate of control interface APB clock
+            - description: Gate of SCL APB clock
+        clock-names:
+          items:
+            - const: phy
+            - const: ref
+            - const: ctrl_aclk
+            - const: ctrl_pclk
+            - const: scl_pclk
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+      required:
+        - reg-names
+        - pll-supply
+        - dvdd-usb20-supply
+        - vddh-usb20-supply
+        - vdd33-usb20-supply
+        - vdda-usbdp-supply
+        - vddh-usbdp-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
             enum:
               - samsung,exynos5433-usbdrd-phy
               - samsung,exynos7-usbdrd-phy
@@ -100,7 +156,20 @@ allOf:
             - const: phy_utmi
             - const: phy_pipe
             - const: itp
-    else:
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-usbdrd-phy
+              - samsung,exynos5420-usbdrd-phy
+              - samsung,exynos850-usbdrd-phy
+    then:
       properties:
         clocks:
           minItems: 2
@@ -109,6 +178,10 @@ allOf:
           items:
             - const: phy
             - const: ref
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
 
 additionalProperties: false
 
diff --git a/dts/upstream/Bindings/phy/starfive,jh7110-dphy-tx.yaml b/dts/upstream/Bindings/phy/starfive,jh7110-dphy-tx.yaml
new file mode 100644
index 00000000000..4a06a2642b4
--- /dev/null
+++ b/dts/upstream/Bindings/phy/starfive,jh7110-dphy-tx.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive SoC MIPI D-PHY Tx Controller
+
+maintainers:
+  - Keith Zhao <keith.zhao@starfivetech.com>
+  - Shengyang Chen <shengyang.chen@starfivetech.com>
+
+description:
+  The Starfive SoC uses the MIPI DSI D-PHY based on M31 IP to transfer
+  DSI data.
+
+properties:
+  compatible:
+    const: starfive,jh7110-dphy-tx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: txesc
+
+  resets:
+    items:
+      - description: MIPITX_DPHY_SYS reset
+
+  reset-names:
+    items:
+      - const: sys
+
+  power-domains:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@295e0000 {
+      compatible = "starfive,jh7110-dphy-tx";
+      reg = <0x295e0000 0x10000>;
+      clocks = <&voutcrg 14>;
+      clock-names = "txesc";
+      resets = <&syscrg 10>;
+      reset-names = "sys";
+      power-domains = <&aon_syscon 0>;
+      #phy-cells = <0>;
+    };
diff --git a/dts/upstream/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 37c0a74c7c0..23ed9a8b668 100644
--- a/dts/upstream/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/dts/upstream/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -35,22 +35,159 @@ additionalProperties:
 
   patternProperties:
     "^function|groups$":
-      enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
-              EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
-              GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
-              I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
-              MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
-              NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
-              NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
-              PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
-              RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
-              RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
-              SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
-              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
-              SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
-              TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
-              VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
+      enum:
+        - ACPI
+        - ADC0
+        - ADC1
+        - ADC10
+        - ADC11
+        - ADC12
+        - ADC13
+        - ADC14
+        - ADC15
+        - ADC2
+        - ADC3
+        - ADC4
+        - ADC5
+        - ADC6
+        - ADC7
+        - ADC8
+        - ADC9
+        - BMCINT
+        - DDCCLK
+        - DDCDAT
+        - EXTRST
+        - FLACK
+        - FLBUSY
+        - FLWP
+        - GPID
+        - GPID0
+        - GPID2
+        - GPID4
+        - GPID6
+        - GPIE0
+        - GPIE2
+        - GPIE4
+        - GPIE6
+        - I2C10
+        - I2C11
+        - I2C12
+        - I2C13
+        - I2C14
+        - I2C3
+        - I2C4
+        - I2C5
+        - I2C6
+        - I2C7
+        - I2C8
+        - I2C9
+        - LPCPD
+        - LPCPME
+        - LPCRST
+        - LPCSMI
+        - MAC1LINK
+        - MAC2LINK
+        - MDIO1
+        - MDIO2
+        - NCTS1
+        - NCTS2
+        - NCTS3
+        - NCTS4
+        - NDCD1
+        - NDCD2
+        - NDCD3
+        - NDCD4
+        - NDSR1
+        - NDSR2
+        - NDSR3
+        - NDSR4
+        - NDTR1
+        - NDTR2
+        - NDTR3
+        - NDTR4
+        - NDTS4
+        - NRI1
+        - NRI2
+        - NRI3
+        - NRI4
+        - NRTS1
+        - NRTS2
+        - NRTS3
+        - OSCCLK
+        - PWM0
+        - PWM1
+        - PWM2
+        - PWM3
+        - PWM4
+        - PWM5
+        - PWM6
+        - PWM7
+        - RGMII1
+        - RGMII2
+        - RMII1
+        - RMII2
+        - ROM16
+        - ROM8
+        - ROMCS1
+        - ROMCS2
+        - ROMCS3
+        - ROMCS4
+        - RXD1
+        - RXD2
+        - RXD3
+        - RXD4
+        - SALT1
+        - SALT2
+        - SALT3
+        - SALT4
+        - SD1
+        - SD2
+        - SGPMCK
+        - SGPMI
+        - SGPMLD
+        - SGPMO
+        - SGPSCK
+        - SGPSI0
+        - SGPSI1
+        - SGPSLD
+        - SIOONCTRL
+        - SIOPBI
+        - SIOPBO
+        - SIOPWREQ
+        - SIOPWRGD
+        - SIOS3
+        - SIOS5
+        - SIOSCI
+        - SPI1
+        - SPI1DEBUG
+        - SPI1PASSTHRU
+        - SPICS1
+        - TIMER3
+        - TIMER4
+        - TIMER5
+        - TIMER6
+        - TIMER7
+        - TIMER8
+        - TXD1
+        - TXD2
+        - TXD3
+        - TXD4
+        - UART6
+        - USB11D1
+        - USB11H2
+        - USB2D1
+        - USB2H1
+        - USBCKI
+        - VGABIOS_ROM
+        - VGAHS
+        - VGAVS
+        - VPI18
+        - VPI24
+        - VPI30
+        - VPO12
+        - VPO24
+        - WDTRST1
+        - WDTRST2
 
 allOf:
   - $ref: pinctrl.yaml#
diff --git a/dts/upstream/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 863da5d8082..35bd0e1eada 100644
--- a/dts/upstream/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/dts/upstream/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -35,7 +35,7 @@ properties:
     description: |
       A cell of phandles to external controller nodes:
       0: compatible with "aspeed,ast2500-gfx", "syscon"
-      1: compatible with "aspeed,ast2500-lhc", "syscon"
+      1: compatible with "aspeed,ast2500-lpc", "syscon"
 
 additionalProperties:
   $ref: pinmux-node.yaml#
@@ -47,24 +47,174 @@ additionalProperties:
 
   patternProperties:
     "^function|groups$":
-      enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
-              ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
-              GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
-              I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
-              LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
-              MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
-              NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
-              NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
-              PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
-              RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
-              SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
-              SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
-              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
-              SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
-              TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
-              USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
-              VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
+      enum:
+        - ACPI
+        - ADC0
+        - ADC1
+        - ADC10
+        - ADC11
+        - ADC12
+        - ADC13
+        - ADC14
+        - ADC15
+        - ADC2
+        - ADC3
+        - ADC4
+        - ADC5
+        - ADC6
+        - ADC7
+        - ADC8
+        - ADC9
+        - BMCINT
+        - DDCCLK
+        - DDCDAT
+        - ESPI
+        - FWSPICS1
+        - FWSPICS2
+        - GPID0
+        - GPID2
+        - GPID4
+        - GPID6
+        - GPIE0
+        - GPIE2
+        - GPIE4
+        - GPIE6
+        - I2C10
+        - I2C11
+        - I2C12
+        - I2C13
+        - I2C14
+        - I2C3
+        - I2C4
+        - I2C5
+        - I2C6
+        - I2C7
+        - I2C8
+        - I2C9
+        - LAD0
+        - LAD1
+        - LAD2
+        - LAD3
+        - LCLK
+        - LFRAME
+        - LPCHC
+        - LPCPD
+        - LPCPLUS
+        - LPCPME
+        - LPCRST
+        - LPCSMI
+        - LSIRQ
+        - MAC1LINK
+        - MAC2LINK
+        - MDIO1
+        - MDIO2
+        - NCTS1
+        - NCTS2
+        - NCTS3
+        - NCTS4
+        - NDCD1
+        - NDCD2
+        - NDCD3
+        - NDCD4
+        - NDSR1
+        - NDSR2
+        - NDSR3
+        - NDSR4
+        - NDTR1
+        - NDTR2
+        - NDTR3
+        - NDTR4
+        - NRI1
+        - NRI2
+        - NRI3
+        - NRI4
+        - NRTS1
+        - NRTS2
+        - NRTS3
+        - NRTS4
+        - OSCCLK
+        - PEWAKE
+        - PNOR
+        - PWM0
+        - PWM1
+        - PWM2
+        - PWM3
+        - PWM4
+        - PWM5
+        - PWM6
+        - PWM7
+        - RGMII1
+        - RGMII2
+        - RMII1
+        - RMII2
+        - RXD1
+        - RXD2
+        - RXD3
+        - RXD4
+        - SALT1
+        - SALT10
+        - SALT11
+        - SALT12
+        - SALT13
+        - SALT14
+        - SALT2
+        - SALT3
+        - SALT4
+        - SALT5
+        - SALT6
+        - SALT7
+        - SALT8
+        - SALT9
+        - SCL1
+        - SCL2
+        - SD1
+        - SD2
+        - SDA1
+        - SDA2
+        - SGPM
+        - SGPS1
+        - SGPS2
+        - SIOONCTRL
+        - SIOPBI
+        - SIOPBO
+        - SIOPWREQ
+        - SIOPWRGD
+        - SIOS3
+        - SIOS5
+        - SIOSCI
+        - SPI1
+        - SPI1CS1
+        - SPI1DEBUG
+        - SPI1PASSTHRU
+        - SPI2CK
+        - SPI2CS0
+        - SPI2CS1
+        - SPI2MISO
+        - SPI2MOSI
+        - TIMER3
+        - TIMER4
+        - TIMER5
+        - TIMER6
+        - TIMER7
+        - TIMER8
+        - TXD1
+        - TXD2
+        - TXD3
+        - TXD4
+        - UART6
+        - USB11BHID
+        - USB2AD
+        - USB2AH
+        - USB2BD
+        - USB2BH
+        - USBCKI
+        - VGABIOSROM
+        - VGAHS
+        - VGAVS
+        - VPI24
+        - VPO
+        - WDTRST1
+        - WDTRST2
 
 allOf:
   - $ref: pinctrl.yaml#
diff --git a/dts/upstream/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 612464aef98..80974c46f3e 100644
--- a/dts/upstream/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/dts/upstream/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -19,6 +19,11 @@ description: |+
   Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
+  Note: According to the NCSI specification, the reference clock output pin
+  (RMIIXRCLKO) is not required on the management controller side. To optimize
+  pin usage, add "NCSI" pin groups that are equivalent to the RMII pin groups,
+  but without the RMIIXRCLKO pin.
+
 properties:
   compatible:
     const: aspeed,ast2600-pinctrl
@@ -29,56 +34,469 @@ additionalProperties:
 
   properties:
     function:
-      enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
-              ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
-              FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
-              GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
-              GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
-              I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
-              I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
-              MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
-              NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
-              NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
-              NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
-              PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
-              PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
-              RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
-              SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
-              SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
-              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
-              SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
-              TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
-              THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
-              UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
-              USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
+      enum:
+        - ADC0
+        - ADC1
+        - ADC10
+        - ADC11
+        - ADC12
+        - ADC13
+        - ADC14
+        - ADC15
+        - ADC2
+        - ADC3
+        - ADC4
+        - ADC5
+        - ADC6
+        - ADC7
+        - ADC8
+        - ADC9
+        - BMCINT
+        - EMMC
+        - ESPI
+        - ESPIALT
+        - FSI1
+        - FSI2
+        - FWQSPI
+        - FWSPIABR
+        - FWSPID
+        - FWSPIWP
+        - GPIT0
+        - GPIT1
+        - GPIT2
+        - GPIT3
+        - GPIT4
+        - GPIT5
+        - GPIT6
+        - GPIT7
+        - GPIU0
+        - GPIU1
+        - GPIU2
+        - GPIU3
+        - GPIU4
+        - GPIU5
+        - GPIU6
+        - GPIU7
+        - I2C1
+        - I2C10
+        - I2C11
+        - I2C12
+        - I2C13
+        - I2C14
+        - I2C15
+        - I2C16
+        - I2C2
+        - I2C3
+        - I2C4
+        - I2C5
+        - I2C6
+        - I2C7
+        - I2C8
+        - I2C9
+        - I3C1
+        - I3C2
+        - I3C3
+        - I3C4
+        - I3C5
+        - I3C6
+        - JTAGM
+        - LHPD
+        - LHSIRQ
+        - LPC
+        - LPCHC
+        - LPCPD
+        - LPCPME
+        - LPCSMI
+        - LSIRQ
+        - MACLINK1
+        - MACLINK2
+        - MACLINK3
+        - MACLINK4
+        - MDIO1
+        - MDIO2
+        - MDIO3
+        - MDIO4
+        - NCTS1
+        - NCTS2
+        - NCTS3
+        - NCTS4
+        - NDCD1
+        - NDCD2
+        - NDCD3
+        - NDCD4
+        - NDSR1
+        - NDSR2
+        - NDSR3
+        - NDSR4
+        - NDTR1
+        - NDTR2
+        - NDTR3
+        - NDTR4
+        - NRI1
+        - NRI2
+        - NRI3
+        - NRI4
+        - NRTS1
+        - NRTS2
+        - NRTS3
+        - NRTS4
+        - OSCCLK
+        - PEWAKE
+        - PWM0
+        - PWM1
+        - PWM10
+        - PWM11
+        - PWM12
+        - PWM13
+        - PWM14
+        - PWM15
+        - PWM2
+        - PWM3
+        - PWM4
+        - PWM5
+        - PWM6
+        - PWM7
+        - PWM8
+        - PWM9
+        - RGMII1
+        - RGMII2
+        - RGMII3
+        - RGMII4
+        - RMII1
+        - RMII2
+        - RMII3
+        - RMII4
+        - RXD1
+        - RXD2
+        - RXD3
+        - RXD4
+        - SALT1
+        - SALT10
+        - SALT11
+        - SALT12
+        - SALT13
+        - SALT14
+        - SALT15
+        - SALT16
+        - SALT2
+        - SALT3
+        - SALT4
+        - SALT5
+        - SALT6
+        - SALT7
+        - SALT8
+        - SALT9
+        - SD1
+        - SD2
+        - SGPM1
+        - SGPM2
+        - SGPS1
+        - SGPS2
+        - SIOONCTRL
+        - SIOPBI
+        - SIOPBO
+        - SIOPWREQ
+        - SIOPWRGD
+        - SIOS3
+        - SIOS5
+        - SIOSCI
+        - SPI1
+        - SPI1ABR
+        - SPI1CS1
+        - SPI1WP
+        - SPI2
+        - SPI2CS1
+        - SPI2CS2
+        - TACH0
+        - TACH1
+        - TACH10
+        - TACH11
+        - TACH12
+        - TACH13
+        - TACH14
+        - TACH15
+        - TACH2
+        - TACH3
+        - TACH4
+        - TACH5
+        - TACH6
+        - TACH7
+        - TACH8
+        - TACH9
+        - THRU0
+        - THRU1
+        - THRU2
+        - THRU3
+        - TXD1
+        - TXD2
+        - TXD3
+        - TXD4
+        - UART10
+        - UART11
+        - UART12
+        - UART13
+        - UART6
+        - UART7
+        - UART8
+        - UART9
+        - USB11BHID
+        - USB2AD
+        - USB2AH
+        - USB2AHP
+        - USB2BD
+        - USB2BH
+        - USBAD
+        - USBADP
+        - VB
+        - VGAHS
+        - VGAVS
+        - WDTRST1
+        - WDTRST2
+        - WDTRST3
+        - WDTRST4
 
     groups:
-      enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
-              ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
-              EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP,
-              GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
-              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
-              I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
-              I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
-              LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
-              MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
-              NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
-              NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
-              OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
-              PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
-              PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
-              QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
-              RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
-              SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
-              SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
-              SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2,
-              SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
-              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
-              TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
-              TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
-              TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
-              UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
-              WDTRST3, WDTRST4]
+      enum:
+        - ADC0
+        - ADC1
+        - ADC10
+        - ADC11
+        - ADC12
+        - ADC13
+        - ADC14
+        - ADC15
+        - ADC2
+        - ADC3
+        - ADC4
+        - ADC5
+        - ADC6
+        - ADC7
+        - ADC8
+        - ADC9
+        - BMCINT
+        - EMMCG1
+        - EMMCG4
+        - EMMCG8
+        - ESPI
+        - ESPIALT
+        - FSI1
+        - FSI2
+        - FWQSPI
+        - FWSPIABR
+        - FWSPID
+        - FWSPIWP
+        - GPIT0
+        - GPIT1
+        - GPIT2
+        - GPIT3
+        - GPIT4
+        - GPIT5
+        - GPIT6
+        - GPIT7
+        - GPIU0
+        - GPIU1
+        - GPIU2
+        - GPIU3
+        - GPIU4
+        - GPIU5
+        - GPIU6
+        - GPIU7
+        - HVI3C3
+        - HVI3C4
+        - I2C1
+        - I2C10
+        - I2C11
+        - I2C12
+        - I2C13
+        - I2C14
+        - I2C15
+        - I2C16
+        - I2C2
+        - I2C3
+        - I2C4
+        - I2C5
+        - I2C6
+        - I2C7
+        - I2C8
+        - I2C9
+        - I3C1
+        - I3C2
+        - I3C3
+        - I3C4
+        - I3C5
+        - I3C6
+        - JTAGM
+        - LHPD
+        - LHSIRQ
+        - LPC
+        - LPCHC
+        - LPCPD
+        - LPCPME
+        - LPCSMI
+        - LSIRQ
+        - MACLINK1
+        - MACLINK2
+        - MACLINK3
+        - MACLINK4
+        - MDIO1
+        - MDIO2
+        - MDIO3
+        - MDIO4
+        - NCSI3
+        - NCSI4
+        - NCTS1
+        - NCTS2
+        - NCTS3
+        - NCTS4
+        - NDCD1
+        - NDCD2
+        - NDCD3
+        - NDCD4
+        - NDSR1
+        - NDSR2
+        - NDSR3
+        - NDSR4
+        - NDTR1
+        - NDTR2
+        - NDTR3
+        - NDTR4
+        - NRI1
+        - NRI2
+        - NRI3
+        - NRI4
+        - NRTS1
+        - NRTS2
+        - NRTS3
+        - NRTS4
+        - OSCCLK
+        - PEWAKE
+        - PWM0
+        - PWM1
+        - PWM10G0
+        - PWM10G1
+        - PWM11G0
+        - PWM11G1
+        - PWM12G0
+        - PWM12G1
+        - PWM13G0
+        - PWM13G1
+        - PWM14G0
+        - PWM14G1
+        - PWM15G0
+        - PWM15G1
+        - PWM2
+        - PWM3
+        - PWM4
+        - PWM5
+        - PWM6
+        - PWM7
+        - PWM8G0
+        - PWM8G1
+        - PWM9G0
+        - PWM9G1
+        - QSPI1
+        - QSPI2
+        - RGMII1
+        - RGMII2
+        - RGMII3
+        - RGMII4
+        - RMII1
+        - RMII2
+        - RMII3
+        - RMII4
+        - RXD1
+        - RXD2
+        - RXD3
+        - RXD4
+        - SALT1
+        - SALT10G0
+        - SALT10G1
+        - SALT11G0
+        - SALT11G1
+        - SALT12G0
+        - SALT12G1
+        - SALT13G0
+        - SALT13G1
+        - SALT14G0
+        - SALT14G1
+        - SALT15G0
+        - SALT15G1
+        - SALT16G0
+        - SALT16G1
+        - SALT2
+        - SALT3
+        - SALT4
+        - SALT5
+        - SALT6
+        - SALT7
+        - SALT8
+        - SALT9G0
+        - SALT9G1
+        - SD1
+        - SD2
+        - SD3
+        - SGPM1
+        - SGPM2
+        - SGPS1
+        - SGPS2
+        - SIOONCTRL
+        - SIOPBI
+        - SIOPBO
+        - SIOPWREQ
+        - SIOPWRGD
+        - SIOS3
+        - SIOS5
+        - SIOSCI
+        - SPI1
+        - SPI1ABR
+        - SPI1CS1
+        - SPI1WP
+        - SPI2
+        - SPI2CS1
+        - SPI2CS2
+        - TACH0
+        - TACH1
+        - TACH10
+        - TACH11
+        - TACH12
+        - TACH13
+        - TACH14
+        - TACH15
+        - TACH2
+        - TACH3
+        - TACH4
+        - TACH5
+        - TACH6
+        - TACH7
+        - TACH8
+        - TACH9
+        - THRU0
+        - THRU1
+        - THRU2
+        - THRU3
+        - TXD1
+        - TXD2
+        - TXD3
+        - TXD4
+        - UART10
+        - UART11
+        - UART12G0
+        - UART12G1
+        - UART13G0
+        - UART13G1
+        - UART6
+        - UART7
+        - UART8
+        - UART9
+        - USBA
+        - USBB
+        - VB
+        - VGAHS
+        - VGAVS
+        - WDTRST1
+        - WDTRST2
+        - WDTRST3
+        - WDTRST4
 
     pins: true
     bias-disable: true
diff --git a/dts/upstream/Bindings/pinctrl/fsl,imx93-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/fsl,imx9-pinctrl.yaml
index 2f240510299..a438db8884f 100644
--- a/dts/upstream/Bindings/pinctrl/fsl,imx93-pinctrl.yaml
+++ b/dts/upstream/Bindings/pinctrl/fsl,imx9-pinctrl.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx93-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx9-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale IMX93 IOMUX Controller
+title: Freescale IMX9 IOMUX Controller
 
 maintainers:
   - Peng Fan <peng.fan@nxp.com>
@@ -18,7 +18,9 @@ allOf:
 
 properties:
   compatible:
-    const: fsl,imx93-iomuxc
+    enum:
+      - fsl,imx91-iomuxc
+      - fsl,imx93-iomuxc
 
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml
new file mode 100644
index 00000000000..763a49bd07d
--- /dev/null
+++ b/dts/upstream/Bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,ma35d1-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 pin control and GPIO
+
+maintainers:
+  - Shan-Chun Hung <schung@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,ma35d1-pinctrl
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  nuvoton,sys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the system-management node.
+
+  ranges: true
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    type: object
+    properties:
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 2
+
+      interrupts:
+        description:
+          The interrupt outputs to sysirq.
+        maxItems: 1
+
+    required:
+      - gpio-controller
+      - '#gpio-cells'
+      - reg
+      - clocks
+      - interrupt-controller
+      - '#interrupt-cells'
+      - interrupts
+
+    additionalProperties: false
+
+  "-grp$":
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    patternProperties:
+      "-pins$":
+        type: object
+        description:
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          nuvoton,pins:
+            description:
+              Each entry consists of 4 parameters and represents the mux and config
+              setting for one pin.
+            $ref: /schemas/types.yaml#/definitions/uint32-matrix
+            minItems: 1
+            items:
+              items:
+                - minimum: 0
+                  maximum: 13
+                  description:
+                    Pin bank.
+                - minimum: 0
+                  maximum: 15
+                  description:
+                    Pin bank index.
+                - minimum: 0
+                  maximum: 15
+                  description:
+                    Mux 0 means GPIO and mux 1 to 15 means the specific device function.
+
+          power-source:
+            description: |
+              Valid arguments are described as below:
+              0: power supply of 1.8V
+              1: power supply of 3.3V
+            enum: [0, 1]
+
+          drive-strength-microamp:
+            oneOf:
+              - enum: [ 2900, 4400, 5800, 7300, 8600, 10100, 11500, 13000 ]
+                description: 1.8V I/O driving strength
+              - enum: [ 17100, 25600, 34100, 42800, 48000, 56000, 77000, 82000 ]
+                description: 3.3V I/O driving strength
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-schmitt-disable: true
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - nuvoton,sys
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+
+    pinctrl@40040000 {
+        compatible = "nuvoton,ma35d1-pinctrl";
+        reg = <0x40040000 0xc00>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        nuvoton,sys = <&sys>;
+        ranges = <0x0 0x40040000 0x400>;
+
+        gpio@0 {
+            reg = <0x0 0x40>;
+            interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk GPA_GATE>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        uart-grp {
+            uart11-pins {
+                nuvoton,pins = <11 0 2>,
+                               <11 1 2>,
+                               <11 2 2>,
+                               <11 3 2>;
+                power-source = <1>;
+                bias-disable;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
index b55d9c31665..814b9598edd 100644
--- a/dts/upstream/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
+++ b/dts/upstream/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
@@ -85,11 +85,12 @@ patternProperties:
                   smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
                   sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
                   mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
-                  scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1,
-                  spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den,
-                  smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix,
-                  spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
-                  hgpio5, hgpio6, hgpio7 ]
+                  scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
+                  smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
+                  spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
+                  wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
+                  hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
+                  bu4b, bu5, bu5b, bu6, gpo187 ]
 
       function:
         description:
@@ -109,11 +110,12 @@ patternProperties:
                 smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
                 sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
                 mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
-                scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1,
-                spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den,
-                smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix,
-                spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
-                hgpio5, hgpio6, hgpio7 ]
+                scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c,
+                smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2,
+                spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio,
+                wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0,
+                hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4,
+                bu4b, bu5, bu5b, bu6, gpo187 ]
 
     dependencies:
       groups: [ function ]
diff --git a/dts/upstream/Bindings/pinctrl/pinctrl-single.yaml b/dts/upstream/Bindings/pinctrl/pinctrl-single.yaml
index c11495524dd..e02595316c9 100644
--- a/dts/upstream/Bindings/pinctrl/pinctrl-single.yaml
+++ b/dts/upstream/Bindings/pinctrl/pinctrl-single.yaml
@@ -75,11 +75,11 @@ properties:
     description: Optional list of pin base, nr pins & gpio function
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      - items:
-          - description: phandle of a gpio-range node
-          - description: pin base
-          - description: number of pins
-          - description: gpio function
+      items:
+        - description: phandle of a gpio-range node
+        - description: pin base
+        - description: number of pins
+        - description: gpio function
 
   '#gpio-range-cells':
     description: No longer needed, may exist in older files for gpio-ranges
@@ -144,6 +144,13 @@ patternProperties:
           - description: drive strength mask
 
       pinctrl-single,input-schmitt:
+        description: Optional schmitt strength configuration
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: schmitt strength current
+          - description: schmitt strength mask
+
+      pinctrl-single,input-schmitt-enable:
         description: Optional input schmitt configuration
         $ref: /schemas/types.yaml#/definitions/uint32-array
         items:
diff --git a/dts/upstream/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/dts/upstream/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml
index bd3cbb44c99..e75393b3d19 100644
--- a/dts/upstream/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml
+++ b/dts/upstream/Bindings/pinctrl/qcom,mdm9607-tlmm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. MDM9607 TLMM block
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description:
   Top Level Mode Multiplexer pin controller in Qualcomm MDM9607 SoC.
diff --git a/dts/upstream/Bindings/pinctrl/qcom,pmic-gpio.yaml b/dts/upstream/Bindings/pinctrl/qcom,pmic-gpio.yaml
index 0bf2d9f093b..2784d32fdde 100644
--- a/dts/upstream/Bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/dts/upstream/Bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -56,6 +56,7 @@ properties:
           - qcom,pma8084-gpio
           - qcom,pmc8180-gpio
           - qcom,pmc8180c-gpio
+          - qcom,pmc8380-gpio
           - qcom,pmd8028-gpio
           - qcom,pmi632-gpio
           - qcom,pmi8950-gpio
@@ -223,6 +224,7 @@ allOf:
               - qcom,pm8150-gpio
               - qcom,pm8350-gpio
               - qcom,pmc8180-gpio
+              - qcom,pmc8380-gpio
               - qcom,pmi8994-gpio
               - qcom,pmm8155au-gpio
     then:
diff --git a/dts/upstream/Bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml
new file mode 100644
index 00000000000..9612e21183f
--- /dev/null
+++ b/dts/upstream/Bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM4250 SoC LPASS LPI TLMM
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM4250 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm4250-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI MCC registers
+
+  clocks:
+    items:
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: audio
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm4250-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm4250-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm4250-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-9]|2[0-6])$"
+
+      function:
+        enum: [ gpio, dmic01_clk, dmic01_data, dmic23_clk, dmic23_data,
+                dmic4_clk, dmic4_data, ext_mclk0_a, ext_mclk0_b, ext_mclk1_a,
+                ext_mclk1_b, ext_mclk1_c, i2s1_clk, i2s1_data, i2s1_ws,
+                i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws,
+                qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, slim_clk, slim_data,
+                swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, swr_wsa_clk,
+                swr_wsa_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+allOf:
+  - $ref: qcom,lpass-lpi-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    lpi_tlmm: pinctrl@a7c0000 {
+        compatible = "qcom,sm4250-lpass-lpi-pinctrl";
+        reg = <0xa7c0000 0x20000>,
+              <0xa950000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 19>;
+
+        i2s2-active-state {
+            clk-pins {
+                pins = "gpio10";
+                function = "i2s2_clk";
+                drive-strength = <2>;
+                slew-rate = <1>;
+                bias-disable;
+            };
+
+            data-pins {
+                pins = "gpio12";
+                function = "i2s2_data";
+                drive-strength = <2>;
+                slew-rate = <1>;
+            };
+        };
+
+        i2s2-sleep-clk-state {
+            pins = "gpio10";
+            function = "i2s2_clk";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+    };
diff --git a/dts/upstream/Bindings/pinctrl/qcom,sm6350-tlmm.yaml b/dts/upstream/Bindings/pinctrl/qcom,sm6350-tlmm.yaml
index a4771f87d93..b262af6be97 100644
--- a/dts/upstream/Bindings/pinctrl/qcom,sm6350-tlmm.yaml
+++ b/dts/upstream/Bindings/pinctrl/qcom,sm6350-tlmm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. SM6350 TLMM block
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description:
   Top Level Mode Multiplexer pin controller in Qualcomm SM6350 SoC.
diff --git a/dts/upstream/Bindings/pinctrl/qcom,sm6375-tlmm.yaml b/dts/upstream/Bindings/pinctrl/qcom,sm6375-tlmm.yaml
index 047f82863f9..c11af09c3f5 100644
--- a/dts/upstream/Bindings/pinctrl/qcom,sm6375-tlmm.yaml
+++ b/dts/upstream/Bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. SM6375 TLMM block
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@somainline.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description:
   Top Level Mode Multiplexer pin controller in Qualcomm SM6375 SoC.
diff --git a/dts/upstream/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index 4d5a957fa23..56d90c8e1fa 100644
--- a/dts/upstream/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/dts/upstream/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -26,6 +26,7 @@ properties:
               - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
               - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
               - renesas,r9a08g045-pinctrl # RZ/G3S
+              - renesas,r9a09g057-pinctrl # RZ/V2H(P)
 
       - items:
           - enum:
@@ -66,10 +67,14 @@ properties:
     maxItems: 1
 
   resets:
-    items:
-      - description: GPIO_RSTN signal
-      - description: GPIO_PORT_RESETN signal
-      - description: GPIO_SPARE_RESETN signal
+    oneOf:
+      - items:
+          - description: GPIO_RSTN signal
+          - description: GPIO_PORT_RESETN signal
+          - description: GPIO_SPARE_RESETN signal
+      - items:
+          - description: PFC main reset
+          - description: Reset for the control register related to WDTUDFCA and WDTUDFFCM pins
 
 additionalProperties:
   anyOf:
@@ -79,21 +84,6 @@ additionalProperties:
         - $ref: pincfg-node.yaml#
         - $ref: pinmux-node.yaml#
 
-        - if:
-            properties:
-              compatible:
-                contains:
-                  enum:
-                    - renesas,r9a08g045-pinctrl
-          then:
-            properties:
-              drive-strength: false
-              output-impedance-ohms: false
-              slew-rate: false
-          else:
-            properties:
-              drive-strength-microamp: false
-
       description:
         Pin controller client devices use pin configuration subnodes (children
         and grandchildren) for desired pin configuration.
@@ -126,6 +116,16 @@ additionalProperties:
         output-high: true
         output-low: true
         line-name: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        renesas,output-impedance:
+          description:
+            Output impedance for pins on the RZ/V2H(P) SoC. The value provided by this
+            property corresponds to register bit values that can be set in the PFC_IOLH_mn
+            register, which adjusts the drive strength value and is pin-dependent.
+          $ref: /schemas/types.yaml#/definitions/uint32
+          enum: [0, 1, 2, 3]
 
     - type: object
       additionalProperties:
@@ -134,6 +134,20 @@ additionalProperties:
 allOf:
   - $ref: pinctrl.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g057-pinctrl
+    then:
+      properties:
+        resets:
+          maxItems: 2
+    else:
+      properties:
+        resets:
+          minItems: 3
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/dts/upstream/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
index f13d315b5d5..ce66fd15ff9 100644
--- a/dts/upstream/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ b/dts/upstream/Bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -42,179 +42,187 @@ patternProperties:
         $ref: pinmux-node.yaml#
 
         properties:
+          pins:
+            description:
+              List of pins to select (either this or "groups" must be specified)
+            items:
+              pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$'
+
           groups:
             description:
               List of groups to select (either this or "pins" must be
               specified), available groups for this subnode.
             items:
-              enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp,
-                     ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp,
-                     gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp,
-                     mdio1_1_grp, mdio2_0_grp, mdio3_0_grp,
-                     qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp,
-                     spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp,
-                     spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp,
-                     spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp,
-                     spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp,
-                     spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp,
-                     spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp,
-                     spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp,
-                     spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp,
-                     spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp,
-                     spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp,
-                     spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp,
-                     spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp,
-                     spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp,
-                     spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp,
-                     spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp,
-                     spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp,
-                     sdio0_0_grp, sdio0_1_grp, sdio0_2_grp,
-                     sdio0_3_grp, sdio0_4_grp, sdio0_5_grp,
-                     sdio0_6_grp, sdio0_7_grp, sdio0_8_grp,
-                     sdio0_9_grp, sdio0_10_grp, sdio0_11_grp,
-                     sdio0_12_grp, sdio0_13_grp, sdio0_14_grp,
-                     sdio0_15_grp, sdio0_16_grp, sdio0_17_grp,
-                     sdio0_18_grp, sdio0_19_grp, sdio0_20_grp,
-                     sdio0_21_grp, sdio0_22_grp, sdio0_23_grp,
-                     sdio0_24_grp, sdio0_25_grp, sdio0_26_grp,
-                     sdio0_27_grp, sdio0_28_grp, sdio0_29_grp,
-                     sdio0_30_grp, sdio0_31_grp, sdio0_32_grp,
-                     sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp,
-                     sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp,
-                     sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp,
-                     sdio1_0_grp, sdio1_1_grp, sdio1_2_grp,
-                     sdio1_3_grp, sdio1_4_grp, sdio1_5_grp,
-                     sdio1_6_grp, sdio1_7_grp, sdio1_8_grp,
-                     sdio1_9_grp, sdio1_10_grp, sdio1_11_grp,
-                     sdio1_12_grp, sdio1_13_grp, sdio1_14_grp,
-                     sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp,
-                     sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp,
-                     sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp,
-                     nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp,
-                     nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp,
-                     can0_1_grp, can0_2_grp, can0_3_grp,
-                     can0_4_grp, can0_5_grp, can0_6_grp,
-                     can0_7_grp, can0_8_grp, can0_9_grp,
-                     can0_10_grp, can0_11_grp, can0_12_grp,
-                     can0_13_grp, can0_14_grp, can0_15_grp,
-                     can0_16_grp, can0_17_grp, can0_18_grp,
-                     can1_0_grp, can1_1_grp, can1_2_grp,
-                     can1_3_grp, can1_4_grp, can1_5_grp,
-                     can1_6_grp, can1_7_grp, can1_8_grp,
-                     can1_9_grp, can1_10_grp, can1_11_grp,
-                     can1_12_grp, can1_13_grp, can1_14_grp,
-                     can1_15_grp, can1_16_grp, can1_17_grp,
-                     can1_18_grp, can1_19_grp, uart0_0_grp,
-                     uart0_1_grp, uart0_2_grp, uart0_3_grp,
-                     uart0_4_grp, uart0_5_grp, uart0_6_grp,
-                     uart0_7_grp, uart0_8_grp, uart0_9_grp,
-                     uart0_10_grp, uart0_11_grp, uart0_12_grp,
-                     uart0_13_grp, uart0_14_grp, uart0_15_grp,
-                     uart0_16_grp, uart0_17_grp, uart0_18_grp,
-                     uart1_0_grp, uart1_1_grp, uart1_2_grp,
-                     uart1_3_grp, uart1_4_grp, uart1_5_grp,
-                     uart1_6_grp, uart1_7_grp, uart1_8_grp,
-                     uart1_9_grp, uart1_10_grp, uart1_11_grp,
-                     uart1_12_grp, uart1_13_grp, uart1_14_grp,
-                     uart1_15_grp, uart1_16_grp, uart1_17_grp,
-                     uart1_18_grp, i2c0_0_grp, i2c0_1_grp,
-                     i2c0_2_grp, i2c0_3_grp, i2c0_4_grp,
-                     i2c0_5_grp, i2c0_6_grp, i2c0_7_grp,
-                     i2c0_8_grp, i2c0_9_grp, i2c0_10_grp,
-                     i2c0_11_grp, i2c0_12_grp, i2c0_13_grp,
-                     i2c0_14_grp, i2c0_15_grp, i2c0_16_grp,
-                     i2c0_17_grp, i2c0_18_grp, i2c1_0_grp,
-                     i2c1_1_grp, i2c1_2_grp, i2c1_3_grp,
-                     i2c1_4_grp, i2c1_5_grp, i2c1_6_grp,
-                     i2c1_7_grp, i2c1_8_grp, i2c1_9_grp,
-                     i2c1_10_grp, i2c1_11_grp, i2c1_12_grp,
-                     i2c1_13_grp, i2c1_14_grp, i2c1_15_grp,
-                     i2c1_16_grp, i2c1_17_grp, i2c1_18_grp,
-                     i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp,
-                     ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp,
-                     ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp,
-                     ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp,
-                     ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp,
-                     ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp,
-                     ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp,
-                     ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp,
-                     ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp,
-                     ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp,
-                     ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp,
-                     ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp,
-                     ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp,
-                     ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp,
-                     ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp,
-                     ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp,
-                     ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp,
-                     ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp,
-                     ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp,
-                     ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp,
-                     ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp,
-                     ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp,
-                     ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp,
-                     ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp,
-                     ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp,
-                     swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp,
-                     swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp,
-                     swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp,
-                     swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp,
-                     swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp,
-                     swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp,
-                     swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp,
-                     swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp,
-                     swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp,
-                     swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp,
-                     swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp,
-                     swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp,
-                     swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp,
-                     swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp,
-                     swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp,
-                     swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp,
-                     swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp,
-                     gpio0_1_grp, gpio0_2_grp, gpio0_3_grp,
-                     gpio0_4_grp, gpio0_5_grp, gpio0_6_grp,
-                     gpio0_7_grp, gpio0_8_grp, gpio0_9_grp,
-                     gpio0_10_grp, gpio0_11_grp, gpio0_12_grp,
-                     gpio0_13_grp, gpio0_14_grp, gpio0_15_grp,
-                     gpio0_16_grp, gpio0_17_grp, gpio0_18_grp,
-                     gpio0_19_grp, gpio0_20_grp, gpio0_21_grp,
-                     gpio0_22_grp, gpio0_23_grp, gpio0_24_grp,
-                     gpio0_25_grp, gpio0_26_grp, gpio0_27_grp,
-                     gpio0_28_grp, gpio0_29_grp, gpio0_30_grp,
-                     gpio0_31_grp, gpio0_32_grp, gpio0_33_grp,
-                     gpio0_34_grp, gpio0_35_grp, gpio0_36_grp,
-                     gpio0_37_grp, gpio0_38_grp, gpio0_39_grp,
-                     gpio0_40_grp, gpio0_41_grp, gpio0_42_grp,
-                     gpio0_43_grp, gpio0_44_grp, gpio0_45_grp,
-                     gpio0_46_grp, gpio0_47_grp, gpio0_48_grp,
-                     gpio0_49_grp, gpio0_50_grp, gpio0_51_grp,
-                     gpio0_52_grp, gpio0_53_grp, gpio0_54_grp,
-                     gpio0_55_grp, gpio0_56_grp, gpio0_57_grp,
-                     gpio0_58_grp, gpio0_59_grp, gpio0_60_grp,
-                     gpio0_61_grp, gpio0_62_grp, gpio0_63_grp,
-                     gpio0_64_grp, gpio0_65_grp, gpio0_66_grp,
-                     gpio0_67_grp, gpio0_68_grp, gpio0_69_grp,
-                     gpio0_70_grp, gpio0_71_grp, gpio0_72_grp,
-                     gpio0_73_grp, gpio0_74_grp, gpio0_75_grp,
-                     gpio0_76_grp, gpio0_77_grp, usb0_0_grp,
-                     usb1_0_grp, pmu0_0_grp, pmu0_1_grp,
-                     pmu0_2_grp, pmu0_3_grp, pmu0_4_grp,
-                     pmu0_5_grp, pmu0_6_grp, pmu0_7_grp,
-                     pmu0_8_grp, pmu0_9_grp, pmu0_10_grp,
-                     pmu0_11_grp, pcie0_0_grp, pcie0_1_grp,
-                     pcie0_2_grp, pcie0_3_grp, pcie0_4_grp,
-                     pcie0_5_grp, pcie0_6_grp, pcie0_7_grp,
-                     csu0_0_grp, csu0_1_grp, csu0_2_grp,
-                     csu0_3_grp, csu0_4_grp, csu0_5_grp,
-                     csu0_6_grp, csu0_7_grp, csu0_8_grp,
-                     csu0_9_grp, csu0_10_grp, csu0_11_grp,
-                     dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp,
-                     dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp,
-                     pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp,
-                     pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp,
-                     trace0_1_grp, trace0_clk_1_grp, trace0_2_grp,
-                     trace0_clk_2_grp, testscan0_0_grp]
+              anyOf:
+                - pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$'
+                - enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp,
+                         ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp,
+                         gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp,
+                         mdio1_1_grp, mdio2_0_grp, mdio3_0_grp,
+                         qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp,
+                         spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp,
+                         spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp,
+                         spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp,
+                         spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp,
+                         spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp,
+                         spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp,
+                         spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp,
+                         spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp,
+                         spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp,
+                         spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp,
+                         spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp,
+                         spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp,
+                         spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp,
+                         spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp,
+                         spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp,
+                         spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp,
+                         sdio0_0_grp, sdio0_1_grp, sdio0_2_grp,
+                         sdio0_3_grp, sdio0_4_grp, sdio0_5_grp,
+                         sdio0_6_grp, sdio0_7_grp, sdio0_8_grp,
+                         sdio0_9_grp, sdio0_10_grp, sdio0_11_grp,
+                         sdio0_12_grp, sdio0_13_grp, sdio0_14_grp,
+                         sdio0_15_grp, sdio0_16_grp, sdio0_17_grp,
+                         sdio0_18_grp, sdio0_19_grp, sdio0_20_grp,
+                         sdio0_21_grp, sdio0_22_grp, sdio0_23_grp,
+                         sdio0_24_grp, sdio0_25_grp, sdio0_26_grp,
+                         sdio0_27_grp, sdio0_28_grp, sdio0_29_grp,
+                         sdio0_30_grp, sdio0_31_grp, sdio0_32_grp,
+                         sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp,
+                         sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp,
+                         sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp,
+                         sdio1_0_grp, sdio1_1_grp, sdio1_2_grp,
+                         sdio1_3_grp, sdio1_4_grp, sdio1_5_grp,
+                         sdio1_6_grp, sdio1_7_grp, sdio1_8_grp,
+                         sdio1_9_grp, sdio1_10_grp, sdio1_11_grp,
+                         sdio1_12_grp, sdio1_13_grp, sdio1_14_grp,
+                         sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp,
+                         sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp,
+                         sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp,
+                         nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp,
+                         nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp,
+                         can0_1_grp, can0_2_grp, can0_3_grp,
+                         can0_4_grp, can0_5_grp, can0_6_grp,
+                         can0_7_grp, can0_8_grp, can0_9_grp,
+                         can0_10_grp, can0_11_grp, can0_12_grp,
+                         can0_13_grp, can0_14_grp, can0_15_grp,
+                         can0_16_grp, can0_17_grp, can0_18_grp,
+                         can1_0_grp, can1_1_grp, can1_2_grp,
+                         can1_3_grp, can1_4_grp, can1_5_grp,
+                         can1_6_grp, can1_7_grp, can1_8_grp,
+                         can1_9_grp, can1_10_grp, can1_11_grp,
+                         can1_12_grp, can1_13_grp, can1_14_grp,
+                         can1_15_grp, can1_16_grp, can1_17_grp,
+                         can1_18_grp, can1_19_grp, uart0_0_grp,
+                         uart0_1_grp, uart0_2_grp, uart0_3_grp,
+                         uart0_4_grp, uart0_5_grp, uart0_6_grp,
+                         uart0_7_grp, uart0_8_grp, uart0_9_grp,
+                         uart0_10_grp, uart0_11_grp, uart0_12_grp,
+                         uart0_13_grp, uart0_14_grp, uart0_15_grp,
+                         uart0_16_grp, uart0_17_grp, uart0_18_grp,
+                         uart1_0_grp, uart1_1_grp, uart1_2_grp,
+                         uart1_3_grp, uart1_4_grp, uart1_5_grp,
+                         uart1_6_grp, uart1_7_grp, uart1_8_grp,
+                         uart1_9_grp, uart1_10_grp, uart1_11_grp,
+                         uart1_12_grp, uart1_13_grp, uart1_14_grp,
+                         uart1_15_grp, uart1_16_grp, uart1_17_grp,
+                         uart1_18_grp, i2c0_0_grp, i2c0_1_grp,
+                         i2c0_2_grp, i2c0_3_grp, i2c0_4_grp,
+                         i2c0_5_grp, i2c0_6_grp, i2c0_7_grp,
+                         i2c0_8_grp, i2c0_9_grp, i2c0_10_grp,
+                         i2c0_11_grp, i2c0_12_grp, i2c0_13_grp,
+                         i2c0_14_grp, i2c0_15_grp, i2c0_16_grp,
+                         i2c0_17_grp, i2c0_18_grp, i2c1_0_grp,
+                         i2c1_1_grp, i2c1_2_grp, i2c1_3_grp,
+                         i2c1_4_grp, i2c1_5_grp, i2c1_6_grp,
+                         i2c1_7_grp, i2c1_8_grp, i2c1_9_grp,
+                         i2c1_10_grp, i2c1_11_grp, i2c1_12_grp,
+                         i2c1_13_grp, i2c1_14_grp, i2c1_15_grp,
+                         i2c1_16_grp, i2c1_17_grp, i2c1_18_grp,
+                         i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp,
+                         ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp,
+                         ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp,
+                         ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp,
+                         ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp,
+                         ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp,
+                         ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp,
+                         ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp,
+                         ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp,
+                         ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp,
+                         ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp,
+                         ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp,
+                         ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp,
+                         ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp,
+                         ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp,
+                         ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp,
+                         ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp,
+                         ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp,
+                         ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp,
+                         ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp,
+                         ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp,
+                         ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp,
+                         ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp,
+                         ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp,
+                         ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp,
+                         swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp,
+                         swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp,
+                         swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp,
+                         swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp,
+                         swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp,
+                         swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp,
+                         swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp,
+                         swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp,
+                         swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp,
+                         swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp,
+                         swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp,
+                         swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp,
+                         swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp,
+                         swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp,
+                         swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp,
+                         swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp,
+                         swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp,
+                         gpio0_1_grp, gpio0_2_grp, gpio0_3_grp,
+                         gpio0_4_grp, gpio0_5_grp, gpio0_6_grp,
+                         gpio0_7_grp, gpio0_8_grp, gpio0_9_grp,
+                         gpio0_10_grp, gpio0_11_grp, gpio0_12_grp,
+                         gpio0_13_grp, gpio0_14_grp, gpio0_15_grp,
+                         gpio0_16_grp, gpio0_17_grp, gpio0_18_grp,
+                         gpio0_19_grp, gpio0_20_grp, gpio0_21_grp,
+                         gpio0_22_grp, gpio0_23_grp, gpio0_24_grp,
+                         gpio0_25_grp, gpio0_26_grp, gpio0_27_grp,
+                         gpio0_28_grp, gpio0_29_grp, gpio0_30_grp,
+                         gpio0_31_grp, gpio0_32_grp, gpio0_33_grp,
+                         gpio0_34_grp, gpio0_35_grp, gpio0_36_grp,
+                         gpio0_37_grp, gpio0_38_grp, gpio0_39_grp,
+                         gpio0_40_grp, gpio0_41_grp, gpio0_42_grp,
+                         gpio0_43_grp, gpio0_44_grp, gpio0_45_grp,
+                         gpio0_46_grp, gpio0_47_grp, gpio0_48_grp,
+                         gpio0_49_grp, gpio0_50_grp, gpio0_51_grp,
+                         gpio0_52_grp, gpio0_53_grp, gpio0_54_grp,
+                         gpio0_55_grp, gpio0_56_grp, gpio0_57_grp,
+                         gpio0_58_grp, gpio0_59_grp, gpio0_60_grp,
+                         gpio0_61_grp, gpio0_62_grp, gpio0_63_grp,
+                         gpio0_64_grp, gpio0_65_grp, gpio0_66_grp,
+                         gpio0_67_grp, gpio0_68_grp, gpio0_69_grp,
+                         gpio0_70_grp, gpio0_71_grp, gpio0_72_grp,
+                         gpio0_73_grp, gpio0_74_grp, gpio0_75_grp,
+                         gpio0_76_grp, gpio0_77_grp, usb0_0_grp,
+                         usb1_0_grp, pmu0_0_grp, pmu0_1_grp,
+                         pmu0_2_grp, pmu0_3_grp, pmu0_4_grp,
+                         pmu0_5_grp, pmu0_6_grp, pmu0_7_grp,
+                         pmu0_8_grp, pmu0_9_grp, pmu0_10_grp,
+                         pmu0_11_grp, pcie0_0_grp, pcie0_1_grp,
+                         pcie0_2_grp, pcie0_3_grp, pcie0_4_grp,
+                         pcie0_5_grp, pcie0_6_grp, pcie0_7_grp,
+                         csu0_0_grp, csu0_1_grp, csu0_2_grp,
+                         csu0_3_grp, csu0_4_grp, csu0_5_grp,
+                         csu0_6_grp, csu0_7_grp, csu0_8_grp,
+                         csu0_9_grp, csu0_10_grp, csu0_11_grp,
+                         dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp,
+                         dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp,
+                         pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp,
+                         pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp,
+                         trace0_1_grp, trace0_clk_1_grp, trace0_2_grp,
+                         trace0_clk_2_grp, testscan0_0_grp]
             maxItems: 78
 
           function:
@@ -230,9 +238,12 @@ patternProperties:
                    pcie0, csu0, dpaux0, pjtag0, trace0, trace0_clk, testscan0]
 
         required:
-          - groups
           - function
 
+        oneOf:
+          - required: [ groups ]
+          - required: [ pins ]
+
         additionalProperties: false
 
       '^conf':
diff --git a/dts/upstream/Bindings/platform/lenovo,yoga-c630-ec.yaml b/dts/upstream/Bindings/platform/lenovo,yoga-c630-ec.yaml
new file mode 100644
index 00000000000..3180ce1a22d
--- /dev/null
+++ b/dts/upstream/Bindings/platform/lenovo,yoga-c630-ec.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/platform/lenovo,yoga-c630-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lenovo Yoga C630 Embedded Controller.
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The Qualcomm Snapdragon-based Lenovo Yoga C630 has an Embedded Controller
+  (EC) which handles things such as battery and USB Type-C. This binding
+  describes the interface, on an I2C bus, to this EC.
+
+properties:
+  compatible:
+    const: lenovo,yoga-c630-ec
+
+  reg:
+    const: 0x70
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+patternProperties:
+  '^connector@[01]$':
+    $ref: /schemas/connector/usb-connector.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c1 {
+        clock-frequency = <400000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        embedded-controller@70 {
+            compatible = "lenovo,yoga-c630-ec";
+            reg = <0x70>;
+
+            interrupts-extended = <&tlmm 20 IRQ_TYPE_LEVEL_HIGH>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            connector@0 {
+                compatible = "usb-c-connector";
+                reg = <0>;
+                power-role = "source";
+                data-role = "host";
+            };
+
+            connector@1 {
+                compatible = "usb-c-connector";
+                reg = <1>;
+                power-role = "source";
+                data-role = "host";
+            };
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/power/amlogic,meson-sec-pwrc.yaml b/dts/upstream/Bindings/power/amlogic,meson-sec-pwrc.yaml
index dab3d92bc27..15d74138baa 100644
--- a/dts/upstream/Bindings/power/amlogic,meson-sec-pwrc.yaml
+++ b/dts/upstream/Bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -20,6 +20,8 @@ properties:
     enum:
       - amlogic,meson-a1-pwrc
       - amlogic,meson-s4-pwrc
+      - amlogic,a4-pwrc
+      - amlogic,a5-pwrc
       - amlogic,c3-pwrc
       - amlogic,t7-pwrc
 
diff --git a/dts/upstream/Bindings/power/supply/maxim,max17201.yaml b/dts/upstream/Bindings/power/supply/maxim,max17201.yaml
new file mode 100644
index 00000000000..fe3dd9bd558
--- /dev/null
+++ b/dts/upstream/Bindings/power/supply/maxim,max17201.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX17201 fuel gauge
+
+maintainers:
+  - Dimitri Fedrau <dima.fedrau@gmail.com>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: maxim,max17201
+      - items:
+          - enum:
+              - maxim,max17205
+          - const: maxim,max17201
+
+  reg:
+    items:
+      - description: ModelGauge m5 registers
+      - description: Nonvolatile registers
+
+  reg-names:
+    items:
+      - const: m5
+      - const: nvmem
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      fuel-gauge@36 {
+        compatible = "maxim,max17201";
+        reg = <0x36>, <0xb>;
+        reg-names = "m5", "nvmem";
+        interrupt-parent = <&gpio0>;
+        interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+      };
+    };
diff --git a/dts/upstream/Bindings/ptp/fsl,ptp.yaml b/dts/upstream/Bindings/ptp/fsl,ptp.yaml
new file mode 100644
index 00000000000..3bb8615e3e9
--- /dev/null
+++ b/dts/upstream/Bindings/ptp/fsl,ptp.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/fsl,ptp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QorIQ 1588 timer based PTP clock
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,etsec-ptp
+      - fsl,fman-ptp-timer
+      - fsl,dpaa2-ptp
+      - fsl,enetc-ptp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  fsl,cksel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Timer reference clock source.
+
+      Reference clock source is determined by the value, which is holded
+      in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+      value, which will be directly written in those bits, that is why,
+      according to reference manual, the next clock sources can be used:
+
+      For eTSEC,
+      <0> - external high precision timer reference clock (TSEC_TMR_CLK
+            input is used for this purpose);
+      <1> - eTSEC system clock;
+      <2> - eTSEC1 transmit clock;
+      <3> - RTC clock input.
+
+      For DPAA FMan,
+      <0> - external high precision timer reference clock (TMR_1588_CLK)
+      <1> - MAC system clock (1/2 FMan clock)
+      <2> - reserved
+      <3> - RTC clock oscillator
+
+  fsl,tclk-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Timer reference clock period in nanoseconds.
+
+  fsl,tmr-prsc:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Prescaler, divides the output clock.
+
+  fsl,tmr-add:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Frequency compensation value.
+
+  fsl,tmr-fiper1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed interval period pulse generator.
+
+  fsl,tmr-fiper2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed interval period pulse generator.
+
+  fsl,tmr-fiper3:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Fixed interval period pulse generator.
+      Supported only on DPAA2 and ENETC hardware.
+
+  fsl,max-adj:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum frequency adjustment in parts per billion.
+
+      These properties set the operational parameters for the PTP
+      clock. You must choose these carefully for the clock to work right.
+      Here is how to figure good values:
+
+      TimerOsc     = selected reference clock   MHz
+      tclk_period  = desired clock period       nanoseconds
+      NominalFreq  = 1000 / tclk_period         MHz
+      FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
+      tmr_add      = ceil(2^32 / FreqDivRatio)
+      OutputClock  = NominalFreq / tmr_prsc     MHz
+      PulseWidth   = 1 / OutputClock            microseconds
+      FiperFreq1   = desired frequency in Hz
+      FiperDiv1    = 1000000 * OutputClock / FiperFreq1
+      tmr_fiper1   = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
+      max_adj      = 1000000000 * (FreqDivRatio - 1.0) - 1
+
+      The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
+      driver expects that tmr_fiper1 will be correctly set to produce a 1
+      Pulse Per Second (PPS) signal, since this will be offered to the PPS
+      subsystem to synchronize the Linux clock.
+
+      When this attribute is not used, the IEEE 1588 timer reference clock
+      will use the eTSEC system clock (for Gianfar) or the MAC system
+      clock (for DPAA).
+
+  fsl,extts-fifo:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates hardware
+      support for the external trigger stamp FIFO
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates the 1588 timer
+      support for the external trigger stamp FIFO.
+      IP block is little-endian mode. The default endian mode
+      is big-endian.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    phc@24e00 {
+        compatible = "fsl,etsec-ptp";
+        reg = <0x24e00 0xb0>;
+        interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-parent = <&ipic>;
+        fsl,cksel       = <1>;
+        fsl,tclk-period = <10>;
+        fsl,tmr-prsc    = <100>;
+        fsl,tmr-add     = <0x999999a4>;
+        fsl,tmr-fiper1  = <0x3b9ac9f6>;
+        fsl,tmr-fiper2  = <0x00018696>;
+        fsl,max-adj     = <659999998>;
+    };
diff --git a/dts/upstream/Bindings/ptp/ptp-qoriq.txt b/dts/upstream/Bindings/ptp/ptp-qoriq.txt
deleted file mode 100644
index 743eda754e6..00000000000
--- a/dts/upstream/Bindings/ptp/ptp-qoriq.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-* Freescale QorIQ 1588 timer based PTP clock
-
-General Properties:
-
-  - compatible   Should be "fsl,etsec-ptp" for eTSEC
-                 Should be "fsl,fman-ptp-timer" for DPAA FMan
-                 Should be "fsl,dpaa2-ptp" for DPAA2
-                 Should be "fsl,enetc-ptp" for ENETC
-  - reg          Offset and length of the register set for the device
-  - interrupts   There should be at least two interrupts. Some devices
-                 have as many as four PTP related interrupts.
-
-Clock Properties:
-
-  - fsl,cksel        Timer reference clock source.
-  - fsl,tclk-period  Timer reference clock period in nanoseconds.
-  - fsl,tmr-prsc     Prescaler, divides the output clock.
-  - fsl,tmr-add      Frequency compensation value.
-  - fsl,tmr-fiper1   Fixed interval period pulse generator.
-  - fsl,tmr-fiper2   Fixed interval period pulse generator.
-  - fsl,tmr-fiper3   Fixed interval period pulse generator.
-                     Supported only on DPAA2 and ENETC hardware.
-  - fsl,max-adj      Maximum frequency adjustment in parts per billion.
-  - fsl,extts-fifo   The presence of this property indicates hardware
-		     support for the external trigger stamp FIFO.
-  - little-endian    The presence of this property indicates the 1588 timer
-		     IP block is little-endian mode. The default endian mode
-		     is big-endian.
-
-  These properties set the operational parameters for the PTP
-  clock. You must choose these carefully for the clock to work right.
-  Here is how to figure good values:
-
-  TimerOsc     = selected reference clock   MHz
-  tclk_period  = desired clock period       nanoseconds
-  NominalFreq  = 1000 / tclk_period         MHz
-  FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
-  tmr_add      = ceil(2^32 / FreqDivRatio)
-  OutputClock  = NominalFreq / tmr_prsc     MHz
-  PulseWidth   = 1 / OutputClock            microseconds
-  FiperFreq1   = desired frequency in Hz
-  FiperDiv1    = 1000000 * OutputClock / FiperFreq1
-  tmr_fiper1   = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
-  max_adj      = 1000000000 * (FreqDivRatio - 1.0) - 1
-
-  The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
-  driver expects that tmr_fiper1 will be correctly set to produce a 1
-  Pulse Per Second (PPS) signal, since this will be offered to the PPS
-  subsystem to synchronize the Linux clock.
-
-  Reference clock source is determined by the value, which is holded
-  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
-  value, which will be directly written in those bits, that is why,
-  according to reference manual, the next clock sources can be used:
-
-  For eTSEC,
-  <0> - external high precision timer reference clock (TSEC_TMR_CLK
-        input is used for this purpose);
-  <1> - eTSEC system clock;
-  <2> - eTSEC1 transmit clock;
-  <3> - RTC clock input.
-
-  For DPAA FMan,
-  <0> - external high precision timer reference clock (TMR_1588_CLK)
-  <1> - MAC system clock (1/2 FMan clock)
-  <2> - reserved
-  <3> - RTC clock oscillator
-
-  When this attribute is not used, the IEEE 1588 timer reference clock
-  will use the eTSEC system clock (for Gianfar) or the MAC system
-  clock (for DPAA).
-
-Example:
-
-	ptp_clock@24e00 {
-		compatible = "fsl,etsec-ptp";
-		reg = <0x24E00 0xB0>;
-		interrupts = <12 0x8 13 0x8>;
-		interrupt-parent = < &ipic >;
-		fsl,cksel       = <1>;
-		fsl,tclk-period = <10>;
-		fsl,tmr-prsc    = <100>;
-		fsl,tmr-add     = <0x999999A4>;
-		fsl,tmr-fiper1  = <0x3B9AC9F6>;
-		fsl,tmr-fiper2  = <0x00018696>;
-		fsl,max-adj     = <659999998>;
-	};
diff --git a/dts/upstream/Bindings/pwm/adi,axi-pwmgen.yaml b/dts/upstream/Bindings/pwm/adi,axi-pwmgen.yaml
new file mode 100644
index 00000000000..ec6115d3796
--- /dev/null
+++ b/dts/upstream/Bindings/pwm/adi,axi-pwmgen.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/adi,axi-pwmgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI PWM generator
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description:
+  The Analog Devices AXI PWM generator can generate PWM signals
+  with variable pulse width and period.
+
+  https://wiki.analog.com/resources/fpga/docs/axi_pwm_gen
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: adi,axi-pwmgen-2.00.a
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+required:
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwm@44b00000 {
+       compatible = "adi,axi-pwmgen-2.00.a";
+       reg = <0x44b00000 0x1000>;
+       clocks = <&spi_clk>;
+       #pwm-cells = <2>;
+    };
diff --git a/dts/upstream/Bindings/pwm/atmel,at91sam-pwm.yaml b/dts/upstream/Bindings/pwm/atmel,at91sam-pwm.yaml
index 96cd6f3c354..d20ad27657a 100644
--- a/dts/upstream/Bindings/pwm/atmel,at91sam-pwm.yaml
+++ b/dts/upstream/Bindings/pwm/atmel,at91sam-pwm.yaml
@@ -23,7 +23,9 @@ properties:
               - atmel,sama5d2-pwm
               - microchip,sam9x60-pwm
       - items:
-          - const: microchip,sama7g5-pwm
+          - enum:
+              - microchip,sama7d65-pwm
+              - microchip,sama7g5-pwm
           - const: atmel,sama5d2-pwm
       - items:
           - const: microchip,sam9x7-pwm
diff --git a/dts/upstream/Bindings/pwm/fsl,vf610-ftm-pwm.yaml b/dts/upstream/Bindings/pwm/fsl,vf610-ftm-pwm.yaml
new file mode 100644
index 00000000000..7f9f72d95e7
--- /dev/null
+++ b/dts/upstream/Bindings/pwm/fsl,vf610-ftm-pwm.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/fsl,vf610-ftm-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale FlexTimer Module (FTM) PWM controller
+
+description: |
+  The same FTM PWM device can have a different endianness on different SoCs. The
+  device tree provides a property to describing this so that an operating system
+  device driver can handle all variants of the device. Refer to the table below
+  for the endianness of the FTM PWM block as integrated into the existing SoCs:
+
+  SoC     | FTM-PWM endianness
+  --------+-------------------
+  Vybrid  | LE
+  LS1     | BE
+  LS2     | LE
+
+  Please see ../regmap/regmap.txt for more detail about how to specify endian
+  modes in device tree.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,vf610-ftm-pwm
+      - fsl,imx8qm-ftm-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: ftm_sys
+      - const: ftm_ext
+      - const: ftm_fix
+      - const: ftm_cnt_clk_en
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Boolean property, required if the FTM PWM registers use a big-
+      endian rather than little-endian layout.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: pwm.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    pwm@40038000 {
+        compatible = "fsl,vf610-ftm-pwm";
+        reg = <0x40038000 0x1000>;
+        #pwm-cells = <3>;
+        clocks = <&clks VF610_CLK_FTM0>,
+                 <&clks VF610_CLK_FTM0_EXT_SEL>,
+                 <&clks VF610_CLK_FTM0_FIX_SEL>,
+                 <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+        clock-names = "ftm_sys", "ftm_ext", "ftm_fix", "ftm_cnt_clk_en";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pwm0_1>;
+        big-endian;
+    };
diff --git a/dts/upstream/Bindings/pwm/imx-pwm.yaml b/dts/upstream/Bindings/pwm/imx-pwm.yaml
index a84a240a61d..04148198e34 100644
--- a/dts/upstream/Bindings/pwm/imx-pwm.yaml
+++ b/dts/upstream/Bindings/pwm/imx-pwm.yaml
@@ -68,7 +68,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - interrupts
 
 additionalProperties: false
 
diff --git a/dts/upstream/Bindings/pwm/imx-tpm-pwm.yaml b/dts/upstream/Bindings/pwm/imx-tpm-pwm.yaml
index 8bef9dfeba9..ac0a35bf864 100644
--- a/dts/upstream/Bindings/pwm/imx-tpm-pwm.yaml
+++ b/dts/upstream/Bindings/pwm/imx-tpm-pwm.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX TPM PWM controller
 
 maintainers:
-  - Anson Huang <anson.huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 description: |
   The TPM counter and period counter are shared between multiple
diff --git a/dts/upstream/Bindings/pwm/mxs-pwm.yaml b/dts/upstream/Bindings/pwm/mxs-pwm.yaml
index 8f50e23ca8c..a9d3a41ac5b 100644
--- a/dts/upstream/Bindings/pwm/mxs-pwm.yaml
+++ b/dts/upstream/Bindings/pwm/mxs-pwm.yaml
@@ -8,7 +8,6 @@ title: Freescale MXS PWM controller
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Anson Huang <anson.huang@nxp.com>
 
 allOf:
   - $ref: pwm.yaml#
diff --git a/dts/upstream/Bindings/pwm/pwm-fsl-ftm.txt b/dts/upstream/Bindings/pwm/pwm-fsl-ftm.txt
deleted file mode 100644
index 36532cd5ab2..00000000000
--- a/dts/upstream/Bindings/pwm/pwm-fsl-ftm.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Freescale FlexTimer Module (FTM) PWM controller
-
-The same FTM PWM device can have a different endianness on different SoCs. The
-device tree provides a property to describing this so that an operating system
-device driver can handle all variants of the device. Refer to the table below
-for the endianness of the FTM PWM block as integrated into the existing SoCs:
-
-	SoC     | FTM-PWM endianness
-	--------+-------------------
-	Vybrid  | LE
-	LS1     | BE
-	LS2     | LE
-
-Please see ../regmap/regmap.txt for more detail about how to specify endian
-modes in device tree.
-
-
-Required properties:
-- compatible : should be "fsl,<soc>-ftm-pwm" and one of the following
-   compatible strings:
-  - "fsl,vf610-ftm-pwm" for PWM compatible with the one integrated on VF610
-  - "fsl,imx8qm-ftm-pwm" for PWM compatible with the one integrated on i.MX8QM
-- reg: Physical base address and length of the controller's registers
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
-  the cells format.
-- clock-names: Should include the following module clock source entries:
-    "ftm_sys" (module clock, also can be used as counter clock),
-    "ftm_ext" (external counter clock),
-    "ftm_fix" (fixed counter clock),
-    "ftm_cnt_clk_en" (external and fixed counter clock enable/disable).
-- clocks: Must contain a phandle and clock specifier for each entry in
-  clock-names, please see clock/clock-bindings.txt for details of the property
-  values.
-- pinctrl-names: Must contain a "default" entry.
-- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
-  See pinctrl/pinctrl-bindings.txt for details of the property values.
-- big-endian: Boolean property, required if the FTM PWM registers use a big-
-  endian rather than little-endian layout.
-
-Example:
-
-pwm0: pwm@40038000 {
-		compatible = "fsl,vf610-ftm-pwm";
-		reg = <0x40038000 0x1000>;
-		#pwm-cells = <3>;
-		clock-names = "ftm_sys", "ftm_ext",
-				"ftm_fix", "ftm_cnt_clk_en";
-		clocks = <&clks VF610_CLK_FTM0>,
-			<&clks VF610_CLK_FTM0_EXT_SEL>,
-			<&clks VF610_CLK_FTM0_FIX_SEL>,
-			<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pwm0_1>;
-		big-endian;
-};
diff --git a/dts/upstream/Bindings/pwm/pwm-gpio.yaml b/dts/upstream/Bindings/pwm/pwm-gpio.yaml
new file mode 100644
index 00000000000..1576c193f2a
--- /dev/null
+++ b/dts/upstream/Bindings/pwm/pwm-gpio.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic software PWM for modulating GPIOs
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: pwm-gpio
+
+  "#pwm-cells":
+    const: 3
+    description:
+      See pwm.yaml in this directory for a description of the cells format.
+      The first cell which represents the PWM instance number must always
+      be zero.
+
+  gpios:
+    description:
+      GPIO to be modulated
+    maxItems: 1
+
+required:
+  - compatible
+  - "#pwm-cells"
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    pwm {
+        #pwm-cells = <3>;
+        compatible = "pwm-gpio";
+        gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/dts/upstream/Bindings/pwm/pwm.yaml b/dts/upstream/Bindings/pwm/pwm.yaml
index abd9fa87335..f2206ec3c7c 100644
--- a/dts/upstream/Bindings/pwm/pwm.yaml
+++ b/dts/upstream/Bindings/pwm/pwm.yaml
@@ -16,8 +16,10 @@ properties:
     pattern: "^pwm(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   "#pwm-cells":
-    description:
-      Number of cells in a PWM specifier.
+    description: |
+      Number of cells in a PWM specifier. Typically the cells represent, in
+      order: the chip-relative PWM number, the PWM period in nanoseconds and
+      optionally a number of flags (defined in <dt-bindings/pwm/pwm.h>).
 
 required:
   - "#pwm-cells"
diff --git a/dts/upstream/Bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml b/dts/upstream/Bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml
new file mode 100644
index 00000000000..70482868797
--- /dev/null
+++ b/dts/upstream/Bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6873-dvfsrc-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DVFSRC-controlled Regulators
+
+description:
+  The Dynamic Voltage and Frequency Scaling Resource Collector Regulators
+  are controlled with votes to the DVFSRC hardware.
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6873-dvfsrc-regulator
+      - mediatek,mt8183-dvfsrc-regulator
+      - mediatek,mt8192-dvfsrc-regulator
+      - mediatek,mt8195-dvfsrc-regulator
+
+  dvfsrc-vcore:
+    description: DVFSRC-controlled SoC Vcore regulator
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+  dvfsrc-vscp:
+    description: DVFSRC-controlled System Control Processor regulator
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - dvfsrc-vcore
+  - required:
+      - dvfsrc-vscp
+
+additionalProperties: false
diff --git a/dts/upstream/Bindings/regulator/mt6315-regulator.yaml b/dts/upstream/Bindings/regulator/mt6315-regulator.yaml
index 6317daf76d1..cd4aa27218a 100644
--- a/dts/upstream/Bindings/regulator/mt6315-regulator.yaml
+++ b/dts/upstream/Bindings/regulator/mt6315-regulator.yaml
@@ -16,7 +16,11 @@ description: |
 
 properties:
   compatible:
-    const: mediatek,mt6315-regulator
+    oneOf:
+      - items:
+          - const: mediatek,mt6319-regulator
+          - const: mediatek,mt6315-regulator
+      - const: mediatek,mt6315-regulator
 
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/regulator/nxp,pca9450-regulator.yaml b/dts/upstream/Bindings/regulator/nxp,pca9450-regulator.yaml
index 849bfa50bdb..f8057bba747 100644
--- a/dts/upstream/Bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/dts/upstream/Bindings/regulator/nxp,pca9450-regulator.yaml
@@ -96,7 +96,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupts
   - regulators
 
 additionalProperties: false
diff --git a/dts/upstream/Bindings/regulator/qcom,qca6390-pmu.yaml b/dts/upstream/Bindings/regulator/qcom,qca6390-pmu.yaml
new file mode 100644
index 00000000000..3aaa9653419
--- /dev/null
+++ b/dts/upstream/Bindings/regulator/qcom,qca6390-pmu.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCA6390 PMU Regulators
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  The QCA6390 package contains discrete modules for WLAN and Bluetooth. They
+  are powered by the Power Management Unit (PMU) that takes inputs from the
+  host and provides LDO outputs. This document describes this module.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qca6390-pmu
+      - qcom,wcn7850-pmu
+
+  vdd-supply:
+    description: VDD supply regulator handle
+
+  vddaon-supply:
+    description: VDD_AON supply regulator handle
+
+  vdddig-supply:
+    description: VDD_DIG supply regulator handle
+
+  vddpmu-supply:
+    description: VDD_PMU supply regulator handle
+
+  vddio1p2-supply:
+    description: VDD_IO_1P2 supply regulator handle
+
+  vddrfa0p95-supply:
+    description: VDD_RFA_0P95 supply regulator handle
+
+  vddrfa1p2-supply:
+    description: VDD_RFA_1P2 supply regulator handle
+
+  vddrfa1p3-supply:
+    description: VDD_RFA_1P3 supply regulator handle
+
+  vddrfa1p8-supply:
+    description: VDD_RFA_1P8 supply regulator handle
+
+  vddrfa1p9-supply:
+    description: VDD_RFA_1P9 supply regulator handle
+
+  vddpcie1p3-supply:
+    description: VDD_PCIE_1P3 supply regulator handle
+
+  vddpcie1p9-supply:
+    description: VDD_PCIE_1P9 supply regulator handle
+
+  vddio-supply:
+    description: VDD_IO supply regulator handle
+
+  wlan-enable-gpios:
+    maxItems: 1
+    description: GPIO line enabling the ATH11K WLAN module supplied by the PMU
+
+  bt-enable-gpios:
+    maxItems: 1
+    description: GPIO line enabling the ATH11K Bluetooth module supplied by the PMU
+
+  clocks:
+    maxItems: 1
+    description: Reference clock handle
+
+  regulators:
+    type: object
+    description:
+      LDO outputs of the PMU
+
+    patternProperties:
+      "^ldo[0-9]$":
+        $ref: regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - regulators
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,qca6390-pmu
+    then:
+      required:
+        - vddaon-supply
+        - vddpmu-supply
+        - vddrfa0p95-supply
+        - vddrfa1p3-supply
+        - vddrfa1p9-supply
+        - vddpcie1p3-supply
+        - vddpcie1p9-supply
+        - vddio-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,wcn7850-pmu
+    then:
+      required:
+        - vdd-supply
+        - vddio-supply
+        - vddaon-supply
+        - vdddig-supply
+        - vddrfa1p2-supply
+        - vddrfa1p8-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    pmu {
+        compatible = "qcom,qca6390-pmu";
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+
+        vddaon-supply = <&vreg_s6a_0p95>;
+        vddpmu-supply = <&vreg_s2f_0p95>;
+        vddrfa0p95-supply = <&vreg_s2f_0p95>;
+        vddrfa1p3-supply = <&vreg_s8c_1p3>;
+        vddrfa1p9-supply = <&vreg_s5a_1p9>;
+        vddpcie1p3-supply = <&vreg_s8c_1p3>;
+        vddpcie1p9-supply = <&vreg_s5a_1p9>;
+        vddio-supply = <&vreg_s4a_1p8>;
+
+        wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+        bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+        regulators {
+            vreg_pmu_rfa_cmn: ldo0 {
+                regulator-name = "vreg_pmu_rfa_cmn";
+            };
+
+            vreg_pmu_aon_0p59: ldo1 {
+                regulator-name = "vreg_pmu_aon_0p59";
+            };
+
+            vreg_pmu_wlcx_0p8: ldo2 {
+                regulator-name = "vreg_pmu_wlcx_0p8";
+            };
+
+            vreg_pmu_wlmx_0p85: ldo3 {
+                regulator-name = "vreg_pmu_wlmx_0p85";
+            };
+
+            vreg_pmu_btcmx_0p85: ldo4 {
+                regulator-name = "vreg_pmu_btcmx_0p85";
+            };
+
+            vreg_pmu_rfa_0p8: ldo5 {
+                regulator-name = "vreg_pmu_rfa_0p8";
+            };
+
+            vreg_pmu_rfa_1p2: ldo6 {
+                regulator-name = "vreg_pmu_rfa_1p2";
+            };
+
+            vreg_pmu_rfa_1p7: ldo7 {
+                regulator-name = "vreg_pmu_rfa_1p7";
+            };
+
+            vreg_pmu_pcie_0p9: ldo8 {
+                regulator-name = "vreg_pmu_pcie_0p9";
+            };
+
+            vreg_pmu_pcie_1p8: ldo9 {
+                regulator-name = "vreg_pmu_pcie_1p8";
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/regulator/richtek,rtq2208.yaml b/dts/upstream/Bindings/regulator/richtek,rtq2208.yaml
index 609c06615bd..87accc6f13b 100644
--- a/dts/upstream/Bindings/regulator/richtek,rtq2208.yaml
+++ b/dts/upstream/Bindings/regulator/richtek,rtq2208.yaml
@@ -75,6 +75,12 @@ properties:
         description:
           regulator description for ldo[1-2].
 
+        properties:
+          richtek,fixed-microvolt:
+            description: |
+              This property can be used to set a fixed operating voltage that lies outside
+              the range of the regulator's adjustable mode.
+
 required:
   - compatible
   - reg
@@ -177,6 +183,8 @@ examples:
             };
           };
           ldo1 {
+            /* Fixed LDO VOUT */
+            richtek,fixed-microvolt = <1200000>;
             regulator-min-microvolt = <1200000>;
             regulator-max-microvolt = <1200000>;
             regulator-always-on;
@@ -185,7 +193,8 @@ examples:
             };
           };
           ldo2 {
-            regulator-min-microvolt = <3300000>;
+            /* Adjustable LDO VOUT */
+            regulator-min-microvolt = <1800000>;
             regulator-max-microvolt = <3300000>;
             regulator-always-on;
             regulator-state-mem {
diff --git a/dts/upstream/Bindings/regulator/rohm,bd96801-regulator.yaml b/dts/upstream/Bindings/regulator/rohm,bd96801-regulator.yaml
new file mode 100644
index 00000000000..b3d2d7d583c
--- /dev/null
+++ b/dts/upstream/Bindings/regulator/rohm,bd96801-regulator.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd96801-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description:
+  This module is part of the ROHM BD96801 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  Regulator nodes should be named to buck_<number> and ldo_<number>.
+  The valid names for BD96801 regulator nodes are
+  buck1, buck2, buck3, buck4, ldo5, ldo6, ldo7
+
+patternProperties:
+  "^ldo[5-7]$":
+    type: object
+    description:
+      Properties for single LDO regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      rohm,initial-voltage-microvolt:
+        description:
+          Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+          this value. NOTE, This can be modified via I2C only when PMIC is in
+          STBY state.
+        minimum: 300000
+        maximum: 3300000
+
+    unevaluatedProperties: false
+
+  "^buck[1-4]$":
+    type: object
+    description:
+      Properties for single BUCK regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      rohm,initial-voltage-microvolt:
+        description:
+          Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+          this value. NOTE, This can be modified via I2C only when PMIC is in
+          STBY state.
+        minimum: 500000
+        maximum: 3300000
+
+      rohm,keep-on-stby:
+        description:
+          Keep the regulator powered when PMIC transitions to STBY state.
+        type: boolean
+
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/dts/upstream/Bindings/regulator/sprd,sc2731-regulator.txt b/dts/upstream/Bindings/regulator/sprd,sc2731-regulator.txt
deleted file mode 100644
index 63dc07877cd..00000000000
--- a/dts/upstream/Bindings/regulator/sprd,sc2731-regulator.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Spreadtrum SC2731 Voltage regulators
-
-The SC2731 integrates low-voltage and low quiescent current DCDC/LDO.
-14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have
-their own bypass (power-down) control signals. External tantalum or MLCC
-ceramic capacitors are recommended to use with these LDOs.
-
-Required properties:
- - compatible: should be "sprd,sc27xx-regulator".
-
-List of regulators provided by this controller. It is named according to
-its regulator type, BUCK_<name> and LDO_<name>. The definition for each
-of these nodes is defined using the standard binding for regulators at
-Documentation/devicetree/bindings/regulator/regulator.txt.
-
-The valid names for regulators are:
-BUCK:
-	BUCK_CPU0, BUCK_CPU1, BUCK_RF
-LDO:
-	LDO_CAMA0, LDO_CAMA1, LDO_CAMMOT, LDO_VLDO, LDO_EMMCCORE, LDO_SDCORE,
-	LDO_SDIO, LDO_WIFIPA, LDO_USB33, LDO_CAMD0, LDO_CAMD1, LDO_CON,
-	LDO_CAMIO, LDO_SRAM
-
-Example:
-	regulators {
-		compatible = "sprd,sc27xx-regulator";
-
-		vddarm0: BUCK_CPU0 {
-			regulator-name = "vddarm0";
-			regulator-min-microvolt = <400000>;
-			regulator-max-microvolt = <1996875>;
-			regulator-ramp-delay = <25000>;
-			regulator-always-on;
-		};
-
-		vddcama0: LDO_CAMA0 {
-			regulator-name = "vddcama0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3750000>;
-			regulator-enable-ramp-delay = <100>;
-		};
-		...
-	};
diff --git a/dts/upstream/Bindings/regulator/sprd,sc2731-regulator.yaml b/dts/upstream/Bindings/regulator/sprd,sc2731-regulator.yaml
new file mode 100644
index 00000000000..ffb2924dde3
--- /dev/null
+++ b/dts/upstream/Bindings/regulator/sprd,sc2731-regulator.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/sprd,sc2731-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 Power Management IC regulators
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  The SC2731 integrates low-voltage and low quiescent current DCDC/LDO.
+  14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have
+  their own bypass (power-down) control signals. It is recommended to use
+  external tantalum or MLCC ceramic capacitors with these LDOs.
+  Valid names for the regulators are:
+    BUCK:
+      BUCK_CPU0, BUCK_CPU1, BUCK_RF
+    LDO:
+      LDO_CAMA0, LDO_CAMA1, LDO_CAMD0, LDO_CAMD1, LDO_CAMIO, LDO_CAMMOT,
+      LDO_CON, LDO_EMMCCORE, LDO_SDCORE, LDO_SDIO, LDO_SRAM, LDO_USB33,
+      LDO_VLDO, LDO_WIFIPA
+
+properties:
+  compatible:
+    const: sprd,sc2731-regulator
+
+patternProperties:
+  "^BUCK_(CPU[0-1]|RF)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+  "^LDO_(CAM(A0|A1|D0|D1|IO|MOT)|CON|EMMCCORE|SD(CORE|IO)|SRAM|USB33|VLDO|WIFIPA)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    regulators {
+      compatible = "sprd,sc2731-regulator";
+
+      BUCK_CPU0 {
+        regulator-name = "vddarm0";
+        regulator-min-microvolt = <400000>;
+        regulator-max-microvolt = <1996875>;
+        regulator-ramp-delay = <25000>;
+        regulator-always-on;
+      };
+
+      LDO_CAMA0 {
+        regulator-name = "vddcama0";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3750000>;
+        regulator-enable-ramp-delay = <100>;
+      };
+    };
+...
diff --git a/dts/upstream/Bindings/regulator/st,stm32mp1-pwr-reg.yaml b/dts/upstream/Bindings/regulator/st,stm32mp1-pwr-reg.yaml
index c9586d277f4..3cb2dad1878 100644
--- a/dts/upstream/Bindings/regulator/st,stm32mp1-pwr-reg.yaml
+++ b/dts/upstream/Bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -11,7 +11,12 @@ maintainers:
 
 properties:
   compatible:
-    const: st,stm32mp1,pwr-reg
+    oneOf:
+      - items:
+          - const: st,stm32mp1,pwr-reg
+      - items:
+          - const: st,stm32mp13-pwr-reg
+          - const: st,stm32mp1,pwr-reg
 
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/regulator/ti,tps65132.yaml b/dts/upstream/Bindings/regulator/ti,tps65132.yaml
index 6a6d1a3d6fa..873d92738eb 100644
--- a/dts/upstream/Bindings/regulator/ti,tps65132.yaml
+++ b/dts/upstream/Bindings/regulator/ti,tps65132.yaml
@@ -23,6 +23,8 @@ properties:
   reg:
     maxItems: 1
 
+  vin-supply: true
+
 patternProperties:
   "^out[pn]$":
     type: object
@@ -65,6 +67,7 @@ examples:
         regulator@3e {
             compatible = "ti,tps65132";
             reg = <0x3e>;
+            vin-supply = <&supply>;
 
             outp {
                 regulator-name = "outp";
diff --git a/dts/upstream/Bindings/regulator/twl-regulator.txt b/dts/upstream/Bindings/regulator/twl-regulator.txt
deleted file mode 100644
index 549f80436de..00000000000
--- a/dts/upstream/Bindings/regulator/twl-regulator.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-TWL family of regulators
-
-Required properties:
-For twl6030 regulators/LDOs
-- compatible:
-  - "ti,twl6030-vaux1" for VAUX1 LDO
-  - "ti,twl6030-vaux2" for VAUX2 LDO
-  - "ti,twl6030-vaux3" for VAUX3 LDO
-  - "ti,twl6030-vmmc" for VMMC LDO
-  - "ti,twl6030-vpp" for VPP LDO
-  - "ti,twl6030-vusim" for VUSIM LDO
-  - "ti,twl6030-vana" for VANA LDO
-  - "ti,twl6030-vcxio" for VCXIO LDO
-  - "ti,twl6030-vdac" for VDAC LDO
-  - "ti,twl6030-vusb" for VUSB LDO
-  - "ti,twl6030-v1v8" for V1V8 LDO
-  - "ti,twl6030-v2v1" for V2V1 LDO
-  - "ti,twl6030-vdd1" for VDD1 SMPS
-  - "ti,twl6030-vdd2" for VDD2 SMPS
-  - "ti,twl6030-vdd3" for VDD3 SMPS
-For twl6032 regulators/LDOs
-- compatible:
-  - "ti,twl6032-ldo1" for LDO1 LDO
-  - "ti,twl6032-ldo2" for LDO2 LDO
-  - "ti,twl6032-ldo3" for LDO3 LDO
-  - "ti,twl6032-ldo4" for LDO4 LDO
-  - "ti,twl6032-ldo5" for LDO5 LDO
-  - "ti,twl6032-ldo6" for LDO6 LDO
-  - "ti,twl6032-ldo7" for LDO7 LDO
-  - "ti,twl6032-ldoln" for LDOLN LDO
-  - "ti,twl6032-ldousb" for LDOUSB LDO
-  - "ti,twl6032-smps3" for SMPS3 SMPS
-  - "ti,twl6032-smps4" for SMPS4 SMPS
-  - "ti,twl6032-vio" for VIO SMPS
-For twl4030 regulators/LDOs
-- compatible:
-  - "ti,twl4030-vaux1" for VAUX1 LDO
-  - "ti,twl4030-vaux2" for VAUX2 LDO
-  - "ti,twl5030-vaux2" for VAUX2 LDO
-  - "ti,twl4030-vaux3" for VAUX3 LDO
-  - "ti,twl4030-vaux4" for VAUX4 LDO
-  - "ti,twl4030-vmmc1" for VMMC1 LDO
-  - "ti,twl4030-vmmc2" for VMMC2 LDO
-  - "ti,twl4030-vpll1" for VPLL1 LDO
-  - "ti,twl4030-vpll2" for VPLL2 LDO
-  - "ti,twl4030-vsim" for VSIM LDO
-  - "ti,twl4030-vdac" for VDAC LDO
-  - "ti,twl4030-vintana2" for VINTANA2 LDO
-  - "ti,twl4030-vio" for VIO LDO
-  - "ti,twl4030-vdd1" for VDD1 SMPS
-  - "ti,twl4030-vdd2" for VDD2 SMPS
-  - "ti,twl4030-vintana1" for VINTANA1 LDO
-  - "ti,twl4030-vintdig" for VINTDIG LDO
-  - "ti,twl4030-vusb1v5" for VUSB1V5 LDO
-  - "ti,twl4030-vusb1v8" for VUSB1V8 LDO
-  - "ti,twl4030-vusb3v1" for VUSB3V1 LDO
-
-Optional properties:
-- Any optional property defined in bindings/regulator/regulator.txt
-For twl4030 regulators/LDOs:
- - regulator-initial-mode:
-  - 0x08 - Sleep mode, the nominal output voltage is maintained with low power
-           consumption with low load current capability.
-  - 0x0e - Active mode, the regulator can deliver its nominal output voltage
-           with full-load current capability.
-
-Example:
-
-	xyz: regulator@0 {
-		compatible = "ti,twl6030-vaux1";
-		regulator-min-microvolt  = <1000000>;
-		regulator-max-microvolt  = <3000000>;
-	};
-
-For twl6030 regulators/LDOs:
-
- - ti,retain-on-reset: Does not turn off the supplies during warm
-                       reset. Could be needed for VMMC, as TWL6030
-                       reset sequence for this signal does not comply
-                       with the SD specification.
diff --git a/dts/upstream/Bindings/remoteproc/fsl,imx-rproc.yaml b/dts/upstream/Bindings/remoteproc/fsl,imx-rproc.yaml
index df36e29d974..57d75acb0b5 100644
--- a/dts/upstream/Bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/dts/upstream/Bindings/remoteproc/fsl,imx-rproc.yaml
@@ -59,6 +59,7 @@ properties:
     maxItems: 32
 
   power-domains:
+    minItems: 2
     maxItems: 8
 
   fsl,auto-boot:
@@ -99,6 +100,20 @@ allOf:
       properties:
         fsl,iomuxc-gpr: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-cm4
+              - fsl,imx8qm-cm4
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
 additionalProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/remoteproc/qcom,rpm-proc.yaml b/dts/upstream/Bindings/remoteproc/qcom,rpm-proc.yaml
index 7afafde17a3..61cf4fe19ca 100644
--- a/dts/upstream/Bindings/remoteproc/qcom,rpm-proc.yaml
+++ b/dts/upstream/Bindings/remoteproc/qcom,rpm-proc.yaml
@@ -8,7 +8,7 @@ title: Qualcomm Resource Power Manager (RPM) Processor/Subsystem
 
 maintainers:
   - Bjorn Andersson <andersson@kernel.org>
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
   - Stephan Gerhold <stephan@gerhold.net>
 
 description: |
diff --git a/dts/upstream/Bindings/remoteproc/qcom,sa8775p-pas.yaml b/dts/upstream/Bindings/remoteproc/qcom,sa8775p-pas.yaml
new file mode 100644
index 00000000000..7fe401a0680
--- /dev/null
+++ b/dts/upstream/Bindings/remoteproc/qcom,sa8775p-pas.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sa8775p-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SA8775p Peripheral Authentication Service
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  Qualcomm SA8775p SoC Peripheral Authentication Service loads and boots firmware
+  on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sa8775p-adsp-pas
+      - qcom,sa8775p-cdsp0-pas
+      - qcom,sa8775p-cdsp1-pas
+      - qcom,sa8775p-gpdsp0-pas
+      - qcom,sa8775p-gpdsp1-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Firmware name of the Hexagon core
+
+  memory-region:
+    items:
+      - description: Memory region for main Firmware authentication
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    maxItems: 5
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sa8775p-adsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sa8775p-cdsp0-pas
+            - qcom,sa8775p-cdsp1-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MXC power domain
+            - description: NSP0 power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mxc
+            - const: nsp
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sa8775p-gpdsp0-pas
+            - qcom,sa8775p-gpdsp1-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MXC power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mxc
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    remoteproc@30000000 {
+        compatible = "qcom,sa8775p-adsp-pas";
+        reg = <0x30000000 0x100>;
+
+        interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        power-domains = <&rpmhpd RPMHPD_LCX>, <&rpmhpd RPMHPD_LMX>;
+        power-domain-names = "lcx", "lmx";
+
+        interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+        memory-region = <&pil_adsp_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&smp2p_adsp_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                   IPCC_MPROC_SIGNAL_GLINK_QMP
+                                   IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "lpass";
+            qcom,remote-pid = <2>;
+        };
+    };
diff --git a/dts/upstream/Bindings/remoteproc/ti,k3-dsp-rproc.yaml b/dts/upstream/Bindings/remoteproc/ti,k3-dsp-rproc.yaml
index 9768db8663e..b51bb863d75 100644
--- a/dts/upstream/Bindings/remoteproc/ti,k3-dsp-rproc.yaml
+++ b/dts/upstream/Bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -25,9 +25,6 @@ description: |
   host processor (Arm CorePac) to perform the device management of the remote
   processor and to communicate with the remote processor.
 
-allOf:
-  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
-
 properties:
   compatible:
     enum:
@@ -89,41 +86,57 @@ properties:
       should be defined as per the generic bindings in,
       Documentation/devicetree/bindings/sram/sram.yaml
 
-if:
-  properties:
-    compatible:
-      enum:
-        - ti,j721e-c66-dsp
-then:
-  properties:
-    reg:
-      items:
-        - description: Address and Size of the L2 SRAM internal memory region
-        - description: Address and Size of the L1 PRAM internal memory region
-        - description: Address and Size of the L1 DRAM internal memory region
-    reg-names:
-      items:
-        - const: l2sram
-        - const: l1pram
-        - const: l1dram
-else:
-  if:
-    properties:
-      compatible:
-        enum:
-          - ti,am62a-c7xv-dsp
-          - ti,j721e-c71-dsp
-          - ti,j721s2-c71-dsp
-  then:
-    properties:
-      reg:
-        items:
-          - description: Address and Size of the L2 SRAM internal memory region
-          - description: Address and Size of the L1 DRAM internal memory region
-      reg-names:
-        items:
-          - const: l2sram
-          - const: l1dram
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j721e-c66-dsp
+    then:
+      properties:
+        reg:
+          items:
+            - description: Address and Size of the L2 SRAM internal memory region
+            - description: Address and Size of the L1 PRAM internal memory region
+            - description: Address and Size of the L1 DRAM internal memory region
+        reg-names:
+          items:
+            - const: l2sram
+            - const: l1pram
+            - const: l1dram
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,j721e-c71-dsp
+            - ti,j721s2-c71-dsp
+    then:
+      properties:
+        reg:
+          items:
+            - description: Address and Size of the L2 SRAM internal memory region
+            - description: Address and Size of the L1 DRAM internal memory region
+        reg-names:
+          items:
+            - const: l2sram
+            - const: l1dram
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am62a-c7xv-dsp
+    then:
+      properties:
+        reg:
+          items:
+            - description: Address and Size of the L2 SRAM internal memory region
+        reg-names:
+          items:
+            - const: l2sram
+
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
 required:
   - compatible
diff --git a/dts/upstream/Bindings/reset/nuvoton,ma35d1-reset.yaml b/dts/upstream/Bindings/reset/nuvoton,ma35d1-reset.yaml
index 34c5c1c08ec..3ce7dcecd87 100644
--- a/dts/upstream/Bindings/reset/nuvoton,ma35d1-reset.yaml
+++ b/dts/upstream/Bindings/reset/nuvoton,ma35d1-reset.yaml
@@ -18,6 +18,7 @@ properties:
   compatible:
     items:
       - const: nuvoton,ma35d1-reset
+      - const: syscon
 
   reg:
     maxItems: 1
@@ -37,7 +38,7 @@ examples:
   - |
 
     system-management@40460000 {
-        compatible = "nuvoton,ma35d1-reset";
+        compatible = "nuvoton,ma35d1-reset", "syscon";
         reg = <0x40460000 0x200>;
         #reset-cells = <1>;
     };
diff --git a/dts/upstream/Bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/dts/upstream/Bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
index 03c18611e42..b0b20af1531 100644
--- a/dts/upstream/Bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
+++ b/dts/upstream/Bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
@@ -42,6 +42,12 @@ properties:
       0 = Port 1 Phy reset
       1 = Port 2 Phy reset
 
+  regulator-vbus:
+    type: object
+    description: USB VBUS regulator
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -49,6 +55,7 @@ required:
   - resets
   - power-domains
   - '#reset-cells'
+  - regulator-vbus
 
 additionalProperties: false
 
@@ -64,4 +71,7 @@ examples:
         resets = <&cpg R9A07G044_USB_PRESETN>;
         power-domains = <&cpg>;
         #reset-cells = <1>;
+        regulator-vbus {
+            regulator-name = "vbus";
+        };
     };
diff --git a/dts/upstream/Bindings/reset/ti,sci-reset.yaml b/dts/upstream/Bindings/reset/ti,sci-reset.yaml
index e10eb98edda..1db08ce9ae2 100644
--- a/dts/upstream/Bindings/reset/ti,sci-reset.yaml
+++ b/dts/upstream/Bindings/reset/ti,sci-reset.yaml
@@ -37,7 +37,7 @@ properties:
       The second cell should contain the reset mask corresponding to the device
       used by system controller.
 
-      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      Please see https://software-dl.ti.com/tisci/esd/latest/index.html for
       protocol documentation for the values to be used for different devices.
 
 
diff --git a/dts/upstream/Bindings/riscv/cpus.yaml b/dts/upstream/Bindings/riscv/cpus.yaml
index d87dd50f1a4..8edc8261241 100644
--- a/dts/upstream/Bindings/riscv/cpus.yaml
+++ b/dts/upstream/Bindings/riscv/cpus.yaml
@@ -47,6 +47,7 @@ properties:
               - sifive,u74
               - sifive,u74-mc
               - thead,c906
+              - thead,c908
               - thead,c910
               - thead,c920
           - const: riscv
@@ -102,26 +103,7 @@ properties:
 
   interrupt-controller:
     type: object
-    additionalProperties: false
-    description: Describes the CPU's local interrupt controller
-
-    properties:
-      '#interrupt-cells':
-        const: 1
-
-      compatible:
-        oneOf:
-          - items:
-              - const: andestech,cpu-intc
-              - const: riscv,cpu-intc
-          - const: riscv,cpu-intc
-
-      interrupt-controller: true
-
-    required:
-      - '#interrupt-cells'
-      - compatible
-      - interrupt-controller
+    $ref: /schemas/interrupt-controller/riscv,cpu-intc.yaml#
 
   cpu-idle-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
diff --git a/dts/upstream/Bindings/riscv/extensions.yaml b/dts/upstream/Bindings/riscv/extensions.yaml
index 468c646247a..a06dbc6b492 100644
--- a/dts/upstream/Bindings/riscv/extensions.yaml
+++ b/dts/upstream/Bindings/riscv/extensions.yaml
@@ -177,6 +177,13 @@ properties:
             is supported as ratified at commit 5059e0ca641c ("update to
             ratified") of the riscv-zacas.
 
+        - const: zawrs
+          description: |
+            The Zawrs extension for entering a low-power state or for trapping
+            to a hypervisor while waiting on a store to a memory location, as
+            ratified in commit 98918c844281 ("Merge pull request #1217 from
+            riscv/zawrs") of riscv-isa-manual.
+
         - const: zba
           description: |
             The standard Zba bit-manipulation extension for address generation
@@ -220,6 +227,43 @@ properties:
             instructions as ratified at commit 6d33919 ("Merge pull request #158
             from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
 
+        - const: zca
+          description: |
+            The Zca extension part of Zc* standard extensions for code size
+            reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on
+            RV64 as it contains no instructions") of riscv-code-size-reduction,
+            merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed
+            of zc.adoc to src tree.").
+
+        - const: zcb
+          description: |
+            The Zcb extension part of Zc* standard extensions for code size
+            reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on
+            RV64 as it contains no instructions") of riscv-code-size-reduction,
+            merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed
+            of zc.adoc to src tree.").
+
+        - const: zcd
+          description: |
+            The Zcd extension part of Zc* standard extensions for code size
+            reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on
+            RV64 as it contains no instructions") of riscv-code-size-reduction,
+            merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed
+            of zc.adoc to src tree.").
+
+        - const: zcf
+          description: |
+            The Zcf extension part of Zc* standard extensions for code size
+            reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on
+            RV64 as it contains no instructions") of riscv-code-size-reduction,
+            merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed
+            of zc.adoc to src tree.").
+
+        - const: zcmop
+          description:
+            The standard Zcmop extension version 1.0, as ratified in commit
+            c732a4f39a4 ("Zcmop is ratified/1.0") of the riscv-isa-manual.
+
         - const: zfa
           description:
             The standard Zfa extension for additional floating point
@@ -363,6 +407,11 @@ properties:
             ratified in the 20191213 version of the unprivileged ISA
             specification.
 
+        - const: zimop
+          description:
+            The standard Zimop extension version 1.0, as ratified in commit
+            58220614a5f ("Zimop is ratified/1.0") of the riscv-isa-manual.
+
         - const: ztso
           description:
             The standard Ztso extension for total store ordering, as ratified
@@ -381,6 +430,36 @@ properties:
             instructions, as ratified in commit 56ed795 ("Update
             riscv-crypto-spec-vector.adoc") of riscv-crypto.
 
+        - const: zve32f
+          description:
+            The standard Zve32f extension for embedded processors, as ratified
+            in commit 6f702a2 ("Vector extensions are now ratified") of
+            riscv-v-spec.
+
+        - const: zve32x
+          description:
+            The standard Zve32x extension for embedded processors, as ratified
+            in commit 6f702a2 ("Vector extensions are now ratified") of
+            riscv-v-spec.
+
+        - const: zve64d
+          description:
+            The standard Zve64d extension for embedded processors, as ratified
+            in commit 6f702a2 ("Vector extensions are now ratified") of
+            riscv-v-spec.
+
+        - const: zve64f
+          description:
+            The standard Zve64f extension for embedded processors, as ratified
+            in commit 6f702a2 ("Vector extensions are now ratified") of
+            riscv-v-spec.
+
+        - const: zve64x
+          description:
+            The standard Zve64x extension for embedded processors, as ratified
+            in commit 6f702a2 ("Vector extensions are now ratified") of
+            riscv-v-spec.
+
         - const: zvfh
           description:
             The standard Zvfh extension for vectored half-precision
@@ -484,5 +563,58 @@ properties:
             Registers in the AX45MP datasheet.
             https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
 
+    allOf:
+      # Zcb depends on Zca
+      - if:
+          contains:
+            const: zcb
+        then:
+          contains:
+            const: zca
+      # Zcd depends on Zca and D
+      - if:
+          contains:
+            const: zcd
+        then:
+          allOf:
+            - contains:
+                const: zca
+            - contains:
+                const: d
+      # Zcf depends on Zca and F
+      - if:
+          contains:
+            const: zcf
+        then:
+          allOf:
+            - contains:
+                const: zca
+            - contains:
+                const: f
+      # Zcmop depends on Zca
+      - if:
+          contains:
+            const: zcmop
+        then:
+          contains:
+            const: zca
+
+allOf:
+  # Zcf extension does not exist on rv64
+  - if:
+      properties:
+        riscv,isa-extensions:
+          contains:
+            const: zcf
+        riscv,isa-base:
+          contains:
+            const: rv64i
+    then:
+      properties:
+        riscv,isa-extensions:
+          not:
+            contains:
+              const: zcf
+
 additionalProperties: true
 ...
diff --git a/dts/upstream/Bindings/riscv/microchip.yaml b/dts/upstream/Bindings/riscv/microchip.yaml
index 4a29c890619..78ce76ae1b6 100644
--- a/dts/upstream/Bindings/riscv/microchip.yaml
+++ b/dts/upstream/Bindings/riscv/microchip.yaml
@@ -29,6 +29,7 @@ properties:
           - enum:
               - aldec,tysom-m-mpfs250t-rev2
               - aries,m100pfsevp
+              - beagle,beaglev-fire
               - microchip,mpfs-sev-kit
               - sundance,polarberry
           - const: microchip,mpfs
diff --git a/dts/upstream/Bindings/riscv/starfive.yaml b/dts/upstream/Bindings/riscv/starfive.yaml
index b672f852194..4d5c857b3ca 100644
--- a/dts/upstream/Bindings/riscv/starfive.yaml
+++ b/dts/upstream/Bindings/riscv/starfive.yaml
@@ -27,6 +27,7 @@ properties:
       - items:
           - enum:
               - milkv,mars
+              - pine64,star64
               - starfive,visionfive-2-v1.2a
               - starfive,visionfive-2-v1.3b
           - const: starfive,jh7110
diff --git a/dts/upstream/Bindings/rng/amlogic,meson-rng.yaml b/dts/upstream/Bindings/rng/amlogic,meson-rng.yaml
index afa52af442a..f03b87e1b01 100644
--- a/dts/upstream/Bindings/rng/amlogic,meson-rng.yaml
+++ b/dts/upstream/Bindings/rng/amlogic,meson-rng.yaml
@@ -26,6 +26,9 @@ properties:
     items:
       - const: core
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/rng/samsung,exynos5250-trng.yaml b/dts/upstream/Bindings/rng/samsung,exynos5250-trng.yaml
index 765d9f9edd6..1a71935d8a1 100644
--- a/dts/upstream/Bindings/rng/samsung,exynos5250-trng.yaml
+++ b/dts/upstream/Bindings/rng/samsung,exynos5250-trng.yaml
@@ -12,14 +12,17 @@ maintainers:
 
 properties:
   compatible:
-    const: samsung,exynos5250-trng
+    enum:
+      - samsung,exynos5250-trng
+      - samsung,exynos850-trng
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    items:
-      - const: secss
+    minItems: 1
+    maxItems: 2
 
   reg:
     maxItems: 1
@@ -30,6 +33,35 @@ required:
   - clock-names
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-trng
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SSS (Security Sub System) operating clock
+            - description: SSS (Security Sub System) bus clock
+
+        clock-names:
+          items:
+            - const: secss
+            - const: pclk
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: SSS (Security Sub System) operating clock
+
+        clock-names:
+          items:
+            - const: secss
+
 additionalProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/rtc/fsl,ls-ftm-alarm.yaml b/dts/upstream/Bindings/rtc/fsl,ls-ftm-alarm.yaml
new file mode 100644
index 00000000000..388102ae30c
--- /dev/null
+++ b/dts/upstream/Bindings/rtc/fsl,ls-ftm-alarm.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/fsl,ls-ftm-alarm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale FlexTimer Module (FTM) Alarm
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1012a-ftm-alarm
+      - fsl,ls1021a-ftm-alarm
+      - fsl,ls1028a-ftm-alarm
+      - fsl,ls1043a-ftm-alarm
+      - fsl,ls1046a-ftm-alarm
+      - fsl,ls1088a-ftm-alarm
+      - fsl,ls208xa-ftm-alarm
+      - fsl,lx2160a-ftm-alarm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,rcpm-wakeup:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to rcpm node
+          - description: bit mask of IPPDEXPCR0
+          - description: bit mask of IPPDEXPCR1
+          - description: bit mask of IPPDEXPCR2
+          - description: bit mask of IPPDEXPCR3
+          - description: bit mask of IPPDEXPCR4
+          - description: bit mask of IPPDEXPCR5
+          - description: bit mask of IPPDEXPCR6
+        minItems: 1
+    description:
+      phandle to rcpm node, Please refer
+      Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If the host controller is big-endian mode, specify this property.
+      The default endian mode is little-endian.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,rcpm-wakeup
+
+allOf:
+  - $ref: rtc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@2800000 {
+        compatible = "fsl,ls1088a-ftm-alarm";
+        reg = <0x2800000 0x10000>;
+        fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/dts/upstream/Bindings/rtc/rtc-fsl-ftm-alarm.txt b/dts/upstream/Bindings/rtc/rtc-fsl-ftm-alarm.txt
deleted file mode 100644
index fffac74999d..00000000000
--- a/dts/upstream/Bindings/rtc/rtc-fsl-ftm-alarm.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Freescale FlexTimer Module (FTM) Alarm
-
-Required properties:
-- compatible : Should be "fsl,<chip>-ftm-alarm", the
-	       supported chips include
-	       "fsl,ls1012a-ftm-alarm"
-	       "fsl,ls1021a-ftm-alarm"
-	       "fsl,ls1028a-ftm-alarm"
-	       "fsl,ls1043a-ftm-alarm"
-	       "fsl,ls1046a-ftm-alarm"
-	       "fsl,ls1088a-ftm-alarm"
-	       "fsl,ls208xa-ftm-alarm"
-	       "fsl,lx2160a-ftm-alarm"
-- reg : Specifies base physical address and size of the register sets for the
-  FlexTimer Module.
-- interrupts : Should be the FlexTimer Module interrupt.
-- fsl,rcpm-wakeup property and rcpm node : Please refer
-	Documentation/devicetree/bindings/soc/fsl/rcpm.txt
-
-Optional properties:
-- big-endian: If the host controller is big-endian mode, specify this property.
-  The default endian mode is little-endian.
-
-Example:
-rcpm: rcpm@1e34040 {
-	compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
-	reg = <0x0 0x1e34040 0x0 0x18>;
-	#fsl,rcpm-wakeup-cells = <6>;
-};
-
-ftm_alarm0: timer@2800000 {
-	compatible = "fsl,ls1088a-ftm-alarm";
-	reg = <0x0 0x2800000 0x0 0x10000>;
-	fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
-	interrupts = <0 44 4>;
-};
diff --git a/dts/upstream/Bindings/rtc/st,stm32-rtc.yaml b/dts/upstream/Bindings/rtc/st,stm32-rtc.yaml
index 4703083d1f1..7a0fab721cf 100644
--- a/dts/upstream/Bindings/rtc/st,stm32-rtc.yaml
+++ b/dts/upstream/Bindings/rtc/st,stm32-rtc.yaml
@@ -15,6 +15,7 @@ properties:
       - st,stm32-rtc
       - st,stm32h7-rtc
       - st,stm32mp1-rtc
+      - st,stm32mp25-rtc
 
   reg:
     maxItems: 1
@@ -90,7 +91,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: st,stm32mp1-rtc
+            enum:
+              - st,stm32mp1-rtc
+              - st,stm32mp25-rtc
 
     then:
       properties:
diff --git a/dts/upstream/Bindings/serial/mediatek,uart.yaml b/dts/upstream/Bindings/serial/mediatek,uart.yaml
index 303d02ca4e1..ff61ffdcad1 100644
--- a/dts/upstream/Bindings/serial/mediatek,uart.yaml
+++ b/dts/upstream/Bindings/serial/mediatek,uart.yaml
@@ -37,6 +37,7 @@ properties:
               - mediatek,mt7623-uart
               - mediatek,mt7629-uart
               - mediatek,mt7986-uart
+              - mediatek,mt7988-uart
               - mediatek,mt8127-uart
               - mediatek,mt8135-uart
               - mediatek,mt8173-uart
diff --git a/dts/upstream/Bindings/serial/mrvl,pxa-ssp.txt b/dts/upstream/Bindings/serial/mrvl,pxa-ssp.txt
deleted file mode 100644
index d10cc06c0c3..00000000000
--- a/dts/upstream/Bindings/serial/mrvl,pxa-ssp.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Device tree bindings for Marvell PXA SSP ports
-
-Required properties:
-
-	- compatible:	Must be one of
-				mrvl,pxa25x-ssp
-				mvrl,pxa25x-nssp
-				mrvl,pxa27x-ssp
-				mrvl,pxa3xx-ssp
-				mvrl,pxa168-ssp
-				mrvl,pxa910-ssp
-				mrvl,ce4100-ssp
-
-	- reg:		The memory base
-	- dmas:		Two dma phandles, one for rx, one for tx
-	- dma-names:	Must be "rx", "tx"
-
-
-Example for PXA3xx:
-
-	ssp0: ssp@41000000 {
-		compatible = "mrvl,pxa3xx-ssp";
-		reg = <0x41000000 0x40>;
-		ssp-id = <1>;
-		interrupts = <24>;
-		clock-names = "pxa27x-ssp.0";
-		dmas = <&dma 13
-			&dma 14>;
-		dma-names = "rx", "tx";
-	};
-
-	ssp1: ssp@41700000 {
-		compatible = "mrvl,pxa3xx-ssp";
-		reg = <0x41700000 0x40>;
-		ssp-id = <2>;
-		interrupts = <16>;
-		clock-names = "pxa27x-ssp.1";
-		dmas = <&dma 15
-			&dma 16>;
-		dma-names = "rx", "tx";
-	};
-
-	ssp2: ssp@41900000 {
-		compatibl3 = "mrvl,pxa3xx-ssp";
-		reg = <0x41900000 0x40>;
-		ssp-id = <3>;
-		interrupts = <0>;
-		clock-names = "pxa27x-ssp.2";
-		dmas = <&dma 66
-			&dma 67>;
-		dma-names = "rx", "tx";
-	};
-
-	ssp3: ssp@41a00000 {
-		compatible = "mrvl,pxa3xx-ssp";
-		reg = <0x41a00000 0x40>;
-		ssp-id = <4>;
-		interrupts = <13>;
-		clock-names = "pxa27x-ssp.3";
-		dmas = <&dma 2
-			&dma 3>;
-		dma-names = "rx", "tx";
-	};
-
diff --git a/dts/upstream/Bindings/serial/nxp,sc16is7xx.yaml b/dts/upstream/Bindings/serial/nxp,sc16is7xx.yaml
index 5dec15b7e7c..88871480018 100644
--- a/dts/upstream/Bindings/serial/nxp,sc16is7xx.yaml
+++ b/dts/upstream/Bindings/serial/nxp,sc16is7xx.yaml
@@ -28,6 +28,9 @@ properties:
   clocks:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
   clock-frequency:
     description:
       When there is no clock provider visible to the platform, this
@@ -91,6 +94,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -120,6 +124,7 @@ examples:
             compatible = "nxp,sc16is752";
             reg = <0x54>;
             clocks = <&clk20m>;
+            reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
             interrupt-parent = <&gpio3>;
             interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
             nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
diff --git a/dts/upstream/Bindings/serial/renesas,scif.yaml b/dts/upstream/Bindings/serial/renesas,scif.yaml
index f3a3eb2831e..afc7c05898a 100644
--- a/dts/upstream/Bindings/serial/renesas,scif.yaml
+++ b/dts/upstream/Bindings/serial/renesas,scif.yaml
@@ -9,9 +9,6 @@ title: Renesas Serial Communication Interface with FIFO (SCIF)
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
-allOf:
-  - $ref: serial.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -83,6 +80,8 @@ properties:
               - renesas,scif-r9a08g045      # RZ/G3S
           - const: renesas,scif-r9a07g044   # RZ/G2{L,LC} fallback
 
+      - const: renesas,scif-r9a09g057       # RZ/V2H(P)
+
   reg:
     maxItems: 1
 
@@ -95,28 +94,25 @@ properties:
           - description: Receive buffer full interrupt
           - description: Transmit buffer empty interrupt
           - description: Break interrupt
-      - items:
-          - description: Error interrupt
-          - description: Receive buffer full interrupt
-          - description: Transmit buffer empty interrupt
-          - description: Break interrupt
           - description: Data Ready interrupt
           - description: Transmit End interrupt
+          - description: Transmit End/Data Ready interrupt
+          - description: Receive buffer full interrupt (EDGE trigger)
+          - description: Transmit buffer empty interrupt (EDGE trigger)
+        minItems: 4
 
   interrupt-names:
-    oneOf:
-      - items:
-          - const: eri
-          - const: rxi
-          - const: txi
-          - const: bri
-      - items:
-          - const: eri
-          - const: rxi
-          - const: txi
-          - const: bri
-          - const: dri
-          - const: tei
+    minItems: 4
+    items:
+      - const: eri
+      - const: rxi
+      - const: txi
+      - const: bri
+      - const: dri
+      - const: tei
+      - const: tei-dri
+      - const: rxi-edge
+      - const: txi-edge
 
   clocks:
     minItems: 1
@@ -161,18 +157,92 @@ required:
   - clock-names
   - power-domains
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,rcar-gen2-scif
-          - renesas,rcar-gen3-scif
-          - renesas,rcar-gen4-scif
-          - renesas,scif-r9a07g044
-then:
-  required:
-    - resets
+allOf:
+  - $ref: serial.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-scif
+              - renesas,rcar-gen3-scif
+              - renesas,rcar-gen4-scif
+              - renesas,scif-r9a07g044
+              - renesas,scif-r9a09g057
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen1-scif
+              - renesas,rcar-gen2-scif
+              - renesas,rcar-gen3-scif
+              - renesas,rcar-gen4-scif
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+
+        interrupt-names: false
+    else:
+      required:
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,scif-r7s72100
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+
+        interrupt-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,scif-r7s9210
+              - renesas,scif-r9a07g044
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
+        interrupt-names:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,scif-r9a09g057
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+        interrupts:
+          minItems: 9
+
+        interrupt-names:
+          minItems: 9
 
 unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/serial/snps-dw-apb-uart.yaml b/dts/upstream/Bindings/serial/snps-dw-apb-uart.yaml
index 1001d2a6ace..4cdb0dcaccf 100644
--- a/dts/upstream/Bindings/serial/snps-dw-apb-uart.yaml
+++ b/dts/upstream/Bindings/serial/snps-dw-apb-uart.yaml
@@ -13,6 +13,20 @@ allOf:
   - $ref: serial.yaml#
   - $ref: rs485.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-uart
+    then:
+      properties:
+        resets:
+          minItems: 2
+    else:
+      properties:
+        resets:
+          maxItems: 1
+
 properties:
   compatible:
     oneOf:
@@ -48,6 +62,7 @@ properties:
           - enum:
               - starfive,jh7100-hsuart
               - starfive,jh7100-uart
+              - starfive,jh7110-uart
           - const: snps,dw-apb-uart
       - const: snps,dw-apb-uart
 
@@ -82,7 +97,8 @@ properties:
     type: boolean
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   reg-shift: true
 
diff --git a/dts/upstream/Bindings/serial/via,vt8500-uart.yaml b/dts/upstream/Bindings/serial/via,vt8500-uart.yaml
new file mode 100644
index 00000000000..9c6819241a4
--- /dev/null
+++ b/dts/upstream/Bindings/serial/via,vt8500-uart.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/via,vt8500-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA VT8500 and WonderMedia WM8xxx UART Controller
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+allOf:
+  - $ref: serial.yaml
+
+properties:
+  compatible:
+    enum:
+      - via,vt8500-uart # up to WM8850/WM8950
+      - wm,wm8880-uart  # for WM8880 and later
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@d8200000 {
+        compatible = "via,vt8500-uart";
+        reg = <0xd8200000 0x1040>;
+        interrupts = <32>;
+        clocks = <&clkuart0>;
+    };
diff --git a/dts/upstream/Bindings/serial/vt8500-uart.txt b/dts/upstream/Bindings/serial/vt8500-uart.txt
deleted file mode 100644
index 2b64e6107fb..00000000000
--- a/dts/upstream/Bindings/serial/vt8500-uart.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* VIA VT8500 and WonderMedia WM8xxx UART Controller
-
-Required properties:
-- compatible: should be "via,vt8500-uart" (for VIA/WonderMedia chips up to and
-	including WM8850/WM8950), or "wm,wm8880-uart" (for WM8880 and later)
-
-- reg: base physical address of the controller and length of memory mapped
-	region.
-
-- interrupts: hardware interrupt number
-
-- clocks: shall be the input parent clock phandle for the clock. This should
-	be the 24Mhz reference clock.
-
-Aliases may be defined to ensure the correct ordering of the uarts.
-
-Example:
-	aliases {
-		serial0 = &uart0;
-	};
-
-	uart0: serial@d8200000 {
-		compatible = "via,vt8500-uart";
-		reg = <0xd8200000 0x1040>;
-		interrupts = <32>;
-		clocks = <&clkuart0>;
-	};
diff --git a/dts/upstream/Bindings/soc/fsl/bman-portals.txt b/dts/upstream/Bindings/soc/fsl/bman-portals.txt
deleted file mode 100644
index 2a00e14e11e..00000000000
--- a/dts/upstream/Bindings/soc/fsl/bman-portals.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-QorIQ DPAA Buffer Manager Portals Device Tree Binding
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- BMan Portal
-	- Example
-
-BMan Portal Node
-
-Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
-interaction by software running on processor cores, accelerators and network
-interfaces with the BMan
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,bman-portal-<hardware revision>"
-			May include "fsl,<SoC>-bman-portal" or "fsl,bman-portal"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Two regions. The first is the cache-enabled region of
-			the portal. The second is the cache-inhibited region of
-			the portal
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property
-
-EXAMPLE
-
-The example below shows a (P4080) BMan portals container/bus node with two portals
-
-	bman-portals@ff4000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0xf 0xf4000000 0x200000>;
-
-		bman-portal@0 {
-			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
-			reg = <0x0 0x4000>, <0x100000 0x1000>;
-			interrupts = <105 2 0 0>;
-		};
-		bman-portal@4000 {
-			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
-			reg = <0x4000 0x4000>, <0x101000 0x1000>;
-			interrupts = <107 2 0 0>;
-		};
-	};
diff --git a/dts/upstream/Bindings/soc/fsl/bman.txt b/dts/upstream/Bindings/soc/fsl/bman.txt
deleted file mode 100644
index 48eed140765..00000000000
--- a/dts/upstream/Bindings/soc/fsl/bman.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-QorIQ DPAA Buffer Manager Device Tree Bindings
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- BMan Node
-	- BMan Private Memory Node
-	- Example
-
-BMan Node
-
-The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
-BMan supports hardware allocation and deallocation of buffers belonging to pools
-originally created by software with configurable depletion thresholds. This
-binding covers the CCSR space programming model
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,bman"
-			May include "fsl,<SoC>-bman"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Registers region within the CCSR address space
-
-The BMan revision information is located in the BMAN_IP_REV_1/2 registers which
-are located at offsets 0xbf8 and 0xbfc
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property. The error interrupt
-
-- fsl,bman-portals
-	Usage:		Required
-	Value type:	<phandle>
-	Definition:	Phandle to this BMan instance's portals
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	PAMU property used for static LIODN assignment
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-	For additional details about the PAMU/LIODN binding(s) see pamu.txt
-
-Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
-to the respective BMan instance
-
-- fsl,bman
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Description:	List of phandle and DCP index pairs, to the BMan instance
-			to which this device is connected via the DCP
-
-BMan Private Memory Node
-
-BMan requires a contiguous range of physical memory used for the backing store
-for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
-a node under the /reserved-memory node.
-
-The BMan FBPR memory node must be named "bman-fbpr"
-
-PROPERTIES
-
-- compatible
-	Usage:		required
-	Value type:	<stringlist>
-	Definition:	PPC platforms: Must include "fsl,bman-fbpr"
-			ARM platforms: Must include "shared-dma-pool"
-				       as well as the "no-map" property
-
-The following constraints are relevant to the FBPR private memory:
-	- The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to
-	  16 GiB
-	- The alignment must be a muliptle of the memory size
-
-The size of the FBPR must be chosen by observing the hardware features configured
-via the Reset Configuration Word (RCW) and that are relevant to a specific board
-(e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports,
-etc.). The size configured in the DT must reflect the hardware capabilities and
-not the specific needs of an application
-
-For additional details about reserved memory regions see reserved-memory.txt
-
-EXAMPLE
-
-The example below shows a BMan FBPR dynamic allocation memory node
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		bman_fbpr: bman-fbpr {
-			compatible = "shared-mem-pool";
-			size = <0 0x1000000>;
-			alignment = <0 0x1000000>;
-			no-map;
-		};
-	};
-
-The example below shows a (P4080) BMan CCSR-space node
-
-	bportals: bman-portals@ff4000000 {
-		...
-	};
-
-	crypto@300000 {
-		...
-		fsl,bman = <&bman, 2>;
-		...
-	};
-
-	bman: bman@31a000 {
-		compatible = "fsl,bman";
-		reg = <0x31a000 0x1000>;
-		interrupts = <16 2 1 2>;
-		fsl,liodn = <0x17>;
-		fsl,bman-portals = <&bportals>;
-		memory-region = <&bman_fbpr>;
-	};
-
-	fman@400000 {
-		...
-		fsl,bman = <&bman, 0>;
-		...
-	};
diff --git a/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml
new file mode 100644
index 00000000000..53b07d4edc7
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Firmware Node
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  This node defines a firmware binary that is embedded in the device tree, for
+  the purpose of passing the firmware from bootloader to the kernel, or from
+  the hypervisor to the guest.
+
+  The firmware node itself contains the firmware binary contents, a compatible
+  property, and any firmware-specific properties.  The node should be placed
+  inside a QE node that needs it.  Doing so eliminates the need for a
+  fsl,firmware-phandle property.  Other QE nodes that need the same firmware
+  should define an fsl,firmware-phandle property that points to the firmware node
+  in the first QE node.
+
+  The fsl,firmware property can be specified in the DTS (possibly using incbin)
+  or can be inserted by the boot loader at boot time.
+
+properties:
+  compatible:
+    enum:
+      - fsl,qe-firmware
+
+  fsl,firmware:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      A standard property.  This property contains the firmware binary "blob".
+
+required:
+  - compatible
+  - fsl,firmware
+
+additionalProperties: false
+
+examples:
+  - |
+    qe-firmware {
+        compatible = "fsl,qe-firmware";
+        fsl,firmware = <0x70 0xcd 0x00 0x00 0x01 0x46 0x45>;
+    };
diff --git a/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml
new file mode 100644
index 00000000000..8267ad00727
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Interrupt Controller (IC)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,qe-ic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: QE interrupt
+      - description: QE critical
+      - description: QE error
+    minItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@80 {
+        compatible = "fsl,qe-ic";
+        reg = <0x80 0x80>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        interrupts = <95 2 0 0  94 2 0 0>;
+    };
diff --git a/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
new file mode 100644
index 00000000000..cf0f38dbbe0
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-muram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine Multi-User RAM (MURAM)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: Multi-User RAM (MURAM)
+
+properties:
+  compatible:
+    items:
+      - const: fsl,qe-muram
+      - const: fsl,cpm-muram
+
+  ranges:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, slave]
+
+
+patternProperties:
+  '^data\-only@[a-f0-9]+$':
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: fsl,qe-muram-data
+          - const: fsl,cpm-muram-data
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    muram@10000 {
+        compatible = "fsl,qe-muram", "fsl,cpm-muram";
+        ranges = <0 0x00010000 0x0000c000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        data-only@0{
+            compatible = "fsl,qe-muram-data",
+                         "fsl,cpm-muram-data";
+            reg = <0 0xc000>;
+        };
+     };
diff --git a/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml
new file mode 100644
index 00000000000..8e58ab58c06
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-si.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Serial Interface Block (SI)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The SI manages the routing of eight TDM lines to the QE block serial drivers,
+  the MCC and the UCCs, for receive and transmit.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1043-qe-si
+          - const: fsl,t1040-qe-si
+      - enum:
+          - fsl,t1040-qe-si
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    si@700 {
+        compatible = "fsl,t1040-qe-si";
+        reg = <0x700 0x80>;
+    };
diff --git a/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml
new file mode 100644
index 00000000000..cc4ed48d786
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-siram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Serial Interface Block RAM(SIRAM)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  store the routing entries of SI
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1043-qe-siram
+          - const: fsl,t1040-qe-siram
+      - const: fsl,t1040-qe-siram
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    siram@1000 {
+        compatible = "fsl,t1040-qe-siram";
+        reg = <0x1000 0x800>;
+    };
+
diff --git a/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe.yaml b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe.yaml
new file mode 100644
index 00000000000..89cdf5e1d0a
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/cpm_qe/fsl,qe.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module (QE)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  This represents qe module that is installed on PowerQUICC II Pro.
+
+  NOTE:  This is an interim binding; it should be updated to fit
+  in with the CPM binding later in this document.
+
+  Basically, it is a bus of devices, that could act more or less
+  as a complete entity (UCC, USB etc ). All of them should be siblings on
+  the "root" qe node, using the common properties from there.
+  The description below applies to the qe of MPC8360 and
+  more nodes and properties would be extended in the future.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,qe
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [QE, CPM, CPM2]
+
+  bus-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the clock frequency for QUICC Engine.
+
+  fsl,qe-num-riscs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: define how many RISC engines the QE has.
+
+  fsl,qe-snums:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 28
+    description:
+      defining the array of serial number (SNUM) values for the virtual
+      threads.
+
+  fsl,firmware-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      required only if there is no fsl,qe-firmware child node
+
+      Points to a firmware node (see "QE Firmware Node" below)
+      that contains the firmware that should be uploaded for this QE.
+      The compatible property for the firmware node should say,
+      "fsl,qe-firmware".
+
+  brg-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      the internal clock source frequency for baud-rate
+      generators in Hz.
+
+  fsl,qe-num-snums:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description: |
+      define how many serial number(SNUM) the QE can use
+      for the threads. Use fsl,qe-snums instead to not only specify the
+      number of snums, but also their values.
+
+patternProperties:
+  '^muram@[a-f0-9]+$':
+    $ref: fsl,qe-muram.yaml
+
+  '^interrupt-controller@[a-f0-9]+$':
+    $ref: fsl,qe-ic.yaml
+
+  '^si@[a-f0-9]+$':
+    $ref: fsl,qe-si.yaml
+
+  '^siram@[a-f0-9]+$':
+    $ref: fsl,qe-siram.yaml
+
+required:
+  - compatible
+  - reg
+  - bus-frequency
+
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    qe-bus@e0100000 {
+        compatible = "fsl,qe", "simple-bus";
+        reg = <0xe0100000 0x480>;
+        ranges = <0 0xe0100000 0x00100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        brg-frequency = <0>;
+        bus-frequency = <0x179a7b00>;
+        fsl,qe-snums = /bits/ 8 <
+            0x04 0x05 0x0c 0x0d 0x14 0x15 0x1c 0x1d
+            0x24 0x25 0x2c 0x2d 0x34 0x35 0x88 0x89
+            0x98 0x99 0xa8 0xa9 0xb8 0xb9 0xc8 0xc9
+            0xd8 0xd9 0xe8 0xe9>;
+
+        interrupt-controller@80 {
+            compatible = "fsl,qe-ic";
+            reg = <0x80 0x80>;
+            #interrupt-cells = <1>;
+            interrupt-controller;
+            interrupts = <95 2 0 0  94 2 0 0>;
+        };
+
+        si@700 {
+            compatible = "fsl,t1040-qe-si";
+            reg = <0x700 0x80>;
+        };
+
+        siram@1000 {
+          compatible = "fsl,t1040-qe-siram";
+          reg = <0x1000 0x800>;
+        };
+
+        muram@10000 {
+            compatible = "fsl,qe-muram", "fsl,cpm-muram";
+            ranges = <0 0x00010000 0x0000c000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+              data-only@0{
+                  compatible = "fsl,qe-muram-data",
+                              "fsl,cpm-muram-data";
+                  reg = <0 0xc000>;
+              };
+        };
+    };
diff --git a/dts/upstream/Bindings/soc/fsl/cpm_qe/qe.txt b/dts/upstream/Bindings/soc/fsl/cpm_qe/qe.txt
deleted file mode 100644
index 05ec2a838c5..00000000000
--- a/dts/upstream/Bindings/soc/fsl/cpm_qe/qe.txt
+++ /dev/null
@@ -1,178 +0,0 @@
-* Freescale QUICC Engine module (QE)
-This represents qe module that is installed on PowerQUICC II Pro.
-
-NOTE:  This is an interim binding; it should be updated to fit
-in with the CPM binding later in this document.
-
-Basically, it is a bus of devices, that could act more or less
-as a complete entity (UCC, USB etc ). All of them should be siblings on
-the "root" qe node, using the common properties from there.
-The description below applies to the qe of MPC8360 and
-more nodes and properties would be extended in the future.
-
-i) Root QE device
-
-Required properties:
-- compatible : should be "fsl,qe";
-- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
-- reg : offset and length of the device registers.
-- bus-frequency : the clock frequency for QUICC Engine.
-- fsl,qe-num-riscs: define how many RISC engines the QE has.
-- fsl,qe-snums: This property has to be specified as '/bits/ 8' value,
-  defining the array of serial number (SNUM) values for the virtual
-  threads.
-
-Optional properties:
-- fsl,firmware-phandle:
-    Usage: required only if there is no fsl,qe-firmware child node
-    Value type: <phandle>
-    Definition: Points to a firmware node (see "QE Firmware Node" below)
-        that contains the firmware that should be uploaded for this QE.
-        The compatible property for the firmware node should say,
-        "fsl,qe-firmware".
-
-Recommended properties
-- brg-frequency : the internal clock source frequency for baud-rate
-  generators in Hz.
-
-Deprecated properties
-- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use
-  for the threads. Use fsl,qe-snums instead to not only specify the
-  number of snums, but also their values.
-
-Example:
-     qe@e0100000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	#interrupt-cells = <2>;
-	compatible = "fsl,qe";
-	ranges = <0 e0100000 00100000>;
-	reg = <e0100000 480>;
-	brg-frequency = <0>;
-	bus-frequency = <179A7B00>;
-	fsl,qe-snums = /bits/ 8 <
-		0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D
-		0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89
-		0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9
-		0xD8 0xD9 0xE8 0xE9>;
-     }
-
-* Multi-User RAM (MURAM)
-
-Required properties:
-- compatible : should be "fsl,qe-muram", "fsl,cpm-muram".
-- mode : the could be "host" or "slave".
-- ranges : Should be defined as specified in 1) to describe the
-   translation of MURAM addresses.
-- data-only : sub-node which defines the address area under MURAM
-   bus that can be allocated as data/parameter
-
-Example:
-
-     muram@10000 {
-	compatible = "fsl,qe-muram", "fsl,cpm-muram";
-	ranges = <0 00010000 0000c000>;
-
-	data-only@0{
-		compatible = "fsl,qe-muram-data",
-			     "fsl,cpm-muram-data";
-		reg = <0 c000>;
-	};
-     };
-
-* Interrupt Controller (IC)
-
-Required properties:
-- compatible : should be "fsl,qe-ic".
-- reg : Address range of IC register set.
-- interrupts : interrupts generated by the device.
-- interrupt-controller : this device is a interrupt controller.
-
-Example:
-
-	qeic: interrupt-controller@80 {
-		interrupt-controller;
-		compatible = "fsl,qe-ic";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x80 0x80>;
-		interrupts = <95 2 0 0  94 2 0 0>;
-	};
-
-* Serial Interface Block (SI)
-
-The SI manages the routing of eight TDM lines to the QE block serial drivers
-, the MCC and the UCCs, for receive and transmit.
-
-Required properties:
-- compatible : must be "fsl,<chip>-qe-si". For t1040, must contain
-  "fsl,t1040-qe-si".
-- reg : Address range of SI register set.
-
-Example:
-
-	si1: si@700 {
-		compatible = "fsl,t1040-qe-si";
-		reg = <0x700 0x80>;
-	};
-
-* Serial Interface Block RAM(SIRAM)
-
-store the routing entries of SI
-
-Required properties:
-- compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain
-  "fsl,t1040-qe-siram".
-- reg : Address range of SI RAM.
-
-Example:
-
-	siram1: siram@1000 {
-		compatible = "fsl,t1040-qe-siram";
-		reg = <0x1000 0x800>;
-	};
-
-* QE Firmware Node
-
-This node defines a firmware binary that is embedded in the device tree, for
-the purpose of passing the firmware from bootloader to the kernel, or from
-the hypervisor to the guest.
-
-The firmware node itself contains the firmware binary contents, a compatible
-property, and any firmware-specific properties.  The node should be placed
-inside a QE node that needs it.  Doing so eliminates the need for a
-fsl,firmware-phandle property.  Other QE nodes that need the same firmware
-should define an fsl,firmware-phandle property that points to the firmware node
-in the first QE node.
-
-The fsl,firmware property can be specified in the DTS (possibly using incbin)
-or can be inserted by the boot loader at boot time.
-
-Required properties:
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: A standard property.  Specify a string that indicates what
-          kind of firmware it is.  For QE, this should be "fsl,qe-firmware".
-
-   - fsl,firmware
-      Usage: required
-      Value type: <prop-encoded-array>, encoded as an array of bytes
-      Definition: A standard property.  This property contains the firmware
-          binary "blob".
-
-Example:
-	qe1@e0080000 {
-		compatible = "fsl,qe";
-		qe_firmware:qe-firmware {
-			compatible = "fsl,qe-firmware";
-			fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
-		};
-		...
-	};
-
-	qe2@e0090000 {
-		compatible = "fsl,qe";
-		fsl,firmware-phandle = <&qe_firmware>;
-		...
-	};
diff --git a/dts/upstream/Bindings/soc/fsl/fsl,bman-portal.yaml b/dts/upstream/Bindings/soc/fsl/fsl,bman-portal.yaml
new file mode 100644
index 00000000000..8dce75bebff
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/fsl,bman-portal.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,bman-portal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager Portals
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  QorIQ DPAA Buffer Manager Portal
+
+  Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
+  interaction by software running on processor cores, accelerators and network
+  interfaces with the BMan
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,bman-portal
+      - items:
+          - enum:
+              - fsl,bman-portal-1.0.0
+              - fsl,ls1043a-bmap-portal
+              - fsl,ls1046a-bmap-portal
+          - const: fsl,bman-portal
+  reg:
+    items:
+      - description: the cache-enabled region of the portal
+      - description: the cache-inhibited region of the portal
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bman-portal@0 {
+        compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+        reg = <0x0 0x4000>, <0x100000 0x1000>;
+        interrupts = <105 IRQ_TYPE_EDGE_FALLING 0 0>;
+    };
diff --git a/dts/upstream/Bindings/soc/fsl/fsl,bman.yaml b/dts/upstream/Bindings/soc/fsl/fsl,bman.yaml
new file mode 100644
index 00000000000..e6f468264b8
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/fsl,bman.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,bman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Buffer Manager
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
+  BMan supports hardware allocation and deallocation of buffers belonging to
+  pools originally created by software with configurable depletion thresholds.
+  This binding covers the CCSR space programming model
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,bman
+      - items:
+          - enum:
+              - fsl,ls1043a-bman
+              - fsl,ls1046a-bman
+          - const: fsl,bman
+
+  reg:
+    items:
+      - description: |
+          Registers region within the CCSR address space
+
+          The BMan revision information is located in the BMAN_IP_REV_1/2
+          registers which are located at offsets 0xbf8 and 0xbfc
+
+  interrupts:
+    items:
+      - description: The error interrupt
+
+  memory-region:
+    minItems: 1
+    maxItems: 2
+    description:
+      List of phandles referencing the BMan private memory
+      nodes (described below). The bman-fqd node must be
+      first followed by bman-pfdr node. Only used on ARM
+
+      Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
+      to the respective BMan instance
+
+  fsl,bman-portals:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: ref fsl,bman-port.yaml
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      See pamu.txt, PAMU property used for static LIODN assignment
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bman@31a000 {
+        compatible = "fsl,bman";
+        reg = <0x31a000 0x1000>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 2>;
+        fsl,liodn = <0x17>;
+        fsl,bman-portals = <&bportals>;
+        memory-region = <&bman_fbpr>;
+    };
diff --git a/dts/upstream/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/dts/upstream/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
index ce1a6505eb5..3fb0534ea59 100644
--- a/dts/upstream/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
+++ b/dts/upstream/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
@@ -8,7 +8,6 @@ title: Freescale Layerscape Device Configuration Unit
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Li Yang <leoyang.li@nxp.com>
 
 description: |
   DCFG is the device configuration unit, that provides general purpose
diff --git a/dts/upstream/Bindings/soc/fsl/fsl,layerscape-scfg.yaml b/dts/upstream/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
index a6a511b00a1..2a456c8af99 100644
--- a/dts/upstream/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
+++ b/dts/upstream/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
@@ -8,7 +8,6 @@ title: Freescale Layerscape Supplemental Configuration Unit
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Li Yang <leoyang.li@nxp.com>
 
 description: |
   SCFG is the supplemental configuration unit, that provides SoC specific
diff --git a/dts/upstream/Bindings/soc/fsl/fsl,ls1028a-reset.yaml b/dts/upstream/Bindings/soc/fsl/fsl,ls1028a-reset.yaml
new file mode 100644
index 00000000000..31295be9101
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/fsl,ls1028a-reset.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas//soc/fsl/fsl,ls1028a-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Reset Registers Module
+
+maintainers:
+  - Frank Li
+
+description:
+  Reset Module includes chip reset, service processor control and Reset Control
+  Word (RCW) status.
+
+properties:
+  $nodename:
+    pattern: "^syscon@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - fsl,ls1028a-reset
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+
+  reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reboot
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1e60000 {
+        compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd";
+        reg = <0x1e60000 0x10000>;
+        little-endian;
+
+        reboot {
+            compatible = "syscon-reboot";
+            offset = <0>;
+            mask = <0x02>;
+        };
+    };
+
diff --git a/dts/upstream/Bindings/soc/fsl/fsl,qman-fqd.yaml b/dts/upstream/Bindings/soc/fsl/fsl,qman-fqd.yaml
new file mode 100644
index 00000000000..de0b4ae740f
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/fsl,qman-fqd.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-fqd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QMan Private Memory Nodes
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  QMan requires two contiguous range of physical memory used for the backing store
+  for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
+  This memory is reserved/allocated as a node under the /reserved-memory node.
+
+  BMan requires a contiguous range of physical memory used for the backing store
+  for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
+  a node under the /reserved-memory node.
+
+  The QMan FQD memory node must be named "qman-fqd"
+  The QMan PFDR memory node must be named "qman-pfdr"
+  The BMan FBPR memory node must be named "bman-fbpr"
+
+  The following constraints are relevant to the FQD and PFDR private memory:
+    - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
+      1 GiB
+    - The alignment must be a muliptle of the memory size
+
+  The size of the FQD and PFDP must be chosen by observing the hardware features
+  configured via the Reset Configuration Word (RCW) and that are relevant to a
+  specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
+  FMan ports, etc.). The size configured in the DT must reflect the hardware
+  capabilities and not the specific needs of an application
+
+  For additional details about reserved memory regions see
+  reserved-memory/reserved-memory.yaml in dtschema project.
+
+properties:
+  $nodename:
+    pattern: '^(qman-fqd|qman-pfdr|bman-fbpr)+$'
+
+  compatible:
+    enum:
+      - fsl,qman-fqd
+      - fsl,qman-pfdr
+      - fsl,bman-fbpr
+
+required:
+  - compatible
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qman-fqd {
+            compatible = "shared-dma-pool";
+            size = <0 0x400000>;
+            alignment = <0 0x400000>;
+            no-map;
+        };
+    };
diff --git a/dts/upstream/Bindings/soc/fsl/fsl,qman-portal.yaml b/dts/upstream/Bindings/soc/fsl/fsl,qman-portal.yaml
new file mode 100644
index 00000000000..17016184143
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/fsl,qman-portal.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-portal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager Portals
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
+  interaction by software running on processor cores, accelerators and network
+  interfaces with the QMan
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,qman-portal
+      - items:
+          - enum:
+              - fsl,ls1043-qman-portal
+              - fsl,ls1046-qman-portal
+              - fsl,qman-portal-1.2.0
+          - const: fsl,qman-portal
+
+  reg:
+    items:
+      - description: the cache-enabled region of the portal
+      - description: the cache-inhibited region of the portal
+
+  interrupts:
+    maxItems: 1
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: See pamu.txt. Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
+      (FLIODN)
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: See pamu.txt.
+
+  fsl,qman-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: qman channel id.
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The hardware index of the channel. This can also be
+      determined by dividing any of the channel's 8 work queue
+      IDs by 8
+
+      In addition to these properties the qman-portals should have sub-nodes to
+      represent the HW devices/portals that are connected to the software portal
+      described here
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+patternProperties:
+  '^(fman0|fman1|pme|crypto)+$':
+    type: object
+    properties:
+      fsl,liodn:
+        description: See pamu.txt, PAMU property used for static LIODN assignment
+
+      fsl,iommu-parent:
+        description: See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+      dev-handle:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          The phandle to the particular hardware device that this
+          portal is connected to.
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qman-portal@0 {
+        compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+        reg = <0 0x4000>, <0x100000 0x1000>;
+        interrupts = <104 IRQ_TYPE_EDGE_FALLING 0 0>;
+        fsl,liodn = <1 2>;
+        fsl,qman-channel-id = <0>;
+
+        fman0 {
+            fsl,liodn = <0x21>;
+            dev-handle = <&fman0>;
+        };
+
+        fman1 {
+            fsl,liodn = <0xa1>;
+            dev-handle = <&fman1>;
+        };
+
+        crypto {
+            fsl,liodn = <0x41 0x66>;
+            dev-handle = <&crypto>;
+        };
+    };
diff --git a/dts/upstream/Bindings/soc/fsl/fsl,qman.yaml b/dts/upstream/Bindings/soc/fsl/fsl,qman.yaml
new file mode 100644
index 00000000000..501f06e190c
--- /dev/null
+++ b/dts/upstream/Bindings/soc/fsl/fsl,qman.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
+  supports queuing and QoS scheduling of frames to CPUs, network interfaces and
+  DPAA logic modules, maintains packet ordering within flows. Besides providing
+  flow-level queuing, is also responsible for congestion management functions such
+  as RED/WRED, congestion notifications and tail discards. This binding covers the
+  CCSR space programming model
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,qman
+      - items:
+          - enum:
+              - fsl,ls1043a-qman
+              - fsl,ls1046a-qman
+          - const: fsl,qman
+  reg:
+    items:
+      - description: |
+          Registers region within the CCSR address space
+
+          The QMan revision information is located in the QMAN_IP_REV_1/2
+          registers which are located at offsets 0xbf8 and 0xbfc
+
+  interrupts:
+    items:
+      - description: The error interrupt
+
+  fsl,qman-portals:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: ref fsl,qman-port.yaml
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      See pamu.txt, PAMU property used for static LIODN assignment
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+  clocks:
+    maxItems: 1
+    description:
+      Reference input clock. Its frequency is half of the platform clock
+
+  memory-region:
+    maxItems: 2
+    description:
+      List of phandles referencing the QMan private memory nodes (described
+      below). The qman-fqd node must be first followed by qman-pfdr node.
+      Only used on ARM Devices connected to a QMan instance via Direct Connect
+      Portals (DCP) must link to the respective QMan instance.
+
+  fsl,qman:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      List of phandle and DCP index pairs, to the QMan instance
+      to which this device is connected via the DCP
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qman: qman@318000 {
+        compatible = "fsl,qman";
+        reg = <0x318000 0x1000>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 3>;
+        fsl,liodn = <0x16>;
+        fsl,qman-portals = <&qportals>;
+        memory-region = <&qman_fqd &qman_pfdr>;
+        clocks = <&platform_pll 1>;
+    };
diff --git a/dts/upstream/Bindings/soc/fsl/qman-portals.txt b/dts/upstream/Bindings/soc/fsl/qman-portals.txt
deleted file mode 100644
index 5a34f3ab7be..00000000000
--- a/dts/upstream/Bindings/soc/fsl/qman-portals.txt
+++ /dev/null
@@ -1,134 +0,0 @@
-QorIQ DPAA Queue Manager Portals Device Tree Binding
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- QMan Portal
-	- Example
-
-QMan Portal Node
-
-Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
-interaction by software running on processor cores, accelerators and network
-interfaces with the QMan
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,qman-portal-<hardware revision>"
-			May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Two regions. The first is the cache-enabled region of
-			the portal. The second is the cache-inhibited region of
-			the portal
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
-			(FLIODN)
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-	For additional details about the PAMU/LIODN binding(s) see pamu.txt
-
-- cell-index
-	Usage:		Required
-	Value type:	<u32>
-	Definition:	The hardware index of the channel. This can also be
-			determined by dividing any of the channel's 8 work queue
-			IDs by 8
-
-In addition to these properties the qman-portals should have sub-nodes to
-represent the HW devices/portals that are connected to the software portal
-described here
-
-The currently supported sub-nodes are:
-	* fman0
-	* fman1
-	* pme
-	* crypto
-
-These subnodes should have the following properties:
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	PAMU property used for static LIODN assignment
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-- dev-handle
-	Usage:		Required
-	Value type:	<phandle>
-	Definition:	The phandle to the particular hardware device that this
-			portal is connected to.
-
-EXAMPLE
-
-The example below shows a (P4080) QMan portals container/bus node with two portals
-
-	qman-portals@ff4200000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0xf 0xf4200000 0x200000>;
-
-		qman-portal@0 {
-			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
-			reg = <0 0x4000>, <0x100000 0x1000>;
-			interrupts = <104 2 0 0>;
-			fsl,liodn = <1 2>;
-			fsl,qman-channel-id = <0>;
-
-			fman0 {
-				fsl,liodn = <0x21>;
-				dev-handle = <&fman0>;
-			};
-			fman1 {
-				fsl,liodn = <0xa1>;
-				dev-handle = <&fman1>;
-			};
-			crypto {
-				fsl,liodn = <0x41 0x66>;
-				dev-handle = <&crypto>;
-			};
-		};
-		qman-portal@4000 {
-			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
-			reg = <0x4000 0x4000>, <0x101000 0x1000>;
-			interrupts = <106 2 0 0>;
-			fsl,liodn = <3 4>;
-			cell-index = <1>;
-
-			fman0 {
-				fsl,liodn = <0x22>;
-				dev-handle = <&fman0>;
-			};
-			fman1 {
-				fsl,liodn = <0xa2>;
-				dev-handle = <&fman1>;
-			};
-			crypto {
-				fsl,liodn = <0x42 0x67>;
-				dev-handle = <&crypto>;
-			};
-		};
-	};
diff --git a/dts/upstream/Bindings/soc/fsl/qman.txt b/dts/upstream/Bindings/soc/fsl/qman.txt
deleted file mode 100644
index ee96afd2af7..00000000000
--- a/dts/upstream/Bindings/soc/fsl/qman.txt
+++ /dev/null
@@ -1,187 +0,0 @@
-QorIQ DPAA Queue Manager Device Tree Binding
-
-Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
-
-CONTENTS
-
-	- QMan Node
-	- QMan Private Memory Nodes
-	- Example
-
-QMan Node
-
-The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
-supports queuing and QoS scheduling of frames to CPUs, network interfaces and
-DPAA logic modules, maintains packet ordering within flows. Besides providing
-flow-level queuing, is also responsible for congestion management functions such
-as RED/WRED, congestion notifications and tail discards. This binding covers the
-CCSR space programming model
-
-PROPERTIES
-
-- compatible
-	Usage:		Required
-	Value type:	<stringlist>
-	Definition:	Must include "fsl,qman"
-			May include "fsl,<SoC>-qman"
-
-- reg
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Registers region within the CCSR address space
-
-The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
-are located at offsets 0xbf8 and 0xbfc
-
-- interrupts
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Definition:	Standard property. The error interrupt
-
-- fsl,qman-portals
-	Usage:		Required
-	Value type:	<phandle>
-	Definition:	Phandle to this QMan instance's portals
-
-- fsl,liodn
-	Usage:		See pamu.txt
-	Value type:	<prop-encoded-array>
-	Definition:	PAMU property used for static LIODN assignment
-
-- fsl,iommu-parent
-	Usage:		See pamu.txt
-	Value type:	<phandle>
-	Definition:	PAMU property used for dynamic LIODN assignment
-
-	For additional details about the PAMU/LIODN binding(s) see pamu.txt
-
-- clocks
-	Usage:		See clock-bindings.txt and qoriq-clock.txt
-	Value type:	<prop-encoded-array>
-	Definition:	Reference input clock. Its frequency is half of the
-			platform clock
-- memory-regions
-	Usage:		Required for ARM
-	Value type:	<phandle array>
-	Definition:	List of phandles referencing the QMan private memory
-			nodes (described below). The qman-fqd node must be
-			first followed by qman-pfdr node. Only used on ARM
-
-Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
-to the respective QMan instance
-
-- fsl,qman
-	Usage:		Required
-	Value type:	<prop-encoded-array>
-	Description:	List of phandle and DCP index pairs, to the QMan instance
-			to which this device is connected via the DCP
-
-QMan Private Memory Nodes
-
-QMan requires two contiguous range of physical memory used for the backing store
-for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
-This memory is reserved/allocated as a node under the /reserved-memory node.
-
-For additional details about reserved memory regions see reserved-memory.txt
-
-The QMan FQD memory node must be named "qman-fqd"
-
-PROPERTIES
-
-- compatible
-	Usage:		required
-	Value type:	<stringlist>
-	Definition:	PPC platforms: Must include "fsl,qman-fqd"
-			ARM platforms: Must include "shared-dma-pool"
-				       as well as the "no-map" property
-
-The QMan PFDR memory node must be named "qman-pfdr"
-
-PROPERTIES
-
-- compatible
-	Usage:		required
-	Value type:	<stringlist>
-	Definition:	PPC platforms: Must include "fsl,qman-pfdr"
-			ARM platforms: Must include "shared-dma-pool"
-				       as well as the "no-map" property
-
-The following constraints are relevant to the FQD and PFDR private memory:
-	- The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
-	  1 GiB
-	- The alignment must be a muliptle of the memory size
-
-The size of the FQD and PFDP must be chosen by observing the hardware features
-configured via the Reset Configuration Word (RCW) and that are relevant to a
-specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
-FMan ports, etc.). The size configured in the DT must reflect the hardware
-capabilities and not the specific needs of an application
-
-For additional details about reserved memory regions see reserved-memory.txt
-
-EXAMPLE
-
-The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		qman_fqd: qman-fqd {
-			compatible = "shared-dma-pool";
-			size = <0 0x400000>;
-			alignment = <0 0x400000>;
-			no-map;
-		};
-		qman_pfdr: qman-pfdr {
-			compatible = "shared-dma-pool";
-			size = <0 0x2000000>;
-			alignment = <0 0x2000000>;
-			no-map;
-		};
-	};
-
-The example below shows a (P4080) QMan CCSR-space node
-
-	qportals: qman-portals@ff4200000 {
-		...
-	};
-
-	clockgen: global-utilities@e1000 {
-		...
-		sysclk: sysclk {
-			...
-		};
-		...
-		platform_pll: platform-pll@c00 {
-			#clock-cells = <1>;
-			reg = <0xc00 0x4>;
-			compatible = "fsl,qoriq-platform-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "platform-pll", "platform-pll-div2";
-		};
-		...
-	};
-
-	crypto@300000 {
-		...
-		fsl,qman = <&qman, 2>;
-		...
-	};
-
-	qman: qman@318000 {
-		compatible = "fsl,qman";
-		reg = <0x318000 0x1000>;
-		interrupts = <16 2 1 3>
-		fsl,liodn = <0x16>;
-		fsl,qman-portals = <&qportals>;
-		memory-region = <&qman_fqd &qman_pfdr>;
-		clocks = <&platform_pll 1>;
-	};
-
-	fman@400000 {
-		...
-		fsl,qman = <&qman, 0>;
-		...
-	};
diff --git a/dts/upstream/Bindings/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml b/dts/upstream/Bindings/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml
new file mode 100644
index 00000000000..5c77c4925d1
--- /dev/null
+++ b/dts/upstream/Bindings/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin 960 USB OTG Battery Charging Syscon
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hi3660-usb3-otg-bc
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  usb-phy:
+    $ref: /schemas/phy/hisilicon,hi3660-usb3.yaml
+    description: USB Phy node
+
+required:
+  - compatible
+  - reg
+  - usb-phy
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@ff200000 {
+        compatible = "hisilicon,hi3660-usb3-otg-bc", "syscon", "simple-mfd";
+        reg = <0xff200000 0x1000>;
+
+        usb-phy {
+            compatible = "hisilicon,hi3660-usb-phy";
+            #phy-cells = <0>;
+            hisilicon,pericrg-syscon = <&crg_ctrl>;
+            hisilicon,pctrl-syscon = <&pctrl>;
+            hisilicon,eye-diagram-param = <0x22466e4>;
+        };
+    };
diff --git a/dts/upstream/Bindings/soc/intel/intel,lgm-syscon.yaml b/dts/upstream/Bindings/soc/intel/intel,lgm-syscon.yaml
new file mode 100644
index 00000000000..6951d55356d
--- /dev/null
+++ b/dts/upstream/Bindings/soc/intel/intel,lgm-syscon.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/intel/intel,lgm-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain(LGM) Syscon
+
+maintainers:
+  - Chuanhua Lei <lchuanhua@maxlinear.com>
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+properties:
+  compatible:
+    items:
+      - const: intel,lgm-syscon
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^emmc-phy@[0-9a-f]+$":
+    $ref: /schemas/phy/intel,lgm-emmc-phy.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    chiptop@e0200000 {
+        compatible = "intel,lgm-syscon", "syscon";
+        reg = <0xe0200000 0x100>;
+        ranges = <0x0 0xe0200000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        emmc-phy@a8 {
+            compatible = "intel,lgm-emmc-phy";
+            reg = <0x00a8 0x10>;
+            clocks = <&emmc>;
+            #phy-cells = <0>;
+        };
+    };
diff --git a/dts/upstream/Bindings/soc/mediatek/mediatek,mutex.yaml b/dts/upstream/Bindings/soc/mediatek/mediatek,mutex.yaml
index ba2014a8725..a10326a9683 100644
--- a/dts/upstream/Bindings/soc/mediatek/mediatek,mutex.yaml
+++ b/dts/upstream/Bindings/soc/mediatek/mediatek,mutex.yaml
@@ -33,6 +33,7 @@ properties:
       - mediatek,mt8186-disp-mutex
       - mediatek,mt8186-mdp3-mutex
       - mediatek,mt8188-disp-mutex
+      - mediatek,mt8188-vpp-mutex
       - mediatek,mt8192-disp-mutex
       - mediatek,mt8195-disp-mutex
       - mediatek,mt8195-vpp-mutex
diff --git a/dts/upstream/Bindings/soc/microchip/microchip,sparx5-cpu-syscon.yaml b/dts/upstream/Bindings/soc/microchip/microchip,sparx5-cpu-syscon.yaml
new file mode 100644
index 00000000000..1f0b542d229
--- /dev/null
+++ b/dts/upstream/Bindings/soc/microchip/microchip,sparx5-cpu-syscon.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/microchip,sparx5-cpu-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 CPU Syscon
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+properties:
+  compatible:
+    items:
+      - const: microchip,sparx5-cpu-syscon
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  mux-controller:
+    $ref: /schemas/mux/reg-mux.yaml#
+
+required:
+  - compatible
+  - reg
+  - mux-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        syscon@600000000 {
+            compatible = "microchip,sparx5-cpu-syscon", "syscon",
+                         "simple-mfd";
+            reg = <0x6 0x00000000 0xd0>;
+
+            mux: mux-controller {
+                compatible = "mmio-mux";
+                #mux-control-cells = <1>;
+                mux-reg-masks = <0x88 0xf0>;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/soc/mobileye/mobileye,eyeq5-olb.yaml b/dts/upstream/Bindings/soc/mobileye/mobileye,eyeq5-olb.yaml
new file mode 100644
index 00000000000..f7e606d45eb
--- /dev/null
+++ b/dts/upstream/Bindings/soc/mobileye/mobileye,eyeq5-olb.yaml
@@ -0,0 +1,374 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mobileye/mobileye,eyeq5-olb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ SoC system controller
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+description:
+  OLB ("Other Logic Block") is a hardware block grouping smaller blocks. Clocks,
+  resets, pinctrl are being handled from here. EyeQ5 and EyeQ6L host a single
+  instance. EyeQ6H hosts seven instances.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mobileye,eyeq5-olb
+          - mobileye,eyeq6l-olb
+          - mobileye,eyeq6h-acc-olb
+          - mobileye,eyeq6h-central-olb
+          - mobileye,eyeq6h-east-olb
+          - mobileye,eyeq6h-west-olb
+          - mobileye,eyeq6h-south-olb
+          - mobileye,eyeq6h-ddr0-olb
+          - mobileye,eyeq6h-ddr1-olb
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      First cell is domain and optional if compatible has a single reset domain.
+      Second cell is reset index inside that domain.
+    enum: [ 1, 2 ]
+
+  '#clock-cells':
+    description:
+      Cell is clock index. Optional if compatible has a single clock.
+    enum: [ 0, 1 ]
+
+  clocks:
+    maxItems: 1
+    description:
+      Input parent clock to all PLLs. Expected to be the main crystal.
+
+  clock-names:
+    const: ref
+
+patternProperties:
+  '-pins?$':
+    type: object
+    description: Pin muxing configuration.
+    $ref: /schemas/pinctrl/pinmux-node.yaml#
+    additionalProperties: false
+    properties:
+      pins: true
+      function:
+        enum: [gpio,
+               # Bank A
+               timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
+               spi1, refclk0,
+               # Bank B
+               timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+    required:
+      - pins
+      - function
+    allOf:
+      - if:
+          properties:
+            function:
+              const: gpio
+        then:
+          properties:
+            pins:
+              items: # PA0 - PA28, PB0 - PB22
+                pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
+      - if:
+          properties:
+            function:
+              const: timer0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA0, PA1]
+      - if:
+          properties:
+            function:
+              const: timer1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA2, PA3]
+      - if:
+          properties:
+            function:
+              const: timer2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA4, PA5]
+      - if:
+          properties:
+            function:
+              const: timer5
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA6, PA7, PA8, PA9]
+      - if:
+          properties:
+            function:
+              const: uart0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA10, PA11]
+      - if:
+          properties:
+            function:
+              const: uart1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA12, PA13]
+      - if:
+          properties:
+            function:
+              const: can0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA14, PA15]
+      - if:
+          properties:
+            function:
+              const: can1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA16, PA17]
+      - if:
+          properties:
+            function:
+              const: spi0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA18, PA19, PA20, PA21, PA22]
+      - if:
+          properties:
+            function:
+              const: spi1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA23, PA24, PA25, PA26, PA27]
+      - if:
+          properties:
+            function:
+              const: refclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA28]
+      - if:
+          properties:
+            function:
+              const: timer3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB0, PB1]
+      - if:
+          properties:
+            function:
+              const: timer4
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB2, PB3]
+      - if:
+          properties:
+            function:
+              const: timer6
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB4, PB5, PB6, PB7]
+      - if:
+          properties:
+            function:
+              const: uart2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB8, PB9]
+      - if:
+          properties:
+            function:
+              const: can2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB10, PB11]
+      - if:
+          properties:
+            function:
+              const: spi2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB12, PB13, PB14, PB15, PB16]
+      - if:
+          properties:
+            function:
+              const: spi3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB17, PB18, PB19, PB20, PB21]
+      - if:
+          properties:
+            function:
+              const: mclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB22]
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+    # Compatibles exposing a single reset domain.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq6h-acc-olb
+              - mobileye,eyeq6h-east-olb
+              - mobileye,eyeq6h-west-olb
+    then:
+      properties:
+        '#reset-cells':
+          const: 1
+      required:
+        - '#reset-cells'
+
+    # Compatibles exposing two reset domains.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq5-olb
+              - mobileye,eyeq6l-olb
+    then:
+      properties:
+        '#reset-cells':
+          const: 2
+      required:
+        - '#reset-cells'
+
+    # Compatibles not exposing resets.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq6h-central-olb
+              - mobileye,eyeq6h-south-olb
+              - mobileye,eyeq6h-ddr0-olb
+              - mobileye,eyeq6h-ddr1-olb
+    then:
+      properties:
+        '#reset-cells': false
+
+    # Compatibles exposing a single clock.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq6h-central-olb
+              - mobileye,eyeq6h-east-olb
+              - mobileye,eyeq6h-west-olb
+              - mobileye,eyeq6h-ddr0-olb
+              - mobileye,eyeq6h-ddr1-olb
+    then:
+      properties:
+        '#clock-cells':
+          const: 0
+    else:
+      properties:
+        '#clock-cells':
+          const: 1
+
+    # Only EyeQ5 has pinctrl in OLB.
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: mobileye,eyeq5-olb
+    then:
+      patternProperties:
+        '-pins?$': false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      system-controller@e00000 {
+        compatible = "mobileye,eyeq5-olb", "syscon";
+        reg = <0 0xe00000 0x0 0x400>;
+        #reset-cells = <2>;
+        #clock-cells = <1>;
+        clocks = <&xtal>;
+        clock-names = "ref";
+      };
+    };
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      system-controller@d2003000 {
+        compatible = "mobileye,eyeq6h-acc-olb", "syscon";
+        reg = <0x0 0xd2003000 0x0 0x1000>;
+        #reset-cells = <1>;
+        #clock-cells = <1>;
+        clocks = <&xtal>;
+        clock-names = "ref";
+      };
+    };
diff --git a/dts/upstream/Bindings/soc/qcom/qcom,aoss-qmp.yaml b/dts/upstream/Bindings/soc/qcom/qcom,aoss-qmp.yaml
index b4478f417ed..7afdb60edb2 100644
--- a/dts/upstream/Bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/dts/upstream/Bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -31,6 +31,7 @@ properties:
           - qcom,sc7280-aoss-qmp
           - qcom,sc8180x-aoss-qmp
           - qcom,sc8280xp-aoss-qmp
+          - qcom,sdx75-aoss-qmp
           - qcom,sdm845-aoss-qmp
           - qcom,sm6350-aoss-qmp
           - qcom,sm8150-aoss-qmp
diff --git a/dts/upstream/Bindings/soc/qcom/qcom,rpm-master-stats.yaml b/dts/upstream/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
index 9410404f87f..ad2dcc39a5f 100644
--- a/dts/upstream/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
+++ b/dts/upstream/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats
 
 maintainers:
-  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   The Qualcomm RPM (Resource Power Manager) architecture includes a concept
diff --git a/dts/upstream/Bindings/soc/qcom/qcom,smp2p.yaml b/dts/upstream/Bindings/soc/qcom/qcom,smp2p.yaml
index 58500529b90..141d666dc3f 100644
--- a/dts/upstream/Bindings/soc/qcom/qcom,smp2p.yaml
+++ b/dts/upstream/Bindings/soc/qcom/qcom,smp2p.yaml
@@ -41,6 +41,7 @@ properties:
     description:
       Three entries specifying the outgoing ipc bit used for signaling the
       remote end of the smp2p edge.
+    deprecated: true
 
   qcom,local-pid:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -128,7 +129,7 @@ examples:
         compatible = "qcom,smp2p";
         qcom,smem = <431>, <451>;
         interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-        qcom,ipc = <&apcs 8 18>;
+        mboxes = <&apcs 18>;
         qcom,local-pid = <0>;
         qcom,remote-pid = <4>;
 
diff --git a/dts/upstream/Bindings/soc/qcom/qcom,smsm.yaml b/dts/upstream/Bindings/soc/qcom/qcom,smsm.yaml
index db67cf04325..4900215f26a 100644
--- a/dts/upstream/Bindings/soc/qcom/qcom,smsm.yaml
+++ b/dts/upstream/Bindings/soc/qcom/qcom,smsm.yaml
@@ -33,6 +33,14 @@ properties:
       specifier of the column in the subscription matrix representing the local
       processor.
 
+  mboxes:
+    minItems: 1
+    maxItems: 5
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client. Each entry represents the N:th remote processor by index
+      (0-indexed).
+
   '#size-cells':
     const: 0
 
@@ -47,6 +55,7 @@ patternProperties:
     description:
       Three entries specifying the outgoing ipc bit used for signaling the N:th
       remote processor.
+    deprecated: true
 
   "@[0-9a-f]$":
     type: object
@@ -98,15 +107,18 @@ required:
   - '#address-cells'
   - '#size-cells'
 
-anyOf:
-  - required:
-      - qcom,ipc-1
-  - required:
-      - qcom,ipc-2
-  - required:
-      - qcom,ipc-3
+oneOf:
   - required:
-      - qcom,ipc-4
+      - mboxes
+  - anyOf:
+      - required:
+          - qcom,ipc-1
+      - required:
+          - qcom,ipc-2
+      - required:
+          - qcom,ipc-3
+      - required:
+          - qcom,ipc-4
 
 additionalProperties: false
 
@@ -122,7 +134,7 @@ examples:
         compatible = "qcom,smsm";
         #address-cells = <1>;
         #size-cells = <0>;
-        qcom,ipc-3 = <&apcs 8 19>;
+        mboxes = <0>, <0>, <0>, <&apcs 19>;
 
         apps_smsm: apps@0 {
             reg = <0>;
diff --git a/dts/upstream/Bindings/soc/rockchip/grf.yaml b/dts/upstream/Bindings/soc/rockchip/grf.yaml
index 79798c74747..35b20e53b51 100644
--- a/dts/upstream/Bindings/soc/rockchip/grf.yaml
+++ b/dts/upstream/Bindings/soc/rockchip/grf.yaml
@@ -31,11 +31,17 @@ properties:
               - rockchip,rk3588-pcie3-pipe-grf
               - rockchip,rk3588-usb-grf
               - rockchip,rk3588-usbdpphy-grf
-              - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vo0-grf
+              - rockchip,rk3588-vo1-grf
               - rockchip,rk3588-vop-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
       - items:
+          - const: rockchip,rk3588-vo-grf
+          - const: syscon
+        deprecated: true
+        description: Use rockchip,rk3588-vo{0,1}-grf instead.
+      - items:
           - enum:
               - rockchip,px30-grf
               - rockchip,px30-pmugrf
@@ -176,9 +182,10 @@ allOf:
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 
       patternProperties:
-        "phy@[0-9a-f]+$":
-          description:
-            Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+        "^phy@[0-9a-f]+$":
+          type: object
+          $ref: /schemas/phy/rockchip,rk3399-emmc-phy.yaml#
+          unevaluatedProperties: false
 
   - if:
       properties:
@@ -261,6 +268,8 @@ allOf:
           contains:
             enum:
               - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vo0-grf
+              - rockchip,rk3588-vo1-grf
 
     then:
       required:
@@ -292,6 +301,15 @@ examples:
         #phy-cells = <0>;
       };
 
+      phy@f780 {
+        compatible = "rockchip,rk3399-emmc-phy";
+        reg = <0xf780 0x20>;
+        clocks = <&sdhci>;
+        clock-names = "emmcclk";
+        drive-impedance-ohm = <50>;
+        #phy-cells = <0>;
+      };
+
       u2phy0: usb2phy@e450 {
         compatible = "rockchip,rk3399-usb2phy";
         reg = <0xe450 0x10>;
diff --git a/dts/upstream/Bindings/soc/sprd/sprd,sc9863a-glbregs.yaml b/dts/upstream/Bindings/soc/sprd/sprd,sc9863a-glbregs.yaml
new file mode 100644
index 00000000000..49add564e5e
--- /dev/null
+++ b/dts/upstream/Bindings/soc/sprd/sprd,sc9863a-glbregs.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/sprd/sprd,sc9863a-glbregs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SC9863A Syscon
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: sprd,sc9863a-glbregs
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: /schemas/clock/sprd,sc9863a-clk.yaml
+    description: Clock controllers
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@20e00000 {
+      compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
+      reg = <0x20e00000 0x4000>;
+      ranges = <0 0x20e00000 0x4000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      apahb_gate: apahb-gate@0 {
+        compatible = "sprd,sc9863a-apahb-gate";
+        reg = <0x0 0x1020>;
+        #clock-cells = <1>;
+      };
+    };
+
+...
diff --git a/dts/upstream/Bindings/soc/sti/st,sti-syscon.yaml b/dts/upstream/Bindings/soc/sti/st,sti-syscon.yaml
index 5f97d9ff17f..fc933d70d13 100644
--- a/dts/upstream/Bindings/soc/sti/st,sti-syscon.yaml
+++ b/dts/upstream/Bindings/soc/sti/st,sti-syscon.yaml
@@ -30,6 +30,15 @@ properties:
   reg:
     maxItems: 1
 
+  sti-sasg-codec:
+    description: STi internal audio codec
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: st,stih407-sas-codec
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/soc/ti/sci-pm-domain.yaml b/dts/upstream/Bindings/soc/ti/sci-pm-domain.yaml
index a750035d623..b6da7203215 100644
--- a/dts/upstream/Bindings/soc/ti/sci-pm-domain.yaml
+++ b/dts/upstream/Bindings/soc/ti/sci-pm-domain.yaml
@@ -40,7 +40,7 @@ properties:
       TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts.
       Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions.
 
-      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      Please see https://software-dl.ti.com/tisci/esd/latest/index.html for
       protocol documentation for the values to be used for different devices.
 
 additionalProperties: false
diff --git a/dts/upstream/Bindings/soc/ti/ti,am654-serdes-ctrl.yaml b/dts/upstream/Bindings/soc/ti/ti,am654-serdes-ctrl.yaml
new file mode 100644
index 00000000000..a10a3b89ae0
--- /dev/null
+++ b/dts/upstream/Bindings/soc/ti/ti,am654-serdes-ctrl.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/ti,am654-serdes-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AM654 Serdes Control Syscon
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,am654-serdes-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  mux-controller:
+    $ref: /schemas/mux/reg-mux.yaml#
+
+required:
+  - compatible
+  - reg
+  - mux-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    clock@4080 {
+        compatible = "ti,am654-serdes-ctrl", "syscon";
+        reg = <0x4080 0x4>;
+
+        mux-controller {
+            compatible = "mmio-mux";
+            #mux-control-cells = <1>;
+            mux-reg-masks = <0x0 0x3>; /* lane select */
+        };
+    };
diff --git a/dts/upstream/Bindings/mfd/ti,j721e-system-controller.yaml b/dts/upstream/Bindings/soc/ti/ti,j721e-system-controller.yaml
index e6289fbe690..378e9cc5fac 100644
--- a/dts/upstream/Bindings/mfd/ti,j721e-system-controller.yaml
+++ b/dts/upstream/Bindings/soc/ti/ti,j721e-system-controller.yaml
@@ -2,7 +2,7 @@
 # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml#
+$id: http://devicetree.org/schemas/soc/ti/ti,j721e-system-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI J721e System Controller Registers R/W
@@ -19,7 +19,7 @@ description: |
   and access the registers directly.
 
 maintainers:
-  - Kishon Vijay Abraham I <kishon@ti.com>
+  - Kishon Vijay Abraham I <kishon@kernel.org>
   - Roger Quadros <rogerq@kernel.org>
 
 properties:
diff --git a/dts/upstream/Bindings/sound/ak4104.txt b/dts/upstream/Bindings/sound/ak4104.txt
deleted file mode 100644
index ae5f7f057dc..00000000000
--- a/dts/upstream/Bindings/sound/ak4104.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-AK4104 S/PDIF transmitter
-
-This device supports SPI mode only.
-
-Required properties:
-
-  - compatible : "asahi-kasei,ak4104"
-
-  - reg : The chip select number on the SPI bus
-
-  - vdd-supply : A regulator node, providing 2.7V - 3.6V
-
-Optional properties:
-
-  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
-		  deasserted before communication to the device starts.
-
-Example:
-
-spdif: ak4104@0 {
-	compatible = "asahi-kasei,ak4104";
-	reg = <0>;
-	spi-max-frequency = <5000000>;
-	vdd-supply = <&vdd_3v3_reg>;
-};
diff --git a/dts/upstream/Bindings/sound/ak4554.txt b/dts/upstream/Bindings/sound/ak4554.txt
deleted file mode 100644
index 934fa02754b..00000000000
--- a/dts/upstream/Bindings/sound/ak4554.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-AK4554 ADC/DAC
-
-Required properties:
-
-  - compatible : "asahi-kasei,ak4554"
-
-Example:
-
-ak4554-adc-dac {
-	compatible = "asahi-kasei,ak4554";
-};
diff --git a/dts/upstream/Bindings/sound/amlogic,g12a-tohdmitx.txt b/dts/upstream/Bindings/sound/amlogic,g12a-tohdmitx.txt
deleted file mode 100644
index 4e8cd7eb7ce..00000000000
--- a/dts/upstream/Bindings/sound/amlogic,g12a-tohdmitx.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Amlogic HDMI Tx control glue
-
-Required properties:
-- compatible: "amlogic,g12a-tohdmitx" or
-	      "amlogic,sm1-tohdmitx"
-- reg: physical base address of the controller and length of memory
-       mapped region.
-- #sound-dai-cells: should be 1.
-- resets: phandle to the dedicated reset line of the hdmitx glue.
-
-Example on the S905X2 SoC:
-
-tohdmitx: audio-controller@744 {
-	compatible = "amlogic,g12a-tohdmitx";
-	reg = <0x0 0x744 0x0 0x4>;
-	#sound-dai-cells = <1>;
-	resets = <&clkc_audio AUD_RESET_TOHDMITX>;
-};
-
-Example of an 'amlogic,axg-sound-card':
-
-sound {
-	compatible = "amlogic,axg-sound-card";
-
-[...]
-
-	dai-link-x {
-		sound-dai = <&tdmif_a>;
-		dai-format = "i2s";
-		dai-tdm-slot-tx-mask-0 = <1 1>;
-
-		codec-0 {
-			sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
-		};
-
-		codec-1 {
-			sound-dai = <&external_dac>;
-		};
-	};
-
-	dai-link-y {
-		sound-dai = <&tdmif_c>;
-		dai-format = "i2s";
-		dai-tdm-slot-tx-mask-0 = <1 1>;
-
-		codec {
-			sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
-		};
-	};
-
-	dai-link-z {
-		sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
-
-		codec {
-			sound-dai = <&hdmi_tx>;
-		};
-	};
-};
diff --git a/dts/upstream/Bindings/sound/amlogic,g12a-tohdmitx.yaml b/dts/upstream/Bindings/sound/amlogic,g12a-tohdmitx.yaml
new file mode 100644
index 00000000000..b4b78475c5b
--- /dev/null
+++ b/dts/upstream/Bindings/sound/amlogic,g12a-tohdmitx.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,g12a-tohdmitx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12a HDMI TX Control Glue
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  compatible:
+    oneOf:
+      - items:
+          - const: amlogic,g12a-tohdmitx
+      - items:
+          - enum:
+              - amlogic,sm1-tohdmitx
+          - const: amlogic,g12a-tohdmitx
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - resets
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+    tohdmitx: audio-controller@744 {
+        compatible = "amlogic,g12a-tohdmitx";
+        reg = <0x744 0x4>;
+        resets = <&clkc_audio AUD_RESET_TOHDMITX>;
+        #sound-dai-cells = <1>;
+    };
diff --git a/dts/upstream/Bindings/sound/amlogic,gx-sound-card.yaml b/dts/upstream/Bindings/sound/amlogic,gx-sound-card.yaml
index d4277d342e6..0ecdaf7190e 100644
--- a/dts/upstream/Bindings/sound/amlogic,gx-sound-card.yaml
+++ b/dts/upstream/Bindings/sound/amlogic,gx-sound-card.yaml
@@ -23,7 +23,6 @@ properties:
 
   audio-widgets:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-    minItems: 2
     description: |-
       A list off component DAPM widget. Each entry is a pair of strings,
       the first being the widget type, the second being the widget name
diff --git a/dts/upstream/Bindings/sound/asahi-kasei,ak4104.yaml b/dts/upstream/Bindings/sound/asahi-kasei,ak4104.yaml
new file mode 100644
index 00000000000..86f6061d3c5
--- /dev/null
+++ b/dts/upstream/Bindings/sound/asahi-kasei,ak4104.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4104.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4104 S/PDIF transmitter
+
+allOf:
+  - $ref: dai-common.yaml#
+
+maintainers:
+  - Daniel Mack <github@zonque.org>
+  - Xiaxi Shen <shenxiaxi26@gmail.com>
+
+properties:
+  compatible:
+    const: asahi-kasei,ak4104
+
+  reg:
+    description: Chip select number on the SPI bus 
+    maxItems: 1
+
+  vdd-supply:
+    description: A regulator node providing between 2.7V and 3.6V.
+
+  reset-gpios:
+    maxItems: 1
+    description: Optional GPIO spec for the reset pin, deasserted 
+                  before communication starts.
+    
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@0 {
+            compatible = "asahi-kasei,ak4104";
+            reg = <0>;
+            vdd-supply = <&vdd_3v3_reg>;
+        };
+    };
diff --git a/dts/upstream/Bindings/sound/ak4375.yaml b/dts/upstream/Bindings/sound/asahi-kasei,ak4375.yaml
index 587598e122c..bc07fcba535 100644
--- a/dts/upstream/Bindings/sound/ak4375.yaml
+++ b/dts/upstream/Bindings/sound/asahi-kasei,ak4375.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/ak4375.yaml#
+$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4375.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AK4375 DAC and headphones amplifier
diff --git a/dts/upstream/Bindings/sound/asahi-kasei,ak4554.yaml b/dts/upstream/Bindings/sound/asahi-kasei,ak4554.yaml
new file mode 100644
index 00000000000..c77d85df239
--- /dev/null
+++ b/dts/upstream/Bindings/sound/asahi-kasei,ak4554.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4554.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4554 sound codec
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+  - Liam Girdwood <lgirdwood@gmail.com>
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  compatible:
+    const: asahi-kasei,ak4554
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    codec {
+        compatible = "asahi-kasei,ak4554";
+    };
diff --git a/dts/upstream/Bindings/sound/ak4613.yaml b/dts/upstream/Bindings/sound/asahi-kasei,ak4613.yaml
index 75e13414d6e..b49a6cff9f1 100644
--- a/dts/upstream/Bindings/sound/ak4613.yaml
+++ b/dts/upstream/Bindings/sound/asahi-kasei,ak4613.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/ak4613.yaml#
+$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4613.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AK4613 I2C transmitter
diff --git a/dts/upstream/Bindings/sound/asahi-kasei,ak4619.yaml b/dts/upstream/Bindings/sound/asahi-kasei,ak4619.yaml
new file mode 100644
index 00000000000..d412531ef9a
--- /dev/null
+++ b/dts/upstream/Bindings/sound/asahi-kasei,ak4619.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4619.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4619 I2C transmitter
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+  - Khanh Le <khanh.le.xr@renesas.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: asahi-kasei,ak4619
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  "#sound-dai-cells":
+    const: 0
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@10 {
+            compatible = "asahi-kasei,ak4619";
+            reg = <0x10>;
+
+            clocks = <&rcar_sound>;
+            clock-names = "mclk";
+
+            #sound-dai-cells = <0>;
+            port {
+                 ak4619_endpoint: endpoint {
+                       remote-endpoint = <&rsnd_endpoint>;
+                  };
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/sound/ak4642.yaml b/dts/upstream/Bindings/sound/asahi-kasei,ak4642.yaml
index 437fe5d7cae..fc03f0373a1 100644
--- a/dts/upstream/Bindings/sound/ak4642.yaml
+++ b/dts/upstream/Bindings/sound/asahi-kasei,ak4642.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/ak4642.yaml#
+$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4642.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AK4642 I2C transmitter
diff --git a/dts/upstream/Bindings/sound/audio-graph-card2.yaml b/dts/upstream/Bindings/sound/audio-graph-card2.yaml
index d3ce4de449d..f943f90d8b1 100644
--- a/dts/upstream/Bindings/sound/audio-graph-card2.yaml
+++ b/dts/upstream/Bindings/sound/audio-graph-card2.yaml
@@ -23,6 +23,11 @@ properties:
       Each entry is a pair of strings, the first being the
       connection's sink, the second being the connection's source.
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  aux-devs:
+    description: |
+      List of phandles pointing to auxiliary devices, such
+      as amplifiers, to be added to the sound card.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
   multi:
     type: object
     description: Multi-CPU/Codec node
diff --git a/dts/upstream/Bindings/sound/audio-graph-port.yaml b/dts/upstream/Bindings/sound/audio-graph-port.yaml
index 28b27e7e45d..d1cbfc5edd3 100644
--- a/dts/upstream/Bindings/sound/audio-graph-port.yaml
+++ b/dts/upstream/Bindings/sound/audio-graph-port.yaml
@@ -25,6 +25,15 @@ definitions:
       capture-only:
         description: port connection used only for capture
         $ref: /schemas/types.yaml#/definitions/flag
+      link-trigger-order:
+        description: trigger order for both start/stop
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+      link-trigger-order-start:
+        description: trigger order for start
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+      link-trigger-order-stop:
+        description: trigger order for stop
+        $ref: /schemas/types.yaml#/definitions/uint32-array
 
   endpoint-base:
     allOf:
diff --git a/dts/upstream/Bindings/sound/cirrus,cs4270.yaml b/dts/upstream/Bindings/sound/cirrus,cs4270.yaml
new file mode 100644
index 00000000000..336e1177369
--- /dev/null
+++ b/dts/upstream/Bindings/sound/cirrus,cs4270.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs4270.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS4270 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description:
+  The CS4270 is a stereo audio codec. The driver for this device currently only
+  supports I2C.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: cirrus,cs4270
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  reset-gpios:
+    description:
+      This pin will be deasserted before communication to the codec starts.
+    maxItems: 1
+
+  va-supply:
+    description: Analog power supply.
+
+  vd-supply:
+    description: Digital power supply.
+
+  vlc-supply:
+    description: Serial Control Port power supply.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      codec@48 {
+          compatible = "cirrus,cs4270";
+          reg = <0x48>;
+      };
+    };
diff --git a/dts/upstream/Bindings/sound/cirrus,cs42xx8.yaml b/dts/upstream/Bindings/sound/cirrus,cs42xx8.yaml
new file mode 100644
index 00000000000..725b47e8206
--- /dev/null
+++ b/dts/upstream/Bindings/sound/cirrus,cs42xx8.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42xx8.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS42448/CS42888 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs42448
+      - cirrus,cs42888
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    const: mclk
+
+  VA-supply:
+    description: Analog power supply.
+
+  VD-supply:
+    description: Digital power supply.
+
+  VLC-supply:
+    description: Control port power supply
+
+  VLS-supply:
+    description: Serial port interface power supply.
+
+  reset-gpios:
+    description: This pin is connected to the chip's RESET pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: cirrus,cs42888
+then:
+  required:
+    - VA-supply
+    - VD-supply
+    - VLC-supply
+    - VLS-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      codec@48 {
+          compatible = "cirrus,cs42888";
+          reg = <0x48>;
+          clocks = <&codec_mclk 0>;
+          clock-names = "mclk";
+          VA-supply = <&reg_audio>;
+          VD-supply = <&reg_audio>;
+          VLS-supply = <&reg_audio>;
+          VLC-supply = <&reg_audio>;
+          reset-gpios = <&gpio 1>;
+      };
+    };
diff --git a/dts/upstream/Bindings/sound/cirrus,cs530x.yaml b/dts/upstream/Bindings/sound/cirrus,cs530x.yaml
new file mode 100644
index 00000000000..9582eb8eb41
--- /dev/null
+++ b/dts/upstream/Bindings/sound/cirrus,cs530x.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs530x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic cs530x family of audio ADCs
+
+maintainers:
+  - Paul Handrigan <paulha@opensource.cirrus.com>
+  - patches@opensource.cirrus.com
+
+description:
+  The CS530X devices are a family of high performance audio ADCs.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs5302
+      - cirrus,cs5304
+      - cirrus,cs5308
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-a-supply:
+    description: Analog power supply
+
+  vdd-io-supply:
+    description: Digital IO power supply
+
+  cirrus,in-hiz-pin12:
+    description:
+      Sets input channels one and two to high impedance.
+    type: boolean
+
+  cirrus,in-hiz-pin34:
+    description:
+      Sets input channels three and four to high impedance.
+    type: boolean
+
+  cirrus,in-hiz-pin56:
+    description:
+      Sets input channels five and six to high impedance.
+    type: boolean
+
+  cirrus,in-hiz-pin78:
+    description:
+      Sets input channels seven and eight to high impedance.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs5304: adc@48 {
+            compatible = "cirrus,cs5304";
+            reg = <0x48>;
+            #sound-dai-cells = <1>;
+            reset-gpios = <&gpio 110 GPIO_ACTIVE_LOW>;
+            vdd-a-supply = <&vreg>;
+            vdd-io-supply = <&vreg>;
+            cirrus,in-hiz-pin34;
+        };
+    };
diff --git a/dts/upstream/Bindings/sound/cs4270.txt b/dts/upstream/Bindings/sound/cs4270.txt
deleted file mode 100644
index c33770ec4c3..00000000000
--- a/dts/upstream/Bindings/sound/cs4270.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-CS4270 audio CODEC
-
-The driver for this device currently only supports I2C.
-
-Required properties:
-
-  - compatible : "cirrus,cs4270"
-
-  - reg : the I2C address of the device for I2C
-
-Optional properties:
-
-  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
-		  deasserted before communication to the codec starts.
-
-Example:
-
-codec: cs4270@48 {
-	compatible = "cirrus,cs4270";
-	reg = <0x48>;
-};
diff --git a/dts/upstream/Bindings/sound/cs42xx8.txt b/dts/upstream/Bindings/sound/cs42xx8.txt
deleted file mode 100644
index bbfe39347c2..00000000000
--- a/dts/upstream/Bindings/sound/cs42xx8.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-CS42448/CS42888 audio CODEC
-
-Required properties:
-
-  - compatible : must contain one of "cirrus,cs42448" and "cirrus,cs42888"
-
-  - reg : the I2C address of the device for I2C
-
-  - clocks : a list of phandles + clock-specifiers, one for each entry in
-    clock-names
-
-  - clock-names : must contain "mclk"
-
-  - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device,
-    as covered in Documentation/devicetree/bindings/regulator/regulator.txt
-
-Optional properties:
-
-  - reset-gpios : a GPIO spec to define which pin is connected to the chip's
-    !RESET pin
-
-Example:
-
-cs42888: codec@48 {
-	compatible = "cirrus,cs42888";
-	reg = <0x48>;
-	clocks = <&codec_mclk 0>;
-	clock-names = "mclk";
-	VA-supply = <&reg_audio>;
-	VD-supply = <&reg_audio>;
-	VLS-supply = <&reg_audio>;
-	VLC-supply = <&reg_audio>;
-	reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>;
-};
diff --git a/dts/upstream/Bindings/sound/everest,es7134.txt b/dts/upstream/Bindings/sound/everest,es7134.txt
deleted file mode 100644
index 091666069bd..00000000000
--- a/dts/upstream/Bindings/sound/everest,es7134.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-ES7134 i2s DA converter
-
-Required properties:
-- compatible : "everest,es7134" or
-               "everest,es7144" or
-	       "everest,es7154"
-- VDD-supply : regulator phandle for the VDD supply
-- PVDD-supply: regulator phandle for the PVDD supply for the es7154
-
-Example:
-
-i2s_codec: external-codec {
-	compatible = "everest,es7134";
-	VDD-supply = <&vcc_5v>;
-};
diff --git a/dts/upstream/Bindings/sound/everest,es71x4.yaml b/dts/upstream/Bindings/sound/everest,es71x4.yaml
new file mode 100644
index 00000000000..fd1b3281222
--- /dev/null
+++ b/dts/upstream/Bindings/sound/everest,es71x4.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es71x4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES7134/7144/7154 2 channels I2S analog to digital converter
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - everest,es7134
+      - everest,es7144
+      - everest,es7154
+
+  VDD-supply: true
+  PVDD-supply: true
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - VDD-supply
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - everest,es7134
+              - everest,es7144
+    then:
+      properties:
+        PVDD-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - everest,es7154
+    then:
+      required:
+        - PVDD-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   codec {
+       compatible = "everest,es7134";
+       #sound-dai-cells = <0>;
+       VDD-supply = <&vdd_supply>;
+   };
+
+...
diff --git a/dts/upstream/Bindings/sound/everest,es7241.txt b/dts/upstream/Bindings/sound/everest,es7241.txt
deleted file mode 100644
index 28f82cf4959..00000000000
--- a/dts/upstream/Bindings/sound/everest,es7241.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-ES7241 i2s AD converter
-
-Required properties:
-- compatible : "everest,es7241"
-- VDDP-supply: regulator phandle for the VDDA supply
-- VDDA-supply: regulator phandle for the VDDP supply
-- VDDD-supply: regulator phandle for the VDDD supply
-
-Optional properties:
-- reset-gpios: gpio connected to the reset pin
-- m0-gpios   : gpio connected to the m0 pin
-- m1-gpios   : gpio connected to the m1 pin
-- everest,sdout-pull-down:
-   Format used by the serial interface is controlled by pulling
-   the sdout. If the sdout is pulled down, leftj format is used.
-   If this property is not provided, sdout is assumed to pulled
-   up and i2s format is used
-
-Example:
-
-linein: audio-codec@2 {
-	#sound-dai-cells = <0>;
-	compatible = "everest,es7241";
-	VDDA-supply = <&vcc_3v3>;
-	VDDP-supply = <&vcc_3v3>;
-	VDDD-supply = <&vcc_3v3>;
-	reset-gpios = <&gpio GPIOH_42>;
-};
diff --git a/dts/upstream/Bindings/sound/everest,es7241.yaml b/dts/upstream/Bindings/sound/everest,es7241.yaml
new file mode 100644
index 00000000000..f179af75873
--- /dev/null
+++ b/dts/upstream/Bindings/sound/everest,es7241.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es7241.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES7241 2 channels I2S analog to digital converter
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - everest,es7241
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to the reset pin
+
+  m0-gpios:
+    maxItems: 1
+    description: GPIO connected to the m0 pin
+
+  m1-gpios:
+    maxItems: 1
+    description: GPIO connected to the m0 pin
+
+  everest,sdout-pull-down:
+    type: boolean
+    description:
+      Format used by the serial interface is controlled by pulling
+      the sdout. If the sdout is pulled down, leftj format is used.
+      If this property is not provided, sdout is assumed to pulled
+      up and i2s format is used
+
+  VDDP-supply: true
+  VDDA-supply: true
+  VDDD-supply: true
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - VDDP-supply
+  - VDDA-supply
+  - VDDD-supply
+
+allOf:
+  - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   codec {
+       compatible = "everest,es7241";
+       #sound-dai-cells = <0>;
+       reset-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+       VDDP-supply = <&vddp_supply>;
+       VDDA-supply = <&vdda_supply>;
+       VDDD-supply = <&vddd_supply>;
+   };
+
+...
diff --git a/dts/upstream/Bindings/sound/everest,es8316.yaml b/dts/upstream/Bindings/sound/everest,es8316.yaml
index b6079b3c440..214f135b777 100644
--- a/dts/upstream/Bindings/sound/everest,es8316.yaml
+++ b/dts/upstream/Bindings/sound/everest,es8316.yaml
@@ -4,18 +4,21 @@
 $id: http://devicetree.org/schemas/sound/everest,es8316.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Everest ES8316 audio CODEC
+title: Everest ES8311 and ES8316 audio CODECs
 
 maintainers:
   - Daniel Drake <drake@endlessm.com>
   - Katsuhiro Suzuki <katsuhiro@katsuster.net>
+  - Matteo Martelli <matteomartelli3@gmail.com>
 
 allOf:
   - $ref: dai-common.yaml#
 
 properties:
   compatible:
-    const: everest,es8316
+    enum:
+      - everest,es8311
+      - everest,es8316
 
   reg:
     maxItems: 1
diff --git a/dts/upstream/Bindings/sound/fsl,imx-audio-spdif.yaml b/dts/upstream/Bindings/sound/fsl,imx-audio-spdif.yaml
deleted file mode 100644
index 5fc543d02ec..00000000000
--- a/dts/upstream/Bindings/sound/fsl,imx-audio-spdif.yaml
+++ /dev/null
@@ -1,66 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/sound/fsl,imx-audio-spdif.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Freescale i.MX audio complex with S/PDIF transceiver
-
-maintainers:
-  - Shengjiu Wang <shengjiu.wang@nxp.com>
-
-properties:
-  compatible:
-    oneOf:
-      - items:
-          - enum:
-              - fsl,imx-sabreauto-spdif
-              - fsl,imx6sx-sdb-spdif
-          - const: fsl,imx-audio-spdif
-      - enum:
-          - fsl,imx-audio-spdif
-
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: User specified audio sound card name
-
-  spdif-controller:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description: The phandle of the i.MX S/PDIF controller
-
-  spdif-out:
-    type: boolean
-    description:
-      If present, the transmitting function of S/PDIF will be enabled,
-      indicating there's a physical S/PDIF out connector or jack on the
-      board or it's connecting to some other IP block, such as an HDMI
-      encoder or display-controller.
-
-  spdif-in:
-    type: boolean
-    description:
-      If present, the receiving function of S/PDIF will be enabled,
-      indicating there is a physical S/PDIF in connector/jack on the board.
-
-required:
-  - compatible
-  - model
-  - spdif-controller
-
-anyOf:
-  - required:
-      - spdif-in
-  - required:
-      - spdif-out
-
-additionalProperties: false
-
-examples:
-  - |
-    sound-spdif {
-        compatible = "fsl,imx-audio-spdif";
-        model = "imx-spdif";
-        spdif-controller = <&spdif>;
-        spdif-out;
-        spdif-in;
-    };
diff --git a/dts/upstream/Bindings/sound/fsl,mqs.yaml b/dts/upstream/Bindings/sound/fsl,mqs.yaml
index 8b33353a80c..030ccc17313 100644
--- a/dts/upstream/Bindings/sound/fsl,mqs.yaml
+++ b/dts/upstream/Bindings/sound/fsl,mqs.yaml
@@ -23,6 +23,8 @@ properties:
       - fsl,imx8qm-mqs
       - fsl,imx8qxp-mqs
       - fsl,imx93-mqs
+      - fsl,imx95-aonmix-mqs
+      - fsl,imx95-netcmix-mqs
 
   clocks:
     minItems: 1
diff --git a/dts/upstream/Bindings/sound/fsl,qmc-audio.yaml b/dts/upstream/Bindings/sound/fsl,qmc-audio.yaml
index b522ed7dcc5..a23e49198c3 100644
--- a/dts/upstream/Bindings/sound/fsl,qmc-audio.yaml
+++ b/dts/upstream/Bindings/sound/fsl,qmc-audio.yaml
@@ -12,7 +12,9 @@ maintainers:
 description: |
   The QMC audio is an ASoC component which uses QMC (QUICC Multichannel
   Controller) channels to transfer the audio data.
-  It provides as many DAI as the number of QMC channel used.
+  It provides several DAIs. For each DAI, the DAI is working in interleaved mode
+  if only one QMC channel is used by the DAI or it is working in non-interleaved
+  mode if several QMC channels are used by the DAI.
 
 allOf:
   - $ref: dai-common.yaml#
@@ -45,12 +47,19 @@ patternProperties:
       fsl,qmc-chan:
         $ref: /schemas/types.yaml#/definitions/phandle-array
         items:
-          - items:
-              - description: phandle to QMC node
-              - description: Channel number
+          items:
+            - description: phandle to QMC node
+            - description: Channel number
+        minItems: 1
         description:
-          Should be a phandle/number pair. The phandle to QMC node and the QMC
-          channel to use for this DAI.
+          Should be a phandle/number pair list. The list of phandle to QMC node
+          and the QMC channel pair to use for this DAI.
+          If only one phandle/number pair is provided, this DAI works in
+          interleaved mode, i.e. audio channels for this DAI are interleaved in
+          the QMC channel. If more than one pair is provided, this DAI works
+          in non-interleave mode. In that case the first audio channel uses the
+          the first QMC channel, the second audio channel uses the second QMC
+          channel, etc...
 
     required:
       - reg
@@ -79,6 +88,11 @@ examples:
             reg = <17>;
             fsl,qmc-chan = <&qmc 17>;
         };
+        dai@18 {
+            reg = <18>;
+            /* Non-interleaved mode */
+            fsl,qmc-chan = <&qmc 18>, <&qmc 19>;
+        };
     };
 
     sound {
@@ -115,4 +129,19 @@ examples:
                 dai-tdm-slot-rx-mask = <0 0 1 0 1 0 1 0 1>;
             };
         };
+        simple-audio-card,dai-link@2 {
+            reg = <2>;
+            format = "dsp_b";
+            cpu {
+                sound-dai = <&audio_controller 18>;
+            };
+            codec {
+                sound-dai = <&codec3>;
+                dai-tdm-slot-num = <2>;
+                dai-tdm-slot-width = <8>;
+                /* TS 9, 10 */
+                dai-tdm-slot-tx-mask = <0 0 0 0 0 0 0 0 0 1 1>;
+                dai-tdm-slot-rx-mask = <0 0 0 0 0 0 0 0 0 1 1>;
+            };
+        };
     };
diff --git a/dts/upstream/Bindings/sound/fsl,rpmsg.yaml b/dts/upstream/Bindings/sound/fsl,rpmsg.yaml
index 188f38badde..3d5d435c765 100644
--- a/dts/upstream/Bindings/sound/fsl,rpmsg.yaml
+++ b/dts/upstream/Bindings/sound/fsl,rpmsg.yaml
@@ -29,6 +29,7 @@ properties:
       - fsl,imx8mp-rpmsg-audio
       - fsl,imx8ulp-rpmsg-audio
       - fsl,imx93-rpmsg-audio
+      - fsl,imx95-rpmsg-audio
 
   clocks:
     items:
diff --git a/dts/upstream/Bindings/sound/sgtl5000.yaml b/dts/upstream/Bindings/sound/fsl,sgtl5000.yaml
index 1353c051488..c6ab1ca1676 100644
--- a/dts/upstream/Bindings/sound/sgtl5000.yaml
+++ b/dts/upstream/Bindings/sound/fsl,sgtl5000.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/sgtl5000.yaml#
+$id: http://devicetree.org/schemas/sound/fsl,sgtl5000.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Freescale SGTL5000 Stereo Codec
diff --git a/dts/upstream/Bindings/sound/fsl,xcvr.yaml b/dts/upstream/Bindings/sound/fsl,xcvr.yaml
index 0eb0c1ba871..5e280101422 100644
--- a/dts/upstream/Bindings/sound/fsl,xcvr.yaml
+++ b/dts/upstream/Bindings/sound/fsl,xcvr.yaml
@@ -22,6 +22,7 @@ properties:
     enum:
       - fsl,imx8mp-xcvr
       - fsl,imx93-xcvr
+      - fsl,imx95-xcvr
 
   reg:
     items:
@@ -41,6 +42,7 @@ properties:
     items:
       - description: WAKEUPMIX Audio XCVR Interrupt 1
       - description: WAKEUPMIX Audio XCVR Interrupt 2
+      - description: SPDIF wakeup interrupt from PHY
     minItems: 1
 
   clocks:
@@ -49,6 +51,9 @@ properties:
       - description: PHY clock
       - description: SPBA clock
       - description: PLL clock
+      - description: PLL clock source for 8kHz series
+      - description: PLL clock source for 11kHz series
+    minItems: 4
 
   clock-names:
     items:
@@ -56,6 +61,9 @@ properties:
       - const: phy
       - const: spba
       - const: pll_ipg
+      - const: pll8k
+      - const: pll11k
+    minItems: 4
 
   dmas:
     items:
@@ -79,15 +87,25 @@ required:
   - clock-names
   - dmas
   - dma-names
-  - resets
 
 allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-xcvr
+    then:
+      required:
+        - resets
+
   - if:
       properties:
         compatible:
           contains:
             enum:
               - fsl,imx93-xcvr
+              - fsl,imx95-xcvr
     then:
       properties:
         interrupts:
@@ -96,9 +114,24 @@ allOf:
     else:
       properties:
         interrupts:
-          maxItems: 1
+          minItems: 3
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mp-xcvr
+              - fsl,imx93-xcvr
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -113,7 +146,9 @@ examples:
                  <0x30cc0c00 0x080>,
                  <0x30cc0e00 0x080>;
            reg-names = "ram", "regs", "rxfifo", "txfifo";
-           interrupts = <0x0 128 IRQ_TYPE_LEVEL_HIGH>;
+           interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+                        <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+                        <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
            clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>,
                     <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>,
                     <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>,
diff --git a/dts/upstream/Bindings/sound/fsl-asoc-card.yaml b/dts/upstream/Bindings/sound/fsl-asoc-card.yaml
index 9922664d5cc..92aa47ec72c 100644
--- a/dts/upstream/Bindings/sound/fsl-asoc-card.yaml
+++ b/dts/upstream/Bindings/sound/fsl-asoc-card.yaml
@@ -67,6 +67,11 @@ properties:
               - fsl,imx-audio-wm8962
       - items:
           - enum:
+              - fsl,imx-sabreauto-spdif
+              - fsl,imx6sx-sdb-spdif
+          - const: fsl,imx-audio-spdif
+      - items:
+          - enum:
               - fsl,imx-audio-ac97
               - fsl,imx-audio-cs42888
               - fsl,imx-audio-cs427x
@@ -81,6 +86,7 @@ properties:
               - fsl,imx-audio-wm8960
               - fsl,imx-audio-wm8962
               - fsl,imx-audio-wm8958
+              - fsl,imx-audio-spdif
 
   model:
     $ref: /schemas/types.yaml#/definitions/string
@@ -93,8 +99,15 @@ properties:
       need to add ASRC support via DPCM.
 
   audio-codec:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description: The phandle of an audio codec
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      The phandle of an audio codec.
+      With "fsl,imx-audio-spdif", either SPDIF audio codec spdif_transmitter,
+      spdif_receiver or both.
+    minItems: 1
+    maxItems: 2
+    items:
+      maxItems: 1
 
   audio-cpu:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -150,8 +163,10 @@ properties:
     description: dai-link uses bit clock inversion.
 
   mclk-id:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: main clock id, specific for each card configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Main clock id for each codec, specific for each card configuration.
+    minItems: 1
+    maxItems: 2
 
   mux-int-port:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -167,6 +182,27 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of an CPU DAI controller
 
+  spdif-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+    description: The phandle of an S/PDIF CPU DAI controller.
+
+  spdif-out:
+    type: boolean
+    deprecated: true
+    description: |
+      If present, the transmitting function of S/PDIF will be enabled,
+      indicating there's a physical S/PDIF out connector or jack on the
+      board or it's connecting to some other IP block, such as an HDMI
+      encoder or display-controller.
+
+  spdif-in:
+    type: boolean
+    deprecated: true
+    description: |
+      If present, the receiving function of S/PDIF will be enabled,
+      indicating there is a physical S/PDIF in connector/jack on the board.
+
 required:
   - compatible
   - model
@@ -195,3 +231,12 @@ examples:
              "AIN2L", "Line In Jack",
              "AIN2R", "Line In Jack";
     };
+
+  - |
+    sound-spdif-asrc {
+        compatible = "fsl,imx-audio-spdif";
+        model = "spdif-asrc-audio";
+        audio-cpu = <&spdif>;
+        audio-asrc = <&easrc>;
+        audio-codec = <&spdifdit>, <&spdifdir>;
+    };
diff --git a/dts/upstream/Bindings/sound/linux,spdif-dit.yaml b/dts/upstream/Bindings/sound/linux,spdif.yaml
index fe5f0756af2..0f4893e11ec 100644
--- a/dts/upstream/Bindings/sound/linux,spdif-dit.yaml
+++ b/dts/upstream/Bindings/sound/linux,spdif.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/linux,spdif-dit.yaml#
+$id: http://devicetree.org/schemas/sound/linux,spdif.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dummy SPDIF Transmitter
+title: Dummy SPDIF Transmitter/Receiver
 
 maintainers:
   - Mark Brown <broonie@kernel.org>
@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: linux,spdif-dit
+    enum:
+      - linux,spdif-dit
+      - linux,spdif-dir
 
   "#sound-dai-cells":
     const: 0
diff --git a/dts/upstream/Bindings/sound/maxim,max98088.txt b/dts/upstream/Bindings/sound/maxim,max98088.txt
deleted file mode 100644
index da764d91331..00000000000
--- a/dts/upstream/Bindings/sound/maxim,max98088.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-MAX98088 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible: "maxim,max98088" or "maxim,max98089".
-- reg: The I2C address of the device.
-
-Optional properties:
-
-- clocks: the clock provider of MCLK, see ../clock/clock-bindings.txt section
-  "consumer" for more information.
-- clock-names: must be set to "mclk"
-
-Example:
-
-max98089: codec@10 {
-	compatible = "maxim,max98089";
-	reg = <0x10>;
-	clocks = <&clks IMX6QDL_CLK_CKO2>;
-	clock-names = "mclk";
-};
diff --git a/dts/upstream/Bindings/sound/maxim,max98088.yaml b/dts/upstream/Bindings/sound/maxim,max98088.yaml
new file mode 100644
index 00000000000..e4a2967e1e8
--- /dev/null
+++ b/dts/upstream/Bindings/sound/maxim,max98088.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98088.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX98088 audio CODEC
+
+maintainers:
+  - Abdulrasaq Lawani <abdulrasaqolawani@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max98088
+      - maxim,max98089
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: master clock
+
+  clock-names:
+    items:
+      - const: mclk
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        audio-codec@10 {
+            compatible = "maxim,max98089";
+            reg = <0x10>;
+            clocks = <&clks 0>;
+            clock-names = "mclk";
+        };
+    };
diff --git a/dts/upstream/Bindings/sound/zl38060.yaml b/dts/upstream/Bindings/sound/mscc,zl38060.yaml
index 8bd201e573a..994313fd12b 100644
--- a/dts/upstream/Bindings/sound/zl38060.yaml
+++ b/dts/upstream/Bindings/sound/mscc,zl38060.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/zl38060.yaml#
+$id: http://devicetree.org/schemas/sound/mscc,zl38060.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ZL38060 Connected Home Audio Processor from Microsemi.
diff --git a/dts/upstream/Bindings/sound/nuvoton,nau8824.yaml b/dts/upstream/Bindings/sound/nuvoton,nau8824.yaml
index 3dbf438c384..232dc16a94a 100644
--- a/dts/upstream/Bindings/sound/nuvoton,nau8824.yaml
+++ b/dts/upstream/Bindings/sound/nuvoton,nau8824.yaml
@@ -23,6 +23,14 @@ properties:
   '#sound-dai-cells':
     const: 0
 
+  clocks:
+    items:
+      - description: The phandle of the master clock to the CODEC
+
+  clock-names:
+    items:
+      - const: mclk
+
   interrupts:
     maxItems: 1
 
diff --git a/dts/upstream/Bindings/sound/nxp,lpc3220-i2s.yaml b/dts/upstream/Bindings/sound/nxp,lpc3220-i2s.yaml
new file mode 100644
index 00000000000..40a0877a8ab
--- /dev/null
+++ b/dts/upstream/Bindings/sound/nxp,lpc3220-i2s.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nxp,lpc3220-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32XX I2S Controller
+
+description:
+  The I2S controller in LPC32XX SoCs, ASoC DAI.
+
+maintainers:
+  - J.M.B. Downing <jonathan.downing@nautel.com>
+  - Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nxp,lpc3220-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input clock of the peripheral.
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - dmas
+  - dma-names
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc32xx-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2s@20094000 {
+      compatible = "nxp,lpc3220-i2s";
+      reg = <0x20094000 0x1000>;
+      interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clk LPC32XX_CLK_I2S0>;
+      dmas = <&dma 0 1>, <&dma 13 1>;
+      dma-names = "rx", "tx";
+      #sound-dai-cells = <0>;
+    };
+
+...
diff --git a/dts/upstream/Bindings/sound/omap-mcpdm.txt b/dts/upstream/Bindings/sound/omap-mcpdm.txt
deleted file mode 100644
index ff98a0cb5b3..00000000000
--- a/dts/upstream/Bindings/sound/omap-mcpdm.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Texas Instruments OMAP4+ McPDM
-
-Required properties:
-- compatible: "ti,omap4-mcpdm"
-- reg: Register location and size as an array:
-       <MPU access base address, size>,
-       <L3 interconnect address, size>;
-- interrupts: Interrupt number for McPDM
-- ti,hwmods: Name of the hwmod associated to the McPDM
-- clocks:  phandle for the pdmclk provider, likely <&twl6040>
-- clock-names: Must be "pdmclk"
-
-Example:
-
-mcpdm: mcpdm@40132000 {
-	compatible = "ti,omap4-mcpdm";
-	reg = <0x40132000 0x7f>, /* MPU private access */
-	      <0x49032000 0x7f>; /* L3 Interconnect */
-	interrupts = <0 112 0x4>;
-	interrupt-parent = <&gic>;
-	ti,hwmods = "mcpdm";
-};
-
-In board DTS file the pdmclk needs to be added:
-
-&mcpdm {
-	clocks = <&twl6040>;
-	clock-names = "pdmclk";
-	status = "okay";
-};
diff --git a/dts/upstream/Bindings/sound/pcm512x.txt b/dts/upstream/Bindings/sound/pcm512x.txt
index 77006a4aec4..47878a6df60 100644
--- a/dts/upstream/Bindings/sound/pcm512x.txt
+++ b/dts/upstream/Bindings/sound/pcm512x.txt
@@ -6,7 +6,7 @@ on the board). The TAS575x devices only support I2C.
 Required properties:
 
   - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141",
-                 "ti,pcm5142", "ti,tas5754" or "ti,tas5756"
+                 "ti,pcm5142", "ti,pcm5242", "ti,tas5754" or "ti,tas5756"
 
   - reg : the I2C address of the device for I2C, the chip select
           number for SPI.
diff --git a/dts/upstream/Bindings/sound/qcom,apq8096.txt b/dts/upstream/Bindings/sound/qcom,apq8096.txt
deleted file mode 100644
index e1b9fa8a5bf..00000000000
--- a/dts/upstream/Bindings/sound/qcom,apq8096.txt
+++ /dev/null
@@ -1,128 +0,0 @@
-* Qualcomm Technologies APQ8096 ASoC sound card driver
-
-This binding describes the APQ8096 sound card, which uses qdsp for audio.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,apq8096-sndcard"
-
-- audio-routing:
-	Usage: Optional
-	Value type: <stringlist>
-	Definition:  A list of the connections between audio components.
-		  Each entry is a pair of strings, the first being the
-		  connection's sink, the second being the connection's
-		  source. Valid names could be power supplies, MicBias
-		  of codec and the jacks on the board:
-		  Valid names include:
-
-		Board Connectors:
-			"Headphone Left"
-			"Headphone Right"
-			"Earphone"
-			"Line Out1"
-			"Line Out2"
-			"Line Out3"
-			"Line Out4"
-			"Analog Mic1"
-			"Analog Mic2"
-			"Analog Mic3"
-			"Analog Mic4"
-			"Analog Mic5"
-			"Analog Mic6"
-			"Digital Mic2"
-			"Digital Mic3"
-
-		Audio pins and MicBias on WCD9335 Codec:
-			"MIC_BIAS1"
-			"MIC_BIAS2"
-			"MIC_BIAS3"
-			"MIC_BIAS4"
-			"AMIC1"
-			"AMIC2"
-			"AMIC3"
-			"AMIC4"
-			"AMIC5"
-			"AMIC6"
-			"AMIC6"
-			"DMIC1"
-			"DMIC2"
-			"DMIC3"
-
-- model:
-	Usage: required
-	Value type: <stringlist>
-	Definition: The user-visible name of this sound card.
-
-- aux-devs
-	Usage: optional
-	Value type: <array of phandles>
-	Definition: A list of phandles for auxiliary devices (e.g. analog
-		    amplifiers) that do not appear directly within the DAI
-		    links. Should be connected to another audio component
-		    using "audio-routing".
-
-= dailinks
-Each subnode of sndcard represents either a dailink, and subnodes of each
-dailinks would be cpu/codec/platform dais.
-
-- link-name:
-	Usage: required
-	Value type: <string>
-	Definition: User friendly name for dai link
-
-= CPU, PLATFORM, CODEC dais subnodes
-- cpu:
-	Usage: required
-	Value type: <subnode>
-	Definition: cpu dai sub-node
-
-- codec:
-	Usage: Optional
-	Value type: <subnode>
-	Definition: codec dai sub-node
-
-- platform:
-	Usage: Optional
-	Value type: <subnode>
-	Definition: platform dai sub-node
-
-- sound-dai:
-	Usage: required
-	Value type: <phandle with arguments>
-	Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node.
-
-Obsolete:
-	qcom,model: String for soundcard name (Use model instead)
-	qcom,audio-routing: A list of the connections between audio components.
-			    (Use audio-routing instead)
-
-Example:
-
-audio {
-	compatible = "qcom,apq8096-sndcard";
-	model = "DB820c";
-
-	mm1-dai-link {
-		link-name = "MultiMedia1";
-		cpu {
-			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
-		};
-	};
-
-	hdmi-dai-link {
-		link-name = "HDMI Playback";
-		cpu {
-			sound-dai = <&q6afe HDMI_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6adm>;
-		};
-
-		codec {
-			sound-dai = <&hdmi 0>;
-		};
-	};
-};
diff --git a/dts/upstream/Bindings/sound/qcom,msm8916-wcd-digital-codec.yaml b/dts/upstream/Bindings/sound/qcom,msm8916-wcd-digital-codec.yaml
new file mode 100644
index 00000000000..a899c4e7c1c
--- /dev/null
+++ b/dts/upstream/Bindings/sound/qcom,msm8916-wcd-digital-codec.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,msm8916-wcd-digital-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8916 WCD Digital Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  The digital WCD audio codec found on Qualcomm MSM8916 LPASS.
+
+properties:
+  compatible:
+    const: qcom,msm8916-wcd-digital-codec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ahbix-clk
+      - const: mclk
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#sound-dai-cells'
+
+allOf:
+  - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    audio-codec@771c000 {
+        compatible = "qcom,msm8916-wcd-digital-codec";
+        reg = <0x0771c000 0x400>;
+        clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+                 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+        clock-names = "ahbix-clk", "mclk";
+        #sound-dai-cells = <1>;
+    };
diff --git a/dts/upstream/Bindings/sound/qcom,msm8916-wcd-digital.txt b/dts/upstream/Bindings/sound/qcom,msm8916-wcd-digital.txt
deleted file mode 100644
index 1c8e4cb2517..00000000000
--- a/dts/upstream/Bindings/sound/qcom,msm8916-wcd-digital.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-msm8916 digital audio CODEC
-
-## Bindings for codec core in lpass:
-
-Required properties
- - compatible = "qcom,msm8916-wcd-digital-codec";
- - reg: address space for lpass codec.
- - clocks: Handle to mclk and ahbclk
- - clock-names: should be "mclk", "ahbix-clk".
-
-Example:
-
-audio-codec@771c000{
-	compatible = "qcom,msm8916-wcd-digital-codec";
-	reg = <0x0771c000 0x400>;
-	clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
-		 <&gcc GCC_CODEC_DIGCODEC_CLK>;
-	clock-names = "ahbix-clk", "mclk";
-	#sound-dai-cells = <1>;
-};
diff --git a/dts/upstream/Bindings/sound/qcom,sm8250.yaml b/dts/upstream/Bindings/sound/qcom,sm8250.yaml
index b2e15ebbd1b..c9076dcd44c 100644
--- a/dts/upstream/Bindings/sound/qcom,sm8250.yaml
+++ b/dts/upstream/Bindings/sound/qcom,sm8250.yaml
@@ -28,6 +28,7 @@ properties:
           - const: qcom,sm8450-sndcard
       - enum:
           - qcom,apq8016-sbc-sndcard
+          - qcom,apq8096-sndcard
           - qcom,msm8916-qdsp6-sndcard
           - qcom,qcm6490-idp-sndcard
           - qcom,qcs6490-rb3gen2-sndcard
diff --git a/dts/upstream/Bindings/sound/qcom,wcd934x.yaml b/dts/upstream/Bindings/sound/qcom,wcd934x.yaml
index beb0ff0245b..a65b1d1d5fd 100644
--- a/dts/upstream/Bindings/sound/qcom,wcd934x.yaml
+++ b/dts/upstream/Bindings/sound/qcom,wcd934x.yaml
@@ -199,10 +199,11 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     codec@1,0{
         compatible = "slim217,250";
         reg = <1 0>;
-        reset-gpios = <&tlmm 64 0>;
+        reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
         slim-ifc-dev = <&wcd9340_ifd>;
         #sound-dai-cells = <1>;
         interrupt-parent = <&tlmm>;
diff --git a/dts/upstream/Bindings/sound/qcom,wcd937x-sdw.yaml b/dts/upstream/Bindings/sound/qcom,wcd937x-sdw.yaml
new file mode 100644
index 00000000000..d3cf8f59cb2
--- /dev/null
+++ b/dts/upstream/Bindings/sound/qcom,wcd937x-sdw.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd937x-sdw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire Slave devices on WCD9370/WCD9375
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire slave devices. This bindings is for the
+  slave devices.
+
+properties:
+  compatible:
+    const: sdw20217010a00
+
+  reg:
+    maxItems: 1
+
+  qcom,tx-port-mapping:
+    description: |
+      Specifies static port mapping between device and host tx ports.
+      In the order of the device port index which are adc1_port, adc23_port,
+      dmic03_mbhc_port, dmic46_port.
+      Supports maximum 4 tx soundwire ports.
+
+      WCD9370 TX Port 1 (ADC1)               <=> SWR2 Port 2
+      WCD9370 TX Port 2 (ADC2, 3)            <=> SWR2 Port 2
+      WCD9370 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3
+      WCD9370 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4
+
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+    items:
+      enum: [1, 2, 3, 4]
+
+  qcom,rx-port-mapping:
+    description: |
+      Specifies static port mapping between device and host rx ports.
+      In the order of device port index which are hph_port, clsh_port,
+      comp_port, lo_port, dsd port.
+      Supports maximum 5 rx soundwire ports.
+
+      WCD9370 RX Port 1 (HPH_L/R)       <==>    SWR1 Port 1 (HPH_L/R)
+      WCD9370 RX Port 2 (CLSH)          <==>    SWR1 Port 2 (CLSH)
+      WCD9370 RX Port 3 (COMP_L/R)      <==>    SWR1 Port 3 (COMP_L/R)
+      WCD9370 RX Port 4 (LO)            <==>    SWR1 Port 4 (LO)
+      WCD9370 RX Port 5 (DSD_L/R)       <==>    SWR1 Port 5 (DSD)
+
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 5
+    maxItems: 5
+    items:
+      enum: [1, 2, 3, 4, 5]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@3210000 {
+        reg = <0x03210000 0x2000>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        wcd937x_rx: codec@0,4 {
+            compatible = "sdw20217010a00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5>;
+        };
+    };
+
+    soundwire@3230000 {
+        reg = <0x03230000 0x2000>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        wcd937x_tx: codec@0,3 {
+            compatible = "sdw20217010a00";
+            reg = <0 3>;
+            qcom,tx-port-mapping = <2 2 3 4>;
+        };
+    };
+
+...
diff --git a/dts/upstream/Bindings/sound/qcom,wcd937x.yaml b/dts/upstream/Bindings/sound/qcom,wcd937x.yaml
new file mode 100644
index 00000000000..f94203798f2
--- /dev/null
+++ b/dts/upstream/Bindings/sound/qcom,wcd937x.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9370/WCD9375 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire slave devices.
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: qcom,wcd93xx-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,wcd9370-codec
+      - items:
+          - const: qcom,wcd9375-codec
+          - const: qcom,wcd9370-codec
+
+  vdd-px-supply:
+    description: A reference to the 1.8V I/O supply
+
+required:
+  - compatible
+  - vdd-px-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    codec {
+        compatible = "qcom,wcd9370-codec";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&wcd_reset_n>;
+        pinctrl-1 = <&wcd_reset_n_sleep>;
+        reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
+        vdd-buck-supply = <&vreg_l17b_1p8>;
+        vdd-rxtx-supply = <&vreg_l18b_1p8>;
+        vdd-px-supply = <&vreg_l18b_1p8>;
+        vdd-mic-bias-supply = <&vreg_bob>;
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        qcom,rx-device = <&wcd937x_rx>;
+        qcom,tx-device = <&wcd937x_tx>;
+        #sound-dai-cells = <1>;
+    };
+
+    /* ... */
+
+    soundwire@3210000 {
+        reg = <0x03210000 0x2000>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        wcd937x_rx: codec@0,4 {
+            compatible = "sdw20217010a00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5>;
+        };
+    };
+
+    soundwire@3230000 {
+        reg = <0x03230000 0x2000>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        wcd937x_tx: codec@0,3 {
+            compatible = "sdw20217010a00";
+            reg = <0 3>;
+            qcom,tx-port-mapping = <1 2 3 4>;
+        };
+    };
+...
diff --git a/dts/upstream/Bindings/sound/qcom,wcd938x.yaml b/dts/upstream/Bindings/sound/qcom,wcd938x.yaml
index cf6c3787adf..10531350c33 100644
--- a/dts/upstream/Bindings/sound/qcom,wcd938x.yaml
+++ b/dts/upstream/Bindings/sound/qcom,wcd938x.yaml
@@ -34,9 +34,10 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     codec {
         compatible = "qcom,wcd9380-codec";
-        reset-gpios = <&tlmm 32 0>;
+        reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
         #sound-dai-cells = <1>;
         qcom,tx-device = <&wcd938x_tx>;
         qcom,rx-device = <&wcd938x_rx>;
diff --git a/dts/upstream/Bindings/sound/qcom,wcd939x.yaml b/dts/upstream/Bindings/sound/qcom,wcd939x.yaml
index 6e76f6a8634..c69291f4d57 100644
--- a/dts/upstream/Bindings/sound/qcom,wcd939x.yaml
+++ b/dts/upstream/Bindings/sound/qcom,wcd939x.yaml
@@ -52,10 +52,10 @@ unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
     codec {
         compatible = "qcom,wcd9390-codec";
-        reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>;
+        reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
         #sound-dai-cells = <1>;
         qcom,tx-device = <&wcd939x_tx>;
         qcom,rx-device = <&wcd939x_rx>;
diff --git a/dts/upstream/Bindings/sound/qcom,wsa883x.yaml b/dts/upstream/Bindings/sound/qcom,wsa883x.yaml
index 8e462cdf001..14d312f9c34 100644
--- a/dts/upstream/Bindings/sound/qcom,wsa883x.yaml
+++ b/dts/upstream/Bindings/sound/qcom,wsa883x.yaml
@@ -32,6 +32,14 @@ properties:
   vdd-supply:
     description: VDD Supply for the Codec
 
+  qcom,port-mapping:
+    description: |
+      Specifies static port mapping between slave and master ports.
+      In the order of slave port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+
   '#thermal-sensor-cells':
     const: 0
 
diff --git a/dts/upstream/Bindings/sound/qcom,wsa8840.yaml b/dts/upstream/Bindings/sound/qcom,wsa8840.yaml
index 22798d22d98..83e0360301e 100644
--- a/dts/upstream/Bindings/sound/qcom,wsa8840.yaml
+++ b/dts/upstream/Bindings/sound/qcom,wsa8840.yaml
@@ -32,6 +32,14 @@ properties:
     description: Powerdown/Shutdown line to use (pin SD_N)
     maxItems: 1
 
+  qcom,port-mapping:
+    description: |
+      Specifies static port mapping between slave and master ports.
+      In the order of slave port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+
   '#sound-dai-cells':
     const: 0
 
diff --git a/dts/upstream/Bindings/sound/rt1019.yaml b/dts/upstream/Bindings/sound/realtek,rt1019.yaml
index 3d5a91a942f..adf5e38f4db 100644
--- a/dts/upstream/Bindings/sound/rt1019.yaml
+++ b/dts/upstream/Bindings/sound/realtek,rt1019.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/rt1019.yaml#
+$id: http://devicetree.org/schemas/sound/realtek,rt1019.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: RT1019 Mono Class-D Audio Amplifier
diff --git a/dts/upstream/Bindings/sound/realtek,rt5514.yaml b/dts/upstream/Bindings/sound/realtek,rt5514.yaml
new file mode 100644
index 00000000000..7fbf7739c37
--- /dev/null
+++ b/dts/upstream/Bindings/sound/realtek,rt5514.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5514.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT5514 audio CODEC
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+description: |
+  This device supports both I2C and SPI.
+
+  Pins on the device (for linking into audio routes) for I2C:
+    * DMIC1L
+    * DMIC1R
+    * DMIC2L
+    * DMIC2R
+    * AMICL
+    * AMICR
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: realtek,rt5514
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Master clock to the CODEC
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+    description: The interrupt number to the cpu.
+
+  realtek,dmic-init-delay-ms:
+    description: Set the DMIC initial delay (ms) to wait it ready for I2C.
+
+  spi-max-frequency: true
+
+  wakeup-source:
+    type: boolean
+    description: Flag to indicate this device can wake system (suspend/resume).
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@57 {
+            compatible = "realtek,rt5514";
+            reg = <0x57>;
+        };
+    };
diff --git a/dts/upstream/Bindings/sound/realtek,rt5631.yaml b/dts/upstream/Bindings/sound/realtek,rt5631.yaml
new file mode 100644
index 00000000000..747a731c44c
--- /dev/null
+++ b/dts/upstream/Bindings/sound/realtek,rt5631.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5631.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ALC5631/RT5631 audio CODEC
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+description: |
+  This device supports I2C only.
+
+  Pins on the device (for linking into audio routes):
+      * SPK_OUT_R_P
+      * SPK_OUT_R_N
+      * SPK_OUT_L_P
+      * SPK_OUT_L_N
+      * HP_OUT_L
+      * HP_OUT_R
+      * AUX_OUT2_LP
+      * AUX_OUT2_RN
+      * AUX_OUT1_LP
+      * AUX_OUT1_RN
+      * AUX_IN_L_JD
+      * AUX_IN_R_JD
+      * MONO_IN_P
+      * MONO_IN_N
+      * MIC1_P
+      * MIC1_N
+      * MIC2_P
+      * MIC2_N
+      * MONO_OUT_P
+      * MONO_OUT_N
+      * MICBIAS1
+      * MICBIAS2
+
+properties:
+  compatible:
+    enum:
+      - realtek,alc5631
+      - realtek,rt5631
+
+  reg:
+    maxItems: 1
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            compatible = "realtek,alc5631";
+            reg = <0x1a>;
+        };
+    };
diff --git a/dts/upstream/Bindings/sound/realtek,rt5645.yaml b/dts/upstream/Bindings/sound/realtek,rt5645.yaml
new file mode 100644
index 00000000000..13f09f1bc80
--- /dev/null
+++ b/dts/upstream/Bindings/sound/realtek,rt5645.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5645.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT5650/RT5645 audio CODEC
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+description: |
+  This device supports I2C only.
+
+  Pins on the device (for linking into audio routes) for RT5645/RT5650:
+    * DMIC L1
+    * DMIC R1
+    * DMIC L2
+    * DMIC R2
+    * IN1P
+    * IN1N
+    * IN2P
+    * IN2N
+    * Haptic Generator
+    * HPOL
+    * HPOR
+    * LOUTL
+    * LOUTR
+    * PDM1L
+    * PDM1R
+    * SPOL
+    * SPOR
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - realtek,rt5645
+      - realtek,rt5650
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: The CODEC's interrupt output.
+
+  avdd-supply:
+    description: Power supply for AVDD, providing 1.8V.
+
+  cpvdd-supply:
+    description: Power supply for CPVDD, providing 3.5V.
+
+  hp-detect-gpios:
+    description: 
+      A GPIO spec for the external headphone detect pin. If jd-mode = 0, we
+      will get the JD status by getting the value of hp-detect-gpios.
+    maxItems: 1
+
+  cbj-sleeve-gpios:
+    description:
+      A GPIO spec to control the external combo jack circuit to tie the
+      sleeve/ring2 contacts to the ground or floating. It could avoid some
+      electric noise from the active speaker jacks.
+    maxItems: 1
+
+  realtek,in2-differential:
+    description:
+      Indicate MIC2 input are differential, rather than single-ended.
+    type: boolean
+
+  realtek,dmic1-data-pin:
+    description: Specify which pin to be used as DMIC1 data pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic1 is not used
+      - 1 # using IN2P pin as dmic1 data pin
+      - 2 # using GPIO6 pin as dmic1 data pin
+      - 3 # using GPIO10 pin as dmic1 data pin
+      - 4 # using GPIO12 pin as dmic1 data pin
+
+  realtek,dmic2-data-pin:
+    description: Specify which pin to be used as DMIC2 data pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic2 is not used
+      - 1 # using IN2N pin as dmic2 data pin
+      - 2 # using GPIO5 pin as dmic2 data pin
+      - 3 # using GPIO11 pin as dmic2 data pin
+
+  realtek,jd-mode:
+    description: The JD mode of rt5645/rt5650.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # rt5645/rt5650 JD function is not used
+      - 1 # Mode-0 (VDD=3.3V), two port jack detection
+      - 2 # Mode-1 (VDD=3.3V), one port jack detection
+      - 3 # Mode-2 (VDD=1.8V), one port jack detection
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - cpvdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "realtek,rt5650";
+            reg = <0x1a>;
+            hp-detect-gpios = <&gpio 19 0>;
+            cbj-sleeve-gpios = <&gpio 20 0>;
+            interrupt-parent = <&gpio>;
+            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+            avdd-supply = <&avdd_reg>;
+            cpvdd-supply = <&cpvdd_supply>;
+            realtek,jd-mode = <3>;
+        };
+    };
diff --git a/dts/upstream/Bindings/sound/realtek,rt5659.yaml b/dts/upstream/Bindings/sound/realtek,rt5659.yaml
new file mode 100644
index 00000000000..1100ffd9a7c
--- /dev/null
+++ b/dts/upstream/Bindings/sound/realtek,rt5659.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5659.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT5659/RT5658 audio CODEC
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+description: |
+  This device supports I2C only.
+
+  Pins on the device (for linking into audio routes) for RT5659/RT5658:
+    * DMIC L1
+    * DMIC R1
+    * DMIC L2
+    * DMIC R2
+    * IN1P
+    * IN1N
+    * IN2P
+    * IN2N
+    * IN3P
+    * IN3N
+    * IN4P
+    * IN4N
+    * HPOL
+    * HPOR
+    * SPOL
+    * SPOR
+    * LOUTL
+    * LOUTR
+    * MONOOUT
+    * PDML
+    * PDMR
+    * SPDIF
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - realtek,rt5659
+      - realtek,rt5658
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  realtek,dmic1-data-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic1 is not used
+      - 1 # using IN2N pin as dmic1 data pin
+      - 2 # using GPIO5 pin as dmic1 data pin
+      - 3 # using GPIO9 pin as dmic1 data pin
+      - 4 # using GPIO11 pin as dmic1 data pin
+    description: Specify which pin to be used as DMIC1 data pin.
+    default: 0
+
+  realtek,dmic2-data-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic2 is not used
+      - 1 # using IN2P pin as dmic2 data pin
+      - 2 # using GPIO6 pin as dmic2 data pin
+      - 3 # using GPIO10 pin as dmic2 data pin
+      - 4 # using GPIO12 pin as dmic2 data pin
+    description: Specify which pin to be used as DMIC2 data pin.
+    default: 0
+
+  realtek,jd-src:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # No JD is used
+      - 1 # using JD3 as JD source
+      - 2 # JD source for Intel HDA header
+    description: Specify which JD source be used.
+    default: 0
+
+  realtek,ldo1-en-gpios:
+    maxItems: 1
+    description: CODEC's LDO1_EN pin.
+
+  realtek,reset-gpios:
+    maxItems: 1
+    description: CODEC's RESET pin.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1b {
+            compatible = "realtek,rt5659";
+            reg = <0x1b>;
+            interrupt-parent = <&gpio>;
+            interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+            realtek,ldo1-en-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/dts/upstream/Bindings/sound/realtek,rt5677.yaml b/dts/upstream/Bindings/sound/realtek,rt5677.yaml
new file mode 100644
index 00000000000..9ce23e58e5e
--- /dev/null
+++ b/dts/upstream/Bindings/sound/realtek,rt5677.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5677.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT5677 audio CODEC
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+description: |
+  This device supports I2C only.
+
+  Pins on the device (for linking into audio routes):
+    * IN1P
+    * IN1N
+    * IN2P
+    * IN2N
+    * MICBIAS1
+    * DMIC1
+    * DMIC2
+    * DMIC3
+    * DMIC4
+    * LOUT1
+    * LOUT2
+    * LOUT3
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: realtek,rt5677
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  realtek,pow-ldo2-gpio:
+    maxItems: 1
+    description: CODEC's POW_LDO2 pin.
+
+  realtek,reset-gpio:
+    maxItems: 1
+    description: CODEC's RESET pin. Active low.
+
+  realtek,gpio-config:
+    description: |
+      Array of six 8bit elements that configures GPIO.
+      0 - floating (reset value)
+      1 - pull down
+      2 - pull up
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+    items:
+      maximum: 2
+
+  realtek,jd1-gpio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # OFF
+      - 1 # GPIO1 for jd1.
+      - 2 # GPIO2 for jd1.
+      - 3 # GPIO3 for jd1.
+    description: Configures GPIO Mic Jack detection 1.
+
+  realtek,jd2-gpio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # OFF
+      - 1 # GPIO4 for jd2.
+      - 2 # GPIO5 for jd2.
+      - 3 # GPIO6 for jd2.
+    description: Configures GPIO Mic Jack detection 2.
+
+  realtek,jd3-gpio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # OFF
+      - 1 # GPIO4 for jd3.
+      - 2 # GPIO5 for jd3.
+      - 3 # GPIO6 for jd3.
+    description: Configures GPIO Mic Jack detection 3.
+
+patternProperties:
+  '^realtek,in[1-2]-differential$':
+    type: boolean
+    description: Indicate MIC1/2 input are differential, rather than
+      single-ended.
+
+  '^realtek,lout[1-3]-differential$':
+    type: boolean
+    description: Indicate LOUT1/2/3 outputs are differential, rather than
+      single-ended.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-controller
+  - '#gpio-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@2c {
+            compatible = "realtek,rt5677";
+            reg = <0x2c>;
+            interrupt-parent = <&gpio>;
+            interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            realtek,pow-ldo2-gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
+            realtek,reset-gpio = <&gpio 3 GPIO_ACTIVE_LOW>;
+            realtek,in1-differential;
+            realtek,gpio-config = <0 0 0 0 0 2>;
+        };
+    };
diff --git a/dts/upstream/Bindings/sound/rt5514.txt b/dts/upstream/Bindings/sound/rt5514.txt
deleted file mode 100644
index d2cc171f22f..00000000000
--- a/dts/upstream/Bindings/sound/rt5514.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-RT5514 audio CODEC
-
-This device supports both I2C and SPI.
-
-Required properties:
-
-- compatible : "realtek,rt5514".
-
-- reg : the I2C address of the device for I2C, the chip select
-        number for SPI.
-
-Optional properties:
-
-- clocks: The phandle of the master clock to the CODEC
-- clock-names: Should be "mclk"
-
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
-	      depends on the interrupt controller.
-
-- realtek,dmic-init-delay-ms
-  Set the DMIC initial delay (ms) to wait it ready for I2C.
-
-Pins on the device (for linking into audio routes) for I2C:
-
-  * DMIC1L
-  * DMIC1R
-  * DMIC2L
-  * DMIC2R
-  * AMICL
-  * AMICR
-
-Example:
-
-rt5514: codec@57 {
-	compatible = "realtek,rt5514";
-	reg = <0x57>;
-};
diff --git a/dts/upstream/Bindings/sound/rt5631.txt b/dts/upstream/Bindings/sound/rt5631.txt
deleted file mode 100644
index 56bc85232c4..00000000000
--- a/dts/upstream/Bindings/sound/rt5631.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-ALC5631/RT5631 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-  - compatible : "realtek,alc5631" or "realtek,rt5631"
-
-  - reg : the I2C address of the device.
-
-Pins on the device (for linking into audio routes):
-
-  * SPK_OUT_R_P
-  * SPK_OUT_R_N
-  * SPK_OUT_L_P
-  * SPK_OUT_L_N
-  * HP_OUT_L
-  * HP_OUT_R
-  * AUX_OUT2_LP
-  * AUX_OUT2_RN
-  * AUX_OUT1_LP
-  * AUX_OUT1_RN
-  * AUX_IN_L_JD
-  * AUX_IN_R_JD
-  * MONO_IN_P
-  * MONO_IN_N
-  * MIC1_P
-  * MIC1_N
-  * MIC2_P
-  * MIC2_N
-  * MONO_OUT_P
-  * MONO_OUT_N
-  * MICBIAS1
-  * MICBIAS2
-
-Example:
-
-alc5631: audio-codec@1a {
-	compatible = "realtek,alc5631";
-	reg = <0x1a>;
-};
-
-or
-
-rt5631: audio-codec@1a {
-	compatible = "realtek,rt5631";
-	reg = <0x1a>;
-};
diff --git a/dts/upstream/Bindings/sound/rt5645.txt b/dts/upstream/Bindings/sound/rt5645.txt
deleted file mode 100644
index c1fa379f5f3..00000000000
--- a/dts/upstream/Bindings/sound/rt5645.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-RT5650/RT5645 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : One of "realtek,rt5645" or "realtek,rt5650".
-
-- reg : The I2C address of the device.
-
-- interrupts : The CODEC's interrupt output.
-
-- avdd-supply: Power supply for AVDD, providing 1.8V.
-
-- cpvdd-supply: Power supply for CPVDD, providing 3.5V.
-
-Optional properties:
-
-- hp-detect-gpios:
-  a GPIO spec for the external headphone detect pin. If jd-mode = 0,
-  we will get the JD status by getting the value of hp-detect-gpios.
-
-- cbj-sleeve-gpios:
-  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
-  contacts to the ground or floating. It could avoid some electric noise from the
-  active speaker jacks.
-
-- realtek,in2-differential
-  Boolean. Indicate MIC2 input are differential, rather than single-ended.
-
-- realtek,dmic1-data-pin
-  0: dmic1 is not used
-  1: using IN2P pin as dmic1 data pin
-  2: using GPIO6 pin as dmic1 data pin
-  3: using GPIO10 pin as dmic1 data pin
-  4: using GPIO12 pin as dmic1 data pin
-
-- realtek,dmic2-data-pin
-  0: dmic2 is not used
-  1: using IN2N pin as dmic2 data pin
-  2: using GPIO5 pin as dmic2 data pin
-  3: using GPIO11 pin as dmic2 data pin
-
--- realtek,jd-mode : The JD mode of rt5645/rt5650
-   0 : rt5645/rt5650 JD function is not used
-   1 : Mode-0 (VDD=3.3V), two port jack detection
-   2 : Mode-1 (VDD=3.3V), one port jack detection
-   3 : Mode-2 (VDD=1.8V), one port jack detection
-
-Pins on the device (for linking into audio routes) for RT5645/RT5650:
-
-  * DMIC L1
-  * DMIC R1
-  * DMIC L2
-  * DMIC R2
-  * IN1P
-  * IN1N
-  * IN2P
-  * IN2N
-  * Haptic Generator
-  * HPOL
-  * HPOR
-  * LOUTL
-  * LOUTR
-  * PDM1L
-  * PDM1R
-  * SPOL
-  * SPOR
-
-Example:
-
-codec: rt5650@1a {
-	compatible = "realtek,rt5650";
-	reg = <0x1a>;
-	hp-detect-gpios = <&gpio 19 0>;
-	cbj-sleeve-gpios = <&gpio 20 0>;
-	interrupt-parent = <&gpio>;
-	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-	realtek,dmic-en = "true";
-	realtek,en-jd-func = "true";
-	realtek,jd-mode = <3>;
-};
diff --git a/dts/upstream/Bindings/sound/rt5659.txt b/dts/upstream/Bindings/sound/rt5659.txt
deleted file mode 100644
index 8f3f62c0226..00000000000
--- a/dts/upstream/Bindings/sound/rt5659.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-RT5659/RT5658 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : One of "realtek,rt5659" or "realtek,rt5658".
-
-- reg : The I2C address of the device.
-
-- interrupts : The CODEC's interrupt output.
-
-Optional properties:
-
-- clocks: The phandle of the master clock to the CODEC
-- clock-names: Should be "mclk"
-
-- realtek,in1-differential
-- realtek,in3-differential
-- realtek,in4-differential
-  Boolean. Indicate MIC1/3/4 input are differential, rather than single-ended.
-
-- realtek,dmic1-data-pin
-  0: dmic1 is not used
-  1: using IN2N pin as dmic1 data pin
-  2: using GPIO5 pin as dmic1 data pin
-  3: using GPIO9 pin as dmic1 data pin
-  4: using GPIO11 pin as dmic1 data pin
-
-- realtek,dmic2-data-pin
-  0: dmic2 is not used
-  1: using IN2P pin as dmic2 data pin
-  2: using GPIO6 pin as dmic2 data pin
-  3: using GPIO10 pin as dmic2 data pin
-  4: using GPIO12 pin as dmic2 data pin
-
-- realtek,jd-src
-  0: No JD is used
-  1: using JD3 as JD source
-  2: JD source for Intel HDA header
-
-- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
-- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
-
-- sound-name-prefix: Please refer to dai-common.yaml
-
-- ports: A Codec may have a single or multiple I2S interfaces. These
-  interfaces on Codec side can be described under 'ports' or 'port'.
-  When the SoC or host device is connected to multiple interfaces of
-  the Codec, the connectivity can be described using 'ports' property.
-  If a single interface is used, then 'port' can be used. The usage
-  depends on the platform or board design.
-  Please refer to Documentation/devicetree/bindings/graph.txt
-
-Pins on the device (for linking into audio routes) for RT5659/RT5658:
-
-  * DMIC L1
-  * DMIC R1
-  * DMIC L2
-  * DMIC R2
-  * IN1P
-  * IN1N
-  * IN2P
-  * IN2N
-  * IN3P
-  * IN3N
-  * IN4P
-  * IN4N
-  * HPOL
-  * HPOR
-  * SPOL
-  * SPOR
-  * LOUTL
-  * LOUTR
-  * MONOOUT
-  * PDML
-  * PDMR
-  * SPDIF
-
-Example:
-
-rt5659 {
-	compatible = "realtek,rt5659";
-	reg = <0x1b>;
-	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
-	realtek,ldo1-en-gpios =
-		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
-};
diff --git a/dts/upstream/Bindings/sound/rt5677.txt b/dts/upstream/Bindings/sound/rt5677.txt
deleted file mode 100644
index da243009918..00000000000
--- a/dts/upstream/Bindings/sound/rt5677.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-RT5677 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "realtek,rt5677".
-
-- reg : The I2C address of the device.
-
-- interrupts : The CODEC's interrupt output.
-
-- gpio-controller : Indicates this device is a GPIO controller.
-
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
-
-Optional properties:
-
-- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
-- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. Active low.
-
-- realtek,in1-differential
-- realtek,in2-differential
-- realtek,lout1-differential
-- realtek,lout2-differential
-- realtek,lout3-differential
-  Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential,
-  rather than single-ended.
-
-- realtek,gpio-config
-  Array of six 8bit elements that configures GPIO.
-    0 - floating (reset value)
-    1 - pull down
-    2 - pull up
-
-- realtek,jd1-gpio
-  Configures GPIO Mic Jack detection 1.
-  Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively.
-
-- realtek,jd2-gpio
-- realtek,jd3-gpio
-  Configures GPIO Mic Jack detection 2 and 3.
-  Select 0 ~ 3 as OFF, GPIO4, GPIO5 and GPIO6 respectively.
-
-Pins on the device (for linking into audio routes):
-
-  * IN1P
-  * IN1N
-  * IN2P
-  * IN2N
-  * MICBIAS1
-  * DMIC1
-  * DMIC2
-  * DMIC3
-  * DMIC4
-  * LOUT1
-  * LOUT2
-  * LOUT3
-
-Example:
-
-rt5677 {
-	compatible = "realtek,rt5677";
-	reg = <0x2c>;
-	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	realtek,pow-ldo2-gpio =
-		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
-	realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
-	realtek,in1-differential = "true";
-	realtek,gpio-config = /bits/ 8  <0 0 0 0 0 2>;   /* pull up GPIO6 */
-	realtek,jd2-gpio = <3>;  /* Enables Jack detection for GPIO6 */
-};
diff --git a/dts/upstream/Bindings/sound/samsung,midas-audio.yaml b/dts/upstream/Bindings/sound/samsung,midas-audio.yaml
index 6ec80f529d8..69ddfd4afdc 100644
--- a/dts/upstream/Bindings/sound/samsung,midas-audio.yaml
+++ b/dts/upstream/Bindings/sound/samsung,midas-audio.yaml
@@ -53,6 +53,9 @@ properties:
   submic-bias-supply:
     description: Supply for the micbias on the Sub microphone
 
+  headset-mic-bias-supply:
+    description: Supply for the micbias on the Headset microphone
+
   fm-sel-gpios:
     maxItems: 1
     description: GPIO pin for FM selection
@@ -61,6 +64,36 @@ properties:
     maxItems: 1
     description: GPIO pin for line out selection
 
+  headset-detect-gpios:
+    maxItems: 1
+    description: GPIO for detection of headset insertion
+
+  headset-key-gpios:
+    maxItems: 1
+    description: GPIO for detection of headset key press
+
+  io-channels:
+    maxItems: 1
+    description: IO channel to read micbias voltage for headset detection
+
+  io-channel-names:
+    const: headset-detect
+
+  samsung,headset-4pole-threshold-microvolt:
+    minItems: 2
+    maxItems: 2
+    description:
+      Array containing minimum and maximum IO channel value for 4-pole
+      (with microphone/button) headsets. If the IO channel value is
+      outside of this range, a 3-pole headset is assumed.
+
+  samsung,headset-button-threshold-microvolt:
+    minItems: 3
+    maxItems: 3
+    description: |
+      Array of minimum (inclusive) IO channel values for headset button
+      detection, in order: "Media", "Volume Up" and "Volume Down".
+
 required:
   - compatible
   - cpu
diff --git a/dts/upstream/Bindings/sound/simple-audio-mux.yaml b/dts/upstream/Bindings/sound/simple-audio-mux.yaml
index 9f319caf3db..194ac1d4f4f 100644
--- a/dts/upstream/Bindings/sound/simple-audio-mux.yaml
+++ b/dts/upstream/Bindings/sound/simple-audio-mux.yaml
@@ -24,6 +24,11 @@ properties:
     description: |
       GPIOs used to select the input line.
 
