1 files changed, 0 insertions, 116 deletions
diff --git a/arch/arm/cpu/arm926ejs/spear/cpu.c b/arch/arm/cpu/arm926ejs/spear/cpu.c
deleted file mode 100644
index 21065410746..00000000000
--- a/arch/arm/cpu/arm926ejs/spear/cpu.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_misc.h>
-
-int arch_cpu_init(void)
-{
-	struct misc_regs *const misc_p =
-	    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
-	u32 periph1_clken, periph_clk_cfg;
-
-	periph1_clken = readl(&misc_p->periph1_clken);
-
-#if defined(CONFIG_SPEAR3XX)
-	periph1_clken |= MISC_GPT2ENB;
-#elif defined(CONFIG_SPEAR600)
-	periph1_clken |= MISC_GPT3ENB;
-#endif
-
-#if defined(CONFIG_PL011_SERIAL)
-	periph1_clken |= MISC_UART0ENB;
-
-	periph_clk_cfg = readl(&misc_p->periph_clk_cfg);
-	periph_clk_cfg &= ~CONFIG_SPEAR_UARTCLKMSK;
-	periph_clk_cfg |= CONFIG_SPEAR_UART48M;
-	writel(periph_clk_cfg, &misc_p->periph_clk_cfg);
-#endif
-#if defined(CONFIG_ETH_DESIGNWARE)
-	periph1_clken |= MISC_ETHENB;
-#endif
-#if defined(CONFIG_DW_UDC)
-	periph1_clken |= MISC_USBDENB;
-#endif
-#if defined(CONFIG_SYS_I2C_DW)
-	periph1_clken |= MISC_I2CENB;
-#endif
-#if defined(CONFIG_ST_SMI)
-	periph1_clken |= MISC_SMIENB;
-#endif
-#if defined(CONFIG_NAND_FSMC)
-	periph1_clken |= MISC_FSMCENB;
-#endif
-#if defined(CONFIG_USB_EHCI_SPEAR)
-	periph1_clken |= PERIPH_USBH1 | PERIPH_USBH2;
-#endif
-#if defined(CONFIG_SPEAR_GPIO)
-	periph1_clken |= MISC_GPIO3ENB | MISC_GPIO4ENB;
-#endif
-#if defined(CONFIG_PL022_SPI)
-	periph1_clken |= MISC_SSP1ENB | MISC_SSP2ENB | MISC_SSP3ENB;
-#endif
-
-	writel(periph1_clken, &misc_p->periph1_clken);
-
-	return 0;
-}
-
-#ifdef CONFIG_DISPLAY_CPUINFO
-int print_cpuinfo(void)
-{
-#ifdef CONFIG_SPEAR300
-	printf("CPU:   SPEAr300\n");
-#elif defined(CONFIG_SPEAR310)
-	printf("CPU:   SPEAr310\n");
-#elif defined(CONFIG_SPEAR320)
-	printf("CPU:   SPEAr320\n");
-#elif defined(CONFIG_SPEAR600)
-	printf("CPU:   SPEAr600\n");
-#else
-#error CPU not supported in spear platform
-#endif
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_ECC_BCH) && defined(CONFIG_NAND_FSMC)
-static int do_switch_ecc(struct cmd_tbl *cmdtp, int flag, int argc,
-			 char *const argv[])
-{
-	if (argc != 2)
-		goto usage;
-
-	if (strncmp(argv[1], "hw", 2) == 0) {
-		/* 1-bit HW ECC */
-		printf("Switching to 1-bit HW ECC\n");
-		fsmc_nand_switch_ecc(1);
-	} else if (strncmp(argv[1], "bch4", 2) == 0) {
-		/* 4-bit SW ECC BCH4 */
-		printf("Switching to 4-bit SW ECC (BCH4)\n");
-		fsmc_nand_switch_ecc(4);
-	} else {
-		goto usage;
-	}
-
-	return 0;
-
-usage:
-	printf("Usage: nandecc %s\n", cmdtp->usage);
-	return 1;
-}
-
-U_BOOT_CMD(
-	nandecc, 2, 0,	do_switch_ecc,
-	"switch NAND ECC calculation algorithm",
-	"hw|bch4 - Switch between NAND hardware 1-bit HW and"
-	" 4-bit SW BCH\n"
-);
-#endif