diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/spear/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/spear/cpu.c | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/spear/spr_lowlevel_init.S | 174 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/spear/spr_misc.c | 249 |
4 files changed, 426 insertions, 1 deletions
diff --git a/arch/arm/cpu/arm926ejs/spear/Makefile b/arch/arm/cpu/arm926ejs/spear/Makefile index 7b15d4ef7ef..39924015907 100644 --- a/arch/arm/cpu/arm926ejs/spear/Makefile +++ b/arch/arm/cpu/arm926ejs/spear/Makefile @@ -16,6 +16,8 @@ obj-$(CONFIG_DDR_MT47H64M16) += spr600_mt47h64m16_3_333_cl5_psync.o obj-$(CONFIG_DDR_MT47H32M16) += spr600_mt47h32m16_333_cl5_psync.o obj-$(CONFIG_DDR_MT47H32M16) += spr600_mt47h32m16_37e_166_cl4_sync.o obj-$(CONFIG_DDR_MT47H128M8) += spr600_mt47h128m8_3_266_cl5_async.o +else +obj-y += spr_misc.o spr_lowlevel_init.o endif extra-$(CONFIG_SPL_BUILD) := start.o diff --git a/arch/arm/cpu/arm926ejs/spear/cpu.c b/arch/arm/cpu/arm926ejs/spear/cpu.c index be0d14fbf04..7b9dc65c270 100644 --- a/arch/arm/cpu/arm926ejs/spear/cpu.c +++ b/arch/arm/cpu/arm926ejs/spear/cpu.c @@ -84,7 +84,7 @@ int print_cpuinfo(void) } #endif -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_ECC_BCH) +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_ECC_BCH) && defined(CONFIG_NAND_FSMC) static int do_switch_ecc(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/arch/arm/cpu/arm926ejs/spear/spr_lowlevel_init.S b/arch/arm/cpu/arm926ejs/spear/spr_lowlevel_init.S new file mode 100644 index 00000000000..649488399a6 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/spear/spr_lowlevel_init.S @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2006 + * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> + +/* + * platform specific initializations are already done in Xloader + * Initializations already done include + * DDR, PLLs, IP's clock enable and reset release etc + */ +.globl lowlevel_init +lowlevel_init: + mov pc, lr + +/* void setfreq(unsigned int device, unsigned int frequency) */ +.global setfreq +setfreq: + stmfd sp!,{r14} + stmfd sp!,{r0-r12} + + mov r8,sp + ldr sp,SRAM_STACK_V + + /* Saving the function arguements for later use */ + mov r4,r0 + mov r5,r1 + + /* Putting DDR into self refresh */ + ldr r0,DDR_07_V + ldr r1,[r0] + ldr r2,DDR_ACTIVE_V + bic r1, r1, r2 + str r1,[r0] + ldr r0,DDR_57_V + ldr r1,[r0] + ldr r2,CYCLES_MASK_V + bic r1, r1, r2 + ldr r2,REFRESH_CYCLES_V + orr r1, r1, r2, lsl #16 + str r1,[r0] + ldr r0,DDR_07_V + ldr r1,[r0] + ldr r2,SREFRESH_MASK_V + orr r1, r1, r2 + str r1,[r0] + + /* flush pipeline */ + b flush + .align 5 +flush: + /* Delay to ensure self refresh mode */ + ldr r0,SREFRESH_DELAY_V +delay: + sub r0,r0,#1 + cmp r0,#0 + bne delay + + /* Putting system in slow mode */ + ldr r0,SCCTRL_V + mov r1,#2 + str r1,[r0] + + /* Changing PLL(1/2) frequency */ + mov r0,r4 + mov r1,r5 + + cmp r4,#0 + beq pll1_freq + + /* Change PLL2 (DDR frequency) */ + ldr r6,PLL2_FREQ_V + ldr r7,PLL2_CNTL_V + b pll2_freq + +pll1_freq: + /* Change PLL1 (CPU frequency) */ + ldr r6,PLL1_FREQ_V + ldr r7,PLL1_CNTL_V + +pll2_freq: + mov r0,r6 + ldr r1,[r0] + ldr r2,PLLFREQ_MASK_V + bic r1,r1,r2 + mov r2,r5,lsr#1 + orr r1,r1,r2,lsl#24 + str r1,[r0] + + mov r0,r7 + ldr r1,P1C0A_V + str r1,[r0] + ldr r1,P1C0E_V + str