+  state-labels:
+    description: State of input line. default is "Input 1", "Input 2"
+    $ref: /schemas/types.yaml#/definitions/string-array
+    maxItems: 2
+
   sound-name-prefix: true
 
 required:
@@ -37,4 +42,5 @@ examples:
     mux {
         compatible = "simple-audio-mux";
         mux-gpios = <&gpio 3 0>;
+        state-labels = "Label_A", "Label_B";
     };
diff --git a/dts/upstream/Bindings/sound/spdif-receiver.txt b/dts/upstream/Bindings/sound/spdif-receiver.txt
deleted file mode 100644
index 80f807bf8a1..00000000000
--- a/dts/upstream/Bindings/sound/spdif-receiver.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Device-Tree bindings for dummy spdif receiver
-
-Required properties:
-	- compatible: should be "linux,spdif-dir".
-
-Example node:
-
-	codec: spdif-receiver {
-		compatible = "linux,spdif-dir";
-	};
diff --git a/dts/upstream/Bindings/sound/tas571x.txt b/dts/upstream/Bindings/sound/tas571x.txt
deleted file mode 100644
index 1addc75989d..00000000000
--- a/dts/upstream/Bindings/sound/tas571x.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers
-
-The codec is controlled through an I2C interface.  It also has two other
-signals that can be wired up to GPIOs: reset (strongly recommended), and
-powerdown (optional).
-
-Required properties:
-
-- compatible: should be one of the following:
-  - "ti,tas5707"
-  - "ti,tas5711",
-  - "ti,tas5717",
-  - "ti,tas5719",
-  - "ti,tas5721"
-  - "ti,tas5733"
-- reg: The I2C address of the device
-- #sound-dai-cells: must be equal to 0
-
-Optional properties:
-
-- reset-gpios: GPIO specifier for the TAS571x's active low reset line
-- pdn-gpios: GPIO specifier for the TAS571x's active low powerdown line
-- clocks: clock phandle for the MCLK input
-- clock-names: should be "mclk"
-- AVDD-supply: regulator phandle for the AVDD supply (all chips)
-- DVDD-supply: regulator phandle for the DVDD supply (all chips)
-- HPVDD-supply: regulator phandle for the HPVDD supply (5717/5719)
-- PVDD_AB-supply: regulator phandle for the PVDD_AB supply (5717/5719)
-- PVDD_CD-supply: regulator phandle for the PVDD_CD supply (5717/5719)
-- PVDD_A-supply: regulator phandle for the PVDD_A supply (5711)
-- PVDD_B-supply: regulator phandle for the PVDD_B supply (5711)
-- PVDD_C-supply: regulator phandle for the PVDD_C supply (5711)
-- PVDD_D-supply: regulator phandle for the PVDD_D supply (5711)
-- DRVDD-supply: regulator phandle for the DRVDD supply (5721)
-- PVDD-supply: regulator phandle for the PVDD supply (5721)
-
-Example:
-
-	tas5717: audio-codec@2a {
-		compatible = "ti,tas5717";
-		reg = <0x2a>;
-		#sound-dai-cells = <0>;
-
-		reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-		pdn-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-
-		clocks = <&clk_core CLK_I2S>;
-		clock-names = "mclk";
-	};
diff --git a/dts/upstream/Bindings/sound/ti,omap4-mcpdm.yaml b/dts/upstream/Bindings/sound/ti,omap4-mcpdm.yaml
new file mode 100644
index 00000000000..cdea0a00826
--- /dev/null
+++ b/dts/upstream/Bindings/sound/ti,omap4-mcpdm.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,omap4-mcpdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP McPDM
+
+maintainers:
+  - Misael Lopez Cruz <misael.lopez@ti.com>
+
+description:
+  OMAP ALSA SoC DAI driver using McPDM port used by TWL6040
+
+properties:
+  compatible:
+    const: ti,omap4-mcpdm
+
+  reg:
+    items:
+      - description: MPU access base address
+      - description: L3 interconnect address
+
+  reg-names:
+    items:
+      - const: mpu
+      - const: dma
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: up_link
+      - const: dn_link
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pdmclk
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mcpdm@0 {
+      compatible = "ti,omap4-mcpdm";
+      reg = <0x0 0x7f>, /* MPU private access */
+            <0x49032000 0x7f>; /* L3 Interconnect */
+      reg-names = "mpu", "dma";
+      interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-parent = <&gic>;
+      dmas = <&sdma 65>, <&sdma 66>;
+      dma-names = "up_link", "dn_link";
+      clocks = <&twl6040>;
+      clock-names = "pdmclk";
+    };
diff --git a/dts/upstream/Bindings/sound/tas2562.yaml b/dts/upstream/Bindings/sound/ti,tas2562.yaml
index d28c102c0ce..8bc3b0c7531 100644
--- a/dts/upstream/Bindings/sound/tas2562.yaml
+++ b/dts/upstream/Bindings/sound/ti,tas2562.yaml
@@ -2,7 +2,7 @@
 # Copyright (C) 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/tas2562.yaml#
+$id: http://devicetree.org/schemas/sound/ti,tas2562.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments TAS2562 Smart PA
diff --git a/dts/upstream/Bindings/sound/tas2770.yaml b/dts/upstream/Bindings/sound/ti,tas2770.yaml
index be2536e8c44..362c2e6154f 100644
--- a/dts/upstream/Bindings/sound/tas2770.yaml
+++ b/dts/upstream/Bindings/sound/ti,tas2770.yaml
@@ -2,7 +2,7 @@
 # Copyright (C) 2019-20 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/tas2770.yaml#
+$id: http://devicetree.org/schemas/sound/ti,tas2770.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments TAS2770 Smart PA
diff --git a/dts/upstream/Bindings/sound/tas27xx.yaml b/dts/upstream/Bindings/sound/ti,tas27xx.yaml
index f2d878f6f49..530bc393784 100644
--- a/dts/upstream/Bindings/sound/tas27xx.yaml
+++ b/dts/upstream/Bindings/sound/ti,tas27xx.yaml
@@ -2,7 +2,7 @@
 # Copyright (C) 2020-2022 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/tas27xx.yaml#
+$id: http://devicetree.org/schemas/sound/ti,tas27xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments TAS2764/TAS2780 Smart PA
diff --git a/dts/upstream/Bindings/sound/ti,tas57xx.yaml b/dts/upstream/Bindings/sound/ti,tas57xx.yaml
new file mode 100644
index 00000000000..2f917238db9
--- /dev/null
+++ b/dts/upstream/Bindings/sound/ti,tas57xx.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tas57xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - ti,tas5707
+      - ti,tas5711
+      - ti,tas5717
+      - ti,tas5719
+      - ti,tas5721
+      - ti,tas5733
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO for the active low reset line
+
+  pdn-gpios:
+    maxItems: 1
+    description: GPIO for the active low powerdown line
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  AVDD-supply: true
+  DVDD-supply: true
+  HPVDD-supply: true
+  PVDD_AB-supply: true
+  PVDD_CD-supply: true
+  PVDD_A-supply: true
+  PVDD_B-supply: true
+  PVDD_C-supply: true
+  PVDD_D-supply: true
+  DRVDD-supply: true
+  PVDD-supply: true
+
+  '#sound-dai-cells':
+    const: 0
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas5717
+              - ti,tas5719
+    then:
+      properties:
+        PVDD_A-supply: false
+        PVDD_B-supply: false
+        PVDD_C-supply: false
+        PVDD_D-supply: false
+        DRVDD-supply: false
+        PVDD-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas5711
+    then:
+      properties:
+        HPVDD-supply: false
+        PVDD_AB-supply: false
+        PVDD_CD-supply: false
+        DRVDD-supply: false
+        PVDD-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas5721
+    then:
+      properties:
+        HPVDD-supply: false
+        PVDD_AB-supply: false
+        PVDD_CD-supply: false
+        PVDD_A-supply: false
+        PVDD_B-supply: false
+        PVDD_C-supply: false
+        PVDD_D-supply: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   i2c {
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     codec@2a {
+       compatible = "ti,tas5717";
+       reg = <0x2a>;
+       #sound-dai-cells = <0>;
+       reset-gpios = <&gpio1 15 0>;
+       pdn-gpios = <&gpio1 15 0>;
+       AVDD-supply = <&avdd_supply>;
+       DVDD-supply = <&dvdd_supply>;
+       HPVDD-supply = <&hpvdd_supply>;
+       PVDD_AB-supply = <&pvdd_ab_supply>;
+       PVDD_CD-supply = <&pvdd_cd_supply>;
+     };
+   };
+
+...
diff --git a/dts/upstream/Bindings/sound/tas5805m.yaml b/dts/upstream/Bindings/sound/ti,tas5805m.yaml
index 12c41974274..c2c2835a9e1 100644
--- a/dts/upstream/Bindings/sound/tas5805m.yaml
+++ b/dts/upstream/Bindings/sound/ti,tas5805m.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/tas5805m.yaml#
+$id: http://devicetree.org/schemas/sound/ti,tas5805m.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TAS5805M audio amplifier
diff --git a/dts/upstream/Bindings/sound/ti,tlv320adc3xxx.yaml b/dts/upstream/Bindings/sound/ti,tlv320adc3xxx.yaml
index ede14ca2c07..66b76656229 100644
--- a/dts/upstream/Bindings/sound/ti,tlv320adc3xxx.yaml
+++ b/dts/upstream/Bindings/sound/ti,tlv320adc3xxx.yaml
@@ -58,8 +58,8 @@ properties:
     description: |
       Configuration for DMDIN/GPIO1 pin.
 
-      When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
-      ALSA control "GPIOx Output" to appear, as a switch control.
+      When ADC3XXX_GPIO_GPO is selected, the pin may be controlled via the
+      GPIO framework, as pin number 0 on the device.
 
   ti,dmclk-gpio2:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -76,12 +76,32 @@ properties:
     description: |
       Configuration for DMCLK/GPIO2 pin.
 
-      When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
-      ALSA control "GPIOx Output" to appear, as a switch control.
+      When ADC3XXX_GPIO_GPO is selected, the pin may be controlled via the
+      GPIO framework, as pin number 1 on the device.
 
       Note that there is currently no support for reading the GPIO pins as
       inputs.
 
+  ti,micbias1-gpo:
+    type: boolean
+    description: |
+      When set, the MICBIAS1 pin may be controlled via the GPIO framework,
+      as pin number 3 on the device.
+
+      In this mode, when the pin is activated, it will be set to the voltage
+      specified by the ti,micbias1-vg property. When deactivated, the pin will
+      float.
+
+  ti,micbias2-gpo:
+    type: boolean
+    description: |
+      When set, the MICBIAS2 pin may be controlled via the GPIO framework,
+      as pin number 4 on the device.
+
+      In this mode, when the pin is activated, it will be set to the voltage
+      specified by the ti,micbias2-vg property. When deactivated, the pin will
+      float.
+
   ti,micbias1-vg:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum:
@@ -104,6 +124,10 @@ properties:
     description: |
       Mic bias voltage output on MICBIAS2 pin
 
+dependencies:
+  ti,micbias1-gpo: ['ti,micbias1-vg']
+  ti,micbias2-gpo: ['ti,micbias2-vg']
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/sound/tlv320adcx140.yaml b/dts/upstream/Bindings/sound/ti,tlv320adcx140.yaml
index f3274bcc4c0..876fa97bfbc 100644
--- a/dts/upstream/Bindings/sound/tlv320adcx140.yaml
+++ b/dts/upstream/Bindings/sound/ti,tlv320adcx140.yaml
@@ -2,7 +2,7 @@
 # Copyright (C) 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml#
+$id: http://devicetree.org/schemas/sound/ti,tlv320adcx140.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
diff --git a/dts/upstream/Bindings/sound/wm8750.yaml b/dts/upstream/Bindings/sound/wlf,wm8750.yaml
index 24246ac7bbd..96859e38315 100644
--- a/dts/upstream/Bindings/sound/wm8750.yaml
+++ b/dts/upstream/Bindings/sound/wlf,wm8750.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/wm8750.yaml#
+$id: http://devicetree.org/schemas/sound/wlf,wm8750.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: WM8750 and WM8987 audio CODECs
diff --git a/dts/upstream/Bindings/sound/wlf,wm8782.yaml b/dts/upstream/Bindings/sound/wlf,wm8782.yaml
new file mode 100644
index 00000000000..d0bbdc9f9ce
--- /dev/null
+++ b/dts/upstream/Bindings/sound/wlf,wm8782.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8782.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson Microelectromics WM8782 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8782
+
+  Vdda-supply:
+    description: Regulator for the analog power supply (2.7V - 5.5V)
+
+  Vdd-supply:
+    description: Regulator for the digital power supply (2.7V - 3.6V)
+
+  wlf,fsampen:
+    description: FSAMPEN pin value, 0 for low, 1 for high, 2 for disconnected.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - Vdda-supply
+  - Vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    wm8782: codec {
+        compatible = "wlf,wm8782";
+        Vdda-supply = <&vdda_supply>;
+        Vdd-supply = <&vdd_supply>;
+        wlf,fsampen = <2>;
+    };
diff --git a/dts/upstream/Bindings/sound/wlf,wm8804.yaml b/dts/upstream/Bindings/sound/wlf,wm8804.yaml
new file mode 100644
index 00000000000..3c060179f06
--- /dev/null
+++ b/dts/upstream/Bindings/sound/wlf,wm8804.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8804.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8804 audio codec
+
+description: |
+  This device supports both I2C and SPI (configured with pin strapping on the
+  board).
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  compatible:
+    const: wlf,wm8804
+
+  reg:
+    description:
+      The I2C address of the device for I2C, the chip select number for SPI.
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  PVDD-supply:
+    description: PLL core supply
+
+  DVDD-supply:
+    description: Digital core supply
+
+  wlf,reset-gpio:
+    description: A GPIO specifier for the GPIO controlling the reset pin.
+    maxItems: 1
+
+required:
+  - reg
+  - compatible
+  - PVDD-supply
+  - DVDD-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "wlf,wm8804";
+            reg = <0x1a>;
+            PVDD-supply = <&pvdd_reg>;
+            DVDD-supply = <&dvdd_reg>;
+        };
+    };
diff --git a/dts/upstream/Bindings/sound/wm8782.txt b/dts/upstream/Bindings/sound/wm8782.txt
deleted file mode 100644
index 1a28f328097..00000000000
--- a/dts/upstream/Bindings/sound/wm8782.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-WM8782 stereo ADC
-
-This device does not have any control interface or reset pins.
-
-Required properties:
-
- - compatible  : "wlf,wm8782"
- - Vdda-supply : phandle to a regulator for the analog power supply (2.7V - 5.5V)
- - Vdd-supply  : phandle to a regulator for the digital power supply (2.7V - 3.6V)
-
-Optional properties:
-
- - wlf,fsampen:
-   FSAMPEN pin value, 0 for low, 1 for high, 2 for disconnected.
-   Defaults to 0 if left unspecified.
-
-Example:
-
-wm8782: stereo-adc {
-	compatible = "wlf,wm8782";
-	Vdda-supply = <&vdda_supply>;
-	Vdd-supply = <&vdd_supply>;
-	wlf,fsampen = <2>; /* 192KHz */
-};
diff --git a/dts/upstream/Bindings/sound/wm8804.txt b/dts/upstream/Bindings/sound/wm8804.txt
deleted file mode 100644
index 2c1641c17a9..00000000000
--- a/dts/upstream/Bindings/sound/wm8804.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-WM8804 audio CODEC
-
-This device supports both I2C and SPI (configured with pin strapping
-on the board).
-
-Required properties:
-
-  - compatible : "wlf,wm8804"
-
-  - reg : the I2C address of the device for I2C, the chip select
-          number for SPI.
-
-  - PVDD-supply, DVDD-supply : Power supplies for the device, as covered
-    in Documentation/devicetree/bindings/regulator/regulator.txt
-
-Optional properties:
-
-  - wlf,reset-gpio: A GPIO specifier for the GPIO controlling the reset pin
-
-Example:
-
-wm8804: codec@1a {
-	compatible = "wlf,wm8804";
-	reg = <0x1a>;
-};
diff --git a/dts/upstream/Bindings/spi/amlogic,a1-spifc.yaml b/dts/upstream/Bindings/spi/amlogic,a1-spifc.yaml
index ea47d30eef4..043879b434a 100644
--- a/dts/upstream/Bindings/spi/amlogic,a1-spifc.yaml
+++ b/dts/upstream/Bindings/spi/amlogic,a1-spifc.yaml
@@ -23,6 +23,9 @@ properties:
   clocks:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/spi/atmel,at91rm9200-spi.yaml b/dts/upstream/Bindings/spi/atmel,at91rm9200-spi.yaml
index 32e7c14033c..d29772994cf 100644
--- a/dts/upstream/Bindings/spi/atmel,at91rm9200-spi.yaml
+++ b/dts/upstream/Bindings/spi/atmel,at91rm9200-spi.yaml
@@ -18,10 +18,10 @@ properties:
     oneOf:
       - const: atmel,at91rm9200-spi
       - items:
-          - const: microchip,sam9x60-spi
-          - const: atmel,at91rm9200-spi
-      - items:
-          - const: microchip,sam9x7-spi
+          - enum:
+              - microchip,sam9x60-spi
+              - microchip,sam9x7-spi
+              - microchip,sama7d65-spi
           - const: atmel,at91rm9200-spi
 
   reg:
diff --git a/dts/upstream/Bindings/spi/brcm,bcm2835-spi.txt b/dts/upstream/Bindings/spi/brcm,bcm2835-spi.txt
deleted file mode 100644
index 3d55dd64b1b..00000000000
--- a/dts/upstream/Bindings/spi/brcm,bcm2835-spi.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Broadcom BCM2835 SPI0 controller
-
-The BCM2835 contains two forms of SPI master controller, one known simply as
-SPI0, and the other known as the "Universal SPI Master"; part of the
-auxiliary block. This binding applies to the SPI0 controller.
-
-Required properties:
-- compatible: Should be one of "brcm,bcm2835-spi" for BCM2835/2836/2837 or
-  "brcm,bcm2711-spi" for BCM2711 or "brcm,bcm7211-spi" for BCM7211.
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks: The clock feeding the SPI controller.
-
-Example:
-
-spi@20204000 {
-	compatible = "brcm,bcm2835-spi";
-	reg = <0x7e204000 0x1000>;
-	interrupts = <2 22>;
-	clocks = <&clk_spi>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-};
diff --git a/dts/upstream/Bindings/spi/brcm,bcm2835-spi.yaml b/dts/upstream/Bindings/spi/brcm,bcm2835-spi.yaml
new file mode 100644
index 00000000000..94da6879219
--- /dev/null
+++ b/dts/upstream/Bindings/spi/brcm,bcm2835-spi.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/brcm,bcm2835-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 SPI0 controller
+
+maintainers:
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+  - Kanak Shilledar <kanakshilledar111@protonmail.com>
+  - Stefan Wahren <wahrenst@gmx.net>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-spi
+      - brcm,bcm2711-spi
+      - brcm,bcm7211-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@20204000 {
+        compatible = "brcm,bcm2835-spi";
+        reg = <0x7e204000 0x1000>;
+        interrupts = <2 22>;
+        clocks = <&clk_spi>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/dts/upstream/Bindings/spi/fsl,dspi-peripheral-props.yaml b/dts/upstream/Bindings/spi/fsl,dspi-peripheral-props.yaml
new file mode 100644
index 00000000000..9b62b75e17a
--- /dev/null
+++ b/dts/upstream/Bindings/spi/fsl,dspi-peripheral-props.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl,dspi-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for Freescale DSPI controller
+
+maintainers:
+  - Vladimir Oltean <olteanv@gmail.com>
+
+description:
+  See spi-peripheral-props.yaml for more info.
+
+properties:
+  fsl,spi-cs-sck-delay:
+    deprecated: true
+    description:
+      Delay in nanoseconds between activating chip select and the start of
+      clock signal, at the start of a transfer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  fsl,spi-sck-cs-delay:
+    deprecated: true
+    description:
+      Delay in nanoseconds between stopping the clock signal and
+      deactivating chip select, at the end of a transfer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
diff --git a/dts/upstream/Bindings/spi/fsl,dspi.yaml b/dts/upstream/Bindings/spi/fsl,dspi.yaml
new file mode 100644
index 00000000000..7ca8fceda71
--- /dev/null
+++ b/dts/upstream/Bindings/spi/fsl,dspi.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl,dspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Freescale DSPI controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-dspi
+          - fsl,ls1021a-v1.0-dspi
+          - fsl,ls1012a-dspi
+          - fsl,ls1028a-dspi
+          - fsl,ls1043a-dspi
+          - fsl,ls1046a-dspi
+          - fsl,ls1088a-dspi
+          - fsl,ls2080a-dspi
+          - fsl,ls2085a-dspi
+          - fsl,lx2160a-dspi
+      - items:
+          - enum:
+              - fsl,ls1012a-dspi
+              - fsl,ls1028a-dspi
+              - fsl,ls1043a-dspi
+              - fsl,ls1046a-dspi
+              - fsl,ls1088a-dspi
+          - const: fsl,ls1021a-v1.0-dspi
+      - items:
+          - const: fsl,ls2080a-dspi
+          - const: fsl,ls2085a-dspi
+      - items:
+          - const: fsl,lx2160a-dspi
+          - const: fsl,ls2085a-dspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dspi
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for TX
+      - description: DMA controller phandle and request line for RX
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  spi-num-chipselects:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The number of the chip native chipselect signals.
+      cs-gpios don't count against this number.
+
+  big-endian: true
+
+  bus-num:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: SoC-specific identifier for the SPI controller.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - spi-num-chipselects
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    spi@4002c000 {
+        compatible = "fsl,vf610-dspi";
+        reg = <0x4002c000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks VF610_CLK_DSPI0>;
+        clock-names = "dspi";
+        spi-num-chipselects = <5>;
+        bus-num = <0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_dspi0_1>;
+        big-endian;
+
+        flash@0 {
+                compatible = "jedec,spi-nor";
+                reg = <0>;
+                spi-max-frequency = <16000000>;
+                spi-cpol;
+                spi-cpha;
+                spi-cs-setup-delay-ns = <100>;
+                spi-cs-hold-delay-ns = <50>;
+        };
+    };
diff --git a/dts/upstream/Bindings/spi/ibm,spi-fsi.yaml b/dts/upstream/Bindings/spi/ibm,spi-fsi.yaml
new file mode 100644
index 00000000000..d7fec4c3a80
--- /dev/null
+++ b/dts/upstream/Bindings/spi/ibm,spi-fsi.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/ibm,spi-fsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SPI Controller
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  A SPI controller found on IBM Power processors, accessed over FSI from a
+  service processor. This node will always be a child node of an ibm,fsi2spi
+  node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,spi-fsi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi@0 {
+            compatible = "ibm,spi-fsi";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eeprom@0 {
+                compatible = "atmel,at25";
+                reg = <0>;
+                size = <0x80000>;
+                address-width = <24>;
+                pagesize = <256>;
+                spi-max-frequency = <1000000>;
+            };
+        };
+    };
diff --git a/dts/upstream/Bindings/spi/marvell,mmp2-ssp.yaml b/dts/upstream/Bindings/spi/marvell,mmp2-ssp.yaml
index 5f4f6b5615d..0a1bada8f80 100644
--- a/dts/upstream/Bindings/spi/marvell,mmp2-ssp.yaml
+++ b/dts/upstream/Bindings/spi/marvell,mmp2-ssp.yaml
@@ -10,12 +10,17 @@ title: PXA2xx SSP SPI Controller
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
 
-allOf:
-  - $ref: spi-controller.yaml#
-
 properties:
   compatible:
-    const: marvell,mmp2-ssp
+    enum:
+      - marvell,mmp2-ssp
+      - mrvl,ce4100-ssp
+      - mvrl,pxa168-ssp
+      - mrvl,pxa25x-ssp
+      - mvrl,pxa25x-nssp
+      - mrvl,pxa27x-ssp
+      - mrvl,pxa3xx-ssp
+      - mrvl,pxa910-ssp
 
   interrupts:
     maxItems: 1
@@ -26,6 +31,16 @@ properties:
   clocks:
     maxItems: 1
 
+  dmas:
+    items:
+      - description: Receive DMA
+      - description: Transmit DMA
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
   ready-gpios:
     description: |
       GPIO used to signal a SPI master that the FIFO is filled and we're
@@ -41,6 +56,18 @@ required:
 dependencies:
   ready-gpios: [ spi-slave ]
 
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,mmp2-ssp
+    then:
+      properties:
+        dmas: false
+        dma-names: false
+
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/spi/microchip,mpfs-spi.yaml b/dts/upstream/Bindings/spi/microchip,mpfs-spi.yaml
index 74a817cc7d9..ffa8d1b48f8 100644
--- a/dts/upstream/Bindings/spi/microchip,mpfs-spi.yaml
+++ b/dts/upstream/Bindings/spi/microchip,mpfs-spi.yaml
@@ -13,9 +13,6 @@ description:
 maintainers:
   - Conor Dooley <conor.dooley@microchip.com>
 
-allOf:
-  - $ref: spi-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -43,6 +40,32 @@ required:
   - interrupts
   - clocks
 
+allOf:
+  - $ref: spi-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mpfs-spi
+    then:
+      properties:
+        num-cs:
+          default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mpfs-spi
+      not:
+        required:
+          - cs-gpios
+    then:
+      properties:
+        num-cs:
+          maximum: 1
+
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/spi/snps,dw-apb-ssi.yaml b/dts/upstream/Bindings/spi/snps,dw-apb-ssi.yaml
index fde3776a558..bccd00a1ddd 100644
--- a/dts/upstream/Bindings/spi/snps,dw-apb-ssi.yaml
+++ b/dts/upstream/Bindings/spi/snps,dw-apb-ssi.yaml
@@ -88,6 +88,10 @@ properties:
               - renesas,r9a06g032-spi # RZ/N1D
               - renesas,r9a06g033-spi # RZ/N1S
           - const: renesas,rzn1-spi   # RZ/N1
+      - description: T-HEAD TH1520 SoC SPI Controller
+        items:
+          - const: thead,th1520-spi
+          - const: snps,dw-apb-ssi
 
   reg:
     minItems: 1
diff --git a/dts/upstream/Bindings/spi/spi-cadence.yaml b/dts/upstream/Bindings/spi/spi-cadence.yaml
index d4b61b0e830..8de96abe9da 100644
--- a/dts/upstream/Bindings/spi/spi-cadence.yaml
+++ b/dts/upstream/Bindings/spi/spi-cadence.yaml
@@ -55,6 +55,13 @@ properties:
   label:
     description: Descriptive name of the SPI controller.
 
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: spi
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/spi/spi-fsl-dspi.txt b/dts/upstream/Bindings/spi/spi-fsl-dspi.txt
deleted file mode 100644
index 30a79da9c03..00000000000
--- a/dts/upstream/Bindings/spi/spi-fsl-dspi.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-ARM Freescale DSPI controller
-
-Required properties:
-- compatible : must be one of:
-	"fsl,vf610-dspi",
-	"fsl,ls1021a-v1.0-dspi",
-	"fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls1028a-dspi",
-	"fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"),
-	"fsl,ls2085a-dspi",
-	"fsl,lx2160a-dspi",
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain SPI controller interrupt
-- clocks: from common clock binding: handle to dspi clock.
-- clock-names: from common clock binding: Shall be "dspi".
-- pinctrl-0: pin control group to be used for this controller.
-- pinctrl-names: must contain a "default" entry.
-- spi-num-chipselects : the number of the chipselect signals.
-
-Optional property:
-- big-endian: If present the dspi device's registers are implemented
-  in big endian mode.
-- bus-num : the slave chip chipselect signal number.
-
-Optional SPI slave node properties:
-- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
-  select and the start of clock signal, at the start of a transfer.
-- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
-  signal and deactivating chip select, at the end of a transfer.
-
-Example:
-
-dspi0@4002c000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,vf610-dspi";
-	reg = <0x4002c000 0x1000>;
-	interrupts = <0 67 0x04>;
-	clocks = <&clks VF610_CLK_DSPI0>;
-	clock-names = "dspi";
-	spi-num-chipselects = <5>;
-	bus-num = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dspi0_1>;
-	big-endian;
-
-	sflash: at26df081a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at26df081a";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-		linux,modalias = "m25p80";
-		modal = "at26df081a";
-		fsl,spi-cs-sck-delay = <100>;
-		fsl,spi-sck-cs-delay = <50>;
-	};
-};
-
-
diff --git a/dts/upstream/Bindings/spi/spi-fsl-lpspi.yaml b/dts/upstream/Bindings/spi/spi-fsl-lpspi.yaml
index 2ff17424479..ed1d4aa41b8 100644
--- a/dts/upstream/Bindings/spi/spi-fsl-lpspi.yaml
+++ b/dts/upstream/Bindings/spi/spi-fsl-lpspi.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale Low Power SPI (LPSPI) for i.MX
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 allOf:
   - $ref: /schemas/spi/spi-controller.yaml#
diff --git a/dts/upstream/Bindings/spi/spi-peripheral-props.yaml b/dts/upstream/Bindings/spi/spi-peripheral-props.yaml
index 15938f81fdc..0bb443b8dec 100644
--- a/dts/upstream/Bindings/spi/spi-peripheral-props.yaml
+++ b/dts/upstream/Bindings/spi/spi-peripheral-props.yaml
@@ -122,6 +122,7 @@ properties:
 allOf:
   - $ref: arm,pl022-peripheral-props.yaml#
   - $ref: cdns,qspi-nor-peripheral-props.yaml#
+  - $ref: fsl,dspi-peripheral-props.yaml#
   - $ref: samsung,spi-peripheral-props.yaml#
   - $ref: nvidia,tegra210-quad-peripheral-props.yaml#
 
diff --git a/dts/upstream/Bindings/spi/st,stm32-spi.yaml b/dts/upstream/Bindings/spi/st,stm32-spi.yaml
index a55c8633c32..76e43c0ce36 100644
--- a/dts/upstream/Bindings/spi/st,stm32-spi.yaml
+++ b/dts/upstream/Bindings/spi/st,stm32-spi.yaml
@@ -42,7 +42,7 @@ properties:
   dmas:
     description: |
       DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
-      the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml.
+      the STM32 DMA controllers bindings Documentation/devicetree/bindings/dma/stm32/*.yaml.
     items:
       - description: rx DMA channel
       - description: tx DMA channel
diff --git a/dts/upstream/Bindings/sram/allwinner,sun4i-a10-system-control.yaml b/dts/upstream/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
index cf07b8f787a..d9322704f35 100644
--- a/dts/upstream/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/dts/upstream/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -56,6 +56,9 @@ properties:
   ranges: true
 
 patternProperties:
+  "^regulators@[0-9a-f]+$":
+    $ref: /schemas/regulator/allwinner,sun20i-d1-system-ldos.yaml#
+
   "^sram@[a-f0-9]+":
     $ref: /schemas/sram/sram.yaml#
     unevaluatedProperties: false
@@ -130,3 +133,28 @@ examples:
         };
       };
     };
+
+  - |
+    syscon@3000000 {
+      compatible = "allwinner,sun20i-d1-system-control";
+      reg = <0x3000000 0x1000>;
+      ranges;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      regulators@3000150 {
+        compatible = "allwinner,sun20i-d1-system-ldos";
+        reg = <0x3000150 0x4>;
+
+        reg_ldoa: ldoa {
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+        };
+
+        reg_ldob: ldob {
+          regulator-name = "vcc-dram";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <1500000>;
+        };
+      };
+    };
diff --git a/dts/upstream/Bindings/sram/qcom,imem.yaml b/dts/upstream/Bindings/sram/qcom,imem.yaml
index 8025a852bc9..faef3d6e0a9 100644
--- a/dts/upstream/Bindings/sram/qcom,imem.yaml
+++ b/dts/upstream/Bindings/sram/qcom,imem.yaml
@@ -22,6 +22,7 @@ properties:
           - qcom,msm8974-imem
           - qcom,qcs404-imem
           - qcom,qdu1000-imem
+          - qcom,sa8775p-imem
           - qcom,sc7180-imem
           - qcom,sc7280-imem
           - qcom,sdm630-imem
diff --git a/dts/upstream/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/dts/upstream/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 6b3aea6d73b..dad8de90049 100644
--- a/dts/upstream/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/dts/upstream/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -10,6 +10,8 @@ maintainers:
   - Vasily Khoruzhick <anarsoul@gmail.com>
   - Yangtao Li <tiny.windzz@gmail.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -55,7 +57,6 @@ properties:
     maxItems: 1
     description: phandle to device controlling temperate offset SYS_CFG register
 
-  # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     enum:
       - 0
@@ -135,9 +136,8 @@ required:
   - compatible
   - reg
   - interrupts
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/amlogic,thermal.yaml b/dts/upstream/Bindings/thermal/amlogic,thermal.yaml
index 01fccdfc417..725303e1a36 100644
--- a/dts/upstream/Bindings/thermal/amlogic,thermal.yaml
+++ b/dts/upstream/Bindings/thermal/amlogic,thermal.yaml
@@ -11,6 +11,8 @@ maintainers:
 
 description: Binding for Amlogic Thermal
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -44,17 +46,17 @@ required:
   - clocks
   - amlogic,ao-secure
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        cpu_temp: temperature-sensor@ff634800 {
-                compatible = "amlogic,g12a-cpu-thermal",
-                             "amlogic,g12a-thermal";
-                reg = <0xff634800 0x50>;
-                interrupts = <0x0 0x24 0x0>;
-                clocks = <&clk 164>;
-                #thermal-sensor-cells = <0>;
-                amlogic,ao-secure = <&sec_AO>;
-        };
+    temperature-sensor@ff634800 {
+        compatible = "amlogic,g12a-cpu-thermal",
+                     "amlogic,g12a-thermal";
+        reg = <0xff634800 0x50>;
+        interrupts = <0x0 0x24 0x0>;
+        clocks = <&clk 164>;
+        #thermal-sensor-cells = <0>;
+        amlogic,ao-secure = <&sec_AO>;
+    };
 ...
diff --git a/dts/upstream/Bindings/thermal/brcm,avs-ro-thermal.yaml b/dts/upstream/Bindings/thermal/brcm,avs-ro-thermal.yaml
index 89a2c32c0ab..29a9844e8b4 100644
--- a/dts/upstream/Bindings/thermal/brcm,avs-ro-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -19,30 +19,30 @@ description: |+
   Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: brcm,bcm2711-thermal
 
-  # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     const: 0
 
 required:
   - compatible
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        avs-monitor@7d5d2000 {
-                compatible = "brcm,bcm2711-avs-monitor",
-                             "syscon", "simple-mfd";
-                reg = <0x7d5d2000 0xf00>;
-
-                thermal: thermal {
-                        compatible = "brcm,bcm2711-thermal";
-                        #thermal-sensor-cells = <0>;
-                };
+    avs-monitor@7d5d2000 {
+        compatible = "brcm,bcm2711-avs-monitor",
+                     "syscon", "simple-mfd";
+        reg = <0x7d5d2000 0xf00>;
+
+        thermal: thermal {
+            compatible = "brcm,bcm2711-thermal";
+            #thermal-sensor-cells = <0>;
         };
+    };
 ...
diff --git a/dts/upstream/Bindings/thermal/brcm,avs-tmon.yaml b/dts/upstream/Bindings/thermal/brcm,avs-tmon.yaml
index 267a0f42350..081486b4438 100644
--- a/dts/upstream/Bindings/thermal/brcm,avs-tmon.yaml
+++ b/dts/upstream/Bindings/thermal/brcm,avs-tmon.yaml
@@ -42,15 +42,14 @@ additionalProperties: false
 required:
   - compatible
   - reg
-  - "#thermal-sensor-cells"
 
 examples:
   - |
-     thermal@f04d1500 {
-          compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
-          reg = <0xf04d1500 0x28>;
-          interrupts = <0x6>;
-          interrupt-names = "tmon";
-          interrupt-parent = <&avs_host_l2_intc>;
-          #thermal-sensor-cells = <0>;
-     };
+    thermal@f04d1500 {
+        compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+        reg = <0xf04d1500 0x28>;
+        interrupts = <0x6>;
+        interrupt-names = "tmon";
+        interrupt-parent = <&avs_host_l2_intc>;
+        #thermal-sensor-cells = <0>;
+    };
diff --git a/dts/upstream/Bindings/thermal/brcm,bcm2835-thermal.yaml b/dts/upstream/Bindings/thermal/brcm,bcm2835-thermal.yaml
index 2b6026d9fbc..ddf0f20e528 100644
--- a/dts/upstream/Bindings/thermal/brcm,bcm2835-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/brcm,bcm2835-thermal.yaml
@@ -34,7 +34,6 @@ required:
   - compatible
   - reg
   - clocks
-  - '#thermal-sensor-cells'
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/fsl,scu-thermal.yaml b/dts/upstream/Bindings/thermal/fsl,scu-thermal.yaml
index e02d04d4f71..ceef318668b 100644
--- a/dts/upstream/Bindings/thermal/fsl,scu-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/fsl,scu-thermal.yaml
@@ -28,7 +28,6 @@ properties:
 
 required:
   - compatible
-  - '#thermal-sensor-cells'
 
 additionalProperties: false
 
diff --git a/dts/upstream/Bindings/thermal/generic-adc-thermal.yaml b/dts/upstream/Bindings/thermal/generic-adc-thermal.yaml
index f1fc3b0d860..12e6418dc24 100644
--- a/dts/upstream/Bindings/thermal/generic-adc-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/generic-adc-thermal.yaml
@@ -15,6 +15,8 @@ description:
   sensor resistor. The voltage read across the sensor is mapped to
   temperature using voltage-temperature lookup table.
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: generic-adc-thermal
@@ -44,11 +46,10 @@ properties:
 
 required:
   - compatible
-  - '#thermal-sensor-cells'
   - io-channels
   - io-channel-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/hisilicon,tsensor.yaml b/dts/upstream/Bindings/thermal/hisilicon,tsensor.yaml
new file mode 100644
index 00000000000..11aca2b749d
--- /dev/null
+++ b/dts/upstream/Bindings/thermal/hisilicon,tsensor.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/hisilicon,tsensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sensor on HiSilicon SoCs
+
+maintainers:
+  - Abdulrasaq Lawani <abdulrasaqolawani@gmail.com>
+
+allOf:
+  - $ref: thermal-sensor.yaml
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,tsensor
+      - hisilicon,hi3660-tsensor
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: thermal_clk
+
+  interrupts:
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#thermal-sensor-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi6220-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    temperature-sensor@f7030700 {
+        compatible = "hisilicon,tsensor";
+        reg = <0xf7030700 0x1000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sys_ctrl HI6220_TSENSOR_CLK>;
+        clock-names = "thermal_clk";
+        #thermal-sensor-cells = <1>;
+    };
diff --git a/dts/upstream/Bindings/thermal/hisilicon-thermal.txt b/dts/upstream/Bindings/thermal/hisilicon-thermal.txt
deleted file mode 100644
index 4b19d80e655..00000000000
--- a/dts/upstream/Bindings/thermal/hisilicon-thermal.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Temperature Sensor on hisilicon SoCs
-
-** Required properties :
-
-- compatible: "hisilicon,tsensor".
-- reg: physical base address of thermal sensor and length of memory mapped
-  region.
-- interrupt: The interrupt number to the cpu. Defines the interrupt used
-  by /SOCTHERM/tsensor.
-- clock-names: Input clock name, should be 'thermal_clk'.
-- clocks: phandles for clock specified in "clock-names" property.
-- #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Example :
-
-for Hi6220:
-	tsensor: tsensor@0,f7030700 {
-		compatible = "hisilicon,tsensor";
-		reg = <0x0 0xf7030700 0x0 0x1000>;
-		interrupts = <0 7 0x4>;
-		clocks = <&sys_ctrl HI6220_TSENSOR_CLK>;
-		clock-names = "thermal_clk";
-		#thermal-sensor-cells = <1>;
-	}
-
-for Hi3660:
-	tsensor: tsensor@fff30000 {
-		compatible = "hisilicon,hi3660-tsensor";
-		reg = <0x0 0xfff30000 0x0 0x1000>;
-		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-		#thermal-sensor-cells = <1>;
-	};
diff --git a/dts/upstream/Bindings/thermal/imx-thermal.yaml b/dts/upstream/Bindings/thermal/imx-thermal.yaml
index 808d987bd8d..33756056233 100644
--- a/dts/upstream/Bindings/thermal/imx-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/imx-thermal.yaml
@@ -8,7 +8,6 @@ title: NXP i.MX Thermal
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Anson Huang <Anson.Huang@nxp.com>
 
 properties:
   compatible:
diff --git a/dts/upstream/Bindings/thermal/imx8mm-thermal.yaml b/dts/upstream/Bindings/thermal/imx8mm-thermal.yaml
index d2c1e4573c3..bef0e95e741 100644
--- a/dts/upstream/Bindings/thermal/imx8mm-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/imx8mm-thermal.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NXP i.MX8M Mini Thermal
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 description: |
   i.MX8MM has TMU IP to allow temperature measurement, there are
@@ -16,6 +18,8 @@ description: |
   for i.MX8MM which has ONLY 1 sensor, v2 is for i.MX8MP which has
   2 sensors.
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -51,9 +55,8 @@ required:
   - compatible
   - reg
   - clocks
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/loongson,ls2k-thermal.yaml b/dts/upstream/Bindings/thermal/loongson,ls2k-thermal.yaml
index ca81c8afba7..79e691b0834 100644
--- a/dts/upstream/Bindings/thermal/loongson,ls2k-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/loongson,ls2k-thermal.yaml
@@ -38,7 +38,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - '#thermal-sensor-cells'
 
 if:
   properties:
diff --git a/dts/upstream/Bindings/thermal/mediatek,lvts-thermal.yaml b/dts/upstream/Bindings/thermal/mediatek,lvts-thermal.yaml
index 331cf4e662e..0259cd3ce9c 100644
--- a/dts/upstream/Bindings/thermal/mediatek,lvts-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/mediatek,lvts-thermal.yaml
@@ -99,7 +99,6 @@ required:
   - resets
   - nvmem-cells
   - nvmem-cell-names
-  - "#thermal-sensor-cells"
 
 additionalProperties: false
 
diff --git a/dts/upstream/Bindings/thermal/nvidia,tegra124-soctherm.yaml b/dts/upstream/Bindings/thermal/nvidia,tegra124-soctherm.yaml
index b0237d23602..19bb1f32418 100644
--- a/dts/upstream/Bindings/thermal/nvidia,tegra124-soctherm.yaml
+++ b/dts/upstream/Bindings/thermal/nvidia,tegra124-soctherm.yaml
@@ -197,7 +197,6 @@ required:
   - clock-names
   - resets
   - reset-names
-  - "#thermal-sensor-cells"
 
 allOf:
   - $ref: thermal-sensor.yaml
diff --git a/dts/upstream/Bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml b/dts/upstream/Bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
index c91fd07e406..978b9e6ab8a 100644
--- a/dts/upstream/Bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
@@ -20,11 +20,7 @@ description: |
   node. See ../firmware/nvidia,tegra186-bpmp.yaml for details of the
   BPMP binding.
 
-  This node represents a thermal sensor. See
-
-    Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
-
-  for details of the core thermal binding.
+$ref: thermal-sensor.yaml#
 
 properties:
   compatible:
@@ -33,10 +29,6 @@ properties:
       - nvidia,tegra194-bpmp-thermal
 
   '#thermal-sensor-cells':
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: Number of cells needed in the phandle specifier to
-      identify a given sensor. Must be 1 and the single cell specifies
-      the sensor index.
     const: 1
 
-additionalProperties: false
+unevaluatedProperties: false
diff --git a/dts/upstream/Bindings/thermal/nvidia,tegra30-tsensor.yaml b/dts/upstream/Bindings/thermal/nvidia,tegra30-tsensor.yaml
index a35da257b07..63a29a1f7fe 100644
--- a/dts/upstream/Bindings/thermal/nvidia,tegra30-tsensor.yaml
+++ b/dts/upstream/Bindings/thermal/nvidia,tegra30-tsensor.yaml
@@ -27,6 +27,8 @@ description: |
 
   TSENSOR has two channels which monitor two different spots of the SoC.
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: nvidia,tegra30-tsensor
@@ -46,19 +48,14 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
-  assigned-clock-parents: true
-  assigned-clock-rates: true
-  assigned-clocks: true
-
 required:
   - compatible
   - reg
   - clocks
   - resets
   - interrupts
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/qcom,spmi-temp-alarm.yaml b/dts/upstream/Bindings/thermal/qcom,spmi-temp-alarm.yaml
index 5f08b6e59b8..30b22151aa8 100644
--- a/dts/upstream/Bindings/thermal/qcom,spmi-temp-alarm.yaml
+++ b/dts/upstream/Bindings/thermal/qcom,spmi-temp-alarm.yaml
@@ -42,7 +42,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - '#thermal-sensor-cells'
 
 additionalProperties: false
 
diff --git a/dts/upstream/Bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/dts/upstream/Bindings/thermal/qcom-spmi-adc-tm-hc.yaml
index 7541e27704c..bfad8130a04 100644
--- a/dts/upstream/Bindings/thermal/qcom-spmi-adc-tm-hc.yaml
+++ b/dts/upstream/Bindings/thermal/qcom-spmi-adc-tm-hc.yaml
@@ -8,6 +8,8 @@ title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring
 maintainers:
   - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: qcom,spmi-adc-tm-hc
@@ -20,9 +22,6 @@ properties:
 
   "#thermal-sensor-cells":
     const: 1
-    description:
-      Number of cells required to uniquely identify the thermal sensors. Since
-      we have multiple sensors this is set to 1
 
   "#address-cells":
     const: 1
@@ -106,9 +105,8 @@ required:
   - interrupts
   - "#address-cells"
   - "#size-cells"
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/qcom-spmi-adc-tm5.yaml b/dts/upstream/Bindings/thermal/qcom-spmi-adc-tm5.yaml
index d9d2657287c..4470a5942fb 100644
--- a/dts/upstream/Bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/dts/upstream/Bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -8,6 +8,8 @@ title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
 maintainers:
   - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -23,9 +25,6 @@ properties:
 
   "#thermal-sensor-cells":
     const: 1
-    description:
-      Number of cells required to uniquely identify the thermal sensors. Since
-      we have multiple sensors this is set to 1
 
   "#address-cells":
     const: 1
@@ -159,9 +158,8 @@ required:
   - interrupts
   - "#address-cells"
   - "#size-cells"
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/qcom-tsens.yaml b/dts/upstream/Bindings/thermal/qcom-tsens.yaml
index 99d9c526c0b..72048c5a041 100644
--- a/dts/upstream/Bindings/thermal/qcom-tsens.yaml
+++ b/dts/upstream/Bindings/thermal/qcom-tsens.yaml
@@ -67,6 +67,7 @@ properties:
               - qcom,sm8450-tsens
               - qcom,sm8550-tsens
               - qcom,sm8650-tsens
+              - qcom,x1e80100-tsens
           - const: qcom,tsens-v2
 
       - description: v2 of TSENS with combined interrupt
@@ -217,18 +218,16 @@ properties:
 
   "#thermal-sensor-cells":
     const: 1
-    description:
-      Number of cells required to uniquely identify the thermal sensors. Since
-      we have multiple sensors this is set to 1
 
 required:
   - compatible
   - interrupts
   - interrupt-names
-  - "#thermal-sensor-cells"
   - "#qcom,sensors"
 
 allOf:
+  - $ref: thermal-sensor.yaml#
+
   - if:
       properties:
         compatible:
@@ -292,27 +291,21 @@ allOf:
       required:
         - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    // Example msm9860 based SoC (ipq8064):
-    gcc: clock-controller {
-
-           /* ... */
+    thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
 
-           tsens: thermal-sensor {
-                compatible = "qcom,ipq8064-tsens";
-
-                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
-                 nvmem-cell-names = "calib", "calib_backup";
-                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-                 interrupt-names = "uplow";
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
 
-                 #qcom,sensors = <11>;
-                 #thermal-sensor-cells = <1>;
-          };
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
@@ -349,66 +342,66 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 1 (legacy: for pre v1 IP):
     tsens1: thermal-sensor@4a9000 {
-           compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
-           reg = <0x4a9000 0x1000>, /* TM */
-                 <0x4a8000 0x1000>; /* SROT */
+        compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+        reg = <0x4a9000 0x1000>, /* TM */
+              <0x4a8000 0x1000>; /* SROT */
 
-           nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-           nvmem-cell-names = "calib", "calib_sel";
+        nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+        nvmem-cell-names = "calib", "calib_sel";
 
-           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "uplow";
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
 
-           #qcom,sensors = <5>;
-           #thermal-sensor-cells = <1>;
+        #qcom,sensors = <5>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 2 (for any platform containing v1 of the TSENS IP):
     tsens2: thermal-sensor@4a9000 {
-          compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
-          reg = <0x004a9000 0x1000>, /* TM */
-                <0x004a8000 0x1000>; /* SROT */
+        compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+        reg = <0x004a9000 0x1000>, /* TM */
+              <0x004a8000 0x1000>; /* SROT */
 
-          nvmem-cells = <&tsens_caldata>;
-          nvmem-cell-names = "calib";
+        nvmem-cells = <&tsens_caldata>;
+        nvmem-cell-names = "calib";
 
-          interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
-          interrupt-names = "uplow";
+        interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
 
-          #qcom,sensors = <10>;
-          #thermal-sensor-cells = <1>;
+        #qcom,sensors = <10>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 3 (for any platform containing v2 of the TSENS IP):
     tsens3: thermal-sensor@c263000 {
-           compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
-           reg = <0xc263000 0x1ff>,
-                 <0xc222000 0x1ff>;
+        compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+        reg = <0xc263000 0x1ff>,
+              <0xc222000 0x1ff>;
 
-           interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "uplow", "critical";
+        interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow", "critical";
 
-           #qcom,sensors = <13>;
-           #thermal-sensor-cells = <1>;
+        #qcom,sensors = <13>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 4 (for any IPQ8074 based SoC-s):
     tsens4: thermal-sensor@4a9000 {
-           compatible = "qcom,ipq8074-tsens";
-           reg = <0x4a9000 0x1000>,
-                 <0x4a8000 0x1000>;
+        compatible = "qcom,ipq8074-tsens";
+        reg = <0x4a9000 0x1000>,
+              <0x4a8000 0x1000>;
 
-           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "combined";
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "combined";
 
-           #qcom,sensors = <16>;
-           #thermal-sensor-cells = <1>;
+        #qcom,sensors = <16>;
+        #thermal-sensor-cells = <1>;
     };
 ...
diff --git a/dts/upstream/Bindings/thermal/qoriq-thermal.yaml b/dts/upstream/Bindings/thermal/qoriq-thermal.yaml
index d155d6799da..aa756dae512 100644
--- a/dts/upstream/Bindings/thermal/qoriq-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/qoriq-thermal.yaml
@@ -7,7 +7,11 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
+
+$ref: thermal-sensor.yaml#
 
 properties:
   compatible:
@@ -68,9 +72,8 @@ required:
   - interrupts
   - fsl,tmu-range
   - fsl,tmu-calibration
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/rcar-gen3-thermal.yaml b/dts/upstream/Bindings/thermal/rcar-gen3-thermal.yaml
index 6a81cb6e11b..b6657d64cf3 100644
--- a/dts/upstream/Bindings/thermal/rcar-gen3-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/rcar-gen3-thermal.yaml
@@ -15,6 +15,8 @@ description:
 maintainers:
   - Niklas Söderlund <niklas.soderlund@ragnatech.se>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -57,7 +59,6 @@ required:
   - clocks
   - power-domains
   - resets
-  - "#thermal-sensor-cells"
 
 if:
   properties:
@@ -96,7 +97,7 @@ else:
     required:
       - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -105,33 +106,33 @@ examples:
     #include <dt-bindings/power/r8a7795-sysc.h>
 
     tsc: thermal@e6198000 {
-            compatible = "renesas,r8a7795-thermal";
-            reg = <0xe6198000 0x100>,
-                  <0xe61a0000 0x100>,
-                  <0xe61a8000 0x100>;
-            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 522>;
-            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-            resets = <&cpg 522>;
-            #thermal-sensor-cells = <1>;
+        compatible = "renesas,r8a7795-thermal";
+        reg = <0xe6198000 0x100>,
+              <0xe61a0000 0x100>,
+              <0xe61a8000 0x100>;
+        interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 522>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 522>;
+        #thermal-sensor-cells = <1>;
     };
 
     thermal-zones {
-            sensor_thermal: sensor-thermal {
-                    polling-delay-passive = <250>;
-                    polling-delay = <1000>;
-                    thermal-sensors = <&tsc 0>;
-
-                    trips {
-                            sensor1_crit: sensor1-crit {
-                                    temperature = <90000>;
-                                    hysteresis = <2000>;
-                                    type = "critical";
-                            };
-                    };
+        sensor_thermal: sensor-thermal {
+            polling-delay-passive = <250>;
+            polling-delay = <1000>;
+            thermal-sensors = <&tsc 0>;
+
+            trips {
+                sensor1_crit: sensor1-crit {
+                    temperature = <90000>;
+                    hysteresis = <2000>;
+                    type = "critical";
+                };
             };
+        };
     };
   - |
     #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
@@ -139,14 +140,14 @@ examples:
     #include <dt-bindings/power/r8a779a0-sysc.h>
 
     tsc_r8a779a0: thermal@e6190000 {
-            compatible = "renesas,r8a779a0-thermal";
-            reg = <0xe6190000 0x200>,
-                  <0xe6198000 0x200>,
-                  <0xe61a0000 0x200>,
-                  <0xe61a8000 0x200>,
-                  <0xe61b0000 0x200>;
-            clocks = <&cpg CPG_MOD 919>;
-            power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-            resets = <&cpg 919>;
-            #thermal-sensor-cells = <1>;
+        compatible = "renesas,r8a779a0-thermal";
+        reg = <0xe6190000 0x200>,
+              <0xe6198000 0x200>,
+              <0xe61a0000 0x200>,
+              <0xe61a8000 0x200>,
+              <0xe61b0000 0x200>;
+        clocks = <&cpg CPG_MOD 919>;
+        power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+        resets = <&cpg 919>;
+        #thermal-sensor-cells = <1>;
     };
diff --git a/dts/upstream/Bindings/thermal/rcar-thermal.yaml b/dts/upstream/Bindings/thermal/rcar-thermal.yaml
index 119998d10ff..221a58d18ca 100644
--- a/dts/upstream/Bindings/thermal/rcar-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/rcar-thermal.yaml
@@ -98,8 +98,8 @@ examples:
   # Example (non interrupt support)
   - |
     thermal@ffc48000 {
-            compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
-            reg = <0xffc48000 0x38>;
+        compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+        reg = <0xffc48000 0x38>;
     };
 
   # Example (interrupt support)
@@ -109,12 +109,12 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     thermal@e61f0000 {
-            compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
-            reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
-                  <0xe61f0200 0x38>, <0xe61f0300 0x38>;
-            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
-            power-domains = <&pd_c5>;
+        compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+        reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
+              <0xe61f0200 0x38>, <0xe61f0300 0x38>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+        power-domains = <&pd_c5>;
     };
 
   # Example (with thermal-zone)
@@ -124,32 +124,32 @@ examples:
     #include <dt-bindings/power/r8a7790-sysc.h>
 
     thermal: thermal@e61f0000 {
-      compatible = "renesas,thermal-r8a7790",
-                   "renesas,rcar-gen2-thermal",
-                   "renesas,rcar-thermal";
-            reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
-            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 522>;
-            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-            resets = <&cpg 522>;
-            #thermal-sensor-cells = <0>;
+        compatible = "renesas,thermal-r8a7790",
+                     "renesas,rcar-gen2-thermal",
+                     "renesas,rcar-thermal";
+        reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 522>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 522>;
+        #thermal-sensor-cells = <0>;
     };
 
     thermal-zones {
-            cpu_thermal: cpu-thermal {
-                    polling-delay-passive = <1000>;
-                    polling-delay = <5000>;
-
-                    thermal-sensors = <&thermal>;
-
-                    trips {
-                            cpu-crit {
-                                    temperature = <115000>;
-                                    hysteresis = <0>;
-                                    type = "critical";
-                            };
-                    };
-                    cooling-maps {
-                    };
+        cpu_thermal: cpu-thermal {
+            polling-delay-passive = <1000>;
+            polling-delay = <5000>;
+
+            thermal-sensors = <&thermal>;
+
+            trips {
+                cpu-crit {
+                    temperature = <115000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
             };
+            cooling-maps {
+            };
+        };
     };
diff --git a/dts/upstream/Bindings/thermal/rockchip-thermal.yaml b/dts/upstream/Bindings/thermal/rockchip-thermal.yaml
index 55f8ec0bec0..b717ea8261c 100644
--- a/dts/upstream/Bindings/thermal/rockchip-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/rockchip-thermal.yaml
@@ -9,6 +9,8 @@ title: Temperature Sensor ADC (TSADC) on Rockchip SoCs
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -76,9 +78,8 @@ required:
   - clocks
   - clock-names
   - resets
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/rzg2l-thermal.yaml b/dts/upstream/Bindings/thermal/rzg2l-thermal.yaml
index 03f4b926e53..136589f5ade 100644
--- a/dts/upstream/Bindings/thermal/rzg2l-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/rzg2l-thermal.yaml
@@ -13,6 +13,8 @@ description:
 maintainers:
   - Biju Das <biju.das.jz@bp.renesas.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     items:
@@ -43,36 +45,35 @@ required:
   - clocks
   - power-domains
   - resets
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/r9a07g044-cpg.h>
 
     tsu: thermal@10059400 {
-            compatible = "renesas,r9a07g044-tsu",
-                         "renesas,rzg2l-tsu";
-            reg = <0x10059400 0x400>;
-            clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
-            resets = <&cpg R9A07G044_TSU_PRESETN>;
-            power-domains = <&cpg>;
-            #thermal-sensor-cells = <1>;
+        compatible = "renesas,r9a07g044-tsu",
+                     "renesas,rzg2l-tsu";
+        reg = <0x10059400 0x400>;
+        clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+        resets = <&cpg R9A07G044_TSU_PRESETN>;
+        power-domains = <&cpg>;
+        #thermal-sensor-cells = <1>;
     };
 
     thermal-zones {
-            cpu-thermal {
-                    polling-delay-passive = <250>;
-                    polling-delay = <1000>;
-                    thermal-sensors = <&tsu 0>;
-
-                    trips {
-                            sensor_crit: sensor-crit {
-                                    temperature = <125000>;
-                                    hysteresis = <1000>;
-                                    type = "critical";
-                            };
-                    };
+        cpu-thermal {
+            polling-delay-passive = <250>;
+            polling-delay = <1000>;
+            thermal-sensors = <&tsu 0>;
+
+            trips {
+                sensor_crit: sensor-crit {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
             };
+        };
     };
diff --git a/dts/upstream/Bindings/thermal/samsung,exynos-thermal.yaml b/dts/upstream/Bindings/thermal/samsung,exynos-thermal.yaml
index 1344df708e2..29a08b0729e 100644
--- a/dts/upstream/Bindings/thermal/samsung,exynos-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/samsung,exynos-thermal.yaml
@@ -61,7 +61,8 @@ properties:
           TRIMINFO at 0x10068000 contains data for TMU channel 2
     minItems: 1
 
-  '#thermal-sensor-cells': true
+  '#thermal-sensor-cells':
+    const: 0
 
   vtmu-supply:
     description: The regulator node supplying voltage to TMU.
diff --git a/dts/upstream/Bindings/thermal/socionext,uniphier-thermal.yaml b/dts/upstream/Bindings/thermal/socionext,uniphier-thermal.yaml
index 6f975821fa5..8210b707972 100644
--- a/dts/upstream/Bindings/thermal/socionext,uniphier-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/socionext,uniphier-thermal.yaml
@@ -14,6 +14,8 @@ description: |
 maintainers:
   - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -38,9 +40,8 @@ properties:
 required:
   - compatible
   - interrupts
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/sprd-thermal.yaml b/dts/upstream/Bindings/thermal/sprd-thermal.yaml
index 76aaa004c8a..afa551f6185 100644
--- a/dts/upstream/Bindings/thermal/sprd-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/sprd-thermal.yaml
@@ -11,6 +11,8 @@ maintainers:
   - Baolin Wang <baolin.wang7@gmail.com>
   - Chunyan Zhang <zhang.lyra@gmail.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: sprd,ums512-thermal
@@ -77,35 +79,34 @@ required:
   - clock-names
   - nvmem-cells
   - nvmem-cell-names
-  - "#thermal-sensor-cells"
   - "#address-cells"
   - "#size-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        ap_thm0: thermal@32200000 {
-                compatible = "sprd,ums512-thermal";
-                reg = <0x32200000 0x10000>;
-                clock-names = "enable";
-                clocks = <&aonapb_gate 32>;
-                #thermal-sensor-cells = <1>;
-                nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
-                nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                prometheus-sensor@0 {
-                        reg = <0>;
-                        nvmem-cells = <&thm0_sen0>;
-                        nvmem-cell-names = "sen_delta_cal";
-                };
-
-                ank-sensor@1 {
-                        reg = <1>;
-                        nvmem-cells = <&thm0_sen1>;
-                        nvmem-cell-names = "sen_delta_cal";
-                };
+    thermal@32200000 {
+        compatible = "sprd,ums512-thermal";
+        reg = <0x32200000 0x10000>;
+        clock-names = "enable";
+        clocks = <&aonapb_gate 32>;
+        #thermal-sensor-cells = <1>;
+        nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
+        nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        prometheus-sensor@0 {
+            reg = <0>;
+            nvmem-cells = <&thm0_sen0>;
+            nvmem-cell-names = "sen_delta_cal";
+        };
+
+        ank-sensor@1 {
+            reg = <1>;
+            nvmem-cells = <&thm0_sen1>;
+            nvmem-cell-names = "sen_delta_cal";
         };
+    };
 ...
diff --git a/dts/upstream/Bindings/thermal/st,stm32-thermal.yaml b/dts/upstream/Bindings/thermal/st,stm32-thermal.yaml
index ab043084f66..1c01a80a0cd 100644
--- a/dts/upstream/Bindings/thermal/st,stm32-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/st,stm32-thermal.yaml
@@ -9,6 +9,8 @@ title: STMicroelectronics STM32 digital thermal sensor (DTS)
 maintainers:
   - Pascal Paillet <p.paillet@foss.st.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: st,stm32-thermal
@@ -30,14 +32,13 @@ properties:
     const: 0
 
 required:
-  - "#thermal-sensor-cells"
   - compatible
   - reg
   - interrupts
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/thermal/thermal-zones.yaml b/dts/upstream/Bindings/thermal/thermal-zones.yaml
index 68398e7e865..0f435be1dbd 100644
--- a/dts/upstream/Bindings/thermal/thermal-zones.yaml
+++ b/dts/upstream/Bindings/thermal/thermal-zones.yaml
@@ -49,7 +49,10 @@ properties:
       to take when the temperature crosses those thresholds.
 
 patternProperties:
-  "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
+  # Node name is limited in size due to Linux kernel requirements - 19
+  # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL
+  # byte):
+  "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$":
     type: object
     description:
       Each thermal zone node contains information about how frequently it
@@ -229,7 +232,6 @@ patternProperties:
 
     required:
       - thermal-sensors
-      - trips
 
     additionalProperties: false
 
diff --git a/dts/upstream/Bindings/thermal/ti,am654-thermal.yaml b/dts/upstream/Bindings/thermal/ti,am654-thermal.yaml
index 7ed0abe9290..c123d907052 100644
--- a/dts/upstream/Bindings/thermal/ti,am654-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/ti,am654-thermal.yaml
@@ -9,6 +9,8 @@ title: Texas Instruments AM654 VTM (DTS)
 maintainers:
   - Keerthy <j-keerthy@ti.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: ti,am654-vtm
@@ -26,9 +28,8 @@ required:
   - compatible
   - reg
   - power-domains
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -46,11 +47,11 @@ examples:
         thermal-sensors = <&vtm0 0>;
 
         trips {
-                mpu0_crit: mpu0_crit {
-                        temperature = <125000>; /* milliCelsius */
-                        hysteresis = <2000>; /* milliCelsius */
-                        type = "critical";
-                };
+            mpu0_crit: mpu0_crit {
+                temperature = <125000>; /* milliCelsius */
+                hysteresis = <2000>; /* milliCelsius */
+                type = "critical";
+            };
         };
     };
 ...
diff --git a/dts/upstream/Bindings/thermal/ti,j72xx-thermal.yaml b/dts/upstream/Bindings/thermal/ti,j72xx-thermal.yaml
index 171b3622ed8..82b77b9795a 100644
--- a/dts/upstream/Bindings/thermal/ti,j72xx-thermal.yaml
+++ b/dts/upstream/Bindings/thermal/ti,j72xx-thermal.yaml
@@ -22,6 +22,8 @@ description: |
   Temp(C) = (-9.2627e-12) * x^4 + (6.0373e-08) * x^3 + \
             (-1.7058e-04) * x^2 + (3.2512e-01) * x   + (-4.9003e+01)
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -64,9 +66,8 @@ required:
   - compatible
   - reg
   - power-domains
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/timer/realtek,otto-timer.yaml b/dts/upstream/Bindings/timer/realtek,otto-timer.yaml
new file mode 100644
index 00000000000..7b6ec2c6948
--- /dev/null
+++ b/dts/upstream/Bindings/timer/realtek,otto-timer.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/realtek,otto-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto SoCs Timer/Counter
+
+description:
+  Realtek SoCs support a number of timers/counters. These are used
+  as a per CPU clock event generator and an overall CPU clocksource.
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  $nodename:
+    pattern: "^timer@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - realtek,rtl9302-timer
+      - const: realtek,otto-timer
+
+  reg:
+    items:
+      - description: timer0 registers
+      - description: timer1 registers
+      - description: timer2 registers
+      - description: timer3 registers
+      - description: timer4 registers
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: timer0 interrupt
+      - description: timer1 interrupt
+      - description: timer2 interrupt
+      - description: timer3 interrupt
+      - description: timer4 interrupt
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@3200 {
+      compatible = "realtek,rtl9302-timer", "realtek,otto-timer";
+      reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>,
+            <0x3230 0x10>, <0x3240 0x10>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <7>, <8>, <9>, <10>, <11>;
+      clocks = <&lx_clk>;
+    };
diff --git a/dts/upstream/Bindings/timer/renesas,tmu.yaml b/dts/upstream/Bindings/timer/renesas,tmu.yaml
index 360a5cf1ae9..75b0e7c70b6 100644
--- a/dts/upstream/Bindings/timer/renesas,tmu.yaml
+++ b/dts/upstream/Bindings/timer/renesas,tmu.yaml
@@ -21,13 +21,24 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,tmu-r8a73a4  # R-Mobile APE6
           - renesas,tmu-r8a7740  # R-Mobile A1
+          - renesas,tmu-r8a7742  # RZ/G1H
+          - renesas,tmu-r8a7743  # RZ/G1M
+          - renesas,tmu-r8a7744  # RZ/G1N
+          - renesas,tmu-r8a7745  # RZ/G1E
+          - renesas,tmu-r8a77470 # RZ/G1C
           - renesas,tmu-r8a774a1 # RZ/G2M
           - renesas,tmu-r8a774b1 # RZ/G2N
           - renesas,tmu-r8a774c0 # RZ/G2E
           - renesas,tmu-r8a774e1 # RZ/G2H
           - renesas,tmu-r8a7778  # R-Car M1A
           - renesas,tmu-r8a7779  # R-Car H1
+          - renesas,tmu-r8a7790  # R-Car H2
+          - renesas,tmu-r8a7791  # R-Car M2-W
+          - renesas,tmu-r8a7792  # R-Car V2H
+          - renesas,tmu-r8a7793  # R-Car M2-N
+          - renesas,tmu-r8a7794  # R-Car E2
           - renesas,tmu-r8a7795  # R-Car H3
           - renesas,tmu-r8a7796  # R-Car M3-W
           - renesas,tmu-r8a77961 # R-Car M3-W+
@@ -84,6 +95,7 @@ required:
   - compatible
   - reg
   - interrupts
+  - interrupt-names
   - clocks
   - clock-names
   - power-domains
@@ -94,6 +106,7 @@ if:
       compatible:
         contains:
           enum:
+            - renesas,tmu-r8a73a4
             - renesas,tmu-r8a7740
             - renesas,tmu-r8a7778
             - renesas,tmu-r8a7779
diff --git a/dts/upstream/Bindings/timer/sifive,clint.yaml b/dts/upstream/Bindings/timer/sifive,clint.yaml
index fced6f2d8ec..b42d43d2de4 100644
--- a/dts/upstream/Bindings/timer/sifive,clint.yaml
+++ b/dts/upstream/Bindings/timer/sifive,clint.yaml
@@ -40,6 +40,7 @@ properties:
               - allwinner,sun20i-d1-clint
               - sophgo,cv1800b-clint
               - sophgo,cv1812h-clint
+              - sophgo,sg2002-clint
               - thead,th1520-clint
           - const: thead,c900-clint
       - items:
diff --git a/dts/upstream/Bindings/timer/sprd,sc9860-timer.yaml b/dts/upstream/Bindings/timer/sprd,sc9860-timer.yaml
new file mode 100644
index 00000000000..62c6da8bab5
--- /dev/null
+++ b/dts/upstream/Bindings/timer/sprd,sc9860-timer.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/sprd,sc9860-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC9860 timer
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description:
+  The Spreadtrum SC9860 platform provides 3 general-purpose timers.
+  These timers can support 32bit or 64bit counter, as well as supporting
+  period mode or one-shot mode, and they can be a wakeup source
+  during deep sleep.
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc9860-timer
+      - sprd,sc9860-suspend-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sprd,sc9860-timer
+    then:
+      required:
+        - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      timer@40050000 {
+        compatible = "sprd,sc9860-timer";
+        reg = <0 0x40050000 0 0x20>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ext_32k>;
+      };
+    };
+...
diff --git a/dts/upstream/Bindings/timer/spreadtrum,sprd-timer.txt b/dts/upstream/Bindings/timer/spreadtrum,sprd-timer.txt
deleted file mode 100644
index 6d97e7d0f6e..00000000000
--- a/dts/upstream/Bindings/timer/spreadtrum,sprd-timer.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Spreadtrum timers
-
-The Spreadtrum SC9860 platform provides 3 general-purpose timers.
-These timers can support 32bit or 64bit counter, as well as supporting
-period mode or one-shot mode, and they are can be wakeup source
-during deep sleep.
-
-Required properties:
-- compatible: should be "sprd,sc9860-timer" for SC9860 platform.
-- reg: The register address of the timer device.
-- interrupts: Should contain the interrupt for the timer device.
-- clocks: The phandle to the source clock (usually a 32.768 KHz fixed clock).
-
-Example:
-	timer@40050000 {
-		compatible = "sprd,sc9860-timer";
-		reg = <0 0x40050000 0 0x20>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&ext_32k>;
-	};
diff --git a/dts/upstream/Bindings/trivial-devices.yaml b/dts/upstream/Bindings/trivial-devices.yaml
index 0a419453d18..7913ca9b6b5 100644
--- a/dts/upstream/Bindings/trivial-devices.yaml
+++ b/dts/upstream/Bindings/trivial-devices.yaml
@@ -168,6 +168,8 @@ properties:
           - isil,isl69269
             # Intersil ISL76682 Ambient Light Sensor
           - isil,isl76682
+            # JEDEC JESD300 (SPD5118) Hub and Serial Presence Detect
+          - jedec,spd5118
             # Linear Technology LTC2488
           - lineartechnology,ltc2488
             # 5 Bit Programmable, Pulse-Width Modulator
@@ -286,14 +288,22 @@ properties:
           - mps,mp2857
             # Monolithic Power Systems Inc. multi-phase controller mp2888
           - mps,mp2888
+            # Monolithic Power Systems Inc. multi-phase controller mp2891
+          - mps,mp2891
             # Monolithic Power Systems Inc. multi-phase controller mp2971
           - mps,mp2971
             # Monolithic Power Systems Inc. multi-phase controller mp2973
           - mps,mp2973
             # Monolithic Power Systems Inc. multi-phase controller mp2975
           - mps,mp2975
+            # Monolithic Power Systems Inc. multi-phase controller mp2993
+          - mps,mp2993
+            # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5920
+          - mps,mp5920
             # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
           - mps,mp5990
+            # Monolithic Power Systems Inc. digital step-down converter mp9941
+          - mps,mp9941
             # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
           - mps,mpq8785
             # Temperature sensor with integrated fan control
@@ -318,7 +328,9 @@ properties:
           - renesas,hs3001
             # Renesas ISL29501 time-of-flight sensor
           - renesas,isl29501
-            # Rohm DH2228FV
+            # Rohm BH2228FV 8 channel DAC
+          - rohm,bh2228fv
+            # Rohm DH2228FV - This device does not exist, use rohm,bh2228fv instead.
           - rohm,dh2228fv
             # S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
           - samsung,24ad0xd1
@@ -354,6 +366,8 @@ properties:
           - sparkfun,qwiic-joystick
             # i2c serial eeprom (24cxx)
           - st,24c256
+            # Sierra Wireless mangOH Green SPI IoT interface
+          - swir,mangoh-iotport-spi
             # Ambient Light Sensor with SMBUS/Two Wire Serial Interface
           - taos,tsl2550
             # Temperature Monitoring and Fan Control
diff --git a/dts/upstream/Bindings/ufs/qcom,ufs.yaml b/dts/upstream/Bindings/ufs/qcom,ufs.yaml
index cd3680dc002..25a5edeea16 100644
--- a/dts/upstream/Bindings/ufs/qcom,ufs.yaml
+++ b/dts/upstream/Bindings/ufs/qcom,ufs.yaml
@@ -46,11 +46,11 @@ properties:
 
   clocks:
     minItems: 7
-    maxItems: 11
+    maxItems: 9
 
   clock-names:
     minItems: 7
-    maxItems: 11
+    maxItems: 9
 
   dma-coherent: true
 
@@ -217,16 +217,14 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 11
-          maxItems: 11
+          minItems: 9
+          maxItems: 9
         clock-names:
           items:
-            - const: core_clk_src
             - const: core_clk
             - const: bus_clk
             - const: bus_aggr_clk
             - const: iface_clk
-            - const: core_clk_unipro_src
             - const: core_clk_unipro
             - const: core_clk_ice
             - const: ref_clk
@@ -287,7 +285,7 @@ allOf:
           maxItems: 2
         clocks:
           minItems: 7
-          maxItems: 11
+          maxItems: 9
 
 unevaluatedProperties: false
 
diff --git a/dts/upstream/Bindings/usb/cdns,usb3.yaml b/dts/upstream/Bindings/usb/cdns,usb3.yaml
index 69a93a0722f..f454ddd9bba 100644
--- a/dts/upstream/Bindings/usb/cdns,usb3.yaml
+++ b/dts/upstream/Bindings/usb/cdns,usb3.yaml
@@ -42,8 +42,11 @@ properties:
       - const: otg
       - const: wakeup
 
-  dr_mode:
-    enum: [host, otg, peripheral]
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      This port is used with the 'usb-role-switch' property to connect the
+      cdns3 to type C connector.
 
   maximum-speed:
     enum: [super-speed, high-speed, full-speed]
@@ -70,6 +73,9 @@ properties:
     description: Enable resetting of PHY if Rx fail is detected
     type: boolean
 
+dependencies:
+  port: [ usb-role-switch ]
+
 required:
   - compatible
   - reg
@@ -77,7 +83,10 @@ required:
   - interrupts
   - interrupt-names
 
-additionalProperties: false
+allOf:
+  - $ref: usb-drd.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/usb/dwc2.yaml b/dts/upstream/Bindings/usb/dwc2.yaml
index 4f36a22aa6d..a5f2e3442a0 100644
--- a/dts/upstream/Bindings/usb/dwc2.yaml
+++ b/dts/upstream/Bindings/usb/dwc2.yaml
@@ -188,7 +188,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/dts/upstream/Bindings/usb/fsl,usb2.yaml b/dts/upstream/Bindings/usb/fsl,usb2.yaml
new file mode 100644
index 00000000000..caedf11db28
--- /dev/null
+++ b/dts/upstream/Bindings/usb/fsl,usb2.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SOC USB controllers
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The device node for a USB controller that is part of a Freescale
+  SOC is as described in the document "Open Firmware Recommended
+  Practice: Universal Serial Bus" with the following modifications
+  and additions.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl-usb2-mph
+          - fsl-usb2-dr
+      - items:
+          - enum:
+              - fsl-usb2-dr-v2.2
+              - fsl-usb2-dr-v2.5
+          - const: fsl-usb2-dr
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy_type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ulpi, serial, utmi, utmi_wide]
+
+  port0:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates port0 is connected for fsl-usb2-mph compatible controllers.
+
+  port1:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates port1 is connected for "fsl-usb2-mph" compatible controllers.
+
+  fsl,invert-drvvbus:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      for MPC5121 USB0 only. Indicates the
+      port power polarity of internal PHY signal DRVVBUS is inverted.
+
+  fsl,invert-pwr-fault:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      for MPC5121 USB0 only. Indicates
+      the PWR_FAULT signal polarity is inverted.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy_type
+
+allOf:
+  - $ref: usb-drd.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb@22000 {
+        compatible = "fsl-usb2-mph";
+        reg = <22000 1000>;
+        interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+        phy_type = "ulpi";
+        port0;
+        port1;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb@23000 {
+        compatible = "fsl-usb2-dr";
+        reg = <23000 1000>;
+        interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+        dr_mode = "otg";
+        phy_type = "ulpi";
+    };
diff --git a/dts/upstream/Bindings/usb/fsl-usb.txt b/dts/upstream/Bindings/usb/fsl-usb.txt
deleted file mode 100644
index 0b08b006c5e..00000000000
--- a/dts/upstream/Bindings/usb/fsl-usb.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Freescale SOC USB controllers
-
-The device node for a USB controller that is part of a Freescale
-SOC is as described in the document "Open Firmware Recommended
-Practice : Universal Serial Bus" with the following modifications
-and additions :
-
-Required properties :
- - compatible : Should be "fsl-usb2-mph" for multi port host USB
-   controllers, or "fsl-usb2-dr" for dual role USB controllers
-   or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121.
-   Wherever applicable, the IP version of the USB controller should
-   also be mentioned (for eg. fsl-usb2-dr-v2.2 for bsc9132).
- - phy_type : For multi port host USB controllers, should be one of
-   "ulpi", or "serial". For dual role USB controllers, should be
-   one of "ulpi", "utmi", "utmi_wide", or "serial".
- - reg : Offset and length of the register set for the device
- - port0 : boolean; if defined, indicates port0 is connected for
-   fsl-usb2-mph compatible controllers.  Either this property or
-   "port1" (or both) must be defined for "fsl-usb2-mph" compatible
-   controllers.
- - port1 : boolean; if defined, indicates port1 is connected for
-   fsl-usb2-mph compatible controllers.  Either this property or
-   "port0" (or both) must be defined for "fsl-usb2-mph" compatible
-   controllers.
- - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible
-   controllers.  Can be "host", "peripheral", or "otg".  Default to
-   "host" if not defined for backward compatibility.
-
-Recommended properties :
- - interrupts : <a b> where a is the interrupt number and b is a
-   field that represents an encoding of the sense and level
-   information for the interrupt.  This should be encoded based on
-   the information in section 2) depending on the type of interrupt
-   controller you have.
-
-Optional properties :
- - fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the
-   port power polarity of internal PHY signal DRVVBUS is inverted.
- - fsl,invert-pwr-fault : boolean; for MPC5121 USB0 only. Indicates
-   the PWR_FAULT signal polarity is inverted.
-
-Example multi port host USB controller device node :
-	usb@22000 {
-		compatible = "fsl-usb2-mph";
-		reg = <22000 1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupt-parent = <700>;
-		interrupts = <27 1>;
-		phy_type = "ulpi";
-		port0;
-		port1;
-	};
-
-Example dual role USB controller device node :
-	usb@23000 {
-		compatible = "fsl-usb2-dr";
-		reg = <23000 1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupt-parent = <700>;
-		interrupts = <26 1>;
-		dr_mode = "otg";
-		phy = "ulpi";
-	};
-
-Example dual role USB controller device node for MPC5121ADS:
-
-	usb@4000 {
-		compatible = "fsl,mpc5121-usb2-dr";
-		reg = <0x4000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupt-parent = < &ipic >;
-		interrupts = <44 0x8>;
-		dr_mode = "otg";
-		phy_type = "utmi_wide";
-		fsl,invert-drvvbus;
-		fsl,invert-pwr-fault;
-	};
diff --git a/dts/upstream/Bindings/usb/genesys,gl850g.yaml b/dts/upstream/Bindings/usb/genesys,gl850g.yaml
index 37cf5249e52..fc833363cfb 100644
--- a/dts/upstream/Bindings/usb/genesys,gl850g.yaml
+++ b/dts/upstream/Bindings/usb/genesys,gl850g.yaml
@@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
 maintainers:
   - Icenowy Zheng <uwu@icenowy.me>
 
-allOf:
-  - $ref: usb-device.yaml#
-
 properties:
   compatible:
     enum:
@@ -27,17 +24,44 @@ properties:
 
   vdd-supply:
     description:
-      the regulator that provides 3.3V core power to the hub.
+      The regulator that provides 3.3V or 5.0V core power to the hub.
 
   peer-hub:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      phandle to the peer hub on the controller.
+      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
+      with shared resets and power supplies, this property is used to identify
+      the hubs with which these are shared.
 
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-device.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,608
+    then:
+      properties:
+        peer-hub: false
+        vdd-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,610
+              - usb5e3,620
+    then:
+      properties:
+        peer-hub: true
+        vdd-supply: true
+
 additionalProperties: false
 
 examples:
@@ -54,3 +78,29 @@ examples:
             reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb5e3,610";
+            reg = <1>;
+            peer-hub = <&hub_3_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+
+        /* 3.1 hub on port 4 */
+        hub_3_0: hub@2 {
+            compatible = "usb5e3,620";
+            reg = <2>;
+            peer-hub = <&hub_2_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };
diff --git a/dts/upstream/Bindings/usb/gpio-sbu-mux.yaml b/dts/upstream/Bindings/usb/gpio-sbu-mux.yaml
index 88e1607cf05..8a5f837eff9 100644
--- a/dts/upstream/Bindings/usb/gpio-sbu-mux.yaml
+++ b/dts/upstream/Bindings/usb/gpio-sbu-mux.yaml
@@ -22,6 +22,7 @@ properties:
           - nxp,cbdtu02043
           - onnn,fsusb43l10x
           - pericom,pi3usb102
+          - ti,tmuxhs4212
       - const: gpio-sbu-mux
 
   enable-gpios:
@@ -44,13 +45,18 @@ properties:
 
 required:
   - compatible
-  - enable-gpios
   - select-gpios
   - orientation-switch
   - port
 
 allOf:
   - $ref: usb-switch.yaml#
+  - if:
+      required:
+        - mode-switch
+    then:
+      required:
+        - enable-gpios
 
 additionalProperties: false
 
diff --git a/dts/upstream/Bindings/usb/microchip,mpfs-musb.yaml b/dts/upstream/Bindings/usb/microchip,mpfs-musb.yaml
index c5e9ce2e7bc..27b909de499 100644
--- a/dts/upstream/Bindings/usb/microchip,mpfs-musb.yaml
+++ b/dts/upstream/Bindings/usb/microchip,mpfs-musb.yaml
@@ -34,6 +34,13 @@ properties:
   clocks:
     maxItems: 1
 
+  microchip,ext-vbus-drv:
+    description:
+      Some ULPI USB PHYs do not support an internal VBUS supply and driving
+      the CPEN pin requires the configuration of the UPLI_USE__EXTVBUS
+      bit in ULPI_BUSCONTROL.
+    $ref: /schemas/types.yaml#/definitions/flag
+
 required:
   - compatible
   - reg
diff --git a/dts/upstream/Bindings/usb/microchip,usb2514.yaml b/dts/upstream/Bindings/usb/microchip,usb2514.yaml
index 783c27591e5..b14e6f37b29 100644
--- a/dts/upstream/Bindings/usb/microchip,usb2514.yaml
+++ b/dts/upstream/Bindings/usb/microchip,usb2514.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
 allOf:
-  - $ref: usb-hcd.yaml#
+  - $ref: usb-device.yaml#
 
 properties:
   compatible:
@@ -18,6 +18,7 @@ properties:
       - usb424,2412
       - usb424,2417
       - usb424,2514
+      - usb424,2517
 
   reg: true
 
@@ -35,6 +36,13 @@ required:
   - compatible
   - reg
 
+patternProperties:
+  "^.*@[0-9a-f]{1,2}$":
+    description: The hard wired USB devices
+    type: object
+    $ref: /schemas/usb/usb-device.yaml
+    additionalProperties: true
+
 unevaluatedProperties: false
 
 examples:
diff --git a/dts/upstream/Bindings/usb/qcom,dwc3.yaml b/dts/upstream/Bindings/usb/qcom,dwc3.yaml
index cf633d488c3..efde47a5b14 100644
--- a/dts/upstream/Bindings/usb/qcom,dwc3.yaml
+++ b/dts/upstream/Bindings/usb/qcom,dwc3.yaml
@@ -30,6 +30,8 @@ properties:
           - qcom,sa8775p-dwc3
           - qcom,sc7180-dwc3
           - qcom,sc7280-dwc3
+          - qcom,sc8180x-dwc3
+          - qcom,sc8180x-dwc3-mp
           - qcom,sc8280xp-dwc3
           - qcom,sc8280xp-dwc3-mp
           - qcom,sdm660-dwc3
@@ -334,6 +336,8 @@ allOf:
           contains:
             enum:
               - qcom,qcm2290-dwc3
+              - qcom,sc8180x-dwc3
+              - qcom,sc8180x-dwc3-mp
               - qcom,sm6115-dwc3
               - qcom,sm6125-dwc3
               - qcom,sm8150-dwc3
@@ -448,6 +452,7 @@ allOf:
               - qcom,sa8775p-dwc3
               - qcom,sc7180-dwc3
               - qcom,sc7280-dwc3
+              - qcom,sc8180x-dwc3
               - qcom,sc8280xp-dwc3
               - qcom,sdm670-dwc3
               - qcom,sdm845-dwc3
@@ -480,6 +485,30 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sc8180x-dwc3-mp
+    then:
+      properties:
+        interrupts:
+          minItems: 10
+          maxItems: 10
+        interrupt-names:
+          items:
+            - const: pwr_event_1
+            - const: pwr_event_2
+            - const: hs_phy_1
+            - const: hs_phy_2
+            - const: dp_hs_phy_1
+            - const: dm_hs_phy_1
+            - const: dp_hs_phy_2
+            - const: dm_hs_phy_2
+            - const: ss_phy_1
+            - const: ss_phy_2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sc8280xp-dwc3-mp
     then:
       properties:
diff --git a/dts/upstream/Bindings/vendor-prefixes.yaml b/dts/upstream/Bindings/vendor-prefixes.yaml
index fbf47f0bacf..a70ce43b3dc 100644
--- a/dts/upstream/Bindings/vendor-prefixes.yaml
+++ b/dts/upstream/Bindings/vendor-prefixes.yaml
@@ -246,6 +246,8 @@ patternProperties:
     description: CALAO Systems SAS
   "^calxeda,.*":
     description: Calxeda
+  "^cameo,.*":
+    description: Cameo Communications, Inc
   "^canaan,.*":
     description: Canaan, Inc.
   "^caninos,.*":
@@ -338,6 +340,8 @@ patternProperties:
     description: Czech Technical University in Prague
   "^cubietech,.*":
     description: Cubietech, Ltd.
+  "^cudy,.*":
+    description: Shenzhen Cudy Technology Co., Ltd.
   "^cui,.*":
     description: CUI Devices
   "^cypress,.*":
@@ -394,6 +398,8 @@ patternProperties:
     description: DPTechnics
   "^dragino,.*":
     description: Dragino Technology Co., Limited
+  "^dream,.*":
+    description: Dream Property GmbH
   "^ds,.*":
     description: DaSheng, Inc.
   "^dserve,.*":
@@ -820,6 +826,8 @@ patternProperties:
     description: Lichee Pi
   "^linaro,.*":
     description: Linaro Limited
+  "^lincolntech,.*":
+    description: Lincoln Technology Solutions
   "^lineartechnology,.*":
     description: Linear Technology
   "^linksprite,.*":
@@ -924,6 +932,8 @@ patternProperties:
     description: Microsoft Corporation
   "^microsys,.*":
     description: MicroSys Electronics GmbH
+  "^microtips,.*":
+    description: Microtips Technology USA
   "^mikroe,.*":
     description: MikroElektronika d.o.o.
   "^mikrotik,.*":
@@ -995,6 +1005,8 @@ patternProperties:
     description: MYIR Tech Limited
   "^national,.*":
     description: National Semiconductor
+  "^neardi,.*":
+    description: Shanghai Neardi Technology Co., Ltd.
   "^nec,.*":
     description: NEC LCD Technologies, Ltd.
   "^neonode,.*":
@@ -1082,6 +1094,8 @@ patternProperties:
     description: OpenPandora GmbH
   "^openrisc,.*":
     description: OpenRISC.io
+  "^openwrt,.*":
+    description: OpenWrt
   "^option,.*":
     description: Option NV
   "^oranth,.*":
@@ -1160,6 +1174,8 @@ patternProperties:
     description: PowerVR (deprecated, use img)
   "^powkiddy,.*":
     description: Powkiddy
+  "^primeview,.*":
+    description: Prime View International (PVI)
   "^primux,.*":
     description: Primux Trading, S.L.
   "^probox2,.*":
@@ -1254,6 +1270,10 @@ patternProperties:
     description: Smart Battery System
   "^schindler,.*":
     description: Schindler
+  "^schneider,.*":
+    description: Schneider Electric
+  "^sciosense,.*":
+    description: ScioSense B.V.
   "^seagate,.*":
     description: Seagate Technology PLC
   "^seeed,.*":
diff --git a/dts/upstream/Bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/dts/upstream/Bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
index 69845ec32e8..d0eff1ea52b 100644
--- a/dts/upstream/Bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
+++ b/dts/upstream/Bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
@@ -21,6 +21,7 @@ properties:
           - amlogic,t7-wdt
       - items:
           - enum:
+              - amlogic,a4-wdt
               - amlogic,c3-wdt
               - amlogic,s4-wdt
           - const: amlogic,t7-wdt
diff --git a/dts/upstream/Bindings/watchdog/dlg,da9062-watchdog.yaml b/dts/upstream/Bindings/watchdog/dlg,da9062-watchdog.yaml
index c8f69812059..64619ba08d4 100644
--- a/dts/upstream/Bindings/watchdog/dlg,da9062-watchdog.yaml
+++ b/dts/upstream/Bindings/watchdog/dlg,da9062-watchdog.yaml
@@ -28,7 +28,7 @@ properties:
       Add this property to disable the watchdog during suspend.
       Only use this option if you can't use the watchdog automatic suspend
       function during a suspend (see register CONTROL_B).
-  
+
   dlg,wdt-sd:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
diff --git a/dts/upstream/Bindings/watchdog/fsl-imx-wdt.yaml b/dts/upstream/Bindings/watchdog/fsl-imx-wdt.yaml
index 181f0cc5b5b..36b836d0620 100644
--- a/dts/upstream/Bindings/watchdog/fsl-imx-wdt.yaml
+++ b/dts/upstream/Bindings/watchdog/fsl-imx-wdt.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX Watchdog Timer (WDT) Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 properties:
   compatible:
diff --git a/dts/upstream/Bindings/watchdog/fsl-imx7ulp-wdt.yaml b/dts/upstream/Bindings/watchdog/fsl-imx7ulp-wdt.yaml
index 9c50766bf69..a09686b3030 100644
--- a/dts/upstream/Bindings/watchdog/fsl-imx7ulp-wdt.yaml
+++ b/dts/upstream/Bindings/watchdog/fsl-imx7ulp-wdt.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX7ULP Watchdog Timer (WDT) Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 allOf:
   - $ref: watchdog.yaml#
diff --git a/dts/upstream/Bindings/watchdog/img,pdc-wdt.yaml b/dts/upstream/Bindings/watchdog/img,pdc-wdt.yaml
new file mode 100644
index 00000000000..a88a2735450
--- /dev/null
+++ b/dts/upstream/Bindings/watchdog/img,pdc-wdt.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/img,pdc-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT)
+
+maintainers:
+  - Shresth Prasad <shresthprasad7@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - img,pdc-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: watchdog counter clock
+      - description: register interface clock
+
+  clock-names:
+    items:
+      - const: wdt
+      - const: sys
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    watchdog@18102100 {
+      compatible = "img,pdc-wdt";
+      reg = <0x18102100 0x100>;
+      clocks = <&pdc_wdt_clk>, <&sys_clk>;
+      clock-names = "wdt", "sys";
+      interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/dts/upstream/Bindings/watchdog/imgpdc-wdt.txt b/dts/upstream/Bindings/watchdog/imgpdc-wdt.txt
deleted file mode 100644
index b2fa11fd43d..00000000000
--- a/dts/upstream/Bindings/watchdog/imgpdc-wdt.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-*ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT)
-
-Required properties:
-- compatible : Should be "img,pdc-wdt"
-- reg : Should contain WDT registers location and length
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Should contain "wdt" and "sys"; the watchdog counter
-               clock and register interface clock respectively.
-- interrupts : Should contain WDT interrupt
-
-Examples:
-
-watchdog@18102100 {
-	compatible = "img,pdc-wdt";
-	reg = <0x18102100 0x100>;
-	clocks = <&pdc_wdt_clk>, <&sys_clk>;
-	clock-names = "wdt", "sys";
-	interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/dts/upstream/Bindings/watchdog/renesas,wdt.yaml b/dts/upstream/Bindings/watchdog/renesas,wdt.yaml
index ffb17add491..eba454d1680 100644
--- a/dts/upstream/Bindings/watchdog/renesas,wdt.yaml
+++ b/dts/upstream/Bindings/watchdog/renesas,wdt.yaml
@@ -29,6 +29,7 @@ properties:
               - renesas,r9a07g043-wdt    # RZ/G2UL and RZ/Five
               - renesas,r9a07g044-wdt    # RZ/G2{L,LC}
               - renesas,r9a07g054-wdt    # RZ/V2L
+              - renesas,r9a08g045-wdt    # RZ/G3S
           - const: renesas,rzg2l-wdt
 
       - items:
diff --git a/dts/upstream/include/dt-bindings/arm/qcom,ids.h b/dts/upstream/include/dt-bindings/arm/qcom,ids.h
index d040033dc8e..d6c9e947212 100644
--- a/dts/upstream/include/dt-bindings/arm/qcom,ids.h
+++ b/dts/upstream/include/dt-bindings/arm/qcom,ids.h
@@ -175,6 +175,7 @@
 #define QCOM_ID_SDA630			327
 #define QCOM_ID_MSM8905			331
 #define QCOM_ID_SDX202			333
+#define QCOM_ID_SDM670			336
 #define QCOM_ID_SDM450			338
 #define QCOM_ID_SM8150			339
 #define QCOM_ID_SDA845			341
@@ -272,6 +273,7 @@
 #define QCOM_ID_QCS8550			603
 #define QCOM_ID_QCM8550			604
 #define QCOM_ID_IPQ5300			624
+#define QCOM_ID_IPQ5321			650
 
 /*
  * The board type and revision information, used by Qualcomm bootloaders and
diff --git a/dts/upstream/include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h b/dts/upstream/include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h
index 06f198ee762..2ce1a06dc73 100644
--- a/dts/upstream/include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h
+++ b/dts/upstream/include/dt-bindings/clock/amlogic,a1-peripherals-clkc.h
@@ -164,5 +164,6 @@
 #define CLKID_DMC_SEL		151
 #define CLKID_DMC_DIV		152
 #define CLKID_DMC_SEL2		153
+#define CLKID_SYS_PLL_DIV16	154
 
 #endif /* __A1_PERIPHERALS_CLKC_H */
diff --git a/dts/upstream/include/dt-bindings/clock/amlogic,a1-pll-clkc.h b/dts/upstream/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
index 2b660c0f2c9..0dfc5e78a2d 100644
--- a/dts/upstream/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
+++ b/dts/upstream/include/dt-bindings/clock/amlogic,a1-pll-clkc.h
@@ -21,5 +21,6 @@
 #define CLKID_FCLK_DIV5		8
 #define CLKID_FCLK_DIV7		9
 #define CLKID_HIFI_PLL		10
+#define CLKID_SYS_PLL		11
 
 #endif /* __A1_PLL_CLKC_H */
diff --git a/dts/upstream/include/dt-bindings/clock/amlogic,c3-peripherals-clkc.h b/dts/upstream/include/dt-bindings/clock/amlogic,c3-peripherals-clkc.h
new file mode 100644
index 00000000000..d115c741c25
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/amlogic,c3-peripherals-clkc.h
@@ -0,0 +1,212 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
+ * Author: Chuan Liu <chuan.liu@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_C3_PERIPHERALS_CLKC_H
+#define _DT_BINDINGS_CLOCK_AMLOGIC_C3_PERIPHERALS_CLKC_H
+
+#define CLKID_RTC_XTAL_CLKIN			0
+#define CLKID_RTC_32K_DIV			1
+#define CLKID_RTC_32K_MUX			2
+#define CLKID_RTC_32K				3
+#define CLKID_RTC_CLK				4
+#define CLKID_SYS_RESET_CTRL			5
+#define CLKID_SYS_PWR_CTRL			6
+#define CLKID_SYS_PAD_CTRL			7
+#define CLKID_SYS_CTRL				8
+#define CLKID_SYS_TS_PLL			9
+#define CLKID_SYS_DEV_ARB			10
+#define CLKID_SYS_MMC_PCLK			11
+#define CLKID_SYS_CPU_CTRL			12
+#define CLKID_SYS_JTAG_CTRL			13
+#define CLKID_SYS_IR_CTRL			14
+#define CLKID_SYS_IRQ_CTRL			15
+#define CLKID_SYS_MSR_CLK			16
+#define CLKID_SYS_ROM				17
+#define CLKID_SYS_UART_F			18
+#define CLKID_SYS_CPU_ARB			19
+#define CLKID_SYS_RSA				20
+#define CLKID_SYS_SAR_ADC			21
+#define CLKID_SYS_STARTUP			22
+#define CLKID_SYS_SECURE			23
+#define CLKID_SYS_SPIFC				24
+#define CLKID_SYS_NNA				25
+#define CLKID_SYS_ETH_MAC			26
+#define CLKID_SYS_GIC				27
+#define CLKID_SYS_RAMA				28
+#define CLKID_SYS_BIG_NIC			29
+#define CLKID_SYS_RAMB				30
+#define CLKID_SYS_AUDIO_PCLK			31
+#define CLKID_SYS_PWM_KL			32
+#define CLKID_SYS_PWM_IJ			33
+#define CLKID_SYS_USB				34
+#define CLKID_SYS_SD_EMMC_A			35
+#define CLKID_SYS_SD_EMMC_C			36
+#define CLKID_SYS_PWM_AB			37
+#define CLKID_SYS_PWM_CD			38
+#define CLKID_SYS_PWM_EF			39
+#define CLKID_SYS_PWM_GH			40
+#define CLKID_SYS_SPICC_1			41
+#define CLKID_SYS_SPICC_0			42
+#define CLKID_SYS_UART_A			43
+#define CLKID_SYS_UART_B			44
+#define CLKID_SYS_UART_C			45
+#define CLKID_SYS_UART_D			46
+#define CLKID_SYS_UART_E			47
+#define CLKID_SYS_I2C_M_A			48
+#define CLKID_SYS_I2C_M_B			49
+#define CLKID_SYS_I2C_M_C			50
+#define CLKID_SYS_I2C_M_D			51
+#define CLKID_SYS_I2S_S_A			52
+#define CLKID_SYS_RTC				53
+#define CLKID_SYS_GE2D				54
+#define CLKID_SYS_ISP				55
+#define CLKID_SYS_GPV_ISP_NIC			56
+#define CLKID_SYS_GPV_CVE_NIC			57
+#define CLKID_SYS_MIPI_DSI_HOST			58
+#define CLKID_SYS_MIPI_DSI_PHY			59
+#define CLKID_SYS_ETH_PHY			60
+#define CLKID_SYS_ACODEC			61
+#define CLKID_SYS_DWAP				62
+#define CLKID_SYS_DOS				63
+#define CLKID_SYS_CVE				64
+#define CLKID_SYS_VOUT				65
+#define CLKID_SYS_VC9000E			66
+#define CLKID_SYS_PWM_MN			67
+#define CLKID_SYS_SD_EMMC_B			68
+#define CLKID_AXI_SYS_NIC			69
+#define CLKID_AXI_ISP_NIC			70
+#define CLKID_AXI_CVE_NIC			71
+#define CLKID_AXI_RAMB				72
+#define CLKID_AXI_RAMA				73
+#define CLKID_AXI_CPU_DMC			74
+#define CLKID_AXI_NIC				75
+#define CLKID_AXI_DMA				76
+#define CLKID_AXI_MUX_NIC			77
+#define CLKID_AXI_CVE				78
+#define CLKID_AXI_DEV1_DMC			79
+#define CLKID_AXI_DEV0_DMC			80
+#define CLKID_AXI_DSP_DMC			81
+#define CLKID_12_24M_IN				82
+#define CLKID_12M_24M				83
+#define CLKID_FCLK_25M_DIV			84
+#define CLKID_FCLK_25M				85
+#define CLKID_GEN_SEL				86
+#define CLKID_GEN_DIV				87
+#define CLKID_GEN				88
+#define CLKID_SARADC_SEL			89
+#define CLKID_SARADC_DIV			90
+#define CLKID_SARADC				91
+#define CLKID_PWM_A_SEL				92
+#define CLKID_PWM_A_DIV				93
+#define CLKID_PWM_A				94
+#define CLKID_PWM_B_SEL				95
+#define CLKID_PWM_B_DIV				96
+#define CLKID_PWM_B				97
+#define CLKID_PWM_C_SEL				98
+#define CLKID_PWM_C_DIV				99
+#define CLKID_PWM_C				100
+#define CLKID_PWM_D_SEL				101
+#define CLKID_PWM_D_DIV				102
+#define CLKID_PWM_D				103
+#define CLKID_PWM_E_SEL				104
+#define CLKID_PWM_E_DIV				105
+#define CLKID_PWM_E				106
+#define CLKID_PWM_F_SEL				107
+#define CLKID_PWM_F_DIV				108
+#define CLKID_PWM_F				109
+#define CLKID_PWM_G_SEL				110
+#define CLKID_PWM_G_DIV				111
+#define CLKID_PWM_G				112
+#define CLKID_PWM_H_SEL				113
+#define CLKID_PWM_H_DIV				114
+#define CLKID_PWM_H				115
+#define CLKID_PWM_I_SEL				116
+#define CLKID_PWM_I_DIV				117
+#define CLKID_PWM_I				118
+#define CLKID_PWM_J_SEL				119
+#define CLKID_PWM_J_DIV				120
+#define CLKID_PWM_J				121
+#define CLKID_PWM_K_SEL				122
+#define CLKID_PWM_K_DIV				123
+#define CLKID_PWM_K				124
+#define CLKID_PWM_L_SEL				125
+#define CLKID_PWM_L_DIV				126
+#define CLKID_PWM_L				127
+#define CLKID_PWM_M_SEL				128
+#define CLKID_PWM_M_DIV				129
+#define CLKID_PWM_M				130
+#define CLKID_PWM_N_SEL				131
+#define CLKID_PWM_N_DIV				132
+#define CLKID_PWM_N				133
+#define CLKID_SPICC_A_SEL			134
+#define CLKID_SPICC_A_DIV			135
+#define CLKID_SPICC_A				136
+#define CLKID_SPICC_B_SEL			137
+#define CLKID_SPICC_B_DIV			138
+#define CLKID_SPICC_B				139
+#define CLKID_SPIFC_SEL				140
+#define CLKID_SPIFC_DIV				141
+#define CLKID_SPIFC				142
+#define CLKID_SD_EMMC_A_SEL			143
+#define CLKID_SD_EMMC_A_DIV			144
+#define CLKID_SD_EMMC_A				145
+#define CLKID_SD_EMMC_B_SEL			146
+#define CLKID_SD_EMMC_B_DIV			147
+#define CLKID_SD_EMMC_B				148
+#define CLKID_SD_EMMC_C_SEL			149
+#define CLKID_SD_EMMC_C_DIV			150
+#define CLKID_SD_EMMC_C				151
+#define CLKID_TS_DIV				152
+#define CLKID_TS				153
+#define CLKID_ETH_125M_DIV			154
+#define CLKID_ETH_125M				155
+#define CLKID_ETH_RMII_DIV			156
+#define CLKID_ETH_RMII				157
+#define CLKID_MIPI_DSI_MEAS_SEL			158
+#define CLKID_MIPI_DSI_MEAS_DIV			159
+#define CLKID_MIPI_DSI_MEAS			160
+#define CLKID_DSI_PHY_SEL			161
+#define CLKID_DSI_PHY_DIV			162
+#define CLKID_DSI_PHY				163
+#define CLKID_VOUT_MCLK_SEL			164
+#define CLKID_VOUT_MCLK_DIV			165
+#define CLKID_VOUT_MCLK				166
+#define CLKID_VOUT_ENC_SEL			167
+#define CLKID_VOUT_ENC_DIV			168
+#define CLKID_VOUT_ENC				169
+#define CLKID_HCODEC_0_SEL			170
+#define CLKID_HCODEC_0_DIV			171
+#define CLKID_HCODEC_0				172
+#define CLKID_HCODEC_1_SEL			173
+#define CLKID_HCODEC_1_DIV			174
+#define CLKID_HCODEC_1				175
+#define CLKID_HCODEC				176
+#define CLKID_VC9000E_ACLK_SEL			177
+#define CLKID_VC9000E_ACLK_DIV			178
+#define CLKID_VC9000E_ACLK			179
+#define CLKID_VC9000E_CORE_SEL			180
+#define CLKID_VC9000E_CORE_DIV			181
+#define CLKID_VC9000E_CORE			182
+#define CLKID_CSI_PHY0_SEL			183
+#define CLKID_CSI_PHY0_DIV			184
+#define CLKID_CSI_PHY0				185
+#define CLKID_DEWARPA_SEL			186
+#define CLKID_DEWARPA_DIV			187
+#define CLKID_DEWARPA				188
+#define CLKID_ISP0_SEL				189
+#define CLKID_ISP0_DIV				190
+#define CLKID_ISP0				191
+#define CLKID_NNA_CORE_SEL			192
+#define CLKID_NNA_CORE_DIV			193
+#define CLKID_NNA_CORE				194
+#define CLKID_GE2D_SEL				195
+#define CLKID_GE2D_DIV				196
+#define CLKID_GE2D				197
+#define CLKID_VAPB_SEL				198
+#define CLKID_VAPB_DIV				199
+#define CLKID_VAPB				200
+
+#endif  /* _DT_BINDINGS_CLOCK_AMLOGIC_C3_PERIPHERALS_CLKC_H */
diff --git a/dts/upstream/include/dt-bindings/clock/amlogic,c3-pll-clkc.h b/dts/upstream/include/dt-bindings/clock/amlogic,c3-pll-clkc.h
new file mode 100644
index 00000000000..fcdc558715e
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/amlogic,c3-pll-clkc.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
+ * Author: Chuan Liu <chuan.liu@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_C3_PLL_CLKC_H
+#define _DT_BINDINGS_CLOCK_AMLOGIC_C3_PLL_CLKC_H
+
+#define CLKID_FCLK_50M_EN			0
+#define CLKID_FCLK_50M				1
+#define CLKID_FCLK_DIV2_DIV			2
+#define CLKID_FCLK_DIV2				3
+#define CLKID_FCLK_DIV2P5_DIV			4
+#define CLKID_FCLK_DIV2P5			5
+#define CLKID_FCLK_DIV3_DIV			6
+#define CLKID_FCLK_DIV3				7
+#define CLKID_FCLK_DIV4_DIV			8
+#define CLKID_FCLK_DIV4				9
+#define CLKID_FCLK_DIV5_DIV			10
+#define CLKID_FCLK_DIV5				11
+#define CLKID_FCLK_DIV7_DIV			12
+#define CLKID_FCLK_DIV7				13
+#define CLKID_GP0_PLL_DCO			14
+#define CLKID_GP0_PLL				15
+#define CLKID_HIFI_PLL_DCO			16
+#define CLKID_HIFI_PLL				17
+#define CLKID_MCLK_PLL_DCO			18
+#define CLKID_MCLK_PLL_OD			19
+#define CLKID_MCLK_PLL				20
+#define CLKID_MCLK0_SEL				21
+#define CLKID_MCLK0_SEL_EN			22
+#define CLKID_MCLK0_DIV				23
+#define CLKID_MCLK0				24
+#define CLKID_MCLK1_SEL				25
+#define CLKID_MCLK1_SEL_EN			26
+#define CLKID_MCLK1_DIV				27
+#define CLKID_MCLK1				28
+
+#endif  /* _DT_BINDINGS_CLOCK_AMLOGIC_C3_PLL_CLKC_H */
diff --git a/dts/upstream/include/dt-bindings/clock/amlogic,c3-scmi-clkc.h b/dts/upstream/include/dt-bindings/clock/amlogic,c3-scmi-clkc.h
new file mode 100644
index 00000000000..663c9b34927
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/amlogic,c3-scmi-clkc.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
+ * Author: Chuan Liu <chuan.liu@amlogic.com>
+ */
+
+#ifndef __AMLOGIC_C3_SCMI_CLKC_H
+#define __AMLOGIC_C3_SCMI_CLKC_H
+
+#define CLKID_DDR_PLL_OSC			0
+#define CLKID_DDR_PHY				1
+#define CLKID_TOP_PLL_OSC			2
+#define CLKID_USB_PLL_OSC			3
+#define CLKID_MIPIISP_VOUT			4
+#define CLKID_MCLK_PLL_OSC			5
+#define CLKID_USB_CTRL				6
+#define CLKID_ETH_PLL_OSC			7
+#define CLKID_OSC				8
+#define CLKID_SYS_CLK				9
+#define CLKID_AXI_CLK				10
+#define CLKID_CPU_CLK				11
+#define CLKID_FIXED_PLL_OSC			12
+#define CLKID_GP1_PLL_OSC			13
+#define CLKID_SYS_PLL_DIV16			14
+#define CLKID_CPU_CLK_DIV16			15
+
+#endif /* __AMLOGIC_C3_SCMI_CLKC_H */
diff --git a/dts/upstream/include/dt-bindings/clock/qcom,ipq9574-gcc.h b/dts/upstream/include/dt-bindings/clock/qcom,ipq9574-gcc.h
index 08fd3a37aca..52123c5a09f 100644
--- a/dts/upstream/include/dt-bindings/clock/qcom,ipq9574-gcc.h
+++ b/dts/upstream/include/dt-bindings/clock/qcom,ipq9574-gcc.h
@@ -216,4 +216,8 @@
 #define GCC_CRYPTO_AHB_CLK				207
 #define GCC_USB0_PIPE_CLK				208
 #define GCC_USB0_SLEEP_CLK				209
+#define GCC_PCIE0_PIPE_CLK				210
+#define GCC_PCIE1_PIPE_CLK				211
+#define GCC_PCIE2_PIPE_CLK				212
+#define GCC_PCIE3_PIPE_CLK				213
 #endif
diff --git a/dts/upstream/include/dt-bindings/clock/qcom,qca8k-nsscc.h b/dts/upstream/include/dt-bindings/clock/qcom,qca8k-nsscc.h
new file mode 100644
index 00000000000..0ac3e4c69a1
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/qcom,qca8k-nsscc.h
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_QCA8K_NSS_CC_H
+#define _DT_BINDINGS_CLK_QCOM_QCA8K_NSS_CC_H
+
+#define NSS_CC_SWITCH_CORE_CLK_SRC				0
+#define NSS_CC_SWITCH_CORE_CLK					1
+#define NSS_CC_APB_BRIDGE_CLK					2
+#define NSS_CC_MAC0_TX_CLK_SRC					3
+#define NSS_CC_MAC0_TX_DIV_CLK_SRC				4
+#define NSS_CC_MAC0_TX_CLK					5
+#define NSS_CC_MAC0_TX_SRDS1_CLK				6
+#define NSS_CC_MAC0_RX_CLK_SRC					7
+#define NSS_CC_MAC0_RX_DIV_CLK_SRC				8
+#define NSS_CC_MAC0_RX_CLK					9
+#define NSS_CC_MAC0_RX_SRDS1_CLK				10
+#define NSS_CC_MAC1_TX_CLK_SRC					11
+#define NSS_CC_MAC1_TX_DIV_CLK_SRC				12
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_RX_DIV_CLK_SRC		13
+#define NSS_CC_MAC1_SRDS1_CH0_RX_CLK				14
+#define NSS_CC_MAC1_TX_CLK					15
+#define NSS_CC_MAC1_GEPHY0_TX_CLK				16
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_RX_CLK			17
+#define NSS_CC_MAC1_RX_CLK_SRC					18
+#define NSS_CC_MAC1_RX_DIV_CLK_SRC				19
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_TX_DIV_CLK_SRC		20
+#define NSS_CC_MAC1_SRDS1_CH0_TX_CLK				21
+#define NSS_CC_MAC1_RX_CLK					22
+#define NSS_CC_MAC1_GEPHY0_RX_CLK				23
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_TX_CLK			24
+#define NSS_CC_MAC2_TX_CLK_SRC					25
+#define NSS_CC_MAC2_TX_DIV_CLK_SRC				26
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_RX_DIV_CLK_SRC		27
+#define NSS_CC_MAC2_SRDS1_CH1_RX_CLK				28
+#define NSS_CC_MAC2_TX_CLK					29
+#define NSS_CC_MAC2_GEPHY1_TX_CLK				30
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_RX_CLK			31
+#define NSS_CC_MAC2_RX_CLK_SRC					32
+#define NSS_CC_MAC2_RX_DIV_CLK_SRC				33
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_TX_DIV_CLK_SRC		34
+#define NSS_CC_MAC2_SRDS1_CH1_TX_CLK				35
+#define NSS_CC_MAC2_RX_CLK					36
+#define NSS_CC_MAC2_GEPHY1_RX_CLK				37
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_TX_CLK			38
+#define NSS_CC_MAC3_TX_CLK_SRC					39
+#define NSS_CC_MAC3_TX_DIV_CLK_SRC				40
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_RX_DIV_CLK_SRC		41
+#define NSS_CC_MAC3_SRDS1_CH2_RX_CLK				42
+#define NSS_CC_MAC3_TX_CLK					43
+#define NSS_CC_MAC3_GEPHY2_TX_CLK				44
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_RX_CLK			45
+#define NSS_CC_MAC3_RX_CLK_SRC					46
+#define NSS_CC_MAC3_RX_DIV_CLK_SRC				47
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_TX_DIV_CLK_SRC		48
+#define NSS_CC_MAC3_SRDS1_CH2_TX_CLK				49
+#define NSS_CC_MAC3_RX_CLK					50
+#define NSS_CC_MAC3_GEPHY2_RX_CLK				51
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_TX_CLK			52
+#define NSS_CC_MAC4_TX_CLK_SRC					53
+#define NSS_CC_MAC4_TX_DIV_CLK_SRC				54
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_RX_DIV_CLK_SRC		55
+#define NSS_CC_MAC4_SRDS1_CH3_RX_CLK				56
+#define NSS_CC_MAC4_TX_CLK					57
+#define NSS_CC_MAC4_GEPHY3_TX_CLK				58
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_RX_CLK			59
+#define NSS_CC_MAC4_RX_CLK_SRC					60
+#define NSS_CC_MAC4_RX_DIV_CLK_SRC				61
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_TX_DIV_CLK_SRC		62
+#define NSS_CC_MAC4_SRDS1_CH3_TX_CLK				63
+#define NSS_CC_MAC4_RX_CLK					64
+#define NSS_CC_MAC4_GEPHY3_RX_CLK				65
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_TX_CLK			66
+#define NSS_CC_MAC5_TX_CLK_SRC					67
+#define NSS_CC_MAC5_TX_DIV_CLK_SRC				68
+#define NSS_CC_MAC5_TX_SRDS0_CLK				69
+#define NSS_CC_MAC5_TX_CLK					70
+#define NSS_CC_MAC5_RX_CLK_SRC					71
+#define NSS_CC_MAC5_RX_DIV_CLK_SRC				72
+#define NSS_CC_MAC5_RX_SRDS0_CLK				73
+#define NSS_CC_MAC5_RX_CLK					74
+#define NSS_CC_MAC5_TX_SRDS0_CLK_SRC				75
+#define NSS_CC_MAC5_RX_SRDS0_CLK_SRC				76
+#define NSS_CC_AHB_CLK_SRC					77
+#define NSS_CC_AHB_CLK						78
+#define NSS_CC_SEC_CTRL_AHB_CLK					79
+#define NSS_CC_TLMM_CLK						80
+#define NSS_CC_TLMM_AHB_CLK					81
+#define NSS_CC_CNOC_AHB_CLK					82
+#define NSS_CC_MDIO_AHB_CLK					83
+#define NSS_CC_MDIO_MASTER_AHB_CLK				84
+#define NSS_CC_SYS_CLK_SRC					85
+#define NSS_CC_SRDS0_SYS_CLK					86
+#define NSS_CC_SRDS1_SYS_CLK					87
+#define NSS_CC_GEPHY0_SYS_CLK					88
+#define NSS_CC_GEPHY1_SYS_CLK					89
+#define NSS_CC_GEPHY2_SYS_CLK					90
+#define NSS_CC_GEPHY3_SYS_CLK					91
+#endif
diff --git a/dts/upstream/include/dt-bindings/clock/qcom,qcm2290-gpucc.h b/dts/upstream/include/dt-bindings/clock/qcom,qcm2290-gpucc.h
new file mode 100644
index 00000000000..7c76dd05278
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/qcom,qcm2290-gpucc.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_QCM2290_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_QCM2290_H
+
+/* GPU_CC clocks */
+#define GPU_CC_AHB_CLK			0
+#define GPU_CC_CRC_AHB_CLK		1
+#define GPU_CC_CX_GFX3D_CLK		2
+#define GPU_CC_CX_GMU_CLK		3
+#define GPU_CC_CX_SNOC_DVM_CLK		4
+#define GPU_CC_CXO_AON_CLK		5
+#define GPU_CC_CXO_CLK			6
+#define GPU_CC_GMU_CLK_SRC		7
+#define GPU_CC_GX_GFX3D_CLK		8
+#define GPU_CC_GX_GFX3D_CLK_SRC		9
+#define GPU_CC_PLL0			10
+#define GPU_CC_SLEEP_CLK		11
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK	12
+
+/* Resets */
+#define GPU_GX_BCR			0
+
+/* GDSCs */
+#define GPU_CX_GDSC			0
+#define GPU_GX_GDSC			1
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/clock/qcom,sm7150-camcc.h b/dts/upstream/include/dt-bindings/clock/qcom,sm7150-camcc.h
new file mode 100644
index 00000000000..ce73ef0fe95
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/qcom,sm7150-camcc.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAMCC_SM7150_H
+#define _DT_BINDINGS_CLK_QCOM_CAMCC_SM7150_H
+
+/* Hardware clocks */
+#define CAMCC_PLL0_OUT_EVEN					0
+#define CAMCC_PLL0_OUT_ODD					1
+#define CAMCC_PLL1_OUT_EVEN					2
+#define CAMCC_PLL2_OUT_EARLY					3
+#define CAMCC_PLL3_OUT_EVEN					4
+#define CAMCC_PLL4_OUT_EVEN					5
+
+/* CAMCC clock registers */
+#define CAMCC_PLL0						6
+#define CAMCC_PLL1						7
+#define CAMCC_PLL2						8
+#define CAMCC_PLL2_OUT_AUX					9
+#define CAMCC_PLL2_OUT_MAIN					10
+#define CAMCC_PLL3						11
+#define CAMCC_PLL4						12
+#define CAMCC_BPS_AHB_CLK					13
+#define CAMCC_BPS_AREG_CLK					14
+#define CAMCC_BPS_AXI_CLK					15
+#define CAMCC_BPS_CLK						16
+#define CAMCC_BPS_CLK_SRC					17
+#define CAMCC_CAMNOC_AXI_CLK					18
+#define CAMCC_CAMNOC_AXI_CLK_SRC				19
+#define CAMCC_CAMNOC_DCD_XO_CLK					20
+#define CAMCC_CCI_0_CLK						21
+#define CAMCC_CCI_0_CLK_SRC					22
+#define CAMCC_CCI_1_CLK						23
+#define CAMCC_CCI_1_CLK_SRC					24
+#define CAMCC_CORE_AHB_CLK					25
+#define CAMCC_CPAS_AHB_CLK					26
+#define CAMCC_CPHY_RX_CLK_SRC					27
+#define CAMCC_CSI0PHYTIMER_CLK					28
+#define CAMCC_CSI0PHYTIMER_CLK_SRC				29
+#define CAMCC_CSI1PHYTIMER_CLK					30
+#define CAMCC_CSI1PHYTIMER_CLK_SRC				31
+#define CAMCC_CSI2PHYTIMER_CLK					32
+#define CAMCC_CSI2PHYTIMER_CLK_SRC				33
+#define CAMCC_CSI3PHYTIMER_CLK					34
+#define CAMCC_CSI3PHYTIMER_CLK_SRC				35
+#define CAMCC_CSIPHY0_CLK					36
+#define CAMCC_CSIPHY1_CLK					37
+#define CAMCC_CSIPHY2_CLK					38
+#define CAMCC_CSIPHY3_CLK					39
+#define CAMCC_FAST_AHB_CLK_SRC					40
+#define CAMCC_FD_CORE_CLK					41
+#define CAMCC_FD_CORE_CLK_SRC					42
+#define CAMCC_FD_CORE_UAR_CLK					43
+#define CAMCC_ICP_AHB_CLK					44
+#define CAMCC_ICP_CLK						45
+#define CAMCC_ICP_CLK_SRC					46
+#define CAMCC_IFE_0_AXI_CLK					47
+#define CAMCC_IFE_0_CLK						48
+#define CAMCC_IFE_0_CLK_SRC					49
+#define CAMCC_IFE_0_CPHY_RX_CLK					50
+#define CAMCC_IFE_0_CSID_CLK					51
+#define CAMCC_IFE_0_CSID_CLK_SRC				52
+#define CAMCC_IFE_0_DSP_CLK					53
+#define CAMCC_IFE_1_AXI_CLK					54
+#define CAMCC_IFE_1_CLK						55
+#define CAMCC_IFE_1_CLK_SRC					56
+#define CAMCC_IFE_1_CPHY_RX_CLK					57
+#define CAMCC_IFE_1_CSID_CLK					58
+#define CAMCC_IFE_1_CSID_CLK_SRC				59
+#define CAMCC_IFE_1_DSP_CLK					60
+#define CAMCC_IFE_LITE_CLK					61
+#define CAMCC_IFE_LITE_CLK_SRC					62
+#define CAMCC_IFE_LITE_CPHY_RX_CLK				63
+#define CAMCC_IFE_LITE_CSID_CLK					64
+#define CAMCC_IFE_LITE_CSID_CLK_SRC				65
+#define CAMCC_IPE_0_AHB_CLK					66
+#define CAMCC_IPE_0_AREG_CLK					67
+#define CAMCC_IPE_0_AXI_CLK					68
+#define CAMCC_IPE_0_CLK						69
+#define CAMCC_IPE_0_CLK_SRC					70
+#define CAMCC_IPE_1_AHB_CLK					71
+#define CAMCC_IPE_1_AREG_CLK					72
+#define CAMCC_IPE_1_AXI_CLK					73
+#define CAMCC_IPE_1_CLK						74
+#define CAMCC_JPEG_CLK						75
+#define CAMCC_JPEG_CLK_SRC					76
+#define CAMCC_LRME_CLK						77
+#define CAMCC_LRME_CLK_SRC					78
+#define CAMCC_MCLK0_CLK						79
+#define CAMCC_MCLK0_CLK_SRC					80
+#define CAMCC_MCLK1_CLK						81
+#define CAMCC_MCLK1_CLK_SRC					82
+#define CAMCC_MCLK2_CLK						83
+#define CAMCC_MCLK2_CLK_SRC					84
+#define CAMCC_MCLK3_CLK						85
+#define CAMCC_MCLK3_CLK_SRC					86
+#define CAMCC_SLEEP_CLK						87
+#define CAMCC_SLEEP_CLK_SRC					88
+#define CAMCC_SLOW_AHB_CLK_SRC					89
+#define CAMCC_XO_CLK_SRC					90
+
+/* CAMCC GDSCRs */
+#define BPS_GDSC						0
+#define IFE_0_GDSC						1
+#define IFE_1_GDSC						2
+#define IPE_0_GDSC						3
+#define IPE_1_GDSC						4
+#define TITAN_TOP_GDSC						5
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/clock/qcom,sm7150-dispcc.h b/dts/upstream/include/dt-bindings/clock/qcom,sm7150-dispcc.h
new file mode 100644
index 00000000000..fc1fefe8fd7
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/qcom,sm7150-dispcc.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com>
+ * Copyright (c) 2024, David Wronek <david@mainlining.org>
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_DISPCC_SM7150_H
+#define _DT_BINDINGS_CLK_QCOM_DISPCC_SM7150_H
+
+/* DISPCC clock registers */
+#define DISPCC_PLL0				0
+#define DISPCC_MDSS_AHB_CLK			1
+#define DISPCC_MDSS_AHB_CLK_SRC			2
+#define DISPCC_MDSS_BYTE0_CLK			3
+#define DISPCC_MDSS_BYTE0_CLK_SRC		4
+#define DISPCC_MDSS_BYTE0_DIV_CLK_SRC		5
+#define DISPCC_MDSS_BYTE0_INTF_CLK		6
+#define DISPCC_MDSS_BYTE1_CLK			7
+#define DISPCC_MDSS_BYTE1_CLK_SRC		8
+#define DISPCC_MDSS_BYTE1_DIV_CLK_SRC		9
+#define DISPCC_MDSS_BYTE1_INTF_CLK		10
+#define DISPCC_MDSS_DP_AUX_CLK			11
+#define DISPCC_MDSS_DP_AUX_CLK_SRC		12
+#define DISPCC_MDSS_DP_CRYPTO_CLK		13
+#define DISPCC_MDSS_DP_CRYPTO_CLK_SRC		14
+#define DISPCC_MDSS_DP_LINK_CLK			15
+#define DISPCC_MDSS_DP_LINK_CLK_SRC		16
+#define DISPCC_MDSS_DP_LINK_INTF_CLK		17
+#define DISPCC_MDSS_DP_PIXEL1_CLK		18
+#define DISPCC_MDSS_DP_PIXEL1_CLK_SRC		19
+#define DISPCC_MDSS_DP_PIXEL_CLK		20
+#define DISPCC_MDSS_DP_PIXEL_CLK_SRC		21
+#define DISPCC_MDSS_ESC0_CLK			22
+#define DISPCC_MDSS_ESC0_CLK_SRC		23
+#define DISPCC_MDSS_ESC1_CLK			24
+#define DISPCC_MDSS_ESC1_CLK_SRC		25
+#define DISPCC_MDSS_MDP_CLK			26
+#define DISPCC_MDSS_MDP_CLK_SRC			27
+#define DISPCC_MDSS_MDP_LUT_CLK			28
+#define DISPCC_MDSS_NON_GDSC_AHB_CLK		29
+#define DISPCC_MDSS_PCLK0_CLK			30
+#define DISPCC_MDSS_PCLK0_CLK_SRC		31
+#define DISPCC_MDSS_PCLK1_CLK			32
+#define DISPCC_MDSS_PCLK1_CLK_SRC		33
+#define DISPCC_MDSS_ROT_CLK			34
+#define DISPCC_MDSS_ROT_CLK_SRC			35
+#define DISPCC_MDSS_RSCC_AHB_CLK		36
+#define DISPCC_MDSS_RSCC_VSYNC_CLK		37
+#define DISPCC_MDSS_VSYNC_CLK			38
+#define DISPCC_MDSS_VSYNC_CLK_SRC		39
+#define DISPCC_XO_CLK_SRC			40
+#define DISPCC_SLEEP_CLK			41
+#define DISPCC_SLEEP_CLK_SRC			42
+
+/* DISPCC GDSCR */
+#define MDSS_GDSC				0
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/clock/qcom,sm7150-videocc.h b/dts/upstream/include/dt-bindings/clock/qcom,sm7150-videocc.h
new file mode 100644
index 00000000000..d86e0fbb159
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/qcom,sm7150-videocc.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEOCC_SM7150_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEOCC_SM7150_H
+
+#define VIDEOCC_PLL0			0
+#define VIDEOCC_IRIS_AHB_CLK		1
+#define VIDEOCC_IRIS_CLK_SRC		2
+#define VIDEOCC_MVS0_AXI_CLK		3
+#define VIDEOCC_MVS0_CORE_CLK		4
+#define VIDEOCC_MVS1_AXI_CLK		5
+#define VIDEOCC_MVS1_CORE_CLK		6
+#define VIDEOCC_MVSC_CORE_CLK		7
+#define VIDEOCC_MVSC_CTL_AXI_CLK	8
+#define VIDEOCC_VENUS_AHB_CLK		9
+#define VIDEOCC_XO_CLK			10
+#define VIDEOCC_XO_CLK_SRC		11
+
+/* VIDEOCC GDSCRs */
+#define VENUS_GDSC			0
+#define VCODEC0_GDSC			1
+#define VCODEC1_GDSC			2
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/clock/qcom,sm8650-camcc.h b/dts/upstream/include/dt-bindings/clock/qcom,sm8650-camcc.h
new file mode 100644
index 00000000000..df73bf35f4b
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/qcom,sm8650-camcc.h
@@ -0,0 +1,195 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SM8650_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SM8650_H
+
+/* CAM_CC clocks */
+#define CAM_CC_BPS_AHB_CLK					0
+#define CAM_CC_BPS_CLK						1
+#define CAM_CC_BPS_CLK_SRC					2
+#define CAM_CC_BPS_FAST_AHB_CLK					3
+#define CAM_CC_BPS_SHIFT_CLK					4
+#define CAM_CC_CAMNOC_AXI_NRT_CLK				5
+#define CAM_CC_CAMNOC_AXI_RT_CLK				6
+#define CAM_CC_CAMNOC_AXI_RT_CLK_SRC				7
+#define CAM_CC_CAMNOC_DCD_XO_CLK				8
+#define CAM_CC_CAMNOC_XO_CLK					9
+#define CAM_CC_CCI_0_CLK					10
+#define CAM_CC_CCI_0_CLK_SRC					11
+#define CAM_CC_CCI_1_CLK					12
+#define CAM_CC_CCI_1_CLK_SRC					13
+#define CAM_CC_CCI_2_CLK					14
+#define CAM_CC_CCI_2_CLK_SRC					15
+#define CAM_CC_CORE_AHB_CLK					16
+#define CAM_CC_CPAS_AHB_CLK					17
+#define CAM_CC_CPAS_BPS_CLK					18
+#define CAM_CC_CPAS_CRE_CLK					19
+#define CAM_CC_CPAS_FAST_AHB_CLK				20
+#define CAM_CC_CPAS_IFE_0_CLK					21
+#define CAM_CC_CPAS_IFE_1_CLK					22
+#define CAM_CC_CPAS_IFE_2_CLK					23
+#define CAM_CC_CPAS_IFE_LITE_CLK				24
+#define CAM_CC_CPAS_IPE_NPS_CLK					25
+#define CAM_CC_CPAS_SBI_CLK					26
+#define CAM_CC_CPAS_SFE_0_CLK					27
+#define CAM_CC_CPAS_SFE_1_CLK					28
+#define CAM_CC_CPAS_SFE_2_CLK					29
+#define CAM_CC_CPHY_RX_CLK_SRC					30
+#define CAM_CC_CRE_AHB_CLK					31
+#define CAM_CC_CRE_CLK						32
+#define CAM_CC_CRE_CLK_SRC					33
+#define CAM_CC_CSI0PHYTIMER_CLK					34
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC				35
+#define CAM_CC_CSI1PHYTIMER_CLK					36
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC				37
+#define CAM_CC_CSI2PHYTIMER_CLK					38
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC				39
+#define CAM_CC_CSI3PHYTIMER_CLK					40
+#define CAM_CC_CSI3PHYTIMER_CLK_SRC				41
+#define CAM_CC_CSI4PHYTIMER_CLK					42
+#define CAM_CC_CSI4PHYTIMER_CLK_SRC				43
+#define CAM_CC_CSI5PHYTIMER_CLK					44
+#define CAM_CC_CSI5PHYTIMER_CLK_SRC				45
+#define CAM_CC_CSI6PHYTIMER_CLK					46
+#define CAM_CC_CSI6PHYTIMER_CLK_SRC				47
+#define CAM_CC_CSI7PHYTIMER_CLK					48
+#define CAM_CC_CSI7PHYTIMER_CLK_SRC				49
+#define CAM_CC_CSID_CLK						50
+#define CAM_CC_CSID_CLK_SRC					51
+#define CAM_CC_CSID_CSIPHY_RX_CLK				52
+#define CAM_CC_CSIPHY0_CLK					53
+#define CAM_CC_CSIPHY1_CLK					54
+#define CAM_CC_CSIPHY2_CLK					55
+#define CAM_CC_CSIPHY3_CLK					56
+#define CAM_CC_CSIPHY4_CLK					57
+#define CAM_CC_CSIPHY5_CLK					58
+#define CAM_CC_CSIPHY6_CLK					59
+#define CAM_CC_CSIPHY7_CLK					60
+#define CAM_CC_DRV_AHB_CLK					61
+#define CAM_CC_DRV_XO_CLK					62
+#define CAM_CC_FAST_AHB_CLK_SRC					63
+#define CAM_CC_GDSC_CLK						64
+#define CAM_CC_ICP_AHB_CLK					65
+#define CAM_CC_ICP_CLK						66
+#define CAM_CC_ICP_CLK_SRC					67
+#define CAM_CC_IFE_0_CLK					68
+#define CAM_CC_IFE_0_CLK_SRC					69
+#define CAM_CC_IFE_0_FAST_AHB_CLK				70
+#define CAM_CC_IFE_0_SHIFT_CLK					71
+#define CAM_CC_IFE_1_CLK					72
+#define CAM_CC_IFE_1_CLK_SRC					73
+#define CAM_CC_IFE_1_FAST_AHB_CLK				74
+#define CAM_CC_IFE_1_SHIFT_CLK					75
+#define CAM_CC_IFE_2_CLK					76
+#define CAM_CC_IFE_2_CLK_SRC					77
+#define CAM_CC_IFE_2_FAST_AHB_CLK				78
+#define CAM_CC_IFE_2_SHIFT_CLK					79
+#define CAM_CC_IFE_LITE_AHB_CLK					80
+#define CAM_CC_IFE_LITE_CLK					81
+#define CAM_CC_IFE_LITE_CLK_SRC					82
+#define CAM_CC_IFE_LITE_CPHY_RX_CLK				83
+#define CAM_CC_IFE_LITE_CSID_CLK				84
+#define CAM_CC_IFE_LITE_CSID_CLK_SRC				85
+#define CAM_CC_IPE_NPS_AHB_CLK					86
+#define CAM_CC_IPE_NPS_CLK					87
+#define CAM_CC_IPE_NPS_CLK_SRC					88
+#define CAM_CC_IPE_NPS_FAST_AHB_CLK				89
+#define CAM_CC_IPE_PPS_CLK					90
+#define CAM_CC_IPE_PPS_FAST_AHB_CLK				91
+#define CAM_CC_IPE_SHIFT_CLK					92
+#define CAM_CC_JPEG_1_CLK					93
+#define CAM_CC_JPEG_CLK						94
+#define CAM_CC_JPEG_CLK_SRC					95
+#define CAM_CC_MCLK0_CLK					96
+#define CAM_CC_MCLK0_CLK_SRC					97
+#define CAM_CC_MCLK1_CLK					98
+#define CAM_CC_MCLK1_CLK_SRC					99
+#define CAM_CC_MCLK2_CLK					100
+#define CAM_CC_MCLK2_CLK_SRC					101
+#define CAM_CC_MCLK3_CLK					102
+#define CAM_CC_MCLK3_CLK_SRC					103
+#define CAM_CC_MCLK4_CLK					104
+#define CAM_CC_MCLK4_CLK_SRC					105
+#define CAM_CC_MCLK5_CLK					106
+#define CAM_CC_MCLK5_CLK_SRC					107
+#define CAM_CC_MCLK6_CLK					108
+#define CAM_CC_MCLK6_CLK_SRC					109
+#define CAM_CC_MCLK7_CLK					110
+#define CAM_CC_MCLK7_CLK_SRC					111
+#define CAM_CC_PLL0						112
+#define CAM_CC_PLL0_OUT_EVEN					113
+#define CAM_CC_PLL0_OUT_ODD					114
+#define CAM_CC_PLL1						115
+#define CAM_CC_PLL1_OUT_EVEN					116
+#define CAM_CC_PLL2						117
+#define CAM_CC_PLL3						118
+#define CAM_CC_PLL3_OUT_EVEN					119
+#define CAM_CC_PLL4						120
+#define CAM_CC_PLL4_OUT_EVEN					121
+#define CAM_CC_PLL5						122
+#define CAM_CC_PLL5_OUT_EVEN					123
+#define CAM_CC_PLL6						124
+#define CAM_CC_PLL6_OUT_EVEN					125
+#define CAM_CC_PLL7						126
+#define CAM_CC_PLL7_OUT_EVEN					127
+#define CAM_CC_PLL8						128
+#define CAM_CC_PLL8_OUT_EVEN					129
+#define CAM_CC_PLL9						130
+#define CAM_CC_PLL9_OUT_EVEN					131
+#define CAM_CC_PLL9_OUT_ODD					132
+#define CAM_CC_PLL10						133
+#define CAM_CC_PLL10_OUT_EVEN					134
+#define CAM_CC_QDSS_DEBUG_CLK					135
+#define CAM_CC_QDSS_DEBUG_CLK_SRC				136
+#define CAM_CC_QDSS_DEBUG_XO_CLK				137
+#define CAM_CC_SBI_CLK						138
+#define CAM_CC_SBI_FAST_AHB_CLK					139
+#define CAM_CC_SBI_SHIFT_CLK					140
+#define CAM_CC_SFE_0_CLK					141
+#define CAM_CC_SFE_0_CLK_SRC					142
+#define CAM_CC_SFE_0_FAST_AHB_CLK				143
+#define CAM_CC_SFE_0_SHIFT_CLK					144
+#define CAM_CC_SFE_1_CLK					145
+#define CAM_CC_SFE_1_CLK_SRC					146
+#define CAM_CC_SFE_1_FAST_AHB_CLK				147
+#define CAM_CC_SFE_1_SHIFT_CLK					148
+#define CAM_CC_SFE_2_CLK					149
+#define CAM_CC_SFE_2_CLK_SRC					150
+#define CAM_CC_SFE_2_FAST_AHB_CLK				151
+#define CAM_CC_SFE_2_SHIFT_CLK					152
+#define CAM_CC_SLEEP_CLK					153
+#define CAM_CC_SLEEP_CLK_SRC					154
+#define CAM_CC_SLOW_AHB_CLK_SRC					155
+#define CAM_CC_TITAN_TOP_SHIFT_CLK				156
+#define CAM_CC_XO_CLK_SRC					157
+
+/* CAM_CC power domains */
+#define CAM_CC_TITAN_TOP_GDSC					0
+#define CAM_CC_BPS_GDSC						1
+#define CAM_CC_IFE_0_GDSC					2
+#define CAM_CC_IFE_1_GDSC					3
+#define CAM_CC_IFE_2_GDSC					4
+#define CAM_CC_IPE_0_GDSC					5
+#define CAM_CC_SBI_GDSC						6
+#define CAM_CC_SFE_0_GDSC					7
+#define CAM_CC_SFE_1_GDSC					8
+#define CAM_CC_SFE_2_GDSC					9
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR						0
+#define CAM_CC_DRV_BCR						1
+#define CAM_CC_ICP_BCR						2
+#define CAM_CC_IFE_0_BCR					3
+#define CAM_CC_IFE_1_BCR					4
+#define CAM_CC_IFE_2_BCR					5
+#define CAM_CC_IPE_0_BCR					6
+#define CAM_CC_QDSS_DEBUG_BCR					7
+#define CAM_CC_SBI_BCR						8
+#define CAM_CC_SFE_0_BCR					9
+#define CAM_CC_SFE_1_BCR					10
+#define CAM_CC_SFE_2_BCR					11
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/clock/qcom,sm8650-videocc.h b/dts/upstream/include/dt-bindings/clock/qcom,sm8650-videocc.h
new file mode 100644
index 00000000000..4e3c2d87280
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/qcom,sm8650-videocc.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8650_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8650_H
+
+#include "qcom,sm8450-videocc.h"
+
+/* SM8650 introduces below new clocks and resets compared to SM8450 */
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_MVS0_SHIFT_CLK					12
+#define VIDEO_CC_MVS0C_SHIFT_CLK				13
+#define VIDEO_CC_MVS1_SHIFT_CLK					14
+#define VIDEO_CC_MVS1C_SHIFT_CLK				15
+#define VIDEO_CC_XO_CLK_SRC					16
+
+/* VIDEO_CC resets */
+#define VIDEO_CC_XO_CLK_ARES					7
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/clock/r8a7779-clock.h b/dts/upstream/include/dt-bindings/clock/r8a7779-clock.h
index 342a60b1193..e39acdc6499 100644
--- a/dts/upstream/include/dt-bindings/clock/r8a7779-clock.h
+++ b/dts/upstream/include/dt-bindings/clock/r8a7779-clock.h
@@ -57,5 +57,4 @@
 #define R8A7779_CLK_MMC1	30
 #define R8A7779_CLK_MMC0	31
 
-
 #endif /* __DT_BINDINGS_CLOCK_R8A7779_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/r8a7790-clock.h b/dts/upstream/include/dt-bindings/clock/r8a7790-clock.h
deleted file mode 100644
index c92ff1e6022..00000000000
--- a/dts/upstream/include/dt-bindings/clock/r8a7790-clock.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2013 Ideas On Board SPRL
- */
-
-#ifndef __DT_BINDINGS_CLOCK_R8A7790_H__
-#define __DT_BINDINGS_CLOCK_R8A7790_H__
-
-/* CPG */
-#define R8A7790_CLK_MAIN		0
-#define R8A7790_CLK_PLL0		1
-#define R8A7790_CLK_PLL1		2
-#define R8A7790_CLK_PLL3		3
-#define R8A7790_CLK_LB			4
-#define R8A7790_CLK_QSPI		5
-#define R8A7790_CLK_SDH			6
-#define R8A7790_CLK_SD0			7
-#define R8A7790_CLK_SD1			8
-#define R8A7790_CLK_Z			9
-#define R8A7790_CLK_RCAN		10
-#define R8A7790_CLK_ADSP		11
-
-/* MSTP0 */
-#define R8A7790_CLK_MSIOF0		0
-
-/* MSTP1 */
-#define R8A7790_CLK_VCP1		0
-#define R8A7790_CLK_VCP0		1
-#define R8A7790_CLK_VPC1		2
-#define R8A7790_CLK_VPC0		3
-#define R8A7790_CLK_JPU			6
-#define R8A7790_CLK_SSP1		9
-#define R8A7790_CLK_TMU1		11
-#define R8A7790_CLK_3DG			12
-#define R8A7790_CLK_2DDMAC		15
-#define R8A7790_CLK_FDP1_2		17
-#define R8A7790_CLK_FDP1_1		18
-#define R8A7790_CLK_FDP1_0		19
-#define R8A7790_CLK_TMU3		21
-#define R8A7790_CLK_TMU2		22
-#define R8A7790_CLK_CMT0		24
-#define R8A7790_CLK_TMU0		25
-#define R8A7790_CLK_VSP1_DU1		27
-#define R8A7790_CLK_VSP1_DU0		28
-#define R8A7790_CLK_VSP1_R		30
-#define R8A7790_CLK_VSP1_S		31
-
-/* MSTP2 */
-#define R8A7790_CLK_SCIFA2		2
-#define R8A7790_CLK_SCIFA1		3
-#define R8A7790_CLK_SCIFA0		4
-#define R8A7790_CLK_MSIOF2		5
-#define R8A7790_CLK_SCIFB0		6
-#define R8A7790_CLK_SCIFB1		7
-#define R8A7790_CLK_MSIOF1		8
-#define R8A7790_CLK_MSIOF3		15
-#define R8A7790_CLK_SCIFB2		16
-#define R8A7790_CLK_SYS_DMAC1		18
-#define R8A7790_CLK_SYS_DMAC0		19
-
-/* MSTP3 */
-#define R8A7790_CLK_IIC2		0
-#define R8A7790_CLK_TPU0		4
-#define R8A7790_CLK_MMCIF1		5
-#define R8A7790_CLK_SCIF2		10
-#define R8A7790_CLK_SDHI3		11
-#define R8A7790_CLK_SDHI2		12
-#define R8A7790_CLK_SDHI1		13
-#define R8A7790_CLK_SDHI0		14
-#define R8A7790_CLK_MMCIF0		15
-#define R8A7790_CLK_IIC0		18
-#define R8A7790_CLK_PCIEC		19
-#define R8A7790_CLK_IIC1		23
-#define R8A7790_CLK_SSUSB		28
-#define R8A7790_CLK_CMT1		29
-#define R8A7790_CLK_USBDMAC0		30
-#define R8A7790_CLK_USBDMAC1		31
-
-/* MSTP4 */
-#define R8A7790_CLK_IRQC		7
-#define R8A7790_CLK_INTC_SYS		8
-
-/* MSTP5 */
-#define R8A7790_CLK_AUDIO_DMAC1		1
-#define R8A7790_CLK_AUDIO_DMAC0		2
-#define R8A7790_CLK_ADSP_MOD		6
-#define R8A7790_CLK_THERMAL		22
-#define R8A7790_CLK_PWM			23
-
-/* MSTP7 */
-#define R8A7790_CLK_EHCI		3
-#define R8A7790_CLK_HSUSB		4
-#define R8A7790_CLK_HSCIF1		16
-#define R8A7790_CLK_HSCIF0		17
-#define R8A7790_CLK_SCIF1		20
-#define R8A7790_CLK_SCIF0		21
-#define R8A7790_CLK_DU2			22
-#define R8A7790_CLK_DU1			23
-#define R8A7790_CLK_DU0			24
-#define R8A7790_CLK_LVDS1		25
-#define R8A7790_CLK_LVDS0		26
-
-/* MSTP8 */
-#define R8A7790_CLK_MLB			2
-#define R8A7790_CLK_VIN3		8
-#define R8A7790_CLK_VIN2		9
-#define R8A7790_CLK_VIN1		10
-#define R8A7790_CLK_VIN0		11
-#define R8A7790_CLK_ETHERAVB		12
-#define R8A7790_CLK_ETHER		13
-#define R8A7790_CLK_SATA1		14
-#define R8A7790_CLK_SATA0		15
-
-/* MSTP9 */
-#define R8A7790_CLK_GPIO5		7
-#define R8A7790_CLK_GPIO4		8
-#define R8A7790_CLK_GPIO3		9
-#define R8A7790_CLK_GPIO2		10
-#define R8A7790_CLK_GPIO1		11
-#define R8A7790_CLK_GPIO0		12
-#define R8A7790_CLK_RCAN1		15
-#define R8A7790_CLK_RCAN0		16
-#define R8A7790_CLK_QSPI_MOD		17
-#define R8A7790_CLK_IICDVFS		26
-#define R8A7790_CLK_I2C3		28
-#define R8A7790_CLK_I2C2		29
-#define R8A7790_CLK_I2C1		30
-#define R8A7790_CLK_I2C0		31
-
-/* MSTP10 */
-#define R8A7790_CLK_SSI_ALL		5
-#define R8A7790_CLK_SSI9		6
-#define R8A7790_CLK_SSI8		7
-#define R8A7790_CLK_SSI7		8
-#define R8A7790_CLK_SSI6		9
-#define R8A7790_CLK_SSI5		10
-#define R8A7790_CLK_SSI4		11
-#define R8A7790_CLK_SSI3		12
-#define R8A7790_CLK_SSI2		13
-#define R8A7790_CLK_SSI1		14
-#define R8A7790_CLK_SSI0		15
-#define R8A7790_CLK_SCU_ALL		17
-#define R8A7790_CLK_SCU_DVC1		18
-#define R8A7790_CLK_SCU_DVC0		19
-#define R8A7790_CLK_SCU_CTU1_MIX1	20
-#define R8A7790_CLK_SCU_CTU0_MIX0	21
-#define R8A7790_CLK_SCU_SRC9		22
-#define R8A7790_CLK_SCU_SRC8		23
-#define R8A7790_CLK_SCU_SRC7		24
-#define R8A7790_CLK_SCU_SRC6		25
-#define R8A7790_CLK_SCU_SRC5		26
-#define R8A7790_CLK_SCU_SRC4		27
-#define R8A7790_CLK_SCU_SRC3		28
-#define R8A7790_CLK_SCU_SRC2		29
-#define R8A7790_CLK_SCU_SRC1		30
-#define R8A7790_CLK_SCU_SRC0		31
-
-#endif /* __DT_BINDINGS_CLOCK_R8A7790_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/r8a7791-clock.h b/dts/upstream/include/dt-bindings/clock/r8a7791-clock.h
deleted file mode 100644
index bb4f18b1b3d..00000000000
--- a/dts/upstream/include/dt-bindings/clock/r8a7791-clock.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright 2013 Ideas On Board SPRL
- */
-
-#ifndef __DT_BINDINGS_CLOCK_R8A7791_H__
-#define __DT_BINDINGS_CLOCK_R8A7791_H__
-
-/* CPG */
-#define R8A7791_CLK_MAIN		0
-#define R8A7791_CLK_PLL0		1
-#define R8A7791_CLK_PLL1		2
-#define R8A7791_CLK_PLL3		3
-#define R8A7791_CLK_LB			4
-#define R8A7791_CLK_QSPI		5
-#define R8A7791_CLK_SDH			6
-#define R8A7791_CLK_SD0			7
-#define R8A7791_CLK_Z			8
-#define R8A7791_CLK_RCAN		9
-#define R8A7791_CLK_ADSP		10
-
-/* MSTP0 */
-#define R8A7791_CLK_MSIOF0		0
-
-/* MSTP1 */
-#define R8A7791_CLK_VCP0		1
-#define R8A7791_CLK_VPC0		3
-#define R8A7791_CLK_JPU			6
-#define R8A7791_CLK_SSP1		9
-#define R8A7791_CLK_TMU1		11
-#define R8A7791_CLK_3DG			12
-#define R8A7791_CLK_2DDMAC		15
-#define R8A7791_CLK_FDP1_1		18
-#define R8A7791_CLK_FDP1_0		19
-#define R8A7791_CLK_TMU3		21
-#define R8A7791_CLK_TMU2		22
-#define R8A7791_CLK_CMT0		24
-#define R8A7791_CLK_TMU0		25
-#define R8A7791_CLK_VSP1_DU1		27
-#define R8A7791_CLK_VSP1_DU0		28
-#define R8A7791_CLK_VSP1_S		31
-
-/* MSTP2 */
-#define R8A7791_CLK_SCIFA2		2
-#define R8A7791_CLK_SCIFA1		3
-#define R8A7791_CLK_SCIFA0		4
-#define R8A7791_CLK_MSIOF2		5
-#define R8A7791_CLK_SCIFB0		6
-#define R8A7791_CLK_SCIFB1		7
-#define R8A7791_CLK_MSIOF1		8
-#define R8A7791_CLK_SCIFB2		16
-#define R8A7791_CLK_SYS_DMAC1		18
-#define R8A7791_CLK_SYS_DMAC0		19
-
-/* MSTP3 */
-#define R8A7791_CLK_TPU0		4
-#define R8A7791_CLK_SDHI2		11
-#define R8A7791_CLK_SDHI1		12
-#define R8A7791_CLK_SDHI0		14
-#define R8A7791_CLK_MMCIF0		15
-#define R8A7791_CLK_IIC0		18
-#define R8A7791_CLK_PCIEC		19
-#define R8A7791_CLK_IIC1		23
-#define R8A7791_CLK_SSUSB		28
-#define R8A7791_CLK_CMT1		29
-#define R8A7791_CLK_USBDMAC0		30
-#define R8A7791_CLK_USBDMAC1		31
-
-/* MSTP4 */
-#define R8A7791_CLK_IRQC		7
-#define R8A7791_CLK_INTC_SYS		8
-
-/* MSTP5 */
-#define R8A7791_CLK_AUDIO_DMAC1		1
-#define R8A7791_CLK_AUDIO_DMAC0		2
-#define R8A7791_CLK_ADSP_MOD		6
-#define R8A7791_CLK_THERMAL		22
-#define R8A7791_CLK_PWM			23
-
-/* MSTP7 */
-#define R8A7791_CLK_EHCI		3
-#define R8A7791_CLK_HSUSB		4
-#define R8A7791_CLK_HSCIF2		13
-#define R8A7791_CLK_SCIF5		14
-#define R8A7791_CLK_SCIF4		15
-#define R8A7791_CLK_HSCIF1		16
-#define R8A7791_CLK_HSCIF0		17
-#define R8A7791_CLK_SCIF3		18
-#define R8A7791_CLK_SCIF2		19
-#define R8A7791_CLK_SCIF1		20
-#define R8A7791_CLK_SCIF0		21
-#define R8A7791_CLK_DU1			23
-#define R8A7791_CLK_DU0			24
-#define R8A7791_CLK_LVDS0		26
-
-/* MSTP8 */
-#define R8A7791_CLK_IPMMU_SGX		0
-#define R8A7791_CLK_MLB			2
-#define R8A7791_CLK_VIN2		9
-#define R8A7791_CLK_VIN1		10
-#define R8A7791_CLK_VIN0		11
-#define R8A7791_CLK_ETHERAVB		12
-#define R8A7791_CLK_ETHER		13
-#define R8A7791_CLK_SATA1		14
-#define R8A7791_CLK_SATA0		15
-
-/* MSTP9 */
-#define R8A7791_CLK_GYROADC		1
-#define R8A7791_CLK_GPIO7		4
-#define R8A7791_CLK_GPIO6		5
-#define R8A7791_CLK_GPIO5		7
-#define R8A7791_CLK_GPIO4		8
-#define R8A7791_CLK_GPIO3		9
-#define R8A7791_CLK_GPIO2		10
-#define R8A7791_CLK_GPIO1		11
-#define R8A7791_CLK_GPIO0		12
-#define R8A7791_CLK_RCAN1		15
-#define R8A7791_CLK_RCAN0		16
-#define R8A7791_CLK_QSPI_MOD		17
-#define R8A7791_CLK_I2C5		25
-#define R8A7791_CLK_IICDVFS		26
-#define R8A7791_CLK_I2C4		27
-#define R8A7791_CLK_I2C3		28
-#define R8A7791_CLK_I2C2		29
-#define R8A7791_CLK_I2C1		30
-#define R8A7791_CLK_I2C0		31
-
-/* MSTP10 */
-#define R8A7791_CLK_SSI_ALL		5
-#define R8A7791_CLK_SSI9		6
-#define R8A7791_CLK_SSI8		7
-#define R8A7791_CLK_SSI7		8
-#define R8A7791_CLK_SSI6		9
-#define R8A7791_CLK_SSI5		10
-#define R8A7791_CLK_SSI4		11
-#define R8A7791_CLK_SSI3		12
-#define R8A7791_CLK_SSI2		13
-#define R8A7791_CLK_SSI1		14
-#define R8A7791_CLK_SSI0		15
-#define R8A7791_CLK_SCU_ALL		17
-#define R8A7791_CLK_SCU_DVC1		18
-#define R8A7791_CLK_SCU_DVC0		19
-#define R8A7791_CLK_SCU_CTU1_MIX1	20
-#define R8A7791_CLK_SCU_CTU0_MIX0	21
-#define R8A7791_CLK_SCU_SRC9		22
-#define R8A7791_CLK_SCU_SRC8		23
-#define R8A7791_CLK_SCU_SRC7		24
-#define R8A7791_CLK_SCU_SRC6		25
-#define R8A7791_CLK_SCU_SRC5		26
-#define R8A7791_CLK_SCU_SRC4		27
-#define R8A7791_CLK_SCU_SRC3		28
-#define R8A7791_CLK_SCU_SRC2		29
-#define R8A7791_CLK_SCU_SRC1		30
-#define R8A7791_CLK_SCU_SRC0		31
-
-/* MSTP11 */
-#define R8A7791_CLK_SCIFA3		6
-#define R8A7791_CLK_SCIFA4		7
-#define R8A7791_CLK_SCIFA5		8
-
-#endif /* __DT_BINDINGS_CLOCK_R8A7791_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/r8a7792-clock.h b/dts/upstream/include/dt-bindings/clock/r8a7792-clock.h
deleted file mode 100644
index 2948d9ce3a1..00000000000
--- a/dts/upstream/include/dt-bindings/clock/r8a7792-clock.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2016 Cogent Embedded, Inc.
- */
-
-#ifndef __DT_BINDINGS_CLOCK_R8A7792_H__
-#define __DT_BINDINGS_CLOCK_R8A7792_H__
-
-/* CPG */
-#define R8A7792_CLK_MAIN		0
-#define R8A7792_CLK_PLL0		1
-#define R8A7792_CLK_PLL1		2
-#define R8A7792_CLK_PLL3		3
-#define R8A7792_CLK_LB			4
-#define R8A7792_CLK_QSPI		5
-
-/* MSTP0 */
-#define R8A7792_CLK_MSIOF0		0
-
-/* MSTP1 */
-#define R8A7792_CLK_JPU			6
-#define R8A7792_CLK_TMU1		11
-#define R8A7792_CLK_TMU3		21
-#define R8A7792_CLK_TMU2		22
-#define R8A7792_CLK_CMT0		24
-#define R8A7792_CLK_TMU0		25
-#define R8A7792_CLK_VSP1DU1		27
-#define R8A7792_CLK_VSP1DU0		28
-#define R8A7792_CLK_VSP1_SY		31
-
-/* MSTP2 */
-#define R8A7792_CLK_MSIOF1		8
-#define R8A7792_CLK_SYS_DMAC1		18
-#define R8A7792_CLK_SYS_DMAC0		19
-
-/* MSTP3 */
-#define R8A7792_CLK_TPU0		4
-#define R8A7792_CLK_SDHI0		14
-#define R8A7792_CLK_CMT1		29
-
-/* MSTP4 */
-#define R8A7792_CLK_IRQC		7
-#define R8A7792_CLK_INTC_SYS		8
-
-/* MSTP5 */
-#define R8A7792_CLK_AUDIO_DMAC0		2
-#define R8A7792_CLK_THERMAL		22
-#define R8A7792_CLK_PWM			23
-
-/* MSTP7 */
-#define R8A7792_CLK_HSCIF1		16
-#define R8A7792_CLK_HSCIF0		17
-#define R8A7792_CLK_SCIF3		18
-#define R8A7792_CLK_SCIF2		19
-#define R8A7792_CLK_SCIF1		20
-#define R8A7792_CLK_SCIF0		21
-#define R8A7792_CLK_DU1			23
-#define R8A7792_CLK_DU0			24
-
-/* MSTP8 */
-#define R8A7792_CLK_VIN5		4
-#define R8A7792_CLK_VIN4		5
-#define R8A7792_CLK_VIN3		8
-#define R8A7792_CLK_VIN2		9
-#define R8A7792_CLK_VIN1		10
-#define R8A7792_CLK_VIN0		11
-#define R8A7792_CLK_ETHERAVB		12
-
-/* MSTP9 */
-#define R8A7792_CLK_GPIO7		4
-#define R8A7792_CLK_GPIO6		5
-#define R8A7792_CLK_GPIO5		7
-#define R8A7792_CLK_GPIO4		8
-#define R8A7792_CLK_GPIO3		9
-#define R8A7792_CLK_GPIO2		10
-#define R8A7792_CLK_GPIO1		11
-#define R8A7792_CLK_GPIO0		12
-#define R8A7792_CLK_GPIO11		13
-#define R8A7792_CLK_GPIO10		14
-#define R8A7792_CLK_CAN1		15
-#define R8A7792_CLK_CAN0		16
-#define R8A7792_CLK_QSPI_MOD		17
-#define R8A7792_CLK_GPIO9		19
-#define R8A7792_CLK_GPIO8		21
-#define R8A7792_CLK_I2C5		25
-#define R8A7792_CLK_IICDVFS		26
-#define R8A7792_CLK_I2C4		27
-#define R8A7792_CLK_I2C3		28
-#define R8A7792_CLK_I2C2		29
-#define R8A7792_CLK_I2C1		30
-#define R8A7792_CLK_I2C0		31
-
-/* MSTP10 */
-#define R8A7792_CLK_SSI_ALL		5
-#define R8A7792_CLK_SSI4		11
-#define R8A7792_CLK_SSI3		12
-
-#endif /* __DT_BINDINGS_CLOCK_R8A7792_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/r8a7793-clock.h b/dts/upstream/include/dt-bindings/clock/r8a7793-clock.h
deleted file mode 100644
index 49c66d8ed17..00000000000
--- a/dts/upstream/include/dt-bindings/clock/r8a7793-clock.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * r8a7793 clock definition
- *
- * Copyright (C) 2014  Renesas Electronics Corporation
- */
-
-#ifndef __DT_BINDINGS_CLOCK_R8A7793_H__
-#define __DT_BINDINGS_CLOCK_R8A7793_H__
-
-/* CPG */
-#define R8A7793_CLK_MAIN		0
-#define R8A7793_CLK_PLL0		1
-#define R8A7793_CLK_PLL1		2
-#define R8A7793_CLK_PLL3		3
-#define R8A7793_CLK_LB			4
-#define R8A7793_CLK_QSPI		5
-#define R8A7793_CLK_SDH			6
-#define R8A7793_CLK_SD0			7
-#define R8A7793_CLK_Z			8
-#define R8A7793_CLK_RCAN		9
-#define R8A7793_CLK_ADSP		10
-
-/* MSTP0 */
-#define R8A7793_CLK_MSIOF0		0
-
-/* MSTP1 */
-#define R8A7793_CLK_VCP0		1
-#define R8A7793_CLK_VPC0		3
-#define R8A7793_CLK_SSP1		9
-#define R8A7793_CLK_TMU1		11
-#define R8A7793_CLK_3DG			12
-#define R8A7793_CLK_2DDMAC		15
-#define R8A7793_CLK_FDP1_1		18
-#define R8A7793_CLK_FDP1_0		19
-#define R8A7793_CLK_TMU3		21
-#define R8A7793_CLK_TMU2		22
-#define R8A7793_CLK_CMT0		24
-#define R8A7793_CLK_TMU0		25
-#define R8A7793_CLK_VSP1_DU1		27
-#define R8A7793_CLK_VSP1_DU0		28
-#define R8A7793_CLK_VSP1_S		31
-
-/* MSTP2 */
-#define R8A7793_CLK_SCIFA2		2
-#define R8A7793_CLK_SCIFA1		3
-#define R8A7793_CLK_SCIFA0		4
-#define R8A7793_CLK_MSIOF2		5
-#define R8A7793_CLK_SCIFB0		6
-#define R8A7793_CLK_SCIFB1		7
-#define R8A7793_CLK_MSIOF1		8
-#define R8A7793_CLK_SCIFB2		16
-#define R8A7793_CLK_SYS_DMAC1		18
-#define R8A7793_CLK_SYS_DMAC0		19
-
-/* MSTP3 */
-#define R8A7793_CLK_TPU0		4
-#define R8A7793_CLK_SDHI2		11
-#define R8A7793_CLK_SDHI1		12
-#define R8A7793_CLK_SDHI0		14
-#define R8A7793_CLK_MMCIF0		15
-#define R8A7793_CLK_IIC0		18
-#define R8A7793_CLK_PCIEC		19
-#define R8A7793_CLK_IIC1		23
-#define R8A7793_CLK_SSUSB		28
-#define R8A7793_CLK_CMT1		29
-#define R8A7793_CLK_USBDMAC0		30
-#define R8A7793_CLK_USBDMAC1		31
-
-/* MSTP4 */
-#define R8A7793_CLK_IRQC		7
-#define R8A7793_CLK_INTC_SYS		8
-
-/* MSTP5 */
-#define R8A7793_CLK_AUDIO_DMAC1		1
-#define R8A7793_CLK_AUDIO_DMAC0		2
-#define R8A7793_CLK_ADSP_MOD		6
-#define R8A7793_CLK_THERMAL		22
-#define R8A7793_CLK_PWM			23
-
-/* MSTP7 */
-#define R8A7793_CLK_EHCI		3
-#define R8A7793_CLK_HSUSB		4
-#define R8A7793_CLK_HSCIF2		13
-#define R8A7793_CLK_SCIF5		14
-#define R8A7793_CLK_SCIF4		15
-#define R8A7793_CLK_HSCIF1		16
-#define R8A7793_CLK_HSCIF0		17
-#define R8A7793_CLK_SCIF3		18
-#define R8A7793_CLK_SCIF2		19
-#define R8A7793_CLK_SCIF1		20
-#define R8A7793_CLK_SCIF0		21
-#define R8A7793_CLK_DU1			23
-#define R8A7793_CLK_DU0			24
-#define R8A7793_CLK_LVDS0		26
-
-/* MSTP8 */
-#define R8A7793_CLK_IPMMU_SGX		0
-#define R8A7793_CLK_VIN2		9
-#define R8A7793_CLK_VIN1		10
-#define R8A7793_CLK_VIN0		11
-#define R8A7793_CLK_ETHER		13
-#define R8A7793_CLK_SATA1		14
-#define R8A7793_CLK_SATA0		15
-
-/* MSTP9 */
-#define R8A7793_CLK_GPIO7		4
-#define R8A7793_CLK_GPIO6		5
-#define R8A7793_CLK_GPIO5		7
-#define R8A7793_CLK_GPIO4		8
-#define R8A7793_CLK_GPIO3		9
-#define R8A7793_CLK_GPIO2		10
-#define R8A7793_CLK_GPIO1		11
-#define R8A7793_CLK_GPIO0		12
-#define R8A7793_CLK_RCAN1		15
-#define R8A7793_CLK_RCAN0		16
-#define R8A7793_CLK_QSPI_MOD		17
-#define R8A7793_CLK_I2C5		25
-#define R8A7793_CLK_IICDVFS		26
-#define R8A7793_CLK_I2C4		27
-#define R8A7793_CLK_I2C3		28
-#define R8A7793_CLK_I2C2		29
-#define R8A7793_CLK_I2C1		30
-#define R8A7793_CLK_I2C0		31
-
-/* MSTP10 */
-#define R8A7793_CLK_SSI_ALL		5
-#define R8A7793_CLK_SSI9		6
-#define R8A7793_CLK_SSI8		7
-#define R8A7793_CLK_SSI7		8
-#define R8A7793_CLK_SSI6		9
-#define R8A7793_CLK_SSI5		10
-#define R8A7793_CLK_SSI4		11
-#define R8A7793_CLK_SSI3		12
-#define R8A7793_CLK_SSI2		13
-#define R8A7793_CLK_SSI1		14
-#define R8A7793_CLK_SSI0		15
-#define R8A7793_CLK_SCU_ALL		17
-#define R8A7793_CLK_SCU_DVC1		18
-#define R8A7793_CLK_SCU_DVC0		19
-#define R8A7793_CLK_SCU_CTU1_MIX1	20
-#define R8A7793_CLK_SCU_CTU0_MIX0	21
-#define R8A7793_CLK_SCU_SRC9		22
-#define R8A7793_CLK_SCU_SRC8		23
-#define R8A7793_CLK_SCU_SRC7		24
-#define R8A7793_CLK_SCU_SRC6		25
-#define R8A7793_CLK_SCU_SRC5		26
-#define R8A7793_CLK_SCU_SRC4		27
-#define R8A7793_CLK_SCU_SRC3		28
-#define R8A7793_CLK_SCU_SRC2		29
-#define R8A7793_CLK_SCU_SRC1		30
-#define R8A7793_CLK_SCU_SRC0		31
-
-/* MSTP11 */
-#define R8A7793_CLK_SCIFA3		6
-#define R8A7793_CLK_SCIFA4		7
-#define R8A7793_CLK_SCIFA5		8
-
-#endif /* __DT_BINDINGS_CLOCK_R8A7793_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/r8a7794-clock.h b/dts/upstream/include/dt-bindings/clock/r8a7794-clock.h
deleted file mode 100644
index 649f005782d..00000000000
--- a/dts/upstream/include/dt-bindings/clock/r8a7794-clock.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- * Copyright 2013 Ideas On Board SPRL
- */
-
-#ifndef __DT_BINDINGS_CLOCK_R8A7794_H__
-#define __DT_BINDINGS_CLOCK_R8A7794_H__
-
-/* CPG */
-#define R8A7794_CLK_MAIN		0
-#define R8A7794_CLK_PLL0		1
-#define R8A7794_CLK_PLL1		2
-#define R8A7794_CLK_PLL3		3
-#define R8A7794_CLK_LB			4
-#define R8A7794_CLK_QSPI		5
-#define R8A7794_CLK_SDH			6
-#define R8A7794_CLK_SD0			7
-#define R8A7794_CLK_RCAN		8
-
-/* MSTP0 */
-#define R8A7794_CLK_MSIOF0		0
-
-/* MSTP1 */
-#define R8A7794_CLK_VCP0		1
-#define R8A7794_CLK_VPC0		3
-#define R8A7794_CLK_TMU1		11
-#define R8A7794_CLK_3DG			12
-#define R8A7794_CLK_2DDMAC		15
-#define R8A7794_CLK_FDP1_0		19
-#define R8A7794_CLK_TMU3		21
-#define R8A7794_CLK_TMU2		22
-#define R8A7794_CLK_CMT0		24
-#define R8A7794_CLK_TMU0		25
-#define R8A7794_CLK_VSP1_DU0		28
-#define R8A7794_CLK_VSP1_S		31
-
-/* MSTP2 */
-#define R8A7794_CLK_SCIFA2		2
-#define R8A7794_CLK_SCIFA1		3
-#define R8A7794_CLK_SCIFA0		4
-#define R8A7794_CLK_MSIOF2		5
-#define R8A7794_CLK_SCIFB0		6
-#define R8A7794_CLK_SCIFB1		7
-#define R8A7794_CLK_MSIOF1		8
-#define R8A7794_CLK_SCIFB2		16
-#define R8A7794_CLK_SYS_DMAC1		18
-#define R8A7794_CLK_SYS_DMAC0		19
-
-/* MSTP3 */
-#define R8A7794_CLK_SDHI2		11
-#define R8A7794_CLK_SDHI1		12
-#define R8A7794_CLK_SDHI0		14
-#define R8A7794_CLK_MMCIF0		15
-#define R8A7794_CLK_IIC0		18
-#define R8A7794_CLK_IIC1		23
-#define R8A7794_CLK_CMT1		29
-#define R8A7794_CLK_USBDMAC0		30
-#define R8A7794_CLK_USBDMAC1		31
-
-/* MSTP4 */
-#define R8A7794_CLK_IRQC		7
-#define R8A7794_CLK_INTC_SYS		8
-
-/* MSTP5 */
-#define R8A7794_CLK_AUDIO_DMAC0		2
-#define R8A7794_CLK_PWM			23
-
-/* MSTP7 */
-#define R8A7794_CLK_EHCI		3
-#define R8A7794_CLK_HSUSB		4
-#define R8A7794_CLK_HSCIF2		13
-#define R8A7794_CLK_SCIF5		14
-#define R8A7794_CLK_SCIF4		15
-#define R8A7794_CLK_HSCIF1		16
-#define R8A7794_CLK_HSCIF0		17
-#define R8A7794_CLK_SCIF3		18
-#define R8A7794_CLK_SCIF2		19
-#define R8A7794_CLK_SCIF1		20
-#define R8A7794_CLK_SCIF0		21
-#define R8A7794_CLK_DU1			23
-#define R8A7794_CLK_DU0			24
-
-/* MSTP8 */
-#define R8A7794_CLK_VIN1		10
-#define R8A7794_CLK_VIN0		11
-#define R8A7794_CLK_ETHERAVB		12
-#define R8A7794_CLK_ETHER		13
-
-/* MSTP9 */
-#define R8A7794_CLK_GPIO6		5
-#define R8A7794_CLK_GPIO5		7
-#define R8A7794_CLK_GPIO4		8
-#define R8A7794_CLK_GPIO3		9
-#define R8A7794_CLK_GPIO2		10
-#define R8A7794_CLK_GPIO1		11
-#define R8A7794_CLK_GPIO0		12
-#define R8A7794_CLK_RCAN1		15
-#define R8A7794_CLK_RCAN0		16
-#define R8A7794_CLK_QSPI_MOD		17
-#define R8A7794_CLK_I2C5		25
-#define R8A7794_CLK_I2C4		27
-#define R8A7794_CLK_I2C3		28
-#define R8A7794_CLK_I2C2		29
-#define R8A7794_CLK_I2C1		30
-#define R8A7794_CLK_I2C0		31
-
-/* MSTP10 */
-#define R8A7794_CLK_SSI_ALL		5
-#define R8A7794_CLK_SSI9		6
-#define R8A7794_CLK_SSI8		7
-#define R8A7794_CLK_SSI7		8
-#define R8A7794_CLK_SSI6		9
-#define R8A7794_CLK_SSI5		10
-#define R8A7794_CLK_SSI4		11
-#define R8A7794_CLK_SSI3		12
-#define R8A7794_CLK_SSI2		13
-#define R8A7794_CLK_SSI1		14
-#define R8A7794_CLK_SSI0		15
-#define R8A7794_CLK_SCU_ALL		17
-#define R8A7794_CLK_SCU_DVC1		18
-#define R8A7794_CLK_SCU_DVC0		19
-#define R8A7794_CLK_SCU_CTU1_MIX1	20
-#define R8A7794_CLK_SCU_CTU0_MIX0	21
-#define R8A7794_CLK_SCU_SRC6		25
-#define R8A7794_CLK_SCU_SRC5		26
-#define R8A7794_CLK_SCU_SRC4		27
-#define R8A7794_CLK_SCU_SRC3		28
-#define R8A7794_CLK_SCU_SRC2		29
-#define R8A7794_CLK_SCU_SRC1		30
-
-/* MSTP11 */
-#define R8A7794_CLK_SCIFA3		6
-#define R8A7794_CLK_SCIFA4		7
-#define R8A7794_CLK_SCIFA5		8
-
-#endif /* __DT_BINDINGS_CLOCK_R8A7794_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/rk3128-cru.h b/dts/upstream/include/dt-bindings/clock/rk3128-cru.h
index 6a47825dac5..b609fcf9650 100644
--- a/dts/upstream/include/dt-bindings/clock/rk3128-cru.h
+++ b/dts/upstream/include/dt-bindings/clock/rk3128-cru.h
@@ -116,6 +116,7 @@
 #define PCLK_GMAC		367
 #define PCLK_PMU_PRE		368
 #define PCLK_SIM_CARD		369
+#define PCLK_MIPIPHY		370
 
 /* hclk gates */
 #define HCLK_SPDIF		440
@@ -143,8 +144,7 @@
 #define HCLK_TSP		475
 #define HCLK_CRYPTO		476
 #define HCLK_PERI		478
-
-#define CLK_NR_CLKS		(HCLK_PERI + 1)
+#define HCLK_SFC		479
 
 /* soft-reset indices */
 #define SRST_CORE0_PO		0
diff --git a/dts/upstream/include/dt-bindings/clock/rk3188-cru-common.h b/dts/upstream/include/dt-bindings/clock/rk3188-cru-common.h
index afad90680fc..01e14ab252a 100644
--- a/dts/upstream/include/dt-bindings/clock/rk3188-cru-common.h
+++ b/dts/upstream/include/dt-bindings/clock/rk3188-cru-common.h
@@ -132,8 +132,6 @@
 #define HCLK_VDPU		472
 #define HCLK_HDMI		473
 
-#define CLK_NR_CLKS		(HCLK_HDMI + 1)
-
 /* soft-reset indices */
 #define SRST_MCORE		2
 #define SRST_CORE0		3
diff --git a/dts/upstream/include/dt-bindings/clock/sophgo,sg2042-clkgen.h b/dts/upstream/include/dt-bindings/clock/sophgo,sg2042-clkgen.h
new file mode 100644
index 00000000000..84f7857317a
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/sophgo,sg2042-clkgen.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Technology Inc. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_SOPHGO_SG2042_CLKGEN_H__
+#define __DT_BINDINGS_SOPHGO_SG2042_CLKGEN_H__
+
+#define DIV_CLK_MPLL_RP_CPU_NORMAL_0	0
+#define DIV_CLK_MPLL_AXI_DDR_0		1
+#define DIV_CLK_FPLL_DDR01_1		2
+#define DIV_CLK_FPLL_DDR23_1		3
+#define DIV_CLK_FPLL_RP_CPU_NORMAL_1	4
+#define DIV_CLK_FPLL_50M_A53		5
+#define DIV_CLK_FPLL_TOP_RP_CMN_DIV2	6
+#define DIV_CLK_FPLL_UART_500M		7
+#define DIV_CLK_FPLL_AHB_LPC		8
+#define DIV_CLK_FPLL_EFUSE		9
+#define DIV_CLK_FPLL_TX_ETH0		10
+#define DIV_CLK_FPLL_PTP_REF_I_ETH0	11
+#define DIV_CLK_FPLL_REF_ETH0		12
+#define DIV_CLK_FPLL_EMMC		13
+#define DIV_CLK_FPLL_SD			14
+#define DIV_CLK_FPLL_TOP_AXI0		15
+#define DIV_CLK_FPLL_TOP_AXI_HSPERI	16
+#define DIV_CLK_FPLL_AXI_DDR_1		17
+#define DIV_CLK_FPLL_DIV_TIMER1		18
+#define DIV_CLK_FPLL_DIV_TIMER2		19
+#define DIV_CLK_FPLL_DIV_TIMER3		20
+#define DIV_CLK_FPLL_DIV_TIMER4		21
+#define DIV_CLK_FPLL_DIV_TIMER5		22
+#define DIV_CLK_FPLL_DIV_TIMER6		23
+#define DIV_CLK_FPLL_DIV_TIMER7		24
+#define DIV_CLK_FPLL_DIV_TIMER8		25
+#define DIV_CLK_FPLL_100K_EMMC		26
+#define DIV_CLK_FPLL_100K_SD		27
+#define DIV_CLK_FPLL_GPIO_DB		28
+#define DIV_CLK_DPLL0_DDR01_0		29
+#define DIV_CLK_DPLL1_DDR23_0		30
+
+#define GATE_CLK_RP_CPU_NORMAL_DIV0	31
+#define GATE_CLK_AXI_DDR_DIV0		32
+
+#define GATE_CLK_RP_CPU_NORMAL_DIV1	33
+#define GATE_CLK_A53_50M		34
+#define GATE_CLK_TOP_RP_CMN_DIV2	35
+#define GATE_CLK_HSDMA			36
+#define GATE_CLK_EMMC_100M		37
+#define GATE_CLK_SD_100M		38
+#define GATE_CLK_TX_ETH0		39
+#define GATE_CLK_PTP_REF_I_ETH0		40
+#define GATE_CLK_REF_ETH0		41
+#define GATE_CLK_UART_500M		42
+#define GATE_CLK_EFUSE			43
+
+#define GATE_CLK_AHB_LPC		44
+#define GATE_CLK_AHB_ROM		45
+#define GATE_CLK_AHB_SF			46
+
+#define GATE_CLK_APB_UART		47
+#define GATE_CLK_APB_TIMER		48
+#define GATE_CLK_APB_EFUSE		49
+#define GATE_CLK_APB_GPIO		50
+#define GATE_CLK_APB_GPIO_INTR		51
+#define GATE_CLK_APB_SPI		52
+#define GATE_CLK_APB_I2C		53
+#define GATE_CLK_APB_WDT		54
+#define GATE_CLK_APB_PWM		55
+#define GATE_CLK_APB_RTC		56
+
+#define GATE_CLK_AXI_PCIE0		57
+#define GATE_CLK_AXI_PCIE1		58
+#define GATE_CLK_SYSDMA_AXI		59
+#define GATE_CLK_AXI_DBG_I2C		60
+#define GATE_CLK_AXI_SRAM		61
+#define GATE_CLK_AXI_ETH0		62
+#define GATE_CLK_AXI_EMMC		63
+#define GATE_CLK_AXI_SD			64
+#define GATE_CLK_TOP_AXI0		65
+#define GATE_CLK_TOP_AXI_HSPERI		66
+
+#define GATE_CLK_TIMER1			67
+#define GATE_CLK_TIMER2			68
+#define GATE_CLK_TIMER3			69
+#define GATE_CLK_TIMER4			70
+#define GATE_CLK_TIMER5			71
+#define GATE_CLK_TIMER6			72
+#define GATE_CLK_TIMER7			73
+#define GATE_CLK_TIMER8			74
+#define GATE_CLK_100K_EMMC		75
+#define GATE_CLK_100K_SD		76
+#define GATE_CLK_GPIO_DB		77
+
+#define GATE_CLK_AXI_DDR_DIV1		78
+#define GATE_CLK_DDR01_DIV1		79
+#define GATE_CLK_DDR23_DIV1		80
+
+#define GATE_CLK_DDR01_DIV0		81
+#define GATE_CLK_DDR23_DIV0		82
+
+#define GATE_CLK_DDR01			83
+#define GATE_CLK_DDR23			84
+#define GATE_CLK_RP_CPU_NORMAL		85
+#define GATE_CLK_AXI_DDR		86
+
+#define MUX_CLK_DDR01			87
+#define MUX_CLK_DDR23			88
+#define MUX_CLK_RP_CPU_NORMAL		89
+#define MUX_CLK_AXI_DDR			90
+
+#endif /* __DT_BINDINGS_SOPHGO_SG2042_CLKGEN_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/sophgo,sg2042-pll.h b/dts/upstream/include/dt-bindings/clock/sophgo,sg2042-pll.h
new file mode 100644
index 00000000000..2d519b3bf51
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/sophgo,sg2042-pll.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Technology Inc. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_SOPHGO_SG2042_PLL_H__
+#define __DT_BINDINGS_SOPHGO_SG2042_PLL_H__
+
+#define MPLL_CLK			0
+#define FPLL_CLK			1
+#define DPLL0_CLK			2
+#define DPLL1_CLK			3
+
+#endif /* __DT_BINDINGS_SOPHGO_SG2042_PLL_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/sophgo,sg2042-rpgate.h b/dts/upstream/include/dt-bindings/clock/sophgo,sg2042-rpgate.h
new file mode 100644
index 00000000000..8b4522d5f55
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/sophgo,sg2042-rpgate.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Technology Inc. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_SOPHGO_SG2042_RPGATE_H__
+#define __DT_BINDINGS_SOPHGO_SG2042_RPGATE_H__
+
+#define GATE_CLK_RXU0			0
+#define GATE_CLK_RXU1			1
+#define GATE_CLK_RXU2			2
+#define GATE_CLK_RXU3			3
+#define GATE_CLK_RXU4			4
+#define GATE_CLK_RXU5			5
+#define GATE_CLK_RXU6			6
+#define GATE_CLK_RXU7			7
+#define GATE_CLK_RXU8			8
+#define GATE_CLK_RXU9			9
+#define GATE_CLK_RXU10			10
+#define GATE_CLK_RXU11			11
+#define GATE_CLK_RXU12			12
+#define GATE_CLK_RXU13			13
+#define GATE_CLK_RXU14			14
+#define GATE_CLK_RXU15			15
+#define GATE_CLK_RXU16			16
+#define GATE_CLK_RXU17			17
+#define GATE_CLK_RXU18			18
+#define GATE_CLK_RXU19			19
+#define GATE_CLK_RXU20			20
+#define GATE_CLK_RXU21			21
+#define GATE_CLK_RXU22			22
+#define GATE_CLK_RXU23			23
+#define GATE_CLK_RXU24			24
+#define GATE_CLK_RXU25			25
+#define GATE_CLK_RXU26			26
+#define GATE_CLK_RXU27			27
+#define GATE_CLK_RXU28			28
+#define GATE_CLK_RXU29			29
+#define GATE_CLK_RXU30			30
+#define GATE_CLK_RXU31			31
+#define GATE_CLK_MP0			32
+#define GATE_CLK_MP1			33
+#define GATE_CLK_MP2			34
+#define GATE_CLK_MP3			35
+#define GATE_CLK_MP4			36
+#define GATE_CLK_MP5			37
+#define GATE_CLK_MP6			38
+#define GATE_CLK_MP7			39
+#define GATE_CLK_MP8			40
+#define GATE_CLK_MP9			41
+#define GATE_CLK_MP10			42
+#define GATE_CLK_MP11			43
+#define GATE_CLK_MP12			44
+#define GATE_CLK_MP13			45
+#define GATE_CLK_MP14			46
+#define GATE_CLK_MP15			47
+
+#endif /* __DT_BINDINGS_SOPHGO_SG2042_RPGATE_H__ */
diff --git a/dts/upstream/include/dt-bindings/clock/sun50i-h616-ccu.h b/dts/upstream/include/dt-bindings/clock/sun50i-h616-ccu.h
index 6f8f01e6762..ebb146ab7f8 100644
--- a/dts/upstream/include/dt-bindings/clock/sun50i-h616-ccu.h
+++ b/dts/upstream/include/dt-bindings/clock/sun50i-h616-ccu.h
@@ -112,5 +112,6 @@
 #define CLK_HDCP		126
 #define CLK_BUS_HDCP		127
 #define CLK_PLL_SYSTEM_32K	128
+#define CLK_BUS_GPADC		129
 
 #endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */
diff --git a/dts/upstream/include/dt-bindings/clock/thead,th1520-clk-ap.h b/dts/upstream/include/dt-bindings/clock/thead,th1520-clk-ap.h
new file mode 100644
index 00000000000..a199784b351
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/clock/thead,th1520-clk-ap.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2023 Vivo Communication Technology Co. Ltd.
+ * Authors: Yangtao Li <frank.li@vivo.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_TH1520_H_
+#define _DT_BINDINGS_CLK_TH1520_H_
+
+#define CLK_CPU_PLL0		0
+#define CLK_CPU_PLL1		1
+#define CLK_GMAC_PLL		2
+#define CLK_VIDEO_PLL		3
+#define CLK_DPU0_PLL		4
+#define CLK_DPU1_PLL		5
+#define CLK_TEE_PLL		6
+#define CLK_C910_I0		7
+#define CLK_C910		8
+#define CLK_BROM		9
+#define CLK_BMU			10
+#define CLK_AHB2_CPUSYS_HCLK	11
+#define CLK_APB3_CPUSYS_PCLK	12
+#define CLK_AXI4_CPUSYS2_ACLK	13
+#define CLK_AON2CPU_A2X		14
+#define CLK_X2X_CPUSYS		15
+#define CLK_AXI_ACLK		16
+#define CLK_CPU2AON_X2H		17
+#define CLK_PERI_AHB_HCLK	18
+#define CLK_CPU2PERI_X2H	19
+#define CLK_PERI_APB_PCLK	20
+#define CLK_PERI2APB_PCLK	21
+#define CLK_PERISYS_APB1_HCLK	22
+#define CLK_PERISYS_APB2_HCLK	23
+#define CLK_PERISYS_APB3_HCLK	24
+#define CLK_PERISYS_APB4_HCLK	25
+#define CLK_OSC12M		26
+#define CLK_OUT1		27
+#define CLK_OUT2		28
+#define CLK_OUT3		29
+#define CLK_OUT4		30
+#define CLK_APB_PCLK		31
+#define CLK_NPU			32
+#define CLK_NPU_AXI		33
+#define CLK_VI			34
+#define CLK_VI_AHB		35
+#define CLK_VO_AXI		36
+#define CLK_VP_APB		37
+#define CLK_VP_AXI		38
+#define CLK_CPU2VP		39
+#define CLK_VENC		40
+#define CLK_DPU0		41
+#define CLK_DPU1		42
+#define CLK_EMMC_SDIO		43
+#define CLK_GMAC1		44
+#define CLK_PADCTRL1		45
+#define CLK_DSMART		46
+#define CLK_PADCTRL0		47
+#define CLK_GMAC_AXI		48
+#define CLK_GPIO3		49
+#define CLK_GMAC0		50
+#define CLK_PWM			51
+#define CLK_QSPI0		52
+#define CLK_QSPI1		53
+#define CLK_SPI			54
+#define CLK_UART0_PCLK		55
+#define CLK_UART1_PCLK		56
+#define CLK_UART2_PCLK		57
+#define CLK_UART3_PCLK		58
+#define CLK_UART4_PCLK		59
+#define CLK_UART5_PCLK		60
+#define CLK_GPIO0		61
+#define CLK_GPIO1		62
+#define CLK_GPIO2		63
+#define CLK_I2C0		64
+#define CLK_I2C1		65
+#define CLK_I2C2		66
+#define CLK_I2C3		67
+#define CLK_I2C4		68
+#define CLK_I2C5		69
+#define CLK_SPINLOCK		70
+#define CLK_DMA			71
+#define CLK_MBOX0		72
+#define CLK_MBOX1		73
+#define CLK_MBOX2		74
+#define CLK_MBOX3		75
+#define CLK_WDT0		76
+#define CLK_WDT1		77
+#define CLK_TIMER0		78
+#define CLK_TIMER1		79
+#define CLK_SRAM0		80
+#define CLK_SRAM1		81
+#define CLK_SRAM2		82
+#define CLK_SRAM3		83
+#define CLK_PLL_GMAC_100M	84
+#define CLK_UART_SCLK		85
+#endif
diff --git a/dts/upstream/include/dt-bindings/i3c/i3c.h b/dts/upstream/include/dt-bindings/i3c/i3c.h
new file mode 100644
index 00000000000..373439218bb
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/i3c/i3c.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef _DT_BINDINGS_I3C_I3C_H
+#define _DT_BINDINGS_I3C_I3C_H
+
+#define I2C_FM      (1 << 4)
+#define I2C_FM_PLUS (0 << 4)
+
+#define I2C_FILTER  (0 << 5)
+#define I2C_NO_FILTER_HIGH_FREQUENCY    (1 << 5)
+#define I2C_NO_FILTER_LOW_FREQUENCY     (2 << 5)
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/iio/adc/mediatek,mt6357-auxadc.h b/dts/upstream/include/dt-bindings/iio/adc/mediatek,mt6357-auxadc.h
new file mode 100644
index 00000000000..03ebb1d2395
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/iio/adc/mediatek,mt6357-auxadc.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+
+#ifndef _DT_BINDINGS_MEDIATEK_MT6357_AUXADC_H
+#define _DT_BINDINGS_MEDIATEK_MT6357_AUXADC_H
+
+/* ADC Channel Index */
+#define MT6357_AUXADC_BATADC		0
+#define MT6357_AUXADC_ISENSE		1
+#define MT6357_AUXADC_VCDT		2
+#define MT6357_AUXADC_BAT_TEMP		3
+#define MT6357_AUXADC_CHIP_TEMP		4
+#define MT6357_AUXADC_ACCDET		5
+#define MT6357_AUXADC_VDCXO		6
+#define MT6357_AUXADC_TSX_TEMP		7
+#define MT6357_AUXADC_HPOFS_CAL		8
+#define MT6357_AUXADC_DCXO_TEMP		9
+#define MT6357_AUXADC_VCORE_TEMP	10
+#define MT6357_AUXADC_VPROC_TEMP	11
+#define MT6357_AUXADC_VBAT		12
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/iio/adc/mediatek,mt6358-auxadc.h b/dts/upstream/include/dt-bindings/iio/adc/mediatek,mt6358-auxadc.h
new file mode 100644
index 00000000000..efa08398faf
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/iio/adc/mediatek,mt6358-auxadc.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+
+#ifndef _DT_BINDINGS_MEDIATEK_MT6358_AUXADC_H
+#define _DT_BINDINGS_MEDIATEK_MT6358_AUXADC_H
+
+/* ADC Channel Index */
+#define MT6358_AUXADC_BATADC		0
+#define MT6358_AUXADC_VCDT		1
+#define MT6358_AUXADC_BAT_TEMP		2
+#define MT6358_AUXADC_CHIP_TEMP		3
+#define MT6358_AUXADC_ACCDET		4
+#define MT6358_AUXADC_VDCXO		5
+#define MT6358_AUXADC_TSX_TEMP		6
+#define MT6358_AUXADC_HPOFS_CAL		7
+#define MT6358_AUXADC_DCXO_TEMP		8
+#define MT6358_AUXADC_VBIF		9
+#define MT6358_AUXADC_VCORE_TEMP	10
+#define MT6358_AUXADC_VPROC_TEMP	11
+#define MT6358_AUXADC_VGPU_TEMP		12
+#define MT6358_AUXADC_VBAT		13
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/iio/adc/mediatek,mt6359-auxadc.h b/dts/upstream/include/dt-bindings/iio/adc/mediatek,mt6359-auxadc.h
new file mode 100644
index 00000000000..59826393ee7
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/iio/adc/mediatek,mt6359-auxadc.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+
+#ifndef _DT_BINDINGS_MEDIATEK_MT6359_AUXADC_H
+#define _DT_BINDINGS_MEDIATEK_MT6359_AUXADC_H
+
+/* ADC Channel Index */
+#define MT6359_AUXADC_BATADC		0
+#define MT6359_AUXADC_BAT_TEMP		1
+#define MT6359_AUXADC_CHIP_TEMP		2
+#define MT6359_AUXADC_ACCDET		3
+#define MT6359_AUXADC_VDCXO		4
+#define MT6359_AUXADC_TSX_TEMP		5
+#define MT6359_AUXADC_HPOFS_CAL		6
+#define MT6359_AUXADC_DCXO_TEMP		7
+#define MT6359_AUXADC_VBIF		8
+#define MT6359_AUXADC_VCORE_TEMP	9
+#define MT6359_AUXADC_VPROC_TEMP	10
+#define MT6359_AUXADC_VGPU_TEMP		11
+#define MT6359_AUXADC_VBAT		12
+#define MT6359_AUXADC_IBAT		13
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/input/cros-ec-keyboard.h b/dts/upstream/include/dt-bindings/input/cros-ec-keyboard.h
index f0ae03634a9..afc12f6aa64 100644
--- a/dts/upstream/include/dt-bindings/input/cros-ec-keyboard.h
+++ b/dts/upstream/include/dt-bindings/input/cros-ec-keyboard.h
@@ -100,4 +100,108 @@
 	MATRIX_KEY(0x07, 0x0b, KEY_UP)		\
 	MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
 