r1,[r0] + ldr r1,P1C06_V + str r1,[r0] + ldr r1,P1C0E_V + str r1,[r0] + +lock: + ldr r1,[r0] + and r1,r1,#1 + cmp r1,#0 + beq lock + + /* Putting system back to normal mode */ + ldr r0,SCCTRL_V + mov r1,#4 + str r1,[r0] + + /* Putting DDR back to normal */ + ldr r0,DDR_07_V + ldr r1,[R0] + ldr r2,SREFRESH_MASK_V + bic r1, r1, r2 + str r1,[r0] + ldr r2,DDR_ACTIVE_V + orr r1, r1, r2 + str r1,[r0] + + /* Delay to ensure self refresh mode */ + ldr r0,SREFRESH_DELAY_V +1: + sub r0,r0,#1 + cmp r0,#0 + bne 1b + + mov sp,r8 + /* Resuming back to code */ + ldmia sp!,{r0-r12} + ldmia sp!,{pc} + +SCCTRL_V: + .word 0xfca00000 +PLL1_FREQ_V: + .word 0xfca8000C +PLL1_CNTL_V: + .word 0xfca80008 +PLL2_FREQ_V: + .word 0xfca80018 +PLL2_CNTL_V: + .word 0xfca80014 +PLLFREQ_MASK_V: + .word 0xff000000 +P1C0A_V: + .word 0x1C0A +P1C0E_V: + .word 0x1C0E +P1C06_V: + .word 0x1C06 + +SREFRESH_DELAY_V: + .word 0x9999 +SRAM_STACK_V: + .word 0xD2800600 +DDR_07_V: + .word 0xfc60001c +DDR_ACTIVE_V: + .word 0x01000000 +DDR_57_V: + .word 0xfc6000e4 +CYCLES_MASK_V: + .word 0xffff0000 +REFRESH_CYCLES_V: + .word 0xf0f0 +SREFRESH_MASK_V: + .word 0x00010000 + +.global setfreq_sz +setfreq_sz: + .word setfreq_sz - setfreq diff --git a/arch/arm/cpu/arm926ejs/spear/spr_misc.c b/arch/arm/cpu/arm926ejs/spear/spr_misc.c new file mode 100644 index 00000000000..a02304f49ee --- /dev/null +++ b/arch/arm/cpu/arm926ejs/spear/spr_misc.c @@ -0,0 +1,249 @@ +/* + * (C) Copyright 2009 + * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <net.h> +#include <linux/mtd/st_smi.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/spr_emi.h> +#include <asm/arch/spr_defs.h> + +#define CPU 0 +#define DDR 1 +#define SRAM_REL 0xD2801000 + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) +static int i2c_read_mac(uchar *buffer); +#endif + +int dram_init(void) +{ + /* Store complete RAM size and return */ + gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE); + + return 0; +} + +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = gd->ram_size; + + return 0; +} + +int board_early_init_f() +{ +#if defined(CONFIG_ST_SMI) + smi_init(); +#endif + return 0; +} +int misc_init_r(void) +{ +#if defined(CONFIG_CMD_NET) + uchar mac_id[6]; + + if (!eth_env_get_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id)) + eth_env_set_enetaddr("ethaddr", mac_id); +#endif + env_set("verify", "n"); + +#if defined(CONFIG_SPEAR_USBTTY) + env_set("stdin", "usbtty"); + env_set("stdout", "usbtty"); + env_set("stderr", "usbtty"); + +#ifndef CONFIG_SYS_NO_DCACHE + dcache_enable(); +#endif +#endif + return 0; +} + +#ifdef CONFIG_SPEAR_EMI +struct cust_emi_para { + unsigned int tap; + unsigned int tsdp; + unsigned int tdpw; + unsigned int tdpr; + unsigned int tdcs; +}; + +/* EMI timing setting of m28w640hc of linux kernel */ +const struct cust_emi_para emi_timing_m28w640hc = { + .tap = 0x10, + .tsdp = 0x05, + .tdpw = 0x0a, + .tdpr = 0x0a, + .tdcs = 0x05, +}; + +/* EMI timing setting of bootrom */ +const struct cust_emi_para emi_timing_bootrom = { + .tap = 0xf, + .tsdp = 0x0, + .tdpw = 0xff, + .tdpr = 0x111, + .tdcs = 0x02, +}; + +void spear_emi_init(void) +{ + const struct cust_emi_para *p = &emi_timing_m28w640hc; + struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE; + unsigned int cs; + unsigned int val, tmp; + + val = readl(CONFIG_SPEAR_RASBASE); + + if (val & EMI_ACKMSK) + tmp = 0x3f; + else + tmp = 0x0; + + writel(tmp, &emi_regs_p->ack); + + for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) { + writel(p->tap, &emi_regs_p->bank_regs[cs].tap); + writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp); + writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw); + writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr); + writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs); + writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3), + &emi_regs_p->bank_regs[cs].control); + } +} +#endif + +int spear_board_init(ulong mach_type) +{ + gd->bd->bi_arch_number = mach_type; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR; + +#ifdef CONFIG_SPEAR_EMI + spear_emi_init(); +#endif + return 0; +} + +#if defined(CONFIG_CMD_NET) +static int i2c_read_mac(uchar *buffer) +{ + u8 buf[2]; + + i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN); + + /* Check if mac in i2c memory is valid */ + if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) { + /* Valid mac address is saved in i2c eeprom */ + i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN); + return 0; + } + + return -1; +} + +static int write_mac(uchar *mac) +{ + u8 buf[2]; + + buf[0] = (u8)MAGIC_BYTE0; + buf[1] = (u8)MAGIC_BYTE1; + i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN); + + buf[0] = (u8)~MAGIC_BYTE0; + buf[1] = (u8)~MAGIC_BYTE1; + + i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN); + + /* check if valid MAC address is saved in I2C EEPROM or not? */ + if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) { + i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN); + puts("I2C EEPROM written with mac address \n"); + return 0; + } + + puts("I2C EEPROM writing failed\n"); + return -1; +} +#endif + +int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + void (*sram_setfreq) (unsigned int, unsigned int); + unsigned int frequency; +#if defined(CONFIG_CMD_NET) + unsigned char mac[6]; +#endif + + if ((argc > 3) || (argc < 2)) + return cmd_usage(cmdtp); + + if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) { + + frequency = simple_strtoul(argv[2], NULL, 0); + + if (frequency > 333) { + printf("Frequency is limited to 333MHz\n"); + return 1; + } + + sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz); + + if (!strcmp(argv[1], "cpufreq")) { + sram_setfreq(CPU, frequency); + printf("CPU frequency changed to %u\n", frequency); + } else { + sram_setfreq(DDR, frequency); + printf("DDR frequency changed to %u\n", frequency); + } + + return 0; + +#if defined(CONFIG_CMD_NET) + } else if (!strcmp(argv[1], "ethaddr")) { + + u32 reg; + char *e, *s = argv[2]; + for (reg = 0; reg < 6; ++reg) { + mac[reg] = s ? simple_strtoul(s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + write_mac(mac); + + return 0; +#endif + } else if (!strcmp(argv[1], "print")) { +#if defined(CONFIG_CMD_NET) + if (!i2c_read_mac(mac)) { + printf("Ethaddr (from i2c mem) = %pM\n", mac); + } else { + printf("Ethaddr (from i2c mem) = Not set\n"); + } +#endif + return 0; + } + + return cmd_usage(cmdtp); +} + +U_BOOT_CMD(chip_config, 3, 1, do_chip_config, + "configure chip", + "chip_config cpufreq/ddrfreq frequency\n" +#if defined(CONFIG_CMD_NET) + "chip_config ethaddr XX:XX:XX:XX:XX:XX\n" +#endif + "chip_config print"); |