+/* No numpad */
+#define CROS_TOP_ROW_KEYMAP_V30 \
+	MATRIX_KEY(0x00, 0x01, KEY_F11)		/* T11 */	\
+	MATRIX_KEY(0x00, 0x02, KEY_F1)		/* T1 */	\
+	MATRIX_KEY(0x00, 0x04, KEY_F10)		/* T10 */	\
+	MATRIX_KEY(0x00, 0x0b, KEY_F14)		/* T14 */	\
+	MATRIX_KEY(0x00, 0x0c, KEY_F15)		/* T15 */	\
+	MATRIX_KEY(0x01, 0x02, KEY_F4)		/* T4 */	\
+	MATRIX_KEY(0x01, 0x04, KEY_F7)		/* T7 */	\
+	MATRIX_KEY(0x01, 0x05, KEY_F12)		/* T12 */	\
+	MATRIX_KEY(0x01, 0x09, KEY_F9)		/* T9 */	\
+	MATRIX_KEY(0x02, 0x02, KEY_F3)		/* T3 */	\
+	MATRIX_KEY(0x02, 0x04, KEY_F6)		/* T6 */	\
+	MATRIX_KEY(0x02, 0x0b, KEY_F8)		/* T8 */	\
+	MATRIX_KEY(0x03, 0x02, KEY_F2)		/* T2 */	\
+	MATRIX_KEY(0x03, 0x05, KEY_F13)		/* T13 */	\
+	MATRIX_KEY(0x04, 0x04, KEY_F5)		/* T5 */
+
+#define CROS_MAIN_KEYMAP_V30			/* Keycode */	\
+	MATRIX_KEY(0x00, 0x03, KEY_B)		/* 50 */	\
+	MATRIX_KEY(0x00, 0x05, KEY_N)		/* 51 */	\
+	MATRIX_KEY(0x00, 0x06, KEY_RO)		/* 56 (JIS) */	\
+	MATRIX_KEY(0x00, 0x08, KEY_EQUAL)	/* 13 */	\
+	MATRIX_KEY(0x00, 0x09, KEY_HOME)	/* 80 (Numpad) */	\
+	MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)	/* 62 */	\
+	MATRIX_KEY(0x00, 0x10, KEY_FN)		/* 127 */	\
+								\
+	MATRIX_KEY(0x01, 0x01, KEY_ESC)		/* 110 */	\
+	MATRIX_KEY(0x01, 0x03, KEY_G)		/* 35 */	\
+	MATRIX_KEY(0x01, 0x06, KEY_H)		/* 36 */	\
+	MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)	/* 41 */	\
+	MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)	/* 15 */	\
+	MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)	/* 65 (JIS) */	\
+	MATRIX_KEY(0x01, 0x0e, KEY_LEFTCTRL)	/* 58 */	\
+								\
+	MATRIX_KEY(0x02, 0x01, KEY_TAB)		/* 16 */	\
+	MATRIX_KEY(0x02, 0x03, KEY_T)		/* 21 */	\
+	MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)	/* 28 */	\
+	MATRIX_KEY(0x02, 0x06, KEY_Y)		/* 22 */	\
+	MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)	/* 27 */	\
+	MATRIX_KEY(0x02, 0x09, KEY_DELETE)	/* 76 (Numpad) */	\
+	MATRIX_KEY(0x02, 0x0c, KEY_PAGEUP)	/* 85 (Numpad) */	\
+	MATRIX_KEY(0x02, 0x011, KEY_YEN)	/* 14 (JIS) */	\
+								\
+	MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA)	/* Launcher */	\
+	MATRIX_KEY(0x03, 0x01, KEY_GRAVE)	/* 1 */	\
+	MATRIX_KEY(0x03, 0x03, KEY_5)		/* 6 */	\
+	MATRIX_KEY(0x03, 0x04, KEY_S)		/* 32 */	\
+	MATRIX_KEY(0x03, 0x06, KEY_MINUS)	/* 12 */	\
+	MATRIX_KEY(0x03, 0x08, KEY_6)		/* 7 */		\
+	MATRIX_KEY(0x03, 0x09, KEY_SLEEP)	/* Lock */	\
+	MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)	/* 29 */	\
+	MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)	/* 63 (JIS) */	\
+	MATRIX_KEY(0x03, 0x0e, KEY_RIGHTCTRL)	/* 64 */	\
+								\
+	MATRIX_KEY(0x04, 0x01, KEY_A)		/* 31 */	\
+	MATRIX_KEY(0x04, 0x02, KEY_D)		/* 33 */	\
+	MATRIX_KEY(0x04, 0x03, KEY_F)		/* 34 */	\
+	MATRIX_KEY(0x04, 0x05, KEY_K)		/* 38 */	\
+	MATRIX_KEY(0x04, 0x06, KEY_J)		/* 37 */	\
+	MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)	/* 40 */	\
+	MATRIX_KEY(0x04, 0x09, KEY_L)		/* 39 */	\
+	MATRIX_KEY(0x04, 0x0b, KEY_ENTER)	/* 43 */	\
+	MATRIX_KEY(0x04, 0x0c, KEY_END)		/* 81 (Numpad) */	\
+								\
+	MATRIX_KEY(0x05, 0x01, KEY_1)		/* 2 */	\
+	MATRIX_KEY(0x05, 0x02, KEY_COMMA)	/* 53 */	\
+	MATRIX_KEY(0x05, 0x03, KEY_DOT)		/* 54 */	\
+	MATRIX_KEY(0x05, 0x04, KEY_SLASH)	/* 55 */	\
+	MATRIX_KEY(0x05, 0x05, KEY_C)		/* 48 */	\
+	MATRIX_KEY(0x05, 0x06, KEY_SPACE)	/* 61 */	\
+	MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)	/* 44 */	\
+	MATRIX_KEY(0x05, 0x08, KEY_X)		/* 47 */	\
+	MATRIX_KEY(0x05, 0x09, KEY_V)		/* 49 */	\
+	MATRIX_KEY(0x05, 0x0b, KEY_M)		/* 52 */	\
+	MATRIX_KEY(0x05, 0x0c, KEY_PAGEDOWN)	/* 86 (Numpad) */	\
+								\
+	MATRIX_KEY(0x06, 0x01, KEY_Z)		/* 46 */	\
+	MATRIX_KEY(0x06, 0x02, KEY_3)		/* 4 */		\
+	MATRIX_KEY(0x06, 0x03, KEY_4)		/* 5 */		\
+	MATRIX_KEY(0x06, 0x04, KEY_2)		/* 3 */		\
+	MATRIX_KEY(0x06, 0x05, KEY_8)		/* 9 */		\
+	MATRIX_KEY(0x06, 0x06, KEY_0)		/* 11 */	\
+	MATRIX_KEY(0x06, 0x08, KEY_7)		/* 8 */		\
+	MATRIX_KEY(0x06, 0x09, KEY_9)		/* 10 */	\
+	MATRIX_KEY(0x06, 0x0b, KEY_DOWN)	/* 84 */	\
+	MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)	/* 89 */	\
+	MATRIX_KEY(0x06, 0x0d, KEY_LEFTALT)	/* 60 */	\
+	MATRIX_KEY(0x06, 0x0f, KEY_ASSISTANT)	/* 128 */	\
+	MATRIX_KEY(0x06, 0x11, KEY_BACKSLASH)	/* 42 (JIS, ISO) */	\
+								\
+	MATRIX_KEY(0x07, 0x01, KEY_U)		/* 23 */	\
+	MATRIX_KEY(0x07, 0x02, KEY_I)		/* 24 */	\
+	MATRIX_KEY(0x07, 0x03, KEY_O)		/* 25 */	\
+	MATRIX_KEY(0x07, 0x04, KEY_P)		/* 26 */	\
+	MATRIX_KEY(0x07, 0x05, KEY_Q)		/* 17 */	\
+	MATRIX_KEY(0x07, 0x06, KEY_W)		/* 18 */	\
+	MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)	/* 57 */	\
+	MATRIX_KEY(0x07, 0x08, KEY_E)		/* 19 */	\
+	MATRIX_KEY(0x07, 0x09, KEY_R)		/* 20 */	\
+	MATRIX_KEY(0x07, 0x0b, KEY_UP)		/* 83 */	\
+	MATRIX_KEY(0x07, 0x0c, KEY_LEFT)	/* 79 */	\
+	MATRIX_KEY(0x07, 0x11, KEY_102ND)	/* 45 (ISO) */
+
 #endif /* _CROS_EC_KEYBOARD_H */
diff --git a/dts/upstream/include/dt-bindings/interconnect/mediatek,mt8183.h b/dts/upstream/include/dt-bindings/interconnect/mediatek,mt8183.h
new file mode 100644
index 00000000000..1088c350258
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/interconnect/mediatek,mt8183.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Copyright (c) 2024 Collabora Ltd.
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_MEDIATEK_MT8183_H
+#define __DT_BINDINGS_INTERCONNECT_MEDIATEK_MT8183_H
+
+#define SLAVE_DDR_EMI		0
+#define MASTER_MCUSYS		1
+#define MASTER_MFG		2
+#define MASTER_MMSYS		3
+#define MASTER_MM_VPU		4
+#define MASTER_MM_DISP		5
+#define MASTER_MM_VDEC		6
+#define MASTER_MM_VENC		7
+#define MASTER_MM_CAM		8
+#define MASTER_MM_IMG		9
+#define MASTER_MM_MDP		10
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/interconnect/mediatek,mt8195.h b/dts/upstream/include/dt-bindings/interconnect/mediatek,mt8195.h
new file mode 100644
index 00000000000..33e0e6cde73
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/interconnect/mediatek,mt8195.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Copyright (c) 2024 Collabora Ltd.
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_MEDIATEK_MT8195_H
+#define __DT_BINDINGS_INTERCONNECT_MEDIATEK_MT8195_H
+
+#define SLAVE_DDR_EMI		0
+#define MASTER_MCUSYS		1
+#define MASTER_GPUSYS		2
+#define MASTER_MMSYS		3
+#define MASTER_MM_VPU		4
+#define MASTER_MM_DISP		5
+#define MASTER_MM_VDEC		6
+#define MASTER_MM_VENC		7
+#define MASTER_MM_CAM		8
+#define MASTER_MM_IMG		9
+#define MASTER_MM_MDP		10
+#define MASTER_VPUSYS		11
+#define MASTER_VPU_0		12
+#define MASTER_VPU_1		13
+#define MASTER_MDLASYS		14
+#define MASTER_MDLA_0		15
+#define MASTER_UFS		16
+#define MASTER_PCIE_0		17
+#define MASTER_PCIE_1		18
+#define MASTER_USB		19
+#define MASTER_DBGIF		20
+#define SLAVE_HRT_DDR_EMI	21
+#define MASTER_HRT_MMSYS	22
+#define MASTER_HRT_MM_DISP	23
+#define MASTER_HRT_MM_VDEC	24
+#define MASTER_HRT_MM_VENC	25
+#define MASTER_HRT_MM_CAM	26
+#define MASTER_HRT_MM_IMG	27
+#define MASTER_HRT_MM_MDP	28
+#define MASTER_HRT_DBGIF	29
+#define MASTER_WIFI		30
+#define MASTER_BT		31
+#define MASTER_NETSYS		32
+#endif
diff --git a/dts/upstream/include/dt-bindings/interconnect/qcom,ipq9574.h b/dts/upstream/include/dt-bindings/interconnect/qcom,ipq9574.h
new file mode 100644
index 00000000000..42019335c7d
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/interconnect/qcom,ipq9574.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+#ifndef INTERCONNECT_QCOM_IPQ9574_H
+#define INTERCONNECT_QCOM_IPQ9574_H
+
+#define MASTER_ANOC_PCIE0		0
+#define SLAVE_ANOC_PCIE0		1
+#define MASTER_SNOC_PCIE0		2
+#define SLAVE_SNOC_PCIE0		3
+#define MASTER_ANOC_PCIE1		4
+#define SLAVE_ANOC_PCIE1		5
+#define MASTER_SNOC_PCIE1		6
+#define SLAVE_SNOC_PCIE1		7
+#define MASTER_ANOC_PCIE2		8
+#define SLAVE_ANOC_PCIE2		9
+#define MASTER_SNOC_PCIE2		10
+#define SLAVE_SNOC_PCIE2		11
+#define MASTER_ANOC_PCIE3		12
+#define SLAVE_ANOC_PCIE3		13
+#define MASTER_SNOC_PCIE3		14
+#define SLAVE_SNOC_PCIE3		15
+#define MASTER_USB			16
+#define SLAVE_USB			17
+#define MASTER_USB_AXI			18
+#define SLAVE_USB_AXI			19
+#define MASTER_NSSNOC_NSSCC		20
+#define SLAVE_NSSNOC_NSSCC		21
+#define MASTER_NSSNOC_SNOC_0		22
+#define SLAVE_NSSNOC_SNOC_0		23
+#define MASTER_NSSNOC_SNOC_1		24
+#define SLAVE_NSSNOC_SNOC_1		25
+#define MASTER_NSSNOC_PCNOC_1		26
+#define SLAVE_NSSNOC_PCNOC_1		27
+#define MASTER_NSSNOC_QOSGEN_REF	28
+#define SLAVE_NSSNOC_QOSGEN_REF		29
+#define MASTER_NSSNOC_TIMEOUT_REF	30
+#define SLAVE_NSSNOC_TIMEOUT_REF	31
+#define MASTER_NSSNOC_XO_DCD		32
+#define SLAVE_NSSNOC_XO_DCD		33
+#define MASTER_NSSNOC_ATB		34
+#define SLAVE_NSSNOC_ATB		35
+#define MASTER_MEM_NOC_NSSNOC		36
+#define SLAVE_MEM_NOC_NSSNOC		37
+#define MASTER_NSSNOC_MEMNOC		38
+#define SLAVE_NSSNOC_MEMNOC		39
+#define MASTER_NSSNOC_MEM_NOC_1		40
+#define SLAVE_NSSNOC_MEM_NOC_1		41
+
+#define MASTER_NSSNOC_PPE		0
+#define SLAVE_NSSNOC_PPE		1
+#define MASTER_NSSNOC_PPE_CFG		2
+#define SLAVE_NSSNOC_PPE_CFG		3
+#define MASTER_NSSNOC_NSS_CSR		4
+#define SLAVE_NSSNOC_NSS_CSR		5
+#define MASTER_NSSNOC_IMEM_QSB		6
+#define SLAVE_NSSNOC_IMEM_QSB		7
+#define MASTER_NSSNOC_IMEM_AHB		8
+#define SLAVE_NSSNOC_IMEM_AHB		9
+
+#endif /* INTERCONNECT_QCOM_IPQ9574_H */
diff --git a/dts/upstream/include/dt-bindings/interconnect/qcom,msm8953.h b/dts/upstream/include/dt-bindings/interconnect/qcom,msm8953.h
new file mode 100644
index 00000000000..12564c434af
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/interconnect/qcom,msm8953.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Qualcomm MSM8953 interconnect IDs
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8953_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8953_H
+
+/* BIMC fabric */
+#define MAS_APPS_PROC		0
+#define MAS_OXILI		1
+#define MAS_SNOC_BIMC_0		2
+#define MAS_SNOC_BIMC_2		3
+#define MAS_SNOC_BIMC_1		4
+#define MAS_TCU_0		5
+#define SLV_EBI			6
+#define SLV_BIMC_SNOC		7
+
+/* PCNOC fabric */
+#define MAS_SPDM		0
+#define MAS_BLSP_1		1
+#define MAS_BLSP_2		2
+#define MAS_USB3		3
+#define MAS_CRYPTO		4
+#define MAS_SDCC_1		5
+#define MAS_SDCC_2		6
+#define MAS_SNOC_PCNOC		7
+#define PCNOC_M_0		8
+#define PCNOC_M_1		9
+#define PCNOC_INT_1		10
+#define PCNOC_INT_2		11
+#define PCNOC_S_0		12
+#define PCNOC_S_1		13
+#define PCNOC_S_2		14
+#define PCNOC_S_3		15
+#define PCNOC_S_4		16
+#define PCNOC_S_6		17
+#define PCNOC_S_7		18
+#define PCNOC_S_8		19
+#define PCNOC_S_9		20
+#define SLV_SPDM		21
+#define SLV_PDM			22
+#define SLV_TCSR		23
+#define SLV_SNOC_CFG		24
+#define SLV_TLMM		25
+#define SLV_MESSAGE_RAM		26
+#define SLV_BLSP_1		27
+#define SLV_BLSP_2		28
+#define SLV_PRNG		29
+#define SLV_CAMERA_SS_CFG	30
+#define SLV_DISP_SS_CFG		31
+#define SLV_VENUS_CFG		32
+#define SLV_GPU_CFG		33
+#define SLV_SDCC_1		34
+#define SLV_SDCC_2		35
+#define SLV_CRYPTO_0_CFG	36
+#define SLV_PMIC_ARB		37
+#define SLV_USB3		38
+#define SLV_IPA_CFG		39
+#define SLV_TCU			40
+#define SLV_PCNOC_SNOC		41
+
+/* SNOC fabric */
+#define MAS_QDSS_BAM		0
+#define MAS_BIMC_SNOC		1
+#define MAS_PCNOC_SNOC		2
+#define MAS_IPA			3
+#define MAS_QDSS_ETR		4
+#define QDSS_INT		5
+#define SNOC_INT_0		6
+#define SNOC_INT_1		7
+#define SNOC_INT_2		8
+#define SLV_KPSS_AHB		9
+#define SLV_WCSS		10
+#define SLV_SNOC_BIMC_1		11
+#define SLV_IMEM		12
+#define SLV_SNOC_PCNOC		13
+#define SLV_QDSS_STM		14
+#define SLV_CATS_1		15
+#define SLV_LPASS		16
+
+/* SNOC-MM fabric */
+#define MAS_JPEG		0
+#define MAS_MDP			1
+#define MAS_VENUS		2
+#define MAS_VFE0		3
+#define MAS_VFE1		4
+#define MAS_CPP			5
+#define SLV_SNOC_BIMC_0		6
+#define SLV_SNOC_BIMC_2		7
+#define SLV_CATS_0		8
+
+#endif /* __DT_BINDINGS_INTERCONNECT_QCOM_MSM8953_H */
diff --git a/dts/upstream/include/dt-bindings/mfd/qcom-pm8008.h b/dts/upstream/include/dt-bindings/mfd/qcom-pm8008.h
deleted file mode 100644
index eca9448df22..00000000000
--- a/dts/upstream/include/dt-bindings/mfd/qcom-pm8008.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2021 The Linux Foundation. All rights reserved.
- */
-
-#ifndef __DT_BINDINGS_MFD_QCOM_PM8008_H
-#define __DT_BINDINGS_MFD_QCOM_PM8008_H
-
-/* PM8008 IRQ numbers */
-#define PM8008_IRQ_MISC_UVLO	0
-#define PM8008_IRQ_MISC_OVLO	1
-#define PM8008_IRQ_MISC_OTST2	2
-#define PM8008_IRQ_MISC_OTST3	3
-#define PM8008_IRQ_MISC_LDO_OCP	4
-#define PM8008_IRQ_TEMP_ALARM	5
-#define PM8008_IRQ_GPIO1	6
-#define PM8008_IRQ_GPIO2	7
-
-#endif
diff --git a/dts/upstream/include/dt-bindings/mfd/st,stpmic1.h b/dts/upstream/include/dt-bindings/mfd/st,stpmic1.h
index 321cd08797d..9dd15b9c743 100644
--- a/dts/upstream/include/dt-bindings/mfd/st,stpmic1.h
+++ b/dts/upstream/include/dt-bindings/mfd/st,stpmic1.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
 /*
  * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
  * Author: Philippe Peurichard <philippe.peurichard@st.com>,
diff --git a/dts/upstream/include/dt-bindings/power/amlogic,a4-pwrc.h b/dts/upstream/include/dt-bindings/power/amlogic,a4-pwrc.h
new file mode 100644
index 00000000000..bd2f9c558d2
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/power/amlogic,a4-pwrc.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (C) 2024 Amlogic, Inc. All rights reserved
+ */
+#ifndef _DT_BINDINGS_AMLOGIC_A4_POWER_H
+#define _DT_BINDINGS_AMLOGIC_A4_POWER_H
+
+#define PWRC_A4_AUDIO_ID				0
+#define PWRC_A4_SDIOA_ID				1
+#define PWRC_A4_EMMC_ID					2
+#define PWRC_A4_USB_COMB_ID				3
+#define PWRC_A4_ETH_ID					4
+#define PWRC_A4_VOUT_ID					5
+#define PWRC_A4_AUDIO_PDM_ID				6
+#define PWRC_A4_DMC_ID					7
+#define PWRC_A4_SYS_WRAP_ID				8
+#define PWRC_A4_AO_I2C_S_ID				9
+#define PWRC_A4_AO_UART_ID				10
+#define PWRC_A4_AO_IR_ID				11
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/power/amlogic,a5-pwrc.h b/dts/upstream/include/dt-bindings/power/amlogic,a5-pwrc.h
new file mode 100644
index 00000000000..3a6f53eb959
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/power/amlogic,a5-pwrc.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (C) 2024 Amlogic, Inc. All rights reserved
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_A5_POWER_H
+#define _DT_BINDINGS_AMLOGIC_A5_POWER_H
+
+#define PWRC_A5_NNA_ID			0
+#define PWRC_A5_AUDIO_ID		1
+#define PWRC_A5_SDIOA_ID		2
+#define PWRC_A5_EMMC_ID			3
+#define PWRC_A5_USB_COMB_ID		4
+#define PWRC_A5_ETH_ID			5
+#define PWRC_A5_RSA_ID			6
+#define PWRC_A5_AUDIO_PDM_ID		7
+#define PWRC_A5_DMC_ID			8
+#define PWRC_A5_SYS_WRAP_ID		9
+#define PWRC_A5_DSPA_ID			10
+
+#endif
diff --git a/dts/upstream/include/dt-bindings/regulator/st,stm32mp25-regulator.h b/dts/upstream/include/dt-bindings/regulator/st,stm32mp25-regulator.h
new file mode 100644
index 00000000000..3c3d30911dd
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/regulator/st,stm32mp25-regulator.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2024, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef __DT_BINDINGS_REGULATOR_ST_STM32MP25_REGULATOR_H
+#define __DT_BINDINGS_REGULATOR_ST_STM32MP25_REGULATOR_H
+
+/* SCMI voltage domains identifiers */
+
+/* SOC Internal regulators */
+#define VOLTD_SCMI_VDDIO1		0
+#define VOLTD_SCMI_VDDIO2		1
+#define VOLTD_SCMI_VDDIO3		2
+#define VOLTD_SCMI_VDDIO4		3
+#define VOLTD_SCMI_VDDIO		4
+#define VOLTD_SCMI_UCPD			5
+#define VOLTD_SCMI_USB33		6
+#define VOLTD_SCMI_ADC			7
+#define VOLTD_SCMI_GPU			8
+#define VOLTD_SCMI_VREFBUF		9
+
+/* STPMIC2 regulators */
+#define VOLTD_SCMI_STPMIC2_BUCK1	10
+#define VOLTD_SCMI_STPMIC2_BUCK2	11
+#define VOLTD_SCMI_STPMIC2_BUCK3	12
+#define VOLTD_SCMI_STPMIC2_BUCK4	13
+#define VOLTD_SCMI_STPMIC2_BUCK5	14
+#define VOLTD_SCMI_STPMIC2_BUCK6	15
+#define VOLTD_SCMI_STPMIC2_BUCK7	16
+#define VOLTD_SCMI_STPMIC2_LDO1		17
+#define VOLTD_SCMI_STPMIC2_LDO2		18
+#define VOLTD_SCMI_STPMIC2_LDO3		19
+#define VOLTD_SCMI_STPMIC2_LDO4		20
+#define VOLTD_SCMI_STPMIC2_LDO5		21
+#define VOLTD_SCMI_STPMIC2_LDO6		22
+#define VOLTD_SCMI_STPMIC2_LDO7		23
+#define VOLTD_SCMI_STPMIC2_LDO8		24
+#define VOLTD_SCMI_STPMIC2_REFDDR	25
+
+/* External regulators */
+#define VOLTD_SCMI_REGU0		26
+#define VOLTD_SCMI_REGU1		27
+#define VOLTD_SCMI_REGU2		28
+#define VOLTD_SCMI_REGU3		29
+#define VOLTD_SCMI_REGU4		30
+
+#endif /*__DT_BINDINGS_REGULATOR_ST_STM32MP25_REGULATOR_H */
diff --git a/dts/upstream/include/dt-bindings/reset/airoha,en7581-reset.h b/dts/upstream/include/dt-bindings/reset/airoha,en7581-reset.h
new file mode 100644
index 00000000000..6544a1790b8
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/reset/airoha,en7581-reset.h
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 AIROHA Inc
+ * Author: Lorenzo Bianconi <lorenzo@kernel.org>
+ */
+
+#ifndef __DT_BINDINGS_RESET_CONTROLLER_AIROHA_EN7581_H_
+#define __DT_BINDINGS_RESET_CONTROLLER_AIROHA_EN7581_H_
+
+/* RST_CTRL2 */
+#define EN7581_XPON_PHY_RST		 0
+#define EN7581_CPU_TIMER2_RST		 1
+#define EN7581_HSUART_RST		 2
+#define EN7581_UART4_RST		 3
+#define EN7581_UART5_RST		 4
+#define EN7581_I2C2_RST			 5
+#define EN7581_XSI_MAC_RST		 6
+#define EN7581_XSI_PHY_RST		 7
+#define EN7581_NPU_RST			 8
+#define EN7581_I2S_RST			 9
+#define EN7581_TRNG_RST			10
+#define EN7581_TRNG_MSTART_RST		11
+#define EN7581_DUAL_HSI0_RST		12
+#define EN7581_DUAL_HSI1_RST		13
+#define EN7581_HSI_RST			14
+#define EN7581_DUAL_HSI0_MAC_RST	15
+#define EN7581_DUAL_HSI1_MAC_RST	16
+#define EN7581_HSI_MAC_RST		17
+#define EN7581_WDMA_RST			18
+#define EN7581_WOE0_RST			19
+#define EN7581_WOE1_RST			20
+#define EN7581_HSDMA_RST		21
+#define EN7581_TDMA_RST			22
+#define EN7581_EMMC_RST			23
+#define EN7581_SOE_RST			24
+#define EN7581_PCIE2_RST		25
+#define EN7581_XFP_MAC_RST		26
+#define EN7581_USB_HOST_P1_RST		27
+#define EN7581_USB_HOST_P1_U3_PHY_RST	28
+/* RST_CTRL1 */
+#define EN7581_PCM1_ZSI_ISI_RST		29
+#define EN7581_FE_PDMA_RST		30
+#define EN7581_FE_QDMA_RST		31
+#define EN7581_PCM_SPIWP_RST		32
+#define EN7581_CRYPTO_RST		33
+#define EN7581_TIMER_RST		34
+#define EN7581_PCM1_RST			35
+#define EN7581_UART_RST			36
+#define EN7581_GPIO_RST			37
+#define EN7581_GDMA_RST			38
+#define EN7581_I2C_MASTER_RST		39
+#define EN7581_PCM2_ZSI_ISI_RST		40
+#define EN7581_SFC_RST			41
+#define EN7581_UART2_RST		42
+#define EN7581_GDMP_RST			43
+#define EN7581_FE_RST			44
+#define EN7581_USB_HOST_P0_RST		45
+#define EN7581_GSW_RST			46
+#define EN7581_SFC2_PCM_RST		47
+#define EN7581_PCIE0_RST		48
+#define EN7581_PCIE1_RST		49
+#define EN7581_CPU_TIMER_RST		50
+#define EN7581_PCIE_HB_RST		51
+#define EN7581_XPON_MAC_RST		52
+
+#endif /* __DT_BINDINGS_RESET_CONTROLLER_AIROHA_EN7581_H_ */
diff --git a/dts/upstream/include/dt-bindings/reset/qcom,qca8k-nsscc.h b/dts/upstream/include/dt-bindings/reset/qcom,qca8k-nsscc.h
new file mode 100644
index 00000000000..c71167a3bd4
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/reset/qcom,qca8k-nsscc.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_RESET_QCOM_QCA8K_NSS_CC_H
+#define _DT_BINDINGS_RESET_QCOM_QCA8K_NSS_CC_H
+
+#define NSS_CC_SWITCH_CORE_ARES				1
+#define NSS_CC_APB_BRIDGE_ARES				2
+#define NSS_CC_MAC0_TX_ARES				3
+#define NSS_CC_MAC0_TX_SRDS1_ARES			4
+#define NSS_CC_MAC0_RX_ARES				5
+#define NSS_CC_MAC0_RX_SRDS1_ARES			6
+#define NSS_CC_MAC1_SRDS1_CH0_RX_ARES			7
+#define NSS_CC_MAC1_TX_ARES				8
+#define NSS_CC_MAC1_GEPHY0_TX_ARES			9
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_RX_ARES		10
+#define NSS_CC_MAC1_SRDS1_CH0_TX_ARES			11
+#define NSS_CC_MAC1_RX_ARES				12
+#define NSS_CC_MAC1_GEPHY0_RX_ARES			13
+#define NSS_CC_MAC1_SRDS1_CH0_XGMII_TX_ARES		14
+#define NSS_CC_MAC2_SRDS1_CH1_RX_ARES			15
+#define NSS_CC_MAC2_TX_ARES				16
+#define NSS_CC_MAC2_GEPHY1_TX_ARES			17
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_RX_ARES		18
+#define NSS_CC_MAC2_SRDS1_CH1_TX_ARES			19
+#define NSS_CC_MAC2_RX_ARES				20
+#define NSS_CC_MAC2_GEPHY1_RX_ARES			21
+#define NSS_CC_MAC2_SRDS1_CH1_XGMII_TX_ARES		22
+#define NSS_CC_MAC3_SRDS1_CH2_RX_ARES			23
+#define NSS_CC_MAC3_TX_ARES				24
+#define NSS_CC_MAC3_GEPHY2_TX_ARES			25
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_RX_ARES		26
+#define NSS_CC_MAC3_SRDS1_CH2_TX_ARES			27
+#define NSS_CC_MAC3_RX_ARES				28
+#define NSS_CC_MAC3_GEPHY2_RX_ARES			29
+#define NSS_CC_MAC3_SRDS1_CH2_XGMII_TX_ARES		30
+#define NSS_CC_MAC4_SRDS1_CH3_RX_ARES			31
+#define NSS_CC_MAC4_TX_ARES				32
+#define NSS_CC_MAC4_GEPHY3_TX_ARES			33
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_RX_ARES		34
+#define NSS_CC_MAC4_SRDS1_CH3_TX_ARES			35
+#define NSS_CC_MAC4_RX_ARES				36
+#define NSS_CC_MAC4_GEPHY3_RX_ARES			37
+#define NSS_CC_MAC4_SRDS1_CH3_XGMII_TX_ARES		38
+#define NSS_CC_MAC5_TX_ARES				39
+#define NSS_CC_MAC5_TX_SRDS0_ARES			40
+#define NSS_CC_MAC5_RX_ARES				41
+#define NSS_CC_MAC5_RX_SRDS0_ARES			42
+#define NSS_CC_AHB_ARES					43
+#define NSS_CC_SEC_CTRL_AHB_ARES			44
+#define NSS_CC_TLMM_ARES				45
+#define NSS_CC_TLMM_AHB_ARES				46
+#define NSS_CC_CNOC_AHB_ARES				47
+#define NSS_CC_MDIO_AHB_ARES				48
+#define NSS_CC_MDIO_MASTER_AHB_ARES			49
+#define NSS_CC_SRDS0_SYS_ARES				50
+#define NSS_CC_SRDS1_SYS_ARES				51
+#define NSS_CC_GEPHY0_SYS_ARES				52
+#define NSS_CC_GEPHY1_SYS_ARES				53
+#define NSS_CC_GEPHY2_SYS_ARES				54
+#define NSS_CC_GEPHY3_SYS_ARES				55
+#define NSS_CC_SEC_CTRL_ARES				56
+#define NSS_CC_SEC_CTRL_SENSE_ARES			57
+#define NSS_CC_SLEEP_ARES				58
+#define NSS_CC_DEBUG_ARES				59
+#define NSS_CC_GEPHY0_ARES				60
+#define NSS_CC_GEPHY1_ARES				61
+#define NSS_CC_GEPHY2_ARES				62
+#define NSS_CC_GEPHY3_ARES				63
+#define NSS_CC_DSP_ARES					64
+#define NSS_CC_GEPHY_FULL_ARES				65
+#define NSS_CC_GLOBAL_ARES				66
+#define NSS_CC_XPCS_ARES				67
+#endif
diff --git a/dts/upstream/include/dt-bindings/reset/sun50i-h616-ccu.h b/dts/upstream/include/dt-bindings/reset/sun50i-h616-ccu.h
index 1bd8bb0a11b..ed177c04afd 100644
--- a/dts/upstream/include/dt-bindings/reset/sun50i-h616-ccu.h
+++ b/dts/upstream/include/dt-bindings/reset/sun50i-h616-ccu.h
@@ -66,5 +66,6 @@
 #define RST_BUS_TVE0		57
 #define RST_BUS_HDCP		58
 #define RST_BUS_KEYADC		59
+#define RST_BUS_GPADC		60
 
 #endif /* _DT_BINDINGS_RESET_SUN50I_H616_H_ */
diff --git a/dts/upstream/include/dt-bindings/sound/audio-graph.h b/dts/upstream/include/dt-bindings/sound/audio-graph.h
new file mode 100644
index 00000000000..bdb70c6b733
--- /dev/null
+++ b/dts/upstream/include/dt-bindings/sound/audio-graph.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * audio-graph.h
+ *
+ * Copyright (c) 2024 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ */
+#ifndef __AUDIO_GRAPH_H
+#define __AUDIO_GRAPH_H
+
+/*
+ * used in
+ *	link-trigger-order
+ *	link-trigger-order-start
+ *	link-trigger-order-stop
+ *
+ * default is
+ *	link-trigger-order = <SND_SOC_TRIGGER_LINK
+ *			      SND_SOC_TRIGGER_COMPONENT
+ *			      SND_SOC_TRIGGER_DAI>;
+ */
+#define SND_SOC_TRIGGER_LINK		0
+#define SND_SOC_TRIGGER_COMPONENT	1
+#define SND_SOC_TRIGGER_DAI		2
+#define SND_SOC_TRIGGER_SIZE		3	/* shoud be last */
+
+#endif /* __AUDIO_GRAPH_H */
diff --git a/dts/upstream/include/dt-bindings/thermal/mediatek,lvts-thermal.h b/dts/upstream/include/dt-bindings/thermal/mediatek,lvts-thermal.h
index bf95309d252..ddc7302a510 100644
--- a/dts/upstream/include/dt-bindings/thermal/mediatek,lvts-thermal.h
+++ b/dts/upstream/include/dt-bindings/thermal/mediatek,lvts-thermal.h
@@ -24,7 +24,7 @@
 #define MT8186_BIG_CPU1	5
 #define MT8186_NNA		6
 #define MT8186_ADSP		7
-#define MT8186_MFG		8
+#define MT8186_GPU		8
 
 #define MT8188_MCU_LITTLE_CPU0	0
 #define MT8188_MCU_LITTLE_CPU1	1
@@ -34,11 +34,11 @@
 #define MT8188_MCU_BIG_CPU1	5
 
 #define MT8188_AP_APU		0
-#define MT8188_AP_GPU1		1
-#define MT8188_AP_GPU2		2
-#define MT8188_AP_SOC1		3
-#define MT8188_AP_SOC2		4
-#define MT8188_AP_SOC3		5
+#define MT8188_AP_GPU0		1
+#define MT8188_AP_GPU1		2
+#define MT8188_AP_ADSP		3
+#define MT8188_AP_VDO		4
+#define MT8188_AP_INFRA		5
 #define MT8188_AP_CAM1		6
 #define MT8188_AP_CAM2		7
 
diff --git a/dts/upstream/src/arm/arm/arm-realview-eb-bbrevd.dtsi b/dts/upstream/src/arm/arm/arm-realview-eb-bbrevd.dtsi
index a79e1d1d30a..7f62aef9ca8 100644
--- a/dts/upstream/src/arm/arm/arm-realview-eb-bbrevd.dtsi
+++ b/dts/upstream/src/arm/arm/arm-realview-eb-bbrevd.dtsi
@@ -22,7 +22,7 @@
 
 / {
 	/* Introduce a fixed regulator for the new ethernet controller */
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;
diff --git a/dts/upstream/src/arm/arm/arm-realview-eb.dtsi b/dts/upstream/src/arm/arm/arm-realview-eb.dtsi
index fbb2258b451..16f784da5a5 100644
--- a/dts/upstream/src/arm/arm/arm-realview-eb.dtsi
+++ b/dts/upstream/src/arm/arm/arm-realview-eb.dtsi
@@ -45,7 +45,7 @@
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -53,13 +53,13 @@
 		regulator-boot-on;
         };
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -67,48 +67,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
diff --git a/dts/upstream/src/arm/arm/arm-realview-pb1176.dts b/dts/upstream/src/arm/arm/arm-realview-pb1176.dts
index d99bac02232..b9b10cbd65a 100644
--- a/dts/upstream/src/arm/arm/arm-realview-pb1176.dts
+++ b/dts/upstream/src/arm/arm/arm-realview-pb1176.dts
@@ -63,13 +63,13 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -77,40 +77,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
diff --git a/dts/upstream/src/arm/arm/arm-realview-pb11mp.dts b/dts/upstream/src/arm/arm/arm-realview-pb11mp.dts
index 89103d54ecc..ce35748f3d2 100644
--- a/dts/upstream/src/arm/arm/arm-realview-pb11mp.dts
+++ b/dts/upstream/src/arm/arm/arm-realview-pb11mp.dts
@@ -163,19 +163,19 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -183,48 +183,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
diff --git a/dts/upstream/src/arm/arm/arm-realview-pbx.dtsi b/dts/upstream/src/arm/arm/arm-realview-pbx.dtsi
index ec1507c5147..e625403a945 100644
--- a/dts/upstream/src/arm/arm/arm-realview-pbx.dtsi
+++ b/dts/upstream/src/arm/arm/arm-realview-pbx.dtsi
@@ -62,19 +62,19 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -82,48 +82,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
diff --git a/dts/upstream/src/arm/arm/integratorap-im-pd1.dts b/dts/upstream/src/arm/arm/integratorap-im-pd1.dts
index 367850ea091..db13e09f2fa 100644
--- a/dts/upstream/src/arm/arm/integratorap-im-pd1.dts
+++ b/dts/upstream/src/arm/arm/integratorap-im-pd1.dts
@@ -54,7 +54,7 @@
 	};
 
 	/* Also used for the Smart Card Interface SCI */
-	impd1_uartclk: clock@1_4 {
+	impd1_uartclk: clock-uart {
 		compatible = "fixed-factor-clock";
 		#clock-cells = <0>;
 		clock-div = <4>;
@@ -64,7 +64,7 @@
 	};
 
 	/* For the SSP the clock is divided by 64 */
-	impd1_sspclk: clock@1_64 {
+	impd1_sspclk: clock-ssp {
 		compatible = "fixed-factor-clock";
 		#clock-cells = <0>;
 		clock-div = <64>;
diff --git a/dts/upstream/src/arm/arm/integratorap.dts b/dts/upstream/src/arm/arm/integratorap.dts
index d9927d3181d..9b6a1dbaf26 100644
--- a/dts/upstream/src/arm/arm/integratorap.dts
+++ b/dts/upstream/src/arm/arm/integratorap.dts
@@ -57,22 +57,14 @@
 	};
 
 	/* 24 MHz chrystal on the Integrator/AP development board */
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: pclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* The UART clock is 14.74 MHz divided by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
@@ -81,7 +73,7 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
diff --git a/dts/upstream/src/arm/arm/integratorcp.dts b/dts/upstream/src/arm/arm/integratorcp.dts
index c011333eb16..8ad1a8957ac 100644
--- a/dts/upstream/src/arm/arm/integratorcp.dts
+++ b/dts/upstream/src/arm/arm/integratorcp.dts
@@ -47,14 +47,14 @@
 	 */
 
 	/* The codec chrystal operates at 24.576 MHz */
-	xtal_codec: xtal24.576@24.576M {
+	xtal_codec: clock-24576000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24576000>;
 	};
 
 	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
-	aaci_bitclk: aaci_bitclk@12.288M {
+	aaci_bitclk: clock-12288000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <2>;
@@ -63,21 +63,21 @@
 	};
 
 	/* This is a 25MHz chrystal on the base board */
-	xtal25mhz: xtal25mhz@25M {
+	xtal25mhz: clock-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <25000000>;
 	};
 
 	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
 	};
 
 	/* Actually sysclk I think */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -85,7 +85,7 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -131,7 +131,7 @@
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
diff --git a/dts/upstream/src/arm/arm/mps2.dtsi b/dts/upstream/src/arm/arm/mps2.dtsi
index ce308820765..e240bc8aa60 100644
--- a/dts/upstream/src/arm/arm/mps2.dtsi
+++ b/dts/upstream/src/arm/arm/mps2.dtsi
@@ -48,37 +48,37 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	oscclk0: clk-osc0 {
+	oscclk0: clock-50000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 	};
 
-	oscclk1: clk-osc1 {
+	oscclk1: clock-24576000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24576000>;
 	};
 
-	oscclk2: clk-osc2 {
+	oscclk2: clock-25000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	cfgclk: clk-cfg {
+	cfgclk: clock-5000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <5000000>;
 	};
 
-	spicfgclk: clk-spicfg {
+	spicfgclk: clock-75000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <75000000>;
 	};
 
-	sysclk: clk-sys {
+	sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk0>;
 		#clock-cells = <0>;
@@ -86,7 +86,7 @@
 		clock-mult = <1>;
 	};
 
-	audmclk: clk-audm {
+	audmclk: clk-12388000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
@@ -94,7 +94,7 @@
 		clock-mult = <1>;
 	};
 
-	audsclk: clk-auds {
+	audsclk: clk-3072000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
@@ -102,38 +102,6 @@
 		clock-mult = <1>;
 	};
 
-	spiclcd: clk-cpiclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	spicon: clk-spicon {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2cclcd: clk-i2cclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2caud: clk-i2caud {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
 	soc {
 		compatible = "simple-bus";
 		ranges;
diff --git a/dts/upstream/src/arm/arm/versatile-ab.dts b/dts/upstream/src/arm/arm/versatile-ab.dts
index de45aa99e26..635ab926889 100644
--- a/dts/upstream/src/arm/arm/versatile-ab.dts
+++ b/dts/upstream/src/arm/arm/versatile-ab.dts
@@ -24,7 +24,7 @@
 		reg = <0x0 0x08000000>;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
@@ -142,14 +142,14 @@
 		};
 
 		/* OSC1 on AB, OSC4 on PB */
-		osc1: cm_aux_osc@24M {
+		osc1: clock-osc {
 			#clock-cells = <0>;
 			compatible = "arm,versatile-cm-auxosc";
 			clocks = <&xtal24mhz>;
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
@@ -157,7 +157,7 @@
 			clocks = <&xtal24mhz>;
 		};
 
-		pclk: pclk@24M {
+		pclk: clock-pclk {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <1>;
diff --git a/dts/upstream/src/arm/arm/vexpress-v2m-rs1.dtsi b/dts/upstream/src/arm/arm/vexpress-v2m-rs1.dtsi
index 8af4b77fe65..158b3923eae 100644
--- a/dts/upstream/src/arm/arm/vexpress-v2m-rs1.dtsi
+++ b/dts/upstream/src/arm/arm/vexpress-v2m-rs1.dtsi
@@ -20,7 +20,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
-	v2m_fixed_3v3: fixed-regulator-0 {
+	v2m_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
 		regulator-min-microvolt = <3300000>;
@@ -28,21 +28,21 @@
 		regulator-always-on;
 	};
 
-	v2m_clk24mhz: clk24mhz {
+	v2m_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "v2m:clk24mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "v2m:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
diff --git a/dts/upstream/src/arm/arm/vexpress-v2m.dtsi b/dts/upstream/src/arm/arm/vexpress-v2m.dtsi
index c5e92f6d2fc..be03f2a8a57 100644
--- a/dts/upstream/src/arm/arm/vexpress-v2m.dtsi
+++ b/dts/upstream/src/arm/arm/vexpress-v2m.dtsi
@@ -351,7 +351,7 @@
 				};
 			};
 
-			v2m_fixed_3v3: fixed-regulator-0 {
+			v2m_fixed_3v3: regulator-3v3 {
 				compatible = "regulator-fixed";
 				regulator-name = "3V3";
 				regulator-min-microvolt = <3300000>;
@@ -359,21 +359,21 @@
 				regulator-always-on;
 			};
 
-			v2m_clk24mhz: clk24mhz {
+			v2m_clk24mhz: clock-24000000 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <24000000>;
 				clock-output-names = "v2m:clk24mhz";
 			};
 
-			v2m_refclk1mhz: refclk1mhz {
+			v2m_refclk1mhz: clock-1000000 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <1000000>;
 				clock-output-names = "v2m:refclk1mhz";
 			};
 
-			v2m_refclk32khz: refclk32khz {
+			v2m_refclk32khz: clock-32768 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <32768>;
@@ -436,7 +436,7 @@
 				compatible = "arm,vexpress,config-bus";
 				arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-				oscclk0 {
+				clock-controller-0 {
 					/* MCC static memory clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 0>;
@@ -445,7 +445,7 @@
 					clock-output-names = "v2m:oscclk0";
 				};
 
-				v2m_oscclk1: oscclk1 {
+				v2m_oscclk1: clock-controller-1 {
 					/* CLCD clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 1>;
@@ -454,7 +454,7 @@
 					clock-output-names = "v2m:oscclk1";
 				};
 
-				v2m_oscclk2: oscclk2 {
+				v2m_oscclk2: clock-controller-2 {
 					/* IO FPGA peripheral clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 2>;
@@ -463,7 +463,7 @@
 					clock-output-names = "v2m:oscclk2";
 				};
 
-				volt-vio {
+				regulator-vio {
 					/* Logic level voltage */
 					compatible = "arm,vexpress-volt";
 					arm,vexpress-sysreg,func = <2 0>;
diff --git a/dts/upstream/src/arm/arm/vexpress-v2p-ca15-tc1.dts b/dts/upstream/src/arm/arm/vexpress-v2p-ca15-tc1.dts
index 679537e17ff..5a91e936ede 100644
--- a/dts/upstream/src/arm/arm/vexpress-v2p-ca15-tc1.dts
+++ b/dts/upstream/src/arm/arm/vexpress-v2p-ca15-tc1.dts
@@ -142,7 +142,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* CPU PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -151,7 +151,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -160,7 +160,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -169,7 +169,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -178,7 +178,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		sys_pll: oscclk7 {
+		sys_pll: clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -187,7 +187,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -196,7 +196,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt-cores {
+		regulator-cores {
 			/* CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
diff --git a/dts/upstream/src/arm/arm/vexpress-v2p-ca15_a7.dts b/dts/upstream/src/arm/arm/vexpress-v2p-ca15_a7.dts
index 511e87cc2bc..6ef23c53d2d 100644
--- a/dts/upstream/src/arm/arm/vexpress-v2p-ca15_a7.dts
+++ b/dts/upstream/src/arm/arm/vexpress-v2p-ca15_a7.dts
@@ -253,7 +253,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* A15 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -262,7 +262,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk1 {
+		clock-controller-1 {
 			/* A15 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -271,7 +271,7 @@
 			clock-output-names = "oscclk1";
 		};
 
-		oscclk2 {
+		clock-controller-2 {
 			/* A7 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -280,7 +280,7 @@
 			clock-output-names = "oscclk2";
 		};
 
-		oscclk3 {
+		clock-controller-3 {
 			/* A7 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
@@ -289,7 +289,7 @@
 			clock-output-names = "oscclk3";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* External AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -298,7 +298,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -307,7 +307,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* Static memory controller clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -316,7 +316,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		oscclk7 {
+		clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -325,7 +325,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -334,7 +334,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt-a15 {
+		regulator-a15 {
 			/* A15 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -345,7 +345,7 @@
 			label = "A15 Vcore";
 		};
 
-		volt-a7 {
+		regulator-a7 {
 			/* A7 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
diff --git a/dts/upstream/src/arm/arm/vexpress-v2p-ca5s.dts b/dts/upstream/src/arm/arm/vexpress-v2p-ca5s.dts
index ff1f9a1bcfc..e3896253f33 100644
--- a/dts/upstream/src/arm/arm/vexpress-v2p-ca5s.dts
+++ b/dts/upstream/src/arm/arm/vexpress-v2p-ca5s.dts
@@ -145,7 +145,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		cpu_clk: oscclk0 {
+		cpu_clk: clock-controller-0 {
 			/* CPU and internal AXI reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -154,7 +154,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		axi_clk: oscclk1 {
+		axi_clk: clock-controller-1 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -163,7 +163,7 @@
 			clock-output-names = "oscclk1";
 		};
 
-		oscclk2 {
+		clock-controller-2 {
 			/* DDR2 */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -172,7 +172,7 @@
 			clock-output-names = "oscclk2";
 		};
 
-		hdlcd_clk: oscclk3 {
+		hdlcd_clk: clock-controller-3 {
 			/* HDLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
@@ -181,7 +181,7 @@
 			clock-output-names = "oscclk3";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* Test chip gate configuration */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -190,7 +190,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		smbclk: oscclk5 {
+		smbclk: clock-controller-5 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
diff --git a/dts/upstream/src/arm/arm/vexpress-v2p-ca9.dts b/dts/upstream/src/arm/arm/vexpress-v2p-ca9.dts
index 8bf35666412..43a5a4ab6ff 100644
--- a/dts/upstream/src/arm/arm/vexpress-v2p-ca9.dts
+++ b/dts/upstream/src/arm/arm/vexpress-v2p-ca9.dts
@@ -187,7 +187,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0: extsaxiclk {
+		oscclk0: clock-controller-0 {
 			/* ACLK clock to the AXI master port on the test chip */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -196,7 +196,7 @@
 			clock-output-names = "extsaxiclk";
 		};
 
-		oscclk1: clcdclk {
+		oscclk1: clock-controller-1 {
 			/* Reference clock for the CLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -205,7 +205,7 @@
 			clock-output-names = "clcdclk";
 		};
 
-		smbclk: oscclk2: tcrefclk {
+		smbclk: oscclk2: clock-controller-2 {
 			/* Reference clock for the test chip internal PLLs */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -214,7 +214,7 @@
 			clock-output-names = "tcrefclk";
 		};
 
-		volt-vd10 {
+		regulator-vd10 {
 			/* Test Chip internal logic voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -223,7 +223,7 @@
 			label = "VD10";
 		};
 
-		volt-vd10-s2 {
+		regulator-vd10-s2 {
 			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
@@ -232,7 +232,7 @@
 			label = "VD10_S2";
 		};
 
-		volt-vd10-s3 {
+		regulator-vd10-s3 {
 			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 2>;
@@ -241,7 +241,7 @@
 			label = "VD10_S3";
 		};
 
-		volt-vcc1v8 {
+		regulator-vcc1v8 {
 			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 3>;
@@ -250,7 +250,7 @@
 			label = "VCC1V8";
 		};
 
-		volt-ddr2vtt {
+		regulator-ddr2vtt {
 			/* DDR2 SDRAM VTT termination voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 4>;
@@ -259,7 +259,7 @@
 			label = "DDR2VTT";
 		};
 
-		volt-vcc3v3 {
+		regulator-vcc3v3 {
 			/* Local board supply for miscellaneous logic external to the Test Chip */
 			arm,vexpress-sysreg,func = <2 5>;
 			compatible = "arm,vexpress-volt";
diff --git a/dts/upstream/src/arm/aspeed/aspeed-g4.dtsi b/dts/upstream/src/arm/aspeed/aspeed-g4.dtsi
index 857cb26ed6d..c669ec20208 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-g4.dtsi
+++ b/dts/upstream/src/arm/aspeed/aspeed-g4.dtsi
@@ -463,7 +463,7 @@
 		interrupt-controller;
 	};
 
-	i2c0: i2c-bus@40 {
+	i2c0: i2c@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -478,7 +478,7 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c1: i2c-bus@80 {
+	i2c1: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -493,7 +493,7 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c2: i2c-bus@c0 {
+	i2c2: i2c@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -509,7 +509,7 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@100 {
+	i2c3: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -525,7 +525,7 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@140 {
+	i2c4: i2c@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -541,7 +541,7 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@180 {
+	i2c5: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -557,7 +557,7 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@1c0 {
+	i2c6: i2c@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -573,7 +573,7 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@300 {
+	i2c7: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -589,7 +589,7 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@340 {
+	i2c8: i2c@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -605,7 +605,7 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@380 {
+	i2c9: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -621,7 +621,7 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@3c0 {
+	i2c10: i2c@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -637,7 +637,7 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@400 {
+	i2c11: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -653,7 +653,7 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@440 {
+	i2c12: i2c@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -669,7 +669,7 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@480 {
+	i2c13: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/dts/upstream/src/arm/aspeed/aspeed-g5.dtsi b/dts/upstream/src/arm/aspeed/aspeed-g5.dtsi
index e6f3cf3c721..6e05cbcce49 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-g5.dtsi
+++ b/dts/upstream/src/arm/aspeed/aspeed-g5.dtsi
@@ -592,7 +592,7 @@
 		interrupt-controller;
 	};
 
-	i2c0: i2c-bus@40 {
+	i2c0: i2c@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -607,7 +607,7 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c1: i2c-bus@80 {
+	i2c1: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -622,7 +622,7 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c2: i2c-bus@c0 {
+	i2c2: i2c@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -638,7 +638,7 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@100 {
+	i2c3: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -654,7 +654,7 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@140 {
+	i2c4: i2c@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -670,7 +670,7 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@180 {
+	i2c5: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -686,7 +686,7 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@1c0 {
+	i2c6: i2c@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -702,7 +702,7 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@300 {
+	i2c7: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -718,7 +718,7 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@340 {
+	i2c8: i2c@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -734,7 +734,7 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@380 {
+	i2c9: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -750,7 +750,7 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@3c0 {
+	i2c10: i2c@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -766,7 +766,7 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@400 {
+	i2c11: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -782,7 +782,7 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@440 {
+	i2c12: i2c@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -798,7 +798,7 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@480 {
+	i2c13: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/dts/upstream/src/arm/aspeed/aspeed-g6.dtsi b/dts/upstream/src/arm/aspeed/aspeed-g6.dtsi
index 7fb42115359..0c00882f111 100644
--- a/dts/upstream/src/arm/aspeed/aspeed-g6.dtsi
+++ b/dts/upstream/src/arm/aspeed/aspeed-g6.dtsi
@@ -905,7 +905,7 @@
 #include "aspeed-g6-pinctrl.dtsi"
 
 &i2c {
-	i2c0: i2c-bus@80 {
+	i2c0: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x80 0x80>;
@@ -919,7 +919,7 @@
 		status = "disabled";
 	};
 
-	i2c1: i2c-bus@100 {
+	i2c1: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x100 0x80>;
@@ -933,7 +933,7 @@
 		status = "disabled";
 	};
 
-	i2c2: i2c-bus@180 {
+	i2c2: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x180 0x80>;
@@ -947,7 +947,7 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@200 {
+	i2c3: i2c@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x200 0x80>;
@@ -961,7 +961,7 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@280 {
+	i2c4: i2c@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x280 0x80>;
@@ -975,7 +975,7 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@300 {
+	i2c5: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x300 0x80>;
@@ -989,7 +989,7 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@380 {
+	i2c6: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x380 0x80>;
@@ -1003,7 +1003,7 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@400 {
+	i2c7: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x400 0x80>;
@@ -1017,7 +1017,7 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@480 {
+	i2c8: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x480 0x80>;
@@ -1031,7 +1031,7 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@500 {
+	i2c9: i2c@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x500 0x80>;
@@ -1045,7 +1045,7 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@580 {
+	i2c10: i2c@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x580 0x80>;
@@ -1059,7 +1059,7 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@600 {
+	i2c11: i2c@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x600 0x80>;
@@ -1073,7 +1073,7 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@680 {
+	i2c12: i2c@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x680 0x80>;
@@ -1087,7 +1087,7 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@700 {
+	i2c13: i2c@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x700 0x80>;
@@ -1101,7 +1101,7 @@
 		status = "disabled";
 	};
 
-	i2c14: i2c-bus@780 {
+	i2c14: i2c@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x780 0x80>;
@@ -1115,7 +1115,7 @@
 		status = "disabled";
 	};
 
-	i2c15: i2c-bus@800 {
+	i2c15: i2c@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x800 0x80>;
diff --git a/dts/upstream/src/arm/cirrus/ep7211-edb7211.dts b/dts/upstream/src/arm/cirrus/ep7211-edb7211.dts
index 7fb532f227a..808cd5778e2 100644
--- a/dts/upstream/src/arm/cirrus/ep7211-edb7211.dts
+++ b/dts/upstream/src/arm/cirrus/ep7211-edb7211.dts
@@ -30,7 +30,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing-320x240 {
 				hactive = <320>;
 				hback-porch = <0>;
 				hfront-porch = <0>;
diff --git a/dts/upstream/src/arm/intel/ixp/intel-ixp42x-linksys-nslu2.dts b/dts/upstream/src/arm/intel/ixp/intel-ixp42x-linksys-nslu2.dts
index 2eec5f63d39..2f7c34c649e 100644
--- a/dts/upstream/src/arm/intel/ixp/intel-ixp42x-linksys-nslu2.dts
+++ b/dts/upstream/src/arm/intel/ixp/intel-ixp42x-linksys-nslu2.dts
@@ -90,11 +90,18 @@
 		timeout-ms = <5000>;
 	};
 
-	gpio-beeper {
-		compatible = "gpio-beeper";
+	gpio_pwm: pwm {
+		#pwm-cells = <3>;
+		compatible = "pwm-gpio";
 		gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 	};
 
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&gpio_pwm 0 1 0>;
+		beeper-hz = <1000>;
+	};
+
 	soc {
 		bus@c4000000 {
 			/* The first 16MB region at CS0 on the expansion bus */
diff --git a/dts/upstream/src/arm/marvell/armada-370-xp.dtsi b/dts/upstream/src/arm/marvell/armada-370-xp.dtsi
index 0b8c2a64b36..954c891e5ae 100644
--- a/dts/upstream/src/arm/marvell/armada-370-xp.dtsi
+++ b/dts/upstream/src/arm/marvell/armada-370-xp.dtsi
@@ -168,7 +168,6 @@
 			mpic: interrupt-controller@20a00 {
 				compatible = "marvell,mpic";
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 			};
diff --git a/dts/upstream/src/arm/marvell/armada-375.dtsi b/dts/upstream/src/arm/marvell/armada-375.dtsi
index ddc49547d78..99778b4b7e7 100644
--- a/dts/upstream/src/arm/marvell/armada-375.dtsi
+++ b/dts/upstream/src/arm/marvell/armada-375.dtsi
@@ -376,7 +376,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/upstream/src/arm/marvell/armada-385-atl-x530.dts b/dts/upstream/src/arm/marvell/armada-385-atl-x530.dts
index 5a9ab8410b7..2fb7304039b 100644
--- a/dts/upstream/src/arm/marvell/armada-385-atl-x530.dts
+++ b/dts/upstream/src/arm/marvell/armada-385-atl-x530.dts
@@ -43,6 +43,17 @@
 			};
 		};
 	};
+
+	led-7seg {
+		compatible = "gpio-7-segment";
+		segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 1 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 2 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 3 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 4 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 5 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 6 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &pciec {
@@ -149,7 +160,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			gpio@20 {
+			led_7seg_gpio: gpio@20 {
 				compatible = "nxp,pca9554";
 				gpio-controller;
 				#gpio-cells = <2>;
diff --git a/dts/upstream/src/arm/marvell/armada-385-turris-omnia.dts b/dts/upstream/src/arm/marvell/armada-385-turris-omnia.dts
index 7b755bb4e4e..43202890c95 100644
--- a/dts/upstream/src/arm/marvell/armada-385-turris-omnia.dts
+++ b/dts/upstream/src/arm/marvell/armada-385-turris-omnia.dts
@@ -112,6 +112,19 @@
 		status = "disabled";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		front-button {
+			label = "Front Button";
+			linux,code = <KEY_VENDOR>;
+			linux,can-disable;
+			gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>;
+			/* debouncing is done by the microcontroller */
+			debounce-interval = <0>;
+		};
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "SPDIF";
@@ -218,7 +231,22 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			/* STM32F0 command interface at address 0x2a */
+			mcu: system-controller@2a {
+				compatible = "cznic,turris-omnia-mcu";
+				reg = <0x2a>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&mcu_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <11 IRQ_TYPE_NONE>;
+
+				gpio-controller;
+				#gpio-cells = <3>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
 
 			led-controller@2b {
 				compatible = "cznic,turris-omnia-leds";
@@ -501,6 +529,11 @@
 };
 
 &pinctrl {
+	mcu_pins: mcu-pins {
+		marvell,pins = "mpp43";
+		marvell,function = "gpio";
+	};
+
 	pcawan_pins: pcawan-pins {
 		marvell,pins = "mpp46";
 		marvell,function = "gpio";
diff --git a/dts/upstream/src/arm/marvell/armada-38x.dtsi b/dts/upstream/src/arm/marvell/armada-38x.dtsi
index 446861b6b17..1181b13deab 100644
--- a/dts/upstream/src/arm/marvell/armada-38x.dtsi
+++ b/dts/upstream/src/arm/marvell/armada-38x.dtsi
@@ -408,7 +408,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/upstream/src/arm/marvell/armada-39x.dtsi b/dts/upstream/src/arm/marvell/armada-39x.dtsi
index 9d1cac49c02..6d05835efb4 100644
--- a/dts/upstream/src/arm/marvell/armada-39x.dtsi
+++ b/dts/upstream/src/arm/marvell/armada-39x.dtsi
@@ -268,7 +268,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-blackarmor-nas220.dts b/dts/upstream/src/arm/marvell/kirkwood-blackarmor-nas220.dts
index 07fbfca444d..36b90c632fd 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-blackarmor-nas220.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-blackarmor-nas220.dts
@@ -35,13 +35,13 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		button {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_SLEEP>;
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
@@ -51,7 +51,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-power {
+		led-blue-power {
 			label = "nas220:blue:power";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
diff --git a/dts/upstream/src/arm/marvell/kirkwood-c200-v1.dts b/dts/upstream/src/arm/marvell/kirkwood-c200-v1.dts
index f59ff7578df..7e3ee64d4bd 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-c200-v1.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-c200-v1.dts
@@ -29,25 +29,25 @@
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1 {
+		button-usb1 {
 			label = "USB1 Button";
 			linux,code = <BTN_0>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		button-usb2 {
 			label = "USB2 Button";
 			linux,code = <BTN_1>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-cloudbox.dts b/dts/upstream/src/arm/marvell/kirkwood-cloudbox.dts
index 448b0cd23b5..151edcd140a 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-cloudbox.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-cloudbox.dts
@@ -58,10 +58,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		key-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
@@ -71,11 +69,11 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "cloudbox:red:fail";
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
-		blue-sata {
+		led-blue-sata {
 			label = "cloudbox:blue:sata";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-d2net.dts b/dts/upstream/src/arm/marvell/kirkwood-d2net.dts
index bd3b266dd76..fcce8730d3e 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-d2net.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-d2net.dts
@@ -37,7 +37,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "d2net_v2:red:fail";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-dir665.dts b/dts/upstream/src/arm/marvell/kirkwood-dir665.dts
index 0c0851cd9be..2f6793f794c 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-dir665.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-dir665.dts
@@ -137,38 +137,38 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-usb {
+		led-blue-usb {
 			label = "dir665:blue:usb";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		blue-internet {
+		led-blue-internet {
 			/* Can only be turned on if the Internet
 			 * Ethernet port has Link
 			 */
 			label = "dir665:blue:internet";
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		amber-internet {
+		led-amber-internet {
 			label = "dir665:amber:internet";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		blue-wifi5g {
+		led-blue-wifi5g {
 			label = "dir665:blue:5g";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		};
-		blue-status {
+		led-blue-status {
 			label = "dir665:blue:status";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		blue-wps {
+		led-blue-wps {
 			label = "dir665:blue:wps";
 			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		};
-		amber-status {
+		led-amber-status {
 			label = "dir665:amber:status";
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
-		blue-24g {
+		led-blue-24g {
 			label = "dir665:blue:24g";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
@@ -176,15 +176,13 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-dns320.dts b/dts/upstream/src/arm/marvell/kirkwood-dns320.dts
index d6b0f418fd0..d8279e0c4c4 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-dns320.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-dns320.dts
@@ -24,24 +24,24 @@
 			     &pmx_led_white_usb>;
 		pinctrl-names = "default";
 
-		blue-power {
+		led-blue-power {
 			label = "dns320:blue:power";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		blue-usb {
+		led-blue-usb {
 			label = "dns320:blue:usb";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		orange-l_hdd {
+		led-orange-l_hdd {
 			label = "dns320:orange:l_hdd";
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		orange-r_hdd {
+		led-orange-r_hdd {
 			label = "dns320:orange:r_hdd";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
-		orange-usb {
+		led-orange-usb {
 			label = "dns320:orange:usb";
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-dns325.dts b/dts/upstream/src/arm/marvell/kirkwood-dns325.dts
index 94d9c06cbbf..7f396195e97 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-dns325.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-dns325.dts
@@ -24,24 +24,24 @@
 			     &pmx_led_white_usb>;
 		pinctrl-names = "default";
 
-		white-power {
+		led-white-power {
 			label = "dns325:white:power";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		white-usb {
+		led-white-usb {
 			label = "dns325:white:usb";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
 		};
-		red-l_hdd {
+		led-red-l_hdd {
 			label = "dns325:red:l_hdd";
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		red-r_hdd {
+		led-red-r_hdd {
 			label = "dns325:red:r_hdd";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
-		red-usb {
+		led-red-usb {
 			label = "dns325:red:usb";
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-dnskw.dtsi b/dts/upstream/src/arm/marvell/kirkwood-dnskw.dtsi
index 0738eb679fc..20bcd031f3f 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-dnskw.dtsi
+++ b/dts/upstream/src/arm/marvell/kirkwood-dnskw.dtsi
@@ -8,23 +8,21 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
 			     &pmx_button_reset>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 		};
-		eject {
+		button-eject {
 			label = "USB unmount button";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-dockstar.dts b/dts/upstream/src/arm/marvell/kirkwood-dockstar.dts
index 264938dfa4d..090f1e2e5bb 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-dockstar.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-dockstar.dts
@@ -42,12 +42,12 @@
 		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "status:orange:fault";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-dreamplug.dts b/dts/upstream/src/arm/marvell/kirkwood-dreamplug.dts
index 328516351e8..590bee3c561 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-dreamplug.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-dreamplug.dts
@@ -85,15 +85,15 @@
 			     &pmx_led_wifi_ap >;
 		pinctrl-names = "default";
 
-		bluetooth {
+		led-bluetooth {
 			label = "dreamplug:blue:bluetooth";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wifi {
+		led-wifi {
 			label = "dreamplug:green:wifi";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
-		wifi-ap {
+		led-wifi-ap {
 			label = "dreamplug:green:wifi_ap";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-goflexnet.dts b/dts/upstream/src/arm/marvell/kirkwood-goflexnet.dts
index d4cb3cd3e2a..d5ac4e3974d 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-goflexnet.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-goflexnet.dts
@@ -85,44 +85,44 @@
 			    >;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "status:orange:fault";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		left0 {
+		led-left0 {
 			label = "status:white:left0";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		left1 {
+		led-left1 {
 			label = "status:white:left1";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		left2 {
+		led-left2 {
 			label = "status:white:left2";
 			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
-		left3 {
+		led-left3 {
 			label = "status:white:left3";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		right0 {
+		led-right0 {
 			label = "status:white:right0";
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		};
-		right1 {
+		led-right1 {
 			label = "status:white:right1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		right2 {
+		led-right2 {
 			label = "status:white:right2";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
-		right3 {
+		led-right3 {
 			label = "status:white:right3";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-guruplug-server-plus.dts b/dts/upstream/src/arm/marvell/kirkwood-guruplug-server-plus.dts
index dfb41393941..d5aa8b505cc 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-guruplug-server-plus.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-guruplug-server-plus.dts
@@ -59,19 +59,19 @@
 			      &pmx_led_wmode_r &pmx_led_wmode_g >;
 		pinctrl-names = "default";
 
-		health-r {
+		led-health-r {
 			label = "guruplug:red:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
-		health-g {
+		led-health-g {
 			label = "guruplug:green:health";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wmode-r {
+		led-wmode-r {
 			label = "guruplug:red:wmode";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
-		wmode-g {
+		led-wmode-g {
 			label = "guruplug:green:wmode";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-ib62x0.dts b/dts/upstream/src/arm/marvell/kirkwood-ib62x0.dts
index 962a910a6f5..018c6b8f3e8 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-ib62x0.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-ib62x0.dts
@@ -58,17 +58,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
@@ -81,16 +79,16 @@
 			     &pmx_led_usb_transfer>;
 		pinctrl-names = "default";
 
-		green-os {
+		led-green-os {
 			label = "ib62x0:green:os";
 			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		red-os {
+		led-red-os {
 			label = "ib62x0:red:os";
 			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 		};
-		usb-copy {
+		led-usb-copy {
 			label = "ib62x0:red:usb_copy";
 			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-iconnect.dts b/dts/upstream/src/arm/marvell/kirkwood-iconnect.dts
index aed20185fd7..91b46e77e0b 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-iconnect.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-iconnect.dts
@@ -89,32 +89,32 @@
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-		power-blue {
+		led-power-blue {
 			label = "power:blue";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		power-red {
+		led-power-red {
 			label = "power:red";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		usb1 {
+		led-usb1 {
 			label = "usb1:blue";
 			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
-		usb2 {
+		led-usb2 {
 			label = "usb2:blue";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		usb3 {
+		led-usb3 {
 			label = "usb3:blue";
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		usb4 {
+		led-usb4 {
 			label = "usb4:blue";
 			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		};
-		otb {
+		led-otb {
 			label = "otb:blue";
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
@@ -122,18 +122,16 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
 		pinctrl-names = "default";
 
-		otb {
+		button-otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-iomega_ix2_200.dts b/dts/upstream/src/arm/marvell/kirkwood-iomega_ix2_200.dts
index 2338f495d51..03936215265 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-iomega_ix2_200.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-iomega_ix2_200.dts
@@ -127,44 +127,42 @@
 			      &pmx_led_rebuild &pmx_led_health >;
 		pinctrl-names = "default";
 
-		power_led {
+		led-power-led {
 			label = "status:white:power_led";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		rebuild_led {
+		led-rebuild-led {
 			label = "status:white:rebuild_led";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 		};
-		health_led {
+		led-health-led {
 			label = "status:red:health_led";
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
-		backup_led {
+		led-backup-led {
 			label = "status:blue:backup_led";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
 	};
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_reset &pmx_button_power
 			     &pmx_button_otb>;
 		pinctrl-names = "default";
 
 
-		Power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
-		Reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
-		OTB {
+		button-otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-l-50.dts b/dts/upstream/src/arm/marvell/kirkwood-l-50.dts
index c841eb8e7fb..974bc9de470 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-l-50.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-l-50.dts
@@ -97,52 +97,52 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status_green {
+		led-status-green {
 			label = "l-50:green:status";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		status_red {
+		led-status-red {
 			label = "l-50:red:status";
 			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi {
+		led-wifi {
 			label = "l-50:green:wifi";
 			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy0tpt";
 		};
 
-		internet_green {
+		led-internet-green {
 			label = "l-50:green:internet";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 		};
 
-		internet_red {
+		led-internet-red {
 			label = "l-50:red:internet";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1_green {
+		led-usb1-green {
 			label = "l-50:green:usb1";
 			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "usbport";
 			trigger-sources = <&hub_port3>;
 		};
 
-		usb1_red {
+		led-usb1-red {
 			label = "l-50:red:usb1";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2_green {
+		led-usb2-green {
 			label = "l-50:green:usb2";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "usbport";
 			trigger-sources = <&hub_port1>;
 		};
 
-		usb2_red {
+		led-usb2-red {
 			label = "l-50:red:usb2";
 			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
 		};
@@ -193,7 +193,7 @@
 	keys {
 		compatible = "gpio-keys";
 
-		factory_defaults {
+		button-factory-defaults {
 			label = "factory_defaults";
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-laplug.dts b/dts/upstream/src/arm/marvell/kirkwood-laplug.dts
index 8c2b540eaf4..90ea6cdee8e 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-laplug.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-laplug.dts
@@ -51,7 +51,7 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		power {
+		button-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
@@ -61,11 +61,11 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "laplug_v2:red:power";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		blue-power {
+		led-blue-power {
 			label = "laplug_v2:blue:power";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
diff --git a/dts/upstream/src/arm/marvell/kirkwood-linkstation.dtsi b/dts/upstream/src/arm/marvell/kirkwood-linkstation.dtsi
index b54c9980f63..8a11d2b9d44 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-linkstation.dtsi
+++ b/dts/upstream/src/arm/marvell/kirkwood-linkstation.dtsi
@@ -88,8 +88,6 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_function &pmx_power_switch
 			     &pmx_power_auto_switch>;
 		pinctrl-names = "default";
diff --git a/dts/upstream/src/arm/marvell/kirkwood-linksys-viper.dts b/dts/upstream/src/arm/marvell/kirkwood-linksys-viper.dts
index 27fd6e2337d..8a1c38ab611 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-linksys-viper.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-linksys-viper.dts
@@ -33,18 +33,16 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
@@ -56,12 +54,12 @@
 		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
 		pinctrl-names = "default";
 
-		white-health {
+		led-white-health {
 			label = "viper:white:health";
 			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		white-pulse {
+		led-white-pulse {
 			label = "viper:white:pulse";
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-lsxl.dtsi b/dts/upstream/src/arm/marvell/kirkwood-lsxl.dtsi
index f80af24b9e9..5e0b139dd4f 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-lsxl.dtsi
+++ b/dts/upstream/src/arm/marvell/kirkwood-lsxl.dtsi
@@ -107,24 +107,22 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_function &pmx_power_switch
 			     &pmx_power_auto_switch>;
 		pinctrl-names = "default";
 
-		option {
+		button-option {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
-		reserved {
+		button-reserved {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		power {
+		button-power {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
@@ -139,28 +137,28 @@
 			     &pmx_led_function_blue>;
 		pinctrl-names = "default";
 
-		func_blue {
+		led-func-blue {
 			label = "lsxl:blue:func";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		alarm {
+		led-alarm {
 			label = "lsxl:red:alarm";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
 
-		info {
+		led-info {
 			label = "lsxl:amber:info";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "lsxl:blue:power";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		func_red {
+		led-func-red {
 			label = "lsxl:red:func";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-mplcec4.dts b/dts/upstream/src/arm/marvell/kirkwood-mplcec4.dts
index e87ea714654..6533b49a15b 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-mplcec4.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-mplcec4.dts
@@ -114,36 +114,36 @@
 			    >;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 		};
 
-		user1o {
+		led-user1o {
 			label = "user1:orange";
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user1g {
+		led-user1g {
 			label = "user1:green";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user0o {
+		led-user0o {
 			label = "user0:orange";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user0g {
+		led-user0g {
 			label = "user0:green";
 			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		misc {
+		led-misc {
 			label = "status:orange:misc";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "on";
diff --git a/dts/upstream/src/arm/marvell/kirkwood-mv88f6281gtw-ge.dts b/dts/upstream/src/arm/marvell/kirkwood-mv88f6281gtw-ge.dts
index 5a77286136c..e3b41784c87 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-mv88f6281gtw-ge.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -73,17 +73,17 @@
 		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
 		pinctrl-names = "default";
 
-		green-status {
+		led-green-status {
 			label = "gtw:green:Status";
 			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		red-status {
+		led-red-status {
 			label = "gtw:red:Status";
 			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		green-usb {
+		led-green-usb {
 			label = "gtw:green:USB";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -91,17 +91,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_keys>;
 		pinctrl-names = "default";
 
-		restart {
+		button-restart {
 			label = "SWR Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wps {
+		button-wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-netxbig.dtsi b/dts/upstream/src/arm/marvell/kirkwood-netxbig.dtsi
index b5737026e24..d4edf272738 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-netxbig.dtsi
+++ b/dts/upstream/src/arm/marvell/kirkwood-netxbig.dtsi
@@ -53,26 +53,24 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		/*
 		 * esc and power represent a three position rocker
 		 * switch. Thus the conventional KEY_POWER does not fit
 		 */
-		exc {
+		button-exc {
 			label = "Back power switch (on|auto)";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
-		power {
+		button-power {
 			label = "Back power switch (auto|off)";
 			linux,code = <KEY_1>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		option {
+		button-option {
 			label = "Function button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-ns2-common.dtsi b/dts/upstream/src/arm/marvell/kirkwood-ns2-common.dtsi
index 51530ea8662..d6b615cf639 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-ns2-common.dtsi
+++ b/dts/upstream/src/arm/marvell/kirkwood-ns2-common.dtsi
@@ -55,10 +55,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
@@ -68,7 +66,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "ns2:red:fail";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-ns2lite.dts b/dts/upstream/src/arm/marvell/kirkwood-ns2lite.dts
index b0cb5907ed6..686bcd6f0f3 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-ns2lite.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-ns2lite.dts
@@ -24,7 +24,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-sata {
+		led-blue-sata {
 			label = "ns2:blue:sata";
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "disk-activity";
diff --git a/dts/upstream/src/arm/marvell/kirkwood-nsa310.dts b/dts/upstream/src/arm/marvell/kirkwood-nsa310.dts
index c1799a07816..3555ac1c3b1 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-nsa310.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-nsa310.dts
@@ -87,43 +87,43 @@
 			     &pmx_led_hdd_green &pmx_led_hdd_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa310:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		red-sys {
+		led-red-sys {
 			label = "nsa310:red:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd {
+		led-green-hdd {
 			label = "nsa310:green:hdd";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd {
+		led-red-hdd {
 			label = "nsa310:red:hdd";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-esata {
+		led-green-esata {
 			label = "nsa310:green:esata";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-esata {
+		led-red-esata {
 			label = "nsa310:red:esata";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa310:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		red-usb {
+		led-red-usb {
 			label = "nsa310:red:usb";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa310:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa310:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-nsa310a.dts b/dts/upstream/src/arm/marvell/kirkwood-nsa310a.dts
index b85e314f045..ddf84092aad 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-nsa310a.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-nsa310a.dts
@@ -75,39 +75,39 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa310:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		red-sys {
+		led-red-sys {
 			label = "nsa310:red:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd {
+		led-green-hdd {
 			label = "nsa310:green:hdd";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd {
+		led-red-hdd {
 			label = "nsa310:red:hdd";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-esata {
+		led-green-esata {
 			label = "nsa310:green:esata";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-esata {
+		led-red-esata {
 			label = "nsa310:red:esata";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa310:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa310:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa310:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-nsa310s.dts b/dts/upstream/src/arm/marvell/kirkwood-nsa310s.dts
index 49da633a1bc..47deb93c90a 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-nsa310s.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-nsa310s.dts
@@ -35,24 +35,22 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
 		};
 
-		copy {
+		button-copy {
 			label = "Copy Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-nsa320.dts b/dts/upstream/src/arm/marvell/kirkwood-nsa320.dts
index 652405e6500..dd5c8ffc878 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-nsa320.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-nsa320.dts
@@ -142,39 +142,39 @@
 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa320:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		orange-sys {
+		led-orange-sys {
 			label = "nsa320:orange:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd1 {
+		led-green-hdd1 {
 			label = "nsa320:green:hdd1";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd1 {
+		led-red-hdd1 {
 			label = "nsa320:red:hdd1";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd2 {
+		led-green-hdd2 {
 			label = "nsa320:green:hdd2";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd2 {
+		led-red-hdd2 {
 			label = "nsa320:red:hdd2";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa320:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa320:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa320:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-nsa325.dts b/dts/upstream/src/arm/marvell/kirkwood-nsa325.dts
index 371456de34b..f0786a5f2ce 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-nsa325.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-nsa325.dts
@@ -162,39 +162,39 @@
 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa325:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		orange-sys {
+		led-orange-sys {
 			label = "nsa325:orange:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd1 {
+		led-green-hdd1 {
 			label = "nsa325:green:hdd1";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd1 {
+		led-red-hdd1 {
 			label = "nsa325:red:hdd1";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd2 {
+		led-green-hdd2 {
 			label = "nsa325:green:hdd2";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd2 {
+		led-red-hdd2 {
 			label = "nsa325:red:hdd2";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa325:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa325:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa325:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-nsa3x0-common.dtsi b/dts/upstream/src/arm/marvell/kirkwood-nsa3x0-common.dtsi
index ea3d36512e9..e9bd9c551af 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-nsa3x0-common.dtsi
+++ b/dts/upstream/src/arm/marvell/kirkwood-nsa3x0-common.dtsi
@@ -63,22 +63,20 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		copy {
+		button-copy {
 			label = "Copy Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-openblocks_a6.dts b/dts/upstream/src/arm/marvell/kirkwood-openblocks_a6.dts
index 8ea430168ea..20c6290d203 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-openblocks_a6.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-openblocks_a6.dts
@@ -115,10 +115,8 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_gpio_init>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Init Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-openblocks_a7.dts b/dts/upstream/src/arm/marvell/kirkwood-openblocks_a7.dts
index 946f0f453dd..9c438f10f73 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-openblocks_a7.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-openblocks_a7.dts
@@ -136,8 +136,6 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_gpio_init>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		button {
 			label = "Init Button";
diff --git a/dts/upstream/src/arm/marvell/kirkwood-pogo_e02.dts b/dts/upstream/src/arm/marvell/kirkwood-pogo_e02.dts
index f9e95e55f36..39a5345332d 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-pogo_e02.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-pogo_e02.dts
@@ -33,12 +33,12 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		health {
+		led-health {
 			label = "pogo_e02:green:health";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "pogo_e02:orange:fault";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-pogoplug-series-4.dts b/dts/upstream/src/arm/marvell/kirkwood-pogoplug-series-4.dts
index 5aa4669ae25..0e9c4cf7982 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-pogoplug-series-4.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-pogoplug-series-4.dts
@@ -29,12 +29,10 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_eject>;
 		pinctrl-names = "default";
 
-		eject {
+		button-eject {
 			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_EJECTCD>;
@@ -48,12 +46,12 @@
 		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "pogoplugv4:green:health";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
-		fault {
+		led-fault {
 			label = "pogoplugv4:red:fault";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-sheevaplug-esata.dts b/dts/upstream/src/arm/marvell/kirkwood-sheevaplug-esata.dts
index ae8f493c9a0..eb185273376 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-sheevaplug-esata.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-sheevaplug-esata.dts
@@ -33,7 +33,7 @@
 		pinctrl-0 = <&pmx_led_blue>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "sheevaplug:blue:health";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/dts/upstream/src/arm/marvell/kirkwood-sheevaplug.dts b/dts/upstream/src/arm/marvell/kirkwood-sheevaplug.dts
index c73cc904e5c..ce73fcf2255 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-sheevaplug.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-sheevaplug.dts
@@ -28,13 +28,13 @@
 		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "sheevaplug:blue:health";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		misc {
+		led-misc {
 			label = "sheevaplug:red:misc";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-synology.dtsi b/dts/upstream/src/arm/marvell/kirkwood-synology.dtsi
index 20964eb48fd..6b7c5218b1f 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-synology.dtsi
+++ b/dts/upstream/src/arm/marvell/kirkwood-synology.dtsi
@@ -410,7 +410,7 @@
 		pinctrl-0 = <&pmx_alarmled_12>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:alarm";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
@@ -424,42 +424,42 @@
 			     &pmx_hddled_26 &pmx_hddled_27>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-green {
+		led-hdd3-green {
 			label = "synology:green:hdd3";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-amber {
+		led-hdd3-amber {
 			label = "synology:amber:hdd3";
 			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-green {
+		led-hdd4-green {
 			label = "synology:green:hdd4";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-amber {
+		led-hdd4-amber {
 			label = "synology:amber:hdd4";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
@@ -471,12 +471,12 @@
 		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
@@ -488,22 +488,22 @@
 		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 		};
@@ -518,52 +518,52 @@
 			     &pmx_hddled_45>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-green {
+		led-hdd3-green {
 			label = "synology:green:hdd3";
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-amber {
+		led-hdd3-amber {
 			label = "synology:amber:hdd3";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-green {
+		led-hdd4-green {
 			label = "synology:green:hdd4";
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-amber {
+		led-hdd4-amber {
 			label = "synology:amber:hdd4";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd5-green {
+		led-hdd5-green {
 			label = "synology:green:hdd5";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd5-amber {
+		led-hdd5-amber {
 			label = "synology:amber:hdd5";
 			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		};
@@ -575,22 +575,22 @@
 		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/kirkwood-t5325.dts b/dts/upstream/src/arm/marvell/kirkwood-t5325.dts
index ad093324e07..a6e77a487d0 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-t5325.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-t5325.dts
@@ -156,12 +156,10 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_power>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-ts219-6281.dts b/dts/upstream/src/arm/marvell/kirkwood-ts219-6281.dts
index 30892c19ace..a2e0ad4b84d 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-ts219-6281.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-ts219-6281.dts
@@ -35,17 +35,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-ts219-6282.dts b/dts/upstream/src/arm/marvell/kirkwood-ts219-6282.dts
index aba1205981f..35be6bce1db 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-ts219-6282.dts
+++ b/dts/upstream/src/arm/marvell/kirkwood-ts219-6282.dts
@@ -35,17 +35,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/kirkwood-ts419.dtsi b/dts/upstream/src/arm/marvell/kirkwood-ts419.dtsi
index 717236853e4..f136059607b 100644
--- a/dts/upstream/src/arm/marvell/kirkwood-ts419.dtsi
+++ b/dts/upstream/src/arm/marvell/kirkwood-ts419.dtsi
@@ -36,17 +36,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/mvebu-linkstation-gpio-simple.dtsi b/dts/upstream/src/arm/marvell/mvebu-linkstation-gpio-simple.dtsi
index c2d87ba6190..055ac754c5f 100644
--- a/dts/upstream/src/arm/marvell/mvebu-linkstation-gpio-simple.dtsi
+++ b/dts/upstream/src/arm/marvell/mvebu-linkstation-gpio-simple.dtsi
@@ -48,8 +48,6 @@
 / {
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_power_switch>;
 		pinctrl-names = "default";
 
diff --git a/dts/upstream/src/arm/marvell/orion5x-lacie-d2-network.dts b/dts/upstream/src/arm/marvell/orion5x-lacie-d2-network.dts
index 03471d30bfd..12a4aac2633 100644
--- a/dts/upstream/src/arm/marvell/orion5x-lacie-d2-network.dts
+++ b/dts/upstream/src/arm/marvell/orion5x-lacie-d2-network.dts
@@ -35,22 +35,21 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		front_button {
+
+		button-front {
 			label = "Front Push Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
 		};
 
-		power_rocker_sw_on {
+		switch-power-rocker-sw-on {
 			label = "Power rocker switch (on|auto)";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
 			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		power_rocker_sw_off {
+		switch-power-rocker-sw-off {
 			label = "Power rocker switch (auto|off)";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
diff --git a/dts/upstream/src/arm/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts b/dts/upstream/src/arm/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
index f17e25ac98d..f81acb9b722 100644
--- a/dts/upstream/src/arm/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/dts/upstream/src/arm/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -39,9 +39,8 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_power_button>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@1 {
+
+		button-1 {
 			label = "Power-on Switch";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
@@ -53,7 +52,7 @@
 		pinctrl-0 = <&pmx_power_led>;
 		pinctrl-names = "default";
 
-		led@1 {
+		led-1 {
 			label = "power:blue";
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/orion5x-linkstation-lschl.dts b/dts/upstream/src/arm/marvell/orion5x-linkstation-lschl.dts
index ee751995c8d..79fee048c90 100644
--- a/dts/upstream/src/arm/marvell/orion5x-linkstation-lschl.dts
+++ b/dts/upstream/src/arm/marvell/orion5x-linkstation-lschl.dts
@@ -61,7 +61,7 @@
 	};
 
 	gpio_keys {
-		func {
+		func-button {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
@@ -90,7 +90,7 @@
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
 
-		func {
+		func-led {
 			label = "lschl:func:blue:top";
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/dts/upstream/src/arm/marvell/orion5x-lswsgl.dts b/dts/upstream/src/arm/marvell/orion5x-lswsgl.dts
index 2fbc17d6dfa..e0da406c430 100644
--- a/dts/upstream/src/arm/marvell/orion5x-lswsgl.dts
+++ b/dts/upstream/src/arm/marvell/orion5x-lswsgl.dts
@@ -74,22 +74,21 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		func {
+
+		key-func {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		key-power {
 			label = "Power-on Switch";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 		};
 
-		autopower {
+		key-autopower {
 			label = "Power-auto Switch";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
@@ -103,24 +102,24 @@
 			     &pmx_led_power>;
 		pinctrl-names = "default";
 
-		alarm {
+		led-alarm {
 			label = "lswsgl:alarm:red";
-			gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 		};
 
-		info {
+		led-info {
 			label = "lswsgl:info:amber";
-			gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
 
-		func {
+		led-func {
 			label = "lswsgl:func:blue:top";
-			gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "lswsgl:power:blue:bottom";
-			gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 	};
diff --git a/dts/upstream/src/arm/marvell/orion5x-maxtor-shared-storage-2.dts b/dts/upstream/src/arm/marvell/orion5x-maxtor-shared-storage-2.dts
index d5785999835..cb1bd24b7ae 100644
--- a/dts/upstream/src/arm/marvell/orion5x-maxtor-shared-storage-2.dts
+++ b/dts/upstream/src/arm/marvell/orion5x-maxtor-shared-storage-2.dts
@@ -35,15 +35,14 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power {
+
+		key-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		key-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/orion5x-netgear-wnr854t.dts b/dts/upstream/src/arm/marvell/orion5x-netgear-wnr854t.dts
index fb203e7d37f..d63ea15539a 100644
--- a/dts/upstream/src/arm/marvell/orion5x-netgear-wnr854t.dts
+++ b/dts/upstream/src/arm/marvell/orion5x-netgear-wnr854t.dts
@@ -35,7 +35,7 @@
 		pinctrl-0 = <&pmx_reset_button>;
 		pinctrl-names = "default";
 
-		reset {
+		key-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm/marvell/orion5x-rd88f5182-nas.dts b/dts/upstream/src/arm/marvell/orion5x-rd88f5182-nas.dts
index fd78aa02a3c..75ab913b21e 100644
--- a/dts/upstream/src/arm/marvell/orion5x-rd88f5182-nas.dts
+++ b/dts/upstream/src/arm/marvell/orion5x-rd88f5182-nas.dts
@@ -32,7 +32,7 @@
 		pinctrl-0 = <&pmx_debug_led>;
 		pinctrl-names = "default";
 
-		led@0 {
+		led-0 {
 			label = "rd88f5182:cpu";
 			linux,default-trigger = "heartbeat";
 			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
diff --git a/dts/upstream/src/arm/mediatek/mt2701-evb.dts b/dts/upstream/src/arm/mediatek/mt2701-evb.dts
index 9c7325f1893..4c76366aa93 100644
--- a/dts/upstream/src/arm/mediatek/mt2701-evb.dts
+++ b/dts/upstream/src/arm/mediatek/mt2701-evb.dts
@@ -231,7 +231,7 @@
 				 <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>,
 				 <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>,
 				 <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up;
 		};
 	};
diff --git a/dts/upstream/src/arm/mediatek/mt7623.dtsi b/dts/upstream/src/arm/mediatek/mt7623.dtsi
index f0b4a09004b..814586abc29 100644
--- a/dts/upstream/src/arm/mediatek/mt7623.dtsi
+++ b/dts/upstream/src/arm/mediatek/mt7623.dtsi
@@ -1143,13 +1143,13 @@
 				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
 				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-clk {
 			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
 		};
 
@@ -1167,14 +1167,14 @@
 				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
 				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-clk {
 			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
 			bias-pull-down;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 		};
 
 		pins-wp {
@@ -1197,13 +1197,13 @@
 				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
 				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-clk {
 			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
@@ -1211,7 +1211,7 @@
 	nand_pins_default: nanddefault {
 		pins-ale {
 			pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -1226,13 +1226,13 @@
 				 <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
 				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up;
 		};
 
 		pins-we {
 			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
diff --git a/dts/upstream/src/arm/nspire/nspire-classic.dtsi b/dts/upstream/src/arm/nspire/nspire-classic.dtsi
index a6e9cbf5152..0ee53d3ecd5 100644
--- a/dts/upstream/src/arm/nspire/nspire-classic.dtsi
+++ b/dts/upstream/src/arm/nspire/nspire-classic.dtsi
@@ -55,7 +55,7 @@
 };
 
 / {
-	memory {
+	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x2000000>; /* 32 MB */
 	};
diff --git a/dts/upstream/src/arm/nspire/nspire-cx.dts b/dts/upstream/src/arm/nspire/nspire-cx.dts
index 29f0181e5b3..debeff0ec01 100644
--- a/dts/upstream/src/arm/nspire/nspire-cx.dts
+++ b/dts/upstream/src/arm/nspire/nspire-cx.dts
@@ -122,7 +122,7 @@
 	model = "TI-NSPIRE CX";
 	compatible = "ti,nspire-cx";
 
-	memory {
+	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x4000000>; /* 64 MB */
 	};
diff --git a/dts/upstream/src/arm/nspire/nspire.dtsi b/dts/upstream/src/arm/nspire/nspire.dtsi
index d56fef7250d..95588b716c6 100644
--- a/dts/upstream/src/arm/nspire/nspire.dtsi
+++ b/dts/upstream/src/arm/nspire/nspire.dtsi
@@ -170,9 +170,12 @@
 			};
 
 			watchdog: watchdog@90060000 {
-				compatible = "arm,primecell";
+				compatible = "arm,sp805", "arm,primecell";
 				reg = <0x90060000 0x1000>;
 				interrupts = <3>;
+				clocks = <&apb_pclk>, <&apb_pclk>;
+				clock-names = "wdog_clk", "apb_pclk";
+				status = "disabled";
 			};
 
 			rtc: rtc@90090000 {
diff --git a/dts/upstream/src/arm/nuvoton/nuvoton-npcm730-kudo.dts b/dts/upstream/src/arm/nuvoton/nuvoton-npcm730-kudo.dts
index 5787ae95d3b..1f07ba38291 100644
--- a/dts/upstream/src/arm/nuvoton/nuvoton-npcm730-kudo.dts
+++ b/dts/upstream/src/arm/nuvoton/nuvoton-npcm730-kudo.dts
@@ -525,7 +525,7 @@
 			};
 		};
 
-		i2c-bus@4 {
+		i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
@@ -537,7 +537,7 @@
 			};
 		};
 
-		i2c-bus@5 {
+		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
@@ -549,7 +549,7 @@
 			};
 		};
 
-		i2c-bus@6 {
+		i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
@@ -561,7 +561,7 @@
 			};
 		};
 
-		i2c-bus@7 {
+		i2c@7 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
@@ -580,7 +580,7 @@
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
 
-		i2c-bus@2 {
+		i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
@@ -620,7 +620,7 @@
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
 
-		i2c-bus@0 {
+		i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
@@ -632,7 +632,7 @@
 			};
 		};
 
-		i2c-bus@1 {
+		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
@@ -691,7 +691,7 @@
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
 
-		i2c-bus@3 {
+		i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
@@ -703,7 +703,7 @@
 			};
 		};
 
-		i2c-bus@4 {
+		i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
@@ -715,7 +715,7 @@
 			};
 		};
 
-		i2c-bus@5 {
+		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
@@ -726,7 +726,7 @@
 				reg = <0x28>;
 			};
 		};
-		i2c-bus@6 {
+		i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
diff --git a/dts/upstream/src/arm/nuvoton/nuvoton-npcm750-runbmc-olympus.dts b/dts/upstream/src/arm/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
index baa39d0c103..087f4ac4318 100644
--- a/dts/upstream/src/arm/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
+++ b/dts/upstream/src/arm/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
@@ -215,43 +215,43 @@
 		reg = <0x70>;
 		i2c-mux-idle-disconnect;
 
-		i2c_slot1a: i2c-bus@0 {
+		i2c_slot1a: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
 		};
 
-		i2c_slot1b: i2c-bus@1 {
+		i2c_slot1b: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
 		};
 
-		i2c_slot2a: i2c-bus@2 {
+		i2c_slot2a: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
 		};
 
-		i2c_slot2b: i2c-bus@3 {
+		i2c_slot2b: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
 		};
 
-		i2c_slot3: i2c-bus@4 {
+		i2c_slot3: i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
 		};
 
-		i2c_slot4: i2c-bus@5 {
+		i2c_slot4: i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
 		};
 
-		i2c_slot5: i2c-bus@6 {
+		i2c_slot5: i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
@@ -265,24 +265,24 @@
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
 
-		i2c_m2_s1: i2c-bus@0 {
+		i2c_m2_s1: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
 		};
 
-		i2c_m2_s2: i2c-bus@1 {
+		i2c_m2_s2: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
 		};
-		i2c_m2_s3: i2c-bus@2 {
+		i2c_m2_s3: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
 		};
 
-		i2c_m2_s4: i2c-bus@3 {
+		i2c_m2_s4: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
diff --git a/dts/upstream/src/arm/nxp/imx/e60k02.dtsi b/dts/upstream/src/arm/nxp/imx/e60k02.dtsi
index 13756d39fb7..0029c12f16c 100644
--- a/dts/upstream/src/arm/nxp/imx/e60k02.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/e60k02.dtsi
@@ -14,6 +14,10 @@
 #include <dt-bindings/input/input.h>
 
 / {
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
 
 	chosen {
 		stdout-path = &uart1;
diff --git a/dts/upstream/src/arm/nxp/imx/imx51-apf51dev.dts b/dts/upstream/src/arm/nxp/imx/imx51-apf51dev.dts
index b61d55ca146..de6b7607510 100644
--- a/dts/upstream/src/arm/nxp/imx/imx51-apf51dev.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx51-apf51dev.dts
@@ -25,8 +25,8 @@
 		pinctrl-0 = <&pinctrl_ipu_disp1>;
 
 		display-timings {
-			lw700 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-lw700 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx51-babbage.dts b/dts/upstream/src/arm/nxp/imx/imx51-babbage.dts
index 16ff543f3fb..f4a47e8348b 100644
--- a/dts/upstream/src/arm/nxp/imx/imx51-babbage.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx51-babbage.dts
@@ -89,7 +89,7 @@
 		status = "disabled";
 		display-timings {
 			native-mode = <&timing1>;
-			timing1: claawvga {
+			timing1: timing-claawvga {
 				clock-frequency = <27000000>;
 				hactive = <800>;
 				vactive = <480>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx51-ts4800.dts b/dts/upstream/src/arm/nxp/imx/imx51-ts4800.dts
index 2bd0761c7e9..079bd3d1499 100644
--- a/dts/upstream/src/arm/nxp/imx/imx51-ts4800.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx51-ts4800.dts
@@ -58,8 +58,8 @@
 		pinctrl-0 = <&pinctrl_lcd>;
 
 		display-timings {
-			800x480p60 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-800x480p60 {
 				clock-frequency = <30066000>;
 				hactive = <800>;
 				vactive = <480>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-m53evk.dts b/dts/upstream/src/arm/nxp/imx/imx53-m53evk.dts
index 1353d985969..ba0c62994f7 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-m53evk.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx53-m53evk.dts
@@ -17,8 +17,8 @@
 		pinctrl-0 = <&pinctrl_ipu_disp1>;
 
 		display-timings {
-			800x480p60 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-800x480p60 {
 				clock-frequency = <31500000>;
 				hactive = <800>;
 				vactive = <480>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-m53menlo.dts b/dts/upstream/src/arm/nxp/imx/imx53-m53menlo.dts
index 4d77b6077fc..558751e730f 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-m53menlo.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx53-m53menlo.dts
@@ -64,6 +64,7 @@
 				reg = <0>;
 
 				lvds_decoder_in: endpoint {
+					data-mapping = "jeida-18";
 					remote-endpoint = <&lvds0_out>;
 				};
 			};
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-tx53-x03x.dts b/dts/upstream/src/arm/nxp/imx/imx53-tx53-x03x.dts
index a7f77527269..a02d77bb567 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-tx53-x03x.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx53-tx53-x03x.dts
@@ -67,7 +67,7 @@
 		};
 
 		display-timings {
-			VGA {
+			timing-vga {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -83,7 +83,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ETV570 {
+			timing-etc570 {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -99,7 +99,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ET0350 {
+			timing-et0350 {
 				clock-frequency = <6413760>;
 				hactive = <320>;
 				vactive = <240>;
@@ -115,7 +115,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ET0430 {
+			timing-et0430 {
 				clock-frequency = <9009000>;
 				hactive = <480>;
 				vactive = <272>;
@@ -131,7 +131,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0500 {
+			timing-et0500 {
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -147,7 +147,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ET0700 { /* same as ET0500 */
+			timing-et0700 { /* same as ET0500 */
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -163,7 +163,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ETQ570 {
+			timing-etq570 {
 				clock-frequency = <6596040>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx53-tx53-x13x.dts b/dts/upstream/src/arm/nxp/imx/imx53-tx53-x13x.dts
index 6cdf2082c74..e10c179dbdb 100644
--- a/dts/upstream/src/arm/nxp/imx/imx53-tx53-x13x.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx53-tx53-x13x.dts
@@ -191,7 +191,7 @@
 		display-timings {
 			native-mode = <&lvds0_timing0>;
 
-			lvds0_timing0: hsd100pxn1 {
+			lvds0_timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -207,7 +207,7 @@
 				pixelclk-active = <1>;
 			};
 
-			lvds0_timing1: nl12880bc20 {
+			lvds0_timing1: timing-nl12880bc20 {
 				clock-frequency = <71000000>;
 				hactive = <1280>;
 				vactive = <800>;
@@ -233,7 +233,7 @@
 		display-timings {
 			native-mode = <&lvds1_timing0>;
 
-			lvds1_timing0: hsd100pxn1 {
+			lvds1_timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos2_4.dts b/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos2_4.dts
index dfa6f64d43c..c9b2ea2b24b 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos2_4.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos2_4.dts
@@ -82,11 +82,10 @@
 		compatible = "lg,lg4573";
 		spi-max-frequency = <10000000>;
 		reg = <0>;
-		power-on-delay = <10>;
 
 		display-timings {
-			480x800p57 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-480x800p57 {
 				clock-frequency = <27000027>;
 				hactive = <480>;
 				vactive = <800>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_4.dts b/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
index a5ac7934685..9ec038f1d0f 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
@@ -36,8 +36,8 @@
 		status = "okay";
 
 		display-timings {
-			480x800p60 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-480x800p60 {
 				clock-frequency = <30000000>;
 				hactive = <480>;
 				vactive = <800>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_7.dts b/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
index 5a25bdbbeb6..b3129832f47 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
+++ b/dts/upstream/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
@@ -25,8 +25,8 @@
 		status = "okay";
 
 		display-timings {
-			800x480p60 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-800x480p60 {
 				clock-frequency = <33246000>;
 				hactive = <800>;
 				vactive = <480>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6dl-kontron-samx6i-ads2.dts b/dts/upstream/src/arm/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
new file mode 100644
index 00000000000..6a0c53f23a1
--- /dev/null
+++ b/dts/upstream/src/arm/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include "imx6qdl-kontron-samx6i-ads2.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAMX6i Dual-Lite/Solo on SMARC Eval 2.0 carrier";
+	compatible = "kontron,imx6dl-samx6i-ads2", "kontron,imx6dl-samx6i", "fsl,imx6dl";
+};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6dl-kontron-samx6i.dtsi b/dts/upstream/src/arm/nxp/imx/imx6dl-kontron-samx6i.dtsi
index a864fdbd5f1..5a9b819d7ee 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6dl-kontron-samx6i.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6dl-kontron-samx6i.dtsi
@@ -7,6 +7,6 @@
 #include "imx6qdl-kontron-samx6i.dtsi"
 
 / {
-	model = "Kontron SMARC sAMX6i Dual-Lite/Solo";
+	model = "Kontron SMARC-sAMX6i Dual-Lite/Solo";
 	compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl";
 };
diff --git a/dts/upstream/src/arm/nxp/imx/imx6dl-yapp43-common.dtsi b/dts/upstream/src/arm/nxp/imx/imx6dl-yapp43-common.dtsi
index 52a0f6ee426..bcf4d9c870e 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6dl-yapp43-common.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6dl-yapp43-common.dtsi
@@ -274,24 +274,24 @@
 
 		led@0 {
 			chan-name = "R";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
+			led-cur = /bits/ 8 <0x6e>;
+			max-cur = /bits/ 8 <0xc8>;
 			reg = <0>;
 			color = <LED_COLOR_ID_RED>;
 		};
 
 		led@1 {
 			chan-name = "G";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
+			led-cur = /bits/ 8 <0xbe>;
+			max-cur = /bits/ 8 <0xc8>;
 			reg = <1>;
 			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		led@2 {
 			chan-name = "B";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
+			led-cur = /bits/ 8 <0xbe>;
+			max-cur = /bits/ 8 <0xc8>;
 			reg = <2>;
 			color = <LED_COLOR_ID_BLUE>;
 		};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6q-kontron-samx6i-ads2.dts b/dts/upstream/src/arm/nxp/imx/imx6q-kontron-samx6i-ads2.dts
new file mode 100644
index 00000000000..94c395cc020
--- /dev/null
+++ b/dts/upstream/src/arm/nxp/imx/imx6q-kontron-samx6i-ads2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include "imx6qdl-kontron-samx6i-ads2.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAMX6i Quad/Dual on SMARC Eval 2.0 carrier";
+	compatible = "kontron,imx6q-samx6i-ads2", "kontron,imx6q-samx6i", "fsl,imx6q";
+};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6q-kontron-samx6i.dtsi b/dts/upstream/src/arm/nxp/imx/imx6q-kontron-samx6i.dtsi
index 4d6a0c3e845..e7696343607 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6q-kontron-samx6i.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6q-kontron-samx6i.dtsi
@@ -5,31 +5,8 @@
 
 #include "imx6q.dtsi"
 #include "imx6qdl-kontron-samx6i.dtsi"
-#include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Kontron SMARC sAMX6i Quad/Dual";
+	model = "Kontron SMARC-sAMX6i Quad/Dual";
 	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
 };
-
-/* Quad/Dual SoMs have 3 chip-select signals */
-&ecspi4 {
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>,
-		   <&gpio3 25 GPIO_ACTIVE_LOW>;
-};
-
-&pinctrl_ecspi4 {
-	fsl,pins = <
-		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-
-		/* SPI4_IMX_CS2# - connected to internal flash */
-		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
-		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
-		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
-		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
-	>;
-};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
index 48ffb3ee01b..082a2e3a391 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
@@ -485,7 +485,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
index 1eae438fbda..8ec442038ea 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
@@ -482,7 +482,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
index c2ec8572c8a..9df9f79affa 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
@@ -529,7 +529,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw560x.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
index 7cee983da66..7693f92195d 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
@@ -584,7 +584,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5903.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
index fbc704c064b..9d0836df0fe 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
@@ -486,7 +486,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: g101evn010 {
+			timing0: timing-g101evn010 {
 				clock-frequency = <68930000>;
 				hactive = <1280>;
 				vactive = <800>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5904.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
index 07050627918..f4cb9e1d34a 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
@@ -551,7 +551,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
new file mode 100644
index 00000000000..b4a79245b7b
--- /dev/null
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree include for the Kontron SMARC-sAMX6i board on a SMARC Eval
+ * 2.0 carrier (ADS2).
+ *
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out Jack",
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "LINEOUTR",
+			"Line Out Jack", "LINEOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN2L", "Microphone Jack",
+			"IN2R", "Microphone Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&wm8904>;
+		};
+	};
+
+	reg_codec_mic: regulator-codec-mic {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MIC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_codec_1p8v: regulator-codec-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8_S0_CODEC";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&ecspi4 {
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_codec_1p8v>;
+		CPVDD-supply = <&reg_codec_1p8v>;
+		DBVDD-supply = <&reg_codec_1p8v>;
+		DCVDD-supply = <&reg_codec_1p8v>;
+		MICVDD-supply = <&reg_codec_mic>;
+	};
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-kontron-samx6i.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-kontron-samx6i.dtsi
index 85aeebc9485..99b5e78458a 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-kontron-samx6i.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-kontron-samx6i.dtsi
@@ -61,6 +61,18 @@
 		vin-supply = <&reg_smarc_suppy>;
 	};
 
+	reg_sdio: regulator-sdio {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sdio>;
+		regulator-name = "V_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <20000>;
+	};
+
 	reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -137,7 +149,7 @@
 		status = "disabled";
 	};
 
-	i2c_intern: i2c-gpio-intern {
+	i2c_intern: i2c-0 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio_intern>;
@@ -148,7 +160,7 @@
 		#size-cells = <0>;
 	};
 
-	i2c_lcd: i2c-gpio-lcd {
+	i2c_lcd: i2c-1 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio_lcd>;
@@ -160,7 +172,7 @@
 		status = "disabled";
 	};
 
-	i2c_cam: i2c-gpio-cam {
+	i2c_cam: i2c-2 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio_cam>;
@@ -178,7 +190,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux>;
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) |
@@ -190,7 +202,7 @@
 		>;
 	};
 
-	audmux_adu3 {
+	mux-aud3 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT3>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -198,7 +210,7 @@
 		>;
 	};
 
-	audmux_ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
@@ -210,7 +222,7 @@
 		>;
 	};
 
-	audmux_adu4 {
+	mux-aud4 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -244,7 +256,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>;
+		   <&gpio3 29 GPIO_ACTIVE_LOW>,
+		   <&gpio3 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
@@ -259,7 +272,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii-id";
 	phy-handle = <&ethphy>;
 
 	mdio {
@@ -269,7 +282,7 @@
 		ethphy: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <1000>;
 		};
 	};
@@ -356,10 +369,6 @@
 				regulator-always-on;
 			};
 
-			/*
-			 * Per schematics, of all VGEN's, only VGEN5 has some
-			 * usage ... but even that - over DNI resistor
-			 */
 			vgen1 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1550000>;
@@ -380,8 +389,7 @@
 				regulator-max-microvolt = <3300000>;
 			};
 
-			reg_2p5v_s0: vgen5 {
-				regulator-name = "V_2V5_S0";
+			vgen5 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
@@ -464,6 +472,8 @@
 			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
 			/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
 			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+			/* SPI4_CS3# - connected to SMARC SPI0_CS1# */
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
 		>;
 	};
 
@@ -516,7 +526,7 @@
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b0b0 /* RST_GBE0_PHY# */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x1b0b0 /* RST_GBE0_PHY# */
 		>;
 	};
 
@@ -642,6 +652,12 @@
 		>;
 	};
 
+	pinctrl_reg_sdio: reg-sdiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* SDIO_PWR_EN */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
@@ -694,7 +710,6 @@
 
 			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */
 			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */
 		>;
 	};
 
@@ -728,8 +743,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
-	reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
 };
 
 /* LCD_BKLT_PWM */
@@ -797,12 +811,12 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sdio>;
 	no-1-8-v;
 };
 
 /* SDMMC */
 &usdhc4 {
-	/* Internal eMMC, optional on some boards */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
@@ -811,11 +825,13 @@
 	non-removable;
 	vmmc-supply = <&reg_3p3v_s0>;
 	vqmmc-supply = <&reg_1p8v_s0>;
+	status = "okay";
 };
 
 &wdog1 {
 	/* CPLD is feeded by watchdog (hardwired) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6a.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6a.dtsi
index 238f3af4282..807f3c95e3c 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6a.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6a.dtsi
@@ -22,12 +22,16 @@
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		vcc-supply = <&reg_mba6_3p3v>;
 
-		mba_mac_address: mac-address@20 {
-			reg = <0x20 0x6>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mba_mac_address: mac-address@20 {
+				reg = <0x20 0x6>;
+			};
 		};
 	};
 
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6b.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6b.dtsi
index a587bc88f76..789733a45b9 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6b.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-mba6b.dtsi
@@ -32,12 +32,16 @@
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		vcc-supply = <&reg_mba6_3p3v>;
 
-		mba_mac_address: mac-address@20 {
-			reg = <0x20 0x6>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mba_mac_address: mac-address@20 {
+				reg = <0x20 0x6>;
+			};
 		};
 	};
 
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
index 6656e2e762a..0a3deaf92ee 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -786,7 +786,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-tx6-lcd.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-tx6-lcd.dtsi
index 79f2354886b..ded241a3990 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-tx6-lcd.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-tx6-lcd.dtsi
@@ -110,7 +110,7 @@
 		};
 
 		display-timings {
-			VGA {
+			timing-vga {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -126,8 +126,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ETV570 {
-				u-boot,panel-name = "edt,et057090dhu";
+			timing-etv570 {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -143,8 +142,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ET0350 {
-				u-boot,panel-name = "edt,et0350g0dh6";
+			timing-et0350 {
 				clock-frequency = <6413760>;
 				hactive = <320>;
 				vactive = <240>;
@@ -160,8 +158,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ET0430 {
-				u-boot,panel-name = "edt,et0430g0dh6";
+			timing-et0430 {
 				clock-frequency = <9009000>;
 				hactive = <480>;
 				vactive = <272>;
@@ -177,7 +174,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0500 {
+			timing-et0500 {
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -193,8 +190,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ET0700 { /* same as ET0500 */
-				u-boot,panel-name = "edt,etm0700g0dh6";
+			timing-et0700 { /* same as ET0500 */
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -210,7 +206,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ETQ570 {
+			timing-etq570 {
 				clock-frequency = <6596040>;
 				hactive = <320>;
 				vactive = <240>;
@@ -226,8 +222,7 @@
 				pixelclk-active = <0>;
 			};
 
-			CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				u-boot,panel-name = "edt,etm0700g0edh6";
+			timing-comtft { /* same as ET0700 but with inverted pixel clock */
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6qdl-tx6-lvds.dtsi b/dts/upstream/src/arm/nxp/imx/imx6qdl-tx6-lvds.dtsi
index 2ca2eb37e14..4eb53d5677a 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6qdl-tx6-lvds.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6qdl-tx6-lvds.dtsi
@@ -127,8 +127,7 @@
 		};
 
 		display-timings {
-			hsd100pxn1 {
-				u-boot,panel-name = "hannstar,hsd100pxn1";
+			timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -142,7 +141,7 @@
 				pixelclk-active = <1>;
 			};
 
-			VGA {
+			timing-vga {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -158,8 +157,7 @@
 				pixelclk-active = <0>;
 			};
 
-			nl12880bc20 {
-				u-boot,panel-name = "nlt,nl12880bc20-spwg-24";
+			timing-nl12880bc20 {
 				clock-frequency = <71000000>;
 				hactive = <1280>;
 				vactive = <800>;
@@ -175,8 +173,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0700 {
-				u-boot,panel-name = "edt,etm0700g0dh6";
+			timing-et0700 {
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -192,8 +189,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ETV570 {
-				u-boot,panel-name = "edt,et057090dhu";
+			timing-etv570 {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -224,7 +220,7 @@
 		};
 
 		display-timings {
-			hsd100pxn1 {
+			timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -238,7 +234,7 @@
 				pixelclk-active = <1>;
 			};
 
-			VGA {
+			timing-vga {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -254,7 +250,7 @@
 				pixelclk-active = <0>;
 			};
 
-			nl12880bc20 {
+			timing-nl12880bc20 {
 				clock-frequency = <71000000>;
 				hactive = <1280>;
 				vactive = <800>;
diff --git a/dts/upstream/src/arm/nxp/imx/imx6ul-tx6ul.dtsi b/dts/upstream/src/arm/nxp/imx/imx6ul-tx6ul.dtsi
index 1db146ac1c1..864173e3070 100644
--- a/dts/upstream/src/arm/nxp/imx/imx6ul-tx6ul.dtsi
+++ b/dts/upstream/src/arm/nxp/imx/imx6ul-tx6ul.dtsi
@@ -405,7 +405,7 @@
 		status = "okay";
 
 		display-timings {
-			VGA {
+			timing-vga {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -421,7 +421,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ETV570 {
+			timing-etv570 {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -437,7 +437,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0350 {
+			timing-et0350 {
 				clock-frequency = <6413760>;
 				hactive = <320>;
 				vactive = <240>;
@@ -453,7 +453,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0430 {
+			timing-et0430 {
 				clock-frequency = <9009000>;
 				hactive = <480>;
 				vactive = <272>;
@@ -469,7 +469,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ET0500 {
+			timing-et0500 {
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -485,7 +485,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0700 { /* same as ET0500 */
+			timing-et0700 { /* same as ET0500 */
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -501,7 +501,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ETQ570 {
+			timing-etq570 {
 				clock-frequency = <6596040>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/dts/upstream/src/arm/nxp/mxs/imx28-tx28.dts b/dts/upstream/src/arm/nxp/mxs/imx28-tx28.dts
index 5485fe118dc..d38183edf0f 100644
--- a/dts/upstream/src/arm/nxp/mxs/imx28-tx28.dts
+++ b/dts/upstream/src/arm/nxp/mxs/imx28-tx28.dts
@@ -323,7 +323,6 @@
 		display-timings {
 			native-mode = <&timing5>;
 			timing0: timing0 {
-				panel-name = "VGA";
 				clock-frequency = <25175000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -340,7 +339,6 @@
 			};
 
 			timing1: timing1 {
-				panel-name = "ETV570";
 				clock-frequency = <25175000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -357,7 +355,6 @@
 			};
 
 			timing2: timing2 {
-				panel-name = "ET0350";
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
@@ -374,7 +371,6 @@
 			};
 
 			timing3: timing3 {
-				panel-name = "ET0430";
 				clock-frequency = <9000000>;
 				hactive = <480>;
 				vactive = <272>;
@@ -391,7 +387,6 @@
 			};
 
 			timing4: timing4 {
-				panel-name = "ET0500", "ET0700";
 				clock-frequency = <33260000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -408,7 +403,6 @@
 			};
 
 			timing5: timing5 {
-				panel-name = "ETQ570";
 				clock-frequency = <6400000>;
 				hactive = <320>;
 				vactive = <240>;
diff --git a/dts/upstream/src/arm/qcom/msm8226-motorola-falcon.dts b/dts/upstream/src/arm/qcom/msm8226-motorola-falcon.dts
index 029e1b1659c..5dbca83f223 100644
--- a/dts/upstream/src/arm/qcom/msm8226-motorola-falcon.dts
+++ b/dts/upstream/src/arm/qcom/msm8226-motorola-falcon.dts
@@ -96,6 +96,35 @@
 	};
 };
 
+&blsp1_i2c2 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0xc>;
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pm8226_l19>;
+		vid-supply = <&pm8226_lvs1>;
+		pinctrl-0 = <&mag_int_default &mag_reset_default>;
+		pinctrl-names = "default";
+	};
+
+	accelerometer@19 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x19>;
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "0", "1", "0",
+			       "1", "0", "0",
+			       "0", "0", "-1";
+		st,drdy-int-pin = <1>;
+	};
+};
+
 &blsp1_i2c3 {
 	status = "okay";
 
@@ -321,6 +350,30 @@
 };
 
 &tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio63";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+
+	mag_int_default: mag-int-default-state {
+		pins = "gpio66";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
 	reg_lcd_default: reg-lcd-default-state {
 		pins = "gpio31", "gpio33";
 		function = "gpio";
diff --git a/dts/upstream/src/arm/qcom/qcom-apq8026-samsung-milletwifi.dts b/dts/upstream/src/arm/qcom/qcom-apq8026-samsung-milletwifi.dts
new file mode 100644
index 00000000000..7d519156d91
--- /dev/null
+++ b/dts/upstream/src/arm/qcom/qcom-apq8026-samsung-milletwifi.dts
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ * Copyright (c) 2023, Bryant Mairs <bryant@mai.rs>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+	model = "Samsung Galaxy Tab 4 8.0 Wi-Fi";
+	compatible = "samsung,milletwifi", "qcom,apq8026";
+	chassis-type = "tablet";
+
+	aliases {
+		display0 = &framebuffer0;
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <800>;
+			height = <1280>;
+			stride = <(800 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Cover";
+			gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-backlight {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&backlight_i2c_default_state>;
+		pinctrl-names = "default";
+
+		i2c-gpio,delay-us = <4>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+			enable-supply = <&reg_backlight_vddio>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0x3f>;
+
+			/*
+			 * Change transition duration: 200ms, Change
+			 * transition strength: heavy, PWM hysteresis:
+			 * 1-bit w/ 8-bit resolution
+			 */
+			rom-a3h {
+				rom-addr = /bits/ 8 <0xa3>;
+				rom-val = /bits/ 8 <0x5e>;
+			};
+
+			/*
+			 * PWM phase configuration: 3-phase/3 drivers
+			 * (0, 120deg, 240deg, -, -, -),
+			 * PWM frequency: 9616Hz (10-bit)
+			 */
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x34>;
+			};
+
+			/*
+			 * Enable LED drivers 2 & 3, Boot inductor
+			 * current limit: 1.5A/2.6A
+			 */
+			rom-a7h {
+				rom-addr = /bits/ 8 <0xa7>;
+				rom-val = /bits/ 8 <0xfa>;
+			};
+		};
+	};
+
+	reg_backlight_vddio: regulator-backlight-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight_vddio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&backlight_vddio_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en1_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8400000 {
+			reg = <0x08400000 0x1f00000>;
+			no-map;
+		};
+
+		mba_region: mba@a300000 {
+			reg = <0x0a300000 0x100000>;
+			no-map;
+		};
+
+		reserved@cb00000 {
+			reg = <0x0cb00000 0x700000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0x700000>;
+			no-map;
+		};
+
+		adsp_region: adsp@d900000 {
+			reg = <0x0d900000 0x1800000>;
+			no-map;
+		};
+
+		venus@f100000 {
+			reg = <0x0f100000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x260000>;
+			no-map;
+		};
+
+		rfsa@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-0 = <&accel_int_default_state>;
+		pinctrl-names = "default";
+
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
+
+		st,drdy-int-pin = <1>;
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	charger@6a {
+		compatible = "summit,smb358";
+		reg = <0x6a>;
+
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&charger_int_default_state>;
+		pinctrl-names = "default";
+
+		summit,enable-usb-charging;
+		summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+		summit,fast-voltage-threshold-microvolt = <3000000>;
+		summit,chip-temperature-threshold-celsius = <130>;
+		summit,usb-current-limit-microamp = <1500000>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	muic: usb-switch@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&muic_int_default_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "melfas,mms252", "melfas,mms114";
+		reg = <0x48>;
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		avdd-supply = <&reg_tsp_3p3v>;
+		vdd-supply = <&reg_tsp_1p8v>;
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+		pinctrl-0 = <&tsp_int_rst_default_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+			regulator-always-on;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&sdhc2_default_state>, <&sdc2_cd_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default_state: accel-int-default-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_i2c_default_state: backlight-i2c-default-state {
+		pins = "gpio20", "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_vddio_default_state: backlight-vddio-default-state {
+		pins = "gpio74";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	charger_int_default_state: charger-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default_state: muic-int-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default_state: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default_state: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en1_default_state: tsp-en1-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default_state: tsp-int-rst-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/dts/upstream/src/arm/qcom/qcom-apq8064.dtsi b/dts/upstream/src/arm/qcom/qcom-apq8064.dtsi
index 11e60b74c3c..769e151747c 100644
--- a/dts/upstream/src/arm/qcom/qcom-apq8064.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-apq8064.dtsi
@@ -666,12 +666,12 @@
 			qcom,controller-type = "pmic-arbiter";
 		};
 
-		qfprom: qfprom@700000 {
+		qfprom: efuse@700000 {
 			compatible = "qcom,apq8064-qfprom", "qcom,qfprom";
 			reg = <0x00700000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+
 			tsens_calib: calib@404 {
 				reg = <0x404 0x10>;
 			};
@@ -684,7 +684,6 @@
 			compatible = "qcom,gcc-apq8064", "syscon";
 			reg = <0x00900000 0x4000>;
 			#clock-cells = <1>;
-			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			clocks = <&cxo_board>,
 				 <&pxo_board>,
@@ -993,7 +992,7 @@
 			reg = <0x1a400000 0x100>;
 		};
 
-		gpu: adreno-3xx@4300000 {
+		gpu: gpu@4300000 {
 			compatible = "qcom,adreno-320.2", "qcom,adreno";
 			reg = <0x04300000 0x20000>;
 			reg-names = "kgsl_3d0_reg_memory";
diff --git a/dts/upstream/src/arm/qcom/qcom-apq8084.dtsi b/dts/upstream/src/arm/qcom/qcom-apq8084.dtsi
index ca53dff820e..2b52e5d5eb5 100644
--- a/dts/upstream/src/arm/qcom/qcom-apq8084.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-apq8084.dtsi
@@ -245,7 +245,7 @@
 			reg = <0xfc190000 0x10000>;
 		};
 
-		qfprom: qfprom@fc4bc000 {
+		qfprom: efuse@fc4bc000 {
 			compatible = "qcom,apq8084-qfprom", "qcom,qfprom";
 			reg = <0xfc4bc000 0x1000>;
 			#address-cells = <1>;
diff --git a/dts/upstream/src/arm/qcom/qcom-ipq4019.dtsi b/dts/upstream/src/arm/qcom/qcom-ipq4019.dtsi
index 0fb65f2bbcd..56415ab3408 100644
--- a/dts/upstream/src/arm/qcom/qcom-ipq4019.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-ipq4019.dtsi
@@ -187,7 +187,6 @@
 		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-ipq4019";
 			#clock-cells = <1>;
-			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x1800000 0x60000>;
 			clocks = <&xo>, <&sleep_clk>;
diff --git a/dts/upstream/src/arm/qcom/qcom-ipq8064.dtsi b/dts/upstream/src/arm/qcom/qcom-ipq8064.dtsi
index f128510d844..da0fd75f471 100644
--- a/dts/upstream/src/arm/qcom/qcom-ipq8064.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-ipq8064.dtsi
@@ -372,7 +372,7 @@
 			qcom,controller-type = "pmic-arbiter";
 		};
 
-		qfprom: qfprom@700000 {
+		qfprom: efuse@700000 {
 			compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
 			reg = <0x00700000 0x1000>;
 			#address-cells = <1>;
@@ -519,7 +519,6 @@
 			reg = <0x00900000 0x4000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			#power-domain-cells = <1>;
 
 			tsens: thermal-sensor {
 				compatible = "qcom,ipq8064-tsens";
diff --git a/dts/upstream/src/arm/qcom/qcom-mdm9615.dtsi b/dts/upstream/src/arm/qcom/qcom-mdm9615.dtsi
index 34c60994d02..573feb3218c 100644
--- a/dts/upstream/src/arm/qcom/qcom-mdm9615.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-mdm9615.dtsi
@@ -102,7 +102,6 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-mdm9615";
 			#clock-cells = <1>;
-			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 			clocks = <&cxo_board>,
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi b/dts/upstream/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi
index 525d8c608b0..8839b23fc69 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -287,6 +287,10 @@
 	status = "okay";
 };
 
+&smbb {
+	status = "okay";
+};
+
 &usb {
 	extcon = <&smbb>;
 	dr_mode = "peripheral";
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8226-samsung-ms013g.dts b/dts/upstream/src/arm/qcom/qcom-msm8226-samsung-ms013g.dts
new file mode 100644
index 00000000000..2ecc5983d36
--- /dev/null
+++ b/dts/upstream/src/arm/qcom/qcom-msm8226-samsung-ms013g.dts
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Samsung Galaxy Grand 2";
+	compatible = "samsung,ms013g", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-home {
+			label = "Home Key";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&motor_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reserved-memory {
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+
+	vibrator {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor_vdd>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma255";
+		reg = <0x18>;
+		interrupts-extended = <&tlmm 64 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "-1";
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt541";
+
+		reg = <0x20>;
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		vcca-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8226_lvs1>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&sdhc2_default_state &sdhc2_cd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio106", "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	motor_en_default: motor-en-default-state {
+		pins = "gpio111";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdhc2_cd_default: sdhc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8226.dtsi b/dts/upstream/src/arm/qcom/qcom-msm8226.dtsi
index 270973e8562..b2f92ad6499 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8226.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-msm8226.dtsi
@@ -635,7 +635,7 @@
 			reg = <0xfc4ab000 0x4>;
 		};
 
-		qfprom: qfprom@fc4bc000 {
+		qfprom: efuse@fc4bc000 {
 			compatible = "qcom,msm8226-qfprom", "qcom,qfprom";
 			reg = <0xfc4bc000 0x1000>;
 			#address-cells = <1>;
@@ -1046,7 +1046,7 @@
 			};
 		};
 
-		gpu: adreno@fdb00000 {
+		gpu: gpu@fdb00000 {
 			compatible = "qcom,adreno-305.18", "qcom,adreno";
 			reg = <0xfdb00000 0x10000>;
 			reg-names = "kgsl_3d0_reg_memory";
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8660.dtsi b/dts/upstream/src/arm/qcom/qcom-msm8660.dtsi
index 455ba4bf1bf..a66c474cd1a 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8660.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-msm8660.dtsi
@@ -113,7 +113,6 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8660";
 			#clock-cells = <1>;
-			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 			clocks = <&pxo_board>, <&cxo_board>;
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts b/dts/upstream/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts
index 0cbe2d2fbbb..376a3312594 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts
+++ b/dts/upstream/src/arm/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -29,6 +29,10 @@
 			height = <1280>;
 			stride = <(720 * 3)>;
 			format = "r8g8b8";
+			vsp-supply = <&reg_lcd_pos>;
+			vsn-supply = <&reg_lcd_neg>;
+			vdd-supply = <&pm8226_l28>;
+			vddio-supply = <&vddio_disp_vreg>;
 		};
 	};
 
@@ -51,6 +55,18 @@
 		};
 	};
 
+	vddio_disp_vreg: regulator-vddio-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_disp";
+		gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300>;
+		enable-active-high;
+		regulator-boot-on;
+		vin-supply = <&pm8226_l8>;
+		pinctrl-0 = <&disp_vddio_default>;
+		pinctrl-names = "default";
+	};
+
 	reserved-memory {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -68,12 +84,67 @@
 	};
 };
 
+&blsp1_i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0xc>;
+		interrupts-extended = <&tlmm 38 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pm8226_l19>;
+		pinctrl-0 = <&mag_int_default &mag_reset_default>;
+		pinctrl-names = "default";
+	};
+
+	accelerometer@18 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x18>;
+		interrupts-extended = <&tlmm 1 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		st,drdy-int-pin = <1>;
+	};
+};
+
 &blsp1_i2c3 {
+	clock-frequency = <400000>;
 	status = "okay";
 
+	regulator@3e {
+		compatible = "ti,tps65132";
+		reg = <0x3e>;
+		pinctrl-0 = <&reg_lcd_default>;
+		pinctrl-names = "default";
+
+		reg_lcd_pos: outp {
+			regulator-name = "outp";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_lcd_neg: outn {
+			regulator-name = "outn";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	sensor@48 {
 		compatible = "ti,tmp108";
 		reg = <0x48>;
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&temp_alert_default>;
+		pinctrl-names = "default";
+		#thermal-sensor-cells = <0>;
 	};
 };
 
@@ -278,6 +349,56 @@
 	status = "okay";
 };
 
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio1";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+
+	disp_vddio_default: disp-vddio-default-state {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	mag_int_default: mag-int-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	reg_lcd_default: reg-lcd-default-state {
+		pins = "gpio31", "gpio33";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	temp_alert_default: temp-alert-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+};
+
 &usb {
 	extcon = <&smbb>;
 	dr_mode = "peripheral";
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8960.dtsi b/dts/upstream/src/arm/qcom/qcom-msm8960.dtsi
index 922f9e49468..ebc43c5c6e5 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8960.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-msm8960.dtsi
@@ -47,9 +47,9 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x0 0x0>;
+		reg = <0x80000000 0>;
 	};
 
 	cpu-pmu {
@@ -129,7 +129,6 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8960";
 			#clock-cells = <1>;
-			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 			clocks = <&cxo_board>,
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/upstream/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 4aaae8537a3..fdb6e22986c 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -182,7 +182,7 @@
 	status = "okay";
 	clock-frequency = <355000>;
 
-	led-controller@38 {
+	backlight: led-controller@38 {
 		compatible = "ti,lm3630a";
 		status = "okay";
 		reg = <0x38>;
@@ -272,6 +272,8 @@
 		reg = <0>;
 		compatible = "lg,acx467akm-7";
 
+		backlight = <&backlight>;
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&panel_pin>;
 
@@ -328,7 +330,7 @@
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	otg {
+	otg-hog {
 		gpio-hog;
 		gpios = <35 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974-samsung-hlte.dts b/dts/upstream/src/arm/qcom/qcom-msm8974-samsung-hlte.dts
new file mode 100644
index 00000000000..903bb4d1251
--- /dev/null
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974-samsung-hlte.dts
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Samsung Galaxy Note 3";
+	compatible = "samsung,hlte", "qcom,msm8974";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_3; /* SDC3 SD card slot */
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_pin_a>;
+		pinctrl-names = "default";
+
+		key-home {
+			label = "Home Key";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	touch_ldo: regulator-touch {
+		compatible = "regulator-fixed";
+		regulator-name = "touch-ldo";
+
+		gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+
+		pinctrl-0 = <&touch_ldo_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupt-parent = <&pm8941_gpios>;
+		interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8941_l10>;
+		vio-supply = <&touch_ldo>;
+
+		pinctrl-0 = <&touch_pin>;
+		pinctrl-names = "default";
+
+		syna,startup-delay-ms = <100>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x56>;
+
+		interrupt-parent = <&pm8941_gpios>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio5";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio26";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	touch_pin: touchscreen-int-state {
+		pins = "gpio30";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	touch_ldo_pin: touchscreen-ldo-state {
+		pins = "gpio9";
+		function = "normal";
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+	status = "okay";
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <815000>;
+			regulator-max-microvolt = <900000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-0 = <&sdhc1_pin_a>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l21>;
+
+	pinctrl-0 = <&sdhc3_pin_a>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&tlmm {
+	sdhc1_pin_a: sdhc1-pin-active-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	sdhc3_pin_a: sdhc3-pin-active-state {
+		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "sdc3";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974.dtsi b/dts/upstream/src/arm/qcom/qcom-msm8974.dtsi
index 5651bb31bd5..15568579459 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8974.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974.dtsi
@@ -132,7 +132,7 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
+			mboxes = <&apcs 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
@@ -219,7 +219,7 @@
 		interrupt-parent = <&intc>;
 		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 10>;
+		mboxes = <&apcs 10>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <2>;
@@ -244,7 +244,7 @@
 		interrupt-parent = <&intc>;
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 14>;
+		mboxes = <&apcs 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -269,7 +269,7 @@
 		interrupt-parent = <&intc>;
 		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 18>;
+		mboxes = <&apcs 18>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <4>;
@@ -294,9 +294,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-2 = <&apcs 8 9>;
-		qcom,ipc-3 = <&apcs 8 19>;
+		mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
@@ -343,9 +341,11 @@
 			      <0xf9002000 0x1000>;
 		};
 
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
+		apcs: mailbox@f9011000 {
+			compatible = "qcom,msm8974-apcs-kpss-global",
+				     "qcom,msm8994-apcs-kpss-global", "syscon";
 			reg = <0xf9011000 0x1000>;
+			#mbox-cells = <1>;
 		};
 
 		saw_l2: power-manager@f9012000 {
@@ -757,7 +757,7 @@
 			smd-edge {
 				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
 
-				qcom,ipc = <&apcs 8 17>;
+				mboxes = <&apcs 17>;
 				qcom,smd-edge = <6>;
 
 				wcnss {
@@ -1233,7 +1233,7 @@
 			reg = <0xfc4ab000 0x4>;
 		};
 
-		qfprom: qfprom@fc4bc000 {
+		qfprom: efuse@fc4bc000 {
 			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
 			reg = <0xfc4bc000 0x2100>;
 			#address-cells = <1>;
@@ -1576,7 +1576,7 @@
 			smd-edge {
 				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
 
-				qcom,ipc = <&apcs 8 12>;
+				mboxes = <&apcs 12>;
 				qcom,smd-edge = <0>;
 
 				label = "modem";
@@ -2129,7 +2129,7 @@
 			};
 		};
 
-		gpu: adreno@fdb00000 {
+		gpu: gpu@fdb00000 {
 			compatible = "qcom,adreno-330.1", "qcom,adreno";
 			reg = <0xfdb00000 0x10000>;
 			reg-names = "kgsl_3d0_reg_memory";
@@ -2213,7 +2213,7 @@
 			smd-edge {
 				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
-				qcom,ipc = <&apcs 8 8>;
+				mboxes = <&apcs 8>;
 				qcom,smd-edge = <1>;
 				label = "lpass";
 			};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974pro-htc-m8.dts b/dts/upstream/src/arm/qcom/qcom-msm8974pro-htc-m8.dts
new file mode 100644
index 00000000000..b896cc1ad6f
--- /dev/null
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974pro-htc-m8.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "qcom-msm8974pro.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "HTC One (M8)";
+	compatible = "htc,m8", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <20>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <20>;
+			wakeup-source;
+		};
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&boost_bypass_n_pin>;
+		pinctrl-names = "default";
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
+
+&pm8941_vib {
+	status = "okay";
+};
+
+&pronto {
+	vddmx-supply = <&pm8841_s1>;
+	vddcx-supply = <&pm8841_s2>;
+	vddpx-supply = <&pm8941_s3>;
+
+	pinctrl-0 = <&wcnss_pin_a>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		qcom,remote-pid = <4>;
+		label = "pronto";
+
+		wcnss {
+			status = "okay";
+		};
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <815000>;
+			regulator-max-microvolt = <900000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&smbb {
+	status = "okay";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio27", "gpio28";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	wcnss_pin_a: wcnss-pin-active-state {
+		pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "wlan";
+		drive-strength = <6>;
+		bias-pull-down;
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x63>;
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts b/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts
new file mode 100644
index 00000000000..2621c5928b6
--- /dev/null
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
+
+/ {
+	model = "Sony Xperia Z3 Compact";
+	compatible = "sony,xperia-aries", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	gpio-keys {
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&gpio_keys_pin_a {
+	pins = "gpio2", "gpio3", "gpio4", "gpio5";
+};
+
+&smbb {
+	usb-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-current = <2100000>;
+	qcom,fast-charge-current-limit = <1800000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4280000>;
+	qcom,minimum-input-voltage = <4200000>;
+
+	status = "okay";
+};
+
+&synaptics_touchscreen {
+	vio-supply = <&pm8941_s3>;
+};
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi b/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
index e129bb1bd6e..6af7c71c715 100644
--- a/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
+++ b/dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
@@ -380,6 +380,8 @@
 		pm8941_l21: l21 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <500000>;
+			regulator-allow-set-load;
 			regulator-boot-on;
 		};
 
diff --git a/dts/upstream/src/arm/renesas/r8a73a4.dtsi b/dts/upstream/src/arm/renesas/r8a73a4.dtsi
index 9a2ae282a46..85261684b5d 100644
--- a/dts/upstream/src/arm/renesas/r8a73a4.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a73a4.dtsi
@@ -58,6 +58,7 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	tmu0: timer@e61e0000 {
diff --git a/dts/upstream/src/arm/renesas/r8a7742.dtsi b/dts/upstream/src/arm/renesas/r8a7742.dtsi
index d55c344c1cd..3a5d6b434d0 100644
--- a/dts/upstream/src/arm/renesas/r8a7742.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7742.dtsi
@@ -1938,6 +1938,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/dts/upstream/src/arm/renesas/r8a7743.dtsi b/dts/upstream/src/arm/renesas/r8a7743.dtsi
index d917c0a971f..8833898d555 100644
--- a/dts/upstream/src/arm/renesas/r8a7743.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7743.dtsi
@@ -1846,6 +1846,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/dts/upstream/src/arm/renesas/r8a7744.dtsi b/dts/upstream/src/arm/renesas/r8a7744.dtsi
index 754859c38a9..c66c1102fb7 100644
--- a/dts/upstream/src/arm/renesas/r8a7744.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7744.dtsi
@@ -1832,6 +1832,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/dts/upstream/src/arm/renesas/r8a7745.dtsi b/dts/upstream/src/arm/renesas/r8a7745.dtsi
index 16829830049..6ddde364782 100644
--- a/dts/upstream/src/arm/renesas/r8a7745.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7745.dtsi
@@ -1636,6 +1636,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/dts/upstream/src/arm/renesas/r8a77470.dtsi b/dts/upstream/src/arm/renesas/r8a77470.dtsi
index 2375438d83c..a8a12275c98 100644
--- a/dts/upstream/src/arm/renesas/r8a77470.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a77470.dtsi
@@ -1061,6 +1061,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/dts/upstream/src/arm/renesas/r8a7790.dtsi b/dts/upstream/src/arm/renesas/r8a7790.dtsi
index 583b74a9f07..20e4d4c6e74 100644
--- a/dts/upstream/src/arm/renesas/r8a7790.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7790.dtsi
@@ -2012,6 +2012,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/dts/upstream/src/arm/renesas/r8a7791.dtsi b/dts/upstream/src/arm/renesas/r8a7791.dtsi
index de08ceb6223..f9c9e1d8f66 100644
--- a/dts/upstream/src/arm/renesas/r8a7791.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7791.dtsi
@@ -1938,6 +1938,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/dts/upstream/src/arm/renesas/r8a7792.dtsi b/dts/upstream/src/arm/renesas/r8a7792.dtsi
index 7defeb8e4cd..dd3bc32668b 100644
--- a/dts/upstream/src/arm/renesas/r8a7792.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7792.dtsi
@@ -990,5 +990,6 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/dts/upstream/src/arm/renesas/r8a7793.dtsi b/dts/upstream/src/arm/renesas/r8a7793.dtsi
index d32a9d5d3fa..24e66ddf37e 100644
--- a/dts/upstream/src/arm/renesas/r8a7793.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7793.dtsi
@@ -1517,6 +1517,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/dts/upstream/src/arm/renesas/r8a7794.dtsi b/dts/upstream/src/arm/renesas/r8a7794.dtsi
index f37f094cecc..8e6386a79ae 100644
--- a/dts/upstream/src/arm/renesas/r8a7794.dtsi
+++ b/dts/upstream/src/arm/renesas/r8a7794.dtsi
@@ -1484,6 +1484,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clock - can be overridden by the board */
diff --git a/dts/upstream/src/arm/renesas/r9a06g032.dtsi b/dts/upstream/src/arm/renesas/r9a06g032.dtsi
index 45f60eeeaaa..7548291c8d7 100644
--- a/dts/upstream/src/arm/renesas/r9a06g032.dtsi
+++ b/dts/upstream/src/arm/renesas/r9a06g032.dtsi
@@ -316,6 +316,24 @@
 			data-width = <8>;
 		};
 
+		gmac1: ethernet@44000000 {
+			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+			reg = <0x44000000 0x2000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
+			clock-names = "stmmaceth";
+			power-domains = <&sysctrl>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <2048>;
+			rx-fifo-depth = <4096>;
+			pcs-handle = <&mii_conv1>;
+			status = "disabled";
+		};
+
 		gmac2: ethernet@44002000 {
 			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
 			reg = <0x44002000 0x2000>;
@@ -466,6 +484,7 @@
 			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	usbphy: usb-phy {
diff --git a/dts/upstream/src/arm/rockchip/rk3036.dtsi b/dts/upstream/src/arm/rockchip/rk3036.dtsi
index 04af224005f..96279d1e02f 100644
--- a/dts/upstream/src/arm/rockchip/rk3036.dtsi
+++ b/dts/upstream/src/arm/rockchip/rk3036.dtsi
@@ -402,6 +402,7 @@
 		rockchip,grf = <&grf>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmi_ctl>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
diff --git a/dts/upstream/src/arm/rockchip/rk3066a-mk808.dts b/dts/upstream/src/arm/rockchip/rk3066a-mk808.dts
index 06790f05b39..4de9a45c488 100644
--- a/dts/upstream/src/arm/rockchip/rk3066a-mk808.dts
+++ b/dts/upstream/src/arm/rockchip/rk3066a-mk808.dts
@@ -143,6 +143,14 @@
 	};
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
+
 &mmc0 {
 	bus-width = <4>;
 	cap-mmc-highspeed;
diff --git a/dts/upstream/src/arm/rockchip/rk3066a.dtsi b/dts/upstream/src/arm/rockchip/rk3066a.dtsi
index 15cbd94d7ec..3f6d4945973 100644
--- a/dts/upstream/src/arm/rockchip/rk3066a.dtsi
+++ b/dts/upstream/src/arm/rockchip/rk3066a.dtsi
@@ -53,6 +53,22 @@
 		ports = <&vop0_out>, <&vop1_out>;
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "HDMI";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+	};
+
 	sram: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x10000>;
@@ -880,7 +896,3 @@
 &wdt {
 	compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
 };
-
-&emac {
-	compatible = "rockchip,rk3066-emac";
-};
diff --git a/dts/upstream/src/arm/rockchip/rk3128.dtsi b/dts/upstream/src/arm/rockchip/rk3128.dtsi
index fb98873fd94..23e633387c2 100644
--- a/dts/upstream/src/arm/rockchip/rk3128.dtsi
+++ b/dts/upstream/src/arm/rockchip/rk3128.dtsi
@@ -216,6 +216,8 @@
 					 <&cru ACLK_LCDC0>,
 					 <&cru HCLK_LCDC0>,
 					 <&cru PCLK_MIPI>,
+					 <&cru PCLK_MIPIPHY>,
+					 <&cru SCLK_MIPI_24M>,
 					 <&cru ACLK_RGA>,
 					 <&cru HCLK_RGA>,
 					 <&cru ACLK_VIO0>,
@@ -275,6 +277,43 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vop>;
 			};
+
+			vop_out_dsi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dsi_in_vop>;
+			};
+		};
+	};
+
+	dsi: dsi@10110000 {
+		compatible = "rockchip,rk3128-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x10110000 0x4000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI>;
+		clock-names = "pclk";
+		phys = <&dphy>;
+		phy-names = "dphy";
+		power-domains = <&power RK3128_PD_VIO>;
+		resets = <&cru SRST_VIO_MIPI_DSI>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi_in: port@0 {
+				reg = <0>;
+
+				dsi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_dsi>;
+				};
+			};
+
+			dsi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -360,6 +399,41 @@
 		status = "disabled";
 	};
 
+	i2s_8ch: i2s@10200000 {
+		compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s";
+		reg = <0x10200000 0x1000>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S_8CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&pdma 14>, <&pdma 15>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	spdif: spdif@10204000 {
+		compatible = "rockchip,rk3128-spdif", "rockchip,rk3066-spdif";
+		reg = <0x10204000 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+		clock-names = "mclk", "hclk";
+		dmas = <&pdma 13>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	sfc: spi@1020c000 {
+		compatible = "rockchip,sfc";
+		reg = <0x1020c000 0x8000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru 479>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		status = "disabled";
+	};
+
 	sdmmc: mmc@10214000 {
 		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
@@ -408,6 +482,21 @@
 		status = "disabled";
 	};
 
+	i2s_2ch: i2s@10220000 {
+		compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s";
+		reg = <0x10220000 0x1000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&pdma 0>, <&pdma 1>;
+		dma-names = "tx", "rx";
+		rockchip,playback-channels = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_bus>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
 	nfc: nand-controller@10500000 {
 		compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc";
 		reg = <0x10500000 0x4000>;
@@ -477,6 +566,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
 		power-domains = <&power RK3128_PD_VIO>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
@@ -496,6 +586,18 @@
 		};
 	};
 
+	dphy: phy@20038000 {
+		compatible = "rockchip,rk3128-dsi-dphy";
+		reg = <0x20038000 0x4000>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPIPHY>;
+		clock-names = "ref", "pclk";
+		#phy-cells = <0>;
+		power-domains = <&power RK3128_PD_VIO>;
+		resets = <&cru SRST_MIPIPHY_P>;
+		reset-names = "apb";
+		status = "disabled";
+	};
+
 	timer0: timer@20044000 {
 		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
 		reg = <0x20044000 0x20>;
@@ -1104,6 +1206,32 @@
 			};
 		};
 
+		sfc {
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>,
+						<1 RK_PD1 3 &pcfg_pull_default>;
+			};
+
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>,
+						<1 RK_PD1 3 &pcfg_pull_default>,
+						<1 RK_PD2 3 &pcfg_pull_default>,
+						<1 RK_PD3 3 &pcfg_pull_default>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins = <2 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins = <2 RK_PA2 2 &pcfg_pull_default>;
+			};
+
+			sfc_cs1: sfc-cs1 {
+				rockchip,pins = <2 RK_PA3 2 &pcfg_pull_default>;
+			};
+		};
+
 		spdif {
 			spdif_tx: spdif-tx {
 				rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>;
diff --git a/dts/upstream/src/arm/rockchip/rk3xxx.dtsi b/dts/upstream/src/arm/rockchip/rk3xxx.dtsi
index f37137f298d..e6a78bcf916 100644
--- a/dts/upstream/src/arm/rockchip/rk3xxx.dtsi
+++ b/dts/upstream/src/arm/rockchip/rk3xxx.dtsi
@@ -194,17 +194,14 @@
 	};
 
 	emac: ethernet@10204000 {
-		compatible = "snps,arc-emac";
+		compatible = "rockchip,rk3066-emac";
 		reg = <0x10204000 0x3c>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-
-		rockchip,grf = <&grf>;
-
 		clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
 		clock-names = "hclk", "macref";
 		max-speed = <100>;
 		phy-mode = "rmii";
-
+		rockchip,grf = <&grf>;
 		status = "disabled";
 	};
 
diff --git a/dts/upstream/src/arm/rockchip/rv1126-edgeble-neu2-io.dts b/dts/upstream/src/arm/rockchip/rv1126-edgeble-neu2-io.dts
index 0c2396b8f8d..7707d1b0144 100644
--- a/dts/upstream/src/arm/rockchip/rv1126-edgeble-neu2-io.dts
+++ b/dts/upstream/src/arm/rockchip/rv1126-edgeble-neu2-io.dts
@@ -69,8 +69,7 @@
 
 &mdio {
 	phy: ethernet-phy@0 {
-		compatible = "ethernet-phy-id001c.c916",
-			     "ethernet-phy-ieee802.3-c22";
+		compatible = "ethernet-phy-id001c.c916";
 		reg = <0x0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&eth_phy_rst>;
diff --git a/dts/upstream/src/arm/st/stih407-family.dtsi b/dts/upstream/src/arm/st/stih407-family.dtsi
index 29302e74aa1..35a55aef7f4 100644
--- a/dts/upstream/src/arm/st/stih407-family.dtsi
+++ b/dts/upstream/src/arm/st/stih407-family.dtsi
@@ -33,7 +33,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
@@ -52,8 +52,9 @@
 			clock-latency = <100000>;
 			cpu0-supply = <&pwm_regulator>;
 			st,syscfg = <&syscfg_core 0x8e0>;
+			#cooling-cells = <2>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
@@ -66,6 +67,7 @@
 					    1200000 0
 					    800000  0
 					    500000  0>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git a/dts/upstream/src/arm/st/stih410.dtsi b/dts/upstream/src/arm/st/stih410.dtsi
index 29e95e9d322..a69231854f7 100644
--- a/dts/upstream/src/arm/st/stih410.dtsi
+++ b/dts/upstream/src/arm/st/stih410.dtsi
@@ -270,6 +270,7 @@
 			clock-names = "thermal";
 			clocks = <&clk_sysin>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
 		};
 
 		cec@94a087c {
diff --git a/dts/upstream/src/arm/st/stih418.dtsi b/dts/upstream/src/arm/st/stih418.dtsi
index b35b9b7a7cc..8fb8b3af5e4 100644
--- a/dts/upstream/src/arm/st/stih418.dtsi
+++ b/dts/upstream/src/arm/st/stih418.dtsi
@@ -6,23 +6,26 @@
 #include "stih418-clock.dtsi"
 #include "stih407-family.dtsi"
 #include "stih410-pinctrl.dtsi"
+#include <dt-bindings/thermal/thermal.h>
 / {
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
 			cpu-release-addr = <0x94100A4>;
+			#cooling-cells = <2>;
 		};
-		cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
 			cpu-release-addr = <0x94100A4>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -44,6 +47,38 @@
 		reset-names = "global", "port";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;  /* 250ms */
+			polling-delay = <1000>;         /* 1000ms */
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <95000>;  /* 95C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <85000>;  /* 85C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	soc {
 		rng11: rng@8a8a000 {
 			status = "disabled";
@@ -107,12 +142,13 @@
 			assigned-clock-rates = <200000000>;
 		};
 
-		thermal@91a0000 {
+		thermal: thermal@91a0000 {
 			compatible = "st,stih407-thermal";
 			reg = <0x91a0000 0x28>;
 			clock-names = "thermal";
 			clocks = <&clk_sysin>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
 		};
 	};
 };
diff --git a/dts/upstream/src/arm/st/stm32f429.dtsi b/dts/upstream/src/arm/st/stm32f429.dtsi
index 8efcda9ef8a..ad91b74ddd0 100644
--- a/dts/upstream/src/arm/st/stm32f429.dtsi
+++ b/dts/upstream/src/arm/st/stm32f429.dtsi
@@ -579,6 +579,7 @@
 		syscfg: syscon@40013800 {
 			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SYSCFG)>;
 		};
 
 		exti: interrupt-controller@40013c00 {
diff --git a/dts/upstream/src/arm/st/stm32mp13-pinctrl.dtsi b/dts/upstream/src/arm/st/stm32mp13-pinctrl.dtsi
index 32c5d8a1e06..c9f588a6509 100644
--- a/dts/upstream/src/arm/st/stm32mp13-pinctrl.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp13-pinctrl.dtsi
@@ -6,6 +6,14 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	/omit-if-no-ref/
+	adc1_pins_a: adc1-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */
+		};
+	};
+
+	/omit-if-no-ref/
 	adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
@@ -13,6 +21,241 @@
 		};
 	};
 
+	/omit-if-no-ref/
+	adc1_usb_cc_pins_b: adc1-usb-cc-pins-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 5, ANALOG)>, /* ADC1_INP2 */
+				 <STM32_PINMUX('F', 13, ANALOG)>; /* ADC1_INP11 */
+		};
+	};
+
+	/omit-if-no-ref/
+	dcmipp_pins_a: dcmi-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H',  8,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('G',  9,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('B',  7,  AF14)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('A',  9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('D',  0,  AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('G', 10,  AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E',  4,  AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('D', 11,  AF14)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D',  3,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B',  8,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 14,  AF13)>;/* DCMI_D7 */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	dcmipp_sleep_pins_a: dcmi-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H',  8,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('G',  9,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('B',  7,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('A',  9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('D',  0,  ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('G', 10,  ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E',  4,  ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('D', 11,  ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D',  3,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B',  8,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 14,  ANALOG)>;/* DCMI_D7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	eth1_rgmii_pins_a: eth1-rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 5, AF10)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 7, AF11)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('D', 7, AF10)>; /* ETH_RGMII_RX_CLK */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('A', 7, ANALOG)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('D', 7, ANALOG)>; /* ETH_RGMII_RX_CLK */
+		};
+	};
+
+	/omit-if-no-ref/
+	eth1_rmii_pins_a: eth1-rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('C', 1, AF10)>; /* ETH_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	eth1_rmii_sleep_pins_a: eth1-rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('C', 1, ANALOG)>; /* ETH_RMII_CRS_DV */
+		};
+	};
+
+	/omit-if-no-ref/
+	eth2_rgmii_pins_a: eth2-rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 11, AF10)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('G', 1, AF10)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 6, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('F', 6, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('G', 3, AF10)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 6, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('E', 2, AF10)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF12)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('A', 8, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 12, AF11)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('H', 11, AF11)>; /* ETH_RGMII_RX_CLK */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 6, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('A', 8, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 12, ANALOG)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('H', 11, ANALOG)>; /* ETH_RGMII_RX_CLK */
+		};
+	};
+
+	/omit-if-no-ref/
+	eth2_rmii_pins_a: eth2-rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 11, AF10)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('G', 8, AF13)>, /* ETH_RMII_ETHCK */
+				 <STM32_PINMUX('F', 6, AF11)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('B', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('E', 2, AF10)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('A', 12, AF11)>; /* ETH_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	eth2_rmii_sleep_pins_a: eth2-rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RMII_ETHCK */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* ETH_RMII_CRS_DV */
+		};
+	};
+
+	/omit-if-no-ref/
+	goodix_pins_a: goodix-0 {
+		/*
+		 * touchscreen reset needs to be configured
+		 * via the pinctrl not the driver (a pull-down resistor
+		 * has been soldered onto the reset line which forces
+		 * the touchscreen to reset state).
+		 */
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, GPIO)>;
+			output-high;
+			bias-pull-up;
+		};
+		/*
+		 * Interrupt line must have a pull-down resistor
+		 * in order to freeze the i2c address at 0x5D
+		 */
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 5, GPIO)>;
+			bias-pull-down;
+		};
+	};
+
+	/omit-if-no-ref/
 	i2c1_pins_a: i2c1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
@@ -23,6 +266,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	i2c1_sleep_pins_a: i2c1-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
@@ -30,6 +274,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	i2c5_pins_a: i2c5-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
@@ -40,6 +285,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	i2c5_sleep_pins_a: i2c5-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
@@ -47,6 +293,26 @@
 		};
 	};
 
+	/omit-if-no-ref/
+	i2c5_pins_b: i2c5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('E', 13, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	i2c5_sleep_pins_b: i2c5-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('E', 13, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
+	/omit-if-no-ref/
 	ltdc_pins_a: ltdc-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D',  9, AF13)>, /* LCD_CLK */
@@ -77,6 +343,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	ltdc_sleep_pins_a: ltdc-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_CLK */
@@ -104,6 +371,51 @@
 		};
 	};
 
+	/omit-if-no-ref/
+	m_can1_pins_a: m-can1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 10, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can1_sleep_pins_a: m_can1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 10, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('D', 0, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can2_pins_a: m-can2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 0, AF9)>; /* CAN2_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 0, AF9)>; /* CAN2_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	m_can2_sleep_pins_a: m_can2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 0, ANALOG)>, /* CAN2_TX */
+				 <STM32_PINMUX('E', 0, ANALOG)>; /* CAN2_RX */
+		};
+	};
+
+	/omit-if-no-ref/
 	mcp23017_pins_a: mcp23017-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G', 12, GPIO)>;
@@ -111,6 +423,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	pwm3_pins_a: pwm3-0 {
 		pins {
 			pinmux = <STM32_PINMUX('B', 1, AF2)>; /* TIM3_CH4 */
@@ -120,12 +433,14 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	pwm3_sleep_pins_a: pwm3-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('B', 1, ANALOG)>; /* TIM3_CH4 */
 		};
 	};
 
+	/omit-if-no-ref/
 	pwm4_pins_a: pwm4-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
@@ -135,12 +450,31 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	pwm4_sleep_pins_a: pwm4-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
 		};
 	};
 
+	/omit-if-no-ref/
+	pwm5_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 12, AF2)>; /* TIM5_CH3 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm5_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>; /* TIM5_CH3 */
+		};
+	};
+
+	/omit-if-no-ref/
 	pwm8_pins_a: pwm8-0 {
 		pins {
 			pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */
@@ -150,12 +484,31 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	pwm8_sleep_pins_a: pwm8-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('E', 5, ANALOG)>; /* TIM8_CH3 */
 		};
 	};
 
+	/omit-if-no-ref/
+	pwm13_pins_a: pwm13-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 6, AF9)>; /* TIM13_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	/omit-if-no-ref/
+	pwm13_sleep_pins_a: pwm13-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 6, ANALOG)>; /* TIM13_CH1 */
+		};
+	};
+
+	/omit-if-no-ref/
 	pwm14_pins_a: pwm14-0 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 9, AF9)>; /* TIM14_CH1 */
@@ -165,12 +518,107 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	pwm14_sleep_pins_a: pwm14-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 9, ANALOG)>; /* TIM14_CH1 */
 		};
 	};
 
+	/omit-if-no-ref/
+	qspi_clk_pins_a: qspi-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_bk1_pins_a: qspi-bk1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('D', 11, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('H', 7, AF13)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('H', 7, ANALOG)>; /* QSPI_BK1_IO3 */
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_cs1_pins_a: qspi-cs1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 2, AF9)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	/omit-if-no-ref/
+	qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 2, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai1a_pins_a: sai1a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, AF12)>, /* SAI1_SCK_A */
+				 <STM32_PINMUX('D', 6, AF6)>, /* SAI1_SD_A */
+				 <STM32_PINMUX('E', 11, AF6)>; /* SAI1_FS_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai1a_sleep_pins_a: sai1a-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* SAI1_SCK_A */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* SAI1_SD_A */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* SAI1_FS_A */
+		};
+	};
+
+	/omit-if-no-ref/
+	sai1b_pins_a: sai1b-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, AF6)>; /* SAI1_SD_B */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	sai1b_sleep_pins_a: sai1b-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* SAI1_SD_B */
+		};
+	};
+
+	/omit-if-no-ref/
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins {
 			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
@@ -184,6 +632,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
@@ -202,6 +651,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
@@ -213,6 +663,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	sdmmc1_clk_pins_a: sdmmc1-clk-0 {
 		pins {
 			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
@@ -222,6 +673,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
 		pins {
 			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
@@ -235,6 +687,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
@@ -253,6 +706,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
@@ -264,6 +718,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	sdmmc2_clk_pins_a: sdmmc2-clk-0 {
 		pins {
 			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
@@ -273,6 +728,80 @@
 		};
 	};
 
+	/omit-if-no-ref/
+	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, AF10)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('B', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	/omit-if-no-ref/
+	spi2_pins_a: spi2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF6)>, /* SPI2_SCK */
+				 <STM32_PINMUX('H', 10, AF6)>; /* SPI2_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF5)>; /* SPI2_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi2_sleep_pins_a: spi2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* SPI2_SCK */
+				 <STM32_PINMUX('B', 5, ANALOG)>, /* SPI2_MISO */
+				 <STM32_PINMUX('H', 10, ANALOG)>; /* SPI2_MOSI */
+		};
+	};
+
+	/omit-if-no-ref/
+	spi3_pins_a: spi3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 13, AF6)>, /* SPI3_SCK */
+				 <STM32_PINMUX('F', 1, AF5)>; /* SPI3_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF5)>; /* SPI3_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi3_sleep_pins_a: spi3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* SPI3_SCK */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* SPI3_MISO */
+				 <STM32_PINMUX('F', 1, ANALOG)>; /* SPI3_MOSI */
+		};
+	};
+
+	/omit-if-no-ref/
 	spi5_pins_a: spi5-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('H', 7, AF6)>, /* SPI5_SCK */
@@ -288,6 +817,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	spi5_sleep_pins_a: spi5-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('H', 7, ANALOG)>, /* SPI5_SCK */
@@ -296,6 +826,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	stm32g0_intn_pins_a: stm32g0-intn-0 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 2, GPIO)>;
@@ -303,6 +834,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	uart4_pins_a: uart4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
@@ -316,6 +848,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	uart4_idle_pins_a: uart4-idle-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */
@@ -326,6 +859,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	uart4_sleep_pins_a: uart4-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */
@@ -333,6 +867,84 @@
 		};
 	};
 
+	/omit-if-no-ref/
+	uart4_pins_b: uart4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 9, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_idle_pins_b: uart4-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 9, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart4_sleep_pins_b: uart4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 9, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, AF8)>, /* UART7_TX */
+				 <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 10, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('G', 7, AF8)>; /* UART7_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_idle_pins_a: uart7-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	uart7_sleep_pins_a: uart7-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* UART7_RTS */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* UART7_RX */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */
+		};
+	};
+
+	/omit-if-no-ref/
 	uart8_pins_a: uart8-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
@@ -346,6 +958,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	uart8_idle_pins_a: uart8-idle-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */
@@ -356,6 +969,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	uart8_sleep_pins_a: uart8-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */
@@ -363,6 +977,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	usart1_pins_a: usart1-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */
@@ -378,6 +993,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	usart1_idle_pins_a: usart1-idle-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
@@ -395,6 +1011,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	usart1_sleep_pins_a: usart1-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
@@ -404,6 +1021,40 @@
 		};
 	};
 
+	/omit-if-no-ref/
+	usart1_pins_b: usart1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, AF7)>; /* USART1_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 14, AF7)>; /* USART1_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_idle_pins_b: usart1-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* USART1_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 14, AF7)>; /* USART1_RX */
+			bias-pull-up;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart1_sleep_pins_b: usart1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('D', 14, ANALOG)>; /* USART1_RX */
+		};
+	};
+
+	/omit-if-no-ref/
 	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */
@@ -419,6 +1070,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	usart2_idle_pins_a: usart2-idle-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
@@ -436,6 +1088,7 @@
 		};
 	};
 
+	/omit-if-no-ref/
 	usart2_sleep_pins_a: usart2-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
@@ -444,4 +1097,48 @@
 				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
 		};
 	};
+
+	/omit-if-no-ref/
+	usart2_pins_b: usart2-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 11, AF1)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, AF3)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_idle_pins_b: usart2-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	usart2_sleep_pins_b: usart2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
 };
diff --git a/dts/upstream/src/arm/st/stm32mp131.dtsi b/dts/upstream/src/arm/st/stm32mp131.dtsi
index 6704ceef284..e1a764d269d 100644
--- a/dts/upstream/src/arm/st/stm32mp131.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp131.dtsi
@@ -979,6 +979,12 @@
 			ts_cal2: calib@5e {
 				reg = <0x5e 0x2>;
 			};
+			ethernet_mac1_address: mac1@e4 {
+				reg = <0xe4 0x6>;
+			};
+			ethernet_mac2_address: mac2@ea {
+				reg = <0xea 0x6>;
+			};
 		};
 
 		etzpc: bus@5c007000 {
@@ -1505,6 +1511,38 @@
 				status = "disabled";
 			};
 
+			ethernet1: ethernet@5800a000 {
+				compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+				reg = <0x5800a000 0x2000>;
+				reg-names = "stmmaceth";
+				interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+						      <&exti 68 1>;
+				interrupt-names = "macirq", "eth_wake_irq";
+				clock-names = "stmmaceth",
+					      "mac-clk-tx",
+					      "mac-clk-rx",
+					      "ethstp",
+					      "eth-ck";
+				clocks = <&rcc ETH1MAC>,
+					 <&rcc ETH1TX>,
+					 <&rcc ETH1RX>,
+					 <&rcc ETH1STP>,
+					 <&rcc ETH1CK_K>;
+				st,syscon = <&syscfg 0x4 0xff0000>;
+				snps,mixed-burst;
+				snps,pbl = <2>;
+				snps,axi-config = <&stmmac_axi_config_1>;
+				snps,tso;
+				access-controllers = <&etzpc 48>;
+				status = "disabled";
+
+				stmmac_axi_config_1: stmmac-axi-config {
+					snps,blen = <0 0 0 0 16 8 4>;
+					snps,rd_osr_lmt = <0x7>;
+					snps,wr_osr_lmt = <0x7>;
+				};
+			};
+
 			usbphyc: usbphyc@5a006000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/dts/upstream/src/arm/st/stm32mp133.dtsi b/dts/upstream/src/arm/st/stm32mp133.dtsi
index 3e394c8e58b..73e470019ce 100644
--- a/dts/upstream/src/arm/st/stm32mp133.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp133.dtsi
@@ -68,4 +68,35 @@
 			};
 		};
 	};
+
+	ethernet2: ethernet@5800e000 {
+		compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+		reg = <0x5800e000 0x2000>;
+		reg-names = "stmmaceth";
+		interrupts-extended = <&intc GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clock-names = "stmmaceth",
+			      "mac-clk-tx",
+			      "mac-clk-rx",
+			      "ethstp",
+			      "eth-ck";
+		clocks = <&rcc ETH2MAC>,
+			 <&rcc ETH2TX>,
+			 <&rcc ETH2RX>,
+			 <&rcc ETH2STP>,
+			 <&rcc ETH2CK_K>;
+		st,syscon = <&syscfg 0x4 0xff000000>;
+		snps,mixed-burst;
+		snps,pbl = <2>;
+		snps,axi-config = <&stmmac_axi_config_2>;
+		snps,tso;
+		access-controllers = <&etzpc 49>;
+		status = "disabled";
+
+		stmmac_axi_config_2: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,rd_osr_lmt = <0x7>;
+			snps,wr_osr_lmt = <0x7>;
+		};
+	};
 };
diff --git a/dts/upstream/src/arm/st/stm32mp135f-dhcor-dhsbc.dts b/dts/upstream/src/arm/st/stm32mp135f-dhcor-dhsbc.dts
new file mode 100644
index 00000000000..bacb70b4256
--- /dev/null
+++ b/dts/upstream/src/arm/st/stm32mp135f-dhcor-dhsbc.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2024 Marek Vasut <marex@denx.de>
+ *
+ * DHCOR STM32MP13 variant:
+ * DHCR-STM32MP135F-C100-R051-EE-F0409-SPI4-RTC-WBT-I-01LG
+ * DHCOR PCB number: 718-100 or newer
+ * DHSBC PCB number: 719-100 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
+#include "stm32mp135.dtsi"
+#include "stm32mp13xf.dtsi"
+#include "stm32mp13xx-dhcor-som.dtsi"
+
+/ {
+	model = "DH electronics STM32MP135F DHCOR DHSBC";
+	compatible = "dh,stm32mp135f-dhcor-dhsbc",
+		     "dh,stm32mp135f-dhcor-som",
+		     "st,stm32mp135";
+
+	aliases {
+		ethernet0 = &ethernet1;
+		ethernet1 = &ethernet2;
+		serial2 = &usart1;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&adc_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_pins_a &adc1_usb_cc_pins_b>;
+	vdda-supply = <&vdd_adc>;
+	vref-supply = <&vdd_adc>;
+	status = "okay";
+
+	adc1: adc@0 {
+		status = "okay";
+
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in2 & in11.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (5.1 + 47kOhms) * 5pF => 1.3us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 *
+		 * The pinmux pins must be set as ANALOG, use datasheet
+		 * DS13483 Table 7. STM32MP135C/F ball definitions to
+		 * find out which 'pin name' maps to which 'additional
+		 * functions', which lists the mapping between pin and
+		 * ADC channel. In this case, PA5 maps to ADC1_INP2 and
+		 * PF13 maps to ADC1_INP11 .
+		 */
+		channel@2 {
+			reg = <2>;
+			st,min-sample-time-ns = <5000>;
+		};
+
+		channel@11 {
+			reg = <11>;
+			st,min-sample-time-ns = <5000>;
+		};
+
+		/* Expansion connector: INP12:pin29 */
+		channel@12 {
+			reg = <12>;
+			st,min-sample-time-ns = <5000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&eth1_rgmii_pins_a>;
+	pinctrl-1 = <&eth1_rgmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	st,ext-phyclk;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		ethphy1: ethernet-phy@1 {
+			/* RTL8211F */
+			compatible = "ethernet-phy-id001c.c916";
+			interrupt-parent = <&gpiog>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+			reg = <1>;
+			reset-assert-us = <15000>;
+			reset-deassert-us = <55000>;
+			reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethernet2 {
+	phy-handle = <&ethphy2>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&eth2_rgmii_pins_a>;
+	pinctrl-1 = <&eth2_rgmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	st,ext-phyclk;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		ethphy2: ethernet-phy@1 {
+			/* RTL8211F */
+			compatible = "ethernet-phy-id001c.c916";
+			interrupt-parent = <&gpiog>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			reg = <1>;
+			reset-assert-us = <15000>;
+			reset-deassert-us = <55000>;
+			reset-gpios = <&gpiog 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpioa {
+	gpio-line-names = "", "", "", "",
+			  "", "DHSBC_USB_PWR_CC1", "", "",
+			  "", "", "", "DHSBC_nETH1_RST",
+			  "", "DHCOR_HW-CODING_0", "", "";
+};
+
+&gpiob {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "DHCOR_BT_HOST_WAKE",
+			  "", "", "", "",
+			  "", "DHSBC_nTPM_CS", "", "";
+};
+
+&gpioc {
+	gpio-line-names = "", "", "", "DHSBC_USB_5V_MEAS",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "",
+			  "", "DHCOR_RAM-CODING_0", "", "",
+			  "", "DHCOR_RAM-CODING_1", "", "",
+			  "", "", "", "";
+};
+
+&gpioe {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "DHSBC_nTPM_RST", "", "",
+			  "DHSBC_nTPM_PIRQ", "", "DHCOR_WL_HOST_WAKE", "";
+};
+
+&gpiof {
+	gpio-line-names = "", "", "DHSBC_USB_PWR_nFLT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "DHCOR_WL_REG_ON", "DHSBC_USB_PWR_CC2", "", "";
+};
+
+&gpiog {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "DHSBC_nETH2_RST", "DHCOR_BT_DEV_WAKE", "", "",
+			  "DHSBC_ETH1_INTB", "", "", "DHSBC_ETH2_INTB";
+};
+
+&gpioi {
+	gpio-line-names = "DHCOR_RTC_nINT", "DHCOR_HW-CODING_1",
+			  "DHCOR_BT_REG_ON", "DHCOR_PMIC_nINT",
+			  "DHSBC_BOOT0", "DHSBC_BOOT1",
+			  "DHSBC_BOOT2", "DHSBC_USB-C_DATA_VBUS";
+};
+
+&i2c1 { /* Expansion connector: SDA:pin27 SCL:pin28 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c5 { /* Expansion connector: SDA:pin3 SCL:pin5 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_b>;
+	pinctrl-1 = <&i2c5_sleep_pins_b>;
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&m_can1 { /* Expansion connector: TX:pin16 RX:pin18 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_a>;
+	pinctrl-1 = <&m_can1_sleep_pins_a>;
+	status = "okay";
+};
+
+&m_can2 { /* Expansion connector: TX:pin22 RX:pin26 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_pins_a>;
+	pinctrl-1 = <&m_can2_sleep_pins_a>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+	status = "okay";
+};
+
+&sai1 { /* Expansion connector: SCK-A:pin12 FS-A:pin35 SD-A:pin38 SD-B:pin40 */
+	clocks = <&rcc SAI1>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai1a_pins_a &sai1b_pins_a>;
+	pinctrl-1 = <&sai1a_sleep_pins_a &sai1b_sleep_pins_a>;
+};
+
+&scmi_voltd {
+	status = "disabled";
+};
+
+&spi2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi2_pins_a>;
+	pinctrl-1 = <&spi2_sleep_pins_a>;
+	cs-gpios = <&gpiob 13 0>;
+	status = "okay";
+
+	st33htph: tpm@0 {
+		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+	};
+};
+
+&spi3 { /* Expansion connector: MOSI:pin19 MISO:pin21 SCK:pin22 nCS:pin24 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi3_pins_a>;
+	pinctrl-1 = <&spi3_sleep_pins_a>;
+	cs-gpios = <&gpiof 3 0>;
+	status = "disabled";
+};
+
+&timers5 { /* Expansion connector: CH3:pin31 */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers13 { /* Expansion connector: CH1:pin32 */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm13_pins_a>;
+		pinctrl-1 = <&pwm13_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@12 {
+		status = "okay";
+	};
+};
+
+&usart1 { /* Expansion connector: RX:pin33 TX:pin37 */
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart1_pins_b>;
+	pinctrl-1 = <&usart1_sleep_pins_b>;
+	pinctrl-2 = <&usart1_idle_pins_b>;
+	status = "okay";
+};
+
+&usart2 { /* Expansion connector: RX:pin10 TX:pin8 RTS:pin11 CTS:pin36 */
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_b>;
+	pinctrl-1 = <&usart2_sleep_pins_b>;
+	pinctrl-2 = <&usart2_idle_pins_b>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	usb33d-supply = <&usb33>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+	connector {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vbus_sw>;
+	};
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		vbus-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		self-powered;
+		type = "micro";
+	};
+};
diff --git a/dts/upstream/src/arm/st/stm32mp135f-dk.dts b/dts/upstream/src/arm/st/stm32mp135f-dk.dts
index 567e53ad285..1af335a3999 100644
--- a/dts/upstream/src/arm/st/stm32mp135f-dk.dts
+++ b/dts/upstream/src/arm/st/stm32mp135f-dk.dts
@@ -19,6 +19,7 @@
 	compatible = "st,stm32mp135f-dk", "st,stm32mp135";
 
 	aliases {
+		ethernet0 = &ethernet1;
 		serial0 = &uart4;
 		serial1 = &usart1;
 		serial2 = &uart8;
@@ -29,6 +30,20 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		clk_mco1: clk-mco1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
 	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xc0000000 0x20000000>;
@@ -141,6 +156,45 @@
 	status = "okay";
 };
 
+&dcmipp {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcmipp_pins_a>;
+	pinctrl-1 = <&dcmipp_sleep_pins_a>;
+	status = "okay";
+
+	port {
+		dcmipp_0: endpoint {
+			remote-endpoint = <&mipid02_2>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <0>;
+		};
+	};
+};
+
+&ethernet1 {
+	status = "okay";
+	pinctrl-0 = <&eth1_rmii_pins_a>;
+	pinctrl-1 = <&eth1_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	phy-handle = <&phy0_eth1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0_eth1: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c131";
+			reg = <0>;
+			reset-gpios = <&mcp23017 9 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c1_pins_a>;
@@ -201,6 +255,76 @@
 	/* spare dmas for other usage */
 	/delete-property/dmas;
 	/delete-property/dma-names;
+
+	stmipi: csi2rx@14 {
+		compatible = "st,st-mipid02";
+		reg = <0x14>;
+		clocks = <&clk_mco1>;
+		clock-names = "xclk";
+		VDDE-supply = <&scmi_v1v8_periph>;
+		VDDIN-supply = <&scmi_v1v8_periph>;
+		reset-gpios = <&mcp23017 2 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+
+				mipid02_0: endpoint {
+					data-lanes = <1 2>;
+					lane-polarities = <0 0 0>;
+					remote-endpoint = <&gc2145_ep>;
+				};
+			};
+			port@2 {
+				reg = <2>;
+
+				mipid02_2: endpoint {
+					bus-width = <8>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					pclk-sample = <0>;
+					remote-endpoint = <&dcmipp_0>;
+				};
+			};
+		};
+	};
+
+	gc2145: camera@3c {
+		compatible = "galaxycore,gc2145";
+		reg = <0x3c>;
+		clocks = <&clk_ext_camera>;
+		iovdd-supply = <&scmi_v3v3_sw>;
+		avdd-supply = <&scmi_v3v3_sw>;
+		dvdd-supply = <&scmi_v3v3_sw>;
+		powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+		reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+		status = "okay";
+
+		port {
+			gc2145_ep: endpoint {
+				remote-endpoint = <&mipid02_0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <120000000 192000000 240000000>;
+			};
+		};
+	};
+
+	goodix: goodix-ts@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&goodix_pins_a>;
+		interrupt-parent = <&gpiof>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		AVDD28-supply = <&scmi_v3v3_sw>;
+		VDDIO-supply = <&scmi_v3v3_sw>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+		status = "okay" ;
+	};
 };
 
 &iwdg2 {
@@ -273,6 +397,7 @@
 	/delete-property/dma-names;
 	status = "disabled";
 	pwm {
+		/* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 func */
 		pinctrl-0 = <&pwm3_pins_a>;
 		pinctrl-1 = <&pwm3_sleep_pins_a>;
 		pinctrl-names = "default", "sleep";
@@ -288,6 +413,7 @@
 	/delete-property/dma-names;
 	status = "disabled";
 	pwm {
+		/* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 func */
 		pinctrl-0 = <&pwm4_pins_a>;
 		pinctrl-1 = <&pwm4_sleep_pins_a>;
 		pinctrl-names = "default", "sleep";
@@ -303,6 +429,7 @@
 	/delete-property/dma-names;
 	status = "disabled";
 	pwm {
+		/* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 func */
 		pinctrl-0 = <&pwm8_pins_a>;
 		pinctrl-1 = <&pwm8_sleep_pins_a>;
 		pinctrl-names = "default", "sleep";
@@ -316,6 +443,7 @@
 &timers14 {
 	status = "disabled";
 	pwm {
+		/* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 func */
 		pinctrl-0 = <&pwm14_pins_a>;
 		pinctrl-1 = <&pwm14_sleep_pins_a>;
 		pinctrl-names = "default", "sleep";
diff --git a/dts/upstream/src/arm/st/stm32mp13xx-dhcor-som.dtsi b/dts/upstream/src/arm/st/stm32mp13xx-dhcor-som.dtsi
new file mode 100644
index 00000000000..ddad6497775
--- /dev/null
+++ b/dts/upstream/src/arm/st/stm32mp13xx-dhcor-som.dtsi
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2024 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+#include <dt-bindings/regulator/st,stm32mp13-regulator.h>
+#include "stm32mp13-pinctrl.dtsi"
+
+/ {
+	model = "DH electronics STM32MP13xx DHCOR SoM";
+	compatible = "dh,stm32mp131a-dhcor-som",
+		     "st,stm32mp131";
+
+	aliases {
+		mmc0 = &sdmmc2;
+		mmc1 = &sdmmc1;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		rtc0 = &rv3032;
+		spi0 = &qspi;
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		optee@dd000000 {
+			reg = <0xdd000000 0x3000000>;
+			no-map;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
+	};
+
+	vin: vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioi 3 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&vin>;
+			ldo2-supply = <&vin>;
+			ldo3-supply = <&vin>;
+			ldo4-supply = <&vin>;
+			ldo5-supply = <&vin>;
+			ldo6-supply = <&vin>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcpu: buck1 { /* VDD_CPU_1V2 */
+				regulator-name = "vddcpu";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 { /* VDD_DDR_1V35 */
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 { /* VDD_3V3_1V8 */
+				regulator-name = "vdd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vddcore: buck4 { /* VDD_CORE_1V2 */
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_adc: ldo1 { /* VDD_ADC_1V8 */
+				regulator-name = "vdd_adc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			vdd_ldo2: ldo2 { /* LDO2_OUT_1V8 */
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vdd_ldo3: ldo3 { /* LDO3_OUT */
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO3 0>;
+			};
+
+			vdd_usb: ldo4 { /* VDD_USB_3V3 */
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 { /* VDD_SD_3V3_1V8 */
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+			};
+
+			vdd_sd2: ldo6 { /* VDD_SD2_3V3_1V8 */
+				regulator-name = "vdd_sd2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr { /* VREF_DDR_0V675 */
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost { /* BST_OUT_5V2 */
+				regulator-name = "bst_out";
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c256";	/* ST M24256 */
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+
+	rv3032: rtc@51 {
+		compatible = "microcrystal,rv3032";
+		reg = <0x51>;
+		interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+/* Console UART */
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_b>;
+	pinctrl-1 = <&uart4_sleep_pins_b>;
+	pinctrl-2 = <&uart4_idle_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+/* Bluetooth */
+&uart7 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-1 = <&uart7_sleep_pins_a>;
+	pinctrl-2 = <&uart7_idle_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt";
+		max-speed = <3000000>;
+		device-wakeup-gpios = <&gpiog 9 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* SDIO WiFi */
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&vdd>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {	/* muRata 1YN */
+		reg = <1>;
+		compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpioe>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+/* eMMC */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	bus-width = <8>;
+	mmc-ddr-3_3v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&vdd>;
+	vqmmc-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm/st/stm32mp151.dtsi b/dts/upstream/src/arm/st/stm32mp151.dtsi
index 90c5c72c87a..4f878ec102c 100644
--- a/dts/upstream/src/arm/st/stm32mp151.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp151.dtsi
@@ -50,6 +50,7 @@
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&intc>;
+		arm,no-tick-in-suspend;
 	};
 
 	clocks {
diff --git a/dts/upstream/src/arm/st/stm32mp157a-dk1-scmi.dts b/dts/upstream/src/arm/st/stm32mp157a-dk1-scmi.dts
index 306e1bc2a51..847b360f02f 100644
--- a/dts/upstream/src/arm/st/stm32mp157a-dk1-scmi.dts
+++ b/dts/upstream/src/arm/st/stm32mp157a-dk1-scmi.dts
@@ -62,6 +62,11 @@
 	reset-names = "mcu_rst", "hold_boot";
 };
 
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
diff --git a/dts/upstream/src/arm/st/stm32mp157c-dk2-scmi.dts b/dts/upstream/src/arm/st/stm32mp157c-dk2-scmi.dts
index 956da5f26c1..43280289759 100644
--- a/dts/upstream/src/arm/st/stm32mp157c-dk2-scmi.dts
+++ b/dts/upstream/src/arm/st/stm32mp157c-dk2-scmi.dts
@@ -68,6 +68,11 @@
 	reset-names = "mcu_rst", "hold_boot";
 };
 
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
diff --git a/dts/upstream/src/arm/st/stm32mp157c-ed1-scmi.dts b/dts/upstream/src/arm/st/stm32mp157c-ed1-scmi.dts
index 8e4b0db198c..6f27d794d27 100644
--- a/dts/upstream/src/arm/st/stm32mp157c-ed1-scmi.dts
+++ b/dts/upstream/src/arm/st/stm32mp157c-ed1-scmi.dts
@@ -67,6 +67,11 @@
 	reset-names = "mcu_rst", "hold_boot";
 };
 
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
diff --git a/dts/upstream/src/arm/st/stm32mp157c-ev1-scmi.dts b/dts/upstream/src/arm/st/stm32mp157c-ev1-scmi.dts
index 72b9cab2d99..6ae391bffee 100644
--- a/dts/upstream/src/arm/st/stm32mp157c-ev1-scmi.dts
+++ b/dts/upstream/src/arm/st/stm32mp157c-ev1-scmi.dts
@@ -72,6 +72,11 @@
 	reset-names = "mcu_rst", "hold_boot";
 };
 
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
diff --git a/dts/upstream/src/arm/st/stm32mp157c-osd32mp1-red.dts b/dts/upstream/src/arm/st/stm32mp157c-osd32mp1-red.dts
index 527c33be66c..36e6055b566 100644
--- a/dts/upstream/src/arm/st/stm32mp157c-osd32mp1-red.dts
+++ b/dts/upstream/src/arm/st/stm32mp157c-osd32mp1-red.dts
@@ -147,11 +147,6 @@
 	status = "okay";
 };
 
-&pwr_regulators {
-	vdd-supply = <&vdd>;
-	vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
 &rtc {
 	status = "okay";
 };
@@ -211,11 +206,3 @@
 &usbphyc {
 	status = "okay";
 };
-
-&usbphyc_port0 {
-	phy-supply = <&vdd_usb>;
-};
-
-&usbphyc_port1 {
-	phy-supply = <&vdd_usb>;
-};
diff --git a/dts/upstream/src/arm/st/stm32mp15xc-lxa-tac.dtsi b/dts/upstream/src/arm/st/stm32mp15xc-lxa-tac.dtsi
index cfaf8adde31..c87fd96cbd9 100644
--- a/dts/upstream/src/arm/st/stm32mp15xc-lxa-tac.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp15xc-lxa-tac.dtsi
@@ -379,11 +379,6 @@ baseboard_eeprom: &sip_eeprom {
 	};
 };
 
-&pwr_regulators {
-	vdd-supply = <&vdd>;
-	vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
 &rtc {
 	status = "okay";
 };
@@ -590,14 +585,6 @@ baseboard_eeprom: &sip_eeprom {
 	status = "okay";
 };
 
-&usbphyc_port0 {
-	phy-supply = <&vdd_usb>;
-};
-
-&usbphyc_port1 {
-	phy-supply = <&vdd_usb>;
-};
-
 &vrefbuf {
 	regulator-min-microvolt = <2500000>;
 	regulator-max-microvolt = <2500000>;
diff --git a/dts/upstream/src/arm/st/stm32mp15xx-osd32.dtsi b/dts/upstream/src/arm/st/stm32mp15xx-osd32.dtsi
index aeb71c41a73..2022a1fa31c 100644
--- a/dts/upstream/src/arm/st/stm32mp15xx-osd32.dtsi
+++ b/dts/upstream/src/arm/st/stm32mp15xx-osd32.dtsi
@@ -214,3 +214,16 @@
 &rng1 {
 	status = "okay";
 };
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/dts/upstream/src/arm/ti/davinci/da850-evm.dts b/dts/upstream/src/arm/ti/davinci/da850-evm.dts
index 6c5936278e7..1f5cd35f8b7 100644
--- a/dts/upstream/src/arm/ti/davinci/da850-evm.dts
+++ b/dts/upstream/src/arm/ti/davinci/da850-evm.dts
@@ -65,7 +65,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 480x272 {
+			timing0: timing-480x272 {
 				clock-frequency = <9000000>;
 				hactive = <480>;
 				vactive = <272>;
diff --git a/dts/upstream/src/arm/ti/omap/am335x-guardian.dts b/dts/upstream/src/arm/ti/omap/am335x-guardian.dts
index 56e5d954a49..4b070e634b2 100644
--- a/dts/upstream/src/arm/ti/omap/am335x-guardian.dts
+++ b/dts/upstream/src/arm/ti/omap/am335x-guardian.dts
@@ -74,7 +74,7 @@
 		pinctrl-1 = <&lcd_pins_sleep>;
 
 		display-timings {
-			320x240 {
+			timing-320x240 {
 				hactive         = <320>;
 				vactive         = <240>;
 				hback-porch     = <68>;
diff --git a/dts/upstream/src/arm/ti/omap/am335x-pdu001.dts b/dts/upstream/src/arm/ti/omap/am335x-pdu001.dts
index f38f5bff2b9..17574d0d052 100644
--- a/dts/upstream/src/arm/ti/omap/am335x-pdu001.dts
+++ b/dts/upstream/src/arm/ti/omap/am335x-pdu001.dts
@@ -67,7 +67,7 @@
 		};
 
 		display-timings {
-			240x320p16 {
+			timing-240x320p16 {
 				clock-frequency = <6500000>;
 				hactive = <240>;
 				vactive = <320>;
diff --git a/dts/upstream/src/arm/ti/omap/am335x-pepper.dts b/dts/upstream/src/arm/ti/omap/am335x-pepper.dts
index d5a4a21889d..e7d561a527f 100644
--- a/dts/upstream/src/arm/ti/omap/am335x-pepper.dts
+++ b/dts/upstream/src/arm/ti/omap/am335x-pepper.dts
@@ -202,7 +202,7 @@
 	};
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: 480x272 {
+		timing0: timing-480x272 {
 			clock-frequency = <18400000>;
 			hactive = <480>;
 			vactive = <272>;
diff --git a/dts/upstream/src/arm/ti/omap/am5729-beagleboneai.dts b/dts/upstream/src/arm/ti/omap/am5729-beagleboneai.dts
index eb1ec85aba2..e6a18954e44 100644
--- a/dts/upstream/src/arm/ti/omap/am5729-beagleboneai.dts
+++ b/dts/upstream/src/arm/ti/omap/am5729-beagleboneai.dts
@@ -196,7 +196,6 @@
 
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-		ti,enable-id-detection;
 		id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/dts/upstream/src/arm/ti/omap/omap3-n900.dts b/dts/upstream/src/arm/ti/omap/omap3-n900.dts
index 07c5b963af7..4bde3342bb9 100644
--- a/dts/upstream/src/arm/ti/omap/omap3-n900.dts
+++ b/dts/upstream/src/arm/ti/omap/omap3-n900.dts
@@ -781,7 +781,7 @@
 
 		mount-matrix =	 "-1",  "0",  "0",
 				  "0",  "1",  "0",
-				  "0",  "0",  "1";
+				  "0",  "0",  "-1";
 	};
 
 	cam1: camera@3e {
diff --git a/dts/upstream/src/arm/vt8500/vt8500-bv07.dts b/dts/upstream/src/arm/vt8500/vt8500-bv07.dts
index e9f55bd30bd..38a2da5e2c5 100644
--- a/dts/upstream/src/arm/vt8500/vt8500-bv07.dts
+++ b/dts/upstream/src/arm/vt8500/vt8500-bv07.dts
@@ -16,7 +16,7 @@
 	bits-per-pixel = <16>;
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: 800x480 {
+		timing0: timing-800x480 {
 			clock-frequency = <0>; /* unused but required */
 			hactive = <800>;
 			vactive = <480>;
diff --git a/dts/upstream/src/arm/vt8500/vt8500.dtsi b/dts/upstream/src/arm/vt8500/vt8500.dtsi
index b7e09eff5bb..f23cb5ee11a 100644
--- a/dts/upstream/src/arm/vt8500/vt8500.dtsi
+++ b/dts/upstream/src/arm/vt8500/vt8500.dtsi
@@ -115,7 +115,7 @@
 			interrupts = <43>;
 		};
 
-		uhci@d8007b00 {
+		usb@d8007b00 {
 			compatible = "platform-uhci";
 			reg = <0xd8007b00 0x200>;
 			interrupts = <43>;
diff --git a/dts/upstream/src/arm/vt8500/wm8505-ref.dts b/dts/upstream/src/arm/vt8500/wm8505-ref.dts
index 2d77c087676..8ce9e2ef0a8 100644
--- a/dts/upstream/src/arm/vt8500/wm8505-ref.dts
+++ b/dts/upstream/src/arm/vt8500/wm8505-ref.dts
@@ -16,7 +16,7 @@
 	bits-per-pixel = <32>;
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: 800x480 {
+		timing0: timing-800x480 {
 			clock-frequency = <0>; /* unused but required */
 			hactive = <800>;
 			vactive = <480>;
diff --git a/dts/upstream/src/arm/vt8500/wm8505.dtsi b/dts/upstream/src/arm/vt8500/wm8505.dtsi
index 168cd12b07b..d9e1280372c 100644
--- a/dts/upstream/src/arm/vt8500/wm8505.dtsi
+++ b/dts/upstream/src/arm/vt8500/wm8505.dtsi
@@ -213,7 +213,7 @@
 			interrupts = <1>;
 		};
 
-		uhci@d8007300 {
+		usb@d8007300 {
 			compatible = "platform-uhci";
 			reg = <0xd8007300 0x200>;
 			interrupts = <0>;
diff --git a/dts/upstream/src/arm/vt8500/wm8650-mid.dts b/dts/upstream/src/arm/vt8500/wm8650-mid.dts
index f6a42149a0a..7977b6c1e8e 100644
--- a/dts/upstream/src/arm/vt8500/wm8650-mid.dts
+++ b/dts/upstream/src/arm/vt8500/wm8650-mid.dts
@@ -17,7 +17,7 @@
 
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: 800x480 {
+		timing0: timing-800x480 {
 			clock-frequency = <0>; /* unused but required */
 			hactive = <800>;
 			vactive = <480>;
diff --git a/dts/upstream/src/arm/vt8500/wm8650.dtsi b/dts/upstream/src/arm/vt8500/wm8650.dtsi
index bc057b6f7d1..35d12d77efc 100644
--- a/dts/upstream/src/arm/vt8500/wm8650.dtsi
+++ b/dts/upstream/src/arm/vt8500/wm8650.dtsi
@@ -185,7 +185,7 @@
 			interrupts = <43>;
 		};
 
-		uhci@d8007b00 {
+		usb@d8007b00 {
 			compatible = "platform-uhci";
 			reg = <0xd8007b00 0x200>;
 			interrupts = <43>;
diff --git a/dts/upstream/src/arm/vt8500/wm8750.dtsi b/dts/upstream/src/arm/vt8500/wm8750.dtsi
index 33aeb37491f..b292f85d4e6 100644
--- a/dts/upstream/src/arm/vt8500/wm8750.dtsi
+++ b/dts/upstream/src/arm/vt8500/wm8750.dtsi
@@ -257,13 +257,13 @@
 			interrupts = <26>;
 		};
 
-		uhci@d8007b00 {
+		usb@d8007b00 {
 			compatible = "platform-uhci";
 			reg = <0xd8007b00 0x200>;
 			interrupts = <26>;
 		};
 
-		uhci@d8008d00 {
+		usb@d8008d00 {
 			compatible = "platform-uhci";
 			reg = <0xd8008d00 0x200>;
 			interrupts = <26>;
diff --git a/dts/upstream/src/arm/vt8500/wm8850-w70v2.dts b/dts/upstream/src/arm/vt8500/wm8850-w70v2.dts
index c7a6fe0ce48..5d409323b10 100644
--- a/dts/upstream/src/arm/vt8500/wm8850-w70v2.dts
+++ b/dts/upstream/src/arm/vt8500/wm8850-w70v2.dts
@@ -28,7 +28,7 @@
 	bits-per-pixel = <16>;
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: 800x480 {
+		timing0: timing-800x480 {
 			clock-frequency = <0>; /* unused but required */
 			hactive = <800>;
 			vactive = <480>;
diff --git a/dts/upstream/src/arm/vt8500/wm8850.dtsi b/dts/upstream/src/arm/vt8500/wm8850.dtsi
index 65c9271050e..c61717ebb4f 100644
--- a/dts/upstream/src/arm/vt8500/wm8850.dtsi
+++ b/dts/upstream/src/arm/vt8500/wm8850.dtsi
@@ -244,13 +244,13 @@
 			interrupts = <26>;
 		};
 
-		uhci@d8007b00 {
+		usb@d8007b00 {
 			compatible = "platform-uhci";
 			reg = <0xd8007b00 0x200>;
 			interrupts = <26>;
 		};
 
-		uhci@d8008d00 {
+		usb@d8008d00 {
 			compatible = "platform-uhci";
 			reg = <0xd8008d00 0x200>;
 			interrupts = <26>;
diff --git a/dts/upstream/src/arm64/airoha/en7581-evb.dts b/dts/upstream/src/arm64/airoha/en7581-evb.dts
new file mode 100644
index 00000000000..cf58e43dd5b
--- /dev/null
+++ b/dts/upstream/src/arm64/airoha/en7581-evb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7581.dtsi"
+
+/ {
+	model = "Airoha EN7581 Evaluation Board";
+	compatible = "airoha,en7581-evb", "airoha,en7581";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x0 0x80200000 0x0 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+};
diff --git a/dts/upstream/src/arm64/airoha/en7581.dtsi b/dts/upstream/src/arm64/airoha/en7581.dtsi
new file mode 100644
index 00000000000..55eb1762fb1
--- /dev/null
+++ b/dts/upstream/src/arm64/airoha/en7581.dtsi
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		npu-binary@84000000 {
+			no-map;
+			reg = <0x0 0x84000000 0x0 0xa00000>;
+		};
+
+		npu-flag@84b0000 {
+			no-map;
+			reg = <0x0 0x84b00000 0x0 0x100000>;
+		};
+
+		npu-pkt@85000000 {
+			no-map;
+			reg = <0x0 0x85000000 0x0 0x1a00000>;
+		};
+
+		npu-phyaddr@86b00000 {
+			no-map;
+			reg = <0x0 0x86b00000 0x0 0x100000>;
+		};
+
+		npu-rxdesc@86d00000 {
+			no-map;
+			reg = <0x0 0x86d00000 0x0 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@9000000 {
+			compatible = "arm,gic-v3";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x09000000 0x0 0x20000>,
+			      <0x0 0x09080000 0x0 0x80000>,
+			      <0x0 0x09400000 0x0 0x2000>,
+			      <0x0 0x09500000 0x0 0x2000>,
+			      <0x0 0x09600000 0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		uart1: serial@1fbf0000 {
+			compatible = "ns16550";
+			reg = <0x0 0x1fbf0000 0x0 0x30>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <1843200>;
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64-lts.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64-lts.dts
index 596a2590743..709fe650a36 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64-lts.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64-lts.dts
@@ -5,7 +5,7 @@
 #include "sun50i-a64-sopine-baseboard.dts"
 
 / {
-	model = "Pine64 LTS";
+	model = "Pine64 PINE A64 LTS";
 	compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
 		     "allwinner,sun50i-a64";
 
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64-plus.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
index b54099b654c..026d843cd7e 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
@@ -4,7 +4,7 @@
 #include "sun50i-a64-pine64.dts"
 
 / {
-	model = "Pine64+";
+	model = "Pine64 PINE A64+";
 	compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
 
 	/* TODO: Camera, touchscreen, etc. */
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64.dts
index 2accb5ddf78..09e71fd6078 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-pine64.dts
@@ -9,7 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Pine64";
+	model = "Pine64 PINE A64";
 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
 
 	aliases {
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinebook.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinebook.dts
index 6c65d5bc16b..379c2c8466f 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinebook.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinebook.dts
@@ -13,7 +13,7 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	model = "Pinebook";
+	model = "Pine64 Pinebook";
 	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
 	chassis-type = "laptop";
 
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab-early-adopter.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab-early-adopter.dts
index 6265360ce62..86cc85eb3d4 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab-early-adopter.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab-early-adopter.dts
@@ -9,7 +9,7 @@
 #include "sun50i-a64-pinetab.dts"
 
 / {
-	model = "PineTab, Early Adopter's version";
+	model = "Pine64 PineTab Early Adopter";
 	compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64";
 };
 
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab.dts
index c6007df9993..f5fb1ee32da 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-pinetab.dts
@@ -14,7 +14,7 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	model = "PineTab, Development Sample";
+	model = "Pine64 PineTab Developer Sample";
 	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
 	chassis-type = "tablet";
 
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts b/dts/upstream/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts
index 5e66ce1a334..be2347c8f26 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -8,7 +8,7 @@
 #include "sun50i-a64-sopine.dtsi"
 
 / {
-	model = "SoPine with baseboard";
+	model = "Pine64 SOPINE on Baseboard carrier board";
 	compatible = "pine64,sopine-baseboard", "pine64,sopine",
 		     "allwinner,sun50i-a64";
 
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-a64.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-a64.dtsi
index ce4aa44c335..e868ca5ae75 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-a64.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-a64.dtsi
@@ -51,10 +51,16 @@
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu1: cpu@1 {
@@ -62,10 +68,16 @@
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu2: cpu@2 {
@@ -73,10 +85,16 @@
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu3: cpu@3 {
@@ -84,16 +102,25 @@
 			device_type = "cpu";
 			reg = <3>;
 			enable-method = "psci";
-			next-level-cache = <&L2>;
 			clocks = <&ccu CLK_CPUX>;
 			clock-names = "cpu";
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
-		L2: l2-cache {
+		l2_cache: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts b/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts
index 66fe03910d5..066fbeff8bf 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -8,7 +8,7 @@
 /delete-node/ &reg_gmac_3v3;
 
 / {
-	model = "Pine H64 model B";
+	model = "Pine64 PINE H64 Model B";
 	compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
 
 	wifi_pwrseq: pwrseq {
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64.dts b/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64.dts
index 3910393be1f..c8b27555287 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h6-pine-h64.dts
@@ -9,7 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Pine H64 model A";
+	model = "Pine64 PINE H64 Model A";
 	compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
 
 	aliases {
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h6.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-h6.dtsi
index 8a8591c4e7d..2301c59b41b 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h6.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h6.dtsi
@@ -29,6 +29,13 @@
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu1: cpu@1 {
@@ -39,6 +46,13 @@
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu2: cpu@2 {
@@ -49,6 +63,13 @@
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu3: cpu@3 {
@@ -59,6 +80,22 @@
 			clocks = <&ccu CLK_CPUX>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi
index aca22a7f019..dd10aaf472b 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h616-cpu-opp.dtsi
@@ -11,7 +11,7 @@
 			opp-hz = /bits/ 64 <480000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x1f>;
+			opp-supported-hw = <0x3f>;
 		};
 
 		opp-600000000 {
@@ -25,7 +25,7 @@
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x0d>;
+			opp-supported-hw = <0x2d>;
 		};
 
 		opp-792000000 {
@@ -50,8 +50,16 @@
 			opp-microvolt-speed2 = <950000>;
 			opp-microvolt-speed3 = <950000>;
 			opp-microvolt-speed4 = <1020000>;
+			opp-microvolt-speed5 = <900000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x1f>;
+			opp-supported-hw = <0x3f>;
+		};
+
+		opp-1032000000 {
+			opp-hz = /bits/ 64 <1032000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-supported-hw = <0x20>;
 		};
 
 		opp-1104000000 {
@@ -59,8 +67,9 @@
 			opp-microvolt-speed0 = <1000000>;
 			opp-microvolt-speed2 = <1000000>;
 			opp-microvolt-speed3 = <1000000>;
+			opp-microvolt-speed5 = <950000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x0d>;
+			opp-supported-hw = <0x2d>;
 		};
 
 		opp-1200000000 {
@@ -70,8 +79,9 @@
 			opp-microvolt-speed2 = <1050000>;
 			opp-microvolt-speed3 = <1050000>;
 			opp-microvolt-speed4 = <1100000>;
+			opp-microvolt-speed5 = <1020000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x1f>;
+			opp-supported-hw = <0x3f>;
 		};
 
 		opp-1320000000 {
@@ -85,15 +95,16 @@
 			opp-hz = /bits/ 64 <1416000000>;
 			opp-microvolt = <1100000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x0d>;
+			opp-supported-hw = <0x2d>;
 		};
 
 		opp-1512000000 {
 			opp-hz = /bits/ 64 <1512000000>;
 			opp-microvolt-speed1 = <1100000>;
 			opp-microvolt-speed3 = <1100000>;
+			opp-microvolt-speed5 = <1160000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-			opp-supported-hw = <0x0a>;
+			opp-supported-hw = <0x2a>;
 		};
 	};
 };
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h616.dtsi b/dts/upstream/src/arm64/allwinner/sun50i-h616.dtsi
index 921d5f61d8d..b29ce732131 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h616.dtsi
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h616.dtsi
@@ -27,6 +27,13 @@
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu1: cpu@1 {
@@ -36,6 +43,13 @@
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu2: cpu@2 {
@@ -45,6 +59,13 @@
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
 		};
 
 		cpu3: cpu@3 {
@@ -54,6 +75,22 @@
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache>;
+		};
+
+		l2_cache: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 
@@ -113,6 +150,16 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		crypto: crypto@1904000 {
+			compatible = "allwinner,sun50i-h616-crypto";
+			reg = <0x01904000 0x800>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>,
+				 <&ccu CLK_MBUS_CE>, <&rtc CLK_IOSC>;
+			clock-names = "bus", "mod", "ram", "trng";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
 		syscon: syscon@3000000 {
 			compatible = "allwinner,sun50i-h616-system-control";
 			reg = <0x03000000 0x1000>;
@@ -306,6 +353,15 @@
 			#interrupt-cells = <3>;
 		};
 
+		iommu: iommu@30f0000 {
+			compatible = "allwinner,sun50i-h616-iommu";
+			reg = <0x030f0000 0x10000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_IOMMU>;
+			resets = <&ccu RST_BUS_IOMMU>;
+			#iommu-cells = <1>;
+		};
+
 		mmc0: mmc@4020000 {
 			compatible = "allwinner,sun50i-h616-mmc",
 				     "allwinner,sun50i-a100-mmc";
@@ -589,6 +645,17 @@
 			status = "disabled";
 		};
 
+		gpadc: adc@5070000 {
+			compatible = "allwinner,sun50i-h616-gpadc",
+				     "allwinner,sun20i-d1-gpadc";
+			reg = <0x05070000 0x400>;
+			clocks = <&ccu CLK_BUS_GPADC>;
+			resets = <&ccu RST_BUS_GPADC>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#io-channel-cells = <1>;
+		};
+
 		ths: thermal-sensor@5070400 {
 			compatible = "allwinner,sun50i-h616-ths";
 			reg = <0x05070400 0x400>;
@@ -602,6 +669,16 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		lradc: lradc@5070800 {
+			compatible = "allwinner,sun50i-h616-lradc",
+				     "allwinner,sun50i-r329-lradc";
+			reg = <0x05070800 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_KEYADC>;
+			resets = <&ccu RST_BUS_KEYADC>;
+			status = "disabled";
+		};
+
 		usbotg: usb@5100000 {
 			compatible = "allwinner,sun50i-h616-musb",
 				     "allwinner,sun8i-h3-musb";
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
index ee30584b6ad..afb49e65859 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "sun50i-h616.dtsi"
-
+#include "sun50i-h616-cpu-opp.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -221,7 +221,7 @@
 			reg_dcdc1: dcdc1 {
 				regulator-always-on;
 				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1100000>;
+				regulator-max-microvolt = <1160000>;
 				regulator-name = "vdd-cpu";
 			};
 
diff --git a/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts b/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
index 63036256917..ff453336eab 100644
--- a/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
+++ b/dts/upstream/src/arm64/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
@@ -9,6 +9,78 @@
 / {
 	model = "Anbernic RG35XX H";
 	compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700";
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_pin>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <4096 0>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <0 4096>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <0 4096>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <4096 0>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "left_y", "right_x", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&gpadc 0>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&pio 8 1 GPIO_ACTIVE_LOW>,
+			    <&pio 8 2 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+};
+
+&gpadc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	channel@0 {
+		reg = <0>;
+	};
 };
 
 &gpio_keys_gamepad {
@@ -34,3 +106,10 @@
 &ohci1 {
 	status = "okay";
 };
+
+&pio {
+	joy_mux_pin: joy-mux-pin {
+		pins = "PI0";
+		function = "gpio_out";
+	};
+};
diff --git a/dts/upstream/src/arm64/altera/socfpga_stratix10.dtsi b/dts/upstream/src/arm64/altera/socfpga_stratix10.dtsi
index cbbc53c4792..0def0b0daaf 100644
--- a/dts/upstream/src/arm64/altera/socfpga_stratix10.dtsi
+++ b/dts/upstream/src/arm64/altera/socfpga_stratix10.dtsi
@@ -34,6 +34,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x0>;
 		};
 
@@ -41,6 +42,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x1>;
 		};
 
@@ -48,6 +50,7 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x2>;
 		};
 
@@ -55,8 +58,15 @@
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "psci";
+			next-level-cache = <&l2_shared>;
 			reg = <0x3>;
 		};
+
+		l2_shared: cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
 	};
 
 	firmware {
diff --git a/dts/upstream/src/arm64/altera/socfpga_stratix10_socdk.dts b/dts/upstream/src/arm64/altera/socfpga_stratix10_socdk.dts
index 26173f0b005..4eee777ef1a 100644
--- a/dts/upstream/src/arm64/altera/socfpga_stratix10_socdk.dts
+++ b/dts/upstream/src/arm64/altera/socfpga_stratix10_socdk.dts
@@ -180,8 +180,6 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
diff --git a/dts/upstream/src/arm64/altera/socfpga_stratix10_socdk_nand.dts b/dts/upstream/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
index 81d0e914a77..7c53cb9621e 100644
--- a/dts/upstream/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
+++ b/dts/upstream/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
@@ -169,8 +169,6 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
diff --git a/dts/upstream/src/arm64/amlogic/amlogic-a4.dtsi b/dts/upstream/src/arm64/amlogic/amlogic-a4.dtsi
index 73ca1d7eed8..de10e7aebf2 100644
--- a/dts/upstream/src/arm64/amlogic/amlogic-a4.dtsi
+++ b/dts/upstream/src/arm64/amlogic/amlogic-a4.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "amlogic-a4-common.dtsi"
+#include <dt-bindings/power/amlogic,a4-pwrc.h>
 / {
 	cpus {
 		#address-cells = <2>;
@@ -37,4 +38,13 @@
 			enable-method = "psci";
 		};
 	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,a4-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
 };
diff --git a/dts/upstream/src/arm64/amlogic/amlogic-c3.dtsi b/dts/upstream/src/arm64/amlogic/amlogic-c3.dtsi
index 32a754fe799..f8fb060c49a 100644
--- a/dts/upstream/src/arm64/amlogic/amlogic-c3.dtsi
+++ b/dts/upstream/src/arm64/amlogic/amlogic-c3.dtsi
@@ -111,8 +111,7 @@
 			};
 
 			gpio_intc: interrupt-controller@4080 {
-				compatible = "amlogic,meson-gpio-intc",
-					     "amlogic,c3-gpio-intc";
+				compatible = "amlogic,c3-gpio-intc", "amlogic,meson-gpio-intc";
 				reg = <0x0 0x4080 0x0 0x0020>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
diff --git a/dts/upstream/src/arm64/amlogic/meson-a1-ad402.dts b/dts/upstream/src/arm64/amlogic/meson-a1-ad402.dts
index 4bc30af0584..0d92f5253b6 100644
--- a/dts/upstream/src/arm64/amlogic/meson-a1-ad402.dts
+++ b/dts/upstream/src/arm64/amlogic/meson-a1-ad402.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "meson-a1.dtsi"
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "amlogic,ad402", "amlogic,a1";
@@ -83,6 +84,50 @@
 		vin-supply = <&vddao_3v3>;
 		regulator-always-on;
 	};
+
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			sustainable-power = <130>;
+
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			soc_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
 
 /* Bluetooth HCI H4 */
diff --git a/dts/upstream/src/arm64/amlogic/meson-a1.dtsi b/dts/upstream/src/arm64/amlogic/meson-a1.dtsi
index c03e207ea6c..e5366d4239b 100644
--- a/dts/upstream/src/arm64/amlogic/meson-a1.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-a1.dtsi
@@ -28,6 +28,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -36,6 +37,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
@@ -398,6 +400,17 @@
 				power-domains = <&pwrc PWRC_USB_ID>;
 			};
 
+			cpu_temp: temperature-sensor@4c00 {
+				compatible = "amlogic,a1-cpu-thermal";
+				reg = <0x0 0x4c00 0x0 0x50>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_TS>;
+				assigned-clocks = <&clkc_periphs CLKID_TS>;
+				assigned-clock-rates = <500000>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
 			hwrng: rng@5118 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x0 0x5118 0x0 0x4>;
@@ -419,7 +432,7 @@
 				clock-names = "fixpll_in", "hifipll_in";
 			};
 
-			sd_emmc: sd@10000 {
+			sd_emmc: mmc@10000 {
 				compatible = "amlogic,meson-axg-mmc";
 				reg = <0x0 0x10000 0x0 0x800>;
 				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -453,7 +466,6 @@
 			assigned-clocks = <&clkc_periphs CLKID_USB_BUS>;
 			assigned-clock-rates = <64000000>;
 			resets = <&reset RESET_USBCTRL>;
-			reset-name = "usb_ctrl";
 
 			dr_mode = "otg";
 
diff --git a/dts/upstream/src/arm64/amlogic/meson-axg.dtsi b/dts/upstream/src/arm64/amlogic/meson-axg.dtsi
index 6d12b760b90..e9b22868983 100644
--- a/dts/upstream/src/arm64/amlogic/meson-axg.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-axg.dtsi
@@ -25,10 +25,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_A";
-		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -36,10 +36,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_B";
-		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -47,10 +47,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_C";
-		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12-common.dtsi b/dts/upstream/src/arm64/amlogic/meson-g12-common.dtsi
index b058ed78faf..d08c9779701 100644
--- a/dts/upstream/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-g12-common.dtsi
@@ -215,6 +215,11 @@
 				#sound-dai-cells = <0>;
 				status = "disabled";
 
+				assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+						  <&clkc CLKID_HDMI>;
+				assigned-clock-parents = <&xtal>, <0>;
+				assigned-clock-rates = <0>, <24000000>;
+
 				/* VPU VENC Input */
 				hdmi_tx_venc_port: port@0 {
 					reg = <0>;
@@ -987,7 +992,7 @@
 						mux {
 							groups = "spdif_out_h";
 							function = "spdif_out";
-							drive-strength-microamp = <500>;
+							drive-strength-microamp = <3000>;
 							bias-disable;
 						};
 					};
@@ -996,7 +1001,7 @@
 						mux {
 							groups = "spdif_out_a11";
 							function = "spdif_out";
-							drive-strength-microamp = <500>;
+							drive-strength-microamp = <3000>;
 							bias-disable;
 						};
 					};
@@ -1005,7 +1010,7 @@
 						mux {
 							groups = "spdif_out_a13";
 							function = "spdif_out";
-							drive-strength-microamp = <500>;
+							drive-strength-microamp = <3000>;
 							bias-disable;
 						};
 					};
@@ -1741,9 +1746,6 @@
 				compatible = "amlogic,meson-gx-ao-sysctrl",
 					     "simple-mfd", "syscon";
 				reg = <0x0 0x0 0x0 0x100>;
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges = <0x0 0x0 0x0 0x0 0x0 0x100>;
 
 				clkc_AO: clock-controller {
 					compatible = "amlogic,meson-g12a-aoclkc";
@@ -1752,278 +1754,278 @@
 					clocks = <&xtal>, <&clkc CLKID_CLK81>;
 					clock-names = "xtal", "mpeg-clk";
 				};
+			};
 
-				ao_pinctrl: pinctrl {
-					compatible = "amlogic,meson-g12a-aobus-pinctrl";
-					#address-cells = <2>;
-					#size-cells = <2>;
-					ranges;
+			ao_pinctrl: pinctrl@14 {
+				compatible = "amlogic,meson-g12a-aobus-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio_ao: bank@14 {
+					reg = <0x0 0x14 0x0 0x8>,
+					      <0x0 0x1c 0x0 0x8>,
+					      <0x0 0x24 0x0 0x14>;
+					reg-names = "mux",
+						    "ds",
+						    "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&ao_pinctrl 0 0 15>;
+				};
 
-					gpio_ao: bank@14 {
-						reg = <0x0 0x14 0x0 0x8>,
-						      <0x0 0x1c 0x0 0x8>,
-						      <0x0 0x24 0x0 0x14>;
-						reg-names = "mux",
-							    "ds",
-							    "gpio";
-						gpio-controller;
-						#gpio-cells = <2>;
-						gpio-ranges = <&ao_pinctrl 0 0 15>;
+				i2c_ao_sck_pins: i2c_ao_sck_pins {
+					mux {
+						groups = "i2c_ao_sck";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					i2c_ao_sck_pins: i2c_ao_sck_pins {
-						mux {
-							groups = "i2c_ao_sck";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				i2c_ao_sda_pins: i2c_ao_sda {
+					mux {
+						groups = "i2c_ao_sda";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					i2c_ao_sda_pins: i2c_ao_sda {
-						mux {
-							groups = "i2c_ao_sda";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				i2c_ao_sck_e_pins: i2c_ao_sck_e {
+					mux {
+						groups = "i2c_ao_sck_e";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					i2c_ao_sck_e_pins: i2c_ao_sck_e {
-						mux {
-							groups = "i2c_ao_sck_e";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				i2c_ao_sda_e_pins: i2c_ao_sda_e {
+					mux {
+						groups = "i2c_ao_sda_e";
+						function = "i2c_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					i2c_ao_sda_e_pins: i2c_ao_sda_e {
-						mux {
-							groups = "i2c_ao_sda_e";
-							function = "i2c_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				mclk0_ao_pins: mclk0-ao {
+					mux {
+						groups = "mclk0_ao";
+						function = "mclk0_ao";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					mclk0_ao_pins: mclk0-ao {
-						mux {
-							groups = "mclk0_ao";
-							function = "mclk0_ao";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_din0_pins: tdm-ao-b-din0 {
+					mux {
+						groups = "tdm_ao_b_din0";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_din0_pins: tdm-ao-b-din0 {
-						mux {
-							groups = "tdm_ao_b_din0";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				spdif_ao_out_pins: spdif-ao-out {
+					mux {
+						groups = "spdif_ao_out";
+						function = "spdif_ao_out";
+						drive-strength-microamp = <3000>;
+						bias-disable;
 					};
+				};
 
-					spdif_ao_out_pins: spdif-ao-out {
-						mux {
-							groups = "spdif_ao_out";
-							function = "spdif_ao_out";
-							drive-strength-microamp = <500>;
-							bias-disable;
-						};
+				tdm_ao_b_din1_pins: tdm-ao-b-din1 {
+					mux {
+						groups = "tdm_ao_b_din1";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_din1_pins: tdm-ao-b-din1 {
-						mux {
-							groups = "tdm_ao_b_din1";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_din2_pins: tdm-ao-b-din2 {
+					mux {
+						groups = "tdm_ao_b_din2";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_din2_pins: tdm-ao-b-din2 {
-						mux {
-							groups = "tdm_ao_b_din2";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
+					mux {
+						groups = "tdm_ao_b_dout0";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
-						mux {
-							groups = "tdm_ao_b_dout0";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
+					mux {
+						groups = "tdm_ao_b_dout1";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
-						mux {
-							groups = "tdm_ao_b_dout1";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
-					};
-
-					tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
-						mux {
-							groups = "tdm_ao_b_dout2";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
+					mux {
+						groups = "tdm_ao_b_dout2";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_fs_pins: tdm-ao-b-fs {
-						mux {
-							groups = "tdm_ao_b_fs";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_fs_pins: tdm-ao-b-fs {
+					mux {
+						groups = "tdm_ao_b_fs";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
-						mux {
-							groups = "tdm_ao_b_sclk";
-							function = "tdm_ao_b";
-							bias-disable;
-							drive-strength-microamp = <3000>;
-						};
+				tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
+					mux {
+						groups = "tdm_ao_b_sclk";
+						function = "tdm_ao_b";
+						bias-disable;
+						drive-strength-microamp = <3000>;
 					};
+				};
 
-					tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
-						mux {
-							groups = "tdm_ao_b_slv_fs";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
+					mux {
+						groups = "tdm_ao_b_slv_fs";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
-						mux {
-							groups = "tdm_ao_b_slv_sclk";
-							function = "tdm_ao_b";
-							bias-disable;
-						};
+				tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
+					mux {
+						groups = "tdm_ao_b_slv_sclk";
+						function = "tdm_ao_b";
+						bias-disable;
 					};
+				};
 
-					uart_ao_a_pins: uart-a-ao {
-						mux {
-							groups = "uart_ao_a_tx",
-								 "uart_ao_a_rx";
-							function = "uart_ao_a";
-							bias-disable;
-						};
+				uart_ao_a_pins: uart-a-ao {
+					mux {
+						groups = "uart_ao_a_tx",
+							 "uart_ao_a_rx";
+						function = "uart_ao_a";
+						bias-disable;
 					};
+				};
 
-					uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
-						mux {
-							groups = "uart_ao_a_cts",
-								 "uart_ao_a_rts";
-							function = "uart_ao_a";
-							bias-disable;
-						};
+				uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
+					mux {
+						groups = "uart_ao_a_cts",
+							 "uart_ao_a_rts";
+						function = "uart_ao_a";
+						bias-disable;
 					};
+				};
 
-					uart_ao_b_2_3_pins: uart-ao-b-2-3 {
-						mux {
-							groups = "uart_ao_b_tx_2",
-								 "uart_ao_b_rx_3";
-							function = "uart_ao_b";
-							bias-disable;
-						};
+				uart_ao_b_2_3_pins: uart-ao-b-2-3 {
+					mux {
+						groups = "uart_ao_b_tx_2",
+							 "uart_ao_b_rx_3";
+						function = "uart_ao_b";
+						bias-disable;
 					};
+				};
 
-					uart_ao_b_8_9_pins: uart-ao-b-8-9 {
-						mux {
-							groups = "uart_ao_b_tx_8",
-								 "uart_ao_b_rx_9";
-							function = "uart_ao_b";
-							bias-disable;
-						};
+				uart_ao_b_8_9_pins: uart-ao-b-8-9 {
+					mux {
+						groups = "uart_ao_b_tx_8",
+							 "uart_ao_b_rx_9";
+						function = "uart_ao_b";
+						bias-disable;
 					};
+				};
 
-					uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
-						mux {
-							groups = "uart_ao_b_cts",
-								 "uart_ao_b_rts";
-							function = "uart_ao_b";
-							bias-disable;
-						};
+				uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
+					mux {
+						groups = "uart_ao_b_cts",
+							 "uart_ao_b_rts";
+						function = "uart_ao_b";
+						bias-disable;
 					};
+				};
 
-					pwm_a_e_pins: pwm-a-e {
-						mux {
-							groups = "pwm_a_e";
-							function = "pwm_a_e";
-							bias-disable;
-						};
+				pwm_a_e_pins: pwm-a-e {
+					mux {
+						groups = "pwm_a_e";
+						function = "pwm_a_e";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_a_pins: pwm-ao-a {
-						mux {
-							groups = "pwm_ao_a";
-							function = "pwm_ao_a";
-							bias-disable;
-						};
+				pwm_ao_a_pins: pwm-ao-a {
+					mux {
+						groups = "pwm_ao_a";
+						function = "pwm_ao_a";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_b_pins: pwm-ao-b {
-						mux {
-							groups = "pwm_ao_b";
-							function = "pwm_ao_b";
-							bias-disable;
-						};
+				pwm_ao_b_pins: pwm-ao-b {
+					mux {
+						groups = "pwm_ao_b";
+						function = "pwm_ao_b";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_c_4_pins: pwm-ao-c-4 {
-						mux {
-							groups = "pwm_ao_c_4";
-							function = "pwm_ao_c";
-							bias-disable;
-						};
+				pwm_ao_c_4_pins: pwm-ao-c-4 {
+					mux {
+						groups = "pwm_ao_c_4";
+						function = "pwm_ao_c";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_c_6_pins: pwm-ao-c-6 {
-						mux {
-							groups = "pwm_ao_c_6";
-							function = "pwm_ao_c";
-							bias-disable;
-						};
+				pwm_ao_c_6_pins: pwm-ao-c-6 {
+					mux {
+						groups = "pwm_ao_c_6";
+						function = "pwm_ao_c";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_d_5_pins: pwm-ao-d-5 {
-						mux {
-							groups = "pwm_ao_d_5";
-							function = "pwm_ao_d";
-							bias-disable;
-						};
+				pwm_ao_d_5_pins: pwm-ao-d-5 {
+					mux {
+						groups = "pwm_ao_d_5";
+						function = "pwm_ao_d";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_d_10_pins: pwm-ao-d-10 {
-						mux {
-							groups = "pwm_ao_d_10";
-							function = "pwm_ao_d";
-							bias-disable;
-						};
+				pwm_ao_d_10_pins: pwm-ao-d-10 {
+					mux {
+						groups = "pwm_ao_d_10";
+						function = "pwm_ao_d";
+						bias-disable;
 					};
+				};
 
-					pwm_ao_d_e_pins: pwm-ao-d-e {
-						mux {
-							groups = "pwm_ao_d_e";
-							function = "pwm_ao_d";
-						};
+				pwm_ao_d_e_pins: pwm-ao-d-e {
+					mux {
+						groups = "pwm_ao_d_e";
+						function = "pwm_ao_d";
 					};
+				};
 
-					remote_input_ao_pins: remote-input-ao {
-						mux {
-							groups = "remote_ao_input";
-							function = "remote_ao_input";
-							bias-disable;
-						};
+				remote_input_ao_pins: remote-input-ao {
+					mux {
+						groups = "remote_ao_input";
+						function = "remote_ao_input";
+						bias-disable;
 					};
 				};
 			};
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12.dtsi b/dts/upstream/src/arm64/amlogic/meson-g12.dtsi
index e732df3f311..664912d1bea 100644
--- a/dts/upstream/src/arm64/amlogic/meson-g12.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-g12.dtsi
@@ -363,6 +363,10 @@
 	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
 &vpu {
 	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
 };
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12a-u200.dts b/dts/upstream/src/arm64/amlogic/meson-g12a-u200.dts
index 3da7922d83f..0e239939ade 100644
--- a/dts/upstream/src/arm64/amlogic/meson-g12a-u200.dts
+++ b/dts/upstream/src/arm64/amlogic/meson-g12a-u200.dts
@@ -24,7 +24,6 @@
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
-		#sound-dai-cells = <0>;
 		sound-name-prefix = "10U2";
 	};
 
@@ -374,6 +373,7 @@
 };
 
 &acodec {
+	AVDD-supply = <&vddao_1v8>;
 	status = "okay";
 };
 
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12b-bananapi.dtsi b/dts/upstream/src/arm64/amlogic/meson-g12b-bananapi.dtsi
index 4b8db872bbf..6a346cb86a5 100644
--- a/dts/upstream/src/arm64/amlogic/meson-g12b-bananapi.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-g12b-bananapi.dtsi
@@ -44,13 +44,6 @@
 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
 	};
 
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		#cooling-cells = <2>;
-		cooling-levels = <0 120 170 220>;
-		pwms = <&pwm_cd 1 40000 0>;
-	};
-
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -374,13 +367,6 @@
 	clock-names = "clkin0";
 };
 
-&pwm_cd {
-	status = "okay";
-	pinctrl-0 = <&pwm_d_x6_pins>;
-	pinctrl-names = "default";
-	pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>;
-};
-
 &pwm_ef {
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12b-dreambox-one.dts b/dts/upstream/src/arm64/amlogic/meson-g12b-dreambox-one.dts
new file mode 100644
index 00000000000..ecfa1c683dd
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/meson-g12b-dreambox-one.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-dreambox.dtsi"
+
+/ {
+	compatible = "dream,dreambox-one", "amlogic,s922x", "amlogic,g12b";
+	model = "Dreambox One";
+};
+
+&sd_emmc_a {
+	sd-uhs-sdr12;
+};
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12b-dreambox-two.dts b/dts/upstream/src/arm64/amlogic/meson-g12b-dreambox-two.dts
new file mode 100644
index 00000000000..df0d71983c3
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/meson-g12b-dreambox-two.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-dreambox.dtsi"
+
+/ {
+	compatible = "dream,dreambox-two", "amlogic,s922x", "amlogic,g12b";
+	model = "Dreambox Two";
+};
+
+&sd_emmc_a {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12b-dreambox.dtsi b/dts/upstream/src/arm64/amlogic/meson-g12b-dreambox.dtsi
new file mode 100644
index 00000000000..3a24c241155
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/meson-g12b-dreambox.dtsi
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	cvbs-connector {
+		status = "disabled";
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOA_11 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "DREAMBOX";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-dreambox";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi b/dts/upstream/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
index d80dd9a3da3..86eb8111223 100644
--- a/dts/upstream/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
@@ -31,6 +31,30 @@
 		enable-active-high;
 	};
 
+	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
+	usb-hub {
+		dr_mode = "host";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 2.0 hub on port 1 */
+		hub_2_0: hub@1 {
+			compatible = "usb5e3,610";
+			reg = <1>;
+			peer-hub = <&hub_3_0>;
+			vdd-supply = <&usb_pwr_en>;
+		};
+
+		/* 3.0 hub on port 4 */
+		hub_3_0: hub@2 {
+			compatible = "usb5e3,620";
+			reg = <2>;
+			peer-hub = <&hub_2_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+	};
+
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "ODROID-N2";
@@ -234,18 +258,6 @@
 		"PIN_3",  /* GPIOX_17 */
 		"PIN_5",  /* GPIOX_18 */
 		"PIN_36"; /* GPIOX_19 */
-	/*
-	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub-hog {
-		gpio-hog;
-		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
 };
 
 &i2c3 {
diff --git a/dts/upstream/src/arm64/amlogic/meson-g12b-radxa-zero2.dts b/dts/upstream/src/arm64/amlogic/meson-g12b-radxa-zero2.dts
index 890f5bfebb0..8445701100d 100644
--- a/dts/upstream/src/arm64/amlogic/meson-g12b-radxa-zero2.dts
+++ b/dts/upstream/src/arm64/amlogic/meson-g12b-radxa-zero2.dts
@@ -33,6 +33,13 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 64 128 192 255>;
+		pwms = <&pwm_AO_ab 0 40000 0>;
+	};
+
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		poll-interval = <100>;
@@ -286,6 +293,23 @@
 	clock-latency = <50000>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_active>;
+			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &frddr_a {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/dts/upstream/src/arm64/amlogic/meson-gxbb-odroidc2.dts
index c431986e6a3..c37cc6b036c 100644
--- a/dts/upstream/src/arm64/amlogic/meson-gxbb-odroidc2.dts
+++ b/dts/upstream/src/arm64/amlogic/meson-gxbb-odroidc2.dts
@@ -408,6 +408,6 @@
 		compatible = "usb5e3,610";
 		reg = <1>;
 		vdd-supply = <&p5v0>;
-		reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git a/dts/upstream/src/arm64/amlogic/meson-gxbb.dtsi b/dts/upstream/src/arm64/amlogic/meson-gxbb.dtsi
index 12ef6e81c8b..ed00e67e692 100644
--- a/dts/upstream/src/arm64/amlogic/meson-gxbb.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-gxbb.dtsi
@@ -311,10 +311,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
+	clocks = <&clkc CLKID_HDMI>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {
diff --git a/dts/upstream/src/arm64/amlogic/meson-gxl-s905x-vero4k.dts b/dts/upstream/src/arm64/amlogic/meson-gxl-s905x-vero4k.dts
new file mode 100644
index 00000000000..de996e930b8
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/meson-gxl-s905x-vero4k.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "osmc,vero4k", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "OSMC Vero 4K";
+
+	reserved-memory {
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-standby {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		sound-name-prefix = "DIT";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "VERO4K";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLP",
+				"AU2 INR", "ACODEC LORP",
+				"AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-5 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/amlogic/meson-gxl.dtsi b/dts/upstream/src/arm64/amlogic/meson-gxl.dtsi
index 17bcfa4702e..f58d1790de1 100644
--- a/dts/upstream/src/arm64/amlogic/meson-gxl.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-gxl.dtsi
@@ -323,10 +323,16 @@
 		 <&reset RESET_HDMI_SYSTEM_RESET>,
 		 <&reset RESET_HDMI_TX>;
 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
+	clocks = <&clkc CLKID_HDMI>,
+		 <&clkc CLKID_HDMI_PCLK>,
 		 <&clkc CLKID_GCLK_VENCI_INT0>;
 	clock-names = "isfr", "iahb", "venci";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+
+	assigned-clocks = <&clkc CLKID_HDMI_SEL>,
+			  <&clkc CLKID_HDMI>;
+	assigned-clock-parents = <&xtal>, <0>;
+	assigned-clock-rates = <0>, <24000000>;
 };
 
 &sysctrl {
diff --git a/dts/upstream/src/arm64/amlogic/meson-gxlx-s905l-p271.dts b/dts/upstream/src/arm64/amlogic/meson-gxlx-s905l-p271.dts
new file mode 100644
index 00000000000..1221f454513
--- /dev/null
+++ b/dts/upstream/src/arm64/amlogic/meson-gxlx-s905l-p271.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p271", "amlogic,s905l", "amlogic,meson-gxlx";
+	model = "Amlogic Meson GXLX (S905L) P271 Development Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	sound {
+		model = "P271";
+	};
+};
+
+&apb {
+	mali: gpu@c0000 {
+		/* Mali 450-MP2 */
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1";
+	};
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc";
+};
+
+&usb {
+	dr_mode = "host";
+};
+
+&vdec {
+	compatible = "amlogic,gxlx-vdec", "amlogic,gx-vdec";
+};
diff --git a/dts/upstream/src/arm64/amlogic/meson-s4.dtsi b/dts/upstream/src/arm64/amlogic/meson-s4.dtsi
index 10896f9df68..b686eacb966 100644
--- a/dts/upstream/src/arm64/amlogic/meson-s4.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-s4.dtsi
@@ -312,6 +312,160 @@
 					};
 				};
 
+				pwm_a_pins1: pwm-a-pins1 {
+					mux {
+						groups = "pwm_a_d";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_pins2: pwm-a-pins2 {
+					mux {
+						groups = "pwm_a_x";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_pins1: pwm-b-pins1 {
+					mux {
+						groups = "pwm_b_d";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_pins2: pwm-b-pins2 {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_pins1: pwm-c-pins1 {
+					mux {
+						groups = "pwm_c_d";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_pins2: pwm-c-pins2 {
+					mux {
+						groups = "pwm_c_x";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_pins1: pwm-d-pins1 {
+					mux {
+						groups = "pwm_d_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_pins2: pwm-d-pins2 {
+					mux {
+						groups = "pwm_d_h";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins1: pwm-e-pins1 {
+					mux {
+						groups = "pwm_e_x";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_e_pins2: pwm-e-pins2 {
+					mux {
+						groups = "pwm_e_z";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_pins1: pwm-f-pins1 {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_f_pins2: pwm-f-pins2 {
+					mux {
+						groups = "pwm_f_z";
+						function = "pwm_f";
+					};
+				};
+
+				pwm_g_pins1: pwm-g-pins1 {
+					mux {
+						groups = "pwm_g_d";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_g_pins2: pwm-g-pins2 {
+					mux {
+						groups = "pwm_g_z";
+						function = "pwm_g";
+					};
+				};
+
+				pwm_h_pins: pwm-h-pins {
+					mux {
+						groups = "pwm_h";
+						function = "pwm_h";
+					};
+				};
+
+				pwm_i_pins1: pwm-i-pins1 {
+					mux {
+						groups = "pwm_i_d";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_i_pins2: pwm-i-pins2 {
+					mux {
+						groups = "pwm_i_h";
+						function = "pwm_i";
+					};
+				};
+
+				pwm_j_pins: pwm-j-pins {
+					mux {
+						groups = "pwm_j";
+						function = "pwm_j";
+					};
+				};
+
+				pwm_a_hiz_pins: pwm-a-hiz-pins {
+					mux {
+						groups = "pwm_a_hiz";
+						function = "pwm_a_hiz";
+					};
+				};
+
+				pwm_b_hiz_pins: pwm-b-hiz-pins {
+					mux {
+						groups = "pwm_b_hiz";
+						function = "pwm_b_hiz";
+					};
+				};
+
+				pwm_c_hiz_pins: pwm-c-hiz-pins {
+					mux {
+						groups = "pwm_c_hiz";
+						function = "pwm_c_hiz";
+					};
+				};
+
+				pwm_g_hiz_pins: pwm-g-hiz-pins {
+					mux {
+						groups = "pwm_g_hiz";
+						function = "pwm_g_hiz";
+					};
+				};
+
 				spicc0_pins_x: spicc0-pins_x {
 					mux {
 						groups = "spi_a_mosi_x",
@@ -399,6 +553,51 @@
 				status = "disabled";
 			};
 
+			pwm_ab: pwm@58000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x58000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_A>,
+					 <&clkc_periphs CLKID_PWM_B>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@5a000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5a000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_C>,
+					 <&clkc_periphs CLKID_PWM_D>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@5c000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5c000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_E>,
+					 <&clkc_periphs CLKID_PWM_F>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_gh: pwm@5e000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x5e000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_G>,
+					 <&clkc_periphs CLKID_PWM_H>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ij: pwm@60000 {
+				compatible = "amlogic,meson-s4-pwm";
+				reg = <0x0 0x60000 0x0 0x24>;
+				clocks = <&clkc_periphs CLKID_PWM_I>,
+					 <&clkc_periphs CLKID_PWM_J>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			i2c0: i2c@66000 {
 				compatible = "amlogic,meson-axg-i2c";
 				reg = <0x0 0x66000 0x0 0x20>;
diff --git a/dts/upstream/src/arm64/amlogic/meson-sm1.dtsi b/dts/upstream/src/arm64/amlogic/meson-sm1.dtsi
index 643f94d9d08..97e4b52066d 100644
--- a/dts/upstream/src/arm64/amlogic/meson-sm1.dtsi
+++ b/dts/upstream/src/arm64/amlogic/meson-sm1.dtsi
@@ -17,10 +17,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_A";
-		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -28,10 +28,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_B";
-		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -39,10 +39,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_C";
-		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -275,8 +275,7 @@
 		};
 
 		tdmin_a: audio-controller@300 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x300 0x0 0x40>;
 			sound-name-prefix = "TDMIN_A";
 			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
@@ -291,8 +290,7 @@
 		};
 
 		tdmin_b: audio-controller@340 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x340 0x0 0x40>;
 			sound-name-prefix = "TDMIN_B";
 			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
@@ -307,8 +305,7 @@
 		};
 
 		tdmin_c: audio-controller@380 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x380 0x0 0x40>;
 			sound-name-prefix = "TDMIN_C";
 			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
@@ -323,8 +320,7 @@
 		};
 
 		tdmin_lb: audio-controller@3c0 {
-			compatible = "amlogic,sm1-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,sm1-tdmin";
 			reg = <0x0 0x3c0 0x0 0x40>;
 			sound-name-prefix = "TDMIN_LB";
 			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
@@ -339,7 +335,7 @@
 		};
 
 		spdifin: audio-controller@400 {
-			compatible = "amlogic,g12a-spdifin",
+			compatible = "amlogic,sm1-spdifin",
 				     "amlogic,axg-spdifin";
 			reg = <0x0 0x400 0x0 0x30>;
 			#sound-dai-cells = <0>;
@@ -353,7 +349,7 @@
 		};
 
 		spdifout_a: audio-controller@480 {
-			compatible = "amlogic,g12a-spdifout",
+			compatible = "amlogic,sm1-spdifout",
 				     "amlogic,axg-spdifout";
 			reg = <0x0 0x480 0x0 0x50>;
 			#sound-dai-cells = <0>;
@@ -518,6 +514,10 @@
 		     "amlogic,meson-gpio-intc";
 };
 
+&hdmi_tx {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
 &pcie {
 	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
 };
diff --git a/dts/upstream/src/arm64/apm/apm-merlin.dts b/dts/upstream/src/arm64/apm/apm-merlin.dts
index 6e05cf1a3df..b1160780a2a 100644
--- a/dts/upstream/src/arm64/apm/apm-merlin.dts
+++ b/dts/upstream/src/arm64/apm/apm-merlin.dts
@@ -32,7 +32,7 @@
 	};
 
 	poweroff_mbox: poweroff_mbox@10548000 {
-		compatible = "syscon";
+		compatible = "apm,merlin-poweroff-mailbox", "syscon";
 		reg = <0x0 0x10548000 0x0 0x30>;
 	};
 
diff --git a/dts/upstream/src/arm64/apm/apm-mustang.dts b/dts/upstream/src/arm64/apm/apm-mustang.dts
index e7644cddf06..2ef65879674 100644
--- a/dts/upstream/src/arm64/apm/apm-mustang.dts
+++ b/dts/upstream/src/arm64/apm/apm-mustang.dts
@@ -32,7 +32,7 @@
 	};
 
 	poweroff_mbox: poweroff_mbox@10548000 {
-		compatible = "syscon";
+		compatible = "apm,mustang-poweroff-mailbox", "syscon";
 		reg = <0x0 0x10548000 0x0 0x30>;
 	};
 
diff --git a/dts/upstream/src/arm64/arm/corstone1000-fvp.dts b/dts/upstream/src/arm64/arm/corstone1000-fvp.dts
index 901a7fc8330..abd01356299 100644
--- a/dts/upstream/src/arm64/arm/corstone1000-fvp.dts
+++ b/dts/upstream/src/arm64/arm/corstone1000-fvp.dts
@@ -21,7 +21,7 @@
 		reg-io-width = <2>;
 	};
 
-	vmmc_v3_3d: fixed_v3_3d {
+	vmmc_v3_3d: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc_supply";
 		regulator-min-microvolt = <3300000>;
diff --git a/dts/upstream/src/arm64/arm/corstone1000.dtsi b/dts/upstream/src/arm64/arm/corstone1000.dtsi
index 6ad7829f9e2..bb9b96fb531 100644
--- a/dts/upstream/src/arm64/arm/corstone1000.dtsi
+++ b/dts/upstream/src/arm64/arm/corstone1000.dtsi
@@ -60,14 +60,14 @@
 		cache-sets = <1024>;
 	};
 
-	refclk100mhz: refclk100mhz {
+	refclk100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "apb_pclk";
 	};
 
-	smbclk: refclk24mhzx2 {
+	smbclk: clock-48000000 {
 		/* Reference 24MHz clock x 2 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -83,7 +83,7 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	uartclk: uartclk {
+	uartclk: clock-50000000 {
 		/* UART clock - 50MHz */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
diff --git a/dts/upstream/src/arm64/arm/foundation-v8.dtsi b/dts/upstream/src/arm64/arm/foundation-v8.dtsi
index 7b41537731a..93f1e7c026b 100644
--- a/dts/upstream/src/arm64/arm/foundation-v8.dtsi
+++ b/dts/upstream/src/arm64/arm/foundation-v8.dtsi
@@ -99,21 +99,21 @@
 		timeout-sec = <30>;
 	};
 
-	v2m_clk24mhz: clk24mhz {
+	v2m_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "v2m:clk24mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "v2m:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
diff --git a/dts/upstream/src/arm64/arm/fvp-base-revc.dts b/dts/upstream/src/arm64/arm/fvp-base-revc.dts
index 60472d65a35..85f1c15cc65 100644
--- a/dts/upstream/src/arm64/arm/fvp-base-revc.dts
+++ b/dts/upstream/src/arm64/arm/fvp-base-revc.dts
@@ -243,6 +243,7 @@
 		iommu-map = <0x0 &smmu 0x0 0x10000>;
 
 		dma-coherent;
+		ats-supported;
 	};
 
 	smmu: iommu@2b400000 {
diff --git a/dts/upstream/src/arm64/arm/juno-base.dtsi b/dts/upstream/src/arm64/arm/juno-base.dtsi
index 98ed2b329ed..055764d0b9e 100644
--- a/dts/upstream/src/arm64/arm/juno-base.dtsi
+++ b/dts/upstream/src/arm64/arm/juno-base.dtsi
@@ -663,7 +663,6 @@
 		dma-coherent;
 		/* The SMMU is only really of interest to bare-metal hypervisors */
 		/* iommus = <&smmu_gpu 0>; */
-		status = "disabled";
 	};
 
 	sram: sram@2e000000 {
diff --git a/dts/upstream/src/arm64/arm/juno-clocks.dtsi b/dts/upstream/src/arm64/arm/juno-clocks.dtsi
index 2870b5eeb19..6d7d88e9591 100644
--- a/dts/upstream/src/arm64/arm/juno-clocks.dtsi
+++ b/dts/upstream/src/arm64/arm/juno-clocks.dtsi
@@ -8,35 +8,35 @@
  */
 / {
 	/* SoC fixed clocks */
-	soc_uartclk: refclk7372800hz {
+	soc_uartclk: clock-7372800 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <7372800>;
 		clock-output-names = "juno:uartclk";
 	};
 
-	soc_usb48mhz: clk48mhz {
+	soc_usb48mhz: clock-48000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 		clock-output-names = "clk48mhz";
 	};
 
-	soc_smc50mhz: clk50mhz {
+	soc_smc50mhz: clock-50000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 		clock-output-names = "smc_clk";
 	};
 
-	soc_refclk100mhz: refclk100mhz {
+	soc_refclk100mhz: clock-100000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "apb_pclk";
 	};
 
-	soc_faxiclk: refclk400mhz {
+	soc_faxiclk: clock-400000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <400000000>;
diff --git a/dts/upstream/src/arm64/arm/juno-motherboard.dtsi b/dts/upstream/src/arm64/arm/juno-motherboard.dtsi
index be42932f7e2..ffa4ba4f1fb 100644
--- a/dts/upstream/src/arm64/arm/juno-motherboard.dtsi
+++ b/dts/upstream/src/arm64/arm/juno-motherboard.dtsi
@@ -8,35 +8,35 @@
  */
 
 / {
-	mb_clk24mhz: clk24mhz {
+	mb_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "juno_mb:clk24mhz";
 	};
 
-	mb_clk25mhz: clk25mhz {
+	mb_clk25mhz: clock-25000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 		clock-output-names = "juno_mb:clk25mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "juno_mb:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "juno_mb:refclk32khz";
 	};
 
-	mb_fixed_3v3: mcc-sb-3v3 {
+	mb_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "MCC_SB_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -158,7 +158,8 @@
 				};
 
 				apbregs@10000 {
-					compatible = "syscon", "simple-mfd";
+					compatible = "arm,juno-fpga-apb-regs",
+						     "syscon", "simple-mfd";
 					reg = <0x010000 0x1000>;
 					ranges = <0x0 0x10000 0x1000>;
 					#address-cells = <1>;
diff --git a/dts/upstream/src/arm64/arm/rtsm_ve-motherboard.dtsi b/dts/upstream/src/arm64/arm/rtsm_ve-motherboard.dtsi
index ba8beef3fe9..66b1b74d27d 100644
--- a/dts/upstream/src/arm64/arm/rtsm_ve-motherboard.dtsi
+++ b/dts/upstream/src/arm64/arm/rtsm_ve-motherboard.dtsi
@@ -8,28 +8,28 @@
  * VEMotherBoard.lisa
  */
 / {
-	v2m_clk24mhz: clk24mhz {
+	v2m_clk24mhz: clock-24000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 		clock-output-names = "v2m:clk24mhz";
 	};
 
-	v2m_refclk1mhz: refclk1mhz {
+	v2m_refclk1mhz: clock-1000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000>;
 		clock-output-names = "v2m:refclk1mhz";
 	};
 
-	v2m_refclk32khz: refclk32khz {
+	v2m_refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 		clock-output-names = "v2m:refclk32khz";
 	};
 
-	v2m_fixed_3v3: v2m-3v3 {
+	v2m_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
 		regulator-min-microvolt = <3300000>;
@@ -41,7 +41,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		v2m_oscclk1: oscclk1 {
+		v2m_oscclk1: clock-controller {
 			/* CLCD clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
diff --git a/dts/upstream/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts b/dts/upstream/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
index 9115c99d0dc..a0e1fa83eaf 100644
--- a/dts/upstream/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/dts/upstream/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -111,7 +111,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		smbclk: smclk {
+		smbclk: clock-controller {
 			/* SMC clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -120,7 +120,7 @@
 			clock-output-names = "smclk";
 		};
 
-		volt-vio {
+		regulator-vio {
 			/* VIO to expansion board above */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -130,7 +130,7 @@
 			regulator-always-on;
 		};
 
-		volt-12v {
+		regulator-12v {
 			/* 12V from power connector J6 */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
diff --git a/dts/upstream/src/arm64/exynos/exynos850.dtsi b/dts/upstream/src/arm64/exynos/exynos850.dtsi
index 0706c8534ce..f1c8b4613cb 100644
--- a/dts/upstream/src/arm64/exynos/exynos850.dtsi
+++ b/dts/upstream/src/arm64/exynos/exynos850.dtsi
@@ -416,6 +416,14 @@
 			interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		trng: rng@12081400 {
+			compatible = "samsung,exynos850-trng";
+			reg = <0x12081400 0x100>;
+			clocks = <&cmu_core CLK_GOUT_SSS_ACLK>,
+				 <&cmu_core CLK_GOUT_SSS_PCLK>;
+			clock-names = "secss", "pclk";
+		};
+
 		pinctrl_hsi: pinctrl@13430000 {
 			compatible = "samsung,exynos850-pinctrl";
 			reg = <0x13430000 0x1000>;
diff --git a/dts/upstream/src/arm64/exynos/google/gs101-oriole.dts b/dts/upstream/src/arm64/exynos/google/gs101-oriole.dts
index 5e8ffe06508..387fb779bd2 100644
--- a/dts/upstream/src/arm64/exynos/google/gs101-oriole.dts
+++ b/dts/upstream/src/arm64/exynos/google/gs101-oriole.dts
@@ -131,9 +131,9 @@
 };
 
 &usbdrd31 {
-	status = "okay";
 	vdd10-supply = <&reg_placeholder>;
 	vdd33-supply = <&reg_placeholder>;
+	status = "okay";
 };
 
 &usbdrd31_dwc3 {
@@ -145,6 +145,13 @@
 };
 
 &usbdrd31_phy {
+	/* TODO: Update these once PMIC is implemented */
+	pll-supply = <&reg_placeholder>;
+	dvdd-usb20-supply = <&reg_placeholder>;
+	vddh-usb20-supply = <&reg_placeholder>;
+	vdd33-usb20-supply = <&reg_placeholder>;
+	vdda-usbdp-supply = <&reg_placeholder>;
+	vddh-usbdp-supply = <&reg_placeholder>;
 	status = "okay";
 };
 
diff --git a/dts/upstream/src/arm64/exynos/google/gs101.dtsi b/dts/upstream/src/arm64/exynos/google/gs101.dtsi
index a66e996666b..eadb8822e6d 100644
--- a/dts/upstream/src/arm64/exynos/google/gs101.dtsi
+++ b/dts/upstream/src/arm64/exynos/google/gs101.dtsi
@@ -213,9 +213,9 @@
 
 	pmu-3 {
 		compatible = "arm,dsu-pmu";
-		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
 		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
 		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
 	};
 
 	psci {
@@ -288,6 +288,8 @@
 			compatible = "google,gs101-mct",
 				     "samsung,exynos4210-mct";
 			reg = <0x10050000 0x800>;
+			clocks = <&ext_24_5m>, <&cmu_misc CLK_GOUT_MISC_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
 			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH 0>,
 				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH 0>,
 				     <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -300,17 +302,15 @@
 				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH 0>,
 				     <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH 0>,
 				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&ext_24_5m>, <&cmu_misc CLK_GOUT_MISC_MCT_PCLK>;
-			clock-names = "fin_pll", "mct";
 		};
 
 		watchdog_cl0: watchdog@10060000 {
 			compatible = "google,gs101-wdt";
 			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>,
 				 <&ext_24_5m>;
 			clock-names = "watchdog", "watchdog_src";
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
 			samsung,cluster-index = <0>;
 			status = "disabled";
@@ -319,10 +319,10 @@
 		watchdog_cl1: watchdog@10070000 {
 			compatible = "google,gs101-wdt";
 			reg = <0x10070000 0x100>;
-			interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>,
 				 <&ext_24_5m>;
 			clock-names = "watchdog", "watchdog_src";
+			interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
 			samsung,cluster-index = <1>;
 			status = "disabled";
@@ -776,12 +776,12 @@
 				compatible = "google,gs101-hsi2c",
 					     "samsung,exynosautov9-hsi2c";
 				reg = <0x10970000 0xc0>;
-				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>,
 					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>;
 				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-0 = <&hsi2c8_bus>;
 				pinctrl-names = "default";
 				status = "disabled";
@@ -831,10 +831,10 @@
 			serial_0: serial@10a00000 {
 				compatible = "google,gs101-uart";
 				reg = <0x10a00000 0xc0>;
-				interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
 					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-0 = <&uart0_bus>;
 				pinctrl-names = "default";
 				samsung,uart-fifosize = <256>;
@@ -1157,12 +1157,12 @@
 				compatible = "google,gs101-hsi2c",
 					     "samsung,exynosautov9-hsi2c";
 				reg = <0x10d50000 0xc0>;
-				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>,
 					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>;
 				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-0 = <&hsi2c12_bus>;
 				pinctrl-names = "default";
 				status = "disabled";
@@ -1277,13 +1277,14 @@
 				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK>,
 				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK>;
 			clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk";
-			samsung,pmu-syscon = <&pmu_system_controller>;
 			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
 			status = "disabled";
 		};
 
 		usbdrd31: usb@11110000 {
 			compatible = "google,gs101-dwusb3";
+			ranges = <0x0 0x11110000 0x10000>;
 			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
 				<&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26>,
 				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK>,
@@ -1291,14 +1292,13 @@
 			clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x0 0x11110000 0x10000>;
 			status = "disabled";
 
 			usbdrd31_dwc3: usb@0 {
 				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
 				clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40>;
 				clock-names = "ref";
-				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
 				phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1012a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls1012a.dtsi
index a0f7bbd691a..e61ea7e0737 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1012a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1012a.dtsi
@@ -74,15 +74,15 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
-			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
-			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
-			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	gic: interrupt-controller@1400000 {
@@ -93,7 +93,7 @@
 		      <0x0 0x1402000 0 0x2000>, /* GICC */
 		      <0x0 0x1404000 0 0x2000>, /* GICH */
 		      <0x0 0x1406000 0 0x2000>; /* GICV */
-		interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	reboot {
@@ -156,10 +156,10 @@
 			status = "disabled";
 		};
 
-		esdhc0: esdhc@1560000 {
+		esdhc0: mmc@1560000 {
 			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -175,10 +175,10 @@
 			big-endian;
 		};
 
-		esdhc1: esdhc@1580000 {
+		esdhc1: mmc@1580000 {
 			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1580000 0x0 0x10000>;
-			interrupts = <0 65 0x4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -305,7 +305,7 @@
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
 			fsl,tmu-calibration =
 					<0x00000000 0x00000025>,
@@ -355,7 +355,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
-			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			scl-gpios = <&gpio0 2 0>;
@@ -367,7 +367,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
-			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			scl-gpios = <&gpio0 13 0>;
@@ -379,7 +379,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -391,7 +391,7 @@
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
-			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
@@ -400,16 +400,16 @@
 		duart1: serial@21c0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0600 0x0 0x100>;
-			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -417,9 +417,9 @@
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -430,7 +430,7 @@
 			compatible = "fsl,ls1012a-wdt",
 				     "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
 			big-endian;
 		};
@@ -439,7 +439,7 @@
 			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b50000 0x0 0x10000>;
-			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -449,9 +449,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 47>,
-			       <&edma0 1 46>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 46>,
+			       <&edma0 1 47>;
 			status = "disabled";
 		};
 
@@ -459,7 +459,7 @@
 			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
 			reg = <0x0 0x2b60000 0x0 0x10000>;
-			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>,
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -469,9 +469,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 45>,
-			       <&edma0 1 44>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 44>,
+			       <&edma0 1 45>;
 			status = "disabled";
 		};
 
@@ -481,8 +481,8 @@
 			reg = <0x0 0x2c00000 0x0 0x10000>,
 			      <0x0 0x2c10000 0x0 0x10000>,
 			      <0x0 0x2c20000 0x0 0x10000>;
-			interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "edma-tx", "edma-err";
 			dma-channels = <32>;
 			big-endian;
@@ -496,12 +496,11 @@
 		usb0: usb@2f00000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x2f00000 0x0 0x10000>;
-			interrupts = <0 60 0x4>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-			snps,host-vbus-glitches;
 		};
 
 		sata: sata@3200000 {
@@ -509,7 +508,7 @@
 			reg = <0x0 0x3200000 0x0 0x10000>,
 				<0x0 0x20140520 0x0 0x4>;
 			reg-names = "ahci", "sata-ecc";
-			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			dma-coherent;
@@ -519,7 +518,7 @@
 		usb1: usb@8600000 {
 			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			reg = <0x0 0x8600000 0x0 0x1000>;
-			interrupts = <0 139 0x4>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			phy_type = "ulpi";
 		};
@@ -528,7 +527,7 @@
 			compatible = "fsl,ls1012a-msi";
 			reg = <0x0 0x1572000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pcie1: pcie@3400000 {
@@ -536,9 +535,9 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>, /* controller interrupt */
-				     <0 117 0x4>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -563,7 +562,7 @@
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1012a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1028a-rdb.dts b/dts/upstream/src/arm64/freescale/fsl-ls1028a-rdb.dts
index ecd2c1ea177..757a34ba7da 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1028a-rdb.dts
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1028a-rdb.dts
@@ -201,6 +201,37 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			/* Atmel AT24C512C-XHD­B: 64 KB EEPROM */
+			eeprom@50 {
+				compatible = "atmel,24c512";
+				reg = <0x50>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			/* AT24C04C 512-byte DDR4 SPD EEPROM */
+			/* Documentation says 0x51, but must be even and i2cdetect says 0x52 */
+			eeprom@52 {
+				compatible = "atmel,24c04";
+				reg = <0x52>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			/* Atmel AT24C02C-XHM­B: 256-byte EEPROM */
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
 		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls1028a.dtsi
index 70b8731029c..acf293310f7 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1028a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1028a.dtsi
@@ -155,7 +155,7 @@
 	};
 
 	thermal-zones {
-		ddr-controller {
+		ddr-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -175,7 +175,7 @@
 			};
 		};
 
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -674,7 +674,7 @@
 		};
 
 		pcie_ep1: pcie-ep@3400000 {
-			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			compatible = "fsl,ls1028a-pcie-ep";
 			reg = <0x00 0x03400000 0x0 0x00100000
 			       0x80 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
@@ -713,7 +713,7 @@
 		};
 
 		pcie_ep2: pcie-ep@3500000 {
-			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			compatible = "fsl,ls1028a-pcie-ep";
 			reg = <0x00 0x03500000 0x0 0x00100000
 			       0x88 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
@@ -828,6 +828,7 @@
 				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
@@ -859,8 +860,8 @@
 		malidp0: display@f080000 {
 			compatible = "arm,mali-dp500";
 			reg = <0x0 0xf080000 0x0 0x10000>;
-			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "DE", "SE";
 			clocks = <&dpclk>,
 				 <&clockgen QORIQ_CLK_HWACCEL 2>,
@@ -902,9 +903,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 4>,
-			       <&edma0 1 3>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 3>,
+			       <&edma0 1 4>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -923,9 +924,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 6>,
-			       <&edma0 1 5>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 5>,
+			       <&edma0 1 6>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -944,9 +945,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 8>,
-			       <&edma0 1 7>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 7>,
+			       <&edma0 1 8>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -965,9 +966,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 10>,
-			       <&edma0 1 9>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 9>,
+			       <&edma0 1 10>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -986,9 +987,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 12>,
-			       <&edma0 1 11>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 11>,
+			       <&edma0 1 12>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -1007,9 +1008,9 @@
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 14>,
-			       <&edma0 1 13>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 13>,
+			       <&edma0 1 14>;
 			fsl,sai-asynchronous;
 			status = "disabled";
 		};
@@ -1024,7 +1025,7 @@
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
 			fsl,tmu-calibration =
 					<0x00000000 0x00000024>,
@@ -1325,7 +1326,7 @@
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls1028a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
@@ -1333,7 +1334,7 @@
 			status = "disabled";
 		};
 
-		ftm_alarm1: timer@2810000 {
+		ftm_alarm1: rtc@2810000 {
 			compatible = "fsl,ls1028a-ftm-alarm";
 			reg = <0x0 0x2810000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1043a-qds.dts b/dts/upstream/src/arm64/freescale/fsl-ls1043a-qds.dts
index dda27ed7aaf..11b1356e95d 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1043a-qds.dts
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1043a-qds.dts
@@ -64,7 +64,7 @@
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		big-endian;
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1043a-rdb.dts b/dts/upstream/src/arm64/freescale/fsl-ls1043a-rdb.dts
index 26f8540cb10..c4532c809f0 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1043a-rdb.dts
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1043a-rdb.dts
@@ -71,7 +71,7 @@
 		  0x1 0x0 0x0 0x7e800000 0x00010000
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 
-		nor@0,0 {
+		flash@0,0 {
 			compatible = "cfi-flash";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -104,6 +104,12 @@
 		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
 		reg = <0>;
 		spi-max-frequency = <1000000>; /* input clock */
+		/*
+		 * Standard CS timing properties replace the deprecated vendor
+		 * variants below.
+		 */
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <100>;
 		fsl,spi-cs-sck-delay = <100>;
 		fsl,spi-sck-cs-delay = <100>;
 	};
@@ -112,6 +118,12 @@
 		compatible = "maxim,ds26522";
 		reg = <2>;
 		spi-max-frequency = <2000000>;
+		/*
+		 * Standard CS timing properties replace the deprecated vendor
+		 * variants below.
+		 */
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <50>;
 		fsl,spi-cs-sck-delay = <100>;
 		fsl,spi-sck-cs-delay = <50>;
 	};
@@ -120,6 +132,12 @@
 		compatible = "maxim,ds26522";
 		reg = <3>;
 		spi-max-frequency = <2000000>;
+		/*
+		 * Standard CS timing properties replace the deprecated vendor
+		 * variants below.
+		 */
+		spi-cs-setup-delay-ns = <100>;
+		spi-cs-hold-delay-ns = <50>;
 		fsl,spi-cs-sck-delay = <100>;
 		fsl,spi-sck-cs-delay = <50>;
 	};
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls1043a.dtsi
index 8ee6d8c0ef6..ab4c919e3e1 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1043a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1043a.dtsi
@@ -154,7 +154,7 @@
 	};
 
 	thermal-zones {
-		ddr-controller {
+		ddr-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -174,7 +174,7 @@
 			};
 		};
 
-		serdes {
+		serdes-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -194,7 +194,7 @@
 			};
 		};
 
-		fman {
+		fman-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -214,7 +214,7 @@
 			};
 		};
 
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -245,7 +245,7 @@
 			};
 		};
 
-		sec {
+		sec-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -268,19 +268,19 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
-			     <1 14 0xf08>, /* Physical Non-Secure PPI */
-			     <1 11 0xf08>, /* Virtual PPI */
-			     <1 10 0xf08>; /* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		fsl,erratum-a008585;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts = <0 106 0x4>,
-			     <0 107 0x4>,
-			     <0 95 0x4>,
-			     <0 97 0x4>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,
@@ -295,7 +295,7 @@
 		      <0x0 0x1402000 0 0x2000>, /* GICC */
 		      <0x0 0x1404000 0 0x2000>, /* GICH */
 		      <0x0 0x1406000 0 0x2000>; /* GICV */
-		interrupts = <1 9 0xf08>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	soc: soc {
@@ -352,7 +352,7 @@
 			#size-cells = <1>;
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
-			interrupts = <0 75 0x4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			dma-coherent;
 
 			sec_jr0: jr@10000 {
@@ -360,7 +360,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x10000 0x10000>;
-				interrupts = <0 71 0x4>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr1: jr@20000 {
@@ -368,7 +368,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x20000 0x10000>;
-				interrupts = <0 72 0x4>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr2: jr@30000 {
@@ -376,7 +376,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x30000 0x10000>;
-				interrupts = <0 73 0x4>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sec_jr3: jr@40000 {
@@ -384,7 +384,7 @@
 					     "fsl,sec-v5.0-job-ring",
 					     "fsl,sec-v4.0-job-ring";
 				reg = <0x40000 0x10000>;
-				interrupts = <0 74 0x4>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -405,7 +405,7 @@
 		ifc: memory-controller@1530000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x1530000 0x0 0x10000>;
-			interrupts = <0 43 0x4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		qspi: spi@1550000 {
@@ -415,7 +415,7 @@
 			reg = <0x0 0x1550000 0x0 0x10000>,
 				<0x0 0x40000000 0x0 0x4000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
-			interrupts = <0 99 0x4>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "qspi_en", "qspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>,
@@ -424,10 +424,10 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@1560000 {
+		esdhc: mmc@1560000 {
 			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
@@ -438,14 +438,14 @@
 		ddr: memory-controller@1080000 {
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
-			interrupts = <0 144 0x4>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 			big-endian;
 		};
 
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 					<0x00000000 0x00000023>,
@@ -505,11 +505,11 @@
 			memory-region = <&bman_fbpr>;
 		};
 
-		bportals: bman-portals@508000000 {
+		bportals: bman-portals-bus@508000000 {
 			ranges = <0x0 0x5 0x08000000 0x8000000>;
 		};
 
-		qportals: qman-portals@500000000 {
+		qportals: qman-portals-bus@500000000 {
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
@@ -518,7 +518,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 64 0x4>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "dspi";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
@@ -532,8 +532,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
-			interrupts = <0 56 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			dmas = <&edma0 1 38>,
@@ -547,8 +547,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
-			interrupts = <0 57 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -560,8 +560,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
-			interrupts = <0 58 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -573,8 +573,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21b0000 0x0 0x10000>;
-			interrupts = <0 59 0x4>;
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -584,7 +584,7 @@
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
-			interrupts = <0 54 0x4>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -592,7 +592,7 @@
 		duart1: serial@21c0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0600 0x0 0x100>;
-			interrupts = <0 54 0x4>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -600,7 +600,7 @@
 		duart2: serial@21d0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21d0500 0x0 0x100>;
-			interrupts = <0 55 0x4>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -608,7 +608,7 @@
 		duart3: serial@21d0600 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21d0600 0x0 0x100>;
-			interrupts = <0 55 0x4>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
@@ -616,7 +616,7 @@
 		gpio1: gpio@2300000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 66 0x4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -626,7 +626,7 @@
 		gpio2: gpio@2310000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 67 0x4>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -636,7 +636,7 @@
 		gpio3: gpio@2320000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 68 0x4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -646,7 +646,7 @@
 		gpio4: gpio@2330000 {
 			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 134 0x4>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -721,7 +721,7 @@
 		lpuart0: serial@2950000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2950000 0x0 0x1000>;
-			interrupts = <0 48 0x4>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
 			clock-names = "ipg";
 			status = "disabled";
@@ -730,7 +730,7 @@
 		lpuart1: serial@2960000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2960000 0x0 0x1000>;
-			interrupts = <0 49 0x4>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
@@ -740,7 +740,7 @@
 		lpuart2: serial@2970000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2970000 0x0 0x1000>;
-			interrupts = <0 50 0x4>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
@@ -750,7 +750,7 @@
 		lpuart3: serial@2980000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2980000 0x0 0x1000>;
-			interrupts = <0 51 0x4>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
@@ -760,7 +760,7 @@
 		lpuart4: serial@2990000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x2990000 0x0 0x1000>;
-			interrupts = <0 52 0x4>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
@@ -770,7 +770,7 @@
 		lpuart5: serial@29a0000 {
 			compatible = "fsl,ls1021a-lpuart";
 			reg = <0x0 0x29a0000 0x0 0x1000>;
-			interrupts = <0 53 0x4>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
@@ -780,10 +780,9 @@
 		wdog0: watchdog@2ad0000 {
 			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-			interrupts = <0 83 0x4>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
-			clock-names = "wdog";
 			big-endian;
 		};
 
@@ -793,8 +792,8 @@
 			reg = <0x0 0x2c00000 0x0 0x10000>,
 			      <0x0 0x2c10000 0x0 0x10000>,
 			      <0x0 0x2c20000 0x0 0x10000>;
-			interrupts = <0 103 0x4>,
-				     <0 103 0x4>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "edma-tx", "edma-err";
 			dma-channels = <32>;
 			big-endian;
@@ -805,7 +804,7 @@
 					    QORIQ_CLK_PLL_DIV(1)>;
 		};
 
-		aux_bus: aux_bus {
+		aux_bus: aux-bus {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			compatible = "simple-bus";
@@ -815,7 +814,7 @@
 			usb0: usb@2f00000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x2f00000 0x0 0x10000>;
-				interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -827,7 +826,7 @@
 			usb1: usb@3000000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3000000 0x0 0x10000>;
-				interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -839,7 +838,7 @@
 			usb2: usb@3100000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
-				interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -853,7 +852,7 @@
 				reg = <0x0 0x3200000 0x0 0x10000>,
 					<0x0 0x20140520 0x0 0x4>;
 				reg-names = "ahci", "sata-ecc";
-				interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 						    QORIQ_CLK_PLL_DIV(1)>;
 				dma-coherent;
@@ -864,21 +863,21 @@
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1571000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 116 0x4>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller2@1572000 {
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1572000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 126 0x4>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi3: msi-controller3@1573000 {
 			compatible = "fsl,ls1043a-msi";
 			reg = <0x0 0x1573000 0x0 0x8>;
 			msi-controller;
-			interrupts = <0 160 0x4>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pcie1: pcie@3400000 {
@@ -886,8 +885,8 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -913,8 +912,8 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -940,8 +939,8 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 162 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -974,6 +973,7 @@
 				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
@@ -989,7 +989,7 @@
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1043a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1046a-qds.dts b/dts/upstream/src/arm64/freescale/fsl-ls1046a-qds.dts
index 3b0ed9305f2..e5296e51f65 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1046a-qds.dts
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1046a-qds.dts
@@ -151,7 +151,7 @@
 		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		big-endian;
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls1046a.dtsi
index 754a64be739..55019866d6a 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1046a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1046a.dtsi
@@ -122,7 +122,7 @@
 	};
 
 	thermal-zones {
-		ddr-controller {
+		ddr-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -142,7 +142,7 @@
 			};
 		};
 
-		serdes {
+		serdes-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -162,7 +162,7 @@
 			};
 		};
 
-		fman {
+		fman-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -182,7 +182,7 @@
 			};
 		};
 
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -213,7 +213,7 @@
 			};
 		};
 
-		sec {
+		sec-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -308,7 +308,7 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@1560000 {
+		esdhc: mmc@1560000 {
 			compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
@@ -409,11 +409,11 @@
 
 		};
 
-		qportals: qman-portals@500000000 {
+		qportals: qman-portals-bus@500000000 {
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
-		bportals: bman-portals@508000000 {
+		bportals: bman-portals-bus@508000000 {
 			ranges = <0x0 0x5 0x08000000 0x8000000>;
 		};
 
@@ -441,7 +441,7 @@
 		tmu: tmu@1f00000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
@@ -589,7 +589,7 @@
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -599,7 +599,7 @@
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -609,7 +609,7 @@
 		};
 
 		gpio2: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -619,7 +619,7 @@
 		};
 
 		gpio3: gpio@2330000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -715,7 +715,7 @@
 					    QORIQ_CLK_PLL_DIV(2)>;
 		};
 
-		aux_bus: aux_bus {
+		aux_bus: aux-bus {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			compatible = "simple-bus";
@@ -801,9 +801,9 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -840,9 +840,9 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -879,9 +879,9 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
-				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
-			interrupt-names = "aer", "pme";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "pme", "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -925,6 +925,7 @@
 				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error", "qdma-queue0",
 				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			#dma-cells = <1>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x10000>;
@@ -940,7 +941,7 @@
 			#fsl,rcpm-wakeup-cells = <1>;
 		};
 
-		ftm_alarm0: timer@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1046a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x20000>;
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1088a-qds.dts b/dts/upstream/src/arm64/freescale/fsl-ls1088a-qds.dts
index aa52ff73ff9..d238a8440a8 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1088a-qds.dts
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1088a-qds.dts
@@ -113,7 +113,7 @@
 		  3 0 0x5 0x20000000 0x00010000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x8000000>;
 		bank-width = <2>;
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls1088a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls1088a.dtsi
index 604bf88d70b..e3a7db21fe2 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls1088a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls1088a.dtsi
@@ -118,7 +118,7 @@
 		      <0x0 0x0c0c0000 0 0x2000>, /* GICC */
 		      <0x0 0x0c0d0000 0 0x1000>, /* GICH */
 		      <0x0 0x0c0e0000 0 0x20000>; /* GICV */
-		interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -131,7 +131,7 @@
 	};
 
 	thermal-zones {
-		core-cluster {
+		cluster-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -166,7 +166,7 @@
 			};
 		};
 
-		soc {
+		soc-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -183,10 +183,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
-			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
-			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
-			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
 	pmu {
@@ -280,7 +280,7 @@
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
@@ -347,7 +347,7 @@
 			reg = <0x0 0x21c0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -356,14 +356,14 @@
 			reg = <0x0 0x21c0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		gpio0: gpio@2300000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -374,7 +374,7 @@
 		gpio1: gpio@2310000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -385,7 +385,7 @@
 		gpio2: gpio@2320000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -396,7 +396,7 @@
 		gpio3: gpio@2330000 {
 			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -407,7 +407,7 @@
 		ifc: memory-controller@2240000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x2240000 0x0 0x20000>;
-			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -419,7 +419,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -430,7 +430,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
-			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -441,7 +441,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
-			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -452,7 +452,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
-			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(8)>;
 			status = "disabled";
@@ -474,10 +474,10 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@2140000 {
+		esdhc: mmc@2140000 {
 			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -490,7 +490,7 @@
 		usb0: usb@3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -501,7 +501,7 @@
 		usb1: usb@3110000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
-			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
@@ -514,7 +514,7 @@
 			reg = <0x0 0x3200000 0x0 0x10000>,
 				<0x7 0x100520 0x0 0x4>;
 			reg-names = "ahci", "sata-ecc";
-			interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -565,7 +565,7 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
 			      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -604,7 +604,7 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
 			      <0x28 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -642,7 +642,7 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
 			      <0x30 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 			interrupt-names = "aer";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -880,7 +880,7 @@
 			};
 		};
 
-		cluster1_core0_watchdog: wdt@c000000 {
+		cluster1_core0_watchdog: watchdog@c000000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -890,7 +890,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core1_watchdog: wdt@c010000 {
+		cluster1_core1_watchdog: watchdog@c010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -900,7 +900,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core2_watchdog: wdt@c020000 {
+		cluster1_core2_watchdog: watchdog@c020000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc020000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -910,7 +910,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core3_watchdog: wdt@c030000 {
+		cluster1_core3_watchdog: watchdog@c030000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc030000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -920,7 +920,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core0_watchdog: wdt@c100000 {
+		cluster2_core0_watchdog: watchdog@c100000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -930,7 +930,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core1_watchdog: wdt@c110000 {
+		cluster2_core1_watchdog: watchdog@c110000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -940,7 +940,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core2_watchdog: wdt@c120000 {
+		cluster2_core2_watchdog: watchdog@c120000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc120000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -950,7 +950,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core3_watchdog: wdt@c130000 {
+		cluster2_core3_watchdog: watchdog@c130000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc130000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -1040,7 +1040,7 @@
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls1088a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls2080a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls2080a.dtsi
index 8352197cea6..e9bc1f4fa13 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls2080a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls2080a.dtsi
@@ -15,7 +15,7 @@
 / {
 	pmu {
 		compatible = "arm,cortex-a57-pmu";
-		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls2088a.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls2088a.dtsi
index 245bbd615c8..60c422560e3 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls2088a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls2088a.dtsi
@@ -15,7 +15,7 @@
 / {
 	pmu {
 		compatible = "arm,cortex-a72-pmu";
-		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls208xa-qds.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls208xa-qds.dtsi
index e2c94da6d6e..9178cd61c78 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls208xa-qds.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls208xa-qds.dtsi
@@ -43,7 +43,7 @@
 		  0x2 0x0 0x5 0x30000000 0x00010000
 		  0x3 0x0 0x5 0x20000000 0x00010000>;
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls208xa-rdb.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls208xa-rdb.dtsi
index 537cecb13dd..69cd05a30b8 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls208xa-rdb.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls208xa-rdb.dtsi
@@ -21,7 +21,7 @@
 		  0x2 0x0 0x5 0x30000000 0x00010000
 		  0x3 0x0 0x5 0x20000000 0x00010000>;
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/dts/upstream/src/arm64/freescale/fsl-ls208xa.dtsi b/dts/upstream/src/arm64/freescale/fsl-ls208xa.dtsi
index ccba0a135b2..1b306d6802c 100644
--- a/dts/upstream/src/arm64/freescale/fsl-ls208xa.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-ls208xa.dtsi
@@ -58,7 +58,7 @@
 		#size-cells = <2>;
 		ranges;
 		interrupt-controller;
-		interrupts = <1 9 0x4>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
 		its: msi-controller@6020000 {
 			compatible = "arm,gic-v3-its";
@@ -80,7 +80,7 @@
 	};
 
 	thermal-zones {
-		ddr-controller1 {
+		ddr-ctrl1-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -94,7 +94,7 @@
 			};
 		};
 
-		ddr-controller2 {
+		ddr-ctrl2-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -108,7 +108,7 @@
 			};
 		};
 
-		ddr-controller3 {
+		ddr-ctrl3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -122,7 +122,7 @@
 			};
 		};
 
-		core-cluster1 {
+		cluster1-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -151,7 +151,7 @@
 			};
 		};
 
-		core-cluster2 {
+		cluster2-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 5>;
@@ -180,7 +180,7 @@
 			};
 		};
 
-		core-cluster3 {
+		cluster3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 6>;
@@ -209,7 +209,7 @@
 			};
 		};
 
-		core-cluster4 {
+		cluster4-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 7>;
@@ -241,10 +241,10 @@
 
 	timer: timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
-			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
-			     <1 11 4>, /* Virtual PPI, active-low */
-			     <1 10 4>; /* Hypervisor PPI, active-low */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hypervisor PPI */
 	};
 
 	psci {
@@ -314,7 +314,7 @@
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
 			fsl,tmu-calibration =
 					<0x00000000 0x00000026>,
@@ -362,7 +362,7 @@
 			reg = <0x0 0x21c0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial1: serial@21c0600 {
@@ -370,7 +370,7 @@
 			reg = <0x0 0x21c0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 32 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial2: serial@21d0500 {
@@ -378,7 +378,7 @@
 			reg = <0x0 0x21d0500 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 33 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial3: serial@21d0600 {
@@ -386,10 +386,10 @@
 			reg = <0x0 0x21d0600 0x0 0x100>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
-			interrupts = <0 33 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		cluster1_core0_watchdog: wdt@c000000 {
+		cluster1_core0_watchdog: watchdog@c000000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -399,7 +399,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster1_core1_watchdog: wdt@c010000 {
+		cluster1_core1_watchdog: watchdog@c010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -409,7 +409,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core0_watchdog: wdt@c100000 {
+		cluster2_core0_watchdog: watchdog@c100000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -419,7 +419,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster2_core1_watchdog: wdt@c110000 {
+		cluster2_core1_watchdog: watchdog@c110000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -429,7 +429,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster3_core0_watchdog: wdt@c200000 {
+		cluster3_core0_watchdog: watchdog@c200000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc200000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -439,7 +439,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster3_core1_watchdog: wdt@c210000 {
+		cluster3_core1_watchdog: watchdog@c210000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc210000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -449,7 +449,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster4_core0_watchdog: wdt@c300000 {
+		cluster4_core0_watchdog: watchdog@c300000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc300000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -459,7 +459,7 @@
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
-		cluster4_core1_watchdog: wdt@c310000 {
+		cluster4_core1_watchdog: watchdog@c310000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc310000 0x0 0x1000>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
@@ -883,48 +883,48 @@
 			#iommu-cells = <1>;
 			stream-match-mask = <0x7C00>;
 			dma-coherent;
-			interrupts = <0 13 4>, /* global secure fault */
-				     <0 14 4>, /* combined secure interrupt */
-				     <0 15 4>, /* global non-secure fault */
-				     <0 16 4>, /* combined non-secure interrupt */
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* global secure fault */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* combined secure interrupt */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, /* global non-secure fault */
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, /* combined non-secure interrupt */
 				/* performance counter interrupts 0-7 */
-				     <0 211 4>, <0 212 4>,
-				     <0 213 4>, <0 214 4>,
-				     <0 215 4>, <0 216 4>,
-				     <0 217 4>, <0 218 4>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
 				/* per context interrupt, 64 interrupts */
-				     <0 146 4>, <0 147 4>,
-				     <0 148 4>, <0 149 4>,
-				     <0 150 4>, <0 151 4>,
-				     <0 152 4>, <0 153 4>,
-				     <0 154 4>, <0 155 4>,
-				     <0 156 4>, <0 157 4>,
-				     <0 158 4>, <0 159 4>,
-				     <0 160 4>, <0 161 4>,
-				     <0 162 4>, <0 163 4>,
-				     <0 164 4>, <0 165 4>,
-				     <0 166 4>, <0 167 4>,
-				     <0 168 4>, <0 169 4>,
-				     <0 170 4>, <0 171 4>,
-				     <0 172 4>, <0 173 4>,
-				     <0 174 4>, <0 175 4>,
-				     <0 176 4>, <0 177 4>,
-				     <0 178 4>, <0 179 4>,
-				     <0 180 4>, <0 181 4>,
-				     <0 182 4>, <0 183 4>,
-				     <0 184 4>, <0 185 4>,
-				     <0 186 4>, <0 187 4>,
-				     <0 188 4>, <0 189 4>,
-				     <0 190 4>, <0 191 4>,
-				     <0 192 4>, <0 193 4>,
-				     <0 194 4>, <0 195 4>,
-				     <0 196 4>, <0 197 4>,
-				     <0 198 4>, <0 199 4>,
-				     <0 200 4>, <0 201 4>,
-				     <0 202 4>, <0 203 4>,
-				     <0 204 4>, <0 205 4>,
-				     <0 206 4>, <0 207 4>,
-				     <0 208 4>, <0 209 4>;
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		dspi: spi@2100000 {
@@ -933,18 +933,18 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <0 26 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "dspi";
 			spi-num-chipselects = <5>;
 		};
 
-		esdhc: esdhc@2140000 {
+		esdhc: mmc@2140000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			voltage-ranges = <1800 1800 3300 3300>;
@@ -956,7 +956,7 @@
 		gpio0: gpio@2300000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <0 36 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -967,7 +967,7 @@
 		gpio1: gpio@2310000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <0 36 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -978,7 +978,7 @@
 		gpio2: gpio@2320000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <0 37 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -989,7 +989,7 @@
 		gpio3: gpio@2330000 {
 			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <0 37 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			little-endian;
 			#gpio-cells = <2>;
@@ -1003,8 +1003,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
-			interrupts = <0 34 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1015,8 +1015,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
-			interrupts = <0 34 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1027,8 +1027,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
-			interrupts = <0 35 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1039,8 +1039,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
-			interrupts = <0 35 0x4>; /* Level high type */
-			clock-names = "i2c";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 		};
@@ -1048,7 +1048,7 @@
 		ifc: memory-controller@2240000 {
 			compatible = "fsl,ifc";
 			reg = <0x0 0x2240000 0x0 0x20000>;
-			interrupts = <0 21 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			little-endian;
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -1077,7 +1077,7 @@
 		pcie1: pcie@3400000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 108 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1099,7 +1099,7 @@
 		pcie2: pcie@3500000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 113 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1121,7 +1121,7 @@
 		pcie3: pcie@3600000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 118 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1143,7 +1143,7 @@
 		pcie4: pcie@3700000 {
 			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
-			interrupts = <0 123 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "intr";
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -1166,7 +1166,7 @@
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>;
-			interrupts = <0 133 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -1176,7 +1176,7 @@
 			status = "disabled";
 			compatible = "fsl,ls2080a-ahci";
 			reg = <0x0 0x3210000 0x0 0x10000>;
-			interrupts = <0 136 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			dma-coherent;
@@ -1192,7 +1192,7 @@
 			usb0: usb@3100000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3100000 0x0 0x10000>;
-				interrupts = <0 80 0x4>; /* Level high type */
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -1203,7 +1203,7 @@
 			usb1: usb@3110000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x3110000 0x0 0x10000>;
-				interrupts = <0 81 0x4>; /* Level high type */
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 				dr_mode = "host";
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,dis_rxdet_inp3_quirk;
@@ -1215,7 +1215,7 @@
 		ccn@4000000 {
 			compatible = "arm,ccn-504";
 			reg = <0x0 0x04000000 0x0 0x01000000>;
-			interrupts = <0 12 4>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		rcpm: power-controller@1e34040 {
@@ -1225,7 +1225,7 @@
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,ls208xa-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
@@ -1236,14 +1236,14 @@
 	ddr1: memory-controller@1080000 {
 		compatible = "fsl,qoriq-memory-controller";
 		reg = <0x0 0x1080000 0x0 0x1000>;
-		interrupts = <0 17 0x4>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		little-endian;
 	};
 
 	ddr2: memory-controller@1090000 {
 		compatible = "fsl,qoriq-memory-controller";
 		reg = <0x0 0x1090000 0x0 0x1000>;
-		interrupts = <0 18 0x4>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 		little-endian;
 	};
 
diff --git a/dts/upstream/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/upstream/src/arm64/freescale/fsl-lx2160a.dtsi
index 96055593204..bd75a658767 100644
--- a/dts/upstream/src/arm64/freescale/fsl-lx2160a.dtsi
+++ b/dts/upstream/src/arm64/freescale/fsl-lx2160a.dtsi
@@ -449,7 +449,7 @@
 	};
 
 	thermal-zones {
-		cluster6-7 {
+		cluster6-7-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
@@ -492,7 +492,7 @@
 			};
 		};
 
-		ddr-cluster5 {
+		ddr-ctrl5-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 1>;
@@ -512,7 +512,7 @@
 			};
 		};
 
-		wriop {
+		wriop-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 2>;
@@ -532,7 +532,7 @@
 			};
 		};
 
-		dce-qbman-hsio2 {
+		dce-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
@@ -552,7 +552,7 @@
 			};
 		};
 
-		ccn-dpaa-tbu {
+		ccn-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 4>;
@@ -572,7 +572,7 @@
 			};
 		};
 
-		cluster4-hsio3 {
+		cluster4-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 5>;
@@ -592,7 +592,7 @@
 			};
 		};
 
-		cluster2-3 {
+		cluster2-3-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 6>;
@@ -745,7 +745,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -761,7 +761,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -777,7 +777,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -793,7 +793,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -809,7 +809,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -825,7 +825,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2050000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -841,7 +841,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2060000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -857,7 +857,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2070000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
+			clock-names = "ipg";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(16)>;
 			pinctrl-names = "default", "gpio";
@@ -925,10 +925,10 @@
 			status = "disabled";
 		};
 
-		esdhc0: esdhc@2140000 {
-			compatible = "fsl,esdhc";
+		esdhc0: mmc@2140000 {
+			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-			interrupts = <0 28 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			dma-coherent;
@@ -939,10 +939,10 @@
 			status = "disabled";
 		};
 
-		esdhc1: esdhc@2150000 {
-			compatible = "fsl,esdhc";
+		esdhc1: mmc@2150000 {
+			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2150000 0x0 0x10000>;
-			interrupts = <0 63 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			dma-coherent;
@@ -1027,7 +1027,7 @@
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1038,7 +1038,7 @@
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1049,7 +1049,7 @@
 		};
 
 		gpio2: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1060,7 +1060,7 @@
 		};
 
 		gpio3: gpio@2330000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -1085,7 +1085,7 @@
 			little-endian;
 		};
 
-		ftm_alarm0: timer@2800000 {
+		ftm_alarm0: rtc@2800000 {
 			compatible = "fsl,lx2160a-ftm-alarm";
 			reg = <0x0 0x2800000 0x0 0x10000>;
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
@@ -1702,8 +1702,8 @@
 		pinmux_i2crv: pinmux@70010012c {
 			compatible = "pinctrl-single";
 			reg = <0x00000007 0x0010012c 0x0 0xc>;
-			#address-cells = <2>;
-			#size-cells = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			pinctrl-single,bit-per-mux;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0x7>;
diff --git a/dts/upstream/src/arm64/freescale/imx8-ss-audio.dtsi b/dts/upstream/src/arm64/freescale/imx8-ss-audio.dtsi
index 897cbb7b674..ff5df0fed9e 100644
--- a/dts/upstream/src/arm64/freescale/imx8-ss-audio.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8-ss-audio.dtsi
@@ -447,7 +447,6 @@ audio_subsys: bus@59000000 {
 			<&lsio_mu13 2 1>,
 			<&lsio_mu13 3 0>,
 			<&lsio_mu13 3 1>;
-		memory-region = <&dsp_reserved>;
 		status = "disabled";
 	};
 
diff --git a/dts/upstream/src/arm64/freescale/imx8-ss-cm41.dtsi b/dts/upstream/src/arm64/freescale/imx8-ss-cm41.dtsi
new file mode 100644
index 00000000000..d715f2a6b03
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8-ss-cm41.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/clock/imx8-lpcg.h>
+
+cm41_ipg_clk: clock-cm41-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <132000000>;
+	clock-output-names = "cm41_ipg_clk";
+};
+
+cm41_subsys: bus@38000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x38000000 0x0 0x38000000 0x4000000>;
+	interrupt-parent = <&cm41_intmux>;
+
+	cm41_i2c: i2c@3b230000 {
+		compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x3b230000 0x1000>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cm41_i2c_lpcg IMX_LPCG_CLK_0>,
+			 <&cm41_i2c_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_M4_1_I2C IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_M4_1_I2C>;
+		status = "disabled";
+	};
+
+	cm41_intmux: intmux@3b400000 {
+		compatible = "fsl,imx-intmux";
+		reg = <0x3b400000 0x1000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&cm41_ipg_clk>;
+		clock-names = "ipg";
+		power-domains = <&pd IMX_SC_R_M4_1_INTMUX>;
+		status = "disabled";
+	};
+
+	cm41_i2c_lpcg: clock-controller@3b630000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x3b630000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_M4_1_I2C IMX_SC_PM_CLK_PER>,
+			 <&cm41_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "cm41_lpcg_i2c_clk",
+				     "cm41_lpcg_i2c_ipg_clk";
+		power-domains = <&pd IMX_SC_R_M4_1_I2C>;
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8-ss-conn.dtsi b/dts/upstream/src/arm64/freescale/imx8-ss-conn.dtsi
index 4aaf5a0c1ed..a4a10ce03bf 100644
--- a/dts/upstream/src/arm64/freescale/imx8-ss-conn.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8-ss-conn.dtsi
@@ -28,6 +28,13 @@ conn_ipg_clk: clock-conn-ipg {
 	clock-output-names = "conn_ipg_clk";
 };
 
+conn_bch_clk: clock-conn-bch {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <400000000>;
+	clock-output-names = "conn_bch_clk";
+};
+
 conn_subsys: bus@5b000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
@@ -302,4 +309,66 @@ conn_subsys: bus@5b000000 {
 				     "usb3_aclk";
 		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
 	};
+
+	rawnand_0_lpcg: clock-controller@5b290000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b290000 0x4>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "gpmi_bch",
+				     "gpmi_io",
+				     "gpmi_apb",
+				     "gpmi_bch_apb";
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	rawnand_4_lpcg: clock-controller@5b290004 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b290004 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "apbhdma_hclk";
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	dma_apbh: dma-controller@5b810000 {
+		compatible = "fsl,imx8qxp-dma-apbh", "fsl,imx28-dma-apbh";
+		reg = <0x5b810000 0x2000>;
+		interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		dma-channels = <4>;
+		clocks = <&rawnand_4_lpcg IMX_LPCG_CLK_0>;
+		power-domains = <&pd IMX_SC_R_NAND>;
+	};
+
+	gpmi: nand-controller@5b812000{
+		compatible = "fsl,imx8qxp-gpmi-nand";
+		reg = <0x5b812000 0x2000>, <0x5b814000 0x2000>;
+		reg-names = "gpmi-nand", "bch";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "bch";
+		clocks = <&rawnand_0_lpcg IMX_LPCG_CLK_1>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_4>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_0>,
+			 <&rawnand_0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "gpmi_io", "gpmi_apb",
+			      "gpmi_bch", "gpmi_bch_apb";
+		dmas = <&dma_apbh 0>;
+		dma-names = "rx-tx";
+		power-domains = <&pd IMX_SC_R_NAND>;
+		assigned-clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>;
+		assigned-clock-rates = <50000000>;
+		status = "disabled";
+	};
 };
diff --git a/dts/upstream/src/arm64/freescale/imx8dxl-evk.dts b/dts/upstream/src/arm64/freescale/imx8dxl-evk.dts
index 2412ab145c0..1a74ac3ee4e 100644
--- a/dts/upstream/src/arm64/freescale/imx8dxl-evk.dts
+++ b/dts/upstream/src/arm64/freescale/imx8dxl-evk.dts
@@ -24,6 +24,19 @@
 		stdout-path = &lpuart0;
 	};
 
+	imx8dxl-cm4 {
+		compatible = "fsl,imx8qxp-cm4";
+		clocks = <&clk_dummy>;
+		mbox-names = "tx", "rx", "rxdb";
+		mboxes = <&lsio_mu5 0 1 &lsio_mu5 1 1 &lsio_mu5 3 1>;
+		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+		power-domains = <&pd IMX_SC_R_M4_0_PID0>, <&pd IMX_SC_R_M4_0_MU_1A>;
+		fsl,resource-id = <IMX_SC_R_M4_0_PID0>;
+		fsl,entry-address = <0x34fe0000>;
+	};
+
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000 0 0x40000000>;
@@ -51,6 +64,37 @@
 			alloc-ranges = <0 0x98000000 0 0x14000000>;
 			linux,cma-default;
 		};
+
+		vdev0vring0: memory0@90000000 {
+			reg = <0 0x90000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: memory@90008000 {
+			reg = <0 0x90008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: memory@90010000 {
+			reg = <0 0x90010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: memory@90018000 {
+			reg = <0 0x90018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: memory-rsc-table@900ff000 {
+			reg = <0 0x900ff000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: memory-vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
 	};
 
 	m2_uart1_sel: regulator-m2uart1sel {
@@ -137,6 +181,76 @@
 		enable-active-high;
 		regulator-always-on;
 	};
+
+	bt_sco_codec: audio-codec-bt {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai0>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-wm8960-1 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960_1>;
+		audio-asrc = <&asrc0>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+
+	sound-wm8960-2 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio-2";
+		audio-cpu = <&sai2>;
+		audio-codec = <&wm8960_2>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
+
+	sound-wm8960-3 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio-3";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8960_3>;
+		audio-routing = "Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
 };
 
 &adc0 {
@@ -144,6 +258,11 @@
 	status = "okay";
 };
 
+&asrc0 {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -271,6 +390,78 @@
 			};
 		};
 
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			wm8960_1: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			wm8960_2: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			wm8960_3: audio-codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				clock-names = "mclk";
+				assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+						  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+						  <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+				assigned-clock-rates = <786432000>,
+						       <49152000>,
+						       <12288000>,
+						       <12288000>;
+				wlf,shared-lrclk;
+				wlf,hp-cfg = <2 2 3>;
+				wlf,gpio-cfg = <1 3>;
+			};
+		};
+
 		i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -358,6 +549,10 @@
 	status = "okay";
 };
 
+&lsio_mu5 {
+	status = "okay";
+};
+
 &flexcan2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan2>;
@@ -390,6 +585,53 @@
 	status = "okay";
 };
 
+&sai0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai2 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai2_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai3_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
 &thermal_zones {
 	pmic-thermal {
 		polling-delay-passive = <250>;
@@ -632,6 +874,41 @@
 		>;
 	};
 
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <
+			IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD		0x06000060
+			IMX8DXL_SPI0_CS1_ADMA_SAI0_RXC		0x06000040
+			IMX8DXL_SPI0_SCK_ADMA_SAI0_TXC		0x06000060
+			IMX8DXL_SPI0_SDI_ADMA_SAI0_TXD		0x06000060
+			IMX8DXL_SPI0_SDO_ADMA_SAI0_TXFS		0x06000040
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX8DXL_FLEXCAN0_RX_ADMA_SAI1_TXC	0x06000040
+			IMX8DXL_FLEXCAN0_TX_ADMA_SAI1_TXFS	0x06000040
+			IMX8DXL_FLEXCAN1_RX_ADMA_SAI1_TXD	0x06000060
+			IMX8DXL_FLEXCAN1_TX_ADMA_SAI1_RXD	0x06000060
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			IMX8DXL_SNVS_TAMPER_OUT3_ADMA_SAI2_RXC	0x06000040
+			IMX8DXL_SNVS_TAMPER_IN0_ADMA_SAI2_RXFS	0x06000040
+			IMX8DXL_SNVS_TAMPER_OUT4_ADMA_SAI2_RXD	0x06000060
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			IMX8DXL_SNVS_TAMPER_IN1_ADMA_SAI3_RXC	0x06000040
+			IMX8DXL_SNVS_TAMPER_IN3_ADMA_SAI3_RXFS	0x06000040
+			IMX8DXL_SNVS_TAMPER_IN2_ADMA_SAI3_RXD	0x06000060
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
diff --git a/dts/upstream/src/arm64/freescale/imx8dxl-ss-adma.dtsi b/dts/upstream/src/arm64/freescale/imx8dxl-ss-adma.dtsi
index 5d012c95222..72434529f78 100644
--- a/dts/upstream/src/arm64/freescale/imx8dxl-ss-adma.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8dxl-ss-adma.dtsi
@@ -3,6 +3,63 @@
  * Copyright 2019~2020, 2022 NXP
  */
 
+/delete-node/ &asrc1;
+/delete-node/ &asrc1_lpcg;
+/delete-node/ &adc1;
+/delete-node/ &adc1_lpcg;
+/delete-node/ &amix;
+/delete-node/ &amix_lpcg;
+/delete-node/ &edma1;
+/delete-node/ &esai0;
+/delete-node/ &esai0_lpcg;
+/delete-node/ &sai4;
+/delete-node/ &sai4_lpcg;
+/delete-node/ &sai5;
+/delete-node/ &sai5_lpcg;
+
+&acm {
+	compatible = "fsl,imx8dxl-acm";
+	power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+			<&pd IMX_SC_R_AUDIO_CLK_1>,
+			<&pd IMX_SC_R_MCLK_OUT_0>,
+			<&pd IMX_SC_R_MCLK_OUT_1>,
+			<&pd IMX_SC_R_AUDIO_PLL_0>,
+			<&pd IMX_SC_R_AUDIO_PLL_1>,
+			<&pd IMX_SC_R_ASRC_0>,
+			<&pd IMX_SC_R_SAI_0>,
+			<&pd IMX_SC_R_SAI_1>,
+			<&pd IMX_SC_R_SAI_2>,
+			<&pd IMX_SC_R_SAI_3>,
+			<&pd IMX_SC_R_SPDIF_0>,
+			<&pd IMX_SC_R_MQS_0>;
+	clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_ext_aud_mclk0>,
+		 <&clk_ext_aud_mclk1>,
+		 <&clk_spdif0_rx>,
+		 <&clk_sai0_rx_bclk>,
+		 <&clk_sai0_tx_bclk>,
+		 <&clk_sai1_rx_bclk>,
+		 <&clk_sai1_tx_bclk>,
+		 <&clk_sai2_rx_bclk>,
+		 <&clk_sai3_rx_bclk>;
+	clock-names = "aud_rec_clk0_lpcg_clk",
+		      "aud_rec_clk1_lpcg_clk",
+		      "aud_pll_div_clk0_lpcg_clk",
+		      "aud_pll_div_clk1_lpcg_clk",
+		      "ext_aud_mclk0",
+		      "ext_aud_mclk1",
+		      "spdif0_rx",
+		      "sai0_rx_bclk",
+		      "sai0_tx_bclk",
+		      "sai1_rx_bclk",
+		      "sai1_tx_bclk",
+		      "sai2_rx_bclk",
+		      "sai3_rx_bclk";
+};
+
 &audio_ipg_clk {
 	clock-frequency = <160000000>;
 };
@@ -177,3 +234,24 @@
 &lpspi3 {
 	interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&sai0 {
+	interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai1 {
+	interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai2 {
+	interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai3 {
+	interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spdif0 {
+	interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* rx */
+		     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* tx */
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8dxl-ss-conn.dtsi b/dts/upstream/src/arm64/freescale/imx8dxl-ss-conn.dtsi
index 6d13e4fafb7..1e02b04494e 100644
--- a/dts/upstream/src/arm64/freescale/imx8dxl-ss-conn.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8dxl-ss-conn.dtsi
@@ -108,6 +108,13 @@
 
 };
 
+&dma_apbh {
+	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &enet0_lpcg {
 	clocks = <&conn_enet0_root_clk>,
 		 <&conn_enet0_root_clk>,
@@ -127,6 +134,10 @@
 	assigned-clock-rates = <125000000>;
 };
 
+&gpmi {
+	interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &usdhc1 {
 	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
 	interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-evk.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-evk.dtsi
index 90d1901df2b..930e14fec42 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-evk.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm-evk.dtsi
@@ -400,7 +400,7 @@
 		pinctrl-0 = <&pinctrl_typec1>;
 		reg = <0x50>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <11 8>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 
 		typec1_con: connector {
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-iot-gateway.dts b/dts/upstream/src/arm64/freescale/imx8mm-iot-gateway.dts
new file mode 100644
index 00000000000..370558a8ba4
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8mm-iot-gateway.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2020 CompuLab
+
+#include "imx8mm-ucm-som.dtsi"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+/ {
+	model = "CompuLab i.MX8MM IoT Gateway";
+	compatible = "compulab,imx8mm-iot-gateway", "compulab,imx8mm-ucm-som", "fsl,imx8mm";
+
+	regulator-usbhub-ena {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhub_ena";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-usbhub-rst {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhub_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-mode {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_mode";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-duplex {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_duplex";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-shdn {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_shdn";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-uart1-trmen {
+		compatible = "regulator-fixed";
+		regulator-name = "uart1_trmen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 25 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	regulator-usdhc2-v {
+		compatible = "regulator-fixed";
+		regulator-name = "usdhc2_v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-mpcie2-rst {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie2_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-mpcie2lora-dis {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie2lora_dis";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	pcie0_refclk: clock-pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "host";
+	usb-role-switch;
+	status = "okay";
+
+	usbhub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb9514>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	mmc-ddr-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* mPCIe2 */
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21		0x140
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x140
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40000
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x140
+		>;
+	};
+
+	pinctrl_usb9514: usb9514grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x140 /* USB_PS_EN */
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x140 /* HUB_RSTn */
+		>;
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso b/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
new file mode 100644
index 00000000000..353ace3601d
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Jens Lang <j.lang@phytec.de>
+ *
+ * Tauri-L 2 x RS232:
+ *  - GPIO3_20 uart4_rs485_en needs to be driven low (inactive)
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "phytec,imx8mm-phygate-tauri-l";
+
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	uart4_rs485_en {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "uart4_rs485_en";
+	};
+};
+
+/* UART2 - RS232  */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+/* UART4 - RS232  */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x49
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x49
+		>;
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso b/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
new file mode 100644
index 00000000000..8a75d6783ad
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Jens Lang <j.lang@phytec.de>
+ *
+ * Tauri-L RS232 + RS485:
+ *  - GPIO3_20 uart4_rs485_en needs to be driven high (active)
+ *  - GPIO3_25 RS485_DE Driver enable
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "phytec,imx8mm-phygate-tauri-l";
+
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	uart4_rs485_en {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "uart4_rs485_en";
+	};
+};
+
+/* UART2 - RS232  */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+/* UART4 - RS485  */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	rts-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x49
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x49
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x49
+		>;
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso b/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso
new file mode 100644
index 00000000000..107f743fbb1
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l-rs232-rts-cts.dtso
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Jens Lang <j.lang@phytec.de>
+ *
+ * Tauri-L RS232 with RTS/CTS hardware flow control:
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+
+&{/} {
+	compatible = "phytec,imx8mm-phygate-tauri-l";
+
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+			MX8MM_IOMUXC_UART4_RXD_UART2_DCE_CTS_B	0x00
+			MX8MM_IOMUXC_UART4_TXD_UART2_DCE_RTS_B	0x00
+		>;
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l.dts b/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l.dts
index 27a902569e2..ba6ce3c7f47 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mm-phygate-tauri-l.dts
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mm-phycore-som.dtsi"
 
 / {
@@ -185,6 +186,15 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-tqma8mqml.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-tqma8mqml.dtsi
index 8c0c6e71592..ca0205b9019 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-tqma8mqml.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm-tqma8mqml.dtsi
@@ -62,11 +62,15 @@
 	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-ucm-som.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-ucm-som.dtsi
new file mode 100644
index 00000000000..d3b21203c5f
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8mm-ucm-som.dtsi
@@ -0,0 +1,679 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2018 CompuLab
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		mmc0 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 3000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <222>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		heartbeat-led {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	wlreg_on: regulator-wlreg-on {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "wlreg_on";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	regulator-usdhc3rst {
+		compatible = "regulator-fixed";
+		regulator-name = "usdhc3_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	regulator-fec1rst {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_rst";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		enable-active-high;
+		startup-delay-us = <500>;
+		regulator-boot-on;
+	};
+};
+
+&A53_0 {
+	arm-supply = <&buck2>;
+};
+
+&cpu_alert0 {
+	temperature = <105000>;
+};
+
+&cpu_crit0 {
+	temperature = <115000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@4b {
+		reg = <0x4b>;
+		compatible = "rohm,bd71837";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		#clock-cells = <0>;
+		clocks = <&pmic_osc>;
+		clock-names = "osc";
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	rtc_i2c: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_backlight>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <49152000>;
+	clocks = <&clk IMX8MM_CLK_SAI2_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI2_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&snvs {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "disabled";
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 { /* bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt>;
+		max-speed = <3000000>;
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <4>;
+	non-removable;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x190
+		>;
+	};
+
+	pinctrl_bt: bt0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6		0x19 /* BT_REG_ON */
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7		0x19 /* BT_DEV_WU */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8		0x19 /* BT_HST_WU */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41
+		>;
+	};
+
+	pinctrl_pwm_backlight: pwmbacklightgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT		0x03
+		>;
+	};
+
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0xd6
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX		0x140
+			MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10		0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+			MX8MM_IOMUXC_SD2_WP_GPIO2_IO20			0x00
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw700x.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw700x.dtsi
index de7f67a4ff2..36803b038cd 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw700x.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw700x.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
 
 / {
@@ -113,6 +114,25 @@
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_AMBER>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 	};
 };
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7901.dts b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7901.dts
index 35ae0faa815..136cb30df03 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7901.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7901.dts
@@ -364,8 +364,6 @@
 		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7902.dts b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7902.dts
index c11260c26d0..1d56f2a6c06 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7902.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7902.dts
@@ -314,8 +314,6 @@
 		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7903.dts b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7903.dts
index db1737bf637..45470160f98 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7903.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7903.dts
@@ -280,8 +280,6 @@
 		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7904.dts b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7904.dts
index 05489a31e7f..ef951bc9f0d 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7904.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mm-venice-gw7904.dts
@@ -330,8 +330,6 @@
 		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
diff --git a/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi b/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi
index 98544741ce1..5fa39591419 100644
--- a/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mm-verdin.dtsi
@@ -228,15 +228,16 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 };
 
-/* Verdin CAN_1 (On-module) */
+/* On-module SPI */
 &ecspi3 {
 	#address-cells = <1>;
 	#size-cells = <0>;
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
+	pinctrl-0 = <&pinctrl_ecspi3>, <&pinctrl_tpm_spi_cs>;
 	status = "okay";
 
+	/* Verdin CAN_1 */
 	can1: can@0 {
 		compatible = "microchip,mcp251xfd";
 		clocks = <&clk40m>;
@@ -246,6 +247,12 @@
 		reg = <0>;
 		spi-max-frequency = <8500000>;
 	};
+
+	verdin_som_tpm: tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 /* Verdin ETH_1 (On-module PHY) */
@@ -548,7 +555,7 @@
 
 /* Verdin I2C_2_DSI */
 &i2c2 {
-	clock-frequency = <10000>;
+	clock-frequency = <400000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
@@ -808,8 +815,7 @@
 	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
 		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
 		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
-		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
-		    <&pinctrl_pmic_tpm_ena>;
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
 
 	pinctrl_can1_int: can1intgrp {
 		fsl,pins =
@@ -1111,7 +1117,7 @@
 	};
 
 	/* control signal for optional ATTPM20P or SE050 */
-	pinctrl_pmic_tpm_ena: pmictpmenagrp {
+	pinctrl_tpm_spi_cs: tpmspicsgrp {
 		fsl,pins =
 			<MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x106>;	/* PMIC_TPM_ENA */
 	};
diff --git a/dts/upstream/src/arm64/freescale/imx8mn-tqma8mqnl.dtsi b/dts/upstream/src/arm64/freescale/imx8mn-tqma8mqnl.dtsi
index fb24b9aa1b9..e68a3fd73e1 100644
--- a/dts/upstream/src/arm64/freescale/imx8mn-tqma8mqnl.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mn-tqma8mqnl.dtsi
@@ -60,11 +60,15 @@
 	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/dts/upstream/src/arm64/freescale/imx8mn-venice-gw7902.dts b/dts/upstream/src/arm64/freescale/imx8mn-venice-gw7902.dts
index 0b1fa04f1d6..72004ab6bda 100644
--- a/dts/upstream/src/arm64/freescale/imx8mn-venice-gw7902.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mn-venice-gw7902.dts
@@ -312,8 +312,6 @@
 		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-beacon-kit.dts b/dts/upstream/src/arm64/freescale/imx8mp-beacon-kit.dts
index e5d3901f291..cc9b81d4618 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-beacon-kit.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-beacon-kit.dts
@@ -211,13 +211,12 @@
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai3>;
+			frame-master;
+			bitclock-master;
 		};
 
 		simple-audio-card,codec {
 			sound-dai = <&wm8962>;
-			clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
-			frame-master;
-			bitclock-master;
 		};
 	};
 };
@@ -302,10 +301,18 @@
 
 	adv_bridge: hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		reg-names = "main";
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;
+		avdd-supply = <&buck5>;
+		dvdd-supply = <&buck5>;
+		pvdd-supply = <&buck5>;
+		a2vdd-supply = <&buck5>;
+		v1p2-supply = <&buck5>;
+		v3p3-supply = <&buck4>;
 
 		ports {
 			#address-cells = <1>;
@@ -499,10 +506,9 @@
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
-			  <&clk IMX8MP_AUDIO_PLL2> ;
-	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-	assigned-clock-rates = <12288000>, <361267200>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
 	fsl,sai-mclk-direction-output;
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-beacon-som.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-beacon-som.dtsi
index 8be251b6937..15f7ab58db3 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-beacon-som.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-beacon-som.dtsi
@@ -71,7 +71,6 @@
 
 	mtl_rx_setup: rx-queues-config {
 		snps,rx-queues-to-use = <5>;
-		snps,rx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -106,7 +105,6 @@
 
 	mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <5>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-debix-model-a.dts b/dts/upstream/src/arm64/freescale/imx8mp-debix-model-a.dts
index 9b8f97a84e6..af02af9e533 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-debix-model-a.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-debix-model-a.dts
@@ -20,6 +20,18 @@
 		stdout-path = &uart2;
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -94,6 +106,28 @@
 	};
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -239,6 +273,10 @@
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -356,6 +394,15 @@
 		>;
 	};
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA			0x1c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD				0x19
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC				0x19
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c2
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk2.dts b/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk2.dts
index 3b1c940860e..ebdf13e97b4 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk2.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk2.dts
@@ -69,6 +69,18 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X38";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	led {
 		compatible = "gpio-leds";
 
@@ -184,6 +196,33 @@
 	status = "okay";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 &pcie_phy {
 	clock-names = "ref";
 	clocks = <&hsio_blk_ctrl>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk3.dts b/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk3.dts
index ac7ec7533a3..ef012e8365b 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk3.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-dhcom-pdk3.dts
@@ -75,6 +75,18 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X28";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	led {
 		compatible = "gpio-leds";
 
@@ -248,6 +260,33 @@
 	status = "okay";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2cmuxed1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 &pcie_phy {
 	clocks = <&pcieclk 1>;
 	clock-names = "ref";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-dhcom-som.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-dhcom-som.dtsi
index f5115f9e8c4..a90e28c07e3 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-dhcom-som.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-dhcom-som.dtsi
@@ -78,6 +78,11 @@
 	cpu-supply = <&buck2>;
 };
 
+&audio_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>;
+	assigned-clock-rates = <393216000>;
+};
+
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
@@ -105,14 +110,14 @@
 		#size-cells = <0>;
 
 		/* Up to one of these two PHYs may be populated. */
-		ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */
+		ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio3>;
 			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;
 			pinctrl-names = "default";
-			reg = <0>;
+			reg = <1>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
 			reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>;
@@ -151,14 +156,14 @@
 		#size-cells = <0>;
 
 		/* Up to one PHY may be populated. */
-		ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+		ethphy1f: ethernet-phy@2 { /* SMSC LAN8740Ai */
 			compatible = "ethernet-phy-id0007.c110",
 				     "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio4>;
 			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy1>;
 			pinctrl-names = "default";
-			reg = <1>;
+			reg = <2>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
 			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso b/dts/upstream/src/arm64/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso
new file mode 100644
index 00000000000..1b71890d43d
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	panel-lvds {
+		compatible = "koe,tx26d202vm0bwa";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_vext_3v3>;
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1200>;
+			hfront-porch = <130>;
+			hback-porch = <70>;
+			hsync-len = <30>;
+			vfront-porch = <5>;
+			vback-porch = <5>;
+			vsync-len = <5>;
+			de-active = <1>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+
+				panel_in_odd: endpoint {
+					remote-endpoint = <&ldb_lvds_ch0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+
+				panel_in_even: endpoint {
+					remote-endpoint = <&ldb_lvds_ch1>;
+				};
+			};
+		};
+	};
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_odd>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel_in_even>;
+			};
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-evk.dts b/dts/upstream/src/arm64/freescale/imx8mp-evk.dts
index 8be5b2a57f2..93834770413 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-evk.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-evk.dts
@@ -16,6 +16,16 @@
 		stdout-path = &uart2;
 	};
 
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 100000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <100>;
+		power-supply = <&reg_per_12v>;
+		status = "disabled";
+	};
+
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -96,6 +106,15 @@
 		enable-active-high;
 	};
 
+	reg_per_12v: regulator-per-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "PER_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pca6416 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -114,6 +133,11 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	audio_codec_bt_sco: audio-codec-bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8960-audio";
@@ -145,6 +169,25 @@
 
 	};
 
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec_bt_sco 1>;
+		};
+	};
+
 	sound-hdmi {
 		compatible = "fsl,imx-audio-hdmi";
 		model = "audio-hdmi";
@@ -166,6 +209,19 @@
 		};
 	};
 
+	sound-xcvr {
+		compatible = "fsl,imx-audio-card";
+		model = "imx-audio-xcvr";
+
+		pri-dai-link {
+			link-name = "XCVR PCM";
+
+			cpu {
+				sound-dai = <&xcvr>;
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -251,7 +307,6 @@
 
 	mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <5>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -608,6 +663,17 @@
 	status = "okay";
 };
 
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -694,7 +760,15 @@
 	status = "okay";
 };
 
+&xcvr {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
 &iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
 	pinctrl_audio_pwr_reg: audiopwrreggrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0xd6
@@ -784,6 +858,12 @@
 		>;
 	};
 
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
@@ -880,6 +960,15 @@
 		>;
 	};
 
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00	0xd6
+		>;
+	};
+
 	pinctrl_sai3: sai3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-msc-sm2s-ep1.dts b/dts/upstream/src/arm64/freescale/imx8mp-msc-sm2s-ep1.dts
index da4b1807c27..83194ea7cb8 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -46,6 +46,24 @@
 	};
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
 &i2c1 {
 	sgtl5000: audio-codec@a {
 		compatible = "fsl,sgtl5000";
@@ -92,6 +110,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_smarc_gpio>;
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x10
+		>;
+	};
+
 	pinctrl_sai2: sai2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC   0xd6
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
new file mode 100644
index 00000000000..d7fd9d36f82
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
@@ -0,0 +1,906 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2023-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Martin Schmiedel
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-tqma8mpql.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MP-RAS314";
+	compatible = "tq,imx8mp-tqma8mpql-mba8mp-ras314", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	/* X8 */
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_vcc_12v0>;
+		enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	/* X7 + X8 */
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvdsdisplay>;
+		power-supply = <&reg_vcc_3v3>;
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight_lvds>;
+		status = "disabled";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X9";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x38000000>;
+			alloc-ranges = <0 0x40000000 0 0xB0000000>;
+			linux,cma-default;
+		};
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill>;
+		label = "rfkill-pcie-wlan";
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tq-mba8mp-ras314";
+		audio-cpu = <&sai5>;
+		audio-codec = <&tlv320aic3x04>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR";
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&gpio4>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+
+	gpio-line-names = "WIFI_PMIC_EN", "LVDS_RESET#", "", "",
+			  "", "", "GPIO8", "",
+			  "", "", "", "",
+			  "", "", "GPIO12", "GPIO13",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+
+	wifi-pmic-en-hog {
+		gpio-hog;
+		gpios = <0 0>;
+		output-high;
+		line-name = "WIFI_PMIC_EN";
+	};
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+
+	gpio-line-names = "GPIO22", "GPIO23", "GPIO24", "GPIO25",
+			  "GPIO26", "GPIO27", "CAM_GPIO1", "CAM_GPIO2",
+			  "", "", "GPIO1", "GPIO0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "TEMP_EVENT#", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "HDMI_OC#", "GPIO14", "GPIO15", "GPIO16",
+			  "GPIO17", "PCIE_WAKE#", "GPIO19", "GPIO20",
+			  "PCIE_PERST#", "", "", "";
+
+	pewake-hog {
+		gpio-hog;
+		gpios = <25 0>;
+		input;
+		line-name = "PCIE_WAKE#";
+	};
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpt1_gpio>,
+		    <&pinctrl_gpt2_gpio>, <&pinctrl_gpt3_gpio>;
+
+	gpio-line-names = "", "GPIO18", "", "GPIO3",
+			  "GPIO2", "GPIO21", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "GPIO5", "GPIO6",
+			  "", "", "GPIO11", "GPIO10",
+			  "GPIO9", "GPIO7", "", "GPIO4",
+			  "", "", "", "";
+};
+
+&gpt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpt1>;
+	status = "disabled";
+};
+
+&gpt2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpt2>;
+	status = "disabled";
+};
+
+&gpt3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpt3>;
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+/* X5 + X6 Camera & Display interface */
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* X1 ID_I2C */
+&i2c3 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio2 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tlv320aic3x04>;
+		reg = <0x18>;
+		clock-names = "mclk";
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>;
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		iov-supply = <&reg_vcc_3v3>;
+		ldoin-supply = <&reg_vcc_3v3>;
+	};
+};
+
+/* X1 I2C */
+&i2c5 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio5 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* X1 I2C on GPIO24/GPIO25 */
+&i2c6 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# is connected on MBa8MP-RAS314 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio3>;
+	interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* X1 UART1 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart4 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
+
+/* X1 SD card on GPIO22-GPIO27 */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	disable-wp;
+	bus-width = <4>;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x14>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x140>,
+			   <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x140>,
+			   <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x1c0>,
+			   <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x140>,
+			   <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x140>;
+	};
+
+	pinctrl_ecspi3_gpio: ecspi3gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22		0x80>,
+			   <MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23		0x80>,
+			   <MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24		0x80>,
+			   <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x80>,
+			   <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x80>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x40000044>,
+			   <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x40000044>,
+			   <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90>,
+			   <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90>,
+			   <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90>,
+			   <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x12>,
+			   <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x12>,
+			   <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x14>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02				0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03				0x1c0>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x40000044>,
+			   <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x40000044>,
+			   <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x14>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x1c0>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x14>,
+			   <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x14>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x14>,
+			   <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x14>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00		0x94>,
+			   <MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x94>,
+			   <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x94>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x180>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x80>,
+			   /* PCIE_WAKE# */
+			   <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x180>,
+			   <MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26		0x94>,
+			   <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x94>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01		0x80>,
+			   <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x80>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2>,
+			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2>,
+			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000010>,
+			   <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000154>;
+	};
+
+	pinctrl_gpt1: gpt1grp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_TXD__GPT1_CLK		0x14>;
+	};
+
+	pinctrl_gpt1_gpio: gpt1gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27		0x80>;
+	};
+
+	pinctrl_gpt2: gpt2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK		0x14>;
+	};
+
+	pinctrl_gpt2_gpio: gpt2gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x80>;
+	};
+
+	pinctrl_gpt3: gpt3grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK		0x14>;
+	};
+
+	pinctrl_gpt3_gpio: gpt3gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x80>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001e2>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10	0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x400001e2>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12	0x400001e2>,
+			   <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x400001e2>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03		0x400001e2>,
+			   <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x400001e2>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03		0x400001e2>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x80>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x60>,
+			   <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x94>;
+	};
+
+	pinctrl_lvdsdisplay: lvdsdisplaygrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x10>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT		0x14>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwm3_gpio: pwm3grpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x80>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT		0x14>;
+	};
+
+	pinctrl_pwm4_gpio: pwm4grpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x80>;
+	};
+
+	pinctrl_rfkill: rfkillgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02		0x14>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK		0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00	0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00	0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0x94>,
+			   <MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0x94>;
+	};
+
+	pinctrl_tlv320aic3x04: tlv320aic3x04grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11		0x180>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX	0x14>,
+			   <MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x14>,
+			   <MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS	0x14>,
+			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS	0x14>;
+	};
+
+	pinctrl_uart1_gpio: uart1gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x80>,
+			   <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x80>,
+			   <MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23		0x80>,
+			   <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x80>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX		0x14>,
+			   <MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX	0x14>,
+			   <MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS	0x14>,
+			   <MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS	0x14>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x140>,
+			   <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x140>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140>,
+			   <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26		0x10>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x192>,
+			   <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d2>,
+			   <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d2>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x192>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
+			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c0>;
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index c51ed7d991d..ae64731266f 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -222,11 +222,6 @@
 		#size-cells = <2>;
 		ranges;
 
-		ocram: ocram@900000 {
-			no-map;
-			reg = <0 0x900000 0 0x70000>;
-		};
-
 		/* global autoconfigured region for contiguous allocations */
 		linux,cma {
 			compatible = "shared-dma-pool";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql.dtsi
index ebc29a950ba..336785a9fba 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-tqma8mpql.dtsi
@@ -45,12 +45,16 @@
 
 	flash0: flash@0 {
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <80000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw702x.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw702x.dtsi
index 560c68e4da6..6c75a5ecf56 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw702x.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw702x.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
 
 / {
@@ -102,6 +103,25 @@
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_AMBER>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 	};
 };
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx.dts b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx.dts
index a77e9a44d9f..d765b797284 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx.dts
+++ b/dts/upstream/src/arm64/freescale/imx8mp-venice-gw74xx.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/net/ti-dp83867.h>
 
 #include "imx8mp.dtsi"
 
@@ -225,6 +226,29 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0x0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_AMBER>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+
+				led@2 {
+					reg = <2>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					default-state = "keep";
+				};
+			};
 		};
 	};
 };
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
index 6e6b9c2c464..fbcd93e33ae 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin-dahlia.dtsi
@@ -4,6 +4,18 @@
  */
 
 / {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X21";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,bitclock-master = <&codec_dai>;
@@ -94,6 +106,27 @@
 	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
 };
 
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 /* Current measurement into module VCC */
 &hwmon {
 	status = "okay";
@@ -139,6 +172,10 @@
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	vpcie-supply = <&reg_pcie>;
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin-dev.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin-dev.dtsi
index 42ed44a1171..09733fea036 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin-dev.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin-dev.dtsi
@@ -4,6 +4,18 @@
  */
 
 / {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X37";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	reg_eth2phy: regulator-eth2phy {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -103,6 +115,27 @@
 	vcc-supply = <&reg_1p8v>;
 };
 
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 /* Current measurement into module VCC */
 &hwmon {
 	status = "okay";
@@ -141,6 +174,10 @@
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	status = "okay";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin-mallow.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin-mallow.dtsi
index 1d15f7449c5..3a40338cf2d 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin-mallow.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin-mallow.dtsi
@@ -11,6 +11,18 @@
 #include <dt-bindings/leds/common.h>
 
 / {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X14";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -91,6 +103,27 @@
 	status = "okay";
 };
 
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 /* Temperature sensor on Mallow */
 &hwmon_temp {
 	compatible = "ti,tmp1075";
@@ -117,6 +150,10 @@
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	status = "okay";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin-nonwifi.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin-nonwifi.dtsi
index 91d597391b7..2ee91f31e7f 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin-nonwifi.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin-nonwifi.dtsi
@@ -41,8 +41,7 @@
 	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
 		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
 		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
-		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
-		    <&pinctrl_hdmi_hog>;
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
 };
 
 /*
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin-wifi.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin-wifi.dtsi
index ef94f9a57e2..efcab00c014 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin-wifi.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin-wifi.dtsi
@@ -55,8 +55,7 @@
 	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
 		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
 		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
-		    <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>,
-		    <&pinctrl_hdmi_hog>;
+		    <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>;
 };
 
 /* On-module Bluetooth */
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin-yavia.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin-yavia.dtsi
index a7b261ff3e4..533b7fe218c 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin-yavia.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin-yavia.dtsi
@@ -6,6 +6,18 @@
 #include <dt-bindings/leds/common.h>
 
 / {
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "J15";
+		type = "a";
+
+		port {
+			native_hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	/* Carrier Board Supply +V1.8 */
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
@@ -105,6 +117,27 @@
 	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
 };
 
+/* Verdin HDMI_1 */
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&native_hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &hwmon_temp {
 	status = "okay";
 };
@@ -127,6 +160,10 @@
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 /* Verdin PCIE_1 */
 &pcie {
 	status = "okay";
diff --git a/dts/upstream/src/arm64/freescale/imx8mp-verdin.dtsi b/dts/upstream/src/arm64/freescale/imx8mp-verdin.dtsi
index aef4bef4bcc..d23a3942174 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp-verdin.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp-verdin.dtsi
@@ -241,7 +241,6 @@
 
 	mtl_rx_setup: rx-queues-config {
 		snps,rx-queues-to-use = <5>;
-		snps,rx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -276,7 +275,6 @@
 
 	mtl_tx_setup: tx-queues-config {
 		snps,tx-queues-to-use = <5>;
-		snps,tx-sched-sp;
 
 		queue0 {
 			snps,dcb-algorithm;
@@ -457,6 +455,13 @@
 			  "SODIMM_44";
 };
 
+/* Verdin HDMI_1 */
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+};
+
 /* On-module I2C */
 &i2c1 {
 	clock-frequency = <400000>;
@@ -650,8 +655,7 @@
 
 /* Verdin I2C_2_DSI */
 &i2c2 {
-	/* Lower frequency to avoid DDC/EDID issues with certain displays/screens. */
-	clock-frequency = <10000>;
+	clock-frequency = <400000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
@@ -1117,10 +1121,10 @@
 			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x1c4>;	/* SODIMM 252 */
 	};
 
-	pinctrl_hdmi_hog: hdmihoggrp {
+	pinctrl_hdmi: hdmigrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000019>,	/* SODIMM 63 */
-			<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000019>;	/* SODIMM 61 */
+			<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x140>,	/* SODIMM 63 */
+			<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x180>;	/* SODIMM 61 */
 	};
 
 	/* On-module I2C */
diff --git a/dts/upstream/src/arm64/freescale/imx8mp.dtsi b/dts/upstream/src/arm64/freescale/imx8mp.dtsi
index b92abb5a5c5..603dfe80216 100644
--- a/dts/upstream/src/arm64/freescale/imx8mp.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mp.dtsi
@@ -789,6 +789,23 @@
 						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
 					};
 
+					pgc_mlmix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+								  <&clk IMX8MP_CLK_ML_AXI>,
+								  <&clk IMX8MP_CLK_ML_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>,
+								       <800000000>,
+								       <300000000>;
+					};
+
 					pgc_audio: power-domain@5 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>;
@@ -821,6 +838,12 @@
 						assigned-clock-rates = <800000000>, <400000000>;
 					};
 
+					pgc_vpumix: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+					};
+
 					pgc_gpu3d: power-domain@9 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_GPU3D>;
@@ -836,6 +859,28 @@
 							 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
 					};
 
+					pgc_vpu_g1: power-domain@11 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
+						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+					};
+
+					pgc_vpu_g2: power-domain@12 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
+						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+
+					};
+
+					pgc_vpu_vc8000e: power-domain@13 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
+						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+					};
+
 					pgc_hdmimix: power-domain@14 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_HDMIMIX>;
@@ -873,50 +918,6 @@
 						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
 						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
 					};
-
-					pgc_vpumix: power-domain@19 {
-						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
-						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
-					};
-
-					pgc_vpu_g1: power-domain@20 {
-						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
-						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
-					};
-
-					pgc_vpu_g2: power-domain@21 {
-						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
-						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
-					};
-
-					pgc_vpu_vc8000e: power-domain@22 {
-						#power-domain-cells = <0>;
-						power-domains = <&pgc_vpumix>;
-						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
-						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
-					};
-
-					pgc_mlmix: power-domain@24 {
-						#power-domain-cells = <0>;
-						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
-						clocks = <&clk IMX8MP_CLK_ML_AXI>,
-							 <&clk IMX8MP_CLK_ML_AHB>,
-							 <&clk IMX8MP_CLK_NPU_ROOT>;
-						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
-								  <&clk IMX8MP_CLK_ML_AXI>,
-								  <&clk IMX8MP_CLK_ML_AHB>;
-						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
-									 <&clk IMX8MP_SYS_PLL1_800M>,
-									 <&clk IMX8MP_SYS_PLL1_800M>;
-						assigned-clock-rates = <800000000>,
-								       <800000000>,
-								       <300000000>;
-					};
 				};
 			};
 		};
@@ -1540,6 +1541,31 @@
 					dma-names = "tx";
 					status = "disabled";
 				};
+
+				xcvr: xcvr@30cc0000 {
+					compatible = "fsl,imx8mp-xcvr";
+					reg = <0x30cc0000 0x800>,
+					      <0x30cc0800 0x400>,
+					      <0x30cc0c00 0x080>,
+					      <0x30cc0e00 0x080>;
+					reg-names = "ram", "regs", "rxfifo",
+						    "txfifo";
+					interrupts = /* XCVR IRQ 0 */
+						     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+						     /* XCVR IRQ 1 */
+						     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+						     /* XCVR PHY - SPDIF wakeup IRQ */
+						     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_EARC_IPG>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_EARC_PHY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>;
+					clock-names = "ipg", "phy", "spba", "pll_ipg";
+					dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>;
+					dma-names = "rx", "tx";
+					resets = <&audio_blk_ctrl 0>;
+					status = "disabled";
+				};
 			};
 
 			sdma3: dma-controller@30e00000 {
@@ -1568,6 +1594,7 @@
 				compatible = "fsl,imx8mp-audio-blk-ctrl";
 				reg = <0x30e20000 0x10000>;
 				#clock-cells = <1>;
+				#reset-cells = <1>;
 				clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
 					 <&clk IMX8MP_CLK_SAI1>,
 					 <&clk IMX8MP_CLK_SAI2>,
@@ -1579,6 +1606,9 @@
 					      "sai1", "sai2", "sai3",
 					      "sai5", "sai6", "sai7";
 				power-domains = <&pgc_audio>;
+				assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>,
+						  <&clk IMX8MP_AUDIO_PLL2>;
+				assigned-clock-rates = <393216000>, <361267200>;
 			};
 		};
 
@@ -1946,7 +1976,7 @@
 			};
 
 			irqsteer_hdmi: interrupt-controller@32fc2000 {
-				compatible = "fsl,imx-irqsteer";
+				compatible = "fsl,imx8mp-irqsteer", "fsl,imx-irqsteer";
 				reg = <0x32fc2000 0x1000>;
 				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
diff --git a/dts/upstream/src/arm64/freescale/imx8mq-librem5.dtsi b/dts/upstream/src/arm64/freescale/imx8mq-librem5.dtsi
index ffb5fe61630..1b39514d5c1 100644
--- a/dts/upstream/src/arm64/freescale/imx8mq-librem5.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mq-librem5.dtsi
@@ -45,7 +45,6 @@
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <50>;
-			wakeup-source;
 		};
 
 		key-vol-up {
@@ -53,7 +52,6 @@
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <50>;
-			wakeup-source;
 		};
 	};
 
diff --git a/dts/upstream/src/arm64/freescale/imx8mq-tqma8mq.dtsi b/dts/upstream/src/arm64/freescale/imx8mq-tqma8mq.dtsi
index 5ca6b225254..01e5092e4c4 100644
--- a/dts/upstream/src/arm64/freescale/imx8mq-tqma8mq.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8mq-tqma8mq.dtsi
@@ -251,11 +251,15 @@
 	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <84000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/dts/upstream/src/arm64/freescale/imx8qm-mek.dts b/dts/upstream/src/arm64/freescale/imx8qm-mek.dts
index 6e05361c1ff..778741dbbb3 100644
--- a/dts/upstream/src/arm64/freescale/imx8qm-mek.dts
+++ b/dts/upstream/src/arm64/freescale/imx8qm-mek.dts
@@ -40,12 +40,99 @@
 		enable-active-high;
 	};
 
+	reg_fec2_supply: regulator-fec2-nvcc {
+		compatible = "regulator-fixed";
+		regulator-name = "fec2_nvcc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can01_en: regulator-can01-gen {
+		compatible = "regulator-fixed";
+		regulator-name = "can01-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_en: regulator-can2-gen {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can01_stby: regulator-can01-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can01-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can01_en>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can2_en>;
+	};
+
 	reg_vref_1v8: regulator-adc-vref {
 		compatible = "regulator-fixed";
 		regulator-name = "vref_1v8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	bt_sco_codec: audio-codec-bt {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai0>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960>;
+		hp-det-gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		audio-routing =	"Headphone Jack", "HP_L",
+				"Headphone Jack", "HP_R",
+				"Ext Spk", "SPK_LP",
+				"Ext Spk", "SPK_LN",
+				"Ext Spk", "SPK_RP",
+				"Ext Spk", "SPK_RN",
+				"LINPUT1", "Mic Jack",
+				"Mic Jack", "MICB";
+	};
 };
 
 &adc0 {
@@ -55,6 +142,78 @@
 	status = "okay";
 };
 
+&amix {
+	status = "okay";
+};
+
+&asrc0 {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
+&cm41_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cm41_i2c>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&cm41_intmux {
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lsm303agr-accel";
+		reg = <0x19>;
+	};
+
+	gyrometer@20 {
+		compatible = "nxp,fxas21002c";
+		reg = <0x20>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gyrometer@69 {
+		compatible = "st,l3g4200d-gyro";
+		reg = <0x69>;
+	};
+};
+
 &i2c1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -65,6 +224,42 @@
 	scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>;
 	sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>;
 	status = "okay";
+
+	wm8960: audio-codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "mclk";
+		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <2 2 3>;
+		wlf,gpio-cfg = <1 3>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can01_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can01_stby>;
+	status = "okay";
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
 };
 
 &lpuart0 {
@@ -100,6 +295,14 @@
 	};
 };
 
+&lsio_mu5 {
+	status = "okay";
+};
+
+&lsio_mu6 {
+	status = "okay";
+};
+
 &flexspi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexspi0>;
@@ -140,6 +343,19 @@
 	};
 };
 
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec2_supply>;
+	nvmem-cells = <&fec_mac1>;
+	nvmem-cell-names = "mac-address";
+	rx-internal-delay-ps = <2000>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -160,7 +376,71 @@
 	status = "okay";
 };
 
+&sai0 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai0_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai0>;
+	status = "okay";
+};
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai6 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI6_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai6_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&sai7 {
+	assigned-clocks = <&acm IMX_ADMA_ACM_SAI7_MCLK_SEL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai7_lpcg IMX_LPCG_CLK_4>;
+	assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+	assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
 &iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0			0x0600004c
+			IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31			0x0600004c
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL			0x06000021
+			IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA			0x06000021
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c
@@ -181,6 +461,13 @@
 		>;
 	};
 
+	pinctrl_cm41_i2c: cm41i2cgrp {
+		fsl,pins = <
+			IMX8QM_M41_I2C0_SDA_M41_I2C0_SDA			0x0600004c
+			IMX8QM_M41_I2C0_SCL_M41_I2C0_SCL			0x0600004c
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
@@ -235,6 +522,45 @@
 		>;
 	};
 
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <
+			IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD		0x000014a0
+			IMX8QM_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL	0x00000060
+			IMX8QM_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC		0x00000060
+			IMX8QM_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0		0x00000060
+			IMX8QM_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1		0x00000060
+			IMX8QM_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2		0x00000060
+			IMX8QM_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3		0x00000060
+			IMX8QM_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC		0x00000060
+			IMX8QM_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL	0x00000060
+			IMX8QM_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0		0x00000060
+			IMX8QM_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1		0x00000060
+			IMX8QM_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2		0x00000060
+			IMX8QM_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3		0x00000060
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <
+			IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX			0x21
+			IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX			0x21
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <
+			IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX			0x21
+			IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX			0x21
+		>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <
+			IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX			0x21
+			IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX			0x21
+		>;
+	};
+
 	pinctrl_lpuart0: lpuart0grp {
 		fsl,pins = <
 			IMX8QM_UART0_RX_DMA_UART0_RX				0x06000020
@@ -256,6 +582,24 @@
 		>;
 	};
 
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <
+			IMX8QM_SPI0_CS1_AUD_SAI0_TXC				0x0600004c
+			IMX8QM_SPI2_CS1_AUD_SAI0_TXFS				0x0600004c
+			IMX8QM_SAI1_RXFS_AUD_SAI0_RXD				0x0600004c
+			IMX8QM_SAI1_RXC_AUD_SAI0_TXD				0x0600006c
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			IMX8QM_SAI1_RXD_AUD_SAI1_RXD				0x06000040
+			IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS				0x06000040
+			IMX8QM_SAI1_TXD_AUD_SAI1_TXD				0x06000060
+			IMX8QM_SAI1_TXC_AUD_SAI1_TXC				0x06000040
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041
diff --git a/dts/upstream/src/arm64/freescale/imx8qm-ss-audio.dtsi b/dts/upstream/src/arm64/freescale/imx8qm-ss-audio.dtsi
new file mode 100644
index 00000000000..3036af49fc8
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx8qm-ss-audio.dtsi
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+/delete-node/ &acm;
+/delete-node/ &sai4;
+/delete-node/ &sai5;
+/delete-node/ &sai4_lpcg;
+/delete-node/ &sai5_lpcg;
+
+&amix {
+	dais = <&sai6>, <&sai7>;
+};
+
+&asrc0 {
+	clocks = <&asrc0_lpcg IMX_LPCG_CLK_0>,
+		 <&asrc0_lpcg IMX_LPCG_CLK_2>,
+		 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_ASRC_0>;
+};
+
+&asrc0_lpcg {
+	clocks = <&audio_ipg_clk>,
+		 <&audio_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>;
+	clock-output-names = "asrc0_lpcg_ipg_clk", "asrc0_lpcg_mem_clk";
+};
+
+&asrc1 {
+	clocks = <&asrc1_lpcg IMX_LPCG_CLK_0>,
+		 <&asrc1_lpcg IMX_LPCG_CLK_2>,
+		 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+		 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+		 <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_ASRC_1>;
+};
+
+&asrc1_lpcg {
+	clocks = <&audio_ipg_clk>, <&audio_ipg_clk>;
+	clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>;
+	clock-output-names = "asrc1_lpcg_ipg_clk", "asrc1_lpcg_mem_clk";
+};
+
+&audio_subsys {
+
+	sai4: sai@59080000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59080000 0x10000>;
+		interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai4_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai4_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 18 0 1>;
+		fsl,dataline = <0 0xf 0x0>;
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+		status = "disabled";
+	};
+
+	sai5: sai@59090000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59090000 0x10000>;
+		interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai5_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai5_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "tx";
+		dmas = <&edma0 19 0 0>;
+		fsl,dataline = <0 0x0 0xf>;
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+		status = "disabled";
+	};
+
+	sai4_lpcg: clock-controller@59480000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59480000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai4_lpcg_mclk", "sai4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_4>;
+		status = "disabled";
+	};
+
+	sai5_lpcg: clock-controller@59490000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59490000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai5_lpcg_mclk", "sai5_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_5>;
+		status = "disabled";
+	};
+
+	esai1: esai@59810000 {
+		compatible = "fsl,imx8qm-esai";
+		reg = <0x59810000 0x10000>;
+		interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&esai1_lpcg IMX_LPCG_CLK_0>,
+			 <&esai1_lpcg IMX_LPCG_CLK_4>,
+			 <&esai1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>;
+		clock-names = "core", "extal", "fsys", "spba";
+		dmas = <&edma1 6 0 1>, <&edma1 7 0 0>;
+		dma-names = "rx", "tx";
+		power-domains = <&pd IMX_SC_R_ESAI_1>;
+		status = "disabled";
+	};
+
+	sai6: sai@59820000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59820000 0x10000>;
+		interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai6_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai6_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma1 8 0 1>, <&edma1 9 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_6>;
+		status = "disabled";
+	};
+
+	sai7: sai@59830000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59830000 0x10000>;
+		interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai7_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_dummy>,
+			 <&sai7_lpcg IMX_LPCG_CLK_4>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "tx";
+		dmas = <&edma1 10 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_7>;
+		status = "disabled";
+	};
+
+	esai1_lpcg: clock-controller@59c10000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_ESAI1_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "esai1_lpcg_extal_clk", "esai1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ESAI_1>;
+	};
+
+	sai6_lpcg: clock-controller@59c20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI6_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai6_lpcg_mclk", "sai6_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_6>;
+	};
+
+	sai7_lpcg: clock-controller@59c30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59c30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI7_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+		clock-output-names = "sai7_lpcg_mclk", "sai7_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_7>;
+	};
+
+	acm: acm@59e00000 {
+		compatible = "fsl,imx8qm-acm";
+		reg = <0x59e00000 0x1d0000>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+				<&pd IMX_SC_R_AUDIO_CLK_1>,
+				<&pd IMX_SC_R_MCLK_OUT_0>,
+				<&pd IMX_SC_R_MCLK_OUT_1>,
+				<&pd IMX_SC_R_AUDIO_PLL_0>,
+				<&pd IMX_SC_R_AUDIO_PLL_1>,
+				<&pd IMX_SC_R_ASRC_0>,
+				<&pd IMX_SC_R_ASRC_1>,
+				<&pd IMX_SC_R_ESAI_0>,
+				<&pd IMX_SC_R_ESAI_1>,
+				<&pd IMX_SC_R_SAI_0>,
+				<&pd IMX_SC_R_SAI_1>,
+				<&pd IMX_SC_R_SAI_2>,
+				<&pd IMX_SC_R_SAI_3>,
+				<&pd IMX_SC_R_SAI_4>,
+				<&pd IMX_SC_R_SAI_5>,
+				<&pd IMX_SC_R_SAI_6>,
+				<&pd IMX_SC_R_SAI_7>,
+				<&pd IMX_SC_R_SPDIF_0>,
+				<&pd IMX_SC_R_SPDIF_1>,
+				<&pd IMX_SC_R_MQS_0>;
+		clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_mlb_clk>,
+			 <&clk_hdmi_rx_mclk>,
+			 <&clk_ext_aud_mclk0>,
+			 <&clk_ext_aud_mclk1>,
+			 <&clk_esai0_rx_clk>,
+			 <&clk_esai0_rx_hf_clk>,
+			 <&clk_esai0_tx_clk>,
+			 <&clk_esai0_tx_hf_clk>,
+			 <&clk_esai1_rx_clk>,
+			 <&clk_esai1_rx_hf_clk>,
+			 <&clk_esai1_tx_clk>,
+			 <&clk_esai1_tx_hf_clk>,
+			 <&clk_spdif0_rx>,
+			 <&clk_spdif0_rx>,
+			 <&clk_sai0_rx_bclk>,
+			 <&clk_sai0_tx_bclk>,
+			 <&clk_sai1_rx_bclk>,
+			 <&clk_sai1_tx_bclk>,
+			 <&clk_sai2_rx_bclk>,
+			 <&clk_sai3_rx_bclk>,
+			 <&clk_sai4_rx_bclk>,
+			 <&clk_sai5_rx_bclk>,
+			 <&clk_sai6_rx_bclk>;
+		clock-names = "aud_rec_clk0_lpcg_clk",
+			      "aud_rec_clk1_lpcg_clk",
+			      "aud_pll_div_clk0_lpcg_clk",
+			      "aud_pll_div_clk1_lpcg_clk",
+			      "mlb_clk",
+			      "hdmi_rx_mclk",
+			      "ext_aud_mclk0",
+			      "ext_aud_mclk1",
+			      "esai0_rx_clk",
+			      "esai0_rx_hf_clk",
+			      "esai0_tx_clk",
+			      "esai0_tx_hf_clk",
+			      "esai1_rx_clk",
+			      "esai1_rx_hf_clk",
+			      "esai1_tx_clk",
+			      "esai1_tx_hf_clk",
+			      "spdif0_rx",
+			      "spdif1_rx",
+			      "sai0_rx_bclk",
+			      "sai0_tx_bclk",
+			      "sai1_rx_bclk",
+			      "sai1_tx_bclk",
+			      "sai2_rx_bclk",
+			      "sai3_rx_bclk",
+			      "sai4_rx_bclk",
+			      "sai5_tx_bclk",
+			      "sai6_rx_bclk";
+	};
+};
+
+&dsp_lpcg {
+	status = "disabled";
+};
+
+&dsp_ram_lpcg {
+	status = "disabled";
+};
+
+/* edma2 called in imx8qm RM with the same address in edma0 of imx8qxp */
+&edma0{
+	reg = <0x591f0000 0x150000>;
+	dma-channels = <20>;
+	dma-channel-mask = <0>;
+	interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* asrc0 */
+		     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* esai0 */
+		     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */
+		     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, /* spdif1 */
+		     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */
+		     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */
+		     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */
+		     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */
+		     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */
+		     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */
+	power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
+			<&pd IMX_SC_R_DMA_2_CH1>,
+			<&pd IMX_SC_R_DMA_2_CH2>,
+			<&pd IMX_SC_R_DMA_2_CH3>,
+			<&pd IMX_SC_R_DMA_2_CH4>,
+			<&pd IMX_SC_R_DMA_2_CH5>,
+			<&pd IMX_SC_R_DMA_2_CH6>,
+			<&pd IMX_SC_R_DMA_2_CH7>,
+			<&pd IMX_SC_R_DMA_2_CH8>,
+			<&pd IMX_SC_R_DMA_2_CH9>,
+			<&pd IMX_SC_R_DMA_2_CH10>,
+			<&pd IMX_SC_R_DMA_2_CH11>,
+			<&pd IMX_SC_R_DMA_2_CH12>,
+			<&pd IMX_SC_R_DMA_2_CH13>,
+			<&pd IMX_SC_R_DMA_2_CH14>,
+			<&pd IMX_SC_R_DMA_2_CH15>,
+			<&pd IMX_SC_R_DMA_2_CH16>,
+			<&pd IMX_SC_R_DMA_2_CH17>,
+			<&pd IMX_SC_R_DMA_2_CH18>,
+			<&pd IMX_SC_R_DMA_2_CH19>;
+};
+
+/* edma3 called in imx8qm RM with the same address in edma1 of imx8qxp */
+&edma1{
+	reg = <0x599f0000 0xc0000>;
+	dma-channels = <11>;
+	dma-channel-mask = <0xc0>;
+	interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* asrc1 */
+		     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */
+		     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai6 */
+		     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai7 */
+	power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+			<&pd IMX_SC_R_DMA_3_CH1>,
+			<&pd IMX_SC_R_DMA_3_CH2>,
+			<&pd IMX_SC_R_DMA_3_CH3>,
+			<&pd IMX_SC_R_DMA_3_CH4>,
+			<&pd IMX_SC_R_DMA_3_CH5>,
+			<&pd IMX_SC_R_DMA_3_CH6>,
+			<&pd IMX_SC_R_DMA_3_CH7>,
+			<&pd IMX_SC_R_DMA_3_CH8>,
+			<&pd IMX_SC_R_DMA_3_CH9>,
+			<&pd IMX_SC_R_DMA_3_CH10>;
+};
+
+&esai0 {
+	clocks = <&esai0_lpcg IMX_LPCG_CLK_0>,
+		 <&esai0_lpcg IMX_LPCG_CLK_4>,
+		 <&esai0_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_ESAI_0>;
+};
+
+&esai0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "esai0_lpcg_extal_clk", "esai0_lpcg_ipg_clk";
+};
+
+&mqs0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "mqs0_lpcg_mclk", "mqs0_lpcg_ipg_clk";
+};
+
+&sai0 {
+	clocks = <&sai0_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai0_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_0>;
+};
+
+&sai0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai0_lpcg_mclk", "sai0_lpcg_ipg_clk";
+};
+
+&sai1 {
+	clocks = <&sai1_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai1_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_1>;
+};
+
+&sai1_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai1_lpcg_mclk", "sai1_lpcg_ipg_clk";
+};
+
+&sai2 {
+	clocks = <&sai2_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai2_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_2>;
+};
+
+&sai2_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai2_lpcg_mclk", "sai2_lpcg_ipg_clk";
+};
+
+&sai3 {
+	clocks = <&sai3_lpcg IMX_LPCG_CLK_0>,
+		 <&clk_dummy>,
+		 <&sai3_lpcg IMX_LPCG_CLK_4>,
+		 <&clk_dummy>,
+		 <&clk_dummy>;
+	power-domains = <&pd IMX_SC_R_SAI_3>;
+};
+
+&sai3_lpcg {
+	clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+	clock-output-names = "sai3_lpcg_mclk", "sai3_lpcg_ipg_clk";
+};
+
+&spdif0 {
+	clocks = <&spdif0_lpcg IMX_LPCG_CLK_4>,	/* core */
+		 <&clk_dummy>,			/* rxtx0 */
+		 <&spdif0_lpcg IMX_LPCG_CLK_5>,	/* rxtx1 */
+		 <&clk_dummy>,			/* rxtx2 */
+		 <&clk_dummy>,			/* rxtx3 */
+		 <&clk_dummy>,			/* rxtx4 */
+		 <&audio_ipg_clk>,		/* rxtx5 */
+		 <&clk_dummy>,			/* rxtx6 */
+		 <&clk_dummy>,			/* rxtx7 */
+		 <&clk_dummy>;			/* spba */
+	power-domains = <&pd IMX_SC_R_SPDIF_0>;
+};
+
+&spdif0_lpcg {
+	clock-indices = <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_4>;
+	clock-output-names = "spdif0_lpcg_tx_clk", "spdif0_lpcg_gclkw";
+};
diff --git a/dts/upstream/src/arm64/freescale/imx8qm.dtsi b/dts/upstream/src/arm64/freescale/imx8qm.dtsi
index b3d01677b70..61986e0639e 100644
--- a/dts/upstream/src/arm64/freescale/imx8qm.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx8qm.dtsi
@@ -333,6 +333,21 @@
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
 
+		ocotp: ocotp {
+			compatible = "fsl,imx8qm-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			read-only;
+
+			fec_mac0: mac@1c4 {
+				reg = <0x1c4 6>;
+			};
+
+			fec_mac1: mac@1c6 {
+				reg = <0x1c6 6>;
+			};
+		};
+
 		tsens: thermal-sensor {
 			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
 			#thermal-sensor-cells = <1>;
@@ -461,8 +476,95 @@
 		};
 	};
 
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
+	clk_esai1_rx_clk: clock-esai1-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_rx_clk";
+	};
+
+	clk_esai1_rx_hf_clk: clock-esai1-rx-hf {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_rx_hf_clk";
+	};
+
+	clk_esai1_tx_clk: clock-esai1-tx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_tx_clk";
+	};
+
+	clk_esai1_tx_hf_clk: clock-esai1-tx-hf {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "esai1_tx_hf_clk";
+	};
+
+	clk_hdmi_rx_mclk: clock-hdmi-rx-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "hdmi-rx-mclk";
+	};
+
+	clk_mlb_clk: clock-mlb-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "mlb_clk";
+	};
+
+	clk_sai5_rx_bclk: clock-sai5-rx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai5_rx_bclk";
+	};
+
+	clk_sai5_tx_bclk: clock-sai5-tx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai5_tx_bclk";
+	};
+
+	clk_sai6_rx_bclk: clock-sai6-rx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai6_rx_bclk";
+	};
+
+	clk_sai6_tx_bclk: clock-sai6-tx-bclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "sai6_tx_bclk";
+	};
+
+	clk_spdif1_rx: clock-spdif1-rx {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "spdif1_rx";
+	};
+
 	/* sorted in register address */
+	#include "imx8-ss-cm41.dtsi"
+	#include "imx8-ss-audio.dtsi"
 	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-gpu0.dtsi"
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-dma.dtsi"
 	#include "imx8-ss-conn.dtsi"
@@ -473,3 +575,4 @@
 #include "imx8qm-ss-dma.dtsi"
 #include "imx8qm-ss-conn.dtsi"
 #include "imx8qm-ss-lsio.dtsi"
+#include "imx8qm-ss-audio.dtsi"
diff --git a/dts/upstream/src/arm64/freescale/imx8qxp-mek.dts b/dts/upstream/src/arm64/freescale/imx8qxp-mek.dts
index cee13e58762..936ba5ecdca 100644
--- a/dts/upstream/src/arm64/freescale/imx8qxp-mek.dts
+++ b/dts/upstream/src/arm64/freescale/imx8qxp-mek.dts
@@ -63,6 +63,7 @@
 };
 
 &dsp {
+	memory-region = <&dsp_reserved>;
 	status = "okay";
 };
 
diff --git a/dts/upstream/src/arm64/freescale/imx93-11x11-evk.dts b/dts/upstream/src/arm64/freescale/imx93-11x11-evk.dts
index bd98eff4d68..a15987f49e8 100644
--- a/dts/upstream/src/arm64/freescale/imx93-11x11-evk.dts
+++ b/dts/upstream/src/arm64/freescale/imx93-11x11-evk.dts
@@ -97,89 +97,6 @@
 	status = "okay";
 };
 
-&mu1 {
-	status = "okay";
-};
-
-&mu2 {
-	status = "okay";
-};
-
-&lpi2c3 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpi2c3>;
-	status = "okay";
-
-	ptn5110: tcpc@50 {
-		compatible = "nxp,ptn5110", "tcpci";
-		reg = <0x50>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-
-		typec1_con: connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "dual";
-			data-role = "dual";
-			try-power-role = "sink";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-				     PDO_VAR(5000, 20000, 3000)>;
-			op-sink-microwatt = <15000000>;
-			self-powered;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					typec1_dr_sw: endpoint {
-						remote-endpoint = <&usb1_drd_sw>;
-					};
-				};
-			};
-		};
-	};
-
-	ptn5110_2: tcpc@51 {
-		compatible = "nxp,ptn5110", "tcpci";
-		reg = <0x51>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-
-		typec2_con: connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "dual";
-			data-role = "dual";
-			try-power-role = "sink";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-				     PDO_VAR(5000, 20000, 3000)>;
-			op-sink-microwatt = <15000000>;
-			self-powered;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					typec2_dr_sw: endpoint {
-						remote-endpoint = <&usb2_drd_sw>;
-					};
-				};
-			};
-		};
-	};
-};
-
 &eqos {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -228,81 +145,6 @@
 	};
 };
 
-&lpuart1 { /* console */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&lpuart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "otg";
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-	usb-role-switch;
-	disable-over-current;
-	samsung,picophy-pre-emp-curr-control = <3>;
-	samsung,picophy-dc-vol-level-adjust = <7>;
-	status = "okay";
-
-	port {
-		usb1_drd_sw: endpoint {
-			remote-endpoint = <&typec1_dr_sw>;
-		};
-	};
-};
-
-&usbotg2 {
-	dr_mode = "otg";
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-	usb-role-switch;
-	disable-over-current;
-	samsung,picophy-pre-emp-curr-control = <3>;
-	samsung,picophy-dc-vol-level-adjust = <7>;
-	status = "okay";
-
-	port {
-		usb2_drd_sw: endpoint {
-			remote-endpoint = <&typec2_dr_sw>;
-		};
-	};
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
-	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_usdhc2_vmmc>;
-	bus-width = <4>;
-	status = "okay";
-	no-mmc;
-};
-
-&wdog3 {
-	status = "okay";
-};
-
 &lpi2c2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -402,11 +244,79 @@
 };
 
 &lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpi2c3>;
 	status = "okay";
 
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	ptn5110_2: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x51>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+		typec2_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec2_dr_sw: endpoint {
+						remote-endpoint = <&usb2_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
 	pcf2131: rtc@53 {
 		compatible = "nxp,pcf2131";
 		reg = <0x53>;
@@ -415,6 +325,89 @@
 	};
 };
 
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb2_drd_sw: endpoint {
+			remote-endpoint = <&typec2_dr_sw>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-mmc;
+};
+
+&wdog3 {
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
diff --git a/dts/upstream/src/arm64/freescale/imx93-9x9-qsb.dts b/dts/upstream/src/arm64/freescale/imx93-9x9-qsb.dts
new file mode 100644
index 00000000000..950dece83c2
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx93-9x9-qsb.dts
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx93.dtsi"
+
+/ {
+	model = "NXP i.MX93 9x9 Quick Start Board";
+	compatible = "fsl,imx93-9x9-qsb", "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4010000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021e000 {
+			reg = <0 0x2021e000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "VREF_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_rpi_3v3: regulator-rpi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_RPI_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2237500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-mmc;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x58e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL		0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX	0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX		0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B	0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B	0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x1582
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x40001382
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001382
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001382
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001382
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x40001382
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000138e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/imx93-tqma9352-mba93xxca.dts b/dts/upstream/src/arm64/freescale/imx93-tqma9352-mba93xxca.dts
index af795ecf678..852dd3d2eac 100644
--- a/dts/upstream/src/arm64/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/dts/upstream/src/arm64/freescale/imx93-tqma9352-mba93xxca.dts
@@ -303,6 +303,32 @@
 		reg = <0x1c>;
 	};
 
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
 	eeprom2: eeprom@54 {
 		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x54>;
@@ -371,18 +397,6 @@
 				  "WLAN_PERST#", "12V_EN";
 
 		/*
-		 * Controls the on board USB Hub reset which is low
-		 * active as reset signal. The output-low states, the
-		 * signal is inactive, e.g. no reset
-		 */
-		usb-reset-hog {
-			gpio-hog;
-			gpios = <2 GPIO_ACTIVE_LOW>;
-			output-low;
-			line-name = "USB_RESET#";
-		};
-
-		/*
 		 * Controls the WiFi card PD pin which is low active
 		 * as power down signal. The output-high states, the signal
 		 * is active, e.g. card is powered down
@@ -492,6 +506,41 @@
 	status = "okay";
 };
 
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
diff --git a/dts/upstream/src/arm64/freescale/imx93-tqma9352-mba93xxla.dts b/dts/upstream/src/arm64/freescale/imx93-tqma9352-mba93xxla.dts
index eb3f4cfb698..e2ee9f5a042 100644
--- a/dts/upstream/src/arm64/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/dts/upstream/src/arm64/freescale/imx93-tqma9352-mba93xxla.dts
@@ -252,6 +252,32 @@
 		reg = <0x1c>;
 	};
 
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
 	eeprom2: eeprom@54 {
 		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x54>;
@@ -433,12 +459,47 @@
 	pinctrl-0 = <&pinctrl_tpm5>;
 };
 
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	no-sdio;
diff --git a/dts/upstream/src/arm64/freescale/imx93-tqma9352.dtsi b/dts/upstream/src/arm64/freescale/imx93-tqma9352.dtsi
index 9d2328c185c..72a9a5d4e27 100644
--- a/dts/upstream/src/arm64/freescale/imx93-tqma9352.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx93-tqma9352.dtsi
@@ -19,7 +19,7 @@
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
-			alloc-ranges = <0 0x60000000 0 0x40000000>;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
 			size = <0 0x10000000>;
 			linux,cma-default;
 		};
@@ -75,6 +75,12 @@
 		spi-max-frequency = <62000000>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -150,6 +156,7 @@
 &wdog3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
 
diff --git a/dts/upstream/src/arm64/freescale/imx93.dtsi b/dts/upstream/src/arm64/freescale/imx93.dtsi
index 4a3f42355cb..a0993022c10 100644
--- a/dts/upstream/src/arm64/freescale/imx93.dtsi
+++ b/dts/upstream/src/arm64/freescale/imx93.dtsi
@@ -1105,7 +1105,7 @@
 							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
 				assigned-clock-rates = <100000000>, <250000000>;
 				intf_mode = <&wakeupmix_gpr 0x28>;
-				snps,clk-csr = <0>;
+				snps,clk-csr = <6>;
 				nvmem-cells = <&eth_mac2>;
 				nvmem-cell-names = "mac-address";
 				status = "disabled";
diff --git a/dts/upstream/src/arm64/freescale/imx95-19x19-evk.dts b/dts/upstream/src/arm64/freescale/imx95-19x19-evk.dts
new file mode 100644
index 00000000000..d14a54ab4fd
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx95-19x19-evk.dts
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include "imx95.dtsi"
+
+/ {
+	model = "NXP i.MX95 19X19 board";
+	compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
+
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7f000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	reg_m2_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&i2c7_pcal6524 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE_WLAN_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_m2_pwr>;
+		gpio = <&i2c7_pcal6524 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_slot_pwr: regulator-slot-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIe slot-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&i2c7_pcal6524 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VDD_SD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&lpi2c7 {
+	clock-frequency = <1000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c7>;
+	status = "okay";
+
+	i2c7_pcal6524: i2c7-gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_pcal6524>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&lpuart1 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&mu7 {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_slot_pwr>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_i2c7_pcal6524: i2c7pcal6524grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16			0x31e
+		>;
+	};
+
+	pinctrl_lpi2c7: lpi2c7grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO08__LPI2C7_SDA			0x40000b9e
+			IMX95_PAD_GPIO_IO09__LPI2C7_SCL			0x40000b9e
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x4000031e
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B		0x4000031e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX      0x31e
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX      0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK			0x15fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD			0x13fe
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0		0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1		0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2		0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3		0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4		0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5		0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6		0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7		0x13fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE		0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK			0x15fe
+			IMX95_PAD_SD2_CMD__USDHC2_CMD			0x13fe
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0		0x13fe
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1		0x13fe
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2		0x13fe
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3		0x13fe
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/imx95-clock.h b/dts/upstream/src/arm64/freescale/imx95-clock.h
new file mode 100644
index 00000000000..e1f91203e79
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx95-clock.h
@@ -0,0 +1,187 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __CLOCK_IMX95_H
+#define __CLOCK_IMX95_H
+
+/* The index should match i.MX95 SCMI Firmware */
+#define IMX95_CLK_32K                       1
+#define IMX95_CLK_24M                       2
+#define IMX95_CLK_FRO                       3
+#define IMX95_CLK_SYSPLL1_VCO               4
+#define IMX95_CLK_SYSPLL1_PFD0_UNGATED      5
+#define IMX95_CLK_SYSPLL1_PFD0              6
+#define IMX95_CLK_SYSPLL1_PFD0_DIV2         7
+#define IMX95_CLK_SYSPLL1_PFD1_UNGATED      8
+#define IMX95_CLK_SYSPLL1_PFD1              9
+#define IMX95_CLK_SYSPLL1_PFD1_DIV2         10
+#define IMX95_CLK_SYSPLL1_PFD2_UNGATED      11
+#define IMX95_CLK_SYSPLL1_PFD2              12
+#define IMX95_CLK_SYSPLL1_PFD2_DIV2         13
+#define IMX95_CLK_AUDIOPLL1_VCO             14
+#define IMX95_CLK_AUDIOPLL1                 15
+#define IMX95_CLK_AUDIOPLL2_VCO             16
+#define IMX95_CLK_AUDIOPLL2                 17
+#define IMX95_CLK_VIDEOPLL1_VCO             18
+#define IMX95_CLK_VIDEOPLL1                 19
+#define IMX95_CLK_RESERVED20                20
+#define IMX95_CLK_RESERVED21                21
+#define IMX95_CLK_RESERVED22                22
+#define IMX95_CLK_RESERVED23                23
+#define IMX95_CLK_ARMPLL_VCO                24
+#define IMX95_CLK_ARMPLL_PFD0_UNGATED       25
+#define IMX95_CLK_ARMPLL_PFD0               26
+#define IMX95_CLK_ARMPLL_PFD1_UNGATED       27
+#define IMX95_CLK_ARMPLL_PFD1               28
+#define IMX95_CLK_ARMPLL_PFD2_UNGATED       29
+#define IMX95_CLK_ARMPLL_PFD2               30
+#define IMX95_CLK_ARMPLL_PFD3_UNGATED       31
+#define IMX95_CLK_ARMPLL_PFD3               32
+#define IMX95_CLK_DRAMPLL_VCO               33
+#define IMX95_CLK_DRAMPLL                   34
+#define IMX95_CLK_HSIOPLL_VCO               35
+#define IMX95_CLK_HSIOPLL                   36
+#define IMX95_CLK_LDBPLL_VCO                37
+#define IMX95_CLK_LDBPLL                    38
+#define IMX95_CLK_EXT1                      39
+#define IMX95_CLK_EXT2                      40
+
+#define IMX95_CCM_NUM_CLK_SRC               41
+
+#define IMX95_CLK_ADC                      (IMX95_CCM_NUM_CLK_SRC + 0)
+#define IMX95_CLK_TMU                      (IMX95_CCM_NUM_CLK_SRC + 1)
+#define IMX95_CLK_BUSAON                   (IMX95_CCM_NUM_CLK_SRC + 2)
+#define IMX95_CLK_CAN1                     (IMX95_CCM_NUM_CLK_SRC + 3)
+#define IMX95_CLK_I3C1                     (IMX95_CCM_NUM_CLK_SRC + 4)
+#define IMX95_CLK_I3C1SLOW                 (IMX95_CCM_NUM_CLK_SRC + 5)
+#define IMX95_CLK_LPI2C1                   (IMX95_CCM_NUM_CLK_SRC + 6)
+#define IMX95_CLK_LPI2C2                   (IMX95_CCM_NUM_CLK_SRC + 7)
+#define IMX95_CLK_LPSPI1                   (IMX95_CCM_NUM_CLK_SRC + 8)
+#define IMX95_CLK_LPSPI2                   (IMX95_CCM_NUM_CLK_SRC + 9)
+#define IMX95_CLK_LPTMR1                   (IMX95_CCM_NUM_CLK_SRC + 10)
+#define IMX95_CLK_LPUART1                  (IMX95_CCM_NUM_CLK_SRC + 11)
+#define IMX95_CLK_LPUART2                  (IMX95_CCM_NUM_CLK_SRC + 12)
+#define IMX95_CLK_M33                      (IMX95_CCM_NUM_CLK_SRC + 13)
+#define IMX95_CLK_M33SYSTICK               (IMX95_CCM_NUM_CLK_SRC + 14)
+#define IMX95_CLK_MQS1                     (IMX95_CCM_NUM_CLK_SRC + 15)
+#define IMX95_CLK_PDM                      (IMX95_CCM_NUM_CLK_SRC + 16)
+#define IMX95_CLK_SAI1                     (IMX95_CCM_NUM_CLK_SRC + 17)
+#define IMX95_CLK_SENTINEL                 (IMX95_CCM_NUM_CLK_SRC + 18)
+#define IMX95_CLK_TPM2                     (IMX95_CCM_NUM_CLK_SRC + 19)
+#define IMX95_CLK_TSTMR1                   (IMX95_CCM_NUM_CLK_SRC + 20)
+#define IMX95_CLK_CAMAPB                   (IMX95_CCM_NUM_CLK_SRC + 21)
+#define IMX95_CLK_CAMAXI                   (IMX95_CCM_NUM_CLK_SRC + 22)
+#define IMX95_CLK_CAMCM0                   (IMX95_CCM_NUM_CLK_SRC + 23)
+#define IMX95_CLK_CAMISI                   (IMX95_CCM_NUM_CLK_SRC + 24)
+#define IMX95_CLK_MIPIPHYCFG               (IMX95_CCM_NUM_CLK_SRC + 25)
+#define IMX95_CLK_MIPIPHYPLLBYPASS         (IMX95_CCM_NUM_CLK_SRC + 26)
+#define IMX95_CLK_MIPIPHYPLLREF            (IMX95_CCM_NUM_CLK_SRC + 27)
+#define IMX95_CLK_MIPITESTBYTE             (IMX95_CCM_NUM_CLK_SRC + 28)
+#define IMX95_CLK_A55                      (IMX95_CCM_NUM_CLK_SRC + 29)
+#define IMX95_CLK_A55MTRBUS                (IMX95_CCM_NUM_CLK_SRC + 30)
+#define IMX95_CLK_A55PERIPH                (IMX95_CCM_NUM_CLK_SRC + 31)
+#define IMX95_CLK_DRAMALT                  (IMX95_CCM_NUM_CLK_SRC + 32)
+#define IMX95_CLK_DRAMAPB                  (IMX95_CCM_NUM_CLK_SRC + 33)
+#define IMX95_CLK_DISPAPB                  (IMX95_CCM_NUM_CLK_SRC + 34)
+#define IMX95_CLK_DISPAXI                  (IMX95_CCM_NUM_CLK_SRC + 35)
+#define IMX95_CLK_DISPDP                   (IMX95_CCM_NUM_CLK_SRC + 36)
+#define IMX95_CLK_DISPOCRAM                (IMX95_CCM_NUM_CLK_SRC + 37)
+#define IMX95_CLK_DISPUSB31                (IMX95_CCM_NUM_CLK_SRC + 38)
+#define IMX95_CLK_DISP1PIX                 (IMX95_CCM_NUM_CLK_SRC + 39)
+#define IMX95_CLK_DISP2PIX                 (IMX95_CCM_NUM_CLK_SRC + 40)
+#define IMX95_CLK_DISP3PIX                 (IMX95_CCM_NUM_CLK_SRC + 41)
+#define IMX95_CLK_GPUAPB                   (IMX95_CCM_NUM_CLK_SRC + 42)
+#define IMX95_CLK_GPU                      (IMX95_CCM_NUM_CLK_SRC + 43)
+#define IMX95_CLK_HSIOACSCAN480M           (IMX95_CCM_NUM_CLK_SRC + 44)
+#define IMX95_CLK_HSIOACSCAN80M            (IMX95_CCM_NUM_CLK_SRC + 45)
+#define IMX95_CLK_HSIO                     (IMX95_CCM_NUM_CLK_SRC + 46)
+#define IMX95_CLK_HSIOPCIEAUX              (IMX95_CCM_NUM_CLK_SRC + 47)
+#define IMX95_CLK_HSIOPCIETEST160M         (IMX95_CCM_NUM_CLK_SRC + 48)
+#define IMX95_CLK_HSIOPCIETEST400M         (IMX95_CCM_NUM_CLK_SRC + 49)
+#define IMX95_CLK_HSIOPCIETEST500M         (IMX95_CCM_NUM_CLK_SRC + 50)
+#define IMX95_CLK_HSIOUSBTEST50M           (IMX95_CCM_NUM_CLK_SRC + 51)
+#define IMX95_CLK_HSIOUSBTEST60M           (IMX95_CCM_NUM_CLK_SRC + 52)
+#define IMX95_CLK_BUSM7                    (IMX95_CCM_NUM_CLK_SRC + 53)
+#define IMX95_CLK_M7                       (IMX95_CCM_NUM_CLK_SRC + 54)
+#define IMX95_CLK_M7SYSTICK                (IMX95_CCM_NUM_CLK_SRC + 55)
+#define IMX95_CLK_BUSNETCMIX               (IMX95_CCM_NUM_CLK_SRC + 56)
+#define IMX95_CLK_ENET                     (IMX95_CCM_NUM_CLK_SRC + 57)
+#define IMX95_CLK_ENETPHYTEST200M          (IMX95_CCM_NUM_CLK_SRC + 58)
+#define IMX95_CLK_ENETPHYTEST500M          (IMX95_CCM_NUM_CLK_SRC + 59)
+#define IMX95_CLK_ENETPHYTEST667M          (IMX95_CCM_NUM_CLK_SRC + 60)
+#define IMX95_CLK_ENETREF                  (IMX95_CCM_NUM_CLK_SRC + 61)
+#define IMX95_CLK_ENETTIMER1               (IMX95_CCM_NUM_CLK_SRC + 62)
+#define IMX95_CLK_MQS2                     (IMX95_CCM_NUM_CLK_SRC + 63)
+#define IMX95_CLK_SAI2                     (IMX95_CCM_NUM_CLK_SRC + 64)
+#define IMX95_CLK_NOCAPB                   (IMX95_CCM_NUM_CLK_SRC + 65)
+#define IMX95_CLK_NOC                      (IMX95_CCM_NUM_CLK_SRC + 66)
+#define IMX95_CLK_NPUAPB                   (IMX95_CCM_NUM_CLK_SRC + 67)
+#define IMX95_CLK_NPU                      (IMX95_CCM_NUM_CLK_SRC + 68)
+#define IMX95_CLK_CCMCKO1                  (IMX95_CCM_NUM_CLK_SRC + 69)
+#define IMX95_CLK_CCMCKO2                  (IMX95_CCM_NUM_CLK_SRC + 70)
+#define IMX95_CLK_CCMCKO3                  (IMX95_CCM_NUM_CLK_SRC + 71)
+#define IMX95_CLK_CCMCKO4                  (IMX95_CCM_NUM_CLK_SRC + 72)
+#define IMX95_CLK_VPUAPB                   (IMX95_CCM_NUM_CLK_SRC + 73)
+#define IMX95_CLK_VPU                      (IMX95_CCM_NUM_CLK_SRC + 74)
+#define IMX95_CLK_VPUDSP                   (IMX95_CCM_NUM_CLK_SRC + 75)
+#define IMX95_CLK_VPUJPEG                  (IMX95_CCM_NUM_CLK_SRC + 76)
+#define IMX95_CLK_AUDIOXCVR                (IMX95_CCM_NUM_CLK_SRC + 77)
+#define IMX95_CLK_BUSWAKEUP                (IMX95_CCM_NUM_CLK_SRC + 78)
+#define IMX95_CLK_CAN2                     (IMX95_CCM_NUM_CLK_SRC + 79)
+#define IMX95_CLK_CAN3                     (IMX95_CCM_NUM_CLK_SRC + 80)
+#define IMX95_CLK_CAN4                     (IMX95_CCM_NUM_CLK_SRC + 81)
+#define IMX95_CLK_CAN5                     (IMX95_CCM_NUM_CLK_SRC + 82)
+#define IMX95_CLK_FLEXIO1                  (IMX95_CCM_NUM_CLK_SRC + 83)
+#define IMX95_CLK_FLEXIO2                  (IMX95_CCM_NUM_CLK_SRC + 84)
+#define IMX95_CLK_FLEXSPI1                 (IMX95_CCM_NUM_CLK_SRC + 85)
+#define IMX95_CLK_I3C2                     (IMX95_CCM_NUM_CLK_SRC + 86)
+#define IMX95_CLK_I3C2SLOW                 (IMX95_CCM_NUM_CLK_SRC + 87)
+#define IMX95_CLK_LPI2C3                   (IMX95_CCM_NUM_CLK_SRC + 88)
+#define IMX95_CLK_LPI2C4                   (IMX95_CCM_NUM_CLK_SRC + 89)
+#define IMX95_CLK_LPI2C5                   (IMX95_CCM_NUM_CLK_SRC + 90)
+#define IMX95_CLK_LPI2C6                   (IMX95_CCM_NUM_CLK_SRC + 91)
+#define IMX95_CLK_LPI2C7                   (IMX95_CCM_NUM_CLK_SRC + 92)
+#define IMX95_CLK_LPI2C8                   (IMX95_CCM_NUM_CLK_SRC + 93)
+#define IMX95_CLK_LPSPI3                   (IMX95_CCM_NUM_CLK_SRC + 94)
+#define IMX95_CLK_LPSPI4                   (IMX95_CCM_NUM_CLK_SRC + 95)
+#define IMX95_CLK_LPSPI5                   (IMX95_CCM_NUM_CLK_SRC + 96)
+#define IMX95_CLK_LPSPI6                   (IMX95_CCM_NUM_CLK_SRC + 97)
+#define IMX95_CLK_LPSPI7                   (IMX95_CCM_NUM_CLK_SRC + 98)
+#define IMX95_CLK_LPSPI8                   (IMX95_CCM_NUM_CLK_SRC + 99)
+#define IMX95_CLK_LPTMR2                   (IMX95_CCM_NUM_CLK_SRC + 100)
+#define IMX95_CLK_LPUART3                  (IMX95_CCM_NUM_CLK_SRC + 101)
+#define IMX95_CLK_LPUART4                  (IMX95_CCM_NUM_CLK_SRC + 102)
+#define IMX95_CLK_LPUART5                  (IMX95_CCM_NUM_CLK_SRC + 103)
+#define IMX95_CLK_LPUART6                  (IMX95_CCM_NUM_CLK_SRC + 104)
+#define IMX95_CLK_LPUART7                  (IMX95_CCM_NUM_CLK_SRC + 105)
+#define IMX95_CLK_LPUART8                  (IMX95_CCM_NUM_CLK_SRC + 106)
+#define IMX95_CLK_SAI3                     (IMX95_CCM_NUM_CLK_SRC + 107)
+#define IMX95_CLK_SAI4                     (IMX95_CCM_NUM_CLK_SRC + 108)
+#define IMX95_CLK_SAI5                     (IMX95_CCM_NUM_CLK_SRC + 109)
+#define IMX95_CLK_SPDIF                    (IMX95_CCM_NUM_CLK_SRC + 110)
+#define IMX95_CLK_SWOTRACE                 (IMX95_CCM_NUM_CLK_SRC + 111)
+#define IMX95_CLK_TPM4                     (IMX95_CCM_NUM_CLK_SRC + 112)
+#define IMX95_CLK_TPM5                     (IMX95_CCM_NUM_CLK_SRC + 113)
+#define IMX95_CLK_TPM6                     (IMX95_CCM_NUM_CLK_SRC + 114)
+#define IMX95_CLK_TSTMR2                   (IMX95_CCM_NUM_CLK_SRC + 115)
+#define IMX95_CLK_USBPHYBURUNIN            (IMX95_CCM_NUM_CLK_SRC + 116)
+#define IMX95_CLK_USDHC1                   (IMX95_CCM_NUM_CLK_SRC + 117)
+#define IMX95_CLK_USDHC2                   (IMX95_CCM_NUM_CLK_SRC + 118)
+#define IMX95_CLK_USDHC3                   (IMX95_CCM_NUM_CLK_SRC + 119)
+#define IMX95_CLK_V2XPK                    (IMX95_CCM_NUM_CLK_SRC + 120)
+#define IMX95_CLK_WAKEUPAXI                (IMX95_CCM_NUM_CLK_SRC + 121)
+#define IMX95_CLK_XSPISLVROOT              (IMX95_CCM_NUM_CLK_SRC + 122)
+#define IMX95_CLK_SEL_EXT                  (IMX95_CCM_NUM_CLK_SRC + 123 + 0)
+#define IMX95_CLK_SEL_A55C0                (IMX95_CCM_NUM_CLK_SRC + 123 + 1)
+#define IMX95_CLK_SEL_A55C1                (IMX95_CCM_NUM_CLK_SRC + 123 + 2)
+#define IMX95_CLK_SEL_A55C2                (IMX95_CCM_NUM_CLK_SRC + 123 + 3)
+#define IMX95_CLK_SEL_A55C3                (IMX95_CCM_NUM_CLK_SRC + 123 + 4)
+#define IMX95_CLK_SEL_A55C4                (IMX95_CCM_NUM_CLK_SRC + 123 + 5)
+#define IMX95_CLK_SEL_A55C5                (IMX95_CCM_NUM_CLK_SRC + 123 + 6)
+#define IMX95_CLK_SEL_A55P                 (IMX95_CCM_NUM_CLK_SRC + 123 + 7)
+#define IMX95_CLK_SEL_DRAM                 (IMX95_CCM_NUM_CLK_SRC + 123 + 8)
+#define IMX95_CLK_SEL_TEMPSENSE            (IMX95_CCM_NUM_CLK_SRC + 123 + 9)
+
+#endif	/* __CLOCK_IMX95_H */
diff --git a/dts/upstream/src/arm64/freescale/imx95-pinfunc.h b/dts/upstream/src/arm64/freescale/imx95-pinfunc.h
new file mode 100644
index 00000000000..9f614eea7c8
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx95-pinfunc.h
@@ -0,0 +1,865 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright 2024 NXP
+ */
+
+#ifndef __DTS_IMX95_PINFUNC_H
+#define __DTS_IMX95_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define IMX95_PAD_DAP_TDI__JTAG_MUX_TDI                               0x0000 0x0204 0x0610 0x00 0x00
+#define IMX95_PAD_DAP_TDI__NETCMIX_TOP_MQS2_LEFT                      0x0000 0x0204 0x0000 0x01 0x00
+#define IMX95_PAD_DAP_TDI__NETCMIX_TOP_NETC_TMR_1588_ALARM1           0x0000 0x0204 0x0000 0x02 0x00
+#define IMX95_PAD_DAP_TDI__CAN2_TX                                    0x0000 0x0204 0x0000 0x03 0x00
+#define IMX95_PAD_DAP_TDI__FLEXIO2_FLEXIO_BIT30                       0x0000 0x0204 0x0000 0x04 0x00
+#define IMX95_PAD_DAP_TDI__GPIO3_IO_BIT28                             0x0000 0x0204 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TDI__LPUART5_RX                                 0x0000 0x0204 0x0570 0x06 0x00
+
+#define IMX95_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS                         0x0004 0x0208 0x0614 0x00 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__CAN4_TX                              0x0004 0x0208 0x0000 0x02 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO_BIT31                 0x0004 0x0208 0x0000 0x04 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__GPIO3_IO_BIT29                       0x0004 0x0208 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                        0x0004 0x0208 0x0000 0x06 0x00
+
+#define IMX95_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK                        0x0008 0x020C 0x060C 0x00 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__CAN4_RX                             0x0008 0x020C 0x044C 0x02 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO_BIT30                0x0008 0x020C 0x0460 0x04 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__GPIO3_IO_BIT30                      0x0008 0x020C 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                       0x0008 0x020C 0x056C 0x06 0x00
+
+#define IMX95_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO                      0x000C 0x0210 0x0000 0x00 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__NETCMIX_TOP_MQS2_RIGHT            0x000C 0x0210 0x0000 0x01 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__NETCMIX_TOP_NETC_TMR_1588_ALARM   0x000C 0x0210 0x0000 0x02 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__CAN2_RX                           0x000C 0x0210 0x0444 0x03 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO_BIT31              0x000C 0x0210 0x0464 0x04 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__GPIO3_IO_BIT31                    0x000C 0x0210 0x0000 0x05 0x00
+#define IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX                        0x000C 0x0210 0x0574 0x06 0x00
+
+#define IMX95_PAD_GPIO_IO00__GPIO2_IO_BIT0                            0x0010 0x0214 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO00__LPI2C3_SDA                               0x0010 0x0214 0x0504 0x11 0x00
+#define IMX95_PAD_GPIO_IO00__LPSPI6_PCS0                              0x0010 0x0214 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO00__LPUART5_TX                               0x0010 0x0214 0x0574 0x05 0x01
+#define IMX95_PAD_GPIO_IO00__LPI2C5_SDA                               0x0010 0x0214 0x0514 0x16 0x00
+#define IMX95_PAD_GPIO_IO00__FLEXIO1_FLEXIO_BIT0                      0x0010 0x0214 0x0468 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO01__GPIO2_IO_BIT1                            0x0014 0x0218 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO01__LPI2C3_SCL                               0x0014 0x0218 0x0500 0x11 0x00
+#define IMX95_PAD_GPIO_IO01__LPSPI6_SIN                               0x0014 0x0218 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO01__LPUART5_RX                               0x0014 0x0218 0x0570 0x05 0x01
+#define IMX95_PAD_GPIO_IO01__LPI2C5_SCL                               0x0014 0x0218 0x0510 0x16 0x00
+#define IMX95_PAD_GPIO_IO01__FLEXIO1_FLEXIO_BIT1                      0x0014 0x0218 0x046C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO02__GPIO2_IO_BIT2                            0x0018 0x021C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO02__LPI2C4_SDA                               0x0018 0x021C 0x050C 0x11 0x00
+#define IMX95_PAD_GPIO_IO02__LPSPI6_SOUT                              0x0018 0x021C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO02__LPUART5_CTS_B                            0x0018 0x021C 0x056C 0x05 0x01
+#define IMX95_PAD_GPIO_IO02__LPI2C6_SDA                               0x0018 0x021C 0x051C 0x16 0x00
+#define IMX95_PAD_GPIO_IO02__FLEXIO1_FLEXIO_BIT2                      0x0018 0x021C 0x0470 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO03__GPIO2_IO_BIT3                            0x001C 0x0220 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO03__LPI2C4_SCL                               0x001C 0x0220 0x0508 0x11 0x00
+#define IMX95_PAD_GPIO_IO03__LPSPI6_SCK                               0x001C 0x0220 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO03__LPUART5_RTS_B                            0x001C 0x0220 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO03__LPI2C6_SCL                               0x001C 0x0220 0x0518 0x16 0x00
+#define IMX95_PAD_GPIO_IO03__FLEXIO1_FLEXIO_BIT3                      0x001C 0x0220 0x0474 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4                            0x0020 0x0224 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO04__TPM3_CH0                                 0x0020 0x0224 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO04__AONMIX_TOP_PDM_CLK                       0x0020 0x0224 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO04__CAN4_TX                                  0x0020 0x0224 0x0000 0x03 0x00
+#define IMX95_PAD_GPIO_IO04__LPSPI7_PCS0                              0x0020 0x0224 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO04__LPUART6_TX                               0x0020 0x0224 0x0580 0x05 0x01
+#define IMX95_PAD_GPIO_IO04__LPI2C6_SDA                               0x0020 0x0224 0x051C 0x16 0x01
+#define IMX95_PAD_GPIO_IO04__FLEXIO1_FLEXIO_BIT4                      0x0020 0x0224 0x0478 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO05__GPIO2_IO_BIT5                            0x0024 0x0228 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO05__TPM4_CH0                                 0x0024 0x0228 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO05__AONMIX_TOP_PDM_BIT_STREAM_BIT0           0x0024 0x0228 0x040C 0x02 0x01
+#define IMX95_PAD_GPIO_IO05__CAN4_RX                                  0x0024 0x0228 0x044C 0x03 0x01
+#define IMX95_PAD_GPIO_IO05__LPSPI7_SIN                               0x0024 0x0228 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO05__LPUART6_RX                               0x0024 0x0228 0x057C 0x05 0x01
+#define IMX95_PAD_GPIO_IO05__LPI2C6_SCL                               0x0024 0x0228 0x0518 0x16 0x01
+#define IMX95_PAD_GPIO_IO05__FLEXIO1_FLEXIO_BIT5                      0x0024 0x0228 0x047C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO06__GPIO2_IO_BIT6                            0x0028 0x022C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO06__TPM5_CH0                                 0x0028 0x022C 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO06__AONMIX_TOP_PDM_BIT_STREAM_BIT1           0x0028 0x022C 0x0410 0x02 0x01
+#define IMX95_PAD_GPIO_IO06__LPSPI7_SOUT                              0x0028 0x022C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO06__LPUART6_CTS_B                            0x0028 0x022C 0x0578 0x05 0x01
+#define IMX95_PAD_GPIO_IO06__LPI2C7_SDA                               0x0028 0x022C 0x0524 0x16 0x00
+#define IMX95_PAD_GPIO_IO06__FLEXIO1_FLEXIO_BIT6                      0x0028 0x022C 0x0480 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO07__GPIO2_IO_BIT7                            0x002C 0x0230 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO07__LPSPI3_PCS1                              0x002C 0x0230 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO07__LPSPI7_SCK                               0x002C 0x0230 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO07__LPUART6_RTS_B                            0x002C 0x0230 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO07__LPI2C7_SCL                               0x002C 0x0230 0x0520 0x16 0x00
+#define IMX95_PAD_GPIO_IO07__FLEXIO1_FLEXIO_BIT7                      0x002C 0x0230 0x0484 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO08__GPIO2_IO_BIT8                            0x0030 0x0234 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO08__LPSPI3_PCS0                              0x0030 0x0234 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO08__TPM6_CH0                                 0x0030 0x0234 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO08__LPUART7_TX                               0x0030 0x0234 0x0588 0x05 0x01
+#define IMX95_PAD_GPIO_IO08__LPI2C7_SDA                               0x0030 0x0234 0x0524 0x16 0x01
+#define IMX95_PAD_GPIO_IO08__FLEXIO1_FLEXIO_BIT8                      0x0030 0x0234 0x0488 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO09__GPIO2_IO_BIT9                            0x0034 0x0238 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO09__LPSPI3_SIN                               0x0034 0x0238 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO09__TPM3_EXTCLK                              0x0034 0x0238 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO09__LPUART7_RX                               0x0034 0x0238 0x0584 0x05 0x01
+#define IMX95_PAD_GPIO_IO09__LPI2C7_SCL                               0x0034 0x0238 0x0520 0x16 0x01
+#define IMX95_PAD_GPIO_IO09__FLEXIO1_FLEXIO_BIT9                      0x0034 0x0238 0x048C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO10__GPIO2_IO_BIT10                           0x0038 0x023C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO10__LPSPI3_SOUT                              0x0038 0x023C 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO10__TPM4_EXTCLK                              0x0038 0x023C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO10__LPUART7_CTS_B                            0x0038 0x023C 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO10__LPI2C8_SDA                               0x0038 0x023C 0x052C 0x16 0x00
+#define IMX95_PAD_GPIO_IO10__FLEXIO1_FLEXIO_BIT10                     0x0038 0x023C 0x0490 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11                           0x003C 0x0240 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO11__LPSPI3_SCK                               0x003C 0x0240 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO11__TPM5_EXTCLK                              0x003C 0x0240 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO11__LPUART7_RTS_B                            0x003C 0x0240 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO11__LPI2C8_SCL                               0x003C 0x0240 0x0528 0x16 0x00
+#define IMX95_PAD_GPIO_IO11__FLEXIO1_FLEXIO_BIT11                     0x003C 0x0240 0x0494 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO12__GPIO2_IO_BIT12                           0x0040 0x0244 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO12__TPM3_CH2                                 0x0040 0x0244 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO12__AONMIX_TOP_PDM_BIT_STREAM_BIT2           0x0040 0x0244 0x0414 0x02 0x00
+#define IMX95_PAD_GPIO_IO12__FLEXIO1_FLEXIO_BIT12                     0x0040 0x0244 0x0498 0x03 0x00
+#define IMX95_PAD_GPIO_IO12__LPSPI8_PCS0                              0x0040 0x0244 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO12__LPUART8_TX                               0x0040 0x0244 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO12__LPI2C8_SDA                               0x0040 0x0244 0x052C 0x16 0x01
+#define IMX95_PAD_GPIO_IO12__SAI3_RX_SYNC                             0x0040 0x0244 0x0590 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO13__GPIO2_IO_BIT13                           0x0044 0x0248 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO13__TPM4_CH2                                 0x0044 0x0248 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO13__AONMIX_TOP_PDM_BIT_STREAM_BIT3           0x0044 0x0248 0x0418 0x02 0x00
+#define IMX95_PAD_GPIO_IO13__LPSPI8_SIN                               0x0044 0x0248 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO13__LPUART8_RX                               0x0044 0x0248 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO13__LPI2C8_SCL                               0x0044 0x0248 0x0528 0x16 0x01
+#define IMX95_PAD_GPIO_IO13__FLEXIO1_FLEXIO_BIT13                     0x0044 0x0248 0x049C 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO14__GPIO2_IO_BIT14                           0x0048 0x024C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO14__LPUART3_TX                               0x0048 0x024C 0x055C 0x01 0x01
+#define IMX95_PAD_GPIO_IO14__LPSPI8_SOUT                              0x0048 0x024C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO14__LPUART8_CTS_B                            0x0048 0x024C 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO14__LPUART4_TX                               0x0048 0x024C 0x0568 0x06 0x01
+#define IMX95_PAD_GPIO_IO14__FLEXIO1_FLEXIO_BIT14                     0x0048 0x024C 0x04A0 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO15__GPIO2_IO_BIT15                           0x004C 0x0250 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO15__LPUART3_RX                               0x004C 0x0250 0x0558 0x01 0x01
+#define IMX95_PAD_GPIO_IO15__LPSPI8_SCK                               0x004C 0x0250 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO15__LPUART8_RTS_B                            0x004C 0x0250 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO15__LPUART4_RX                               0x004C 0x0250 0x0564 0x06 0x01
+#define IMX95_PAD_GPIO_IO15__FLEXIO1_FLEXIO_BIT15                     0x004C 0x0250 0x04A4 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO16__GPIO2_IO_BIT16                           0x0050 0x0254 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK                             0x0050 0x0254 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO16__AONMIX_TOP_PDM_BIT_STREAM_BIT2           0x0050 0x0254 0x0414 0x02 0x01
+#define IMX95_PAD_GPIO_IO16__LPUART3_CTS_B                            0x0050 0x0254 0x0554 0x04 0x01
+#define IMX95_PAD_GPIO_IO16__LPSPI4_PCS2                              0x0050 0x0254 0x0538 0x05 0x01
+#define IMX95_PAD_GPIO_IO16__LPUART4_CTS_B                            0x0050 0x0254 0x0560 0x06 0x01
+#define IMX95_PAD_GPIO_IO16__FLEXIO1_FLEXIO_BIT16                     0x0050 0x0254 0x04A8 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO17__GPIO2_IO_BIT17                           0x0054 0x0258 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO17__SAI3_MCLK                                0x0054 0x0258 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO17__LPUART3_RTS_B                            0x0054 0x0258 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO17__LPSPI4_PCS1                              0x0054 0x0258 0x0534 0x05 0x01
+#define IMX95_PAD_GPIO_IO17__LPUART4_RTS_B                            0x0054 0x0258 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO17__FLEXIO1_FLEXIO_BIT17                     0x0054 0x0258 0x04AC 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18                           0x0058 0x025C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO18__SAI3_RX_BCLK                             0x0058 0x025C 0x058C 0x01 0x00
+#define IMX95_PAD_GPIO_IO18__LPSPI5_PCS0                              0x0058 0x025C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO18__LPSPI4_PCS0                              0x0058 0x025C 0x0530 0x05 0x01
+#define IMX95_PAD_GPIO_IO18__TPM5_CH2                                 0x0058 0x025C 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO18__FLEXIO1_FLEXIO_BIT18                     0x0058 0x025C 0x04B0 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO19__GPIO2_IO_BIT19                           0x005C 0x0260 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO19__SAI3_RX_SYNC                             0x005C 0x0260 0x0590 0x01 0x01
+#define IMX95_PAD_GPIO_IO19__AONMIX_TOP_PDM_BIT_STREAM_BIT3           0x005C 0x0260 0x0418 0x02 0x01
+#define IMX95_PAD_GPIO_IO19__FLEXIO1_FLEXIO_BIT19                     0x005C 0x0260 0x04B4 0x03 0x00
+#define IMX95_PAD_GPIO_IO19__LPSPI5_SIN                               0x005C 0x0260 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO19__LPSPI4_SIN                               0x005C 0x0260 0x0540 0x05 0x01
+#define IMX95_PAD_GPIO_IO19__TPM6_CH2                                 0x005C 0x0260 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO19__SAI3_TX_DATA_BIT0                        0x005C 0x0260 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO20__GPIO2_IO_BIT20                           0x0060 0x0264 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0                        0x0060 0x0264 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO20__AONMIX_TOP_PDM_BIT_STREAM_BIT0           0x0060 0x0264 0x040C 0x02 0x02
+#define IMX95_PAD_GPIO_IO20__LPSPI5_SOUT                              0x0060 0x0264 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO20__LPSPI4_SOUT                              0x0060 0x0264 0x0544 0x05 0x01
+#define IMX95_PAD_GPIO_IO20__TPM3_CH1                                 0x0060 0x0264 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO20__FLEXIO1_FLEXIO_BIT20                     0x0060 0x0264 0x04B8 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO21__GPIO2_IO_BIT21                           0x0064 0x0268 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0                        0x0064 0x0268 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO21__AONMIX_TOP_PDM_CLK                       0x0064 0x0268 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO21__FLEXIO1_FLEXIO_BIT21                     0x0064 0x0268 0x04BC 0x03 0x00
+#define IMX95_PAD_GPIO_IO21__LPSPI5_SCK                               0x0064 0x0268 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO21__LPSPI4_SCK                               0x0064 0x0268 0x053C 0x05 0x01
+#define IMX95_PAD_GPIO_IO21__TPM4_CH1                                 0x0064 0x0268 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO21__SAI3_RX_BCLK                             0x0064 0x0268 0x058C 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22                           0x0068 0x026C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO22__USDHC3_CLK                               0x0068 0x026C 0x05C8 0x01 0x00
+#define IMX95_PAD_GPIO_IO22__SPDIF_IN                                 0x0068 0x026C 0x0454 0x02 0x02
+#define IMX95_PAD_GPIO_IO22__CAN5_TX                                  0x0068 0x026C 0x0000 0x03 0x00
+#define IMX95_PAD_GPIO_IO22__TPM5_CH1                                 0x0068 0x026C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO22__TPM6_EXTCLK                              0x0068 0x026C 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO22__LPI2C5_SDA                               0x0068 0x026C 0x0514 0x16 0x01
+#define IMX95_PAD_GPIO_IO22__FLEXIO1_FLEXIO_BIT22                     0x0068 0x026C 0x04C0 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23                           0x006C 0x0270 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO23__USDHC3_CMD                               0x006C 0x0270 0x05CC 0x01 0x00
+#define IMX95_PAD_GPIO_IO23__SPDIF_OUT                                0x006C 0x0270 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO23__CAN5_RX                                  0x006C 0x0270 0x0450 0x03 0x00
+#define IMX95_PAD_GPIO_IO23__TPM6_CH1                                 0x006C 0x0270 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO23__LPI2C5_SCL                               0x006C 0x0270 0x0510 0x16 0x01
+#define IMX95_PAD_GPIO_IO23__FLEXIO1_FLEXIO_BIT23                     0x006C 0x0270 0x04C4 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24                           0x0070 0x0274 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO24__USDHC3_DATA0                             0x0070 0x0274 0x05D0 0x01 0x00
+#define IMX95_PAD_GPIO_IO24__TPM3_CH3                                 0x0070 0x0274 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO24__JTAG_MUX_TDO                             0x0070 0x0274 0x0000 0x05 0x00
+#define IMX95_PAD_GPIO_IO24__LPSPI6_PCS1                              0x0070 0x0274 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO24__FLEXIO1_FLEXIO_BIT24                     0x0070 0x0274 0x04C8 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO25__GPIO2_IO_BIT25                           0x0074 0x0278 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO25__USDHC3_DATA1                             0x0074 0x0278 0x05D4 0x01 0x00
+#define IMX95_PAD_GPIO_IO25__CAN2_TX                                  0x0074 0x0278 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO25__TPM4_CH3                                 0x0074 0x0278 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO25__JTAG_MUX_TCK                             0x0074 0x0278 0x060C 0x05 0x01
+#define IMX95_PAD_GPIO_IO25__LPSPI7_PCS1                              0x0074 0x0278 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO25__FLEXIO1_FLEXIO_BIT25                     0x0074 0x0278 0x04CC 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO26__GPIO2_IO_BIT26                           0x0078 0x027C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO26__USDHC3_DATA2                             0x0078 0x027C 0x05D8 0x01 0x00
+#define IMX95_PAD_GPIO_IO26__AONMIX_TOP_PDM_BIT_STREAM_BIT1           0x0078 0x027C 0x0410 0x02 0x02
+#define IMX95_PAD_GPIO_IO26__FLEXIO1_FLEXIO_BIT26                     0x0078 0x027C 0x0458 0x03 0x01
+#define IMX95_PAD_GPIO_IO26__TPM5_CH3                                 0x0078 0x027C 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO26__JTAG_MUX_TDI                             0x0078 0x027C 0x0610 0x05 0x01
+#define IMX95_PAD_GPIO_IO26__LPSPI8_PCS1                              0x0078 0x027C 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC                             0x0078 0x027C 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO27__GPIO2_IO_BIT27                           0x007C 0x0280 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO27__USDHC3_DATA3                             0x007C 0x0280 0x05DC 0x01 0x00
+#define IMX95_PAD_GPIO_IO27__CAN2_RX                                  0x007C 0x0280 0x0444 0x02 0x02
+#define IMX95_PAD_GPIO_IO27__TPM6_CH3                                 0x007C 0x0280 0x0000 0x04 0x00
+#define IMX95_PAD_GPIO_IO27__JTAG_MUX_TMS                             0x007C 0x0280 0x0614 0x05 0x01
+#define IMX95_PAD_GPIO_IO27__LPSPI5_PCS1                              0x007C 0x0280 0x0000 0x06 0x00
+#define IMX95_PAD_GPIO_IO27__FLEXIO1_FLEXIO_BIT27                     0x007C 0x0280 0x045C 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28                           0x0080 0x0284 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO28__LPI2C3_SDA                               0x0080 0x0284 0x0504 0x11 0x01
+#define IMX95_PAD_GPIO_IO28__CAN3_TX                                  0x0080 0x0284 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO28__FLEXIO1_FLEXIO_BIT28                     0x0080 0x0284 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29                           0x0084 0x0288 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO29__LPI2C3_SCL                               0x0084 0x0288 0x0500 0x11 0x01
+#define IMX95_PAD_GPIO_IO29__CAN3_RX                                  0x0084 0x0288 0x0448 0x02 0x01
+#define IMX95_PAD_GPIO_IO29__FLEXIO1_FLEXIO_BIT29                     0x0084 0x0288 0x0000 0x07 0x00
+
+#define IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30                           0x0088 0x028C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO30__LPI2C4_SDA                               0x0088 0x028C 0x050C 0x11 0x01
+#define IMX95_PAD_GPIO_IO30__CAN5_TX                                  0x0088 0x028C 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO30__FLEXIO1_FLEXIO_BIT30                     0x0088 0x028C 0x0460 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31                           0x008C 0x0290 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO31__LPI2C4_SCL                               0x008C 0x0290 0x0508 0x11 0x01
+#define IMX95_PAD_GPIO_IO31__CAN5_RX                                  0x008C 0x0290 0x0450 0x02 0x01
+#define IMX95_PAD_GPIO_IO31__FLEXIO1_FLEXIO_BIT31                     0x008C 0x0290 0x0464 0x07 0x01
+
+#define IMX95_PAD_GPIO_IO32__GPIO5_IO_BIT12                           0x0090 0x0294 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B               0x0090 0x0294 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO32__LPUART6_TX                               0x0090 0x0294 0x0580 0x02 0x00
+#define IMX95_PAD_GPIO_IO32__LPSPI4_PCS2                              0x0090 0x0294 0x0538 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13                           0x0094 0x0298 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO33__LPUART6_RX                               0x0094 0x0298 0x057C 0x02 0x00
+#define IMX95_PAD_GPIO_IO33__LPSPI4_PCS1                              0x0094 0x0298 0x0534 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14                           0x0098 0x029C 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO34__LPUART6_CTS_B                            0x0098 0x029C 0x0578 0x02 0x00
+#define IMX95_PAD_GPIO_IO34__LPSPI4_PCS0                              0x0098 0x029C 0x0530 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO35__GPIO5_IO_BIT15                           0x009C 0x02A0 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B               0x009C 0x02A0 0x0000 0x01 0x00
+#define IMX95_PAD_GPIO_IO35__LPUART6_RTS_B                            0x009C 0x02A0 0x0000 0x02 0x00
+#define IMX95_PAD_GPIO_IO35__LPSPI4_SIN                               0x009C 0x02A0 0x0540 0x04 0x00
+
+#define IMX95_PAD_GPIO_IO36__LPSPI4_SOUT                              0x00A0 0x02A4 0x0544 0x04 0x00
+#define IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16                           0x00A0 0x02A4 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO36__LPUART7_TX                               0x00A0 0x02A4 0x0588 0x02 0x00
+
+#define IMX95_PAD_GPIO_IO37__GPIO5_IO_BIT17                           0x00A4 0x02A8 0x0000 0x00 0x00
+#define IMX95_PAD_GPIO_IO37__LPUART7_RX                               0x00A4 0x02A8 0x0584 0x02 0x00
+#define IMX95_PAD_GPIO_IO37__LPSPI4_SCK                               0x00A4 0x02A8 0x053C 0x04 0x00
+
+#define IMX95_PAD_CCM_CLKO1__CCMSRCGPCMIX_TOP_CLKO_1                  0x00A8 0x02AC 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO1__NETCMIX_TOP_NETC_TMR_1588_TRIG1          0x00A8 0x02AC 0x0434 0x01 0x00
+#define IMX95_PAD_CCM_CLKO1__FLEXIO1_FLEXIO_BIT26                     0x00A8 0x02AC 0x0458 0x04 0x00
+#define IMX95_PAD_CCM_CLKO1__GPIO3_IO_BIT26                           0x00A8 0x02AC 0x0000 0x05 0x00
+
+#define IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27                           0x00AC 0x02B0 0x0000 0x05 0x00
+#define IMX95_PAD_CCM_CLKO2__CCMSRCGPCMIX_TOP_CLKO_2                  0x00AC 0x02B0 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO2__NETCMIX_TOP_NETC_TMR_1588_PP1            0x00AC 0x02B0 0x0000 0x01 0x00
+#define IMX95_PAD_CCM_CLKO2__FLEXIO1_FLEXIO_BIT27                     0x00AC 0x02B0 0x045C 0x04 0x00
+
+#define IMX95_PAD_CCM_CLKO3__CCMSRCGPCMIX_TOP_CLKO_3                  0x00B0 0x02B4 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO3__NETCMIX_TOP_NETC_TMR_1588_TRIG2          0x00B0 0x02B4 0x0438 0x01 0x00
+#define IMX95_PAD_CCM_CLKO3__CAN3_TX                                  0x00B0 0x02B4 0x0000 0x02 0x00
+#define IMX95_PAD_CCM_CLKO3__FLEXIO2_FLEXIO_BIT28                     0x00B0 0x02B4 0x0000 0x04 0x00
+#define IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28                           0x00B0 0x02B4 0x0000 0x05 0x00
+
+#define IMX95_PAD_CCM_CLKO4__CCMSRCGPCMIX_TOP_CLKO_4                  0x00B4 0x02B8 0x0000 0x00 0x00
+#define IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2            0x00B4 0x02B8 0x0000 0x01 0x00
+#define IMX95_PAD_CCM_CLKO4__CAN3_RX                                  0x00B4 0x02B8 0x0448 0x02 0x00
+#define IMX95_PAD_CCM_CLKO4__FLEXIO2_FLEXIO_BIT29                     0x00B4 0x02B8 0x0000 0x04 0x00
+#define IMX95_PAD_CCM_CLKO4__GPIO4_IO_BIT29                           0x00B4 0x02B8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC                     0x00B8 0x02BC 0x0424 0x00 0x00
+#define IMX95_PAD_ENET1_MDC__LPUART3_DCD_B                            0x00B8 0x02BC 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_MDC__I3C2_SCL                                 0x00B8 0x02BC 0x04F8 0x02 0x00
+#define IMX95_PAD_ENET1_MDC__HSIOMIX_TOP_USB1_OTG_ID                  0x00B8 0x02BC 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_MDC__FLEXIO2_FLEXIO_BIT0                      0x00B8 0x02BC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0                            0x00B8 0x02BC 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO                   0x00BC 0x02C0 0x0428 0x00 0x00
+#define IMX95_PAD_ENET1_MDIO__LPUART3_RIN_B                           0x00BC 0x02C0 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_MDIO__I3C2_SDA                                0x00BC 0x02C0 0x04FC 0x02 0x00
+#define IMX95_PAD_ENET1_MDIO__HSIOMIX_TOP_USB1_OTG_PWR                0x00BC 0x02C0 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_MDIO__FLEXIO2_FLEXIO_BIT1                     0x00BC 0x02C0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_MDIO__GPIO4_IO_BIT1                           0x00BC 0x02C0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3               0x00C0 0x02C4 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD3__CAN2_TX                                  0x00C0 0x02C4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TD3__HSIOMIX_TOP_USB2_OTG_ID                  0x00C0 0x02C4 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_TD3__FLEXIO2_FLEXIO_BIT2                      0x00C0 0x02C4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD3__GPIO4_IO_BIT2                            0x00C0 0x02C4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2               0x00C4 0x02C8 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RMII_REF50_CLK          0x00C4 0x02C8 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TD2__CAN2_RX                                  0x00C4 0x02C8 0x0444 0x02 0x01
+#define IMX95_PAD_ENET1_TD2__HSIOMIX_TOP_USB2_OTG_OC                  0x00C4 0x02C8 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_TD2__FLEXIO2_FLEXIO_BIT3                      0x00C4 0x02C8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD2__GPIO4_IO_BIT3                            0x00C4 0x02C8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1               0x00C8 0x02CC 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD1__LPUART3_RTS_B                            0x00C8 0x02CC 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TD1__I3C2_PUR                                 0x00C8 0x02CC 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TD1__HSIOMIX_TOP_USB1_OTG_OC                  0x00C8 0x02CC 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_TD1__FLEXIO2_FLEXIO_BIT4                      0x00C8 0x02CC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD1__GPIO4_IO_BIT4                            0x00C8 0x02CC 0x0000 0x05 0x00
+#define IMX95_PAD_ENET1_TD1__I3C2_PUR_B                               0x00C8 0x02CC 0x0000 0x06 0x00
+#define IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RMII_TXD1               0x00C8 0x02CC 0x0000 0x07 0x00
+
+#define IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0               0x00CC 0x02D0 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TD0__LPUART3_TX                               0x00CC 0x02D0 0x055C 0x01 0x00
+#define IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RMII_TXD0               0x00CC 0x02D0 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TD0__FLEXIO2_FLEXIO_BIT5                      0x00CC 0x02D0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TD0__GPIO4_IO_BIT5                            0x00CC 0x02D0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL         0x00D0 0x02D4 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TX_CTL__LPUART3_DTR_B                         0x00D0 0x02D4 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RMII_TX_EN           0x00D0 0x02D4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO_BIT6                   0x00D0 0x02D4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TX_CTL__GPIO4_IO_BIT6                         0x00D0 0x02D4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK            0x00D4 0x02D8 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_TXC__CCMSRCGPCMIX_TOP_ENET_CLK_ROOT           0x00D4 0x02D8 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_TXC__FLEXIO2_FLEXIO_BIT7                      0x00D4 0x02D8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_TXC__GPIO4_IO_BIT7                            0x00D4 0x02D8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL         0x00D8 0x02DC 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RX_CTL__LPUART3_DSR_B                         0x00D8 0x02DC 0x0000 0x01 0x00
+#define IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RMII_CRS_DV          0x00D8 0x02DC 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_RX_CTL__HSIOMIX_TOP_USB2_OTG_PWR              0x00D8 0x02DC 0x0000 0x03 0x00
+#define IMX95_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO_BIT8                   0x00D8 0x02DC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RX_CTL__GPIO4_IO_BIT8                         0x00D8 0x02DC 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK            0x00DC 0x02E0 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RMII_RX_ER              0x00DC 0x02E0 0x042C 0x01 0x00
+#define IMX95_PAD_ENET1_RXC__FLEXIO2_FLEXIO_BIT9                      0x00DC 0x02E0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RXC__GPIO4_IO_BIT9                            0x00DC 0x02E0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0               0x00E0 0x02E4 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD0__LPUART3_RX                               0x00E0 0x02E4 0x0558 0x01 0x00
+#define IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RMII_RXD0               0x00E0 0x02E4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_RD0__FLEXIO2_FLEXIO_BIT10                     0x00E0 0x02E4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD0__GPIO4_IO_BIT10                           0x00E0 0x02E4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1               0x00E4 0x02E8 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD1__LPUART3_CTS_B                            0x00E4 0x02E8 0x0554 0x01 0x00
+#define IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RMII_RXD1               0x00E4 0x02E8 0x0000 0x02 0x00
+#define IMX95_PAD_ENET1_RD1__LPTMR2_ALT1                              0x00E4 0x02E8 0x0548 0x03 0x00
+#define IMX95_PAD_ENET1_RD1__FLEXIO2_FLEXIO_BIT11                     0x00E4 0x02E8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD1__GPIO4_IO_BIT11                           0x00E4 0x02E8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2               0x00E8 0x02EC 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RMII_RX_ER              0x00E8 0x02EC 0x042C 0x02 0x01
+#define IMX95_PAD_ENET1_RD2__LPTMR2_ALT2                              0x00E8 0x02EC 0x054C 0x03 0x00
+#define IMX95_PAD_ENET1_RD2__FLEXIO2_FLEXIO_BIT12                     0x00E8 0x02EC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD2__GPIO4_IO_BIT12                           0x00E8 0x02EC 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3               0x00EC 0x02F0 0x0000 0x00 0x00
+#define IMX95_PAD_ENET1_RD3__LPTMR2_ALT3                              0x00EC 0x02F0 0x0550 0x03 0x00
+#define IMX95_PAD_ENET1_RD3__FLEXIO2_FLEXIO_BIT13                     0x00EC 0x02F0 0x0000 0x04 0x00
+#define IMX95_PAD_ENET1_RD3__GPIO4_IO_BIT13                           0x00EC 0x02F0 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC                     0x00F0 0x02F4 0x0424 0x00 0x01
+#define IMX95_PAD_ENET2_MDC__LPUART4_DCD_B                            0x00F0 0x02F4 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC                 0x00F0 0x02F4 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_MDC__FLEXIO2_FLEXIO_BIT14                     0x00F0 0x02F4 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_MDC__GPIO4_IO_BIT14                           0x00F0 0x02F4 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO                   0x00F4 0x02F8 0x0428 0x00 0x01
+#define IMX95_PAD_ENET2_MDIO__LPUART4_RIN_B                           0x00F4 0x02F8 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK                0x00F4 0x02F8 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_MDIO__FLEXIO2_FLEXIO_BIT15                    0x00F4 0x02F8 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_MDIO__GPIO4_IO_BIT15                          0x00F4 0x02F8 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0            0x00F8 0x02FC 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD3__FLEXIO2_FLEXIO_BIT16                     0x00F8 0x02FC 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD3__GPIO4_IO_BIT16                           0x00F8 0x02FC 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3               0x00F8 0x02FC 0x0000 0x00 0x00
+
+#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2               0x00FC 0x0300 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RMII_REF50_CLK          0x00FC 0x0300 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1            0x00FC 0x0300 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD2__SAI4_TX_SYNC                             0x00FC 0x0300 0x05A4 0x03 0x00
+#define IMX95_PAD_ENET2_TD2__FLEXIO2_FLEXIO_BIT17                     0x00FC 0x0300 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD2__GPIO4_IO_BIT17                           0x00FC 0x0300 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1               0x0100 0x0304 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TD1__LPUART4_RTS_B                            0x0100 0x0304 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_SAI2_RX_DATA_BIT2            0x0100 0x0304 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD1__SAI4_TX_BCLK                             0x0100 0x0304 0x05A0 0x03 0x00
+#define IMX95_PAD_ENET2_TD1__FLEXIO2_FLEXIO_BIT18                     0x0100 0x0304 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD1__GPIO4_IO_BIT18                           0x0100 0x0304 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RMII_TXD1               0x0100 0x0304 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0               0x0104 0x0308 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TD0__LPUART4_TX                               0x0104 0x0308 0x0568 0x01 0x00
+#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_SAI2_RX_DATA_BIT3            0x0104 0x0308 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TD0__SAI4_TX_DATA_BIT0                        0x0104 0x0308 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_TD0__FLEXIO2_FLEXIO_BIT19                     0x0104 0x0308 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TD0__GPIO4_IO_BIT19                           0x0104 0x0308 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RMII_TXD0               0x0104 0x0308 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL         0x0108 0x030C 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TX_CTL__LPUART4_DTR_B                         0x0108 0x030C 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC              0x0108 0x030C 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RMII_TX_EN           0x0108 0x030C 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO_BIT20                  0x0108 0x030C 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TX_CTL__GPIO4_IO_BIT20                        0x0108 0x030C 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK            0x010C 0x0310 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_TXC__CCMSRCGPCMIX_TOP_ENET_CLK_ROOT           0x010C 0x0310 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK                 0x010C 0x0310 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_TXC__FLEXIO2_FLEXIO_BIT21                     0x010C 0x0310 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_TXC__GPIO4_IO_BIT21                           0x010C 0x0310 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL         0x0110 0x0314 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RX_CTL__LPUART4_DSR_B                         0x0110 0x0314 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0         0x0110 0x0314 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO_BIT22                  0x0110 0x0314 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RX_CTL__GPIO4_IO_BIT22                        0x0110 0x0314 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RMII_CRS_DV          0x0110 0x0314 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK            0x0114 0x0318 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RMII_RX_ER              0x0114 0x0318 0x0430 0x01 0x00
+#define IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1            0x0114 0x0318 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RXC__SAI4_RX_SYNC                             0x0114 0x0318 0x059C 0x03 0x00
+#define IMX95_PAD_ENET2_RXC__FLEXIO2_FLEXIO_BIT23                     0x0114 0x0318 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RXC__GPIO4_IO_BIT23                           0x0114 0x0318 0x0000 0x05 0x00
+
+#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0               0x0118 0x031C 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD0__LPUART4_RX                               0x0118 0x031C 0x0564 0x01 0x00
+#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2            0x0118 0x031C 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RD0__SAI4_RX_BCLK                             0x0118 0x031C 0x0594 0x03 0x00
+#define IMX95_PAD_ENET2_RD0__FLEXIO2_FLEXIO_BIT24                     0x0118 0x031C 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD0__GPIO4_IO_BIT24                           0x0118 0x031C 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RMII_RXD0               0x0118 0x031C 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1               0x011C 0x0320 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD1__SPDIF_IN                                 0x011C 0x0320 0x0454 0x01 0x00
+#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3            0x011C 0x0320 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RD1__SAI4_RX_DATA_BIT0                        0x011C 0x0320 0x0598 0x03 0x00
+#define IMX95_PAD_ENET2_RD1__FLEXIO2_FLEXIO_BIT25                     0x011C 0x0320 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD1__GPIO4_IO_BIT25                           0x011C 0x0320 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RMII_RXD1               0x011C 0x0320 0x0000 0x06 0x00
+
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2               0x0120 0x0324 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD2__LPUART4_CTS_B                            0x0120 0x0324 0x0560 0x01 0x00
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK                    0x0120 0x0324 0x0000 0x02 0x00
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_MQS2_RIGHT                   0x0120 0x0324 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_RD2__FLEXIO2_FLEXIO_BIT26                     0x0120 0x0324 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD2__GPIO4_IO_BIT26                           0x0120 0x0324 0x0000 0x05 0x00
+#define IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RMII_RX_ER              0x0120 0x0324 0x0430 0x06 0x01
+
+#define IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3               0x0124 0x0328 0x0000 0x00 0x00
+#define IMX95_PAD_ENET2_RD3__SPDIF_OUT                                0x0124 0x0328 0x0000 0x01 0x00
+#define IMX95_PAD_ENET2_RD3__SPDIF_IN                                 0x0124 0x0328 0x0454 0x02 0x01
+#define IMX95_PAD_ENET2_RD3__NETCMIX_TOP_MQS2_LEFT                    0x0124 0x0328 0x0000 0x03 0x00
+#define IMX95_PAD_ENET2_RD3__FLEXIO2_FLEXIO_BIT27                     0x0124 0x0328 0x0000 0x04 0x00
+#define IMX95_PAD_ENET2_RD3__GPIO4_IO_BIT27                           0x0124 0x0328 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_CLK__FLEXIO1_FLEXIO_BIT8                        0x0128 0x032C 0x0488 0x04 0x01
+#define IMX95_PAD_SD1_CLK__GPIO3_IO_BIT8                              0x0128 0x032C 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_CLK__USDHC1_CLK                                 0x0128 0x032C 0x0000 0x00 0x00
+
+#define IMX95_PAD_SD1_CMD__USDHC1_CMD                                 0x012C 0x0330 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_CMD__FLEXIO1_FLEXIO_BIT9                        0x012C 0x0330 0x048C 0x04 0x01
+#define IMX95_PAD_SD1_CMD__GPIO3_IO_BIT9                              0x012C 0x0330 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA0__USDHC1_DATA0                             0x0130 0x0334 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA0__FLEXIO1_FLEXIO_BIT10                     0x0130 0x0334 0x0490 0x04 0x01
+#define IMX95_PAD_SD1_DATA0__GPIO3_IO_BIT10                           0x0130 0x0334 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA1__USDHC1_DATA1                             0x0134 0x0338 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA1__FLEXIO1_FLEXIO_BIT11                     0x0134 0x0338 0x0494 0x04 0x01
+#define IMX95_PAD_SD1_DATA1__GPIO3_IO_BIT11                           0x0134 0x0338 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA2__USDHC1_DATA2                             0x0138 0x033C 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA2__FLEXIO1_FLEXIO_BIT12                     0x0138 0x033C 0x0498 0x04 0x01
+#define IMX95_PAD_SD1_DATA2__GPIO3_IO_BIT12                           0x0138 0x033C 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA2__CCMSRCGPCMIX_TOP_PMIC_READY              0x0138 0x033C 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA3__USDHC1_DATA3                             0x013C 0x0340 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B                         0x013C 0x0340 0x0000 0x01 0x00
+#define IMX95_PAD_SD1_DATA3__FLEXIO1_FLEXIO_BIT13                     0x013C 0x0340 0x049C 0x04 0x01
+#define IMX95_PAD_SD1_DATA3__GPIO3_IO_BIT13                           0x013C 0x0340 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD1_DATA4__USDHC1_DATA4                             0x0140 0x0344 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA4__FLEXSPI1_A_DATA_BIT4                     0x0140 0x0344 0x04E4 0x01 0x00
+#define IMX95_PAD_SD1_DATA4__FLEXIO1_FLEXIO_BIT14                     0x0140 0x0344 0x04A0 0x04 0x01
+#define IMX95_PAD_SD1_DATA4__GPIO3_IO_BIT14                           0x0140 0x0344 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA4__XSPI_DATA_BIT4                           0x0140 0x0344 0x05FC 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA5__USDHC1_DATA5                             0x0144 0x0348 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA5__FLEXSPI1_A_DATA_BIT5                     0x0144 0x0348 0x04E8 0x01 0x00
+#define IMX95_PAD_SD1_DATA5__USDHC1_RESET_B                           0x0144 0x0348 0x0000 0x02 0x00
+#define IMX95_PAD_SD1_DATA5__FLEXIO1_FLEXIO_BIT15                     0x0144 0x0348 0x04A4 0x04 0x01
+#define IMX95_PAD_SD1_DATA5__GPIO3_IO_BIT15                           0x0144 0x0348 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA5__XSPI_DATA_BIT5                           0x0144 0x0348 0x0600 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA6__USDHC1_DATA6                             0x0148 0x034C 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA6__FLEXSPI1_A_DATA_BIT6                     0x0148 0x034C 0x04EC 0x01 0x00
+#define IMX95_PAD_SD1_DATA6__USDHC1_CD_B                              0x0148 0x034C 0x0000 0x02 0x00
+#define IMX95_PAD_SD1_DATA6__FLEXIO1_FLEXIO_BIT16                     0x0148 0x034C 0x04A8 0x04 0x01
+#define IMX95_PAD_SD1_DATA6__GPIO3_IO_BIT16                           0x0148 0x034C 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA6__XSPI_DATA_BIT6                           0x0148 0x034C 0x0604 0x06 0x00
+
+#define IMX95_PAD_SD1_DATA7__USDHC1_DATA7                             0x014C 0x0350 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_DATA7__FLEXSPI1_A_DATA_BIT7                     0x014C 0x0350 0x04F0 0x01 0x00
+#define IMX95_PAD_SD1_DATA7__USDHC1_WP                                0x014C 0x0350 0x0000 0x02 0x00
+#define IMX95_PAD_SD1_DATA7__FLEXIO1_FLEXIO_BIT17                     0x014C 0x0350 0x04AC 0x04 0x01
+#define IMX95_PAD_SD1_DATA7__GPIO3_IO_BIT17                           0x014C 0x0350 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_DATA7__XSPI_DATA_BIT7                           0x014C 0x0350 0x0608 0x06 0x00
+
+#define IMX95_PAD_SD1_STROBE__USDHC1_STROBE                           0x0150 0x0354 0x0000 0x00 0x00
+#define IMX95_PAD_SD1_STROBE__FLEXSPI1_A_DQS                          0x0150 0x0354 0x04D0 0x01 0x00
+#define IMX95_PAD_SD1_STROBE__FLEXIO1_FLEXIO_BIT18                    0x0150 0x0354 0x04B0 0x04 0x01
+#define IMX95_PAD_SD1_STROBE__GPIO3_IO_BIT18                          0x0150 0x0354 0x0000 0x05 0x00
+#define IMX95_PAD_SD1_STROBE__XSPI_DQS                                0x0150 0x0354 0x05E4 0x06 0x00
+
+#define IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT                         0x0154 0x0358 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_VSELECT__USDHC2_WP                              0x0154 0x0358 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_VSELECT__LPTMR2_ALT3                            0x0154 0x0358 0x0550 0x02 0x01
+#define IMX95_PAD_SD2_VSELECT__FLEXIO1_FLEXIO_BIT19                   0x0154 0x0358 0x04B4 0x04 0x01
+#define IMX95_PAD_SD2_VSELECT__GPIO3_IO_BIT19                         0x0154 0x0358 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_VSELECT__CCMSRCGPCMIX_TOP_EXT_CLK1              0x0154 0x0358 0x0420 0x06 0x01
+
+#define IMX95_PAD_SD3_CLK__USDHC3_CLK                                 0x0158 0x035C 0x05C8 0x00 0x01
+#define IMX95_PAD_SD3_CLK__FLEXSPI1_A_SCLK                            0x0158 0x035C 0x04F4 0x01 0x00
+#define IMX95_PAD_SD3_CLK__SAI5_TX_DATA_BIT1                          0x0158 0x035C 0x0000 0x02 0x00
+#define IMX95_PAD_SD3_CLK__SAI5_RX_DATA_BIT0                          0x0158 0x035C 0x05AC 0x03 0x00
+#define IMX95_PAD_SD3_CLK__FLEXIO1_FLEXIO_BIT20                       0x0158 0x035C 0x04B8 0x04 0x01
+#define IMX95_PAD_SD3_CLK__GPIO3_IO_BIT20                             0x0158 0x035C 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_CLK__XSPI_CLK                                   0x0158 0x035C 0x05E8 0x06 0x00
+
+#define IMX95_PAD_SD3_CMD__USDHC3_CMD                                 0x015C 0x0360 0x05CC 0x00 0x01
+#define IMX95_PAD_SD3_CMD__FLEXSPI1_A_SS0_B                           0x015C 0x0360 0x0000 0x01 0x00
+#define IMX95_PAD_SD3_CMD__SAI5_TX_DATA_BIT2                          0x015C 0x0360 0x0000 0x02 0x00
+#define IMX95_PAD_SD3_CMD__SAI5_RX_SYNC                               0x015C 0x0360 0x05BC 0x03 0x00
+#define IMX95_PAD_SD3_CMD__FLEXIO1_FLEXIO_BIT21                       0x015C 0x0360 0x04BC 0x04 0x01
+#define IMX95_PAD_SD3_CMD__GPIO3_IO_BIT21                             0x015C 0x0360 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_CMD__XSPI_CS                                    0x015C 0x0360 0x05E0 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA0__USDHC3_DATA0                             0x0160 0x0364 0x05D0 0x00 0x01
+#define IMX95_PAD_SD3_DATA0__FLEXSPI1_A_DATA_BIT0                     0x0160 0x0364 0x04D4 0x01 0x00
+#define IMX95_PAD_SD3_DATA0__SAI5_TX_DATA_BIT3                        0x0160 0x0364 0x0000 0x02 0x00
+#define IMX95_PAD_SD3_DATA0__SAI5_RX_BCLK                             0x0160 0x0364 0x05A8 0x03 0x00
+#define IMX95_PAD_SD3_DATA0__FLEXIO1_FLEXIO_BIT22                     0x0160 0x0364 0x04C0 0x04 0x01
+#define IMX95_PAD_SD3_DATA0__GPIO3_IO_BIT22                           0x0160 0x0364 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA0__XSPI_DATA_BIT0                           0x0160 0x0364 0x05EC 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA1__USDHC3_DATA1                             0x0164 0x0368 0x05D4 0x00 0x01
+#define IMX95_PAD_SD3_DATA1__FLEXSPI1_A_DATA_BIT1                     0x0164 0x0368 0x04D8 0x01 0x00
+#define IMX95_PAD_SD3_DATA1__SAI5_RX_DATA_BIT1                        0x0164 0x0368 0x05B0 0x02 0x00
+#define IMX95_PAD_SD3_DATA1__SAI5_TX_DATA_BIT0                        0x0164 0x0368 0x0000 0x03 0x00
+#define IMX95_PAD_SD3_DATA1__FLEXIO1_FLEXIO_BIT23                     0x0164 0x0368 0x04C4 0x04 0x01
+#define IMX95_PAD_SD3_DATA1__GPIO3_IO_BIT23                           0x0164 0x0368 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA1__XSPI_DATA_BIT1                           0x0164 0x0368 0x05F0 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA2__USDHC3_DATA2                             0x0168 0x036C 0x05D8 0x00 0x01
+#define IMX95_PAD_SD3_DATA2__FLEXSPI1_A_DATA_BIT2                     0x0168 0x036C 0x04DC 0x01 0x00
+#define IMX95_PAD_SD3_DATA2__SAI5_RX_DATA_BIT2                        0x0168 0x036C 0x05B4 0x02 0x00
+#define IMX95_PAD_SD3_DATA2__SAI5_TX_SYNC                             0x0168 0x036C 0x05C4 0x03 0x00
+#define IMX95_PAD_SD3_DATA2__FLEXIO1_FLEXIO_BIT24                     0x0168 0x036C 0x04C8 0x04 0x01
+#define IMX95_PAD_SD3_DATA2__GPIO3_IO_BIT24                           0x0168 0x036C 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA2__XSPI_DATA_BIT2                           0x0168 0x036C 0x05F4 0x06 0x00
+
+#define IMX95_PAD_SD3_DATA3__USDHC3_DATA3                             0x016C 0x0370 0x05DC 0x00 0x01
+#define IMX95_PAD_SD3_DATA3__FLEXSPI1_A_DATA_BIT3                     0x016C 0x0370 0x04E0 0x01 0x00
+#define IMX95_PAD_SD3_DATA3__SAI5_RX_DATA_BIT3                        0x016C 0x0370 0x05B8 0x02 0x00
+#define IMX95_PAD_SD3_DATA3__SAI5_TX_BCLK                             0x016C 0x0370 0x05C0 0x03 0x00
+#define IMX95_PAD_SD3_DATA3__FLEXIO1_FLEXIO_BIT25                     0x016C 0x0370 0x04CC 0x04 0x01
+#define IMX95_PAD_SD3_DATA3__GPIO3_IO_BIT25                           0x016C 0x0370 0x0000 0x05 0x00
+#define IMX95_PAD_SD3_DATA3__XSPI_DATA_BIT3                           0x016C 0x0370 0x05F8 0x06 0x00
+
+#define IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0                   0x0170 0x0374 0x04D4 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA0__NETCMIX_TOP_SAI2_TX_DATA_BIT4          0x0170 0x0374 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA0__SAI4_TX_BCLK                           0x0170 0x0374 0x05A0 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA0__SAI4_RX_DATA_BIT1                      0x0170 0x0374 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA0__XSPI_DATA_BIT0                         0x0170 0x0374 0x05EC 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA0__GPIO5_IO_BIT0                          0x0170 0x0374 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1                   0x0174 0x0378 0x04D8 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA1__NETCMIX_TOP_SAI2_TX_DATA_BIT5          0x0174 0x0378 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA1__SAI4_TX_SYNC                           0x0174 0x0378 0x05A4 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA1__SAI4_TX_DATA_BIT1                      0x0174 0x0378 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA1__XSPI_DATA_BIT1                         0x0174 0x0378 0x05F0 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA1__GPIO5_IO_BIT1                          0x0174 0x0378 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2                   0x0178 0x037C 0x04DC 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA2__NETCMIX_TOP_SAI2_TX_DATA_BIT6          0x0178 0x037C 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA2__SAI4_TX_DATA_BIT0                      0x0178 0x037C 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_DATA2__XSPI_DATA_BIT2                         0x0178 0x037C 0x05F4 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA2__GPIO5_IO_BIT2                          0x0178 0x037C 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3                   0x017C 0x0380 0x04E0 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA3__NETCMIX_TOP_SAI2_TX_DATA_BIT7          0x017C 0x0380 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA3__SAI4_RX_DATA_BIT0                      0x017C 0x0380 0x0598 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA3__XSPI_DATA_BIT3                         0x017C 0x0380 0x05F8 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA3__GPIO5_IO_BIT3                          0x017C 0x0380 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4                   0x0180 0x0384 0x04E4 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0                      0x0180 0x0384 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_DATA4__SAI5_RX_DATA_BIT1                      0x0180 0x0384 0x05B0 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA4__XSPI_DATA_BIT4                         0x0180 0x0384 0x05FC 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA4__GPIO5_IO_BIT4                          0x0180 0x0384 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5                   0x0184 0x0388 0x04E8 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC                           0x0184 0x0388 0x05C4 0x01 0x01
+#define IMX95_PAD_XSPI1_DATA5__SAI5_RX_DATA_BIT2                      0x0184 0x0388 0x05B4 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA5__NETCMIX_TOP_SAI2_RX_DATA_BIT6          0x0184 0x0388 0x043C 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA5__XSPI_DATA_BIT5                         0x0184 0x0388 0x0600 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA5__GPIO5_IO_BIT5                          0x0184 0x0388 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6                   0x0188 0x038C 0x04EC 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK                           0x0188 0x038C 0x05C0 0x01 0x01
+#define IMX95_PAD_XSPI1_DATA6__SAI5_RX_DATA_BIT3                      0x0188 0x038C 0x05B8 0x02 0x01
+#define IMX95_PAD_XSPI1_DATA6__NETCMIX_TOP_SAI2_RX_DATA_BIT7          0x0188 0x038C 0x0440 0x03 0x00
+#define IMX95_PAD_XSPI1_DATA6__XSPI_DATA_BIT6                         0x0188 0x038C 0x0604 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA6__GPIO5_IO_BIT6                          0x0188 0x038C 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7                   0x018C 0x0390 0x04F0 0x00 0x01
+#define IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0                      0x018C 0x0390 0x05AC 0x01 0x01
+#define IMX95_PAD_XSPI1_DATA7__SAI5_TX_DATA_BIT1                      0x018C 0x0390 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_DATA7__XSPI_DATA_BIT7                         0x018C 0x0390 0x0608 0x04 0x01
+#define IMX95_PAD_XSPI1_DATA7__GPIO5_IO_BIT7                          0x018C 0x0390 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS                           0x0190 0x0394 0x04D0 0x00 0x01
+#define IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC                             0x0190 0x0394 0x05BC 0x01 0x01
+#define IMX95_PAD_XSPI1_DQS__SAI5_TX_DATA_BIT2                        0x0190 0x0394 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_DQS__NETCMIX_TOP_SAI2_RX_DATA_BIT6            0x0190 0x0394 0x043C 0x03 0x01
+#define IMX95_PAD_XSPI1_DQS__XSPI_DQS                                 0x0190 0x0394 0x05E4 0x04 0x01
+#define IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8                            0x0190 0x0394 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK                         0x0194 0x0398 0x04F4 0x00 0x01
+#define IMX95_PAD_XSPI1_SCLK__NETCMIX_TOP_SAI2_RX_DATA_BIT4           0x0194 0x0398 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_SCLK__SAI4_RX_SYNC                            0x0194 0x0398 0x059C 0x02 0x01
+#define IMX95_PAD_XSPI1_SCLK__EARC_DC_HPD_IN                          0x0194 0x0398 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_SCLK__XSPI_CLK                                0x0194 0x0398 0x05E8 0x04 0x01
+#define IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9                           0x0194 0x0398 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B                       0x0198 0x039C 0x0000 0x00 0x00
+#define IMX95_PAD_XSPI1_SS0_B__NETCMIX_TOP_SAI2_RX_DATA_BIT5          0x0198 0x039C 0x0000 0x01 0x00
+#define IMX95_PAD_XSPI1_SS0_B__SAI4_RX_BCLK                           0x0198 0x039C 0x0594 0x02 0x01
+#define IMX95_PAD_XSPI1_SS0_B__EARC_CEC_OUT                           0x0198 0x039C 0x0000 0x03 0x00
+#define IMX95_PAD_XSPI1_SS0_B__XSPI_CS                                0x0198 0x039C 0x05E0 0x04 0x01
+#define IMX95_PAD_XSPI1_SS0_B__GPIO5_IO_BIT10                         0x0198 0x039C 0x0000 0x05 0x00
+
+#define IMX95_PAD_XSPI1_SS1_B__FLEXSPI1_A_SS1_B                       0x019C 0x03A0 0x0000 0x00 0x00
+#define IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK                           0x019C 0x03A0 0x05A8 0x01 0x01
+#define IMX95_PAD_XSPI1_SS1_B__SAI5_TX_DATA_BIT3                      0x019C 0x03A0 0x0000 0x02 0x00
+#define IMX95_PAD_XSPI1_SS1_B__NETCMIX_TOP_SAI2_RX_DATA_BIT7          0x019C 0x03A0 0x0440 0x03 0x01
+#define IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11                         0x019C 0x03A0 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_CD_B__USDHC2_CD_B                               0x01A0 0x03A4 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_CD_B__NETCMIX_TOP_NETC_TMR_1588_TRIG1           0x01A0 0x03A4 0x0434 0x01 0x01
+#define IMX95_PAD_SD2_CD_B__I3C2_SCL                                  0x01A0 0x03A4 0x04F8 0x02 0x01
+#define IMX95_PAD_SD2_CD_B__FLEXIO1_FLEXIO_BIT0                       0x01A0 0x03A4 0x0468 0x04 0x01
+#define IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0                             0x01A0 0x03A4 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_CLK__USDHC2_CLK                                 0x01A4 0x03A8 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_CLK__NETCMIX_TOP_NETC_TMR_1588_PP1              0x01A4 0x03A8 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_CLK__I3C2_SDA                                   0x01A4 0x03A8 0x04FC 0x02 0x01
+#define IMX95_PAD_SD2_CLK__FLEXIO1_FLEXIO_BIT1                        0x01A4 0x03A8 0x046C 0x04 0x01
+#define IMX95_PAD_SD2_CLK__GPIO3_IO_BIT1                              0x01A4 0x03A8 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_CLK__CCMSRCGPCMIX_TOP_OBSERVE_0                 0x01A4 0x03A8 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD2_CMD__USDHC2_CMD                                 0x01A8 0x03AC 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_CMD__NETCMIX_TOP_NETC_TMR_1588_TRIG2            0x01A8 0x03AC 0x0438 0x01 0x01
+#define IMX95_PAD_SD2_CMD__I3C2_PUR                                   0x01A8 0x03AC 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_CMD__I3C2_PUR_B                                 0x01A8 0x03AC 0x0000 0x03 0x00
+#define IMX95_PAD_SD2_CMD__FLEXIO1_FLEXIO_BIT2                        0x01A8 0x03AC 0x0470 0x04 0x01
+#define IMX95_PAD_SD2_CMD__GPIO3_IO_BIT2                              0x01A8 0x03AC 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_CMD__CCMSRCGPCMIX_TOP_OBSERVE_1                 0x01A8 0x03AC 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD2_DATA0__USDHC2_DATA0                             0x01AC 0x03B0 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA0__NETCMIX_TOP_NETC_TMR_1588_PP2            0x01AC 0x03B0 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_DATA0__CAN2_TX                                  0x01AC 0x03B0 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_DATA0__FLEXIO1_FLEXIO_BIT3                      0x01AC 0x03B0 0x0474 0x04 0x01
+#define IMX95_PAD_SD2_DATA0__GPIO3_IO_BIT3                            0x01AC 0x03B0 0x0000 0x05 0x00
+#define IMX95_PAD_SD2_DATA0__CCMSRCGPCMIX_TOP_OBSERVE_2               0x01AC 0x03B0 0x0000 0x06 0x00
+
+#define IMX95_PAD_SD2_DATA1__USDHC2_DATA1                             0x01B0 0x03B4 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA1__NETCMIX_TOP_NETC_TMR_1588_CLK            0x01B0 0x03B4 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_DATA1__CAN2_RX                                  0x01B0 0x03B4 0x0444 0x02 0x03
+#define IMX95_PAD_SD2_DATA1__FLEXIO1_FLEXIO_BIT4                      0x01B0 0x03B4 0x0478 0x04 0x01
+#define IMX95_PAD_SD2_DATA1__GPIO3_IO_BIT4                            0x01B0 0x03B4 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_DATA2__USDHC2_DATA2                             0x01B4 0x03B8 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA2__NETCMIX_TOP_NETC_TMR_1588_PP3            0x01B4 0x03B8 0x0000 0x01 0x00
+#define IMX95_PAD_SD2_DATA2__NETCMIX_TOP_MQS2_RIGHT                   0x01B4 0x03B8 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_DATA2__FLEXIO1_FLEXIO_BIT5                      0x01B4 0x03B8 0x047C 0x04 0x01
+#define IMX95_PAD_SD2_DATA2__GPIO3_IO_BIT5                            0x01B4 0x03B8 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_DATA3__USDHC2_DATA3                             0x01B8 0x03BC 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_DATA3__LPTMR2_ALT1                              0x01B8 0x03BC 0x0548 0x01 0x01
+#define IMX95_PAD_SD2_DATA3__NETCMIX_TOP_MQS2_LEFT                    0x01B8 0x03BC 0x0000 0x02 0x00
+#define IMX95_PAD_SD2_DATA3__NETCMIX_TOP_NETC_TMR_1588_ALARM1         0x01B8 0x03BC 0x0000 0x03 0x00
+#define IMX95_PAD_SD2_DATA3__FLEXIO1_FLEXIO_BIT6                      0x01B8 0x03BC 0x0480 0x04 0x01
+#define IMX95_PAD_SD2_DATA3__GPIO3_IO_BIT6                            0x01B8 0x03BC 0x0000 0x05 0x00
+
+#define IMX95_PAD_SD2_RESET_B__USDHC2_RESET_B                         0x01BC 0x03C0 0x0000 0x00 0x00
+#define IMX95_PAD_SD2_RESET_B__LPTMR2_ALT2                            0x01BC 0x03C0 0x054C 0x01 0x01
+#define IMX95_PAD_SD2_RESET_B__NETCMIX_TOP_NETC_TMR_1588_GCLK         0x01BC 0x03C0 0x0000 0x03 0x00
+#define IMX95_PAD_SD2_RESET_B__FLEXIO1_FLEXIO_BIT7                    0x01BC 0x03C0 0x0484 0x04 0x01
+#define IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7                          0x01BC 0x03C0 0x0000 0x05 0x00
+
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL                     0x01C0 0x03C4 0x0000 0x00 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_I3C1_SCL                       0x01C0 0x03C4 0x0000 0x01 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPUART1_DCD_B                  0x01C0 0x03C4 0x0000 0x02 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_TPM2_CH0                       0x01C0 0x03C4 0x0000 0x03 0x00
+#define IMX95_PAD_I2C1_SCL__VPUMIX_TOP_UART_RX                        0x01C0 0x03C4 0x0000 0x04 0x00
+#define IMX95_PAD_I2C1_SCL__AONMIX_TOP_GPIO1_IO_BIT0                  0x01C0 0x03C4 0x0000 0x05 0x00
+
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA                     0x01C4 0x03C8 0x0000 0x00 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_I3C1_SDA                       0x01C4 0x03C8 0x0000 0x01 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPUART1_RIN_B                  0x01C4 0x03C8 0x0000 0x02 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_TPM2_CH1                       0x01C4 0x03C8 0x0000 0x03 0x00
+#define IMX95_PAD_I2C1_SDA__VPUMIX_TOP_UART_TX                        0x01C4 0x03C8 0x0000 0x04 0x00
+#define IMX95_PAD_I2C1_SDA__AONMIX_TOP_GPIO1_IO_BIT1                  0x01C4 0x03C8 0x0000 0x05 0x00
+
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL                     0x01C8 0x03CC 0x0000 0x00 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_I3C1_PUR                       0x01C8 0x03CC 0x0000 0x01 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPUART2_DCD_B                  0x01C8 0x03CC 0x0000 0x02 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_TPM2_CH2                       0x01C8 0x03CC 0x0000 0x03 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_SAI1_RX_SYNC                   0x01C8 0x03CC 0x0000 0x04 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_GPIO1_IO_BIT2                  0x01C8 0x03CC 0x0000 0x05 0x00
+#define IMX95_PAD_I2C2_SCL__AONMIX_TOP_I3C1_PUR_B                     0x01C8 0x03CC 0x0000 0x06 0x00
+
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA                     0x01CC 0x03D0 0x0000 0x00 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPUART2_RIN_B                  0x01CC 0x03D0 0x0000 0x02 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_TPM2_CH3                       0x01CC 0x03D0 0x0000 0x03 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_SAI1_RX_BCLK                   0x01CC 0x03D0 0x0000 0x04 0x00
+#define IMX95_PAD_I2C2_SDA__AONMIX_TOP_GPIO1_IO_BIT3                  0x01CC 0x03D0 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX                    0x01D0 0x03D4 0x0000 0x00 0x00
+#define IMX95_PAD_UART1_RXD__S400_UART_RX                             0x01D0 0x03D4 0x0000 0x01 0x00
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_LPSPI2_SIN                    0x01D0 0x03D4 0x0000 0x02 0x00
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_TPM1_CH0                      0x01D0 0x03D4 0x0000 0x03 0x00
+#define IMX95_PAD_UART1_RXD__AONMIX_TOP_GPIO1_IO_BIT4                 0x01D0 0x03D4 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX                    0x01D4 0x03D8 0x0000 0x00 0x00
+#define IMX95_PAD_UART1_TXD__S400_UART_TX                             0x01D4 0x03D8 0x0000 0x01 0x00
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_LPSPI2_PCS0                   0x01D4 0x03D8 0x0000 0x02 0x00
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_TPM1_CH1                      0x01D4 0x03D8 0x0000 0x03 0x00
+#define IMX95_PAD_UART1_TXD__AONMIX_TOP_GPIO1_IO_BIT5                 0x01D4 0x03D8 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX                    0x01D8 0x03DC 0x0000 0x00 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART1_CTS_B                 0x01D8 0x03DC 0x0000 0x01 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_LPSPI2_SOUT                   0x01D8 0x03DC 0x0000 0x02 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_TPM1_CH2                      0x01D8 0x03DC 0x0000 0x03 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_SAI1_MCLK                     0x01D8 0x03DC 0x041C 0x04 0x00
+#define IMX95_PAD_UART2_RXD__AONMIX_TOP_GPIO1_IO_BIT6                 0x01D8 0x03DC 0x0000 0x05 0x00
+
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX                    0x01DC 0x03E0 0x0000 0x00 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART1_RTS_B                 0x01DC 0x03E0 0x0000 0x01 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_LPSPI2_SCK                    0x01DC 0x03E0 0x0000 0x02 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_TPM1_CH3                      0x01DC 0x03E0 0x0000 0x03 0x00
+#define IMX95_PAD_UART2_TXD__AONMIX_TOP_GPIO1_IO_BIT7                 0x01DC 0x03E0 0x0000 0x05 0x00
+
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK                         0x01E0 0x03E4 0x0000 0x00 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_MQS1_LEFT                       0x01E0 0x03E4 0x0000 0x01 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_LPTMR1_ALT1                     0x01E0 0x03E4 0x0000 0x04 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_GPIO1_IO_BIT8                   0x01E0 0x03E4 0x0000 0x05 0x00
+#define IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX                         0x01E0 0x03E4 0x0000 0x06 0x00
+
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0     0x01E4 0x03E8 0x040C 0x00 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_MQS1_RIGHT              0x01E4 0x03E8 0x0000 0x01 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_LPSPI1_PCS1             0x01E4 0x03E8 0x0000 0x02 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_TPM1_EXTCLK             0x01E4 0x03E8 0x0000 0x03 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_LPTMR1_ALT2             0x01E4 0x03E8 0x0000 0x04 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_GPIO1_IO_BIT9           0x01E4 0x03E8 0x0000 0x05 0x00
+#define IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX                 0x01E4 0x03E8 0x0408 0x06 0x00
+
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_PDM_BIT_STREAM_BIT1     0x01E8 0x03EC 0x0410 0x00 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI                       0x01E8 0x03EC 0x0000 0x01 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_LPSPI2_PCS1             0x01E8 0x03EC 0x0000 0x02 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_TPM2_EXTCLK             0x01E8 0x03EC 0x0000 0x03 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_LPTMR1_ALT3             0x01E8 0x03EC 0x0000 0x04 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10          0x01E8 0x03EC 0x0000 0x05 0x00
+#define IMX95_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_TOP_EXT_CLK1          0x01E8 0x03EC 0x0420 0x06 0x00
+
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC                  0x01EC 0x03F0 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_DATA_BIT1             0x01EC 0x03F0 0x0000 0x01 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_LPSPI1_PCS0                   0x01EC 0x03F0 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_LPUART2_DTR_B                 0x01EC 0x03F0 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_MQS1_LEFT                     0x01EC 0x03F0 0x0000 0x04 0x00
+#define IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11                0x01EC 0x03F0 0x0000 0x05 0x00
+
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK                   0x01F0 0x03F4 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPUART2_CTS_B                  0x01F0 0x03F4 0x0000 0x01 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPSPI1_SIN                     0x01F0 0x03F4 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPUART1_DSR_B                  0x01F0 0x03F4 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_CAN1_RX                        0x01F0 0x03F4 0x0408 0x04 0x01
+#define IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12                 0x01F0 0x03F4 0x0000 0x05 0x00
+
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0             0x01F4 0x03F8 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPUART2_RTS_B                 0x01F4 0x03F8 0x0000 0x01 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPSPI1_SCK                    0x01F4 0x03F8 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPUART1_DTR_B                 0x01F4 0x03F8 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_CAN1_TX                       0x01F4 0x03F8 0x0000 0x04 0x00
+#define IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13                0x01F4 0x03F8 0x0000 0x05 0x00
+
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0             0x01F8 0x03FC 0x0000 0x00 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_MCLK                     0x01F8 0x03FC 0x041C 0x01 0x01
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_LPSPI1_SOUT                   0x01F8 0x03FC 0x0000 0x02 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_LPUART2_DSR_B                 0x01F8 0x03FC 0x0000 0x03 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_MQS1_RIGHT                    0x01F8 0x03FC 0x0000 0x04 0x00
+#define IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14                0x01F8 0x03FC 0x0000 0x05 0x00
+
+#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_WDOG_ANY                       0x01FC 0x0400 0x0000 0x00 0x00
+#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_FCCU_EOUT1                     0x01FC 0x0400 0x0000 0x01 0x00
+#define IMX95_PAD_WDOG_ANY__AONMIX_TOP_GPIO1_IO_BIT15                 0x01FC 0x0400 0x0000 0x05 0x00
+#endif /* __DTS_IMX95_PINFUNC_H */
diff --git a/dts/upstream/src/arm64/freescale/imx95-power.h b/dts/upstream/src/arm64/freescale/imx95-power.h
new file mode 100644
index 00000000000..0b7f0bc30e1
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx95-power.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ *  Copyright 2024 NXP
+ */
+
+#ifndef __IMX95_POWER_H__
+#define __IMX95_POWER_H__
+
+#define IMX95_PD_ANA		0
+#define IMX95_PD_AON		1
+#define IMX95_PD_BBSM		2
+#define IMX95_PD_CAMERA		3
+#define IMX95_PD_CCMSRCGPC	4
+#define IMX95_PD_A55C0		5
+#define IMX95_PD_A55C1		6
+#define IMX95_PD_A55C2		7
+#define IMX95_PD_A55C3		8
+#define IMX95_PD_A55C4		9
+#define IMX95_PD_A55C5		10
+#define IMX95_PD_A55P		11
+#define IMX95_PD_DDR		12
+#define IMX95_PD_DISPLAY	13
+#define IMX95_PD_GPU		14
+#define IMX95_PD_HSIO_TOP	15
+#define IMX95_PD_HSIO_WAON	16
+#define IMX95_PD_M7		17
+#define IMX95_PD_NETC		18
+#define IMX95_PD_NOC		19
+#define IMX95_PD_NPU		20
+#define IMX95_PD_VPU		21
+#define IMX95_PD_WAKEUP		22
+
+#define IMX95_PERF_ELE		0
+#define IMX95_PERF_M33		1
+#define IMX95_PERF_WAKEUP	2
+#define IMX95_PERF_M7		3
+#define IMX95_PERF_DRAM		4
+#define IMX95_PERF_HSIO		5
+#define IMX95_PERF_NPU		6
+#define IMX95_PERF_NOC		7
+#define IMX95_PERF_A55		8
+#define IMX95_PERF_GPU		9
+#define IMX95_PERF_VPU		10
+#define IMX95_PERF_CAM		11
+#define IMX95_PERF_DISP		12
+
+#endif
diff --git a/dts/upstream/src/arm64/freescale/imx95.dtsi b/dts/upstream/src/arm64/freescale/imx95.dtsi
new file mode 100644
index 00000000000..425272aa5a8
--- /dev/null
+++ b/dts/upstream/src/arm64/freescale/imx95.dtsi
@@ -0,0 +1,1192 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx95-clock.h"
+#include "imx95-pinfunc.h"
+#include "imx95-power.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A55_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l0>;
+		};
+
+		A55_1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l1>;
+		};
+
+		A55_2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l2>;
+		};
+
+		A55_3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l3>;
+		};
+
+		A55_4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l4>;
+		};
+
+		A55_5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			power-domains = <&scmi_perf IMX95_PERF_A55>;
+			power-domain-names = "perf";
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l5>;
+		};
+
+		l2_cache_l0: l2-cache-l0 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l1: l2-cache-l1 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l2: l2-cache-l2 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l3: l2-cache-l3 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l4: l2-cache-l4 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l5: l2-cache-l5 {
+			compatible = "cache";
+			cache-size = <65536>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <3>;
+			cache-unified;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A55_0>;
+				};
+
+				core1 {
+					cpu = <&A55_1>;
+				};
+
+				core2 {
+					cpu = <&A55_2>;
+				};
+
+				core3 {
+					cpu = <&A55_3>;
+				};
+
+				core4 {
+					cpu = <&A55_4>;
+				};
+
+				core5 {
+					cpu = <&A55_5>;
+				};
+			};
+		};
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	sai1_mclk: clock-sai-mclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <0>;
+		clock-output-names = "sai1_mclk";
+	};
+
+	sai2_mclk: clock-sai-mclk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <0>;
+		clock-output-names = "sai2_mclk";
+	};
+
+	sai3_mclk: clock-sai-mclk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <0>;
+		clock-output-names = "sai3_mclk";
+	};
+
+	sai4_mclk: clock-sai-mclk4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <0>;
+		clock-output-names = "sai4_mclk";
+	};
+
+	sai5_mclk: clock-sai-mclk5 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <0>;
+		clock-output-names = "sai5_mclk";
+	};
+
+	osc_24m: clock-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	sram1: sram@204c0000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x204c0000 0x0 0x18000>;
+		ranges = <0x0 0x0 0x204c0000 0x18000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi";
+			mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>;
+			shmem = <&scmi_buf0>, <&scmi_buf1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_perf: protocol@13 {
+				reg = <0x13>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_sensor: protocol@15 {
+				reg = <0x15>;
+				#thermal-sensor-cells = <1>;
+			};
+
+			scmi_iomuxc: protocol@19 {
+				reg = <0x19>;
+			};
+
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	thermal-zones {
+		a55-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&scmi_sensor 1>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48060000 0 0xc0000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		dma-noncoherent;
+		ranges;
+
+		its: msi-controller@48040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0 0x48040000 0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+			dma-noncoherent;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x42000000 0x0 0x800000>;
+			ranges = <0x42000000 0x0 0x42000000 0x8000000>,
+				 <0x28000000 0x0 0x28000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mu7: mailbox@42430000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x42430000 0x10000>;
+				interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@42490000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x42490000 0x10000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm3: pwm@424e0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424e0000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM4>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM5>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM6>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C3>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C4>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI3>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI4>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART3>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART4>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART5>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART6>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART7>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART8>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C5>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C6>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C7>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C8>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI5>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI6>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI7>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI8>,
+					 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			mu8: mailbox@42730000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x42730000 0x10000>;
+				interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0 0x42800000 0 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x42800000 0x0 0x42800000 0x800000>;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX95_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC1>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step= <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX95_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC2>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step= <2>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@428b0000 {
+				compatible = "fsl,imx95-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x428b0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_WAKEUPAXI>,
+					 <&scmi_clk IMX95_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&scmi_clk IMX95_CLK_USDHC3>;
+				assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step= <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43810000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 4 32>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43820000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 104 8>, <&scmi_iomuxc 8 74 18>,
+				      <&scmi_iomuxc 26 42 2>, <&scmi_iomuxc 28 0 4>;
+		};
+
+		gpio4: gpio@43840000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43840000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 46 28>, <&scmi_iomuxc 28 44 2>;
+		};
+
+		gpio5: gpio@43850000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x43850000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+				 <&scmi_clk IMX95_CLK_BUSWAKEUP>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 92 12>, <&scmi_iomuxc 12 36 6>;
+		};
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x44000000 0x0 0x800000>;
+			ranges = <0x44000000 0x0 0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mu1: mailbox@44220000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x44220000 0x10000>;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x1000>;
+				clocks = <&scmi_clk IMX95_CLK_TPM2>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C1>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx95-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPI2C2>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI1>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx95-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPSPI2>,
+					 <&scmi_clk IMX95_CLK_BUSAON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART1>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
+					     "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_LPUART2>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_ADC>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			mu2: mailbox@445b0000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x445b0000 0x1000>;
+				ranges;
+				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#mbox-cells = <2>;
+
+				sram0: sram@445b1000 {
+					compatible = "mmio-sram";
+					reg = <0x445b1000 0x400>;
+					ranges = <0x0 0x445b1000 0x400>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scmi_buf0: scmi-sram-section@0 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x0 0x80>;
+					};
+
+					scmi_buf1: scmi-sram-section@80 {
+						compatible = "arm,scmi-shmem";
+						reg = <0x80 0x80>;
+					};
+				};
+
+			};
+
+			mu3: mailbox@445d0000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x445d0000 0x10000>;
+				interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu4: mailbox@445f0000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x445f0000 0x10000>;
+				interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu6: mailbox@44630000 {
+				compatible = "fsl,imx95-mu";
+				reg = <0x44630000 0x10000>;
+				interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		mailbox@47320000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47350000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47350000 0x0 0x10000>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		/* GPIO1 is under exclusive control of System Manager */
+		gpio1: gpio@47400000 {
+			compatible = "fsl,imx95-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x0 0x47400000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&scmi_clk IMX95_CLK_M33>,
+				 <&scmi_clk IMX95_CLK_M33>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&scmi_iomuxc 0 112 16>;
+			status = "disabled";
+		};
+
+		elemu0: mailbox@47520000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47520000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu1: mailbox@47530000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47530000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu2: mailbox@47540000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47540000 0x0 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu3: mailbox@47550000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47550000 0x0 0x10000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		elemu4: mailbox@47560000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47560000 0x0 0x10000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		elemu5: mailbox@47570000 {
+			compatible = "fsl,imx95-mu-ele";
+			reg = <0x0 0x47570000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		aips4: bus@49000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x0 0x49000000 0x0 0x800000>;
+			ranges = <0x49000000 0x0 0x49000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			smmu: iommu@490d0000 {
+				compatible = "arm,smmu-v3";
+				reg = <0x490d0000 0x100000>;
+				interrupts = <GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 334 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 326 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+				#iommu-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		pcie0: pcie@4c300000 {
+			compatible = "fsl,imx95-pcie";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x60100000 0 0xfe00000>,
+			      <0 0x4c360000 0 0x10000>,
+			      <0 0x4c340000 0 0x2000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
+				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					 <&scmi_clk IMX95_CLK_HSIOPLL>,
+					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			fsl,max-link-speed = <3>;
+			status = "disabled";
+		};
+
+		pcie0_ep: pcie-ep@4c300000 {
+			compatible = "fsl,imx95-pcie-ep";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x4c360000 0 0x1000>,
+			      <0 0x4c320000 0 0x1000>,
+			      <0 0x4c340000 0 0x2000>,
+			      <0 0x4c370000 0 0x10000>,
+			      <0x9 0 1 0>;
+			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					 <&scmi_clk IMX95_CLK_HSIOPLL>,
+					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		pcie1: pcie@4c380000 {
+			compatible = "fsl,imx95-pcie";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <8 0x80100000 0 0xfe00000>,
+			      <0 0x4c3e0000 0 0x10000>,
+			      <0 0x4c3c0000 0 0x2000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
+				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					 <&scmi_clk IMX95_CLK_HSIOPLL>,
+					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			fsl,max-link-speed = <3>;
+			status = "disabled";
+		};
+
+		pcie1_ep: pcie-ep@4c380000 {
+			compatible = "fsl,imx95-pcie-ep";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <0 0x4c3e0000 0 0x1000>,
+			      <0 0x4c3a0000 0 0x1000>,
+			      <0 0x4c3c0000 0 0x2000>,
+			      <0 0x4c3f0000 0 0x10000>,
+			      <0xa 0 1 0>;
+			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL>,
+				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					 <&scmi_clk IMX95_CLK_HSIOPLL>,
+					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-10g-0.dtsi b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-10g-0.dtsi
index dbd2fc3ba79..65f7b5a50eb 100644
--- a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-10g-0.dtsi
+++ b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -32,7 +32,7 @@ fman@1a00000 {
 	mdio@f1000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xf1000 0x1000>;
 
 		pcsphy6: ethernet-phy@0 {
diff --git a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-10g-1.dtsi b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-10g-1.dtsi
index 6fc5d256005..3f70482c98c 100644
--- a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-10g-1.dtsi
+++ b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -32,7 +32,7 @@ fman@1a00000 {
 	mdio@f3000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xf3000 0x1000>;
 
 		pcsphy7: ethernet-phy@0 {
diff --git a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-0.dtsi b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-0.dtsi
index 4e02276fcf9..78841c1f325 100644
--- a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-0.dtsi
+++ b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -31,7 +31,7 @@ fman@1a00000 {
 	mdio@e1000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe1000 0x1000>;
 
 		pcsphy0: ethernet-phy@0 {
diff --git a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-1.dtsi b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-1.dtsi
index 0312fa43fa7..1f43fa66622 100644
--- a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-1.dtsi
+++ b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -31,7 +31,7 @@ fman@1a00000 {
 	mdio@e3000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe3000 0x1000>;
 
 		pcsphy1: ethernet-phy@0 {
diff --git a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-2.dtsi b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-2.dtsi
index af2df07971d..de0aa017701 100644
--- a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-2.dtsi
+++ b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -31,7 +31,7 @@ fman@1a00000 {
 	mdio@e5000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe5000 0x1000>;
 
 		pcsphy2: ethernet-phy@0 {
diff --git a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-3.dtsi b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-3.dtsi
index 4ac98dc8b22..6904aa5d8e5 100644
--- a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-3.dtsi
+++ b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -31,7 +31,7 @@ fman@1a00000 {
 	mdio@e7000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe7000 0x1000>;
 
 		pcsphy3: ethernet-phy@0 {
diff --git a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-4.dtsi b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-4.dtsi
index bd932d8b016..a3d29d47029 100644
--- a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-4.dtsi
+++ b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -31,7 +31,7 @@ fman@1a00000 {
 	mdio@e9000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xe9000 0x1000>;
 
 		pcsphy4: ethernet-phy@0 {
diff --git a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-5.dtsi b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-5.dtsi
index 7de1c5203f3..01b78c0463a 100644
--- a/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-5.dtsi
+++ b/dts/upstream/src/arm64/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -31,7 +31,7 @@ fman@1a00000 {
 	mdio@eb000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xeb000 0x1000>;
 
 		pcsphy5: ethernet-phy@0 {
diff --git a/dts/upstream/src/arm64/freescale/qoriq-fman3-0.dtsi b/dts/upstream/src/arm64/freescale/qoriq-fman3-0.dtsi
index ae1c2abaaf3..b0390b711fe 100644
--- a/dts/upstream/src/arm64/freescale/qoriq-fman3-0.dtsi
+++ b/dts/upstream/src/arm64/freescale/qoriq-fman3-0.dtsi
@@ -67,14 +67,14 @@ fman0: fman@1a00000 {
 	mdio0: mdio@fc000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xfc000 0x1000>;
 	};
 
 	xmdio0: mdio@fd000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		compatible = "fsl,fman-memac-mdio";
 		reg = <0xfd000 0x1000>;
 	};
 };
diff --git a/dts/upstream/src/arm64/freescale/tqma8xx.dtsi b/dts/upstream/src/arm64/freescale/tqma8xx.dtsi
index d98469a7c47..366912bf3d5 100644
--- a/dts/upstream/src/arm64/freescale/tqma8xx.dtsi
+++ b/dts/upstream/src/arm64/freescale/tqma8xx.dtsi
@@ -61,12 +61,16 @@
 
 	flash0: flash@0 {
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <66000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/dts/upstream/src/arm64/hisilicon/hi3660.dtsi b/dts/upstream/src/arm64/hisilicon/hi3660.dtsi
index 7e137a884ae..957a1b41f19 100644
--- a/dts/upstream/src/arm64/hisilicon/hi3660.dtsi
+++ b/dts/upstream/src/arm64/hisilicon/hi3660.dtsi
@@ -1161,7 +1161,7 @@
 		};
 
 		usb3_otg_bc: usb3_otg_bc@ff200000 {
-			compatible = "syscon", "simple-mfd";
+			compatible = "hisilicon,hi3660-usb3-otg-bc", "syscon", "simple-mfd";
 			reg = <0x0 0xff200000 0x0 0x1000>;
 
 			usb_phy: usb-phy {
diff --git a/dts/upstream/src/arm64/intel/socfpga_agilex_socdk.dts b/dts/upstream/src/arm64/intel/socfpga_agilex_socdk.dts
index ad99aefeb18..b31cfa6b802 100644
--- a/dts/upstream/src/arm64/intel/socfpga_agilex_socdk.dts
+++ b/dts/upstream/src/arm64/intel/socfpga_agilex_socdk.dts
@@ -106,8 +106,6 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
diff --git a/dts/upstream/src/arm64/intel/socfpga_n5x_socdk.dts b/dts/upstream/src/arm64/intel/socfpga_n5x_socdk.dts
index 2d70a92c209..7952c7f47cc 100644
--- a/dts/upstream/src/arm64/intel/socfpga_n5x_socdk.dts
+++ b/dts/upstream/src/arm64/intel/socfpga_n5x_socdk.dts
@@ -83,8 +83,6 @@
 &qspi {
 	status = "okay";
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
diff --git a/dts/upstream/src/arm64/marvell/armada-3720-gl-mv1000.dts b/dts/upstream/src/arm64/marvell/armada-3720-gl-mv1000.dts
index 63fbc835216..56930f2ce48 100644
--- a/dts/upstream/src/arm64/marvell/armada-3720-gl-mv1000.dts
+++ b/dts/upstream/src/arm64/marvell/armada-3720-gl-mv1000.dts
@@ -41,7 +41,7 @@
 	keys {
 		compatible = "gpio-keys";
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
@@ -57,17 +57,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		vpn {
+		led-vpn {
 			label = "green:vpn";
 			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "green:wan";
 			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
 		};
 
-		led_power: power {
+		led_power: led-power {
 			label = "green:power";
 			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
 			default-state = "on";
diff --git a/dts/upstream/src/arm64/marvell/cn9130-cf-base.dts b/dts/upstream/src/arm64/marvell/cn9130-cf-base.dts
new file mode 100644
index 00000000000..788a5c302b1
--- /dev/null
+++ b/dts/upstream/src/arm64/marvell/cn9130-cf-base.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Base.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+#include "cn9130-cf.dtsi"
+
+/ {
+	model = "SolidRun CN9130 Clearfog Base";
+	compatible = "solidrun,cn9130-clearfog-base",
+		     "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&cp0_gpio1 31 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+
+	rfkill-m2-gnss {
+		compatible = "rfkill-gpio";
+		label = "m.2 GNSS";
+		radio-type = "gps";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&expander0 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* M.2 is B-keyed, so w-disable is for WWAN */
+	rfkill-m2-wwan {
+		compatible = "rfkill-gpio";
+		label = "m.2 WWAN";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* SRDS #3 - SGMII 1GE */
+&cp0_eth1 {
+	phy = <&phy1>;
+	phys = <&cp0_comphy3 1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&cp0_eth2_phy {
+	/*
+	 * Configure LEDs default behaviour:
+	 * - LED[0]: link/activity: On/blink (green)
+	 * - LED[1]: link is 100/1000Mbps: On (yellow)
+	 * - LED[2]: high impedance (floating)
+	 */
+	marvell,reg-init = <3 16 0xf000 0x0a61>;
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			default-state = "keep";
+		};
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_WAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&cp0_gpio1 {
+	sim-select-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sim-select";
+	};
+};
+
+&cp0_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link/activity: On/blink (green)
+		 * - LED[1]: link is 100/1000Mbps: On (yellow)
+		 * - LED[2]: high impedance (floating)
+		 *
+		 * Configure LEDs electrical polarity
+		 * - on-state: low
+		 * - off-state: high (not hi-z, to avoid residual glow)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a61>,
+				   <3 17 0x003f 0x000a>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&cp0_pinctrl {
+	pinctrl-0 = <&sim_select_pins>;
+	pintrl-names = "default";
+
+	rear_button_pins: cp0-rear-button-pins {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	sim_select_pins: cp0-sim-select-pins {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+};
+
+/*
+ * SRDS #4 - USB 3.0 host on M.2 connector
+ * USB-2.0 Host on Type-A connector
+ */
+&cp0_usb3_1 {
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&expander0 {
+	m2-full-card-power-off-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+
+	m2-reset-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-reset";
+	};
+};
diff --git a/dts/upstream/src/arm64/marvell/cn9130-cf-pro.dts b/dts/upstream/src/arm64/marvell/cn9130-cf-pro.dts
new file mode 100644
index 00000000000..a27fe004286
--- /dev/null
+++ b/dts/upstream/src/arm64/marvell/cn9130-cf-pro.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Pro.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+#include "cn9130-cf.dtsi"
+
+/ {
+	model = "SolidRun CN9130 Clearfog Pro";
+	compatible = "solidrun,cn9130-clearfog-pro",
+		     "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+/* SRDS #3 - SGMII 1GE to L2 switch */
+&cp0_eth1 {
+	phys = <&cp0_comphy3 1>;
+	phy-mode = "sgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&cp0_eth2_phy {
+	/*
+	 * Configure LEDs default behaviour similar to switch ports:
+	 * - LED[0]: link/activity: On/blink (green)
+	 * - LED[1]: link is 100/1000Mbps: On (red)
+	 * - LED[2]: high impedance (floating)
+	 *
+	 * Switch port defaults:
+	 * - LED0: link/activity: On/blink (green)
+	 * - LED1: link is 1000Mbps: On (red)
+	 *
+	 * Identical configuration is impossible with hardware offload.
+	 */
+	marvell,reg-init = <3 16 0xf000 0x0a61>;
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			label = "LED2";
+			default-state = "keep";
+		};
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			label = "LED1";
+			default-state = "keep";
+		};
+	};
+};
+
+&cp0_mdio {
+	ethernet-switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-0 = <&dsa_clk_pins &dsa_pins>;
+		pinctrl-names = "default";
+		reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy = <&switch0phy0>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED12";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED11";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy = <&switch0phy1>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED10";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED9";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy = <&switch0phy2>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED8";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED7";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy = <&switch0phy3>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED6";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED5";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan1";
+				phy = <&switch0phy4>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						label = "LED4";
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_RED>;
+						function = LED_FUNCTION_LAN;
+						label = "LED3";
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&cp0_eth1>;
+				phy-mode = "sgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet-port@6 {
+				reg = <6>;
+				label = "lan6";
+				phy-mode = "rgmii";
+
+				/*
+				 * Because of mdio address conflict the
+				 * external phy is not readable.
+				 * Force a fixed link instead.
+				 */
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+
+			switch0phy1: ethernet-phy@1 {
+				reg = <0x1>;
+				/*
+				 * Indirectly configure default behaviour
+				 * for port lan6 leds behind external phy.
+				 * Internal PHYs are not using page 3,
+				 * therefore writing to it is safe.
+				 */
+				marvell,reg-init = <3 16 0xf000 0x0a61>;
+			};
+
+			switch0phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: ethernet-phy@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+		};
+
+		/*
+		 * There is an external phy on the switch mdio bus.
+		 * Because its mdio address collides with internal phys,
+		 * it is not readable.
+		 *
+		 * mdio-external {
+		 *	compatible = "marvell,mv88e6xxx-mdio-external";
+		 *	#address-cells = <1>;
+		 *	#size-cells = <0>;
+		 *
+		 *	ethernet-phy@1 {
+		 *		reg = <0x1>;
+		 *	};
+		 * };
+		 */
+	};
+};
+
+/* SRDS #4 - miniPCIe (CON2) */
+&cp0_pcie1 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy4 1>;
+	/* dw-pcie inverts internally */
+	reset-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	dsa_clk_pins: cp0-dsa-clk-pins {
+		marvell,pins = "mpp40";
+		marvell,function = "synce1";
+	};
+
+	dsa_pins: cp0-dsa-pins {
+		marvell,pins = "mpp27", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	rear_button_pins: cp0-rear-button-pins {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "spi1";
+	};
+};
+
+&cp0_spi1 {
+	/* add pin for chip-select 1 on mikrobus */
+	pinctrl-0 = <&cp0_spi1_pins &cp0_spi1_cs1_pins>;
+};
+
+/* USB-2.0 Host on Type-A connector */
+&cp0_usb3_1 {
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&expander0 {
+	/* CON2 */
+	pcie1-0-clkreq-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "pcie1.0-clkreq";
+	};
+
+	/* CON2 */
+	pcie1-0-w-disable-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "pcie1.0-w-disable";
+	};
+};
diff --git a/dts/upstream/src/arm64/marvell/cn9130-cf.dtsi b/dts/upstream/src/arm64/marvell/cn9130-cf.dtsi
new file mode 100644
index 00000000000..ad0ab34b660
--- /dev/null
+++ b/dts/upstream/src/arm64/marvell/cn9130-cf.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for common base of SolidRun CN9130 Clearfog Base and Pro.
+ *
+ */
+
+/ {
+	aliases {
+		/* label nics same order as armada 388 clearfog */
+		ethernet0 = &cp0_eth2;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth0;
+		i2c1 = &cp0_i2c1;
+		mmc1 = &cp0_sdhci0;
+	};
+
+	reg_usb3_vbus0: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		los-gpios = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&expander0 15 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+/* SRDS #2 - SFP+ 10GE */
+&cp0_eth0 {
+	managed = "in-band-status";
+	phys = <&cp0_comphy2 0>;
+	phy-mode = "10gbase-r";
+	sfp = <&sfp>;
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	expander0: gpio-expander@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&expander0_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		/* CON3 */
+		pcie2-0-clkreq-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie2.0-clkreq";
+		};
+
+		/* CON3 */
+		pcie2-0-w-disable-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie2.0-w-disable";
+		};
+
+		usb3-ilimit-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "usb3-current-limit";
+		};
+
+		m2-devslp-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "m.2 devslp";
+		};
+	};
+
+	/* The MCP3021 supports standard and fast modes */
+	adc@4c {
+		compatible = "microchip,mcp3021";
+		reg = <0x4c>;
+	};
+
+	carrier_eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+};
+
+&cp0_i2c1 {
+	/*
+	 * Routed to SFP, M.2, mikrobus, and miniPCIe
+	 * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
+	 *  address pins tied low, which takes addresses 0x50 and 0x51.
+	 * Mikrobus doesn't specify beyond an I2C bus being present.
+	 * PCIe uses ARP to assign addresses, or 0x63-0x64.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* SRDS #5 - miniPCIe (CON3) */
+&cp0_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy5 2>;
+	/* dw-pcie inverts internally */
+	reset-gpios = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	cp0_i2c1_pins: cp0-i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+
+	cp0_mmc0_pins: cp0-mmc0-pins {
+		marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58",
+			       "mpp59", "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+
+	mikro_spi_pins: cp0-spi1-cs1-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "spi1";
+	};
+
+	mikro_uart_pins: cp0-uart-pins {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "uart1";
+	};
+
+	expander0_pins: cp0-expander0-pins {
+		marvell,pins = "mpp4";
+		marvell,function = "gpio";
+	};
+};
+
+/* SRDS #0 - SATA on M.2 connector */
+&cp0_sata0 {
+	phys = <&cp0_comphy0 1>;
+	status = "okay";
+
+	/* only port 1 is available */
+	/delete-node/ sata-port@0;
+};
+
+/* microSD */
+&cp0_sdhci0 {
+	pinctrl-0 = <&cp0_mmc0_pins>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	/* CS1 for mikrobus */
+	pinctrl-0 = <&cp0_spi1_pins &mikro_spi_pins>;
+};
+
+/*
+ * SRDS #1 - USB-3.0 Host on Type-A connector
+ * USB-2.0 Host on mPCI-e connector (CON3)
+ */
+&cp0_usb3_0 {
+	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
+	phy-names = "comphy", "utmi";
+	vbus-supply = <&reg_usb3_vbus0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+/* mikrobus uart */
+&cp0_uart0 {
+	pinctrl-0 = <&mikro_uart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/marvell/cn9130-sr-som.dtsi b/dts/upstream/src/arm64/marvell/cn9130-sr-som.dtsi
new file mode 100644
index 00000000000..4676e3488f5
--- /dev/null
+++ b/dts/upstream/src/arm64/marvell/cn9130-sr-som.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "SolidRun CN9130 SoM";
+	compatible = "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		i2c0 = &cp0_i2c0;
+		mmc0 = &ap_sdhci0;
+		rtc0 = &cp0_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* requires assembly of R9307 */
+	vhv: regulator-vhv-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vhv-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&cp0_reg_vhv_pins>;
+		pinctrl-names = "default";
+		gpios = <&cp0_gpio2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ap_pinctrl {
+	ap_mmc0_pins: ap-mmc0-pins {
+		marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5",
+					   "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12";
+		marvell,function = "sdio";
+		/*
+		 * mpp12 is emmc reset, function should be sdio (hw_rst),
+		 * but pinctrl-mvebu does not support this.
+		 *
+		 * From pinctrl-mvebu.h:
+		 * "The name will be used to switch to this setting in DT description, e.g.
+		 * marvell,function = "uart2". subname is only for debugging purposes."
+		 */
+	};
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	pinctrl-0 = <&ap_mmc0_pins>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&v_1_8>;
+	status = "okay";
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* for assembly with phy */
+&cp0_eth2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_eth2_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&cp0_eth2_phy>;
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	som_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+};
+
+&cp0_mdio {
+	pinctrl-0 = <&cp0_mdio_pins>;
+	status = "okay";
+
+	/* assembly option */
+	cp0_eth2_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+	/* max speed limited by a mux */
+	spi-max-frequency = <1800000000>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_eth2_pins: cp0-ge2-rgmii-pins {
+			marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47",
+				       "mpp48", "mpp49", "mpp50", "mpp51",
+				       "mpp52", "mpp53", "mpp54", "mpp55";
+			/* docs call it "ge2", but cp110-pinctrl "ge1" */
+			marvell,function = "ge1";
+		};
+
+		cp0_i2c0_pins: cp0-i2c0-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+
+		cp0_mdio_pins: cp0-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+
+		cp0_spi1_pins: cp0-spi1-pins {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+
+		cp0_reg_vhv_pins: cp0-reg-vhv-pins {
+			marvell,pins = "mpp41";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+/* AP default console */
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/marvell/cn9131-cf-solidwan.dts b/dts/upstream/src/arm64/marvell/cn9131-cf-solidwan.dts
new file mode 100644
index 00000000000..b1ea7dcaed1
--- /dev/null
+++ b/dts/upstream/src/arm64/marvell/cn9131-cf-solidwan.dts
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9130 Clearfog Base.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9130-sr-som.dtsi"
+
+/*
+ * Instantiate the external CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/ {
+	model = "SolidRun CN9131 SolidWAN";
+	compatible = "solidrun,cn9131-solidwan",
+		     "solidrun,cn9130-sr-som", "marvell,cn9130";
+
+	aliases {
+		ethernet0 = &cp1_eth1;
+		ethernet1 = &cp1_eth2;
+		ethernet2 = &cp0_eth1;
+		ethernet3 = &cp0_eth2;
+		ethernet4 = &cp0_eth0;
+		ethernet5 = &cp1_eth0;
+		gpio0 = &ap_gpio;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		gpio5 = &expander0;
+		i2c0 = &cp0_i2c0;
+		i2c1 = &cp0_i2c1;
+		i2c2 = &cp1_i2c1;
+		mmc0 = &ap_sdhci0;
+		mmc1 = &cp0_sdhci0;
+		rtc0 = &cp0_rtc;
+		rtc1 = &carrier_rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_led_pins &cp1_led_pins>;
+
+		/* for sfp-1 (J42) */
+		led-sfp1-activity {
+			label = "sfp1:green";
+			gpios = <&cp0_gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* for sfp-1 (J42) */
+		led-sfp1-link {
+			label = "sfp1:yellow";
+			gpios = <&cp0_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* (J28) */
+		led-sfp0-activity {
+			label = "sfp0:green";
+			gpios = <&cp1_gpio2 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* (J28) */
+		led-sfp0-link {
+			label = "sfp0:yellow";
+			gpios = <&cp1_gpio2 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* Type-A port on J53 */
+	reg_usb_a_vbus0: regulator-usb-a-vbus0 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&cp0_reg_usb_a_vbus0_pins>;
+		pinctrl-names = "default";
+		regulator-name = "vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&cp0_gpio1 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_a_vbus1: regulator-usb-a-vbus1 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&cp0_reg_usb_a_vbus1_pins>;
+		pinctrl-names = "default";
+		regulator-name = "vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&cp0_gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sfp0: sfp-0 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cp0_sfp0_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&cp0_i2c1>;
+		los-gpios = <&cp0_gpio2 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp0_gpio2 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio1 31 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cp1_sfp1_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&cp1_i2c1>;
+		los-gpios = <&cp1_gpio2 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio2 18 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio2 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp1_gpio2 17 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SRDS #2 - SFP+ 10GE */
+&cp0_eth0 {
+	managed = "in-band-status";
+	phy-mode = "10gbase-r";
+	phys = <&cp0_comphy2 0>;
+	sfp = <&sfp0>;
+	status = "okay";
+};
+
+/* SRDS #3 - SGMII 1GE */
+&cp0_eth1 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	/* Without mdio phy access rely on sgmii auto-negotiation. */
+	phys = <&cp0_comphy3 1>;
+	status = "okay";
+};
+
+/* SRDS #1 - SGMII */
+&cp0_eth2 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phy = <&cp0_phy1>;
+	phys = <&cp0_comphy1 2>;
+};
+
+&cp0_gpio1 {
+	pcie0-0-w-disable-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "pcie0.0-w-disable";
+	};
+
+	/* J34 */
+	m2-full-card-power-off-hog {
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+};
+
+&cp0_i2c0 {
+	/* assembly option */
+	fan-controller@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+	};
+
+	expander0: gpio@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+
+		usb-a-vbus0-ilimit-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "vbus0-ilimit";
+		};
+
+		/* duplicate connection, controlled by soc gpio */
+		usb-vbus0-enable-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "vbus0-enable";
+		};
+
+		usb-a-vbus1-ilimit-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "vbus1-ilimit";
+		};
+
+		/* duplicate connection, controlled by soc gpio */
+		usb-vbus1-enable-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "vbus1-enable";
+		};
+	};
+
+	carrier_eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+
+	/* usb-hub@60 */
+
+	/* assembly option */
+	carrier_rtc: rtc@68 {
+		compatible = "st,m41t83";
+		reg = <0x68>;
+		pinctrl-0 = <&cp1_rtc_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&cp1_gpio1>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&cp1_gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cp0_i2c1 {
+	/*
+	 * Routed to SFP.
+	 * Limit to 100kHz for compatibility with SFP modules,
+	 * featuring AT24C01A/02/04 at addresses 0x50/0x51.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cp0_mdio {
+	/*
+	 * SoM + Carrier each have a PHY at address 0.
+	 * Remove the SoM phy node, and skip adding the carrier node.
+	 * SGMII Auto-Negotation is enabled by bootloader for
+	 * autonomous operation without mdio control.
+	 */
+	/delete-node/ ethernet-phy@0;
+
+	/* U17016 */
+	cp0_phy1: ethernet-phy@1 {
+		reg = <1>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link is 1000Mbps: On (yellow)
+		 * - LED[1]: link/activity: On/blink (green)
+		 * - LED[2]: high impedance (floating)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a17>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+/* SRDS #0 - miniPCIe */
+&cp0_pcie0 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy0 0>;
+	status = "okay";
+};
+
+/* SRDS #5 - M.2 B-Key (J34) */
+&cp0_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp0_comphy5 2>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	pinctrl-0 = <&cp0_m2_0_shutdown_pins &cp0_mpcie_rfkill_pins>;
+	pinctrl-names = "default";
+
+	cp0_i2c1_pins: cp0-i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+
+	cp0_led_pins: cp0-led-pins {
+		marvell,pins = "mpp4", "mpp7";
+		marvell,function = "gpio";
+	};
+
+	cp0_m2_0_shutdown_pins: cp0-m2-0-shutdown-pins {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	cp0_mmc0_pins: cp0-mmc0-pins {
+		marvell,pins = "mpp43", "mpp56", "mpp57", "mpp58",
+			       "mpp59", "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+
+	cp0_mpcie_rfkill_pins: cp0-mpcie-rfkill-pins {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	cp0_reg_usb_a_vbus0_pins: cp0-reg-usb-a-vbus0-pins {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	cp0_reg_usb_a_vbus1_pins: cp0-reg-usb-a-vbus1-pins {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	cp0_sfp0_pins: cp0-sfp0-pins {
+		marvell,pins = "mpp31", "mpp32", "mpp33", "mpp34";
+		marvell,function = "gpio";
+	};
+
+	cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "spi1";
+	};
+};
+
+/* microSD */
+&cp0_sdhci0 {
+	pinctrl-0 = <&cp0_mmc0_pins>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	/* add pin for chip-select 1 */
+	pinctrl-0 = <&cp0_spi1_pins &cp0_spi1_cs1_pins>;
+
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+/* USB-2.0 Host to USB-Hub */
+&cp0_usb3_0 {
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SRDS #4 - USB-3.0 Host to USB-Hub */
+&cp0_usb3_1 {
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_utmi1 {
+	status = "disabled";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* SRDS #4 - SFP+ 10GE */
+&cp1_eth0 {
+	managed = "in-band-status";
+	phy-mode = "10gbase-r";
+	phys = <&cp1_comphy4 0>;
+	sfp = <&sfp1>;
+	status = "okay";
+};
+
+/* SRDS #3 - SGMII 1GE */
+&cp1_eth1 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phy = <&cp1_phy0>;
+	phys = <&cp0_comphy3 1>;
+	status = "okay";
+};
+
+/* SRDS #5 - SGMII 1GE */
+&cp1_eth2 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phy = <&cp1_phy1>;
+	phys = <&cp0_comphy5 2>;
+	status = "okay";
+};
+
+&cp1_gpio1 {
+	status = "okay";
+
+	/* J30 */
+	m2-full-card-power-off-hog-0 {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+
+	/* J44 */
+	m2-full-card-power-off-hog-1 {
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-full-card-power-off";
+	};
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_i2c1 {
+	/*
+	 * Routed to SFP.
+	 * Limit to 100kHz for compatibility with SFP modules,
+	 * featuring AT24C01A/02/04 at addresses 0x50/0x51.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&cp1_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cp1_mdio {
+	pinctrl-0 = <&cp1_mdio_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	cp1_phy0: ethernet-phy@0 {
+		reg = <0>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link is 1000Mbps: On (yellow)
+		 * - LED[1]: link/activity: On/blink (green)
+		 * - LED[2]: high impedance (floating)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a17>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+
+	cp1_phy1: ethernet-phy@1 {
+		reg = <1>;
+		/*
+		 * Configure LEDs default behaviour:
+		 * - LED[0]: link is 1000Mbps: On (yellow)
+		 * - LED[1]: link/activity: On/blink (green)
+		 * - LED[2]: high impedance (floating)
+		 */
+		marvell,reg-init = <3 16 0xf000 0x0a17>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+/* SRDS #0 - M.2 (J30) */
+&cp1_pcie0 {
+	num-lanes = <1>;
+	phys = <&cp1_comphy0 0>;
+	status = "okay";
+};
+
+&cp1_rtc {
+	status = "disabled";
+};
+
+/* SRDS #1 - SATA on M.2 (J44) */
+&cp1_sata0 {
+	phys = <&cp1_comphy1 0>;
+	status = "okay";
+
+	/* only port 0 is available */
+	/delete-node/ sata-port@1;
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		pinctrl-0 = <&cp1_m2_1_shutdown_pins &cp1_m2_2_shutdown_pins>;
+		pinctrl-names = "default";
+
+		cp1_i2c1_pins: cp0-i2c1-pins {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+
+		cp1_led_pins: cp1-led-pins {
+			marvell,pins = "mpp54", "mpp55";
+			marvell,function = "gpio";
+		};
+
+		cp1_m2_1_shutdown_pins: cp1-m2-1-shutdown-pins {
+			marvell,pins = "mpp29";
+			marvell,function = "gpio";
+		};
+
+		cp1_m2_2_shutdown_pins: cp1-m2-2-shutdown-pins {
+			marvell,pins = "mpp30";
+			marvell,function = "gpio";
+		};
+
+		cp1_mdio_pins: cp1-mdio-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "ge";
+		};
+
+		cp1_rtc_pins: cp1-rtc-pins {
+			marvell,pins = "mpp12", "mpp13";
+			marvell,function = "gpio";
+		};
+
+		cp1_sfp1_pins: cp1-sfp1-pins {
+			marvell,pins = "mpp33", "mpp34", "mpp49", "mpp50";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+/*
+ * SRDS #2 - USB-3.0 Host to M.2 (J44)
+ * USB-2.0 Host to M.2 (J30)
+ */
+&cp1_usb3_0 {
+	phys = <&cp1_comphy2 0>, <&cp1_utmi0>;
+	phy-names = "comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB-2.0 Host to M.2 (J44) */
+&cp1_usb3_1 {
+	phys = <&cp1_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp1_utmi {
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/marvell/cn9132-clearfog.dts b/dts/upstream/src/arm64/marvell/cn9132-clearfog.dts
new file mode 100644
index 00000000000..0f53745a6fa
--- /dev/null
+++ b/dts/upstream/src/arm64/marvell/cn9132-clearfog.dts
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun CN9132 Clearfog.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "cn9130.dtsi"
+#include "cn9132-sr-cex7.dtsi"
+
+/ {
+	model = "SolidRun CN9132 Clearfog";
+	compatible = "solidrun,cn9132-clearfog",
+		     "solidrun,cn9132-sr-cex7", "marvell,cn9130";
+
+	aliases {
+		ethernet1 = &cp0_eth2;
+		ethernet2 = &cp0_eth0;
+		ethernet3 = &cp2_eth0;
+		ethernet4 = &cp1_eth0;
+		i2c7 = &carrier_mpcie_i2c;
+		i2c8 = &carrier_ptp_i2c;
+		mmc1 = &cp0_sdhci0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_wake0_pins>;
+
+		button-0 {
+			label = "SW2";
+			gpios = <&cp1_gpio2 8 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_batlow_pins &cp2_rsvd4_pins>;
+
+		/* LED11 */
+		led-io-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <0>;
+			default-state = "off";
+			gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED12 */
+		led-io-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			default-state = "off";
+			gpios = <&cp2_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* CON4 W_DISABLE1/W_DISABLE2 */
+	rfkill-m2-wlan {
+		compatible = "rfkill-gpio";
+		label = "m.2 wlan (CON4)";
+		radio-type = "wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_10g_phy_rst_01_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp1_gpio2 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* CON5 W_DISABLE1/W_DISABLE2 */
+	rfkill-m2-wlan {
+		compatible = "rfkill-gpio";
+		label = "m.2 wlan (CON5)";
+		radio-type = "wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_10g_phy_rst_23_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp1_gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* J21 W_DISABLE1 */
+	rfkill-m2-wwan {
+		compatible = "rfkill-gpio";
+		label = "m.2 wwan (J21)";
+		radio-type = "wwan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp2_rsvd3_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* J21 W_DISABLE1 */
+	rfkill-m2-gnss {
+		compatible = "rfkill-gpio";
+		label = "m.2 gnss (J21)";
+		radio-type = "gps";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp2_rsvd8_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp2_gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* J14 W_DISABLE */
+	rfkill-mpcie-wlan {
+		compatible = "rfkill-gpio";
+		label = "mpcie wlan (J14)";
+		radio-type = "wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp2_rsvd2_pins>;
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&com_10g_sfp_i2c0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&com_10g_int0_pins>;
+		mod-def0-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&com_smbus {
+	/* This bus is also routed to STM32 BMC Microcontroller (U2) */
+
+	power-sensor@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		#io-channel-cells = <1>;
+		label = "vdd_12v0";
+		shunt-resistor = <2000>;
+	};
+
+	adc@48 {
+		compatible = "ti,tla2021";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* supplied by chaoskey hardware noise generator circuit */
+		channel@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&cp0_eth_phy0 {
+	/*
+	 * Configure LEDs default behaviour:
+	 * - LED[0]: link is 1000Mbps: On (yellow): 0111
+	 * - LED[1]: link/activity: On/Blink (green): 0001
+	 * - LED[2]: Off (green): 1000
+	 */
+	marvell,reg-init = <3 16 0xf000 0x0817>;
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			/* link */
+			reg = <0>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		led@1 {
+			/* act */
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		led@2 {
+			/* 1000 */
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+/* SRDS #4 - 10GE */
+&cp0_eth0 {
+	phys = <&cp0_comphy4 0>;
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	sfp = <&sfp>;
+	status = "okay";
+};
+
+&cp0_eth2 {
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy5 2>;
+	status = "okay";
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+		pause;
+	};
+};
+
+&cp0_i2c1 {
+	/*
+	 * Both COM and Carrier Board have a PCA9547 i2c mux at 0x77.
+	 * Describe them as a single device merging each child bus.
+	 */
+
+	i2c-mux@77 {
+		i2c@0 {
+			/* Routed to Full PCIe (J4) */
+		};
+
+		i2c@1 {
+			/* Routed to USB Hub (U29) */
+		};
+
+		i2c@2 {
+			/* Routed to M.2 (CON4) */
+		};
+
+		i2c@3 {
+			/* Routed to M.2 (CON5) */
+		};
+
+		i2c@4 {
+			/* Routed to M.2 (J21) */
+		};
+
+		carrier_mpcie_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			/* Routed to mini-PCIe (J14) */
+		};
+
+		carrier_ptp_i2c: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			/* Routed to various optional PTP related components */
+		};
+	};
+};
+
+&cp0_mdio {
+	ethernet-switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sw_phy1: ethernet-phy@1 {
+				reg = <0x11>;
+			};
+
+			sw_phy2: ethernet-phy@2 {
+				reg = <0x12>;
+			};
+
+			sw_phy3: ethernet-phy@3 {
+				reg = <0x13>;
+			};
+
+			sw_phy4: ethernet-phy@4 {
+				reg = <0x14>;
+			};
+		};
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-handle = <&sw_phy1>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-handle = <&sw_phy2>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-handle = <&sw_phy3>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan4";
+				phy-handle = <&sw_phy4>;
+				phy-mode = "internal";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_YELLOW>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&cp0_eth2>;
+				phy-mode = "2500base-x";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
+
+/* SRDS #0,#1,#2,#3 - PCIe */
+&cp0_pcie0 {
+	num-lanes = <4>;
+	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	/*
+	 * configure unused gpios exposed via pin headers:
+	 * - J7-10: PWRBTN
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pwrbtn_pins>;
+};
+
+/* microSD */
+&cp0_sdhci0 {
+	pinctrl-0 = <&cp0_mmc0_pins>, <&cp0_mmc0_cd_pins>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	/* add CS1 */
+	pinctrl-0 = <&cp0_spi1_pins>, <&cp0_spi1_cs1_pins>;
+
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+/* J38 */
+&cp0_uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart2_pins>;
+	status = "okay";
+};
+
+&cp0_utmi {
+	/* M.2 "CON5" swaps D+/D- */
+	swap-dx-lanes = <1>;
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* SRDS #2 - 5GE */
+&cp1_eth0 {
+	phys = <&cp1_comphy2 0>;
+	phy-mode = "5gbase-r";
+	phy = <&cp1_eth_phy0>;
+	managed = "in-band-status";
+	status = "okay";
+};
+
+/* SRDS #0,#1 - PCIe */
+&cp1_pcie0 {
+	num-lanes = <2>;
+	phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	status = "okay";
+};
+
+/* SRDS #4 - PCIe */
+&cp1_pcie1 {
+	num-lanes = <1>;
+	phys = <&cp1_comphy4 1>;
+	status = "okay";
+};
+
+/* SRDS #5 - PCIe */
+&cp1_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp1_comphy5 2>;
+	status = "okay";
+};
+
+&cp1_pinctrl {
+	/*
+	 * configure unused gpios exposed via pin headers:
+	 * - J7-8: RSVD16
+	 * - J7-10: THRM
+	 * - J10-1: WAKE1
+	 * - J10-2: SATA_ACT
+	 * - J10-8: THERMTRIP
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_rsvd16_pins &cp1_sata_act_pins &cp1_thrm_irq_pins>,
+		    <&cp1_thrm_trip_pins &cp1_wake1_pins>;
+};
+
+/* SRDS #3 - SATA */
+&cp1_sata0 {
+	status = "okay";
+
+	/* only port 1 is available */
+	/delete-node/ sata-port@0;
+
+	sata-port@1 {
+		phys = <&cp1_comphy3 1>;
+	};
+};
+
+&cp1_utmi {
+	/* M.2 "CON4" swaps D+/D- */
+	swap-dx-lanes = <0>;
+};
+
+&cp1_xmdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_xmdio_pins>;
+	status = "okay";
+
+	cp1_eth_phy0: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&com_10g_int1_pins>;
+		interrupt-parent = <&cp1_gpio2>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&cp2_ethernet {
+	status =  "okay";
+};
+
+/* SRDS #2 - 5GE */
+&cp2_eth0 {
+	phys = <&cp2_comphy2 0>;
+	phy-mode = "5gbase-r";
+	phy = <&cp2_eth_phy0>;
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&cp2_gpio1 {
+	pinctrl-names= "default";
+	pinctrl-0 = <&cp2_rsvd9_pins>;
+
+	/* J21 */
+	m2-wwan-reset-hog {
+		gpio-hog;
+		gpios = <9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		output-low;
+		line-name = "m2-wwan-reset";
+	};
+};
+
+/* SRDS #0 - PCIe */
+&cp2_pcie0 {
+	num-lanes = <1>;
+	phys = <&cp2_comphy0 0>;
+	status = "okay";
+};
+
+/* SRDS #4 - PCIe */
+&cp2_pcie1 {
+	num-lanes = <1>;
+	phys = <&cp2_comphy4 1>;
+	status = "okay";
+};
+
+/* SRDS #5 - PCIe */
+&cp2_pcie2 {
+	num-lanes = <1>;
+	phys = <&cp2_comphy5 2>;
+	status = "okay";
+};
+
+&cp2_pinctrl {
+	/*
+	 * configure unused gpios exposed via pin headers:
+	 * - J7-1: RSVD10
+	 * - J7-3: RSVD11
+	 * - J7-5: RSVD56
+	 * - J7-6: RSVD7
+	 * - J7-7: RSVD27
+	 * - J10-3: RSVD31
+	 * - J10-5: RSVD5
+	 * - J10-6: RSVD32
+	 * - J10-7: RSVD0
+	 * - J10-9: RSVD1
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_rsvd0_pins &cp2_rsvd1_pins &cp2_rsvd5_pins>,
+		    <&cp2_rsvd7_pins &cp2_rsvd10_pins &cp2_rsvd11_pins>,
+		    <&cp2_rsvd27_pins &cp2_rsvd31_pins &cp2_rsvd32_pins>,
+		    <&cp2_rsvd56_pins>;
+};
+
+/* SRDS #3 - SATA */
+&cp2_sata0 {
+	status = "okay";
+
+	/* only port 1 is available */
+	/delete-node/ sata-port@0;
+
+	sata-port@1 {
+		phys = <&cp2_comphy3 1>;
+	};
+};
+
+&cp2_xmdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_xmdio_pins>;
+	status = "okay";
+
+	cp2_eth_phy0: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&com_10g_int2_pins>;
+		interrupt-parent = <&cp2_gpio2>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/marvell/cn9132-sr-cex7.dtsi b/dts/upstream/src/arm64/marvell/cn9132-sr-cex7.dtsi
new file mode 100644
index 00000000000..afc041c1c44
--- /dev/null
+++ b/dts/upstream/src/arm64/marvell/cn9132-sr-cex7.dtsi
@@ -0,0 +1,712 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Josua Mayer <josua@solid-run.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/*
+ * Instantiate the first external CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/*
+ * Instantiate the second external CP115
+ */
+
+#define CP11X_NAME		cp2
+#define CP11X_BASE		f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f6600000
+#define CP11X_PCIE1_BASE	f6620000
+#define CP11X_PCIE2_BASE	f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/ {
+	model = "SolidRun CN9132 COM Express Type 7 Module";
+	compatible = "solidrun,cn9132-sr-cex7", "marvell,cn9130";
+
+	aliases {
+		ethernet0 = &cp0_eth1;
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		gpio5 = &cp2_gpio1;
+		gpio6 = &cp2_gpio2;
+		i2c0 = &cp0_i2c0;
+		i2c1 = &cp0_i2c1;
+		i2c2 = &com_clkgen_i2c;
+		i2c3 = &com_10g_led_i2c;
+		i2c4 = &com_10g_sfp_i2c0;
+		i2c5 = &com_smbus;
+		i2c6 = &com_fanctrl_i2c;
+		mmc0 = &ap_sdhci0;
+		rtc0 = &cp0_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 51 102 153 204 255>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_fan_pwm_pins &cp0_fan_tacho_pins>;
+		pwms = <&cp0_gpio2 7 40000>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	ap_vhv: regulator-ap-vhv-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "ap-vhv-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&cp0_reg_ap_vhv_pins>;
+		pinctrl-names = "default";
+		gpios = <&cp0_gpio2 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cp_vhv: regulator-cp-vhv-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp-vhv-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&cp0_reg_cp_vhv_pins>;
+		pinctrl-names = "default";
+		gpios = <&cp0_gpio2 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ap_pinctrl {
+	ap_mmc0_pins: ap-mmc0-pins {
+		marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5",
+					   "mpp6", "mpp7", "mpp8", "mpp9", "mpp10", "mpp12";
+		marvell,function = "sdio";
+		/*
+		 * mpp12 is emmc reset, function should be sdio (hw_rst),
+		 * but pinctrl-mvebu does not support this.
+		 *
+		 * From pinctrl-mvebu.h:
+		 * "The name will be used to switch to this setting in DT description, e.g.
+		 * marvell,function = "uart2". subname is only for debugging purposes."
+		 */
+	};
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	pinctrl-0 = <&ap_mmc0_pins>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&v_1_8>;
+	status = "okay";
+};
+
+&ap_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		ap_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&ap_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&ap_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_eth1_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&cp0_eth_phy0>;
+	status = "okay";
+};
+
+&cp0_gpio1 {
+	status = "okay";
+
+	/*
+	 * Tacho signal used as interrupt source by pwm-fan driver.
+	 * Hog IO as input to ensure mvebu-gpio irq driver`s
+	 * irq_set_type can succeed.
+	 */
+	pwm-tacho-irq-hog {
+		gpio-hog;
+		gpios = <26 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		input;
+		line-name = "fan-tacho";
+	};
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	com_eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,spd";
+		reg = <0x53>;
+	};
+};
+
+&cp0_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		com_clkgen_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			/* clock-controller@6b */
+		};
+
+		com_10g_led_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			/* Routed to B2B Connector as I2C_10G_LED_SCL/SDA */
+		};
+
+		com_10g_sfp_i2c0: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* Routed to B2B Connector as I2C_SFP0_CP0_SCL/SDA */
+		};
+
+		com_smbus: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			/* Routed to B2B Connector as SBM_CLK/DAT */
+		};
+
+		com_fanctrl_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			/* fan-controller@2f (assembly option) */
+		};
+	};
+};
+
+&cp0_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_mdio_pins>;
+	status = "okay";
+
+	cp0_eth_phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/* read command supports max. 50MHz */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		com_10g_int0_pins: cp0-10g-int-pins {
+			marvell,pins = "mpp24";
+			marvell,function = "gpio";
+		};
+
+		cp0_eth1_pins: cp0-eth1-pins {
+			marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+				       "mpp4", "mpp5", "mpp6", "mpp7",
+				       "mpp8", "mpp9", "mpp10", "mpp11";
+			/* docs call it "ge1", but cp110-pinctrl "ge0" */
+			marvell,function = "ge0";
+		};
+
+		cp0_fan_pwm_pins: cp0-fan-pwm-pins {
+			marvell,pins = "mpp39";
+			marvell,function = "gpio";
+		};
+
+		cp0_fan_tacho_pins: cp0-fan-tacho-pins {
+			marvell,pins = "mpp26";
+			marvell,function = "gpio";
+		};
+
+		cp0_i2c0_pins: cp0-i2c0-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+
+		cp0_i2c1_pins: cp0-i2c1-pins {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+
+		cp0_mdio_pins: cp0-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+
+		cp0_mmc0_pins: cp0-mmc0-pins {
+			marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59",
+				       "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+
+		cp0_mmc0_cd_pins: cp0-mmc0-cd-pins {
+			marvell,pins = "mpp55";
+			marvell,function = "sdio_cd";
+		};
+
+		cp0_pwrbtn_pins:  cp0-pwrbtn-pins {
+			marvell,pins = "mpp31";
+			marvell,function = "gpio";
+		};
+
+		cp0_reg_ap_vhv_pins: cp0-reg-ap-vhv-pins {
+			marvell,pins = "mpp53";
+			marvell,function = "gpio";
+		};
+
+		cp0_reg_cp_vhv_pins: cp0-reg-cp-vhv-pins {
+			marvell,pins = "mpp49";
+			marvell,function = "gpio";
+		};
+
+		cp0_spi1_pins: cp0-spi1-pins {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+
+		cp0_spi1_cs1_pins: cp0-spi1-cs1-pins {
+			marvell,pins = "mpp12";
+			marvell,function = "spi1";
+		};
+
+		cp0_uart2_pins: cp0-uart2-pins  {
+			marvell,pins = "mpp50", "mpp51";
+			marvell,function = "uart2";
+		};
+	};
+};
+
+&cp0_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		cp0_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cp0_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&cp0_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+/* USB-2.0 Host */
+&cp0_usb3_0 {
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB-2.0 Host */
+&cp0_usb3_1 {
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_rtc {
+	status = "disabled";
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	tpm@0 {
+		reg = <0>;
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		spi-max-frequency = <10000000>;
+		pinctrl-names  = "default";
+		pinctrl-0 = <&cp1_tpm_irq_pins>;
+		interrupt-parent = <&cp1_gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		com_10g_int1_pins: cp1-10g-int-pins {
+			marvell,pins = "mpp50";
+			marvell,function = "gpio";
+		};
+
+		cp1_10g_phy_rst_01_pins: cp1-10g-phy-rst-01-pins {
+			marvell,pins = "mpp43";
+			marvell,function = "gpio";
+		};
+
+		cp1_10g_phy_rst_23_pins: cp1-10g-phy-rst-23-pins {
+			marvell,pins = "mpp42";
+			marvell,function = "gpio";
+		};
+
+		cp1_batlow_pins: cp1-batlow-pins {
+			marvell,pins = "mpp11";
+			marvell,function = "gpio";
+		};
+
+		cp1_rsvd16_pins: cp1-rsvd16-pins {
+			marvell,pins = "mpp29";
+			marvell,function = "gpio";
+		};
+
+		cp1_sata_act_pins: cp1-sata-act-pins {
+			marvell,pins = "mpp39";
+			marvell,function = "gpio";
+		};
+
+		cp1_spi1_pins: cp1-spi1-pins {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+
+		cp1_thrm_irq_pins: cp1-thrm-irq-pins {
+			marvell,pins = "mpp34";
+			marvell,function = "gpio";
+		};
+
+		cp1_thrm_trip_pins: cp1-thrm-trip-pins {
+			marvell,pins = "mpp33";
+			marvell,function = "gpio";
+		};
+
+		cp1_tpm_irq_pins: cp1-tpm-irq-pins {
+			marvell,pins = "mpp17";
+			marvell,function = "gpio";
+		};
+
+		cp1_wake0_pins: cp1-wake0-pins {
+			marvell,pins = "mpp40";
+			marvell,function = "gpio";
+		};
+
+		cp1_wake1_pins: cp1-wake1-pins {
+			marvell,pins = "mpp51";
+			marvell,function = "gpio";
+		};
+
+		cp1_xmdio_pins: cp1-xmdio-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "xg";
+		};
+	};
+};
+
+&cp1_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		cp1_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cp1_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&cp1_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+/* USB-2.0 Host */
+&cp1_usb3_0 {
+	phys = <&cp1_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp1_utmi {
+	status = "okay";
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+&cp2_gpio1 {
+	status = "okay";
+};
+
+&cp2_gpio2 {
+	status = "okay";
+};
+
+&cp2_rtc {
+	status = "disabled";
+};
+
+&cp2_syscon0 {
+	cp2_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		com_10g_int2_pins: cp2-10g-int-pins {
+			marvell,pins = "mpp50";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd0_pins: cp2-rsvd0-pins {
+			marvell,pins = "mpp0";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd1_pins: cp2-rsvd1-pins {
+			marvell,pins = "mpp1";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd2_pins: cp2-rsvd2-pins {
+			marvell,pins = "mpp2";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd3_pins: cp2-rsvd3-pins {
+			marvell,pins = "mpp3";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd4_pins: cp2-rsvd4-pins {
+			marvell,pins = "mpp4";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd5_pins: cp2-rsvd5-pins {
+			marvell,pins = "mpp54";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd7_pins: cp2-rsvd7-pins {
+			marvell,pins = "mpp7";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd8_pins: cp2-rsvd8-pins {
+			marvell,pins = "mpp8";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd9_pins: cp2-rsvd9-pins {
+			marvell,pins = "mpp9";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd10_pins: cp2-rsvd10-pins {
+			marvell,pins = "mpp10";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd11_pins: cp2-rsvd11-pins {
+			marvell,pins = "mpp11";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd27_pins: cp2-rsvd27-pins {
+			marvell,pins = "mpp11";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd31_pins: cp2-rsvd31-pins {
+			marvell,pins = "mpp31";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd32_pins: cp2-rsvd32-pins {
+			marvell,pins = "mpp32";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd55_pins: cp2-rsvd55-pins {
+			marvell,pins = "mpp55";
+			marvell,function = "gpio";
+		};
+
+		cp2_rsvd56_pins: cp2-rsvd56-pins {
+			marvell,pins = "mpp56";
+			marvell,function = "gpio";
+		};
+
+		cp2_xmdio_pins: cp2-xmdio-pins {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "xg";
+		};
+	};
+};
+
+&cp2_thermal_ic {
+	polling-delay = <1000>;
+
+	trips {
+		cp2_active: trip-active {
+			temperature = <40000>;
+			hysteresis = <4000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cp2_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+
+		map1 {
+			trip = <&cp2_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+/* USB-2.0/3.0 Host */
+&cp2_usb3_0 {
+	phys = <&cp2_utmi0>, <&cp2_comphy1 0>;
+	phy-names = "utmi", "comphy";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp2_utmi {
+	status = "okay";
+};
+
+/* AP default console */
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt2712-evb.dts b/dts/upstream/src/arm64/mediatek/mt2712-evb.dts
index 234e3b23d7a..c84c47c1352 100644
--- a/dts/upstream/src/arm64/mediatek/mt2712-evb.dts
+++ b/dts/upstream/src/arm64/mediatek/mt2712-evb.dts
@@ -137,7 +137,7 @@
 				 <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>,
 				 <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>,
 				 <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 		rx_pins {
 			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>,
@@ -151,7 +151,7 @@
 		mdio_pins {
 			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>,
 				 <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			input-enable;
 		};
 	};
diff --git a/dts/upstream/src/arm64/mediatek/mt6795-sony-xperia-m5.dts b/dts/upstream/src/arm64/mediatek/mt6795-sony-xperia-m5.dts
index 7364c727827..91de920c224 100644
--- a/dts/upstream/src/arm64/mediatek/mt6795-sony-xperia-m5.dts
+++ b/dts/upstream/src/arm64/mediatek/mt6795-sony-xperia-m5.dts
@@ -288,25 +288,25 @@
 				 <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-clk {
 			pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-ds {
 			pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
diff --git a/dts/upstream/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts b/dts/upstream/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
index 224bb289660..d12eac9b3ee 100644
--- a/dts/upstream/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/dts/upstream/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -149,9 +149,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7531";
-			reg = <0>;
+			reg = <0x1f>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -329,8 +329,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
-			groups = "emmc";
+			function = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
diff --git a/dts/upstream/src/arm64/mediatek/mt7622-rfb1.dts b/dts/upstream/src/arm64/mediatek/mt7622-rfb1.dts
index 41629769bdc..8c3e2e2578b 100644
--- a/dts/upstream/src/arm64/mediatek/mt7622-rfb1.dts
+++ b/dts/upstream/src/arm64/mediatek/mt7622-rfb1.dts
@@ -268,8 +268,8 @@
 	/* eMMC is shared pin with parallel NAND */
 	emmc_pins_default: emmc-pins-default {
 		mux {
-			function = "emmc", "emmc_rst";
-			groups = "emmc";
+			function = "emmc";
+			groups = "emmc", "emmc_rst";
 		};
 
 		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
diff --git a/dts/upstream/src/arm64/mediatek/mt7981b-cudy-wr3000-v1.dts b/dts/upstream/src/arm64/mediatek/mt7981b-cudy-wr3000-v1.dts
new file mode 100644
index 00000000000..54101cc08a2
--- /dev/null
+++ b/dts/upstream/src/arm64/mediatek/mt7981b-cudy-wr3000-v1.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7981b.dtsi"
+
+/ {
+	compatible = "cudy,wr3000-v1", "mediatek,mt7981b";
+	model = "Cudy WR3000 V1";
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x10000000>;
+		device_type = "memory";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-wps {
+			label = "WPS";
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		key-reset {
+			label = "RESET";
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WLAN_2GHZ;
+			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WLAN_5GHZ;
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WAN_ONLINE;
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt7981b-openwrt-one.dts b/dts/upstream/src/arm64/mediatek/mt7981b-openwrt-one.dts
new file mode 100644
index 00000000000..4f6cbb49128
--- /dev/null
+++ b/dts/upstream/src/arm64/mediatek/mt7981b-openwrt-one.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7981b.dtsi"
+
+/ {
+	compatible = "openwrt,one", "mediatek,mt7981b";
+	model = "OpenWrt One";
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
+	};
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt7981b.dtsi b/dts/upstream/src/arm64/mediatek/mt7981b.dtsi
index 4feff3d1c5f..64aeeb24efa 100644
--- a/dts/upstream/src/arm64/mediatek/mt7981b.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt7981b.dtsi
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/clock/mediatek,mt7981-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt7986-resets.h>
 
 / {
 	compatible = "mediatek,mt7981b";
@@ -62,12 +63,19 @@
 			#clock-cells = <1>;
 		};
 
-		clock-controller@1001b000 {
+		topckgen: clock-controller@1001b000 {
 			compatible = "mediatek,mt7981-topckgen", "syscon";
 			reg = <0 0x1001b000 0 0x1000>;
 			#clock-cells = <1>;
 		};
 
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+		};
+
 		clock-controller@1001e000 {
 			compatible = "mediatek,mt7981-apmixedsys";
 			reg = <0 0x1001e000 0 0x1000>;
@@ -78,20 +86,80 @@
 			compatible = "mediatek,mt7981-pwm";
 			reg = <0 0x10048000 0 0x1000>;
 			clocks = <&infracfg CLK_INFRA_PWM_STA>,
-				<&infracfg CLK_INFRA_PWM_HCK>,
-				<&infracfg CLK_INFRA_PWM1_CK>,
-				<&infracfg CLK_INFRA_PWM2_CK>,
-				<&infracfg CLK_INFRA_PWM3_CK>;
+				 <&infracfg CLK_INFRA_PWM_HCK>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>,
+				 <&infracfg CLK_INFRA_PWM3_CK>;
 			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
 			#pwm-cells = <2>;
 		};
 
+		i2c@11007000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11007000 0 0x1000>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_I2C0_CK>,
+				 <&infracfg CLK_INFRA_AP_DMA_CK>,
+				 <&infracfg CLK_INFRA_I2C_MCK_CK>,
+				 <&infracfg CLK_INFRA_I2C_PCK_CK>;
+			clock-names = "main", "dma", "arb", "pmic";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@11d00000 {
+			compatible = "mediatek,mt7981-pinctrl";
+			reg = <0 0x11d00000 0 0x1000>,
+			      <0 0x11c00000 0 0x1000>,
+			      <0 0x11c10000 0 0x1000>,
+			      <0 0x11d20000 0 0x1000>,
+			      <0 0x11e00000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_rt", "iocfg_rm", "iocfg_rb", "iocfg_lb",
+				    "iocfg_bl", "iocfg_tm", "iocfg_tl", "eint";
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			gpio-ranges = <&pio 0 0 56>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		efuse@11f20000 {
+			compatible = "mediatek,mt7981-efuse", "mediatek,efuse";
+			reg = <0 0x11f20000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		clock-controller@15000000 {
 			compatible = "mediatek,mt7981-ethsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
+
+		wifi@18000000 {
+			compatible = "mediatek,mt7981-wmac";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_NETSYS_MCU_SEL>,
+				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
+			clock-names = "mcu", "ap2conn";
+			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
+			reset-names = "consys";
+		};
 	};
 
 	timer {
diff --git a/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso b/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
index 779dc6782bb..047a8388811 100644
--- a/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
+++ b/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
@@ -9,21 +9,17 @@
 
 / {
 	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-
-	fragment@0 {
-		target-path = "/soc/mmc@11230000";
-		__overlay__ {
-			bus-width = <8>;
-			max-frequency = <200000000>;
-			cap-mmc-highspeed;
-			mmc-hs200-1_8v;
-			mmc-hs400-1_8v;
-			hs400-ds-delay = <0x14014>;
-			non-removable;
-			no-sd;
-			no-sdio;
-			status = "okay";
-		};
-	};
 };
 
+&{/soc/mmc@11230000} {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	hs400-ds-delay = <0x14014>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-mini.dts b/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
new file mode 100644
index 00000000000..e2a2fea7adf
--- /dev/null
+++ b/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Authors: Frank Wunderlich <frank-w@public-files.de>
+ *          Eric Woudstra <ericwouds@gmail.com>
+ *          Tianling Shen <cnsztl@immortalwrt.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	model = "Bananapi BPI-R3 Mini";
+	chassis-type = "embedded";
+	compatible = "bananapi,bpi-r3mini", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dcin: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12vd";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		/*
+		 * The signal is inverted on this board and the PWM driver
+		 * does not support polarity inversion.
+		 */
+		/* cooling level (0, 1, 2) */
+		cooling-levels = <255 96 0>;
+		pwms = <&pwm 0 10000>;
+	};
+
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1.8vd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3vd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	usb_vbus: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&pio 20 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+	};
+
+	en8811_a: regulator-phy1 {
+		compatible = "regulator-fixed";
+		regulator-name = "phy1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 16 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	en8811_b: regulator-phy2 {
+		compatible = "regulator-fixed";
+		regulator-name = "phy2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 17 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset-key {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		map1 {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		map2 {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 0 0>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy0>;
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy1>;
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+};
+
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+
+	/* MAC Address EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+
+		address-width = <8>;
+		pagesize = <8>;
+		size = <256>;
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@14 {
+		reg = <14>;
+		interrupts-extended = <&pio 48 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <20000>;
+		phy-mode = "2500base-x";
+		full-duplex;
+		pause;
+		airoha,pnswap-rx;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 { /* en8811_a_gpio5 */
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_LAN;
+				function-enumerator = <1>;
+				default-state = "keep";
+			};
+			led@1 { /* en8811_a_gpio4 */
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				function-enumerator = <2>;
+				default-state = "keep";
+			};
+		};
+	};
+
+	phy1: ethernet-phy@15 {
+		reg = <15>;
+		interrupts-extended = <&pio 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <20000>;
+		phy-mode = "2500base-x";
+		full-duplex;
+		pause;
+		airoha,pnswap-rx;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 { /* en8811_b_gpio5 */
+				reg = <0>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_WAN;
+				function-enumerator = <1>;
+				default-state = "keep";
+			};
+			led@1 { /* en8811_b_gpio4 */
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				function-enumerator = <2>;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pio {
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c";
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm0";
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	usb_ngff_pins: usb-ngff-pins {
+		ngff-gnss-off-conf {
+			pins = "GPIO_6";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-pe-rst-conf {
+			pins = "GPIO_7";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-wwan-off-conf {
+			pins = "GPIO_8";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-pwr-off-conf {
+			pins = "GPIO_9";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-rst-conf {
+			pins = "GPIO_10";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+		ngff-coex-conf {
+			pins = "SPI1_CS";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <1>;
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_led_pins: wf-led-pins {
+		mux {
+			function = "led";
+			groups = "wifi_led";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+
+		spi-max-frequency = <20000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&ssusb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_ngff_pins>;
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
+
+	led {
+		led-active-low;
+	};
+};
+
diff --git a/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso b/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
index 7b97c5c91bd..24398f8a7da 100644
--- a/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
+++ b/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
@@ -9,46 +9,44 @@
 
 / {
 	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+};
+
+&{/soc/spi@1100a000} {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	spi_nand: flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
 
-	fragment@0 {
-		target-path = "/soc/spi@1100a000";
-		__overlay__ {
+		partitions {
+			compatible = "fixed-partitions";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			spi_nand: flash@0 {
-				compatible = "spi-nand";
-				reg = <0>;
-				spi-max-frequency = <10000000>;
-				spi-tx-buswidth = <4>;
-				spi-rx-buswidth = <4>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "bl2";
-						reg = <0x0 0x100000>;
-						read-only;
-					};
-
-					partition@100000 {
-						label = "reserved";
-						reg = <0x100000 0x280000>;
-					};
-
-					partition@380000 {
-						label = "fip";
-						reg = <0x380000 0x200000>;
-						read-only;
-					};
-
-					partition@580000 {
-						label = "ubi";
-						reg = <0x580000 0x7a80000>;
-					};
-				};
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "reserved";
+				reg = <0x100000 0x280000>;
+			};
+
+			partition@380000 {
+				label = "fip";
+				reg = <0x380000 0x200000>;
+				read-only;
+			};
+
+			partition@580000 {
+				label = "ubi";
+				reg = <0x580000 0x7a80000>;
 			};
 		};
 	};
diff --git a/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso b/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
index e48881be4ed..6a0d529b54a 100644
--- a/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
+++ b/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
@@ -9,54 +9,52 @@
 
 / {
 	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+};
+
+&{/soc/spi@1100a000} {
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-	fragment@0 {
-		target-path = "/soc/spi@1100a000";
-		__overlay__ {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			flash@0 {
-				compatible = "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <10000000>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "bl2";
-						reg = <0x0 0x40000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "u-boot-env";
-						reg = <0x40000 0x40000>;
-					};
-
-					partition@80000 {
-						label = "reserved2";
-						reg = <0x80000 0x80000>;
-					};
-
-					partition@100000 {
-						label = "fip";
-						reg = <0x100000 0x80000>;
-						read-only;
-					};
-
-					partition@180000 {
-						label = "recovery";
-						reg = <0x180000 0xa80000>;
-					};
-
-					partition@c00000 {
-						label = "fit";
-						reg = <0xc00000 0x1400000>;
-					};
-				};
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x40000 0x40000>;
+			};
+
+			partition@80000 {
+				label = "reserved2";
+				reg = <0x80000 0x80000>;
+			};
+
+			partition@100000 {
+				label = "fip";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "recovery";
+				reg = <0x180000 0xa80000>;
+			};
+
+			partition@c00000 {
+				label = "fit";
+				reg = <0xc00000 0x1400000>;
 			};
 		};
 	};
diff --git a/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso b/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
index f623bce075c..d9e01967acc 100644
--- a/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
+++ b/dts/upstream/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
@@ -9,15 +9,11 @@
 
 / {
 	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-
-	fragment@0 {
-		target-path = "/soc/mmc@11230000";
-		__overlay__ {
-			bus-width = <4>;
-			max-frequency = <52000000>;
-			cap-sd-highspeed;
-			status = "okay";
-		};
-	};
 };
 
+&{/soc/mmc@11230000} {
+	bus-width = <4>;
+	max-frequency = <52000000>;
+	cap-sd-highspeed;
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt7988a.dtsi b/dts/upstream/src/arm64/mediatek/mt7988a.dtsi
index bba97de4fb4..aa728331e87 100644
--- a/dts/upstream/src/arm64/mediatek/mt7988a.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt7988a.dtsi
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only OR MIT
 
+#include <dt-bindings/clock/mediatek,mt7988-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
 	compatible = "mediatek,mt7988a";
@@ -78,7 +80,7 @@
 			#interrupt-cells = <3>;
 		};
 
-		clock-controller@10001000 {
+		infracfg: clock-controller@10001000 {
 			compatible = "mediatek,mt7988-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
@@ -103,6 +105,92 @@
 			#clock-cells = <1>;
 		};
 
+		pwm@10048000 {
+			compatible = "mediatek,mt7988-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_66M_PWM_BCK>,
+				 <&infracfg CLK_INFRA_66M_PWM_HCK>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK1>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK2>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK3>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK4>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK5>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK6>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK7>,
+				 <&infracfg CLK_INFRA_66M_PWM_CK8>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5", "pwm6", "pwm7", "pwm8";
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		i2c@11003000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11003000 0 0x1000>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c@11004000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11004000 0 0x1000>,
+			      <0 0x10217100 0 0x80>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c@11005000 {
+			compatible = "mediatek,mt7981-i2c";
+			reg = <0 0x11005000 0 0x1000>,
+			      <0 0x10217180 0 0x80>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+				 <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb@11190000 {
+			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11190000 0 0x2e00>,
+			      <0 0x11193e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_USB_SYS>,
+				 <&infracfg CLK_INFRA_USB_REF>,
+				 <&infracfg CLK_INFRA_66M_USB_HCK>,
+				 <&infracfg CLK_INFRA_133M_USB_HCK>,
+				 <&infracfg CLK_INFRA_USB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+		};
+
+		usb@11200000 {
+			compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_USB_SYS_CK_P1>,
+				 <&infracfg CLK_INFRA_USB_CK_P1>,
+				 <&infracfg CLK_INFRA_66M_USB_HCK_CK_P1>,
+				 <&infracfg CLK_INFRA_133M_USB_HCK_CK_P1>,
+				 <&infracfg CLK_INFRA_USB_XHCI_CK_P1>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+		};
+
 		clock-controller@11f40000 {
 			compatible = "mediatek,mt7988-xfi-pll";
 			reg = <0 0x11f40000 0 0x1000>;
diff --git a/dts/upstream/src/arm64/mediatek/mt8173-elm-hana.dtsi b/dts/upstream/src/arm64/mediatek/mt8173-elm-hana.dtsi
index 90cbbc18a48..8d1cbc92bce 100644
--- a/dts/upstream/src/arm64/mediatek/mt8173-elm-hana.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8173-elm-hana.dtsi
@@ -27,6 +27,15 @@
 		hid-descr-addr = <0x0020>;
 		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
+
+	/* Lenovo Ideapad C330 uses G2Touch touchscreen as a 2nd source touchscreen */
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+		hid-descr-addr = <0x0001>;
+		interrupt-parent = <&pio>;
+		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
 
 &i2c4 {
diff --git a/dts/upstream/src/arm64/mediatek/mt8173-elm.dtsi b/dts/upstream/src/arm64/mediatek/mt8173-elm.dtsi
index 6d962d437e0..b4d85147b77 100644
--- a/dts/upstream/src/arm64/mediatek/mt8173-elm.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8173-elm.dtsi
@@ -1134,12 +1134,6 @@
 		rtc: mt6397rtc {
 			compatible = "mediatek,mt6397-rtc";
 		};
-
-		syscfg_pctl_pmic: syscon@c000 {
-			compatible = "mediatek,mt6397-pctl-pmic-syscfg",
-				     "syscon";
-			reg = <0 0x0000c000 0 0x0108>;
-		};
 	};
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8173-evb.dts b/dts/upstream/src/arm64/mediatek/mt8173-evb.dts
index 3fab21f59d1..bb4671c18e3 100644
--- a/dts/upstream/src/arm64/mediatek/mt8173-evb.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8173-evb.dts
@@ -213,14 +213,14 @@
 				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
 				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins_clk {
 			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
 			bias-pull-down;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 		};
 
 		pins_insert {
@@ -241,13 +241,13 @@
 				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
 				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins_clk {
 			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
 		};
 
@@ -265,13 +265,13 @@
 				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
 				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins_clk {
 			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-evb.dts b/dts/upstream/src/arm64/mediatek/mt8183-evb.dts
index 681deddffc2..f04baea5d6c 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-evb.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-evb.dts
@@ -160,7 +160,6 @@
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -169,7 +168,6 @@
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -178,7 +176,6 @@
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -187,7 +184,6 @@
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -196,7 +192,6 @@
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -205,7 +200,6 @@
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-audio-da7219.dtsi b/dts/upstream/src/arm64/mediatek/mt8183-kukui-audio-da7219.dtsi
index 8b57706ac81..586eee79c73 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -27,7 +27,7 @@
 			dlg,btn-cfg = <50>;
 			dlg,mic-det-thr = <500>;
 			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-det-rate = "32_64";
 			dlg,jack-rem-deb = <1>;
 
 			dlg,a-d-btn-thr = <0xa>;
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-cozmo.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
index 072133fb0f0..f34964afe39 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google cozmo board";
+	chassis-type = "laptop";
 	compatible = "google,cozmo", "mediatek,mt8183";
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
index b595622e7be..72852b76003 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google fennel sku1 board";
+	chassis-type = "convertible";
 	compatible = "google,fennel-sku1", "google,fennel", "mediatek,mt8183";
 
 	pwmleds {
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
index 5a1c39318a6..757d0afd14f 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google fennel sku6 board";
+	chassis-type = "convertible";
 	compatible = "google,fennel-sku6", "google,fennel", "mediatek,mt8183";
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
index 3ea4fdb4011..6641b087e7c 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google fennel sku7 board";
+	chassis-type = "convertible";
 	compatible = "google,fennel-sku7", "google,fennel", "mediatek,mt8183";
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
index 3fc5a6181d7..877256eab26 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google fennel14 sku2 board";
+	chassis-type = "laptop";
 	compatible = "google,fennel-sku2", "google,fennel", "mediatek,mt8183";
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
index 23ad0b91e97..b981dd31a43 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google fennel14 sku0 board";
+	chassis-type = "laptop";
 	compatible = "google,fennel-sku0", "google,fennel", "mediatek,mt8183";
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-kappa.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-kappa.dts
index e5bd9191e42..f3ac9c07422 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-kappa.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-kappa.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google kappa board";
+	chassis-type = "laptop";
 	compatible = "google,kappa", "mediatek,mt8183";
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
index 8fa89db03e6..e8241587949 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
@@ -9,5 +9,6 @@
 
 / {
 	model = "Google kenzo sku17 board";
+	chassis-type = "laptop";
 	compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183";
 };
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
index 4eb2a0d571a..ddb993521bb 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
@@ -19,6 +19,6 @@
 
 &mmc1_pins_uhs {
 	pins-clk {
-		drive-strength = <MTK_DRIVE_6mA>;
+		drive-strength = <6>;
 	};
 };
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
index 6a733361e8a..10c4f920a7d 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
@@ -19,6 +19,6 @@
 
 &mmc1_pins_uhs {
 	pins-clk {
-		drive-strength = <MTK_DRIVE_6mA>;
+		drive-strength = <6>;
 	};
 };
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts
index 6a7ae616512..cce326aec1a 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -17,7 +17,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_pins_wakeup>;
 
-		wobt {
+		event-wobt {
 			label = "Wake on BT";
 			gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
@@ -47,10 +47,8 @@
 	};
 };
 
-&wifi_wakeup {
-	wowlan {
-		gpios = <&pio 113 GPIO_ACTIVE_LOW>;
-	};
+&wifi_wakeup_event {
+	gpios = <&pio 113 GPIO_ACTIVE_LOW>;
 };
 
 &wifi_pwrseq {
@@ -68,16 +66,16 @@
 
 &mmc1_pins_default {
 	pins-cmd-dat {
-		drive-strength = <MTK_DRIVE_6mA>;
+		drive-strength = <6>;
 	};
 	pins-clk {
-		drive-strength = <MTK_DRIVE_6mA>;
+		drive-strength = <6>;
 	};
 };
 
 &mmc1_pins_uhs {
 	pins-clk {
-		drive-strength = <MTK_DRIVE_6mA>;
+		drive-strength = <6>;
 	};
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
index 89208b843b2..928b205a616 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
@@ -9,6 +9,7 @@
 
 / {
 	model = "Google willow board sku0";
+	chassis-type = "laptop";
 	compatible = "google,willow-sku0", "google,willow", "mediatek,mt8183";
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
index c7b20441d05..71307a8052d 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
@@ -9,5 +9,6 @@
 
 / {
 	model = "Google willow board sku1";
+	chassis-type = "laptop";
 	compatible = "google,willow-sku1", "google,willow", "mediatek,mt8183";
 };
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi
index 7592e3b8603..fa4ab4d2899 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -155,21 +155,24 @@
 		vdd18-supply = <&pp1800_mipibrdg>;
 		vdd33-supply = <&vddio_mipibrdg>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-			anx7625_in: endpoint {
-				remote-endpoint = <&dsi_out>;
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
+			port@1 {
+				reg = <1>;
 
-			anx7625_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
 			};
 		};
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui-kodama-sku32.dts b/dts/upstream/src/arm64/mediatek/mt8183-kukui-kodama-sku32.dts
index 7739358008e..5a416143b4a 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui-kodama-sku32.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui-kodama-sku32.dts
@@ -12,6 +12,7 @@
 
 / {
 	model = "MediaTek kodama sku32 board";
+	chassis-type = "tablet";
 	compatible = "google,kodama-sku32", "google,kodama", "mediatek,mt8183";
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-kukui.dtsi b/dts/upstream/src/arm64/mediatek/mt8183-kukui.dtsi
index 100191c6453..6345e969efa 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-kukui.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8183-kukui.dtsi
@@ -152,7 +152,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_pins_wakeup>;
 
-		button-wowlan {
+		wifi_wakeup_event: event-wowlan {
 			label = "Wake on WiFi";
 			gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
@@ -488,7 +488,7 @@
 				<PINMUX_GPIO172__FUNC_TDM_DATA1_2ND>,
 				<PINMUX_GPIO173__FUNC_TDM_DATA2_2ND>,
 				<PINMUX_GPIO10__FUNC_TDM_DATA3>; /*8ch-i2s to it6505*/
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 		};
 	};
 
@@ -502,7 +502,7 @@
 				<PINMUX_GPIO10__FUNC_GPIO10>;
 			input-enable;
 			bias-pull-down;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 		};
 	};
 
@@ -533,7 +533,6 @@
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -542,7 +541,6 @@
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -551,7 +549,6 @@
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			bias-disable;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -560,7 +557,6 @@
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -569,7 +565,6 @@
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			bias-disable;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -578,7 +573,6 @@
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -679,14 +673,14 @@
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			input-enable;
 			mediatek,pull-up-adv = <10>;
 		};
 
 		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			mediatek,pull-down-adv = <10>;
 			input-enable;
 		};
@@ -803,7 +797,6 @@
 		};
 		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
 		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
@@ -822,7 +815,6 @@
 		};
 		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
-			output-enable;
 		};
 		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
diff --git a/dts/upstream/src/arm64/mediatek/mt8183-pumpkin.dts b/dts/upstream/src/arm64/mediatek/mt8183-pumpkin.dts
index 333c516af49..1aa668c3ccf 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183-pumpkin.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8183-pumpkin.dts
@@ -197,7 +197,6 @@
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -206,7 +205,6 @@
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -215,7 +213,6 @@
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -224,7 +221,6 @@
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -233,7 +229,6 @@
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -242,7 +237,6 @@
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
-			mediatek,drive-strength-adv = <00>;
 		};
 	};
 
@@ -356,14 +350,14 @@
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			input-enable;
 			mediatek,pull-up-adv = <10>;
 		};
 
 		pins_clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			mediatek,pull-down-adv = <10>;
 			input-enable;
 		};
diff --git a/dts/upstream/src/arm64/mediatek/mt8183.dtsi b/dts/upstream/src/arm64/mediatek/mt8183.dtsi
index 774ae5d9143..fbf145639b8 100644
--- a/dts/upstream/src/arm64/mediatek/mt8183.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8183.dtsi
@@ -1183,7 +1183,7 @@
 			status = "disabled";
 		};
 
-		thermal: thermal@1100b000 {
+		thermal: thermal-sensor@1100b000 {
 			#thermal-sensor-cells = <1>;
 			compatible = "mediatek,mt8183-thermal";
 			reg = <0 0x1100b000 0 0xc00>;
@@ -2090,61 +2090,129 @@
 			};
 		};
 
-		/* The tzts1 ~ tzts6 don't need to polling */
-		/* The tzts1 ~ tzts6 don't need to thermal throttle */
-
-		tzts1: tzts1 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tzts1: soc-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 1>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+			trips {
+				soc_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		tzts2: tzts2 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tzts2: gpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 2>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+
+			trips {
+				gpu_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		tzts3: tzts3 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tzts3: md1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 3>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+
+			trips {
+				md1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		tzts4: tzts4 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tzts4: cpu-little-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 4>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+
+			trips {
+				cpul_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpul_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		tzts5: tzts5 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tzts5: cpu-big-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 5>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+
+			trips {
+				cpub_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpub_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		tztsABB: tztsABB {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+		tztsABB: tsabb-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
 			thermal-sensors = <&thermal 6>;
 			sustainable-power = <5000>;
-			trips {};
-			cooling-maps {};
+
+			trips {
+				tsabb_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				tsabb_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 };
diff --git a/dts/upstream/src/arm64/mediatek/mt8186-corsola-voltorb-sku589824.dts b/dts/upstream/src/arm64/mediatek/mt8186-corsola-voltorb-sku589824.dts
new file mode 100644
index 00000000000..d16834eec87
--- /dev/null
+++ b/dts/upstream/src/arm64/mediatek/mt8186-corsola-voltorb-sku589824.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-voltorb.dtsi"
+
+/ {
+	model = "Google Voltorb sku589824 board";
+	compatible = "google,voltorb-sku589824", "google,voltorb",
+		     "mediatek,mt8186";
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt8186-corsola-voltorb-sku589825.dts b/dts/upstream/src/arm64/mediatek/mt8186-corsola-voltorb-sku589825.dts
new file mode 100644
index 00000000000..45e57f7706c
--- /dev/null
+++ b/dts/upstream/src/arm64/mediatek/mt8186-corsola-voltorb-sku589825.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-voltorb.dtsi"
+
+/ {
+	model = "Google Voltorb sku589825 board";
+	compatible = "google,voltorb-sku589825", "google,voltorb",
+		     "mediatek,mt8186";
+};
+
+&i2c1 {
+	touchscreen@10 {
+		compatible = "elan,ekth6915";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+	};
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt8186-corsola-voltorb.dtsi b/dts/upstream/src/arm64/mediatek/mt8186-corsola-voltorb.dtsi
new file mode 100644
index 00000000000..52ec58128d5
--- /dev/null
+++ b/dts/upstream/src/arm64/mediatek/mt8186-corsola-voltorb.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	chassis-type = "laptop";
+
+	max98360a: max98360a {
+		compatible = "maxim,max98360a";
+		sdmode-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&cpu6 {
+	proc-supply = <&mt6319_buck1>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6319_buck1>;
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&keyboard_controller {
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&mt6366_vproc11_reg {
+	status = "disabled";
+};
+
+&cluster1_opp_14 {
+	opp-hz = /bits/ 64 <2050000000>;
+	opp-microvolt = <1118750>;
+};
+
+&cluster1_opp_15 {
+	opp-hz = /bits/ 64 <2200000000>;
+};
+
+&rt1019p{
+	status = "disabled";
+};
+
+&sound {
+	compatible = "mediatek,mt8186-mt6366-rt5682s-max98360-sound";
+	status = "okay";
+
+	spk-hdmi-playback-dai-link {
+		codec {
+			sound-dai = <&it6505dptx>, <&max98360a>;
+		};
+	};
+};
+
+&spmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spmi_pins>;
+	#address-cells = <2>;
+	#size-cells = <0>;
+	status = "okay";
+
+	pmic@6 {
+		compatible = "mediatek,mt6319-regulator", "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6319_buck1: vbuck1 {
+					regulator-name = "ppvar_dvdd_proc_bc_mt6319";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1193750>;
+					regulator-enable-ramp-delay = <256>;
+					regulator-allowed-modes = <0 1 2>;
+					regulator-always-on;
+			};
+		};
+	};
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt8186-corsola.dtsi b/dts/upstream/src/arm64/mediatek/mt8186-corsola.dtsi
index 1807e9d6cb0..afdab5724ea 100644
--- a/dts/upstream/src/arm64/mediatek/mt8186-corsola.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8186-corsola.dtsi
@@ -42,7 +42,7 @@
 		default-brightness-level = <576>;
 	};
 
-	bt-sco-codec {
+	bt-sco {
 		compatible = "linux,bt-sco";
 		#sound-dai-cells = <0>;
 	};
@@ -223,12 +223,44 @@
 		mediatek,adsp = <&adsp>;
 		mediatek,platform = <&afe>;
 
-		playback-codecs {
-			sound-dai = <&it6505dptx>, <&rt1019p>;
+		audio-routing =
+			"Headphone", "HPOL",
+			"Headphone", "HPOR",
+			"IN1P", "Headset Mic",
+			"Speakers", "Speaker",
+			"HDMI1", "TX";
+
+		hs-playback-dai-link {
+			link-name = "I2S0";
+			dai-format = "i2s";
+			mediatek,clk-provider = "cpu";
+			codec {
+				sound-dai = <&rt5682s 0>;
+			};
+		};
+
+		hs-capture-dai-link {
+			link-name = "I2S1";
+			dai-format = "i2s";
+			mediatek,clk-provider = "cpu";
+			codec {
+				sound-dai = <&rt5682s 0>;
+			};
 		};
 
-		headset-codec {
-			sound-dai = <&rt5682s 0>;
+		spk-share-dai-link {
+			link-name = "I2S2";
+			mediatek,clk-provider = "cpu";
+		};
+
+		spk-hdmi-playback-dai-link {
+			link-name = "I2S3";
+			dai-format = "i2s";
+			mediatek,clk-provider = "cpu";
+			/* RT1019P and IT6505 connected to the same I2S line */
+			codec {
+				sound-dai = <&it6505dptx>, <&rt1019p>;
+			};
 		};
 	};
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8188.dtsi b/dts/upstream/src/arm64/mediatek/mt8188.dtsi
index b4315c9214d..29d012d28ed 100644
--- a/dts/upstream/src/arm64/mediatek/mt8188.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8188.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/mediatek,mt8188-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mailbox/mediatek,mt8188-gce.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
 #include <dt-bindings/power/mediatek,mt8188-power.h>
@@ -293,6 +294,112 @@
 		clock-output-names = "clk32k";
 	};
 
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-390000000 {
+			opp-hz = /bits/ 64 <390000000>;
+			opp-microvolt = <575000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-431000000 {
+			opp-hz = /bits/ 64 <431000000>;
+			opp-microvolt = <587500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-473000000 {
+			opp-hz = /bits/ 64 <473000000>;
+			opp-microvolt = <600000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-515000000 {
+			opp-hz = /bits/ 64 <515000000>;
+			opp-microvolt = <612500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-556000000 {
+			opp-hz = /bits/ 64 <556000000>;
+			opp-microvolt = <625000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <637500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-640000000 {
+			opp-hz = /bits/ 64 <640000000>;
+			opp-microvolt = <650000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-670000000 {
+			opp-hz = /bits/ 64 <670000000>;
+			opp-microvolt = <662500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <675000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-730000000 {
+			opp-hz = /bits/ 64 <730000000>;
+			opp-microvolt = <687500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-760000000 {
+			opp-hz = /bits/ 64 <760000000>;
+			opp-microvolt = <700000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-790000000 {
+			opp-hz = /bits/ 64 <790000000>;
+			opp-microvolt = <712500>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-835000000 {
+			opp-hz = /bits/ 64 <835000000>;
+			opp-microvolt = <731250>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-880000000 {
+			opp-hz = /bits/ 64 <880000000>;
+			opp-microvolt = <750000>;
+			opp-supported-hw = <0xff>;
+		};
+		opp-915000000 {
+			opp-hz = /bits/ 64 <915000000>;
+			opp-microvolt = <775000>;
+			opp-supported-hw = <0x8f>;
+		};
+		opp-915000000-5 {
+			opp-hz = /bits/ 64 <915000000>;
+			opp-microvolt = <762500>;
+			opp-supported-hw = <0x30>;
+		};
+		opp-915000000-6 {
+			opp-hz = /bits/ 64 <915000000>;
+			opp-microvolt = <750000>;
+			opp-supported-hw = <0x70>;
+		};
+		opp-950000000 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <800000>;
+			opp-supported-hw = <0x8f>;
+		};
+		opp-950000000-5 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <775000>;
+			opp-supported-hw = <0x30>;
+		};
+		opp-950000000-6 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <750000>;
+			opp-supported-hw = <0x70>;
+		};
+	};
+
 	pmu-a55 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupt-parent = <&gic>;
@@ -383,6 +490,329 @@
 			#interrupt-cells = <2>;
 		};
 
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8188-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8188-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				mfg0: power-domain@MT8188_POWER_DOMAIN_MFG0 {
+					reg = <MT8188_POWER_DOMAIN_MFG0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8188_POWER_DOMAIN_MFG1 {
+						reg = <MT8188_POWER_DOMAIN_MFG1>;
+						clocks = <&topckgen CLK_APMIXED_MFGPLL>,
+							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
+						clock-names = "mfg", "alt";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8188_POWER_DOMAIN_MFG2 {
+							reg = <MT8188_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_MFG3 {
+							reg = <MT8188_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_MFG4 {
+							reg = <MT8188_POWER_DOMAIN_MFG4>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_VPPSYS0 {
+					reg = <MT8188_POWER_DOMAIN_VPPSYS0>;
+					clocks = <&topckgen CLK_TOP_VPP>,
+						 <&topckgen CLK_TOP_CAM>,
+						 <&topckgen CLK_TOP_CCU>,
+						 <&topckgen CLK_TOP_IMG>,
+						 <&topckgen CLK_TOP_VENC>,
+						 <&topckgen CLK_TOP_VDEC>,
+						 <&topckgen CLK_TOP_WPE_VPP>,
+						 <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VPP0>,
+						 <&topckgen CLK_TOP_CFGREG_F26M_VPP0>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS_CORE1_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_INFRA_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_CAMSYS_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_SMI_REORDER_MMSRAM>,
+						 <&vppsys0 CLK_VPP0_SMI_IOMMU>,
+						 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_EMI0_EMI1>,
+						 <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>,
+						 <&vppsys0 CLK_VPP0_SMI_RSI>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+						 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_WPESYS>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+					clock-names = "top", "cam", "ccu", "img", "venc",
+						      "vdec", "wpe", "cfgck", "cfgxo",
+						      "ss-sram-cmn", "ss-sram-v0l0", "ss-sram-v0l1",
+						      "ss-sram-ve0", "ss-sram-ve1", "ss-sram-ifa",
+						      "ss-sram-cam", "ss-sram-v1l5", "ss-sram-v1l6",
+						      "ss-sram-rdr", "ss-iommu", "ss-imgcam",
+						      "ss-emi", "ss-subcmn-rdr", "ss-rsi",
+						      "ss-cmn-l4", "ss-vdec1", "ss-wpe",
+						      "ss-cvdo-ve1";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8188_POWER_DOMAIN_VDOSYS0 {
+						reg = <MT8188_POWER_DOMAIN_VDOSYS0>;
+						clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VDO0>,
+							 <&topckgen CLK_TOP_CFGREG_F26M_VDO0>,
+							 <&vdosys0 CLK_VDO0_SMI_GALS>,
+							 <&vdosys0 CLK_VDO0_SMI_COMMON>,
+							 <&vdosys0 CLK_VDO0_SMI_EMI>,
+							 <&vdosys0 CLK_VDO0_SMI_IOMMU>,
+							 <&vdosys0 CLK_VDO0_SMI_LARB>,
+							 <&vdosys0 CLK_VDO0_SMI_RSI>,
+							 <&vdosys0 CLK_VDO0_APB_BUS>;
+						clock-names = "cfgck", "cfgxo", "ss-gals",
+							      "ss-cmn", "ss-emi", "ss-iommu",
+							      "ss-larb", "ss-rsi", "ss-bus";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8188_POWER_DOMAIN_VPPSYS1 {
+							reg = <MT8188_POWER_DOMAIN_VPPSYS1>;
+							clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VPP1>,
+								 <&topckgen CLK_TOP_CFGREG_F26M_VPP1>,
+								 <&vppsys1 CLK_VPP1_GALS5>,
+								 <&vppsys1 CLK_VPP1_GALS6>,
+								 <&vppsys1 CLK_VPP1_LARB5>,
+								 <&vppsys1 CLK_VPP1_LARB6>;
+							clock-names = "cfgck", "cfgxo",
+								      "ss-vpp1-g5", "ss-vpp1-g6",
+								      "ss-vpp1-l5", "ss-vpp1-l6";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_VDEC1 {
+							reg = <MT8188_POWER_DOMAIN_VDEC1>;
+							clocks = <&vdecsys CLK_VDEC2_LARB1>;
+							clock-names = "ss-vdec";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_VDEC0 {
+							reg = <MT8188_POWER_DOMAIN_VDEC0>;
+							clocks = <&vdecsys_soc CLK_VDEC1_SOC_LARB1>;
+							clock-names = "ss-vdec";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						cam_vcore: power-domain@MT8188_POWER_DOMAIN_CAM_VCORE {
+							reg = <MT8188_POWER_DOMAIN_CAM_VCORE>;
+							clocks = <&topckgen CLK_TOP_CAM>,
+								 <&topckgen CLK_TOP_CCU>,
+								 <&topckgen CLK_TOP_CCU_AHB>,
+								 <&topckgen CLK_TOP_CFGREG_CLOCK_ISP_AXI_GALS>;
+							clock-names = "cam", "ccu", "bus", "cfgck";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8188_POWER_DOMAIN_CAM_MAIN {
+								reg = <MT8188_POWER_DOMAIN_CAM_MAIN>;
+								clocks = <&camsys CLK_CAM_MAIN_LARB13>,
+									 <&camsys CLK_CAM_MAIN_LARB14>,
+									 <&camsys CLK_CAM_MAIN_CAM2MM0_GALS>,
+									 <&camsys CLK_CAM_MAIN_CAM2MM1_GALS>,
+									 <&camsys CLK_CAM_MAIN_CAM2SYS_GALS>;
+								clock-names= "ss-cam-l13", "ss-cam-l14",
+									     "ss-cam-mm0", "ss-cam-mm1",
+									     "ss-camsys";
+								mediatek,infracfg = <&infracfg_ao>;
+								#address-cells = <1>;
+								#size-cells = <0>;
+								#power-domain-cells = <1>;
+
+								power-domain@MT8188_POWER_DOMAIN_CAM_SUBB {
+									reg = <MT8188_POWER_DOMAIN_CAM_SUBB>;
+									clocks = <&camsys CLK_CAM_MAIN_CAM_SUBB>,
+										 <&camsys_rawb CLK_CAM_RAWB_LARBX>,
+										 <&camsys_yuvb CLK_CAM_YUVB_LARBX>;
+									clock-names = "ss-camb-sub",
+										      "ss-camb-raw",
+										      "ss-camb-yuv";
+									#power-domain-cells = <0>;
+								};
+
+								power-domain@MT8188_POWER_DOMAIN_CAM_SUBA {
+									reg =<MT8188_POWER_DOMAIN_CAM_SUBA>;
+									clocks = <&camsys CLK_CAM_MAIN_CAM_SUBA>,
+										 <&camsys_rawa CLK_CAM_RAWA_LARBX>,
+										 <&camsys_yuva CLK_CAM_YUVA_LARBX>;
+									clock-names = "ss-cama-sub",
+										      "ss-cama-raw",
+										      "ss-cama-yuv";
+									#power-domain-cells = <0>;
+								};
+							};
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_VDOSYS1 {
+							reg = <MT8188_POWER_DOMAIN_VDOSYS1>;
+							clocks = <&topckgen CLK_TOP_CFGREG_CLOCK_EN_VDO1>,
+								 <&topckgen CLK_TOP_CFGREG_F26M_VDO1>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB2>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB3>,
+								 <&vdosys1 CLK_VDO1_GALS>;
+							clock-names = "cfgck", "cfgxo", "ss-larb2",
+								      "ss-larb3", "ss-gals";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8188_POWER_DOMAIN_HDMI_TX {
+								reg = <MT8188_POWER_DOMAIN_HDMI_TX>;
+								clocks = <&topckgen CLK_TOP_HDMI_APB>,
+									 <&topckgen CLK_TOP_HDCP_24M>;
+								clock-names = "bus", "hdcp";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8188_POWER_DOMAIN_DP_TX {
+								reg = <MT8188_POWER_DOMAIN_DP_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8188_POWER_DOMAIN_EDP_TX {
+								reg = <MT8188_POWER_DOMAIN_EDP_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_VENC {
+							reg = <MT8188_POWER_DOMAIN_VENC>;
+							clocks = <&vencsys CLK_VENC1_LARB>,
+								 <&vencsys CLK_VENC1_VENC>,
+								 <&vencsys CLK_VENC1_GALS>,
+								 <&vencsys CLK_VENC1_GALS_SRAM>;
+							clock-names = "ss-ve1-larb", "ss-ve1-core",
+								      "ss-ve1-gals", "ss-ve1-sram";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_WPE {
+							reg = <MT8188_POWER_DOMAIN_WPE>;
+							clocks = <&wpesys CLK_WPE_TOP_SMI_LARB7>,
+								 <&wpesys CLK_WPE_TOP_SMI_LARB7_PCLK_EN>;
+							clock-names = "ss-wpe-l7", "ss-wpe-l7pce";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_PEXTP_MAC_P0 {
+					reg = <MT8188_POWER_DOMAIN_PEXTP_MAC_P0>;
+					mediatek,infracfg = <&infracfg_ao>;
+					clocks = <&pericfg_ao CLK_PERI_AO_PCIE_P0_FMEM>;
+					clock-names = "ss-pextp-fmem";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_CSIRX_TOP {
+					reg = <MT8188_POWER_DOMAIN_CSIRX_TOP>;
+					clocks = <&topckgen CLK_TOP_SENINF>,
+						 <&topckgen CLK_TOP_SENINF1>;
+					clock-names = "seninf0", "seninf1";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_PEXTP_PHY_TOP {
+					reg = <MT8188_POWER_DOMAIN_PEXTP_PHY_TOP>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_ADSP_AO {
+					reg = <MT8188_POWER_DOMAIN_ADSP_AO>;
+					clocks = <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+						 <&topckgen CLK_TOP_ADSP>;
+					clock-names = "bus", "main";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8188_POWER_DOMAIN_ADSP_INFRA {
+						reg = <MT8188_POWER_DOMAIN_ADSP_INFRA>;
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8188_POWER_DOMAIN_AUDIO_ASRC {
+							reg = <MT8188_POWER_DOMAIN_AUDIO_ASRC>;
+							clocks = <&topckgen CLK_TOP_ASM_H>;
+							clock-names = "asm";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_AUDIO {
+							reg = <MT8188_POWER_DOMAIN_AUDIO>;
+							clocks = <&topckgen CLK_TOP_A1SYS_HP>,
+								 <&topckgen CLK_TOP_AUD_INTBUS>,
+								 <&adsp_audio26m CLK_AUDIODSP_AUDIO26M>;
+							clock-names = "a1sys", "intbus", "adspck";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8188_POWER_DOMAIN_ADSP {
+							reg = <MT8188_POWER_DOMAIN_ADSP>;
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8188_POWER_DOMAIN_ETHER {
+					reg = <MT8188_POWER_DOMAIN_ETHER>;
+					clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+					clock-names = "ethermac";
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+
 		watchdog: watchdog@10007000 {
 			compatible = "mediatek,mt8188-wdt";
 			reg = <0 0x10007000 0 0x100>;
@@ -413,6 +843,22 @@
 			clock-names = "spi", "wrap";
 		};
 
+		gce0: mailbox@10320000 {
+			compatible = "mediatek,mt8188-gce";
+			reg = <0 0x10320000 0 0x4000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+		};
+
+		gce1: mailbox@10330000 {
+			compatible = "mediatek,mt8188-gce";
+			reg = <0 0x10330000 0 0x4000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>;
+		};
+
 		scp: scp@10500000 {
 			compatible = "mediatek,mt8188-scp";
 			reg = <0 0x10500000 0 0x100000>,
@@ -827,6 +1273,23 @@
 			#clock-cells = <1>;
 		};
 
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8188-mali", "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+
+			clocks = <&mfgcfg CLK_MFGCFG_BG3D>;
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_MFG2>,
+					<&spm MT8188_POWER_DOMAIN_MFG3>,
+					<&spm MT8188_POWER_DOMAIN_MFG4>;
+			power-domain-names = "core0", "core1", "core2";
+			status = "disabled";
+		};
+
 		mfgcfg: clock-controller@13fbf000 {
 			compatible = "mediatek,mt8188-mfgcfg";
 			reg = <0 0x13fbf000 0 0x1000>;
@@ -952,5 +1415,22 @@
 			reg = <0 0x1a000000 0 0x1000>;
 			#clock-cells = <1>;
 		};
+
+		vdosys0: syscon@1c01d000 {
+			compatible = "mediatek,mt8188-vdosys0", "syscon";
+			reg = <0 0x1c01d000 0 0x1000>;
+			#clock-cells = <1>;
+			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xd000 0x1000>;
+		};
+
+		vdosys1: syscon@1c100000 {
+			compatible = "mediatek,mt8188-vdosys1", "syscon";
+			reg = <0 0x1c100000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce0 1 CMDQ_THR_PRIO_4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0 0x1000>;
+		};
 	};
 };
diff --git a/dts/upstream/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts b/dts/upstream/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts
index fd2cb8765a1..ac2673e56fb 100644
--- a/dts/upstream/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8192-asurada-hayato-r1.dts
@@ -7,6 +7,7 @@
 
 / {
 	model = "Google Hayato rev1";
+	chassis-type = "convertible";
 	compatible = "google,hayato-rev1", "google,hayato", "mediatek,mt8192";
 };
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8192-asurada-hayato-r5-sku2.dts b/dts/upstream/src/arm64/mediatek/mt8192-asurada-hayato-r5-sku2.dts
index 3127ee5f617..cd86ad9ba28 100644
--- a/dts/upstream/src/arm64/mediatek/mt8192-asurada-hayato-r5-sku2.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8192-asurada-hayato-r5-sku2.dts
@@ -7,6 +7,7 @@
 
 / {
 	model = "Google Hayato rev5";
+	chassis-type = "convertible";
 	compatible = "google,hayato-rev5-sku2", "google,hayato-sku2",
 		     "google,hayato", "mediatek,mt8192";
 };
diff --git a/dts/upstream/src/arm64/mediatek/mt8192-asurada-spherion-r0.dts b/dts/upstream/src/arm64/mediatek/mt8192-asurada-spherion-r0.dts
index bc88866ab2f..29aa87e9388 100644
--- a/dts/upstream/src/arm64/mediatek/mt8192-asurada-spherion-r0.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8192-asurada-spherion-r0.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "Google Spherion (rev0 - 3)";
+	chassis-type = "laptop";
 	compatible = "google,spherion-rev3", "google,spherion-rev2",
 		     "google,spherion-rev1", "google,spherion-rev0",
 		     "google,spherion", "mediatek,mt8192";
diff --git a/dts/upstream/src/arm64/mediatek/mt8192-asurada-spherion-r4.dts b/dts/upstream/src/arm64/mediatek/mt8192-asurada-spherion-r4.dts
index 0039158c9e6..5e9e598bab9 100644
--- a/dts/upstream/src/arm64/mediatek/mt8192-asurada-spherion-r4.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8192-asurada-spherion-r4.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "Google Spherion (rev4)";
+	chassis-type = "laptop";
 	compatible = "google,spherion-rev4", "google,spherion",
 		     "mediatek,mt8192";
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8192-asurada.dtsi b/dts/upstream/src/arm64/mediatek/mt8192-asurada.dtsi
index 7a704246678..08d71ddf366 100644
--- a/dts/upstream/src/arm64/mediatek/mt8192-asurada.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8192-asurada.dtsi
@@ -147,6 +147,7 @@
 		regulator-boot-on;
 		gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&pp3300_g>;
+		off-on-delay-us = <500000>;
 	};
 
 	/* separately switched 3.3V power rail */
diff --git a/dts/upstream/src/arm64/mediatek/mt8192.dtsi b/dts/upstream/src/arm64/mediatek/mt8192.dtsi
index 84cbdf6e9eb..47dea10dd3b 100644
--- a/dts/upstream/src/arm64/mediatek/mt8192.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8192.dtsi
@@ -2234,7 +2234,7 @@
 			};
 		};
 
-		gpu0-thermal {
+		gpu-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <250>;
 			thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
diff --git a/dts/upstream/src/arm64/mediatek/mt8195-cherry-dojo-r1.dts b/dts/upstream/src/arm64/mediatek/mt8195-cherry-dojo-r1.dts
new file mode 100644
index 00000000000..88123842c81
--- /dev/null
+++ b/dts/upstream/src/arm64/mediatek/mt8195-cherry-dojo-r1.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+	model = "HP Dojo (sku 1, 3, 5, 7) board";
+	chassis-type = "convertible";
+	compatible = "google,dojo-sku7", "google,dojo-sku5",
+		     "google,dojo-sku3", "google,dojo-sku1",
+		     "google,dojo", "mediatek,mt8195";
+};
+
+&audio_codec {
+	compatible = "realtek,rt5682s";
+	realtek,amic-delay-ms = <250>;
+};
+
+&i2c2 {
+	spk_r_amp: amplifier@38 {
+		compatible = "maxim,max98390";
+		reg = <0x38>;
+		reset-gpios = <&pio 100 GPIO_ACTIVE_LOW>;
+		sound-name-prefix = "Right";
+		#sound-dai-cells = <0>;
+	};
+
+	spk_l_amp: amplifier@39 {
+		compatible = "maxim,max98390";
+		reg = <0x39>;
+		sound-name-prefix = "Left";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c4 {
+	touchscreen@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		hid-descr-addr = <0x0001>;
+		interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		post-power-on-delay-ms = <10>;
+		vdd-supply = <&pp3300_s3>;
+	};
+};
+
+&keyboard_controller {
+	linux,keymap = <
+		CROS_STD_MAIN_KEYMAP
+
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_KBDILLUMTOGGLE)
+		MATRIX_KEY(0x01, 0x09, KEY_PLAYPAUSE)
+		MATRIX_KEY(0x00, 0x04, KEY_MICMUTE)
+		MATRIX_KEY(0x00, 0x01, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x05, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x03, 0x05, KEY_VOLUMEUP)
+	>;
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins_default>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio_default {
+	pins-low-power-hdmi-disable {
+		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
+			 <PINMUX_GPIO32__FUNC_GPIO32>,
+			 <PINMUX_GPIO33__FUNC_GPIO33>,
+			 <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359_max98390_rt5682";
+	model = "m8195_m98390_5682s";
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"IN1P", "Headset Mic",
+		"Right Spk", "Right BE_OUT",
+		"Left Spk", "Left BE_OUT";
+
+	spk-playback-dai-link {
+		codec {
+			sound-dai = <&spk_r_amp>, <&spk_l_amp>;
+		};
+	};
+};
+
+&spk_amplifier {
+	/* Disable RT1019P, not present on Dojo */
+	status = "disabled";
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt8195-cherry.dtsi b/dts/upstream/src/arm64/mediatek/mt8195-cherry.dtsi
index 4a11918da37..fe5400e17b0 100644
--- a/dts/upstream/src/arm64/mediatek/mt8195-cherry.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8195-cherry.dtsi
@@ -240,6 +240,7 @@
 	spk_amplifier: rt1019p {
 		compatible = "realtek,rt1019p";
 		label = "rt1019p";
+		#sound-dai-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rt1019p_pins_default>;
 		sdb-gpios = <&pio 100 GPIO_ACTIVE_HIGH>;
@@ -366,6 +367,7 @@
 &dp_tx {
 	status = "okay";
 
+	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&dptx_pin>;
 
@@ -436,6 +438,7 @@
 		/* Realtek RT5682i or RT5682s, sharing the same configuration */
 		reg = <0x1a>;
 		interrupts-extended = <&pio 89 IRQ_TYPE_EDGE_BOTH>;
+		#sound-dai-cells = <0>;
 		realtek,jd-src = <1>;
 
 		AVDD-supply = <&mt6359_vio18_ldo_reg>;
@@ -1162,6 +1165,48 @@
 		"AFE_SOF_DL2", "AFE_SOF_DL3", "AFE_SOF_UL4", "AFE_SOF_UL5";
 	pinctrl-names = "default";
 	pinctrl-0 = <&aud_pins_default>;
+
+	audio-routing =
+		"Headphone", "HPOL",
+		"Headphone", "HPOR",
+		"IN1P", "Headset Mic",
+		"Ext Spk", "Speaker";
+
+	mm-dai-link {
+		link-name = "ETDM1_IN_BE";
+		mediatek,clk-provider = "cpu";
+	};
+
+	hs-playback-dai-link {
+		link-name = "ETDM1_OUT_BE";
+		mediatek,clk-provider = "cpu";
+		codec {
+			sound-dai = <&audio_codec>;
+		};
+	};
+
+	hs-capture-dai-link {
+		link-name = "ETDM2_IN_BE";
+		mediatek,clk-provider = "cpu";
+		codec {
+			sound-dai = <&audio_codec>;
+		};
+	};
+
+	spk-playback-dai-link {
+		link-name = "ETDM2_OUT_BE";
+		mediatek,clk-provider = "cpu";
+		codec {
+			sound-dai = <&spk_amplifier>;
+		};
+	};
+
+	displayport-dai-link {
+		link-name = "DPTX_BE";
+		codec {
+			sound-dai = <&dp_tx>;
+		};
+	};
 };
 
 &spi0 {
@@ -1389,6 +1434,11 @@
 		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
 		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
 		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+
+		/* T11 to T13 are present only on Dojo */
+		MATRIX_KEY(0x00, 0x01, 0)	/* T11 */
+		MATRIX_KEY(0x01, 0x05, 0)	/* T12 */
+		MATRIX_KEY(0x03, 0x05, 0)	/* T13 */
 	>;
 
 	linux,keymap = <
diff --git a/dts/upstream/src/arm64/mediatek/mt8195-demo.dts b/dts/upstream/src/arm64/mediatek/mt8195-demo.dts
index b82f7176b4a..31d424b8fc7 100644
--- a/dts/upstream/src/arm64/mediatek/mt8195-demo.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8195-demo.dts
@@ -305,14 +305,14 @@
 				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
 				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
 				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 		pins-cc {
 			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
 				 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
 				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
 				 <PINMUX_GPIO86__FUNC_GBE_RXC>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 		pins-rxd {
 			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
@@ -377,7 +377,7 @@
 	mmc0_default_pins: mmc0-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -392,13 +392,13 @@
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -406,7 +406,7 @@
 	mmc0_uhs_pins: mmc0-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -421,19 +421,19 @@
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-ds {
 			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -441,7 +441,7 @@
 	mmc1_default_pins: mmc1-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -452,7 +452,7 @@
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
@@ -465,7 +465,7 @@
 	mmc1_uhs_pins: mmc1-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -476,7 +476,7 @@
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
diff --git a/dts/upstream/src/arm64/mediatek/mt8195-evb.dts b/dts/upstream/src/arm64/mediatek/mt8195-evb.dts
index 341b6e07413..83456d649ff 100644
--- a/dts/upstream/src/arm64/mediatek/mt8195-evb.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8195-evb.dts
@@ -74,7 +74,6 @@
 			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
 				 <PINMUX_GPIO9__FUNC_SCL0>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-			mediatek,drive-strength-adv = <0>;
 			drive-strength = <6>;
 		};
 	};
@@ -84,7 +83,6 @@
 			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
 				 <PINMUX_GPIO11__FUNC_SCL1>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-			mediatek,drive-strength-adv = <0>;
 			drive-strength = <6>;
 		};
 	};
@@ -94,7 +92,7 @@
 			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
 				 <PINMUX_GPIO17__FUNC_SCL4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-			mediatek,drive-strength-adv = <7>;
+			drive-strength-microamp = <1000>;
 		};
 	};
 
diff --git a/dts/upstream/src/arm64/mediatek/mt8195.dtsi b/dts/upstream/src/arm64/mediatek/mt8195.dtsi
index 5d8b68f86ce..2ee45752583 100644
--- a/dts/upstream/src/arm64/mediatek/mt8195.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8195.dtsi
@@ -3880,7 +3880,7 @@
 			};
 		};
 
-		gpu0-thermal {
+		gpu-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <250>;
 			thermal-sensors = <&lvts_ap MT8195_AP_GPU0>;
diff --git a/dts/upstream/src/arm64/mediatek/mt8365-evk.dts b/dts/upstream/src/arm64/mediatek/mt8365-evk.dts
index 50cbaefa1a9..4211a992dd9 100644
--- a/dts/upstream/src/arm64/mediatek/mt8365-evk.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8365-evk.dts
@@ -308,7 +308,7 @@
 	mmc1_uhs_pins: mmc1-uhs-pins {
 		clk-pins {
 			pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -319,7 +319,7 @@
 				 <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
 				 <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
diff --git a/dts/upstream/src/arm64/mediatek/mt8365.dtsi b/dts/upstream/src/arm64/mediatek/mt8365.dtsi
index 24581f7410a..eb449bfa880 100644
--- a/dts/upstream/src/arm64/mediatek/mt8365.dtsi
+++ b/dts/upstream/src/arm64/mediatek/mt8365.dtsi
@@ -300,9 +300,8 @@
 		};
 
 		scpsys: syscon@10006000 {
-			compatible = "mediatek,mt8365-syscfg", "syscon", "simple-mfd";
+			compatible = "mediatek,mt8365-scpsys", "syscon", "simple-mfd";
 			reg = <0 0x10006000 0 0x1000>;
-			#power-domain-cells = <1>;
 
 			/* System Power Manager */
 			spm: power-controller {
diff --git a/dts/upstream/src/arm64/mediatek/mt8390-genio-700-evk.dts b/dts/upstream/src/arm64/mediatek/mt8390-genio-700-evk.dts
new file mode 100644
index 00000000000..1474bef7e75
--- /dev/null
+++ b/dts/upstream/src/arm64/mediatek/mt8390-genio-700-evk.dts
@@ -0,0 +1,880 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Chris Chen <chris-qj.chen@mediatek.com>
+ *	   Pablo Sun <pablo.sun@mediatek.com>
+ *	   Macpaul Lin <macpaul.lin@mediatek.com>
+ */
+/dts-v1/;
+
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "MediaTek Genio-700 EVK";
+	compatible = "mediatek,mt8390-evk", "mediatek,mt8390",
+		     "mediatek,mt8188";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x2 0x00000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		apu_mem: memory@55000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
+		};
+
+		vpu_mem: memory@57000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+
+	common_fixed_5v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	edp_panel_fixed_3v3: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_panel_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_3v3_en_pins>;
+	};
+
+	gpio_fixed_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "gpio_3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sdio_fixed_1v8: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "sdio_io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sdio_fixed_3v3: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "sdio_card";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 74 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	touch0_fixed_3v3: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_hub_fixed_3v3: regulator-6 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_hub_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */
+		startup-delay-us = <10000>;
+		enable-active-high;
+	};
+
+	usb_hub_reset_1v8: regulator-7 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_hub_reset";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 7 GPIO_ACTIVE_HIGH>; /* HUB_RESET */
+		vin-supply = <&usb_hub_fixed_3v3>;
+	};
+
+	usb_p0_vbus: regulator-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_p0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p1_vbus: regulator-9 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_p1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 87 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p2_vbus: regulator-10 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_p2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&touch0_fixed_3v3>;
+		VDDIO-supply = <&mt6359_vio18_ldo_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&rt1715_int_pins>;
+	clock-frequency = <1000000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x1481b>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mt6359_vpa_buck_reg>;
+	vqmmc-supply = <&mt6359_vsim1_ldo_reg>;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn18_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpa_buck_reg {
+	regulator-max-microvolt = <3100000>;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsim1_ldo_reg {
+	regulator-enable-ramp-delay = <480>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359codec {
+	mediatek,mic-type-0 = <1>; /* ACC */
+	mediatek,mic-type-1 = <3>; /* DCC */
+};
+
+&pio {
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>,
+				 <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>,
+				 <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>,
+				 <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>,
+				 <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>,
+				 <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>,
+				 <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>,
+				 <PINMUX_GPIO117__FUNC_O_I2SO2_D0>,
+				 <PINMUX_GPIO118__FUNC_O_I2SO2_D1>,
+				 <PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
+				 <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
+				 <PINMUX_GPIO124__FUNC_I0_PCM_DI>,
+				 <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>,
+				 <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>,
+				 <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>,
+				 <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>;
+		};
+	};
+
+	dptx_pins: dptx-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>;
+			output-high;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
+				 <PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
+				 <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
+				 <PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
+				 <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
+				 <PINMUX_GPIO146__FUNC_B_GPIO146>;
+			output-high;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
+				 <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
+				 <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
+				 <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
+			drive-strength = <8>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
+				 <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
+				 <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
+				 <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
+				 <PINMUX_GPIO140__FUNC_B_GPIO140>,
+				 <PINMUX_GPIO141__FUNC_B_GPIO141>,
+				 <PINMUX_GPIO142__FUNC_B_GPIO142>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
+				 <PINMUX_GPIO144__FUNC_B_GPIO144>;
+			input-disable;
+			bias-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
+				 <PINMUX_GPIO136__FUNC_B_GPIO136>,
+				 <PINMUX_GPIO137__FUNC_B_GPIO137>,
+				 <PINMUX_GPIO138__FUNC_B_GPIO138>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
+				 <PINMUX_GPIO132__FUNC_B_GPIO132>,
+				 <PINMUX_GPIO133__FUNC_B_GPIO133>,
+				 <PINMUX_GPIO134__FUNC_B_GPIO134>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	gpio_key_pins: gpio-key-pins {
+		pins {
+			pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>,
+				 <PINMUX_GPIO43__FUNC_B1_KPCOL1>,
+				 <PINMUX_GPIO44__FUNC_B1_KPROW0>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-insert {
+			pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>,
+				 <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>,
+				 <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>,
+				 <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
+				 <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_default_pins: mmc2-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+			drive-strength = <4>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-pcm {
+			pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>;
+		};
+	};
+
+	mmc2_uhs_pins: mmc2-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
+			drive-strength = <4>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>,
+				 <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>,
+				 <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>,
+				 <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
+				 <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_eint_pins: mmc2-eint-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc2_dat1_pins: mmc2-dat1-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	panel_default_pins: panel-default-pins {
+		pins-dcdc {
+			pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>;
+			output-low;
+		};
+
+		pins-en {
+			pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>;
+			output-low;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>;
+			output-high;
+		};
+	};
+
+	rt1715_int_pins: rt1715-int-pins {
+		pins_cmd0_dat {
+			pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				<PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				<PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				<PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				<PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				<PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				<PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				<PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	touch_pins: touch-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>;
+			output-high;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>,
+				 <PINMUX_GPIO34__FUNC_I1_URXD1>;
+			bias-pull-up;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
+				 <PINMUX_GPIO36__FUNC_I1_URXD2>;
+			bias-pull-up;
+		};
+	};
+
+	usb_default_pins: usb-default-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-valid {
+			pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>;
+			input-enable;
+		};
+
+		pins-vbus {
+			pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>;
+			output-high;
+		};
+
+	};
+
+	usb1_default_pins: usb1-default-pins {
+		pins-valid {
+			pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>;
+			input-enable;
+		};
+
+		pins-usb-hub-3v3-en {
+			pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>;
+			output-high;
+		};
+	};
+
+	wifi_pwrseq_pins: wifi-pwrseq-pins {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>;
+			output-low;
+		};
+	};
+};
+
+&pmic {
+	interrupt-parent = <&pio>;
+	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+};
+
+&xhci1 {
+	status = "okay";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_hub_reset_1v8>;
+};
+
+&xhci2 {
+	status = "okay";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt8395-genio-1200-evk.dts b/dts/upstream/src/arm64/mediatek/mt8395-genio-1200-evk.dts
index 1558649f633..a06610fff8a 100644
--- a/dts/upstream/src/arm64/mediatek/mt8395-genio-1200-evk.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8395-genio-1200-evk.dts
@@ -475,7 +475,7 @@
 				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
 				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
 				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 
 		pins-mdio {
@@ -502,7 +502,7 @@
 				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
 				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
 				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 		};
 	};
 
@@ -567,7 +567,7 @@
 			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
 				 <PINMUX_GPIO13__FUNC_SCL2>;
 			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 		};
 	};
 
@@ -582,7 +582,7 @@
 	mmc0_default_pins: mmc0-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -597,13 +597,13 @@
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <6>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -611,7 +611,7 @@
 	mmc0_uhs_pins: mmc0-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -626,19 +626,19 @@
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-ds {
 			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -646,7 +646,7 @@
 	mmc1_default_pins: mmc1-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -657,7 +657,7 @@
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -665,7 +665,7 @@
 	mmc1_uhs_pins: mmc1-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -676,7 +676,7 @@
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};
@@ -854,6 +854,10 @@
 
 &u3phy1 {
 	status = "okay";
+
+	u3port1: usb-phy@700 {
+		mediatek,force-mode;
+	};
 };
 
 &u3phy2 {
@@ -900,6 +904,8 @@
 };
 
 &xhci1 {
+	phys = <&u2port1 PHY_TYPE_USB2>,
+	       <&u3port1 PHY_TYPE_USB3>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/mediatek/mt8395-kontron-3-5-sbc-i1200.dts b/dts/upstream/src/arm64/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
new file mode 100644
index 00000000000..e4b2af9489a
--- /dev/null
+++ b/dts/upstream/src/arm64/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
@@ -0,0 +1,1127 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Kontron Europe GmbH
+ *
+ * Author: Michael Walle <mwalle@kernel.org>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	model = "Kontron 3.5\"-SBC-i1200";
+	compatible = "kontron,3-5-sbc-i1200", "mediatek,mt8395", "mediatek,mt8195";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		key-0 {
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x0 0x80000000>;
+	};
+
+	vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		snd_dma_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+
+	thermal_sensor0: thermal-sensor-0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-25000) 1474
+					    (-20000) 1374
+					    (-15000) 1260
+					    (-10000) 1134
+					     (-5000) 1004
+						   0 874
+						5000 750
+					       10000 635
+					       15000 532
+					       20000 443
+					       25000 367
+					       30000 303
+					       35000 250
+					       40000 206
+					       45000 170
+					       50000 141
+					       55000 117
+					       60000 97
+					       65000 81
+					       70000 68
+					       75000 57
+					       80000 48
+					       85000 41
+					       90000 35
+					       95000 30
+					      100000 25
+					      105000 22
+					      110000 19
+					      115000 16
+					      120000 14
+					      125000 12
+					      130000 10
+					      135000 9
+					      140000 8
+					      145000 7
+					      150000 6>;
+	};
+
+	thermal_sensor1: thermal-sensor-1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-25000) 1474
+					    (-20000) 1374
+					    (-15000) 1260
+					    (-10000) 1134
+					     (-5000) 1004
+						   0 874
+						5000 750
+					       10000 635
+					       15000 532
+					       20000 443
+					       25000 367
+					       30000 303
+					       35000 250
+					       40000 206
+					       45000 170
+					       50000 141
+					       55000 117
+					       60000 97
+					       65000 81
+					       70000 68
+					       75000 57
+					       80000 48
+					       85000 41
+					       90000 35
+					       95000 30
+					      100000 25
+					      105000 22
+					      110000 19
+					      115000 16
+					      120000 14
+					      125000 12
+					      130000 10
+					      135000 9
+					      140000 8
+					      145000 7
+					      150000 6>;
+	};
+
+	thermal_sensor2: thermal-sensor-2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 2>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <(-25000) 1474
+					    (-20000) 1374
+					    (-15000) 1260
+					    (-10000) 1134
+					     (-5000) 1004
+						   0 874
+						5000 750
+					       10000 635
+					       15000 532
+					       20000 443
+					       25000 367
+					       30000 303
+					       35000 250
+					       40000 206
+					       45000 170
+					       50000 141
+					       55000 117
+					       60000 97
+					       65000 81
+					       70000 68
+					       75000 57
+					       80000 48
+					       85000 41
+					       90000 35
+					       95000 30
+					      100000 25
+					      105000 22
+					      110000 19
+					      115000 16
+					      120000 14
+					      125000 12
+					      130000 10
+					      135000 9
+					      140000 8
+					      145000 7
+					      150000 6>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&eth {
+	phy-mode ="rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	status = "okay";
+
+	mdio {
+		ethernet_phy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+			interrupts-extended = <&pio 94 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&pio 93 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&mt6315_7_vbuck1>;
+};
+
+/* CSI1/CSI2 connector */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* CSI3 connector */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* LVDS bridge @f */
+};
+
+/* Touch panel connector */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+/* B2B connector */
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-controller;
+		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		#interrupt-cells = <1>;
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN1-supply = <&vsys>;
+			LDO_VIN2-supply = <&vsys>;
+			LDO_VIN3-supply = <&vsys>;
+
+			mt6360_buck1: BUCK1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: BUCK2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: LDO1 {
+				regulator-name = "mt6360_ldo1"; /* Test point */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo2: LDO2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: LDO3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: LDO5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo6: LDO6 {
+				regulator-name = "mt6360_ldo6"; /* Test point */
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: LDO7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	hs400-ds-delay = <0x14c11>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_detect_pins>;
+	pinctrl-1 = <&mmc1_default_pins>;
+	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins_default>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins_default>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	eth_default_pins: eth-default-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
+			output-high;
+		};
+
+		pins-interrupt {
+			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>;
+			input-enable;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins {
+			pinmux = <PINMUX_GPIO14__FUNC_SDA3>,
+				 <PINMUX_GPIO15__FUNC_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_detect_pins: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			bias-pull-up;
+		};
+	};
+
+	nor_pins_default: nor-default-pins {
+		pins-ck-io {
+			pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
+				 <PINMUX_GPIO141__FUNC_SPINOR_CK>,
+				 <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		pins-cs {
+			pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>;
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_pins_default: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_pins_default: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	led_pins: led-pins {
+		pins-power-en {
+			pinmux = <PINMUX_GPIO107__FUNC_GPIO107>;
+			output-high;
+		};
+	};
+
+	spi0_pins: spi0-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+				 <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+				 <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+			bias-pull-down;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-pull-down;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO99__FUNC_URXD0>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO103__FUNC_URXD1>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO100__FUNC_URTS1>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO101__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO68__FUNC_URXD2>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO67__FUNC_UTXD2>;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO66__FUNC_URTS2>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO65__FUNC_UCTS2>;
+			input-enable;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO5__FUNC_URXD3>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO4__FUNC_UTXD3>;
+		};
+	};
+
+	uart4_pins: uart4-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO7__FUNC_URXD4>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO6__FUNC_UTXD4>;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	firmware-name = "mediatek/mt8195/scp.img";
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <625000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* USB3.2 front port */
+&ssusb0 {
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+/* USB2.0 M.2 Key-E */
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+/* USB2.0 to on-board usb hub */
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* B2B connector */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&thermal_zones {
+	cpu-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&thermal_sensor0>;
+
+		trips {
+			trip-alert {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			trip-crit {
+				temperature = <95000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pcb-top-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&thermal_sensor1>;
+
+		trips {
+			trip-alert {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			trip-crit {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pcb-bottom-thermal {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&thermal_sensor2>;
+
+		trips {
+			trip-alert {
+				temperature = <75000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			trip-crit {
+				temperature = <85000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+/* USB3 */
+&u3phy0 {
+	status = "okay";
+};
+
+/* PCIe1/USB2 */
+&u3phy1 {
+	status = "okay";
+};
+
+/* USB2 */
+&u3phy2 {
+	status = "okay";
+};
+
+/* USB2 */
+&u3phy3 {
+	status = "okay";
+};
+
+/* USB3.2 front port */
+&xhci0 {
+	status = "okay";
+};
+
+/* USB2.0 M.2 Key-B */
+&xhci1 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	mediatek,u3p-dis-msk = <0x01>;
+	status = "okay";
+};
+
+/* USB2.0 M.2 Key-E */
+&xhci2 {
+	status = "okay";
+};
+
+/* USB2.0 to on-board usb hub */
+&xhci3 {
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/mediatek/mt8395-radxa-nio-12l.dts b/dts/upstream/src/arm64/mediatek/mt8395-radxa-nio-12l.dts
index e5d9b671a40..4b5f6cf16f7 100644
--- a/dts/upstream/src/arm64/mediatek/mt8395-radxa-nio-12l.dts
+++ b/dts/upstream/src/arm64/mediatek/mt8395-radxa-nio-12l.dts
@@ -140,6 +140,38 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
 &eth {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&rgmii_phy>;
@@ -343,6 +375,14 @@
 	};
 };
 
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
 /* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */
 &mmc0 {
 	pinctrl-names = "default", "state_uhs";
@@ -434,6 +474,8 @@
 };
 
 &pio {
+	mediatek,rsel-resistance-in-si-unit;
+
 	eth_default_pins: eth-default-pins {
 		pins-cc {
 			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
@@ -509,7 +551,7 @@
 		pins-bus {
 			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
 				 <PINMUX_GPIO13__FUNC_SCL2>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			bias-pull-up = <1000>;
 			drive-strength = <6>;
 			drive-strength-microamp = <1000>;
 		};
@@ -519,7 +561,7 @@
 		pins-bus {
 			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
 				 <PINMUX_GPIO17__FUNC_SCL4>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			bias-pull-up = <1000>;
 			drive-strength-microamp = <1000>;
 		};
 	};
@@ -528,7 +570,7 @@
 		pins {
 			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
 				 <PINMUX_GPIO26__FUNC_SCL6>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			bias-disable;
 		};
 	};
 
@@ -683,6 +725,26 @@
 		};
 	};
 
+	usb3_port0_pins: usb3p0-default-pins {
+		pins-vbus {
+			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
+			input-enable;
+		};
+	};
+
+	usb2_port0_pins: usb2p0-default-pins {
+		pins-iddig {
+			pinmux = <PINMUX_GPIO130__FUNC_IDDIG_1P>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-vbus {
+			pinmux = <PINMUX_GPIO131__FUNC_USB_DRVVBUS_1P>;
+			output-low;
+		};
+	};
+
 	wifi_vreg_pins: wifi-vreg-pins {
 		pins-wifi-pmu-en {
 			pinmux = <PINMUX_GPIO65__FUNC_GPIO65>;
@@ -707,6 +769,10 @@
 	status = "okay";
 };
 
+&pciephy {
+	status = "okay";
+};
+
 &pmic {
 	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
 };
@@ -774,6 +840,18 @@
 	};
 };
 
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
 &uart0 {
 	/* Exposed at 40 pin connector */
 	pinctrl-0 = <&uart0_pins>;
@@ -789,6 +867,8 @@
 };
 
 &ssusb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_port0_pins>;
 	role-switch-default-mode = "host";
 	usb-role-switch;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
@@ -802,6 +882,8 @@
 };
 
 &ssusb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_port0_pins>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/microchip/sparx5_pcb134_board.dtsi b/dts/upstream/src/arm64/microchip/sparx5_pcb134_board.dtsi
index 2c5574734c9..e60acc74e82 100644
--- a/dts/upstream/src/arm64/microchip/sparx5_pcb134_board.dtsi
+++ b/dts/upstream/src/arm64/microchip/sparx5_pcb134_board.dtsi
@@ -13,6 +13,20 @@
 		priority = <200>;
 	};
 
+	i2c0_imux: i2c-mux-0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
+	i2c0_emux: i2c-mux-1 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led-0 {
@@ -248,6 +262,186 @@
 			default-state = "off";
 		};
 	};
+
+	sfp_eth12: sfp-eth12 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth13: sfp-eth13 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth14: sfp-eth14 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth15: sfp-eth15 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth48: sfp-eth48 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp5>;
+		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth49: sfp-eth49 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp6>;
+		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth50: sfp-eth50 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp7>;
+		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth51: sfp-eth51 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp8>;
+		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth52: sfp-eth52 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp9>;
+		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth53: sfp-eth53 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp10>;
+		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth54: sfp-eth54 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp11>;
+		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth55: sfp-eth55 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp12>;
+		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth56: sfp-eth56 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp13>;
+		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth57: sfp-eth57 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp14>;
+		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth58: sfp-eth58 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp15>;
+		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth59: sfp-eth59 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp16>;
+		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth60: sfp-eth60 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp17>;
+		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp18>;
+		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp19>;
+		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp20>;
+		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &sgpio0 {
@@ -385,21 +579,6 @@
 	};
 };
 
-&axi {
-	i2c0_imux: i2c-mux-0 {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-	i2c0_emux: i2c-mux-1 {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-};
-
 &i2c0_imux {
 	pinctrl-names =
 		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
@@ -535,169 +714,6 @@
 	};
 };
 
-&axi {
-	sfp_eth12: sfp-eth12 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp1>;
-		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth13: sfp-eth13 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp2>;
-		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth14: sfp-eth14 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp3>;
-		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth15: sfp-eth15 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp4>;
-		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth48: sfp-eth48 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp5>;
-		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth49: sfp-eth49 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp6>;
-		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth50: sfp-eth50 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp7>;
-		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth51: sfp-eth51 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp8>;
-		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth52: sfp-eth52 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp9>;
-		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth53: sfp-eth53 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp10>;
-		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth54: sfp-eth54 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp11>;
-		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth55: sfp-eth55 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp12>;
-		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth56: sfp-eth56 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp13>;
-		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth57: sfp-eth57 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp14>;
-		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth58: sfp-eth58 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp15>;
-		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth59: sfp-eth59 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp16>;
-		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth60: sfp-eth60 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp17>;
-		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth61: sfp-eth61 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp18>;
-		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth62: sfp-eth62 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp19>;
-		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth63: sfp-eth63 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp20>;
-		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
-		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
-	};
-};
-
 &switch {
 	ethernet-ports {
 		#address-cells = <1>;
diff --git a/dts/upstream/src/arm64/microchip/sparx5_pcb135_board.dtsi b/dts/upstream/src/arm64/microchip/sparx5_pcb135_board.dtsi
index af2f1831f07..196868898f4 100644
--- a/dts/upstream/src/arm64/microchip/sparx5_pcb135_board.dtsi
+++ b/dts/upstream/src/arm64/microchip/sparx5_pcb135_board.dtsi
@@ -13,6 +13,13 @@
 		priority = <200>;
 	};
 
+	i2c0_imux: i2c-mux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led-0 {
@@ -56,6 +63,46 @@
 			default-state = "off";
 		};
 	};
+
+	sfp_eth60: sfp-eth60 {
+		compatible	 = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &gpio {
@@ -119,15 +166,6 @@
 	microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
 };
 
-&axi {
-	i2c0_imux: i2c-mux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-parent = <&i2c0>;
-	};
-};
-
 &i2c0_imux {
 	pinctrl-names =
 		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
@@ -159,45 +197,6 @@
 	};
 };
 
-&axi {
-	sfp_eth60: sfp-eth60 {
-		compatible	 = "sff,sfp";
-		i2c-bus = <&i2c_sfp1>;
-		tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth61: sfp-eth61 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp2>;
-		tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth62: sfp-eth62 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp3>;
-		tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
-	};
-	sfp_eth63: sfp-eth63 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp4>;
-		tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
-		rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
-		los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
-	};
-};
-
 &mdio0 {
 	status = "okay";
 	phy0: ethernet-phy@0 {
diff --git a/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts b/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts
index 1607ee14216..82a59e33c46 100644
--- a/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts
+++ b/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts
@@ -1,11 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/input/gpio-keys.h>
-
-#include "tegra234-p3767.dtsi"
-#include "tegra234-p3768-0000.dtsi"
+#include "tegra234-p3768-0000+p3767.dtsi"
 
 / {
 	compatible = "nvidia,p3768-0000+p3767-0000", "nvidia,p3767-0000", "nvidia,tegra234";
@@ -29,83 +25,12 @@
 			status = "okay";
 		};
 
-		pwm@32a0000 {
-			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
-			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
-			status = "okay";
-		};
-
 		hda@3510000 {
 			nvidia,model = "NVIDIA Jetson Orin NX HDA";
 		};
-
-		padctl@3520000 {
-			status = "okay";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-force-recovery {
-			label = "Force Recovery";
-			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <BTN_1>;
-		};
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_POWER>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-suspend {
-			label = "Suspend";
-			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_KEY>;
-			linux,code = <KEY_SLEEP>;
-		};
-	};
-
-	pwm-fan {
-		cooling-levels = <0 88 187 255>;
-	};
-
-	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_3V3_PCIE";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
 	};
 
 	sound {
 		label = "NVIDIA Jetson Orin NX APE";
 	};
-
-	thermal-zones {
-		tj-thermal {
-			cooling-maps {
-				map-active-0 {
-					cooling-device = <&fan 0 1>;
-					trip = <&tj_trip_active0>;
-				};
-
-				map-active-1 {
-					cooling-device = <&fan 1 2>;
-					trip = <&tj_trip_active1>;
-				};
-
-				map-active-2 {
-					cooling-device = <&fan 2 3>;
-					trip = <&tj_trip_active2>;
-				};
-			};
-		};
-	};
 };
diff --git a/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts b/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts
index dc2d4bef1e8..9f5e07012b8 100644
--- a/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts
+++ b/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts
@@ -1,11 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/input/gpio-keys.h>
-
-#include "tegra234-p3767.dtsi"
-#include "tegra234-p3768-0000.dtsi"
+#include "tegra234-p3768-0000+p3767.dtsi"
 
 / {
 	compatible = "nvidia,p3768-0000+p3767-0005", "nvidia,p3767-0005", "nvidia,tegra234";
@@ -17,32 +13,7 @@
 		};
 	};
 
-	pwm-fan {
-		cooling-levels = <0 88 187 255>;
-	};
-
 	sound {
 		label = "NVIDIA Jetson Orin Nano APE";
 	};
-
-	thermal-zones {
-		tj-thermal {
-			cooling-maps {
-				map-active-0 {
-					cooling-device = <&fan 0 1>;
-					trip = <&tj_trip_active0>;
-				};
-
-				map-active-1 {
-					cooling-device = <&fan 1 2>;
-					trip = <&tj_trip_active1>;
-				};
-
-				map-active-2 {
-					cooling-device = <&fan 2 3>;
-					trip = <&tj_trip_active2>;
-				};
-			};
-		};
-	};
 };
diff --git a/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000.dtsi b/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000+p3767.dtsi
index 5d0298b6c30..6d64a24fa25 100644
--- a/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000.dtsi
+++ b/dts/upstream/src/arm64/nvidia/tegra234-p3768-0000+p3767.dtsi
@@ -1,7 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra234-p3767.dtsi"
+
 / {
-	compatible = "nvidia,p3768-0000";
 
 	aliases {
 		serial0 = &tcu;
@@ -210,6 +214,7 @@
 		compatible = "pwm-fan";
 		pwms = <&pwm3 0 45334>;
 		#cooling-cells = <2>;
+		cooling-levels = <0 88 187 255>;
 	};
 
 	vdd_1v8_sys: regulator-vdd-1v8-sys {
@@ -241,4 +246,25 @@
 	serial {
 		status = "okay";
 	};
+
+	thermal-zones {
+		tj-thermal {
+			cooling-maps {
+				map-active-0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&tj_trip_active0>;
+				};
+
+				map-active-1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&tj_trip_active1>;
+				};
+
+				map-active-2 {
+					cooling-device = <&fan 2 3>;
+					trip = <&tj_trip_active2>;
+				};
+			};
+		};
+	};
 };
diff --git a/dts/upstream/src/arm64/qcom/apq8016-schneider-hmibsc.dts b/dts/upstream/src/arm64/qcom/apq8016-schneider-hmibsc.dts
new file mode 100644
index 00000000000..75c6137e5a1
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/apq8016-schneider-hmibsc.dts
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
+
+/ {
+	model = "Schneider Electric HMIBSC Board";
+	compatible = "schneider,apq8016-hmibsc", "qcom,apq8016";
+
+	aliases {
+		i2c1 = &blsp_i2c6;
+		i2c3 = &blsp_i2c4;
+		i2c4 = &blsp_i2c3;
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart1;
+		serial1 = &blsp_uart2;
+		spi0 = &blsp_spi5;
+		usid0 = &pm8916_0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&msm_key_volp_n_default>;
+		pinctrl-names = "default";
+
+		button {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pm8916_mpps_leds>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		ramoops@bff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xbff00000 0x0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	usb-hub {
+		compatible = "smsc,usb3503";
+		reset-gpios = <&pm8916_gpios 1 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	adv_bridge: bridge@39 {
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,dsi-lanes = <4>;
+		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+		clock-names = "cec";
+		pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		avdd-supply = <&pm8916_l6>;
+		a2vdd-supply = <&pm8916_l6>;
+		dvdd-supply = <&pm8916_l6>;
+		pvdd-supply = <&pm8916_l6>;
+		v1p2-supply = <&pm8916_l6>;
+		v3p3-supply = <&pm8916_l17>;
+
+		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+		pinctrl-names = "default","sleep";
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7533_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&blsp_spi5 {
+	cs-gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <500000>;
+	};
+};
+
+&blsp_uart1 {
+	label = "UART0";
+	status = "okay";
+};
+
+&blsp_uart2 {
+	label = "UART1";
+	status = "okay";
+};
+
+&lpass {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&adv7533_in>;
+};
+
+&pm8916_codec {
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	status = "okay";
+};
+
+&pm8916_gpios {
+	gpio-line-names =
+		"USB_HUB_RESET_N_PM",
+		"USB_SW_SEL_PM",
+		"NC",
+		"NC";
+
+	usb_hub_reset_pm: usb-hub-reset-pm-state {
+		pins = "gpio1";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		input-disable;
+		output-high;
+	};
+
+	usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
+		pins = "gpio1";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		input-disable;
+		output-low;
+	};
+
+	usb_sw_sel_pm: usb-sw-sel-pm-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-high;
+	};
+
+	usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-low;
+	};
+};
+
+&pm8916_mpps {
+	gpio-line-names =
+		"NC",
+		"WLAN_LED_CTRL",
+		"BT_LED_CTRL",
+		"NC";
+
+	pm8916_mpps_leds: pm8916-mpps-state {
+		pins = "mpp2", "mpp3";
+		function = "digital";
+		output-low;
+	};
+};
+
+&pm8916_resin {
+	linux,code = <KEY_POWER>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sound {
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+	model = "HMIBSC";
+	audio-routing =
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+	status = "okay";
+
+	quaternary-dai-link {
+		link-name = "ADV7533";
+		cpu {
+			sound-dai = <&lpass MI2S_QUATERNARY>;
+		};
+		codec {
+			sound-dai = <&adv_bridge 0>;
+		};
+	};
+
+	primary-dai-link {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	tertiary-dai-link {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
+
+&tlmm {
+	pinctrl-0 = <&uart1_mux0_rs232_high &uart1_mux1_rs232_low>;
+	pinctrl-names = "default";
+
+	adv7533_int_active: adv533-int-active-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_int_suspend: adv7533-int-suspend-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	adv7533_switch_active: adv7533-switch-active-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_switch_suspend: adv7533-switch-suspend-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_key_volp_n_default: msm-key-volp-n-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	/*
+	 * UART1 being the debug console supports various modes of
+	 * operation (RS-232/485/422) controlled via GPIOs configured
+	 * mux as follows:
+	 *
+	 *   gpio100    gpio99    UART mode
+	 *   0          0         loopback
+	 *   0          1         RS-232
+	 *   1          0         RS-485
+	 *   1          1         RS-422
+	 *
+	 * The default mode configured here is RS-232 mode.
+	 */
+	uart1_mux0_rs232_high: uart1-mux0-rs232-state {
+		bootph-all;
+		pins = "gpio99";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-high;
+	};
+
+	uart1_mux1_rs232_low: uart1-mux1-rs232-state {
+		bootph-all;
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
+	pinctrl-names = "default", "device";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	firmware-name = "qcom/apq8016/wcnss.mbn";
+	status = "okay";
+};
+
+&wcnss_ctrl {
+	firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in msm8916.dtsi */
+
+/*
+ * 2mA drive strength is not enough when connecting multiple
+ * I2C devices with different pull up resistors.
+ */
+&blsp_i2c4_default {
+	drive-strength = <16>;
+};
+
+&blsp_i2c6_default {
+	drive-strength = <16>;
+};
+
+&blsp_uart1_default {
+	bootph-all;
+};
+
+/* Enable CoreSight */
+&cti0 { status = "okay"; };
+&cti1 { status = "okay"; };
+&cti12 { status = "okay"; };
+&cti13 { status = "okay"; };
+&cti14 { status = "okay"; };
+&cti15 { status = "okay"; };
+&debug0 { status = "okay"; };
+&debug1 { status = "okay"; };
+&debug2 { status = "okay"; };
+&debug3 { status = "okay"; };
+&etf { status = "okay"; };
+&etm0 { status = "okay"; };
+&etm1 { status = "okay"; };
+&etm2 { status = "okay"; };
+&etm3 { status = "okay"; };
+&etr { status = "okay"; };
+&funnel0 { status = "okay"; };
+&funnel1 { status = "okay"; };
+&replicator { status = "okay"; };
+&stm { status = "okay"; };
+&tpiu { status = "okay"; };
diff --git a/dts/upstream/src/arm64/qcom/ipq5018-tplink-archer-ax55-v1.dts b/dts/upstream/src/arm64/qcom/ipq5018-tplink-archer-ax55-v1.dts
new file mode 100644
index 00000000000..5bb021cb29c
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/ipq5018-tplink-archer-ax55-v1.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "ipq5018.dtsi"
+
+/ {
+	model = "TP-Link Archer AX55 v1";
+	compatible = "tplink,archer-ax55-v1", "qcom,ipq5018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN_ONLINE;
+			gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN_2GHZ;
+			gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN_5GHZ;
+			gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button-reset {
+			debounce-interval = <60>;
+			gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+
+		button-wps {
+			debounce-interval = <60>;
+			gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	button_pins: button-pins-state {
+		pins = "gpio25", "gpio31";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	led_pins: led-pins-state {
+		pins = "gpio10", "gpio11", "gpio13", "gpio18", "gpio22",
+		       "gpio38", "gpio39";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	uart_pins: uart-pins-state {
+		pins = "gpio20", "gpio21";
+		function = "blsp0_uart0";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/dts/upstream/src/arm64/qcom/ipq5018.dtsi b/dts/upstream/src/arm64/qcom/ipq5018.dtsi
index 32b178b639f..7e6e2c12197 100644
--- a/dts/upstream/src/arm64/qcom/ipq5018.dtsi
+++ b/dts/upstream/src/arm64/qcom/ipq5018.dtsi
@@ -179,7 +179,6 @@
 				 <0>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			#power-domain-cells = <1>;
 		};
 
 		tcsr_mutex: hwlock@1905000 {
diff --git a/dts/upstream/src/arm64/qcom/ipq5332.dtsi b/dts/upstream/src/arm64/qcom/ipq5332.dtsi
index 770d9c2fb45..0a74ed4f72c 100644
--- a/dts/upstream/src/arm64/qcom/ipq5332.dtsi
+++ b/dts/upstream/src/arm64/qcom/ipq5332.dtsi
@@ -208,7 +208,6 @@
 			reg = <0x01800000 0x80000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			#power-domain-cells = <1>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
 				 <0>,
@@ -321,8 +320,8 @@
 			reg = <0x08af8800 0x400>;
 
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 53 IRQ_TYPE_EDGE_BOTH>,
-				     <GIC_SPI 52 IRQ_TYPE_EDGE_BOTH>;
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
diff --git a/dts/upstream/src/arm64/qcom/ipq6018.dtsi b/dts/upstream/src/arm64/qcom/ipq6018.dtsi
index 17ab6c47595..e1e45da7f78 100644
--- a/dts/upstream/src/arm64/qcom/ipq6018.dtsi
+++ b/dts/upstream/src/arm64/qcom/ipq6018.dtsi
@@ -396,7 +396,7 @@
 			};
 		};
 
-		gcc: gcc@1800000 {
+		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-ipq6018";
 			reg = <0x0 0x01800000 0x0 0x80000>;
 			clocks = <&xo>, <&sleep_clk>;
@@ -457,6 +457,25 @@
 			};
 		};
 
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x07804000 0x0 0x1000>,
+			      <0x0 0x07805000 0x0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
+			max-frequency = <192000000>;
+			status = "disabled";
+		};
+
 		blsp_dma: dma-controller@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x07884000 0x0 0x2b000>;
@@ -685,6 +704,7 @@
 				clocks = <&xo>;
 				clock-names = "ref";
 				tx-fifo-resize;
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -923,7 +943,6 @@
 	thermal-zones {
 		nss-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 4>;
 
 			trips {
@@ -937,7 +956,6 @@
 
 		nss-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 5>;
 
 			trips {
@@ -951,7 +969,6 @@
 
 		wcss-phya0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 7>;
 
 			trips {
@@ -979,7 +996,6 @@
 
 		cpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 13>;
 
 			trips {
@@ -1009,7 +1025,6 @@
 
 		lpass-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 14>;
 
 			trips {
@@ -1023,7 +1038,6 @@
 
 		ddrss-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 15>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/ipq8074.dtsi b/dts/upstream/src/arm64/qcom/ipq8074.dtsi
index 5d42de829e7..284a4553070 100644
--- a/dts/upstream/src/arm64/qcom/ipq8074.dtsi
+++ b/dts/upstream/src/arm64/qcom/ipq8074.dtsi
@@ -363,7 +363,7 @@
 			};
 		};
 
-		gcc: gcc@1800000 {
+		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-ipq8074";
 			reg = <0x01800000 0x80000>;
 			clocks = <&xo>,
@@ -666,6 +666,7 @@
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -715,6 +716,7 @@
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_1>, <&ssphy_1>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -982,7 +984,6 @@
 	thermal-zones {
 		nss-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -997,7 +998,6 @@
 
 		nss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -1012,7 +1012,6 @@
 
 		nss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -1027,7 +1026,6 @@
 
 		wcss-phya0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -1042,7 +1040,6 @@
 
 		wcss-phya1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -1057,7 +1054,6 @@
 
 		cpu0_thermal: cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 9>;
 
@@ -1072,7 +1068,6 @@
 
 		cpu1_thermal: cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 10>;
 
@@ -1087,7 +1082,6 @@
 
 		cpu2_thermal: cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 11>;
 
@@ -1102,7 +1096,6 @@
 
 		cpu3_thermal: cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 12>;
 
@@ -1117,7 +1110,6 @@
 
 		cluster_thermal: cluster-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 13>;
 
@@ -1132,7 +1124,6 @@
 
 		wcss-phyb0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 14>;
 
@@ -1147,7 +1138,6 @@
 
 		wcss-phyb1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 15>;
 
diff --git a/dts/upstream/src/arm64/qcom/ipq9574.dtsi b/dts/upstream/src/arm64/qcom/ipq9574.dtsi
index 7f2e5cbf3bb..48dfafea46a 100644
--- a/dts/upstream/src/arm64/qcom/ipq9574.dtsi
+++ b/dts/upstream/src/arm64/qcom/ipq9574.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq9574.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -232,6 +233,16 @@
 			clock-names = "core";
 		};
 
+		mdio: mdio@90000 {
+			compatible =  "qcom,ipq9574-mdio", "qcom,ipq4019-mdio";
+			reg = <0x00090000 0x64>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_MDIO_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+			status = "disabled";
+		};
+
 		qfprom: efuse@a4000 {
 			compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
 			reg = <0x000a4000 0x5a1>;
@@ -305,7 +316,7 @@
 				 <0>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			#power-domain-cells = <1>;
+			#interconnect-cells = <1>;
 		};
 
 		tcsr_mutex: hwlock@1905000 {
@@ -749,8 +760,6 @@
 
 	thermal-zones {
 		nss-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 3>;
 
 			trips {
@@ -763,8 +772,6 @@
 		};
 
 		ubi-0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 4>;
 
 			trips {
@@ -777,8 +784,6 @@
 		};
 
 		ubi-1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 5>;
 
 			trips {
@@ -791,8 +796,6 @@
 		};
 
 		ubi-2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 6>;
 
 			trips {
@@ -805,8 +808,6 @@
 		};
 
 		ubi-3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 7>;
 
 			trips {
@@ -819,8 +820,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 8>;
 
 			trips {
@@ -833,8 +832,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 9>;
 
 			trips {
@@ -847,8 +844,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 10>;
 
 			trips {
@@ -877,8 +872,6 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 11>;
 
 			trips {
@@ -907,8 +900,6 @@
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 12>;
 
 			trips {
@@ -937,8 +928,6 @@
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 13>;
 
 			trips {
@@ -967,8 +956,6 @@
 		};
 
 		wcss-phyb-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 14>;
 
 			trips {
@@ -981,8 +968,6 @@
 		};
 
 		top-glue-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens 15>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/msm8216-samsung-fortuna3g.dts b/dts/upstream/src/arm64/qcom/msm8216-samsung-fortuna3g.dts
index 366914be7d5..fba68bf8bf7 100644
--- a/dts/upstream/src/arm64/qcom/msm8216-samsung-fortuna3g.dts
+++ b/dts/upstream/src/arm64/qcom/msm8216-samsung-fortuna3g.dts
@@ -9,3 +9,17 @@
 	compatible = "samsung,fortuna3g", "qcom,msm8916";
 	chassis-type = "handset";
 };
+
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
+&st_accel {
+	status = "okay";
+};
+
+&st_magn {
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-acer-a1-724.dts b/dts/upstream/src/arm64/qcom/msm8916-acer-a1-724.dts
index b32c7a97394..b4ce14a7937 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-acer-a1-724.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-acer-a1-724.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -135,6 +136,17 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x4500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <150 237 450 500 590>;
+	qcom,mbhc-vthreshold-high = <150 237 450 500 590>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -170,6 +182,20 @@
 	status = "okay";
 };
 
+&sound {
+	model = "acer-a1-724";
+	audio-routing =
+		"DMIC1", "MIC BIAS External1",
+		"DMIC1", "Digital Mic1",
+		"AMIC2", "MIC BIAS Internal2",
+		"DMIC2", "MIC BIAS External1",
+		"DMIC2", "Digital Mic2";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &pri_mi2s_mclk_default &cdc_dmic_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &pri_mi2s_mclk_sleep &cdc_dmic_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
 &usb {
 	extcon = <&usb_id>, <&usb_id>;
 	status = "okay";
diff --git a/dts/upstream/src/arm64/qcom/msm8916-gplus-fl8005a.dts b/dts/upstream/src/arm64/qcom/msm8916-gplus-fl8005a.dts
index b748d140b52..f7be7e37182 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-gplus-fl8005a.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-gplus-fl8005a.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -23,6 +24,28 @@
 		stdout-path = "serial0";
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		voltage-min-design-microvolt = <3700000>;
+		voltage-max-design-microvolt = <4200000>;
+		energy-full-design-microwatt-hours = <13690000>;
+		charge-full-design-microamp-hours = <3700000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 =
+			<4186000 100>, <4126000 95>, <4078000 90>,
+			<4036000 85>, <3997000 80>, <3962000 75>,
+			<3932000 70>, <3904000 65>, <3874000 60>,
+			<3839000 55>, <3809000 50>, <3792000 45>,
+			<3780000 40>, <3772000 35>, <3764000 30>,
+			<3752000 25>, <3731000 20>, <3704000 16>,
+			<3677000 13>, <3670000 11>, <3668000 10>,
+			<3666000 9>, <3662000 8>, <3658000 7>, <3648000 6>,
+			<3624000 5>, <3580000 4>, <3518000 3>, <3434000 2>,
+			<3310000 1>, <3000000 0>;
+	};
+
 	flash-led-controller {
 		/* Actually qcom,leds-gpio-flash */
 		compatible = "sgmicro,sgm3140";
@@ -111,6 +134,22 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_bms {
+	monitored-battery = <&battery>;
+	status = "okay";
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <150 180 237 450 500>;
+	qcom,mbhc-vthreshold-high = <150 180 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -141,6 +180,14 @@
 	status = "okay";
 };
 
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	extcon = <&usb_id>, <&usb_id>;
 	status = "okay";
diff --git a/dts/upstream/src/arm64/qcom/msm8916-lg-c50.dts b/dts/upstream/src/arm64/qcom/msm8916-lg-c50.dts
new file mode 100644
index 00000000000..a823a1c4020
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/msm8916-lg-c50.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "LG Leon LTE";
+	compatible = "lg,c50", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		volume-up-button {
+			label = "Volume Up";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down-button {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	reg_sd_vmmc: regulator-sdcard-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "sdcard-vmmc";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		startup-delay-us = <5000>;
+
+		pinctrl-0 = <&sd_vmmc_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_usbin {
+	status = "okay";
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&reg_sd_vmmc>;
+
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "peripheral";
+	extcon = <&pm8916_usbin>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sd_vmmc_en_default: sd-vmmc-en-default-state {
+		pins = "gpio60";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-lg-m216.dts b/dts/upstream/src/arm64/qcom/msm8916-lg-m216.dts
new file mode 100644
index 00000000000..07345e694f6
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/msm8916-lg-m216.dts
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "LG K10 (K420n)";
+	compatible = "lg,m216", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3300000>;
+		voltage-max-design-microvolt = <4350000>;
+		energy-full-design-microwatt-hours = <8800000>;
+		charge-full-design-microamp-hours = <2300000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>,
+			<4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>,
+			<3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>,
+			<3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>,
+			<3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>,
+			<3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>,
+			<3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>,
+			<3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		volume-up-button {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down-button {
+			label = "Volume Down";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@11 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x11>;
+
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
+
+		mount-matrix =	 "0", "1", "0",
+				"-1", "0", "0",
+				 "0", "0", "1";
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+	};
+
+	magnetometer@13 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x13>;
+
+		interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&magn_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@34 {
+		compatible = "melfas,mip4_ts";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+		ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x4a00000>;
+};
+
+&pm8916_bms {
+	monitored-battery = <&battery>;
+	power-supplies = <&pm8916_charger>;
+
+	status = "okay";
+};
+
+&pm8916_charger {
+	qcom,fast-charge-safe-current = <700000>;
+	qcom,fast-charge-safe-voltage = <4300000>;
+
+	monitored-battery = <&battery>;
+	status = "okay";
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
+&usb {
+	dr_mode = "peripheral";
+	extcon = <&pm8916_charger>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_charger>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	magn_int_default: magn-int-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		ce-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-motorola-common.dtsi b/dts/upstream/src/arm64/qcom/msm8916-motorola-common.dtsi
new file mode 100644
index 00000000000..6a27d0ecd2a
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/msm8916-motorola-common.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		volume-up-button {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-1 = <&usb_id_sleep>;
+		pinctrl-names = "default", "sleep";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	touchscreen: touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vio-supply = <&pm8916_l6>;
+
+		syna,startup-delay-ms = <100>;
+
+		rmi4-f01@1 {
+			reg = <1>;
+			syna,nosleep-mode = <1>; /* Allow sleeping */
+		};
+
+		rmi4-f11@11 {
+			reg = <11>;
+			syna,sensor-type = <1>; /* Touchscreen */
+		};
+	};
+};
+
+&blsp_uart1 {
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <3100000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+/* CTS/RTX are not used */
+&blsp_uart1_default {
+	pins = "gpio0", "gpio1";
+};
+&blsp_uart1_sleep {
+	pins = "gpio0", "gpio1";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	usb_id_sleep: usb-id-sleep-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-motorola-harpia.dts b/dts/upstream/src/arm64/qcom/msm8916-motorola-harpia.dts
new file mode 100644
index 00000000000..8380451ebbf
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/msm8916-motorola-harpia.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-motorola-common.dtsi"
+
+/ {
+	model = "Motorola Moto G4 Play";
+	compatible = "motorola,harpia", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	battery@36 {
+		compatible = "maxim,max17050";
+		reg = <0x36>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&battery_alert_default>;
+		pinctrl-names = "default";
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,cold-temp = <(-200)>;
+		maxim,dead-volt = <3200>;
+		maxim,over-volt = <4500>;
+	};
+
+	/* charger@6b */
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "bosch,bma253";
+		reg = <0x19>;
+
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>,
+				      <&tlmm 119 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		mount-matrix = "1",  "0", "0",
+			       "0", "-1", "0",
+			       "0",  "0", "1";
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+	};
+
+	/* proximity@49 */
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,micbias1-ext-cap;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &headset_switch_supply_en
+		     &headset_switch_in>;
+	pinctrl-1 = <&cdc_pdm_sleep &headset_switch_supply_en
+		     &headset_switch_in>;
+	pinctrl-names = "default", "sleep";
+};
+
+&touchscreen {
+	interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+	vdd-supply = <&pm8916_l16>;
+
+	pinctrl-0 = <&ts_int_default>;
+	pinctrl-names = "default";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115", "gpio119";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	battery_alert_default: battery-alert-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	headset_switch_in: headset-switch-in-state {
+		pins = "gpio112";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	headset_switch_supply_en: headset-switch-supply-en-state {
+		pins = "gpio111";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio118";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-motorola-osprey.dts b/dts/upstream/src/arm64/qcom/msm8916-motorola-osprey.dts
new file mode 100644
index 00000000000..ec5589fc69b
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/msm8916-motorola-osprey.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-motorola-common.dtsi"
+
+/ {
+	model = "Motorola Moto G 2015";
+	compatible = "motorola,osprey", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reg_touch_vdda: regulator-touch-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_vdda";
+		gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&touch_vdda_default>;
+		pinctrl-names = "default";
+		startup-delay-us = <300>;
+		vin-supply = <&pm8916_l16>;
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	battery@36 {
+		compatible = "maxim,max17050";
+		reg = <0x36>;
+
+		interrupts-extended = <&tlmm 49 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&battery_alert_default>;
+		pinctrl-names = "default";
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,cold-temp = <(-200)>;
+		maxim,dead-volt = <3200>;
+		maxim,over-volt = <4500>;
+
+	};
+};
+
+&blsp_i2c6 {
+	/* magnetometer@c */
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias2-ext-cap;
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC3", "MIC BIAS External1";
+};
+
+&touchscreen {
+	interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>;
+
+	vdd-supply = <&reg_touch_vdda>;
+
+	pinctrl-0 = <&ts_int_default>;
+	pinctrl-names = "default";
+};
+
+&tlmm {
+	battery_alert_default: battery-alert-default-state {
+		pins = "gpio49";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touch_vdda_default: touch-vdda-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-motorola-surnia.dts b/dts/upstream/src/arm64/qcom/msm8916-motorola-surnia.dts
new file mode 100644
index 00000000000..eecf78ba45b
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/msm8916-motorola-surnia.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-motorola-common.dtsi"
+
+/ {
+	model = "Motorola Moto E 2015 LTE";
+	compatible = "motorola,surnia", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	battery@36 {
+		compatible = "maxim,max17050";
+		reg = <0x36>;
+
+		interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&battery_alert_default>;
+		pinctrl-names = "default";
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,cold-temp = <(-200)>;
+		maxim,dead-volt = <3200>;
+		maxim,over-volt = <4500>;
+
+	};
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias2-ext-cap;
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC3", "MIC BIAS External1";
+};
+
+&touchscreen {
+	interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>;
+
+	vdd-supply = <&pm8916_l16>;
+
+	pinctrl-0 = <&ts_int_default>;
+	pinctrl-names = "default";
+};
+
+&tlmm {
+	battery_alert_default: battery-alert-default-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi b/dts/upstream/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
index 4bbbee80b5e..e6355e5e217 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
@@ -28,6 +28,12 @@
 		};
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		precharge-current-microamp = <450000>;
+		precharge-upper-limit-microvolt = <3500000>;
+	};
+
 	clk_pwm: pwm {
 		compatible = "clk-pwm";
 		#pwm-cells = <2>;
@@ -245,7 +251,7 @@
 &blsp_i2c4 {
 	status = "okay";
 
-	battery@35 {
+	fuel-gauge@35 {
 		compatible = "richtek,rt5033-battery";
 		reg = <0x35>;
 		interrupt-parent = <&tlmm>;
@@ -253,6 +259,44 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&fg_alert_default>;
+
+		power-supplies = <&charger>;
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+
+			/*
+			 * Needed for camera, but not used yet.
+			 * Define empty nodes to allow disabling the unused
+			 * regulators.
+			 */
+			LDO {};
+			BUCK {};
+		};
+
+		charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
 	};
 };
 
@@ -476,6 +520,13 @@
 		bias-disable;
 	};
 
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	sdc2_cd_default: sdc2-cd-default-state {
 		pins = "gpio38";
 		function = "gpio";
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-a3u-eur.dts b/dts/upstream/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
index 3b934f5eba4..906d31f1ea2 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-a3u-eur.dts
@@ -55,6 +55,12 @@
 		       "0", "0", "1";
 };
 
+&battery {
+	charge-term-current-microamp = <150000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-a5u-eur.dts b/dts/upstream/src/arm64/qcom/msm8916-samsung-a5u-eur.dts
index 391befa22bb..fe39be7a742 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-a5u-eur.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-a5u-eur.dts
@@ -29,6 +29,12 @@
 			"0", "0", "1";
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1500000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-e5.dts b/dts/upstream/src/arm64/qcom/msm8916-samsung-e5.dts
index fad2535255f..800cb1038da 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-e5.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-e5.dts
@@ -23,6 +23,12 @@
 	chassis-type = "handset";
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1500000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-e7.dts b/dts/upstream/src/arm64/qcom/msm8916-samsung-e7.dts
index b412b61ca25..ec1debd2e24 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-e7.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-e7.dts
@@ -23,6 +23,13 @@
 	chassis-type = "handset";
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1500000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
+
 &pm8916_l17 {
 	regulator-min-microvolt = <3000000>;
 	regulator-max-microvolt = <3000000>;
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi b/dts/upstream/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi
index 5e933fb8b36..81b3e076015 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	aliases {
@@ -26,6 +27,12 @@
 		};
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		precharge-current-microamp = <450000>;
+		precharge-upper-limit-microvolt = <3500000>;
+	};
+
 	clk_pwm_backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&clk_pwm 0 100000>;
@@ -78,6 +85,35 @@
 		max-microvolt = <3300000>;
 	};
 
+	i2c_nfc: i2c-nfc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&nfc_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		s3fwrn5_nfc: nfc@27 {
+			compatible = "samsung,s3fwrn5-i2c";
+			reg = <0x27>;
+
+			interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>;
+
+			en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+			wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+			clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+			pinctrl-0 = <&nfc_default>, <&nfc_clk_req>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+		};
+	};
+
 	reg_motor_vdd: regulator-motor-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "motor_vdd";
@@ -114,6 +150,82 @@
 		interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>;
 		pinctrl-0 = <&muic_int_default>;
 		pinctrl-names = "default";
+
+		usb_con: connector {
+			compatible = "usb-b-connector";
+			label = "micro-USB";
+			type = "micro";
+		};
+	};
+};
+
+&blsp_i2c2 {
+	/* Available sensors vary depending on model variant */
+	status = "okay";
+
+	bosch_accel: accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l5>;
+		vddio-supply = <&pm8916_l5>;
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+
+		mount-matrix = "0", "-1", "0",
+			      "-1",  "0", "0",
+			       "0",  "0", "1";
+
+		status = "disabled";
+	};
+
+	bosch_magn: magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+
+		vdd-supply = <&pm8916_l5>;
+		vddio-supply = <&pm8916_l5>;
+
+		mount-matrix = "0", "-1", "0",
+			      "-1",  "0", "0",
+			       "0",  "0", "1";
+
+		status = "disabled";
+	};
+
+	st_accel: accelerometer@1d {
+		compatible = "st,lsm303c-accel";
+		reg = <0x1d>;
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+
+		st,drdy-int-pin = <1>;
+		mount-matrix = "0", "-1",  "0",
+			       "1",  "0",  "0",
+			       "0",  "0", "-1";
+
+		status = "disabled";
+	};
+
+	st_magn: magnetometer@1e {
+		compatible = "st,lsm303c-magn";
+		reg = <0x1e>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		mount-matrix = "0", "-1",  "0",
+			       "1",  "0",  "0",
+			       "0",  "0", "-1";
+
+		status = "disabled";
 	};
 };
 
@@ -128,6 +240,8 @@
 
 		pinctrl-0 = <&fg_alert_default>;
 		pinctrl-names = "default";
+
+		power-supplies = <&charger>;
 	};
 };
 
@@ -151,6 +265,42 @@
 	};
 };
 
+&blsp_i2c6 {
+	status = "okay";
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+
+			/*
+			 * Needed for camera, but not used yet.
+			 * Define empty nodes to allow disabling the unused
+			 * regulators.
+			 */
+			LDO {};
+			BUCK {};
+		};
+
+		charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
+	};
+};
+
 &blsp_uart2 {
 	status = "okay";
 };
@@ -223,6 +373,13 @@
 };
 
 &tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	backlight_en_default: backlight-en-default-state {
 		pins = "gpio98";
 		function = "gpio";
@@ -263,6 +420,36 @@
 		bias-disable;
 	};
 
+	nfc_default: nfc-default-state {
+		irq-pins {
+			pins = "gpio21";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		nfc-pins {
+			pins = "gpio20", "gpio49";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	nfc_i2c_default: nfc-i2c-default-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	sdc2_cd_default: sdc2-cd-default-state {
 		pins = "gpio38";
 		function = "gpio";
@@ -284,3 +471,13 @@
 		bias-disable;
 	};
 };
+
+&pm8916_gpios {
+	nfc_clk_req: nfc-clk-req-state {
+		pins = "gpio2";
+		function = "func1";
+		power-source = <PM8916_GPIO_L2>;
+		bias-disable;
+		input-enable;
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts b/dts/upstream/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts
index 9d65fa58ba9..677e4e286ac 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts
@@ -21,6 +21,76 @@
 	};
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
+&bosch_accel {
+	status = "okay";
+};
+
+&bosch_magn {
+	status = "okay";
+};
+
+&blsp_i2c6 {
+	/* pmic@34 is on i2c_nfc instead */
+	/delete-node/ pmic@34;
+
+	nfc@27 {
+		compatible = "samsung,s3fwrn5-i2c";
+		reg = <0x27>;
+
+		interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>;
+
+		en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+		clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+		pinctrl-0 = <&nfc_default>, <&nfc_clk_req>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c_nfc {
+	/* nfc@27 is on &blsp_i2c6 */
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+
+			/*
+			 * Needed for camera, but not used yet.
+			 * Define empty nodes to allow disabling the unused
+			 * regulators.
+			 */
+			LDO {};
+			BUCK {};
+		};
+
+		charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
+	};
+};
+
 &mpss_mem {
 	/* Firmware for gprimeltecan needs more space */
 	reg = <0x0 0x86800000 0x0 0x5400000>;
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-grandmax.dts b/dts/upstream/src/arm64/qcom/msm8916-samsung-grandmax.dts
index 5882b3a593b..135df1739db 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-grandmax.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-grandmax.dts
@@ -41,6 +41,12 @@
 	};
 };
 
+&battery {
+	charge-term-current-microamp = <150000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4400000>;
+};
+
 &reg_motor_vdd {
 	gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>;
 };
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-grandprimelte.dts b/dts/upstream/src/arm64/qcom/msm8916-samsung-grandprimelte.dts
index a66ce4b1354..582bfcb0968 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-grandprimelte.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-grandprimelte.dts
@@ -10,6 +10,20 @@
 	chassis-type = "handset";
 };
 
+&battery {
+	charge-term-current-microamp = <200000>;
+	constant-charge-current-max-microamp = <1000000>;
+	constant-charge-voltage-max-microvolt = <4350000>;
+};
+
+&bosch_accel {
+	status = "okay";
+};
+
+&bosch_magn {
+	status = "okay";
+};
+
 &mpss_mem {
 	/* Firmware for grandprimelte needs more space */
 	reg = <0x0 0x86800000 0x0 0x5400000>;
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi b/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi
index b438fa81886..e7f265e3c2a 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi
@@ -15,6 +15,12 @@
 		interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>;
 		pinctrl-0 = <&muic_int_default>;
 		pinctrl-names = "default";
+
+		usb_con: connector {
+			compatible = "usb-b-connector";
+			label = "micro-USB";
+			type = "micro";
+		};
 	};
 };
 
@@ -26,3 +32,15 @@
 &clk_pwm_backlight {
 	status = "disabled";
 };
+
+&s3fwrn5_nfc {
+	status = "okay";
+};
+
+&st_accel {
+	compatible = "st,lis2hh12";
+	mount-matrix = "1",  "0", "0",
+		       "0", "-1", "0",
+		       "0",  "0", "1";
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa.dts b/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa.dts
index ebaa13c6b01..1981bb71f6a 100644
--- a/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa.dts
+++ b/dts/upstream/src/arm64/qcom/msm8916-samsung-rossa.dts
@@ -10,6 +10,12 @@
 	chassis-type = "handset";
 };
 
+&battery {
+	charge-term-current-microamp = <150000>;
+	constant-charge-current-max-microamp = <700000>;
+	constant-charge-voltage-max-microvolt = <4400000>;
+};
+
 &mpss_mem {
 	/* Firmware for rossa needs more space */
 	reg = <0x0 0x86800000 0x0 0x5800000>;
diff --git a/dts/upstream/src/arm64/qcom/msm8916.dtsi b/dts/upstream/src/arm64/qcom/msm8916.dtsi
index cedff4166bf..7383bcc603a 100644
--- a/dts/upstream/src/arm64/qcom/msm8916.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8916.dtsi
@@ -308,7 +308,7 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
+			mboxes = <&apcs 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
@@ -360,7 +360,7 @@
 
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 14>;
+		mboxes = <&apcs 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -385,7 +385,7 @@
 
 		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 18>;
+		mboxes = <&apcs 18>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <4>;
@@ -410,8 +410,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-3 = <&apcs 8 19>;
+		mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
@@ -1978,7 +1977,7 @@
 				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
 
 				qcom,smd-edge = <0>;
-				qcom,ipc = <&apcs 8 12>;
+				mboxes = <&apcs 12>;
 				qcom,remote-pid = <1>;
 
 				label = "hexagon";
@@ -2459,7 +2458,7 @@
 			smd-edge {
 				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
 
-				qcom,ipc = <&apcs 8 17>;
+				mboxes = <&apcs 17>;
 				qcom,smd-edge = <6>;
 				qcom,remote-pid = <4>;
 
@@ -2626,7 +2625,6 @@
 	thermal-zones {
 		cpu0-1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -2656,7 +2654,6 @@
 
 		cpu2-3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -2686,7 +2683,6 @@
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -2713,7 +2709,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -2728,7 +2723,6 @@
 
 		modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
diff --git a/dts/upstream/src/arm64/qcom/msm8939-samsung-a7.dts b/dts/upstream/src/arm64/qcom/msm8939-samsung-a7.dts
index 0c599e71a46..91acdb16022 100644
--- a/dts/upstream/src/arm64/qcom/msm8939-samsung-a7.dts
+++ b/dts/upstream/src/arm64/qcom/msm8939-samsung-a7.dts
@@ -33,6 +33,15 @@
 		};
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		charge-term-current-microamp = <150000>;
+		constant-charge-current-max-microamp = <1500000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		precharge-current-microamp = <450000>;
+		precharge-upper-limit-microvolt = <3500000>;
+	};
+
 	gpio-hall-sensor {
 		compatible = "gpio-keys";
 
@@ -82,7 +91,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		battery@35 {
+		fuel-gauge@35 {
 			compatible = "richtek,rt5033-battery";
 			reg = <0x35>;
 
@@ -91,6 +100,8 @@
 
 			pinctrl-0 = <&fg_alert_default>;
 			pinctrl-names = "default";
+
+			power-supplies = <&charger>;
 		};
 	};
 
@@ -325,6 +336,42 @@
 	};
 };
 
+&blsp_i2c6 {
+	status = "okay";
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&pmic_int_default>;
+		pinctrl-names = "default";
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+
+			/*
+			 * Needed for camera, but not used yet.
+			 * Define empty nodes to allow disabling the unused
+			 * regulators.
+			 */
+			LDO {};
+			BUCK {};
+		};
+
+		charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
+	};
+};
+
 &blsp_uart2 {
 	status = "okay";
 };
@@ -510,6 +557,13 @@
 		bias-disable;
 	};
 
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	reg_tsp_en_default: reg-tsp-en-default-state {
 		pins = "gpio73";
 		function = "gpio";
diff --git a/dts/upstream/src/arm64/qcom/msm8939.dtsi b/dts/upstream/src/arm64/qcom/msm8939.dtsi
index dd45975682b..46d9480cd46 100644
--- a/dts/upstream/src/arm64/qcom/msm8939.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8939.dtsi
@@ -248,7 +248,7 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs1_mbox 8 0>;
+			mboxes = <&apcs1_mbox 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
@@ -443,8 +443,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs1_mbox 8 13>;
-		qcom,ipc-3 = <&apcs1_mbox 8 19>;
+		mboxes = <0>, <&apcs1_mbox 13>, <0>, <&apcs1_mbox 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
@@ -2067,7 +2066,7 @@
 
 			smd-edge {
 				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
-				qcom,ipc = <&apcs1_mbox 8 17>;
+				mboxes = <&apcs1_mbox 17>;
 				qcom,smd-edge = <6>;
 				qcom,remote-pid = <4>;
 
@@ -2299,7 +2298,6 @@
 	thermal_zones: thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -2330,7 +2328,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -2361,7 +2358,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -2392,7 +2388,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -2423,7 +2418,6 @@
 
 		cpu4567-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 9>;
 
@@ -2454,7 +2448,6 @@
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 3>;
 
@@ -2482,7 +2475,6 @@
 
 		modem1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -2497,7 +2489,6 @@
 
 		modem2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -2512,7 +2503,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 
diff --git a/dts/upstream/src/arm64/qcom/msm8953-motorola-potter.dts b/dts/upstream/src/arm64/qcom/msm8953-motorola-potter.dts
index 711d84dad9d..2edf804eb7c 100644
--- a/dts/upstream/src/arm64/qcom/msm8953-motorola-potter.dts
+++ b/dts/upstream/src/arm64/qcom/msm8953-motorola-potter.dts
@@ -301,5 +301,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/dts/upstream/src/arm64/qcom/msm8953-xiaomi-daisy.dts b/dts/upstream/src/arm64/qcom/msm8953-xiaomi-daisy.dts
index a5957e79b81..336b916729e 100644
--- a/dts/upstream/src/arm64/qcom/msm8953-xiaomi-daisy.dts
+++ b/dts/upstream/src/arm64/qcom/msm8953-xiaomi-daisy.dts
@@ -321,5 +321,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/dts/upstream/src/arm64/qcom/msm8953-xiaomi-mido.dts b/dts/upstream/src/arm64/qcom/msm8953-xiaomi-mido.dts
index 6b9245cd8b0..bdf1bfc79c5 100644
--- a/dts/upstream/src/arm64/qcom/msm8953-xiaomi-mido.dts
+++ b/dts/upstream/src/arm64/qcom/msm8953-xiaomi-mido.dts
@@ -326,5 +326,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/dts/upstream/src/arm64/qcom/msm8953-xiaomi-tissot.dts b/dts/upstream/src/arm64/qcom/msm8953-xiaomi-tissot.dts
index 9ac4f507e32..fccb9c4360c 100644
--- a/dts/upstream/src/arm64/qcom/msm8953-xiaomi-tissot.dts
+++ b/dts/upstream/src/arm64/qcom/msm8953-xiaomi-tissot.dts
@@ -322,5 +322,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/dts/upstream/src/arm64/qcom/msm8953-xiaomi-vince.dts b/dts/upstream/src/arm64/qcom/msm8953-xiaomi-vince.dts
index b0588f30f8f..d46325e7991 100644
--- a/dts/upstream/src/arm64/qcom/msm8953-xiaomi-vince.dts
+++ b/dts/upstream/src/arm64/qcom/msm8953-xiaomi-vince.dts
@@ -357,5 +357,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/dts/upstream/src/arm64/qcom/msm8953.dtsi b/dts/upstream/src/arm64/qcom/msm8953.dtsi
index 5d818fe057d..a4bfb624fb8 100644
--- a/dts/upstream/src/arm64/qcom/msm8953.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8953.dtsi
@@ -195,7 +195,7 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
+			mboxes = <&apcs 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
@@ -361,7 +361,7 @@
 
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 14>;
+		mboxes = <&apcs 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -386,7 +386,7 @@
 
 		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 18>;
+		mboxes = <&apcs 18>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <4>;
@@ -411,8 +411,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-3 = <&apcs 8 19>;
+		mboxes = <0>, <&apcs 13>, <0>, <&apcs 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
@@ -1267,7 +1266,7 @@
 				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
 
 				qcom,smd-edge = <0>;
-				qcom,ipc = <&apcs 8 12>;
+				mboxes = <&apcs 12>;
 				qcom,remote-pid = <1>;
 
 				label = "modem";
@@ -1748,7 +1747,7 @@
 			smd-edge {
 				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
 
-				qcom,ipc = <&apcs 8 17>;
+				mboxes = <&apcs 17>;
 				qcom,smd-edge = <6>;
 				qcom,remote-pid = <4>;
 
@@ -1968,8 +1967,9 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens0 9>;
+
 			trips {
 				cpu0_alert: trip-point0 {
 					temperature = <80000>;
@@ -1991,8 +1991,9 @@
 		};
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens0 10>;
+
 			trips {
 				cpu1_alert: trip-point0 {
 					temperature = <80000>;
@@ -2014,8 +2015,9 @@
 		};
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens0 11>;
+
 			trips {
 				cpu2_alert: trip-point0 {
 					temperature = <80000>;
@@ -2037,8 +2039,9 @@
 		};
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens0 12>;
+
 			trips {
 				cpu3_alert: trip-point0 {
 					temperature = <80000>;
@@ -2060,7 +2063,6 @@
 		};
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens0 4>;
 			trips {
 				cpu4_alert: trip-point0 {
@@ -2083,7 +2085,6 @@
 		};
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens0 5>;
 			trips {
 				cpu5_alert: trip-point0 {
@@ -2106,7 +2107,6 @@
 		};
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens0 6>;
 			trips {
 				cpu6_alert: trip-point0 {
@@ -2129,7 +2129,6 @@
 		};
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens0 7>;
 			trips {
 				cpu7_alert: trip-point0 {
@@ -2153,7 +2152,6 @@
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens0 15>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/msm8956.dtsi b/dts/upstream/src/arm64/qcom/msm8956.dtsi
index 668e05185c2..fa36b62156b 100644
--- a/dts/upstream/src/arm64/qcom/msm8956.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8956.dtsi
@@ -8,8 +8,8 @@
 
 #include "msm8976.dtsi"
 
-&pmu {
-	interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+&pmu_a72 {
+	interrupts = <GIC_PPI 7 (GIC_CPU_MASK_RAW(0x30) | IRQ_TYPE_LEVEL_HIGH)>;
 };
 
 &tsens {
diff --git a/dts/upstream/src/arm64/qcom/msm8976.dtsi b/dts/upstream/src/arm64/qcom/msm8976.dtsi
index d2bb1ada361..d62dcb76fa4 100644
--- a/dts/upstream/src/arm64/qcom/msm8976.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8976.dtsi
@@ -222,11 +222,17 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
-	pmu: pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	pmu_a72: pmu-a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_RAW(0xf0) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -237,7 +243,7 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
+			mboxes = <&apcs 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
@@ -361,7 +367,7 @@
 	smp2p-hexagon {
 		compatible = "qcom,smp2p";
 		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
-		qcom,ipc = <&apcs 8 10>;
+		mboxes = <&apcs 10>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <2>;
@@ -384,7 +390,7 @@
 	smp2p-modem {
 		compatible = "qcom,smp2p";
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
-		qcom,ipc = <&apcs 8 14>;
+		mboxes = <&apcs 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -407,7 +413,7 @@
 	smp2p-wcnss {
 		compatible = "qcom,smp2p";
 		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-		qcom,ipc = <&apcs 8 18>;
+		mboxes = <&apcs 18>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <4>;
@@ -433,9 +439,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-2 = <&apcs 8 9>;
-		qcom,ipc-3 = <&apcs 8 19>;
+		mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>;
 
 		apps_smsm: apps@0 {
 			reg = <0>;
@@ -771,6 +775,36 @@
 				drive-strength = <2>;
 				bias-disable;
 			};
+
+			wcss_wlan_default: wcss-wlan-default-state  {
+				wcss-wlan2-pins {
+					pins = "gpio40";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio41";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio42";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan-pins {
+					pins = "gpio43", "gpio44";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@1800000 {
@@ -785,10 +819,10 @@
 
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>;
 			clock-names = "xo",
 				      "xo_a",
 				      "dsi0pll",
@@ -808,6 +842,430 @@
 			reg = <0x01937000 0x30000>;
 		};
 
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8976-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>,
+					 <&gcc GCC_MDP_TBU_CLK>,
+					 <&gcc GCC_MDP_RT_TBU_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync",
+					      "tbu",
+					      "tbu_rt";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				iommus = <&apps_iommu 22>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-177780000 {
+						opp-hz = /bits/ 64 <177780000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-320000000 {
+						opp-hz = /bits/ 64 <320000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+
+					opp-360000000 {
+						opp-hz = /bits/ 64 <360000000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
+						  <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdss_mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-161250000 {
+						opp-hz = /bits/ 64 <161250000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi1: dsi@1a96000 {
+				compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a96000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				assigned-clocks = <&gcc GCC_MDSS_BYTE1_CLK_SRC>,
+						  <&gcc GCC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&gcc MDSS_GDSC>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdss_mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94a00 {
+				compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1_phy: phy@1a96a00 {
+				compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
+				reg = <0x01a96a00 0xd4>,
+				      <0x01a96400 0x280>,
+				      <0x01a96b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		adreno_gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-510.0", "qcom,adreno";
+
+			reg = <0x01c00000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&gcc GCC_GFX3D_OXILI_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_AHB_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_GMEM_CLK>,
+				 <&gcc GCC_GFX3D_BIMC_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_TIMER_CLK>,
+				 <&gcc GCC_GFX3D_OXILI_AON_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem",
+				      "mem_iface",
+				      "rbbmtimer",
+				      "alwayson";
+
+			power-domains = <&gcc OXILI_GX_GDSC>;
+
+			iommus = <&gpu_iommu 0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-540000000 {
+					opp-hz = /bits/ 64 <540000000>;
+					required-opps = <&rpmpd_opp_turbo>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					required-opps = <&rpmpd_opp_turbo>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+		};
+
+		apps_iommu: iommu@1ee0000 {
+			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
+			reg = <0x01ee0000 0x3000>;
+			ranges  = <0 0x01e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x15000 0x1000>;
+				qcom,ctx-asid = <20>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x16000 0x1000>;
+				qcom,ctx-asid = <21>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP0 */
+			iommu-ctx@17000 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x17000 0x1000>;
+				qcom,ctx-asid = <22>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			compatible = "qcom,msm8976-iommu", "qcom,msm-iommu-v2";
+			ranges = <0 0x01f08000 0x8000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX3D_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			power-domains = <&gcc OXILI_CX_GDSC>;
+
+			qcom,iommu-secure-id = <18>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+
+			/* gfx3d user */
+			iommu-ctx@0 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x0 0x1000>;
+				qcom,ctx-asid = <0>;
+				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* gfx3d secure */
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v2-sec";
+				reg = <0x1000 0x1000>;
+				qcom,ctx-asid = <2>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* gfx3d priv */
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v2-sec";
+				reg = <0x2000 0x1000>;
+				qcom,ctx-asid = <1>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		spmi_bus: spmi@200f000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0200f000 0x1000>,
@@ -1034,6 +1492,81 @@
 			status = "disabled";
 		};
 
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu",
+				    "dxe",
+				    "pmu";
+
+			memory-region = <&wcnss_fw_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			power-domains = <&rpmpd MSM8976_VDDCX>,
+					<&rpmpd MSM8976_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-0 = <&wcss_wlan_default>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>,
+								   <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
@@ -1124,7 +1657,6 @@
 	thermal-zones {
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -1139,7 +1671,6 @@
 
 		modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 			trips {
@@ -1153,7 +1684,6 @@
 
 		qdsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 			trips {
@@ -1167,7 +1697,6 @@
 
 		cam-isp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 3>;
 			trips {
@@ -1181,7 +1710,7 @@
 
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 4>;
 
 			trips {
@@ -1205,7 +1734,7 @@
 
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 5>;
 
 			trips {
@@ -1229,7 +1758,7 @@
 
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 6>;
 
 			trips {
@@ -1253,7 +1782,7 @@
 
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 7>;
 
 			trips {
@@ -1277,7 +1806,7 @@
 
 		big-l2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 8>;
 
 			trips {
@@ -1301,7 +1830,7 @@
 
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 9>;
 
 			trips {
@@ -1325,7 +1854,7 @@
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+
 			thermal-sensors = <&tsens 10>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/msm8994.dtsi b/dts/upstream/src/arm64/qcom/msm8994.dtsi
index 695e541832a..917fa246857 100644
--- a/dts/upstream/src/arm64/qcom/msm8994.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8994.dtsi
@@ -183,7 +183,7 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
+			mboxes = <&apcs 0>;
 			qcom,smd-edge = <15>;
 			qcom,remote-pid = <6>;
 
@@ -300,7 +300,7 @@
 
 		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 10>;
+		mboxes = <&apcs 10>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <2>;
@@ -325,7 +325,7 @@
 		interrupt-parent = <&intc>;
 		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 
-		qcom,ipc = <&apcs 8 14>;
+		mboxes = <&apcs 14>;
 
 		qcom,local-pid = <0>;
 		qcom,remote-pid = <1>;
@@ -1093,10 +1093,10 @@
 
 	timer: timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 2 0xff08>,
-			     <GIC_PPI 3 0xff08>,
-			     <GIC_PPI 4 0xff08>,
-			     <GIC_PPI 1 0xff08>;
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	vph_pwr: vph-pwr-regulator {
diff --git a/dts/upstream/src/arm64/qcom/msm8996-xiaomi-common.dtsi b/dts/upstream/src/arm64/qcom/msm8996-xiaomi-common.dtsi
index 5ab583be9e0..0386636a29f 100644
--- a/dts/upstream/src/arm64/qcom/msm8996-xiaomi-common.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8996-xiaomi-common.dtsi
@@ -405,7 +405,6 @@
 
 &hsusb_phy1 {
 	status = "okay";
-	extcon = <&typec>;
 
 	vdda-pll-supply = <&vreg_l12a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
diff --git a/dts/upstream/src/arm64/qcom/msm8996.dtsi b/dts/upstream/src/arm64/qcom/msm8996.dtsi
index 8d2cb6f4109..0fd2b1b944a 100644
--- a/dts/upstream/src/arm64/qcom/msm8996.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8996.dtsi
@@ -982,6 +982,8 @@
 				 <&mmcc MDSS_MDP_CLK>;
 			clock-names = "iface", "core";
 
+			resets = <&mmcc MDSS_BCR>;
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -2077,24 +2079,20 @@
 			power-domains = <&gcc UFS_GDSC>;
 
 			clock-names =
-				"core_clk_src",
 				"core_clk",
 				"bus_clk",
 				"bus_aggr_clk",
 				"iface_clk",
-				"core_clk_unipro_src",
 				"core_clk_unipro",
 				"core_clk_ice",
 				"ref_clk",
 				"tx_lane0_sync_clk",
 				"rx_lane0_sync_clk";
 			clocks =
-				<&gcc UFS_AXI_CLK_SRC>,
 				<&gcc GCC_UFS_AXI_CLK>,
 				<&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
 				<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				<&gcc GCC_UFS_AHB_CLK>,
-				<&gcc UFS_ICE_CORE_CLK_SRC>,
 				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
 				<&gcc GCC_UFS_ICE_CORE_CLK>,
 				<&rpmcc RPM_SMD_LN_BB_CLK>,
@@ -2105,10 +2103,8 @@
 				<0 0>,
 				<0 0>,
 				<0 0>,
-				<0 0>,
-				<150000000 300000000>,
 				<75000000 150000000>,
-				<0 0>,
+				<150000000 300000000>,
 				<0 0>,
 				<0 0>,
 				<0 0>;
@@ -2483,6 +2479,13 @@
 
 			status = "disabled";
 
+			glink-edge {
+				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apcs_glb 27>;
+			};
+
 			smd-edge {
 				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
 
@@ -2552,6 +2555,13 @@
 				memory-region = <&mdata_mem>;
 			};
 
+			glink-edge {
+				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 15>;
+			};
+
 			smd-edge {
 				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
 
@@ -3091,6 +3101,7 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,is-utmi-l1-suspend;
+				snps,parkmode-disable-ss-quirk;
 				tx-fifo-resize;
 			};
 		};
@@ -3497,6 +3508,14 @@
 
 			status = "disabled";
 
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 9>;
+			};
+
+
 			smd-edge {
 				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
@@ -3553,6 +3572,63 @@
 						};
 					};
 				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,smd-channels = "fastrpcsmd-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&lpass_q6_smmu 5>;
+					};
+
+					cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&lpass_q6_smmu 6>;
+					};
+
+					cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&lpass_q6_smmu 7>;
+					};
+
+					cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&lpass_q6_smmu 8>;
+					};
+
+					cb@9 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <9>;
+						iommus = <&lpass_q6_smmu 9>;
+					};
+
+					cb@10 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <10>;
+						iommus = <&lpass_q6_smmu 10>;
+					};
+
+					cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&lpass_q6_smmu 11>;
+					};
+
+					cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&lpass_q6_smmu 12>;
+					};
+				};
 			};
 		};
 
@@ -3654,7 +3730,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -3675,7 +3750,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -3696,7 +3770,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -3717,7 +3790,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -3738,7 +3810,6 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -3760,7 +3831,6 @@
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -3782,7 +3852,6 @@
 
 		m4m-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -3797,7 +3866,6 @@
 
 		l3-or-venus-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -3812,7 +3880,6 @@
 
 		cluster0-l2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -3827,7 +3894,6 @@
 
 		cluster1-l2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -3842,7 +3908,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -3857,7 +3922,6 @@
 
 		q6-dsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -3872,7 +3936,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -3887,7 +3950,6 @@
 
 		modemtx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
diff --git a/dts/upstream/src/arm64/qcom/msm8998.dtsi b/dts/upstream/src/arm64/qcom/msm8998.dtsi
index d795b2bbe13..7f44807b1b9 100644
--- a/dts/upstream/src/arm64/qcom/msm8998.dtsi
+++ b/dts/upstream/src/arm64/qcom/msm8998.dtsi
@@ -488,7 +488,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -509,7 +508,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -530,7 +528,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -551,7 +548,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -572,7 +568,6 @@
 
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -593,7 +588,6 @@
 
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -614,7 +608,6 @@
 
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -635,7 +628,6 @@
 
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -656,7 +648,6 @@
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -671,7 +662,6 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -686,7 +676,6 @@
 
 		clust0-mhm-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -701,7 +690,6 @@
 
 		clust1-mhm-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -716,7 +704,6 @@
 
 		cluster1-l2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -731,7 +718,6 @@
 
 		modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -746,7 +732,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -761,7 +746,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -776,7 +760,6 @@
 
 		q6-dsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -791,7 +774,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -806,7 +788,6 @@
 
 		multimedia-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -1590,7 +1571,6 @@
 			 * SoC VDDMX RPM Power Domain in the Adreno driver.
 			 */
 			power-domains = <&gpucc GPU_GX_GDSC>;
-			status = "disabled";
 		};
 
 		gpucc: clock-controller@5065000 {
@@ -2164,6 +2144,7 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
@@ -3020,6 +3001,54 @@
 			};
 		};
 
+		venus: video-codec@cc00000 {
+			compatible = "qcom,msm8998-venus";
+			reg = <0x0cc00000 0xff000>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc VIDEO_TOP_GDSC>;
+			clocks = <&mmcc VIDEO_CORE_CLK>,
+				 <&mmcc VIDEO_AHB_CLK>,
+				 <&mmcc VIDEO_AXI_CLK>,
+				 <&mmcc VIDEO_MAXI_CLK>;
+			clock-names = "core", "iface", "bus", "mbus";
+			iommus = <&mmss_smmu 0x400>,
+				 <&mmss_smmu 0x401>,
+				 <&mmss_smmu 0x40a>,
+				 <&mmss_smmu 0x407>,
+				 <&mmss_smmu 0x40e>,
+				 <&mmss_smmu 0x40f>,
+				 <&mmss_smmu 0x408>,
+				 <&mmss_smmu 0x409>,
+				 <&mmss_smmu 0x40b>,
+				 <&mmss_smmu 0x40c>,
+				 <&mmss_smmu 0x40d>,
+				 <&mmss_smmu 0x410>,
+				 <&mmss_smmu 0x421>,
+				 <&mmss_smmu 0x428>,
+				 <&mmss_smmu 0x429>,
+				 <&mmss_smmu 0x42b>,
+				 <&mmss_smmu 0x42c>,
+				 <&mmss_smmu 0x42d>,
+				 <&mmss_smmu 0x411>,
+				 <&mmss_smmu 0x431>;
+			memory-region = <&venus_mem>;
+			status = "disabled";
+
+			video-decoder {
+				compatible = "venus-decoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VIDEO_SUBCORE0_GDSC>;
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+				clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VIDEO_SUBCORE1_GDSC>;
+			};
+		};
+
 		mmss_smmu: iommu@cd00000 {
 			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
 			reg = <0x0cd00000 0x40000>;
@@ -3195,6 +3224,7 @@
 			iommus = <&anoc2_smmu 0x1900>,
 				 <&anoc2_smmu 0x1901>;
 			qcom,snoc-host-cap-8bit-quirk;
+			qcom,no-msa-ready-indicator;
 		};
 	};
 };
diff --git a/dts/upstream/src/arm64/qcom/pm6125.dtsi b/dts/upstream/src/arm64/qcom/pm6125.dtsi
index 99369a0cdb6..d0db28336fa 100644
--- a/dts/upstream/src/arm64/qcom/pm6125.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm6125.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm6125-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6125_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm6150.dtsi b/dts/upstream/src/arm64/qcom/pm6150.dtsi
index 6de6ed562d9..59524609fb1 100644
--- a/dts/upstream/src/arm64/qcom/pm6150.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm6150.dtsi
@@ -13,7 +13,7 @@
 	thermal-zones {
 		pm6150_thermal: pm6150-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm6150_temp>;
 
 			trips {
@@ -166,5 +166,11 @@
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pm6150_vib: vibrator@5300 {
+			compatible = "qcom,pm6150-vib", "qcom,pmi632-vib";
+			reg = <0x5300>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/dts/upstream/src/arm64/qcom/pm6150l.dtsi b/dts/upstream/src/arm64/qcom/pm6150l.dtsi
index 0fce45276e5..334f976f115 100644
--- a/dts/upstream/src/arm64/qcom/pm6150l.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm6150l.dtsi
@@ -10,9 +10,6 @@
 / {
 	thermal-zones {
 		pm6150l-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm6150l_temp>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/pm6350.dtsi b/dts/upstream/src/arm64/qcom/pm6350.dtsi
index 3a2a841e83f..a20ee245710 100644
--- a/dts/upstream/src/arm64/qcom/pm6350.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm6350.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm6350-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6350_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm660.dtsi b/dts/upstream/src/arm64/qcom/pm660.dtsi
index 98dc04962fe..156b2ddff0d 100644
--- a/dts/upstream/src/arm64/qcom/pm660.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm660.dtsi
@@ -13,7 +13,6 @@
 	thermal-zones {
 		pm660-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&pm660_temp>;
 
@@ -74,6 +73,23 @@
 			};
 		};
 
+		pm660_charger: charger@1000 {
+			compatible = "qcom,pm660-charger";
+			reg = <0x1000>;
+
+			interrupts = <0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+			io-channels = <&pm660_rradc 3>,
+				      <&pm660_rradc 4>;
+			io-channel-names = "usbin_i", "usbin_v";
+
+			status = "disabled";
+		};
+
 		pm660_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
@@ -181,6 +197,14 @@
 			};
 		};
 
+		pm660_rradc: adc@4500 {
+			compatible = "qcom,pm660-rradc";
+			reg = <0x4500>;
+			#io-channel-cells = <1>;
+
+			status = "disabled";
+		};
+
 		pm660_gpios: gpio@c000 {
 			compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
diff --git a/dts/upstream/src/arm64/qcom/pm660l.dtsi b/dts/upstream/src/arm64/qcom/pm660l.dtsi
index 6fdbf507c26..0094e0ef058 100644
--- a/dts/upstream/src/arm64/qcom/pm660l.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm660l.dtsi
@@ -13,7 +13,6 @@
 	thermal-zones {
 		pm660l-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&pm660l_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm7250b.dtsi b/dts/upstream/src/arm64/qcom/pm7250b.dtsi
index 3bf7cf5d170..0761e6b5fd8 100644
--- a/dts/upstream/src/arm64/qcom/pm7250b.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm7250b.dtsi
@@ -11,7 +11,6 @@
 	thermal-zones {
 		pm7250b-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm7250b_temp>;
 
@@ -45,6 +44,52 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm7250b_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg";
+			reg = <0x1100>;
+			status = "disabled";
+		};
+
+		pm7250b_typec: typec@1500 {
+			compatible = "qcom,pm7250b-typec", "qcom,pm8150b-typec";
+			reg = <0x1500>,
+			      <0x1700>;
+			interrupts = <PM7250B_SID 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <PM7250B_SID 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <PM7250B_SID 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <PM7250B_SID 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
+				     <PM7250B_SID 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect",
+					  "sig-tx",
+					  "sig-rx",
+					  "msg-tx",
+					  "msg-rx",
+					  "msg-tx-failed",
+					  "msg-tx-discarded",
+					  "msg-rx-discarded",
+					  "fr-swap";
+			vdd-vbus-supply = <&pm7250b_vbus>;
+			status = "disabled";
+		};
+
 		pm7250b_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
diff --git a/dts/upstream/src/arm64/qcom/pm7325.dtsi b/dts/upstream/src/arm64/qcom/pm7325.dtsi
index d1c5476af5e..6e29468505b 100644
--- a/dts/upstream/src/arm64/qcom/pm7325.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm7325.dtsi
@@ -35,7 +35,7 @@
 &thermal_zones {
 	pm7325_thermal: pm7325-thermal {
 		polling-delay-passive = <100>;
-		polling-delay = <0>;
+
 		thermal-sensors = <&pm7325_temp_alarm>;
 
 		trips {
diff --git a/dts/upstream/src/arm64/qcom/pm7550ba.dtsi b/dts/upstream/src/arm64/qcom/pm7550ba.dtsi
index 8b00ece987d..853a1d83a7f 100644
--- a/dts/upstream/src/arm64/qcom/pm7550ba.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm7550ba.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm7550ba-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm7550ba_temp_alarm>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8010.dtsi b/dts/upstream/src/arm64/qcom/pm8010.dtsi
index 0ea641e1220..ef330194946 100644
--- a/dts/upstream/src/arm64/qcom/pm8010.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8010.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8010-m-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8010_m_temp_alarm>;
 
@@ -31,7 +30,6 @@
 
 		pm8010-n-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8010_n_temp_alarm>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8150.dtsi b/dts/upstream/src/arm64/qcom/pm8150.dtsi
index 3ba3ba5d8fc..a74a7ff660d 100644
--- a/dts/upstream/src/arm64/qcom/pm8150.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8150.dtsi
@@ -13,7 +13,6 @@
 	thermal-zones {
 		pm8150-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8150_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8150b.dtsi b/dts/upstream/src/arm64/qcom/pm8150b.dtsi
index 1aee3270ce7..3f7b0b6a1d1 100644
--- a/dts/upstream/src/arm64/qcom/pm8150b.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8150b.dtsi
@@ -12,7 +12,6 @@
 	thermal-zones {
 		pm8150b-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8150b_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8150l.dtsi b/dts/upstream/src/arm64/qcom/pm8150l.dtsi
index ac08a09c64c..3911d6d0d2e 100644
--- a/dts/upstream/src/arm64/qcom/pm8150l.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8150l.dtsi
@@ -12,7 +12,6 @@
 	thermal-zones {
 		pm8150l-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8150l_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8350.dtsi b/dts/upstream/src/arm64/qcom/pm8350.dtsi
index 9ed9ba23e81..cb55b23688d 100644
--- a/dts/upstream/src/arm64/qcom/pm8350.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8350.dtsi
@@ -10,7 +10,7 @@
 	thermal-zones {
 		pm8350_thermal: pm8350-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm8350_temp_alarm>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/pm8350b.dtsi b/dts/upstream/src/arm64/qcom/pm8350b.dtsi
index 05c10589889..cf82f8a64a9 100644
--- a/dts/upstream/src/arm64/qcom/pm8350b.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8350b.dtsi
@@ -10,7 +10,7 @@
 	thermal-zones {
 		pm8350b_thermal: pm8350b-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm8350b_temp_alarm>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/pm8350c.dtsi b/dts/upstream/src/arm64/qcom/pm8350c.dtsi
index aa74e21fe0d..1a24e6439e3 100644
--- a/dts/upstream/src/arm64/qcom/pm8350c.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8350c.dtsi
@@ -48,7 +48,7 @@
 	thermal-zones {
 		pm8350c_thermal: pm8350c-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm8350c_temp_alarm>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/pm8450.dtsi b/dts/upstream/src/arm64/qcom/pm8450.dtsi
index ae5bce3cf46..decb8809fd3 100644
--- a/dts/upstream/src/arm64/qcom/pm8450.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8450.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8450-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8450_temp_alarm>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8550.dtsi b/dts/upstream/src/arm64/qcom/pm8550.dtsi
index 797a18c249a..896bcacb649 100644
--- a/dts/upstream/src/arm64/qcom/pm8550.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8550.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8550-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550_temp_alarm>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8550b.dtsi b/dts/upstream/src/arm64/qcom/pm8550b.dtsi
index 72609f31c89..74d23b8970f 100644
--- a/dts/upstream/src/arm64/qcom/pm8550b.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8550b.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8550b-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550b_temp_alarm>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8550ve.dtsi b/dts/upstream/src/arm64/qcom/pm8550ve.dtsi
index 4dc1f03ab2c..9d4734eabf5 100644
--- a/dts/upstream/src/arm64/qcom/pm8550ve.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8550ve.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8550ve-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550ve_temp_alarm>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8550vs.dtsi b/dts/upstream/src/arm64/qcom/pm8550vs.dtsi
index 97b1c18aa7d..6426b431616 100644
--- a/dts/upstream/src/arm64/qcom/pm8550vs.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8550vs.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pm8550vs-c-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550vs_c_temp_alarm>;
 
@@ -31,7 +30,6 @@
 
 		pm8550vs-d-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550vs_d_temp_alarm>;
 
@@ -52,7 +50,6 @@
 
 		pm8550vs-e-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550vs_e_temp_alarm>;
 
@@ -73,7 +70,6 @@
 
 		pm8550vs-g-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm8550vs_g_temp_alarm>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8916.dtsi b/dts/upstream/src/arm64/qcom/pm8916.dtsi
index 4b2e8fb47d2..f8e4829ff7f 100644
--- a/dts/upstream/src/arm64/qcom/pm8916.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8916.dtsi
@@ -4,8 +4,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
-&spmi_bus {
+/ {
+	thermal-zones {
+		pm8916-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8916_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
 
+&spmi_bus {
 	pm8916_0: pmic@0 {
 		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
diff --git a/dts/upstream/src/arm64/qcom/pm8953.dtsi b/dts/upstream/src/arm64/qcom/pm8953.dtsi
index 1067e141be6..64258505f9b 100644
--- a/dts/upstream/src/arm64/qcom/pm8953.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8953.dtsi
@@ -9,9 +9,6 @@
 / {
 	thermal-zones {
 		pm8953-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm8953_temp>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/pm8994.dtsi b/dts/upstream/src/arm64/qcom/pm8994.dtsi
index d44a95caf04..353e4a6bd08 100644
--- a/dts/upstream/src/arm64/qcom/pm8994.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8994.dtsi
@@ -8,7 +8,6 @@
 	thermal-zones {
 		pm8994-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&pm8994_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pm8998.dtsi b/dts/upstream/src/arm64/qcom/pm8998.dtsi
index 3f82715392c..3ecb330590e 100644
--- a/dts/upstream/src/arm64/qcom/pm8998.dtsi
+++ b/dts/upstream/src/arm64/qcom/pm8998.dtsi
@@ -11,7 +11,6 @@
 	thermal-zones {
 		pm8998-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&pm8998_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pmi632.dtsi b/dts/upstream/src/arm64/qcom/pmi632.dtsi
index 94d53b1cf6c..8c899d148e4 100644
--- a/dts/upstream/src/arm64/qcom/pmi632.dtsi
+++ b/dts/upstream/src/arm64/qcom/pmi632.dtsi
@@ -11,7 +11,6 @@
 	thermal-zones {
 		pmi632-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmi632_temp>;
 
@@ -200,5 +199,11 @@
 
 			status = "disabled";
 		};
+
+		pmi632_vib: vibrator@5700 {
+			compatible = "qcom,pmi632-vib";
+			reg = <0x5700>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/dts/upstream/src/arm64/qcom/pmi8950.dtsi b/dts/upstream/src/arm64/qcom/pmi8950.dtsi
index 1029f3b1bb9..b4822cb17a3 100644
--- a/dts/upstream/src/arm64/qcom/pmi8950.dtsi
+++ b/dts/upstream/src/arm64/qcom/pmi8950.dtsi
@@ -84,6 +84,14 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmi8950_pwm: pwm@b000 {
+			compatible = "qcom,pmi8950-pwm";
+			reg = <0xb000 0x100>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
 		pmi8950_wled: leds@d800 {
 			compatible = "qcom,pmi8950-wled";
 			reg = <0xd800>, <0xd900>;
diff --git a/dts/upstream/src/arm64/qcom/pmm8155au_1.dtsi b/dts/upstream/src/arm64/qcom/pmm8155au_1.dtsi
index dbd4b91dfe0..5084de66fc4 100644
--- a/dts/upstream/src/arm64/qcom/pmm8155au_1.dtsi
+++ b/dts/upstream/src/arm64/qcom/pmm8155au_1.dtsi
@@ -12,7 +12,6 @@
 	thermal-zones {
 		pmm8155au-1-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmm8155au_1_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pmm8155au_2.dtsi b/dts/upstream/src/arm64/qcom/pmm8155au_2.dtsi
index 1cee20ac2c9..555e4a456ef 100644
--- a/dts/upstream/src/arm64/qcom/pmm8155au_2.dtsi
+++ b/dts/upstream/src/arm64/qcom/pmm8155au_2.dtsi
@@ -11,7 +11,6 @@
 	thermal-zones {
 		pmm8155au-2-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmm8155au_2_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pmr735a.dtsi b/dts/upstream/src/arm64/qcom/pmr735a.dtsi
index febda50779f..f8efd8e5e68 100644
--- a/dts/upstream/src/arm64/qcom/pmr735a.dtsi
+++ b/dts/upstream/src/arm64/qcom/pmr735a.dtsi
@@ -36,7 +36,7 @@
 	thermal-zones {
 		pmr735a_thermal: pmr735a-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmr735a_temp_alarm>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/pmr735b.dtsi b/dts/upstream/src/arm64/qcom/pmr735b.dtsi
index f7473e24732..09affc05b39 100644
--- a/dts/upstream/src/arm64/qcom/pmr735b.dtsi
+++ b/dts/upstream/src/arm64/qcom/pmr735b.dtsi
@@ -10,7 +10,7 @@
 	thermal-zones {
 		pmr735b_thermal: pmr735b-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmr735b_temp_alarm>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/pmr735d_a.dtsi b/dts/upstream/src/arm64/qcom/pmr735d_a.dtsi
index 37daaefe343..f9f1793d310 100644
--- a/dts/upstream/src/arm64/qcom/pmr735d_a.dtsi
+++ b/dts/upstream/src/arm64/qcom/pmr735d_a.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pmr735d-k-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmr735d_k_temp_alarm>;
 
diff --git a/dts/upstream/src/arm64/qcom/pmr735d_b.dtsi b/dts/upstream/src/arm64/qcom/pmr735d_b.dtsi
index 3b470f6ac46..d91fbd3bff1 100644
--- a/dts/upstream/src/arm64/qcom/pmr735d_b.dtsi
+++ b/dts/upstream/src/arm64/qcom/pmr735d_b.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pmr735d-l-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmr735d_l_temp_alarm>;
 
diff --git a/dts/upstream/src/arm64/qcom/pms405.dtsi b/dts/upstream/src/arm64/qcom/pms405.dtsi
index 461ad97032f..3f9100c7eff 100644
--- a/dts/upstream/src/arm64/qcom/pms405.dtsi
+++ b/dts/upstream/src/arm64/qcom/pms405.dtsi
@@ -12,7 +12,6 @@
 	thermal-zones {
 		pms405-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&pms405_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/pmx75.dtsi b/dts/upstream/src/arm64/qcom/pmx75.dtsi
index 373e45f63df..2e61b7849c9 100644
--- a/dts/upstream/src/arm64/qcom/pmx75.dtsi
+++ b/dts/upstream/src/arm64/qcom/pmx75.dtsi
@@ -10,7 +10,6 @@
 	thermal-zones {
 		pmx75-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmx75_temp_alarm>;
 
diff --git a/dts/upstream/src/arm64/qcom/qcm2290.dtsi b/dts/upstream/src/arm64/qcom/qcm2290.dtsi
index 106110a9f55..8f3be4c75db 100644
--- a/dts/upstream/src/arm64/qcom/qcm2290.dtsi
+++ b/dts/upstream/src/arm64/qcom/qcm2290.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,qcm2290-gpucc.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
@@ -758,6 +759,11 @@
 				reg = <0x25b 0x1>;
 				bits = <1 4>;
 			};
+
+			gpu_speed_bin: gpu-speed-bin@2006 {
+				reg = <0x2006 0x2>;
+				bits = <5 8>;
+			};
 		};
 
 		pmu@1b8e300 {
@@ -1425,6 +1431,154 @@
 			};
 		};
 
+		gpu: gpu@5900000 {
+			compatible = "qcom,adreno-07000200", "qcom,adreno";
+			reg = <0x0 0x05900000 0x0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_BIMC_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "gmu",
+				      "xo";
+
+			interconnects = <&bimc MASTER_GFX3D RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+			interconnect-names = "gfx-mem";
+
+			iommus = <&adreno_smmu 0 1>,
+				 <&adreno_smmu 2 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+			qcom,gmu = <&gmu_wrapper>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* TODO: Scale RPM_SMD_BIMC_GPU_CLK w/ turbo freqs */
+				opp-1123200000 {
+					opp-hz = /bits/ 64 <1123200000>;
+					required-opps = <&rpmpd_opp_turbo_plus>;
+					opp-peak-kBps = <6881000>;
+					opp-supported-hw = <0x3>;
+					turbo-mode;
+				};
+
+				opp-1017600000 {
+					opp-hz = /bits/ 64 <1017600000>;
+					required-opps = <&rpmpd_opp_turbo>;
+					opp-peak-kBps = <6881000>;
+					opp-supported-hw = <0x3>;
+					turbo-mode;
+				};
+
+				opp-921600000 {
+					opp-hz = /bits/ 64 <921600000>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+					opp-peak-kBps = <6881000>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-844800000 {
+					opp-hz = /bits/ 64 <844800000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <6881000>;
+					opp-supported-hw = <0x7>;
+				};
+
+				opp-672000000 {
+					opp-hz = /bits/ 64 <672000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <3879000>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-537600000 {
+					opp-hz = /bits/ 64 <537600000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-peak-kBps = <2929000>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-355200000 {
+					opp-hz = /bits/ 64 <355200000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <1720000>;
+					opp-supported-hw = <0xf>;
+				};
+			};
+		};
+
+		gmu_wrapper: gmu@596a000 {
+			compatible = "qcom,adreno-gmu-wrapper";
+			reg = <0x0 0x0596a000 0x0 0x30000>;
+			reg-names = "gmu";
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+		};
+
+		gpucc: clock-controller@5990000 {
+			compatible = "qcom,qcm2290-gpucc";
+			reg = <0x0 0x05990000 0x0 0x9000>;
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+			required-opps = <&rpmpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@59a0000 {
+			compatible = "qcom,qcm2290-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x059a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "mem",
+				      "hlos",
+				      "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
 		mdss: display-subsystem@5e00000 {
 			compatible = "qcom,qcm2290-mdss";
 			reg = <0x0 0x05e00000 0x0 0x1000>;
@@ -1924,9 +2078,6 @@
 
 	thermal-zones {
 		mapss-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -1951,9 +2102,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -1978,9 +2126,6 @@
 		};
 
 		wlan-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -2005,9 +2150,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -2032,9 +2174,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -2059,9 +2198,6 @@
 		};
 
 		mdm0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -2086,9 +2222,6 @@
 		};
 
 		mdm1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -2113,9 +2246,6 @@
 		};
 
 		gpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -2140,9 +2270,6 @@
 		};
 
 		hm-center-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -2167,9 +2294,6 @@
 		};
 
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/qcm6490-fairphone-fp5.dts b/dts/upstream/src/arm64/qcom/qcm6490-fairphone-fp5.dts
index f3432701945..8ab30c01712 100644
--- a/dts/upstream/src/arm64/qcom/qcm6490-fairphone-fp5.dts
+++ b/dts/upstream/src/arm64/qcom/qcm6490-fairphone-fp5.dts
@@ -167,7 +167,7 @@
 	thermal-zones {
 		camera-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 2>;
 
 			trips {
@@ -181,7 +181,7 @@
 
 		chg-skin-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm7250b_adc_tm 0>;
 
 			trips {
@@ -195,7 +195,7 @@
 
 		conn-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm7250b_adc_tm 1>;
 
 			trips {
@@ -207,9 +207,28 @@
 			};
 		};
 
+		pm8008-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&pm8008>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
 		quiet-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 1>;
 
 			trips {
@@ -223,7 +242,7 @@
 
 		rear-cam-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 4>;
 
 			trips {
@@ -237,7 +256,7 @@
 
 		sdm-skin-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 3>;
 
 			trips {
@@ -251,7 +270,7 @@
 
 		xo-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 0>;
 
 			trips {
@@ -271,46 +290,54 @@
 		qcom,pmic-id = "b";
 
 		vreg_s1b: smps1 {
+			regulator-name = "vreg_s1b";
 			regulator-min-microvolt = <1840000>;
 			regulator-max-microvolt = <2040000>;
 		};
 
 		vreg_s7b: smps7 {
+			regulator-name = "vreg_s7b";
 			regulator-min-microvolt = <535000>;
 			regulator-max-microvolt = <1120000>;
 		};
 
 		vreg_s8b: smps8 {
+			regulator-name = "vreg_s8b";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1500000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
 		};
 
 		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
 			regulator-min-microvolt = <825000>;
 			regulator-max-microvolt = <925000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l2b: ldo2 {
+			regulator-name = "vreg_l2b";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
 			regulator-min-microvolt = <312000>;
 			regulator-max-microvolt = <910000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
 			regulator-min-microvolt = <1140000>;
 			regulator-max-microvolt = <1260000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7b: ldo7 {
+			regulator-name = "vreg_l7b";
 			/* Constrained for UFS VCC, at least until UFS driver scales voltage */
 			regulator-min-microvolt = <2952000>;
 			regulator-max-microvolt = <2952000>;
@@ -318,66 +345,77 @@
 		};
 
 		vreg_l8b: ldo8 {
+			regulator-name = "vreg_l8b";
 			regulator-min-microvolt = <870000>;
 			regulator-max-microvolt = <970000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9b: ldo9 {
+			regulator-name = "vreg_l9b";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11b: ldo11 {
+			regulator-name = "vreg_l11b";
 			regulator-min-microvolt = <1504000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l12b: ldo12 {
+			regulator-name = "vreg_l12b";
 			regulator-min-microvolt = <751000>;
 			regulator-max-microvolt = <824000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13b: ldo13 {
+			regulator-name = "vreg_l13b";
 			regulator-min-microvolt = <530000>;
 			regulator-max-microvolt = <824000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l14b: ldo14 {
+			regulator-name = "vreg_l14b";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l15b: ldo15 {
+			regulator-name = "vreg_l15b";
 			regulator-min-microvolt = <765000>;
 			regulator-max-microvolt = <1020000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l16b: ldo16 {
+			regulator-name = "vreg_l16b";
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l17b: ldo17 {
+			regulator-name = "vreg_l17b";
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l18b: ldo18 {
+			regulator-name = "vreg_l18b";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l19b: ldo19 {
+			regulator-name = "vreg_l19b";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -389,60 +427,70 @@
 		qcom,pmic-id = "c";
 
 		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
 			regulator-min-microvolt = <2190000>;
 			regulator-max-microvolt = <2210000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_s9c: smps9 {
+			regulator-name = "vreg_s9c";
 			regulator-min-microvolt = <1010000>;
 			regulator-max-microvolt = <1170000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1950000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3400000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
 			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -451,36 +499,42 @@
 		};
 
 		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c: ldo10 {
+			regulator-name = "vreg_l10c";
 			regulator-min-microvolt = <720000>;
 			regulator-max-microvolt = <1050000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11c: ldo11 {
+			regulator-name = "vreg_l11c";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
 			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_bob: bob {
+			regulator-name = "vreg_bob";
 			regulator-min-microvolt = <3008000>;
 			regulator-max-microvolt = <3960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
@@ -522,7 +576,76 @@
 &i2c1 {
 	status = "okay";
 
-	/* PM8008 PMIC @ 8 and 9 */
+	pm8008: pmic@8 {
+		compatible = "qcom,pm8008";
+		reg = <0x8>;
+
+		interrupts-extended = <&tlmm 25 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&pm8350c_gpios 3 GPIO_ACTIVE_LOW>;
+
+		vdd-l1-l2-supply = <&vreg_s8b>;
+		vdd-l3-l4-supply = <&vreg_bob>;
+		vdd-l5-supply = <&vreg_bob>;
+		vdd-l6-supply = <&vreg_s1b>;
+		vdd-l7-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm8008_int_default>, <&pm8008_reset_n_default>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pm8008 0 0 2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		#thermal-sensor-cells = <0>;
+
+		regulators {
+			vreg_l1p: ldo1 {
+				regulator-name = "vreg_l1p";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vreg_l2p: ldo2 {
+				regulator-name = "vreg_l2p";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1152000>;
+			};
+
+			vreg_l3p: ldo3 {
+				regulator-name = "vreg_l3p";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vreg_l4p: ldo4 {
+				regulator-name = "vreg_l4p";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2900000>;
+			};
+
+			vreg_l5p: ldo5 {
+				regulator-name = "vreg_l5p";
+				regulator-min-microvolt = <2704000>;
+				regulator-max-microvolt = <2900000>;
+			};
+
+			vreg_l6p: ldo6 {
+				regulator-name = "vreg_l6p";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1904000>;
+			};
+
+			vreg_l7p: ldo7 {
+				regulator-name = "vreg_l7p";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+
 	/* Pixelworks @ 26 */
 	/* FSA4480 USB audio switch @ 42 */
 	/* AW86927FCR haptics @ 5a */
@@ -551,7 +674,7 @@
 &ipa {
 	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
-	firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mdt";
+	firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mbn";
 	status = "okay";
 };
 
@@ -653,6 +776,14 @@
 	};
 };
 
+&pm8350c_gpios {
+	pm8008_reset_n_default: pm8008-reset-n-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-down;
+	};
+};
+
 &pmk8350_rtc {
 	status = "okay";
 };
@@ -810,6 +941,13 @@
 		bias-pull-up;
 	};
 
+	pm8008_int_default: pm8008-int-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
 		pins = "gpio28";
 		function = "gpio";
@@ -864,7 +1002,6 @@
 };
 
 &uart5 {
-	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
 
diff --git a/dts/upstream/src/arm64/qcom/qcm6490-idp.dts b/dts/upstream/src/arm64/qcom/qcm6490-idp.dts
index 47ca2d00034..a0668f767e4 100644
--- a/dts/upstream/src/arm64/qcom/qcm6490-idp.dts
+++ b/dts/upstream/src/arm64/qcom/qcm6490-idp.dts
@@ -658,7 +658,6 @@
 };
 
 &uart5 {
-	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
 
@@ -667,6 +666,7 @@
 };
 
 &usb_1_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
 
diff --git a/dts/upstream/src/arm64/qcom/qcm6490-shift-otter.dts b/dts/upstream/src/arm64/qcom/qcm6490-shift-otter.dts
new file mode 100644
index 00000000000..4667e47a74b
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/qcm6490-shift-otter.dts
@@ -0,0 +1,961 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
+ * Copyright (c) 2024, Caleb Connolly <caleb@postmarketos.org>
+ */
+
+/dts-v1/;
+
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi" /* PM7350C */
+#include "pmk8350.dtsi" /* PMK7325 */
+
+/delete-node/ &rmtfs_mem;
+
+/ {
+	model = "SHIFT SHIFTphone 8";
+	compatible = "shift,otter", "qcom,qcm6490";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart7;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		framebuffer0: framebuffer@a000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xe1000000 0x0 (2400 * 1080 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_down_default>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: cont-splash@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@f8500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8500000 0x0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_s1b: smps1 {
+			regulator-name = "vreg_s1b";
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7b: smps7 {
+			regulator-name = "vreg_s7b";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b: smps8 {
+			regulator-name = "vreg_s8b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b: ldo2 {
+			regulator-name = "vreg_l2b";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b: ldo7 {
+			regulator-name = "vreg_l7b";
+			/* Constrained for UFS VCC, at least until UFS driver scales voltage */
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b: ldo8 {
+			regulator-name = "vreg_l8b";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b: ldo9 {
+			regulator-name = "vreg_l9b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b: ldo11 {
+			regulator-name = "vreg_l11b";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b: ldo12 {
+			regulator-name = "vreg_l12b";
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b: ldo13 {
+			regulator-name = "vreg_l13b";
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b: ldo14 {
+			regulator-name = "vreg_l14b";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b: ldo15 {
+			regulator-name = "vreg_l15b";
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b: ldo16 {
+			regulator-name = "vreg_l16b";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b: ldo17 {
+			regulator-name = "vreg_l17b";
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b: ldo18 {
+			regulator-name = "vreg_l18b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b: ldo19 {
+			regulator-name = "vreg_l19b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9c: smps9 {
+			regulator-name = "vreg_s9c";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c: ldo10 {
+			regulator-name = "vreg_l10c";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c: ldo11 {
+			regulator-name = "vreg_l11c";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_EDP_CLKREF_EN>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/a660_zap.mbn";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* PM8008 PMIC @ 8 and 9 */
+	/* rtc6226 FM receiver @ 64 */
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* tas2563 audio codec @ 4d */
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* TMS(?) NFC @ 28 */
+	/* Ti drv2624 haptics @ 5a */
+};
+
+&i2c13 {
+	status = "okay";
+
+	/* focaltech FT3658U @ 38 */
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/qcm6490/SHIFT/otter/ipa_fws.mbn";
+	status = "okay";
+};
+
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm7325_gpios {
+	volume_down_default: volume-down-default-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@145 {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_cam_flash_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+
+	channel@147 {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_wide_rfc_therm";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qup_spi13_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_uart5_rx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart5_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcm6490/SHIFT/otter/wpss.mbn";
+	status = "okay";
+};
+
+&sdc2_clk {
+	drive-strength = <16>;
+	bias-disable;
+};
+
+&sdc2_cmd {
+	drive-strength = <10>;
+	bias-pull-up;
+};
+
+&sdc2_data {
+	drive-strength = <10>;
+	bias-pull-up;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9c>;
+	vqmmc-supply = <&vreg_l6c>;
+
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
+
+	status = "okay";
+};
+
+&tlmm {
+	/*
+	 * 48-52: protected by XPU, not sure why.
+	 */
+	gpio-reserved-ranges = <48 4>;
+
+	bluetooth_enable_default: bluetooth-enable-default-state {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	sw_ctrl_default: sw-ctrl-default-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
+	};
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+
+		pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>;
+		pinctrl-names = "default";
+
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_l19b>;
+		vddaon-supply = <&vreg_s7b>;
+		vddbtcxmx-supply = <&vreg_s7b>;
+		vddrfacmn-supply = <&vreg_s7b>;
+		vddrfa0p8-supply = <&vreg_s7b>;
+		vddrfa1p7-supply = <&vreg_s1b>;
+		vddrfa1p2-supply = <&vreg_s8b>;
+		vddrfa2p2-supply = <&vreg_s1c>;
+		vddasd-supply = <&vreg_l11c>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b>;
+	vcc-max-microamp = <800000>;
+	/*
+	 * Technically l9b enables an eLDO (supplied by s1b) which then powers
+	 * VCCQ2 of the UFS.
+	 */
+	vccq-supply = <&vreg_l9b>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c>;
+	vdda-pll-supply = <&vreg_l6b>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l2b>;
+
+	qcom,hs-crossover-voltage-microvolt = <28000>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
+	qcom,hs-rise-fall-time-bp = <5430>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <2430>;
+
+	qcom,pre-emphasis-amplitude-bp = <20000>;
+	qcom,pre-emphasis-duration-bp = <20000>;
+
+	qcom,squelch-detector-bp = <(-2090)>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l1b>;
+
+	status = "okay";
+};
+
+&wifi {
+	qcom,ath11k-calibration-variant = "SHIFTphone_8";
+
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/qcom/qcs404.dtsi b/dts/upstream/src/arm64/qcom/qcs404.dtsi
index ac451f37805..c291bbed607 100644
--- a/dts/upstream/src/arm64/qcom/qcs404.dtsi
+++ b/dts/upstream/src/arm64/qcom/qcs404.dtsi
@@ -1324,7 +1324,7 @@
 		};
 
 		apcs_hfpll: clock-controller@b016000 {
-			compatible = "qcom,hfpll";
+			compatible = "qcom,qcs404-hfpll";
 			reg = <0x0b016000 0x30>;
 			#clock-cells = <0>;
 			clock-output-names = "apcs_hfpll";
@@ -1531,10 +1531,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 2 0xff08>,
-			     <GIC_PPI 3 0xff08>,
-			     <GIC_PPI 4 0xff08>,
-			     <GIC_PPI 1 0xff08>;
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	smp2p-adsp {
@@ -1600,7 +1600,6 @@
 	thermal-zones {
 		aoss-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -1615,7 +1614,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -1630,7 +1628,6 @@
 
 		lpass-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -1645,7 +1642,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 3>;
 
@@ -1660,7 +1656,6 @@
 
 		cluster-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -1694,7 +1689,6 @@
 
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -1728,7 +1722,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -1762,7 +1755,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -1796,7 +1788,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -1830,7 +1821,6 @@
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 9>;
 
diff --git a/dts/upstream/src/arm64/qcom/qcs6490-rb3gen2.dts b/dts/upstream/src/arm64/qcom/qcs6490-rb3gen2.dts
index a085ff5b5fb..0d45662b802 100644
--- a/dts/upstream/src/arm64/qcom/qcs6490-rb3gen2.dts
+++ b/dts/upstream/src/arm64/qcom/qcs6490-rb3gen2.dts
@@ -52,6 +52,25 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	lt9611_1v2: lt9611-vdd12-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V2";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
 	reserved-memory {
 		xbl_mem: xbl@80700000 {
 			reg = <0x0 0x80700000 0x0 0x100000>;
@@ -530,6 +549,54 @@
 			   <GCC_WPSS_RSCP_CLK>;
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 24 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&vreg_l11c_2p8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -587,6 +654,21 @@
 	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 };
 
+&mdss_dsi {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi_phy {
+	vdds-supply = <&vreg_l10c_0p88>;
+	status = "okay";
+};
+
 &mdss_edp {
 	status = "okay";
 };
@@ -602,10 +684,18 @@
 	status = "okay";
 };
 
+&pmk8350_rtc {
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	firmware-name = "qcom/qcs6490/adsp.mbn";
 	status = "okay";
@@ -632,7 +722,6 @@
 };
 
 &uart5 {
-	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
 
@@ -711,3 +800,23 @@
 	function = "gpio";
 	bias-disable;
 };
+
+&pm7250b_gpios {
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio2";
+		function = "normal";
+
+		output-high;
+		input-disable;
+		power-source = <0>;
+	};
+};
+
+&tlmm {
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio24";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/qcs8550-aim300-aiot.dts b/dts/upstream/src/arm64/qcom/qcs8550-aim300-aiot.dts
new file mode 100644
index 00000000000..2e2e46f214c
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/qcs8550-aim300-aiot.dts
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "qcs8550-aim300.dtsi"
+#include "pm8010.dtsi"
+#include "pmr735d_a.dtsi"
+#include "pmr735d_b.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT";
+	compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550",
+		     "qcom,sm8550";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			debounce-interval = <15>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&redriver_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+	};
+
+	regulators-3 {
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+	};
+
+	regulators-4 {
+		vdd-s4-supply = <&vph_pwr>;
+	};
+
+	regulators-5 {
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+	};
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+
+	typec-retimer@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+
+		vcc-supply = <&vreg_l15b_1p8>;
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					data-lanes = <3 2 1 0>;
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		pinctrl-0 = <&dsi_active>, <&te_default>;
+		pinctrl-1 = <&dsi_suspend>, <&te_default>;
+		pinctrl-names = "default", "sleep";
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+		vddio-supply = <&vreg_l12b_1p8>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs8550/adsp.mbn",
+			"qcom/qcs8550/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs8550/cdsp.mbn",
+			"qcom/qcs8550/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+};
+
+&swr2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+
+	dsi_active: dsi-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	dsi_suspend: dsi-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	te_default: te-default-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
diff --git a/dts/upstream/src/arm64/qcom/qcs8550-aim300.dtsi b/dts/upstream/src/arm64/qcom/qcs8550-aim300.dtsi
new file mode 100644
index 00000000000..f6960e2d466
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/qcs8550-aim300.dtsi
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcs8550.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p25>;
+		vdd-l12-supply = <&vreg_s6g_1p86>;
+		vdd-l15-supply = <&vreg_s6g_1p86>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+
+		vreg_s4e_0p95: smps4 {
+			regulator-name = "vreg_s4e_0p95";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p08: smps5 {
+			regulator-name = "vreg_s5e_1p08";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p88: ldo3 {
+			regulator-name = "vreg_l3f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+
+		vreg_s1g_1p25: smps1 {
+			regulator-name = "vreg_s1g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p85: smps2 {
+			regulator-name = "vreg_s2g_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p8: smps3 {
+			regulator-name = "vreg_s3g_0p8";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p25: smps4 {
+			regulator-name = "vreg_s4g_1p25";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1408000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p85: smps5 {
+			regulator-name = "vreg_s5g_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p86: smps6 {
+			regulator-name = "vreg_s6g_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2g_1p2: ldo2 {
+			regulator-name = "vreg_l2g_1p2";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3e_1p2>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3c_0p9>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l1e_0p88>;
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	phys = <&pm8550b_eusb2_repeater>;
+
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p88>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/dts/upstream/src/arm64/qcom/qcs8550.dtsi b/dts/upstream/src/arm64/qcom/qcs8550.dtsi
new file mode 100644
index 00000000000..07b314834d8
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/qcs8550.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sm8550.dtsi"
+
+/delete-node/ &reserved_memory;
+
+/ {
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+
+		/* These are 3 types of reserved memory regions here:
+		 * 1. Firmware related regions which aren't shared with kernel.
+		 *     The device tree source in kernel doesn't need to have node to
+		 * indicate the firmware related reserved information. Bootloader
+		 * conveys the information by updating devicetree at runtime.
+		 *     This will be described as: UEFI saves the physical address of
+		 * the UEFI System Table to dts file's chosen node. Kernel read this
+		 * table and add reserved memory regions to efi config table. Current
+		 * reserved memory region may have reserved region which was not yet
+		 * used, release note of the firmware have such kind of information.
+		 * 2. Firmware related memory regions which are shared with Kernel
+		 *     The device tree source in the kernel needs to include nodes
+		 * that indicate fimware-related shared information. A label name
+		 * is suggested because this type of shared information needs to
+		 * be referenced by specific drivers for handling purposes.
+		 *     Unlike previous platforms, QCS8550 boots using EFI and describes
+		 * most reserved regions in the ESRT memory map. As a result, reserved
+		 * memory regions which aren't relevant to the kernel(like the hypervisor
+		 ( region) don't need to be described in DT.
+		 * 3. Remoteproc regions.
+		 *     Remoteproc regions will be reserved and then assigned to
+		 * subsystem firmware later.
+		 * Here is a reserved memory map for this platform:
+		 *  0x80000000 +-------------------+
+		 *             |                   |
+		 *             | Firmware Related  |
+		 *             |                   |
+		 *  0x8a800000 +-------------------+
+		 *             |                   |
+		 *             | Remoteproc Region |
+		 *             |                   |
+		 *  0xa7000000 +-------------------+
+		 *             |                   |
+		 *             | Kernel Available  |
+		 *             |                   |
+		 *  0xd4d00000 +-------------------+
+		 *             |                   |
+		 *             | Firmware Related  |
+		 *             |                   |
+		 * 0x100000000 +-------------------+
+		 */
+
+		aop_image_mem: aop-image-region@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config-region@81c80000 {
+			no-map;
+			reg = <0x0 0x81c80000 0x0 0x20000>;
+		};
+
+		smem_mem: smem-region@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x81d00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi-region@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: mpss-region@8a800000 {
+			reg = <0x0 0x8a800000 0x0 0x10800000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
+			reg = <0x0 0x9b000000 0x0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw-region@9b080000 {
+			reg = <0x0 0x9b080000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi-region@9b090000 {
+			reg = <0x0 0x9b090000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
+			reg = <0x0 0x9b09a000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@9b100000 {
+			reg = <0x0 0x9b100000 0x0 0x180000>;
+			no-map;
+		};
+
+		spu_secure_shared_memory_mem: spu-secure-shared-memory-region@9b280000 {
+			reg = <0x0 0x9b280000 0x0 0x80000>;
+			no-map;
+		};
+
+		camera_mem: camera-region@9b300000 {
+			reg = <0x0 0x9b300000 0x0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video-region@9bb00000 {
+			reg = <0x0 0x9bb00000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp-region@9c200000 {
+			reg = <0x0 0x9c200000 0x0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@9c900000 {
+			reg = <0x0 0x9c900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
+			reg = <0x0 0x9e900000 0x0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
+			reg = <0x0 0x9e980000 0x0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi-region@9ea00000 {
+			reg = <0x0 0x9ea00000 0x0 0x4080000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss_dsm_region@d4d00000 {
+			reg = <0x0 0xd4d00000 0x0 0x3300000>;
+			no-map;
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/qdu1000-idp.dts b/dts/upstream/src/arm64/qcom/qdu1000-idp.dts
index 5a25cdec969..e65305f8136 100644
--- a/dts/upstream/src/arm64/qcom/qdu1000-idp.dts
+++ b/dts/upstream/src/arm64/qcom/qdu1000-idp.dts
@@ -500,3 +500,26 @@
 &uart7 {
 	status = "okay";
 };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l8a_0p91>;
+	vdda18-supply = <&vreg_l14a_1p8>;
+	vdda33-supply = <&vreg_l2a_2p3>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l8a_0p91>;
+	vdda-pll-supply = <&vreg_l3a_1p2>;
+
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/qcom/qdu1000.dtsi b/dts/upstream/src/arm64/qcom/qdu1000.dtsi
index f90f03fa6a2..642ca8f0236 100644
--- a/dts/upstream/src/arm64/qcom/qdu1000.dtsi
+++ b/dts/upstream/src/arm64/qcom/qdu1000.dtsi
@@ -6,6 +6,8 @@
 #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -913,6 +915,126 @@
 			};
 		};
 
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,qdu1000-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0x0 0x088e3000 0x0 0x120>;
+			#phy-cells = <0>;
+
+			clocks =<&gcc GCC_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_qmpphy: phy@88e5000 {
+			compatible = "qcom,qdu1000-qmp-usb3-uni-phy";
+			reg = <0x0 0x088e5000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB2_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,qdu1000-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&system_noc MASTER_USB3 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &system_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
+
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0xc0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>,
+				       <&usb_1_qmpphy>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
@@ -1478,6 +1600,21 @@
 				    "llcc7_base",
 				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvmem-cells = <&multi_chan_ddr>;
+			nvmem-cell-names = "multi-chan-ddr";
+		};
+
+		sec_qfprom: efuse@221c8000 {
+			compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom";
+			reg = <0 0x221c8000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			multi_chan_ddr: multi-chan-ddr@12b {
+				reg = <0x12b 0x1>;
+				bits = <0 2>;
+			};
 		};
 	};
 
diff --git a/dts/upstream/src/arm64/qcom/qrb2210-rb1.dts b/dts/upstream/src/arm64/qcom/qrb2210-rb1.dts
index bb519142266..e19790464a1 100644
--- a/dts/upstream/src/arm64/qcom/qrb2210-rb1.dts
+++ b/dts/upstream/src/arm64/qcom/qrb2210-rb1.dts
@@ -59,6 +59,17 @@
 		};
 	};
 
+	i2c2_gpio: i2c {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -199,7 +210,15 @@
 	status = "okay";
 };
 
-&i2c2 {
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/qcm2290/a702_zap.mbn";
+	};
+};
+
+&i2c2_gpio {
 	clock-frequency = <400000>;
 	status = "okay";
 
diff --git a/dts/upstream/src/arm64/qcom/qrb4210-rb2.dts b/dts/upstream/src/arm64/qcom/qrb4210-rb2.dts
index 2c39bb1b97d..1888d99d398 100644
--- a/dts/upstream/src/arm64/qcom/qrb4210-rb2.dts
+++ b/dts/upstream/src/arm64/qcom/qrb4210-rb2.dts
@@ -60,6 +60,17 @@
 		};
 	};
 
+	i2c2_gpio: i2c {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -190,7 +201,7 @@
 	};
 };
 
-&i2c2 {
+&i2c2_gpio {
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -294,7 +305,7 @@
 
 &pmi632_vbus {
 	regulator-min-microamp = <500000>;
-	regulator-max-microamp = <3000000>;
+	regulator-max-microamp = <1000000>;
 	status = "okay";
 };
 
@@ -403,6 +414,8 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 
 		vreg_l10a_1p8: l10 {
diff --git a/dts/upstream/src/arm64/qcom/qrb5165-rb5.dts b/dts/upstream/src/arm64/qcom/qrb5165-rb5.dts
index cd0db4f31d4..ccff6cd73fd 100644
--- a/dts/upstream/src/arm64/qcom/qrb5165-rb5.dts
+++ b/dts/upstream/src/arm64/qcom/qrb5165-rb5.dts
@@ -108,10 +108,69 @@
 		regulator-always-on;
 	};
 
+	qca6390-pmu {
+		compatible = "qcom,qca6390-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddpmu-supply = <&vreg_s2f_0p95>;
+		vddrfa0p95-supply = <&vreg_s2f_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p3>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+		vddpcie1p3-supply = <&vreg_s8c_1p3>;
+		vddpcie1p9-supply = <&vreg_s5a_1p9>;
+		vddio-supply = <&vreg_s4a_1p8>;
+
+		wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+
 	thermal-zones {
 		conn-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150b_adc_tm 0>;
 
 			trips {
@@ -124,8 +183,6 @@
 		};
 
 		pm8150l-pcb-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 1>;
 
 			trips {
@@ -138,8 +195,6 @@
 		};
 
 		skin-msm-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 0>;
 
 			trips {
@@ -152,8 +207,6 @@
 		};
 
 		wifi-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 1>;
 
 			trips {
@@ -166,8 +219,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 0>;
 
 			trips {
@@ -734,6 +785,23 @@
 	vdda-pll-supply = <&vreg_l9a_1p2>;
 };
 
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1101";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie1 {
 	status = "okay";
 };
@@ -1303,6 +1371,14 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	wlan_en_state: wlan-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
 };
 
 &uart6 {
@@ -1311,17 +1387,12 @@
 	bluetooth {
 		compatible = "qcom,qca6390-bt";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_en_state>;
-
-		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-
-		vddio-supply = <&vreg_s4a_1p8>;
-		vddpmu-supply = <&vreg_s2f_0p95>;
-		vddaon-supply = <&vreg_s6a_0p95>;
-		vddrfa0p9-supply = <&vreg_s2f_0p95>;
-		vddrfa1p3-supply = <&vreg_s8c_1p3>;
-		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
 	};
 };
 
@@ -1356,8 +1427,8 @@
 	usb-role-switch;
 };
 
-&usb_1_role_switch_out {
-	remote-endpoint = <&pm8150b_role_switch_in>;
+&usb_1_dwc3_hs_out {
+	remote-endpoint = <&pm8150b_hs_in>;
 };
 
 &usb_1_hsphy {
@@ -1373,7 +1444,6 @@
 
 	vdda-phy-supply = <&vreg_l9a_1p2>;
 	vdda-pll-supply = <&vreg_l18a_0p92>;
-	orientation-switch;
 };
 
 &usb_1_qmpphy_out {
@@ -1465,8 +1535,8 @@
 
 			port@0 {
 				reg = <0>;
-				pm8150b_role_switch_in: endpoint {
-					remote-endpoint = <&usb_1_role_switch_out>;
+				pm8150b_hs_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs_out>;
 				};
 			};
 
diff --git a/dts/upstream/src/arm64/qcom/qru1000-idp.dts b/dts/upstream/src/arm64/qcom/qru1000-idp.dts
index 2a862c83309..1c781d9e24c 100644
--- a/dts/upstream/src/arm64/qcom/qru1000-idp.dts
+++ b/dts/upstream/src/arm64/qcom/qru1000-idp.dts
@@ -467,3 +467,26 @@
 &uart7 {
 	status = "okay";
 };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l8a_0p91>;
+	vdda18-supply = <&vreg_l14a_1p8>;
+	vdda33-supply = <&vreg_l2a_2p3>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l8a_0p91>;
+	vdda-pll-supply = <&vreg_l3a_1p2>;
+
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/qcom/sa8155p.dtsi b/dts/upstream/src/arm64/qcom/sa8155p.dtsi
index ffb7ab69521..9e70effc72e 100644
--- a/dts/upstream/src/arm64/qcom/sa8155p.dtsi
+++ b/dts/upstream/src/arm64/qcom/sa8155p.dtsi
@@ -38,3 +38,7 @@
 	 */
 	compatible = "qcom,sa8155p-rpmhpd";
 };
+
+&videocc {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
diff --git a/dts/upstream/src/arm64/qcom/sa8775p-pmics.dtsi b/dts/upstream/src/arm64/qcom/sa8775p-pmics.dtsi
index eaa43f022a6..1369c3d43f8 100644
--- a/dts/upstream/src/arm64/qcom/sa8775p-pmics.dtsi
+++ b/dts/upstream/src/arm64/qcom/sa8775p-pmics.dtsi
@@ -10,7 +10,7 @@
 	thermal-zones {
 		pmm8654au_0_thermal: pm8775-0-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmm8654au_0_temp_alarm>;
 
 			trips {
@@ -30,7 +30,7 @@
 
 		pmm8654au_1_thermal: pm8775-1-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmm8654au_1_temp_alarm>;
 
 			trips {
@@ -50,7 +50,7 @@
 
 		pmm8654au_2_thermal: pm8775-2-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmm8654au_2_temp_alarm>;
 
 			trips {
@@ -70,7 +70,7 @@
 
 		pmm8654au_3_thermal: pm8775-3-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmm8654au_3_temp_alarm>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sa8775p-ride-r3.dts b/dts/upstream/src/arm64/qcom/sa8775p-ride-r3.dts
new file mode 100644
index 00000000000..ae065ae9247
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/sa8775p-ride-r3.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sa8775p-ride.dtsi"
+
+/ {
+	model = "Qualcomm SA8775P Ride Rev3";
+	compatible = "qcom,sa8775p-ride-r3", "qcom,sa8775p";
+};
+
+&ethernet0 {
+	phy-mode = "2500base-x";
+};
+
+&ethernet1 {
+	phy-mode = "2500base-x";
+};
+
+&mdio {
+	compatible = "snps,dwmac-mdio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	sgmii_phy0: phy@8 {
+		compatible = "ethernet-phy-id31c3.1c33";
+		reg = <0x8>;
+		device_type = "ethernet-phy";
+		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <11000>;
+		reset-deassert-us = <70000>;
+	};
+
+	sgmii_phy1: phy@0 {
+		compatible = "ethernet-phy-id31c3.1c33";
+		reg = <0x0>;
+		device_type = "ethernet-phy";
+		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <11000>;
+		reset-deassert-us = <70000>;
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/sa8775p-ride.dts b/dts/upstream/src/arm64/qcom/sa8775p-ride.dts
index 26ad05bd3b3..2e87fd760db 100644
--- a/dts/upstream/src/arm64/qcom/sa8775p-ride.dts
+++ b/dts/upstream/src/arm64/qcom/sa8775p-ride.dts
@@ -5,835 +5,43 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-#include "sa8775p.dtsi"
-#include "sa8775p-pmics.dtsi"
+#include "sa8775p-ride.dtsi"
 
 / {
 	model = "Qualcomm SA8775P Ride";
 	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
-
-	aliases {
-		ethernet0 = &ethernet0;
-		ethernet1 = &ethernet1;
-		i2c11 = &i2c11;
-		i2c18 = &i2c18;
-		serial0 = &uart10;
-		serial1 = &uart12;
-		serial2 = &uart17;
-		spi16 = &spi16;
-		ufshc1 = &ufs_mem_hc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pmm8654au-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vreg_s4a: smps4 {
-			regulator-name = "vreg_s4a";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1816000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s5a: smps5 {
-			regulator-name = "vreg_s5a";
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <1996000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s9a: smps9 {
-			regulator-name = "vreg_s9a";
-			regulator-min-microvolt = <535000>;
-			regulator-max-microvolt = <1120000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4a: ldo4 {
-			regulator-name = "vreg_l4a";
-			regulator-min-microvolt = <788000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l5a: ldo5 {
-			regulator-name = "vreg_l5a";
-			regulator-min-microvolt = <870000>;
-			regulator-max-microvolt = <950000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6a: ldo6 {
-			regulator-name = "vreg_l6a";
-			regulator-min-microvolt = <870000>;
-			regulator-max-microvolt = <970000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7a: ldo7 {
-			regulator-name = "vreg_l7a";
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <950000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8a: ldo8 {
-			regulator-name = "vreg_l8a";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9a: ldo9 {
-			regulator-name = "vreg_l9a";
-			regulator-min-microvolt = <2970000>;
-			regulator-max-microvolt = <3544000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pmm8654au-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vreg_l1c: ldo1 {
-			regulator-name = "vreg_l1c";
-			regulator-min-microvolt = <1140000>;
-			regulator-max-microvolt = <1260000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c: ldo2 {
-			regulator-name = "vreg_l2c";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c: ldo3 {
-			regulator-name = "vreg_l3c";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4c: ldo4 {
-			regulator-name = "vreg_l4c";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			/*
-			 * FIXME: This should have regulator-allow-set-load but
-			 * we're getting an over-current fault from the PMIC
-			 * when switching to LPM.
-			 */
-		};
-
-		vreg_l5c: ldo5 {
-			regulator-name = "vreg_l5c";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6c: ldo6 {
-			regulator-name = "vreg_l6c";
-			regulator-min-microvolt = <1620000>;
-			regulator-max-microvolt = <1980000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7c: ldo7 {
-			regulator-name = "vreg_l7c";
-			regulator-min-microvolt = <1620000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8c: ldo8 {
-			regulator-name = "vreg_l8c";
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9c: ldo9 {
-			regulator-name = "vreg_l9c";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmm8654au-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vreg_s4e: smps4 {
-			regulator-name = "vreg_s4e";
-			regulator-min-microvolt = <970000>;
-			regulator-max-microvolt = <1520000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s7e: smps7 {
-			regulator-name = "vreg_s7e";
-			regulator-min-microvolt = <1010000>;
-			regulator-max-microvolt = <1170000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s9e: smps9 {
-			regulator-name = "vreg_s9e";
-			regulator-min-microvolt = <300000>;
-			regulator-max-microvolt = <570000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6e: ldo6 {
-			regulator-name = "vreg_l6e";
-			regulator-min-microvolt = <1280000>;
-			regulator-max-microvolt = <1450000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8e: ldo8 {
-			regulator-name = "vreg_l8e";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1950000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
 };
 
 &ethernet0 {
 	phy-mode = "sgmii";
-	phy-handle = <&sgmii_phy0>;
-
-	pinctrl-0 = <&ethernet0_default>;
-	pinctrl-names = "default";
-
-	snps,mtl-rx-config = <&mtl_rx_setup>;
-	snps,mtl-tx-config = <&mtl_tx_setup>;
-	snps,ps-speed = <1000>;
-
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sgmii_phy0: phy@8 {
-			compatible = "ethernet-phy-id0141.0dd4";
-			reg = <0x8>;
-			device_type = "ethernet-phy";
-			interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
-			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <11000>;
-			reset-deassert-us = <70000>;
-		};
-
-		sgmii_phy1: phy@a {
-			compatible = "ethernet-phy-id0141.0dd4";
-			reg = <0xa>;
-			device_type = "ethernet-phy";
-			interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
-			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <11000>;
-			reset-deassert-us = <70000>;
-		};
-	};
-
-	mtl_rx_setup: rx-queues-config {
-		snps,rx-queues-to-use = <4>;
-		snps,rx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x0>;
-			snps,route-up;
-			snps,priority = <0x1>;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x1>;
-			snps,route-ptp;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x2>;
-			snps,route-avcp;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x3>;
-			snps,priority = <0xc>;
-		};
-	};
-
-	mtl_tx_setup: tx-queues-config {
-		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-	};
 };
 
 &ethernet1 {
 	phy-mode = "sgmii";
-	phy-handle = <&sgmii_phy1>;
-
-	snps,mtl-rx-config = <&mtl_rx_setup1>;
-	snps,mtl-tx-config = <&mtl_tx_setup1>;
-	snps,ps-speed = <1000>;
-
-	status = "okay";
-
-	mtl_rx_setup1: rx-queues-config {
-		snps,rx-queues-to-use = <4>;
-		snps,rx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x0>;
-			snps,route-up;
-			snps,priority = <0x1>;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x1>;
-			snps,route-ptp;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x2>;
-			snps,route-avcp;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x3>;
-			snps,priority = <0xc>;
-		};
-	};
-
-	mtl_tx_setup1: tx-queues-config {
-		snps,tx-queues-to-use = <4>;
-		snps,tx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-	};
-};
-
-&i2c11 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&qup_i2c11_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c18 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&qup_i2c18_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&pmm8654au_0_gpios {
-	gpio-line-names = "DS_EN",
-			  "POFF_COMPLETE",
-			  "UFS0_VER_ID",
-			  "FAST_POFF",
-			  "DBU1_PON_DONE",
-			  "AOSS_SLEEP",
-			  "CAM_DES0_EN",
-			  "CAM_DES1_EN",
-			  "CAM_DES2_EN",
-			  "CAM_DES3_EN",
-			  "UEFI",
-			  "ANALOG_PON_OPT";
-};
-
-&pmm8654au_0_pon_resin {
-	linux,code = <KEY_VOLUMEDOWN>;
-	status = "okay";
-};
-
-&pmm8654au_1_gpios {
-	gpio-line-names = "PMIC_C_ID0",
-			  "PMIC_C_ID1",
-			  "UFS1_VER_ID",
-			  "IPA_PWR",
-			  "",
-			  "WLAN_DBU4_EN",
-			  "WLAN_EN",
-			  "BT_EN",
-			  "USB2_PWR_EN",
-			  "USB2_FAULT";
-
-	usb2_en_state: usb2-en-state {
-		pins = "gpio9";
-		function = "normal";
-		output-high;
-		power-source = <0>;
-	};
-};
-
-&pmm8654au_2_gpios {
-	gpio-line-names = "PMIC_E_ID0",
-			  "PMIC_E_ID1",
-			  "USB0_PWR_EN",
-			  "USB0_FAULT",
-			  "SENSOR_IRQ_1",
-			  "SENSOR_IRQ_2",
-			  "SENSOR_RST",
-			  "SGMIIO0_RST",
-			  "SGMIIO1_RST",
-			  "USB1_PWR_ENABLE",
-			  "USB1_FAULT",
-			  "VMON_SPX8";
-
-	usb0_en_state: usb0-en-state {
-		pins = "gpio3";
-		function = "normal";
-		output-high;
-		power-source = <0>;
-	};
-
-	usb1_en_state: usb1-en-state {
-		pins = "gpio10";
-		function = "normal";
-		output-high;
-		power-source = <0>;
-	};
-};
-
-&pmm8654au_3_gpios {
-	gpio-line-names = "PMIC_G_ID0",
-			  "PMIC_G_ID1",
-			  "GNSS_RST",
-			  "GNSS_EN",
-			  "GNSS_BOOT_MODE";
-};
-
-&qupv3_id_1 {
-	status = "okay";
-};
-
-&qupv3_id_2 {
-	status = "okay";
-};
-
-&serdes0 {
-	phy-supply = <&vreg_l5a>;
-	status = "okay";
-};
-
-&serdes1 {
-	phy-supply = <&vreg_l5a>;
-	status = "okay";
-};
-
-&sleep_clk {
-	clock-frequency = <32764>;
-};
-
-&spi16 {
-	pinctrl-0 = <&qup_spi16_default>;
-	pinctrl-names = "default";
-	status = "okay";
 };
 
-&tlmm {
-	ethernet0_default: ethernet0-default-state {
-		ethernet0_mdc: ethernet0-mdc-pins {
-			pins = "gpio8";
-			function = "emac0_mdc";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-
-		ethernet0_mdio: ethernet0-mdio-pins {
-			pins = "gpio9";
-			function = "emac0_mdio";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-	};
-
-	qup_uart10_default: qup-uart10-state {
-		pins = "gpio46", "gpio47";
-		function = "qup1_se3";
-	};
-
-	qup_spi16_default: qup-spi16-state {
-		pins = "gpio86", "gpio87", "gpio88", "gpio89";
-		function = "qup2_se2";
-		drive-strength = <6>;
-		bias-disable;
-	};
-
-	qup_i2c11_default: qup-i2c11-state {
-		pins = "gpio48", "gpio49";
-		function = "qup1_se4";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qup_i2c18_default: qup-i2c18-state {
-		pins = "gpio95", "gpio96";
-		function = "qup2_se4";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	qup_uart12_default: qup-uart12-state {
-		qup_uart12_cts: qup-uart12-cts-pins {
-			pins = "gpio52";
-			function = "qup1_se5";
-			bias-disable;
-		};
-
-		qup_uart12_rts: qup-uart12-rts-pins {
-			pins = "gpio53";
-			function = "qup1_se5";
-			bias-pull-down;
-		};
-
-		qup_uart12_tx: qup-uart12-tx-pins {
-			pins = "gpio54";
-			function = "qup1_se5";
-			bias-pull-up;
-		};
-
-		qup_uart12_rx: qup-uart12-rx-pins {
-			pins = "gpio55";
-			function = "qup1_se5";
-			bias-pull-down;
-		};
-	};
-
-	qup_uart17_default: qup-uart17-state {
-		qup_uart17_cts: qup-uart17-cts-pins {
-			pins = "gpio91";
-			function = "qup2_se3";
-			bias-disable;
-		};
-
-		qup_uart17_rts: qup0-uart17-rts-pins {
-			pins = "gpio92";
-			function = "qup2_se3";
-			bias-pull-down;
-		};
-
-		qup_uart17_tx: qup0-uart17-tx-pins {
-			pins = "gpio93";
-			function = "qup2_se3";
-			bias-pull-up;
-		};
-
-		qup_uart17_rx: qup0-uart17-rx-pins {
-			pins = "gpio94";
-			function = "qup2_se3";
-			bias-pull-down;
-		};
-	};
+&mdio {
+	compatible = "snps,dwmac-mdio";
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-	pcie0_default_state: pcie0-default-state {
-		perst-pins {
-			pins = "gpio2";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		clkreq-pins {
-			pins = "gpio1";
-			function = "pcie0_clkreq";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		wake-pins {
-			pins = "gpio0";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
+	sgmii_phy0: phy@8 {
+		compatible = "ethernet-phy-id0141.0dd4";
+		reg = <0x8>;
+		device_type = "ethernet-phy";
+		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <11000>;
+		reset-deassert-us = <70000>;
 	};
 
-	pcie1_default_state: pcie1-default-state {
-		perst-pins {
-			pins = "gpio4";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		clkreq-pins {
-			pins = "gpio3";
-			function = "pcie1_clkreq";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		wake-pins {
-			pins = "gpio5";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
+	sgmii_phy1: phy@a {
+		compatible = "ethernet-phy-id0141.0dd4";
+		reg = <0xa>;
+		device_type = "ethernet-phy";
+		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <11000>;
+		reset-deassert-us = <70000>;
 	};
 };
-
-&pcie0 {
-	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie0_default_state>;
-
-	status = "okay";
-};
-
-&pcie1 {
-	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie1_default_state>;
-
-	status = "okay";
-};
-
-&pcie0_phy {
-	vdda-phy-supply = <&vreg_l5a>;
-	vdda-pll-supply = <&vreg_l1c>;
-
-	status = "okay";
-};
-
-&pcie1_phy {
-	vdda-phy-supply = <&vreg_l5a>;
-	vdda-pll-supply = <&vreg_l1c>;
-
-	status = "okay";
-};
-
-&uart10 {
-	compatible = "qcom,geni-debug-uart";
-	pinctrl-0 = <&qup_uart10_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart12 {
-	pinctrl-0 = <&qup_uart12_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart17 {
-	pinctrl-0 = <&qup_uart17_default>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&ufs_mem_hc {
-	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
-	vcc-supply = <&vreg_l8a>;
-	vcc-max-microamp = <1100000>;
-	vccq-supply = <&vreg_l4c>;
-	vccq-max-microamp = <1200000>;
-
-	status = "okay";
-};
-
-&ufs_mem_phy {
-	vdda-phy-supply = <&vreg_l4a>;
-	vdda-pll-supply = <&vreg_l1c>;
-
-	status = "okay";
-};
-
-&usb_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_en_state>;
-
-	status = "okay";
-};
-
-&usb_0_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_0_hsphy {
-	vdda-pll-supply = <&vreg_l7a>;
-	vdda18-supply = <&vreg_l6c>;
-	vdda33-supply = <&vreg_l9a>;
-
-	status = "okay";
-};
-
-&usb_0_qmpphy {
-	vdda-phy-supply = <&vreg_l1c>;
-	vdda-pll-supply = <&vreg_l7a>;
-
-	status = "okay";
-};
-
-&usb_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_en_state>;
-
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_hsphy {
-	vdda-pll-supply = <&vreg_l7a>;
-	vdda18-supply = <&vreg_l6c>;
-	vdda33-supply = <&vreg_l9a>;
-
-	status = "okay";
-};
-
-&usb_1_qmpphy {
-	vdda-phy-supply = <&vreg_l1c>;
-	vdda-pll-supply = <&vreg_l7a>;
-
-	status = "okay";
-};
-
-&usb_2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_en_state>;
-
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	vdda-pll-supply = <&vreg_l7a>;
-	vdda18-supply = <&vreg_l6c>;
-	vdda33-supply = <&vreg_l9a>;
-
-	status = "okay";
-};
-
-&xo_board_clk {
-	clock-frequency = <38400000>;
-};
diff --git a/dts/upstream/src/arm64/qcom/sa8775p-ride.dtsi b/dts/upstream/src/arm64/qcom/sa8775p-ride.dtsi
new file mode 100644
index 00000000000..2a6170623ea
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/sa8775p-ride.dtsi
@@ -0,0 +1,814 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sa8775p.dtsi"
+#include "sa8775p-pmics.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+		i2c11 = &i2c11;
+		i2c18 = &i2c18;
+		serial0 = &uart10;
+		serial1 = &uart12;
+		serial2 = &uart17;
+		spi16 = &spi16;
+		ufshc1 = &ufs_mem_hc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1816000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1996000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/*
+			 * FIXME: This should have regulator-allow-set-load but
+			 * we're getting an over-current fault from the PMIC
+			 * when switching to LPM.
+			 */
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e: smps4 {
+			regulator-name = "vreg_s4e";
+			regulator-min-microvolt = <970000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7e: smps7 {
+			regulator-name = "vreg_s7e";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9e: smps9 {
+			regulator-name = "vreg_s9e";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <570000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&sgmii_phy0>;
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio: mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-handle = <&sgmii_phy1>;
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&qup_i2c11_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c18 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&qup_i2c18_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pmm8654au_0_gpios {
+	gpio-line-names = "DS_EN",
+			  "POFF_COMPLETE",
+			  "UFS0_VER_ID",
+			  "FAST_POFF",
+			  "DBU1_PON_DONE",
+			  "AOSS_SLEEP",
+			  "CAM_DES0_EN",
+			  "CAM_DES1_EN",
+			  "CAM_DES2_EN",
+			  "CAM_DES3_EN",
+			  "UEFI",
+			  "ANALOG_PON_OPT";
+};
+
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmm8654au_1_gpios {
+	gpio-line-names = "PMIC_C_ID0",
+			  "PMIC_C_ID1",
+			  "UFS1_VER_ID",
+			  "IPA_PWR",
+			  "",
+			  "WLAN_DBU4_EN",
+			  "WLAN_EN",
+			  "BT_EN",
+			  "USB2_PWR_EN",
+			  "USB2_FAULT";
+
+	usb2_en_state: usb2-en-state {
+		pins = "gpio9";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+};
+
+&pmm8654au_2_gpios {
+	gpio-line-names = "PMIC_E_ID0",
+			  "PMIC_E_ID1",
+			  "USB0_PWR_EN",
+			  "USB0_FAULT",
+			  "SENSOR_IRQ_1",
+			  "SENSOR_IRQ_2",
+			  "SENSOR_RST",
+			  "SGMIIO0_RST",
+			  "SGMIIO1_RST",
+			  "USB1_PWR_ENABLE",
+			  "USB1_FAULT",
+			  "VMON_SPX8";
+
+	usb0_en_state: usb0-en-state {
+		pins = "gpio3";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+
+	usb1_en_state: usb1-en-state {
+		pins = "gpio10";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+};
+
+&pmm8654au_3_gpios {
+	gpio-line-names = "PMIC_G_ID0",
+			  "PMIC_G_ID1",
+			  "GNSS_RST",
+			  "GNSS_EN",
+			  "GNSS_BOOT_MODE";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&serdes1 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&spi16 {
+	pinctrl-0 = <&qup_spi16_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	qup_uart10_default: qup-uart10-state {
+		pins = "gpio46", "gpio47";
+		function = "qup1_se3";
+	};
+
+	qup_spi16_default: qup-spi16-state {
+		pins = "gpio86", "gpio87", "gpio88", "gpio89";
+		function = "qup2_se2";
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	qup_i2c11_default: qup-i2c11-state {
+		pins = "gpio48", "gpio49";
+		function = "qup1_se4";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_i2c18_default: qup-i2c18-state {
+		pins = "gpio95", "gpio96";
+		function = "qup2_se4";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart12_default: qup-uart12-state {
+		qup_uart12_cts: qup-uart12-cts-pins {
+			pins = "gpio52";
+			function = "qup1_se5";
+			bias-disable;
+		};
+
+		qup_uart12_rts: qup-uart12-rts-pins {
+			pins = "gpio53";
+			function = "qup1_se5";
+			bias-pull-down;
+		};
+
+		qup_uart12_tx: qup-uart12-tx-pins {
+			pins = "gpio54";
+			function = "qup1_se5";
+			bias-pull-up;
+		};
+
+		qup_uart12_rx: qup-uart12-rx-pins {
+			pins = "gpio55";
+			function = "qup1_se5";
+			bias-pull-down;
+		};
+	};
+
+	qup_uart17_default: qup-uart17-state {
+		qup_uart17_cts: qup-uart17-cts-pins {
+			pins = "gpio91";
+			function = "qup2_se3";
+			bias-disable;
+		};
+
+		qup_uart17_rts: qup0-uart17-rts-pins {
+			pins = "gpio92";
+			function = "qup2_se3";
+			bias-pull-down;
+		};
+
+		qup_uart17_tx: qup0-uart17-tx-pins {
+			pins = "gpio93";
+			function = "qup2_se3";
+			bias-pull-up;
+		};
+
+		qup_uart17_rx: qup0-uart17-rx-pins {
+			pins = "gpio94";
+			function = "qup2_se3";
+			bias-pull-down;
+		};
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio3";
+			function = "pcie1_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio5";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&uart10 {
+	compatible = "qcom,geni-debug-uart";
+	pinctrl-0 = <&qup_uart10_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart12 {
+	pinctrl-0 = <&qup_uart12_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart17 {
+	pinctrl-0 = <&qup_uart17_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_state>;
+
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_state>;
+
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_en_state>;
+
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/dts/upstream/src/arm64/qcom/sa8775p.dtsi b/dts/upstream/src/arm64/qcom/sa8775p.dtsi
index 1b3dc0ece54..23f1b2e5e62 100644
--- a/dts/upstream/src/arm64/qcom/sa8775p.dtsi
+++ b/dts/upstream/src/arm64/qcom/sa8775p.dtsi
@@ -205,9 +205,23 @@
 		};
 	};
 
+	dummy-sink {
+		compatible = "arm,coresight-dummy-sink";
+
+		in-ports {
+			port {
+				eud_in: endpoint {
+					remote-endpoint =
+					<&swao_rep_out1>;
+				};
+			};
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-sa8775p", "qcom,scm";
+			memory-region = <&tz_ffi_mem>;
 		};
 	};
 
@@ -418,6 +432,12 @@
 			no-map;
 		};
 
+		tz_ffi_mem: tz-ffi@91c00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x91c00000 0x0 0x1400000>;
+			no-map;
+		};
+
 		lpass_machine_learning_mem: lpass-machine-learning@93b00000 {
 			reg = <0x0 0x93b00000 0x0 0xf00000>;
 			no-map;
@@ -1644,6 +1664,919 @@
 			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
 		};
 
+		stm: stm@4002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x4002000 0x0 0x1000>,
+				  <0x0 0x16280000 0x0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint =
+						<&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		tpdm@4003000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4003000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					qdss_tpdm0_out: endpoint {
+						remote-endpoint =
+						<&qdss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpda@4004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x4004000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					qdss_tpda_out: endpoint {
+						remote-endpoint =
+						<&funnel0_in6>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					qdss_tpda_in0: endpoint {
+						remote-endpoint =
+						<&qdss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					qdss_tpda_in1: endpoint {
+						remote-endpoint =
+						<&qdss_tpdm1_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@400f000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x400f000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					qdss_tpdm1_out: endpoint {
+						remote-endpoint =
+						<&qdss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@4041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x4041000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint =
+						<&qdss_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					funnel0_in6: endpoint {
+						remote-endpoint =
+						<&qdss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint =
+						<&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@4042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x4042000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint =
+						<&qdss_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint =
+						<&apss_funnel1_out>;
+					};
+				};
+			};
+		};
+
+		funnel@4045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x4045000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					qdss_funnel_out: endpoint {
+						remote-endpoint =
+						<&aoss_funnel_in7>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					qdss_funnel_in0: endpoint {
+						remote-endpoint =
+						<&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					qdss_funnel_in1: endpoint {
+						remote-endpoint =
+						<&funnel1_out>;
+					};
+				};
+			};
+		};
+
+		funnel@4b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x4b04000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					aoss_funnel_out: endpoint {
+						remote-endpoint =
+						<&etf0_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					aoss_funnel_in6: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					aoss_funnel_in7: endpoint {
+						remote-endpoint =
+						<&qdss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		tmc_etf: tmc@4b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x4b05000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf0_out: endpoint {
+						remote-endpoint =
+						<&swao_rep_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf0_in: endpoint {
+						remote-endpoint =
+						<&aoss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@4b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x4b06000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					swao_rep_out1: endpoint {
+						remote-endpoint =
+						<&eud_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_rep_in: endpoint {
+						remote-endpoint =
+						<&etf0_out>;
+					};
+				};
+			};
+		};
+
+		tpda@4b08000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x4b08000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					aoss_tpda_out: endpoint {
+						remote-endpoint =
+						<&aoss_funnel_in6>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aoss_tpda_in0: endpoint {
+						remote-endpoint =
+						<&aoss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aoss_tpda_in1: endpoint {
+						remote-endpoint =
+						<&aoss_tpdm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					aoss_tpda_in2: endpoint {
+						remote-endpoint =
+						<&aoss_tpdm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					aoss_tpda_in3: endpoint {
+						remote-endpoint =
+						<&aoss_tpdm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					aoss_tpda_in4: endpoint {
+						remote-endpoint =
+						<&aoss_tpdm4_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b09000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4b09000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm0_out: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0a000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4b0a000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm1_out: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0b000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4b0b000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm2_out: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_in2>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4b0c000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm3_out: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@4b0d000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x4b0d000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					aoss_tpdm4_out: endpoint {
+						remote-endpoint =
+						<&aoss_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		aoss_cti: cti@4b13000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x4b13000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+		};
+
+		etm@6040000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6040000 0x0 0x1000>;
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in0>;
+					};
+				};
+			};
+		};
+
+		etm@6140000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6140000 0x0 0x1000>;
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in1>;
+					};
+				};
+			};
+		};
+
+		etm@6240000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6240000 0x0 0x1000>;
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in2>;
+					};
+				};
+			};
+		};
+
+		etm@6340000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6340000 0x0 0x1000>;
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in3>;
+					};
+				};
+			};
+		};
+
+		etm@6440000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6440000 0x0 0x1000>;
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in4>;
+					};
+				};
+			};
+		};
+
+		etm@6540000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6540000 0x0 0x1000>;
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in5>;
+					};
+				};
+			};
+		};
+
+		etm@6640000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6640000 0x0 0x1000>;
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in6>;
+					};
+				};
+			};
+		};
+
+		etm@6740000 {
+			compatible = "arm,primecell";
+			reg = <0x0 0x6740000 0x0 0x1000>;
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x6800000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel0_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel1_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel0_in0: endpoint {
+						remote-endpoint =
+						<&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel0_in1: endpoint {
+						remote-endpoint =
+						<&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel0_in2: endpoint {
+						remote-endpoint =
+						<&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel0_in3: endpoint {
+						remote-endpoint =
+						<&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel0_in4: endpoint {
+						remote-endpoint =
+						<&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel0_in5: endpoint {
+						remote-endpoint =
+						<&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel0_in6: endpoint {
+						remote-endpoint =
+						<&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel0_in7: endpoint {
+						remote-endpoint =
+						<&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x6810000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel1_out: endpoint {
+						remote-endpoint =
+						<&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel1_in0: endpoint {
+						remote-endpoint =
+						<&apss_funnel0_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel1_in3: endpoint {
+						remote-endpoint =
+						<&apss_tpda_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@6860000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x6860000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <64>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm3_out: endpoint {
+						remote-endpoint =
+						<&apss_tpda_in3>;
+					};
+				};
+			};
+		};
+
+		tpdm@6861000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x6861000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm4_out: endpoint {
+						remote-endpoint =
+						<&apss_tpda_in4>;
+					};
+				};
+			};
+		};
+
+		tpda@6863000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0x0 0x6863000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_tpda_out: endpoint {
+						remote-endpoint =
+						<&apss_funnel1_in3>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_tpda_in0: endpoint {
+						remote-endpoint =
+						<&apss_tpdm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_tpda_in1: endpoint {
+						remote-endpoint =
+						<&apss_tpdm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_tpda_in2: endpoint {
+						remote-endpoint =
+						<&apss_tpdm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_tpda_in3: endpoint {
+						remote-endpoint =
+						<&apss_tpdm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_tpda_in4: endpoint {
+						remote-endpoint =
+						<&apss_tpdm4_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@68a0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x68a0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm0_out: endpoint {
+						remote-endpoint =
+						<&apss_tpda_in0>;
+					};
+				};
+			};
+		};
+
+		tpdm@68b0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x68b0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,cmb-element-bits = <32>;
+			qcom,cmb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm1_out: endpoint {
+						remote-endpoint =
+						<&apss_tpda_in1>;
+					};
+				};
+			};
+		};
+
+		tpdm@68c0000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0x0 0x68c0000 0x0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			qcom,dsb-element-bits = <32>;
+			qcom,dsb-msrs-num = <32>;
+
+			out-ports {
+				port {
+					apss_tpdm2_out: endpoint {
+						remote-endpoint =
+						<&apss_tpda_in2>;
+					};
+				};
+			};
+		};
+
 		usb_0_hsphy: phy@88e4000 {
 			compatible = "qcom,sa8775p-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
@@ -1959,6 +2892,25 @@
 			status = "disabled";
 		};
 
+		llcc: system-cache-controller@9200000 {
+			compatible = "qcom,sa8775p-llcc";
+			reg = <0x0 0x09200000 0x0 0x80000>,
+			      <0x0 0x09300000 0x0 0x80000>,
+			      <0x0 0x09400000 0x0 0x80000>,
+			      <0x0 0x09500000 0x0 0x80000>,
+			      <0x0 0x09600000 0x0 0x80000>,
+			      <0x0 0x09700000 0x0 0x80000>,
+			      <0x0 0x09a00000 0x0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x30000>,
@@ -2099,6 +3051,20 @@
 			wakeup-parent = <&pdc>;
 		};
 
+		sram: sram@146d8000 {
+			compatible = "qcom,sa8775p-imem", "syscon", "simple-mfd";
+			reg = <0x0 0x146d8000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x146d8000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0 0x15000000 0x0 0x100000>;
@@ -2504,6 +3470,7 @@
 			phy-names = "serdes";
 
 			iommus = <&apps_smmu 0x140 0xf>;
+			dma-coherent;
 
 			snps,tso;
 			snps,pbl = <32>;
@@ -2538,6 +3505,7 @@
 			phy-names = "serdes";
 
 			iommus = <&apps_smmu 0x120 0xf>;
+			dma-coherent;
 
 			snps,tso;
 			snps,pbl = <32>;
@@ -2550,9 +3518,6 @@
 
 	thermal-zones {
 		aoss-0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -2572,7 +3537,6 @@
 
 		cpu-0-0-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -2593,7 +3557,6 @@
 
 		cpu-0-1-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -2614,7 +3577,6 @@
 
 		cpu-0-2-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -2635,7 +3597,6 @@
 
 		cpu-0-3-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -2656,7 +3617,6 @@
 
 		gpuss-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -2677,7 +3637,6 @@
 
 		gpuss-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -2698,7 +3657,6 @@
 
 		gpuss-2-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -2718,9 +3676,6 @@
 		};
 
 		audio-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -2739,9 +3694,6 @@
 		};
 
 		camss-0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -2760,9 +3712,6 @@
 		};
 
 		pcie-0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -2781,9 +3730,6 @@
 		};
 
 		cpuss-0-0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -2802,9 +3748,6 @@
 		};
 
 		aoss-1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
@@ -2824,7 +3767,6 @@
 
 		cpu-0-0-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -2845,7 +3787,6 @@
 
 		cpu-0-1-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -2866,7 +3807,6 @@
 
 		cpu-0-2-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -2887,7 +3827,6 @@
 
 		cpu-0-3-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -2908,7 +3847,6 @@
 
 		gpuss-3-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -2929,7 +3867,6 @@
 
 		gpuss-4-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -2950,7 +3887,6 @@
 
 		gpuss-5-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -2970,9 +3906,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -2991,9 +3924,6 @@
 		};
 
 		camss-1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -3012,9 +3942,6 @@
 		};
 
 		pcie-1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
@@ -3033,9 +3960,6 @@
 		};
 
 		cpuss-0-1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 11>;
 
 			trips {
@@ -3054,9 +3978,6 @@
 		};
 
 		aoss-2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens2 0>;
 
 			trips {
@@ -3076,7 +3997,6 @@
 
 		cpu-1-0-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens2 1>;
 
@@ -3097,7 +4017,6 @@
 
 		cpu-1-1-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens2 2>;
 
@@ -3118,7 +4037,6 @@
 
 		cpu-1-2-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens2 3>;
 
@@ -3139,7 +4057,6 @@
 
 		cpu-1-3-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens2 4>;
 
@@ -3160,7 +4077,6 @@
 
 		nsp-0-0-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens2 5>;
 
@@ -3181,7 +4097,6 @@
 
 		nsp-0-1-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens2 6>;
 
@@ -3202,7 +4117,6 @@
 
 		nsp-0-2-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens2 7>;
 
@@ -3223,7 +4137,6 @@
 
 		nsp-1-0-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens2 8>;
 
@@ -3244,7 +4157,6 @@
 
 		nsp-1-1-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens2 9>;
 
@@ -3265,7 +4177,6 @@
 
 		nsp-1-2-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens2 10>;
 
@@ -3285,9 +4196,6 @@
 		};
 
 		ddrss-0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens2 11>;
 
 			trips {
@@ -3306,9 +4214,6 @@
 		};
 
 		cpuss-1-0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens2 12>;
 
 			trips {
@@ -3327,9 +4232,6 @@
 		};
 
 		aoss-3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens3 0>;
 
 			trips {
@@ -3349,7 +4251,6 @@
 
 		cpu-1-0-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens3 1>;
 
@@ -3370,7 +4271,6 @@
 
 		cpu-1-1-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens3 2>;
 
@@ -3391,7 +4291,6 @@
 
 		cpu-1-2-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens3 3>;
 
@@ -3412,7 +4311,6 @@
 
 		cpu-1-3-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens3 4>;
 
@@ -3433,7 +4331,6 @@
 
 		nsp-0-0-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens3 5>;
 
@@ -3454,7 +4351,6 @@
 
 		nsp-0-1-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens3 6>;
 
@@ -3475,7 +4371,6 @@
 
 		nsp-0-2-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens3 7>;
 
@@ -3496,7 +4391,6 @@
 
 		nsp-1-0-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens3 8>;
 
@@ -3517,7 +4411,6 @@
 
 		nsp-1-1-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens3 9>;
 
@@ -3538,7 +4431,6 @@
 
 		nsp-1-2-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens3 10>;
 
@@ -3558,9 +4450,6 @@
 		};
 
 		ddrss-1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens3 11>;
 
 			trips {
@@ -3579,9 +4468,6 @@
 		};
 
 		cpuss-1-1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens3 12>;
 
 			trips {
@@ -3689,6 +4575,53 @@
 		};
 	};
 
+	pcie0_ep: pcie-ep@1c00000 {
+		compatible = "qcom,sa8775p-pcie-ep";
+		reg = <0x0 0x01c00000 0x0 0x3000>,
+		      <0x0 0x40000000 0x0 0xf20>,
+		      <0x0 0x40000f20 0x0 0xa8>,
+		      <0x0 0x40001000 0x0 0x4000>,
+		      <0x0 0x40200000 0x0 0x100000>,
+		      <0x0 0x01c03000 0x0 0x1000>,
+		      <0x0 0x40005000 0x0 0x2000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+			    "mmio", "dma";
+
+		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+			<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+			<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+			<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-names = "global", "doorbell", "dma";
+
+		interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		dma-coherent;
+		iommus = <&pcie_smmu 0x0000 0x7f>;
+		resets = <&gcc GCC_PCIE_0_BCR>;
+		reset-names = "core";
+		power-domains = <&gcc PCIE_0_GDSC>;
+		phys = <&pcie0_phy>;
+		phy-names = "pciephy";
+		max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
+		num-lanes = <2>;
+
+		status = "disabled";
+	};
+
 	pcie0_phy: phy@1c04000 {
 		compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
 		reg = <0x0 0x1c04000 0x0 0x2000>;
@@ -3799,6 +4732,53 @@
 		};
 	};
 
+	pcie1_ep: pcie-ep@1c10000 {
+		compatible = "qcom,sa8775p-pcie-ep";
+		reg = <0x0 0x01c10000 0x0 0x3000>,
+		      <0x0 0x60000000 0x0 0xf20>,
+		      <0x0 0x60000f20 0x0 0xa8>,
+		      <0x0 0x60001000 0x0 0x4000>,
+		      <0x0 0x60200000 0x0 0x100000>,
+		      <0x0 0x01c13000 0x0 0x1000>,
+		      <0x0 0x60005000 0x0 0x2000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+			    "mmio", "dma";
+
+		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+			 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+			 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-names = "global", "doorbell", "dma";
+
+		interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		dma-coherent;
+		iommus = <&pcie_smmu 0x80 0x7f>;
+		resets = <&gcc GCC_PCIE_1_BCR>;
+		reset-names = "core";
+		power-domains = <&gcc PCIE_1_GDSC>;
+		phys = <&pcie1_phy>;
+		phy-names = "pciephy";
+		max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
+		num-lanes = <4>;
+
+		status = "disabled";
+	};
+
 	pcie1_phy: phy@1c14000 {
 		compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
 		reg = <0x0 0x1c14000 0x0 0x4000>;
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-clamshell.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor-clamshell.dtsi
new file mode 100644
index 00000000000..d91533b80e7
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-clamshell.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for clamshells
+ *
+ * Copyright 2024 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-coachz.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor-coachz.dtsi
index 7765c8f6490..3c124bbe2f4 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-coachz.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-coachz.dtsi
@@ -7,6 +7,7 @@
 
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-detachable.dtsi"
 
 /* Deleted nodes from sc7180-trogdor.dtsi */
 
@@ -25,7 +26,6 @@
 	thermal-zones {
 		skin_temp_thermal: skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6150_adc_tm 1>;
 			sustainable-power = <965>;
@@ -80,10 +80,6 @@
 };
 
 &cros_ec {
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb-switches";
-	};
-
 	cros_ec_proximity: proximity {
 		compatible = "google,cros-ec-mkbp-proximity";
 		label = "proximity-wifi";
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-detachable.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor-detachable.dtsi
new file mode 100644
index 00000000000..7c5d8a57ef7
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-detachable.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for detachables
+ *
+ * Copyright 2024 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi to modify cros_ec */
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-homestar.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor-homestar.dtsi
index 2ba3bbf3b9a..b2df22faafe 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-homestar.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-homestar.dtsi
@@ -5,9 +5,8 @@
  * Copyright 2021 Google LLC.
  */
 
-/* This file must be included after sc7180-trogdor.dtsi */
-
 #include "sc7180-trogdor-rt5682i-sku.dtsi"
+#include "sc7180-trogdor-detachable.dtsi"
 
 / {
 	/* BOARD-SPECIFIC TOP LEVEL NODES */
@@ -45,7 +44,6 @@
 	thermal-zones {
 		skin_temp_thermal: skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6150_adc_tm 1>;
 			sustainable-power = <965>;
@@ -135,12 +133,6 @@ ap_ts_pen_1v8: &i2c4 {
 	status = "okay";
 };
 
-&cros_ec {
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb-switches";
-	};
-};
-
 &panel {
 	compatible = "samsung,atna33xc20";
 	enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-kingoftown.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-kingoftown.dts
index d6db7d83adc..655bea928e5 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-kingoftown.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-kingoftown.dts
@@ -9,7 +9,7 @@
 
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-parade-ps8640.dtsi"
-#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-clamshell.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
 #include "sc7180-trogdor-rt5682s-sku.dtsi"
 
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r1-kb.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r1-kb.dts
index 919bfaea618..340cb119d0a 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r1-kb.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r1-kb.dts
@@ -12,6 +12,6 @@
 	compatible = "google,lazor-rev1-sku2", "google,lazor-rev2-sku2", "qcom,sc7180";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts
index eb20157f6af..d45e60e3eb9 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r1-lte.dts
@@ -17,6 +17,6 @@
 	status = "okay";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r10-kb.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r10-kb.dts
index 45d34718a1b..e906ce877b8 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r10-kb.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r10-kb.dts
@@ -18,6 +18,6 @@
 	compatible = "google,lazor-sku2", "qcom,sc7180";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r10-lte.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r10-lte.dts
index 79028d0dd1b..4b9ee15b09f 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r10-lte.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r10-lte.dts
@@ -22,6 +22,6 @@
 	status = "okay";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts
index 3459b81c562..a960553f399 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r3-kb.dts
@@ -21,6 +21,6 @@
 		"qcom,sc7180";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts
index ff8f47da109..82bd9ed7e21 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r3-lte.dts
@@ -25,6 +25,6 @@
 	status = "okay";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts
index faf52797297..6278c1715d3 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r9-kb.dts
@@ -18,6 +18,6 @@
 	compatible = "google,lazor-rev9-sku2", "qcom,sc7180";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts
index d737fd0637f..0ec1697ae2c 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor-r9-lte.dts
@@ -22,6 +22,6 @@
 	status = "okay";
 };
 
-&keyboard_backlight {
+&pwmleds {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor.dtsi
index e9f213d2771..c3fd6760de7 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-lazor.dtsi
@@ -5,8 +5,7 @@
  * Copyright 2020 Google LLC.
  */
 
-/* This file must be included after sc7180-trogdor.dtsi */
-#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-clamshell.dtsi"
 
 &ap_sar_sensor {
 	semtech,cs0-ground;
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi
index 8823edbb4d6..cc2c5610a27 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-pazquel.dtsi
@@ -5,8 +5,7 @@
  * Copyright 2021 Google LLC.
  */
 
-/* This file must be included after sc7180-trogdor.dtsi */
-#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-clamshell.dtsi"
 
 &ap_sar_sensor {
 	compatible = "semtech,sx9324";
@@ -83,6 +82,8 @@
 	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 };
 
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
 &en_pp3300_dx_edp {
 	pins = "gpio67";
 };
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-pompom.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
index 067813f5f43..ac8d4589e3f 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-pompom.dtsi
@@ -6,17 +6,13 @@
  */
 
 #include "sc7180-trogdor.dtsi"
-/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
-#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-clamshell.dtsi"
 #include "sc7180-trogdor-rt5682i-sku.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 
 / {
 	thermal-zones {
 		5v-choke-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <250>;
-
 			thermal-sensors = <&pm6150_adc_tm 1>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi
index 5f06842c683..00229b1515e 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -9,9 +9,7 @@
 
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-rt5682i-sku.dtsi"
-
-/* This board only has 1 USB Type-C port. */
-/delete-node/ &usb_c1;
+#include "sc7180-trogdor-detachable.dtsi"
 
 / {
 	ppvar_lcd: ppvar-lcd-regulator {
@@ -47,12 +45,6 @@
 	status = "okay";
 };
 
-&cros_ec {
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb-switches";
-	};
-};
-
 &gpio_keys {
 	status = "okay";
 };
@@ -136,6 +128,11 @@ pp3300_disp_on: &pp3300_dx_edp {
 	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 };
 
+/* This board only has 1 USB Type-C port. */
+&usb_c1 {
+	status = "disabled";
+};
+
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 /*
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-r1.dts b/dts/upstream/src/arm64/qcom/sc7180-trogdor-r1.dts
index c9667751a99..d393a2712ce 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-r1.dts
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-r1.dts
@@ -8,8 +8,7 @@
 /dts-v1/;
 
 #include "sc7180-trogdor.dtsi"
-/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
-#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-clamshell.dtsi"
 #include "sc7180-trogdor-rt5682i-sku.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi
index 305ad127246..af89d80426a 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-detachable.dtsi"
 
 / {
 	avdd_lcd: avdd-lcd-regulator {
@@ -50,7 +51,6 @@
 	thermal-zones {
 		skin_temp_thermal: skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6150_adc_tm 1>;
 			sustainable-power = <574>;
@@ -104,10 +104,6 @@
 	base_detection: cbas {
 		compatible = "google,cros-cbas";
 	};
-
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb-switches";
-	};
 };
 
 &i2c4 {
diff --git a/dts/upstream/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/upstream/src/arm64/qcom/sc7180-trogdor.dtsi
index 8513be29712..74ab321d333 100644
--- a/dts/upstream/src/arm64/qcom/sc7180-trogdor.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180-trogdor.dtsi
@@ -21,9 +21,6 @@
 / {
 	thermal-zones {
 		charger_thermal: charger-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm6150_adc_tm 0>;
 
 			trips {
@@ -359,10 +356,11 @@
 		#sound-dai-cells = <0>;
 	};
 
-	pwmleds {
+	pwmleds: pwmleds {
 		compatible = "pwm-leds";
+		status = "disabled";
+
 		keyboard_backlight: led-0 {
-			status = "disabled";
 			label = "cros_ec::kbd_backlight";
 			function = LED_FUNCTION_KBD_BACKLIGHT;
 			pwms = <&cros_ec_pwm 0>;
diff --git a/dts/upstream/src/arm64/qcom/sc7180.dtsi b/dts/upstream/src/arm64/qcom/sc7180.dtsi
index 4774a859bd7..b5ebf898032 100644
--- a/dts/upstream/src/arm64/qcom/sc7180.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7180.dtsi
@@ -1582,8 +1582,7 @@
 		};
 
 		ufs_mem_phy: phy@1d87000 {
-			compatible = "qcom,sc7180-qmp-ufs-phy",
-				     "qcom,sm7150-qmp-ufs-phy";
+			compatible = "qcom,sc7180-qmp-ufs-phy";
 			reg = <0 0x01d87000 0 0x1000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -3067,6 +3066,7 @@
 				iommus = <&apps_smmu 0x540 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
@@ -4036,7 +4036,6 @@
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
 			sustainable-power = <1052>;
@@ -4085,7 +4084,6 @@
 
 		cpu1_thermal: cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
 			sustainable-power = <1052>;
@@ -4134,7 +4132,6 @@
 
 		cpu2_thermal: cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
 			sustainable-power = <1052>;
@@ -4183,7 +4180,6 @@
 
 		cpu3_thermal: cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
 			sustainable-power = <1052>;
@@ -4232,7 +4228,6 @@
 
 		cpu4_thermal: cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
 			sustainable-power = <1052>;
@@ -4281,7 +4276,6 @@
 
 		cpu5_thermal: cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
 			sustainable-power = <1052>;
@@ -4330,7 +4324,6 @@
 
 		cpu6_thermal: cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 9>;
 			sustainable-power = <1425>;
@@ -4371,7 +4364,6 @@
 
 		cpu7_thermal: cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
 			sustainable-power = <1425>;
@@ -4412,7 +4404,6 @@
 
 		cpu8_thermal: cpu8-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 11>;
 			sustainable-power = <1425>;
@@ -4453,7 +4444,6 @@
 
 		cpu9_thermal: cpu9-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
 			sustainable-power = <1425>;
@@ -4494,7 +4484,6 @@
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -4515,7 +4504,6 @@
 
 		cpuss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -4535,7 +4523,6 @@
 
 		cpuss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -4555,7 +4542,6 @@
 
 		gpuss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -4583,7 +4569,6 @@
 
 		gpuss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -4611,7 +4596,6 @@
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -4632,7 +4616,6 @@
 
 		cwlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -4653,7 +4636,6 @@
 
 		audio-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -4674,7 +4656,6 @@
 
 		ddr-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -4695,7 +4676,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -4716,7 +4696,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -4737,7 +4716,6 @@
 
 		mdm-core-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -4758,7 +4736,6 @@
 
 		mdm-dsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -4779,7 +4756,6 @@
 
 		npu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 8>;
 
@@ -4800,7 +4776,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 9>;
 
diff --git a/dts/upstream/src/arm64/qcom/sc7280-idp.dtsi b/dts/upstream/src/arm64/qcom/sc7280-idp.dtsi
index a0059527d9e..7370aa0dbf0 100644
--- a/dts/upstream/src/arm64/qcom/sc7280-idp.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7280-idp.dtsi
@@ -495,7 +495,6 @@
 };
 
 &uart5 {
-	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
 
diff --git a/dts/upstream/src/arm64/qcom/sc7280-qcard.dtsi b/dts/upstream/src/arm64/qcom/sc7280-qcard.dtsi
index f9b96bd2477..7d1d5bbbbbd 100644
--- a/dts/upstream/src/arm64/qcom/sc7280-qcard.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7280-qcard.dtsi
@@ -427,7 +427,6 @@
 };
 
 uart_dbg: &uart5 {
-	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
 
diff --git a/dts/upstream/src/arm64/qcom/sc7280.dtsi b/dts/upstream/src/arm64/qcom/sc7280.dtsi
index fc9ec367e3a..3d841068340 100644
--- a/dts/upstream/src/arm64/qcom/sc7280.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc7280.dtsi
@@ -24,6 +24,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,lpass.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -710,6 +711,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sc7280", "qcom,scm";
+			qcom,dload-mode = <&tcsr_2 0x13000>;
 		};
 	};
 
@@ -1440,12 +1442,12 @@
 			};
 
 			uart5: serial@994000 {
-				compatible = "qcom,geni-uart";
+				compatible = "qcom,geni-debug-uart";
 				reg = <0 0x00994000 0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				clock-names = "se";
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>;
+				pinctrl-0 = <&qup_uart5_tx>, <&qup_uart5_rx>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7280_CX>;
 				operating-points-v2 = <&qup_opp_table>;
@@ -2129,6 +2131,8 @@
 			reg = <0 0x016e0000 0 0x1c080>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
 		};
 
 		aggre2_noc: interconnect@1700000 {
@@ -2136,6 +2140,7 @@
 			compatible = "qcom,sc7280-aggre2-noc";
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
 		};
 
 		mmss_noc: interconnect@1740000 {
@@ -2989,6 +2994,18 @@
 			dma-coherent;
 		};
 
+		gfx_0_tbu: tbu@3dd9000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x3dd9000 0x0 0x1000>;
+			qcom,stream-id-range = <&adreno_smmu 0x0 0x400>;
+		};
+
+		gfx_1_tbu: tbu@3ddd000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x3ddd000 0x0 0x1000>;
+			qcom,stream-id-range = <&adreno_smmu 0x400 0x400>;
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sc7280-mpss-pas";
 			reg = <0 0x04080000 0 0x10000>;
@@ -3762,6 +3779,75 @@
 				label = "lpass";
 				qcom,remote-pid = <2>;
 
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1801 0x0>;
+
+							dai@0 {
+								reg = <0>;
+							};
+
+							dai@1 {
+								reg = <1>;
+							};
+
+							dai@2 {
+								reg = <2>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
@@ -4150,6 +4236,7 @@
 				iommus = <&apps_smmu 0xe0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
@@ -5407,16 +5494,6 @@
 				function = "qup04";
 			};
 
-			qup_uart5_cts: qup-uart5-cts-state {
-				pins = "gpio20";
-				function = "qup05";
-			};
-
-			qup_uart5_rts: qup-uart5-rts-state {
-				pins = "gpio21";
-				function = "qup05";
-			};
-
 			qup_uart5_tx: qup-uart5-tx-state {
 				pins = "gpio22";
 				function = "qup05";
@@ -5802,6 +5879,83 @@
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		anoc_1_tbu: tbu@151dd000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151dd000 0x0 0x1000>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qcom,stream-id-range = <&apps_smmu 0x0 0x400>;
+		};
+
+		anoc_2_tbu: tbu@151e1000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151e1000 0x0 0x1000>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qcom,stream-id-range = <&apps_smmu 0x400 0x400>;
+		};
+
+		mnoc_hf_0_tbu: tbu@151e5000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151e5000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x800 0x400>;
+		};
+
+		mnoc_hf_1_tbu: tbu@151e9000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151e9000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0xc00 0x400>;
+		};
+
+		compute_dsp_1_tbu: tbu@151ed000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151ed000 0x0 0x1000>;
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU1_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x1000 0x400>;
+		};
+
+		compute_dsp_0_tbu: tbu@151f1000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151f1000 0x0 0x1000>;
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x1400 0x400>;
+		};
+
+		adsp_tbu: tbu@151f5000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151f5000 0x0 0x1000>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &lpass_ag_noc SLAVE_LPASS_CORE_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qcom,stream-id-range = <&apps_smmu 0x1800 0x400>;
+		};
+
+		anoc_1_pcie_tbu: tbu@151f9000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151f9000 0x0 0x1000>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
+		};
+
+		mnoc_sf_0_tbu: tbu@151fd000 {
+			compatible = "qcom,sc7280-tbu";
+			reg = <0x0 0x151fd000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x2000 0x400>;
+		};
+
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
@@ -5991,10 +6145,12 @@
 		};
 	};
 
+	sound: sound {
+	};
+
 	thermal_zones: thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -6038,7 +6194,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -6082,7 +6237,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -6126,7 +6280,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -6170,7 +6323,6 @@
 
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -6214,7 +6366,6 @@
 
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -6258,7 +6409,6 @@
 
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -6302,7 +6452,6 @@
 
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -6346,7 +6495,6 @@
 
 		cpu8-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -6390,7 +6538,6 @@
 
 		cpu9-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -6434,7 +6581,6 @@
 
 		cpu10-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -6478,7 +6624,6 @@
 
 		cpu11-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -6522,7 +6667,6 @@
 
 		aoss0-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -6543,7 +6687,6 @@
 
 		aoss1-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -6564,7 +6707,6 @@
 
 		cpuss0-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -6584,7 +6726,6 @@
 
 		cpuss1-thermal {
 			polling-delay-passive = <0>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -6604,7 +6745,6 @@
 
 		gpuss0-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -6632,7 +6772,6 @@
 
 		gpuss1-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -6659,9 +6798,6 @@
 		};
 
 		nspss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -6680,9 +6816,6 @@
 		};
 
 		nspss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
@@ -6701,9 +6834,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
@@ -6722,9 +6852,6 @@
 		};
 
 		ddr-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
@@ -6743,9 +6870,6 @@
 		};
 
 		mdmss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
@@ -6764,9 +6888,6 @@
 		};
 
 		mdmss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -6785,9 +6906,6 @@
 		};
 
 		mdmss2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -6806,9 +6924,6 @@
 		};
 
 		mdmss3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
@@ -6827,9 +6942,6 @@
 		};
 
 		camera0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 11>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts b/dts/upstream/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
index 6af99116c71..5b226577f9d 100644
--- a/dts/upstream/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/dts/upstream/src/arm64/qcom/sc8180x-lenovo-flex-5g.dts
@@ -68,7 +68,7 @@
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_prim_role_switch>;
+						remote-endpoint = <&usb_prim_dwc3_hs>;
 					};
 				};
 
@@ -103,7 +103,7 @@
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_sec_role_switch>;
+						remote-endpoint = <&usb_sec_dwc3_hs>;
 					};
 				};
 
@@ -582,6 +582,10 @@
 	dr_mode = "host";
 };
 
+&usb_prim_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_prim_qmpphy_dp_in {
 	remote-endpoint = <&mdss_dp0_out>;
 };
@@ -590,8 +594,8 @@
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_prim_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
+&usb_sec_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
 };
 
 &usb_sec_hsphy {
@@ -619,10 +623,6 @@
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_sec_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &usb_sec {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sc8180x-pmics.dtsi b/dts/upstream/src/arm64/qcom/sc8180x-pmics.dtsi
index ddc84282f14..1c6f12fafe1 100644
--- a/dts/upstream/src/arm64/qcom/sc8180x-pmics.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc8180x-pmics.dtsi
@@ -13,7 +13,6 @@
 	thermal-zones {
 		pmc8180-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmc8180_temp>;
 
@@ -40,7 +39,6 @@
 
 		pmc8180c-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pmc8180c_temp>;
 
diff --git a/dts/upstream/src/arm64/qcom/sc8180x-primus.dts b/dts/upstream/src/arm64/qcom/sc8180x-primus.dts
index bfee60c93cc..65d923497a0 100644
--- a/dts/upstream/src/arm64/qcom/sc8180x-primus.dts
+++ b/dts/upstream/src/arm64/qcom/sc8180x-primus.dts
@@ -71,7 +71,7 @@
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_prim_role_switch>;
+						remote-endpoint = <&usb_prim_dwc3_hs>;
 					};
 				};
 
@@ -106,7 +106,7 @@
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_sec_role_switch>;
+						remote-endpoint = <&usb_sec_dwc3_hs>;
 					};
 				};
 
@@ -648,6 +648,10 @@
 	dr_mode = "host";
 };
 
+&usb_prim_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_prim_qmpphy_dp_in {
 	remote-endpoint = <&mdss_dp0_out>;
 };
@@ -656,10 +660,6 @@
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_prim_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
-};
-
 &usb_sec_hsphy {
 	vdda-pll-supply = <&vreg_l5e_0p88>;
 	vdda18-supply = <&vreg_l12a_1p8>;
@@ -685,10 +685,6 @@
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_sec_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &usb_sec {
 	status = "okay";
 };
@@ -697,6 +693,10 @@
 	dr_mode = "host";
 };
 
+&usb_sec_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &wifi {
 	memory-region = <&wlan_mem>;
 
diff --git a/dts/upstream/src/arm64/qcom/sc8180x.dtsi b/dts/upstream/src/arm64/qcom/sc8180x.dtsi
index 581a70c34fd..6e707d993ae 100644
--- a/dts/upstream/src/arm64/qcom/sc8180x.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc8180x.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8180x.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -1890,7 +1891,7 @@
 			power-domains = <&gcc PCIE_3_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_3 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			phys = <&pcie3_phy>;
@@ -2012,7 +2013,7 @@
 			power-domains = <&gcc PCIE_1_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_1 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			phys = <&pcie1_phy>;
@@ -2134,7 +2135,7 @@
 			power-domains = <&gcc PCIE_2_GDSC>;
 
 			interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_2 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			phys = <&pcie2_phy>;
@@ -2245,18 +2246,13 @@
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			#phy-cells = <0>;
 
 			status = "disabled";
 		};
 
-		ipa_virt: interconnect@1e00000 {
-			compatible = "qcom,sc8180x-ipa-virt";
-			reg = <0 0x01e00000 0 0x1000>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -2511,28 +2507,25 @@
 			status = "disabled";
 		};
 
-		usb_prim_qmpphy: phy@88e9000 {
+		usb_prim_qmpphy: phy@88e8000 {
 			compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x38>,
-			      <0 0x088ea000 0 0x40>;
-			reg-names = "reg-base", "dp_com";
+			reg = <0 0x088e8000 0 0x3000>;
+
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
 			clock-names = "aux",
-				      "ref_clk_src",
 				      "ref",
-				      "com_aux";
+				      "com_aux",
+				      "usb3_pipe";
+
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
 			reset-names = "phy", "common";
 
 			#clock-cells = <1>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#phy-cells = <1>;
 
 			status = "disabled";
 
@@ -2546,59 +2539,40 @@
 					usb_prim_qmpphy_out: endpoint {};
 				};
 
+				port@1 {
+					reg = <1>;
+
+					usb_prim_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_prim_dwc3_ss>;
+					};
+				};
+
 				port@2 {
 					reg = <2>;
 
 					usb_prim_qmpphy_dp_in: endpoint {};
 				};
 			};
-
-			usb_prim_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_prim_phy_pipe_clk_src";
-			};
-
-			usb_prim_dpphy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
 		};
 
 		usb_sec_qmpphy: phy@88ee000 {
 			compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
-			reg = <0 0x088ee000 0 0x18c>,
-			      <0 0x088ed000 0 0x10>,
-			      <0 0x088ef000 0 0x40>;
-			reg-names = "reg-base", "dp_com";
+			reg = <0 0x088ed000 0 0x3000>;
+
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
 			clock-names = "aux",
-				      "ref_clk_src",
 				      "ref",
-				      "com_aux";
+				      "com_aux",
+				      "usb3_pipe";
 			resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>,
 				 <&gcc GCC_USB3_PHY_SEC_BCR>;
 			reset-names = "phy", "common";
 
 			#clock-cells = <1>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#phy-cells = <1>;
 
 			status = "disabled";
 
@@ -2612,37 +2586,20 @@
 					usb_sec_qmpphy_out: endpoint {};
 				};
 
+				port@1 {
+					reg = <1>;
+
+					usb_sec_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_sec_dwc3_ss>;
+					};
+				};
+
 				port@2 {
 					reg = <2>;
 
 					usb_sec_qmpphy_dp_in: endpoint {};
 				};
 			};
-
-			usb_sec_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088ee200 0 0x200>,
-				      <0 0x088ee400 0 0x200>,
-				      <0 0x088eec00 0 0x218>,
-				      <0 0x088ee600 0 0x200>,
-				      <0 0x088ee800 0 0x200>,
-				      <0 0x088eea00 0 0x100>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_sec_phy_pipe_clk_src";
-			};
-
-			usb_sec_dpphy: dp-phy@88ef200 {
-				reg = <0 0x088ef200 0 0x200>,
-				      <0 0x088ef400 0 0x200>,
-				      <0 0x088efa00 0 0x200>,
-				      <0 0x088ef600 0 0x200>,
-				      <0 0x088ef800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-				clock-output-names = "qmp_dptx1_phy_pll_link_clk",
-						     "qmp_dptx1_phy_pll_vco_div_clk";
-			};
 		};
 
 		system-cache-controller@9200000 {
@@ -2714,11 +2671,26 @@
 				iommus = <&apps_smmu 0x140 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>;
+				phys = <&usb_prim_hsphy>, <&usb_prim_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_prim_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_prim_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_prim_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_prim_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -2771,11 +2743,26 @@
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
+				phys = <&usb_sec_hsphy>, <&usb_sec_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_sec_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_sec_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_sec_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_sec_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -3089,9 +3076,10 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>;
+				assigned-clock-parents = <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
-				phys = <&usb_prim_dpphy>;
+				phys = <&usb_prim_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				#sound-dai-cells = <0>;
@@ -3166,9 +3154,10 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
-				assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>;
+				assigned-clock-parents = <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
-				phys = <&usb_sec_dpphy>;
+				phys = <&usb_sec_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				#sound-dai-cells = <0>;
@@ -3311,21 +3300,27 @@
 			compatible = "qcom,sc8180x-dispcc";
 			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&sleep_clk>,
-				 <&usb_prim_dpphy 0>,
-				 <&usb_prim_dpphy 1>,
-				 <&usb_sec_dpphy 0>,
-				 <&usb_sec_dpphy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&edp_phy 0>,
-				 <&edp_phy 1>;
+				 <&edp_phy 1>,
+				 <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
-				      "sleep_clk",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
 				      "dp_phy_pll_link_clk",
 				      "dp_phy_pll_vco_div_clk",
-				      "dptx1_phy_pll_link_clk",
-				      "dptx1_phy_pll_vco_div_clk",
 				      "edp_phy_pll_link_clk",
-				      "edp_phy_pll_vco_div_clk";
+				      "edp_phy_pll_vco_div_clk",
+				      "dptx1_phy_pll_link_clk",
+				      "dptx1_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SC8180X_MMCX>;
 			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
@@ -3371,7 +3366,6 @@
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		sram@c3f0000 {
@@ -3774,7 +3768,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -3789,7 +3782,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -3804,7 +3796,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -3819,7 +3810,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -3834,7 +3824,6 @@
 
 		cpu4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -3849,7 +3838,6 @@
 
 		cpu5-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -3864,7 +3852,6 @@
 
 		cpu6-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -3879,7 +3866,6 @@
 
 		cpu7-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -3894,7 +3880,6 @@
 
 		cpu4-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -3909,7 +3894,6 @@
 
 		cpu5-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -3924,7 +3908,6 @@
 
 		cpu6-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -3939,7 +3922,6 @@
 
 		cpu7-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -3954,7 +3936,6 @@
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -3969,7 +3950,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -3984,7 +3964,6 @@
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -3999,7 +3978,6 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 15>;
 
@@ -4012,16 +3990,27 @@
 
 			trips {
 				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -4036,7 +4025,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -4051,7 +4039,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -4066,7 +4053,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -4081,7 +4067,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -4096,7 +4081,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -4111,7 +4095,6 @@
 
 		compute-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -4126,7 +4109,6 @@
 
 		mdm-dsp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -4141,7 +4123,6 @@
 
 		npu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 8>;
 
@@ -4156,7 +4137,6 @@
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 11>;
 
@@ -4169,10 +4149,22 @@
 
 			trips {
 				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 	};
diff --git a/dts/upstream/src/arm64/qcom/sc8280xp-crd.dts b/dts/upstream/src/arm64/qcom/sc8280xp-crd.dts
index 372b35fb844..b98b2f7752b 100644
--- a/dts/upstream/src/arm64/qcom/sc8280xp-crd.dts
+++ b/dts/upstream/src/arm64/qcom/sc8280xp-crd.dts
@@ -56,7 +56,7 @@
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_0_role_switch>;
+						remote-endpoint = <&usb_0_dwc3_hs>;
 					};
 				};
 
@@ -91,7 +91,7 @@
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_1_role_switch>;
+						remote-endpoint = <&usb_1_dwc3_hs>;
 					};
 				};
 
@@ -675,6 +675,10 @@
 	dr_mode = "host";
 };
 
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_0_hsphy {
 	vdda-pll-supply = <&vreg_l9d>;
 	vdda18-supply = <&vreg_l1c>;
@@ -700,10 +704,6 @@
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_0_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
-};
-
 &usb_1 {
 	status = "okay";
 };
@@ -712,6 +712,10 @@
 	dr_mode = "host";
 };
 
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l4b>;
 	vdda18-supply = <&vreg_l1c>;
@@ -737,10 +741,6 @@
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_1_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &xo_board_clk {
 	clock-frequency = <38400000>;
 };
diff --git a/dts/upstream/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/dts/upstream/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 4bf99b6b6e5..b27143f8186 100644
--- a/dts/upstream/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/dts/upstream/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -117,7 +117,7 @@
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_0_role_switch>;
+						remote-endpoint = <&usb_0_dwc3_hs>;
 					};
 				};
 
@@ -152,7 +152,7 @@
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_1_role_switch>;
+						remote-endpoint = <&usb_1_dwc3_hs>;
 					};
 				};
 
@@ -297,9 +297,30 @@
 	};
 
 	thermal-zones {
+		pm8008-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8008>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
 		skin-temp-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8280_adc_tm 5>;
 
 			trips {
@@ -671,6 +692,85 @@
 	};
 };
 
+&i2c11 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c11_default>;
+
+	status = "okay";
+
+	pm8008: pmic@c {
+		compatible = "qcom,pm8008";
+		reg = <0xc>;
+
+		interrupts-extended = <&tlmm 41 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+
+		vdd-l1-l2-supply = <&vreg_s11b>;
+		vdd-l3-l4-supply = <&vreg_bob>;
+		vdd-l5-supply = <&vreg_bob>;
+		vdd-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm8008_default>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pm8008 0 0 2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		#thermal-sensor-cells = <0>;
+
+		regulators {
+			vreg_l1q: ldo1 {
+				regulator-name = "vreg_l1q";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vreg_l2q: ldo2 {
+				regulator-name = "vreg_l2q";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vreg_l3q: ldo3 {
+				regulator-name = "vreg_l3q";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vreg_l4q: ldo4 {
+				regulator-name = "vreg_l4q";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vreg_l5q: ldo5 {
+				regulator-name = "vreg_l5q";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vreg_l6q: ldo6 {
+				regulator-name = "vreg_l6q";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vreg_l7q: ldo7 {
+				regulator-name = "vreg_l7q";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+		};
+	};
+};
+
 &i2c21 {
 	clock-frequency = <400000>;
 
@@ -1132,6 +1232,10 @@
 	dr_mode = "host";
 };
 
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_0_hsphy {
 	vdda-pll-supply = <&vreg_l9d>;
 	vdda18-supply = <&vreg_l1c>;
@@ -1157,10 +1261,6 @@
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_0_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
-};
-
 &usb_1 {
 	status = "okay";
 };
@@ -1169,6 +1269,10 @@
 	dr_mode = "host";
 };
 
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l4b>;
 	vdda18-supply = <&vreg_l1c>;
@@ -1194,10 +1298,6 @@
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_1_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &usb_2 {
 	status = "okay";
 };
@@ -1356,6 +1456,13 @@
 		bias-disable;
 	};
 
+	i2c11_default: i2c11-default-state {
+		pins = "gpio18", "gpio19";
+		function = "qup11";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
 	i2c21_default: i2c21-default-state {
 		pins = "gpio81", "gpio82";
 		function = "qup21";
@@ -1459,6 +1566,22 @@
 		};
 	};
 
+	pm8008_default: pm8008-default-state {
+		int-pins {
+			pins = "gpio41";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		reset-n-pins {
+			pins = "gpio42";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	spkr_1_sd_n_default: spkr-1-sd-n-default-state {
 		perst-n-pins {
 			pins = "gpio178";
diff --git a/dts/upstream/src/arm64/qcom/sc8280xp-pmics.dtsi b/dts/upstream/src/arm64/qcom/sc8280xp-pmics.dtsi
index 945de77911d..1e3babf2e40 100644
--- a/dts/upstream/src/arm64/qcom/sc8280xp-pmics.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc8280xp-pmics.dtsi
@@ -14,7 +14,7 @@
 	thermal-zones {
 		pm8280_1_thermal: pm8280-1-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm8280_1_temp_alarm>;
 
 			trips {
@@ -34,7 +34,7 @@
 
 		pm8280_2_thermal: pm8280-2-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pm8280_2_temp_alarm>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sc8280xp.dtsi b/dts/upstream/src/arm64/qcom/sc8280xp.dtsi
index 59f0a850671..80a57aa2283 100644
--- a/dts/upstream/src/arm64/qcom/sc8280xp.dtsi
+++ b/dts/upstream/src/arm64/qcom/sc8280xp.dtsi
@@ -3222,6 +3222,14 @@
 					usb_0_qmpphy_out: endpoint {};
 				};
 
+				port@1 {
+					reg = <1>;
+
+					usb_0_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_0_dwc3_ss>;
+					};
+				};
+
 				port@2 {
 					reg = <2>;
 
@@ -3275,6 +3283,14 @@
 					usb_1_qmpphy_out: endpoint {};
 				};
 
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
 				port@2 {
 					reg = <2>;
 
@@ -3560,8 +3576,23 @@
 				phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_0_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_0_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_0_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_0_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -3622,8 +3653,23 @@
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_1_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -5833,7 +5879,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -5848,7 +5893,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -5863,7 +5907,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -5878,7 +5921,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -5893,7 +5935,6 @@
 
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -5908,7 +5949,6 @@
 
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -5923,7 +5963,6 @@
 
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -5938,7 +5977,6 @@
 
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -5953,7 +5991,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -5967,13 +6004,25 @@
 		};
 
 		gpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+			polling-delay-passive = <250>;
 
 			thermal-sensors = <&tsens2 2>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu-crit {
+				gpu_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -5983,7 +6032,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 15>;
 
diff --git a/dts/upstream/src/arm64/qcom/sda660-inforce-ifc6560.dts b/dts/upstream/src/arm64/qcom/sda660-inforce-ifc6560.dts
index 702ab49bbc5..60412281ab2 100644
--- a/dts/upstream/src/arm64/qcom/sda660-inforce-ifc6560.dts
+++ b/dts/upstream/src/arm64/qcom/sda660-inforce-ifc6560.dts
@@ -96,6 +96,18 @@
 
 		vin-supply = <&vph_pwr>;
 	};
+
+	/*
+	 * this is also used for APC1 CPU power, touching it resets the board
+	 */
+	vreg_l10a_1p8: vreg-l10a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_l10a_1p8";
+		regulator-min-microvolt = <1804000>;
+		regulator-max-microvolt = <1896000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &adsp_pil {
@@ -220,6 +232,7 @@
 	status = "okay";
 
 	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
 };
 
@@ -227,6 +240,7 @@
 	status = "okay";
 
 	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
 	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
 };
 
@@ -464,5 +478,6 @@
 
 &usb3_qmpphy {
 	vdda-phy-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sdm450-lenovo-tbx605f.dts b/dts/upstream/src/arm64/qcom/sdm450-lenovo-tbx605f.dts
new file mode 100644
index 00000000000..175befc02b2
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/sdm450-lenovo-tbx605f.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Neil Armstrong <neil.armstrong@linaro.org>
+ */
+/dts-v1/;
+
+#include "sdm450.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/ {
+	model = "Lenovo Smart Tab M10";
+	compatible = "lenovo,tbx605f", "qcom,sdm450";
+	chassis-type = "tablet";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (1200 * 1920 * 3)>;
+
+			width = <1200>;
+			height = <1920>;
+			stride = <(1200 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	reserved-memory {
+		other_ext_region@0 {
+			no-map;
+			reg = <0x00 0x84500000 0x00 0x2300000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&pm8953_l10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1200>;
+		touchscreen-size-y = <1920>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <1156000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <0x08>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&wcnss {
+	vddpx-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
+};
diff --git a/dts/upstream/src/arm64/qcom/sdm450-motorola-ali.dts b/dts/upstream/src/arm64/qcom/sdm450-motorola-ali.dts
index e27f3c5d5bb..a288d52fb6d 100644
--- a/dts/upstream/src/arm64/qcom/sdm450-motorola-ali.dts
+++ b/dts/upstream/src/arm64/qcom/sdm450-motorola-ali.dts
@@ -248,5 +248,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/dts/upstream/src/arm64/qcom/sdm630.dtsi b/dts/upstream/src/arm64/qcom/sdm630.dtsi
index f5921b80ef9..c7e3764a8cf 100644
--- a/dts/upstream/src/arm64/qcom/sdm630.dtsi
+++ b/dts/upstream/src/arm64/qcom/sdm630.dtsi
@@ -1302,6 +1302,7 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 
 				phys = <&qusb2phy0>, <&usb3_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -2422,7 +2423,6 @@
 	thermal-zones {
 		aoss-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -2437,7 +2437,6 @@
 
 		cpuss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -2452,7 +2451,6 @@
 
 		cpuss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -2467,7 +2465,6 @@
 
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 3>;
 
@@ -2488,7 +2485,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -2509,7 +2505,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -2530,7 +2525,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -2557,7 +2551,6 @@
 
 		pwr-cluster-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -2578,7 +2571,6 @@
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -2591,20 +2583,32 @@
 
 			trips {
 				gpu_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 	};
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 1 0xf08>,
-				 <GIC_PPI 2 0xf08>,
-				 <GIC_PPI 3 0xf08>,
-				 <GIC_PPI 0 0xf08>;
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
 
diff --git a/dts/upstream/src/arm64/qcom/sdm632-fairphone-fp3.dts b/dts/upstream/src/arm64/qcom/sdm632-fairphone-fp3.dts
index e2708c74e95..2c1172aa97e 100644
--- a/dts/upstream/src/arm64/qcom/sdm632-fairphone-fp3.dts
+++ b/dts/upstream/src/arm64/qcom/sdm632-fairphone-fp3.dts
@@ -143,6 +143,10 @@
 	status = "okay";
 };
 
+&pmi632_vib {
+	status = "okay";
+};
+
 &sdhc_1 {
 	status = "okay";
 	vmmc-supply = <&pm8953_l8>;
diff --git a/dts/upstream/src/arm64/qcom/sdm632-motorola-ocean.dts b/dts/upstream/src/arm64/qcom/sdm632-motorola-ocean.dts
index c82d6e628d2..2f55db0c8ce 100644
--- a/dts/upstream/src/arm64/qcom/sdm632-motorola-ocean.dts
+++ b/dts/upstream/src/arm64/qcom/sdm632-motorola-ocean.dts
@@ -287,5 +287,6 @@
 };
 
 &usb3_dwc3 {
+	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
 };
diff --git a/dts/upstream/src/arm64/qcom/sdm670.dtsi b/dts/upstream/src/arm64/qcom/sdm670.dtsi
index 80e81c4233b..187c6698835 100644
--- a/dts/upstream/src/arm64/qcom/sdm670.dtsi
+++ b/dts/upstream/src/arm64/qcom/sdm670.dtsi
@@ -509,6 +509,18 @@
 			no-map;
 		};
 
+		smem@86000000 {
+			compatible = "qcom,smem";
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		tz_mem: tz@86200000 {
+			reg = <0 0x86200000 0 0x2d00000>;
+			no-map;
+		};
+
 		camera_mem: camera-mem@8ab00000 {
 			reg = <0 0x8ab00000 0 0x500000>;
 			no-map;
@@ -1139,6 +1151,12 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
 		tlmm: pinctrl@3400000 {
 			compatible = "qcom,sdm670-tlmm";
 			reg = <0 0x03400000 0 0xc00000>;
diff --git a/dts/upstream/src/arm64/qcom/sdm845-mtp.dts b/dts/upstream/src/arm64/qcom/sdm845-mtp.dts
index 76bfa786612..2391f842c90 100644
--- a/dts/upstream/src/arm64/qcom/sdm845-mtp.dts
+++ b/dts/upstream/src/arm64/qcom/sdm845-mtp.dts
@@ -51,9 +51,6 @@
 
 	thermal-zones {
 		xo_thermal: xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm8998_adc_tm 1>;
 
 			trips {
@@ -66,9 +63,6 @@
 		};
 
 		msm_thermal: msm-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm8998_adc_tm 2>;
 
 			trips {
@@ -81,9 +75,6 @@
 		};
 
 		pa_thermal: pa-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm8998_adc_tm 3>;
 
 			trips {
@@ -96,9 +87,6 @@
 		};
 
 		quiet_thermal: quiet-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&pm8998_adc_tm 4>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sdm845.dtsi b/dts/upstream/src/arm64/qcom/sdm845.dtsi
index 10de2bd46ff..54077549b9d 100644
--- a/dts/upstream/src/arm64/qcom/sdm845.dtsi
+++ b/dts/upstream/src/arm64/qcom/sdm845.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -2666,6 +2667,8 @@
 				      "ref_aux",
 				      "qref";
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
@@ -4028,6 +4031,35 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+			orientation-switch;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&dp_out>;
+					};
+				};
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
@@ -4106,8 +4138,29 @@
 				iommus = <&apps_smmu 0x740 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -4161,6 +4214,7 @@
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -4598,7 +4652,9 @@
 
 					port@1 {
 						reg = <1>;
-						dp_out: endpoint { };
+						dp_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_dp_in>;
+						};
 					};
 				};
 
@@ -5105,6 +5161,78 @@
 				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		anoc_1_tbu: tbu@150c5000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150c5000 0x0 0x1000>;
+			interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU1_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x0 0x400>;
+		};
+
+		anoc_2_tbu: tbu@150c9000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150c9000 0x0 0x1000>;
+			interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_TBU2_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x400 0x400>;
+		};
+
+		mnoc_hf_0_tbu: tbu@150cd000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150cd000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x800 0x400>;
+		};
+
+		mnoc_hf_1_tbu: tbu@150d1000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150d1000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mmss_noc SLAVE_MNOC_HF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0xc00 0x400>;
+		};
+
+		mnoc_sf_0_tbu: tbu@150d5000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150d5000 0x0 0x1000>;
+			interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mmss_noc SLAVE_MNOC_SF_MEM_NOC QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x1000 0x400>;
+		};
+
+		compute_dsp_tbu: tbu@150d9000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150d9000 0x0 0x1000>;
+			interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			qcom,stream-id-range = <&apps_smmu 0x1400 0x400>;
+		};
+
+		adsp_tbu: tbu@150dd000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150dd000 0x0 0x1000>;
+			interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_AUDIO_TBU_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x1800 0x400>;
+		};
+
+		anoc_1_pcie_tbu: tbu@150e1000 {
+			compatible = "qcom,sdm845-tbu";
+			reg = <0x0 0x150e1000 0x0 0x1000>;
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>;
+			qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
+		};
+
 		lpasscc: clock-controller@17014000 {
 			compatible = "qcom,sdm845-lpasscc";
 			reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>;
@@ -5358,7 +5486,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -5385,7 +5512,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -5412,7 +5538,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -5439,7 +5564,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -5466,7 +5590,6 @@
 
 		cpu4-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -5493,7 +5616,6 @@
 
 		cpu5-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -5520,7 +5642,6 @@
 
 		cpu6-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -5547,7 +5668,6 @@
 
 		cpu7-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -5574,7 +5694,6 @@
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -5589,7 +5708,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -5609,7 +5727,6 @@
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -5629,7 +5746,6 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -5642,16 +5758,27 @@
 
 			trips {
 				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -5664,16 +5791,27 @@
 
 			trips {
 				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -5688,7 +5826,6 @@
 
 		q6-modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -5703,7 +5840,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -5718,7 +5854,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -5733,7 +5868,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -5748,7 +5882,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -5763,7 +5896,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -5778,7 +5910,6 @@
 
 		modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
diff --git a/dts/upstream/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts b/dts/upstream/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
index 47dc42f6e93..f18050848cd 100644
--- a/dts/upstream/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/dts/upstream/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
@@ -370,6 +370,66 @@
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
+
+	embedded-controller@70 {
+		compatible = "lenovo,yoga-c630-ec";
+		reg = <0x70>;
+
+		interrupts-extended = <&tlmm 20 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_int_state>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "host";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ucsi0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ucsi0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					ucsi0_sbu: endpoint {
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "host";
+
+			/*
+			 * connected to the onboard USB hub, orientation is
+			 * handled by the controller
+			 */
+		};
+	};
 };
 
 &i2c3 {
@@ -494,6 +554,7 @@
 &ipa {
 	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm850/LENOVO/81JL/ipa_fws.elf";
 	status = "okay";
 };
 
@@ -694,6 +755,13 @@
 
 		bias-disable;
 	};
+
+	ec_int_state: ec-int-state {
+		pins = "gpio20";
+		function = "gpio";
+
+		bias-disable;
+	};
 };
 
 &uart6 {
@@ -741,6 +809,10 @@
 	dr_mode = "host";
 };
 
+&usb_1_dwc3_hs {
+	remote-endpoint = <&ucsi0_hs_in>;
+};
+
 &usb_1_hsphy {
 	status = "okay";
 
@@ -761,6 +833,10 @@
 	vdda-pll-supply = <&vdda_usb1_ss_core>;
 };
 
+&usb_1_qmpphy_out {
+	remote-endpoint = <&ucsi0_ss_in>;
+};
+
 &usb_2 {
 	status = "okay";
 };
@@ -834,6 +910,7 @@
 	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
+	qcom,ath10k-calibration-variant = "Lenovo_C630";
 };
 
 &crypto {
diff --git a/dts/upstream/src/arm64/qcom/sdx75-idp.dts b/dts/upstream/src/arm64/qcom/sdx75-idp.dts
index f76e72fb207..fde16308c7e 100644
--- a/dts/upstream/src/arm64/qcom/sdx75-idp.dts
+++ b/dts/upstream/src/arm64/qcom/sdx75-idp.dts
@@ -41,6 +41,29 @@
 
 		vin-supply = <&vph_ext>;
 	};
+
+	reg_2v952_vcc: regulator-2v952-vcc {
+		compatible = "regulator-gpio";
+		regulator-name = "2v952_vcc";
+		regulator-min-microvolt = <1650000>;
+		regulator-max-microvolt = <3600000>;
+		enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+		gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+		states = <1650000 0>, <3600000 1>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		regulator-boot-on;
+
+		vin-supply = <&vph_ext>;
+	};
+
+	reg_2v95_vdd: regulator-2v95-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "2v95_vdd";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+		vin-supply = <&reg_2v952_vcc>;
+	};
 };
 
 &apps_rsc {
@@ -259,8 +282,30 @@
 	status = "okay";
 };
 
+&sdhc {
+	cd-gpios = <&tlmm 103 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_2v95_vdd>;
+	vqmmc-supply = <&reg_2v952_vcc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc1_default &sd_cd>;
+	pinctrl-1 = <&sdc1_sleep &sd_cd>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <110 6>;
+
+	sd_cd: sd-cd-state {
+		pins = "gpio103";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart1 {
diff --git a/dts/upstream/src/arm64/qcom/sdx75.dtsi b/dts/upstream/src/arm64/qcom/sdx75.dtsi
index da1704061d5..9b93f6501d5 100644
--- a/dts/upstream/src/arm64/qcom/sdx75.dtsi
+++ b/dts/upstream/src/arm64/qcom/sdx75.dtsi
@@ -8,9 +8,12 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sdx75.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -405,7 +408,42 @@
 		};
 	};
 
-	smem: qcom,smem {
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smem: smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_mem>;
 		hwlocks = <&tcsr_mutex 3>;
@@ -441,6 +479,37 @@
 			#power-domain-cells = <1>;
 		};
 
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sdx75-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma: dma-controller@900000 {
+			compatible = "qcom,sdx75-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x00900000 0x0 0x60000>;
+			#dma-cells = <3>;
+			interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			status = "disabled";
+		};
+
 		qupv3_id_0: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x009c0000 0x0 0x2000>;
@@ -457,6 +526,52 @@
 			ranges;
 			status = "disabled";
 
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
 			uart1: serial@984000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0x0 0x00984000 0x0 0x4000>;
@@ -475,6 +590,229 @@
 						"sleep";
 				status = "disabled";
 			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@990000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_uart4_default>, <&qup_uart4_cts_rts>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0099c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0099c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
 		};
 
 		usb_hsphy: phy@ff4000 {
@@ -538,6 +876,59 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sdx75-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+		};
+
+		sdhc: mmc@8804000 {
+			compatible = "qcom,sdx75-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x08804000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+			iommus = <&apps_smmu 0x00a0 0x0>;
+			qcom,dll-config = <0x0007442c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			interconnects = <&system_noc MASTER_SDCC_1 &mc_virt SLAVE_EBI1>,
+					<&gem_noc MASTER_APPSS_PROC &system_noc SLAVE_SDCC_1>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+			bus-width = <4>;
+			dma-coherent;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0>;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
 		usb: usb@a6f8800 {
 			compatible = "qcom,sdx75-dwc3", "qcom,dwc3";
 			reg = <0x0 0x0a6f8800 0x0 0x400>;
@@ -627,6 +1018,17 @@
 			interrupt-controller;
 		};
 
+		aoss_qmp: power-controller@c310000 {
+			compatible = "qcom,sdx75-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c310000 0 0x1000>;
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c400000 0x0 0x3000>,
@@ -661,6 +1063,145 @@
 			#interrupt-cells = <2>;
 			wakeup-parent = <&pdc>;
 
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio14", "gpio15";
+				function = "qup_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "qup_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "qup_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio116", "gpio117";
+				function = "qup_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio11";
+				function = "qup_se0";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup_se0";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio17";
+				function = "qup_se2";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio14", "gpio15", "gpio16";
+				function = "qup_se2";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio55";
+				function = "qup_se3";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup_se3";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio115";
+				function = "qup_se6";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio112", "gpio113", "gpio114";
+				function = "qup_se6";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio119";
+				function = "qup_se7";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio116", "gpio117", "gpio118";
+				function = "qup_se7";
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			qup_uart4_cts_rts: qup-uart4-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio52", "gpio53";
+				function = "qup_se3";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart4_default: qup-uart4-default-state {
+				/* TX, RX */
+				pins = "gpio54", "gpio55";
+				function = "qup_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
 			qupv3_se1_2uart_active: qupv3-se1-2uart-active-state {
 				tx-pins {
 					pins = "gpio12";
@@ -683,6 +1224,46 @@
 				drive-strength = <2>;
 				bias-pull-down;
 			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		apps_smmu: iommu@15000000 {
diff --git a/dts/upstream/src/arm64/qcom/sm4250-oneplus-billie2.dts b/dts/upstream/src/arm64/qcom/sm4250-oneplus-billie2.dts
index 2c7a12983da..9153a5a55ed 100644
--- a/dts/upstream/src/arm64/qcom/sm4250-oneplus-billie2.dts
+++ b/dts/upstream/src/arm64/qcom/sm4250-oneplus-billie2.dts
@@ -240,6 +240,7 @@
 };
 
 &usb_dwc3 {
+	/delete-property/ usb-role-switch;
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
 
diff --git a/dts/upstream/src/arm64/qcom/sm4450.dtsi b/dts/upstream/src/arm64/qcom/sm4450.dtsi
index 603c962661c..9c9919e78fb 100644
--- a/dts/upstream/src/arm64/qcom/sm4450.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm4450.dtsi
@@ -29,6 +29,14 @@
 			clock-frequency = <32000>;
 			#clock-cells = <0>;
 		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
 	};
 
 	cpus {
@@ -39,10 +47,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
 			L2_0: l2-cache {
@@ -63,10 +73,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
 			L2_100: l2-cache {
@@ -81,10 +93,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
 			L2_200: l2-cache {
@@ -99,10 +113,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
 			L2_300: l2-cache {
@@ -117,10 +133,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
 			L2_400: l2-cache {
@@ -135,10 +153,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
 			L2_500: l2-cache {
@@ -153,10 +173,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a78";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 
 			L2_600: l2-cache {
@@ -171,10 +193,12 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a78";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 
 			L2_700: l2-cache {
@@ -268,9 +292,14 @@
 		reg = <0x0 0xa0000000 0x0 0x0>;
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -526,6 +555,19 @@
 			};
 		};
 
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm4450-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
 	};
 
 	timer {
diff --git a/dts/upstream/src/arm64/qcom/sm6115-fxtec-pro1x.dts b/dts/upstream/src/arm64/qcom/sm6115-fxtec-pro1x.dts
index 98eb072fa91..4a30024aa48 100644
--- a/dts/upstream/src/arm64/qcom/sm6115-fxtec-pro1x.dts
+++ b/dts/upstream/src/arm64/qcom/sm6115-fxtec-pro1x.dts
@@ -234,6 +234,7 @@
 };
 
 &usb_dwc3 {
+	/delete-property/ usb-role-switch;
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
 };
diff --git a/dts/upstream/src/arm64/qcom/sm6115.dtsi b/dts/upstream/src/arm64/qcom/sm6115.dtsi
index 9ed062150aa..e374733f3b8 100644
--- a/dts/upstream/src/arm64/qcom/sm6115.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm6115.dtsi
@@ -1088,6 +1088,8 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
+			resets = <&gcc GCC_SDCC1_BCR>;
+
 			power-domains = <&rpmpd SM6115_VDDCX>;
 			operating-points-v2 = <&sdhc1_opp_table>;
 			iommus = <&apps_smmu 0x00c0 0x0>;
@@ -1231,6 +1233,8 @@
 				      "ref_aux",
 				      "qref";
 
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
@@ -1656,6 +1660,7 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,parkmode-disable-ss-quirk;
 
 				usb-role-switch;
 
@@ -3012,8 +3017,6 @@
 
 	thermal-zones {
 		mapss-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -3032,8 +3035,6 @@
 		};
 
 		cdsp-hvx-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -3052,8 +3053,6 @@
 		};
 
 		wlan-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -3072,8 +3071,6 @@
 		};
 
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -3092,8 +3089,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -3112,8 +3107,6 @@
 		};
 
 		modem1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -3132,8 +3125,6 @@
 		};
 
 		cpu4-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -3158,8 +3149,6 @@
 		};
 
 		cpu5-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -3184,8 +3173,6 @@
 		};
 
 		cpu6-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -3210,8 +3197,6 @@
 		};
 
 		cpu7-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -3236,8 +3221,6 @@
 		};
 
 		cpu45-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -3262,8 +3245,6 @@
 		};
 
 		cpu67-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -3288,8 +3269,6 @@
 		};
 
 		cpu0123-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -3314,8 +3293,6 @@
 		};
 
 		modem0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
@@ -3334,8 +3311,6 @@
 		};
 
 		display-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 14>;
 
 			trips {
@@ -3354,8 +3329,8 @@
 		};
 
 		gpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+			polling-delay-passive = <250>;
+
 			thermal-sensors = <&tsens0 15>;
 
 			cooling-maps {
@@ -3367,13 +3342,13 @@
 
 			trips {
 				gpu_alert0: trip-point0 {
-					temperature = <115000>;
-					hysteresis = <5000>;
+					temperature = <85000>;
+					hysteresis = <1000>;
 					type = "passive";
 				};
 
 				trip-point1 {
-					temperature = <125000>;
+					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
diff --git a/dts/upstream/src/arm64/qcom/sm6115p-lenovo-j606f.dts b/dts/upstream/src/arm64/qcom/sm6115p-lenovo-j606f.dts
index 54da053a804..9d78bb3f719 100644
--- a/dts/upstream/src/arm64/qcom/sm6115p-lenovo-j606f.dts
+++ b/dts/upstream/src/arm64/qcom/sm6115p-lenovo-j606f.dts
@@ -359,6 +359,7 @@
 };
 
 &usb_dwc3 {
+	/delete-property/ usb-role-switch;
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
 
diff --git a/dts/upstream/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts b/dts/upstream/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 08046f866f6..dcd05f303b7 100644
--- a/dts/upstream/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/dts/upstream/src/arm64/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -90,8 +90,6 @@
 
 	thermal-zones {
 		rf-pa0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 0>;
 
 			trips {
@@ -104,8 +102,6 @@
 		};
 
 		quiet-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <5000>;
 			thermal-sensors = <&pm6125_adc_tm 1>;
 
 			trips {
@@ -118,8 +114,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 2>;
 
 			trips {
@@ -132,8 +126,6 @@
 		};
 
 		rf-pa1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 3>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sm6125-xiaomi-laurel-sprout.dts b/dts/upstream/src/arm64/qcom/sm6125-xiaomi-laurel-sprout.dts
index a49d3ebb193..994fb0412fc 100644
--- a/dts/upstream/src/arm64/qcom/sm6125-xiaomi-laurel-sprout.dts
+++ b/dts/upstream/src/arm64/qcom/sm6125-xiaomi-laurel-sprout.dts
@@ -84,8 +84,6 @@
 
 	thermal-zones {
 		rf-pa0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 0>;
 
 			trips {
@@ -98,8 +96,6 @@
 		};
 
 		quiet-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <5000>;
 			thermal-sensors = <&pm6125_adc_tm 1>;
 
 			trips {
@@ -112,8 +108,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 2>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sm6125.dtsi b/dts/upstream/src/arm64/qcom/sm6125.dtsi
index 98ab0835608..777c380c2fa 100644
--- a/dts/upstream/src/arm64/qcom/sm6125.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm6125.dtsi
@@ -1588,10 +1588,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 1 0xf08
-			      GIC_PPI 2 0xf08
-			      GIC_PPI 3 0xf08
-			      GIC_PPI 0 0xf08>;
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <19200000>;
 	};
 };
diff --git a/dts/upstream/src/arm64/qcom/sm6350-sony-xperia-lena-pdx213.dts b/dts/upstream/src/arm64/qcom/sm6350-sony-xperia-lena-pdx213.dts
index dddd6e44d28..bf23033a294 100644
--- a/dts/upstream/src/arm64/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/dts/upstream/src/arm64/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -293,7 +293,7 @@
 		compatible = "samsung,s6sy761";
 		reg = <0x48>;
 		interrupt-parent = <&tlmm>;
-		interrupts = <22 0x2008>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&pm6350_l11>;
 		avdd-supply = <&touch_en_vreg>;
 
@@ -375,6 +375,7 @@
 };
 
 &usb_1_dwc3 {
+	/delete-property/ usb-role-switch;
 	maximum-speed = "super-speed";
 	dr_mode = "peripheral";
 };
diff --git a/dts/upstream/src/arm64/qcom/sm6350.dtsi b/dts/upstream/src/arm64/qcom/sm6350.dtsi
index 84ff20a96c8..7986ddb30f6 100644
--- a/dts/upstream/src/arm64/qcom/sm6350.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm6350.dtsi
@@ -1197,6 +1197,8 @@
 				      "ref_aux",
 				      "qref";
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
@@ -1321,6 +1323,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "adsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -1580,6 +1583,7 @@
 					compatible = "qcom,fastrpc";
 					qcom,glink-channels = "fastrpcglink-apps-dsp";
 					label = "cdsp";
+					qcom,non-secure-domain;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -1713,10 +1717,39 @@
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
+			orientation-switch;
+
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		dc_noc: interconnect@9160000 {
@@ -1890,8 +1923,30 @@
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs_out: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -2831,9 +2886,6 @@
 
 	thermal-zones {
 		aoss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -2846,9 +2898,6 @@
 		};
 
 		aoss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
@@ -2861,9 +2910,6 @@
 		};
 
 		audio-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
@@ -2876,9 +2922,6 @@
 		};
 
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
@@ -2891,9 +2934,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -2919,9 +2959,6 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -2947,9 +2984,6 @@
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -2975,9 +3009,6 @@
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -3003,9 +3034,6 @@
 		};
 
 		cpu4-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -3031,9 +3059,6 @@
 		};
 
 		cpu5-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -3059,9 +3084,6 @@
 		};
 
 		cpu6-left-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -3087,9 +3109,6 @@
 		};
 
 		cpu6-right-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -3115,9 +3134,6 @@
 		};
 
 		cpu7-left-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -3143,9 +3159,6 @@
 		};
 
 		cpu7-right-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -3171,9 +3184,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -3186,9 +3196,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -3201,9 +3208,6 @@
 		};
 
 		cwlan-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
@@ -3216,9 +3220,6 @@
 		};
 
 		ddr-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -3231,21 +3232,20 @@
 		};
 
 		gpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+			polling-delay-passive = <250>;
 
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
 				gpuss0_alert0: trip-point0 {
-					temperature = <95000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
 				gpuss0-crit {
-					temperature = <115000>;
-					hysteresis = <0>;
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -3259,21 +3259,20 @@
 		};
 
 		gpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
+			polling-delay-passive = <250>;
 
 			thermal-sensors = <&tsens0 14>;
 
 			trips {
 				gpuss1_alert0: trip-point0 {
-					temperature = <95000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
 				gpuss1-crit {
-					temperature = <115000>;
-					hysteresis = <0>;
+					temperature = <110000>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -3287,9 +3286,6 @@
 		};
 
 		modem-core0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
@@ -3302,9 +3298,6 @@
 		};
 
 		modem-core1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
@@ -3317,9 +3310,6 @@
 		};
 
 		modem-scl-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -3332,9 +3322,6 @@
 		};
 
 		modem-vec-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -3347,9 +3334,6 @@
 		};
 
 		npu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
@@ -3362,9 +3346,6 @@
 		};
 
 		q6-hvx-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
@@ -3377,9 +3358,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 11>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts b/dts/upstream/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts
index cca2c2eb88a..e04a3b8f81c 100644
--- a/dts/upstream/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ b/dts/upstream/src/arm64/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -142,7 +142,7 @@
 		compatible = "samsung,s6sy761";
 		reg = <0x48>;
 		interrupt-parent = <&tlmm>;
-		interrupts = <22 0x2008>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
 
 		vdd-supply = <&pm6125_l13>;
 		avdd-supply = <&touch_avdd>;
diff --git a/dts/upstream/src/arm64/qcom/sm6375.dtsi b/dts/upstream/src/arm64/qcom/sm6375.dtsi
index f40509d91bb..ddea681b536 100644
--- a/dts/upstream/src/arm64/qcom/sm6375.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm6375.dtsi
@@ -1837,9 +1837,6 @@
 
 	thermal-zones {
 		mapss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -1864,9 +1861,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -1891,9 +1885,6 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -1918,9 +1909,6 @@
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -1945,9 +1933,6 @@
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -1972,9 +1957,6 @@
 		};
 
 		cpu4-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -1999,9 +1981,6 @@
 		};
 
 		cpu5-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -2026,9 +2005,6 @@
 		};
 
 		cluster0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -2053,9 +2029,6 @@
 		};
 
 		cluster1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -2080,9 +2053,6 @@
 		};
 
 		cpu6-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -2107,9 +2077,6 @@
 		};
 
 		cpu7-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -2134,9 +2101,6 @@
 		};
 
 		cpu-unk0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -2161,9 +2125,6 @@
 		};
 
 		cpu-unk1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -2188,9 +2149,6 @@
 		};
 
 		gpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
@@ -2215,9 +2173,6 @@
 		};
 
 		gpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens0 14>;
 
 			trips {
@@ -2242,9 +2197,6 @@
 		};
 
 		mapss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
@@ -2269,9 +2221,6 @@
 		};
 
 		cwlan-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
@@ -2296,9 +2245,6 @@
 		};
 
 		audio-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
@@ -2323,9 +2269,6 @@
 		};
 
 		ddr-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -2350,9 +2293,6 @@
 		};
 
 		q6hvx-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
@@ -2377,9 +2317,6 @@
 		};
 
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
@@ -2404,9 +2341,6 @@
 		};
 
 		mdm-core0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
@@ -2431,9 +2365,6 @@
 		};
 
 		mdm-core1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
@@ -2458,9 +2389,6 @@
 		};
 
 		mdm-vec-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -2485,9 +2413,6 @@
 		};
 
 		msm-scl-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -2512,9 +2437,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sm7225-fairphone-fp4.dts b/dts/upstream/src/arm64/qcom/sm7225-fairphone-fp4.dts
index bc67e8c1fe4..2ee2561b57b 100644
--- a/dts/upstream/src/arm64/qcom/sm7225-fairphone-fp4.dts
+++ b/dts/upstream/src/arm64/qcom/sm7225-fairphone-fp4.dts
@@ -19,6 +19,7 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm7225.dtsi"
 #include "pm6150l.dtsi"
 #include "pm6350.dtsi"
@@ -92,10 +93,22 @@
 		};
 	};
 
+	msm_therm_sensor: thermal-sensor-msm {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>;
+		io-channel-names = "sensor-channel";
+	};
+
+	rear_cam_sensor: thermal-sensor-rear-cam {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&pm6150l_adc ADC5_GPIO2_100K_PU>;
+		io-channel-names = "sensor-channel";
+	};
+
 	thermal-zones {
 		chg-skin-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm7250b_adc_tm 0>;
 
 			trips {
@@ -108,8 +121,6 @@
 		};
 
 		conn-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm7250b_adc_tm 1>;
 
 			trips {
@@ -120,6 +131,119 @@
 				};
 			};
 		};
+
+		pa0-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pa1-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pm8008-thermal {
+			polling-delay-passive = <100>;
+			thermal-sensors = <&pm8008>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		quiet-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&rear_cam_sensor>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rfc-flash-thermal {
+			thermal-sensors = <&pm6150l_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&msm_therm_sensor>;
+
+			trips {
+				trip0 {
+					temperature = <45000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <55000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		xo-thermal {
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
 	};
 };
 
@@ -134,124 +258,145 @@
 		qcom,pmic-id = "a";
 
 		vreg_s1a: smps1 {
+			regulator-name = "vreg_s1a";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1200000>;
 		};
 
 		vreg_s2a: smps2 {
+			regulator-name = "vreg_s2a";
 			regulator-min-microvolt = <1503000>;
 			regulator-max-microvolt = <2048000>;
 		};
 
 		vreg_l2a: ldo2 {
+			regulator-name = "vreg_l2a";
 			regulator-min-microvolt = <1503000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
 			regulator-min-microvolt = <352000>;
 			regulator-max-microvolt = <801000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
 			regulator-min-microvolt = <1503000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
 			regulator-min-microvolt = <1710000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
 			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <3401000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l12a: ldo12 {
+			regulator-name = "vreg_l12a";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
 			regulator-min-microvolt = <570000>;
 			regulator-max-microvolt = <650000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l14a: ldo14 {
+			regulator-name = "vreg_l14a";
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l15a: ldo15 {
+			regulator-name = "vreg_l15a";
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1305000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l16a: ldo16 {
+			regulator-name = "vreg_l16a";
 			regulator-min-microvolt = <830000>;
 			regulator-max-microvolt = <921000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l18a: ldo18 {
+			regulator-name = "vreg_l18a";
 			regulator-min-microvolt = <788000>;
 			regulator-max-microvolt = <1049000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l19a: ldo19 {
+			regulator-name = "vreg_l19a";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1305000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l20a: ldo20 {
+			regulator-name = "vreg_l20a";
 			regulator-min-microvolt = <530000>;
 			regulator-max-microvolt = <801000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l21a: ldo21 {
+			regulator-name = "vreg_l21a";
 			regulator-min-microvolt = <751000>;
 			regulator-max-microvolt = <825000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l22a: ldo22 {
+			regulator-name = "vreg_l22a";
 			regulator-min-microvolt = <1080000>;
 			regulator-max-microvolt = <1305000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -263,41 +408,48 @@
 		qcom,pmic-id = "e";
 
 		vreg_s8e: smps8 {
+			regulator-name = "vreg_s8e";
 			regulator-min-microvolt = <313000>;
 			regulator-max-microvolt = <1395000>;
 		};
 
 		vreg_l1e: ldo1 {
+			regulator-name = "vreg_l1e";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <1980000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l2e: ldo2 {
+			regulator-name = "vreg_l2e";
 			regulator-min-microvolt = <1170000>;
 			regulator-max-microvolt = <1305000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l3e: ldo3 {
+			regulator-name = "vreg_l3e";
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1299000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4e: ldo4 {
+			regulator-name = "vreg_l4e";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l5e: ldo5 {
+			regulator-name = "vreg_l5e";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <2950000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -307,18 +459,21 @@
 		};
 
 		vreg_l7e: ldo7 {
+			regulator-name = "vreg_l7e";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <3544000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <2000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9e: ldo9 {
+			regulator-name = "vreg_l9e";
 			regulator-min-microvolt = <2700000>;
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -328,18 +483,21 @@
 		};
 
 		vreg_l10e: ldo10 {
+			regulator-name = "vreg_l10e";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3401000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11e: ldo11 {
+			regulator-name = "vreg_l11e";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3401000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_bob: bob {
+			regulator-name = "vreg_bob";
 			regulator-min-microvolt = <1620000>;
 			regulator-max-microvolt = <5492000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
@@ -407,7 +565,79 @@
 };
 
 &i2c10 {
-	/* PM8008 PMIC @ 8 and 9 */
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pm8008: pmic@8 {
+		compatible = "qcom,pm8008";
+		reg = <0x8>;
+
+		interrupts-extended = <&tlmm 59 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+
+		vdd-l1-l2-supply = <&vreg_s8e>;
+		vdd-l3-l4-supply = <&vreg_bob>;
+		vdd-l5-supply = <&vreg_bob>;
+		vdd-l6-supply = <&vreg_s2a>;
+		vdd-l7-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm8008_default>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pm8008 0 0 2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		#thermal-sensor-cells = <0>;
+
+		regulators {
+			vreg_l1p: ldo1 {
+				regulator-name = "vreg_l1p";
+				regulator-min-microvolt = <528000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vreg_l2p: ldo2 {
+				regulator-name = "vreg_l2p";
+				regulator-min-microvolt = <528000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vreg_l3p: ldo3 {
+				regulator-name = "vreg_l3p";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vreg_l4p: ldo4 {
+				regulator-name = "vreg_l4p";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2904000>;
+			};
+
+			vreg_l5p: ldo5 {
+				regulator-name = "vreg_l5p";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2900000>;
+			};
+
+			vreg_l6p: ldo6 {
+				regulator-name = "vreg_l6p";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vreg_l7p: ldo7 {
+				regulator-name = "vreg_l7p";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3140000>;
+			};
+		};
+	};
+
 	/* PX8618 @ 26 */
 	/* SMB1395 PMIC @ 34 */
 	/* awinic,aw8695 @ 5a */
@@ -462,6 +692,91 @@
 	status = "okay";
 };
 
+&pm6150l_adc {
+	pinctrl-0 = <&pm6150l_adc_default>;
+	pinctrl-names = "default";
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		label = "pa_therm1";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		label = "msm_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		label = "pa_therm0";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@53 {
+		reg = <ADC5_GPIO2_100K_PU>;
+		label = "rear_cam_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@54 {
+		reg = <ADC5_GPIO3_100K_PU>;
+		label = "rear_cam_flash_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+
+	channel@55 {
+		reg = <ADC5_GPIO4_100K_PU>;
+		label = "quiet_therm";
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,ratiometric;
+	};
+};
+
+&pm6150l_adc_tm {
+	status = "okay";
+
+	pa-therm1@0 {
+		reg = <0>;
+		io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+
+	pa-therm0@1 {
+		reg = <1>;
+		io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+
+	rear-cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+
+	quiet-therm@3 {
+		reg = <3>;
+		io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+};
+
 &pm6150l_flash {
 	status = "okay";
 
@@ -484,6 +799,14 @@
 	};
 };
 
+&pm6150l_gpios {
+	pm6150l_adc_default: adc-default-state {
+		pins = "gpio6", "gpio7", "gpio10";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+};
+
 &pm6150l_wled {
 	qcom,switching-freq = <800>;
 	qcom,current-limit-microamp = <20000>;
@@ -543,6 +866,64 @@
 	};
 };
 
+&pm7250b_typec {
+	vdd-pdphy-supply = <&vreg_l3a>;
+
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		/*
+		 * Disable USB Power Delivery for now, seems to need extra work
+		 * to support role switching while also letting the battery
+		 * charge still - without charger driver
+		 */
+		typec-power-opmode = "default";
+		pd-disable;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm7250b_hs_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm7250b_ss_in: endpoint {
+					remote-endpoint = <&usb_1_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm7250b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <1500000>;
+	status = "okay";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,ratiometric;
+	};
+};
+
 &pmk8350_rtc {
 	status = "okay";
 };
@@ -673,6 +1054,22 @@
 		 */
 		bias-pull-up;
 	};
+
+	pm8008_default: pm8008-default-state {
+		int-pins {
+			pins = "gpio59";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		reset-n-pins {
+			pins = "gpio58";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };
 
 &uart1 {
@@ -726,7 +1123,11 @@
 
 &usb_1_dwc3 {
 	maximum-speed = "super-speed";
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+};
+
+&usb_1_dwc3_hs_out {
+	remote-endpoint = <&pm7250b_hs_in>;
 };
 
 &usb_1_hsphy {
@@ -744,6 +1145,10 @@
 	status = "okay";
 };
 
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pm7250b_ss_in>;
+};
+
 &wifi {
 	vdd-0.8-cx-mx-supply = <&vreg_l4a>;
 	vdd-1.8-xo-supply = <&vreg_l7a>;
diff --git a/dts/upstream/src/arm64/qcom/sm8150-hdk.dts b/dts/upstream/src/arm64/qcom/sm8150-hdk.dts
index 6cb6f503fda..bac08f00b30 100644
--- a/dts/upstream/src/arm64/qcom/sm8150-hdk.dts
+++ b/dts/upstream/src/arm64/qcom/sm8150-hdk.dts
@@ -470,7 +470,6 @@
 
 &mdss_dp_out {
 	data-lanes = <0 1>;
-	remote-endpoint = <&usb_1_qmpphy_dp_in>;
 };
 
 &mdss_dsi0 {
@@ -556,7 +555,7 @@
 
 			port@0 {
 				reg = <0>;
-				pm8150b_role_switch_in: endpoint {
+				pm8150b_hs_in: endpoint {
 					remote-endpoint = <&usb_1_dwc3_hs>;
 				};
 			};
@@ -676,18 +675,10 @@
 	orientation-switch;
 };
 
-&usb_1_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp_out>;
-};
-
 &usb_1_qmpphy_out {
 	remote-endpoint = <&pm8150b_typec_mux_in>;
 };
 
-&usb_1_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &usb_2_qmpphy {
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
@@ -708,11 +699,7 @@
 };
 
 &usb_1_dwc3_hs {
-	remote-endpoint = <&pm8150b_role_switch_in>;
-};
-
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+	remote-endpoint = <&pm8150b_hs_in>;
 };
 
 &usb_2_dwc3 {
diff --git a/dts/upstream/src/arm64/qcom/sm8150.dtsi b/dts/upstream/src/arm64/qcom/sm8150.dtsi
index ff22e434666..3e236adb939 100644
--- a/dts/upstream/src/arm64/qcom/sm8150.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8150.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
+#include <dt-bindings/clock/qcom,videocc-sm8150.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8150.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -3507,6 +3508,7 @@
 					reg = <1>;
 
 					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -3514,6 +3516,7 @@
 					reg = <2>;
 
 					usb_1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp_out>;
 					};
 				};
 			};
@@ -3672,6 +3675,7 @@
 						reg = <1>;
 
 						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 						};
 					};
 				};
@@ -3735,6 +3739,19 @@
 			};
 		};
 
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sm8150-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		camnoc_virt: interconnect@ac00000 {
 			compatible = "qcom,sm8150-camnoc-virt";
 			reg = <0 0x0ac00000 0 0x1000>;
@@ -3894,6 +3911,7 @@
 						reg = <1>;
 
 						mdss_dp_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_dp_in>;
 						};
 					};
 				};
@@ -4577,7 +4595,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -4621,7 +4638,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -4665,7 +4681,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -4709,7 +4724,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -4753,7 +4767,6 @@
 
 		cpu4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -4797,7 +4810,6 @@
 
 		cpu5-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -4841,7 +4853,6 @@
 
 		cpu6-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -4885,7 +4896,6 @@
 
 		cpu7-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -4929,7 +4939,6 @@
 
 		cpu4-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -4973,7 +4982,6 @@
 
 		cpu5-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -5017,7 +5025,6 @@
 
 		cpu6-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -5061,7 +5068,6 @@
 
 		cpu7-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -5105,7 +5111,6 @@
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -5120,7 +5125,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -5140,7 +5144,6 @@
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -5160,7 +5163,6 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 15>;
 
@@ -5173,16 +5175,27 @@
 
 			trips {
 				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -5197,7 +5210,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -5212,7 +5224,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -5227,7 +5238,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -5242,7 +5252,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -5257,7 +5266,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -5272,7 +5280,6 @@
 
 		compute-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -5287,7 +5294,6 @@
 
 		modem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -5302,7 +5308,6 @@
 
 		npu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 8>;
 
@@ -5317,7 +5322,6 @@
 
 		modem-vec-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 9>;
 
@@ -5332,7 +5336,6 @@
 
 		modem-scl-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 10>;
 
@@ -5347,7 +5350,6 @@
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 11>;
 
@@ -5360,10 +5362,22 @@
 
 			trips {
 				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 	};
diff --git a/dts/upstream/src/arm64/qcom/sm8250-mtp.dts b/dts/upstream/src/arm64/qcom/sm8250-mtp.dts
index 7ef99038cb3..21b2ca1def8 100644
--- a/dts/upstream/src/arm64/qcom/sm8250-mtp.dts
+++ b/dts/upstream/src/arm64/qcom/sm8250-mtp.dts
@@ -53,8 +53,6 @@
 
 	thermal-zones {
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 0>;
 
 			trips {
@@ -67,8 +65,6 @@
 		};
 
 		conn-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150b_adc_tm 0>;
 
 			trips {
@@ -81,8 +77,6 @@
 		};
 
 		mmw-pa1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 2>;
 
 			trips {
@@ -95,8 +89,6 @@
 		};
 
 		mmw-pa2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 2>;
 
 			trips {
@@ -109,8 +101,6 @@
 		};
 
 		skin-msm-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 1>;
 
 			trips {
@@ -123,8 +113,6 @@
 		};
 
 		skin-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 1>;
 
 			trips {
@@ -137,8 +125,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 0>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi b/dts/upstream/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi
index e07d0311ecb..f6870d3f288 100644
--- a/dts/upstream/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8250-sony-xperia-edo.dtsi
@@ -520,7 +520,7 @@
 		compatible = "samsung,s6sy761";
 		reg = <0x48>;
 		interrupt-parent = <&tlmm>;
-		interrupts = <39 0x2008>;
+		interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
 		/* It's "vddio" downstream but it works anyway! */
 		vdd-supply = <&vreg_l1c_1p8>;
 		avdd-supply = <&vreg_l10c_3p3>;
diff --git a/dts/upstream/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi b/dts/upstream/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
index 41f11747487..3596dd328c3 100644
--- a/dts/upstream/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -659,8 +659,8 @@
 			port@0 {
 				reg = <0>;
 
-				pm8150b_role_switch_in: endpoint {
-					remote-endpoint = <&usb_1_role_switch_out>;
+				pm8150b_hs_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs_out>;
 				};
 			};
 		};
@@ -725,8 +725,8 @@
 	status = "okay";
 };
 
-&usb_1_role_switch_out {
-	remote-endpoint = <&pm8150b_role_switch_in>;
+&usb_1_dwc3_hs_out {
+	remote-endpoint = <&pm8150b_hs_in>;
 };
 
 &ufs_mem_hc {
diff --git a/dts/upstream/src/arm64/qcom/sm8250.dtsi b/dts/upstream/src/arm64/qcom/sm8250.dtsi
index 8ccade628f1..9d6c97d1fd9 100644
--- a/dts/upstream/src/arm64/qcom/sm8250.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8250.dtsi
@@ -2204,7 +2204,7 @@
 
 			status = "disabled";
 
-			pcie@0 {
+			pcieport0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
@@ -2580,6 +2580,8 @@
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			#phy-cells = <0>;
 
 			status = "disabled";
@@ -3936,6 +3938,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3947,6 +3951,10 @@
 
 				port@1 {
 					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss_out>;
+					};
 				};
 
 				port@2 {
@@ -4225,8 +4233,24 @@
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_1_role_switch_out: endpoint {};
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs_out: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
 				};
 			};
 		};
@@ -6275,7 +6299,6 @@
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -6319,7 +6342,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -6363,7 +6385,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -6407,7 +6428,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -6451,7 +6471,6 @@
 
 		cpu4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -6495,7 +6514,6 @@
 
 		cpu5-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -6539,7 +6557,6 @@
 
 		cpu6-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -6583,7 +6600,6 @@
 
 		cpu7-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -6627,7 +6643,6 @@
 
 		cpu4-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -6671,7 +6686,6 @@
 
 		cpu5-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -6715,7 +6729,6 @@
 
 		cpu6-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -6759,7 +6772,6 @@
 
 		cpu7-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -6803,7 +6815,6 @@
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -6818,7 +6829,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -6838,7 +6848,6 @@
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -6858,7 +6867,6 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 15>;
 
@@ -6871,16 +6879,27 @@
 
 			trips {
 				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -6895,7 +6914,6 @@
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -6910,7 +6928,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -6925,7 +6942,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -6940,7 +6956,6 @@
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -6955,7 +6970,6 @@
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -6970,7 +6984,6 @@
 
 		compute-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -6985,7 +6998,6 @@
 
 		npu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -7000,7 +7012,6 @@
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 8>;
 
@@ -7013,10 +7024,22 @@
 
 			trips {
 				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 	};
diff --git a/dts/upstream/src/arm64/qcom/sm8350-hdk.dts b/dts/upstream/src/arm64/qcom/sm8350-hdk.dts
index 4c25ab2f567..895adce59e7 100644
--- a/dts/upstream/src/arm64/qcom/sm8350-hdk.dts
+++ b/dts/upstream/src/arm64/qcom/sm8350-hdk.dts
@@ -486,17 +486,10 @@
 
 &mdss_dp {
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp0_out: endpoint {
-				data-lanes = <0 1>;
-				remote-endpoint = <&usb_1_qmpphy_dp_in>;
-			};
-		};
-	};
+&mdss_dp_out {
+	data-lanes = <0 1>;
 };
 
 &mpss {
@@ -864,10 +857,6 @@
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	status = "okay";
 
@@ -881,22 +870,12 @@
 
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p88>;
-
-	orientation-switch;
-};
-
-&usb_1_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
 };
 
 &usb_1_qmpphy_out {
 	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
-&usb_1_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &usb_2 {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/qcom/sm8350.dtsi b/dts/upstream/src/arm64/qcom/sm8350.dtsi
index f7c4700f00c..38ee0850c33 100644
--- a/dts/upstream/src/arm64/qcom/sm8350.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8350.dtsi
@@ -301,8 +301,18 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-x1 {
+		compatible = "arm,cortex-x1-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
@@ -1779,6 +1789,8 @@
 				      "ref_aux",
 				      "qref";
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
@@ -2256,6 +2268,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			status = "disabled";
 
 			ports {
@@ -2273,6 +2287,7 @@
 					reg = <1>;
 
 					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -2280,6 +2295,7 @@
 					reg = <2>;
 
 					usb_1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp_out>;
 					};
 				};
 			};
@@ -2405,6 +2421,7 @@
 						reg = <1>;
 
 						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 						};
 					};
 				};
@@ -2626,6 +2643,14 @@
 							remote-endpoint = <&dpu_intf0_out>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_dp_in>;
+						};
+					};
 				};
 
 				dp_opp_table: opp-table {
@@ -3665,7 +3690,6 @@
 	thermal_zones: thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -3709,7 +3733,6 @@
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -3753,7 +3776,6 @@
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -3797,7 +3819,6 @@
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -3841,7 +3862,6 @@
 
 		cpu4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -3885,7 +3905,6 @@
 
 		cpu5-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -3929,7 +3948,6 @@
 
 		cpu6-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -3973,7 +3991,6 @@
 
 		cpu7-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -4017,7 +4034,6 @@
 
 		cpu4-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -4061,7 +4077,6 @@
 
 		cpu5-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -4105,7 +4120,6 @@
 
 		cpu6-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -4149,7 +4163,6 @@
 
 		cpu7-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -4193,7 +4206,6 @@
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -4208,7 +4220,6 @@
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -4228,7 +4239,6 @@
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -4248,7 +4258,6 @@
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -4263,7 +4272,6 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -4276,16 +4284,27 @@
 
 			trips {
 				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -4298,16 +4317,27 @@
 
 			trips {
 				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
 					hysteresis = <1000>;
 					type = "hot";
 				};
+
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 
 		nspss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -4322,7 +4352,6 @@
 
 		nspss2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -4337,7 +4366,6 @@
 
 		nspss3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -4352,7 +4380,6 @@
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -4367,7 +4394,6 @@
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -4382,7 +4408,6 @@
 
 		modem1-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 8>;
 
@@ -4397,7 +4422,6 @@
 
 		modem2-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 9>;
 
@@ -4412,7 +4436,6 @@
 
 		modem3-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 10>;
 
@@ -4427,7 +4450,6 @@
 
 		modem4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 11>;
 
@@ -4442,7 +4464,6 @@
 
 		camera-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 12>;
 
@@ -4457,7 +4478,6 @@
 
 		cam-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 13>;
 
diff --git a/dts/upstream/src/arm64/qcom/sm8450-hdk.dts b/dts/upstream/src/arm64/qcom/sm8450-hdk.dts
index 3be46b56c72..a754b8fe916 100644
--- a/dts/upstream/src/arm64/qcom/sm8450-hdk.dts
+++ b/dts/upstream/src/arm64/qcom/sm8450-hdk.dts
@@ -138,7 +138,7 @@
 	thermal-zones {
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 2>;
 
 			trips {
@@ -152,7 +152,7 @@
 
 		rear-tof-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 5>;
 
 			trips {
@@ -166,7 +166,7 @@
 
 		skin-msm-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 1>;
 
 			trips {
@@ -180,7 +180,7 @@
 
 		therm1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 3>;
 
 			trips {
@@ -194,7 +194,7 @@
 
 		therm2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 6>;
 
 			trips {
@@ -208,7 +208,7 @@
 
 		usb-conn-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 7>;
 
 			trips {
@@ -222,7 +222,7 @@
 
 		wide-rfc-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&pmk8350_adc_tm 4>;
 
 			trips {
@@ -235,8 +235,6 @@
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pmk8350_adc_tm 0>;
 
 			trips {
@@ -674,17 +672,10 @@
 
 &mdss_dp0 {
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp0_out: endpoint {
-				data-lanes = <0 1>;
-				remote-endpoint = <&usb_1_qmpphy_dp_in>;
-			};
-		};
-	};
+&mdss_dp0_out {
+	data-lanes = <0 1>;
 };
 
 &pcie0 {
@@ -1114,10 +1105,6 @@
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	status = "okay";
 
@@ -1131,22 +1118,12 @@
 
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p91>;
-
-	orientation-switch;
-};
-
-&usb_1_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
 };
 
 &usb_1_qmpphy_out {
 	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
-&usb_1_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &vamacro {
 	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
diff --git a/dts/upstream/src/arm64/qcom/sm8450-sony-xperia-nagara.dtsi b/dts/upstream/src/arm64/qcom/sm8450-sony-xperia-nagara.dtsi
index 8b29fcf483a..17dbb67868a 100644
--- a/dts/upstream/src/arm64/qcom/sm8450-sony-xperia-nagara.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -488,7 +488,7 @@
 		compatible = "samsung,s6sy761";
 		reg = <0x48>;
 		interrupt-parent = <&tlmm>;
-		interrupts = <21 0x2008>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&pm8350c_l2>;
 		avdd-supply = <&pm8350c_l3>;
 
diff --git a/dts/upstream/src/arm64/qcom/sm8450.dtsi b/dts/upstream/src/arm64/qcom/sm8450.dtsi
index 616461fcbab..9bafb3b350f 100644
--- a/dts/upstream/src/arm64/qcom/sm8450.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8450.dtsi
@@ -754,8 +754,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&sleep_clk>,
 				 <&pcie0_phy>,
-				 <&pcie1_phy>,
-				 <0>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+				 <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
 				 <&ufs_mem_phy 0>,
 				 <&ufs_mem_phy 1>,
 				 <&ufs_mem_phy 2>,
@@ -1803,6 +1803,12 @@
 					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
 				 <&pcie0_phy>,
@@ -1845,8 +1851,35 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
 
+			operating-points-v2 = <&pcie0_opp_table>;
+
 			status = "disabled";
 
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+			};
+
 			pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -1932,6 +1965,12 @@
 					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
 				 <&pcie1_phy>,
@@ -1972,8 +2011,56 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
 
+			operating-points-v2 = <&pcie1_opp_table>;
+
 			status = "disabled";
 
+			pcie1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+			};
+
 			pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -2001,7 +2088,7 @@
 				      "pipe";
 
 			clock-output-names = "pcie_1_pipe_clk";
-			#clock-cells = <0>;
+			#clock-cells = <1>;
 
 			#phy-cells = <0>;
 
@@ -2304,6 +2391,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			status = "disabled";
 
 			ports {
@@ -2321,6 +2410,7 @@
 					reg = <1>;
 
 					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -2328,6 +2418,7 @@
 					reg = <2>;
 
 					usb_1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
 					};
 				};
 			};
@@ -3119,6 +3210,14 @@
 							remote-endpoint = <&dpu_intf0_out>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_dp_in>;
+						};
+		};
 				};
 
 				dp_opp_table: opp-table {
@@ -4362,9 +4461,10 @@
 			compatible = "qcom,sm8450-llcc";
 			reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>,
 			      <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>,
-			      <0 0x19a00000 0 0x80000>;
+			      <0 0x19a00000 0 0x80000>, <0 0x19c00000 0 0x80000>;
 			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
-				    "llcc3_base", "llcc_broadcast_base";
+				    "llcc3_base", "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -4429,6 +4529,8 @@
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
 				 <&gcc GCC_UFS_0_CLKREF_EN>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
@@ -4584,6 +4686,7 @@
 						reg = <1>;
 
 						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 						};
 					};
 				};
@@ -4610,8 +4713,6 @@
 
 	thermal-zones {
 		aoss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -4630,8 +4731,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -4650,8 +4749,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -4670,8 +4767,6 @@
 		};
 
 		cpuss3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -4690,8 +4785,6 @@
 		};
 
 		cpuss4-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -4710,8 +4803,6 @@
 		};
 
 		cpu4-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -4736,8 +4827,6 @@
 		};
 
 		cpu4-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -4762,8 +4851,6 @@
 		};
 
 		cpu5-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -4788,8 +4875,6 @@
 		};
 
 		cpu5-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -4814,8 +4899,6 @@
 		};
 
 		cpu6-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -4840,8 +4923,6 @@
 		};
 
 		cpu6-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -4866,8 +4947,6 @@
 		};
 
 		cpu7-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -4892,8 +4971,6 @@
 		};
 
 		cpu7-middle-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -4918,8 +4995,6 @@
 		};
 
 		cpu7-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
@@ -4945,7 +5020,7 @@
 
 		gpu-top-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens0 14>;
 
 			cooling-maps {
@@ -4956,35 +5031,29 @@
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				reset-mon-cfg {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
-				};
-
-				gpu_top_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens0 15>;
 
 			cooling-maps {
@@ -4995,35 +5064,27 @@
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-cfg {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu_bottom_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		aoss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
@@ -5042,8 +5103,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
@@ -5068,8 +5127,6 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
@@ -5094,8 +5151,6 @@
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -5120,8 +5175,6 @@
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
@@ -5147,7 +5200,7 @@
 
 		cdsp0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
@@ -5179,7 +5232,7 @@
 
 		cdsp1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 6>;
 
 			trips {
@@ -5211,7 +5264,7 @@
 
 		cdsp2-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 7>;
 
 			trips {
@@ -5242,8 +5295,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -5263,7 +5314,7 @@
 
 		mem-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -5288,8 +5339,6 @@
 		};
 
 		modem0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
@@ -5320,8 +5369,6 @@
 		};
 
 		modem1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 11>;
 
 			trips {
@@ -5352,8 +5399,6 @@
 		};
 
 		modem2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 12>;
 
 			trips {
@@ -5384,8 +5429,6 @@
 		};
 
 		modem3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 13>;
 
 			trips {
@@ -5416,8 +5459,6 @@
 		};
 
 		camera0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 14>;
 
 			trips {
@@ -5436,8 +5477,6 @@
 		};
 
 		camera1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 15>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/sm8550-hdk.dts b/dts/upstream/src/arm64/qcom/sm8550-hdk.dts
index 12d60a0ee09..2e12219006c 100644
--- a/dts/upstream/src/arm64/qcom/sm8550-hdk.dts
+++ b/dts/upstream/src/arm64/qcom/sm8550-hdk.dts
@@ -940,7 +940,6 @@
 };
 
 &mdss_dp0_out {
-	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 	data-lanes = <0 1>;
 };
 
@@ -979,10 +978,6 @@
 	status = "okay";
 };
 
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
-};
-
 &pm8550_gpios {
 	sdc2_card_det_n: sdc2-card-det-state {
 		pins = "gpio12";
@@ -1111,6 +1106,7 @@
 
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "SpkrLeft";
+		qcom,port-mapping = <1 2 3 7 10 13>;
 	};
 
 	/* WSA8845, Speaker South */
@@ -1128,6 +1124,7 @@
 
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "SpkrRight";
+		qcom,port-mapping = <4 5 6 7 11 13>;
 	};
 };
 
@@ -1258,19 +1255,10 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-};
-
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l1e_0p88>;
 	vdda12-supply = <&vreg_l3e_1p2>;
@@ -1284,23 +1272,13 @@
 	vdda-phy-supply = <&vreg_l3e_1p2>;
 	vdda-pll-supply = <&vreg_l3f_0p88>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
-&usb_dp_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
-};
-
 &usb_dp_qmpphy_out {
 	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
-&usb_dp_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &xo_board {
 	clock-frequency = <76800000>;
 };
diff --git a/dts/upstream/src/arm64/qcom/sm8550-mtp.dts b/dts/upstream/src/arm64/qcom/sm8550-mtp.dts
index 3d4ad5aac70..ab447fc252f 100644
--- a/dts/upstream/src/arm64/qcom/sm8550-mtp.dts
+++ b/dts/upstream/src/arm64/qcom/sm8550-mtp.dts
@@ -736,11 +736,6 @@
 
 &mdss_dp0_out {
 	data-lanes = <0 1>;
-	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
-};
-
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
 };
 
 &pcie0 {
@@ -847,6 +842,7 @@
 		sound-name-prefix = "SpkrLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3g_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
 	};
 
 	/* WSA8845 */
@@ -860,6 +856,7 @@
 		sound-name-prefix = "SpkrRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3g_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
 	};
 };
 
@@ -951,19 +948,10 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-};
-
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l1e_0p88>;
 	vdda12-supply = <&vreg_l3e_1p2>;
@@ -977,23 +965,13 @@
 	vdda-phy-supply = <&vreg_l3e_1p2>;
 	vdda-pll-supply = <&vreg_l3f_0p91>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
-&usb_dp_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
-};
-
 &usb_dp_qmpphy_out {
 	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
-&usb_dp_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &xo_board {
 	clock-frequency = <76800000>;
 };
diff --git a/dts/upstream/src/arm64/qcom/sm8550-qrd.dts b/dts/upstream/src/arm64/qcom/sm8550-qrd.dts
index 92f01501741..774bdfcffec 100644
--- a/dts/upstream/src/arm64/qcom/sm8550-qrd.dts
+++ b/dts/upstream/src/arm64/qcom/sm8550-qrd.dts
@@ -214,6 +214,68 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>, <&pmk8550_sleep_clk>;
+
+		wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		/*
+		 * TODO Add bt-enable-gpios once the Bluetooth driver is
+		 * converted to using the power sequencer.
+		 */
+
+		vdd-supply = <&vreg_s5g_0p85>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_s2g_0p85>;
+		vdddig-supply = <&vreg_s4e_0p95>;
+		vddrfa1p2-supply = <&vreg_s4g_1p25>;
+		vddrfa1p8-supply = <&vreg_s6g_1p86>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -720,17 +782,6 @@
 	status = "okay";
 };
 
-&gcc {
-	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
-		 <&pcie0_phy>,
-		 <&pcie1_phy>,
-		 <0>,
-		 <&ufs_mem_phy 0>,
-		 <&ufs_mem_phy 1>,
-		 <&ufs_mem_phy 2>,
-		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
-};
-
 &gpi_dma1 {
 	status = "okay";
 };
@@ -807,11 +858,6 @@
 
 &mdss_dp0_out {
 	data-lanes = <0 1>;
-	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
-};
-
-&pcie_1_phy_aux_clk {
-	status = "disabled";
 };
 
 &pcie0 {
@@ -824,6 +870,23 @@
 	status = "okay";
 };
 
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1e_0p88>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
@@ -907,8 +970,15 @@
 	status = "okay";
 };
 
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
+&pmk8550_gpios {
+	pmk8550_sleep_clk: sleep-clk-state {
+		pins = "gpio3";
+		function = "func1";
+		input-disable;
+		output-enable;
+		bias-disable;
+		power-source = <0>;
+	};
 };
 
 &qupv3_id_0 {
@@ -955,6 +1025,7 @@
 		sound-name-prefix = "SpkrLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3g_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
 	};
 
 	/* WSA8845, Speaker South */
@@ -968,6 +1039,7 @@
 		sound-name-prefix = "SpkrRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3g_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
 	};
 };
 
@@ -1084,6 +1156,13 @@
 		bias-disable;
 		output-low;
 	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
 };
 
 &uart7 {
@@ -1135,19 +1214,10 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-};
-
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l1e_0p88>;
 	vdda12-supply = <&vreg_l3e_1p2>;
@@ -1161,23 +1231,13 @@
 	vdda-phy-supply = <&vreg_l3e_1p2>;
 	vdda-pll-supply = <&vreg_l3f_0p88>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
-&usb_dp_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
-};
-
 &usb_dp_qmpphy_out {
 	remote-endpoint = <&redriver_ss_in>;
 };
 
-&usb_dp_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &xo_board {
 	clock-frequency = <76800000>;
 };
diff --git a/dts/upstream/src/arm64/qcom/sm8550-samsung-q5q.dts b/dts/upstream/src/arm64/qcom/sm8550-samsung-q5q.dts
new file mode 100644
index 00000000000..3d351e90bb3
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/sm8550-samsung-q5q.dts
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Alexandru Marc Serdeliuc <serdeliuk@yahoo.com>
+ * Copyright (c) 2024, David Wronek <david@mainlining.org>
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/delete-node/ &adspslpi_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mpss_dsm_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	model = "Samsung Galaxy Z Fold5";
+	compatible = "samsung,q5q", "qcom,sm8550";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@b8000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			width = <2176>;
+			height = <1812>;
+			stride = <(2176 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		adspslpi_mem: adspslpi@9ea00000 {
+			reg = <0x0 0x9ea00000 0x0 0x59b4000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@9c900000 {
+			reg = <0 0x9c900000 0 0x2000000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm@d4d00000 {
+			reg = <0x0 0xd4d00000 0x0 0x3300000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b400000 {
+			reg = <0x0 0x8b400000 0x0 0xfc00000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs-region@d4a80000 {
+			reg = <0x0 0xd4a80000 0x0 0x280000>;
+			no-map;
+		};
+
+		/*
+		 * The bootloader will only keep display hardware enabled
+		 * if this memory region is named exactly 'splash_region'
+		 */
+		splash_region@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			no-map;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l3c_0p91: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e_0p9: smps4 {
+			regulator-name = "vreg_s4e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p1: smps5 {
+			regulator-name = "vreg_s5e_1p1";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p91: ldo3 {
+			regulator-name = "vreg_l3f_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vreg_s1g_1p2: smps1 {
+			regulator-name = "vreg_s1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p8: smps2 {
+			regulator-name = "vreg_s2g_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p7: smps3 {
+			regulator-name = "vreg_s3g_0p7";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p3: smps4 {
+			regulator-name = "vreg_s4g_1p3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p8: smps5 {
+			regulator-name = "vreg_s5g_0p8";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p8: smps6 {
+			regulator-name = "vreg_s6g_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2g_1p2: ldo2 {
+			regulator-name = "vreg_l2g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "disabled";
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/adsp.mdt",
+			"qcom/sm8550/adsp_dtb.mdt";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/cdsp.mdt",
+			"qcom/sm8550/cdsp_dtb.mdt";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8550/modem.mdt",
+			"qcom/sm8550/modem_dtb.mdt";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <36 4>, <50 2>;
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/dts/upstream/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/dts/upstream/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts
index 85e0d3d66e1..85d487ef80a 100644
--- a/dts/upstream/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts
+++ b/dts/upstream/src/arm64/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -737,19 +737,10 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-};
-
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdd-supply = <&pm8550vs_2_l1>;
 	vdda12-supply = <&pm8550vs_2_l3>;
@@ -761,7 +752,6 @@
 &usb_dp_qmpphy {
 	vdda-phy-supply = <&pm8550vs_2_l3>;
 	vdda-pll-supply = <&pm8550ve_l3>;
-	orientation-switch;
 
 	status = "okay";
 };
@@ -770,10 +760,6 @@
 	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
-&usb_dp_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &xo_board {
 	clock-frequency = <76800000>;
 };
diff --git a/dts/upstream/src/arm64/qcom/sm8550.dtsi b/dts/upstream/src/arm64/qcom/sm8550.dtsi
index bc5aeb05ffc..4c9820adcf5 100644
--- a/dts/upstream/src/arm64/qcom/sm8550.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8550.dtsi
@@ -58,11 +58,6 @@
 			clock-mult = <1>;
 			clock-div = <2>;
 		};
-
-		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-		};
 	};
 
 	cpus {
@@ -357,8 +352,23 @@
 		reg = <0 0xa0000000 0 0>;
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
+	pmu-a510 {
+		compatible = "arm,cortex-a510-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a710 {
+		compatible = "arm,cortex-a710-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a715 {
+		compatible = "arm,cortex-a715-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-x3 {
+		compatible = "arm,cortex-x3-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
@@ -776,8 +786,8 @@
 			#power-domain-cells = <1>;
 			clocks = <&bi_tcxo_div2>, <&sleep_clk>,
 				 <&pcie0_phy>,
-				 <&pcie1_phy>,
-				 <&pcie_1_phy_aux_clk>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+				 <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
 				 <&ufs_mem_phy 0>,
 				 <&ufs_mem_phy 1>,
 				 <&ufs_mem_phy 2>,
@@ -1774,7 +1784,7 @@
 
 			status = "disabled";
 
-			pcie@0 {
+			pcieport0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
@@ -1928,7 +1938,7 @@
 
 			power-domains = <&gcc PCIE_1_PHY_GDSC>;
 
-			#clock-cells = <0>;
+			#clock-cells = <1>;
 			clock-output-names = "pcie1_pipe_clk";
 
 			#phy-cells = <0>;
@@ -2910,6 +2920,7 @@
 					port@1 {
 						reg = <1>;
 						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 						};
 					};
 				};
@@ -3169,6 +3180,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			status = "disabled";
 
 			ports {
@@ -3186,6 +3199,7 @@
 					reg = <1>;
 
 					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -3193,6 +3207,7 @@
 					reg = <2>;
 
 					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
 					};
 				};
 			};
@@ -3264,6 +3279,7 @@
 				snps,has-lpm-erratum;
 				tx-fifo-resize;
 				dma-coherent;
+				usb-role-switch;
 
 				ports {
 					#address-cells = <1>;
@@ -3280,6 +3296,7 @@
 						reg = <1>;
 
 						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 						};
 					};
 				};
@@ -4295,12 +4312,14 @@
 			      <0 0x25200000 0 0x200000>,
 			      <0 0x25400000 0 0x200000>,
 			      <0 0x25600000 0 0x200000>,
-			      <0 0x25800000 0 0x200000>;
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>;
 			reg-names = "llcc0_base",
 				    "llcc1_base",
 				    "llcc2_base",
 				    "llcc3_base",
-				    "llcc_broadcast_base";
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -4571,8 +4590,6 @@
 
 	thermal-zones {
 		aoss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -4591,8 +4608,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -4611,8 +4626,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -4631,8 +4644,6 @@
 		};
 
 		cpuss2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -4651,8 +4662,6 @@
 		};
 
 		cpuss3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -4671,8 +4680,6 @@
 		};
 
 		cpu3-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -4697,8 +4704,6 @@
 		};
 
 		cpu3-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -4723,8 +4728,6 @@
 		};
 
 		cpu4-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -4749,8 +4752,6 @@
 		};
 
 		cpu4-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -4775,8 +4776,6 @@
 		};
 
 		cpu5-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -4801,8 +4800,6 @@
 		};
 
 		cpu5-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -4827,8 +4824,6 @@
 		};
 
 		cpu6-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -4853,8 +4848,6 @@
 		};
 
 		cpu6-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -4879,8 +4872,6 @@
 		};
 
 		cpu7-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
@@ -4905,8 +4896,6 @@
 		};
 
 		cpu7-middle-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 14>;
 
 			trips {
@@ -4931,8 +4920,6 @@
 		};
 
 		cpu7-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 15>;
 
 			trips {
@@ -4957,8 +4944,6 @@
 		};
 
 		aoss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
@@ -4977,8 +4962,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
@@ -5003,8 +4986,6 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
@@ -5029,8 +5010,6 @@
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -5056,7 +5035,7 @@
 
 		cdsp0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 4>;
 
 			trips {
@@ -5088,7 +5067,7 @@
 
 		cdsp1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 5>;
 
 			trips {
@@ -5120,7 +5099,7 @@
 
 		cdsp2-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
@@ -5152,7 +5131,7 @@
 
 		cdsp3-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
@@ -5183,8 +5162,6 @@
 		};
 
 		video-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 8>;
 
 			trips {
@@ -5204,7 +5181,7 @@
 
 		mem-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 9>;
 
 			trips {
@@ -5229,8 +5206,6 @@
 		};
 
 		modem0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 10>;
 
 			trips {
@@ -5261,8 +5236,6 @@
 		};
 
 		modem1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 11>;
 
 			trips {
@@ -5293,8 +5266,6 @@
 		};
 
 		modem2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 12>;
 
 			trips {
@@ -5325,8 +5296,6 @@
 		};
 
 		modem3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 13>;
 
 			trips {
@@ -5357,8 +5326,6 @@
 		};
 
 		camera0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 14>;
 
 			trips {
@@ -5377,8 +5344,6 @@
 		};
 
 		camera1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 15>;
 
 			trips {
@@ -5397,8 +5362,6 @@
 		};
 
 		aoss2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens2 0>;
 
 			trips {
@@ -5418,312 +5381,264 @@
 
 		gpuss-0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 1>;
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu0_junction_config>;
+					trip = <&gpu0_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu0_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu0_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 2>;
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu1_junction_config>;
+					trip = <&gpu1_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu1_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
-				};
-
-				gpu1_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-2-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 3>;
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu2_junction_config>;
+					trip = <&gpu2_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu2_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
-				};
-
-				gpu2_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-3-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 4>;
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu3_junction_config>;
+					trip = <&gpu3_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu3_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu3_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-4-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 5>;
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu4_junction_config>;
+					trip = <&gpu4_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu4_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu4_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-5-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 6>;
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu5_junction_config>;
+					trip = <&gpu5_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu5_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
-				};
-
-				gpu5_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-6-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 7>;
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu6_junction_config>;
+					trip = <&gpu6_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu6_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
-				};
-
-				gpu6_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
 
 		gpuss-7-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 8>;
 
 			cooling-maps {
 				map0 {
-					trip = <&gpu7_junction_config>;
+					trip = <&gpu7_alert0>;
 					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu7_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				reset-mon-config {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
-				};
-
-				gpu7_junction_config: junction-config {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
diff --git a/dts/upstream/src/arm64/qcom/sm8650-hdk-display-card.dtso b/dts/upstream/src/arm64/qcom/sm8650-hdk-display-card.dtso
new file mode 100644
index 00000000000..cb102535838
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/sm8650-hdk-display-card.dtso
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/*
+ * Display Card kit overlay
+ * This requires S5702 Switch 7 to be turned to OFF to route DSI0 to the display panel
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+/* Disable HDMI bridge related nodes (mutually exclusive with the display card) */
+
+&i2c6 {
+	status = "disabled";
+};
+
+&lt9611_1v2 {
+	status = "disabled";
+};
+
+&lt9611_3v3 {
+	status = "disabled";
+};
+
+&vreg_bob_3v3 {
+	status = "disabled";
+};
+
+&lt9611_codec {
+	status = "disabled";
+};
+
+&mdss_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			mdss_dsi0_out: endpoint {
+				remote-endpoint = <&panel0_in>;
+			};
+		};
+	};
+};
+
+&spi4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	touchscreen@0 {
+		compatible = "goodix,gt9916";
+		reg = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14b_3p2>;
+
+		spi-max-frequency = <1000000>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2400>;
+
+		pinctrl-0 = <&ts_irq>, <&ts_reset>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync: mdp-vsync-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_irq: ts-irq-state {
+		pins = "gpio161";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-disable;
+	};
+
+	ts_reset: ts-reset-state {
+		pins = "gpio162";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/dts/upstream/src/arm64/qcom/sm8650-hdk.dts b/dts/upstream/src/arm64/qcom/sm8650-hdk.dts
new file mode 100644
index 00000000000..591e6ab9bf5
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/sm8650-hdk.dts
@@ -0,0 +1,1355 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 HDK";
+	compatible = "qcom,sm8650-hdk", "qcom,sm8650";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart15;
+		serial1 = &uart14;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_out: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8550b_gpios 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&pm8550b_gpios 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&wcd_usbss_sbu_mux>;
+				    };
+				};
+			};
+		};
+	};
+
+	lt9611_1v2: regulator-lt9611-1v2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "LT9611_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		vin-supply = <&vph_pwr>;
+		gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
+
+		enable-active-high;
+	};
+
+	lt9611_3v3: regulator-lt9611-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "LT9611_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vreg_bob_3v3>;
+		gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
+
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8650-HDK";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
+				"AMIC2", "MIC BIAS2",
+				"AMIC5", "MIC BIAS4",
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT3", "ADC4_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_bob_3v3: regulator-vreg-bob-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_BOB_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	wcd939x: audio-codec {
+		compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>;
+
+		wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+		/*
+		 * TODO Add bt-enable-gpios once the Bluetooth driver is
+		 * converted to using the power sequencer.
+		 */
+
+		vdd-supply = <&vreg_s4i_0p85>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddio1p2-supply = <&vreg_l3c_1p2>;
+		vddaon-supply = <&vreg_s2c_0p8>;
+		vdddig-supply = <&vreg_s3c_0p9>;
+		vddrfa1p2-supply = <&vreg_s1c_1p2>;
+		vddrfa1p8-supply = <&vreg_s6c_1p8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6c_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p1: ldo1 {
+			regulator-name = "vreg_l1m_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_2p8: ldo6 {
+			regulator-name = "vreg_l6m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p96: ldo7 {
+			regulator-name = "vreg_l7m_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_s6c_1p8>;
+		vdd-l5-supply = <&vreg_bob2>;
+		vdd-l6-supply = <&vreg_bob2>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p056: ldo2 {
+			regulator-name = "vreg_l2n_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_1p8: ldo3 {
+			regulator-name = "vreg_l3n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_1p8: ldo4 {
+			regulator-name = "vreg_l4n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_2p8: ldo5 {
+			regulator-name = "vreg_l5n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_2p8: ldo6 {
+			regulator-name = "vreg_l6n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_3p3: ldo7 {
+			regulator-name = "vreg_l7n_3p3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c3 {
+       status = "okay";
+
+       wcd_usbss: typec-mux@e {
+		compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss";
+		reg = <0xe>;
+
+		vdd-supply = <&vreg_l15b_1p8>;
+		reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>;
+
+		mode-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				wcd_usbss_sbu_mux: endpoint {
+					remote-endpoint = <&pmic_glink_sbu>;
+				};
+			};
+		};
+       };
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin>, <&lt9611_rst_pin>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_connector_out>;
+				};
+			};
+		};
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8650/ipa_fws.mbn";
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8650/gen70900_zap.mbn";
+	};
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3e_0p9>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+	vdda-qref-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		output-disable;
+		power-source = <1>; /* 1.8 V */
+	};
+
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+/* The RGB signals are routed to 3 separate LEDs on the HDK8650 */
+&pm8550_pwm {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	led@1 {
+		reg = <1>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_RED>;
+		default-state = "off";
+	};
+
+	led@2 {
+		reg = <2>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_GREEN>;
+		default-state = "off";
+	};
+
+	led@3 {
+		reg = <3>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_BLUE>;
+		default-state = "off";
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pmk8550_rtc {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qup_i2c3_data_clk {
+	/* Use internal I2C pull-up */
+	bias-pull-up = <2200>;
+};
+
+&qupv3_id_0 {
+	iommus = <&apps_smmu 0xa3 0x3>;
+
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker North */
+	north_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Speaker South */
+	south_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9395 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010e00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5 9>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9395 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010e00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio85";
+		function = "gpio";
+		bias-disable;
+	};
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio28";
+		function = "gpio";
+		output-high;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddio-supply = <&vreg_l3c_1p2>;
+		vddaon-supply = <&vreg_l15b_1p8>;
+		vdddig-supply = <&vreg_s3c_0p9>;
+		vddrfa0p8-supply = <&vreg_s3c_0p9>;
+		vddrfa1p2-supply = <&vreg_s1c_1p2>;
+		vddrfa1p9-supply = <&vreg_s6c_1p8>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
+ * USB SS -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/dts/upstream/src/arm64/qcom/sm8650-mtp.dts b/dts/upstream/src/arm64/qcom/sm8650-mtp.dts
index d04ceaa73c2..c63822f5b12 100644
--- a/dts/upstream/src/arm64/qcom/sm8650-mtp.dts
+++ b/dts/upstream/src/arm64/qcom/sm8650-mtp.dts
@@ -59,7 +59,7 @@
 					reg = <1>;
 
 					pmic_glink_ss_in: endpoint {
-						remote-endpoint = <&usb_1_dwc3_ss>;
+						remote-endpoint = <&usb_dp_qmpphy_out>;
 					};
 				};
 			};
@@ -641,10 +641,6 @@
 	status = "okay";
 };
 
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -755,6 +751,16 @@
 		sound-name-prefix = "SpkrLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <1 2 3 7 10 13>;
 	};
 
 	/* WSA8845, Speaker Right */
@@ -768,6 +774,16 @@
 		sound-name-prefix = "SpkrRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <4 5 6 7 11 13>;
 	};
 };
 
@@ -853,10 +869,6 @@
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&pmic_glink_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l1i_0p88>;
 	vdda12-supply = <&vreg_l3i_1p2>;
@@ -873,6 +885,10 @@
 	status = "okay";
 };
 
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
 &xo_board {
 	clock-frequency = <76800000>;
 };
diff --git a/dts/upstream/src/arm64/qcom/sm8650-qrd.dts b/dts/upstream/src/arm64/qcom/sm8650-qrd.dts
index 4e94f7fe4d2..b0d7927b708 100644
--- a/dts/upstream/src/arm64/qcom/sm8650-qrd.dts
+++ b/dts/upstream/src/arm64/qcom/sm8650-qrd.dts
@@ -203,6 +203,71 @@
 			};
 		};
 	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>;
+
+		wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+		/*
+		 * TODO Add bt-enable-gpios once the Bluetooth driver is
+		 * converted to using the power sequencer.
+		 */
+
+		vdd-supply = <&vreg_s4i_0p85>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddio1p2-supply = <&vreg_l3c_1p2>;
+		vddaon-supply = <&vreg_s2c_0p8>;
+		vdddig-supply = <&vreg_s3c_0p9>;
+		vddrfa1p2-supply = <&vreg_s1c_1p2>;
+		vddrfa1p8-supply = <&vreg_s6c_1p8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -832,11 +897,6 @@
 
 &mdss_dp0_out {
 	data-lanes = <0 1>;
-	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
-};
-
-&pcie_1_phy_aux_clk {
-	clock-frequency = <1000>;
 };
 
 &pcie0 {
@@ -849,6 +909,23 @@
 	status = "okay";
 };
 
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1i_0p88>;
 	vdda-pll-supply = <&vreg_l3i_1p2>;
@@ -1012,6 +1089,16 @@
 		sound-name-prefix = "SpkrLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <1 2 3 7 10 13>;
 	};
 
 	/* WSA8845, Speaker Right */
@@ -1025,6 +1112,16 @@
 		sound-name-prefix = "SpkrRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l3c_1p2>;
+
+		/*
+		 * WSA8845 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8845 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8845 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8845 Port 4 (PBR)     <=> SWR0 Port 7 (PBR)
+		 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 * WSA8845 Port 6 (CPS)     <=> SWR0 Port 13 (CPS)
+		 */
+		qcom,port-mapping = <4 5 6 7 11 13>;
 	};
 };
 
@@ -1143,6 +1240,13 @@
 		bias-disable;
 		output-low;
 	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
 };
 
 &uart14 {
@@ -1211,10 +1315,6 @@
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l1i_0p88>;
 	vdda12-supply = <&vreg_l3i_1p2>;
@@ -1228,23 +1328,13 @@
 	vdda-phy-supply = <&vreg_l3i_1p2>;
 	vdda-pll-supply = <&vreg_l3g_0p91>;
 
-	orientation-switch;
-
 	status = "okay";
 };
 
-&usb_dp_qmpphy_dp_in {
-	remote-endpoint = <&mdss_dp0_out>;
-};
-
 &usb_dp_qmpphy_out {
 	remote-endpoint = <&redriver_ss_in>;
 };
 
-&usb_dp_qmpphy_usb_ss_in {
-	remote-endpoint = <&usb_1_dwc3_ss>;
-};
-
 &xo_board {
 	clock-frequency = <76800000>;
 };
diff --git a/dts/upstream/src/arm64/qcom/sm8650.dtsi b/dts/upstream/src/arm64/qcom/sm8650.dtsi
index 62a6e77730b..9d9bbb9aca6 100644
--- a/dts/upstream/src/arm64/qcom/sm8650.dtsi
+++ b/dts/upstream/src/arm64/qcom/sm8650.dtsi
@@ -4,10 +4,12 @@
  */
 
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8650-camcc.h>
 #include <dt-bindings/clock/qcom,sm8650-dispcc.h>
 #include <dt-bindings/clock/qcom,sm8650-gcc.h>
 #include <dt-bindings/clock/qcom,sm8650-gpucc.h>
 #include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+#include <dt-bindings/clock/qcom,sm8650-videocc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -60,11 +62,6 @@
 			clock-mult = <1>;
 			clock-div = <2>;
 		};
-
-		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-		};
 	};
 
 	cpus {
@@ -371,6 +368,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8650", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x19000>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 		};
@@ -394,8 +392,18 @@
 		reg = <0 0xa0000000 0 0>;
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
+	pmu-a520 {
+		compatible = "arm,cortex-a520-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-a720 {
+		compatible = "arm,cortex-a720-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu-x4 {
+		compatible = "arm,cortex-x4-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
@@ -758,8 +766,8 @@
 				 <&bi_tcxo_ao_div2>,
 				 <&sleep_clk>,
 				 <&pcie0_phy>,
-				 <&pcie1_phy>,
-				 <&pcie_1_phy_aux_clk>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
+				 <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
 				 <&ufs_mem_phy 0>,
 				 <&ufs_mem_phy 1>,
 				 <&ufs_mem_phy 2>,
@@ -2208,7 +2216,7 @@
 			reg = <0 0x010c3000 0 0x1000>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
 			reg = <0 0x01c00000 0 0x3000>,
@@ -2294,7 +2302,7 @@
 
 			status = "disabled";
 
-			pcie@0 {
+			pcieport0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
@@ -2336,7 +2344,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
 			reg = <0 0x01c08000 0 0x3000>,
@@ -2467,7 +2475,7 @@
 
 			power-domains = <&gcc PCIE_1_PHY_GDSC>;
 
-			#clock-cells = <0>;
+			#clock-cells = <1>;
 			clock-output-names = "pcie1_pipe_clk";
 
 			#phy-cells = <0>;
@@ -2626,6 +2634,7 @@
 			operating-points-v2 = <&gpu_opp_table>;
 
 			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -3309,6 +3318,30 @@
 			};
 		};
 
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sm8650-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_VIDEO_AHB_CLK>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,sm8650-camcc";
+			reg = <0 0x0ade0000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm8650-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -3675,6 +3708,7 @@
 						reg = <1>;
 
 						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 						};
 					};
 				};
@@ -3750,6 +3784,8 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			orientation-switch;
+
 			status = "disabled";
 
 			ports {
@@ -3767,6 +3803,7 @@
 					reg = <1>;
 
 					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
 					};
 				};
 
@@ -3774,6 +3811,7 @@
 					reg = <2>;
 
 					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
 					};
 				};
 			};
@@ -3864,6 +3902,7 @@
 						reg = <1>;
 
 						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 						};
 					};
 				};
@@ -4982,12 +5021,14 @@
 			      <0 0x25400000 0 0x200000>,
 			      <0 0x25200000 0 0x200000>,
 			      <0 0x25600000 0 0x200000>,
-			      <0 0x25800000 0 0x200000>;
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>;
 			reg-names = "llcc0_base",
 				    "llcc1_base",
 				    "llcc2_base",
 				    "llcc3_base",
-				    "llcc_broadcast_base";
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
 
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -5328,8 +5369,6 @@
 
 	thermal-zones {
 		aoss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 0>;
 
 			trips {
@@ -5348,8 +5387,6 @@
 		};
 
 		cpuss0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 1>;
 
 			trips {
@@ -5368,8 +5405,6 @@
 		};
 
 		cpuss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 2>;
 
 			trips {
@@ -5388,8 +5423,6 @@
 		};
 
 		cpuss2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
@@ -5408,8 +5441,6 @@
 		};
 
 		cpuss3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 4>;
 
 			trips {
@@ -5428,8 +5459,6 @@
 		};
 
 		cpu2-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
@@ -5454,8 +5483,6 @@
 		};
 
 		cpu2-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 6>;
 
 			trips {
@@ -5480,8 +5507,6 @@
 		};
 
 		cpu3-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 7>;
 
 			trips {
@@ -5506,8 +5531,6 @@
 		};
 
 		cpu3-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
@@ -5532,8 +5555,6 @@
 		};
 
 		cpu4-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 9>;
 
 			trips {
@@ -5558,8 +5579,6 @@
 		};
 
 		cpu4-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
@@ -5584,8 +5603,6 @@
 		};
 
 		cpu5-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 11>;
 
 			trips {
@@ -5610,8 +5627,6 @@
 		};
 
 		cpu5-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 12>;
 
 			trips {
@@ -5636,8 +5651,6 @@
 		};
 
 		cpu6-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 13>;
 
 			trips {
@@ -5662,8 +5675,6 @@
 		};
 
 		cpu6-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens0 14>;
 
 			trips {
@@ -5688,8 +5699,6 @@
 		};
 
 		aoss1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 0>;
 
 			trips {
@@ -5708,8 +5717,6 @@
 		};
 
 		cpu7-top-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 1>;
 
 			trips {
@@ -5734,8 +5741,6 @@
 		};
 
 		cpu7-middle-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 2>;
 
 			trips {
@@ -5760,8 +5765,6 @@
 		};
 
 		cpu7-bottom-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 3>;
 
 			trips {
@@ -5786,8 +5789,6 @@
 		};
 
 		cpu0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 4>;
 
 			trips {
@@ -5812,8 +5813,6 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 5>;
 
 			trips {
@@ -5839,7 +5838,7 @@
 
 		nsphvx0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 6>;
 
 			trips {
@@ -5859,7 +5858,7 @@
 
 		nsphvx1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 7>;
 
 			trips {
@@ -5879,7 +5878,7 @@
 
 		nsphmx0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 8>;
 
 			trips {
@@ -5899,7 +5898,7 @@
 
 		nsphmx1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 9>;
 
 			trips {
@@ -5919,7 +5918,7 @@
 
 		nsphmx2-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 10>;
 
 			trips {
@@ -5939,7 +5938,7 @@
 
 		nsphmx3-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 11>;
 
 			trips {
@@ -5959,7 +5958,7 @@
 
 		video-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 12>;
 
 			trips {
@@ -5979,7 +5978,7 @@
 
 		ddr-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens1 13>;
 
 			trips {
@@ -5998,8 +5997,6 @@
 		};
 
 		camera0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 14>;
 
 			trips {
@@ -6018,8 +6015,6 @@
 		};
 
 		camera1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens1 15>;
 
 			trips {
@@ -6038,8 +6033,6 @@
 		};
 
 		aoss2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens2 0>;
 
 			trips {
@@ -6059,19 +6052,32 @@
 
 		gpuss0-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 1>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu0_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
-				gpuss0-critical {
+				trip-point2 {
 					temperature = <110000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6079,19 +6085,32 @@
 
 		gpuss1-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 2>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu1_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
-				gpuss1-critical {
+				trip-point2 {
 					temperature = <110000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6099,19 +6118,32 @@
 
 		gpuss2-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 3>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu2_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
-				gpuss2-critical {
+				trip-point2 {
 					temperature = <110000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6119,19 +6151,32 @@
 
 		gpuss3-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 4>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu3_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu3_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
-				gpuss3-critical {
+				trip-point2 {
 					temperature = <110000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6139,19 +6184,32 @@
 
 		gpuss4-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 5>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu4_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu4_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
-				gpuss4-critical {
+				trip-point2 {
 					temperature = <110000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6159,19 +6217,32 @@
 
 		gpuss5-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 6>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu5_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu5_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
-				gpuss5-critical {
+				trip-point2 {
 					temperature = <110000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6179,19 +6250,32 @@
 
 		gpuss6-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 7>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu6_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu6_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
-				gpuss6-critical {
+				trip-point2 {
 					temperature = <110000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
@@ -6199,27 +6283,38 @@
 
 		gpuss7-thermal {
 			polling-delay-passive = <10>;
-			polling-delay = <0>;
+
 			thermal-sensors = <&tsens2 8>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu7_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu7_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
 					temperature = <90000>;
-					hysteresis = <2000>;
+					hysteresis = <1000>;
 					type = "hot";
 				};
 
-				gpuss7-critical {
+				trip-point2 {
 					temperature = <110000>;
-					hysteresis = <0>;
+					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
 		};
 
 		modem0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens2 9>;
 
 			trips {
@@ -6238,8 +6333,6 @@
 		};
 
 		modem1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens2 10>;
 
 			trips {
@@ -6258,8 +6351,6 @@
 		};
 
 		modem2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens2 11>;
 
 			trips {
@@ -6278,8 +6369,6 @@
 		};
 
 		modem3-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&tsens2 12>;
 
 			trips {
diff --git a/dts/upstream/src/arm64/qcom/x1e80100-asus-vivobook-s15.dts b/dts/upstream/src/arm64/qcom/x1e80100-asus-vivobook-s15.dts
new file mode 100644
index 00000000000..9caa14dda58
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/x1e80100-asus-vivobook-s15.dts
@@ -0,0 +1,652 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "ASUS Vivobook S 15";
+	compatible = "asus,vivobook-s15", "qcom,x1e80100";
+	chassis-type = "laptop";
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Left-side port, closer to the screen */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side port, farther from the screen */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PS8830 USB4 Retimer? @ 0x8 */
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PS8830 USB4 Retimer? @ 0x8 */
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	/* EC? @ 0x5b, 0x76 */
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PS8830 USB4 Retimer? @ 0x8 */
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp3 {
+	compatible = "qcom,x1e80100-dp";
+	/delete-property/ #sound-dai-cells;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "disabled";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
diff --git a/dts/upstream/src/arm64/qcom/x1e80100-crd.dts b/dts/upstream/src/arm64/qcom/x1e80100-crd.dts
index be6b1e7d07c..e17ab8251e2 100644
--- a/dts/upstream/src/arm64/qcom/x1e80100-crd.dts
+++ b/dts/upstream/src/arm64/qcom/x1e80100-crd.dts
@@ -49,6 +49,104 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		/* Left-side rear port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side front port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		/* Right-side port */
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		linux,cma {
 			compatible = "shared-dma-pool";
@@ -170,9 +268,22 @@
 		pinctrl-0 = <&edp_reg_en>;
 		pinctrl-names = "default";
 
-		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+	};
 };
 
 &apps_rsc {
@@ -525,6 +636,14 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
+	};
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 
@@ -612,9 +731,13 @@
 
 	aux-bus {
 		panel {
-			compatible = "edp-panel";
+			compatible = "samsung,atna45af01", "samsung,atna33xc20";
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
 			power-supply = <&vreg_edp_3p3>;
 
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
 			port {
 				edp_panel_in: endpoint {
 					remote-endpoint = <&mdss_dp3_out>;
@@ -644,27 +767,51 @@
 };
 
 &pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-phy-supply = <&vreg_l3i_0p8>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
 
 	status = "okay";
 };
 
 &pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
 	status = "okay";
 };
 
 &pcie6a_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-phy-supply = <&vreg_l1d_0p8>;
 	vdda-pll-supply = <&vreg_l2j_1p2>;
 
 	status = "okay";
 };
 
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		input-disable;
+		output-enable;
+	};
+};
+
 &qupv3_0 {
 	status = "okay";
 };
@@ -804,6 +951,59 @@
 		bias-disable;
 	};
 
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	tpad_default: tpad-default-state {
 		pins = "gpio3";
 		function = "gpio";
@@ -840,8 +1040,8 @@
 };
 
 &usb_1_ss0_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_0_eusb2_repeater>;
 
@@ -849,6 +1049,9 @@
 };
 
 &usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
 	status = "okay";
 };
 
@@ -858,12 +1061,19 @@
 
 &usb_1_ss0_dwc3 {
 	dr_mode = "host";
-	usb-role-switch;
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
 };
 
 &usb_1_ss1_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_1_eusb2_repeater>;
 
@@ -871,6 +1081,9 @@
 };
 
 &usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
 	status = "okay";
 };
 
@@ -880,12 +1093,19 @@
 
 &usb_1_ss1_dwc3 {
 	dr_mode = "host";
-	usb-role-switch;
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
 };
 
 &usb_1_ss2_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_2_eusb2_repeater>;
 
@@ -893,6 +1113,9 @@
 };
 
 &usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
 	status = "okay";
 };
 
@@ -902,5 +1125,12 @@
 
 &usb_1_ss2_dwc3 {
 	dr_mode = "host";
-	usb-role-switch;
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss2_ss_in>;
 };
diff --git a/dts/upstream/src/arm64/qcom/x1e80100-lenovo-yoga-slim7x.dts b/dts/upstream/src/arm64/qcom/x1e80100-lenovo-yoga-slim7x.dts
new file mode 100644
index 00000000000..1943bdbfb8c
--- /dev/null
+++ b/dts/upstream/src/arm64/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -0,0 +1,967 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	model = "Lenovo Yoga Slim 7x";
+	compatible = "lenovo,yoga-slim7x", "qcom,x1e80100";
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		/* Left-side rear port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side front port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		/* Right-side port */
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-LENOVO-Yoga-Slim7x";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT";
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "hid-over-i2c";
+		reg = <0x14>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp3 {
+	compatible = "qcom,x1e80100-dp";
+	/delete-property/ #sound-dai-cells;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		qcom,ath12k-calibration-variant = "LES790";
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/LENOVO/83ED/qcadsp8380.mbn",
+			"qcom/x1e80100/LENOVO/83ED/adsp_dtbs.elf";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/LENOVO/83ED/qccdsp8380.mbn",
+			"qcom/x1e80100/LENOVO/83ED/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss2_ss_in>;
+};
diff --git a/dts/upstream/src/arm64/qcom/x1e80100-pmics.dtsi b/dts/upstream/src/arm64/qcom/x1e80100-pmics.dtsi
index 04301f772fb..e34e70922cd 100644
--- a/dts/upstream/src/arm64/qcom/x1e80100-pmics.dtsi
+++ b/dts/upstream/src/arm64/qcom/x1e80100-pmics.dtsi
@@ -3,10 +3,477 @@
  * Copyright (c) 2024, Linaro Limited
  */
 
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
 / {
+	thermal-zones {
+		pm8550-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-2-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_2_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmc8380-3-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8380_3_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmc8380-4-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8380_4_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmc8380-5-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8380_5_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmc8380-6-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmc8380_6_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-8-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_8_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550ve-9-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8550ve_9_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8010-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pm8010_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus0 {
+	/* PMK8380 */
+	pmk8550: pmic@0 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmk8550_pon: pon@1300 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				status = "disabled";
+			};
+		};
+
+		pmk8550_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			/* Not yet sure what blocks access */
+			status = "reserved";
+		};
+
+		pmk8550_sdam_2: nvram@7100 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7100 0x100>;
+
+			reboot_reason: reboot-reason@48 {
+				reg = <0x48 0x1>;
+				bits = <1 7>;
+			};
+		};
+
+		pmk8550_gpios: gpio@8800 {
+			compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
+			reg = <0xb800>;
+			gpio-controller;
+			gpio-ranges = <&pmk8550_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	/* PMC8380C */
+	pm8550: pmic@1 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550_gpios: gpio@8800 {
+			compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8550_flash: led-controller@ee00 {
+			compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led";
+			reg = <0xee00>;
+			status = "disabled";
+		};
+
+		pm8550_pwm: pwm {
+			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+
+	/* PMC8380VE */
+	pm8550ve_2: pmic@2 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_2_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_2_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_2_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	/* PMC8380 is actually not a PM8550 series rebrand */
+	pmc8380_3: pmic@3 {
+		compatible = "qcom,pmc8380", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmc8380_3_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8380_3_gpios: gpio@8800 {
+			compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8380_3_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmc8380_4: pmic@4 {
+		compatible = "qcom,pmc8380", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmc8380_4_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8380_4_gpios: gpio@8800 {
+			compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8380_4_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmc8380_5: pmic@5 {
+		compatible = "qcom,pmc8380", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmc8380_5_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8380_5_gpios: gpio@8800 {
+			compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8380_5_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmc8380_6: pmic@6 {
+		compatible = "qcom,pmc8380", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmc8380_6_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8380_6_gpios: gpio@8800 {
+			compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8380_6_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	/* PMC8380VE */
+	pm8550ve_8: pmic@8 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_8_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_8_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_8_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	/* PMC8380VE */
+	pm8550ve_9: pmic@9 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x9 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_9_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_9_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_9_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8010: pmic@c {
+		compatible = "qcom,pm8010", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8010_temp_alarm: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
 };
 
 &spmi_bus1 {
@@ -48,4 +515,19 @@
 			#phy-cells = <0>;
 		};
 	};
+
+	smb2360_3: pmic@c {
+		compatible = "qcom,smb2360", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+
+		smb2360_3_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,smb2360-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
 };
diff --git a/dts/upstream/src/arm64/qcom/x1e80100-qcp.dts b/dts/upstream/src/arm64/qcom/x1e80100-qcp.dts
index 8f67c393b87..8098e6730ae 100644
--- a/dts/upstream/src/arm64/qcom/x1e80100-qcp.dts
+++ b/dts/upstream/src/arm64/qcom/x1e80100-qcp.dts
@@ -19,10 +19,131 @@
 		serial0 = &uart21;
 	};
 
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		linux,cma {
 			compatible = "shared-dma-pool";
@@ -32,6 +153,66 @@
 		};
 	};
 
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-QCP";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>,
+					    <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
@@ -59,6 +240,20 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+	};
 };
 
 &apps_rsc {
@@ -411,6 +606,24 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -455,22 +668,36 @@
 };
 
 &pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
 &pcie4_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-phy-supply = <&vreg_l3i_0p8>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
 
 	status = "okay";
 };
 
 &pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie6a_default>;
+
 	status = "okay";
 };
 
 &pcie6a_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-phy-supply = <&vreg_l1d_0p8>;
 	vdda-pll-supply = <&vreg_l2j_1p2>;
 
 	status = "okay";
@@ -502,6 +729,10 @@
 	status = "okay";
 };
 
+&smb2360_3 {
+	status = "okay";
+};
+
 &smb2360_0_eusb2_repeater {
 	vdd18-supply = <&vreg_l3d_1p8>;
 	vdd3-supply = <&vreg_l2b_3p0>;
@@ -517,6 +748,57 @@
 	vdd3-supply = <&vreg_l8b_3p0>;
 };
 
+&swr0 {
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		#sound-dai-cells = <0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		#sound-dai-cells = <0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <33 3>, /* Unused */
 			       <44 4>, /* SPI (TPM) */
@@ -528,6 +810,67 @@
 		drive-strength = <16>;
 		bias-disable;
 	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &uart21 {
@@ -536,8 +879,8 @@
 };
 
 &usb_1_ss0_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_0_eusb2_repeater>;
 
@@ -545,6 +888,9 @@
 };
 
 &usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
 	status = "okay";
 };
 
@@ -554,12 +900,19 @@
 
 &usb_1_ss0_dwc3 {
 	dr_mode = "host";
-	usb-role-switch;
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
 };
 
 &usb_1_ss1_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_1_eusb2_repeater>;
 
@@ -567,6 +920,9 @@
 };
 
 &usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
 	status = "okay";
 };
 
@@ -576,12 +932,19 @@
 
 &usb_1_ss1_dwc3 {
 	dr_mode = "host";
-	usb-role-switch;
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
 };
 
 &usb_1_ss2_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_2_eusb2_repeater>;
 
@@ -589,6 +952,9 @@
 };
 
 &usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
 	status = "okay";
 };
 
@@ -598,5 +964,12 @@
 
 &usb_1_ss2_dwc3 {
 	dr_mode = "host";
-	usb-role-switch;
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss2_ss_in>;
 };
diff --git a/dts/upstream/src/arm64/qcom/x1e80100.dtsi b/dts/upstream/src/arm64/qcom/x1e80100.dtsi
index 05e4d491ec1..cd732ef88cd 100644
--- a/dts/upstream/src/arm64/qcom/x1e80100.dtsi
+++ b/dts/upstream/src/arm64/qcom/x1e80100.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
 #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/clock/qcom,x1e80100-gpucc.h>
 #include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
@@ -2505,6 +2506,66 @@
 			};
 		};
 
+		tsens0: thermal-sensor@c271000 {
+			compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c271000 0 0x1000>,
+			      <0 0x0c222000 0 0x1000>;
+
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c272000 {
+			compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c272000 0 0x1000>,
+			      <0 0x0c223000 0 0x1000>;
+
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c273000 {
+			compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c273000 0 0x1000>,
+			      <0 0x0c224000 0 0x1000>;
+
+			interrupts-extended = <&pdc 28 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c274000 {
+			compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c274000 0 0x1000>,
+			      <0 0x0c225000 0 0x1000>;
+
+			interrupts-extended = <&pdc 29 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
 		usb_1_ss0_hsphy: phy@fd3000 {
 			compatible = "qcom,x1e80100-snps-eusb2-phy",
 				     "qcom,sm8550-snps-eusb2-phy";
@@ -2543,6 +2604,34 @@
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_ss0_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_ss0_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_ss0_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
+					};
+				};
+			};
 		};
 
 		usb_1_ss1_hsphy: phy@fd9000 {
@@ -2583,6 +2672,34 @@
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_ss1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_ss1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_ss1_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp1_out>;
+					};
+				};
+			};
 		};
 
 		usb_1_ss2_hsphy: phy@fde000 {
@@ -2623,6 +2740,34 @@
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_ss2_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_ss2_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_ss2_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp2_out>;
+					};
+				};
+			};
 		};
 
 		cnoc_main: interconnect@1500000 {
@@ -2756,7 +2901,7 @@
 
 			dma-coherent;
 
-			linux,pci-domain = <7>;
+			linux,pci-domain = <6>;
 			num-lanes = <2>;
 
 			interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
@@ -2814,6 +2959,7 @@
 				      "link_down";
 
 			power-domains = <&gcc GCC_PCIE_6A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie6a_phy>;
 			phy-names = "pciephy";
@@ -2877,7 +3023,7 @@
 
 			dma-coherent;
 
-			linux,pci-domain = <5>;
+			linux,pci-domain = <4>;
 			num-lanes = <2>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
@@ -2935,11 +3081,22 @@
 				      "link_down";
 
 			power-domains = <&gcc GCC_PCIE_4_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie4_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie4_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie4_phy: phy@1c0e000 {
@@ -2987,6 +3144,201 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43050c01", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
+
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_microcode_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-1100000000 {
+					opp-hz = /bits/ 64 <1100000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <16500000>;
+				};
+
+				opp-1000000000 {
+					opp-hz = /bits/ 64 <1000000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <14398438>;
+				};
+
+				opp-925000000 {
+					opp-hz = /bits/ 64 <925000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <14398438>;
+				};
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <12449219>;
+				};
+
+				opp-744000000 {
+					opp-hz = /bits/ 64 <744000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <10687500>;
+				};
+
+				opp-687000000 {
+					opp-hz = /bits/ 64 <687000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <8171875>;
+				};
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <6074219>;
+				};
+
+				opp-390000000 {
+					opp-hz = /bits/ 64 <390000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <3000000>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					opp-peak-kBps = <2136719>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-x185.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b280000 0x0 0x10000>;
+			reg-names =  "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,x1e80100-gpucc";
+			reg = <0 0x03d90000 0 0xa000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CPH_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CPH_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,x1e80100-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 660 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
 		gem_noc: interconnect@26400000 {
 			compatible = "qcom,x1e80100-gem-noc";
 			reg = <0 0x26400000 0 0x311200>;
@@ -3447,8 +3799,23 @@
 
 				dma-coherent;
 
-				port {
-					usb_1_ss2_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_ss2_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_ss2_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_ss2_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -3516,8 +3883,15 @@
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
 
-				port {
-					usb_2_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_2_dwc3_hs: endpoint {
+						};
 					};
 				};
 			};
@@ -3592,8 +3966,23 @@
 
 				dma-coherent;
 
-				port {
-					usb_1_ss0_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_ss0_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_ss0_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_ss0_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -3675,8 +4064,23 @@
 
 				dma-coherent;
 
-				port {
-					usb_1_ss1_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_ss1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_ss1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_ss1_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -3862,6 +4266,7 @@
 						reg = <1>;
 
 						mdss_dp0_out: endpoint {
+							remote-endpoint = <&usb_1_ss0_qmpphy_dp_in>;
 						};
 					};
 				};
@@ -3944,6 +4349,7 @@
 						reg = <1>;
 
 						mdss_dp1_out: endpoint {
+							remote-endpoint = <&usb_1_ss1_qmpphy_dp_in>;
 						};
 					};
 				};
@@ -4023,6 +4429,10 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss_dp2_out: endpoint {
+							remote-endpoint = <&usb_1_ss2_qmpphy_dp_in>;
+						};
 					};
 				};
 
@@ -5157,6 +5567,129 @@
 			};
 		};
 
+		pmu@24091000 {
+			compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x24091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <800000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2188000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <3072000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6220800>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <6835200>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <8371200>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <10944000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <12748800>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <14745600>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <16896000>;
+				};
+			};
+		};
+
+		/* cluster0 */
+		pmu@240b3400 {
+			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b3400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <4800000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <7464000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <9600000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <12896000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <14928000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <17064000>;
+				};
+			};
+		};
+
+		/* cluster2 */
+		pmu@240b5400 {
+			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b5400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
+		/* cluster1 */
+		pmu@240b6400 {
+			compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b6400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
 		system-cache-controller@25000000 {
 			compatible = "qcom,x1e80100-llcc";
 			reg = <0 0x25000000 0 0x200000>,
@@ -5226,6 +5759,55 @@
 				label = "lpass";
 				qcom,remote-pid = <2>;
 
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1063 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1064 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1065 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1066 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x80>,
+							 <&apps_smmu 0x1067 0x0>;
+						dma-coherent;
+					};
+				};
+
 				gpr {
 					compatible = "qcom,gpr";
 					qcom,glink-channels = "adsp_apps";
@@ -5315,6 +5897,101 @@
 
 				label = "cdsp";
 				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0c01 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0c02 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0c03 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x0c04 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x0c05 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x0c06 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x0c07 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x0c08 0x20>;
+						dma-coherent;
+					};
+
+					/* note: compute-cb@9 is secure */
+
+					compute-cb@10 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <10>;
+						iommus = <&apps_smmu 0x0c0c 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x0c0d 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x0c0e 0x20>;
+						dma-coherent;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x0c0f 0x20>;
+						dma-coherent;
+					};
+				};
 			};
 		};
 	};
@@ -5327,4 +6004,1158 @@
 			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
+
+	thermal-zones {
+		aoss0-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-0-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-0-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-1-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-1-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-2-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-2-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-3-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-3-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-top-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-btm-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mem-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-0-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-0-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-1-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-1-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-2-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-2-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-3-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-3-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-top-thermal {
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-btm-thermal {
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-0-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-0-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-1-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-1-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-2-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-2-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-3-top-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-3-btm-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss2-top-thermal {
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss2-btm-thermal {
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss3-thermal {
+			thermal-sensors = <&tsens3 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsp0-thermal {
+			thermal-sensors = <&tsens3 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsp0-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsp1-thermal {
+			thermal-sensors = <&tsens3 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsp1-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsp2-thermal {
+			thermal-sensors = <&tsens3 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsp2-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsp3-thermal {
+			thermal-sensors = <&tsens3 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsp3-critical {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-4-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-5-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-6-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss-7-thermal {
+			polling-delay-passive = <10>;
+
+			thermal-sensors = <&tsens3 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				trip-point2 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			thermal-sensors = <&tsens3 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera1-thermal {
+			thermal-sensors = <&tsens3 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera0-critical {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/dts/upstream/src/arm64/renesas/condor-common.dtsi b/dts/upstream/src/arm64/renesas/condor-common.dtsi
index 7c34d14dcd7..8b7c0c34ead 100644
--- a/dts/upstream/src/arm64/renesas/condor-common.dtsi
+++ b/dts/upstream/src/arm64/renesas/condor-common.dtsi
@@ -227,6 +227,12 @@
 			};
 		};
 	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
 };
 
 &i2c1 {
diff --git a/dts/upstream/src/arm64/renesas/r8a774a1.dtsi b/dts/upstream/src/arm64/renesas/r8a774a1.dtsi
index a8a44fe5e83..1dbf9d56c68 100644
--- a/dts/upstream/src/arm64/renesas/r8a774a1.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a774a1.dtsi
@@ -2853,6 +2853,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clocks - can be overridden by the board */
diff --git a/dts/upstream/src/arm64/renesas/r8a774b1.dtsi b/dts/upstream/src/arm64/renesas/r8a774b1.dtsi
index 4fff511e994..10f22c52e79 100644
--- a/dts/upstream/src/arm64/renesas/r8a774b1.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a774b1.dtsi
@@ -2704,6 +2704,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clocks - can be overridden by the board */
diff --git a/dts/upstream/src/arm64/renesas/r8a774c0.dtsi b/dts/upstream/src/arm64/renesas/r8a774c0.dtsi
index 1ef43d78c3a..3e2af50ce7c 100644
--- a/dts/upstream/src/arm64/renesas/r8a774c0.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a774c0.dtsi
@@ -1990,6 +1990,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clocks - can be overridden by the board */
diff --git a/dts/upstream/src/arm64/renesas/r8a774e1.dtsi b/dts/upstream/src/arm64/renesas/r8a774e1.dtsi
index be55ae83944..1eeb4c7b4c4 100644
--- a/dts/upstream/src/arm64/renesas/r8a774e1.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a774e1.dtsi
@@ -2985,6 +2985,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clocks - can be overridden by the board */
diff --git a/dts/upstream/src/arm64/renesas/r8a77951.dtsi b/dts/upstream/src/arm64/renesas/r8a77951.dtsi
index bea4edd17d5..96f3b5fe7e9 100644
--- a/dts/upstream/src/arm64/renesas/r8a77951.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a77951.dtsi
@@ -3473,6 +3473,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clocks - can be overridden by the board */
diff --git a/dts/upstream/src/arm64/renesas/r8a77960.dtsi b/dts/upstream/src/arm64/renesas/r8a77960.dtsi
index 7846fea8e40..1122c470b72 100644
--- a/dts/upstream/src/arm64/renesas/r8a77960.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a77960.dtsi
@@ -3068,6 +3068,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clocks - can be overridden by the board */
diff --git a/dts/upstream/src/arm64/renesas/r8a77961.dtsi b/dts/upstream/src/arm64/renesas/r8a77961.dtsi
index 58f9286a5ab..bf1130af7de 100644
--- a/dts/upstream/src/arm64/renesas/r8a77961.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a77961.dtsi
@@ -2889,6 +2889,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clocks - can be overridden by the board */
diff --git a/dts/upstream/src/arm64/renesas/r8a77965.dtsi b/dts/upstream/src/arm64/renesas/r8a77965.dtsi
index 692940662d3..f02d1547b88 100644
--- a/dts/upstream/src/arm64/renesas/r8a77965.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a77965.dtsi
@@ -2877,6 +2877,7 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 
 	/* External USB clocks - can be overridden by the board */
diff --git a/dts/upstream/src/arm64/renesas/r8a77970.dtsi b/dts/upstream/src/arm64/renesas/r8a77970.dtsi
index d2d3cecc76d..64fb95b1c89 100644
--- a/dts/upstream/src/arm64/renesas/r8a77970.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a77970.dtsi
@@ -1223,5 +1223,6 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/r8a77980-condor.dts b/dts/upstream/src/arm64/renesas/r8a77980-condor.dts
index 68d1f1d53b3..1d326552e2f 100644
--- a/dts/upstream/src/arm64/renesas/r8a77980-condor.dts
+++ b/dts/upstream/src/arm64/renesas/r8a77980-condor.dts
@@ -14,11 +14,3 @@
 	model = "Renesas Condor board based on r8a77980";
 	compatible = "renesas,condor", "renesas,r8a77980";
 };
-
-&i2c0 {
-	eeprom@50 {
-		compatible = "rohm,br24t01", "atmel,24c01";
-		reg = <0x50>;
-		pagesize = <8>;
-	};
-};
diff --git a/dts/upstream/src/arm64/renesas/r8a77980.dtsi b/dts/upstream/src/arm64/renesas/r8a77980.dtsi
index c0ba110c74d..0c2b157036e 100644
--- a/dts/upstream/src/arm64/renesas/r8a77980.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a77980.dtsi
@@ -1630,5 +1630,6 @@
 				       IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 				       IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/r8a77990.dtsi b/dts/upstream/src/arm64/renesas/r8a77990.dtsi
index 37063e3f4e1..233af3081e8 100644
--- a/dts/upstream/src/arm64/renesas/r8a77990.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a77990.dtsi
@@ -2157,5 +2157,6 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/r8a77995.dtsi b/dts/upstream/src/arm64/renesas/r8a77995.dtsi
index 89990dd8ebf..5f0828a4675 100644
--- a/dts/upstream/src/arm64/renesas/r8a77995.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a77995.dtsi
@@ -1476,5 +1476,6 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/r8a779a0.dtsi b/dts/upstream/src/arm64/renesas/r8a779a0.dtsi
index cfa70b441e3..d76347001cc 100644
--- a/dts/upstream/src/arm64/renesas/r8a779a0.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a779a0.dtsi
@@ -2919,6 +2919,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/r8a779f0-spider-cpu.dtsi b/dts/upstream/src/arm64/renesas/r8a779f0-spider-cpu.dtsi
index 477f3114d2f..4ed8d4c3790 100644
--- a/dts/upstream/src/arm64/renesas/r8a779f0-spider-cpu.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a779f0-spider-cpu.dtsi
@@ -15,6 +15,12 @@
 	compatible = "renesas,spider-cpu", "renesas,r8a779f0";
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
 		serial0 = &hscif0;
 		serial1 = &scif0;
 	};
diff --git a/dts/upstream/src/arm64/renesas/r8a779f0.dtsi b/dts/upstream/src/arm64/renesas/r8a779f0.dtsi
index 72cf30341fc..9629adb47d9 100644
--- a/dts/upstream/src/arm64/renesas/r8a779f0.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a779f0.dtsi
@@ -1324,7 +1324,10 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 
 	ufs30_clk: ufs30-clk {
diff --git a/dts/upstream/src/arm64/renesas/r8a779f4-s4sk.dts b/dts/upstream/src/arm64/renesas/r8a779f4-s4sk.dts
index bc65a7b4d99..fa910b85859 100644
--- a/dts/upstream/src/arm64/renesas/r8a779f4-s4sk.dts
+++ b/dts/upstream/src/arm64/renesas/r8a779f4-s4sk.dts
@@ -14,6 +14,12 @@
 	compatible = "renesas,s4sk", "renesas,r8a779f4", "renesas,r8a779f0";
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
 		serial0 = &hscif0;
 		serial1 = &hscif1;
 		ethernet0 = &rswitch;
diff --git a/dts/upstream/src/arm64/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso b/dts/upstream/src/arm64/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
index e6f53377ecd..e6cf304c77e 100644
--- a/dts/upstream/src/arm64/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
+++ b/dts/upstream/src/arm64/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
@@ -155,11 +155,7 @@
 	pinctrl-0 = <&sound_clk_pins>, <&sound_pins>;
 	pinctrl-names = "default";
 
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
 	/* audio_clkout */
-	#clock-cells = <0>;
 	clock-frequency = <5644800>; /* 44.1kHz groups [(C) clock] */
 //	clock-frequency = <6144000>; /* 48  kHz groups [(C) clock] */
 
diff --git a/dts/upstream/src/arm64/renesas/r8a779g0.dtsi b/dts/upstream/src/arm64/renesas/r8a779g0.dtsi
index 9bc542bc616..53d1d4d8197 100644
--- a/dts/upstream/src/arm64/renesas/r8a779g0.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a779g0.dtsi
@@ -815,8 +815,6 @@
 			phy-mode = "rgmii";
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -862,8 +860,6 @@
 			phy-mode = "rgmii";
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -909,8 +905,6 @@
 			phy-mode = "rgmii";
 			rx-internal-delay-ps = <0>;
 			tx-internal-delay-ps = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -1724,18 +1718,6 @@
 		};
 
 		rcar_sound: sound@ec5a0000 {
-			/*
-			 * #sound-dai-cells is required
-			 *
-			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
-			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
-			 */
-			/*
-			 * #clock-cells is required
-			 *
-			 * clkout		: #clock-cells = <0>;	<&rcar_sound>;
-			 * audio_clkout0/1/2/3	: #clock-cells = <1>;	<&rcar_sound N>;
-			 */
 			compatible = "renesas,rcar_sound-r8a779g0", "renesas,rcar_sound-gen4";
 			reg = <0 0xec5a0000 0 0x020>,
 			      <0 0xec540000 0 0x1000>,
@@ -1745,6 +1727,11 @@
 
 			clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&audio_clkin>;
 			clock-names = "ssiu.0", "ssi.0", "clkin";
+			/* #clock-cells is fixed */
+			#clock-cells = <0>;
+			/* #sound-dai-cells is fixed */
+			#sound-dai-cells = <0>;
+
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
 			resets = <&cpg 2926>, <&cpg 2927>;
 			reset-names = "ssiu.0", "ssi.0";
@@ -2359,6 +2346,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/r8a779h0-gray-hawk-single.dts b/dts/upstream/src/arm64/renesas/r8a779h0-gray-hawk-single.dts
index cfbe8c8680c..2b9a19bb1c5 100644
--- a/dts/upstream/src/arm64/renesas/r8a779h0-gray-hawk-single.dts
+++ b/dts/upstream/src/arm64/renesas/r8a779h0-gray-hawk-single.dts
@@ -17,6 +17,10 @@
 	compatible = "renesas,gray-hawk-single", "renesas,r8a779h0";
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
 		serial0 = &hscif0;
 		serial1 = &hscif2;
 		ethernet0 = &avb0;
diff --git a/dts/upstream/src/arm64/renesas/r8a779h0.dtsi b/dts/upstream/src/arm64/renesas/r8a779h0.dtsi
index 6d791024cab..a03ab2b6a85 100644
--- a/dts/upstream/src/arm64/renesas/r8a779h0.dtsi
+++ b/dts/upstream/src/arm64/renesas/r8a779h0.dtsi
@@ -14,9 +14,15 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	/* External Audio clock - to be overridden by boards that provide it */
+	audio_clkin: audio_clkin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	cluster0_opp: opp-table-0 {
 		compatible = "operating-points-v2";
-		opp-shared;
 
 		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
@@ -939,6 +945,454 @@
 			status = "disabled";
 		};
 
+		vin00: video@e6ef0000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 730>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 730>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin00isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin00>;
+					};
+				};
+			};
+		};
+
+		vin01: video@e6ef1000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 731>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 731>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin01isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin01>;
+					};
+				};
+			};
+		};
+
+		vin02: video@e6ef2000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 800>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 800>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin02isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin02>;
+					};
+				};
+			};
+		};
+
+		vin03: video@e6ef3000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 801>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 801>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin03isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin03>;
+					};
+				};
+			};
+		};
+
+		vin04: video@e6ef4000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 802>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin04isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin04>;
+					};
+				};
+			};
+		};
+
+		vin05: video@e6ef5000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 803>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 803>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin05isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin05>;
+					};
+				};
+			};
+		};
+
+		vin06: video@e6ef6000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 804>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin06isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin06>;
+					};
+				};
+			};
+		};
+
+		vin07: video@e6ef7000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 805>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin07isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin07>;
+					};
+				};
+			};
+		};
+
+		vin08: video@e6ef8000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6ef8000 0 0x1000>;
+			interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 806>;
+			renesas,id = <8>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin08isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin08>;
+					};
+				};
+			};
+		};
+
+		vin09: video@e6ef9000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6ef9000 0 0x1000>;
+			interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 807>;
+			renesas,id = <9>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin09isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin09>;
+					};
+				};
+			};
+		};
+
+		vin10: video@e6efa000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6efa000 0 0x1000>;
+			interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 808>;
+			renesas,id = <10>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin10isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin10>;
+					};
+				};
+			};
+		};
+
+		vin11: video@e6efb000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6efb000 0 0x1000>;
+			interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 809>;
+			renesas,id = <11>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin11isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin11>;
+					};
+				};
+			};
+		};
+
+		vin12: video@e6efc000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6efc000 0 0x1000>;
+			interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 810>;
+			renesas,id = <12>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin12isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin12>;
+					};
+				};
+			};
+		};
+
+		vin13: video@e6efd000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6efd000 0 0x1000>;
+			interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 811>;
+			renesas,id = <13>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin13isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin13>;
+					};
+				};
+			};
+		};
+
+		vin14: video@e6efe000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6efe000 0 0x1000>;
+			interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 812>;
+			renesas,id = <14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin14isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin14>;
+					};
+				};
+			};
+		};
+
+		vin15: video@e6eff000 {
+			compatible = "renesas,vin-r8a779h0";
+			reg = <0 0xe6eff000 0 0x1000>;
+			interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 813>;
+			renesas,id = <15>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin15isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin15>;
+					};
+				};
+			};
+		};
+
 		dmac1: dma-controller@e7350000 {
 			compatible = "renesas,dmac-r8a779h0",
 				     "renesas,rcar-gen4-dmac";
@@ -1011,6 +1465,67 @@
 				 <&ipmmu_ds0 22>, <&ipmmu_ds0 23>;
 		};
 
+		rcar_sound: sound@ec400000 {
+			compatible = "renesas,rcar_sound-r8a779h0", "renesas,rcar_sound-gen4";
+			reg = <0 0xec400000 0 0x40000>,
+			      <0 0xec540000 0 0x1000>,
+			      <0 0xec541000 0 0x050>,
+			      <0 0xec5a0000 0 0x020>;
+			reg-names = "sdmc", "ssiu", "ssi", "adg";
+			clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&audio_clkin>;
+			clock-names = "ssiu.0", "ssi.0", "clkin";
+			/* #clock-cells is fixed */
+			#clock-cells = <0>;
+			/* #sound-dai-cells is fixed */
+			#sound-dai-cells = <0>;
+
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 2926>, <&cpg 2927>;
+			reset-names = "ssiu.0", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&dmac1 0x6e>, <&dmac1 0x6f>;
+					dma-names = "tx", "rx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&dmac1 0x6c>, <&dmac1 0x6d>;
+					dma-names = "tx", "rx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&dmac1 0x6a>, <&dmac1 0x6b>;
+					dma-names = "tx", "rx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&dmac1 0x68>, <&dmac1 0x69>;
+					dma-names = "tx", "rx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&dmac1 0x66>, <&dmac1 0x67>;
+					dma-names = "tx", "rx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&dmac1 0x64>, <&dmac1 0x65>;
+					dma-names = "tx", "rx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&dmac1 0x62>, <&dmac1 0x63>;
+					dma-names = "tx", "rx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&dmac1 0x60>, <&dmac1 0x61>;
+					dma-names = "tx", "rx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
 		mmc0: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a779h0",
 				     "renesas,rcar-gen4-sdhi";
@@ -1152,6 +1667,224 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		csi40: csi2@fe500000 {
+			compatible = "renesas,r8a779h0-csi2";
+			reg = <0 0xfe500000 0 0x40000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 331>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi40isp0: endpoint {
+						remote-endpoint = <&isp0csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@fe540000 {
+			compatible = "renesas,r8a779h0-csi2";
+			reg = <0 0xfe540000 0 0x40000>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 400>;
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 400>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi41isp1: endpoint {
+						remote-endpoint = <&isp1csi41>;
+					};
+				};
+			};
+		};
+
+		isp0: isp@fed00000 {
+			compatible = "renesas,r8a779h0-isp";
+			reg = <0 0xfed00000 0 0x10000>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cpg CPG_MOD 612>;
+			power-domains = <&sysc R8A779H0_PD_A3ISP0>;
+			resets = <&cpg 612>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp0csi40: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi40isp0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp0vin00: endpoint {
+						remote-endpoint = <&vin00isp0>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp0vin01: endpoint {
+						remote-endpoint = <&vin01isp0>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp0vin02: endpoint {
+						remote-endpoint = <&vin02isp0>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp0vin03: endpoint {
+						remote-endpoint = <&vin03isp0>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp0vin04: endpoint {
+						remote-endpoint = <&vin04isp0>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp0vin05: endpoint {
+						remote-endpoint = <&vin05isp0>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp0vin06: endpoint {
+						remote-endpoint = <&vin06isp0>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp0vin07: endpoint {
+						remote-endpoint = <&vin07isp0>;
+					};
+				};
+			};
+		};
+
+		isp1: isp@fed20000 {
+			compatible = "renesas,r8a779h0-isp";
+			reg = <0 0xfed20000 0 0x10000>;
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cpg CPG_MOD 613>;
+			power-domains = <&sysc R8A779H0_PD_A3ISP0>;
+			resets = <&cpg 613>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp1csi41: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&csi41isp1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp1vin08: endpoint {
+						remote-endpoint = <&vin08isp1>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp1vin09: endpoint {
+						remote-endpoint = <&vin09isp1>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp1vin10: endpoint {
+						remote-endpoint = <&vin10isp1>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp1vin11: endpoint {
+						remote-endpoint = <&vin11isp1>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp1vin12: endpoint {
+						remote-endpoint = <&vin12isp1>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp1vin13: endpoint {
+						remote-endpoint = <&vin13isp1>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp1vin14: endpoint {
+						remote-endpoint = <&vin14isp1>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp1vin15: endpoint {
+						remote-endpoint = <&vin15isp1>;
+					};
+				};
+			};
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
@@ -1195,5 +1928,7 @@
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/r9a07g043.dtsi b/dts/upstream/src/arm64/renesas/r9a07g043.dtsi
index 6212ee550f3..2eccab9c896 100644
--- a/dts/upstream/src/arm64/renesas/r9a07g043.dtsi
+++ b/dts/upstream/src/arm64/renesas/r9a07g043.dtsi
@@ -646,7 +646,7 @@
 
 		sdhi0: mmc@11c00000 {
 			compatible = "renesas,sdhi-r9a07g043",
-				     "renesas,rcar-gen3-sdhi";
+				     "renesas,rzg2l-sdhi";
 			reg = <0x0 0x11c00000 0 0x10000>;
 			interrupts = <SOC_PERIPHERAL_IRQ(104) IRQ_TYPE_LEVEL_HIGH>,
 				     <SOC_PERIPHERAL_IRQ(105) IRQ_TYPE_LEVEL_HIGH>;
@@ -662,7 +662,7 @@
 
 		sdhi1: mmc@11c10000 {
 			compatible = "renesas,sdhi-r9a07g043",
-				     "renesas,rcar-gen3-sdhi";
+				     "renesas,rzg2l-sdhi";
 			reg = <0x0 0x11c10000 0 0x10000>;
 			interrupts = <SOC_PERIPHERAL_IRQ(106) IRQ_TYPE_LEVEL_HIGH>,
 				     <SOC_PERIPHERAL_IRQ(107) IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/upstream/src/arm64/renesas/r9a07g043u.dtsi b/dts/upstream/src/arm64/renesas/r9a07g043u.dtsi
index 165bfcfef3b..18ef297db93 100644
--- a/dts/upstream/src/arm64/renesas/r9a07g043u.dtsi
+++ b/dts/upstream/src/arm64/renesas/r9a07g043u.dtsi
@@ -50,7 +50,10 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
 
diff --git a/dts/upstream/src/arm64/renesas/r9a07g044.dtsi b/dts/upstream/src/arm64/renesas/r9a07g044.dtsi
index 88634ae4328..d3838e5820f 100644
--- a/dts/upstream/src/arm64/renesas/r9a07g044.dtsi
+++ b/dts/upstream/src/arm64/renesas/r9a07g044.dtsi
@@ -1050,7 +1050,7 @@
 
 		sdhi0: mmc@11c00000 {
 			compatible = "renesas,sdhi-r9a07g044",
-				     "renesas,rcar-gen3-sdhi";
+				     "renesas,rzg2l-sdhi";
 			reg = <0x0 0x11c00000 0 0x10000>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
@@ -1066,7 +1066,7 @@
 
 		sdhi1: mmc@11c10000 {
 			compatible = "renesas,sdhi-r9a07g044",
-				     "renesas,rcar-gen3-sdhi";
+				     "renesas,rzg2l-sdhi";
 			reg = <0x0 0x11c10000 0 0x10000>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
@@ -1334,6 +1334,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/r9a07g054.dtsi b/dts/upstream/src/arm64/renesas/r9a07g054.dtsi
index e89bfe4085f..1de2e5f0917 100644
--- a/dts/upstream/src/arm64/renesas/r9a07g054.dtsi
+++ b/dts/upstream/src/arm64/renesas/r9a07g054.dtsi
@@ -1058,7 +1058,7 @@
 
 		sdhi0: mmc@11c00000 {
 			compatible = "renesas,sdhi-r9a07g054",
-				     "renesas,rcar-gen3-sdhi";
+				     "renesas,rzg2l-sdhi";
 			reg = <0x0 0x11c00000 0 0x10000>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
@@ -1074,7 +1074,7 @@
 
 		sdhi1: mmc@11c10000 {
 			compatible = "renesas,sdhi-r9a07g054",
-				     "renesas,rcar-gen3-sdhi";
+				     "renesas,rzg2l-sdhi";
 			reg = <0x0 0x11c10000 0 0x10000>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
@@ -1342,6 +1342,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/r9a08g045.dtsi b/dts/upstream/src/arm64/renesas/r9a08g045.dtsi
index f5f3f4f4c8d..0d5c47a65e4 100644
--- a/dts/upstream/src/arm64/renesas/r9a08g045.dtsi
+++ b/dts/upstream/src/arm64/renesas/r9a08g045.dtsi
@@ -182,7 +182,7 @@
 		};
 
 		sdhi0: mmc@11c00000  {
-			compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi";
+			compatible = "renesas,sdhi-r9a08g045", "renesas,rzg2l-sdhi";
 			reg = <0x0 0x11c00000 0 0x10000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
@@ -197,7 +197,7 @@
 		};
 
 		sdhi1: mmc@11c10000 {
-			compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi";
+			compatible = "renesas,sdhi-r9a08g045", "renesas,rzg2l-sdhi";
 			reg = <0x0 0x11c10000 0 0x10000>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
@@ -212,7 +212,7 @@
 		};
 
 		sdhi2: mmc@11c20000 {
-			compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi";
+			compatible = "renesas,sdhi-r9a08g045", "renesas,rzg2l-sdhi";
 			reg = <0x0 0x11c20000 0 0x10000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -294,6 +294,9 @@
 		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
 				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys",
+				  "hyp-virt";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/r9a09g011.dtsi b/dts/upstream/src/arm64/renesas/r9a09g011.dtsi
index 50ed66d42a2..9a4cbef704c 100644
--- a/dts/upstream/src/arm64/renesas/r9a09g011.dtsi
+++ b/dts/upstream/src/arm64/renesas/r9a09g011.dtsi
@@ -71,7 +71,7 @@
 
 		sdhi0: mmc@85000000 {
 			compatible = "renesas,sdhi-r9a09g011",
-				     "renesas,rcar-gen3-sdhi";
+				     "renesas,rzg2l-sdhi";
 			reg = <0x0 0x85000000 0 0x2000>;
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
@@ -87,7 +87,7 @@
 
 		sdhi1: mmc@85010000  {
 			compatible = "renesas,sdhi-r9a09g011",
-				     "renesas,rcar-gen3-sdhi";
+				     "renesas,rzg2l-sdhi";
 			reg = <0x0 0x85010000 0 0x2000>;
 			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
@@ -103,7 +103,7 @@
 
 		emmc: mmc@85020000  {
 			compatible = "renesas,sdhi-r9a09g011",
-				     "renesas,rcar-gen3-sdhi";
+				     "renesas,rzg2l-sdhi";
 			reg = <0x0 0x85020000 0 0x2000>;
 			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
@@ -372,5 +372,6 @@
 				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys";
 	};
 };
diff --git a/dts/upstream/src/arm64/renesas/rz-smarc-common.dtsi b/dts/upstream/src/arm64/renesas/rz-smarc-common.dtsi
index b7a3e6caa38..b34855956ae 100644
--- a/dts/upstream/src/arm64/renesas/rz-smarc-common.dtsi
+++ b/dts/upstream/src/arm64/renesas/rz-smarc-common.dtsi
@@ -54,14 +54,6 @@
 		};
 	};
 
-	usb0_vbus_otg: regulator-usb0-vbus-otg {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB0_VBUS_OTG";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
 	vccq_sdhi1: regulator-vccq-sdhi1 {
 		compatible = "regulator-gpio";
 		regulator-name = "SDHI1 VccQ";
@@ -139,6 +131,9 @@
 
 &phyrst {
 	status = "okay";
+	usb0_vbus_otg: regulator-vbus {
+		regulator-name = "vbus";
+	};
 };
 
 &scif0 {
diff --git a/dts/upstream/src/arm64/renesas/white-hawk-cpu-common.dtsi b/dts/upstream/src/arm64/renesas/white-hawk-cpu-common.dtsi
index 8ac17370ff3..80496fb3d47 100644
--- a/dts/upstream/src/arm64/renesas/white-hawk-cpu-common.dtsi
+++ b/dts/upstream/src/arm64/renesas/white-hawk-cpu-common.dtsi
@@ -13,6 +13,12 @@
 / {
 	aliases {
 		ethernet0 = &avb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
 		serial0 = &hscif0;
 	};
 
@@ -142,18 +148,23 @@
 &avb0 {
 	pinctrl-0 = <&avb0_pins>;
 	pinctrl-names = "default";
-	phy-handle = <&phy0>;
+	phy-handle = <&avb0_phy>;
 	tx-internal-delay-ps = <2000>;
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		avb0_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			rxc-skew-ps = <1500>;
+			reg = <0>;
+			interrupt-parent = <&gpio7>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
 
diff --git a/dts/upstream/src/arm64/renesas/white-hawk-ethernet.dtsi b/dts/upstream/src/arm64/renesas/white-hawk-ethernet.dtsi
index a218fda337c..595ec4ff4cd 100644
--- a/dts/upstream/src/arm64/renesas/white-hawk-ethernet.dtsi
+++ b/dts/upstream/src/arm64/renesas/white-hawk-ethernet.dtsi
@@ -6,6 +6,57 @@
  * Copyright (C) 2022 Glider bv
  */
 
+/ {
+	aliases {
+		ethernet1 = &avb1;
+		ethernet2 = &avb2;
+	};
+};
+
+&avb1 {
+	pinctrl-0 = <&avb1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb1_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		avb1_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <0>;
+			interrupt-parent = <&gpio6>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&avb2 {
+	pinctrl-0 = <&avb2_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&avb2_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		reset-post-delay-us = <4000>;
+
+		avb2_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <0>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
 &i2c0 {
 	eeprom@53 {
 		compatible = "rohm,br24g01", "atmel,24c01";
@@ -14,3 +65,55 @@
 		pagesize = <8>;
 	};
 };
+
+&pfc {
+	avb1_pins: avb1 {
+		mux {
+			groups = "avb1_link", "avb1_mdio", "avb1_rgmii",
+				 "avb1_txcrefclk";
+			function = "avb1";
+		};
+
+		mdio {
+			groups = "avb1_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "avb1_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		link {
+			groups = "avb1_link";
+			bias-disable;
+		};
+	};
+
+	avb2_pins: avb2 {
+		mux {
+			groups = "avb2_link", "avb2_mdio", "avb2_rgmii",
+				 "avb2_txcrefclk";
+			function = "avb2";
+		};
+
+		mdio {
+			groups = "avb2_mdio";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		rgmii {
+			groups = "avb2_rgmii";
+			drive-strength = <24>;
+			bias-disable;
+		};
+
+		link {
+			groups = "avb2_link";
+			bias-disable;
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3328-rock-pi-e.dts b/dts/upstream/src/arm64/rockchip/rk3328-rock-pi-e.dts
index a608a219543..3e08e2fd0a7 100644
--- a/dts/upstream/src/arm64/rockchip/rk3328-rock-pi-e.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3328-rock-pi-e.dts
@@ -387,7 +387,7 @@
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
diff --git a/dts/upstream/src/arm64/rockchip/rk3328-rock64.dts b/dts/upstream/src/arm64/rockchip/rk3328-rock64.dts
index 229fe9da9c2..90fef766f3a 100644
--- a/dts/upstream/src/arm64/rockchip/rk3328-rock64.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3328-rock64.dts
@@ -154,6 +154,8 @@
 };
 
 &hdmi {
+	avdd-0v9-supply = <&vdd_10>;
+	avdd-1v8-supply = <&vcc_18>;
 	status = "okay";
 };
 
diff --git a/dts/upstream/src/arm64/rockchip/rk3328.dtsi b/dts/upstream/src/arm64/rockchip/rk3328.dtsi
index 07dcc949b89..b01efd6d042 100644
--- a/dts/upstream/src/arm64/rockchip/rk3328.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3328.dtsi
@@ -850,8 +850,8 @@
 			<0>, <24000000>,
 			<24000000>, <24000000>,
 			<15000000>, <15000000>,
-			<100000000>, <100000000>,
-			<100000000>, <100000000>,
+			<300000000>, <100000000>,
+			<400000000>, <100000000>,
 			<50000000>, <100000000>,
 			<100000000>, <100000000>,
 			<50000000>, <50000000>,
diff --git a/dts/upstream/src/arm64/rockchip/rk3368-lba3368.dts b/dts/upstream/src/arm64/rockchip/rk3368-lba3368.dts
new file mode 100644
index 00000000000..e0cc4da7f39
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3368-lba3368.dts
@@ -0,0 +1,659 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/rt5640.h>
+#include "rk3368.dtsi"
+
+/ {
+	model = "Neardi LBA3368";
+	compatible = "neardi,lba3368", "rockchip,rk3368";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio0;
+		rtc0 = &hym8563;
+		rtc1 = &rk808;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	adc-key {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		poll-interval = <100>;
+		keyup-threshold-microvolt = <1800000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s_8ch_p0>;
+		hp-det-gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		label = "alc5640";
+		routing = "Mic Jack", "MICBIAS1",
+			  "IN1P", "Mic Jack",
+			  "Headphone Jack", "HPOL",
+			  "Headphone Jack", "HPOR",
+			  "Speakers", "SPORP",
+			  "Speakers", "SPORN",
+			  "Speakers", "SPOLP",
+			  "Speakers", "SPOLN";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphone Jack",
+			  "Speaker", "Speakers";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det>;
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	hub_avdd: hub-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "hub_avdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-led {
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on>;
+	};
+
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+		regulator-always-on;
+	};
+
+	vcc_otg: vcc-otg-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd10_usb: vdd10-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd10_usb";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		vin-supply = <&vdd_10>;
+		regulator-always-on;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_18>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	cap-mmc-highspeed;
+	non-removable;
+	no-sd;
+	no-sdio;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "input";
+	phy-handle = <&phy>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc_lan>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			max-speed = <100>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000000>;
+			reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&phy_rst>;
+		};
+	};
+};
+
+&io_domains {
+	audio-supply = <&vcca1v8_codec>;
+	dvp-supply = <&vcc_18>;
+	flash0-supply = <&vcc_18>;
+	gpio1830-supply = <&vcc_io>;
+	gpio30-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vdd1v8_wl>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupts-extended = <&gpio0 RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k_wifi_bt";
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &pmic_sleep>;
+		system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_cpu";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-suspend-microvolt = <1000000>;
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-suspend-microvolt = <3300000>;
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG1 {
+				regulator-name = "vcca1v8_codec";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG2 {
+				regulator-name = "vcca3v0_codec";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-suspend-microvolt = <1000000>;
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd1v8_wl: LDO_REG4 {
+				regulator-name = "vdd1v8_wl";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-suspend-microvolt = <1800000>;
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_tp: SWITCH_REG1 {
+				regulator-name = "vcc_tp";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_sd: SWITCH_REG2 {
+				regulator-name = "vcc_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	codec@1c {
+		compatible = "realtek,rt5640";
+		reg = <0x1c>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_IN1P>;
+		realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_IN1N>;
+		realtek,in1-differential;
+		#sound-dai-cells = <0>;
+
+		port {
+			rt5640_p0_0: endpoint {
+				remote-endpoint = <&i2s_8ch_p0_0>;
+			};
+		};
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		clock-output-names = "xin32k";
+		#clock-cells = <0>;
+	};
+};
+
+&i2s_8ch {
+	status = "okay";
+
+	i2s_8ch_p0: port {
+		i2s_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&rt5640_p0_0>;
+		};
+	};
+};
+
+&pinctrl {
+	bluetooth {
+		bt_host_wake: bt-host-wake {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake: bt-wake {
+			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	phy {
+		phy_rst: phy-rst {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_det: hp-det {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake: wifi-host-wake {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu-supply = <&vcc_io>;
+	vop-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vdd1v8_wl>;
+	assigned-clocks = <&cru SCLK_SDIO0>;
+	assigned-clock-parents = <&cru PLL_CPLL>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	no-sd;
+	no-mmc;
+	non-removable;
+	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupts-extended = <&gpio3 RK_PA6 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4 &sdmmc_cd>;
+	cap-sd-highspeed;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		interrupts-extended = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wakeup";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+		max-speed = <15000000>;
+		vbat-supply = <&vcc_io>;
+		vddio-supply = <&vdd1v8_wl>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake &bt_wake &bt_reg_on>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&hub_avdd>;
+	};
+};
+
+&usb_otg {
+	vbus-supply = <&vcc_otg>;
+	vusb_a-supply = <&vcc_io>;
+	vusb_d-supply = <&vdd10_usb>;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3399-pinephone-pro.dts b/dts/upstream/src/arm64/rockchip/rk3399-pinephone-pro.dts
index e5709c7ee06..ef754ea30a9 100644
--- a/dts/upstream/src/arm64/rockchip/rk3399-pinephone-pro.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3399-pinephone-pro.dts
@@ -12,6 +12,7 @@
 /dts-v1/;
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
 
@@ -69,6 +70,34 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&red_led_pin &green_led_pin &blue_led_pin>;
+
+		led_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_green: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_blue: led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	multi-led {
+		compatible = "leds-group-multicolor";
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_INDICATOR;
+		leds = <&led_red>, <&led_green>, <&led_blue>;
+	};
+
 	vcc_sys: vcc-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -152,6 +181,12 @@
 		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vcc3v3_sys>;
+	};
 };
 
 &cpu_alert0 {
@@ -407,6 +442,21 @@
 	};
 };
 
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	/* Accelerometer/gyroscope */
+	mpu6500@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
 &cluster0_opp {
 	opp04 {
 		status = "disabled";
@@ -481,6 +531,20 @@
 		};
 	};
 
+	leds {
+		red_led_pin: red-led-pin {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		green_led_pin: green-led-pin {
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -565,6 +629,16 @@
 	status = "okay";
 };
 
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <1>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3399-puma.dtsi b/dts/upstream/src/arm64/rockchip/rk3399-puma.dtsi
index ccbe3a7a1d2..d24444cdf54 100644
--- a/dts/upstream/src/arm64/rockchip/rk3399-puma.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3399-puma.dtsi
@@ -154,6 +154,22 @@
 	};
 };
 
+&gpio3 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
+	 * eMMC and SPI flash powered-down initially (in fact it keeps the
+	 * reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override
+	 * that signal so that eMMC and SPI can be used regardless of the state
+	 * of the signal.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PD5 GPIO_ACTIVE_LOW>;
+		gpio-hog;
+		line-name = "bios_disable_override";
+		output-high;
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
@@ -409,6 +425,7 @@
 
 &i2s0 {
 	pinctrl-0 = <&i2s0_2ch_bus>;
+	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
 	status = "okay";
@@ -417,8 +434,8 @@
 /*
  * As Q7 does not specify neither a global nor a RX clock for I2S these
  * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
- * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
- * conflicts.
+ * Therefore we have to redefine the i2s0_2ch_bus and i2s0_2ch_bus_bclk_off
+ * definitions to prevent conflicts.
  */
 &i2s0_2ch_bus {
 	rockchip,pins =
@@ -428,6 +445,14 @@
 		<3 RK_PD7 1 &pcfg_pull_none>;
 };
 
+&i2s0_2ch_bus_bclk_off {
+	rockchip,pins =
+		<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcc_1v8>;
@@ -449,9 +474,14 @@
 
 &pinctrl {
 	pinctrl-names = "default";
-	pinctrl-0 = <&q7_thermal_pin>;
+	pinctrl-0 = <&q7_thermal_pin &bios_disable_override_hog_pin>;
 
 	gpios {
+		bios_disable_override_hog_pin: bios-disable-override-hog-pin {
+			rockchip,pins =
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
 		q7_thermal_pin: q7-thermal-pin {
 			rockchip,pins =
 				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3399pro.dtsi b/dts/upstream/src/arm64/rockchip/rk3399pro.dtsi
deleted file mode 100644
index bb5ebf6608b..00000000000
--- a/dts/upstream/src/arm64/rockchip/rk3399pro.dtsi
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
-
-#include "rk3399.dtsi"
-
-/ {
-	compatible = "rockchip,rk3399pro";
-};
-
-/* Default to enabled since AP talk to NPU part over pcie */
-&pcie_phy {
-	status = "okay";
-};
-
-/* Default to enabled since AP talk to NPU part over pcie */
-&pcie0 {
-	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreqn_cpm>;
-	status = "okay";
-};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-pinenote.dtsi b/dts/upstream/src/arm64/rockchip/rk3566-pinenote.dtsi
index d899087bf0b..ae2536c65a8 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-pinenote.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3566-pinenote.dtsi
@@ -674,6 +674,7 @@
 };
 
 &uart1 {
+	dma-names = "tx", "rx";
 	pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-quartz64-a.dts b/dts/upstream/src/arm64/rockchip/rk3566-quartz64-a.dts
index 0b191d8462a..37a1303d9a3 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-quartz64-a.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-quartz64-a.dts
@@ -738,6 +738,7 @@
 };
 
 &uart1 {
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 	status = "okay";
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-quartz64-b.dts b/dts/upstream/src/arm64/rockchip/rk3566-quartz64-b.dts
index b908ce006c2..13e599a85eb 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-quartz64-b.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-quartz64-b.dts
@@ -652,6 +652,7 @@
 };
 
 &uart1 {
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 	status = "okay";
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-roc-pc.dts b/dts/upstream/src/arm64/rockchip/rk3566-roc-pc.dts
index 63eea27293f..67e7801bd48 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-roc-pc.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-roc-pc.dts
@@ -269,7 +269,7 @@
 		vcc9-supply = <&vcc3v3_sys>;
 
 		codec {
-			mic-in-differential;
+			rockchip,mic-in-differential;
 		};
 
 		regulators {
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-soquartz.dtsi b/dts/upstream/src/arm64/rockchip/rk3566-soquartz.dtsi
index dd4e9c1893c..e42c474ef4a 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-soquartz.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3566-soquartz.dtsi
@@ -614,6 +614,7 @@
 };
 
 &uart1 {
+	dma-names = "tx", "rx";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 	uart-has-rtscts;
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-evb1-v10.dts b/dts/upstream/src/arm64/rockchip/rk3568-evb1-v10.dts
index 19f8fc369b1..8c3ab07d380 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-evb1-v10.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-evb1-v10.dts
@@ -475,7 +475,7 @@
 		};
 
 		codec {
-			mic-in-differential;
+			rockchip,mic-in-differential;
 		};
 	};
 };
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r66s.dts b/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r66s.dts
index 58ab7e9971d..b5e67990dd0 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r66s.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r66s.dts
@@ -11,6 +11,10 @@
 	};
 };
 
+&pmu_io_domains {
+	vccio3-supply = <&vccio_sd>;
+};
+
 &sdmmc0 {
 	bus-width = <4>;
 	cap-mmc-highspeed;
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r66s.dtsi b/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r66s.dtsi
index 89e84e3a926..25c49bdbadb 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r66s.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r66s.dtsi
@@ -39,9 +39,9 @@
 		};
 	};
 
-	dc_12v: dc-12v-regulator {
+	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
+		regulator-name = "vcc12v_dcin";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <12000000>;
@@ -65,7 +65,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
+		vin-supply = <&vcc12v_dcin>;
 	};
 
 	vcc5v0_sys: vcc5v0-sys-regulator {
@@ -75,16 +75,7 @@
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb_host";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
 	};
 
 	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
@@ -94,8 +85,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_usb_otg_en>;
 		regulator-name = "vcc5v0_usb_otg";
-		regulator-always-on;
-		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
@@ -123,6 +115,10 @@
 	cpu-supply = <&vdd_cpu>;
 };
 
+&display_subsystem {
+	status = "disabled";
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu>;
 	status = "okay";
@@ -405,8 +401,8 @@
 &pmu_io_domains {
 	pmuio1-supply = <&vcc3v3_pmu>;
 	pmuio2-supply = <&vcc3v3_pmu>;
-	vccio1-supply = <&vccio_acodec>;
-	vccio3-supply = <&vccio_sd>;
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vcc_1v8>;
 	vccio4-supply = <&vcc_1v8>;
 	vccio5-supply = <&vcc_3v3>;
 	vccio6-supply = <&vcc_1v8>;
@@ -429,28 +425,12 @@
 	status = "okay";
 };
 
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
 &usb_host0_xhci {
 	dr_mode = "host";
 	extcon = <&usb2phy0>;
 	status = "okay";
 };
 
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
 &usb_host1_xhci {
 	status = "okay";
 };
@@ -460,7 +440,7 @@
 };
 
 &usb2phy0_host {
-	phy-supply = <&vcc5v0_usb_host>;
+	phy-supply = <&vcc5v0_sys>;
 	status = "okay";
 };
 
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r68s.dts b/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r68s.dts
index e1fe5e44268..ce2a5e1ccef 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r68s.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-fastrhino-r68s.dts
@@ -39,7 +39,7 @@
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 15ms, 50ms for rtl8211f */
 	snps,reset-delays-us = <0 15000 50000>;
@@ -61,7 +61,7 @@
 		     &gmac1m1_rx_bus2
 		     &gmac1m1_rgmii_clk
 		     &gmac1m1_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 15ms, 50ms for rtl8211f */
 	snps,reset-delays-us = <0 15000 50000>;
@@ -71,18 +71,18 @@
 };
 
 &mdio0 {
-	rgmii_phy0: ethernet-phy@0 {
+	rgmii_phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
+		reg = <0x1>;
 		pinctrl-0 = <&eth_phy0_reset_pin>;
 		pinctrl-names = "default";
 	};
 };
 
 &mdio1 {
-	rgmii_phy1: ethernet-phy@0 {
+	rgmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
+		reg = <0x1>;
 		pinctrl-0 = <&eth_phy1_reset_pin>;
 		pinctrl-names = "default";
 	};
@@ -102,6 +102,10 @@
 	};
 };
 
+&pmu_io_domains {
+	vccio3-supply = <&vcc_3v3>;
+};
+
 &sdhci {
 	bus-width = <8>;
 	max-frequency = <200000000>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-rock-3a.dts b/dts/upstream/src/arm64/rockchip/rk3568-rock-3a.dts
index ebdedea15ad..59f1403b4fa 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-rock-3a.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-rock-3a.dts
@@ -531,10 +531,6 @@
 				};
 			};
 		};
-
-		codec {
-			mic-in-differential;
-		};
 	};
 };
 
diff --git a/dts/upstream/src/arm64/rockchip/rk356x.dtsi b/dts/upstream/src/arm64/rockchip/rk356x.dtsi
index d8543b5557e..c72b3a608ed 100644
--- a/dts/upstream/src/arm64/rockchip/rk356x.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk356x.dtsi
@@ -195,32 +195,32 @@
 
 		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <825000>;
+			opp-microvolt = <850000 850000 1000000>;
 		};
 
 		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <825000>;
+			opp-microvolt = <850000 850000 1000000>;
 		};
 
 		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <825000>;
+			opp-microvolt = <850000 850000 1000000>;
 		};
 
 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <825000>;
+			opp-microvolt = <900000 900000 1000000>;
 		};
 
 		opp-700000000 {
 			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <900000>;
+			opp-microvolt = <950000 950000 1000000>;
 		};
 
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1000000>;
+			opp-microvolt = <1000000 1000000 1000000>;
 		};
 	};
 
@@ -790,6 +790,7 @@
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
+		power-domains = <&power RK3568_PD_VO>;
 		status = "disabled";
 	};
 
@@ -1591,10 +1592,9 @@
 			 <&cru SRST_TSADCPHY>;
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <95000>;
-		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&tsadc_pin>;
-		pinctrl-1 = <&tsadc_shutorg>;
-		pinctrl-2 = <&tsadc_pin>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&tsadc_shutorg>;
+		pinctrl-1 = <&tsadc_pin>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts b/dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts
index 98c622b2764..c667704ba98 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-armsom-sige7.dts
@@ -673,6 +673,10 @@
 	};
 };
 
+&tsadc {
+	status = "okay";
+};
+
 &u2phy0 {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-base.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-base.dtsi
index 78bc9dc9704..ee99166ebd4 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-base.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588-base.dtsi
@@ -451,46 +451,8 @@
 			     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "job", "mmu", "gpu";
-		operating-points-v2 = <&gpu_opp_table>;
 		power-domains = <&power RK3588_PD_GPU>;
 		status = "disabled";
-
-		gpu_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-300000000 {
-				opp-hz = /bits/ 64 <300000000>;
-				opp-microvolt = <675000 675000 850000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <675000 675000 850000>;
-			};
-			opp-500000000 {
-				opp-hz = /bits/ 64 <500000000>;
-				opp-microvolt = <675000 675000 850000>;
-			};
-			opp-600000000 {
-				opp-hz = /bits/ 64 <600000000>;
-				opp-microvolt = <675000 675000 850000>;
-			};
-			opp-700000000 {
-				opp-hz = /bits/ 64 <700000000>;
-				opp-microvolt = <700000 700000 850000>;
-			};
-			opp-800000000 {
-				opp-hz = /bits/ 64 <800000000>;
-				opp-microvolt = <750000 750000 850000>;
-			};
-			opp-900000000 {
-				opp-hz = /bits/ 64 <900000000>;
-				opp-microvolt = <800000 800000 850000>;
-			};
-			opp-1000000000 {
-				opp-hz = /bits/ 64 <1000000000>;
-				opp-microvolt = <850000 850000 850000>;
-			};
-		};
 	};
 
 	usb_host0_xhci: usb@fc000000 {
@@ -620,14 +582,14 @@
 	};
 
 	vo0_grf: syscon@fd5a6000 {
-		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		compatible = "rockchip,rk3588-vo0-grf", "syscon";
 		reg = <0x0 0xfd5a6000 0x0 0x2000>;
 		clocks = <&cru PCLK_VO0GRF>;
 	};
 
 	vo1_grf: syscon@fd5a8000 {
-		compatible = "rockchip,rk3588-vo-grf", "syscon";
-		reg = <0x0 0xfd5a8000 0x0 0x100>;
+		compatible = "rockchip,rk3588-vo1-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x4000>;
 		clocks = <&cru PCLK_VO1GRF>;
 	};
 
@@ -2493,17 +2455,31 @@
 		};
 
 		gpu_thermal: gpu-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <100>;
 			polling-delay = <0>;
 			thermal-sensors = <&tsadc 5>;
 
 			trips {
+				gpu_alert: gpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
 				gpu_crit: gpu-crit {
 					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		npu_thermal: npu-thermal {
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi
index 709d348cf06..03fd193be25 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi
@@ -466,3 +466,7 @@
 		};
 	};
 };
+
+&tsadc {
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-evb1-v10.dts b/dts/upstream/src/arm64/rockchip/rk3588-evb1-v10.dts
index 7be2190244b..00f660d5012 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-evb1-v10.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-evb1-v10.dts
@@ -878,6 +878,8 @@
 			vdd_cpu_big1_s0: dcdc-reg1 {
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big1_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <12500>;
@@ -890,6 +892,8 @@
 			vdd_cpu_big0_s0: dcdc-reg2 {
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big0_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <12500>;
@@ -902,6 +906,8 @@
 			vdd_cpu_lit_s0: dcdc-reg3 {
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_lit_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <950000>;
 				regulator-ramp-delay = <12500>;
@@ -926,6 +932,8 @@
 			vdd_cpu_big1_mem_s0: dcdc-reg5 {
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big1_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <675000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <12500>;
@@ -939,6 +947,8 @@
 			vdd_cpu_big0_mem_s0: dcdc-reg6 {
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big0_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <675000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <12500>;
@@ -963,6 +973,8 @@
 			vdd_cpu_lit_mem_s0: dcdc-reg8 {
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_lit_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <675000>;
 				regulator-max-microvolt = <950000>;
 				regulator-ramp-delay = <12500>;
@@ -1131,6 +1143,10 @@
 	status = "okay";
 };
 
+&tsadc {
+	status = "okay";
+};
+
 &u2phy0 {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-extra.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-extra.dtsi
index 37101768999..0ce0934ec6b 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-extra.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588-extra.dtsi
@@ -186,6 +186,41 @@
 		};
 	};
 
+	pcie3x4_ep: pcie-ep@fe150000 {
+		compatible = "rockchip,rk3588-pcie-ep";
+		reg = <0xa 0x40000000 0x0 0x00100000>,
+		      <0xa 0x40100000 0x0 0x00100000>,
+		      <0x0 0xfe150000 0x0 0x00010000>,
+		      <0x9 0x00000000 0x0 0x40000000>,
+		      <0xa 0x40300000 0x0 0x00100000>;
+		reg-names = "dbi", "dbi2", "apb", "addr_space", "atu";
+		clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
+			 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
+			 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err",
+				  "dma0", "dma1", "dma2", "dma3";
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
+		reset-names = "pwr", "pipe";
+		status = "disabled";
+	};
+
 	pcie3x2: pcie@fe160000 {
 		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
 		#address-cells = <3>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-ok3588-c.dts b/dts/upstream/src/arm64/rockchip/rk3588-ok3588-c.dts
index 009566d881f..c2a08bdf09e 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-ok3588-c.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-ok3588-c.dts
@@ -261,8 +261,7 @@
 &mdio0 {
 	rgmii_phy0: ethernet-phy@1 {
 		/* RTL8211F */
-		compatible = "ethernet-phy-id001c.c916",
-			     "ethernet-phy-ieee802.3-c22";
+		compatible = "ethernet-phy-id001c.c916";
 		reg = <0x1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rtl8211f_0_rst>;
@@ -275,8 +274,7 @@
 &mdio1 {
 	rgmii_phy1: ethernet-phy@2 {
 		/* RTL8211F */
-		compatible = "ethernet-phy-id001c.c916",
-			     "ethernet-phy-ieee802.3-c22";
+		compatible = "ethernet-phy-id001c.c916";
 		reg = <0x2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rtl8211f_1_rst>;
@@ -376,6 +374,10 @@
 	status = "okay";
 };
 
+&tsadc {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-opp.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-opp.dtsi
new file mode 100644
index 00000000000..0f1a7769735
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-opp.dtsi
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/ {
+	cluster0_opp_table: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <675000 675000 950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <712500 712500 950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <762500 762500 950000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <850000 850000 950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <950000 950000 950000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	cluster1_opp_table: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <675000 675000 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <725000 725000 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <762500 762500 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <850000 850000 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <925000 925000 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-microvolt = <987500 987500 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-microvolt = <1000000 1000000 1000000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	cluster2_opp_table: opp-table-cluster2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <675000 675000 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <725000 725000 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <762500 762500 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <850000 850000 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <925000 925000 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-microvolt = <987500 987500 1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-microvolt = <1000000 1000000 1000000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <675000 675000 850000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <675000 675000 850000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <675000 675000 850000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <675000 675000 850000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <700000 700000 850000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <750000 750000 850000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <800000 800000 850000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <850000 850000 850000>;
+		};
+	};
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp_table>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp_table>;
+};
+
+&cpu_b2 {
+	operating-points-v2 = <&cluster2_opp_table>;
+};
+
+&cpu_b3 {
+	operating-points-v2 = <&cluster2_opp_table>;
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-quartzpro64.dts b/dts/upstream/src/arm64/rockchip/rk3588-quartzpro64.dts
index e80caa36f8e..e4a20cda65e 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-quartzpro64.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-quartzpro64.dts
@@ -833,6 +833,8 @@
 				regulator-name = "vdd_cpu_big1_s0";
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big1_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <12500>;
@@ -846,6 +848,8 @@
 				regulator-name = "vdd_cpu_big0_s0";
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big0_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <12500>;
@@ -859,6 +863,8 @@
 				regulator-name = "vdd_cpu_lit_s0";
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_lit_mem_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <950000>;
 				regulator-ramp-delay = <12500>;
@@ -885,6 +891,8 @@
 				regulator-name = "vdd_cpu_big1_mem_s0";
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big1_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <675000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <12500>;
@@ -899,6 +907,8 @@
 				regulator-name = "vdd_cpu_big0_mem_s0";
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_big0_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <675000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-ramp-delay = <12500>;
@@ -925,6 +935,8 @@
 				regulator-name = "vdd_cpu_lit_mem_s0";
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&vdd_cpu_lit_s0>;
+				regulator-coupled-max-spread = <10000>;
 				regulator-min-microvolt = <675000>;
 				regulator-max-microvolt = <950000>;
 				regulator-ramp-delay = <12500>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-rock-5b-pcie-ep.dtso b/dts/upstream/src/arm64/rockchip/rk3588-rock-5b-pcie-ep.dtso
new file mode 100644
index 00000000000..672d748fcc6
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-rock-5b-pcie-ep.dtso
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * DT-overlay to run the PCIe3_4L Dual Mode controller in Endpoint mode
+ * in the SRNS (Separate Reference Clock No Spread) configuration.
+ *
+ * NOTE: If using a setup with two ROCK 5B:s, with one board running in
+ * RC mode and the other board running in EP mode, see also the device
+ * tree overlay: rk3588-rock-5b-pcie-srns.dtso.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&pcie30phy {
+	rockchip,rx-common-refclk-mode = <0 0 0 0>;
+};
+
+&pcie3x4 {
+	status = "disabled";
+};
+
+&pcie3x4_ep {
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-rock-5b-pcie-srns.dtso b/dts/upstream/src/arm64/rockchip/rk3588-rock-5b-pcie-srns.dtso
new file mode 100644
index 00000000000..1a0f1af65c4
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-rock-5b-pcie-srns.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * DT-overlay to run the PCIe3_4L Dual Mode controller in Root Complex
+ * mode in the SRNS (Separate Reference Clock No Spread) configuration.
+ *
+ * This device tree overlay is only needed (on the RC side) when running
+ * a setup with two ROCK 5B:s, with one board running in RC mode and the
+ * other board running in EP mode.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&pcie30phy {
+	rockchip,rx-common-refclk-mode = <0 0 0 0>;
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-rock-5b.dts b/dts/upstream/src/arm64/rockchip/rk3588-rock-5b.dts
index 2e7512676b7..966bbc582d8 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-rock-5b.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-rock-5b.dts
@@ -52,7 +52,7 @@
 
 	fan: pwm-fan {
 		compatible = "pwm-fan";
-		cooling-levels = <0 95 145 195 255>;
+		cooling-levels = <0 120 150 180 210 240 255>;
 		fan-supply = <&vcc5v0_sys>;
 		pwms = <&pwm1 0 50000 0>;
 		#cooling-cells = <2>;
@@ -65,6 +65,13 @@
 		shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
 	};
 
+	rfkill-bt {
+		compatible = "rfkill-gpio";
+		label = "rfkill-m2-bt";
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+	};
+
 	vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -279,6 +286,36 @@
 	};
 };
 
+&package_thermal {
+	polling-delay = <1000>;
+
+	trips {
+		package_fan0: package-fan0 {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		package_fan1: package-fan1 {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&package_fan0>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map2 {
+			trip = <&package_fan1>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &pcie2x1l0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_0_rst>;
@@ -412,6 +449,20 @@
 	status = "okay";
 };
 
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim2_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
 &uart6 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
@@ -743,6 +794,10 @@
 	};
 };
 
+&tsadc {
+	status = "okay";
+};
+
 &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-toybrick-x0.dts b/dts/upstream/src/arm64/rockchip/rk3588-toybrick-x0.dts
index 9090c5c99f2..d0021524e7f 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-toybrick-x0.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-toybrick-x0.dts
@@ -648,6 +648,10 @@
 	};
 };
 
+&tsadc {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-turing-rk1.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-turing-rk1.dtsi
index 6b9206ce4a0..dbaa94ca69f 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588-turing-rk1.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588-turing-rk1.dtsi
@@ -198,8 +198,7 @@
 &mdio1 {
 	rgmii_phy: ethernet-phy@1 {
 		/* RTL8211F */
-		compatible = "ethernet-phy-id001c.c916",
-			     "ethernet-phy-ieee802.3-c22";
+		compatible = "ethernet-phy-id001c.c916";
 		reg = <0x1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rtl8211f_rst>;
@@ -601,6 +600,10 @@
 	};
 };
 
+&tsadc {
+	status = "okay";
+};
+
 &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
diff --git a/dts/upstream/src/arm64/rockchip/rk3588.dtsi b/dts/upstream/src/arm64/rockchip/rk3588.dtsi
index 0bbeee399a6..7462cc1e100 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588.dtsi
@@ -5,3 +5,4 @@
  */
 
 #include "rk3588-extra.dtsi"
+#include "rk3588-opp.dtsi"
diff --git a/dts/upstream/src/arm64/rockchip/rk3588j.dtsi b/dts/upstream/src/arm64/rockchip/rk3588j.dtsi
index 0bbeee399a6..bce72bac450 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588j.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588j.dtsi
@@ -5,3 +5,144 @@
  */
 
 #include "rk3588-extra.dtsi"
+
+/ {
+	cluster0_opp_table: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <750000 750000 950000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <887500 887500 950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <937500 937500 950000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	cluster1_opp_table: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <750000 750000 950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <787500 787500 950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <875000 875000 950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <950000 950000 950000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	cluster2_opp_table: opp-table-cluster2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <750000 750000 950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <787500 787500 950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <875000 875000 950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <950000 950000 950000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <750000 750000 850000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <750000 750000 850000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <750000 750000 850000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <750000 750000 850000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <750000 750000 850000>;
+		};
+		opp-850000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <787500 787500 850000>;
+		};
+	};
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp_table>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp_table>;
+};
+
+&cpu_b2 {
+	operating-points-v2 = <&cluster2_opp_table>;
+};
+
+&cpu_b3 {
+	operating-points-v2 = <&cluster2_opp_table>;
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts b/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts
index 3b9a349362d..03ed48246d3 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588s-rock-5a.dts
@@ -377,6 +377,19 @@
 	status = "okay";
 };
 
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim0_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
 &spi2 {
 	status = "okay";
 	assigned-clocks = <&cru CLK_SPI2>;
@@ -699,6 +712,10 @@
 	};
 };
 
+&tsadc {
+	status = "okay";
+};
+
 &u2phy0 {
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/rockchip/rk3588s.dtsi b/dts/upstream/src/arm64/rockchip/rk3588s.dtsi
index a379269147c..c7fecf8fe7e 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588s.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588s.dtsi
@@ -5,3 +5,4 @@
  */
 
 #include "rk3588-base.dtsi"
+#include "rk3588-opp.dtsi"
diff --git a/dts/upstream/src/arm64/sprd/ums512.dtsi b/dts/upstream/src/arm64/sprd/ums512.dtsi
index dbdb79f8e95..4c080df4872 100644
--- a/dts/upstream/src/arm64/sprd/ums512.dtsi
+++ b/dts/upstream/src/arm64/sprd/ums512.dtsi
@@ -136,16 +136,22 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>, <&CPU1>, <&CPU2>, <&CPU3>, <&CPU4>, <&CPU5>;
+	};
+
+	pmu-a75 {
+		compatible = "arm,cortex-a75-pmu";
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU6>, <&CPU7>;
 	};
 
 	soc: soc {
diff --git a/dts/upstream/src/arm64/sprd/ums9620.dtsi b/dts/upstream/src/arm64/sprd/ums9620.dtsi
index 2191f0a4811..2458071320c 100644
--- a/dts/upstream/src/arm64/sprd/ums9620.dtsi
+++ b/dts/upstream/src/arm64/sprd/ums9620.dtsi
@@ -144,16 +144,22 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>, <&CPU1>, <&CPU2>, <&CPU3>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU4>, <&CPU5>, <&CPU6>, <&CPU7>;
 	};
 
 	soc: soc {
diff --git a/dts/upstream/src/arm64/st/stm32mp25-pinctrl.dtsi b/dts/upstream/src/arm64/st/stm32mp25-pinctrl.dtsi
index 7a82896dcbf..8fdd5f02042 100644
--- a/dts/upstream/src/arm64/st/stm32mp25-pinctrl.dtsi
+++ b/dts/upstream/src/arm64/st/stm32mp25-pinctrl.dtsi
@@ -6,6 +6,65 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	eth2_rgmii_pins_a: eth2-rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 7, AF10)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('C', 8, AF10)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 9, AF10)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('C', 10, AF10)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('C', 4, AF10)>; /* ETH_RGMII_TX_CTL */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('F', 7, AF10)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('C', 6, AF10)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 5, AF10)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('G', 0, AF10)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 12, AF10)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('C', 11, AF10)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('C', 3, AF10)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+		pins5 {
+			pinmux = <STM32_PINMUX('F', 6, AF10)>; /* ETH_RGMII_RX_CLK */
+			bias-disable;
+		};
+	};
+
+	eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('C', 8, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('F', 8, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 0, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('F', 9, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('C', 3, ANALOG)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('F', 6, ANALOG)>; /* ETH_RGMII_RX_CLK */
+		};
+	};
+
 	i2c2_pins_a: i2c2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('B', 5, AF9)>, /* I2C2_SCL */
@@ -128,6 +187,47 @@
 				 <STM32_PINMUX('A', 8, ANALOG)>; /* USART2_RX */
 		};
 	};
+
+	usart6_pins_a: usart6-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 13, AF3)>, /* USART6_TX */
+				 <STM32_PINMUX('G', 5, AF3)>;  /* USART6_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 14, AF3)>, /* USART6_RX */
+				 <STM32_PINMUX('F', 15, AF3)>; /* USART6_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	usart6_idle_pins_a: usart6-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 13, ANALOG)>, /* USART6_TX */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* USART6_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 5, AF3)>; /* USART6_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('F', 14, AF3)>; /* USART6_RX */
+			bias-pull-up;
+		};
+	};
+
+	usart6_sleep_pins_a: usart6-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 13, ANALOG)>, /* USART6_TX */
+				 <STM32_PINMUX('G', 5, ANALOG)>,  /* USART6_RTS */
+				 <STM32_PINMUX('F', 15, ANALOG)>, /* USART6_CTS_NSS */
+				 <STM32_PINMUX('F', 14, ANALOG)>; /* USART6_RX */
+		};
+	};
 };
 
 &pinctrl_z {
diff --git a/dts/upstream/src/arm64/st/stm32mp251.dtsi b/dts/upstream/src/arm64/st/stm32mp251.dtsi
index dcd0656d67a..1167cf63d7e 100644
--- a/dts/upstream/src/arm64/st/stm32mp251.dtsi
+++ b/dts/upstream/src/arm64/st/stm32mp251.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/st,stm32mp25-rcc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+#include <dt-bindings/regulator/st,stm32mp25-regulator.h>
 
 / {
 	#address-cells = <2>;
@@ -20,6 +21,8 @@
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
 		};
 	};
 
@@ -51,9 +54,11 @@
 	};
 
 	firmware {
-		optee {
+		optee: optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		};
 
 		scmi {
@@ -71,6 +76,40 @@
 				reg = <0x16>;
 				#reset-cells = <1>;
 			};
+
+			scmi_voltd: protocol@17 {
+				reg = <0x17>;
+
+				scmi_regu: regulators {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					scmi_vddio1: regulator@0 {
+						reg = <VOLTD_SCMI_VDDIO1>;
+						regulator-name = "vddio1";
+					};
+					scmi_vddio2: regulator@1 {
+						reg = <VOLTD_SCMI_VDDIO2>;
+						regulator-name = "vddio2";
+					};
+					scmi_vddio3: regulator@2 {
+						reg = <VOLTD_SCMI_VDDIO3>;
+						regulator-name = "vddio3";
+					};
+					scmi_vddio4: regulator@3 {
+						reg = <VOLTD_SCMI_VDDIO4>;
+						regulator-name = "vddio4";
+					};
+					scmi_vdd33ucpd: regulator@5 {
+						reg = <VOLTD_SCMI_UCPD>;
+						regulator-name = "vdd33ucpd";
+					};
+					scmi_vdda18adc: regulator@7 {
+						reg = <VOLTD_SCMI_ADC>;
+						regulator-name = "vdda18adc";
+					};
+				};
+			};
 		};
 	};
 
@@ -88,6 +127,20 @@
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			power-domains = <&RET_PD>;
+		};
+
+		RET_PD: power-domain-retention {
+			#power-domain-cells = <0>;
+		};
 	};
 
 	timer {
@@ -107,6 +160,75 @@
 		interrupt-parent = <&intc>;
 		ranges = <0x0 0x0 0x0 0x80000000>;
 
+		hpdma: dma-controller@40400000 {
+			compatible = "st,stm32mp25-dma3";
+			reg = <0x40400000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk CK_SCMI_HPDMA1>;
+			#dma-cells = <3>;
+		};
+
+		hpdma2: dma-controller@40410000 {
+			compatible = "st,stm32mp25-dma3";
+			reg = <0x40410000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk CK_SCMI_HPDMA2>;
+			#dma-cells = <3>;
+		};
+
+		hpdma3: dma-controller@40420000 {
+			compatible = "st,stm32mp25-dma3";
+			reg = <0x40420000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk CK_SCMI_HPDMA3>;
+			#dma-cells = <3>;
+		};
+
 		rifsc: bus@42080000 {
 			compatible = "st,stm32mp25-rifsc", "simple-bus";
 			reg = <0x42080000 0x1000>;
@@ -148,6 +270,33 @@
 				status = "disabled";
 			};
 
+			usart3: serial@400f0000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x400f0000 0x400>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_USART3>;
+				access-controllers = <&rifsc 33>;
+				status = "disabled";
+			};
+
+			uart4: serial@40100000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40100000 0x400>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_UART4>;
+				access-controllers = <&rifsc 34>;
+				status = "disabled";
+			};
+
+			uart5: serial@40110000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40110000 0x400>;
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_UART5>;
+				access-controllers = <&rifsc 35>;
+				status = "disabled";
+			};
+
 			i2c1: i2c@40120000 {
 				compatible = "st,stm32mp25-i2c";
 				reg = <0x40120000 0x400>;
@@ -239,6 +388,15 @@
 				status = "disabled";
 			};
 
+			usart6: serial@40220000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40220000 0x400>;
+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_USART6>;
+				access-controllers = <&rifsc 36>;
+				status = "disabled";
+			};
+
 			spi1: spi@40230000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -275,6 +433,24 @@
 				status = "disabled";
 			};
 
+			uart9: serial@402c0000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x402c0000 0x400>;
+				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_UART9>;
+				access-controllers = <&rifsc 39>;
+				status = "disabled";
+			};
+
+			usart1: serial@40330000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40330000 0x400>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_USART1>;
+				access-controllers = <&rifsc 31>;
+				status = "disabled";
+			};
+
 			spi6: spi@40350000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -299,6 +475,24 @@
 				status = "disabled";
 			};
 
+			uart7: serial@40370000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40370000 0x400>;
+				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_UART7>;
+				access-controllers = <&rifsc 37>;
+				status = "disabled";
+			};
+
+			uart8: serial@40380000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x40380000 0x400>;
+				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_UART8>;
+				access-controllers = <&rifsc 38>;
+				status = "disabled";
+			};
+
 			spi8: spi@46020000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -338,6 +532,55 @@
 				access-controllers = <&rifsc 76>;
 				status = "disabled";
 			};
+
+			ethernet1: ethernet@482c0000 {
+				compatible = "st,stm32mp25-dwmac", "snps,dwmac-5.20";
+				reg = <0x482c0000 0x4000>;
+				reg-names = "stmmaceth";
+				interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq";
+				clock-names = "stmmaceth",
+					      "mac-clk-tx",
+					      "mac-clk-rx",
+					      "ptp_ref",
+					      "ethstp",
+					      "eth-ck";
+				clocks = <&rcc CK_ETH1_MAC>,
+					 <&rcc CK_ETH1_TX>,
+					 <&rcc CK_ETH1_RX>,
+					 <&rcc CK_KER_ETH1PTP>,
+					 <&rcc CK_ETH1_STP>,
+					 <&rcc CK_KER_ETH1>;
+				snps,axi-config = <&stmmac_axi_config_1>;
+				snps,mixed-burst;
+				snps,mtl-rx-config = <&mtl_rx_setup_1>;
+				snps,mtl-tx-config = <&mtl_tx_setup_1>;
+				snps,pbl = <2>;
+				snps,tso;
+				st,syscon = <&syscfg 0x3000>;
+				access-controllers = <&rifsc 60>;
+				status = "disabled";
+
+				mtl_rx_setup_1: rx-queues-config {
+					snps,rx-queues-to-use = <2>;
+					queue0 {};
+					queue1 {};
+				};
+
+				mtl_tx_setup_1: tx-queues-config {
+					snps,tx-queues-to-use = <4>;
+					queue0 {};
+					queue1 {};
+					queue2 {};
+					queue3 {};
+				};
+
+				stmmac_axi_config_1: stmmac-axi-config {
+					snps,blen = <0 0 0 0 16 8 4>;
+					snps,rd_osr_lmt = <0x7>;
+					snps,wr_osr_lmt = <0x7>;
+				};
+			};
 		};
 
 		bsec: efuse@44000000 {
@@ -441,6 +684,7 @@
 				<&scmi_clk CK_SCMI_TIMG2>,
 				<&scmi_clk CK_SCMI_PLL3>,
 				<&clk_dsi_txbyte>;
+				access-controllers = <&rifsc 156>;
 		};
 
 		exti1: interrupt-controller@44220000 {
diff --git a/dts/upstream/src/arm64/st/stm32mp253.dtsi b/dts/upstream/src/arm64/st/stm32mp253.dtsi
index 029f8898196..eeceb086252 100644
--- a/dts/upstream/src/arm64/st/stm32mp253.dtsi
+++ b/dts/upstream/src/arm64/st/stm32mp253.dtsi
@@ -12,6 +12,8 @@
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
 		};
 	};
 
@@ -21,6 +23,13 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
+	psci {
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+		};
+	};
+
 	timer {
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -28,3 +37,58 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
+
+&optee {
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
+&rifsc {
+	ethernet2: ethernet@482d0000 {
+		compatible = "st,stm32mp25-dwmac", "snps,dwmac-5.20";
+		reg = <0x482d0000 0x4000>;
+		reg-names = "stmmaceth";
+		interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clock-names = "stmmaceth",
+			      "mac-clk-tx",
+			      "mac-clk-rx",
+			      "ptp_ref",
+			      "ethstp",
+			      "eth-ck";
+		clocks = <&rcc CK_ETH2_MAC>,
+			 <&rcc CK_ETH2_TX>,
+			 <&rcc CK_ETH2_RX>,
+			 <&rcc CK_KER_ETH2PTP>,
+			 <&rcc CK_ETH2_STP>,
+			 <&rcc CK_KER_ETH2>;
+		snps,axi-config = <&stmmac_axi_config_2>;
+		snps,mixed-burst;
+		snps,mtl-rx-config = <&mtl_rx_setup_2>;
+		snps,mtl-tx-config = <&mtl_tx_setup_2>;
+		snps,pbl = <2>;
+		snps,tso;
+		st,syscon = <&syscfg 0x3400>;
+		access-controllers = <&rifsc 61>;
+		status = "disabled";
+
+		mtl_rx_setup_2: rx-queues-config {
+			snps,rx-queues-to-use = <2>;
+			queue0 {};
+			queue1 {};
+		};
+
+		mtl_tx_setup_2: tx-queues-config {
+			snps,tx-queues-to-use = <4>;
+			queue0 {};
+			queue1 {};
+			queue2 {};
+			queue3 {};
+		};
+
+		stmmac_axi_config_2: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,rd_osr_lmt = <0x7>;
+			snps,wr_osr_lmt = <0x7>;
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/st/stm32mp257f-ev1.dts b/dts/upstream/src/arm64/st/stm32mp257f-ev1.dts
index 27b7360e5db..214191a8322 100644
--- a/dts/upstream/src/arm64/st/stm32mp257f-ev1.dts
+++ b/dts/upstream/src/arm64/st/stm32mp257f-ev1.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/st,stm32mp25-regulator.h>
 #include "stm32mp257.dtsi"
 #include "stm32mp25xf.dtsi"
 #include "stm32mp25-pinctrl.dtsi"
@@ -17,7 +18,9 @@
 	compatible = "st,stm32mp257f-ev1", "st,stm32mp257";
 
 	aliases {
+		ethernet0 = &ethernet2;
 		serial0 = &usart2;
+		serial1 = &usart6;
 	};
 
 	chosen {
@@ -40,14 +43,6 @@
 			no-map;
 		};
 	};
-
-	vdd_sdcard: vdd-sdcard {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_sdcard";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
 };
 
 &arm_wdt {
@@ -55,6 +50,29 @@
 	status = "okay";
 };
 
+&ethernet2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth2_rgmii_pins_a>;
+	pinctrl-1 = <&eth2_rgmii_sleep_pins_a>;
+	max-speed = <1000>;
+	phy-handle = <&phy0_eth2>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0_eth2: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <1>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+			reset-gpios =  <&gpiog 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
 &i2c2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -75,6 +93,37 @@
 	status = "disabled";
 };
 
+&scmi_regu {
+	scmi_vddio1: regulator@0 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+	scmi_vddcore: regulator@11  {
+		reg = <VOLTD_SCMI_STPMIC2_BUCK2>;
+		regulator-name = "vddcore";
+	};
+	scmi_v1v8: regulator@14  {
+		reg = <VOLTD_SCMI_STPMIC2_BUCK5>;
+		regulator-name = "v1v8";
+	};
+	scmi_v3v3: regulator@16 {
+		reg = <VOLTD_SCMI_STPMIC2_BUCK7>;
+		regulator-name = "v3v3";
+	};
+	scmi_vdd_emmc: regulator@18 {
+		reg = <VOLTD_SCMI_STPMIC2_LDO2>;
+		regulator-name = "vdd_emmc";
+	};
+	scmi_vdd3v3_usb: regulator@20 {
+		reg = <VOLTD_SCMI_STPMIC2_LDO4>;
+		regulator-name = "vdd3v3_usb";
+	};
+	scmi_vdd_sdcard: regulator@23 {
+		reg = <VOLTD_SCMI_STPMIC2_LDO7>;
+		regulator-name = "vdd_sdcard";
+	};
+};
+
 &sdmmc1 {
 	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
@@ -84,7 +133,8 @@
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
-	vmmc-supply = <&vdd_sdcard>;
+	vmmc-supply = <&scmi_vdd_sdcard>;
+	vqmmc-supply = <&scmi_vddio1>;
 	status = "okay";
 };
 
@@ -109,3 +159,12 @@
 	pinctrl-2 = <&usart2_sleep_pins_a>;
 	status = "okay";
 };
+
+&usart6 {
+	pinctrl-names = "default", "idle", "sleep";
+	pinctrl-0 = <&usart6_pins_a>;
+	pinctrl-1 = <&usart6_idle_pins_a>;
+	pinctrl-2 = <&usart6_sleep_pins_a>;
+	uart-has-rtscts;
+	status = "disabled";
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am62-lp-sk-nand.dtso b/dts/upstream/src/arm64/ti/k3-am62-lp-sk-nand.dtso
new file mode 100644
index 00000000000..173ac60723b
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am62-lp-sk-nand.dtso
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "k3-pinctrl.h"
+
+&mcasp1 {
+	status = "disabled";
+};
+
+&main_pmx0 {
+	gpmc0_pins_default: gpmc0-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x003c, PIN_INPUT, 0) /* (K19) GPMC0_AD0 */
+			AM62X_IOPAD(0x0040, PIN_INPUT, 0) /* (L19) GPMC0_AD1 */
+			AM62X_IOPAD(0x0044, PIN_INPUT, 0) /* (L20) GPMC0_AD2 */
+			AM62X_IOPAD(0x0048, PIN_INPUT, 0) /* (L21) GPMC0_AD3 */
+			AM62X_IOPAD(0x004c, PIN_INPUT, 0) /* (M21) GPMC0_AD4 */
+			AM62X_IOPAD(0x0050, PIN_INPUT, 0) /* (L17) GPMC0_AD5 */
+			AM62X_IOPAD(0x0054, PIN_INPUT, 0) /* (L18) GPMC0_AD6 */
+			AM62X_IOPAD(0x0058, PIN_INPUT, 0) /* (M20) GPMC0_AD7 */
+			AM62X_IOPAD(0x0098, PIN_INPUT, 0) /* (P21) GPMC0_WAIT0 */
+			AM62X_IOPAD(0x00a8, PIN_OUTPUT, 0) /* (J18) GPMC0_CSn0 */
+			AM62X_IOPAD(0x0084, PIN_OUTPUT, 0) /* (K20) GPMC0_ADVn_ALE */
+			AM62X_IOPAD(0x0088, PIN_OUTPUT, 0) /* (K21) GPMC0_OEn_REn */
+			AM62X_IOPAD(0x008c, PIN_OUTPUT, 0) /* (J17) GPMC0_WEn */
+			AM62X_IOPAD(0x0090, PIN_OUTPUT, 0) /* (K17) GPMC0_BE0n_CLE */
+			AM62X_IOPAD(0x00a0, PIN_OUTPUT, 0) /* (J20) GPMC0_WPn */
+		>;
+	};
+};
+
+&elm0 {
+	status = "okay";
+};
+
+&gpmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc0_pins_default>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	nand@0,0 {
+		compatible = "ti,am64-nand";
+		reg = <0 0 64>;		/* device IO registers */
+		interrupt-parent = <&gpmc0>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc0 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-polled";
+		ti,nand-ecc-opt = "bch8";	/* BCH8: Bootrom limitation */
+		ti,elm-id = <&elm0>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <25>;
+		gpmc,adv-wr-off-ns = <25>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <3>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "NAND.tiboot3";
+				reg = <0x00000000 0x00200000>;	/* 2M */
+			};
+			partition@200000 {
+				label = "NAND.tispl";
+				reg = <0x00200000 0x00200000>;	/* 2M */
+			};
+			partition@400000 {
+				label = "NAND.tiboot3.backup";	/* 2M */
+				reg = <0x00400000 0x00200000>;	/* BootROM looks at 4M */
+			};
+			partition@600000 {
+				label = "NAND.u-boot";
+				reg = <0x00600000 0x00400000>;	/* 4M */
+			};
+			partition@a00000 {
+				label = "NAND.u-boot-env";
+				reg = <0x00a00000 0x00040000>;	/* 256K */
+			};
+			partition@a40000 {
+				label = "NAND.u-boot-env.backup";
+				reg = <0x00a40000 0x00040000>;	/* 256K */
+			};
+			partition@a80000 {
+				label = "NAND.file-system";
+				reg = <0x00a80000 0x3f580000>;
+			};
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts b/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts
index 9a17bd3e59c..8e9fc00a6b3 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts
@@ -228,3 +228,7 @@
 &tlv320aic3106 {
 	DVDD-supply = <&buck2_reg>;
 };
+
+&gpmc0 {
+	ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am62-main.dtsi b/dts/upstream/src/arm64/ti/k3-am62-main.dtsi
index 448a59dc53a..328929c740d 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-main.dtsi
@@ -141,8 +141,8 @@
 			compatible = "ti,am64-dmss-pktdma";
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
-			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x4aa00000 0x00 0x20000>,
+			      <0x00 0x4b800000 0x00 0x200000>,
 			      <0x00 0x485e0000 0x00 0x10000>,
 			      <0x00 0x484a0000 0x00 0x2000>,
 			      <0x00 0x484c0000 0x00 0x2000>,
@@ -207,10 +207,6 @@
 	crypto: crypto@40900000 {
 		compatible = "ti,am62-sa3ul";
 		reg = <0x00 0x40900000 0x00 0x1200>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
-
 		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
 		       <&main_pktdma 0x7507 0>;
 		dma-names = "tx", "rx1", "rx2";
@@ -739,7 +735,7 @@
 				label = "port1";
 				phys = <&phy_gmii_sel 1>;
 				mac-address = [00 00 00 00 00 00];
-				ti,syscon-efuse = <&wkup_conf 0x200>;
+				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
 			};
 
 			cpsw_port2: port@2 {
@@ -1057,4 +1053,33 @@
 		status = "disabled";
 	};
 
+	gpmc0: memory-controller@3b000000 {
+		compatible = "ti,am64-gpmc";
+		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 80 0>;
+		clock-names = "fck";
+		reg = <0x00 0x03b000000 0x00 0x400>,
+		      <0x00 0x050000000 0x00 0x8000000>;
+		reg-names = "cfg", "data";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		gpmc,num-cs = <3>;
+		gpmc,num-waitpins = <2>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "disabled";
+	};
+
+	elm0: ecc@25010000 {
+		compatible = "ti,am64-elm";
+		reg = <0x00 0x25010000 0x00 0x2000>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 54 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
 };
diff --git a/dts/upstream/src/arm64/ti/k3-am62-verdin-dahlia.dtsi b/dts/upstream/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
index e8f4d136e5d..9202181fbd6 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
@@ -43,15 +43,6 @@
 			sound-dai = <&mcasp0>;
 		};
 	};
-
-	reg_usb_hub: regulator-usb-hub {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
-		regulator-boot-on;
-		regulator-name = "HUB_PWR_EN";
-	};
 };
 
 /* Verdin ETHs */
@@ -193,11 +184,6 @@
 	status = "okay";
 };
 
-/* Do not force CTRL_SLEEP_MOCI# always enabled */
-&reg_force_sleep_moci {
-	status = "disabled";
-};
-
 /* Verdin SD_1 */
 &sdhci1 {
 	status = "okay";
@@ -218,15 +204,7 @@
 };
 
 &usb1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	status = "okay";
-
-	usb-hub@1 {
-		compatible = "usb424,2744";
-		reg = <1>;
-		vdd-supply = <&reg_usb_hub>;
-	};
 };
 
 /* Verdin CTRL_WAKE1_MICO# */
diff --git a/dts/upstream/src/arm64/ti/k3-am62-verdin-dev.dtsi b/dts/upstream/src/arm64/ti/k3-am62-verdin-dev.dtsi
index 74eec1a1abc..5c1284b802a 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-verdin-dev.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-verdin-dev.dtsi
@@ -14,6 +14,7 @@
 		simple-audio-card,bitclock-master = <&codec_dai>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,name = "verdin-nau8822";
 		simple-audio-card,routing =
 			"Headphones", "LHP",
@@ -34,7 +35,6 @@
 			"Line", "Line In";
 
 		codec_dai: simple-audio-card,codec {
-			clocks = <&audio_refclk1>;
 			sound-dai = <&nau8822_1a>;
 		};
 
@@ -107,6 +107,8 @@
 		reg = <0x1a>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2s1_mclk>;
+		clock-names = "mclk";
+		clocks = <&audio_refclk1>;
 		#sound-dai-cells = <0>;
 	};
 
diff --git a/dts/upstream/src/arm64/ti/k3-am62-verdin.dtsi b/dts/upstream/src/arm64/ti/k3-am62-verdin.dtsi
index 2038c5e0463..5bef31b8577 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-verdin.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-verdin.dtsi
@@ -138,12 +138,6 @@
 		vin-supply = <&reg_1v8>;
 	};
 
-	/*
-	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
-	 * peripherals on the carrier board powered.
-	 * If more granularity or power saving is required this can be disabled
-	 * in the carrier board device tree files.
-	 */
 	reg_force_sleep_moci: regulator-force-sleep-moci {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -1364,8 +1358,6 @@
 	       0 0 0 0
 	>;
 	tdm-slots = <2>;
-	rx-num-evt = <32>;
-	tx-num-evt = <32>;
 	#sound-dai-cells = <0>;
 	status = "disabled";
 };
@@ -1382,8 +1374,6 @@
 	       0 0 0 0
 	>;
 	tdm-slots = <2>;
-	rx-num-evt = <32>;
-	tx-num-evt = <32>;
 	#sound-dai-cells = <0>;
 	status = "disabled";
 };
diff --git a/dts/upstream/src/arm64/ti/k3-am62-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-am62-wakeup.dtsi
index 66ddf2dc51a..e0afafd532a 100644
--- a/dts/upstream/src/arm64/ti/k3-am62-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62-wakeup.dtsi
@@ -22,6 +22,11 @@
 			reg = <0x14 0x4>;
 		};
 
+		cpsw_mac_syscon: ethernet-mac-syscon@200 {
+			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
+			reg = <0x200 0x8>;
+		};
+
 		usb0_phy_ctrl: syscon@4008 {
 			compatible = "ti,am62-usb-phy-ctrl", "syscon";
 			reg = <0x4008 0x4>;
diff --git a/dts/upstream/src/arm64/ti/k3-am62.dtsi b/dts/upstream/src/arm64/ti/k3-am62.dtsi
index f0781f2bea2..bfb55ca1132 100644
--- a/dts/upstream/src/arm64/ti/k3-am62.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62.dtsi
@@ -68,11 +68,13 @@
 			 <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
 			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
 			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
+			 <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */
 			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
 			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
 			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
 			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
 			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC0 DATA */
 			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
 			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
diff --git a/dts/upstream/src/arm64/ti/k3-am625-beagleplay.dts b/dts/upstream/src/arm64/ti/k3-am625-beagleplay.dts
index 18e3070a868..70de288d728 100644
--- a/dts/upstream/src/arm64/ti/k3-am625-beagleplay.dts
+++ b/dts/upstream/src/arm64/ti/k3-am625-beagleplay.dts
@@ -924,6 +924,4 @@
 	       0 0 0 0
 	       0 0 0 0
 	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
 };
diff --git a/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso b/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso
new file mode 100644
index 00000000000..6ec6d57ec49
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&vdd_core {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <850000>;
+};
+
+&a53_opp_table {
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+	};
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts b/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
index 50d2573c840..4fa5efdffcd 100644
--- a/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -7,477 +7,12 @@
  * https://www.phytec.com/product/phyboard-am62x
  */
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/net/ti-dp83867.h>
 #include "k3-am625.dtsi"
 #include "k3-am62-phycore-som.dtsi"
+#include "k3-am62x-phyboard-lyra.dtsi"
 
 / {
 	compatible = "phytec,am625-phyboard-lyra-rdk",
 		     "phytec,am62-phycore-som", "ti,am625";
 	model = "PHYTEC phyBOARD-Lyra AM625";
-
-	aliases {
-		serial2 = &main_uart0;
-		serial3 = &main_uart1;
-		mmc1 = &sdhci1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		ethernet1 = &cpsw_port2;
-	};
-
-	can_tc1: can-phy0 {
-		compatible = "ti,tcan1042";
-		#phy-cells = <0>;
-		max-bitrate = <8000000>;
-		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	hdmi0: connector-hdmi {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&sii9022_out>;
-			};
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pins_default>;
-
-		key-home {
-			label = "home";
-			linux,code = <KEY_HOME>;
-			gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>;
-		};
-
-		key-menu {
-			label = "menu";
-			linux,code = <KEY_MENU>;
-			gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "phyBOARD-Lyra";
-		simple-audio-card,widgets =
-			"Microphone",           "Mic Jack",
-			"Headphone",            "Headphone Jack",
-			"Speaker",              "External Speaker";
-		simple-audio-card,routing =
-			"MIC3R",                "Mic Jack",
-			"Mic Jack",             "Mic Bias",
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT",
-			"External Speaker",     "SPOP",
-			"External Speaker",     "SPOM";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp2>;
-		};
-
-		sound_master: simple-audio-card,codec {
-				sound-dai = <&audio_codec>;
-				clocks = <&audio_refclk1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
-
-		led-1 {
-			gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-
-		led-2 {
-			gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-		};
-	};
-
-	vcc_1v8: regulator-vcc-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_3v3_mmc: regulator-vcc-3v3-mmc {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3_MMC";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_3v3_sw: regulator-vcc-3v3-sw {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3_SW";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&main_pmx0 {
-	audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
-		>;
-	};
-
-	gpio_keys_pins_default: gpio-keys-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
-		>;
-	};
-
-	gpio_exp_int_pins_default: gpio-exp-int-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
-		>;
-	};
-
-	hdmi_int_pins_default: hdmi-int-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
-		>;
-	};
-
-	main_dss0_pins_default: main-dss0-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
-			AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
-			AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
-			AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
-			AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
-			AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
-			AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
-			AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
-			AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
-			AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
-			AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
-			AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
-			AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
-			AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
-			AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
-			AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
-			AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
-			AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
-			AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
-			AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
-		>;
-	};
-
-	main_i2c1_pins_default: main-i2c1-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
-			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
-		>;
-	};
-
-	main_mcan0_pins_default: main-mcan0-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */
-			AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */
-		>;
-	};
-
-	main_mcasp2_pins_default: main-mcasp2-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */
-			AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */
-			AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */
-			AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */
-		>;
-	};
-
-	main_mmc1_pins_default: main-mmc1-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */
-			AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */
-			AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */
-			AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */
-			AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */
-			AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */
-			AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */
-		>;
-	};
-
-	main_rgmii2_pins_default: main-rgmii2-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
-			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
-			AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
-			AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
-			AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
-			AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
-			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
-			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
-			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
-			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
-			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
-			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
-		>;
-	};
-
-	main_uart0_pins_default: main-uart0-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
-			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
-		>;
-	};
-
-	main_uart1_pins_default: main-uart1-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */
-			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */
-			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
-			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
-		>;
-	};
-
-	main_usb1_pins_default: main-usb1-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
-		>;
-	};
-
-	user_leds_pins_default: user-leds-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */
-		>;
-	};
-};
-
-&cpsw3g {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-rxid";
-	phy-handle = <&cpsw3g_phy3>;
-};
-
-&cpsw3g_mdio {
-	cpsw3g_phy3: ethernet-phy@3 {
-		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
-		reg = <3>;
-		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-	};
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_dss0_pins_default>;
-	status = "okay";
-};
-
-&dss_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/* VP2: DPI/HDMI Output */
-	port@1 {
-		reg = <1>;
-
-		dpi1_out: endpoint {
-			remote-endpoint = <&sii9022_in>;
-		};
-	};
-};
-
-&main_i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_i2c1_pins_default>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	audio_codec: audio-codec@18 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&audio_ext_refclk1_pins_default>;
-
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3007";
-		reg = <0x18>;
-		ai3x-micbias-vg = <2>;
-
-		AVDD-supply = <&vcc_3v3_sw>;
-		IOVDD-supply = <&vcc_3v3_sw>;
-		DRVDD-supply = <&vcc_3v3_sw>;
-		DVDD-supply = <&vcc_1v8>;
-	};
-
-	gpio_exp: gpio-expander@21 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_exp_int_pins_default>;
-		compatible = "nxp,pcf8574";
-		reg = <0x21>;
-		interrupt-parent = <&main_gpio1>;
-		interrupts = <49 0>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-line-names = "", "GPIO1_CAN0_nEN",
-				  "GPIO2_LED2", "GPIO3_LVDS_GPIO",
-				  "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
-				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
-	};
-
-	usb-pd@22 {
-		compatible = "ti,tps6598x";
-		reg = <0x22>;
-
-		connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			self-powered;
-			data-role = "dual";
-			power-role = "sink";
-			port {
-				usb_con_hs: endpoint {
-					remote-endpoint = <&typec_hs>;
-				};
-			};
-		};
-	};
-
-	sii9022: bridge-hdmi@39 {
-		compatible = "sil,sii9022";
-		reg = <0x39>;
-
-		interrupt-parent = <&main_gpio0>;
-		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_int_pins_default>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				sii9022_in: endpoint {
-					remote-endpoint = <&dpi1_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				sii9022_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c02";
-		pagesize = <16>;
-		reg = <0x51>;
-	};
-};
-
-&main_mcan0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mcan0_pins_default>;
-	phys = <&can_tc1>;
-	status = "okay";
-};
-
-&main_uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_uart0_pins_default>;
-	status = "okay";
-};
-
-&main_uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_uart1_pins_default>;
-	/* Main UART1 may be used by TIFS firmware */
-	status = "okay";
-};
-
-&mcasp2 {
-	#sound-dai-cells = <0>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mcasp2_pins_default>;
-
-	/* MCASP_IIS_MODE */
-	op-mode = <0>;
-	tdm-slots = <2>;
-
-	/* 0: INACTIVE, 1: TX, 2: RX */
-	serial-dir = <
-			0 0 1 2
-			0 0 0 0
-			0 0 0 0
-			0 0 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-	status = "okay";
-};
-
-&sdhci1 {
-	vmmc-supply = <&vcc_3v3_mmc>;
-	vqmmc-supply = <&vddshv5_sdio>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mmc1_pins_default>;
-	disable-wp;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usbss0 {
-	ti,vbus-divider;
-	status = "okay";
-};
-
-&usbss1 {
-	ti,vbus-divider;
-	status = "okay";
-};
-
-&usb0 {
-	usb-role-switch;
-
-	port {
-		typec_hs: endpoint {
-			remote-endpoint = <&usb_con_hs>;
-		};
-	};
-};
-
-&usb1 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_usb1_pins_default>;
 };
diff --git a/dts/upstream/src/arm64/ti/k3-am62a-main.dtsi b/dts/upstream/src/arm64/ti/k3-am62a-main.dtsi
index bf9c2d9c643..916fcf3cc57 100644
--- a/dts/upstream/src/arm64/ti/k3-am62a-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62a-main.dtsi
@@ -59,6 +59,24 @@
 			reg = <0x4130 0x4>;
 			#clock-cells = <1>;
 		};
+
+		audio_refclk0: clock-controller@82e0 {
+			compatible = "ti,am62-audio-refclk";
+			reg = <0x82e0 0x4>;
+			clocks = <&k3_clks 157 0>;
+			assigned-clocks = <&k3_clks 157 0>;
+			assigned-clock-parents = <&k3_clks 157 8>;
+			#clock-cells = <0>;
+		};
+
+		audio_refclk1: clock-controller@82e4 {
+			compatible = "ti,am62-audio-refclk";
+			reg = <0x82e4 0x4>;
+			clocks = <&k3_clks 157 10>;
+			assigned-clocks = <&k3_clks 157 10>;
+			assigned-clock-parents = <&k3_clks 157 18>;
+			#clock-cells = <0>;
+		};
 	};
 
 	dmss: bus@48000000 {
@@ -120,8 +138,8 @@
 			compatible = "ti,am64-dmss-pktdma";
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
-			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x4aa00000 0x00 0x20000>,
+			      <0x00 0x4b800000 0x00 0x200000>,
 			      <0x00 0x485e0000 0x00 0x10000>,
 			      <0x00 0x484a0000 0x00 0x2000>,
 			      <0x00 0x484c0000 0x00 0x2000>,
@@ -216,6 +234,14 @@
 		};
 	};
 
+	crypto: crypto@40900000 {
+		compatible = "ti,am62-sa3ul";
+		reg = <0x00 0x40900000 0x00 0x1200>;
+		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
+		       <&main_pktdma 0x7507 0>;
+		dma-names = "tx", "rx1", "rx2";
+	};
+
 	secure_proxy_sa3: mailbox@43600000 {
 		compatible = "ti,am654-secure-proxy";
 		#mbox-cells = <1>;
@@ -713,7 +739,7 @@
 				label = "port1";
 				phys = <&phy_gmii_sel 1>;
 				mac-address = [00 00 00 00 00 00];
-				ti,syscon-efuse = <&wkup_conf 0x200>;
+				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
 			};
 
 			cpsw_port2: port@2 {
diff --git a/dts/upstream/src/arm64/ti/k3-am62a-phycore-som.dtsi b/dts/upstream/src/arm64/ti/k3-am62a-phycore-som.dtsi
new file mode 100644
index 00000000000..a5aceaa3967
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am62a-phycore-som.dtsi
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023 - 2024 PHYTEC America LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ *
+ * Product homepage:
+ * https://www.phytec.com/product/phycore-am62a
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "PHYTEC phyCORE-AM62Ax";
+	compatible = "phytec,am62a-phycore-som", "ti,am62a7";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		gpio0 = &main_gpio0;
+		gpio1 = &main_gpio1;
+		i2c0 = &main_i2c0;
+		mmc0 = &sdhci0;
+		rtc0 = &i2c_som_rtc;
+		spi0 = &ospi0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global cma region */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00 0x24000000>;
+			alloc-ranges = <0x00 0xc0000000 0x00 0x24000000>;
+			linux,cma-default;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x01e00000>;
+			no-map;
+		};
+	};
+
+	vcc_5v0_som: regulator-vcc-5v0-som {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0_SOM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+	leds_pins_default: leds-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x034, PIN_OUTPUT, 7) /* (K20) OSPI0_CSN2.GPIO0_13 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */
+			AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */
+		>;
+	};
+
+	main_mdio1_pins_default: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
+			AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */
+			AM62AX_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB7) MMC0_CLK */
+			AM62AX_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */
+			AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */
+			AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */
+			AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */
+			AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */
+			AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */
+			AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */
+			AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */
+		>;
+	};
+
+	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */
+			AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */
+			AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */
+			AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */
+			AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */
+			AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */
+			AM62AX_IOPAD(0x134, PIN_OUTPUT, 0) /* (Y17) RGMII1_TD0 */
+			AM62AX_IOPAD(0x138, PIN_OUTPUT, 0) /* (V16) RGMII1_TD1 */
+			AM62AX_IOPAD(0x13c, PIN_OUTPUT, 0) /* (Y16) RGMII1_TD2 */
+			AM62AX_IOPAD(0x140, PIN_OUTPUT, 0) /* (AA17) RGMII1_TD3 */
+			AM62AX_IOPAD(0x130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */
+			AM62AX_IOPAD(0x12c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x000, PIN_OUTPUT, 0) /* (L22) OSPI0_CLK */
+			AM62AX_IOPAD(0x02c, PIN_OUTPUT, 0) /* (H21) OSPI0_CSn0 */
+			AM62AX_IOPAD(0x038, PIN_OUTPUT, 0) /* (G20) OSPI0_CSn3 */
+			AM62AX_IOPAD(0x00c, PIN_INPUT, 0) /* (J21) OSPI0_D0 */
+			AM62AX_IOPAD(0x010, PIN_INPUT, 0) /* (J18) OSPI0_D1 */
+			AM62AX_IOPAD(0x014, PIN_INPUT, 0) /* (J19) OSPI0_D2 */
+			AM62AX_IOPAD(0x018, PIN_INPUT, 0) /* (H18) OSPI0_D3 */
+			AM62AX_IOPAD(0x01c, PIN_INPUT, 0) /* (K21) OSPI0_D4 */
+			AM62AX_IOPAD(0x020, PIN_INPUT, 0) /* (H19) OSPI0_D5 */
+			AM62AX_IOPAD(0x024, PIN_INPUT, 0) /* (J20) OSPI0_D6 */
+			AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+			AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) EXTINTn */
+		>;
+	};
+};
+
+&cpsw3g {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+
+	cpsw3g_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&fss {
+	status = "okay";
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vcc_5v0_som>;
+		buck2-supply = <&vcc_5v0_som>;
+		buck3-supply = <&vcc_5v0_som>;
+		ldo1-supply = <&vdd_3v3>;
+		ldo2-supply = <&vdd_1v8>;
+		ldo3-supply = <&vcc_5v0_som>;
+		ldo4-supply = <&vcc_5v0_som>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		ti,power-button;
+		system-power-controller;
+
+		regulators {
+			vdd_3v3: buck1 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_1v8: buck2 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_lpddr4: buck3 {
+				regulator-name = "VDD_LPDDR4";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddshv5_sdio: ldo1 {
+				regulator-name = "VDDSHV5_SDIO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allow-bypass;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddr_core: ldo2 {
+				regulator-name = "VDDR_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdda_1v8: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_2v5: ldo4 {
+				regulator-name = "VDD_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	i2c_som_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&main_gpio1 {
+	status = "okay";
+};
+
+&main_gpio_intr {
+	status = "okay";
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+	status = "okay";
+
+	serial_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	disable-wp;
+	non-removable;
+	status = "okay";
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am62a-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-am62a-wakeup.dtsi
index 98043e9aa31..f5ac101a04d 100644
--- a/dts/upstream/src/arm64/ti/k3-am62a-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62a-wakeup.dtsi
@@ -6,9 +6,8 @@
  */
 
 &cbass_wakeup {
-	wkup_conf: syscon@43000000 {
-		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
-		reg = <0x00 0x43000000 0x00 0x20000>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x43000000 0x20000>;
@@ -18,6 +17,11 @@
 			reg = <0x14 0x4>;
 		};
 
+		cpsw_mac_syscon: ethernet-mac-syscon@200 {
+			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
+			reg = <0x200 0x8>;
+		};
+
 		usb0_phy_ctrl: syscon@4008 {
 			compatible = "ti,am62-usb-phy-ctrl", "syscon";
 			reg = <0x4008 0x4>;
@@ -59,7 +63,6 @@
 		clock-names = "vbus", "osc32k";
 		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
 		wakeup-source;
-		status = "disabled";
 	};
 
 	wkup_rti0: watchdog@2b000000 {
diff --git a/dts/upstream/src/arm64/ti/k3-am62a7-phyboard-lyra-rdk.dts b/dts/upstream/src/arm64/ti/k3-am62a7-phyboard-lyra-rdk.dts
new file mode 100644
index 00000000000..3b93409b23e
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am62a7-phyboard-lyra-rdk.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023 - 2024 PHYTEC America LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ *
+ * Product homepage:
+ * https://www.phytec.com/product/phyboard-am62a
+ */
+
+#include "k3-am62a7.dtsi"
+#include "k3-am62a-phycore-som.dtsi"
+#include "k3-am62x-phyboard-lyra.dtsi"
+
+/ {
+	compatible = "phytec,am62a7-phyboard-lyra-rdk",
+		     "phytec,am62a-phycore-som", "ti,am62a7";
+	model = "PHYTEC phyBOARD-Lyra AM62A7";
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts b/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts
index fa43cd0b631..67faf46d7a3 100644
--- a/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts
@@ -40,6 +40,15 @@
 		#size-cells = <2>;
 		ranges;
 
+		/* global cma region */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00 0x24000000>;
+			alloc-ranges = <0x00 0xc0000000 0x00 0x24000000>;
+			linux,cma-default;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -701,8 +710,6 @@
 	       0 0 0 0
 	       0 0 0 0
 	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
 };
 
 &dss {
diff --git a/dts/upstream/src/arm64/ti/k3-am62p-j722s-common-main.dtsi b/dts/upstream/src/arm64/ti/k3-am62p-j722s-common-main.dtsi
new file mode 100644
index 00000000000..9701fc69aed
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am62p-j722s-common-main.dtsi
@@ -0,0 +1,1062 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree file for the MAIN domain peripherals shared by AM62P and J722S
+ *
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	oc_sram: sram@70000000 {
+		compatible = "mmio-sram";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_conf: bus@100000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x00100000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x20000>;
+
+		phy_gmii_sel: phy@4044 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4044 0x8>;
+			#phy-cells = <1>;
+		};
+
+		epwm_tbclk: clock-controller@4130 {
+			compatible = "ti,am62-epwm-tbclk";
+			reg = <0x4130 0x4>;
+			#clock-cells = <1>;
+		};
+	};
+
+	dmss: bus@48000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
+		bootph-all;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			bootph-all;
+		};
+
+		inta_main_dmss: interrupt-controller@48000000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x48000000 0x00 0x100000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <28>;
+			ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
+		};
+
+		main_bcdma: dma-controller@485c0100 {
+			compatible = "ti,am64-dmss-bcdma";
+			reg = <0x00 0x485c0100 0x00 0x100>,
+			      <0x00 0x4c000000 0x00 0x20000>,
+			      <0x00 0x4a820000 0x00 0x20000>,
+			      <0x00 0x4aa40000 0x00 0x20000>,
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <3>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <26>;
+			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+			bootph-all;
+		};
+
+		main_pktdma: dma-controller@485c0000 {
+			compatible = "ti,am64-dmss-pktdma";
+			reg = <0x00 0x485c0000 0x00 0x100>,
+			      <0x00 0x4a800000 0x00 0x20000>,
+			      <0x00 0x4aa00000 0x00 0x20000>,
+			      <0x00 0x4b800000 0x00 0x200000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <2>;
+			bootph-all;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <30>;
+			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+						<0x24>, /* CPSW_TX_CHAN */
+						<0x25>, /* SAUL_TX_0_CHAN */
+						<0x26>; /* SAUL_TX_1_CHAN */
+			ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+						<0x11>, /* RING_CPSW_TX_CHAN */
+						<0x12>, /* RING_SAUL_TX_0_CHAN */
+						<0x13>; /* RING_SAUL_TX_1_CHAN */
+			ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+						<0x2b>, /* CPSW_RX_CHAN */
+						<0x2d>, /* SAUL_RX_0_CHAN */
+						<0x2f>, /* SAUL_RX_1_CHAN */
+						<0x31>, /* SAUL_RX_2_CHAN */
+						<0x33>; /* SAUL_RX_3_CHAN */
+			ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+						<0x2c>, /* FLOW_CPSW_RX_CHAN */
+						<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+						<0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
+		};
+	};
+
+	dmss_csi: bus@4e000000 {
+		compatible = "simple-bus";
+		ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x408000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ti,sci-dev-id = <198>;
+
+		inta_main_dmss_csi: interrupt-controller@4e400000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x4e400000 0x00 0x8000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <200>;
+			ti,interrupt-ranges = <0 237 8>;
+			ti,unmapped-event-sources = <&main_bcdma_csi>;
+		};
+
+		main_bcdma_csi: dma-controller@4e230000 {
+			compatible = "ti,am62a-dmss-bcdma-csirx";
+			reg = <0x00 0x4e230000 0x00 0x100>,
+			      <0x00 0x4e180000 0x00 0x8000>,
+			      <0x00 0x4e100000 0x00 0x10000>;
+			reg-names = "gcfg", "rchanrt", "ringrt";
+			#dma-cells = <3>;
+			msi-parent = <&inta_main_dmss_csi>;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <199>;
+			ti,sci-rm-range-rchan = <0x21>;
+		};
+	};
+
+	dmsc: system-controller@44043000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes = <&secure_proxy_main 12>,
+			 <&secure_proxy_main 13>;
+		reg-names = "debug_messages";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+		bootph-all;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+			bootph-all;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+			bootph-all;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+			bootph-all;
+		};
+	};
+
+	crypto: crypto@40900000 {
+		compatible = "ti,am62-sa3ul";
+		reg = <0x00 0x40900000 0x00 0x1200>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
+		       <&main_pktdma 0x7507 0>;
+		dma-names = "tx", "rx1", "rx2";
+	};
+
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+		bootph-all;
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2ac>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+		bootph-all;
+	};
+
+	main_esm: esm@420000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x420000 0x00 0x1000>;
+		ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
+		bootph-pre-ram;
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		bootph-all;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 2>;
+		assigned-clock-parents = <&k3_clks 37 3>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 2>;
+		assigned-clock-parents = <&k3_clks 38 3>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 2>;
+		assigned-clock-parents = <&k3_clks 39 3>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 2>;
+		assigned-clock-parents = <&k3_clks 40 3>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 2>;
+		assigned-clock-parents = <&k3_clks 41 3>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 2>;
+		assigned-clock-parents = <&k3_clks 42 3>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 2>;
+		assigned-clock-parents = <&k3_clks 43 3>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 154 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 155 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_spi0: spi@20100000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x20100000 0x00 0x400>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 0>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@20110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20110000 0x00 0x400>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@20120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20120000 0x00 0x400>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <3>;
+		ti,interrupt-ranges = <0 32 16>;
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <190>, <191>, <192>,
+			     <193>, <194>, <195>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 77 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00601000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <180>, <181>, <182>,
+			     <183>, <184>, <185>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 78 0>;
+		clock-names = "gpio";
+	};
+
+	sdhci0: mmc@fa10000 {
+		compatible = "ti,am64-sdhci-8bit";
+		reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 57 1>, <&k3_clks 57 2>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 57 2>;
+		assigned-clock-parents = <&k3_clks 57 4>;
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		ti,clkbuf-sel = <0x7>;
+		ti,strobe-sel = <0x77>;
+		ti,trm-icp = <0x8>;
+		ti,otap-del-sel-legacy = <0x1>;
+		ti,otap-del-sel-mmc-hs = <0x1>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
+		status = "disabled";
+	};
+
+	sdhci1: mmc@fa00000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		status = "disabled";
+	};
+
+	sdhci2: mmc@fa20000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		status = "disabled";
+	};
+
+	usbss0: usb@f900000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f900000 0x00 0x800>,
+		      <0x00 0x0f908000 0x00 0x400>;
+		clocks = <&k3_clks 161 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb0: usb@31000000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31000000 0x00 0x50000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+			<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
+		};
+	};
+
+	fss: bus@fc00000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x0fc00000 0x00 0x70000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@fc40000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x0fc40000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 75 7>;
+			assigned-clocks = <&k3_clks 75 7>;
+			assigned-clock-parents = <&k3_clks 75 8>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	cpsw3g: ethernet@8000000 {
+		compatible = "ti,am642-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0x08000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>;
+		clocks = <&k3_clks 13 0>;
+		assigned-clocks = <&k3_clks 13 3>;
+		assigned-clock-parents = <&k3_clks 13 11>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		dmas = <&main_pktdma 0xc600 15>,
+		       <&main_pktdma 0xc601 15>,
+		       <&main_pktdma 0xc602 15>,
+		       <&main_pktdma 0xc603 15>,
+		       <&main_pktdma 0xc604 15>,
+		       <&main_pktdma 0xc605 15>,
+		       <&main_pktdma 0xc606 15>,
+		       <&main_pktdma 0xc607 15>,
+		       <&main_pktdma 0x4600 15>;
+		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
+			    "tx7", "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel 1>;
+				mac-address = [00 00 00 00 00 00];
+				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
+				status = "disabled";
+			};
+
+			cpsw_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				phys = <&phy_gmii_sel 2>;
+				mac-address = [00 00 00 00 00 00];
+				status = "disabled";
+			};
+		};
+
+		cpsw3g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 13 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 13 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	hwspinlock: spinlock@2a000000 {
+		compatible = "ti,am64-hwspinlock";
+		reg = <0x00 0x2a000000 0x00 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	mailbox0_cluster0: mailbox@29000000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29000000 0x00 0x200>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster1: mailbox@29010000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29010000 0x00 0x200>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster2: mailbox@29020000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29020000 0x00 0x200>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster3: mailbox@29030000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29030000 0x00 0x200>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	ecap0: pwm@23100000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23100000 0x00 0x100>;
+		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 51 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap1: pwm@23110000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23110000 0x00 0x100>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 52 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap2: pwm@23120000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23120000 0x00 0x100>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 53 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_mcan0: can@20701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20701000 0x00 0x200>,
+		      <0x00 0x20708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@20711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20711000 0x00 0x200>,
+		      <0x00 0x20718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 99 6>, <&k3_clks 99 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_rti0: watchdog@e000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	main_rti2: watchdog@e020000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e020000 0x00 0x100>;
+		clocks = <&k3_clks 127 0>;
+		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 127 0>;
+		assigned-clock-parents = <&k3_clks 127 2>;
+	};
+
+	main_rti3: watchdog@e030000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e030000 0x00 0x100>;
+		clocks = <&k3_clks 128 0>;
+		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 128 0>;
+		assigned-clock-parents = <&k3_clks 128 2>;
+	};
+
+	main_rti15: watchdog@e0f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e0f0000 0x00 0x100>;
+		clocks = <&k3_clks 130 0>;
+		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 130 0>;
+		assigned-clock-parents = <&k3_clks 130 2>;
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23000000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23010000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23020000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x5000 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	vpu: video-codec@30210000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x30210000 0x00 0x10000>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 204 2>;
+		power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
+	};
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am62p-mcu.dtsi b/dts/upstream/src/arm64/ti/k3-am62p-j722s-common-mcu.dtsi
index b973b550eb9..df794515639 100644
--- a/dts/upstream/src/arm64/ti/k3-am62p-mcu.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62p-j722s-common-mcu.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Device Tree file for the AM62P MCU domain peripherals
+ * Device Tree file for the MCU domain peripherals shared by AM62P and J722S
+ *
  * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
@@ -11,7 +12,15 @@
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
+		pinctrl-single,gpio-range =
+			<&mcu_pmx_range 0 21 PIN_GPIO_RANGE_IOPAD>,
+			<&mcu_pmx_range 23 1 PIN_GPIO_RANGE_IOPAD>,
+			<&mcu_pmx_range 32 2 PIN_GPIO_RANGE_IOPAD>;
 		bootph-all;
+
+		mcu_pmx_range: gpio-range {
+			#pinctrl-single,gpio-range-cells = <3>;
+		};
 	};
 
 	mcu_esm: esm@4100000 {
@@ -137,6 +146,8 @@
 		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 79 0>;
 		clock-names = "gpio";
+		gpio-ranges = <&mcu_pmx0 0 0 21>, <&mcu_pmx0 21 23 1>,
+			      <&mcu_pmx0 22 32 2>;
 	};
 
 	mcu_rti0: watchdog@4880000 {
diff --git a/dts/upstream/src/arm64/ti/k3-am62p-thermal.dtsi b/dts/upstream/src/arm64/ti/k3-am62p-j722s-common-thermal.dtsi
index c7486fb2a5b..c7486fb2a5b 100644
--- a/dts/upstream/src/arm64/ti/k3-am62p-thermal.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62p-j722s-common-thermal.dtsi
diff --git a/dts/upstream/src/arm64/ti/k3-am62p-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-am62p-j722s-common-wakeup.dtsi
index c71d9624ea2..315d0092e73 100644
--- a/dts/upstream/src/arm64/ti/k3-am62p-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62p-j722s-common-wakeup.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Device Tree file for the AM62P wakeup domain peripherals
+ * Device Tree file for the WAKEUP domain peripherals shared by AM62P and J722S
+ *
  * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
@@ -19,6 +20,11 @@
 			bootph-all;
 		};
 
+		cpsw_mac_syscon: ethernet-mac-syscon@200 {
+			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
+			reg = <0x200 0x8>;
+		};
+
 		usb0_phy_ctrl: syscon@4008 {
 			compatible = "ti,am62-usb-phy-ctrl", "syscon";
 			reg = <0x4008 0x4>;
diff --git a/dts/upstream/src/arm64/ti/k3-am62p-main.dtsi b/dts/upstream/src/arm64/ti/k3-am62p-main.dtsi
index 900d1f9530a..0ce9721b417 100644
--- a/dts/upstream/src/arm64/ti/k3-am62p-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62p-main.dtsi
@@ -1,666 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Device Tree file for the AM62P main domain peripherals
+ * Device Tree file for the AM62P MAIN domain peripherals
+ *
  * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_main {
-	oc_sram: sram@70000000 {
-		compatible = "mmio-sram";
-		reg = <0x00 0x70000000 0x00 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00 0x00 0x70000000 0x10000>;
-	};
-
-	gic500: interrupt-controller@1800000 {
-		compatible = "arm,gic-v3";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
-		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
-		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
-		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
-		/*
-		 * vcpumntirq:
-		 * virtual CPU interface maintenance interrupt
-		 */
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-
-		gic_its: msi-controller@1820000 {
-			compatible = "arm,gic-v3-its";
-			reg = <0x00 0x01820000 0x00 0x10000>;
-			socionext,synquacer-pre-its = <0x1000000 0x400000>;
-			msi-controller;
-			#msi-cells = <1>;
-		};
-	};
-
-	main_conf: bus@100000 {
-		compatible = "simple-bus";
-		reg = <0x00 0x00100000 0x00 0x20000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00 0x00 0x00100000 0x20000>;
-
-		phy_gmii_sel: phy@4044 {
-			compatible = "ti,am654-phy-gmii-sel";
-			reg = <0x4044 0x8>;
-			#phy-cells = <1>;
-		};
-
-		epwm_tbclk: clock-controller@4130 {
-			compatible = "ti,am62-epwm-tbclk";
-			reg = <0x4130 0x4>;
-			#clock-cells = <1>;
-		};
-	};
-
-	dmss: bus@48000000 {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		dma-ranges;
-		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
-		bootph-all;
-
-		ti,sci-dev-id = <25>;
-
-		secure_proxy_main: mailbox@4d000000 {
-			compatible = "ti,am654-secure-proxy";
-			#mbox-cells = <1>;
-			reg-names = "target_data", "rt", "scfg";
-			reg = <0x00 0x4d000000 0x00 0x80000>,
-			      <0x00 0x4a600000 0x00 0x80000>,
-			      <0x00 0x4a400000 0x00 0x80000>;
-			interrupt-names = "rx_012";
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			bootph-all;
-		};
-
-		inta_main_dmss: interrupt-controller@48000000 {
-			compatible = "ti,sci-inta";
-			reg = <0x00 0x48000000 0x00 0x100000>;
-			#interrupt-cells = <0>;
-			interrupt-controller;
-			interrupt-parent = <&gic500>;
-			msi-controller;
-			ti,sci = <&dmsc>;
-			ti,sci-dev-id = <28>;
-			ti,interrupt-ranges = <5 69 35>;
-			ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
-		};
-
-		main_bcdma: dma-controller@485c0100 {
-			compatible = "ti,am64-dmss-bcdma";
-			reg = <0x00 0x485c0100 0x00 0x100>,
-			      <0x00 0x4c000000 0x00 0x20000>,
-			      <0x00 0x4a820000 0x00 0x20000>,
-			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>,
-			      <0x00 0x48600000 0x00 0x8000>,
-			      <0x00 0x484a4000 0x00 0x2000>,
-			      <0x00 0x484c2000 0x00 0x2000>,
-			      <0x00 0x48420000 0x00 0x2000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
-				    "ring", "tchan", "rchan", "bchan";
-			msi-parent = <&inta_main_dmss>;
-			#dma-cells = <3>;
-
-			ti,sci = <&dmsc>;
-			ti,sci-dev-id = <26>;
-			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
-			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
-			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
-			bootph-all;
-		};
-
-		main_pktdma: dma-controller@485c0000 {
-			compatible = "ti,am64-dmss-pktdma";
-			reg = <0x00 0x485c0000 0x00 0x100>,
-			      <0x00 0x4a800000 0x00 0x20000>,
-			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>,
-			      <0x00 0x485e0000 0x00 0x10000>,
-			      <0x00 0x484a0000 0x00 0x2000>,
-			      <0x00 0x484c0000 0x00 0x2000>,
-			      <0x00 0x48430000 0x00 0x1000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
-				    "ring", "tchan", "rchan", "rflow";
-			msi-parent = <&inta_main_dmss>;
-			#dma-cells = <2>;
-			bootph-all;
-
-			ti,sci = <&dmsc>;
-			ti,sci-dev-id = <30>;
-			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
-						<0x24>, /* CPSW_TX_CHAN */
-						<0x25>, /* SAUL_TX_0_CHAN */
-						<0x26>; /* SAUL_TX_1_CHAN */
-			ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
-						<0x11>, /* RING_CPSW_TX_CHAN */
-						<0x12>, /* RING_SAUL_TX_0_CHAN */
-						<0x13>; /* RING_SAUL_TX_1_CHAN */
-			ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
-						<0x2b>, /* CPSW_RX_CHAN */
-						<0x2d>, /* SAUL_RX_0_CHAN */
-						<0x2f>, /* SAUL_RX_1_CHAN */
-						<0x31>, /* SAUL_RX_2_CHAN */
-						<0x33>; /* SAUL_RX_3_CHAN */
-			ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
-						<0x2c>, /* FLOW_CPSW_RX_CHAN */
-						<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
-						<0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
-		};
-	};
-
-	dmss_csi: bus@4e000000 {
-		compatible = "simple-bus";
-		ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x408000>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		dma-ranges;
-		ti,sci-dev-id = <198>;
-
-		inta_main_dmss_csi: interrupt-controller@4e400000 {
-			compatible = "ti,sci-inta";
-			reg = <0x00 0x4e400000 0x00 0x8000>;
-			#interrupt-cells = <0>;
-			interrupt-controller;
-			interrupt-parent = <&gic500>;
-			msi-controller;
-			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
-			ti,sci = <&dmsc>;
-			ti,sci-dev-id = <200>;
-			ti,interrupt-ranges = <0 237 8>;
-			ti,unmapped-event-sources = <&main_bcdma_csi>;
-		};
-
-		main_bcdma_csi: dma-controller@4e230000 {
-			compatible = "ti,am62a-dmss-bcdma-csirx";
-			reg = <0x00 0x4e230000 0x00 0x100>,
-			      <0x00 0x4e180000 0x00 0x8000>,
-			      <0x00 0x4e100000 0x00 0x10000>;
-			reg-names = "gcfg", "rchanrt", "ringrt";
-			#dma-cells = <3>;
-			msi-parent = <&inta_main_dmss_csi>;
-			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
-			ti,sci = <&dmsc>;
-			ti,sci-dev-id = <199>;
-			ti,sci-rm-range-rchan = <0x21>;
-		};
-	};
-
-	dmsc: system-controller@44043000 {
-		compatible = "ti,k2g-sci";
-		ti,host-id = <12>;
-		mbox-names = "rx", "tx";
-		mboxes = <&secure_proxy_main 12>,
-			 <&secure_proxy_main 13>;
-		reg-names = "debug_messages";
-		reg = <0x00 0x44043000 0x00 0xfe0>;
-		bootph-all;
-
-		k3_pds: power-controller {
-			compatible = "ti,sci-pm-domain";
-			#power-domain-cells = <2>;
-			bootph-all;
-		};
-
-		k3_clks: clock-controller {
-			compatible = "ti,k2g-sci-clk";
-			#clock-cells = <2>;
-			bootph-all;
-		};
-
-		k3_reset: reset-controller {
-			compatible = "ti,sci-reset";
-			#reset-cells = <2>;
-			bootph-all;
-		};
-	};
-
-	crypto: crypto@40900000 {
-		compatible = "ti,am62-sa3ul";
-		reg = <0x00 0x40900000 0x00 0x1200>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
-
-		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
-		       <&main_pktdma 0x7507 0>;
-		dma-names = "tx", "rx1", "rx2";
-	};
-
-	secure_proxy_sa3: mailbox@43600000 {
-		compatible = "ti,am654-secure-proxy";
-		#mbox-cells = <1>;
-		reg-names = "target_data", "rt", "scfg";
-		reg = <0x00 0x43600000 0x00 0x10000>,
-		      <0x00 0x44880000 0x00 0x20000>,
-		      <0x00 0x44860000 0x00 0x20000>;
-		/*
-		 * Marked Disabled:
-		 * Node is incomplete as it is meant for bootloaders and
-		 * firmware on non-MPU processors
-		 */
-		status = "disabled";
-		bootph-all;
-	};
-
-	main_pmx0: pinctrl@f4000 {
-		compatible = "pinctrl-single";
-		reg = <0x00 0xf4000 0x00 0x2ac>;
-		#pinctrl-cells = <1>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-		bootph-all;
-	};
-
-	main_esm: esm@420000 {
-		compatible = "ti,j721e-esm";
-		reg = <0x00 0x420000 0x00 0x1000>;
-		ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
-		bootph-pre-ram;
-	};
-
-	main_timer0: timer@2400000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2400000 0x00 0x400>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 36 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 36 2>;
-		assigned-clock-parents = <&k3_clks 36 3>;
-		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-		bootph-all;
-	};
-
-	main_timer1: timer@2410000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2410000 0x00 0x400>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 37 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 37 2>;
-		assigned-clock-parents = <&k3_clks 37 3>;
-		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer2: timer@2420000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2420000 0x00 0x400>;
-		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 38 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 38 2>;
-		assigned-clock-parents = <&k3_clks 38 3>;
-		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer3: timer@2430000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2430000 0x00 0x400>;
-		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 39 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 39 2>;
-		assigned-clock-parents = <&k3_clks 39 3>;
-		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer4: timer@2440000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2440000 0x00 0x400>;
-		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 40 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 40 2>;
-		assigned-clock-parents = <&k3_clks 40 3>;
-		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer5: timer@2450000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2450000 0x00 0x400>;
-		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 41 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 41 2>;
-		assigned-clock-parents = <&k3_clks 41 3>;
-		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer6: timer@2460000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2460000 0x00 0x400>;
-		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 42 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 42 2>;
-		assigned-clock-parents = <&k3_clks 42 3>;
-		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_timer7: timer@2470000 {
-		compatible = "ti,am654-timer";
-		reg = <0x00 0x2470000 0x00 0x400>;
-		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 43 2>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 43 2>;
-		assigned-clock-parents = <&k3_clks 43 3>;
-		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
-		ti,timer-pwm;
-	};
-
-	main_uart0: serial@2800000 {
-		compatible = "ti,am64-uart", "ti,am654-uart";
-		reg = <0x00 0x02800000 0x00 0x100>;
-		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 146 0>;
-		clock-names = "fclk";
-		status = "disabled";
-	};
-
-	main_uart1: serial@2810000 {
-		compatible = "ti,am64-uart", "ti,am654-uart";
-		reg = <0x00 0x02810000 0x00 0x100>;
-		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 152 0>;
-		clock-names = "fclk";
-		status = "disabled";
-	};
-
-	main_uart2: serial@2820000 {
-		compatible = "ti,am64-uart", "ti,am654-uart";
-		reg = <0x00 0x02820000 0x00 0x100>;
-		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 153 0>;
-		clock-names = "fclk";
-		status = "disabled";
-	};
-
-	main_uart3: serial@2830000 {
-		compatible = "ti,am64-uart", "ti,am654-uart";
-		reg = <0x00 0x02830000 0x00 0x100>;
-		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 154 0>;
-		clock-names = "fclk";
-		status = "disabled";
-	};
-
-	main_uart4: serial@2840000 {
-		compatible = "ti,am64-uart", "ti,am654-uart";
-		reg = <0x00 0x02840000 0x00 0x100>;
-		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 155 0>;
-		clock-names = "fclk";
-		status = "disabled";
-	};
-
-	main_uart5: serial@2850000 {
-		compatible = "ti,am64-uart", "ti,am654-uart";
-		reg = <0x00 0x02850000 0x00 0x100>;
-		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 156 0>;
-		clock-names = "fclk";
-		status = "disabled";
-	};
-
-	main_uart6: serial@2860000 {
-		compatible = "ti,am64-uart", "ti,am654-uart";
-		reg = <0x00 0x02860000 0x00 0x100>;
-		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 158 0>;
-		clock-names = "fclk";
-		status = "disabled";
-	};
-
-	main_i2c0: i2c@20000000 {
-		compatible = "ti,am64-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x20000000 0x00 0x100>;
-		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 102 2>;
-		clock-names = "fck";
-		status = "disabled";
-	};
-
-	main_i2c1: i2c@20010000 {
-		compatible = "ti,am64-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x20010000 0x00 0x100>;
-		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 103 2>;
-		clock-names = "fck";
-		status = "disabled";
-	};
-
-	main_i2c2: i2c@20020000 {
-		compatible = "ti,am64-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x20020000 0x00 0x100>;
-		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 104 2>;
-		clock-names = "fck";
-		status = "disabled";
-	};
-
-	main_i2c3: i2c@20030000 {
-		compatible = "ti,am64-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x20030000 0x00 0x100>;
-		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 105 2>;
-		clock-names = "fck";
-		status = "disabled";
-	};
-
-	main_spi0: spi@20100000 {
-		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
-		reg = <0x00 0x20100000 0x00 0x400>;
-		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 141 0>;
-		status = "disabled";
-	};
-
-	main_spi1: spi@20110000 {
-		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
-		reg = <0x00 0x20110000 0x00 0x400>;
-		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 142 0>;
-		status = "disabled";
-	};
-
-	main_spi2: spi@20120000 {
-		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
-		reg = <0x00 0x20120000 0x00 0x400>;
-		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 143 0>;
-		status = "disabled";
-	};
-
-	main_gpio_intr: interrupt-controller@a00000 {
-		compatible = "ti,sci-intr";
-		reg = <0x00 0x00a00000 0x00 0x800>;
-		ti,intr-trigger-type = <1>;
-		interrupt-controller;
-		interrupt-parent = <&gic500>;
-		#interrupt-cells = <1>;
-		ti,sci = <&dmsc>;
-		ti,sci-dev-id = <3>;
-		ti,interrupt-ranges = <0 32 16>;
-	};
-
-	main_gpio0: gpio@600000 {
-		compatible = "ti,am64-gpio", "ti,keystone-gpio";
-		reg = <0x00 0x00600000 0x00 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <190>, <191>, <192>,
-			     <193>, <194>, <195>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,ngpio = <92>;
-		ti,davinci-gpio-unbanked = <0>;
-		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 77 0>;
-		clock-names = "gpio";
-	};
-
-	main_gpio1: gpio@601000 {
-		compatible = "ti,am64-gpio", "ti,keystone-gpio";
-		reg = <0x00 0x00601000 0x00 0x100>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <180>, <181>, <182>,
-			     <183>, <184>, <185>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,ngpio = <52>;
-		ti,davinci-gpio-unbanked = <0>;
-		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 78 0>;
-		clock-names = "gpio";
-	};
-
-	sdhci0: mmc@fa10000 {
-		compatible = "ti,am64-sdhci-8bit";
-		reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>;
-		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 57 1>, <&k3_clks 57 2>;
-		clock-names = "clk_ahb", "clk_xin";
-		assigned-clocks = <&k3_clks 57 2>;
-		assigned-clock-parents = <&k3_clks 57 4>;
-		bus-width = <8>;
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
-		ti,clkbuf-sel = <0x7>;
-		ti,strobe-sel = <0x77>;
-		ti,trm-icp = <0x8>;
-		ti,otap-del-sel-legacy = <0x1>;
-		ti,otap-del-sel-mmc-hs = <0x1>;
-		ti,otap-del-sel-ddr52 = <0x6>;
-		ti,otap-del-sel-hs200 = <0x8>;
-		ti,otap-del-sel-hs400 = <0x5>;
-		ti,itap-del-sel-legacy = <0x10>;
-		ti,itap-del-sel-mmc-hs = <0xa>;
-		ti,itap-del-sel-ddr52 = <0x3>;
-		status = "disabled";
-	};
-
-	sdhci1: mmc@fa00000 {
-		compatible = "ti,am62-sdhci";
-		reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
-		clock-names = "clk_ahb", "clk_xin";
-		bus-width = <4>;
-		ti,clkbuf-sel = <0x7>;
-		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0xf>;
-		ti,otap-del-sel-sdr25 = <0xf>;
-		ti,otap-del-sel-sdr50 = <0xc>;
-		ti,otap-del-sel-ddr50 = <0x9>;
-		ti,otap-del-sel-sdr104 = <0x6>;
-		ti,itap-del-sel-legacy = <0x0>;
-		ti,itap-del-sel-sd-hs = <0x0>;
-		ti,itap-del-sel-sdr12 = <0x0>;
-		ti,itap-del-sel-sdr25 = <0x0>;
-		status = "disabled";
-	};
-
-	sdhci2: mmc@fa20000 {
-		compatible = "ti,am62-sdhci";
-		reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
-		clock-names = "clk_ahb", "clk_xin";
-		bus-width = <4>;
-		ti,clkbuf-sel = <0x7>;
-		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0xf>;
-		ti,otap-del-sel-sdr25 = <0xf>;
-		ti,otap-del-sel-sdr50 = <0xc>;
-		ti,otap-del-sel-ddr50 = <0x9>;
-		ti,otap-del-sel-sdr104 = <0x6>;
-		ti,itap-del-sel-legacy = <0x0>;
-		ti,itap-del-sel-sd-hs = <0x0>;
-		ti,itap-del-sel-sdr12 = <0x0>;
-		ti,itap-del-sel-sdr25 = <0x0>;
-		status = "disabled";
-	};
-
-	usbss0: usb@f900000 {
-		compatible = "ti,am62-usb";
-		reg = <0x00 0x0f900000 0x00 0x800>,
-		      <0x00 0x0f908000 0x00 0x400>;
-		clocks = <&k3_clks 161 3>;
-		clock-names = "ref";
-		ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
-		ranges;
-		status = "disabled";
-
-		usb0: usb@31000000 {
-			compatible = "snps,dwc3";
-			reg = <0x00 0x31000000 0x00 0x50000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
-			<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
-			interrupt-names = "host", "peripheral";
-			maximum-speed = "high-speed";
-			dr_mode = "otg";
-			snps,usb2-gadget-lpm-disable;
-			snps,usb2-lpm-disable;
-		};
-	};
-
 	usbss1: usb@f910000 {
 		compatible = "ti,am62-usb";
 		reg = <0x00 0x0f910000 0x00 0x800>,
@@ -686,408 +31,39 @@
 			snps,usb2-lpm-disable;
 		};
 	};
+};
 
-	fss: bus@fc00000 {
-		compatible = "simple-bus";
-		reg = <0x00 0x0fc00000 0x00 0x70000>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		ospi0: spi@fc40000 {
-			compatible = "ti,am654-ospi", "cdns,qspi-nor";
-			reg = <0x00 0x0fc40000 0x00 0x100>,
-			      <0x05 0x00000000 0x01 0x00000000>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-			cdns,fifo-depth = <256>;
-			cdns,fifo-width = <4>;
-			cdns,trigger-address = <0x0>;
-			clocks = <&k3_clks 75 7>;
-			assigned-clocks = <&k3_clks 75 7>;
-			assigned-clock-parents = <&k3_clks 75 8>;
-			assigned-clock-rates = <166666666>;
-			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-	};
-
-	cpsw3g: ethernet@8000000 {
-		compatible = "ti,am642-cpsw-nuss";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		reg = <0x00 0x08000000 0x00 0x200000>;
-		reg-names = "cpsw_nuss";
-		ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>;
-		clocks = <&k3_clks 13 0>;
-		assigned-clocks = <&k3_clks 13 3>;
-		assigned-clock-parents = <&k3_clks 13 11>;
-		clock-names = "fck";
-		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-
-		dmas = <&main_pktdma 0xc600 15>,
-		       <&main_pktdma 0xc601 15>,
-		       <&main_pktdma 0xc602 15>,
-		       <&main_pktdma 0xc603 15>,
-		       <&main_pktdma 0xc604 15>,
-		       <&main_pktdma 0xc605 15>,
-		       <&main_pktdma 0xc606 15>,
-		       <&main_pktdma 0xc607 15>,
-		       <&main_pktdma 0x4600 15>;
-		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
-			    "tx7", "rx";
-
-		ethernet-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cpsw_port1: port@1 {
-				reg = <1>;
-				ti,mac-only;
-				label = "port1";
-				phys = <&phy_gmii_sel 1>;
-				mac-address = [00 00 00 00 00 00];
-				status = "disabled";
-			};
-
-			cpsw_port2: port@2 {
-				reg = <2>;
-				ti,mac-only;
-				label = "port2";
-				phys = <&phy_gmii_sel 2>;
-				mac-address = [00 00 00 00 00 00];
-				status = "disabled";
-			};
-		};
-
-		cpsw3g_mdio: mdio@f00 {
-			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-			reg = <0x00 0xf00 0x00 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&k3_clks 13 0>;
-			clock-names = "fck";
-			bus_freq = <1000000>;
-			status = "disabled";
-		};
-
-		cpts@3d000 {
-			compatible = "ti,j721e-cpts";
-			reg = <0x00 0x3d000 0x00 0x400>;
-			clocks = <&k3_clks 13 3>;
-			clock-names = "cpts";
-			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cpts";
-			ti,cpts-ext-ts-inputs = <4>;
-			ti,cpts-periodic-outputs = <2>;
-		};
-	};
-
-	hwspinlock: spinlock@2a000000 {
-		compatible = "ti,am64-hwspinlock";
-		reg = <0x00 0x2a000000 0x00 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
-	mailbox0_cluster0: mailbox@29000000 {
-		compatible = "ti,am64-mailbox";
-		reg = <0x00 0x29000000 0x00 0x200>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		#mbox-cells = <1>;
-		ti,mbox-num-users = <4>;
-		ti,mbox-num-fifos = <16>;
-	};
-
-	mailbox0_cluster1: mailbox@29010000 {
-		compatible = "ti,am64-mailbox";
-		reg = <0x00 0x29010000 0x00 0x200>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		#mbox-cells = <1>;
-		ti,mbox-num-users = <4>;
-		ti,mbox-num-fifos = <16>;
-	};
-
-	mailbox0_cluster2: mailbox@29020000 {
-		compatible = "ti,am64-mailbox";
-		reg = <0x00 0x29020000 0x00 0x200>;
-		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		#mbox-cells = <1>;
-		ti,mbox-num-users = <4>;
-		ti,mbox-num-fifos = <16>;
-	};
-
-	mailbox0_cluster3: mailbox@29030000 {
-		compatible = "ti,am64-mailbox";
-		reg = <0x00 0x29030000 0x00 0x200>;
-		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-		#mbox-cells = <1>;
-		ti,mbox-num-users = <4>;
-		ti,mbox-num-fifos = <16>;
-	};
-
-	ecap0: pwm@23100000 {
-		compatible = "ti,am3352-ecap";
-		#pwm-cells = <3>;
-		reg = <0x00 0x23100000 0x00 0x100>;
-		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 51 0>;
-		clock-names = "fck";
-		status = "disabled";
-	};
-
-	ecap1: pwm@23110000 {
-		compatible = "ti,am3352-ecap";
-		#pwm-cells = <3>;
-		reg = <0x00 0x23110000 0x00 0x100>;
-		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 52 0>;
-		clock-names = "fck";
-		status = "disabled";
-	};
-
-	ecap2: pwm@23120000 {
-		compatible = "ti,am3352-ecap";
-		#pwm-cells = <3>;
-		reg = <0x00 0x23120000 0x00 0x100>;
-		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 53 0>;
-		clock-names = "fck";
-		status = "disabled";
-	};
-
-	main_mcan0: can@20701000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x20701000 0x00 0x200>,
-		      <0x00 0x20708000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_mcan1: can@20711000 {
-		compatible = "bosch,m_can";
-		reg = <0x00 0x20711000 0x00 0x200>,
-		      <0x00 0x20718000 0x00 0x8000>;
-		reg-names = "m_can", "message_ram";
-		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 99 6>, <&k3_clks 99 1>;
-		clock-names = "hclk", "cclk";
-		interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "int0", "int1";
-		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
-		status = "disabled";
-	};
-
-	main_rti0: watchdog@e000000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x0e000000 0x00 0x100>;
-		clocks = <&k3_clks 125 0>;
-		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 125 0>;
-		assigned-clock-parents = <&k3_clks 125 2>;
-	};
-
-	main_rti1: watchdog@e010000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x0e010000 0x00 0x100>;
-		clocks = <&k3_clks 126 0>;
-		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 126 0>;
-		assigned-clock-parents = <&k3_clks 126 2>;
-	};
-
-	main_rti2: watchdog@e020000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x0e020000 0x00 0x100>;
-		clocks = <&k3_clks 127 0>;
-		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 127 0>;
-		assigned-clock-parents = <&k3_clks 127 2>;
-	};
-
-	main_rti3: watchdog@e030000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x0e030000 0x00 0x100>;
-		clocks = <&k3_clks 128 0>;
-		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 128 0>;
-		assigned-clock-parents = <&k3_clks 128 2>;
-	};
-
-	main_rti15: watchdog@e0f0000 {
-		compatible = "ti,j7-rti-wdt";
-		reg = <0x00 0x0e0f0000 0x00 0x100>;
-		clocks = <&k3_clks 130 0>;
-		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
-		assigned-clocks = <&k3_clks 130 0>;
-		assigned-clock-parents = <&k3_clks 130 2>;
-	};
-
-	epwm0: pwm@23000000 {
-		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
-		#pwm-cells = <3>;
-		reg = <0x00 0x23000000 0x00 0x100>;
-		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
-		clock-names = "tbclk", "fck";
-		status = "disabled";
-	};
-
-	epwm1: pwm@23010000 {
-		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
-		#pwm-cells = <3>;
-		reg = <0x00 0x23010000 0x00 0x100>;
-		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
-		clock-names = "tbclk", "fck";
-		status = "disabled";
-	};
-
-	epwm2: pwm@23020000 {
-		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
-		#pwm-cells = <3>;
-		reg = <0x00 0x23020000 0x00 0x100>;
-		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
-		clock-names = "tbclk", "fck";
-		status = "disabled";
-	};
-
-	mcasp0: audio-controller@2b00000 {
-		compatible = "ti,am33xx-mcasp-audio";
-		reg = <0x00 0x02b00000 0x00 0x2000>,
-		      <0x00 0x02b08000 0x00 0x400>;
-		reg-names = "mpu", "dat";
-		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tx", "rx";
-
-		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
-		dma-names = "tx", "rx";
-
-		clocks = <&k3_clks 190 0>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 190 0>;
-		assigned-clock-parents = <&k3_clks 190 2>;
-		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	mcasp1: audio-controller@2b10000 {
-		compatible = "ti,am33xx-mcasp-audio";
-		reg = <0x00 0x02b10000 0x00 0x2000>,
-		      <0x00 0x02b18000 0x00 0x400>;
-		reg-names = "mpu", "dat";
-		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tx", "rx";
-
-		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
-		dma-names = "tx", "rx";
-
-		clocks = <&k3_clks 191 0>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 191 0>;
-		assigned-clock-parents = <&k3_clks 191 2>;
-		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	mcasp2: audio-controller@2b20000 {
-		compatible = "ti,am33xx-mcasp-audio";
-		reg = <0x00 0x02b20000 0x00 0x2000>,
-		      <0x00 0x02b28000 0x00 0x400>;
-		reg-names = "mpu", "dat";
-		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tx", "rx";
-
-		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
-		dma-names = "tx", "rx";
-
-		clocks = <&k3_clks 192 0>;
-		clock-names = "fck";
-		assigned-clocks = <&k3_clks 192 0>;
-		assigned-clock-parents = <&k3_clks 192 2>;
-		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
-
-	ti_csi2rx0: ticsi2rx@30102000 {
-		compatible = "ti,j721e-csi2rx-shim";
-		reg = <0x00 0x30102000 0x00 0x1000>;
-		ranges;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		dmas = <&main_bcdma_csi 0 0x5000 0>;
-		dma-names = "rx0";
-		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-
-		cdns_csi2rx0: csi-bridge@30101000 {
-			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
-			reg = <0x00 0x30101000 0x00 0x1000>;
-			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
-				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
-			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
-				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
-			phys = <&dphy0>;
-			phy-names = "dphy";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				csi0_port0: port@0 {
-					reg = <0>;
-					status = "disabled";
-				};
-
-				csi0_port1: port@1 {
-					reg = <1>;
-					status = "disabled";
-				};
+&oc_sram {
+	reg = <0x00 0x70000000 0x00 0x10000>;
+	ranges = <0x00 0x00 0x70000000 0x10000>;
+};
 
-				csi0_port2: port@2 {
-					reg = <2>;
-					status = "disabled";
-				};
+&inta_main_dmss {
+	ti,interrupt-ranges = <5 69 35>;
+};
 
-				csi0_port3: port@3 {
-					reg = <3>;
-					status = "disabled";
-				};
+&main_pmx0 {
+	pinctrl-single,gpio-range =
+		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 72 22 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>;
 
-				csi0_port4: port@4 {
-					reg = <4>;
-					status = "disabled";
-				};
-			};
-		};
+	main_pmx0_range: gpio-range {
+		#pinctrl-single,gpio-range-cells = <3>;
 	};
+};
 
-	dphy0: phy@30110000 {
-		compatible = "cdns,dphy-rx";
-		reg = <0x00 0x30110000 0x00 0x1100>;
-		#phy-cells = <0>;
-		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
-		status = "disabled";
-	};
+&main_gpio0 {
+	gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>,
+			<&main_pmx0 70 72 22>;
+	ti,ngpio = <92>;
+};
 
-	vpu: video-codec@30210000 {
-		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
-		reg = <0x00 0x30210000 0x00 0x10000>;
-		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&k3_clks 204 2>;
-		power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
-	};
+&main_gpio1 {
+	gpio-ranges = <&main_pmx0 0 94 32>, <&main_pmx0 42 137 5>,
+			<&main_pmx0 47 143 3>, <&main_pmx0 50 149 2>;
+	ti,ngpio = <52>;
 };
diff --git a/dts/upstream/src/arm64/ti/k3-am62p.dtsi b/dts/upstream/src/arm64/ti/k3-am62p.dtsi
index 94babc41257..75a15c368c1 100644
--- a/dts/upstream/src/arm64/ti/k3-am62p.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62p.dtsi
@@ -116,10 +116,13 @@
 		};
 	};
 
-	#include "k3-am62p-thermal.dtsi"
+	#include "k3-am62p-j722s-common-thermal.dtsi"
 };
 
 /* Now include peripherals for each bus segment */
+#include "k3-am62p-j722s-common-main.dtsi"
+#include "k3-am62p-j722s-common-mcu.dtsi"
+#include "k3-am62p-j722s-common-wakeup.dtsi"
+
+/* Include AM62P specific peripherals */
 #include "k3-am62p-main.dtsi"
-#include "k3-am62p-mcu.dtsi"
-#include "k3-am62p-wakeup.dtsi"
diff --git a/dts/upstream/src/arm64/ti/k3-am62p5-sk.dts b/dts/upstream/src/arm64/ti/k3-am62p5-sk.dts
index 6e723465911..ff65955551a 100644
--- a/dts/upstream/src/arm64/ti/k3-am62p5-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am62p5-sk.dts
@@ -207,7 +207,7 @@
 		pinctrl-single,pins = <
 			AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
 			AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX */
-			AM62PX_IOPAD(0x008c, PIN_INPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */
+			AM62PX_IOPAD(0x008c, PIN_OUTPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */
 			AM62PX_IOPAD(0x0084, PIN_INPUT, 2) /* (R25) GPMC0_ADVn_ALE.MCASP1_AXR2 */
 		>;
 	};
@@ -364,14 +364,9 @@
 			self-powered;
 			data-role = "dual";
 			power-role = "sink";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					usb_con_hs: endpoint {
-						remote-endpoint = <&usb0_hs_ep>;
-					};
+			port {
+				usb_con_hs: endpoint {
+				remote-endpoint = <&usb0_hs_ep>;
 				};
 			};
 		};
@@ -516,11 +511,8 @@
 
 &usb0 {
 	usb-role-switch;
-	#address-cells = <1>;
-	#size-cells = <0>;
 
-	port@0 {
-		reg = <0>;
+	port {
 		usb0_hs_ep: endpoint {
 			remote-endpoint = <&usb_con_hs>;
 		};
@@ -549,8 +541,6 @@
 	       0 0 0 0
 	       0 0 0 0
 	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
 };
 
 &fss {
diff --git a/dts/upstream/src/arm64/ti/k3-am62x-phyboard-lyra.dtsi b/dts/upstream/src/arm64/ti/k3-am62x-phyboard-lyra.dtsi
new file mode 100644
index 00000000000..e4633af87eb
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am62x-phyboard-lyra.dtsi
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		mmc1 = &sdhci1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		ethernet1 = &cpsw_port2;
+	};
+
+	can_tc1: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <8000000>;
+		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins_default>;
+
+		key-home {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		key-menu {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Lyra";
+		simple-audio-card,widgets =
+			"Microphone",           "Mic Jack",
+			"Headphone",            "Headphone Jack",
+			"Speaker",              "External Speaker";
+		simple-audio-card,routing =
+			"MIC3R",                "Mic Jack",
+			"Mic Jack",             "Mic Bias",
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"External Speaker",     "SPOP",
+			"External Speaker",     "SPOM";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp2>;
+		};
+
+		sound_master: simple-audio-card,codec {
+				sound-dai = <&audio_codec>;
+				clocks = <&audio_refclk1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
+
+		led-1 {
+			gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+		};
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_mmc: regulator-vcc-3v3-mmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_MMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sw: regulator-vcc-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+	audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
+		>;
+	};
+
+	gpio_keys_pins_default: gpio-keys-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+
+	gpio_exp_int_pins_default: gpio-exp-int-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	hdmi_int_pins_default: hdmi-int-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
+		>;
+	};
+
+	main_dss0_pins_default: main-dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+		>;
+	};
+
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */
+			AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */
+		>;
+	};
+
+	main_mcasp2_pins_default: main-mcasp2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */
+			AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */
+			AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */
+			AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */
+			AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */
+			AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */
+			AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */
+			AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */
+			AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */
+			AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */
+		>;
+	};
+
+	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
+			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
+			AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
+			AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
+			AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
+			AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
+			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
+			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
+			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
+			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
+			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
+			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */
+			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */
+			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
+			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
+		>;
+	};
+
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
+		>;
+	};
+
+	user_leds_pins_default: user-leds-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */
+		>;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy3>;
+};
+
+&cpsw3g_mdio {
+	cpsw3g_phy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+	status = "okay";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VP2: DPI/HDMI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	audio_codec: audio-codec@18 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_ext_refclk1_pins_default>;
+
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		ai3x-micbias-vg = <2>;
+
+		AVDD-supply = <&vcc_3v3_sw>;
+		IOVDD-supply = <&vcc_3v3_sw>;
+		DRVDD-supply = <&vcc_3v3_sw>;
+		DVDD-supply = <&vcc_1v8>;
+	};
+
+	gpio_exp: gpio-expander@21 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_exp_int_pins_default>;
+		compatible = "nxp,pcf8574";
+		reg = <0x21>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <49 0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "", "GPIO1_CAN0_nEN",
+				  "GPIO2_LED2", "GPIO3_LVDS_GPIO",
+				  "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
+				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
+	};
+
+	usb-pd@22 {
+		compatible = "ti,tps6598x";
+		reg = <0x22>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			port {
+				usb_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	sii9022: bridge-hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_int_pins_default>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x51>;
+	};
+};
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&can_tc1>;
+	status = "okay";
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+};
+
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	/* Main UART1 may be used by TIFS firmware */
+	status = "okay";
+};
+
+&mcasp2 {
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp2_pins_default>;
+
+	/* MCASP_IIS_MODE */
+	op-mode = <0>;
+	tdm-slots = <2>;
+
+	/* 0: INACTIVE, 1: TX, 2: RX */
+	serial-dir = <
+			0 0 1 2
+			0 0 0 0
+			0 0 0 0
+			0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+	status = "okay";
+};
+
+&sdhci1 {
+	vmmc-supply = <&vcc_3v3_mmc>;
+	vqmmc-supply = <&vddshv5_sdio>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	disable-wp;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usbss1 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	usb-role-switch;
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am62x-sk-common.dtsi b/dts/upstream/src/arm64/ti/k3-am62x-sk-common.dtsi
index 96378b19c41..44ff67b6bf1 100644
--- a/dts/upstream/src/arm64/ti/k3-am62x-sk-common.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62x-sk-common.dtsi
@@ -48,6 +48,14 @@
 			pmsg-size = <0x8000>;
 		};
 
+		/* global cma region */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00 0x8000000>;
+			linux,cma-default;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -160,6 +168,7 @@
 	};
 
 	main_i2c1_pins_default: main-i2c1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */
 			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */
@@ -339,15 +348,9 @@
 			self-powered;
 			data-role = "dual";
 			power-role = "sink";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					usb_con_hs: endpoint {
-						remote-endpoint = <&usb0_hs_ep>;
-					};
+			port {
+				usb_con_hs: endpoint {
+					remote-endpoint = <&usb0_hs_ep>;
 				};
 			};
 		};
@@ -474,12 +477,9 @@
 
 &usb0 {
 	bootph-all;
-	#address-cells = <1>;
-	#size-cells = <0>;
 	usb-role-switch;
 
-	port@0 {
-		reg = <0>;
+	port {
 		usb0_hs_ep: endpoint {
 		    remote-endpoint = <&usb_con_hs>;
 	       };
@@ -508,8 +508,6 @@
 	       0 0 0 0
 	       0 0 0 0
 	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
 };
 
 &dss {
diff --git a/dts/upstream/src/arm64/ti/k3-am64-main.dtsi b/dts/upstream/src/arm64/ti/k3-am64-main.dtsi
index 6f9aa5e0213..f8370dd0335 100644
--- a/dts/upstream/src/arm64/ti/k3-am64-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am64-main.dtsi
@@ -1283,6 +1283,9 @@
 			      <0x22400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am64x-pru0_0-fw";
+			interrupt-parent = <&icssg0_intc>;
+			interrupts = <16 2 2>;
+			interrupt-names = "vring";
 		};
 
 		rtu0_0: rtu@4000 {
@@ -1292,6 +1295,9 @@
 			      <0x23400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am64x-rtu0_0-fw";
+			interrupt-parent = <&icssg0_intc>;
+			interrupts = <20 4 4>;
+			interrupt-names = "vring";
 		};
 
 		tx_pru0_0: txpru@a000 {
@@ -1310,6 +1316,9 @@
 			      <0x24400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am64x-pru0_1-fw";
+			interrupt-parent = <&icssg0_intc>;
+			interrupts = <18 3 3>;
+			interrupt-names = "vring";
 		};
 
 		rtu0_1: rtu@6000 {
@@ -1319,6 +1328,9 @@
 			      <0x23c00 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am64x-rtu0_1-fw";
+			interrupt-parent = <&icssg0_intc>;
+			interrupts = <22 5 5>;
+			interrupt-names = "vring";
 		};
 
 		tx_pru0_1: txpru@c000 {
@@ -1436,6 +1448,9 @@
 			      <0x22400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am64x-pru1_0-fw";
+			interrupt-parent = <&icssg1_intc>;
+			interrupts = <16 2 2>;
+			interrupt-names = "vring";
 		};
 
 		rtu1_0: rtu@4000 {
@@ -1445,6 +1460,9 @@
 			      <0x23400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am64x-rtu1_0-fw";
+			interrupt-parent = <&icssg1_intc>;
+			interrupts = <20 4 4>;
+			interrupt-names = "vring";
 		};
 
 		tx_pru1_0: txpru@a000 {
@@ -1463,6 +1481,9 @@
 			      <0x24400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am64x-pru1_1-fw";
+			interrupt-parent = <&icssg1_intc>;
+			interrupts = <18 3 3>;
+			interrupt-names = "vring";
 		};
 
 		rtu1_1: rtu@6000 {
@@ -1472,6 +1493,9 @@
 			      <0x23c00 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am64x-rtu1_1-fw";
+			interrupt-parent = <&icssg1_intc>;
+			interrupts = <22 5 5>;
+			interrupt-names = "vring";
 		};
 
 		tx_pru1_1: txpru@c000 {
diff --git a/dts/upstream/src/arm64/ti/k3-am64-phycore-som.dtsi b/dts/upstream/src/arm64/ti/k3-am64-phycore-som.dtsi
index 125e507966f..ea7c58fb67e 100644
--- a/dts/upstream/src/arm64/ti/k3-am64-phycore-som.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am64-phycore-som.dtsi
@@ -265,6 +265,50 @@
 		interrupts = <70 IRQ_TYPE_EDGE_FALLING>;
 		wakeup-source;
 	};
+
+	pmic@61 {
+		compatible = "ti,lp8733";
+		reg = <0x61>;
+
+		buck0-in-supply = <&vcc_5v0_som>;
+		buck1-in-supply = <&vcc_5v0_som>;
+		ldo0-in-supply = <&vdd_3v3>;
+		ldo1-in-supply = <&vdd_3v3>;
+
+		regulators {
+			vdd_core: buck0 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_3v3: buck1 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_1v8_ldo0: ldo0 {
+				regulator-name = "VDD_1V8_LDO0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdda_1v8: ldo1 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
 };
 
 &main_r5fss0_core0 {
@@ -296,7 +340,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
 
-	flash@0 {
+	serial_flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;
diff --git a/dts/upstream/src/arm64/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso b/dts/upstream/src/arm64/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso
index 79ed19c6c0e..c4525024ba5 100644
--- a/dts/upstream/src/arm64/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso
+++ b/dts/upstream/src/arm64/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
  */
 
 /dts-v1/;
diff --git a/dts/upstream/src/arm64/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso b/dts/upstream/src/arm64/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso
index 32596a84b7b..82f8a21b6cb 100644
--- a/dts/upstream/src/arm64/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso
+++ b/dts/upstream/src/arm64/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
  */
 
 /dts-v1/;
diff --git a/dts/upstream/src/arm64/ti/k3-am642-evm-icssg1-dualemac-mii.dtso b/dts/upstream/src/arm64/ti/k3-am642-evm-icssg1-dualemac-mii.dtso
new file mode 100644
index 00000000000..423d6027278
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am642-evm-icssg1-dualemac-mii.dtso
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT overlay for enabling both ICSSG1 port on AM642 EVM in MII mode
+ *
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/icssg1-eth/ethernet-ports/port@1";
+	};
+
+	mdio-mux-2 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mdio_mux>;
+		mdio-parent-bus = <&icssg1_mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			icssg1_phy2: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	icssg1_mii1_pins_default: icssg1-mii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00f8, PIN_INPUT, 1) /* (V9) PRG1_PRU0_GPO16.PR1_MII_MT0_CLK */
+			AM64X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (Y9) PRG1_PRU0_GPO15.PR1_MII0_TXEN */
+			AM64X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (AA9) PRG1_PRU0_GPO14.PR1_MII0_TXD3 */
+			AM64X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (W9) PRG1_PRU0_GPO13.PR1_MII0_TXD2 */
+			AM64X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (U9) PRG1_PRU0_GPO12.PR1_MII0_TXD1 */
+			AM64X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA8) PRG1_PRU0_GPO11.PR1_MII0_TXD0 */
+			AM64X_IOPAD(0x00c8, PIN_INPUT, 1) /* (Y8) PRG1_PRU0_GPO4.PR1_MII0_RXDV */
+			AM64X_IOPAD(0x00d0, PIN_INPUT, 1) /* (AA7) PRG1_PRU0_GPO6.PR1_MII_MR0_CLK */
+			AM64X_IOPAD(0x00c4, PIN_INPUT, 1) /* (V8) PRG1_PRU0_GPO3.PR1_MII0_RXD3 */
+			AM64X_IOPAD(0x00c0, PIN_INPUT, 1) /* (W8) PRG1_PRU0_GPO2.PR1_MII0_RXD2 */
+			AM64X_IOPAD(0x00cc, PIN_INPUT, 1) /* (V13) PRG1_PRU0_GPO5.PR1_MII0_RXER */
+			AM64X_IOPAD(0x00bc, PIN_INPUT, 1) /* (U8) PRG1_PRU0_GPO1.PR1_MII0_RXD1 */
+			AM64X_IOPAD(0x00b8, PIN_INPUT, 1) /* (Y7) PRG1_PRU0_GPO0.PR1_MII0_RXD0 */
+			AM64X_IOPAD(0x00d8, PIN_INPUT, 1) /* (W13) PRG1_PRU0_GPO8.PR1_MII0_RXLINK */
+		>;
+	};
+
+	icssg1_mii2_pins_default: icssg1-mii2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0148, PIN_INPUT, 1) /* (Y10) PRG1_PRU1_GPO16.PR1_MII_MT1_CLK */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 0) /* (Y11) PRG1_PRU1_GPO15.PR1_MII1_TXEN */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AA11) PRG1_PRU1_GPO14.PR1_MII1_TXD3 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (U10) PRG1_PRU1_GPO13.PR1_MII1_TXD2 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (V10) PRG1_PRU1_GPO12.PR1_MII1_TXD1 */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AA10) PRG1_PRU1_GPO11.PR1_MII1_TXD0 */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 1) /* (W12) PRG1_PRU1_GPO4.PR1_MII1_RXDV */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 1) /* (U11) PRG1_PRU1_GPO6.PR1_MII_MR1_CLK */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 1) /* (Y12) PRG1_PRU1_GPO3.PR1_MII1_RXD3 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 1) /* (AA12) PRG1_PRU1_GPO2.PR1_MII1_RXD2 */
+			AM64X_IOPAD(0x011c, PIN_INPUT, 1) /* (AA13) PRG1_PRU1_GPO5.PR1_MII1_RXER */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 1) /* (V11) PRG1_PRU1_GPO1.PR1_MII1_RXD1 */
+			AM64X_IOPAD(0x0108, PIN_INPUT, 1) /* (W11) PRG1_PRU1_GPO0.PR1_MII1_RXD0 */
+			AM64X_IOPAD(0x0128, PIN_INPUT, 1) /* (U12) PRG1_PRU1_GPO8.PR1_MII1_RXLINK */
+		>;
+	};
+};
+
+&cpsw3g {
+	pinctrl-0 = <&rgmii1_pins_default>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mdio_mux_1 {
+	status = "disabled";
+};
+
+&icssg1_eth {
+	pinctrl-0 = <&icssg1_mii1_pins_default &icssg1_mii2_pins_default>;
+};
+
+&icssg1_emac0 {
+	phy-mode = "mii";
+};
+
+&icssg1_emac1 {
+	status = "okay";
+	phy-handle = <&icssg1_phy2>;
+	phy-mode = "mii";
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am642-evm-nand.dtso b/dts/upstream/src/arm64/ti/k3-am642-evm-nand.dtso
new file mode 100644
index 00000000000..f08c0e272b5
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am642-evm-nand.dtso
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT overlay for HSE NAND expansion card on AM642 EVM
+ *
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "k3-pinctrl.h"
+
+&main_pmx0 {
+	gpmc0_pins_default: gpmc0-pins-default {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */
+			AM64X_IOPAD(0x003c, PIN_INPUT, 0) /* (T20) GPMC0_AD0 */
+			AM64X_IOPAD(0x0040, PIN_INPUT, 0) /* (U21) GPMC0_AD1 */
+			AM64X_IOPAD(0x0064, PIN_INPUT, 0) /* (R16) GPMC0_AD10 */
+			AM64X_IOPAD(0x0068, PIN_INPUT, 0) /* (W20) GPMC0_AD11 */
+			AM64X_IOPAD(0x006c, PIN_INPUT, 0) /* (W21) GPMC0_AD12 */
+			AM64X_IOPAD(0x0070, PIN_INPUT, 0) /* (V18) GPMC0_AD13 */
+			AM64X_IOPAD(0x0074, PIN_INPUT, 0) /* (Y21) GPMC0_AD14 */
+			AM64X_IOPAD(0x0078, PIN_INPUT, 0) /* (Y20) GPMC0_AD15 */
+			AM64X_IOPAD(0x0044, PIN_INPUT, 0) /* (T18) GPMC0_AD2 */
+			AM64X_IOPAD(0x0048, PIN_INPUT, 0) /* (U20) GPMC0_AD3 */
+			AM64X_IOPAD(0x004c, PIN_INPUT, 0) /* (U18) GPMC0_AD4 */
+			AM64X_IOPAD(0x0050, PIN_INPUT, 0) /* (U19) GPMC0_AD5 */
+			AM64X_IOPAD(0x0054, PIN_INPUT, 0) /* (V20) GPMC0_AD6 */
+			AM64X_IOPAD(0x0058, PIN_INPUT, 0) /* (V21) GPMC0_AD7 */
+			AM64X_IOPAD(0x005c, PIN_INPUT, 0) /* (V19) GPMC0_AD8 */
+			AM64X_IOPAD(0x0060, PIN_INPUT, 0) /* (T17) GPMC0_AD9 */
+			AM64X_IOPAD(0x0098, PIN_INPUT_PULLUP, 0) /* (W19) GPMC0_WAIT0 */
+			AM64X_IOPAD(0x009c, PIN_INPUT_PULLUP, 0) /* (Y18) GPMC0_WAIT1 */
+			AM64X_IOPAD(0x00a8, PIN_OUTPUT_PULLUP, 0) /* (R19) GPMC0_CSn0 */
+			AM64X_IOPAD(0x00ac, PIN_OUTPUT_PULLUP, 0) /* (R20) GPMC0_CSn1 */
+			AM64X_IOPAD(0x00b0, PIN_OUTPUT_PULLUP, 0) /* (P19) GPMC0_CSn2 */
+			AM64X_IOPAD(0x00b4, PIN_OUTPUT_PULLUP, 0) /* (R21) GPMC0_CSn3 */
+			AM64X_IOPAD(0x007c, PIN_OUTPUT, 0) /* (R17) GPMC0_CLK */
+			AM64X_IOPAD(0x0084, PIN_OUTPUT, 0) /* (P16) GPMC0_ADVn_ALE */
+			AM64X_IOPAD(0x0088, PIN_OUTPUT, 0) /* (R18) GPMC0_OEn_REn */
+			AM64X_IOPAD(0x008c, PIN_OUTPUT, 0) /* (T21) GPMC0_WEn */
+			AM64X_IOPAD(0x0090, PIN_OUTPUT, 0) /* (P17) GPMC0_BE0n_CLE */
+			AM64X_IOPAD(0x00a0, PIN_OUTPUT_PULLUP, 0) /* (N16) GPMC0_WPn */
+			AM64X_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (N17) GPMC0_DIR */
+		>;
+	};
+};
+
+&main_gpio0 {
+	gpio0-36 {
+		bootph-all;
+		gpio-hog;
+		gpios = <36 0>;
+		input;
+		line-name = "GPMC0_MUX_DIR";
+	};
+};
+
+&elm0 {
+	bootph-all;
+	status = "okay";
+};
+
+&gpmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc0_pins_default>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	nand@0,0 {
+		compatible = "ti,am64-nand";
+		reg = <0 0 64>;		/* device IO registers */
+		interrupt-parent = <&gpmc0>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc0 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-polled";
+		ti,nand-ecc-opt = "bch8";	/* BCH8: Bootrom limitation */
+		ti,elm-id = <&elm0>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <25>;
+		gpmc,adv-wr-off-ns = <25>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <3>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				bootph-all;
+				label = "NAND.tiboot3";
+				reg = <0x00000000 0x00200000>;	/* 2M */
+			};
+			partition@200000 {
+				bootph-all;
+				label = "NAND.tispl";
+				reg = <0x00200000 0x00200000>;	/* 2M */
+			};
+			partition@400000 {
+				bootph-all;
+				label = "NAND.tiboot3.backup";	/* 2M */
+				reg = <0x00400000 0x00200000>;	/* BootROM looks at 4M */
+			};
+			partition@600000 {
+				bootph-all;
+				label = "NAND.u-boot";
+				reg = <0x00600000 0x00400000>;	/* 4M */
+			};
+			partition@a00000 {
+				bootph-all;
+				label = "NAND.u-boot-env";
+				reg = <0x00a00000 0x00040000>;	/* 256K */
+			};
+			partition@a40000 {
+				bootph-all;
+				label = "NAND.u-boot-env.backup";
+				reg = <0x00a40000 0x00040000>;	/* 256K */
+			};
+			partition@a80000 {
+				bootph-all;
+				label = "NAND.file-system";
+				reg = <0x00a80000 0x3f580000>;
+			};
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am642-evm.dts b/dts/upstream/src/arm64/ti/k3-am642-evm.dts
index e20e4ffd0f1..6bb1ad2e56e 100644
--- a/dts/upstream/src/arm64/ti/k3-am642-evm.dts
+++ b/dts/upstream/src/arm64/ti/k3-am642-evm.dts
@@ -466,6 +466,12 @@
 			AM64X_IOPAD(0x00f4, PIN_INPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */
 		>;
 	};
+
+	icssg1_iep0_pins_default: icssg1-iep0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0104, PIN_OUTPUT, 2) /* (W7) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */
+		>;
+	};
 };
 
 &main_uart0 {
@@ -817,3 +823,12 @@
 		rx-internal-delay-ps = <2000>;
 	};
 };
+
+&gpmc0 {
+	ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */
+};
+
+&icssg1_iep0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg1_iep0_pins_default>;
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am642-hummingboard-t.dts b/dts/upstream/src/arm64/ti/k3-am642-hummingboard-t.dts
index 234d76e4e94..5b5e9eeec5a 100644
--- a/dts/upstream/src/arm64/ti/k3-am642-hummingboard-t.dts
+++ b/dts/upstream/src/arm64/ti/k3-am642-hummingboard-t.dts
@@ -282,7 +282,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart3_default_pins>;
 	uart-has-rtscts;
-	rs485-rts-active-low;
 	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-pcie-usb2.dtso b/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-pcie-usb2.dtso
new file mode 100644
index 00000000000..7a5ce4bc02f
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-pcie-usb2.dtso
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DT overlay for PCIe support (limits USB to 2.0/high-speed)
+ *
+ * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com
+ * Author: Matt McKee <mmckee@phytec.com>
+ *
+ * Copyright (C) 2024 PHYTEC America, LLC - https://www.phytec.com
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-cadence.h>
+
+#include "k3-pinctrl.h"
+#include "k3-serdes.h"
+
+&{/} {
+	pcie_refclk0: pcie-refclk0 {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_usb_sel_pins_default>;
+		clocks = <&serdes_refclk>;
+		#clock-cells = <0>;
+		enable-gpios = <&main_gpio1 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&main_pmx0 {
+	pcie_usb_sel_pins_default: pcie-usb-sel-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x017c, PIN_OUTPUT, 7)	/* (T1) PRG0_PRU0_GPO7.GPIO1_7 */
+		>;
+	};
+
+	pcie_pins_default: pcie-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0098, PIN_OUTPUT, 7)	/* (W19) GPMC0_WAIT0.GPIO0_37 */
+		>;
+	};
+};
+
+&pcie0_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins_default>;
+	reset-gpios = <&main_gpio0 37 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_usb_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+	status = "okay";
+};
+
+&serdes0_pcie_usb_link {
+	cdns,phy-type = <PHY_TYPE_PCIE>;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
+};
+
+&serdes0 {
+	assigned-clock-parents = <&pcie_refclk0>, <&pcie_refclk0>, <&pcie_refclk0>;
+};
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+/*
+ * Assign pcie_refclk0 to serdes_wiz0 as ext_ref_clk.
+ * This makes sure that the clock generator gets enabled at the right time.
+ */
+&serdes_wiz0 {
+	clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&pcie_refclk0>;
+};
+
+&usbss0 {
+	ti,usb2-only;
+};
+
+&usb0 {
+	maximum-speed = "high-speed";
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts b/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
index 6df331ccb97..30729b49dd6 100644
--- a/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
@@ -190,18 +190,6 @@
 		>;
 	};
 
-	pcie_usb_sel_pins_default: pcie-usb-sel-default-pins {
-		pinctrl-single,pins = <
-			AM64X_IOPAD(0x017c, PIN_OUTPUT, 7)	/* (T1) PRG0_PRU0_GPO7.GPIO1_7 */
-		>;
-	};
-
-	pcie0_pins_default: pcie0-default-pins {
-		pinctrl-single,pins = <
-			AM64X_IOPAD(0x0098, PIN_OUTPUT, 7)	/* (W19) GPMC0_WAIT0.GPIO0_37 */
-		>;
-	};
-
 	user_leds_pins_default: user-leds-default-pins {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x003c, PIN_OUTPUT, 7)	/* (T20) GPMC0_AD0.GPIO0_15 */
diff --git a/dts/upstream/src/arm64/ti/k3-am642-sk.dts b/dts/upstream/src/arm64/ti/k3-am642-sk.dts
index 5b028b3a319..44ecbcf1c84 100644
--- a/dts/upstream/src/arm64/ti/k3-am642-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am642-sk.dts
@@ -430,6 +430,18 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
 	};
+
+	/* SoC power supply temperature */
+	tmp100@48 {
+		compatible = "ti,tmp100";
+		reg = <0x48>;
+	};
+
+	/* DDR power supply temperature */
+	tmp100@49 {
+		compatible = "ti,tmp100";
+		reg = <0x49>;
+	};
 };
 
 /* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
diff --git a/dts/upstream/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/dts/upstream/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index 1f4dc5ad169..c40ad67cee0 100644
--- a/dts/upstream/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ b/dts/upstream/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
  */
 
 /dts-v1/;
diff --git a/dts/upstream/src/arm64/ti/k3-am642-tqma64xxl.dtsi b/dts/upstream/src/arm64/ti/k3-am642-tqma64xxl.dtsi
index 6c785eff7d2..828d815d6bd 100644
--- a/dts/upstream/src/arm64/ti/k3-am642-tqma64xxl.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am642-tqma64xxl.dtsi
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
  */
 
 #include "k3-am642.dtsi"
diff --git a/dts/upstream/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi b/dts/upstream/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
index ef7897763ef..0a29ed17221 100644
--- a/dts/upstream/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -73,3 +73,15 @@
 		    "rx0", "rx1",
 		    "rxmgm0", "rxmgm1";
 };
+
+&icssg0_iep0 {
+	interrupt-parent = <&icssg0_intc>;
+	interrupts = <7 7 7>;
+	interrupt-names = "iep_cap_cmp";
+};
+
+&icssg0_iep1 {
+	interrupt-parent = <&icssg0_intc>;
+	interrupts = <56 8 8>;
+	interrupt-names = "iep_cap_cmp";
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am65-main.dtsi b/dts/upstream/src/arm64/ti/k3-am65-main.dtsi
index ed71561c5bd..1af3dedde1f 100644
--- a/dts/upstream/src/arm64/ti/k3-am65-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am65-main.dtsi
@@ -1185,6 +1185,9 @@
 			      <0x22400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-pru0_0-fw";
+			interrupt-parent = <&icssg0_intc>;
+			interrupts = <16 2 2>;
+			interrupt-names = "vring";
 		};
 
 		rtu0_0: rtu@4000 {
@@ -1194,6 +1197,9 @@
 			      <0x23400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-rtu0_0-fw";
+			interrupt-parent = <&icssg0_intc>;
+			interrupts = <20 4 4>;
+			interrupt-names = "vring";
 		};
 
 		tx_pru0_0: txpru@a000 {
@@ -1212,6 +1218,9 @@
 			      <0x24400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-pru0_1-fw";
+			interrupt-parent = <&icssg0_intc>;
+			interrupts = <18 3 3>;
+			interrupt-names = "vring";
 		};
 
 		rtu0_1: rtu@6000 {
@@ -1221,6 +1230,9 @@
 			      <0x23c00 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-rtu0_1-fw";
+			interrupt-parent = <&icssg0_intc>;
+			interrupts = <22 5 5>;
+			interrupt-names = "vring";
 		};
 
 		tx_pru0_1: txpru@c000 {
@@ -1339,6 +1351,9 @@
 			      <0x22400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-pru1_0-fw";
+			interrupt-parent = <&icssg1_intc>;
+			interrupts = <16 2 2>;
+			interrupt-names = "vring";
 		};
 
 		rtu1_0: rtu@4000 {
@@ -1348,6 +1363,9 @@
 			      <0x23400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-rtu1_0-fw";
+			interrupt-parent = <&icssg1_intc>;
+			interrupts = <20 4 4>;
+			interrupt-names = "vring";
 		};
 
 		tx_pru1_0: txpru@a000 {
@@ -1366,6 +1384,9 @@
 			      <0x24400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-pru1_1-fw";
+			interrupt-parent = <&icssg1_intc>;
+			interrupts = <18 3 3>;
+			interrupt-names = "vring";
 		};
 
 		rtu1_1: rtu@6000 {
@@ -1375,6 +1396,9 @@
 			      <0x23c00 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-rtu1_1-fw";
+			interrupt-parent = <&icssg1_intc>;
+			interrupts = <22 5 5>;
+			interrupt-names = "vring";
 		};
 
 		tx_pru1_1: txpru@c000 {
@@ -1493,6 +1517,9 @@
 			      <0x22400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-pru2_0-fw";
+			interrupt-parent = <&icssg2_intc>;
+			interrupts = <16 2 2>;
+			interrupt-names = "vring";
 		};
 
 		rtu2_0: rtu@4000 {
@@ -1502,6 +1529,9 @@
 			      <0x23400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-rtu2_0-fw";
+			interrupt-parent = <&icssg2_intc>;
+			interrupts = <20 4 4>;
+			interrupt-names = "vring";
 		};
 
 		tx_pru2_0: txpru@a000 {
@@ -1520,6 +1550,9 @@
 			      <0x24400 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-pru2_1-fw";
+			interrupt-parent = <&icssg2_intc>;
+			interrupts = <18 3 3>;
+			interrupt-names = "vring";
 		};
 
 		rtu2_1: rtu@6000 {
@@ -1529,6 +1562,9 @@
 			      <0x23c00 0x100>;
 			reg-names = "iram", "control", "debug";
 			firmware-name = "am65x-rtu2_1-fw";
+			interrupt-parent = <&icssg2_intc>;
+			interrupts = <22 5 5>;
+			interrupt-names = "vring";
 		};
 
 		tx_pru2_1: txpru@c000 {
diff --git a/dts/upstream/src/arm64/ti/k3-am65-mcu.dtsi b/dts/upstream/src/arm64/ti/k3-am65-mcu.dtsi
index 8feab931764..43c6118d2bf 100644
--- a/dts/upstream/src/arm64/ti/k3-am65-mcu.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am65-mcu.dtsi
@@ -6,13 +6,17 @@
  */
 
 &cbass_mcu {
-	mcu_conf: scm-conf@40f00000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x0 0x40f00000 0x0 0x20000>;
+	mcu_conf: bus@40f00000 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x40f00000 0x20000>;
 
+		cpsw_mac_syscon: ethernet-mac-syscon@200 {
+			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
+			reg = <0x200 0x8>;
+		};
+
 		phy_gmii_sel: phy@4040 {
 			compatible = "ti,am654-phy-gmii-sel";
 			reg = <0x4040 0x4>;
@@ -358,7 +362,7 @@
 				reg = <1>;
 				ti,mac-only;
 				label = "port1";
-				ti,syscon-efuse = <&mcu_conf 0x200>;
+				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
 				phys = <&phy_gmii_sel 1>;
 			};
 		};
diff --git a/dts/upstream/src/arm64/ti/k3-am654-base-board.dts b/dts/upstream/src/arm64/ti/k3-am654-base-board.dts
index aba0c52b121..aa7139cc8a9 100644
--- a/dts/upstream/src/arm64/ti/k3-am654-base-board.dts
+++ b/dts/upstream/src/arm64/ti/k3-am654-base-board.dts
@@ -33,6 +33,7 @@
 
 	memory@80000000 {
 		device_type = "memory";
+		bootph-all;
 		/* 4G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
 		      <0x00000008 0x80000000 0x00000000 0x80000000>;
diff --git a/dts/upstream/src/arm64/ti/k3-am68-sk-base-board.dts b/dts/upstream/src/arm64/ti/k3-am68-sk-base-board.dts
index d743f023cdd..90dbe31c5b8 100644
--- a/dts/upstream/src/arm64/ti/k3-am68-sk-base-board.dts
+++ b/dts/upstream/src/arm64/ti/k3-am68-sk-base-board.dts
@@ -414,6 +414,82 @@
 	pinctrl-0 = <&wkup_uart0_pins_default>;
 };
 
+&wkup_i2c0 {
+	bootph-all;
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	status = "okay";
+
+	lp8733: pmic@60 {
+		compatible = "ti,lp8733";
+		reg = <0x60>;
+		buck0-in-supply = <&vsys_3v3>;
+		buck1-in-supply = <&vsys_3v3>;
+		ldo0-in-supply = <&vsys_3v3>;
+		ldo1-in-supply = <&vsys_3v3>;
+
+		lp8733_regulators: regulators {
+			lp8733_buck0_reg: buck0 {
+				/* FB_B0 -> LP8733-BUCK1 - VDD_MCU_0V85 */
+				regulator-name = "lp8733-buck0";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8733_buck1_reg: buck1 {
+				/* FB_B1 -> LP8733-BUCK2 - VDD_DDR_1V1 */
+				regulator-name = "lp8733-buck1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8733_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8733-LDO1 - VDA_DLL_0V8 */
+				regulator-name = "lp8733-ldo0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8733_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8733-LDO2 - VDA_LN_1V8 */
+				regulator-name = "lp8733-ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	tps62873a: regulator@40 {
+		compatible = "ti,tps62873";
+		reg = <0x40>;
+		bootph-pre-ram;
+		regulator-name = "VDD_CPU_AVS";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <900000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	tps62873b: regulator@43 {
+		compatible = "ti,tps62873";
+		reg = <0x43>;
+		regulator-name = "VDD_CORE_0V8";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
 &mcu_uart0 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/dts/upstream/src/arm64/ti/k3-am68-sk-som.dtsi b/dts/upstream/src/arm64/ti/k3-am68-sk-som.dtsi
index 0f4a5da0ebc..5c66e0ec6e8 100644
--- a/dts/upstream/src/arm64/ti/k3-am68-sk-som.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am68-sk-som.dtsi
@@ -11,9 +11,10 @@
 / {
 	memory@80000000 {
 		device_type = "memory";
+		bootph-all;
 		/* 16 GB RAM */
-		reg = <0x00 0x80000000 0x00 0x80000000>,
-		      <0x08 0x80000000 0x03 0x80000000>;
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000003 0x80000000>;
 	};
 
 	reserved_memory: reserved-memory {
@@ -130,6 +131,25 @@
 	};
 };
 
+&wkup_pmx0 {
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
+			J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
+			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */
+			J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */
+		>;
+	};
+};
+
 &wkup_pmx2 {
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -152,6 +172,68 @@
 	};
 };
 
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			bootph-all;
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@740000 {
+				label = "ospi.env.backup";
+				reg = <0x740000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				bootph-pre-ram;
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
 &mailbox0_cluster0 {
 	status = "okay";
 	interrupts = <436>;
diff --git a/dts/upstream/src/arm64/ti/k3-am69-sk.dts b/dts/upstream/src/arm64/ti/k3-am69-sk.dts
index d88651c297a..3f655852244 100644
--- a/dts/upstream/src/arm64/ti/k3-am69-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-am69-sk.dts
@@ -35,8 +35,8 @@
 		device_type = "memory";
 		bootph-all;
 		/* 32G RAM */
-		reg = <0x00 0x80000000 0x00 0x80000000>,
-		      <0x08 0x80000000 0x07 0x80000000>;
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000007 0x80000000>;
 	};
 
 	reserved_memory: reserved-memory {
@@ -814,6 +814,27 @@
 			};
 		};
 	};
+
+	tps62873a: regulator@40 {
+		compatible = "ti,tps62873";
+		reg = <0x40>;
+		bootph-pre-ram;
+		regulator-name = "VDD_CPU_AVS";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <900000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	tps62873b: regulator@43 {
+		compatible = "ti,tps62873";
+		reg = <0x43>;
+		regulator-name = "VDD_CORE_0V8";
+		regulator-min-microvolt = <760000>;
+		regulator-max-microvolt = <840000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &wkup_gpio0 {
@@ -1203,3 +1224,65 @@
 		};
 	};
 };
+
+&serdes_ln_ctrl {
+	idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
+		      <J784S4_SERDES0_LANE2_PCIE3_LANE0>, <J784S4_SERDES0_LANE3_USB>,
+			<J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
+			<J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>;
+};
+
+&serdes_wiz0 {
+	status = "okay";
+};
+
+&serdes0 {
+	status = "okay";
+
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <3>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>, <&serdes_wiz0 3>;
+	};
+};
+
+&serdes_wiz1 {
+	status = "okay";
+};
+
+&serdes1 {
+	status = "okay";
+
+	serdes1_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <4>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>, <&serdes_wiz1 3>, <&serdes_wiz1 4>;
+	};
+};
+
+&pcie0_rc {
+	status = "okay";
+	reset-gpios = <&exp1 4 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+};
+
+&pcie1_rc {
+	status = "okay";
+	reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie3_rc {
+	status = "okay";
+	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-eth-phy.dtso b/dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-eth-phy.dtso
new file mode 100644
index 00000000000..356c82bbe14
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-eth-phy.dtso
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023 PHYTEC America, LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ *
+ * Copyright (C) 2024 PHYTEC America, LLC
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&cpsw3g_phy1 {
+	status = "disabled";
+};
+
+&cpsw_port1 {
+	status = "disabled";
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-rtc.dtso b/dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-rtc.dtso
new file mode 100644
index 00000000000..8b24191f594
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-rtc.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023 PHYTEC America, LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ *
+ * Copyright (C) 2024 PHYTEC America, LLC
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&i2c_som_rtc {
+	status = "disabled";
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-spi-nor.dtso b/dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-spi-nor.dtso
new file mode 100644
index 00000000000..cc0cf269b6e
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am6xx-phycore-disable-spi-nor.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023 PHYTEC America, LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ *
+ * Copyright (C) 2024 PHYTEC America, LLC
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&serial_flash {
+	status = "disabled";
+};
diff --git a/dts/upstream/src/arm64/ti/k3-am6xx-phycore-qspi-nor.dtso b/dts/upstream/src/arm64/ti/k3-am6xx-phycore-qspi-nor.dtso
new file mode 100644
index 00000000000..969dfebcd63
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-am6xx-phycore-qspi-nor.dtso
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Nathan Morrisson <nmorrisson@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "k3-pinctrl.h"
+
+&serial_flash {
+	spi-tx-bus-width = <1>;
+	spi-rx-bus-width = <4>;
+};
diff --git a/dts/upstream/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
index fccaabfb134..5097d192c2b 100644
--- a/dts/upstream/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
@@ -164,12 +164,16 @@
 		ti,timer-pwm;
 	};
 
-	mcu_conf: syscon@40f00000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x00 0x40f00000 0x00 0x20000>;
+	mcu_conf: bus@40f00000 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x00 0x00 0x40f00000 0x20000>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		cpsw_mac_syscon: ethernet-mac-syscon@200 {
+			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
+			reg = <0x200 0x8>;
+		};
 
 		phy_gmii_sel: phy@4040 {
 			compatible = "ti,am654-phy-gmii-sel";
@@ -420,7 +424,7 @@
 				reg = <1>;
 				ti,mac-only;
 				label = "port1";
-				ti,syscon-efuse = <&mcu_conf 0x200>;
+				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
 				phys = <&phy_gmii_sel 1>;
 			};
 		};
diff --git a/dts/upstream/src/arm64/ti/k3-j7200-som-p0.dtsi b/dts/upstream/src/arm64/ti/k3-j7200-som-p0.dtsi
index 7e6a584ac6f..21fe194a576 100644
--- a/dts/upstream/src/arm64/ti/k3-j7200-som-p0.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j7200-som-p0.dtsi
@@ -12,9 +12,10 @@
 / {
 	memory@80000000 {
 		device_type = "memory";
+		bootph-all;
 		/* 4G RAM */
-		reg = <0x00 0x80000000 0x00 0x80000000>,
-		      <0x08 0x80000000 0x00 0x80000000>;
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
 	};
 
 	reserved_memory: reserved-memory {
diff --git a/dts/upstream/src/arm64/ti/k3-j721e-common-proc-board-infotainment.dtso b/dts/upstream/src/arm64/ti/k3-j721e-common-proc-board-infotainment.dtso
new file mode 100644
index 00000000000..65a7e54f088
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-j721e-common-proc-board-infotainment.dtso
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Infotainment Expansion Board for j721e-evm
+ * User Guide: <https://www.ti.com/lit/ug/spruit0a/spruit0a.pdf>
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		ddc-i2c-bus = <&main_i2c1>;
+		digital;
+		/* P12 - HDMI_HPD */
+		hpd-gpios = <&exp6 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-bridge {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "ti,tfp410";
+		/* P10 - HDMI_PDn */
+		powerdown-gpios = <&exp6 8 GPIO_ACTIVE_LOW>;
+
+		port@0 {
+			reg = <0>;
+
+			tfp410_in: endpoint {
+				remote-endpoint = <&dpi_out0>;
+				pclk-sample = <1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tfp410_out: endpoint {
+				remote-endpoint =
+					<&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	main_i2c1_exp6_pins_default: main-i2c1-exp6-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x264, PIN_INPUT, 7) /* (T29) MMC2_DAT2.GPIO1_24 */
+		>;
+	};
+
+	dss_vout0_pins_default: dss-vout0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */
+			J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */
+			J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */
+			J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */
+			J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */
+			J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */
+			J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */
+			J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */
+			J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23)  PRG1_PRU1_GPO8.VOUT0_DATA8 */
+			J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */
+			J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */
+			J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */
+			J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */
+			J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */
+			J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */
+			J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */
+			J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */
+			J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */
+			J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */
+			J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */
+			J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */
+			J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */
+			J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */
+			J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */
+			J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */
+			J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */
+			J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */
+			J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */
+		>;
+	};
+};
+
+&exp1 {
+	p14-hog {
+		/* P14 - VINOUT_MUX_SEL0 */
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "VINOUT_MUX_SEL0";
+	};
+
+	p15-hog {
+		/* P15 - VINOUT_MUX_SEL1 */
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "VINOUT_MUX_SEL1";
+	};
+};
+
+&main_i2c1 {
+	/* i2c1 is used for DVI DDC, so we need to use 100kHz */
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	exp6: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_i2c1_exp6_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		p11-hog {
+			/* P11 - HDMI_DDC_OE */
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "HDMI_DDC_OE";
+		};
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout0_pins_default>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+
+		dpi_out0: endpoint {
+			remote-endpoint = <&tfp410_in>;
+		};
+	};
+};
diff --git a/dts/upstream/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
index 9349ae07c04..6b6ef6a3061 100644
--- a/dts/upstream/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
@@ -34,13 +34,17 @@
 		};
 	};
 
-	mcu_conf: syscon@40f00000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x0 0x40f00000 0x0 0x20000>;
+	mcu_conf: bus@40f00000 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x40f00000 0x20000>;
 
+		cpsw_mac_syscon: ethernet-mac-syscon@200 {
+			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
+			reg = <0x200 0x8>;
+		};
+
 		phy_gmii_sel: phy@4040 {
 			compatible = "ti,am654-phy-gmii-sel";
 			reg = <0x4040 0x4>;
@@ -546,7 +550,7 @@
 				reg = <1>;
 				ti,mac-only;
 				label = "port1";
-				ti,syscon-efuse = <&mcu_conf 0x200>;
+				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
 				phys = <&phy_gmii_sel 1>;
 			};
 		};
diff --git a/dts/upstream/src/arm64/ti/k3-j721e-sk.dts b/dts/upstream/src/arm64/ti/k3-j721e-sk.dts
index 0c4575ad8d7..89fbfb21e5d 100644
--- a/dts/upstream/src/arm64/ti/k3-j721e-sk.dts
+++ b/dts/upstream/src/arm64/ti/k3-j721e-sk.dts
@@ -31,6 +31,7 @@
 
 	memory@80000000 {
 		device_type = "memory";
+		bootph-all;
 		/* 4G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
 		      <0x00000008 0x80000000 0x00000000 0x80000000>;
@@ -210,6 +211,42 @@
 			 <3300000 0x1>;
 	};
 
+	transceiver1: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy2 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_mcan0_gpio_pins_default>;
+		standby-gpios = <&main_gpio0 65 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver3: can-phy3 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_mcan5_gpio_pins_default>;
+		standby-gpios = <&main_gpio0 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver4: can-phy4 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_mcan9_gpio_pins_default>;
+		standby-gpios = <&main_gpio0 67 GPIO_ACTIVE_HIGH>;
+	};
+
 	dp_pwr_3v3: fixedregulator-dp-prw {
 		compatible = "regulator-fixed";
 		regulator-name = "dp-pwr";
@@ -367,6 +404,45 @@
 		>;
 	};
 
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
+			J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
+		>;
+	};
+
+	main_mcan0_gpio_pins_default: main-mcan0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x108, PIN_INPUT, 7) /* (AD27) PRG0_PRU1_GPO2.GPIO0_65 */
+		>;
+	};
+
+	main_mcan5_pins_default: main-mcan5-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x050, PIN_INPUT, 6) /* (AE21) PRG1_PRU0_GPO18.MCAN5_RX */
+			J721E_IOPAD(0x04c, PIN_OUTPUT, 6) /* (AJ21) PRG1_PRU0_GPO17.MCAN5_TX */
+		>;
+	};
+
+	main_mcan5_gpio_pins_default: main-mcan5-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x10c, PIN_INPUT, 7) /* (AC25) PRG0_PRU1_GPO3.GPIO0_66 */
+		>;
+	};
+
+	main_mcan9_pins_default: main-mcan9-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x0d0, PIN_INPUT, 6) /* (AC27) PRG0_PRU0_GPO8.MCAN9_RX */
+			J721E_IOPAD(0x0cc, PIN_OUTPUT, 6) /* (AC28) PRG0_PRU0_GPO7.MCAN9_TX */
+		>;
+	};
+
+	main_mcan9_gpio_pins_default: main-mcan9-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x110, PIN_INPUT, 7) /* (AD29) PRG0_PRU1_GPO4.GPIO0_67 */
+		>;
+	};
+
 	dp0_pins_default: dp0-default-pins {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
@@ -555,6 +631,19 @@
 		>;
 	};
 
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0ac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
+			J721E_WKUP_IOPAD(0x0a8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0bc, PIN_INPUT, 7) /* (F27) WKUP_GPIO0_3 */
+		>;
+	};
+
 	/* Reset for M.2 M Key slot on PCIe1  */
 	mkey_reset_pins_default: mkey-reset-pns-default-pins {
 		pinctrl-single,pins = <
@@ -1108,6 +1197,34 @@
 	num-lanes = <2>;
 };
 
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+	status = "okay";
+};
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&transceiver2>;
+	status = "okay";
+};
+
+&main_mcan5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan5_pins_default>;
+	phys = <&transceiver3>;
+	status = "okay";
+};
+
+&main_mcan9 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan9_pins_default>;
+	phys = <&transceiver4>;
+	status = "okay";
+};
+
 &ufs_wrapper {
 	status = "disabled";
 };
diff --git a/dts/upstream/src/arm64/ti/k3-j721e-som-p0.dtsi b/dts/upstream/src/arm64/ti/k3-j721e-som-p0.dtsi
index 1fae6495db0..5ba947771b8 100644
--- a/dts/upstream/src/arm64/ti/k3-j721e-som-p0.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j721e-som-p0.dtsi
@@ -12,6 +12,7 @@
 / {
 	memory@80000000 {
 		device_type = "memory";
+		bootph-all;
 		/* 4G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
 		      <0x00000008 0x80000000 0x00000000 0x80000000>;
diff --git a/dts/upstream/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
index 5ccb04c7c46..8feb42c89e4 100644
--- a/dts/upstream/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -139,13 +139,17 @@
 		ti,interrupt-ranges = <16 960 16>;
 	};
 
-	mcu_conf: syscon@40f00000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x0 0x40f00000 0x0 0x20000>;
+	mcu_conf: bus@40f00000 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x40f00000 0x20000>;
 
+		cpsw_mac_syscon: ethernet-mac-syscon@200 {
+			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
+			reg = <0x200 0x8>;
+		};
+
 		phy_gmii_sel: phy@4040 {
 			compatible = "ti,am654-phy-gmii-sel";
 			reg = <0x4040 0x4>;
@@ -544,7 +548,7 @@
 				reg = <1>;
 				ti,mac-only;
 				label = "port1";
-				ti,syscon-efuse = <&mcu_conf 0x200>;
+				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
 				phys = <&phy_gmii_sel 1>;
 			};
 		};
diff --git a/dts/upstream/src/arm64/ti/k3-j721s2-som-p0.dtsi b/dts/upstream/src/arm64/ti/k3-j721s2-som-p0.dtsi
index 623c8421525..82aacc01e8f 100644
--- a/dts/upstream/src/arm64/ti/k3-j721s2-som-p0.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j721s2-som-p0.dtsi
@@ -13,9 +13,10 @@
 / {
 	memory@80000000 {
 		device_type = "memory";
+		bootph-all;
 		/* 16 GB RAM */
-		reg = <0x00 0x80000000 0x00 0x80000000>,
-		      <0x08 0x80000000 0x03 0x80000000>;
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000003 0x80000000>;
 	};
 
 	/* Reserving memory regions still pending */
diff --git a/dts/upstream/src/arm64/ti/k3-j722s-evm.dts b/dts/upstream/src/arm64/ti/k3-j722s-evm.dts
index bf3c246d13d..dd3b5f7039d 100644
--- a/dts/upstream/src/arm64/ti/k3-j722s-evm.dts
+++ b/dts/upstream/src/arm64/ti/k3-j722s-evm.dts
@@ -9,7 +9,9 @@
 /dts-v1/;
 
 #include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
 #include "k3-j722s.dtsi"
+#include "k3-serdes.h"
 
 / {
 	compatible = "ti,j722s-evm", "ti,j722s";
@@ -105,6 +107,15 @@
 			 <3300000 0x1>;
 	};
 
+	vsys_io_3v3: regulator-vsys-io-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vsys_io_1v8: regulator-vsys-io-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys_io_1v8";
@@ -122,6 +133,35 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	codec_audio: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "J722S-EVM";
+		simple-audio-card,widgets =
+			"Headphone",	"Headphone Jack",
+			"Line",		"Line In",
+			"Microphone",	"Microphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In",
+			"MIC3R",		"Microphone Jack",
+			"Microphone Jack",	"Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&audio_refclk1>;
+		};
+	};
 };
 
 &main_pmx0 {
@@ -202,6 +242,27 @@
 			J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
 		>;
 	};
+
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0258, PIN_INPUT, 0) /* (B27) USB1_DRVVBUS */
+		>;
+	};
+
+	main_mcasp1_pins_default: main-mcasp1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0090, PIN_INPUT, 2) /* (P27) GPMC0_BE0n_CLE.MCASP1_ACLKX */
+			J722S_IOPAD(0x0098, PIN_INPUT, 2) /* (V21) GPMC0_WAIT0.MCASP1_AFSX */
+			J722S_IOPAD(0x008c, PIN_OUTPUT, 2) /* (N23) GPMC0_WEn.MCASP1_AXR0 */
+			J722S_IOPAD(0x0084, PIN_INPUT, 2) /* (N21) GPMC0_ADVn_ALE.MCASP1_AXR2 */
+		>;
+	};
+
+	audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
+		>;
+	};
 };
 
 &cpsw3g {
@@ -277,6 +338,12 @@
 	bootph-all;
 };
 
+&k3_clks {
+	/* Configure AUDIO_EXT_REFCLK1 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_ext_refclk1_pins_default>;
+};
+
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -301,6 +368,48 @@
 				  "PCIe0_1L_RC_RSTz", "PCIe0_1L_PRSNT#",
 				  "ENET1_EXP_SPARE2", "ENET1_EXP_PWRDN",
 				  "PD_I2ENET1_I2CMUX_SELC_IRQ", "ENET1_EXP_RESETZ";
+
+		p05-hog {
+			/* P05 - USB2.0_MUX_SEL */
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-high;
+		};
+
+		p01_hog: p01-hog {
+			/* P01 - TRC_MUX_SEL */
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "TRC_MUX_SEL";
+		};
+
+		p02_hog: p02-hog {
+			/* P02 - MCASP1_FET_SEL */
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "MCASP1_FET_SEL";
+		};
+
+		p13_hog: p13-hog {
+			/* P13 - GPIO_AUD_RSTn */
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "GPIO_AUD_RSTn";
+		};
+	};
+
+	tlv320aic3106: audio-codec@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <1>;  /* 2.0V */
+		AVDD-supply = <&vsys_io_3v3>;
+		IOVDD-supply = <&vsys_io_3v3>;
+		DRVDD-supply = <&vsys_io_3v3>;
+		DVDD-supply = <&vsys_io_1v8>;
 	};
 };
 
@@ -384,3 +493,76 @@
 	status = "okay";
 	bootph-all;
 };
+
+&serdes_ln_ctrl {
+	idle-states = <J722S_SERDES0_LANE0_USB>,
+		      <J722S_SERDES1_LANE0_PCIE0_LANE0>;
+};
+
+&serdes0 {
+	status = "okay";
+	serdes0_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	status = "okay";
+	serdes1_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>;
+	};
+};
+
+&pcie0_rc {
+	reset-gpios = <&exp1 18 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	status = "okay";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp1_pins_default>;
+	op-mode = <0>; /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 2 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+};
diff --git a/dts/upstream/src/arm64/ti/k3-j722s-main.dtsi b/dts/upstream/src/arm64/ti/k3-j722s-main.dtsi
new file mode 100644
index 00000000000..dde4bd5c664
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-j722s-main.dtsi
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree file for the J722S MAIN domain peripherals
+ *
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+/ {
+	serdes_refclk: clk-0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
+
+&cbass_main {
+	serdes_wiz0: phy@f000000 {
+		compatible = "ti,am64-wiz-10g";
+		ranges = <0x0f000000 0x0 0x0f000000 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 279 0>, <&k3_clks 279 1>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <1>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+
+		assigned-clocks = <&k3_clks 279 1>;
+		assigned-clock-parents = <&k3_clks 279 5>;
+
+		serdes0: serdes@f000000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x0f000000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 279 1>,
+						 <&k3_clks 279 1>,
+						 <&k3_clks 279 1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			status = "disabled"; /* Needs lane config */
+		};
+	};
+
+	serdes_wiz1: phy@f010000 {
+		compatible = "ti,am64-wiz-10g";
+		ranges = <0x0f010000 0x0 0x0f010000 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 280 0>, <&k3_clks 280 1>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <1>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+
+		assigned-clocks = <&k3_clks 280 1>;
+		assigned-clock-parents = <&k3_clks 280 5>;
+
+		serdes1: serdes@f010000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x0f010000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz1 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz1 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz1 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz1 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 280 1>,
+						 <&k3_clks 280 1>,
+						 <&k3_clks 280 1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			status = "disabled"; /* Needs lane config */
+		};
+	};
+
+	pcie0_rc: pcie@f102000 {
+		compatible = "ti,j722s-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x0f102000 0x00 0x1000>,
+		      <0x00 0x0f100000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x68000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
+			 <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 259 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>;
+		clock-names = "fck", "pcie_refclk";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb010>;
+		cdns,no-bar-match-nbits = <64>;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		status = "disabled";
+	};
+
+	usbss1: usb@f920000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x0f920000 0x00 0x100>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 3>, <&k3_clks 278 1>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 278 3>; /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 278 4>; /* HF0SC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31200000{
+			compatible = "cdns,usb3";
+			reg = <0x00 0x31200000 0x00 0x10000>,
+			      <0x00 0x31210000 0x00 0x10000>,
+			      <0x00 0x31220000 0x00 0x10000>;
+			reg-names = "otg",
+				    "xhci",
+				    "dev";
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+};
+
+&main_conf {
+	serdes_ln_ctrl: mux-controller@4080 {
+		compatible = "reg-mux";
+		reg = <0x4080 0x14>;
+		#mux-control-cells = <1>;
+		mux-reg-masks = <0x00 0x3>, /* SERDES0 lane0 select */
+				<0x10 0x3>; /* SERDES1 lane0 select */
+	};
+
+	audio_refclk1: clock@82e4 {
+		compatible = "ti,am62-audio-refclk";
+		reg = <0x82e4 0x4>;
+		clocks = <&k3_clks 157 18>;
+		assigned-clocks = <&k3_clks 157 18>;
+		assigned-clock-parents = <&k3_clks 157 33>;
+		#clock-cells = <0>;
+	};
+};
+
+&wkup_conf {
+	pcie0_ctrl: pcie0-ctrl@4070 {
+		compatible = "ti,j784s4-pcie-ctrl", "syscon";
+		reg = <0x4070 0x4>;
+	};
+};
+
+&oc_sram {
+	reg = <0x00 0x70000000 0x00 0x40000>;
+	ranges = <0x00 0x00 0x70000000 0x40000>;
+};
+
+&inta_main_dmss {
+	ti,interrupt-ranges = <7 71 21>;
+};
+
+&main_pmx0 {
+	pinctrl-single,gpio-range =
+		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 72 17 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 101 25 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>;
+
+	main_pmx0_range: gpio-range {
+		#pinctrl-single,gpio-range-cells = <3>;
+	};
+};
+
+&main_gpio0 {
+	gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>,
+			<&main_pmx0 70 72 17>;
+	ti,ngpio = <87>;
+};
+
+&main_gpio1 {
+	gpio-ranges = <&main_pmx0 7 101 25>, <&main_pmx0 42 137 5>,
+			<&main_pmx0 47 143 3>, <&main_pmx0 50 149 2>;
+	ti,ngpio = <73>;
+};
diff --git a/dts/upstream/src/arm64/ti/k3-j722s.dtsi b/dts/upstream/src/arm64/ti/k3-j722s.dtsi
index c75744edb14..14c6c6a332e 100644
--- a/dts/upstream/src/arm64/ti/k3-j722s.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j722s.dtsi
@@ -10,11 +10,133 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
-#include "k3-am62p5.dtsi"
+#include "k3-pinctrl.h"
 
 / {
 	model = "Texas Instruments K3 J722S SoC";
 	compatible = "ti,j722s";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 135 0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 136 0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 137 0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 138 0>;
+		};
+	};
+
+	l2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
 
 	cbass_main: bus@f0000 {
 		compatible = "simple-bus";
@@ -74,16 +196,39 @@
 			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
 			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>,
 			 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>;
-	};
-};
 
-/* Main domain overrides */
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */
+				 <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */
+				 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
+				 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */
+				 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */
+			bootph-all;
+		};
 
-&inta_main_dmss {
-	ti,interrupt-ranges = <7 71 21>;
-};
+		cbass_wakeup: bus@b00000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */
+				 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
+			bootph-all;
+		};
+	};
 
-&oc_sram {
-	reg = <0x00 0x70000000 0x00 0x40000>;
-	ranges = <0x00 0x00 0x70000000 0x40000>;
+	#include "k3-am62p-j722s-common-thermal.dtsi"
 };
+
+/* Include peripherals shared with AM62P */
+#include "k3-am62p-j722s-common-main.dtsi"
+#include "k3-am62p-j722s-common-mcu.dtsi"
+#include "k3-am62p-j722s-common-wakeup.dtsi"
+
+/* Include J722S specific peripherals */
+#include "k3-j722s-main.dtsi"
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso b/dts/upstream/src/arm64/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso
new file mode 100644
index 00000000000..685305092bd
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling PCIE0 and PCIE1 instances in Endpoint Configuration
+ * on J784S4 EVM.
+ *
+ * J784S4 EVM Product Link: https://www.ti.com/tool/J784S4XEVM
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie0_rc {
+	status = "disabled";
+};
+
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie0_ep: pcie-ep@2900000 {
+		compatible = "ti,j784s4-pcie-ep";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 332 0>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes1_pcie0_link>;
+		phy-names = "pcie-phy";
+	};
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j784s4-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 333 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 333 0>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie1_link>;
+		phy-names = "pcie-phy";
+	};
+};
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso b/dts/upstream/src/arm64/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
new file mode 100644
index 00000000000..dcd2c7c39ec
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/**
+ * DT Overlay for CPSW9G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with
+ * J784S4 EVM. The Add-On Ethernet Card has to be connected to ENET Expansion 1 slot on the
+ * board.
+ *
+ * Product Datasheet: https://www.ti.com/lit/ug/spruj74/spruj74.pdf
+ *
+ * Link to QSGMII Daughtercard: https://www.ti.com/tool/J721EXENETXPANEVM
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-pinctrl.h"
+#include "k3-serdes.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@5";
+		ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@6";
+		ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@7";
+		ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@8";
+		ethernet5 = "/bus@100000/ethernet@c200000/ethernet-ports/port@1";
+	};
+};
+
+&main_cpsw0 {
+	status = "okay";
+};
+
+&main_cpsw0_port5 {
+	phy-handle = <&cpsw9g_phy1>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 5>, <&serdes2_qsgmii_link>;
+	phy-names = "mac", "serdes";
+	status = "okay";
+};
+
+&main_cpsw0_port6 {
+	phy-handle = <&cpsw9g_phy2>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 6>, <&serdes2_qsgmii_link>;
+	phy-names = "mac", "serdes";
+	status = "okay";
+};
+
+&main_cpsw0_port7 {
+	phy-handle = <&cpsw9g_phy0>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 7>, <&serdes2_qsgmii_link>;
+	phy-names = "mac", "serdes";
+	status = "okay";
+};
+
+&main_cpsw0_port8 {
+	phy-handle = <&cpsw9g_phy3>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 8>, <&serdes2_qsgmii_link>;
+	phy-names = "mac", "serdes";
+	status = "okay";
+};
+
+&main_cpsw0_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_default_pins>;
+	bus_freq = <1000000>;
+	reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>;
+	reset-post-delay-us = <120000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	cpsw9g_phy0: ethernet-phy@16 {
+		reg = <16>;
+	};
+	cpsw9g_phy1: ethernet-phy@17 {
+		reg = <17>;
+	};
+	cpsw9g_phy2: ethernet-phy@18 {
+		reg = <18>;
+	};
+	cpsw9g_phy3: ethernet-phy@19 {
+		reg = <19>;
+	};
+};
+
+&exp2 {
+	/* Power-up ENET1 EXPANDER PHY. */
+	qsgmii-line-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+
+	/* Toggle MUX2 for MDIO lines */
+	mux-sel-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>, <14 GPIO_ACTIVE_HIGH>, <15 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&main_pmx0 {
+	mdio0_default_pins: mdio0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x05c, PIN_INPUT, 4) /* (AC36) MCASP2_AXR0.MDIO1_MDIO */
+			J784S4_IOPAD(0x058, PIN_INPUT, 4) /* (AE37) MCASP2_AFSX.MDIO1_MDC */
+		>;
+	};
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
+		      <J784S4_SERDES0_LANE2_IP3_UNUSED>, <J784S4_SERDES0_LANE3_USB>,
+		      <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
+		      <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>,
+		      <J784S4_SERDES2_LANE0_QSGMII_LANE5>, <J784S4_SERDES2_LANE1_QSGMII_LANE6>,
+		      <J784S4_SERDES2_LANE2_QSGMII_LANE7>, <J784S4_SERDES2_LANE3_QSGMII_LANE8>;
+};
+
+&serdes_wiz2 {
+	status = "okay";
+};
+
+&serdes2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	serdes2_qsgmii_link: phy@0 {
+		reg = <2>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_QSGMII>;
+		resets = <&serdes_wiz2 3>;
+	};
+};
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso b/dts/upstream/src/arm64/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
new file mode 100644
index 00000000000..d5f8c853192
--- /dev/null
+++ b/dts/upstream/src/arm64/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
+/**
+ * DT Overlay for CPSW9G in dual port fixed-link USXGMII mode using ENET-1
+ * and ENET-2 Expansion slots of J784S4 EVM.
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-serdes.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1";
+		ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2";
+		ethernet3 = "/bus@100000/ethernet@c200000/ethernet-ports/port@1";
+	};
+};
+
+&main_cpsw0 {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&main_cpsw0_port1 {
+	phy-mode = "usxgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 1>, <&serdes2_usxgmii_link>;
+	phy-names = "mac", "serdes";
+	status = "okay";
+	fixed-link {
+		speed = <5000>;
+		full-duplex;
+	};
+};
+
+&main_cpsw0_port2 {
+	phy-mode = "usxgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 2>, <&serdes2_usxgmii_link>;
+	phy-names = "mac", "serdes";
+	status = "okay";
+	fixed-link {
+		speed = <5000>;
+		full-duplex;
+	};
+};
+
+&serdes_wiz2 {
+	assigned-clock-parents = <&k3_clks 406 9>; /* Use 156.25 MHz clock for USXGMII */
+	status = "okay";
+};
+
+&serdes2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	serdes2_usxgmii_link: phy@2 {
+		reg = <2>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USXGMII>;
+		resets = <&serdes_wiz2 3>, <&serdes_wiz2 4>;
+	};
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
+		      <J784S4_SERDES0_LANE2_IP3_UNUSED>, <J784S4_SERDES0_LANE3_USB>,
+		      <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
+		      <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>,
+		      <J784S4_SERDES2_LANE0_IP2_UNUSED>, <J784S4_SERDES2_LANE1_IP2_UNUSED>,
+		      <J784S4_SERDES2_LANE2_QSGMII_LANE1>, <J784S4_SERDES2_LANE3_QSGMII_LANE2>;
+};
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4-evm.dts b/dts/upstream/src/arm64/ti/k3-j784s4-evm.dts
index d511b25d62e..ffa38f41679 100644
--- a/dts/upstream/src/arm64/ti/k3-j784s4-evm.dts
+++ b/dts/upstream/src/arm64/ti/k3-j784s4-evm.dts
@@ -27,14 +27,16 @@
 		mmc1 = &main_sdhci1;
 		i2c0 = &wkup_i2c0;
 		i2c3 = &main_i2c0;
+		ethernet0 = &mcu_cpsw_port1;
+		ethernet1 = &main_cpsw1_port1;
 	};
 
 	memory@80000000 {
 		device_type = "memory";
 		bootph-all;
 		/* 32G RAM */
-		reg = <0x00 0x80000000 0x00 0x80000000>,
-		      <0x08 0x80000000 0x07 0x80000000>;
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000007 0x80000000>;
 	};
 
 	reserved_memory: reserved-memory {
@@ -272,6 +274,59 @@
 			};
 		};
 	};
+
+	transceiver0: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver1: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy2 {
+		/* standby pin has been grounded by default */
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver3: can-phy3 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
+		mux-states = <&mux1 1>;
+	};
+
+	mux1: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp2 14 GPIO_ACTIVE_HIGH>;
+		idle-state = <1>;
+	};
+
+	codec_audio: sound {
+		compatible = "ti,j7200-cpb-audio";
+		model = "j784s4-cpb";
+
+		ti,cpb-mcasp = <&mcasp0>;
+		ti,cpb-codec = <&pcm3168a_1>;
+
+		clocks = <&k3_clks 265 0>, <&k3_clks 265 1>,
+			 <&k3_clks 157 34>, <&k3_clks 157 63>;
+		clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000",
+			      "cpb-codec-scki", "cpb-codec-scki-48000";
+	};
 };
 
 &wkup_gpio0 {
@@ -280,6 +335,30 @@
 
 &main_pmx0 {
 	bootph-all;
+	main_cpsw2g_default_pins: main-cpsw2g-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */
+			J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */
+			J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */
+			J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */
+			J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */
+			J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */
+			J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */
+			J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */
+			J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */
+			J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */
+			J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */
+			J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */
+		>;
+	};
+
+	main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */
+			J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */
+		>;
+	};
+
 	main_uart8_pins_default: main-uart8-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -336,6 +415,49 @@
 			J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */
 		>;
 	};
+
+	main_mcan4_pins_default: main-mcan4-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x088, PIN_INPUT, 0) /* (AF36) MCAN4_RX */
+			J784S4_IOPAD(0x084, PIN_OUTPUT, 0) /* (AG38) MCAN4_TX */
+		>;
+	};
+
+	main_mcan16_pins_default: main-mcan16-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x028, PIN_INPUT, 0) /* (AE33) MCAN16_RX */
+			J784S4_IOPAD(0x024, PIN_OUTPUT, 0) /* (AH34) MCAN16_TX */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x064, PIN_INPUT, 13) /* (AF38) MCAN0_TX.I2C3_SCL */
+			J784S4_IOPAD(0x060, PIN_INPUT, 13) /* (AE36) MCASP2_AXR1.I2C3_SDA */
+		>;
+	};
+
+	main_mcasp0_pins_default: main-mcasp0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x038, PIN_OUTPUT_PULLDOWN, 1) /* (AK35) MCASP0_ACLKX */
+			J784S4_IOPAD(0x03c, PIN_OUTPUT_PULLDOWN, 1) /* (AK38) MCASP0_AFSX */
+			J784S4_IOPAD(0x07c, PIN_OUTPUT_PULLDOWN, 1) /* (AJ38) MCASP0_AXR3 */
+			J784S4_IOPAD(0x080, PIN_INPUT_PULLDOWN, 1) /* (AK34) MCASP0_AXR4 */
+		>;
+	};
+
+	audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */
+		>;
+	};
 };
 
 &wkup_pmx2 {
@@ -415,6 +537,32 @@
 			J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
 		>;
 	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */
+			J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */
+			J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */
+		>;
+	};
+
+	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (J38) MCU_SPI0_D1.WKUP_GPIO0_69 */
+		>;
+	};
+
+	mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */
+		>;
+	};
 };
 
 &wkup_pmx1 {
@@ -579,6 +727,27 @@
 			};
 		};
 	};
+
+	tps62873a: regulator@40 {
+		compatible = "ti,tps62873";
+		reg = <0x40>;
+		bootph-pre-ram;
+		regulator-name = "VDD_CPU_AVS";
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <1330000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	tps62873b: regulator@43 {
+		compatible = "ti,tps62873";
+		reg = <0x43>;
+		regulator-name = "VDD_CORE_0V8";
+		regulator-min-microvolt = <760000>;
+		regulator-max-microvolt = <840000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &mcu_uart0 {
@@ -748,6 +917,14 @@
 				  "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#",
 				  "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3",
 				  "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ";
+
+		p12-hog {
+			/* P12 - AUDIO_MUX_SEL */
+			gpio-hog;
+			gpios = <12 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "AUDIO_MUX_SEL";
+		};
 	};
 
 	exp2: gpio@22 {
@@ -763,6 +940,22 @@
 				  "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ",
 				  "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ",
 				  "USER_INPUT1", "USER_LED1", "USER_LED2";
+
+		p13-hog {
+			/* P13 - CANUART_MUX_SEL0 */
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "CANUART_MUX_SEL0";
+		};
+
+		p15-hog {
+			/* P15 - CANUART_MUX1_SEL1 */
+			gpio-hog;
+			gpios = <15 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "CANUART_MUX1_SEL1";
+		};
 	};
 };
 
@@ -832,6 +1025,31 @@
 	phy-handle = <&mcu_phy0>;
 };
 
+&main_cpsw1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_cpsw2g_default_pins>;
+	status = "okay";
+};
+
+&main_cpsw1_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_cpsw2g_mdio_default_pins>;
+	status = "okay";
+
+	main_cpsw1_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&main_cpsw1_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&main_cpsw1_phy0>;
+	status = "okay";
+};
+
 &mailbox0_cluster0 {
 	status = "okay";
 	interrupts = <436>;
@@ -1041,6 +1259,48 @@
 				 <&k3_clks 218 22>;
 };
 
+&serdes0 {
+	status = "okay";
+
+	serdes0_pcie1_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
+	serdes0_usb_link: phy@3 {
+		reg = <3>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz0 4>;
+	};
+};
+
+&serdes_wiz0 {
+	status = "okay";
+};
+
+&usb_serdes_mux {
+	idle-states = <0>; /* USB0 to SERDES lane 3 */
+};
+
+&usbss0 {
+	status = "okay";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	pinctrl-names = "default";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
 &serdes_wiz4 {
 	status = "okay";
 };
@@ -1105,3 +1365,113 @@
 		};
 	};
 };
+
+&mcu_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver0>;
+};
+
+&mcu_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&main_mcan16 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan16_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&main_mcan4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan4_pins_default>;
+	phys = <&transceiver3>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	num-lanes = <2>;
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie1_link>;
+	phy-names = "pcie-phy";
+};
+
+&serdes1 {
+	status = "okay";
+
+	serdes1_pcie0_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&serdes_wiz1 {
+	status = "okay";
+};
+
+&pcie0_rc {
+	status = "okay";
+	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes1_pcie0_link>;
+	phy-names = "pcie-phy";
+};
+
+&k3_clks {
+	/* Confiure AUDIO_EXT_REFCLK1 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_ext_refclk1_pins_default>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcm3168a_1: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+		#sound-dai-cells = <1>;
+		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
+		clocks = <&audio_refclk1>;
+		clock-names = "scki";
+		VDD1-supply = <&vsys_3v3>;
+		VDD2-supply = <&vsys_3v3>;
+		VCCAD1-supply = <&vsys_5v0>;
+		VCCAD2-supply = <&vsys_5v0>;
+		VCCDA1-supply = <&vsys_5v0>;
+		VCCDA2-supply = <&vsys_5v0>;
+	};
+};
+
+&mcasp0 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp0_pins_default>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	auxclk-fs-ratio = <256>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 1
+		2 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+};
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4-main.dtsi b/dts/upstream/src/arm64/ti/k3-j784s4-main.dtsi
index 6a4554c6c9c..d4ac1c9872a 100644
--- a/dts/upstream/src/arm64/ti/k3-j784s4-main.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j784s4-main.dtsi
@@ -48,6 +48,39 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
+		cpsw1_phy_gmii_sel: phy@4034 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4034 0x4>;
+			#phy-cells = <1>;
+		};
+
+		cpsw0_phy_gmii_sel: phy@4044 {
+			compatible = "ti,j784s4-cpsw9g-phy-gmii-sel";
+			reg = <0x4044 0x20>;
+			#phy-cells = <1>;
+			ti,qsgmii-main-ports = <7>, <7>;
+		};
+
+		pcie0_ctrl: pcie0-ctrl@4070 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4070 0x4>;
+		};
+
+		pcie1_ctrl: pcie1-ctrl@4074 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4074 0x4>;
+		};
+
+		pcie2_ctrl: pcie2-ctrl@4078 {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x4078 0x4>;
+		};
+
+		pcie3_ctrl: pcie3-ctrl@407c {
+			compatible = "ti,j784s4-pcie-ctrl", "syscon";
+			reg = <0x407c 0x4>;
+		};
+
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
 			reg = <0x00004080 0x30>;
@@ -75,6 +108,88 @@
 				      <J784S4_SERDES4_LANE2_EDP_LANE2>,
 				      <J784S4_SERDES4_LANE3_EDP_LANE3>;
 		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "reg-mux";
+			reg = <0x4000 0x4>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 3 mux */
+		};
+
+		ehrpwm_tbclk: clock-controller@4140 {
+			compatible = "ti,am654-ehrpwm-tbclk";
+			reg = <0x4140 0x18>;
+			#clock-cells = <1>;
+		};
+
+		audio_refclk1: clock@82e4 {
+			compatible = "ti,am62-audio-refclk";
+			reg = <0x82e4 0x4>;
+			clocks = <&k3_clks 157 34>;
+			assigned-clocks = <&k3_clks 157 34>;
+			assigned-clock-parents = <&k3_clks 157 63>;
+			#clock-cells = <0>;
+		};
+	};
+
+	main_ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3000000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 219 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 219 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	main_ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3010000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 220 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 220 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	main_ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3020000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 221 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	main_ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3030000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 222 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	main_ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3040000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 223 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	main_ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		reg = <0x00 0x3050000 0x00 0x100>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 224 0>;
+		clock-names = "tbclk", "fck";
+		power-domains = <&k3_pds 224 TI_SCI_PD_EXCLUSIVE>;
+		#pwm-cells = <3>;
+		status = "disabled";
 	};
 
 	gic500: interrupt-controller@1800000 {
@@ -568,6 +683,38 @@
 		status = "disabled";
 	};
 
+	usbss0: usb@4104000 {
+		bootph-all;
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4104000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 398 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 398 21>, <&k3_clks 398 2>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 398 21>;    /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 398 22>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		status = "disabled"; /* Needs lane config */
+
+		usb0: usb@6000000 {
+			bootph-all;
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6000000 0x00 0x10000>,
+			      <0x00 0x6010000 0x00 0x10000>,
+			      <0x00 0x6020000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  /* irq.0 */
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+		};
+	};
+
 	main_i2c0: i2c@2000000 {
 		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
 		reg = <0x00 0x02000000 0x00 0x100>;
@@ -907,6 +1054,122 @@
 		status = "disabled";
 	};
 
+	pcie0_rc: pcie@2900000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 332 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 332 0>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 333 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 333 0>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x10000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie2_rc: pcie@2920000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02920000 0x00 0x1000>,
+		      <0x00 0x02927000 0x00 0x400>,
+		      <0x00 0x0e000000 0x00 0x00800000>,
+		      <0x44 0x00000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie2_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 334 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 334 0>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x20000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie3_rc: pcie@2930000 {
+		compatible = "ti,j784s4-pcie-host";
+		reg = <0x00 0x02930000 0x00 0x1000>,
+		      <0x00 0x02937000 0x00 0x400>,
+		      <0x00 0x0e800000 0x00 0x00800000>,
+		      <0x44 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie3_ctrl 0x0>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 335 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 335 0>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb012>;
+		msi-map = <0x0 &gic_its 0x30000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
 	serdes_wiz0: wiz@5060000 {
 		compatible = "ti,j784s4-wiz-10g";
 		#address-cells = <1>;
@@ -1427,6 +1690,180 @@
 		};
 	};
 
+	main_cpsw0: ethernet@c000000 {
+		compatible = "ti,j784s4-cpswxg-nuss";
+		reg = <0x00 0xc000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-coherent;
+		clocks = <&k3_clks 64 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xca00>,
+		       <&main_udmap 0xca01>,
+		       <&main_udmap 0xca02>,
+		       <&main_udmap 0xca03>,
+		       <&main_udmap 0xca04>,
+		       <&main_udmap 0xca05>,
+		       <&main_udmap 0xca06>,
+		       <&main_udmap 0xca07>,
+		       <&main_udmap 0x4a00>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			main_cpsw0_port1: port@1 {
+				reg = <1>;
+				label = "port1";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port2: port@2 {
+				reg = <2>;
+				label = "port2";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port3: port@3 {
+				reg = <3>;
+				label = "port3";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port4: port@4 {
+				reg = <4>;
+				label = "port4";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port5: port@5 {
+				reg = <5>;
+				label = "port5";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port6: port@6 {
+				reg = <6>;
+				label = "port6";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port7: port@7 {
+				reg = <7>;
+				label = "port7";
+				ti,mac-only;
+				status = "disabled";
+			};
+
+			main_cpsw0_port8: port@8 {
+				reg = <8>;
+				label = "port8";
+				ti,mac-only;
+				status = "disabled";
+			};
+		};
+
+		main_cpsw0_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 64 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 64 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	main_cpsw1: ethernet@c200000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		reg = <0x00 0xc200000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0xc200000 0x00 0x200000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-coherent;
+		clocks = <&k3_clks 62 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xc640>,
+			<&main_udmap 0xc641>,
+			<&main_udmap 0xc642>,
+			<&main_udmap 0xc643>,
+			<&main_udmap 0xc644>,
+			<&main_udmap 0xc645>,
+			<&main_udmap 0xc646>,
+			<&main_udmap 0xc647>,
+			<&main_udmap 0x4640>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+				"tx4", "tx5", "tx6", "tx7",
+				"rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			main_cpsw1_port1: port@1 {
+				reg = <1>;
+				label = "port1";
+				phys = <&cpsw1_phy_gmii_sel 1>;
+				ti,mac-only;
+				status = "disabled";
+			};
+		};
+
+		main_cpsw1_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 62 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 62 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
 	main_mcan0: can@2701000 {
 		compatible = "bosch,m_can";
 		reg = <0x00 0x02701000 0x00 0x200>,
@@ -2255,4 +2692,94 @@
 			 */
 		};
 	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 265 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 265 0>;
+		assigned-clock-parents = <&k3_clks 265 1>;
+		power-domains = <&k3_pds 265 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 266 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 266 0>;
+		assigned-clock-parents = <&k3_clks 266 1>;
+		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 267 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 267 0>;
+		assigned-clock-parents = <&k3_clks 267 1>;
+		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp3: mcasp@2b30000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b30000 0x00 0x2000>,
+		      <0x00 0x02b38000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc403>, <&main_udmap 0x4403>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 268 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 268 0>;
+		assigned-clock-parents = <&k3_clks 268 1>;
+		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp4: mcasp@2b40000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b40000 0x00 0x2000>,
+		      <0x00 0x02b48000 0x00 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+		dmas = <&main_udmap 0xc404>, <&main_udmap 0x4404>;
+		dma-names = "tx", "rx";
+		clocks = <&k3_clks 269 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 269 0>;
+		assigned-clock-parents = <&k3_clks 269 1>;
+		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi b/dts/upstream/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
index 2e18d91ae92..f3a6ed1c979 100644
--- a/dts/upstream/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -145,12 +145,16 @@
 		status = "reserved";
 	};
 
-	mcu_conf: syscon@40f00000 {
-		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
-		reg = <0x00 0x40f00000 0x00 0x20000>;
+	mcu_conf: bus@40f00000 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x00 0x00 0x40f00000 0x20000>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		cpsw_mac_syscon: ethernet-mac-syscon@200 {
+			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
+			reg = <0x200 0x8>;
+		};
 
 		phy_gmii_sel: phy@4040 {
 			compatible = "ti,am654-phy-gmii-sel";
@@ -553,7 +557,7 @@
 				reg = <1>;
 				ti,mac-only;
 				label = "port1";
-				ti,syscon-efuse = <&mcu_conf 0x200>;
+				ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
 				phys = <&phy_gmii_sel 1>;
 			};
 		};
diff --git a/dts/upstream/src/arm64/ti/k3-j784s4.dtsi b/dts/upstream/src/arm64/ti/k3-j784s4.dtsi
index da7368ed6b5..73cc3c1fec0 100644
--- a/dts/upstream/src/arm64/ti/k3-j784s4.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-j784s4.dtsi
@@ -238,7 +238,10 @@
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
 			 <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */
 			 <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */
-			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIe0 Core*/
+			 <0x00 0x0d800000 0x00 0x0d800000 0x00 0x00800000>, /* PCIe1 Core*/
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x00800000>, /* PCIe2 Core*/
+			 <0x00 0x0e800000 0x00 0x0e800000 0x00 0x00800000>, /* PCIe3 Core*/
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */
 			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
 			 <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */
@@ -248,7 +251,12 @@
 			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */
 			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x40 0x00000000 0x40 0x00000000 0x01 0x00000000>, /* PCIe0 DAT1 */
 			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+			 <0x42 0x00000000 0x42 0x00000000 0x01 0x00000000>, /* PCIe2 DAT1 */
+			 <0x43 0x00000000 0x43 0x00000000 0x01 0x00000000>, /* PCIe3 DAT1 */
+			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT0 */
+			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT0 */
 			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
 
 			 /* MCUSS_WKUP Range */
diff --git a/dts/upstream/src/arm64/ti/k3-pinctrl.h b/dts/upstream/src/arm64/ti/k3-pinctrl.h
index 4cd2df467d0..22b8d73cfd3 100644
--- a/dts/upstream/src/arm64/ti/k3-pinctrl.h
+++ b/dts/upstream/src/arm64/ti/k3-pinctrl.h
@@ -38,6 +38,9 @@
 #define PIN_DEBOUNCE_CONF5	(5 << DEBOUNCE_SHIFT)
 #define PIN_DEBOUNCE_CONF6	(6 << DEBOUNCE_SHIFT)
 
+/* Default mux configuration for gpio-ranges to use with pinctrl */
+#define PIN_GPIO_RANGE_IOPAD	(PIN_INPUT | 7)
+
 #define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
diff --git a/dts/upstream/src/arm64/ti/k3-serdes.h b/dts/upstream/src/arm64/ti/k3-serdes.h
index a011ad893b4..ef360606814 100644
--- a/dts/upstream/src/arm64/ti/k3-serdes.h
+++ b/dts/upstream/src/arm64/ti/k3-serdes.h
@@ -201,4 +201,12 @@
 #define J784S4_SERDES4_LANE3_USB		0x2
 #define J784S4_SERDES4_LANE3_IP4_UNUSED		0x3
 
+/* J722S */
+
+#define J722S_SERDES0_LANE0_USB			0x0
+#define J722S_SERDES0_LANE0_QSGMII_LANE2	0x1
+
+#define J722S_SERDES1_LANE0_PCIE0_LANE0		0x0
+#define J722S_SERDES1_LANE0_QSGMII_LANE1	0x1
+
 #endif /* DTS_ARM64_TI_K3_SERDES_H */
diff --git a/dts/upstream/src/arm64/xilinx/zynqmp-clk-ccf.dtsi b/dts/upstream/src/arm64/xilinx/zynqmp-clk-ccf.dtsi
index dd4569e7bd9..60d1b1acf9a 100644
--- a/dts/upstream/src/arm64/xilinx/zynqmp-clk-ccf.dtsi
+++ b/dts/upstream/src/arm64/xilinx/zynqmp-clk-ccf.dtsi
@@ -70,6 +70,22 @@
 	clocks = <&zynqmp_clk ACPU>;
 };
 
+&cpu0_debug {
+	clocks = <&zynqmp_clk DBF_FPD>;
+};
+
+&cpu1_debug {
+	clocks = <&zynqmp_clk DBF_FPD>;
+};
+
+&cpu2_debug {
+	clocks = <&zynqmp_clk DBF_FPD>;
+};
+
+&cpu3_debug {
+	clocks = <&zynqmp_clk DBF_FPD>;
+};
+
 &fpd_dma_chan1 {
 	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
 };
diff --git a/dts/upstream/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso b/dts/upstream/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
index d7535a77b45..95d16904d76 100644
--- a/dts/upstream/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/dts/upstream/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -22,6 +22,17 @@
 /plugin/;
 
 &{/} {
+	compatible = "xlnx,zynqmp-sk-kv260-revA",
+		     "xlnx,zynqmp-sk-kv260-revY",
+		     "xlnx,zynqmp-sk-kv260-revZ",
+		     "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
+	model = "ZynqMP KV260 revA";
+
+	ina260-u14 {
+		compatible = "iio-hwmon";
+		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
+	};
+
 	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -68,7 +79,12 @@
 	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
-	/* u14 - 0x40 - ina260 */
+	u14: ina260@40 { /* u14 */
+		compatible = "ti,ina260";
+		#io-channel-cells = <1>;
+		label = "ina260-u14";
+		reg = <0x40>;
+	};
 	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
 };
 
@@ -321,6 +337,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		conf-cd {
diff --git a/dts/upstream/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso b/dts/upstream/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso
index a7b8fffad49..a74d0ac7e07 100644
--- a/dts/upstream/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/dts/upstream/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -17,6 +17,17 @@
 /plugin/;
 
 &{/} {
+	compatible = "xlnx,zynqmp-sk-kv260-rev2",
+		     "xlnx,zynqmp-sk-kv260-rev1",
+		     "xlnx,zynqmp-sk-kv260-revB",
+		     "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
+	model = "ZynqMP KV260 revB";
+
+	ina260-u14 {
+		compatible = "iio-hwmon";
+		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
+	};
+
 	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -52,6 +63,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
@@ -63,8 +86,13 @@
 	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
-	/* u14 - 0x40 - ina260 */
-	/* u43 - 0x2d - usb5744 */
+	u14: ina260@40 { /* u14 */
+		compatible = "ti,ina260";
+		#io-channel-cells = <1>;
+		label = "ina260-u14";
+		reg = <0x40>;
+	};
+	/* u43 - 0x2d - USB hub */
 	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
 };
 
@@ -81,6 +109,14 @@
 	phy-names = "dp-phy0", "dp-phy1";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
 	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+
+	ports {
+		port@5 {
+			dpsub_dp_out: endpoint {
+				remote-endpoint = <&dpcon_in>;
+			};
+		};
+	};
 };
 
 &zynqmp_dpdma {
@@ -305,6 +341,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		conf-cd {
diff --git a/dts/upstream/src/arm64/xilinx/zynqmp-sm-k26-revA.dts b/dts/upstream/src/arm64/xilinx/zynqmp-sm-k26-revA.dts
index 51622896b1b..86e6c499056 100644
--- a/dts/upstream/src/arm64/xilinx/zynqmp-sm-k26-revA.dts
+++ b/dts/upstream/src/arm64/xilinx/zynqmp-sm-k26-revA.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * dts file for Xilinx ZynqMP SM-K26 rev1/B/A
+ * dts file for Xilinx ZynqMP SM-K26 rev2/1/B/A
  *
  * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ * (C) Copyright 2023 - 2024, Advanced Micro Devices, Inc.
  *
  * Michal Simek <michal.simek@amd.com>
  */
@@ -17,8 +18,9 @@
 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 
 / {
-	model = "ZynqMP SM-K26 Rev1/B/A";
-	compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB",
+	model = "ZynqMP SM-K26 Rev2/1/B/A";
+	compatible = "xlnx,zynqmp-sm-k26-rev2",
+		     "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB",
 		     "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26",
 		     "xlnx,zynqmp";
 
@@ -101,12 +103,23 @@
 			<&xilinx_ams 24>, <&xilinx_ams 25>, <&xilinx_ams 26>,
 			<&xilinx_ams 27>, <&xilinx_ams 28>, <&xilinx_ams 29>;
 	};
+
+	pwm-fan {
+		compatible = "pwm-fan";
+		status = "okay";
+		pwms = <&ttc0 2 40000 0>;
+	};
 };
 
 &modepin_gpio {
 	label = "modepin";
 };
 
+&ttc0 {
+	status = "okay";
+	#pwm-cells = <3>;
+};
+
 &uart1 { /* MIO36/MIO37 */
 	status = "okay";
 };
diff --git a/dts/upstream/src/arm64/xilinx/zynqmp-smk-k26-revA.dts b/dts/upstream/src/arm64/xilinx/zynqmp-smk-k26-revA.dts
index 85b0d167724..b804abe89d1 100644
--- a/dts/upstream/src/arm64/xilinx/zynqmp-smk-k26-revA.dts
+++ b/dts/upstream/src/arm64/xilinx/zynqmp-smk-k26-revA.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * dts file for Xilinx ZynqMP SMK-K26 rev1/B/A
+ * dts file for Xilinx ZynqMP SMK-K26 rev2/1/B/A
  *
  * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ * (C) Copyright 2023 - 2024, Advanced Micro Devices, Inc.
  *
  * Michal Simek <michal.simek@amd.com>
  */
@@ -10,8 +11,9 @@
 #include "zynqmp-sm-k26-revA.dts"
 
 / {
-	model = "ZynqMP SMK-K26 Rev1/B/A";
-	compatible = "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB",
+	model = "ZynqMP SMK-K26 Rev2/1/B/A";
+	compatible = "xlnx,zynqmp-smk-k26-rev2",
+		     "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB",
 		     "xlnx,zynqmp-smk-k26-revA", "xlnx,zynqmp-smk-k26",
 		     "xlnx,zynqmp";
 };
diff --git a/dts/upstream/src/arm64/xilinx/zynqmp-zcu102-rev1.0.dts b/dts/upstream/src/arm64/xilinx/zynqmp-zcu102-rev1.0.dts
index c8f71a1aec8..495ca94b45d 100644
--- a/dts/upstream/src/arm64/xilinx/zynqmp-zcu102-rev1.0.dts
+++ b/dts/upstream/src/arm64/xilinx/zynqmp-zcu102-rev1.0.dts
@@ -14,6 +14,14 @@
 	compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
 };
 
+&rproc_split {
+	status = "okay";
+};
+
+&rproc_lockstep {
+	status = "disabled";
+};
+
 &eeprom {
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/dts/upstream/src/arm64/xilinx/zynqmp.dtsi b/dts/upstream/src/arm64/xilinx/zynqmp.dtsi
index d99830c9b85..b1b31dcf629 100644
--- a/dts/upstream/src/arm64/xilinx/zynqmp.dtsi
+++ b/dts/upstream/src/arm64/xilinx/zynqmp.dtsi
@@ -207,13 +207,71 @@
 				mbox-names = "tx", "rx";
 			};
 
-			nvmem-firmware {
+			soc-nvmem {
 				compatible = "xlnx,zynqmp-nvmem-fw";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				soc_revision: soc-revision@0 {
-					reg = <0x0 0x4>;
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					soc_revision: soc-revision@0 {
+						reg = <0x0 0x4>;
+					};
+					/* efuse access */
+					efuse_dna: efuse-dna@c {
+						reg = <0xc 0xc>;
+					};
+					efuse_usr0: efuse-usr0@20 {
+						reg = <0x20 0x4>;
+					};
+					efuse_usr1: efuse-usr1@24 {
+						reg = <0x24 0x4>;
+					};
+					efuse_usr2: efuse-usr2@28 {
+						reg = <0x28 0x4>;
+					};
+					efuse_usr3: efuse-usr3@2c {
+						reg = <0x2c 0x4>;
+					};
+					efuse_usr4: efuse-usr4@30 {
+						reg = <0x30 0x4>;
+					};
+					efuse_usr5: efuse-usr5@34 {
+						reg = <0x34 0x4>;
+					};
+					efuse_usr6: efuse-usr6@38 {
+						reg = <0x38 0x4>;
+					};
+					efuse_usr7: efuse-usr7@3c {
+						reg = <0x3c 0x4>;
+					};
+					efuse_miscusr: efuse-miscusr@40 {
+						reg = <0x40 0x4>;
+					};
+					efuse_chash: efuse-chash@50 {
+						reg = <0x50 0x4>;
+					};
+					efuse_pufmisc: efuse-pufmisc@54 {
+						reg = <0x54 0x4>;
+					};
+					efuse_sec: efuse-sec@58 {
+						reg = <0x58 0x4>;
+					};
+					efuse_spkid: efuse-spkid@5c {
+						reg = <0x5c 0x4>;
+					};
+					efuse_aeskey: efuse-aeskey@60 {
+						reg = <0x60 0x20>;
+					};
+					efuse_ppk0hash: efuse-ppk0hash@a0 {
+						reg = <0xa0 0x30>;
+					};
+					efuse_ppk1hash: efuse-ppk1hash@d0 {
+						reg = <0xd0 0x30>;
+					};
+					efuse_pufuser: efuse-pufuser@100 {
+						reg = <0x100 0x7F>;
+					};
 				};
 			};
 
@@ -252,7 +310,7 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	fpga_full: fpga-full {
+	fpga_full: fpga-region {
 		compatible = "fpga-region";
 		fpga-mgr = <&zynqmp_pcap>;
 		#address-cells = <2>;
@@ -260,19 +318,76 @@
 		ranges;
 	};
 
-	remoteproc {
+	rproc_lockstep: remoteproc@ffe00000 {
 		compatible = "xlnx,zynqmp-r5fss";
 		xlnx,cluster-mode = <1>;
+		xlnx,tcm-mode = <1>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
 
-		r5f-0 {
+		ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+			 <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+			 <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
+			 <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
+
+		r5f@0 {
 			compatible = "xlnx,zynqmp-r5f";
-			power-domains = <&zynqmp_firmware PD_RPU_0>;
+			reg = <0x0 0x0 0x0 0x10000>,
+			      <0x0 0x20000 0x0 0x10000>,
+			      <0x0 0x10000 0x0 0x10000>,
+			      <0x0 0x30000 0x0 0x10000>;
+			reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
+			power-domains = <&zynqmp_firmware PD_RPU_0>,
+					<&zynqmp_firmware PD_R5_0_ATCM>,
+					<&zynqmp_firmware PD_R5_0_BTCM>,
+					<&zynqmp_firmware PD_R5_1_ATCM>,
+					<&zynqmp_firmware PD_R5_1_BTCM>;
 			memory-region = <&rproc_0_fw_image>;
 		};
 
-		r5f-1 {
+		r5f@1 {
 			compatible = "xlnx,zynqmp-r5f";
-			power-domains = <&zynqmp_firmware PD_RPU_1>;
+			reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+			reg-names = "atcm0", "btcm0";
+			power-domains = <&zynqmp_firmware PD_RPU_1>,
+					<&zynqmp_firmware PD_R5_1_ATCM>,
+					<&zynqmp_firmware PD_R5_1_BTCM>;
+			memory-region = <&rproc_1_fw_image>;
+		};
+	};
+
+	rproc_split: remoteproc-split@ffe00000 {
+		status = "disabled";
+		compatible = "xlnx,zynqmp-r5fss";
+		xlnx,cluster-mode = <0>;
+		xlnx,tcm-mode = <0>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+			 <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+			 <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+			 <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+		r5f@0 {
+			compatible = "xlnx,zynqmp-r5f";
+			reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+			reg-names = "atcm0", "btcm0";
+			power-domains = <&zynqmp_firmware PD_RPU_0>,
+					<&zynqmp_firmware PD_R5_0_ATCM>,
+					<&zynqmp_firmware PD_R5_0_BTCM>;
+			memory-region = <&rproc_0_fw_image>;
+		};
+
+		r5f@1 {
+			compatible = "xlnx,zynqmp-r5f";
+			reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+			reg-names = "atcm0", "btcm0";
+			power-domains = <&zynqmp_firmware PD_RPU_1>,
+					<&zynqmp_firmware PD_R5_1_ATCM>,
+					<&zynqmp_firmware PD_R5_1_BTCM>;
 			memory-region = <&rproc_1_fw_image>;
 		};
 	};
@@ -330,6 +445,34 @@
 			};
 		};
 
+		cpu0_debug: debug@fec10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xfec10000 0x0 0x1000>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu0>;
+		};
+
+		cpu1_debug: debug@fed10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xfed10000 0x0 0x1000>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu1>;
+		};
+
+		cpu2_debug: debug@fee10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xfee10000 0x0 0x1000>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu2>;
+		};
+
+		cpu3_debug: debug@fef10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xfef10000 0x0 0x1000>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu3>;
+		};
+
 		/* GDMA */
 		fpd_dma_chan1: dma-controller@fd500000 {
 			status = "disabled";
@@ -684,6 +827,13 @@
 			power-domains = <&zynqmp_firmware PD_I2C_1>;
 		};
 
+		ocm: memory-controller@ff960000 {
+			compatible = "xlnx,zynqmp-ocmc-1.0";
+			reg = <0x0 0xff960000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pcie: pcie@fd0e0000 {
 			compatible = "xlnx,nwl-pcie-2.11";
 			status = "disabled";
@@ -941,10 +1091,11 @@
 				status = "disabled";
 				reg = <0x0 0xfe200000 0x0 0x40000>;
 				interrupt-parent = <&gic>;
-				interrupt-names = "host", "peripheral", "otg";
+				interrupt-names = "host", "peripheral", "otg", "wakeup";
 				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "ref";
 				/* iommus = <&smmu 0x860>; */
 				snps,quirk-frame-length-adjustment = <0x20>;
@@ -972,10 +1123,11 @@
 				status = "disabled";
 				reg = <0x0 0xfe300000 0x0 0x40000>;
 				interrupt-parent = <&gic>;
-				interrupt-names = "host", "peripheral", "otg";
+				interrupt-names = "host", "peripheral", "otg", "wakeup";
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+					     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "ref";
 				/* iommus = <&smmu 0x861>; */
 				snps,quirk-frame-length-adjustment = <0x20>;
@@ -1024,8 +1176,6 @@
 				compatible = "xlnx,zynqmp-ams-pl";
 				status = "disabled";
 				reg = <0x400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 		};
 
diff --git a/dts/upstream/src/mips/loongson/loongson64-2k1000.dtsi b/dts/upstream/src/mips/loongson/loongson64-2k1000.dtsi
index ee3e2153dd1..cc7747c5f21 100644
--- a/dts/upstream/src/mips/loongson/loongson64-2k1000.dtsi
+++ b/dts/upstream/src/mips/loongson/loongson64-2k1000.dtsi
@@ -23,14 +23,6 @@
 		};
 	};
 
-	memory@200000 {
-		compatible = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0x00200000 0x00000000 0x0ee00000>, /* 238 MB at 2 MB */
-			<0x00000000 0x20000000 0x00000000 0x1f000000>, /* 496 MB at 512 MB */
-			<0x00000001 0x10000000 0x00000001 0xb0000000>; /* 6912 MB at 4352MB */
-	};
-
 	cpu_clk: cpu_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -52,6 +44,13 @@
 			0 0x40000000 0 0x40000000 0 0x40000000
 			0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>;
 
+		isa@18000000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x18000000 0x4000>;
+		};
+
 		pm: reset-controller@1fe07000 {
 			compatible = "loongson,ls2k-pm";
 			reg = <0 0x1fe07000 0 0x422>;
@@ -100,8 +99,8 @@
 		rtc0: rtc@1fe07800 {
 			compatible = "loongson,ls2k1000-rtc";
 			reg = <0 0x1fe07800 0 0x78>;
-			interrupt-parent = <&liointc0>;
-			interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		uart0: serial@1fe00000 {
@@ -109,7 +108,7 @@
 			reg = <0 0x1fe00000 0 0x8>;
 			clock-frequency = <125000000>;
 			interrupt-parent = <&liointc0>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			no-loopback-test;
 		};
 
@@ -118,7 +117,6 @@
 			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <2>;
 
 			reg = <0 0x1a000000 0 0x02000000>,
 				<0xfe 0x00000000 0 0x20000000>;
@@ -133,11 +131,12 @@
 						   "pciclass0c03";
 
 				reg = <0x1800 0x0 0x0 0x0 0x0>;
-				interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
-					     <13 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&liointc0>;
-				phy-mode = "rgmii";
+				phy-mode = "rgmii-id";
+				phy-handle = <&phy1>;
 				mdio {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -156,11 +155,12 @@
 						   "loongson, pci-gmac";
 
 				reg = <0x1900 0x0 0x0 0x0 0x0>;
-				interrupts = <14 IRQ_TYPE_LEVEL_LOW>,
-					     <15 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&liointc0>;
-				phy-mode = "rgmii";
+				phy-mode = "rgmii-id";
+				phy-handle = <&phy1>;
 				mdio {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -178,7 +178,7 @@
 						   "pciclass0c03";
 
 				reg = <0x2100 0x0 0x0 0x0 0x0>;
-				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 			};
 
@@ -189,7 +189,7 @@
 						   "pciclass0c03";
 
 				reg = <0x2200 0x0 0x0 0x0 0x0>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 			};
 
@@ -200,97 +200,121 @@
 						   "pciclass0106";
 
 				reg = <0x4000 0x0 0x0 0x0 0x0>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc0>;
 			};
 
-			pci_bridge@9,0 {
+			pcie@9,0 {
 				compatible = "pci0014,7a19.0",
 						   "pci0014,7a19",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@a,0 {
+			pcie@a,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@b,0 {
+			pcie@b,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@c,0 {
+			pcie@c,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@d,0 {
+			pcie@d,0 {
 				compatible = "pci0014,7a19.0",
 						   "pci0014,7a19",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@e,0 {
+			pcie@e,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
 				external-facing;
 			};
 
diff --git a/dts/upstream/src/mips/loongson/loongson64g_4core_ls7a.dts b/dts/upstream/src/mips/loongson/loongson64g_4core_ls7a.dts
index c945f8565d5..fb180cb2b8e 100644
--- a/dts/upstream/src/mips/loongson/loongson64g_4core_ls7a.dts
+++ b/dts/upstream/src/mips/loongson/loongson64g_4core_ls7a.dts
@@ -33,6 +33,7 @@
 		compatible = "loongson,pch-msi-1.0";
 		reg = <0 0x2ff00000 0 0x8>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		msi-controller;
 		loongson,msi-base-vec = <64>;
 		loongson,msi-num-vecs = <192>;
diff --git a/dts/upstream/src/mips/mobileye/eyeq5-fixed-clocks.dtsi b/dts/upstream/src/mips/mobileye/eyeq5-clocks.dtsi
index 78f5533a95c..17a342cc744 100644
--- a/dts/upstream/src/mips/mobileye/eyeq5-fixed-clocks.dtsi
+++ b/dts/upstream/src/mips/mobileye/eyeq5-clocks.dtsi
@@ -3,42 +3,20 @@
  * Copyright 2023 Mobileye Vision Technologies Ltd.
  */
 
+#include <dt-bindings/clock/mobileye,eyeq5-clk.h>
+
 / {
 	/* Fixed clock */
-	pll_cpu: pll-cpu {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1500000000>;
-	};
-
-	pll_vdi: pll-vdi {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1280000000>;
-	};
-
-	pll_per: pll-per {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <2000000000>;
-	};
-
-	pll_ddr0: pll-ddr0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1857210000>;
-	};
-
-	pll_ddr1: pll-ddr1 {
+	xtal: xtal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <1857210000>;
+		clock-frequency = <30000000>;
 	};
 
 /* PLL_CPU derivatives */
 	occ_cpu: occ-cpu {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_cpu>;
+		clocks = <&olb EQ5C_PLL_CPU>;
 		#clock-cells = <0>;
 		clock-div = <1>;
 		clock-mult = <1>;
@@ -101,7 +79,7 @@
 	};
 	occ_isram: occ-isram {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_cpu>;
+		clocks = <&olb EQ5C_PLL_CPU>;
 		#clock-cells = <0>;
 		clock-div = <2>;
 		clock-mult = <1>;
@@ -115,7 +93,7 @@
 	};
 	occ_dbu: occ-dbu {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_cpu>;
+		clocks = <&olb EQ5C_PLL_CPU>;
 		#clock-cells = <0>;
 		clock-div = <10>;
 		clock-mult = <1>;
@@ -130,7 +108,7 @@
 /* PLL_VDI derivatives */
 	occ_vdi: occ-vdi {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_vdi>;
+		clocks = <&olb EQ5C_PLL_VDI>;
 		#clock-cells = <0>;
 		clock-div = <2>;
 		clock-mult = <1>;
@@ -144,7 +122,7 @@
 	};
 	occ_can_ser: occ-can-ser {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_vdi>;
+		clocks = <&olb EQ5C_PLL_VDI>;
 		#clock-cells = <0>;
 		clock-div = <16>;
 		clock-mult = <1>;
@@ -158,7 +136,7 @@
 	};
 	i2c_ser_clk: i2c-ser-clk {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_vdi>;
+		clocks = <&olb EQ5C_PLL_VDI>;
 		#clock-cells = <0>;
 		clock-div = <20>;
 		clock-mult = <1>;
@@ -166,7 +144,7 @@
 /* PLL_PER derivatives */
 	occ_periph: occ-periph {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_per>;
+		clocks = <&olb EQ5C_PLL_PER>;
 		#clock-cells = <0>;
 		clock-div = <16>;
 		clock-mult = <1>;
@@ -225,7 +203,7 @@
 	};
 	emmc_sys_clk: emmc-sys-clk {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_per>;
+		clocks = <&olb EQ5C_PLL_PER>;
 		#clock-cells = <0>;
 		clock-div = <10>;
 		clock-mult = <1>;
@@ -233,7 +211,7 @@
 	};
 	ccf_ctrl_clk: ccf-ctrl-clk {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_per>;
+		clocks = <&olb EQ5C_PLL_PER>;
 		#clock-cells = <0>;
 		clock-div = <4>;
 		clock-mult = <1>;
@@ -241,7 +219,7 @@
 	};
 	occ_mjpeg_core: occ-mjpeg-core {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_per>;
+		clocks = <&olb EQ5C_PLL_PER>;
 		#clock-cells = <0>;
 		clock-div = <2>;
 		clock-mult = <1>;
@@ -265,7 +243,7 @@
 	};
 	fcmu_a_clk: fcmu-a-clk {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_per>;
+		clocks = <&olb EQ5C_PLL_PER>;
 		#clock-cells = <0>;
 		clock-div = <20>;
 		clock-mult = <1>;
@@ -273,7 +251,7 @@
 	};
 	occ_pci_sys: occ-pci-sys {
 		compatible = "fixed-factor-clock";
-		clocks = <&pll_per>;
+		clocks = <&olb EQ5C_PLL_PER>;
 		#clock-cells = <0>;
 		clock-div = <8>;
 		clock-mult = <1>;
diff --git a/dts/upstream/src/mips/mobileye/eyeq5-pins.dtsi b/dts/upstream/src/mips/mobileye/eyeq5-pins.dtsi
new file mode 100644
index 00000000000..0b3671013ab
--- /dev/null
+++ b/dts/upstream/src/mips/mobileye/eyeq5-pins.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+/*
+ * Default pin configuration for Mobileye EyeQ5 boards. We mostly create one
+ * pin configuration node per function.
+ */
+
+&olb {
+	timer0_pins: timer0-pins {
+		function = "timer0";
+		pins = "PA0", "PA1";
+	};
+	timer1_pins: timer1-pins {
+		function = "timer1";
+		pins = "PA2", "PA3";
+	};
+	timer2_pins: timer2-pins {
+		function = "timer2";
+		pins = "PA4", "PA5";
+	};
+	pps0_pins: pps0-pin {
+		function = "timer2";
+		pins = "PA4";
+	};
+	pps1_pins: pps1-pin {
+		function = "timer2";
+		pins = "PA5";
+	};
+	timer5_ext_pins: timer5-ext-pins {
+		function = "timer5";
+		pins = "PA6", "PA7", "PA8", "PA9";
+	};
+	timer5_ext_input_pins: timer5-ext-input-pins {
+		function = "timer5";
+		pins = "PA6", "PA7";
+	};
+	timer5_ext_incap_a_pins: timer5-ext-incap-a-pin {
+		function = "timer5";
+		pins = "PA6";
+	};
+	timer5_ext_incap_b_pins: timer5-ext-incap-b-pin {
+		function = "timer5";
+		pins = "PA7";
+	};
+	can0_pins: can0-pins {
+		function = "can0";
+		pins = "PA14", "PA15";
+	};
+	can1_pins: can1-pins {
+		function = "can1";
+		pins = "PA16", "PA17";
+	};
+	uart0_pins: uart0-pins {
+		function = "uart0";
+		pins = "PA10", "PA11";
+	};
+	uart1_pins: uart1-pins {
+		function = "uart1";
+		pins = "PA12", "PA13";
+	};
+	spi0_pins: spi0-pins {
+		function = "spi0";
+		pins = "PA18", "PA19", "PA20", "PA21", "PA22";
+	};
+	spi1_pins: spi1-pins {
+		function = "spi1";
+		pins = "PA23", "PA24", "PA25", "PA26", "PA27";
+	};
+	spi1_slave_pins: spi1-slave-pins {
+		function = "spi1";
+		pins = "PA24", "PA25", "PA26";
+	};
+	refclk0_pins: refclk0-pin {
+		function = "refclk0";
+		pins = "PA28";
+	};
+	timer3_pins: timer3-pins {
+		function = "timer3";
+		pins = "PB0", "PB1";
+	};
+	timer4_pins: timer4-pins {
+		function = "timer4";
+		pins = "PB2", "PB3";
+	};
+	timer6_ext_pins: timer6-ext-pins {
+		function = "timer6";
+		pins = "PB4", "PB5", "PB6", "PB7";
+	};
+	timer6_ext_input_pins: timer6-ext-input-pins {
+		function = "timer6";
+		pins = "PB4", "PB5";
+	};
+	timer6_ext_incap_a_pins: timer6-ext-incap-a-pin {
+		function = "timer6";
+		pins = "PB4";
+	};
+	timer6_ext_incap_b_pins: timer6-ext-incap-b-pin {
+		function = "timer6";
+		pins = "PB5";
+	};
+	can2_pins: can2-pins {
+		function = "can2";
+		pins = "PB10", "PB11";
+	};
+	uart2_pins: uart2-pins {
+		function = "uart2";
+		pins = "PB8", "PB9";
+	};
+	spi2_pins: spi2-pins {
+		function = "spi2";
+		pins = "PB12", "PB13", "PB14", "PB15", "PB16";
+	};
+	spi3_pins: spi3-pins {
+		function = "spi3";
+		pins = "PB17", "PB18", "PB19", "PB20", "PB21";
+	};
+	spi3_slave_pins: spi3-slave-pins {
+		function = "spi3";
+		pins = "PB18", "PB19", "PB20";
+	};
+	mclk0_pins: mclk0-pin {
+		function = "mclk0";
+		pins = "PB22";
+	};
+};
diff --git a/dts/upstream/src/mips/mobileye/eyeq5.dtsi b/dts/upstream/src/mips/mobileye/eyeq5.dtsi
index 6cc5980e2fa..0708771c193 100644
--- a/dts/upstream/src/mips/mobileye/eyeq5.dtsi
+++ b/dts/upstream/src/mips/mobileye/eyeq5.dtsi
@@ -5,7 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/mips-gic.h>
 
-#include "eyeq5-fixed-clocks.dtsi"
+#include "eyeq5-clocks.dtsi"
 
 / {
 	#address-cells = <2>;
@@ -78,6 +78,9 @@
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&olb 0 10>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
 		};
 
 		uart1: serial@900000 {
@@ -88,6 +91,9 @@
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&olb 0 11>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
 		};
 
 		uart2: serial@a00000 {
@@ -98,6 +104,18 @@
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&olb 0 12>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
+		};
+
+		olb: system-controller@e00000 {
+			compatible = "mobileye,eyeq5-olb", "syscon";
+			reg = <0 0xe00000 0x0 0x400>;
+			#reset-cells = <2>;
+			#clock-cells = <1>;
+			clocks = <&xtal>;
+			clock-names = "ref";
 		};
 
 		gic: interrupt-controller@140000 {
@@ -122,3 +140,5 @@
 		};
 	};
 };
+
+#include "eyeq5-pins.dtsi"
diff --git a/dts/upstream/src/mips/mobileye/eyeq6h-epm6.dts b/dts/upstream/src/mips/mobileye/eyeq6h-epm6.dts
new file mode 100644
index 00000000000..ebc0d363fbf
--- /dev/null
+++ b/dts/upstream/src/mips/mobileye/eyeq6h-epm6.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2024 Mobileye Vision Technologies Ltd.
+ */
+
+/dts-v1/;
+
+#include "eyeq6h.dtsi"
+
+/ {
+	compatible = "mobileye,eyeq6-epm6", "mobileye,eyeq6";
+	model = "Mobile EyeQ6H MP6 Evaluation board";
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x1 0x00000000 0x1 0x00000000>;
+	};
+};
diff --git a/dts/upstream/src/mips/mobileye/eyeq6h-fixed-clocks.dtsi b/dts/upstream/src/mips/mobileye/eyeq6h-fixed-clocks.dtsi
new file mode 100644
index 00000000000..5fa99e06fde
--- /dev/null
+++ b/dts/upstream/src/mips/mobileye/eyeq6h-fixed-clocks.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2023 Mobileye Vision Technologies Ltd.
+ */
+
+#include <dt-bindings/clock/mobileye,eyeq5-clk.h>
+
+/ {
+	xtal: clock-30000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+	};
+
+	pll_west: clock-2000000000-west {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2000000000>;
+	};
+
+	pll_cpu: clock-2000000000-cpu {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2000000000>;
+	};
+
+	/* pll-cpu derivatives */
+	occ_cpu: clock-2000000000-occ-cpu {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_cpu>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+
+	/* pll-west derivatives */
+	occ_periph_w: clock-200000000 {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_west>;
+		#clock-cells = <0>;
+		clock-div = <10>;
+		clock-mult = <1>;
+	};
+	uart_clk: clock-200000000-uart {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph_w>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+
+};
diff --git a/dts/upstream/src/mips/mobileye/eyeq6h-pins.dtsi b/dts/upstream/src/mips/mobileye/eyeq6h-pins.dtsi
new file mode 100644
index 00000000000..a3d1b368489
--- /dev/null
+++ b/dts/upstream/src/mips/mobileye/eyeq6h-pins.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2024 Mobileye Vision Technologies Ltd.
+ */
+
+/*
+ * MUX register structure
+ * bits    | field      | comment
+ * [0]     | MUX_SEL    | 0 - GPIO, 1 - alternative func
+ * [4]     | SW_LOOPBACK|
+ * [5]     | SW_OUT_HZ  |
+ * [7]     | DBG_IN     |
+ * [11:8]  | DS         | drive strength
+ * [13:12] | PUD        | pull-up/pull-down. 0, 3 - no, 1 - PD, 2 - PU
+ * [14]    | OD         | Open drain
+ * [15]    | ST_CFG     | Hysteretic input enable (Schmitt trigger)
+ */
+
+&pinctrl_west {
+	// TODO: use pinctrl-single,bias-pullup
+	// TODO: use pinctrl-single,bias-pulldown
+	// TODO: use pinctrl-single,drive-strength
+	// TODO: use pinctrl-single,input-schmitt
+
+	i2c0_pins: i2c0-pins {
+		pinctrl-single,pins = <
+			0x000 0x200	// I2C0_SCL pin
+			0x004 0x200	// I2C0_SDA pin
+		>;
+	};
+	i2c1_pins: i2c1-pins {
+		pinctrl-single,pins = <
+			0x008 0x200	// I2C1_SCL pin
+			0x00c 0x200	// I2C1_SDA pin
+		>;
+	};
+	eth0_pins: eth0-pins {
+		pinctrl-single,pins = <
+			0x080 1		// GPIO_C4__SMA0_MDC pin
+			0x084 1		// GPIO_C5__SMA0_MDIO pin
+		>;
+	};
+	uart0_pins: uart0-pins {
+		pinctrl-single,pins = <0x0a8 1>; // UART0 pin group
+	};
+	uart1_pins: uart1-pins {
+		pinctrl-single,pins = <0x0a0 1>; // UART1 pin group
+	};
+	spi0_pins: spi0-pins {
+		pinctrl-single,pins = <0x0ac 1>; // SPI0 pin group
+	};
+	spi1_pins: spi1-pins {
+		pinctrl-single,pins = <0x0a4 1>; // SPI1 pin group
+	};
+};
+
+&pinctrl_east {
+	i2c2_pins: i2c2-pins {
+		pinctrl-single,pins = <
+			0x000 0x200	// i2c2_SCL pin
+			0x004 0x200	// i2c2_SDA pin
+		>;
+	};
+	i2c3_pins: i2c3-pins {
+		pinctrl-single,pins = <
+			0x008 0x200	// i2c3_SCL pin
+			0x00c 0x200	// i2c3_SDA pin
+		>;
+	};
+	eth1_pins: eth1-pins {
+		pinctrl-single,pins = <
+			0x080 1	// GPIO_D4__SMA1_MDC pin
+			0x084 1	// GPIO_D5__SMA1_MDIO pin
+		>;
+	};
+	uart2_sel_pins: uart2-pins {
+		pinctrl-single,pins = <0x0a4 1>; // UART2 pin group
+	};
+	uart3_pins: uart3-pins {
+		pinctrl-single,pins = <0x09c 1>; // UART3 pin group
+	};
+	spi2_pins: spi2-pins {
+		pinctrl-single,pins = <0x0a8 1>; // SPI2 pin group
+	};
+	spi3_pins: spi3-pins {
+		pinctrl-single,pins = <0x0a0 1>; // SPI3 pin group
+	};
+};
diff --git a/dts/upstream/src/mips/mobileye/eyeq6h.dtsi b/dts/upstream/src/mips/mobileye/eyeq6h.dtsi
new file mode 100644
index 00000000000..1db3c3cda2e
--- /dev/null
+++ b/dts/upstream/src/mips/mobileye/eyeq6h.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Copyright 2024 Mobileye Vision Technologies Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+#include "eyeq6h-fixed-clocks.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "img,i6500";
+			reg = <0>;
+			clocks = <&occ_cpu>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@d3331000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0xd3331000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&occ_periph_w>, <&occ_periph_w>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pinctrl_west: pinctrl@d3337000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xd3337000 0x0 0xb0>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xffff>;
+		};
+
+		pinctrl_east: pinctrl@d3357000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xd3357000 0x0 0xb0>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xffff>;
+		};
+
+		pinctrl_south: pinctrl@d8014000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xd8014000 0x0 0xf8>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xffff>;
+		};
+
+		gic: interrupt-controller@f0920000 {
+			compatible = "mti,gic";
+			reg = <0x0 0xf0920000 0x0 0x20000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/*
+			 * Declare the interrupt-parent even though the mti,gic
+			 * binding doesn't require it, such that the kernel can
+			 * figure out that cpu_intc is the root interrupt
+			 * controller & should be probed first.
+			 */
+			interrupt-parent = <&cpu_intc>;
+
+			timer {
+				compatible = "mti,gic-timer";
+				interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+				clocks = <&occ_cpu>;
+			};
+		};
+	};
+};
+
+#include "eyeq6h-pins.dtsi"
diff --git a/dts/upstream/src/mips/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts b/dts/upstream/src/mips/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
new file mode 100644
index 00000000000..77d2566545f
--- /dev/null
+++ b/dts/upstream/src/mips/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/dts-v1/;
+
+#include "rtl930x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "cameo,rtl9302c-2x-rtl8224-2xge", "realtek,rtl9302-soc";
+	model = "RTL9302C Development Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "LOADER";
+				reg = <0x0 0xe0000>;
+				read-only;
+			};
+			partition@e0000 {
+				label = "BDINFO";
+				reg = <0xe0000 0x10000>;
+			};
+			partition@f0000 {
+				label = "SYSINFO";
+				reg = <0xf0000 0x10000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "JFFS2 CFG";
+				reg = <0x100000 0x100000>;
+			};
+			partition@200000 {
+				label = "JFFS2 LOG";
+				reg = <0x200000 0x100000>;
+			};
+			partition@300000 {
+				label = "RUNTIME";
+				reg = <0x300000 0xe80000>;
+			};
+			partition@1180000 {
+				label = "RUNTIME2";
+				reg = <0x1180000 0xe80000>;
+			};
+		};
+	};
+};
diff --git a/dts/upstream/src/mips/realtek/rtl838x.dtsi b/dts/upstream/src/mips/realtek/rtl838x.dtsi
index 6cc4ff5c0d1..722106e3919 100644
--- a/dts/upstream/src/mips/realtek/rtl838x.dtsi
+++ b/dts/upstream/src/mips/realtek/rtl838x.dtsi
@@ -6,6 +6,7 @@
 		#size-cells = <0>;
 
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "mips,mips4KEc";
 			reg = <0>;
 			clocks = <&baseclk 0>;
diff --git a/dts/upstream/src/mips/realtek/rtl83xx.dtsi b/dts/upstream/src/mips/realtek/rtl83xx.dtsi
index de65a111b62..03ddc61f7c9 100644
--- a/dts/upstream/src/mips/realtek/rtl83xx.dtsi
+++ b/dts/upstream/src/mips/realtek/rtl83xx.dtsi
@@ -22,7 +22,7 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x18000000 0x10000>;
 
-		uart0: uart@2000 {
+		uart0: serial@2000 {
 			compatible = "ns16550a";
 			reg = <0x2000 0x100>;
 
@@ -39,7 +39,7 @@
 			status = "disabled";
 		};
 
-		uart1: uart@2100 {
+		uart1: serial@2100 {
 			compatible = "ns16550a";
 			reg = <0x2100 0x100>;
 
diff --git a/dts/upstream/src/mips/realtek/rtl930x.dtsi b/dts/upstream/src/mips/realtek/rtl930x.dtsi
new file mode 100644
index 00000000000..f271940f82b
--- /dev/null
+++ b/dts/upstream/src/mips/realtek/rtl930x.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+
+#include "rtl83xx.dtsi"
+
+/ {
+	compatible = "realtek,rtl9302-soc";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips34Kc";
+			reg = <0>;
+			clocks = <&baseclk 0>;
+			clock-names = "cpu";
+		};
+	};
+
+	baseclk: clock-800mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+	};
+
+	lx_clk: clock-175mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <175000000>;
+	};
+};
+
+&soc {
+	intc: interrupt-controller@3000 {
+		compatible = "realtek,rtl9300-intc", "realtek,rtl-intc";
+		reg = <0x3000 0x18>, <0x3018 0x18>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>, <3>, <4>, <5>, <6>, <7>;
+	};
+
+	spi0: spi@1200 {
+		compatible = "realtek,rtl8380-spi";
+		reg = <0x1200 0x100>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	timer0: timer@3200 {
+		compatible = "realtek,rtl9302-timer", "realtek,otto-timer";
+		reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>,
+		    <0x3230 0x10>, <0x3240 0x10>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <7>, <8>, <9>, <10>, <11>;
+		clocks = <&lx_clk>;
+	};
+};
+
+&uart0 {
+	/delete-property/ clock-frequency;
+	clocks = <&lx_clk>;
+
+	interrupt-parent = <&intc>;
+	interrupts = <30>;
+};
+
+&uart1 {
+	/delete-property/ clock-frequency;
+	clocks = <&lx_clk>;
+
+	interrupt-parent = <&intc>;
+	interrupts = <31>;
+};
+
diff --git a/dts/upstream/src/powerpc/acadia.dts b/dts/upstream/src/powerpc/acadia.dts
deleted file mode 100644
index 5fedda81137..00000000000
--- a/dts/upstream/src/powerpc/acadia.dts
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Device Tree Source for AMCC Acadia (405EZ)
- *
- * Copyright IBM Corp. 2008
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "amcc,acadia";
-	compatible = "amcc,acadia";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EZ";
-			reg = <0x0>;
-			clock-frequency = <0>; /* Filled in by wrapper */
-			timebase-frequency = <0>; /* Filled in by wrapper */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>;
-			d-cache-size = <16384>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>; /* Filled in by wrapper */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic-405ez", "ibm,uic";
-		interrupt-controller;
-		dcr-reg = <0x0c0 0x009>;
-		cell-index = <0>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	plb {
-		compatible = "ibm,plb-405ez", "ibm,plb3";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by wrapper */
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-405ez", "ibm,mcmal";
-			dcr-reg = <0x380 0x62>;
-			num-tx-chans = <1>;
-			num-rx-chans = <1>;
-			interrupt-parent = <&UIC0>;
-			/* 405EZ has only 3 interrupts to the UIC, as
-			 * SERR, TXDE, and RXDE are or'd together into
-			 * one UIC bit
-			 */
-			interrupts = <
-				0x13 0x4 /* TXEOB */
-				0x15 0x4 /* RXEOB */
-				0x12 0x4 /* SERR, TXDE, RXDE */>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405ez", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			dcr-reg = <0x0a 0x05>;
-			clock-frequency = <0>; /* Filled in by wrapper */
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x8>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by wrapper */
-				current-speed = <115200>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x5 0x4>;
-			};
-
-			UART1: serial@ef600400 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600400 0x8>;
-				clock-frequency = <0>; /* Filled in by wrapper */
-				current-speed = <115200>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x6 0x4>;
-			};
-
-			IIC: i2c@ef600500 {
-				compatible = "ibm,iic-405ez", "ibm,iic";
-				reg = <0xef600500 0x11>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0xa 0x4>;
-			};
-
-			GPIO0: gpio@ef600700 {
-				compatible = "ibm,gpio-405ez";
-				reg = <0xef600700 0x20>;
-			};
-
-			GPIO1: gpio@ef600800 {
-				compatible = "ibm,gpio-405ez";
-				reg = <0xef600800 0x20>;
-			};
-
-			EMAC0: ethernet@ef600900 {
-				device_type = "network";
-				compatible = "ibm,emac-405ez", "ibm,emac";
-				interrupt-parent = <&UIC0>;
-				interrupts = <
-					0x10 0x4 /* Ethernet */
-					0x11 0x4 /* Ethernet Wake up */>;
-				local-mac-address = [000000000000]; /* Filled in by wrapper */
-				reg = <0xef600900 0x70>;
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "mii";
-				phy-map = <0x0>;
-			};
-
-			CAN0: can@ef601000 {
-				compatible = "amcc,can-405ez";
-				reg = <0xef601000 0x620>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-			CAN1: can@ef601800 {
-				compatible = "amcc,can-405ez";
-				reg = <0xef601800 0x620>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x8 0x4>;
-			};
-
-			cameleon@ef602000 {
-				compatible = "amcc,cameleon-405ez";
-				reg = <0xef602000 0x800>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0xb 0x4 0xc 0x4>;
-			};
-
-			ieee1588@ef602800 {
-				compatible = "amcc,ieee1588-405ez";
-				reg = <0xef602800 0x60>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x4 0x4>;
-				/* This thing is a bit weird.  It has its own UIC
-				 * that it uses to generate snapshot triggers.  We
-				 * don't really support this device yet, and it needs
-				 * work to figure this out.
-				 */
-				dcr-reg = <0xe0 0x9>;
-			};
-
-			usb@ef603000 {
-				compatible = "ohci-be";
-				reg = <0xef603000 0x80>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0xd 0x4 0xe 0x4>;
-			};
-
-			dac@ef603300 {
-				compatible = "amcc,dac-405ez";
-				reg = <0xef603300 0x40>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x18 0x4>;
-			};
-
-			adc@ef603400 {
-				compatible = "amcc,adc-405ez";
-				reg = <0xef603400 0x40>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x17 0x4>;
-			};
-
-			spi@ef603500 {
-				compatible = "amcc,spi-405ez";
-				reg = <0xef603500 0x100>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x9 0x4>;
-			};
-		};
-
-		EBC0: ebc {
-			compatible = "ibm,ebc-405ez", "ibm,ebc";
-			dcr-reg = <0x12 0x2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			clock-frequency = <0>; /* Filled in by wrapper */
-		};
-	};
-
-	chosen {
-		stdout-path = "/plb/opb/serial@ef600300";
-	};
-};
diff --git a/dts/upstream/src/powerpc/haleakala.dts b/dts/upstream/src/powerpc/haleakala.dts
deleted file mode 100644
index f81ce8786d5..00000000000
--- a/dts/upstream/src/powerpc/haleakala.dts
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Device Tree Source for AMCC Haleakala (405EXr)
- *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "amcc,haleakala";
-	compatible = "amcc,haleakala", "amcc,kilauea";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EXr";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>; /* 16 kB */
-			d-cache-size = <16384>; /* 16 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic-405exr", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-405exr","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-405exr","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	plb {
-		compatible = "ibm,plb-405exr", "ibm,plb4";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2";
-			dcr-reg = <0x010 0x002>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <0x5 0x4	/* ECC DED Error */ 
-				      0x6 0x4>;	/* ECC SEC Error */ 
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-405exr", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405exr", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x80000000 0x80000000 0x10000000
-				  0xef600000 0xef600000 0x00a00000
-				  0xf0000000 0xf0000000 0x10000000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-405exr", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x00200000>;
-					};
-					partition@200000 {
-						label = "root";
-						reg = <0x00200000 0x00200000>;
-					};
-					partition@400000 {
-						label = "user";
-						reg = <0x00400000 0x03b60000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-			};
-
-			UART0: serial@ef600200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600200 0x00000008>;
-				virtual-reg = <0xef600200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1a 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600400 {
-				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <0xef600400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			IIC1: i2c@ef600500 {
-				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <0xef600500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-
-			RGMII0: emac-rgmii@ef600b00 {
-				compatible = "ibm,rgmii-405exr", "ibm,rgmii";
-				reg = <0xef600b00 0x00000104>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405exr", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
-						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
-				reg = <0xef600900 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCIE0: pcie@a0000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0xa0000000 0x20000000	/* Config space access */
-			       0xef000000 0x00001000>;	/* Registers */
-			dcr-reg = <0x040 0x020>;
-			sdr-base = <0x400>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
-				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0x00 to 0x3f */
-			bus-range = <0x0 0x3f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
-		};
-	};
-};
diff --git a/dts/upstream/src/powerpc/hotfoot.dts b/dts/upstream/src/powerpc/hotfoot.dts
deleted file mode 100644
index b93bf2d9dd5..00000000000
--- a/dts/upstream/src/powerpc/hotfoot.dts
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Device Tree Source for ESTeem 195E Hotfoot
- *
- * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "est,hotfoot";
-	compatible = "est,hotfoot";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EP";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <0x20>;
-			d-cache-line-size = <0x20>;
-			i-cache-size = <0x4000>;
-			d-cache-size = <0x4000>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	plb {
-		compatible = "ibm,plb3";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405ep";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL: mcmal {
-			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <4>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <
-				0xb 0x4 /* TXEOB */
-				0xc 0x4 /* RXEOB */
-				0xa 0x4 /* SERR */
-				0xd 0x4 /* TXDE */
-				0xe 0x4 /* RXDE */>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405ep", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xef600000 0xef600000 0x00a00000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by zImage */
-
-			/* Hotfoot has UART0/UART1 swapped */
-
-			UART0: serial@ef600400 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600400 0x00000008>;
-				virtual-reg = <0xef600400>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <0x9600>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <0x9600>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			IIC: i2c@ef600500 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "ibm,iic-405ep", "ibm,iic";
-				reg = <0xef600500 0x00000011>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-
-				rtc@68 {
-					/* Actually a DS1339 */
-					compatible = "dallas,ds1307";
-					reg = <0x68>;
-				};
-
-				temp@4a {
-					/* Not present on all boards */
-					compatible = "national,lm75";
-					reg = <0x4a>;
-				};
-			};
-
-			GPIO: gpio@ef600700 {
-				#gpio-cells = <2>;
-				compatible = "ibm,ppc4xx-gpio";
-				reg = <0xef600700 0x00000020>;
-				gpio-controller;
-			};
-
-			gpio-leds {
-				compatible = "gpio-leds";
-				status {
-					label = "Status";
-					gpios = <&GPIO 1 0>;
-				};
-				radiorx {
-					label = "Rx";
-					gpios = <&GPIO 0xe 0>;
-				};
-			};
-
-			EMAC0: ethernet@ef600800 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405ep", "ibm,emac";
-				interrupt-parent = <&UIC0>;
-				interrupts = <
-					0xf 0x4 /* Ethernet */
-					0x9 0x4 /* Ethernet Wake Up */>;
-				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <0xef600800 0x00000070>;
-				mal-device = <&MAL>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <0x5dc>;
-				rx-fifo-size = <0x1000>;
-				tx-fifo-size = <0x800>;
-				phy-mode = "mii";
-				phy-map = <0x00000000>;
-			};
-
-			EMAC1: ethernet@ef600900 {
-				linux,network-index = <0x1>;
-				device_type = "network";
-				compatible = "ibm,emac-405ep", "ibm,emac";
-				interrupt-parent = <&UIC0>;
-				interrupts = <
-					0x11 0x4 /* Ethernet */
-					0x9 0x4 /* Ethernet Wake Up */>;
-				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <0xef600900 0x00000070>;
-				mal-device = <&MAL>;
-				mal-tx-channel = <2>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <0x5dc>;
-				rx-fifo-size = <0x1000>;
-				tx-fifo-size = <0x800>;
-				mdio-device = <&EMAC0>;
-				phy-mode = "mii";
-				phy-map = <0x0000001>;
-			};
-		};
-
-		EBC0: ebc {
-			compatible = "ibm,ebc-405ep", "ibm,ebc";
-			dcr-reg = <0x012 0x002>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-
-			/* The ranges property is supplied by the bootwrapper
-			 * and is based on the firmware's configuration of the
-			 * EBC bridge
-			 */
-			clock-frequency = <0>; /* Filled in by zImage */
-
-			nor_flash@0 {
-				compatible = "cfi-flash";
-				bank-width = <2>;
-				reg = <0x0 0xff800000 0x00800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				/* This mapping is for the 8M flash
-				   4M flash has all ofssets -= 4M,
-				   and FeatFS partition is not present */
-				partition@0 {
-					label = "Bootloader";
-					reg = <0x7c0000 0x40000>;
-					/* read-only; */
-				};
-				partition@1 {
-					label = "Env_and_Config_Primary";
-					reg = <0x400000 0x10000>;
-				};
-				partition@2 {
-					label = "Kernel";
-					reg = <0x420000 0x100000>;
-				};
-				partition@3 {
-					label = "Filesystem";
-					reg = <0x520000 0x2a0000>;
-				};
-				partition@4 {
-					label = "Env_and_Config_Secondary";
-					reg = <0x410000 0x10000>;
-				};
-				partition@5 {
-					label = "FeatFS";
-					reg = <0x000000 0x400000>;
-				};
-				partition@6 {
-					label = "Bootloader_Env";
-					reg = <0x7d0000 0x10000>;
-				};
-			};
-		};
-
-		PCI0: pci@ec000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
-			primary;
-			reg = <0xeec00000 0x00000008    /* Config space access */
-				0xeed80000 0x00000004    /* IACK */
-				0xeed80000 0x00000004    /* Special cycle */
-				0xef480000 0x00000040>;  /* Internal registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed. Chip supports a second
-			 * IO range but we don't use it for now
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
-				0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			interrupt-parent = <&UIC0>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
-				0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
-				0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8
-
-				/* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
-				0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
-				0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
-				>;
-		};
-	};
-
-	chosen {
-		stdout-path = &UART0;
-	};
-};
diff --git a/dts/upstream/src/powerpc/kilauea.dts b/dts/upstream/src/powerpc/kilauea.dts
deleted file mode 100644
index c07a7525a72..00000000000
--- a/dts/upstream/src/powerpc/kilauea.dts
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * Device Tree Source for AMCC Kilauea (405EX)
- *
- * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "amcc,kilauea";
-	compatible = "amcc,kilauea";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EX";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>; /* 16 kB */
-			d-cache-size = <16384>; /* 16 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic-405ex", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	CPM0: cpm {
-		compatible = "ibm,cpm";
-		dcr-access-method = "native";
-		dcr-reg = <0x0b0 0x003>;
-		unused-units = <0x00000000>;
-		idle-doze = <0x02000000>;
-		standby = <0xe3e74800>;
-	};
-
-	plb {
-		compatible = "ibm,plb-405ex", "ibm,plb4";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
-			dcr-reg = <0x010 0x002>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <0x5 0x4	/* ECC DED Error */ 
-				      0x6 0x4>;	/* ECC SEC Error */ 
-		};
-
-		CRYPTO: crypto@ef700000 {
-			compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
-			reg = <0xef700000 0x80400>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <0x17 0x2>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405ex", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x80000000 0x80000000 0x10000000
-				  0xef600000 0xef600000 0x00a00000
-				  0xf0000000 0xf0000000 0x10000000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x001e0000>;
-					};
-					partition@1e0000 {
-						label = "dtb";
-						reg = <0x001e0000 0x00020000>;
-					};
-					partition@200000 {
-						label = "root";
-						reg = <0x00200000 0x00200000>;
-					};
-					partition@400000 {
-						label = "user";
-						reg = <0x00400000 0x03b60000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-
-				ndfc@1,0 {
-					compatible = "ibm,ndfc";
-					reg = <0x00000001 0x00000000 0x00002000>;
-					ccr = <0x00001000>;
-					bank-settings = <0x80002222>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					nand {
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						partition@0 {
-							label = "u-boot";
-							reg = <0x00000000 0x00100000>;
-						};
-						partition@100000 {
-							label = "user";
-							reg = <0x00000000 0x03f00000>;
-						};
-					};
-				};
-			};
-
-			UART0: serial@ef600200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600200 0x00000008>;
-				virtual-reg = <0xef600200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1a 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600400 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				rtc@68 {
-					compatible = "dallas,ds1338";
-					reg = <0x68>;
-				};
-
-				dtt@48 {
-					compatible = "dallas,ds1775";
-					reg = <0x48>;
-				};
-			};
-
-			IIC1: i2c@ef600500 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-			RGMII0: emac-rgmii@ef600b00 {
-				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <0xef600b00 0x00000104>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
-						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
-				reg = <0xef600900 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <0x1>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
-						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
-				reg = <0xef600a00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCIE0: pcie@a0000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0xa0000000 0x20000000	/* Config space access */
-			       0xef000000 0x00001000>;	/* Registers */
-			dcr-reg = <0x040 0x020>;
-			sdr-base = <0x400>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
-				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0x00 to 0x3f */
-			bus-range = <0x0 0x3f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
-		};
-
-		PCIE1: pcie@c0000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0xc0000000 0x20000000	/* Config space access */
-			       0xef001000 0x00001000>;	/* Registers */
-			dcr-reg = <0x060 0x020>;
-			sdr-base = <0x440>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
-				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0x40 to 0x7f */
-			bus-range = <0x40 0x7f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
-		};
-	};
-};
diff --git a/dts/upstream/src/powerpc/klondike.dts b/dts/upstream/src/powerpc/klondike.dts
deleted file mode 100644
index 97432177892..00000000000
--- a/dts/upstream/src/powerpc/klondike.dts
+++ /dev/null
@@ -1,212 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Device Tree for Klondike (APM8018X) board.
- *
- * Copyright (c) 2010, Applied Micro Circuits Corporation
- * Author: Tanmay Inamdar <tinamdar@apm.com>
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "apm,klondike";
-	compatible = "apm,klondike";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,apm8018x";
-			reg = <0x00000000>;
-			clock-frequency = <300000000>; /* Filled in by U-Boot */
-			timebase-frequency = <300000000>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>; /* 16 kB */
-			d-cache-size = <16384>; /* 16 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x010>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x010>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x010>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC3: interrupt-controller3 {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x0f0 0x010>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	plb {
-		compatible = "ibm,plb4";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-apm8018x";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <16>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-parent = <&UIC1>;
-			interrupts = </*TXEOB*/   0x6 0x4
-					/*RXEOB*/ 0x7 0x4
-					/*SERR*/  0x1 0x4
-					/*TXDE*/  0x2 0x4
-					/*RXDE*/  0x3 0x4>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x20000000 0x20000000 0x30000000
-				  0x50000000 0x50000000 0x10000000
-				  0x60000000 0x60000000 0x10000000
-				  0xFE000000 0xFE000000 0x00010000>;
-			dcr-reg = <0x100 0x020>;
-			clock-frequency = <300000000>; /* Filled in by U-Boot */
-
-			RGMII0: emac-rgmii@400a2000 {
-				compatible = "ibm,rgmii";
-				reg = <0x400a2000 0x00000010>;
-				has-mdio;
-			};
-
-			TAH0: emac-tah@400a3000 {
-				compatible = "ibm,tah";
-				reg = <0x400a3000 0x100>;
-			};
-
-			TAH1: emac-tah@400a4000 {
-				compatible = "ibm,tah";
-				reg = <0x400a4000 0x100>;
-			};
-
-			EMAC0: ethernet@400a0000 {
-				compatible = "ibm,emac4", "ibm-emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
-				reg = <0x400a0000 0x00000100>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0x0>;
-				mal-rx-channel = <0x0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-address = <0x2>;
-				turbo = "no";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				tah-device = <&TAH0>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@400a1000 {
-				compatible = "ibm,emac4", "ibm-emac4sync";
-				status = "disabled";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
-				reg = <0x400a1000 0x00000100>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <8>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-address = <0x3>;
-				turbo = "no";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				tah-device = <&TAH1>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-		};
-	};
-
-	chosen {
-		stdout-path = "/plb/opb/serial@50001000";
-	};
-};
diff --git a/dts/upstream/src/powerpc/makalu.dts b/dts/upstream/src/powerpc/makalu.dts
deleted file mode 100644
index c473cd911bc..00000000000
--- a/dts/upstream/src/powerpc/makalu.dts
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * Device Tree Source for AMCC Makalu (405EX)
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "amcc,makalu";
-	compatible = "amcc,makalu";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EX";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>; /* 16 kB */
-			d-cache-size = <16384>; /* 16 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic-405ex", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	plb {
-		compatible = "ibm,plb-405ex", "ibm,plb4";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
-			dcr-reg = <0x010 0x002>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <0x5 0x4 /* ECC DED Error */
-			              0x6 0x4 /* ECC SEC Error */ >;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405ex", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x80000000 0x80000000 0x10000000
-				  0xef600000 0xef600000 0x00a00000
-				  0xf0000000 0xf0000000 0x10000000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x00200000>;
-					};
-					partition@200000 {
-						label = "root";
-						reg = <0x00200000 0x00200000>;
-					};
-					partition@400000 {
-						label = "user";
-						reg = <0x00400000 0x03b60000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-			};
-
-			UART0: serial@ef600200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600200 0x00000008>;
-				virtual-reg = <0xef600200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1a 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600400 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			IIC1: i2c@ef600500 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-
-			RGMII0: emac-rgmii@ef600b00 {
-				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <0xef600b00 0x00000104>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
-						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
-				reg = <0xef600900 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x0000003f>;	/* Start at 6 */
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <0x1>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
-						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
-				reg = <0xef600a00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-                                rx-fifo-size-gige = <16384>;
-                                tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCIE0: pcie@a0000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0xa0000000 0x20000000	/* Config space access */
-			       0xef000000 0x00001000>;	/* Registers */
-			dcr-reg = <0x040 0x020>;
-			sdr-base = <0x400>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
-				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0x00 to 0x3f */
-			bus-range = <0x0 0x3f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
-		};
-
-		PCIE1: pcie@c0000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0xc0000000 0x20000000	/* Config space access */
-			       0xef001000 0x00001000>;	/* Registers */
-			dcr-reg = <0x060 0x020>;
-			sdr-base = <0x440>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
-				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0x40 to 0x7f */
-			bus-range = <0x40 0x7f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
-		};
-	};
-};
diff --git a/dts/upstream/src/powerpc/obs600.dts b/dts/upstream/src/powerpc/obs600.dts
deleted file mode 100644
index d10b0411809..00000000000
--- a/dts/upstream/src/powerpc/obs600.dts
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * Device Tree Source for PlatHome OpenBlockS 600 (405EX)
- *
- * Copyright 2011 Ben Herrenschmidt, IBM Corp.
- *
- * Based on Kilauea by:
- *
- * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "PlatHome,OpenBlockS 600";
-	compatible = "plathome,obs600";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EX";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>; /* 16 kB */
-			d-cache-size = <16384>; /* 16 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic-405ex", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	CPM0: cpm {
-		compatible = "ibm,cpm";
-		dcr-access-method = "native";
-		dcr-reg = <0x0b0 0x003>;
-		unused-units = <0x00000000>;
-		idle-doze = <0x02000000>;
-		standby = <0xe3e74800>;
-	};
-
-	plb {
-		compatible = "ibm,plb-405ex", "ibm,plb4";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
-			dcr-reg = <0x010 0x002>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <0x5 0x4	/* ECC DED Error */
-				      0x6 0x4>;	/* ECC SEC Error */
-		};
-
-		CRYPTO: crypto@ef700000 {
-			compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
-			reg = <0xef700000 0x80400>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <0x17 0x2>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405ex", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x80000000 0x80000000 0x10000000
-				  0xef600000 0xef600000 0x00a00000
-				  0xf0000000 0xf0000000 0x10000000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x08000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel + initrd";
-						reg = <0x00000000 0x03de0000>;
-					};
-					partition@3de0000 {
-						label = "user config area";
-						reg = <0x03de0000 0x00080000>;
-					};
-					partition@3e60000 {
-						label = "user program area";
-						reg = <0x03e60000 0x04000000>;
-					};
-					partition@7e60000 {
-						label = "flat device tree";
-						reg = <0x07e60000 0x00080000>;
-					};
-					partition@7ee0000 {
-						label = "test program";
-						reg = <0x07ee0000 0x00080000>;
-					};
-					partition@7f60000 {
-						label = "u-boot env";
-						reg = <0x07f60000 0x00040000>;
-					};
-					partition@7fa0000 {
-						label = "u-boot";
-						reg = <0x07fa0000 0x00060000>;
-					};
-				};
-			};
-
-			UART0: serial@ef600200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600200 0x00000008>;
-				virtual-reg = <0xef600200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1a 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600400 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				rtc@68 {
-					compatible = "dallas,ds1340";
-					reg = <0x68>;
-				};
-			};
-
-			IIC1: i2c@ef600500 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-			RGMII0: emac-rgmii@ef600b00 {
-				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <0xef600b00 0x00000104>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
-						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
-				reg = <0xef600900 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <0x1>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
-						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
-				reg = <0xef600a00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			GPIO: gpio@ef600800 {
-				device_type = "gpio";
-				compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio";
-				reg = <0xef600800 0x50>;
-			};
-		};
-	};
-        chosen {
-                stdout-path = "/plb/opb/serial@ef600200";
-        };
-};
diff --git a/dts/upstream/src/riscv/allwinner/sun20i-d1-clockworkpi-v3.14.dts b/dts/upstream/src/riscv/allwinner/sun20i-d1-clockworkpi-v3.14.dts
new file mode 100644
index 00000000000..750aec6cf2f
--- /dev/null
+++ b/dts/upstream/src/riscv/allwinner/sun20i-d1-clockworkpi-v3.14.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+	model = "ClockworkPi v3.14 (R-01)";
+	compatible = "clockwork,r-01-clockworkpi-v3.14", "allwinner,sun20i-d1";
+
+	aliases {
+		ethernet0 = &ap6256;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/*
+	 * This regulator is PWM-controlled, but the PWM controller is not
+	 * yet supported, so fix the regulator to its default voltage.
+	 */
+	reg_vdd_cpu: vdd-cpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&reg_vcc>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; /* PG11/GPIO3 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pb10_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	axp221: pmic@34 {
+		compatible = "x-powers,axp228", "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <4 9 IRQ_TYPE_LEVEL_LOW>; /* PE9/GPIO2 */
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		ac_power_supply: ac-power {
+			compatible = "x-powers,axp221-ac-power-supply";
+		};
+
+		axp_adc: adc {
+			compatible = "x-powers,axp221-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery_power_supply: battery-power {
+			compatible = "x-powers,axp221-battery-power-supply";
+		};
+
+		axp_gpio: gpio {
+			compatible = "x-powers,axp221-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		regulators {
+			x-powers,dcdc-freq = <3000>;
+
+			reg_dcdc1: dcdc1 {
+				regulator-name = "sys-3v3";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-name = "sys-1v8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			reg_aldo1: aldo1 {
+				regulator-name = "aud-3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-name = "disp-3v3";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-name = "vdd-wifi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			/* DLDO1 and ELDO1-3 are connected in parallel. */
+			reg_dldo1: dldo1 {
+				regulator-name = "vbat-wifi-a";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* DLDO2-DLDO4 are connected in parallel. */
+			reg_dldo2: dldo2 {
+				regulator-name = "vcc-3v3-ext-a";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_dldo3: dldo3 {
+				regulator-name = "vcc-3v3-ext-b";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_dldo4: dldo4 {
+				regulator-name = "vcc-3v3-ext-c";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-name = "vbat-wifi-b";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-name = "vbat-wifi-c";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-name = "vbat-wifi-d";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+
+		usb_power_supply: usb-power {
+			compatible = "x-powers,axp221-usb-power-supply";
+			status = "disabled";
+		};
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo3>;
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ap6256: wifi@1 {
+		compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10/GPIO4 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pg-supply = <&reg_ldoa>;
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb8_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		interrupt-parent = <&pio>;
+		interrupts = <6 17 IRQ_TYPE_LEVEL_HIGH>; /* PG17/GPIO6 */
+		device-wakeup-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16/GPIO7 */
+		shutdown-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18/GPIO5 */
+		max-speed = <1500000>;
+		vbat-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_aldo3>;
+	};
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus_power-supply = <&ac_power_supply>;
+	usb1_vbus-supply = <&reg_vcc>;
+	status = "okay";
+};
diff --git a/dts/upstream/src/riscv/allwinner/sun20i-d1-devterm-v3.14.dts b/dts/upstream/src/riscv/allwinner/sun20i-d1-devterm-v3.14.dts
new file mode 100644
index 00000000000..bc5c84f2276
--- /dev/null
+++ b/dts/upstream/src/riscv/allwinner/sun20i-d1-devterm-v3.14.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1-clockworkpi-v3.14.dts"
+
+/ {
+	model = "Clockwork DevTerm (R-01)";
+	compatible = "clockwork,r-01-devterm-v3.14",
+		     "clockwork,r-01-clockworkpi-v3.14",
+		     "allwinner,sun20i-d1";
+
+	fan {
+		compatible = "gpio-fan";
+		gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10/GPIO41 */
+		gpio-fan,speed-map = <0    0>,
+				     <6000 1>;
+		#cooling-cells = <2>;
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 3 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD14/GPIO44 */
+		scl-gpios = <&pio 3 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD15/GPIO45 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc@54 {
+			compatible = "ti,adc101c";
+			reg = <0x54>;
+			interrupt-parent = <&pio>;
+			interrupts = <4 12 IRQ_TYPE_LEVEL_LOW>; /* PE12/GPIO35 */
+			vref-supply = <&reg_dldo2>;
+			#io-channel-cells = <1>;
+		};
+	};
+};
diff --git a/dts/upstream/src/riscv/allwinner/sunxi-d1s-t113.dtsi b/dts/upstream/src/riscv/allwinner/sunxi-d1s-t113.dtsi
index 5a9d7f5a75b..e4175adb028 100644
--- a/dts/upstream/src/riscv/allwinner/sunxi-d1s-t113.dtsi
+++ b/dts/upstream/src/riscv/allwinner/sunxi-d1s-t113.dtsi
@@ -396,6 +396,17 @@
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			regulators@3000150 {
+				compatible = "allwinner,sun20i-d1-system-ldos";
+				reg = <0x3000150 0x4>;
+
+				reg_ldoa: ldoa {
+				};
+
+				reg_ldob: ldob {
+				};
+			};
 		};
 
 		dma: dma-controller@3002000 {
diff --git a/dts/upstream/src/riscv/microchip/mpfs-beaglev-fire-fabric.dtsi b/dts/upstream/src/riscv/microchip/mpfs-beaglev-fire-fabric.dtsi
new file mode 100644
index 00000000000..e153eaf9b90
--- /dev/null
+++ b/dts/upstream/src/riscv/microchip/mpfs-beaglev-fire-fabric.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	fabric-bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>, /* FIC3-FAB */
+			 <0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>, /* FIC0, LO */
+			 <0x0 0xe0000000 0x0 0xe0000000 0x0 0x20000000>, /* FIC1, LO */
+			 <0x20 0x0 0x20 0x0 0x10 0x0>, /* FIC0,HI */
+			 <0x30 0x0 0x30 0x0 0x10 0x0>; /* FIC1,HI */
+
+		cape_gpios_p8: gpio@41100000 {
+			compatible = "microchip,coregpio-rtl-v3";
+			reg = <0x0 0x41100000 0x0 0x1000>;
+			clocks = <&fabric_clk3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <16>;
+			gpio-line-names = "P8_PIN31", "P8_PIN32", "P8_PIN33", "P8_PIN34",
+					  "P8_PIN35", "P8_PIN36", "P8_PIN37", "P8_PIN38",
+					  "P8_PIN39", "P8_PIN40", "P8_PIN41", "P8_PIN42",
+					  "P8_PIN43", "P8_PIN44", "P8_PIN45", "P8_PIN46";
+		};
+
+		cape_gpios_p9: gpio@41200000 {
+			compatible = "microchip,coregpio-rtl-v3";
+			reg = <0x0 0x41200000 0x0 0x1000>;
+			clocks = <&fabric_clk3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <20>;
+			gpio-line-names = "P9_PIN11", "P9_PIN12", "P9_PIN13", "P9_PIN14",
+					  "P9_PIN15", "P9_PIN16", "P9_PIN17", "P9_PIN18",
+					  "P9_PIN21", "P9_PIN22", "P9_PIN23", "P9_PIN24",
+					  "P9_PIN25", "P9_PIN26", "P9_PIN27", "P9_PIN28",
+					  "P9_PIN29", "P9_PIN31", "P9_PIN41", "P9_PIN42";
+		};
+
+		hsi_gpios: gpio@44000000 {
+			compatible = "microchip,coregpio-rtl-v3";
+			reg = <0x0 0x44000000 0x0 0x1000>;
+			clocks = <&fabric_clk3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <20>;
+			gpio-line-names = "B0_HSIO70N", "B0_HSIO71N", "B0_HSIO83N",
+					  "B0_HSIO73N_C2P_CLKN", "B0_HSIO70P", "B0_HSIO71P",
+					  "B0_HSIO83P", "B0_HSIO73N_C2P_CLKP", "XCVR1_RX_VALID",
+					  "XCVR1_LOCK", "XCVR1_ERROR", "XCVR2_RX_VALID",
+					  "XCVR2_LOCK", "XCVR2_ERROR", "XCVR3_RX_VALID",
+					  "XCVR3_LOCK", "XCVR3_ERROR", "XCVR_0B_REF_CLK_PLL_LOCK",
+					  "XCVR_0C_REF_CLK_PLL_LOCK", "B0_HSIO81N";
+		};
+	};
+
+	refclk_ccc: cccrefclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
+
+&ccc_nw {
+	clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+		 <&refclk_ccc>, <&refclk_ccc>;
+	clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+		      "dll0_ref", "dll1_ref";
+	status = "okay";
+};
diff --git a/dts/upstream/src/riscv/microchip/mpfs-beaglev-fire.dts b/dts/upstream/src/riscv/microchip/mpfs-beaglev-fire.dts
new file mode 100644
index 00000000000..47cf693beb6
--- /dev/null
+++ b/dts/upstream/src/riscv/microchip/mpfs-beaglev-fire.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "mpfs.dtsi"
+#include "mpfs-beaglev-fire-fabric.dtsi"
+
+/* Clock frequency (in Hz) of MTIMER */
+#define MTIMER_FREQ		1000000
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "BeagleBoard BeagleV-Fire";
+	compatible = "beagle,beaglev-fire", "microchip,mpfs";
+
+	aliases {
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+		status = "okay";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hss: hss-buffer@103fc00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10 0x3fc00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	imx219_clk: camera-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	imx219_vana: fixedregulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "imx219_vana";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	imx219_vdig: fixedregulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "imx219_vdig";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	imx219_vddl: fixedregulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "imx219_vddl";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+};
+
+&gpio2 {
+	interrupts = <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>;
+	ngpios=<32>;
+	gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2",
+			  "P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5",
+			  "P8_PIN9_USER_LED_6", "P8_PIN10_USER_LED_7", "P8_PIN11_USER_LED_8",
+			  "P8_PIN12_USER_LED_9", "P8_PIN13_USER_LED_10", "P8_PIN14_USER_LED_11",
+			  "P8_PIN15", "P8_PIN16", "P8_PIN17", "P8_PIN18", "P8_PIN19", "P8_PIN20",
+			  "P8_PIN21", "P8_PIN22", "P8_PIN23", "P8_PIN24", "P8_PIN25", "P8_PIN26",
+			  "P8_PIN27", "P8_PIN28", "P8_PIN29", "P8_PIN30", "M2_W_DISABLE1",
+			  "M2_W_DISABLE2", "VIO_ENABLE", "SD_DET";
+	status = "okay";
+
+	vio-enable-hog {
+		gpio-hog;
+		gpios = <30 30>;
+		output-high;
+		line-name = "VIO_ENABLE";
+	};
+
+	sd-det-hog {
+		gpio-hog;
+		gpios = <31 31>;
+		input;
+		line-name = "SD_DET";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&imx219_clk>;
+		VANA-supply = <&imx219_vana>;   /* 2.8v */
+		VDIG-supply = <&imx219_vdig>;   /* 1.8v */
+		VDDL-supply = <&imx219_vddl>;   /* 1.2v */
+
+		port {
+			imx219_0: endpoint {
+				data-lanes = <1 2>;
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&mac0 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&mmuart0 {
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+	clock-frequency = <50000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&syscontroller {
+	microchip,bitstream-flash = <&sys_ctrl_flash>;
+	status = "okay";
+};
+
+&syscontroller_qspi {
+	status = "okay";
+
+	sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/dts/upstream/src/riscv/sophgo/sg2042-milkv-pioneer.dts b/dts/upstream/src/riscv/sophgo/sg2042-milkv-pioneer.dts
index 49b4b9c2c10..80cb017974d 100644
--- a/dts/upstream/src/riscv/sophgo/sg2042-milkv-pioneer.dts
+++ b/dts/upstream/src/riscv/sophgo/sg2042-milkv-pioneer.dts
@@ -14,6 +14,18 @@
 	};
 };
 
+&cgi_main {
+	clock-frequency = <25000000>;
+};
+
+&cgi_dpll0 {
+	clock-frequency = <25000000>;
+};
+
+&cgi_dpll1 {
+	clock-frequency = <25000000>;
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/dts/upstream/src/riscv/sophgo/sg2042.dtsi b/dts/upstream/src/riscv/sophgo/sg2042.dtsi
index 81fda312f98..34c802bd3f9 100644
--- a/dts/upstream/src/riscv/sophgo/sg2042.dtsi
+++ b/dts/upstream/src/riscv/sophgo/sg2042.dtsi
@@ -4,8 +4,10 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/sophgo,sg2042-clkgen.h>
+#include <dt-bindings/clock/sophgo,sg2042-pll.h>
+#include <dt-bindings/clock/sophgo,sg2042-rpgate.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-
 #include <dt-bindings/reset/sophgo,sg2042-reset.h>
 
 #include "sg2042-cpus.dtsi"
@@ -20,12 +22,60 @@
 		serial0 = &uart0;
 	};
 
+	cgi_main: oscillator0 {
+		compatible = "fixed-clock";
+		clock-output-names = "cgi_main";
+		#clock-cells = <0>;
+	};
+
+	cgi_dpll0: oscillator1 {
+		compatible = "fixed-clock";
+		clock-output-names = "cgi_dpll0";
+		#clock-cells = <0>;
+	};
+
+	cgi_dpll1: oscillator2 {
+		compatible = "fixed-clock";
+		clock-output-names = "cgi_dpll1";
+		#clock-cells = <0>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
+		pllclk: clock-controller@70300100c0 {
+			compatible = "sophgo,sg2042-pll";
+			reg = <0x70 0x300100c0 0x0 0x40>;
+			clocks = <&cgi_main>, <&cgi_dpll0>, <&cgi_dpll1>;
+			clock-names = "cgi_main", "cgi_dpll0", "cgi_dpll1";
+			#clock-cells = <1>;
+		};
+
+		rpgate: clock-controller@7030010368 {
+			compatible = "sophgo,sg2042-rpgate";
+			reg = <0x70 0x30010368 0x0 0x98>;
+			clocks = <&clkgen GATE_CLK_RP_CPU_NORMAL>;
+			clock-names = "rpgate";
+			#clock-cells = <1>;
+		};
+
+		clkgen: clock-controller@7030012000 {
+			compatible = "sophgo,sg2042-clkgen";
+			reg = <0x70 0x30012000 0x0 0x1000>;
+			clocks = <&pllclk MPLL_CLK>,
+				 <&pllclk FPLL_CLK>,
+				 <&pllclk DPLL0_CLK>,
+				 <&pllclk DPLL1_CLK>;
+			clock-names = "mpll",
+				      "fpll",
+				      "dpll0",
+				      "dpll1";
+			#clock-cells = <1>;
+		};
+
 		clint_mswi: interrupt-controller@7094000000 {
 			compatible = "sophgo,sg2042-aclint-mswi", "thead,c900-aclint-mswi";
 			reg = <0x00000070 0x94000000 0x00000000 0x00004000>;
@@ -341,6 +391,9 @@
 			interrupt-parent = <&intc>;
 			interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <500000000>;
+			clocks = <&clkgen GATE_CLK_UART_500M>,
+				 <&clkgen GATE_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			resets = <&rstgen RST_UART0>;
diff --git a/dts/upstream/src/riscv/starfive/jh7110-common.dtsi b/dts/upstream/src/riscv/starfive/jh7110-common.dtsi
index 68d16717db8..c7771b3b647 100644
--- a/dts/upstream/src/riscv/starfive/jh7110-common.dtsi
+++ b/dts/upstream/src/riscv/starfive/jh7110-common.dtsi
@@ -294,6 +294,20 @@
 	status = "okay";
 };
 
+&pcie0 {
+	perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
+	phys = <&pciephy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>;
+};
+
+&pcie1 {
+	perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
+	phys = <&pciephy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins>;
+};
+
 &pwmdac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwmdac_pins>;
@@ -321,16 +335,13 @@
 			#size-cells = <1>;
 
 			spl@0 {
-				reg = <0x0 0x80000>;
+				reg = <0x0 0xf0000>;
 			};
 			uboot-env@f0000 {
 				reg = <0xf0000 0x10000>;
 			};
 			uboot@100000 {
-				reg = <0x100000 0x400000>;
-			};
-			reserved-data@600000 {
-				reg = <0x600000 0xa00000>;
+				reg = <0x100000 0xf00000>;
 			};
 		};
 	};
@@ -354,6 +365,12 @@
 	};
 };
 
+&syscrg {
+	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>,
+			  <&pllclk JH7110_PLLCLK_PLL0_OUT>;
+	assigned-clock-rates = <500000000>, <1500000000>;
+};
+
 &sysgpio {
 	i2c0_pins: i2c0-0 {
 		i2c-pins {
@@ -476,6 +493,54 @@
 		};
 	};
 
+	pcie0_pins: pcie0-0 {
+		clkreq-pins {
+			pinmux = <GPIOMUX(27, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			bias-pull-down;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		wake-pins {
+			pinmux = <GPIOMUX(32, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	pcie1_pins: pcie1-0 {
+		clkreq-pins {
+			pinmux = <GPIOMUX(29, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			bias-pull-down;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		wake-pins {
+			pinmux = <GPIOMUX(21, GPOUT_LOW,
+				      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
 	pwmdac_pins: pwmdac-0 {
 		pwmdac-pins {
 			pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
diff --git a/dts/upstream/src/riscv/starfive/jh7110-milkv-mars.dts b/dts/upstream/src/riscv/starfive/jh7110-milkv-mars.dts
index fa0eac78e0b..5cb9e99e1da 100644
--- a/dts/upstream/src/riscv/starfive/jh7110-milkv-mars.dts
+++ b/dts/upstream/src/riscv/starfive/jh7110-milkv-mars.dts
@@ -17,6 +17,13 @@
 	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
 };
 
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
 
 &phy0 {
 	motorcomm,tx-clk-adj-enabled;
diff --git a/dts/upstream/src/riscv/starfive/jh7110-pine64-star64.dts b/dts/upstream/src/riscv/starfive/jh7110-pine64-star64.dts
new file mode 100644
index 00000000000..b720cdd15ed
--- /dev/null
+++ b/dts/upstream/src/riscv/starfive/jh7110-pine64-star64.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2024 Henry Bell <dmoo_dv@protonmail.com>
+ */
+
+/dts-v1/;
+#include "jh7110-common.dtsi"
+
+/ {
+	model = "Pine64 Star64";
+	compatible = "pine64,star64", "starfive,jh7110";
+	aliases {
+		ethernet1 = &gmac1;
+	};
+};
+
+&gmac0 {
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+};
+
+&gmac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>;
+	assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&phy0 {
+	rx-internal-delay-ps = <1900>;
+	tx-internal-delay-ps = <1500>;
+	motorcomm,rx-clk-drv-microamp = <2910>;
+	motorcomm,rx-data-drv-microamp = <2910>;
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-10-inverted;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,tx-clk-1000-inverted;
+};
+
+&phy1 {
+	rx-internal-delay-ps = <0>;
+	tx-internal-delay-ps = <300>;
+	motorcomm,rx-clk-drv-microamp = <2910>;
+	motorcomm,rx-data-drv-microamp = <2910>;
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-10-inverted;
+	motorcomm,tx-clk-100-inverted;
+};
diff --git a/dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi b/dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
index 9d70f21c86f..18f38fc790a 100644
--- a/dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -32,3 +32,11 @@
 &mmc0 {
 	non-removable;
 };
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/dts/upstream/src/riscv/starfive/jh7110.dtsi b/dts/upstream/src/riscv/starfive/jh7110.dtsi
index 18047195c60..0d8339357ba 100644
--- a/dts/upstream/src/riscv/starfive/jh7110.dtsi
+++ b/dts/upstream/src/riscv/starfive/jh7110.dtsi
@@ -387,12 +387,13 @@
 		};
 
 		uart0: serial@10000000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10000000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART0_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART0_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART0_APB>,
+				 <&syscrg JH7110_SYSRST_UART0_CORE>;
 			interrupts = <32>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -400,12 +401,13 @@
 		};
 
 		uart1: serial@10010000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10010000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART1_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART1_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART1_APB>,
+				 <&syscrg JH7110_SYSRST_UART1_CORE>;
 			interrupts = <33>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -413,12 +415,13 @@
 		};
 
 		uart2: serial@10020000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x10020000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART2_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART2_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART2_APB>,
+				 <&syscrg JH7110_SYSRST_UART2_CORE>;
 			interrupts = <34>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -642,12 +645,13 @@
 		};
 
 		uart3: serial@12000000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12000000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART3_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART3_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART3_APB>,
+				 <&syscrg JH7110_SYSRST_UART3_CORE>;
 			interrupts = <45>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -655,12 +659,13 @@
 		};
 
 		uart4: serial@12010000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12010000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART4_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART4_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART4_APB>,
+				 <&syscrg JH7110_SYSRST_UART4_CORE>;
 			interrupts = <46>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -668,12 +673,13 @@
 		};
 
 		uart5: serial@12020000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "starfive,jh7110-uart", "snps,dw-apb-uart";
 			reg = <0x0 0x12020000 0x0 0x10000>;
 			clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
 				 <&syscrg JH7110_SYSCLK_UART5_APB>;
 			clock-names = "baudclk", "apb_pclk";
-			resets = <&syscrg JH7110_SYSRST_UART5_APB>;
+			resets = <&syscrg JH7110_SYSRST_UART5_APB>,
+				 <&syscrg JH7110_SYSRST_UART5_CORE>;
 			interrupts = <47>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
@@ -1214,5 +1220,91 @@
 			#reset-cells = <1>;
 			power-domains = <&pwrc JH7110_PD_VOUT>;
 		};
+
+		pcie0: pcie@940000000 {
+			compatible = "starfive,jh7110-pcie";
+			reg = <0x9 0x40000000 0x0 0x1000000>,
+			      <0x0 0x2b000000 0x0 0x100000>;
+			reg-names = "cfg", "apb";
+			linux,pci-domain = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x82000000  0x0 0x30000000  0x0 0x30000000 0x0 0x08000000>,
+				 <0xc3000000  0x9 0x00000000  0x9 0x00000000 0x0 0x40000000>;
+			interrupts = <56>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
+			msi-controller;
+			device_type = "pci";
+			starfive,stg-syscon = <&stg_syscon>;
+			bus-range = <0x0 0xff>;
+			clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+				 <&stgcrg JH7110_STGCLK_PCIE0_TL>,
+				 <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>,
+				 <&stgcrg JH7110_STGCLK_PCIE0_APB>;
+			clock-names = "noc", "tl", "axi_mst0", "apb";
+			resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>,
+				 <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>,
+				 <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>,
+				 <&stgcrg JH7110_STGRST_PCIE0_BRG>,
+				 <&stgcrg JH7110_STGRST_PCIE0_CORE>,
+				 <&stgcrg JH7110_STGRST_PCIE0_APB>;
+			reset-names = "mst0", "slv0", "slv", "brg",
+				      "core", "apb";
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie1: pcie@9c0000000 {
+			compatible = "starfive,jh7110-pcie";
+			reg = <0x9 0xc0000000 0x0 0x1000000>,
+			      <0x0 0x2c000000 0x0 0x100000>;
+			reg-names = "cfg", "apb";
+			linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x82000000  0x0 0x38000000  0x0 0x38000000 0x0 0x08000000>,
+				 <0xc3000000  0x9 0x80000000  0x9 0x80000000 0x0 0x40000000>;
+			interrupts = <57>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc1 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc1 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc1 0x4>;
+			msi-controller;
+			device_type = "pci";
+			starfive,stg-syscon = <&stg_syscon>;
+			bus-range = <0x0 0xff>;
+			clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+				 <&stgcrg JH7110_STGCLK_PCIE1_TL>,
+				 <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>,
+				 <&stgcrg JH7110_STGCLK_PCIE1_APB>;
+			clock-names = "noc", "tl", "axi_mst0", "apb";
+			resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>,
+				 <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>,
+				 <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>,
+				 <&stgcrg JH7110_STGRST_PCIE1_BRG>,
+				 <&stgcrg JH7110_STGRST_PCIE1_CORE>,
+				 <&stgcrg JH7110_STGRST_PCIE1_APB>;
+			reset-names = "mst0", "slv0", "slv", "brg",
+				      "core", "apb";
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
 	};
 };
diff --git a/dts/upstream/src/riscv/thead/th1520.dtsi b/dts/upstream/src/riscv/thead/th1520.dtsi
index d2fa2583901..3c9974062c2 100644
--- a/dts/upstream/src/riscv/thead/th1520.dtsi
+++ b/dts/upstream/src/riscv/thead/th1520.dtsi
@@ -122,6 +122,87 @@
 		};
 	};
 
+	pmu {
+		compatible = "riscv,pmu";
+		riscv,event-to-mhpmcounters =
+			<0x00003 0x00003 0x0007fff8>,
+			<0x00004 0x00004 0x0007fff8>,
+			<0x00005 0x00005 0x0007fff8>,
+			<0x00006 0x00006 0x0007fff8>,
+			<0x00007 0x00007 0x0007fff8>,
+			<0x00008 0x00008 0x0007fff8>,
+			<0x00009 0x00009 0x0007fff8>,
+			<0x0000a 0x0000a 0x0007fff8>,
+			<0x10000 0x10000 0x0007fff8>,
+			<0x10001 0x10001 0x0007fff8>,
+			<0x10002 0x10002 0x0007fff8>,
+			<0x10003 0x10003 0x0007fff8>,
+			<0x10010 0x10010 0x0007fff8>,
+			<0x10011 0x10011 0x0007fff8>,
+			<0x10012 0x10012 0x0007fff8>,
+			<0x10013 0x10013 0x0007fff8>;
+		riscv,event-to-mhpmevent =
+			<0x00003 0x00000000 0x00000001>,
+			<0x00004 0x00000000 0x00000002>,
+			<0x00006 0x00000000 0x00000006>,
+			<0x00005 0x00000000 0x00000007>,
+			<0x00007 0x00000000 0x00000008>,
+			<0x00008 0x00000000 0x00000009>,
+			<0x00009 0x00000000 0x0000000a>,
+			<0x0000a 0x00000000 0x0000000b>,
+			<0x10000 0x00000000 0x0000000c>,
+			<0x10001 0x00000000 0x0000000d>,
+			<0x10002 0x00000000 0x0000000e>,
+			<0x10003 0x00000000 0x0000000f>,
+			<0x10010 0x00000000 0x00000010>,
+			<0x10011 0x00000000 0x00000011>,
+			<0x10012 0x00000000 0x00000012>,
+			<0x10013 0x00000000 0x00000013>;
+		riscv,raw-event-to-mhpmcounters =
+			<0x00000000 0x00000001 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000002 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000003 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000004 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000005 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000006 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000007 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000008 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000009 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000000a 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000000b 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000000c 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000000d 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000000e 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000000f 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000010 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000011 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000012 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000013 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000014 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000015 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000016 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000017 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000018 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000019 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000001a 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000001b 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000001c 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000001d 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000001e 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000001f 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000020 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000021 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000022 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000023 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000024 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000025 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000026 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000027 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000028 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x00000029 0xffffffff 0xffffffff 0x0007fff8>,
+			<0x00000000 0x0000002a 0xffffffff 0xffffffff 0x0007fff8>;
+	};
+
 	osc: oscillator {
 		compatible = "fixed-clock";
 		clock-output-names = "osc_24m";
diff --git a/env/mmc.c b/env/mmc.c
index 0338aa6c56a..e2f8e7ece28 100644
--- a/env/mmc.c
+++ b/env/mmc.c
@@ -53,11 +53,74 @@ DECLARE_GLOBAL_DATA_PTR;
 #endif
 
 #if CONFIG_IS_ENABLED(OF_CONTROL)
+
+static int mmc_env_partition_by_name(struct blk_desc *desc, const char *str,
+				     struct disk_partition *info)
+{
+	int i, ret;
+
+	for (i = 1;; i++) {
+		ret = part_get_info(desc, i, info);
+		if (ret < 0)
+			return ret;
+
+		if (!strncmp((const char *)info->name, str, sizeof(info->name)))
+			return 0;
+	}
+}
+
+/*
+ * Look for one or two partitions with the U-Boot environment GUID.
+ *
+ * If *copy is 0, return the first such partition.
+ *
+ * If *copy is 1 on entry and two partitions are found, return the
+ * second partition and set *copy = 0.
+ *
+ * If *copy is 1 on entry and only one partition is found, return that
+ * partition, leaving *copy unmodified.
+ */
+static int mmc_env_partition_by_guid(struct blk_desc *desc, struct disk_partition *info,
+				     int *copy)
+{
+	const efi_guid_t env_guid = PARTITION_U_BOOT_ENVIRONMENT;
+	efi_guid_t type_guid;
+	int i, ret, found = 0;
+	struct disk_partition dp;
+
+	for (i = 1;; i++) {
+		ret = part_get_info(desc, i, &dp);
+		if (ret < 0)
+			break;
+
+		uuid_str_to_bin(disk_partition_type_guid(&dp), type_guid.b, UUID_STR_FORMAT_GUID);
+		if (!memcmp(&env_guid, &type_guid, sizeof(efi_guid_t))) {
+			memcpy(info, &dp, sizeof(dp));
+			/* If *copy is 0, we are only looking for the first partition. */
+			if (*copy == 0)
+				return 0;
+			/* This was the second such partition. */
+			if (found) {
+				*copy = 0;
+				return 0;
+			}
+			found = 1;
+		}
+	}
+
+	/* The loop ended after finding at most one matching partition. */
+	if (found)
+		ret = 0;
+	return ret;
+}
+
+
 static inline int mmc_offset_try_partition(const char *str, int copy, s64 *val)
 {
 	struct disk_partition info;
 	struct blk_desc *desc;
-	int len, i, ret;
+	lbaint_t len;
+	int ret;
 	char dev_str[4];
 
 	snprintf(dev_str, sizeof(dev_str), "%d", mmc_get_env_dev());
@@ -65,28 +128,24 @@ static inline int mmc_offset_try_partition(const char *str, int copy, s64 *val)
 	if (ret < 0)
 		return (ret);
 
-	for (i = 1;;i++) {
-		ret = part_get_info(desc, i, &info);
-		if (ret < 0)
-			return ret;
-
-		if (str && !strncmp((const char *)info.name, str, sizeof(info.name)))
-			break;
-#ifdef CONFIG_PARTITION_TYPE_GUID
-		if (!str) {
-			const efi_guid_t env_guid = PARTITION_U_BOOT_ENVIRONMENT;
-			efi_guid_t type_guid;
-
-			uuid_str_to_bin(info.type_guid, type_guid.b, UUID_STR_FORMAT_GUID);
-			if (!memcmp(&env_guid, &type_guid, sizeof(efi_guid_t)))
-				break;
-		}
-#endif
+	if (str) {
+		ret = mmc_env_partition_by_name(desc, str, &info);
+	} else if (IS_ENABLED(CONFIG_PARTITION_TYPE_GUID) && !str) {
+		ret = mmc_env_partition_by_guid(desc, &info, &copy);
 	}
+	if (ret < 0)
+		return ret;
 
 	/* round up to info.blksz */
 	len = DIV_ROUND_UP(CONFIG_ENV_SIZE, info.blksz);
 
+	if ((1 + copy) * len > info.size) {
+		printf("Partition '%s' [0x"LBAF"; 0x"LBAF"] too small for %senvironment, required size 0x"LBAF" blocks\n",
+		       (const char*)info.name, info.start, info.size,
+		       copy ? "two copies of " : "", (1 + copy)*len);
+		return -ENOSPC;
+	}
+
 	/* use the top of the partion for the environment */
 	*val = (info.start + info.size - (1 + copy) * len) * info.blksz;
 
diff --git a/fs/Makefile b/fs/Makefile
index 7b05c79e0cc..a3ee0a361d3 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -5,7 +5,7 @@
 # Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
 
 ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_FS_LOADER) += fs.o
+obj-$(CONFIG_SPL_FS_LOADER) += fs.o
 obj-$(CONFIG_SPL_FS_FAT) += fat/
 obj-$(CONFIG_SPL_FS_EXT4) += ext4/
 obj-$(CONFIG_SPL_FS_CBFS) += cbfs/
diff --git a/include/atf_common.h b/include/atf_common.h
index 5ae45090252..03cfcc69cd7 100644
--- a/include/atf_common.h
+++ b/include/atf_common.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause */
 /*
  * This is from the ARM TF Project,
- * Repository: https://github.com/ARM-software/arm-trusted-firmware.git
+ * Repository: https://github.com/TrustedFirmware-A/trusted-firmware-a.git
  * File: include/common/bl_common.h
  * Portions copyright (c) 2013-2016, ARM Limited and Contributors. All rights
  * reserved.
diff --git a/include/bootdev.h b/include/bootdev.h
index 2cee8832d26..ad4af0d1310 100644
--- a/include/bootdev.h
+++ b/include/bootdev.h
@@ -395,6 +395,7 @@ int bootdev_next_prio(struct bootflow_iter *iter, struct udevice **devp);
  */
 int bootdev_setup_for_dev(struct udevice *parent, const char *drv_name);
 
+#if CONFIG_IS_ENABLED(BOOTSTD)
 /**
  * bootdev_setup_for_sibling_blk() - Bind a new bootdev device for a blk device
  *
@@ -409,6 +410,13 @@ int bootdev_setup_for_dev(struct udevice *parent, const char *drv_name);
  * Return: 0 if OK, -ve on error
  */
 int bootdev_setup_for_sibling_blk(struct udevice *blk, const char *drv_name);
+#else
+static int bootdev_setup_for_sibling_blk(struct udevice *blk,
+					 const char *drv_name)
+{
+	return 0;
+}
+#endif
 
 /**
  * bootdev_get_sibling_blk() - Locate the block device for a bootdev
diff --git a/include/configs/sc573-ezkit.h b/include/configs/sc573-ezkit.h
new file mode 100644
index 00000000000..42e42f8150b
--- /dev/null
+++ b/include/configs/sc573-ezkit.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#ifndef __CONFIG_SC573_EZKIT_H
+#define __CONFIG_SC573_EZKIT_H
+
+/*
+ * Memory Settings
+ */
+#define MEM_MT41K128M16JT
+#define MEM_DMC0
+
+#define CFG_SYS_SDRAM_BASE	0x82000000
+#define CFG_SYS_SDRAM_SIZE	0xe000000
+
+#endif
diff --git a/include/configs/sc584-ezkit.h b/include/configs/sc584-ezkit.h
new file mode 100644
index 00000000000..905836cc2cf
--- /dev/null
+++ b/include/configs/sc584-ezkit.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#ifndef __CONFIG_SC584_EZKIT_H
+#define __CONFIG_SC584_EZKIT_H
+
+/*
+ * Memory Settings
+ */
+#define MEM_MT47H128M16RT
+#define MEM_DMC0
+
+#define CFG_SYS_SDRAM_BASE	0x89000000
+#define CFG_SYS_SDRAM_SIZE	0x7000000
+
+#endif
diff --git a/include/configs/sc589.h b/include/configs/sc589.h
new file mode 100644
index 00000000000..137c80be8e5
--- /dev/null
+++ b/include/configs/sc589.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#ifndef __CONFIG_SC589_H
+#define __CONFIG_SC589_H
+
+/*
+ * Memory Settings
+ */
+#define MEM_MT41K128M16JT
+#define MEM_DMC0
+#define MEM_DMC1
+
+#define CFG_SYS_SDRAM_BASE	0xC2000000
+#define CFG_SYS_SDRAM_SIZE	0xe000000
+
+#endif
diff --git a/include/configs/sc594-som.h b/include/configs/sc594-som.h
new file mode 100644
index 00000000000..ba9b0cdb0c0
--- /dev/null
+++ b/include/configs/sc594-som.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#ifndef __CONFIG_SC594_SOM_H
+#define __CONFIG_SC594_SOM_H
+
+/*
+ * Memory Settings
+ */
+#define MEM_IS43TR16512BL
+#define MEM_ISSI_8Gb_DDR3_800MHZ
+#define MEM_DMC0
+
+#define CFG_SYS_SDRAM_BASE	0xA0000000
+#define CFG_SYS_SDRAM_SIZE	0x20000000
+
+#endif
diff --git a/include/configs/sc598-som.h b/include/configs/sc598-som.h
new file mode 100644
index 00000000000..964c694bbe7
--- /dev/null
+++ b/include/configs/sc598-som.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * (C) Copyright 2024 - Analog Devices, Inc.
+ */
+
+#ifndef __CONFIG_SC598_SOM_H
+#define __CONFIG_SC598_SOM_H
+
+/*
+ * Memory Settings
+ */
+#define MEM_IS43TR16512BL
+#define MEM_ISSI_4Gb_DDR3_800MHZ
+#define MEM_DMC0
+
+#define CFG_SYS_SDRAM_BASE	0x90000000
+#define CFG_SYS_SDRAM_SIZE	0x0e000000
+
+/* GIC */
+#define GICD_BASE 0x31200000
+#define GICR_BASE 0x31240000
+
+#endif
diff --git a/include/dfu.h b/include/dfu.h
index 6c5431b3948..e25588c33cb 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -517,6 +517,7 @@ static inline int dfu_fill_entity_virt(struct dfu_entity *dfu, char *devstr,
 #endif
 
 extern bool dfu_reinit_needed;
+extern bool dfu_alt_info_changed;
 
 #if CONFIG_IS_ENABLED(DFU_WRITE_ALT)
 /**
diff --git a/include/efi_variable.h b/include/efi_variable.h
index 223bb9a4a5b..4065cf45eca 100644
--- a/include/efi_variable.h
+++ b/include/efi_variable.h
@@ -38,7 +38,7 @@ efi_status_t efi_get_variable_int(const u16 *variable_name,
 				  void *data, u64 *timep);
 
 /**
- * efi_set_variable() - set value of a UEFI variable
+ * efi_set_variable_int() - set value of a UEFI variable
  *
  * @variable_name:	name of the variable
  * @vendor:		vendor GUID
diff --git a/include/env/ti/android.env b/include/env/ti/android.env
new file mode 100644
index 00000000000..a058beb7fc4
--- /dev/null
+++ b/include/env/ti/android.env
@@ -0,0 +1,31 @@
+/* Android partitions
+ * += is needed because \n is converted by space in .env files */
+partitions=name=bootloader,start=5M,size=8M,uuid=${uuid_gpt_bootloader};
+partitions+=name=tiboot3,start=4M,size=1M,uuid=${uuid_gpt_tiboot3};
+partitions+=name=misc,start=13824K,size=512K,uuid=${uuid_gpt_misc};
+partitions+=name=frp,size=512K,uuid=${uuid_gpt_frp};
+partitions+=name=boot_a,size=40M,uuid=${uuid_gpt_boot_a};
+partitions+=name=boot_b,size=40M,uuid=${uuid_gpt_boot_b};
+partitions+=name=vendor_boot_a,size=32M,uuid=${uuid_gpt_vendor_boot_a};
+partitions+=name=vendor_boot_b,size=32M,uuid=${uuid_gpt_vendor_boot_b};
+partitions+=name=init_boot_a,size=8M,uuid=${uuid_gpt_init_boot_a};
+partitions+=name=init_boot_b,size=8M,uuid=${uuid_gpt_init_boot_b};
+partitions+=name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a};
+partitions+=name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b};
+partitions+=name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a};
+partitions+=name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b};
+partitions+=name=vbmeta_vendor_dlkm_a,size=64K,uuid=${uuid_gpt_vbmeta_vendor_dlkm_a};
+partitions+=name=vbmeta_vendor_dlkm_b,size=64K,uuid=${uuid_gpt_vbmeta_vendor_dlkm_b};
+partitions+=name=super,size=4608M,uuid=${uuid_gpt_super};
+partitions+=name=metadata,size=64M,uuid=${uuid_gpt_metadata};
+partitions+=name=persist,size=32M,uuid=${uuid_gpt_persist};
+partitions+=name=userdata,size=-,uuid=${uuid_gpt_userdata}
+
+fastboot_raw_partition_bootenv=0x800 0x400 mmcpart 1
+fastboot.partition-type:metadata=f2fs
+
+boot_targets=mmc0
+mmcdev=0
+bootmeths=android
+vendor_boot_comp_addr_r=0xd0000000
+bootcmd=bootflow scan -lb
diff --git a/include/env_callback.h b/include/env_callback.h
index 8e500aaaf80..66cc8309e71 100644
--- a/include/env_callback.h
+++ b/include/env_callback.h
@@ -69,6 +69,12 @@
 #define BOOTSTD_CALLBACK
 #endif
 
+#ifdef CONFIG_DFU
+#define DFU_CALLBACK "dfu_alt_info:dfu_alt_info,"
+#else
+#define DFU_CALLBACK
+#endif
+
 /*
  * This list of callback bindings is static, but may be overridden by defining
  * a new association in the ".callbacks" environment variable.
@@ -79,6 +85,7 @@
 	NET_CALLBACKS \
 	NET6_CALLBACKS \
 	BOOTSTD_CALLBACK \
+	DFU_CALLBACK \
 	"loadaddr:loadaddr," \
 	SILENT_CALLBACK \
 	"stdin:console,stdout:console,stderr:console," \
diff --git a/include/event.h b/include/event.h
index fb353ad623e..75141a192a4 100644
--- a/include/event.h
+++ b/include/event.h
@@ -385,7 +385,7 @@ static inline int event_notify_null(enum event_t type)
 int event_uninit(void);
 
 /**
- * event_uninit() - Set up dynamic events
+ * event_init() - Set up dynamic events
  *
  * Init a list of dynamic event handlers, so that these can be added as
  * needed
diff --git a/include/expo.h b/include/expo.h
index 264745f7f01..c235fa2709d 100644
--- a/include/expo.h
+++ b/include/expo.h
@@ -42,7 +42,7 @@ enum expoact_type {
  *
  * @type: Action type (EXPOACT_NONE if there is no action)
  * @select: Used for EXPOACT_POINT_ITEM and EXPOACT_SELECT
- * @id: ID number of the object affected.
+ * @select.id: ID number of the object affected.
  */
 struct expo_action {
 	enum expoact_type type;
diff --git a/include/flash.h b/include/flash.h
index 60babe8a805..32bc65e7b60 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -127,16 +127,16 @@ void flash_perror(int err);
 /*-----------------------------------------------------------------------
  * return codes from flash_write():
  */
-#define ERR_OK				0
-#define ERR_TIMEOUT			1
-#define ERR_NOT_ERASED			2
-#define ERR_PROTECTED			4
-#define ERR_INVAL			8
-#define ERR_ALIGN			16
-#define ERR_UNKNOWN_FLASH_VENDOR	32
-#define ERR_UNKNOWN_FLASH_TYPE		64
-#define ERR_PROG_ERROR			128
-#define ERR_ABORTED			256
+#define FL_ERR_OK			0
+#define FL_ERR_TIMEOUT			1
+#define FL_ERR_NOT_ERASED		2
+#define FL_ERR_PROTECTED		4
+#define FL_ERR_INVAL			8
+#define FL_ERR_ALIGN			16
+#define FL_ERR_UNKNOWN_FLASH_VENDOR	32
+#define FL_ERR_UNKNOWN_FLASH_TYPE	64
+#define FL_ERR_PROG_ERROR		128
+#define FL_ERR_ABORTED			256
 
 /*-----------------------------------------------------------------------
  * Protection Flags for flash_protect():
diff --git a/include/fsl_esdhc_imx.h b/include/fsl_esdhc_imx.h
index b8efd2a1664..8612b56609e 100644
--- a/include/fsl_esdhc_imx.h
+++ b/include/fsl_esdhc_imx.h
@@ -31,6 +31,7 @@
 #define SYSCTL_RSTA		0x01000000
 #define SYSCTL_RSTC		0x02000000
 #define SYSCTL_RSTD		0x04000000
+#define SYSCTL_RSTT		0x10000000
 
 #define VENDORSPEC_CKEN		0x00004000
 #define VENDORSPEC_PEREN	0x00002000
diff --git a/include/getopt.h b/include/getopt.h
index 8645082da2a..0cf7ee84d6f 100644
--- a/include/getopt.h
+++ b/include/getopt.h
@@ -20,11 +20,9 @@ struct getopt_state {
 	 * parsed all of @argv, then @index will equal @argc.
 	 */
 	int index;
-	/* private: */
 	/** @arg_index: Index within the current argument */
 	int arg_index;
 	union {
-		/* public: */
 		/**
 		 * @opt: Option being parsed when an error occurs. @opt is only
 		 * valid when getopt() returns ``?`` or ``:``.
@@ -35,7 +33,6 @@ struct getopt_state {
 		 * is only valid when getopt() returns an option character.
 		 */
 		char *arg;
-	/* private: */
 	};
 };
 
diff --git a/include/gzip.h b/include/gzip.h
index 5e0d0ec07fb..304002ffc42 100644
--- a/include/gzip.h
+++ b/include/gzip.h
@@ -28,7 +28,8 @@ int gzip_parse_header(const unsigned char *src, unsigned long len);
  * @dst: Destination for uncompressed data
  * @dstlen: Size of destination buffer
  * @src: Source data to decompress
- * @lenp: Returns length of uncompressed data
+ * @lenp: On entry, length of data at @src. On exit, number of bytes used from
+ * @src
  * Return: 0 if OK, -1 on error
  */
 int gunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp);
@@ -39,7 +40,8 @@ int gunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp);
  * @dst: Destination for uncompressed data
  * @dstlen: Size of destination buffer
  * @src: Source data to decompress
- * @lenp: On entry, length data at @src. On exit, number of bytes used from @src
+ * @lenp: On entry, length of data at @src. On exit, number of bytes used from
+ * @src
  * @stoponerr: 0 to continue when a decode error is found, 1 to stop
  * @offset: start offset within the src buffer
  * Return: 0 if OK, -1 on error
diff --git a/include/lmb.h b/include/lmb.h
index fc2daaa7bfc..aee2f9fcdaa 100644
--- a/include/lmb.h
+++ b/include/lmb.h
@@ -111,6 +111,11 @@ struct lmb *lmb_get(void);
 int lmb_push(struct lmb *store);
 void lmb_pop(struct lmb *store);
 
+static inline int lmb_read_check(phys_addr_t addr, phys_size_t len)
+{
+	return lmb_alloc_addr(addr, len) == addr ? 0 : -1;
+}
+
 #endif /* __KERNEL__ */
 
 #endif /* _LINUX_LMB_H */
diff --git a/include/mmc.h b/include/mmc.h
index f508cd15700..0044ff8bef7 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -14,6 +14,7 @@
 #include <linux/sizes.h>
 #include <linux/compiler.h>
 #include <linux/dma-direction.h>
+#include <cyclic.h>
 #include <part.h>
 
 struct bd_info;
@@ -757,6 +758,8 @@ struct mmc {
 	bool hs400_tuning:1;
 
 	enum bus_mode user_speed_mode; /* input speed mode from user */
+
+	CONFIG_IS_ENABLED(CYCLIC, (struct cyclic_info cyclic));
 };
 
 #if CONFIG_IS_ENABLED(DM_MMC)
diff --git a/include/os.h b/include/os.h
index 4371270a1ee..ae3ca6d42a2 100644
--- a/include/os.h
+++ b/include/os.h
@@ -24,7 +24,7 @@ struct sandbox_state;
 int os_printf(const char *format, ...);
 
 /**
- * Access to the OS read() system call
+ * os_read() - access the OS read() system call
  *
  * @fd:		File descriptor as returned by os_open()
  * @buf:	Buffer to place data
@@ -34,7 +34,7 @@ int os_printf(const char *format, ...);
 ssize_t os_read(int fd, void *buf, size_t count);
 
 /**
- * Access to the OS write() system call
+ * os_write() - access the OS write() system call
  *
  * @fd:		File descriptor as returned by os_open()
  * @buf:	Buffer containing data to write
@@ -44,7 +44,7 @@ ssize_t os_read(int fd, void *buf, size_t count);
 ssize_t os_write(int fd, const void *buf, size_t count);
 
 /**
- * Access to the OS lseek() system call
+ * os_lseek() - access the OS lseek() system call
  *
  * @fd:		File descriptor as returned by os_open()
  * @offset:	File offset (based on whence)
@@ -67,7 +67,7 @@ off_t os_lseek(int fd, off_t offset, int whence);
 off_t os_filesize(int fd);
 
 /**
- * Access to the OS open() system call
+ * os_open() - access the OS open() system call
  *
  * @pathname:	Pathname of file to open
  * @flags:	Flags, like OS_O_RDONLY, OS_O_RDWR
@@ -162,7 +162,7 @@ void os_raise_sigalrm(void);
 void os_tty_raw(int fd, bool allow_sigs);
 
 /**
- * os_fs_restore() - restore the tty to its original mode
+ * os_fd_restore() - restore the tty to its original mode
  *
  * Call this to restore the original terminal mode, after it has been changed
  * by os_tty_raw(). This is an internal function.
@@ -207,14 +207,14 @@ void *os_realloc(void *ptr, size_t length);
 void os_usleep(unsigned long usec);
 
 /**
- * Gets a monotonic increasing number of nano seconds from the OS
+ * os_get_nsec() - get monotonically increasing number of nano seconds from OS
  *
- * Return:	a monotonic increasing time scaled in nano seconds
+ * Return:	a monotoniccally increasing time scaled in nano seconds
  */
 uint64_t os_get_nsec(void);
 
 /**
- * Parse arguments and update sandbox state.
+ * os_parse_args() - parse arguments and update sandbox state.
  *
  * @state:	sandbox state to update
  * @argc:	argument count
diff --git a/include/power/regulator.h b/include/power/regulator.h
index bb07a814c79..8a914dfc74f 100644
--- a/include/power/regulator.h
+++ b/include/power/regulator.h
@@ -415,26 +415,6 @@ int regulator_get_mode(struct udevice *dev);
 int regulator_set_mode(struct udevice *dev, int mode_id);
 
 /**
- * regulators_enable_boot_on() - enable regulators needed for boot
- *
- * This enables all regulators which are marked to be on at boot time. This
- * only works for regulators which don't have a range for voltage/current,
- * since in that case it is not possible to know which value to use.
- *
- * This effectively calls regulator_autoset() for every regulator.
- */
-int regulators_enable_boot_on(bool verbose);
-
-/**
- * regulators_enable_boot_off() - disable regulators needed for boot
- *
- * This disables all regulators which are marked to be off at boot time.
- *
- * This effectively calls regulator_unset() for every regulator.
- */
-int regulators_enable_boot_off(bool verbose);
-
-/**
  * regulator_autoset: setup the voltage/current on a regulator
  *
  * The setup depends on constraints found in device's uclass's platform data
@@ -454,18 +434,6 @@ int regulators_enable_boot_off(bool verbose);
 int regulator_autoset(struct udevice *dev);
 
 /**
- * regulator_unset: turn off a regulator
- *
- * The setup depends on constraints found in device's uclass's platform data
- * (struct dm_regulator_uclass_platdata):
- *
- * - Disable - will set - if  'force_off' is set to true,
- *
- * The function returns on the first-encountered error.
- */
-int regulator_unset(struct udevice *dev);
-
-/**
  * regulator_autoset_by_name: setup the regulator given by its uclass's
  * platform data name field. The setup depends on constraints found in device's
  * uclass's platform data (struct dm_regulator_uclass_plat):
@@ -629,11 +597,6 @@ static inline int regulator_set_mode(struct udevice *dev, int mode_id)
 	return -ENOSYS;
 }
 
-static inline int regulators_enable_boot_on(bool verbose)
-{
-	return -ENOSYS;
-}
-
 static inline int regulator_autoset(struct udevice *dev)
 {
 	return -ENOSYS;
diff --git a/include/u-boot/ecdsa.h b/include/u-boot/ecdsa.h
index 53490c6b287..8f9f5e7d6e7 100644
--- a/include/u-boot/ecdsa.h
+++ b/include/u-boot/ecdsa.h
@@ -65,5 +65,6 @@ int ecdsa_verify(struct image_sign_info *info,
 /** @} */
 
 #define ECDSA256_BYTES	(256 / 8)
+#define ECDSA521_BYTES	((521 + 7) / 8)
 
 #endif
diff --git a/lib/ecdsa/ecdsa-libcrypto.c b/lib/ecdsa/ecdsa-libcrypto.c
index 5fa9be10b4b..1c5dde60691 100644
--- a/lib/ecdsa/ecdsa-libcrypto.c
+++ b/lib/ecdsa/ecdsa-libcrypto.c
@@ -108,7 +108,7 @@ static size_t ecdsa_key_size_bytes(const EC_KEY *key)
 	const EC_GROUP *group;
 
 	group = EC_KEY_get0_group(key);
-	return EC_GROUP_order_bits(group) / 8;
+	return (EC_GROUP_order_bits(group) + 7) / 8;
 }
 
 static int default_password(char *buf, int size, int rwflag, void *u)
@@ -272,7 +272,8 @@ int ecdsa_verify(struct image_sign_info *info,
 	return ret;
 }
 
-static int do_add(struct signer *ctx, void *fdt, const char *key_node_name)
+static int do_add(struct signer *ctx, void *fdt, const char *key_node_name,
+		  struct image_sign_info *info)
 {
 	int signature_node, key_node, ret, key_bits;
 	const char *curve_name;
@@ -281,16 +282,35 @@ static int do_add(struct signer *ctx, void *fdt, const char *key_node_name)
 	BIGNUM *x, *y;
 
 	signature_node = fdt_subnode_offset(fdt, 0, FIT_SIG_NODENAME);
-	if (signature_node < 0) {
-		fprintf(stderr, "Could not find 'signature node: %s\n",
+	if (signature_node == -FDT_ERR_NOTFOUND) {
+		signature_node = fdt_add_subnode(fdt, 0, FIT_SIG_NODENAME);
+		if (signature_node < 0) {
+			if (signature_node != -FDT_ERR_NOSPACE) {
+				fprintf(stderr, "Couldn't create signature node: %s\n",
+					fdt_strerror(signature_node));
+			}
+			return signature_node;
+		}
+	} else if (signature_node < 0) {
+		fprintf(stderr, "Cannot select keys signature_node: %s\n",
 			fdt_strerror(signature_node));
 		return signature_node;
 	}
 
-	key_node = fdt_add_subnode(fdt, signature_node, key_node_name);
-	if (key_node < 0) {
-		fprintf(stderr, "Could not create '%s' node: %s\n",
-			key_node_name, fdt_strerror(key_node));
+	/* Either create or overwrite the named key node */
+	key_node = fdt_subnode_offset(fdt, signature_node, key_node_name);
+	if (key_node == -FDT_ERR_NOTFOUND) {
+		key_node = fdt_add_subnode(fdt, signature_node, key_node_name);
+		if (key_node < 0) {
+			if (key_node != -FDT_ERR_NOSPACE) {
+				fprintf(stderr, "Could not create key subnode: %s\n",
+					fdt_strerror(key_node));
+			}
+			return key_node;
+		}
+	} else if (key_node < 0) {
+		fprintf(stderr, "Cannot select keys key_node: %s\n",
+			fdt_strerror(key_node));
 		return key_node;
 	}
 
@@ -303,6 +323,11 @@ static int do_add(struct signer *ctx, void *fdt, const char *key_node_name)
 	point = EC_KEY_get0_public_key(ctx->ecdsa_key);
 	EC_POINT_get_affine_coordinates(group, point, x, y, NULL);
 
+	ret = fdt_setprop_string(fdt, key_node, FIT_KEY_HINT,
+				 info->keyname);
+	if (ret < 0)
+		return ret;
+
 	ret = fdt_setprop_string(fdt, key_node, "ecdsa,curve", curve_name);
 	if (ret < 0)
 		return ret;
@@ -315,6 +340,16 @@ static int do_add(struct signer *ctx, void *fdt, const char *key_node_name)
 	if (ret < 0)
 		return ret;
 
+	ret = fdt_setprop_string(fdt, key_node, FIT_ALGO_PROP,
+				 info->name);
+	if (ret < 0)
+		return ret;
+
+	ret = fdt_setprop_string(fdt, key_node, FIT_KEY_REQUIRED,
+				 info->require_keys);
+	if (ret < 0)
+		return ret;
+
 	return key_node;
 }
 
@@ -326,8 +361,11 @@ int ecdsa_add_verify_data(struct image_sign_info *info, void *fdt)
 
 	fdt_key_name = info->keyname ? info->keyname : "default-key";
 	ret = prepare_ctx(&ctx, info);
-	if (ret >= 0)
-		ret = do_add(&ctx, fdt, fdt_key_name);
+	if (ret >= 0) {
+		ret = do_add(&ctx, fdt, fdt_key_name, info);
+		if (ret < 0)
+			ret = ret == -FDT_ERR_NOSPACE ? -ENOSPC : -EIO;
+	}
 
 	free_ctx(&ctx);
 	return ret;
diff --git a/lib/efi_loader/efi_console.c b/lib/efi_loader/efi_console.c
index cea50c748aa..9d9f786a6db 100644
--- a/lib/efi_loader/efi_console.c
+++ b/lib/efi_loader/efi_console.c
@@ -100,7 +100,7 @@ static int term_get_char(s32 *c)
 }
 
 /**
- * Receive and parse a reply from the terminal.
+ * term_read_reply() - receive and parse a reply from the terminal
  *
  * @n:		array of return values
  * @num:	number of return values expected
diff --git a/lib/efi_loader/efi_file.c b/lib/efi_loader/efi_file.c
index 222001d6a3b..c92d8ccf004 100644
--- a/lib/efi_loader/efi_file.c
+++ b/lib/efi_loader/efi_file.c
@@ -295,7 +295,7 @@ out:
 }
 
 /**
- * efi_file_open_()
+ * efi_file_open() - open file synchronously
  *
  * This function implements the Open service of the File Protocol.
  * See the UEFI spec for details.
diff --git a/lib/efi_loader/efi_rng.c b/lib/efi_loader/efi_rng.c
index 9bad7ed6931..4734f95eee1 100644
--- a/lib/efi_loader/efi_rng.c
+++ b/lib/efi_loader/efi_rng.c
@@ -91,7 +91,7 @@ back:
 }
 
 /**
- * rng_getrng() - get random value
+ * getrng() - get random value
  *
  * This function implement the GetRng() service of the EFI random number
  * generator protocol. See the UEFI spec for details.
diff --git a/lib/efi_loader/efi_unicode_collation.c b/lib/efi_loader/efi_unicode_collation.c
index 627bb9123cf..d48700a352b 100644
--- a/lib/efi_loader/efi_unicode_collation.c
+++ b/lib/efi_loader/efi_unicode_collation.c
@@ -266,7 +266,7 @@ static void EFIAPI efi_fat_to_str(struct efi_unicode_collation_protocol *this,
 }
 
 /**
- * efi_fat_to_str() - convert a utf-16 string to legal characters for a FAT
+ * efi_str_to_fat() - convert a utf-16 string to legal characters for a FAT
  *                    file name in an OEM code page
  *
  * @this:	unicode collation protocol instance
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 5edc8dd2f9f..106bb406365 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -1232,7 +1232,7 @@ static void *fdt_find_separate(void)
 
 #ifdef CONFIG_SPL_BUILD
 	/* FDT is at end of BSS unless it is in a different memory region */
-	if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS))
+	if (CONFIG_IS_ENABLED(SEPARATE_BSS))
 		fdt_blob = (ulong *)_image_binary_end;
 	else
 		fdt_blob = (ulong *)__bss_end;
diff --git a/lib/tiny-printf.c b/lib/tiny-printf.c
index 9a70c6095b3..64dee779c4a 100644
--- a/lib/tiny-printf.c
+++ b/lib/tiny-printf.c
@@ -365,16 +365,15 @@ int sprintf(char *buf, const char *fmt, ...)
 {
 	struct printf_info info;
 	va_list va;
-	int ret;
 
 	va_start(va, fmt);
 	info.outstr = buf;
 	info.putc = putc_outstr;
-	ret = _vprintf(&info, fmt, va);
+	_vprintf(&info, fmt, va);
 	va_end(va);
 	*info.outstr = '\0';
 
-	return ret;
+	return info.outstr - buf;
 }
 
 #if CONFIG_IS_ENABLED(LOG)
@@ -382,14 +381,13 @@ int sprintf(char *buf, const char *fmt, ...)
 int vsnprintf(char *buf, size_t size, const char *fmt, va_list va)
 {
 	struct printf_info info;
-	int ret;
 
 	info.outstr = buf;
 	info.putc = putc_outstr;
-	ret = _vprintf(&info, fmt, va);
+	_vprintf(&info, fmt, va);
 	*info.outstr = '\0';
 
-	return ret;
+	return info.outstr - buf;
 }
 #endif
 
@@ -398,16 +396,15 @@ int snprintf(char *buf, size_t size, const char *fmt, ...)
 {
 	struct printf_info info;
 	va_list va;
-	int ret;
 
 	va_start(va, fmt);
 	info.outstr = buf;
 	info.putc = putc_outstr;
-	ret = _vprintf(&info, fmt, va);
+	_vprintf(&info, fmt, va);
 	va_end(va);
 	*info.outstr = '\0';
 
-	return ret;
+	return info.outstr - buf;
 }
 
 void print_grouped_ull(unsigned long long int_val, int digits)
diff --git a/net/tftp.c b/net/tftp.c
index b5d227d8bc2..d6744bc24e2 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -82,7 +82,6 @@ static ulong	tftp_block_wrap;
 static ulong	tftp_block_wrap_offset;
 static int	tftp_state;
 static ulong	tftp_load_addr;
-static ulong	tftp_load_size;
 #ifdef CONFIG_TFTP_TSIZE
 /* The file size reported by the server */
 static int	tftp_tsize;
@@ -159,13 +158,8 @@ static inline int store_block(int block, uchar *src, unsigned int len)
 	void *ptr;
 
 	if (CONFIG_IS_ENABLED(LMB)) {
-		ulong end_addr = tftp_load_addr + tftp_load_size;
-
-		if (!end_addr)
-			end_addr = ULONG_MAX;
-
 		if (store_addr < tftp_load_addr ||
-		    store_addr + len > end_addr) {
+		    lmb_read_check(store_addr, len)) {
 			puts("\nTFTP error: ");
 			puts("trying to overwrite reserved memory...\n");
 			return -1;
@@ -712,19 +706,8 @@ static void tftp_timeout_handler(void)
 	}
 }
 
-/* Initialize tftp_load_addr and tftp_load_size from image_load_addr and lmb */
 static int tftp_init_load_addr(void)
 {
-	if (CONFIG_IS_ENABLED(LMB)) {
-		phys_size_t max_size;
-
-		max_size = lmb_get_free_size(image_load_addr);
-		if (!max_size)
-			return -1;
-
-		tftp_load_size = max_size;
-	}
-
 	tftp_load_addr = image_load_addr;
 	return 0;
 }
diff --git a/net/wget.c b/net/wget.c
index 4a168641c65..b4251e0f293 100644
--- a/net/wget.c
+++ b/net/wget.c
@@ -8,6 +8,7 @@
 #include <command.h>
 #include <display_options.h>
 #include <env.h>
+#include <efi_loader.h>
 #include <image.h>
 #include <lmb.h>
 #include <mapmem.h>
@@ -64,26 +65,6 @@ static unsigned int retry_tcp_ack_num;	/* TCP retry acknowledge number*/
 static unsigned int retry_tcp_seq_num;	/* TCP retry sequence number */
 static int retry_len;			/* TCP retry length */
 
-static ulong wget_load_size;
-
-/**
- * wget_init_max_size() - initialize maximum load size
- *
- * Return:	0 if success, -1 if fails
- */
-static int wget_init_load_size(void)
-{
-	phys_size_t max_size;
-
-	max_size = lmb_get_free_size(image_load_addr);
-	if (!max_size)
-		return -1;
-
-	wget_load_size = max_size;
-
-	return 0;
-}
-
 /**
  * store_block() - store block in memory
  * @src: source of data
@@ -97,13 +78,8 @@ static inline int store_block(uchar *src, unsigned int offset, unsigned int len)
 	uchar *ptr;
 
 	if (CONFIG_IS_ENABLED(LMB)) {
-		ulong end_addr = image_load_addr + wget_load_size;
-
-		if (!end_addr)
-			end_addr = ULONG_MAX;
-
 		if (store_addr < image_load_addr ||
-		    store_addr + len > end_addr) {
+		    lmb_read_check(store_addr, len)) {
 			printf("\nwget error: ");
 			printf("trying to overwrite reserved memory...\n");
 			return -1;
@@ -196,13 +172,6 @@ void wget_fail(char *error_message, unsigned int tcp_seq_num,
 	wget_send(action, tcp_seq_num, tcp_ack_num, 0);
 }
 
-void wget_success(u8 action, unsigned int tcp_seq_num,
-		  unsigned int tcp_ack_num, int len, int packets)
-{
-	printf("Packets received %d, Transfer Successful\n", packets);
-	wget_send(action, tcp_seq_num, tcp_ack_num, len);
-}
-
 /*
  * Interfaces of U-BOOT
  */
@@ -432,6 +401,9 @@ static void wget_handler(uchar *pkt, u16 dport,
 	case WGET_TRANSFERRED:
 		printf("Packets received %d, Transfer Successful\n", packets);
 		net_set_state(wget_loop_state);
+		efi_set_bootdev("Net", "", image_url,
+				map_sysmem(image_load_addr, 0),
+				net_boot_file_size);
 		break;
 	}
 }
@@ -493,15 +465,6 @@ void wget_start(void)
 	debug_cond(DEBUG_WGET,
 		   "\nwget:Load address: 0x%lx\nLoading: *\b", image_load_addr);
 
-	if (CONFIG_IS_ENABLED(LMB)) {
-		if (wget_init_load_size()) {
-			printf("\nwget error: ");
-			printf("trying to overwrite reserved memory...\n");
-			net_set_state(NETLOOP_FAIL);
-			return;
-		}
-	}
-
 	net_set_timeout_handler(wget_timeout, wget_timeout_handler);
 	tcp_set_tcp_handler(wget_handler);
 
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 62e0207f91b..5daceb26061 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -32,6 +32,10 @@ baseprereq = $(basename $(notdir $<))
 escsq = $(subst $(squote),'\$(squote)',$1)
 
 ###
+# real prerequisites without phony targets
+real-prereqs = $(filter-out $(PHONY), $^)
+
+###
 # Easy method for doing a status message
        kecho := :
  quiet_kecho := echo
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 99cc29595b4..90aed148c44 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -293,6 +293,7 @@ $(obj)/%.o: $(src)/%.S FORCE
 
 targets += $(real-objs-y) $(real-objs-m) $(lib-y)
 targets += $(extra-y) $(MAKECMDGOALS) $(always)
+targets += $(real-dtb-y) $(lib-y) $(always-y)
 
 # Linker scripts preprocessor (.lds.S -> .lds)
 # ---------------------------------------------------------------------------
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 5dfb4b6e46f..54403040f00 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -47,6 +47,13 @@ obj-m		:= $(filter-out %/, $(obj-m))
 
 subdir-ym	:= $(sort $(subdir-y) $(subdir-m))
 
+# Expand $(foo-objs) $(foo-y) etc. by replacing their individuals
+suffix-search = $(strip $(foreach s, $3, $($(1:%$(strip $2)=%$s))))
+# List composite targets that are constructed by combining other targets
+multi-search = $(sort $(foreach m, $1, $(if $(call suffix-search, $m, $2, $3 -), $m)))
+# List primitive targets that are compiled from source files
+real-search = $(foreach m, $1, $(if $(call suffix-search, $m, $2, $3 -), $(call suffix-search, $m, $2, $3), $m))
+
 # if $(foo-objs) exists, foo.o is a composite object
 multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
 multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
@@ -58,6 +65,13 @@ single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
 multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
 multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
 
+# Composite DTB (i.e. DTB constructed by overlay)
+multi-dtb-y := $(call multi-search, $(dtb-y), .dtb, -dtbs)
+# Primitive DTB compiled from *.dts
+real-dtb-y := $(call real-search, $(dtb-y), .dtb, -dtbs)
+# Base DTB that overlay is applied onto (each first word of $(*-dtbs) expansion)
+base-dtb-y := $(foreach m, $(multi-dtb-y), $(firstword $(call suffix-search, $m, .dtb, -dtbs)))
+
 # $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
 # tell kbuild to descend
 subdir-obj-y := $(filter %/built-in.o, $(obj-y))
@@ -69,6 +83,7 @@ real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)
 # Add subdir path
 
 extra-y		:= $(addprefix $(obj)/,$(extra-y))
+always-y        := $(addprefix $(obj)/,$(always-y))
 always		:= $(addprefix $(obj)/,$(always))
 targets		:= $(addprefix $(obj)/,$(targets))
 modorder	:= $(addprefix $(obj)/,$(modorder))
@@ -83,6 +98,8 @@ multi-used-y	:= $(addprefix $(obj)/,$(multi-used-y))
 multi-used-m	:= $(addprefix $(obj)/,$(multi-used-m))
 multi-objs-y	:= $(addprefix $(obj)/,$(multi-objs-y))
 multi-objs-m	:= $(addprefix $(obj)/,$(multi-objs-m))
+multi-dtb-y	:= $(addprefix $(obj)/,$(multi-dtb-y))
+real-dtb-y      := $(addprefix $(obj)/,$(real-dtb-y))
 subdir-ym	:= $(addprefix $(obj)/,$(subdir-ym))
 
 # These flags are needed for modversions and compiling, so we define them here
@@ -301,6 +318,9 @@ endif
 
 DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
 
+# Set -@ if the target is a base DTB that overlay is applied onto
+DTC_FLAGS += $(if $(filter $(patsubst $(obj)/%,%,$@), $(base-dtb-y)), -@)
+
 # Generate an assembly file to wrap the output of the device tree compiler
 quiet_cmd_dt_S_dtb= DTBS    $@
 # Modified for U-Boot
@@ -422,6 +442,13 @@ cmd_dtco = mkdir -p $(dir ${dtc-tmp}) ; \
 $(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE
 	$(call if_changed_dep,dtco)
 
+quiet_cmd_fdtoverlay = DTOVL   $@
+           cmd_fdtoverlay = fdtoverlay -o $@ -i $(real-prereqs)
+
+$(multi-dtb-y): FORCE
+	$(call if_changed,fdtoverlay)
+$(call multi_depend, $(multi-dtb-y), .dtb, -dtbs)
+
 # Fonts
 # ---------------------------------------------------------------------------
 
diff --git a/test/dm/panel.c b/test/dm/panel.c
index ce835c96ed0..ec85a9b1e6e 100644
--- a/test/dm/panel.c
+++ b/test/dm/panel.c
@@ -33,7 +33,7 @@ static int dm_test_panel(struct unit_test_state *uts)
 	ut_assertok(sandbox_pwm_get_config(pwm, 0, &period_ns, &duty_ns,
 					   &enable, &polarity));
 	ut_asserteq(false, enable);
-	ut_asserteq(false, regulator_get_enable(reg));
+	ut_asserteq(true, regulator_get_enable(reg));
 
 	ut_assertok(panel_enable_backlight(dev));
 	ut_assertok(sandbox_pwm_get_config(pwm, 0, &period_ns, &duty_ns,
diff --git a/test/dm/regulator.c b/test/dm/regulator.c
index 532bbd82376..449748ad52f 100644
--- a/test/dm/regulator.c
+++ b/test/dm/regulator.c
@@ -186,7 +186,7 @@ int dm_test_power_regulator_set_enable_if_allowed(struct unit_test_state *uts)
 
 	/* Get BUCK1 - always on regulator */
 	platname = regulator_names[BUCK1][PLATNAME];
-	ut_assertok(regulator_autoset_by_name(platname, &dev_autoset));
+	ut_asserteq(-EALREADY, regulator_autoset_by_name(platname, &dev_autoset));
 	ut_assertok(regulator_get_by_platname(platname, &dev));
 
 	/* Try disabling always-on regulator */
@@ -288,7 +288,7 @@ static int dm_test_power_regulator_autoset(struct unit_test_state *uts)
 	 * Expected output state: uV=1200000; uA=200000; output enabled
 	 */
 	platname = regulator_names[BUCK1][PLATNAME];
-	ut_assertok(regulator_autoset_by_name(platname, &dev_autoset));
+	ut_asserteq(-EALREADY, regulator_autoset_by_name(platname, &dev_autoset));
 
 	/* Check, that the returned device is proper */
 	ut_assertok(regulator_get_by_platname(platname, &dev));
diff --git a/test/py/tests/test_bootstage.py b/test/py/tests/test_bootstage.py
index a9eb9f0b4a1..bd71a1af3a2 100644
--- a/test/py/tests/test_bootstage.py
+++ b/test/py/tests/test_bootstage.py
@@ -33,7 +33,7 @@ def test_bootstage_report(u_boot_console):
 @pytest.mark.buildconfigspec('bootstage')
 @pytest.mark.buildconfigspec('cmd_bootstage')
 @pytest.mark.buildconfigspec('bootstage_stash')
-def test_bootstage_stash(u_boot_console):
+def test_bootstage_stash_and_unstash(u_boot_console):
     f = u_boot_console.config.env.get('env__bootstage_cmd_file', None)
     if not f:
         pytest.skip('No bootstage environment file is defined')
@@ -55,13 +55,8 @@ def test_bootstage_stash(u_boot_console):
     # Check expected string in last column of output
     output_last_col = ''.join([i.split()[-1] for i in output.split('\n')])
     assert expected_text in output_last_col
-    return addr, size
 
-@pytest.mark.buildconfigspec('bootstage')
-@pytest.mark.buildconfigspec('cmd_bootstage')
-@pytest.mark.buildconfigspec('bootstage_stash')
-def test_bootstage_unstash(u_boot_console):
-    addr, size = test_bootstage_stash(u_boot_console)
+    # Check that unstash works as expected
     u_boot_console.run_command('bootstage unstash %x %x' % (addr, size))
     output = u_boot_console.run_command('echo $?')
     assert output.endswith('0')
diff --git a/test/py/tests/test_efi_loader.py b/test/py/tests/test_efi_loader.py
index 85473a9049b..5f3b448a066 100644
--- a/test/py/tests/test_efi_loader.py
+++ b/test/py/tests/test_efi_loader.py
@@ -45,11 +45,18 @@ env__efi_loader_helloworld_file = {
     'crc32': 'c2244b26',                   # CRC32 check sum
     'addr': 0x40400000,                    # load address
 }
+
+# False if the helloworld EFI over HTTP boot test should be performed.
+# If HTTP boot testing is not possible or desired, set this variable to True or
+# ommit it.
+env__efi_helloworld_net_http_test_skip = True
 """
 
 import pytest
 import u_boot_utils
 
+PROTO_TFTP, PROTO_HTTP = range(0, 2)
+
 net_set_up = False
 
 def test_efi_pre_commands(u_boot_console):
@@ -110,10 +117,10 @@ def test_efi_setup_static(u_boot_console):
     global net_set_up
     net_set_up = True
 
-def fetch_tftp_file(u_boot_console, env_conf):
-    """Grab an env described file via TFTP and return its address
+def fetch_file(u_boot_console, env_conf, proto):
+    """Grab an env described file via TFTP or HTTP and return its address
 
-    A file as described by an env config <env_conf> is downloaded from the TFTP
+    A file as described by an env config <env_conf> is downloaded from the
     server. The address to that file is returned.
     """
     if not net_set_up:
@@ -128,7 +135,13 @@ def fetch_tftp_file(u_boot_console, env_conf):
         addr = u_boot_utils.find_ram_base(u_boot_console)
 
     fn = f['fn']
-    output = u_boot_console.run_command('tftpboot %x %s' % (addr, fn))
+    if proto == PROTO_TFTP:
+        cmd = 'tftpboot'
+    elif proto == PROTO_HTTP:
+        cmd = 'wget'
+    else:
+        assert False
+    output = u_boot_console.run_command('%s %x %s' % (cmd, addr, fn))
     expected_text = 'Bytes transferred = '
     sz = f.get('size', None)
     if sz:
@@ -147,22 +160,40 @@ def fetch_tftp_file(u_boot_console, env_conf):
 
     return addr
 
+def do_test_efi_helloworld_net(u_boot_console, proto):
+    addr = fetch_file(u_boot_console, 'env__efi_loader_helloworld_file', proto)
+
+    output = u_boot_console.run_command('bootefi %x' % addr)
+    expected_text = 'Hello, world'
+    assert expected_text in output
+    expected_text = '## Application failed'
+    assert expected_text not in output
+
 @pytest.mark.buildconfigspec('of_control')
 @pytest.mark.buildconfigspec('cmd_bootefi_hello_compile')
-def test_efi_helloworld_net(u_boot_console):
+@pytest.mark.buildconfigspec('cmd_tftpboot')
+def test_efi_helloworld_net_tftp(u_boot_console):
     """Run the helloworld.efi binary via TFTP.
 
     The helloworld.efi file is downloaded from the TFTP server and is executed
     using the fallback device tree at $fdtcontroladdr.
     """
 
-    addr = fetch_tftp_file(u_boot_console, 'env__efi_loader_helloworld_file')
+    do_test_efi_helloworld_net(u_boot_console, PROTO_TFTP);
 
-    output = u_boot_console.run_command('bootefi %x' % addr)
-    expected_text = 'Hello, world'
-    assert expected_text in output
-    expected_text = '## Application failed'
-    assert expected_text not in output
+@pytest.mark.buildconfigspec('of_control')
+@pytest.mark.buildconfigspec('cmd_bootefi_hello_compile')
+@pytest.mark.buildconfigspec('cmd_wget')
+def test_efi_helloworld_net_http(u_boot_console):
+    """Run the helloworld.efi binary via HTTP.
+
+    The helloworld.efi file is downloaded from the HTTP server and is executed
+    using the fallback device tree at $fdtcontroladdr.
+    """
+    if u_boot_console.config.env.get('env__efi_helloworld_net_http_test_skip', True):
+        pytest.skip('helloworld.efi HTTP test is not enabled!')
+
+    do_test_efi_helloworld_net(u_boot_console, PROTO_HTTP);
 
 @pytest.mark.buildconfigspec('cmd_bootefi_hello')
 def test_efi_helloworld_builtin(u_boot_console):
@@ -178,6 +209,7 @@ def test_efi_helloworld_builtin(u_boot_console):
 
 @pytest.mark.buildconfigspec('of_control')
 @pytest.mark.buildconfigspec('cmd_bootefi')
+@pytest.mark.buildconfigspec('cmd_tftpboot')
 def test_efi_grub_net(u_boot_console):
     """Run the grub.efi binary via TFTP.
 
@@ -185,7 +217,7 @@ def test_efi_grub_net(u_boot_console):
     executed.
     """
 
-    addr = fetch_tftp_file(u_boot_console, 'env__efi_loader_grub_file')
+    addr = fetch_file(u_boot_console, 'env__efi_loader_grub_file', PROTO_TFTP)
 
     u_boot_console.run_command('bootefi %x' % addr, wait_for_prompt=False)
 
diff --git a/test/py/tests/test_net_boot.py b/test/py/tests/test_net_boot.py
index 63309fe82e1..d7d74356928 100644
--- a/test/py/tests/test_net_boot.py
+++ b/test/py/tests/test_net_boot.py
@@ -75,7 +75,7 @@ env__net_pxe_bootable_file = {
     'check_pattern': 'ERROR',
 }
 
-# False or omitted if a PXE boot test should be tested.
+# False if a PXE boot test should be tested.
 # If PXE boot testing is not possible or desired, set this variable to True.
 # For example: If pxe configuration file is not proper to boot
 env__pxe_boot_test_skip = False
diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst
index 0cafc36bdcb..f9a3a42183b 100644
--- a/tools/binman/binman.rst
+++ b/tools/binman/binman.rst
@@ -494,12 +494,18 @@ point into the image.
 For example, say SPL is at the start of the image and linked to start at address
 80108000. If U-Boot's image-pos is 0x8000 then binman will write an image-pos
 for U-Boot of 80110000 into the SPL binary, since it assumes the image is loaded
-to 80108000, with SPL at 80108000 and U-Boot at 80110000.
+to 80108000, with SPL at 80108000 and U-Boot at 80110000. In other words, the
+positions are calculated relative to the start address of the image to which
+they are being written.
 
 For x86 devices (with the end-at-4gb property) this base address is not added
 since it is assumed that images are XIP and the offsets already include the
 address.
 
+For non-x86 cases where the symbol is used as a flash offset, the symbols-base
+property can be set to that offset (e.g. 0), so that the unadjusted image-pos
+is written into the image.
+
 While U-Boot's symbol updating is handled automatically by the u-boot-spl
 entry type (and others), it is possible to use this feature with any blob. To
 do this, add a `write-symbols` (boolean) property to the node, set the ELF
@@ -741,6 +747,17 @@ insert-template:
     properties are brought into the target node. See Templates_ below for
     more information.
 
+symbols-base:
+    When writing symbols into a binary, the value of that symbol is assumed to
+    be relative to the base address of the binary. This allow the binary to be
+    loaded in memory at its base address, so that symbols point into the binary
+    correctly. In some cases the binary is in fact not yet in memory, but must
+    be read from storage. In this case there is no base address for the symbols.
+    This property can be set to 0 to indicate this. Other values for
+    symbols-base are allowed, but care must be taken that the code which uses
+    the symbol is aware of the base being used. If omitted, the binary's base
+    address is used.
+
 The attributes supported for images and sections are described below. Several
 are similar to those for entries.
 
diff --git a/tools/binman/btool/fdtgrep.py b/tools/binman/btool/fdtgrep.py
index da1f8c7bf4e..446b2f4144b 100644
--- a/tools/binman/btool/fdtgrep.py
+++ b/tools/binman/btool/fdtgrep.py
@@ -74,8 +74,7 @@ class Bintoolfdtgrep(bintool.Bintool):
                 (with only neceesary nodes and properties)
 
         Returns:
-            CommandResult: Resulting output from the bintool, or None if the
-                tool is not present
+            str or bytes: Resulting stdout from the bintool
         """
         if phase == 'tpl':
             tag = 'bootph-pre-sram'
diff --git a/tools/binman/elf.py b/tools/binman/elf.py
index a4694056391..c75f4478813 100644
--- a/tools/binman/elf.py
+++ b/tools/binman/elf.py
@@ -234,7 +234,7 @@ def GetSymbolOffset(elf_fname, sym_name, base_sym=None):
     return val - base
 
 def LookupAndWriteSymbols(elf_fname, entry, section, is_elf=False,
-                          base_sym=None):
+                          base_sym=None, base_addr=None):
     """Replace all symbols in an entry with their correct values
 
     The entry contents is updated so that values for referenced symbols will be
@@ -247,7 +247,10 @@ def LookupAndWriteSymbols(elf_fname, entry, section, is_elf=False,
             entry
         entry: Entry to process
         section: Section which can be used to lookup symbol values
-        base_sym: Base symbol marking the start of the image
+        base_sym: Base symbol marking the start of the image (__image_copy_start
+            by default)
+        base_addr (int): Base address to use for the entry being written. If
+            None then the value of base_sym is used
 
     Returns:
         int: Number of symbols written
@@ -277,7 +280,8 @@ def LookupAndWriteSymbols(elf_fname, entry, section, is_elf=False,
     if not base and not is_elf:
         tout.debug(f'LookupAndWriteSymbols: no base: elf_fname={elf_fname}, base_sym={base_sym}, is_elf={is_elf}')
         return 0
-    base_addr = 0 if is_elf else base.address
+    if base_addr is None:
+        base_addr = 0 if is_elf else base.address
     count = 0
     for name, sym in syms.items():
         if name.startswith('_binman'):
@@ -301,8 +305,8 @@ def LookupAndWriteSymbols(elf_fname, entry, section, is_elf=False,
                 value = BINMAN_SYM_MAGIC_VALUE
             else:
                 # Look up the symbol in our entry tables.
-                value = section.GetImage().LookupImageSymbol(name, sym.weak,
-                                                             msg, base_addr)
+                value = section.GetImage().GetImageSymbolValue(name, sym.weak,
+                                                               msg, base_addr)
             if value is None:
                 value = -1
                 pack_string = pack_string.lower()
diff --git a/tools/binman/elf_test.py b/tools/binman/elf_test.py
index b64134123c1..2f22639dffc 100644
--- a/tools/binman/elf_test.py
+++ b/tools/binman/elf_test.py
@@ -37,7 +37,7 @@ class FakeSection:
     """A fake Section object, used for testing
 
     This has the minimum feature set needed to support testing elf functions.
-    A LookupSymbol() function is provided which returns a fake value for amu
+    A GetSymbolValue() function is provided which returns a fake value for any
     symbol requested.
     """
     def __init__(self, sym_value=1):
@@ -46,7 +46,7 @@ class FakeSection:
     def GetPath(self):
         return 'section_path'
 
-    def LookupImageSymbol(self, name, weak, msg, base_addr):
+    def GetImageSymbolValue(self, name, weak, msg, base_addr):
         """Fake implementation which returns the same value for all symbols"""
         return self.sym_value
 
diff --git a/tools/binman/entries.rst b/tools/binman/entries.rst
index d82f7b89203..3006c5914d6 100644
--- a/tools/binman/entries.rst
+++ b/tools/binman/entries.rst
@@ -64,7 +64,7 @@ Properties / Entry arguments:
 
 This entry holds the run-time firmware, typically started by U-Boot SPL.
 See the U-Boot README for your architecture or board for how to use it. See
-https://github.com/ARM-software/arm-trusted-firmware for more information
+https://github.com/TrustedFirmware-A/trusted-firmware-a for more information
 about ATF.
 
 
@@ -197,7 +197,7 @@ source files that the tool examples:
 
 To run the tool::
 
-    $ tools/binman/fip_util.py  -s /path/to/arm-trusted-firmware
+    $ tools/binman/fip_util.py  -s /path/to/trusted-firmware-a
     Warning: UUID 'UUID_NON_TRUSTED_WORLD_KEY_CERT' is not mentioned in tbbr_config.c file
     Existing code in 'tools/binman/fip_util.py' is up-to-date
 
diff --git a/tools/binman/entry.py b/tools/binman/entry.py
index 6d2f3789940..68f8d62bba9 100644
--- a/tools/binman/entry.py
+++ b/tools/binman/entry.py
@@ -108,6 +108,9 @@ class Entry(object):
             not need to be done again. This is only used with 'binman replace',
             to stop sections from being rebuilt if their entries have not been
             replaced
+        symbols_base (int): Use this value as the assumed load address of the
+            target entry, when calculating the symbol value. If None, this is
+            0 for blobs and the image-start address for ELF files
     """
     fake_dir = None
 
@@ -159,6 +162,7 @@ class Entry(object):
         self.preserve = False
         self.build_done = False
         self.no_write_symbols = False
+        self.symbols_base = None
 
     @staticmethod
     def FindEntryClass(etype, expanded):
@@ -324,6 +328,7 @@ class Entry(object):
 
         self.preserve = fdt_util.GetBool(self._node, 'preserve')
         self.no_write_symbols = fdt_util.GetBool(self._node, 'no-write-symbols')
+        self.symbols_base = fdt_util.GetInt(self._node, 'symbols-base')
 
     def GetDefaultFilename(self):
         return None
@@ -576,8 +581,16 @@ class Entry(object):
     def GetEntryArgsOrProps(self, props, required=False):
         """Return the values of a set of properties
 
+        Looks up the named entryargs and returns the value for each. If any
+        required ones are missing, the error is reported to the user.
+
         Args:
-            props: List of EntryArg objects
+            props (list of EntryArg): List of entry arguments to look up
+            required (bool): True if these entry arguments are required
+
+        Returns:
+            list of values: one for each item in props, the type is determined
+                by the EntryArg's 'datatype' property (str or int)
 
         Raises:
             ValueError if a property is not found
@@ -698,14 +711,22 @@ class Entry(object):
     def WriteSymbols(self, section):
         """Write symbol values into binary files for access at run time
 
+        As a special case, if symbols_base is not specified and this is an
+        end-at-4gb image, a symbols_base of 0 is used
+
         Args:
           section: Section containing the entry
         """
         if self.auto_write_symbols and not self.no_write_symbols:
             # Check if we are writing symbols into an ELF file
             is_elf = self.GetDefaultFilename() == self.elf_fname
+
+            symbols_base = self.symbols_base
+            if symbols_base is None and self.GetImage()._end_4gb:
+                symbols_base = 0
+
             elf.LookupAndWriteSymbols(self.elf_fname, self, section.GetImage(),
-                                      is_elf, self.elf_base_sym)
+                                      is_elf, self.elf_base_sym, symbols_base)
 
     def CheckEntries(self):
         """Check that the entry offsets are correct
diff --git a/tools/binman/etype/atf_bl31.py b/tools/binman/etype/atf_bl31.py
index 2041da416c9..a137f8e0b39 100644
--- a/tools/binman/etype/atf_bl31.py
+++ b/tools/binman/etype/atf_bl31.py
@@ -16,7 +16,7 @@ class Entry_atf_bl31(Entry_blob_named_by_arg):
 
     This entry holds the run-time firmware, typically started by U-Boot SPL.
     See the U-Boot README for your architecture or board for how to use it. See
-    https://github.com/ARM-software/arm-trusted-firmware for more information
+    https://github.com/TrustedFirmware-A/trusted-firmware-a for more information
     about ATF.
     """
     def __init__(self, section, etype, node):
diff --git a/tools/binman/etype/atf_fip.py b/tools/binman/etype/atf_fip.py
index 3da0dfcfc12..636e073afc8 100644
--- a/tools/binman/etype/atf_fip.py
+++ b/tools/binman/etype/atf_fip.py
@@ -248,7 +248,7 @@ class Entry_atf_fip(Entry_section):
             fent = entry._fip_entry
             entry.size = fent.size
             entry.offset = fent.offset
-            entry.image_pos = self.image_pos + entry.offset
+            entry.SetImagePos(image_pos + self.offset)
 
     def ReadChildData(self, child, decomp=True, alt_format=None):
         if not self.reader:
diff --git a/tools/binman/etype/blob_phase.py b/tools/binman/etype/blob_phase.py
index 951d9934050..09bb89b3b78 100644
--- a/tools/binman/etype/blob_phase.py
+++ b/tools/binman/etype/blob_phase.py
@@ -57,3 +57,8 @@ class Entry_blob_phase(Entry_section):
         if self.no_write_symbols:
             for entry in self._entries.values():
                 entry.no_write_symbols = True
+
+        # Propagate the symbols-base property
+        if self.symbols_base is not None:
+            for entry in self._entries.values():
+                entry.symbols_base = self.symbols_base
diff --git a/tools/binman/etype/cbfs.py b/tools/binman/etype/cbfs.py
index 575aa624f6c..124fa1e4ffc 100644
--- a/tools/binman/etype/cbfs.py
+++ b/tools/binman/etype/cbfs.py
@@ -245,7 +245,7 @@ class Entry_cbfs(Entry):
             cfile = entry._cbfs_file
             entry.size = cfile.data_len
             entry.offset = cfile.calced_cbfs_offset
-            entry.image_pos = self.image_pos + entry.offset
+            entry.SetImagePos(image_pos + self.offset)
             if entry._cbfs_compress:
                 entry.uncomp_size = cfile.memlen
 
diff --git a/tools/binman/etype/efi_capsule.py b/tools/binman/etype/efi_capsule.py
index 768e006dc50..9f06cc88e6e 100644
--- a/tools/binman/etype/efi_capsule.py
+++ b/tools/binman/etype/efi_capsule.py
@@ -151,6 +151,8 @@ class Entry_efi_capsule(Entry_section):
             return tools.read_file(capsule_fname)
         else:
             # Bintool is missing; just use the input data as the output
+            if not self.GetAllowMissing():
+                self.Raise("Missing tool: 'mkeficapsule'")
             self.record_missing_bintool(self.mkeficapsule)
             return data
 
diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py
index ee44e5a1cd6..0abe1c78c43 100644
--- a/tools/binman/etype/fit.py
+++ b/tools/binman/etype/fit.py
@@ -6,9 +6,10 @@
 """Entry-type module for producing a FIT"""
 
 import glob
-import libfdt
 import os
 
+import libfdt
+
 from binman.entry import Entry, EntryArg
 from binman.etype.section import Entry_section
 from binman import elf
@@ -23,6 +24,7 @@ OPERATIONS = {
     'split-elf': OP_SPLIT_ELF,
     }
 
+# pylint: disable=invalid-name
 class Entry_fit(Entry_section):
 
     """Flat Image Tree (FIT)
@@ -94,7 +96,10 @@ class Entry_fit(Entry_section):
             can be provided as a directory. Each .dtb file in the directory is
             processed, , e.g.::
 
-                fit,fdt-list-dir = "arch/arm/dts
+                fit,fdt-list-dir = "arch/arm/dts";
+
+            In this case the input directories are ignored and all devicetree
+            files must be in that directory.
 
     Substitutions
     ~~~~~~~~~~~~~
@@ -381,31 +386,46 @@ class Entry_fit(Entry_section):
     def __init__(self, section, etype, node):
         """
         Members:
-            _fit: FIT file being built
-            _entries: dict from Entry_section:
+            _fit (str): FIT file being built
+            _fit_props (list of str): 'fit,...' properties found in the
+                top-level node
+            _fdts (list of str): Filenames of .dtb files to process
+            _fdt_dir (str): Directory to scan to find .dtb files, or None
+            _fit_list_prop (str): Name of the EntryArg containing a list of .dtb
+                files
+            _fit_default_dt (str): Name of the EntryArg containing the default
+                .dtb file
+            _entries (dict of entries): from Entry_section:
                 key: relative path to entry Node (from the base of the FIT)
                 value: Entry_section object comprising the contents of this
                     node
-            _priv_entries: Internal copy of _entries which includes 'generator'
-                entries which are used to create the FIT, but should not be
-                processed as real entries. This is set up once we have the
-                entries
-            _loadables: List of generated split-elf nodes, each a node name
+            _priv_entries (dict of entries): Internal copy of _entries which
+                includes 'generator' entries which are used to create the FIT,
+                but should not be processed as real entries. This is set up once
+                we have the entries
+            _loadables (list of str): List of generated split-elf nodes, each
+                a node name
+            _remove_props (list of str): Value of of-spl-remove-props EntryArg,
+                the list of properties to remove with fdtgrep
+            mkimage (Bintool): mkimage tool
+            fdtgrep (Bintool): fdtgrep tool
         """
         super().__init__(section, etype, node)
         self._fit = None
         self._fit_props = {}
         self._fdts = None
         self._fdt_dir = None
-        self.mkimage = None
-        self.fdtgrep = None
+        self._fit_list_prop = None
+        self._fit_default_dt = None
         self._priv_entries = {}
         self._loadables = []
         self._remove_props = []
-        props, = self.GetEntryArgsOrProps(
-            [EntryArg('of-spl-remove-props', str)], required=False)
+        props = self.GetEntryArgsOrProps(
+            [EntryArg('of-spl-remove-props', str)], required=False)[0]
         if props:
             self._remove_props = props.split()
+        self.mkimage = None
+        self.fdtgrep = None
 
     def ReadNode(self):
         super().ReadNode()
@@ -414,8 +434,8 @@ class Entry_fit(Entry_section):
                 self._fit_props[pname] = prop
         self._fit_list_prop = self._fit_props.get('fit,fdt-list')
         if self._fit_list_prop:
-            fdts, = self.GetEntryArgsOrProps(
-                [EntryArg(self._fit_list_prop.value, str)])
+            fdts = self.GetEntryArgsOrProps(
+                [EntryArg(self._fit_list_prop.value, str)])[0]
             if fdts is not None:
                 self._fdts = fdts.split()
         else:
@@ -431,7 +451,7 @@ class Entry_fit(Entry_section):
         self._fit_default_dt = self.GetEntryArgsOrProps([EntryArg('default-dt',
                                                                   str)])[0]
 
-    def _get_operation(self, base_node, node):
+    def _get_operation(self, node):
         """Get the operation referenced by a subnode
 
         Args:
@@ -550,6 +570,9 @@ class Entry_fit(Entry_section):
             phase (str): Phase to generate for ('tpl', 'vpl', 'spl')
             outfile (str): Output filename to write the grepped FDT contents to
                 (with only neceesary nodes and properties)
+
+        Returns:
+            str or bytes: Resulting stdout from fdtgrep
         """
         return self.fdtgrep.create_for_phase(infile, phase, outfile,
                                              self._remove_props)
@@ -557,9 +580,6 @@ class Entry_fit(Entry_section):
     def _build_input(self):
         """Finish the FIT by adding the 'data' properties to it
 
-        Arguments:
-            fdt: FIT to update
-
         Returns:
             bytes: New fdt contents
         """
@@ -580,13 +600,17 @@ class Entry_fit(Entry_section):
                 if val.startswith('@'):
                     if not self._fdts:
                         return
-                    if not self._fit_default_dt:
+                    default_dt = self._fit_default_dt
+                    if not default_dt:
                         self.Raise("Generated 'default' node requires default-dt entry argument")
-                    if self._fit_default_dt not in self._fdts:
-                        self.Raise(
-                            f"default-dt entry argument '{self._fit_default_dt}' "
-                            f"not found in fdt list: {', '.join(self._fdts)}")
-                    seq = self._fdts.index(self._fit_default_dt)
+                    if default_dt not in self._fdts:
+                        if self._fdt_dir:
+                            default_dt = os.path.basename(default_dt)
+                        if default_dt not in self._fdts:
+                            self.Raise(
+                                f"default-dt entry argument '{self._fit_default_dt}' "
+                                f"not found in fdt list: {', '.join(self._fdts)}")
+                    seq = self._fdts.index(default_dt)
                     val = val[1:].replace('DEFAULT-SEQ', str(seq + 1))
                     fsw.property_string(pname, val)
                     return
@@ -634,7 +658,7 @@ class Entry_fit(Entry_section):
                     result.append(name)
             return firmware, result
 
-        def _gen_fdt_nodes(base_node, node, depth, in_images):
+        def _gen_fdt_nodes(node, depth, in_images):
             """Generate FDT nodes
 
             This creates one node for each member of self._fdts using the
@@ -654,7 +678,10 @@ class Entry_fit(Entry_section):
                 # Generate nodes for each FDT
                 for seq, fdt_fname in enumerate(self._fdts):
                     node_name = node.name[1:].replace('SEQ', str(seq + 1))
-                    fname = tools.get_input_filename(fdt_fname + '.dtb')
+                    if self._fdt_dir:
+                        fname = os.path.join(self._fdt_dir, fdt_fname + '.dtb')
+                    else:
+                        fname = tools.get_input_filename(fdt_fname + '.dtb')
                     fdt_phase = None
                     with fsw.add_node(node_name):
                         for pname, prop in node.props.items():
@@ -688,8 +715,9 @@ class Entry_fit(Entry_section):
                         # Add data for 'images' nodes (but not 'config')
                         if depth == 1 and in_images:
                             if fdt_phase:
+                                leaf = os.path.basename(fdt_fname)
                                 phase_fname = tools.get_output_filename(
-                                    f'{fdt_fname}-{fdt_phase}.dtb')
+                                    f'{leaf}-{fdt_phase}.dtb')
                                 self._run_fdtgrep(fname, fdt_phase, phase_fname)
                                 data = tools.read_file(phase_fname)
                             else:
@@ -707,11 +735,10 @@ class Entry_fit(Entry_section):
                     else:
                         self.Raise("Generator node requires 'fit,fdt-list' property")
 
-        def _gen_split_elf(base_node, node, depth, segments, entry_addr):
+        def _gen_split_elf(node, depth, segments, entry_addr):
             """Add nodes for the ELF file, one per group of contiguous segments
 
             Args:
-                base_node (Node): Template node from the binman definition
                 node (Node): Node to replace (in the FIT being built)
                 depth: Current node depth (0 is the base 'fit' node)
                 segments (list): list of segments, each:
@@ -742,7 +769,7 @@ class Entry_fit(Entry_section):
                         with fsw.add_node(subnode.name):
                             _add_node(node, depth + 1, subnode)
 
-        def _gen_node(base_node, node, depth, in_images, entry):
+        def _gen_node(node, depth, in_images, entry):
             """Generate nodes from a template
 
             This creates one or more nodes depending on the fit,operation being
@@ -758,8 +785,6 @@ class Entry_fit(Entry_section):
             If the file is missing, nothing is generated.
 
             Args:
-                base_node (Node): Base Node of the FIT (with 'description'
-                    property)
                 node (Node): Generator node to process
                 depth (int): Current node depth (0 is the base 'fit' node)
                 in_images (bool): True if this is inside the 'images' node, so
@@ -767,13 +792,12 @@ class Entry_fit(Entry_section):
                 entry (entry_Section): Entry for the section containing the
                     contents of this node
             """
-            oper = self._get_operation(base_node, node)
+            oper = self._get_operation(node)
             if oper == OP_GEN_FDT_NODES:
-                _gen_fdt_nodes(base_node, node, depth, in_images)
+                _gen_fdt_nodes(node, depth, in_images)
             elif oper == OP_SPLIT_ELF:
                 # Entry_section.ObtainContents() either returns True or
                 # raises an exception.
-                data = None
                 missing_opt_list = []
                 entry.ObtainContents()
                 entry.Pack(0)
@@ -795,7 +819,7 @@ class Entry_fit(Entry_section):
                             self._raise_subnode(
                                 node, f'Failed to read ELF file: {str(exc)}')
 
-                    _gen_split_elf(base_node, node, depth, segments, entry_addr)
+                    _gen_split_elf(node, depth, segments, entry_addr)
 
         def _add_node(base_node, depth, node):
             """Add nodes to the output FIT
@@ -826,7 +850,6 @@ class Entry_fit(Entry_section):
                 fsw.property('data', bytes(data))
 
             for subnode in node.subnodes:
-                subnode_path = f'{rel_path}/{subnode.name}'
                 if has_images and not self.IsSpecialSubnode(subnode):
                     # This subnode is a content node not meant to appear in
                     # the FIT (e.g. "/images/kernel/u-boot"), so don't call
@@ -834,7 +857,7 @@ class Entry_fit(Entry_section):
                     pass
                 elif self.GetImage().generate and subnode.name.startswith('@'):
                     entry = self._priv_entries.get(subnode.name)
-                    _gen_node(base_node, subnode, depth, in_images, entry)
+                    _gen_node(subnode, depth, in_images, entry)
                     # This is a generator (template) entry, so remove it from
                     # the list of entries used by PackEntries(), etc. Otherwise
                     # it will appear in the binman output
@@ -876,7 +899,10 @@ class Entry_fit(Entry_section):
         """
         if self.build_done:
             return
-        super().SetImagePos(image_pos)
+
+        # Skip the section processing, since we do that below. Just call the
+        # entry method
+        Entry.SetImagePos(self, image_pos)
 
         # If mkimage is missing we'll have empty data,
         # which will cause a FDT_ERR_BADMAGIC error
@@ -886,7 +912,7 @@ class Entry_fit(Entry_section):
         fdt = Fdt.FromData(self.GetData())
         fdt.Scan()
 
-        for image_name, section in self._entries.items():
+        for image_name, entry in self._entries.items():
             path = f"/images/{image_name}"
             node = fdt.GetNode(path)
 
@@ -914,10 +940,12 @@ class Entry_fit(Entry_section):
 
             # This should never happen
             else: # pragma: no cover
+                offset = None
+                size = None
                 self.Raise(f'{path}: missing data properties')
 
-            section.SetOffsetSize(offset, size)
-            section.SetImagePos(self.image_pos)
+            entry.SetOffsetSize(offset, size)
+            entry.SetImagePos(image_pos + self.offset)
 
     def AddBintools(self, btools):
         super().AddBintools(btools)
@@ -947,7 +975,7 @@ class Entry_fit(Entry_section):
         if input_fname:
             fname = input_fname
         else:
-            fname = tools.get_output_filename('%s.fit' % uniq)
+            fname = tools.get_output_filename(f'{uniq}.fit')
             tools.write_file(fname, self.GetData())
         args.append(fname)
 
diff --git a/tools/binman/etype/nxp_imx8mimage.py b/tools/binman/etype/nxp_imx8mimage.py
index 3585120b79b..8ad177b3b65 100644
--- a/tools/binman/etype/nxp_imx8mimage.py
+++ b/tools/binman/etype/nxp_imx8mimage.py
@@ -27,7 +27,8 @@ class Entry_nxp_imx8mimage(Entry_mkimage):
 
     def __init__(self, section, etype, node):
         super().__init__(section, etype, node)
-        self.required_props = ['nxp,boot-from', 'nxp,rom-version', 'nxp,loader-address']
+        self.required_props = ['nxp,boot-from', 'nxp,rom-version',
+                               'nxp,loader-address']
 
     def ReadNode(self):
         super().ReadNode()
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index 30c1041c7e8..f4f48c00e87 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -563,13 +563,13 @@ class Entry_section(Entry):
         return entry.GetData(required)
 
     def LookupEntry(self, entries, sym_name, msg):
-        """Look up the entry for an ENF  symbol
+        """Look up the entry for a binman symbol
 
         Args:
             entries (dict): entries to search:
                 key: entry name
                 value: Entry object
-            sym_name: Symbol name in the ELF file to look up in the format
+            sym_name: Symbol name to look up in the format
                 _binman_<entry>_prop_<property> where <entry> is the name of
                 the entry and <property> is the property to find (e.g.
                 _binman_u_boot_prop_offset). As a special case, you can append
@@ -606,11 +606,10 @@ class Entry_section(Entry):
                             entry = entries[name]
         return entry, entry_name, prop_name
 
-    def LookupSymbol(self, sym_name, optional, msg, base_addr, entries=None):
-        """Look up a symbol in an ELF file
+    def GetSymbolValue(self, sym_name, optional, msg, base_addr, entries=None):
+        """Get the value of a Binman symbol
 
-        Looks up a symbol in an ELF file. Only entry types which come from an
-        ELF image can be used by this function.
+        Look up a Binman symbol and obtain its value.
 
         At present the only entry properties supported are:
             offset
@@ -618,7 +617,7 @@ class Entry_section(Entry):
             size
 
         Args:
-            sym_name: Symbol name in the ELF file to look up in the format
+            sym_name: Symbol name to look up in the format
                 _binman_<entry>_prop_<property> where <entry> is the name of
                 the entry and <property> is the property to find (e.g.
                 _binman_u_boot_prop_offset). As a special case, you can append
@@ -628,12 +627,10 @@ class Entry_section(Entry):
             optional: True if the symbol is optional. If False this function
                 will raise if the symbol is not found
             msg: Message to display if an error occurs
-            base_addr: Base address of image. This is added to the returned
-                image_pos in most cases so that the returned position indicates
-                where the targetted entry/binary has actually been loaded. But
-                if end-at-4gb is used, this is not done, since the binary is
-                already assumed to be linked to the ROM position and using
-                execute-in-place (XIP).
+            base_addr (int): Base address of image. This is added to the
+                returned value of image-pos so that the returned position
+                indicates where the targeted entry/binary has actually been
+                loaded
 
         Returns:
             Value that should be assigned to that symbol, or None if it was
@@ -656,10 +653,10 @@ class Entry_section(Entry):
         if prop_name == 'offset':
             return entry.offset
         elif prop_name == 'image_pos':
-            value = entry.image_pos
-            if not self.GetImage()._end_4gb:
-                value += base_addr
-            return value
+            if not entry.image_pos:
+                tout.info(f'Symbol-writing: no value for {entry._node.path}')
+                return None
+            return base_addr + entry.image_pos
         if prop_name == 'size':
             return entry.size
         else:
diff --git a/tools/binman/fip_util.py b/tools/binman/fip_util.py
index b5caab2d37a..9d2eec82a0a 100755
--- a/tools/binman/fip_util.py
+++ b/tools/binman/fip_util.py
@@ -17,7 +17,7 @@ If ATF updates, run this program to update the FIT_TYPE_LIST.
 
 ARM Trusted Firmware is available at:
 
-https://github.com/ARM-software/arm-trusted-firmware.git
+https://github.com/TrustedFirmware-A/trusted-firmware-a.git
 """
 
 from argparse import ArgumentParser
@@ -427,7 +427,7 @@ def parse_macros(srcdir):
     """parse_macros: Parse the firmware_image_package.h file
 
     Args:
-        srcdir (str): 'arm-trusted-firmware' source directory
+        srcdir (str): 'trusted-firmware-a' source directory
 
     Returns:
         dict:
@@ -472,7 +472,7 @@ def parse_names(srcdir):
     """parse_names: Parse the tbbr_config.c file
 
     Args:
-        srcdir (str): 'arm-trusted-firmware' source directory
+        srcdir (str): 'trusted-firmware-a' source directory
 
     Returns:
         tuple: dict of entries:
@@ -559,8 +559,8 @@ def parse_atf_source(srcdir, dstfile, oldfile):
     """parse_atf_source(): Parse the ATF source tree and update this file
 
     Args:
-        srcdir (str): Path to 'arm-trusted-firmware' directory. Get this from:
-            https://github.com/ARM-software/arm-trusted-firmware.git
+        srcdir (str): Path to 'trusted-firmware-a' directory. Get this from:
+            https://github.com/TrustedFirmware-A/trusted-firmware-a.git
         dstfile (str): File to write new code to, if an update is needed
         oldfile (str): Python source file to compare against
 
@@ -573,7 +573,7 @@ def parse_atf_source(srcdir, dstfile, oldfile):
     if not os.path.exists(readme_fname):
         raise ValueError(
             f"Expected file '{readme_fname}' - try using -s to specify the "
-            'arm-trusted-firmware directory')
+            'trusted-firmware-a directory')
     readme = tools.read_file(readme_fname, binary=False)
     first_line = 'Trusted Firmware-A'
     if readme.splitlines()[0] != first_line:
@@ -603,7 +603,7 @@ def main(argv, oldfile):
         int: 0 (exit code)
     """
     parser = ArgumentParser(epilog='''Creates an updated version of this code,
-with a table of FIP-entry types parsed from the arm-trusted-firmware source
+with a table of FIP-entry types parsed from the trusted-firmware-a source
 directory''')
     parser.add_argument(
         '-D', '--debug', action='store_true',
@@ -613,7 +613,7 @@ directory''')
         help='Output file to write new fip_util.py file to')
     parser.add_argument(
         '-s', '--src', type=str, default='.',
-        help='Directory containing the arm-trusted-firmware source')
+        help='Directory containing the trusted-firmware-a source')
     args = parser.parse_args(argv)
 
     if not args.debug:
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 2577c0016c0..e3f231e4bcc 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -403,8 +403,10 @@ class TestFunctional(unittest.TestCase):
             test_section_timeout: True to force the first time to timeout, as
                 used in testThreadTimeout()
             update_fdt_in_elf: Value to pass with --update-fdt-in-elf=xxx
-            force_missing_tools (str): comma-separated list of bintools to
+            force_missing_bintools (str): comma-separated list of bintools to
                 regard as missing
+            ignore_missing (bool): True to return success even if there are
+                missing blobs or bintools
             output_dir: Specific output directory to use for image using -O
 
         Returns:
@@ -503,8 +505,9 @@ class TestFunctional(unittest.TestCase):
         return dtb.GetContents()
 
     def _DoReadFileDtb(self, fname, use_real_dtb=False, use_expanded=False,
-                       map=False, update_dtb=False, entry_args=None,
-                       reset_dtbs=True, extra_indirs=None, threads=None):
+                       verbosity=None, map=False, update_dtb=False,
+                       entry_args=None, reset_dtbs=True, extra_indirs=None,
+                       threads=None):
         """Run binman and return the resulting image
 
         This runs binman with a given test file and then reads the resulting
@@ -521,6 +524,7 @@ class TestFunctional(unittest.TestCase):
                 But in some test we need the real contents.
             use_expanded: True to use expanded entries where available, e.g.
                 'u-boot-expanded' instead of 'u-boot'
+            verbosity: Verbosity level to use (0-3, None=don't set it)
             map: True to output map files for the images
             update_dtb: Update the offset and size of each entry in the device
                 tree before packing it into the image
@@ -557,7 +561,8 @@ class TestFunctional(unittest.TestCase):
         try:
             retcode = self._DoTestFile(fname, map=map, update_dtb=update_dtb,
                     entry_args=entry_args, use_real_dtb=use_real_dtb,
-                    use_expanded=use_expanded, extra_indirs=extra_indirs,
+                    use_expanded=use_expanded, verbosity=verbosity,
+                    extra_indirs=extra_indirs,
                     threads=threads)
             self.assertEqual(0, retcode)
             out_dtb_fname = tools.get_output_filename('u-boot.dtb.out')
@@ -1498,18 +1503,22 @@ class TestFunctional(unittest.TestCase):
         self.assertEqual(U_BOOT_SPL_NODTB_DATA, data[:len(U_BOOT_SPL_NODTB_DATA)])
 
     def checkSymbols(self, dts, base_data, u_boot_offset, entry_args=None,
-                     use_expanded=False, no_write_symbols=False):
+                     use_expanded=False, no_write_symbols=False,
+                     symbols_base=None):
         """Check the image contains the expected symbol values
 
         Args:
             dts: Device tree file to use for test
             base_data: Data before and after 'u-boot' section
-            u_boot_offset: Offset of 'u-boot' section in image
+            u_boot_offset (int): Offset of 'u-boot' section in image, or None if
+                the offset not available due to it being in a compressed section
             entry_args: Dict of entry args to supply to binman
                 key: arg name
                 value: value of that arg
             use_expanded: True to use expanded entries where available, e.g.
                 'u-boot-expanded' instead of 'u-boot'
+            symbols_base (int): Value to expect for symbols-base in u-boot-spl,
+                None if none
         """
         elf_fname = self.ElfTestFile('u_boot_binman_syms')
         syms = elf.GetSymbols(elf_fname, ['binman', 'image'])
@@ -1520,22 +1529,64 @@ class TestFunctional(unittest.TestCase):
 
         self._SetupSplElf('u_boot_binman_syms')
         data = self._DoReadFileDtb(dts, entry_args=entry_args,
-                                   use_expanded=use_expanded)[0]
+                                   use_expanded=use_expanded,
+                                   verbosity=None if u_boot_offset else 3)[0]
+
+        # The lz4-compressed version of the U-Boot data is 19 bytes long
+        comp_uboot_len = 19
+
         # The image should contain the symbols from u_boot_binman_syms.c
         # Note that image_pos is adjusted by the base address of the image,
         # which is 0x10 in our test image
-        sym_values = struct.pack('<LLQLL', elf.BINMAN_SYM_MAGIC_VALUE,
-                                 0x00, u_boot_offset + len(U_BOOT_DATA),
-                                 0x10 + u_boot_offset, 0x04)
+        # If u_boot_offset is None, Binman should write -1U into the image
+        vals2 = (elf.BINMAN_SYM_MAGIC_VALUE, 0x00,
+                u_boot_offset + len(U_BOOT_DATA) if u_boot_offset else
+                    len(U_BOOT_SPL_DATA) + 1 + comp_uboot_len,
+                0x10 + u_boot_offset if u_boot_offset else 0xffffffff, 0x04)
+
+        # u-boot-spl has a symbols-base property, so take that into account if
+        # required. The caller must supply the value
+        vals = list(vals2)
+        if symbols_base is not None:
+            vals[3] = symbols_base + u_boot_offset
+        vals = tuple(vals)
+
+        sym_values = struct.pack('<LLQLL', *vals)
+        sym_values2 = struct.pack('<LLQLL', *vals2)
         if no_write_symbols:
-            expected = (base_data +
-                        tools.get_bytes(0xff, 0x38 - len(base_data)) +
-                        U_BOOT_DATA + base_data)
+            self.assertEqual(
+                base_data +
+                tools.get_bytes(0xff, 0x38 - len(base_data)) +
+                U_BOOT_DATA + base_data, data)
         else:
-            expected = (sym_values + base_data[24:] +
-                        tools.get_bytes(0xff, 1) + U_BOOT_DATA + sym_values +
-                        base_data[24:])
-        self.assertEqual(expected, data)
+            got_vals = struct.unpack('<LLQLL', data[:24])
+
+            # For debugging:
+            #print('expect:', list(f'{v:x}' for v in vals))
+            #print('   got:', list(f'{v:x}' for v in got_vals))
+
+            self.assertEqual(vals, got_vals)
+            self.assertEqual(sym_values, data[:24])
+
+            blen = len(base_data)
+            self.assertEqual(base_data[24:], data[24:blen])
+            self.assertEqual(0xff, data[blen])
+
+            if u_boot_offset:
+                ofs = blen + 1 + len(U_BOOT_DATA)
+                self.assertEqual(U_BOOT_DATA, data[blen + 1:ofs])
+            else:
+                ofs = blen + 1 + comp_uboot_len
+
+            self.assertEqual(sym_values2, data[ofs:ofs + 24])
+            self.assertEqual(base_data[24:], data[ofs + 24:])
+
+            # Just repeating the above asserts all at once, for clarity
+            if u_boot_offset:
+                expected = (sym_values + base_data[24:] +
+                            tools.get_bytes(0xff, 1) + U_BOOT_DATA +
+                            sym_values2 + base_data[24:])
+                self.assertEqual(expected, data)
 
     def testSymbols(self):
         """Test binman can assign symbols embedded in U-Boot"""
@@ -4181,7 +4232,8 @@ class TestFunctional(unittest.TestCase):
         data = self._DoReadFile('172_scp.dts')
         self.assertEqual(SCP_DATA, data[:len(SCP_DATA)])
 
-    def CheckFitFdt(self, dts='170_fit_fdt.dts', use_fdt_list=True):
+    def CheckFitFdt(self, dts='170_fit_fdt.dts', use_fdt_list=True,
+                    default_dt=None):
         """Check an image with an FIT with multiple FDT images"""
         def _CheckFdt(seq, expected_data):
             """Check the FDT nodes
@@ -4225,6 +4277,8 @@ class TestFunctional(unittest.TestCase):
         }
         if use_fdt_list:
             entry_args['of-list'] = 'test-fdt1 test-fdt2'
+        if default_dt:
+            entry_args['default-dt'] = default_dt
         data = self._DoReadFileDtb(
             dts,
             entry_args=entry_args,
@@ -7624,7 +7678,22 @@ fdt         fdtmap                Extract the devicetree blob from the fdtmap
 
     def testFitFdtListDir(self):
         """Test an image with an FIT with FDT images using fit,fdt-list-dir"""
-        self.CheckFitFdt('333_fit_fdt_dir.dts', False)
+        old_dir = os.getcwd()
+        try:
+            os.chdir(self._indir)
+            self.CheckFitFdt('333_fit_fdt_dir.dts', False)
+        finally:
+            os.chdir(old_dir)
+
+    def testFitFdtListDirDefault(self):
+        """Test an FIT fit,fdt-list-dir where the default DT in is a subdir"""
+        old_dir = os.getcwd()
+        try:
+            os.chdir(self._indir)
+            self.CheckFitFdt('333_fit_fdt_dir.dts', False,
+                             default_dt='rockchip/test-fdt2')
+        finally:
+            os.chdir(old_dir)
 
     def testFitFdtCompat(self):
         """Test an image with an FIT with compatible in the config nodes"""
@@ -7690,6 +7759,51 @@ fdt         fdtmap                Extract the devicetree blob from the fdtmap
             # Make sure the other node is gone
             self.assertIsNone(dtb.GetNode('/node/other-node'))
 
+    def testMkeficapsuleMissing(self):
+        """Test that binman complains if mkeficapsule is missing"""
+        with self.assertRaises(ValueError) as e:
+            self._DoTestFile('311_capsule.dts',
+                             force_missing_bintools='mkeficapsule')
+        self.assertIn("Node '/binman/efi-capsule': Missing tool: 'mkeficapsule'",
+                      str(e.exception))
+
+    def testMkeficapsuleMissingOk(self):
+        """Test that binman deals with mkeficapsule being missing"""
+        with test_util.capture_sys_output() as (stdout, stderr):
+            ret = self._DoTestFile('311_capsule.dts',
+                                   force_missing_bintools='mkeficapsule',
+                                   allow_missing=True)
+        self.assertEqual(103, ret)
+        err = stderr.getvalue()
+        self.assertRegex(err, "Image 'image'.*missing bintools.*: mkeficapsule")
+
+    def testSymbolsBase(self):
+        """Test handling of symbols-base"""
+        self.checkSymbols('336_symbols_base.dts', U_BOOT_SPL_DATA, 0x1c,
+                          symbols_base=0)
+
+    def testSymbolsBaseExpanded(self):
+        """Test handling of symbols-base with expanded entries"""
+        entry_args = {
+            'spl-dtb': '1',
+        }
+        self.checkSymbols('337_symbols_base_expand.dts', U_BOOT_SPL_NODTB_DATA +
+                          U_BOOT_SPL_DTB_DATA, 0x38,
+                          entry_args=entry_args, use_expanded=True,
+                          symbols_base=0)
+
+    def testSymbolsCompressed(self):
+        """Test binman complains about symbols from a compressed section"""
+        with test_util.capture_sys_output() as (stdout, stderr):
+            self.checkSymbols('338_symbols_comp.dts', U_BOOT_SPL_DATA, None)
+        out = stdout.getvalue()
+        self.assertIn('Symbol-writing: no value for /binman/section/u-boot',
+                      out)
+
+    def testNxpImx8Image(self):
+        """Test that binman can produce an iMX8 image"""
+        self._DoTestFile('339_nxp_imx8.dts')
+
 
 if __name__ == "__main__":
     unittest.main()
diff --git a/tools/binman/image.py b/tools/binman/image.py
index 702c9055585..24ce0af7c72 100644
--- a/tools/binman/image.py
+++ b/tools/binman/image.py
@@ -381,11 +381,10 @@ class Image(section.Entry_section):
             selected_entries.append(entry)
         return selected_entries, lines, widths
 
-    def LookupImageSymbol(self, sym_name, optional, msg, base_addr):
-        """Look up a symbol in an ELF file
+    def GetImageSymbolValue(self, sym_name, optional, msg, base_addr):
+        """Get the value of a Binman symbol
 
-        Looks up a symbol in an ELF file. Only entry types which come from an
-        ELF image can be used by this function.
+        Look up a Binman symbol and obtain its value.
 
         This searches through this image including all of its subsections.
 
@@ -405,12 +404,10 @@ class Image(section.Entry_section):
             optional: True if the symbol is optional. If False this function
                 will raise if the symbol is not found
             msg: Message to display if an error occurs
-            base_addr: Base address of image. This is added to the returned
-                image_pos in most cases so that the returned position indicates
-                where the targeted entry/binary has actually been loaded. But
-                if end-at-4gb is used, this is not done, since the binary is
-                already assumed to be linked to the ROM position and using
-                execute-in-place (XIP).
+            base_addr (int): Base address of image. This is added to the
+                returned value of image-pos so that the returned position
+                indicates where the targeted entry/binary has actually been
+                loaded
 
         Returns:
             Value that should be assigned to that symbol, or None if it was
@@ -423,8 +420,8 @@ class Image(section.Entry_section):
         entries = OrderedDict()
         entries_by_name = {}
         self._CollectEntries(entries, entries_by_name, self)
-        return self.LookupSymbol(sym_name, optional, msg, base_addr,
-                                 entries_by_name)
+        return self.GetSymbolValue(sym_name, optional, msg, base_addr,
+                                   entries_by_name)
 
     def CollectBintools(self):
         """Collect all the bintools used by this image
diff --git a/tools/binman/image_test.py b/tools/binman/image_test.py
index bd51c1e55d1..7d65e2d589a 100644
--- a/tools/binman/image_test.py
+++ b/tools/binman/image_test.py
@@ -13,7 +13,7 @@ class TestImage(unittest.TestCase):
     def testInvalidFormat(self):
         image = Image('name', 'node', test=True)
         with self.assertRaises(ValueError) as e:
-            image.LookupSymbol('_binman_something_prop_', False, 'msg', 0)
+            image.GetSymbolValue('_binman_something_prop_', False, 'msg', 0)
         self.assertIn(
             "msg: Symbol '_binman_something_prop_' has invalid format",
             str(e.exception))
@@ -22,7 +22,7 @@ class TestImage(unittest.TestCase):
         image = Image('name', 'node', test=True)
         image._entries = {}
         with self.assertRaises(ValueError) as e:
-            image.LookupSymbol('_binman_type_prop_pname', False, 'msg', 0)
+            image.GetSymbolValue('_binman_type_prop_pname', False, 'msg', 0)
         self.assertIn("msg: Entry 'type' not found in list ()",
                       str(e.exception))
 
@@ -30,7 +30,7 @@ class TestImage(unittest.TestCase):
         image = Image('name', 'node', test=True)
         image._entries = {}
         with capture_sys_output() as (stdout, stderr):
-            val = image.LookupSymbol('_binman_type_prop_pname', True, 'msg', 0)
+            val = image.GetSymbolValue('_binman_type_prop_pname', True, 'msg', 0)
         self.assertEqual(val, None)
         self.assertEqual("Warning: msg: Entry 'type' not found in list ()\n",
                          stderr.getvalue())
@@ -40,5 +40,5 @@ class TestImage(unittest.TestCase):
         image = Image('name', 'node', test=True)
         image._entries = {'u-boot': 1}
         with self.assertRaises(ValueError) as e:
-            image.LookupSymbol('_binman_u_boot_prop_bad', False, 'msg', 0)
+            image.GetSymbolValue('_binman_u_boot_prop_bad', False, 'msg', 0)
         self.assertIn("msg: No such property 'bad", str(e.exception))
diff --git a/tools/binman/test/336_symbols_base.dts b/tools/binman/test/336_symbols_base.dts
new file mode 100644
index 00000000000..e4dccd38c22
--- /dev/null
+++ b/tools/binman/test/336_symbols_base.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		pad-byte = <0xff>;
+		u-boot-spl {
+			symbols-base = <0>;
+		};
+
+		u-boot {
+			offset = <0x1c>;
+		};
+
+		u-boot-spl2 {
+			type = "u-boot-spl";
+		};
+	};
+};
diff --git a/tools/binman/test/337_symbols_base_expand.dts b/tools/binman/test/337_symbols_base_expand.dts
new file mode 100644
index 00000000000..5a777ae63b8
--- /dev/null
+++ b/tools/binman/test/337_symbols_base_expand.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		pad-byte = <0xff>;
+		u-boot-spl {
+			symbols-base = <0>;
+		};
+
+		u-boot {
+			offset = <0x38>;
+			no-expanded;
+		};
+
+		u-boot-spl2 {
+			type = "u-boot-spl";
+		};
+	};
+};
diff --git a/tools/binman/test/338_symbols_comp.dts b/tools/binman/test/338_symbols_comp.dts
new file mode 100644
index 00000000000..15008507cfd
--- /dev/null
+++ b/tools/binman/test/338_symbols_comp.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		pad-byte = <0xff>;
+		u-boot-spl {
+		};
+
+		section {
+			offset = <0x1c>;
+			compress = "lz4";
+
+			u-boot {
+			};
+		};
+
+		u-boot-spl2 {
+			type = "u-boot-spl";
+		};
+	};
+};
diff --git a/tools/binman/test/339_nxp_imx8.dts b/tools/binman/test/339_nxp_imx8.dts
new file mode 100644
index 00000000000..cb512ae9aa2
--- /dev/null
+++ b/tools/binman/test/339_nxp_imx8.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		nxp-imx8mimage {
+			args;	/* TODO: Needed by mkimage etype superclass */
+			nxp,boot-from = "sd";
+			nxp,rom-version = <1>;
+			nxp,loader-address = <0x10>;
+		};
+	};
+};
diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py
index c4384f53e8d..4090d328b30 100644
--- a/tools/buildman/builder.py
+++ b/tools/buildman/builder.py
@@ -22,6 +22,7 @@ from buildman import toolchain
 from patman import gitutil
 from u_boot_pylib import command
 from u_boot_pylib import terminal
+from u_boot_pylib import tools
 from u_boot_pylib.terminal import tprint
 
 # This indicates an new int or hex Kconfig property with no default
@@ -263,7 +264,8 @@ class Builder:
                  adjust_cfg=None, allow_missing=False, no_lto=False,
                  reproducible_builds=False, force_build=False,
                  force_build_failures=False, force_reconfig=False,
-                 in_tree=False, force_config_on_failure=False, make_func=None):
+                 in_tree=False, force_config_on_failure=False, make_func=None,
+                 dtc_skip=False):
         """Create a new Builder object
 
         Args:
@@ -312,6 +314,7 @@ class Builder:
             force_config_on_failure (bool): Reconfigure the build before
                 retrying a failed build
             make_func (function): Function to call to run 'make'
+            dtc_skip (bool): True to skip building dtc and use the system one
         """
         self.toolchains = toolchains
         self.base_dir = base_dir
@@ -354,6 +357,12 @@ class Builder:
         self.in_tree = in_tree
         self.force_config_on_failure = force_config_on_failure
         self.fallback_mrproper = fallback_mrproper
+        if dtc_skip:
+            self.dtc = shutil.which('dtc')
+            if not self.dtc:
+                raise ValueError('Cannot find dtc')
+        else:
+            self.dtc = None
 
         if not self.squash_config_y:
             self.config_filenames += EXTRA_CONFIG_FILENAMES
@@ -407,6 +416,22 @@ class Builder:
     def signal_handler(self, signal, frame):
         sys.exit(1)
 
+    def make_environment(self, toolchain):
+        """Create the environment to use for building
+
+        Args:
+            toolchain (Toolchain): Toolchain to use for building
+
+        Returns:
+            dict:
+                key (str): Variable name
+                value (str): Variable value
+        """
+        env = toolchain.MakeEnvironment(self.full_path)
+        if self.dtc:
+            env[b'DTC'] = tools.to_bytes(self.dtc)
+        return env
+
     def set_display_options(self, show_errors=False, show_sizes=False,
                           show_detail=False, show_bloat=False,
                           list_error_boards=False, show_config=False,
diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py
index bbe2f6f0d24..b5afee61aff 100644
--- a/tools/buildman/builderthread.py
+++ b/tools/buildman/builderthread.py
@@ -406,7 +406,7 @@ class BuilderThread(threading.Thread):
                     the next incremental build
         """
         # Set up the environment and command line
-        env = self.toolchain.MakeEnvironment(self.builder.full_path)
+        env = self.builder.make_environment(self.toolchain)
         mkdir(out_dir)
 
         args, cwd, src_dir = self._build_args(brd, out_dir, out_rel_dir,
@@ -574,7 +574,7 @@ class BuilderThread(threading.Thread):
                 outf.write(f'{result.return_code}')
 
             # Write out the image and function size information and an objdump
-            env = result.toolchain.MakeEnvironment(self.builder.full_path)
+            env = self.builder.make_environment(self.toolchain)
             with open(os.path.join(build_dir, 'out-env'), 'wb') as outf:
                 for var in sorted(env.keys()):
                     outf.write(b'%s="%s"' % (var, env[var]))
@@ -755,6 +755,14 @@ class BuilderThread(threading.Thread):
                         self.mrproper, self.builder.config_only, True,
                         self.builder.force_build_failures, job.work_in_output,
                         job.adjust_cfg)
+            failed = result.return_code or result.stderr
+            if failed and not self.mrproper:
+                result, request_config = self.run_commit(None, brd, work_dir,
+                            True, self.builder.fallback_mrproper,
+                            self.builder.config_only, True,
+                            self.builder.force_build_failures,
+                            job.work_in_output, job.adjust_cfg)
+
             result.commit_upto = 0
             self._write_result(result, job.keep_outputs, job.work_in_output)
             self._send_result(result)
diff --git a/tools/buildman/buildman.rst b/tools/buildman/buildman.rst
index b8ff3bf1ab2..e873611e596 100644
--- a/tools/buildman/buildman.rst
+++ b/tools/buildman/buildman.rst
@@ -1030,6 +1030,9 @@ of the source tree, thus allowing rapid tested evolution of the code::
 
     ./tools/buildman/buildman -Pr tegra
 
+Note also the `--dtc-skip` option which uses the system device-tree compiler to
+avoid needing to build it for each board. This can save 10-20% of build time.
+An alternative is to set DTC=/path/to/dtc when running buildman.
 
 Checking configuration
 ----------------------
diff --git a/tools/buildman/cmdline.py b/tools/buildman/cmdline.py
index 544a391a464..7573e5bdfe8 100644
--- a/tools/buildman/cmdline.py
+++ b/tools/buildman/cmdline.py
@@ -46,6 +46,8 @@ def add_upto_m(parser):
           help='Show detailed size delta for each board in the -S summary')
     parser.add_argument('-D', '--debug', action='store_true',
         help='Enabling debugging (provides a full traceback on error)')
+    parser.add_argument('--dtc-skip', action='store_true', default=False,
+          help='Skip building of dtc and use the system version')
     parser.add_argument('-e', '--show_errors', action='store_true',
           default=False, help='Show errors and warnings')
     parser.add_argument('-E', '--warnings-as-errors', action='store_true',
diff --git a/tools/buildman/control.py b/tools/buildman/control.py
index d3d027f02ab..55d4d770c5c 100644
--- a/tools/buildman/control.py
+++ b/tools/buildman/control.py
@@ -809,7 +809,8 @@ def do_buildman(args, toolchains=None, make_func=None, brds=None,
             force_build = args.force_build,
             force_build_failures = args.force_build_failures,
             force_reconfig = args.force_reconfig, in_tree = args.in_tree,
-            force_config_on_failure=not args.quick, make_func=make_func)
+            force_config_on_failure=not args.quick, make_func=make_func,
+            dtc_skip=args.dtc_skip)
 
     TEST_BUILDER = builder
 
diff --git a/tools/buildman/test.py b/tools/buildman/test.py
index 5eed013d51c..15801f6097f 100644
--- a/tools/buildman/test.py
+++ b/tools/buildman/test.py
@@ -36,6 +36,16 @@ main: /usr/sbin
 x86: i386 x86_64
 '''
 
+settings_data_wrapper = '''
+# Buildman settings file
+
+[toolchain]
+main: /usr/sbin
+
+[toolchain-wrapper]
+wrapper = ccache
+'''
+
 migration = '''===================== WARNING ======================
 This board does not use CONFIG_DM. CONFIG_DM will be
 compulsory starting with the v2020.01 release.
@@ -606,6 +616,9 @@ class TestBuild(unittest.TestCase):
                          tc.GetEnvArgs(toolchain.VAR_ARCH))
         self.assertEqual('', tc.GetEnvArgs(toolchain.VAR_MAKE_ARGS))
 
+        tc = self.toolchains.Select('sandbox')
+        self.assertEqual('', tc.GetEnvArgs(toolchain.VAR_CROSS_COMPILE))
+
         self.toolchains.Add('/path/to/x86_64-linux-gcc', test=False)
         tc = self.toolchains.Select('x86')
         self.assertEqual('/path/to',
@@ -614,6 +627,39 @@ class TestBuild(unittest.TestCase):
         self.assertEqual('HOSTCC=clang CC=clang',
                          tc.GetEnvArgs(toolchain.VAR_MAKE_ARGS))
 
+        # Test config with ccache wrapper
+        bsettings.setup(None)
+        bsettings.add_file(settings_data_wrapper)
+
+        tc = self.toolchains.Select('arm')
+        self.assertEqual('ccache arm-linux-',
+                         tc.GetEnvArgs(toolchain.VAR_CROSS_COMPILE))
+
+        tc = self.toolchains.Select('sandbox')
+        self.assertEqual('', tc.GetEnvArgs(toolchain.VAR_CROSS_COMPILE))
+
+    def testMakeEnvironment(self):
+        """Test the MakeEnvironment function"""
+        tc = self.toolchains.Select('arm')
+        env = tc.MakeEnvironment(False)
+        self.assertEqual(env[b'CROSS_COMPILE'], b'arm-linux-')
+
+        tc = self.toolchains.Select('sandbox')
+        env = tc.MakeEnvironment(False)
+        self.assertTrue(b'CROSS_COMPILE' not in env)
+
+        # Test config with ccache wrapper
+        bsettings.setup(None)
+        bsettings.add_file(settings_data_wrapper)
+
+        tc = self.toolchains.Select('arm')
+        env = tc.MakeEnvironment(False)
+        self.assertEqual(env[b'CROSS_COMPILE'], b'ccache arm-linux-')
+
+        tc = self.toolchains.Select('sandbox')
+        env = tc.MakeEnvironment(False)
+        self.assertTrue(b'CROSS_COMPILE' not in env)
+
     def testPrepareOutputSpace(self):
         def _Touch(fname):
             tools.write_file(os.path.join(base_dir, fname), b'')
@@ -953,6 +999,37 @@ class TestBuild(unittest.TestCase):
         self.assertEqual(
             {b'CROSS_COMPILE': b'fred aarch64-linux-', b'LC_ALL': b'C'}, diff)
 
+    def test_skip_dtc(self):
+        """Test skipping building the dtc tool"""
+        old_path = os.getenv('PATH')
+        try:
+            os.environ['PATH'] = self.base_dir
+
+            # Check a missing tool
+            with self.assertRaises(ValueError) as exc:
+                builder.Builder(self.toolchains, self.base_dir, None, 0, 2,
+                                dtc_skip=True)
+            self.assertIn('Cannot find dtc', str(exc.exception))
+
+            # Create a fake tool to use
+            dtc = os.path.join(self.base_dir, 'dtc')
+            tools.write_file(dtc, b'xx')
+            os.chmod(dtc, 0o777)
+
+            build = builder.Builder(self.toolchains, self.base_dir, None, 0, 2,
+                                    dtc_skip=True)
+            toolchain = self.toolchains.Select('arm')
+            env = build.make_environment(toolchain)
+            self.assertIn(b'DTC', env)
+
+            # Try the normal case, i.e. not skipping the dtc build
+            build = builder.Builder(self.toolchains, self.base_dir, None, 0, 2)
+            toolchain = self.toolchains.Select('arm')
+            env = build.make_environment(toolchain)
+            self.assertNotIn(b'DTC', env)
+        finally:
+            os.environ['PATH'] = old_path
+
 
 if __name__ == "__main__":
     unittest.main()
diff --git a/tools/buildman/toolchain.py b/tools/buildman/toolchain.py
index 6ca79c2c0f9..a7d7883b851 100644
--- a/tools/buildman/toolchain.py
+++ b/tools/buildman/toolchain.py
@@ -159,6 +159,8 @@ class Toolchain:
         if which == VAR_CROSS_COMPILE:
             wrapper = self.GetWrapper()
             base = '' if self.arch == 'sandbox' else self.path
+            if (base == '' and self.cross == ''):
+                return ''
             return wrapper + os.path.join(base, self.cross)
         elif which == VAR_PATH:
             return self.path
@@ -208,10 +210,10 @@ class Toolchain:
         if self.override_toolchain:
             # We'll use MakeArgs() to provide this
             pass
-        elif full_path:
+        elif full_path and self.cross:
             env[b'CROSS_COMPILE'] = tools.to_bytes(
                 wrapper + os.path.join(self.path, self.cross))
-        else:
+        elif self.cross:
             env[b'CROSS_COMPILE'] = tools.to_bytes(wrapper + self.cross)
 
             # Detect a Python virtualenv and avoid defeating it
diff --git a/tools/image-sig-host.c b/tools/image-sig-host.c
index d0133aec4c8..21b4fa5d39d 100644
--- a/tools/image-sig-host.c
+++ b/tools/image-sig-host.c
@@ -76,6 +76,13 @@ struct crypto_algo crypto_algos[] = {
 		.add_verify_data = ecdsa_add_verify_data,
 		.verify = ecdsa_verify,
 	},
+	{
+		.name = "secp521r1",
+		.key_len = ECDSA521_BYTES,
+		.sign = ecdsa_sign,
+		.add_verify_data = ecdsa_add_verify_data,
+		.verify = ecdsa_verify,
+	},
 };
 
 struct padding_algo padding_algos[] = {